diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/reset/uniphier-reset.txt | 176 |
1 files changed, 176 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt new file mode 100644 index 000000000..101743dda --- /dev/null +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -0,0 +1,176 @@ +UniPhier reset controller + + +System reset +------------ + +Required properties: +- compatible: should be one of the following: + "socionext,uniphier-ld4-reset" - for LD4 SoC + "socionext,uniphier-pro4-reset" - for Pro4 SoC + "socionext,uniphier-sld8-reset" - for sLD8 SoC + "socionext,uniphier-pro5-reset" - for Pro5 SoC + "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC + "socionext,uniphier-ld11-reset" - for LD11 SoC + "socionext,uniphier-ld20-reset" - for LD20 SoC + "socionext,uniphier-pxs3-reset" - for PXs3 SoC +- #reset-cells: should be 1. + +Example: + + sysctrl@61840000 { + compatible = "socionext,uniphier-ld11-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + reset { + compatible = "socionext,uniphier-ld11-reset"; + #reset-cells = <1>; + }; + + other nodes ... + }; + + +Media I/O (MIO) reset, SD reset +------------------------------- + +Required properties: +- compatible: should be one of the following: + "socionext,uniphier-ld4-mio-reset" - for LD4 SoC + "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC + "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC + "socionext,uniphier-pro5-sd-reset" - for Pro5 SoC + "socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC + "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO) + "socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD) + "socionext,uniphier-ld20-sd-reset" - for LD20 SoC + "socionext,uniphier-pxs3-sd-reset" - for PXs3 SoC +- #reset-cells: should be 1. + +Example: + + mioctrl@59810000 { + compatible = "socionext,uniphier-ld11-mioctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + reset { + compatible = "socionext,uniphier-ld11-mio-reset"; + #reset-cells = <1>; + }; + + other nodes ... + }; + + +Peripheral reset +---------------- + +Required properties: +- compatible: should be one of the following: + "socionext,uniphier-ld4-peri-reset" - for LD4 SoC + "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC + "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC + "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC + "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC + "socionext,uniphier-ld11-peri-reset" - for LD11 SoC + "socionext,uniphier-ld20-peri-reset" - for LD20 SoC + "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC +- #reset-cells: should be 1. + +Example: + + perictrl@59820000 { + compatible = "socionext,uniphier-ld11-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + reset { + compatible = "socionext,uniphier-ld11-peri-reset"; + #reset-cells = <1>; + }; + + other nodes ... + }; + + +Analog signal amplifier reset +----------------------------- + +Required properties: +- compatible: should be one of the following: + "socionext,uniphier-ld11-adamv-reset" - for LD11 SoC + "socionext,uniphier-ld20-adamv-reset" - for LD20 SoC +- #reset-cells: should be 1. + +Example: + + adamv@57920000 { + compatible = "socionext,uniphier-ld11-adamv", + "simple-mfd", "syscon"; + reg = <0x57920000 0x1000>; + + adamv_rst: reset { + compatible = "socionext,uniphier-ld11-adamv-reset"; + #reset-cells = <1>; + }; + + other nodes ... + }; + + +USB3 core reset +--------------- + +USB3 core reset belongs to USB3 glue layer. Before using the core reset, +it is necessary to control the clocks and resets to enable this layer. +These clocks and resets should be described in each property. + +Required properties: +- compatible: Should be + "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC + "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC + "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC + "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC +- #reset-cells: Should be 1. +- reg: Specifies offset and length of the register set for the device. +- clocks: A list of phandles to the clock gate for USB3 glue layer. + According to the clock-names, appropriate clocks are required. +- clock-names: Should contain + "gio", "link" - for Pro4 SoC + "link" - for others +- resets: A list of phandles to the reset control for USB3 glue layer. + According to the reset-names, appropriate resets are required. +- reset-names: Should contain + "gio", "link" - for Pro4 SoC + "link" - for others + +Example: + + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_rst: reset@0 { + compatible = "socionext,uniphier-ld20-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + regulator { + ... + }; + + phy { + ... + }; + ... + }; |