diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/infiniband/user_mad.txt | 153 |
1 files changed, 153 insertions, 0 deletions
diff --git a/Documentation/infiniband/user_mad.txt b/Documentation/infiniband/user_mad.txt new file mode 100644 index 000000000..7aca13a54 --- /dev/null +++ b/Documentation/infiniband/user_mad.txt @@ -0,0 +1,153 @@ +USERSPACE MAD ACCESS + +Device files + + Each port of each InfiniBand device has a "umad" device and an + "issm" device attached. For example, a two-port HCA will have two + umad devices and two issm devices, while a switch will have one + device of each type (for switch port 0). + +Creating MAD agents + + A MAD agent can be created by filling in a struct ib_user_mad_reg_req + and then calling the IB_USER_MAD_REGISTER_AGENT ioctl on a file + descriptor for the appropriate device file. If the registration + request succeeds, a 32-bit id will be returned in the structure. + For example: + + struct ib_user_mad_reg_req req = { /* ... */ }; + ret = ioctl(fd, IB_USER_MAD_REGISTER_AGENT, (char *) &req); + if (!ret) + my_agent = req.id; + else + perror("agent register"); + + Agents can be unregistered with the IB_USER_MAD_UNREGISTER_AGENT + ioctl. Also, all agents registered through a file descriptor will + be unregistered when the descriptor is closed. + + 2014 -- a new registration ioctl is now provided which allows additional + fields to be provided during registration. + Users of this registration call are implicitly setting the use of + pkey_index (see below). + +Receiving MADs + + MADs are received using read(). The receive side now supports + RMPP. The buffer passed to read() must be at least one + struct ib_user_mad + 256 bytes. For example: + + If the buffer passed is not large enough to hold the received + MAD (RMPP), the errno is set to ENOSPC and the length of the + buffer needed is set in mad.length. + + Example for normal MAD (non RMPP) reads: + struct ib_user_mad *mad; + mad = malloc(sizeof *mad + 256); + ret = read(fd, mad, sizeof *mad + 256); + if (ret != sizeof mad + 256) { + perror("read"); + free(mad); + } + + Example for RMPP reads: + struct ib_user_mad *mad; + mad = malloc(sizeof *mad + 256); + ret = read(fd, mad, sizeof *mad + 256); + if (ret == -ENOSPC)) { + length = mad.length; + free(mad); + mad = malloc(sizeof *mad + length); + ret = read(fd, mad, sizeof *mad + length); + } + if (ret < 0) { + perror("read"); + free(mad); + } + + In addition to the actual MAD contents, the other struct ib_user_mad + fields will be filled in with information on the received MAD. For + example, the remote LID will be in mad.lid. + + If a send times out, a receive will be generated with mad.status set + to ETIMEDOUT. Otherwise when a MAD has been successfully received, + mad.status will be 0. + + poll()/select() may be used to wait until a MAD can be read. + +Sending MADs + + MADs are sent using write(). The agent ID for sending should be + filled into the id field of the MAD, the destination LID should be + filled into the lid field, and so on. The send side does support + RMPP so arbitrary length MAD can be sent. For example: + + struct ib_user_mad *mad; + + mad = malloc(sizeof *mad + mad_length); + + /* fill in mad->data */ + + mad->hdr.id = my_agent; /* req.id from agent registration */ + mad->hdr.lid = my_dest; /* in network byte order... */ + /* etc. */ + + ret = write(fd, &mad, sizeof *mad + mad_length); + if (ret != sizeof *mad + mad_length) + perror("write"); + +Transaction IDs + + Users of the umad devices can use the lower 32 bits of the + transaction ID field (that is, the least significant half of the + field in network byte order) in MADs being sent to match + request/response pairs. The upper 32 bits are reserved for use by + the kernel and will be overwritten before a MAD is sent. + +P_Key Index Handling + + The old ib_umad interface did not allow setting the P_Key index for + MADs that are sent and did not provide a way for obtaining the P_Key + index of received MADs. A new layout for struct ib_user_mad_hdr + with a pkey_index member has been defined; however, to preserve binary + compatibility with older applications, this new layout will not be used + unless one of IB_USER_MAD_ENABLE_PKEY or IB_USER_MAD_REGISTER_AGENT2 ioctl's + are called before a file descriptor is used for anything else. + + In September 2008, the IB_USER_MAD_ABI_VERSION will be incremented + to 6, the new layout of struct ib_user_mad_hdr will be used by + default, and the IB_USER_MAD_ENABLE_PKEY ioctl will be removed. + +Setting IsSM Capability Bit + + To set the IsSM capability bit for a port, simply open the + corresponding issm device file. If the IsSM bit is already set, + then the open call will block until the bit is cleared (or return + immediately with errno set to EAGAIN if the O_NONBLOCK flag is + passed to open()). The IsSM bit will be cleared when the issm file + is closed. No read, write or other operations can be performed on + the issm file. + +/dev files + + To create the appropriate character device files automatically with + udev, a rule like + + KERNEL=="umad*", NAME="infiniband/%k" + KERNEL=="issm*", NAME="infiniband/%k" + + can be used. This will create device nodes named + + /dev/infiniband/umad0 + /dev/infiniband/issm0 + + for the first port, and so on. The InfiniBand device and port + associated with these devices can be determined from the files + + /sys/class/infiniband_mad/umad0/ibdev + /sys/class/infiniband_mad/umad0/port + + and + + /sys/class/infiniband_mad/issm0/ibdev + /sys/class/infiniband_mad/issm0/port |