diff options
Diffstat (limited to '')
49 files changed, 16262 insertions, 0 deletions
diff --git a/Documentation/media/v4l-drivers/au0828-cardlist.rst b/Documentation/media/v4l-drivers/au0828-cardlist.rst new file mode 100644 index 000000000..bb87b7b36 --- /dev/null +++ b/Documentation/media/v4l-drivers/au0828-cardlist.rst @@ -0,0 +1,37 @@ +AU0828 cards list +================= + +.. tabularcolumns:: |p{1.4cm}|p{6.5cm}|p{10.0cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - USB IDs + + * - 0 + - Unknown board + - + + * - 1 + - Hauppauge HVR950Q + - 2040:7200, 2040:7210, 2040:7217, 2040:721b, 2040:721e, 2040:721f, 2040:7280, 0fd9:0008, 2040:7260, 2040:7213, 2040:7270 + + * - 2 + - Hauppauge HVR850 + - 2040:7240 + + * - 3 + - DViCO FusionHDTV USB + - 0fe9:d620 + + * - 4 + - Hauppauge HVR950Q rev xxF8 + - 2040:7201, 2040:7211, 2040:7281 + + * - 5 + - Hauppauge Woodbury + - 05e1:0480, 2040:8200 diff --git a/Documentation/media/v4l-drivers/bttv-cardlist.rst b/Documentation/media/v4l-drivers/bttv-cardlist.rst new file mode 100644 index 000000000..8da27b924 --- /dev/null +++ b/Documentation/media/v4l-drivers/bttv-cardlist.rst @@ -0,0 +1,681 @@ +BTTV cards list +=============== + +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - PCI IDs + + * - 0 + - *** UNKNOWN/GENERIC *** + - + + * - 1 + - MIRO PCTV + - + + * - 2 + - Hauppauge (bt848) + - + + * - 3 + - STB, Gateway P/N 6000699 (bt848) + - + + * - 4 + - Intel Create and Share PCI/ Smart Video Recorder III + - + + * - 5 + - Diamond DTV2000 + - + + * - 6 + - AVerMedia TVPhone + - + + * - 7 + - MATRIX-Vision MV-Delta + - + + * - 8 + - Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26 + - + + * - 9 + - IMS/IXmicro TurboTV + - + + * - 10 + - Hauppauge (bt878) + - 0070:13eb, 0070:3900, 2636:10b4 + + * - 11 + - MIRO PCTV pro + - + + * - 12 + - ADS Technologies Channel Surfer TV (bt848) + - + + * - 13 + - AVerMedia TVCapture 98 + - 1461:0002, 1461:0004, 1461:0300 + + * - 14 + - Aimslab Video Highway Xtreme (VHX) + - + + * - 15 + - Zoltrix TV-Max + - a1a0:a0fc + + * - 16 + - Prolink Pixelview PlayTV (bt878) + - + + * - 17 + - Leadtek WinView 601 + - + + * - 18 + - AVEC Intercapture + - + + * - 19 + - Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only) + - + + * - 20 + - CEI Raffles Card + - + + * - 21 + - Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50 + - + + * - 22 + - Askey CPH050/ Phoebe Tv Master + FM + - 14ff:3002 + + * - 23 + - Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878 + - 14c7:0101 + + * - 24 + - Askey CPH05X/06X (bt878) [many vendors] + - 144f:3002, 144f:3005, 144f:5000, 14ff:3000 + + * - 25 + - Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar + - + + * - 26 + - Hauppauge WinCam newer (bt878) + - + + * - 27 + - Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50 + - + + * - 28 + - Terratec TerraTV+ Version 1.1 (bt878) + - 153b:1127, 1852:1852 + + * - 29 + - Imagenation PXC200 + - 1295:200a + + * - 30 + - Lifeview FlyVideo 98 LR50 + - 1f7f:1850 + + * - 31 + - Formac iProTV, Formac ProTV I (bt848) + - + + * - 32 + - Intel Create and Share PCI/ Smart Video Recorder III + - + + * - 33 + - Terratec TerraTValue Version Bt878 + - 153b:1117, 153b:1118, 153b:1119, 153b:111a, 153b:1134, 153b:5018 + + * - 34 + - Leadtek WinFast 2000/ WinFast 2000 XP + - 107d:6606, 107d:6609, 6606:217d, f6ff:fff6 + + * - 35 + - Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II + - 1851:1850, 1851:a050 + + * - 36 + - Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner + - 1852:1852 + + * - 37 + - Prolink PixelView PlayTV pro + - + + * - 38 + - Askey CPH06X TView99 + - 144f:3000, 144f:a005, a04f:a0fc + + * - 39 + - Pinnacle PCTV Studio/Rave + - 11bd:0012, bd11:1200, bd11:ff00, 11bd:ff12 + + * - 40 + - STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100 + - 10b4:2636, 10b4:2645, 121a:3060 + + * - 41 + - AVerMedia TVPhone 98 + - 1461:0001, 1461:0003 + + * - 42 + - ProVideo PV951 + - aa0c:146c + + * - 43 + - Little OnAir TV + - + + * - 44 + - Sigma TVII-FM + - + + * - 45 + - MATRIX-Vision MV-Delta 2 + - + + * - 46 + - Zoltrix Genie TV/FM + - 15b0:4000, 15b0:400a, 15b0:400d, 15b0:4010, 15b0:4016 + + * - 47 + - Terratec TV/Radio+ + - 153b:1123 + + * - 48 + - Askey CPH03x/ Dynalink Magic TView + - + + * - 49 + - IODATA GV-BCTV3/PCI + - 10fc:4020 + + * - 50 + - Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP + - + + * - 51 + - Eagle Wireless Capricorn2 (bt878A) + - + + * - 52 + - Pinnacle PCTV Studio Pro + - + + * - 53 + - Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS + - + + * - 54 + - Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90] + - + + * - 55 + - Askey CPH031/ BESTBUY Easy TV + - + + * - 56 + - Lifeview FlyVideo 98FM LR50 + - a051:41a0 + + * - 57 + - GrandTec 'Grand Video Capture' (Bt848) + - 4344:4142 + + * - 58 + - Askey CPH060/ Phoebe TV Master Only (No FM) + - + + * - 59 + - Askey CPH03x TV Capturer + - + + * - 60 + - Modular Technology MM100PCTV + - + + * - 61 + - AG Electronics GMV1 + - 15cb:0101 + + * - 62 + - Askey CPH061/ BESTBUY Easy TV (bt878) + - + + * - 63 + - ATI TV-Wonder + - 1002:0001 + + * - 64 + - ATI TV-Wonder VE + - 1002:0003 + + * - 65 + - Lifeview FlyVideo 2000S LR90 + - + + * - 66 + - Terratec TValueRadio + - 153b:1135, 153b:ff3b + + * - 67 + - IODATA GV-BCTV4/PCI + - 10fc:4050 + + * - 68 + - 3Dfx VoodooTV FM (Euro) + - 10b4:2637 + + * - 69 + - Active Imaging AIMMS + - + + * - 70 + - Prolink Pixelview PV-BT878P+ (Rev.4C,8E) + - + + * - 71 + - Lifeview FlyVideo 98EZ (capture only) LR51 + - 1851:1851 + + * - 72 + - Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) + - 1554:4011 + + * - 73 + - Sensoray 311/611 + - 6000:0311, 6000:0611 + + * - 74 + - RemoteVision MX (RV605) + - + + * - 75 + - Powercolor MTV878/ MTV878R/ MTV878F + - + + * - 76 + - Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP) + - 0e11:0079 + + * - 77 + - GrandTec Multi Capture Card (Bt878) + - + + * - 78 + - Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF + - 0a01:17de + + * - 79 + - DSP Design TCVIDEO + - + + * - 80 + - Hauppauge WinTV PVR + - 0070:4500 + + * - 81 + - IODATA GV-BCTV5/PCI + - 10fc:4070, 10fc:d018 + + * - 82 + - Osprey 100/150 (878) + - 0070:ff00 + + * - 83 + - Osprey 100/150 (848) + - + + * - 84 + - Osprey 101 (848) + - + + * - 85 + - Osprey 101/151 + - + + * - 86 + - Osprey 101/151 w/ svid + - + + * - 87 + - Osprey 200/201/250/251 + - + + * - 88 + - Osprey 200/250 + - 0070:ff01 + + * - 89 + - Osprey 210/220/230 + - + + * - 90 + - Osprey 500 + - 0070:ff02 + + * - 91 + - Osprey 540 + - 0070:ff04 + + * - 92 + - Osprey 2000 + - 0070:ff03 + + * - 93 + - IDS Eagle + - + + * - 94 + - Pinnacle PCTV Sat + - 11bd:001c + + * - 95 + - Formac ProTV II (bt878) + - + + * - 96 + - MachTV + - + + * - 97 + - Euresys Picolo + - + + * - 98 + - ProVideo PV150 + - aa00:1460, aa01:1461, aa02:1462, aa03:1463, aa04:1464, aa05:1465, aa06:1466, aa07:1467 + + * - 99 + - AD-TVK503 + - + + * - 100 + - Hercules Smart TV Stereo + - + + * - 101 + - Pace TV & Radio Card + - + + * - 102 + - IVC-200 + - 0000:a155, 0001:a155, 0002:a155, 0003:a155, 0100:a155, 0101:a155, 0102:a155, 0103:a155, 0800:a155, 0801:a155, 0802:a155, 0803:a155 + + * - 103 + - Grand X-Guard / Trust 814PCI + - 0304:0102 + + * - 104 + - Nebula Electronics DigiTV + - 0071:0101 + + * - 105 + - ProVideo PV143 + - aa00:1430, aa00:1431, aa00:1432, aa00:1433, aa03:1433 + + * - 106 + - PHYTEC VD-009-X1 VD-011 MiniDIN (bt878) + - + + * - 107 + - PHYTEC VD-009-X1 VD-011 Combi (bt878) + - + + * - 108 + - PHYTEC VD-009 MiniDIN (bt878) + - + + * - 109 + - PHYTEC VD-009 Combi (bt878) + - + + * - 110 + - IVC-100 + - ff00:a132 + + * - 111 + - IVC-120G + - ff00:a182, ff01:a182, ff02:a182, ff03:a182, ff04:a182, ff05:a182, ff06:a182, ff07:a182, ff08:a182, ff09:a182, ff0a:a182, ff0b:a182, ff0c:a182, ff0d:a182, ff0e:a182, ff0f:a182 + + * - 112 + - pcHDTV HD-2000 TV + - 7063:2000 + + * - 113 + - Twinhan DST + clones + - 11bd:0026, 1822:0001, 270f:fc00, 1822:0026 + + * - 114 + - Winfast VC100 + - 107d:6607 + + * - 115 + - Teppro TEV-560/InterVision IV-560 + - + + * - 116 + - SIMUS GVC1100 + - aa6a:82b2 + + * - 117 + - NGS NGSTV+ + - + + * - 118 + - LMLBT4 + - + + * - 119 + - Tekram M205 PRO + - + + * - 120 + - Conceptronic CONTVFMi + - + + * - 121 + - Euresys Picolo Tetra + - 1805:0105, 1805:0106, 1805:0107, 1805:0108 + + * - 122 + - Spirit TV Tuner + - + + * - 123 + - AVerMedia AVerTV DVB-T 771 + - 1461:0771 + + * - 124 + - AverMedia AverTV DVB-T 761 + - 1461:0761 + + * - 125 + - MATRIX Vision Sigma-SQ + - + + * - 126 + - MATRIX Vision Sigma-SLC + - + + * - 127 + - APAC Viewcomp 878(AMAX) + - + + * - 128 + - DViCO FusionHDTV DVB-T Lite + - 18ac:db10, 18ac:db11 + + * - 129 + - V-Gear MyVCD + - + + * - 130 + - Super TV Tuner + - + + * - 131 + - Tibet Systems 'Progress DVR' CS16 + - + + * - 132 + - Kodicom 4400R (master) + - + + * - 133 + - Kodicom 4400R (slave) + - + + * - 134 + - Adlink RTV24 + - + + * - 135 + - DViCO FusionHDTV 5 Lite + - 18ac:d500 + + * - 136 + - Acorp Y878F + - 9511:1540 + + * - 137 + - Conceptronic CTVFMi v2 + - 036e:109e + + * - 138 + - Prolink Pixelview PV-BT878P+ (Rev.2E) + - + + * - 139 + - Prolink PixelView PlayTV MPEG2 PV-M4900 + - + + * - 140 + - Osprey 440 + - 0070:ff07 + + * - 141 + - Asound Skyeye PCTV + - + + * - 142 + - Sabrent TV-FM (bttv version) + - + + * - 143 + - Hauppauge ImpactVCB (bt878) + - 0070:13eb + + * - 144 + - MagicTV + - + + * - 145 + - SSAI Security Video Interface + - 4149:5353 + + * - 146 + - SSAI Ultrasound Video Interface + - 414a:5353 + + * - 147 + - VoodooTV 200 (USA) + - 121a:3000 + + * - 148 + - DViCO FusionHDTV 2 + - dbc0:d200 + + * - 149 + - Typhoon TV-Tuner PCI (50684) + - + + * - 150 + - Geovision GV-600 + - 008a:763c + + * - 151 + - Kozumi KTV-01C + - + + * - 152 + - Encore ENL TV-FM-2 + - 1000:1801 + + * - 153 + - PHYTEC VD-012 (bt878) + - + + * - 154 + - PHYTEC VD-012-X1 (bt878) + - + + * - 155 + - PHYTEC VD-012-X2 (bt878) + - + + * - 156 + - IVCE-8784 + - 0000:f050, 0001:f050, 0002:f050, 0003:f050 + + * - 157 + - Geovision GV-800(S) (master) + - 800a:763d + + * - 158 + - Geovision GV-800(S) (slave) + - 800b:763d, 800c:763d, 800d:763d + + * - 159 + - ProVideo PV183 + - 1830:1540, 1831:1540, 1832:1540, 1833:1540, 1834:1540, 1835:1540, 1836:1540, 1837:1540 + + * - 160 + - Tongwei Video Technology TD-3116 + - f200:3116 + + * - 161 + - Aposonic W-DVR + - 0279:0228 + + * - 162 + - Adlink MPG24 + - + + * - 163 + - Bt848 Capture 14MHz + - + + * - 164 + - CyberVision CV06 (SV) + - + + * - 165 + - Kworld V-Stream Xpert TV PVR878 + - + + * - 166 + - PCI-8604PW + - diff --git a/Documentation/media/v4l-drivers/bttv.rst b/Documentation/media/v4l-drivers/bttv.rst new file mode 100644 index 000000000..5f35e2fb5 --- /dev/null +++ b/Documentation/media/v4l-drivers/bttv.rst @@ -0,0 +1,1924 @@ +The bttv driver +=============== + +Release notes for bttv +---------------------- + +You'll need at least these config options for bttv: + +.. code-block:: none + + CONFIG_I2C=m + CONFIG_I2C_ALGOBIT=m + CONFIG_VIDEO_DEV=m + +The latest bttv version is available from http://bytesex.org/bttv/ + + +Make bttv work with your card +----------------------------- + +Just try "modprobe bttv" and see if that works. + +If it doesn't bttv likely could not autodetect your card and needs some +insmod options. The most important insmod option for bttv is "card=n" +to select the correct card type. If you get video but no sound you've +very likely specified the wrong (or no) card type. A list of supported +cards is in CARDLIST.bttv + +If bttv takes very long to load (happens sometimes with the cheap +cards which have no tuner), try adding this to your modules.conf: + +.. code-block:: none + + options i2c-algo-bit bit_test=1 + +For the WinTV/PVR you need one firmware file from the driver CD: +hcwamc.rbf. The file is in the pvr45xxx.exe archive (self-extracting +zip file, unzip can unpack it). Put it into the /etc/pvr directory or +use the firm_altera=<path> insmod option to point the driver to the +location of the file. + +If your card isn't listed in CARDLIST.bttv or if you have trouble making +audio work, you should read the Sound-FAQ. + + +Autodetecting cards +------------------- + +bttv uses the PCI Subsystem ID to autodetect the card type. lspci lists +the Subsystem ID in the second line, looks like this: + +.. code-block:: none + + 00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02) + Subsystem: Hauppauge computer works Inc. WinTV/GO + Flags: bus master, medium devsel, latency 32, IRQ 5 + Memory at e2000000 (32-bit, prefetchable) [size=4K] + +only bt878-based cards can have a subsystem ID (which does not mean +that every card really has one). bt848 cards can't have a Subsystem +ID and therefore can't be autodetected. There is a list with the ID's +in bttv-cards.c (in case you are intrested or want to mail patches +with updates). + + +Still doesn't work? +------------------- + +I do NOT have a lab with 30+ different grabber boards and a +PAL/NTSC/SECAM test signal generator at home, so I often can't +reproduce your problems. This makes debugging very difficult for me. +If you have some knowledge and spare time, please try to fix this +yourself (patches very welcome of course...) You know: The linux +slogan is "Do it yourself". + +There is a mailing list at +http://vger.kernel.org/vger-lists.html#linux-media + +If you have trouble with some specific TV card, try to ask there +instead of mailing me directly. The chance that someone with the +same card listens there is much higher... + +For problems with sound: There are a lot of different systems used +for TV sound all over the world. And there are also different chips +which decode the audio signal. Reports about sound problems ("stereo +does'nt work") are pretty useless unless you include some details +about your hardware and the TV sound scheme used in your country (or +at least the country you are living in). + +Modprobe options +---------------- + +Note: "modinfo <module>" prints various information about a kernel +module, among them a complete and up-to-date list of insmod options. +This list tends to be outdated because it is updated manually ... + +========================================================================== + +bttv.o + +.. code-block:: none + + the bt848/878 (grabber chip) driver + + insmod args: + card=n card type, see CARDLIST for a list. + tuner=n tuner type, see CARDLIST for a list. + radio=0/1 card supports radio + pll=0/1/2 pll settings + 0: don't use PLL + 1: 28 MHz crystal installed + 2: 35 MHz crystal installed + + triton1=0/1 for Triton1 (+others) compatibility + vsfx=0/1 yet another chipset bug compatibility bit + see README.quirks for details on these two. + + bigendian=n Set the endianness of the gfx framebuffer. + Default is native endian. + fieldnr=0/1 Count fields. Some TV descrambling software + needs this, for others it only generates + 50 useless IRQs/sec. default is 0 (off). + autoload=0/1 autoload helper modules (tuner, audio). + default is 1 (on). + bttv_verbose=0/1/2 verbose level (at insmod time, while + looking at the hardware). default is 1. + bttv_debug=0/1 debug messages (for capture). + default is 0 (off). + irq_debug=0/1 irq handler debug messages. + default is 0 (off). + gbuffers=2-32 number of capture buffers for mmap'ed capture. + default is 4. + gbufsize= size of capture buffers. default and + maximum value is 0x208000 (~2MB) + no_overlay=0 Enable overlay on broken hardware. There + are some chipsets (SIS for example) which + are known to have problems with the PCI DMA + push used by bttv. bttv will disable overlay + by default on this hardware to avoid crashes. + With this insmod option you can override this. + no_overlay=1 Disable overlay. It should be used by broken + hardware that doesn't support PCI2PCI direct + transfers. + automute=0/1 Automatically mutes the sound if there is + no TV signal, on by default. You might try + to disable this if you have bad input signal + quality which leading to unwanted sound + dropouts. + chroma_agc=0/1 AGC of chroma signal, off by default. + adc_crush=0/1 Luminance ADC crush, on by default. + i2c_udelay= Allow reduce I2C speed. Default is 5 usecs + (meaning 66,67 Kbps). The default is the + maximum supported speed by kernel bitbang + algorithm. You may use lower numbers, if I2C + messages are lost (16 is known to work on + all supported cards). + + bttv_gpio=0/1 + gpiomask= + audioall= + audiomux= + See Sound-FAQ for a detailed description. + + remap, card, radio and pll accept up to four comma-separated arguments + (for multiple boards). + +tuner.o + +.. code-block:: none + + The tuner driver. You need this unless you want to use only + with a camera or external tuner ... + + insmod args: + debug=1 print some debug info to the syslog + type=n type of the tuner chip. n as follows: + see CARDLIST for a complete list. + pal=[bdgil] select PAL variant (used for some tuners + only, important for the audio carrier). + +tvaudio.o + +.. code-block:: none + + new, experimental module which is supported to provide a single + driver for all simple i2c audio control chips (tda/tea*). + + insmod args: + tda8425 = 1 enable/disable the support for the + tda9840 = 1 various chips. + tda9850 = 1 The tea6300 can't be autodetected and is + tda9855 = 1 therefore off by default, if you have + tda9873 = 1 this one on your card (STB uses these) + tda9874a = 1 you have to enable it explicitly. + tea6300 = 0 The two tda985x chips use the same i2c + tea6420 = 1 address and can't be disturgished from + pic16c54 = 1 each other, you might have to disable + the wrong one. + debug = 1 print debug messages + + insmod args for tda9874a: + tda9874a_SIF=1/2 select sound IF input pin (1 or 2) + (default is pin 1) + tda9874a_AMSEL=0/1 auto-mute select for NICAM (default=0) + Please read note 3 below! + tda9874a_STD=n select TV sound standard (0..8): + 0 - A2, B/G + 1 - A2, M (Korea) + 2 - A2, D/K (1) + 3 - A2, D/K (2) + 4 - A2, D/K (3) + 5 - NICAM, I + 6 - NICAM, B/G + 7 - NICAM, D/K (default) + 8 - NICAM, L + + Note 1: tda9874a supports both tda9874h (old) and tda9874a (new) chips. + Note 2: tda9874h/a and tda9875 (which is supported separately by + tda9875.o) use the same i2c address so both modules should not be + used at the same time. + Note 3: Using tda9874a_AMSEL option depends on your TV card design! + AMSEL=0: auto-mute will switch between NICAM sound + and the sound on 1st carrier (i.e. FM mono or AM). + AMSEL=1: auto-mute will switch between NICAM sound + and the analog mono input (MONOIN pin). + If tda9874a decoder on your card has MONOIN pin not connected, then + use only tda9874_AMSEL=0 or don't specify this option at all. + For example: + card=65 (FlyVideo 2000S) - set AMSEL=1 or AMSEL=0 + card=72 (Prolink PV-BT878P rev.9B) - set AMSEL=0 only + +msp3400.o + +.. code-block:: none + + The driver for the msp34xx sound processor chips. If you have a + stereo card, you probably want to insmod this one. + + insmod args: + debug=1/2 print some debug info to the syslog, + 2 is more verbose. + simple=1 Use the "short programming" method. Newer + msp34xx versions support this. You need this + for dbx stereo. Default is on if supported by + the chip. + once=1 Don't check the TV-stations Audio mode + every few seconds, but only once after + channel switches. + amsound=1 Audio carrier is AM/NICAM at 6.5 Mhz. This + should improve things for french people, the + carrier autoscan seems to work with FM only... + +tea6300.o - OBSOLETE (use tvaudio instead) + +.. code-block:: none + + The driver for the tea6300 fader chip. If you have a stereo + card and the msp3400.o doesn't work, you might want to try this + one. This chip is seen on most STB TV/FM cards (usually from + Gateway OEM sold surplus on auction sites). + + insmod args: + debug=1 print some debug info to the syslog. + +tda8425.o - OBSOLETE (use tvaudio instead) + +.. code-block:: none + + The driver for the tda8425 fader chip. This driver used to be + part of bttv.c, so if your sound used to work but does not + anymore, try loading this module. + + insmod args: + debug=1 print some debug info to the syslog. + +tda985x.o - OBSOLETE (use tvaudio instead) + +.. code-block:: none + + The driver for the tda9850/55 audio chips. + + insmod args: + debug=1 print some debug info to the syslog. + chip=9850/9855 set the chip type. + + +If the box freezes hard with bttv +--------------------------------- + +It might be a bttv driver bug. It also might be bad hardware. It also +might be something else ... + +Just mailing me "bttv freezes" isn't going to help much. This README +has a few hints how you can help to pin down the problem. + + +bttv bugs +~~~~~~~~~ + +If some version works and another doesn't it is likely to be a driver +bug. It is very helpful if you can tell where exactly it broke +(i.e. the last working and the first broken version). + +With a hard freeze you probably doesn't find anything in the logfiles. +The only way to capture any kernel messages is to hook up a serial +console and let some terminal application log the messages. /me uses +screen. See Documentation/admin-guide/serial-console.rst for details on setting +up a serial console. + +Read Documentation/admin-guide/bug-hunting.rst to learn how to get any useful +information out of a register+stack dump printed by the kernel on +protection faults (so-called "kernel oops"). + +If you run into some kind of deadlock, you can try to dump a call trace +for each process using sysrq-t (see Documentation/admin-guide/sysrq.rst). +This way it is possible to figure where *exactly* some process in "D" +state is stuck. + +I've seen reports that bttv 0.7.x crashes whereas 0.8.x works rock solid +for some people. Thus probably a small buglet left somewhere in bttv +0.7.x. I have no idea where exactly, it works stable for me and a lot of +other people. But in case you have problems with the 0.7.x versions you +can give 0.8.x a try ... + + +hardware bugs +~~~~~~~~~~~~~ + +Some hardware can't deal with PCI-PCI transfers (i.e. grabber => vga). +Sometimes problems show up with bttv just because of the high load on +the PCI bus. The bt848/878 chips have a few workarounds for known +incompatibilities, see README.quirks. + +Some folks report that increasing the pci latency helps too, +althrought I'm not sure whenever this really fixes the problems or +only makes it less likely to happen. Both bttv and btaudio have a +insmod option to set the PCI latency of the device. + +Some mainboard have problems to deal correctly with multiple devices +doing DMA at the same time. bttv + ide seems to cause this sometimes, +if this is the case you likely see freezes only with video and hard disk +access at the same time. Updating the IDE driver to get the latest and +greatest workarounds for hardware bugs might fix these problems. + + +other +~~~~~ + +If you use some binary-only yunk (like nvidia module) try to reproduce +the problem without. + +IRQ sharing is known to cause problems in some cases. It works just +fine in theory and many configurations. Neverless it might be worth a +try to shuffle around the PCI cards to give bttv another IRQ or make +it share the IRQ with some other piece of hardware. IRQ sharing with +VGA cards seems to cause trouble sometimes. I've also seen funny +effects with bttv sharing the IRQ with the ACPI bridge (and +apci-enabled kernel). + +Bttv quirks +----------- + +Below is what the bt878 data book says about the PCI bug compatibility +modes of the bt878 chip. + +The triton1 insmod option sets the EN_TBFX bit in the control register. +The vsfx insmod option does the same for EN_VSFX bit. If you have +stability problems you can try if one of these options makes your box +work solid. + +drivers/pci/quirks.c knows about these issues, this way these bits are +enabled automagically for known-buggy chipsets (look at the kernel +messages, bttv tells you). + +Normal PCI Mode +~~~~~~~~~~~~~~~ + +The PCI REQ signal is the logical-or of the incoming function requests. +The inter-nal GNT[0:1] signals are gated asynchronously with GNT and +demultiplexed by the audio request signal. Thus the arbiter defaults to +the video function at power-up and parks there during no requests for +bus access. This is desirable since the video will request the bus more +often. However, the audio will have highest bus access priority. Thus +the audio will have first access to the bus even when issuing a request +after the video request but before the PCI external arbiter has granted +access to the Bt879. Neither function can preempt the other once on the +bus. The duration to empty the entire video PCI FIFO onto the PCI bus is +very short compared to the bus access latency the audio PCI FIFO can +tolerate. + + +430FX Compatibility Mode +~~~~~~~~~~~~~~~~~~~~~~~~ + +When using the 430FX PCI, the following rules will ensure +compatibility: + + (1) Deassert REQ at the same time as asserting FRAME. + (2) Do not reassert REQ to request another bus transaction until after + finish-ing the previous transaction. + +Since the individual bus masters do not have direct control of REQ, a +simple logical-or of video and audio requests would violate the rules. +Thus, both the arbiter and the initiator contain 430FX compatibility +mode logic. To enable 430FX mode, set the EN_TBFX bit as indicated in +Device Control Register on page 104. + +When EN_TBFX is enabled, the arbiter ensures that the two compatibility +rules are satisfied. Before GNT is asserted by the PCI arbiter, this +internal arbiter may still logical-or the two requests. However, once +the GNT is issued, this arbiter must lock in its decision and now route +only the granted request to the REQ pin. The arbiter decision lock +happens regardless of the state of FRAME because it does not know when +FRAME will be asserted (typically - each initiator will assert FRAME on +the cycle following GNT). When FRAME is asserted, it is the initiator s +responsibility to remove its request at the same time. It is the +arbiters responsibility to allow this request to flow through to REQ and +not allow the other request to hold REQ asserted. The decision lock may +be removed at the end of the transaction: for example, when the bus is +idle (FRAME and IRDY). The arbiter decision may then continue +asynchronously until GNT is again asserted. + + +Interfacing with Non-PCI 2.1 Compliant Core Logic +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A small percentage of core logic devices may start a bus transaction +during the same cycle that GNT is de-asserted. This is non PCI 2.1 +compliant. To ensure compatibility when using PCs with these PCI +controllers, the EN_VSFX bit must be enabled (refer to Device Control +Register on page 104). When in this mode, the arbiter does not pass GNT +to the internal functions unless REQ is asserted. This prevents a bus +transaction from starting the same cycle as GNT is de-asserted. This +also has the side effect of not being able to take advantage of bus +parking, thus lowering arbitration performance. The Bt879 drivers must +query for these non-compliant devices, and set the EN_VSFX bit only if +required. + +bttv and sound mini howto +------------------------- + +There are a lot of different bt848/849/878/879 based boards available. +Making video work often is not a big deal, because this is handled +completely by the bt8xx chip, which is common on all boards. But +sound is handled in slightly different ways on each board. + +To handle the grabber boards correctly, there is a array tvcards[] in +bttv-cards.c, which holds the information required for each board. +Sound will work only, if the correct entry is used (for video it often +makes no difference). The bttv driver prints a line to the kernel +log, telling which card type is used. Like this one: + +.. code-block:: none + + bttv0: model: BT848(Hauppauge old) [autodetected] + +You should verify this is correct. If it isn't, you have to pass the +correct board type as insmod argument, "insmod bttv card=2" for +example. The file CARDLIST has a list of valid arguments for card. +If your card isn't listed there, you might check the source code for +new entries which are not listed yet. If there isn't one for your +card, you can check if one of the existing entries does work for you +(just trial and error...). + +Some boards have an extra processor for sound to do stereo decoding +and other nice features. The msp34xx chips are used by Hauppauge for +example. If your board has one, you might have to load a helper +module like msp3400.o to make sound work. If there isn't one for the +chip used on your board: Bad luck. Start writing a new one. Well, +you might want to check the video4linux mailing list archive first... + +Of course you need a correctly installed soundcard unless you have the +speakers connected directly to the grabber board. Hint: check the +mixer settings too. ALSA for example has everything muted by default. + + +How sound works in detail +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Still doesn't work? Looks like some driver hacking is required. +Below is a do-it-yourself description for you. + +The bt8xx chips have 32 general purpose pins, and registers to control +these pins. One register is the output enable register +(BT848_GPIO_OUT_EN), it says which pins are actively driven by the +bt848 chip. Another one is the data register (BT848_GPIO_DATA), where +you can get/set the status if these pins. They can be used for input +and output. + +Most grabber board vendors use these pins to control an external chip +which does the sound routing. But every board is a little different. +These pins are also used by some companies to drive remote control +receiver chips. Some boards use the i2c bus instead of the gpio pins +to connect the mux chip. + +As mentioned above, there is a array which holds the required +information for each known board. You basically have to create a new +line for your board. The important fields are these two: + +.. code-block:: c + + struct tvcard + { + [ ... ] + u32 gpiomask; + u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */ + }; + +gpiomask specifies which pins are used to control the audio mux chip. +The corresponding bits in the output enable register +(BT848_GPIO_OUT_EN) will be set as these pins must be driven by the +bt848 chip. + +The audiomux\[\] array holds the data values for the different inputs +(i.e. which pins must be high/low for tuner/mute/...). This will be +written to the data register (BT848_GPIO_DATA) to switch the audio +mux. + + +What you have to do is figure out the correct values for gpiomask and +the audiomux array. If you have Windows and the drivers four your +card installed, you might to check out if you can read these registers +values used by the windows driver. A tool to do this is available +from ftp://telepresence.dmem.strath.ac.uk/pub/bt848/winutil, but it +doesn't work with bt878 boards according to some reports I received. +Another one with bt878 support is available from +http://btwincap.sourceforge.net/Files/btspy2.00.zip + +You might also dig around in the \*.ini files of the Windows applications. +You can have a look at the board to see which of the gpio pins are +connected at all and then start trial-and-error ... + + +Starting with release 0.7.41 bttv has a number of insmod options to +make the gpio debugging easier: + +.. code-block:: none + + bttv_gpio=0/1 enable/disable gpio debug messages + gpiomask=n set the gpiomask value + audiomux=i,j,... set the values of the audiomux array + audioall=a set the values of the audiomux array (one + value for all array elements, useful to check + out which effect the particular value has). + +The messages printed with bttv_gpio=1 look like this: + +.. code-block:: none + + bttv0: gpio: en=00000027, out=00000024 in=00ffffd8 [audio: off] + + en = output _en_able register (BT848_GPIO_OUT_EN) + out = _out_put bits of the data register (BT848_GPIO_DATA), + i.e. BT848_GPIO_DATA & BT848_GPIO_OUT_EN + in = _in_put bits of the data register, + i.e. BT848_GPIO_DATA & ~BT848_GPIO_OUT_EN + + + +Other elements of the tvcards array +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If you are trying to make a new card work you might find it useful to +know what the other elements in the tvcards array are good for: + +.. code-block:: none + + video_inputs - # of video inputs the card has + audio_inputs - historical cruft, not used any more. + tuner - which input is the tuner + svhs - which input is svhs (all others are labeled composite) + muxsel - video mux, input->registervalue mapping + pll - same as pll= insmod option + tuner_type - same as tuner= insmod option + *_modulename - hint whenever some card needs this or that audio + module loaded to work properly. + has_radio - whenever this TV card has a radio tuner. + no_msp34xx - "1" disables loading of msp3400.o module + no_tda9875 - "1" disables loading of tda9875.o module + needs_tvaudio - set to "1" to load tvaudio.o module + +If some config item is specified both from the tvcards array and as +insmod option, the insmod option takes precedence. + +Cards +----- + +.. note:: + + For a more updated list, please check + https://linuxtv.org/wiki/index.php/Hardware_Device_Information + +Supported cards: Bt848/Bt848a/Bt849/Bt878/Bt879 cards +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +All cards with Bt848/Bt848a/Bt849/Bt878/Bt879 and normal +Composite/S-VHS inputs are supported. Teletext and Intercast support +(PAL only) for ALL cards via VBI sample decoding in software. + +Some cards with additional multiplexing of inputs or other additional +fancy chips are only partially supported (unless specifications by the +card manufacturer are given). When a card is listed here it isn't +necessarily fully supported. + +All other cards only differ by additional components as tuners, sound +decoders, EEPROMs, teletext decoders ... + + +MATRIX Vision +~~~~~~~~~~~~~ + +MV-Delta +- Bt848A +- 4 Composite inputs, 1 S-VHS input (shared with 4th composite) +- EEPROM + +http://www.matrix-vision.de/ + +This card has no tuner but supports all 4 composite (1 shared with an +S-VHS input) of the Bt848A. +Very nice card if you only have satellite TV but several tuners connected +to the card via composite. + +Many thanks to Matrix-Vision for giving us 2 cards for free which made +Bt848a/Bt849 single crystal operation support possible!!! + + + +Miro/Pinnacle PCTV +~~~~~~~~~~~~~~~~~~ + +- Bt848 + some (all??) come with 2 crystals for PAL/SECAM and NTSC +- PAL, SECAM or NTSC TV tuner (Philips or TEMIC) +- MSP34xx sound decoder on add on board + decoder is supported but AFAIK does not yet work + (other sound MUX setting in GPIO port needed??? somebody who fixed this???) +- 1 tuner, 1 composite and 1 S-VHS input +- tuner type is autodetected + +http://www.miro.de/ +http://www.miro.com/ + + +Many thanks for the free card which made first NTSC support possible back +in 1997! + + +Hauppauge Win/TV pci +~~~~~~~~~~~~~~~~~~~~ + +There are many different versions of the Hauppauge cards with different +tuners (TV+Radio ...), teletext decoders. +Note that even cards with same model numbers have (depending on the revision) +different chips on it. + +- Bt848 (and others but always in 2 crystal operation???) + newer cards have a Bt878 + +- PAL, SECAM, NTSC or tuner with or without Radio support + +e.g.: + +- PAL: + + - TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners + - TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3 + +- NTSC: + + - TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners + - TSA5518: no datasheet available on Philips site + +- Philips SAA5246 or SAA5284 ( or no) Teletext decoder chip + with buffer RAM (e.g. Winbond W24257AS-35: 32Kx8 CMOS static RAM) + SAA5246 (I2C 0x22) is supported + +- 256 bytes EEPROM: Microchip 24LC02B or Philips 8582E2Y + with configuration information + I2C address 0xa0 (24LC02B also responds to 0xa2-0xaf) + +- 1 tuner, 1 composite and (depending on model) 1 S-VHS input + +- 14052B: mux for selection of sound source + +- sound decoder: TDA9800, MSP34xx (stereo cards) + + +Askey CPH-Series +~~~~~~~~~~~~~~~~ +Developed by TelSignal(?), OEMed by many vendors (Typhoon, Anubis, Dynalink) + +- Card series: + - CPH01x: BT848 capture only + - CPH03x: BT848 + - CPH05x: BT878 with FM + - CPH06x: BT878 (w/o FM) + - CPH07x: BT878 capture only + +- TV standards: + - CPH0x0: NTSC-M/M + - CPH0x1: PAL-B/G + - CPH0x2: PAL-I/I + - CPH0x3: PAL-D/K + - CPH0x4: SECAM-L/L + - CPH0x5: SECAM-B/G + - CPH0x6: SECAM-D/K + - CPH0x7: PAL-N/N + - CPH0x8: PAL-B/H + - CPH0x9: PAL-M/M + +- CPH03x was often sold as "TV capturer". + +Identifying: + + #) 878 cards can be identified by PCI Subsystem-ID: + - 144f:3000 = CPH06x + - 144F:3002 = CPH05x w/ FM + - 144F:3005 = CPH06x_LC (w/o remote control) + #) The cards have a sticker with "CPH"-model on the back. + #) These cards have a number printed on the PCB just above the tuner metal box: + - "80-CP2000300-x" = CPH03X + - "80-CP2000500-x" = CPH05X + - "80-CP2000600-x" = CPH06X / CPH06x_LC + + Askey sells these cards as "Magic TView series", Brand "MagicXpress". + Other OEM often call these "Tview", "TView99" or else. + +Lifeview Flyvideo Series: +~~~~~~~~~~~~~~~~~~~~~~~~~ + +The naming of these series differs in time and space. + +Identifying: + #) Some models can be identified by PCI subsystem ID: + + - 1852:1852 = Flyvideo 98 FM + - 1851:1850 = Flyvideo 98 + - 1851:1851 = Flyvideo 98 EZ (capture only) + + #) There is a print on the PCB: + + - LR25 = Flyvideo (Zoran ZR36120, SAA7110A) + - LR26 Rev.N = Flyvideo II (Bt848) + - LR26 Rev.O = Flyvideo II (Bt878) + - LR37 Rev.C = Flyvideo EZ (Capture only, ZR36120 + SAA7110) + - LR38 Rev.A1= Flyvideo II EZ (Bt848 capture only) + - LR50 Rev.Q = Flyvideo 98 (w/eeprom and PCI subsystem ID) + - LR50 Rev.W = Flyvideo 98 (no eeprom) + - LR51 Rev.E = Flyvideo 98 EZ (capture only) + - LR90 = Flyvideo 2000 (Bt878) + - LR90 Flyvideo 2000S (Bt878) w/Stereo TV (Package incl. LR91 daughterboard) + - LR91 = Stereo daughter card for LR90 + - LR97 = Flyvideo DVBS + - LR99 Rev.E = Low profile card for OEM integration (only internal audio!) bt878 + - LR136 = Flyvideo 2100/3100 (Low profile, SAA7130/SAA7134) + - LR137 = Flyvideo DV2000/DV3000 (SAA7130/SAA7134 + IEEE1394) + - LR138 Rev.C= Flyvideo 2000 (SAA7130) + - LR138 Flyvideo 3000 (SAA7134) w/Stereo TV + + - These exist in variations w/FM and w/Remote sometimes denoted + by suffixes "FM" and "R". + + #) You have a laptop (miniPCI card): + + - Product = FlyTV Platinum Mini + - Model/Chip = LR212/saa7135 + + - Lifeview.com.tw states (Feb. 2002): + "The FlyVideo2000 and FlyVideo2000s product name have renamed to FlyVideo98." + Their Bt8x8 cards are listed as discontinued. + - Flyvideo 2000S was probably sold as Flyvideo 3000 in some contries(Europe?). + The new Flyvideo 2000/3000 are SAA7130/SAA7134 based. + +"Flyvideo II" had been the name for the 848 cards, nowadays (in Germany) +this name is re-used for LR50 Rev.W. + +The Lifeview website mentioned Flyvideo III at some time, but such a card +has not yet been seen (perhaps it was the german name for LR90 [stereo]). +These cards are sold by many OEMs too. + +FlyVideo A2 (Elta 8680)= LR90 Rev.F (w/Remote, w/o FM, stereo TV by tda9821) {Germany} + +Lifeview 3000 (Elta 8681) as sold by Plus(April 2002), Germany = LR138 w/ saa7134 + +lifeview config coding on gpio pins 0-9 +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +- LR50 rev. Q ("PARTS: 7031505116), Tuner wurde als Nr. 5 erkannt, Eingänge + SVideo, TV, Composite, Audio, Remote: + + - CP9..1=100001001 (1: 0-Ohm-Widerstand gegen GND unbestückt; 0: bestückt) + + +Typhoon TV card series: +~~~~~~~~~~~~~~~~~~~~~~~ + +These can be CPH, Flyvideo, Pixelview or KNC1 series. +Typhoon is the brand of Anubis. +Model 50680 got re-used, some model no. had different contents over time. + +Models: + + - 50680 "TV Tuner PCI Pal BG"(old,red package)=can be CPH03x(bt848) or CPH06x(bt878) + - 50680 "TV Tuner Pal BG" (blue package)= Pixelview PV-BT878P+ (Rev 9B) + - 50681 "TV Tuner PCI Pal I" (variant of 50680) + - 50682 "TView TV/FM Tuner Pal BG" = Flyvideo 98FM (LR50 Rev.Q) + + .. note:: + + The package has a picture of CPH05x (which would be a real TView) + + - 50683 "TV Tuner PCI SECAM" (variant of 50680) + - 50684 "TV Tuner Pal BG" = Pixelview 878TV(Rev.3D) + - 50686 "TV Tuner" = KNC1 TV Station + - 50687 "TV Tuner stereo" = KNC1 TV Station pro + - 50688 "TV Tuner RDS" (black package) = KNC1 TV Station RDS + - 50689 TV SAT DVB-S CARD CI PCI (SAA7146AH, SU1278?) = "KNC1 TV Station DVB-S" + - 50692 "TV/FM Tuner" (small PCB) + - 50694 TV TUNER CARD RDS (PHILIPS CHIPSET SAA7134HL) + - 50696 TV TUNER STEREO (PHILIPS CHIPSET SAA7134HL, MK3ME Tuner) + - 50804 PC-SAT TV/Audio Karte = Techni-PC-Sat (ZORAN 36120PQC, Tuner:Alps) + - 50866 TVIEW SAT RECEIVER+ADR + - 50868 "TV/FM Tuner Pal I" (variant of 50682) + - 50999 "TV/FM Tuner Secam" (variant of 50682) + +Guillemot +~~~~~~~~~ + +Models: + +- Maxi-TV PCI (ZR36120) +- Maxi TV Video 2 = LR50 Rev.Q (FI1216MF, PAL BG+SECAM) +- Maxi TV Video 3 = CPH064 (PAL BG + SECAM) + +Mentor +~~~~~~ + +Mentor TV card ("55-878TV-U1") = Pixelview 878TV(Rev.3F) (w/FM w/Remote) + +Prolink +~~~~~~~ + +- TV cards: + + - PixelView Play TV pro - (Model: PV-BT878P+ REV 8E) + - PixelView Play TV pro - (Model: PV-BT878P+ REV 9D) + - PixelView Play TV pro - (Model: PV-BT878P+ REV 4C / 8D / 10A ) + - PixelView Play TV - (Model: PV-BT848P+) + - 878TV - (Model: PV-BT878TV) + +- Multimedia TV packages (card + software pack): + + - PixelView Play TV Theater - (Model: PV-M4200) = PixelView Play TV pro + Software + - PixelView Play TV PAK - (Model: PV-BT878P+ REV 4E) + - PixelView Play TV/VCR - (Model: PV-M3200 REV 4C / 8D / 10A ) + - PixelView Studio PAK - (Model: M2200 REV 4C / 8D / 10A ) + - PixelView PowerStudio PAK - (Model: PV-M3600 REV 4E) + - PixelView DigitalVCR PAK - (Model: PV-M2400 REV 4C / 8D / 10A ) + - PixelView PlayTV PAK II (TV/FM card + usb camera) PV-M3800 + - PixelView PlayTV XP PV-M4700,PV-M4700(w/FM) + - PixelView PlayTV DVR PV-M4600 package contents:PixelView PlayTV pro, windvr & videoMail s/w + +- Further Cards: + + - PV-BT878P+rev.9B (Play TV Pro, opt. w/FM w/NICAM) + - PV-BT878P+rev.2F + - PV-BT878P Rev.1D (bt878, capture only) + + - XCapture PV-CX881P (cx23881) + - PlayTV HD PV-CX881PL+, PV-CX881PL+(w/FM) (cx23881) + + - DTV3000 PV-DTV3000P+ DVB-S CI = Twinhan VP-1030 + - DTV2000 DVB-S = Twinhan VP-1020 + +- Video Conferencing: + + - PixelView Meeting PAK - (Model: PV-BT878P) + - PixelView Meeting PAK Lite - (Model: PV-BT878P) + - PixelView Meeting PAK plus - (Model: PV-BT878P+rev 4C/8D/10A) + - PixelView Capture - (Model: PV-BT848P) + - PixelView PlayTV USB pro + - Model No. PV-NT1004+, PV-NT1004+ (w/FM) = NT1004 USB decoder chip + SAA7113 video decoder chip + +Dynalink +~~~~~~~~ + +These are CPH series. + +Phoebemicro +~~~~~~~~~~~ + +- TV Master = CPH030 or CPH060 +- TV Master FM = CPH050 + +Genius/Kye +~~~~~~~~~~ + +- Video Wonder/Genius Internet Video Kit = LR37 Rev.C +- Video Wonder Pro II (848 or 878) = LR26 + +Tekram +~~~~~~ + +- VideoCap C205 (Bt848) +- VideoCap C210 (zr36120 +Philips) +- CaptureTV M200 (ISA) +- CaptureTV M205 (Bt848) + +Lucky Star +~~~~~~~~~~ + +- Image World Conference TV = LR50 Rev. Q + +Leadtek +~~~~~~~ + +- WinView 601 (Bt848) +- WinView 610 (Zoran) +- WinFast2000 +- WinFast2000 XP + +Support for the Leadtek WinView 601 TV/FM +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Author of this section: Jon Tombs <jon@gte.esi.us.es> + +This card is basically the same as all the rest (Bt484A, Philips tuner), +the main difference is that they have attached a programmable attenuator to 3 +GPIO lines in order to give some volume control. They have also stuck an +infra-red remote control decoded on the board, I will add support for this +when I get time (it simple generates an interrupt for each key press, with +the key code is placed in the GPIO port). + +I don't yet have any application to test the radio support. The tuner +frequency setting should work but it is possible that the audio multiplexer +is wrong. If it doesn't work, send me email. + + +- No Thanks to Leadtek they refused to answer any questions about their + hardware. The driver was written by visual inspection of the card. If you + use this driver, send an email insult to them, and tell them you won't + continue buying their hardware unless they support Linux. + +- Little thanks to Princeton Technology Corp (http://www.princeton.com.tw) + who make the audio attenuator. Their publicly available data-sheet available + on their web site doesn't include the chip programming information! Hidden + on their server are the full data-sheets, but don't ask how I found it. + +To use the driver I use the following options, the tuner and pll settings might +be different in your country + +insmod videodev +insmod i2c scan=1 i2c_debug=0 verbose=0 +insmod tuner type=1 debug=0 +insmod bttv pll=1 radio=1 card=17 + + +KNC One +~~~~~~~ + +- TV-Station +- TV-Station SE (+Software Bundle) +- TV-Station pro (+TV stereo) +- TV-Station FM (+Radio) +- TV-Station RDS (+RDS) +- TV Station SAT (analog satellite) +- TV-Station DVB-S + +.. note:: newer Cards have saa7134, but model name stayed the same? + +Provideo +~~~~~~~~ + +- PV951 or PV-951 (also are sold as: + Boeder TV-FM Video Capture Card, + Titanmedia Supervision TV-2400, + Provideo PV951 TF, + 3DeMon PV951, + MediaForte TV-Vision PV951, + Yoko PV951, + Vivanco Tuner Card PCI Art.-Nr.: 68404, + ) now named PV-951T + +- Surveillance Series: + + - PV-141 + - PV-143 + - PV-147 + - PV-148 (capture only) + - PV-150 + - PV-151 + +- TV-FM Tuner Series: + + - PV-951TDV (tv tuner + 1394) + - PV-951T/TF + - PV-951PT/TF + - PV-956T/TF Low Profile + - PV-911 + +Highscreen +~~~~~~~~~~ + +Models: + +- TV Karte = LR50 Rev.S +- TV-Boostar = Terratec Terra TV+ Version 1.0 (Bt848, tda9821) "ceb105.pcb" + +Zoltrix +~~~~~~~ + +Models: + +- Face to Face Capture (Bt848 capture only) (PCB "VP-2848") +- Face To Face TV MAX (Bt848) (PCB "VP-8482 Rev1.3") +- Genie TV (Bt878) (PCB "VP-8790 Rev 2.1") +- Genie Wonder Pro + +AVerMedia +~~~~~~~~~ + +- AVer FunTV Lite (ISA, AV3001 chipset) "M101.C" +- AVerTV +- AVerTV Stereo +- AVerTV Studio (w/FM) +- AVerMedia TV98 with Remote +- AVerMedia TV/FM98 Stereo +- AVerMedia TVCAM98 +- TVCapture (Bt848) +- TVPhone (Bt848) +- TVCapture98 (="AVerMedia TV98" in USA) (Bt878) +- TVPhone98 (Bt878, w/FM) + +======== =========== =============== ======= ====== ======== ======================= +PCB PCI-ID Model-Name Eeprom Tuner Sound Country +======== =========== =============== ======= ====== ======== ======================= +M101.C ISA ! +M108-B Bt848 -- FR1236 US [#f2]_, [#f3]_ +M1A8-A Bt848 AVer TV-Phone FM1216 -- +M168-T 1461:0003 AVerTV Studio 48:17 FM1216 TDA9840T D [#f1]_ w/FM w/Remote +M168-U 1461:0004 TVCapture98 40:11 FI1216 -- D w/Remote +M168II-B 1461:0003 Medion MD9592 48:16 FM1216 TDA9873H D w/FM +======== =========== =============== ======= ====== ======== ======================= + +.. [#f1] Daughterboard MB68-A with TDA9820T and TDA9840T +.. [#f2] Sony NE41S soldered (stereo sound?) +.. [#f3] Daughterboard M118-A w/ pic 16c54 and 4 MHz quartz + +- US site has different drivers for (as of 09/2002): + + - EZ Capture/InterCam PCI (BT-848 chip) + - EZ Capture/InterCam PCI (BT-878 chip) + - TV-Phone (BT-848 chip) + - TV98 (BT-848 chip) + - TV98 With Remote (BT-848 chip) + - TV98 (BT-878 chip) + - TV98 With Remote (BT-878) + - TV/FM98 (BT-878 chip) + - AVerTV + - AverTV Stereo + - AVerTV Studio + +DE hat diverse Treiber fuer diese Modelle (Stand 09/2002): + + - TVPhone (848) mit Philips tuner FR12X6 (w/ FM radio) + - TVPhone (848) mit Philips tuner FM12X6 (w/ FM radio) + - TVCapture (848) w/Philips tuner FI12X6 + - TVCapture (848) non-Philips tuner + - TVCapture98 (Bt878) + - TVPhone98 (Bt878) + - AVerTV und TVCapture98 w/VCR (Bt 878) + - AVerTVStudio und TVPhone98 w/VCR (Bt878) + - AVerTV GO Serie (Kein SVideo Input) + - AVerTV98 (BT-878 chip) + - AVerTV98 mit Fernbedienung (BT-878 chip) + - AVerTV/FM98 (BT-878 chip) + + - VDOmate (www.averm.com.cn) = M168U ? + +Aimslab +~~~~~~~ + +Models: + +- Video Highway or "Video Highway TR200" (ISA) +- Video Highway Xtreme (aka "VHX") (Bt848, FM w/ TEA5757) + +IXMicro (former: IMS=Integrated Micro Solutions) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Models: + +- IXTV BT848 (=TurboTV) +- IXTV BT878 +- IMS TurboTV (Bt848) + +Lifetec/Medion/Tevion/Aldi +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Models: + +- LT9306/MD9306 = CPH061 +- LT9415/MD9415 = LR90 Rev.F or Rev.G +- MD9592 = Avermedia TVphone98 (PCI_ID=1461:0003), PCB-Rev=M168II-B (w/TDA9873H) +- MD9717 = KNC One (Rev D4, saa7134, FM1216 MK2 tuner) +- MD5044 = KNC One (Rev D4, saa7134, FM1216ME MK3 tuner) + +Modular Technologies (www.modulartech.com) UK +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Models: + +- MM100 PCTV (Bt848) +- MM201 PCTV (Bt878, Bt832) w/ Quartzsight camera +- MM202 PCTV (Bt878, Bt832, tda9874) +- MM205 PCTV (Bt878) +- MM210 PCTV (Bt878) (Galaxy TV, Galaxymedia ?) + +Terratec +~~~~~~~~ + +Models: + +- Terra TV+ Version 1.0 (Bt848), "ceb105.PCB" printed on the PCB, TDA9821 +- Terra TV+ Version 1.1 (Bt878), "LR74 Rev.E" printed on the PCB, TDA9821 +- Terra TValueRadio, "LR102 Rev.C" printed on the PCB +- Terra TV/Radio+ Version 1.0, "80-CP2830100-0" TTTV3 printed on the PCB, + "CPH010-E83" on the back, SAA6588T, TDA9873H +- Terra TValue Version BT878, "80-CP2830110-0 TTTV4" printed on the PCB, + "CPH011-D83" on back +- Terra TValue Version 1.0 "ceb105.PCB" (really identical to Terra TV+ Version 1.0) +- Terra TValue New Revision "LR102 Rec.C" +- Terra Active Radio Upgrade (tea5757h, saa6588t) + +- LR74 is a newer PCB revision of ceb105 (both incl. connector for Active Radio Upgrade) + +- Cinergy 400 (saa7134), "E877 11(S)", "PM820092D" printed on PCB +- Cinergy 600 (saa7134) + +Technisat +~~~~~~~~~ + +Models: + +- Discos ADR PC-Karte ISA (no TV!) +- Discos ADR PC-Karte PCI (probably no TV?) +- Techni-PC-Sat (Sat. analog) + Rev 1.2 (zr36120, vpx3220, stv0030, saa5246, BSJE3-494A) +- Mediafocus I (zr36120/zr36125, drp3510, Sat. analog + ADR Radio) +- Mediafocus II (saa7146, Sat. analog) +- SatADR Rev 2.1 (saa7146a, saa7113h, stv0056a, msp3400c, drp3510a, BSKE3-307A) +- SkyStar 1 DVB (AV7110) = Technotrend Premium +- SkyStar 2 DVB (B2C2) (=Sky2PC) + +Siemens +~~~~~~~ + +Multimedia eXtension Board (MXB) (SAA7146, SAA7111) + +Powercolor +~~~~~~~~~~ + +Models: + +- MTV878 + Package comes with different contents: + + a) pcb "MTV878" (CARD=75) + b) Pixelview Rev. 4\_ + +- MTV878R w/Remote Control +- MTV878F w/Remote Control w/FM radio + +Pinnacle +~~~~~~~~ + +PCTV models: + +- Mirovideo PCTV (Bt848) +- Mirovideo PCTV SE (Bt848) +- Mirovideo PCTV Pro (Bt848 + Daughterboard for TV Stereo and FM) +- Studio PCTV Rave (Bt848 Version = Mirovideo PCTV) +- Studio PCTV Rave (Bt878 package w/o infrared) +- Studio PCTV (Bt878) +- Studio PCTV Pro (Bt878 stereo w/ FM) +- Pinnacle PCTV (Bt878, MT2032) +- Pinnacle PCTV Pro (Bt878, MT2032) +- Pinncale PCTV Sat (bt878a, HM1821/1221) ["Conexant CX24110 with CX24108 tuner, aka HM1221/HM1811"] +- Pinnacle PCTV Sat XE + +M(J)PEG capture and playback models: + +- DC1+ (ISA) +- DC10 (zr36057, zr36060, saa7110, adv7176) +- DC10+ (zr36067, zr36060, saa7110, adv7176) +- DC20 (ql16x24b,zr36050, zr36016, saa7110, saa7187 ...) +- DC30 (zr36057, zr36050, zr36016, vpx3220, adv7176, ad1843, tea6415, miro FST97A1) +- DC30+ (zr36067, zr36050, zr36016, vpx3220, adv7176) +- DC50 (zr36067, zr36050, zr36016, saa7112, adv7176 (2 pcs.?), ad1843, miro FST97A1, Lattice ???) + +Lenco +~~~~~ + +Models: + +- MXR-9565 (=Technisat Mediafocus?) +- MXR-9571 (Bt848) (=CPH031?) +- MXR-9575 +- MXR-9577 (Bt878) (=Prolink 878TV Rev.3x) +- MXTV-9578CP (Bt878) (= Prolink PV-BT878P+4E) + +Iomega +~~~~~~ + +Buz (zr36067, zr36060, saa7111, saa7185) + +LML +~~~ + LML33 (zr36067, zr36060, bt819, bt856) + +Grandtec +~~~~~~~~ + +Models: + +- Grand Video Capture (Bt848) +- Multi Capture Card (Bt878) + +Koutech +~~~~~~~ + +Models: + +- KW-606 (Bt848) +- KW-607 (Bt848 capture only) +- KW-606RSF +- KW-607A (capture only) +- KW-608 (Zoran capture only) + +IODATA (jp) +~~~~~~~~~~~ + +Models: + +- GV-BCTV/PCI +- GV-BCTV2/PCI +- GV-BCTV3/PCI +- GV-BCTV4/PCI +- GV-VCP/PCI (capture only) +- GV-VCP2/PCI (capture only) + +Canopus (jp) +~~~~~~~~~~~~ + +WinDVR = Kworld "KW-TVL878RF" + +www.sigmacom.co.kr +~~~~~~~~~~~~~~~~~~ + +Sigma Cyber TV II + +www.sasem.co.kr +~~~~~~~~~~~~~~~ + +Litte OnAir TV + +hama +~~~~ + +TV/Radio-Tuner Card, PCI (Model 44677) = CPH051 + +Sigma Designs +~~~~~~~~~~~~~ + +Hollywood plus (em8300, em9010, adv7175), (PCB "M340-10") MPEG DVD decoder + +Formac +~~~~~~ + +Models: + +- iProTV (Card for iMac Mezzanine slot, Bt848+SCSI) +- ProTV (Bt848) +- ProTV II = ProTV Stereo (Bt878) ["stereo" means FM stereo, tv is still mono] + +ATI +~~~ + +Models: + +- TV-Wonder +- TV-Wonder VE + +Diamond Multimedia +~~~~~~~~~~~~~~~~~~ + +DTV2000 (Bt848, tda9875) + +Aopen +~~~~~ + +- VA1000 Plus (w/ Stereo) +- VA1000 Lite +- VA1000 (=LR90) + +Intel +~~~~~ + +Models: + +- Smart Video Recorder (ISA full-length) +- Smart Video Recorder pro (ISA half-length) +- Smart Video Recorder III (Bt848) + +STB +~~~ + +Models: + +- STB Gateway 6000704 (bt878) +- STB Gateway 6000699 (bt848) +- STB Gateway 6000402 (bt848) +- STB TV130 PCI + +Videologic +~~~~~~~~~~ + +Models: + +- Captivator Pro/TV (ISA?) +- Captivator PCI/VC (Bt848 bundled with camera) (capture only) + +Technotrend +~~~~~~~~~~~~ + +Models: + +- TT-SAT PCI (PCB "Sat-PCI Rev.:1.3.1"; zr36125, vpx3225d, stc0056a, Tuner:BSKE6-155A +- TT-DVB-Sat + - revisions 1.1, 1.3, 1.5, 1.6 and 2.1 + - This card is sold as OEM from: + + - Siemens DVB-s Card + - Hauppauge WinTV DVB-S + - Technisat SkyStar 1 DVB + - Galaxis DVB Sat + + - Now this card is called TT-PCline Premium Family + - TT-Budget (saa7146, bsru6-701a) + This card is sold as OEM from: + + - Hauppauge WinTV Nova + - Satelco Standard PCI (DVB-S) + - TT-DVB-C PCI + +Teles +~~~~~ + + DVB-s (Rev. 2.2, BSRV2-301A, data only?) + +Remote Vision +~~~~~~~~~~~~~ + +MX RV605 (Bt848 capture only) + +Boeder +~~~~~~ + +Models: + +- PC ChatCam (Model 68252) (Bt848 capture only) +- Tv/Fm Capture Card (Model 68404) = PV951 + +Media-Surfer (esc-kathrein.de) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Models: + +- Sat-Surfer (ISA) +- Sat-Surfer PCI = Techni-PC-Sat +- Cable-Surfer 1 +- Cable-Surfer 2 +- Cable-Surfer PCI (zr36120) +- Audio-Surfer (ISA Radio card) + +Jetway (www.jetway.com.tw) +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Models: + +- JW-TV 878M +- JW-TV 878 = KWorld KW-TV878RF + +Galaxis +~~~~~~~ + +Models: + +- Galaxis DVB Card S CI +- Galaxis DVB Card C CI +- Galaxis DVB Card S +- Galaxis DVB Card C +- Galaxis plug.in S [neuer Name: Galaxis DVB Card S CI + +Hauppauge +~~~~~~~~~ + +Models: + +- many many WinTV models ... +- WinTV DVBs = Technotrend Premium 1.3 +- WinTV NOVA = Technotrend Budget 1.1 "S-DVB DATA" +- WinTV NOVA-CI "SDVBACI" +- WinTV Nova USB (=Technotrend USB 1.0) +- WinTV-Nexus-s (=Technotrend Premium 2.1 or 2.2) +- WinTV PVR +- WinTV PVR 250 +- WinTV PVR 450 + +US models + +-990 WinTV-PVR-350 (249USD) (iTVC15 chipset + radio) +-980 WinTV-PVR-250 (149USD) (iTVC15 chipset) +-880 WinTV-PVR-PCI (199USD) (KFIR chipset + bt878) +-881 WinTV-PVR-USB +-190 WinTV-GO +-191 WinTV-GO-FM +-404 WinTV +-401 WinTV-radio +-495 WinTV-Theater +-602 WinTV-USB +-621 WinTV-USB-FM +-600 USB-Live +-698 WinTV-HD +-697 WinTV-D +-564 WinTV-Nexus-S + +Deutsche Modelle: + +-603 WinTV GO +-719 WinTV Primio-FM +-718 WinTV PCI-FM +-497 WinTV Theater +-569 WinTV USB +-568 WinTV USB-FM +-882 WinTV PVR +-981 WinTV PVR 250 +-891 WinTV-PVR-USB +-541 WinTV Nova +-488 WinTV Nova-Ci +-564 WinTV-Nexus-s +-727 WinTV-DVB-c +-545 Common Interface +-898 WinTV-Nova-USB + +UK models: + +-607 WinTV Go +-693,793 WinTV Primio FM +-647,747 WinTV PCI FM +-498 WinTV Theater +-883 WinTV PVR +-893 WinTV PVR USB (Duplicate entry) +-566 WinTV USB (UK) +-573 WinTV USB FM +-429 Impact VCB (bt848) +-600 USB Live (Video-In 1x Comp, 1xSVHS) +-542 WinTV Nova +-717 WinTV DVB-S +-909 Nova-t PCI +-893 Nova-t USB (Duplicate entry) +-802 MyTV +-804 MyView +-809 MyVideo +-872 MyTV2Go FM +-546 WinTV Nova-S CI +-543 WinTV Nova +-907 Nova-S USB +-908 Nova-T USB +-717 WinTV Nexus-S +-157 DEC3000-s Standalone + USB + +Spain: + +-685 WinTV-Go +-690 WinTV-PrimioFM +-416 WinTV-PCI Nicam Estereo +-677 WinTV-PCI-FM +-699 WinTV-Theater +-683 WinTV-USB +-678 WinTV-USB-FM +-983 WinTV-PVR-250 +-883 WinTV-PVR-PCI +-993 WinTV-PVR-350 +-893 WinTV-PVR-USB +-728 WinTV-DVB-C PCI +-832 MyTV2Go +-869 MyTV2Go-FM +-805 MyVideo (USB) + + +Matrix-Vision +~~~~~~~~~~~~~ + +Models: + +- MATRIX-Vision MV-Delta +- MATRIX-Vision MV-Delta 2 +- MVsigma-SLC (Bt848) + +Conceptronic (.net) +~~~~~~~~~~~~~~~~~~~ + +Models: + +- TVCON FM, TV card w/ FM = CPH05x +- TVCON = CPH06x + +BestData +~~~~~~~~ + +Models: + +- HCC100 = VCC100rev1 + camera +- VCC100 rev1 (bt848) +- VCC100 rev2 (bt878) + +Gallant (www.gallantcom.com) www.minton.com.tw +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Models: + +- Intervision IV-510 (capture only bt8x8) +- Intervision IV-550 (bt8x8) +- Intervision IV-100 (zoran) +- Intervision IV-1000 (bt8x8) + +Asonic (www.asonic.com.cn) (website down) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +SkyEye tv 878 + +Hoontech +~~~~~~~~ + +878TV/FM + +Teppro (www.itcteppro.com.tw) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Models: + +- ITC PCITV (Card Ver 1.0) "Teppro TV1/TVFM1 Card" +- ITC PCITV (Card Ver 2.0) +- ITC PCITV (Card Ver 3.0) = "PV-BT878P+ (REV.9D)" +- ITC PCITV (Card Ver 4.0) +- TEPPRO IV-550 (For BT848 Main Chip) +- ITC DSTTV (bt878, satellite) +- ITC VideoMaker (saa7146, StreamMachine sm2110, tvtuner) "PV-SM2210P+ (REV:1C)" + +Kworld (www.kworld.com.tw) +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +PC TV Station: + +- KWORLD KW-TV878R TV (no radio) +- KWORLD KW-TV878RF TV (w/ radio) +- KWORLD KW-TVL878RF (low profile) +- KWORLD KW-TV713XRF (saa7134) + + + MPEG TV Station (same cards as above plus WinDVR Software MPEG en/decoder) + +- KWORLD KW-TV878R -Pro TV (no Radio) +- KWORLD KW-TV878RF-Pro TV (w/ Radio) +- KWORLD KW-TV878R -Ultra TV (no Radio) +- KWORLD KW-TV878RF-Ultra TV (w/ Radio) + +JTT/ Justy Corp.(http://www.jtt.ne.jp/) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +JTT-02 (JTT TV) "TV watchmate pro" (bt848) + +ADS www.adstech.com +~~~~~~~~~~~~~~~~~~~ + +Models: + +- Channel Surfer TV ( CHX-950 ) +- Channel Surfer TV+FM ( CHX-960FM ) + +AVEC www.prochips.com +~~~~~~~~~~~~~~~~~~~~~ + +AVEC Intercapture (bt848, tea6320) + +NoBrand +~~~~~~~ + +TV Excel = Australian Name for "PV-BT878P+ 8E" or "878TV Rev.3\_" + +Mach www.machspeed.com +~~~~~~~~~~~~~~~~~~~~~~ + +Mach TV 878 + +Eline www.eline-net.com/ +~~~~~~~~~~~~~~~~~~~~~~~~ + +Models: + +- Eline Vision TVMaster / TVMaster FM (ELV-TVM/ ELV-TVM-FM) = LR26 (bt878) +- Eline Vision TVMaster-2000 (ELV-TVM-2000, ELV-TVM-2000-FM)= LR138 (saa713x) + +Spirit +~~~~~~ + +- Spirit TV Tuner/Video Capture Card (bt848) + +Boser www.boser.com.tw +~~~~~~~~~~~~~~~~~~~~~~ + +Models: + +- HS-878 Mini PCI Capture Add-on Card +- HS-879 Mini PCI 3D Audio and Capture Add-on Card (w/ ES1938 Solo-1) + +Satelco www.citycom-gmbh.de, www.satelco.de +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Models: + +- TV-FM =KNC1 saa7134 +- Standard PCI (DVB-S) = Technotrend Budget +- Standard PCI (DVB-S) w/ CI +- Satelco Highend PCI (DVB-S) = Technotrend Premium + + +Sensoray www.sensoray.com +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Models: + +- Sensoray 311 (PC/104 bus) +- Sensoray 611 (PCI) + +CEI (Chartered Electronics Industries Pte Ltd [CEI] [FCC ID HBY]) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Models: + +- TV Tuner - HBY-33A-RAFFLES Brooktree Bt848KPF + Philips +- TV Tuner MG9910 - HBY33A-TVO CEI + Philips SAA7110 + OKI M548262 + ST STV8438CV +- Primetime TV (ISA) + + - acquired by Singapore Technologies + - now operating as Chartered Semiconductor Manufacturing + - Manufacturer of video cards is listed as: + + - Cogent Electronics Industries [CEI] + +AITech +~~~~~~ + +Models: + +- Wavewatcher TV (ISA) +- AITech WaveWatcher TV-PCI = can be LR26 (Bt848) or LR50 (BT878) +- WaveWatcher TVR-202 TV/FM Radio Card (ISA) + +MAXRON +~~~~~~ + +Maxron MaxTV/FM Radio (KW-TV878-FNT) = Kworld or JW-TV878-FBK + +www.ids-imaging.de +~~~~~~~~~~~~~~~~~~ + +Models: + +- Falcon Series (capture only) + +In USA: http://www.theimagingsource.com/ +- DFG/LC1 + +www.sknet-web.co.jp +~~~~~~~~~~~~~~~~~~~ + +SKnet Monster TV (saa7134) + +A-Max www.amaxhk.com (Colormax, Amax, Napa) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +APAC Viewcomp 878 + +Cybertainment +~~~~~~~~~~~~~ + +Models: + +- CyberMail AV Video Email Kit w/ PCI Capture Card (capture only) +- CyberMail Xtreme + +These are Flyvideo + +VCR (http://www.vcrinc.com/) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Video Catcher 16 + +Twinhan +~~~~~~~ + +Models: + +- DST Card/DST-IP (bt878, twinhan asic) VP-1020 + - Sold as: + + - KWorld DVBS Satellite TV-Card + - Powercolor DSTV Satellite Tuner Card + - Prolink Pixelview DTV2000 + - Provideo PV-911 Digital Satellite TV Tuner Card With Common Interface ? + +- DST-CI Card (DVB Satellite) VP-1030 +- DCT Card (DVB cable) + +MSI +~~~ + +Models: + +- MSI TV@nywhere Tuner Card (MS-8876) (CX23881/883) Not Bt878 compatible. +- MS-8401 DVB-S + +Focus www.focusinfo.com +~~~~~~~~~~~~~~~~~~~~~~~ + +InVideo PCI (bt878) + +Sdisilk www.sdisilk.com/ +~~~~~~~~~~~~~~~~~~~~~~~~ + +Models: + +- SDI Silk 100 +- SDI Silk 200 SDI Input Card + +www.euresys.com +~~~~~~~~~~~~~~~ + +PICOLO series + +PMC/Pace +~~~~~~~~ + +www.pacecom.co.uk website closed + +Mercury www.kobian.com (UK and FR) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Models: + +- LR50 +- LR138RBG-Rx == LR138 + +TEC sound +~~~~~~~~~ + +TV-Mate = Zoltrix VP-8482 + +Though educated googling found: www.techmakers.com + +(package and manuals don't have any other manufacturer info) TecSound + +Lorenzen www.lorenzen.de +~~~~~~~~~~~~~~~~~~~~~~~~ + +SL DVB-S PCI = Technotrend Budget PCI (su1278 or bsru version) + +Origo (.uk) www.origo2000.com +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +PC TV Card = LR50 + +I/O Magic www.iomagic.com +~~~~~~~~~~~~~~~~~~~~~~~~~ + +PC PVR - Desktop TV Personal Video Recorder DR-PCTV100 = Pinnacle ROB2D-51009464 4.0 + Cyberlink PowerVCR II + +Arowana +~~~~~~~ + +TV-Karte / Poso Power TV (?) = Zoltrix VP-8482 (?) + +iTVC15 boards +~~~~~~~~~~~~~ + +kuroutoshikou.com ITVC15 +yuan.com MPG160 PCI TV (Internal PCI MPEG2 encoder card plus TV-tuner) + +Asus www.asuscom.com +~~~~~~~~~~~~~~~~~~~~ + +Models: + +- Asus TV Tuner Card 880 NTSC (low profile, cx23880) +- Asus TV (saa7134) + +Hoontech +~~~~~~~~ + +http://www.hoontech.de/ + +- HART Vision 848 (H-ART Vision 848) +- HART Vision 878 (H-Art Vision 878) + + + +Chips used at bttv devices +-------------------------- + +- all boards: + + - Brooktree Bt848/848A/849/878/879: video capture chip + +- Board specific + + - Miro PCTV: + + - Philips or Temic Tuner + + - Hauppauge Win/TV pci (version 405): + + - Microchip 24LC02B or Philips 8582E2Y: + + - 256 Byte EEPROM with configuration information + - I2C 0xa0-0xa1, (24LC02B also responds to 0xa2-0xaf) + + - Philips SAA5246AGP/E: Videotext decoder chip, I2C 0x22-0x23 + + - TDA9800: sound decoder + + - Winbond W24257AS-35: 32Kx8 CMOS static RAM (Videotext buffer mem) + + - 14052B: analog switch for selection of sound source + +- PAL: + + - TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners + - TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3 + +- NTSC: + + - TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners + - TSA5518: no datasheet available on Philips site + +- STB TV pci: + + - ??? + - if you want better support for STB cards send me info! + Look at the board! What chips are on it? + + + + +Specs +----- + +Philips http://www.Semiconductors.COM/pip/ + +Conexant http://www.conexant.com/ + +Micronas http://www.micronas.com/en/home/index.html + +Thanks +------ + +Many thanks to: + +- Markus Schroeder <schroedm@uni-duesseldorf.de> for information on the Bt848 + and tuner programming and his control program xtvc. + +- Martin Buck <martin-2.buck@student.uni-ulm.de> for his great Videotext + package. + +- Gerd Hoffmann for the MSP3400 support and the modular + I2C, tuner, ... support. + + +- MATRIX Vision for giving us 2 cards for free, which made support of + single crystal operation possible. + +- MIRO for providing a free PCTV card and detailed information about the + components on their cards. (E.g. how the tuner type is detected) + Without their card I could not have debugged the NTSC mode. + +- Hauppauge for telling how the sound input is selected and what components + they do and will use on their radio cards. + Also many thanks for faxing me the FM1216 data sheet. + +Contributors +------------ + +Michael Chu <mmchu@pobox.com> + AverMedia fix and more flexible card recognition + +Alan Cox <alan@lxorguk.ukuu.org.uk> + Video4Linux interface and 2.1.x kernel adaptation + +Chris Kleitsch + Hardware I2C + +Gerd Hoffmann + Radio card (ITT sound processor) + +bigfoot <bigfoot@net-way.net> + +Ragnar Hojland Espinosa <ragnar@macula.net> + ConferenceTV card + + ++ many more (please mail me if you are missing in this list and would + like to be mentioned) diff --git a/Documentation/media/v4l-drivers/cafe_ccic.rst b/Documentation/media/v4l-drivers/cafe_ccic.rst new file mode 100644 index 000000000..94f0f58eb --- /dev/null +++ b/Documentation/media/v4l-drivers/cafe_ccic.rst @@ -0,0 +1,60 @@ +The cafe_ccic driver +==================== + +Author: Jonathan Corbet <corbet@lwn.net> + +Introduction +------------ + +"cafe_ccic" is a driver for the Marvell 88ALP01 "cafe" CMOS camera +controller. This is the controller found in first-generation OLPC systems, +and this driver was written with support from the OLPC project. + +Current status: the core driver works. It can generate data in YUV422, +RGB565, and RGB444 formats. (Anybody looking at the code will see RGB32 as +well, but that is a debugging aid which will be removed shortly). VGA and +QVGA modes work; CIF is there but the colors remain funky. Only the OV7670 +sensor is known to work with this controller at this time. + +To try it out: either of these commands will work: + +.. code-block:: none + + $ mplayer tv:// -tv driver=v4l2:width=640:height=480 -nosound + $ mplayer tv:// -tv driver=v4l2:width=640:height=480:outfmt=bgr16 -nosound + +The "xawtv" utility also works; gqcam does not, for unknown reasons. + +Load time options +----------------- + +There are a few load-time options, most of which can be changed after +loading via sysfs as well: + + - alloc_bufs_at_load: Normally, the driver will not allocate any DMA + buffers until the time comes to transfer data. If this option is set, + then worst-case-sized buffers will be allocated at module load time. + This option nails down the memory for the life of the module, but + perhaps decreases the chances of an allocation failure later on. + + - dma_buf_size: The size of DMA buffers to allocate. Note that this + option is only consulted for load-time allocation; when buffers are + allocated at run time, they will be sized appropriately for the current + camera settings. + + - n_dma_bufs: The controller can cycle through either two or three DMA + buffers. Normally, the driver tries to use three buffers; on faster + systems, however, it will work well with only two. + + - min_buffers: The minimum number of streaming I/O buffers that the driver + will consent to work with. Default is one, but, on slower systems, + better behavior with mplayer can be achieved by setting to a higher + value (like six). + + - max_buffers: The maximum number of streaming I/O buffers; default is + ten. That number was carefully picked out of a hat and should not be + assumed to actually mean much of anything. + + - flip: If this boolean parameter is set, the sensor will be instructed to + invert the video image. Whether it makes sense is determined by how + your particular camera is mounted. diff --git a/Documentation/media/v4l-drivers/cardlist.rst b/Documentation/media/v4l-drivers/cardlist.rst new file mode 100644 index 000000000..8a0728d20 --- /dev/null +++ b/Documentation/media/v4l-drivers/cardlist.rst @@ -0,0 +1,18 @@ +Cards List +========== + +.. toctree:: + :maxdepth: 1 + + au0828-cardlist + bttv-cardlist + cx23885-cardlist + cx88-cardlist + em28xx-cardlist + ivtv-cardlist + saa7134-cardlist + saa7164-cardlist + tm6000-cardlist + tuner-cardlist + usbvision-cardlist + gspca-cardlist diff --git a/Documentation/media/v4l-drivers/cpia2.rst b/Documentation/media/v4l-drivers/cpia2.rst new file mode 100644 index 000000000..b5125016c --- /dev/null +++ b/Documentation/media/v4l-drivers/cpia2.rst @@ -0,0 +1,193 @@ +The cpia2 driver +================ + +Authors: Peter Pregler <Peter_Pregler@email.com>, +Scott J. Bertin <scottbertin@yahoo.com>, and +Jarl Totland <Jarl.Totland@bdc.no> for the original cpia driver, which +this one was modelled from. + +Introduction +------------ + +This is a driver for STMicroelectronics's CPiA2 (second generation +Colour Processor Interface ASIC) based cameras. This camera outputs an MJPEG +stream at up to vga size. It implements the Video4Linux interface as much as +possible. Since the V4L interface does not support compressed formats, only +an mjpeg enabled application can be used with the camera. We have modified the +gqcam application to view this stream. + +The driver is implemented as two kernel modules. The cpia2 module +contains the camera functions and the V4L interface. The cpia2_usb module +contains usb specific functions. The main reason for this was the size of the +module was getting out of hand, so I separated them. It is not likely that +there will be a parallel port version. + +Features +-------- + +- Supports cameras with the Vision stv6410 (CIF) and stv6500 (VGA) cmos + sensors. I only have the vga sensor, so can't test the other. +- Image formats: VGA, QVGA, CIF, QCIF, and a number of sizes in between. + VGA and QVGA are the native image sizes for the VGA camera. CIF is done + in the coprocessor by scaling QVGA. All other sizes are done by clipping. +- Palette: YCrCb, compressed with MJPEG. +- Some compression parameters are settable. +- Sensor framerate is adjustable (up to 30 fps CIF, 15 fps VGA). +- Adjust brightness, color, contrast while streaming. +- Flicker control settable for 50 or 60 Hz mains frequency. + +Making and installing the stv672 driver modules +----------------------------------------------- + +Requirements +~~~~~~~~~~~~ + +Video4Linux must be either compiled into the kernel or +available as a module. Video4Linux2 is automatically detected and made +available at compile time. + +Setup +~~~~~ + +Use 'modprobe cpia2' to load and 'modprobe -r cpia2' to unload. This +may be done automatically by your distribution. + +Driver options +~~~~~~~~~~~~~~ + +.. tabularcolumns:: |p{13ex}|L| + + +============== ======================================================== +Option Description +============== ======================================================== +video_nr video device to register (0=/dev/video0, etc) + range -1 to 64. default is -1 (first available) + If you have more than 1 camera, this MUST be -1. +buffer_size Size for each frame buffer in bytes (default 68k) +num_buffers Number of frame buffers (1-32, default 3) +alternate USB Alternate (2-7, default 7) +flicker_freq Frequency for flicker reduction(50 or 60, default 60) +flicker_mode 0 to disable, or 1 to enable flicker reduction. + (default 0). This is only effective if the camera + uses a stv0672 coprocessor. +============== ======================================================== + +Setting the options +~~~~~~~~~~~~~~~~~~~ + +If you are using modules, edit /etc/modules.conf and add an options +line like this: + +.. code-block:: none + + options cpia2 num_buffers=3 buffer_size=65535 + +If the driver is compiled into the kernel, at boot time specify them +like this: + +.. code-block:: none + + cpia2.num_buffers=3 cpia2.buffer_size=65535 + +What buffer size should I use? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The maximum image size depends on the alternate you choose, and the +frame rate achieved by the camera. If the compression engine is able to +keep up with the frame rate, the maximum image size is given by the table +below. + +The compression engine starts out at maximum compression, and will +increase image quality until it is close to the size in the table. As long +as the compression engine can keep up with the frame rate, after a short time +the images will all be about the size in the table, regardless of resolution. + +At low alternate settings, the compression engine may not be able to +compress the image enough and will reduce the frame rate by producing larger +images. + +The default of 68k should be good for most users. This will handle +any alternate at frame rates down to 15fps. For lower frame rates, it may +be necessary to increase the buffer size to avoid having frames dropped due +to insufficient space. + +========== ========== ======== ===== +Alternate bytes/ms 15fps 30fps +========== ========== ======== ===== + 2 128 8533 4267 + 3 384 25600 12800 + 4 640 42667 21333 + 5 768 51200 25600 + 6 896 59733 29867 + 7 1023 68200 34100 +========== ========== ======== ===== + +Table: Image size(bytes) + + +How many buffers should I use? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +For normal streaming, 3 should give the best results. With only 2, +it is possible for the camera to finish sending one image just after a +program has started reading the other. If this happens, the driver must drop +a frame. The exception to this is if you have a heavily loaded machine. In +this case use 2 buffers. You are probably not reading at the full frame rate. +If the camera can send multiple images before a read finishes, it could +overwrite the third buffer before the read finishes, leading to a corrupt +image. Single and double buffering have extra checks to avoid overwriting. + +Using the camera +~~~~~~~~~~~~~~~~ + +We are providing a modified gqcam application to view the output. In +order to avoid confusion, here it is called mview. There is also the qx5view +program which can also control the lights on the qx5 microscope. MJPEG Tools +(http://mjpeg.sourceforge.net) can also be used to record from the camera. + +Notes to developers +~~~~~~~~~~~~~~~~~~~ + + - This is a driver version stripped of the 2.4 back compatibility + and old MJPEG ioctl API. See cpia2.sf.net for 2.4 support. + +Programmer's overview of cpia2 driver +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Cpia2 is the second generation video coprocessor from VLSI Vision Ltd (now a +division of ST Microelectronics). There are two versions. The first is the +STV0672, which is capable of up to 30 frames per second (fps) in frame sizes +up to CIF, and 15 fps for VGA frames. The STV0676 is an improved version, +which can handle up to 30 fps VGA. Both coprocessors can be attached to two +CMOS sensors - the vvl6410 CIF sensor and the vvl6500 VGA sensor. These will +be referred to as the 410 and the 500 sensors, or the CIF and VGA sensors. + +The two chipsets operate almost identically. The core is an 8051 processor, +running two different versions of firmware. The 672 runs the VP4 video +processor code, the 676 runs VP5. There are a few differences in register +mappings for the two chips. In these cases, the symbols defined in the +header files are marked with VP4 or VP5 as part of the symbol name. + +The cameras appear externally as three sets of registers. Setting register +values is the only way to control the camera. Some settings are +interdependant, such as the sequence required to power up the camera. I will +try to make note of all of these cases. + +The register sets are called blocks. Block 0 is the system block. This +section is always powered on when the camera is plugged in. It contains +registers that control housekeeping functions such as powering up the video +processor. The video processor is the VP block. These registers control +how the video from the sensor is processed. Examples are timing registers, +user mode (vga, qvga), scaling, cropping, framerates, and so on. The last +block is the video compressor (VC). The video stream sent from the camera is +compressed as Motion JPEG (JPEGA). The VC controls all of the compression +parameters. Looking at the file cpia2_registers.h, you can get a full view +of these registers and the possible values for most of them. + +One or more registers can be set or read by sending a usb control message to +the camera. There are three modes for this. Block mode requests a number +of contiguous registers. Random mode reads or writes random registers with +a tuple structure containing address/value pairs. The repeat mode is only +used by VP4 to load a firmware patch. It contains a starting address and +a sequence of bytes to be written into a gpio port. diff --git a/Documentation/media/v4l-drivers/cx18.rst b/Documentation/media/v4l-drivers/cx18.rst new file mode 100644 index 000000000..afa03f65b --- /dev/null +++ b/Documentation/media/v4l-drivers/cx18.rst @@ -0,0 +1,37 @@ +The cx18 driver +=============== + +.. note:: + + This documentation is outdated. + +Some notes regarding the cx18 driver for the Conexant CX23418 MPEG +encoder chip: + +1) Currently supported are: + + - Hauppauge HVR-1600 + - Compro VideoMate H900 + - Yuan MPC718 + - Conexant Raptor PAL/SECAM devkit + +2) Some people have problems getting the i2c bus to work. + The symptom is that the eeprom cannot be read and the card is + unusable. This is probably fixed, but if you have problems + then post to the video4linux or ivtv-users mailing list. + +3) VBI (raw or sliced) has not yet been implemented. + +4) MPEG indexing is not yet implemented. + +5) The driver is still a bit rough around the edges, this should + improve over time. + + +Firmware: + +You can obtain the firmware files here: + +http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz + +Untar and copy the .fw files to your firmware directory. diff --git a/Documentation/media/v4l-drivers/cx2341x.rst b/Documentation/media/v4l-drivers/cx2341x.rst new file mode 100644 index 000000000..e06d07ebd --- /dev/null +++ b/Documentation/media/v4l-drivers/cx2341x.rst @@ -0,0 +1,3858 @@ +The cx2341x driver +================== + +Memory at cx2341x chips +----------------------- + +This section describes the cx2341x memory map and documents some of the +register space. + +.. note:: the memory long words are little-endian ('intel format'). + +.. warning:: + + This information was figured out from searching through the memory + and registers, this information may not be correct and is certainly + not complete, and was not derived from anything more than searching + through the memory space with commands like: + + .. code-block:: none + + ivtvctl -O min=0x02000000,max=0x020000ff + + So take this as is, I'm always searching for more stuff, it's a large + register space :-). + +Memory Map +~~~~~~~~~~ + +The cx2341x exposes its entire 64M memory space to the PCI host via the PCI BAR0 +(Base Address Register 0). The addresses here are offsets relative to the +address held in BAR0. + +.. code-block:: none + + 0x00000000-0x00ffffff Encoder memory space + 0x00000000-0x0003ffff Encode.rom + ???-??? MPEG buffer(s) + ???-??? Raw video capture buffer(s) + ???-??? Raw audio capture buffer(s) + ???-??? Display buffers (6 or 9) + + 0x01000000-0x01ffffff Decoder memory space + 0x01000000-0x0103ffff Decode.rom + ???-??? MPEG buffers(s) + 0x0114b000-0x0115afff Audio.rom (deprecated?) + + 0x02000000-0x0200ffff Register Space + +Registers +~~~~~~~~~ + +The registers occupy the 64k space starting at the 0x02000000 offset from BAR0. +All of these registers are 32 bits wide. + +.. code-block:: none + + DMA Registers 0x000-0xff: + + 0x00 - Control: + 0=reset/cancel, 1=read, 2=write, 4=stop + 0x04 - DMA status: + 1=read busy, 2=write busy, 4=read error, 8=write error, 16=link list error + 0x08 - pci DMA pointer for read link list + 0x0c - pci DMA pointer for write link list + 0x10 - read/write DMA enable: + 1=read enable, 2=write enable + 0x14 - always 0xffffffff, if set any lower instability occurs, 0x00 crashes + 0x18 - ?? + 0x1c - always 0x20 or 32, smaller values slow down DMA transactions + 0x20 - always value of 0x780a010a + 0x24-0x3c - usually just random values??? + 0x40 - Interrupt status + 0x44 - Write a bit here and shows up in Interrupt status 0x40 + 0x48 - Interrupt Mask + 0x4C - always value of 0xfffdffff, + if changed to 0xffffffff DMA write interrupts break. + 0x50 - always 0xffffffff + 0x54 - always 0xffffffff (0x4c, 0x50, 0x54 seem like interrupt masks, are + 3 processors on chip, Java ones, VPU, SPU, APU, maybe these are the + interrupt masks???). + 0x60-0x7C - random values + 0x80 - first write linked list reg, for Encoder Memory addr + 0x84 - first write linked list reg, for pci memory addr + 0x88 - first write linked list reg, for length of buffer in memory addr + (|0x80000000 or this for last link) + 0x8c-0xdc - rest of write linked list reg, 8 sets of 3 total, DMA goes here + from linked list addr in reg 0x0c, firmware must push through or + something. + 0xe0 - first (and only) read linked list reg, for pci memory addr + 0xe4 - first (and only) read linked list reg, for Decoder memory addr + 0xe8 - first (and only) read linked list reg, for length of buffer + 0xec-0xff - Nothing seems to be in these registers, 0xec-f4 are 0x00000000. + +Memory locations for Encoder Buffers 0x700-0x7ff: + +These registers show offsets of memory locations pertaining to each +buffer area used for encoding, have to shift them by <<1 first. + +- 0x07F8: Encoder SDRAM refresh +- 0x07FC: Encoder SDRAM pre-charge + +Memory locations for Decoder Buffers 0x800-0x8ff: + +These registers show offsets of memory locations pertaining to each +buffer area used for decoding, have to shift them by <<1 first. + +- 0x08F8: Decoder SDRAM refresh +- 0x08FC: Decoder SDRAM pre-charge + +Other memory locations: + +- 0x2800: Video Display Module control +- 0x2D00: AO (audio output?) control +- 0x2D24: Bytes Flushed +- 0x7000: LSB I2C write clock bit (inverted) +- 0x7004: LSB I2C write data bit (inverted) +- 0x7008: LSB I2C read clock bit +- 0x700c: LSB I2C read data bit +- 0x9008: GPIO get input state +- 0x900c: GPIO set output state +- 0x9020: GPIO direction (Bit7 (GPIO 0..7) - 0:input, 1:output) +- 0x9050: SPU control +- 0x9054: Reset HW blocks +- 0x9058: VPU control +- 0xA018: Bit6: interrupt pending? +- 0xA064: APU command + + +Interrupt Status Register +~~~~~~~~~~~~~~~~~~~~~~~~~ + +The definition of the bits in the interrupt status register 0x0040, and the +interrupt mask 0x0048. If a bit is cleared in the mask, then we want our ISR to +execute. + +- bit 31 Encoder Start Capture +- bit 30 Encoder EOS +- bit 29 Encoder VBI capture +- bit 28 Encoder Video Input Module reset event +- bit 27 Encoder DMA complete +- bit 24 Decoder audio mode change detection event (through event notification) +- bit 22 Decoder data request +- bit 20 Decoder DMA complete +- bit 19 Decoder VBI re-insertion +- bit 18 Decoder DMA err (linked-list bad) + +Missing documentation +--------------------- + +- Encoder API post(?) +- Decoder API post(?) +- Decoder VTRACE event + + +The cx2341x firmware upload +--------------------------- + +This document describes how to upload the cx2341x firmware to the card. + +How to find +~~~~~~~~~~~ + +See the web pages of the various projects that uses this chip for information +on how to obtain the firmware. + +The firmware stored in a Windows driver can be detected as follows: + +- Each firmware image is 256k bytes. +- The 1st 32-bit word of the Encoder image is 0x0000da7 +- The 1st 32-bit word of the Decoder image is 0x00003a7 +- The 2nd 32-bit word of both images is 0xaa55bb66 + +How to load +~~~~~~~~~~~ + +- Issue the FWapi command to stop the encoder if it is running. Wait for the + command to complete. +- Issue the FWapi command to stop the decoder if it is running. Wait for the + command to complete. +- Issue the I2C command to the digitizer to stop emitting VSYNC events. +- Issue the FWapi command to halt the encoder's firmware. +- Sleep for 10ms. +- Issue the FWapi command to halt the decoder's firmware. +- Sleep for 10ms. +- Write 0x00000000 to register 0x2800 to stop the Video Display Module. +- Write 0x00000005 to register 0x2D00 to stop the AO (audio output?). +- Write 0x00000000 to register 0xA064 to ping? the APU. +- Write 0xFFFFFFFE to register 0x9058 to stop the VPU. +- Write 0xFFFFFFFF to register 0x9054 to reset the HW blocks. +- Write 0x00000001 to register 0x9050 to stop the SPU. +- Sleep for 10ms. +- Write 0x0000001A to register 0x07FC to init the Encoder SDRAM's pre-charge. +- Write 0x80000640 to register 0x07F8 to init the Encoder SDRAM's refresh to 1us. +- Write 0x0000001A to register 0x08FC to init the Decoder SDRAM's pre-charge. +- Write 0x80000640 to register 0x08F8 to init the Decoder SDRAM's refresh to 1us. +- Sleep for 512ms. (600ms is recommended) +- Transfer the encoder's firmware image to offset 0 in Encoder memory space. +- Transfer the decoder's firmware image to offset 0 in Decoder memory space. +- Use a read-modify-write operation to Clear bit 0 of register 0x9050 to + re-enable the SPU. +- Sleep for 1 second. +- Use a read-modify-write operation to Clear bits 3 and 0 of register 0x9058 + to re-enable the VPU. +- Sleep for 1 second. +- Issue status API commands to both firmware images to verify. + + +How to call the firmware API +---------------------------- + +The preferred calling convention is known as the firmware mailbox. The +mailboxes are basically a fixed length array that serves as the call-stack. + +Firmware mailboxes can be located by searching the encoder and decoder memory +for a 16 byte signature. That signature will be located on a 256-byte boundary. + +Signature: + +.. code-block:: none + + 0x78, 0x56, 0x34, 0x12, 0x12, 0x78, 0x56, 0x34, + 0x34, 0x12, 0x78, 0x56, 0x56, 0x34, 0x12, 0x78 + +The firmware implements 20 mailboxes of 20 32-bit words. The first 10 are +reserved for API calls. The second 10 are used by the firmware for event +notification. + + ====== ================= + Index Name + ====== ================= + 0 Flags + 1 Command + 2 Return value + 3 Timeout + 4-19 Parameter/Result + ====== ================= + + +The flags are defined in the following table. The direction is from the +perspective of the firmware. + + ==== ========== ============================================ + Bit Direction Purpose + ==== ========== ============================================ + 2 O Firmware has processed the command. + 1 I Driver has finished setting the parameters. + 0 I Driver is using this mailbox. + ==== ========== ============================================ + +The command is a 32-bit enumerator. The API specifics may be found in this +chapter. + +The return value is a 32-bit enumerator. Only two values are currently defined: + +- 0=success +- -1=command undefined. + +There are 16 parameters/results 32-bit fields. The driver populates these fields +with values for all the parameters required by the call. The driver overwrites +these fields with result values returned by the call. + +The timeout value protects the card from a hung driver thread. If the driver +doesn't handle the completed call within the timeout specified, the firmware +will reset that mailbox. + +To make an API call, the driver iterates over each mailbox looking for the +first one available (bit 0 has been cleared). The driver sets that bit, fills +in the command enumerator, the timeout value and any required parameters. The +driver then sets the parameter ready bit (bit 1). The firmware scans the +mailboxes for pending commands, processes them, sets the result code, populates +the result value array with that call's return values and sets the call +complete bit (bit 2). Once bit 2 is set, the driver should retrieve the results +and clear all the flags. If the driver does not perform this task within the +time set in the timeout register, the firmware will reset that mailbox. + +Event notifications are sent from the firmware to the host. The host tells the +firmware which events it is interested in via an API call. That call tells the +firmware which notification mailbox to use. The firmware signals the host via +an interrupt. Only the 16 Results fields are used, the Flags, Command, Return +value and Timeout words are not used. + + +OSD firmware API description +---------------------------- + +.. note:: this API is part of the decoder firmware, so it's cx23415 only. + + + +CX2341X_OSD_GET_FRAMEBUFFER +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 65/0x41 + +Description +^^^^^^^^^^^ + +Return base and length of contiguous OSD memory. + +Result[0] +^^^^^^^^^ + +OSD base address + +Result[1] +^^^^^^^^^ + +OSD length + + + +CX2341X_OSD_GET_PIXEL_FORMAT +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 66/0x42 + +Description +^^^^^^^^^^^ + +Query OSD format + +Result[0] +^^^^^^^^^ + +0=8bit index +1=16bit RGB 5:6:5 +2=16bit ARGB 1:5:5:5 +3=16bit ARGB 1:4:4:4 +4=32bit ARGB 8:8:8:8 + + + +CX2341X_OSD_SET_PIXEL_FORMAT +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 67/0x43 + +Description +^^^^^^^^^^^ + +Assign pixel format + +Param[0] +^^^^^^^^ + +- 0=8bit index +- 1=16bit RGB 5:6:5 +- 2=16bit ARGB 1:5:5:5 +- 3=16bit ARGB 1:4:4:4 +- 4=32bit ARGB 8:8:8:8 + + + +CX2341X_OSD_GET_STATE +~~~~~~~~~~~~~~~~~~~~~ + +Enum: 68/0x44 + +Description +^^^^^^^^^^^ + +Query OSD state + +Result[0] +^^^^^^^^^ + +- Bit 0 0=off, 1=on +- Bits 1:2 alpha control +- Bits 3:5 pixel format + + + +CX2341X_OSD_SET_STATE +~~~~~~~~~~~~~~~~~~~~~ + +Enum: 69/0x45 + +Description +^^^^^^^^^^^ + +OSD switch + +Param[0] +^^^^^^^^ + +0=off, 1=on + + + +CX2341X_OSD_GET_OSD_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 70/0x46 + +Description +^^^^^^^^^^^ + +Retrieve coordinates of OSD area blended with video + +Result[0] +^^^^^^^^^ + +OSD buffer address + +Result[1] +^^^^^^^^^ + +Stride in pixels + +Result[2] +^^^^^^^^^ + +Lines in OSD buffer + +Result[3] +^^^^^^^^^ + +Horizontal offset in buffer + +Result[4] +^^^^^^^^^ + +Vertical offset in buffer + + + +CX2341X_OSD_SET_OSD_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 71/0x47 + +Description +^^^^^^^^^^^ + +Assign the coordinates of the OSD area to blend with video + +Param[0] +^^^^^^^^ + +buffer address + +Param[1] +^^^^^^^^ + +buffer stride in pixels + +Param[2] +^^^^^^^^ + +lines in buffer + +Param[3] +^^^^^^^^ + +horizontal offset + +Param[4] +^^^^^^^^ + +vertical offset + + + +CX2341X_OSD_GET_SCREEN_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 72/0x48 + +Description +^^^^^^^^^^^ + +Retrieve OSD screen area coordinates + +Result[0] +^^^^^^^^^ + +top left horizontal offset + +Result[1] +^^^^^^^^^ + +top left vertical offset + +Result[2] +^^^^^^^^^ + +bottom right horizontal offset + +Result[3] +^^^^^^^^^ + +bottom right vertical offset + + + +CX2341X_OSD_SET_SCREEN_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 73/0x49 + +Description +^^^^^^^^^^^ + +Assign the coordinates of the screen area to blend with video + +Param[0] +^^^^^^^^ + +top left horizontal offset + +Param[1] +^^^^^^^^ + +top left vertical offset + +Param[2] +^^^^^^^^ + +bottom left horizontal offset + +Param[3] +^^^^^^^^ + +bottom left vertical offset + + + +CX2341X_OSD_GET_GLOBAL_ALPHA +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 74/0x4A + +Description +^^^^^^^^^^^ + +Retrieve OSD global alpha + +Result[0] +^^^^^^^^^ + +global alpha: 0=off, 1=on + +Result[1] +^^^^^^^^^ + +bits 0:7 global alpha + + + +CX2341X_OSD_SET_GLOBAL_ALPHA +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 75/0x4B + +Description +^^^^^^^^^^^ + +Update global alpha + +Param[0] +^^^^^^^^ + +global alpha: 0=off, 1=on + +Param[1] +^^^^^^^^ + +global alpha (8 bits) + +Param[2] +^^^^^^^^ + +local alpha: 0=on, 1=off + + + +CX2341X_OSD_SET_BLEND_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 78/0x4C + +Description +^^^^^^^^^^^ + +Move start of blending area within display buffer + +Param[0] +^^^^^^^^ + +horizontal offset in buffer + +Param[1] +^^^^^^^^ + +vertical offset in buffer + + + +CX2341X_OSD_GET_FLICKER_STATE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 79/0x4F + +Description +^^^^^^^^^^^ + +Retrieve flicker reduction module state + +Result[0] +^^^^^^^^^ + +flicker state: 0=off, 1=on + + + +CX2341X_OSD_SET_FLICKER_STATE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 80/0x50 + +Description +^^^^^^^^^^^ + +Set flicker reduction module state + +Param[0] +^^^^^^^^ + +State: 0=off, 1=on + + + +CX2341X_OSD_BLT_COPY +~~~~~~~~~~~~~~~~~~~~ + +Enum: 82/0x52 + +Description +^^^^^^^^^^^ + +BLT copy + +Param[0] +^^^^^^^^ + +.. code-block:: none + + '0000' zero + '0001' ~destination AND ~source + '0010' ~destination AND source + '0011' ~destination + '0100' destination AND ~source + '0101' ~source + '0110' destination XOR source + '0111' ~destination OR ~source + '1000' ~destination AND ~source + '1001' destination XNOR source + '1010' source + '1011' ~destination OR source + '1100' destination + '1101' destination OR ~source + '1110' destination OR source + '1111' one + + +Param[1] +^^^^^^^^ + +Resulting alpha blending + +- '01' source_alpha +- '10' destination_alpha +- '11' source_alpha*destination_alpha+1 + (zero if both source and destination alpha are zero) + +Param[2] +^^^^^^^^ + +.. code-block:: none + + '00' output_pixel = source_pixel + + '01' if source_alpha=0: + output_pixel = destination_pixel + if 256 > source_alpha > 1: + output_pixel = ((source_alpha + 1)*source_pixel + + (255 - source_alpha)*destination_pixel)/256 + + '10' if destination_alpha=0: + output_pixel = source_pixel + if 255 > destination_alpha > 0: + output_pixel = ((255 - destination_alpha)*source_pixel + + (destination_alpha + 1)*destination_pixel)/256 + + '11' if source_alpha=0: + source_temp = 0 + if source_alpha=255: + source_temp = source_pixel*256 + if 255 > source_alpha > 0: + source_temp = source_pixel*(source_alpha + 1) + if destination_alpha=0: + destination_temp = 0 + if destination_alpha=255: + destination_temp = destination_pixel*256 + if 255 > destination_alpha > 0: + destination_temp = destination_pixel*(destination_alpha + 1) + output_pixel = (source_temp + destination_temp)/256 + +Param[3] +^^^^^^^^ + +width + +Param[4] +^^^^^^^^ + +height + +Param[5] +^^^^^^^^ + +destination pixel mask + +Param[6] +^^^^^^^^ + +destination rectangle start address + +Param[7] +^^^^^^^^ + +destination stride in dwords + +Param[8] +^^^^^^^^ + +source stride in dwords + +Param[9] +^^^^^^^^ + +source rectangle start address + + + +CX2341X_OSD_BLT_FILL +~~~~~~~~~~~~~~~~~~~~ + +Enum: 83/0x53 + +Description +^^^^^^^^^^^ + +BLT fill color + +Param[0] +^^^^^^^^ + +Same as Param[0] on API 0x52 + +Param[1] +^^^^^^^^ + +Same as Param[1] on API 0x52 + +Param[2] +^^^^^^^^ + +Same as Param[2] on API 0x52 + +Param[3] +^^^^^^^^ + +width + +Param[4] +^^^^^^^^ + +height + +Param[5] +^^^^^^^^ + +destination pixel mask + +Param[6] +^^^^^^^^ + +destination rectangle start address + +Param[7] +^^^^^^^^ + +destination stride in dwords + +Param[8] +^^^^^^^^ + +color fill value + + + +CX2341X_OSD_BLT_TEXT +~~~~~~~~~~~~~~~~~~~~ + +Enum: 84/0x54 + +Description +^^^^^^^^^^^ + +BLT for 8 bit alpha text source + +Param[0] +^^^^^^^^ + +Same as Param[0] on API 0x52 + +Param[1] +^^^^^^^^ + +Same as Param[1] on API 0x52 + +Param[2] +^^^^^^^^ + +Same as Param[2] on API 0x52 + +Param[3] +^^^^^^^^ + +width + +Param[4] +^^^^^^^^ + +height + +Param[5] +^^^^^^^^ + +destination pixel mask + +Param[6] +^^^^^^^^ + +destination rectangle start address + +Param[7] +^^^^^^^^ + +destination stride in dwords + +Param[8] +^^^^^^^^ + +source stride in dwords + +Param[9] +^^^^^^^^ + +source rectangle start address + +Param[10] +^^^^^^^^^ + +color fill value + + + +CX2341X_OSD_SET_FRAMEBUFFER_WINDOW +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 86/0x56 + +Description +^^^^^^^^^^^ + +Positions the main output window on the screen. The coordinates must be +such that the entire window fits on the screen. + +Param[0] +^^^^^^^^ + +window width + +Param[1] +^^^^^^^^ + +window height + +Param[2] +^^^^^^^^ + +top left window corner horizontal offset + +Param[3] +^^^^^^^^ + +top left window corner vertical offset + + + +CX2341X_OSD_SET_CHROMA_KEY +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 96/0x60 + +Description +^^^^^^^^^^^ + +Chroma key switch and color + +Param[0] +^^^^^^^^ + +state: 0=off, 1=on + +Param[1] +^^^^^^^^ + +color + + + +CX2341X_OSD_GET_ALPHA_CONTENT_INDEX +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 97/0x61 + +Description +^^^^^^^^^^^ + +Retrieve alpha content index + +Result[0] +^^^^^^^^^ + +alpha content index, Range 0:15 + + + +CX2341X_OSD_SET_ALPHA_CONTENT_INDEX +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 98/0x62 + +Description +^^^^^^^^^^^ + +Assign alpha content index + +Param[0] +^^^^^^^^ + +alpha content index, range 0:15 + + +Encoder firmware API description +-------------------------------- + +CX2341X_ENC_PING_FW +~~~~~~~~~~~~~~~~~~~ + +Enum: 128/0x80 + +Description +^^^^^^^^^^^ + +Does nothing. Can be used to check if the firmware is responding. + + + +CX2341X_ENC_START_CAPTURE +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 129/0x81 + +Description +^^^^^^^^^^^ + +Commences the capture of video, audio and/or VBI data. All encoding +parameters must be initialized prior to this API call. Captures frames +continuously or until a predefined number of frames have been captured. + +Param[0] +^^^^^^^^ + +Capture stream type: + + - 0=MPEG + - 1=Raw + - 2=Raw passthrough + - 3=VBI + + +Param[1] +^^^^^^^^ + +Bitmask: + + - Bit 0 when set, captures YUV + - Bit 1 when set, captures PCM audio + - Bit 2 when set, captures VBI (same as param[0]=3) + - Bit 3 when set, the capture destination is the decoder + (same as param[0]=2) + - Bit 4 when set, the capture destination is the host + +.. note:: this parameter is only meaningful for RAW capture type. + + + +CX2341X_ENC_STOP_CAPTURE +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 130/0x82 + +Description +^^^^^^^^^^^ + +Ends a capture in progress + +Param[0] +^^^^^^^^ + +- 0=stop at end of GOP (generates IRQ) +- 1=stop immediate (no IRQ) + +Param[1] +^^^^^^^^ + +Stream type to stop, see param[0] of API 0x81 + +Param[2] +^^^^^^^^ + +Subtype, see param[1] of API 0x81 + + + +CX2341X_ENC_SET_AUDIO_ID +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 137/0x89 + +Description +^^^^^^^^^^^ + +Assigns the transport stream ID of the encoded audio stream + +Param[0] +^^^^^^^^ + +Audio Stream ID + + + +CX2341X_ENC_SET_VIDEO_ID +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 139/0x8B + +Description +^^^^^^^^^^^ + +Set video transport stream ID + +Param[0] +^^^^^^^^ + +Video stream ID + + + +CX2341X_ENC_SET_PCR_ID +~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 141/0x8D + +Description +^^^^^^^^^^^ + +Assigns the transport stream ID for PCR packets + +Param[0] +^^^^^^^^ + +PCR Stream ID + + + +CX2341X_ENC_SET_FRAME_RATE +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 143/0x8F + +Description +^^^^^^^^^^^ + +Set video frames per second. Change occurs at start of new GOP. + +Param[0] +^^^^^^^^ + +- 0=30fps +- 1=25fps + + + +CX2341X_ENC_SET_FRAME_SIZE +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 145/0x91 + +Description +^^^^^^^^^^^ + +Select video stream encoding resolution. + +Param[0] +^^^^^^^^ + +Height in lines. Default 480 + +Param[1] +^^^^^^^^ + +Width in pixels. Default 720 + + + +CX2341X_ENC_SET_BIT_RATE +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 149/0x95 + +Description +^^^^^^^^^^^ + +Assign average video stream bitrate. + +Param[0] +^^^^^^^^ + +0=variable bitrate, 1=constant bitrate + +Param[1] +^^^^^^^^ + +bitrate in bits per second + +Param[2] +^^^^^^^^ + +peak bitrate in bits per second, divided by 400 + +Param[3] +^^^^^^^^ + +Mux bitrate in bits per second, divided by 400. May be 0 (default). + +Param[4] +^^^^^^^^ + +Rate Control VBR Padding + +Param[5] +^^^^^^^^ + +VBV Buffer used by encoder + +.. note:: + + #) Param\[3\] and Param\[4\] seem to be always 0 + #) Param\[5\] doesn't seem to be used. + + + +CX2341X_ENC_SET_GOP_PROPERTIES +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 151/0x97 + +Description +^^^^^^^^^^^ + +Setup the GOP structure + +Param[0] +^^^^^^^^ + +GOP size (maximum is 34) + +Param[1] +^^^^^^^^ + +Number of B frames between the I and P frame, plus 1. +For example: IBBPBBPBBPBB --> GOP size: 12, number of B frames: 2+1 = 3 + +.. note:: + + GOP size must be a multiple of (B-frames + 1). + + + +CX2341X_ENC_SET_ASPECT_RATIO +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 153/0x99 + +Description +^^^^^^^^^^^ + +Sets the encoding aspect ratio. Changes in the aspect ratio take effect +at the start of the next GOP. + +Param[0] +^^^^^^^^ + +- '0000' forbidden +- '0001' 1:1 square +- '0010' 4:3 +- '0011' 16:9 +- '0100' 2.21:1 +- '0101' to '1111' reserved + + + +CX2341X_ENC_SET_DNR_FILTER_MODE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 155/0x9B + +Description +^^^^^^^^^^^ + +Assign Dynamic Noise Reduction operating mode + +Param[0] +^^^^^^^^ + +Bit0: Spatial filter, set=auto, clear=manual +Bit1: Temporal filter, set=auto, clear=manual + +Param[1] +^^^^^^^^ + +Median filter: + +- 0=Disabled +- 1=Horizontal +- 2=Vertical +- 3=Horiz/Vert +- 4=Diagonal + + + +CX2341X_ENC_SET_DNR_FILTER_PROPS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 157/0x9D + +Description +^^^^^^^^^^^ + +These Dynamic Noise Reduction filter values are only meaningful when +the respective filter is set to "manual" (See API 0x9B) + +Param[0] +^^^^^^^^ + +Spatial filter: default 0, range 0:15 + +Param[1] +^^^^^^^^ + +Temporal filter: default 0, range 0:31 + + + +CX2341X_ENC_SET_CORING_LEVELS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 159/0x9F + +Description +^^^^^^^^^^^ + +Assign Dynamic Noise Reduction median filter properties. + +Param[0] +^^^^^^^^ + +Threshold above which the luminance median filter is enabled. +Default: 0, range 0:255 + +Param[1] +^^^^^^^^ + +Threshold below which the luminance median filter is enabled. +Default: 255, range 0:255 + +Param[2] +^^^^^^^^ + +Threshold above which the chrominance median filter is enabled. +Default: 0, range 0:255 + +Param[3] +^^^^^^^^ + +Threshold below which the chrominance median filter is enabled. +Default: 255, range 0:255 + + + +CX2341X_ENC_SET_SPATIAL_FILTER_TYPE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 161/0xA1 + +Description +^^^^^^^^^^^ + +Assign spatial prefilter parameters + +Param[0] +^^^^^^^^ + +Luminance filter + +- 0=Off +- 1=1D Horizontal +- 2=1D Vertical +- 3=2D H/V Separable (default) +- 4=2D Symmetric non-separable + +Param[1] +^^^^^^^^ + +Chrominance filter + +- 0=Off +- 1=1D Horizontal (default) + + + +CX2341X_ENC_SET_VBI_LINE +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 183/0xB7 + +Description +^^^^^^^^^^^ + +Selects VBI line number. + +Param[0] +^^^^^^^^ + +- Bits 0:4 line number +- Bit 31 0=top_field, 1=bottom_field +- Bits 0:31 all set specifies "all lines" + +Param[1] +^^^^^^^^ + +VBI line information features: 0=disabled, 1=enabled + +Param[2] +^^^^^^^^ + +Slicing: 0=None, 1=Closed Caption +Almost certainly not implemented. Set to 0. + +Param[3] +^^^^^^^^ + +Luminance samples in this line. +Almost certainly not implemented. Set to 0. + +Param[4] +^^^^^^^^ + +Chrominance samples in this line +Almost certainly not implemented. Set to 0. + + + +CX2341X_ENC_SET_STREAM_TYPE +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 185/0xB9 + +Description +^^^^^^^^^^^ + +Assign stream type + +.. note:: + + Transport stream is not working in recent firmwares. + And in older firmwares the timestamps in the TS seem to be + unreliable. + +Param[0] +^^^^^^^^ + +- 0=Program stream +- 1=Transport stream +- 2=MPEG1 stream +- 3=PES A/V stream +- 5=PES Video stream +- 7=PES Audio stream +- 10=DVD stream +- 11=VCD stream +- 12=SVCD stream +- 13=DVD_S1 stream +- 14=DVD_S2 stream + + + +CX2341X_ENC_SET_OUTPUT_PORT +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 187/0xBB + +Description +^^^^^^^^^^^ + +Assign stream output port. Normally 0 when the data is copied through +the PCI bus (DMA), and 1 when the data is streamed to another chip +(pvrusb and cx88-blackbird). + +Param[0] +^^^^^^^^ + +- 0=Memory (default) +- 1=Streaming +- 2=Serial + +Param[1] +^^^^^^^^ + +Unknown, but leaving this to 0 seems to work best. Indications are that +this might have to do with USB support, although passing anything but 0 +only breaks things. + + + +CX2341X_ENC_SET_AUDIO_PROPERTIES +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 189/0xBD + +Description +^^^^^^^^^^^ + +Set audio stream properties, may be called while encoding is in progress. + +.. note:: + + All bitfields are consistent with ISO11172 documentation except + bits 2:3 which ISO docs define as: + + - '11' Layer I + - '10' Layer II + - '01' Layer III + - '00' Undefined + + This discrepancy may indicate a possible error in the documentation. + Testing indicated that only Layer II is actually working, and that + the minimum bitrate should be 192 kbps. + +Param[0] +^^^^^^^^ + +Bitmask: + +.. code-block:: none + + 0:1 '00' 44.1Khz + '01' 48Khz + '10' 32Khz + '11' reserved + + 2:3 '01'=Layer I + '10'=Layer II + + 4:7 Bitrate: + Index | Layer I | Layer II + ------+-------------+------------ + '0000' | free format | free format + '0001' | 32 kbit/s | 32 kbit/s + '0010' | 64 kbit/s | 48 kbit/s + '0011' | 96 kbit/s | 56 kbit/s + '0100' | 128 kbit/s | 64 kbit/s + '0101' | 160 kbit/s | 80 kbit/s + '0110' | 192 kbit/s | 96 kbit/s + '0111' | 224 kbit/s | 112 kbit/s + '1000' | 256 kbit/s | 128 kbit/s + '1001' | 288 kbit/s | 160 kbit/s + '1010' | 320 kbit/s | 192 kbit/s + '1011' | 352 kbit/s | 224 kbit/s + '1100' | 384 kbit/s | 256 kbit/s + '1101' | 416 kbit/s | 320 kbit/s + '1110' | 448 kbit/s | 384 kbit/s + + .. note:: + + For Layer II, not all combinations of total bitrate + and mode are allowed. See ISO11172-3 3-Annex B, + Table 3-B.2 + + 8:9 '00'=Stereo + '01'=JointStereo + '10'=Dual + '11'=Mono + + .. note:: + + The cx23415 cannot decode Joint Stereo properly. + + 10:11 Mode Extension used in joint_stereo mode. + In Layer I and II they indicate which subbands are in + intensity_stereo. All other subbands are coded in stereo. + '00' subbands 4-31 in intensity_stereo, bound==4 + '01' subbands 8-31 in intensity_stereo, bound==8 + '10' subbands 12-31 in intensity_stereo, bound==12 + '11' subbands 16-31 in intensity_stereo, bound==16 + + 12:13 Emphasis: + '00' None + '01' 50/15uS + '10' reserved + '11' CCITT J.17 + + 14 CRC: + '0' off + '1' on + + 15 Copyright: + '0' off + '1' on + + 16 Generation: + '0' copy + '1' original + + + +CX2341X_ENC_HALT_FW +~~~~~~~~~~~~~~~~~~~ + +Enum: 195/0xC3 + +Description +^^^^^^^^^^^ + +The firmware is halted and no further API calls are serviced until the +firmware is uploaded again. + + + +CX2341X_ENC_GET_VERSION +~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 196/0xC4 + +Description +^^^^^^^^^^^ + +Returns the version of the encoder firmware. + +Result[0] +^^^^^^^^^ + +Version bitmask: +- Bits 0:15 build +- Bits 16:23 minor +- Bits 24:31 major + + + +CX2341X_ENC_SET_GOP_CLOSURE +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 197/0xC5 + +Description +^^^^^^^^^^^ + +Assigns the GOP open/close property. + +Param[0] +^^^^^^^^ + +- 0=Open +- 1=Closed + + + +CX2341X_ENC_GET_SEQ_END +~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 198/0xC6 + +Description +^^^^^^^^^^^ + +Obtains the sequence end code of the encoder's buffer. When a capture +is started a number of interrupts are still generated, the last of +which will have Result[0] set to 1 and Result[1] will contain the size +of the buffer. + +Result[0] +^^^^^^^^^ + +State of the transfer (1 if last buffer) + +Result[1] +^^^^^^^^^ + +If Result[0] is 1, this contains the size of the last buffer, undefined +otherwise. + + + +CX2341X_ENC_SET_PGM_INDEX_INFO +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 199/0xC7 + +Description +^^^^^^^^^^^ + +Sets the Program Index Information. +The information is stored as follows: + +.. code-block:: c + + struct info { + u32 length; // Length of this frame + u32 offset_low; // Offset in the file of the + u32 offset_high; // start of this frame + u32 mask1; // Bits 0-2 are the type mask: + // 1=I, 2=P, 4=B + // 0=End of Program Index, other fields + // are invalid. + u32 pts; // The PTS of the frame + u32 mask2; // Bit 0 is bit 32 of the pts. + }; + u32 table_ptr; + struct info index[400]; + +The table_ptr is the encoder memory address in the table were +*new* entries will be written. + +.. note:: This is a ringbuffer, so the table_ptr will wraparound. + +Param[0] +^^^^^^^^ + +Picture Mask: +- 0=No index capture +- 1=I frames +- 3=I,P frames +- 7=I,P,B frames + +(Seems to be ignored, it always indexes I, P and B frames) + +Param[1] +^^^^^^^^ + +Elements requested (up to 400) + +Result[0] +^^^^^^^^^ + +Offset in the encoder memory of the start of the table. + +Result[1] +^^^^^^^^^ + +Number of allocated elements up to a maximum of Param[1] + + + +CX2341X_ENC_SET_VBI_CONFIG +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 200/0xC8 + +Description +^^^^^^^^^^^ + +Configure VBI settings + +Param[0] +^^^^^^^^ + +Bitmap: + +.. code-block:: none + + 0 Mode '0' Sliced, '1' Raw + 1:3 Insertion: + '000' insert in extension & user data + '001' insert in private packets + '010' separate stream and user data + '111' separate stream and private data + 8:15 Stream ID (normally 0xBD) + +Param[1] +^^^^^^^^ + +Frames per interrupt (max 8). Only valid in raw mode. + +Param[2] +^^^^^^^^ + +Total raw VBI frames. Only valid in raw mode. + +Param[3] +^^^^^^^^ + +Start codes + +Param[4] +^^^^^^^^ + +Stop codes + +Param[5] +^^^^^^^^ + +Lines per frame + +Param[6] +^^^^^^^^ + +Byte per line + +Result[0] +^^^^^^^^^ + +Observed frames per interrupt in raw mode only. Rage 1 to Param[1] + +Result[1] +^^^^^^^^^ + +Observed number of frames in raw mode. Range 1 to Param[2] + +Result[2] +^^^^^^^^^ + +Memory offset to start or raw VBI data + + + +CX2341X_ENC_SET_DMA_BLOCK_SIZE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 201/0xC9 + +Description +^^^^^^^^^^^ + +Set DMA transfer block size + +Param[0] +^^^^^^^^ + +DMA transfer block size in bytes or frames. When unit is bytes, +supported block sizes are 2^7, 2^8 and 2^9 bytes. + +Param[1] +^^^^^^^^ + +Unit: 0=bytes, 1=frames + + + +CX2341X_ENC_GET_PREV_DMA_INFO_MB_10 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 202/0xCA + +Description +^^^^^^^^^^^ + +Returns information on the previous DMA transfer in conjunction with +bit 27 of the interrupt mask. Uses mailbox 10. + +Result[0] +^^^^^^^^^ + +Type of stream + +Result[1] +^^^^^^^^^ + +Address Offset + +Result[2] +^^^^^^^^^ + +Maximum size of transfer + + + +CX2341X_ENC_GET_PREV_DMA_INFO_MB_9 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 203/0xCB + +Description +^^^^^^^^^^^ + +Returns information on the previous DMA transfer in conjunction with +bit 27 or 18 of the interrupt mask. Uses mailbox 9. + +Result[0] +^^^^^^^^^ + +Status bits: +- 0 read completed +- 1 write completed +- 2 DMA read error +- 3 DMA write error +- 4 Scatter-Gather array error + +Result[1] +^^^^^^^^^ + +DMA type + +Result[2] +^^^^^^^^^ + +Presentation Time Stamp bits 0..31 + +Result[3] +^^^^^^^^^ + +Presentation Time Stamp bit 32 + + + +CX2341X_ENC_SCHED_DMA_TO_HOST +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 204/0xCC + +Description +^^^^^^^^^^^ + +Setup DMA to host operation + +Param[0] +^^^^^^^^ + +Memory address of link list + +Param[1] +^^^^^^^^ + +Length of link list (wtf: what units ???) + +Param[2] +^^^^^^^^ + +DMA type (0=MPEG) + + + +CX2341X_ENC_INITIALIZE_INPUT +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 205/0xCD + +Description +^^^^^^^^^^^ + +Initializes the video input + + + +CX2341X_ENC_SET_FRAME_DROP_RATE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 208/0xD0 + +Description +^^^^^^^^^^^ + +For each frame captured, skip specified number of frames. + +Param[0] +^^^^^^^^ + +Number of frames to skip + + + +CX2341X_ENC_PAUSE_ENCODER +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 210/0xD2 + +Description +^^^^^^^^^^^ + +During a pause condition, all frames are dropped instead of being encoded. + +Param[0] +^^^^^^^^ + +- 0=Pause encoding +- 1=Continue encoding + + + +CX2341X_ENC_REFRESH_INPUT +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 211/0xD3 + +Description +^^^^^^^^^^^ + +Refreshes the video input + + + +CX2341X_ENC_SET_COPYRIGHT +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 212/0xD4 + +Description +^^^^^^^^^^^ + +Sets stream copyright property + +Param[0] +^^^^^^^^ + + +- 0=Stream is not copyrighted +- 1=Stream is copyrighted + + + +CX2341X_ENC_SET_EVENT_NOTIFICATION +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 213/0xD5 + +Description +^^^^^^^^^^^ + +Setup firmware to notify the host about a particular event. Host must +unmask the interrupt bit. + +Param[0] +^^^^^^^^ + +Event (0=refresh encoder input) + +Param[1] +^^^^^^^^ + +Notification 0=disabled 1=enabled + +Param[2] +^^^^^^^^ + +Interrupt bit + +Param[3] +^^^^^^^^ + +Mailbox slot, -1 if no mailbox required. + + + +CX2341X_ENC_SET_NUM_VSYNC_LINES +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 214/0xD6 + +Description +^^^^^^^^^^^ + +Depending on the analog video decoder used, this assigns the number +of lines for field 1 and 2. + +Param[0] +^^^^^^^^ + +Field 1 number of lines: +- 0x00EF for SAA7114 +- 0x00F0 for SAA7115 +- 0x0105 for Micronas + +Param[1] +^^^^^^^^ + +Field 2 number of lines: +- 0x00EF for SAA7114 +- 0x00F0 for SAA7115 +- 0x0106 for Micronas + + + +CX2341X_ENC_SET_PLACEHOLDER +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 215/0xD7 + +Description +^^^^^^^^^^^ + +Provides a mechanism of inserting custom user data in the MPEG stream. + +Param[0] +^^^^^^^^ + +- 0=extension & user data +- 1=private packet with stream ID 0xBD + +Param[1] +^^^^^^^^ + +Rate at which to insert data, in units of frames (for private packet) +or GOPs (for ext. & user data) + +Param[2] +^^^^^^^^ + +Number of data DWORDs (below) to insert + +Param[3] +^^^^^^^^ + +Custom data 0 + +Param[4] +^^^^^^^^ + +Custom data 1 + +Param[5] +^^^^^^^^ + +Custom data 2 + +Param[6] +^^^^^^^^ + +Custom data 3 + +Param[7] +^^^^^^^^ + +Custom data 4 + +Param[8] +^^^^^^^^ + +Custom data 5 + +Param[9] +^^^^^^^^ + +Custom data 6 + +Param[10] +^^^^^^^^^ + +Custom data 7 + +Param[11] +^^^^^^^^^ + +Custom data 8 + + + +CX2341X_ENC_MUTE_VIDEO +~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 217/0xD9 + +Description +^^^^^^^^^^^ + +Video muting + +Param[0] +^^^^^^^^ + +Bit usage: + +.. code-block:: none + + 0 '0'=video not muted + '1'=video muted, creates frames with the YUV color defined below + 1:7 Unused + 8:15 V chrominance information + 16:23 U chrominance information + 24:31 Y luminance information + + + +CX2341X_ENC_MUTE_AUDIO +~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 218/0xDA + +Description +^^^^^^^^^^^ + +Audio muting + +Param[0] +^^^^^^^^ + +- 0=audio not muted +- 1=audio muted (produces silent mpeg audio stream) + + + +CX2341X_ENC_SET_VERT_CROP_LINE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 219/0xDB + +Description +^^^^^^^^^^^ + +Something to do with 'Vertical Crop Line' + +Param[0] +^^^^^^^^ + +If saa7114 and raw VBI capture and 60 Hz, then set to 10001. +Else 0. + + + +CX2341X_ENC_MISC +~~~~~~~~~~~~~~~~ + +Enum: 220/0xDC + +Description +^^^^^^^^^^^ + +Miscellaneous actions. Not known for 100% what it does. It's really a +sort of ioctl call. The first parameter is a command number, the second +the value. + +Param[0] +^^^^^^^^ + +Command number: + +.. code-block:: none + + 1=set initial SCR value when starting encoding (works). + 2=set quality mode (apparently some test setting). + 3=setup advanced VIM protection handling. + Always 1 for the cx23416 and 0 for cx23415. + 4=generate DVD compatible PTS timestamps + 5=USB flush mode + 6=something to do with the quantization matrix + 7=set navigation pack insertion for DVD: adds 0xbf (private stream 2) + packets to the MPEG. The size of these packets is 2048 bytes (including + the header of 6 bytes: 0x000001bf + length). The payload is zeroed and + it is up to the application to fill them in. These packets are apparently + inserted every four frames. + 8=enable scene change detection (seems to be a failure) + 9=set history parameters of the video input module + 10=set input field order of VIM + 11=set quantization matrix + 12=reset audio interface after channel change or input switch (has no argument). + Needed for the cx2584x, not needed for the mspx4xx, but it doesn't seem to + do any harm calling it regardless. + 13=set audio volume delay + 14=set audio delay + + +Param[1] +^^^^^^^^ + +Command value. + +Decoder firmware API description +-------------------------------- + +.. note:: this API is part of the decoder firmware, so it's cx23415 only. + + + +CX2341X_DEC_PING_FW +~~~~~~~~~~~~~~~~~~~ + +Enum: 0/0x00 + +Description +^^^^^^^^^^^ + +This API call does nothing. It may be used to check if the firmware +is responding. + + + +CX2341X_DEC_START_PLAYBACK +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 1/0x01 + +Description +^^^^^^^^^^^ + +Begin or resume playback. + +Param[0] +^^^^^^^^ + +0 based frame number in GOP to begin playback from. + +Param[1] +^^^^^^^^ + +Specifies the number of muted audio frames to play before normal +audio resumes. (This is not implemented in the firmware, leave at 0) + + + +CX2341X_DEC_STOP_PLAYBACK +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 2/0x02 + +Description +^^^^^^^^^^^ + +Ends playback and clears all decoder buffers. If PTS is not zero, +playback stops at specified PTS. + +Param[0] +^^^^^^^^ + +Display 0=last frame, 1=black + +.. note:: + + this takes effect immediately, so if you want to wait for a PTS, + then use '0', otherwise the screen goes to black at once. + You can call this later (even if there is no playback) with a 1 value + to set the screen to black. + +Param[1] +^^^^^^^^ + +PTS low + +Param[2] +^^^^^^^^ + +PTS high + + + +CX2341X_DEC_SET_PLAYBACK_SPEED +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 3/0x03 + +Description +^^^^^^^^^^^ + +Playback stream at speed other than normal. There are two modes of +operation: + + - Smooth: host transfers entire stream and firmware drops unused + frames. + - Coarse: host drops frames based on indexing as required to achieve + desired speed. + +Param[0] +^^^^^^^^ + +.. code-block:: none + + Bitmap: + 0:7 0 normal + 1 fast only "1.5 times" + n nX fast, 1/nX slow + 30 Framedrop: + '0' during 1.5 times play, every other B frame is dropped + '1' during 1.5 times play, stream is unchanged (bitrate + must not exceed 8mbps) + 31 Speed: + '0' slow + '1' fast + +.. note:: + + n is limited to 2. Anything higher does not result in + faster playback. Instead the host should start dropping frames. + +Param[1] +^^^^^^^^ + +Direction: 0=forward, 1=reverse + +.. note:: + + to make reverse playback work you have to write full GOPs in + reverse order. + +Param[2] +^^^^^^^^ + +.. code-block:: none + + Picture mask: + 1=I frames + 3=I, P frames + 7=I, P, B frames + +Param[3] +^^^^^^^^ + +B frames per GOP (for reverse play only) + +.. note:: + + for reverse playback the Picture Mask should be set to I or I, P. + Adding B frames to the mask will result in corrupt video. This field + has to be set to the correct value in order to keep the timing correct. + +Param[4] +^^^^^^^^ + +Mute audio: 0=disable, 1=enable + +Param[5] +^^^^^^^^ + +Display 0=frame, 1=field + +Param[6] +^^^^^^^^ + +Specifies the number of muted audio frames to play before normal audio +resumes. (Not implemented in the firmware, leave at 0) + + + +CX2341X_DEC_STEP_VIDEO +~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 5/0x05 + +Description +^^^^^^^^^^^ + +Each call to this API steps the playback to the next unit defined below +in the current playback direction. + +Param[0] +^^^^^^^^ + +0=frame, 1=top field, 2=bottom field + + + +CX2341X_DEC_SET_DMA_BLOCK_SIZE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 8/0x08 + +Description +^^^^^^^^^^^ + +Set DMA transfer block size. Counterpart to API 0xC9 + +Param[0] +^^^^^^^^ + +DMA transfer block size in bytes. A different size may be specified +when issuing the DMA transfer command. + + + +CX2341X_DEC_GET_XFER_INFO +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 9/0x09 + +Description +^^^^^^^^^^^ + +This API call may be used to detect an end of stream condition. + +Result[0] +^^^^^^^^^ + +Stream type + +Result[1] +^^^^^^^^^ + +Address offset + +Result[2] +^^^^^^^^^ + +Maximum bytes to transfer + +Result[3] +^^^^^^^^^ + +Buffer fullness + + + +CX2341X_DEC_GET_DMA_STATUS +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 10/0x0A + +Description +^^^^^^^^^^^ + +Status of the last DMA transfer + +Result[0] +^^^^^^^^^ + +Bit 1 set means transfer complete +Bit 2 set means DMA error +Bit 3 set means linked list error + +Result[1] +^^^^^^^^^ + +DMA type: 0=MPEG, 1=OSD, 2=YUV + + + +CX2341X_DEC_SCHED_DMA_FROM_HOST +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 11/0x0B + +Description +^^^^^^^^^^^ + +Setup DMA from host operation. Counterpart to API 0xCC + +Param[0] +^^^^^^^^ + +Memory address of link list + +Param[1] +^^^^^^^^ + +Total # of bytes to transfer + +Param[2] +^^^^^^^^ + +DMA type (0=MPEG, 1=OSD, 2=YUV) + + + +CX2341X_DEC_PAUSE_PLAYBACK +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 13/0x0D + +Description +^^^^^^^^^^^ + +Freeze playback immediately. In this mode, when internal buffers are +full, no more data will be accepted and data request IRQs will be +masked. + +Param[0] +^^^^^^^^ + +Display: 0=last frame, 1=black + + + +CX2341X_DEC_HALT_FW +~~~~~~~~~~~~~~~~~~~ + +Enum: 14/0x0E + +Description +^^^^^^^^^^^ + +The firmware is halted and no further API calls are serviced until +the firmware is uploaded again. + + + +CX2341X_DEC_SET_STANDARD +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 16/0x10 + +Description +^^^^^^^^^^^ + +Selects display standard + +Param[0] +^^^^^^^^ + +0=NTSC, 1=PAL + + + +CX2341X_DEC_GET_VERSION +~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 17/0x11 + +Description +^^^^^^^^^^^ + +Returns decoder firmware version information + +Result[0] +^^^^^^^^^ + +Version bitmask: + - Bits 0:15 build + - Bits 16:23 minor + - Bits 24:31 major + + + +CX2341X_DEC_SET_STREAM_INPUT +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 20/0x14 + +Description +^^^^^^^^^^^ + +Select decoder stream input port + +Param[0] +^^^^^^^^ + +0=memory (default), 1=streaming + + + +CX2341X_DEC_GET_TIMING_INFO +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 21/0x15 + +Description +^^^^^^^^^^^ + +Returns timing information from start of playback + +Result[0] +^^^^^^^^^ + +Frame count by decode order + +Result[1] +^^^^^^^^^ + +Video PTS bits 0:31 by display order + +Result[2] +^^^^^^^^^ + +Video PTS bit 32 by display order + +Result[3] +^^^^^^^^^ + +SCR bits 0:31 by display order + +Result[4] +^^^^^^^^^ + +SCR bit 32 by display order + + + +CX2341X_DEC_SET_AUDIO_MODE +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 22/0x16 + +Description +^^^^^^^^^^^ + +Select audio mode + +Param[0] +^^^^^^^^ + +Dual mono mode action + 0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged + +Param[1] +^^^^^^^^ + +Stereo mode action: + 0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged + + + +CX2341X_DEC_SET_EVENT_NOTIFICATION +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 23/0x17 + +Description +^^^^^^^^^^^ + +Setup firmware to notify the host about a particular event. +Counterpart to API 0xD5 + +Param[0] +^^^^^^^^ + +Event: + - 0=Audio mode change between mono, (joint) stereo and dual channel. + - 3=Decoder started + - 4=Unknown: goes off 10-15 times per second while decoding. + - 5=Some sync event: goes off once per frame. + +Param[1] +^^^^^^^^ + +Notification 0=disabled, 1=enabled + +Param[2] +^^^^^^^^ + +Interrupt bit + +Param[3] +^^^^^^^^ + +Mailbox slot, -1 if no mailbox required. + + + +CX2341X_DEC_SET_DISPLAY_BUFFERS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 24/0x18 + +Description +^^^^^^^^^^^ + +Number of display buffers. To decode all frames in reverse playback you +must use nine buffers. + +Param[0] +^^^^^^^^ + +0=six buffers, 1=nine buffers + + + +CX2341X_DEC_EXTRACT_VBI +~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 25/0x19 + +Description +^^^^^^^^^^^ + +Extracts VBI data + +Param[0] +^^^^^^^^ + +0=extract from extension & user data, 1=extract from private packets + +Result[0] +^^^^^^^^^ + +VBI table location + +Result[1] +^^^^^^^^^ + +VBI table size + + + +CX2341X_DEC_SET_DECODER_SOURCE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 26/0x1A + +Description +^^^^^^^^^^^ + +Selects decoder source. Ensure that the parameters passed to this +API match the encoder settings. + +Param[0] +^^^^^^^^ + +Mode: 0=MPEG from host, 1=YUV from encoder, 2=YUV from host + +Param[1] +^^^^^^^^ + +YUV picture width + +Param[2] +^^^^^^^^ + +YUV picture height + +Param[3] +^^^^^^^^ + +Bitmap: see Param[0] of API 0xBD + + + +CX2341X_DEC_SET_PREBUFFERING +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 30/0x1E + +Description +^^^^^^^^^^^ + +Decoder prebuffering, when enabled up to 128KB are buffered for +streams <8mpbs or 640KB for streams >8mbps + +Param[0] +^^^^^^^^ + +0=off, 1=on + +PVR350 Video decoder registers 0x02002800 -> 0x02002B00 +------------------------------------------------------- + +Author: Ian Armstrong <ian@iarmst.demon.co.uk> + +Version: v0.4 + +Date: 12 March 2007 + + +This list has been worked out through trial and error. There will be mistakes +and omissions. Some registers have no obvious effect so it's hard to say what +they do, while others interact with each other, or require a certain load +sequence. Horizontal filter setup is one example, with six registers working +in unison and requiring a certain load sequence to correctly configure. The +indexed colour palette is much easier to set at just two registers, but again +it requires a certain load sequence. + +Some registers are fussy about what they are set to. Load in a bad value & the +decoder will fail. A firmware reload will often recover, but sometimes a reset +is required. For registers containing size information, setting them to 0 is +generally a bad idea. For other control registers i.e. 2878, you'll only find +out what values are bad when it hangs. + +.. code-block:: none + + -------------------------------------------------------------------------------- + 2800 + bit 0 + Decoder enable + 0 = disable + 1 = enable + -------------------------------------------------------------------------------- + 2804 + bits 0:31 + Decoder horizontal Y alias register 1 + --------------- + 2808 + bits 0:31 + Decoder horizontal Y alias register 2 + --------------- + 280C + bits 0:31 + Decoder horizontal Y alias register 3 + --------------- + 2810 + bits 0:31 + Decoder horizontal Y alias register 4 + --------------- + 2814 + bits 0:31 + Decoder horizontal Y alias register 5 + --------------- + 2818 + bits 0:31 + Decoder horizontal Y alias trigger + + These six registers control the horizontal aliasing filter for the Y plane. + The first five registers must all be loaded before accessing the trigger + (2818), as this register actually clocks the data through for the first + five. + + To correctly program set the filter, this whole procedure must be done 16 + times. The actual register contents are copied from a lookup-table in the + firmware which contains 4 different filter settings. + + -------------------------------------------------------------------------------- + 281C + bits 0:31 + Decoder horizontal UV alias register 1 + --------------- + 2820 + bits 0:31 + Decoder horizontal UV alias register 2 + --------------- + 2824 + bits 0:31 + Decoder horizontal UV alias register 3 + --------------- + 2828 + bits 0:31 + Decoder horizontal UV alias register 4 + --------------- + 282C + bits 0:31 + Decoder horizontal UV alias register 5 + --------------- + 2830 + bits 0:31 + Decoder horizontal UV alias trigger + + These six registers control the horizontal aliasing for the UV plane. + Operation is the same as the Y filter, with 2830 being the trigger + register. + + -------------------------------------------------------------------------------- + 2834 + bits 0:15 + Decoder Y source width in pixels + + bits 16:31 + Decoder Y destination width in pixels + --------------- + 2838 + bits 0:15 + Decoder UV source width in pixels + + bits 16:31 + Decoder UV destination width in pixels + + NOTE: For both registers, the resulting image must be fully visible on + screen. If the image exceeds the right edge both the source and destination + size must be adjusted to reflect the visible portion. For the source width, + you must take into account the scaling when calculating the new value. + -------------------------------------------------------------------------------- + + 283C + bits 0:31 + Decoder Y horizontal scaling + Normally = Reg 2854 >> 2 + --------------- + 2840 + bits 0:31 + Decoder ?? unknown - horizontal scaling + Usually 0x00080514 + --------------- + 2844 + bits 0:31 + Decoder UV horizontal scaling + Normally = Reg 2854 >> 2 + --------------- + 2848 + bits 0:31 + Decoder ?? unknown - horizontal scaling + Usually 0x00100514 + --------------- + 284C + bits 0:31 + Decoder ?? unknown - Y plane + Usually 0x00200020 + --------------- + 2850 + bits 0:31 + Decoder ?? unknown - UV plane + Usually 0x00200020 + --------------- + 2854 + bits 0:31 + Decoder 'master' value for horizontal scaling + --------------- + 2858 + bits 0:31 + Decoder ?? unknown + Usually 0 + --------------- + 285C + bits 0:31 + Decoder ?? unknown + Normally = Reg 2854 >> 1 + --------------- + 2860 + bits 0:31 + Decoder ?? unknown + Usually 0 + --------------- + 2864 + bits 0:31 + Decoder ?? unknown + Normally = Reg 2854 >> 1 + --------------- + 2868 + bits 0:31 + Decoder ?? unknown + Usually 0 + + Most of these registers either control horizontal scaling, or appear linked + to it in some way. Register 2854 contains the 'master' value & the other + registers can be calculated from that one. You must also remember to + correctly set the divider in Reg 2874. + + To enlarge: + Reg 2854 = (source_width * 0x00200000) / destination_width + Reg 2874 = No divide + + To reduce from full size down to half size: + Reg 2854 = (source_width/2 * 0x00200000) / destination width + Reg 2874 = Divide by 2 + + To reduce from half size down to quarter size: + Reg 2854 = (source_width/4 * 0x00200000) / destination width + Reg 2874 = Divide by 4 + + The result is always rounded up. + + -------------------------------------------------------------------------------- + 286C + bits 0:15 + Decoder horizontal Y buffer offset + + bits 15:31 + Decoder horizontal UV buffer offset + + Offset into the video image buffer. If the offset is gradually incremented, + the on screen image will move left & wrap around higher up on the right. + + -------------------------------------------------------------------------------- + 2870 + bits 0:15 + Decoder horizontal Y output offset + + bits 16:31 + Decoder horizontal UV output offset + + Offsets the actual video output. Controls output alignment of the Y & UV + planes. The higher the value, the greater the shift to the left. Use + reg 2890 to move the image right. + + -------------------------------------------------------------------------------- + 2874 + bits 0:1 + Decoder horizontal Y output size divider + 00 = No divide + 01 = Divide by 2 + 10 = Divide by 3 + + bits 4:5 + Decoder horizontal UV output size divider + 00 = No divide + 01 = Divide by 2 + 10 = Divide by 3 + + bit 8 + Decoder ?? unknown + 0 = Normal + 1 = Affects video output levels + + bit 16 + Decoder ?? unknown + 0 = Normal + 1 = Disable horizontal filter + + -------------------------------------------------------------------------------- + 2878 + bit 0 + ?? unknown + + bit 1 + osd on/off + 0 = osd off + 1 = osd on + + bit 2 + Decoder + osd video timing + 0 = NTSC + 1 = PAL + + bits 3:4 + ?? unknown + + bit 5 + Decoder + osd + Swaps upper & lower fields + + -------------------------------------------------------------------------------- + 287C + bits 0:10 + Decoder & osd ?? unknown + Moves entire screen horizontally. Starts at 0x005 with the screen + shifted heavily to the right. Incrementing in steps of 0x004 will + gradually shift the screen to the left. + + bits 11:31 + ?? unknown + + Normally contents are 0x00101111 (NTSC) or 0x1010111d (PAL) + + -------------------------------------------------------------------------------- + 2880 -------- ?? unknown + 2884 -------- ?? unknown + -------------------------------------------------------------------------------- + 2888 + bit 0 + Decoder + osd ?? unknown + 0 = Normal + 1 = Misaligned fields (Correctable through 289C & 28A4) + + bit 4 + ?? unknown + + bit 8 + ?? unknown + + Warning: Bad values will require a firmware reload to recover. + Known to be bad are 0x000,0x011,0x100,0x111 + -------------------------------------------------------------------------------- + 288C + bits 0:15 + osd ?? unknown + Appears to affect the osd position stability. The higher the value the + more unstable it becomes. Decoder output remains stable. + + bits 16:31 + osd ?? unknown + Same as bits 0:15 + + -------------------------------------------------------------------------------- + 2890 + bits 0:11 + Decoder output horizontal offset. + + Horizontal offset moves the video image right. A small left shift is + possible, but it's better to use reg 2870 for that due to its greater + range. + + NOTE: Video corruption will occur if video window is shifted off the right + edge. To avoid this read the notes for 2834 & 2838. + -------------------------------------------------------------------------------- + 2894 + bits 0:23 + Decoder output video surround colour. + + Contains the colour (in yuv) used to fill the screen when the video is + running in a window. + -------------------------------------------------------------------------------- + 2898 + bits 0:23 + Decoder video window colour + Contains the colour (in yuv) used to fill the video window when the + video is turned off. + + bit 24 + Decoder video output + 0 = Video on + 1 = Video off + + bit 28 + Decoder plane order + 0 = Y,UV + 1 = UV,Y + + bit 29 + Decoder second plane byte order + 0 = Normal (UV) + 1 = Swapped (VU) + + In normal usage, the first plane is Y & the second plane is UV. Though the + order of the planes can be swapped, only the byte order of the second plane + can be swapped. This isn't much use for the Y plane, but can be useful for + the UV plane. + + -------------------------------------------------------------------------------- + 289C + bits 0:15 + Decoder vertical field offset 1 + + bits 16:31 + Decoder vertical field offset 2 + + Controls field output vertical alignment. The higher the number, the lower + the image on screen. Known starting values are 0x011E0017 (NTSC) & + 0x01500017 (PAL) + -------------------------------------------------------------------------------- + 28A0 + bits 0:15 + Decoder & osd width in pixels + + bits 16:31 + Decoder & osd height in pixels + + All output from the decoder & osd are disabled beyond this area. Decoder + output will simply go black outside of this region. If the osd tries to + exceed this area it will become corrupt. + -------------------------------------------------------------------------------- + 28A4 + bits 0:11 + osd left shift. + + Has a range of 0x770->0x7FF. With the exception of 0, any value outside of + this range corrupts the osd. + -------------------------------------------------------------------------------- + 28A8 + bits 0:15 + osd vertical field offset 1 + + bits 16:31 + osd vertical field offset 2 + + Controls field output vertical alignment. The higher the number, the lower + the image on screen. Known starting values are 0x011E0017 (NTSC) & + 0x01500017 (PAL) + -------------------------------------------------------------------------------- + 28AC -------- ?? unknown + | + V + 28BC -------- ?? unknown + -------------------------------------------------------------------------------- + 28C0 + bit 0 + Current output field + 0 = first field + 1 = second field + + bits 16:31 + Current scanline + The scanline counts from the top line of the first field + through to the last line of the second field. + -------------------------------------------------------------------------------- + 28C4 -------- ?? unknown + | + V + 28F8 -------- ?? unknown + -------------------------------------------------------------------------------- + 28FC + bit 0 + ?? unknown + 0 = Normal + 1 = Breaks decoder & osd output + -------------------------------------------------------------------------------- + 2900 + bits 0:31 + Decoder vertical Y alias register 1 + --------------- + 2904 + bits 0:31 + Decoder vertical Y alias register 2 + --------------- + 2908 + bits 0:31 + Decoder vertical Y alias trigger + + These three registers control the vertical aliasing filter for the Y plane. + Operation is similar to the horizontal Y filter (2804). The only real + difference is that there are only two registers to set before accessing + the trigger register (2908). As for the horizontal filter, the values are + taken from a lookup table in the firmware, and the procedure must be + repeated 16 times to fully program the filter. + -------------------------------------------------------------------------------- + 290C + bits 0:31 + Decoder vertical UV alias register 1 + --------------- + 2910 + bits 0:31 + Decoder vertical UV alias register 2 + --------------- + 2914 + bits 0:31 + Decoder vertical UV alias trigger + + These three registers control the vertical aliasing filter for the UV + plane. Operation is the same as the Y filter, with 2914 being the trigger. + -------------------------------------------------------------------------------- + 2918 + bits 0:15 + Decoder Y source height in pixels + + bits 16:31 + Decoder Y destination height in pixels + --------------- + 291C + bits 0:15 + Decoder UV source height in pixels divided by 2 + + bits 16:31 + Decoder UV destination height in pixels + + NOTE: For both registers, the resulting image must be fully visible on + screen. If the image exceeds the bottom edge both the source and + destination size must be adjusted to reflect the visible portion. For the + source height, you must take into account the scaling when calculating the + new value. + -------------------------------------------------------------------------------- + 2920 + bits 0:31 + Decoder Y vertical scaling + Normally = Reg 2930 >> 2 + --------------- + 2924 + bits 0:31 + Decoder Y vertical scaling + Normally = Reg 2920 + 0x514 + --------------- + 2928 + bits 0:31 + Decoder UV vertical scaling + When enlarging = Reg 2930 >> 2 + When reducing = Reg 2930 >> 3 + --------------- + 292C + bits 0:31 + Decoder UV vertical scaling + Normally = Reg 2928 + 0x514 + --------------- + 2930 + bits 0:31 + Decoder 'master' value for vertical scaling + --------------- + 2934 + bits 0:31 + Decoder ?? unknown - Y vertical scaling + --------------- + 2938 + bits 0:31 + Decoder Y vertical scaling + Normally = Reg 2930 + --------------- + 293C + bits 0:31 + Decoder ?? unknown - Y vertical scaling + --------------- + 2940 + bits 0:31 + Decoder UV vertical scaling + When enlarging = Reg 2930 >> 1 + When reducing = Reg 2930 + --------------- + 2944 + bits 0:31 + Decoder ?? unknown - UV vertical scaling + --------------- + 2948 + bits 0:31 + Decoder UV vertical scaling + Normally = Reg 2940 + --------------- + 294C + bits 0:31 + Decoder ?? unknown - UV vertical scaling + + Most of these registers either control vertical scaling, or appear linked + to it in some way. Register 2930 contains the 'master' value & all other + registers can be calculated from that one. You must also remember to + correctly set the divider in Reg 296C + + To enlarge: + Reg 2930 = (source_height * 0x00200000) / destination_height + Reg 296C = No divide + + To reduce from full size down to half size: + Reg 2930 = (source_height/2 * 0x00200000) / destination height + Reg 296C = Divide by 2 + + To reduce from half down to quarter. + Reg 2930 = (source_height/4 * 0x00200000) / destination height + Reg 296C = Divide by 4 + + -------------------------------------------------------------------------------- + 2950 + bits 0:15 + Decoder Y line index into display buffer, first field + + bits 16:31 + Decoder Y vertical line skip, first field + -------------------------------------------------------------------------------- + 2954 + bits 0:15 + Decoder Y line index into display buffer, second field + + bits 16:31 + Decoder Y vertical line skip, second field + -------------------------------------------------------------------------------- + 2958 + bits 0:15 + Decoder UV line index into display buffer, first field + + bits 16:31 + Decoder UV vertical line skip, first field + -------------------------------------------------------------------------------- + 295C + bits 0:15 + Decoder UV line index into display buffer, second field + + bits 16:31 + Decoder UV vertical line skip, second field + -------------------------------------------------------------------------------- + 2960 + bits 0:15 + Decoder destination height minus 1 + + bits 16:31 + Decoder destination height divided by 2 + -------------------------------------------------------------------------------- + 2964 + bits 0:15 + Decoder Y vertical offset, second field + + bits 16:31 + Decoder Y vertical offset, first field + + These two registers shift the Y plane up. The higher the number, the + greater the shift. + -------------------------------------------------------------------------------- + 2968 + bits 0:15 + Decoder UV vertical offset, second field + + bits 16:31 + Decoder UV vertical offset, first field + + These two registers shift the UV plane up. The higher the number, the + greater the shift. + -------------------------------------------------------------------------------- + 296C + bits 0:1 + Decoder vertical Y output size divider + 00 = No divide + 01 = Divide by 2 + 10 = Divide by 4 + + bits 8:9 + Decoder vertical UV output size divider + 00 = No divide + 01 = Divide by 2 + 10 = Divide by 4 + -------------------------------------------------------------------------------- + 2970 + bit 0 + Decoder ?? unknown + 0 = Normal + 1 = Affect video output levels + + bit 16 + Decoder ?? unknown + 0 = Normal + 1 = Disable vertical filter + + -------------------------------------------------------------------------------- + 2974 -------- ?? unknown + | + V + 29EF -------- ?? unknown + -------------------------------------------------------------------------------- + 2A00 + bits 0:2 + osd colour mode + 000 = 8 bit indexed + 001 = 16 bit (565) + 010 = 15 bit (555) + 011 = 12 bit (444) + 100 = 32 bit (8888) + + bits 4:5 + osd display bpp + 01 = 8 bit + 10 = 16 bit + 11 = 32 bit + + bit 8 + osd global alpha + 0 = Off + 1 = On + + bit 9 + osd local alpha + 0 = Off + 1 = On + + bit 10 + osd colour key + 0 = Off + 1 = On + + bit 11 + osd ?? unknown + Must be 1 + + bit 13 + osd colour space + 0 = ARGB + 1 = AYVU + + bits 16:31 + osd ?? unknown + Must be 0x001B (some kind of buffer pointer ?) + + When the bits-per-pixel is set to 8, the colour mode is ignored and + assumed to be 8 bit indexed. For 16 & 32 bits-per-pixel the colour depth + is honoured, and when using a colour depth that requires fewer bytes than + allocated the extra bytes are used as padding. So for a 32 bpp with 8 bit + index colour, there are 3 padding bytes per pixel. It's also possible to + select 16bpp with a 32 bit colour mode. This results in the pixel width + being doubled, but the color key will not work as expected in this mode. + + Colour key is as it suggests. You designate a colour which will become + completely transparent. When using 565, 555 or 444 colour modes, the + colour key is always 16 bits wide. The colour to key on is set in Reg 2A18. + + Local alpha works differently depending on the colour mode. For 32bpp & 8 + bit indexed, local alpha is a per-pixel 256 step transparency, with 0 being + transparent and 255 being solid. For the 16bpp modes 555 & 444, the unused + bit(s) act as a simple transparency switch, with 0 being solid & 1 being + fully transparent. There is no local alpha support for 16bit 565. + + Global alpha is a 256 step transparency that applies to the entire osd, + with 0 being transparent & 255 being solid. + + It's possible to combine colour key, local alpha & global alpha. + -------------------------------------------------------------------------------- + 2A04 + bits 0:15 + osd x coord for left edge + + bits 16:31 + osd y coord for top edge + --------------- + 2A08 + bits 0:15 + osd x coord for right edge + + bits 16:31 + osd y coord for bottom edge + + For both registers, (0,0) = top left corner of the display area. These + registers do not control the osd size, only where it's positioned & how + much is visible. The visible osd area cannot exceed the right edge of the + display, otherwise the osd will become corrupt. See reg 2A10 for + setting osd width. + -------------------------------------------------------------------------------- + 2A0C + bits 0:31 + osd buffer index + + An index into the osd buffer. Slowly incrementing this moves the osd left, + wrapping around onto the right edge + -------------------------------------------------------------------------------- + 2A10 + bits 0:11 + osd buffer 32 bit word width + + Contains the width of the osd measured in 32 bit words. This means that all + colour modes are restricted to a byte width which is divisible by 4. + -------------------------------------------------------------------------------- + 2A14 + bits 0:15 + osd height in pixels + + bits 16:32 + osd line index into buffer + osd will start displaying from this line. + -------------------------------------------------------------------------------- + 2A18 + bits 0:31 + osd colour key + + Contains the colour value which will be transparent. + -------------------------------------------------------------------------------- + 2A1C + bits 0:7 + osd global alpha + + Contains the global alpha value (equiv ivtvfbctl --alpha XX) + -------------------------------------------------------------------------------- + 2A20 -------- ?? unknown + | + V + 2A2C -------- ?? unknown + -------------------------------------------------------------------------------- + 2A30 + bits 0:7 + osd colour to change in indexed palette + --------------- + 2A34 + bits 0:31 + osd colour for indexed palette + + To set the new palette, first load the index of the colour to change into + 2A30, then load the new colour into 2A34. The full palette is 256 colours, + so the index range is 0x00-0xFF + -------------------------------------------------------------------------------- + 2A38 -------- ?? unknown + 2A3C -------- ?? unknown + -------------------------------------------------------------------------------- + 2A40 + bits 0:31 + osd ?? unknown + + Affects overall brightness, wrapping around to black + -------------------------------------------------------------------------------- + 2A44 + bits 0:31 + osd ?? unknown + + Green tint + -------------------------------------------------------------------------------- + 2A48 + bits 0:31 + osd ?? unknown + + Red tint + -------------------------------------------------------------------------------- + 2A4C + bits 0:31 + osd ?? unknown + + Affects overall brightness, wrapping around to black + -------------------------------------------------------------------------------- + 2A50 + bits 0:31 + osd ?? unknown + + Colour shift + -------------------------------------------------------------------------------- + 2A54 + bits 0:31 + osd ?? unknown + + Colour shift + -------------------------------------------------------------------------------- + 2A58 -------- ?? unknown + | + V + 2AFC -------- ?? unknown + -------------------------------------------------------------------------------- + 2B00 + bit 0 + osd filter control + 0 = filter off + 1 = filter on + + bits 1:4 + osd ?? unknown + + -------------------------------------------------------------------------------- + +The cx231xx DMA engine +---------------------- + + +This page describes the structures and procedures used by the cx2341x DMA +engine. + +Introduction +~~~~~~~~~~~~ + +The cx2341x PCI interface is busmaster capable. This means it has a DMA +engine to efficiently transfer large volumes of data between the card and main +memory without requiring help from a CPU. Like most hardware, it must operate +on contiguous physical memory. This is difficult to come by in large quantities +on virtual memory machines. + +Therefore, it also supports a technique called "scatter-gather". The card can +transfer multiple buffers in one operation. Instead of allocating one large +contiguous buffer, the driver can allocate several smaller buffers. + +In practice, I've seen the average transfer to be roughly 80K, but transfers +above 128K were not uncommon, particularly at startup. The 128K figure is +important, because that is the largest block that the kernel can normally +allocate. Even still, 128K blocks are hard to come by, so the driver writer is +urged to choose a smaller block size and learn the scatter-gather technique. + +Mailbox #10 is reserved for DMA transfer information. + +Note: the hardware expects little-endian data ('intel format'). + +Flow +~~~~ + +This section describes, in general, the order of events when handling DMA +transfers. Detailed information follows this section. + +- The card raises the Encoder interrupt. +- The driver reads the transfer type, offset and size from Mailbox #10. +- The driver constructs the scatter-gather array from enough free dma buffers + to cover the size. +- The driver schedules the DMA transfer via the ScheduleDMAtoHost API call. +- The card raises the DMA Complete interrupt. +- The driver checks the DMA status register for any errors. +- The driver post-processes the newly transferred buffers. + +NOTE! It is possible that the Encoder and DMA Complete interrupts get raised +simultaneously. (End of the last, start of the next, etc.) + +Mailbox #10 +~~~~~~~~~~~ + +The Flags, Command, Return Value and Timeout fields are ignored. + +- Name: Mailbox #10 +- Results[0]: Type: 0: MPEG. +- Results[1]: Offset: The position relative to the card's memory space. +- Results[2]: Size: The exact number of bytes to transfer. + +My speculation is that since the StartCapture API has a capture type of "RAW" +available, that the type field will have other values that correspond to YUV +and PCM data. + +Scatter-Gather Array +~~~~~~~~~~~~~~~~~~~~ + +The scatter-gather array is a contiguously allocated block of memory that +tells the card the source and destination of each data-block to transfer. +Card "addresses" are derived from the offset supplied by Mailbox #10. Host +addresses are the physical memory location of the target DMA buffer. + +Each S-G array element is a struct of three 32-bit words. The first word is +the source address, the second is the destination address. Both take up the +entire 32 bits. The lowest 18 bits of the third word is the transfer byte +count. The high-bit of the third word is the "last" flag. The last-flag tells +the card to raise the DMA_DONE interrupt. From hard personal experience, if +you forget to set this bit, the card will still "work" but the stream will +most likely get corrupted. + +The transfer count must be a multiple of 256. Therefore, the driver will need +to track how much data in the target buffer is valid and deal with it +accordingly. + +Array Element: + +- 32-bit Source Address +- 32-bit Destination Address +- 14-bit reserved (high bit is the last flag) +- 18-bit byte count + +DMA Transfer Status +~~~~~~~~~~~~~~~~~~~ + +Register 0x0004 holds the DMA Transfer Status: + +- bit 0: read completed +- bit 1: write completed +- bit 2: DMA read error +- bit 3: DMA write error +- bit 4: Scatter-Gather array error + +Non-compressed file format +-------------------------- + +The cx23416 can produce (and the cx23415 can also read) raw YUV output. The +format of a YUV frame is specific to this chip and is called HM12. 'HM' stands +for 'Hauppauge Macroblock', which is a misnomer as 'Conexant Macroblock' would +be more accurate. + +The format is YUV 4:2:0 which uses 1 Y byte per pixel and 1 U and V byte per +four pixels. + +The data is encoded as two macroblock planes, the first containing the Y +values, the second containing UV macroblocks. + +The Y plane is divided into blocks of 16x16 pixels from left to right +and from top to bottom. Each block is transmitted in turn, line-by-line. + +So the first 16 bytes are the first line of the top-left block, the +second 16 bytes are the second line of the top-left block, etc. After +transmitting this block the first line of the block on the right to the +first block is transmitted, etc. + +The UV plane is divided into blocks of 16x8 UV values going from left +to right, top to bottom. Each block is transmitted in turn, line-by-line. + +So the first 16 bytes are the first line of the top-left block and +contain 8 UV value pairs (16 bytes in total). The second 16 bytes are the +second line of 8 UV pairs of the top-left block, etc. After transmitting +this block the first line of the block on the right to the first block is +transmitted, etc. + +The code below is given as an example on how to convert HM12 to separate +Y, U and V planes. This code assumes frames of 720x576 (PAL) pixels. + +The width of a frame is always 720 pixels, regardless of the actual specified +width. + +If the height is not a multiple of 32 lines, then the captured video is +missing macroblocks at the end and is unusable. So the height must be a +multiple of 32. + +Raw format c example +~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: c + + #include <stdio.h> + #include <stdlib.h> + #include <string.h> + + static unsigned char frame[576*720*3/2]; + static unsigned char framey[576*720]; + static unsigned char frameu[576*720 / 4]; + static unsigned char framev[576*720 / 4]; + + static void de_macro_y(unsigned char* dst, unsigned char *src, int dstride, int w, int h) + { + unsigned int y, x, i; + + // descramble Y plane + // dstride = 720 = w + // The Y plane is divided into blocks of 16x16 pixels + // Each block in transmitted in turn, line-by-line. + for (y = 0; y < h; y += 16) { + for (x = 0; x < w; x += 16) { + for (i = 0; i < 16; i++) { + memcpy(dst + x + (y + i) * dstride, src, 16); + src += 16; + } + } + } + } + + static void de_macro_uv(unsigned char *dstu, unsigned char *dstv, unsigned char *src, int dstride, int w, int h) + { + unsigned int y, x, i; + + // descramble U/V plane + // dstride = 720 / 2 = w + // The U/V values are interlaced (UVUV...). + // Again, the UV plane is divided into blocks of 16x16 UV values. + // Each block in transmitted in turn, line-by-line. + for (y = 0; y < h; y += 16) { + for (x = 0; x < w; x += 8) { + for (i = 0; i < 16; i++) { + int idx = x + (y + i) * dstride; + + dstu[idx+0] = src[0]; dstv[idx+0] = src[1]; + dstu[idx+1] = src[2]; dstv[idx+1] = src[3]; + dstu[idx+2] = src[4]; dstv[idx+2] = src[5]; + dstu[idx+3] = src[6]; dstv[idx+3] = src[7]; + dstu[idx+4] = src[8]; dstv[idx+4] = src[9]; + dstu[idx+5] = src[10]; dstv[idx+5] = src[11]; + dstu[idx+6] = src[12]; dstv[idx+6] = src[13]; + dstu[idx+7] = src[14]; dstv[idx+7] = src[15]; + src += 16; + } + } + } + } + + /*************************************************************************/ + int main(int argc, char **argv) + { + FILE *fin; + int i; + + if (argc == 1) fin = stdin; + else fin = fopen(argv[1], "r"); + + if (fin == NULL) { + fprintf(stderr, "cannot open input\n"); + exit(-1); + } + while (fread(frame, sizeof(frame), 1, fin) == 1) { + de_macro_y(framey, frame, 720, 720, 576); + de_macro_uv(frameu, framev, frame + 720 * 576, 720 / 2, 720 / 2, 576 / 2); + fwrite(framey, sizeof(framey), 1, stdout); + fwrite(framev, sizeof(framev), 1, stdout); + fwrite(frameu, sizeof(frameu), 1, stdout); + } + fclose(fin); + return 0; + } + + +Format of embedded V4L2_MPEG_STREAM_VBI_FMT_IVTV VBI data +--------------------------------------------------------- + +Author: Hans Verkuil <hverkuil@xs4all.nl> + + +This section describes the V4L2_MPEG_STREAM_VBI_FMT_IVTV format of the VBI data +embedded in an MPEG-2 program stream. This format is in part dictated by some +hardware limitations of the ivtv driver (the driver for the Conexant cx23415/6 +chips), in particular a maximum size for the VBI data. Anything longer is cut +off when the MPEG stream is played back through the cx23415. + +The advantage of this format is it is very compact and that all VBI data for +all lines can be stored while still fitting within the maximum allowed size. + +The stream ID of the VBI data is 0xBD. The maximum size of the embedded data is +4 + 43 * 36, which is 4 bytes for a header and 2 * 18 VBI lines with a 1 byte +header and a 42 bytes payload each. Anything beyond this limit is cut off by +the cx23415/6 firmware. Besides the data for the VBI lines we also need 36 bits +for a bitmask determining which lines are captured and 4 bytes for a magic cookie, +signifying that this data package contains V4L2_MPEG_STREAM_VBI_FMT_IVTV VBI data. +If all lines are used, then there is no longer room for the bitmask. To solve this +two different magic numbers were introduced: + +'itv0': After this magic number two unsigned longs follow. Bits 0-17 of the first +unsigned long denote which lines of the first field are captured. Bits 18-31 of +the first unsigned long and bits 0-3 of the second unsigned long are used for the +second field. + +'ITV0': This magic number assumes all VBI lines are captured, i.e. it implicitly +implies that the bitmasks are 0xffffffff and 0xf. + +After these magic cookies (and the 8 byte bitmask in case of cookie 'itv0') the +captured VBI lines start: + +For each line the least significant 4 bits of the first byte contain the data type. +Possible values are shown in the table below. The payload is in the following 42 +bytes. + +Here is the list of possible data types: + +.. code-block:: c + + #define IVTV_SLICED_TYPE_TELETEXT 0x1 // Teletext (uses lines 6-22 for PAL) + #define IVTV_SLICED_TYPE_CC 0x4 // Closed Captions (line 21 NTSC) + #define IVTV_SLICED_TYPE_WSS 0x5 // Wide Screen Signal (line 23 PAL) + #define IVTV_SLICED_TYPE_VPS 0x7 // Video Programming System (PAL) (line 16) + diff --git a/Documentation/media/v4l-drivers/cx23885-cardlist.rst b/Documentation/media/v4l-drivers/cx23885-cardlist.rst new file mode 100644 index 000000000..8c24df8e0 --- /dev/null +++ b/Documentation/media/v4l-drivers/cx23885-cardlist.rst @@ -0,0 +1,261 @@ +cx23885 cards list +================== + +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - PCI IDs + + * - 0 + - UNKNOWN/GENERIC + - 0070:3400 + + * - 1 + - Hauppauge WinTV-HVR1800lp + - 0070:7600 + + * - 2 + - Hauppauge WinTV-HVR1800 + - 0070:7800, 0070:7801, 0070:7809 + + * - 3 + - Hauppauge WinTV-HVR1250 + - 0070:7911 + + * - 4 + - DViCO FusionHDTV5 Express + - 18ac:d500 + + * - 5 + - Hauppauge WinTV-HVR1500Q + - 0070:7790, 0070:7797 + + * - 6 + - Hauppauge WinTV-HVR1500 + - 0070:7710, 0070:7717 + + * - 7 + - Hauppauge WinTV-HVR1200 + - 0070:71d1, 0070:71d3 + + * - 8 + - Hauppauge WinTV-HVR1700 + - 0070:8101 + + * - 9 + - Hauppauge WinTV-HVR1400 + - 0070:8010 + + * - 10 + - DViCO FusionHDTV7 Dual Express + - 18ac:d618 + + * - 11 + - DViCO FusionHDTV DVB-T Dual Express + - 18ac:db78 + + * - 12 + - Leadtek Winfast PxDVR3200 H + - 107d:6681 + + * - 13 + - Compro VideoMate E650F + - 185b:e800 + + * - 14 + - TurboSight TBS 6920 + - 6920:8888 + + * - 15 + - TeVii S470 + - d470:9022 + + * - 16 + - DVBWorld DVB-S2 2005 + - 0001:2005 + + * - 17 + - NetUP Dual DVB-S2 CI + - 1b55:2a2c + + * - 18 + - Hauppauge WinTV-HVR1270 + - 0070:2211 + + * - 19 + - Hauppauge WinTV-HVR1275 + - 0070:2215, 0070:221d, 0070:22f2 + + * - 20 + - Hauppauge WinTV-HVR1255 + - 0070:2251, 0070:22f1 + + * - 21 + - Hauppauge WinTV-HVR1210 + - 0070:2291, 0070:2295, 0070:2299, 0070:229d, 0070:22f0, 0070:22f3, 0070:22f4, 0070:22f5 + + * - 22 + - Mygica X8506 DMB-TH + - 14f1:8651 + + * - 23 + - Magic-Pro ProHDTV Extreme 2 + - 14f1:8657 + + * - 24 + - Hauppauge WinTV-HVR1850 + - 0070:8541 + + * - 25 + - Compro VideoMate E800 + - 1858:e800 + + * - 26 + - Hauppauge WinTV-HVR1290 + - 0070:8551 + + * - 27 + - Mygica X8558 PRO DMB-TH + - 14f1:8578 + + * - 28 + - LEADTEK WinFast PxTV1200 + - 107d:6f22 + + * - 29 + - GoTView X5 3D Hybrid + - 5654:2390 + + * - 30 + - NetUP Dual DVB-T/C-CI RF + - 1b55:e2e4 + + * - 31 + - Leadtek Winfast PxDVR3200 H XC4000 + - 107d:6f39 + + * - 32 + - MPX-885 + - + + * - 33 + - Mygica X8502/X8507 ISDB-T + - 14f1:8502 + + * - 34 + - TerraTec Cinergy T PCIe Dual + - 153b:117e + + * - 35 + - TeVii S471 + - d471:9022 + + * - 36 + - Hauppauge WinTV-HVR1255 + - 0070:2259 + + * - 37 + - Prof Revolution DVB-S2 8000 + - 8000:3034 + + * - 38 + - Hauppauge WinTV-HVR4400/HVR5500 + - 0070:c108, 0070:c138, 0070:c1f8 + + * - 39 + - AVerTV Hybrid Express Slim HC81R + - 1461:d939 + + * - 40 + - TurboSight TBS 6981 + - 6981:8888 + + * - 41 + - TurboSight TBS 6980 + - 6980:8888 + + * - 42 + - Leadtek Winfast PxPVR2200 + - 107d:6f21 + + * - 43 + - Hauppauge ImpactVCB-e + - 0070:7133, 0070:7137 + + * - 44 + - DViCO FusionHDTV DVB-T Dual Express2 + - 18ac:db98 + + * - 45 + - DVBSky T9580 + - 4254:9580 + + * - 46 + - DVBSky T980C + - 4254:980c + + * - 47 + - DVBSky S950C + - 4254:950c + + * - 48 + - Technotrend TT-budget CT2-4500 CI + - 13c2:3013 + + * - 49 + - DVBSky S950 + - 4254:0950 + + * - 50 + - DVBSky S952 + - 4254:0952 + + * - 51 + - DVBSky T982 + - 4254:0982 + + * - 52 + - Hauppauge WinTV-HVR5525 + - 0070:f038 + + * - 53 + - Hauppauge WinTV Starburst + - 0070:c12a + + * - 54 + - ViewCast 260e + - 1576:0260 + + * - 55 + - ViewCast 460e + - 1576:0460 + + * - 56 + - Hauppauge WinTV-QuadHD-DVB + - 0070:6a28, 0070:6b28 + + * - 57 + - Hauppauge WinTV-QuadHD-ATSC + - 0070:6a18, 0070:6b18 + + * - 58 + - Hauppauge WinTV-HVR-1265(161111) + - 0070:2a18 + + * - 59 + - Hauppauge WinTV-Starburst2 + - 0070:f02a + + * - 60 + - Hauppauge WinTV-QuadHD-DVB(885) + - + + * - 61 + - Hauppauge WinTV-QuadHD-ATSC(885) + - diff --git a/Documentation/media/v4l-drivers/cx88-cardlist.rst b/Documentation/media/v4l-drivers/cx88-cardlist.rst new file mode 100644 index 000000000..21648b8c2 --- /dev/null +++ b/Documentation/media/v4l-drivers/cx88-cardlist.rst @@ -0,0 +1,377 @@ +CX88 cards list +=============== + +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - PCI IDs + + * - 0 + - UNKNOWN/GENERIC + - + + * - 1 + - Hauppauge WinTV 34xxx models + - 0070:3400, 0070:3401 + + * - 2 + - GDI Black Gold + - 14c7:0106, 14c7:0107 + + * - 3 + - PixelView + - 1554:4811 + + * - 4 + - ATI TV Wonder Pro + - 1002:00f8, 1002:00f9 + + * - 5 + - Leadtek Winfast 2000XP Expert + - 107d:6611, 107d:6613 + + * - 6 + - AverTV Studio 303 (M126) + - 1461:000b + + * - 7 + - MSI TV-@nywhere Master + - 1462:8606 + + * - 8 + - Leadtek Winfast DV2000 + - 107d:6620, 107d:6621 + + * - 9 + - Leadtek PVR 2000 + - 107d:663b, 107d:663c, 107d:6632, 107d:6630, 107d:6638, 107d:6631, 107d:6637, 107d:663d + + * - 10 + - IODATA GV-VCP3/PCI + - 10fc:d003 + + * - 11 + - Prolink PlayTV PVR + - + + * - 12 + - ASUS PVR-416 + - 1043:4823, 1461:c111 + + * - 13 + - MSI TV-@nywhere + - + + * - 14 + - KWorld/VStream XPert DVB-T + - 17de:08a6 + + * - 15 + - DViCO FusionHDTV DVB-T1 + - 18ac:db00 + + * - 16 + - KWorld LTV883RF + - + + * - 17 + - DViCO FusionHDTV 3 Gold-Q + - 18ac:d810, 18ac:d800 + + * - 18 + - Hauppauge Nova-T DVB-T + - 0070:9002, 0070:9001, 0070:9000 + + * - 19 + - Conexant DVB-T reference design + - 14f1:0187 + + * - 20 + - Provideo PV259 + - 1540:2580 + + * - 21 + - DViCO FusionHDTV DVB-T Plus + - 18ac:db10, 18ac:db11 + + * - 22 + - pcHDTV HD3000 HDTV + - 7063:3000 + + * - 23 + - digitalnow DNTV Live! DVB-T + - 17de:a8a6 + + * - 24 + - Hauppauge WinTV 28xxx (Roslyn) models + - 0070:2801 + + * - 25 + - Digital-Logic MICROSPACE Entertainment Center (MEC) + - 14f1:0342 + + * - 26 + - IODATA GV/BCTV7E + - 10fc:d035 + + * - 27 + - PixelView PlayTV Ultra Pro (Stereo) + - + + * - 28 + - DViCO FusionHDTV 3 Gold-T + - 18ac:d820 + + * - 29 + - ADS Tech Instant TV DVB-T PCI + - 1421:0334 + + * - 30 + - TerraTec Cinergy 1400 DVB-T + - 153b:1166 + + * - 31 + - DViCO FusionHDTV 5 Gold + - 18ac:d500 + + * - 32 + - AverMedia UltraTV Media Center PCI 550 + - 1461:8011 + + * - 33 + - Kworld V-Stream Xpert DVD + - + + * - 34 + - ATI HDTV Wonder + - 1002:a101 + + * - 35 + - WinFast DTV1000-T + - 107d:665f + + * - 36 + - AVerTV 303 (M126) + - 1461:000a + + * - 37 + - Hauppauge Nova-S-Plus DVB-S + - 0070:9201, 0070:9202 + + * - 38 + - Hauppauge Nova-SE2 DVB-S + - 0070:9200 + + * - 39 + - KWorld DVB-S 100 + - 17de:08b2, 1421:0341 + + * - 40 + - Hauppauge WinTV-HVR1100 DVB-T/Hybrid + - 0070:9400, 0070:9402 + + * - 41 + - Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) + - 0070:9800, 0070:9802 + + * - 42 + - digitalnow DNTV Live! DVB-T Pro + - 1822:0025, 1822:0019 + + * - 43 + - KWorld/VStream XPert DVB-T with cx22702 + - 17de:08a1, 12ab:2300 + + * - 44 + - DViCO FusionHDTV DVB-T Dual Digital + - 18ac:db50, 18ac:db54 + + * - 45 + - KWorld HardwareMpegTV XPert + - 17de:0840, 1421:0305 + + * - 46 + - DViCO FusionHDTV DVB-T Hybrid + - 18ac:db40, 18ac:db44 + + * - 47 + - pcHDTV HD5500 HDTV + - 7063:5500 + + * - 48 + - Kworld MCE 200 Deluxe + - 17de:0841 + + * - 49 + - PixelView PlayTV P7000 + - 1554:4813 + + * - 50 + - NPG Tech Real TV FM Top 10 + - 14f1:0842 + + * - 51 + - WinFast DTV2000 H + - 107d:665e + + * - 52 + - Geniatech DVB-S + - 14f1:0084 + + * - 53 + - Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T + - 0070:1404, 0070:1400, 0070:1401, 0070:1402 + + * - 54 + - Norwood Micro TV Tuner + - + + * - 55 + - Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM + - c180:c980 + + * - 56 + - Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder + - 0070:9600, 0070:9601, 0070:9602 + + * - 57 + - ADS Tech Instant Video PCI + - 1421:0390 + + * - 58 + - Pinnacle PCTV HD 800i + - 11bd:0051 + + * - 59 + - DViCO FusionHDTV 5 PCI nano + - 18ac:d530 + + * - 60 + - Pinnacle Hybrid PCTV + - 12ab:1788 + + * - 61 + - Leadtek TV2000 XP Global + - 107d:6f18, 107d:6618, 107d:6619 + + * - 62 + - PowerColor RA330 + - 14f1:ea3d + + * - 63 + - Geniatech X8000-MT DVBT + - 14f1:8852 + + * - 64 + - DViCO FusionHDTV DVB-T PRO + - 18ac:db30 + + * - 65 + - DViCO FusionHDTV 7 Gold + - 18ac:d610 + + * - 66 + - Prolink Pixelview MPEG 8000GT + - 1554:4935 + + * - 67 + - Kworld PlusTV HD PCI 120 (ATSC 120) + - 17de:08c1 + + * - 68 + - Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid + - 0070:6900, 0070:6904, 0070:6902 + + * - 69 + - Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 + - 0070:6905, 0070:6906 + + * - 70 + - TeVii S460 DVB-S/S2 + - d460:9022 + + * - 71 + - Omicom SS4 DVB-S/S2 PCI + - A044:2011 + + * - 72 + - TBS 8920 DVB-S/S2 + - 8920:8888 + + * - 73 + - TeVii S420 DVB-S + - d420:9022 + + * - 74 + - Prolink Pixelview Global Extreme + - 1554:4976 + + * - 75 + - PROF 7300 DVB-S/S2 + - B033:3033 + + * - 76 + - SATTRADE ST4200 DVB-S/S2 + - b200:4200 + + * - 77 + - TBS 8910 DVB-S + - 8910:8888 + + * - 78 + - Prof 6200 DVB-S + - b022:3022 + + * - 79 + - Terratec Cinergy HT PCI MKII + - 153b:1177 + + * - 80 + - Hauppauge WinTV-IR Only + - 0070:9290 + + * - 81 + - Leadtek WinFast DTV1800 Hybrid + - 107d:6654 + + * - 82 + - WinFast DTV2000 H rev. J + - 107d:6f2b + + * - 83 + - Prof 7301 DVB-S/S2 + - b034:3034 + + * - 84 + - Samsung SMT 7020 DVB-S + - 18ac:dc00, 18ac:dccd + + * - 85 + - Twinhan VP-1027 DVB-S + - 1822:0023 + + * - 86 + - TeVii S464 DVB-S/S2 + - d464:9022 + + * - 87 + - Leadtek WinFast DTV2000 H PLUS + - 107d:6f42 + + * - 88 + - Leadtek WinFast DTV1800 H (XC4000) + - 107d:6f38 + + * - 89 + - Leadtek TV2000 XP Global (SC4100) + - 107d:6f36 + + * - 90 + - Leadtek TV2000 XP Global (XC4100) + - 107d:6f43 diff --git a/Documentation/media/v4l-drivers/cx88.rst b/Documentation/media/v4l-drivers/cx88.rst new file mode 100644 index 000000000..d8f3a0147 --- /dev/null +++ b/Documentation/media/v4l-drivers/cx88.rst @@ -0,0 +1,163 @@ +The cx88 driver +=============== + +Author: Gerd Hoffmann + +This is a v4l2 device driver for the cx2388x chip. + + +Current status +-------------- + +video + - Works. + - Overlay isn't supported. + +audio + - Works. The TV standard detection is made by the driver, as the + hardware has bugs to auto-detect. + - audio data dma (i.e. recording without loopback cable to the + sound card) is supported via cx88-alsa. + +vbi + - Works. + + +How to add support for new cards +-------------------------------- + +The driver needs some config info for the TV cards. This stuff is in +cx88-cards.c. If the driver doesn't work well you likely need a new +entry for your card in that file. Check the kernel log (using dmesg) +to see whenever the driver knows your card or not. There is a line +like this one: + +.. code-block:: none + + cx8800[0]: subsystem: 0070:3400, board: Hauppauge WinTV \ + 34xxx models [card=1,autodetected] + +If your card is listed as "board: UNKNOWN/GENERIC" it is unknown to +the driver. What to do then? + +1) Try upgrading to the latest snapshot, maybe it has been added + meanwhile. +2) You can try to create a new entry yourself, have a look at + cx88-cards.c. If that worked, mail me your changes as unified + diff ("diff -u"). +3) Or you can mail me the config information. We need at least the + following information to add the card: + + - the PCI Subsystem ID ("0070:3400" from the line above, + "lspci -v" output is fine too). + - the tuner type used by the card. You can try to find one by + trial-and-error using the tuner=<n> insmod option. If you + know which one the card has you can also have a look at the + list in CARDLIST.tuner + +Documentation missing at the cx88 datasheet +------------------------------------------- + +MO_OUTPUT_FORMAT (0x310164) + +.. code-block:: none + + Previous default from DScaler: 0x1c1f0008 + Digit 8: 31-28 + 28: PREVREMOD = 1 + + Digit 7: 27-24 (0xc = 12 = b1100 ) + 27: COMBALT = 1 + 26: PAL_INV_PHASE + (DScaler apparently set this to 1, resulted in sucky picture) + + Digits 6,5: 23-16 + 25-16: COMB_RANGE = 0x1f [default] (9 bits -> max 512) + + Digit 4: 15-12 + 15: DISIFX = 0 + 14: INVCBF = 0 + 13: DISADAPT = 0 + 12: NARROWADAPT = 0 + + Digit 3: 11-8 + 11: FORCE2H + 10: FORCEREMD + 9: NCHROMAEN + 8: NREMODEN + + Digit 2: 7-4 + 7-6: YCORE + 5-4: CCORE + + Digit 1: 3-0 + 3: RANGE = 1 + 2: HACTEXT + 1: HSFMT + +0x47 is the sync byte for MPEG-2 transport stream packets. +Datasheet incorrectly states to use 47 decimal. 188 is the length. +All DVB compliant frontends output packets with this start code. + +Hauppauge WinTV cx88 IR information +----------------------------------- + +The controls for the mux are GPIO [0,1] for source, and GPIO 2 for muting. + +====== ======== ================================================= +GPIO0 GPIO1 +====== ======== ================================================= + 0 0 TV Audio + 1 0 FM radio + 0 1 Line-In + 1 1 Mono tuner bypass or CD passthru (tuner specific) +====== ======== ================================================= + +GPIO 16(I believe) is tied to the IR port (if present). + + +From the data sheet: + +- Register 24'h20004 PCI Interrupt Status + + - bit [18] IR_SMP_INT Set when 32 input samples have been collected over + - gpio[16] pin into GP_SAMPLE register. + +What's missing from the data sheet: + +- Setup 4KHz sampling rate (roughly 2x oversampled; good enough for our RC5 + compat remote) +- set register 0x35C050 to 0xa80a80 +- enable sampling +- set register 0x35C054 to 0x5 +- enable the IRQ bit 18 in the interrupt mask register (and + provide for a handler) + +GP_SAMPLE register is at 0x35C058 + +Bits are then right shifted into the GP_SAMPLE register at the specified +rate; you get an interrupt when a full DWORD is received. +You need to recover the actual RC5 bits out of the (oversampled) IR sensor +bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data) An +actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment. + +I'm pretty sure when no IR signal is present the receiver is always in a +marking state(1); but stray light, etc can cause intermittent noise values +as well. Remember, this is a free running sample of the IR receiver state +over time, so don't assume any sample starts at any particular place. + +Additional info +~~~~~~~~~~~~~~~ + +This data sheet (google search) seems to have a lovely description of the +RC5 basics: +http://www.atmel.com/dyn/resources/prod_documents/doc2817.pdf + +This document has more data: +http://www.nenya.be/beor/electronics/rc5.htm + +This document has a how to decode a bi-phase data stream: +http://www.ee.washington.edu/circuit_archive/text/ir_decode.txt + +This document has still more info: +http://www.xs4all.nl/~sbp/knowledge/ir/rc5.htm diff --git a/Documentation/media/v4l-drivers/davinci-vpbe.rst b/Documentation/media/v4l-drivers/davinci-vpbe.rst new file mode 100644 index 000000000..b545fe001 --- /dev/null +++ b/Documentation/media/v4l-drivers/davinci-vpbe.rst @@ -0,0 +1,95 @@ +The VPBE V4L2 driver design +=========================== + +File partitioning +----------------- + + V4L2 display device driver + drivers/media/platform/davinci/vpbe_display.c + drivers/media/platform/davinci/vpbe_display.h + + VPBE display controller + drivers/media/platform/davinci/vpbe.c + drivers/media/platform/davinci/vpbe.h + + VPBE venc sub device driver + drivers/media/platform/davinci/vpbe_venc.c + drivers/media/platform/davinci/vpbe_venc.h + drivers/media/platform/davinci/vpbe_venc_regs.h + + VPBE osd driver + drivers/media/platform/davinci/vpbe_osd.c + drivers/media/platform/davinci/vpbe_osd.h + drivers/media/platform/davinci/vpbe_osd_regs.h + +Functional partitioning +----------------------- + +Consists of the following (in the same order as the list under file +partitioning): + + 1. V4L2 display driver + Implements creation of video2 and video3 device nodes and + provides v4l2 device interface to manage VID0 and VID1 layers. + + 2. Display controller + Loads up VENC, OSD and external encoders such as ths8200. It provides + a set of API calls to V4L2 drivers to set the output/standards + in the VENC or external sub devices. It also provides + a device object to access the services from OSD subdevice + using sub device ops. The connection of external encoders to VENC LCD + controller port is done at init time based on default output and standard + selection or at run time when application change the output through + V4L2 IOCTLs. + + When connected to an external encoder, vpbe controller is also responsible + for setting up the interface between VENC and external encoders based on + board specific settings (specified in board-xxx-evm.c). This allows + interfacing external encoders such as ths8200. The setup_if_config() + is implemented for this as well as configure_venc() (part of the next patch) + API to set timings in VENC for a specific display resolution. As of this + patch series, the interconnection and enabling and setting of the external + encoders is not present, and would be a part of the next patch series. + + 3. VENC subdevice module + Responsible for setting outputs provided through internal DACs and also + setting timings at LCD controller port when external encoders are connected + at the port or LCD panel timings required. When external encoder/LCD panel + is connected, the timings for a specific standard/preset is retrieved from + the board specific table and the values are used to set the timings in + venc using non-standard timing mode. + + Support LCD Panel displays using the VENC. For example to support a Logic + PD display, it requires setting up the LCD controller port with a set of + timings for the resolution supported and setting the dot clock. So we could + add the available outputs as a board specific entry (i.e add the "LogicPD" + output name to board-xxx-evm.c). A table of timings for various LCDs + supported can be maintained in the board specific setup file to support + various LCD displays.As of this patch a basic driver is present, and this + support for external encoders and displays forms a part of the next + patch series. + + 4. OSD module + OSD module implements all OSD layer management and hardware specific + features. The VPBE module interacts with the OSD for enabling and + disabling appropriate features of the OSD. + +Current status +-------------- + +A fully functional working version of the V4L2 driver is available. This +driver has been tested with NTSC and PAL standards and buffer streaming. + +To be done +---------- + +vpbe display controller + - Add support for external encoders. + - add support for selecting external encoder as default at probe time. + +vpbe venc sub device + - add timings for supporting ths8200 + - add support for LogicPD LCD. + +FB drivers + - Add support for fbdev drivers.- Ready and part of subsequent patches. diff --git a/Documentation/media/v4l-drivers/em28xx-cardlist.rst b/Documentation/media/v4l-drivers/em28xx-cardlist.rst new file mode 100644 index 000000000..dfe882ca9 --- /dev/null +++ b/Documentation/media/v4l-drivers/em28xx-cardlist.rst @@ -0,0 +1,426 @@ +EM28xx cards list +================= + +.. tabularcolumns:: |p{1.4cm}|p{10.0cm}|p{1.9cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 12 3 16 + :stub-columns: 0 + + * - Card number + - Card name + - Empia Chip + - USB IDs + * - 0 + - Unknown EM2800 video grabber + - em2800 + - eb1a:2800 + * - 1 + - Unknown EM2750/28xx video grabber + - em2820 or em2840 + - eb1a:2710, eb1a:2820, eb1a:2821, eb1a:2860, eb1a:2861, eb1a:2862, eb1a:2863, eb1a:2870, eb1a:2881, eb1a:2883, eb1a:2868, eb1a:2875 + * - 2 + - Terratec Cinergy 250 USB + - em2820 or em2840 + - 0ccd:0036 + * - 3 + - Pinnacle PCTV USB 2 + - em2820 or em2840 + - 2304:0208 + * - 4 + - Hauppauge WinTV USB 2 + - em2820 or em2840 + - 2040:4200, 2040:4201 + * - 5 + - MSI VOX USB 2.0 + - em2820 or em2840 + - + * - 6 + - Terratec Cinergy 200 USB + - em2800 + - + * - 7 + - Leadtek Winfast USB II + - em2800 + - 0413:6023 + * - 8 + - Kworld USB2800 + - em2800 + - + * - 9 + - Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U + - em2820 or em2840 + - 1b80:e302, 1b80:e304, 2304:0207, 2304:021a, 093b:a003 + * - 10 + - Hauppauge WinTV HVR 900 + - em2880 + - 2040:6500 + * - 11 + - Terratec Hybrid XS + - em2880 + - + * - 12 + - Kworld PVR TV 2800 RF + - em2820 or em2840 + - + * - 13 + - Terratec Prodigy XS + - em2880 + - + * - 14 + - SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 + - em2820 or em2840 + - + * - 15 + - V-Gear PocketTV + - em2800 + - + * - 16 + - Hauppauge WinTV HVR 950 + - em2883 + - 2040:6513, 2040:6517, 2040:651b + * - 17 + - Pinnacle PCTV HD Pro Stick + - em2880 + - 2304:0227 + * - 18 + - Hauppauge WinTV HVR 900 (R2) + - em2880 + - 2040:6502 + * - 19 + - EM2860/SAA711X Reference Design + - em2860 + - + * - 20 + - AMD ATI TV Wonder HD 600 + - em2880 + - 0438:b002 + * - 21 + - eMPIA Technology, Inc. GrabBeeX+ Video Encoder + - em2800 + - eb1a:2801 + * - 22 + - EM2710/EM2750/EM2751 webcam grabber + - em2750 + - eb1a:2750, eb1a:2751 + * - 23 + - Huaqi DLCW-130 + - em2750 + - + * - 24 + - D-Link DUB-T210 TV Tuner + - em2820 or em2840 + - 2001:f112 + * - 25 + - Gadmei UTV310 + - em2820 or em2840 + - + * - 26 + - Hercules Smart TV USB 2.0 + - em2820 or em2840 + - + * - 27 + - Pinnacle PCTV USB 2 (Philips FM1216ME) + - em2820 or em2840 + - + * - 28 + - Leadtek Winfast USB II Deluxe + - em2820 or em2840 + - + * - 29 + - EM2860/TVP5150 Reference Design + - em2860 + - eb1a:5051 + * - 30 + - Videology 20K14XUSB USB2.0 + - em2820 or em2840 + - + * - 31 + - Usbgear VD204v9 + - em2821 + - + * - 32 + - Supercomp USB 2.0 TV + - em2821 + - + * - 33 + - Elgato Video Capture + - em2860 + - 0fd9:0033 + * - 34 + - Terratec Cinergy A Hybrid XS + - em2860 + - 0ccd:004f + * - 35 + - Typhoon DVD Maker + - em2860 + - + * - 36 + - NetGMBH Cam + - em2860 + - + * - 37 + - Gadmei UTV330 + - em2860 + - eb1a:50a6 + * - 38 + - Yakumo MovieMixer + - em2861 + - + * - 39 + - KWorld PVRTV 300U + - em2861 + - eb1a:e300 + * - 40 + - Plextor ConvertX PX-TV100U + - em2861 + - 093b:a005 + * - 41 + - Kworld 350 U DVB-T + - em2870 + - eb1a:e350 + * - 42 + - Kworld 355 U DVB-T + - em2870 + - eb1a:e355, eb1a:e357, eb1a:e359 + * - 43 + - Terratec Cinergy T XS + - em2870 + - + * - 44 + - Terratec Cinergy T XS (MT2060) + - em2870 + - 0ccd:0043 + * - 45 + - Pinnacle PCTV DVB-T + - em2870 + - + * - 46 + - Compro, VideoMate U3 + - em2870 + - 185b:2870 + * - 47 + - KWorld DVB-T 305U + - em2880 + - eb1a:e305 + * - 48 + - KWorld DVB-T 310U + - em2880 + - + * - 49 + - MSI DigiVox A/D + - em2880 + - eb1a:e310 + * - 50 + - MSI DigiVox A/D II + - em2880 + - eb1a:e320 + * - 51 + - Terratec Hybrid XS Secam + - em2880 + - 0ccd:004c + * - 52 + - DNT DA2 Hybrid + - em2881 + - + * - 53 + - Pinnacle Hybrid Pro + - em2881 + - + * - 54 + - Kworld VS-DVB-T 323UR + - em2882 + - eb1a:e323 + * - 55 + - Terratec Cinnergy Hybrid T USB XS (em2882) + - em2882 + - 0ccd:005e, 0ccd:0042 + * - 56 + - Pinnacle Hybrid Pro (330e) + - em2882 + - 2304:0226 + * - 57 + - Kworld PlusTV HD Hybrid 330 + - em2883 + - eb1a:a316 + * - 58 + - Compro VideoMate ForYou/Stereo + - em2820 or em2840 + - 185b:2041 + * - 59 + - Pinnacle PCTV HD Mini + - em2874 + - 2304:023f + * - 60 + - Hauppauge WinTV HVR 850 + - em2883 + - 2040:651f + * - 61 + - Pixelview PlayTV Box 4 USB 2.0 + - em2820 or em2840 + - + * - 62 + - Gadmei TVR200 + - em2820 or em2840 + - + * - 63 + - Kaiomy TVnPC U2 + - em2860 + - eb1a:e303 + * - 64 + - Easy Cap Capture DC-60 + - em2860 + - 1b80:e309 + * - 65 + - IO-DATA GV-MVP/SZ + - em2820 or em2840 + - 04bb:0515 + * - 66 + - Empire dual TV + - em2880 + - + * - 67 + - Terratec Grabby + - em2860 + - 0ccd:0096, 0ccd:10AF + * - 68 + - Terratec AV350 + - em2860 + - 0ccd:0084 + * - 69 + - KWorld ATSC 315U HDTV TV Box + - em2882 + - eb1a:a313 + * - 70 + - Evga inDtube + - em2882 + - + * - 71 + - Silvercrest Webcam 1.3mpix + - em2820 or em2840 + - + * - 72 + - Gadmei UTV330+ + - em2861 + - + * - 73 + - Reddo DVB-C USB TV Box + - em2870 + - + * - 74 + - Actionmaster/LinXcel/Digitus VC211A + - em2800 + - + * - 75 + - Dikom DK300 + - em2882 + - + * - 76 + - KWorld PlusTV 340U or UB435-Q (ATSC) + - em2870 + - 1b80:a340 + * - 77 + - EM2874 Leadership ISDBT + - em2874 + - + * - 78 + - PCTV nanoStick T2 290e + - em28174 + - 2013:024f + * - 79 + - Terratec Cinergy H5 + - em2884 + - eb1a:2885, 0ccd:10a2, 0ccd:10ad, 0ccd:10b6 + * - 80 + - PCTV DVB-S2 Stick (460e) + - em28174 + - 2013:024c + * - 81 + - Hauppauge WinTV HVR 930C + - em2884 + - 2040:1605 + * - 82 + - Terratec Cinergy HTC Stick + - em2884 + - 0ccd:00b2 + * - 83 + - Honestech Vidbox NW03 + - em2860 + - eb1a:5006 + * - 84 + - MaxMedia UB425-TC + - em2874 + - 1b80:e425 + * - 85 + - PCTV QuatroStick (510e) + - em2884 + - 2304:0242 + * - 86 + - PCTV QuatroStick nano (520e) + - em2884 + - 2013:0251 + * - 87 + - Terratec Cinergy HTC USB XS + - em2884 + - 0ccd:008e, 0ccd:00ac + * - 88 + - C3 Tech Digital Duo HDTV/SDTV USB + - em2884 + - 1b80:e755 + * - 89 + - Delock 61959 + - em2874 + - 1b80:e1cc + * - 90 + - KWorld USB ATSC TV Stick UB435-Q V2 + - em2874 + - 1b80:e346 + * - 91 + - SpeedLink Vicious And Devine Laplace webcam + - em2765 + - 1ae7:9003, 1ae7:9004 + * - 92 + - PCTV DVB-S2 Stick (461e) + - em28178 + - 2013:0258 + * - 93 + - KWorld USB ATSC TV Stick UB435-Q V3 + - em2874 + - 1b80:e34c + * - 94 + - PCTV tripleStick (292e) + - em28178 + - 2013:025f, 2013:0264, 2040:0264, 2040:8264, 2040:8268, 2040:8268 + * - 95 + - Leadtek VC100 + - em2861 + - 0413:6f07 + * - 96 + - Terratec Cinergy T2 Stick HD + - em28178 + - eb1a:8179 + * - 97 + - Elgato EyeTV Hybrid 2008 INT + - em2884 + - 0fd9:0018 + * - 98 + - PLEX PX-BCUD + - em28178 + - 3275:0085 + * - 99 + - Hauppauge WinTV-dualHD DVB + - em28174 + - 2040:0265, 2040:8265 + * - 100 + - Hauppauge WinTV-dualHD 01595 ATSC/QAM + - em28174 + - 2040:026d, 2040:826d + * - 101 + - Terratec Cinergy H6 rev. 2 + - em2884 + - 0ccd:10b2 + * - 102 + - :ZOLID HYBRID TV STICK + - em2882 + - diff --git a/Documentation/media/v4l-drivers/fimc.rst b/Documentation/media/v4l-drivers/fimc.rst new file mode 100644 index 000000000..3adc19bcf --- /dev/null +++ b/Documentation/media/v4l-drivers/fimc.rst @@ -0,0 +1,169 @@ +.. include:: <isonum.txt> + +The Samsung S5P/EXYNOS4 FIMC driver +=================================== + +Copyright |copy| 2012 - 2013 Samsung Electronics Co., Ltd. + +The FIMC (Fully Interactive Mobile Camera) device available in Samsung +SoC Application Processors is an integrated camera host interface, color +space converter, image resizer and rotator. It's also capable of capturing +data from LCD controller (FIMD) through the SoC internal writeback data +path. There are multiple FIMC instances in the SoCs (up to 4), having +slightly different capabilities, like pixel alignment constraints, rotator +availability, LCD writeback support, etc. The driver is located at +drivers/media/platform/exynos4-is directory. + +Supported SoCs +-------------- + +S5PC100 (mem-to-mem only), S5PV210, EXYNOS4210 + +Supported features +------------------ + +- camera parallel interface capture (ITU-R.BT601/565); +- camera serial interface capture (MIPI-CSI2); +- memory-to-memory processing (color space conversion, scaling, mirror + and rotation); +- dynamic pipeline re-configuration at runtime (re-attachment of any FIMC + instance to any parallel video input or any MIPI-CSI front-end); +- runtime PM and system wide suspend/resume + +Not currently supported +----------------------- + +- LCD writeback input +- per frame clock gating (mem-to-mem) + +Files partitioning +------------------ + +- media device driver + drivers/media/platform/exynos4-is/media-dev.[ch] + +- camera capture video device driver + drivers/media/platform/exynos4-is/fimc-capture.c + +- MIPI-CSI2 receiver subdev + drivers/media/platform/exynos4-is/mipi-csis.[ch] + +- video post-processor (mem-to-mem) + drivers/media/platform/exynos4-is/fimc-core.c + +- common files + drivers/media/platform/exynos4-is/fimc-core.h + drivers/media/platform/exynos4-is/fimc-reg.h + drivers/media/platform/exynos4-is/regs-fimc.h + +User space interfaces +--------------------- + +Media device interface +~~~~~~~~~~~~~~~~~~~~~~ + +The driver supports Media Controller API as defined at :ref:`media_controller`. +The media device driver name is "SAMSUNG S5P FIMC". + +The purpose of this interface is to allow changing assignment of FIMC instances +to the SoC peripheral camera input at runtime and optionally to control internal +connections of the MIPI-CSIS device(s) to the FIMC entities. + +The media device interface allows to configure the SoC for capturing image +data from the sensor through more than one FIMC instance (e.g. for simultaneous +viewfinder and still capture setup). +Reconfiguration is done by enabling/disabling media links created by the driver +during initialization. The internal device topology can be easily discovered +through media entity and links enumeration. + +Memory-to-memory video node +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +V4L2 memory-to-memory interface at /dev/video? device node. This is standalone +video device, it has no media pads. However please note the mem-to-mem and +capture video node operation on same FIMC instance is not allowed. The driver +detects such cases but the applications should prevent them to avoid an +undefined behaviour. + +Capture video node +~~~~~~~~~~~~~~~~~~ + +The driver supports V4L2 Video Capture Interface as defined at +:ref:`devices`. + +At the capture and mem-to-mem video nodes only the multi-planar API is +supported. For more details see: :ref:`planar-apis`. + +Camera capture subdevs +~~~~~~~~~~~~~~~~~~~~~~ + +Each FIMC instance exports a sub-device node (/dev/v4l-subdev?), a sub-device +node is also created per each available and enabled at the platform level +MIPI-CSI receiver device (currently up to two). + +sysfs +~~~~~ + +In order to enable more precise camera pipeline control through the sub-device +API the driver creates a sysfs entry associated with "s5p-fimc-md" platform +device. The entry path is: /sys/platform/devices/s5p-fimc-md/subdev_conf_mode. + +In typical use case there could be a following capture pipeline configuration: +sensor subdev -> mipi-csi subdev -> fimc subdev -> video node + +When we configure these devices through sub-device API at user space, the +configuration flow must be from left to right, and the video node is +configured as last one. +When we don't use sub-device user space API the whole configuration of all +devices belonging to the pipeline is done at the video node driver. +The sysfs entry allows to instruct the capture node driver not to configure +the sub-devices (format, crop), to avoid resetting the subdevs' configuration +when the last configuration steps at the video node is performed. + +For full sub-device control support (subdevs configured at user space before +starting streaming): + +.. code-block:: none + + # echo "sub-dev" > /sys/platform/devices/s5p-fimc-md/subdev_conf_mode + +For V4L2 video node control only (subdevs configured internally by the host +driver): + +.. code-block:: none + + # echo "vid-dev" > /sys/platform/devices/s5p-fimc-md/subdev_conf_mode + +This is a default option. + +5. Device mapping to video and subdev device nodes +-------------------------------------------------- + +There are associated two video device nodes with each device instance in +hardware - video capture and mem-to-mem and additionally a subdev node for +more precise FIMC capture subsystem control. In addition a separate v4l2 +sub-device node is created per each MIPI-CSIS device. + +How to find out which /dev/video? or /dev/v4l-subdev? is assigned to which +device? + +You can either grep through the kernel log to find relevant information, i.e. + +.. code-block:: none + + # dmesg | grep -i fimc + +(note that udev, if present, might still have rearranged the video nodes), + +or retrieve the information from /dev/media? with help of the media-ctl tool: + +.. code-block:: none + + # media-ctl -p + +7. Build +-------- + +If the driver is built as a loadable kernel module (CONFIG_VIDEO_SAMSUNG_S5P_FIMC=m) +two modules are created (in addition to the core v4l2 modules): s5p-fimc.ko and +optional s5p-csis.ko (MIPI-CSI receiver subdev). diff --git a/Documentation/media/v4l-drivers/fourcc.rst b/Documentation/media/v4l-drivers/fourcc.rst new file mode 100644 index 000000000..9c82106e8 --- /dev/null +++ b/Documentation/media/v4l-drivers/fourcc.rst @@ -0,0 +1,30 @@ +Guidelines for Video4Linux pixel format 4CCs +============================================ + +Guidelines for Video4Linux 4CC codes defined using v4l2_fourcc() are +specified in this document. First of the characters defines the nature of +the pixel format, compression and colour space. The interpretation of the +other three characters depends on the first one. + +Existing 4CCs may not obey these guidelines. + +Raw bayer +--------- + +The following first characters are used by raw bayer formats: + +- B: raw bayer, uncompressed +- b: raw bayer, DPCM compressed +- a: A-law compressed +- u: u-law compressed + +2nd character: pixel order + +- B: BGGR +- G: GBRG +- g: GRBG +- R: RGGB + +3rd character: uncompressed bits-per-pixel 0--9, A-- + +4th character: compressed bits-per-pixel 0--9, A-- diff --git a/Documentation/media/v4l-drivers/gspca-cardlist.rst b/Documentation/media/v4l-drivers/gspca-cardlist.rst new file mode 100644 index 000000000..e18d87e80 --- /dev/null +++ b/Documentation/media/v4l-drivers/gspca-cardlist.rst @@ -0,0 +1,449 @@ +The gspca cards list +==================== + +The modules for the gspca webcam drivers are: + +- gspca_main: main driver +- gspca\_\ *driver*: subdriver module with *driver* as follows + +========= ========= =================================================================== +*driver* vend:prod Device +========= ========= =================================================================== +spca501 0000:0000 MystFromOri Unknown Camera +spca508 0130:0130 Clone Digital Webcam 11043 +se401 03e8:0004 Endpoints/AoxSE401 +zc3xx 03f0:1b07 HP Premium Starter Cam +m5602 0402:5602 ALi Video Camera Controller +spca501 040a:0002 Kodak DVC-325 +spca500 040a:0300 Kodak EZ200 +zc3xx 041e:041e Creative WebCam Live! +ov519 041e:4003 Video Blaster WebCam Go Plus +stv0680 041e:4007 Go Mini +spca500 041e:400a Creative PC-CAM 300 +sunplus 041e:400b Creative PC-CAM 600 +sunplus 041e:4012 PC-Cam350 +sunplus 041e:4013 Creative Pccam750 +zc3xx 041e:4017 Creative Webcam Mobile PD1090 +spca508 041e:4018 Creative Webcam Vista (PD1100) +spca561 041e:401a Creative Webcam Vista (PD1100) +zc3xx 041e:401c Creative NX +spca505 041e:401d Creative Webcam NX ULTRA +zc3xx 041e:401e Creative Nx Pro +zc3xx 041e:401f Creative Webcam Notebook PD1171 +zc3xx 041e:4022 Webcam NX Pro +pac207 041e:4028 Creative Webcam Vista Plus +zc3xx 041e:4029 Creative WebCam Vista Pro +zc3xx 041e:4034 Creative Instant P0620 +zc3xx 041e:4035 Creative Instant P0620D +zc3xx 041e:4036 Creative Live ! +sq930x 041e:4038 Creative Joy-IT +zc3xx 041e:403a Creative Nx Pro 2 +spca561 041e:403b Creative Webcam Vista (VF0010) +sq930x 041e:403c Creative Live! Ultra +sq930x 041e:403d Creative Live! Ultra for Notebooks +sq930x 041e:4041 Creative Live! Motion +zc3xx 041e:4051 Creative Live!Cam Notebook Pro (VF0250) +ov519 041e:4052 Creative Live! VISTA IM +zc3xx 041e:4053 Creative Live!Cam Video IM +vc032x 041e:405b Creative Live! Cam Notebook Ultra (VC0130) +ov519 041e:405f Creative Live! VISTA VF0330 +ov519 041e:4060 Creative Live! VISTA VF0350 +ov519 041e:4061 Creative Live! VISTA VF0400 +ov519 041e:4064 Creative Live! VISTA VF0420 +ov519 041e:4067 Creative Live! Cam Video IM (VF0350) +ov519 041e:4068 Creative Live! VISTA VF0470 +sn9c2028 0458:7003 GeniusVideocam Live v2 +spca561 0458:7004 Genius VideoCAM Express V2 +sn9c2028 0458:7005 Genius Smart 300, version 2 +sunplus 0458:7006 Genius Dsc 1.3 Smart +zc3xx 0458:7007 Genius VideoCam V2 +zc3xx 0458:700c Genius VideoCam V3 +zc3xx 0458:700f Genius VideoCam Web V2 +sonixj 0458:7025 Genius Eye 311Q +sn9c20x 0458:7029 Genius Look 320s +sonixj 0458:702e Genius Slim 310 NB +sn9c20x 0458:7045 Genius Look 1320 V2 +sn9c20x 0458:704a Genius Slim 1320 +sn9c20x 0458:704c Genius i-Look 1321 +sn9c20x 045e:00f4 LifeCam VX-6000 (SN9C20x + OV9650) +sonixj 045e:00f5 MicroSoft VX3000 +sonixj 045e:00f7 MicroSoft VX1000 +ov519 045e:028c Micro$oft xbox cam +kinect 045e:02ae Xbox NUI Camera +kinect 045e:02bf Kinect for Windows NUI Camera +spca561 0461:0815 Micro Innovations IC200 Webcam +sunplus 0461:0821 Fujifilm MV-1 +zc3xx 0461:0a00 MicroInnovation WebCam320 +stv06xx 046D:08F0 QuickCamMessenger +stv06xx 046D:08F5 QuickCamCommunicate +stv06xx 046D:08F6 QuickCamMessenger (new) +stv06xx 046d:0840 QuickCamExpress +stv06xx 046d:0850 LEGOcam / QuickCam Web +stv06xx 046d:0870 DexxaWebCam USB +spca500 046d:0890 Logitech QuickCam traveler +vc032x 046d:0892 Logitech Orbicam +vc032x 046d:0896 Logitech Orbicam +vc032x 046d:0897 Logitech QuickCam for Dell notebooks +zc3xx 046d:089d Logitech QuickCam E2500 +zc3xx 046d:08a0 Logitech QC IM +zc3xx 046d:08a1 Logitech QC IM 0x08A1 +sound +zc3xx 046d:08a2 Labtec Webcam Pro +zc3xx 046d:08a3 Logitech QC Chat +zc3xx 046d:08a6 Logitech QCim +zc3xx 046d:08a7 Logitech QuickCam Image +zc3xx 046d:08a9 Logitech Notebook Deluxe +zc3xx 046d:08aa Labtec Webcam Notebook +zc3xx 046d:08ac Logitech QuickCam Cool +zc3xx 046d:08ad Logitech QCCommunicate STX +zc3xx 046d:08ae Logitech QuickCam for Notebooks +zc3xx 046d:08af Logitech QuickCam Cool +zc3xx 046d:08b9 Logitech QuickCam Express +zc3xx 046d:08d7 Logitech QCam STX +zc3xx 046d:08d8 Logitech Notebook Deluxe +zc3xx 046d:08d9 Logitech QuickCam IM/Connect +zc3xx 046d:08da Logitech QuickCam Messenger +zc3xx 046d:08dd Logitech QuickCam for Notebooks +spca500 046d:0900 Logitech Inc. ClickSmart 310 +spca500 046d:0901 Logitech Inc. ClickSmart 510 +sunplus 046d:0905 Logitech ClickSmart 820 +tv8532 046d:0920 Logitech QuickCam Express +tv8532 046d:0921 Labtec Webcam +spca561 046d:0928 Logitech QC Express Etch2 +spca561 046d:0929 Labtec Webcam Elch2 +spca561 046d:092a Logitech QC for Notebook +spca561 046d:092b Labtec Webcam Plus +spca561 046d:092c Logitech QC chat Elch2 +spca561 046d:092d Logitech QC Elch2 +spca561 046d:092e Logitech QC Elch2 +spca561 046d:092f Logitech QuickCam Express Plus +sunplus 046d:0960 Logitech ClickSmart 420 +nw80x 046d:d001 Logitech QuickCam Pro (dark focus ring) +se401 0471:030b PhilipsPCVC665K +sunplus 0471:0322 Philips DMVC1300K +zc3xx 0471:0325 Philips SPC 200 NC +zc3xx 0471:0326 Philips SPC 300 NC +sonixj 0471:0327 Philips SPC 600 NC +sonixj 0471:0328 Philips SPC 700 NC +zc3xx 0471:032d Philips SPC 210 NC +zc3xx 0471:032e Philips SPC 315 NC +sonixj 0471:0330 Philips SPC 710 NC +se401 047d:5001 Kensington67014 +se401 047d:5002 Kensington6701(5/7) +se401 047d:5003 Kensington67016 +spca501 0497:c001 Smile International +sunplus 04a5:3003 Benq DC 1300 +sunplus 04a5:3008 Benq DC 1500 +sunplus 04a5:300a Benq DC 3410 +spca500 04a5:300c Benq DC 1016 +benq 04a5:3035 Benq DC E300 +vicam 04c1:009d HomeConnect Webcam [vicam] +konica 04c8:0720 IntelYC 76 +finepix 04cb:0104 Fujifilm FinePix 4800 +finepix 04cb:0109 Fujifilm FinePix A202 +finepix 04cb:010b Fujifilm FinePix A203 +finepix 04cb:010f Fujifilm FinePix A204 +finepix 04cb:0111 Fujifilm FinePix A205 +finepix 04cb:0113 Fujifilm FinePix A210 +finepix 04cb:0115 Fujifilm FinePix A303 +finepix 04cb:0117 Fujifilm FinePix A310 +finepix 04cb:0119 Fujifilm FinePix F401 +finepix 04cb:011b Fujifilm FinePix F402 +finepix 04cb:011d Fujifilm FinePix F410 +finepix 04cb:0121 Fujifilm FinePix F601 +finepix 04cb:0123 Fujifilm FinePix F700 +finepix 04cb:0125 Fujifilm FinePix M603 +finepix 04cb:0127 Fujifilm FinePix S300 +finepix 04cb:0129 Fujifilm FinePix S304 +finepix 04cb:012b Fujifilm FinePix S500 +finepix 04cb:012d Fujifilm FinePix S602 +finepix 04cb:012f Fujifilm FinePix S700 +finepix 04cb:0131 Fujifilm FinePix unknown model +finepix 04cb:013b Fujifilm FinePix unknown model +finepix 04cb:013d Fujifilm FinePix unknown model +finepix 04cb:013f Fujifilm FinePix F420 +sunplus 04f1:1001 JVC GC A50 +spca561 04fc:0561 Flexcam 100 +spca1528 04fc:1528 Sunplus MD80 clone +sunplus 04fc:500c Sunplus CA500C +sunplus 04fc:504a Aiptek Mini PenCam 1.3 +sunplus 04fc:504b Maxell MaxPocket LE 1.3 +sunplus 04fc:5330 Digitrex 2110 +sunplus 04fc:5360 Sunplus Generic +spca500 04fc:7333 PalmPixDC85 +sunplus 04fc:ffff Pure DigitalDakota +nw80x 0502:d001 DVC V6 +spca501 0506:00df 3Com HomeConnect Lite +sunplus 052b:1507 Megapixel 5 Pretec DC-1007 +sunplus 052b:1513 Megapix V4 +sunplus 052b:1803 MegaImage VI +nw80x 052b:d001 EZCam Pro p35u +tv8532 0545:808b Veo Stingray +tv8532 0545:8333 Veo Stingray +sunplus 0546:3155 Polaroid PDC3070 +sunplus 0546:3191 Polaroid Ion 80 +sunplus 0546:3273 Polaroid PDC2030 +touptek 0547:6801 TTUCMOS08000KPB, AS MU800 +dtcs033 0547:7303 Anchor Chips, Inc +ov519 054c:0154 Sonny toy4 +ov519 054c:0155 Sonny toy5 +cpia1 0553:0002 CPIA CPiA (version1) based cameras +stv0680 0553:0202 STV0680 Camera +zc3xx 055f:c005 Mustek Wcam300A +spca500 055f:c200 Mustek Gsmart 300 +sunplus 055f:c211 Kowa Bs888e Microcamera +spca500 055f:c220 Gsmart Mini +sunplus 055f:c230 Mustek Digicam 330K +sunplus 055f:c232 Mustek MDC3500 +sunplus 055f:c360 Mustek DV4000 Mpeg4 +sunplus 055f:c420 Mustek gSmart Mini 2 +sunplus 055f:c430 Mustek Gsmart LCD 2 +sunplus 055f:c440 Mustek DV 3000 +sunplus 055f:c520 Mustek gSmart Mini 3 +sunplus 055f:c530 Mustek Gsmart LCD 3 +sunplus 055f:c540 Gsmart D30 +sunplus 055f:c630 Mustek MDC4000 +sunplus 055f:c650 Mustek MDC5500Z +nw80x 055f:d001 Mustek Wcam 300 mini +zc3xx 055f:d003 Mustek WCam300A +zc3xx 055f:d004 Mustek WCam300 AN +conex 0572:0041 Creative Notebook cx11646 +ov519 05a9:0511 Video Blaster WebCam 3/WebCam Plus, D-Link USB Digital Video Camera +ov519 05a9:0518 Creative WebCam +ov519 05a9:0519 OV519 Microphone +ov519 05a9:0530 OmniVision +ov534_9 05a9:1550 OmniVision VEHO Filmscanner +ov519 05a9:2800 OmniVision SuperCAM +ov519 05a9:4519 Webcam Classic +ov534_9 05a9:8065 OmniVision test kit ov538+ov9712 +ov519 05a9:8519 OmniVision +ov519 05a9:a511 D-Link USB Digital Video Camera +ov519 05a9:a518 D-Link DSB-C310 Webcam +sunplus 05da:1018 Digital Dream Enigma 1.3 +stk014 05e1:0893 Syntek DV4000 +gl860 05e3:0503 Genesys Logic PC Camera +gl860 05e3:f191 Genesys Logic PC Camera +vicam 0602:1001 ViCam Webcam +spca561 060b:a001 Maxell Compact Pc PM3 +zc3xx 0698:2003 CTX M730V built in +topro 06a2:0003 TP6800 PC Camera, CmoX CX0342 webcam +topro 06a2:6810 Creative Qmax +nw80x 06a5:0000 Typhoon Webcam 100 USB +nw80x 06a5:d001 Divio based webcams +nw80x 06a5:d800 Divio Chicony TwinkleCam, Trust SpaceCam +spca500 06bd:0404 Agfa CL20 +spca500 06be:0800 Optimedia +nw80x 06be:d001 EZCam Pro p35u +sunplus 06d6:0031 Trust 610 LCD PowerC@m Zoom +sunplus 06d6:0041 Aashima Technology B.V. +spca506 06e1:a190 ADS Instant VCD +ov534 06f8:3002 Hercules Blog Webcam +ov534_9 06f8:3003 Hercules Dualpix HD Weblog +sonixj 06f8:3004 Hercules Classic Silver +sonixj 06f8:3008 Hercules Deluxe Optical Glass +pac7302 06f8:3009 Hercules Classic Link +pac7302 06f8:301b Hercules Link +nw80x 0728:d001 AVerMedia Camguard +spca508 0733:0110 ViewQuest VQ110 +spca501 0733:0401 Intel Create and Share +spca501 0733:0402 ViewQuest M318B +spca505 0733:0430 Intel PC Camera Pro +sunplus 0733:1311 Digital Dream Epsilon 1.3 +sunplus 0733:1314 Mercury 2.1MEG Deluxe Classic Cam +sunplus 0733:2211 Jenoptik jdc 21 LCD +sunplus 0733:2221 Mercury Digital Pro 3.1p +sunplus 0733:3261 Concord 3045 spca536a +sunplus 0733:3281 Cyberpix S550V +spca506 0734:043b 3DeMon USB Capture aka +cpia1 0813:0001 QX3 camera +ov519 0813:0002 Dual Mode USB Camera Plus +spca500 084d:0003 D-Link DSC-350 +spca500 08ca:0103 Aiptek PocketDV +sunplus 08ca:0104 Aiptek PocketDVII 1.3 +sunplus 08ca:0106 Aiptek Pocket DV3100+ +mr97310a 08ca:0110 Trust Spyc@m 100 +mr97310a 08ca:0111 Aiptek PenCam VGA+ +sunplus 08ca:2008 Aiptek Mini PenCam 2 M +sunplus 08ca:2010 Aiptek PocketCam 3M +sunplus 08ca:2016 Aiptek PocketCam 2 Mega +sunplus 08ca:2018 Aiptek Pencam SD 2M +sunplus 08ca:2020 Aiptek Slim 3000F +sunplus 08ca:2022 Aiptek Slim 3200 +sunplus 08ca:2024 Aiptek DV3500 Mpeg4 +sunplus 08ca:2028 Aiptek PocketCam4M +sunplus 08ca:2040 Aiptek PocketDV4100M +sunplus 08ca:2042 Aiptek PocketDV5100 +sunplus 08ca:2050 Medion MD 41437 +sunplus 08ca:2060 Aiptek PocketDV5300 +tv8532 0923:010f ICM532 cams +mr97310a 093a:010e All known CIF cams with this ID +mr97310a 093a:010f All known VGA cams with this ID +mars 093a:050f Mars-Semi Pc-Camera +pac207 093a:2460 Qtec Webcam 100 +pac207 093a:2461 HP Webcam +pac207 093a:2463 Philips SPC 220 NC +pac207 093a:2464 Labtec Webcam 1200 +pac207 093a:2468 Webcam WB-1400T +pac207 093a:2470 Genius GF112 +pac207 093a:2471 Genius VideoCam ge111 +pac207 093a:2472 Genius VideoCam ge110 +pac207 093a:2474 Genius iLook 111 +pac207 093a:2476 Genius e-Messenger 112 +pac7311 093a:2600 PAC7311 Typhoon +pac7311 093a:2601 Philips SPC 610 NC +pac7311 093a:2603 Philips SPC 500 NC +pac7311 093a:2608 Trust WB-3300p +pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 +pac7311 093a:260f SnakeCam +pac7302 093a:2620 Apollo AC-905 +pac7302 093a:2621 PAC731x +pac7302 093a:2622 Genius Eye 312 +pac7302 093a:2623 Pixart Imaging, Inc. +pac7302 093a:2624 PAC7302 +pac7302 093a:2625 Genius iSlim 310 +pac7302 093a:2626 Labtec 2200 +pac7302 093a:2627 Genius FaceCam 300 +pac7302 093a:2628 Genius iLook 300 +pac7302 093a:2629 Genious iSlim 300 +pac7302 093a:262a Webcam 300k +pac7302 093a:262c Philips SPC 230 NC +jl2005bcd 0979:0227 Various brands, 19 known cameras supported +jeilinj 0979:0270 Sakar 57379 +jeilinj 0979:0280 Sportscam DV15, Sakar 57379 +zc3xx 0ac8:0301 Web Camera +zc3xx 0ac8:0302 Z-star Vimicro zc0302 +vc032x 0ac8:0321 Vimicro generic vc0321 +vc032x 0ac8:0323 Vimicro Vc0323 +vc032x 0ac8:0328 A4Tech PK-130MG +zc3xx 0ac8:301b Z-Star zc301b +zc3xx 0ac8:303b Vimicro 0x303b +zc3xx 0ac8:305b Z-star Vimicro zc0305b +zc3xx 0ac8:307b PC Camera (ZS0211) +vc032x 0ac8:c001 Sony embedded vimicro +vc032x 0ac8:c002 Sony embedded vimicro +vc032x 0ac8:c301 Samsung Q1 Ultra Premium +spca508 0af9:0010 Hama USB Sightcam 100 +spca508 0af9:0011 Hama USB Sightcam 100 +ov519 0b62:0059 iBOT2 Webcam +sonixb 0c45:6001 Genius VideoCAM NB +sonixb 0c45:6005 Microdia Sweex Mini Webcam +sonixb 0c45:6007 Sonix sn9c101 + Tas5110D +sonixb 0c45:6009 spcaCam@120 +sonixb 0c45:600d spcaCam@120 +sonixb 0c45:6011 Microdia PC Camera (SN9C102) +sonixb 0c45:6019 Generic Sonix OV7630 +sonixb 0c45:6024 Generic Sonix Tas5130c +sonixb 0c45:6025 Xcam Shanga +sonixb 0c45:6027 GeniusEye 310 +sonixb 0c45:6028 Sonix Btc Pc380 +sonixb 0c45:6029 spcaCam@150 +sonixb 0c45:602a Meade ETX-105EC Camera +sonixb 0c45:602c Generic Sonix OV7630 +sonixb 0c45:602d LIC-200 LG +sonixb 0c45:602e Genius VideoCam Messenger +sonixj 0c45:6040 Speed NVC 350K +sonixj 0c45:607c Sonix sn9c102p Hv7131R +sonixb 0c45:6083 VideoCAM Look +sonixb 0c45:608c VideoCAM Look +sonixb 0c45:608f PC Camera (SN9C103 + OV7630) +sonixb 0c45:60a8 VideoCAM Look +sonixb 0c45:60aa VideoCAM Look +sonixb 0c45:60af VideoCAM Look +sonixb 0c45:60b0 Genius VideoCam Look +sonixj 0c45:60c0 Sangha Sn535 +sonixj 0c45:60ce USB-PC-Camera-168 (TALK-5067) +sonixj 0c45:60ec SN9C105+MO4000 +sonixj 0c45:60fb Surfer NoName +sonixj 0c45:60fc LG-LIC300 +sonixj 0c45:60fe Microdia Audio +sonixj 0c45:6100 PC Camera (SN9C128) +sonixj 0c45:6102 PC Camera (SN9C128) +sonixj 0c45:610a PC Camera (SN9C128) +sonixj 0c45:610b PC Camera (SN9C128) +sonixj 0c45:610c PC Camera (SN9C128) +sonixj 0c45:610e PC Camera (SN9C128) +sonixj 0c45:6128 Microdia/Sonix SNP325 +sonixj 0c45:612a Avant Camera +sonixj 0c45:612b Speed-Link REFLECT2 +sonixj 0c45:612c Typhoon Rasy Cam 1.3MPix +sonixj 0c45:612e PC Camera (SN9C110) +sonixj 0c45:6130 Sonix Pccam +sonixj 0c45:6138 Sn9c120 Mo4000 +sonixj 0c45:613a Microdia Sonix PC Camera +sonixj 0c45:613b Surfer SN-206 +sonixj 0c45:613c Sonix Pccam168 +sonixj 0c45:613e PC Camera (SN9C120) +sonixj 0c45:6142 Hama PC-Webcam AC-150 +sonixj 0c45:6143 Sonix Pccam168 +sonixj 0c45:6148 Digitus DA-70811/ZSMC USB PC Camera ZS211/Microdia +sonixj 0c45:614a Frontech E-Ccam (JIL-2225) +sn9c20x 0c45:6240 PC Camera (SN9C201 + MT9M001) +sn9c20x 0c45:6242 PC Camera (SN9C201 + MT9M111) +sn9c20x 0c45:6248 PC Camera (SN9C201 + OV9655) +sn9c20x 0c45:624c PC Camera (SN9C201 + MT9M112) +sn9c20x 0c45:624e PC Camera (SN9C201 + SOI968) +sn9c20x 0c45:624f PC Camera (SN9C201 + OV9650) +sn9c20x 0c45:6251 PC Camera (SN9C201 + OV9650) +sn9c20x 0c45:6253 PC Camera (SN9C201 + OV9650) +sn9c20x 0c45:6260 PC Camera (SN9C201 + OV7670) +sn9c20x 0c45:6270 PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112) +sn9c20x 0c45:627b PC Camera (SN9C201 + OV7660) +sn9c20x 0c45:627c PC Camera (SN9C201 + HV7131R) +sn9c20x 0c45:627f PC Camera (SN9C201 + OV9650) +sn9c20x 0c45:6280 PC Camera (SN9C202 + MT9M001) +sn9c20x 0c45:6282 PC Camera (SN9C202 + MT9M111) +sn9c20x 0c45:6288 PC Camera (SN9C202 + OV9655) +sn9c20x 0c45:628c PC Camera (SN9C201 + MT9M112) +sn9c20x 0c45:628e PC Camera (SN9C202 + SOI968) +sn9c20x 0c45:628f PC Camera (SN9C202 + OV9650) +sn9c20x 0c45:62a0 PC Camera (SN9C202 + OV7670) +sn9c20x 0c45:62b0 PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112) +sn9c20x 0c45:62b3 PC Camera (SN9C202 + OV9655) +sn9c20x 0c45:62bb PC Camera (SN9C202 + OV7660) +sn9c20x 0c45:62bc PC Camera (SN9C202 + HV7131R) +sn9c2028 0c45:8001 Wild Planet Digital Spy Camera +sn9c2028 0c45:8003 Sakar #11199, #6637x, #67480 keychain cams +sn9c2028 0c45:8008 Mini-Shotz ms-350 +sn9c2028 0c45:800a Vivitar Vivicam 3350B +sunplus 0d64:0303 Sunplus FashionCam DXG +ov519 0e96:c001 TRUST 380 USB2 SPACEC@M +etoms 102c:6151 Qcam Sangha CIF +etoms 102c:6251 Qcam xxxxxx VGA +ov519 1046:9967 W9967CF/W9968CF WebCam IC, Video Blaster WebCam Go +zc3xx 10fd:0128 Typhoon Webshot II USB 300k 0x0128 +spca561 10fd:7e50 FlyCam Usb 100 +zc3xx 10fd:804d Typhoon Webshot II Webcam [zc0301] +zc3xx 10fd:8050 Typhoon Webshot II USB 300k +ov534 1415:2000 Sony HD Eye for PS3 (SLEH 00201) +pac207 145f:013a Trust WB-1300N +pac7302 145f:013c Trust +sn9c20x 145f:013d Trust WB-3600R +vc032x 15b8:6001 HP 2.0 Megapixel +vc032x 15b8:6002 HP 2.0 Megapixel rz406aa +stk1135 174f:6a31 ASUSlaptop, MT9M112 sensor +spca501 1776:501c Arowana 300K CMOS Camera +t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops +vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC +pac7302 1ae7:2001 SpeedLinkSnappy Mic SL-6825-SBK +pac207 2001:f115 D-Link DSB-C120 +sq905c 2770:9050 Disney pix micro (CIF) +sq905c 2770:9051 Lego Bionicle +sq905c 2770:9052 Disney pix micro 2 (VGA) +sq905c 2770:905c All 11 known cameras with this ID +sq905 2770:9120 All 24 known cameras with this ID +sq905c 2770:913d All 4 known cameras with this ID +sq930x 2770:930b Sweex Motion Tracking / I-Tec iCam Tracer +sq930x 2770:930c Trust WB-3500T / NSG Robbie 2.0 +spca500 2899:012c Toptro Industrial +ov519 8020:ef04 ov519 +spca508 8086:0110 Intel Easy PC Camera +spca500 8086:0630 Intel Pocket PC Camera +spca506 99fa:8988 Grandtec V.cap +sn9c20x a168:0610 Dino-Lite Digital Microscope (SN9C201 + HV7131R) +sn9c20x a168:0611 Dino-Lite Digital Microscope (SN9C201 + HV7131R) +sn9c20x a168:0613 Dino-Lite Digital Microscope (SN9C201 + HV7131R) +sn9c20x a168:0614 Dino-Lite Digital Microscope (SN9C201 + MT9M111) +sn9c20x a168:0615 Dino-Lite Digital Microscope (SN9C201 + MT9M111) +sn9c20x a168:0617 Dino-Lite Digital Microscope (SN9C201 + MT9M111) +sn9c20x a168:0618 Dino-Lite Digital Microscope (SN9C201 + HV7131R) +spca561 abcd:cdee Petcam +========= ========= =================================================================== diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst new file mode 100644 index 000000000..65d3d15eb --- /dev/null +++ b/Documentation/media/v4l-drivers/imx.rst @@ -0,0 +1,617 @@ +i.MX Video Capture Driver +========================= + +Introduction +------------ + +The Freescale i.MX5/6 contains an Image Processing Unit (IPU), which +handles the flow of image frames to and from capture devices and +display devices. + +For image capture, the IPU contains the following internal subunits: + +- Image DMA Controller (IDMAC) +- Camera Serial Interface (CSI) +- Image Converter (IC) +- Sensor Multi-FIFO Controller (SMFC) +- Image Rotator (IRT) +- Video De-Interlacing or Combining Block (VDIC) + +The IDMAC is the DMA controller for transfer of image frames to and from +memory. Various dedicated DMA channels exist for both video capture and +display paths. During transfer, the IDMAC is also capable of vertical +image flip, 8x8 block transfer (see IRT description), pixel component +re-ordering (for example UYVY to YUYV) within the same colorspace, and +even packed <--> planar conversion. It can also perform a simple +de-interlacing by interleaving even and odd lines during transfer +(without motion compensation which requires the VDIC). + +The CSI is the backend capture unit that interfaces directly with +camera sensors over Parallel, BT.656/1120, and MIPI CSI-2 busses. + +The IC handles color-space conversion, resizing (downscaling and +upscaling), horizontal flip, and 90/270 degree rotation operations. + +There are three independent "tasks" within the IC that can carry out +conversions concurrently: pre-process encoding, pre-process viewfinder, +and post-processing. Within each task, conversions are split into three +sections: downsizing section, main section (upsizing, flip, colorspace +conversion, and graphics plane combining), and rotation section. + +The IPU time-shares the IC task operations. The time-slice granularity +is one burst of eight pixels in the downsizing section, one image line +in the main processing section, one image frame in the rotation section. + +The SMFC is composed of four independent FIFOs that each can transfer +captured frames from sensors directly to memory concurrently via four +IDMAC channels. + +The IRT carries out 90 and 270 degree image rotation operations. The +rotation operation is carried out on 8x8 pixel blocks at a time. This +operation is supported by the IDMAC which handles the 8x8 block transfer +along with block reordering, in coordination with vertical flip. + +The VDIC handles the conversion of interlaced video to progressive, with +support for different motion compensation modes (low, medium, and high +motion). The deinterlaced output frames from the VDIC can be sent to the +IC pre-process viewfinder task for further conversions. The VDIC also +contains a Combiner that combines two image planes, with alpha blending +and color keying. + +In addition to the IPU internal subunits, there are also two units +outside the IPU that are also involved in video capture on i.MX: + +- MIPI CSI-2 Receiver for camera sensors with the MIPI CSI-2 bus + interface. This is a Synopsys DesignWare core. +- Two video multiplexers for selecting among multiple sensor inputs + to send to a CSI. + +For more info, refer to the latest versions of the i.MX5/6 reference +manuals [#f1]_ and [#f2]_. + + +Features +-------- + +Some of the features of this driver include: + +- Many different pipelines can be configured via media controller API, + that correspond to the hardware video capture pipelines supported in + the i.MX. + +- Supports parallel, BT.565, and MIPI CSI-2 interfaces. + +- Concurrent independent streams, by configuring pipelines to multiple + video capture interfaces using independent entities. + +- Scaling, color-space conversion, horizontal and vertical flip, and + image rotation via IC task subdevs. + +- Many pixel formats supported (RGB, packed and planar YUV, partial + planar YUV). + +- The VDIC subdev supports motion compensated de-interlacing, with three + motion compensation modes: low, medium, and high motion. Pipelines are + defined that allow sending frames to the VDIC subdev directly from the + CSI. There is also support in the future for sending frames to the + VDIC from memory buffers via a output/mem2mem devices. + +- Includes a Frame Interval Monitor (FIM) that can correct vertical sync + problems with the ADV718x video decoders. + + +Entities +-------- + +imx6-mipi-csi2 +-------------- + +This is the MIPI CSI-2 receiver entity. It has one sink pad to receive +the MIPI CSI-2 stream (usually from a MIPI CSI-2 camera sensor). It has +four source pads, corresponding to the four MIPI CSI-2 demuxed virtual +channel outputs. Multiple source pads can be enabled to independently +stream from multiple virtual channels. + +This entity actually consists of two sub-blocks. One is the MIPI CSI-2 +core. This is a Synopsys Designware MIPI CSI-2 core. The other sub-block +is a "CSI-2 to IPU gasket". The gasket acts as a demultiplexer of the +four virtual channels streams, providing four separate parallel buses +containing each virtual channel that are routed to CSIs or video +multiplexers as described below. + +On i.MX6 solo/dual-lite, all four virtual channel buses are routed to +two video multiplexers. Both CSI0 and CSI1 can receive any virtual +channel, as selected by the video multiplexers. + +On i.MX6 Quad, virtual channel 0 is routed to IPU1-CSI0 (after selected +by a video mux), virtual channels 1 and 2 are hard-wired to IPU1-CSI1 +and IPU2-CSI0, respectively, and virtual channel 3 is routed to +IPU2-CSI1 (again selected by a video mux). + +ipuX_csiY_mux +------------- + +These are the video multiplexers. They have two or more sink pads to +select from either camera sensors with a parallel interface, or from +MIPI CSI-2 virtual channels from imx6-mipi-csi2 entity. They have a +single source pad that routes to a CSI (ipuX_csiY entities). + +On i.MX6 solo/dual-lite, there are two video mux entities. One sits +in front of IPU1-CSI0 to select between a parallel sensor and any of +the four MIPI CSI-2 virtual channels (a total of five sink pads). The +other mux sits in front of IPU1-CSI1, and again has five sink pads to +select between a parallel sensor and any of the four MIPI CSI-2 virtual +channels. + +On i.MX6 Quad, there are two video mux entities. One sits in front of +IPU1-CSI0 to select between a parallel sensor and MIPI CSI-2 virtual +channel 0 (two sink pads). The other mux sits in front of IPU2-CSI1 to +select between a parallel sensor and MIPI CSI-2 virtual channel 3 (two +sink pads). + +ipuX_csiY +--------- + +These are the CSI entities. They have a single sink pad receiving from +either a video mux or from a MIPI CSI-2 virtual channel as described +above. + +This entity has two source pads. The first source pad can link directly +to the ipuX_vdic entity or the ipuX_ic_prp entity, using hardware links +that require no IDMAC memory buffer transfer. + +When the direct source pad is routed to the ipuX_ic_prp entity, frames +from the CSI can be processed by one or both of the IC pre-processing +tasks. + +When the direct source pad is routed to the ipuX_vdic entity, the VDIC +will carry out motion-compensated de-interlace using "high motion" mode +(see description of ipuX_vdic entity). + +The second source pad sends video frames directly to memory buffers +via the SMFC and an IDMAC channel, bypassing IC pre-processing. This +source pad is routed to a capture device node, with a node name of the +format "ipuX_csiY capture". + +Note that since the IDMAC source pad makes use of an IDMAC channel, it +can do pixel reordering within the same colorspace. For example, the +sink pad can take UYVY2X8, but the IDMAC source pad can output YUYV2X8. +If the sink pad is receiving YUV, the output at the capture device can +also be converted to a planar YUV format such as YUV420. + +It will also perform simple de-interlace without motion compensation, +which is activated if the sink pad's field type is an interlaced type, +and the IDMAC source pad field type is set to none. + +This subdev can generate the following event when enabling the second +IDMAC source pad: + +- V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR + +The user application can subscribe to this event from the ipuX_csiY +subdev node. This event is generated by the Frame Interval Monitor +(see below for more on the FIM). + +Cropping in ipuX_csiY +--------------------- + +The CSI supports cropping the incoming raw sensor frames. This is +implemented in the ipuX_csiY entities at the sink pad, using the +crop selection subdev API. + +The CSI also supports fixed divide-by-two downscaling indepently in +width and height. This is implemented in the ipuX_csiY entities at +the sink pad, using the compose selection subdev API. + +The output rectangle at the ipuX_csiY source pad is the same as +the compose rectangle at the sink pad. So the source pad rectangle +cannot be negotiated, it must be set using the compose selection +API at sink pad (if /2 downscale is desired, otherwise source pad +rectangle is equal to incoming rectangle). + +To give an example of crop and /2 downscale, this will crop a +1280x960 input frame to 640x480, and then /2 downscale in both +dimensions to 320x240 (assumes ipu1_csi0 is linked to ipu1_csi0_mux): + +.. code-block:: none + + media-ctl -V "'ipu1_csi0_mux':2[fmt:UYVY2X8/1280x960]" + media-ctl -V "'ipu1_csi0':0[crop:(0,0)/640x480]" + media-ctl -V "'ipu1_csi0':0[compose:(0,0)/320x240]" + +Frame Skipping in ipuX_csiY +--------------------------- + +The CSI supports frame rate decimation, via frame skipping. Frame +rate decimation is specified by setting the frame intervals at +sink and source pads. The ipuX_csiY entity then applies the best +frame skip setting to the CSI to achieve the desired frame rate +at the source pad. + +The following example reduces an assumed incoming 60 Hz frame +rate by half at the IDMAC output source pad: + +.. code-block:: none + + media-ctl -V "'ipu1_csi0':0[fmt:UYVY2X8/640x480@1/60]" + media-ctl -V "'ipu1_csi0':2[fmt:UYVY2X8/640x480@1/30]" + +Frame Interval Monitor in ipuX_csiY +----------------------------------- + +The adv718x decoders can occasionally send corrupt fields during +NTSC/PAL signal re-sync (too little or too many video lines). When +this happens, the IPU triggers a mechanism to re-establish vertical +sync by adding 1 dummy line every frame, which causes a rolling effect +from image to image, and can last a long time before a stable image is +recovered. Or sometimes the mechanism doesn't work at all, causing a +permanent split image (one frame contains lines from two consecutive +captured images). + +From experiment it was found that during image rolling, the frame +intervals (elapsed time between two EOF's) drop below the nominal +value for the current standard, by about one frame time (60 usec), +and remain at that value until rolling stops. + +While the reason for this observation isn't known (the IPU dummy +line mechanism should show an increase in the intervals by 1 line +time every frame, not a fixed value), we can use it to detect the +corrupt fields using a frame interval monitor. If the FIM detects a +bad frame interval, the ipuX_csiY subdev will send the event +V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR. Userland can register with +the FIM event notification on the ipuX_csiY subdev device node. +Userland can issue a streaming restart when this event is received +to correct the rolling/split image. + +The ipuX_csiY subdev includes custom controls to tweak some dials for +FIM. If one of these controls is changed during streaming, the FIM will +be reset and will continue at the new settings. + +- V4L2_CID_IMX_FIM_ENABLE + +Enable/disable the FIM. + +- V4L2_CID_IMX_FIM_NUM + +How many frame interval measurements to average before comparing against +the nominal frame interval reported by the sensor. This can reduce noise +caused by interrupt latency. + +- V4L2_CID_IMX_FIM_TOLERANCE_MIN + +If the averaged intervals fall outside nominal by this amount, in +microseconds, the V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR event is sent. + +- V4L2_CID_IMX_FIM_TOLERANCE_MAX + +If any intervals are higher than this value, those samples are +discarded and do not enter into the average. This can be used to +discard really high interval errors that might be due to interrupt +latency from high system load. + +- V4L2_CID_IMX_FIM_NUM_SKIP + +How many frames to skip after a FIM reset or stream restart before +FIM begins to average intervals. + +- V4L2_CID_IMX_FIM_ICAP_CHANNEL +- V4L2_CID_IMX_FIM_ICAP_EDGE + +These controls will configure an input capture channel as the method +for measuring frame intervals. This is superior to the default method +of measuring frame intervals via EOF interrupt, since it is not subject +to uncertainty errors introduced by interrupt latency. + +Input capture requires hardware support. A VSYNC signal must be routed +to one of the i.MX6 input capture channel pads. + +V4L2_CID_IMX_FIM_ICAP_CHANNEL configures which i.MX6 input capture +channel to use. This must be 0 or 1. + +V4L2_CID_IMX_FIM_ICAP_EDGE configures which signal edge will trigger +input capture events. By default the input capture method is disabled +with a value of IRQ_TYPE_NONE. Set this control to IRQ_TYPE_EDGE_RISING, +IRQ_TYPE_EDGE_FALLING, or IRQ_TYPE_EDGE_BOTH to enable input capture, +triggered on the given signal edge(s). + +When input capture is disabled, frame intervals will be measured via +EOF interrupt. + + +ipuX_vdic +--------- + +The VDIC carries out motion compensated de-interlacing, with three +motion compensation modes: low, medium, and high motion. The mode is +specified with the menu control V4L2_CID_DEINTERLACING_MODE. It has +two sink pads and a single source pad. + +The direct sink pad receives from an ipuX_csiY direct pad. With this +link the VDIC can only operate in high motion mode. + +When the IDMAC sink pad is activated, it receives from an output +or mem2mem device node. With this pipeline, it can also operate +in low and medium modes, because these modes require receiving +frames from memory buffers. Note that an output or mem2mem device +is not implemented yet, so this sink pad currently has no links. + +The source pad routes to the IC pre-processing entity ipuX_ic_prp. + +ipuX_ic_prp +----------- + +This is the IC pre-processing entity. It acts as a router, routing +data from its sink pad to one or both of its source pads. + +It has a single sink pad. The sink pad can receive from the ipuX_csiY +direct pad, or from ipuX_vdic. + +This entity has two source pads. One source pad routes to the +pre-process encode task entity (ipuX_ic_prpenc), the other to the +pre-process viewfinder task entity (ipuX_ic_prpvf). Both source pads +can be activated at the same time if the sink pad is receiving from +ipuX_csiY. Only the source pad to the pre-process viewfinder task entity +can be activated if the sink pad is receiving from ipuX_vdic (frames +from the VDIC can only be processed by the pre-process viewfinder task). + +ipuX_ic_prpenc +-------------- + +This is the IC pre-processing encode entity. It has a single sink +pad from ipuX_ic_prp, and a single source pad. The source pad is +routed to a capture device node, with a node name of the format +"ipuX_ic_prpenc capture". + +This entity performs the IC pre-process encode task operations: +color-space conversion, resizing (downscaling and upscaling), +horizontal and vertical flip, and 90/270 degree rotation. Flip +and rotation are provided via standard V4L2 controls. + +Like the ipuX_csiY IDMAC source, it can also perform simple de-interlace +without motion compensation, and pixel reordering. + +ipuX_ic_prpvf +------------- + +This is the IC pre-processing viewfinder entity. It has a single sink +pad from ipuX_ic_prp, and a single source pad. The source pad is routed +to a capture device node, with a node name of the format +"ipuX_ic_prpvf capture". + +It is identical in operation to ipuX_ic_prpenc, with the same resizing +and CSC operations and flip/rotation controls. It will receive and +process de-interlaced frames from the ipuX_vdic if ipuX_ic_prp is +receiving from ipuX_vdic. + +Like the ipuX_csiY IDMAC source, it can perform simple de-interlace +without motion compensation. However, note that if the ipuX_vdic is +included in the pipeline (ipuX_ic_prp is receiving from ipuX_vdic), +it's not possible to use simple de-interlace in ipuX_ic_prpvf, since +the ipuX_vdic has already carried out de-interlacing (with motion +compensation) and therefore the field type output from ipuX_ic_prp can +only be none. + +Capture Pipelines +----------------- + +The following describe the various use-cases supported by the pipelines. + +The links shown do not include the backend sensor, video mux, or mipi +csi-2 receiver links. This depends on the type of sensor interface +(parallel or mipi csi-2). So these pipelines begin with: + +sensor -> ipuX_csiY_mux -> ... + +for parallel sensors, or: + +sensor -> imx6-mipi-csi2 -> (ipuX_csiY_mux) -> ... + +for mipi csi-2 sensors. The imx6-mipi-csi2 receiver may need to route +to the video mux (ipuX_csiY_mux) before sending to the CSI, depending +on the mipi csi-2 virtual channel, hence ipuX_csiY_mux is shown in +parenthesis. + +Unprocessed Video Capture: +-------------------------- + +Send frames directly from sensor to camera device interface node, with +no conversions, via ipuX_csiY IDMAC source pad: + +-> ipuX_csiY:2 -> ipuX_csiY capture + +IC Direct Conversions: +---------------------- + +This pipeline uses the preprocess encode entity to route frames directly +from the CSI to the IC, to carry out scaling up to 1024x1024 resolution, +CSC, flipping, and image rotation: + +-> ipuX_csiY:1 -> 0:ipuX_ic_prp:1 -> 0:ipuX_ic_prpenc:1 -> ipuX_ic_prpenc capture + +Motion Compensated De-interlace: +-------------------------------- + +This pipeline routes frames from the CSI direct pad to the VDIC entity to +support motion-compensated de-interlacing (high motion mode only), +scaling up to 1024x1024, CSC, flip, and rotation: + +-> ipuX_csiY:1 -> 0:ipuX_vdic:2 -> 0:ipuX_ic_prp:2 -> 0:ipuX_ic_prpvf:1 -> ipuX_ic_prpvf capture + + +Usage Notes +----------- + +To aid in configuration and for backward compatibility with V4L2 +applications that access controls only from video device nodes, the +capture device interfaces inherit controls from the active entities +in the current pipeline, so controls can be accessed either directly +from the subdev or from the active capture device interface. For +example, the FIM controls are available either from the ipuX_csiY +subdevs or from the active capture device. + +The following are specific usage notes for the Sabre* reference +boards: + + +SabreLite with OV5642 and OV5640 +-------------------------------- + +This platform requires the OmniVision OV5642 module with a parallel +camera interface, and the OV5640 module with a MIPI CSI-2 +interface. Both modules are available from Boundary Devices: + +- https://boundarydevices.com/product/nit6x_5mp +- https://boundarydevices.com/product/nit6x_5mp_mipi + +Note that if only one camera module is available, the other sensor +node can be disabled in the device tree. + +The OV5642 module is connected to the parallel bus input on the i.MX +internal video mux to IPU1 CSI0. It's i2c bus connects to i2c bus 2. + +The MIPI CSI-2 OV5640 module is connected to the i.MX internal MIPI CSI-2 +receiver, and the four virtual channel outputs from the receiver are +routed as follows: vc0 to the IPU1 CSI0 mux, vc1 directly to IPU1 CSI1, +vc2 directly to IPU2 CSI0, and vc3 to the IPU2 CSI1 mux. The OV5640 is +also connected to i2c bus 2 on the SabreLite, therefore the OV5642 and +OV5640 must not share the same i2c slave address. + +The following basic example configures unprocessed video capture +pipelines for both sensors. The OV5642 is routed to ipu1_csi0, and +the OV5640, transmitting on MIPI CSI-2 virtual channel 1 (which is +imx6-mipi-csi2 pad 2), is routed to ipu1_csi1. Both sensors are +configured to output 640x480, and the OV5642 outputs YUYV2X8, the +OV5640 UYVY2X8: + +.. code-block:: none + + # Setup links for OV5642 + media-ctl -l "'ov5642 1-0042':0 -> 'ipu1_csi0_mux':1[1]" + media-ctl -l "'ipu1_csi0_mux':2 -> 'ipu1_csi0':0[1]" + media-ctl -l "'ipu1_csi0':2 -> 'ipu1_csi0 capture':0[1]" + # Setup links for OV5640 + media-ctl -l "'ov5640 1-0040':0 -> 'imx6-mipi-csi2':0[1]" + media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]" + media-ctl -l "'ipu1_csi1':2 -> 'ipu1_csi1 capture':0[1]" + # Configure pads for OV5642 pipeline + media-ctl -V "'ov5642 1-0042':0 [fmt:YUYV2X8/640x480 field:none]" + media-ctl -V "'ipu1_csi0_mux':2 [fmt:YUYV2X8/640x480 field:none]" + media-ctl -V "'ipu1_csi0':2 [fmt:AYUV32/640x480 field:none]" + # Configure pads for OV5640 pipeline + media-ctl -V "'ov5640 1-0040':0 [fmt:UYVY2X8/640x480 field:none]" + media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]" + media-ctl -V "'ipu1_csi1':2 [fmt:AYUV32/640x480 field:none]" + +Streaming can then begin independently on the capture device nodes +"ipu1_csi0 capture" and "ipu1_csi1 capture". The v4l2-ctl tool can +be used to select any supported YUV pixelformat on the capture device +nodes, including planar. + +SabreAuto with ADV7180 decoder +------------------------------ + +On the SabreAuto, an on-board ADV7180 SD decoder is connected to the +parallel bus input on the internal video mux to IPU1 CSI0. + +The following example configures a pipeline to capture from the ADV7180 +video decoder, assuming NTSC 720x480 input signals, with Motion +Compensated de-interlacing. Pad field types assume the adv7180 outputs +"interlaced". $outputfmt can be any format supported by the ipu1_ic_prpvf +entity at its output pad: + +.. code-block:: none + + # Setup links + media-ctl -l "'adv7180 3-0021':0 -> 'ipu1_csi0_mux':1[1]" + media-ctl -l "'ipu1_csi0_mux':2 -> 'ipu1_csi0':0[1]" + media-ctl -l "'ipu1_csi0':1 -> 'ipu1_vdic':0[1]" + media-ctl -l "'ipu1_vdic':2 -> 'ipu1_ic_prp':0[1]" + media-ctl -l "'ipu1_ic_prp':2 -> 'ipu1_ic_prpvf':0[1]" + media-ctl -l "'ipu1_ic_prpvf':1 -> 'ipu1_ic_prpvf capture':0[1]" + # Configure pads + media-ctl -V "'adv7180 3-0021':0 [fmt:UYVY2X8/720x480]" + media-ctl -V "'ipu1_csi0_mux':2 [fmt:UYVY2X8/720x480 field:interlaced]" + media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/720x480 field:interlaced]" + media-ctl -V "'ipu1_vdic':2 [fmt:AYUV32/720x480 field:none]" + media-ctl -V "'ipu1_ic_prp':2 [fmt:AYUV32/720x480 field:none]" + media-ctl -V "'ipu1_ic_prpvf':1 [fmt:$outputfmt field:none]" + +Streaming can then begin on the capture device node at +"ipu1_ic_prpvf capture". The v4l2-ctl tool can be used to select any +supported YUV or RGB pixelformat on the capture device node. + +This platform accepts Composite Video analog inputs to the ADV7180 on +Ain1 (connector J42). + +SabreSD with MIPI CSI-2 OV5640 +------------------------------ + +Similarly to SabreLite, the SabreSD supports a parallel interface +OV5642 module on IPU1 CSI0, and a MIPI CSI-2 OV5640 module. The OV5642 +connects to i2c bus 1 and the OV5640 to i2c bus 2. + +The device tree for SabreSD includes OF graphs for both the parallel +OV5642 and the MIPI CSI-2 OV5640, but as of this writing only the MIPI +CSI-2 OV5640 has been tested, so the OV5642 node is currently disabled. +The OV5640 module connects to MIPI connector J5 (sorry I don't have the +compatible module part number or URL). + +The following example configures a direct conversion pipeline to capture +from the OV5640, transmitting on MIPI CSI-2 virtual channel 1. $sensorfmt +can be any format supported by the OV5640. $sensordim is the frame +dimension part of $sensorfmt (minus the mbus pixel code). $outputfmt can +be any format supported by the ipu1_ic_prpenc entity at its output pad: + +.. code-block:: none + + # Setup links + media-ctl -l "'ov5640 1-003c':0 -> 'imx6-mipi-csi2':0[1]" + media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]" + media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]" + media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]" + media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]" + # Configure pads + media-ctl -V "'ov5640 1-003c':0 [fmt:$sensorfmt field:none]" + media-ctl -V "'imx6-mipi-csi2':2 [fmt:$sensorfmt field:none]" + media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/$sensordim field:none]" + media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/$sensordim field:none]" + media-ctl -V "'ipu1_ic_prpenc':1 [fmt:$outputfmt field:none]" + +Streaming can then begin on "ipu1_ic_prpenc capture" node. The v4l2-ctl +tool can be used to select any supported YUV or RGB pixelformat on the +capture device node. + + +Known Issues +------------ + +1. When using 90 or 270 degree rotation control at capture resolutions + near the IC resizer limit of 1024x1024, and combined with planar + pixel formats (YUV420, YUV422p), frame capture will often fail with + no end-of-frame interrupts from the IDMAC channel. To work around + this, use lower resolution and/or packed formats (YUYV, RGB3, etc.) + when 90 or 270 rotations are needed. + + +File list +--------- + +drivers/staging/media/imx/ +include/media/imx.h +include/linux/imx-media.h + +References +---------- + +.. [#f1] http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf +.. [#f2] http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6SDLRM.pdf + + +Authors +------- + +- Steve Longerbeam <steve_longerbeam@mentor.com> +- Philipp Zabel <kernel@pengutronix.de> +- Russell King <linux@armlinux.org.uk> + +Copyright (C) 2012-2017 Mentor Graphics Inc. diff --git a/Documentation/media/v4l-drivers/index.rst b/Documentation/media/v4l-drivers/index.rst new file mode 100644 index 000000000..679238e78 --- /dev/null +++ b/Documentation/media/v4l-drivers/index.rst @@ -0,0 +1,67 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. include:: <isonum.txt> + +.. _v4l-drivers: + +################################################ +Video4Linux (V4L) driver-specific documentation +################################################ + +**Copyright** |copy| 1999-2016 : LinuxTV Developers + +This documentation is free software; you can redistribute it and/or modify it +under the terms of the GNU General Public License as published by the Free +Software Foundation version 2 of the License. + +This program is distributed in the hope that it will be useful, but WITHOUT +ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +more details. + +For more details see the file COPYING in the source distribution of Linux. + +.. only:: html + + .. class:: toc-title + + Table of Contents + +.. toctree:: + :maxdepth: 5 + :numbered: + + fourcc + v4l-with-ir + tuners + cardlist + bttv + cafe_ccic + cpia2 + cx18 + cx2341x + cx88 + davinci-vpbe + fimc + imx + ivtv + max2175 + meye + omap3isp + omap4_camera + philips + pvrusb2 + pxa_camera + qcom_camss + radiotrack + rcar-fdp1 + saa7134 + sh_mobile_ceu_camera + si470x + si4713 + si476x + soc-camera + uvcvideo + vivid + zoran + zr364xx diff --git a/Documentation/media/v4l-drivers/ivtv-cardlist.rst b/Documentation/media/v4l-drivers/ivtv-cardlist.rst new file mode 100644 index 000000000..022dca80c --- /dev/null +++ b/Documentation/media/v4l-drivers/ivtv-cardlist.rst @@ -0,0 +1,137 @@ +IVTV cards list +=============== + +.. tabularcolumns:: |p{1.4cm}|p{12.7cm}|p{3.4cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - PCI IDs + + * - 0 + - Hauppauge WinTV PVR-250 + - IVTV16 104d:813d + + * - 1 + - Hauppauge WinTV PVR-350 + - IVTV16 104d:813d + + * - 2 + - Hauppauge WinTV PVR-150 + - IVTV16 104d:813d + + * - 3 + - AVerMedia M179 + - IVTV15 1461:a3cf, IVTV15 1461:a3ce + + * - 4 + - Yuan MPG600, Kuroutoshikou ITVC16-STVLP + - IVTV16 12ab:fff3, IVTV16 12ab:ffff + + * - 5 + - YUAN MPG160, Kuroutoshikou ITVC15-STVLP, I/O Data GV-M2TV/PCI + - IVTV15 10fc:40a0 + + * - 6 + - Yuan PG600, Diamond PVR-550 + - IVTV16 ff92:0070, IVTV16 ffab:0600 + + * - 7 + - Adaptec VideOh! AVC-2410 + - IVTV16 9005:0093 + + * - 8 + - Adaptec VideOh! AVC-2010 + - IVTV16 9005:0092 + + * - 9 + - Nagase Transgear 5000TV + - IVTV16 1461:bfff + + * - 10 + - AOpen VA2000MAX-SNT6 + - IVTV16 0000:ff5f + + * - 11 + - Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP + - IVTV16 12ab:0600, IVTV16 fbab:0600, IVTV16 1154:0523 + + * - 12 + - I/O Data GV-MVP/RX, GV-MVP/RX2W (dual tuner) + - IVTV16 10fc:d01e, IVTV16 10fc:d038, IVTV16 10fc:d039 + + * - 13 + - I/O Data GV-MVP/RX2E + - IVTV16 10fc:d025 + + * - 14 + - GotView PCI DVD + - IVTV16 12ab:0600 + + * - 15 + - GotView PCI DVD2 Deluxe + - IVTV16 ffac:0600 + + * - 16 + - Yuan MPC622 + - IVTV16 ff01:d998 + + * - 17 + - Digital Cowboy DCT-MTVP1 + - IVTV16 1461:bfff + + * - 18 + - Yuan PG600-2, GotView PCI DVD Lite + - IVTV16 ffab:0600, IVTV16 ffad:0600 + + * - 19 + - Club3D ZAP-TV1x01 + - IVTV16 ffab:0600 + + * - 20 + - AVerTV MCE 116 Plus + - IVTV16 1461:c439 + + * - 21 + - ASUS Falcon2 + - IVTV16 1043:4b66, IVTV16 1043:462e, IVTV16 1043:4b2e + + * - 22 + - AVerMedia PVR-150 Plus / AVerTV M113 Partsnic (Daewoo) Tuner + - IVTV16 1461:c034, IVTV16 1461:c035 + + * - 23 + - AVerMedia EZMaker PCI Deluxe + - IVTV16 1461:c03f + + * - 24 + - AVerMedia M104 + - IVTV16 1461:c136 + + * - 25 + - Buffalo PC-MV5L/PCI + - IVTV16 1154:052b + + * - 26 + - AVerMedia UltraTV 1500 MCE / AVerTV M113 Philips Tuner + - IVTV16 1461:c019, IVTV16 1461:c01b + + * - 27 + - Sony VAIO Giga Pocket (ENX Kikyou) + - IVTV16 104d:813d + + * - 28 + - Hauppauge WinTV PVR-350 (V1) + - IVTV16 104d:813d + + * - 29 + - Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP (no GR) + - IVTV16 104d:813d + + * - 30 + - Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP (no GR/YCS) + - IVTV16 104d:813d diff --git a/Documentation/media/v4l-drivers/ivtv.rst b/Documentation/media/v4l-drivers/ivtv.rst new file mode 100644 index 000000000..3ba464c4f --- /dev/null +++ b/Documentation/media/v4l-drivers/ivtv.rst @@ -0,0 +1,217 @@ + +The ivtv driver +=============== + +Author: Hans Verkuil <hverkuil@xs4all.nl> + +This is a v4l2 device driver for the Conexant cx23415/6 MPEG encoder/decoder. +The cx23415 can do both encoding and decoding, the cx23416 can only do MPEG +encoding. Currently the only card featuring full decoding support is the +Hauppauge PVR-350. + +.. note:: + + #) This driver requires the latest encoder firmware (version 2.06.039, size + 376836 bytes). Get the firmware from here: + + https://linuxtv.org/downloads/firmware/#conexant + + #) 'normal' TV applications do not work with this driver, you need + an application that can handle MPEG input such as mplayer, xine, MythTV, + etc. + +The primary goal of the IVTV project is to provide a "clean room" Linux +Open Source driver implementation for video capture cards based on the +iCompression iTVC15 or Conexant CX23415/CX23416 MPEG Codec. + +Features +-------- + + * Hardware mpeg2 capture of broadcast video (and sound) via the tuner or + S-Video/Composite and audio line-in. + * Hardware mpeg2 capture of FM radio where hardware support exists + * Supports NTSC, PAL, SECAM with stereo sound + * Supports SAP and bilingual transmissions. + * Supports raw VBI (closed captions and teletext). + * Supports sliced VBI (closed captions and teletext) and is able to insert + this into the captured MPEG stream. + * Supports raw YUV and PCM input. + +Additional features for the PVR-350 (CX23415 based) +--------------------------------------------------- + + * Provides hardware mpeg2 playback + * Provides comprehensive OSD (On Screen Display: ie. graphics overlaying the + video signal) + * Provides a framebuffer (allowing X applications to appear on the video + device) + * Supports raw YUV output. + +IMPORTANT: In case of problems first read this page: + https://help.ubuntu.com/community/Install_IVTV_Troubleshooting + +See also +-------- + +https://linuxtv.org + +IRC +--- + +irc://irc.freenode.net/#v4l + +---------------------------------------------------------- + +Devices +------- + +A maximum of 12 ivtv boards are allowed at the moment. + +Cards that don't have a video output capability (i.e. non PVR350 cards) +lack the vbi8, vbi16, video16 and video48 devices. They also do not +support the framebuffer device /dev/fbx for OSD. + +The radio0 device may or may not be present, depending on whether the +card has a radio tuner or not. + +Here is a list of the base v4l devices: + +.. code-block:: none + + crw-rw---- 1 root video 81, 0 Jun 19 22:22 /dev/video0 + crw-rw---- 1 root video 81, 16 Jun 19 22:22 /dev/video16 + crw-rw---- 1 root video 81, 24 Jun 19 22:22 /dev/video24 + crw-rw---- 1 root video 81, 32 Jun 19 22:22 /dev/video32 + crw-rw---- 1 root video 81, 48 Jun 19 22:22 /dev/video48 + crw-rw---- 1 root video 81, 64 Jun 19 22:22 /dev/radio0 + crw-rw---- 1 root video 81, 224 Jun 19 22:22 /dev/vbi0 + crw-rw---- 1 root video 81, 228 Jun 19 22:22 /dev/vbi8 + crw-rw---- 1 root video 81, 232 Jun 19 22:22 /dev/vbi16 + +Base devices +------------ + +For every extra card you have the numbers increased by one. For example, +/dev/video0 is listed as the 'base' encoding capture device so we have: + +- /dev/video0 is the encoding capture device for the first card (card 0) +- /dev/video1 is the encoding capture device for the second card (card 1) +- /dev/video2 is the encoding capture device for the third card (card 2) + +Note that if the first card doesn't have a feature (eg no decoder, so no +video16, the second card will still use video17. The simple rule is 'add +the card number to the base device number'. If you have other capture +cards (e.g. WinTV PCI) that are detected first, then you have to tell +the ivtv module about it so that it will start counting at 1 (or 2, or +whatever). Otherwise the device numbers can get confusing. The ivtv +'ivtv_first_minor' module option can be used for that. + + +- /dev/video0 + + The encoding capture device(s). + + Read-only. + + Reading from this device gets you the MPEG1/2 program stream. + Example: + + .. code-block:: none + + cat /dev/video0 > my.mpg (you need to hit ctrl-c to exit) + + +- /dev/video16 + + The decoder output device(s) + + Write-only. Only present if the MPEG decoder (i.e. CX23415) exists. + + An mpeg2 stream sent to this device will appear on the selected video + display, audio will appear on the line-out/audio out. It is only + available for cards that support video out. Example: + + .. code-block:: none + + cat my.mpg >/dev/video16 + + +- /dev/video24 + + The raw audio capture device(s). + + Read-only + + The raw audio PCM stereo stream from the currently selected + tuner or audio line-in. Reading from this device results in a raw + (signed 16 bit Little Endian, 48000 Hz, stereo pcm) capture. + This device only captures audio. This should be replaced by an ALSA + device in the future. + Note that there is no corresponding raw audio output device, this is + not supported in the decoder firmware. + + +- /dev/video32 + + The raw video capture device(s) + + Read-only + + The raw YUV video output from the current video input. The YUV format + is non-standard (V4L2_PIX_FMT_HM12). + + Note that the YUV and PCM streams are not synchronized, so they are of + limited use. + + +- /dev/video48 + + The raw video display device(s) + + Write-only. Only present if the MPEG decoder (i.e. CX23415) exists. + + Writes a YUV stream to the decoder of the card. + + +- /dev/radio0 + + The radio tuner device(s) + + Cannot be read or written. + + Used to enable the radio tuner and tune to a frequency. You cannot + read or write audio streams with this device. Once you use this + device to tune the radio, use /dev/video24 to read the raw pcm stream + or /dev/video0 to get an mpeg2 stream with black video. + + +- /dev/vbi0 + + The 'vertical blank interval' (Teletext, CC, WSS etc) capture device(s) + + Read-only + + Captures the raw (or sliced) video data sent during the Vertical Blank + Interval. This data is used to encode teletext, closed captions, VPS, + widescreen signalling, electronic program guide information, and other + services. + + +- /dev/vbi8 + + Processed vbi feedback device(s) + + Read-only. Only present if the MPEG decoder (i.e. CX23415) exists. + + The sliced VBI data embedded in an MPEG stream is reproduced on this + device. So while playing back a recording on /dev/video16, you can + read the embedded VBI data from /dev/vbi8. + + +- /dev/vbi16 + + The vbi 'display' device(s) + + Write-only. Only present if the MPEG decoder (i.e. CX23415) exists. + + Can be used to send sliced VBI data to the video-out connector. diff --git a/Documentation/media/v4l-drivers/max2175.rst b/Documentation/media/v4l-drivers/max2175.rst new file mode 100644 index 000000000..b1a4c89fd --- /dev/null +++ b/Documentation/media/v4l-drivers/max2175.rst @@ -0,0 +1,62 @@ +Maxim Integrated MAX2175 RF to bits tuner driver +================================================ + +The MAX2175 driver implements the following driver-specific controls: + +``V4L2_CID_MAX2175_I2S_ENABLE`` +------------------------------- + Enable/Disable I2S output of the tuner. This is a private control + that can be accessed only using the subdev interface. + Refer to Documentation/media/kapi/v4l2-controls.rst for more details. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 4 + + * - ``(0)`` + - I2S output is disabled. + * - ``(1)`` + - I2S output is enabled. + +``V4L2_CID_MAX2175_HSLS`` +------------------------- + The high-side/low-side (HSLS) control of the tuner for a given band. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 4 + + * - ``(0)`` + - The LO frequency position is below the desired frequency. + * - ``(1)`` + - The LO frequency position is above the desired frequency. + +``V4L2_CID_MAX2175_RX_MODE (menu)`` +----------------------------------- + The Rx mode controls a number of preset parameters of the tuner like + sample clock (sck), sampling rate etc. These multiple settings are + provided under one single label called Rx mode in the datasheet. The + list below shows the supported modes with a brief description. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 4 + + * - ``"Europe modes"`` + * - ``"FM 1.2" (0)`` + - This configures FM band with a sample rate of 0.512 million + samples/sec with a 10.24 MHz sck. + * - ``"DAB 1.2" (1)`` + - This configures VHF band with a sample rate of 2.048 million + samples/sec with a 32.768 MHz sck. + + * - ``"North America modes"`` + * - ``"FM 1.0" (0)`` + - This configures FM band with a sample rate of 0.7441875 million + samples/sec with a 14.88375 MHz sck. + * - ``"DAB 1.2" (1)`` + - This configures FM band with a sample rate of 0.372 million + samples/sec with a 7.441875 MHz sck. diff --git a/Documentation/media/v4l-drivers/meye.rst b/Documentation/media/v4l-drivers/meye.rst new file mode 100644 index 000000000..cfaba6021 --- /dev/null +++ b/Documentation/media/v4l-drivers/meye.rst @@ -0,0 +1,132 @@ +.. include:: <isonum.txt> + +Vaio Picturebook Motion Eye Camera Driver +========================================= + +Copyright |copy| 2001-2004 Stelian Pop <stelian@popies.net> + +Copyright |copy| 2001-2002 Alcôve <www.alcove.com> + +Copyright |copy| 2000 Andrew Tridgell <tridge@samba.org> + +This driver enable the use of video4linux compatible applications with the +Motion Eye camera. This driver requires the "Sony Laptop Extras" driver (which +can be found in the "Misc devices" section of the kernel configuration utility) +to be compiled and installed (using its "camera=1" parameter). + +It can do at maximum 30 fps @ 320x240 or 15 fps @ 640x480. + +Grabbing is supported in packed YUV colorspace only. + +MJPEG hardware grabbing is supported via a private API (see below). + +Hardware supported +------------------ + +This driver supports the 'second' version of the MotionEye camera :) + +The first version was connected directly on the video bus of the Neomagic +video card and is unsupported. + +The second one, made by Kawasaki Steel is fully supported by this +driver (PCI vendor/device is 0x136b/0xff01) + +The third one, present in recent (more or less last year) Picturebooks +(C1M* models), is not supported. The manufacturer has given the specs +to the developers under a NDA (which allows the development of a GPL +driver however), but things are not moving very fast (see +http://r-engine.sourceforge.net/) (PCI vendor/device is 0x10cf/0x2011). + +There is a forth model connected on the USB bus in TR1* Vaio laptops. +This camera is not supported at all by the current driver, in fact +little information if any is available for this camera +(USB vendor/device is 0x054c/0x0107). + +Driver options +-------------- + +Several options can be passed to the meye driver using the standard +module argument syntax (<param>=<value> when passing the option to the +module or meye.<param>=<value> on the kernel boot line when meye is +statically linked into the kernel). Those options are: + +.. code-block:: none + + gbuffers: number of capture buffers, default is 2 (32 max) + + gbufsize: size of each capture buffer, default is 614400 + + video_nr: video device to register (0 = /dev/video0, etc) + +Module use +---------- + +In order to automatically load the meye module on use, you can put those lines +in your /etc/modprobe.d/meye.conf file: + +.. code-block:: none + + alias char-major-81 videodev + alias char-major-81-0 meye + options meye gbuffers=32 + +Usage: +------ + +.. code-block:: none + + xawtv >= 3.49 (<http://bytesex.org/xawtv/>) + for display and uncompressed video capture: + + xawtv -c /dev/video0 -geometry 640x480 + or + xawtv -c /dev/video0 -geometry 320x240 + + motioneye (<http://popies.net/meye/>) + for getting ppm or jpg snapshots, mjpeg video + +Private API +----------- + +The driver supports frame grabbing with the video4linux API, +so all video4linux tools (like xawtv) should work with this driver. + +Besides the video4linux interface, the driver has a private interface +for accessing the Motion Eye extended parameters (camera sharpness, +agc, video framerate), the shapshot and the MJPEG capture facilities. + +This interface consists of several ioctls (prototypes and structures +can be found in include/linux/meye.h): + +MEYEIOC_G_PARAMS and MEYEIOC_S_PARAMS + Get and set the extended parameters of the motion eye camera. + The user should always query the current parameters with + MEYEIOC_G_PARAMS, change what he likes and then issue the + MEYEIOC_S_PARAMS call (checking for -EINVAL). The extended + parameters are described by the meye_params structure. + + +MEYEIOC_QBUF_CAPT + Queue a buffer for capture (the buffers must have been + obtained with a VIDIOCGMBUF call and mmap'ed by the + application). The argument to MEYEIOC_QBUF_CAPT is the + buffer number to queue (or -1 to end capture). The first + call to MEYEIOC_QBUF_CAPT starts the streaming capture. + +MEYEIOC_SYNC + Takes as an argument the buffer number you want to sync. + This ioctl blocks until the buffer is filled and ready + for the application to use. It returns the buffer size. + +MEYEIOC_STILLCAPT and MEYEIOC_STILLJCAPT + Takes a snapshot in an uncompressed or compressed jpeg format. + This ioctl blocks until the snapshot is done and returns (for + jpeg snapshot) the size of the image. The image data is + available from the first mmap'ed buffer. + +Look at the 'motioneye' application code for an actual example. + +Bugs / Todo +----------- + +- 'motioneye' still uses the meye private v4l1 API extensions. diff --git a/Documentation/media/v4l-drivers/omap3isp.rst b/Documentation/media/v4l-drivers/omap3isp.rst new file mode 100644 index 000000000..336e58fea --- /dev/null +++ b/Documentation/media/v4l-drivers/omap3isp.rst @@ -0,0 +1,282 @@ +.. include:: <isonum.txt> + +OMAP 3 Image Signal Processor (ISP) driver +========================================== + +Copyright |copy| 2010 Nokia Corporation + +Copyright |copy| 2009 Texas Instruments, Inc. + +Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>, +Sakari Ailus <sakari.ailus@iki.fi>, David Cohen <dacohen@gmail.com> + + +Introduction +------------ + +This file documents the Texas Instruments OMAP 3 Image Signal Processor (ISP) +driver located under drivers/media/platform/omap3isp. The original driver was +written by Texas Instruments but since that it has been rewritten (twice) at +Nokia. + +The driver has been successfully used on the following versions of OMAP 3: + +- 3430 +- 3530 +- 3630 + +The driver implements V4L2, Media controller and v4l2_subdev interfaces. +Sensor, lens and flash drivers using the v4l2_subdev interface in the kernel +are supported. + + +Split to subdevs +---------------- + +The OMAP 3 ISP is split into V4L2 subdevs, each of the blocks inside the ISP +having one subdev to represent it. Each of the subdevs provide a V4L2 subdev +interface to userspace. + +- OMAP3 ISP CCP2 +- OMAP3 ISP CSI2a +- OMAP3 ISP CCDC +- OMAP3 ISP preview +- OMAP3 ISP resizer +- OMAP3 ISP AEWB +- OMAP3 ISP AF +- OMAP3 ISP histogram + +Each possible link in the ISP is modelled by a link in the Media controller +interface. For an example program see [#f2]_. + + +Controlling the OMAP 3 ISP +-------------------------- + +In general, the settings given to the OMAP 3 ISP take effect at the beginning +of the following frame. This is done when the module becomes idle during the +vertical blanking period on the sensor. In memory-to-memory operation the pipe +is run one frame at a time. Applying the settings is done between the frames. + +All the blocks in the ISP, excluding the CSI-2 and possibly the CCP2 receiver, +insist on receiving complete frames. Sensors must thus never send the ISP +partial frames. + +Autoidle does have issues with some ISP blocks on the 3430, at least. +Autoidle is only enabled on 3630 when the omap3isp module parameter autoidle +is non-zero. + + +Events +------ + +The OMAP 3 ISP driver does support the V4L2 event interface on CCDC and +statistics (AEWB, AF and histogram) subdevs. + +The CCDC subdev produces V4L2_EVENT_FRAME_SYNC type event on HS_VS +interrupt which is used to signal frame start. Earlier version of this +driver used V4L2_EVENT_OMAP3ISP_HS_VS for this purpose. The event is +triggered exactly when the reception of the first line of the frame starts +in the CCDC module. The event can be subscribed on the CCDC subdev. + +(When using parallel interface one must pay account to correct configuration +of the VS signal polarity. This is automatically correct when using the serial +receivers.) + +Each of the statistics subdevs is able to produce events. An event is +generated whenever a statistics buffer can be dequeued by a user space +application using the VIDIOC_OMAP3ISP_STAT_REQ IOCTL. The events available +are: + +- V4L2_EVENT_OMAP3ISP_AEWB +- V4L2_EVENT_OMAP3ISP_AF +- V4L2_EVENT_OMAP3ISP_HIST + +The type of the event data is struct omap3isp_stat_event_status for these +ioctls. If there is an error calculating the statistics, there will be an +event as usual, but no related statistics buffer. In this case +omap3isp_stat_event_status.buf_err is set to non-zero. + + +Private IOCTLs +-------------- + +The OMAP 3 ISP driver supports standard V4L2 IOCTLs and controls where +possible and practical. Much of the functions provided by the ISP, however, +does not fall under the standard IOCTLs --- gamma tables and configuration of +statistics collection are examples of such. + +In general, there is a private ioctl for configuring each of the blocks +containing hardware-dependent functions. + +The following private IOCTLs are supported: + +- VIDIOC_OMAP3ISP_CCDC_CFG +- VIDIOC_OMAP3ISP_PRV_CFG +- VIDIOC_OMAP3ISP_AEWB_CFG +- VIDIOC_OMAP3ISP_HIST_CFG +- VIDIOC_OMAP3ISP_AF_CFG +- VIDIOC_OMAP3ISP_STAT_REQ +- VIDIOC_OMAP3ISP_STAT_EN + +The parameter structures used by these ioctls are described in +include/linux/omap3isp.h. The detailed functions of the ISP itself related to +a given ISP block is described in the Technical Reference Manuals (TRMs) --- +see the end of the document for those. + +While it is possible to use the ISP driver without any use of these private +IOCTLs it is not possible to obtain optimal image quality this way. The AEWB, +AF and histogram modules cannot be used without configuring them using the +appropriate private IOCTLs. + + +CCDC and preview block IOCTLs +----------------------------- + +The VIDIOC_OMAP3ISP_CCDC_CFG and VIDIOC_OMAP3ISP_PRV_CFG IOCTLs are used to +configure, enable and disable functions in the CCDC and preview blocks, +respectively. Both IOCTLs control several functions in the blocks they +control. VIDIOC_OMAP3ISP_CCDC_CFG IOCTL accepts a pointer to struct +omap3isp_ccdc_update_config as its argument. Similarly VIDIOC_OMAP3ISP_PRV_CFG +accepts a pointer to struct omap3isp_prev_update_config. The definition of +both structures is available in [#f1]_. + +The update field in the structures tells whether to update the configuration +for the specific function and the flag tells whether to enable or disable the +function. + +The update and flag bit masks accept the following values. Each separate +functions in the CCDC and preview blocks is associated with a flag (either +disable or enable; part of the flag field in the structure) and a pointer to +configuration data for the function. + +Valid values for the update and flag fields are listed here for +VIDIOC_OMAP3ISP_CCDC_CFG. Values may be or'ed to configure more than one +function in the same IOCTL call. + +- OMAP3ISP_CCDC_ALAW +- OMAP3ISP_CCDC_LPF +- OMAP3ISP_CCDC_BLCLAMP +- OMAP3ISP_CCDC_BCOMP +- OMAP3ISP_CCDC_FPC +- OMAP3ISP_CCDC_CULL +- OMAP3ISP_CCDC_CONFIG_LSC +- OMAP3ISP_CCDC_TBL_LSC + +The corresponding values for the VIDIOC_OMAP3ISP_PRV_CFG are here: + +- OMAP3ISP_PREV_LUMAENH +- OMAP3ISP_PREV_INVALAW +- OMAP3ISP_PREV_HRZ_MED +- OMAP3ISP_PREV_CFA +- OMAP3ISP_PREV_CHROMA_SUPP +- OMAP3ISP_PREV_WB +- OMAP3ISP_PREV_BLKADJ +- OMAP3ISP_PREV_RGB2RGB +- OMAP3ISP_PREV_COLOR_CONV +- OMAP3ISP_PREV_YC_LIMIT +- OMAP3ISP_PREV_DEFECT_COR +- OMAP3ISP_PREV_GAMMABYPASS +- OMAP3ISP_PREV_DRK_FRM_CAPTURE +- OMAP3ISP_PREV_DRK_FRM_SUBTRACT +- OMAP3ISP_PREV_LENS_SHADING +- OMAP3ISP_PREV_NF +- OMAP3ISP_PREV_GAMMA + +The associated configuration pointer for the function may not be NULL when +enabling the function. When disabling a function the configuration pointer is +ignored. + + +Statistic blocks IOCTLs +----------------------- + +The statistics subdevs do offer more dynamic configuration options than the +other subdevs. They can be enabled, disable and reconfigured when the pipeline +is in streaming state. + +The statistics blocks always get the input image data from the CCDC (as the +histogram memory read isn't implemented). The statistics are dequeueable by +the user from the statistics subdev nodes using private IOCTLs. + +The private IOCTLs offered by the AEWB, AF and histogram subdevs are heavily +reflected by the register level interface offered by the ISP hardware. There +are aspects that are purely related to the driver implementation and these are +discussed next. + +VIDIOC_OMAP3ISP_STAT_EN +----------------------- + +This private IOCTL enables/disables a statistic module. If this request is +done before streaming, it will take effect as soon as the pipeline starts to +stream. If the pipeline is already streaming, it will take effect as soon as +the CCDC becomes idle. + +VIDIOC_OMAP3ISP_AEWB_CFG, VIDIOC_OMAP3ISP_HIST_CFG and VIDIOC_OMAP3ISP_AF_CFG +----------------------------------------------------------------------------- + +Those IOCTLs are used to configure the modules. They require user applications +to have an in-depth knowledge of the hardware. Most of the fields explanation +can be found on OMAP's TRMs. The two following fields common to all the above +configure private IOCTLs require explanation for better understanding as they +are not part of the TRM. + +omap3isp_[h3a_af/h3a_aewb/hist]\_config.buf_size: + +The modules handle their buffers internally. The necessary buffer size for the +module's data output depends on the requested configuration. Although the +driver supports reconfiguration while streaming, it does not support a +reconfiguration which requires bigger buffer size than what is already +internally allocated if the module is enabled. It will return -EBUSY on this +case. In order to avoid such condition, either disable/reconfigure/enable the +module or request the necessary buffer size during the first configuration +while the module is disabled. + +The internal buffer size allocation considers the requested configuration's +minimum buffer size and the value set on buf_size field. If buf_size field is +out of [minimum, maximum] buffer size range, it's clamped to fit in there. +The driver then selects the biggest value. The corrected buf_size value is +written back to user application. + +omap3isp_[h3a_af/h3a_aewb/hist]\_config.config_counter: + +As the configuration doesn't take effect synchronously to the request, the +driver must provide a way to track this information to provide more accurate +data. After a configuration is requested, the config_counter returned to user +space application will be an unique value associated to that request. When +user application receives an event for buffer availability or when a new +buffer is requested, this config_counter is used to match a buffer data and a +configuration. + +VIDIOC_OMAP3ISP_STAT_REQ +------------------------ + +Send to user space the oldest data available in the internal buffer queue and +discards such buffer afterwards. The field omap3isp_stat_data.frame_number +matches with the video buffer's field_count. + + +Technical reference manuals (TRMs) and other documentation +---------------------------------------------------------- + +OMAP 3430 TRM: +<URL:http://focus.ti.com/pdfs/wtbu/OMAP34xx_ES3.1.x_PUBLIC_TRM_vZM.zip> +Referenced 2011-03-05. + +OMAP 35xx TRM: +<URL:http://www.ti.com/litv/pdf/spruf98o> Referenced 2011-03-05. + +OMAP 3630 TRM: +<URL:http://focus.ti.com/pdfs/wtbu/OMAP36xx_ES1.x_PUBLIC_TRM_vQ.zip> +Referenced 2011-03-05. + +DM 3730 TRM: +<URL:http://www.ti.com/litv/pdf/sprugn4h> Referenced 2011-03-06. + + +References +---------- + +.. [#f1] include/linux/omap3isp.h + +.. [#f2] http://git.ideasonboard.org/?p=media-ctl.git;a=summary diff --git a/Documentation/media/v4l-drivers/omap4_camera.rst b/Documentation/media/v4l-drivers/omap4_camera.rst new file mode 100644 index 000000000..54b427b28 --- /dev/null +++ b/Documentation/media/v4l-drivers/omap4_camera.rst @@ -0,0 +1,60 @@ +OMAP4 ISS Driver +================ + +Author: Sergio Aguirre <sergio.a.aguirre@gmail.com> + +Copyright (C) 2012, Texas Instruments + +Introduction +------------ + +The OMAP44XX family of chips contains the Imaging SubSystem (a.k.a. ISS), +Which contains several components that can be categorized in 3 big groups: + +- Interfaces (2 Interfaces: CSI2-A & CSI2-B/CCP2) +- ISP (Image Signal Processor) +- SIMCOP (Still Image Coprocessor) + +For more information, please look in [#f1]_ for latest version of: +"OMAP4430 Multimedia Device Silicon Revision 2.x" + +As of Revision AB, the ISS is described in detail in section 8. + +This driver is supporting **only** the CSI2-A/B interfaces for now. + +It makes use of the Media Controller framework [#f2]_, and inherited most of the +code from OMAP3 ISP driver (found under drivers/media/platform/omap3isp/\*), +except that it doesn't need an IOMMU now for ISS buffers memory mapping. + +Supports usage of MMAP buffers only (for now). + +Tested platforms +---------------- + +- OMAP4430SDP, w/ ES2.1 GP & SEVM4430-CAM-V1-0 (Contains IMX060 & OV5640, in + which only the last one is supported, outputting YUV422 frames). + +- TI Blaze MDP, w/ OMAP4430 ES2.2 EMU (Contains 1 IMX060 & 2 OV5650 sensors, in + which only the OV5650 are supported, outputting RAW10 frames). + +- PandaBoard, Rev. A2, w/ OMAP4430 ES2.1 GP & OV adapter board, tested with + following sensors: + * OV5640 + * OV5650 + +- Tested on mainline kernel: + + http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=summary + + Tag: v3.3 (commit c16fa4f2ad19908a47c63d8fa436a1178438c7e7) + +File list +--------- +drivers/staging/media/omap4iss/ +include/linux/platform_data/media/omap4iss.h + +References +---------- + +.. [#f1] http://focus.ti.com/general/docs/wtbu/wtbudocumentcenter.tsp?navigationId=12037&templateId=6123#62 +.. [#f2] http://lwn.net/Articles/420485/ diff --git a/Documentation/media/v4l-drivers/philips.rst b/Documentation/media/v4l-drivers/philips.rst new file mode 100644 index 000000000..4f68947e6 --- /dev/null +++ b/Documentation/media/v4l-drivers/philips.rst @@ -0,0 +1,245 @@ +Philips webcams (pwc driver) +============================ + +This file contains some additional information for the Philips and OEM webcams. +E-mail: webcam@smcc.demon.nl Last updated: 2004-01-19 +Site: http://www.smcc.demon.nl/webcam/ + +As of this moment, the following cameras are supported: + + * Philips PCA645 + * Philips PCA646 + * Philips PCVC675 + * Philips PCVC680 + * Philips PCVC690 + * Philips PCVC720/40 + * Philips PCVC730 + * Philips PCVC740 + * Philips PCVC750 + * Askey VC010 + * Creative Labs Webcam 5 + * Creative Labs Webcam Pro Ex + * Logitech QuickCam 3000 Pro + * Logitech QuickCam 4000 Pro + * Logitech QuickCam Notebook Pro + * Logitech QuickCam Zoom + * Logitech QuickCam Orbit + * Logitech QuickCam Sphere + * Samsung MPC-C10 + * Samsung MPC-C30 + * Sotec Afina Eye + * AME CU-001 + * Visionite VCS-UM100 + * Visionite VCS-UC300 + +The main webpage for the Philips driver is at the address above. It contains +a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin +contains decompression routines that allow you to use higher image sizes and +framerates; in addition the webcam uses less bandwidth on the USB bus (handy +if you want to run more than 1 camera simultaneously). These routines fall +under a NDA, and may therefore not be distributed as source; however, its use +is completely optional. + +You can build this code either into your kernel, or as a module. I recommend +the latter, since it makes troubleshooting a lot easier. The built-in +microphone is supported through the USB Audio class. + +When you load the module you can set some default settings for the +camera; some programs depend on a particular image-size or -format and +don't know how to set it properly in the driver. The options are: + +size + Can be one of 'sqcif', 'qsif', 'qcif', 'sif', 'cif' or + 'vga', for an image size of resp. 128x96, 160x120, 176x144, + 320x240, 352x288 and 640x480 (of course, only for those cameras that + support these resolutions). + +fps + Specifies the desired framerate. Is an integer in the range of 4-30. + +fbufs + This parameter specifies the number of internal buffers to use for storing + frames from the cam. This will help if the process that reads images from + the cam is a bit slow or momentarily busy. However, on slow machines it + only introduces lag, so choose carefully. The default is 3, which is + reasonable. You can set it between 2 and 5. + +mbufs + This is an integer between 1 and 10. It will tell the module the number of + buffers to reserve for mmap(), VIDIOCCGMBUF, VIDIOCMCAPTURE and friends. + The default is 2, which is adequate for most applications (double + buffering). + + Should you experience a lot of 'Dumping frame...' messages during + grabbing with a tool that uses mmap(), you might want to increase if. + However, it doesn't really buffer images, it just gives you a bit more + slack when your program is behind. But you need a multi-threaded or + forked program to really take advantage of these buffers. + + The absolute maximum is 10, but don't set it too high! Every buffer takes + up 460 KB of RAM, so unless you have a lot of memory setting this to + something more than 4 is an absolute waste. This memory is only + allocated during open(), so nothing is wasted when the camera is not in + use. + +power_save + When power_save is enabled (set to 1), the module will try to shut down + the cam on close() and re-activate on open(). This will save power and + turn off the LED. Not all cameras support this though (the 645 and 646 + don't have power saving at all), and some models don't work either (they + will shut down, but never wake up). Consider this experimental. By + default this option is disabled. + +compression (only useful with the plugin) + With this option you can control the compression factor that the camera + uses to squeeze the image through the USB bus. You can set the + parameter between 0 and 3:: + + 0 = prefer uncompressed images; if the requested mode is not available + in an uncompressed format, the driver will silently switch to low + compression. + 1 = low compression. + 2 = medium compression. + 3 = high compression. + + High compression takes less bandwidth of course, but it could also + introduce some unwanted artefacts. The default is 2, medium compression. + See the FAQ on the website for an overview of which modes require + compression. + + The compression parameter does not apply to the 645 and 646 cameras + and OEM models derived from those (only a few). Most cams honour this + parameter. + +leds + This settings takes 2 integers, that define the on/off time for the LED + (in milliseconds). One of the interesting things that you can do with + this is let the LED blink while the camera is in use. This:: + + leds=500,500 + + will blink the LED once every second. But with:: + + leds=0,0 + + the LED never goes on, making it suitable for silent surveillance. + + By default the camera's LED is on solid while in use, and turned off + when the camera is not used anymore. + + This parameter works only with the ToUCam range of cameras (720, 730, 740, + 750) and OEMs. For other cameras this command is silently ignored, and + the LED cannot be controlled. + + Finally: this parameters does not take effect UNTIL the first time you + open the camera device. Until then, the LED remains on. + +dev_hint + A long standing problem with USB devices is their dynamic nature: you + never know what device a camera gets assigned; it depends on module load + order, the hub configuration, the order in which devices are plugged in, + and the phase of the moon (i.e. it can be random). With this option you + can give the driver a hint as to what video device node (/dev/videoX) it + should use with a specific camera. This is also handy if you have two + cameras of the same model. + + A camera is specified by its type (the number from the camera model, + like PCA645, PCVC750VC, etc) and optionally the serial number (visible + in /sys/kernel/debug/usb/devices). A hint consists of a string with the + following format:: + + [type[.serialnumber]:]node + + The square brackets mean that both the type and the serialnumber are + optional, but a serialnumber cannot be specified without a type (which + would be rather pointless). The serialnumber is separated from the type + by a '.'; the node number by a ':'. + + This somewhat cryptic syntax is best explained by a few examples:: + + dev_hint=3,5 The first detected cam gets assigned + /dev/video3, the second /dev/video5. Any + other cameras will get the first free + available slot (see below). + + dev_hint=645:1,680:2 The PCA645 camera will get /dev/video1, + and a PCVC680 /dev/video2. + + dev_hint=645.0123:3,645.4567:0 The PCA645 camera with serialnumber + 0123 goes to /dev/video3, the same + camera model with the 4567 serial + gets /dev/video0. + + dev_hint=750:1,4,5,6 The PCVC750 camera will get /dev/video1, the + next 3 Philips cams will use /dev/video4 + through /dev/video6. + + Some points worth knowing: + + - Serialnumbers are case sensitive and must be written full, including + leading zeroes (it's treated as a string). + - If a device node is already occupied, registration will fail and + the webcam is not available. + - You can have up to 64 video devices; be sure to make enough device + nodes in /dev if you want to spread the numbers. + After /dev/video9 comes /dev/video10 (not /dev/videoA). + - If a camera does not match any dev_hint, it will simply get assigned + the first available device node, just as it used to be. + +trace + In order to better detect problems, it is now possible to turn on a + 'trace' of some of the calls the module makes; it logs all items in your + kernel log at debug level. + + The trace variable is a bitmask; each bit represents a certain feature. + If you want to trace something, look up the bit value(s) in the table + below, add the values together and supply that to the trace variable. + + ====== ======= ================================================ ======= + Value Value Description Default + (dec) (hex) + ====== ======= ================================================ ======= + 1 0x1 Module initialization; this will log messages On + while loading and unloading the module + + 2 0x2 probe() and disconnect() traces On + + 4 0x4 Trace open() and close() calls Off + + 8 0x8 read(), mmap() and associated ioctl() calls Off + + 16 0x10 Memory allocation of buffers, etc. Off + + 32 0x20 Showing underflow, overflow and Dumping frame On + messages + + 64 0x40 Show viewport and image sizes Off + + 128 0x80 PWCX debugging Off + ====== ======= ================================================ ======= + + For example, to trace the open() & read() functions, sum 8 + 4 = 12, + so you would supply trace=12 during insmod or modprobe. If + you want to turn the initialization and probing tracing off, set trace=0. + The default value for trace is 35 (0x23). + + + +Example:: + + # modprobe pwc size=cif fps=15 power_save=1 + +The fbufs, mbufs and trace parameters are global and apply to all connected +cameras. Each camera has its own set of buffers. + +size and fps only specify defaults when you open() the device; this is to +accommodate some tools that don't set the size. You can change these +settings after open() with the Video4Linux ioctl() calls. The default of +defaults is QCIF size at 10 fps. + +The compression parameter is semiglobal; it sets the initial compression +preference for all camera's, but this parameter can be set per camera with +the VIDIOCPWCSCQUAL ioctl() call. + +All parameters are optional. + diff --git a/Documentation/media/v4l-drivers/pvrusb2.rst b/Documentation/media/v4l-drivers/pvrusb2.rst new file mode 100644 index 000000000..dc0e72d94 --- /dev/null +++ b/Documentation/media/v4l-drivers/pvrusb2.rst @@ -0,0 +1,200 @@ +The pvrusb2 driver +================== + +Author: Mike Isely <isely@pobox.com> + +Background +---------- + +This driver is intended for the "Hauppauge WinTV PVR USB 2.0", which +is a USB 2.0 hosted TV Tuner. This driver is a work in progress. +Its history started with the reverse-engineering effort by Björn +Danielsson <pvrusb2@dax.nu> whose web page can be found here: +http://pvrusb2.dax.nu/ + +From there Aurelien Alleaume <slts@free.fr> began an effort to +create a video4linux compatible driver. I began with Aurelien's +last known snapshot and evolved the driver to the state it is in +here. + +More information on this driver can be found at: +http://www.isely.net/pvrusb2.html + + +This driver has a strong separation of layers. They are very +roughly: + +1. Low level wire-protocol implementation with the device. + +2. I2C adaptor implementation and corresponding I2C client drivers + implemented elsewhere in V4L. + +3. High level hardware driver implementation which coordinates all + activities that ensure correct operation of the device. + +4. A "context" layer which manages instancing of driver, setup, + tear-down, arbitration, and interaction with high level + interfaces appropriately as devices are hotplugged in the + system. + +5. High level interfaces which glue the driver to various published + Linux APIs (V4L, sysfs, maybe DVB in the future). + +The most important shearing layer is between the top 2 layers. A +lot of work went into the driver to ensure that any kind of +conceivable API can be laid on top of the core driver. (Yes, the +driver internally leverages V4L to do its work but that really has +nothing to do with the API published by the driver to the outside +world.) The architecture allows for different APIs to +simultaneously access the driver. I have a strong sense of fairness +about APIs and also feel that it is a good design principle to keep +implementation and interface isolated from each other. Thus while +right now the V4L high level interface is the most complete, the +sysfs high level interface will work equally well for similar +functions, and there's no reason I see right now why it shouldn't be +possible to produce a DVB high level interface that can sit right +alongside V4L. + +Building +-------- + +To build these modules essentially amounts to just running "Make", +but you need the kernel source tree nearby and you will likely also +want to set a few controlling environment variables first in order +to link things up with that source tree. Please see the Makefile +here for comments that explain how to do that. + +Source file list / functional overview +-------------------------------------- + +(Note: The term "module" used below generally refers to loosely +defined functional units within the pvrusb2 driver and bears no +relation to the Linux kernel's concept of a loadable module.) + +pvrusb2-audio.[ch] - This is glue logic that resides between this + driver and the msp3400.ko I2C client driver (which is found + elsewhere in V4L). + +pvrusb2-context.[ch] - This module implements the context for an + instance of the driver. Everything else eventually ties back to + or is otherwise instanced within the data structures implemented + here. Hotplugging is ultimately coordinated here. All high level + interfaces tie into the driver through this module. This module + helps arbitrate each interface's access to the actual driver core, + and is designed to allow concurrent access through multiple + instances of multiple interfaces (thus you can for example change + the tuner's frequency through sysfs while simultaneously streaming + video through V4L out to an instance of mplayer). + +pvrusb2-debug.h - This header defines a printk() wrapper and a mask + of debugging bit definitions for the various kinds of debug + messages that can be enabled within the driver. + +pvrusb2-debugifc.[ch] - This module implements a crude command line + oriented debug interface into the driver. Aside from being part + of the process for implementing manual firmware extraction (see + the pvrusb2 web site mentioned earlier), probably I'm the only one + who has ever used this. It is mainly a debugging aid. + +pvrusb2-eeprom.[ch] - This is glue logic that resides between this + driver the tveeprom.ko module, which is itself implemented + elsewhere in V4L. + +pvrusb2-encoder.[ch] - This module implements all protocol needed to + interact with the Conexant mpeg2 encoder chip within the pvrusb2 + device. It is a crude echo of corresponding logic in ivtv, + however the design goals (strict isolation) and physical layer + (proxy through USB instead of PCI) are enough different that this + implementation had to be completely different. + +pvrusb2-hdw-internal.h - This header defines the core data structure + in the driver used to track ALL internal state related to control + of the hardware. Nobody outside of the core hardware-handling + modules should have any business using this header. All external + access to the driver should be through one of the high level + interfaces (e.g. V4L, sysfs, etc), and in fact even those high + level interfaces are restricted to the API defined in + pvrusb2-hdw.h and NOT this header. + +pvrusb2-hdw.h - This header defines the full internal API for + controlling the hardware. High level interfaces (e.g. V4L, sysfs) + will work through here. + +pvrusb2-hdw.c - This module implements all the various bits of logic + that handle overall control of a specific pvrusb2 device. + (Policy, instantiation, and arbitration of pvrusb2 devices fall + within the jurisdiction of pvrusb-context not here). + +pvrusb2-i2c-chips-\*.c - These modules implement the glue logic to + tie together and configure various I2C modules as they attach to + the I2C bus. There are two versions of this file. The "v4l2" + version is intended to be used in-tree alongside V4L, where we + implement just the logic that makes sense for a pure V4L + environment. The "all" version is intended for use outside of + V4L, where we might encounter other possibly "challenging" modules + from ivtv or older kernel snapshots (or even the support modules + in the standalone snapshot). + +pvrusb2-i2c-cmd-v4l1.[ch] - This module implements generic V4L1 + compatible commands to the I2C modules. It is here where state + changes inside the pvrusb2 driver are translated into V4L1 + commands that are in turn send to the various I2C modules. + +pvrusb2-i2c-cmd-v4l2.[ch] - This module implements generic V4L2 + compatible commands to the I2C modules. It is here where state + changes inside the pvrusb2 driver are translated into V4L2 + commands that are in turn send to the various I2C modules. + +pvrusb2-i2c-core.[ch] - This module provides an implementation of a + kernel-friendly I2C adaptor driver, through which other external + I2C client drivers (e.g. msp3400, tuner, lirc) may connect and + operate corresponding chips within the pvrusb2 device. It is + through here that other V4L modules can reach into this driver to + operate specific pieces (and those modules are in turn driven by + glue logic which is coordinated by pvrusb2-hdw, doled out by + pvrusb2-context, and then ultimately made available to users + through one of the high level interfaces). + +pvrusb2-io.[ch] - This module implements a very low level ring of + transfer buffers, required in order to stream data from the + device. This module is *very* low level. It only operates the + buffers and makes no attempt to define any policy or mechanism for + how such buffers might be used. + +pvrusb2-ioread.[ch] - This module layers on top of pvrusb2-io.[ch] + to provide a streaming API usable by a read() system call style of + I/O. Right now this is the only layer on top of pvrusb2-io.[ch], + however the underlying architecture here was intended to allow for + other styles of I/O to be implemented with additional modules, like + mmap()'ed buffers or something even more exotic. + +pvrusb2-main.c - This is the top level of the driver. Module level + and USB core entry points are here. This is our "main". + +pvrusb2-sysfs.[ch] - This is the high level interface which ties the + pvrusb2 driver into sysfs. Through this interface you can do + everything with the driver except actually stream data. + +pvrusb2-tuner.[ch] - This is glue logic that resides between this + driver and the tuner.ko I2C client driver (which is found + elsewhere in V4L). + +pvrusb2-util.h - This header defines some common macros used + throughout the driver. These macros are not really specific to + the driver, but they had to go somewhere. + +pvrusb2-v4l2.[ch] - This is the high level interface which ties the + pvrusb2 driver into video4linux. It is through here that V4L + applications can open and operate the driver in the usual V4L + ways. Note that **ALL** V4L functionality is published only + through here and nowhere else. + +pvrusb2-video-\*.[ch] - This is glue logic that resides between this + driver and the saa711x.ko I2C client driver (which is found + elsewhere in V4L). Note that saa711x.ko used to be known as + saa7115.ko in ivtv. There are two versions of this; one is + selected depending on the particular saa711[5x].ko that is found. + +pvrusb2.h - This header contains compile time tunable parameters + (and at the moment the driver has very little that needs to be + tuned). diff --git a/Documentation/media/v4l-drivers/pxa_camera.rst b/Documentation/media/v4l-drivers/pxa_camera.rst new file mode 100644 index 000000000..554f91b04 --- /dev/null +++ b/Documentation/media/v4l-drivers/pxa_camera.rst @@ -0,0 +1,192 @@ +PXA-Camera Host Driver +====================== + +Author: Robert Jarzmik <robert.jarzmik@free.fr> + +Constraints +----------- + +a) Image size for YUV422P format + All YUV422P images are enforced to have width x height % 16 = 0. + This is due to DMA constraints, which transfers only planes of 8 byte + multiples. + + +Global video workflow +--------------------- + +a) QCI stopped + Initialy, the QCI interface is stopped. + When a buffer is queued (pxa_videobuf_ops->buf_queue), the QCI starts. + +b) QCI started + More buffers can be queued while the QCI is started without halting the + capture. The new buffers are "appended" at the tail of the DMA chain, and + smoothly captured one frame after the other. + + Once a buffer is filled in the QCI interface, it is marked as "DONE" and + removed from the active buffers list. It can be then requeud or dequeued by + userland application. + + Once the last buffer is filled in, the QCI interface stops. + +c) Capture global finite state machine schema + +.. code-block:: none + + +----+ +---+ +----+ + | DQ | | Q | | DQ | + | v | v | v + +-----------+ +------------------------+ + | STOP | | Wait for capture start | + +-----------+ Q +------------------------+ + +-> | QCI: stop | ------------------> | QCI: run | <------------+ + | | DMA: stop | | DMA: stop | | + | +-----------+ +-----> +------------------------+ | + | / | | + | / +---+ +----+ | | + |capture list empty / | Q | | DQ | | QCI Irq EOF | + | / | v | v v | + | +--------------------+ +----------------------+ | + | | DMA hotlink missed | | Capture running | | + | +--------------------+ +----------------------+ | + | | QCI: run | +-----> | QCI: run | <-+ | + | | DMA: stop | / | DMA: run | | | + | +--------------------+ / +----------------------+ | Other | + | ^ /DMA still | | channels | + | | capture list / running | DMA Irq End | not | + | | not empty / | | finished | + | | / v | yet | + | +----------------------+ +----------------------+ | | + | | Videobuf released | | Channel completed | | | + | +----------------------+ +----------------------+ | | + +-- | QCI: run | | QCI: run | --+ | + | DMA: run | | DMA: run | | + +----------------------+ +----------------------+ | + ^ / | | + | no overrun / | overrun | + | / v | + +--------------------+ / +----------------------+ | + | Frame completed | / | Frame overran | | + +--------------------+ <-----+ +----------------------+ restart frame | + | QCI: run | | QCI: stop | --------------+ + | DMA: run | | DMA: stop | + +--------------------+ +----------------------+ + + Legend: - each box is a FSM state + - each arrow is the condition to transition to another state + - an arrow with a comment is a mandatory transition (no condition) + - arrow "Q" means : a buffer was enqueued + - arrow "DQ" means : a buffer was dequeued + - "QCI: stop" means the QCI interface is not enabled + - "DMA: stop" means all 3 DMA channels are stopped + - "DMA: run" means at least 1 DMA channel is still running + +DMA usage +--------- + +a) DMA flow + - first buffer queued for capture + Once a first buffer is queued for capture, the QCI is started, but data + transfer is not started. On "End Of Frame" interrupt, the irq handler + starts the DMA chain. + - capture of one videobuffer + The DMA chain starts transferring data into videobuffer RAM pages. + When all pages are transferred, the DMA irq is raised on "ENDINTR" status + - finishing one videobuffer + The DMA irq handler marks the videobuffer as "done", and removes it from + the active running queue + Meanwhile, the next videobuffer (if there is one), is transferred by DMA + - finishing the last videobuffer + On the DMA irq of the last videobuffer, the QCI is stopped. + +b) DMA prepared buffer will have this structure + +.. code-block:: none + + +------------+-----+---------------+-----------------+ + | desc-sg[0] | ... | desc-sg[last] | finisher/linker | + +------------+-----+---------------+-----------------+ + +This structure is pointed by dma->sg_cpu. +The descriptors are used as follows: + +- desc-sg[i]: i-th descriptor, transferring the i-th sg + element to the video buffer scatter gather +- finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN +- linker: has ddadr= desc-sg[0] of next video buffer, dcmd=0 + +For the next schema, let's assume d0=desc-sg[0] .. dN=desc-sg[N], +"f" stands for finisher and "l" for linker. +A typical running chain is : + +.. code-block:: none + + Videobuffer 1 Videobuffer 2 + +---------+----+---+ +----+----+----+---+ + | d0 | .. | dN | l | | d0 | .. | dN | f | + +---------+----+-|-+ ^----+----+----+---+ + | | + +----+ + +After the chaining is finished, the chain looks like : + +.. code-block:: none + + Videobuffer 1 Videobuffer 2 Videobuffer 3 + +---------+----+---+ +----+----+----+---+ +----+----+----+---+ + | d0 | .. | dN | l | | d0 | .. | dN | l | | d0 | .. | dN | f | + +---------+----+-|-+ ^----+----+----+-|-+ ^----+----+----+---+ + | | | | + +----+ +----+ + new_link + +c) DMA hot chaining timeslice issue + +As DMA chaining is done while DMA _is_ running, the linking may be done +while the DMA jumps from one Videobuffer to another. On the schema, that +would be a problem if the following sequence is encountered : + +- DMA chain is Videobuffer1 + Videobuffer2 +- pxa_videobuf_queue() is called to queue Videobuffer3 +- DMA controller finishes Videobuffer2, and DMA stops + +.. code-block:: none + + => + Videobuffer 1 Videobuffer 2 + +---------+----+---+ +----+----+----+---+ + | d0 | .. | dN | l | | d0 | .. | dN | f | + +---------+----+-|-+ ^----+----+----+-^-+ + | | | + +----+ +-- DMA DDADR loads DDADR_STOP + +- pxa_dma_add_tail_buf() is called, the Videobuffer2 "finisher" is + replaced by a "linker" to Videobuffer3 (creation of new_link) +- pxa_videobuf_queue() finishes +- the DMA irq handler is called, which terminates Videobuffer2 +- Videobuffer3 capture is not scheduled on DMA chain (as it stopped !!!) + +.. code-block:: none + + Videobuffer 1 Videobuffer 2 Videobuffer 3 + +---------+----+---+ +----+----+----+---+ +----+----+----+---+ + | d0 | .. | dN | l | | d0 | .. | dN | l | | d0 | .. | dN | f | + +---------+----+-|-+ ^----+----+----+-|-+ ^----+----+----+---+ + | | | | + +----+ +----+ + new_link + DMA DDADR still is DDADR_STOP + +- pxa_camera_check_link_miss() is called + This checks if the DMA is finished and a buffer is still on the + pcdev->capture list. If that's the case, the capture will be restarted, + and Videobuffer3 is scheduled on DMA chain. +- the DMA irq handler finishes + +.. note:: + + If DMA stops just after pxa_camera_check_link_miss() reads DDADR() + value, we have the guarantee that the DMA irq handler will be called back + when the DMA will finish the buffer, and pxa_camera_check_link_miss() will + be called again, to reschedule Videobuffer3. diff --git a/Documentation/media/v4l-drivers/qcom_camss.rst b/Documentation/media/v4l-drivers/qcom_camss.rst new file mode 100644 index 000000000..f27c8df20 --- /dev/null +++ b/Documentation/media/v4l-drivers/qcom_camss.rst @@ -0,0 +1,183 @@ +.. include:: <isonum.txt> + +Qualcomm Camera Subsystem driver +================================ + +Introduction +------------ + +This file documents the Qualcomm Camera Subsystem driver located under +drivers/media/platform/qcom/camss. + +The current version of the driver supports the Camera Subsystem found on +Qualcomm MSM8916/APQ8016 and MSM8996/APQ8096 processors. + +The driver implements V4L2, Media controller and V4L2 subdev interfaces. +Camera sensor using V4L2 subdev interface in the kernel is supported. + +The driver is implemented using as a reference the Qualcomm Camera Subsystem +driver for Android as found in Code Aurora [#f1]_ [#f2]_. + + +Qualcomm Camera Subsystem hardware +---------------------------------- + +The Camera Subsystem hardware found on 8x16 / 8x96 processors and supported by +the driver consists of: + +- 2 / 3 CSIPHY modules. They handle the Physical layer of the CSI2 receivers. + A separate camera sensor can be connected to each of the CSIPHY module; +- 2 / 4 CSID (CSI Decoder) modules. They handle the Protocol and Application + layer of the CSI2 receivers. A CSID can decode data stream from any of the + CSIPHY. Each CSID also contains a TG (Test Generator) block which can generate + artificial input data for test purposes; +- ISPIF (ISP Interface) module. Handles the routing of the data streams from + the CSIDs to the inputs of the VFE; +- 1 / 2 VFE (Video Front End) module(s). Contain a pipeline of image processing + hardware blocks. The VFE has different input interfaces. The PIX (Pixel) input + interface feeds the input data to the image processing pipeline. The image + processing pipeline contains also a scale and crop module at the end. Three + RDI (Raw Dump Interface) input interfaces bypass the image processing + pipeline. The VFE also contains the AXI bus interface which writes the output + data to memory. + + +Supported functionality +----------------------- + +The current version of the driver supports: + +- Input from camera sensor via CSIPHY; +- Generation of test input data by the TG in CSID; +- RDI interface of VFE + + - Raw dump of the input data to memory. + + Supported formats: + + - YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2 - V4L2_PIX_FMT_YUYV / + V4L2_PIX_FMT_UYVY / V4L2_PIX_FMT_YVYU / V4L2_PIX_FMT_VYUY); + - MIPI RAW8 (8bit Bayer RAW - V4L2_PIX_FMT_SRGGB8 / + V4L2_PIX_FMT_SGRBG8 / V4L2_PIX_FMT_SGBRG8 / V4L2_PIX_FMT_SBGGR8); + - MIPI RAW10 (10bit packed Bayer RAW - V4L2_PIX_FMT_SBGGR10P / + V4L2_PIX_FMT_SGBRG10P / V4L2_PIX_FMT_SGRBG10P / V4L2_PIX_FMT_SRGGB10P / + V4L2_PIX_FMT_Y10P); + - MIPI RAW12 (12bit packed Bayer RAW - V4L2_PIX_FMT_SRGGB12P / + V4L2_PIX_FMT_SGBRG12P / V4L2_PIX_FMT_SGRBG12P / V4L2_PIX_FMT_SRGGB12P). + - (8x96 only) MIPI RAW14 (14bit packed Bayer RAW - V4L2_PIX_FMT_SRGGB14P / + V4L2_PIX_FMT_SGBRG14P / V4L2_PIX_FMT_SGRBG14P / V4L2_PIX_FMT_SRGGB14P). + + - (8x96 only) Format conversion of the input data. + + Supported input formats: + + - MIPI RAW10 (10bit packed Bayer RAW - V4L2_PIX_FMT_SBGGR10P / V4L2_PIX_FMT_Y10P). + + Supported output formats: + + - Plain16 RAW10 (10bit unpacked Bayer RAW - V4L2_PIX_FMT_SBGGR10 / V4L2_PIX_FMT_Y10). + +- PIX interface of VFE + + - Format conversion of the input data. + + Supported input formats: + + - YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2 - V4L2_PIX_FMT_YUYV / + V4L2_PIX_FMT_UYVY / V4L2_PIX_FMT_YVYU / V4L2_PIX_FMT_VYUY). + + Supported output formats: + + - NV12/NV21 (two plane YUV 4:2:0 - V4L2_PIX_FMT_NV12 / V4L2_PIX_FMT_NV21); + - NV16/NV61 (two plane YUV 4:2:2 - V4L2_PIX_FMT_NV16 / V4L2_PIX_FMT_NV61). + - (8x96 only) YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2 - V4L2_PIX_FMT_YUYV / + V4L2_PIX_FMT_UYVY / V4L2_PIX_FMT_YVYU / V4L2_PIX_FMT_VYUY). + + - Scaling support. Configuration of the VFE Encoder Scale module + for downscalling with ratio up to 16x. + + - Cropping support. Configuration of the VFE Encoder Crop module. + +- Concurrent and independent usage of two (8x96: three) data inputs - + could be camera sensors and/or TG. + + +Driver Architecture and Design +------------------------------ + +The driver implements the V4L2 subdev interface. With the goal to model the +hardware links between the modules and to expose a clean, logical and usable +interface, the driver is split into V4L2 sub-devices as follows (8x16 / 8x96): + +- 2 / 3 CSIPHY sub-devices - each CSIPHY is represented by a single sub-device; +- 2 / 4 CSID sub-devices - each CSID is represented by a single sub-device; +- 2 / 4 ISPIF sub-devices - ISPIF is represented by a number of sub-devices + equal to the number of CSID sub-devices; +- 4 / 8 VFE sub-devices - VFE is represented by a number of sub-devices equal to + the number of the input interfaces (3 RDI and 1 PIX for each VFE). + +The considerations to split the driver in this particular way are as follows: + +- representing CSIPHY and CSID modules by a separate sub-device for each module + allows to model the hardware links between these modules; +- representing VFE by a separate sub-devices for each input interface allows + to use the input interfaces concurently and independently as this is + supported by the hardware; +- representing ISPIF by a number of sub-devices equal to the number of CSID + sub-devices allows to create linear media controller pipelines when using two + cameras simultaneously. This avoids branches in the pipelines which otherwise + will require a) userspace and b) media framework (e.g. power on/off + operations) to make assumptions about the data flow from a sink pad to a + source pad on a single media entity. + +Each VFE sub-device is linked to a separate video device node. + +The media controller pipeline graph is as follows (with connected two / three +OV5645 camera sensors): + +.. _qcom_camss_graph: + +.. kernel-figure:: qcom_camss_graph.dot + :alt: qcom_camss_graph.dot + :align: center + + Media pipeline graph 8x16 + +.. kernel-figure:: qcom_camss_8x96_graph.dot + :alt: qcom_camss_8x96_graph.dot + :align: center + + Media pipeline graph 8x96 + + +Implementation +-------------- + +Runtime configuration of the hardware (updating settings while streaming) is +not required to implement the currently supported functionality. The complete +configuration on each hardware module is applied on STREAMON ioctl based on +the current active media links, formats and controls set. + +The output size of the scaler module in the VFE is configured with the actual +compose selection rectangle on the sink pad of the 'msm_vfe0_pix' entity. + +The crop output area of the crop module in the VFE is configured with the actual +crop selection rectangle on the source pad of the 'msm_vfe0_pix' entity. + + +Documentation +------------- + +APQ8016 Specification: +https://developer.qualcomm.com/download/sd410/snapdragon-410-processor-device-specification.pdf +Referenced 2016-11-24. + +APQ8096 Specification: +https://developer.qualcomm.com/download/sd820e/qualcomm-snapdragon-820e-processor-apq8096sge-device-specification.pdf +Referenced 2018-06-22. + +References +---------- + +.. [#f1] https://source.codeaurora.org/quic/la/kernel/msm-3.10/ +.. [#f2] https://source.codeaurora.org/quic/la/kernel/msm-3.18/ diff --git a/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot b/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot new file mode 100644 index 000000000..de34f0a7a --- /dev/null +++ b/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot @@ -0,0 +1,104 @@ +digraph board { + rankdir=TB + n00000001 [label="{{<port0> 0} | msm_csiphy0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000001:port1 -> n0000000a:port0 [style=dashed] + n00000001:port1 -> n0000000d:port0 [style=dashed] + n00000001:port1 -> n00000010:port0 [style=dashed] + n00000001:port1 -> n00000013:port0 [style=dashed] + n00000004 [label="{{<port0> 0} | msm_csiphy1\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000004:port1 -> n0000000a:port0 [style=dashed] + n00000004:port1 -> n0000000d:port0 [style=dashed] + n00000004:port1 -> n00000010:port0 [style=dashed] + n00000004:port1 -> n00000013:port0 [style=dashed] + n00000007 [label="{{<port0> 0} | msm_csiphy2\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000007:port1 -> n0000000a:port0 [style=dashed] + n00000007:port1 -> n0000000d:port0 [style=dashed] + n00000007:port1 -> n00000010:port0 [style=dashed] + n00000007:port1 -> n00000013:port0 [style=dashed] + n0000000a [label="{{<port0> 0} | msm_csid0\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000000a:port1 -> n00000016:port0 [style=dashed] + n0000000a:port1 -> n00000019:port0 [style=dashed] + n0000000a:port1 -> n0000001c:port0 [style=dashed] + n0000000a:port1 -> n0000001f:port0 [style=dashed] + n0000000d [label="{{<port0> 0} | msm_csid1\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000000d:port1 -> n00000016:port0 [style=dashed] + n0000000d:port1 -> n00000019:port0 [style=dashed] + n0000000d:port1 -> n0000001c:port0 [style=dashed] + n0000000d:port1 -> n0000001f:port0 [style=dashed] + n00000010 [label="{{<port0> 0} | msm_csid2\n/dev/v4l-subdev5 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000010:port1 -> n00000016:port0 [style=dashed] + n00000010:port1 -> n00000019:port0 [style=dashed] + n00000010:port1 -> n0000001c:port0 [style=dashed] + n00000010:port1 -> n0000001f:port0 [style=dashed] + n00000013 [label="{{<port0> 0} | msm_csid3\n/dev/v4l-subdev6 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000013:port1 -> n00000016:port0 [style=dashed] + n00000013:port1 -> n00000019:port0 [style=dashed] + n00000013:port1 -> n0000001c:port0 [style=dashed] + n00000013:port1 -> n0000001f:port0 [style=dashed] + n00000016 [label="{{<port0> 0} | msm_ispif0\n/dev/v4l-subdev7 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000016:port1 -> n00000022:port0 [style=dashed] + n00000016:port1 -> n0000002b:port0 [style=dashed] + n00000016:port1 -> n00000034:port0 [style=dashed] + n00000016:port1 -> n0000003d:port0 [style=dashed] + n00000016:port1 -> n00000046:port0 [style=dashed] + n00000016:port1 -> n0000004f:port0 [style=dashed] + n00000016:port1 -> n00000058:port0 [style=dashed] + n00000016:port1 -> n00000061:port0 [style=dashed] + n00000019 [label="{{<port0> 0} | msm_ispif1\n/dev/v4l-subdev8 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000019:port1 -> n00000022:port0 [style=dashed] + n00000019:port1 -> n0000002b:port0 [style=dashed] + n00000019:port1 -> n00000034:port0 [style=dashed] + n00000019:port1 -> n0000003d:port0 [style=dashed] + n00000019:port1 -> n00000046:port0 [style=dashed] + n00000019:port1 -> n0000004f:port0 [style=dashed] + n00000019:port1 -> n00000058:port0 [style=dashed] + n00000019:port1 -> n00000061:port0 [style=dashed] + n0000001c [label="{{<port0> 0} | msm_ispif2\n/dev/v4l-subdev9 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000001c:port1 -> n00000022:port0 [style=dashed] + n0000001c:port1 -> n0000002b:port0 [style=dashed] + n0000001c:port1 -> n00000034:port0 [style=dashed] + n0000001c:port1 -> n0000003d:port0 [style=dashed] + n0000001c:port1 -> n00000046:port0 [style=dashed] + n0000001c:port1 -> n0000004f:port0 [style=dashed] + n0000001c:port1 -> n00000058:port0 [style=dashed] + n0000001c:port1 -> n00000061:port0 [style=dashed] + n0000001f [label="{{<port0> 0} | msm_ispif3\n/dev/v4l-subdev10 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000001f:port1 -> n00000022:port0 [style=dashed] + n0000001f:port1 -> n0000002b:port0 [style=dashed] + n0000001f:port1 -> n00000034:port0 [style=dashed] + n0000001f:port1 -> n0000003d:port0 [style=dashed] + n0000001f:port1 -> n00000046:port0 [style=dashed] + n0000001f:port1 -> n0000004f:port0 [style=dashed] + n0000001f:port1 -> n00000058:port0 [style=dashed] + n0000001f:port1 -> n00000061:port0 [style=dashed] + n00000022 [label="{{<port0> 0} | msm_vfe0_rdi0\n/dev/v4l-subdev11 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000022:port1 -> n00000025 [style=bold] + n00000025 [label="msm_vfe0_video0\n/dev/video0", shape=box, style=filled, fillcolor=yellow] + n0000002b [label="{{<port0> 0} | msm_vfe0_rdi1\n/dev/v4l-subdev12 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000002b:port1 -> n0000002e [style=bold] + n0000002e [label="msm_vfe0_video1\n/dev/video1", shape=box, style=filled, fillcolor=yellow] + n00000034 [label="{{<port0> 0} | msm_vfe0_rdi2\n/dev/v4l-subdev13 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000034:port1 -> n00000037 [style=bold] + n00000037 [label="msm_vfe0_video2\n/dev/video2", shape=box, style=filled, fillcolor=yellow] + n0000003d [label="{{<port0> 0} | msm_vfe0_pix\n/dev/v4l-subdev14 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000003d:port1 -> n00000040 [style=bold] + n00000040 [label="msm_vfe0_video3\n/dev/video3", shape=box, style=filled, fillcolor=yellow] + n00000046 [label="{{<port0> 0} | msm_vfe1_rdi0\n/dev/v4l-subdev15 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000046:port1 -> n00000049 [style=bold] + n00000049 [label="msm_vfe1_video0\n/dev/video4", shape=box, style=filled, fillcolor=yellow] + n0000004f [label="{{<port0> 0} | msm_vfe1_rdi1\n/dev/v4l-subdev16 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000004f:port1 -> n00000052 [style=bold] + n00000052 [label="msm_vfe1_video1\n/dev/video5", shape=box, style=filled, fillcolor=yellow] + n00000058 [label="{{<port0> 0} | msm_vfe1_rdi2\n/dev/v4l-subdev17 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000058:port1 -> n0000005b [style=bold] + n0000005b [label="msm_vfe1_video2\n/dev/video6", shape=box, style=filled, fillcolor=yellow] + n00000061 [label="{{<port0> 0} | msm_vfe1_pix\n/dev/v4l-subdev18 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000061:port1 -> n00000064 [style=bold] + n00000064 [label="msm_vfe1_video3\n/dev/video7", shape=box, style=filled, fillcolor=yellow] + n000000e2 [label="{{} | ov5645 3-0039\n/dev/v4l-subdev19 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green] + n000000e2:port0 -> n00000004:port0 [style=bold] + n000000e4 [label="{{} | ov5645 3-003a\n/dev/v4l-subdev20 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green] + n000000e4:port0 -> n00000007:port0 [style=bold] + n000000e6 [label="{{} | ov5645 3-003b\n/dev/v4l-subdev21 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green] + n000000e6:port0 -> n00000001:port0 [style=bold] +} diff --git a/Documentation/media/v4l-drivers/qcom_camss_graph.dot b/Documentation/media/v4l-drivers/qcom_camss_graph.dot new file mode 100644 index 000000000..827fc7112 --- /dev/null +++ b/Documentation/media/v4l-drivers/qcom_camss_graph.dot @@ -0,0 +1,41 @@ +digraph board { + rankdir=TB + n00000001 [label="{{<port0> 0} | msm_csiphy0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000001:port1 -> n00000007:port0 [style=dashed] + n00000001:port1 -> n0000000a:port0 [style=dashed] + n00000004 [label="{{<port0> 0} | msm_csiphy1\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000004:port1 -> n00000007:port0 [style=dashed] + n00000004:port1 -> n0000000a:port0 [style=dashed] + n00000007 [label="{{<port0> 0} | msm_csid0\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000007:port1 -> n0000000d:port0 [style=dashed] + n00000007:port1 -> n00000010:port0 [style=dashed] + n0000000a [label="{{<port0> 0} | msm_csid1\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000000a:port1 -> n0000000d:port0 [style=dashed] + n0000000a:port1 -> n00000010:port0 [style=dashed] + n0000000d [label="{{<port0> 0} | msm_ispif0\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000000d:port1 -> n00000013:port0 [style=dashed] + n0000000d:port1 -> n0000001c:port0 [style=dashed] + n0000000d:port1 -> n00000025:port0 [style=dashed] + n0000000d:port1 -> n0000002e:port0 [style=dashed] + n00000010 [label="{{<port0> 0} | msm_ispif1\n/dev/v4l-subdev5 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000010:port1 -> n00000013:port0 [style=dashed] + n00000010:port1 -> n0000001c:port0 [style=dashed] + n00000010:port1 -> n00000025:port0 [style=dashed] + n00000010:port1 -> n0000002e:port0 [style=dashed] + n00000013 [label="{{<port0> 0} | msm_vfe0_rdi0\n/dev/v4l-subdev6 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000013:port1 -> n00000016 [style=bold] + n00000016 [label="msm_vfe0_video0\n/dev/video0", shape=box, style=filled, fillcolor=yellow] + n0000001c [label="{{<port0> 0} | msm_vfe0_rdi1\n/dev/v4l-subdev7 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000001c:port1 -> n0000001f [style=bold] + n0000001f [label="msm_vfe0_video1\n/dev/video1", shape=box, style=filled, fillcolor=yellow] + n00000025 [label="{{<port0> 0} | msm_vfe0_rdi2\n/dev/v4l-subdev8 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000025:port1 -> n00000028 [style=bold] + n00000028 [label="msm_vfe0_video2\n/dev/video2", shape=box, style=filled, fillcolor=yellow] + n0000002e [label="{{<port0> 0} | msm_vfe0_pix\n/dev/v4l-subdev9 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000002e:port1 -> n00000031 [style=bold] + n00000031 [label="msm_vfe0_video3\n/dev/video3", shape=box, style=filled, fillcolor=yellow] + n00000057 [label="{{} | ov5645 1-0076\n/dev/v4l-subdev10 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green] + n00000057:port0 -> n00000001:port0 [style=bold] + n00000059 [label="{{} | ov5645 1-0074\n/dev/v4l-subdev11 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green] + n00000059:port0 -> n00000004:port0 [style=bold] +} diff --git a/Documentation/media/v4l-drivers/radiotrack.rst b/Documentation/media/v4l-drivers/radiotrack.rst new file mode 100644 index 000000000..2f6325ebf --- /dev/null +++ b/Documentation/media/v4l-drivers/radiotrack.rst @@ -0,0 +1,166 @@ +The Radiotrack radio driver +=========================== + +Author: Stephen M. Benoit <benoits@servicepro.com> + +Date: Dec 14, 1996 + +ACKNOWLEDGMENTS +---------------- + +This document was made based on 'C' code for Linux from Gideon le Grange +(legrang@active.co.za or legrang@cs.sun.ac.za) in 1994, and elaborations from +Frans Brinkman (brinkman@esd.nl) in 1996. The results reported here are from +experiments that the author performed on his own setup, so your mileage may +vary... I make no guarantees, claims or warranties to the suitability or +validity of this information. No other documentation on the AIMS +Lab (http://www.aimslab.com/) RadioTrack card was made available to the +author. This document is offered in the hopes that it might help users who +want to use the RadioTrack card in an environment other than MS Windows. + +WHY THIS DOCUMENT? +------------------ + +I have a RadioTrack card from back when I ran an MS-Windows platform. After +converting to Linux, I found Gideon le Grange's command-line software for +running the card, and found that it was good! Frans Brinkman made a +comfortable X-windows interface, and added a scanning feature. For hack +value, I wanted to see if the tuner could be tuned beyond the usual FM radio +broadcast band, so I could pick up the audio carriers from North American +broadcast TV channels, situated just below and above the 87.0-109.0 MHz range. +I did not get much success, but I learned about programming ioports under +Linux and gained some insights about the hardware design used for the card. + +So, without further delay, here are the details. + + +PHYSICAL DESCRIPTION +-------------------- + +The RadioTrack card is an ISA 8-bit FM radio card. The radio frequency (RF) +input is simply an antenna lead, and the output is a power audio signal +available through a miniature phone plug. Its RF frequencies of operation are +more or less limited from 87.0 to 109.0 MHz (the commercial FM broadcast +band). Although the registers can be programmed to request frequencies beyond +these limits, experiments did not give promising results. The variable +frequency oscillator (VFO) that demodulates the intermediate frequency (IF) +signal probably has a small range of useful frequencies, and wraps around or +gets clipped beyond the limits mentioned above. + + +CONTROLLING THE CARD WITH IOPORT +-------------------------------- + +The RadioTrack (base) ioport is configurable for 0x30c or 0x20c. Only one +ioport seems to be involved. The ioport decoding circuitry must be pretty +simple, as individual ioport bits are directly matched to specific functions +(or blocks) of the radio card. This way, many functions can be changed in +parallel with one write to the ioport. The only feedback available through +the ioports appears to be the "Stereo Detect" bit. + +The bits of the ioport are arranged as follows: + +.. code-block:: none + + MSb LSb + +------+------+------+--------+--------+-------+---------+--------+ + | VolA | VolB | ???? | Stereo | Radio | TuneA | TuneB | Tune | + | (+) | (-) | | Detect | Audio | (bit) | (latch) | Update | + | | | | Enable | Enable | | | Enable | + +------+------+------+--------+--------+-------+---------+--------+ + + +==== ==== ================================= +VolA VolB Description +==== ==== ================================= +0 0 audio mute +0 1 volume + (some delay required) +1 0 volume - (some delay required) +1 1 stay at present volume +==== ==== ================================= + +==================== =========== +Stereo Detect Enable Description +==================== =========== +0 No Detect +1 Detect +==================== =========== + +Results available by reading ioport >60 msec after last port write. + + 0xff ==> no stereo detected, 0xfd ==> stereo detected. + +============================= ============================= +Radio to Audio (path) Enable Description +============================= ============================= +0 Disable path (silence) +1 Enable path (audio produced) +============================= ============================= + +===== ===== ================== +TuneA TuneB Description +===== ===== ================== +0 0 "zero" bit phase 1 +0 1 "zero" bit phase 2 +1 0 "one" bit phase 1 +1 1 "one" bit phase 2 +===== ===== ================== + + +24-bit code, where bits = (freq*40) + 10486188. +The Most Significant 11 bits must be 1010 xxxx 0x0 to be valid. +The bits are shifted in LSb first. + +================== =========================== +Tune Update Enable Description +================== =========================== +0 Tuner held constant +1 Tuner updating in progress +================== =========================== + + +PROGRAMMING EXAMPLES +-------------------- + +.. code-block:: none + + Default: BASE <-- 0xc8 (current volume, no stereo detect, + radio enable, tuner adjust disable) + + Card Off: BASE <-- 0x00 (audio mute, no stereo detect, + radio disable, tuner adjust disable) + + Card On: BASE <-- 0x00 (see "Card Off", clears any unfinished business) + BASE <-- 0xc8 (see "Default") + + Volume Down: BASE <-- 0x48 (volume down, no stereo detect, + radio enable, tuner adjust disable) + wait 10 msec + BASE <-- 0xc8 (see "Default") + + Volume Up: BASE <-- 0x88 (volume up, no stereo detect, + radio enable, tuner adjust disable) + wait 10 msec + BASE <-- 0xc8 (see "Default") + + Check Stereo: BASE <-- 0xd8 (current volume, stereo detect, + radio enable, tuner adjust disable) + wait 100 msec + x <-- BASE (read ioport) + BASE <-- 0xc8 (see "Default") + + x=0xff ==> "not stereo", x=0xfd ==> "stereo detected" + + Set Frequency: code = (freq*40) + 10486188 + foreach of the 24 bits in code, + (from Least to Most Significant): + to write a "zero" bit, + BASE <-- 0x01 (audio mute, no stereo detect, radio + disable, "zero" bit phase 1, tuner adjust) + BASE <-- 0x03 (audio mute, no stereo detect, radio + disable, "zero" bit phase 2, tuner adjust) + to write a "one" bit, + BASE <-- 0x05 (audio mute, no stereo detect, radio + disable, "one" bit phase 1, tuner adjust) + BASE <-- 0x07 (audio mute, no stereo detect, radio + disable, "one" bit phase 2, tuner adjust) diff --git a/Documentation/media/v4l-drivers/rcar-fdp1.rst b/Documentation/media/v4l-drivers/rcar-fdp1.rst new file mode 100644 index 000000000..a59b1e8e3 --- /dev/null +++ b/Documentation/media/v4l-drivers/rcar-fdp1.rst @@ -0,0 +1,37 @@ +Renesas R-Car Fine Display Processor (FDP1) Driver +================================================== + +The R-Car FDP1 driver implements driver-specific controls as follows. + +``V4L2_CID_DEINTERLACING_MODE (menu)`` + The video deinterlacing mode (such as Bob, Weave, ...). The R-Car FDP1 + driver implements the following modes. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 4 + + * - ``"Progressive" (0)`` + - The input image video stream is progressive (not interlaced). No + deinterlacing is performed. Apart from (optional) format and encoding + conversion output frames are identical to the input frames. + * - ``"Adaptive 2D/3D" (1)`` + - Motion adaptive version of 2D and 3D deinterlacing. Use 3D deinterlacing + in the presence of fast motion and 2D deinterlacing with diagonal + interpolation otherwise. + * - ``"Fixed 2D" (2)`` + - The current field is scaled vertically by averaging adjacent lines to + recover missing lines. This method is also known as blending or Line + Averaging (LAV). + * - ``"Fixed 3D" (3)`` + - The previous and next fields are averaged to recover lines missing from + the current field. This method is also known as Field Averaging (FAV). + * - ``"Previous field" (4)`` + - The current field is weaved with the previous field, i.e. the previous + field is used to fill missing lines from the current field. This method + is also known as weave deinterlacing. + * - ``"Next field" (5)`` + - The current field is weaved with the next field, i.e. the next field is + used to fill missing lines from the current field. This method is also + known as weave deinterlacing. diff --git a/Documentation/media/v4l-drivers/saa7134-cardlist.rst b/Documentation/media/v4l-drivers/saa7134-cardlist.rst new file mode 100644 index 000000000..6e4c35cba --- /dev/null +++ b/Documentation/media/v4l-drivers/saa7134-cardlist.rst @@ -0,0 +1,801 @@ +SAA7134 cards list +================== + +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - PCI IDs + + * - 0 + - UNKNOWN/GENERIC + - + + * - 1 + - Proteus Pro [philips reference design] + - 1131:2001, 1131:2001 + + * - 2 + - LifeView FlyVIDEO3000 + - 5168:0138, 4e42:0138 + + * - 3 + - LifeView/Typhoon FlyVIDEO2000 + - 5168:0138, 4e42:0138 + + * - 4 + - EMPRESS + - 1131:6752 + + * - 5 + - SKNet Monster TV + - 1131:4e85 + + * - 6 + - Tevion MD 9717 + - + + * - 7 + - KNC One TV-Station RDS / Typhoon TV Tuner RDS + - 1131:fe01, 1894:fe01 + + * - 8 + - Terratec Cinergy 400 TV + - 153b:1142 + + * - 9 + - Medion 5044 + - + + * - 10 + - Kworld/KuroutoShikou SAA7130-TVPCI + - + + * - 11 + - Terratec Cinergy 600 TV + - 153b:1143 + + * - 12 + - Medion 7134 + - 16be:0003, 16be:5000 + + * - 13 + - Typhoon TV+Radio 90031 + - + + * - 14 + - ELSA EX-VISION 300TV + - 1048:226b + + * - 15 + - ELSA EX-VISION 500TV + - 1048:226a + + * - 16 + - ASUS TV-FM 7134 + - 1043:4842, 1043:4830, 1043:4840 + + * - 17 + - AOPEN VA1000 POWER + - 1131:7133 + + * - 18 + - BMK MPEX No Tuner + - + + * - 19 + - Compro VideoMate TV + - 185b:c100 + + * - 20 + - Matrox CronosPlus + - 102B:48d0 + + * - 21 + - 10MOONS PCI TV CAPTURE CARD + - 1131:2001 + + * - 22 + - AverMedia M156 / Medion 2819 + - 1461:a70b + + * - 23 + - BMK MPEX Tuner + - + + * - 24 + - KNC One TV-Station DVR + - 1894:a006 + + * - 25 + - ASUS TV-FM 7133 + - 1043:4843 + + * - 26 + - Pinnacle PCTV Stereo (saa7134) + - 11bd:002b + + * - 27 + - Manli MuchTV M-TV002 + - + + * - 28 + - Manli MuchTV M-TV001 + - + + * - 29 + - Nagase Sangyo TransGear 3000TV + - 1461:050c + + * - 30 + - Elitegroup ECS TVP3XP FM1216 Tuner Card(PAL-BG,FM) + - 1019:4cb4 + + * - 31 + - Elitegroup ECS TVP3XP FM1236 Tuner Card (NTSC,FM) + - 1019:4cb5 + + * - 32 + - AVACS SmartTV + - + + * - 33 + - AVerMedia DVD EZMaker + - 1461:10ff + + * - 34 + - Noval Prime TV 7133 + - + + * - 35 + - AverMedia AverTV Studio 305 + - 1461:2115 + + * - 36 + - UPMOST PURPLE TV + - 12ab:0800 + + * - 37 + - Items MuchTV Plus / IT-005 + - + + * - 38 + - Terratec Cinergy 200 TV + - 153b:1152 + + * - 39 + - LifeView FlyTV Platinum Mini + - 5168:0212, 4e42:0212, 5169:1502 + + * - 40 + - Compro VideoMate TV PVR/FM + - 185b:c100 + + * - 41 + - Compro VideoMate TV Gold+ + - 185b:c100 + + * - 42 + - Sabrent SBT-TVFM (saa7130) + - + + * - 43 + - :Zolid Xpert TV7134 + - + + * - 44 + - Empire PCI TV-Radio LE + - + + * - 45 + - Avermedia AVerTV Studio 307 + - 1461:9715 + + * - 46 + - AVerMedia Cardbus TV/Radio (E500) + - 1461:d6ee + + * - 47 + - Terratec Cinergy 400 mobile + - 153b:1162 + + * - 48 + - Terratec Cinergy 600 TV MK3 + - 153b:1158 + + * - 49 + - Compro VideoMate Gold+ Pal + - 185b:c200 + + * - 50 + - Pinnacle PCTV 300i DVB-T + PAL + - 11bd:002d + + * - 51 + - ProVideo PV952 + - 1540:9524 + + * - 52 + - AverMedia AverTV/305 + - 1461:2108 + + * - 53 + - ASUS TV-FM 7135 + - 1043:4845 + + * - 54 + - LifeView FlyTV Platinum FM / Gold + - 5168:0214, 5168:5214, 1489:0214, 5168:0304 + + * - 55 + - LifeView FlyDVB-T DUO / MSI TV@nywhere Duo + - 5168:0306, 4E42:0306 + + * - 56 + - Avermedia AVerTV 307 + - 1461:a70a + + * - 57 + - Avermedia AVerTV GO 007 FM + - 1461:f31f + + * - 58 + - ADS Tech Instant TV (saa7135) + - 1421:0350, 1421:0351, 1421:0370, 1421:1370 + + * - 59 + - Kworld/Tevion V-Stream Xpert TV PVR7134 + - + + * - 60 + - LifeView/Typhoon/Genius FlyDVB-T Duo Cardbus + - 5168:0502, 4e42:0502, 1489:0502 + + * - 61 + - Philips TOUGH DVB-T reference design + - 1131:2004 + + * - 62 + - Compro VideoMate TV Gold+II + - + + * - 63 + - Kworld Xpert TV PVR7134 + - + + * - 64 + - FlyTV mini Asus Digimatrix + - 1043:0210 + + * - 65 + - V-Stream Studio TV Terminator + - + + * - 66 + - Yuan TUN-900 (saa7135) + - + + * - 67 + - Beholder BeholdTV 409 FM + - 0000:4091 + + * - 68 + - GoTView 7135 PCI + - 5456:7135 + + * - 69 + - Philips EUROPA V3 reference design + - 1131:2004 + + * - 70 + - Compro Videomate DVB-T300 + - 185b:c900 + + * - 71 + - Compro Videomate DVB-T200 + - 185b:c901 + + * - 72 + - RTD Embedded Technologies VFG7350 + - 1435:7350 + + * - 73 + - RTD Embedded Technologies VFG7330 + - 1435:7330 + + * - 74 + - LifeView FlyTV Platinum Mini2 + - 14c0:1212 + + * - 75 + - AVerMedia AVerTVHD MCE A180 + - 1461:1044 + + * - 76 + - SKNet MonsterTV Mobile + - 1131:4ee9 + + * - 77 + - Pinnacle PCTV 40i/50i/110i (saa7133) + - 11bd:002e + + * - 78 + - ASUSTeK P7131 Dual + - 1043:4862 + + * - 79 + - Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B) + - + + * - 80 + - ASUS Digimatrix TV + - 1043:0210 + + * - 81 + - Philips Tiger reference design + - 1131:2018 + + * - 82 + - MSI TV@Anywhere plus + - 1462:6231, 1462:8624 + + * - 83 + - Terratec Cinergy 250 PCI TV + - 153b:1160 + + * - 84 + - LifeView FlyDVB Trio + - 5168:0319 + + * - 85 + - AverTV DVB-T 777 + - 1461:2c05, 1461:2c05 + + * - 86 + - LifeView FlyDVB-T / Genius VideoWonder DVB-T + - 5168:0301, 1489:0301 + + * - 87 + - ADS Instant TV Duo Cardbus PTV331 + - 0331:1421 + + * - 88 + - Tevion/KWorld DVB-T 220RF + - 17de:7201 + + * - 89 + - ELSA EX-VISION 700TV + - 1048:226c + + * - 90 + - Kworld ATSC110/115 + - 17de:7350, 17de:7352 + + * - 91 + - AVerMedia A169 B + - 1461:7360 + + * - 92 + - AVerMedia A169 B1 + - 1461:6360 + + * - 93 + - Medion 7134 Bridge #2 + - 16be:0005 + + * - 94 + - LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB + - 5168:3306, 5168:3502, 5168:3307, 4e42:3502 + + * - 95 + - LifeView FlyVIDEO3000 (NTSC) + - 5169:0138 + + * - 96 + - Medion Md8800 Quadro + - 16be:0007, 16be:0008, 16be:000d + + * - 97 + - LifeView FlyDVB-S /Acorp TV134DS + - 5168:0300, 4e42:0300 + + * - 98 + - Proteus Pro 2309 + - 0919:2003 + + * - 99 + - AVerMedia TV Hybrid A16AR + - 1461:2c00 + + * - 100 + - Asus Europa2 OEM + - 1043:4860 + + * - 101 + - Pinnacle PCTV 310i + - 11bd:002f + + * - 102 + - Avermedia AVerTV Studio 507 + - 1461:9715 + + * - 103 + - Compro Videomate DVB-T200A + - + + * - 104 + - Hauppauge WinTV-HVR1110 DVB-T/Hybrid + - 0070:6700, 0070:6701, 0070:6702, 0070:6703, 0070:6704, 0070:6705 + + * - 105 + - Terratec Cinergy HT PCMCIA + - 153b:1172 + + * - 106 + - Encore ENLTV + - 1131:2342, 1131:2341, 3016:2344 + + * - 107 + - Encore ENLTV-FM + - 1131:230f + + * - 108 + - Terratec Cinergy HT PCI + - 153b:1175 + + * - 109 + - Philips Tiger - S Reference design + - + + * - 110 + - Avermedia M102 + - 1461:f31e + + * - 111 + - ASUS P7131 4871 + - 1043:4871 + + * - 112 + - ASUSTeK P7131 Hybrid + - 1043:4876 + + * - 113 + - Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM) + - 1019:4cb6 + + * - 114 + - KWorld DVB-T 210 + - 17de:7250 + + * - 115 + - Sabrent PCMCIA TV-PCB05 + - 0919:2003 + + * - 116 + - 10MOONS TM300 TV Card + - 1131:2304 + + * - 117 + - Avermedia Super 007 + - 1461:f01d + + * - 118 + - Beholder BeholdTV 401 + - 0000:4016 + + * - 119 + - Beholder BeholdTV 403 + - 0000:4036 + + * - 120 + - Beholder BeholdTV 403 FM + - 0000:4037 + + * - 121 + - Beholder BeholdTV 405 + - 0000:4050 + + * - 122 + - Beholder BeholdTV 405 FM + - 0000:4051 + + * - 123 + - Beholder BeholdTV 407 + - 0000:4070 + + * - 124 + - Beholder BeholdTV 407 FM + - 0000:4071 + + * - 125 + - Beholder BeholdTV 409 + - 0000:4090 + + * - 126 + - Beholder BeholdTV 505 FM + - 5ace:5050 + + * - 127 + - Beholder BeholdTV 507 FM / BeholdTV 509 FM + - 5ace:5070, 5ace:5090 + + * - 128 + - Beholder BeholdTV Columbus TV/FM + - 0000:5201 + + * - 129 + - Beholder BeholdTV 607 FM + - 5ace:6070 + + * - 130 + - Beholder BeholdTV M6 + - 5ace:6190 + + * - 131 + - Twinhan Hybrid DTV-DVB 3056 PCI + - 1822:0022 + + * - 132 + - Genius TVGO AM11MCE + - + + * - 133 + - NXP Snake DVB-S reference design + - + + * - 134 + - Medion/Creatix CTX953 Hybrid + - 16be:0010 + + * - 135 + - MSI TV@nywhere A/D v1.1 + - 1462:8625 + + * - 136 + - AVerMedia Cardbus TV/Radio (E506R) + - 1461:f436 + + * - 137 + - AVerMedia Hybrid TV/Radio (A16D) + - 1461:f936 + + * - 138 + - Avermedia M115 + - 1461:a836 + + * - 139 + - Compro VideoMate T750 + - 185b:c900 + + * - 140 + - Avermedia DVB-S Pro A700 + - 1461:a7a1 + + * - 141 + - Avermedia DVB-S Hybrid+FM A700 + - 1461:a7a2 + + * - 142 + - Beholder BeholdTV H6 + - 5ace:6290 + + * - 143 + - Beholder BeholdTV M63 + - 5ace:6191 + + * - 144 + - Beholder BeholdTV M6 Extra + - 5ace:6193 + + * - 145 + - AVerMedia MiniPCI DVB-T Hybrid M103 + - 1461:f636, 1461:f736 + + * - 146 + - ASUSTeK P7131 Analog + - + + * - 147 + - Asus Tiger 3in1 + - 1043:4878 + + * - 148 + - Encore ENLTV-FM v5.3 + - 1a7f:2008 + + * - 149 + - Avermedia PCI pure analog (M135A) + - 1461:f11d + + * - 150 + - Zogis Real Angel 220 + - + + * - 151 + - ADS Tech Instant HDTV + - 1421:0380 + + * - 152 + - Asus Tiger Rev:1.00 + - 1043:4857 + + * - 153 + - Kworld Plus TV Analog Lite PCI + - 17de:7128 + + * - 154 + - Avermedia AVerTV GO 007 FM Plus + - 1461:f31d + + * - 155 + - Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid + - 0070:6706, 0070:6708 + + * - 156 + - Hauppauge WinTV-HVR1120 DVB-T/Hybrid + - 0070:6707, 0070:6709, 0070:670a + + * - 157 + - Avermedia AVerTV Studio 507UA + - 1461:a11b + + * - 158 + - AVerMedia Cardbus TV/Radio (E501R) + - 1461:b7e9 + + * - 159 + - Beholder BeholdTV 505 RDS + - 0000:505B + + * - 160 + - Beholder BeholdTV 507 RDS + - 0000:5071 + + * - 161 + - Beholder BeholdTV 507 RDS + - 0000:507B + + * - 162 + - Beholder BeholdTV 607 FM + - 5ace:6071 + + * - 163 + - Beholder BeholdTV 609 FM + - 5ace:6090 + + * - 164 + - Beholder BeholdTV 609 FM + - 5ace:6091 + + * - 165 + - Beholder BeholdTV 607 RDS + - 5ace:6072 + + * - 166 + - Beholder BeholdTV 607 RDS + - 5ace:6073 + + * - 167 + - Beholder BeholdTV 609 RDS + - 5ace:6092 + + * - 168 + - Beholder BeholdTV 609 RDS + - 5ace:6093 + + * - 169 + - Compro VideoMate S350/S300 + - 185b:c900 + + * - 170 + - AverMedia AverTV Studio 505 + - 1461:a115 + + * - 171 + - Beholder BeholdTV X7 + - 5ace:7595 + + * - 172 + - RoverMedia TV Link Pro FM + - 19d1:0138 + + * - 173 + - Zolid Hybrid TV Tuner PCI + - 1131:2004 + + * - 174 + - Asus Europa Hybrid OEM + - 1043:4847 + + * - 175 + - Leadtek Winfast DTV1000S + - 107d:6655 + + * - 176 + - Beholder BeholdTV 505 RDS + - 0000:5051 + + * - 177 + - Hawell HW-404M7 + - + + * - 178 + - Beholder BeholdTV H7 + - 5ace:7190 + + * - 179 + - Beholder BeholdTV A7 + - 5ace:7090 + + * - 180 + - Avermedia PCI M733A + - 1461:4155, 1461:4255 + + * - 181 + - TechoTrend TT-budget T-3000 + - 13c2:2804 + + * - 182 + - Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid + - 17de:b136 + + * - 183 + - Compro VideoMate Vista M1F + - 185b:c900 + + * - 184 + - Encore ENLTV-FM 3 + - 1a7f:2108 + + * - 185 + - MagicPro ProHDTV Pro2 DMB-TH/Hybrid + - 17de:d136 + + * - 186 + - Beholder BeholdTV 501 + - 5ace:5010 + + * - 187 + - Beholder BeholdTV 503 FM + - 5ace:5030 + + * - 188 + - Sensoray 811/911 + - 6000:0811, 6000:0911 + + * - 189 + - Kworld PC150-U + - 17de:a134 + + * - 190 + - Asus My Cinema PS3-100 + - 1043:48cd + + * - 191 + - Hawell HW-9004V1 + - + + * - 192 + - AverMedia AverTV Satellite Hybrid+FM A706 + - 1461:2055 + + * - 193 + - WIS Voyager or compatible + - 1905:7007 + + * - 194 + - AverMedia AverTV/505 + - 1461:a10a + + * - 195 + - Leadtek Winfast TV2100 FM + - 107d:6f3a + + * - 196 + - SnaZio* TVPVR PRO + - 1779:13cf diff --git a/Documentation/media/v4l-drivers/saa7134.rst b/Documentation/media/v4l-drivers/saa7134.rst new file mode 100644 index 000000000..36b2ee9e0 --- /dev/null +++ b/Documentation/media/v4l-drivers/saa7134.rst @@ -0,0 +1,113 @@ +The saa7134 driver +================== + +Author Gerd Hoffmann + + +This is a v4l2/oss device driver for saa7130/33/34/35 based capture / TV +boards. See http://www.semiconductors.philips.com/pip/saa7134hl for a +description. + + +Status +------ + +Almost everything is working. video, sound, tuner, radio, mpeg ts, ... + +As with bttv, card-specific tweaks are needed. Check CARDLIST for a +list of known TV cards and saa7134-cards.c for the drivers card +configuration info. + + +Build +----- + +Pick up videodev + v4l2 patches from http://bytesex.org/patches/. +Configure, build, install + boot the new kernel. You'll need at least +these config options: + +.. code-block:: none + + CONFIG_I2C=m + CONFIG_VIDEO_DEV=m + +Type "make" to build the driver now. "make install" installs the +driver. "modprobe saa7134" should load it. Depending on the card you +might have to pass card=<nr> as insmod option, check CARDLIST for +valid choices. + + +Changes / Fixes +--------------- + +Please mail me unified diffs ("diff -u") with your changes, and don't +forget to tell me what it changes / which problem it fixes / whatever +it is good for ... + + +Known Problems +-------------- + +* The tuner for the flyvideos isn't detected automatically and the + default might not work for you depending on which version you have. + There is a tuner= insmod option to override the driver's default. + +Card Variations: +---------------- + +Cards can use either of these two crystals (xtal): + +- 32.11 MHz -> .audio_clock=0x187de7 +- 24.576MHz -> .audio_clock=0x200000 (xtal * .audio_clock = 51539600) + +Some details about 30/34/35: + +- saa7130 - low-price chip, doesn't have mute, that is why all those + cards should have .mute field defined in their tuner structure. + +- saa7134 - usual chip + +- saa7133/35 - saa7135 is probably a marketing decision, since all those + chips identifies itself as 33 on pci. + +LifeView GPIOs +-------------- + +This section was authored by: Peter Missel <peter.missel@onlinehome.de> + +- LifeView FlyTV Platinum FM (LR214WF) + + - GP27 MDT2005 PB4 pin 10 + - GP26 MDT2005 PB3 pin 9 + - GP25 MDT2005 PB2 pin 8 + - GP23 MDT2005 PB1 pin 7 + - GP22 MDT2005 PB0 pin 6 + - GP21 MDT2005 PB5 pin 11 + - GP20 MDT2005 PB6 pin 12 + - GP19 MDT2005 PB7 pin 13 + - nc MDT2005 PA3 pin 2 + - Remote MDT2005 PA2 pin 1 + - GP18 MDT2005 PA1 pin 18 + - nc MDT2005 PA0 pin 17 strap low + - GP17 Strap "GP7"=High + - GP16 Strap "GP6"=High + + - 0=Radio 1=TV + - Drives SA630D ENCH1 and HEF4052 A1 pinsto do FM radio through + SIF input + + - GP15 nc + - GP14 nc + - GP13 nc + - GP12 Strap "GP5" = High + - GP11 Strap "GP4" = High + - GP10 Strap "GP3" = High + - GP09 Strap "GP2" = Low + - GP08 Strap "GP1" = Low + - GP07.00 nc + +Credits +------- + +andrew.stevens@philips.com + werner.leeb@philips.com for providing +saa7134 hardware specs and sample board. diff --git a/Documentation/media/v4l-drivers/saa7164-cardlist.rst b/Documentation/media/v4l-drivers/saa7164-cardlist.rst new file mode 100644 index 000000000..e28382ba8 --- /dev/null +++ b/Documentation/media/v4l-drivers/saa7164-cardlist.rst @@ -0,0 +1,69 @@ +SAA7164 cards list +================== + +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - PCI IDs + + * - 0 + - Unknown + - + + * - 1 + - Generic Rev2 + - + + * - 2 + - Generic Rev3 + - + + * - 3 + - Hauppauge WinTV-HVR2250 + - 0070:8880, 0070:8810 + + * - 4 + - Hauppauge WinTV-HVR2200 + - 0070:8980 + + * - 5 + - Hauppauge WinTV-HVR2200 + - 0070:8900 + + * - 6 + - Hauppauge WinTV-HVR2200 + - 0070:8901 + + * - 7 + - Hauppauge WinTV-HVR2250 + - 0070:8891, 0070:8851 + + * - 8 + - Hauppauge WinTV-HVR2250 + - 0070:88A1 + + * - 9 + - Hauppauge WinTV-HVR2200 + - 0070:8940 + + * - 10 + - Hauppauge WinTV-HVR2200 + - 0070:8953 + + * - 11 + - Hauppauge WinTV-HVR2255(proto) + - 0070:f111 + + * - 12 + - Hauppauge WinTV-HVR2255 + - 0070:f111 + + * - 13 + - Hauppauge WinTV-HVR2205 + - 0070:f123, 0070:f120 diff --git a/Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst b/Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst new file mode 100644 index 000000000..e40ffea77 --- /dev/null +++ b/Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst @@ -0,0 +1,140 @@ +Cropping and Scaling algorithm, used in the sh_mobile_ceu_camera driver +======================================================================= + +Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> + +Terminology +----------- + +sensor scales: horizontal and vertical scales, configured by the sensor driver +host scales: -"- host driver +combined scales: sensor_scale * host_scale + + +Generic scaling / cropping scheme +--------------------------------- + +.. code-block:: none + + -1-- + | + -2-- -\ + | --\ + | --\ + +-5-- . -- -3-- -\ + | `... -\ + | `... -4-- . - -7.. + | `. + | `. .6-- + | + | . .6'- + | .´ + | ... -4'- .´ + | ...´ - -7'. + +-5'- .´ -/ + | -- -3'- -/ + | --/ + | --/ + -2'- -/ + | + | + -1'- + +In the above chart minuses and slashes represent "real" data amounts, points and +accents represent "useful" data, basically, CEU scaled and cropped output, +mapped back onto the client's source plane. + +Such a configuration can be produced by user requests: + +S_CROP(left / top = (5) - (1), width / height = (5') - (5)) +S_FMT(width / height = (6') - (6)) + +Here: + +(1) to (1') - whole max width or height +(1) to (2) - sensor cropped left or top +(2) to (2') - sensor cropped width or height +(3) to (3') - sensor scale +(3) to (4) - CEU cropped left or top +(4) to (4') - CEU cropped width or height +(5) to (5') - reverse sensor scale applied to CEU cropped width or height +(2) to (5) - reverse sensor scale applied to CEU cropped left or top +(6) to (6') - CEU scale - user window + + +S_FMT +----- + +Do not touch input rectangle - it is already optimal. + +1. Calculate current sensor scales: + + scale_s = ((2') - (2)) / ((3') - (3)) + +2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at +current sensor scales onto input window - this is user S_CROP: + + width_u = (5') - (5) = ((4') - (4)) * scale_s + +3. Calculate new combined scales from "effective" input window to requested user +window: + + scale_comb = width_u / ((6') - (6)) + +4. Calculate sensor output window by applying combined scales to real input +window: + + width_s_out = ((7') - (7)) = ((2') - (2)) / scale_comb + +5. Apply iterative sensor S_FMT for sensor output window. + + subdev->video_ops->s_fmt(.width = width_s_out) + +6. Retrieve sensor output window (g_fmt) + +7. Calculate new sensor scales: + + scale_s_new = ((3')_new - (3)_new) / ((2') - (2)) + +8. Calculate new CEU crop - apply sensor scales to previously calculated +"effective" crop: + + width_ceu = (4')_new - (4)_new = width_u / scale_s_new + left_ceu = (4)_new - (3)_new = ((5) - (2)) / scale_s_new + +9. Use CEU cropping to crop to the new window: + + ceu_crop(.width = width_ceu, .left = left_ceu) + +10. Use CEU scaling to scale to the requested user window: + + scale_ceu = width_ceu / width + + +S_CROP +------ + +The API at http://v4l2spec.bytesex.org/spec/x1904.htm says: + +"...specification does not define an origin or units. However by convention +drivers should horizontally count unscaled samples relative to 0H." + +We choose to follow the advise and interpret cropping units as client input +pixels. + +Cropping is performed in the following 6 steps: + +1. Request exactly user rectangle from the sensor. + +2. If smaller - iterate until a larger one is obtained. Result: sensor cropped + to 2 : 2', target crop 5 : 5', current output format 6' - 6. + +3. In the previous step the sensor has tried to preserve its output frame as + good as possible, but it could have changed. Retrieve it again. + +4. Sensor scaled to 3 : 3'. Sensor's scale is (2' - 2) / (3' - 3). Calculate + intermediate window: 4' - 4 = (5' - 5) * (3' - 3) / (2' - 2) + +5. Calculate and apply host scale = (6' - 6) / (4' - 4) + +6. Calculate and apply host crop: 6 - 7 = (5 - 2) * (6' - 6) / (5' - 5) diff --git a/Documentation/media/v4l-drivers/si470x.rst b/Documentation/media/v4l-drivers/si470x.rst new file mode 100644 index 000000000..955d8ca15 --- /dev/null +++ b/Documentation/media/v4l-drivers/si470x.rst @@ -0,0 +1,165 @@ +.. include:: <isonum.txt> + +The Silicon Labs Si470x FM Radio Receivers driver +================================================= + +Copyright |copy| 2009 Tobias Lorenz <tobias.lorenz@gmx.net> + + +Information from Silicon Labs +----------------------------- + +Silicon Laboratories is the manufacturer of the radio ICs, that nowadays are the +most often used radio receivers in cell phones. Usually they are connected with +I2C. But SiLabs also provides a reference design, which integrates this IC, +together with a small microcontroller C8051F321, to form a USB radio. +Part of this reference design is also a radio application in binary and source +code. The software also contains an automatic firmware upgrade to the most +current version. Information on these can be downloaded here: +http://www.silabs.com/usbradio + + +Supported ICs +------------- + +The following ICs have a very similar register set, so that they are or will be +supported somewhen by the driver: + +- Si4700: FM radio receiver +- Si4701: FM radio receiver, RDS Support +- Si4702: FM radio receiver +- Si4703: FM radio receiver, RDS Support +- Si4704: FM radio receiver, no external antenna required +- Si4705: FM radio receiver, no external antenna required, RDS support, Dig I/O +- Si4706: Enhanced FM RDS/TMC radio receiver, no external antenna required, RDS + Support +- Si4707: Dedicated weather band radio receiver with SAME decoder, RDS Support +- Si4708: Smallest FM receivers +- Si4709: Smallest FM receivers, RDS Support + +More information on these can be downloaded here: +http://www.silabs.com/products/mcu/Pages/USBFMRadioRD.aspx + + +Supported USB devices +--------------------- + +Currently the following USB radios (vendor:product) with the Silicon Labs si470x +chips are known to work: + +- 10c4:818a: Silicon Labs USB FM Radio Reference Design +- 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF) +- 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700) +- 10c5:819a: Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear) + + +Software +-------- + +Testing is usually done with most application under Debian/testing: + +- fmtools - Utility for managing FM tuner cards +- gnomeradio - FM-radio tuner for the GNOME desktop +- gradio - GTK FM radio tuner +- kradio - Comfortable Radio Application for KDE +- radio - ncurses-based radio application +- mplayer - The Ultimate Movie Player For Linux +- v4l2-ctl - Collection of command line video4linux utilities + +For example, you can use: + +.. code-block:: none + + v4l2-ctl -d /dev/radio0 --set-ctrl=volume=10,mute=0 --set-freq=95.21 --all + +There is also a library libv4l, which can be used. It's going to have a function +for frequency seeking, either by using hardware functionality as in radio-si470x +or by implementing a function as we currently have in every of the mentioned +programs. Somewhen the radio programs should make use of libv4l. + +For processing RDS information, there is a project ongoing at: +http://rdsd.berlios.de/ + +There is currently no project for making TMC sentences human readable. + + +Audio Listing +------------- + +USB Audio is provided by the ALSA snd_usb_audio module. It is recommended to +also select SND_USB_AUDIO, as this is required to get sound from the radio. For +listing you have to redirect the sound, for example using one of the following +commands. Please adjust the audio devices to your needs (/dev/dsp* and hw:x,x). + +If you just want to test audio (very poor quality): + +.. code-block:: none + + cat /dev/dsp1 > /dev/dsp + +If you use sox + OSS try: + +.. code-block:: none + + sox -2 --endian little -r 96000 -t oss /dev/dsp1 -t oss /dev/dsp + +or using sox + alsa: + +.. code-block:: none + + sox --endian little -c 2 -S -r 96000 -t alsa hw:1 -t alsa -r 96000 hw:0 + +If you use arts try: + +.. code-block:: none + + arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B - + +If you use mplayer try: + +.. code-block:: none + + mplayer -radio adevice=hw=1.0:arate=96000 \ + -rawaudio rate=96000 \ + radio://<frequency>/capture + +Module Parameters +----------------- + +After loading the module, you still have access to some of them in the sysfs +mount under /sys/module/radio_si470x/parameters. The contents of read-only files +(0444) are not updated, even if space, band and de are changed using private +video controls. The others are runtime changeable. + + +Errors +------ + +Increase tune_timeout, if you often get -EIO errors. + +When timed out or band limit is reached, hw_freq_seek returns -EAGAIN. + +If you get any errors from snd_usb_audio, please report them to the ALSA people. + + +Open Issues +----------- + +V4L minor device allocation and parameter setting is not perfect. A solution is +currently under discussion. + +There is an USB interface for downloading/uploading new firmware images. Support +for it can be implemented using the request_firmware interface. + +There is a RDS interrupt mode. The driver is already using the same interface +for polling RDS information, but is currently not using the interrupt mode. + +There is a LED interface, which can be used to override the LED control +programmed in the firmware. This can be made available using the LED support +functions in the kernel. + + +Other useful information and links +---------------------------------- + +http://www.silabs.com/usbradio diff --git a/Documentation/media/v4l-drivers/si4713.rst b/Documentation/media/v4l-drivers/si4713.rst new file mode 100644 index 000000000..3022e7cfe --- /dev/null +++ b/Documentation/media/v4l-drivers/si4713.rst @@ -0,0 +1,190 @@ +.. include:: <isonum.txt> + +The Silicon Labs Si4713 FM Radio Transmitter Driver +=================================================== + +Copyright |copy| 2009 Nokia Corporation + +Contact: Eduardo Valentin <eduardo.valentin@nokia.com> + + +Information about the Device +---------------------------- + +This chip is a Silicon Labs product. It is a I2C device, currently on 0x63 address. +Basically, it has transmission and signal noise level measurement features. + +The Si4713 integrates transmit functions for FM broadcast stereo transmission. +The chip also allows integrated receive power scanning to identify low signal +power FM channels. + +The chip is programmed using commands and responses. There are also several +properties which can change the behavior of this chip. + +Users must comply with local regulations on radio frequency (RF) transmission. + +Device driver description +------------------------- + +There are two modules to handle this device. One is a I2C device driver +and the other is a platform driver. + +The I2C device driver exports a v4l2-subdev interface to the kernel. +All properties can also be accessed by v4l2 extended controls interface, by +using the v4l2-subdev calls (g_ext_ctrls, s_ext_ctrls). + +The platform device driver exports a v4l2 radio device interface to user land. +So, it uses the I2C device driver as a sub device in order to send the user +commands to the actual device. Basically it is a wrapper to the I2C device driver. + +Applications can use v4l2 radio API to specify frequency of operation, mute state, +etc. But mostly of its properties will be present in the extended controls. + +When the v4l2 mute property is set to 1 (true), the driver will turn the chip off. + +Properties description +---------------------- + +The properties can be accessed using v4l2 extended controls. +Here is an output from v4l2-ctl util: + +.. code-block:: none + + / # v4l2-ctl -d /dev/radio0 --all -L + Driver Info: + Driver name : radio-si4713 + Card type : Silicon Labs Si4713 Modulator + Bus info : + Driver version: 0 + Capabilities : 0x00080800 + RDS Output + Modulator + Audio output: 0 (FM Modulator Audio Out) + Frequency: 1408000 (88.000000 MHz) + Video Standard = 0x00000000 + Modulator: + Name : FM Modulator + Capabilities : 62.5 Hz stereo rds + Frequency range : 76.0 MHz - 108.0 MHz + Subchannel modulation: stereo+rds + + User Controls + + mute (bool) : default=1 value=0 + + FM Radio Modulator Controls + + rds_signal_deviation (int) : min=0 max=90000 step=10 default=200 value=200 flags=slider + rds_program_id (int) : min=0 max=65535 step=1 default=0 value=0 + rds_program_type (int) : min=0 max=31 step=1 default=0 value=0 + rds_ps_name (str) : min=0 max=96 step=8 value='si4713 ' + rds_radio_text (str) : min=0 max=384 step=32 value='' + audio_limiter_feature_enabled (bool) : default=1 value=1 + audio_limiter_release_time (int) : min=250 max=102390 step=50 default=5010 value=5010 flags=slider + audio_limiter_deviation (int) : min=0 max=90000 step=10 default=66250 value=66250 flags=slider + audio_compression_feature_enabl (bool) : default=1 value=1 + audio_compression_gain (int) : min=0 max=20 step=1 default=15 value=15 flags=slider + audio_compression_threshold (int) : min=-40 max=0 step=1 default=-40 value=-40 flags=slider + audio_compression_attack_time (int) : min=0 max=5000 step=500 default=0 value=0 flags=slider + audio_compression_release_time (int) : min=100000 max=1000000 step=100000 default=1000000 value=1000000 flags=slider + pilot_tone_feature_enabled (bool) : default=1 value=1 + pilot_tone_deviation (int) : min=0 max=90000 step=10 default=6750 value=6750 flags=slider + pilot_tone_frequency (int) : min=0 max=19000 step=1 default=19000 value=19000 flags=slider + pre_emphasis_settings (menu) : min=0 max=2 default=1 value=1 + tune_power_level (int) : min=0 max=120 step=1 default=88 value=88 flags=slider + tune_antenna_capacitor (int) : min=0 max=191 step=1 default=0 value=110 flags=slider + +Here is a summary of them: + +* Pilot is an audible tone sent by the device. + +- pilot_frequency - Configures the frequency of the stereo pilot tone. +- pilot_deviation - Configures pilot tone frequency deviation level. +- pilot_enabled - Enables or disables the pilot tone feature. + +* The si4713 device is capable of applying audio compression to the + transmitted signal. + +- acomp_enabled - Enables or disables the audio dynamic range control feature. +- acomp_gain - Sets the gain for audio dynamic range control. +- acomp_threshold - Sets the threshold level for audio dynamic range control. +- acomp_attack_time - Sets the attack time for audio dynamic range control. +- acomp_release_time - Sets the release time for audio dynamic range control. + +* Limiter setups audio deviation limiter feature. Once a over deviation occurs, + it is possible to adjust the front-end gain of the audio input and always + prevent over deviation. + +- limiter_enabled - Enables or disables the limiter feature. +- limiter_deviation - Configures audio frequency deviation level. +- limiter_release_time - Sets the limiter release time. + +* Tuning power + +- power_level - Sets the output power level for signal transmission. + antenna_capacitor - This selects the value of antenna tuning capacitor + manually or automatically if set to zero. + +* RDS related + +- rds_ps_name - Sets the RDS ps name field for transmission. +- rds_radio_text - Sets the RDS radio text for transmission. +- rds_pi - Sets the RDS PI field for transmission. +- rds_pty - Sets the RDS PTY field for transmission. + +* Region related + +- preemphasis - sets the preemphasis to be applied for transmission. + +RNL +--- + +This device also has an interface to measure received noise level. To do that, you should +ioctl the device node. Here is an code of example: + +.. code-block:: none + + int main (int argc, char *argv[]) + { + struct si4713_rnl rnl; + int fd = open("/dev/radio0", O_RDWR); + int rval; + + if (argc < 2) + return -EINVAL; + + if (fd < 0) + return fd; + + sscanf(argv[1], "%d", &rnl.frequency); + + rval = ioctl(fd, SI4713_IOC_MEASURE_RNL, &rnl); + if (rval < 0) + return rval; + + printf("received noise level: %d\n", rnl.rnl); + + close(fd); + } + +The struct si4713_rnl and SI4713_IOC_MEASURE_RNL are defined under +include/linux/platform_data/media/si4713.h. + +Stereo/Mono and RDS subchannels +------------------------------- + +The device can also be configured using the available sub channels for +transmission. To do that use S/G_MODULATOR ioctl and configure txsubchans properly. +Refer to the V4L2 API specification for proper use of this ioctl. + +Testing +------- +Testing is usually done with v4l2-ctl utility for managing FM tuner cards. +The tool can be found in v4l-dvb repository under v4l2-apps/util directory. + +Example for setting rds ps name: + +.. code-block:: none + + # v4l2-ctl -d /dev/radio0 --set-ctrl=rds_ps_name="Dummy" + diff --git a/Documentation/media/v4l-drivers/si476x.rst b/Documentation/media/v4l-drivers/si476x.rst new file mode 100644 index 000000000..677512566 --- /dev/null +++ b/Documentation/media/v4l-drivers/si476x.rst @@ -0,0 +1,158 @@ +.. include:: <isonum.txt> + + +The SI476x Driver +================= + +Copyright |copy| 2013 Andrey Smirnov <andrew.smirnov@gmail.com> + +TODO for the driver +------------------- + +- According to the SiLabs' datasheet it is possible to update the + firmware of the radio chip in the run-time, thus bringing it to the + most recent version. Unfortunately I couldn't find any mentioning of + the said firmware update for the old chips that I tested the driver + against, so for chips like that the driver only exposes the old + functionality. + + +Parameters exposed over debugfs +------------------------------- +SI476x allow user to get multiple characteristics that can be very +useful for EoL testing/RF performance estimation, parameters that have +very little to do with V4L2 subsystem. Such parameters are exposed via +debugfs and can be accessed via regular file I/O operations. + +The drivers exposes following files: + +* /sys/kernel/debug/<device-name>/acf + This file contains ACF(Automatically Controlled Features) status + information. The contents of the file is binary data of the + following layout: + + .. tabularcolumns:: |p{7ex}|p{12ex}|L| + + ============= ============== ==================================== + Offset Name Description + ============= ============== ==================================== + 0x00 blend_int Flag, set when stereo separation has + crossed below the blend threshold + 0x01 hblend_int Flag, set when HiBlend cutoff + frequency is lower than threshold + 0x02 hicut_int Flag, set when HiCut cutoff + frequency is lower than threshold + 0x03 chbw_int Flag, set when channel filter + bandwidth is less than threshold + 0x04 softmute_int Flag indicating that softmute + attenuation has increased above + softmute threshold + 0x05 smute 0 - Audio is not soft muted + 1 - Audio is soft muted + 0x06 smattn Soft mute attenuation level in dB + 0x07 chbw Channel filter bandwidth in kHz + 0x08 hicut HiCut cutoff frequency in units of + 100Hz + 0x09 hiblend HiBlend cutoff frequency in units + of 100 Hz + 0x10 pilot 0 - Stereo pilot is not present + 1 - Stereo pilot is present + 0x11 stblend Stereo blend in % + ============= ============== ==================================== + + +* /sys/kernel/debug/<device-name>/rds_blckcnt + This file contains statistics about RDS receptions. It's binary data + has the following layout: + + .. tabularcolumns:: |p{7ex}|p{12ex}|L| + + ============= ============== ==================================== + Offset Name Description + ============= ============== ==================================== + 0x00 expected Number of expected RDS blocks + 0x02 received Number of received RDS blocks + 0x04 uncorrectable Number of uncorrectable RDS blocks + ============= ============== ==================================== + +* /sys/kernel/debug/<device-name>/agc + This file contains information about parameters pertaining to + AGC(Automatic Gain Control) + + The layout is: + + .. tabularcolumns:: |p{7ex}|p{12ex}|L| + + ============= ============== ==================================== + Offset Name Description + ============= ============== ==================================== + 0x00 mxhi 0 - FM Mixer PD high threshold is + not tripped + 1 - FM Mixer PD high threshold is + tripped + 0x01 mxlo ditto for FM Mixer PD low + 0x02 lnahi ditto for FM LNA PD high + 0x03 lnalo ditto for FM LNA PD low + 0x04 fmagc1 FMAGC1 attenuator resistance + (see datasheet for more detail) + 0x05 fmagc2 ditto for FMAGC2 + 0x06 pgagain PGA gain in dB + 0x07 fmwblang FM/WB LNA Gain in dB + ============= ============== ==================================== + +* /sys/kernel/debug/<device-name>/rsq + This file contains information about parameters pertaining to + RSQ(Received Signal Quality) + + The layout is: + + .. tabularcolumns:: |p{7ex}|p{12ex}|p{60ex}| + + ============= ============== ==================================== + Offset Name Description + ============= ============== ==================================== + 0x00 multhint 0 - multipath value has not crossed + the Multipath high threshold + 1 - multipath value has crossed + the Multipath high threshold + 0x01 multlint ditto for Multipath low threshold + 0x02 snrhint 0 - received signal's SNR has not + crossed high threshold + 1 - received signal's SNR has + crossed high threshold + 0x03 snrlint ditto for low threshold + 0x04 rssihint ditto for RSSI high threshold + 0x05 rssilint ditto for RSSI low threshold + 0x06 bltf Flag indicating if seek command + reached/wrapped seek band limit + 0x07 snr_ready Indicates that SNR metrics is ready + 0x08 rssiready ditto for RSSI metrics + 0x09 injside 0 - Low-side injection is being used + 1 - High-side injection is used + 0x10 afcrl Flag indicating if AFC rails + 0x11 valid Flag indicating if channel is valid + 0x12 readfreq Current tuned frequency + 0x14 freqoff Signed frequency offset in units of + 2ppm + 0x15 rssi Signed value of RSSI in dBuV + 0x16 snr Signed RF SNR in dB + 0x17 issi Signed Image Strength Signal + indicator + 0x18 lassi Signed Low side adjacent Channel + Strength indicator + 0x19 hassi ditto fpr High side + 0x20 mult Multipath indicator + 0x21 dev Frequency deviation + 0x24 assi Adjacent channel SSI + 0x25 usn Ultrasonic noise indicator + 0x26 pilotdev Pilot deviation in units of 100 Hz + 0x27 rdsdev ditto for RDS + 0x28 assidev ditto for ASSI + 0x29 strongdev Frequency deviation + 0x30 rdspi RDS PI code + ============= ============== ==================================== + +* /sys/kernel/debug/<device-name>/rsq_primary + This file contains information about parameters pertaining to + RSQ(Received Signal Quality) for primary tuner only. Layout is as + the one above. diff --git a/Documentation/media/v4l-drivers/soc-camera.rst b/Documentation/media/v4l-drivers/soc-camera.rst new file mode 100644 index 000000000..79d09e423 --- /dev/null +++ b/Documentation/media/v4l-drivers/soc-camera.rst @@ -0,0 +1,169 @@ +The Soc-Camera Drivers +====================== + +Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> + +Terminology +----------- + +The following terms are used in this document: + - camera / camera device / camera sensor - a video-camera sensor chip, capable + of connecting to a variety of systems and interfaces, typically uses i2c for + control and configuration, and a parallel or a serial bus for data. + - camera host - an interface, to which a camera is connected. Typically a + specialised interface, present on many SoCs, e.g. PXA27x and PXA3xx, SuperH, + i.MX27, i.MX31. + - camera host bus - a connection between a camera host and a camera. Can be + parallel or serial, consists of data and control lines, e.g. clock, vertical + and horizontal synchronization signals. + +Purpose of the soc-camera subsystem +----------------------------------- + +The soc-camera subsystem initially provided a unified API between camera host +drivers and camera sensor drivers. Later the soc-camera sensor API has been +replaced with the V4L2 standard subdev API. This also made camera driver re-use +with non-soc-camera hosts possible. The camera host API to the soc-camera core +has been preserved. + +Soc-camera implements a V4L2 interface to the user, currently only the "mmap" +method is supported by host drivers. However, the soc-camera core also provides +support for the "read" method. + +The subsystem has been designed to support multiple camera host interfaces and +multiple cameras per interface, although most applications have only one camera +sensor. + +Existing drivers +---------------- + +As of 3.7 there are seven host drivers in the mainline: atmel-isi.c, +mx1_camera.c (broken, scheduled for removal), mx2_camera.c, mx3_camera.c, +omap1_camera.c, pxa_camera.c, sh_mobile_ceu_camera.c, and multiple sensor +drivers under drivers/media/i2c/soc_camera/. + +Camera host API +--------------- + +A host camera driver is registered using the + +.. code-block:: none + + soc_camera_host_register(struct soc_camera_host *); + +function. The host object can be initialized as follows: + +.. code-block:: none + + struct soc_camera_host *ici; + ici->drv_name = DRV_NAME; + ici->ops = &camera_host_ops; + ici->priv = pcdev; + ici->v4l2_dev.dev = &pdev->dev; + ici->nr = pdev->id; + +All camera host methods are passed in a struct soc_camera_host_ops: + +.. code-block:: none + + static struct soc_camera_host_ops camera_host_ops = { + .owner = THIS_MODULE, + .add = camera_add_device, + .remove = camera_remove_device, + .set_fmt = camera_set_fmt_cap, + .try_fmt = camera_try_fmt_cap, + .init_videobuf2 = camera_init_videobuf2, + .poll = camera_poll, + .querycap = camera_querycap, + .set_bus_param = camera_set_bus_param, + /* The rest of host operations are optional */ + }; + +.add and .remove methods are called when a sensor is attached to or detached +from the host. .set_bus_param is used to configure physical connection +parameters between the host and the sensor. .init_videobuf2 is called by +soc-camera core when a video-device is opened, the host driver would typically +call vb2_queue_init() in this method. Further video-buffer management is +implemented completely by the specific camera host driver. If the host driver +supports non-standard pixel format conversion, it should implement a +.get_formats and, possibly, a .put_formats operations. See below for more +details about format conversion. The rest of the methods are called from +respective V4L2 operations. + +Camera API +---------- + +Sensor drivers can use struct soc_camera_link, typically provided by the +platform, and used to specify to which camera host bus the sensor is connected, +and optionally provide platform .power and .reset methods for the camera. This +struct is provided to the camera driver via the I2C client device platform data +and can be obtained, using the soc_camera_i2c_to_link() macro. Care should be +taken, when using soc_camera_vdev_to_subdev() and when accessing struct +soc_camera_device, using v4l2_get_subdev_hostdata(): both only work, when +running on an soc-camera host. The actual camera driver operation is implemented +using the V4L2 subdev API. Additionally soc-camera camera drivers can use +auxiliary soc-camera helper functions like soc_camera_power_on() and +soc_camera_power_off(), which switch regulators, provided by the platform and call +board-specific power switching methods. soc_camera_apply_board_flags() takes +camera bus configuration capability flags and applies any board transformations, +e.g. signal polarity inversion. soc_mbus_get_fmtdesc() can be used to obtain a +pixel format descriptor, corresponding to a certain media-bus pixel format code. +soc_camera_limit_side() can be used to restrict beginning and length of a frame +side, based on camera capabilities. + +VIDIOC_S_CROP and VIDIOC_S_FMT behaviour +---------------------------------------- + +Above user ioctls modify image geometry as follows: + +VIDIOC_S_CROP: sets location and sizes of the sensor window. Unit is one sensor +pixel. Changing sensor window sizes preserves any scaling factors, therefore +user window sizes change as well. + +VIDIOC_S_FMT: sets user window. Should preserve previously set sensor window as +much as possible by modifying scaling factors. If the sensor window cannot be +preserved precisely, it may be changed too. + +In soc-camera there are two locations, where scaling and cropping can take +place: in the camera driver and in the host driver. User ioctls are first passed +to the host driver, which then generally passes them down to the camera driver. +It is more efficient to perform scaling and cropping in the camera driver to +save camera bus bandwidth and maximise the framerate. However, if the camera +driver failed to set the required parameters with sufficient precision, the host +driver may decide to also use its own scaling and cropping to fulfill the user's +request. + +Camera drivers are interfaced to the soc-camera core and to host drivers over +the v4l2-subdev API, which is completely functional, it doesn't pass any data. +Therefore all camera drivers shall reply to .g_fmt() requests with their current +output geometry. This is necessary to correctly configure the camera bus. +.s_fmt() and .try_fmt() have to be implemented too. Sensor window and scaling +factors have to be maintained by camera drivers internally. According to the +V4L2 API all capture drivers must support the VIDIOC_CROPCAP ioctl, hence we +rely on camera drivers implementing .cropcap(). If the camera driver does not +support cropping, it may choose to not implement .s_crop(), but to enable +cropping support by the camera host driver at least the .g_crop method must be +implemented. + +User window geometry is kept in .user_width and .user_height fields in struct +soc_camera_device and used by the soc-camera core and host drivers. The core +updates these fields upon successful completion of a .s_fmt() call, but if these +fields change elsewhere, e.g. during .s_crop() processing, the host driver is +responsible for updating them. + +Format conversion +----------------- + +V4L2 distinguishes between pixel formats, as they are stored in memory, and as +they are transferred over a media bus. Soc-camera provides support to +conveniently manage these formats. A table of standard transformations is +maintained by soc-camera core, which describes, what FOURCC pixel format will +be obtained, if a media-bus pixel format is stored in memory according to +certain rules. E.g. if MEDIA_BUS_FMT_YUYV8_2X8 data is sampled with 8 bits per +sample and stored in memory in the little-endian order with no gaps between +bytes, data in memory will represent the V4L2_PIX_FMT_YUYV FOURCC format. These +standard transformations will be used by soc-camera or by camera host drivers to +configure camera drivers to produce the FOURCC format, requested by the user, +using the VIDIOC_S_FMT ioctl(). Apart from those standard format conversions, +host drivers can also provide their own conversion rules by implementing a +.get_formats and, if required, a .put_formats methods. diff --git a/Documentation/media/v4l-drivers/tm6000-cardlist.rst b/Documentation/media/v4l-drivers/tm6000-cardlist.rst new file mode 100644 index 000000000..6bd083544 --- /dev/null +++ b/Documentation/media/v4l-drivers/tm6000-cardlist.rst @@ -0,0 +1,81 @@ +TM6000 cards list +================= + +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - USB IDs + + * - 0 + - Unknown tm6000 video grabber + - + + * - 1 + - Generic tm5600 board + - 6000:0001 + + * - 2 + - Generic tm6000 board + - + + * - 3 + - Generic tm6010 board + - 6000:0002 + + * - 4 + - 10Moons UT 821 + - + + * - 5 + - 10Moons UT 330 + - + + * - 6 + - ADSTECH Dual TV USB + - 06e1:f332 + + * - 7 + - Freecom Hybrid Stick / Moka DVB-T Receiver Dual + - 14aa:0620 + + * - 8 + - ADSTECH Mini Dual TV USB + - 06e1:b339 + + * - 9 + - Hauppauge WinTV HVR-900H / WinTV USB2-Stick + - 2040:6600, 2040:6601, 2040:6610, 2040:6611 + + * - 10 + - Beholder Wander DVB-T/TV/FM USB2.0 + - 6000:dec0 + + * - 11 + - Beholder Voyager TV/FM USB2.0 + - 6000:dec1 + + * - 12 + - Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick + - 0ccd:0086, 0ccd:00A5 + + * - 13 + - Twinhan TU501(704D1) + - 13d3:3240, 13d3:3241, 13d3:3243, 13d3:3264 + + * - 14 + - Beholder Wander Lite DVB-T/TV/FM USB2.0 + - 6000:dec2 + + * - 15 + - Beholder Voyager Lite TV/FM USB2.0 + - 6000:dec3 + + * - 16 + - Terratec Grabster AV 150/250 MX + - 0ccd:0079 diff --git a/Documentation/media/v4l-drivers/tuner-cardlist.rst b/Documentation/media/v4l-drivers/tuner-cardlist.rst new file mode 100644 index 000000000..276dd90e0 --- /dev/null +++ b/Documentation/media/v4l-drivers/tuner-cardlist.rst @@ -0,0 +1,98 @@ +Tuner cards list +================ + +============ ===================================================== +Tuner number Card name +============ ===================================================== +0 Temic PAL (4002 FH5) +1 Philips PAL_I (FI1246 and compatibles) +2 Philips NTSC (FI1236,FM1236 and compatibles) +3 Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF) +4 NoTuner +5 Philips PAL_BG (FI1216 and compatibles) +6 Temic NTSC (4032 FY5) +7 Temic PAL_I (4062 FY5) +8 Temic NTSC (4036 FY5) +9 Alps HSBH1 +10 Alps TSBE1 +11 Alps TSBB5 +12 Alps TSBE5 +13 Alps TSBC5 +14 Temic PAL_BG (4006FH5) +15 Alps TSCH6 +16 Temic PAL_DK (4016 FY5) +17 Philips NTSC_M (MK2) +18 Temic PAL_I (4066 FY5) +19 Temic PAL* auto (4006 FN5) +20 Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5) +21 Temic NTSC (4039 FR5) +22 Temic PAL/SECAM multi (4046 FM5) +23 Philips PAL_DK (FI1256 and compatibles) +24 Philips PAL/SECAM multi (FQ1216ME) +25 LG PAL_I+FM (TAPC-I001D) +26 LG PAL_I (TAPC-I701D) +27 LG NTSC+FM (TPI8NSR01F) +28 LG PAL_BG+FM (TPI8PSB01D) +29 LG PAL_BG (TPI8PSB11D) +30 Temic PAL* auto + FM (4009 FN5) +31 SHARP NTSC_JP (2U5JF5540) +32 Samsung PAL TCPM9091PD27 +33 MT20xx universal +34 Temic PAL_BG (4106 FH5) +35 Temic PAL_DK/SECAM_L (4012 FY5) +36 Temic NTSC (4136 FY5) +37 LG PAL (newer TAPC series) +38 Philips PAL/SECAM multi (FM1216ME MK3) +39 LG NTSC (newer TAPC series) +40 HITACHI V7-J180AT +41 Philips PAL_MK (FI1216 MK) +42 Philips FCV1236D ATSC/NTSC dual in +43 Philips NTSC MK3 (FM1236MK3 or FM1236/F) +44 Philips 4 in 1 (ATI TV Wonder Pro/Conexant) +45 Microtune 4049 FM5 +46 Panasonic VP27s/ENGE4324D +47 LG NTSC (TAPE series) +48 Tenna TNF 8831 BGFF) +49 Microtune 4042 FI5 ATSC/NTSC dual in +50 TCL 2002N +51 Philips PAL/SECAM_D (FM 1256 I-H3) +52 Thomson DTT 7610 (ATSC/NTSC) +53 Philips FQ1286 +54 Philips/NXP TDA 8290/8295 + 8275/8275A/18271 +55 TCL 2002MB +56 Philips PAL/SECAM multi (FQ1216AME MK4) +57 Philips FQ1236A MK4 +58 Ymec TVision TVF-8531MF/8831MF/8731MF +59 Ymec TVision TVF-5533MF +60 Thomson DTT 761X (ATSC/NTSC) +61 Tena TNF9533-D/IF/TNF9533-B/DF +62 Philips TEA5767HN FM Radio +63 Philips FMD1216ME MK3 Hybrid Tuner +64 LG TDVS-H06xF +65 Ymec TVF66T5-B/DFF +66 LG TALN series +67 Philips TD1316 Hybrid Tuner +68 Philips TUV1236D ATSC/NTSC dual in +69 Tena TNF 5335 and similar models +70 Samsung TCPN 2121P30A +71 Xceive xc2028/xc3028 tuner +72 Thomson FE6600 +73 Samsung TCPG 6121P30A +75 Philips TEA5761 FM Radio +76 Xceive 5000 tuner +77 TCL tuner MF02GIP-5N-E +78 Philips FMD1216MEX MK3 Hybrid Tuner +79 Philips PAL/SECAM multi (FM1216 MK5) +80 Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough +81 Partsnic (Daewoo) PTI-5NF05 +82 Philips CU1216L +83 NXP TDA18271 +84 Sony BTF-Pxn01Z +85 Philips FQ1236 MK5 +86 Tena TNF5337 MFD +87 Xceive 4000 tuner +88 Xceive 5000C tuner +89 Sony BTF-PG472Z PAL/SECAM +90 Sony BTF-PK467Z NTSC-M-JP +91 Sony BTF-PB463Z NTSC-M +============ ===================================================== diff --git a/Documentation/media/v4l-drivers/tuners.rst b/Documentation/media/v4l-drivers/tuners.rst new file mode 100644 index 000000000..c3e8a1cf6 --- /dev/null +++ b/Documentation/media/v4l-drivers/tuners.rst @@ -0,0 +1,131 @@ +Tuner drivers +============= + +Simple tuner Programming +------------------------ + +There are some flavors of Tuner programming APIs. +These differ mainly by the bandswitch byte. + +- L= LG_API (VHF_LO=0x01, VHF_HI=0x02, UHF=0x08, radio=0x04) +- P= PHILIPS_API (VHF_LO=0xA0, VHF_HI=0x90, UHF=0x30, radio=0x04) +- T= TEMIC_API (VHF_LO=0x02, VHF_HI=0x04, UHF=0x01) +- A= ALPS_API (VHF_LO=0x14, VHF_HI=0x12, UHF=0x11) +- M= PHILIPS_MK3 (VHF_LO=0x01, VHF_HI=0x02, UHF=0x04, radio=0x19) + +Tuner Manufacturers +------------------- + +- SAMSUNG Tuner identification: (e.g. TCPM9091PD27) + +.. code-block:: none + + TCP [ABCJLMNQ] 90[89][125] [DP] [ACD] 27 [ABCD] + [ABCJLMNQ]: + A= BG+DK + B= BG + C= I+DK + J= NTSC-Japan + L= Secam LL + M= BG+I+DK + N= NTSC + Q= BG+I+DK+LL + [89]: ? + [125]: + 2: No FM + 5: With FM + [DP]: + D= NTSC + P= PAL + [ACD]: + A= F-connector + C= Phono connector + D= Din Jack + [ABCD]: + 3-wire/I2C tuning, 2-band/3-band + +These Tuners are PHILIPS_API compatible. + +Philips Tuner identification: (e.g. FM1216MF) + +.. code-block:: none + + F[IRMQ]12[1345]6{MF|ME|MP} + F[IRMQ]: + FI12x6: Tuner Series + FR12x6: Tuner + Radio IF + FM12x6: Tuner + FM + FQ12x6: special + FMR12x6: special + TD15xx: Digital Tuner ATSC + 12[1345]6: + 1216: PAL BG + 1236: NTSC + 1246: PAL I + 1256: Pal DK + {MF|ME|MP} + MF: BG LL w/ Secam (Multi France) + ME: BG DK I LL (Multi Europe) + MP: BG DK I (Multi PAL) + MR: BG DK M (?) + MG: BG DKI M (?) + MK2 series PHILIPS_API, most tuners are compatible to this one ! + MK3 series introduced in 2002 w/ PHILIPS_MK3_API + +Temic Tuner identification: (.e.g 4006FH5) + +.. code-block:: none + + 4[01][0136][269]F[HYNR]5 + 40x2: Tuner (5V/33V), TEMIC_API. + 40x6: Tuner 5V + 41xx: Tuner compact + 40x9: Tuner+FM compact + [0136] + xx0x: PAL BG + xx1x: Pal DK, Secam LL + xx3x: NTSC + xx6x: PAL I + F[HYNR]5 + FH5: Pal BG + FY5: others + FN5: multistandard + FR5: w/ FM radio + 3X xxxx: order number with specific connector + Note: Only 40x2 series has TEMIC_API, all newer tuners have PHILIPS_API. + +LG Innotek Tuner: + +- TPI8NSR11 : NTSC J/M (TPI8NSR01 w/FM) (P,210/497) +- TPI8PSB11 : PAL B/G (TPI8PSB01 w/FM) (P,170/450) +- TAPC-I701 : PAL I (TAPC-I001 w/FM) (P,170/450) +- TPI8PSB12 : PAL D/K+B/G (TPI8PSB02 w/FM) (P,170/450) +- TAPC-H701P: NTSC_JP (TAPC-H001P w/FM) (L,170/450) +- TAPC-G701P: PAL B/G (TAPC-G001P w/FM) (L,170/450) +- TAPC-W701P: PAL I (TAPC-W001P w/FM) (L,170/450) +- TAPC-Q703P: PAL D/K (TAPC-Q001P w/FM) (L,170/450) +- TAPC-Q704P: PAL D/K+I (L,170/450) +- TAPC-G702P: PAL D/K+B/G (L,170/450) + +- TADC-H002F: NTSC (L,175/410?; 2-B, C-W+11, W+12-69) +- TADC-M201D: PAL D/K+B/G+I (L,143/425) (sound control at I2C address 0xc8) +- TADC-T003F: NTSC Taiwan (L,175/410?; 2-B, C-W+11, W+12-69) + +Suffix: + - P= Standard phono female socket + - D= IEC female socket + - F= F-connector + +Other Tuners: + +- TCL2002MB-1 : PAL BG + DK =TUNER_LG_PAL_NEW_TAPC +- TCL2002MB-1F: PAL BG + DK w/FM =PHILIPS_PAL +- TCL2002MI-2 : PAL I = ?? + +ALPS Tuners: + +- Most are LG_API compatible +- TSCH6 has ALPS_API (TSCH5 ?) +- TSBE1 has extra API 05,02,08 Control_byte=0xCB Source:[#f1]_ + +.. [#f1] conexant100029b-PCI-Decoder-ApplicationNote.pdf diff --git a/Documentation/media/v4l-drivers/usbvision-cardlist.rst b/Documentation/media/v4l-drivers/usbvision-cardlist.rst new file mode 100644 index 000000000..5a8ffbfc2 --- /dev/null +++ b/Documentation/media/v4l-drivers/usbvision-cardlist.rst @@ -0,0 +1,281 @@ +USBvision cards list +==================== + +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - USB IDs + + * - 0 + - Xanboo + - 0a6f:0400 + + * - 1 + - Belkin USB VideoBus II Adapter + - 050d:0106 + + * - 2 + - Belkin Components USB VideoBus + - 050d:0207 + + * - 3 + - Belkin USB VideoBus II + - 050d:0208 + + * - 4 + - echoFX InterView Lite + - 0571:0002 + + * - 5 + - USBGear USBG-V1 resp. HAMA USB + - 0573:0003 + + * - 6 + - D-Link V100 + - 0573:0400 + + * - 7 + - X10 USB Camera + - 0573:2000 + + * - 8 + - Hauppauge WinTV USB Live (PAL B/G) + - 0573:2d00 + + * - 9 + - Hauppauge WinTV USB Live Pro (NTSC M/N) + - 0573:2d01 + + * - 10 + - Zoran Co. PMD (Nogatech) AV-grabber Manhattan + - 0573:2101 + + * - 11 + - Nogatech USB-TV (NTSC) FM + - 0573:4100 + + * - 12 + - PNY USB-TV (NTSC) FM + - 0573:4110 + + * - 13 + - PixelView PlayTv-USB PRO (PAL) FM + - 0573:4450 + + * - 14 + - ZTV ZT-721 2.4GHz USB A/V Receiver + - 0573:4550 + + * - 15 + - Hauppauge WinTV USB (NTSC M/N) + - 0573:4d00 + + * - 16 + - Hauppauge WinTV USB (PAL B/G) + - 0573:4d01 + + * - 17 + - Hauppauge WinTV USB (PAL I) + - 0573:4d02 + + * - 18 + - Hauppauge WinTV USB (PAL/SECAM L) + - 0573:4d03 + + * - 19 + - Hauppauge WinTV USB (PAL D/K) + - 0573:4d04 + + * - 20 + - Hauppauge WinTV USB (NTSC FM) + - 0573:4d10 + + * - 21 + - Hauppauge WinTV USB (PAL B/G FM) + - 0573:4d11 + + * - 22 + - Hauppauge WinTV USB (PAL I FM) + - 0573:4d12 + + * - 23 + - Hauppauge WinTV USB (PAL D/K FM) + - 0573:4d14 + + * - 24 + - Hauppauge WinTV USB Pro (NTSC M/N) + - 0573:4d2a + + * - 25 + - Hauppauge WinTV USB Pro (NTSC M/N) V2 + - 0573:4d2b + + * - 26 + - Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L) + - 0573:4d2c + + * - 27 + - Hauppauge WinTV USB Pro (NTSC M/N) V3 + - 0573:4d20 + + * - 28 + - Hauppauge WinTV USB Pro (PAL B/G) + - 0573:4d21 + + * - 29 + - Hauppauge WinTV USB Pro (PAL I) + - 0573:4d22 + + * - 30 + - Hauppauge WinTV USB Pro (PAL/SECAM L) + - 0573:4d23 + + * - 31 + - Hauppauge WinTV USB Pro (PAL D/K) + - 0573:4d24 + + * - 32 + - Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) + - 0573:4d25 + + * - 33 + - Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2 + - 0573:4d26 + + * - 34 + - Hauppauge WinTV USB Pro (PAL B/G) V2 + - 0573:4d27 + + * - 35 + - Hauppauge WinTV USB Pro (PAL B/G,D/K) + - 0573:4d28 + + * - 36 + - Hauppauge WinTV USB Pro (PAL I,D/K) + - 0573:4d29 + + * - 37 + - Hauppauge WinTV USB Pro (NTSC M/N FM) + - 0573:4d30 + + * - 38 + - Hauppauge WinTV USB Pro (PAL B/G FM) + - 0573:4d31 + + * - 39 + - Hauppauge WinTV USB Pro (PAL I FM) + - 0573:4d32 + + * - 40 + - Hauppauge WinTV USB Pro (PAL D/K FM) + - 0573:4d34 + + * - 41 + - Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM) + - 0573:4d35 + + * - 42 + - Hauppauge WinTV USB Pro (Temic PAL B/G FM) + - 0573:4d36 + + * - 43 + - Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM) + - 0573:4d37 + + * - 44 + - Hauppauge WinTV USB Pro (NTSC M/N FM) V2 + - 0573:4d38 + + * - 45 + - Camtel Technology USB TV Genie Pro FM Model TVB330 + - 0768:0006 + + * - 46 + - Digital Video Creator I + - 07d0:0001 + + * - 47 + - Global Village GV-007 (NTSC) + - 07d0:0002 + + * - 48 + - Dazzle Fusion Model DVC-50 Rev 1 (NTSC) + - 07d0:0003 + + * - 49 + - Dazzle Fusion Model DVC-80 Rev 1 (PAL) + - 07d0:0004 + + * - 50 + - Dazzle Fusion Model DVC-90 Rev 1 (SECAM) + - 07d0:0005 + + * - 51 + - Eskape Labs MyTV2Go + - 07f8:9104 + + * - 52 + - Pinnacle Studio PCTV USB (PAL) + - 2304:010d + + * - 53 + - Pinnacle Studio PCTV USB (SECAM) + - 2304:0109 + + * - 54 + - Pinnacle Studio PCTV USB (PAL) FM + - 2304:0110 + + * - 55 + - Miro PCTV USB + - 2304:0111 + + * - 56 + - Pinnacle Studio PCTV USB (NTSC) FM + - 2304:0112 + + * - 57 + - Pinnacle Studio PCTV USB (PAL) FM V2 + - 2304:0210 + + * - 58 + - Pinnacle Studio PCTV USB (NTSC) FM V2 + - 2304:0212 + + * - 59 + - Pinnacle Studio PCTV USB (PAL) FM V3 + - 2304:0214 + + * - 60 + - Pinnacle Studio Linx Video input cable (NTSC) + - 2304:0300 + + * - 61 + - Pinnacle Studio Linx Video input cable (PAL) + - 2304:0301 + + * - 62 + - Pinnacle PCTV Bungee USB (PAL) FM + - 2304:0419 + + * - 63 + - Hauppauge WinTv-USB + - 2400:4200 + + * - 64 + - Pinnacle Studio PCTV USB (NTSC) FM V3 + - 2304:0113 + + * - 65 + - Nogatech USB MicroCam NTSC (NV3000N) + - 0573:3000 + + * - 66 + - Nogatech USB MicroCam PAL (NV3001P) + - 0573:3001 diff --git a/Documentation/media/v4l-drivers/uvcvideo.rst b/Documentation/media/v4l-drivers/uvcvideo.rst new file mode 100644 index 000000000..d68b3d59a --- /dev/null +++ b/Documentation/media/v4l-drivers/uvcvideo.rst @@ -0,0 +1,255 @@ +The Linux USB Video Class (UVC) driver +====================================== + +This file documents some driver-specific aspects of the UVC driver, such as +driver-specific ioctls and implementation notes. + +Questions and remarks can be sent to the Linux UVC development mailing list at +linux-uvc-devel@lists.berlios.de. + + +Extension Unit (XU) support +--------------------------- + +Introduction +~~~~~~~~~~~~ + +The UVC specification allows for vendor-specific extensions through extension +units (XUs). The Linux UVC driver supports extension unit controls (XU controls) +through two separate mechanisms: + + - through mappings of XU controls to V4L2 controls + - through a driver-specific ioctl interface + +The first one allows generic V4L2 applications to use XU controls by mapping +certain XU controls onto V4L2 controls, which then show up during ordinary +control enumeration. + +The second mechanism requires uvcvideo-specific knowledge for the application to +access XU controls but exposes the entire UVC XU concept to user space for +maximum flexibility. + +Both mechanisms complement each other and are described in more detail below. + + +Control mappings +~~~~~~~~~~~~~~~~ + +The UVC driver provides an API for user space applications to define so-called +control mappings at runtime. These allow for individual XU controls or byte +ranges thereof to be mapped to new V4L2 controls. Such controls appear and +function exactly like normal V4L2 controls (i.e. the stock controls, such as +brightness, contrast, etc.). However, reading or writing of such a V4L2 controls +triggers a read or write of the associated XU control. + +The ioctl used to create these control mappings is called UVCIOC_CTRL_MAP. +Previous driver versions (before 0.2.0) required another ioctl to be used +beforehand (UVCIOC_CTRL_ADD) to pass XU control information to the UVC driver. +This is no longer necessary as newer uvcvideo versions query the information +directly from the device. + +For details on the UVCIOC_CTRL_MAP ioctl please refer to the section titled +"IOCTL reference" below. + + +3. Driver specific XU control interface + +For applications that need to access XU controls directly, e.g. for testing +purposes, firmware upload, or accessing binary controls, a second mechanism to +access XU controls is provided in the form of a driver-specific ioctl, namely +UVCIOC_CTRL_QUERY. + +A call to this ioctl allows applications to send queries to the UVC driver that +directly map to the low-level UVC control requests. + +In order to make such a request the UVC unit ID of the control's extension unit +and the control selector need to be known. This information either needs to be +hardcoded in the application or queried using other ways such as by parsing the +UVC descriptor or, if available, using the media controller API to enumerate a +device's entities. + +Unless the control size is already known it is necessary to first make a +UVC_GET_LEN requests in order to be able to allocate a sufficiently large buffer +and set the buffer size to the correct value. Similarly, to find out whether +UVC_GET_CUR or UVC_SET_CUR are valid requests for a given control, a +UVC_GET_INFO request should be made. The bits 0 (GET supported) and 1 (SET +supported) of the resulting byte indicate which requests are valid. + +With the addition of the UVCIOC_CTRL_QUERY ioctl the UVCIOC_CTRL_GET and +UVCIOC_CTRL_SET ioctls have become obsolete since their functionality is a +subset of the former ioctl. For the time being they are still supported but +application developers are encouraged to use UVCIOC_CTRL_QUERY instead. + +For details on the UVCIOC_CTRL_QUERY ioctl please refer to the section titled +"IOCTL reference" below. + + +Security +~~~~~~~~ + +The API doesn't currently provide a fine-grained access control facility. The +UVCIOC_CTRL_ADD and UVCIOC_CTRL_MAP ioctls require super user permissions. + +Suggestions on how to improve this are welcome. + + +Debugging +~~~~~~~~~ + +In order to debug problems related to XU controls or controls in general it is +recommended to enable the UVC_TRACE_CONTROL bit in the module parameter 'trace'. +This causes extra output to be written into the system log. + + +IOCTL reference +~~~~~~~~~~~~~~~ + +UVCIOC_CTRL_MAP - Map a UVC control to a V4L2 control +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Argument: struct uvc_xu_control_mapping + +**Description**: + + This ioctl creates a mapping between a UVC control or part of a UVC + control and a V4L2 control. Once mappings are defined, userspace + applications can access vendor-defined UVC control through the V4L2 + control API. + + To create a mapping, applications fill the uvc_xu_control_mapping + structure with information about an existing UVC control defined with + UVCIOC_CTRL_ADD and a new V4L2 control. + + A UVC control can be mapped to several V4L2 controls. For instance, + a UVC pan/tilt control could be mapped to separate pan and tilt V4L2 + controls. The UVC control is divided into non overlapping fields using + the 'size' and 'offset' fields and are then independently mapped to + V4L2 control. + + For signed integer V4L2 controls the data_type field should be set to + UVC_CTRL_DATA_TYPE_SIGNED. Other values are currently ignored. + +**Return value**: + + On success 0 is returned. On error -1 is returned and errno is set + appropriately. + + ENOMEM + Not enough memory to perform the operation. + EPERM + Insufficient privileges (super user privileges are required). + EINVAL + No such UVC control. + EOVERFLOW + The requested offset and size would overflow the UVC control. + EEXIST + Mapping already exists. + +**Data types**: + +.. code-block:: none + + * struct uvc_xu_control_mapping + + __u32 id V4L2 control identifier + __u8 name[32] V4L2 control name + __u8 entity[16] UVC extension unit GUID + __u8 selector UVC control selector + __u8 size V4L2 control size (in bits) + __u8 offset V4L2 control offset (in bits) + enum v4l2_ctrl_type + v4l2_type V4L2 control type + enum uvc_control_data_type + data_type UVC control data type + struct uvc_menu_info + *menu_info Array of menu entries (for menu controls only) + __u32 menu_count Number of menu entries (for menu controls only) + + * struct uvc_menu_info + + __u32 value Menu entry value used by the device + __u8 name[32] Menu entry name + + + * enum uvc_control_data_type + + UVC_CTRL_DATA_TYPE_RAW Raw control (byte array) + UVC_CTRL_DATA_TYPE_SIGNED Signed integer + UVC_CTRL_DATA_TYPE_UNSIGNED Unsigned integer + UVC_CTRL_DATA_TYPE_BOOLEAN Boolean + UVC_CTRL_DATA_TYPE_ENUM Enumeration + UVC_CTRL_DATA_TYPE_BITMASK Bitmask + + +UVCIOC_CTRL_QUERY - Query a UVC XU control +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Argument: struct uvc_xu_control_query + +**Description**: + + This ioctl queries a UVC XU control identified by its extension unit ID + and control selector. + + There are a number of different queries available that closely + correspond to the low-level control requests described in the UVC + specification. These requests are: + + UVC_GET_CUR + Obtain the current value of the control. + UVC_GET_MIN + Obtain the minimum value of the control. + UVC_GET_MAX + Obtain the maximum value of the control. + UVC_GET_DEF + Obtain the default value of the control. + UVC_GET_RES + Query the resolution of the control, i.e. the step size of the + allowed control values. + UVC_GET_LEN + Query the size of the control in bytes. + UVC_GET_INFO + Query the control information bitmap, which indicates whether + get/set requests are supported. + UVC_SET_CUR + Update the value of the control. + + Applications must set the 'size' field to the correct length for the + control. Exceptions are the UVC_GET_LEN and UVC_GET_INFO queries, for + which the size must be set to 2 and 1, respectively. The 'data' field + must point to a valid writable buffer big enough to hold the indicated + number of data bytes. + + Data is copied directly from the device without any driver-side + processing. Applications are responsible for data buffer formatting, + including little-endian/big-endian conversion. This is particularly + important for the result of the UVC_GET_LEN requests, which is always + returned as a little-endian 16-bit integer by the device. + +**Return value**: + + On success 0 is returned. On error -1 is returned and errno is set + appropriately. + + ENOENT + The device does not support the given control or the specified + extension unit could not be found. + ENOBUFS + The specified buffer size is incorrect (too big or too small). + EINVAL + An invalid request code was passed. + EBADRQC + The given request is not supported by the given control. + EFAULT + The data pointer references an inaccessible memory area. + +**Data types**: + +.. code-block:: none + + * struct uvc_xu_control_query + + __u8 unit Extension unit ID + __u8 selector Control selector + __u8 query Request code to send to the device + __u16 size Control data size (in bytes) + __u8 *data Control value diff --git a/Documentation/media/v4l-drivers/v4l-with-ir.rst b/Documentation/media/v4l-drivers/v4l-with-ir.rst new file mode 100644 index 000000000..613e1e79f --- /dev/null +++ b/Documentation/media/v4l-drivers/v4l-with-ir.rst @@ -0,0 +1,73 @@ +Infrared remote control support in video4linux drivers +====================================================== + +Authors: Gerd Hoffmann, Mauro Carvalho Chehab + +Basics +------ + +Most analog and digital TV boards support remote controllers. Several of +them have a microprocessor that receives the IR carriers, convert into +pulse/space sequences and then to scan codes, returning such codes to +userspace ("scancode mode"). Other boards return just the pulse/space +sequences ("raw mode"). + +The support for remote controller in scancode mode is provided by the +standard Linux input layer. The support for raw mode is provided via LIRC. + +In order to check the support and test it, it is suggested to download +the `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_. It provides +two tools to handle remote controllers: + +- ir-keytable: provides a way to query the remote controller, list the + protocols it supports, enable in-kernel support for IR decoder or + switch the protocol and to test the reception of scan codes; + +- ir-ctl: provide tools to handle remote controllers that support raw mode + via LIRC interface. + +Usually, the remote controller module is auto-loaded when the TV card is +detected. However, for a few devices, you need to manually load the +ir-kbd-i2c module. + +How it works +------------ + +The modules register the remote as keyboard within the linux input +layer, i.e. you'll see the keys of the remote as normal key strokes +(if CONFIG_INPUT_KEYBOARD is enabled). + +Using the event devices (CONFIG_INPUT_EVDEV) it is possible for +applications to access the remote via /dev/input/event<n> devices. +The udev/systemd will automatically create the devices. If you install +the `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_, it may also +automatically load a different keytable than the default one. Please see +`v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_ ir-keytable.1 +man page for details. + +The ir-keytable tool is nice for trouble shooting, i.e. to check +whenever the input device is really present, which of the devices it +is, check whenever pressing keys on the remote actually generates +events and the like. You can also use any other input utility that changes +the keymaps, like the input kbd utility. + + +Using with lircd +================ + +The latest versions of the lircd daemon supports reading events from the +linux input layer (via event device). It also supports receiving IR codes +in lirc mode. + + +Using without lircd +=================== + +Xorg recognizes several IR keycodes that have its numerical value lower +than 247. With the advent of Wayland, the input driver got updated too, +and should now accept all keycodes. Yet, you may want to just reasign +the keycodes to something that your favorite media application likes. + +This can be done by setting +`v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_ to load your own +keytable in runtime. Please read ir-keytable.1 man page for details. diff --git a/Documentation/media/v4l-drivers/vivid.rst b/Documentation/media/v4l-drivers/vivid.rst new file mode 100644 index 000000000..089595ce1 --- /dev/null +++ b/Documentation/media/v4l-drivers/vivid.rst @@ -0,0 +1,1329 @@ +The Virtual Video Test Driver (vivid) +===================================== + +This driver emulates video4linux hardware of various types: video capture, video +output, vbi capture and output, radio receivers and transmitters and a software +defined radio receiver. In addition a simple framebuffer device is available for +testing capture and output overlays. + +Up to 64 vivid instances can be created, each with up to 16 inputs and 16 outputs. + +Each input can be a webcam, TV capture device, S-Video capture device or an HDMI +capture device. Each output can be an S-Video output device or an HDMI output +device. + +These inputs and outputs act exactly as a real hardware device would behave. This +allows you to use this driver as a test input for application development, since +you can test the various features without requiring special hardware. + +This document describes the features implemented by this driver: + +- Support for read()/write(), MMAP, USERPTR and DMABUF streaming I/O. +- A large list of test patterns and variations thereof +- Working brightness, contrast, saturation and hue controls +- Support for the alpha color component +- Full colorspace support, including limited/full RGB range +- All possible control types are present +- Support for various pixel aspect ratios and video aspect ratios +- Error injection to test what happens if errors occur +- Supports crop/compose/scale in any combination for both input and output +- Can emulate up to 4K resolutions +- All Field settings are supported for testing interlaced capturing +- Supports all standard YUV and RGB formats, including two multiplanar YUV formats +- Raw and Sliced VBI capture and output support +- Radio receiver and transmitter support, including RDS support +- Software defined radio (SDR) support +- Capture and output overlay support + +These features will be described in more detail below. + +Configuring the driver +---------------------- + +By default the driver will create a single instance that has a video capture +device with webcam, TV, S-Video and HDMI inputs, a video output device with +S-Video and HDMI outputs, one vbi capture device, one vbi output device, one +radio receiver device, one radio transmitter device and one SDR device. + +The number of instances, devices, video inputs and outputs and their types are +all configurable using the following module options: + +- n_devs: + + number of driver instances to create. By default set to 1. Up to 64 + instances can be created. + +- node_types: + + which devices should each driver instance create. An array of + hexadecimal values, one for each instance. The default is 0x1d3d. + Each value is a bitmask with the following meaning: + + - bit 0: Video Capture node + - bit 2-3: VBI Capture node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both + - bit 4: Radio Receiver node + - bit 5: Software Defined Radio Receiver node + - bit 8: Video Output node + - bit 10-11: VBI Output node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both + - bit 12: Radio Transmitter node + - bit 16: Framebuffer for testing overlays + + So to create four instances, the first two with just one video capture + device, the second two with just one video output device you would pass + these module options to vivid: + + .. code-block:: none + + n_devs=4 node_types=0x1,0x1,0x100,0x100 + +- num_inputs: + + the number of inputs, one for each instance. By default 4 inputs + are created for each video capture device. At most 16 inputs can be created, + and there must be at least one. + +- input_types: + + the input types for each instance, the default is 0xe4. This defines + what the type of each input is when the inputs are created for each driver + instance. This is a hexadecimal value with up to 16 pairs of bits, each + pair gives the type and bits 0-1 map to input 0, bits 2-3 map to input 1, + 30-31 map to input 15. Each pair of bits has the following meaning: + + - 00: this is a webcam input + - 01: this is a TV tuner input + - 10: this is an S-Video input + - 11: this is an HDMI input + + So to create a video capture device with 8 inputs where input 0 is a TV + tuner, inputs 1-3 are S-Video inputs and inputs 4-7 are HDMI inputs you + would use the following module options: + + .. code-block:: none + + num_inputs=8 input_types=0xffa9 + +- num_outputs: + + the number of outputs, one for each instance. By default 2 outputs + are created for each video output device. At most 16 outputs can be + created, and there must be at least one. + +- output_types: + + the output types for each instance, the default is 0x02. This defines + what the type of each output is when the outputs are created for each + driver instance. This is a hexadecimal value with up to 16 bits, each bit + gives the type and bit 0 maps to output 0, bit 1 maps to output 1, bit + 15 maps to output 15. The meaning of each bit is as follows: + + - 0: this is an S-Video output + - 1: this is an HDMI output + + So to create a video output device with 8 outputs where outputs 0-3 are + S-Video outputs and outputs 4-7 are HDMI outputs you would use the + following module options: + + .. code-block:: none + + num_outputs=8 output_types=0xf0 + +- vid_cap_nr: + + give the desired videoX start number for each video capture device. + The default is -1 which will just take the first free number. This allows + you to map capture video nodes to specific videoX device nodes. Example: + + .. code-block:: none + + n_devs=4 vid_cap_nr=2,4,6,8 + + This will attempt to assign /dev/video2 for the video capture device of + the first vivid instance, video4 for the next up to video8 for the last + instance. If it can't succeed, then it will just take the next free + number. + +- vid_out_nr: + + give the desired videoX start number for each video output device. + The default is -1 which will just take the first free number. + +- vbi_cap_nr: + + give the desired vbiX start number for each vbi capture device. + The default is -1 which will just take the first free number. + +- vbi_out_nr: + + give the desired vbiX start number for each vbi output device. + The default is -1 which will just take the first free number. + +- radio_rx_nr: + + give the desired radioX start number for each radio receiver device. + The default is -1 which will just take the first free number. + +- radio_tx_nr: + + give the desired radioX start number for each radio transmitter + device. The default is -1 which will just take the first free number. + +- sdr_cap_nr: + + give the desired swradioX start number for each SDR capture device. + The default is -1 which will just take the first free number. + +- ccs_cap_mode: + + specify the allowed video capture crop/compose/scaling combination + for each driver instance. Video capture devices can have any combination + of cropping, composing and scaling capabilities and this will tell the + vivid driver which of those is should emulate. By default the user can + select this through controls. + + The value is either -1 (controlled by the user) or a set of three bits, + each enabling (1) or disabling (0) one of the features: + + - bit 0: + + Enable crop support. Cropping will take only part of the + incoming picture. + - bit 1: + + Enable compose support. Composing will copy the incoming + picture into a larger buffer. + + - bit 2: + + Enable scaling support. Scaling can scale the incoming + picture. The scaler of the vivid driver can enlarge up + or down to four times the original size. The scaler is + very simple and low-quality. Simplicity and speed were + key, not quality. + + Note that this value is ignored by webcam inputs: those enumerate + discrete framesizes and that is incompatible with cropping, composing + or scaling. + +- ccs_out_mode: + + specify the allowed video output crop/compose/scaling combination + for each driver instance. Video output devices can have any combination + of cropping, composing and scaling capabilities and this will tell the + vivid driver which of those is should emulate. By default the user can + select this through controls. + + The value is either -1 (controlled by the user) or a set of three bits, + each enabling (1) or disabling (0) one of the features: + + - bit 0: + + Enable crop support. Cropping will take only part of the + outgoing buffer. + + - bit 1: + + Enable compose support. Composing will copy the incoming + buffer into a larger picture frame. + + - bit 2: + + Enable scaling support. Scaling can scale the incoming + buffer. The scaler of the vivid driver can enlarge up + or down to four times the original size. The scaler is + very simple and low-quality. Simplicity and speed were + key, not quality. + +- multiplanar: + + select whether each device instance supports multi-planar formats, + and thus the V4L2 multi-planar API. By default device instances are + single-planar. + + This module option can override that for each instance. Values are: + + - 1: this is a single-planar instance. + - 2: this is a multi-planar instance. + +- vivid_debug: + + enable driver debugging info + +- no_error_inj: + + if set disable the error injecting controls. This option is + needed in order to run a tool like v4l2-compliance. Tools like that + exercise all controls including a control like 'Disconnect' which + emulates a USB disconnect, making the device inaccessible and so + all tests that v4l2-compliance is doing will fail afterwards. + + There may be other situations as well where you want to disable the + error injection support of vivid. When this option is set, then the + controls that select crop, compose and scale behavior are also + removed. Unless overridden by ccs_cap_mode and/or ccs_out_mode the + will default to enabling crop, compose and scaling. + +- allocators: + + memory allocator selection, default is 0. It specifies the way buffers + will be allocated. + + - 0: vmalloc + - 1: dma-contig + +Taken together, all these module options allow you to precisely customize +the driver behavior and test your application with all sorts of permutations. +It is also very suitable to emulate hardware that is not yet available, e.g. +when developing software for a new upcoming device. + + +Video Capture +------------- + +This is probably the most frequently used feature. The video capture device +can be configured by using the module options num_inputs, input_types and +ccs_cap_mode (see section 1 for more detailed information), but by default +four inputs are configured: a webcam, a TV tuner, an S-Video and an HDMI +input, one input for each input type. Those are described in more detail +below. + +Special attention has been given to the rate at which new frames become +available. The jitter will be around 1 jiffie (that depends on the HZ +configuration of your kernel, so usually 1/100, 1/250 or 1/1000 of a second), +but the long-term behavior is exactly following the framerate. So a +framerate of 59.94 Hz is really different from 60 Hz. If the framerate +exceeds your kernel's HZ value, then you will get dropped frames, but the +frame/field sequence counting will keep track of that so the sequence +count will skip whenever frames are dropped. + + +Webcam Input +~~~~~~~~~~~~ + +The webcam input supports three framesizes: 320x180, 640x360 and 1280x720. It +supports frames per second settings of 10, 15, 25, 30, 50 and 60 fps. Which ones +are available depends on the chosen framesize: the larger the framesize, the +lower the maximum frames per second. + +The initially selected colorspace when you switch to the webcam input will be +sRGB. + + +TV and S-Video Inputs +~~~~~~~~~~~~~~~~~~~~~ + +The only difference between the TV and S-Video input is that the TV has a +tuner. Otherwise they behave identically. + +These inputs support audio inputs as well: one TV and one Line-In. They +both support all TV standards. If the standard is queried, then the Vivid +controls 'Standard Signal Mode' and 'Standard' determine what +the result will be. + +These inputs support all combinations of the field setting. Special care has +been taken to faithfully reproduce how fields are handled for the different +TV standards. This is particularly noticeable when generating a horizontally +moving image so the temporal effect of using interlaced formats becomes clearly +visible. For 50 Hz standards the top field is the oldest and the bottom field +is the newest in time. For 60 Hz standards that is reversed: the bottom field +is the oldest and the top field is the newest in time. + +When you start capturing in V4L2_FIELD_ALTERNATE mode the first buffer will +contain the top field for 50 Hz standards and the bottom field for 60 Hz +standards. This is what capture hardware does as well. + +Finally, for PAL/SECAM standards the first half of the top line contains noise. +This simulates the Wide Screen Signal that is commonly placed there. + +The initially selected colorspace when you switch to the TV or S-Video input +will be SMPTE-170M. + +The pixel aspect ratio will depend on the TV standard. The video aspect ratio +can be selected through the 'Standard Aspect Ratio' Vivid control. +Choices are '4x3', '16x9' which will give letterboxed widescreen video and +'16x9 Anamorphic' which will give full screen squashed anamorphic widescreen +video that will need to be scaled accordingly. + +The TV 'tuner' supports a frequency range of 44-958 MHz. Channels are available +every 6 MHz, starting from 49.25 MHz. For each channel the generated image +will be in color for the +/- 0.25 MHz around it, and in grayscale for ++/- 1 MHz around the channel. Beyond that it is just noise. The VIDIOC_G_TUNER +ioctl will return 100% signal strength for +/- 0.25 MHz and 50% for +/- 1 MHz. +It will also return correct afc values to show whether the frequency is too +low or too high. + +The audio subchannels that are returned are MONO for the +/- 1 MHz range around +a valid channel frequency. When the frequency is within +/- 0.25 MHz of the +channel it will return either MONO, STEREO, either MONO | SAP (for NTSC) or +LANG1 | LANG2 (for others), or STEREO | SAP. + +Which one is returned depends on the chosen channel, each next valid channel +will cycle through the possible audio subchannel combinations. This allows +you to test the various combinations by just switching channels.. + +Finally, for these inputs the v4l2_timecode struct is filled in in the +dequeued v4l2_buffer struct. + + +HDMI Input +~~~~~~~~~~ + +The HDMI inputs supports all CEA-861 and DMT timings, both progressive and +interlaced, for pixelclock frequencies between 25 and 600 MHz. The field +mode for interlaced formats is always V4L2_FIELD_ALTERNATE. For HDMI the +field order is always top field first, and when you start capturing an +interlaced format you will receive the top field first. + +The initially selected colorspace when you switch to the HDMI input or +select an HDMI timing is based on the format resolution: for resolutions +less than or equal to 720x576 the colorspace is set to SMPTE-170M, for +others it is set to REC-709 (CEA-861 timings) or sRGB (VESA DMT timings). + +The pixel aspect ratio will depend on the HDMI timing: for 720x480 is it +set as for the NTSC TV standard, for 720x576 it is set as for the PAL TV +standard, and for all others a 1:1 pixel aspect ratio is returned. + +The video aspect ratio can be selected through the 'DV Timings Aspect Ratio' +Vivid control. Choices are 'Source Width x Height' (just use the +same ratio as the chosen format), '4x3' or '16x9', either of which can +result in pillarboxed or letterboxed video. + +For HDMI inputs it is possible to set the EDID. By default a simple EDID +is provided. You can only set the EDID for HDMI inputs. Internally, however, +the EDID is shared between all HDMI inputs. + +No interpretation is done of the EDID data with the exception of the +physical address. See the CEC section for more details. + +There is a maximum of 15 HDMI inputs (if there are more, then they will be +reduced to 15) since that's the limitation of the EDID physical address. + + +Video Output +------------ + +The video output device can be configured by using the module options +num_outputs, output_types and ccs_out_mode (see section 1 for more detailed +information), but by default two outputs are configured: an S-Video and an +HDMI input, one output for each output type. Those are described in more detail +below. + +Like with video capture the framerate is also exact in the long term. + + +S-Video Output +~~~~~~~~~~~~~~ + +This output supports audio outputs as well: "Line-Out 1" and "Line-Out 2". +The S-Video output supports all TV standards. + +This output supports all combinations of the field setting. + +The initially selected colorspace when you switch to the TV or S-Video input +will be SMPTE-170M. + + +HDMI Output +~~~~~~~~~~~ + +The HDMI output supports all CEA-861 and DMT timings, both progressive and +interlaced, for pixelclock frequencies between 25 and 600 MHz. The field +mode for interlaced formats is always V4L2_FIELD_ALTERNATE. + +The initially selected colorspace when you switch to the HDMI output or +select an HDMI timing is based on the format resolution: for resolutions +less than or equal to 720x576 the colorspace is set to SMPTE-170M, for +others it is set to REC-709 (CEA-861 timings) or sRGB (VESA DMT timings). + +The pixel aspect ratio will depend on the HDMI timing: for 720x480 is it +set as for the NTSC TV standard, for 720x576 it is set as for the PAL TV +standard, and for all others a 1:1 pixel aspect ratio is returned. + +An HDMI output has a valid EDID which can be obtained through VIDIOC_G_EDID. + +There is a maximum of 15 HDMI outputs (if there are more, then they will be +reduced to 15) since that's the limitation of the EDID physical address. See +also the CEC section for more details. + +VBI Capture +----------- + +There are three types of VBI capture devices: those that only support raw +(undecoded) VBI, those that only support sliced (decoded) VBI and those that +support both. This is determined by the node_types module option. In all +cases the driver will generate valid VBI data: for 60 Hz standards it will +generate Closed Caption and XDS data. The closed caption stream will +alternate between "Hello world!" and "Closed captions test" every second. +The XDS stream will give the current time once a minute. For 50 Hz standards +it will generate the Wide Screen Signal which is based on the actual Video +Aspect Ratio control setting and teletext pages 100-159, one page per frame. + +The VBI device will only work for the S-Video and TV inputs, it will give +back an error if the current input is a webcam or HDMI. + + +VBI Output +---------- + +There are three types of VBI output devices: those that only support raw +(undecoded) VBI, those that only support sliced (decoded) VBI and those that +support both. This is determined by the node_types module option. + +The sliced VBI output supports the Wide Screen Signal and the teletext signal +for 50 Hz standards and Closed Captioning + XDS for 60 Hz standards. + +The VBI device will only work for the S-Video output, it will give +back an error if the current output is HDMI. + + +Radio Receiver +-------------- + +The radio receiver emulates an FM/AM/SW receiver. The FM band also supports RDS. +The frequency ranges are: + + - FM: 64 MHz - 108 MHz + - AM: 520 kHz - 1710 kHz + - SW: 2300 kHz - 26.1 MHz + +Valid channels are emulated every 1 MHz for FM and every 100 kHz for AM and SW. +The signal strength decreases the further the frequency is from the valid +frequency until it becomes 0% at +/- 50 kHz (FM) or 5 kHz (AM/SW) from the +ideal frequency. The initial frequency when the driver is loaded is set to +95 MHz. + +The FM receiver supports RDS as well, both using 'Block I/O' and 'Controls' +modes. In the 'Controls' mode the RDS information is stored in read-only +controls. These controls are updated every time the frequency is changed, +or when the tuner status is requested. The Block I/O method uses the read() +interface to pass the RDS blocks on to the application for decoding. + +The RDS signal is 'detected' for +/- 12.5 kHz around the channel frequency, +and the further the frequency is away from the valid frequency the more RDS +errors are randomly introduced into the block I/O stream, up to 50% of all +blocks if you are +/- 12.5 kHz from the channel frequency. All four errors +can occur in equal proportions: blocks marked 'CORRECTED', blocks marked +'ERROR', blocks marked 'INVALID' and dropped blocks. + +The generated RDS stream contains all the standard fields contained in a +0B group, and also radio text and the current time. + +The receiver supports HW frequency seek, either in Bounded mode, Wrap Around +mode or both, which is configurable with the "Radio HW Seek Mode" control. + + +Radio Transmitter +----------------- + +The radio transmitter emulates an FM/AM/SW transmitter. The FM band also supports RDS. +The frequency ranges are: + + - FM: 64 MHz - 108 MHz + - AM: 520 kHz - 1710 kHz + - SW: 2300 kHz - 26.1 MHz + +The initial frequency when the driver is loaded is 95.5 MHz. + +The FM transmitter supports RDS as well, both using 'Block I/O' and 'Controls' +modes. In the 'Controls' mode the transmitted RDS information is configured +using controls, and in 'Block I/O' mode the blocks are passed to the driver +using write(). + + +Software Defined Radio Receiver +------------------------------- + +The SDR receiver has three frequency bands for the ADC tuner: + + - 300 kHz + - 900 kHz - 2800 kHz + - 3200 kHz + +The RF tuner supports 50 MHz - 2000 MHz. + +The generated data contains the In-phase and Quadrature components of a +1 kHz tone that has an amplitude of sqrt(2). + + +Controls +-------- + +Different devices support different controls. The sections below will describe +each control and which devices support them. + + +User Controls - Test Controls +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The Button, Boolean, Integer 32 Bits, Integer 64 Bits, Menu, String, Bitmask and +Integer Menu are controls that represent all possible control types. The Menu +control and the Integer Menu control both have 'holes' in their menu list, +meaning that one or more menu items return EINVAL when VIDIOC_QUERYMENU is called. +Both menu controls also have a non-zero minimum control value. These features +allow you to check if your application can handle such things correctly. +These controls are supported for every device type. + + +User Controls - Video Capture +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The following controls are specific to video capture. + +The Brightness, Contrast, Saturation and Hue controls actually work and are +standard. There is one special feature with the Brightness control: each +video input has its own brightness value, so changing input will restore +the brightness for that input. In addition, each video input uses a different +brightness range (minimum and maximum control values). Switching inputs will +cause a control event to be sent with the V4L2_EVENT_CTRL_CH_RANGE flag set. +This allows you to test controls that can change their range. + +The 'Gain, Automatic' and Gain controls can be used to test volatile controls: +if 'Gain, Automatic' is set, then the Gain control is volatile and changes +constantly. If 'Gain, Automatic' is cleared, then the Gain control is a normal +control. + +The 'Horizontal Flip' and 'Vertical Flip' controls can be used to flip the +image. These combine with the 'Sensor Flipped Horizontally/Vertically' Vivid +controls. + +The 'Alpha Component' control can be used to set the alpha component for +formats containing an alpha channel. + + +User Controls - Audio +~~~~~~~~~~~~~~~~~~~~~ + +The following controls are specific to video capture and output and radio +receivers and transmitters. + +The 'Volume' and 'Mute' audio controls are typical for such devices to +control the volume and mute the audio. They don't actually do anything in +the vivid driver. + + +Vivid Controls +~~~~~~~~~~~~~~ + +These vivid custom controls control the image generation, error injection, etc. + + +Test Pattern Controls +^^^^^^^^^^^^^^^^^^^^^ + +The Test Pattern Controls are all specific to video capture. + +- Test Pattern: + + selects which test pattern to use. Use the CSC Colorbar for + testing colorspace conversions: the colors used in that test pattern + map to valid colors in all colorspaces. The colorspace conversion + is disabled for the other test patterns. + +- OSD Text Mode: + + selects whether the text superimposed on the + test pattern should be shown, and if so, whether only counters should + be displayed or the full text. + +- Horizontal Movement: + + selects whether the test pattern should + move to the left or right and at what speed. + +- Vertical Movement: + + does the same for the vertical direction. + +- Show Border: + + show a two-pixel wide border at the edge of the actual image, + excluding letter or pillarboxing. + +- Show Square: + + show a square in the middle of the image. If the image is + displayed with the correct pixel and image aspect ratio corrections, + then the width and height of the square on the monitor should be + the same. + +- Insert SAV Code in Image: + + adds a SAV (Start of Active Video) code to the image. + This can be used to check if such codes in the image are inadvertently + interpreted instead of being ignored. + +- Insert EAV Code in Image: + + does the same for the EAV (End of Active Video) code. + + +Capture Feature Selection Controls +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +These controls are all specific to video capture. + +- Sensor Flipped Horizontally: + + the image is flipped horizontally and the + V4L2_IN_ST_HFLIP input status flag is set. This emulates the case where + a sensor is for example mounted upside down. + +- Sensor Flipped Vertically: + + the image is flipped vertically and the + V4L2_IN_ST_VFLIP input status flag is set. This emulates the case where + a sensor is for example mounted upside down. + +- Standard Aspect Ratio: + + selects if the image aspect ratio as used for the TV or + S-Video input should be 4x3, 16x9 or anamorphic widescreen. This may + introduce letterboxing. + +- DV Timings Aspect Ratio: + + selects if the image aspect ratio as used for the HDMI + input should be the same as the source width and height ratio, or if + it should be 4x3 or 16x9. This may introduce letter or pillarboxing. + +- Timestamp Source: + + selects when the timestamp for each buffer is taken. + +- Colorspace: + + selects which colorspace should be used when generating the image. + This only applies if the CSC Colorbar test pattern is selected, + otherwise the test pattern will go through unconverted. + This behavior is also what you want, since a 75% Colorbar + should really have 75% signal intensity and should not be affected + by colorspace conversions. + + Changing the colorspace will result in the V4L2_EVENT_SOURCE_CHANGE + to be sent since it emulates a detected colorspace change. + +- Transfer Function: + + selects which colorspace transfer function should be used when + generating an image. This only applies if the CSC Colorbar test pattern is + selected, otherwise the test pattern will go through unconverted. + This behavior is also what you want, since a 75% Colorbar + should really have 75% signal intensity and should not be affected + by colorspace conversions. + + Changing the transfer function will result in the V4L2_EVENT_SOURCE_CHANGE + to be sent since it emulates a detected colorspace change. + +- Y'CbCr Encoding: + + selects which Y'CbCr encoding should be used when generating + a Y'CbCr image. This only applies if the format is set to a Y'CbCr format + as opposed to an RGB format. + + Changing the Y'CbCr encoding will result in the V4L2_EVENT_SOURCE_CHANGE + to be sent since it emulates a detected colorspace change. + +- Quantization: + + selects which quantization should be used for the RGB or Y'CbCr + encoding when generating the test pattern. + + Changing the quantization will result in the V4L2_EVENT_SOURCE_CHANGE + to be sent since it emulates a detected colorspace change. + +- Limited RGB Range (16-235): + + selects if the RGB range of the HDMI source should + be limited or full range. This combines with the Digital Video 'Rx RGB + Quantization Range' control and can be used to test what happens if + a source provides you with the wrong quantization range information. + See the description of that control for more details. + +- Apply Alpha To Red Only: + + apply the alpha channel as set by the 'Alpha Component' + user control to the red color of the test pattern only. + +- Enable Capture Cropping: + + enables crop support. This control is only present if + the ccs_cap_mode module option is set to the default value of -1 and if + the no_error_inj module option is set to 0 (the default). + +- Enable Capture Composing: + + enables composing support. This control is only + present if the ccs_cap_mode module option is set to the default value of + -1 and if the no_error_inj module option is set to 0 (the default). + +- Enable Capture Scaler: + + enables support for a scaler (maximum 4 times upscaling + and downscaling). This control is only present if the ccs_cap_mode + module option is set to the default value of -1 and if the no_error_inj + module option is set to 0 (the default). + +- Maximum EDID Blocks: + + determines how many EDID blocks the driver supports. + Note that the vivid driver does not actually interpret new EDID + data, it just stores it. It allows for up to 256 EDID blocks + which is the maximum supported by the standard. + +- Fill Percentage of Frame: + + can be used to draw only the top X percent + of the image. Since each frame has to be drawn by the driver, this + demands a lot of the CPU. For large resolutions this becomes + problematic. By drawing only part of the image this CPU load can + be reduced. + + +Output Feature Selection Controls +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +These controls are all specific to video output. + +- Enable Output Cropping: + + enables crop support. This control is only present if + the ccs_out_mode module option is set to the default value of -1 and if + the no_error_inj module option is set to 0 (the default). + +- Enable Output Composing: + + enables composing support. This control is only + present if the ccs_out_mode module option is set to the default value of + -1 and if the no_error_inj module option is set to 0 (the default). + +- Enable Output Scaler: + + enables support for a scaler (maximum 4 times upscaling + and downscaling). This control is only present if the ccs_out_mode + module option is set to the default value of -1 and if the no_error_inj + module option is set to 0 (the default). + + +Error Injection Controls +^^^^^^^^^^^^^^^^^^^^^^^^ + +The following two controls are only valid for video and vbi capture. + +- Standard Signal Mode: + + selects the behavior of VIDIOC_QUERYSTD: what should it return? + + Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE + to be sent since it emulates a changed input condition (e.g. a cable + was plugged in or out). + +- Standard: + + selects the standard that VIDIOC_QUERYSTD should return if the + previous control is set to "Selected Standard". + + Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE + to be sent since it emulates a changed input standard. + + +The following two controls are only valid for video capture. + +- DV Timings Signal Mode: + + selects the behavior of VIDIOC_QUERY_DV_TIMINGS: what + should it return? + + Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE + to be sent since it emulates a changed input condition (e.g. a cable + was plugged in or out). + +- DV Timings: + + selects the timings the VIDIOC_QUERY_DV_TIMINGS should return + if the previous control is set to "Selected DV Timings". + + Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE + to be sent since it emulates changed input timings. + + +The following controls are only present if the no_error_inj module option +is set to 0 (the default). These controls are valid for video and vbi +capture and output streams and for the SDR capture device except for the +Disconnect control which is valid for all devices. + +- Wrap Sequence Number: + + test what happens when you wrap the sequence number in + struct v4l2_buffer around. + +- Wrap Timestamp: + + test what happens when you wrap the timestamp in struct + v4l2_buffer around. + +- Percentage of Dropped Buffers: + + sets the percentage of buffers that + are never returned by the driver (i.e., they are dropped). + +- Disconnect: + + emulates a USB disconnect. The device will act as if it has + been disconnected. Only after all open filehandles to the device + node have been closed will the device become 'connected' again. + +- Inject V4L2_BUF_FLAG_ERROR: + + when pressed, the next frame returned by + the driver will have the error flag set (i.e. the frame is marked + corrupt). + +- Inject VIDIOC_REQBUFS Error: + + when pressed, the next REQBUFS or CREATE_BUFS + ioctl call will fail with an error. To be precise: the videobuf2 + queue_setup() op will return -EINVAL. + +- Inject VIDIOC_QBUF Error: + + when pressed, the next VIDIOC_QBUF or + VIDIOC_PREPARE_BUFFER ioctl call will fail with an error. To be + precise: the videobuf2 buf_prepare() op will return -EINVAL. + +- Inject VIDIOC_STREAMON Error: + + when pressed, the next VIDIOC_STREAMON ioctl + call will fail with an error. To be precise: the videobuf2 + start_streaming() op will return -EINVAL. + +- Inject Fatal Streaming Error: + + when pressed, the streaming core will be + marked as having suffered a fatal error, the only way to recover + from that is to stop streaming. To be precise: the videobuf2 + vb2_queue_error() function is called. + + +VBI Raw Capture Controls +^^^^^^^^^^^^^^^^^^^^^^^^ + +- Interlaced VBI Format: + + if set, then the raw VBI data will be interlaced instead + of providing it grouped by field. + + +Digital Video Controls +~~~~~~~~~~~~~~~~~~~~~~ + +- Rx RGB Quantization Range: + + sets the RGB quantization detection of the HDMI + input. This combines with the Vivid 'Limited RGB Range (16-235)' + control and can be used to test what happens if a source provides + you with the wrong quantization range information. This can be tested + by selecting an HDMI input, setting this control to Full or Limited + range and selecting the opposite in the 'Limited RGB Range (16-235)' + control. The effect is easy to see if the 'Gray Ramp' test pattern + is selected. + +- Tx RGB Quantization Range: + + sets the RGB quantization detection of the HDMI + output. It is currently not used for anything in vivid, but most HDMI + transmitters would typically have this control. + +- Transmit Mode: + + sets the transmit mode of the HDMI output to HDMI or DVI-D. This + affects the reported colorspace since DVI_D outputs will always use + sRGB. + + +FM Radio Receiver Controls +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- RDS Reception: + + set if the RDS receiver should be enabled. + +- RDS Program Type: + + +- RDS PS Name: + + +- RDS Radio Text: + + +- RDS Traffic Announcement: + + +- RDS Traffic Program: + + +- RDS Music: + + these are all read-only controls. If RDS Rx I/O Mode is set to + "Block I/O", then they are inactive as well. If RDS Rx I/O Mode is set + to "Controls", then these controls report the received RDS data. + +.. note:: + The vivid implementation of this is pretty basic: they are only + updated when you set a new frequency or when you get the tuner status + (VIDIOC_G_TUNER). + +- Radio HW Seek Mode: + + can be one of "Bounded", "Wrap Around" or "Both". This + determines if VIDIOC_S_HW_FREQ_SEEK will be bounded by the frequency + range or wrap-around or if it is selectable by the user. + +- Radio Programmable HW Seek: + + if set, then the user can provide the lower and + upper bound of the HW Seek. Otherwise the frequency range boundaries + will be used. + +- Generate RBDS Instead of RDS: + + if set, then generate RBDS (the US variant of + RDS) data instead of RDS (European-style RDS). This affects only the + PICODE and PTY codes. + +- RDS Rx I/O Mode: + + this can be "Block I/O" where the RDS blocks have to be read() + by the application, or "Controls" where the RDS data is provided by + the RDS controls mentioned above. + + +FM Radio Modulator Controls +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- RDS Program ID: + + +- RDS Program Type: + + +- RDS PS Name: + + +- RDS Radio Text: + + +- RDS Stereo: + + +- RDS Artificial Head: + + +- RDS Compressed: + + +- RDS Dynamic PTY: + + +- RDS Traffic Announcement: + + +- RDS Traffic Program: + + +- RDS Music: + + these are all controls that set the RDS data that is transmitted by + the FM modulator. + +- RDS Tx I/O Mode: + + this can be "Block I/O" where the application has to use write() + to pass the RDS blocks to the driver, or "Controls" where the RDS data + is Provided by the RDS controls mentioned above. + + +Video, VBI and RDS Looping +-------------------------- + +The vivid driver supports looping of video output to video input, VBI output +to VBI input and RDS output to RDS input. For video/VBI looping this emulates +as if a cable was hooked up between the output and input connector. So video +and VBI looping is only supported between S-Video and HDMI inputs and outputs. +VBI is only valid for S-Video as it makes no sense for HDMI. + +Since radio is wireless this looping always happens if the radio receiver +frequency is close to the radio transmitter frequency. In that case the radio +transmitter will 'override' the emulated radio stations. + +Looping is currently supported only between devices created by the same +vivid driver instance. + + +Video and Sliced VBI looping +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The way to enable video/VBI looping is currently fairly crude. A 'Loop Video' +control is available in the "Vivid" control class of the video +capture and VBI capture devices. When checked the video looping will be enabled. +Once enabled any video S-Video or HDMI input will show a static test pattern +until the video output has started. At that time the video output will be +looped to the video input provided that: + +- the input type matches the output type. So the HDMI input cannot receive + video from the S-Video output. + +- the video resolution of the video input must match that of the video output. + So it is not possible to loop a 50 Hz (720x576) S-Video output to a 60 Hz + (720x480) S-Video input, or a 720p60 HDMI output to a 1080p30 input. + +- the pixel formats must be identical on both sides. Otherwise the driver would + have to do pixel format conversion as well, and that's taking things too far. + +- the field settings must be identical on both sides. Same reason as above: + requiring the driver to convert from one field format to another complicated + matters too much. This also prohibits capturing with 'Field Top' or 'Field + Bottom' when the output video is set to 'Field Alternate'. This combination, + while legal, became too complicated to support. Both sides have to be 'Field + Alternate' for this to work. Also note that for this specific case the + sequence and field counting in struct v4l2_buffer on the capture side may not + be 100% accurate. + +- field settings V4L2_FIELD_SEQ_TB/BT are not supported. While it is possible to + implement this, it would mean a lot of work to get this right. Since these + field values are rarely used the decision was made not to implement this for + now. + +- on the input side the "Standard Signal Mode" for the S-Video input or the + "DV Timings Signal Mode" for the HDMI input should be configured so that a + valid signal is passed to the video input. + +The framerates do not have to match, although this might change in the future. + +By default you will see the OSD text superimposed on top of the looped video. +This can be turned off by changing the "OSD Text Mode" control of the video +capture device. + +For VBI looping to work all of the above must be valid and in addition the vbi +output must be configured for sliced VBI. The VBI capture side can be configured +for either raw or sliced VBI. Note that at the moment only CC/XDS (60 Hz formats) +and WSS (50 Hz formats) VBI data is looped. Teletext VBI data is not looped. + + +Radio & RDS Looping +~~~~~~~~~~~~~~~~~~~ + +As mentioned in section 6 the radio receiver emulates stations are regular +frequency intervals. Depending on the frequency of the radio receiver a +signal strength value is calculated (this is returned by VIDIOC_G_TUNER). +However, it will also look at the frequency set by the radio transmitter and +if that results in a higher signal strength than the settings of the radio +transmitter will be used as if it was a valid station. This also includes +the RDS data (if any) that the transmitter 'transmits'. This is received +faithfully on the receiver side. Note that when the driver is loaded the +frequencies of the radio receiver and transmitter are not identical, so +initially no looping takes place. + + +Cropping, Composing, Scaling +---------------------------- + +This driver supports cropping, composing and scaling in any combination. Normally +which features are supported can be selected through the Vivid controls, +but it is also possible to hardcode it when the module is loaded through the +ccs_cap_mode and ccs_out_mode module options. See section 1 on the details of +these module options. + +This allows you to test your application for all these variations. + +Note that the webcam input never supports cropping, composing or scaling. That +only applies to the TV/S-Video/HDMI inputs and outputs. The reason is that +webcams, including this virtual implementation, normally use +VIDIOC_ENUM_FRAMESIZES to list a set of discrete framesizes that it supports. +And that does not combine with cropping, composing or scaling. This is +primarily a limitation of the V4L2 API which is carefully reproduced here. + +The minimum and maximum resolutions that the scaler can achieve are 16x16 and +(4096 * 4) x (2160 x 4), but it can only scale up or down by a factor of 4 or +less. So for a source resolution of 1280x720 the minimum the scaler can do is +320x180 and the maximum is 5120x2880. You can play around with this using the +qv4l2 test tool and you will see these dependencies. + +This driver also supports larger 'bytesperline' settings, something that +VIDIOC_S_FMT allows but that few drivers implement. + +The scaler is a simple scaler that uses the Coarse Bresenham algorithm. It's +designed for speed and simplicity, not quality. + +If the combination of crop, compose and scaling allows it, then it is possible +to change crop and compose rectangles on the fly. + + +Formats +------- + +The driver supports all the regular packed and planar 4:4:4, 4:2:2 and 4:2:0 +YUYV formats, 8, 16, 24 and 32 RGB packed formats and various multiplanar +formats. + +The alpha component can be set through the 'Alpha Component' User control +for those formats that support it. If the 'Apply Alpha To Red Only' control +is set, then the alpha component is only used for the color red and set to +0 otherwise. + +The driver has to be configured to support the multiplanar formats. By default +the driver instances are single-planar. This can be changed by setting the +multiplanar module option, see section 1 for more details on that option. + +If the driver instance is using the multiplanar formats/API, then the first +single planar format (YUYV) and the multiplanar NV16M and NV61M formats the +will have a plane that has a non-zero data_offset of 128 bytes. It is rare for +data_offset to be non-zero, so this is a useful feature for testing applications. + +Video output will also honor any data_offset that the application set. + + +Capture Overlay +--------------- + +Note: capture overlay support is implemented primarily to test the existing +V4L2 capture overlay API. In practice few if any GPUs support such overlays +anymore, and neither are they generally needed anymore since modern hardware +is so much more capable. By setting flag 0x10000 in the node_types module +option the vivid driver will create a simple framebuffer device that can be +used for testing this API. Whether this API should be used for new drivers is +questionable. + +This driver has support for a destructive capture overlay with bitmap clipping +and list clipping (up to 16 rectangles) capabilities. Overlays are not +supported for multiplanar formats. It also honors the struct v4l2_window field +setting: if it is set to FIELD_TOP or FIELD_BOTTOM and the capture setting is +FIELD_ALTERNATE, then only the top or bottom fields will be copied to the overlay. + +The overlay only works if you are also capturing at that same time. This is a +vivid limitation since it copies from a buffer to the overlay instead of +filling the overlay directly. And if you are not capturing, then no buffers +are available to fill. + +In addition, the pixelformat of the capture format and that of the framebuffer +must be the same for the overlay to work. Otherwise VIDIOC_OVERLAY will return +an error. + +In order to really see what it going on you will need to create two vivid +instances: the first with a framebuffer enabled. You configure the capture +overlay of the second instance to use the framebuffer of the first, then +you start capturing in the second instance. For the first instance you setup +the output overlay for the video output, turn on video looping and capture +to see the blended framebuffer overlay that's being written to by the second +instance. This setup would require the following commands: + +.. code-block:: none + + $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1 + $ v4l2-ctl -d1 --find-fb + /dev/fb1 is the framebuffer associated with base address 0x12800000 + $ sudo v4l2-ctl -d2 --set-fbuf fb=1 + $ v4l2-ctl -d1 --set-fbuf fb=1 + $ v4l2-ctl -d0 --set-fmt-video=pixelformat='AR15' + $ v4l2-ctl -d1 --set-fmt-video-out=pixelformat='AR15' + $ v4l2-ctl -d2 --set-fmt-video=pixelformat='AR15' + $ v4l2-ctl -d0 -i2 + $ v4l2-ctl -d2 -i2 + $ v4l2-ctl -d2 -c horizontal_movement=4 + $ v4l2-ctl -d1 --overlay=1 + $ v4l2-ctl -d1 -c loop_video=1 + $ v4l2-ctl -d2 --stream-mmap --overlay=1 + +And from another console: + +.. code-block:: none + + $ v4l2-ctl -d1 --stream-out-mmap + +And yet another console: + +.. code-block:: none + + $ qv4l2 + +and start streaming. + +As you can see, this is not for the faint of heart... + + +Output Overlay +-------------- + +Note: output overlays are primarily implemented in order to test the existing +V4L2 output overlay API. Whether this API should be used for new drivers is +questionable. + +This driver has support for an output overlay and is capable of: + + - bitmap clipping, + - list clipping (up to 16 rectangles) + - chromakey + - source chromakey + - global alpha + - local alpha + - local inverse alpha + +Output overlays are not supported for multiplanar formats. In addition, the +pixelformat of the capture format and that of the framebuffer must be the +same for the overlay to work. Otherwise VIDIOC_OVERLAY will return an error. + +Output overlays only work if the driver has been configured to create a +framebuffer by setting flag 0x10000 in the node_types module option. The +created framebuffer has a size of 720x576 and supports ARGB 1:5:5:5 and +RGB 5:6:5. + +In order to see the effects of the various clipping, chromakeying or alpha +processing capabilities you need to turn on video looping and see the results +on the capture side. The use of the clipping, chromakeying or alpha processing +capabilities will slow down the video loop considerably as a lot of checks have +to be done per pixel. + + +CEC (Consumer Electronics Control) +---------------------------------- + +If there are HDMI inputs then a CEC adapter will be created that has +the same number of input ports. This is the equivalent of e.g. a TV that +has that number of inputs. Each HDMI output will also create a +CEC adapter that is hooked up to the corresponding input port, or (if there +are more outputs than inputs) is not hooked up at all. In other words, +this is the equivalent of hooking up each output device to an input port of +the TV. Any remaining output devices remain unconnected. + +The EDID that each output reads reports a unique CEC physical address that is +based on the physical address of the EDID of the input. So if the EDID of the +receiver has physical address A.B.0.0, then each output will see an EDID +containing physical address A.B.C.0 where C is 1 to the number of inputs. If +there are more outputs than inputs then the remaining outputs have a CEC adapter +that is disabled and reports an invalid physical address. + + +Some Future Improvements +------------------------ + +Just as a reminder and in no particular order: + +- Add a virtual alsa driver to test audio +- Add virtual sub-devices and media controller support +- Some support for testing compressed video +- Add support to loop raw VBI output to raw VBI input +- Add support to loop teletext sliced VBI output to VBI input +- Fix sequence/field numbering when looping of video with alternate fields +- Add support for V4L2_CID_BG_COLOR for video outputs +- Add ARGB888 overlay support: better testing of the alpha channel +- Improve pixel aspect support in the tpg code by passing a real v4l2_fract +- Use per-queue locks and/or per-device locks to improve throughput +- Add support to loop from a specific output to a specific input across + vivid instances +- The SDR radio should use the same 'frequencies' for stations as the normal + radio receiver, and give back noise if the frequency doesn't match up with + a station frequency +- Make a thread for the RDS generation, that would help in particular for the + "Controls" RDS Rx I/O Mode as the read-only RDS controls could be updated + in real-time. +- Changing the EDID should cause hotplug detect emulation to happen. diff --git a/Documentation/media/v4l-drivers/zoran.rst b/Documentation/media/v4l-drivers/zoran.rst new file mode 100644 index 000000000..c3a0f7bc2 --- /dev/null +++ b/Documentation/media/v4l-drivers/zoran.rst @@ -0,0 +1,581 @@ +The Zoran driver +================ + +unified zoran driver (zr360x7, zoran, buz, dc10(+), dc30(+), lml33) + +website: http://mjpeg.sourceforge.net/driver-zoran/ + + +Frequently Asked Questions +-------------------------- + +What cards are supported +------------------------ + +Iomega Buz, Linux Media Labs LML33/LML33R10, Pinnacle/Miro +DC10/DC10+/DC30/DC30+ and related boards (available under various names). + +Iomega Buz +~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Philips saa7111 TV decoder +* Philips saa7185 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, saa7111, saa7185, zr36060, zr36067 + +Inputs/outputs: Composite and S-video + +Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps) + +Card number: 7 + +AverMedia 6 Eyes AVS6EYES +~~~~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Samsung ks0127 TV decoder +* Conexant bt866 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, ks0127, bt866, zr36060, zr36067 + +Inputs/outputs: + Six physical inputs. 1-6 are composite, + 1-2, 3-4, 5-6 doubles as S-video, + 1-3 triples as component. + One composite output. + +Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps) + +Card number: 8 + +.. note:: + + Not autodetected, card=8 is necessary. + +Linux Media Labs LML33 +~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Brooktree bt819 TV decoder +* Brooktree bt856 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, bt819, bt856, zr36060, zr36067 + +Inputs/outputs: Composite and S-video + +Norms: PAL (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps) + +Card number: 5 + +Linux Media Labs LML33R10 +~~~~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Philips saa7114 TV decoder +* Analog Devices adv7170 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, saa7114, adv7170, zr36060, zr36067 + +Inputs/outputs: Composite and S-video + +Norms: PAL (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps) + +Card number: 6 + +Pinnacle/Miro DC10(new) +~~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36057 PCI controller +* Zoran zr36060 MJPEG codec +* Philips saa7110a TV decoder +* Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, saa7110, adv7175, zr36060, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 1 + +Pinnacle/Miro DC10+ +~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Philips saa7110a TV decoder +* Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, sa7110, adv7175, zr36060, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 2 + +Pinnacle/Miro DC10(old) +~~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36057 PCI controller +* Zoran zr36050 MJPEG codec +* Zoran zr36016 Video Front End or Fuji md0211 Video Front End (clone?) +* Micronas vpx3220a TV decoder +* mse3000 TV encoder or Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, vpx3220, mse3000/adv7175, zr36050, zr36016, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 0 + +Pinnacle/Miro DC30 +~~~~~~~~~~~~~~~~~~ + +* Zoran zr36057 PCI controller +* Zoran zr36050 MJPEG codec +* Zoran zr36016 Video Front End +* Micronas vpx3225d/vpx3220a/vpx3216b TV decoder +* Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, vpx3220/vpx3224, adv7175, zr36050, zr36016, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 3 + +Pinnacle/Miro DC30+ +~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36050 MJPEG codec +* Zoran zr36016 Video Front End +* Micronas vpx3225d/vpx3220a/vpx3216b TV decoder +* Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, vpx3220/vpx3224, adv7175, zr36050, zr36015, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 4 + +.. note:: + + #) No module for the mse3000 is available yet + #) No module for the vpx3224 is available yet + +1.1 What the TV decoder can do an what not +------------------------------------------ + +The best know TV standards are NTSC/PAL/SECAM. but for decoding a frame that +information is not enough. There are several formats of the TV standards. +And not every TV decoder is able to handle every format. Also the every +combination is supported by the driver. There are currently 11 different +tv broadcast formats all aver the world. + +The CCIR defines parameters needed for broadcasting the signal. +The CCIR has defined different standards: A,B,D,E,F,G,D,H,I,K,K1,L,M,N,... +The CCIR says not much about the colorsystem used !!! +And talking about a colorsystem says not to much about how it is broadcast. + +The CCIR standards A,E,F are not used any more. + +When you speak about NTSC, you usually mean the standard: CCIR - M using +the NTSC colorsystem which is used in the USA, Japan, Mexico, Canada +and a few others. + +When you talk about PAL, you usually mean: CCIR - B/G using the PAL +colorsystem which is used in many Countries. + +When you talk about SECAM, you mean: CCIR - L using the SECAM Colorsystem +which is used in France, and a few others. + +There the other version of SECAM, CCIR - D/K is used in Bulgaria, China, +Slovakai, Hungary, Korea (Rep.), Poland, Rumania and a others. + +The CCIR - H uses the PAL colorsystem (sometimes SECAM) and is used in +Egypt, Libya, Sri Lanka, Syrain Arab. Rep. + +The CCIR - I uses the PAL colorsystem, and is used in Great Britain, Hong Kong, +Ireland, Nigeria, South Africa. + +The CCIR - N uses the PAL colorsystem and PAL frame size but the NTSC framerate, +and is used in Argentinia, Uruguay, an a few others + +We do not talk about how the audio is broadcast ! + +A rather good sites about the TV standards are: +http://www.sony.jp/support/ +http://info.electronicwerkstatt.de/bereiche/fernsehtechnik/frequenzen_und_normen/Fernsehnormen/ +and http://www.cabl.com/restaurant/channel.html + +Other weird things around: NTSC 4.43 is a modificated NTSC, which is mainly +used in PAL VCR's that are able to play back NTSC. PAL 60 seems to be the same +as NTSC 4.43 . The Datasheets also talk about NTSC 44, It seems as if it would +be the same as NTSC 4.43. +NTSC Combs seems to be a decoder mode where the decoder uses a comb filter +to split coma and luma instead of a Delay line. + +But I did not defiantly find out what NTSC Comb is. + +Philips saa7111 TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1997, is used in the BUZ and +- can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC N, NTSC 4.43 and SECAM + +Philips saa7110a TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1995, is used in the Pinnacle/Miro DC10(new), DC10+ and +- can handle: PAL B/G, NTSC M and SECAM + +Philips saa7114 TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 2000, is used in the LML33R10 and +- can handle: PAL B/G/D/H/I/N, PAL N, PAL M, NTSC M, NTSC 4.43 and SECAM + +Brooktree bt819 TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1996, and is used in the LML33 and +- can handle: PAL B/D/G/H/I, NTSC M + +Micronas vpx3220a TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1996, is used in the DC30 and DC30+ and +- can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC 44, PAL 60, SECAM,NTSC Comb + +Samsung ks0127 TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~ + +- is used in the AVS6EYES card and +- can handle: NTSC-M/N/44, PAL-M/N/B/G/H/I/D/K/L and SECAM + + +What the TV encoder can do an what not +-------------------------------------- + +The TV encoder are doing the "same" as the decoder, but in the oder direction. +You feed them digital data and the generate a Composite or SVHS signal. +For information about the colorsystems and TV norm take a look in the +TV decoder section. + +Philips saa7185 TV Encoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1996, is used in the BUZ +- can generate: PAL B/G, NTSC M + +Brooktree bt856 TV Encoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1994, is used in the LML33 +- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M, PAL-N (Argentina) + +Analog Devices adv7170 TV Encoder +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 2000, is used in the LML300R10 +- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M, PAL 60 + +Analog Devices adv7175 TV Encoder +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1996, is used in the DC10, DC10+, DC10 old, DC30, DC30+ +- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M + +ITT mse3000 TV encoder +~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1991, is used in the DC10 old +- can generate: PAL , NTSC , SECAM + +Conexant bt866 TV encoder +~~~~~~~~~~~~~~~~~~~~~~~~~ + +- is used in AVS6EYES, and +- can generate: NTSC/PAL, PALM, PALN + +The adv717x, should be able to produce PAL N. But you find nothing PAL N +specific in the registers. Seem that you have to reuse a other standard +to generate PAL N, maybe it would work if you use the PAL M settings. + +How do I get this damn thing to work +------------------------------------ + +Load zr36067.o. If it can't autodetect your card, use the card=X insmod +option with X being the card number as given in the previous section. +To have more than one card, use card=X1[,X2[,X3,[X4[..]]]] + +To automate this, add the following to your /etc/modprobe.d/zoran.conf: + +options zr36067 card=X1[,X2[,X3[,X4[..]]]] +alias char-major-81-0 zr36067 + +One thing to keep in mind is that this doesn't load zr36067.o itself yet. It +just automates loading. If you start using xawtv, the device won't load on +some systems, since you're trying to load modules as a user, which is not +allowed ("permission denied"). A quick workaround is to add 'Load "v4l"' to +XF86Config-4 when you use X by default, or to run 'v4l-conf -c <device>' in +one of your startup scripts (normally rc.local) if you don't use X. Both +make sure that the modules are loaded on startup, under the root account. + +What mainboard should I use (or why doesn't my card work) +--------------------------------------------------------- + + +<insert lousy disclaimer here>. In short: good=SiS/Intel, bad=VIA. + +Experience tells us that people with a Buz, on average, have more problems +than users with a DC10+/LML33. Also, it tells us that people owning a VIA- +based mainboard (ktXXX, MVP3) have more problems than users with a mainboard +based on a different chipset. Here's some notes from Andrew Stevens: + +Here's my experience of using LML33 and Buz on various motherboards: + +- VIA MVP3 + - Forget it. Pointless. Doesn't work. +- Intel 430FX (Pentium 200) + - LML33 perfect, Buz tolerable (3 or 4 frames dropped per movie) +- Intel 440BX (early stepping) + - LML33 tolerable. Buz starting to get annoying (6-10 frames/hour) +- Intel 440BX (late stepping) + - Buz tolerable, LML3 almost perfect (occasional single frame drops) +- SiS735 + - LML33 perfect, Buz tolerable. +- VIA KT133(*) + - LML33 starting to get annoying, Buz poor enough that I have up. + +- Both 440BX boards were dual CPU versions. + +Bernhard Praschinger later added: + +- AMD 751 + - Buz perfect-tolerable +- AMD 760 + - Buz perfect-tolerable + +In general, people on the user mailinglist won't give you much of a chance +if you have a VIA-based motherboard. They may be cheap, but sometimes, you'd +rather want to spend some more money on better boards. In general, VIA +mainboard's IDE/PCI performance will also suck badly compared to others. +You'll noticed the DC10+/DC30+ aren't mentioned anywhere in the overview. +Basically, you can assume that if the Buz works, the LML33 will work too. If +the LML33 works, the DC10+/DC30+ will work too. They're most tolerant to +different mainboard chipsets from all of the supported cards. + +If you experience timeouts during capture, buy a better mainboard or lower +the quality/buffersize during capture (see 'Concerning buffer sizes, quality, +output size etc.'). If it hangs, there's little we can do as of now. Check +your IRQs and make sure the card has its own interrupts. + +Programming interface +--------------------- + +This driver conforms to video4linux2. Support for V4L1 and for the custom +zoran ioctls has been removed in kernel 2.6.38. + +For programming example, please, look at lavrec.c and lavplay.c code in +the MJPEG-tools (http://mjpeg.sf.net/). + +Additional notes for software developers: + + The driver returns maxwidth and maxheight parameters according to + the current TV standard (norm). Therefore, the software which + communicates with the driver and "asks" for these parameters should + first set the correct norm. Well, it seems logically correct: TV + standard is "more constant" for current country than geometry + settings of a variety of TV capture cards which may work in ITU or + square pixel format. + +Applications +------------ + +Applications known to work with this driver: + +TV viewing: + +* xawtv +* kwintv +* probably any TV application that supports video4linux or video4linux2. + +MJPEG capture/playback: + +* mjpegtools/lavtools (or Linux Video Studio) +* gstreamer +* mplayer + +General raw capture: + +* xawtv +* gstreamer +* probably any application that supports video4linux or video4linux2 + +Video editing: + +* Cinelerra +* MainActor +* mjpegtools (or Linux Video Studio) + + +Concerning buffer sizes, quality, output size etc. +-------------------------------------------------- + + +The zr36060 can do 1:2 JPEG compression. This is really the theoretical +maximum that the chipset can reach. The driver can, however, limit compression +to a maximum (size) of 1:4. The reason for this is that some cards (e.g. Buz) +can't handle 1:2 compression without stopping capture after only a few minutes. +With 1:4, it'll mostly work. If you have a Buz, use 'low_bitrate=1' to go into +1:4 max. compression mode. + +100% JPEG quality is thus 1:2 compression in practice. So for a full PAL frame +(size 720x576). The JPEG fields are stored in YUY2 format, so the size of the +fields are 720x288x16/2 bits/field (2 fields/frame) = 207360 bytes/field x 2 = +414720 bytes/frame (add some more bytes for headers and DHT (huffman)/DQT +(quantization) tables, and you'll get to something like 512kB per frame for +1:2 compression. For 1:4 compression, you'd have frames of half this size. + +Some additional explanation by Martin Samuelsson, which also explains the +importance of buffer sizes: +-- +> Hmm, I do not think it is really that way. With the current (downloaded +> at 18:00 Monday) driver I get that output sizes for 10 sec: +> -q 50 -b 128 : 24.283.332 Bytes +> -q 50 -b 256 : 48.442.368 +> -q 25 -b 128 : 24.655.992 +> -q 25 -b 256 : 25.859.820 + +I woke up, and can't go to sleep again. I'll kill some time explaining why +this doesn't look strange to me. + +Let's do some math using a width of 704 pixels. I'm not sure whether the Buz +actually use that number or not, but that's not too important right now. + +704x288 pixels, one field, is 202752 pixels. Divided by 64 pixels per block; +3168 blocks per field. Each pixel consist of two bytes; 128 bytes per block; +1024 bits per block. 100% in the new driver mean 1:2 compression; the maximum +output becomes 512 bits per block. Actually 510, but 512 is simpler to use +for calculations. + +Let's say that we specify d1q50. We thus want 256 bits per block; times 3168 +becomes 811008 bits; 101376 bytes per field. We're talking raw bits and bytes +here, so we don't need to do any fancy corrections for bits-per-pixel or such +things. 101376 bytes per field. + +d1 video contains two fields per frame. Those sum up to 202752 bytes per +frame, and one of those frames goes into each buffer. + +But wait a second! -b128 gives 128kB buffers! It's not possible to cram +202752 bytes of JPEG data into 128kB! + +This is what the driver notice and automatically compensate for in your +examples. Let's do some math using this information: + +128kB is 131072 bytes. In this buffer, we want to store two fields, which +leaves 65536 bytes for each field. Using 3168 blocks per field, we get +20.68686868... available bytes per block; 165 bits. We can't allow the +request for 256 bits per block when there's only 165 bits available! The -q50 +option is silently overridden, and the -b128 option takes precedence, leaving +us with the equivalence of -q32. + +This gives us a data rate of 165 bits per block, which, times 3168, sums up +to 65340 bytes per field, out of the allowed 65536. The current driver has +another level of rate limiting; it won't accept -q values that fill more than +6/8 of the specified buffers. (I'm not sure why. "Playing it safe" seem to be +a safe bet. Personally, I think I would have lowered requested-bits-per-block +by one, or something like that.) We can't use 165 bits per block, but have to +lower it again, to 6/8 of the available buffer space: We end up with 124 bits +per block, the equivalence of -q24. With 128kB buffers, you can't use greater +than -q24 at -d1. (And PAL, and 704 pixels width...) + +The third example is limited to -q24 through the same process. The second +example, using very similar calculations, is limited to -q48. The only +example that actually grab at the specified -q value is the last one, which +is clearly visible, looking at the file size. +-- + +Conclusion: the quality of the resulting movie depends on buffer size, quality, +whether or not you use 'low_bitrate=1' as insmod option for the zr36060.c +module to do 1:4 instead of 1:2 compression, etc. + +If you experience timeouts, lowering the quality/buffersize or using +'low_bitrate=1 as insmod option for zr36060.o might actually help, as is +proven by the Buz. + +It hangs/crashes/fails/whatevers! Help! +--------------------------------------- + +Make sure that the card has its own interrupts (see /proc/interrupts), check +the output of dmesg at high verbosity (load zr36067.o with debug=2, +load all other modules with debug=1). Check that your mainboard is favorable +(see question 2) and if not, test the card in another computer. Also see the +notes given in question 3 and try lowering quality/buffersize/capturesize +if recording fails after a period of time. + +If all this doesn't help, give a clear description of the problem including +detailed hardware information (memory+brand, mainboard+chipset+brand, which +MJPEG card, processor, other PCI cards that might be of interest), give the +system PnP information (/proc/interrupts, /proc/dma, /proc/devices), and give +the kernel version, driver version, glibc version, gcc version and any other +information that might possibly be of interest. Also provide the dmesg output +at high verbosity. See 'Contacting' on how to contact the developers. + +Maintainers/Contacting +---------------------- + +The driver is currently maintained by Laurent Pinchart and Ronald Bultje +(<laurent.pinchart@skynet.be> and <rbultje@ronald.bitfreak.net>). For bug +reports or questions, please contact the mailinglist instead of the developers +individually. For user questions (i.e. bug reports or how-to questions), send +an email to <mjpeg-users@lists.sf.net>, for developers (i.e. if you want to +help programming), send an email to <mjpeg-developer@lists.sf.net>. See +http://www.sf.net/projects/mjpeg/ for subscription information. + +For bug reports, be sure to include all the information as described in +the section 'It hangs/crashes/fails/whatevers! Help!'. Please make sure +you're using the latest version (http://mjpeg.sf.net/driver-zoran/). + +Previous maintainers/developers of this driver include Serguei Miridonov +<mirsev@cicese.mx>, Wolfgang Scherr <scherr@net4you.net>, Dave Perks +<dperks@ibm.net> and Rainer Johanni <Rainer@Johanni.de>. + +Driver's License +---------------- + + This driver is distributed under the terms of the General Public License. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + +See http://www.gnu.org/ for more information. diff --git a/Documentation/media/v4l-drivers/zr364xx.rst b/Documentation/media/v4l-drivers/zr364xx.rst new file mode 100644 index 000000000..3d193f01d --- /dev/null +++ b/Documentation/media/v4l-drivers/zr364xx.rst @@ -0,0 +1,108 @@ +Zoran 364xx based USB webcam module +=================================== + +site: http://royale.zerezo.com/zr364xx/ + +mail: royale@zerezo.com + +.. note:: + + This documentation is outdated + +Introduction +------------ + + +This brings support under Linux for the Aiptek PocketDV 3300 in webcam +mode. If you just want to get on your PC the pictures and movies on the +camera, you should use the usb-storage module instead. + +The driver works with several other cameras in webcam mode (see the list +below). + +Maybe this code can work for other JPEG/USB cams based on the Coach +chips from Zoran? + +Possible chipsets are : ZR36430 (ZR36430BGC) and +maybe ZR36431, ZR36440, ZR36442... + +You can try the experience changing the vendor/product ID values (look +at the source code). + +You can get these values by looking at /var/log/messages when you plug +your camera, or by typing : cat /sys/kernel/debug/usb/devices. + +If you manage to use your cam with this code, you can send me a mail +(royale@zerezo.com) with the name of your cam and a patch if needed. + +This is a beta release of the driver. Since version 0.70, this driver is +only compatible with V4L2 API and 2.6.x kernels. If you need V4L1 or +2.4x kernels support, please use an older version, but the code is not +maintained anymore. Good luck! + +Install +------- + +In order to use this driver, you must compile it with your kernel. + +Location: Device Drivers -> Multimedia devices -> Video For Linux -> Video Capture Adapters -> V4L USB devices + +Usage +----- + +modprobe zr364xx debug=X mode=Y + +- debug : set to 1 to enable verbose debug messages +- mode : 0 = 320x240, 1 = 160x120, 2 = 640x480 + +You can then use the camera with V4L2 compatible applications, for +example Ekiga. + +To capture a single image, try this: dd if=/dev/video0 of=test.jpg bs=1M +count=1 + +links +----- + +http://mxhaard.free.fr/ (support for many others cams including some Aiptek PocketDV) +http://www.harmwal.nl/pccam880/ (this project also supports cameras based on this chipset) + +Supported devices +----------------- + +====== ======= ============== ==================== +Vendor Product Distributor Model +====== ======= ============== ==================== +0x08ca 0x0109 Aiptek PocketDV 3300 +0x08ca 0x0109 Maxell Maxcam PRO DV3 +0x041e 0x4024 Creative PC-CAM 880 +0x0d64 0x0108 Aiptek Fidelity 3200 +0x0d64 0x0108 Praktica DCZ 1.3 S +0x0d64 0x0108 Genius Digital Camera (?) +0x0d64 0x0108 DXG Technology Fashion Cam +0x0546 0x3187 Polaroid iON 230 +0x0d64 0x3108 Praktica Exakta DC 2200 +0x0d64 0x3108 Genius G-Shot D211 +0x0595 0x4343 Concord Eye-Q Duo 1300 +0x0595 0x4343 Concord Eye-Q Duo 2000 +0x0595 0x4343 Fujifilm EX-10 +0x0595 0x4343 Ricoh RDC-6000 +0x0595 0x4343 Digitrex DSC 1300 +0x0595 0x4343 Firstline FDC 2000 +0x0bb0 0x500d Concord EyeQ Go Wireless +0x0feb 0x2004 CRS Electronic 3.3 Digital Camera +0x0feb 0x2004 Packard Bell DSC-300 +0x055f 0xb500 Mustek MDC 3000 +0x08ca 0x2062 Aiptek PocketDV 5700 +0x052b 0x1a18 Chiphead Megapix V12 +0x04c8 0x0729 Konica Revio 2 +0x04f2 0xa208 Creative PC-CAM 850 +0x0784 0x0040 Traveler Slimline X5 +0x06d6 0x0034 Trust Powerc@m 750 +0x0a17 0x0062 Pentax Optio 50L +0x06d6 0x003b Trust Powerc@m 970Z +0x0a17 0x004e Pentax Optio 50 +0x041e 0x405d Creative DiVi CAM 516 +0x08ca 0x2102 Aiptek DV T300 +0x06d6 0x003d Trust Powerc@m 910Z +====== ======= ============== ==================== |