diff options
Diffstat (limited to 'Documentation/process')
33 files changed, 10693 insertions, 0 deletions
diff --git a/Documentation/process/1.Intro.rst b/Documentation/process/1.Intro.rst new file mode 100644 index 000000000..e782ae2ee --- /dev/null +++ b/Documentation/process/1.Intro.rst @@ -0,0 +1,266 @@ +Introduction +============ + +Executive summary +----------------- + +The rest of this section covers the scope of the kernel development process +and the kinds of frustrations that developers and their employers can +encounter there. There are a great many reasons why kernel code should be +merged into the official ("mainline") kernel, including automatic +availability to users, community support in many forms, and the ability to +influence the direction of kernel development. Code contributed to the +Linux kernel must be made available under a GPL-compatible license. + +:ref:`development_process` introduces the development process, the kernel +release cycle, and the mechanics of the merge window. The various phases in +the patch development, review, and merging cycle are covered. There is some +discussion of tools and mailing lists. Developers wanting to get started +with kernel development are encouraged to track down and fix bugs as an +initial exercise. + +:ref:`development_early_stage` covers early-stage project planning, with an +emphasis on involving the development community as soon as possible. + +:ref:`development_coding` is about the coding process; several pitfalls which +have been encountered by other developers are discussed. Some requirements for +patches are covered, and there is an introduction to some of the tools +which can help to ensure that kernel patches are correct. + +:ref:`development_posting` talks about the process of posting patches for +review. To be taken seriously by the development community, patches must be +properly formatted and described, and they must be sent to the right place. +Following the advice in this section should help to ensure the best +possible reception for your work. + +:ref:`development_followthrough` covers what happens after posting patches; the +job is far from done at that point. Working with reviewers is a crucial part +of the development process; this section offers a number of tips on how to +avoid problems at this important stage. Developers are cautioned against +assuming that the job is done when a patch is merged into the mainline. + +:ref:`development_advancedtopics` introduces a couple of "advanced" topics: +managing patches with git and reviewing patches posted by others. + +:ref:`development_conclusion` concludes the document with pointers to sources +for more information on kernel development. + +What this document is about +--------------------------- + +The Linux kernel, at over 8 million lines of code and well over 1000 +contributors to each release, is one of the largest and most active free +software projects in existence. Since its humble beginning in 1991, this +kernel has evolved into a best-of-breed operating system component which +runs on pocket-sized digital music players, desktop PCs, the largest +supercomputers in existence, and all types of systems in between. It is a +robust, efficient, and scalable solution for almost any situation. + +With the growth of Linux has come an increase in the number of developers +(and companies) wishing to participate in its development. Hardware +vendors want to ensure that Linux supports their products well, making +those products attractive to Linux users. Embedded systems vendors, who +use Linux as a component in an integrated product, want Linux to be as +capable and well-suited to the task at hand as possible. Distributors and +other software vendors who base their products on Linux have a clear +interest in the capabilities, performance, and reliability of the Linux +kernel. And end users, too, will often wish to change Linux to make it +better suit their needs. + +One of the most compelling features of Linux is that it is accessible to +these developers; anybody with the requisite skills can improve Linux and +influence the direction of its development. Proprietary products cannot +offer this kind of openness, which is a characteristic of the free software +process. But, if anything, the kernel is even more open than most other +free software projects. A typical three-month kernel development cycle can +involve over 1000 developers working for more than 100 different companies +(or for no company at all). + +Working with the kernel development community is not especially hard. But, +that notwithstanding, many potential contributors have experienced +difficulties when trying to do kernel work. The kernel community has +evolved its own distinct ways of operating which allow it to function +smoothly (and produce a high-quality product) in an environment where +thousands of lines of code are being changed every day. So it is not +surprising that Linux kernel development process differs greatly from +proprietary development methods. + +The kernel's development process may come across as strange and +intimidating to new developers, but there are good reasons and solid +experience behind it. A developer who does not understand the kernel +community's ways (or, worse, who tries to flout or circumvent them) will +have a frustrating experience in store. The development community, while +being helpful to those who are trying to learn, has little time for those +who will not listen or who do not care about the development process. + +It is hoped that those who read this document will be able to avoid that +frustrating experience. There is a lot of material here, but the effort +involved in reading it will be repaid in short order. The development +community is always in need of developers who will help to make the kernel +better; the following text should help you - or those who work for you - +join our community. + +Credits +------- + +This document was written by Jonathan Corbet, corbet@lwn.net. It has been +improved by comments from Johannes Berg, James Berry, Alex Chiang, Roland +Dreier, Randy Dunlap, Jake Edge, Jiri Kosina, Matt Mackall, Arthur Marsh, +Amanda McPherson, Andrew Morton, Andrew Price, Tsugikazu Shibata, and +Jochen Voß. + +This work was supported by the Linux Foundation; thanks especially to +Amanda McPherson, who saw the value of this effort and made it all happen. + +The importance of getting code into the mainline +------------------------------------------------ + +Some companies and developers occasionally wonder why they should bother +learning how to work with the kernel community and get their code into the +mainline kernel (the "mainline" being the kernel maintained by Linus +Torvalds and used as a base by Linux distributors). In the short term, +contributing code can look like an avoidable expense; it seems easier to +just keep the code separate and support users directly. The truth of the +matter is that keeping code separate ("out of tree") is a false economy. + +As a way of illustrating the costs of out-of-tree code, here are a few +relevant aspects of the kernel development process; most of these will be +discussed in greater detail later in this document. Consider: + +- Code which has been merged into the mainline kernel is available to all + Linux users. It will automatically be present on all distributions which + enable it. There is no need for driver disks, downloads, or the hassles + of supporting multiple versions of multiple distributions; it all just + works, for the developer and for the user. Incorporation into the + mainline solves a large number of distribution and support problems. + +- While kernel developers strive to maintain a stable interface to user + space, the internal kernel API is in constant flux. The lack of a stable + internal interface is a deliberate design decision; it allows fundamental + improvements to be made at any time and results in higher-quality code. + But one result of that policy is that any out-of-tree code requires + constant upkeep if it is to work with new kernels. Maintaining + out-of-tree code requires significant amounts of work just to keep that + code working. + + Code which is in the mainline, instead, does not require this work as the + result of a simple rule requiring any developer who makes an API change + to also fix any code that breaks as the result of that change. So code + which has been merged into the mainline has significantly lower + maintenance costs. + +- Beyond that, code which is in the kernel will often be improved by other + developers. Surprising results can come from empowering your user + community and customers to improve your product. + +- Kernel code is subjected to review, both before and after merging into + the mainline. No matter how strong the original developer's skills are, + this review process invariably finds ways in which the code can be + improved. Often review finds severe bugs and security problems. This is + especially true for code which has been developed in a closed + environment; such code benefits strongly from review by outside + developers. Out-of-tree code is lower-quality code. + +- Participation in the development process is your way to influence the + direction of kernel development. Users who complain from the sidelines + are heard, but active developers have a stronger voice - and the ability + to implement changes which make the kernel work better for their needs. + +- When code is maintained separately, the possibility that a third party + will contribute a different implementation of a similar feature always + exists. Should that happen, getting your code merged will become much + harder - to the point of impossibility. Then you will be faced with the + unpleasant alternatives of either (1) maintaining a nonstandard feature + out of tree indefinitely, or (2) abandoning your code and migrating your + users over to the in-tree version. + +- Contribution of code is the fundamental action which makes the whole + process work. By contributing your code you can add new functionality to + the kernel and provide capabilities and examples which are of use to + other kernel developers. If you have developed code for Linux (or are + thinking about doing so), you clearly have an interest in the continued + success of this platform; contributing code is one of the best ways to + help ensure that success. + +All of the reasoning above applies to any out-of-tree kernel code, +including code which is distributed in proprietary, binary-only form. +There are, however, additional factors which should be taken into account +before considering any sort of binary-only kernel code distribution. These +include: + +- The legal issues around the distribution of proprietary kernel modules + are cloudy at best; quite a few kernel copyright holders believe that + most binary-only modules are derived products of the kernel and that, as + a result, their distribution is a violation of the GNU General Public + license (about which more will be said below). Your author is not a + lawyer, and nothing in this document can possibly be considered to be + legal advice. The true legal status of closed-source modules can only be + determined by the courts. But the uncertainty which haunts those modules + is there regardless. + +- Binary modules greatly increase the difficulty of debugging kernel + problems, to the point that most kernel developers will not even try. So + the distribution of binary-only modules will make it harder for your + users to get support from the community. + +- Support is also harder for distributors of binary-only modules, who must + provide a version of the module for every distribution and every kernel + version they wish to support. Dozens of builds of a single module can + be required to provide reasonably comprehensive coverage, and your users + will have to upgrade your module separately every time they upgrade their + kernel. + +- Everything that was said above about code review applies doubly to + closed-source code. Since this code is not available at all, it cannot + have been reviewed by the community and will, beyond doubt, have serious + problems. + +Makers of embedded systems, in particular, may be tempted to disregard much +of what has been said in this section in the belief that they are shipping +a self-contained product which uses a frozen kernel version and requires no +more development after its release. This argument misses the value of +widespread code review and the value of allowing your users to add +capabilities to your product. But these products, too, have a limited +commercial life, after which a new version must be released. At that +point, vendors whose code is in the mainline and well maintained will be +much better positioned to get the new product ready for market quickly. + +Licensing +--------- + +Code is contributed to the Linux kernel under a number of licenses, but all +code must be compatible with version 2 of the GNU General Public License +(GPLv2), which is the license covering the kernel distribution as a whole. +In practice, that means that all code contributions are covered either by +GPLv2 (with, optionally, language allowing distribution under later +versions of the GPL) or the three-clause BSD license. Any contributions +which are not covered by a compatible license will not be accepted into the +kernel. + +Copyright assignments are not required (or requested) for code contributed +to the kernel. All code merged into the mainline kernel retains its +original ownership; as a result, the kernel now has thousands of owners. + +One implication of this ownership structure is that any attempt to change +the licensing of the kernel is doomed to almost certain failure. There are +few practical scenarios where the agreement of all copyright holders could +be obtained (or their code removed from the kernel). So, in particular, +there is no prospect of a migration to version 3 of the GPL in the +foreseeable future. + +It is imperative that all code contributed to the kernel be legitimately +free software. For that reason, code from anonymous (or pseudonymous) +contributors will not be accepted. All contributors are required to "sign +off" on their code, stating that the code can be distributed with the +kernel under the GPL. Code which has not been licensed as free software by +its owner, or which risks creating copyright-related problems for the +kernel (such as code which derives from reverse-engineering efforts lacking +proper safeguards) cannot be contributed. + +Questions about copyright-related issues are common on Linux development +mailing lists. Such questions will normally receive no shortage of +answers, but one should bear in mind that the people answering those +questions are not lawyers and cannot provide legal advice. If you have +legal questions relating to Linux source code, there is no substitute for +talking with a lawyer who understands this field. Relying on answers +obtained on technical mailing lists is a risky affair. diff --git a/Documentation/process/2.Process.rst b/Documentation/process/2.Process.rst new file mode 100644 index 000000000..51d0349c7 --- /dev/null +++ b/Documentation/process/2.Process.rst @@ -0,0 +1,501 @@ +.. _development_process: + +How the development process works +================================= + +Linux kernel development in the early 1990's was a pretty loose affair, +with relatively small numbers of users and developers involved. With a +user base in the millions and with some 2,000 developers involved over the +course of one year, the kernel has since had to evolve a number of +processes to keep development happening smoothly. A solid understanding of +how the process works is required in order to be an effective part of it. + +The big picture +--------------- + +The kernel developers use a loosely time-based release process, with a new +major kernel release happening every two or three months. The recent +release history looks like this: + + ====== ================= + 4.11 April 30, 2017 + 4.12 July 2, 2017 + 4.13 September 3, 2017 + 4.14 November 12, 2017 + 4.15 January 28, 2018 + 4.16 April 1, 2018 + ====== ================= + +Every 4.x release is a major kernel release with new features, internal +API changes, and more. A typical 4.x release contain about 13,000 +changesets with changes to several hundred thousand lines of code. 4.x is +thus the leading edge of Linux kernel development; the kernel uses a +rolling development model which is continually integrating major changes. + +A relatively straightforward discipline is followed with regard to the +merging of patches for each release. At the beginning of each development +cycle, the "merge window" is said to be open. At that time, code which is +deemed to be sufficiently stable (and which is accepted by the development +community) is merged into the mainline kernel. The bulk of changes for a +new development cycle (and all of the major changes) will be merged during +this time, at a rate approaching 1,000 changes ("patches," or "changesets") +per day. + +(As an aside, it is worth noting that the changes integrated during the +merge window do not come out of thin air; they have been collected, tested, +and staged ahead of time. How that process works will be described in +detail later on). + +The merge window lasts for approximately two weeks. At the end of this +time, Linus Torvalds will declare that the window is closed and release the +first of the "rc" kernels. For the kernel which is destined to be 2.6.40, +for example, the release which happens at the end of the merge window will +be called 2.6.40-rc1. The -rc1 release is the signal that the time to +merge new features has passed, and that the time to stabilize the next +kernel has begun. + +Over the next six to ten weeks, only patches which fix problems should be +submitted to the mainline. On occasion a more significant change will be +allowed, but such occasions are rare; developers who try to merge new +features outside of the merge window tend to get an unfriendly reception. +As a general rule, if you miss the merge window for a given feature, the +best thing to do is to wait for the next development cycle. (An occasional +exception is made for drivers for previously-unsupported hardware; if they +touch no in-tree code, they cannot cause regressions and should be safe to +add at any time). + +As fixes make their way into the mainline, the patch rate will slow over +time. Linus releases new -rc kernels about once a week; a normal series +will get up to somewhere between -rc6 and -rc9 before the kernel is +considered to be sufficiently stable and the final 2.6.x release is made. +At that point the whole process starts over again. + +As an example, here is how the 4.16 development cycle went (all dates in +2018): + + ============== =============================== + January 28 4.15 stable release + February 11 4.16-rc1, merge window closes + February 18 4.16-rc2 + February 25 4.16-rc3 + March 4 4.16-rc4 + March 11 4.16-rc5 + March 18 4.16-rc6 + March 25 4.16-rc7 + April 1 4.17 stable release + ============== =============================== + +How do the developers decide when to close the development cycle and create +the stable release? The most significant metric used is the list of +regressions from previous releases. No bugs are welcome, but those which +break systems which worked in the past are considered to be especially +serious. For this reason, patches which cause regressions are looked upon +unfavorably and are quite likely to be reverted during the stabilization +period. + +The developers' goal is to fix all known regressions before the stable +release is made. In the real world, this kind of perfection is hard to +achieve; there are just too many variables in a project of this size. +There comes a point where delaying the final release just makes the problem +worse; the pile of changes waiting for the next merge window will grow +larger, creating even more regressions the next time around. So most 4.x +kernels go out with a handful of known regressions though, hopefully, none +of them are serious. + +Once a stable release is made, its ongoing maintenance is passed off to the +"stable team," currently consisting of Greg Kroah-Hartman. The stable team +will release occasional updates to the stable release using the 4.x.y +numbering scheme. To be considered for an update release, a patch must (1) +fix a significant bug, and (2) already be merged into the mainline for the +next development kernel. Kernels will typically receive stable updates for +a little more than one development cycle past their initial release. So, +for example, the 4.13 kernel's history looked like: + + ============== =============================== + September 3 4.13 stable release + September 13 4.13.1 + September 20 4.13.2 + September 27 4.13.3 + October 5 4.13.4 + October 12 4.13.5 + ... ... + November 24 4.13.16 + ============== =============================== + +4.13.16 was the final stable update of the 4.13 release. + +Some kernels are designated "long term" kernels; they will receive support +for a longer period. As of this writing, the current long term kernels +and their maintainers are: + + ====== ====================== ============================== + 3.16 Ben Hutchings (very long-term stable kernel) + 4.1 Sasha Levin + 4.4 Greg Kroah-Hartman (very long-term stable kernel) + 4.9 Greg Kroah-Hartman + 4.14 Greg Kroah-Hartman + ====== ====================== ============================== + +The selection of a kernel for long-term support is purely a matter of a +maintainer having the need and the time to maintain that release. There +are no known plans for long-term support for any specific upcoming +release. + + +The lifecycle of a patch +------------------------ + +Patches do not go directly from the developer's keyboard into the mainline +kernel. There is, instead, a somewhat involved (if somewhat informal) +process designed to ensure that each patch is reviewed for quality and that +each patch implements a change which is desirable to have in the mainline. +This process can happen quickly for minor fixes, or, in the case of large +and controversial changes, go on for years. Much developer frustration +comes from a lack of understanding of this process or from attempts to +circumvent it. + +In the hopes of reducing that frustration, this document will describe how +a patch gets into the kernel. What follows below is an introduction which +describes the process in a somewhat idealized way. A much more detailed +treatment will come in later sections. + +The stages that a patch goes through are, generally: + + - Design. This is where the real requirements for the patch - and the way + those requirements will be met - are laid out. Design work is often + done without involving the community, but it is better to do this work + in the open if at all possible; it can save a lot of time redesigning + things later. + + - Early review. Patches are posted to the relevant mailing list, and + developers on that list reply with any comments they may have. This + process should turn up any major problems with a patch if all goes + well. + + - Wider review. When the patch is getting close to ready for mainline + inclusion, it should be accepted by a relevant subsystem maintainer - + though this acceptance is not a guarantee that the patch will make it + all the way to the mainline. The patch will show up in the maintainer's + subsystem tree and into the -next trees (described below). When the + process works, this step leads to more extensive review of the patch and + the discovery of any problems resulting from the integration of this + patch with work being done by others. + +- Please note that most maintainers also have day jobs, so merging + your patch may not be their highest priority. If your patch is + getting feedback about changes that are needed, you should either + make those changes or justify why they should not be made. If your + patch has no review complaints but is not being merged by its + appropriate subsystem or driver maintainer, you should be persistent + in updating the patch to the current kernel so that it applies cleanly + and keep sending it for review and merging. + + - Merging into the mainline. Eventually, a successful patch will be + merged into the mainline repository managed by Linus Torvalds. More + comments and/or problems may surface at this time; it is important that + the developer be responsive to these and fix any issues which arise. + + - Stable release. The number of users potentially affected by the patch + is now large, so, once again, new problems may arise. + + - Long-term maintenance. While it is certainly possible for a developer + to forget about code after merging it, that sort of behavior tends to + leave a poor impression in the development community. Merging code + eliminates some of the maintenance burden, in that others will fix + problems caused by API changes. But the original developer should + continue to take responsibility for the code if it is to remain useful + in the longer term. + +One of the largest mistakes made by kernel developers (or their employers) +is to try to cut the process down to a single "merging into the mainline" +step. This approach invariably leads to frustration for everybody +involved. + +How patches get into the Kernel +------------------------------- + +There is exactly one person who can merge patches into the mainline kernel +repository: Linus Torvalds. But, of the over 9,500 patches which went +into the 2.6.38 kernel, only 112 (around 1.3%) were directly chosen by Linus +himself. The kernel project has long since grown to a size where no single +developer could possibly inspect and select every patch unassisted. The +way the kernel developers have addressed this growth is through the use of +a lieutenant system built around a chain of trust. + +The kernel code base is logically broken down into a set of subsystems: +networking, specific architecture support, memory management, video +devices, etc. Most subsystems have a designated maintainer, a developer +who has overall responsibility for the code within that subsystem. These +subsystem maintainers are the gatekeepers (in a loose way) for the portion +of the kernel they manage; they are the ones who will (usually) accept a +patch for inclusion into the mainline kernel. + +Subsystem maintainers each manage their own version of the kernel source +tree, usually (but certainly not always) using the git source management +tool. Tools like git (and related tools like quilt or mercurial) allow +maintainers to track a list of patches, including authorship information +and other metadata. At any given time, the maintainer can identify which +patches in his or her repository are not found in the mainline. + +When the merge window opens, top-level maintainers will ask Linus to "pull" +the patches they have selected for merging from their repositories. If +Linus agrees, the stream of patches will flow up into his repository, +becoming part of the mainline kernel. The amount of attention that Linus +pays to specific patches received in a pull operation varies. It is clear +that, sometimes, he looks quite closely. But, as a general rule, Linus +trusts the subsystem maintainers to not send bad patches upstream. + +Subsystem maintainers, in turn, can pull patches from other maintainers. +For example, the networking tree is built from patches which accumulated +first in trees dedicated to network device drivers, wireless networking, +etc. This chain of repositories can be arbitrarily long, though it rarely +exceeds two or three links. Since each maintainer in the chain trusts +those managing lower-level trees, this process is known as the "chain of +trust." + +Clearly, in a system like this, getting patches into the kernel depends on +finding the right maintainer. Sending patches directly to Linus is not +normally the right way to go. + + +Next trees +---------- + +The chain of subsystem trees guides the flow of patches into the kernel, +but it also raises an interesting question: what if somebody wants to look +at all of the patches which are being prepared for the next merge window? +Developers will be interested in what other changes are pending to see +whether there are any conflicts to worry about; a patch which changes a +core kernel function prototype, for example, will conflict with any other +patches which use the older form of that function. Reviewers and testers +want access to the changes in their integrated form before all of those +changes land in the mainline kernel. One could pull changes from all of +the interesting subsystem trees, but that would be a big and error-prone +job. + +The answer comes in the form of -next trees, where subsystem trees are +collected for testing and review. The older of these trees, maintained by +Andrew Morton, is called "-mm" (for memory management, which is how it got +started). The -mm tree integrates patches from a long list of subsystem +trees; it also has some patches aimed at helping with debugging. + +Beyond that, -mm contains a significant collection of patches which have +been selected by Andrew directly. These patches may have been posted on a +mailing list, or they may apply to a part of the kernel for which there is +no designated subsystem tree. As a result, -mm operates as a sort of +subsystem tree of last resort; if there is no other obvious path for a +patch into the mainline, it is likely to end up in -mm. Miscellaneous +patches which accumulate in -mm will eventually either be forwarded on to +an appropriate subsystem tree or be sent directly to Linus. In a typical +development cycle, approximately 5-10% of the patches going into the +mainline get there via -mm. + +The current -mm patch is available in the "mmotm" (-mm of the moment) +directory at: + + http://www.ozlabs.org/~akpm/mmotm/ + +Use of the MMOTM tree is likely to be a frustrating experience, though; +there is a definite chance that it will not even compile. + +The primary tree for next-cycle patch merging is linux-next, maintained by +Stephen Rothwell. The linux-next tree is, by design, a snapshot of what +the mainline is expected to look like after the next merge window closes. +Linux-next trees are announced on the linux-kernel and linux-next mailing +lists when they are assembled; they can be downloaded from: + + http://www.kernel.org/pub/linux/kernel/next/ + +Linux-next has become an integral part of the kernel development process; +all patches merged during a given merge window should really have found +their way into linux-next some time before the merge window opens. + + +Staging trees +------------- + +The kernel source tree contains the drivers/staging/ directory, where +many sub-directories for drivers or filesystems that are on their way to +being added to the kernel tree live. They remain in drivers/staging while +they still need more work; once complete, they can be moved into the +kernel proper. This is a way to keep track of drivers that aren't +up to Linux kernel coding or quality standards, but people may want to use +them and track development. + +Greg Kroah-Hartman currently maintains the staging tree. Drivers that +still need work are sent to him, with each driver having its own +subdirectory in drivers/staging/. Along with the driver source files, a +TODO file should be present in the directory as well. The TODO file lists +the pending work that the driver needs for acceptance into the kernel +proper, as well as a list of people that should be Cc'd for any patches to +the driver. Current rules require that drivers contributed to staging +must, at a minimum, compile properly. + +Staging can be a relatively easy way to get new drivers into the mainline +where, with luck, they will come to the attention of other developers and +improve quickly. Entry into staging is not the end of the story, though; +code in staging which is not seeing regular progress will eventually be +removed. Distributors also tend to be relatively reluctant to enable +staging drivers. So staging is, at best, a stop on the way toward becoming +a proper mainline driver. + + +Tools +----- + +As can be seen from the above text, the kernel development process depends +heavily on the ability to herd collections of patches in various +directions. The whole thing would not work anywhere near as well as it +does without suitably powerful tools. Tutorials on how to use these tools +are well beyond the scope of this document, but there is space for a few +pointers. + +By far the dominant source code management system used by the kernel +community is git. Git is one of a number of distributed version control +systems being developed in the free software community. It is well tuned +for kernel development, in that it performs quite well when dealing with +large repositories and large numbers of patches. It also has a reputation +for being difficult to learn and use, though it has gotten better over +time. Some sort of familiarity with git is almost a requirement for kernel +developers; even if they do not use it for their own work, they'll need git +to keep up with what other developers (and the mainline) are doing. + +Git is now packaged by almost all Linux distributions. There is a home +page at: + + http://git-scm.com/ + +That page has pointers to documentation and tutorials. + +Among the kernel developers who do not use git, the most popular choice is +almost certainly Mercurial: + + http://www.selenic.com/mercurial/ + +Mercurial shares many features with git, but it provides an interface which +many find easier to use. + +The other tool worth knowing about is Quilt: + + http://savannah.nongnu.org/projects/quilt/ + +Quilt is a patch management system, rather than a source code management +system. It does not track history over time; it is, instead, oriented +toward tracking a specific set of changes against an evolving code base. +Some major subsystem maintainers use quilt to manage patches intended to go +upstream. For the management of certain kinds of trees (-mm, for example), +quilt is the best tool for the job. + + +Mailing lists +------------- + +A great deal of Linux kernel development work is done by way of mailing +lists. It is hard to be a fully-functioning member of the community +without joining at least one list somewhere. But Linux mailing lists also +represent a potential hazard to developers, who risk getting buried under a +load of electronic mail, running afoul of the conventions used on the Linux +lists, or both. + +Most kernel mailing lists are run on vger.kernel.org; the master list can +be found at: + + http://vger.kernel.org/vger-lists.html + +There are lists hosted elsewhere, though; a number of them are at +lists.redhat.com. + +The core mailing list for kernel development is, of course, linux-kernel. +This list is an intimidating place to be; volume can reach 500 messages per +day, the amount of noise is high, the conversation can be severely +technical, and participants are not always concerned with showing a high +degree of politeness. But there is no other place where the kernel +development community comes together as a whole; developers who avoid this +list will miss important information. + +There are a few hints which can help with linux-kernel survival: + +- Have the list delivered to a separate folder, rather than your main + mailbox. One must be able to ignore the stream for sustained periods of + time. + +- Do not try to follow every conversation - nobody else does. It is + important to filter on both the topic of interest (though note that + long-running conversations can drift away from the original subject + without changing the email subject line) and the people who are + participating. + +- Do not feed the trolls. If somebody is trying to stir up an angry + response, ignore them. + +- When responding to linux-kernel email (or that on other lists) preserve + the Cc: header for all involved. In the absence of a strong reason (such + as an explicit request), you should never remove recipients. Always make + sure that the person you are responding to is in the Cc: list. This + convention also makes it unnecessary to explicitly ask to be copied on + replies to your postings. + +- Search the list archives (and the net as a whole) before asking + questions. Some developers can get impatient with people who clearly + have not done their homework. + +- Avoid top-posting (the practice of putting your answer above the quoted + text you are responding to). It makes your response harder to read and + makes a poor impression. + +- Ask on the correct mailing list. Linux-kernel may be the general meeting + point, but it is not the best place to find developers from all + subsystems. + +The last point - finding the correct mailing list - is a common place for +beginning developers to go wrong. Somebody who asks a networking-related +question on linux-kernel will almost certainly receive a polite suggestion +to ask on the netdev list instead, as that is the list frequented by most +networking developers. Other lists exist for the SCSI, video4linux, IDE, +filesystem, etc. subsystems. The best place to look for mailing lists is +in the MAINTAINERS file packaged with the kernel source. + + +Getting started with Kernel development +--------------------------------------- + +Questions about how to get started with the kernel development process are +common - from both individuals and companies. Equally common are missteps +which make the beginning of the relationship harder than it has to be. + +Companies often look to hire well-known developers to get a development +group started. This can, in fact, be an effective technique. But it also +tends to be expensive and does not do much to grow the pool of experienced +kernel developers. It is possible to bring in-house developers up to speed +on Linux kernel development, given the investment of a bit of time. Taking +this time can endow an employer with a group of developers who understand +the kernel and the company both, and who can help to train others as well. +Over the medium term, this is often the more profitable approach. + +Individual developers are often, understandably, at a loss for a place to +start. Beginning with a large project can be intimidating; one often wants +to test the waters with something smaller first. This is the point where +some developers jump into the creation of patches fixing spelling errors or +minor coding style issues. Unfortunately, such patches create a level of +noise which is distracting for the development community as a whole, so, +increasingly, they are looked down upon. New developers wishing to +introduce themselves to the community will not get the sort of reception +they wish for by these means. + +Andrew Morton gives this advice for aspiring kernel developers + +:: + + The #1 project for all kernel beginners should surely be "make sure + that the kernel runs perfectly at all times on all machines which + you can lay your hands on". Usually the way to do this is to work + with others on getting things fixed up (this can require + persistence!) but that's fine - it's a part of kernel development. + +(http://lwn.net/Articles/283982/). + +In the absence of obvious problems to fix, developers are advised to look +at the current lists of regressions and open bugs in general. There is +never any shortage of issues in need of fixing; by addressing these issues, +developers will gain experience with the process while, at the same time, +building respect with the rest of the development community. diff --git a/Documentation/process/3.Early-stage.rst b/Documentation/process/3.Early-stage.rst new file mode 100644 index 000000000..be0071607 --- /dev/null +++ b/Documentation/process/3.Early-stage.rst @@ -0,0 +1,222 @@ +.. _development_early_stage: + +Early-stage planning +==================== + +When contemplating a Linux kernel development project, it can be tempting +to jump right in and start coding. As with any significant project, +though, much of the groundwork for success is best laid before the first +line of code is written. Some time spent in early planning and +communication can save far more time later on. + + +Specifying the problem +---------------------- + +Like any engineering project, a successful kernel enhancement starts with a +clear description of the problem to be solved. In some cases, this step is +easy: when a driver is needed for a specific piece of hardware, for +example. In others, though, it is tempting to confuse the real problem +with the proposed solution, and that can lead to difficulties. + +Consider an example: some years ago, developers working with Linux audio +sought a way to run applications without dropouts or other artifacts caused +by excessive latency in the system. The solution they arrived at was a +kernel module intended to hook into the Linux Security Module (LSM) +framework; this module could be configured to give specific applications +access to the realtime scheduler. This module was implemented and sent to +the linux-kernel mailing list, where it immediately ran into problems. + +To the audio developers, this security module was sufficient to solve their +immediate problem. To the wider kernel community, though, it was seen as a +misuse of the LSM framework (which is not intended to confer privileges +onto processes which they would not otherwise have) and a risk to system +stability. Their preferred solutions involved realtime scheduling access +via the rlimit mechanism for the short term, and ongoing latency reduction +work in the long term. + +The audio community, however, could not see past the particular solution +they had implemented; they were unwilling to accept alternatives. The +resulting disagreement left those developers feeling disillusioned with the +entire kernel development process; one of them went back to an audio list +and posted this: + + There are a number of very good Linux kernel developers, but they + tend to get outshouted by a large crowd of arrogant fools. Trying + to communicate user requirements to these people is a waste of + time. They are much too "intelligent" to listen to lesser mortals. + +(http://lwn.net/Articles/131776/). + +The reality of the situation was different; the kernel developers were far +more concerned about system stability, long-term maintenance, and finding +the right solution to the problem than they were with a specific module. +The moral of the story is to focus on the problem - not a specific solution +- and to discuss it with the development community before investing in the +creation of a body of code. + +So, when contemplating a kernel development project, one should obtain +answers to a short set of questions: + + - What, exactly, is the problem which needs to be solved? + + - Who are the users affected by this problem? Which use cases should the + solution address? + + - How does the kernel fall short in addressing that problem now? + +Only then does it make sense to start considering possible solutions. + + +Early discussion +---------------- + +When planning a kernel development project, it makes great sense to hold +discussions with the community before launching into implementation. Early +communication can save time and trouble in a number of ways: + + - It may well be that the problem is addressed by the kernel in ways which + you have not understood. The Linux kernel is large and has a number of + features and capabilities which are not immediately obvious. Not all + kernel capabilities are documented as well as one might like, and it is + easy to miss things. Your author has seen the posting of a complete + driver which duplicated an existing driver that the new author had been + unaware of. Code which reinvents existing wheels is not only wasteful; + it will also not be accepted into the mainline kernel. + + - There may be elements of the proposed solution which will not be + acceptable for mainline merging. It is better to find out about + problems like this before writing the code. + + - It's entirely possible that other developers have thought about the + problem; they may have ideas for a better solution, and may be willing + to help in the creation of that solution. + +Years of experience with the kernel development community have taught a +clear lesson: kernel code which is designed and developed behind closed +doors invariably has problems which are only revealed when the code is +released into the community. Sometimes these problems are severe, +requiring months or years of effort before the code can be brought up to +the kernel community's standards. Some examples include: + + - The Devicescape network stack was designed and implemented for + single-processor systems. It could not be merged into the mainline + until it was made suitable for multiprocessor systems. Retrofitting + locking and such into code is a difficult task; as a result, the merging + of this code (now called mac80211) was delayed for over a year. + + - The Reiser4 filesystem included a number of capabilities which, in the + core kernel developers' opinion, should have been implemented in the + virtual filesystem layer instead. It also included features which could + not easily be implemented without exposing the system to user-caused + deadlocks. The late revelation of these problems - and refusal to + address some of them - has caused Reiser4 to stay out of the mainline + kernel. + + - The AppArmor security module made use of internal virtual filesystem + data structures in ways which were considered to be unsafe and + unreliable. This concern (among others) kept AppArmor out of the + mainline for years. + +In each of these cases, a great deal of pain and extra work could have been +avoided with some early discussion with the kernel developers. + + +Who do you talk to? +------------------- + +When developers decide to take their plans public, the next question will +be: where do we start? The answer is to find the right mailing list(s) and +the right maintainer. For mailing lists, the best approach is to look in +the MAINTAINERS file for a relevant place to post. If there is a suitable +subsystem list, posting there is often preferable to posting on +linux-kernel; you are more likely to reach developers with expertise in the +relevant subsystem and the environment may be more supportive. + +Finding maintainers can be a bit harder. Again, the MAINTAINERS file is +the place to start. That file tends to not always be up to date, though, +and not all subsystems are represented there. The person listed in the +MAINTAINERS file may, in fact, not be the person who is actually acting in +that role currently. So, when there is doubt about who to contact, a +useful trick is to use git (and "git log" in particular) to see who is +currently active within the subsystem of interest. Look at who is writing +patches, and who, if anybody, is attaching Signed-off-by lines to those +patches. Those are the people who will be best placed to help with a new +development project. + +The task of finding the right maintainer is sometimes challenging enough +that the kernel developers have added a script to ease the process: + +:: + + .../scripts/get_maintainer.pl + +This script will return the current maintainer(s) for a given file or +directory when given the "-f" option. If passed a patch on the +command line, it will list the maintainers who should probably receive +copies of the patch. There are a number of options regulating how hard +get_maintainer.pl will search for maintainers; please be careful about +using the more aggressive options as you may end up including developers +who have no real interest in the code you are modifying. + +If all else fails, talking to Andrew Morton can be an effective way to +track down a maintainer for a specific piece of code. + + +When to post? +------------- + +If possible, posting your plans during the early stages can only be +helpful. Describe the problem being solved and any plans that have been +made on how the implementation will be done. Any information you can +provide can help the development community provide useful input on the +project. + +One discouraging thing which can happen at this stage is not a hostile +reaction, but, instead, little or no reaction at all. The sad truth of the +matter is (1) kernel developers tend to be busy, (2) there is no shortage +of people with grand plans and little code (or even prospect of code) to +back them up, and (3) nobody is obligated to review or comment on ideas +posted by others. Beyond that, high-level designs often hide problems +which are only revealed when somebody actually tries to implement those +designs; for that reason, kernel developers would rather see the code. + +If a request-for-comments posting yields little in the way of comments, do +not assume that it means there is no interest in the project. +Unfortunately, you also cannot assume that there are no problems with your +idea. The best thing to do in this situation is to proceed, keeping the +community informed as you go. + + +Getting official buy-in +----------------------- + +If your work is being done in a corporate environment - as most Linux +kernel work is - you must, obviously, have permission from suitably +empowered managers before you can post your company's plans or code to a +public mailing list. The posting of code which has not been cleared for +release under a GPL-compatible license can be especially problematic; the +sooner that a company's management and legal staff can agree on the posting +of a kernel development project, the better off everybody involved will be. + +Some readers may be thinking at this point that their kernel work is +intended to support a product which does not yet have an officially +acknowledged existence. Revealing their employer's plans on a public +mailing list may not be a viable option. In cases like this, it is worth +considering whether the secrecy is really necessary; there is often no real +need to keep development plans behind closed doors. + +That said, there are also cases where a company legitimately cannot +disclose its plans early in the development process. Companies with +experienced kernel developers may choose to proceed in an open-loop manner +on the assumption that they will be able to avoid serious integration +problems later. For companies without that sort of in-house expertise, the +best option is often to hire an outside developer to review the plans under +a non-disclosure agreement. The Linux Foundation operates an NDA program +designed to help with this sort of situation; more information can be found +at: + + http://www.linuxfoundation.org/en/NDA_program + +This kind of review is often enough to avoid serious problems later on +without requiring public disclosure of the project. diff --git a/Documentation/process/4.Coding.rst b/Documentation/process/4.Coding.rst new file mode 100644 index 000000000..eb4b185d1 --- /dev/null +++ b/Documentation/process/4.Coding.rst @@ -0,0 +1,422 @@ +.. _development_coding: + +Getting the code right +====================== + +While there is much to be said for a solid and community-oriented design +process, the proof of any kernel development project is in the resulting +code. It is the code which will be examined by other developers and merged +(or not) into the mainline tree. So it is the quality of this code which +will determine the ultimate success of the project. + +This section will examine the coding process. We'll start with a look at a +number of ways in which kernel developers can go wrong. Then the focus +will shift toward doing things right and the tools which can help in that +quest. + + +Pitfalls +--------- + +Coding style +************ + +The kernel has long had a standard coding style, described in +:ref:`Documentation/process/coding-style.rst <codingstyle>`. For much of +that time, the policies described in that file were taken as being, at most, +advisory. As a result, there is a substantial amount of code in the kernel +which does not meet the coding style guidelines. The presence of that code +leads to two independent hazards for kernel developers. + +The first of these is to believe that the kernel coding standards do not +matter and are not enforced. The truth of the matter is that adding new +code to the kernel is very difficult if that code is not coded according to +the standard; many developers will request that the code be reformatted +before they will even review it. A code base as large as the kernel +requires some uniformity of code to make it possible for developers to +quickly understand any part of it. So there is no longer room for +strangely-formatted code. + +Occasionally, the kernel's coding style will run into conflict with an +employer's mandated style. In such cases, the kernel's style will have to +win before the code can be merged. Putting code into the kernel means +giving up a degree of control in a number of ways - including control over +how the code is formatted. + +The other trap is to assume that code which is already in the kernel is +urgently in need of coding style fixes. Developers may start to generate +reformatting patches as a way of gaining familiarity with the process, or +as a way of getting their name into the kernel changelogs - or both. But +pure coding style fixes are seen as noise by the development community; +they tend to get a chilly reception. So this type of patch is best +avoided. It is natural to fix the style of a piece of code while working +on it for other reasons, but coding style changes should not be made for +their own sake. + +The coding style document also should not be read as an absolute law which +can never be transgressed. If there is a good reason to go against the +style (a line which becomes far less readable if split to fit within the +80-column limit, for example), just do it. + +Note that you can also use the ``clang-format`` tool to help you with +these rules, to quickly re-format parts of your code automatically, +and to review full files in order to spot coding style mistakes, +typos and possible improvements. It is also handy for sorting ``#includes``, +for aligning variables/macros, for reflowing text and other similar tasks. +See the file :ref:`Documentation/process/clang-format.rst <clangformat>` +for more details. + + +Abstraction layers +****************** + +Computer Science professors teach students to make extensive use of +abstraction layers in the name of flexibility and information hiding. +Certainly the kernel makes extensive use of abstraction; no project +involving several million lines of code could do otherwise and survive. +But experience has shown that excessive or premature abstraction can be +just as harmful as premature optimization. Abstraction should be used to +the level required and no further. + +At a simple level, consider a function which has an argument which is +always passed as zero by all callers. One could retain that argument just +in case somebody eventually needs to use the extra flexibility that it +provides. By that time, though, chances are good that the code which +implements this extra argument has been broken in some subtle way which was +never noticed - because it has never been used. Or, when the need for +extra flexibility arises, it does not do so in a way which matches the +programmer's early expectation. Kernel developers will routinely submit +patches to remove unused arguments; they should, in general, not be added +in the first place. + +Abstraction layers which hide access to hardware - often to allow the bulk +of a driver to be used with multiple operating systems - are especially +frowned upon. Such layers obscure the code and may impose a performance +penalty; they do not belong in the Linux kernel. + +On the other hand, if you find yourself copying significant amounts of code +from another kernel subsystem, it is time to ask whether it would, in fact, +make sense to pull out some of that code into a separate library or to +implement that functionality at a higher level. There is no value in +replicating the same code throughout the kernel. + + +#ifdef and preprocessor use in general +************************************** + +The C preprocessor seems to present a powerful temptation to some C +programmers, who see it as a way to efficiently encode a great deal of +flexibility into a source file. But the preprocessor is not C, and heavy +use of it results in code which is much harder for others to read and +harder for the compiler to check for correctness. Heavy preprocessor use +is almost always a sign of code which needs some cleanup work. + +Conditional compilation with #ifdef is, indeed, a powerful feature, and it +is used within the kernel. But there is little desire to see code which is +sprinkled liberally with #ifdef blocks. As a general rule, #ifdef use +should be confined to header files whenever possible. +Conditionally-compiled code can be confined to functions which, if the code +is not to be present, simply become empty. The compiler will then quietly +optimize out the call to the empty function. The result is far cleaner +code which is easier to follow. + +C preprocessor macros present a number of hazards, including possible +multiple evaluation of expressions with side effects and no type safety. +If you are tempted to define a macro, consider creating an inline function +instead. The code which results will be the same, but inline functions are +easier to read, do not evaluate their arguments multiple times, and allow +the compiler to perform type checking on the arguments and return value. + + +Inline functions +**************** + +Inline functions present a hazard of their own, though. Programmers can +become enamored of the perceived efficiency inherent in avoiding a function +call and fill a source file with inline functions. Those functions, +however, can actually reduce performance. Since their code is replicated +at each call site, they end up bloating the size of the compiled kernel. +That, in turn, creates pressure on the processor's memory caches, which can +slow execution dramatically. Inline functions, as a rule, should be quite +small and relatively rare. The cost of a function call, after all, is not +that high; the creation of large numbers of inline functions is a classic +example of premature optimization. + +In general, kernel programmers ignore cache effects at their peril. The +classic time/space tradeoff taught in beginning data structures classes +often does not apply to contemporary hardware. Space *is* time, in that a +larger program will run slower than one which is more compact. + +More recent compilers take an increasingly active role in deciding whether +a given function should actually be inlined or not. So the liberal +placement of "inline" keywords may not just be excessive; it could also be +irrelevant. + + +Locking +******* + +In May, 2006, the "Devicescape" networking stack was, with great +fanfare, released under the GPL and made available for inclusion in the +mainline kernel. This donation was welcome news; support for wireless +networking in Linux was considered substandard at best, and the Devicescape +stack offered the promise of fixing that situation. Yet, this code did not +actually make it into the mainline until June, 2007 (2.6.22). What +happened? + +This code showed a number of signs of having been developed behind +corporate doors. But one large problem in particular was that it was not +designed to work on multiprocessor systems. Before this networking stack +(now called mac80211) could be merged, a locking scheme needed to be +retrofitted onto it. + +Once upon a time, Linux kernel code could be developed without thinking +about the concurrency issues presented by multiprocessor systems. Now, +however, this document is being written on a dual-core laptop. Even on +single-processor systems, work being done to improve responsiveness will +raise the level of concurrency within the kernel. The days when kernel +code could be written without thinking about locking are long past. + +Any resource (data structures, hardware registers, etc.) which could be +accessed concurrently by more than one thread must be protected by a lock. +New code should be written with this requirement in mind; retrofitting +locking after the fact is a rather more difficult task. Kernel developers +should take the time to understand the available locking primitives well +enough to pick the right tool for the job. Code which shows a lack of +attention to concurrency will have a difficult path into the mainline. + + +Regressions +*********** + +One final hazard worth mentioning is this: it can be tempting to make a +change (which may bring big improvements) which causes something to break +for existing users. This kind of change is called a "regression," and +regressions have become most unwelcome in the mainline kernel. With few +exceptions, changes which cause regressions will be backed out if the +regression cannot be fixed in a timely manner. Far better to avoid the +regression in the first place. + +It is often argued that a regression can be justified if it causes things +to work for more people than it creates problems for. Why not make a +change if it brings new functionality to ten systems for each one it +breaks? The best answer to this question was expressed by Linus in July, +2007: + +:: + + So we don't fix bugs by introducing new problems. That way lies + madness, and nobody ever knows if you actually make any real + progress at all. Is it two steps forwards, one step back, or one + step forward and two steps back? + +(http://lwn.net/Articles/243460/). + +An especially unwelcome type of regression is any sort of change to the +user-space ABI. Once an interface has been exported to user space, it must +be supported indefinitely. This fact makes the creation of user-space +interfaces particularly challenging: since they cannot be changed in +incompatible ways, they must be done right the first time. For this +reason, a great deal of thought, clear documentation, and wide review for +user-space interfaces is always required. + + +Code checking tools +------------------- + +For now, at least, the writing of error-free code remains an ideal that few +of us can reach. What we can hope to do, though, is to catch and fix as +many of those errors as possible before our code goes into the mainline +kernel. To that end, the kernel developers have put together an impressive +array of tools which can catch a wide variety of obscure problems in an +automated way. Any problem caught by the computer is a problem which will +not afflict a user later on, so it stands to reason that the automated +tools should be used whenever possible. + +The first step is simply to heed the warnings produced by the compiler. +Contemporary versions of gcc can detect (and warn about) a large number of +potential errors. Quite often, these warnings point to real problems. +Code submitted for review should, as a rule, not produce any compiler +warnings. When silencing warnings, take care to understand the real cause +and try to avoid "fixes" which make the warning go away without addressing +its cause. + +Note that not all compiler warnings are enabled by default. Build the +kernel with "make EXTRA_CFLAGS=-W" to get the full set. + +The kernel provides several configuration options which turn on debugging +features; most of these are found in the "kernel hacking" submenu. Several +of these options should be turned on for any kernel used for development or +testing purposes. In particular, you should turn on: + + - ENABLE_WARN_DEPRECATED, ENABLE_MUST_CHECK, and FRAME_WARN to get an + extra set of warnings for problems like the use of deprecated interfaces + or ignoring an important return value from a function. The output + generated by these warnings can be verbose, but one need not worry about + warnings from other parts of the kernel. + + - DEBUG_OBJECTS will add code to track the lifetime of various objects + created by the kernel and warn when things are done out of order. If + you are adding a subsystem which creates (and exports) complex objects + of its own, consider adding support for the object debugging + infrastructure. + + - DEBUG_SLAB can find a variety of memory allocation and use errors; it + should be used on most development kernels. + + - DEBUG_SPINLOCK, DEBUG_ATOMIC_SLEEP, and DEBUG_MUTEXES will find a + number of common locking errors. + +There are quite a few other debugging options, some of which will be +discussed below. Some of them have a significant performance impact and +should not be used all of the time. But some time spent learning the +available options will likely be paid back many times over in short order. + +One of the heavier debugging tools is the locking checker, or "lockdep." +This tool will track the acquisition and release of every lock (spinlock or +mutex) in the system, the order in which locks are acquired relative to +each other, the current interrupt environment, and more. It can then +ensure that locks are always acquired in the same order, that the same +interrupt assumptions apply in all situations, and so on. In other words, +lockdep can find a number of scenarios in which the system could, on rare +occasion, deadlock. This kind of problem can be painful (for both +developers and users) in a deployed system; lockdep allows them to be found +in an automated manner ahead of time. Code with any sort of non-trivial +locking should be run with lockdep enabled before being submitted for +inclusion. + +As a diligent kernel programmer, you will, beyond doubt, check the return +status of any operation (such as a memory allocation) which can fail. The +fact of the matter, though, is that the resulting failure recovery paths +are, probably, completely untested. Untested code tends to be broken code; +you could be much more confident of your code if all those error-handling +paths had been exercised a few times. + +The kernel provides a fault injection framework which can do exactly that, +especially where memory allocations are involved. With fault injection +enabled, a configurable percentage of memory allocations will be made to +fail; these failures can be restricted to a specific range of code. +Running with fault injection enabled allows the programmer to see how the +code responds when things go badly. See +Documentation/fault-injection/fault-injection.txt for more information on +how to use this facility. + +Other kinds of errors can be found with the "sparse" static analysis tool. +With sparse, the programmer can be warned about confusion between +user-space and kernel-space addresses, mixture of big-endian and +small-endian quantities, the passing of integer values where a set of bit +flags is expected, and so on. Sparse must be installed separately (it can +be found at https://sparse.wiki.kernel.org/index.php/Main_Page if your +distributor does not package it); it can then be run on the code by adding +"C=1" to your make command. + +The "Coccinelle" tool (http://coccinelle.lip6.fr/) is able to find a wide +variety of potential coding problems; it can also propose fixes for those +problems. Quite a few "semantic patches" for the kernel have been packaged +under the scripts/coccinelle directory; running "make coccicheck" will run +through those semantic patches and report on any problems found. See +Documentation/dev-tools/coccinelle.rst for more information. + +Other kinds of portability errors are best found by compiling your code for +other architectures. If you do not happen to have an S/390 system or a +Blackfin development board handy, you can still perform the compilation +step. A large set of cross compilers for x86 systems can be found at + + http://www.kernel.org/pub/tools/crosstool/ + +Some time spent installing and using these compilers will help avoid +embarrassment later. + + +Documentation +------------- + +Documentation has often been more the exception than the rule with kernel +development. Even so, adequate documentation will help to ease the merging +of new code into the kernel, make life easier for other developers, and +will be helpful for your users. In many cases, the addition of +documentation has become essentially mandatory. + +The first piece of documentation for any patch is its associated +changelog. Log entries should describe the problem being solved, the form +of the solution, the people who worked on the patch, any relevant +effects on performance, and anything else that might be needed to +understand the patch. Be sure that the changelog says *why* the patch is +worth applying; a surprising number of developers fail to provide that +information. + +Any code which adds a new user-space interface - including new sysfs or +/proc files - should include documentation of that interface which enables +user-space developers to know what they are working with. See +Documentation/ABI/README for a description of how this documentation should +be formatted and what information needs to be provided. + +The file :ref:`Documentation/admin-guide/kernel-parameters.rst +<kernelparameters>` describes all of the kernel's boot-time parameters. +Any patch which adds new parameters should add the appropriate entries to +this file. + +Any new configuration options must be accompanied by help text which +clearly explains the options and when the user might want to select them. + +Internal API information for many subsystems is documented by way of +specially-formatted comments; these comments can be extracted and formatted +in a number of ways by the "kernel-doc" script. If you are working within +a subsystem which has kerneldoc comments, you should maintain them and add +them, as appropriate, for externally-available functions. Even in areas +which have not been so documented, there is no harm in adding kerneldoc +comments for the future; indeed, this can be a useful activity for +beginning kernel developers. The format of these comments, along with some +information on how to create kerneldoc templates can be found at +:ref:`Documentation/doc-guide/ <doc_guide>`. + +Anybody who reads through a significant amount of existing kernel code will +note that, often, comments are most notable by their absence. Once again, +the expectations for new code are higher than they were in the past; +merging uncommented code will be harder. That said, there is little desire +for verbosely-commented code. The code should, itself, be readable, with +comments explaining the more subtle aspects. + +Certain things should always be commented. Uses of memory barriers should +be accompanied by a line explaining why the barrier is necessary. The +locking rules for data structures generally need to be explained somewhere. +Major data structures need comprehensive documentation in general. +Non-obvious dependencies between separate bits of code should be pointed +out. Anything which might tempt a code janitor to make an incorrect +"cleanup" needs a comment saying why it is done the way it is. And so on. + + +Internal API changes +-------------------- + +The binary interface provided by the kernel to user space cannot be broken +except under the most severe circumstances. The kernel's internal +programming interfaces, instead, are highly fluid and can be changed when +the need arises. If you find yourself having to work around a kernel API, +or simply not using a specific functionality because it does not meet your +needs, that may be a sign that the API needs to change. As a kernel +developer, you are empowered to make such changes. + +There are, of course, some catches. API changes can be made, but they need +to be well justified. So any patch making an internal API change should be +accompanied by a description of what the change is and why it is +necessary. This kind of change should also be broken out into a separate +patch, rather than buried within a larger patch. + +The other catch is that a developer who changes an internal API is +generally charged with the task of fixing any code within the kernel tree +which is broken by the change. For a widely-used function, this duty can +lead to literally hundreds or thousands of changes - many of which are +likely to conflict with work being done by other developers. Needless to +say, this can be a large job, so it is best to be sure that the +justification is solid. Note that the Coccinelle tool can help with +wide-ranging API changes. + +When making an incompatible API change, one should, whenever possible, +ensure that code which has not been updated is caught by the compiler. +This will help you to be sure that you have found all in-tree uses of that +interface. It will also alert developers of out-of-tree code that there is +a change that they need to respond to. Supporting out-of-tree code is not +something that kernel developers need to be worried about, but we also do +not have to make life harder for out-of-tree developers than it needs to +be. diff --git a/Documentation/process/5.Posting.rst b/Documentation/process/5.Posting.rst new file mode 100644 index 000000000..c418c5d6c --- /dev/null +++ b/Documentation/process/5.Posting.rst @@ -0,0 +1,326 @@ +.. _development_posting: + +Posting patches +=============== + +Sooner or later, the time comes when your work is ready to be presented to +the community for review and, eventually, inclusion into the mainline +kernel. Unsurprisingly, the kernel development community has evolved a set +of conventions and procedures which are used in the posting of patches; +following them will make life much easier for everybody involved. This +document will attempt to cover these expectations in reasonable detail; +more information can also be found in the files process/submitting-patches.rst, +process/submitting-drivers.rst, and process/submit-checklist.rst in the kernel +documentation directory. + + +When to post +------------ + +There is a constant temptation to avoid posting patches before they are +completely "ready." For simple patches, that is not a problem. If the +work being done is complex, though, there is a lot to be gained by getting +feedback from the community before the work is complete. So you should +consider posting in-progress work, or even making a git tree available so +that interested developers can catch up with your work at any time. + +When posting code which is not yet considered ready for inclusion, it is a +good idea to say so in the posting itself. Also mention any major work +which remains to be done and any known problems. Fewer people will look at +patches which are known to be half-baked, but those who do will come in +with the idea that they can help you drive the work in the right direction. + + +Before creating patches +----------------------- + +There are a number of things which should be done before you consider +sending patches to the development community. These include: + + - Test the code to the extent that you can. Make use of the kernel's + debugging tools, ensure that the kernel will build with all reasonable + combinations of configuration options, use cross-compilers to build for + different architectures, etc. + + - Make sure your code is compliant with the kernel coding style + guidelines. + + - Does your change have performance implications? If so, you should run + benchmarks showing what the impact (or benefit) of your change is; a + summary of the results should be included with the patch. + + - Be sure that you have the right to post the code. If this work was done + for an employer, the employer likely has a right to the work and must be + agreeable with its release under the GPL. + +As a general rule, putting in some extra thought before posting code almost +always pays back the effort in short order. + + +Patch preparation +----------------- + +The preparation of patches for posting can be a surprising amount of work, +but, once again, attempting to save time here is not generally advisable +even in the short term. + +Patches must be prepared against a specific version of the kernel. As a +general rule, a patch should be based on the current mainline as found in +Linus's git tree. When basing on mainline, start with a well-known release +point - a stable or -rc release - rather than branching off the mainline at +an arbitrary spot. + +It may become necessary to make versions against -mm, linux-next, or a +subsystem tree, though, to facilitate wider testing and review. Depending +on the area of your patch and what is going on elsewhere, basing a patch +against these other trees can require a significant amount of work +resolving conflicts and dealing with API changes. + +Only the most simple changes should be formatted as a single patch; +everything else should be made as a logical series of changes. Splitting +up patches is a bit of an art; some developers spend a long time figuring +out how to do it in the way that the community expects. There are a few +rules of thumb, however, which can help considerably: + + - The patch series you post will almost certainly not be the series of + changes found in your working revision control system. Instead, the + changes you have made need to be considered in their final form, then + split apart in ways which make sense. The developers are interested in + discrete, self-contained changes, not the path you took to get to those + changes. + + - Each logically independent change should be formatted as a separate + patch. These changes can be small ("add a field to this structure") or + large (adding a significant new driver, for example), but they should be + conceptually small and amenable to a one-line description. Each patch + should make a specific change which can be reviewed on its own and + verified to do what it says it does. + + - As a way of restating the guideline above: do not mix different types of + changes in the same patch. If a single patch fixes a critical security + bug, rearranges a few structures, and reformats the code, there is a + good chance that it will be passed over and the important fix will be + lost. + + - Each patch should yield a kernel which builds and runs properly; if your + patch series is interrupted in the middle, the result should still be a + working kernel. Partial application of a patch series is a common + scenario when the "git bisect" tool is used to find regressions; if the + result is a broken kernel, you will make life harder for developers and + users who are engaging in the noble work of tracking down problems. + + - Do not overdo it, though. One developer once posted a set of edits + to a single file as 500 separate patches - an act which did not make him + the most popular person on the kernel mailing list. A single patch can + be reasonably large as long as it still contains a single *logical* + change. + + - It can be tempting to add a whole new infrastructure with a series of + patches, but to leave that infrastructure unused until the final patch + in the series enables the whole thing. This temptation should be + avoided if possible; if that series adds regressions, bisection will + finger the last patch as the one which caused the problem, even though + the real bug is elsewhere. Whenever possible, a patch which adds new + code should make that code active immediately. + +Working to create the perfect patch series can be a frustrating process +which takes quite a bit of time and thought after the "real work" has been +done. When done properly, though, it is time well spent. + + +Patch formatting and changelogs +------------------------------- + +So now you have a perfect series of patches for posting, but the work is +not done quite yet. Each patch needs to be formatted into a message which +quickly and clearly communicates its purpose to the rest of the world. To +that end, each patch will be composed of the following: + + - An optional "From" line naming the author of the patch. This line is + only necessary if you are passing on somebody else's patch via email, + but it never hurts to add it when in doubt. + + - A one-line description of what the patch does. This message should be + enough for a reader who sees it with no other context to figure out the + scope of the patch; it is the line that will show up in the "short form" + changelogs. This message is usually formatted with the relevant + subsystem name first, followed by the purpose of the patch. For + example: + + :: + + gpio: fix build on CONFIG_GPIO_SYSFS=n + + - A blank line followed by a detailed description of the contents of the + patch. This description can be as long as is required; it should say + what the patch does and why it should be applied to the kernel. + + - One or more tag lines, with, at a minimum, one Signed-off-by: line from + the author of the patch. Tags will be described in more detail below. + +The items above, together, form the changelog for the patch. Writing good +changelogs is a crucial but often-neglected art; it's worth spending +another moment discussing this issue. When writing a changelog, you should +bear in mind that a number of different people will be reading your words. +These include subsystem maintainers and reviewers who need to decide +whether the patch should be included, distributors and other maintainers +trying to decide whether a patch should be backported to other kernels, bug +hunters wondering whether the patch is responsible for a problem they are +chasing, users who want to know how the kernel has changed, and more. A +good changelog conveys the needed information to all of these people in the +most direct and concise way possible. + +To that end, the summary line should describe the effects of and motivation +for the change as well as possible given the one-line constraint. The +detailed description can then amplify on those topics and provide any +needed additional information. If the patch fixes a bug, cite the commit +which introduced the bug if possible (and please provide both the commit ID +and the title when citing commits). If a problem is associated with +specific log or compiler output, include that output to help others +searching for a solution to the same problem. If the change is meant to +support other changes coming in later patch, say so. If internal APIs are +changed, detail those changes and how other developers should respond. In +general, the more you can put yourself into the shoes of everybody who will +be reading your changelog, the better that changelog (and the kernel as a +whole) will be. + +Needless to say, the changelog should be the text used when committing the +change to a revision control system. It will be followed by: + + - The patch itself, in the unified ("-u") patch format. Using the "-p" + option to diff will associate function names with changes, making the + resulting patch easier for others to read. + +You should avoid including changes to irrelevant files (those generated by +the build process, for example, or editor backup files) in the patch. The +file "dontdiff" in the Documentation directory can help in this regard; +pass it to diff with the "-X" option. + +The tags mentioned above are used to describe how various developers have +been associated with the development of this patch. They are described in +detail in the process/submitting-patches.rst document; what follows here is a +brief summary. Each of these lines has the format: + +:: + + tag: Full Name <email address> optional-other-stuff + +The tags in common use are: + + - Signed-off-by: this is a developer's certification that he or she has + the right to submit the patch for inclusion into the kernel. It is an + agreement to the Developer's Certificate of Origin, the full text of + which can be found in Documentation/process/submitting-patches.rst. Code + without a proper signoff cannot be merged into the mainline. + + - Co-developed-by: states that the patch was also created by another developer + along with the original author. This is useful at times when multiple + people work on a single patch. Note, this person also needs to have a + Signed-off-by: line in the patch as well. + + - Acked-by: indicates an agreement by another developer (often a + maintainer of the relevant code) that the patch is appropriate for + inclusion into the kernel. + + - Tested-by: states that the named person has tested the patch and found + it to work. + + - Reviewed-by: the named developer has reviewed the patch for correctness; + see the reviewer's statement in Documentation/process/submitting-patches.rst + for more detail. + + - Reported-by: names a user who reported a problem which is fixed by this + patch; this tag is used to give credit to the (often underappreciated) + people who test our code and let us know when things do not work + correctly. + + - Cc: the named person received a copy of the patch and had the + opportunity to comment on it. + +Be careful in the addition of tags to your patches: only Cc: is appropriate +for addition without the explicit permission of the person named. + + +Sending the patch +----------------- + +Before you mail your patches, there are a couple of other things you should +take care of: + + - Are you sure that your mailer will not corrupt the patches? Patches + which have had gratuitous white-space changes or line wrapping performed + by the mail client will not apply at the other end, and often will not + be examined in any detail. If there is any doubt at all, mail the patch + to yourself and convince yourself that it shows up intact. + + Documentation/process/email-clients.rst has some helpful hints on making + specific mail clients work for sending patches. + + - Are you sure your patch is free of silly mistakes? You should always + run patches through scripts/checkpatch.pl and address the complaints it + comes up with. Please bear in mind that checkpatch.pl, while being the + embodiment of a fair amount of thought about what kernel patches should + look like, is not smarter than you. If fixing a checkpatch.pl complaint + would make the code worse, don't do it. + +Patches should always be sent as plain text. Please do not send them as +attachments; that makes it much harder for reviewers to quote sections of +the patch in their replies. Instead, just put the patch directly into your +message. + +When mailing patches, it is important to send copies to anybody who might +be interested in it. Unlike some other projects, the kernel encourages +people to err on the side of sending too many copies; don't assume that the +relevant people will see your posting on the mailing lists. In particular, +copies should go to: + + - The maintainer(s) of the affected subsystem(s). As described earlier, + the MAINTAINERS file is the first place to look for these people. + + - Other developers who have been working in the same area - especially + those who might be working there now. Using git to see who else has + modified the files you are working on can be helpful. + + - If you are responding to a bug report or a feature request, copy the + original poster as well. + + - Send a copy to the relevant mailing list, or, if nothing else applies, + the linux-kernel list. + + - If you are fixing a bug, think about whether the fix should go into the + next stable update. If so, stable@vger.kernel.org should get a copy of + the patch. Also add a "Cc: stable@vger.kernel.org" to the tags within + the patch itself; that will cause the stable team to get a notification + when your fix goes into the mainline. + +When selecting recipients for a patch, it is good to have an idea of who +you think will eventually accept the patch and get it merged. While it +is possible to send patches directly to Linus Torvalds and have him merge +them, things are not normally done that way. Linus is busy, and there are +subsystem maintainers who watch over specific parts of the kernel. Usually +you will be wanting that maintainer to merge your patches. If there is no +obvious maintainer, Andrew Morton is often the patch target of last resort. + +Patches need good subject lines. The canonical format for a patch line is +something like: + +:: + + [PATCH nn/mm] subsys: one-line description of the patch + +where "nn" is the ordinal number of the patch, "mm" is the total number of +patches in the series, and "subsys" is the name of the affected subsystem. +Clearly, nn/mm can be omitted for a single, standalone patch. + +If you have a significant series of patches, it is customary to send an +introductory description as part zero. This convention is not universally +followed though; if you use it, remember that information in the +introduction does not make it into the kernel changelogs. So please ensure +that the patches, themselves, have complete changelog information. + +In general, the second and following parts of a multi-part patch should be +sent as a reply to the first part so that they all thread together at the +receiving end. Tools like git and quilt have commands to mail out a set of +patches with the proper threading. If you have a long series, though, and +are using git, please stay away from the --chain-reply-to option to avoid +creating exceptionally deep nesting. diff --git a/Documentation/process/6.Followthrough.rst b/Documentation/process/6.Followthrough.rst new file mode 100644 index 000000000..a173cd5f9 --- /dev/null +++ b/Documentation/process/6.Followthrough.rst @@ -0,0 +1,212 @@ +.. _development_followthrough: + +Followthrough +============= + +At this point, you have followed the guidelines given so far and, with the +addition of your own engineering skills, have posted a perfect series of +patches. One of the biggest mistakes that even experienced kernel +developers can make is to conclude that their work is now done. In truth, +posting patches indicates a transition into the next stage of the process, +with, possibly, quite a bit of work yet to be done. + +It is a rare patch which is so good at its first posting that there is no +room for improvement. The kernel development process recognizes this fact, +and, as a result, is heavily oriented toward the improvement of posted +code. You, as the author of that code, will be expected to work with the +kernel community to ensure that your code is up to the kernel's quality +standards. A failure to participate in this process is quite likely to +prevent the inclusion of your patches into the mainline. + + +Working with reviewers +---------------------- + +A patch of any significance will result in a number of comments from other +developers as they review the code. Working with reviewers can be, for +many developers, the most intimidating part of the kernel development +process. Life can be made much easier, though, if you keep a few things in +mind: + + - If you have explained your patch well, reviewers will understand its + value and why you went to the trouble of writing it. But that value + will not keep them from asking a fundamental question: what will it be + like to maintain a kernel with this code in it five or ten years later? + Many of the changes you may be asked to make - from coding style tweaks + to substantial rewrites - come from the understanding that Linux will + still be around and under development a decade from now. + + - Code review is hard work, and it is a relatively thankless occupation; + people remember who wrote kernel code, but there is little lasting fame + for those who reviewed it. So reviewers can get grumpy, especially when + they see the same mistakes being made over and over again. If you get a + review which seems angry, insulting, or outright offensive, resist the + impulse to respond in kind. Code review is about the code, not about + the people, and code reviewers are not attacking you personally. + + - Similarly, code reviewers are not trying to promote their employers' + agendas at the expense of your own. Kernel developers often expect to + be working on the kernel years from now, but they understand that their + employer could change. They truly are, almost without exception, + working toward the creation of the best kernel they can; they are not + trying to create discomfort for their employers' competitors. + +What all of this comes down to is that, when reviewers send you comments, +you need to pay attention to the technical observations that they are +making. Do not let their form of expression or your own pride keep that +from happening. When you get review comments on a patch, take the time to +understand what the reviewer is trying to say. If possible, fix the things +that the reviewer is asking you to fix. And respond back to the reviewer: +thank them, and describe how you will answer their questions. + +Note that you do not have to agree with every change suggested by +reviewers. If you believe that the reviewer has misunderstood your code, +explain what is really going on. If you have a technical objection to a +suggested change, describe it and justify your solution to the problem. If +your explanations make sense, the reviewer will accept them. Should your +explanation not prove persuasive, though, especially if others start to +agree with the reviewer, take some time to think things over again. It can +be easy to become blinded by your own solution to a problem to the point +that you don't realize that something is fundamentally wrong or, perhaps, +you're not even solving the right problem. + +Andrew Morton has suggested that every review comment which does not result +in a code change should result in an additional code comment instead; that +can help future reviewers avoid the questions which came up the first time +around. + +One fatal mistake is to ignore review comments in the hope that they will +go away. They will not go away. If you repost code without having +responded to the comments you got the time before, you're likely to find +that your patches go nowhere. + +Speaking of reposting code: please bear in mind that reviewers are not +going to remember all the details of the code you posted the last time +around. So it is always a good idea to remind reviewers of previously +raised issues and how you dealt with them; the patch changelog is a good +place for this kind of information. Reviewers should not have to search +through list archives to familiarize themselves with what was said last +time; if you help them get a running start, they will be in a better mood +when they revisit your code. + +What if you've tried to do everything right and things still aren't going +anywhere? Most technical disagreements can be resolved through discussion, +but there are times when somebody simply has to make a decision. If you +honestly believe that this decision is going against you wrongly, you can +always try appealing to a higher power. As of this writing, that higher +power tends to be Andrew Morton. Andrew has a great deal of respect in the +kernel development community; he can often unjam a situation which seems to +be hopelessly blocked. Appealing to Andrew should not be done lightly, +though, and not before all other alternatives have been explored. And bear +in mind, of course, that he may not agree with you either. + + +What happens next +----------------- + +If a patch is considered to be a good thing to add to the kernel, and once +most of the review issues have been resolved, the next step is usually +entry into a subsystem maintainer's tree. How that works varies from one +subsystem to the next; each maintainer has his or her own way of doing +things. In particular, there may be more than one tree - one, perhaps, +dedicated to patches planned for the next merge window, and another for +longer-term work. + +For patches applying to areas for which there is no obvious subsystem tree +(memory management patches, for example), the default tree often ends up +being -mm. Patches which affect multiple subsystems can also end up going +through the -mm tree. + +Inclusion into a subsystem tree can bring a higher level of visibility to a +patch. Now other developers working with that tree will get the patch by +default. Subsystem trees typically feed linux-next as well, making their +contents visible to the development community as a whole. At this point, +there's a good chance that you will get more comments from a new set of +reviewers; these comments need to be answered as in the previous round. + +What may also happen at this point, depending on the nature of your patch, +is that conflicts with work being done by others turn up. In the worst +case, heavy patch conflicts can result in some work being put on the back +burner so that the remaining patches can be worked into shape and merged. +Other times, conflict resolution will involve working with the other +developers and, possibly, moving some patches between trees to ensure that +everything applies cleanly. This work can be a pain, but count your +blessings: before the advent of the linux-next tree, these conflicts often +only turned up during the merge window and had to be addressed in a hurry. +Now they can be resolved at leisure, before the merge window opens. + +Some day, if all goes well, you'll log on and see that your patch has been +merged into the mainline kernel. Congratulations! Once the celebration is +complete (and you have added yourself to the MAINTAINERS file), though, it +is worth remembering an important little fact: the job still is not done. +Merging into the mainline brings its own challenges. + +To begin with, the visibility of your patch has increased yet again. There +may be a new round of comments from developers who had not been aware of +the patch before. It may be tempting to ignore them, since there is no +longer any question of your code being merged. Resist that temptation, +though; you still need to be responsive to developers who have questions or +suggestions. + +More importantly, though: inclusion into the mainline puts your code into +the hands of a much larger group of testers. Even if you have contributed +a driver for hardware which is not yet available, you will be surprised by +how many people will build your code into their kernels. And, of course, +where there are testers, there will be bug reports. + +The worst sort of bug reports are regressions. If your patch causes a +regression, you'll find an uncomfortable number of eyes upon you; +regressions need to be fixed as soon as possible. If you are unwilling or +unable to fix the regression (and nobody else does it for you), your patch +will almost certainly be removed during the stabilization period. Beyond +negating all of the work you have done to get your patch into the mainline, +having a patch pulled as the result of a failure to fix a regression could +well make it harder for you to get work merged in the future. + +After any regressions have been dealt with, there may be other, ordinary +bugs to deal with. The stabilization period is your best opportunity to +fix these bugs and ensure that your code's debut in a mainline kernel +release is as solid as possible. So, please, answer bug reports, and fix +the problems if at all possible. That's what the stabilization period is +for; you can start creating cool new patches once any problems with the old +ones have been taken care of. + +And don't forget that there are other milestones which may also create bug +reports: the next mainline stable release, when prominent distributors pick +up a version of the kernel containing your patch, etc. Continuing to +respond to these reports is a matter of basic pride in your work. If that +is insufficient motivation, though, it's also worth considering that the +development community remembers developers who lose interest in their code +after it's merged. The next time you post a patch, they will be evaluating +it with the assumption that you will not be around to maintain it +afterward. + + +Other things that can happen +----------------------------- + +One day, you may open your mail client and see that somebody has mailed you +a patch to your code. That is one of the advantages of having your code +out there in the open, after all. If you agree with the patch, you can +either forward it on to the subsystem maintainer (be sure to include a +proper From: line so that the attribution is correct, and add a signoff of +your own), or send an Acked-by: response back and let the original poster +send it upward. + +If you disagree with the patch, send a polite response explaining why. If +possible, tell the author what changes need to be made to make the patch +acceptable to you. There is a certain resistance to merging patches which +are opposed by the author and maintainer of the code, but it only goes so +far. If you are seen as needlessly blocking good work, those patches will +eventually flow around you and get into the mainline anyway. In the Linux +kernel, nobody has absolute veto power over any code. Except maybe Linus. + +On very rare occasion, you may see something completely different: another +developer posts a different solution to your problem. At that point, +chances are that one of the two patches will not be merged, and "mine was +here first" is not considered to be a compelling technical argument. If +somebody else's patch displaces yours and gets into the mainline, there is +really only one way to respond: be pleased that your problem got solved and +get on with your work. Having one's work shoved aside in this manner can +be hurtful and discouraging, but the community will remember your reaction +long after they have forgotten whose patch actually got merged. diff --git a/Documentation/process/7.AdvancedTopics.rst b/Documentation/process/7.AdvancedTopics.rst new file mode 100644 index 000000000..172733cff --- /dev/null +++ b/Documentation/process/7.AdvancedTopics.rst @@ -0,0 +1,178 @@ +.. _development_advancedtopics: + +Advanced topics +=============== + +At this point, hopefully, you have a handle on how the development process +works. There is still more to learn, however! This section will cover a +number of topics which can be helpful for developers wanting to become a +regular part of the Linux kernel development process. + +Managing patches with git +------------------------- + +The use of distributed version control for the kernel began in early 2002, +when Linus first started playing with the proprietary BitKeeper +application. While BitKeeper was controversial, the approach to software +version management it embodied most certainly was not. Distributed version +control enabled an immediate acceleration of the kernel development +project. In current times, there are several free alternatives to +BitKeeper. For better or for worse, the kernel project has settled on git +as its tool of choice. + +Managing patches with git can make life much easier for the developer, +especially as the volume of those patches grows. Git also has its rough +edges and poses certain hazards; it is a young and powerful tool which is +still being civilized by its developers. This document will not attempt to +teach the reader how to use git; that would be sufficient material for a +long document in its own right. Instead, the focus here will be on how git +fits into the kernel development process in particular. Developers who +wish to come up to speed with git will find more information at: + + http://git-scm.com/ + + http://www.kernel.org/pub/software/scm/git/docs/user-manual.html + +and on various tutorials found on the web. + +The first order of business is to read the above sites and get a solid +understanding of how git works before trying to use it to make patches +available to others. A git-using developer should be able to obtain a copy +of the mainline repository, explore the revision history, commit changes to +the tree, use branches, etc. An understanding of git's tools for the +rewriting of history (such as rebase) is also useful. Git comes with its +own terminology and concepts; a new user of git should know about refs, +remote branches, the index, fast-forward merges, pushes and pulls, detached +heads, etc. It can all be a little intimidating at the outset, but the +concepts are not that hard to grasp with a bit of study. + +Using git to generate patches for submission by email can be a good +exercise while coming up to speed. + +When you are ready to start putting up git trees for others to look at, you +will, of course, need a server that can be pulled from. Setting up such a +server with git-daemon is relatively straightforward if you have a system +which is accessible to the Internet. Otherwise, free, public hosting sites +(Github, for example) are starting to appear on the net. Established +developers can get an account on kernel.org, but those are not easy to come +by; see http://kernel.org/faq/ for more information. + +The normal git workflow involves the use of a lot of branches. Each line +of development can be separated into a separate "topic branch" and +maintained independently. Branches in git are cheap, there is no reason to +not make free use of them. And, in any case, you should not do your +development in any branch which you intend to ask others to pull from. +Publicly-available branches should be created with care; merge in patches +from development branches when they are in complete form and ready to go - +not before. + +Git provides some powerful tools which can allow you to rewrite your +development history. An inconvenient patch (one which breaks bisection, +say, or which has some other sort of obvious bug) can be fixed in place or +made to disappear from the history entirely. A patch series can be +rewritten as if it had been written on top of today's mainline, even though +you have been working on it for months. Changes can be transparently +shifted from one branch to another. And so on. Judicious use of git's +ability to revise history can help in the creation of clean patch sets with +fewer problems. + +Excessive use of this capability can lead to other problems, though, beyond +a simple obsession for the creation of the perfect project history. +Rewriting history will rewrite the changes contained in that history, +turning a tested (hopefully) kernel tree into an untested one. But, beyond +that, developers cannot easily collaborate if they do not have a shared +view of the project history; if you rewrite history which other developers +have pulled into their repositories, you will make life much more difficult +for those developers. So a simple rule of thumb applies here: history +which has been exported to others should generally be seen as immutable +thereafter. + +So, once you push a set of changes to your publicly-available server, those +changes should not be rewritten. Git will attempt to enforce this rule if +you try to push changes which do not result in a fast-forward merge +(i.e. changes which do not share the same history). It is possible to +override this check, and there may be times when it is necessary to rewrite +an exported tree. Moving changesets between trees to avoid conflicts in +linux-next is one example. But such actions should be rare. This is one +of the reasons why development should be done in private branches (which +can be rewritten if necessary) and only moved into public branches when +it's in a reasonably advanced state. + +As the mainline (or other tree upon which a set of changes is based) +advances, it is tempting to merge with that tree to stay on the leading +edge. For a private branch, rebasing can be an easy way to keep up with +another tree, but rebasing is not an option once a tree is exported to the +world. Once that happens, a full merge must be done. Merging occasionally +makes good sense, but overly frequent merges can clutter the history +needlessly. Suggested technique in this case is to merge infrequently, and +generally only at specific release points (such as a mainline -rc +release). If you are nervous about specific changes, you can always +perform test merges in a private branch. The git "rerere" tool can be +useful in such situations; it remembers how merge conflicts were resolved +so that you don't have to do the same work twice. + +One of the biggest recurring complaints about tools like git is this: the +mass movement of patches from one repository to another makes it easy to +slip in ill-advised changes which go into the mainline below the review +radar. Kernel developers tend to get unhappy when they see that kind of +thing happening; putting up a git tree with unreviewed or off-topic patches +can affect your ability to get trees pulled in the future. Quoting Linus: + +:: + + You can send me patches, but for me to pull a git patch from you, I + need to know that you know what you're doing, and I need to be able + to trust things *without* then having to go and check every + individual change by hand. + +(http://lwn.net/Articles/224135/). + +To avoid this kind of situation, ensure that all patches within a given +branch stick closely to the associated topic; a "driver fixes" branch +should not be making changes to the core memory management code. And, most +importantly, do not use a git tree to bypass the review process. Post an +occasional summary of the tree to the relevant list, and, when the time is +right, request that the tree be included in linux-next. + +If and when others start to send patches for inclusion into your tree, +don't forget to review them. Also ensure that you maintain the correct +authorship information; the git "am" tool does its best in this regard, but +you may have to add a "From:" line to the patch if it has been relayed to +you via a third party. + +When requesting a pull, be sure to give all the relevant information: where +your tree is, what branch to pull, and what changes will result from the +pull. The git request-pull command can be helpful in this regard; it will +format the request as other developers expect, and will also check to be +sure that you have remembered to push those changes to the public server. + + +Reviewing patches +----------------- + +Some readers will certainly object to putting this section with "advanced +topics" on the grounds that even beginning kernel developers should be +reviewing patches. It is certainly true that there is no better way to +learn how to program in the kernel environment than by looking at code +posted by others. In addition, reviewers are forever in short supply; by +looking at code you can make a significant contribution to the process as a +whole. + +Reviewing code can be an intimidating prospect, especially for a new kernel +developer who may well feel nervous about questioning code - in public - +which has been posted by those with more experience. Even code written by +the most experienced developers can be improved, though. Perhaps the best +piece of advice for reviewers (all reviewers) is this: phrase review +comments as questions rather than criticisms. Asking "how does the lock +get released in this path?" will always work better than stating "the +locking here is wrong." + +Different developers will review code from different points of view. Some +are mostly concerned with coding style and whether code lines have trailing +white space. Others will focus primarily on whether the change implemented +by the patch as a whole is a good thing for the kernel or not. Yet others +will check for problematic locking, excessive stack usage, possible +security issues, duplication of code found elsewhere, adequate +documentation, adverse effects on performance, user-space ABI changes, etc. +All types of review, if they lead to better code going into the kernel, are +welcome and worthwhile. diff --git a/Documentation/process/8.Conclusion.rst b/Documentation/process/8.Conclusion.rst new file mode 100644 index 000000000..1c7f54cd0 --- /dev/null +++ b/Documentation/process/8.Conclusion.rst @@ -0,0 +1,74 @@ +.. _development_conclusion: + +For more information +==================== + +There are numerous sources of information on Linux kernel development and +related topics. First among those will always be the Documentation +directory found in the kernel source distribution. The top-level process/howto.rst +file is an important starting point; process/submitting-patches.rst and +process/submitting-drivers.rst are also something which all kernel developers should +read. Many internal kernel APIs are documented using the kerneldoc +mechanism; "make htmldocs" or "make pdfdocs" can be used to generate those +documents in HTML or PDF format (though the version of TeX shipped by some +distributions runs into internal limits and fails to process the documents +properly). + +Various web sites discuss kernel development at all levels of detail. Your +author would like to humbly suggest http://lwn.net/ as a source; +information on many specific kernel topics can be found via the LWN kernel +index at: + + http://lwn.net/Kernel/Index/ + +Beyond that, a valuable resource for kernel developers is: + + http://kernelnewbies.org/ + +And, of course, one should not forget http://kernel.org/, the definitive +location for kernel release information. + +There are a number of books on kernel development: + + Linux Device Drivers, 3rd Edition (Jonathan Corbet, Alessandro + Rubini, and Greg Kroah-Hartman). Online at + http://lwn.net/Kernel/LDD3/. + + Linux Kernel Development (Robert Love). + + Understanding the Linux Kernel (Daniel Bovet and Marco Cesati). + +All of these books suffer from a common fault, though: they tend to be +somewhat obsolete by the time they hit the shelves, and they have been on +the shelves for a while now. Still, there is quite a bit of good +information to be found there. + +Documentation for git can be found at: + + http://www.kernel.org/pub/software/scm/git/docs/ + + http://www.kernel.org/pub/software/scm/git/docs/user-manual.html + + +Conclusion +========== + +Congratulations to anybody who has made it through this long-winded +document. Hopefully it has provided a helpful understanding of how the +Linux kernel is developed and how you can participate in that process. + +In the end, it's the participation that matters. Any open source software +project is no more than the sum of what its contributors put into it. The +Linux kernel has progressed as quickly and as well as it has because it has +been helped by an impressively large group of developers, all of whom are +working to make it better. The kernel is a premier example of what can be +done when thousands of people work together toward a common goal. + +The kernel can always benefit from a larger developer base, though. There +is always more work to do. But, just as importantly, most other +participants in the Linux ecosystem can benefit through contributing to the +kernel. Getting code into the mainline is the key to higher code quality, +lower maintenance and distribution costs, a higher level of influence over +the direction of kernel development, and more. It is a situation where +everybody involved wins. Fire up your editor and come join us; you will be +more than welcome. diff --git a/Documentation/process/adding-syscalls.rst b/Documentation/process/adding-syscalls.rst new file mode 100644 index 000000000..0d4f29bc7 --- /dev/null +++ b/Documentation/process/adding-syscalls.rst @@ -0,0 +1,574 @@ +Adding a New System Call +======================== + +This document describes what's involved in adding a new system call to the +Linux kernel, over and above the normal submission advice in +:ref:`Documentation/process/submitting-patches.rst <submittingpatches>`. + + +System Call Alternatives +------------------------ + +The first thing to consider when adding a new system call is whether one of +the alternatives might be suitable instead. Although system calls are the +most traditional and most obvious interaction points between userspace and the +kernel, there are other possibilities -- choose what fits best for your +interface. + + - If the operations involved can be made to look like a filesystem-like + object, it may make more sense to create a new filesystem or device. This + also makes it easier to encapsulate the new functionality in a kernel module + rather than requiring it to be built into the main kernel. + + - If the new functionality involves operations where the kernel notifies + userspace that something has happened, then returning a new file + descriptor for the relevant object allows userspace to use + ``poll``/``select``/``epoll`` to receive that notification. + - However, operations that don't map to + :manpage:`read(2)`/:manpage:`write(2)`-like operations + have to be implemented as :manpage:`ioctl(2)` requests, which can lead + to a somewhat opaque API. + + - If you're just exposing runtime system information, a new node in sysfs + (see ``Documentation/filesystems/sysfs.txt``) or the ``/proc`` filesystem may + be more appropriate. However, access to these mechanisms requires that the + relevant filesystem is mounted, which might not always be the case (e.g. + in a namespaced/sandboxed/chrooted environment). Avoid adding any API to + debugfs, as this is not considered a 'production' interface to userspace. + - If the operation is specific to a particular file or file descriptor, then + an additional :manpage:`fcntl(2)` command option may be more appropriate. However, + :manpage:`fcntl(2)` is a multiplexing system call that hides a lot of complexity, so + this option is best for when the new function is closely analogous to + existing :manpage:`fcntl(2)` functionality, or the new functionality is very simple + (for example, getting/setting a simple flag related to a file descriptor). + - If the operation is specific to a particular task or process, then an + additional :manpage:`prctl(2)` command option may be more appropriate. As + with :manpage:`fcntl(2)`, this system call is a complicated multiplexor so + is best reserved for near-analogs of existing ``prctl()`` commands or + getting/setting a simple flag related to a process. + + +Designing the API: Planning for Extension +----------------------------------------- + +A new system call forms part of the API of the kernel, and has to be supported +indefinitely. As such, it's a very good idea to explicitly discuss the +interface on the kernel mailing list, and it's important to plan for future +extensions of the interface. + +(The syscall table is littered with historical examples where this wasn't done, +together with the corresponding follow-up system calls -- +``eventfd``/``eventfd2``, ``dup2``/``dup3``, ``inotify_init``/``inotify_init1``, +``pipe``/``pipe2``, ``renameat``/``renameat2`` -- so +learn from the history of the kernel and plan for extensions from the start.) + +For simpler system calls that only take a couple of arguments, the preferred +way to allow for future extensibility is to include a flags argument to the +system call. To make sure that userspace programs can safely use flags +between kernel versions, check whether the flags value holds any unknown +flags, and reject the system call (with ``EINVAL``) if it does:: + + if (flags & ~(THING_FLAG1 | THING_FLAG2 | THING_FLAG3)) + return -EINVAL; + +(If no flags values are used yet, check that the flags argument is zero.) + +For more sophisticated system calls that involve a larger number of arguments, +it's preferred to encapsulate the majority of the arguments into a structure +that is passed in by pointer. Such a structure can cope with future extension +by including a size argument in the structure:: + + struct xyzzy_params { + u32 size; /* userspace sets p->size = sizeof(struct xyzzy_params) */ + u32 param_1; + u64 param_2; + u64 param_3; + }; + +As long as any subsequently added field, say ``param_4``, is designed so that a +zero value gives the previous behaviour, then this allows both directions of +version mismatch: + + - To cope with a later userspace program calling an older kernel, the kernel + code should check that any memory beyond the size of the structure that it + expects is zero (effectively checking that ``param_4 == 0``). + - To cope with an older userspace program calling a newer kernel, the kernel + code can zero-extend a smaller instance of the structure (effectively + setting ``param_4 = 0``). + +See :manpage:`perf_event_open(2)` and the ``perf_copy_attr()`` function (in +``kernel/events/core.c``) for an example of this approach. + + +Designing the API: Other Considerations +--------------------------------------- + +If your new system call allows userspace to refer to a kernel object, it +should use a file descriptor as the handle for that object -- don't invent a +new type of userspace object handle when the kernel already has mechanisms and +well-defined semantics for using file descriptors. + +If your new :manpage:`xyzzy(2)` system call does return a new file descriptor, +then the flags argument should include a value that is equivalent to setting +``O_CLOEXEC`` on the new FD. This makes it possible for userspace to close +the timing window between ``xyzzy()`` and calling +``fcntl(fd, F_SETFD, FD_CLOEXEC)``, where an unexpected ``fork()`` and +``execve()`` in another thread could leak a descriptor to +the exec'ed program. (However, resist the temptation to re-use the actual value +of the ``O_CLOEXEC`` constant, as it is architecture-specific and is part of a +numbering space of ``O_*`` flags that is fairly full.) + +If your system call returns a new file descriptor, you should also consider +what it means to use the :manpage:`poll(2)` family of system calls on that file +descriptor. Making a file descriptor ready for reading or writing is the +normal way for the kernel to indicate to userspace that an event has +occurred on the corresponding kernel object. + +If your new :manpage:`xyzzy(2)` system call involves a filename argument:: + + int sys_xyzzy(const char __user *path, ..., unsigned int flags); + +you should also consider whether an :manpage:`xyzzyat(2)` version is more appropriate:: + + int sys_xyzzyat(int dfd, const char __user *path, ..., unsigned int flags); + +This allows more flexibility for how userspace specifies the file in question; +in particular it allows userspace to request the functionality for an +already-opened file descriptor using the ``AT_EMPTY_PATH`` flag, effectively +giving an :manpage:`fxyzzy(3)` operation for free:: + + - xyzzyat(AT_FDCWD, path, ..., 0) is equivalent to xyzzy(path,...) + - xyzzyat(fd, "", ..., AT_EMPTY_PATH) is equivalent to fxyzzy(fd, ...) + +(For more details on the rationale of the \*at() calls, see the +:manpage:`openat(2)` man page; for an example of AT_EMPTY_PATH, see the +:manpage:`fstatat(2)` man page.) + +If your new :manpage:`xyzzy(2)` system call involves a parameter describing an +offset within a file, make its type ``loff_t`` so that 64-bit offsets can be +supported even on 32-bit architectures. + +If your new :manpage:`xyzzy(2)` system call involves privileged functionality, +it needs to be governed by the appropriate Linux capability bit (checked with +a call to ``capable()``), as described in the :manpage:`capabilities(7)` man +page. Choose an existing capability bit that governs related functionality, +but try to avoid combining lots of only vaguely related functions together +under the same bit, as this goes against capabilities' purpose of splitting +the power of root. In particular, avoid adding new uses of the already +overly-general ``CAP_SYS_ADMIN`` capability. + +If your new :manpage:`xyzzy(2)` system call manipulates a process other than +the calling process, it should be restricted (using a call to +``ptrace_may_access()``) so that only a calling process with the same +permissions as the target process, or with the necessary capabilities, can +manipulate the target process. + +Finally, be aware that some non-x86 architectures have an easier time if +system call parameters that are explicitly 64-bit fall on odd-numbered +arguments (i.e. parameter 1, 3, 5), to allow use of contiguous pairs of 32-bit +registers. (This concern does not apply if the arguments are part of a +structure that's passed in by pointer.) + + +Proposing the API +----------------- + +To make new system calls easy to review, it's best to divide up the patchset +into separate chunks. These should include at least the following items as +distinct commits (each of which is described further below): + + - The core implementation of the system call, together with prototypes, + generic numbering, Kconfig changes and fallback stub implementation. + - Wiring up of the new system call for one particular architecture, usually + x86 (including all of x86_64, x86_32 and x32). + - A demonstration of the use of the new system call in userspace via a + selftest in ``tools/testing/selftests/``. + - A draft man-page for the new system call, either as plain text in the + cover letter, or as a patch to the (separate) man-pages repository. + +New system call proposals, like any change to the kernel's API, should always +be cc'ed to linux-api@vger.kernel.org. + + +Generic System Call Implementation +---------------------------------- + +The main entry point for your new :manpage:`xyzzy(2)` system call will be called +``sys_xyzzy()``, but you add this entry point with the appropriate +``SYSCALL_DEFINEn()`` macro rather than explicitly. The 'n' indicates the +number of arguments to the system call, and the macro takes the system call name +followed by the (type, name) pairs for the parameters as arguments. Using +this macro allows metadata about the new system call to be made available for +other tools. + +The new entry point also needs a corresponding function prototype, in +``include/linux/syscalls.h``, marked as asmlinkage to match the way that system +calls are invoked:: + + asmlinkage long sys_xyzzy(...); + +Some architectures (e.g. x86) have their own architecture-specific syscall +tables, but several other architectures share a generic syscall table. Add your +new system call to the generic list by adding an entry to the list in +``include/uapi/asm-generic/unistd.h``:: + + #define __NR_xyzzy 292 + __SYSCALL(__NR_xyzzy, sys_xyzzy) + +Also update the __NR_syscalls count to reflect the additional system call, and +note that if multiple new system calls are added in the same merge window, +your new syscall number may get adjusted to resolve conflicts. + +The file ``kernel/sys_ni.c`` provides a fallback stub implementation of each +system call, returning ``-ENOSYS``. Add your new system call here too:: + + COND_SYSCALL(xyzzy); + +Your new kernel functionality, and the system call that controls it, should +normally be optional, so add a ``CONFIG`` option (typically to +``init/Kconfig``) for it. As usual for new ``CONFIG`` options: + + - Include a description of the new functionality and system call controlled + by the option. + - Make the option depend on EXPERT if it should be hidden from normal users. + - Make any new source files implementing the function dependent on the CONFIG + option in the Makefile (e.g. ``obj-$(CONFIG_XYZZY_SYSCALL) += xyzzy.c``). + - Double check that the kernel still builds with the new CONFIG option turned + off. + +To summarize, you need a commit that includes: + + - ``CONFIG`` option for the new function, normally in ``init/Kconfig`` + - ``SYSCALL_DEFINEn(xyzzy, ...)`` for the entry point + - corresponding prototype in ``include/linux/syscalls.h`` + - generic table entry in ``include/uapi/asm-generic/unistd.h`` + - fallback stub in ``kernel/sys_ni.c`` + + +x86 System Call Implementation +------------------------------ + +To wire up your new system call for x86 platforms, you need to update the +master syscall tables. Assuming your new system call isn't special in some +way (see below), this involves a "common" entry (for x86_64 and x32) in +arch/x86/entry/syscalls/syscall_64.tbl:: + + 333 common xyzzy sys_xyzzy + +and an "i386" entry in ``arch/x86/entry/syscalls/syscall_32.tbl``:: + + 380 i386 xyzzy sys_xyzzy + +Again, these numbers are liable to be changed if there are conflicts in the +relevant merge window. + + +Compatibility System Calls (Generic) +------------------------------------ + +For most system calls the same 64-bit implementation can be invoked even when +the userspace program is itself 32-bit; even if the system call's parameters +include an explicit pointer, this is handled transparently. + +However, there are a couple of situations where a compatibility layer is +needed to cope with size differences between 32-bit and 64-bit. + +The first is if the 64-bit kernel also supports 32-bit userspace programs, and +so needs to parse areas of (``__user``) memory that could hold either 32-bit or +64-bit values. In particular, this is needed whenever a system call argument +is: + + - a pointer to a pointer + - a pointer to a struct containing a pointer (e.g. ``struct iovec __user *``) + - a pointer to a varying sized integral type (``time_t``, ``off_t``, + ``long``, ...) + - a pointer to a struct containing a varying sized integral type. + +The second situation that requires a compatibility layer is if one of the +system call's arguments has a type that is explicitly 64-bit even on a 32-bit +architecture, for example ``loff_t`` or ``__u64``. In this case, a value that +arrives at a 64-bit kernel from a 32-bit application will be split into two +32-bit values, which then need to be re-assembled in the compatibility layer. + +(Note that a system call argument that's a pointer to an explicit 64-bit type +does **not** need a compatibility layer; for example, :manpage:`splice(2)`'s arguments of +type ``loff_t __user *`` do not trigger the need for a ``compat_`` system call.) + +The compatibility version of the system call is called ``compat_sys_xyzzy()``, +and is added with the ``COMPAT_SYSCALL_DEFINEn()`` macro, analogously to +SYSCALL_DEFINEn. This version of the implementation runs as part of a 64-bit +kernel, but expects to receive 32-bit parameter values and does whatever is +needed to deal with them. (Typically, the ``compat_sys_`` version converts the +values to 64-bit versions and either calls on to the ``sys_`` version, or both of +them call a common inner implementation function.) + +The compat entry point also needs a corresponding function prototype, in +``include/linux/compat.h``, marked as asmlinkage to match the way that system +calls are invoked:: + + asmlinkage long compat_sys_xyzzy(...); + +If the system call involves a structure that is laid out differently on 32-bit +and 64-bit systems, say ``struct xyzzy_args``, then the include/linux/compat.h +header file should also include a compat version of the structure (``struct +compat_xyzzy_args``) where each variable-size field has the appropriate +``compat_`` type that corresponds to the type in ``struct xyzzy_args``. The +``compat_sys_xyzzy()`` routine can then use this ``compat_`` structure to +parse the arguments from a 32-bit invocation. + +For example, if there are fields:: + + struct xyzzy_args { + const char __user *ptr; + __kernel_long_t varying_val; + u64 fixed_val; + /* ... */ + }; + +in struct xyzzy_args, then struct compat_xyzzy_args would have:: + + struct compat_xyzzy_args { + compat_uptr_t ptr; + compat_long_t varying_val; + u64 fixed_val; + /* ... */ + }; + +The generic system call list also needs adjusting to allow for the compat +version; the entry in ``include/uapi/asm-generic/unistd.h`` should use +``__SC_COMP`` rather than ``__SYSCALL``:: + + #define __NR_xyzzy 292 + __SC_COMP(__NR_xyzzy, sys_xyzzy, compat_sys_xyzzy) + +To summarize, you need: + + - a ``COMPAT_SYSCALL_DEFINEn(xyzzy, ...)`` for the compat entry point + - corresponding prototype in ``include/linux/compat.h`` + - (if needed) 32-bit mapping struct in ``include/linux/compat.h`` + - instance of ``__SC_COMP`` not ``__SYSCALL`` in + ``include/uapi/asm-generic/unistd.h`` + + +Compatibility System Calls (x86) +-------------------------------- + +To wire up the x86 architecture of a system call with a compatibility version, +the entries in the syscall tables need to be adjusted. + +First, the entry in ``arch/x86/entry/syscalls/syscall_32.tbl`` gets an extra +column to indicate that a 32-bit userspace program running on a 64-bit kernel +should hit the compat entry point:: + + 380 i386 xyzzy sys_xyzzy __ia32_compat_sys_xyzzy + +Second, you need to figure out what should happen for the x32 ABI version of +the new system call. There's a choice here: the layout of the arguments +should either match the 64-bit version or the 32-bit version. + +If there's a pointer-to-a-pointer involved, the decision is easy: x32 is +ILP32, so the layout should match the 32-bit version, and the entry in +``arch/x86/entry/syscalls/syscall_64.tbl`` is split so that x32 programs hit +the compatibility wrapper:: + + 333 64 xyzzy sys_xyzzy + ... + 555 x32 xyzzy __x32_compat_sys_xyzzy + +If no pointers are involved, then it is preferable to re-use the 64-bit system +call for the x32 ABI (and consequently the entry in +arch/x86/entry/syscalls/syscall_64.tbl is unchanged). + +In either case, you should check that the types involved in your argument +layout do indeed map exactly from x32 (-mx32) to either the 32-bit (-m32) or +64-bit (-m64) equivalents. + + +System Calls Returning Elsewhere +-------------------------------- + +For most system calls, once the system call is complete the user program +continues exactly where it left off -- at the next instruction, with the +stack the same and most of the registers the same as before the system call, +and with the same virtual memory space. + +However, a few system calls do things differently. They might return to a +different location (``rt_sigreturn``) or change the memory space +(``fork``/``vfork``/``clone``) or even architecture (``execve``/``execveat``) +of the program. + +To allow for this, the kernel implementation of the system call may need to +save and restore additional registers to the kernel stack, allowing complete +control of where and how execution continues after the system call. + +This is arch-specific, but typically involves defining assembly entry points +that save/restore additional registers and invoke the real system call entry +point. + +For x86_64, this is implemented as a ``stub_xyzzy`` entry point in +``arch/x86/entry/entry_64.S``, and the entry in the syscall table +(``arch/x86/entry/syscalls/syscall_64.tbl``) is adjusted to match:: + + 333 common xyzzy stub_xyzzy + +The equivalent for 32-bit programs running on a 64-bit kernel is normally +called ``stub32_xyzzy`` and implemented in ``arch/x86/entry/entry_64_compat.S``, +with the corresponding syscall table adjustment in +``arch/x86/entry/syscalls/syscall_32.tbl``:: + + 380 i386 xyzzy sys_xyzzy stub32_xyzzy + +If the system call needs a compatibility layer (as in the previous section) +then the ``stub32_`` version needs to call on to the ``compat_sys_`` version +of the system call rather than the native 64-bit version. Also, if the x32 ABI +implementation is not common with the x86_64 version, then its syscall +table will also need to invoke a stub that calls on to the ``compat_sys_`` +version. + +For completeness, it's also nice to set up a mapping so that user-mode Linux +still works -- its syscall table will reference stub_xyzzy, but the UML build +doesn't include ``arch/x86/entry/entry_64.S`` implementation (because UML +simulates registers etc). Fixing this is as simple as adding a #define to +``arch/x86/um/sys_call_table_64.c``:: + + #define stub_xyzzy sys_xyzzy + + +Other Details +------------- + +Most of the kernel treats system calls in a generic way, but there is the +occasional exception that may need updating for your particular system call. + +The audit subsystem is one such special case; it includes (arch-specific) +functions that classify some special types of system call -- specifically +file open (``open``/``openat``), program execution (``execve``/``exeveat``) or +socket multiplexor (``socketcall``) operations. If your new system call is +analogous to one of these, then the audit system should be updated. + +More generally, if there is an existing system call that is analogous to your +new system call, it's worth doing a kernel-wide grep for the existing system +call to check there are no other special cases. + + +Testing +------- + +A new system call should obviously be tested; it is also useful to provide +reviewers with a demonstration of how user space programs will use the system +call. A good way to combine these aims is to include a simple self-test +program in a new directory under ``tools/testing/selftests/``. + +For a new system call, there will obviously be no libc wrapper function and so +the test will need to invoke it using ``syscall()``; also, if the system call +involves a new userspace-visible structure, the corresponding header will need +to be installed to compile the test. + +Make sure the selftest runs successfully on all supported architectures. For +example, check that it works when compiled as an x86_64 (-m64), x86_32 (-m32) +and x32 (-mx32) ABI program. + +For more extensive and thorough testing of new functionality, you should also +consider adding tests to the Linux Test Project, or to the xfstests project +for filesystem-related changes. + + - https://linux-test-project.github.io/ + - git://git.kernel.org/pub/scm/fs/xfs/xfstests-dev.git + + +Man Page +-------- + +All new system calls should come with a complete man page, ideally using groff +markup, but plain text will do. If groff is used, it's helpful to include a +pre-rendered ASCII version of the man page in the cover email for the +patchset, for the convenience of reviewers. + +The man page should be cc'ed to linux-man@vger.kernel.org +For more details, see https://www.kernel.org/doc/man-pages/patches.html + + +Do not call System Calls in the Kernel +-------------------------------------- + +System calls are, as stated above, interaction points between userspace and +the kernel. Therefore, system call functions such as ``sys_xyzzy()`` or +``compat_sys_xyzzy()`` should only be called from userspace via the syscall +table, but not from elsewhere in the kernel. If the syscall functionality is +useful to be used within the kernel, needs to be shared between an old and a +new syscall, or needs to be shared between a syscall and its compatibility +variant, it should be implemented by means of a "helper" function (such as +``kern_xyzzy()``). This kernel function may then be called within the +syscall stub (``sys_xyzzy()``), the compatibility syscall stub +(``compat_sys_xyzzy()``), and/or other kernel code. + +At least on 64-bit x86, it will be a hard requirement from v4.17 onwards to not +call system call functions in the kernel. It uses a different calling +convention for system calls where ``struct pt_regs`` is decoded on-the-fly in a +syscall wrapper which then hands processing over to the actual syscall function. +This means that only those parameters which are actually needed for a specific +syscall are passed on during syscall entry, instead of filling in six CPU +registers with random user space content all the time (which may cause serious +trouble down the call chain). + +Moreover, rules on how data may be accessed may differ between kernel data and +user data. This is another reason why calling ``sys_xyzzy()`` is generally a +bad idea. + +Exceptions to this rule are only allowed in architecture-specific overrides, +architecture-specific compatibility wrappers, or other code in arch/. + + +References and Sources +---------------------- + + - LWN article from Michael Kerrisk on use of flags argument in system calls: + https://lwn.net/Articles/585415/ + - LWN article from Michael Kerrisk on how to handle unknown flags in a system + call: https://lwn.net/Articles/588444/ + - LWN article from Jake Edge describing constraints on 64-bit system call + arguments: https://lwn.net/Articles/311630/ + - Pair of LWN articles from David Drysdale that describe the system call + implementation paths in detail for v3.14: + + - https://lwn.net/Articles/604287/ + - https://lwn.net/Articles/604515/ + + - Architecture-specific requirements for system calls are discussed in the + :manpage:`syscall(2)` man-page: + http://man7.org/linux/man-pages/man2/syscall.2.html#NOTES + - Collated emails from Linus Torvalds discussing the problems with ``ioctl()``: + http://yarchive.net/comp/linux/ioctl.html + - "How to not invent kernel interfaces", Arnd Bergmann, + http://www.ukuug.org/events/linux2007/2007/papers/Bergmann.pdf + - LWN article from Michael Kerrisk on avoiding new uses of CAP_SYS_ADMIN: + https://lwn.net/Articles/486306/ + - Recommendation from Andrew Morton that all related information for a new + system call should come in the same email thread: + https://lkml.org/lkml/2014/7/24/641 + - Recommendation from Michael Kerrisk that a new system call should come with + a man page: https://lkml.org/lkml/2014/6/13/309 + - Suggestion from Thomas Gleixner that x86 wire-up should be in a separate + commit: https://lkml.org/lkml/2014/11/19/254 + - Suggestion from Greg Kroah-Hartman that it's good for new system calls to + come with a man-page & selftest: https://lkml.org/lkml/2014/3/19/710 + - Discussion from Michael Kerrisk of new system call vs. :manpage:`prctl(2)` extension: + https://lkml.org/lkml/2014/6/3/411 + - Suggestion from Ingo Molnar that system calls that involve multiple + arguments should encapsulate those arguments in a struct, which includes a + size field for future extensibility: https://lkml.org/lkml/2015/7/30/117 + - Numbering oddities arising from (re-)use of O_* numbering space flags: + + - commit 75069f2b5bfb ("vfs: renumber FMODE_NONOTIFY and add to uniqueness + check") + - commit 12ed2e36c98a ("fanotify: FMODE_NONOTIFY and __O_SYNC in sparc + conflict") + - commit bb458c644a59 ("Safer ABI for O_TMPFILE") + + - Discussion from Matthew Wilcox about restrictions on 64-bit arguments: + https://lkml.org/lkml/2008/12/12/187 + - Recommendation from Greg Kroah-Hartman that unknown flags should be + policed: https://lkml.org/lkml/2014/7/17/577 + - Recommendation from Linus Torvalds that x32 system calls should prefer + compatibility with 64-bit versions rather than 32-bit versions: + https://lkml.org/lkml/2011/8/31/244 diff --git a/Documentation/process/applying-patches.rst b/Documentation/process/applying-patches.rst new file mode 100644 index 000000000..dc2ddc345 --- /dev/null +++ b/Documentation/process/applying-patches.rst @@ -0,0 +1,421 @@ +.. _applying_patches: + +Applying Patches To The Linux Kernel +++++++++++++++++++++++++++++++++++++ + +Original by: + Jesper Juhl, August 2005 + +.. note:: + + This document is obsolete. In most cases, rather than using ``patch`` + manually, you'll almost certainly want to look at using Git instead. + +A frequently asked question on the Linux Kernel Mailing List is how to apply +a patch to the kernel or, more specifically, what base kernel a patch for +one of the many trees/branches should be applied to. Hopefully this document +will explain this to you. + +In addition to explaining how to apply and revert patches, a brief +description of the different kernel trees (and examples of how to apply +their specific patches) is also provided. + + +What is a patch? +================ + +A patch is a small text document containing a delta of changes between two +different versions of a source tree. Patches are created with the ``diff`` +program. + +To correctly apply a patch you need to know what base it was generated from +and what new version the patch will change the source tree into. These +should both be present in the patch file metadata or be possible to deduce +from the filename. + + +How do I apply or revert a patch? +================================= + +You apply a patch with the ``patch`` program. The patch program reads a diff +(or patch) file and makes the changes to the source tree described in it. + +Patches for the Linux kernel are generated relative to the parent directory +holding the kernel source dir. + +This means that paths to files inside the patch file contain the name of the +kernel source directories it was generated against (or some other directory +names like "a/" and "b/"). + +Since this is unlikely to match the name of the kernel source dir on your +local machine (but is often useful info to see what version an otherwise +unlabeled patch was generated against) you should change into your kernel +source directory and then strip the first element of the path from filenames +in the patch file when applying it (the ``-p1`` argument to ``patch`` does +this). + +To revert a previously applied patch, use the -R argument to patch. +So, if you applied a patch like this:: + + patch -p1 < ../patch-x.y.z + +You can revert (undo) it like this:: + + patch -R -p1 < ../patch-x.y.z + + +How do I feed a patch/diff file to ``patch``? +============================================= + +This (as usual with Linux and other UNIX like operating systems) can be +done in several different ways. + +In all the examples below I feed the file (in uncompressed form) to patch +via stdin using the following syntax:: + + patch -p1 < path/to/patch-x.y.z + +If you just want to be able to follow the examples below and don't want to +know of more than one way to use patch, then you can stop reading this +section here. + +Patch can also get the name of the file to use via the -i argument, like +this:: + + patch -p1 -i path/to/patch-x.y.z + +If your patch file is compressed with gzip or xz and you don't want to +uncompress it before applying it, then you can feed it to patch like this +instead:: + + xzcat path/to/patch-x.y.z.xz | patch -p1 + bzcat path/to/patch-x.y.z.gz | patch -p1 + +If you wish to uncompress the patch file by hand first before applying it +(what I assume you've done in the examples below), then you simply run +gunzip or xz on the file -- like this:: + + gunzip patch-x.y.z.gz + xz -d patch-x.y.z.xz + +Which will leave you with a plain text patch-x.y.z file that you can feed to +patch via stdin or the ``-i`` argument, as you prefer. + +A few other nice arguments for patch are ``-s`` which causes patch to be silent +except for errors which is nice to prevent errors from scrolling out of the +screen too fast, and ``--dry-run`` which causes patch to just print a listing of +what would happen, but doesn't actually make any changes. Finally ``--verbose`` +tells patch to print more information about the work being done. + + +Common errors when patching +=========================== + +When patch applies a patch file it attempts to verify the sanity of the +file in different ways. + +Checking that the file looks like a valid patch file and checking the code +around the bits being modified matches the context provided in the patch are +just two of the basic sanity checks patch does. + +If patch encounters something that doesn't look quite right it has two +options. It can either refuse to apply the changes and abort or it can try +to find a way to make the patch apply with a few minor changes. + +One example of something that's not 'quite right' that patch will attempt to +fix up is if all the context matches, the lines being changed match, but the +line numbers are different. This can happen, for example, if the patch makes +a change in the middle of the file but for some reasons a few lines have +been added or removed near the beginning of the file. In that case +everything looks good it has just moved up or down a bit, and patch will +usually adjust the line numbers and apply the patch. + +Whenever patch applies a patch that it had to modify a bit to make it fit +it'll tell you about it by saying the patch applied with **fuzz**. +You should be wary of such changes since even though patch probably got it +right it doesn't /always/ get it right, and the result will sometimes be +wrong. + +When patch encounters a change that it can't fix up with fuzz it rejects it +outright and leaves a file with a ``.rej`` extension (a reject file). You can +read this file to see exactly what change couldn't be applied, so you can +go fix it up by hand if you wish. + +If you don't have any third-party patches applied to your kernel source, but +only patches from kernel.org and you apply the patches in the correct order, +and have made no modifications yourself to the source files, then you should +never see a fuzz or reject message from patch. If you do see such messages +anyway, then there's a high risk that either your local source tree or the +patch file is corrupted in some way. In that case you should probably try +re-downloading the patch and if things are still not OK then you'd be advised +to start with a fresh tree downloaded in full from kernel.org. + +Let's look a bit more at some of the messages patch can produce. + +If patch stops and presents a ``File to patch:`` prompt, then patch could not +find a file to be patched. Most likely you forgot to specify -p1 or you are +in the wrong directory. Less often, you'll find patches that need to be +applied with ``-p0`` instead of ``-p1`` (reading the patch file should reveal if +this is the case -- if so, then this is an error by the person who created +the patch but is not fatal). + +If you get ``Hunk #2 succeeded at 1887 with fuzz 2 (offset 7 lines).`` or a +message similar to that, then it means that patch had to adjust the location +of the change (in this example it needed to move 7 lines from where it +expected to make the change to make it fit). + +The resulting file may or may not be OK, depending on the reason the file +was different than expected. + +This often happens if you try to apply a patch that was generated against a +different kernel version than the one you are trying to patch. + +If you get a message like ``Hunk #3 FAILED at 2387.``, then it means that the +patch could not be applied correctly and the patch program was unable to +fuzz its way through. This will generate a ``.rej`` file with the change that +caused the patch to fail and also a ``.orig`` file showing you the original +content that couldn't be changed. + +If you get ``Reversed (or previously applied) patch detected! Assume -R? [n]`` +then patch detected that the change contained in the patch seems to have +already been made. + +If you actually did apply this patch previously and you just re-applied it +in error, then just say [n]o and abort this patch. If you applied this patch +previously and actually intended to revert it, but forgot to specify -R, +then you can say [**y**]es here to make patch revert it for you. + +This can also happen if the creator of the patch reversed the source and +destination directories when creating the patch, and in that case reverting +the patch will in fact apply it. + +A message similar to ``patch: **** unexpected end of file in patch`` or +``patch unexpectedly ends in middle of line`` means that patch could make no +sense of the file you fed to it. Either your download is broken, you tried to +feed patch a compressed patch file without uncompressing it first, or the patch +file that you are using has been mangled by a mail client or mail transfer +agent along the way somewhere, e.g., by splitting a long line into two lines. +Often these warnings can easily be fixed by joining (concatenating) the +two lines that had been split. + +As I already mentioned above, these errors should never happen if you apply +a patch from kernel.org to the correct version of an unmodified source tree. +So if you get these errors with kernel.org patches then you should probably +assume that either your patch file or your tree is broken and I'd advise you +to start over with a fresh download of a full kernel tree and the patch you +wish to apply. + + +Are there any alternatives to ``patch``? +======================================== + + +Yes there are alternatives. + +You can use the ``interdiff`` program (http://cyberelk.net/tim/patchutils/) to +generate a patch representing the differences between two patches and then +apply the result. + +This will let you move from something like 4.7.2 to 4.7.3 in a single +step. The -z flag to interdiff will even let you feed it patches in gzip or +bzip2 compressed form directly without the use of zcat or bzcat or manual +decompression. + +Here's how you'd go from 4.7.2 to 4.7.3 in a single step:: + + interdiff -z ../patch-4.7.2.gz ../patch-4.7.3.gz | patch -p1 + +Although interdiff may save you a step or two you are generally advised to +do the additional steps since interdiff can get things wrong in some cases. + +Another alternative is ``ketchup``, which is a python script for automatic +downloading and applying of patches (http://www.selenic.com/ketchup/). + +Other nice tools are diffstat, which shows a summary of changes made by a +patch; lsdiff, which displays a short listing of affected files in a patch +file, along with (optionally) the line numbers of the start of each patch; +and grepdiff, which displays a list of the files modified by a patch where +the patch contains a given regular expression. + + +Where can I download the patches? +================================= + +The patches are available at http://kernel.org/ +Most recent patches are linked from the front page, but they also have +specific homes. + +The 4.x.y (-stable) and 4.x patches live at + + https://www.kernel.org/pub/linux/kernel/v4.x/ + +The -rc patches live at + + https://www.kernel.org/pub/linux/kernel/v4.x/testing/ + + +The 4.x kernels +=============== + +These are the base stable releases released by Linus. The highest numbered +release is the most recent. + +If regressions or other serious flaws are found, then a -stable fix patch +will be released (see below) on top of this base. Once a new 4.x base +kernel is released, a patch is made available that is a delta between the +previous 4.x kernel and the new one. + +To apply a patch moving from 4.6 to 4.7, you'd do the following (note +that such patches do **NOT** apply on top of 4.x.y kernels but on top of the +base 4.x kernel -- if you need to move from 4.x.y to 4.x+1 you need to +first revert the 4.x.y patch). + +Here are some examples:: + + # moving from 4.6 to 4.7 + + $ cd ~/linux-4.6 # change to kernel source dir + $ patch -p1 < ../patch-4.7 # apply the 4.7 patch + $ cd .. + $ mv linux-4.6 linux-4.7 # rename source dir + + # moving from 4.6.1 to 4.7 + + $ cd ~/linux-4.6.1 # change to kernel source dir + $ patch -p1 -R < ../patch-4.6.1 # revert the 4.6.1 patch + # source dir is now 4.6 + $ patch -p1 < ../patch-4.7 # apply new 4.7 patch + $ cd .. + $ mv linux-4.6.1 linux-4.7 # rename source dir + + +The 4.x.y kernels +================= + +Kernels with 3-digit versions are -stable kernels. They contain small(ish) +critical fixes for security problems or significant regressions discovered +in a given 4.x kernel. + +This is the recommended branch for users who want the most recent stable +kernel and are not interested in helping test development/experimental +versions. + +If no 4.x.y kernel is available, then the highest numbered 4.x kernel is +the current stable kernel. + +.. note:: + + The -stable team usually do make incremental patches available as well + as patches against the latest mainline release, but I only cover the + non-incremental ones below. The incremental ones can be found at + https://www.kernel.org/pub/linux/kernel/v4.x/incr/ + +These patches are not incremental, meaning that for example the 4.7.3 +patch does not apply on top of the 4.7.2 kernel source, but rather on top +of the base 4.7 kernel source. + +So, in order to apply the 4.7.3 patch to your existing 4.7.2 kernel +source you have to first back out the 4.7.2 patch (so you are left with a +base 4.7 kernel source) and then apply the new 4.7.3 patch. + +Here's a small example:: + + $ cd ~/linux-4.7.2 # change to the kernel source dir + $ patch -p1 -R < ../patch-4.7.2 # revert the 4.7.2 patch + $ patch -p1 < ../patch-4.7.3 # apply the new 4.7.3 patch + $ cd .. + $ mv linux-4.7.2 linux-4.7.3 # rename the kernel source dir + +The -rc kernels +=============== + +These are release-candidate kernels. These are development kernels released +by Linus whenever he deems the current git (the kernel's source management +tool) tree to be in a reasonably sane state adequate for testing. + +These kernels are not stable and you should expect occasional breakage if +you intend to run them. This is however the most stable of the main +development branches and is also what will eventually turn into the next +stable kernel, so it is important that it be tested by as many people as +possible. + +This is a good branch to run for people who want to help out testing +development kernels but do not want to run some of the really experimental +stuff (such people should see the sections about -next and -mm kernels below). + +The -rc patches are not incremental, they apply to a base 4.x kernel, just +like the 4.x.y patches described above. The kernel version before the -rcN +suffix denotes the version of the kernel that this -rc kernel will eventually +turn into. + +So, 4.8-rc5 means that this is the fifth release candidate for the 4.8 +kernel and the patch should be applied on top of the 4.7 kernel source. + +Here are 3 examples of how to apply these patches:: + + # first an example of moving from 4.7 to 4.8-rc3 + + $ cd ~/linux-4.7 # change to the 4.7 source dir + $ patch -p1 < ../patch-4.8-rc3 # apply the 4.8-rc3 patch + $ cd .. + $ mv linux-4.7 linux-4.8-rc3 # rename the source dir + + # now let's move from 4.8-rc3 to 4.8-rc5 + + $ cd ~/linux-4.8-rc3 # change to the 4.8-rc3 dir + $ patch -p1 -R < ../patch-4.8-rc3 # revert the 4.8-rc3 patch + $ patch -p1 < ../patch-4.8-rc5 # apply the new 4.8-rc5 patch + $ cd .. + $ mv linux-4.8-rc3 linux-4.8-rc5 # rename the source dir + + # finally let's try and move from 4.7.3 to 4.8-rc5 + + $ cd ~/linux-4.7.3 # change to the kernel source dir + $ patch -p1 -R < ../patch-4.7.3 # revert the 4.7.3 patch + $ patch -p1 < ../patch-4.8-rc5 # apply new 4.8-rc5 patch + $ cd .. + $ mv linux-4.7.3 linux-4.8-rc5 # rename the kernel source dir + + +The -mm patches and the linux-next tree +======================================= + +The -mm patches are experimental patches released by Andrew Morton. + +In the past, -mm tree were used to also test subsystem patches, but this +function is now done via the +`linux-next <https://www.kernel.org/doc/man-pages/linux-next.html>` +tree. The Subsystem maintainers push their patches first to linux-next, +and, during the merge window, sends them directly to Linus. + +The -mm patches serve as a sort of proving ground for new features and other +experimental patches that aren't merged via a subsystem tree. +Once such patches has proved its worth in -mm for a while Andrew pushes +it on to Linus for inclusion in mainline. + +The linux-next tree is daily updated, and includes the -mm patches. +Both are in constant flux and contains many experimental features, a +lot of debugging patches not appropriate for mainline etc., and is the most +experimental of the branches described in this document. + +These patches are not appropriate for use on systems that are supposed to be +stable and they are more risky to run than any of the other branches (make +sure you have up-to-date backups -- that goes for any experimental kernel but +even more so for -mm patches or using a Kernel from the linux-next tree). + +Testing of -mm patches and linux-next is greatly appreciated since the whole +point of those are to weed out regressions, crashes, data corruption bugs, +build breakage (and any other bug in general) before changes are merged into +the more stable mainline Linus tree. + +But testers of -mm and linux-next should be aware that breakages are +more common than in any other tree. + + +This concludes this list of explanations of the various kernel trees. +I hope you are now clear on how to apply the various patches and help testing +the kernel. + +Thank you's to Randy Dunlap, Rolf Eike Beer, Linus Torvalds, Bodo Eggert, +Johannes Stezenbach, Grant Coady, Pavel Machek and others that I may have +forgotten for their reviews and contributions to this document. diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst new file mode 100644 index 000000000..d1bf143b4 --- /dev/null +++ b/Documentation/process/changes.rst @@ -0,0 +1,487 @@ +.. _changes: + +Minimal requirements to compile the Kernel +++++++++++++++++++++++++++++++++++++++++++ + +Intro +===== + +This document is designed to provide a list of the minimum levels of +software necessary to run the 4.x kernels. + +This document is originally based on my "Changes" file for 2.0.x kernels +and therefore owes credit to the same people as that file (Jared Mauch, +Axel Boldt, Alessandro Sigala, and countless other users all over the +'net). + +Current Minimal Requirements +**************************** + +Upgrade to at **least** these software revisions before thinking you've +encountered a bug! If you're unsure what version you're currently +running, the suggested command should tell you. + +Again, keep in mind that this list assumes you are already functionally +running a Linux kernel. Also, not all tools are necessary on all +systems; obviously, if you don't have any ISDN hardware, for example, +you probably needn't concern yourself with isdn4k-utils. + +====================== =============== ======================================== + Program Minimal version Command to check the version +====================== =============== ======================================== +GNU C 4.6 gcc --version +GNU make 3.81 make --version +binutils 2.20 ld -v +flex 2.5.35 flex --version +bison 2.0 bison --version +util-linux 2.10o fdformat --version +kmod 13 depmod -V +e2fsprogs 1.41.4 e2fsck -V +jfsutils 1.1.3 fsck.jfs -V +reiserfsprogs 3.6.3 reiserfsck -V +xfsprogs 2.6.0 xfs_db -V +squashfs-tools 4.0 mksquashfs -version +btrfs-progs 0.18 btrfsck +pcmciautils 004 pccardctl -V +quota-tools 3.09 quota -V +PPP 2.4.0 pppd --version +isdn4k-utils 3.1pre1 isdnctrl 2>&1|grep version +nfs-utils 1.0.5 showmount --version +procps 3.2.0 ps --version +oprofile 0.9 oprofiled --version +udev 081 udevd --version +grub 0.93 grub --version || grub-install --version +mcelog 0.6 mcelog --version +iptables 1.4.2 iptables -V +openssl & libcrypto 1.0.0 openssl version +bc 1.06.95 bc --version +Sphinx\ [#f1]_ 1.3 sphinx-build --version +====================== =============== ======================================== + +.. [#f1] Sphinx is needed only to build the Kernel documentation + +Kernel compilation +****************** + +GCC +--- + +The gcc version requirements may vary depending on the type of CPU in your +computer. + +Make +---- + +You will need GNU make 3.81 or later to build the kernel. + +Binutils +-------- + +The build system has, as of 4.13, switched to using thin archives (`ar T`) +rather than incremental linking (`ld -r`) for built-in.a intermediate steps. +This requires binutils 2.20 or newer. + +pkg-config +---------- + +The build system, as of 4.18, requires pkg-config to check for installed +kconfig tools and to determine flags settings for use in +'make {g,x}config'. Previously pkg-config was being used but not +verified or documented. + +Flex +---- + +Since Linux 4.16, the build system generates lexical analyzers +during build. This requires flex 2.5.35 or later. + + +Bison +----- + +Since Linux 4.16, the build system generates parsers +during build. This requires bison 2.0 or later. + +Perl +---- + +You will need perl 5 and the following modules: ``Getopt::Long``, +``Getopt::Std``, ``File::Basename``, and ``File::Find`` to build the kernel. + +BC +-- + +You will need bc to build kernels 3.10 and higher + + +OpenSSL +------- + +Module signing and external certificate handling use the OpenSSL program and +crypto library to do key creation and signature generation. + +You will need openssl to build kernels 3.7 and higher if module signing is +enabled. You will also need openssl development packages to build kernels 4.3 +and higher. + + +System utilities +**************** + +Architectural changes +--------------------- + +DevFS has been obsoleted in favour of udev +(http://www.kernel.org/pub/linux/utils/kernel/hotplug/) + +32-bit UID support is now in place. Have fun! + +Linux documentation for functions is transitioning to inline +documentation via specially-formatted comments near their +definitions in the source. These comments can be combined with ReST +files the Documentation/ directory to make enriched documentation, which can +then be converted to PostScript, HTML, LaTex, ePUB and PDF files. +In order to convert from ReST format to a format of your choice, you'll need +Sphinx. + +Util-linux +---------- + +New versions of util-linux provide ``fdisk`` support for larger disks, +support new options to mount, recognize more supported partition +types, have a fdformat which works with 2.4 kernels, and similar goodies. +You'll probably want to upgrade. + +Ksymoops +-------- + +If the unthinkable happens and your kernel oopses, you may need the +ksymoops tool to decode it, but in most cases you don't. +It is generally preferred to build the kernel with ``CONFIG_KALLSYMS`` so +that it produces readable dumps that can be used as-is (this also +produces better output than ksymoops). If for some reason your kernel +is not build with ``CONFIG_KALLSYMS`` and you have no way to rebuild and +reproduce the Oops with that option, then you can still decode that Oops +with ksymoops. + +Mkinitrd +-------- + +These changes to the ``/lib/modules`` file tree layout also require that +mkinitrd be upgraded. + +E2fsprogs +--------- + +The latest version of ``e2fsprogs`` fixes several bugs in fsck and +debugfs. Obviously, it's a good idea to upgrade. + +JFSutils +-------- + +The ``jfsutils`` package contains the utilities for the file system. +The following utilities are available: + +- ``fsck.jfs`` - initiate replay of the transaction log, and check + and repair a JFS formatted partition. + +- ``mkfs.jfs`` - create a JFS formatted partition. + +- other file system utilities are also available in this package. + +Reiserfsprogs +------------- + +The reiserfsprogs package should be used for reiserfs-3.6.x +(Linux kernels 2.4.x). It is a combined package and contains working +versions of ``mkreiserfs``, ``resize_reiserfs``, ``debugreiserfs`` and +``reiserfsck``. These utils work on both i386 and alpha platforms. + +Xfsprogs +-------- + +The latest version of ``xfsprogs`` contains ``mkfs.xfs``, ``xfs_db``, and the +``xfs_repair`` utilities, among others, for the XFS filesystem. It is +architecture independent and any version from 2.0.0 onward should +work correctly with this version of the XFS kernel code (2.6.0 or +later is recommended, due to some significant improvements). + +PCMCIAutils +----------- + +PCMCIAutils replaces ``pcmcia-cs``. It properly sets up +PCMCIA sockets at system startup and loads the appropriate modules +for 16-bit PCMCIA devices if the kernel is modularized and the hotplug +subsystem is used. + +Quota-tools +----------- + +Support for 32 bit uid's and gid's is required if you want to use +the newer version 2 quota format. Quota-tools version 3.07 and +newer has this support. Use the recommended version or newer +from the table above. + +Intel IA32 microcode +-------------------- + +A driver has been added to allow updating of Intel IA32 microcode, +accessible as a normal (misc) character device. If you are not using +udev you may need to:: + + mkdir /dev/cpu + mknod /dev/cpu/microcode c 10 184 + chmod 0644 /dev/cpu/microcode + +as root before you can use this. You'll probably also want to +get the user-space microcode_ctl utility to use with this. + +udev +---- + +``udev`` is a userspace application for populating ``/dev`` dynamically with +only entries for devices actually present. ``udev`` replaces the basic +functionality of devfs, while allowing persistent device naming for +devices. + +FUSE +---- + +Needs libfuse 2.4.0 or later. Absolute minimum is 2.3.0 but mount +options ``direct_io`` and ``kernel_cache`` won't work. + +Networking +********** + +General changes +--------------- + +If you have advanced network configuration needs, you should probably +consider using the network tools from ip-route2. + +Packet Filter / NAT +------------------- +The packet filtering and NAT code uses the same tools like the previous 2.4.x +kernel series (iptables). It still includes backwards-compatibility modules +for 2.2.x-style ipchains and 2.0.x-style ipfwadm. + +PPP +--- + +The PPP driver has been restructured to support multilink and to +enable it to operate over diverse media layers. If you use PPP, +upgrade pppd to at least 2.4.0. + +If you are not using udev, you must have the device file /dev/ppp +which can be made by:: + + mknod /dev/ppp c 108 0 + +as root. + +Isdn4k-utils +------------ + +Due to changes in the length of the phone number field, isdn4k-utils +needs to be recompiled or (preferably) upgraded. + +NFS-utils +--------- + +In ancient (2.4 and earlier) kernels, the nfs server needed to know +about any client that expected to be able to access files via NFS. This +information would be given to the kernel by ``mountd`` when the client +mounted the filesystem, or by ``exportfs`` at system startup. exportfs +would take information about active clients from ``/var/lib/nfs/rmtab``. + +This approach is quite fragile as it depends on rmtab being correct +which is not always easy, particularly when trying to implement +fail-over. Even when the system is working well, ``rmtab`` suffers from +getting lots of old entries that never get removed. + +With modern kernels we have the option of having the kernel tell mountd +when it gets a request from an unknown host, and mountd can give +appropriate export information to the kernel. This removes the +dependency on ``rmtab`` and means that the kernel only needs to know about +currently active clients. + +To enable this new functionality, you need to:: + + mount -t nfsd nfsd /proc/fs/nfsd + +before running exportfs or mountd. It is recommended that all NFS +services be protected from the internet-at-large by a firewall where +that is possible. + +mcelog +------ + +On x86 kernels the mcelog utility is needed to process and log machine check +events when ``CONFIG_X86_MCE`` is enabled. Machine check events are errors +reported by the CPU. Processing them is strongly encouraged. + +Kernel documentation +******************** + +Sphinx +------ + +Please see :ref:`sphinx_install` in ``Documentation/doc-guide/sphinx.rst`` +for details about Sphinx requirements. + +Getting updated software +======================== + +Kernel compilation +****************** + +gcc +--- + +- <ftp://ftp.gnu.org/gnu/gcc/> + +Make +---- + +- <ftp://ftp.gnu.org/gnu/make/> + +Binutils +-------- + +- <https://www.kernel.org/pub/linux/devel/binutils/> + +Flex +---- + +- <https://github.com/westes/flex/releases> + +Bison +----- + +- <ftp://ftp.gnu.org/gnu/bison/> + +OpenSSL +------- + +- <https://www.openssl.org/> + +System utilities +**************** + +Util-linux +---------- + +- <https://www.kernel.org/pub/linux/utils/util-linux/> + +Kmod +---- + +- <https://www.kernel.org/pub/linux/utils/kernel/kmod/> +- <https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git> + +Ksymoops +-------- + +- <https://www.kernel.org/pub/linux/utils/kernel/ksymoops/v2.4/> + +Mkinitrd +-------- + +- <https://code.launchpad.net/initrd-tools/main> + +E2fsprogs +--------- + +- <http://prdownloads.sourceforge.net/e2fsprogs/e2fsprogs-1.29.tar.gz> + +JFSutils +-------- + +- <http://jfs.sourceforge.net/> + +Reiserfsprogs +------------- + +- <http://www.kernel.org/pub/linux/utils/fs/reiserfs/> + +Xfsprogs +-------- + +- <ftp://oss.sgi.com/projects/xfs/> + +Pcmciautils +----------- + +- <https://www.kernel.org/pub/linux/utils/kernel/pcmcia/> + +Quota-tools +----------- + +- <http://sourceforge.net/projects/linuxquota/> + + +Intel P6 microcode +------------------ + +- <https://downloadcenter.intel.com/> + +udev +---- + +- <http://www.freedesktop.org/software/systemd/man/udev.html> + +FUSE +---- + +- <https://github.com/libfuse/libfuse/releases> + +mcelog +------ + +- <http://www.mcelog.org/> + +Networking +********** + +PPP +--- + +- <ftp://ftp.samba.org/pub/ppp/> + +Isdn4k-utils +------------ + +- <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/> + +NFS-utils +--------- + +- <http://sourceforge.net/project/showfiles.php?group_id=14> + +Iptables +-------- + +- <http://www.iptables.org/downloads.html> + +Ip-route2 +--------- + +- <https://www.kernel.org/pub/linux/utils/net/iproute2/> + +OProfile +-------- + +- <http://oprofile.sf.net/download/> + +NFS-Utils +--------- + +- <http://nfs.sourceforge.net/> + +Kernel documentation +******************** + +Sphinx +------ + +- <http://www.sphinx-doc.org/> diff --git a/Documentation/process/clang-format.rst b/Documentation/process/clang-format.rst new file mode 100644 index 000000000..6710c0707 --- /dev/null +++ b/Documentation/process/clang-format.rst @@ -0,0 +1,184 @@ +.. _clangformat: + +clang-format +============ + +``clang-format`` is a tool to format C/C++/... code according to +a set of rules and heuristics. Like most tools, it is not perfect +nor covers every single case, but it is good enough to be helpful. + +``clang-format`` can be used for several purposes: + + - Quickly reformat a block of code to the kernel style. Specially useful + when moving code around and aligning/sorting. See clangformatreformat_. + + - Spot style mistakes, typos and possible improvements in files + you maintain, patches you review, diffs, etc. See clangformatreview_. + + - Help you follow the coding style rules, specially useful for those + new to kernel development or working at the same time in several + projects with different coding styles. + +Its configuration file is ``.clang-format`` in the root of the kernel tree. +The rules contained there try to approximate the most common kernel +coding style. They also try to follow :ref:`Documentation/process/coding-style.rst <codingstyle>` +as much as possible. Since not all the kernel follows the same style, +it is possible that you may want to tweak the defaults for a particular +subsystem or folder. To do so, you can override the defaults by writing +another ``.clang-format`` file in a subfolder. + +The tool itself has already been included in the repositories of popular +Linux distributions for a long time. Search for ``clang-format`` in +your repositories. Otherwise, you can either download pre-built +LLVM/clang binaries or build the source code from: + + http://releases.llvm.org/download.html + +See more information about the tool at: + + https://clang.llvm.org/docs/ClangFormat.html + + https://clang.llvm.org/docs/ClangFormatStyleOptions.html + + +.. _clangformatreview: + +Review files and patches for coding style +----------------------------------------- + +By running the tool in its inline mode, you can review full subsystems, +folders or individual files for code style mistakes, typos or improvements. + +To do so, you can run something like:: + + # Make sure your working directory is clean! + clang-format -i kernel/*.[ch] + +And then take a look at the git diff. + +Counting the lines of such a diff is also useful for improving/tweaking +the style options in the configuration file; as well as testing new +``clang-format`` features/versions. + +``clang-format`` also supports reading unified diffs, so you can review +patches and git diffs easily. See the documentation at: + + https://clang.llvm.org/docs/ClangFormat.html#script-for-patch-reformatting + +To avoid ``clang-format`` formatting some portion of a file, you can do:: + + int formatted_code; + // clang-format off + void unformatted_code ; + // clang-format on + void formatted_code_again; + +While it might be tempting to use this to keep a file always in sync with +``clang-format``, specially if you are writing new files or if you are +a maintainer, please note that people might be running different +``clang-format`` versions or not have it available at all. Therefore, +you should probably refrain yourself from using this in kernel sources; +at least until we see if ``clang-format`` becomes commonplace. + + +.. _clangformatreformat: + +Reformatting blocks of code +--------------------------- + +By using an integration with your text editor, you can reformat arbitrary +blocks (selections) of code with a single keystroke. This is specially +useful when moving code around, for complex code that is deeply intended, +for multi-line macros (and aligning their backslashes), etc. + +Remember that you can always tweak the changes afterwards in those cases +where the tool did not do an optimal job. But as a first approximation, +it can be very useful. + +There are integrations for many popular text editors. For some of them, +like vim, emacs, BBEdit and Visual Studio you can find support built-in. +For instructions, read the appropiate section at: + + https://clang.llvm.org/docs/ClangFormat.html + +For Atom, Eclipse, Sublime Text, Visual Studio Code, XCode and other +editors and IDEs you should be able to find ready-to-use plugins. + +For this use case, consider using a secondary ``.clang-format`` +so that you can tweak a few options. See clangformatextra_. + + +.. _clangformatmissing: + +Missing support +--------------- + +``clang-format`` is missing support for some things that are common +in kernel code. They are easy to remember, so if you use the tool +regularly, you will quickly learn to avoid/ignore those. + +In particular, some very common ones you will notice are: + + - Aligned blocks of one-line ``#defines``, e.g.:: + + #define TRACING_MAP_BITS_DEFAULT 11 + #define TRACING_MAP_BITS_MAX 17 + #define TRACING_MAP_BITS_MIN 7 + + vs.:: + + #define TRACING_MAP_BITS_DEFAULT 11 + #define TRACING_MAP_BITS_MAX 17 + #define TRACING_MAP_BITS_MIN 7 + + - Aligned designated initializers, e.g.:: + + static const struct file_operations uprobe_events_ops = { + .owner = THIS_MODULE, + .open = probes_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, + .write = probes_write, + }; + + vs.:: + + static const struct file_operations uprobe_events_ops = { + .owner = THIS_MODULE, + .open = probes_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, + .write = probes_write, + }; + + +.. _clangformatextra: + +Extra features/options +---------------------- + +Some features/style options are not enabled by default in the configuration +file in order to minimize the differences between the output and the current +code. In other words, to make the difference as small as possible, +which makes reviewing full-file style, as well diffs and patches as easy +as possible. + +In other cases (e.g. particular subsystems/folders/files), the kernel style +might be different and enabling some of these options may approximate +better the style there. + +For instance: + + - Aligning assignments (``AlignConsecutiveAssignments``). + + - Aligning declarations (``AlignConsecutiveDeclarations``). + + - Reflowing text in comments (``ReflowComments``). + + - Sorting ``#includes`` (``SortIncludes``). + +They are typically useful for block re-formatting, rather than full-file. +You might want to create another ``.clang-format`` file and use that one +from your editor/IDE instead. diff --git a/Documentation/process/code-of-conduct-interpretation.rst b/Documentation/process/code-of-conduct-interpretation.rst new file mode 100644 index 000000000..e899f14a4 --- /dev/null +++ b/Documentation/process/code-of-conduct-interpretation.rst @@ -0,0 +1,156 @@ +.. _code_of_conduct_interpretation: + +Linux Kernel Contributor Covenant Code of Conduct Interpretation +================================================================ + +The :ref:`code_of_conduct` is a general document meant to +provide a set of rules for almost any open source community. Every +open-source community is unique and the Linux kernel is no exception. +Because of this, this document describes how we in the Linux kernel +community will interpret it. We also do not expect this interpretation +to be static over time, and will adjust it as needed. + +The Linux kernel development effort is a very personal process compared +to "traditional" ways of developing software. Your contributions and +ideas behind them will be carefully reviewed, often resulting in +critique and criticism. The review will almost always require +improvements before the material can be included in the +kernel. Know that this happens because everyone involved wants to see +the best possible solution for the overall success of Linux. This +development process has been proven to create the most robust operating +system kernel ever, and we do not want to do anything to cause the +quality of submission and eventual result to ever decrease. + +Maintainers +----------- + +The Code of Conduct uses the term "maintainers" numerous times. In the +kernel community, a "maintainer" is anyone who is responsible for a +subsystem, driver, or file, and is listed in the MAINTAINERS file in the +kernel source tree. + +Responsibilities +---------------- + +The Code of Conduct mentions rights and responsibilities for +maintainers, and this needs some further clarifications. + +First and foremost, it is a reasonable expectation to have maintainers +lead by example. + +That being said, our community is vast and broad, and there is no new +requirement for maintainers to unilaterally handle how other people +behave in the parts of the community where they are active. That +responsibility is upon all of us, and ultimately the Code of Conduct +documents final escalation paths in case of unresolved concerns +regarding conduct issues. + +Maintainers should be willing to help when problems occur, and work with +others in the community when needed. Do not be afraid to reach out to +the Technical Advisory Board (TAB) or other maintainers if you're +uncertain how to handle situations that come up. It will not be +considered a violation report unless you want it to be. If you are +uncertain about approaching the TAB or any other maintainers, please +reach out to our conflict mediator, Mishi Choudhary <mishi@linux.com>. + +In the end, "be kind to each other" is really what the end goal is for +everybody. We know everyone is human and we all fail at times, but the +primary goal for all of us should be to work toward amicable resolutions +of problems. Enforcement of the code of conduct will only be a last +resort option. + +Our goal of creating a robust and technically advanced operating system +and the technical complexity involved naturally require expertise and +decision-making. + +The required expertise varies depending on the area of contribution. It +is determined mainly by context and technical complexity and only +secondary by the expectations of contributors and maintainers. + +Both the expertise expectations and decision-making are subject to +discussion, but at the very end there is a basic necessity to be able to +make decisions in order to make progress. This prerogative is in the +hands of maintainers and project's leadership and is expected to be used +in good faith. + +As a consequence, setting expertise expectations, making decisions and +rejecting unsuitable contributions are not viewed as a violation of the +Code of Conduct. + +While maintainers are in general welcoming to newcomers, their capacity +of helping contributors overcome the entry hurdles is limited, so they +have to set priorities. This, also, is not to be seen as a violation of +the Code of Conduct. The kernel community is aware of that and provides +entry level programs in various forms like kernelnewbies.org. + +Scope +----- + +The Linux kernel community primarily interacts on a set of public email +lists distributed around a number of different servers controlled by a +number of different companies or individuals. All of these lists are +defined in the MAINTAINERS file in the kernel source tree. Any emails +sent to those mailing lists are considered covered by the Code of +Conduct. + +Developers who use the kernel.org bugzilla, and other subsystem bugzilla +or bug tracking tools should follow the guidelines of the Code of +Conduct. The Linux kernel community does not have an "official" project +email address, or "official" social media address. Any activity +performed using a kernel.org email account must follow the Code of +Conduct as published for kernel.org, just as any individual using a +corporate email account must follow the specific rules of that +corporation. + +The Code of Conduct does not prohibit continuing to include names, email +addresses, and associated comments in mailing list messages, kernel +change log messages, or code comments. + +Interaction in other forums is covered by whatever rules apply to said +forums and is in general not covered by the Code of Conduct. Exceptions +may be considered for extreme circumstances. + +Contributions submitted for the kernel should use appropriate language. +Content that already exists predating the Code of Conduct will not be +addressed now as a violation. Inappropriate language can be seen as a +bug, though; such bugs will be fixed more quickly if any interested +parties submit patches to that effect. Expressions that are currently +part of the user/kernel API, or reflect terminology used in published +standards or specifications, are not considered bugs. + +Enforcement +----------- + +The address listed in the Code of Conduct goes to the Code of Conduct +Committee. The exact members receiving these emails at any given time +are listed at https://kernel.org/code-of-conduct.html. Members can not +access reports made before they joined or after they have left the +committee. + +The initial Code of Conduct Committee consists of volunteer members of +the TAB, as well as a professional mediator acting as a neutral third +party. The first task of the committee is to establish documented +processes, which will be made public. + +Any member of the committee, including the mediator, can be contacted +directly if a reporter does not wish to include the full committee in a +complaint or concern. + +The Code of Conduct Committee reviews the cases according to the +processes (see above) and consults with the TAB as needed and +appropriate, for instance to request and receive information about the +kernel community. + +Any decisions by the committee will be brought to the TAB, for +implementation of enforcement with the relevant maintainers if needed. +A decision by the Code of Conduct Committee can be overturned by the TAB +by a two-thirds vote. + +At quarterly intervals, the Code of Conduct Committee and TAB will +provide a report summarizing the anonymised reports that the Code of +Conduct committee has received and their status, as well details of any +overridden decisions including complete and identifiable voting details. + +We expect to establish a different process for Code of Conduct Committee +staffing beyond the bootstrap period. This document will be updated +with that information when this occurs. diff --git a/Documentation/process/code-of-conduct.rst b/Documentation/process/code-of-conduct.rst new file mode 100644 index 000000000..be50294ae --- /dev/null +++ b/Documentation/process/code-of-conduct.rst @@ -0,0 +1,86 @@ +.. _code_of_conduct: + +Contributor Covenant Code of Conduct +++++++++++++++++++++++++++++++++++++ + +Our Pledge +========== + +In the interest of fostering an open and welcoming environment, we as +contributors and maintainers pledge to making participation in our project and +our community a harassment-free experience for everyone, regardless of age, body +size, disability, ethnicity, sex characteristics, gender identity and +expression, level of experience, education, socio-economic status, nationality, +personal appearance, race, religion, or sexual identity and orientation. + +Our Standards +============= + +Examples of behavior that contributes to creating a positive environment +include: + +* Using welcoming and inclusive language +* Being respectful of differing viewpoints and experiences +* Gracefully accepting constructive criticism +* Focusing on what is best for the community +* Showing empathy towards other community members + + +Examples of unacceptable behavior by participants include: + +* The use of sexualized language or imagery and unwelcome sexual attention or + advances +* Trolling, insulting/derogatory comments, and personal or political attacks +* Public or private harassment +* Publishing others’ private information, such as a physical or electronic + address, without explicit permission +* Other conduct which could reasonably be considered inappropriate in a + professional setting + + +Our Responsibilities +==================== + +Maintainers are responsible for clarifying the standards of acceptable behavior +and are expected to take appropriate and fair corrective action in response to +any instances of unacceptable behavior. + +Maintainers have the right and responsibility to remove, edit, or reject +comments, commits, code, wiki edits, issues, and other contributions that are +not aligned to this Code of Conduct, or to ban temporarily or permanently any +contributor for other behaviors that they deem inappropriate, threatening, +offensive, or harmful. + +Scope +===== + +This Code of Conduct applies both within project spaces and in public spaces +when an individual is representing the project or its community. Examples of +representing a project or community include using an official project e-mail +address, posting via an official social media account, or acting as an appointed +representative at an online or offline event. Representation of a project may be +further defined and clarified by project maintainers. + +Enforcement +=========== + +Instances of abusive, harassing, or otherwise unacceptable behavior may be +reported by contacting the Code of Conduct Committee at +<conduct@kernel.org>. All complaints will be reviewed and investigated +and will result in a response that is deemed necessary and appropriate +to the circumstances. The Code of Conduct Committee is obligated to +maintain confidentiality with regard to the reporter of an incident. +Further details of specific enforcement policies may be posted +separately. + +Attribution +=========== + +This Code of Conduct is adapted from the Contributor Covenant, version 1.4, +available at https://www.contributor-covenant.org/version/1/4/code-of-conduct.html + +Interpretation +============== + +See the :ref:`code_of_conduct_interpretation` document for how the Linux +kernel community will be interpreting this document. diff --git a/Documentation/process/coding-style.rst b/Documentation/process/coding-style.rst new file mode 100644 index 000000000..4e7c0a1c4 --- /dev/null +++ b/Documentation/process/coding-style.rst @@ -0,0 +1,1079 @@ +.. _codingstyle: + +Linux kernel coding style +========================= + +This is a short document describing the preferred coding style for the +linux kernel. Coding style is very personal, and I won't **force** my +views on anybody, but this is what goes for anything that I have to be +able to maintain, and I'd prefer it for most other things too. Please +at least consider the points made here. + +First off, I'd suggest printing out a copy of the GNU coding standards, +and NOT read it. Burn them, it's a great symbolic gesture. + +Anyway, here goes: + + +1) Indentation +-------------- + +Tabs are 8 characters, and thus indentations are also 8 characters. +There are heretic movements that try to make indentations 4 (or even 2!) +characters deep, and that is akin to trying to define the value of PI to +be 3. + +Rationale: The whole idea behind indentation is to clearly define where +a block of control starts and ends. Especially when you've been looking +at your screen for 20 straight hours, you'll find it a lot easier to see +how the indentation works if you have large indentations. + +Now, some people will claim that having 8-character indentations makes +the code move too far to the right, and makes it hard to read on a +80-character terminal screen. The answer to that is that if you need +more than 3 levels of indentation, you're screwed anyway, and should fix +your program. + +In short, 8-char indents make things easier to read, and have the added +benefit of warning you when you're nesting your functions too deep. +Heed that warning. + +The preferred way to ease multiple indentation levels in a switch statement is +to align the ``switch`` and its subordinate ``case`` labels in the same column +instead of ``double-indenting`` the ``case`` labels. E.g.: + +.. code-block:: c + + switch (suffix) { + case 'G': + case 'g': + mem <<= 30; + break; + case 'M': + case 'm': + mem <<= 20; + break; + case 'K': + case 'k': + mem <<= 10; + /* fall through */ + default: + break; + } + +Don't put multiple statements on a single line unless you have +something to hide: + +.. code-block:: c + + if (condition) do_this; + do_something_everytime; + +Don't put multiple assignments on a single line either. Kernel coding style +is super simple. Avoid tricky expressions. + +Outside of comments, documentation and except in Kconfig, spaces are never +used for indentation, and the above example is deliberately broken. + +Get a decent editor and don't leave whitespace at the end of lines. + + +2) Breaking long lines and strings +---------------------------------- + +Coding style is all about readability and maintainability using commonly +available tools. + +The limit on the length of lines is 80 columns and this is a strongly +preferred limit. + +Statements longer than 80 columns will be broken into sensible chunks, unless +exceeding 80 columns significantly increases readability and does not hide +information. Descendants are always substantially shorter than the parent and +are placed substantially to the right. The same applies to function headers +with a long argument list. However, never break user-visible strings such as +printk messages, because that breaks the ability to grep for them. + + +3) Placing Braces and Spaces +---------------------------- + +The other issue that always comes up in C styling is the placement of +braces. Unlike the indent size, there are few technical reasons to +choose one placement strategy over the other, but the preferred way, as +shown to us by the prophets Kernighan and Ritchie, is to put the opening +brace last on the line, and put the closing brace first, thusly: + +.. code-block:: c + + if (x is true) { + we do y + } + +This applies to all non-function statement blocks (if, switch, for, +while, do). E.g.: + +.. code-block:: c + + switch (action) { + case KOBJ_ADD: + return "add"; + case KOBJ_REMOVE: + return "remove"; + case KOBJ_CHANGE: + return "change"; + default: + return NULL; + } + +However, there is one special case, namely functions: they have the +opening brace at the beginning of the next line, thus: + +.. code-block:: c + + int function(int x) + { + body of function + } + +Heretic people all over the world have claimed that this inconsistency +is ... well ... inconsistent, but all right-thinking people know that +(a) K&R are **right** and (b) K&R are right. Besides, functions are +special anyway (you can't nest them in C). + +Note that the closing brace is empty on a line of its own, **except** in +the cases where it is followed by a continuation of the same statement, +ie a ``while`` in a do-statement or an ``else`` in an if-statement, like +this: + +.. code-block:: c + + do { + body of do-loop + } while (condition); + +and + +.. code-block:: c + + if (x == y) { + .. + } else if (x > y) { + ... + } else { + .... + } + +Rationale: K&R. + +Also, note that this brace-placement also minimizes the number of empty +(or almost empty) lines, without any loss of readability. Thus, as the +supply of new-lines on your screen is not a renewable resource (think +25-line terminal screens here), you have more empty lines to put +comments on. + +Do not unnecessarily use braces where a single statement will do. + +.. code-block:: c + + if (condition) + action(); + +and + +.. code-block:: none + + if (condition) + do_this(); + else + do_that(); + +This does not apply if only one branch of a conditional statement is a single +statement; in the latter case use braces in both branches: + +.. code-block:: c + + if (condition) { + do_this(); + do_that(); + } else { + otherwise(); + } + +Also, use braces when a loop contains more than a single simple statement: + +.. code-block:: c + + while (condition) { + if (test) + do_something(); + } + +3.1) Spaces +*********** + +Linux kernel style for use of spaces depends (mostly) on +function-versus-keyword usage. Use a space after (most) keywords. The +notable exceptions are sizeof, typeof, alignof, and __attribute__, which look +somewhat like functions (and are usually used with parentheses in Linux, +although they are not required in the language, as in: ``sizeof info`` after +``struct fileinfo info;`` is declared). + +So use a space after these keywords:: + + if, switch, case, for, do, while + +but not with sizeof, typeof, alignof, or __attribute__. E.g., + +.. code-block:: c + + + s = sizeof(struct file); + +Do not add spaces around (inside) parenthesized expressions. This example is +**bad**: + +.. code-block:: c + + + s = sizeof( struct file ); + +When declaring pointer data or a function that returns a pointer type, the +preferred use of ``*`` is adjacent to the data name or function name and not +adjacent to the type name. Examples: + +.. code-block:: c + + + char *linux_banner; + unsigned long long memparse(char *ptr, char **retptr); + char *match_strdup(substring_t *s); + +Use one space around (on each side of) most binary and ternary operators, +such as any of these:: + + = + - < > * / % | & ^ <= >= == != ? : + +but no space after unary operators:: + + & * + - ~ ! sizeof typeof alignof __attribute__ defined + +no space before the postfix increment & decrement unary operators:: + + ++ -- + +no space after the prefix increment & decrement unary operators:: + + ++ -- + +and no space around the ``.`` and ``->`` structure member operators. + +Do not leave trailing whitespace at the ends of lines. Some editors with +``smart`` indentation will insert whitespace at the beginning of new lines as +appropriate, so you can start typing the next line of code right away. +However, some such editors do not remove the whitespace if you end up not +putting a line of code there, such as if you leave a blank line. As a result, +you end up with lines containing trailing whitespace. + +Git will warn you about patches that introduce trailing whitespace, and can +optionally strip the trailing whitespace for you; however, if applying a series +of patches, this may make later patches in the series fail by changing their +context lines. + + +4) Naming +--------- + +C is a Spartan language, and so should your naming be. Unlike Modula-2 +and Pascal programmers, C programmers do not use cute names like +ThisVariableIsATemporaryCounter. A C programmer would call that +variable ``tmp``, which is much easier to write, and not the least more +difficult to understand. + +HOWEVER, while mixed-case names are frowned upon, descriptive names for +global variables are a must. To call a global function ``foo`` is a +shooting offense. + +GLOBAL variables (to be used only if you **really** need them) need to +have descriptive names, as do global functions. If you have a function +that counts the number of active users, you should call that +``count_active_users()`` or similar, you should **not** call it ``cntusr()``. + +Encoding the type of a function into the name (so-called Hungarian +notation) is brain damaged - the compiler knows the types anyway and can +check those, and it only confuses the programmer. No wonder MicroSoft +makes buggy programs. + +LOCAL variable names should be short, and to the point. If you have +some random integer loop counter, it should probably be called ``i``. +Calling it ``loop_counter`` is non-productive, if there is no chance of it +being mis-understood. Similarly, ``tmp`` can be just about any type of +variable that is used to hold a temporary value. + +If you are afraid to mix up your local variable names, you have another +problem, which is called the function-growth-hormone-imbalance syndrome. +See chapter 6 (Functions). + + +5) Typedefs +----------- + +Please don't use things like ``vps_t``. +It's a **mistake** to use typedef for structures and pointers. When you see a + +.. code-block:: c + + + vps_t a; + +in the source, what does it mean? +In contrast, if it says + +.. code-block:: c + + struct virtual_container *a; + +you can actually tell what ``a`` is. + +Lots of people think that typedefs ``help readability``. Not so. They are +useful only for: + + (a) totally opaque objects (where the typedef is actively used to **hide** + what the object is). + + Example: ``pte_t`` etc. opaque objects that you can only access using + the proper accessor functions. + + .. note:: + + Opaqueness and ``accessor functions`` are not good in themselves. + The reason we have them for things like pte_t etc. is that there + really is absolutely **zero** portably accessible information there. + + (b) Clear integer types, where the abstraction **helps** avoid confusion + whether it is ``int`` or ``long``. + + u8/u16/u32 are perfectly fine typedefs, although they fit into + category (d) better than here. + + .. note:: + + Again - there needs to be a **reason** for this. If something is + ``unsigned long``, then there's no reason to do + + typedef unsigned long myflags_t; + + but if there is a clear reason for why it under certain circumstances + might be an ``unsigned int`` and under other configurations might be + ``unsigned long``, then by all means go ahead and use a typedef. + + (c) when you use sparse to literally create a **new** type for + type-checking. + + (d) New types which are identical to standard C99 types, in certain + exceptional circumstances. + + Although it would only take a short amount of time for the eyes and + brain to become accustomed to the standard types like ``uint32_t``, + some people object to their use anyway. + + Therefore, the Linux-specific ``u8/u16/u32/u64`` types and their + signed equivalents which are identical to standard types are + permitted -- although they are not mandatory in new code of your + own. + + When editing existing code which already uses one or the other set + of types, you should conform to the existing choices in that code. + + (e) Types safe for use in userspace. + + In certain structures which are visible to userspace, we cannot + require C99 types and cannot use the ``u32`` form above. Thus, we + use __u32 and similar types in all structures which are shared + with userspace. + +Maybe there are other cases too, but the rule should basically be to NEVER +EVER use a typedef unless you can clearly match one of those rules. + +In general, a pointer, or a struct that has elements that can reasonably +be directly accessed should **never** be a typedef. + + +6) Functions +------------ + +Functions should be short and sweet, and do just one thing. They should +fit on one or two screenfuls of text (the ISO/ANSI screen size is 80x24, +as we all know), and do one thing and do that well. + +The maximum length of a function is inversely proportional to the +complexity and indentation level of that function. So, if you have a +conceptually simple function that is just one long (but simple) +case-statement, where you have to do lots of small things for a lot of +different cases, it's OK to have a longer function. + +However, if you have a complex function, and you suspect that a +less-than-gifted first-year high-school student might not even +understand what the function is all about, you should adhere to the +maximum limits all the more closely. Use helper functions with +descriptive names (you can ask the compiler to in-line them if you think +it's performance-critical, and it will probably do a better job of it +than you would have done). + +Another measure of the function is the number of local variables. They +shouldn't exceed 5-10, or you're doing something wrong. Re-think the +function, and split it into smaller pieces. A human brain can +generally easily keep track of about 7 different things, anything more +and it gets confused. You know you're brilliant, but maybe you'd like +to understand what you did 2 weeks from now. + +In source files, separate functions with one blank line. If the function is +exported, the **EXPORT** macro for it should follow immediately after the +closing function brace line. E.g.: + +.. code-block:: c + + int system_is_up(void) + { + return system_state == SYSTEM_RUNNING; + } + EXPORT_SYMBOL(system_is_up); + +In function prototypes, include parameter names with their data types. +Although this is not required by the C language, it is preferred in Linux +because it is a simple way to add valuable information for the reader. + + +7) Centralized exiting of functions +----------------------------------- + +Albeit deprecated by some people, the equivalent of the goto statement is +used frequently by compilers in form of the unconditional jump instruction. + +The goto statement comes in handy when a function exits from multiple +locations and some common work such as cleanup has to be done. If there is no +cleanup needed then just return directly. + +Choose label names which say what the goto does or why the goto exists. An +example of a good name could be ``out_free_buffer:`` if the goto frees ``buffer``. +Avoid using GW-BASIC names like ``err1:`` and ``err2:``, as you would have to +renumber them if you ever add or remove exit paths, and they make correctness +difficult to verify anyway. + +The rationale for using gotos is: + +- unconditional statements are easier to understand and follow +- nesting is reduced +- errors by not updating individual exit points when making + modifications are prevented +- saves the compiler work to optimize redundant code away ;) + +.. code-block:: c + + int fun(int a) + { + int result = 0; + char *buffer; + + buffer = kmalloc(SIZE, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + if (condition1) { + while (loop1) { + ... + } + result = 1; + goto out_free_buffer; + } + ... + out_free_buffer: + kfree(buffer); + return result; + } + +A common type of bug to be aware of is ``one err bugs`` which look like this: + +.. code-block:: c + + err: + kfree(foo->bar); + kfree(foo); + return ret; + +The bug in this code is that on some exit paths ``foo`` is NULL. Normally the +fix for this is to split it up into two error labels ``err_free_bar:`` and +``err_free_foo:``: + +.. code-block:: c + + err_free_bar: + kfree(foo->bar); + err_free_foo: + kfree(foo); + return ret; + +Ideally you should simulate errors to test all exit paths. + + +8) Commenting +------------- + +Comments are good, but there is also a danger of over-commenting. NEVER +try to explain HOW your code works in a comment: it's much better to +write the code so that the **working** is obvious, and it's a waste of +time to explain badly written code. + +Generally, you want your comments to tell WHAT your code does, not HOW. +Also, try to avoid putting comments inside a function body: if the +function is so complex that you need to separately comment parts of it, +you should probably go back to chapter 6 for a while. You can make +small comments to note or warn about something particularly clever (or +ugly), but try to avoid excess. Instead, put the comments at the head +of the function, telling people what it does, and possibly WHY it does +it. + +When commenting the kernel API functions, please use the kernel-doc format. +See the files at :ref:`Documentation/doc-guide/ <doc_guide>` and +``scripts/kernel-doc`` for details. + +The preferred style for long (multi-line) comments is: + +.. code-block:: c + + /* + * This is the preferred style for multi-line + * comments in the Linux kernel source code. + * Please use it consistently. + * + * Description: A column of asterisks on the left side, + * with beginning and ending almost-blank lines. + */ + +For files in net/ and drivers/net/ the preferred style for long (multi-line) +comments is a little different. + +.. code-block:: c + + /* The preferred comment style for files in net/ and drivers/net + * looks like this. + * + * It is nearly the same as the generally preferred comment style, + * but there is no initial almost-blank line. + */ + +It's also important to comment data, whether they are basic types or derived +types. To this end, use just one data declaration per line (no commas for +multiple data declarations). This leaves you room for a small comment on each +item, explaining its use. + + +9) You've made a mess of it +--------------------------- + +That's OK, we all do. You've probably been told by your long-time Unix +user helper that ``GNU emacs`` automatically formats the C sources for +you, and you've noticed that yes, it does do that, but the defaults it +uses are less than desirable (in fact, they are worse than random +typing - an infinite number of monkeys typing into GNU emacs would never +make a good program). + +So, you can either get rid of GNU emacs, or change it to use saner +values. To do the latter, you can stick the following in your .emacs file: + +.. code-block:: none + + (defun c-lineup-arglist-tabs-only (ignored) + "Line up argument lists by tabs, not spaces" + (let* ((anchor (c-langelem-pos c-syntactic-element)) + (column (c-langelem-2nd-pos c-syntactic-element)) + (offset (- (1+ column) anchor)) + (steps (floor offset c-basic-offset))) + (* (max steps 1) + c-basic-offset))) + + (add-hook 'c-mode-common-hook + (lambda () + ;; Add kernel style + (c-add-style + "linux-tabs-only" + '("linux" (c-offsets-alist + (arglist-cont-nonempty + c-lineup-gcc-asm-reg + c-lineup-arglist-tabs-only)))))) + + (add-hook 'c-mode-hook + (lambda () + (let ((filename (buffer-file-name))) + ;; Enable kernel mode for the appropriate files + (when (and filename + (string-match (expand-file-name "~/src/linux-trees") + filename)) + (setq indent-tabs-mode t) + (setq show-trailing-whitespace t) + (c-set-style "linux-tabs-only"))))) + +This will make emacs go better with the kernel coding style for C +files below ``~/src/linux-trees``. + +But even if you fail in getting emacs to do sane formatting, not +everything is lost: use ``indent``. + +Now, again, GNU indent has the same brain-dead settings that GNU emacs +has, which is why you need to give it a few command line options. +However, that's not too bad, because even the makers of GNU indent +recognize the authority of K&R (the GNU people aren't evil, they are +just severely misguided in this matter), so you just give indent the +options ``-kr -i8`` (stands for ``K&R, 8 character indents``), or use +``scripts/Lindent``, which indents in the latest style. + +``indent`` has a lot of options, and especially when it comes to comment +re-formatting you may want to take a look at the man page. But +remember: ``indent`` is not a fix for bad programming. + +Note that you can also use the ``clang-format`` tool to help you with +these rules, to quickly re-format parts of your code automatically, +and to review full files in order to spot coding style mistakes, +typos and possible improvements. It is also handy for sorting ``#includes``, +for aligning variables/macros, for reflowing text and other similar tasks. +See the file :ref:`Documentation/process/clang-format.rst <clangformat>` +for more details. + + +10) Kconfig configuration files +------------------------------- + +For all of the Kconfig* configuration files throughout the source tree, +the indentation is somewhat different. Lines under a ``config`` definition +are indented with one tab, while help text is indented an additional two +spaces. Example:: + + config AUDIT + bool "Auditing support" + depends on NET + help + Enable auditing infrastructure that can be used with another + kernel subsystem, such as SELinux (which requires this for + logging of avc messages output). Does not do system-call + auditing without CONFIG_AUDITSYSCALL. + +Seriously dangerous features (such as write support for certain +filesystems) should advertise this prominently in their prompt string:: + + config ADFS_FS_RW + bool "ADFS write support (DANGEROUS)" + depends on ADFS_FS + ... + +For full documentation on the configuration files, see the file +Documentation/kbuild/kconfig-language.txt. + + +11) Data structures +------------------- + +Data structures that have visibility outside the single-threaded +environment they are created and destroyed in should always have +reference counts. In the kernel, garbage collection doesn't exist (and +outside the kernel garbage collection is slow and inefficient), which +means that you absolutely **have** to reference count all your uses. + +Reference counting means that you can avoid locking, and allows multiple +users to have access to the data structure in parallel - and not having +to worry about the structure suddenly going away from under them just +because they slept or did something else for a while. + +Note that locking is **not** a replacement for reference counting. +Locking is used to keep data structures coherent, while reference +counting is a memory management technique. Usually both are needed, and +they are not to be confused with each other. + +Many data structures can indeed have two levels of reference counting, +when there are users of different ``classes``. The subclass count counts +the number of subclass users, and decrements the global count just once +when the subclass count goes to zero. + +Examples of this kind of ``multi-level-reference-counting`` can be found in +memory management (``struct mm_struct``: mm_users and mm_count), and in +filesystem code (``struct super_block``: s_count and s_active). + +Remember: if another thread can find your data structure, and you don't +have a reference count on it, you almost certainly have a bug. + + +12) Macros, Enums and RTL +------------------------- + +Names of macros defining constants and labels in enums are capitalized. + +.. code-block:: c + + #define CONSTANT 0x12345 + +Enums are preferred when defining several related constants. + +CAPITALIZED macro names are appreciated but macros resembling functions +may be named in lower case. + +Generally, inline functions are preferable to macros resembling functions. + +Macros with multiple statements should be enclosed in a do - while block: + +.. code-block:: c + + #define macrofun(a, b, c) \ + do { \ + if (a == 5) \ + do_this(b, c); \ + } while (0) + +Things to avoid when using macros: + +1) macros that affect control flow: + +.. code-block:: c + + #define FOO(x) \ + do { \ + if (blah(x) < 0) \ + return -EBUGGERED; \ + } while (0) + +is a **very** bad idea. It looks like a function call but exits the ``calling`` +function; don't break the internal parsers of those who will read the code. + +2) macros that depend on having a local variable with a magic name: + +.. code-block:: c + + #define FOO(val) bar(index, val) + +might look like a good thing, but it's confusing as hell when one reads the +code and it's prone to breakage from seemingly innocent changes. + +3) macros with arguments that are used as l-values: FOO(x) = y; will +bite you if somebody e.g. turns FOO into an inline function. + +4) forgetting about precedence: macros defining constants using expressions +must enclose the expression in parentheses. Beware of similar issues with +macros using parameters. + +.. code-block:: c + + #define CONSTANT 0x4000 + #define CONSTEXP (CONSTANT | 3) + +5) namespace collisions when defining local variables in macros resembling +functions: + +.. code-block:: c + + #define FOO(x) \ + ({ \ + typeof(x) ret; \ + ret = calc_ret(x); \ + (ret); \ + }) + +ret is a common name for a local variable - __foo_ret is less likely +to collide with an existing variable. + +The cpp manual deals with macros exhaustively. The gcc internals manual also +covers RTL which is used frequently with assembly language in the kernel. + + +13) Printing kernel messages +---------------------------- + +Kernel developers like to be seen as literate. Do mind the spelling +of kernel messages to make a good impression. Do not use crippled +words like ``dont``; use ``do not`` or ``don't`` instead. Make the messages +concise, clear, and unambiguous. + +Kernel messages do not have to be terminated with a period. + +Printing numbers in parentheses (%d) adds no value and should be avoided. + +There are a number of driver model diagnostic macros in <linux/device.h> +which you should use to make sure messages are matched to the right device +and driver, and are tagged with the right level: dev_err(), dev_warn(), +dev_info(), and so forth. For messages that aren't associated with a +particular device, <linux/printk.h> defines pr_notice(), pr_info(), +pr_warn(), pr_err(), etc. + +Coming up with good debugging messages can be quite a challenge; and once +you have them, they can be a huge help for remote troubleshooting. However +debug message printing is handled differently than printing other non-debug +messages. While the other pr_XXX() functions print unconditionally, +pr_debug() does not; it is compiled out by default, unless either DEBUG is +defined or CONFIG_DYNAMIC_DEBUG is set. That is true for dev_dbg() also, +and a related convention uses VERBOSE_DEBUG to add dev_vdbg() messages to +the ones already enabled by DEBUG. + +Many subsystems have Kconfig debug options to turn on -DDEBUG in the +corresponding Makefile; in other cases specific files #define DEBUG. And +when a debug message should be unconditionally printed, such as if it is +already inside a debug-related #ifdef section, printk(KERN_DEBUG ...) can be +used. + + +14) Allocating memory +--------------------- + +The kernel provides the following general purpose memory allocators: +kmalloc(), kzalloc(), kmalloc_array(), kcalloc(), vmalloc(), and +vzalloc(). Please refer to the API documentation for further information +about them. + +The preferred form for passing a size of a struct is the following: + +.. code-block:: c + + p = kmalloc(sizeof(*p), ...); + +The alternative form where struct name is spelled out hurts readability and +introduces an opportunity for a bug when the pointer variable type is changed +but the corresponding sizeof that is passed to a memory allocator is not. + +Casting the return value which is a void pointer is redundant. The conversion +from void pointer to any other pointer type is guaranteed by the C programming +language. + +The preferred form for allocating an array is the following: + +.. code-block:: c + + p = kmalloc_array(n, sizeof(...), ...); + +The preferred form for allocating a zeroed array is the following: + +.. code-block:: c + + p = kcalloc(n, sizeof(...), ...); + +Both forms check for overflow on the allocation size n * sizeof(...), +and return NULL if that occurred. + + +15) The inline disease +---------------------- + +There appears to be a common misperception that gcc has a magic "make me +faster" speedup option called ``inline``. While the use of inlines can be +appropriate (for example as a means of replacing macros, see Chapter 12), it +very often is not. Abundant use of the inline keyword leads to a much bigger +kernel, which in turn slows the system as a whole down, due to a bigger +icache footprint for the CPU and simply because there is less memory +available for the pagecache. Just think about it; a pagecache miss causes a +disk seek, which easily takes 5 milliseconds. There are a LOT of cpu cycles +that can go into these 5 milliseconds. + +A reasonable rule of thumb is to not put inline at functions that have more +than 3 lines of code in them. An exception to this rule are the cases where +a parameter is known to be a compiletime constant, and as a result of this +constantness you *know* the compiler will be able to optimize most of your +function away at compile time. For a good example of this later case, see +the kmalloc() inline function. + +Often people argue that adding inline to functions that are static and used +only once is always a win since there is no space tradeoff. While this is +technically correct, gcc is capable of inlining these automatically without +help, and the maintenance issue of removing the inline when a second user +appears outweighs the potential value of the hint that tells gcc to do +something it would have done anyway. + + +16) Function return values and names +------------------------------------ + +Functions can return values of many different kinds, and one of the +most common is a value indicating whether the function succeeded or +failed. Such a value can be represented as an error-code integer +(-Exxx = failure, 0 = success) or a ``succeeded`` boolean (0 = failure, +non-zero = success). + +Mixing up these two sorts of representations is a fertile source of +difficult-to-find bugs. If the C language included a strong distinction +between integers and booleans then the compiler would find these mistakes +for us... but it doesn't. To help prevent such bugs, always follow this +convention:: + + If the name of a function is an action or an imperative command, + the function should return an error-code integer. If the name + is a predicate, the function should return a "succeeded" boolean. + +For example, ``add work`` is a command, and the add_work() function returns 0 +for success or -EBUSY for failure. In the same way, ``PCI device present`` is +a predicate, and the pci_dev_present() function returns 1 if it succeeds in +finding a matching device or 0 if it doesn't. + +All EXPORTed functions must respect this convention, and so should all +public functions. Private (static) functions need not, but it is +recommended that they do. + +Functions whose return value is the actual result of a computation, rather +than an indication of whether the computation succeeded, are not subject to +this rule. Generally they indicate failure by returning some out-of-range +result. Typical examples would be functions that return pointers; they use +NULL or the ERR_PTR mechanism to report failure. + + +17) Don't re-invent the kernel macros +------------------------------------- + +The header file include/linux/kernel.h contains a number of macros that +you should use, rather than explicitly coding some variant of them yourself. +For example, if you need to calculate the length of an array, take advantage +of the macro + +.. code-block:: c + + #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +Similarly, if you need to calculate the size of some structure member, use + +.. code-block:: c + + #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) + +There are also min() and max() macros that do strict type checking if you +need them. Feel free to peruse that header file to see what else is already +defined that you shouldn't reproduce in your code. + + +18) Editor modelines and other cruft +------------------------------------ + +Some editors can interpret configuration information embedded in source files, +indicated with special markers. For example, emacs interprets lines marked +like this: + +.. code-block:: c + + -*- mode: c -*- + +Or like this: + +.. code-block:: c + + /* + Local Variables: + compile-command: "gcc -DMAGIC_DEBUG_FLAG foo.c" + End: + */ + +Vim interprets markers that look like this: + +.. code-block:: c + + /* vim:set sw=8 noet */ + +Do not include any of these in source files. People have their own personal +editor configurations, and your source files should not override them. This +includes markers for indentation and mode configuration. People may use their +own custom mode, or may have some other magic method for making indentation +work correctly. + + +19) Inline assembly +------------------- + +In architecture-specific code, you may need to use inline assembly to interface +with CPU or platform functionality. Don't hesitate to do so when necessary. +However, don't use inline assembly gratuitously when C can do the job. You can +and should poke hardware from C when possible. + +Consider writing simple helper functions that wrap common bits of inline +assembly, rather than repeatedly writing them with slight variations. Remember +that inline assembly can use C parameters. + +Large, non-trivial assembly functions should go in .S files, with corresponding +C prototypes defined in C header files. The C prototypes for assembly +functions should use ``asmlinkage``. + +You may need to mark your asm statement as volatile, to prevent GCC from +removing it if GCC doesn't notice any side effects. You don't always need to +do so, though, and doing so unnecessarily can limit optimization. + +When writing a single inline assembly statement containing multiple +instructions, put each instruction on a separate line in a separate quoted +string, and end each string except the last with ``\n\t`` to properly indent +the next instruction in the assembly output: + +.. code-block:: c + + asm ("magic %reg1, #42\n\t" + "more_magic %reg2, %reg3" + : /* outputs */ : /* inputs */ : /* clobbers */); + + +20) Conditional Compilation +--------------------------- + +Wherever possible, don't use preprocessor conditionals (#if, #ifdef) in .c +files; doing so makes code harder to read and logic harder to follow. Instead, +use such conditionals in a header file defining functions for use in those .c +files, providing no-op stub versions in the #else case, and then call those +functions unconditionally from .c files. The compiler will avoid generating +any code for the stub calls, producing identical results, but the logic will +remain easy to follow. + +Prefer to compile out entire functions, rather than portions of functions or +portions of expressions. Rather than putting an ifdef in an expression, factor +out part or all of the expression into a separate helper function and apply the +conditional to that function. + +If you have a function or variable which may potentially go unused in a +particular configuration, and the compiler would warn about its definition +going unused, mark the definition as __maybe_unused rather than wrapping it in +a preprocessor conditional. (However, if a function or variable *always* goes +unused, delete it.) + +Within code, where possible, use the IS_ENABLED macro to convert a Kconfig +symbol into a C boolean expression, and use it in a normal C conditional: + +.. code-block:: c + + if (IS_ENABLED(CONFIG_SOMETHING)) { + ... + } + +The compiler will constant-fold the conditional away, and include or exclude +the block of code just as with an #ifdef, so this will not add any runtime +overhead. However, this approach still allows the C compiler to see the code +inside the block, and check it for correctness (syntax, types, symbol +references, etc). Thus, you still have to use an #ifdef if the code inside the +block references symbols that will not exist if the condition is not met. + +At the end of any non-trivial #if or #ifdef block (more than a few lines), +place a comment after the #endif on the same line, noting the conditional +expression used. For instance: + +.. code-block:: c + + #ifdef CONFIG_SOMETHING + ... + #endif /* CONFIG_SOMETHING */ + + +Appendix I) References +---------------------- + +The C Programming Language, Second Edition +by Brian W. Kernighan and Dennis M. Ritchie. +Prentice Hall, Inc., 1988. +ISBN 0-13-110362-8 (paperback), 0-13-110370-9 (hardback). + +The Practice of Programming +by Brian W. Kernighan and Rob Pike. +Addison-Wesley, Inc., 1999. +ISBN 0-201-61586-X. + +GNU manuals - where in compliance with K&R and this text - for cpp, gcc, +gcc internals and indent, all available from http://www.gnu.org/manual/ + +WG14 is the international standardization working group for the programming +language C, URL: http://www.open-std.org/JTC1/SC22/WG14/ + +Kernel process/coding-style.rst, by greg@kroah.com at OLS 2002: +http://www.kroah.com/linux/talks/ols_2002_kernel_codingstyle_talk/html/ diff --git a/Documentation/process/conf.py b/Documentation/process/conf.py new file mode 100644 index 000000000..1b01a80ad --- /dev/null +++ b/Documentation/process/conf.py @@ -0,0 +1,10 @@ +# -*- coding: utf-8; mode: python -*- + +project = 'Linux Kernel Development Documentation' + +tags.add("subproject") + +latex_documents = [ + ('index', 'process.tex', 'Linux Kernel Development Documentation', + 'The kernel development community', 'manual'), +] diff --git a/Documentation/process/development-process.rst b/Documentation/process/development-process.rst new file mode 100644 index 000000000..61c627e41 --- /dev/null +++ b/Documentation/process/development-process.rst @@ -0,0 +1,28 @@ +.. _development_process_main: + +A guide to the Kernel Development Process +========================================= + +Contents: + +.. toctree:: + :numbered: + :maxdepth: 2 + + 1.Intro + 2.Process + 3.Early-stage + 4.Coding + 5.Posting + 6.Followthrough + 7.AdvancedTopics + 8.Conclusion + +The purpose of this document is to help developers (and their managers) +work with the development community with a minimum of frustration. It is +an attempt to document how this community works in a way which is +accessible to those who are not intimately familiar with Linux kernel +development (or, indeed, free software development in general). While +there is some technical material here, this is very much a process-oriented +discussion which does not require a deep knowledge of kernel programming to +understand. diff --git a/Documentation/process/email-clients.rst b/Documentation/process/email-clients.rst new file mode 100644 index 000000000..07faa5457 --- /dev/null +++ b/Documentation/process/email-clients.rst @@ -0,0 +1,324 @@ +.. _email_clients: + +Email clients info for Linux +============================ + +Git +--- + +These days most developers use ``git send-email`` instead of regular +email clients. The man page for this is quite good. On the receiving +end, maintainers use ``git am`` to apply the patches. + +If you are new to ``git`` then send your first patch to yourself. Save it +as raw text including all the headers. Run ``git am raw_email.txt`` and +then review the changelog with ``git log``. When that works then send +the patch to the appropriate mailing list(s). + +General Preferences +------------------- + +Patches for the Linux kernel are submitted via email, preferably as +inline text in the body of the email. Some maintainers accept +attachments, but then the attachments should have content-type +``text/plain``. However, attachments are generally frowned upon because +it makes quoting portions of the patch more difficult in the patch +review process. + +Email clients that are used for Linux kernel patches should send the +patch text untouched. For example, they should not modify or delete tabs +or spaces, even at the beginning or end of lines. + +Don't send patches with ``format=flowed``. This can cause unexpected +and unwanted line breaks. + +Don't let your email client do automatic word wrapping for you. +This can also corrupt your patch. + +Email clients should not modify the character set encoding of the text. +Emailed patches should be in ASCII or UTF-8 encoding only. +If you configure your email client to send emails with UTF-8 encoding, +you avoid some possible charset problems. + +Email clients should generate and maintain References: or In-Reply-To: +headers so that mail threading is not broken. + +Copy-and-paste (or cut-and-paste) usually does not work for patches +because tabs are converted to spaces. Using xclipboard, xclip, and/or +xcutsel may work, but it's best to test this for yourself or just avoid +copy-and-paste. + +Don't use PGP/GPG signatures in mail that contains patches. +This breaks many scripts that read and apply the patches. +(This should be fixable.) + +It's a good idea to send a patch to yourself, save the received message, +and successfully apply it with 'patch' before sending patches to Linux +mailing lists. + + +Some email client (MUA) hints +----------------------------- + +Here are some specific MUA configuration hints for editing and sending +patches for the Linux kernel. These are not meant to be complete +software package configuration summaries. + + +Legend: + +- TUI = text-based user interface +- GUI = graphical user interface + +Alpine (TUI) +************ + +Config options: + +In the :menuselection:`Sending Preferences` section: + +- :menuselection:`Do Not Send Flowed Text` must be ``enabled`` +- :menuselection:`Strip Whitespace Before Sending` must be ``disabled`` + +When composing the message, the cursor should be placed where the patch +should appear, and then pressing :kbd:`CTRL-R` let you specify the patch file +to insert into the message. + +Claws Mail (GUI) +**************** + +Works. Some people use this successfully for patches. + +To insert a patch use :menuselection:`Message-->Insert` File (:kbd:`CTRL-I`) +or an external editor. + +If the inserted patch has to be edited in the Claws composition window +"Auto wrapping" in +:menuselection:`Configuration-->Preferences-->Compose-->Wrapping` should be +disabled. + +Evolution (GUI) +*************** + +Some people use this successfully for patches. + +When composing mail select: Preformat + from :menuselection:`Format-->Paragraph Style-->Preformatted` (:kbd:`CTRL-7`) + or the toolbar + +Then use: +:menuselection:`Insert-->Text File...` (:kbd:`ALT-N x`) +to insert the patch. + +You can also ``diff -Nru old.c new.c | xclip``, select +:menuselection:`Preformat`, then paste with the middle button. + +Kmail (GUI) +*********** + +Some people use Kmail successfully for patches. + +The default setting of not composing in HTML is appropriate; do not +enable it. + +When composing an email, under options, uncheck "word wrap". The only +disadvantage is any text you type in the email will not be word-wrapped +so you will have to manually word wrap text before the patch. The easiest +way around this is to compose your email with word wrap enabled, then save +it as a draft. Once you pull it up again from your drafts it is now hard +word-wrapped and you can uncheck "word wrap" without losing the existing +wrapping. + +At the bottom of your email, put the commonly-used patch delimiter before +inserting your patch: three hyphens (``---``). + +Then from the :menuselection:`Message` menu item, select insert file and +choose your patch. +As an added bonus you can customise the message creation toolbar menu +and put the :menuselection:`insert file` icon there. + +Make the composer window wide enough so that no lines wrap. As of +KMail 1.13.5 (KDE 4.5.4), KMail will apply word wrapping when sending +the email if the lines wrap in the composer window. Having word wrapping +disabled in the Options menu isn't enough. Thus, if your patch has very +long lines, you must make the composer window very wide before sending +the email. See: https://bugs.kde.org/show_bug.cgi?id=174034 + +You can safely GPG sign attachments, but inlined text is preferred for +patches so do not GPG sign them. Signing patches that have been inserted +as inlined text will make them tricky to extract from their 7-bit encoding. + +If you absolutely must send patches as attachments instead of inlining +them as text, right click on the attachment and select properties, and +highlight :menuselection:`Suggest automatic display` to make the attachment +inlined to make it more viewable. + +When saving patches that are sent as inlined text, select the email that +contains the patch from the message list pane, right click and select +:menuselection:`save as`. You can use the whole email unmodified as a patch +if it was properly composed. There is no option currently to save the email +when you are actually viewing it in its own window -- there has been a request +filed at kmail's bugzilla and hopefully this will be addressed. Emails are +saved as read-write for user only so you will have to chmod them to make them +group and world readable if you copy them elsewhere. + +Lotus Notes (GUI) +***************** + +Run away from it. + +IBM Verse (Web GUI) +******************* + +See Lotus Notes. + +Mutt (TUI) +********** + +Plenty of Linux developers use ``mutt``, so it must work pretty well. + +Mutt doesn't come with an editor, so whatever editor you use should be +used in a way that there are no automatic linebreaks. Most editors have +an :menuselection:`insert file` option that inserts the contents of a file +unaltered. + +To use ``vim`` with mutt:: + + set editor="vi" + +If using xclip, type the command:: + + :set paste + +before middle button or shift-insert or use:: + + :r filename + +if you want to include the patch inline. +(a)ttach works fine without ``set paste``. + +You can also generate patches with ``git format-patch`` and then use Mutt +to send them:: + + $ mutt -H 0001-some-bug-fix.patch + +Config options: + +It should work with default settings. +However, it's a good idea to set the ``send_charset`` to:: + + set send_charset="us-ascii:utf-8" + +Mutt is highly customizable. Here is a minimum configuration to start +using Mutt to send patches through Gmail:: + + # .muttrc + # ================ IMAP ==================== + set imap_user = 'yourusername@gmail.com' + set imap_pass = 'yourpassword' + set spoolfile = imaps://imap.gmail.com/INBOX + set folder = imaps://imap.gmail.com/ + set record="imaps://imap.gmail.com/[Gmail]/Sent Mail" + set postponed="imaps://imap.gmail.com/[Gmail]/Drafts" + set mbox="imaps://imap.gmail.com/[Gmail]/All Mail" + + # ================ SMTP ==================== + set smtp_url = "smtp://username@smtp.gmail.com:587/" + set smtp_pass = $imap_pass + set ssl_force_tls = yes # Require encrypted connection + + # ================ Composition ==================== + set editor = `echo \$EDITOR` + set edit_headers = yes # See the headers when editing + set charset = UTF-8 # value of $LANG; also fallback for send_charset + # Sender, email address, and sign-off line must match + unset use_domain # because joe@localhost is just embarrassing + set realname = "YOUR NAME" + set from = "username@gmail.com" + set use_from = yes + +The Mutt docs have lots more information: + + http://dev.mutt.org/trac/wiki/UseCases/Gmail + + http://dev.mutt.org/doc/manual.html + +Pine (TUI) +********** + +Pine has had some whitespace truncation issues in the past, but these +should all be fixed now. + +Use alpine (pine's successor) if you can. + +Config options: + +- ``quell-flowed-text`` is needed for recent versions +- the ``no-strip-whitespace-before-send`` option is needed + + +Sylpheed (GUI) +************** + +- Works well for inlining text (or using attachments). +- Allows use of an external editor. +- Is slow on large folders. +- Won't do TLS SMTP auth over a non-SSL connection. +- Has a helpful ruler bar in the compose window. +- Adding addresses to address book doesn't understand the display name + properly. + +Thunderbird (GUI) +***************** + +Thunderbird is an Outlook clone that likes to mangle text, but there are ways +to coerce it into behaving. + +- Allow use of an external editor: + The easiest thing to do with Thunderbird and patches is to use an + "external editor" extension and then just use your favorite ``$EDITOR`` + for reading/merging patches into the body text. To do this, download + and install the extension, then add a button for it using + :menuselection:`View-->Toolbars-->Customize...` and finally just click on it + when in the :menuselection:`Compose` dialog. + + Please note that "external editor" requires that your editor must not + fork, or in other words, the editor must not return before closing. + You may have to pass additional flags or change the settings of your + editor. Most notably if you are using gvim then you must pass the -f + option to gvim by putting ``/usr/bin/gvim -f`` (if the binary is in + ``/usr/bin``) to the text editor field in :menuselection:`external editor` + settings. If you are using some other editor then please read its manual + to find out how to do this. + +To beat some sense out of the internal editor, do this: + +- Edit your Thunderbird config settings so that it won't use ``format=flowed``. + Go to :menuselection:`edit-->preferences-->advanced-->config editor` to bring up + the thunderbird's registry editor. + +- Set ``mailnews.send_plaintext_flowed`` to ``false`` + +- Set ``mailnews.wraplength`` from ``72`` to ``0`` + +- :menuselection:`View-->Message Body As-->Plain Text` + +- :menuselection:`View-->Character Encoding-->Unicode (UTF-8)` + +TkRat (GUI) +*********** + +Works. Use "Insert file..." or external editor. + +Gmail (Web GUI) +*************** + +Does not work for sending patches. + +Gmail web client converts tabs to spaces automatically. + +At the same time it wraps lines every 78 chars with CRLF style line breaks +although tab2space problem can be solved with external editor. + +Another problem is that Gmail will base64-encode any message that has a +non-ASCII character. That includes things like European names. diff --git a/Documentation/process/howto.rst b/Documentation/process/howto.rst new file mode 100644 index 000000000..130bf0f48 --- /dev/null +++ b/Documentation/process/howto.rst @@ -0,0 +1,635 @@ +HOWTO do Linux kernel development +================================= + +This is the be-all, end-all document on this topic. It contains +instructions on how to become a Linux kernel developer and how to learn +to work with the Linux kernel development community. It tries to not +contain anything related to the technical aspects of kernel programming, +but will help point you in the right direction for that. + +If anything in this document becomes out of date, please send in patches +to the maintainer of this file, who is listed at the bottom of the +document. + + +Introduction +------------ + +So, you want to learn how to become a Linux kernel developer? Or you +have been told by your manager, "Go write a Linux driver for this +device." This document's goal is to teach you everything you need to +know to achieve this by describing the process you need to go through, +and hints on how to work with the community. It will also try to +explain some of the reasons why the community works like it does. + +The kernel is written mostly in C, with some architecture-dependent +parts written in assembly. A good understanding of C is required for +kernel development. Assembly (any architecture) is not required unless +you plan to do low-level development for that architecture. Though they +are not a good substitute for a solid C education and/or years of +experience, the following books are good for, if anything, reference: + + - "The C Programming Language" by Kernighan and Ritchie [Prentice Hall] + - "Practical C Programming" by Steve Oualline [O'Reilly] + - "C: A Reference Manual" by Harbison and Steele [Prentice Hall] + +The kernel is written using GNU C and the GNU toolchain. While it +adheres to the ISO C89 standard, it uses a number of extensions that are +not featured in the standard. The kernel is a freestanding C +environment, with no reliance on the standard C library, so some +portions of the C standard are not supported. Arbitrary long long +divisions and floating point are not allowed. It can sometimes be +difficult to understand the assumptions the kernel has on the toolchain +and the extensions that it uses, and unfortunately there is no +definitive reference for them. Please check the gcc info pages (`info +gcc`) for some information on them. + +Please remember that you are trying to learn how to work with the +existing development community. It is a diverse group of people, with +high standards for coding, style and procedure. These standards have +been created over time based on what they have found to work best for +such a large and geographically dispersed team. Try to learn as much as +possible about these standards ahead of time, as they are well +documented; do not expect people to adapt to you or your company's way +of doing things. + + +Legal Issues +------------ + +The Linux kernel source code is released under the GPL. Please see the +file, COPYING, in the main directory of the source tree, for details on +the license. If you have further questions about the license, please +contact a lawyer, and do not ask on the Linux kernel mailing list. The +people on the mailing lists are not lawyers, and you should not rely on +their statements on legal matters. + +For common questions and answers about the GPL, please see: + + https://www.gnu.org/licenses/gpl-faq.html + + +Documentation +------------- + +The Linux kernel source tree has a large range of documents that are +invaluable for learning how to interact with the kernel community. When +new features are added to the kernel, it is recommended that new +documentation files are also added which explain how to use the feature. +When a kernel change causes the interface that the kernel exposes to +userspace to change, it is recommended that you send the information or +a patch to the manual pages explaining the change to the manual pages +maintainer at mtk.manpages@gmail.com, and CC the list +linux-api@vger.kernel.org. + +Here is a list of files that are in the kernel source tree that are +required reading: + + :ref:`Documentation/admin-guide/README.rst <readme>` + This file gives a short background on the Linux kernel and describes + what is necessary to do to configure and build the kernel. People + who are new to the kernel should start here. + + :ref:`Documentation/process/changes.rst <changes>` + This file gives a list of the minimum levels of various software + packages that are necessary to build and run the kernel + successfully. + + :ref:`Documentation/process/coding-style.rst <codingstyle>` + This describes the Linux kernel coding style, and some of the + rationale behind it. All new code is expected to follow the + guidelines in this document. Most maintainers will only accept + patches if these rules are followed, and many people will only + review code if it is in the proper style. + + :ref:`Documentation/process/submitting-patches.rst <submittingpatches>` and :ref:`Documentation/process/submitting-drivers.rst <submittingdrivers>` + These files describe in explicit detail how to successfully create + and send a patch, including (but not limited to): + + - Email contents + - Email format + - Who to send it to + + Following these rules will not guarantee success (as all patches are + subject to scrutiny for content and style), but not following them + will almost always prevent it. + + Other excellent descriptions of how to create patches properly are: + + "The Perfect Patch" + https://www.ozlabs.org/~akpm/stuff/tpp.txt + + "Linux kernel patch submission format" + http://linux.yyz.us/patch-format.html + + :ref:`Documentation/process/stable-api-nonsense.rst <stable_api_nonsense>` + This file describes the rationale behind the conscious decision to + not have a stable API within the kernel, including things like: + + - Subsystem shim-layers (for compatibility?) + - Driver portability between Operating Systems. + - Mitigating rapid change within the kernel source tree (or + preventing rapid change) + + This document is crucial for understanding the Linux development + philosophy and is very important for people moving to Linux from + development on other Operating Systems. + + :ref:`Documentation/admin-guide/security-bugs.rst <securitybugs>` + If you feel you have found a security problem in the Linux kernel, + please follow the steps in this document to help notify the kernel + developers, and help solve the issue. + + :ref:`Documentation/process/management-style.rst <managementstyle>` + This document describes how Linux kernel maintainers operate and the + shared ethos behind their methodologies. This is important reading + for anyone new to kernel development (or anyone simply curious about + it), as it resolves a lot of common misconceptions and confusion + about the unique behavior of kernel maintainers. + + :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>` + This file describes the rules on how the stable kernel releases + happen, and what to do if you want to get a change into one of these + releases. + + :ref:`Documentation/process/kernel-docs.rst <kernel_docs>` + A list of external documentation that pertains to kernel + development. Please consult this list if you do not find what you + are looking for within the in-kernel documentation. + + :ref:`Documentation/process/applying-patches.rst <applying_patches>` + A good introduction describing exactly what a patch is and how to + apply it to the different development branches of the kernel. + +The kernel also has a large number of documents that can be +automatically generated from the source code itself or from +ReStructuredText markups (ReST), like this one. This includes a +full description of the in-kernel API, and rules on how to handle +locking properly. + +All such documents can be generated as PDF or HTML by running:: + + make pdfdocs + make htmldocs + +respectively from the main kernel source directory. + +The documents that uses ReST markup will be generated at Documentation/output. +They can also be generated on LaTeX and ePub formats with:: + + make latexdocs + make epubdocs + +Becoming A Kernel Developer +--------------------------- + +If you do not know anything about Linux kernel development, you should +look at the Linux KernelNewbies project: + + https://kernelnewbies.org + +It consists of a helpful mailing list where you can ask almost any type +of basic kernel development question (make sure to search the archives +first, before asking something that has already been answered in the +past.) It also has an IRC channel that you can use to ask questions in +real-time, and a lot of helpful documentation that is useful for +learning about Linux kernel development. + +The website has basic information about code organization, subsystems, +and current projects (both in-tree and out-of-tree). It also describes +some basic logistical information, like how to compile a kernel and +apply a patch. + +If you do not know where you want to start, but you want to look for +some task to start doing to join into the kernel development community, +go to the Linux Kernel Janitor's project: + + https://kernelnewbies.org/KernelJanitors + +It is a great place to start. It describes a list of relatively simple +problems that need to be cleaned up and fixed within the Linux kernel +source tree. Working with the developers in charge of this project, you +will learn the basics of getting your patch into the Linux kernel tree, +and possibly be pointed in the direction of what to go work on next, if +you do not already have an idea. + +Before making any actual modifications to the Linux kernel code, it is +imperative to understand how the code in question works. For this +purpose, nothing is better than reading through it directly (most tricky +bits are commented well), perhaps even with the help of specialized +tools. One such tool that is particularly recommended is the Linux +Cross-Reference project, which is able to present source code in a +self-referential, indexed webpage format. An excellent up-to-date +repository of the kernel code may be found at: + + http://lxr.free-electrons.com/ + + +The development process +----------------------- + +Linux kernel development process currently consists of a few different +main kernel "branches" and lots of different subsystem-specific kernel +branches. These different branches are: + + - main 4.x kernel tree + - 4.x.y -stable kernel tree + - 4.x -git kernel patches + - subsystem specific kernel trees and patches + - the 4.x -next kernel tree for integration tests + +4.x kernel tree +~~~~~~~~~~~~~~~ + +4.x kernels are maintained by Linus Torvalds, and can be found on +https://kernel.org in the pub/linux/kernel/v4.x/ directory. Its development +process is as follows: + + - As soon as a new kernel is released a two weeks window is open, + during this period of time maintainers can submit big diffs to + Linus, usually the patches that have already been included in the + -next kernel for a few weeks. The preferred way to submit big changes + is using git (the kernel's source management tool, more information + can be found at https://git-scm.com/) but plain patches are also just + fine. + - After two weeks a -rc1 kernel is released and the focus is on making the + new kernel as rock solid as possible. Most of the patches at this point + should fix a regression. Bugs that have always existed are not + regressions, so only push these kinds of fixes if they are important. + Please note that a whole new driver (or filesystem) might be accepted + after -rc1 because there is no risk of causing regressions with such a + change as long as the change is self-contained and does not affect areas + outside of the code that is being added. git can be used to send + patches to Linus after -rc1 is released, but the patches need to also be + sent to a public mailing list for review. + - A new -rc is released whenever Linus deems the current git tree to + be in a reasonably sane state adequate for testing. The goal is to + release a new -rc kernel every week. + - Process continues until the kernel is considered "ready", the + process should last around 6 weeks. + +It is worth mentioning what Andrew Morton wrote on the linux-kernel +mailing list about kernel releases: + + *"Nobody knows when a kernel will be released, because it's + released according to perceived bug status, not according to a + preconceived timeline."* + +4.x.y -stable kernel tree +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Kernels with 3-part versions are -stable kernels. They contain +relatively small and critical fixes for security problems or significant +regressions discovered in a given 4.x kernel. + +This is the recommended branch for users who want the most recent stable +kernel and are not interested in helping test development/experimental +versions. + +If no 4.x.y kernel is available, then the highest numbered 4.x +kernel is the current stable kernel. + +4.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and +are released as needs dictate. The normal release period is approximately +two weeks, but it can be longer if there are no pressing problems. A +security-related problem, instead, can cause a release to happen almost +instantly. + +The file Documentation/process/stable-kernel-rules.rst in the kernel tree +documents what kinds of changes are acceptable for the -stable tree, and +how the release process works. + +4.x -git patches +~~~~~~~~~~~~~~~~ + +These are daily snapshots of Linus' kernel tree which are managed in a +git repository (hence the name.) These patches are usually released +daily and represent the current state of Linus' tree. They are more +experimental than -rc kernels since they are generated automatically +without even a cursory glance to see if they are sane. + +Subsystem Specific kernel trees and patches +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The maintainers of the various kernel subsystems --- and also many +kernel subsystem developers --- expose their current state of +development in source repositories. That way, others can see what is +happening in the different areas of the kernel. In areas where +development is rapid, a developer may be asked to base his submissions +onto such a subsystem kernel tree so that conflicts between the +submission and other already ongoing work are avoided. + +Most of these repositories are git trees, but there are also other SCMs +in use, or patch queues being published as quilt series. Addresses of +these subsystem repositories are listed in the MAINTAINERS file. Many +of them can be browsed at https://git.kernel.org/. + +Before a proposed patch is committed to such a subsystem tree, it is +subject to review which primarily happens on mailing lists (see the +respective section below). For several kernel subsystems, this review +process is tracked with the tool patchwork. Patchwork offers a web +interface which shows patch postings, any comments on a patch or +revisions to it, and maintainers can mark patches as under review, +accepted, or rejected. Most of these patchwork sites are listed at +https://patchwork.kernel.org/. + +4.x -next kernel tree for integration tests +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Before updates from subsystem trees are merged into the mainline 4.x +tree, they need to be integration-tested. For this purpose, a special +testing repository exists into which virtually all subsystem trees are +pulled on an almost daily basis: + + https://git.kernel.org/?p=linux/kernel/git/next/linux-next.git + +This way, the -next kernel gives a summary outlook onto what will be +expected to go into the mainline kernel at the next merge period. +Adventurous testers are very welcome to runtime-test the -next kernel. + + +Bug Reporting +------------- + +https://bugzilla.kernel.org is where the Linux kernel developers track kernel +bugs. Users are encouraged to report all bugs that they find in this +tool. For details on how to use the kernel bugzilla, please see: + + https://bugzilla.kernel.org/page.cgi?id=faq.html + +The file admin-guide/reporting-bugs.rst in the main kernel source directory has a good +template for how to report a possible kernel bug, and details what kind +of information is needed by the kernel developers to help track down the +problem. + + +Managing bug reports +-------------------- + +One of the best ways to put into practice your hacking skills is by fixing +bugs reported by other people. Not only you will help to make the kernel +more stable, you'll learn to fix real world problems and you will improve +your skills, and other developers will be aware of your presence. Fixing +bugs is one of the best ways to get merits among other developers, because +not many people like wasting time fixing other people's bugs. + +To work in the already reported bug reports, go to https://bugzilla.kernel.org. + + +Mailing lists +------------- + +As some of the above documents describe, the majority of the core kernel +developers participate on the Linux Kernel Mailing list. Details on how +to subscribe and unsubscribe from the list can be found at: + + http://vger.kernel.org/vger-lists.html#linux-kernel + +There are archives of the mailing list on the web in many different +places. Use a search engine to find these archives. For example: + + http://dir.gmane.org/gmane.linux.kernel + +It is highly recommended that you search the archives about the topic +you want to bring up, before you post it to the list. A lot of things +already discussed in detail are only recorded at the mailing list +archives. + +Most of the individual kernel subsystems also have their own separate +mailing list where they do their development efforts. See the +MAINTAINERS file for a list of what these lists are for the different +groups. + +Many of the lists are hosted on kernel.org. Information on them can be +found at: + + http://vger.kernel.org/vger-lists.html + +Please remember to follow good behavioral habits when using the lists. +Though a bit cheesy, the following URL has some simple guidelines for +interacting with the list (or any list): + + http://www.albion.com/netiquette/ + +If multiple people respond to your mail, the CC: list of recipients may +get pretty large. Don't remove anybody from the CC: list without a good +reason, or don't reply only to the list address. Get used to receiving the +mail twice, one from the sender and the one from the list, and don't try +to tune that by adding fancy mail-headers, people will not like it. + +Remember to keep the context and the attribution of your replies intact, +keep the "John Kernelhacker wrote ...:" lines at the top of your reply, and +add your statements between the individual quoted sections instead of +writing at the top of the mail. + +If you add patches to your mail, make sure they are plain readable text +as stated in Documentation/process/submitting-patches.rst. +Kernel developers don't want to deal with +attachments or compressed patches; they may want to comment on +individual lines of your patch, which works only that way. Make sure you +use a mail program that does not mangle spaces and tab characters. A +good first test is to send the mail to yourself and try to apply your +own patch by yourself. If that doesn't work, get your mail program fixed +or change it until it works. + +Above all, please remember to show respect to other subscribers. + + +Working with the community +-------------------------- + +The goal of the kernel community is to provide the best possible kernel +there is. When you submit a patch for acceptance, it will be reviewed +on its technical merits and those alone. So, what should you be +expecting? + + - criticism + - comments + - requests for change + - requests for justification + - silence + +Remember, this is part of getting your patch into the kernel. You have +to be able to take criticism and comments about your patches, evaluate +them at a technical level and either rework your patches or provide +clear and concise reasoning as to why those changes should not be made. +If there are no responses to your posting, wait a few days and try +again, sometimes things get lost in the huge volume. + +What should you not do? + + - expect your patch to be accepted without question + - become defensive + - ignore comments + - resubmit the patch without making any of the requested changes + +In a community that is looking for the best technical solution possible, +there will always be differing opinions on how beneficial a patch is. +You have to be cooperative, and willing to adapt your idea to fit within +the kernel. Or at least be willing to prove your idea is worth it. +Remember, being wrong is acceptable as long as you are willing to work +toward a solution that is right. + +It is normal that the answers to your first patch might simply be a list +of a dozen things you should correct. This does **not** imply that your +patch will not be accepted, and it is **not** meant against you +personally. Simply correct all issues raised against your patch and +resend it. + + +Differences between the kernel community and corporate structures +----------------------------------------------------------------- + +The kernel community works differently than most traditional corporate +development environments. Here are a list of things that you can try to +do to avoid problems: + + Good things to say regarding your proposed changes: + + - "This solves multiple problems." + - "This deletes 2000 lines of code." + - "Here is a patch that explains what I am trying to describe." + - "I tested it on 5 different architectures..." + - "Here is a series of small patches that..." + - "This increases performance on typical machines..." + + Bad things you should avoid saying: + + - "We did it this way in AIX/ptx/Solaris, so therefore it must be + good..." + - "I've being doing this for 20 years, so..." + - "This is required for my company to make money" + - "This is for our Enterprise product line." + - "Here is my 1000 page design document that describes my idea" + - "I've been working on this for 6 months..." + - "Here's a 5000 line patch that..." + - "I rewrote all of the current mess, and here it is..." + - "I have a deadline, and this patch needs to be applied now." + +Another way the kernel community is different than most traditional +software engineering work environments is the faceless nature of +interaction. One benefit of using email and irc as the primary forms of +communication is the lack of discrimination based on gender or race. +The Linux kernel work environment is accepting of women and minorities +because all you are is an email address. The international aspect also +helps to level the playing field because you can't guess gender based on +a person's name. A man may be named Andrea and a woman may be named Pat. +Most women who have worked in the Linux kernel and have expressed an +opinion have had positive experiences. + +The language barrier can cause problems for some people who are not +comfortable with English. A good grasp of the language can be needed in +order to get ideas across properly on mailing lists, so it is +recommended that you check your emails to make sure they make sense in +English before sending them. + + +Break up your changes +--------------------- + +The Linux kernel community does not gladly accept large chunks of code +dropped on it all at once. The changes need to be properly introduced, +discussed, and broken up into tiny, individual portions. This is almost +the exact opposite of what companies are used to doing. Your proposal +should also be introduced very early in the development process, so that +you can receive feedback on what you are doing. It also lets the +community feel that you are working with them, and not simply using them +as a dumping ground for your feature. However, don't send 50 emails at +one time to a mailing list, your patch series should be smaller than +that almost all of the time. + +The reasons for breaking things up are the following: + +1) Small patches increase the likelihood that your patches will be + applied, since they don't take much time or effort to verify for + correctness. A 5 line patch can be applied by a maintainer with + barely a second glance. However, a 500 line patch may take hours to + review for correctness (the time it takes is exponentially + proportional to the size of the patch, or something). + + Small patches also make it very easy to debug when something goes + wrong. It's much easier to back out patches one by one than it is + to dissect a very large patch after it's been applied (and broken + something). + +2) It's important not only to send small patches, but also to rewrite + and simplify (or simply re-order) patches before submitting them. + +Here is an analogy from kernel developer Al Viro: + + *"Think of a teacher grading homework from a math student. The + teacher does not want to see the student's trials and errors + before they came up with the solution. They want to see the + cleanest, most elegant answer. A good student knows this, and + would never submit her intermediate work before the final + solution.* + + *The same is true of kernel development. The maintainers and + reviewers do not want to see the thought process behind the + solution to the problem one is solving. They want to see a + simple and elegant solution."* + +It may be challenging to keep the balance between presenting an elegant +solution and working together with the community and discussing your +unfinished work. Therefore it is good to get early in the process to +get feedback to improve your work, but also keep your changes in small +chunks that they may get already accepted, even when your whole task is +not ready for inclusion now. + +Also realize that it is not acceptable to send patches for inclusion +that are unfinished and will be "fixed up later." + + +Justify your change +------------------- + +Along with breaking up your patches, it is very important for you to let +the Linux community know why they should add this change. New features +must be justified as being needed and useful. + + +Document your change +-------------------- + +When sending in your patches, pay special attention to what you say in +the text in your email. This information will become the ChangeLog +information for the patch, and will be preserved for everyone to see for +all time. It should describe the patch completely, containing: + + - why the change is necessary + - the overall design approach in the patch + - implementation details + - testing results + +For more details on what this should all look like, please see the +ChangeLog section of the document: + + "The Perfect Patch" + http://www.ozlabs.org/~akpm/stuff/tpp.txt + + +All of these things are sometimes very hard to do. It can take years to +perfect these practices (if at all). It's a continuous process of +improvement that requires a lot of patience and determination. But +don't give up, it's possible. Many have done it before, and each had to +start exactly where you are now. + + + + +---------- + +Thanks to Paolo Ciarrocchi who allowed the "Development Process" +(https://lwn.net/Articles/94386/) section +to be based on text he had written, and to Randy Dunlap and Gerrit +Huizenga for some of the list of things you should and should not say. +Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers, +Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi +Kleen, Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop, +David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard for +their review, comments, and contributions. Without their help, this +document would not have been possible. + + + +Maintainer: Greg Kroah-Hartman <greg@kroah.com> diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst new file mode 100644 index 000000000..42691e288 --- /dev/null +++ b/Documentation/process/index.rst @@ -0,0 +1,63 @@ +.. raw:: latex + + \renewcommand\thesection* + \renewcommand\thesubsection* + +.. _process_index: + +Working with the kernel development community +============================================= + +So you want to be a Linux kernel developer? Welcome! While there is a lot +to be learned about the kernel in a technical sense, it is also important +to learn about how our community works. Reading these documents will make +it much easier for you to get your changes merged with a minimum of +trouble. + +Below are the essential guides that every developer should read. + +.. toctree:: + :maxdepth: 1 + + howto + code-of-conduct + code-of-conduct-interpretation + development-process + submitting-patches + coding-style + maintainer-pgp-guide + email-clients + kernel-enforcement-statement + kernel-driver-statement + +Other guides to the community that are of interest to most developers are: + +.. toctree:: + :maxdepth: 1 + + changes + submitting-drivers + stable-api-nonsense + management-style + stable-kernel-rules + submit-checklist + kernel-docs + +These are some overall technical guides that have been put here for now for +lack of a better place. + +.. toctree:: + :maxdepth: 1 + + applying-patches + adding-syscalls + magic-number + volatile-considered-harmful + clang-format + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/process/kernel-docs.rst b/Documentation/process/kernel-docs.rst new file mode 100644 index 000000000..3fb28de55 --- /dev/null +++ b/Documentation/process/kernel-docs.rst @@ -0,0 +1,620 @@ +.. _kernel_docs: + +Index of Documentation for People Interested in Writing and/or Understanding the Linux Kernel +============================================================================================= + + Juan-Mariano de Goyeneche <jmseyas@dit.upm.es> + +The need for a document like this one became apparent in the +linux-kernel mailing list as the same questions, asking for pointers +to information, appeared again and again. + +Fortunately, as more and more people get to GNU/Linux, more and more +get interested in the Kernel. But reading the sources is not always +enough. It is easy to understand the code, but miss the concepts, the +philosophy and design decisions behind this code. + +Unfortunately, not many documents are available for beginners to +start. And, even if they exist, there was no "well-known" place which +kept track of them. These lines try to cover this lack. All documents +available on line known by the author are listed, while some reference +books are also mentioned. + +PLEASE, if you know any paper not listed here or write a new document, +send me an e-mail, and I'll include a reference to it here. Any +corrections, ideas or comments are also welcomed. + +The papers that follow are listed in no particular order. All are +cataloged with the following fields: the document's "Title", the +"Author"/s, the "URL" where they can be found, some "Keywords" helpful +when searching for specific topics, and a brief "Description" of the +Document. + +Enjoy! + +.. note:: + + The documents on each section of this document are ordered by its + published date, from the newest to the oldest. + +Docs at the Linux Kernel tree +----------------------------- + +The Sphinx books should be built with ``make {htmldocs | pdfdocs | epubdocs}``. + + * Name: **linux/Documentation** + + :Author: Many. + :Location: Documentation/ + :Keywords: text files, Sphinx. + :Description: Documentation that comes with the kernel sources, + inside the Documentation directory. Some pages from this document + (including this document itself) have been moved there, and might + be more up to date than the web version. + +On-line docs +------------ + + * Title: **Linux Kernel Mailing List Glossary** + + :Author: various + :URL: https://kernelnewbies.org/KernelGlossary + :Date: rolling version + :Keywords: glossary, terms, linux-kernel. + :Description: From the introduction: "This glossary is intended as + a brief description of some of the acronyms and terms you may hear + during discussion of the Linux kernel". + + * Title: **Tracing the Way of Data in a TCP Connection through the Linux Kernel** + + :Author: Richard Sailer + :URL: https://archive.org/details/linux_kernel_data_flow_short_paper + :Date: 2016 + :Keywords: Linux Kernel Networking, TCP, tracing, ftrace + :Description: A seminar paper explaining ftrace and how to use it for + understanding linux kernel internals, + illustrated at tracing the way of a TCP packet through the kernel. + :Abstract: *This short paper outlines the usage of ftrace a tracing framework + as a tool to understand a running Linux system. + Having obtained a trace-log a kernel hacker can read and understand + source code more determined and with context. + In a detailed example this approach is demonstrated in tracing + and the way of data in a TCP Connection through the kernel. + Finally this trace-log is used as base for more a exact conceptual + exploration and description of the Linux TCP/IP implementation.* + + * Title: **On submitting kernel Patches** + + :Author: Andi Kleen + :URL: http://halobates.de/on-submitting-kernel-patches.pdf + :Date: 2008 + :Keywords: patches, review process, types of submissions, basic rules, case studies + :Description: This paper gives several experience values on what types of patches + there are and how likley they get merged. + :Abstract: + [...]. This paper examines some common problems for + submitting larger changes and some strategies to avoid problems. + + * Title: **Overview of the Virtual File System** + + :Author: Richard Gooch. + :URL: http://www.mjmwired.net/kernel/Documentation/filesystems/vfs.txt + :Date: 2007 + :Keywords: VFS, File System, mounting filesystems, opening files, + dentries, dcache. + :Description: Brief introduction to the Linux Virtual File System. + What is it, how it works, operations taken when opening a file or + mounting a file system and description of important data + structures explaining the purpose of each of their entries. + + * Title: **Linux Device Drivers, Third Edition** + + :Author: Jonathan Corbet, Alessandro Rubini, Greg Kroah-Hartman + :URL: http://lwn.net/Kernel/LDD3/ + :Date: 2005 + :Description: A 600-page book covering the (2.6.10) driver + programming API and kernel hacking in general. Available under the + Creative Commons Attribution-ShareAlike 2.0 license. + :note: You can also :ref:`purchase a copy from O'Reilly or elsewhere <ldd3_published>`. + + * Title: **Writing an ALSA Driver** + + :Author: Takashi Iwai <tiwai@suse.de> + :URL: http://www.alsa-project.org/~iwai/writing-an-alsa-driver/index.html + :Date: 2005 + :Keywords: ALSA, sound, soundcard, driver, lowlevel, hardware. + :Description: Advanced Linux Sound Architecture for developers, + both at kernel and user-level sides. ALSA is the Linux kernel + sound architecture in the 2.6 kernel version. + + * Title: **Linux PCMCIA Programmer's Guide** + + :Author: David Hinds. + :URL: http://pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-PROG.html + :Date: 2003 + :Keywords: PCMCIA. + :Description: "This document describes how to write kernel device + drivers for the Linux PCMCIA Card Services interface. It also + describes how to write user-mode utilities for communicating with + Card Services. + + * Title: **Linux Kernel Module Programming Guide** + + :Author: Ori Pomerantz. + :URL: http://tldp.org/LDP/lkmpg/2.6/html/index.html + :Date: 2001 + :Keywords: modules, GPL book, /proc, ioctls, system calls, + interrupt handlers . + :Description: Very nice 92 pages GPL book on the topic of modules + programming. Lots of examples. + + * Title: **Global spinlock list and usage** + + :Author: Rick Lindsley. + :URL: http://lse.sourceforge.net/lockhier/global-spin-lock + :Date: 2001 + :Keywords: spinlock. + :Description: This is an attempt to document both the existence and + usage of the spinlocks in the Linux 2.4.5 kernel. Comprehensive + list of spinlocks showing when they are used, which functions + access them, how each lock is acquired, under what conditions it + is held, whether interrupts can occur or not while it is held... + + * Title: **A Linux vm README** + + :Author: Kanoj Sarcar. + :URL: http://kos.enix.org/pub/linux-vmm.html + :Date: 2001 + :Keywords: virtual memory, mm, pgd, vma, page, page flags, page + cache, swap cache, kswapd. + :Description: Telegraphic, short descriptions and definitions + relating the Linux virtual memory implementation. + + * Title: **Video4linux Drivers, Part 1: Video-Capture Device** + + :Author: Alan Cox. + :URL: http://www.linux-mag.com/id/406 + :Date: 2000 + :Keywords: video4linux, driver, video capture, capture devices, + camera driver. + :Description: The title says it all. + + * Title: **Video4linux Drivers, Part 2: Video-capture Devices** + + :Author: Alan Cox. + :URL: http://www.linux-mag.com/id/429 + :Date: 2000 + :Keywords: video4linux, driver, video capture, capture devices, + camera driver, control, query capabilities, capability, facility. + :Description: The title says it all. + + * Title: **Linux IP Networking. A Guide to the Implementation and Modification of the Linux Protocol Stack.** + + :Author: Glenn Herrin. + :URL: http://www.cs.unh.edu/cnrg/gherrin + :Date: 2000 + :Keywords: network, networking, protocol, IP, UDP, TCP, connection, + socket, receiving, transmitting, forwarding, routing, packets, + modules, /proc, sk_buff, FIB, tags. + :Description: Excellent paper devoted to the Linux IP Networking, + explaining anything from the kernel's to the user space + configuration tools' code. Very good to get a general overview of + the kernel networking implementation and understand all steps + packets follow from the time they are received at the network + device till they are delivered to applications. The studied kernel + code is from 2.2.14 version. Provides code for a working packet + dropper example. + + * Title: **How To Make Sure Your Driver Will Work On The Power Macintosh** + + :Author: Paul Mackerras. + :URL: http://www.linux-mag.com/id/261 + :Date: 1999 + :Keywords: Mac, Power Macintosh, porting, drivers, compatibility. + :Description: The title says it all. + + * Title: **An Introduction to SCSI Drivers** + + :Author: Alan Cox. + :URL: http://www.linux-mag.com/id/284 + :Date: 1999 + :Keywords: SCSI, device, driver. + :Description: The title says it all. + + * Title: **Advanced SCSI Drivers And Other Tales** + + :Author: Alan Cox. + :URL: http://www.linux-mag.com/id/307 + :Date: 1999 + :Keywords: SCSI, device, driver, advanced. + :Description: The title says it all. + + * Title: **Writing Linux Mouse Drivers** + + :Author: Alan Cox. + :URL: http://www.linux-mag.com/id/330 + :Date: 1999 + :Keywords: mouse, driver, gpm. + :Description: The title says it all. + + * Title: **More on Mouse Drivers** + + :Author: Alan Cox. + :URL: http://www.linux-mag.com/id/356 + :Date: 1999 + :Keywords: mouse, driver, gpm, races, asynchronous I/O. + :Description: The title still says it all. + + * Title: **Writing Video4linux Radio Driver** + + :Author: Alan Cox. + :URL: http://www.linux-mag.com/id/381 + :Date: 1999 + :Keywords: video4linux, driver, radio, radio devices. + :Description: The title says it all. + + * Title: **I/O Event Handling Under Linux** + + :Author: Richard Gooch. + :URL: http://web.mit.edu/~yandros/doc/io-events.html + :Date: 1999 + :Keywords: IO, I/O, select(2), poll(2), FDs, aio_read(2), readiness + event queues. + :Description: From the Introduction: "I/O Event handling is about + how your Operating System allows you to manage a large number of + open files (file descriptors in UNIX/POSIX, or FDs) in your + application. You want the OS to notify you when FDs become active + (have data ready to be read or are ready for writing). Ideally you + want a mechanism that is scalable. This means a large number of + inactive FDs cost very little in memory and CPU time to manage". + + * Title: **(nearly) Complete Linux Loadable Kernel Modules. The definitive guide for hackers, virus coders and system administrators.** + + :Author: pragmatic/THC. + :URL: http://packetstormsecurity.org/docs/hack/LKM_HACKING.html + :Date: 1999 + :Keywords: syscalls, intercept, hide, abuse, symbol table. + :Description: Interesting paper on how to abuse the Linux kernel in + order to intercept and modify syscalls, make + files/directories/processes invisible, become root, hijack ttys, + write kernel modules based virus... and solutions for admins to + avoid all those abuses. + :Notes: For 2.0.x kernels. Gives guidances to port it to 2.2.x + kernels. + + * Name: **Linux Virtual File System** + + :Author: Peter J. Braam. + :URL: http://www.coda.cs.cmu.edu/doc/talks/linuxvfs/ + :Date: 1998 + :Keywords: slides, VFS, inode, superblock, dentry, dcache. + :Description: Set of slides, presumably from a presentation on the + Linux VFS layer. Covers version 2.1.x, with dentries and the + dcache. + + * Title: **The Venus kernel interface** + + :Author: Peter J. Braam. + :URL: http://www.coda.cs.cmu.edu/doc/html/kernel-venus-protocol.html + :Date: 1998 + :Keywords: coda, filesystem, venus, cache manager. + :Description: "This document describes the communication between + Venus and kernel level file system code needed for the operation + of the Coda filesystem. This version document is meant to describe + the current interface (version 1.0) as well as improvements we + envisage". + + * Title: **Design and Implementation of the Second Extended Filesystem** + + :Author: Rémy Card, Theodore Ts'o, Stephen Tweedie. + :URL: http://web.mit.edu/tytso/www/linux/ext2intro.html + :Date: 1998 + :Keywords: ext2, linux fs history, inode, directory, link, devices, + VFS, physical structure, performance, benchmarks, ext2fs library, + ext2fs tools, e2fsck. + :Description: Paper written by three of the top ext2 hackers. + Covers Linux filesystems history, ext2 motivation, ext2 features, + design, physical structure on disk, performance, benchmarks, + e2fsck's passes description... A must read! + :Notes: This paper was first published in the Proceedings of the + First Dutch International Symposium on Linux, ISBN 90-367-0385-9. + + * Title: **The Linux RAID-1, 4, 5 Code** + + :Author: Ingo Molnar, Gadi Oxman and Miguel de Icaza. + :URL: http://www.linuxjournal.com/article.php?sid=2391 + :Date: 1997 + :Keywords: RAID, MD driver. + :Description: Linux Journal Kernel Korner article. Here is its + :Abstract: *A description of the implementation of the RAID-1, + RAID-4 and RAID-5 personalities of the MD device driver in the + Linux kernel, providing users with high performance and reliable, + secondary-storage capability using software*. + + * Title: **Linux Kernel Hackers' Guide** + + :Author: Michael K. Johnson. + :URL: http://www.tldp.org/LDP/khg/HyperNews/get/khg.html + :Date: 1997 + :Keywords: device drivers, files, VFS, kernel interface, character vs + block devices, hardware interrupts, scsi, DMA, access to user memory, + memory allocation, timers. + :Description: A guide designed to help you get up to speed on the + concepts that are not intuitevly obvious, and to document the internal + structures of Linux. + + * Title: **Dynamic Kernels: Modularized Device Drivers** + + :Author: Alessandro Rubini. + :URL: http://www.linuxjournal.com/article.php?sid=1219 + :Date: 1996 + :Keywords: device driver, module, loading/unloading modules, + allocating resources. + :Description: Linux Journal Kernel Korner article. Here is its + :Abstract: *This is the first of a series of four articles + co-authored by Alessandro Rubini and Georg Zezchwitz which present + a practical approach to writing Linux device drivers as kernel + loadable modules. This installment presents an introduction to the + topic, preparing the reader to understand next month's + installment*. + + * Title: **Dynamic Kernels: Discovery** + + :Author: Alessandro Rubini. + :URL: http://www.linuxjournal.com/article.php?sid=1220 + :Date: 1996 + :Keywords: character driver, init_module, clean_up module, + autodetection, mayor number, minor number, file operations, + open(), close(). + :Description: Linux Journal Kernel Korner article. Here is its + :Abstract: *This article, the second of four, introduces part of + the actual code to create custom module implementing a character + device driver. It describes the code for module initialization and + cleanup, as well as the open() and close() system calls*. + + * Title: **The Devil's in the Details** + + :Author: Georg v. Zezschwitz and Alessandro Rubini. + :URL: http://www.linuxjournal.com/article.php?sid=1221 + :Date: 1996 + :Keywords: read(), write(), select(), ioctl(), blocking/non + blocking mode, interrupt handler. + :Description: Linux Journal Kernel Korner article. Here is its + :Abstract: *This article, the third of four on writing character + device drivers, introduces concepts of reading, writing, and using + ioctl-calls*. + + * Title: **Dissecting Interrupts and Browsing DMA** + + :Author: Alessandro Rubini and Georg v. Zezschwitz. + :URL: http://www.linuxjournal.com/article.php?sid=1222 + :Date: 1996 + :Keywords: interrupts, irqs, DMA, bottom halves, task queues. + :Description: Linux Journal Kernel Korner article. Here is its + :Abstract: *This is the fourth in a series of articles about + writing character device drivers as loadable kernel modules. This + month, we further investigate the field of interrupt handling. + Though it is conceptually simple, practical limitations and + constraints make this an ''interesting'' part of device driver + writing, and several different facilities have been provided for + different situations. We also investigate the complex topic of + DMA*. + + * Title: **Device Drivers Concluded** + + :Author: Georg v. Zezschwitz. + :URL: http://www.linuxjournal.com/article.php?sid=1287 + :Date: 1996 + :Keywords: address spaces, pages, pagination, page management, + demand loading, swapping, memory protection, memory mapping, mmap, + virtual memory areas (VMAs), vremap, PCI. + :Description: Finally, the above turned out into a five articles + series. This latest one's introduction reads: "This is the last of + five articles about character device drivers. In this final + section, Georg deals with memory mapping devices, beginning with + an overall description of the Linux memory management concepts". + + * Title: **Network Buffers And Memory Management** + + :Author: Alan Cox. + :URL: http://www.linuxjournal.com/article.php?sid=1312 + :Date: 1996 + :Keywords: sk_buffs, network devices, protocol/link layer + variables, network devices flags, transmit, receive, + configuration, multicast. + :Description: Linux Journal Kernel Korner. + :Abstract: *Writing a network device driver for Linux is fundamentally + simple---most of the complexity (other than talking to the + hardware) involves managing network packets in memory*. + + * Title: **Analysis of the Ext2fs structure** + + :Author: Louis-Dominique Dubeau. + :URL: http://teaching.csse.uwa.edu.au/units/CITS2002/fs-ext2/ + :Date: 1994 + :Keywords: ext2, filesystem, ext2fs. + :Description: Description of ext2's blocks, directories, inodes, + bitmaps, invariants... + +Published books +--------------- + + * Title: **Linux Treiber entwickeln** + + :Author: Jürgen Quade, Eva-Katharina Kunst + :Publisher: dpunkt.verlag + :Date: Oct 2015 (4th edition) + :Pages: 688 + :ISBN: 978-3-86490-288-8 + :Note: German. The third edition from 2011 is + much cheaper and still quite up-to-date. + + * Title: **Linux Kernel Networking: Implementation and Theory** + + :Author: Rami Rosen + :Publisher: Apress + :Date: December 22, 2013 + :Pages: 648 + :ISBN: 978-1430261964 + + * Title: **Embedded Linux Primer: A practical Real-World Approach, 2nd Edition** + + :Author: Christopher Hallinan + :Publisher: Pearson + :Date: November, 2010 + :Pages: 656 + :ISBN: 978-0137017836 + + * Title: **Linux Kernel Development, 3rd Edition** + + :Author: Robert Love + :Publisher: Addison-Wesley + :Date: July, 2010 + :Pages: 440 + :ISBN: 978-0672329463 + + * Title: **Essential Linux Device Drivers** + + :Author: Sreekrishnan Venkateswaran + :Published: Prentice Hall + :Date: April, 2008 + :Pages: 744 + :ISBN: 978-0132396554 + +.. _ldd3_published: + + * Title: **Linux Device Drivers, 3rd Edition** + + :Authors: Jonathan Corbet, Alessandro Rubini, and Greg Kroah-Hartman + :Publisher: O'Reilly & Associates + :Date: 2005 + :Pages: 636 + :ISBN: 0-596-00590-3 + :Notes: Further information in + http://www.oreilly.com/catalog/linuxdrive3/ + PDF format, URL: http://lwn.net/Kernel/LDD3/ + + * Title: **Linux Kernel Internals** + + :Author: Michael Beck + :Publisher: Addison-Wesley + :Date: 1997 + :ISBN: 0-201-33143-8 (second edition) + + * Title: **Programmation Linux 2.0 API systeme et fonctionnement du noyau** + + :Author: Remy Card, Eric Dumas, Franck Mevel + :Publisher: Eyrolles + :Date: 1997 + :Pages: 520 + :ISBN: 2-212-08932-5 + :Notes: French + + * Title: **The Design and Implementation of the 4.4 BSD UNIX Operating System** + + :Author: Marshall Kirk McKusick, Keith Bostic, Michael J. Karels, + John S. Quarterman + :Publisher: Addison-Wesley + :Date: 1996 + :ISBN: 0-201-54979-4 + + * Title: **Unix internals -- the new frontiers** + + :Author: Uresh Vahalia + :Publisher: Prentice Hall + :Date: 1996 + :Pages: 600 + :ISBN: 0-13-101908-2 + + * Title: **Programming for the real world - POSIX.4** + + :Author: Bill O. Gallmeister + :Publisher: O'Reilly & Associates, Inc + :Date: 1995 + :Pages: 552 + :ISBN: I-56592-074-0 + :Notes: Though not being directly about Linux, Linux aims to be + POSIX. Good reference. + + * Title: **UNIX Systems for Modern Architectures: Symmetric Multiprocessing and Caching for Kernel Programmers** + + :Author: Curt Schimmel + :Publisher: Addison Wesley + :Date: June, 1994 + :Pages: 432 + :ISBN: 0-201-63338-8 + + * Title: **The Design and Implementation of the 4.3 BSD UNIX Operating System** + + :Author: Samuel J. Leffler, Marshall Kirk McKusick, Michael J + Karels, John S. Quarterman + :Publisher: Addison-Wesley + :Date: 1989 (reprinted with corrections on October, 1990) + :ISBN: 0-201-06196-1 + + * Title: **The Design of the UNIX Operating System** + + :Author: Maurice J. Bach + :Publisher: Prentice Hall + :Date: 1986 + :Pages: 471 + :ISBN: 0-13-201757-1 + +Miscellaneous +------------- + + * Name: **Cross-Referencing Linux** + + :URL: http://lxr.free-electrons.com/ + :Keywords: Browsing source code. + :Description: Another web-based Linux kernel source code browser. + Lots of cross references to variables and functions. You can see + where they are defined and where they are used. + + * Name: **Linux Weekly News** + + :URL: http://lwn.net + :Keywords: latest kernel news. + :Description: The title says it all. There's a fixed kernel section + summarizing developers' work, bug fixes, new features and versions + produced during the week. Published every Thursday. + + * Name: **The home page of Linux-MM** + + :Author: The Linux-MM team. + :URL: http://linux-mm.org/ + :Keywords: memory management, Linux-MM, mm patches, TODO, docs, + mailing list. + :Description: Site devoted to Linux Memory Management development. + Memory related patches, HOWTOs, links, mm developers... Don't miss + it if you are interested in memory management development! + + * Name: **Kernel Newbies IRC Channel and Website** + + :URL: http://www.kernelnewbies.org + :Keywords: IRC, newbies, channel, asking doubts. + :Description: #kernelnewbies on irc.oftc.net. + #kernelnewbies is an IRC network dedicated to the 'newbie' + kernel hacker. The audience mostly consists of people who are + learning about the kernel, working on kernel projects or + professional kernel hackers that want to help less seasoned kernel + people. + #kernelnewbies is on the OFTC IRC Network. + Try irc.oftc.net as your server and then /join #kernelnewbies. + The kernelnewbies website also hosts articles, documents, FAQs... + + * Name: **linux-kernel mailing list archives and search engines** + + :URL: http://vger.kernel.org/vger-lists.html + :URL: http://www.uwsg.indiana.edu/hypermail/linux/kernel/index.html + :URL: http://groups.google.com/group/mlist.linux.kernel + :Keywords: linux-kernel, archives, search. + :Description: Some of the linux-kernel mailing list archivers. If + you have a better/another one, please let me know. + +------- + +Document last updated on Tue 2016-Sep-20 + +This document is based on: + http://www.dit.upm.es/~jmseyas/linux/kernel/hackers-docs.html diff --git a/Documentation/process/kernel-driver-statement.rst b/Documentation/process/kernel-driver-statement.rst new file mode 100644 index 000000000..e78452c21 --- /dev/null +++ b/Documentation/process/kernel-driver-statement.rst @@ -0,0 +1,200 @@ +Kernel Driver Statement +----------------------- + +Position Statement on Linux Kernel Modules +========================================== + + +We, the undersigned Linux kernel developers, consider any closed-source +Linux kernel module or driver to be harmful and undesirable. We have +repeatedly found them to be detrimental to Linux users, businesses, and +the greater Linux ecosystem. Such modules negate the openness, +stability, flexibility, and maintainability of the Linux development +model and shut their users off from the expertise of the Linux +community. Vendors that provide closed-source kernel modules force their +customers to give up key Linux advantages or choose new vendors. +Therefore, in order to take full advantage of the cost savings and +shared support benefits open source has to offer, we urge vendors to +adopt a policy of supporting their customers on Linux with open-source +kernel code. + +We speak only for ourselves, and not for any company we might work for +today, have in the past, or will in the future. + + - Dave Airlie + - Nick Andrew + - Jens Axboe + - Ralf Baechle + - Felipe Balbi + - Ohad Ben-Cohen + - Muli Ben-Yehuda + - Jiri Benc + - Arnd Bergmann + - Thomas Bogendoerfer + - Vitaly Bordug + - James Bottomley + - Josh Boyer + - Neil Brown + - Mark Brown + - David Brownell + - Michael Buesch + - Franck Bui-Huu + - Adrian Bunk + - François Cami + - Ralph Campbell + - Luiz Fernando N. Capitulino + - Mauro Carvalho Chehab + - Denis Cheng + - Jonathan Corbet + - Glauber Costa + - Alan Cox + - Magnus Damm + - Ahmed S. Darwish + - Robert P. J. Day + - Hans de Goede + - Arnaldo Carvalho de Melo + - Helge Deller + - Jean Delvare + - Mathieu Desnoyers + - Sven-Thorsten Dietrich + - Alexey Dobriyan + - Daniel Drake + - Alex Dubov + - Randy Dunlap + - Michael Ellerman + - Pekka Enberg + - Jan Engelhardt + - Mark Fasheh + - J. Bruce Fields + - Larry Finger + - Jeremy Fitzhardinge + - Mike Frysinger + - Kumar Gala + - Robin Getz + - Liam Girdwood + - Jan-Benedict Glaw + - Thomas Gleixner + - Brice Goglin + - Cyrill Gorcunov + - Andy Gospodarek + - Thomas Graf + - Krzysztof Halasa + - Harvey Harrison + - Stephen Hemminger + - Michael Hennerich + - Tejun Heo + - Benjamin Herrenschmidt + - Kristian Høgsberg + - Henrique de Moraes Holschuh + - Marcel Holtmann + - Mike Isely + - Takashi Iwai + - Olof Johansson + - Dave Jones + - Jesper Juhl + - Matthias Kaehlcke + - Kenji Kaneshige + - Jan Kara + - Jeremy Kerr + - Russell King + - Olaf Kirch + - Roel Kluin + - Hans-Jürgen Koch + - Auke Kok + - Peter Korsgaard + - Jiri Kosina + - Aaro Koskinen + - Mariusz Kozlowski + - Greg Kroah-Hartman + - Michael Krufky + - Aneesh Kumar + - Clemens Ladisch + - Christoph Lameter + - Gunnar Larisch + - Anders Larsen + - Grant Likely + - John W. Linville + - Yinghai Lu + - Tony Luck + - Pavel Machek + - Matt Mackall + - Paul Mackerras + - Roland McGrath + - Patrick McHardy + - Kyle McMartin + - Paul Menage + - Thierry Merle + - Eric Miao + - Akinobu Mita + - Ingo Molnar + - James Morris + - Andrew Morton + - Paul Mundt + - Oleg Nesterov + - Luca Olivetti + - S.Çağlar Onur + - Pierre Ossman + - Keith Owens + - Venkatesh Pallipadi + - Nick Piggin + - Nicolas Pitre + - Evgeniy Polyakov + - Richard Purdie + - Mike Rapoport + - Sam Ravnborg + - Gerrit Renker + - Stefan Richter + - David Rientjes + - Luis R. Rodriguez + - Stefan Roese + - Francois Romieu + - Rami Rosen + - Stephen Rothwell + - Maciej W. Rozycki + - Mark Salyzyn + - Yoshinori Sato + - Deepak Saxena + - Holger Schurig + - Amit Shah + - Yoshihiro Shimoda + - Sergei Shtylyov + - Kay Sievers + - Sebastian Siewior + - Rik Snel + - Jes Sorensen + - Alexey Starikovskiy + - Alan Stern + - Timur Tabi + - Hirokazu Takata + - Eliezer Tamir + - Eugene Teo + - Doug Thompson + - FUJITA Tomonori + - Dmitry Torokhov + - Marcelo Tosatti + - Steven Toth + - Theodore Tso + - Matthias Urlichs + - Geert Uytterhoeven + - Arjan van de Ven + - Ivo van Doorn + - Rik van Riel + - Wim Van Sebroeck + - Hans Verkuil + - Horst H. von Brand + - Dmitri Vorobiev + - Anton Vorontsov + - Daniel Walker + - Johannes Weiner + - Harald Welte + - Matthew Wilcox + - Dan J. Williams + - Darrick J. Wong + - David Woodhouse + - Chris Wright + - Bryan Wu + - Rafael J. Wysocki + - Herbert Xu + - Vlad Yasevich + - Peter Zijlstra + - Bartlomiej Zolnierkiewicz diff --git a/Documentation/process/kernel-enforcement-statement.rst b/Documentation/process/kernel-enforcement-statement.rst new file mode 100644 index 000000000..6816c12d6 --- /dev/null +++ b/Documentation/process/kernel-enforcement-statement.rst @@ -0,0 +1,161 @@ +Linux Kernel Enforcement Statement +---------------------------------- + +As developers of the Linux kernel, we have a keen interest in how our software +is used and how the license for our software is enforced. Compliance with the +reciprocal sharing obligations of GPL-2.0 is critical to the long-term +sustainability of our software and community. + +Although there is a right to enforce the separate copyright interests in the +contributions made to our community, we share an interest in ensuring that +individual enforcement actions are conducted in a manner that benefits our +community and do not have an unintended negative impact on the health and +growth of our software ecosystem. In order to deter unhelpful enforcement +actions, we agree that it is in the best interests of our development +community to undertake the following commitment to users of the Linux kernel +on behalf of ourselves and any successors to our copyright interests: + + Notwithstanding the termination provisions of the GPL-2.0, we agree that + it is in the best interests of our development community to adopt the + following provisions of GPL-3.0 as additional permissions under our + license with respect to any non-defensive assertion of rights under the + license. + + However, if you cease all violation of this License, then your license + from a particular copyright holder is reinstated (a) provisionally, + unless and until the copyright holder explicitly and finally + terminates your license, and (b) permanently, if the copyright holder + fails to notify you of the violation by some reasonable means prior to + 60 days after the cessation. + + Moreover, your license from a particular copyright holder is + reinstated permanently if the copyright holder notifies you of the + violation by some reasonable means, this is the first time you have + received notice of violation of this License (for any work) from that + copyright holder, and you cure the violation prior to 30 days after + your receipt of the notice. + +Our intent in providing these assurances is to encourage more use of the +software. We want companies and individuals to use, modify and distribute +this software. We want to work with users in an open and transparent way to +eliminate any uncertainty about our expectations regarding compliance or +enforcement that might limit adoption of our software. We view legal action +as a last resort, to be initiated only when other community efforts have +failed to resolve the problem. + +Finally, once a non-compliance issue is resolved, we hope the user will feel +welcome to join us in our efforts on this project. Working together, we will +be stronger. + +Except where noted below, we speak only for ourselves, and not for any company +we might work for today, have in the past, or will in the future. + + - Laura Abbott + - Bjorn Andersson (Linaro) + - Andrea Arcangeli + - Neil Armstrong + - Jens Axboe + - Pablo Neira Ayuso + - Khalid Aziz + - Ralf Baechle + - Felipe Balbi + - Arnd Bergmann + - Ard Biesheuvel + - Tim Bird + - Paolo Bonzini + - Christian Borntraeger + - Mark Brown (Linaro) + - Paul Burton + - Javier Martinez Canillas + - Rob Clark + - Kees Cook (Google) + - Jonathan Corbet + - Dennis Dalessandro + - Vivien Didelot (Savoir-faire Linux) + - Hans de Goede + - Mel Gorman (SUSE) + - Sven Eckelmann + - Alex Elder (Linaro) + - Fabio Estevam + - Larry Finger + - Bhumika Goyal + - Andy Gross + - Juergen Gross + - Shawn Guo + - Ulf Hansson + - Stephen Hemminger (Microsoft) + - Tejun Heo + - Rob Herring + - Masami Hiramatsu + - Michal Hocko + - Simon Horman + - Johan Hovold (Hovold Consulting AB) + - Christophe JAILLET + - Olof Johansson + - Lee Jones (Linaro) + - Heiner Kallweit + - Srinivas Kandagatla + - Jan Kara + - Shuah Khan (Samsung) + - David Kershner + - Jaegeuk Kim + - Namhyung Kim + - Colin Ian King + - Jeff Kirsher + - Greg Kroah-Hartman (Linux Foundation) + - Christian König + - Vinod Koul + - Krzysztof Kozlowski + - Viresh Kumar + - Aneesh Kumar K.V + - Julia Lawall + - Doug Ledford + - Chuck Lever (Oracle) + - Daniel Lezcano + - Shaohua Li + - Xin Long + - Tony Luck + - Catalin Marinas (Arm Ltd) + - Mike Marshall + - Chris Mason + - Paul E. McKenney + - Arnaldo Carvalho de Melo + - David S. Miller + - Ingo Molnar + - Kuninori Morimoto + - Trond Myklebust + - Martin K. Petersen (Oracle) + - Borislav Petkov + - Jiri Pirko + - Josh Poimboeuf + - Sebastian Reichel (Collabora) + - Guenter Roeck + - Joerg Roedel + - Leon Romanovsky + - Steven Rostedt (VMware) + - Frank Rowand + - Ivan Safonov + - Anna Schumaker + - Jes Sorensen + - K.Y. Srinivasan + - David Sterba (SUSE) + - Heiko Stuebner + - Jiri Kosina (SUSE) + - Willy Tarreau + - Dmitry Torokhov + - Linus Torvalds + - Thierry Reding + - Rik van Riel + - Luis R. Rodriguez + - Geert Uytterhoeven (Glider bvba) + - Eduardo Valentin (Amazon.com) + - Daniel Vetter + - Linus Walleij + - Richard Weinberger + - Dan Williams + - Rafael J. Wysocki + - Arvind Yadav + - Masahiro Yamada + - Wei Yongjun + - Lv Zheng + - Marc Zyngier (Arm Ltd) diff --git a/Documentation/process/license-rules.rst b/Documentation/process/license-rules.rst new file mode 100644 index 000000000..8ea26325f --- /dev/null +++ b/Documentation/process/license-rules.rst @@ -0,0 +1,372 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Linux kernel licensing rules +============================ + +The Linux Kernel is provided under the terms of the GNU General Public +License version 2 only (GPL-2.0), as provided in LICENSES/preferred/GPL-2.0, +with an explicit syscall exception described in +LICENSES/exceptions/Linux-syscall-note, as described in the COPYING file. + +This documentation file provides a description of how each source file +should be annotated to make its license clear and unambiguous. +It doesn't replace the Kernel's license. + +The license described in the COPYING file applies to the kernel source +as a whole, though individual source files can have a different license +which is required to be compatible with the GPL-2.0:: + + GPL-1.0+ : GNU General Public License v1.0 or later + GPL-2.0+ : GNU General Public License v2.0 or later + LGPL-2.0 : GNU Library General Public License v2 only + LGPL-2.0+ : GNU Library General Public License v2 or later + LGPL-2.1 : GNU Lesser General Public License v2.1 only + LGPL-2.1+ : GNU Lesser General Public License v2.1 or later + +Aside from that, individual files can be provided under a dual license, +e.g. one of the compatible GPL variants and alternatively under a +permissive license like BSD, MIT etc. + +The User-space API (UAPI) header files, which describe the interface of +user-space programs to the kernel are a special case. According to the +note in the kernel COPYING file, the syscall interface is a clear boundary, +which does not extend the GPL requirements to any software which uses it to +communicate with the kernel. Because the UAPI headers must be includable +into any source files which create an executable running on the Linux +kernel, the exception must be documented by a special license expression. + +The common way of expressing the license of a source file is to add the +matching boilerplate text into the top comment of the file. Due to +formatting, typos etc. these "boilerplates" are hard to validate for +tools which are used in the context of license compliance. + +An alternative to boilerplate text is the use of Software Package Data +Exchange (SPDX) license identifiers in each source file. SPDX license +identifiers are machine parsable and precise shorthands for the license +under which the content of the file is contributed. SPDX license +identifiers are managed by the SPDX Workgroup at the Linux Foundation and +have been agreed on by partners throughout the industry, tool vendors, and +legal teams. For further information see https://spdx.org/ + +The Linux kernel requires the precise SPDX identifier in all source files. +The valid identifiers used in the kernel are explained in the section +`License identifiers`_ and have been retrieved from the official SPDX +license list at https://spdx.org/licenses/ along with the license texts. + +License identifier syntax +------------------------- + +1. Placement: + + The SPDX license identifier in kernel files shall be added at the first + possible line in a file which can contain a comment. For the majority + or files this is the first line, except for scripts which require the + '#!PATH_TO_INTERPRETER' in the first line. For those scripts the SPDX + identifier goes into the second line. + +| + +2. Style: + + The SPDX license identifier is added in form of a comment. The comment + style depends on the file type:: + + C source: // SPDX-License-Identifier: <SPDX License Expression> + C header: /* SPDX-License-Identifier: <SPDX License Expression> */ + ASM: /* SPDX-License-Identifier: <SPDX License Expression> */ + scripts: # SPDX-License-Identifier: <SPDX License Expression> + .rst: .. SPDX-License-Identifier: <SPDX License Expression> + .dts{i}: // SPDX-License-Identifier: <SPDX License Expression> + + If a specific tool cannot handle the standard comment style, then the + appropriate comment mechanism which the tool accepts shall be used. This + is the reason for having the "/\* \*/" style comment in C header + files. There was build breakage observed with generated .lds files where + 'ld' failed to parse the C++ comment. This has been fixed by now, but + there are still older assembler tools which cannot handle C++ style + comments. + +| + +3. Syntax: + + A <SPDX License Expression> is either an SPDX short form license + identifier found on the SPDX License List, or the combination of two + SPDX short form license identifiers separated by "WITH" when a license + exception applies. When multiple licenses apply, an expression consists + of keywords "AND", "OR" separating sub-expressions and surrounded by + "(", ")" . + + License identifiers for licenses like [L]GPL with the 'or later' option + are constructed by using a "+" for indicating the 'or later' option.:: + + // SPDX-License-Identifier: GPL-2.0+ + // SPDX-License-Identifier: LGPL-2.1+ + + WITH should be used when there is a modifier to a license needed. + For example, the linux kernel UAPI files use the expression:: + + // SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note + // SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note + + Other examples using WITH exceptions found in the kernel are:: + + // SPDX-License-Identifier: GPL-2.0 WITH mif-exception + // SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0 + + Exceptions can only be used with particular License identifiers. The + valid License identifiers are listed in the tags of the exception text + file. For details see the point `Exceptions`_ in the chapter `License + identifiers`_. + + OR should be used if the file is dual licensed and only one license is + to be selected. For example, some dtsi files are available under dual + licenses:: + + // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause + + Examples from the kernel for license expressions in dual licensed files:: + + // SPDX-License-Identifier: GPL-2.0 OR MIT + // SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause + // SPDX-License-Identifier: GPL-2.0 OR Apache-2.0 + // SPDX-License-Identifier: GPL-2.0 OR MPL-1.1 + // SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR MIT + // SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause OR OpenSSL + + AND should be used if the file has multiple licenses whose terms all + apply to use the file. For example, if code is inherited from another + project and permission has been given to put it in the kernel, but the + original license terms need to remain in effect:: + + // SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) AND MIT + + Another other example where both sets of license terms need to be + adhered to is:: + + // SPDX-License-Identifier: GPL-1.0+ AND LGPL-2.1+ + +License identifiers +------------------- + +The licenses currently used, as well as the licenses for code added to the +kernel, can be broken down into: + +1. _`Preferred licenses`: + + Whenever possible these licenses should be used as they are known to be + fully compatible and widely used. These licenses are available from the + directory:: + + LICENSES/preferred/ + + in the kernel source tree. + + The files in this directory contain the full license text and + `Metatags`_. The file names are identical to the SPDX license + identifier which shall be used for the license in source files. + + Examples:: + + LICENSES/preferred/GPL-2.0 + + Contains the GPL version 2 license text and the required metatags:: + + LICENSES/preferred/MIT + + Contains the MIT license text and the required metatags + + _`Metatags`: + + The following meta tags must be available in a license file: + + - Valid-License-Identifier: + + One or more lines which declare which License Identifiers are valid + inside the project to reference this particular license text. Usually + this is a single valid identifier, but e.g. for licenses with the 'or + later' options two identifiers are valid. + + - SPDX-URL: + + The URL of the SPDX page which contains additional information related + to the license. + + - Usage-Guidance: + + Freeform text for usage advice. The text must include correct examples + for the SPDX license identifiers as they should be put into source + files according to the `License identifier syntax`_ guidelines. + + - License-Text: + + All text after this tag is treated as the original license text + + File format examples:: + + Valid-License-Identifier: GPL-2.0 + Valid-License-Identifier: GPL-2.0+ + SPDX-URL: https://spdx.org/licenses/GPL-2.0.html + Usage-Guide: + To use this license in source code, put one of the following SPDX + tag/value pairs into a comment according to the placement + guidelines in the licensing rules documentation. + For 'GNU General Public License (GPL) version 2 only' use: + SPDX-License-Identifier: GPL-2.0 + For 'GNU General Public License (GPL) version 2 or any later version' use: + SPDX-License-Identifier: GPL-2.0+ + License-Text: + Full license text + + :: + + SPDX-License-Identifier: MIT + SPDX-URL: https://spdx.org/licenses/MIT.html + Usage-Guide: + To use this license in source code, put the following SPDX + tag/value pair into a comment according to the placement + guidelines in the licensing rules documentation. + SPDX-License-Identifier: MIT + License-Text: + Full license text + +| + +2. Not recommended licenses: + + These licenses should only be used for existing code or for importing + code from a different project. These licenses are available from the + directory:: + + LICENSES/other/ + + in the kernel source tree. + + The files in this directory contain the full license text and + `Metatags`_. The file names are identical to the SPDX license + identifier which shall be used for the license in source files. + + Examples:: + + LICENSES/other/ISC + + Contains the Internet Systems Consortium license text and the required + metatags:: + + LICENSES/other/ZLib + + Contains the ZLIB license text and the required metatags. + + Metatags: + + The metatag requirements for 'other' licenses are identical to the + requirements of the `Preferred licenses`_. + + File format example:: + + Valid-License-Identifier: ISC + SPDX-URL: https://spdx.org/licenses/ISC.html + Usage-Guide: + Usage of this license in the kernel for new code is discouraged + and it should solely be used for importing code from an already + existing project. + To use this license in source code, put the following SPDX + tag/value pair into a comment according to the placement + guidelines in the licensing rules documentation. + SPDX-License-Identifier: ISC + License-Text: + Full license text + +| + +3. _`Exceptions`: + + Some licenses can be amended with exceptions which grant certain rights + which the original license does not. These exceptions are available + from the directory:: + + LICENSES/exceptions/ + + in the kernel source tree. The files in this directory contain the full + exception text and the required `Exception Metatags`_. + + Examples:: + + LICENSES/exceptions/Linux-syscall-note + + Contains the Linux syscall exception as documented in the COPYING + file of the Linux kernel, which is used for UAPI header files. + e.g. /\* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note \*/:: + + LICENSES/exceptions/GCC-exception-2.0 + + Contains the GCC 'linking exception' which allows to link any binary + independent of its license against the compiled version of a file marked + with this exception. This is required for creating runnable executables + from source code which is not compatible with the GPL. + + _`Exception Metatags`: + + The following meta tags must be available in an exception file: + + - SPDX-Exception-Identifier: + + One exception identifier which can be used with SPDX license + identifiers. + + - SPDX-URL: + + The URL of the SPDX page which contains additional information related + to the exception. + + - SPDX-Licenses: + + A comma separated list of SPDX license identifiers for which the + exception can be used. + + - Usage-Guidance: + + Freeform text for usage advice. The text must be followed by correct + examples for the SPDX license identifiers as they should be put into + source files according to the `License identifier syntax`_ guidelines. + + - Exception-Text: + + All text after this tag is treated as the original exception text + + File format examples:: + + SPDX-Exception-Identifier: Linux-syscall-note + SPDX-URL: https://spdx.org/licenses/Linux-syscall-note.html + SPDX-Licenses: GPL-2.0, GPL-2.0+, GPL-1.0+, LGPL-2.0, LGPL-2.0+, LGPL-2.1, LGPL-2.1+ + Usage-Guidance: + This exception is used together with one of the above SPDX-Licenses + to mark user-space API (uapi) header files so they can be included + into non GPL compliant user-space application code. + To use this exception add it with the keyword WITH to one of the + identifiers in the SPDX-Licenses tag: + SPDX-License-Identifier: <SPDX-License> WITH Linux-syscall-note + Exception-Text: + Full exception text + + :: + + SPDX-Exception-Identifier: GCC-exception-2.0 + SPDX-URL: https://spdx.org/licenses/GCC-exception-2.0.html + SPDX-Licenses: GPL-2.0, GPL-2.0+ + Usage-Guidance: + The "GCC Runtime Library exception 2.0" is used together with one + of the above SPDX-Licenses for code imported from the GCC runtime + library. + To use this exception add it with the keyword WITH to one of the + identifiers in the SPDX-Licenses tag: + SPDX-License-Identifier: <SPDX-License> WITH GCC-exception-2.0 + Exception-Text: + Full exception text + + +All SPDX license identifiers and exceptions must have a corresponding file +in the LICENSE subdirectories. This is required to allow tool +verification (e.g. checkpatch.pl) and to have the licenses ready to read +and extract right from the source, which is recommended by various FOSS +organizations, e.g. the `FSFE REUSE initiative <https://reuse.software/>`_. diff --git a/Documentation/process/magic-number.rst b/Documentation/process/magic-number.rst new file mode 100644 index 000000000..633be1043 --- /dev/null +++ b/Documentation/process/magic-number.rst @@ -0,0 +1,161 @@ +Linux magic numbers +=================== + +This file is a registry of magic numbers which are in use. When you +add a magic number to a structure, you should also add it to this +file, since it is best if the magic numbers used by various structures +are unique. + +It is a **very** good idea to protect kernel data structures with magic +numbers. This allows you to check at run time whether (a) a structure +has been clobbered, or (b) you've passed the wrong structure to a +routine. This last is especially useful --- particularly when you are +passing pointers to structures via a void * pointer. The tty code, +for example, does this frequently to pass driver-specific and line +discipline-specific structures back and forth. + +The way to use magic numbers is to declare them at the beginning of +the structure, like so:: + + struct tty_ldisc { + int magic; + ... + }; + +Please follow this discipline when you are adding future enhancements +to the kernel! It has saved me countless hours of debugging, +especially in the screwy cases where an array has been overrun and +structures following the array have been overwritten. Using this +discipline, these cases get detected quickly and safely. + +Changelog:: + + Theodore Ts'o + 31 Mar 94 + + The magic table is current to Linux 2.1.55. + + Michael Chastain + <mailto:mec@shout.net> + 22 Sep 1997 + + Now it should be up to date with Linux 2.1.112. Because + we are in feature freeze time it is very unlikely that + something will change before 2.2.x. The entries are + sorted by number field. + + Krzysztof G. Baranowski + <mailto: kgb@knm.org.pl> + 29 Jul 1998 + + Updated the magic table to Linux 2.5.45. Right over the feature freeze, + but it is possible that some new magic numbers will sneak into the + kernel before 2.6.x yet. + + Petr Baudis + <pasky@ucw.cz> + 03 Nov 2002 + + Updated the magic table to Linux 2.5.74. + + Fabian Frederick + <ffrederick@users.sourceforge.net> + 09 Jul 2003 + + +===================== ================ ======================== ========================================== +Magic Name Number Structure File +===================== ================ ======================== ========================================== +PG_MAGIC 'P' pg_{read,write}_hdr ``include/linux/pg.h`` +CMAGIC 0x0111 user ``include/linux/a.out.h`` +MKISS_DRIVER_MAGIC 0x04bf mkiss_channel ``drivers/net/mkiss.h`` +HDLC_MAGIC 0x239e n_hdlc ``drivers/char/n_hdlc.c`` +APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c`` +CYCLADES_MAGIC 0x4359 cyclades_port ``include/linux/cyclades.h`` +DB_MAGIC 0x4442 fc_info ``drivers/net/iph5526_novram.c`` +DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c`` +FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h`` +FF_MAGIC 0x4646 fc_info ``drivers/net/iph5526_novram.c`` +ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h`` +PTY_MAGIC 0x5001 ``drivers/char/pty.c`` +PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h`` +SERIAL_MAGIC 0x5301 async_struct ``include/linux/serial.h`` +SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h`` +SLIP_MAGIC 0x5302 slip ``drivers/net/slip.h`` +STRIP_MAGIC 0x5303 strip ``drivers/net/strip.c`` +X25_ASY_MAGIC 0x5303 x25_asy ``drivers/net/x25_asy.h`` +SIXPACK_MAGIC 0x5304 sixpack ``drivers/net/hamradio/6pack.h`` +AX25_MAGIC 0x5316 ax_disp ``drivers/net/mkiss.h`` +TTY_MAGIC 0x5401 tty_struct ``include/linux/tty.h`` +MGSL_MAGIC 0x5401 mgsl_info ``drivers/char/synclink.c`` +TTY_DRIVER_MAGIC 0x5402 tty_driver ``include/linux/tty_driver.h`` +MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c`` +TTY_LDISC_MAGIC 0x5403 tty_ldisc ``include/linux/tty_ldisc.h`` +USB_SERIAL_MAGIC 0x6702 usb_serial ``drivers/usb/serial/usb-serial.h`` +FULL_DUPLEX_MAGIC 0x6969 ``drivers/net/ethernet/dec/tulip/de2104x.c`` +USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth ``drivers/usb/class/bluetty.c`` +RFCOMM_TTY_MAGIC 0x6d02 ``net/bluetooth/rfcomm/tty.c`` +USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port ``drivers/usb/serial/usb-serial.h`` +CG_MAGIC 0x00090255 ufs_cylinder_group ``include/linux/ufs_fs.h`` +RPORT_MAGIC 0x00525001 r_port ``drivers/char/rocket_int.h`` +LSEMAGIC 0x05091998 lse ``drivers/fc4/fc.c`` +GDTIOCTL_MAGIC 0x06030f07 gdth_iowr_str ``drivers/scsi/gdth_ioctl.h`` +RIEBL_MAGIC 0x09051990 ``drivers/net/atarilance.c`` +NBD_REQUEST_MAGIC 0x12560953 nbd_request ``include/linux/nbd.h`` +RED_MAGIC2 0x170fc2a5 (any) ``mm/slab.c`` +BAYCOM_MAGIC 0x19730510 baycom_state ``drivers/net/baycom_epp.c`` +ISDN_X25IFACE_MAGIC 0x1e75a2b9 isdn_x25iface_proto_data ``drivers/isdn/isdn_x25iface.h`` +ECP_MAGIC 0x21504345 cdkecpsig ``include/linux/cdk.h`` +LSOMAGIC 0x27091997 lso ``drivers/fc4/fc.c`` +LSMAGIC 0x2a3b4d2a ls ``drivers/fc4/fc.c`` +WANPIPE_MAGIC 0x414C4453 sdla_{dump,exec} ``include/linux/wanpipe.h`` +CS_CARD_MAGIC 0x43525553 cs_card ``sound/oss/cs46xx.c`` +LABELCL_MAGIC 0x4857434c labelcl_info_s ``include/asm/ia64/sn/labelcl.h`` +ISDN_ASYNC_MAGIC 0x49344C01 modem_info ``include/linux/isdn.h`` +CTC_ASYNC_MAGIC 0x49344C01 ctc_tty_info ``drivers/s390/net/ctctty.c`` +ISDN_NET_MAGIC 0x49344C02 isdn_net_local_s ``drivers/isdn/i4l/isdn_net_lib.h`` +SAVEKMSG_MAGIC2 0x4B4D5347 savekmsg ``arch/*/amiga/config.c`` +CS_STATE_MAGIC 0x4c4f4749 cs_state ``sound/oss/cs46xx.c`` +SLAB_C_MAGIC 0x4f17a36d kmem_cache ``mm/slab.c`` +COW_MAGIC 0x4f4f4f4d cow_header_v1 ``arch/um/drivers/ubd_user.c`` +I810_CARD_MAGIC 0x5072696E i810_card ``sound/oss/i810_audio.c`` +TRIDENT_CARD_MAGIC 0x5072696E trident_card ``sound/oss/trident.c`` +ROUTER_MAGIC 0x524d4157 wan_device [in ``wanrouter.h`` pre 3.9] +SAVEKMSG_MAGIC1 0x53415645 savekmsg ``arch/*/amiga/config.c`` +GDA_MAGIC 0x58464552 gda ``arch/mips/include/asm/sn/gda.h`` +RED_MAGIC1 0x5a2cf071 (any) ``mm/slab.c`` +EEPROM_MAGIC_VALUE 0x5ab478d2 lanai_dev ``drivers/atm/lanai.c`` +HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state ``include/linux/hdlcdrv.h`` +PCXX_MAGIC 0x5c6df104 channel ``drivers/char/pcxx.h`` +KV_MAGIC 0x5f4b565f kernel_vars_s ``arch/mips/include/asm/sn/klkernvars.h`` +I810_STATE_MAGIC 0x63657373 i810_state ``sound/oss/i810_audio.c`` +TRIDENT_STATE_MAGIC 0x63657373 trient_state ``sound/oss/trident.c`` +M3_CARD_MAGIC 0x646e6f50 m3_card ``sound/oss/maestro3.c`` +FW_HEADER_MAGIC 0x65726F66 fw_header ``drivers/atm/fore200e.h`` +SLOT_MAGIC 0x67267321 slot ``drivers/hotplug/cpqphp.h`` +SLOT_MAGIC 0x67267322 slot ``drivers/hotplug/acpiphp.h`` +LO_MAGIC 0x68797548 nbd_device ``include/linux/nbd.h`` +OPROFILE_MAGIC 0x6f70726f super_block ``drivers/oprofile/oprofilefs.h`` +M3_STATE_MAGIC 0x734d724d m3_state ``sound/oss/maestro3.c`` +VMALLOC_MAGIC 0x87654320 snd_alloc_track ``sound/core/memory.c`` +KMALLOC_MAGIC 0x87654321 snd_alloc_track ``sound/core/memory.c`` +PWC_MAGIC 0x89DC10AB pwc_device ``drivers/usb/media/pwc.h`` +NBD_REPLY_MAGIC 0x96744668 nbd_reply ``include/linux/nbd.h`` +ENI155_MAGIC 0xa54b872d midway_eprom ``drivers/atm/eni.h`` +CODA_MAGIC 0xC0DAC0DA coda_file_info ``fs/coda/coda_fs_i.h`` +DPMEM_MAGIC 0xc0ffee11 gdt_pci_sram ``drivers/scsi/gdth.h`` +YAM_MAGIC 0xF10A7654 yam_port ``drivers/net/hamradio/yam.c`` +CCB_MAGIC 0xf2691ad2 ccb ``drivers/scsi/ncr53c8xx.c`` +QUEUE_MAGIC_FREE 0xf7e1c9a3 queue_entry ``drivers/scsi/arm/queue.c`` +QUEUE_MAGIC_USED 0xf7e1cc33 queue_entry ``drivers/scsi/arm/queue.c`` +HTB_CMAGIC 0xFEFAFEF1 htb_class ``net/sched/sch_htb.c`` +NMI_MAGIC 0x48414d4d455201 nmi_s ``arch/mips/include/asm/sn/nmi.h`` +===================== ================ ======================== ========================================== + +Note that there are also defined special per-driver magic numbers in sound +memory management. See ``include/sound/sndmagic.h`` for complete list of them. Many +OSS sound drivers have their magic numbers constructed from the soundcard PCI +ID - these are not listed here as well. + +HFS is another larger user of magic numbers - you can find them in +``fs/hfs/hfs.h``. diff --git a/Documentation/process/maintainer-pgp-guide.rst b/Documentation/process/maintainer-pgp-guide.rst new file mode 100644 index 000000000..aff9b1a4d --- /dev/null +++ b/Documentation/process/maintainer-pgp-guide.rst @@ -0,0 +1,964 @@ +.. _pgpguide: + +=========================== +Kernel Maintainer PGP guide +=========================== + +:Author: Konstantin Ryabitsev <konstantin@linuxfoundation.org> + +This document is aimed at Linux kernel developers, and especially at +subsystem maintainers. It contains a subset of information discussed in +the more general "`Protecting Code Integrity`_" guide published by the +Linux Foundation. Please read that document for more in-depth discussion +on some of the topics mentioned in this guide. + +.. _`Protecting Code Integrity`: https://github.com/lfit/itpol/blob/master/protecting-code-integrity.md + +The role of PGP in Linux Kernel development +=========================================== + +PGP helps ensure the integrity of the code that is produced by the Linux +kernel development community and, to a lesser degree, establish trusted +communication channels between developers via PGP-signed email exchange. + +The Linux kernel source code is available in two main formats: + +- Distributed source repositories (git) +- Periodic release snapshots (tarballs) + +Both git repositories and tarballs carry PGP signatures of the kernel +developers who create official kernel releases. These signatures offer a +cryptographic guarantee that downloadable versions made available via +kernel.org or any other mirrors are identical to what these developers +have on their workstations. To this end: + +- git repositories provide PGP signatures on all tags +- tarballs provide detached PGP signatures with all downloads + +.. _devs_not_infra: + +Trusting the developers, not infrastructure +------------------------------------------- + +Ever since the 2011 compromise of core kernel.org systems, the main +operating principle of the Kernel Archives project has been to assume +that any part of the infrastructure can be compromised at any time. For +this reason, the administrators have taken deliberate steps to emphasize +that trust must always be placed with developers and never with the code +hosting infrastructure, regardless of how good the security practices +for the latter may be. + +The above guiding principle is the reason why this guide is needed. We +want to make sure that by placing trust into developers we do not simply +shift the blame for potential future security incidents to someone else. +The goal is to provide a set of guidelines developers can use to create +a secure working environment and safeguard the PGP keys used to +establish the integrity of the Linux kernel itself. + +.. _pgp_tools: + +PGP tools +========= + +Use GnuPG v2 +------------ + +Your distro should already have GnuPG installed by default, you just +need to verify that you are using version 2.x and not the legacy 1.4 +release -- many distributions still package both, with the default +``gpg`` command invoking GnuPG v.1. To check, run:: + + $ gpg --version | head -n1 + +If you see ``gpg (GnuPG) 1.4.x``, then you are using GnuPG v.1. Try the +``gpg2`` command (if you don't have it, you may need to install the +gnupg2 package):: + + $ gpg2 --version | head -n1 + +If you see ``gpg (GnuPG) 2.x.x``, then you are good to go. This guide +will assume you have the version 2.2 of GnuPG (or later). If you are +using version 2.0 of GnuPG, then some of the commands in this guide will +not work, and you should consider installing the latest 2.2 version of +GnuPG. Versions of gnupg-2.1.11 and later should be compatible for the +purposes of this guide as well. + +If you have both ``gpg`` and ``gpg2`` commands, you should make sure you +are always using GnuPG v2, not the legacy version. You can enforce this +by setting the appropriate alias:: + + $ alias gpg=gpg2 + +You can put that in your ``.bashrc`` to make sure it's always the case. + +Configure gpg-agent options +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The GnuPG agent is a helper tool that will start automatically whenever +you use the ``gpg`` command and run in the background with the purpose +of caching the private key passphrase. There are two options you should +know in order to tweak when the passphrase should be expired from cache: + +- ``default-cache-ttl`` (seconds): If you use the same key again before + the time-to-live expires, the countdown will reset for another period. + The default is 600 (10 minutes). +- ``max-cache-ttl`` (seconds): Regardless of how recently you've used + the key since initial passphrase entry, if the maximum time-to-live + countdown expires, you'll have to enter the passphrase again. The + default is 30 minutes. + +If you find either of these defaults too short (or too long), you can +edit your ``~/.gnupg/gpg-agent.conf`` file to set your own values:: + + # set to 30 minutes for regular ttl, and 2 hours for max ttl + default-cache-ttl 1800 + max-cache-ttl 7200 + +.. note:: + + It is no longer necessary to start gpg-agent manually at the + beginning of your shell session. You may want to check your rc files + to remove anything you had in place for older versions of GnuPG, as + it may not be doing the right thing any more. + +Set up a refresh cronjob +~~~~~~~~~~~~~~~~~~~~~~~~ + +You will need to regularly refresh your keyring in order to get the +latest changes on other people's public keys, which is best done with a +daily cronjob:: + + @daily /usr/bin/gpg2 --refresh >/dev/null 2>&1 + +Check the full path to your ``gpg`` or ``gpg2`` command and use the +``gpg2`` command if regular ``gpg`` for you is the legacy GnuPG v.1. + +.. _master_key: + +Protect your master PGP key +=========================== + +This guide assumes that you already have a PGP key that you use for Linux +kernel development purposes. If you do not yet have one, please see the +"`Protecting Code Integrity`_" document mentioned earlier for guidance +on how to create a new one. + +You should also make a new key if your current one is weaker than 2048 bits +(RSA). + +Master key vs. Subkeys +---------------------- + +Subkeys are fully independent PGP keypairs that are tied to the "master" +key using certifying key signatures (certificates). It is important to +understand the following: + +1. There are no technical differences between the "master key" and "subkeys." +2. At creation time, we assign functional limitations to each key by + giving it specific capabilities. +3. A PGP key can have 4 capabilities: + + - **[S]** key can be used for signing + - **[E]** key can be used for encryption + - **[A]** key can be used for authentication + - **[C]** key can be used for certifying other keys + +4. A single key may have multiple capabilities. +5. A subkey is fully independent from the master key. A message + encrypted to a subkey cannot be decrypted with the master key. If you + lose your private subkey, it cannot be recreated from the master key + in any way. + +The key carrying the **[C]** (certify) capability is considered the +"master" key because it is the only key that can be used to indicate +relationship with other keys. Only the **[C]** key can be used to: + +- add or revoke other keys (subkeys) with S/E/A capabilities +- add, change or revoke identities (uids) associated with the key +- add or change the expiration date on itself or any subkey +- sign other people's keys for web of trust purposes + +By default, GnuPG creates the following when generating new keys: + +- A master key carrying both Certify and Sign capabilities (**[SC]**) +- A separate subkey with the Encryption capability (**[E]**) + +If you used the default parameters when generating your key, then that +is what you will have. You can verify by running ``gpg --list-secret-keys``, +for example:: + + sec rsa2048 2018-01-23 [SC] [expires: 2020-01-23] + 000000000000000000000000AAAABBBBCCCCDDDD + uid [ultimate] Alice Dev <adev@kernel.org> + ssb rsa2048 2018-01-23 [E] [expires: 2020-01-23] + +Any key carrying the **[C]** capability is your master key, regardless +of any other capabilities it may have assigned to it. + +The long line under the ``sec`` entry is your key fingerprint -- +whenever you see ``[fpr]`` in the examples below, that 40-character +string is what it refers to. + +Ensure your passphrase is strong +-------------------------------- + +GnuPG uses passphrases to encrypt your private keys before storing them on +disk. This way, even if your ``.gnupg`` directory is leaked or stolen in +its entirety, the attackers cannot use your private keys without first +obtaining the passphrase to decrypt them. + +It is absolutely essential that your private keys are protected by a +strong passphrase. To set it or change it, use:: + + $ gpg --change-passphrase [fpr] + +Create a separate Signing subkey +-------------------------------- + +Our goal is to protect your master key by moving it to offline media, so +if you only have a combined **[SC]** key, then you should create a separate +signing subkey:: + + $ gpg --quick-addkey [fpr] ed25519 sign + +Remember to tell the keyservers about this change, so others can pull down +your new subkey:: + + $ gpg --send-key [fpr] + +.. note:: ECC support in GnuPG + + GnuPG 2.1 and later has full support for Elliptic Curve + Cryptography, with ability to combine ECC subkeys with traditional + RSA master keys. The main upside of ECC cryptography is that it is + much faster computationally and creates much smaller signatures when + compared byte for byte with 2048+ bit RSA keys. Unless you plan on + using a smartcard device that does not support ECC operations, we + recommend that you create an ECC signing subkey for your kernel + work. + + If for some reason you prefer to stay with RSA subkeys, just replace + "ed25519" with "rsa2048" in the above command. + + +Back up your master key for disaster recovery +--------------------------------------------- + +The more signatures you have on your PGP key from other developers, the +more reasons you have to create a backup version that lives on something +other than digital media, for disaster recovery reasons. + +The best way to create a printable hardcopy of your private key is by +using the ``paperkey`` software written for this very purpose. See ``man +paperkey`` for more details on the output format and its benefits over +other solutions. Paperkey should already be packaged for most +distributions. + +Run the following command to create a hardcopy backup of your private +key:: + + $ gpg --export-secret-key [fpr] | paperkey -o /tmp/key-backup.txt + +Print out that file (or pipe the output straight to lpr), then take a +pen and write your passphrase on the margin of the paper. **This is +strongly recommended** because the key printout is still encrypted with +that passphrase, and if you ever change it you will not remember what it +used to be when you had created the backup -- *guaranteed*. + +Put the resulting printout and the hand-written passphrase into an envelope +and store in a secure and well-protected place, preferably away from your +home, such as your bank vault. + +.. note:: + + Your printer is probably no longer a simple dumb device connected to + your parallel port, but since the output is still encrypted with + your passphrase, printing out even to "cloud-integrated" modern + printers should remain a relatively safe operation. One option is to + change the passphrase on your master key immediately after you are + done with paperkey. + +Back up your whole GnuPG directory +---------------------------------- + +.. warning:: + + **!!!Do not skip this step!!!** + +It is important to have a readily available backup of your PGP keys +should you need to recover them. This is different from the +disaster-level preparedness we did with ``paperkey``. You will also rely +on these external copies whenever you need to use your Certify key -- +such as when making changes to your own key or signing other people's +keys after conferences and summits. + +Start by getting a small USB "thumb" drive (preferably two!) that you +will use for backup purposes. You will need to encrypt them using LUKS +-- refer to your distro's documentation on how to accomplish this. + +For the encryption passphrase, you can use the same one as on your +master key. + +Once the encryption process is over, re-insert the USB drive and make +sure it gets properly mounted. Copy your entire ``.gnupg`` directory +over to the encrypted storage:: + + $ cp -a ~/.gnupg /media/disk/foo/gnupg-backup + +You should now test to make sure everything still works:: + + $ gpg --homedir=/media/disk/foo/gnupg-backup --list-key [fpr] + +If you don't get any errors, then you should be good to go. Unmount the +USB drive, distinctly label it so you don't blow it away next time you +need to use a random USB drive, and put in a safe place -- but not too +far away, because you'll need to use it every now and again for things +like editing identities, adding or revoking subkeys, or signing other +people's keys. + +Remove the master key from your homedir +---------------------------------------- + +The files in our home directory are not as well protected as we like to +think. They can be leaked or stolen via many different means: + +- by accident when making quick homedir copies to set up a new workstation +- by systems administrator negligence or malice +- via poorly secured backups +- via malware in desktop apps (browsers, pdf viewers, etc) +- via coercion when crossing international borders + +Protecting your key with a good passphrase greatly helps reduce the risk +of any of the above, but passphrases can be discovered via keyloggers, +shoulder-surfing, or any number of other means. For this reason, the +recommended setup is to remove your master key from your home directory +and store it on offline storage. + +.. warning:: + + Please see the previous section and make sure you have backed up + your GnuPG directory in its entirety. What we are about to do will + render your key useless if you do not have a usable backup! + +First, identify the keygrip of your master key:: + + $ gpg --with-keygrip --list-key [fpr] + +The output will be something like this:: + + pub rsa2048 2018-01-24 [SC] [expires: 2020-01-24] + 000000000000000000000000AAAABBBBCCCCDDDD + Keygrip = 1111000000000000000000000000000000000000 + uid [ultimate] Alice Dev <adev@kernel.org> + sub rsa2048 2018-01-24 [E] [expires: 2020-01-24] + Keygrip = 2222000000000000000000000000000000000000 + sub ed25519 2018-01-24 [S] + Keygrip = 3333000000000000000000000000000000000000 + +Find the keygrip entry that is beneath the ``pub`` line (right under the +master key fingerprint). This will correspond directly to a file in your +``~/.gnupg`` directory:: + + $ cd ~/.gnupg/private-keys-v1.d + $ ls + 1111000000000000000000000000000000000000.key + 2222000000000000000000000000000000000000.key + 3333000000000000000000000000000000000000.key + +All you have to do is simply remove the .key file that corresponds to +the master keygrip:: + + $ cd ~/.gnupg/private-keys-v1.d + $ rm 1111000000000000000000000000000000000000.key + +Now, if you issue the ``--list-secret-keys`` command, it will show that +the master key is missing (the ``#`` indicates it is not available):: + + $ gpg --list-secret-keys + sec# rsa2048 2018-01-24 [SC] [expires: 2020-01-24] + 000000000000000000000000AAAABBBBCCCCDDDD + uid [ultimate] Alice Dev <adev@kernel.org> + ssb rsa2048 2018-01-24 [E] [expires: 2020-01-24] + ssb ed25519 2018-01-24 [S] + +You should also remove any ``secring.gpg`` files in the ``~/.gnupg`` +directory, which are left over from earlier versions of GnuPG. + +If you don't have the "private-keys-v1.d" directory +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If you do not have a ``~/.gnupg/private-keys-v1.d`` directory, then your +secret keys are still stored in the legacy ``secring.gpg`` file used by +GnuPG v1. Making any changes to your key, such as changing the +passphrase or adding a subkey, should automatically convert the old +``secring.gpg`` format to use ``private-keys-v1.d`` instead. + +Once you get that done, make sure to delete the obsolete ``secring.gpg`` +file, which still contains your private keys. + +.. _smartcards: + +Move the subkeys to a dedicated crypto device +============================================= + +Even though the master key is now safe from being leaked or stolen, the +subkeys are still in your home directory. Anyone who manages to get +their hands on those will be able to decrypt your communication or fake +your signatures (if they know the passphrase). Furthermore, each time a +GnuPG operation is performed, the keys are loaded into system memory and +can be stolen from there by sufficiently advanced malware (think +Meltdown and Spectre). + +The best way to completely protect your keys is to move them to a +specialized hardware device that is capable of smartcard operations. + +The benefits of smartcards +-------------------------- + +A smartcard contains a cryptographic chip that is capable of storing +private keys and performing crypto operations directly on the card +itself. Because the key contents never leave the smartcard, the +operating system of the computer into which you plug in the hardware +device is not able to retrieve the private keys themselves. This is very +different from the encrypted USB storage device we used earlier for +backup purposes -- while that USB device is plugged in and mounted, the +operating system is able to access the private key contents. + +Using external encrypted USB media is not a substitute to having a +smartcard-capable device. + +Available smartcard devices +--------------------------- + +Unless all your laptops and workstations have smartcard readers, the +easiest is to get a specialized USB device that implements smartcard +functionality. There are several options available: + +- `Nitrokey Start`_: Open hardware and Free Software, based on FSI + Japan's `Gnuk`_. Offers support for ECC keys, but fewest security + features (such as resistance to tampering or some side-channel + attacks). +- `Nitrokey Pro`_: Similar to the Nitrokey Start, but more + tamper-resistant and offers more security features, but no ECC + support. +- `Yubikey 4`_: proprietary hardware and software, but cheaper than + Nitrokey Pro and comes available in the USB-C form that is more useful + with newer laptops. Offers additional security features such as FIDO + U2F, but no ECC. + +`LWN has a good review`_ of some of the above models, as well as several +others. If you want to use ECC keys, your best bet among commercially +available devices is the Nitrokey Start. + +.. note:: + + If you are listed in MAINTAINERS or have an account at kernel.org, + you `qualify for a free Nitrokey Start`_ courtesy of The Linux + Foundation. + +.. _`Nitrokey Start`: https://shop.nitrokey.com/shop/product/nitrokey-start-6 +.. _`Nitrokey Pro`: https://shop.nitrokey.com/shop/product/nitrokey-pro-3 +.. _`Yubikey 4`: https://www.yubico.com/product/yubikey-4-series/ +.. _Gnuk: http://www.fsij.org/doc-gnuk/ +.. _`LWN has a good review`: https://lwn.net/Articles/736231/ +.. _`qualify for a free Nitrokey Start`: https://www.kernel.org/nitrokey-digital-tokens-for-kernel-developers.html + +Configure your smartcard device +------------------------------- + +Your smartcard device should Just Work (TM) the moment you plug it into +any modern Linux workstation. You can verify it by running:: + + $ gpg --card-status + +If you see full smartcard details, then you are good to go. +Unfortunately, troubleshooting all possible reasons why things may not +be working for you is way beyond the scope of this guide. If you are +having trouble getting the card to work with GnuPG, please seek help via +usual support channels. + +To configure your smartcard, you will need to use the GnuPG menu system, as +there are no convenient command-line switches:: + + $ gpg --card-edit + [...omitted...] + gpg/card> admin + Admin commands are allowed + gpg/card> passwd + +You should set the user PIN (1), Admin PIN (3), and the Reset Code (4). +Please make sure to record and store these in a safe place -- especially +the Admin PIN and the Reset Code (which allows you to completely wipe +the smartcard). You so rarely need to use the Admin PIN, that you will +inevitably forget what it is if you do not record it. + +Getting back to the main card menu, you can also set other values (such +as name, sex, login data, etc), but it's not necessary and will +additionally leak information about your smartcard should you lose it. + +.. note:: + + Despite having the name "PIN", neither the user PIN nor the admin + PIN on the card need to be numbers. + +.. warning:: + + Some devices may require that you move the subkeys onto the device + before you can change the passphrase. Please check the documentation + provided by the device manufacturer. + +Move the subkeys to your smartcard +---------------------------------- + +Exit the card menu (using "q") and save all changes. Next, let's move +your subkeys onto the smartcard. You will need both your PGP key +passphrase and the admin PIN of the card for most operations:: + + $ gpg --edit-key [fpr] + + Secret subkeys are available. + + pub rsa2048/AAAABBBBCCCCDDDD + created: 2018-01-23 expires: 2020-01-23 usage: SC + trust: ultimate validity: ultimate + ssb rsa2048/1111222233334444 + created: 2018-01-23 expires: never usage: E + ssb ed25519/5555666677778888 + created: 2017-12-07 expires: never usage: S + [ultimate] (1). Alice Dev <adev@kernel.org> + + gpg> + +Using ``--edit-key`` puts us into the menu mode again, and you will +notice that the key listing is a little different. From here on, all +commands are done from inside this menu mode, as indicated by ``gpg>``. + +First, let's select the key we'll be putting onto the card -- you do +this by typing ``key 1`` (it's the first one in the listing, the **[E]** +subkey):: + + gpg> key 1 + +In the output, you should now see ``ssb*`` on the **[E]** key. The ``*`` +indicates which key is currently "selected." It works as a *toggle*, +meaning that if you type ``key 1`` again, the ``*`` will disappear and +the key will not be selected any more. + +Now, let's move that key onto the smartcard:: + + gpg> keytocard + Please select where to store the key: + (2) Encryption key + Your selection? 2 + +Since it's our **[E]** key, it makes sense to put it into the Encryption +slot. When you submit your selection, you will be prompted first for +your PGP key passphrase, and then for the admin PIN. If the command +returns without an error, your key has been moved. + +**Important**: Now type ``key 1`` again to unselect the first key, and +``key 2`` to select the **[S]** key:: + + gpg> key 1 + gpg> key 2 + gpg> keytocard + Please select where to store the key: + (1) Signature key + (3) Authentication key + Your selection? 1 + +You can use the **[S]** key both for Signature and Authentication, but +we want to make sure it's in the Signature slot, so choose (1). Once +again, if your command returns without an error, then the operation was +successful:: + + gpg> q + Save changes? (y/N) y + +Saving the changes will delete the keys you moved to the card from your +home directory (but it's okay, because we have them in our backups +should we need to do this again for a replacement smartcard). + +Verifying that the keys were moved +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If you perform ``--list-secret-keys`` now, you will see a subtle +difference in the output:: + + $ gpg --list-secret-keys + sec# rsa2048 2018-01-24 [SC] [expires: 2020-01-24] + 000000000000000000000000AAAABBBBCCCCDDDD + uid [ultimate] Alice Dev <adev@kernel.org> + ssb> rsa2048 2018-01-24 [E] [expires: 2020-01-24] + ssb> ed25519 2018-01-24 [S] + +The ``>`` in the ``ssb>`` output indicates that the subkey is only +available on the smartcard. If you go back into your secret keys +directory and look at the contents there, you will notice that the +``.key`` files there have been replaced with stubs:: + + $ cd ~/.gnupg/private-keys-v1.d + $ strings *.key | grep 'private-key' + +The output should contain ``shadowed-private-key`` to indicate that +these files are only stubs and the actual content is on the smartcard. + +Verifying that the smartcard is functioning +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To verify that the smartcard is working as intended, you can create a +signature:: + + $ echo "Hello world" | gpg --clearsign > /tmp/test.asc + $ gpg --verify /tmp/test.asc + +This should ask for your smartcard PIN on your first command, and then +show "Good signature" after you run ``gpg --verify``. + +Congratulations, you have successfully made it extremely difficult to +steal your digital developer identity! + +Other common GnuPG operations +----------------------------- + +Here is a quick reference for some common operations you'll need to do +with your PGP key. + +Mounting your master key offline storage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +You will need your master key for any of the operations below, so you +will first need to mount your backup offline storage and tell GnuPG to +use it:: + + $ export GNUPGHOME=/media/disk/foo/gnupg-backup + $ gpg --list-secret-keys + +You want to make sure that you see ``sec`` and not ``sec#`` in the +output (the ``#`` means the key is not available and you're still using +your regular home directory location). + +Extending key expiration date +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The master key has the default expiration date of 2 years from the date +of creation. This is done both for security reasons and to make obsolete +keys eventually disappear from keyservers. + +To extend the expiration on your key by a year from current date, just +run:: + + $ gpg --quick-set-expire [fpr] 1y + +You can also use a specific date if that is easier to remember (e.g. +your birthday, January 1st, or Canada Day):: + + $ gpg --quick-set-expire [fpr] 2020-07-01 + +Remember to send the updated key back to keyservers:: + + $ gpg --send-key [fpr] + +Updating your work directory after any changes +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +After you make any changes to your key using the offline storage, you will +want to import these changes back into your regular working directory:: + + $ gpg --export | gpg --homedir ~/.gnupg --import + $ unset GNUPGHOME + +Using gpg-agent over ssh +~~~~~~~~~~~~~~~~~~~~~~~~ + +You can forward your gpg-agent over ssh if you need to sign tags or +commits on a remote system. Please refer to the instructions provided +on the GnuPG wiki: + +- `Agent Forwarding over SSH`_ + +It works more smoothly if you can modify the sshd server settings on the +remote end. + +.. _`Agent Forwarding over SSH`: https://wiki.gnupg.org/AgentForwarding + + +Using PGP with Git +================== + +One of the core features of Git is its decentralized nature -- once a +repository is cloned to your system, you have full history of the +project, including all of its tags, commits and branches. However, with +hundreds of cloned repositories floating around, how does anyone verify +that their copy of linux.git has not been tampered with by a malicious +third party? + +Or what happens if a backdoor is discovered in the code and the "Author" +line in the commit says it was done by you, while you're pretty sure you +had `nothing to do with it`_? + +To address both of these issues, Git introduced PGP integration. Signed +tags prove the repository integrity by assuring that its contents are +exactly the same as on the workstation of the developer who created the +tag, while signed commits make it nearly impossible for someone to +impersonate you without having access to your PGP keys. + +.. _`nothing to do with it`: https://github.com/jayphelps/git-blame-someone-else + +Configure git to use your PGP key +--------------------------------- + +If you only have one secret key in your keyring, then you don't really +need to do anything extra, as it becomes your default key. However, if +you happen to have multiple secret keys, you can tell git which key +should be used (``[fpr]`` is the fingerprint of your key):: + + $ git config --global user.signingKey [fpr] + +**IMPORTANT**: If you have a distinct ``gpg2`` command, then you should +tell git to always use it instead of the legacy ``gpg`` from version 1:: + + $ git config --global gpg.program gpg2 + $ git config --global gpgv.program gpgv2 + +How to work with signed tags +---------------------------- + +To create a signed tag, simply pass the ``-s`` switch to the tag +command:: + + $ git tag -s [tagname] + +Our recommendation is to always sign git tags, as this allows other +developers to ensure that the git repository they are pulling from has +not been maliciously altered. + +How to verify signed tags +~~~~~~~~~~~~~~~~~~~~~~~~~ + +To verify a signed tag, simply use the ``verify-tag`` command:: + + $ git verify-tag [tagname] + +If you are pulling a tag from another fork of the project repository, +git should automatically verify the signature at the tip you're pulling +and show you the results during the merge operation:: + + $ git pull [url] tags/sometag + +The merge message will contain something like this:: + + Merge tag 'sometag' of [url] + + [Tag message] + + # gpg: Signature made [...] + # gpg: Good signature from [...] + +If you are verifying someone else's git tag, then you will need to +import their PGP key. Please refer to the +":ref:`verify_identities`" section below. + +.. note:: + + If you get "``gpg: Can't check signature: unknown pubkey + algorithm``" error, you need to tell git to use gpgv2 for + verification, so it properly processes signatures made by ECC keys. + See instructions at the start of this section. + +Configure git to always sign annotated tags +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Chances are, if you're creating an annotated tag, you'll want to sign +it. To force git to always sign annotated tags, you can set a global +configuration option:: + + $ git config --global tag.forceSignAnnotated true + +How to work with signed commits +------------------------------- + +It is easy to create signed commits, but it is much more difficult to +use them in Linux kernel development, since it relies on patches sent to +the mailing list, and this workflow does not preserve PGP commit +signatures. Furthermore, when rebasing your repository to match +upstream, even your own PGP commit signatures will end up discarded. For +this reason, most kernel developers don't bother signing their commits +and will ignore signed commits in any external repositories that they +rely upon in their work. + +However, if you have your working git tree publicly available at some +git hosting service (kernel.org, infradead.org, ozlabs.org, or others), +then the recommendation is that you sign all your git commits even if +upstream developers do not directly benefit from this practice. + +We recommend this for the following reasons: + +1. Should there ever be a need to perform code forensics or track code + provenance, even externally maintained trees carrying PGP commit + signatures will be valuable for such purposes. +2. If you ever need to re-clone your local repository (for example, + after a disk failure), this lets you easily verify the repository + integrity before resuming your work. +3. If someone needs to cherry-pick your commits, this allows them to + quickly verify their integrity before applying them. + +Creating signed commits +~~~~~~~~~~~~~~~~~~~~~~~ + +To create a signed commit, you just need to pass the ``-S`` flag to the +``git commit`` command (it's capital ``-S`` due to collision with +another flag):: + + $ git commit -S + +Configure git to always sign commits +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +You can tell git to always sign commits:: + + git config --global commit.gpgSign true + +.. note:: + + Make sure you configure ``gpg-agent`` before you turn this on. + +.. _verify_identities: + +How to verify kernel developer identities +========================================= + +Signing tags and commits is easy, but how does one go about verifying +that the key used to sign something belongs to the actual kernel +developer and not to a malicious imposter? + +Configure auto-key-retrieval using WKD and DANE +----------------------------------------------- + +If you are not already someone with an extensive collection of other +developers' public keys, then you can jumpstart your keyring by relying +on key auto-discovery and auto-retrieval. GnuPG can piggyback on other +delegated trust technologies, namely DNSSEC and TLS, to get you going if +the prospect of starting your own Web of Trust from scratch is too +daunting. + +Add the following to your ``~/.gnupg/gpg.conf``:: + + auto-key-locate wkd,dane,local + auto-key-retrieve + +DNS-Based Authentication of Named Entities ("DANE") is a method for +publishing public keys in DNS and securing them using DNSSEC signed +zones. Web Key Directory ("WKD") is the alternative method that uses +https lookups for the same purpose. When using either DANE or WKD for +looking up public keys, GnuPG will validate DNSSEC or TLS certificates, +respectively, before adding auto-retrieved public keys to your local +keyring. + +Kernel.org publishes the WKD for all developers who have kernel.org +accounts. Once you have the above changes in your ``gpg.conf``, you can +auto-retrieve the keys for Linus Torvalds and Greg Kroah-Hartman (if you +don't already have them):: + + $ gpg --locate-keys torvalds@kernel.org gregkh@kernel.org + +If you have a kernel.org account, then you should `add the kernel.org +UID to your key`_ to make WKD more useful to other kernel developers. + +.. _`add the kernel.org UID to your key`: https://korg.wiki.kernel.org/userdoc/mail#adding_a_kernelorg_uid_to_your_pgp_key + +Web of Trust (WOT) vs. Trust on First Use (TOFU) +------------------------------------------------ + +PGP incorporates a trust delegation mechanism known as the "Web of +Trust." At its core, this is an attempt to replace the need for +centralized Certification Authorities of the HTTPS/TLS world. Instead of +various software makers dictating who should be your trusted certifying +entity, PGP leaves this responsibility to each user. + +Unfortunately, very few people understand how the Web of Trust works. +While it remains an important aspect of the OpenPGP specification, +recent versions of GnuPG (2.2 and above) have implemented an alternative +mechanism called "Trust on First Use" (TOFU). You can think of TOFU as +"the SSH-like approach to trust." With SSH, the first time you connect +to a remote system, its key fingerprint is recorded and remembered. If +the key changes in the future, the SSH client will alert you and refuse +to connect, forcing you to make a decision on whether you choose to +trust the changed key or not. Similarly, the first time you import +someone's PGP key, it is assumed to be valid. If at any point in the +future GnuPG comes across another key with the same identity, both the +previously imported key and the new key will be marked as invalid and +you will need to manually figure out which one to keep. + +We recommend that you use the combined TOFU+PGP trust model (which is +the new default in GnuPG v2). To set it, add (or modify) the +``trust-model`` setting in ``~/.gnupg/gpg.conf``:: + + trust-model tofu+pgp + +How to use keyservers (more) safely +----------------------------------- + +If you get a "No public key" error when trying to validate someone's +tag, then you should attempt to lookup that key using a keyserver. It is +important to keep in mind that there is absolutely no guarantee that the +key you retrieve from PGP keyservers belongs to the actual person -- +that much is by design. You are supposed to use the Web of Trust to +establish key validity. + +How to properly maintain the Web of Trust is beyond the scope of this +document, simply because doing it properly requires both effort and +dedication that tends to be beyond the caring threshold of most human +beings. Here are some shortcuts that will help you reduce the risk of +importing a malicious key. + +First, let's say you've tried to run ``git verify-tag`` but it returned +an error saying the key is not found:: + + $ git verify-tag sunxi-fixes-for-4.15-2 + gpg: Signature made Sun 07 Jan 2018 10:51:55 PM EST + gpg: using RSA key DA73759BF8619E484E5A3B47389A54219C0F2430 + gpg: issuer "wens@...org" + gpg: Can't check signature: No public key + +Let's query the keyserver for more info about that key fingerprint (the +fingerprint probably belongs to a subkey, so we can't use it directly +without finding out the ID of the master key it is associated with):: + + $ gpg --search DA73759BF8619E484E5A3B47389A54219C0F2430 + gpg: data source: hkp://keys.gnupg.net + (1) Chen-Yu Tsai <wens@...org> + 4096 bit RSA key C94035C21B4F2AEB, created: 2017-03-14, expires: 2019-03-15 + Keys 1-1 of 1 for "DA73759BF8619E484E5A3B47389A54219C0F2430". Enter number(s), N)ext, or Q)uit > q + +Locate the ID of the master key in the output, in our example +``C94035C21B4F2AEB``. Now display the key of Linus Torvalds that you +have on your keyring:: + + $ gpg --list-key torvalds@kernel.org + pub rsa2048 2011-09-20 [SC] + ABAF11C65A2970B130ABE3C479BE3E4300411886 + uid [ unknown] Linus Torvalds <torvalds@kernel.org> + sub rsa2048 2011-09-20 [E] + +Next, open the `PGP pathfinder`_. In the "From" field, paste the key +fingerprint of Linus Torvalds from the output above. In the "To" field, +paste they key-id you found via ``gpg --search`` of the unknown key, and +check the results: + +- `Finding paths to Linus`_ + +If you get a few decent trust paths, then it's a pretty good indication +that it is a valid key. You can add it to your keyring from the +keyserver now:: + + $ gpg --recv-key C94035C21B4F2AEB + +This process is not perfect, and you are obviously trusting the +administrators of the PGP Pathfinder service to not be malicious (in +fact, this goes against :ref:`devs_not_infra`). However, if you +do not carefully maintain your own web of trust, then it is a marked +improvement over blindly trusting keyservers. + +.. _`PGP pathfinder`: https://pgp.cs.uu.nl/ +.. _`Finding paths to Linus`: https://pgp.cs.uu.nl/paths/79BE3E4300411886/to/C94035C21B4F2AEB.html diff --git a/Documentation/process/management-style.rst b/Documentation/process/management-style.rst new file mode 100644 index 000000000..85ef8ca8f --- /dev/null +++ b/Documentation/process/management-style.rst @@ -0,0 +1,289 @@ +.. _managementstyle: + +Linux kernel management style +============================= + +This is a short document describing the preferred (or made up, depending +on who you ask) management style for the linux kernel. It's meant to +mirror the process/coding-style.rst document to some degree, and mainly written to +avoid answering [#f1]_ the same (or similar) questions over and over again. + +Management style is very personal and much harder to quantify than +simple coding style rules, so this document may or may not have anything +to do with reality. It started as a lark, but that doesn't mean that it +might not actually be true. You'll have to decide for yourself. + +Btw, when talking about "kernel manager", it's all about the technical +lead persons, not the people who do traditional management inside +companies. If you sign purchase orders or you have any clue about the +budget of your group, you're almost certainly not a kernel manager. +These suggestions may or may not apply to you. + +First off, I'd suggest buying "Seven Habits of Highly Effective +People", and NOT read it. Burn it, it's a great symbolic gesture. + +.. [#f1] This document does so not so much by answering the question, but by + making it painfully obvious to the questioner that we don't have a clue + to what the answer is. + +Anyway, here goes: + +.. _decisions: + +1) Decisions +------------ + +Everybody thinks managers make decisions, and that decision-making is +important. The bigger and more painful the decision, the bigger the +manager must be to make it. That's very deep and obvious, but it's not +actually true. + +The name of the game is to **avoid** having to make a decision. In +particular, if somebody tells you "choose (a) or (b), we really need you +to decide on this", you're in trouble as a manager. The people you +manage had better know the details better than you, so if they come to +you for a technical decision, you're screwed. You're clearly not +competent to make that decision for them. + +(Corollary:if the people you manage don't know the details better than +you, you're also screwed, although for a totally different reason. +Namely that you are in the wrong job, and that **they** should be managing +your brilliance instead). + +So the name of the game is to **avoid** decisions, at least the big and +painful ones. Making small and non-consequential decisions is fine, and +makes you look like you know what you're doing, so what a kernel manager +needs to do is to turn the big and painful ones into small things where +nobody really cares. + +It helps to realize that the key difference between a big decision and a +small one is whether you can fix your decision afterwards. Any decision +can be made small by just always making sure that if you were wrong (and +you **will** be wrong), you can always undo the damage later by +backtracking. Suddenly, you get to be doubly managerial for making +**two** inconsequential decisions - the wrong one **and** the right one. + +And people will even see that as true leadership (*cough* bullshit +*cough*). + +Thus the key to avoiding big decisions becomes to just avoiding to do +things that can't be undone. Don't get ushered into a corner from which +you cannot escape. A cornered rat may be dangerous - a cornered manager +is just pitiful. + +It turns out that since nobody would be stupid enough to ever really let +a kernel manager have huge fiscal responsibility **anyway**, it's usually +fairly easy to backtrack. Since you're not going to be able to waste +huge amounts of money that you might not be able to repay, the only +thing you can backtrack on is a technical decision, and there +back-tracking is very easy: just tell everybody that you were an +incompetent nincompoop, say you're sorry, and undo all the worthless +work you had people work on for the last year. Suddenly the decision +you made a year ago wasn't a big decision after all, since it could be +easily undone. + +It turns out that some people have trouble with this approach, for two +reasons: + + - admitting you were an idiot is harder than it looks. We all like to + maintain appearances, and coming out in public to say that you were + wrong is sometimes very hard indeed. + - having somebody tell you that what you worked on for the last year + wasn't worthwhile after all can be hard on the poor lowly engineers + too, and while the actual **work** was easy enough to undo by just + deleting it, you may have irrevocably lost the trust of that + engineer. And remember: "irrevocable" was what we tried to avoid in + the first place, and your decision ended up being a big one after + all. + +Happily, both of these reasons can be mitigated effectively by just +admitting up-front that you don't have a friggin' clue, and telling +people ahead of the fact that your decision is purely preliminary, and +might be the wrong thing. You should always reserve the right to change +your mind, and make people very **aware** of that. And it's much easier +to admit that you are stupid when you haven't **yet** done the really +stupid thing. + +Then, when it really does turn out to be stupid, people just roll their +eyes and say "Oops, not again". + +This preemptive admission of incompetence might also make the people who +actually do the work also think twice about whether it's worth doing or +not. After all, if **they** aren't certain whether it's a good idea, you +sure as hell shouldn't encourage them by promising them that what they +work on will be included. Make them at least think twice before they +embark on a big endeavor. + +Remember: they'd better know more about the details than you do, and +they usually already think they have the answer to everything. The best +thing you can do as a manager is not to instill confidence, but rather a +healthy dose of critical thinking on what they do. + +Btw, another way to avoid a decision is to plaintively just whine "can't +we just do both?" and look pitiful. Trust me, it works. If it's not +clear which approach is better, they'll eventually figure it out. The +answer may end up being that both teams get so frustrated by the +situation that they just give up. + +That may sound like a failure, but it's usually a sign that there was +something wrong with both projects, and the reason the people involved +couldn't decide was that they were both wrong. You end up coming up +smelling like roses, and you avoided yet another decision that you could +have screwed up on. + + +2) People +--------- + +Most people are idiots, and being a manager means you'll have to deal +with it, and perhaps more importantly, that **they** have to deal with +**you**. + +It turns out that while it's easy to undo technical mistakes, it's not +as easy to undo personality disorders. You just have to live with +theirs - and yours. + +However, in order to prepare yourself as a kernel manager, it's best to +remember not to burn any bridges, bomb any innocent villagers, or +alienate too many kernel developers. It turns out that alienating people +is fairly easy, and un-alienating them is hard. Thus "alienating" +immediately falls under the heading of "not reversible", and becomes a +no-no according to :ref:`decisions`. + +There's just a few simple rules here: + + (1) don't call people d*ckheads (at least not in public) + (2) learn how to apologize when you forgot rule (1) + +The problem with #1 is that it's very easy to do, since you can say +"you're a d*ckhead" in millions of different ways [#f2]_, sometimes without +even realizing it, and almost always with a white-hot conviction that +you are right. + +And the more convinced you are that you are right (and let's face it, +you can call just about **anybody** a d*ckhead, and you often **will** be +right), the harder it ends up being to apologize afterwards. + +To solve this problem, you really only have two options: + + - get really good at apologies + - spread the "love" out so evenly that nobody really ends up feeling + like they get unfairly targeted. Make it inventive enough, and they + might even be amused. + +The option of being unfailingly polite really doesn't exist. Nobody will +trust somebody who is so clearly hiding their true character. + +.. [#f2] Paul Simon sang "Fifty Ways to Leave Your Lover", because quite + frankly, "A Million Ways to Tell a Developer They're a D*ckhead" doesn't + scan nearly as well. But I'm sure he thought about it. + + +3) People II - the Good Kind +---------------------------- + +While it turns out that most people are idiots, the corollary to that is +sadly that you are one too, and that while we can all bask in the secure +knowledge that we're better than the average person (let's face it, +nobody ever believes that they're average or below-average), we should +also admit that we're not the sharpest knife around, and there will be +other people that are less of an idiot than you are. + +Some people react badly to smart people. Others take advantage of them. + +Make sure that you, as a kernel maintainer, are in the second group. +Suck up to them, because they are the people who will make your job +easier. In particular, they'll be able to make your decisions for you, +which is what the game is all about. + +So when you find somebody smarter than you are, just coast along. Your +management responsibilities largely become ones of saying "Sounds like a +good idea - go wild", or "That sounds good, but what about xxx?". The +second version in particular is a great way to either learn something +new about "xxx" or seem **extra** managerial by pointing out something the +smarter person hadn't thought about. In either case, you win. + +One thing to look out for is to realize that greatness in one area does +not necessarily translate to other areas. So you might prod people in +specific directions, but let's face it, they might be good at what they +do, and suck at everything else. The good news is that people tend to +naturally gravitate back to what they are good at, so it's not like you +are doing something irreversible when you **do** prod them in some +direction, just don't push too hard. + + +4) Placing blame +---------------- + +Things will go wrong, and people want somebody to blame. Tag, you're it. + +It's not actually that hard to accept the blame, especially if people +kind of realize that it wasn't **all** your fault. Which brings us to the +best way of taking the blame: do it for someone else. You'll feel good +for taking the fall, they'll feel good about not getting blamed, and the +person who lost their whole 36GB porn-collection because of your +incompetence will grudgingly admit that you at least didn't try to weasel +out of it. + +Then make the developer who really screwed up (if you can find them) know +**in_private** that they screwed up. Not just so they can avoid it in the +future, but so that they know they owe you one. And, perhaps even more +importantly, they're also likely the person who can fix it. Because, let's +face it, it sure ain't you. + +Taking the blame is also why you get to be manager in the first place. +It's part of what makes people trust you, and allow you the potential +glory, because you're the one who gets to say "I screwed up". And if +you've followed the previous rules, you'll be pretty good at saying that +by now. + + +5) Things to avoid +------------------ + +There's one thing people hate even more than being called "d*ckhead", +and that is being called a "d*ckhead" in a sanctimonious voice. The +first you can apologize for, the second one you won't really get the +chance. They likely will no longer be listening even if you otherwise +do a good job. + +We all think we're better than anybody else, which means that when +somebody else puts on airs, it **really** rubs us the wrong way. You may +be morally and intellectually superior to everybody around you, but +don't try to make it too obvious unless you really **intend** to irritate +somebody [#f3]_. + +Similarly, don't be too polite or subtle about things. Politeness easily +ends up going overboard and hiding the problem, and as they say, "On the +internet, nobody can hear you being subtle". Use a big blunt object to +hammer the point in, because you can't really depend on people getting +your point otherwise. + +Some humor can help pad both the bluntness and the moralizing. Going +overboard to the point of being ridiculous can drive a point home +without making it painful to the recipient, who just thinks you're being +silly. It can thus help get through the personal mental block we all +have about criticism. + +.. [#f3] Hint: internet newsgroups that are not directly related to your work + are great ways to take out your frustrations at other people. Write + insulting posts with a sneer just to get into a good flame every once in + a while, and you'll feel cleansed. Just don't crap too close to home. + + +6) Why me? +---------- + +Since your main responsibility seems to be to take the blame for other +peoples mistakes, and make it painfully obvious to everybody else that +you're incompetent, the obvious question becomes one of why do it in the +first place? + +First off, while you may or may not get screaming teenage girls (or +boys, let's not be judgmental or sexist here) knocking on your dressing +room door, you **will** get an immense feeling of personal accomplishment +for being "in charge". Never mind the fact that you're really leading +by trying to keep up with everybody else and running after them as fast +as you can. Everybody will still think you're the person in charge. + +It's a great job if you can hack it. diff --git a/Documentation/process/stable-api-nonsense.rst b/Documentation/process/stable-api-nonsense.rst new file mode 100644 index 000000000..24f5aeece --- /dev/null +++ b/Documentation/process/stable-api-nonsense.rst @@ -0,0 +1,205 @@ +.. _stable_api_nonsense: + +The Linux Kernel Driver Interface +================================== + +(all of your questions answered and then some) + +Greg Kroah-Hartman <greg@kroah.com> + +This is being written to try to explain why Linux **does not have a binary +kernel interface, nor does it have a stable kernel interface**. + +.. note:: + + Please realize that this article describes the **in kernel** interfaces, not + the kernel to userspace interfaces. + + The kernel to userspace interface is the one that application programs use, + the syscall interface. That interface is **very** stable over time, and + will not break. I have old programs that were built on a pre 0.9something + kernel that still work just fine on the latest 2.6 kernel release. + That interface is the one that users and application programmers can count + on being stable. + + +Executive Summary +----------------- +You think you want a stable kernel interface, but you really do not, and +you don't even know it. What you want is a stable running driver, and +you get that only if your driver is in the main kernel tree. You also +get lots of other good benefits if your driver is in the main kernel +tree, all of which has made Linux into such a strong, stable, and mature +operating system which is the reason you are using it in the first +place. + + +Intro +----- + +It's only the odd person who wants to write a kernel driver that needs +to worry about the in-kernel interfaces changing. For the majority of +the world, they neither see this interface, nor do they care about it at +all. + +First off, I'm not going to address **any** legal issues about closed +source, hidden source, binary blobs, source wrappers, or any other term +that describes kernel drivers that do not have their source code +released under the GPL. Please consult a lawyer if you have any legal +questions, I'm a programmer and hence, I'm just going to be describing +the technical issues here (not to make light of the legal issues, they +are real, and you do need to be aware of them at all times.) + +So, there are two main topics here, binary kernel interfaces and stable +kernel source interfaces. They both depend on each other, but we will +discuss the binary stuff first to get it out of the way. + + +Binary Kernel Interface +----------------------- +Assuming that we had a stable kernel source interface for the kernel, a +binary interface would naturally happen too, right? Wrong. Please +consider the following facts about the Linux kernel: + + - Depending on the version of the C compiler you use, different kernel + data structures will contain different alignment of structures, and + possibly include different functions in different ways (putting + functions inline or not.) The individual function organization + isn't that important, but the different data structure padding is + very important. + + - Depending on what kernel build options you select, a wide range of + different things can be assumed by the kernel: + + - different structures can contain different fields + - Some functions may not be implemented at all, (i.e. some locks + compile away to nothing for non-SMP builds.) + - Memory within the kernel can be aligned in different ways, + depending on the build options. + + - Linux runs on a wide range of different processor architectures. + There is no way that binary drivers from one architecture will run + on another architecture properly. + +Now a number of these issues can be addressed by simply compiling your +module for the exact specific kernel configuration, using the same exact +C compiler that the kernel was built with. This is sufficient if you +want to provide a module for a specific release version of a specific +Linux distribution. But multiply that single build by the number of +different Linux distributions and the number of different supported +releases of the Linux distribution and you quickly have a nightmare of +different build options on different releases. Also realize that each +Linux distribution release contains a number of different kernels, all +tuned to different hardware types (different processor types and +different options), so for even a single release you will need to create +multiple versions of your module. + +Trust me, you will go insane over time if you try to support this kind +of release, I learned this the hard way a long time ago... + + +Stable Kernel Source Interfaces +------------------------------- + +This is a much more "volatile" topic if you talk to people who try to +keep a Linux kernel driver that is not in the main kernel tree up to +date over time. + +Linux kernel development is continuous and at a rapid pace, never +stopping to slow down. As such, the kernel developers find bugs in +current interfaces, or figure out a better way to do things. If they do +that, they then fix the current interfaces to work better. When they do +so, function names may change, structures may grow or shrink, and +function parameters may be reworked. If this happens, all of the +instances of where this interface is used within the kernel are fixed up +at the same time, ensuring that everything continues to work properly. + +As a specific examples of this, the in-kernel USB interfaces have +undergone at least three different reworks over the lifetime of this +subsystem. These reworks were done to address a number of different +issues: + + - A change from a synchronous model of data streams to an asynchronous + one. This reduced the complexity of a number of drivers and + increased the throughput of all USB drivers such that we are now + running almost all USB devices at their maximum speed possible. + - A change was made in the way data packets were allocated from the + USB core by USB drivers so that all drivers now needed to provide + more information to the USB core to fix a number of documented + deadlocks. + +This is in stark contrast to a number of closed source operating systems +which have had to maintain their older USB interfaces over time. This +provides the ability for new developers to accidentally use the old +interfaces and do things in improper ways, causing the stability of the +operating system to suffer. + +In both of these instances, all developers agreed that these were +important changes that needed to be made, and they were made, with +relatively little pain. If Linux had to ensure that it will preserve a +stable source interface, a new interface would have been created, and +the older, broken one would have had to be maintained over time, leading +to extra work for the USB developers. Since all Linux USB developers do +their work on their own time, asking programmers to do extra work for no +gain, for free, is not a possibility. + +Security issues are also very important for Linux. When a +security issue is found, it is fixed in a very short amount of time. A +number of times this has caused internal kernel interfaces to be +reworked to prevent the security problem from occurring. When this +happens, all drivers that use the interfaces were also fixed at the +same time, ensuring that the security problem was fixed and could not +come back at some future time accidentally. If the internal interfaces +were not allowed to change, fixing this kind of security problem and +insuring that it could not happen again would not be possible. + +Kernel interfaces are cleaned up over time. If there is no one using a +current interface, it is deleted. This ensures that the kernel remains +as small as possible, and that all potential interfaces are tested as +well as they can be (unused interfaces are pretty much impossible to +test for validity.) + + +What to do +---------- + +So, if you have a Linux kernel driver that is not in the main kernel +tree, what are you, a developer, supposed to do? Releasing a binary +driver for every different kernel version for every distribution is a +nightmare, and trying to keep up with an ever changing kernel interface +is also a rough job. + +Simple, get your kernel driver into the main kernel tree (remember we +are talking about GPL released drivers here, if your code doesn't fall +under this category, good luck, you are on your own here, you leech +<insert link to leech comment from Andrew and Linus here>.) If your +driver is in the tree, and a kernel interface changes, it will be fixed +up by the person who did the kernel change in the first place. This +ensures that your driver is always buildable, and works over time, with +very little effort on your part. + +The very good side effects of having your driver in the main kernel tree +are: + + - The quality of the driver will rise as the maintenance costs (to the + original developer) will decrease. + - Other developers will add features to your driver. + - Other people will find and fix bugs in your driver. + - Other people will find tuning opportunities in your driver. + - Other people will update the driver for you when external interface + changes require it. + - The driver automatically gets shipped in all Linux distributions + without having to ask the distros to add it. + +As Linux supports a larger number of different devices "out of the box" +than any other operating system, and it supports these devices on more +different processor architectures than any other operating system, this +proven type of development model must be doing something right :) + + + +------ + +Thanks to Randy Dunlap, Andrew Morton, David Brownell, Hanna Linder, +Robert Love, and Nishanth Aravamudan for their review and comments on +early drafts of this paper. diff --git a/Documentation/process/stable-kernel-rules.rst b/Documentation/process/stable-kernel-rules.rst new file mode 100644 index 000000000..e5561d78b --- /dev/null +++ b/Documentation/process/stable-kernel-rules.rst @@ -0,0 +1,193 @@ +.. _stable_kernel_rules: + +Everything you ever wanted to know about Linux -stable releases +=============================================================== + +Rules on what kind of patches are accepted, and which ones are not, into the +"-stable" tree: + + - It must be obviously correct and tested. + - It cannot be bigger than 100 lines, with context. + - It must fix only one thing. + - It must fix a real bug that bothers people (not a, "This could be a + problem..." type thing). + - It must fix a problem that causes a build error (but not for things + marked CONFIG_BROKEN), an oops, a hang, data corruption, a real + security issue, or some "oh, that's not good" issue. In short, something + critical. + - Serious issues as reported by a user of a distribution kernel may also + be considered if they fix a notable performance or interactivity issue. + As these fixes are not as obvious and have a higher risk of a subtle + regression they should only be submitted by a distribution kernel + maintainer and include an addendum linking to a bugzilla entry if it + exists and additional information on the user-visible impact. + - New device IDs and quirks are also accepted. + - No "theoretical race condition" issues, unless an explanation of how the + race can be exploited is also provided. + - It cannot contain any "trivial" fixes in it (spelling changes, + whitespace cleanups, etc). + - It must follow the + :ref:`Documentation/process/submitting-patches.rst <submittingpatches>` + rules. + - It or an equivalent fix must already exist in Linus' tree (upstream). + + +Procedure for submitting patches to the -stable tree +---------------------------------------------------- + + - If the patch covers files in net/ or drivers/net please follow netdev stable + submission guidelines as described in + :ref:`Documentation/networking/netdev-FAQ.rst <netdev-FAQ>` + after first checking the stable networking queue at + https://patchwork.ozlabs.org/bundle/davem/stable/?series=&submitter=&state=*&q=&archive= + to ensure the requested patch is not already queued up. + - Security patches should not be handled (solely) by the -stable review + process but should follow the procedures in + :ref:`Documentation/admin-guide/security-bugs.rst <securitybugs>`. + +For all other submissions, choose one of the following procedures +----------------------------------------------------------------- + +.. _option_1: + +Option 1 +******** + +To have the patch automatically included in the stable tree, add the tag + +.. code-block:: none + + Cc: stable@vger.kernel.org + +in the sign-off area. Once the patch is merged it will be applied to +the stable tree without anything else needing to be done by the author +or subsystem maintainer. + +.. _option_2: + +Option 2 +******** + +After the patch has been merged to Linus' tree, send an email to +stable@vger.kernel.org containing the subject of the patch, the commit ID, +why you think it should be applied, and what kernel version you wish it to +be applied to. + +.. _option_3: + +Option 3 +******** + +Send the patch, after verifying that it follows the above rules, to +stable@vger.kernel.org. You must note the upstream commit ID in the +changelog of your submission, as well as the kernel version you wish +it to be applied to. + +:ref:`option_1` is **strongly** preferred, is the easiest and most common. +:ref:`option_2` and :ref:`option_3` are more useful if the patch isn't deemed +worthy at the time it is applied to a public git tree (for instance, because +it deserves more regression testing first). :ref:`option_3` is especially +useful if the patch needs some special handling to apply to an older kernel +(e.g., if API's have changed in the meantime). + +Note that for :ref:`option_3`, if the patch deviates from the original +upstream patch (for example because it had to be backported) this must be very +clearly documented and justified in the patch description. + +The upstream commit ID must be specified with a separate line above the commit +text, like this: + +.. code-block:: none + + commit <sha1> upstream. + +Additionally, some patches submitted via Option 1 may have additional patch +prerequisites which can be cherry-picked. This can be specified in the following +format in the sign-off area: + +.. code-block:: none + + Cc: <stable@vger.kernel.org> # 3.3.x: a1f84a3: sched: Check for idle + Cc: <stable@vger.kernel.org> # 3.3.x: 1b9508f: sched: Rate-limit newidle + Cc: <stable@vger.kernel.org> # 3.3.x: fd21073: sched: Fix affinity logic + Cc: <stable@vger.kernel.org> # 3.3.x + Signed-off-by: Ingo Molnar <mingo@elte.hu> + +The tag sequence has the meaning of: + +.. code-block:: none + + git cherry-pick a1f84a3 + git cherry-pick 1b9508f + git cherry-pick fd21073 + git cherry-pick <this commit> + +Also, some patches may have kernel version prerequisites. This can be +specified in the following format in the sign-off area: + +.. code-block:: none + + Cc: <stable@vger.kernel.org> # 3.3.x + +The tag has the meaning of: + +.. code-block:: none + + git cherry-pick <this commit> + +For each "-stable" tree starting with the specified version. + +Following the submission: + + - The sender will receive an ACK when the patch has been accepted into the + queue, or a NAK if the patch is rejected. This response might take a few + days, according to the developer's schedules. + - If accepted, the patch will be added to the -stable queue, for review by + other developers and by the relevant subsystem maintainer. + + +Review cycle +------------ + + - When the -stable maintainers decide for a review cycle, the patches will be + sent to the review committee, and the maintainer of the affected area of + the patch (unless the submitter is the maintainer of the area) and CC: to + the linux-kernel mailing list. + - The review committee has 48 hours in which to ACK or NAK the patch. + - If the patch is rejected by a member of the committee, or linux-kernel + members object to the patch, bringing up issues that the maintainers and + members did not realize, the patch will be dropped from the queue. + - At the end of the review cycle, the ACKed patches will be added to the + latest -stable release, and a new -stable release will happen. + - Security patches will be accepted into the -stable tree directly from the + security kernel team, and not go through the normal review cycle. + Contact the kernel security team for more details on this procedure. + +Trees +----- + + - The queues of patches, for both completed versions and in progress + versions can be found at: + + https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git + + - The finalized and tagged releases of all stable kernels can be found + in separate branches per version at: + + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git + + - The release candidate of all stable kernel versions can be found at: + + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/ + + .. warning:: + The -stable-rc tree is a snapshot in time of the stable-queue tree and + will change frequently, hence will be rebased often. It should only be + used for testing purposes (e.g. to be consumed by CI systems). + + +Review committee +---------------- + + - This is made up of a number of kernel developers who have volunteered for + this task, and a few that haven't. diff --git a/Documentation/process/submit-checklist.rst b/Documentation/process/submit-checklist.rst new file mode 100644 index 000000000..367353c54 --- /dev/null +++ b/Documentation/process/submit-checklist.rst @@ -0,0 +1,122 @@ +.. _submitchecklist: + +Linux Kernel patch submission checklist +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Here are some basic things that developers should do if they want to see their +kernel patch submissions accepted more quickly. + +These are all above and beyond the documentation that is provided in +:ref:`Documentation/process/submitting-patches.rst <submittingpatches>` +and elsewhere regarding submitting Linux kernel patches. + + +1) If you use a facility then #include the file that defines/declares + that facility. Don't depend on other header files pulling in ones + that you use. + +2) Builds cleanly: + + a) with applicable or modified ``CONFIG`` options ``=y``, ``=m``, and + ``=n``. No ``gcc`` warnings/errors, no linker warnings/errors. + + b) Passes ``allnoconfig``, ``allmodconfig`` + + c) Builds successfully when using ``O=builddir`` + +3) Builds on multiple CPU architectures by using local cross-compile tools + or some other build farm. + +4) ppc64 is a good architecture for cross-compilation checking because it + tends to use ``unsigned long`` for 64-bit quantities. + +5) Check your patch for general style as detailed in + :ref:`Documentation/process/coding-style.rst <codingstyle>`. + Check for trivial violations with the patch style checker prior to + submission (``scripts/checkpatch.pl``). + You should be able to justify all violations that remain in + your patch. + +6) Any new or modified ``CONFIG`` options do not muck up the config menu and + default to off unless they meet the exception criteria documented in + ``Documentation/kbuild/kconfig-language.txt`` Menu attributes: default value. + +7) All new ``Kconfig`` options have help text. + +8) Has been carefully reviewed with respect to relevant ``Kconfig`` + combinations. This is very hard to get right with testing -- brainpower + pays off here. + +9) Check cleanly with sparse. + +10) Use ``make checkstack`` and ``make namespacecheck`` and fix any problems + that they find. + + .. note:: + + ``checkstack`` does not point out problems explicitly, + but any one function that uses more than 512 bytes on the stack is a + candidate for change. + +11) Include :ref:`kernel-doc <kernel_doc>` to document global kernel APIs. + (Not required for static functions, but OK there also.) Use + ``make htmldocs`` or ``make pdfdocs`` to check the + :ref:`kernel-doc <kernel_doc>` and fix any issues. + +12) Has been tested with ``CONFIG_PREEMPT``, ``CONFIG_DEBUG_PREEMPT``, + ``CONFIG_DEBUG_SLAB``, ``CONFIG_DEBUG_PAGEALLOC``, ``CONFIG_DEBUG_MUTEXES``, + ``CONFIG_DEBUG_SPINLOCK``, ``CONFIG_DEBUG_ATOMIC_SLEEP``, + ``CONFIG_PROVE_RCU`` and ``CONFIG_DEBUG_OBJECTS_RCU_HEAD`` all + simultaneously enabled. + +13) Has been build- and runtime tested with and without ``CONFIG_SMP`` and + ``CONFIG_PREEMPT.`` + +14) If the patch affects IO/Disk, etc: has been tested with and without + ``CONFIG_LBDAF.`` + +15) All codepaths have been exercised with all lockdep features enabled. + +16) All new ``/proc`` entries are documented under ``Documentation/`` + +17) All new kernel boot parameters are documented in + ``Documentation/admin-guide/kernel-parameters.rst``. + +18) All new module parameters are documented with ``MODULE_PARM_DESC()`` + +19) All new userspace interfaces are documented in ``Documentation/ABI/``. + See ``Documentation/ABI/README`` for more information. + Patches that change userspace interfaces should be CCed to + linux-api@vger.kernel.org. + +20) Check that it all passes ``make headers_check``. + +21) Has been checked with injection of at least slab and page-allocation + failures. See ``Documentation/fault-injection/``. + + If the new code is substantial, addition of subsystem-specific fault + injection might be appropriate. + +22) Newly-added code has been compiled with ``gcc -W`` (use + ``make EXTRA_CFLAGS=-W``). This will generate lots of noise, but is good + for finding bugs like "warning: comparison between signed and unsigned". + +23) Tested after it has been merged into the -mm patchset to make sure + that it still works with all of the other queued patches and various + changes in the VM, VFS, and other subsystems. + +24) All memory barriers {e.g., ``barrier()``, ``rmb()``, ``wmb()``} need a + comment in the source code that explains the logic of what they are doing + and why. + +25) If any ioctl's are added by the patch, then also update + ``Documentation/ioctl/ioctl-number.txt``. + +26) If your modified source code depends on or uses any of the kernel + APIs or features that are related to the following ``Kconfig`` symbols, + then test multiple builds with the related ``Kconfig`` symbols disabled + and/or ``=m`` (if that option is available) [not all of these at the + same time, just various/random combinations of them]: + + ``CONFIG_SMP``, ``CONFIG_SYSFS``, ``CONFIG_PROC_FS``, ``CONFIG_INPUT``, ``CONFIG_PCI``, ``CONFIG_BLOCK``, ``CONFIG_PM``, ``CONFIG_MAGIC_SYSRQ``, + ``CONFIG_NET``, ``CONFIG_INET=n`` (but latter with ``CONFIG_NET=y``). diff --git a/Documentation/process/submitting-drivers.rst b/Documentation/process/submitting-drivers.rst new file mode 100644 index 000000000..b38bf2054 --- /dev/null +++ b/Documentation/process/submitting-drivers.rst @@ -0,0 +1,191 @@ +.. _submittingdrivers: + +Submitting Drivers For The Linux Kernel +======================================= + +This document is intended to explain how to submit device drivers to the +various kernel trees. Note that if you are interested in video card drivers +you should probably talk to XFree86 (http://www.xfree86.org/) and/or X.Org +(http://x.org/) instead. + +.. note:: + + This document is old and has seen little maintenance in recent years; it + should probably be updated or, perhaps better, just deleted. Most of + what is here can be found in the other development documents anyway. + + Oh, and we don't really recommend submitting changes to XFree86 :) + +Also read the Documentation/process/submitting-patches.rst document. + + +Allocating Device Numbers +------------------------- + +Major and minor numbers for block and character devices are allocated +by the Linux assigned name and number authority (currently this is +Torben Mathiasen). The site is http://www.lanana.org/. This +also deals with allocating numbers for devices that are not going to +be submitted to the mainstream kernel. +See Documentation/admin-guide/devices.rst for more information on this. + +If you don't use assigned numbers then when your device is submitted it will +be given an assigned number even if that is different from values you may +have shipped to customers before. + +Who To Submit Drivers To +------------------------ + +Linux 2.0: + No new drivers are accepted for this kernel tree. + +Linux 2.2: + No new drivers are accepted for this kernel tree. + +Linux 2.4: + If the code area has a general maintainer then please submit it to + the maintainer listed in MAINTAINERS in the kernel file. If the + maintainer does not respond or you cannot find the appropriate + maintainer then please contact Willy Tarreau <w@1wt.eu>. + +Linux 2.6 and upper: + The same rules apply as 2.4 except that you should follow linux-kernel + to track changes in API's. The final contact point for Linux 2.6+ + submissions is Andrew Morton. + +What Criteria Determine Acceptance +---------------------------------- + +Licensing: + The code must be released to us under the + GNU General Public License. We don't insist on any kind + of exclusive GPL licensing, and if you wish the driver + to be useful to other communities such as BSD you may well + wish to release under multiple licenses. + See accepted licenses at include/linux/module.h + +Copyright: + The copyright owner must agree to use of GPL. + It's best if the submitter and copyright owner + are the same person/entity. If not, the name of + the person/entity authorizing use of GPL should be + listed in case it's necessary to verify the will of + the copyright owner. + +Interfaces: + If your driver uses existing interfaces and behaves like + other drivers in the same class it will be much more likely + to be accepted than if it invents gratuitous new ones. + If you need to implement a common API over Linux and NT + drivers do it in userspace. + +Code: + Please use the Linux style of code formatting as documented + in :ref:`Documentation/process/coding-style.rst <codingStyle>`. + If you have sections of code + that need to be in other formats, for example because they + are shared with a windows driver kit and you want to + maintain them just once separate them out nicely and note + this fact. + +Portability: + Pointers are not always 32bits, not all computers are little + endian, people do not all have floating point and you + shouldn't use inline x86 assembler in your driver without + careful thought. Pure x86 drivers generally are not popular. + If you only have x86 hardware it is hard to test portability + but it is easy to make sure the code can easily be made + portable. + +Clarity: + It helps if anyone can see how to fix the driver. It helps + you because you get patches not bug reports. If you submit a + driver that intentionally obfuscates how the hardware works + it will go in the bitbucket. + +PM support: + Since Linux is used on many portable and desktop systems, your + driver is likely to be used on such a system and therefore it + should support basic power management by implementing, if + necessary, the .suspend and .resume methods used during the + system-wide suspend and resume transitions. You should verify + that your driver correctly handles the suspend and resume, but + if you are unable to ensure that, please at least define the + .suspend method returning the -ENOSYS ("Function not + implemented") error. You should also try to make sure that your + driver uses as little power as possible when it's not doing + anything. For the driver testing instructions see + Documentation/power/drivers-testing.txt and for a relatively + complete overview of the power management issues related to + drivers see Documentation/driver-api/pm/devices.rst. + +Control: + In general if there is active maintenance of a driver by + the author then patches will be redirected to them unless + they are totally obvious and without need of checking. + If you want to be the contact and update point for the + driver it is a good idea to state this in the comments, + and include an entry in MAINTAINERS for your driver. + +What Criteria Do Not Determine Acceptance +----------------------------------------- + +Vendor: + Being the hardware vendor and maintaining the driver is + often a good thing. If there is a stable working driver from + other people already in the tree don't expect 'we are the + vendor' to get your driver chosen. Ideally work with the + existing driver author to build a single perfect driver. + +Author: + It doesn't matter if a large Linux company wrote the driver, + or you did. Nobody has any special access to the kernel + tree. Anyone who tells you otherwise isn't telling the + whole story. + + +Resources +--------- + +Linux kernel master tree: + ftp.\ *country_code*\ .kernel.org:/pub/linux/kernel/... + + where *country_code* == your country code, such as + **us**, **uk**, **fr**, etc. + + http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git + +Linux kernel mailing list: + linux-kernel@vger.kernel.org + [mail majordomo@vger.kernel.org to subscribe] + +Linux Device Drivers, Third Edition (covers 2.6.10): + http://lwn.net/Kernel/LDD3/ (free version) + +LWN.net: + Weekly summary of kernel development activity - http://lwn.net/ + + 2.6 API changes: + + http://lwn.net/Articles/2.6-kernel-api/ + + Porting drivers from prior kernels to 2.6: + + http://lwn.net/Articles/driver-porting/ + +KernelNewbies: + Documentation and assistance for new kernel programmers + + http://kernelnewbies.org/ + +Linux USB project: + http://www.linux-usb.org/ + +How to NOT write kernel driver by Arjan van de Ven: + http://www.fenrus.org/how-to-not-write-a-device-driver-paper.pdf + +Kernel Janitor: + http://kernelnewbies.org/KernelJanitors + +GIT, Fast Version Control System: + http://git-scm.com/ diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst new file mode 100644 index 000000000..3739c1ce6 --- /dev/null +++ b/Documentation/process/submitting-patches.rst @@ -0,0 +1,842 @@ +.. _submittingpatches: + +Submitting patches: the essential guide to getting your code into the kernel +============================================================================ + +For a person or company who wishes to submit a change to the Linux +kernel, the process can sometimes be daunting if you're not familiar +with "the system." This text is a collection of suggestions which +can greatly increase the chances of your change being accepted. + +This document contains a large number of suggestions in a relatively terse +format. For detailed information on how the kernel development process +works, see :ref:`Documentation/process <development_process_main>`. +Also, read :ref:`Documentation/process/submit-checklist.rst <submitchecklist>` +for a list of items to check before +submitting code. If you are submitting a driver, also read +:ref:`Documentation/process/submitting-drivers.rst <submittingdrivers>`; +for device tree binding patches, read +Documentation/devicetree/bindings/submitting-patches.txt. + +Many of these steps describe the default behavior of the ``git`` version +control system; if you use ``git`` to prepare your patches, you'll find much +of the mechanical work done for you, though you'll still need to prepare +and document a sensible set of patches. In general, use of ``git`` will make +your life as a kernel developer easier. + +0) Obtain a current source tree +------------------------------- + +If you do not have a repository with the current kernel source handy, use +``git`` to obtain one. You'll want to start with the mainline repository, +which can be grabbed with:: + + git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git + +Note, however, that you may not want to develop against the mainline tree +directly. Most subsystem maintainers run their own trees and want to see +patches prepared against those trees. See the **T:** entry for the subsystem +in the MAINTAINERS file to find that tree, or simply ask the maintainer if +the tree is not listed there. + +It is still possible to download kernel releases via tarballs (as described +in the next section), but that is the hard way to do kernel development. + +1) ``diff -up`` +--------------- + +If you must generate your patches by hand, use ``diff -up`` or ``diff -uprN`` +to create patches. Git generates patches in this form by default; if +you're using ``git``, you can skip this section entirely. + +All changes to the Linux kernel occur in the form of patches, as +generated by :manpage:`diff(1)`. When creating your patch, make sure to +create it in "unified diff" format, as supplied by the ``-u`` argument +to :manpage:`diff(1)`. +Also, please use the ``-p`` argument which shows which C function each +change is in - that makes the resultant ``diff`` a lot easier to read. +Patches should be based in the root kernel source directory, +not in any lower subdirectory. + +To create a patch for a single file, it is often sufficient to do:: + + SRCTREE= linux + MYFILE= drivers/net/mydriver.c + + cd $SRCTREE + cp $MYFILE $MYFILE.orig + vi $MYFILE # make your change + cd .. + diff -up $SRCTREE/$MYFILE{.orig,} > /tmp/patch + +To create a patch for multiple files, you should unpack a "vanilla", +or unmodified kernel source tree, and generate a ``diff`` against your +own source tree. For example:: + + MYSRC= /devel/linux + + tar xvfz linux-3.19.tar.gz + mv linux-3.19 linux-3.19-vanilla + diff -uprN -X linux-3.19-vanilla/Documentation/dontdiff \ + linux-3.19-vanilla $MYSRC > /tmp/patch + +``dontdiff`` is a list of files which are generated by the kernel during +the build process, and should be ignored in any :manpage:`diff(1)`-generated +patch. + +Make sure your patch does not include any extra files which do not +belong in a patch submission. Make sure to review your patch -after- +generating it with :manpage:`diff(1)`, to ensure accuracy. + +If your changes produce a lot of deltas, you need to split them into +individual patches which modify things in logical stages; see +:ref:`split_changes`. This will facilitate review by other kernel developers, +very important if you want your patch accepted. + +If you're using ``git``, ``git rebase -i`` can help you with this process. If +you're not using ``git``, ``quilt`` <http://savannah.nongnu.org/projects/quilt> +is another popular alternative. + +.. _describe_changes: + +2) Describe your changes +------------------------ + +Describe your problem. Whether your patch is a one-line bug fix or +5000 lines of a new feature, there must be an underlying problem that +motivated you to do this work. Convince the reviewer that there is a +problem worth fixing and that it makes sense for them to read past the +first paragraph. + +Describe user-visible impact. Straight up crashes and lockups are +pretty convincing, but not all bugs are that blatant. Even if the +problem was spotted during code review, describe the impact you think +it can have on users. Keep in mind that the majority of Linux +installations run kernels from secondary stable trees or +vendor/product-specific trees that cherry-pick only specific patches +from upstream, so include anything that could help route your change +downstream: provoking circumstances, excerpts from dmesg, crash +descriptions, performance regressions, latency spikes, lockups, etc. + +Quantify optimizations and trade-offs. If you claim improvements in +performance, memory consumption, stack footprint, or binary size, +include numbers that back them up. But also describe non-obvious +costs. Optimizations usually aren't free but trade-offs between CPU, +memory, and readability; or, when it comes to heuristics, between +different workloads. Describe the expected downsides of your +optimization so that the reviewer can weigh costs against benefits. + +Once the problem is established, describe what you are actually doing +about it in technical detail. It's important to describe the change +in plain English for the reviewer to verify that the code is behaving +as you intend it to. + +The maintainer will thank you if you write your patch description in a +form which can be easily pulled into Linux's source code management +system, ``git``, as a "commit log". See :ref:`the_canonical_patch_format`. + +Solve only one problem per patch. If your description starts to get +long, that's a sign that you probably need to split up your patch. +See :ref:`split_changes`. + +When you submit or resubmit a patch or patch series, include the +complete patch description and justification for it. Don't just +say that this is version N of the patch (series). Don't expect the +subsystem maintainer to refer back to earlier patch versions or referenced +URLs to find the patch description and put that into the patch. +I.e., the patch (series) and its description should be self-contained. +This benefits both the maintainers and reviewers. Some reviewers +probably didn't even receive earlier versions of the patch. + +Describe your changes in imperative mood, e.g. "make xyzzy do frotz" +instead of "[This patch] makes xyzzy do frotz" or "[I] changed xyzzy +to do frotz", as if you are giving orders to the codebase to change +its behaviour. + +If the patch fixes a logged bug entry, refer to that bug entry by +number and URL. If the patch follows from a mailing list discussion, +give a URL to the mailing list archive; use the https://lkml.kernel.org/ +redirector with a ``Message-Id``, to ensure that the links cannot become +stale. + +However, try to make your explanation understandable without external +resources. In addition to giving a URL to a mailing list archive or +bug, summarize the relevant points of the discussion that led to the +patch as submitted. + +If you want to refer to a specific commit, don't just refer to the +SHA-1 ID of the commit. Please also include the oneline summary of +the commit, to make it easier for reviewers to know what it is about. +Example:: + + Commit e21d2170f36602ae2708 ("video: remove unnecessary + platform_set_drvdata()") removed the unnecessary + platform_set_drvdata(), but left the variable "dev" unused, + delete it. + +You should also be sure to use at least the first twelve characters of the +SHA-1 ID. The kernel repository holds a *lot* of objects, making +collisions with shorter IDs a real possibility. Bear in mind that, even if +there is no collision with your six-character ID now, that condition may +change five years from now. + +If your patch fixes a bug in a specific commit, e.g. you found an issue using +``git bisect``, please use the 'Fixes:' tag with the first 12 characters of +the SHA-1 ID, and the one line summary. For example:: + + Fixes: e21d2170f366 ("video: remove unnecessary platform_set_drvdata()") + +The following ``git config`` settings can be used to add a pretty format for +outputting the above style in the ``git log`` or ``git show`` commands:: + + [core] + abbrev = 12 + [pretty] + fixes = Fixes: %h (\"%s\") + +.. _split_changes: + +3) Separate your changes +------------------------ + +Separate each **logical change** into a separate patch. + +For example, if your changes include both bug fixes and performance +enhancements for a single driver, separate those changes into two +or more patches. If your changes include an API update, and a new +driver which uses that new API, separate those into two patches. + +On the other hand, if you make a single change to numerous files, +group those changes into a single patch. Thus a single logical change +is contained within a single patch. + +The point to remember is that each patch should make an easily understood +change that can be verified by reviewers. Each patch should be justifiable +on its own merits. + +If one patch depends on another patch in order for a change to be +complete, that is OK. Simply note **"this patch depends on patch X"** +in your patch description. + +When dividing your change into a series of patches, take special care to +ensure that the kernel builds and runs properly after each patch in the +series. Developers using ``git bisect`` to track down a problem can end up +splitting your patch series at any point; they will not thank you if you +introduce bugs in the middle. + +If you cannot condense your patch set into a smaller set of patches, +then only post say 15 or so at a time and wait for review and integration. + + + +4) Style-check your changes +--------------------------- + +Check your patch for basic style violations, details of which can be +found in +:ref:`Documentation/process/coding-style.rst <codingstyle>`. +Failure to do so simply wastes +the reviewers time and will get your patch rejected, probably +without even being read. + +One significant exception is when moving code from one file to +another -- in this case you should not modify the moved code at all in +the same patch which moves it. This clearly delineates the act of +moving the code and your changes. This greatly aids review of the +actual differences and allows tools to better track the history of +the code itself. + +Check your patches with the patch style checker prior to submission +(scripts/checkpatch.pl). Note, though, that the style checker should be +viewed as a guide, not as a replacement for human judgment. If your code +looks better with a violation then its probably best left alone. + +The checker reports at three levels: + - ERROR: things that are very likely to be wrong + - WARNING: things requiring careful review + - CHECK: things requiring thought + +You should be able to justify all violations that remain in your +patch. + + +5) Select the recipients for your patch +--------------------------------------- + +You should always copy the appropriate subsystem maintainer(s) on any patch +to code that they maintain; look through the MAINTAINERS file and the +source code revision history to see who those maintainers are. The +script scripts/get_maintainer.pl can be very useful at this step. If you +cannot find a maintainer for the subsystem you are working on, Andrew +Morton (akpm@linux-foundation.org) serves as a maintainer of last resort. + +You should also normally choose at least one mailing list to receive a copy +of your patch set. linux-kernel@vger.kernel.org functions as a list of +last resort, but the volume on that list has caused a number of developers +to tune it out. Look in the MAINTAINERS file for a subsystem-specific +list; your patch will probably get more attention there. Please do not +spam unrelated lists, though. + +Many kernel-related lists are hosted on vger.kernel.org; you can find a +list of them at http://vger.kernel.org/vger-lists.html. There are +kernel-related lists hosted elsewhere as well, though. + +Do not send more than 15 patches at once to the vger mailing lists!!! + +Linus Torvalds is the final arbiter of all changes accepted into the +Linux kernel. His e-mail address is <torvalds@linux-foundation.org>. +He gets a lot of e-mail, and, at this point, very few patches go through +Linus directly, so typically you should do your best to -avoid- +sending him e-mail. + +If you have a patch that fixes an exploitable security bug, send that patch +to security@kernel.org. For severe bugs, a short embargo may be considered +to allow distributors to get the patch out to users; in such cases, +obviously, the patch should not be sent to any public lists. + +Patches that fix a severe bug in a released kernel should be directed +toward the stable maintainers by putting a line like this:: + + Cc: stable@vger.kernel.org + +into the sign-off area of your patch (note, NOT an email recipient). You +should also read +:ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>` +in addition to this file. + +Note, however, that some subsystem maintainers want to come to their own +conclusions on which patches should go to the stable trees. The networking +maintainer, in particular, would rather not see individual developers +adding lines like the above to their patches. + +If changes affect userland-kernel interfaces, please send the MAN-PAGES +maintainer (as listed in the MAINTAINERS file) a man-pages patch, or at +least a notification of the change, so that some information makes its way +into the manual pages. User-space API changes should also be copied to +linux-api@vger.kernel.org. + +For small patches you may want to CC the Trivial Patch Monkey +trivial@kernel.org which collects "trivial" patches. Have a look +into the MAINTAINERS file for its current manager. + +Trivial patches must qualify for one of the following rules: + +- Spelling fixes in documentation +- Spelling fixes for errors which could break :manpage:`grep(1)` +- Warning fixes (cluttering with useless warnings is bad) +- Compilation fixes (only if they are actually correct) +- Runtime fixes (only if they actually fix things) +- Removing use of deprecated functions/macros +- Contact detail and documentation fixes +- Non-portable code replaced by portable code (even in arch-specific, + since people copy, as long as it's trivial) +- Any fix by the author/maintainer of the file (ie. patch monkey + in re-transmission mode) + + + +6) No MIME, no links, no compression, no attachments. Just plain text +---------------------------------------------------------------------- + +Linus and other kernel developers need to be able to read and comment +on the changes you are submitting. It is important for a kernel +developer to be able to "quote" your changes, using standard e-mail +tools, so that they may comment on specific portions of your code. + +For this reason, all patches should be submitted by e-mail "inline". + +.. warning:: + + Be wary of your editor's word-wrap corrupting your patch, + if you choose to cut-n-paste your patch. + +Do not attach the patch as a MIME attachment, compressed or not. +Many popular e-mail applications will not always transmit a MIME +attachment as plain text, making it impossible to comment on your +code. A MIME attachment also takes Linus a bit more time to process, +decreasing the likelihood of your MIME-attached change being accepted. + +Exception: If your mailer is mangling patches then someone may ask +you to re-send them using MIME. + +See :ref:`Documentation/process/email-clients.rst <email_clients>` +for hints about configuring your e-mail client so that it sends your patches +untouched. + +7) E-mail size +-------------- + +Large changes are not appropriate for mailing lists, and some +maintainers. If your patch, uncompressed, exceeds 300 kB in size, +it is preferred that you store your patch on an Internet-accessible +server, and provide instead a URL (link) pointing to your patch. But note +that if your patch exceeds 300 kB, it almost certainly needs to be broken up +anyway. + +8) Respond to review comments +----------------------------- + +Your patch will almost certainly get comments from reviewers on ways in +which the patch can be improved. You must respond to those comments; +ignoring reviewers is a good way to get ignored in return. Review comments +or questions that do not lead to a code change should almost certainly +bring about a comment or changelog entry so that the next reviewer better +understands what is going on. + +Be sure to tell the reviewers what changes you are making and to thank them +for their time. Code review is a tiring and time-consuming process, and +reviewers sometimes get grumpy. Even in that case, though, respond +politely and address the problems they have pointed out. + + +9) Don't get discouraged - or impatient +--------------------------------------- + +After you have submitted your change, be patient and wait. Reviewers are +busy people and may not get to your patch right away. + +Once upon a time, patches used to disappear into the void without comment, +but the development process works more smoothly than that now. You should +receive comments within a week or so; if that does not happen, make sure +that you have sent your patches to the right place. Wait for a minimum of +one week before resubmitting or pinging reviewers - possibly longer during +busy times like merge windows. + + +10) Include PATCH in the subject +-------------------------------- + +Due to high e-mail traffic to Linus, and to linux-kernel, it is common +convention to prefix your subject line with [PATCH]. This lets Linus +and other kernel developers more easily distinguish patches from other +e-mail discussions. + + + +11) Sign your work - the Developer's Certificate of Origin +---------------------------------------------------------- + +To improve tracking of who did what, especially with patches that can +percolate to their final resting place in the kernel through several +layers of maintainers, we've introduced a "sign-off" procedure on +patches that are being emailed around. + +The sign-off is a simple line at the end of the explanation for the +patch, which certifies that you wrote it or otherwise have the right to +pass it on as an open-source patch. The rules are pretty simple: if you +can certify the below: + +Developer's Certificate of Origin 1.1 +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +By making a contribution to this project, I certify that: + + (a) The contribution was created in whole or in part by me and I + have the right to submit it under the open source license + indicated in the file; or + + (b) The contribution is based upon previous work that, to the best + of my knowledge, is covered under an appropriate open source + license and I have the right under that license to submit that + work with modifications, whether created in whole or in part + by me, under the same open source license (unless I am + permitted to submit under a different license), as indicated + in the file; or + + (c) The contribution was provided directly to me by some other + person who certified (a), (b) or (c) and I have not modified + it. + + (d) I understand and agree that this project and the contribution + are public and that a record of the contribution (including all + personal information I submit with it, including my sign-off) is + maintained indefinitely and may be redistributed consistent with + this project or the open source license(s) involved. + +then you just add a line saying:: + + Signed-off-by: Random J Developer <random@developer.example.org> + +using your real name (sorry, no pseudonyms or anonymous contributions.) + +Some people also put extra tags at the end. They'll just be ignored for +now, but you can do this to mark internal company procedures or just +point out some special detail about the sign-off. + +If you are a subsystem or branch maintainer, sometimes you need to slightly +modify patches you receive in order to merge them, because the code is not +exactly the same in your tree and the submitters'. If you stick strictly to +rule (c), you should ask the submitter to rediff, but this is a totally +counter-productive waste of time and energy. Rule (b) allows you to adjust +the code, but then it is very impolite to change one submitter's code and +make him endorse your bugs. To solve this problem, it is recommended that +you add a line between the last Signed-off-by header and yours, indicating +the nature of your changes. While there is nothing mandatory about this, it +seems like prepending the description with your mail and/or name, all +enclosed in square brackets, is noticeable enough to make it obvious that +you are responsible for last-minute changes. Example:: + + Signed-off-by: Random J Developer <random@developer.example.org> + [lucky@maintainer.example.org: struct foo moved from foo.c to foo.h] + Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org> + +This practice is particularly helpful if you maintain a stable branch and +want at the same time to credit the author, track changes, merge the fix, +and protect the submitter from complaints. Note that under no circumstances +can you change the author's identity (the From header), as it is the one +which appears in the changelog. + +Special note to back-porters: It seems to be a common and useful practice +to insert an indication of the origin of a patch at the top of the commit +message (just after the subject line) to facilitate tracking. For instance, +here's what we see in a 3.x-stable release:: + + Date: Tue Oct 7 07:26:38 2014 -0400 + + libata: Un-break ATA blacklist + + commit 1c40279960bcd7d52dbdf1d466b20d24b99176c8 upstream. + +And here's what might appear in an older kernel once a patch is backported:: + + Date: Tue May 13 22:12:27 2008 +0200 + + wireless, airo: waitbusy() won't delay + + [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a] + +Whatever the format, this information provides a valuable help to people +tracking your trees, and to people trying to troubleshoot bugs in your +tree. + + +12) When to use Acked-by:, Cc:, and Co-Developed-by: +------------------------------------------------------- + +The Signed-off-by: tag indicates that the signer was involved in the +development of the patch, or that he/she was in the patch's delivery path. + +If a person was not directly involved in the preparation or handling of a +patch but wishes to signify and record their approval of it then they can +ask to have an Acked-by: line added to the patch's changelog. + +Acked-by: is often used by the maintainer of the affected code when that +maintainer neither contributed to nor forwarded the patch. + +Acked-by: is not as formal as Signed-off-by:. It is a record that the acker +has at least reviewed the patch and has indicated acceptance. Hence patch +mergers will sometimes manually convert an acker's "yep, looks good to me" +into an Acked-by: (but note that it is usually better to ask for an +explicit ack). + +Acked-by: does not necessarily indicate acknowledgement of the entire patch. +For example, if a patch affects multiple subsystems and has an Acked-by: from +one subsystem maintainer then this usually indicates acknowledgement of just +the part which affects that maintainer's code. Judgement should be used here. +When in doubt people should refer to the original discussion in the mailing +list archives. + +If a person has had the opportunity to comment on a patch, but has not +provided such comments, you may optionally add a ``Cc:`` tag to the patch. +This is the only tag which might be added without an explicit action by the +person it names - but it should indicate that this person was copied on the +patch. This tag documents that potentially interested parties +have been included in the discussion. + +A Co-Developed-by: states that the patch was also created by another developer +along with the original author. This is useful at times when multiple people +work on a single patch. Note, this person also needs to have a Signed-off-by: +line in the patch as well. + + +13) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes: +-------------------------------------------------------------------------- + +The Reported-by tag gives credit to people who find bugs and report them and it +hopefully inspires them to help us again in the future. Please note that if +the bug was reported in private, then ask for permission first before using the +Reported-by tag. + +A Tested-by: tag indicates that the patch has been successfully tested (in +some environment) by the person named. This tag informs maintainers that +some testing has been performed, provides a means to locate testers for +future patches, and ensures credit for the testers. + +Reviewed-by:, instead, indicates that the patch has been reviewed and found +acceptable according to the Reviewer's Statement: + +Reviewer's statement of oversight +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +By offering my Reviewed-by: tag, I state that: + + (a) I have carried out a technical review of this patch to + evaluate its appropriateness and readiness for inclusion into + the mainline kernel. + + (b) Any problems, concerns, or questions relating to the patch + have been communicated back to the submitter. I am satisfied + with the submitter's response to my comments. + + (c) While there may be things that could be improved with this + submission, I believe that it is, at this time, (1) a + worthwhile modification to the kernel, and (2) free of known + issues which would argue against its inclusion. + + (d) While I have reviewed the patch and believe it to be sound, I + do not (unless explicitly stated elsewhere) make any + warranties or guarantees that it will achieve its stated + purpose or function properly in any given situation. + +A Reviewed-by tag is a statement of opinion that the patch is an +appropriate modification of the kernel without any remaining serious +technical issues. Any interested reviewer (who has done the work) can +offer a Reviewed-by tag for a patch. This tag serves to give credit to +reviewers and to inform maintainers of the degree of review which has been +done on the patch. Reviewed-by: tags, when supplied by reviewers known to +understand the subject area and to perform thorough reviews, will normally +increase the likelihood of your patch getting into the kernel. + +A Suggested-by: tag indicates that the patch idea is suggested by the person +named and ensures credit to the person for the idea. Please note that this +tag should not be added without the reporter's permission, especially if the +idea was not posted in a public forum. That said, if we diligently credit our +idea reporters, they will, hopefully, be inspired to help us again in the +future. + +A Fixes: tag indicates that the patch fixes an issue in a previous commit. It +is used to make it easy to determine where a bug originated, which can help +review a bug fix. This tag also assists the stable kernel team in determining +which stable kernel versions should receive your fix. This is the preferred +method for indicating a bug fixed by the patch. See :ref:`describe_changes` +for more details. + +.. _the_canonical_patch_format: + +14) The canonical patch format +------------------------------ + +This section describes how the patch itself should be formatted. Note +that, if you have your patches stored in a ``git`` repository, proper patch +formatting can be had with ``git format-patch``. The tools cannot create +the necessary text, though, so read the instructions below anyway. + +The canonical patch subject line is:: + + Subject: [PATCH 001/123] subsystem: summary phrase + +The canonical patch message body contains the following: + + - A ``from`` line specifying the patch author, followed by an empty + line (only needed if the person sending the patch is not the author). + + - The body of the explanation, line wrapped at 75 columns, which will + be copied to the permanent changelog to describe this patch. + + - An empty line. + + - The ``Signed-off-by:`` lines, described above, which will + also go in the changelog. + + - A marker line containing simply ``---``. + + - Any additional comments not suitable for the changelog. + + - The actual patch (``diff`` output). + +The Subject line format makes it very easy to sort the emails +alphabetically by subject line - pretty much any email reader will +support that - since because the sequence number is zero-padded, +the numerical and alphabetic sort is the same. + +The ``subsystem`` in the email's Subject should identify which +area or subsystem of the kernel is being patched. + +The ``summary phrase`` in the email's Subject should concisely +describe the patch which that email contains. The ``summary +phrase`` should not be a filename. Do not use the same ``summary +phrase`` for every patch in a whole patch series (where a ``patch +series`` is an ordered sequence of multiple, related patches). + +Bear in mind that the ``summary phrase`` of your email becomes a +globally-unique identifier for that patch. It propagates all the way +into the ``git`` changelog. The ``summary phrase`` may later be used in +developer discussions which refer to the patch. People will want to +google for the ``summary phrase`` to read discussion regarding that +patch. It will also be the only thing that people may quickly see +when, two or three months later, they are going through perhaps +thousands of patches using tools such as ``gitk`` or ``git log +--oneline``. + +For these reasons, the ``summary`` must be no more than 70-75 +characters, and it must describe both what the patch changes, as well +as why the patch might be necessary. It is challenging to be both +succinct and descriptive, but that is what a well-written summary +should do. + +The ``summary phrase`` may be prefixed by tags enclosed in square +brackets: "Subject: [PATCH <tag>...] <summary phrase>". The tags are +not considered part of the summary phrase, but describe how the patch +should be treated. Common tags might include a version descriptor if +the multiple versions of the patch have been sent out in response to +comments (i.e., "v1, v2, v3"), or "RFC" to indicate a request for +comments. If there are four patches in a patch series the individual +patches may be numbered like this: 1/4, 2/4, 3/4, 4/4. This assures +that developers understand the order in which the patches should be +applied and that they have reviewed or applied all of the patches in +the patch series. + +A couple of example Subjects:: + + Subject: [PATCH 2/5] ext2: improve scalability of bitmap searching + Subject: [PATCH v2 01/27] x86: fix eflags tracking + +The ``from`` line must be the very first line in the message body, +and has the form: + + From: Original Author <author@example.com> + +The ``from`` line specifies who will be credited as the author of the +patch in the permanent changelog. If the ``from`` line is missing, +then the ``From:`` line from the email header will be used to determine +the patch author in the changelog. + +The explanation body will be committed to the permanent source +changelog, so should make sense to a competent reader who has long +since forgotten the immediate details of the discussion that might +have led to this patch. Including symptoms of the failure which the +patch addresses (kernel log messages, oops messages, etc.) is +especially useful for people who might be searching the commit logs +looking for the applicable patch. If a patch fixes a compile failure, +it may not be necessary to include _all_ of the compile failures; just +enough that it is likely that someone searching for the patch can find +it. As in the ``summary phrase``, it is important to be both succinct as +well as descriptive. + +The ``---`` marker line serves the essential purpose of marking for patch +handling tools where the changelog message ends. + +One good use for the additional comments after the ``---`` marker is for +a ``diffstat``, to show what files have changed, and the number of +inserted and deleted lines per file. A ``diffstat`` is especially useful +on bigger patches. Other comments relevant only to the moment or the +maintainer, not suitable for the permanent changelog, should also go +here. A good example of such comments might be ``patch changelogs`` +which describe what has changed between the v1 and v2 version of the +patch. + +If you are going to include a ``diffstat`` after the ``---`` marker, please +use ``diffstat`` options ``-p 1 -w 70`` so that filenames are listed from +the top of the kernel source tree and don't use too much horizontal +space (easily fit in 80 columns, maybe with some indentation). (``git`` +generates appropriate diffstats by default.) + +See more details on the proper patch format in the following +references. + +.. _explicit_in_reply_to: + +15) Explicit In-Reply-To headers +-------------------------------- + +It can be helpful to manually add In-Reply-To: headers to a patch +(e.g., when using ``git send-email``) to associate the patch with +previous relevant discussion, e.g. to link a bug fix to the email with +the bug report. However, for a multi-patch series, it is generally +best to avoid using In-Reply-To: to link to older versions of the +series. This way multiple versions of the patch don't become an +unmanageable forest of references in email clients. If a link is +helpful, you can use the https://lkml.kernel.org/ redirector (e.g., in +the cover email text) to link to an earlier version of the patch series. + + +16) Sending ``git pull`` requests +--------------------------------- + +If you have a series of patches, it may be most convenient to have the +maintainer pull them directly into the subsystem repository with a +``git pull`` operation. Note, however, that pulling patches from a developer +requires a higher degree of trust than taking patches from a mailing list. +As a result, many subsystem maintainers are reluctant to take pull +requests, especially from new, unknown developers. If in doubt you can use +the pull request as the cover letter for a normal posting of the patch +series, giving the maintainer the option of using either. + +A pull request should have [GIT PULL] in the subject line. The +request itself should include the repository name and the branch of +interest on a single line; it should look something like:: + + Please pull from + + git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus + + to get these changes: + +A pull request should also include an overall message saying what will be +included in the request, a ``git shortlog`` listing of the patches +themselves, and a ``diffstat`` showing the overall effect of the patch series. +The easiest way to get all this information together is, of course, to let +``git`` do it for you with the ``git request-pull`` command. + +Some maintainers (including Linus) want to see pull requests from signed +commits; that increases their confidence that the request actually came +from you. Linus, in particular, will not pull from public hosting sites +like GitHub in the absence of a signed tag. + +The first step toward creating such tags is to make a GNUPG key and get it +signed by one or more core kernel developers. This step can be hard for +new developers, but there is no way around it. Attending conferences can +be a good way to find developers who can sign your key. + +Once you have prepared a patch series in ``git`` that you wish to have somebody +pull, create a signed tag with ``git tag -s``. This will create a new tag +identifying the last commit in the series and containing a signature +created with your private key. You will also have the opportunity to add a +changelog-style message to the tag; this is an ideal place to describe the +effects of the pull request as a whole. + +If the tree the maintainer will be pulling from is not the repository you +are working from, don't forget to push the signed tag explicitly to the +public tree. + +When generating your pull request, use the signed tag as the target. A +command like this will do the trick:: + + git request-pull master git://my.public.tree/linux.git my-signed-tag + + +References +---------- + +Andrew Morton, "The perfect patch" (tpp). + <http://www.ozlabs.org/~akpm/stuff/tpp.txt> + +Jeff Garzik, "Linux kernel patch submission format". + <http://linux.yyz.us/patch-format.html> + +Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer". + <http://www.kroah.com/log/linux/maintainer.html> + + <http://www.kroah.com/log/linux/maintainer-02.html> + + <http://www.kroah.com/log/linux/maintainer-03.html> + + <http://www.kroah.com/log/linux/maintainer-04.html> + + <http://www.kroah.com/log/linux/maintainer-05.html> + + <http://www.kroah.com/log/linux/maintainer-06.html> + +NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people! + <https://lkml.org/lkml/2005/7/11/336> + +Kernel Documentation/process/coding-style.rst: + :ref:`Documentation/process/coding-style.rst <codingstyle>` + +Linus Torvalds's mail on the canonical patch format: + <http://lkml.org/lkml/2005/4/7/183> + +Andi Kleen, "On submitting kernel patches" + Some strategies to get difficult or controversial changes in. + + http://halobates.de/on-submitting-patches.pdf diff --git a/Documentation/process/volatile-considered-harmful.rst b/Documentation/process/volatile-considered-harmful.rst new file mode 100644 index 000000000..4934e656a --- /dev/null +++ b/Documentation/process/volatile-considered-harmful.rst @@ -0,0 +1,125 @@ + +.. _volatile_considered_harmful: + +Why the "volatile" type class should not be used +------------------------------------------------ + +C programmers have often taken volatile to mean that the variable could be +changed outside of the current thread of execution; as a result, they are +sometimes tempted to use it in kernel code when shared data structures are +being used. In other words, they have been known to treat volatile types +as a sort of easy atomic variable, which they are not. The use of volatile in +kernel code is almost never correct; this document describes why. + +The key point to understand with regard to volatile is that its purpose is +to suppress optimization, which is almost never what one really wants to +do. In the kernel, one must protect shared data structures against +unwanted concurrent access, which is very much a different task. The +process of protecting against unwanted concurrency will also avoid almost +all optimization-related problems in a more efficient way. + +Like volatile, the kernel primitives which make concurrent access to data +safe (spinlocks, mutexes, memory barriers, etc.) are designed to prevent +unwanted optimization. If they are being used properly, there will be no +need to use volatile as well. If volatile is still necessary, there is +almost certainly a bug in the code somewhere. In properly-written kernel +code, volatile can only serve to slow things down. + +Consider a typical block of kernel code:: + + spin_lock(&the_lock); + do_something_on(&shared_data); + do_something_else_with(&shared_data); + spin_unlock(&the_lock); + +If all the code follows the locking rules, the value of shared_data cannot +change unexpectedly while the_lock is held. Any other code which might +want to play with that data will be waiting on the lock. The spinlock +primitives act as memory barriers - they are explicitly written to do so - +meaning that data accesses will not be optimized across them. So the +compiler might think it knows what will be in shared_data, but the +spin_lock() call, since it acts as a memory barrier, will force it to +forget anything it knows. There will be no optimization problems with +accesses to that data. + +If shared_data were declared volatile, the locking would still be +necessary. But the compiler would also be prevented from optimizing access +to shared_data _within_ the critical section, when we know that nobody else +can be working with it. While the lock is held, shared_data is not +volatile. When dealing with shared data, proper locking makes volatile +unnecessary - and potentially harmful. + +The volatile storage class was originally meant for memory-mapped I/O +registers. Within the kernel, register accesses, too, should be protected +by locks, but one also does not want the compiler "optimizing" register +accesses within a critical section. But, within the kernel, I/O memory +accesses are always done through accessor functions; accessing I/O memory +directly through pointers is frowned upon and does not work on all +architectures. Those accessors are written to prevent unwanted +optimization, so, once again, volatile is unnecessary. + +Another situation where one might be tempted to use volatile is +when the processor is busy-waiting on the value of a variable. The right +way to perform a busy wait is:: + + while (my_variable != what_i_want) + cpu_relax(); + +The cpu_relax() call can lower CPU power consumption or yield to a +hyperthreaded twin processor; it also happens to serve as a compiler +barrier, so, once again, volatile is unnecessary. Of course, busy- +waiting is generally an anti-social act to begin with. + +There are still a few rare situations where volatile makes sense in the +kernel: + + - The above-mentioned accessor functions might use volatile on + architectures where direct I/O memory access does work. Essentially, + each accessor call becomes a little critical section on its own and + ensures that the access happens as expected by the programmer. + + - Inline assembly code which changes memory, but which has no other + visible side effects, risks being deleted by GCC. Adding the volatile + keyword to asm statements will prevent this removal. + + - The jiffies variable is special in that it can have a different value + every time it is referenced, but it can be read without any special + locking. So jiffies can be volatile, but the addition of other + variables of this type is strongly frowned upon. Jiffies is considered + to be a "stupid legacy" issue (Linus's words) in this regard; fixing it + would be more trouble than it is worth. + + - Pointers to data structures in coherent memory which might be modified + by I/O devices can, sometimes, legitimately be volatile. A ring buffer + used by a network adapter, where that adapter changes pointers to + indicate which descriptors have been processed, is an example of this + type of situation. + +For most code, none of the above justifications for volatile apply. As a +result, the use of volatile is likely to be seen as a bug and will bring +additional scrutiny to the code. Developers who are tempted to use +volatile should take a step back and think about what they are truly trying +to accomplish. + +Patches to remove volatile variables are generally welcome - as long as +they come with a justification which shows that the concurrency issues have +been properly thought through. + + +References +========== + +[1] http://lwn.net/Articles/233481/ + +[2] http://lwn.net/Articles/233482/ + +Credits +======= + +Original impetus and research by Randy Dunlap + +Written by Jonathan Corbet + +Improvements via comments from Satyam Sharma, Johannes Stezenbach, Jesper +Juhl, Heikki Orsila, H. Peter Anvin, Philipp Hahn, and Stefan +Richter. |