diff options
Diffstat (limited to 'Documentation/sound/cards/serial-u16550.rst')
| -rw-r--r-- | Documentation/sound/cards/serial-u16550.rst | 93 |
1 files changed, 93 insertions, 0 deletions
diff --git a/Documentation/sound/cards/serial-u16550.rst b/Documentation/sound/cards/serial-u16550.rst new file mode 100644 index 000000000..197aeacea --- /dev/null +++ b/Documentation/sound/cards/serial-u16550.rst @@ -0,0 +1,93 @@ +=================================== +Serial UART 16450/16550 MIDI driver +=================================== + +The adaptor module parameter allows you to select either: + +* 0 - Roland Soundcanvas support (default) +* 1 - Midiator MS-124T support (1) +* 2 - Midiator MS-124W S/A mode (2) +* 3 - MS-124W M/B mode support (3) +* 4 - Generic device with multiple input support (4) + +For the Midiator MS-124W, you must set the physical M-S and A-B +switches on the Midiator to match the driver mode you select. + +In Roland Soundcanvas mode, multiple ALSA raw MIDI substreams are supported +(midiCnD0-midiCnD15). Whenever you write to a different substream, the driver +sends the nonstandard MIDI command sequence F5 NN, where NN is the substream +number plus 1. Roland modules use this command to switch between different +"parts", so this feature lets you treat each part as a distinct raw MIDI +substream. The driver provides no way to send F5 00 (no selection) or to not +send the F5 NN command sequence at all; perhaps it ought to. + +Usage example for simple serial converter: +:: + + /sbin/setserial /dev/ttyS0 uart none + /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 speed=115200 + +Usage example for Roland SoundCanvas with 4 MIDI ports: +:: + + /sbin/setserial /dev/ttyS0 uart none + /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 outs=4 + +In MS-124T mode, one raw MIDI substream is supported (midiCnD0); the outs +module parameter is automatically set to 1. The driver sends the same data to +all four MIDI Out connectors. Set the A-B switch and the speed module +parameter to match (A=19200, B=9600). + +Usage example for MS-124T, with A-B switch in A position: +:: + + /sbin/setserial /dev/ttyS0 uart none + /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 adaptor=1 \ + speed=19200 + +In MS-124W S/A mode, one raw MIDI substream is supported (midiCnD0); +the outs module parameter is automatically set to 1. The driver sends +the same data to all four MIDI Out connectors at full MIDI speed. + +Usage example for S/A mode: +:: + + /sbin/setserial /dev/ttyS0 uart none + /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 adaptor=2 + +In MS-124W M/B mode, the driver supports 16 ALSA raw MIDI substreams; +the outs module parameter is automatically set to 16. The substream +number gives a bitmask of which MIDI Out connectors the data should be +sent to, with midiCnD1 sending to Out 1, midiCnD2 to Out 2, midiCnD4 to +Out 3, and midiCnD8 to Out 4. Thus midiCnD15 sends the data to all 4 ports. +As a special case, midiCnD0 also sends to all ports, since it is not useful +to send the data to no ports. M/B mode has extra overhead to select the MIDI +Out for each byte, so the aggregate data rate across all four MIDI Outs is +at most one byte every 520 us, as compared with the full MIDI data rate of +one byte every 320 us per port. + +Usage example for M/B mode: +:: + + /sbin/setserial /dev/ttyS0 uart none + /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 adaptor=3 + +The MS-124W hardware's M/A mode is currently not supported. This mode allows +the MIDI Outs to act independently at double the aggregate throughput of M/B, +but does not allow sending the same byte simultaneously to multiple MIDI Outs. +The M/A protocol requires the driver to twiddle the modem control lines under +timing constraints, so it would be a bit more complicated to implement than +the other modes. + +Midiator models other than MS-124W and MS-124T are currently not supported. +Note that the suffix letter is significant; the MS-124 and MS-124B are not +compatible, nor are the other known models MS-101, MS-101B, MS-103, and MS-114. +I do have documentation (tim.mann@compaq.com) that partially covers these models, +but no units to experiment with. The MS-124W support is tested with a real unit. +The MS-124T support is untested, but should work. + +The Generic driver supports multiple input and output substreams over a single +serial port. Similar to Roland Soundcanvas mode, F5 NN is used to select the +appropriate input or output stream (depending on the data direction). +Additionally, the CTS signal is used to regulate the data flow. The number of +inputs is specified by the ins parameter. |