diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-qil_a9260.dts')
| -rw-r--r-- | arch/arm/boot/dts/at91-qil_a9260.dts | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts new file mode 100644 index 000000000..72e9148ca --- /dev/null +++ b/arch/arm/boot/dts/at91-qil_a9260.dts @@ -0,0 +1,215 @@ +/* + * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board + * + * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ +/dts-v1/; +#include "at91sam9260.dtsi" +/ { + model = "Calao QIL A9260"; + compatible = "calao,qil-a9260", "atmel,at91sam9260", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + }; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; + status = "okay"; + }; + + usart1: serial@fffb4000 { + pinctrl-0 = + <&pinctrl_usart1 + &pinctrl_usart1_rts + &pinctrl_usart1_cts>; + status = "okay"; + }; + + usart2: serial@fffb8000 { + pinctrl-0 = + <&pinctrl_usart2 + &pinctrl_usart2_rts + &pinctrl_usart2_cts>; + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + spi0: spi@fffc8000 { + status = "okay"; + cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>; + + m41t94@0 { + compatible = "st,m41t94"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + shdwc@fffffd10 { + atmel,wakeup-counter = <10>; + atmel,wakeup-rtt-timer; + }; + }; + + usb0: ohci@500000 { + num-ports = <2>; + status = "okay"; + }; + + ebi: ebi@10000000 { + status = "okay"; + + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@a0000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@c0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4c0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7cc0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + user_led { + label = "user_led"; + gpios = <&pioB 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&pioB 10 GPIO_ACTIVE_LOW>; + linux,code = <28>; + wakeup-source; + }; + }; + + i2c-gpio-0 { + status = "okay"; + }; +}; |