summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/dra72-evm-common.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/dra72-evm-common.dtsi')
-rw-r--r--arch/arm/boot/dts/dra72-evm-common.dtsi585
1 files changed, 585 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
new file mode 100644
index 000000000..e297b923b
--- /dev/null
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -0,0 +1,585 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra72x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
+
+/ {
+ compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
+
+ aliases {
+ display0 = &hdmi0;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ evm_12v0: fixedregulator-evm12v0 {
+ /* main supply */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_12v0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_5v0: fixedregulator-evm5v0 {
+ /* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
+ /* Output 1 of LM5140QRWGTQ1 on dra71-evm */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&evm_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_3v6: fixedregulator-evm_3v6 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v6";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+ vin-supply = <&evm_5v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vsys_3v3: fixedregulator-vsys3v3 {
+ /* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
+ /* Output 2 of LM5140QRWGTQ1 on dra71-evm */
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&evm_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_3v3_sw: fixedregulator-evm_3v3 {
+ /* TPS22965DSG */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vsys_3v3>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ aic_dvdd: fixedregulator-aic_dvdd {
+ /* TPS77018DBVT */
+ compatible = "regulator-fixed";
+ regulator-name = "aic_dvdd";
+ vin-supply = <&evm_3v3_sw>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ evm_3v3_sd: fixedregulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&evm_3v3_sw>;
+ enable-active-high;
+ gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ extcon_usb1: extcon_usb1 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ extcon_usb2: extcon_usb2 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+
+ tpd12s015: encoder {
+ compatible = "ti,tpd12s015";
+
+ gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */
+ <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
+ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ sound0: sound0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DRA7xx-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line Out",
+ "Microphone", "Mic Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC3L", "Mic Jack",
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ sound0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ system-clock-frequency = <5644800>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ clocks = <&atl_clkin2_ck>;
+ };
+ };
+
+ vmmcwl_fixed: fixedregulator-mmcwl {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcwl_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&dra7_pmx_core {
+ dcan1_pins_default: dcan1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+ DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
+ >;
+ };
+
+ dcan1_pins_sleep: dcan1_pins_sleep {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
+ DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pcf_lcd: gpio@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcf_gpio_21: gpio@21 {
+ compatible = "ti,pcf8575", "nxp,pcf8575";
+ reg = <0x21>;
+ lines-initial-states = <0x1408>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ tlv320aic3106: tlv320aic3106@19 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x19>;
+ adc-settle-ms = <40>;
+ ai3x-micbias-vg = <1>; /* 2.0V */
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&evm_3v3_sw>;
+ IOVDD-supply = <&evm_3v3_sw>;
+ DRVDD-supply = <&evm_3v3_sw>;
+ DVDD-supply = <&aic_dvdd>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pcf_hdmi: pcf8575@26 {
+ compatible = "ti,pcf8575", "nxp,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * initial state is used here to keep the mdio interface
+ * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
+ * VIN2_S0 driven high otherwise Ethernet stops working
+ * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
+ */
+ lines-initial-states = <0x0f2b>;
+
+ p1 {
+ /* vin6_sel_s0: high: VIN6, low: audio */
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "vin6_sel_s0";
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+ interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x3e0>;
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ /*
+ * For the existing IOdelay configuration via U-Boot we don't
+ * support NAND on dra72-evm. Keep it disabled. Enabling it
+ * requires a different configuration by U-Boot.
+ */
+ status = "disabled";
+ ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
+ nand@0,0 {
+ /* To use NAND, DIP switch SW5 must be set like so:
+ * SW5.1 (NAND_SELn) = ON (LOW)
+ * SW5.9 (GPMC_WPN) = OFF (HIGH)
+ */
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* device IO registers */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+ ti,nand-xfer-type = "prefetch-dma";
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <80>;
+ gpmc,cs-wr-off-ns = <80>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <60>;
+ gpmc,adv-wr-off-ns = <60>;
+ gpmc,we-on-ns = <10>;
+ gpmc,we-off-ns = <50>;
+ gpmc,oe-on-ns = <4>;
+ gpmc,oe-off-ns = <40>;
+ gpmc,access-ns = <40>;
+ gpmc,wr-access-ns = <80>;
+ gpmc,rd-cycle-ns = <80>;
+ gpmc,wr-cycle-ns = <80>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ /* MTD partition table */
+ /* All SPL-* partitions are sized to minimal length
+ * which can be independently programmable. For
+ * NAND flash this is equal to size of erase-block */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "NAND.SPL";
+ reg = <0x00000000 0x000020000>;
+ };
+ partition@1 {
+ label = "NAND.SPL.backup1";
+ reg = <0x00020000 0x00020000>;
+ };
+ partition@2 {
+ label = "NAND.SPL.backup2";
+ reg = <0x00040000 0x00020000>;
+ };
+ partition@3 {
+ label = "NAND.SPL.backup3";
+ reg = <0x00060000 0x00020000>;
+ };
+ partition@4 {
+ label = "NAND.u-boot-spl-os";
+ reg = <0x00080000 0x00040000>;
+ };
+ partition@5 {
+ label = "NAND.u-boot";
+ reg = <0x000c0000 0x00100000>;
+ };
+ partition@6 {
+ label = "NAND.u-boot-env";
+ reg = <0x001c0000 0x00020000>;
+ };
+ partition@7 {
+ label = "NAND.u-boot-env.backup1";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@8 {
+ label = "NAND.kernel";
+ reg = <0x00200000 0x00800000>;
+ };
+ partition@9 {
+ label = "NAND.file-system";
+ reg = <0x00a00000 0x0f600000>;
+ };
+ };
+};
+
+&omap_dwc3_1 {
+ extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+ extcon = <&extcon_usb2>;
+};
+
+&usb1 {
+ dr_mode = "otg";
+ extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+ dr_mode = "host";
+ extcon = <&extcon_usb2>;
+};
+
+&mmc1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+ vmmc-supply = <&evm_3v3_sd>;
+ bus-width = <4>;
+ /*
+ * SDCD signal is not being used here - using the fact that GPIO mode
+ * is a viable alternative
+ */
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+ max-frequency = <192000000>;
+};
+
+&mmc2 {
+ /* SW5-3 in ON position */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
+ bus-width = <8>;
+ non-removable;
+ max-frequency = <192000000>;
+};
+
+&mmc4 {
+ status = "okay";
+ vmmc-supply = <&evm_3v6>;
+ vqmmc-supply = <&vmmcwl_fixed>;
+ bus-width = <4>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ non-removable;
+ pinctrl-names = "default", "hs", "sdr12", "sdr25";
+ pinctrl-0 = <&mmc4_pins_default>;
+ pinctrl-1 = <&mmc4_pins_default>;
+ pinctrl-2 = <&mmc4_pins_default>;
+ pinctrl-3 = <&mmc4_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wifi@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&mac {
+ status = "okay";
+};
+
+&dcan1 {
+ status = "ok";
+ pinctrl-names = "default", "sleep", "active";
+ pinctrl-0 = <&dcan1_pins_sleep>;
+ pinctrl-1 = <&dcan1_pins_sleep>;
+ pinctrl-2 = <&dcan1_pins_default>;
+};
+
+&qspi {
+ status = "okay";
+
+ spi-max-frequency = <76800000>;
+ m25p80@0 {
+ compatible = "s25fl256s1";
+ spi-max-frequency = <76800000>;
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MTD partition table.
+ * The ROM checks the first four physical blocks
+ * for a valid file to boot and the flash here is
+ * 64KiB block size.
+ */
+ partition@0 {
+ label = "QSPI.SPL";
+ reg = <0x00000000 0x000010000>;
+ };
+ partition@1 {
+ label = "QSPI.SPL.backup1";
+ reg = <0x00010000 0x00010000>;
+ };
+ partition@2 {
+ label = "QSPI.SPL.backup2";
+ reg = <0x00020000 0x00010000>;
+ };
+ partition@3 {
+ label = "QSPI.SPL.backup3";
+ reg = <0x00030000 0x00010000>;
+ };
+ partition@4 {
+ label = "QSPI.u-boot";
+ reg = <0x00040000 0x00100000>;
+ };
+ partition@5 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x00140000 0x00080000>;
+ };
+ partition@6 {
+ label = "QSPI.u-boot-env";
+ reg = <0x001c0000 0x00010000>;
+ };
+ partition@7 {
+ label = "QSPI.u-boot-env.backup1";
+ reg = <0x001d0000 0x0010000>;
+ };
+ partition@8 {
+ label = "QSPI.kernel";
+ reg = <0x001e0000 0x0800000>;
+ };
+ partition@9 {
+ label = "QSPI.file-system";
+ reg = <0x009e0000 0x01620000>;
+ };
+ };
+};
+
+&dss {
+ status = "ok";
+};
+
+&hdmi {
+ status = "ok";
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
+
+&atl {
+ assigned-clocks = <&abe_dpll_sys_clk_mux>,
+ <&atl_clkctrl DRA7_ATL_CLKCTRL 26>,
+ <&dpll_abe_ck>,
+ <&dpll_abe_m2x2_ck>,
+ <&atl_clkin2_ck>;
+ assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+ assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+ status = "okay";
+
+ atl2 {
+ bws = <DRA7_ATL_WS_MCASP2_FSX>;
+ aws = <DRA7_ATL_WS_MCASP3_FSX>;
+ };
+};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+
+ assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
+ assigned-clock-parents = <&atl_clkin2_ck>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ status = "okay";
+ };
+};
+
+&pcie1_rc {
+ status = "okay";
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 08:28:26 +0000