diff options
Diffstat (limited to 'arch/arm/boot/dts/exynos5250-arndale.dts')
| -rw-r--r-- | arch/arm/boot/dts/exynos5250-arndale.dts | 572 |
1 files changed, 572 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts new file mode 100644 index 000000000..4ab1f1c66 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -0,0 +1,572 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos5250 based Arndale board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include "exynos5250.dtsi" + +/ { + model = "Insignal Arndale evaluation board based on EXYNOS5250"; + compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200"; + }; + + gpio_keys { + compatible = "gpio-keys"; + + menu { + label = "SW-TACT2"; + gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + wakeup-source; + }; + + home { + label = "SW-TACT3"; + gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + wakeup-source; + }; + + up { + label = "SW-TACT4"; + gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_UP>; + wakeup-source; + }; + + down { + label = "SW-TACT5"; + gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_DOWN>; + wakeup-source; + }; + + back { + label = "SW-TACT6"; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + wakeup-source; + }; + + wakeup { + label = "SW-TACT7"; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + main_dc_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "MAIN_DC"; + }; + + mmc_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "VDD_33ON_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 GPIO_ACTIVE_LOW>; + enable-active-high; + }; + + reg_hdmi_en: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "hdmi-en"; + }; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; + + // SMSC USB3503 connected in hardware only mode as a PHY + usb_hub: usb-hub { + compatible = "smsc,usb3503a"; + + reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>; + }; +}; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + +&dp { + status = "okay"; + samsung,color-space = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + + display-timings { + native-mode = <&timing0>; + + timing0: timing { + /* 2560x1600 DP panel */ + clock-frequency = <50000>; + hactive = <2560>; + vactive = <1600>; + hfront-porch = <48>; + hback-porch = <80>; + hsync-len = <32>; + vback-porch = <16>; + vfront-porch = <8>; + vsync-len = <6>; + }; + }; +}; + +&fimd { + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + status = "okay"; + ddc = <&i2c_ddc>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + vdd-supply = <&ldo8_reg>; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + samsung,i2c-slave-addr = <0x66>; + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq>; + + vinb1-supply = <&main_dc_reg>; + vinb2-supply = <&main_dc_reg>; + vinb3-supply = <&main_dc_reg>; + vinb4-supply = <&main_dc_reg>; + vinb5-supply = <&main_dc_reg>; + vinb6-supply = <&main_dc_reg>; + vinb7-supply = <&main_dc_reg>; + vinb8-supply = <&main_dc_reg>; + vinb9-supply = <&main_dc_reg>; + + vinl1-supply = <&buck7_reg>; + vinl2-supply = <&buck7_reg>; + vinl3-supply = <&buck7_reg>; + vinl4-supply = <&main_dc_reg>; + vinl5-supply = <&main_dc_reg>; + vinl6-supply = <&main_dc_reg>; + vinl7-supply = <&main_dc_reg>; + vinl8-supply = <&buck8_reg>; + vinl9-supply = <&buck8_reg>; + + s5m8767,pmic-buck2-dvs-voltage = <1300000>; + s5m8767,pmic-buck3-dvs-voltage = <1100000>; + s5m8767,pmic-buck4-dvs-voltage = <1200000>; + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>, + <&gpd1 1 GPIO_ACTIVE_HIGH>, + <&gpd1 2 GPIO_ACTIVE_HIGH>; + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>, + <&gpx2 4 GPIO_ACTIVE_HIGH>, + <&gpx2 5 GPIO_ACTIVE_HIGH>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_28IO_DP_1.35V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDD_COMMON1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_IOPERI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD_MPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD_XPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD_COMMON2_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD_33ON_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_COMMON3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_ABB2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD_USB_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_COMMON4_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDDQ_MMC2_3_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo18_reg: LDO18 { + regulator-name = "VDD_33ON_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + }; + + ldo22_reg: LDO22 { + regulator-name = "EXT_33_OFF"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; + }; + + ldo23_reg: LDO23 { + regulator-name = "EXT_28_OFF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + }; + + ldo25_reg: LDO25 { + regulator-name = "PVDD_LDO25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + op_mode = <1>; + }; + + ldo26_reg: LDO26 { + regulator-name = "EXT_18_OFF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDD_MEM_1.35V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1355000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck7_reg: BUCK7 { + regulator-name = "PVDD_BUCK7"; + regulator-always-on; + op_mode = <1>; + }; + + buck8_reg: BUCK8 { + regulator-name = "PVDD_BUCK8"; + regulator-always-on; + op_mode = <1>; + }; + + buck9_reg: BUCK9 { + regulator-name = "VDD_33_OFF_EXT1"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; + }; + }; + }; +}; + +&i2c_3 { + status = "okay"; + + wm1811a@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + + AVDD2-supply = <&main_dc_reg>; + CPVDD-supply = <&main_dc_reg>; + DBVDD1-supply = <&main_dc_reg>; + DBVDD2-supply = <&main_dc_reg>; + DBVDD3-supply = <&main_dc_reg>; + LDO1VDD-supply = <&main_dc_reg>; + SPKVDD1-supply = <&main_dc_reg>; + SPKVDD2-supply = <&main_dc_reg>; + + wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>; + wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c_8 { + status = "okay"; + /* used by HDMI PHY */ + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_9 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <40000>; + samsung,i2c-slave-addr = <0x38>; + + sata_phy_i2c:sata-phy@38 { + compatible = "samsung,exynos-sataphy-i2c"; + reg = <0x38>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mixer { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + vmmc-supply = <&mmc_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + vmmc-supply = <&mmc_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; +}; + +&pinctrl_0 { + s5m8767_irq: s5m8767-irq { + samsung,pins = "gpx3-2"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sata_phy { + status = "okay"; + samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; +}; + +&soc { + /* + * For unknown reasons HDMI-DDC does not work with Exynos I2C + * controllers. Lets use software I2C over GPIO pins as a workaround. + */ + i2c_ddc: i2c-gpio { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_gpio_bus>; + status = "okay"; + compatible = "i2c-gpio"; + gpios = <&gpa0 6 0 /* sda */ + &gpa0 7 0 /* scl */ + >; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; |