diff options
Diffstat (limited to 'arch/arm/boot/dts/stm32mp157-pinctrl.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 383 |
1 files changed, 383 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi new file mode 100644 index 000000000..c4851271e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -0,0 +1,383 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. + */ +#include <dt-bindings/pinctrl/stm32-pinfunc.h> + +/ { + soc { + pinctrl: pin-controller@50002000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-pinctrl"; + ranges = <0 0x50002000 0xa400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + pins-are-numbered; + + gpioa: gpio@50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc GPIOA>; + st,bank-name = "GPIOA"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc GPIOB>; + st,bank-name = "GPIOB"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc GPIOC>; + st,bank-name = "GPIOC"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&rcc GPIOD>; + st,bank-name = "GPIOD"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&rcc GPIOE>; + st,bank-name = "GPIOE"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&rcc GPIOF>; + st,bank-name = "GPIOF"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&rcc GPIOG>; + st,bank-name = "GPIOG"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&rcc GPIOH>; + st,bank-name = "GPIOH"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&rcc GPIOI>; + st,bank-name = "GPIOI"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@5000b000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x400>; + clocks = <&rcc GPIOJ>; + st,bank-name = "GPIOJ"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@5000c000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa000 0x400>; + clocks = <&rcc GPIOK>; + st,bank-name = "GPIOK"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; + + cec_pins_a: cec-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, AF4)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + ethernet0_rgmii_pins_a: rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + + i2c1_pins_a: i2c1-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_a: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_pins_a: i2c5-0 { + pins { + pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + + pwm2_pins_a: pwm2-0 { + pins { + pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_pins_a: pwm8-0 { + pins { + pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm12_pins_a: pwm12-0 { + pins { + pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + qspi_clk_pins_a: qspi-clk-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + qspi_bk1_pins_a: qspi-bk1-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <3>; + }; + }; + + qspi_bk2_pins_a: qspi-bk2-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <3>; + }; + }; + + uart4_pins_a: uart4-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-z-pinctrl"; + ranges = <0 0x54004000 0x400>; + pins-are-numbered; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + + gpioz: gpio@54004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&rcc GPIOZ>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; + + i2c4_pins_a: i2c4-0 { + pins { + pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + spi1_pins_a: spi1-0 { + pins1 { + pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; + }; + }; +}; |