1 files changed, 175 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
new file mode 100644
index 000000000..0a753b4c7
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -0,0 +1,175 @@
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+#include "at91sam9263.dtsi"
+
+/ {
+	model = "Calao USB A9263";
+	compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffa4000 {
+				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					reg = <0>;
+					spi-max-frequency = <15000000>;
+				};
+			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+		};
+
+		ebi0: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@a00000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+};