1 files changed, 509 insertions, 0 deletions
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
new file mode 100644
index 000000000..c7fa0c0ff
--- /dev/null
+++ b/arch/arm/include/asm/assembler.h
@@ -0,0 +1,509 @@
+/*
+ *  arch/arm/include/asm/assembler.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains arm architecture specific defines
+ *  for the different processors.
+ *
+ *  Do not include any C declarations in this file - it is included by
+ *  assembler source.
+ */
+#ifndef __ASM_ASSEMBLER_H__
+#define __ASM_ASSEMBLER_H__
+
+#ifndef __ASSEMBLY__
+#error "Only include this from assembly code"
+#endif
+
+#include <asm/ptrace.h>
+#include <asm/opcodes-virt.h>
+#include <asm/asm-offsets.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
+#include <asm/uaccess-asm.h>
+
+#define IOMEM(x)	(x)
+
+/*
+ * Endian independent macros for shifting bytes within registers.
+ */
+#ifndef __ARMEB__
+#define lspull          lsr
+#define lspush          lsl
+#define get_byte_0      lsl #0
+#define get_byte_1	lsr #8
+#define get_byte_2	lsr #16
+#define get_byte_3	lsr #24
+#define put_byte_0      lsl #0
+#define put_byte_1	lsl #8
+#define put_byte_2	lsl #16
+#define put_byte_3	lsl #24
+#else
+#define lspull          lsl
+#define lspush          lsr
+#define get_byte_0	lsr #24
+#define get_byte_1	lsr #16
+#define get_byte_2	lsr #8
+#define get_byte_3      lsl #0
+#define put_byte_0	lsl #24
+#define put_byte_1	lsl #16
+#define put_byte_2	lsl #8
+#define put_byte_3      lsl #0
+#endif
+
+/* Select code for any configuration running in BE8 mode */
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define ARM_BE8(code...) code
+#else
+#define ARM_BE8(code...)
+#endif
+
+/*
+ * Data preload for architectures that support it
+ */
+#if __LINUX_ARM_ARCH__ >= 5
+#define PLD(code...)	code
+#else
+#define PLD(code...)
+#endif
+
+/*
+ * This can be used to enable code to cacheline align the destination
+ * pointer when bulk writing to memory.  Experiments on StrongARM and
+ * XScale didn't show this a worthwhile thing to do when the cache is not
+ * set to write-allocate (this would need further testing on XScale when WA
+ * is used).
+ *
+ * On Feroceon there is much to gain however, regardless of cache mode.
+ */
+#ifdef CONFIG_CPU_FEROCEON
+#define CALGN(code...) code
+#else
+#define CALGN(code...)
+#endif
+
+#define IMM12_MASK 0xfff
+
+/*
+ * Enable and disable interrupts
+ */
+#if __LINUX_ARM_ARCH__ >= 6
+	.macro	disable_irq_notrace
+	cpsid	i
+	.endm
+
+	.macro	enable_irq_notrace
+	cpsie	i
+	.endm
+#else
+	.macro	disable_irq_notrace
+	msr	cpsr_c, #PSR_I_BIT | SVC_MODE
+	.endm
+
+	.macro	enable_irq_notrace
+	msr	cpsr_c, #SVC_MODE
+	.endm
+#endif
+
+#if __LINUX_ARM_ARCH__ < 7
+	.macro	dsb, args
+	mcr	p15, 0, r0, c7, c10, 4
+	.endm
+
+	.macro	isb, args
+	mcr	p15, 0, r0, c7, c5, 4
+	.endm
+#endif
+
+	.macro asm_trace_hardirqs_off, save=1
+#if defined(CONFIG_TRACE_IRQFLAGS)
+	.if \save
+	stmdb   sp!, {r0-r3, ip, lr}
+	.endif
+	bl	trace_hardirqs_off
+	.if \save
+	ldmia	sp!, {r0-r3, ip, lr}
+	.endif
+#endif
+	.endm
+
+	.macro asm_trace_hardirqs_on, cond=al, save=1
+#if defined(CONFIG_TRACE_IRQFLAGS)
+	/*
+	 * actually the registers should be pushed and pop'd conditionally, but
+	 * after bl the flags are certainly clobbered
+	 */
+	.if \save
+	stmdb   sp!, {r0-r3, ip, lr}
+	.endif
+	bl\cond	trace_hardirqs_on
+	.if \save
+	ldmia	sp!, {r0-r3, ip, lr}
+	.endif
+#endif
+	.endm
+
+	.macro disable_irq, save=1
+	disable_irq_notrace
+	asm_trace_hardirqs_off \save
+	.endm
+
+	.macro enable_irq
+	asm_trace_hardirqs_on
+	enable_irq_notrace
+	.endm
+/*
+ * Save the current IRQ state and disable IRQs.  Note that this macro
+ * assumes FIQs are enabled, and that the processor is in SVC mode.
+ */
+	.macro	save_and_disable_irqs, oldcpsr
+#ifdef CONFIG_CPU_V7M
+	mrs	\oldcpsr, primask
+#else
+	mrs	\oldcpsr, cpsr
+#endif
+	disable_irq
+	.endm
+
+	.macro	save_and_disable_irqs_notrace, oldcpsr
+#ifdef CONFIG_CPU_V7M
+	mrs	\oldcpsr, primask
+#else
+	mrs	\oldcpsr, cpsr
+#endif
+	disable_irq_notrace
+	.endm
+
+/*
+ * Restore interrupt state previously stored in a register.  We don't
+ * guarantee that this will preserve the flags.
+ */
+	.macro	restore_irqs_notrace, oldcpsr
+#ifdef CONFIG_CPU_V7M
+	msr	primask, \oldcpsr
+#else
+	msr	cpsr_c, \oldcpsr
+#endif
+	.endm
+
+	.macro restore_irqs, oldcpsr
+	tst	\oldcpsr, #PSR_I_BIT
+	asm_trace_hardirqs_on cond=eq
+	restore_irqs_notrace \oldcpsr
+	.endm
+
+/*
+ * Assembly version of "adr rd, BSYM(sym)".  This should only be used to
+ * reference local symbols in the same assembly file which are to be
+ * resolved by the assembler.  Other usage is undefined.
+ */
+	.irp	c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
+	.macro	badr\c, rd, sym
+#ifdef CONFIG_THUMB2_KERNEL
+	adr\c	\rd, \sym + 1
+#else
+	adr\c	\rd, \sym
+#endif
+	.endm
+	.endr
+
+/*
+ * Get current thread_info.
+ */
+	.macro	get_thread_info, rd
+ ARM(	mov	\rd, sp, lsr #THREAD_SIZE_ORDER + PAGE_SHIFT	)
+ THUMB(	mov	\rd, sp			)
+ THUMB(	lsr	\rd, \rd, #THREAD_SIZE_ORDER + PAGE_SHIFT	)
+	mov	\rd, \rd, lsl #THREAD_SIZE_ORDER + PAGE_SHIFT
+	.endm
+
+/*
+ * Increment/decrement the preempt count.
+ */
+#ifdef CONFIG_PREEMPT_COUNT
+	.macro	inc_preempt_count, ti, tmp
+	ldr	\tmp, [\ti, #TI_PREEMPT]	@ get preempt count
+	add	\tmp, \tmp, #1			@ increment it
+	str	\tmp, [\ti, #TI_PREEMPT]
+	.endm
+
+	.macro	dec_preempt_count, ti, tmp
+	ldr	\tmp, [\ti, #TI_PREEMPT]	@ get preempt count
+	sub	\tmp, \tmp, #1			@ decrement it
+	str	\tmp, [\ti, #TI_PREEMPT]
+	.endm
+
+	.macro	dec_preempt_count_ti, ti, tmp
+	get_thread_info \ti
+	dec_preempt_count \ti, \tmp
+	.endm
+#else
+	.macro	inc_preempt_count, ti, tmp
+	.endm
+
+	.macro	dec_preempt_count, ti, tmp
+	.endm
+
+	.macro	dec_preempt_count_ti, ti, tmp
+	.endm
+#endif
+
+#define USER(x...)				\
+9999:	x;					\
+	.pushsection __ex_table,"a";		\
+	.align	3;				\
+	.long	9999b,9001f;			\
+	.popsection
+
+#ifdef CONFIG_SMP
+#define ALT_SMP(instr...)					\
+9998:	instr
+/*
+ * Note: if you get assembler errors from ALT_UP() when building with
+ * CONFIG_THUMB2_KERNEL, you almost certainly need to use
+ * ALT_SMP( W(instr) ... )
+ */
+#define ALT_UP(instr...)					\
+	.pushsection ".alt.smp.init", "a"			;\
+	.long	9998b						;\
+9997:	instr							;\
+	.if . - 9997b == 2					;\
+		nop						;\
+	.endif							;\
+	.if . - 9997b != 4					;\
+		.error "ALT_UP() content must assemble to exactly 4 bytes";\
+	.endif							;\
+	.popsection
+#define ALT_UP_B(label)					\
+	.equ	up_b_offset, label - 9998b			;\
+	.pushsection ".alt.smp.init", "a"			;\
+	.long	9998b						;\
+	W(b)	. + up_b_offset					;\
+	.popsection
+#else
+#define ALT_SMP(instr...)
+#define ALT_UP(instr...) instr
+#define ALT_UP_B(label) b label
+#endif
+
+/*
+ * Instruction barrier
+ */
+	.macro	instr_sync
+#if __LINUX_ARM_ARCH__ >= 7
+	isb
+#elif __LINUX_ARM_ARCH__ == 6
+	mcr	p15, 0, r0, c7, c5, 4
+#endif
+	.endm
+
+/*
+ * SMP data memory barrier
+ */
+	.macro	smp_dmb mode
+#ifdef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7
+	.ifeqs "\mode","arm"
+	ALT_SMP(dmb	ish)
+	.else
+	ALT_SMP(W(dmb)	ish)
+	.endif
+#elif __LINUX_ARM_ARCH__ == 6
+	ALT_SMP(mcr	p15, 0, r0, c7, c10, 5)	@ dmb
+#else
+#error Incompatible SMP platform
+#endif
+	.ifeqs "\mode","arm"
+	ALT_UP(nop)
+	.else
+	ALT_UP(W(nop))
+	.endif
+#endif
+	.endm
+
+#if defined(CONFIG_CPU_V7M)
+	/*
+	 * setmode is used to assert to be in svc mode during boot. For v7-M
+	 * this is done in __v7m_setup, so setmode can be empty here.
+	 */
+	.macro	setmode, mode, reg
+	.endm
+#elif defined(CONFIG_THUMB2_KERNEL)
+	.macro	setmode, mode, reg
+	mov	\reg, #\mode
+	msr	cpsr_c, \reg
+	.endm
+#else
+	.macro	setmode, mode, reg
+	msr	cpsr_c, #\mode
+	.endm
+#endif
+
+/*
+ * Helper macro to enter SVC mode cleanly and mask interrupts. reg is
+ * a scratch register for the macro to overwrite.
+ *
+ * This macro is intended for forcing the CPU into SVC mode at boot time.
+ * you cannot return to the original mode.
+ */
+.macro safe_svcmode_maskall reg:req
+#if __LINUX_ARM_ARCH__ >= 6 && !defined(CONFIG_CPU_V7M)
+	mrs	\reg , cpsr
+	eor	\reg, \reg, #HYP_MODE
+	tst	\reg, #MODE_MASK
+	bic	\reg , \reg , #MODE_MASK
+	orr	\reg , \reg , #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
+	bne	1f
+	orr	\reg, \reg, #PSR_A_BIT
+	badr	lr, 2f
+	msr	spsr_cxsf, \reg
+	__MSR_ELR_HYP(14)
+	__ERET
+1:	msr	cpsr_c, \reg
+2:
+#else
+/*
+ * workaround for possibly broken pre-v6 hardware
+ * (akita, Sharp Zaurus C-1000, PXA270-based)
+ */
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, \reg
+#endif
+.endm
+
+/*
+ * STRT/LDRT access macros with ARM and Thumb-2 variants
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+
+	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER()
+9999:
+	.if	\inc == 1
+	\instr\()b\t\cond\().w \reg, [\ptr, #\off]
+	.elseif	\inc == 4
+	\instr\t\cond\().w \reg, [\ptr, #\off]
+	.else
+	.error	"Unsupported inc macro argument"
+	.endif
+
+	.pushsection __ex_table,"a"
+	.align	3
+	.long	9999b, \abort
+	.popsection
+	.endm
+
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
+	@ explicit IT instruction needed because of the label
+	@ introduced by the USER macro
+	.ifnc	\cond,al
+	.if	\rept == 1
+	itt	\cond
+	.elseif	\rept == 2
+	ittt	\cond
+	.else
+	.error	"Unsupported rept macro argument"
+	.endif
+	.endif
+
+	@ Slightly optimised to avoid incrementing the pointer twice
+	usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
+	.if	\rept == 2
+	usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
+	.endif
+
+	add\cond \ptr, #\rept * \inc
+	.endm
+
+#else	/* !CONFIG_THUMB2_KERNEL */
+
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort, t=TUSER()
+	.rept	\rept
+9999:
+	.if	\inc == 1
+	\instr\()b\t\cond \reg, [\ptr], #\inc
+	.elseif	\inc == 4
+	\instr\t\cond \reg, [\ptr], #\inc
+	.else
+	.error	"Unsupported inc macro argument"
+	.endif
+
+	.pushsection __ex_table,"a"
+	.align	3
+	.long	9999b, \abort
+	.popsection
+	.endr
+	.endm
+
+#endif	/* CONFIG_THUMB2_KERNEL */
+
+	.macro	strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+	usracc	str, \reg, \ptr, \inc, \cond, \rept, \abort
+	.endm
+
+	.macro	ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+	usracc	ldr, \reg, \ptr, \inc, \cond, \rept, \abort
+	.endm
+
+/* Utility macro for declaring string literals */
+	.macro	string name:req, string
+	.type \name , #object
+\name:
+	.asciz "\string"
+	.size \name , . - \name
+	.endm
+
+	.irp	c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
+	.macro	ret\c, reg
+#if __LINUX_ARM_ARCH__ < 6
+	mov\c	pc, \reg
+#else
+	.ifeqs	"\reg", "lr"
+	bx\c	\reg
+	.else
+	mov\c	pc, \reg
+	.endif
+#endif
+	.endm
+	.endr
+
+	.macro	ret.w, reg
+	ret	\reg
+#ifdef CONFIG_THUMB2_KERNEL
+	nop
+#endif
+	.endm
+
+	.macro	bug, msg, line
+#ifdef CONFIG_THUMB2_KERNEL
+1:	.inst	0xde02
+#else
+1:	.inst	0xe7f001f2
+#endif
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+	.pushsection .rodata.str, "aMS", %progbits, 1
+2:	.asciz	"\msg"
+	.popsection
+	.pushsection __bug_table, "aw"
+	.align	2
+	.word	1b, 2b
+	.hword	\line
+	.popsection
+#endif
+	.endm
+
+#ifdef CONFIG_KPROBES
+#define _ASM_NOKPROBE(entry)				\
+	.pushsection "_kprobe_blacklist", "aw" ;	\
+	.balign 4 ;					\
+	.long entry;					\
+	.popsection
+#else
+#define _ASM_NOKPROBE(entry)
+#endif
+
+#endif /* __ASM_ASSEMBLER_H__ */