diff options
Diffstat (limited to 'arch/arm/mach-imx/Kconfig')
| -rw-r--r-- | arch/arm/mach-imx/Kconfig | 594 |
1 files changed, 594 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig new file mode 100644 index 000000000..abc337111 --- /dev/null +++ b/arch/arm/mach-imx/Kconfig @@ -0,0 +1,594 @@ +menuconfig ARCH_MXC + bool "Freescale i.MX family" + depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M + select ARCH_SUPPORTS_BIG_ENDIAN + select CLKSRC_IMX_GPT + select GENERIC_IRQ_CHIP + select GPIOLIB + select PINCTRL + select PM_OPP if PM + select SOC_BUS + select SRAM + help + Support for Freescale MXC/iMX-based family of processors + +if ARCH_MXC + +config MXC_TZIC + bool + +config MXC_AVIC + bool + +config MXC_DEBUG_BOARD + bool "Enable MXC debug board(for 3-stack)" + depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS + help + The debug board is an integral part of the MXC 3-stack(PDK) + platforms, it can be attached or removed from the peripheral + board. On debug board, several debug devices(ethernet, UART, + buttons, LEDs and JTAG) are implemented. Between the MCU and + these devices, a CPLD is added as a bridge which performs + data/address de-multiplexing and decode, signal level shift, + interrupt control and various board functions. + +config HAVE_IMX_ANATOP + bool + +config HAVE_IMX_GPC + bool + select PM_GENERIC_DOMAINS if PM + +config HAVE_IMX_MMDC + bool + +config HAVE_IMX_SRC + def_bool y if SMP + select ARCH_HAS_RESET_CONTROLLER + +config IMX_HAVE_IOMUX_V1 + bool + +config ARCH_MXC_IOMUX_V3 + bool + +config SOC_IMX21 + bool + select CPU_ARM926T + select IMX_HAVE_IOMUX_V1 + select MXC_AVIC + +config SOC_IMX27 + bool + select CPU_ARM926T + select IMX_HAVE_IOMUX_V1 + select MXC_AVIC + select PINCTRL_IMX27 + +config SOC_IMX31 + bool + select CPU_V6 + select MXC_AVIC + +config SOC_IMX35 + bool + select ARCH_MXC_IOMUX_V3 + select MXC_AVIC + select PINCTRL_IMX35 + +if ARCH_MULTI_V5 + +comment "MX21 platforms:" + +config MACH_MX21ADS + bool "MX21ADS platform" + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select SOC_IMX21 + help + Include support for MX21ADS platform. This includes specific + configurations for the board and its peripherals. + +comment "MX27 platforms:" + +config MACH_MX27ADS + bool "MX27ADS platform" + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 + select SOC_IMX27 + help + Include support for MX27ADS platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX27_3DS + bool "MX27PDK platform" + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MX2_CAMERA + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_DEBUG_BOARD + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX27 + help + Include support for MX27PDK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_IMX27_VISSTRIM_M10 + bool "Vista Silicon i.MX27 Visstrim_m10" + select IMX_HAVE_PLATFORM_GPIO_KEYS + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MX2_CAMERA + select IMX_HAVE_PLATFORM_MX2_EMMA + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select LEDS_GPIO_REGISTER + select SOC_IMX27 + help + Include support for Visstrim_m10 platform and its different variants. + This includes specific configurations for the board and its + peripherals. + +config MACH_PCA100 + bool "Phytec phyCARD-s (pca100)" + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 + select IMX_HAVE_PLATFORM_SPI_IMX + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX27 + help + Include support for phyCARD-s (aka pca100) platform. This + includes specific configurations for the module and its peripherals. + +config MACH_IMX27_DT + bool "Support i.MX27 platforms from device tree" + select SOC_IMX27 + help + Include support for Freescale i.MX27 based platforms + using the device tree for discovery + +endif + +if ARCH_MULTI_V6 + +comment "MX31 platforms:" + +config MACH_MX31ADS + bool "Support MX31ADS platforms" + default y + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX31 + help + Include support for MX31ADS platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX31ADS_WM1133_EV1 + bool "Support Wolfson Microelectronics 1133-EV1 module" + depends on MACH_MX31ADS + depends on MFD_WM8350_I2C + depends on REGULATOR_WM8350 = y + help + Include support for the Wolfson Microelectronics 1133-EV1 PMU + and audio module for the MX31ADS platform. + +config MACH_MX31LILLY + bool "Support MX31 LILLY-1131 platforms (INCO startec)" + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_SPI_IMX + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX31 + help + Include support for mx31 based LILLY1131 modules. This includes + specific configurations for the board and its peripherals. + +config MACH_MX31LITE + bool "Support MX31 LITEKIT (LogicPD)" + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_RTC + select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX31 + help + Include support for MX31 LITEKIT platform. This includes specific + configurations for the board and its peripherals. + +config MACH_PCM037 + bool "Support Phytec pcm037 (i.MX31) platforms" + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX31 + help + Include support for Phytec pcm037 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_PCM037_EET + bool "Support pcm037 EET board extensions" + depends on MACH_PCM037 + select IMX_HAVE_PLATFORM_GPIO_KEYS + select IMX_HAVE_PLATFORM_SPI_IMX + help + Add support for PCM037 EET baseboard extensions. If you are using the + OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel + command-line parameter. + +config MACH_MX31_3DS + bool "Support MX31PDK (3DS)" + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_DEBUG_BOARD + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX31 + help + Include support for MX31PDK (3DS) platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX31_3DS_MXC_NAND_USE_BBT + bool "Make the MXC NAND driver use the in flash Bad Block Table" + depends on MACH_MX31_3DS + depends on MTD_NAND_MXC + help + Enable this if you want that the MXC NAND driver uses the in flash + Bad Block Table to know what blocks are bad instead of scanning the + entire flash looking for bad block markers. + +config MACH_MX31MOBOARD + bool "Support mx31moboard platforms (EPFL Mobots group)" + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX31 + help + Include support for mx31moboard platform. This includes specific + configurations for the board and its peripherals. + +config MACH_QONG + bool "Support Dave/DENX QongEVB-LITE platform" + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX31 + help + Include support for Dave/DENX QongEVB-LITE platform. This includes + specific configurations for the board and its peripherals. + +config MACH_ARMADILLO5X0 + bool "Support Atmark Armadillo-500 Development Base Board" + select IMX_HAVE_PLATFORM_GPIO_KEYS + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX31 + help + Include support for Atmark Armadillo-500 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_KZM_ARM11_01 + bool "Support KZM-ARM11-01(Kyoto Microcomputer)" + select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX31 + help + Include support for KZM-ARM11-01. This includes specific + configurations for the board and its peripherals. + +config MACH_BUG + bool "Support Buglabs BUGBase platform" + default y + select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX31 + help + Include support for BUGBase 1.3 platform. This includes specific + configurations for the board and its peripherals. + +config MACH_IMX31_DT + bool "Support i.MX31 platforms from device tree" + select SOC_IMX31 + help + Include support for Freescale i.MX31 based platforms + using the device tree for discovery. + +comment "MX35 platforms:" + +config MACH_IMX35_DT + bool "Support i.MX35 platforms from device tree" + select SOC_IMX35 + help + Include support for Freescale i.MX35 based platforms + using the device tree for discovery. + +config MACH_PCM043 + bool "Support Phytec pcm043 (i.MX35) platforms" + select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX35 + help + Include support for Phytec pcm043 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_MX35_3DS + bool "Support MX35PDK platform" + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_RTC + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select MXC_DEBUG_BOARD + select SOC_IMX35 + help + Include support for MX35PDK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_VPR200 + bool "Support VPR200 platform" + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_GPIO_KEYS + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select SOC_IMX35 + help + Include support for VPR200 platform. This includes specific + configurations for the board and its peripherals. + +endif + +comment "Device tree only" + +if ARCH_MULTI_V4T + +config SOC_IMX1 + bool "i.MX1 support" + select CPU_ARM920T + select MXC_AVIC + select PINCTRL_IMX1 + help + This enables support for Freescale i.MX1 processor + +endif + +if ARCH_MULTI_V5 + +config SOC_IMX25 + bool "i.MX25 support" + select ARCH_MXC_IOMUX_V3 + select CPU_ARM926T + select MXC_AVIC + select PINCTRL_IMX25 + help + This enables support for Freescale i.MX25 processor +endif + +if ARCH_MULTI_V7 + +comment "Cortex-A platforms" + +config SOC_IMX5 + bool + select HAVE_IMX_SRC + select MXC_TZIC + +config SOC_IMX50 + bool "i.MX50 support" + select PINCTRL_IMX50 + select SOC_IMX5 + + help + This enables support for Freescale i.MX50 processor. + +config SOC_IMX51 + bool "i.MX51 support" + select PINCTRL_IMX51 + select SOC_IMX5 + help + This enables support for Freescale i.MX51 processor + +config SOC_IMX53 + bool "i.MX53 support" + select PINCTRL_IMX53 + select SOC_IMX5 + + help + This enables support for Freescale i.MX53 processor. + +config SOC_IMX6 + bool + select ARM_CPU_SUSPEND if (PM || CPU_IDLE) + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 + select ARM_GIC + select HAVE_IMX_ANATOP + select HAVE_IMX_GPC + select HAVE_IMX_MMDC + select HAVE_IMX_SRC + select MFD_SYSCON + select PL310_ERRATA_769419 if CACHE_L2X0 + +config SOC_IMX6Q + bool "i.MX6 Quad/DualLite support" + select ARM_ERRATA_764369 if SMP + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD + select PINCTRL_IMX6Q + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 Quad processor. + +config SOC_IMX6SL + bool "i.MX6 SoloLite support" + select PINCTRL_IMX6SL + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 SoloLite processor. + +config SOC_IMX6SLL + bool "i.MX6 SoloLiteLite support" + select PINCTRL_IMX6SLL + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 SoloLiteLite processor. + +config SOC_IMX6SX + bool "i.MX6 SoloX support" + select PINCTRL_IMX6SX + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 SoloX processor. + +config SOC_IMX6UL + bool "i.MX6 UltraLite support" + select PINCTRL_IMX6UL + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 UltraLite processor. + +config SOC_LS1021A + bool "Freescale LS1021A support" + select ARM_GIC + select HAVE_ARM_ARCH_TIMER + select ZONE_DMA if ARM_LPAE + help + This enables support for Freescale LS1021A processor. + +endif + +comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" + +if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M + +config SOC_IMX7D_CA7 + bool + select ARM_GIC + select HAVE_ARM_ARCH_TIMER + select HAVE_IMX_ANATOP + select HAVE_IMX_MMDC + select HAVE_IMX_SRC + select IMX_GPCV2 + +config SOC_IMX7D_CM4 + bool + select ARMV7M_SYSTICK + +config SOC_IMX7D + bool "i.MX7 Dual support" + select PINCTRL_IMX7D + select SOC_IMX7D_CA7 if ARCH_MULTI_V7 + select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M + help + This enables support for Freescale i.MX7 Dual processor. + +config SOC_VF610 + bool "Vybrid Family VF610 support" + select ARM_GIC if ARCH_MULTI_V7 + select PINCTRL_VF610 + + help + This enables support for Freescale Vybrid VF610 processor. + +choice + prompt "Clocksource for scheduler clock" + depends on SOC_VF610 + default VF_USE_ARM_GLOBAL_TIMER + + config VF_USE_ARM_GLOBAL_TIMER + bool "Use ARM Global Timer" + depends on ARCH_MULTI_V7 + select ARM_GLOBAL_TIMER + select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK + help + Use the ARM Global Timer as clocksource + + config VF_USE_PIT_TIMER + bool "Use PIT timer" + select VF_PIT_TIMER + help + Use SoC Periodic Interrupt Timer (PIT) as clocksource + +endchoice + +endif + +source "arch/arm/mach-imx/devices/Kconfig" + +endif |