diff options
Diffstat (limited to 'arch/arm/mach-imx/mach-imx27_visstrim_m10.c')
| -rw-r--r-- | arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 611 |
1 files changed, 611 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c new file mode 100644 index 000000000..5169dfba9 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -0,0 +1,611 @@ +/* + * mach-imx27_visstrim_m10.c + * + * Copyright 2010 Javier Martin <javier.martin@vista-silicon.com> + * + * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/platform_data/pca953x.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/leds.h> +#include <linux/platform_data/asoc-mx27vis.h> +#include <media/soc_camera.h> +#include <sound/tlv320aic32x4.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/system_info.h> +#include <asm/memblock.h> + +#include "common.h" +#include "devices-imx27.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx27.h" + +#define TVP5150_RSTN (GPIO_PORTC + 18) +#define TVP5150_PWDN (GPIO_PORTC + 19) +#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) +#define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25) + +#define VERSION_MASK 0x7 +#define MOTHERBOARD_SHIFT 4 +#define EXPBOARD_SHIFT 0 + +#define MOTHERBOARD_BIT2 (GPIO_PORTD + 31) +#define MOTHERBOARD_BIT1 (GPIO_PORTD + 30) +#define MOTHERBOARD_BIT0 (GPIO_PORTD + 29) + +#define EXPBOARD_BIT2 (GPIO_PORTD + 25) +#define EXPBOARD_BIT1 (GPIO_PORTD + 27) +#define EXPBOARD_BIT0 (GPIO_PORTD + 28) + +#define AMP_GAIN_0 (GPIO_PORTF + 9) +#define AMP_GAIN_1 (GPIO_PORTF + 8) +#define AMP_MUTE_SDL (GPIO_PORTE + 5) +#define AMP_MUTE_SDR (GPIO_PORTF + 7) + +static const int visstrim_m10_pins[] __initconst = { + /* UART1 (console) */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* SSI1 */ + PC20_PF_SSI1_FS, + PC21_PF_SSI1_RXD, + PC22_PF_SSI1_TXD, + PC23_PF_SSI1_CLK, + /* SDHC1 */ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + /* Both I2Cs */ + PD17_PF_I2C_DATA, + PD18_PF_I2C_CLK, + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* USB OTG */ + OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT, + PC9_PF_USBOTG_DATA0, + PC11_PF_USBOTG_DATA1, + PC10_PF_USBOTG_DATA2, + PC13_PF_USBOTG_DATA3, + PC12_PF_USBOTG_DATA4, + PC7_PF_USBOTG_DATA5, + PC8_PF_USBOTG_DATA6, + PE25_PF_USBOTG_DATA7, + PE24_PF_USBOTG_CLK, + PE2_PF_USBOTG_DIR, + PE0_PF_USBOTG_NXT, + PE1_PF_USBOTG_STP, + PB23_PF_USB_PWR, + PB24_PF_USB_OC, + /* CSI */ + TVP5150_RSTN | GPIO_GPIO | GPIO_OUT, + TVP5150_PWDN | GPIO_GPIO | GPIO_OUT, + PB10_PF_CSI_D0, + PB11_PF_CSI_D1, + PB12_PF_CSI_D2, + PB13_PF_CSI_D3, + PB14_PF_CSI_D4, + PB15_PF_CSI_MCLK, + PB16_PF_CSI_PIXCLK, + PB17_PF_CSI_D5, + PB18_PF_CSI_D6, + PB19_PF_CSI_D7, + PB20_PF_CSI_VSYNC, + PB21_PF_CSI_HSYNC, + /* mother board version */ + MOTHERBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + MOTHERBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + MOTHERBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + /* expansion board version */ + EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + /* Audio AMP control */ + AMP_GAIN_0 | GPIO_GPIO | GPIO_OUT, + AMP_GAIN_1 | GPIO_GPIO | GPIO_OUT, + AMP_MUTE_SDL | GPIO_GPIO | GPIO_OUT, + AMP_MUTE_SDR | GPIO_GPIO | GPIO_OUT, +}; + +static struct gpio visstrim_m10_version_gpios[] = { + { EXPBOARD_BIT0, GPIOF_IN, "exp-version-0" }, + { EXPBOARD_BIT1, GPIOF_IN, "exp-version-1" }, + { EXPBOARD_BIT2, GPIOF_IN, "exp-version-2" }, + { MOTHERBOARD_BIT0, GPIOF_IN, "mother-version-0" }, + { MOTHERBOARD_BIT1, GPIOF_IN, "mother-version-1" }, + { MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" }, +}; + +static const struct gpio visstrim_m10_gpios[] __initconst = { + { + .gpio = TVP5150_RSTN, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH, + .label = "tvp5150_rstn", + }, + { + .gpio = TVP5150_PWDN, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, + .label = "tvp5150_pwdn", + }, + { + .gpio = OTG_PHY_CS_GPIO, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, + .label = "usbotg_cs", + }, + { + .gpio = AMP_GAIN_0, + .flags = GPIOF_DIR_OUT, + .label = "amp-gain-0", + }, + { + .gpio = AMP_GAIN_1, + .flags = GPIOF_DIR_OUT, + .label = "amp-gain-1", + }, + { + .gpio = AMP_MUTE_SDL, + .flags = GPIOF_DIR_OUT, + .label = "amp-mute-sdl", + }, + { + .gpio = AMP_MUTE_SDR, + .flags = GPIOF_DIR_OUT, + .label = "amp-mute-sdr", + }, +}; + +/* Camera */ +static int visstrim_camera_power(struct device *dev, int on) +{ + gpio_set_value(TVP5150_PWDN, on); + + return 0; +}; + +static int visstrim_camera_reset(struct device *dev) +{ + gpio_set_value(TVP5150_RSTN, 0); + ndelay(500); + gpio_set_value(TVP5150_RSTN, 1); + + return 0; +}; + +static struct i2c_board_info visstrim_i2c_camera = { + I2C_BOARD_INFO("tvp5150", 0x5d), +}; + +static struct soc_camera_link iclink_tvp5150 = { + .bus_id = 0, + .board_info = &visstrim_i2c_camera, + .i2c_adapter_id = 0, + .power = visstrim_camera_power, + .reset = visstrim_camera_reset, +}; + +static struct mx2_camera_platform_data visstrim_camera = { + .flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE | + MX2_CAMERA_PCLK_SAMPLE_RISING, + .clk = 100000, +}; + +static phys_addr_t mx2_camera_base __initdata; +#define MX2_CAMERA_BUF_SIZE SZ_8M + +static void __init visstrim_analog_camera_init(void) +{ + struct platform_device *pdev; + + gpio_set_value(TVP5150_PWDN, 1); + ndelay(1); + gpio_set_value(TVP5150_RSTN, 0); + ndelay(500); + gpio_set_value(TVP5150_RSTN, 1); + ndelay(200000); + + pdev = imx27_add_mx2_camera(&visstrim_camera); + if (IS_ERR(pdev)) + return; + + dma_declare_coherent_memory(&pdev->dev, mx2_camera_base, + mx2_camera_base, MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_EXCLUSIVE); +} + +static void __init visstrim_reserve(void) +{ + /* reserve 4 MiB for mx2-camera */ + mx2_camera_base = arm_memblock_steal(3 * MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE); +} + +/* GPIOs used as events for applications */ +static struct gpio_keys_button visstrim_gpio_keys[] = { + { + .type = EV_KEY, + .code = KEY_RESTART, + .gpio = (GPIO_PORTC + 15), + .desc = "Default config", + .active_low = 0, + .wakeup = 1, + }, + { + .type = EV_KEY, + .code = KEY_RECORD, + .gpio = (GPIO_PORTF + 14), + .desc = "Record", + .active_low = 0, + .wakeup = 1, + }, + { + .type = EV_KEY, + .code = KEY_STOP, + .gpio = (GPIO_PORTF + 13), + .desc = "Stop", + .active_low = 0, + .wakeup = 1, + } +}; + +static const struct gpio_keys_platform_data + visstrim_gpio_keys_platform_data __initconst = { + .buttons = visstrim_gpio_keys, + .nbuttons = ARRAY_SIZE(visstrim_gpio_keys), +}; + +/* led */ +static const struct gpio_led visstrim_m10_leds[] __initconst = { + { + .name = "visstrim:ld0", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 29), + }, + { + .name = "visstrim:ld1", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 24), + }, + { + .name = "visstrim:ld2", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 28), + }, + { + .name = "visstrim:ld3", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 25), + }, +}; + +static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = { + .leds = visstrim_m10_leds, + .num_leds = ARRAY_SIZE(visstrim_m10_leds), +}; + +/* Visstrim_SM10 has a microSD slot connected to sdhc1 */ +static int visstrim_m10_sdhc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + + ret = request_irq(gpio_to_irq(SDHC1_IRQ_GPIO), detect_irq, + IRQF_TRIGGER_FALLING, "mmc-detect", data); + return ret; +} + +static void visstrim_m10_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC1_IRQ_GPIO), data); +} + +static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = { + .init = visstrim_m10_sdhc1_init, + .exit = visstrim_m10_sdhc1_exit, +}; + +/* Visstrim_SM10 NOR flash */ +static struct physmap_flash_data visstrim_m10_flash_data = { + .width = 2, +}; + +static struct resource visstrim_m10_flash_resource = { + .start = 0xc0000000, + .end = 0xc0000000 + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device visstrim_m10_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &visstrim_m10_flash_data, + }, + .num_resources = 1, + .resource = &visstrim_m10_flash_resource, +}; + +static struct platform_device *platform_devices[] __initdata = { + &visstrim_m10_nor_mtd_device, +}; + +/* Visstrim_M10 uses UART0 as console */ +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* I2C */ +static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = { + .bitrate = 100000, +}; + +static struct pca953x_platform_data visstrim_m10_pca9555_pdata = { + .gpio_base = 240, /* After MX27 internal GPIOs */ + .invert = 0, +}; + +static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = { + .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN | + AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE | + AIC32X4_PWR_AIC32X4_LDO_ENABLE | + AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 | + AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED, + .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K | + AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K, + .swapdacs = false, +}; + +static struct i2c_board_info visstrim_m10_i2c_devices[] = { + { + I2C_BOARD_INFO("pca9555", 0x20), + .platform_data = &visstrim_m10_pca9555_pdata, + }, + { + I2C_BOARD_INFO("tlv320aic32x4", 0x18), + .platform_data = &visstrim_m10_aic32x4_pdata, + }, + { + I2C_BOARD_INFO("m41t00", 0x68), + } +}; + +/* USB OTG */ +static int otg_phy_init(struct platform_device *pdev) +{ + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} + +static const struct mxc_usbh_platform_data +visstrim_m10_usbotg_pdata __initconst = { + .init = otg_phy_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, +}; + +/* SSI */ +static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = { + .flags = IMX_SSI_DMA | IMX_SSI_SYN, +}; + +/* coda */ + +static void __init visstrim_coda_init(void) +{ + struct platform_device *pdev; + + pdev = imx27_add_coda(); + dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base + MX2_CAMERA_BUF_SIZE, + mx2_camera_base + MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_EXCLUSIVE); +} + +/* DMA deinterlace */ +static struct platform_device visstrim_deinterlace = { + .name = "m2m-deinterlace", + .id = 0, +}; + +static void __init visstrim_deinterlace_init(void) +{ + int ret = -ENOMEM; + struct platform_device *pdev = &visstrim_deinterlace; + + ret = platform_device_register(pdev); + + dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE, + mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_EXCLUSIVE); +} + +/* Emma-PrP for format conversion */ +static void __init visstrim_emmaprp_init(void) +{ + struct platform_device *pdev; + int ret; + + pdev = imx27_add_mx2_emmaprp(); + if (IS_ERR(pdev)) + return; + + /* + * Use the same memory area as the analog camera since both + * devices are, by nature, exclusive. + */ + ret = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base, mx2_camera_base, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_EXCLUSIVE); + if (ret) + pr_err("Failed to declare memory for emmaprp\n"); +} + +/* Audio */ +static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = { + .amp_gain0_gpio = AMP_GAIN_0, + .amp_gain1_gpio = AMP_GAIN_1, + .amp_mutel_gpio = AMP_MUTE_SDL, + .amp_muter_gpio = AMP_MUTE_SDR, +}; + +static void __init visstrim_m10_revision(void) +{ + int exp_version = 0; + int mo_version = 0; + int ret; + + ret = gpio_request_array(visstrim_m10_version_gpios, + ARRAY_SIZE(visstrim_m10_version_gpios)); + if (ret) { + pr_err("Failed to request version gpios"); + return; + } + + /* Get expansion board version (negative logic) */ + exp_version |= !gpio_get_value(EXPBOARD_BIT2) << 2; + exp_version |= !gpio_get_value(EXPBOARD_BIT1) << 1; + exp_version |= !gpio_get_value(EXPBOARD_BIT0); + + /* Get mother board version (negative logic) */ + mo_version |= !gpio_get_value(MOTHERBOARD_BIT2) << 2; + mo_version |= !gpio_get_value(MOTHERBOARD_BIT1) << 1; + mo_version |= !gpio_get_value(MOTHERBOARD_BIT0); + + system_rev = 0x27000; + system_rev |= (mo_version << MOTHERBOARD_SHIFT); + system_rev |= (exp_version << EXPBOARD_SHIFT); +} + +static void __init visstrim_m10_board_init(void) +{ + int ret; + + imx27_soc_init(); + visstrim_m10_revision(); + + ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins, + ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10"); + if (ret) + pr_err("Failed to setup pins (%d)\n", ret); + + imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); + imx27_add_imx_uart0(&uart_pdata); + + imx27_add_imx_i2c(0, &visstrim_m10_i2c_data); + imx27_add_imx_i2c(1, &visstrim_m10_i2c_data); + i2c_register_board_info(0, visstrim_m10_i2c_devices, + ARRAY_SIZE(visstrim_m10_i2c_devices)); + + imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata); + imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata); + imx27_add_fec(NULL); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init visstrim_m10_late_init(void) +{ + int mo_version, ret; + + ret = gpio_request_array(visstrim_m10_gpios, + ARRAY_SIZE(visstrim_m10_gpios)); + if (ret) + pr_err("Failed to request gpios (%d)\n", ret); + + imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); + + imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata, + sizeof(snd_mx27vis_pdata)); + platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, + &iclink_tvp5150, sizeof(iclink_tvp5150)); + + gpio_led_register_device(0, &visstrim_m10_led_data); + + /* Use mother board version to decide what video devices we shall use */ + mo_version = (system_rev >> MOTHERBOARD_SHIFT) & VERSION_MASK; + if (mo_version & 0x1) { + visstrim_emmaprp_init(); + + /* + * Despite not being used, tvp5150 must be + * powered on to avoid I2C problems. To minimize + * power consupmtion keep reset enabled. + */ + gpio_set_value(TVP5150_PWDN, 1); + ndelay(1); + gpio_set_value(TVP5150_RSTN, 0); + } else { + visstrim_deinterlace_init(); + visstrim_analog_camera_init(); + } + + visstrim_coda_init(); +} + +static void __init visstrim_m10_timer_init(void) +{ + mx27_clocks_init((unsigned long)25000000); +} + +MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") + .atag_offset = 0x100, + .reserve = visstrim_reserve, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .init_time = visstrim_m10_timer_init, + .init_machine = visstrim_m10_board_init, + .init_late = visstrim_m10_late_init, + .restart = mxc_restart, +MACHINE_END |