diff options
Diffstat (limited to 'arch/arm/mach-imx')
143 files changed, 24286 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c new file mode 100644 index 000000000..0015abe9c --- /dev/null +++ b/arch/arm/mach-imx/3ds_debugboard.c @@ -0,0 +1,213 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/smsc911x.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include "3ds_debugboard.h" +#include "hardware.h" + +/* LAN9217 ethernet base address */ +#define LAN9217_BASE_ADDR(n) (n + 0x0) +/* External UART */ +#define UARTA_BASE_ADDR(n) (n + 0x8000) +#define UARTB_BASE_ADDR(n) (n + 0x10000) + +#define BOARD_IO_ADDR(n) (n + 0x20000) +/* LED switchs */ +#define LED_SWITCH_REG 0x00 +/* buttons */ +#define SWITCH_BUTTONS_REG 0x08 +/* status, interrupt */ +#define INTR_STATUS_REG 0x10 +#define INTR_MASK_REG 0x38 +#define INTR_RESET_REG 0x20 +/* magic word for debug CPLD */ +#define MAGIC_NUMBER1_REG 0x40 +#define MAGIC_NUMBER2_REG 0x48 +/* CPLD code version */ +#define CPLD_CODE_VER_REG 0x50 +/* magic word for debug CPLD */ +#define MAGIC_NUMBER3_REG 0x58 +/* module reset register*/ +#define MODULE_RESET_REG 0x60 +/* CPU ID and Personality ID */ +#define MCU_BOARD_ID_REG 0x68 + +#define MXC_MAX_EXP_IO_LINES 16 + +/* interrupts like external uart , external ethernet etc*/ +#define EXPIO_INT_ENET 0 +#define EXPIO_INT_XUART_A 1 +#define EXPIO_INT_XUART_B 2 +#define EXPIO_INT_BUTTON_A 3 +#define EXPIO_INT_BUTTON_B 4 + +static void __iomem *brd_io; +static struct irq_domain *domain; + +static struct resource smsc911x_resources[] = { + { + .flags = IORESOURCE_MEM, + } , { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY, +}; + +static struct platform_device smsc_lan9217_device = { + .name = "smsc911x", + .id = -1, + .dev = { + .platform_data = &smsc911x_config, + }, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, +}; + +static void mxc_expio_irq_handler(struct irq_desc *desc) +{ + u32 imr_val; + u32 int_valid; + u32 expio_irq; + + /* irq = gpio irq number */ + desc->irq_data.chip->irq_mask(&desc->irq_data); + + imr_val = imx_readw(brd_io + INTR_MASK_REG); + int_valid = imx_readw(brd_io + INTR_STATUS_REG) & ~imr_val; + + expio_irq = 0; + for (; int_valid != 0; int_valid >>= 1, expio_irq++) { + if ((int_valid & 1) == 0) + continue; + generic_handle_irq(irq_find_mapping(domain, expio_irq)); + } + + desc->irq_data.chip->irq_ack(&desc->irq_data); + desc->irq_data.chip->irq_unmask(&desc->irq_data); +} + +/* + * Disable an expio pin's interrupt by setting the bit in the imr. + * Irq is an expio virtual irq number + */ +static void expio_mask_irq(struct irq_data *d) +{ + u16 reg; + u32 expio = d->hwirq; + + reg = imx_readw(brd_io + INTR_MASK_REG); + reg |= (1 << expio); + imx_writew(reg, brd_io + INTR_MASK_REG); +} + +static void expio_ack_irq(struct irq_data *d) +{ + u32 expio = d->hwirq; + + imx_writew(1 << expio, brd_io + INTR_RESET_REG); + imx_writew(0, brd_io + INTR_RESET_REG); + expio_mask_irq(d); +} + +static void expio_unmask_irq(struct irq_data *d) +{ + u16 reg; + u32 expio = d->hwirq; + + reg = imx_readw(brd_io + INTR_MASK_REG); + reg &= ~(1 << expio); + imx_writew(reg, brd_io + INTR_MASK_REG); +} + +static struct irq_chip expio_irq_chip = { + .irq_ack = expio_ack_irq, + .irq_mask = expio_mask_irq, + .irq_unmask = expio_unmask_irq, +}; + +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + +int __init mxc_expio_init(u32 base, u32 intr_gpio) +{ + u32 p_irq = gpio_to_irq(intr_gpio); + int irq_base; + int i; + + brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K); + if (brd_io == NULL) + return -ENOMEM; + + if ((imx_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) || + (imx_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) || + (imx_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) { + pr_info("3-Stack Debug board not detected\n"); + iounmap(brd_io); + brd_io = NULL; + return -ENODEV; + } + + pr_info("3-Stack Debug board detected, rev = 0x%04X\n", + readw(brd_io + CPLD_CODE_VER_REG)); + + /* + * Configure INT line as GPIO input + */ + gpio_request(intr_gpio, "expio_pirq"); + gpio_direction_input(intr_gpio); + + /* disable the interrupt and clear the status */ + imx_writew(0, brd_io + INTR_MASK_REG); + imx_writew(0xFFFF, brd_io + INTR_RESET_REG); + imx_writew(0, brd_io + INTR_RESET_REG); + imx_writew(0x1F, brd_io + INTR_MASK_REG); + + irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); + WARN_ON(irq_base < 0); + + domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) { + irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); + irq_clear_status_flags(i, IRQ_NOREQUEST); + } + irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW); + irq_set_chained_handler(p_irq, mxc_expio_irq_handler); + + /* Register Lan device on the debugboard */ + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + + smsc911x_resources[0].start = LAN9217_BASE_ADDR(base); + smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1; + smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET); + smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET); + platform_device_register(&smsc_lan9217_device); + + return 0; +} diff --git a/arch/arm/mach-imx/3ds_debugboard.h b/arch/arm/mach-imx/3ds_debugboard.h new file mode 100644 index 000000000..9fd6cb3f8 --- /dev/null +++ b/arch/arm/mach-imx/3ds_debugboard.h @@ -0,0 +1,18 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __ASM_ARCH_MXC_3DS_DB_H__ +#define __ASM_ARCH_MXC_3DS_DB_H__ + +extern int __init mxc_expio_init(u32 base, u32 intr_gpio); + +#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */ diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig new file mode 100644 index 000000000..abc337111 --- /dev/null +++ b/arch/arm/mach-imx/Kconfig @@ -0,0 +1,594 @@ +menuconfig ARCH_MXC + bool "Freescale i.MX family" + depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M + select ARCH_SUPPORTS_BIG_ENDIAN + select CLKSRC_IMX_GPT + select GENERIC_IRQ_CHIP + select GPIOLIB + select PINCTRL + select PM_OPP if PM + select SOC_BUS + select SRAM + help + Support for Freescale MXC/iMX-based family of processors + +if ARCH_MXC + +config MXC_TZIC + bool + +config MXC_AVIC + bool + +config MXC_DEBUG_BOARD + bool "Enable MXC debug board(for 3-stack)" + depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS + help + The debug board is an integral part of the MXC 3-stack(PDK) + platforms, it can be attached or removed from the peripheral + board. On debug board, several debug devices(ethernet, UART, + buttons, LEDs and JTAG) are implemented. Between the MCU and + these devices, a CPLD is added as a bridge which performs + data/address de-multiplexing and decode, signal level shift, + interrupt control and various board functions. + +config HAVE_IMX_ANATOP + bool + +config HAVE_IMX_GPC + bool + select PM_GENERIC_DOMAINS if PM + +config HAVE_IMX_MMDC + bool + +config HAVE_IMX_SRC + def_bool y if SMP + select ARCH_HAS_RESET_CONTROLLER + +config IMX_HAVE_IOMUX_V1 + bool + +config ARCH_MXC_IOMUX_V3 + bool + +config SOC_IMX21 + bool + select CPU_ARM926T + select IMX_HAVE_IOMUX_V1 + select MXC_AVIC + +config SOC_IMX27 + bool + select CPU_ARM926T + select IMX_HAVE_IOMUX_V1 + select MXC_AVIC + select PINCTRL_IMX27 + +config SOC_IMX31 + bool + select CPU_V6 + select MXC_AVIC + +config SOC_IMX35 + bool + select ARCH_MXC_IOMUX_V3 + select MXC_AVIC + select PINCTRL_IMX35 + +if ARCH_MULTI_V5 + +comment "MX21 platforms:" + +config MACH_MX21ADS + bool "MX21ADS platform" + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select SOC_IMX21 + help + Include support for MX21ADS platform. This includes specific + configurations for the board and its peripherals. + +comment "MX27 platforms:" + +config MACH_MX27ADS + bool "MX27ADS platform" + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 + select SOC_IMX27 + help + Include support for MX27ADS platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX27_3DS + bool "MX27PDK platform" + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MX2_CAMERA + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_DEBUG_BOARD + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX27 + help + Include support for MX27PDK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_IMX27_VISSTRIM_M10 + bool "Vista Silicon i.MX27 Visstrim_m10" + select IMX_HAVE_PLATFORM_GPIO_KEYS + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MX2_CAMERA + select IMX_HAVE_PLATFORM_MX2_EMMA + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select LEDS_GPIO_REGISTER + select SOC_IMX27 + help + Include support for Visstrim_m10 platform and its different variants. + This includes specific configurations for the board and its + peripherals. + +config MACH_PCA100 + bool "Phytec phyCARD-s (pca100)" + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 + select IMX_HAVE_PLATFORM_SPI_IMX + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX27 + help + Include support for phyCARD-s (aka pca100) platform. This + includes specific configurations for the module and its peripherals. + +config MACH_IMX27_DT + bool "Support i.MX27 platforms from device tree" + select SOC_IMX27 + help + Include support for Freescale i.MX27 based platforms + using the device tree for discovery + +endif + +if ARCH_MULTI_V6 + +comment "MX31 platforms:" + +config MACH_MX31ADS + bool "Support MX31ADS platforms" + default y + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX31 + help + Include support for MX31ADS platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX31ADS_WM1133_EV1 + bool "Support Wolfson Microelectronics 1133-EV1 module" + depends on MACH_MX31ADS + depends on MFD_WM8350_I2C + depends on REGULATOR_WM8350 = y + help + Include support for the Wolfson Microelectronics 1133-EV1 PMU + and audio module for the MX31ADS platform. + +config MACH_MX31LILLY + bool "Support MX31 LILLY-1131 platforms (INCO startec)" + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_SPI_IMX + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX31 + help + Include support for mx31 based LILLY1131 modules. This includes + specific configurations for the board and its peripherals. + +config MACH_MX31LITE + bool "Support MX31 LITEKIT (LogicPD)" + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_RTC + select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX31 + help + Include support for MX31 LITEKIT platform. This includes specific + configurations for the board and its peripherals. + +config MACH_PCM037 + bool "Support Phytec pcm037 (i.MX31) platforms" + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX31 + help + Include support for Phytec pcm037 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_PCM037_EET + bool "Support pcm037 EET board extensions" + depends on MACH_PCM037 + select IMX_HAVE_PLATFORM_GPIO_KEYS + select IMX_HAVE_PLATFORM_SPI_IMX + help + Add support for PCM037 EET baseboard extensions. If you are using the + OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel + command-line parameter. + +config MACH_MX31_3DS + bool "Support MX31PDK (3DS)" + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_DEBUG_BOARD + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX31 + help + Include support for MX31PDK (3DS) platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX31_3DS_MXC_NAND_USE_BBT + bool "Make the MXC NAND driver use the in flash Bad Block Table" + depends on MACH_MX31_3DS + depends on MTD_NAND_MXC + help + Enable this if you want that the MXC NAND driver uses the in flash + Bad Block Table to know what blocks are bad instead of scanning the + entire flash looking for bad block markers. + +config MACH_MX31MOBOARD + bool "Support mx31moboard platforms (EPFL Mobots group)" + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX31 + help + Include support for mx31moboard platform. This includes specific + configurations for the board and its peripherals. + +config MACH_QONG + bool "Support Dave/DENX QongEVB-LITE platform" + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX31 + help + Include support for Dave/DENX QongEVB-LITE platform. This includes + specific configurations for the board and its peripherals. + +config MACH_ARMADILLO5X0 + bool "Support Atmark Armadillo-500 Development Base Board" + select IMX_HAVE_PLATFORM_GPIO_KEYS + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX31 + help + Include support for Atmark Armadillo-500 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_KZM_ARM11_01 + bool "Support KZM-ARM11-01(Kyoto Microcomputer)" + select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX31 + help + Include support for KZM-ARM11-01. This includes specific + configurations for the board and its peripherals. + +config MACH_BUG + bool "Support Buglabs BUGBase platform" + default y + select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX31 + help + Include support for BUGBase 1.3 platform. This includes specific + configurations for the board and its peripherals. + +config MACH_IMX31_DT + bool "Support i.MX31 platforms from device tree" + select SOC_IMX31 + help + Include support for Freescale i.MX31 based platforms + using the device tree for discovery. + +comment "MX35 platforms:" + +config MACH_IMX35_DT + bool "Support i.MX35 platforms from device tree" + select SOC_IMX35 + help + Include support for Freescale i.MX35 based platforms + using the device tree for discovery. + +config MACH_PCM043 + bool "Support Phytec pcm043 (i.MX35) platforms" + select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select USB_ULPI_VIEWPORT if USB_ULPI + select SOC_IMX35 + help + Include support for Phytec pcm043 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_MX35_3DS + bool "Support MX35PDK platform" + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_RTC + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select MXC_DEBUG_BOARD + select SOC_IMX35 + help + Include support for MX35PDK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_VPR200 + bool "Support VPR200 platform" + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_GPIO_KEYS + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select SOC_IMX35 + help + Include support for VPR200 platform. This includes specific + configurations for the board and its peripherals. + +endif + +comment "Device tree only" + +if ARCH_MULTI_V4T + +config SOC_IMX1 + bool "i.MX1 support" + select CPU_ARM920T + select MXC_AVIC + select PINCTRL_IMX1 + help + This enables support for Freescale i.MX1 processor + +endif + +if ARCH_MULTI_V5 + +config SOC_IMX25 + bool "i.MX25 support" + select ARCH_MXC_IOMUX_V3 + select CPU_ARM926T + select MXC_AVIC + select PINCTRL_IMX25 + help + This enables support for Freescale i.MX25 processor +endif + +if ARCH_MULTI_V7 + +comment "Cortex-A platforms" + +config SOC_IMX5 + bool + select HAVE_IMX_SRC + select MXC_TZIC + +config SOC_IMX50 + bool "i.MX50 support" + select PINCTRL_IMX50 + select SOC_IMX5 + + help + This enables support for Freescale i.MX50 processor. + +config SOC_IMX51 + bool "i.MX51 support" + select PINCTRL_IMX51 + select SOC_IMX5 + help + This enables support for Freescale i.MX51 processor + +config SOC_IMX53 + bool "i.MX53 support" + select PINCTRL_IMX53 + select SOC_IMX5 + + help + This enables support for Freescale i.MX53 processor. + +config SOC_IMX6 + bool + select ARM_CPU_SUSPEND if (PM || CPU_IDLE) + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 + select ARM_GIC + select HAVE_IMX_ANATOP + select HAVE_IMX_GPC + select HAVE_IMX_MMDC + select HAVE_IMX_SRC + select MFD_SYSCON + select PL310_ERRATA_769419 if CACHE_L2X0 + +config SOC_IMX6Q + bool "i.MX6 Quad/DualLite support" + select ARM_ERRATA_764369 if SMP + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD + select PINCTRL_IMX6Q + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 Quad processor. + +config SOC_IMX6SL + bool "i.MX6 SoloLite support" + select PINCTRL_IMX6SL + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 SoloLite processor. + +config SOC_IMX6SLL + bool "i.MX6 SoloLiteLite support" + select PINCTRL_IMX6SLL + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 SoloLiteLite processor. + +config SOC_IMX6SX + bool "i.MX6 SoloX support" + select PINCTRL_IMX6SX + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 SoloX processor. + +config SOC_IMX6UL + bool "i.MX6 UltraLite support" + select PINCTRL_IMX6UL + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 UltraLite processor. + +config SOC_LS1021A + bool "Freescale LS1021A support" + select ARM_GIC + select HAVE_ARM_ARCH_TIMER + select ZONE_DMA if ARM_LPAE + help + This enables support for Freescale LS1021A processor. + +endif + +comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" + +if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M + +config SOC_IMX7D_CA7 + bool + select ARM_GIC + select HAVE_ARM_ARCH_TIMER + select HAVE_IMX_ANATOP + select HAVE_IMX_MMDC + select HAVE_IMX_SRC + select IMX_GPCV2 + +config SOC_IMX7D_CM4 + bool + select ARMV7M_SYSTICK + +config SOC_IMX7D + bool "i.MX7 Dual support" + select PINCTRL_IMX7D + select SOC_IMX7D_CA7 if ARCH_MULTI_V7 + select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M + help + This enables support for Freescale i.MX7 Dual processor. + +config SOC_VF610 + bool "Vybrid Family VF610 support" + select ARM_GIC if ARCH_MULTI_V7 + select PINCTRL_VF610 + + help + This enables support for Freescale Vybrid VF610 processor. + +choice + prompt "Clocksource for scheduler clock" + depends on SOC_VF610 + default VF_USE_ARM_GLOBAL_TIMER + + config VF_USE_ARM_GLOBAL_TIMER + bool "Use ARM Global Timer" + depends on ARCH_MULTI_V7 + select ARM_GLOBAL_TIMER + select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK + help + Use the ARM Global Timer as clocksource + + config VF_USE_PIT_TIMER + bool "Use PIT timer" + select VF_PIT_TIMER + help + Use SoC Periodic Interrupt Timer (PIT) as clocksource + +endchoice + +endif + +source "arch/arm/mach-imx/devices/Kconfig" + +endif diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile new file mode 100644 index 000000000..02bf3eab4 --- /dev/null +++ b/arch/arm/mach-imx/Makefile @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-y := cpu.o system.o irq-common.o + +obj-$(CONFIG_SOC_IMX21) += mm-imx21.o + +obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o + +obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o +obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o + +obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o +obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o + +imx5-pm-$(CONFIG_PM) += pm-imx5.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y) + +obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o +obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o + +obj-$(CONFIG_MXC_TZIC) += tzic.o +obj-$(CONFIG_MXC_AVIC) += avic.o + +obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o + +ifeq ($(CONFIG_CPU_IDLE),y) +obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o +obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o +obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o +obj-$(CONFIG_SOC_IMX6SLL) += cpuidle-imx6sx.o +obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o +obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o +endif + +ifdef CONFIG_SND_IMX_SOC +obj-y += ssi-fiq.o +obj-y += ssi-fiq-ksym.o +endif + +# i.MX21 based machines +obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o + +# i.MX27 based machines +obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o +obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o +obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o +obj-$(CONFIG_MACH_PCA100) += mach-pca100.o +obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o + +# i.MX31 based machines +obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o +obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o +obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o +obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o +obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o +obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o +obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \ + mx31moboard-marxbot.o mx31moboard-smartbot.o +obj-$(CONFIG_MACH_QONG) += mach-qong.o +obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o +obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o +obj-$(CONFIG_MACH_BUG) += mach-bug.o +obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o + +# i.MX35 based machines +obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o +obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o +obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o +obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o + +obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o +obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o +obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o +obj-$(CONFIG_HAVE_IMX_SRC) += src.o +ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),) +AFLAGS_headsmp.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SMP) += headsmp.o platsmp.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +endif +obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o +obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o +obj-$(CONFIG_SOC_IMX6SLL) += mach-imx6sl.o +obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o +obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o +obj-$(CONFIG_SOC_IMX7D_CA7) += mach-imx7d.o +obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o + +ifeq ($(CONFIG_SUSPEND),y) +AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o +obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o +endif +ifeq ($(CONFIG_ARM_CPU_SUSPEND),y) +AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SOC_IMX6) += resume-imx6.o +endif +obj-$(CONFIG_SOC_IMX6) += pm-imx6.o + +obj-$(CONFIG_SOC_IMX1) += mach-imx1.o +obj-$(CONFIG_SOC_IMX50) += mach-imx50.o +obj-$(CONFIG_SOC_IMX51) += mach-imx51.o +obj-$(CONFIG_SOC_IMX53) += mach-imx53.o + +obj-$(CONFIG_SOC_VF610) += mach-vf610.o + +obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o + +obj-y += devices/ diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/arch/arm/mach-imx/Makefile.boot diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c new file mode 100644 index 000000000..61f3d94f1 --- /dev/null +++ b/arch/arm/mach-imx/anatop.c @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2013-2015 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include "common.h" +#include "hardware.h" + +#define REG_SET 0x4 +#define REG_CLR 0x8 + +#define ANADIG_REG_2P5 0x130 +#define ANADIG_REG_CORE 0x140 +#define ANADIG_ANA_MISC0 0x150 +#define ANADIG_USB1_CHRG_DETECT 0x1b0 +#define ANADIG_USB2_CHRG_DETECT 0x210 +#define ANADIG_DIGPROG 0x260 +#define ANADIG_DIGPROG_IMX6SL 0x280 +#define ANADIG_DIGPROG_IMX7D 0x800 + +#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000 +#define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN 0x8 +#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000 +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x1000 +/* Below MISC0_DISCON_HIGH_SNVS is only for i.MX6SL */ +#define BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS 0x2000 +#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x80000 +#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x100000 + +static struct regmap *anatop; + +static void imx_anatop_enable_weak2p5(bool enable) +{ + u32 reg, val; + + regmap_read(anatop, ANADIG_ANA_MISC0, &val); + + /* can only be enabled when stop_mode_config is clear. */ + reg = ANADIG_REG_2P5; + reg += (enable && (val & BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG) == 0) ? + REG_SET : REG_CLR; + regmap_write(anatop, reg, BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG); +} + +static void imx_anatop_enable_fet_odrive(bool enable) +{ + regmap_write(anatop, ANADIG_REG_CORE + (enable ? REG_SET : REG_CLR), + BM_ANADIG_REG_CORE_FET_ODRIVE); +} + +static inline void imx_anatop_enable_2p5_pulldown(bool enable) +{ + regmap_write(anatop, ANADIG_REG_2P5 + (enable ? REG_SET : REG_CLR), + BM_ANADIG_REG_2P5_ENABLE_PULLDOWN); +} + +static inline void imx_anatop_disconnect_high_snvs(bool enable) +{ + regmap_write(anatop, ANADIG_ANA_MISC0 + (enable ? REG_SET : REG_CLR), + BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS); +} + +void imx_anatop_pre_suspend(void) +{ + if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2) + imx_anatop_enable_2p5_pulldown(true); + else + imx_anatop_enable_weak2p5(true); + + imx_anatop_enable_fet_odrive(true); + + if (cpu_is_imx6sl()) + imx_anatop_disconnect_high_snvs(true); +} + +void imx_anatop_post_resume(void) +{ + if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2) + imx_anatop_enable_2p5_pulldown(false); + else + imx_anatop_enable_weak2p5(false); + + imx_anatop_enable_fet_odrive(false); + + if (cpu_is_imx6sl()) + imx_anatop_disconnect_high_snvs(false); + +} + +static void imx_anatop_usb_chrg_detect_disable(void) +{ + regmap_write(anatop, ANADIG_USB1_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B + | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); + regmap_write(anatop, ANADIG_USB2_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B | + BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); +} + +void __init imx_init_revision_from_anatop(void) +{ + struct device_node *np; + void __iomem *anatop_base; + unsigned int revision; + u32 digprog; + u16 offset = ANADIG_DIGPROG; + u8 major_part, minor_part; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); + anatop_base = of_iomap(np, 0); + WARN_ON(!anatop_base); + if (of_device_is_compatible(np, "fsl,imx6sl-anatop")) + offset = ANADIG_DIGPROG_IMX6SL; + if (of_device_is_compatible(np, "fsl,imx7d-anatop")) + offset = ANADIG_DIGPROG_IMX7D; + digprog = readl_relaxed(anatop_base + offset); + iounmap(anatop_base); + + /* + * On i.MX7D digprog value match linux version format, so + * it needn't map again and we can use register value directly. + */ + if (of_device_is_compatible(np, "fsl,imx7d-anatop")) { + revision = digprog & 0xff; + } else { + /* + * MAJOR: [15:8], the major silicon revison; + * MINOR: [7: 0], the minor silicon revison; + * + * please refer to the i.MX RM for the detailed + * silicon revison bit define. + * format the major part and minor part to match the + * linux kernel soc version format. + */ + major_part = (digprog >> 8) & 0xf; + minor_part = digprog & 0xf; + revision = ((major_part + 1) << 4) | minor_part; + } + + mxc_set_cpu_type(digprog >> 16 & 0xff); + imx_set_soc_revision(revision); +} + +void __init imx_anatop_init(void) +{ + anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop"); + if (IS_ERR(anatop)) { + pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__); + return; + } + + imx_anatop_usb_chrg_detect_disable(); +} diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c new file mode 100644 index 000000000..c0434a366 --- /dev/null +++ b/arch/arm/mach-imx/avic.c @@ -0,0 +1,235 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/module.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <asm/mach/irq.h> +#include <asm/exception.h> + +#include "common.h" +#include "hardware.h" +#include "irq-common.h" + +#define AVIC_INTCNTL 0x00 /* int control reg */ +#define AVIC_NIMASK 0x04 /* int mask reg */ +#define AVIC_INTENNUM 0x08 /* int enable number reg */ +#define AVIC_INTDISNUM 0x0C /* int disable number reg */ +#define AVIC_INTENABLEH 0x10 /* int enable reg high */ +#define AVIC_INTENABLEL 0x14 /* int enable reg low */ +#define AVIC_INTTYPEH 0x18 /* int type reg high */ +#define AVIC_INTTYPEL 0x1C /* int type reg low */ +#define AVIC_NIPRIORITY(x) (0x20 + 4 * (7 - (x))) /* int priority */ +#define AVIC_NIVECSR 0x40 /* norm int vector/status */ +#define AVIC_FIVECSR 0x44 /* fast int vector/status */ +#define AVIC_INTSRCH 0x48 /* int source reg high */ +#define AVIC_INTSRCL 0x4C /* int source reg low */ +#define AVIC_INTFRCH 0x50 /* int force reg high */ +#define AVIC_INTFRCL 0x54 /* int force reg low */ +#define AVIC_NIPNDH 0x58 /* norm int pending high */ +#define AVIC_NIPNDL 0x5C /* norm int pending low */ +#define AVIC_FIPNDH 0x60 /* fast int pending high */ +#define AVIC_FIPNDL 0x64 /* fast int pending low */ + +#define AVIC_NUM_IRQS 64 + +/* low power interrupt mask registers */ +#define MX25_CCM_LPIMR0 0x68 +#define MX25_CCM_LPIMR1 0x6C + +static void __iomem *avic_base; +static void __iomem *mx25_ccm_base; +static struct irq_domain *domain; + +#ifdef CONFIG_FIQ +static int avic_set_irq_fiq(unsigned int hwirq, unsigned int type) +{ + unsigned int irqt; + + if (hwirq >= AVIC_NUM_IRQS) + return -EINVAL; + + if (hwirq < AVIC_NUM_IRQS / 2) { + irqt = imx_readl(avic_base + AVIC_INTTYPEL) & ~(1 << hwirq); + imx_writel(irqt | (!!type << hwirq), avic_base + AVIC_INTTYPEL); + } else { + hwirq -= AVIC_NUM_IRQS / 2; + irqt = imx_readl(avic_base + AVIC_INTTYPEH) & ~(1 << hwirq); + imx_writel(irqt | (!!type << hwirq), avic_base + AVIC_INTTYPEH); + } + + return 0; +} +#endif /* CONFIG_FIQ */ + + +static struct mxc_extra_irq avic_extra_irq = { +#ifdef CONFIG_FIQ + .set_irq_fiq = avic_set_irq_fiq, +#endif +}; + +#ifdef CONFIG_PM +static u32 avic_saved_mask_reg[2]; + +static void avic_irq_suspend(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct irq_chip_type *ct = gc->chip_types; + int idx = d->hwirq >> 5; + + avic_saved_mask_reg[idx] = imx_readl(avic_base + ct->regs.mask); + imx_writel(gc->wake_active, avic_base + ct->regs.mask); + + if (mx25_ccm_base) { + u8 offs = d->hwirq < AVIC_NUM_IRQS / 2 ? + MX25_CCM_LPIMR0 : MX25_CCM_LPIMR1; + /* + * The interrupts which are still enabled will be used as wakeup + * sources. Allow those interrupts in low-power mode. + * The LPIMR registers use 0 to allow an interrupt, the AVIC + * registers use 1. + */ + imx_writel(~gc->wake_active, mx25_ccm_base + offs); + } +} + +static void avic_irq_resume(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct irq_chip_type *ct = gc->chip_types; + int idx = d->hwirq >> 5; + + imx_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask); + + if (mx25_ccm_base) { + u8 offs = d->hwirq < AVIC_NUM_IRQS / 2 ? + MX25_CCM_LPIMR0 : MX25_CCM_LPIMR1; + + imx_writel(0xffffffff, mx25_ccm_base + offs); + } +} + +#else +#define avic_irq_suspend NULL +#define avic_irq_resume NULL +#endif + +static __init void avic_init_gc(int idx, unsigned int irq_start) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("mxc-avic", 1, irq_start, avic_base, + handle_level_irq); + gc->private = &avic_extra_irq; + gc->wake_enabled = IRQ_MSK(32); + + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->chip.irq_ack = irq_gc_mask_clr_bit; + ct->chip.irq_set_wake = irq_gc_set_wake; + ct->chip.irq_suspend = avic_irq_suspend; + ct->chip.irq_resume = avic_irq_resume; + ct->regs.mask = !idx ? AVIC_INTENABLEL : AVIC_INTENABLEH; + ct->regs.ack = ct->regs.mask; + + irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); +} + +static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) +{ + u32 nivector; + + do { + nivector = imx_readl(avic_base + AVIC_NIVECSR) >> 16; + if (nivector == 0xffff) + break; + + handle_domain_irq(domain, nivector, regs); + } while (1); +} + +/* + * This function initializes the AVIC hardware and disables all the + * interrupts. It registers the interrupt enable and disable functions + * to the kernel for each interrupt source. + */ +void __init mxc_init_irq(void __iomem *irqbase) +{ + struct device_node *np; + int irq_base; + int i; + + avic_base = irqbase; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm"); + mx25_ccm_base = of_iomap(np, 0); + + if (mx25_ccm_base) { + /* + * By default, we mask all interrupts. We set the actual mask + * before we go into low-power mode. + */ + imx_writel(0xffffffff, mx25_ccm_base + MX25_CCM_LPIMR0); + imx_writel(0xffffffff, mx25_ccm_base + MX25_CCM_LPIMR1); + } + + /* put the AVIC into the reset value with + * all interrupts disabled + */ + imx_writel(0, avic_base + AVIC_INTCNTL); + imx_writel(0x1f, avic_base + AVIC_NIMASK); + + /* disable all interrupts */ + imx_writel(0, avic_base + AVIC_INTENABLEH); + imx_writel(0, avic_base + AVIC_INTENABLEL); + + /* all IRQ no FIQ */ + imx_writel(0, avic_base + AVIC_INTTYPEH); + imx_writel(0, avic_base + AVIC_INTTYPEL); + + irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id()); + WARN_ON(irq_base < 0); + + np = of_find_compatible_node(NULL, NULL, "fsl,avic"); + domain = irq_domain_add_legacy(np, AVIC_NUM_IRQS, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = 0; i < AVIC_NUM_IRQS / 32; i++, irq_base += 32) + avic_init_gc(i, irq_base); + + /* Set default priority value (0) for all IRQ's */ + for (i = 0; i < 8; i++) + imx_writel(0, avic_base + AVIC_NIPRIORITY(i)); + + set_handle_irq(avic_handle_irq); + +#ifdef CONFIG_FIQ + /* Initialize FIQ */ + init_FIQ(FIQ_START); +#endif + + printk(KERN_INFO "MXC IRQ initialized\n"); +} diff --git a/arch/arm/mach-imx/board-mx31lilly.h b/arch/arm/mach-imx/board-mx31lilly.h new file mode 100644 index 000000000..0df71bfef --- /dev/null +++ b/arch/arm/mach-imx/board-mx31lilly.h @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> + * + * Based on code for mobots boards, + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ +#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ + +#ifndef __ASSEMBLY__ + +enum mx31lilly_boards { + MX31LILLY_NOBOARD = 0, + MX31LILLY_DB = 1, +}; + +/* + * This CPU module needs a baseboard to work. After basic initializing + * its own devices, it calls the baseboard's init function. + */ + +extern void mx31lilly_db_init(void); + +#endif + +#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */ diff --git a/arch/arm/mach-imx/board-mx31lite.h b/arch/arm/mach-imx/board-mx31lite.h new file mode 100644 index 000000000..c1ad0ae80 --- /dev/null +++ b/arch/arm/mach-imx/board-mx31lite.h @@ -0,0 +1,42 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> + * + * Based on code for mobots boards, + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__ +#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__ + +#ifndef __ASSEMBLY__ + +enum mx31lite_boards { + MX31LITE_NOBOARD = 0, + MX31LITE_DB = 1, +}; + +/* + * This CPU module needs a baseboard to work. After basic initializing + * its own devices, it calls the baseboard's init function. + */ + +extern void mx31lite_db_init(void); + +#endif + +#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */ diff --git a/arch/arm/mach-imx/board-mx31moboard.h b/arch/arm/mach-imx/board-mx31moboard.h new file mode 100644 index 000000000..de1454389 --- /dev/null +++ b/arch/arm/mach-imx/board-mx31moboard.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ +#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ + +#ifndef __ASSEMBLY__ + +enum mx31moboard_boards { + MX31NOBOARD = 0, + MX31DEVBOARD = 1, + MX31MARXBOT = 2, + MX31SMARTBOT = 3, + MX31EYEBOT = 4, +}; + +/* + * This CPU module needs a baseboard to work. After basic initializing + * its own devices, it calls the baseboard's init function. + */ + +extern void mx31moboard_devboard_init(void); +extern void mx31moboard_marxbot_init(void); +extern void mx31moboard_smartbot_init(int board); + +#endif + +#endif /* __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ */ diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h new file mode 100644 index 000000000..9728e39cd --- /dev/null +++ b/arch/arm/mach-imx/common.h @@ -0,0 +1,147 @@ +/* + * Copyright 2004-2014 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_COMMON_H__ +#define __ASM_ARCH_MXC_COMMON_H__ + +#include <linux/reboot.h> + +struct irq_data; +struct platform_device; +struct pt_regs; +struct clk; +struct device_node; +enum mxc_cpu_pwr_mode; +struct of_device_id; + +void mx21_map_io(void); +void mx27_map_io(void); +void mx31_map_io(void); +void mx35_map_io(void); +void imx21_init_early(void); +void imx27_init_early(void); +void imx31_init_early(void); +void imx35_init_early(void); +void mxc_init_irq(void __iomem *); +void mx21_init_irq(void); +void mx27_init_irq(void); +void mx31_init_irq(void); +void mx35_init_irq(void); +void imx21_soc_init(void); +void imx27_soc_init(void); +void imx31_soc_init(void); +void imx35_soc_init(void); +int mx21_clocks_init(unsigned long lref, unsigned long fref); +int mx27_clocks_init(unsigned long fref); +int mx31_clocks_init(unsigned long fref); +int mx35_clocks_init(void); +struct platform_device *mxc_register_gpio(char *name, int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); +void mxc_set_cpu_type(unsigned int type); +void mxc_restart(enum reboot_mode, const char *); +void mxc_arch_reset_init(void __iomem *); +void imx1_reset_init(void __iomem *); +void imx_set_aips(void __iomem *); +void imx_aips_allow_unprivileged_access(const char *compat); +int mxc_device_init(void); +void imx_set_soc_revision(unsigned int rev); +void imx_init_revision_from_anatop(void); +struct device *imx_soc_device_init(void); +void imx6_enable_rbc(bool enable); +void imx_gpc_check_dt(void); +void imx_gpc_set_arm_power_in_lpm(bool power_off); +void imx_gpc_set_l2_mem_power_in_lpm(bool power_off); +void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw); +void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw); +void imx25_pm_init(void); +void imx27_pm_init(void); +void imx5_pmu_init(void); + +enum mxc_cpu_pwr_mode { + WAIT_CLOCKED, /* wfi only */ + WAIT_UNCLOCKED, /* WAIT */ + WAIT_UNCLOCKED_POWER_OFF, /* WAIT + SRPG */ + STOP_POWER_ON, /* just STOP */ + STOP_POWER_OFF, /* STOP + SRPG */ +}; + +void imx_enable_cpu(int cpu, bool enable); +void imx_set_cpu_jump(int cpu, void *jump_addr); +u32 imx_get_cpu_arg(int cpu); +void imx_set_cpu_arg(int cpu, u32 arg); +#ifdef CONFIG_SMP +void v7_secondary_startup(void); +void imx_scu_map_io(void); +void imx_smp_prepare(void); +#else +static inline void imx_scu_map_io(void) {} +static inline void imx_smp_prepare(void) {} +#endif +void imx_src_init(void); +void imx_gpc_pre_suspend(bool arm_power_off); +void imx_gpc_post_resume(void); +void imx_gpc_mask_all(void); +void imx_gpc_restore_all(void); +void imx_gpc_hwirq_mask(unsigned int hwirq); +void imx_gpc_hwirq_unmask(unsigned int hwirq); +void imx_anatop_init(void); +void imx_anatop_pre_suspend(void); +void imx_anatop_post_resume(void); +int imx6_set_lpm(enum mxc_cpu_pwr_mode mode); +void imx6_set_int_mem_clk_lpm(bool enable); +void imx6sl_set_wait_clk(bool enter); +int imx_mmdc_get_ddr_type(void); + +void imx_cpu_die(unsigned int cpu); +int imx_cpu_kill(unsigned int cpu); + +#ifdef CONFIG_SUSPEND +void imx53_suspend(void __iomem *ocram_vbase); +extern const u32 imx53_suspend_sz; +void imx6_suspend(void __iomem *ocram_vbase); +#else +static inline void imx53_suspend(void __iomem *ocram_vbase) {} +static const u32 imx53_suspend_sz; +static inline void imx6_suspend(void __iomem *ocram_vbase) {} +#endif + +void v7_cpu_resume(void); + +void imx6_pm_ccm_init(const char *ccm_compat); +void imx6q_pm_init(void); +void imx6dl_pm_init(void); +void imx6sl_pm_init(void); +void imx6sx_pm_init(void); +void imx6ul_pm_init(void); + +#ifdef CONFIG_PM +void imx51_pm_init(void); +void imx53_pm_init(void); +#else +static inline void imx51_pm_init(void) {} +static inline void imx53_pm_init(void) {} +#endif + +#ifdef CONFIG_NEON +int mx51_neon_fixup(void); +#else +static inline int mx51_neon_fixup(void) { return 0; } +#endif + +#ifdef CONFIG_CACHE_L2X0 +void imx_init_l2cache(void); +#else +static inline void imx_init_l2cache(void) {} +#endif + +extern const struct smp_operations imx_smp_ops; +extern const struct smp_operations ls1021a_smp_ops; + +#endif diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c new file mode 100644 index 000000000..d0ad67e80 --- /dev/null +++ b/arch/arm/mach-imx/cpu-imx25.c @@ -0,0 +1,51 @@ +/* + * MX25 CPU type detection + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/module.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "iim.h" +#include "hardware.h" + +static int mx25_cpu_rev = -1; + +static int mx25_read_cpu_rev(void) +{ + u32 rev; + void __iomem *iim_base; + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim"); + iim_base = of_iomap(np, 0); + BUG_ON(!iim_base); + rev = readl(iim_base + MXC_IIMSREV); + iounmap(iim_base); + + switch (rev) { + case 0x00: + return IMX_CHIP_REVISION_1_0; + case 0x01: + return IMX_CHIP_REVISION_1_1; + default: + return IMX_CHIP_REVISION_UNKNOWN; + } +} + +int mx25_revision(void) +{ + if (mx25_cpu_rev == -1) + mx25_cpu_rev = mx25_read_cpu_rev(); + + return mx25_cpu_rev; +} +EXPORT_SYMBOL(mx25_revision); diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c new file mode 100644 index 000000000..8d2ae4091 --- /dev/null +++ b/arch/arm/mach-imx/cpu-imx27.c @@ -0,0 +1,73 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +/* + * i.MX27 specific CPU detection code + */ + +#include <linux/io.h> +#include <linux/module.h> + +#include "hardware.h" + +static int mx27_cpu_rev = -1; +static int mx27_cpu_partnumber; + +#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */ + +static int mx27_read_cpu_rev(void) +{ + u32 val; + /* + * now we have access to the IO registers. As we need + * the silicon revision very early we read it here to + * avoid any further hooks + */ + val = imx_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID)); + + mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF); + + switch (val >> 28) { + case 0: + return IMX_CHIP_REVISION_1_0; + case 1: + return IMX_CHIP_REVISION_2_0; + case 2: + return IMX_CHIP_REVISION_2_1; + default: + return IMX_CHIP_REVISION_UNKNOWN; + } +} + +/* + * Returns: + * the silicon revision of the cpu + * -EINVAL - not a mx27 + */ +int mx27_revision(void) +{ + if (mx27_cpu_rev == -1) + mx27_cpu_rev = mx27_read_cpu_rev(); + + if (mx27_cpu_partnumber != 0x8821) + return -EINVAL; + + return mx27_cpu_rev; +} +EXPORT_SYMBOL(mx27_revision); diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c new file mode 100644 index 000000000..3daf1959a --- /dev/null +++ b/arch/arm/mach-imx/cpu-imx31.c @@ -0,0 +1,63 @@ +/* + * MX31 CPU type detection + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/io.h> + +#include "common.h" +#include "hardware.h" +#include "iim.h" + +static int mx31_cpu_rev = -1; + +static struct { + u8 srev; + const char *name; + unsigned int rev; +} mx31_cpu_type[] = { + { .srev = 0x00, .name = "i.MX31(L)", .rev = IMX_CHIP_REVISION_1_0 }, + { .srev = 0x10, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x11, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x12, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x13, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x14, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_2 }, + { .srev = 0x15, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_2 }, + { .srev = 0x28, .name = "i.MX31", .rev = IMX_CHIP_REVISION_2_0 }, + { .srev = 0x29, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_2_0 }, +}; + +static int mx31_read_cpu_rev(void) +{ + u32 i, srev; + + /* read SREV register from IIM module */ + srev = imx_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV)); + srev &= 0xff; + + for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) + if (srev == mx31_cpu_type[i].srev) { + imx_print_silicon_rev(mx31_cpu_type[i].name, + mx31_cpu_type[i].rev); + return mx31_cpu_type[i].rev; + } + + imx_print_silicon_rev("i.MX31", IMX_CHIP_REVISION_UNKNOWN); + return IMX_CHIP_REVISION_UNKNOWN; +} + +int mx31_revision(void) +{ + if (mx31_cpu_rev == -1) + mx31_cpu_rev = mx31_read_cpu_rev(); + + return mx31_cpu_rev; +} +EXPORT_SYMBOL(mx31_revision); diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c new file mode 100644 index 000000000..8a54234df --- /dev/null +++ b/arch/arm/mach-imx/cpu-imx35.c @@ -0,0 +1,43 @@ +/* + * MX35 CPU type detection + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/module.h> +#include <linux/io.h> + +#include "hardware.h" +#include "iim.h" + +static int mx35_cpu_rev = -1; + +static int mx35_read_cpu_rev(void) +{ + u32 rev; + + rev = imx_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); + switch (rev) { + case 0x00: + return IMX_CHIP_REVISION_1_0; + case 0x10: + return IMX_CHIP_REVISION_2_0; + case 0x11: + return IMX_CHIP_REVISION_2_1; + default: + return IMX_CHIP_REVISION_UNKNOWN; + } +} + +int mx35_revision(void) +{ + if (mx35_cpu_rev == -1) + mx35_cpu_rev = mx35_read_cpu_rev(); + + return mx35_cpu_rev; +} +EXPORT_SYMBOL(mx35_revision); diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c new file mode 100644 index 000000000..e210bac18 --- /dev/null +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -0,0 +1,164 @@ +/* + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * This file contains the CPU initialization code. + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "hardware.h" +#include "common.h" + +static int mx5_cpu_rev = -1; + +#define IIM_SREV 0x24 + +static u32 imx5_read_srev_reg(const char *compat) +{ + void __iomem *iim_base; + struct device_node *np; + u32 srev; + + np = of_find_compatible_node(NULL, NULL, compat); + iim_base = of_iomap(np, 0); + WARN_ON(!iim_base); + + srev = readl(iim_base + IIM_SREV) & 0xff; + + iounmap(iim_base); + + return srev; +} + +static int get_mx51_srev(void) +{ + u32 rev = imx5_read_srev_reg("fsl,imx51-iim"); + + switch (rev) { + case 0x0: + return IMX_CHIP_REVISION_2_0; + case 0x10: + return IMX_CHIP_REVISION_3_0; + default: + return IMX_CHIP_REVISION_UNKNOWN; + } +} + +/* + * Returns: + * the silicon revision of the cpu + */ +int mx51_revision(void) +{ + if (mx5_cpu_rev == -1) + mx5_cpu_rev = get_mx51_srev(); + + return mx5_cpu_rev; +} +EXPORT_SYMBOL(mx51_revision); + +#ifdef CONFIG_NEON + +/* + * All versions of the silicon before Rev. 3 have broken NEON implementations. + * Dependent on link order - so the assumption is that vfp_init is called + * before us. + */ +int __init mx51_neon_fixup(void) +{ + if (mx51_revision() < IMX_CHIP_REVISION_3_0 && + (elf_hwcap & HWCAP_NEON)) { + elf_hwcap &= ~HWCAP_NEON; + pr_info("Turning off NEON support, detected broken NEON implementation\n"); + } + return 0; +} + +#endif + +static int get_mx53_srev(void) +{ + u32 rev = imx5_read_srev_reg("fsl,imx53-iim"); + + switch (rev) { + case 0x0: + return IMX_CHIP_REVISION_1_0; + case 0x2: + return IMX_CHIP_REVISION_2_0; + case 0x3: + return IMX_CHIP_REVISION_2_1; + default: + return IMX_CHIP_REVISION_UNKNOWN; + } +} + +/* + * Returns: + * the silicon revision of the cpu + */ +int mx53_revision(void) +{ + if (mx5_cpu_rev == -1) + mx5_cpu_rev = get_mx53_srev(); + + return mx5_cpu_rev; +} +EXPORT_SYMBOL(mx53_revision); + +#define ARM_GPC 0x4 +#define DBGEN BIT(16) + +/* + * This enables the DBGEN bit in ARM_GPC register, which is + * required for accessing some performance counter features. + * Technically it is only required while perf is used, but to + * keep the source code simple we just enable it all the time + * when the kernel configuration allows using the feature. + */ +void __init imx5_pmu_init(void) +{ + void __iomem *tigerp_base; + struct device_node *np; + u32 gpc; + + if (!IS_ENABLED(CONFIG_ARM_PMU)) + return; + + np = of_find_compatible_node(NULL, NULL, "arm,cortex-a8-pmu"); + if (!np) + return; + + if (!of_property_read_bool(np, "secure-reg-access")) + goto exit; + + of_node_put(np); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx51-tigerp"); + if (!np) + return; + + tigerp_base = of_iomap(np, 0); + if (!tigerp_base) + goto exit; + + gpc = readl_relaxed(tigerp_base + ARM_GPC); + gpc |= DBGEN; + writel_relaxed(gpc, tigerp_base + ARM_GPC); + iounmap(tigerp_base); +exit: + of_node_put(np); + +} diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c new file mode 100644 index 000000000..c6b1bf97a --- /dev/null +++ b/arch/arm/mach-imx/cpu.c @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/err.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> + +#include "hardware.h" +#include "common.h" + +unsigned int __mxc_cpu_type; +static unsigned int imx_soc_revision; + +void mxc_set_cpu_type(unsigned int type) +{ + __mxc_cpu_type = type; +} + +void imx_set_soc_revision(unsigned int rev) +{ + imx_soc_revision = rev; +} + +unsigned int imx_get_soc_revision(void) +{ + return imx_soc_revision; +} + +void imx_print_silicon_rev(const char *cpu, int srev) +{ + if (srev == IMX_CHIP_REVISION_UNKNOWN) + pr_info("CPU identified as %s, unknown revision\n", cpu); + else + pr_info("CPU identified as %s, silicon rev %d.%d\n", + cpu, (srev >> 4) & 0xf, srev & 0xf); +} + +void __init imx_set_aips(void __iomem *base) +{ + unsigned int reg; +/* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + imx_writel(0x77777777, base + 0x0); + imx_writel(0x77777777, base + 0x4); + +/* + * Set all OPACRx to be non-bufferable, to not require + * supervisor privilege level for access, allow for + * write access and untrusted master access. + */ + imx_writel(0x0, base + 0x40); + imx_writel(0x0, base + 0x44); + imx_writel(0x0, base + 0x48); + imx_writel(0x0, base + 0x4C); + reg = imx_readl(base + 0x50) & 0x00FFFFFF; + imx_writel(reg, base + 0x50); +} + +void __init imx_aips_allow_unprivileged_access( + const char *compat) +{ + void __iomem *aips_base_addr; + struct device_node *np; + + for_each_compatible_node(np, NULL, compat) { + aips_base_addr = of_iomap(np, 0); + WARN_ON(!aips_base_addr); + imx_set_aips(aips_base_addr); + } +} + +struct device * __init imx_soc_device_init(void) +{ + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + struct device_node *root; + const char *soc_id; + int ret; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return NULL; + + soc_dev_attr->family = "Freescale i.MX"; + + root = of_find_node_by_path("/"); + ret = of_property_read_string(root, "model", &soc_dev_attr->machine); + of_node_put(root); + if (ret) + goto free_soc; + + switch (__mxc_cpu_type) { + case MXC_CPU_MX1: + soc_id = "i.MX1"; + break; + case MXC_CPU_MX21: + soc_id = "i.MX21"; + break; + case MXC_CPU_MX25: + soc_id = "i.MX25"; + break; + case MXC_CPU_MX27: + soc_id = "i.MX27"; + break; + case MXC_CPU_MX31: + soc_id = "i.MX31"; + break; + case MXC_CPU_MX35: + soc_id = "i.MX35"; + break; + case MXC_CPU_MX51: + soc_id = "i.MX51"; + break; + case MXC_CPU_MX53: + soc_id = "i.MX53"; + break; + case MXC_CPU_IMX6SL: + soc_id = "i.MX6SL"; + break; + case MXC_CPU_IMX6DL: + soc_id = "i.MX6DL"; + break; + case MXC_CPU_IMX6SX: + soc_id = "i.MX6SX"; + break; + case MXC_CPU_IMX6Q: + soc_id = "i.MX6Q"; + break; + case MXC_CPU_IMX6UL: + soc_id = "i.MX6UL"; + break; + case MXC_CPU_IMX6ULL: + soc_id = "i.MX6ULL"; + break; + case MXC_CPU_IMX6SLL: + soc_id = "i.MX6SLL"; + break; + case MXC_CPU_IMX7D: + soc_id = "i.MX7D"; + break; + default: + soc_id = "Unknown"; + } + soc_dev_attr->soc_id = soc_id; + + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d", + (imx_soc_revision >> 4) & 0xf, + imx_soc_revision & 0xf); + if (!soc_dev_attr->revision) + goto free_soc; + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) + goto free_rev; + + return soc_device_to_device(soc_dev); + +free_rev: + kfree(soc_dev_attr->revision); +free_soc: + kfree(soc_dev_attr); + return NULL; +} diff --git a/arch/arm/mach-imx/cpuidle-imx5.c b/arch/arm/mach-imx/cpuidle-imx5.c new file mode 100644 index 000000000..db0127606 --- /dev/null +++ b/arch/arm/mach-imx/cpuidle-imx5.c @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpuidle.h> +#include <linux/module.h> +#include <asm/system_misc.h> +#include "cpuidle.h" + +static int imx5_cpuidle_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + arm_pm_idle(); + return index; +} + +static struct cpuidle_driver imx5_cpuidle_driver = { + .name = "imx5_cpuidle", + .owner = THIS_MODULE, + .states[0] = { + .enter = imx5_cpuidle_enter, + .exit_latency = 2, + .target_residency = 1, + .name = "IMX5 SRPG", + .desc = "CPU state retained,powered off", + }, + .state_count = 1, +}; + +int __init imx5_cpuidle_init(void) +{ + return cpuidle_register(&imx5_cpuidle_driver, NULL); +} diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c new file mode 100644 index 000000000..326e870d7 --- /dev/null +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -0,0 +1,84 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpuidle.h> +#include <linux/module.h> +#include <asm/cpuidle.h> + +#include <soc/imx/cpuidle.h> + +#include "common.h" +#include "cpuidle.h" +#include "hardware.h" + +static int num_idle_cpus = 0; +static DEFINE_SPINLOCK(cpuidle_lock); + +static int imx6q_enter_wait(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + spin_lock(&cpuidle_lock); + if (++num_idle_cpus == num_online_cpus()) + imx6_set_lpm(WAIT_UNCLOCKED); + spin_unlock(&cpuidle_lock); + + cpu_do_idle(); + + spin_lock(&cpuidle_lock); + if (num_idle_cpus-- == num_online_cpus()) + imx6_set_lpm(WAIT_CLOCKED); + spin_unlock(&cpuidle_lock); + + return index; +} + +static struct cpuidle_driver imx6q_cpuidle_driver = { + .name = "imx6q_cpuidle", + .owner = THIS_MODULE, + .states = { + /* WFI */ + ARM_CPUIDLE_WFI_STATE, + /* WAIT */ + { + .exit_latency = 50, + .target_residency = 75, + .flags = CPUIDLE_FLAG_TIMER_STOP, + .enter = imx6q_enter_wait, + .name = "WAIT", + .desc = "Clock off", + }, + }, + .state_count = 2, + .safe_state_index = 0, +}; + +/* + * i.MX6 Q/DL has an erratum (ERR006687) that prevents the FEC from waking the + * CPUs when they are in wait(unclocked) state. As the hardware workaround isn't + * applicable to all boards, disable the deeper idle state when the workaround + * isn't present and the FEC is in use. + */ +void imx6q_cpuidle_fec_irqs_used(void) +{ + imx6q_cpuidle_driver.states[1].disabled = true; +} +EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_used); + +void imx6q_cpuidle_fec_irqs_unused(void) +{ + imx6q_cpuidle_driver.states[1].disabled = false; +} +EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_unused); + +int __init imx6q_cpuidle_init(void) +{ + /* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */ + imx6_set_int_mem_clk_lpm(true); + + return cpuidle_register(&imx6q_cpuidle_driver, NULL); +} diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c new file mode 100644 index 000000000..8d866fb67 --- /dev/null +++ b/arch/arm/mach-imx/cpuidle-imx6sl.c @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpuidle.h> +#include <linux/module.h> +#include <asm/cpuidle.h> + +#include "common.h" +#include "cpuidle.h" + +static int imx6sl_enter_wait(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + imx6_set_lpm(WAIT_UNCLOCKED); + /* + * Software workaround for ERR005311, see function + * description for details. + */ + imx6sl_set_wait_clk(true); + cpu_do_idle(); + imx6sl_set_wait_clk(false); + imx6_set_lpm(WAIT_CLOCKED); + + return index; +} + +static struct cpuidle_driver imx6sl_cpuidle_driver = { + .name = "imx6sl_cpuidle", + .owner = THIS_MODULE, + .states = { + /* WFI */ + ARM_CPUIDLE_WFI_STATE, + /* WAIT */ + { + .exit_latency = 50, + .target_residency = 75, + .flags = CPUIDLE_FLAG_TIMER_STOP, + .enter = imx6sl_enter_wait, + .name = "WAIT", + .desc = "Clock off", + }, + }, + .state_count = 2, + .safe_state_index = 0, +}; + +int __init imx6sl_cpuidle_init(void) +{ + return cpuidle_register(&imx6sl_cpuidle_driver, NULL); +} diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c new file mode 100644 index 000000000..3708a71f3 --- /dev/null +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c @@ -0,0 +1,118 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpuidle.h> +#include <linux/cpu_pm.h> +#include <linux/module.h> +#include <asm/cacheflush.h> +#include <asm/cpuidle.h> +#include <asm/suspend.h> + +#include "common.h" +#include "cpuidle.h" +#include "hardware.h" + +static int imx6sx_idle_finish(unsigned long val) +{ + /* + * for Cortex-A7 which has an internal L2 + * cache, need to flush it before powering + * down ARM platform, since flushing L1 cache + * here again has very small overhead, compared + * to adding conditional code for L2 cache type, + * just call flush_cache_all() is fine. + */ + flush_cache_all(); + cpu_do_idle(); + + return 0; +} + +static int imx6sx_enter_wait(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + imx6_set_lpm(WAIT_UNCLOCKED); + + switch (index) { + case 1: + cpu_do_idle(); + break; + case 2: + imx6_enable_rbc(true); + imx_gpc_set_arm_power_in_lpm(true); + imx_set_cpu_jump(0, v7_cpu_resume); + /* Need to notify there is a cpu pm operation. */ + cpu_pm_enter(); + cpu_cluster_pm_enter(); + + cpu_suspend(0, imx6sx_idle_finish); + + cpu_cluster_pm_exit(); + cpu_pm_exit(); + imx_gpc_set_arm_power_in_lpm(false); + imx6_enable_rbc(false); + break; + default: + break; + } + + imx6_set_lpm(WAIT_CLOCKED); + + return index; +} + +static struct cpuidle_driver imx6sx_cpuidle_driver = { + .name = "imx6sx_cpuidle", + .owner = THIS_MODULE, + .states = { + /* WFI */ + ARM_CPUIDLE_WFI_STATE, + /* WAIT */ + { + .exit_latency = 50, + .target_residency = 75, + .flags = CPUIDLE_FLAG_TIMER_STOP, + .enter = imx6sx_enter_wait, + .name = "WAIT", + .desc = "Clock off", + }, + /* WAIT + ARM power off */ + { + /* + * ARM gating 31us * 5 + RBC clear 65us + * and some margin for SW execution, here set it + * to 300us. + */ + .exit_latency = 300, + .target_residency = 500, + .flags = CPUIDLE_FLAG_TIMER_STOP, + .enter = imx6sx_enter_wait, + .name = "LOW-POWER-IDLE", + .desc = "ARM power off", + }, + }, + .state_count = 3, + .safe_state_index = 0, +}; + +int __init imx6sx_cpuidle_init(void) +{ + imx6_set_int_mem_clk_lpm(true); + imx6_enable_rbc(false); + imx_gpc_set_l2_mem_power_in_lpm(false); + /* + * set ARM power up/down timing to the fastest, + * sw2iso and sw can be set to one 32K cycle = 31us + * except for power up sw2iso which need to be + * larger than LDO ramp up time. + */ + imx_gpc_set_arm_power_up_timing(cpu_is_imx6sx() ? 0xf : 0x2, 1); + imx_gpc_set_arm_power_down_timing(1, 1); + + return cpuidle_register(&imx6sx_cpuidle_driver, NULL); +} diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h new file mode 100644 index 000000000..f9140128b --- /dev/null +++ b/arch/arm/mach-imx/cpuidle.h @@ -0,0 +1,35 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifdef CONFIG_CPU_IDLE +extern int imx5_cpuidle_init(void); +extern int imx6q_cpuidle_init(void); +extern int imx6sl_cpuidle_init(void); +extern int imx6sx_cpuidle_init(void); +#else +static inline int imx5_cpuidle_init(void) +{ + return 0; +} +static inline int imx6q_cpuidle_init(void) +{ + return 0; +} +static inline int imx6sl_cpuidle_init(void) +{ + return 0; +} +static inline int imx6sx_cpuidle_init(void) +{ + return 0; +} +#endif diff --git a/arch/arm/mach-imx/crmregs-imx3.h b/arch/arm/mach-imx/crmregs-imx3.h new file mode 100644 index 000000000..a1dfde53e --- /dev/null +++ b/arch/arm/mach-imx/crmregs-imx3.h @@ -0,0 +1,261 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ARCH_ARM_MACH_MX3_CRM_REGS_H__ +#define __ARCH_ARM_MACH_MX3_CRM_REGS_H__ + +#define CKIH_CLK_FREQ 26000000 +#define CKIH_CLK_FREQ_27MHZ 27000000 +#define CKIL_CLK_FREQ 32768 + +extern void __iomem *mx3_ccm_base; + +/* Register addresses */ +#define MXC_CCM_CCMR 0x00 +#define MXC_CCM_PDR0 0x04 +#define MXC_CCM_PDR1 0x08 +#define MX35_CCM_PDR2 0x0C +#define MXC_CCM_RCSR 0x0C +#define MX35_CCM_PDR3 0x10 +#define MXC_CCM_MPCTL 0x10 +#define MX35_CCM_PDR4 0x14 +#define MXC_CCM_UPCTL 0x14 +#define MX35_CCM_RCSR 0x18 +#define MXC_CCM_SRPCTL 0x18 +#define MX35_CCM_MPCTL 0x1C +#define MXC_CCM_COSR 0x1C +#define MX35_CCM_PPCTL 0x20 +#define MXC_CCM_CGR0 0x20 +#define MX35_CCM_ACMR 0x24 +#define MXC_CCM_CGR1 0x24 +#define MX35_CCM_COSR 0x28 +#define MXC_CCM_CGR2 0x28 +#define MX35_CCM_CGR0 0x2C +#define MXC_CCM_WIMR 0x2C +#define MX35_CCM_CGR1 0x30 +#define MXC_CCM_LDC 0x30 +#define MX35_CCM_CGR2 0x34 +#define MXC_CCM_DCVR0 0x34 +#define MX35_CCM_CGR3 0x38 +#define MXC_CCM_DCVR1 0x38 +#define MXC_CCM_DCVR2 0x3C +#define MXC_CCM_DCVR3 0x40 +#define MXC_CCM_LTR0 0x44 +#define MXC_CCM_LTR1 0x48 +#define MXC_CCM_LTR2 0x4C +#define MXC_CCM_LTR3 0x50 +#define MXC_CCM_LTBR0 0x54 +#define MXC_CCM_LTBR1 0x58 +#define MXC_CCM_PMCR0 0x5C +#define MXC_CCM_PMCR1 0x60 +#define MXC_CCM_PDR2 0x64 + +/* Register bit definitions */ +#define MXC_CCM_CCMR_WBEN (1 << 27) +#define MXC_CCM_CCMR_CSCS (1 << 25) +#define MXC_CCM_CCMR_PERCS (1 << 24) +#define MXC_CCM_CCMR_SSI1S_OFFSET 18 +#define MXC_CCM_CCMR_SSI1S_MASK (0x3 << 18) +#define MXC_CCM_CCMR_SSI2S_OFFSET 21 +#define MXC_CCM_CCMR_SSI2S_MASK (0x3 << 21) +#define MXC_CCM_CCMR_LPM_OFFSET 14 +#define MXC_CCM_CCMR_LPM_MASK (0x3 << 14) +#define MXC_CCM_CCMR_LPM_WAIT_MX35 (0x1 << 14) +#define MXC_CCM_CCMR_FIRS_OFFSET 11 +#define MXC_CCM_CCMR_FIRS_MASK (0x3 << 11) +#define MXC_CCM_CCMR_UPE (1 << 9) +#define MXC_CCM_CCMR_SPE (1 << 8) +#define MXC_CCM_CCMR_MDS (1 << 7) +#define MXC_CCM_CCMR_SBYCS (1 << 4) +#define MXC_CCM_CCMR_MPE (1 << 3) +#define MXC_CCM_CCMR_PRCS_OFFSET 1 +#define MXC_CCM_CCMR_PRCS_MASK (0x3 << 1) + +#define MXC_CCM_PDR0_CSI_PODF_OFFSET 26 +#define MXC_CCM_PDR0_CSI_PODF_MASK (0x3F << 26) +#define MXC_CCM_PDR0_CSI_PRDF_OFFSET 23 +#define MXC_CCM_PDR0_CSI_PRDF_MASK (0x7 << 23) +#define MXC_CCM_PDR0_PER_PODF_OFFSET 16 +#define MXC_CCM_PDR0_PER_PODF_MASK (0x1F << 16) +#define MXC_CCM_PDR0_HSP_PODF_OFFSET 11 +#define MXC_CCM_PDR0_HSP_PODF_MASK (0x7 << 11) +#define MXC_CCM_PDR0_NFC_PODF_OFFSET 8 +#define MXC_CCM_PDR0_NFC_PODF_MASK (0x7 << 8) +#define MXC_CCM_PDR0_IPG_PODF_OFFSET 6 +#define MXC_CCM_PDR0_IPG_PODF_MASK (0x3 << 6) +#define MXC_CCM_PDR0_MAX_PODF_OFFSET 3 +#define MXC_CCM_PDR0_MAX_PODF_MASK (0x7 << 3) +#define MXC_CCM_PDR0_MCU_PODF_OFFSET 0 +#define MXC_CCM_PDR0_MCU_PODF_MASK 0x7 + +#define MXC_CCM_PDR1_USB_PRDF_OFFSET 30 +#define MXC_CCM_PDR1_USB_PRDF_MASK (0x3 << 30) +#define MXC_CCM_PDR1_USB_PODF_OFFSET 27 +#define MXC_CCM_PDR1_USB_PODF_MASK (0x7 << 27) +#define MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET 24 +#define MXC_CCM_PDR1_FIRI_PRE_PODF_MASK (0x7 << 24) +#define MXC_CCM_PDR1_FIRI_PODF_OFFSET 18 +#define MXC_CCM_PDR1_FIRI_PODF_MASK (0x3F << 18) +#define MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET 15 +#define MXC_CCM_PDR1_SSI2_PRE_PODF_MASK (0x7 << 15) +#define MXC_CCM_PDR1_SSI2_PODF_OFFSET 9 +#define MXC_CCM_PDR1_SSI2_PODF_MASK (0x3F << 9) +#define MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET 6 +#define MXC_CCM_PDR1_SSI1_PRE_PODF_MASK (0x7 << 6) +#define MXC_CCM_PDR1_SSI1_PODF_OFFSET 0 +#define MXC_CCM_PDR1_SSI1_PODF_MASK 0x3F + +/* Bit definitions for RCSR */ +#define MXC_CCM_RCSR_NF16B 0x80000000 + +/* + * LTR0 register offsets + */ +#define MXC_CCM_LTR0_DIV3CK_OFFSET 1 +#define MXC_CCM_LTR0_DIV3CK_MASK (0x3 << 1) +#define MXC_CCM_LTR0_DNTHR_OFFSET 16 +#define MXC_CCM_LTR0_DNTHR_MASK (0x3F << 16) +#define MXC_CCM_LTR0_UPTHR_OFFSET 22 +#define MXC_CCM_LTR0_UPTHR_MASK (0x3F << 22) + +/* + * LTR1 register offsets + */ +#define MXC_CCM_LTR1_PNCTHR_OFFSET 0 +#define MXC_CCM_LTR1_PNCTHR_MASK 0x3F +#define MXC_CCM_LTR1_UPCNT_OFFSET 6 +#define MXC_CCM_LTR1_UPCNT_MASK (0xFF << 6) +#define MXC_CCM_LTR1_DNCNT_OFFSET 14 +#define MXC_CCM_LTR1_DNCNT_MASK (0xFF << 14) +#define MXC_CCM_LTR1_LTBRSR_MASK 0x400000 +#define MXC_CCM_LTR1_LTBRSR_OFFSET 22 +#define MXC_CCM_LTR1_LTBRSR 0x400000 +#define MXC_CCM_LTR1_LTBRSH 0x800000 + +/* + * LTR2 bit definitions. x ranges from 0 for WSW9 to 6 for WSW15 + */ +#define MXC_CCM_LTR2_WSW_OFFSET(x) (11 + (x) * 3) +#define MXC_CCM_LTR2_WSW_MASK(x) (0x7 << \ + MXC_CCM_LTR2_WSW_OFFSET((x))) +#define MXC_CCM_LTR2_EMAC_OFFSET 0 +#define MXC_CCM_LTR2_EMAC_MASK 0x1FF + +/* + * LTR3 bit definitions. x ranges from 0 for WSW0 to 8 for WSW8 + */ +#define MXC_CCM_LTR3_WSW_OFFSET(x) (5 + (x) * 3) +#define MXC_CCM_LTR3_WSW_MASK(x) (0x7 << \ + MXC_CCM_LTR3_WSW_OFFSET((x))) + +#define MXC_CCM_PMCR0_DFSUP1 0x80000000 +#define MXC_CCM_PMCR0_DFSUP1_SPLL (0 << 31) +#define MXC_CCM_PMCR0_DFSUP1_MPLL (1 << 31) +#define MXC_CCM_PMCR0_DFSUP0 0x40000000 +#define MXC_CCM_PMCR0_DFSUP0_PLL (0 << 30) +#define MXC_CCM_PMCR0_DFSUP0_PDR (1 << 30) +#define MXC_CCM_PMCR0_DFSUP_MASK (0x3 << 30) + +#define DVSUP_TURBO 0 +#define DVSUP_HIGH 1 +#define DVSUP_MEDIUM 2 +#define DVSUP_LOW 3 +#define MXC_CCM_PMCR0_DVSUP_TURBO (DVSUP_TURBO << 28) +#define MXC_CCM_PMCR0_DVSUP_HIGH (DVSUP_HIGH << 28) +#define MXC_CCM_PMCR0_DVSUP_MEDIUM (DVSUP_MEDIUM << 28) +#define MXC_CCM_PMCR0_DVSUP_LOW (DVSUP_LOW << 28) +#define MXC_CCM_PMCR0_DVSUP_OFFSET 28 +#define MXC_CCM_PMCR0_DVSUP_MASK (0x3 << 28) +#define MXC_CCM_PMCR0_UDSC 0x08000000 +#define MXC_CCM_PMCR0_UDSC_MASK (1 << 27) +#define MXC_CCM_PMCR0_UDSC_UP (1 << 27) +#define MXC_CCM_PMCR0_UDSC_DOWN (0 << 27) + +#define MXC_CCM_PMCR0_VSCNT_1 (0x0 << 24) +#define MXC_CCM_PMCR0_VSCNT_2 (0x1 << 24) +#define MXC_CCM_PMCR0_VSCNT_3 (0x2 << 24) +#define MXC_CCM_PMCR0_VSCNT_4 (0x3 << 24) +#define MXC_CCM_PMCR0_VSCNT_5 (0x4 << 24) +#define MXC_CCM_PMCR0_VSCNT_6 (0x5 << 24) +#define MXC_CCM_PMCR0_VSCNT_7 (0x6 << 24) +#define MXC_CCM_PMCR0_VSCNT_8 (0x7 << 24) +#define MXC_CCM_PMCR0_VSCNT_OFFSET 24 +#define MXC_CCM_PMCR0_VSCNT_MASK (0x7 << 24) +#define MXC_CCM_PMCR0_DVFEV 0x00800000 +#define MXC_CCM_PMCR0_DVFIS 0x00400000 +#define MXC_CCM_PMCR0_LBMI 0x00200000 +#define MXC_CCM_PMCR0_LBFL 0x00100000 +#define MXC_CCM_PMCR0_LBCF_4 (0x0 << 18) +#define MXC_CCM_PMCR0_LBCF_8 (0x1 << 18) +#define MXC_CCM_PMCR0_LBCF_12 (0x2 << 18) +#define MXC_CCM_PMCR0_LBCF_16 (0x3 << 18) +#define MXC_CCM_PMCR0_LBCF_OFFSET 18 +#define MXC_CCM_PMCR0_LBCF_MASK (0x3 << 18) +#define MXC_CCM_PMCR0_PTVIS 0x00020000 +#define MXC_CCM_PMCR0_UPDTEN 0x00010000 +#define MXC_CCM_PMCR0_UPDTEN_MASK (0x1 << 16) +#define MXC_CCM_PMCR0_FSVAIM 0x00008000 +#define MXC_CCM_PMCR0_FSVAI_OFFSET 13 +#define MXC_CCM_PMCR0_FSVAI_MASK (0x3 << 13) +#define MXC_CCM_PMCR0_DPVCR 0x00001000 +#define MXC_CCM_PMCR0_DPVV 0x00000800 +#define MXC_CCM_PMCR0_WFIM 0x00000400 +#define MXC_CCM_PMCR0_DRCE3 0x00000200 +#define MXC_CCM_PMCR0_DRCE2 0x00000100 +#define MXC_CCM_PMCR0_DRCE1 0x00000080 +#define MXC_CCM_PMCR0_DRCE0 0x00000040 +#define MXC_CCM_PMCR0_DCR 0x00000020 +#define MXC_CCM_PMCR0_DVFEN 0x00000010 +#define MXC_CCM_PMCR0_PTVAIM 0x00000008 +#define MXC_CCM_PMCR0_PTVAI_OFFSET 1 +#define MXC_CCM_PMCR0_PTVAI_MASK (0x3 << 1) +#define MXC_CCM_PMCR0_DPTEN 0x00000001 + +#define MXC_CCM_PMCR1_DVGP_OFFSET 0 +#define MXC_CCM_PMCR1_DVGP_MASK (0xF) + +#define MXC_CCM_PMCR1_PLLRDIS (0x1 << 7) +#define MXC_CCM_PMCR1_EMIRQ_EN (0x1 << 8) + +#define MXC_CCM_DCVR_ULV_MASK (0x3FF << 22) +#define MXC_CCM_DCVR_ULV_OFFSET 22 +#define MXC_CCM_DCVR_LLV_MASK (0x3FF << 12) +#define MXC_CCM_DCVR_LLV_OFFSET 12 +#define MXC_CCM_DCVR_ELV_MASK (0x3FF << 2) +#define MXC_CCM_DCVR_ELV_OFFSET 2 + +#define MXC_CCM_PDR2_MST2_PDF_MASK (0x3F << 7) +#define MXC_CCM_PDR2_MST2_PDF_OFFSET 7 +#define MXC_CCM_PDR2_MST1_PDF_MASK 0x3F +#define MXC_CCM_PDR2_MST1_PDF_OFFSET 0 + +#define MXC_CCM_COSR_CLKOSEL_MASK 0x0F +#define MXC_CCM_COSR_CLKOSEL_OFFSET 0 +#define MXC_CCM_COSR_CLKOUTDIV_MASK (0x07 << 6) +#define MXC_CCM_COSR_CLKOUTDIV_OFFSET 6 +#define MXC_CCM_COSR_CLKOEN (1 << 9) + +/* + * PMCR0 register offsets + */ +#define MXC_CCM_PMCR0_LBFL_OFFSET 20 +#define MXC_CCM_PMCR0_DFSUP0_OFFSET 30 +#define MXC_CCM_PMCR0_DFSUP1_OFFSET 31 + +#endif /* __ARCH_ARM_MACH_MX3_CRM_REGS_H__ */ diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h new file mode 100644 index 000000000..bd9393280 --- /dev/null +++ b/arch/arm/mach-imx/devices-imx21.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "devices/devices-common.h" + +extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data; +#define imx21_add_imx21_hcd(pdata) \ + imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata) + +extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data; +#define imx21_add_imx2_wdt() \ + imx_add_imx2_wdt(&imx21_imx2_wdt_data) + +extern const struct imx_imx_fb_data imx21_imx_fb_data; +#define imx21_add_imx_fb(pdata) \ + imx_add_imx_fb(&imx21_imx_fb_data, pdata) + +extern const struct imx_imx_i2c_data imx21_imx_i2c_data; +#define imx21_add_imx_i2c(pdata) \ + imx_add_imx_i2c(&imx21_imx_i2c_data, pdata) + +extern const struct imx_imx_keypad_data imx21_imx_keypad_data; +#define imx21_add_imx_keypad(pdata) \ + imx_add_imx_keypad(&imx21_imx_keypad_data, pdata) + +extern const struct imx_imx_ssi_data imx21_imx_ssi_data[]; +#define imx21_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata) + +extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[]; +#define imx21_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata) +#define imx21_add_imx_uart0(pdata) imx21_add_imx_uart(0, pdata) +#define imx21_add_imx_uart1(pdata) imx21_add_imx_uart(1, pdata) +#define imx21_add_imx_uart2(pdata) imx21_add_imx_uart(2, pdata) +#define imx21_add_imx_uart3(pdata) imx21_add_imx_uart(3, pdata) + +extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[]; +#define imx21_add_mxc_mmc(id, pdata) \ + imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata) + +extern const struct imx_mxc_nand_data imx21_mxc_nand_data; +#define imx21_add_mxc_nand(pdata) \ + imx_add_mxc_nand(&imx21_mxc_nand_data, pdata) + +extern const struct imx_mxc_w1_data imx21_mxc_w1_data; +#define imx21_add_mxc_w1() \ + imx_add_mxc_w1(&imx21_mxc_w1_data) + +extern const struct imx_spi_imx_data imx21_cspi_data[]; +#define imx21_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx21_cspi_data[id], pdata) +#define imx21_add_spi_imx0(pdata) imx21_add_cspi(0, pdata) +#define imx21_add_spi_imx1(pdata) imx21_add_cspi(1, pdata) diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h new file mode 100644 index 000000000..130962519 --- /dev/null +++ b/arch/arm/mach-imx/devices-imx27.h @@ -0,0 +1,89 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "devices/devices-common.h" + +extern const struct imx_fec_data imx27_fec_data; +#define imx27_add_fec(pdata) \ + imx_add_fec(&imx27_fec_data, pdata) + +extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data; +#define imx27_add_fsl_usb2_udc(pdata) \ + imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata) + +extern const struct imx_imx27_coda_data imx27_coda_data; +#define imx27_add_coda() \ + imx_add_imx27_coda(&imx27_coda_data) + +extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data; +#define imx27_add_imx2_wdt() \ + imx_add_imx2_wdt(&imx27_imx2_wdt_data) + +extern const struct imx_imx_fb_data imx27_imx_fb_data; +#define imx27_add_imx_fb(pdata) \ + imx_add_imx_fb(&imx27_imx_fb_data, pdata) + +extern const struct imx_imx_i2c_data imx27_imx_i2c_data[]; +#define imx27_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata) + +extern const struct imx_imx_keypad_data imx27_imx_keypad_data; +#define imx27_add_imx_keypad(pdata) \ + imx_add_imx_keypad(&imx27_imx_keypad_data, pdata) + +extern const struct imx_imx_ssi_data imx27_imx_ssi_data[]; +#define imx27_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata) + +extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[]; +#define imx27_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata) +#define imx27_add_imx_uart0(pdata) imx27_add_imx_uart(0, pdata) +#define imx27_add_imx_uart1(pdata) imx27_add_imx_uart(1, pdata) +#define imx27_add_imx_uart2(pdata) imx27_add_imx_uart(2, pdata) +#define imx27_add_imx_uart3(pdata) imx27_add_imx_uart(3, pdata) +#define imx27_add_imx_uart4(pdata) imx27_add_imx_uart(4, pdata) +#define imx27_add_imx_uart5(pdata) imx27_add_imx_uart(5, pdata) + +extern const struct imx_mx2_camera_data imx27_mx2_camera_data; +#define imx27_add_mx2_camera(pdata) \ + imx_add_mx2_camera(&imx27_mx2_camera_data, pdata) + +extern const struct imx_mx2_emma_data imx27_mx2_emmaprp_data; +#define imx27_add_mx2_emmaprp() \ + imx_add_mx2_emmaprp(&imx27_mx2_emmaprp_data) + +extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data; +#define imx27_add_mxc_ehci_otg(pdata) \ + imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata) +extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[]; +#define imx27_add_mxc_ehci_hs(id, pdata) \ + imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata) + +extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[]; +#define imx27_add_mxc_mmc(id, pdata) \ + imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata) + +extern const struct imx_mxc_nand_data imx27_mxc_nand_data; +#define imx27_add_mxc_nand(pdata) \ + imx_add_mxc_nand(&imx27_mxc_nand_data, pdata) + +extern const struct imx_mxc_w1_data imx27_mxc_w1_data; +#define imx27_add_mxc_w1() \ + imx_add_mxc_w1(&imx27_mxc_w1_data) + +extern const struct imx_spi_imx_data imx27_cspi_data[]; +#define imx27_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx27_cspi_data[id], pdata) +#define imx27_add_spi_imx0(pdata) imx27_add_cspi(0, pdata) +#define imx27_add_spi_imx1(pdata) imx27_add_cspi(1, pdata) +#define imx27_add_spi_imx2(pdata) imx27_add_cspi(2, pdata) + +extern const struct imx_pata_imx_data imx27_pata_imx_data; +#define imx27_add_pata_imx() \ + imx_add_pata_imx(&imx27_pata_imx_data) diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h new file mode 100644 index 000000000..e8d1611bb --- /dev/null +++ b/arch/arm/mach-imx/devices-imx31.h @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "devices/devices-common.h" + +extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data; +#define imx31_add_fsl_usb2_udc(pdata) \ + imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata) + +extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data; +#define imx31_add_imx2_wdt() \ + imx_add_imx2_wdt(&imx31_imx2_wdt_data) + +extern const struct imx_imx_i2c_data imx31_imx_i2c_data[]; +#define imx31_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata) +#define imx31_add_imx_i2c0(pdata) imx31_add_imx_i2c(0, pdata) +#define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata) +#define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata) + +extern const struct imx_imx_keypad_data imx31_imx_keypad_data; +#define imx31_add_imx_keypad(pdata) \ + imx_add_imx_keypad(&imx31_imx_keypad_data, pdata) + +extern const struct imx_imx_ssi_data imx31_imx_ssi_data[]; +#define imx31_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata) + +extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[]; +#define imx31_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata) +#define imx31_add_imx_uart0(pdata) imx31_add_imx_uart(0, pdata) +#define imx31_add_imx_uart1(pdata) imx31_add_imx_uart(1, pdata) +#define imx31_add_imx_uart2(pdata) imx31_add_imx_uart(2, pdata) +#define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata) +#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata) + +extern const struct imx_ipu_core_data imx31_ipu_core_data; +#define imx31_add_ipu_core() \ + imx_add_ipu_core(&imx31_ipu_core_data) +#define imx31_alloc_mx3_camera(pdata) \ + imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata) +#define imx31_add_mx3_sdc_fb(pdata) \ + imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata) + +extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data; +#define imx31_add_mxc_ehci_otg(pdata) \ + imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata) +extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[]; +#define imx31_add_mxc_ehci_hs(id, pdata) \ + imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata) + +extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[]; +#define imx31_add_mxc_mmc(id, pdata) \ + imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata) + +extern const struct imx_mxc_nand_data imx31_mxc_nand_data; +#define imx31_add_mxc_nand(pdata) \ + imx_add_mxc_nand(&imx31_mxc_nand_data, pdata) + +extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data; +#define imx31_add_mxc_rtc() \ + imx_add_mxc_rtc(&imx31_mxc_rtc_data) + +extern const struct imx_mxc_w1_data imx31_mxc_w1_data; +#define imx31_add_mxc_w1() \ + imx_add_mxc_w1(&imx31_mxc_w1_data) + +extern const struct imx_spi_imx_data imx31_cspi_data[]; +#define imx31_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx31_cspi_data[id], pdata) +#define imx31_add_spi_imx0(pdata) imx31_add_cspi(0, pdata) +#define imx31_add_spi_imx1(pdata) imx31_add_cspi(1, pdata) +#define imx31_add_spi_imx2(pdata) imx31_add_cspi(2, pdata) + +extern const struct imx_pata_imx_data imx31_pata_imx_data; +#define imx31_add_pata_imx() \ + imx_add_pata_imx(&imx31_pata_imx_data) diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h new file mode 100644 index 000000000..780d82402 --- /dev/null +++ b/arch/arm/mach-imx/devices-imx35.h @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "devices/devices-common.h" + +extern const struct imx_fec_data imx35_fec_data; +#define imx35_add_fec(pdata) \ + imx_add_fec(&imx35_fec_data, pdata) + +extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data; +#define imx35_add_fsl_usb2_udc(pdata) \ + imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata) + +extern const struct imx_flexcan_data imx35_flexcan_data[]; +#define imx35_add_flexcan(id) \ + imx_add_flexcan(&imx35_flexcan_data[id]) +#define imx35_add_flexcan0() imx35_add_flexcan(0) +#define imx35_add_flexcan1() imx35_add_flexcan(1) + +extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data; +#define imx35_add_imx2_wdt() \ + imx_add_imx2_wdt(&imx35_imx2_wdt_data) + +extern const struct imx_imx_i2c_data imx35_imx_i2c_data[]; +#define imx35_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata) +#define imx35_add_imx_i2c0(pdata) imx35_add_imx_i2c(0, pdata) +#define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata) +#define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata) + +extern const struct imx_imx_keypad_data imx35_imx_keypad_data; +#define imx35_add_imx_keypad(pdata) \ + imx_add_imx_keypad(&imx35_imx_keypad_data, pdata) + +extern const struct imx_imx_ssi_data imx35_imx_ssi_data[]; +#define imx35_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata) + +extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[]; +#define imx35_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata) +#define imx35_add_imx_uart0(pdata) imx35_add_imx_uart(0, pdata) +#define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata) +#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata) + +extern const struct imx_ipu_core_data imx35_ipu_core_data; +#define imx35_add_ipu_core() \ + imx_add_ipu_core(&imx35_ipu_core_data) +#define imx35_alloc_mx3_camera(pdata) \ + imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata) +#define imx35_add_mx3_sdc_fb(pdata) \ + imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata) + +extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data; +#define imx35_add_mxc_ehci_otg(pdata) \ + imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata) +extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data; +#define imx35_add_mxc_ehci_hs(pdata) \ + imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata) + +extern const struct imx_mxc_nand_data imx35_mxc_nand_data; +#define imx35_add_mxc_nand(pdata) \ + imx_add_mxc_nand(&imx35_mxc_nand_data, pdata) + +extern const struct imx_mxc_rtc_data imx35_mxc_rtc_data; +#define imx35_add_mxc_rtc() \ + imx_add_mxc_rtc(&imx35_mxc_rtc_data) + +extern const struct imx_mxc_w1_data imx35_mxc_w1_data; +#define imx35_add_mxc_w1() \ + imx_add_mxc_w1(&imx35_mxc_w1_data) + +extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[]; +#define imx35_add_sdhci_esdhc_imx(id, pdata) \ + imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata) + +extern const struct imx_spi_imx_data imx35_cspi_data[]; +#define imx35_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx35_cspi_data[id], pdata) +#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata) +#define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata) + +extern const struct imx_pata_imx_data imx35_pata_imx_data; +#define imx35_add_pata_imx() \ + imx_add_pata_imx(&imx35_pata_imx_data) diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig new file mode 100644 index 000000000..6ffe57267 --- /dev/null +++ b/arch/arm/mach-imx/devices/Kconfig @@ -0,0 +1,70 @@ +config IMX_HAVE_PLATFORM_FEC + bool + default y if SOC_IMX25 || SOC_IMX27 || SOC_IMX35 + +config IMX_HAVE_PLATFORM_FLEXCAN + bool + +config IMX_HAVE_PLATFORM_FSL_USB2_UDC + bool + +config IMX_HAVE_PLATFORM_GPIO_KEYS + bool + +config IMX_HAVE_PLATFORM_IMX21_HCD + bool + +config IMX_HAVE_PLATFORM_IMX27_CODA + bool + default y if SOC_IMX27 + +config IMX_HAVE_PLATFORM_IMX2_WDT + bool + +config IMX_HAVE_PLATFORM_IMX_FB + bool + +config IMX_HAVE_PLATFORM_IMX_I2C + bool + +config IMX_HAVE_PLATFORM_IMX_KEYPAD + bool + +config IMX_HAVE_PLATFORM_PATA_IMX + bool + +config IMX_HAVE_PLATFORM_IMX_SSI + bool + +config IMX_HAVE_PLATFORM_IMX_UART + bool + +config IMX_HAVE_PLATFORM_IPU_CORE + bool + +config IMX_HAVE_PLATFORM_MX2_CAMERA + bool + +config IMX_HAVE_PLATFORM_MX2_EMMA + bool + +config IMX_HAVE_PLATFORM_MXC_EHCI + bool + +config IMX_HAVE_PLATFORM_MXC_MMC + bool + +config IMX_HAVE_PLATFORM_MXC_NAND + bool + +config IMX_HAVE_PLATFORM_MXC_RTC + bool + +config IMX_HAVE_PLATFORM_MXC_W1 + bool + +config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + bool + +config IMX_HAVE_PLATFORM_SPI_IMX + bool diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile new file mode 100644 index 000000000..e44758aaa --- /dev/null +++ b/arch/arm/mach-imx/devices/Makefile @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-y := devices.o + +obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o +obj-y += platform-gpio-mxc.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o +obj-y += platform-imx-dma.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h new file mode 100644 index 000000000..6920e356f --- /dev/null +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -0,0 +1,297 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/platform_data/dma-imx-sdma.h> + +extern struct device mxc_aips_bus; +extern struct device mxc_ahb_bus; + +static inline struct platform_device *imx_add_platform_device_dmamask( + const char *name, int id, + const struct resource *res, unsigned int num_resources, + const void *data, size_t size_data, u64 dmamask) +{ + struct platform_device_info pdevinfo = { + .name = name, + .id = id, + .res = res, + .num_res = num_resources, + .data = data, + .size_data = size_data, + .dma_mask = dmamask, + }; + return platform_device_register_full(&pdevinfo); +} + +static inline struct platform_device *imx_add_platform_device( + const char *name, int id, + const struct resource *res, unsigned int num_resources, + const void *data, size_t size_data) +{ + return imx_add_platform_device_dmamask( + name, id, res, num_resources, data, size_data, 0); +} + +#include <linux/fec.h> +struct imx_fec_data { + const char *devid; + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_fec( + const struct imx_fec_data *data, + const struct fec_platform_data *pdata); + +struct imx_flexcan_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_flexcan( + const struct imx_flexcan_data *data); + +#include <linux/fsl_devices.h> +struct imx_fsl_usb2_udc_data { + const char *devid; + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_fsl_usb2_udc( + const struct imx_fsl_usb2_udc_data *data, + const struct fsl_usb2_platform_data *pdata); + +#include <linux/gpio_keys.h> +struct platform_device *__init imx_add_gpio_keys( + const struct gpio_keys_platform_data *pdata); + +#include <linux/platform_data/usb-mx2.h> +struct imx_imx21_hcd_data { + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx21_hcd( + const struct imx_imx21_hcd_data *data, + const struct mx21_usbh_platform_data *pdata); + +struct imx_imx27_coda_data { + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx27_coda( + const struct imx_imx27_coda_data *data); + +struct imx_imx2_wdt_data { + int id; + resource_size_t iobase; + resource_size_t iosize; +}; +struct platform_device *__init imx_add_imx2_wdt( + const struct imx_imx2_wdt_data *data); + +struct imx_imxdi_rtc_data { + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imxdi_rtc( + const struct imx_imxdi_rtc_data *data); + +#include <linux/platform_data/video-imxfb.h> +struct imx_imx_fb_data { + const char *devid; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx_fb( + const struct imx_imx_fb_data *data, + const struct imx_fb_platform_data *pdata); + +#include <linux/platform_data/i2c-imx.h> +struct imx_imx_i2c_data { + const char *devid; + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx_i2c( + const struct imx_imx_i2c_data *data, + const struct imxi2c_platform_data *pdata); + +#include <linux/input/matrix_keypad.h> +struct imx_imx_keypad_data { + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx_keypad( + const struct imx_imx_keypad_data *data, + const struct matrix_keymap_data *pdata); + +#include <linux/platform_data/asoc-imx-ssi.h> +struct imx_imx_ssi_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; + resource_size_t dmatx0; + resource_size_t dmarx0; + resource_size_t dmatx1; + resource_size_t dmarx1; +}; +struct platform_device *__init imx_add_imx_ssi( + const struct imx_imx_ssi_data *data, + const struct imx_ssi_platform_data *pdata); + +#include <linux/platform_data/serial-imx.h> +struct imx_imx_uart_1irq_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx_uart_1irq( + const struct imx_imx_uart_1irq_data *data, + const struct imxuart_platform_data *pdata); + +#include <linux/platform_data/video-mx3fb.h> +#include <linux/platform_data/media/camera-mx3.h> +struct imx_ipu_core_data { + resource_size_t iobase; + resource_size_t synirq; + resource_size_t errirq; +}; +struct platform_device *__init imx_add_ipu_core( + const struct imx_ipu_core_data *data); +struct platform_device *__init imx_alloc_mx3_camera( + const struct imx_ipu_core_data *data, + const struct mx3_camera_pdata *pdata); +struct platform_device *__init imx_add_mx3_sdc_fb( + const struct imx_ipu_core_data *data, + struct mx3fb_platform_data *pdata); + +#include <linux/platform_data/media/camera-mx2.h> +struct imx_mx2_camera_data { + const char *devid; + resource_size_t iobasecsi; + resource_size_t iosizecsi; + resource_size_t irqcsi; + resource_size_t iobaseemmaprp; + resource_size_t iosizeemmaprp; + resource_size_t irqemmaprp; +}; +struct platform_device *__init imx_add_mx2_camera( + const struct imx_mx2_camera_data *data, + const struct mx2_camera_platform_data *pdata); + + +struct imx_mx2_emma_data { + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_mx2_emmaprp( + const struct imx_mx2_emma_data *data); + +#include <linux/platform_data/usb-ehci-mxc.h> +struct imx_mxc_ehci_data { + int id; + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_mxc_ehci( + const struct imx_mxc_ehci_data *data, + const struct mxc_usbh_platform_data *pdata); + +#include <linux/platform_data/mmc-mxcmmc.h> +struct imx_mxc_mmc_data { + const char *devid; + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; + resource_size_t dmareq; +}; +struct platform_device *__init imx_add_mxc_mmc( + const struct imx_mxc_mmc_data *data, + const struct imxmmc_platform_data *pdata); + +#include <linux/platform_data/mtd-mxc_nand.h> +struct imx_mxc_nand_data { + const char *devid; + /* + * id is traditionally 0, but -1 is more appropriate. We use -1 for new + * machines but don't change existing devices as the nand device usually + * appears in the kernel command line to pass its partitioning. + */ + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t axibase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_mxc_nand( + const struct imx_mxc_nand_data *data, + const struct mxc_nand_platform_data *pdata); + +struct imx_pata_imx_data { + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_pata_imx( + const struct imx_pata_imx_data *data); + +/* mxc_rtc */ +struct imx_mxc_rtc_data { + const char *devid; + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_mxc_rtc( + const struct imx_mxc_rtc_data *data); + +/* mxc_w1 */ +struct imx_mxc_w1_data { + resource_size_t iobase; +}; +struct platform_device *__init imx_add_mxc_w1( + const struct imx_mxc_w1_data *data); + +#include <linux/platform_data/mmc-esdhc-imx.h> +struct imx_sdhci_esdhc_imx_data { + const char *devid; + int id; + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_sdhci_esdhc_imx( + const struct imx_sdhci_esdhc_imx_data *data, + const struct esdhc_platform_data *pdata); + +#include <linux/platform_data/spi-imx.h> +struct imx_spi_imx_data { + const char *devid; + int id; + resource_size_t iobase; + resource_size_t iosize; + int irq; +}; +struct platform_device *__init imx_add_spi_imx( + const struct imx_spi_imx_data *data, + const struct spi_imx_master *pdata); + +struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase, + int irq, int irq_err); +struct platform_device *imx_add_imx_sdma(char *name, + resource_size_t iobase, int irq, struct sdma_platform_data *pdata); diff --git a/arch/arm/mach-imx/devices/devices.c b/arch/arm/mach-imx/devices/devices.c new file mode 100644 index 000000000..300451727 --- /dev/null +++ b/arch/arm/mach-imx/devices/devices.c @@ -0,0 +1,48 @@ +/* + * Copyright 2008 Sascha Hauer, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> + +#include "../common.h" +#include "devices-common.h" + +struct device mxc_aips_bus = { + .init_name = "mxc_aips", +}; + +struct device mxc_ahb_bus = { + .init_name = "mxc_ahb", +}; + +int __init mxc_device_init(void) +{ + int ret; + + ret = device_register(&mxc_aips_bus); + if (ret < 0) + goto done; + + ret = device_register(&mxc_ahb_bus); + +done: + return ret; +} diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c new file mode 100644 index 000000000..b403a4fe2 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-fec.c @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/dma-mapping.h> +#include <asm/sizes.h> + +#include "../hardware.h" +#include "devices-common.h" + +#define imx_fec_data_entry_single(soc, _devid) \ + { \ + .devid = _devid, \ + .iobase = soc ## _FEC_BASE_ADDR, \ + .irq = soc ## _INT_FEC, \ + } + +#ifdef CONFIG_SOC_IMX27 +const struct imx_fec_data imx27_fec_data __initconst = + imx_fec_data_entry_single(MX27, "imx27-fec"); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX35 +/* i.mx35 has the i.mx27 type fec */ +const struct imx_fec_data imx35_fec_data __initconst = + imx_fec_data_entry_single(MX35, "imx27-fec"); +#endif + +struct platform_device *__init imx_add_fec( + const struct imx_fec_data *data, + const struct fec_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device_dmamask(data->devid, 0, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/mach-imx/devices/platform-flexcan.c b/arch/arm/mach-imx/devices/platform-flexcan.c new file mode 100644 index 000000000..8a1a2fc4c --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-flexcan.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size) \ + { \ + .id = _id, \ + .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_CAN ## _hwid, \ + } + +#define imx_flexcan_data_entry(soc, _id, _hwid, _size) \ + [_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX35 +const struct imx_flexcan_data imx35_flexcan_data[] __initconst = { +#define imx35_flexcan_data_entry(_id, _hwid) \ + imx_flexcan_data_entry(MX35, _id, _hwid, SZ_16K) + imx35_flexcan_data_entry(0, 1), + imx35_flexcan_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_flexcan( + const struct imx_flexcan_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("flexcan", data->id, + res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c new file mode 100644 index 000000000..25e1de6f3 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/dma-mapping.h> + +#include "../hardware.h" +#include "devices-common.h" + +#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \ + { \ + .devid = _devid, \ + .iobase = soc ## _USB_OTG_BASE_ADDR, \ + .irq = soc ## _INT_USB_OTG, \ + } + +#ifdef CONFIG_SOC_IMX27 +const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst = + imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27"); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst = + imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27"); +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst = + imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27"); +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_fsl_usb2_udc( + const struct imx_fsl_usb2_udc_data *data, + const struct fsl_usb2_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask(data->devid, -1, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/mach-imx/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c new file mode 100644 index 000000000..cd1fe69d8 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-gpio-mxc.c @@ -0,0 +1,33 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "devices-common.h" +#include "../common.h" + +struct platform_device *__init mxc_register_gpio(char *name, int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, { + .start = irq_high, + .end = irq_high, + .flags = IORESOURCE_IRQ, + }, + }; + + return platform_device_register_resndata(&mxc_aips_bus, + name, id, res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/mach-imx/devices/platform-gpio_keys.c b/arch/arm/mach-imx/devices/platform-gpio_keys.c new file mode 100644 index 000000000..486282539 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-gpio_keys.c @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ +#include <asm/sizes.h> + +#include "../hardware.h" +#include "devices-common.h" + +struct platform_device *__init imx_add_gpio_keys( + const struct gpio_keys_platform_data *pdata) +{ + return imx_add_platform_device("gpio-keys", -1, NULL, + 0, pdata, sizeof(*pdata)); +} diff --git a/arch/arm/mach-imx/devices/platform-imx-dma.c b/arch/arm/mach-imx/devices/platform-imx-dma.c new file mode 100644 index 000000000..ccdb5dc4d --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-imx-dma.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "devices-common.h" + +struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name, + resource_size_t iobase, int irq, int irq_err) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, { + .start = irq_err, + .end = irq_err, + .flags = IORESOURCE_IRQ, + }, + }; + + return platform_device_register_resndata(&mxc_ahb_bus, + name, -1, res, ARRAY_SIZE(res), NULL, 0); +} + +struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name, + resource_size_t iobase, int irq, struct sdma_platform_data *pdata) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return platform_device_register_resndata(&mxc_ahb_bus, name, + -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c new file mode 100644 index 000000000..aa0027225 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/dma-mapping.h> + +#include "../hardware.h" +#include "devices-common.h" + +#define imx_imx_fb_data_entry_single(soc, _devid, _size) \ + { \ + .devid = _devid, \ + .iobase = soc ## _LCDC_BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_LCDC, \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_fb_data imx21_imx_fb_data __initconst = + imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_fb_data imx27_imx_fb_data __initconst = + imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +struct platform_device *__init imx_add_imx_fb( + const struct imx_imx_fb_data *data, + const struct imx_fb_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask(data->devid, 0, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c new file mode 100644 index 000000000..9822bedb5 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) \ + { \ + .devid = _devid, \ + .id = _id, \ + .iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_I2C ## _hwid, \ + } + +#define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size) \ + [_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = + imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { +#define imx27_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX27, "imx21-i2c", _id, _hwid, SZ_4K) + imx27_imx_i2c_data_entry(0, 1), + imx27_imx_i2c_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = { +#define imx31_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX31, "imx21-i2c", _id, _hwid, SZ_4K) + imx31_imx_i2c_data_entry(0, 1), + imx31_imx_i2c_data_entry(1, 2), + imx31_imx_i2c_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { +#define imx35_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX35, "imx21-i2c", _id, _hwid, SZ_4K) + imx35_imx_i2c_data_entry(0, 1), + imx35_imx_i2c_data_entry(1, 2), + imx35_imx_i2c_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_imx_i2c( + const struct imx_imx_i2c_data *data, + const struct imxi2c_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device(data->devid, data->id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/mach-imx/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c new file mode 100644 index 000000000..479e4d70d --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-imx-keypad.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_imx_keypad_data_entry_single(soc, _size) \ + { \ + .iobase = soc ## _KPP_BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_KPP, \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst = + imx_imx_keypad_data_entry_single(MX21, SZ_16); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst = + imx_imx_keypad_data_entry_single(MX27, SZ_16); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst = + imx_imx_keypad_data_entry_single(MX31, SZ_16); +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst = + imx_imx_keypad_data_entry_single(MX35, SZ_16); +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_imx_keypad( + const struct imx_imx_keypad_data *data, + const struct matrix_keymap_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx-keypad", -1, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/mach-imx/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c new file mode 100644 index 000000000..6f0e94eb2 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-imx-ssi.c @@ -0,0 +1,89 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _SSI ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_SSI ## _hwid, \ + .dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0, \ + .dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0, \ + .dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1, \ + .dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1, \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = { +#define imx21_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K) + imx21_imx_ssi_data_entry(0, 1), + imx21_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = { +#define imx27_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_imx_ssi_data_entry(0, 1), + imx27_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = { +#define imx31_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K) + imx31_imx_ssi_data_entry(0, 1), + imx31_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = { +#define imx35_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K) + imx35_imx_ssi_data_entry(0, 1), + imx35_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_imx_ssi( + const struct imx_imx_ssi_data *data, + const struct imx_ssi_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, +#define DMARES(_name) { \ + .name = #_name, \ + .start = data->dma ## _name, \ + .end = data->dma ## _name, \ + .flags = IORESOURCE_DMA, \ +} + DMARES(tx0), + DMARES(rx0), + DMARES(tx1), + DMARES(rx1), + }; + + return imx_add_platform_device("imx-ssi", data->id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c new file mode 100644 index 000000000..e3c89e9ca --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-imx-uart.c @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irqrx = soc ## _INT_UART ## _hwid ## RX, \ + .irqtx = soc ## _INT_UART ## _hwid ## TX, \ + .irqrts = soc ## _INT_UART ## _hwid ## RTS, \ + } + +#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_UART ## _hwid, \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = { +#define imx21_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K) + imx21_imx_uart_data_entry(0, 1), + imx21_imx_uart_data_entry(1, 2), + imx21_imx_uart_data_entry(2, 3), + imx21_imx_uart_data_entry(3, 4), +}; +#endif + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = { +#define imx27_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_imx_uart_data_entry(0, 1), + imx27_imx_uart_data_entry(1, 2), + imx27_imx_uart_data_entry(2, 3), + imx27_imx_uart_data_entry(3, 4), + imx27_imx_uart_data_entry(4, 5), + imx27_imx_uart_data_entry(5, 6), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = { +#define imx31_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K) + imx31_imx_uart_data_entry(0, 1), + imx31_imx_uart_data_entry(1, 2), + imx31_imx_uart_data_entry(2, 3), + imx31_imx_uart_data_entry(3, 4), + imx31_imx_uart_data_entry(4, 5), +}; +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = { +#define imx35_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K) + imx35_imx_uart_data_entry(0, 1), + imx35_imx_uart_data_entry(1, 2), + imx35_imx_uart_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_imx_uart_1irq( + const struct imx_imx_uart_1irq_data *data, + const struct imxuart_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + /* i.mx21 type uart runs on all i.mx except i.mx1 */ + return imx_add_platform_device("imx21-uart", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/mach-imx/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c new file mode 100644 index 000000000..8c134c8d7 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-imx2-wdt.c @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> + +#include "../hardware.h" +#include "devices-common.h" + +#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) \ + { \ + .id = _id, \ + .iobase = soc ## _WDOG ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + } +#define imx_imx2_wdt_data_entry(soc, _id, _hwid, _size) \ + [_id] = imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst = + imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst = + imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst = + imx_imx2_wdt_data_entry_single(MX31, 0, , SZ_16K); +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst = + imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K); +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_imx2_wdt( + const struct imx_imx2_wdt_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, + }; + return imx_add_platform_device("imx2-wdt", data->id, + res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/mach-imx/devices/platform-imx21-hcd.c b/arch/arm/mach-imx/devices/platform-imx21-hcd.c new file mode 100644 index 000000000..30c81616a --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-imx21-hcd.c @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_imx21_hcd_data_entry_single(soc) \ + { \ + .iobase = soc ## _USBOTG_BASE_ADDR, \ + .irq = soc ## _INT_USBHOST, \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst = + imx_imx21_hcd_data_entry_single(MX21); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +struct platform_device *__init imx_add_imx21_hcd( + const struct imx_imx21_hcd_data *data, + const struct mx21_usbh_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("imx21-hcd", 0, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/mach-imx/devices/platform-imx27-coda.c b/arch/arm/mach-imx/devices/platform-imx27-coda.c new file mode 100644 index 000000000..25bebc29e --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-imx27-coda.c @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012 Vista Silicon + * Javier Martin <javier.martin@vista-silicon.com> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include "../hardware.h" +#include "devices-common.h" + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx27_coda_data imx27_coda_data __initconst = { + .iobase = MX27_VPU_BASE_ADDR, + .iosize = SZ_512, + .irq = MX27_INT_VPU, +}; +#endif + +struct platform_device *__init imx_add_imx27_coda( + const struct imx_imx27_coda_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("coda-imx27", 0, res, 2, NULL, + 0, DMA_BIT_MASK(32)); +} diff --git a/arch/arm/mach-imx/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c new file mode 100644 index 000000000..6bd7c3f37 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-ipu-core.c @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2011 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/dma-mapping.h> + +#include "../hardware.h" +#include "devices-common.h" + +#define imx_ipu_core_entry_single(soc) \ +{ \ + .iobase = soc ## _IPU_CTRL_BASE_ADDR, \ + .synirq = soc ## _INT_IPU_SYN, \ + .errirq = soc ## _INT_IPU_ERR, \ +} + +#ifdef CONFIG_SOC_IMX31 +const struct imx_ipu_core_data imx31_ipu_core_data __initconst = + imx_ipu_core_entry_single(MX31); +#endif + +#ifdef CONFIG_SOC_IMX35 +const struct imx_ipu_core_data imx35_ipu_core_data __initconst = + imx_ipu_core_entry_single(MX35); +#endif + +static struct platform_device *imx_ipu_coredev __initdata; + +struct platform_device *__init imx_add_ipu_core( + const struct imx_ipu_core_data *data) +{ + /* The resource order is important! */ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + 0x5f, + .flags = IORESOURCE_MEM, + }, { + .start = data->iobase + 0x88, + .end = data->iobase + 0xb3, + .flags = IORESOURCE_MEM, + }, { + .start = data->synirq, + .end = data->synirq, + .flags = IORESOURCE_IRQ, + }, { + .start = data->errirq, + .end = data->errirq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1, + res, ARRAY_SIZE(res), NULL, 0); +} + +struct platform_device *__init imx_alloc_mx3_camera( + const struct imx_ipu_core_data *data, + const struct mx3_camera_pdata *pdata) +{ + struct resource res[] = { + { + .start = data->iobase + 0x60, + .end = data->iobase + 0x87, + .flags = IORESOURCE_MEM, + }, + }; + int ret = -ENOMEM; + struct platform_device *pdev; + + if (IS_ERR_OR_NULL(imx_ipu_coredev)) + return ERR_PTR(-ENODEV); + + pdev = platform_device_alloc("mx3-camera", 0); + if (!pdev) + return ERR_PTR(-ENOMEM); + + pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL); + if (!pdev->dev.dma_mask) + goto err; + + *pdev->dev.dma_mask = DMA_BIT_MASK(32); + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); + if (ret) + goto err; + + if (pdata) { + struct mx3_camera_pdata *copied_pdata; + + ret = platform_device_add_data(pdev, pdata, sizeof(*pdata)); + if (ret) { +err: + kfree(pdev->dev.dma_mask); + platform_device_put(pdev); + return ERR_PTR(-ENODEV); + } + copied_pdata = dev_get_platdata(&pdev->dev); + copied_pdata->dma_dev = &imx_ipu_coredev->dev; + } + + return pdev; +} + +struct platform_device *__init imx_add_mx3_sdc_fb( + const struct imx_ipu_core_data *data, + struct mx3fb_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase + 0xb4, + .end = data->iobase + 0x1bf, + .flags = IORESOURCE_MEM, + }, + }; + + if (IS_ERR_OR_NULL(imx_ipu_coredev)) + return ERR_PTR(-ENODEV); + + pdata->dma_dev = &imx_ipu_coredev->dev; + + return imx_add_platform_device_dmamask("mx3_sdc_fb", -1, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata), + DMA_BIT_MASK(32)); +} diff --git a/arch/arm/mach-imx/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c new file mode 100644 index 000000000..4c377c332 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-mx2-camera.c @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_mx2_camera_data_entry_single(soc, _devid) \ + { \ + .devid = _devid, \ + .iobasecsi = soc ## _CSI_BASE_ADDR, \ + .iosizecsi = SZ_4K, \ + .irqcsi = soc ## _INT_CSI, \ + } +#define imx_mx2_camera_data_entry_single_emma(soc, _devid) \ + { \ + .devid = _devid, \ + .iobasecsi = soc ## _CSI_BASE_ADDR, \ + .iosizecsi = SZ_32, \ + .irqcsi = soc ## _INT_CSI, \ + .iobaseemmaprp = soc ## _EMMAPRP_BASE_ADDR, \ + .iosizeemmaprp = SZ_32, \ + .irqemmaprp = soc ## _INT_EMMAPRP, \ + } + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst = + imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera"); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +struct platform_device *__init imx_add_mx2_camera( + const struct imx_mx2_camera_data *data, + const struct mx2_camera_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobasecsi, + .end = data->iobasecsi + data->iosizecsi - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irqcsi, + .end = data->irqcsi, + .flags = IORESOURCE_IRQ, + }, { + .start = data->iobaseemmaprp, + .end = data->iobaseemmaprp + data->iosizeemmaprp - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irqemmaprp, + .end = data->irqemmaprp, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask(data->devid, 0, + res, data->iobaseemmaprp ? 4 : 2, + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} + diff --git a/arch/arm/mach-imx/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c new file mode 100644 index 000000000..0dc065182 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-mx2-emma.c @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_mx2_emmaprp_data_entry_single(soc) \ + { \ + .iobase = soc ## _EMMAPRP_BASE_ADDR, \ + .iosize = SZ_256, \ + .irq = soc ## _INT_EMMAPRP, \ + } + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst = + imx_mx2_emmaprp_data_entry_single(MX27); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +struct platform_device *__init imx_add_mx2_emmaprp( + const struct imx_mx2_emma_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("m2m-emmaprp", 0, + res, 2, NULL, 0, DMA_BIT_MASK(32)); +} diff --git a/arch/arm/mach-imx/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c new file mode 100644 index 000000000..4537abd2a --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-mxc-ehci.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/dma-mapping.h> + +#include "../hardware.h" +#include "devices-common.h" + +#define imx_mxc_ehci_data_entry_single(soc, _id, hs) \ + { \ + .id = _id, \ + .iobase = soc ## _USB_ ## hs ## _BASE_ADDR, \ + .irq = soc ## _INT_USB_ ## hs, \ + } + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst = + imx_mxc_ehci_data_entry_single(MX27, 0, OTG); +const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst = { + imx_mxc_ehci_data_entry_single(MX27, 1, HS1), + imx_mxc_ehci_data_entry_single(MX27, 2, HS2), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst = + imx_mxc_ehci_data_entry_single(MX31, 0, OTG); +const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst = { + imx_mxc_ehci_data_entry_single(MX31, 1, HS1), + imx_mxc_ehci_data_entry_single(MX31, 2, HS2), +}; +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst = + imx_mxc_ehci_data_entry_single(MX35, 0, OTG); +const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst = + imx_mxc_ehci_data_entry_single(MX35, 1, HS); +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_mxc_ehci( + const struct imx_mxc_ehci_data *data, + const struct mxc_usbh_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("mxc-ehci", data->id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/mach-imx/devices/platform-mxc-mmc.c b/arch/arm/mach-imx/devices/platform-mxc-mmc.c new file mode 100644 index 000000000..b8203c760 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-mxc-mmc.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/dma-mapping.h> + +#include "../hardware.h" +#include "devices-common.h" + +#define imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) \ + { \ + .devid = _devid, \ + .id = _id, \ + .iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_SDHC ## _hwid, \ + .dmareq = soc ## _DMA_REQ_SDHC ## _hwid, \ + } +#define imx_mxc_mmc_data_entry(soc, _devid, _id, _hwid, _size) \ + [_id] = imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX21 +const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = { +#define imx21_mxc_mmc_data_entry(_id, _hwid) \ + imx_mxc_mmc_data_entry(MX21, "imx21-mmc", _id, _hwid, SZ_4K) + imx21_mxc_mmc_data_entry(0, 1), + imx21_mxc_mmc_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = { +#define imx27_mxc_mmc_data_entry(_id, _hwid) \ + imx_mxc_mmc_data_entry(MX27, "imx21-mmc", _id, _hwid, SZ_4K) + imx27_mxc_mmc_data_entry(0, 1), + imx27_mxc_mmc_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = { +#define imx31_mxc_mmc_data_entry(_id, _hwid) \ + imx_mxc_mmc_data_entry(MX31, "imx31-mmc", _id, _hwid, SZ_16K) + imx31_mxc_mmc_data_entry(0, 1), + imx31_mxc_mmc_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX31 */ + +struct platform_device *__init imx_add_mxc_mmc( + const struct imx_mxc_mmc_data *data, + const struct imxmmc_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, { + .start = data->dmareq, + .end = data->dmareq, + .flags = IORESOURCE_DMA, + }, + }; + return imx_add_platform_device_dmamask(data->devid, data->id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/mach-imx/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c new file mode 100644 index 000000000..676df4920 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-mxc_nand.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> + +#include "../hardware.h" +#include "devices-common.h" + +#define imx_mxc_nand_data_entry_single(soc, _devid, _size) \ + { \ + .devid = _devid, \ + .iobase = soc ## _NFC_BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_NFC \ + } + +#define imx_mxc_nandv3_data_entry_single(soc, _devid, _size) \ + { \ + .devid = _devid, \ + .id = -1, \ + .iobase = soc ## _NFC_BASE_ADDR, \ + .iosize = _size, \ + .axibase = soc ## _NFC_AXI_BASE_ADDR, \ + .irq = soc ## _INT_NFC \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX31, "imx27-nand", SZ_4K); +#endif + +#ifdef CONFIG_SOC_IMX35 +const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K); +#endif + +struct platform_device *__init imx_add_mxc_nand( + const struct imx_mxc_nand_data *data, + const struct mxc_nand_platform_data *pdata) +{ + /* AXI has to come first, that's how the mxc_nand driver expect it */ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, { + .start = data->axibase, + .end = data->axibase + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + }; + return imx_add_platform_device(data->devid, data->id, + res, ARRAY_SIZE(res) - !data->axibase, + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/mach-imx/devices/platform-mxc_rtc.c b/arch/arm/mach-imx/devices/platform-mxc_rtc.c new file mode 100644 index 000000000..c7fffaadf --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-mxc_rtc.c @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2010-2011 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_mxc_rtc_data_entry_single(soc, _devid) \ + { \ + .devid = _devid, \ + .iobase = soc ## _RTC_BASE_ADDR, \ + .irq = soc ## _INT_RTC, \ + } + +#ifdef CONFIG_SOC_IMX31 +const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst = + imx_mxc_rtc_data_entry_single(MX31, "imx21-rtc"); +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst = + imx_mxc_rtc_data_entry_single(MX35, "imx21-rtc"); +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_mxc_rtc( + const struct imx_mxc_rtc_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device(data->devid, -1, + res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/mach-imx/devices/platform-mxc_w1.c b/arch/arm/mach-imx/devices/platform-mxc_w1.c new file mode 100644 index 000000000..88c18b720 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-mxc_w1.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_mxc_w1_data_entry_single(soc) \ + { \ + .iobase = soc ## _OWIRE_BASE_ADDR, \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst = + imx_mxc_w1_data_entry_single(MX21); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst = + imx_mxc_w1_data_entry_single(MX27); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst = + imx_mxc_w1_data_entry_single(MX31); +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst = + imx_mxc_w1_data_entry_single(MX35); +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_mxc_w1( + const struct imx_mxc_w1_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + }; + + return imx_add_platform_device("mxc_w1", 0, + res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/mach-imx/devices/platform-pata_imx.c b/arch/arm/mach-imx/devices/platform-pata_imx.c new file mode 100644 index 000000000..1c7f895a6 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-pata_imx.c @@ -0,0 +1,49 @@ +/* + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_pata_imx_data_entry_single(soc, _size) \ + { \ + .iobase = soc ## _ATA_BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_ATA, \ + } + +#ifdef CONFIG_SOC_IMX27 +const struct imx_pata_imx_data imx27_pata_imx_data __initconst = + imx_pata_imx_data_entry_single(MX27, SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_pata_imx_data imx31_pata_imx_data __initconst = + imx_pata_imx_data_entry_single(MX31, SZ_16K); +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_pata_imx_data imx35_pata_imx_data __initconst = + imx_pata_imx_data_entry_single(MX35, SZ_16K); +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_pata_imx( + const struct imx_pata_imx_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device("pata_imx", -1, + res, ARRAY_SIZE(res), NULL, 0); +} + diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c new file mode 100644 index 000000000..466c9ccc6 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <linux/platform_data/mmc-esdhc-imx.h> + +#include "../hardware.h" +#include "devices-common.h" + +#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \ + { \ + .devid = _devid, \ + .id = _id, \ + .iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \ + .irq = soc ## _INT_ESDHC ## hwid, \ + } + +#define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid) \ + [id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid) + +#ifdef CONFIG_SOC_IMX35 +const struct imx_sdhci_esdhc_imx_data +imx35_sdhci_esdhc_imx_data[] __initconst = { +#define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid) \ + imx_sdhci_esdhc_imx_data_entry(MX35, "sdhci-esdhc-imx35", _id, _hwid) + imx35_sdhci_esdhc_imx_data_entry(0, 1), + imx35_sdhci_esdhc_imx_data_entry(1, 2), + imx35_sdhci_esdhc_imx_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX35 */ + +static const struct esdhc_platform_data default_esdhc_pdata __initconst = { + .wp_type = ESDHC_WP_NONE, + .cd_type = ESDHC_CD_NONE, +}; + +struct platform_device *__init imx_add_sdhci_esdhc_imx( + const struct imx_sdhci_esdhc_imx_data *data, + const struct esdhc_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + /* + * If machine does not provide pdata, use the default one + * which means no WP/CD support + */ + if (!pdata) + pdata = &default_esdhc_pdata; + + return imx_add_platform_device_dmamask(data->devid, data->id, res, + ARRAY_SIZE(res), pdata, sizeof(*pdata), + DMA_BIT_MASK(32)); +} diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c new file mode 100644 index 000000000..d93c446c9 --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-spi_imx.c @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \ + { \ + .devid = _devid, \ + .id = _id, \ + .iobase = soc ## _ ## type ## hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_ ## type ## hwid, \ + } + +#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \ + [id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size) + +#ifdef CONFIG_SOC_IMX21 +const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { +#define imx21_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K) + imx21_cspi_data_entry(0, 1), + imx21_cspi_data_entry(1, 2), +}; +#endif + +#ifdef CONFIG_SOC_IMX27 +const struct imx_spi_imx_data imx27_cspi_data[] __initconst = { +#define imx27_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K) + imx27_cspi_data_entry(0, 1), + imx27_cspi_data_entry(1, 2), + imx27_cspi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_spi_imx_data imx31_cspi_data[] __initconst = { +#define imx31_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K) + imx31_cspi_data_entry(0, 1), + imx31_cspi_data_entry(1, 2), + imx31_cspi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_spi_imx_data imx35_cspi_data[] __initconst = { +#define imx35_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K) + imx35_cspi_data_entry(0, 1), + imx35_cspi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_spi_imx( + const struct imx_spi_imx_data *data, + const struct spi_imx_master *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device(data->devid, data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c new file mode 100644 index 000000000..c56974346 --- /dev/null +++ b/arch/arm/mach-imx/ehci-imx27.c @@ -0,0 +1,83 @@ +/* + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/platform_data/usb-ehci-mxc.h> + +#include "ehci.h" +#include "hardware.h" + +#define USBCTRL_OTGBASE_OFFSET 0x600 + +#define MX27_OTG_SIC_SHIFT 29 +#define MX27_OTG_SIC_MASK (0x3 << MX27_OTG_SIC_SHIFT) +#define MX27_OTG_PM_BIT (1 << 24) + +#define MX27_H2_SIC_SHIFT 21 +#define MX27_H2_SIC_MASK (0x3 << MX27_H2_SIC_SHIFT) +#define MX27_H2_PM_BIT (1 << 16) +#define MX27_H2_DT_BIT (1 << 5) + +#define MX27_H1_SIC_SHIFT 13 +#define MX27_H1_SIC_MASK (0x3 << MX27_H1_SIC_SHIFT) +#define MX27_H1_PM_BIT (1 << 8) +#define MX27_H1_DT_BIT (1 << 4) + +int mx27_initialize_usb_hw(int port, unsigned int flags) +{ + unsigned int v; + + v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX27_OTG_SIC_MASK | MX27_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_OTG_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX27_OTG_PM_BIT; + break; + case 1: /* H1 port */ + v &= ~(MX27_H1_SIC_MASK | MX27_H1_PM_BIT | MX27_H1_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H1_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX27_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX27_H1_DT_BIT; + + break; + case 2: /* H2 port */ + v &= ~(MX27_H2_SIC_MASK | MX27_H2_PM_BIT | MX27_H2_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H2_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX27_H2_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX27_H2_DT_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + return 0; +} + diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c new file mode 100644 index 000000000..bede21d9b --- /dev/null +++ b/arch/arm/mach-imx/ehci-imx31.c @@ -0,0 +1,83 @@ +/* + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/platform_data/usb-ehci-mxc.h> + +#include "ehci.h" +#include "hardware.h" + +#define USBCTRL_OTGBASE_OFFSET 0x600 + +#define MX31_OTG_SIC_SHIFT 29 +#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT) +#define MX31_OTG_PM_BIT (1 << 24) + +#define MX31_H2_SIC_SHIFT 21 +#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT) +#define MX31_H2_PM_BIT (1 << 16) +#define MX31_H2_DT_BIT (1 << 5) + +#define MX31_H1_SIC_SHIFT 13 +#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT) +#define MX31_H1_PM_BIT (1 << 8) +#define MX31_H1_DT_BIT (1 << 4) + +int mx31_initialize_usb_hw(int port, unsigned int flags) +{ + unsigned int v; + + v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H1_DT_BIT; + + break; + case 2: /* H2 port */ + v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H2_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H2_DT_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + return 0; +} diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c new file mode 100644 index 000000000..f424a5437 --- /dev/null +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -0,0 +1,98 @@ +/* + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/platform_data/usb-ehci-mxc.h> + +#include "ehci.h" +#include "hardware.h" + +#define USBCTRL_OTGBASE_OFFSET 0x600 + +#define MX35_OTG_SIC_SHIFT 29 +#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT) +#define MX35_OTG_PM_BIT (1 << 24) +#define MX35_OTG_PP_BIT (1 << 11) +#define MX35_OTG_OCPOL_BIT (1 << 3) + +#define MX35_H1_SIC_SHIFT 21 +#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) +#define MX35_H1_PP_BIT (1 << 18) +#define MX35_H1_PM_BIT (1 << 16) +#define MX35_H1_IPPUE_UP_BIT (1 << 7) +#define MX35_H1_IPPUE_DOWN_BIT (1 << 6) +#define MX35_H1_TLL_BIT (1 << 5) +#define MX35_H1_USBTE_BIT (1 << 4) +#define MX35_H1_OCPOL_BIT (1 << 2) + +int mx35_initialize_usb_hw(int port, unsigned int flags) +{ + unsigned int v; + + v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT | + MX35_OTG_OCPOL_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_OTG_PM_BIT; + + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX35_OTG_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX35_OTG_OCPOL_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT | + MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT | + MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_H1_PM_BIT; + + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX35_H1_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX35_H1_OCPOL_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX35_H1_TLL_BIT; + + if (flags & MXC_EHCI_INTERNAL_PHY) + v |= MX35_H1_USBTE_BIT; + + if (flags & MXC_EHCI_IPPUE_DOWN) + v |= MX35_H1_IPPUE_DOWN_BIT; + + if (flags & MXC_EHCI_IPPUE_UP) + v |= MX35_H1_IPPUE_UP_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + return 0; +} diff --git a/arch/arm/mach-imx/ehci.h b/arch/arm/mach-imx/ehci.h new file mode 100644 index 000000000..b7ad6175f --- /dev/null +++ b/arch/arm/mach-imx/ehci.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __MACH_IMX_EHCI_H +#define __MACH_IMX_EHCI_H + +/* values for portsc field */ +#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) +#define MXC_EHCI_FORCE_FS (1 << 24) +#define MXC_EHCI_UTMI_8BIT (0 << 28) +#define MXC_EHCI_UTMI_16BIT (1 << 28) +#define MXC_EHCI_SERIAL (1 << 29) +#define MXC_EHCI_MODE_UTMI (0 << 30) +#define MXC_EHCI_MODE_PHILIPS (1 << 30) +#define MXC_EHCI_MODE_ULPI (2 << 30) +#define MXC_EHCI_MODE_SERIAL (3 << 30) + +/* values for flags field */ +#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) +#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) +#define MXC_EHCI_INTERFACE_MASK (0xf) + +#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) +#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6) +#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7) +#define MXC_EHCI_TTL_ENABLED (1 << 8) + +#define MXC_EHCI_INTERNAL_PHY (1 << 9) +#define MXC_EHCI_IPPUE_DOWN (1 << 10) +#define MXC_EHCI_IPPUE_UP (1 << 11) +#define MXC_EHCI_WAKEUP_ENABLED (1 << 12) +#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13) + +#define MXC_USBCTRL_OFFSET 0 +#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 +#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc +#define MXC_USBH2CTRL_OFFSET 0x14 + +int mx25_initialize_usb_hw(int port, unsigned int flags); +int mx31_initialize_usb_hw(int port, unsigned int flags); +int mx35_initialize_usb_hw(int port, unsigned int flags); +int mx27_initialize_usb_hw(int port, unsigned int flags); + +#endif /* __MACH_IMX_EHCI_H */ diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c new file mode 100644 index 000000000..e11159d40 --- /dev/null +++ b/arch/arm/mach-imx/gpc.c @@ -0,0 +1,291 @@ +/* + * Copyright 2011-2013 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/irqchip/arm-gic.h> +#include "common.h" +#include "hardware.h" + +#define GPC_CNTR 0x0 +#define GPC_IMR1 0x008 +#define GPC_PGC_CPU_PDN 0x2a0 +#define GPC_PGC_CPU_PUPSCR 0x2a4 +#define GPC_PGC_CPU_PDNSCR 0x2a8 +#define GPC_PGC_SW2ISO_SHIFT 0x8 +#define GPC_PGC_SW_SHIFT 0x0 + +#define GPC_CNTR_L2_PGE_SHIFT 22 + +#define IMR_NUM 4 +#define GPC_MAX_IRQS (IMR_NUM * 32) + +static void __iomem *gpc_base; +static u32 gpc_wake_irqs[IMR_NUM]; +static u32 gpc_saved_imrs[IMR_NUM]; + +void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw) +{ + writel_relaxed((sw2iso << GPC_PGC_SW2ISO_SHIFT) | + (sw << GPC_PGC_SW_SHIFT), gpc_base + GPC_PGC_CPU_PUPSCR); +} + +void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw) +{ + writel_relaxed((sw2iso << GPC_PGC_SW2ISO_SHIFT) | + (sw << GPC_PGC_SW_SHIFT), gpc_base + GPC_PGC_CPU_PDNSCR); +} + +void imx_gpc_set_arm_power_in_lpm(bool power_off) +{ + writel_relaxed(power_off, gpc_base + GPC_PGC_CPU_PDN); +} + +void imx_gpc_set_l2_mem_power_in_lpm(bool power_off) +{ + u32 val; + + val = readl_relaxed(gpc_base + GPC_CNTR); + val &= ~(1 << GPC_CNTR_L2_PGE_SHIFT); + if (power_off) + val |= 1 << GPC_CNTR_L2_PGE_SHIFT; + writel_relaxed(val, gpc_base + GPC_CNTR); +} + +void imx_gpc_pre_suspend(bool arm_power_off) +{ + void __iomem *reg_imr1 = gpc_base + GPC_IMR1; + int i; + + /* Tell GPC to power off ARM core when suspend */ + if (arm_power_off) + imx_gpc_set_arm_power_in_lpm(arm_power_off); + + for (i = 0; i < IMR_NUM; i++) { + gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4); + writel_relaxed(~gpc_wake_irqs[i], reg_imr1 + i * 4); + } +} + +void imx_gpc_post_resume(void) +{ + void __iomem *reg_imr1 = gpc_base + GPC_IMR1; + int i; + + /* Keep ARM core powered on for other low-power modes */ + imx_gpc_set_arm_power_in_lpm(false); + + for (i = 0; i < IMR_NUM; i++) + writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4); +} + +static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on) +{ + unsigned int idx = d->hwirq / 32; + u32 mask; + + mask = 1 << d->hwirq % 32; + gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask : + gpc_wake_irqs[idx] & ~mask; + + /* + * Do *not* call into the parent, as the GIC doesn't have any + * wake-up facility... + */ + return 0; +} + +void imx_gpc_mask_all(void) +{ + void __iomem *reg_imr1 = gpc_base + GPC_IMR1; + int i; + + for (i = 0; i < IMR_NUM; i++) { + gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4); + writel_relaxed(~0, reg_imr1 + i * 4); + } + +} + +void imx_gpc_restore_all(void) +{ + void __iomem *reg_imr1 = gpc_base + GPC_IMR1; + int i; + + for (i = 0; i < IMR_NUM; i++) + writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4); +} + +void imx_gpc_hwirq_unmask(unsigned int hwirq) +{ + void __iomem *reg; + u32 val; + + reg = gpc_base + GPC_IMR1 + hwirq / 32 * 4; + val = readl_relaxed(reg); + val &= ~(1 << hwirq % 32); + writel_relaxed(val, reg); +} + +void imx_gpc_hwirq_mask(unsigned int hwirq) +{ + void __iomem *reg; + u32 val; + + reg = gpc_base + GPC_IMR1 + hwirq / 32 * 4; + val = readl_relaxed(reg); + val |= 1 << (hwirq % 32); + writel_relaxed(val, reg); +} + +static void imx_gpc_irq_unmask(struct irq_data *d) +{ + imx_gpc_hwirq_unmask(d->hwirq); + irq_chip_unmask_parent(d); +} + +static void imx_gpc_irq_mask(struct irq_data *d) +{ + imx_gpc_hwirq_mask(d->hwirq); + irq_chip_mask_parent(d); +} + +static struct irq_chip imx_gpc_chip = { + .name = "GPC", + .irq_eoi = irq_chip_eoi_parent, + .irq_mask = imx_gpc_irq_mask, + .irq_unmask = imx_gpc_irq_unmask, + .irq_retrigger = irq_chip_retrigger_hierarchy, + .irq_set_wake = imx_gpc_irq_set_wake, + .irq_set_type = irq_chip_set_type_parent, +#ifdef CONFIG_SMP + .irq_set_affinity = irq_chip_set_affinity_parent, +#endif +}; + +static int imx_gpc_domain_translate(struct irq_domain *d, + struct irq_fwspec *fwspec, + unsigned long *hwirq, + unsigned int *type) +{ + if (is_of_node(fwspec->fwnode)) { + if (fwspec->param_count != 3) + return -EINVAL; + + /* No PPI should point to this domain */ + if (fwspec->param[0] != 0) + return -EINVAL; + + *hwirq = fwspec->param[1]; + *type = fwspec->param[2]; + return 0; + } + + return -EINVAL; +} + +static int imx_gpc_domain_alloc(struct irq_domain *domain, + unsigned int irq, + unsigned int nr_irqs, void *data) +{ + struct irq_fwspec *fwspec = data; + struct irq_fwspec parent_fwspec; + irq_hw_number_t hwirq; + int i; + + if (fwspec->param_count != 3) + return -EINVAL; /* Not GIC compliant */ + if (fwspec->param[0] != 0) + return -EINVAL; /* No PPI should point to this domain */ + + hwirq = fwspec->param[1]; + if (hwirq >= GPC_MAX_IRQS) + return -EINVAL; /* Can't deal with this */ + + for (i = 0; i < nr_irqs; i++) + irq_domain_set_hwirq_and_chip(domain, irq + i, hwirq + i, + &imx_gpc_chip, NULL); + + parent_fwspec = *fwspec; + parent_fwspec.fwnode = domain->parent->fwnode; + return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, + &parent_fwspec); +} + +static const struct irq_domain_ops imx_gpc_domain_ops = { + .translate = imx_gpc_domain_translate, + .alloc = imx_gpc_domain_alloc, + .free = irq_domain_free_irqs_common, +}; + +static int __init imx_gpc_init(struct device_node *node, + struct device_node *parent) +{ + struct irq_domain *parent_domain, *domain; + int i; + + if (!parent) { + pr_err("%pOF: no parent, giving up\n", node); + return -ENODEV; + } + + parent_domain = irq_find_host(parent); + if (!parent_domain) { + pr_err("%pOF: unable to obtain parent domain\n", node); + return -ENXIO; + } + + gpc_base = of_iomap(node, 0); + if (WARN_ON(!gpc_base)) + return -ENOMEM; + + domain = irq_domain_add_hierarchy(parent_domain, 0, GPC_MAX_IRQS, + node, &imx_gpc_domain_ops, + NULL); + if (!domain) { + iounmap(gpc_base); + return -ENOMEM; + } + + /* Initially mask all interrupts */ + for (i = 0; i < IMR_NUM; i++) + writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4); + + /* + * Clear the OF_POPULATED flag set in of_irq_init so that + * later the GPC power domain driver will not be skipped. + */ + of_node_clear_flag(node, OF_POPULATED); + + return 0; +} +IRQCHIP_DECLARE(imx_gpc, "fsl,imx6q-gpc", imx_gpc_init); + +void __init imx_gpc_check_dt(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc"); + if (WARN_ON(!np)) + return; + + if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) { + pr_warn("Outdated DT detected, suspend/resume will NOT work\n"); + + /* map GPC, so that at least CPUidle and WARs keep working */ + gpc_base = of_iomap(np, 0); + } +} diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h new file mode 100644 index 000000000..90e10cbd8 --- /dev/null +++ b/arch/arm/mach-imx/hardware.h @@ -0,0 +1,127 @@ +/* + * Copyright 2004-2007, 2014 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_HARDWARE_H__ +#define __ASM_ARCH_MXC_HARDWARE_H__ + +#ifndef __ASSEMBLY__ +#include <asm/io.h> +#include <soc/imx/revision.h> +#endif +#include <asm/sizes.h> + +#define addr_in_module(addr, mod) \ + ((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE) + +#define IMX_IO_P2V_MODULE(addr, module) \ + (((addr) - module ## _BASE_ADDR) < module ## _SIZE ? \ + (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0) + +/* + * This is rather complicated for humans and ugly to verify, but for a machine + * it's OK. Still more as it is usually only applied to constants. The upsides + * on using this approach are: + * + * - same mapping on all i.MX machines + * - works for assembler, too + * - no need to nurture #defines for virtual addresses + * + * The downside it, it's hard to verify (but I have a script for that). + * + * Obviously this needs to be injective for each SoC. In general it maps the + * whole address space to [0xf4000000, 0xf5ffffff]. So [0xf6000000,0xfeffffff] + * is free for per-machine use (e.g. KZM_ARM11_01 uses 64MiB there). + * + * It applies the following mappings for the different SoCs: + * + * mx1: + * IO 0x00200000+0x100000 -> 0xf4000000+0x100000 + * mx21: + * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000 + * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000 + * X_MEMC 0xdf000000+0x004000 -> 0xf5f00000+0x004000 + * mx25: + * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 + * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 + * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 + * mx27: + * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000 + * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000 + * X_MEMC 0xd8000000+0x100000 -> 0xf5c00000+0x100000 + * mx31: + * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 + * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 + * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 + * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000 + * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 + * mx35: + * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 + * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 + * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 + * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000 + * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 + * mx51: + * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000 + * IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000 + * DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000 + * SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000 + * AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000 + * AIPS2 0x83f00000+0x100000 -> 0xf5300000+0x100000 + * mx53: + * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000 + * DEBUG 0x40000000+0x100000 -> 0xf5000000+0x100000 + * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 + * AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000 + * AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000 + * mx6q: + * SCU 0x00a00000+0x004000 -> 0xf4000000+0x004000 + * CCM 0x020c4000+0x004000 -> 0xf42c4000+0x004000 + * ANATOP 0x020c8000+0x004000 -> 0xf42c8000+0x004000 + * UART4 0x021f0000+0x004000 -> 0xf42f0000+0x004000 + */ +#define IMX_IO_P2V(x) ( \ + (((x) & 0x80000000) >> 7) | \ + (0xf4000000 + \ + (((x) & 0x50000000) >> 6) + \ + (((x) & 0x0b000000) >> 4) + \ + (((x) & 0x000fffff)))) + +#define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x)) + +#include "mxc.h" + +#include "mx3x.h" +#include "mx31.h" +#include "mx35.h" +#include "mx2x.h" +#include "mx21.h" +#include "mx27.h" + +#define imx_map_entry(soc, name, _type) { \ + .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ + .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \ + .length = soc ## _ ## name ## _SIZE, \ + .type = _type, \ +} + +/* There's an off-by-one between the gpio bank number and the gpiochip */ +/* range e.g. GPIO_1_5 is gpio 5 under linux */ +#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr)) + +#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S new file mode 100644 index 000000000..6c28d28b3 --- /dev/null +++ b/arch/arm/mach-imx/headsmp.S @@ -0,0 +1,32 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> + +diag_reg_offset: + .word g_diag_reg - . + + .macro set_diag_reg + adr r0, diag_reg_offset + ldr r1, [r0] + add r1, r1, r0 @ r1 = physical &g_diag_reg + ldr r0, [r1] + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + .endm + +ENTRY(v7_secondary_startup) +ARM_BE8(setend be) @ go BE8 if entered LE + set_diag_reg + b secondary_startup +ENDPROC(v7_secondary_startup) diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c new file mode 100644 index 000000000..b35e99cc5 --- /dev/null +++ b/arch/arm/mach-imx/hotplug.c @@ -0,0 +1,70 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/errno.h> +#include <linux/jiffies.h> +#include <asm/cp15.h> +#include <asm/proc-fns.h> + +#include "common.h" + +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + asm volatile( + "mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, %3\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0), "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void imx_cpu_die(unsigned int cpu) +{ + cpu_enter_lowpower(); + /* + * We use the cpu jumping argument register to sync with + * imx_cpu_kill() which is running on cpu0 and waiting for + * the register being cleared to kill the cpu. + */ + imx_set_cpu_arg(cpu, ~0); + + while (1) + cpu_do_idle(); +} + +int imx_cpu_kill(unsigned int cpu) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(50); + + while (imx_get_cpu_arg(cpu) == 0) + if (time_after(jiffies, timeout)) + return 0; + imx_enable_cpu(cpu, false); + imx_set_cpu_arg(cpu, 0); + return 1; +} diff --git a/arch/arm/mach-imx/iim.h b/arch/arm/mach-imx/iim.h new file mode 100644 index 000000000..315bffada --- /dev/null +++ b/arch/arm/mach-imx/iim.h @@ -0,0 +1,77 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_IIM_H__ +#define __ASM_ARCH_MXC_IIM_H__ + +/* Register offsets */ +#define MXC_IIMSTAT 0x0000 +#define MXC_IIMSTATM 0x0004 +#define MXC_IIMERR 0x0008 +#define MXC_IIMEMASK 0x000C +#define MXC_IIMFCTL 0x0010 +#define MXC_IIMUA 0x0014 +#define MXC_IIMLA 0x0018 +#define MXC_IIMSDAT 0x001C +#define MXC_IIMPREV 0x0020 +#define MXC_IIMSREV 0x0024 +#define MXC_IIMPRG_P 0x0028 +#define MXC_IIMSCS0 0x002C +#define MXC_IIMSCS1 0x0030 +#define MXC_IIMSCS2 0x0034 +#define MXC_IIMSCS3 0x0038 +#define MXC_IIMFBAC0 0x0800 +#define MXC_IIMJAC 0x0804 +#define MXC_IIMHWV1 0x0808 +#define MXC_IIMHWV2 0x080C +#define MXC_IIMHAB0 0x0810 +#define MXC_IIMHAB1 0x0814 +/* Definitions for i.MX27 TO2 */ +#define MXC_IIMMAC 0x0814 +#define MXC_IIMPREV_FUSE 0x0818 +#define MXC_IIMSREV_FUSE 0x081C +#define MXC_IIMSJC_CHALL_0 0x0820 +#define MXC_IIMSJC_CHALL_7 0x083C +#define MXC_IIMFB0UC17 0x0840 +#define MXC_IIMFB0UC255 0x0BFC +#define MXC_IIMFBAC1 0x0C00 +/* Definitions for i.MX27 TO2 */ +#define MXC_IIMSUID 0x0C04 +#define MXC_IIMKEY0 0x0C04 +#define MXC_IIMKEY20 0x0C54 +#define MXC_IIMSJC_RESP_0 0x0C58 +#define MXC_IIMSJC_RESP_7 0x0C74 +#define MXC_IIMFB1UC30 0x0C78 +#define MXC_IIMFB1UC255 0x0FFC + +/* Bit definitions */ + +#define MXC_IIMHWV1_WLOCK (0x1 << 7) +#define MXC_IIMHWV1_MCU_ENDIAN (0x1 << 6) +#define MXC_IIMHWV1_DSP_ENDIAN (0x1 << 5) +#define MXC_IIMHWV1_BOOT_INT (0x1 << 4) +#define MXC_IIMHWV1_SCC_DISABLE (0x1 << 3) +#define MXC_IIMHWV1_HANTRO_DISABLE (0x1 << 2) +#define MXC_IIMHWV1_MEMSTICK_DIS (0x1 << 1) + +#define MXC_IIMHWV2_WLOCK (0x1 << 7) +#define MXC_IIMHWV2_BP_SDMA (0x1 << 6) +#define MXC_IIMHWV2_SCM_DCM (0x1 << 5) + +#endif /* __ASM_ARCH_MXC_IIM_H__ */ diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c new file mode 100644 index 000000000..a754b8a48 --- /dev/null +++ b/arch/arm/mach-imx/imx27-dt.c @@ -0,0 +1,32 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/irq.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "common.h" +#include "mx27.h" + +static const char * const imx27_dt_board_compat[] __initconst = { + "fsl,imx27", + NULL +}; + +DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .init_late = imx27_pm_init, + .dt_compat = imx27_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c new file mode 100644 index 000000000..9d9640aaf --- /dev/null +++ b/arch/arm/mach-imx/imx31-dt.c @@ -0,0 +1,25 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <asm/mach/arch.h> +#include "common.h" + +static const char * const imx31_dt_board_compat[] __initconst = { + "fsl,imx31", + NULL +}; + +DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .dt_compat = imx31_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c new file mode 100644 index 000000000..99bb63ded --- /dev/null +++ b/arch/arm/mach-imx/imx35-dt.c @@ -0,0 +1,35 @@ +/* + * Copyright 2012 Steffen Trumtrar, Pengutronix + * + * based on imx27-dt.c + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/clk-provider.h> +#include <linux/clocksource.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/hardware/cache-l2x0.h> +#include "common.h" +#include "mx35.h" + +static const char * const imx35_dt_board_compat[] __initconst = { + "fsl,imx35", + NULL +}; + +DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .map_io = mx35_map_io, + .init_early = imx35_init_early, + .init_irq = mx35_init_irq, + .dt_compat = imx35_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c new file mode 100644 index 000000000..3982e91b2 --- /dev/null +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -0,0 +1,174 @@ +/* + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/kernel.h> + +#include "hardware.h" +#include "iomux-mx3.h" + +/* + * IOMUX register (base) addresses + */ +#define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR) +#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000) +#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004) +#define IOMUXGPR (IOMUX_BASE + 0x008) +#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C) +#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154) + +static DEFINE_SPINLOCK(gpio_mux_lock); + +#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3) + +static DECLARE_BITMAP(mxc_pin_alloc_map, NB_PORTS * 32); +/* + * set the mode for a IOMUX pin. + */ +void mxc_iomux_mode(unsigned int pin_mode) +{ + u32 field; + u32 l; + u32 mode; + void __iomem *reg; + + reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK); + field = pin_mode & 0x3; + mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT; + + spin_lock(&gpio_mux_lock); + + l = imx_readl(reg); + l &= ~(0xff << (field * 8)); + l |= mode << (field * 8); + imx_writel(l, reg); + + spin_unlock(&gpio_mux_lock); +} + +/* + * This function configures the pad value for a IOMUX pin. + */ +void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) +{ + u32 field, l; + void __iomem *reg; + + pin &= IOMUX_PADNUM_MASK; + reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4; + field = (pin + 2) % 3; + + pr_debug("%s: reg offset = 0x%x, field = %d\n", + __func__, (pin + 2) / 3, field); + + spin_lock(&gpio_mux_lock); + + l = imx_readl(reg); + l &= ~(0x1ff << (field * 10)); + l |= config << (field * 10); + imx_writel(l, reg); + + spin_unlock(&gpio_mux_lock); +} + +/* + * allocs a single pin: + * - reserves the pin so that it is not claimed by another driver + * - setups the iomux according to the configuration + */ +int mxc_iomux_alloc_pin(unsigned int pin, const char *label) +{ + unsigned pad = pin & IOMUX_PADNUM_MASK; + + if (pad >= (PIN_MAX + 1)) { + printk(KERN_ERR "mxc_iomux: Attempt to request nonexistent pin %u for \"%s\"\n", + pad, label ? label : "?"); + return -EINVAL; + } + + if (test_and_set_bit(pad, mxc_pin_alloc_map)) { + printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n", + pad, label ? label : "?"); + return -EBUSY; + } + mxc_iomux_mode(pin); + + return 0; +} + +int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, + const char *label) +{ + const unsigned int *p = pin_list; + int i; + int ret = -EINVAL; + + for (i = 0; i < count; i++) { + ret = mxc_iomux_alloc_pin(*p, label); + if (ret) + goto setup_error; + p++; + } + return 0; + +setup_error: + mxc_iomux_release_multiple_pins(pin_list, i); + return ret; +} + +void mxc_iomux_release_pin(unsigned int pin) +{ + unsigned pad = pin & IOMUX_PADNUM_MASK; + + if (pad < (PIN_MAX + 1)) + clear_bit(pad, mxc_pin_alloc_map); +} + +void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count) +{ + const unsigned int *p = pin_list; + int i; + + for (i = 0; i < count; i++) { + mxc_iomux_release_pin(*p); + p++; + } +} + +/* + * This function enables/disables the general purpose function for a particular + * signal. + */ +void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en) +{ + u32 l; + + spin_lock(&gpio_mux_lock); + l = imx_readl(IOMUXGPR); + if (en) + l |= gp; + else + l &= ~gp; + + imx_writel(l, IOMUXGPR); + spin_unlock(&gpio_mux_lock); +} diff --git a/arch/arm/mach-imx/iomux-mx21.h b/arch/arm/mach-imx/iomux-mx21.h new file mode 100644 index 000000000..a70cffceb --- /dev/null +++ b/arch/arm/mach-imx/iomux-mx21.h @@ -0,0 +1,122 @@ +/* + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX21_H__ +#define __MACH_IOMUX_MX21_H__ + +#include "iomux-mx2x.h" +#include "iomux-v1.h" + +/* Primary GPIO pin functions */ + +#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22) +#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25) +#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5) +#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6) +#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7) +#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8) +#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9) +#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10) +#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11) +#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12) +#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13) +#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16) +#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17) +#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18) +#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19) +#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0) +#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1) +#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2) +#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1) +#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3) +#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7) +#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8) +#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9) +#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10) +#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11) +#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12) +#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13) +#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14) +#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16) + +/* Alternate GPIO pin functions */ + +#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5) +#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6) +#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7) +#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8) +#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9) +#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10) +#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11) +#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12) +#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13) +#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14) +#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15) +#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16) +#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17) +#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18) +#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19) +#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20) +#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21) +#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22) +#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23) +#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29) +#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30) + +/* AIN GPIO pin functions */ + +#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) +#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21) +#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22) +#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23) +#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24) +#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8) +#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0) +#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1) +#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2) +#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3) +#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4) +#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5) + +/* BIN GPIO pin functions */ + +#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) +#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27) + +/* CIN GPIO pin functions */ + +#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26) + +/* AOUT GPIO pin functions */ + +#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29) +#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19) +#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20) +#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25) +#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26) +#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9) +#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6) +#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7) +#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8) +#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9) +#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10) +#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11) +#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12) +#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13) +#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14) + +#endif /* ifndef __MACH_IOMUX_MX21_H__ */ diff --git a/arch/arm/mach-imx/iomux-mx27.h b/arch/arm/mach-imx/iomux-mx27.h new file mode 100644 index 000000000..218e99e89 --- /dev/null +++ b/arch/arm/mach-imx/iomux-mx27.h @@ -0,0 +1,205 @@ +/* + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX27_H__ +#define __MACH_IOMUX_MX27_H__ + +#include "iomux-mx2x.h" +#include "iomux-v1.h" + +/* Primary GPIO pin functions */ + +#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0) +#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1) +#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2) +#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3) +#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4) +#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22) +#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25) +#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) +#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6) +#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7) +#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8) +#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) +#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10) +#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) +#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12) +#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13) +#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16) +#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17) +#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18) +#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19) +#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0) +#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1) +#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2) +#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3) +#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4) +#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5) +#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6) +#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7) +#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8) +#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9) +#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10) +#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11) +#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12) +#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13) +#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14) +#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15) +#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16) +#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0) +#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1) +#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2) +#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24) +#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25) +#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1) +#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3) +#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7) +#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8) +#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9) +#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10) +#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11) +#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12) +#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13) +#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14) +#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16) +#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17) +#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18) +#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19) +#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20) +#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23) + +/* Alternate GPIO pin functions */ + +#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4) +#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5) +#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6) +#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7) +#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8) +#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9) +#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10) +#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11) +#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12) +#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13) +#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18) +#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19) +#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20) +#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21) +#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8) +#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24) +#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25) +#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26) +#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27) +#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1) +#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6) +#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7) +#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9) +#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2) +#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3) +#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4) +#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5) +#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8) +#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10) +#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11) +#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12) +#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13) +#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14) +#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15) +#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16) +#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1) +#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3) +#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5) +#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7) +#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8) +#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9) +#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10) +#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11) +#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12) +#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13) +#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14) +#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15) +#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16) +#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17) +#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18) +#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19) +#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20) +#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22) +#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23) + +/* AIN GPIO pin functions */ + +#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) +#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15) +#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0) +#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1) +#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2) +#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3) +#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9) +#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16) +#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27) +#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23) + +/* BIN GPIO pin functions */ + +#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) + +/* CIN GPIO pin functions */ + +#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2) +#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3) +#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4) +#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5) +#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6) +#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7) +#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8) +#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9) +#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10) +#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11) +#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12) +#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13) +#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14) +#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15) +#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16) +#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23) +#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27) +/* LCDC_TESTx on PBxx omitted, because it's not clear what they do */ + +/* AOUT GPIO pin functions */ + +#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14) +#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4) +#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5) +#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6) +#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7) +#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10) +#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11) +#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12) +#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13) +#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14) +#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15) + +/* BOUT GPIO pin functions */ + +#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17) +#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18) +#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19) +#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28) +#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29) +#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30) +#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31) + +#endif /* __MACH_IOMUX_MX27_H__ */ diff --git a/arch/arm/mach-imx/iomux-mx2x.h b/arch/arm/mach-imx/iomux-mx2x.h new file mode 100644 index 000000000..7a9b20abd --- /dev/null +++ b/arch/arm/mach-imx/iomux-mx2x.h @@ -0,0 +1,230 @@ +/* + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX2x_H__ +#define __MACH_IOMUX_MX2x_H__ + +/* Primary GPIO pin functions */ + +#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5) +#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6) +#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7) +#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8) +#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9) +#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10) +#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11) +#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12) +#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13) +#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14) +#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) +#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) +#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17) +#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18) +#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19) +#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20) +#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21) +#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22) +#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23) +#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24) +#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25) +#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26) +#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27) +#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28) +#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29) +#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30) +#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31) +#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4) +#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5) +#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6) +#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7) +#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8) +#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9) +#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10) +#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11) +#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12) +#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13) +#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14) +#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15) +#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16) +#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17) +#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18) +#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19) +#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20) +#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21) +#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23) +#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24) +#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26) +#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27) +#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28) +#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29) +#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30) +#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31) +#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14) +#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15) +#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20) +#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21) +#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22) +#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23) +#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24) +#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25) +#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26) +#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27) +#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28) +#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29) +#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30) +#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31) +#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) +#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) +#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19) +#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20) +#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21) +#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22) +#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 23) +#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24) +#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) +#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) +#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) +#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) +#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) +#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30) +#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31) +#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3) +#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4) +#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5) +#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6) +#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7) +#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8) +#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9) +#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10) +#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11) +#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12) +#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13) +#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14) +#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15) +#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16) +#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17) +#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18) +#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19) +#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20) +#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21) +#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22) +#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23) +#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0) +#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2) +#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4) +#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5) +#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6) +#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15) +#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21) +#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22) + +/* Alternate GPIO pin functions */ + +#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26) +#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28) +#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29) +#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31) +#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28) +#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29) +#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30) +#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31) +#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19) +#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20) +#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21) +#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22) +#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23) +#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24) +#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26) +#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0) +#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1) +#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2) +#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3) +#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4) +#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6) +#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7) +#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16) +#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18) +#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21) +#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22) +#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23) + +/* AIN GPIO pin functions */ + +#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6) +#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7) +#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8) +#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) +#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11) +#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13) +#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15) +#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) +#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19) +#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21) +#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22) +#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24) +#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25) +#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26) +#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27) +#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6) +#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7) +#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8) +#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9) +#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25) +#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26) +#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27) +#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28) +#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29) +#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30) +#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31) +#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5) +#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6) +#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7) +#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8) +#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9) +#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10) +#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11) +#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12) +#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13) +#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5) + +/* BIN GPIO pin functions */ + +#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5) + +/* CIN GPIO pin functions */ + +#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14) +#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15) +#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16) +#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17) +#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18) +#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19) +#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20) +#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21) +#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30) +#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5) + +/* AOUT GPIO pin functions */ + +#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29) +#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31) +#define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8) +#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15) +#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21) + +#endif /* ifndef __MACH_IOMUX_MX2x_H__ */ diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h new file mode 100644 index 000000000..368667b32 --- /dev/null +++ b/arch/arm/mach-imx/iomux-mx3.h @@ -0,0 +1,719 @@ +/* + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX3_H__ +#define __MACH_IOMUX_MX3_H__ + +#include <linux/types.h> +/* + * various IOMUX output functions + */ + +#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */ +#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */ +#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */ +#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */ +#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */ +#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */ +#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */ +#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */ +#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ +#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */ +#define IOMUX_ICONFIG_FUNC 2 /* used as function */ +#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */ +#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */ + +#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO) +#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC) +#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1) +#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2) + +/* + * various IOMUX pad functions + */ +enum iomux_pad_config { + PAD_CTL_NOLOOPBACK = 0x0 << 9, + PAD_CTL_LOOPBACK = 0x1 << 9, + PAD_CTL_PKE_NONE = 0x0 << 8, + PAD_CTL_PKE_ENABLE = 0x1 << 8, + PAD_CTL_PUE_KEEPER = 0x0 << 7, + PAD_CTL_PUE_PUD = 0x1 << 7, + PAD_CTL_100K_PD = 0x0 << 5, + PAD_CTL_100K_PU = 0x1 << 5, + PAD_CTL_47K_PU = 0x2 << 5, + PAD_CTL_22K_PU = 0x3 << 5, + PAD_CTL_HYS_CMOS = 0x0 << 4, + PAD_CTL_HYS_SCHMITZ = 0x1 << 4, + PAD_CTL_ODE_CMOS = 0x0 << 3, + PAD_CTL_ODE_OpenDrain = 0x1 << 3, + PAD_CTL_DRV_NORMAL = 0x0 << 1, + PAD_CTL_DRV_HIGH = 0x1 << 1, + PAD_CTL_DRV_MAX = 0x2 << 1, + PAD_CTL_SRE_SLOW = 0x0 << 0, + PAD_CTL_SRE_FAST = 0x1 << 0 +}; + +/* + * various IOMUX general purpose functions + */ +enum iomux_gp_func { + MUX_PGP_FIRI = 1 << 0, + MUX_DDR_MODE = 1 << 1, + MUX_PGP_CSPI_BB = 1 << 2, + MUX_PGP_ATA_1 = 1 << 3, + MUX_PGP_ATA_2 = 1 << 4, + MUX_PGP_ATA_3 = 1 << 5, + MUX_PGP_ATA_4 = 1 << 6, + MUX_PGP_ATA_5 = 1 << 7, + MUX_PGP_ATA_6 = 1 << 8, + MUX_PGP_ATA_7 = 1 << 9, + MUX_PGP_ATA_8 = 1 << 10, + MUX_PGP_UH2 = 1 << 11, + MUX_SDCTL_CSD0_SEL = 1 << 12, + MUX_SDCTL_CSD1_SEL = 1 << 13, + MUX_CSPI1_UART3 = 1 << 14, + MUX_EXTDMAREQ2_MBX_SEL = 1 << 15, + MUX_TAMPER_DETECT_EN = 1 << 16, + MUX_PGP_USB_4WIRE = 1 << 17, + MUX_PGP_USB_COMMON = 1 << 18, + MUX_SDHC_MEMSTICK1 = 1 << 19, + MUX_SDHC_MEMSTICK2 = 1 << 20, + MUX_PGP_SPLL_BYP = 1 << 21, + MUX_PGP_UPLL_BYP = 1 << 22, + MUX_PGP_MSHC1_CLK_SEL = 1 << 23, + MUX_PGP_MSHC2_CLK_SEL = 1 << 24, + MUX_CSPI3_UART5_SEL = 1 << 25, + MUX_PGP_ATA_9 = 1 << 26, + MUX_PGP_USB_SUSPEND = 1 << 27, + MUX_PGP_USB_OTG_LOOPBACK = 1 << 28, + MUX_PGP_USB_HS1_LOOPBACK = 1 << 29, + MUX_PGP_USB_HS2_LOOPBACK = 1 << 30, + MUX_CLKO_DDR_MODE = 1 << 31, +}; + +/* + * setups a single pin: + * - reserves the pin so that it is not claimed by another driver + * - setups the iomux according to the configuration + * - if the pin is configured as a GPIO, we claim it through kernel gpiolib + */ +int mxc_iomux_alloc_pin(unsigned int pin, const char *label); +/* + * setups multiple pins + * convenient way to call the above function with tables + */ +int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, + const char *label); + +/* + * releases a single pin: + * - make it available for a future use by another driver + * - frees the GPIO if the pin was configured as GPIO + * - DOES NOT reconfigure the IOMUX in its reset state + */ +void mxc_iomux_release_pin(unsigned int pin); +/* + * releases multiple pins + * convenvient way to call the above function with tables + */ +void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count); + +/* + * This function enables/disables the general purpose function for a particular + * signal. + */ +void mxc_iomux_set_gpr(enum iomux_gp_func, bool en); + +/* + * This function only configures the iomux hardware. + * It is called by the setup functions and should not be called directly anymore. + * It is here visible for backward compatibility + */ +void mxc_iomux_mode(unsigned int pin_mode); + +#define IOMUX_PADNUM_MASK 0x1ff +#define IOMUX_GPIONUM_SHIFT 9 +#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT) +#define IOMUX_MODE_SHIFT 17 +#define IOMUX_MODE_MASK (0xff << IOMUX_MODE_SHIFT) + +#define IOMUX_PIN(gpionum, padnum) \ + (((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \ + (padnum & IOMUX_PADNUM_MASK)) + +#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT) + +#define IOMUX_TO_GPIO(iomux_pin) \ + ((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + +/* + * This enumeration is constructed based on the Section + * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated + * value is constructed based on the rules described above. + */ + +enum iomux_pins { + MX31_PIN_TTM_PAD = IOMUX_PIN(0xff, 0), + MX31_PIN_CSPI3_SPI_RDY = IOMUX_PIN(0xff, 1), + MX31_PIN_CSPI3_SCLK = IOMUX_PIN(0xff, 2), + MX31_PIN_CSPI3_MISO = IOMUX_PIN(0xff, 3), + MX31_PIN_CSPI3_MOSI = IOMUX_PIN(0xff, 4), + MX31_PIN_CLKSS = IOMUX_PIN(0xff, 5), + MX31_PIN_CE_CONTROL = IOMUX_PIN(0xff, 6), + MX31_PIN_ATA_RESET_B = IOMUX_PIN(95, 7), + MX31_PIN_ATA_DMACK = IOMUX_PIN(94, 8), + MX31_PIN_ATA_DIOW = IOMUX_PIN(93, 9), + MX31_PIN_ATA_DIOR = IOMUX_PIN(92, 10), + MX31_PIN_ATA_CS1 = IOMUX_PIN(91, 11), + MX31_PIN_ATA_CS0 = IOMUX_PIN(90, 12), + MX31_PIN_SD1_DATA3 = IOMUX_PIN(63, 13), + MX31_PIN_SD1_DATA2 = IOMUX_PIN(62, 14), + MX31_PIN_SD1_DATA1 = IOMUX_PIN(61, 15), + MX31_PIN_SD1_DATA0 = IOMUX_PIN(60, 16), + MX31_PIN_SD1_CLK = IOMUX_PIN(59, 17), + MX31_PIN_SD1_CMD = IOMUX_PIN(58, 18), + MX31_PIN_D3_SPL = IOMUX_PIN(0xff, 19), + MX31_PIN_D3_CLS = IOMUX_PIN(0xff, 20), + MX31_PIN_D3_REV = IOMUX_PIN(0xff, 21), + MX31_PIN_CONTRAST = IOMUX_PIN(0xff, 22), + MX31_PIN_VSYNC3 = IOMUX_PIN(0xff, 23), + MX31_PIN_READ = IOMUX_PIN(0xff, 24), + MX31_PIN_WRITE = IOMUX_PIN(0xff, 25), + MX31_PIN_PAR_RS = IOMUX_PIN(0xff, 26), + MX31_PIN_SER_RS = IOMUX_PIN(89, 27), + MX31_PIN_LCS1 = IOMUX_PIN(88, 28), + MX31_PIN_LCS0 = IOMUX_PIN(87, 29), + MX31_PIN_SD_D_CLK = IOMUX_PIN(86, 30), + MX31_PIN_SD_D_IO = IOMUX_PIN(85, 31), + MX31_PIN_SD_D_I = IOMUX_PIN(84, 32), + MX31_PIN_DRDY0 = IOMUX_PIN(0xff, 33), + MX31_PIN_FPSHIFT = IOMUX_PIN(0xff, 34), + MX31_PIN_HSYNC = IOMUX_PIN(0xff, 35), + MX31_PIN_VSYNC0 = IOMUX_PIN(0xff, 36), + MX31_PIN_LD17 = IOMUX_PIN(0xff, 37), + MX31_PIN_LD16 = IOMUX_PIN(0xff, 38), + MX31_PIN_LD15 = IOMUX_PIN(0xff, 39), + MX31_PIN_LD14 = IOMUX_PIN(0xff, 40), + MX31_PIN_LD13 = IOMUX_PIN(0xff, 41), + MX31_PIN_LD12 = IOMUX_PIN(0xff, 42), + MX31_PIN_LD11 = IOMUX_PIN(0xff, 43), + MX31_PIN_LD10 = IOMUX_PIN(0xff, 44), + MX31_PIN_LD9 = IOMUX_PIN(0xff, 45), + MX31_PIN_LD8 = IOMUX_PIN(0xff, 46), + MX31_PIN_LD7 = IOMUX_PIN(0xff, 47), + MX31_PIN_LD6 = IOMUX_PIN(0xff, 48), + MX31_PIN_LD5 = IOMUX_PIN(0xff, 49), + MX31_PIN_LD4 = IOMUX_PIN(0xff, 50), + MX31_PIN_LD3 = IOMUX_PIN(0xff, 51), + MX31_PIN_LD2 = IOMUX_PIN(0xff, 52), + MX31_PIN_LD1 = IOMUX_PIN(0xff, 53), + MX31_PIN_LD0 = IOMUX_PIN(0xff, 54), + MX31_PIN_USBH2_DATA1 = IOMUX_PIN(0xff, 55), + MX31_PIN_USBH2_DATA0 = IOMUX_PIN(0xff, 56), + MX31_PIN_USBH2_NXT = IOMUX_PIN(0xff, 57), + MX31_PIN_USBH2_STP = IOMUX_PIN(0xff, 58), + MX31_PIN_USBH2_DIR = IOMUX_PIN(0xff, 59), + MX31_PIN_USBH2_CLK = IOMUX_PIN(0xff, 60), + MX31_PIN_USBOTG_DATA7 = IOMUX_PIN(0xff, 61), + MX31_PIN_USBOTG_DATA6 = IOMUX_PIN(0xff, 62), + MX31_PIN_USBOTG_DATA5 = IOMUX_PIN(0xff, 63), + MX31_PIN_USBOTG_DATA4 = IOMUX_PIN(0xff, 64), + MX31_PIN_USBOTG_DATA3 = IOMUX_PIN(0xff, 65), + MX31_PIN_USBOTG_DATA2 = IOMUX_PIN(0xff, 66), + MX31_PIN_USBOTG_DATA1 = IOMUX_PIN(0xff, 67), + MX31_PIN_USBOTG_DATA0 = IOMUX_PIN(0xff, 68), + MX31_PIN_USBOTG_NXT = IOMUX_PIN(0xff, 69), + MX31_PIN_USBOTG_STP = IOMUX_PIN(0xff, 70), + MX31_PIN_USBOTG_DIR = IOMUX_PIN(0xff, 71), + MX31_PIN_USBOTG_CLK = IOMUX_PIN(0xff, 72), + MX31_PIN_USB_BYP = IOMUX_PIN(31, 73), + MX31_PIN_USB_OC = IOMUX_PIN(30, 74), + MX31_PIN_USB_PWR = IOMUX_PIN(29, 75), + MX31_PIN_SJC_MOD = IOMUX_PIN(0xff, 76), + MX31_PIN_DE_B = IOMUX_PIN(0xff, 77), + MX31_PIN_TRSTB = IOMUX_PIN(0xff, 78), + MX31_PIN_TDO = IOMUX_PIN(0xff, 79), + MX31_PIN_TDI = IOMUX_PIN(0xff, 80), + MX31_PIN_TMS = IOMUX_PIN(0xff, 81), + MX31_PIN_TCK = IOMUX_PIN(0xff, 82), + MX31_PIN_RTCK = IOMUX_PIN(0xff, 83), + MX31_PIN_KEY_COL7 = IOMUX_PIN(57, 84), + MX31_PIN_KEY_COL6 = IOMUX_PIN(56, 85), + MX31_PIN_KEY_COL5 = IOMUX_PIN(55, 86), + MX31_PIN_KEY_COL4 = IOMUX_PIN(54, 87), + MX31_PIN_KEY_COL3 = IOMUX_PIN(0xff, 88), + MX31_PIN_KEY_COL2 = IOMUX_PIN(0xff, 89), + MX31_PIN_KEY_COL1 = IOMUX_PIN(0xff, 90), + MX31_PIN_KEY_COL0 = IOMUX_PIN(0xff, 91), + MX31_PIN_KEY_ROW7 = IOMUX_PIN(53, 92), + MX31_PIN_KEY_ROW6 = IOMUX_PIN(52, 93), + MX31_PIN_KEY_ROW5 = IOMUX_PIN(51, 94), + MX31_PIN_KEY_ROW4 = IOMUX_PIN(50, 95), + MX31_PIN_KEY_ROW3 = IOMUX_PIN(0xff, 96), + MX31_PIN_KEY_ROW2 = IOMUX_PIN(0xff, 97), + MX31_PIN_KEY_ROW1 = IOMUX_PIN(0xff, 98), + MX31_PIN_KEY_ROW0 = IOMUX_PIN(0xff, 99), + MX31_PIN_BATT_LINE = IOMUX_PIN(49, 100), + MX31_PIN_CTS2 = IOMUX_PIN(0xff, 101), + MX31_PIN_RTS2 = IOMUX_PIN(0xff, 102), + MX31_PIN_TXD2 = IOMUX_PIN(28, 103), + MX31_PIN_RXD2 = IOMUX_PIN(27, 104), + MX31_PIN_DTR_DCE2 = IOMUX_PIN(48, 105), + MX31_PIN_DCD_DTE1 = IOMUX_PIN(47, 106), + MX31_PIN_RI_DTE1 = IOMUX_PIN(46, 107), + MX31_PIN_DSR_DTE1 = IOMUX_PIN(45, 108), + MX31_PIN_DTR_DTE1 = IOMUX_PIN(44, 109), + MX31_PIN_DCD_DCE1 = IOMUX_PIN(43, 110), + MX31_PIN_RI_DCE1 = IOMUX_PIN(42, 111), + MX31_PIN_DSR_DCE1 = IOMUX_PIN(41, 112), + MX31_PIN_DTR_DCE1 = IOMUX_PIN(40, 113), + MX31_PIN_CTS1 = IOMUX_PIN(39, 114), + MX31_PIN_RTS1 = IOMUX_PIN(38, 115), + MX31_PIN_TXD1 = IOMUX_PIN(37, 116), + MX31_PIN_RXD1 = IOMUX_PIN(36, 117), + MX31_PIN_CSPI2_SPI_RDY = IOMUX_PIN(0xff, 118), + MX31_PIN_CSPI2_SCLK = IOMUX_PIN(0xff, 119), + MX31_PIN_CSPI2_SS2 = IOMUX_PIN(0xff, 120), + MX31_PIN_CSPI2_SS1 = IOMUX_PIN(0xff, 121), + MX31_PIN_CSPI2_SS0 = IOMUX_PIN(0xff, 122), + MX31_PIN_CSPI2_MISO = IOMUX_PIN(0xff, 123), + MX31_PIN_CSPI2_MOSI = IOMUX_PIN(0xff, 124), + MX31_PIN_CSPI1_SPI_RDY = IOMUX_PIN(0xff, 125), + MX31_PIN_CSPI1_SCLK = IOMUX_PIN(0xff, 126), + MX31_PIN_CSPI1_SS2 = IOMUX_PIN(0xff, 127), + MX31_PIN_CSPI1_SS1 = IOMUX_PIN(0xff, 128), + MX31_PIN_CSPI1_SS0 = IOMUX_PIN(0xff, 129), + MX31_PIN_CSPI1_MISO = IOMUX_PIN(0xff, 130), + MX31_PIN_CSPI1_MOSI = IOMUX_PIN(0xff, 131), + MX31_PIN_SFS6 = IOMUX_PIN(26, 132), + MX31_PIN_SCK6 = IOMUX_PIN(25, 133), + MX31_PIN_SRXD6 = IOMUX_PIN(24, 134), + MX31_PIN_STXD6 = IOMUX_PIN(23, 135), + MX31_PIN_SFS5 = IOMUX_PIN(0xff, 136), + MX31_PIN_SCK5 = IOMUX_PIN(0xff, 137), + MX31_PIN_SRXD5 = IOMUX_PIN(22, 138), + MX31_PIN_STXD5 = IOMUX_PIN(21, 139), + MX31_PIN_SFS4 = IOMUX_PIN(0xff, 140), + MX31_PIN_SCK4 = IOMUX_PIN(0xff, 141), + MX31_PIN_SRXD4 = IOMUX_PIN(20, 142), + MX31_PIN_STXD4 = IOMUX_PIN(19, 143), + MX31_PIN_SFS3 = IOMUX_PIN(0xff, 144), + MX31_PIN_SCK3 = IOMUX_PIN(0xff, 145), + MX31_PIN_SRXD3 = IOMUX_PIN(18, 146), + MX31_PIN_STXD3 = IOMUX_PIN(17, 147), + MX31_PIN_I2C_DAT = IOMUX_PIN(0xff, 148), + MX31_PIN_I2C_CLK = IOMUX_PIN(0xff, 149), + MX31_PIN_CSI_PIXCLK = IOMUX_PIN(83, 150), + MX31_PIN_CSI_HSYNC = IOMUX_PIN(82, 151), + MX31_PIN_CSI_VSYNC = IOMUX_PIN(81, 152), + MX31_PIN_CSI_MCLK = IOMUX_PIN(80, 153), + MX31_PIN_CSI_D15 = IOMUX_PIN(79, 154), + MX31_PIN_CSI_D14 = IOMUX_PIN(78, 155), + MX31_PIN_CSI_D13 = IOMUX_PIN(77, 156), + MX31_PIN_CSI_D12 = IOMUX_PIN(76, 157), + MX31_PIN_CSI_D11 = IOMUX_PIN(75, 158), + MX31_PIN_CSI_D10 = IOMUX_PIN(74, 159), + MX31_PIN_CSI_D9 = IOMUX_PIN(73, 160), + MX31_PIN_CSI_D8 = IOMUX_PIN(72, 161), + MX31_PIN_CSI_D7 = IOMUX_PIN(71, 162), + MX31_PIN_CSI_D6 = IOMUX_PIN(70, 163), + MX31_PIN_CSI_D5 = IOMUX_PIN(69, 164), + MX31_PIN_CSI_D4 = IOMUX_PIN(68, 165), + MX31_PIN_M_GRANT = IOMUX_PIN(0xff, 166), + MX31_PIN_M_REQUEST = IOMUX_PIN(0xff, 167), + MX31_PIN_PC_POE = IOMUX_PIN(0xff, 168), + MX31_PIN_PC_RW_B = IOMUX_PIN(0xff, 169), + MX31_PIN_IOIS16 = IOMUX_PIN(0xff, 170), + MX31_PIN_PC_RST = IOMUX_PIN(0xff, 171), + MX31_PIN_PC_BVD2 = IOMUX_PIN(0xff, 172), + MX31_PIN_PC_BVD1 = IOMUX_PIN(0xff, 173), + MX31_PIN_PC_VS2 = IOMUX_PIN(0xff, 174), + MX31_PIN_PC_VS1 = IOMUX_PIN(0xff, 175), + MX31_PIN_PC_PWRON = IOMUX_PIN(0xff, 176), + MX31_PIN_PC_READY = IOMUX_PIN(0xff, 177), + MX31_PIN_PC_WAIT_B = IOMUX_PIN(0xff, 178), + MX31_PIN_PC_CD2_B = IOMUX_PIN(0xff, 179), + MX31_PIN_PC_CD1_B = IOMUX_PIN(0xff, 180), + MX31_PIN_D0 = IOMUX_PIN(0xff, 181), + MX31_PIN_D1 = IOMUX_PIN(0xff, 182), + MX31_PIN_D2 = IOMUX_PIN(0xff, 183), + MX31_PIN_D3 = IOMUX_PIN(0xff, 184), + MX31_PIN_D4 = IOMUX_PIN(0xff, 185), + MX31_PIN_D5 = IOMUX_PIN(0xff, 186), + MX31_PIN_D6 = IOMUX_PIN(0xff, 187), + MX31_PIN_D7 = IOMUX_PIN(0xff, 188), + MX31_PIN_D8 = IOMUX_PIN(0xff, 189), + MX31_PIN_D9 = IOMUX_PIN(0xff, 190), + MX31_PIN_D10 = IOMUX_PIN(0xff, 191), + MX31_PIN_D11 = IOMUX_PIN(0xff, 192), + MX31_PIN_D12 = IOMUX_PIN(0xff, 193), + MX31_PIN_D13 = IOMUX_PIN(0xff, 194), + MX31_PIN_D14 = IOMUX_PIN(0xff, 195), + MX31_PIN_D15 = IOMUX_PIN(0xff, 196), + MX31_PIN_NFRB = IOMUX_PIN(16, 197), + MX31_PIN_NFCE_B = IOMUX_PIN(15, 198), + MX31_PIN_NFWP_B = IOMUX_PIN(14, 199), + MX31_PIN_NFCLE = IOMUX_PIN(13, 200), + MX31_PIN_NFALE = IOMUX_PIN(12, 201), + MX31_PIN_NFRE_B = IOMUX_PIN(11, 202), + MX31_PIN_NFWE_B = IOMUX_PIN(10, 203), + MX31_PIN_SDQS3 = IOMUX_PIN(0xff, 204), + MX31_PIN_SDQS2 = IOMUX_PIN(0xff, 205), + MX31_PIN_SDQS1 = IOMUX_PIN(0xff, 206), + MX31_PIN_SDQS0 = IOMUX_PIN(0xff, 207), + MX31_PIN_SDCLK_B = IOMUX_PIN(0xff, 208), + MX31_PIN_SDCLK = IOMUX_PIN(0xff, 209), + MX31_PIN_SDCKE1 = IOMUX_PIN(0xff, 210), + MX31_PIN_SDCKE0 = IOMUX_PIN(0xff, 211), + MX31_PIN_SDWE = IOMUX_PIN(0xff, 212), + MX31_PIN_CAS = IOMUX_PIN(0xff, 213), + MX31_PIN_RAS = IOMUX_PIN(0xff, 214), + MX31_PIN_RW = IOMUX_PIN(0xff, 215), + MX31_PIN_BCLK = IOMUX_PIN(0xff, 216), + MX31_PIN_LBA = IOMUX_PIN(0xff, 217), + MX31_PIN_ECB = IOMUX_PIN(0xff, 218), + MX31_PIN_CS5 = IOMUX_PIN(0xff, 219), + MX31_PIN_CS4 = IOMUX_PIN(0xff, 220), + MX31_PIN_CS3 = IOMUX_PIN(0xff, 221), + MX31_PIN_CS2 = IOMUX_PIN(0xff, 222), + MX31_PIN_CS1 = IOMUX_PIN(0xff, 223), + MX31_PIN_CS0 = IOMUX_PIN(0xff, 224), + MX31_PIN_OE = IOMUX_PIN(0xff, 225), + MX31_PIN_EB1 = IOMUX_PIN(0xff, 226), + MX31_PIN_EB0 = IOMUX_PIN(0xff, 227), + MX31_PIN_DQM3 = IOMUX_PIN(0xff, 228), + MX31_PIN_DQM2 = IOMUX_PIN(0xff, 229), + MX31_PIN_DQM1 = IOMUX_PIN(0xff, 230), + MX31_PIN_DQM0 = IOMUX_PIN(0xff, 231), + MX31_PIN_SD31 = IOMUX_PIN(0xff, 232), + MX31_PIN_SD30 = IOMUX_PIN(0xff, 233), + MX31_PIN_SD29 = IOMUX_PIN(0xff, 234), + MX31_PIN_SD28 = IOMUX_PIN(0xff, 235), + MX31_PIN_SD27 = IOMUX_PIN(0xff, 236), + MX31_PIN_SD26 = IOMUX_PIN(0xff, 237), + MX31_PIN_SD25 = IOMUX_PIN(0xff, 238), + MX31_PIN_SD24 = IOMUX_PIN(0xff, 239), + MX31_PIN_SD23 = IOMUX_PIN(0xff, 240), + MX31_PIN_SD22 = IOMUX_PIN(0xff, 241), + MX31_PIN_SD21 = IOMUX_PIN(0xff, 242), + MX31_PIN_SD20 = IOMUX_PIN(0xff, 243), + MX31_PIN_SD19 = IOMUX_PIN(0xff, 244), + MX31_PIN_SD18 = IOMUX_PIN(0xff, 245), + MX31_PIN_SD17 = IOMUX_PIN(0xff, 246), + MX31_PIN_SD16 = IOMUX_PIN(0xff, 247), + MX31_PIN_SD15 = IOMUX_PIN(0xff, 248), + MX31_PIN_SD14 = IOMUX_PIN(0xff, 249), + MX31_PIN_SD13 = IOMUX_PIN(0xff, 250), + MX31_PIN_SD12 = IOMUX_PIN(0xff, 251), + MX31_PIN_SD11 = IOMUX_PIN(0xff, 252), + MX31_PIN_SD10 = IOMUX_PIN(0xff, 253), + MX31_PIN_SD9 = IOMUX_PIN(0xff, 254), + MX31_PIN_SD8 = IOMUX_PIN(0xff, 255), + MX31_PIN_SD7 = IOMUX_PIN(0xff, 256), + MX31_PIN_SD6 = IOMUX_PIN(0xff, 257), + MX31_PIN_SD5 = IOMUX_PIN(0xff, 258), + MX31_PIN_SD4 = IOMUX_PIN(0xff, 259), + MX31_PIN_SD3 = IOMUX_PIN(0xff, 260), + MX31_PIN_SD2 = IOMUX_PIN(0xff, 261), + MX31_PIN_SD1 = IOMUX_PIN(0xff, 262), + MX31_PIN_SD0 = IOMUX_PIN(0xff, 263), + MX31_PIN_SDBA0 = IOMUX_PIN(0xff, 264), + MX31_PIN_SDBA1 = IOMUX_PIN(0xff, 265), + MX31_PIN_A25 = IOMUX_PIN(0xff, 266), + MX31_PIN_A24 = IOMUX_PIN(0xff, 267), + MX31_PIN_A23 = IOMUX_PIN(0xff, 268), + MX31_PIN_A22 = IOMUX_PIN(0xff, 269), + MX31_PIN_A21 = IOMUX_PIN(0xff, 270), + MX31_PIN_A20 = IOMUX_PIN(0xff, 271), + MX31_PIN_A19 = IOMUX_PIN(0xff, 272), + MX31_PIN_A18 = IOMUX_PIN(0xff, 273), + MX31_PIN_A17 = IOMUX_PIN(0xff, 274), + MX31_PIN_A16 = IOMUX_PIN(0xff, 275), + MX31_PIN_A14 = IOMUX_PIN(0xff, 276), + MX31_PIN_A15 = IOMUX_PIN(0xff, 277), + MX31_PIN_A13 = IOMUX_PIN(0xff, 278), + MX31_PIN_A12 = IOMUX_PIN(0xff, 279), + MX31_PIN_A11 = IOMUX_PIN(0xff, 280), + MX31_PIN_MA10 = IOMUX_PIN(0xff, 281), + MX31_PIN_A10 = IOMUX_PIN(0xff, 282), + MX31_PIN_A9 = IOMUX_PIN(0xff, 283), + MX31_PIN_A8 = IOMUX_PIN(0xff, 284), + MX31_PIN_A7 = IOMUX_PIN(0xff, 285), + MX31_PIN_A6 = IOMUX_PIN(0xff, 286), + MX31_PIN_A5 = IOMUX_PIN(0xff, 287), + MX31_PIN_A4 = IOMUX_PIN(0xff, 288), + MX31_PIN_A3 = IOMUX_PIN(0xff, 289), + MX31_PIN_A2 = IOMUX_PIN(0xff, 290), + MX31_PIN_A1 = IOMUX_PIN(0xff, 291), + MX31_PIN_A0 = IOMUX_PIN(0xff, 292), + MX31_PIN_VPG1 = IOMUX_PIN(0xff, 293), + MX31_PIN_VPG0 = IOMUX_PIN(0xff, 294), + MX31_PIN_DVFS1 = IOMUX_PIN(0xff, 295), + MX31_PIN_DVFS0 = IOMUX_PIN(0xff, 296), + MX31_PIN_VSTBY = IOMUX_PIN(0xff, 297), + MX31_PIN_POWER_FAIL = IOMUX_PIN(0xff, 298), + MX31_PIN_CKIL = IOMUX_PIN(0xff, 299), + MX31_PIN_BOOT_MODE4 = IOMUX_PIN(0xff, 300), + MX31_PIN_BOOT_MODE3 = IOMUX_PIN(0xff, 301), + MX31_PIN_BOOT_MODE2 = IOMUX_PIN(0xff, 302), + MX31_PIN_BOOT_MODE1 = IOMUX_PIN(0xff, 303), + MX31_PIN_BOOT_MODE0 = IOMUX_PIN(0xff, 304), + MX31_PIN_CLKO = IOMUX_PIN(0xff, 305), + MX31_PIN_POR_B = IOMUX_PIN(0xff, 306), + MX31_PIN_RESET_IN_B = IOMUX_PIN(0xff, 307), + MX31_PIN_CKIH = IOMUX_PIN(0xff, 308), + MX31_PIN_SIMPD0 = IOMUX_PIN(35, 309), + MX31_PIN_SRX0 = IOMUX_PIN(34, 310), + MX31_PIN_STX0 = IOMUX_PIN(33, 311), + MX31_PIN_SVEN0 = IOMUX_PIN(32, 312), + MX31_PIN_SRST0 = IOMUX_PIN(67, 313), + MX31_PIN_SCLK0 = IOMUX_PIN(66, 314), + MX31_PIN_GPIO3_1 = IOMUX_PIN(65, 315), + MX31_PIN_GPIO3_0 = IOMUX_PIN(64, 316), + MX31_PIN_GPIO1_6 = IOMUX_PIN( 6, 317), + MX31_PIN_GPIO1_5 = IOMUX_PIN( 5, 318), + MX31_PIN_GPIO1_4 = IOMUX_PIN( 4, 319), + MX31_PIN_GPIO1_3 = IOMUX_PIN( 3, 320), + MX31_PIN_GPIO1_2 = IOMUX_PIN( 2, 321), + MX31_PIN_GPIO1_1 = IOMUX_PIN( 1, 322), + MX31_PIN_GPIO1_0 = IOMUX_PIN( 0, 323), + MX31_PIN_PWMO = IOMUX_PIN( 9, 324), + MX31_PIN_WATCHDOG_RST = IOMUX_PIN(0xff, 325), + MX31_PIN_COMPARE = IOMUX_PIN( 8, 326), + MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327), +}; + +#define PIN_MAX 327 +#define NB_PORTS 12 /* NB_PINS/32, we chose 32 pins per "PORT" */ + +/* + * Convenience values for use with mxc_iomux_mode() + * + * Format here is MX31_PIN_(pin name)__(function) + */ +#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_SCLK__RTS3 IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_RTS1__SFS IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_TXD1__SCK IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_RXD1__STXDA IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_DCD_DCE1__DCD_DCE1 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_RI_DCE1__RI_DCE1 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DSR_DCE1__DSR_DCE1 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DTR_DCE1__DTR_DCE1 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DTR_DCE1__SRXDA IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_CTS2__CTS2 IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_RTS2__RTS2 IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_TXD2__TXD2 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_RXD2__RXD2 IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DCD_DTE1__DCD_DTE2 IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_RI_DTE1__RI_DTE2 IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_DSR_DTE1__DSR_DTE2 IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_DTR_DTE1__DTR_DTE2 IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_OCONFIG_ALT3 | IOMUX_ICONFIG_NONE) +#define MX31_PIN_PC_RST__CTS5 IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2) +#define MX31_PIN_PC_VS2__RTS5 IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2) +#define MX31_PIN_PC_BVD2__TXD5 IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2) +#define MX31_PIN_PC_BVD1__RXD5 IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_CSPI1_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI1_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI1_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI1_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI1_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI1_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI1_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI2_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI2_MOSI__SCL IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI2_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI2_MISO__SDA IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI2_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI2_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI2_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI2_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI3_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI3_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI3_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI3_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_FUNC) +#define MX31_PIN_BATT_LINE__OWIRE IOMUX_MODE(MX31_PIN_BATT_LINE, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CS4__CS4 IOMUX_MODE(MX31_PIN_CS4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SD1_DATA3__SD1_DATA3 IOMUX_MODE(MX31_PIN_SD1_DATA3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SD1_DATA2__SD1_DATA2 IOMUX_MODE(MX31_PIN_SD1_DATA2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SD1_DATA1__SD1_DATA1 IOMUX_MODE(MX31_PIN_SD1_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC) +#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO) +#define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD3__LD3 IOMUX_MODE(MX31_PIN_LD3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD4__LD4 IOMUX_MODE(MX31_PIN_LD4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD5__LD5 IOMUX_MODE(MX31_PIN_LD5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD6__LD6 IOMUX_MODE(MX31_PIN_LD6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD7__LD7 IOMUX_MODE(MX31_PIN_LD7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD8__LD8 IOMUX_MODE(MX31_PIN_LD8, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD9__LD9 IOMUX_MODE(MX31_PIN_LD9, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD10__LD10 IOMUX_MODE(MX31_PIN_LD10, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD11__LD11 IOMUX_MODE(MX31_PIN_LD11, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD12__LD12 IOMUX_MODE(MX31_PIN_LD12, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD13__LD13 IOMUX_MODE(MX31_PIN_LD13, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD14__LD14 IOMUX_MODE(MX31_PIN_LD14, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD15__LD15 IOMUX_MODE(MX31_PIN_LD15, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD16__LD16 IOMUX_MODE(MX31_PIN_LD16, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD17__LD17 IOMUX_MODE(MX31_PIN_LD17, IOMUX_CONFIG_FUNC) +#define MX31_PIN_VSYNC3__VSYNC3 IOMUX_MODE(MX31_PIN_VSYNC3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_HSYNC__HSYNC IOMUX_MODE(MX31_PIN_HSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_FPSHIFT__FPSHIFT IOMUX_MODE(MX31_PIN_FPSHIFT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DRDY0__DRDY0 IOMUX_MODE(MX31_PIN_DRDY0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_D3_REV__D3_REV IOMUX_MODE(MX31_PIN_D3_REV, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CONTRAST__CONTRAST IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC) +#define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC) +#define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC) +#define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI2_SCLK__I2C3_SCL IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) +#define MX31_PIN_CSI_D4__GPIO3_4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO) +#define MX31_PIN_CSI_D5__GPIO3_5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO) +#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_SFS6__USBH1_SUSPEND IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_NFRE_B__GPIO1_11 IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO) +#define MX31_PIN_NFALE__GPIO1_12 IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO) +#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_STXD3__USBH2_DATA2 IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SRXD3__USBH2_DATA3 IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SCK3__USBH2_DATA4 IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SFS3__USBH2_DATA5 IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_STXD6__USBH2_DATA6 IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SRXD6__USBH2_DATA7 IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SCK6__GPIO1_25 IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO) +#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO) +#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_GPIO1_0__GPIO1_0 IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_SVEN0__GPIO2_0 IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_STX0__GPIO2_1 IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_SRX0__GPIO2_2 IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_SIMPD0__GPIO2_3 IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_DTR_DCE1__GPIO2_8 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_DSR_DCE1__GPIO2_9 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_RI_DCE1__GPIO2_10 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_DCD_DCE1__GPIO2_11 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO) +#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO1_3__GPIO1_3 IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO) +#define MX31_PIN_CSPI2_SS1__CSPI3_SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_RTS1__GPIO2_6 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_CTS1__GPIO2_7 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_LCS0__GPIO3_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_STXD4__STXD4 IOMUX_MODE(MX31_PIN_STXD4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SRXD4__SRXD4 IOMUX_MODE(MX31_PIN_SRXD4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SCK4__SCK4 IOMUX_MODE(MX31_PIN_SCK4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SFS4__SFS4 IOMUX_MODE(MX31_PIN_SFS4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_STXD5__STXD5 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SRXD5__SRXD5 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SCK5__SCK5 IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SFS5__SFS5 IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW0_KEY_ROW0 IOMUX_MODE(MX31_PIN_KEY_ROW0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW1_KEY_ROW1 IOMUX_MODE(MX31_PIN_KEY_ROW1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW2_KEY_ROW2 IOMUX_MODE(MX31_PIN_KEY_ROW2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW3_KEY_ROW3 IOMUX_MODE(MX31_PIN_KEY_ROW3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW4_KEY_ROW4 IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW4_GPIO IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO) +#define MX31_PIN_KEY_ROW5_KEY_ROW5 IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW6_KEY_ROW6 IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW7_KEY_ROW7 IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL0_KEY_COL0 IOMUX_MODE(MX31_PIN_KEY_COL0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL1_KEY_COL1 IOMUX_MODE(MX31_PIN_KEY_COL1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL2_KEY_COL2 IOMUX_MODE(MX31_PIN_KEY_COL2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL3_KEY_COL3 IOMUX_MODE(MX31_PIN_KEY_COL3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL4_KEY_COL4 IOMUX_MODE(MX31_PIN_KEY_COL4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL5_KEY_COL5 IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL6_KEY_COL6 IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL7_KEY_COL7 IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_WATCHDOG_RST__WATCHDOG_RST IOMUX_MODE(MX31_PIN_WATCHDOG_RST, IOMUX_CONFIG_FUNC) + + +/* + * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0, + * cspi2_ss1, cspi1_ss0 cspi1_ss1 + */ + +/* + * This function configures the pad value for a IOMUX pin. + */ +void mxc_iomux_set_pad(enum iomux_pins, u32); + +#endif /* ifndef __MACH_IOMUX_MX3_H__ */ diff --git a/arch/arm/mach-imx/iomux-mx35.h b/arch/arm/mach-imx/iomux-mx35.h new file mode 100644 index 000000000..90bfa6b5b --- /dev/null +++ b/arch/arm/mach-imx/iomux-mx35.h @@ -0,0 +1,1267 @@ +/* + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option, NO_PAD_CTRL) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IOMUX_MX35_H__ +#define __MACH_IOMUX_MX35_H__ + +#include "iomux-v3.h" + +/* + * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named + * GPIO_<unit>_<num> see also iomux-v3.h + */ + +/* PAD MUX ALT INPSE PATH */ +#define MX35_PAD_CAPTURE__GPT_CAPIN1 IOMUX_PAD(0x328, 0x004, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__GPT_CMPOUT2 IOMUX_PAD(0x328, 0x004, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__CSPI2_SS1 IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__EPIT1_EPITO IOMUX_PAD(0x328, 0x004, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__CCM_CLK32K IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__GPIO1_4 IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL) + +#define MX35_PAD_COMPARE__GPT_CMPOUT1 IOMUX_PAD(0x32c, 0x008, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__GPT_CAPIN2 IOMUX_PAD(0x32c, 0x008, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__GPT_CMPOUT3 IOMUX_PAD(0x32c, 0x008, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__EPIT2_EPITO IOMUX_PAD(0x32c, 0x008, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__GPIO1_5 IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__SDMA_EXTDMA_2 IOMUX_PAD(0x32c, 0x008, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_WDOG_RST__WDOG_WDOG_B IOMUX_PAD(0x330, 0x00c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE IOMUX_PAD(0x330, 0x00c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_WDOG_RST__GPIO1_6 IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_0__OWIRE_LINE IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 IOMUX_PAD(0x334, 0x010, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__PWM_PWMO IOMUX_PAD(0x338, 0x014, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__CSPI1_SS2 IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT IOMUX_PAD(0x338, 0x014, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 IOMUX_PAD(0x338, 0x014, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO2_0__GPIO2_0 IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK IOMUX_PAD(0x33c, 0x018, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO3_0__GPIO3_0 IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK IOMUX_PAD(0x340, 0x01c, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B IOMUX_PAD(0x344, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_POR_B__CCM_POR_B IOMUX_PAD(0x348, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CLKO__CCM_CLKO IOMUX_PAD(0x34c, 0x020, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CLKO__GPIO1_8 IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL) + +#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 IOMUX_PAD(0x350, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 IOMUX_PAD(0x354, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 IOMUX_PAD(0x358, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 IOMUX_PAD(0x35c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 IOMUX_PAD(0x360, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_VSTBY__CCM_VSTBY IOMUX_PAD(0x364, 0x024, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_VSTBY__GPIO1_7 IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL) + +#define MX35_PAD_A0__EMI_EIM_DA_L_0 IOMUX_PAD(0x368, 0x028, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A1__EMI_EIM_DA_L_1 IOMUX_PAD(0x36c, 0x02c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A2__EMI_EIM_DA_L_2 IOMUX_PAD(0x370, 0x030, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A3__EMI_EIM_DA_L_3 IOMUX_PAD(0x374, 0x034, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A4__EMI_EIM_DA_L_4 IOMUX_PAD(0x378, 0x038, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A5__EMI_EIM_DA_L_5 IOMUX_PAD(0x37c, 0x03c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A6__EMI_EIM_DA_L_6 IOMUX_PAD(0x380, 0x040, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A7__EMI_EIM_DA_L_7 IOMUX_PAD(0x384, 0x044, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A8__EMI_EIM_DA_H_8 IOMUX_PAD(0x388, 0x048, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A9__EMI_EIM_DA_H_9 IOMUX_PAD(0x38c, 0x04c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A10__EMI_EIM_DA_H_10 IOMUX_PAD(0x390, 0x050, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_MA10__EMI_MA10 IOMUX_PAD(0x394, 0x054, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A11__EMI_EIM_DA_H_11 IOMUX_PAD(0x398, 0x058, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A12__EMI_EIM_DA_H_12 IOMUX_PAD(0x39c, 0x05c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A13__EMI_EIM_DA_H_13 IOMUX_PAD(0x3a0, 0x060, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A14__EMI_EIM_DA_H2_14 IOMUX_PAD(0x3a4, 0x064, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A15__EMI_EIM_DA_H2_15 IOMUX_PAD(0x3a8, 0x068, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A16__EMI_EIM_A_16 IOMUX_PAD(0x3ac, 0x06c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A17__EMI_EIM_A_17 IOMUX_PAD(0x3b0, 0x070, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A18__EMI_EIM_A_18 IOMUX_PAD(0x3b4, 0x074, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A19__EMI_EIM_A_19 IOMUX_PAD(0x3b8, 0x078, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A20__EMI_EIM_A_20 IOMUX_PAD(0x3bc, 0x07c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A21__EMI_EIM_A_21 IOMUX_PAD(0x3c0, 0x080, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A22__EMI_EIM_A_22 IOMUX_PAD(0x3c4, 0x084, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A23__EMI_EIM_A_23 IOMUX_PAD(0x3c8, 0x088, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A24__EMI_EIM_A_24 IOMUX_PAD(0x3cc, 0x08c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A25__EMI_EIM_A_25 IOMUX_PAD(0x3d0, 0x090, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDBA1__EMI_EIM_SDBA1 IOMUX_PAD(0x3d4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDBA0__EMI_EIM_SDBA0 IOMUX_PAD(0x3d8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD0__EMI_DRAM_D_0 IOMUX_PAD(0x3dc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1__EMI_DRAM_D_1 IOMUX_PAD(0x3e0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD2__EMI_DRAM_D_2 IOMUX_PAD(0x3e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD3__EMI_DRAM_D_3 IOMUX_PAD(0x3e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD4__EMI_DRAM_D_4 IOMUX_PAD(0x3ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD5__EMI_DRAM_D_5 IOMUX_PAD(0x3f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD6__EMI_DRAM_D_6 IOMUX_PAD(0x3f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD7__EMI_DRAM_D_7 IOMUX_PAD(0x3f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD8__EMI_DRAM_D_8 IOMUX_PAD(0x3fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD9__EMI_DRAM_D_9 IOMUX_PAD(0x400, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD10__EMI_DRAM_D_10 IOMUX_PAD(0x404, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD11__EMI_DRAM_D_11 IOMUX_PAD(0x408, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD12__EMI_DRAM_D_12 IOMUX_PAD(0x40c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD13__EMI_DRAM_D_13 IOMUX_PAD(0x410, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD14__EMI_DRAM_D_14 IOMUX_PAD(0x414, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD15__EMI_DRAM_D_15 IOMUX_PAD(0x418, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD16__EMI_DRAM_D_16 IOMUX_PAD(0x41c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD17__EMI_DRAM_D_17 IOMUX_PAD(0x420, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD18__EMI_DRAM_D_18 IOMUX_PAD(0x424, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD19__EMI_DRAM_D_19 IOMUX_PAD(0x428, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD20__EMI_DRAM_D_20 IOMUX_PAD(0x42c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD21__EMI_DRAM_D_21 IOMUX_PAD(0x430, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD22__EMI_DRAM_D_22 IOMUX_PAD(0x434, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD23__EMI_DRAM_D_23 IOMUX_PAD(0x438, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD24__EMI_DRAM_D_24 IOMUX_PAD(0x43c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD25__EMI_DRAM_D_25 IOMUX_PAD(0x440, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD26__EMI_DRAM_D_26 IOMUX_PAD(0x444, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD27__EMI_DRAM_D_27 IOMUX_PAD(0x448, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD28__EMI_DRAM_D_28 IOMUX_PAD(0x44c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD29__EMI_DRAM_D_29 IOMUX_PAD(0x450, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD30__EMI_DRAM_D_30 IOMUX_PAD(0x454, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD31__EMI_DRAM_D_31 IOMUX_PAD(0x458, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM0__EMI_DRAM_DQM_0 IOMUX_PAD(0x45c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM1__EMI_DRAM_DQM_1 IOMUX_PAD(0x460, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM2__EMI_DRAM_DQM_2 IOMUX_PAD(0x464, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM3__EMI_DRAM_DQM_3 IOMUX_PAD(0x468, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_EB0__EMI_EIM_EB0_B IOMUX_PAD(0x46c, 0x094, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_EB1__EMI_EIM_EB1_B IOMUX_PAD(0x470, 0x098, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_OE__EMI_EIM_OE IOMUX_PAD(0x474, 0x09c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS0__EMI_EIM_CS0 IOMUX_PAD(0x478, 0x0a0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS1__EMI_EIM_CS1 IOMUX_PAD(0x47c, 0x0a4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS1__EMI_NANDF_CE3 IOMUX_PAD(0x47c, 0x0a4, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS2__EMI_EIM_CS2 IOMUX_PAD(0x480, 0x0a8, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS3__EMI_EIM_CS3 IOMUX_PAD(0x484, 0x0ac, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS4__EMI_EIM_CS4 IOMUX_PAD(0x488, 0x0b0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS4__EMI_DTACK_B IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL) +#define MX35_PAD_CS4__EMI_NANDF_CE1 IOMUX_PAD(0x488, 0x0b0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS4__GPIO1_20 IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS5__EMI_EIM_CS5 IOMUX_PAD(0x48c, 0x0b4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS5__CSPI2_SS2 IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL) +#define MX35_PAD_CS5__CSPI1_SS2 IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL) +#define MX35_PAD_CS5__EMI_NANDF_CE2 IOMUX_PAD(0x48c, 0x0b4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS5__GPIO1_21 IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL) + +#define MX35_PAD_NF_CE0__EMI_NANDF_CE0 IOMUX_PAD(0x490, 0x0b8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NF_CE0__GPIO1_22 IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL) + +#define MX35_PAD_ECB__EMI_EIM_ECB IOMUX_PAD(0x494, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LBA__EMI_EIM_LBA IOMUX_PAD(0x498, 0x0bc, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_BCLK__EMI_EIM_BCLK IOMUX_PAD(0x49c, 0x0c0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RW__EMI_EIM_RW IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RAS__EMI_DRAM_RAS IOMUX_PAD(0x4a4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CAS__EMI_DRAM_CAS IOMUX_PAD(0x4a8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDWE__EMI_DRAM_SDWE IOMUX_PAD(0x4ac, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 IOMUX_PAD(0x4b0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 IOMUX_PAD(0x4b4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK IOMUX_PAD(0x4b8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 IOMUX_PAD(0x4bc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 IOMUX_PAD(0x4c0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 IOMUX_PAD(0x4c4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 IOMUX_PAD(0x4c8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__GPIO2_18 IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__GPIO2_19 IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFALE__EMI_NANDF_ALE IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__USB_TOP_USBH2_STP IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__IPU_DISPB_CS0 IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__GPIO2_20 IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFCLE__EMI_NANDF_CLE IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__GPIO2_21 IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__IPU_DISPB_WR IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__GPIO2_22 IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFRB__EMI_NANDF_RB IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRB__IPU_DISPB_RD IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRB__GPIO2_23 IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D15__EMI_EIM_D_15 IOMUX_PAD(0x4e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D14__EMI_EIM_D_14 IOMUX_PAD(0x4e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D13__EMI_EIM_D_13 IOMUX_PAD(0x4ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D12__EMI_EIM_D_12 IOMUX_PAD(0x4f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D11__EMI_EIM_D_11 IOMUX_PAD(0x4f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D10__EMI_EIM_D_10 IOMUX_PAD(0x4f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D9__EMI_EIM_D_9 IOMUX_PAD(0x4fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D8__EMI_EIM_D_8 IOMUX_PAD(0x500, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D7__EMI_EIM_D_7 IOMUX_PAD(0x504, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D6__EMI_EIM_D_6 IOMUX_PAD(0x508, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D5__EMI_EIM_D_5 IOMUX_PAD(0x50c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D4__EMI_EIM_D_4 IOMUX_PAD(0x510, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3__EMI_EIM_D_3 IOMUX_PAD(0x514, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D2__EMI_EIM_D_2 IOMUX_PAD(0x518, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D1__EMI_EIM_D_1 IOMUX_PAD(0x51c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D0__EMI_EIM_D_0 IOMUX_PAD(0x520, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D8__IPU_CSI_D_8 IOMUX_PAD(0x524, 0x0e0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D8__KPP_COL_0 IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D8__GPIO1_20 IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL) +#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 IOMUX_PAD(0x524, 0x0e0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D9__IPU_CSI_D_9 IOMUX_PAD(0x528, 0x0e4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D9__KPP_COL_1 IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D9__GPIO1_21 IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL) +#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 IOMUX_PAD(0x528, 0x0e4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D10__IPU_CSI_D_10 IOMUX_PAD(0x52c, 0x0e8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D10__KPP_COL_2 IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D10__GPIO1_22 IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL) +#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 IOMUX_PAD(0x52c, 0x0e8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D11__IPU_CSI_D_11 IOMUX_PAD(0x530, 0x0ec, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D11__KPP_COL_3 IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D11__GPIO1_23 IOMUX_PAD(0x530, 0x0ec, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D12__IPU_CSI_D_12 IOMUX_PAD(0x534, 0x0f0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D12__KPP_ROW_0 IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D12__GPIO1_24 IOMUX_PAD(0x534, 0x0f0, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D13__IPU_CSI_D_13 IOMUX_PAD(0x538, 0x0f4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D13__KPP_ROW_1 IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D13__GPIO1_25 IOMUX_PAD(0x538, 0x0f4, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D14__IPU_CSI_D_14 IOMUX_PAD(0x53c, 0x0f8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D14__KPP_ROW_2 IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D14__GPIO1_26 IOMUX_PAD(0x53c, 0x0f8, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D15__IPU_CSI_D_15 IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D15__KPP_ROW_3 IOMUX_PAD(0x540, 0x0fc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D15__GPIO1_27 IOMUX_PAD(0x540, 0x0fc, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK IOMUX_PAD(0x544, 0x100, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_MCLK__GPIO1_28 IOMUX_PAD(0x544, 0x100, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC IOMUX_PAD(0x548, 0x104, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_VSYNC__GPIO1_29 IOMUX_PAD(0x548, 0x104, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC IOMUX_PAD(0x54c, 0x108, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_HSYNC__GPIO1_30 IOMUX_PAD(0x54c, 0x108, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK IOMUX_PAD(0x550, 0x10c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_PIXCLK__GPIO1_31 IOMUX_PAD(0x550, 0x10c, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C1_CLK__I2C1_SCL IOMUX_PAD(0x554, 0x110, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C1_CLK__GPIO2_24 IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK IOMUX_PAD(0x554, 0x110, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C1_DAT__I2C1_SDA IOMUX_PAD(0x558, 0x114, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C1_DAT__GPIO2_25 IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C2_CLK__I2C2_SCL IOMUX_PAD(0x55c, 0x118, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__CAN1_TXCAN IOMUX_PAD(0x55c, 0x118, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR IOMUX_PAD(0x55c, 0x118, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__GPIO2_26 IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x55c, 0x118, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C2_DAT__I2C2_SDA IOMUX_PAD(0x560, 0x11c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__CAN1_RXCAN IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__GPIO2_27 IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x560, 0x11c, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD IOMUX_PAD(0x564, 0x120, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD4__GPIO2_28 IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 IOMUX_PAD(0x564, 0x120, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD IOMUX_PAD(0x568, 0x124, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD4__GPIO2_29 IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 IOMUX_PAD(0x568, 0x124, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC IOMUX_PAD(0x56c, 0x128, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK4__GPIO2_30 IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 IOMUX_PAD(0x56c, 0x128, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS IOMUX_PAD(0x570, 0x12c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS4__GPIO2_31 IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 IOMUX_PAD(0x570, 0x12c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD IOMUX_PAD(0x574, 0x130, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x574, 0x130, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD5__CSPI2_MOSI IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD5__GPIO1_0 IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL) +#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 IOMUX_PAD(0x574, 0x130, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD IOMUX_PAD(0x578, 0x134, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__CSPI2_MISO IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__GPIO1_1 IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 IOMUX_PAD(0x578, 0x134, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC IOMUX_PAD(0x57c, 0x138, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__CSPI2_SCLK IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__GPIO1_2 IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 IOMUX_PAD(0x57c, 0x138, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS IOMUX_PAD(0x580, 0x13c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS5__CSPI2_RDY IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS5__GPIO1_3 IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 IOMUX_PAD(0x580, 0x13c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCKR__ESAI_SCKR IOMUX_PAD(0x584, 0x140, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCKR__GPIO1_4 IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL) +#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 IOMUX_PAD(0x584, 0x140, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FSR__ESAI_FSR IOMUX_PAD(0x588, 0x144, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FSR__GPIO1_5 IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL) +#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 IOMUX_PAD(0x588, 0x144, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_HCKR__ESAI_HCKR IOMUX_PAD(0x58c, 0x148, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS IOMUX_PAD(0x58c, 0x148, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__CSPI2_SS0 IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__IPU_FLASH_STROBE IOMUX_PAD(0x58c, 0x148, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__GPIO1_6 IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL) +#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 IOMUX_PAD(0x58c, 0x148, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCKT__ESAI_SCKT IOMUX_PAD(0x590, 0x14c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCKT__GPIO1_7 IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL) +#define MX35_PAD_SCKT__IPU_CSI_D_0 IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL) +#define MX35_PAD_SCKT__KPP_ROW_2 IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL) + +#define MX35_PAD_FST__ESAI_FST IOMUX_PAD(0x594, 0x150, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FST__GPIO1_8 IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL) +#define MX35_PAD_FST__IPU_CSI_D_1 IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL) +#define MX35_PAD_FST__KPP_ROW_3 IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL) + +#define MX35_PAD_HCKT__ESAI_HCKT IOMUX_PAD(0x598, 0x154, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__GPIO1_9 IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__IPU_CSI_D_2 IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__KPP_COL_3 IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0 IOMUX_PAD(0x59c, 0x158, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC IOMUX_PAD(0x59c, 0x158, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__CSPI2_SS2 IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__CAN2_TXCAN IOMUX_PAD(0x59c, 0x158, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__UART2_DTR IOMUX_PAD(0x59c, 0x158, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__GPIO1_10 IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 IOMUX_PAD(0x59c, 0x158, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1 IOMUX_PAD(0x5a0, 0x15c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS IOMUX_PAD(0x5a0, 0x15c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__CSPI2_SS3 IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__CAN2_RXCAN IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__UART2_DSR IOMUX_PAD(0x5a0, 0x15c, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__GPIO1_11 IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__IPU_CSI_D_3 IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__KPP_ROW_0 IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2 IOMUX_PAD(0x5a4, 0x160, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__I2C3_SCL IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1 IOMUX_PAD(0x5a4, 0x160, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__GPIO1_12 IOMUX_PAD(0x5a4, 0x160, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__IPU_CSI_D_4 IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__KPP_ROW_1 IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3 IOMUX_PAD(0x5a8, 0x164, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__I2C3_SDA IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2 IOMUX_PAD(0x5a8, 0x164, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__GPIO1_13 IOMUX_PAD(0x5a8, 0x164, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__IPU_CSI_D_5 IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__KPP_COL_0 IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX1__ESAI_TX1 IOMUX_PAD(0x5ac, 0x168, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__CCM_PMIC_RDY IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL) +#define MX35_PAD_TX1__CSPI1_SS2 IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL) +#define MX35_PAD_TX1__EMI_NANDF_CE3 IOMUX_PAD(0x5ac, 0x168, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__UART2_RI IOMUX_PAD(0x5ac, 0x168, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__GPIO1_14 IOMUX_PAD(0x5ac, 0x168, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__IPU_CSI_D_6 IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__KPP_COL_1 IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX0__ESAI_TX0 IOMUX_PAD(0x5b0, 0x16c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL) +#define MX35_PAD_TX0__CSPI1_SS3 IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__EMI_DTACK_B IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL) +#define MX35_PAD_TX0__UART2_DCD IOMUX_PAD(0x5b0, 0x16c, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__GPIO1_15 IOMUX_PAD(0x5b0, 0x16c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__IPU_CSI_D_7 IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__KPP_COL_2 IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x5b4, 0x170, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MOSI__GPIO1_16 IOMUX_PAD(0x5b4, 0x170, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 IOMUX_PAD(0x5b4, 0x170, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x5b8, 0x174, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MISO__GPIO1_17 IOMUX_PAD(0x5b8, 0x174, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 IOMUX_PAD(0x5b8, 0x174, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x5bc, 0x178, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__OWIRE_LINE IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__CSPI2_SS3 IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__GPIO1_18 IOMUX_PAD(0x5bc, 0x178, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 IOMUX_PAD(0x5bc, 0x178, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x5c0, 0x17c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__PWM_PWMO IOMUX_PAD(0x5c0, 0x17c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__CCM_CLK32K IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__GPIO1_19 IOMUX_PAD(0x5c0, 0x17c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 IOMUX_PAD(0x5c0, 0x17c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 IOMUX_PAD(0x5c0, 0x17c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x5c4, 0x180, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SCLK__GPIO3_4 IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 IOMUX_PAD(0x5c4, 0x180, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 IOMUX_PAD(0x5c4, 0x180, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY IOMUX_PAD(0x5c8, 0x184, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 IOMUX_PAD(0x5c8, 0x184, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 IOMUX_PAD(0x5c8, 0x184, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RXD1__UART1_RXD_MUX IOMUX_PAD(0x5cc, 0x188, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD1__CSPI2_MOSI IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL) +#define MX35_PAD_RXD1__KPP_COL_4 IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD1__GPIO3_6 IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 IOMUX_PAD(0x5cc, 0x188, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TXD1__UART1_TXD_MUX IOMUX_PAD(0x5d0, 0x18c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD1__CSPI2_MISO IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL) +#define MX35_PAD_TXD1__KPP_COL_5 IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD1__GPIO3_7 IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 IOMUX_PAD(0x5d0, 0x18c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RTS1__UART1_RTS IOMUX_PAD(0x5d4, 0x190, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__CSPI2_SCLK IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS1__I2C3_SCL IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS1__IPU_CSI_D_0 IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS1__KPP_COL_6 IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__GPIO3_8 IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__EMI_NANDF_CE1 IOMUX_PAD(0x5d4, 0x190, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 IOMUX_PAD(0x5d4, 0x190, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CTS1__UART1_CTS IOMUX_PAD(0x5d8, 0x194, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__CSPI2_RDY IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS1__I2C3_SDA IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS1__IPU_CSI_D_1 IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS1__KPP_COL_7 IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__GPIO3_9 IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__EMI_NANDF_CE2 IOMUX_PAD(0x5d8, 0x194, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 IOMUX_PAD(0x5d8, 0x194, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RXD2__UART2_RXD_MUX IOMUX_PAD(0x5dc, 0x198, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD2__KPP_ROW_4 IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD2__GPIO3_10 IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL) + +#define MX35_PAD_TXD2__UART2_TXD_MUX IOMUX_PAD(0x5e0, 0x19c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL) +#define MX35_PAD_TXD2__KPP_ROW_5 IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD2__GPIO3_11 IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RTS2__UART2_RTS IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1 IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS2__CAN2_RXCAN IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS2__IPU_CSI_D_2 IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS2__KPP_ROW_6 IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__GPIO3_12 IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__UART3_RXD_MUX IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CTS2__UART2_CTS IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__CAN2_TXCAN IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__IPU_CSI_D_3 IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS2__KPP_ROW_7 IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__GPIO3_13 IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__UART3_TXD_MUX IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RTCK__ARM11P_TOP_RTCK IOMUX_PAD(0x5ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TCK__SJC_TCK IOMUX_PAD(0x5f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TMS__SJC_TMS IOMUX_PAD(0x5f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TDI__SJC_TDI IOMUX_PAD(0x5f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TDO__SJC_TDO IOMUX_PAD(0x5fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TRSTB__SJC_TRSTB IOMUX_PAD(0x600, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DE_B__SJC_DE_B IOMUX_PAD(0x604, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SJC_MOD__SJC_MOD IOMUX_PAD(0x608, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR IOMUX_PAD(0x60c, 0x1a8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR IOMUX_PAD(0x60c, 0x1a8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_PWR__GPIO3_14 IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL) + +#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC IOMUX_PAD(0x610, 0x1ac, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_OC__GPIO3_15 IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD0__IPU_DISPB_DAT_0 IOMUX_PAD(0x614, 0x1b0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD0__GPIO2_0 IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL) +#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 IOMUX_PAD(0x614, 0x1b0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD1__IPU_DISPB_DAT_1 IOMUX_PAD(0x618, 0x1b4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD1__GPIO2_1 IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL) +#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 IOMUX_PAD(0x618, 0x1b4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD2__IPU_DISPB_DAT_2 IOMUX_PAD(0x61c, 0x1b8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD2__GPIO2_2 IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 IOMUX_PAD(0x61c, 0x1b8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD3__IPU_DISPB_DAT_3 IOMUX_PAD(0x620, 0x1bc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD3__GPIO2_3 IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL) +#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 IOMUX_PAD(0x620, 0x1bc, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD4__IPU_DISPB_DAT_4 IOMUX_PAD(0x624, 0x1c0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD4__GPIO2_4 IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 IOMUX_PAD(0x624, 0x1c0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD5__IPU_DISPB_DAT_5 IOMUX_PAD(0x628, 0x1c4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD5__GPIO2_5 IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL) +#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 IOMUX_PAD(0x628, 0x1c4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD6__IPU_DISPB_DAT_6 IOMUX_PAD(0x62c, 0x1c8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD6__GPIO2_6 IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL) +#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 IOMUX_PAD(0x62c, 0x1c8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD7__IPU_DISPB_DAT_7 IOMUX_PAD(0x630, 0x1cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD7__GPIO2_7 IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL) +#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 IOMUX_PAD(0x630, 0x1cc, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD8__IPU_DISPB_DAT_8 IOMUX_PAD(0x634, 0x1d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD8__GPIO2_8 IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL) +#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD10__GPIO2_10 IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 IOMUX_PAD(0x63c, 0x1d8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD11__IPU_DISPB_DAT_11 IOMUX_PAD(0x640, 0x1dc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD11__GPIO2_11 IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL) +#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 IOMUX_PAD(0x640, 0x1dc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4 IOMUX_PAD(0x640, 0x1dc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD12__IPU_DISPB_DAT_12 IOMUX_PAD(0x644, 0x1e0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD12__GPIO2_12 IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL) +#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 IOMUX_PAD(0x644, 0x1e0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5 IOMUX_PAD(0x644, 0x1e0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD13__IPU_DISPB_DAT_13 IOMUX_PAD(0x648, 0x1e4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD13__GPIO2_13 IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL) +#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 IOMUX_PAD(0x648, 0x1e4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6 IOMUX_PAD(0x648, 0x1e4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD14__IPU_DISPB_DAT_14 IOMUX_PAD(0x64c, 0x1e8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD14__GPIO2_14 IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x64c, 0x1e8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7 IOMUX_PAD(0x64c, 0x1e8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD15__IPU_DISPB_DAT_15 IOMUX_PAD(0x650, 0x1ec, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD15__GPIO2_15 IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL) +#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x650, 0x1ec, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8 IOMUX_PAD(0x650, 0x1ec, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD16__IPU_DISPB_DAT_16 IOMUX_PAD(0x654, 0x1f0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__GPIO2_16 IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x654, 0x1f0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9 IOMUX_PAD(0x654, 0x1f0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD17__IPU_DISPB_DAT_17 IOMUX_PAD(0x658, 0x1f4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__IPU_DISPB_CS2 IOMUX_PAD(0x658, 0x1f4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__GPIO2_17 IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x658, 0x1f4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10 IOMUX_PAD(0x658, 0x1f4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD18__IPU_DISPB_DAT_18 IOMUX_PAD(0x65c, 0x1f8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL) +#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL) +#define MX35_PAD_LD18__ESDHC3_CMD IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__GPIO3_24 IOMUX_PAD(0x65c, 0x1f8, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x65c, 0x1f8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11 IOMUX_PAD(0x65c, 0x1f8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD19__IPU_DISPB_DAT_19 IOMUX_PAD(0x660, 0x1fc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__IPU_DISPB_BCLK IOMUX_PAD(0x660, 0x1fc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__IPU_DISPB_CS1 IOMUX_PAD(0x660, 0x1fc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__ESDHC3_CLK IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__GPIO3_25 IOMUX_PAD(0x660, 0x1fc, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x660, 0x1fc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12 IOMUX_PAD(0x660, 0x1fc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD20__IPU_DISPB_DAT_20 IOMUX_PAD(0x664, 0x200, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__IPU_DISPB_CS0 IOMUX_PAD(0x664, 0x200, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__IPU_DISPB_SD_CLK IOMUX_PAD(0x664, 0x200, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__ESDHC3_DAT0 IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__GPIO3_26 IOMUX_PAD(0x664, 0x200, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 IOMUX_PAD(0x664, 0x200, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13 IOMUX_PAD(0x664, 0x200, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD21__IPU_DISPB_DAT_21 IOMUX_PAD(0x668, 0x204, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__IPU_DISPB_PAR_RS IOMUX_PAD(0x668, 0x204, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__IPU_DISPB_SER_RS IOMUX_PAD(0x668, 0x204, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__ESDHC3_DAT1 IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__USB_TOP_USBOTG_STP IOMUX_PAD(0x668, 0x204, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__GPIO3_27 IOMUX_PAD(0x668, 0x204, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x668, 0x204, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14 IOMUX_PAD(0x668, 0x204, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD22__IPU_DISPB_DAT_22 IOMUX_PAD(0x66c, 0x208, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__IPU_DISPB_WR IOMUX_PAD(0x66c, 0x208, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__IPU_DISPB_SD_D_I IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__ESDHC3_DAT2 IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__GPIO3_28 IOMUX_PAD(0x66c, 0x208, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x66c, 0x208, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__ARM11P_TOP_TRCTL IOMUX_PAD(0x66c, 0x208, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD23__IPU_DISPB_DAT_23 IOMUX_PAD(0x670, 0x20c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__IPU_DISPB_RD IOMUX_PAD(0x670, 0x20c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL) +#define MX35_PAD_LD23__ESDHC3_DAT3 IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__GPIO3_29 IOMUX_PAD(0x670, 0x20c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x670, 0x20c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__ARM11P_TOP_TRCLK IOMUX_PAD(0x670, 0x20c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC IOMUX_PAD(0x674, 0x210, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__GPIO3_30 IOMUX_PAD(0x674, 0x210, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x674, 0x210, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 IOMUX_PAD(0x674, 0x210, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK IOMUX_PAD(0x678, 0x214, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK IOMUX_PAD(0x678, 0x214, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__GPIO3_31 IOMUX_PAD(0x678, 0x214, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 IOMUX_PAD(0x678, 0x214, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 IOMUX_PAD(0x678, 0x214, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY IOMUX_PAD(0x67c, 0x218, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O IOMUX_PAD(0x67c, 0x218, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__GPIO1_0 IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 IOMUX_PAD(0x67c, 0x218, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 IOMUX_PAD(0x67c, 0x218, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR IOMUX_PAD(0x680, 0x21c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CONTRAST__GPIO1_1 IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL) +#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 IOMUX_PAD(0x680, 0x21c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 IOMUX_PAD(0x680, 0x21c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC IOMUX_PAD(0x684, 0x220, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 IOMUX_PAD(0x684, 0x220, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__GPIO1_2 IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD IOMUX_PAD(0x684, 0x220, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 IOMUX_PAD(0x684, 0x220, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV IOMUX_PAD(0x688, 0x224, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS IOMUX_PAD(0x688, 0x224, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__GPIO1_3 IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x688, 0x224, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 IOMUX_PAD(0x688, 0x224, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS IOMUX_PAD(0x68c, 0x228, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__IPU_DISPB_CS2 IOMUX_PAD(0x68c, 0x228, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__GPIO1_4 IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x68c, 0x228, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 IOMUX_PAD(0x68c, 0x228, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL IOMUX_PAD(0x690, 0x22c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__GPIO1_5 IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x690, 0x22c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 IOMUX_PAD(0x690, 0x22c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x694, 0x230, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__MSHC_SCLK IOMUX_PAD(0x694, 0x230, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__GPIO1_6 IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL IOMUX_PAD(0x694, 0x230, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x698, 0x234, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__MSHC_BS IOMUX_PAD(0x698, 0x234, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK IOMUX_PAD(0x698, 0x234, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__GPIO1_7 IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK IOMUX_PAD(0x698, 0x234, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x69c, 0x238, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__MSHC_DATA_0 IOMUX_PAD(0x69c, 0x238, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 IOMUX_PAD(0x69c, 0x238, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__GPIO1_8 IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 IOMUX_PAD(0x69c, 0x238, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x6a0, 0x23c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__MSHC_DATA_1 IOMUX_PAD(0x6a0, 0x23c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS IOMUX_PAD(0x6a0, 0x23c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__GPIO1_9 IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 IOMUX_PAD(0x6a0, 0x23c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x6a4, 0x240, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__MSHC_DATA_2 IOMUX_PAD(0x6a4, 0x240, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR IOMUX_PAD(0x6a4, 0x240, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__GPIO1_10 IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 IOMUX_PAD(0x6a4, 0x240, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x6a8, 0x244, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__MSHC_DATA_3 IOMUX_PAD(0x6a8, 0x244, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD IOMUX_PAD(0x6a8, 0x244, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__GPIO1_11 IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 IOMUX_PAD(0x6a8, 0x244, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x6ac, 0x248, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__I2C3_SCL IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__ESDHC1_DAT4 IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__IPU_CSI_D_2 IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__GPIO2_0 IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x6ac, 0x248, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL) + +#define MX35_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x6b0, 0x24c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__I2C3_SDA IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__ESDHC1_DAT5 IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__IPU_CSI_D_3 IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__GPIO2_1 IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2 IOMUX_PAD(0x6b0, 0x24c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x6b4, 0x250, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6 IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4 IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__GPIO2_2 IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x6b8, 0x254, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX IOMUX_PAD(0x6b8, 0x254, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7 IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5 IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__GPIO2_3 IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x6bc, 0x258, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__UART3_RTS IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__CAN1_RXCAN IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6 IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__GPIO2_4 IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x6c0, 0x25c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__UART3_CTS IOMUX_PAD(0x6c0, 0x25c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__CAN1_TXCAN IOMUX_PAD(0x6c0, 0x25c, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7 IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__GPIO2_5 IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL) + +#define MX35_PAD_ATA_CS0__ATA_CS0 IOMUX_PAD(0x6c4, 0x260, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__CSPI1_SS3 IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1 IOMUX_PAD(0x6c4, 0x260, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__GPIO2_6 IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__IPU_DIAGB_0 IOMUX_PAD(0x6c4, 0x260, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 IOMUX_PAD(0x6c4, 0x260, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_CS1__ATA_CS1 IOMUX_PAD(0x6c8, 0x264, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2 IOMUX_PAD(0x6c8, 0x264, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__CSPI2_SS0 IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__GPIO2_7 IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__IPU_DIAGB_1 IOMUX_PAD(0x6c8, 0x264, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 IOMUX_PAD(0x6c8, 0x264, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DIOR__ATA_DIOR IOMUX_PAD(0x6cc, 0x268, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0 IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 IOMUX_PAD(0x6cc, 0x268, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__CSPI2_SS1 IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__GPIO2_8 IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2 IOMUX_PAD(0x6cc, 0x268, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 IOMUX_PAD(0x6cc, 0x268, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DIOW__ATA_DIOW IOMUX_PAD(0x6d0, 0x26c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1 IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP IOMUX_PAD(0x6d0, 0x26c, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 IOMUX_PAD(0x6d0, 0x26c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__CSPI2_MOSI IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__GPIO2_9 IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3 IOMUX_PAD(0x6d0, 0x26c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 IOMUX_PAD(0x6d0, 0x26c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DMACK__ATA_DMACK IOMUX_PAD(0x6d4, 0x270, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2 IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__CSPI2_MISO IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__GPIO2_10 IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4 IOMUX_PAD(0x6d4, 0x270, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 IOMUX_PAD(0x6d4, 0x270, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_RESET_B__ATA_RESET_B IOMUX_PAD(0x6d8, 0x274, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O IOMUX_PAD(0x6d8, 0x274, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__CSPI2_RDY IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__GPIO2_11 IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 IOMUX_PAD(0x6d8, 0x274, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 IOMUX_PAD(0x6d8, 0x274, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_IORDY__ATA_IORDY IOMUX_PAD(0x6dc, 0x278, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4 IOMUX_PAD(0x6dc, 0x278, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4 IOMUX_PAD(0x6dc, 0x278, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__GPIO2_12 IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6 IOMUX_PAD(0x6dc, 0x278, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 IOMUX_PAD(0x6dc, 0x278, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA0__ATA_DATA_0 IOMUX_PAD(0x6e0, 0x27c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5 IOMUX_PAD(0x6e0, 0x27c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5 IOMUX_PAD(0x6e0, 0x27c, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__GPIO2_13 IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7 IOMUX_PAD(0x6e0, 0x27c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 IOMUX_PAD(0x6e0, 0x27c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA1__ATA_DATA_1 IOMUX_PAD(0x6e4, 0x280, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6 IOMUX_PAD(0x6e4, 0x280, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK IOMUX_PAD(0x6e4, 0x280, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6 IOMUX_PAD(0x6e4, 0x280, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__GPIO2_14 IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8 IOMUX_PAD(0x6e4, 0x280, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 IOMUX_PAD(0x6e4, 0x280, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA2__ATA_DATA_2 IOMUX_PAD(0x6e8, 0x284, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7 IOMUX_PAD(0x6e8, 0x284, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS IOMUX_PAD(0x6e8, 0x284, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7 IOMUX_PAD(0x6e8, 0x284, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__GPIO2_15 IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA3__ATA_DATA_3 IOMUX_PAD(0x6ec, 0x288, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__ESDHC3_CLK IOMUX_PAD(0x6ec, 0x288, 1, 0x814, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x6ec, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__CSPI2_SCLK IOMUX_PAD(0x6ec, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__GPIO2_16 IOMUX_PAD(0x6ec, 0x288, 5, 0x884, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 IOMUX_PAD(0x6ec, 0x288, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 IOMUX_PAD(0x6ec, 0x288, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA4__ATA_DATA_4 IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__ESDHC3_CMD IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__GPIO2_17 IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11 IOMUX_PAD(0x6f0, 0x28c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 IOMUX_PAD(0x6f0, 0x28c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA5__ATA_DATA_5 IOMUX_PAD(0x6f4, 0x290, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__GPIO2_18 IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12 IOMUX_PAD(0x6f4, 0x290, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 IOMUX_PAD(0x6f4, 0x290, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA6__ATA_DATA_6 IOMUX_PAD(0x6f8, 0x294, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__CAN1_TXCAN IOMUX_PAD(0x6f8, 0x294, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__UART1_DTR IOMUX_PAD(0x6f8, 0x294, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__GPIO2_19 IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13 IOMUX_PAD(0x6f8, 0x294, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA7__ATA_DATA_7 IOMUX_PAD(0x6fc, 0x298, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__CAN1_RXCAN IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__UART1_DSR IOMUX_PAD(0x6fc, 0x298, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__GPIO2_20 IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14 IOMUX_PAD(0x6fc, 0x298, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA8__ATA_DATA_8 IOMUX_PAD(0x700, 0x29c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__UART3_RTS IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__UART1_RI IOMUX_PAD(0x700, 0x29c, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__GPIO2_21 IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15 IOMUX_PAD(0x700, 0x29c, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA9__ATA_DATA_9 IOMUX_PAD(0x704, 0x2a0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__UART3_CTS IOMUX_PAD(0x704, 0x2a0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__UART1_DCD IOMUX_PAD(0x704, 0x2a0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__GPIO2_22 IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16 IOMUX_PAD(0x704, 0x2a0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA10__ATA_DATA_10 IOMUX_PAD(0x708, 0x2a4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__GPIO2_23 IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17 IOMUX_PAD(0x708, 0x2a4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA11__ATA_DATA_11 IOMUX_PAD(0x70c, 0x2a8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX IOMUX_PAD(0x70c, 0x2a8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__GPIO2_24 IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18 IOMUX_PAD(0x70c, 0x2a8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA12__ATA_DATA_12 IOMUX_PAD(0x710, 0x2ac, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA12__I2C3_SCL IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA12__GPIO2_25 IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19 IOMUX_PAD(0x710, 0x2ac, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA13__ATA_DATA_13 IOMUX_PAD(0x714, 0x2b0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA13__I2C3_SDA IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA13__GPIO2_26 IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20 IOMUX_PAD(0x714, 0x2b0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA14__ATA_DATA_14 IOMUX_PAD(0x718, 0x2b4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0 IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__KPP_ROW_0 IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__GPIO2_27 IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21 IOMUX_PAD(0x718, 0x2b4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA15__ATA_DATA_15 IOMUX_PAD(0x71c, 0x2b8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1 IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__KPP_ROW_1 IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__GPIO2_28 IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22 IOMUX_PAD(0x71c, 0x2b8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_INTRQ__ATA_INTRQ IOMUX_PAD(0x720, 0x2bc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__KPP_ROW_2 IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__GPIO2_29 IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 IOMUX_PAD(0x720, 0x2bc, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN IOMUX_PAD(0x724, 0x2c0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__GPIO2_30 IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 IOMUX_PAD(0x724, 0x2c0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DMARQ__ATA_DMARQ IOMUX_PAD(0x728, 0x2c4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__KPP_COL_0 IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__GPIO2_31 IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 IOMUX_PAD(0x728, 0x2c4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 IOMUX_PAD(0x728, 0x2c4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DA0__ATA_DA_0 IOMUX_PAD(0x72c, 0x2c8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__IPU_CSI_D_5 IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__KPP_COL_1 IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__GPIO3_0 IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__IPU_DIAGB_26 IOMUX_PAD(0x72c, 0x2c8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 IOMUX_PAD(0x72c, 0x2c8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DA1__ATA_DA_1 IOMUX_PAD(0x730, 0x2cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__IPU_CSI_D_6 IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__KPP_COL_2 IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__GPIO3_1 IOMUX_PAD(0x730, 0x2cc, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__IPU_DIAGB_27 IOMUX_PAD(0x730, 0x2cc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 IOMUX_PAD(0x730, 0x2cc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DA2__ATA_DA_2 IOMUX_PAD(0x734, 0x2d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__IPU_CSI_D_7 IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__KPP_COL_3 IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__GPIO3_2 IOMUX_PAD(0x734, 0x2d0, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__IPU_DIAGB_28 IOMUX_PAD(0x734, 0x2d0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 IOMUX_PAD(0x734, 0x2d0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_MLB_CLK__MLB_MLBCLK IOMUX_PAD(0x738, 0x2d4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_MLB_CLK__GPIO3_3 IOMUX_PAD(0x738, 0x2d4, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_MLB_DAT__MLB_MLBDAT IOMUX_PAD(0x73c, 0x2d8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_MLB_DAT__GPIO3_4 IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL) + +#define MX35_PAD_MLB_SIG__MLB_MLBSIG IOMUX_PAD(0x740, 0x2dc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_MLB_SIG__GPIO3_5 IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x744, 0x2e0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__GPIO3_6 IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 IOMUX_PAD(0x744, 0x2e0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK IOMUX_PAD(0x748, 0x2e4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX IOMUX_PAD(0x748, 0x2e4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP IOMUX_PAD(0x748, 0x2e4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__GPIO3_7 IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 IOMUX_PAD(0x748, 0x2e4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x74c, 0x2e8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__UART3_RTS IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__GPIO3_8 IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK IOMUX_PAD(0x74c, 0x2e8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 IOMUX_PAD(0x74c, 0x2e8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_COL__FEC_COL IOMUX_PAD(0x750, 0x2ec, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__ESDHC1_DAT7 IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__UART3_CTS IOMUX_PAD(0x750, 0x2ec, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__CSPI2_RDY IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__GPIO3_9 IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS IOMUX_PAD(0x750, 0x2ec, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 IOMUX_PAD(0x750, 0x2ec, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0 IOMUX_PAD(0x754, 0x2f0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__PWM_PWMO IOMUX_PAD(0x754, 0x2f0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__UART3_DTR IOMUX_PAD(0x754, 0x2f0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__CSPI2_SS0 IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__GPIO3_10 IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 IOMUX_PAD(0x754, 0x2f0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 IOMUX_PAD(0x754, 0x2f0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0 IOMUX_PAD(0x758, 0x2f4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x758, 0x2f4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__UART3_DSR IOMUX_PAD(0x758, 0x2f4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__CSPI2_SS1 IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__GPIO3_11 IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 IOMUX_PAD(0x758, 0x2f4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 IOMUX_PAD(0x758, 0x2f4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x75c, 0x2f8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__UART3_RI IOMUX_PAD(0x75c, 0x2f8, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__GPIO3_12 IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS IOMUX_PAD(0x75c, 0x2f8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 IOMUX_PAD(0x75c, 0x2f8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x760, 0x2fc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__CAN2_TXCAN IOMUX_PAD(0x760, 0x2fc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__UART3_DCD IOMUX_PAD(0x760, 0x2fc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__GPIO3_13 IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__IPU_DISPB_WR IOMUX_PAD(0x760, 0x2fc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 IOMUX_PAD(0x760, 0x2fc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x764, 0x300, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__CAN2_RXCAN IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__GPIO3_14 IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD IOMUX_PAD(0x764, 0x300, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 IOMUX_PAD(0x764, 0x300, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR IOMUX_PAD(0x768, 0x304, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__GPIO3_15 IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 IOMUX_PAD(0x768, 0x304, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR IOMUX_PAD(0x76c, 0x308, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__KPP_COL_4 IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__GPIO3_16 IOMUX_PAD(0x76c, 0x308, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL) + +#define MX35_PAD_FEC_CRS__FEC_CRS IOMUX_PAD(0x770, 0x30c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__IPU_CSI_D_1 IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR IOMUX_PAD(0x770, 0x30c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__KPP_COL_5 IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__GPIO3_17 IOMUX_PAD(0x770, 0x30c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE IOMUX_PAD(0x770, 0x30c, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1 IOMUX_PAD(0x774, 0x310, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC IOMUX_PAD(0x774, 0x310, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__KPP_COL_6 IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__GPIO3_18 IOMUX_PAD(0x774, 0x310, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 IOMUX_PAD(0x774, 0x310, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1 IOMUX_PAD(0x778, 0x314, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__KPP_COL_7 IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__GPIO3_19 IOMUX_PAD(0x778, 0x314, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 IOMUX_PAD(0x778, 0x314, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2 IOMUX_PAD(0x77c, 0x318, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__KPP_ROW_4 IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__GPIO3_20 IOMUX_PAD(0x77c, 0x318, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2 IOMUX_PAD(0x780, 0x31c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__KPP_ROW_5 IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__GPIO3_21 IOMUX_PAD(0x780, 0x31c, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3 IOMUX_PAD(0x784, 0x320, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__KPP_ROW_6 IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__GPIO3_22 IOMUX_PAD(0x784, 0x320, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3 IOMUX_PAD(0x788, 0x324, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__KPP_ROW_7 IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__GPIO3_23 IOMUX_PAD(0x788, 0x324, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK IOMUX_PAD(0x78c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TEST_MODE__TCU_TEST_MODE IOMUX_PAD(0x790, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + + +#endif /* __MACH_IOMUX_MX35_H__ */ diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c new file mode 100644 index 000000000..7aa90c863 --- /dev/null +++ b/arch/arm/mach-imx/iomux-v1.c @@ -0,0 +1,187 @@ +/* + * arch/arm/plat-mxc/iomux-v1.c + * + * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH + * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix + * + * Common code for i.MX1, i.MX21 and i.MX27 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/gpio.h> + +#include <asm/mach/map.h> + +#include "hardware.h" +#include "iomux-v1.h" + +static void __iomem *imx_iomuxv1_baseaddr; +static unsigned imx_iomuxv1_numports; + +static inline unsigned long imx_iomuxv1_readl(unsigned offset) +{ + return imx_readl(imx_iomuxv1_baseaddr + offset); +} + +static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset) +{ + imx_writel(val, imx_iomuxv1_baseaddr + offset); +} + +static inline void imx_iomuxv1_rmwl(unsigned offset, + unsigned long mask, unsigned long value) +{ + unsigned long reg = imx_iomuxv1_readl(offset); + + reg &= ~mask; + reg |= value; + + imx_iomuxv1_writel(reg, offset); +} + +static inline void imx_iomuxv1_set_puen( + unsigned int port, unsigned int pin, int on) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0); +} + +static inline void imx_iomuxv1_set_ddir( + unsigned int port, unsigned int pin, int out) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0); +} + +static inline void imx_iomuxv1_set_gpr( + unsigned int port, unsigned int pin, int af) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0); +} + +static inline void imx_iomuxv1_set_gius( + unsigned int port, unsigned int pin, int inuse) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0); +} + +static inline void imx_iomuxv1_set_ocr( + unsigned int port, unsigned int pin, unsigned int ocr) +{ + unsigned long shift = (pin & 0xf) << 1; + unsigned long mask = 3 << shift; + unsigned long value = ocr << shift; + unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port); + + imx_iomuxv1_rmwl(offset, mask, value); +} + +static inline void imx_iomuxv1_set_iconfa( + unsigned int port, unsigned int pin, unsigned int aout) +{ + unsigned long shift = (pin & 0xf) << 1; + unsigned long mask = 3 << shift; + unsigned long value = aout << shift; + unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port); + + imx_iomuxv1_rmwl(offset, mask, value); +} + +static inline void imx_iomuxv1_set_iconfb( + unsigned int port, unsigned int pin, unsigned int bout) +{ + unsigned long shift = (pin & 0xf) << 1; + unsigned long mask = 3 << shift; + unsigned long value = bout << shift; + unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port); + + imx_iomuxv1_rmwl(offset, mask, value); +} + +int mxc_gpio_mode(int gpio_mode) +{ + unsigned int pin = gpio_mode & GPIO_PIN_MASK; + unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; + unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; + unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3; + unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3; + + if (port >= imx_iomuxv1_numports) + return -EINVAL; + + /* Pullup enable */ + imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN); + + /* Data direction */ + imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT); + + /* Primary / alternate function */ + imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF); + + /* use as gpio? */ + imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF))); + + imx_iomuxv1_set_ocr(port, pin, ocr); + + imx_iomuxv1_set_iconfa(port, pin, aout); + + imx_iomuxv1_set_iconfb(port, pin, bout); + + return 0; +} + +static int imx_iomuxv1_setup_multiple(const int *list, unsigned count) +{ + size_t i; + int ret = 0; + + for (i = 0; i < count; ++i) { + ret = mxc_gpio_mode(list[i]); + + if (ret) + return ret; + } + + return ret; +} + +int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, + const char *label) +{ + int ret; + + ret = imx_iomuxv1_setup_multiple(pin_list, count); + return ret; +} + +int __init imx_iomuxv1_init(void __iomem *base, int numports) +{ + imx_iomuxv1_baseaddr = base; + imx_iomuxv1_numports = numports; + + return 0; +} diff --git a/arch/arm/mach-imx/iomux-v1.h b/arch/arm/mach-imx/iomux-v1.h new file mode 100644 index 000000000..02651a40f --- /dev/null +++ b/arch/arm/mach-imx/iomux-v1.h @@ -0,0 +1,94 @@ +/* + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_V1_H__ +#define __MACH_IOMUX_V1_H__ + +/* +* GPIO Module and I/O Multiplexer +* x = 0..3 for reg_A, reg_B, reg_C, reg_D +*/ +#define MXC_DDIR(x) (0x00 + ((x) << 8)) +#define MXC_OCR1(x) (0x04 + ((x) << 8)) +#define MXC_OCR2(x) (0x08 + ((x) << 8)) +#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) +#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) +#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) +#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) +#define MXC_DR(x) (0x1c + ((x) << 8)) +#define MXC_GIUS(x) (0x20 + ((x) << 8)) +#define MXC_SSR(x) (0x24 + ((x) << 8)) +#define MXC_ICR1(x) (0x28 + ((x) << 8)) +#define MXC_ICR2(x) (0x2c + ((x) << 8)) +#define MXC_IMR(x) (0x30 + ((x) << 8)) +#define MXC_ISR(x) (0x34 + ((x) << 8)) +#define MXC_GPR(x) (0x38 + ((x) << 8)) +#define MXC_SWR(x) (0x3c + ((x) << 8)) +#define MXC_PUEN(x) (0x40 + ((x) << 8)) + +#define MX1_NUM_GPIO_PORT 4 +#define MX21_NUM_GPIO_PORT 6 +#define MX27_NUM_GPIO_PORT 6 + +#define GPIO_PIN_MASK 0x1f + +#define GPIO_PORT_SHIFT 5 +#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) + +#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) +#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) +#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) +#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) +#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) +#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) + +#define GPIO_OUT (1 << 8) +#define GPIO_IN (0 << 8) +#define GPIO_PUEN (1 << 9) + +#define GPIO_PF (1 << 10) +#define GPIO_AF (1 << 11) + +#define GPIO_OCR_SHIFT 12 +#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) +#define GPIO_AIN (0 << GPIO_OCR_SHIFT) +#define GPIO_BIN (1 << GPIO_OCR_SHIFT) +#define GPIO_CIN (2 << GPIO_OCR_SHIFT) +#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) + +#define GPIO_AOUT_SHIFT 14 +#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) + +#define GPIO_BOUT_SHIFT 16 +#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) + +extern int mxc_gpio_mode(int gpio_mode); +extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, + const char *label); + +extern int imx_iomuxv1_init(void __iomem *base, int numports); + +#endif /* __MACH_IOMUX_V1_H__ */ diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c new file mode 100644 index 000000000..ca59d5f2e --- /dev/null +++ b/arch/arm/mach-imx/iomux-v3.c @@ -0,0 +1,78 @@ +/* + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/gpio.h> + +#include <asm/mach/map.h> + +#include "hardware.h" +#include "iomux-v3.h" + +static void __iomem *base; + +/* + * configures a single pad in the iomuxer + */ +int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad) +{ + u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT; + u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT; + u32 sel_input_ofs = (pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT; + u32 sel_input = (pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT; + u32 pad_ctrl_ofs = (pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT; + u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT; + + if (mux_ctrl_ofs) + imx_writel(mux_mode, base + mux_ctrl_ofs); + + if (sel_input_ofs) + imx_writel(sel_input, base + sel_input_ofs); + + if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) + imx_writel(pad_ctrl, base + pad_ctrl_ofs); + + return 0; +} + +int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list, + unsigned count) +{ + const iomux_v3_cfg_t *p = pad_list; + int i; + int ret; + + for (i = 0; i < count; i++) { + ret = mxc_iomux_v3_setup_pad(*p); + if (ret) + return ret; + p++; + } + return 0; +} + +void mxc_iomux_v3_init(void __iomem *iomux_v3_base) +{ + base = iomux_v3_base; +} diff --git a/arch/arm/mach-imx/iomux-v3.h b/arch/arm/mach-imx/iomux-v3.h new file mode 100644 index 000000000..f79e165a3 --- /dev/null +++ b/arch/arm/mach-imx/iomux-v3.h @@ -0,0 +1,143 @@ +/* + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IOMUX_V3_H__ +#define __MACH_IOMUX_V3_H__ + +/* + * build IOMUX_PAD structure + * + * This iomux scheme is based around pads, which are the physical balls + * on the processor. + * + * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls + * things like driving strength and pullup/pulldown. + * - Each pad can have but not necessarily does have an output routing register + * (IOMUXC_SW_MUX_CTL_PAD_x). + * - Each pad can have but not necessarily does have an input routing register + * (IOMUXC_x_SELECT_INPUT) + * + * The three register sets do not have a fixed offset to each other, + * hence we order this table by pad control registers (which all pads + * have) and put the optional i/o routing registers into additional + * fields. + * + * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named + * GPIO_<unit>_<num> + * + * IOMUX/PAD Bit field definitions + * + * MUX_CTRL_OFS: 0..11 (12) + * PAD_CTRL_OFS: 12..23 (12) + * SEL_INPUT_OFS: 24..35 (12) + * MUX_MODE + SION: 36..40 (5) + * PAD_CTRL + NO_PAD_CTRL: 41..57 (17) + * SEL_INP: 58..61 (4) + * reserved: 63 (1) +*/ + +typedef u64 iomux_v3_cfg_t; + +#define MUX_CTRL_OFS_SHIFT 0 +#define MUX_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT) +#define MUX_PAD_CTRL_OFS_SHIFT 12 +#define MUX_PAD_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_PAD_CTRL_OFS_SHIFT) +#define MUX_SEL_INPUT_OFS_SHIFT 24 +#define MUX_SEL_INPUT_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_SEL_INPUT_OFS_SHIFT) + +#define MUX_MODE_SHIFT 36 +#define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT) +#define MUX_PAD_CTRL_SHIFT 41 +#define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT) +#define MUX_SEL_INPUT_SHIFT 58 +#define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT) + +#define MUX_PAD_CTRL(x) ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT) + +#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _sel_input_ofs, \ + _sel_input, _pad_ctrl) \ + (((iomux_v3_cfg_t)(_mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \ + ((iomux_v3_cfg_t)(_mux_mode) << MUX_MODE_SHIFT) | \ + ((iomux_v3_cfg_t)(_pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \ + ((iomux_v3_cfg_t)(_pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \ + ((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \ + ((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT)) + +#define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(pad)) +/* + * Use to set PAD control + */ + +#define NO_PAD_CTRL (1 << 16) +#define PAD_CTL_DVS (1 << 13) +#define PAD_CTL_HYS (1 << 8) + +#define PAD_CTL_PKE (1 << 7) +#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE) +#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) + +#define PAD_CTL_ODE (1 << 3) + +#define PAD_CTL_DSE_LOW (0 << 1) +#define PAD_CTL_DSE_MED (1 << 1) +#define PAD_CTL_DSE_HIGH (2 << 1) +#define PAD_CTL_DSE_MAX (3 << 1) + +#define PAD_CTL_SRE_FAST (1 << 0) +#define PAD_CTL_SRE_SLOW (0 << 0) + +#define IOMUX_CONFIG_SION (0x1 << 4) + +#define MX51_NUM_GPIO_PORT 4 + +#define GPIO_PIN_MASK 0x1f + +#define GPIO_PORT_SHIFT 5 +#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) + +#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) +#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) +#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) +#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) +#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) +#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) + +/* + * setups a single pad in the iomuxer + */ +int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad); + +/* + * setups multiple pads + * convenient way to call the above function with tables + */ +int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list, + unsigned count); + +/* + * Initialise the iomux controller + */ +void mxc_iomux_v3_init(void __iomem *iomux_v3_base); + +#endif /* __MACH_IOMUX_V3_H__*/ + diff --git a/arch/arm/mach-imx/irq-common.c b/arch/arm/mach-imx/irq-common.c new file mode 100644 index 000000000..210d36eba --- /dev/null +++ b/arch/arm/mach-imx/irq-common.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) BitBox Ltd 2010 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/module.h> +#include <linux/irq.h> +#include <linux/platform_data/asoc-imx-ssi.h> + +#include "irq-common.h" + +int mxc_set_irq_fiq(unsigned int irq, unsigned int type) +{ + struct irq_chip_generic *gc; + struct mxc_extra_irq *exirq; + int ret; + + ret = -ENOSYS; + + gc = irq_get_chip_data(irq); + if (gc && gc->private) { + exirq = gc->private; + if (exirq->set_irq_fiq) { + struct irq_data *d = irq_get_irq_data(irq); + ret = exirq->set_irq_fiq(irqd_to_hwirq(d), type); + } + } + + return ret; +} +EXPORT_SYMBOL(mxc_set_irq_fiq); diff --git a/arch/arm/mach-imx/irq-common.h b/arch/arm/mach-imx/irq-common.h new file mode 100644 index 000000000..6e3175dc0 --- /dev/null +++ b/arch/arm/mach-imx/irq-common.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) BitBox Ltd 2010 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __PLAT_MXC_IRQ_COMMON_H__ +#define __PLAT_MXC_IRQ_COMMON_H__ + +/* all normal IRQs can be FIQs */ +#define FIQ_START 0 + +struct mxc_extra_irq +{ + int (*set_irq_fiq)(unsigned int irq, unsigned int type); +}; + +#endif diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c new file mode 100644 index 000000000..17a97ba2c --- /dev/null +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -0,0 +1,576 @@ +/* + * armadillo5x0.c + * + * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + * updates in http://alberdroid.blogspot.com/ + * + * Based on Atmark Techno, Inc. armadillo 500 BSP 2008 + * Based on mx31ads.c and pcm037.c Great Work! + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/io.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/delay.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/memory.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "devices-imx31.h" +#include "crmregs-imx3.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" + +static int armadillo5x0_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* UART2 */ + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + /* LAN9118_IRQ */ + IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + /* Framebuffer */ + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_DRDY0__DRDY0, + IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/ + /* I2C2 */ + MX31_PIN_CSPI2_MOSI__SCL, + MX31_PIN_CSPI2_MISO__SDA, + /* OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, + MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, + MX31_PIN_USBOTG_STP__USBOTG_STP, + /* USB host 2 */ + IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC), +}; + +/* USB */ + +#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4) +#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6) +#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3) + +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int usbotg_init(struct platform_device *pdev) +{ + int err; + + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); + + /* Chip already enabled by hardware */ + /* OTG phy reset*/ + err = gpio_request(OTG_RESET, "USB-OTG-RESET"); + if (err) { + pr_err("Failed to request the usb otg reset gpio\n"); + return err; + } + + err = gpio_direction_output(OTG_RESET, 1/*HIGH*/); + if (err) { + pr_err("Failed to reset the usb otg phy\n"); + goto otg_free_reset; + } + + gpio_set_value(OTG_RESET, 0/*LOW*/); + mdelay(5); + gpio_set_value(OTG_RESET, 1/*HIGH*/); + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_DIFF_UNI); + +otg_free_reset: + gpio_free(OTG_RESET); + return err; +} + +static int usbh2_init(struct platform_device *pdev) +{ + int err; + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); + + mxc_iomux_set_gpr(MUX_PGP_UH2, true); + + + /* Enable the chip */ + err = gpio_request(USBH2_CS, "USB-H2-CS"); + if (err) { + pr_err("Failed to request the usb host 2 CS gpio\n"); + return err; + } + + err = gpio_direction_output(USBH2_CS, 0/*Enabled*/); + if (err) { + pr_err("Failed to drive the usb host 2 CS gpio\n"); + goto h2_free_cs; + } + + /* H2 phy reset*/ + err = gpio_request(USBH2_RESET, "USB-H2-RESET"); + if (err) { + pr_err("Failed to request the usb host 2 reset gpio\n"); + goto h2_free_cs; + } + + err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/); + if (err) { + pr_err("Failed to reset the usb host 2 phy\n"); + goto h2_free_reset; + } + + gpio_set_value(USBH2_RESET, 0/*LOW*/); + mdelay(5); + gpio_set_value(USBH2_RESET, 1/*HIGH*/); + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_DIFF_UNI); + +h2_free_reset: + gpio_free(USBH2_RESET); +h2_free_cs: + gpio_free(USBH2_CS); + return err; +} + +static struct mxc_usbh_platform_data usbotg_pdata __initdata = { + .init = usbotg_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, +}; + +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = usbh2_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, +}; + +/* RTC over I2C*/ +#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4) + +static struct i2c_board_info armadillo5x0_i2c_rtc = { + I2C_BOARD_INFO("s35390a", 0x30), +}; + +/* GPIO BUTTONS */ +static struct gpio_keys_button armadillo5x0_buttons[] = { + { + .code = KEY_ENTER, /*28*/ + .gpio = IOMUX_TO_GPIO(MX31_PIN_SCLK0), + .active_low = 1, + .desc = "menu", + .wakeup = 1, + }, { + .code = KEY_BACK, /*158*/ + .gpio = IOMUX_TO_GPIO(MX31_PIN_SRST0), + .active_low = 1, + .desc = "back", + .wakeup = 1, + } +}; + +static const struct gpio_keys_platform_data + armadillo5x0_button_data __initconst = { + .buttons = armadillo5x0_buttons, + .nbuttons = ARRAY_SIZE(armadillo5x0_buttons), +}; + +/* + * NAND Flash + */ +static const struct mxc_nand_platform_data +armadillo5x0_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, +}; + +/* + * MTD NOR Flash + */ +static struct mtd_partition armadillo5x0_nor_flash_partitions[] = { + { + .name = "nor.bootloader", + .offset = 0x00000000, + .size = 4*32*1024, + }, { + .name = "nor.kernel", + .offset = MTDPART_OFS_APPEND, + .size = 16*128*1024, + }, { + .name = "nor.userland", + .offset = MTDPART_OFS_APPEND, + .size = 110*128*1024, + }, { + .name = "nor.config", + .offset = MTDPART_OFS_APPEND, + .size = 1*128*1024, + }, +}; + +static const struct physmap_flash_data + armadillo5x0_nor_flash_pdata __initconst = { + .width = 2, + .parts = armadillo5x0_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions), +}; + +static const struct resource armadillo5x0_nor_flash_resource __initconst = { + .flags = IORESOURCE_MEM, + .start = MX31_CS0_BASE_ADDR, + .end = MX31_CS0_BASE_ADDR + SZ_64M - 1, +}; + +/* + * FB support + */ +static const struct fb_videomode fb_modedb[] = { + { /* 640x480 @ 60 Hz */ + .name = "CRT-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 35, + .right_margin = 115, + .upper_margin = 43, + .lower_margin = 1, + .hsync_len = 10, + .vsync_len = 1, + .sync = FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, {/* 800x600 @ 56 Hz */ + .name = "CRT-SVGA", + .refresh = 56, + .xres = 800, + .yres = 600, + .pixclock = 30000, + .left_margin = 30, + .right_margin = 108, + .upper_margin = 13, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 1, + .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT | + FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct mx3fb_platform_data mx3fb_pdata __initdata = { + .name = "CRT-VGA", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +/* + * SDHC 1 + * MMC support + */ +static int armadillo5x0_sdhc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); +} + +static int armadillo5x0_sdhc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + int gpio_det, gpio_wp; + + gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK); + gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B); + + ret = gpio_request(gpio_det, "sdhc-card-detect"); + if (ret) + return ret; + + gpio_direction_input(gpio_det); + + ret = gpio_request(gpio_wp, "sdhc-write-protect"); + if (ret) + goto err_gpio_free; + + gpio_direction_input(gpio_wp); + + /* When supported the trigger type have to be BOTH */ + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), + detect_irq, IRQF_TRIGGER_FALLING, + "sdhc-detect", data); + + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(gpio_wp); + +err_gpio_free: + gpio_free(gpio_det); + + return ret; + +} + +static void armadillo5x0_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), data); + gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)); + gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); +} + +static const struct imxmmc_platform_data sdhc_pdata __initconst = { + .get_ro = armadillo5x0_sdhc1_get_ro, + .init = armadillo5x0_sdhc1_init, + .exit = armadillo5x0_sdhc1_exit, +}; + +/* + * SMSC 9118 + * Network support + */ +static struct resource armadillo5x0_smc911x_resources[] = { + { + .start = MX31_CS3_BASE_ADDR, + .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + /* irq number is run-time assigned */ + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config smsc911x_info = { + .flags = SMSC911X_USE_16BIT, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, +}; + +static struct platform_device armadillo5x0_smc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources), + .resource = armadillo5x0_smc911x_resources, + .dev = { + .platform_data = &smsc911x_info, + }, +}; + +/* UART device data */ +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *devices[] __initdata = { + &armadillo5x0_smc911x_device, +}; + +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + +/* + * Perform board specific initializations + */ +static void __init armadillo5x0_init(void) +{ + imx31_soc_init(); + + mxc_iomux_setup_multiple_pins(armadillo5x0_pins, + ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); + + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + + imx31_add_imx_i2c1(NULL); + + /* Register UART */ + imx31_add_imx_uart0(&uart_pdata); + imx31_add_imx_uart1(&uart_pdata); + + /* Register FB */ + imx31_add_ipu_core(); + imx31_add_mx3_sdc_fb(&mx3fb_pdata); + + /* Register NOR Flash */ + platform_device_register_resndata(NULL, "physmap-flash", -1, + &armadillo5x0_nor_flash_resource, 1, + &armadillo5x0_nor_flash_pdata, + sizeof(armadillo5x0_nor_flash_pdata)); + + /* Register NAND Flash */ + imx31_add_mxc_nand(&armadillo5x0_nand_board_info); + + /* set NAND page size to 2k if not configured via boot mode pins */ + imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30), + mx3_ccm_base + MXC_CCM_RCSR); +} + +static void __init armadillo5x0_late(void) +{ + armadillo5x0_smc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + armadillo5x0_smc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + platform_add_devices(devices, ARRAY_SIZE(devices)); + + imx_add_gpio_keys(&armadillo5x0_button_data); + + /* SMSC9118 IRQ pin */ + gpio_direction_input(MX31_PIN_GPIO1_0); + + /* Register SDHC */ + imx31_add_mxc_mmc(0, &sdhc_pdata); + + /* RTC */ + /* Get RTC IRQ and register the chip */ + if (!gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc")) { + if (!gpio_direction_input(ARMADILLO5X0_RTC_GPIO)) + armadillo5x0_i2c_rtc.irq = + gpio_to_irq(ARMADILLO5X0_RTC_GPIO); + else + gpio_free(ARMADILLO5X0_RTC_GPIO); + } + + if (armadillo5x0_i2c_rtc.irq == 0) + pr_warn("armadillo5x0_init: failed to get RTC IRQ\n"); + i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1); + + /* USB */ + usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbotg_pdata.otg) + imx31_add_mxc_ehci_otg(&usbotg_pdata); + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbh2_pdata.otg) + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); +} + +static void __init armadillo5x0_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +MACHINE_START(ARMADILLO5X0, "Armadillo-500") + /* Maintainer: Alberto Panizzo */ + .atag_offset = 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .init_time = armadillo5x0_timer_init, + .init_machine = armadillo5x0_init, + .init_late = armadillo5x0_late, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c new file mode 100644 index 000000000..c97d7cb39 --- /dev/null +++ b/arch/arm/mach-imx/mach-bug.c @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach/time.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include "common.h" +#include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static const unsigned int bug_pins[] __initconst = { + MX31_PIN_PC_RST__CTS5, + MX31_PIN_PC_VS2__RTS5, + MX31_PIN_PC_BVD2__TXD5, + MX31_PIN_PC_BVD1__RXD5, +}; + +static void __init bug_board_init(void) +{ + imx31_soc_init(); + + mxc_iomux_setup_multiple_pins(bug_pins, + ARRAY_SIZE(bug_pins), "uart-4"); + imx31_add_imx_uart4(&uart_pdata); +} + +static void __init bug_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +MACHINE_START(BUG, "BugLabs BUGBase") + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .init_time = bug_timer_init, + .init_machine = bug_board_init, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx1.c b/arch/arm/mach-imx/mach-imx1.c new file mode 100644 index 000000000..3a8406e45 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx1.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "hardware.h" + +#define MX1_AVIC_ADDR 0x00223000 + +static void __init imx1_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX1); +} + +static void __init imx1_init_irq(void) +{ + void __iomem *avic_addr; + + avic_addr = ioremap(MX1_AVIC_ADDR, SZ_4K); + WARN_ON(!avic_addr); + + mxc_init_irq(avic_addr); +} + +static const char * const imx1_dt_board_compat[] __initconst = { + "fsl,imx1", + NULL +}; + +DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)") + .init_early = imx1_init_early, + .init_irq = imx1_init_irq, + .dt_compat = imx1_dt_board_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c new file mode 100644 index 000000000..353b86e38 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx25.c @@ -0,0 +1,53 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/irq.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include "common.h" +#include "hardware.h" + +static void __init imx25_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX25); +} + +static void __init imx25_dt_init(void) +{ + imx_aips_allow_unprivileged_access("fsl,imx25-aips"); +} + +static void __init mx25_init_irq(void) +{ + struct device_node *np; + void __iomem *avic_base; + + np = of_find_compatible_node(NULL, NULL, "fsl,avic"); + avic_base = of_iomap(np, 0); + BUG_ON(!avic_base); + mxc_init_irq(avic_base); +} + +static const char * const imx25_dt_board_compat[] __initconst = { + "fsl,imx25", + NULL +}; + +DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") + .init_early = imx25_init_early, + .init_machine = imx25_dt_init, + .init_late = imx25_pm_init, + .init_irq = mx25_init_irq, + .dt_compat = imx25_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c new file mode 100644 index 000000000..5169dfba9 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -0,0 +1,611 @@ +/* + * mach-imx27_visstrim_m10.c + * + * Copyright 2010 Javier Martin <javier.martin@vista-silicon.com> + * + * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/platform_data/pca953x.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/leds.h> +#include <linux/platform_data/asoc-mx27vis.h> +#include <media/soc_camera.h> +#include <sound/tlv320aic32x4.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/system_info.h> +#include <asm/memblock.h> + +#include "common.h" +#include "devices-imx27.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx27.h" + +#define TVP5150_RSTN (GPIO_PORTC + 18) +#define TVP5150_PWDN (GPIO_PORTC + 19) +#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) +#define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25) + +#define VERSION_MASK 0x7 +#define MOTHERBOARD_SHIFT 4 +#define EXPBOARD_SHIFT 0 + +#define MOTHERBOARD_BIT2 (GPIO_PORTD + 31) +#define MOTHERBOARD_BIT1 (GPIO_PORTD + 30) +#define MOTHERBOARD_BIT0 (GPIO_PORTD + 29) + +#define EXPBOARD_BIT2 (GPIO_PORTD + 25) +#define EXPBOARD_BIT1 (GPIO_PORTD + 27) +#define EXPBOARD_BIT0 (GPIO_PORTD + 28) + +#define AMP_GAIN_0 (GPIO_PORTF + 9) +#define AMP_GAIN_1 (GPIO_PORTF + 8) +#define AMP_MUTE_SDL (GPIO_PORTE + 5) +#define AMP_MUTE_SDR (GPIO_PORTF + 7) + +static const int visstrim_m10_pins[] __initconst = { + /* UART1 (console) */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* SSI1 */ + PC20_PF_SSI1_FS, + PC21_PF_SSI1_RXD, + PC22_PF_SSI1_TXD, + PC23_PF_SSI1_CLK, + /* SDHC1 */ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + /* Both I2Cs */ + PD17_PF_I2C_DATA, + PD18_PF_I2C_CLK, + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* USB OTG */ + OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT, + PC9_PF_USBOTG_DATA0, + PC11_PF_USBOTG_DATA1, + PC10_PF_USBOTG_DATA2, + PC13_PF_USBOTG_DATA3, + PC12_PF_USBOTG_DATA4, + PC7_PF_USBOTG_DATA5, + PC8_PF_USBOTG_DATA6, + PE25_PF_USBOTG_DATA7, + PE24_PF_USBOTG_CLK, + PE2_PF_USBOTG_DIR, + PE0_PF_USBOTG_NXT, + PE1_PF_USBOTG_STP, + PB23_PF_USB_PWR, + PB24_PF_USB_OC, + /* CSI */ + TVP5150_RSTN | GPIO_GPIO | GPIO_OUT, + TVP5150_PWDN | GPIO_GPIO | GPIO_OUT, + PB10_PF_CSI_D0, + PB11_PF_CSI_D1, + PB12_PF_CSI_D2, + PB13_PF_CSI_D3, + PB14_PF_CSI_D4, + PB15_PF_CSI_MCLK, + PB16_PF_CSI_PIXCLK, + PB17_PF_CSI_D5, + PB18_PF_CSI_D6, + PB19_PF_CSI_D7, + PB20_PF_CSI_VSYNC, + PB21_PF_CSI_HSYNC, + /* mother board version */ + MOTHERBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + MOTHERBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + MOTHERBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + /* expansion board version */ + EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + /* Audio AMP control */ + AMP_GAIN_0 | GPIO_GPIO | GPIO_OUT, + AMP_GAIN_1 | GPIO_GPIO | GPIO_OUT, + AMP_MUTE_SDL | GPIO_GPIO | GPIO_OUT, + AMP_MUTE_SDR | GPIO_GPIO | GPIO_OUT, +}; + +static struct gpio visstrim_m10_version_gpios[] = { + { EXPBOARD_BIT0, GPIOF_IN, "exp-version-0" }, + { EXPBOARD_BIT1, GPIOF_IN, "exp-version-1" }, + { EXPBOARD_BIT2, GPIOF_IN, "exp-version-2" }, + { MOTHERBOARD_BIT0, GPIOF_IN, "mother-version-0" }, + { MOTHERBOARD_BIT1, GPIOF_IN, "mother-version-1" }, + { MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" }, +}; + +static const struct gpio visstrim_m10_gpios[] __initconst = { + { + .gpio = TVP5150_RSTN, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH, + .label = "tvp5150_rstn", + }, + { + .gpio = TVP5150_PWDN, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, + .label = "tvp5150_pwdn", + }, + { + .gpio = OTG_PHY_CS_GPIO, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, + .label = "usbotg_cs", + }, + { + .gpio = AMP_GAIN_0, + .flags = GPIOF_DIR_OUT, + .label = "amp-gain-0", + }, + { + .gpio = AMP_GAIN_1, + .flags = GPIOF_DIR_OUT, + .label = "amp-gain-1", + }, + { + .gpio = AMP_MUTE_SDL, + .flags = GPIOF_DIR_OUT, + .label = "amp-mute-sdl", + }, + { + .gpio = AMP_MUTE_SDR, + .flags = GPIOF_DIR_OUT, + .label = "amp-mute-sdr", + }, +}; + +/* Camera */ +static int visstrim_camera_power(struct device *dev, int on) +{ + gpio_set_value(TVP5150_PWDN, on); + + return 0; +}; + +static int visstrim_camera_reset(struct device *dev) +{ + gpio_set_value(TVP5150_RSTN, 0); + ndelay(500); + gpio_set_value(TVP5150_RSTN, 1); + + return 0; +}; + +static struct i2c_board_info visstrim_i2c_camera = { + I2C_BOARD_INFO("tvp5150", 0x5d), +}; + +static struct soc_camera_link iclink_tvp5150 = { + .bus_id = 0, + .board_info = &visstrim_i2c_camera, + .i2c_adapter_id = 0, + .power = visstrim_camera_power, + .reset = visstrim_camera_reset, +}; + +static struct mx2_camera_platform_data visstrim_camera = { + .flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE | + MX2_CAMERA_PCLK_SAMPLE_RISING, + .clk = 100000, +}; + +static phys_addr_t mx2_camera_base __initdata; +#define MX2_CAMERA_BUF_SIZE SZ_8M + +static void __init visstrim_analog_camera_init(void) +{ + struct platform_device *pdev; + + gpio_set_value(TVP5150_PWDN, 1); + ndelay(1); + gpio_set_value(TVP5150_RSTN, 0); + ndelay(500); + gpio_set_value(TVP5150_RSTN, 1); + ndelay(200000); + + pdev = imx27_add_mx2_camera(&visstrim_camera); + if (IS_ERR(pdev)) + return; + + dma_declare_coherent_memory(&pdev->dev, mx2_camera_base, + mx2_camera_base, MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_EXCLUSIVE); +} + +static void __init visstrim_reserve(void) +{ + /* reserve 4 MiB for mx2-camera */ + mx2_camera_base = arm_memblock_steal(3 * MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE); +} + +/* GPIOs used as events for applications */ +static struct gpio_keys_button visstrim_gpio_keys[] = { + { + .type = EV_KEY, + .code = KEY_RESTART, + .gpio = (GPIO_PORTC + 15), + .desc = "Default config", + .active_low = 0, + .wakeup = 1, + }, + { + .type = EV_KEY, + .code = KEY_RECORD, + .gpio = (GPIO_PORTF + 14), + .desc = "Record", + .active_low = 0, + .wakeup = 1, + }, + { + .type = EV_KEY, + .code = KEY_STOP, + .gpio = (GPIO_PORTF + 13), + .desc = "Stop", + .active_low = 0, + .wakeup = 1, + } +}; + +static const struct gpio_keys_platform_data + visstrim_gpio_keys_platform_data __initconst = { + .buttons = visstrim_gpio_keys, + .nbuttons = ARRAY_SIZE(visstrim_gpio_keys), +}; + +/* led */ +static const struct gpio_led visstrim_m10_leds[] __initconst = { + { + .name = "visstrim:ld0", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 29), + }, + { + .name = "visstrim:ld1", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 24), + }, + { + .name = "visstrim:ld2", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 28), + }, + { + .name = "visstrim:ld3", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 25), + }, +}; + +static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = { + .leds = visstrim_m10_leds, + .num_leds = ARRAY_SIZE(visstrim_m10_leds), +}; + +/* Visstrim_SM10 has a microSD slot connected to sdhc1 */ +static int visstrim_m10_sdhc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + + ret = request_irq(gpio_to_irq(SDHC1_IRQ_GPIO), detect_irq, + IRQF_TRIGGER_FALLING, "mmc-detect", data); + return ret; +} + +static void visstrim_m10_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC1_IRQ_GPIO), data); +} + +static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = { + .init = visstrim_m10_sdhc1_init, + .exit = visstrim_m10_sdhc1_exit, +}; + +/* Visstrim_SM10 NOR flash */ +static struct physmap_flash_data visstrim_m10_flash_data = { + .width = 2, +}; + +static struct resource visstrim_m10_flash_resource = { + .start = 0xc0000000, + .end = 0xc0000000 + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device visstrim_m10_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &visstrim_m10_flash_data, + }, + .num_resources = 1, + .resource = &visstrim_m10_flash_resource, +}; + +static struct platform_device *platform_devices[] __initdata = { + &visstrim_m10_nor_mtd_device, +}; + +/* Visstrim_M10 uses UART0 as console */ +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* I2C */ +static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = { + .bitrate = 100000, +}; + +static struct pca953x_platform_data visstrim_m10_pca9555_pdata = { + .gpio_base = 240, /* After MX27 internal GPIOs */ + .invert = 0, +}; + +static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = { + .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN | + AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE | + AIC32X4_PWR_AIC32X4_LDO_ENABLE | + AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 | + AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED, + .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K | + AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K, + .swapdacs = false, +}; + +static struct i2c_board_info visstrim_m10_i2c_devices[] = { + { + I2C_BOARD_INFO("pca9555", 0x20), + .platform_data = &visstrim_m10_pca9555_pdata, + }, + { + I2C_BOARD_INFO("tlv320aic32x4", 0x18), + .platform_data = &visstrim_m10_aic32x4_pdata, + }, + { + I2C_BOARD_INFO("m41t00", 0x68), + } +}; + +/* USB OTG */ +static int otg_phy_init(struct platform_device *pdev) +{ + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} + +static const struct mxc_usbh_platform_data +visstrim_m10_usbotg_pdata __initconst = { + .init = otg_phy_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, +}; + +/* SSI */ +static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = { + .flags = IMX_SSI_DMA | IMX_SSI_SYN, +}; + +/* coda */ + +static void __init visstrim_coda_init(void) +{ + struct platform_device *pdev; + + pdev = imx27_add_coda(); + dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base + MX2_CAMERA_BUF_SIZE, + mx2_camera_base + MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_EXCLUSIVE); +} + +/* DMA deinterlace */ +static struct platform_device visstrim_deinterlace = { + .name = "m2m-deinterlace", + .id = 0, +}; + +static void __init visstrim_deinterlace_init(void) +{ + int ret = -ENOMEM; + struct platform_device *pdev = &visstrim_deinterlace; + + ret = platform_device_register(pdev); + + dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE, + mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_EXCLUSIVE); +} + +/* Emma-PrP for format conversion */ +static void __init visstrim_emmaprp_init(void) +{ + struct platform_device *pdev; + int ret; + + pdev = imx27_add_mx2_emmaprp(); + if (IS_ERR(pdev)) + return; + + /* + * Use the same memory area as the analog camera since both + * devices are, by nature, exclusive. + */ + ret = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base, mx2_camera_base, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_EXCLUSIVE); + if (ret) + pr_err("Failed to declare memory for emmaprp\n"); +} + +/* Audio */ +static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = { + .amp_gain0_gpio = AMP_GAIN_0, + .amp_gain1_gpio = AMP_GAIN_1, + .amp_mutel_gpio = AMP_MUTE_SDL, + .amp_muter_gpio = AMP_MUTE_SDR, +}; + +static void __init visstrim_m10_revision(void) +{ + int exp_version = 0; + int mo_version = 0; + int ret; + + ret = gpio_request_array(visstrim_m10_version_gpios, + ARRAY_SIZE(visstrim_m10_version_gpios)); + if (ret) { + pr_err("Failed to request version gpios"); + return; + } + + /* Get expansion board version (negative logic) */ + exp_version |= !gpio_get_value(EXPBOARD_BIT2) << 2; + exp_version |= !gpio_get_value(EXPBOARD_BIT1) << 1; + exp_version |= !gpio_get_value(EXPBOARD_BIT0); + + /* Get mother board version (negative logic) */ + mo_version |= !gpio_get_value(MOTHERBOARD_BIT2) << 2; + mo_version |= !gpio_get_value(MOTHERBOARD_BIT1) << 1; + mo_version |= !gpio_get_value(MOTHERBOARD_BIT0); + + system_rev = 0x27000; + system_rev |= (mo_version << MOTHERBOARD_SHIFT); + system_rev |= (exp_version << EXPBOARD_SHIFT); +} + +static void __init visstrim_m10_board_init(void) +{ + int ret; + + imx27_soc_init(); + visstrim_m10_revision(); + + ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins, + ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10"); + if (ret) + pr_err("Failed to setup pins (%d)\n", ret); + + imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); + imx27_add_imx_uart0(&uart_pdata); + + imx27_add_imx_i2c(0, &visstrim_m10_i2c_data); + imx27_add_imx_i2c(1, &visstrim_m10_i2c_data); + i2c_register_board_info(0, visstrim_m10_i2c_devices, + ARRAY_SIZE(visstrim_m10_i2c_devices)); + + imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata); + imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata); + imx27_add_fec(NULL); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init visstrim_m10_late_init(void) +{ + int mo_version, ret; + + ret = gpio_request_array(visstrim_m10_gpios, + ARRAY_SIZE(visstrim_m10_gpios)); + if (ret) + pr_err("Failed to request gpios (%d)\n", ret); + + imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); + + imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata, + sizeof(snd_mx27vis_pdata)); + platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, + &iclink_tvp5150, sizeof(iclink_tvp5150)); + + gpio_led_register_device(0, &visstrim_m10_led_data); + + /* Use mother board version to decide what video devices we shall use */ + mo_version = (system_rev >> MOTHERBOARD_SHIFT) & VERSION_MASK; + if (mo_version & 0x1) { + visstrim_emmaprp_init(); + + /* + * Despite not being used, tvp5150 must be + * powered on to avoid I2C problems. To minimize + * power consupmtion keep reset enabled. + */ + gpio_set_value(TVP5150_PWDN, 1); + ndelay(1); + gpio_set_value(TVP5150_RSTN, 0); + } else { + visstrim_deinterlace_init(); + visstrim_analog_camera_init(); + } + + visstrim_coda_init(); +} + +static void __init visstrim_m10_timer_init(void) +{ + mx27_clocks_init((unsigned long)25000000); +} + +MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") + .atag_offset = 0x100, + .reserve = visstrim_reserve, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .init_time = visstrim_m10_timer_init, + .init_machine = visstrim_m10_board_init, + .init_late = visstrim_m10_late_init, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c new file mode 100644 index 000000000..4cab5f612 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx50.c @@ -0,0 +1,26 @@ +/* + * Copyright 2013 Greg Ungerer <gerg@uclinux.org> + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/of_platform.h> +#include <asm/mach/arch.h> + +#include "common.h" + +static const char * const imx50_dt_board_compat[] __initconst = { + "fsl,imx50", + NULL +}; + +DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)") + .dt_compat = imx50_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c new file mode 100644 index 000000000..08c789286 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx51.c @@ -0,0 +1,104 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "common.h" +#include "hardware.h" + +static void __init imx51_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX51); +} + +/* + * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by + * the Freescale marketing division. However this did not remove the + * hardware from the chip which still needs to be configured for proper + * IPU support. + */ +#define MX51_MIPI_HSC_BASE 0x83fdc000 +static void __init imx51_ipu_mipi_setup(void) +{ + void __iomem *hsc_addr; + + hsc_addr = ioremap(MX51_MIPI_HSC_BASE, SZ_16K); + WARN_ON(!hsc_addr); + + /* setup MIPI module to legacy mode */ + imx_writel(0xf00, hsc_addr); + + /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */ + imx_writel(imx_readl(hsc_addr + 0x800) | 0x30ff, hsc_addr + 0x800); + + iounmap(hsc_addr); +} + +static void __init imx51_m4if_setup(void) +{ + void __iomem *m4if_base; + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx51-m4if"); + if (!np) + return; + + m4if_base = of_iomap(np, 0); + of_node_put(np); + if (!m4if_base) { + pr_err("Unable to map M4IF registers\n"); + return; + } + + /* + * Configure VPU and IPU with higher priorities + * in order to avoid artifacts during video playback + */ + writel_relaxed(0x00000203, m4if_base + 0x40); + writel_relaxed(0x00000000, m4if_base + 0x44); + writel_relaxed(0x00120125, m4if_base + 0x9c); + writel_relaxed(0x001901A3, m4if_base + 0x48); + iounmap(m4if_base); +} + +static void __init imx51_dt_init(void) +{ + imx51_ipu_mipi_setup(); + imx_src_init(); + imx51_m4if_setup(); + imx5_pmu_init(); + imx_aips_allow_unprivileged_access("fsl,imx51-aipstz"); +} + +static void __init imx51_init_late(void) +{ + mx51_neon_fixup(); + imx51_pm_init(); +} + +static const char * const imx51_dt_board_compat[] __initconst = { + "fsl,imx51", + NULL +}; + +DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)") + .init_early = imx51_init_early, + .init_machine = imx51_dt_init, + .init_late = imx51_init_late, + .dt_compat = imx51_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c new file mode 100644 index 000000000..5ec710073 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx53.c @@ -0,0 +1,53 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "common.h" +#include "hardware.h" + +static void __init imx53_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX53); +} + +static void __init imx53_dt_init(void) +{ + imx_src_init(); + imx5_pmu_init(); + imx_aips_allow_unprivileged_access("fsl,imx53-aipstz"); +} + +static void __init imx53_init_late(void) +{ + imx53_pm_init(); +} + +static const char * const imx53_dt_board_compat[] __initconst = { + "fsl,imx53", + NULL +}; + +DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") + .init_early = imx53_init_early, + .init_machine = imx53_dt_init, + .init_late = imx53_init_late, + .dt_compat = imx53_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c new file mode 100644 index 000000000..7d80a0ae7 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -0,0 +1,337 @@ +/* + * Copyright 2011-2013 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/cpu.h> +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/pm_opp.h> +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/reboot.h> +#include <linux/regmap.h> +#include <linux/micrel_phy.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/system_misc.h> + +#include "common.h" +#include "cpuidle.h" +#include "hardware.h" + +/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ +static int ksz9021rn_phy_fixup(struct phy_device *phydev) +{ + if (IS_BUILTIN(CONFIG_PHYLIB)) { + /* min rx data delay */ + phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL, + 0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW); + phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000); + + /* max rx/tx clock delay, min rx/tx control delay */ + phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL, + 0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW); + phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0); + phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL, + MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW); + } + + return 0; +} + +static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val) +{ + phy_write(dev, 0x0d, device); + phy_write(dev, 0x0e, reg); + phy_write(dev, 0x0d, (1 << 14) | device); + phy_write(dev, 0x0e, val); +} + +static int ksz9031rn_phy_fixup(struct phy_device *dev) +{ + /* + * min rx data delay, max rx/tx clock delay, + * min rx/tx control delay + */ + mmd_write_reg(dev, 2, 4, 0); + mmd_write_reg(dev, 2, 5, 0); + mmd_write_reg(dev, 2, 8, 0x003ff); + + return 0; +} + +/* + * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High + * as they are used for slots1-7 PERST# + */ +static void ventana_pciesw_early_fixup(struct pci_dev *dev) +{ + u32 dw; + + if (!of_machine_is_compatible("gw,ventana")) + return; + + if (dev->devfn != 0) + return; + + pci_read_config_dword(dev, 0x62c, &dw); + dw |= 0xaaa8; // GPIO1-7 outputs + pci_write_config_dword(dev, 0x62c, dw); + + pci_read_config_dword(dev, 0x644, &dw); + dw |= 0xfe; // GPIO1-7 output high + pci_write_config_dword(dev, 0x644, dw); + + msleep(100); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup); + +static int ar8031_phy_fixup(struct phy_device *dev) +{ + u16 val; + + /* To enable AR8031 output a 125MHz clk from CLK_25M */ + phy_write(dev, 0xd, 0x7); + phy_write(dev, 0xe, 0x8016); + phy_write(dev, 0xd, 0x4007); + + val = phy_read(dev, 0xe); + val &= 0xffe3; + val |= 0x18; + phy_write(dev, 0xe, val); + + /* introduce tx clock delay */ + phy_write(dev, 0x1d, 0x5); + val = phy_read(dev, 0x1e); + val |= 0x0100; + phy_write(dev, 0x1e, val); + + return 0; +} + +#define PHY_ID_AR8031 0x004dd074 + +static int ar8035_phy_fixup(struct phy_device *dev) +{ + u16 val; + + /* Ar803x phy SmartEEE feature cause link status generates glitch, + * which cause ethernet link down/up issue, so disable SmartEEE + */ + phy_write(dev, 0xd, 0x3); + phy_write(dev, 0xe, 0x805d); + phy_write(dev, 0xd, 0x4003); + + val = phy_read(dev, 0xe); + phy_write(dev, 0xe, val & ~(1 << 8)); + + /* + * Enable 125MHz clock from CLK_25M on the AR8031. This + * is fed in to the IMX6 on the ENET_REF_CLK (V22) pad. + * Also, introduce a tx clock delay. + * + * This is the same as is the AR8031 fixup. + */ + ar8031_phy_fixup(dev); + + /*check phy power*/ + val = phy_read(dev, 0x0); + if (val & BMCR_PDOWN) + phy_write(dev, 0x0, val & ~BMCR_PDOWN); + + return 0; +} + +#define PHY_ID_AR8035 0x004dd072 + +static void __init imx6q_enet_phy_init(void) +{ + if (IS_BUILTIN(CONFIG_PHYLIB)) { + phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, + ksz9021rn_phy_fixup); + phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK, + ksz9031rn_phy_fixup); + phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef, + ar8031_phy_fixup); + phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef, + ar8035_phy_fixup); + } +} + +static void __init imx6q_1588_init(void) +{ + struct device_node *np; + struct clk *ptp_clk; + struct clk *enet_ref; + struct regmap *gpr; + u32 clksel; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-fec"); + if (!np) { + pr_warn("%s: failed to find fec node\n", __func__); + return; + } + + ptp_clk = of_clk_get(np, 2); + if (IS_ERR(ptp_clk)) { + pr_warn("%s: failed to get ptp clock\n", __func__); + goto put_node; + } + + enet_ref = clk_get_sys(NULL, "enet_ref"); + if (IS_ERR(enet_ref)) { + pr_warn("%s: failed to get enet clock\n", __func__); + goto put_ptp_clk; + } + + /* + * If enet_ref from ANATOP/CCM is the PTP clock source, we need to + * set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad + * (external OSC), and we need to clear the bit. + */ + clksel = clk_is_match(ptp_clk, enet_ref) ? + IMX6Q_GPR1_ENET_CLK_SEL_ANATOP : + IMX6Q_GPR1_ENET_CLK_SEL_PAD; + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6Q_GPR1_ENET_CLK_SEL_MASK, + clksel); + else + pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n"); + + clk_put(enet_ref); +put_ptp_clk: + clk_put(ptp_clk); +put_node: + of_node_put(np); +} + +static void __init imx6q_axi_init(void) +{ + struct regmap *gpr; + unsigned int mask; + + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) { + /* + * Enable the cacheable attribute of VPU and IPU + * AXI transactions. + */ + mask = IMX6Q_GPR4_VPU_WR_CACHE_SEL | + IMX6Q_GPR4_VPU_RD_CACHE_SEL | + IMX6Q_GPR4_VPU_P_WR_CACHE_VAL | + IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK | + IMX6Q_GPR4_IPU_WR_CACHE_CTL | + IMX6Q_GPR4_IPU_RD_CACHE_CTL; + regmap_update_bits(gpr, IOMUXC_GPR4, mask, mask); + + /* Increase IPU read QoS priority */ + regmap_update_bits(gpr, IOMUXC_GPR6, + IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK | + IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK, + (0xf << 16) | (0x7 << 20)); + regmap_update_bits(gpr, IOMUXC_GPR7, + IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK | + IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK, + (0xf << 16) | (0x7 << 20)); + } else { + pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n"); + } +} + +static void __init imx6q_init_machine(void) +{ + struct device *parent; + + if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0) + imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0); + else + imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", + imx_get_soc_revision()); + + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + + imx6q_enet_phy_init(); + + of_platform_default_populate(NULL, NULL, parent); + + imx_anatop_init(); + cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init(); + imx6q_1588_init(); + imx6q_axi_init(); +} + +static void __init imx6q_init_late(void) +{ + /* + * WAIT mode is broken on imx6 Dual/Quad revision 1.0 and 1.1 so + * there is no point to run cpuidle on them. + * + * It does work on imx6 Solo/DualLite starting from 1.1 + */ + if ((cpu_is_imx6q() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) || + (cpu_is_imx6dl() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_0)) + imx6q_cpuidle_init(); + + if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) + platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); +} + +static void __init imx6q_map_io(void) +{ + debug_ll_io_init(); + imx_scu_map_io(); +} + +static void __init imx6q_init_irq(void) +{ + imx_gpc_check_dt(); + imx_init_revision_from_anatop(); + imx_init_l2cache(); + imx_src_init(); + irqchip_init(); + imx6_pm_ccm_init("fsl,imx6q-ccm"); +} + +static const char * const imx6q_dt_compat[] __initconst = { + "fsl,imx6dl", + "fsl,imx6q", + "fsl,imx6qp", + NULL, +}; + +DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .smp = smp_ops(imx_smp_ops), + .map_io = imx6q_map_io, + .init_irq = imx6q_init_irq, + .init_machine = imx6q_init_machine, + .init_late = imx6q_init_late, + .dt_compat = imx6q_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c new file mode 100644 index 000000000..99be42252 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -0,0 +1,93 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/irqchip.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include <linux/regmap.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "cpuidle.h" +#include "hardware.h" + +static void __init imx6sl_fec_init(void) +{ + struct regmap *gpr; + + /* set FEC clock from internal PLL clock source */ + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sl-iomuxc-gpr"); + if (!IS_ERR(gpr)) { + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK, 0); + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK, 0); + } else { + pr_err("failed to find fsl,imx6sl-iomux-gpr regmap\n"); + } +} + +static void __init imx6sl_init_late(void) +{ + /* imx6sl reuses imx6q cpufreq driver */ + if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) + platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); + + if (IS_ENABLED(CONFIG_SOC_IMX6SL) && cpu_is_imx6sl()) + imx6sl_cpuidle_init(); + else if (IS_ENABLED(CONFIG_SOC_IMX6SLL)) + imx6sx_cpuidle_init(); +} + +static void __init imx6sl_init_machine(void) +{ + struct device *parent; + + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + + of_platform_default_populate(NULL, NULL, parent); + + if (cpu_is_imx6sl()) + imx6sl_fec_init(); + imx_anatop_init(); + imx6sl_pm_init(); +} + +static void __init imx6sl_init_irq(void) +{ + imx_gpc_check_dt(); + imx_init_revision_from_anatop(); + imx_init_l2cache(); + imx_src_init(); + irqchip_init(); + if (cpu_is_imx6sl()) + imx6_pm_ccm_init("fsl,imx6sl-ccm"); + else + imx6_pm_ccm_init("fsl,imx6sll-ccm"); +} + +static const char * const imx6sl_dt_compat[] __initconst = { + "fsl,imx6sl", + "fsl,imx6sll", + NULL, +}; + +DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .init_irq = imx6sl_init_irq, + .init_machine = imx6sl_init_machine, + .init_late = imx6sl_init_late, + .dt_compat = imx6sl_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c new file mode 100644 index 000000000..7f52d9b1e --- /dev/null +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -0,0 +1,112 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/irqchip.h> +#include <linux/of_platform.h> +#include <linux/phy.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "cpuidle.h" + +static int ar8031_phy_fixup(struct phy_device *dev) +{ + u16 val; + + /* Set RGMII IO voltage to 1.8V */ + phy_write(dev, 0x1d, 0x1f); + phy_write(dev, 0x1e, 0x8); + + /* introduce tx clock delay */ + phy_write(dev, 0x1d, 0x5); + val = phy_read(dev, 0x1e); + val |= 0x0100; + phy_write(dev, 0x1e, val); + + return 0; +} + +#define PHY_ID_AR8031 0x004dd074 +static void __init imx6sx_enet_phy_init(void) +{ + if (IS_BUILTIN(CONFIG_PHYLIB)) + phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff, + ar8031_phy_fixup); +} + +static void __init imx6sx_enet_clk_sel(void) +{ + struct regmap *gpr; + + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sx-iomuxc-gpr"); + if (!IS_ERR(gpr)) { + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK, 0); + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK, 0); + } else { + pr_err("failed to find fsl,imx6sx-iomux-gpr regmap\n"); + } +} + +static inline void imx6sx_enet_init(void) +{ + imx6sx_enet_phy_init(); + imx6sx_enet_clk_sel(); +} + +static void __init imx6sx_init_machine(void) +{ + struct device *parent; + + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + + of_platform_default_populate(NULL, NULL, parent); + + imx6sx_enet_init(); + imx_anatop_init(); + imx6sx_pm_init(); +} + +static void __init imx6sx_init_irq(void) +{ + imx_gpc_check_dt(); + imx_init_revision_from_anatop(); + imx_init_l2cache(); + imx_src_init(); + irqchip_init(); + imx6_pm_ccm_init("fsl,imx6sx-ccm"); +} + +static void __init imx6sx_init_late(void) +{ + imx6sx_cpuidle_init(); + + if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) + platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); +} + +static const char * const imx6sx_dt_compat[] __initconst = { + "fsl,imx6sx", + NULL, +}; + +DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .init_irq = imx6sx_init_irq, + .init_machine = imx6sx_init_machine, + .dt_compat = imx6sx_dt_compat, + .init_late = imx6sx_init_late, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c new file mode 100644 index 000000000..6cb8a22b6 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/irqchip.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include <linux/micrel_phy.h> +#include <linux/of_platform.h> +#include <linux/phy.h> +#include <linux/regmap.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "cpuidle.h" + +static void __init imx6ul_enet_clk_init(void) +{ + struct regmap *gpr; + + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr"); + if (!IS_ERR(gpr)) + regmap_update_bits(gpr, IOMUXC_GPR1, IMX6UL_GPR1_ENET_CLK_DIR, + IMX6UL_GPR1_ENET_CLK_OUTPUT); + else + pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n"); + +} + +static int ksz8081_phy_fixup(struct phy_device *dev) +{ + if (dev && dev->interface == PHY_INTERFACE_MODE_MII) { + phy_write(dev, 0x1f, 0x8110); + phy_write(dev, 0x16, 0x201); + } else if (dev && dev->interface == PHY_INTERFACE_MODE_RMII) { + phy_write(dev, 0x1f, 0x8190); + phy_write(dev, 0x16, 0x202); + } + + return 0; +} + +static void __init imx6ul_enet_phy_init(void) +{ + if (IS_BUILTIN(CONFIG_PHYLIB)) + phy_register_fixup_for_uid(PHY_ID_KSZ8081, MICREL_PHY_ID_MASK, + ksz8081_phy_fixup); +} + +static inline void imx6ul_enet_init(void) +{ + imx6ul_enet_clk_init(); + imx6ul_enet_phy_init(); +} + +static void __init imx6ul_init_machine(void) +{ + struct device *parent; + + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + + of_platform_default_populate(NULL, NULL, parent); + imx6ul_enet_init(); + imx_anatop_init(); + imx6ul_pm_init(); +} + +static void __init imx6ul_init_irq(void) +{ + imx_init_revision_from_anatop(); + imx_src_init(); + irqchip_init(); + imx6_pm_ccm_init("fsl,imx6ul-ccm"); +} + +static void __init imx6ul_init_late(void) +{ + imx6sx_cpuidle_init(); + + if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) + platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); +} + +static const char * const imx6ul_dt_compat[] __initconst = { + "fsl,imx6ul", + "fsl,imx6ull", + NULL, +}; + +DT_MACHINE_START(IMX6UL, "Freescale i.MX6 Ultralite (Device Tree)") + .init_irq = imx6ul_init_irq, + .init_machine = imx6ul_init_machine, + .init_late = imx6ul_init_late, + .dt_compat = imx6ul_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx7d-cm4.c b/arch/arm/mach-imx/mach-imx7d-cm4.c new file mode 100644 index 000000000..0800b5891 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx7d-cm4.c @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 Pengutronix, Oleksij Rempel <o.rempel@pengutronix.de> + */ + +#include <linux/kernel.h> +#include <asm/v7m.h> +#include <asm/mach/arch.h> + +static const char * const imx7d_cm4_dt_compat[] __initconst = { + "fsl,imx7d-cm4", + NULL, +}; + +DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual Cortex-M4 (Device Tree)") + .dt_compat = imx7d_cm4_dt_compat, + .restart = armv7m_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c new file mode 100644 index 000000000..26ca744d3 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -0,0 +1,117 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/irqchip.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx7-iomuxc-gpr.h> +#include <linux/of_platform.h> +#include <linux/phy.h> +#include <linux/regmap.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" + +static int ar8031_phy_fixup(struct phy_device *dev) +{ + u16 val; + + /* Set RGMII IO voltage to 1.8V */ + phy_write(dev, 0x1d, 0x1f); + phy_write(dev, 0x1e, 0x8); + + /* disable phy AR8031 SmartEEE function. */ + phy_write(dev, 0xd, 0x3); + phy_write(dev, 0xe, 0x805d); + phy_write(dev, 0xd, 0x4003); + val = phy_read(dev, 0xe); + val &= ~(0x1 << 8); + phy_write(dev, 0xe, val); + + /* introduce tx clock delay */ + phy_write(dev, 0x1d, 0x5); + val = phy_read(dev, 0x1e); + val |= 0x0100; + phy_write(dev, 0x1e, val); + + return 0; +} + +static int bcm54220_phy_fixup(struct phy_device *dev) +{ + /* enable RXC skew select RGMII copper mode */ + phy_write(dev, 0x1e, 0x21); + phy_write(dev, 0x1f, 0x7ea8); + phy_write(dev, 0x1e, 0x2f); + phy_write(dev, 0x1f, 0x71b7); + + return 0; +} + +#define PHY_ID_AR8031 0x004dd074 +#define PHY_ID_BCM54220 0x600d8589 + +static void __init imx7d_enet_phy_init(void) +{ + if (IS_BUILTIN(CONFIG_PHYLIB)) { + phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff, + ar8031_phy_fixup); + phy_register_fixup_for_uid(PHY_ID_BCM54220, 0xffffffff, + bcm54220_phy_fixup); + } +} + +static void __init imx7d_enet_clk_sel(void) +{ + struct regmap *gpr; + + gpr = syscon_regmap_lookup_by_compatible("fsl,imx7d-iomuxc-gpr"); + if (!IS_ERR(gpr)) { + regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_TX_CLK_SEL_MASK, 0); + regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_CLK_DIR_MASK, 0); + } else { + pr_err("failed to find fsl,imx7d-iomux-gpr regmap\n"); + } +} + +static inline void imx7d_enet_init(void) +{ + imx7d_enet_phy_init(); + imx7d_enet_clk_sel(); +} + +static void __init imx7d_init_machine(void) +{ + struct device *parent; + + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + + imx_anatop_init(); + imx7d_enet_init(); +} + +static void __init imx7d_init_irq(void) +{ + imx_init_revision_from_anatop(); + imx_src_init(); + irqchip_init(); +} + +static const char *const imx7d_dt_compat[] __initconst = { + "fsl,imx7d", + "fsl,imx7s", + NULL, +}; + +DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)") + .init_irq = imx7d_init_irq, + .init_machine = imx7d_init_machine, + .dt_compat = imx7d_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c new file mode 100644 index 000000000..ab847e2c8 --- /dev/null +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -0,0 +1,300 @@ +/* + * KZM-ARM11-01 support + * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org> + * + * based on code for MX31ADS, + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/smsc911x.h> +#include <linux/types.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/memory.h> +#include <asm/setup.h> +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +#include "common.h" +#include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" + +#define KZM_ARM11_IO_ADDRESS(x) (IOMEM( \ + IMX_IO_P2V_MODULE(x, MX31_CS4) ?: \ + IMX_IO_P2V_MODULE(x, MX31_CS5)) ?: \ + MX31_IO_ADDRESS(x)) + +/* + * KZM-ARM11-01 Board Control Registers on FPGA + */ +#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000) +#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001) +#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002) +#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004) +#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008) +#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010) +#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020) +#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003) + +/* + * External UART for touch panel on FPGA + */ +#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050) + +#if IS_ENABLED(CONFIG_SERIAL_8250) +/* + * KZM-ARM11-01 has an external UART on FPGA + */ +static struct plat_serial8250_port serial_platform_data[] = { + { + .membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550), + .mapbase = KZM_ARM11_16550, + /* irq number is run-time assigned */ + .irqflags = IRQ_TYPE_EDGE_RISING, + .uartclk = 14745600, + .regshift = 0, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_BUGGY_UART, + }, + {}, +}; + +static struct resource serial8250_resources[] = { + { + .start = KZM_ARM11_16550, + .end = KZM_ARM11_16550 + 0x10, + .flags = IORESOURCE_MEM, + }, + { + /* irq number is run-time assigned */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data, + }, + .num_resources = ARRAY_SIZE(serial8250_resources), + .resource = serial8250_resources, +}; + +static int __init kzm_init_ext_uart(void) +{ + u8 tmp; + + /* + * GPIO 1-1: external UART interrupt line + */ + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)); + gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int"); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + + /* + * Unmask UART interrupt + */ + tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); + tmp |= 0x2; + __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); + + serial_platform_data[0].irq = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + serial8250_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + serial8250_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + + return platform_device_register(&serial_device); +} +#else +static inline int kzm_init_ext_uart(void) +{ + return 0; +} +#endif + +/* + * SMSC LAN9118 + */ +#if IS_ENABLED(CONFIG_SMSC911X) +static struct smsc911x_platform_config kzm_smsc9118_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, +}; + +static struct resource kzm_smsc9118_resources[] = { + { + .start = MX31_CS5_BASE_ADDR, + .end = MX31_CS5_BASE_ADDR + SZ_128K - 1, + .flags = IORESOURCE_MEM, + }, + { + /* irq number is run-time assigned */ + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct platform_device kzm_smsc9118_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(kzm_smsc9118_resources), + .resource = kzm_smsc9118_resources, + .dev = { + .platform_data = &kzm_smsc9118_config, + }, +}; + +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + +static int __init kzm_init_smsc9118(void) +{ + /* + * GPIO 1-2: SMSC9118 interrupt line + */ + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO)); + gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int"); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); + + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + + kzm_smsc9118_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); + kzm_smsc9118_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); + + return platform_device_register(&kzm_smsc9118_device); +} +#else +static inline int kzm_init_smsc9118(void) +{ + return 0; +} +#endif + +#if IS_ENABLED(CONFIG_SERIAL_IMX) +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static void __init kzm_init_imx_uart(void) +{ + imx31_add_imx_uart0(&uart_pdata); + imx31_add_imx_uart1(&uart_pdata); +} +#else +static inline void kzm_init_imx_uart(void) +{ +} +#endif + +static int kzm_pins[] __initdata = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + MX31_PIN_DCD_DCE1__DCD_DCE1, + MX31_PIN_RI_DCE1__RI_DCE1, + MX31_PIN_DSR_DCE1__DSR_DCE1, + MX31_PIN_DTR_DCE1__DTR_DCE1, + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + MX31_PIN_DCD_DTE1__DCD_DTE2, + MX31_PIN_RI_DTE1__RI_DTE2, + MX31_PIN_DSR_DTE1__DSR_DTE2, + MX31_PIN_DTR_DTE1__DTR_DTE2, +}; + +/* + * Board specific initialization. + */ +static void __init kzm_board_init(void) +{ + imx31_soc_init(); + + mxc_iomux_setup_multiple_pins(kzm_pins, + ARRAY_SIZE(kzm_pins), "kzm"); + kzm_init_imx_uart(); + + pr_info("Clock input source is 26MHz\n"); +} + +static void __init kzm_late_init(void) +{ + kzm_init_ext_uart(); + kzm_init_smsc9118(); +} + +/* + * This structure defines static mappings for the kzm-arm11-01 board. + */ +static struct map_desc kzm_io_desc[] __initdata = { + { + .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), + .length = MX31_CS4_SIZE, + .type = MT_DEVICE + }, + { + .virtual = (unsigned long)MX31_CS5_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), + .length = MX31_CS5_SIZE, + .type = MT_DEVICE + }, +}; + +/* + * Set up static virtual mappings. + */ +static void __init kzm_map_io(void) +{ + mx31_map_io(); + iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc)); +} + +static void __init kzm_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") + .atag_offset = 0x100, + .map_io = kzm_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .init_time = kzm_timer_init, + .init_machine = kzm_board_init, + .init_late = kzm_late_init, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-ls1021a.c b/arch/arm/mach-imx/mach-ls1021a.c new file mode 100644 index 000000000..b89c858eb --- /dev/null +++ b/arch/arm/mach-imx/mach-ls1021a.c @@ -0,0 +1,22 @@ +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <asm/mach/arch.h> + +#include "common.h" + +static const char * const ls1021a_dt_compat[] __initconst = { + "fsl,ls1021a", + NULL, +}; + +DT_MACHINE_START(LS1021A, "Freescale LS1021A") + .smp = smp_ops(ls1021a_smp_ops), + .dt_compat = ls1021a_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c new file mode 100644 index 000000000..5e3668248 --- /dev/null +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -0,0 +1,338 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/physmap.h> +#include <linux/gpio/driver.h> +#include <linux/gpio.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include "common.h" +#include "devices-imx21.h" +#include "hardware.h" +#include "iomux-mx21.h" + +#define MX21ADS_CS8900A_REG (MX21_CS1_BASE_ADDR + 0x000000) +#define MX21ADS_ST16C255_IOBASE_REG (MX21_CS1_BASE_ADDR + 0x200000) +#define MX21ADS_VERSION_REG (MX21_CS1_BASE_ADDR + 0x400000) +#define MX21ADS_IO_REG (MX21_CS1_BASE_ADDR + 0x800000) + +#define MX21ADS_MMC_CD IMX_GPIO_NR(4, 25) +#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) +#define MX21ADS_MMGPIO_BASE (6 * 32) + +/* MX21ADS_IO_REG bit definitions */ +#define MX21ADS_IO_SD_WP (MX21ADS_MMGPIO_BASE + 0) +#define MX21ADS_IO_TP6 (MX21ADS_IO_SD_WP) +#define MX21ADS_IO_SW_SEL (MX21ADS_MMGPIO_BASE + 1) +#define MX21ADS_IO_TP7 (MX21ADS_IO_SW_SEL) +#define MX21ADS_IO_RESET_E_UART (MX21ADS_MMGPIO_BASE + 2) +#define MX21ADS_IO_RESET_BASE (MX21ADS_MMGPIO_BASE + 3) +#define MX21ADS_IO_CSI_CTL2 (MX21ADS_MMGPIO_BASE + 4) +#define MX21ADS_IO_CSI_CTL1 (MX21ADS_MMGPIO_BASE + 5) +#define MX21ADS_IO_CSI_CTL0 (MX21ADS_MMGPIO_BASE + 6) +#define MX21ADS_IO_UART1_EN (MX21ADS_MMGPIO_BASE + 7) +#define MX21ADS_IO_UART4_EN (MX21ADS_MMGPIO_BASE + 8) +#define MX21ADS_IO_LCDON (MX21ADS_MMGPIO_BASE + 9) +#define MX21ADS_IO_IRDA_EN (MX21ADS_MMGPIO_BASE + 10) +#define MX21ADS_IO_IRDA_FIR_SEL (MX21ADS_MMGPIO_BASE + 11) +#define MX21ADS_IO_IRDA_MD0_B (MX21ADS_MMGPIO_BASE + 12) +#define MX21ADS_IO_IRDA_MD1 (MX21ADS_MMGPIO_BASE + 13) +#define MX21ADS_IO_LED4_ON (MX21ADS_MMGPIO_BASE + 14) +#define MX21ADS_IO_LED3_ON (MX21ADS_MMGPIO_BASE + 15) + +static const int mx21ads_pins[] __initconst = { + + /* CS8900A */ + (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11), + + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + + /* UART3 (IrDA) - only TXD and RXD */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + + /* UART4 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + + /* LCDC */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA24_PF_REV, /* Sharp panel dedicated signal */ + PA25_PF_CLS, /* Sharp panel dedicated signal */ + PA26_PF_PS, /* Sharp panel dedicated signal */ + PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */ + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + + /* MMC/SDHC */ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + + /* NFC */ + PF0_PF_NRFB, + PF1_PF_NFCE, + PF2_PF_NFWP, + PF3_PF_NFCLE, + PF4_PF_NFALE, + PF5_PF_NFRE, + PF6_PF_NFWE, + PF7_PF_NFIO0, + PF8_PF_NFIO1, + PF9_PF_NFIO2, + PF10_PF_NFIO3, + PF11_PF_NFIO4, + PF12_PF_NFIO5, + PF13_PF_NFIO6, + PF14_PF_NFIO7, +}; + +/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */ +static struct physmap_flash_data mx21ads_flash_data = { + .width = 4, +}; + +static struct resource mx21ads_flash_resource = + DEFINE_RES_MEM(MX21_CS0_BASE_ADDR, SZ_32M); + +static struct platform_device mx21ads_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &mx21ads_flash_data, + }, + .num_resources = 1, + .resource = &mx21ads_flash_resource, +}; + +static struct resource mx21ads_cs8900_resources[] __initdata = { + DEFINE_RES_MEM(MX21ADS_CS8900A_REG, SZ_1K), + /* irq number is run-time assigned */ + DEFINE_RES_IRQ(-1), +}; + +static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = { + .name = "cs89x0", + .id = 0, + .res = mx21ads_cs8900_resources, + .num_res = ARRAY_SIZE(mx21ads_cs8900_resources), +}; + +static const struct imxuart_platform_data uart_pdata_rts __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static const struct imxuart_platform_data uart_pdata_norts __initconst = { +}; + +static struct resource mx21ads_mmgpio_resource = + DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat"); + +static struct bgpio_pdata mx21ads_mmgpio_pdata = { + .base = MX21ADS_MMGPIO_BASE, + .ngpio = 16, +}; + +static struct platform_device mx21ads_mmgpio = { + .name = "basic-mmio-gpio", + .id = PLATFORM_DEVID_AUTO, + .resource = &mx21ads_mmgpio_resource, + .num_resources = 1, + .dev = { + .platform_data = &mx21ads_mmgpio_pdata, + }, +}; + +static struct regulator_consumer_supply mx21ads_lcd_regulator_consumer = + REGULATOR_SUPPLY("lcd", "imx-fb.0"); + +static struct regulator_init_data mx21ads_lcd_regulator_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = &mx21ads_lcd_regulator_consumer, + .num_consumer_supplies = 1, +}; + +static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = { + .supply_name = "LCD", + .microvolts = 3300000, + .gpio = MX21ADS_IO_LCDON, + .enable_high = 1, + .init_data = &mx21ads_lcd_regulator_init_data, +}; + +static struct platform_device mx21ads_lcd_regulator = { + .name = "reg-fixed-voltage", + .id = PLATFORM_DEVID_AUTO, + .dev = { + .platform_data = &mx21ads_lcd_regulator_pdata, + }, +}; + +/* + * Connected is a portrait Sharp-QVGA display + * of type: LQ035Q7DB02 + */ +static struct imx_fb_videomode mx21ads_modes[] = { + { + .mode = { + .name = "Sharp-LQ035Q7", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 188679, /* in ps (5.3MHz) */ + .hsync_len = 2, + .left_margin = 6, + .right_margin = 16, + .vsync_len = 1, + .upper_margin = 8, + .lower_margin = 10, + }, + .pcr = 0xfb108bc7, + .bpp = 16, + }, +}; + +static const struct imx_fb_platform_data mx21ads_fb_data __initconst = { + .mode = mx21ads_modes, + .num_modes = ARRAY_SIZE(mx21ads_modes), + + .pwmr = 0x00a903ff, + .lscr1 = 0x00120300, + .dmacr = 0x00020008, +}; + +static int mx21ads_sdhc_get_ro(struct device *dev) +{ + return gpio_get_value(MX21ADS_IO_SD_WP); +} + +static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro"); + if (ret) + return ret; + + return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq, + IRQF_TRIGGER_FALLING, "mmc-detect", data); +} + +static void mx21ads_sdhc_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(MX21ADS_MMC_CD), data); + gpio_free(MX21ADS_IO_SD_WP); +} + +static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = { + .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */ + .get_ro = mx21ads_sdhc_get_ro, + .init = mx21ads_sdhc_init, + .exit = mx21ads_sdhc_exit, +}; + +static const struct mxc_nand_platform_data +mx21ads_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, +}; + +static struct platform_device *platform_devices[] __initdata = { + &mx21ads_mmgpio, + &mx21ads_lcd_regulator, + &mx21ads_nor_mtd_device, +}; + +static void __init mx21ads_board_init(void) +{ + imx21_soc_init(); + + mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins), + "mx21ads"); + + imx21_add_imx_uart0(&uart_pdata_rts); + imx21_add_imx_uart2(&uart_pdata_norts); + imx21_add_imx_uart3(&uart_pdata_rts); + imx21_add_mxc_nand(&mx21ads_nand_board_info); + + imx21_add_imx_fb(&mx21ads_fb_data); +} + +static void __init mx21ads_late_init(void) +{ + imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + mx21ads_cs8900_resources[1].start = + gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); + mx21ads_cs8900_resources[1].end = + gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); + platform_device_register_full(&mx21ads_cs8900_devinfo); +} + +static void __init mx21ads_timer_init(void) +{ + mx21_clocks_init(32768, 26000000); +} + +MACHINE_START(MX21ADS, "Freescale i.MX21ADS") + /* maintainer: Freescale Semiconductor, Inc. */ + .atag_offset = 0x100, + .map_io = mx21_map_io, + .init_early = imx21_init_early, + .init_irq = mx21_init_irq, + .init_time = mx21ads_timer_init, + .init_machine = mx21ads_board_init, + .init_late = mx21ads_late_init, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c new file mode 100644 index 000000000..45e16bd7e --- /dev/null +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -0,0 +1,454 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * This machine is known as: + * - i.MX27 3-Stack Development System + * - i.MX27 Platform Development Kit (i.MX27 PDK) + */ + +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/delay.h> +#include <linux/mfd/mc13783.h> +#include <linux/spi/spi.h> +#include <linux/regulator/machine.h> +#include <linux/spi/l4f00242t03.h> + + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "3ds_debugboard.h" +#include "common.h" +#include "devices-imx27.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx27.h" +#include "ulpi.h" + +#define SD1_EN_GPIO IMX_GPIO_NR(2, 25) +#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23) +#define SPI2_SS0 IMX_GPIO_NR(4, 21) +#define PMIC_INT IMX_GPIO_NR(3, 14) +#define SPI1_SS0 IMX_GPIO_NR(4, 28) +#define SD1_CD IMX_GPIO_NR(2, 26) +#define LCD_RESET IMX_GPIO_NR(1, 3) +#define LCD_ENABLE IMX_GPIO_NR(1, 31) + +static const int mx27pdk_pins[] __initconst = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* SDHC1 */ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT, + /* OTG */ + OTG_PHY_RESET_GPIO | GPIO_GPIO | GPIO_OUT, + PC7_PF_USBOTG_DATA5, + PC8_PF_USBOTG_DATA6, + PC9_PF_USBOTG_DATA0, + PC10_PF_USBOTG_DATA2, + PC11_PF_USBOTG_DATA1, + PC12_PF_USBOTG_DATA4, + PC13_PF_USBOTG_DATA3, + PE0_PF_USBOTG_NXT, + PE1_PF_USBOTG_STP, + PE2_PF_USBOTG_DIR, + PE24_PF_USBOTG_CLK, + PE25_PF_USBOTG_DATA7, + /* CSPI1 */ + PD31_PF_CSPI1_MOSI, + PD30_PF_CSPI1_MISO, + PD29_PF_CSPI1_SCLK, + PD25_PF_CSPI1_RDY, + SPI1_SS0 | GPIO_GPIO | GPIO_OUT, + /* CSPI2 */ + PD22_PF_CSPI2_SCLK, + PD23_PF_CSPI2_MISO, + PD24_PF_CSPI2_MOSI, + SPI2_SS0 | GPIO_GPIO | GPIO_OUT, + /* I2C1 */ + PD17_PF_I2C_DATA, + PD18_PF_I2C_CLK, + /* PMIC INT */ + PMIC_INT | GPIO_GPIO | GPIO_IN, + /* LCD */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + LCD_ENABLE | GPIO_GPIO | GPIO_OUT, + LCD_RESET | GPIO_GPIO | GPIO_OUT, + /* SSI4 */ + PC16_PF_SSI4_FS, + PC17_PF_SSI4_RXD, + PC18_PF_SSI4_TXD, + PC19_PF_SSI4_CLK, +}; + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* + * Matrix keyboard + */ + +static const uint32_t mx27_3ds_keymap[] = { + KEY(0, 0, KEY_UP), + KEY(0, 1, KEY_DOWN), + KEY(1, 0, KEY_RIGHT), + KEY(1, 1, KEY_LEFT), + KEY(1, 2, KEY_ENTER), + KEY(2, 0, KEY_F6), + KEY(2, 1, KEY_F8), + KEY(2, 2, KEY_F9), + KEY(2, 3, KEY_F10), +}; + +static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = { + .keymap = mx27_3ds_keymap, + .keymap_size = ARRAY_SIZE(mx27_3ds_keymap), +}; + +static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + return request_irq(gpio_to_irq(SD1_CD), detect_irq, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data); +} + +static void mx27_3ds_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SD1_CD), data); +} + +static const struct imxmmc_platform_data sdhc1_pdata __initconst = { + .init = mx27_3ds_sdhc1_init, + .exit = mx27_3ds_sdhc1_exit, +}; + +static void mx27_3ds_sdhc1_enable_level_translator(void) +{ + /* Turn on TXB0108 OE pin */ + gpio_request(SD1_EN_GPIO, "sd1_enable"); + gpio_direction_output(SD1_EN_GPIO, 1); +} + + +static int otg_phy_init(void) +{ + gpio_request(OTG_PHY_RESET_GPIO, "usb-otg-reset"); + gpio_direction_output(OTG_PHY_RESET_GPIO, 0); + mdelay(1); + gpio_set_value(OTG_PHY_RESET_GPIO, 1); + return 0; +} + +static int mx27_3ds_otg_init(struct platform_device *pdev) +{ + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + +static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = mx27_3ds_otg_init, + .portsc = MXC_EHCI_MODE_ULPI, +}; + +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +static bool otg_mode_host __initdata; + +static int __init mx27_3ds_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = true; + else if (!strcmp(options, "device")) + otg_mode_host = false; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 1; +} +__setup("otg_mode=", mx27_3ds_otg_mode); + +/* Regulators */ +static struct regulator_init_data gpo_init = { + .constraints = { + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_consumer_supply vmmc1_consumers[] = { + REGULATOR_SUPPLY("vcore", "spi0.0"), +}; + +static struct regulator_init_data vmmc1_init = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers), + .consumer_supplies = vmmc1_consumers, +}; + +static struct regulator_consumer_supply vgen_consumers[] = { + REGULATOR_SUPPLY("vdd", "spi0.0"), +}; + +static struct regulator_init_data vgen_init = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(vgen_consumers), + .consumer_supplies = vgen_consumers, +}; + +static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { + { + .id = MC13783_REG_VMMC1, + .init_data = &vmmc1_init, + }, { + .id = MC13783_REG_VGEN, + .init_data = &vgen_init, + }, { + .id = MC13783_REG_GPO1, /* Turn on 1.8V */ + .init_data = &gpo_init, + }, { + .id = MC13783_REG_GPO3, /* Turn on 3.3V */ + .init_data = &gpo_init, + }, +}; + +/* MC13783 */ +static struct mc13xxx_codec_platform_data mx27_3ds_codec = { + .dac_ssi_port = MC13783_SSI1_PORT, + .adc_ssi_port = MC13783_SSI1_PORT, +}; + +static struct mc13xxx_platform_data mc13783_pdata = { + .regulators = { + .regulators = mx27_3ds_regulators, + .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), + + }, + .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | + MC13XXX_USE_CODEC, + .codec = &mx27_3ds_codec, +}; + +static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = { + .flags = IMX_SSI_DMA | IMX_SSI_NET, +}; + +/* SPI */ +static int spi1_chipselect[] = {SPI1_SS0}; + +static const struct spi_imx_master spi1_pdata __initconst = { + .chipselect = spi1_chipselect, + .num_chipselect = ARRAY_SIZE(spi1_chipselect), +}; + +static int spi2_chipselect[] = {SPI2_SS0}; + +static const struct spi_imx_master spi2_pdata __initconst = { + .chipselect = spi2_chipselect, + .num_chipselect = ARRAY_SIZE(spi2_chipselect), +}; + +static struct imx_fb_videomode mx27_3ds_modes[] = { + { /* 480x640 @ 60 Hz */ + .mode = { + .name = "Epson-VGA", + .refresh = 60, + .xres = 480, + .yres = 640, + .pixclock = 41701, + .left_margin = 20, + .right_margin = 41, + .upper_margin = 10, + .lower_margin = 5, + .hsync_len = 20, + .vsync_len = 10, + .sync = FB_SYNC_OE_ACT_HIGH | + FB_SYNC_CLK_INVERT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, + .bpp = 16, + .pcr = 0xFAC08B82, + }, +}; + +static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = { + .mode = mx27_3ds_modes, + .num_modes = ARRAY_SIZE(mx27_3ds_modes), + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, +}; + +/* LCD */ +static struct l4f00242t03_pdata mx27_3ds_lcd_pdata = { + .reset_gpio = LCD_RESET, + .data_enable_gpio = LCD_ENABLE, +}; + +static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { + { + .modalias = "mc13783", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, /* SS0 */ + .platform_data = &mc13783_pdata, + /* irq number is run-time assigned */ + .mode = SPI_CS_HIGH, + }, { + .modalias = "l4f00242t03", + .max_speed_hz = 5000000, + .bus_num = 0, + .chip_select = 0, /* SS0 */ + .platform_data = &mx27_3ds_lcd_pdata, + }, +}; + +static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = { + .bitrate = 100000, +}; + +static void __init mx27pdk_init(void) +{ + imx27_soc_init(); + + mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), + "mx27pdk"); + imx27_add_imx_uart0(&uart_pdata); + imx27_add_fec(NULL); + imx27_add_imx_keypad(&mx27_3ds_keymap_data); + imx27_add_imx2_wdt(); + + imx27_add_spi_imx1(&spi2_pdata); + imx27_add_spi_imx0(&spi1_pdata); + + imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); + imx27_add_imx_fb(&mx27_3ds_fb_data); + + imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata); +} + +static void __init mx27pdk_late_init(void) +{ + mx27_3ds_sdhc1_enable_level_translator(); + imx27_add_mxc_mmc(0, &sdhc1_pdata); + + otg_phy_init(); + + if (otg_mode_host) { + otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + + if (otg_pdata.otg) + imx27_add_mxc_ehci_otg(&otg_pdata); + } + + if (!otg_mode_host) + imx27_add_fsl_usb2_udc(&otg_device_pdata); + + mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT); + spi_register_board_info(mx27_3ds_spi_devs, + ARRAY_SIZE(mx27_3ds_spi_devs)); + + if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28))) + pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); + + + imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); +} + +static void __init mx27pdk_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +MACHINE_START(MX27_3DS, "Freescale MX27PDK") + /* maintainer: Freescale Semiconductor, Inc. */ + .atag_offset = 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .init_time = mx27pdk_timer_init, + .init_machine = mx27pdk_init, + .init_late = mx27pdk_late_init, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c new file mode 100644 index 000000000..a04bb094d --- /dev/null +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -0,0 +1,406 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/gpio/driver.h> +/* Needed for gpio_to_irq() */ +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/irq.h> + +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" + +/* + * Base address of PBC controller, CS4 + */ +#define PBC_BASE_ADDRESS 0xf4300000 +#define PBC_REG_ADDR(offset) (void __force __iomem *) \ + (PBC_BASE_ADDRESS + (offset)) + +/* When the PBC address connection is fixed in h/w, defined as 1 */ +#define PBC_ADDR_SH 0 + +/* Offsets for the PBC Controller register */ +/* + * PBC Board version register offset + */ +#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH) +/* + * PBC Board control register 1 set address. + */ +#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH) +/* + * PBC Board control register 1 clear address. + */ +#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH) + +/* PBC Board Control Register 1 bit definitions */ +#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */ + +/* to determine the correct external crystal reference */ +#define CKIH_27MHZ_BIT_SET (1 << 3) + +static const int mx27ads_pins[] __initconst = { + /* UART0 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* UART1 */ + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD, + /* UART2 */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE11_PF_UART3_RTS, + /* UART3 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + /* UART4 */ + PB18_AF_UART5_TXD, + PB19_AF_UART5_RXD, + PB20_AF_UART5_CTS, + PB21_AF_UART5_RTS, + /* UART5 */ + PB10_AF_UART6_TXD, + PB12_AF_UART6_CTS, + PB11_AF_UART6_RXD, + PB13_AF_UART6_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* I2C2 */ + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* FB */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA24_PF_REV, + PA25_PF_CLS, + PA26_PF_PS, + PA27_PF_SPL_SPR, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + /* OWIRE */ + PE16_AF_OWIRE, + /* SDHC1*/ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + /* SDHC2*/ + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, +}; + +static const struct mxc_nand_platform_data +mx27ads_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, +}; + +/* ADS's NOR flash */ +static struct physmap_flash_data mx27ads_flash_data = { + .width = 2, +}; + +static struct resource mx27ads_flash_resource = { + .start = 0xc0000000, + .end = 0xc0000000 + 0x02000000 - 1, + .flags = IORESOURCE_MEM, + +}; + +static struct platform_device mx27ads_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &mx27ads_flash_data, + }, + .num_resources = 1, + .resource = &mx27ads_flash_resource, +}; + +static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = { + .bitrate = 100000, +}; + +static struct i2c_board_info mx27ads_i2c_devices[] = { +}; + +static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (value) + imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); + else + imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); +} + +static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) +{ + return 0; +} + +#define MX27ADS_LCD_GPIO (6 * 32) + +static struct regulator_consumer_supply mx27ads_lcd_regulator_consumer = + REGULATOR_SUPPLY("lcd", "imx-fb.0"); + +static struct regulator_init_data mx27ads_lcd_regulator_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, +}, + .consumer_supplies = &mx27ads_lcd_regulator_consumer, + .num_consumer_supplies = 1, +}; + +static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = { + .supply_name = "LCD", + .microvolts = 3300000, + .gpio = MX27ADS_LCD_GPIO, + .init_data = &mx27ads_lcd_regulator_init_data, +}; + +static void __init mx27ads_regulator_init(void) +{ + struct gpio_chip *vchip; + + vchip = kzalloc(sizeof(*vchip), GFP_KERNEL); + vchip->owner = THIS_MODULE; + vchip->label = "LCD"; + vchip->base = MX27ADS_LCD_GPIO; + vchip->ngpio = 1; + vchip->direction_output = vgpio_dir_out; + vchip->set = vgpio_set; + gpiochip_add_data(vchip, NULL); + + platform_device_register_data(NULL, "reg-fixed-voltage", + PLATFORM_DEVID_AUTO, + &mx27ads_lcd_regulator_pdata, + sizeof(mx27ads_lcd_regulator_pdata)); +} + +static struct imx_fb_videomode mx27ads_modes[] = { + { + .mode = { + .name = "Sharp-LQ035Q7", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 188679, /* in ps (5.3MHz) */ + .hsync_len = 1, + .left_margin = 9, + .right_margin = 16, + .vsync_len = 1, + .upper_margin = 7, + .lower_margin = 9, + }, + .bpp = 16, + .pcr = 0xFB008BC0, + }, +}; + +static const struct imx_fb_platform_data mx27ads_fb_data __initconst = { + .mode = mx27ads_modes, + .num_modes = ARRAY_SIZE(mx27ads_modes), + + /* + * - HSYNC active high + * - VSYNC active high + * - clk notenabled while idle + * - clock inverted + * - data not inverted + * - data enable low active + * - enable sharp mode + */ + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, +}; + +static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq, + IRQF_TRIGGER_RISING, "sdhc1-card-detect", data); +} + +static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq, + IRQF_TRIGGER_RISING, "sdhc2-card-detect", data); +} + +static void mx27ads_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data); +} + +static void mx27ads_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data); +} + +static const struct imxmmc_platform_data sdhc1_pdata __initconst = { + .init = mx27ads_sdhc1_init, + .exit = mx27ads_sdhc1_exit, +}; + +static const struct imxmmc_platform_data sdhc2_pdata __initconst = { + .init = mx27ads_sdhc2_init, + .exit = mx27ads_sdhc2_exit, +}; + +static struct platform_device *platform_devices[] __initdata = { + &mx27ads_nor_mtd_device, +}; + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static void __init mx27ads_board_init(void) +{ + imx27_soc_init(); + + mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins), + "mx27ads"); + + imx27_add_imx_uart0(&uart_pdata); + imx27_add_imx_uart1(&uart_pdata); + imx27_add_imx_uart2(&uart_pdata); + imx27_add_imx_uart3(&uart_pdata); + imx27_add_imx_uart4(&uart_pdata); + imx27_add_imx_uart5(&uart_pdata); + imx27_add_mxc_nand(&mx27ads_nand_board_info); + + /* only the i2c master 1 is used on this CPU card */ + i2c_register_board_info(1, mx27ads_i2c_devices, + ARRAY_SIZE(mx27ads_i2c_devices)); + imx27_add_imx_i2c(1, &mx27ads_i2c1_data); + imx27_add_imx_fb(&mx27ads_fb_data); + + imx27_add_fec(NULL); + imx27_add_mxc_w1(); +} + +static void __init mx27ads_late_init(void) +{ + mx27ads_regulator_init(); + + imx27_add_mxc_mmc(0, &sdhc1_pdata); + imx27_add_mxc_mmc(1, &sdhc2_pdata); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mx27ads_timer_init(void) +{ + unsigned long fref = 26000000; + + if ((imx_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0) + fref = 27000000; + + mx27_clocks_init(fref); +} + +static struct map_desc mx27ads_io_desc[] __initdata = { + { + .virtual = PBC_BASE_ADDRESS, + .pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR), + .length = SZ_1M, + .type = MT_DEVICE, + }, +}; + +static void __init mx27ads_map_io(void) +{ + mx27_map_io(); + iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc)); +} + +MACHINE_START(MX27ADS, "Freescale i.MX27ADS") + /* maintainer: Freescale Semiconductor, Inc. */ + .atag_offset = 0x100, + .map_io = mx27ads_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .init_time = mx27ads_timer_init, + .init_machine = mx27ads_board_init, + .init_late = mx27ads_late_init, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c new file mode 100644 index 000000000..9d87f1dcf --- /dev/null +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -0,0 +1,619 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/mfd/mc13783.h> +#include <linux/spi/spi.h> +#include <linux/spi/l4f00242t03.h> +#include <linux/regulator/machine.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/memory.h> +#include <asm/mach/map.h> + +#include "3ds_debugboard.h" +#include "common.h" +#include "devices-imx31.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" + +static int mx31_3ds_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), + /*SPI0*/ + IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1), + /* SPI 1 */ + MX31_PIN_CSPI2_SCLK__SCLK, + MX31_PIN_CSPI2_MOSI__MOSI, + MX31_PIN_CSPI2_MISO__MISO, + MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI2_SS0__SS0, + MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */ + /* MC13783 IRQ */ + IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), + /* USB OTG reset */ + IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO), + /* USB OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, + MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, + MX31_PIN_USBOTG_STP__USBOTG_STP, + /*Keyboard*/ + MX31_PIN_KEY_ROW0_KEY_ROW0, + MX31_PIN_KEY_ROW1_KEY_ROW1, + MX31_PIN_KEY_ROW2_KEY_ROW2, + MX31_PIN_KEY_COL0_KEY_COL0, + MX31_PIN_KEY_COL1_KEY_COL1, + MX31_PIN_KEY_COL2_KEY_COL2, + MX31_PIN_KEY_COL3_KEY_COL3, + /* USB Host 2 */ + IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1), + /* USB Host2 reset */ + IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO), + /* I2C1 */ + MX31_PIN_I2C_CLK__I2C1_SCL, + MX31_PIN_I2C_DAT__I2C1_SDA, + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */ + MX31_PIN_GPIO3_0__GPIO3_0, /* OE */ + /* Framebuffer */ + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_CONTRAST__CONTRAST, + /* SSI */ + MX31_PIN_STXD4__STXD4, + MX31_PIN_SRXD4__SRXD4, + MX31_PIN_SCK4__SCK4, + MX31_PIN_SFS4__SFS4, +}; + +/* + * FB support + */ +static const struct fb_videomode fb_modedb[] = { + { /* 480x640 @ 60 Hz */ + .name = "Epson-VGA", + .refresh = 60, + .xres = 480, + .yres = 640, + .pixclock = 41701, + .left_margin = 20, + .right_margin = 41, + .upper_margin = 10, + .lower_margin = 5, + .hsync_len = 20, + .vsync_len = 10, + .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct mx3fb_platform_data mx3fb_pdata __initdata = { + .name = "Epson-VGA", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +/* LCD */ +static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = { + .reset_gpio = IOMUX_TO_GPIO(MX31_PIN_LCS1), + .data_enable_gpio = IOMUX_TO_GPIO(MX31_PIN_SER_RS), +}; + +/* + * Support for SD card slot in personality board + */ +#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1) +#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0) + +static struct gpio mx31_3ds_sdhc1_gpios[] = { + { MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" }, + { MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" }, +}; + +static int mx31_3ds_sdhc1_init(struct device *dev, + irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request_array(mx31_3ds_sdhc1_gpios, + ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); + if (ret) { + pr_warn("Unable to request the SD/MMC GPIOs.\n"); + return ret; + } + + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), + detect_irq, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "sdhc1-detect", data); + if (ret) { + pr_warn("Unable to request the SD/MMC card-detect IRQ.\n"); + goto gpio_free; + } + + return 0; + +gpio_free: + gpio_free_array(mx31_3ds_sdhc1_gpios, + ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); + return ret; +} + +static void mx31_3ds_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data); + gpio_free_array(mx31_3ds_sdhc1_gpios, + ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); +} + +static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd) +{ + /* + * While the voltage stuff is done by the driver, activate the + * Buffer Enable Pin only if there is a card in slot to fix the card + * voltage issue caused by bi-directional chip TXB0108 on 3Stack. + * Done here because at this stage we have for sure a debounced value + * of the presence of the card, showed by the value of vdd. + * 7 == ilog2(MMC_VDD_165_195) + */ + if (vdd > 7) + gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1); + else + gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0); +} + +static struct imxmmc_platform_data sdhc1_pdata = { + .init = mx31_3ds_sdhc1_init, + .exit = mx31_3ds_sdhc1_exit, + .setpower = mx31_3ds_sdhc1_setpower, +}; + +/* + * Matrix keyboard + */ + +static const uint32_t mx31_3ds_keymap[] = { + KEY(0, 0, KEY_UP), + KEY(0, 1, KEY_DOWN), + KEY(1, 0, KEY_RIGHT), + KEY(1, 1, KEY_LEFT), + KEY(1, 2, KEY_ENTER), + KEY(2, 0, KEY_F6), + KEY(2, 1, KEY_F8), + KEY(2, 2, KEY_F9), + KEY(2, 3, KEY_F10), +}; + +static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = { + .keymap = mx31_3ds_keymap, + .keymap_size = ARRAY_SIZE(mx31_3ds_keymap), +}; + +/* Regulators */ +static struct regulator_init_data pwgtx_init = { + .constraints = { + .boot_on = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data gpo_init = { + .constraints = { + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_consumer_supply vmmc2_consumers[] = { + REGULATOR_SUPPLY("vmmc", "imx31-mmc.0"), +}; + +static struct regulator_init_data vmmc2_init = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers), + .consumer_supplies = vmmc2_consumers, +}; + +static struct regulator_consumer_supply vmmc1_consumers[] = { + REGULATOR_SUPPLY("vcore", "spi0.0"), +}; + +static struct regulator_init_data vmmc1_init = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers), + .consumer_supplies = vmmc1_consumers, +}; + +static struct regulator_consumer_supply vgen_consumers[] = { + REGULATOR_SUPPLY("vdd", "spi0.0"), +}; + +static struct regulator_init_data vgen_init = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vgen_consumers), + .consumer_supplies = vgen_consumers, +}; + +static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { + { + .id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */ + .init_data = &pwgtx_init, + }, { + .id = MC13783_REG_PWGT2SPI, /* Power Gate for L2 Cache. */ + .init_data = &pwgtx_init, + }, { + + .id = MC13783_REG_GPO1, /* Turn on 1.8V */ + .init_data = &gpo_init, + }, { + .id = MC13783_REG_GPO3, /* Turn on 3.3V */ + .init_data = &gpo_init, + }, { + .id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */ + .init_data = &vmmc2_init, + }, { + .id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */ + .init_data = &vmmc1_init, + }, { + .id = MC13783_REG_VGEN, /* Power LCD */ + .init_data = &vgen_init, + }, +}; + +/* MC13783 */ +static struct mc13xxx_codec_platform_data mx31_3ds_codec = { + .dac_ssi_port = MC13783_SSI1_PORT, + .adc_ssi_port = MC13783_SSI1_PORT, +}; + +static struct mc13xxx_platform_data mc13783_pdata = { + .regulators = { + .regulators = mx31_3ds_regulators, + .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), + }, + .codec = &mx31_3ds_codec, + .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | MC13XXX_USE_CODEC, + +}; + +static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = { + .flags = IMX_SSI_DMA | IMX_SSI_NET, +}; + +/* SPI */ +static const struct spi_imx_master spi0_pdata __initconst = { + .num_chipselect = 3, +}; + +static const struct spi_imx_master spi1_pdata __initconst = { + .num_chipselect = 3, +}; + +static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { + { + .modalias = "mc13783", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 2, /* SS2 */ + .platform_data = &mc13783_pdata, + /* irq number is run-time assigned */ + .mode = SPI_CS_HIGH, + }, { + .modalias = "l4f00242t03", + .max_speed_hz = 5000000, + .bus_num = 0, + .chip_select = 2, /* SS2 */ + .platform_data = &mx31_3ds_l4f00242t03_pdata, + }, +}; + +/* + * NAND Flash + */ +static const struct mxc_nand_platform_data +mx31_3ds_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, +#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT + .flash_bbt = 1, +#endif +}; + +/* + * USB OTG + */ + +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR) +#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP) + +static int mx31_3ds_usbotg_init(void) +{ + int err; + + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); + + err = gpio_request(USBOTG_RST_B, "otgusb-reset"); + if (err) { + pr_err("Failed to request the USB OTG reset gpio\n"); + return err; + } + + err = gpio_direction_output(USBOTG_RST_B, 0); + if (err) { + pr_err("Failed to drive the USB OTG reset gpio\n"); + goto usbotg_free_reset; + } + + mdelay(1); + gpio_set_value(USBOTG_RST_B, 1); + return 0; + +usbotg_free_reset: + gpio_free(USBOTG_RST_B); + return err; +} + +static int mx31_3ds_otg_init(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} + +static int mx31_3ds_host2_init(struct platform_device *pdev) +{ + int err; + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG); + + err = gpio_request(USBH2_RST_B, "usbh2-reset"); + if (err) { + pr_err("Failed to request the USB Host 2 reset gpio\n"); + return err; + } + + err = gpio_direction_output(USBH2_RST_B, 0); + if (err) { + pr_err("Failed to drive the USB Host 2 reset gpio\n"); + goto usbotg_free_reset; + } + + mdelay(1); + gpio_set_value(USBH2_RST_B, 1); + + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); + +usbotg_free_reset: + gpio_free(USBH2_RST_B); + return err; +} + +static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = mx31_3ds_otg_init, + .portsc = MXC_EHCI_MODE_ULPI, +}; + +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = mx31_3ds_host2_init, + .portsc = MXC_EHCI_MODE_ULPI, +}; + +static const struct fsl_usb2_platform_data usbotg_pdata __initconst = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +static bool otg_mode_host __initdata; + +static int __init mx31_3ds_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = true; + else if (!strcmp(options, "device")) + otg_mode_host = false; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 1; +} +__setup("otg_mode=", mx31_3ds_otg_mode); + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = { + .bitrate = 100000, +}; + +static void __init mx31_3ds_init(void) +{ + imx31_soc_init(); + + /* Configure SPI1 IOMUX */ + mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true); + + mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), + "mx31_3ds"); + + imx31_add_imx_uart0(&uart_pdata); + imx31_add_mxc_nand(&mx31_3ds_nand_board_info); + + imx31_add_spi_imx1(&spi1_pdata); + + imx31_add_imx_keypad(&mx31_3ds_keymap_data); + + imx31_add_imx2_wdt(); + imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); + + imx31_add_spi_imx0(&spi0_pdata); + imx31_add_ipu_core(); + imx31_add_mx3_sdc_fb(&mx3fb_pdata); + + imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata); + + imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); +} + +static void __init mx31_3ds_late(void) +{ + mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); + spi_register_board_info(mx31_3ds_spi_devs, + ARRAY_SIZE(mx31_3ds_spi_devs)); + + mx31_3ds_usbotg_init(); + if (otg_mode_host) { + otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (otg_pdata.otg) + imx31_add_mxc_ehci_otg(&otg_pdata); + } + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbh2_pdata.otg) + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); + + if (!otg_mode_host) + imx31_add_fsl_usb2_udc(&usbotg_pdata); + + if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1))) + printk(KERN_WARNING "Init of the debug board failed, all " + "devices on the debug board are unusable.\n"); + + imx31_add_mxc_mmc(0, &sdhc1_pdata); +} + +static void __init mx31_3ds_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") + /* Maintainer: Freescale Semiconductor, Inc. */ + .atag_offset = 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .init_time = mx31_3ds_timer_init, + .init_machine = mx31_3ds_init, + .init_late = mx31_3ds_late, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c new file mode 100644 index 000000000..766b8b93f --- /dev/null +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -0,0 +1,588 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/serial_8250.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/memory.h> +#include <asm/mach/map.h> + +#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 +#include <linux/mfd/wm8350/audio.h> +#include <linux/mfd/wm8350/core.h> +#include <linux/mfd/wm8350/pmic.h> +#endif + +#include "common.h" +#include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" + +/* Base address of PBC controller */ +#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT + +/* PBC Board interrupt status register */ +#define PBC_INTSTATUS 0x000016 + +/* PBC Board interrupt current status register */ +#define PBC_INTCURR_STATUS 0x000018 + +/* PBC Interrupt mask register set address */ +#define PBC_INTMASK_SET 0x00001A + +/* PBC Interrupt mask register clear address */ +#define PBC_INTMASK_CLEAR 0x00001C + +/* External UART A */ +#define PBC_SC16C652_UARTA 0x010000 + +/* External UART B */ +#define PBC_SC16C652_UARTB 0x010010 + +#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) +#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) +#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) + +#define EXPIO_INT_XUART_INTA 10 +#define EXPIO_INT_XUART_INTB 11 + +#define MXC_MAX_EXP_IO_LINES 16 + +/* CS8900 */ +#define EXPIO_INT_ENET_INT 8 +#define CS4_CS8900_MMIO_START 0x20000 + +static struct irq_domain *domain; + +/* + * The serial port definition structure. + */ +static struct plat_serial8250_port serial_platform_data[] = { + { + .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA), + .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA), + .uartclk = 14745600, + .regshift = 0, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ, + }, { + .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB), + .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB), + .uartclk = 14745600, + .regshift = 0, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ, + }, + {}, +}; + +static struct platform_device serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_platform_data, + }, +}; + +static struct resource mx31ads_cs8900_resources[] __initdata = { + DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K), + DEFINE_RES_IRQ(-1), +}; + +static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = { + .name = "cs89x0", + .id = 0, + .res = mx31ads_cs8900_resources, + .num_res = ARRAY_SIZE(mx31ads_cs8900_resources), +}; + +static int __init mxc_init_extuart(void) +{ + serial_platform_data[0].irq = irq_find_mapping(domain, + EXPIO_INT_XUART_INTA); + serial_platform_data[1].irq = irq_find_mapping(domain, + EXPIO_INT_XUART_INTB); + return platform_device_register(&serial_device); +} + +static void __init mxc_init_ext_ethernet(void) +{ + mx31ads_cs8900_resources[1].start = + irq_find_mapping(domain, EXPIO_INT_ENET_INT); + mx31ads_cs8900_resources[1].end = + irq_find_mapping(domain, EXPIO_INT_ENET_INT); + platform_device_register_full( + (struct platform_device_info *)&mx31ads_cs8900_devinfo); +} + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static unsigned int uart_pins[] = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1 +}; + +static inline void mxc_init_imx_uart(void) +{ + mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); + imx31_add_imx_uart0(&uart_pdata); +} + +static void mx31ads_expio_irq_handler(struct irq_desc *desc) +{ + u32 imr_val; + u32 int_valid; + u32 expio_irq; + + imr_val = imx_readw(PBC_INTMASK_SET_REG); + int_valid = imx_readw(PBC_INTSTATUS_REG) & imr_val; + + expio_irq = 0; + for (; int_valid != 0; int_valid >>= 1, expio_irq++) { + if ((int_valid & 1) == 0) + continue; + + generic_handle_irq(irq_find_mapping(domain, expio_irq)); + } +} + +/* + * Disable an expio pin's interrupt by setting the bit in the imr. + * @param d an expio virtual irq description + */ +static void expio_mask_irq(struct irq_data *d) +{ + u32 expio = d->hwirq; + /* mask the interrupt */ + imx_writew(1 << expio, PBC_INTMASK_CLEAR_REG); + imx_readw(PBC_INTMASK_CLEAR_REG); +} + +/* + * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr. + * @param d an expio virtual irq description + */ +static void expio_ack_irq(struct irq_data *d) +{ + u32 expio = d->hwirq; + /* clear the interrupt status */ + imx_writew(1 << expio, PBC_INTSTATUS_REG); +} + +/* + * Enable a expio pin's interrupt by clearing the bit in the imr. + * @param d an expio virtual irq description + */ +static void expio_unmask_irq(struct irq_data *d) +{ + u32 expio = d->hwirq; + /* unmask the interrupt */ + imx_writew(1 << expio, PBC_INTMASK_SET_REG); +} + +static struct irq_chip expio_irq_chip = { + .name = "EXPIO(CPLD)", + .irq_ack = expio_ack_irq, + .irq_mask = expio_mask_irq, + .irq_unmask = expio_unmask_irq, +}; + +static void __init mx31ads_init_expio(void) +{ + int irq_base; + int i, irq; + + printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n"); + + /* + * Configure INT line as GPIO input + */ + mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); + + /* disable the interrupt and clear the status */ + imx_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); + imx_writew(0xFFFF, PBC_INTSTATUS_REG); + + irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); + WARN_ON(irq_base < 0); + + domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) { + irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); + irq_clear_status_flags(i, IRQ_NOREQUEST); + } + irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_4)); + irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH); + irq_set_chained_handler(irq, mx31ads_expio_irq_handler); +} + +#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 +/* This section defines setup for the Wolfson Microelectronics + * 1133-EV1 PMU/audio board. When other PMU boards are supported the + * regulator definitions may be shared with them, but for now they can + * only be used with this board so would generate warnings about + * unused statics and some of the configuration is specific to this + * module. + */ + +/* CPU */ +static struct regulator_consumer_supply sw1a_consumers[] = { + { + .supply = "cpu_vcc", + } +}; + +static struct regulator_init_data sw1a_data = { + .constraints = { + .name = "SW1A", + .min_uV = 1275000, + .max_uV = 1600000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_FAST, + .state_mem = { + .uV = 1400000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + .initial_state = PM_SUSPEND_MEM, + .always_on = 1, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(sw1a_consumers), + .consumer_supplies = sw1a_consumers, +}; + +/* System IO - High */ +static struct regulator_init_data viohi_data = { + .constraints = { + .name = "VIOHO", + .min_uV = 2800000, + .max_uV = 2800000, + .state_mem = { + .uV = 2800000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + .initial_state = PM_SUSPEND_MEM, + .always_on = 1, + .boot_on = 1, + }, +}; + +/* System IO - Low */ +static struct regulator_init_data violo_data = { + .constraints = { + .name = "VIOLO", + .min_uV = 1800000, + .max_uV = 1800000, + .state_mem = { + .uV = 1800000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + .initial_state = PM_SUSPEND_MEM, + .always_on = 1, + .boot_on = 1, + }, +}; + +/* DDR RAM */ +static struct regulator_init_data sw2a_data = { + .constraints = { + .name = "SW2A", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .state_mem = { + .uV = 1800000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + .state_disk = { + .mode = REGULATOR_MODE_NORMAL, + .enabled = 0, + }, + .always_on = 1, + .boot_on = 1, + .initial_state = PM_SUSPEND_MEM, + }, +}; + +static struct regulator_init_data ldo1_data = { + .constraints = { + .name = "VCAM/VMMC1/VMMC2", + .min_uV = 2800000, + .max_uV = 2800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + }, +}; + +static struct regulator_consumer_supply ldo2_consumers[] = { + { .supply = "AVDD", .dev_name = "1-001a" }, + { .supply = "HPVDD", .dev_name = "1-001a" }, +}; + +/* CODEC and SIM */ +static struct regulator_init_data ldo2_data = { + .constraints = { + .name = "VESIM/VSIM/AVDD", + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers), + .consumer_supplies = ldo2_consumers, +}; + +/* General */ +static struct regulator_init_data vdig_data = { + .constraints = { + .name = "VDIG", + .min_uV = 1500000, + .max_uV = 1500000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + .always_on = 1, + .boot_on = 1, + }, +}; + +/* Tranceivers */ +static struct regulator_init_data ldo4_data = { + .constraints = { + .name = "VRF1/CVDD_2.775", + .min_uV = 2500000, + .max_uV = 2500000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + .always_on = 1, + .boot_on = 1, + }, +}; + +static struct wm8350_led_platform_data wm8350_led_data = { + .name = "wm8350:white", + .default_trigger = "heartbeat", + .max_uA = 27899, +}; + +static struct wm8350_audio_platform_data imx32ads_wm8350_setup = { + .vmid_discharge_msecs = 1000, + .drain_msecs = 30, + .cap_discharge_msecs = 700, + .vmid_charge_msecs = 700, + .vmid_s_curve = WM8350_S_CURVE_SLOW, + .dis_out4 = WM8350_DISCHARGE_SLOW, + .dis_out3 = WM8350_DISCHARGE_SLOW, + .dis_out2 = WM8350_DISCHARGE_SLOW, + .dis_out1 = WM8350_DISCHARGE_SLOW, + .vroi_out4 = WM8350_TIE_OFF_500R, + .vroi_out3 = WM8350_TIE_OFF_500R, + .vroi_out2 = WM8350_TIE_OFF_500R, + .vroi_out1 = WM8350_TIE_OFF_500R, + .vroi_enable = 0, + .codec_current_on = WM8350_CODEC_ISEL_1_0, + .codec_current_standby = WM8350_CODEC_ISEL_0_5, + .codec_current_charge = WM8350_CODEC_ISEL_1_5, +}; + +static int mx31_wm8350_init(struct wm8350 *wm8350) +{ + wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN, + WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW, + WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF, + WM8350_GPIO_DEBOUNCE_ON); + + wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN, + WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH, + WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF, + WM8350_GPIO_DEBOUNCE_ON); + + wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN, + WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH, + WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF, + WM8350_GPIO_DEBOUNCE_OFF); + + wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN, + WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH, + WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF, + WM8350_GPIO_DEBOUNCE_OFF); + + wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT, + WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH, + WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF, + WM8350_GPIO_DEBOUNCE_OFF); + + wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT, + WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW, + WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF, + WM8350_GPIO_DEBOUNCE_OFF); + + wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT, + WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW, + WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF, + WM8350_GPIO_DEBOUNCE_OFF); + + wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data); + wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data); + wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data); + wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data); + wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data); + wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data); + wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data); + wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data); + + /* LEDs */ + wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1, + WM8350_DC5_ERRACT_SHUTDOWN_CONV); + wm8350_isink_set_flash(wm8350, WM8350_ISINK_A, + WM8350_ISINK_FLASH_DISABLE, + WM8350_ISINK_FLASH_TRIG_BIT, + WM8350_ISINK_FLASH_DUR_32MS, + WM8350_ISINK_FLASH_ON_INSTANT, + WM8350_ISINK_FLASH_OFF_INSTANT, + WM8350_ISINK_FLASH_MODE_EN); + wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5, + WM8350_ISINK_MODE_BOOST, + WM8350_ISINK_ILIM_NORMAL, + WM8350_DC5_RMP_20V, + WM8350_DC5_FBSRC_ISINKA); + wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A, + &wm8350_led_data); + + wm8350->codec.platform_data = &imx32ads_wm8350_setup; + + regulator_has_full_constraints(); + + return 0; +} + +static struct wm8350_platform_data __initdata mx31_wm8350_pdata = { + .init = mx31_wm8350_init, +}; +#endif + +static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { +#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 + { + I2C_BOARD_INFO("wm8350", 0x1a), + .platform_data = &mx31_wm8350_pdata, + /* irq number is run-time assigned */ + }, +#endif +}; + +static void __init mxc_init_i2c(void) +{ +#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 + mx31ads_i2c1_devices[0].irq = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); +#endif + i2c_register_board_info(1, mx31ads_i2c1_devices, + ARRAY_SIZE(mx31ads_i2c1_devices)); + + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1)); + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1)); + + imx31_add_imx_i2c1(NULL); +} + +static unsigned int ssi_pins[] = { + MX31_PIN_SFS5__SFS5, + MX31_PIN_SCK5__SCK5, + MX31_PIN_SRXD5__SRXD5, + MX31_PIN_STXD5__STXD5, +}; + +static void __init mxc_init_audio(void) +{ + imx31_add_imx_ssi(0, NULL); + mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); +} + +/* + * Static mappings, starting from the CS4 start address up to the start address + * of the CS8900. + */ +static struct map_desc mx31ads_io_desc[] __initdata = { + { + .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), + .length = CS4_CS8900_MMIO_START, + .type = MT_DEVICE + }, +}; + +static void __init mx31ads_map_io(void) +{ + mx31_map_io(); + iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc)); +} + +static void __init mx31ads_init(void) +{ + imx31_soc_init(); + + mxc_init_imx_uart(); + mxc_init_audio(); +} + +static void __init mx31ads_late(void) +{ + mx31ads_init_expio(); + mxc_init_extuart(); + mxc_init_i2c(); + mxc_init_ext_ethernet(); +} + +static void __init mx31ads_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +MACHINE_START(MX31ADS, "Freescale MX31ADS") + /* Maintainer: Freescale Semiconductor, Inc. */ + .atag_offset = 0x100, + .map_io = mx31ads_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .init_time = mx31ads_timer_init, + .init_machine = mx31ads_init, + .init_late = mx31ads_late, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c new file mode 100644 index 000000000..8bf52819d --- /dev/null +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -0,0 +1,331 @@ +/* + * LILLY-1131 module support + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * based on code for other MX31 boards, + * + * Copyright 2005-2007 Freescale Semiconductor + * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include <linux/smsc911x.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/mfd/mc13783.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include "board-mx31lilly.h" +#include "common.h" +#include "devices-imx31.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" + +/* + * This file contains module-specific initialization routines for LILLY-1131. + * Initialization of peripherals found on the baseboard is implemented in the + * appropriate baseboard support code. + */ + +static unsigned int mx31lilly_pins[] __initdata = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + MX31_PIN_CSPI3_MOSI__RXD3, + MX31_PIN_CSPI3_MISO__TXD3, + MX31_PIN_CSPI3_SCLK__RTS3, + MX31_PIN_CSPI3_SPI_RDY__CTS3, +}; + +/* UART */ +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* SMSC ethernet support */ + +static struct resource smsc91x_resources[] = { + { + .start = MX31_CS4_BASE_ADDR, + .end = MX31_CS4_BASE_ADDR + 0xffff, + .flags = IORESOURCE_MEM, + }, + { + /* irq number is run-time assigned */ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, + } +}; + +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT | + SMSC911X_SAVE_MAC_ADDRESS | + SMSC911X_FORCE_INTERNAL_PHY, +}; + +static struct platform_device smsc91x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc91x_resources), + .resource = smsc91x_resources, + .dev = { + .platform_data = &smsc911x_config, + } +}; + +/* NOR flash */ +static struct physmap_flash_data nor_flash_data = { + .width = 2, +}; + +static struct resource nor_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device physmap_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &nor_flash_data, + }, + .resource = &nor_flash_resource, + .num_resources = 1, +}; + +/* USB */ + +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int usbh1_init(struct platform_device *pdev) +{ + int pins[] = { + MX31_PIN_CSPI1_MOSI__USBH1_RXDM, + MX31_PIN_CSPI1_MISO__USBH1_RXDP, + MX31_PIN_CSPI1_SS0__USBH1_TXDM, + MX31_PIN_CSPI1_SS1__USBH1_TXDP, + MX31_PIN_CSPI1_SS2__USBH1_RCV, + MX31_PIN_CSPI1_SCLK__USBH1_OEB, + MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, + }; + + mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1"); + + mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); + + mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); + + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_SINGLE_UNI); +} + +static int usbh2_init(struct platform_device *pdev) +{ + int pins[] = { + MX31_PIN_USBH2_DATA0__USBH2_DATA0, + MX31_PIN_USBH2_DATA1__USBH2_DATA1, + MX31_PIN_USBH2_CLK__USBH2_CLK, + MX31_PIN_USBH2_DIR__USBH2_DIR, + MX31_PIN_USBH2_NXT__USBH2_NXT, + MX31_PIN_USBH2_STP__USBH2_STP, + }; + + mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2"); + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); + + mxc_iomux_set_gpr(MUX_PGP_UH2, true); + + /* chip select */ + mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO), + "USBH2_CS"); + gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS"); + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0); + + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} + +static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { + .init = usbh1_init, + .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, +}; + +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = usbh2_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, +}; + +static void __init lilly1131_usb_init(void) +{ + imx31_add_mxc_ehci_hs(1, &usbh1_pdata); + + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbh2_pdata.otg) + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); +} + +/* SPI */ + +static const struct spi_imx_master spi0_pdata __initconst = { + .num_chipselect = 3, +}; + +static const struct spi_imx_master spi1_pdata __initconst = { + .num_chipselect = 3, +}; + +static struct mc13xxx_platform_data mc13783_pdata __initdata = { + .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN, +}; + +static struct spi_board_info mc13783_dev __initdata = { + .modalias = "mc13783", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, + .platform_data = &mc13783_pdata, + /* irq number is run-time assigned */ +}; + +static struct platform_device *devices[] __initdata = { + &smsc91x_device, + &physmap_flash_device, +}; + +static int mx31lilly_baseboard; +core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); + +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + +static void __init mx31lilly_board_init(void) +{ + imx31_soc_init(); + + mxc_iomux_setup_multiple_pins(mx31lilly_pins, + ARRAY_SIZE(mx31lilly_pins), "mx31lily"); + + imx31_add_imx_uart0(&uart_pdata); + imx31_add_imx_uart1(&uart_pdata); + imx31_add_imx_uart2(&uart_pdata); + + mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS"); + + /* SPI */ + mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2"); + + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2"); + + imx31_add_spi_imx0(&spi0_pdata); + imx31_add_spi_imx1(&spi1_pdata); + + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); +} + +static void __init mx31lilly_late_init(void) +{ + if (mx31lilly_baseboard == MX31LILLY_DB) + mx31lilly_db_init(); + + mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); + spi_register_board_info(&mc13783_dev, 1); + + smsc91x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + smsc91x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + platform_add_devices(devices, ARRAY_SIZE(devices)); + + /* USB */ + lilly1131_usb_init(); +} + +static void __init mx31lilly_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +MACHINE_START(LILLY1131, "INCO startec LILLY-1131") + .atag_offset = 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .init_time = mx31lilly_timer_init, + .init_machine = mx31lilly_board_init, + .init_late = mx31lilly_late_init, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c new file mode 100644 index 000000000..a3cbba6c9 --- /dev/null +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -0,0 +1,314 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/memory.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/moduleparam.h> +#include <linux/smsc911x.h> +#include <linux/mfd/mc13783.h> +#include <linux/spi/spi.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/mtd/physmap.h> +#include <linux/delay.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <asm/page.h> +#include <asm/setup.h> + +#include "board-mx31lite.h" +#include "common.h" +#include "devices-imx31.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" + +/* + * This file contains the module-specific initialization routines. + */ + +static unsigned int mx31lite_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* SPI 0 */ + MX31_PIN_CSPI1_SCLK__SCLK, + MX31_PIN_CSPI1_MOSI__MOSI, + MX31_PIN_CSPI1_MISO__MISO, + MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI1_SS0__SS0, + MX31_PIN_CSPI1_SS1__SS1, + MX31_PIN_CSPI1_SS2__SS2, + /* LAN9117 IRQ pin */ + IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), + /* SPI 1 */ + MX31_PIN_CSPI2_SCLK__SCLK, + MX31_PIN_CSPI2_MOSI__MOSI, + MX31_PIN_CSPI2_MISO__MISO, + MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI2_SS0__SS0, + MX31_PIN_CSPI2_SS1__SS1, + MX31_PIN_CSPI2_SS2__SS2, +}; + +/* UART */ +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* SPI */ +static const struct spi_imx_master spi0_pdata __initconst = { + .num_chipselect = 3, +}; + +static const struct mxc_nand_platform_data +mx31lite_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT, +}; + +static struct resource smsc911x_resources[] = { + { + .start = MX31_CS4_BASE_ADDR, + .end = MX31_CS4_BASE_ADDR + 0x100, + .flags = IORESOURCE_MEM, + }, { + /* irq number is run-time assigned */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +/* + * SPI + * + * The MC13783 is the only hard-wired SPI device on the module. + */ + +static const struct spi_imx_master spi1_pdata __initconst = { + .num_chipselect = 1, +}; + +static struct mc13xxx_platform_data mc13783_pdata __initdata = { + .flags = MC13XXX_USE_RTC, +}; + +static struct spi_board_info mc13783_spi_dev __initdata = { + .modalias = "mc13783", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, + .platform_data = &mc13783_pdata, + /* irq number is run-time assigned */ +}; + +/* + * USB + */ + +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int usbh2_init(struct platform_device *pdev) +{ + int pins[] = { + MX31_PIN_USBH2_DATA0__USBH2_DATA0, + MX31_PIN_USBH2_DATA1__USBH2_DATA1, + MX31_PIN_USBH2_CLK__USBH2_CLK, + MX31_PIN_USBH2_DIR__USBH2_DIR, + MX31_PIN_USBH2_NXT__USBH2_NXT, + MX31_PIN_USBH2_STP__USBH2_STP, + }; + + mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2"); + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); + + mxc_iomux_set_gpr(MUX_PGP_UH2, true); + + /* chip select */ + mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO), + "USBH2_CS"); + gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS"); + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0); + + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} + +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = usbh2_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, +}; + +/* + * NOR flash + */ + +static struct physmap_flash_data nor_flash_data = { + .width = 2, +}; + +static struct resource nor_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device physmap_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &nor_flash_data, + }, + .resource = &nor_flash_resource, + .num_resources = 1, +}; + +/* + * This structure defines the MX31 memory map. + */ +static struct map_desc mx31lite_io_desc[] __initdata = { + { + .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), + .length = MX31_CS4_SIZE, + .type = MT_DEVICE + } +}; + +/* + * Set up static virtual mappings. + */ +static void __init mx31lite_map_io(void) +{ + mx31_map_io(); + iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc)); +} + +static int mx31lite_baseboard; +core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444); + +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + +static void __init mx31lite_init(void) +{ + imx31_soc_init(); + + mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins), + "mx31lite"); + + imx31_add_imx_uart0(&uart_pdata); + imx31_add_spi_imx0(&spi0_pdata); + + /* NOR and NAND flash */ + platform_device_register(&physmap_flash_device); + imx31_add_mxc_nand(&mx31lite_nand_board_info); + + imx31_add_spi_imx1(&spi1_pdata); + + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); +} + +static void __init mx31lite_late(void) +{ + int ret; + + if (mx31lite_baseboard == MX31LITE_DB) + mx31lite_db_init(); + + mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); + spi_register_board_info(&mc13783_spi_dev, 1); + + /* USB */ + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbh2_pdata.otg) + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); + + /* SMSC9117 IRQ pin */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); + if (ret) + pr_warn("could not get LAN irq gpio\n"); + else { + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6)); + smsc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6)); + smsc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6)); + platform_device_register(&smsc911x_device); + } +} + +static void __init mx31lite_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") + /* Maintainer: Freescale Semiconductor, Inc. */ + .atag_offset = 0x100, + .map_io = mx31lite_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .init_time = mx31lite_timer_init, + .init_machine = mx31lite_init, + .init_late = mx31lite_late, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c new file mode 100644 index 000000000..643a3d749 --- /dev/null +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -0,0 +1,599 @@ +/* + * Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/gfp.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include <linux/leds.h> +#include <linux/memory.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/mc13783.h> +#include <linux/spi/spi.h> +#include <linux/types.h> +#include <linux/memblock.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/input.h> + +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <asm/memblock.h> +#include <linux/platform_data/asoc-imx-ssi.h> + +#include "board-mx31moboard.h" +#include "common.h" +#include "devices-imx31.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" + +static unsigned int moboard_pins[] = { + /* UART0 */ + MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, + MX31_PIN_CTS1__GPIO2_7, + /* UART4 */ + MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5, + MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5, + /* I2C0 */ + MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL, + /* I2C1 */ + MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL, + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD, + MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27, + /* USB reset */ + MX31_PIN_GPIO1_0__GPIO1_0, + /* USB OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, + MX31_PIN_USB_OC__GPIO1_30, + /* USB H2 */ + MX31_PIN_USBH2_DATA0__USBH2_DATA0, + MX31_PIN_USBH2_DATA1__USBH2_DATA1, + MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3, + MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5, + MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7, + MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR, + MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP, + MX31_PIN_SCK6__GPIO1_25, + /* LEDs */ + MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1, + MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3, + /* SPI1 */ + MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO, + MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2, + /* Atlas IRQ */ + MX31_PIN_GPIO1_3__GPIO1_3, + /* SPI2 */ + MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO, + MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI2_SS1__CSPI3_SS1, + /* SSI */ + MX31_PIN_STXD4__STXD4, MX31_PIN_SRXD4__SRXD4, + MX31_PIN_SCK4__SCK4, MX31_PIN_SFS4__SFS4, +}; + +static struct physmap_flash_data mx31moboard_flash_data = { + .width = 2, +}; + +static struct resource mx31moboard_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mx31moboard_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &mx31moboard_flash_data, + }, + .resource = &mx31moboard_flash_resource, + .num_resources = 1, +}; + +static void __init moboard_uart0_init(void) +{ + if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack")) { + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0); + gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1)); + } +} + +static const struct imxuart_platform_data uart0_pdata __initconst = { +}; + +static const struct imxuart_platform_data uart4_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static const struct imxi2c_platform_data moboard_i2c0_data __initconst = { + .bitrate = 400000, +}; + +static const struct imxi2c_platform_data moboard_i2c1_data __initconst = { + .bitrate = 100000, +}; + +static const struct spi_imx_master moboard_spi1_pdata __initconst = { + .num_chipselect = 3, +}; + +static struct regulator_consumer_supply sdhc_consumers[] = { + { + .dev_name = "imx31-mmc.0", + .supply = "sdhc0_vcc", + }, + { + .dev_name = "imx31-mmc.1", + .supply = "sdhc1_vcc", + }, +}; + +static struct regulator_init_data sdhc_vreg_data = { + .constraints = { + .min_uV = 2700000, + .max_uV = 3000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_FAST, + .always_on = 0, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(sdhc_consumers), + .consumer_supplies = sdhc_consumers, +}; + +static struct regulator_consumer_supply cam_consumers[] = { + { + .dev_name = "mx3_camera.0", + .supply = "cam_vcc", + }, +}; + +static struct regulator_init_data cam_vreg_data = { + .constraints = { + .min_uV = 2700000, + .max_uV = 3000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_FAST, + .always_on = 0, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(cam_consumers), + .consumer_supplies = cam_consumers, +}; + +static struct mc13xxx_regulator_init_data moboard_regulators[] = { + { + .id = MC13783_REG_VMMC1, + .init_data = &sdhc_vreg_data, + }, + { + .id = MC13783_REG_VCAM, + .init_data = &cam_vreg_data, + }, +}; + +static struct mc13xxx_led_platform_data moboard_led[] = { + { + .id = MC13783_LED_R1, + .name = "coreboard-led-4:red", + }, + { + .id = MC13783_LED_G1, + .name = "coreboard-led-4:green", + }, + { + .id = MC13783_LED_B1, + .name = "coreboard-led-4:blue", + }, + { + .id = MC13783_LED_R2, + .name = "coreboard-led-5:red", + }, + { + .id = MC13783_LED_G2, + .name = "coreboard-led-5:green", + }, + { + .id = MC13783_LED_B2, + .name = "coreboard-led-5:blue", + }, +}; + +static struct mc13xxx_leds_platform_data moboard_leds = { + .num_leds = ARRAY_SIZE(moboard_led), + .led = moboard_led, + .led_control[0] = MC13783_LED_C0_ENABLE | MC13783_LED_C0_ABMODE(0), + .led_control[1] = MC13783_LED_C1_SLEWLIM, + .led_control[2] = MC13783_LED_C2_SLEWLIM, + .led_control[3] = MC13783_LED_C3_PERIOD(0) | + MC13783_LED_C3_CURRENT_R1(2) | + MC13783_LED_C3_CURRENT_G1(2) | + MC13783_LED_C3_CURRENT_B1(2), + .led_control[4] = MC13783_LED_C4_PERIOD(0) | + MC13783_LED_C4_CURRENT_R2(3) | + MC13783_LED_C4_CURRENT_G2(3) | + MC13783_LED_C4_CURRENT_B2(3), +}; + +static struct mc13xxx_buttons_platform_data moboard_buttons = { + .b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE | + MC13783_BUTTON_POL_INVERT, + .b1on_key = KEY_POWER, +}; + +static struct mc13xxx_codec_platform_data moboard_codec = { + .dac_ssi_port = MC13783_SSI1_PORT, + .adc_ssi_port = MC13783_SSI1_PORT, +}; + +static struct mc13xxx_platform_data moboard_pmic = { + .regulators = { + .regulators = moboard_regulators, + .num_regulators = ARRAY_SIZE(moboard_regulators), + }, + .leds = &moboard_leds, + .buttons = &moboard_buttons, + .codec = &moboard_codec, + .flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC | MC13XXX_USE_CODEC, +}; + +static struct imx_ssi_platform_data moboard_ssi_pdata = { + .flags = IMX_SSI_DMA | IMX_SSI_NET, +}; + +static struct spi_board_info moboard_spi_board_info[] __initdata = { + { + .modalias = "mc13783", + /* irq number is run-time assigned */ + .max_speed_hz = 300000, + .bus_num = 1, + .chip_select = 0, + .platform_data = &moboard_pmic, + .mode = SPI_CS_HIGH, + }, +}; + +static const struct spi_imx_master moboard_spi2_pdata __initconst = { + .num_chipselect = 2, +}; + +#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0) +#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1) + +static int moboard_sdhc1_get_ro(struct device *dev) +{ + return !gpio_get_value(SDHC1_WP); +} + +static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC1_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC1_CD); + + ret = gpio_request(SDHC1_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC1_WP); + + ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc1-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC1_WP); +err_gpio_free: + gpio_free(SDHC1_CD); + + return ret; +} + +static void moboard_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC1_CD), data); + gpio_free(SDHC1_WP); + gpio_free(SDHC1_CD); +} + +static const struct imxmmc_platform_data sdhc1_pdata __initconst = { + .get_ro = moboard_sdhc1_get_ro, + .init = moboard_sdhc1_init, + .exit = moboard_sdhc1_exit, +}; + +/* + * this pin is dedicated for all mx31moboard systems, so we do it here + */ +#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0) +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS) + +#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) +#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6) + +static void usb_xcvr_reset(void) +{ + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU); + + mxc_iomux_set_gpr(MUX_PGP_UH2, true); + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD); + + gpio_request(OTG_EN_B, "usb-udc-en"); + gpio_direction_output(OTG_EN_B, 0); + gpio_request(USBH2_EN_B, "usbh2-en"); + gpio_direction_output(USBH2_EN_B, 0); + + gpio_request(USB_RESET_B, "usb-reset"); + gpio_direction_output(USB_RESET_B, 0); + mdelay(1); + gpio_set_value(USB_RESET_B, 1); + mdelay(1); +} + +static int moboard_usbh2_init_hw(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} + +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = moboard_usbh2_init_hw, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, +}; + +static int __init moboard_usbh2_init(void) +{ + struct platform_device *pdev; + + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (!usbh2_pdata.otg) + return -ENODEV; + + pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata); + + return PTR_ERR_OR_ZERO(pdev); +} + +static const struct gpio_led mx31moboard_leds[] __initconst = { + { + .name = "coreboard-led-0:red:running", + .default_trigger = "heartbeat", + .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0), + }, { + .name = "coreboard-led-1:red", + .gpio = IOMUX_TO_GPIO(MX31_PIN_STX0), + }, { + .name = "coreboard-led-2:red", + .gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0), + }, { + .name = "coreboard-led-3:red", + .gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0), + }, +}; + +static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = { + .num_leds = ARRAY_SIZE(mx31moboard_leds), + .leds = mx31moboard_leds, +}; + +static struct platform_device *devices[] __initdata = { + &mx31moboard_flash, +}; + +static struct mx3_camera_pdata camera_pdata __initdata = { + .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10, + .mclk_10khz = 4800, +}; + +static phys_addr_t mx3_camera_base __initdata; +#define MX3_CAMERA_BUF_SIZE SZ_4M + +static int __init mx31moboard_init_cam(void) +{ + int ret; + struct platform_device *pdev; + + imx31_add_ipu_core(); + + pdev = imx31_alloc_mx3_camera(&camera_pdata); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + ret = dma_declare_coherent_memory(&pdev->dev, + mx3_camera_base, mx3_camera_base, + MX3_CAMERA_BUF_SIZE, + DMA_MEMORY_EXCLUSIVE); + if (ret) + goto err; + + ret = platform_device_add(pdev); + if (ret) +err: + platform_device_put(pdev); + + return ret; + +} + +static void mx31moboard_poweroff(void) +{ + struct clk *clk = clk_get_sys("imx2-wdt.0", NULL); + + if (!IS_ERR(clk)) + clk_prepare_enable(clk); + + mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST); + + imx_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); +} + +static int mx31moboard_baseboard; +core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); + +/* + * Board specific initialization. + */ +static void __init mx31moboard_init(void) +{ + imx31_soc_init(); + + mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), + "moboard"); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + imx31_add_imx2_wdt(); + + imx31_add_imx_uart0(&uart0_pdata); + imx31_add_imx_uart4(&uart4_pdata); + + imx31_add_imx_i2c0(&moboard_i2c0_data); + imx31_add_imx_i2c1(&moboard_i2c1_data); + + imx31_add_spi_imx1(&moboard_spi1_pdata); + imx31_add_spi_imx2(&moboard_spi2_pdata); + + mx31moboard_init_cam(); + + imx31_add_imx_ssi(0, &moboard_ssi_pdata); + + pm_power_off = mx31moboard_poweroff; +} + +static void __init mx31moboard_late(void) +{ + gpio_led_register_device(-1, &mx31moboard_led_pdata); + + moboard_uart0_init(); + + gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq"); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); + moboard_spi_board_info[0].irq = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); + spi_register_board_info(moboard_spi_board_info, + ARRAY_SIZE(moboard_spi_board_info)); + + imx31_add_mxc_mmc(0, &sdhc1_pdata); + + usb_xcvr_reset(); + moboard_usbh2_init(); + + imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); + + switch (mx31moboard_baseboard) { + case MX31NOBOARD: + break; + case MX31DEVBOARD: + mx31moboard_devboard_init(); + break; + case MX31MARXBOT: + mx31moboard_marxbot_init(); + break; + case MX31SMARTBOT: + case MX31EYEBOT: + mx31moboard_smartbot_init(mx31moboard_baseboard); + break; + default: + printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", + mx31moboard_baseboard); + } +} + +static void __init mx31moboard_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +static void __init mx31moboard_reserve(void) +{ + /* reserve 4 MiB for mx3-camera */ + mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE, + MX3_CAMERA_BUF_SIZE); +} + +MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") + /* Maintainer: Philippe Retornaz, EPFL Mobots group */ + .atag_offset = 0x100, + .reserve = mx31moboard_reserve, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .init_time = mx31moboard_timer_init, + .init_machine = mx31moboard_init, + .init_late = mx31moboard_late, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c new file mode 100644 index 000000000..1c33a6ce3 --- /dev/null +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -0,0 +1,525 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * Copyright (C) 2011 Meprolight, Ltd. + * Alex Gershgorin <alexg@meprolight.com> + * + * Modified from i.MX31 3-Stack Development System + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * This machine is known as: + * - i.MX35 3-Stack Development System + * - i.MX35 Platform Development Kit (i.MX35 PDK) + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/memory.h> +#include <linux/gpio.h> +#include <linux/usb/otg.h> + +#include <linux/mtd/physmap.h> +#include <linux/mfd/mc13892.h> +#include <linux/regulator/machine.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include <video/platform_lcd.h> + +#include "3ds_debugboard.h" +#include "common.h" +#include "devices-imx35.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx35.h" + +#define GPIO_MC9S08DZ60_GPS_ENABLE 0 +#define GPIO_MC9S08DZ60_HDD_ENABLE 4 +#define GPIO_MC9S08DZ60_WIFI_ENABLE 5 +#define GPIO_MC9S08DZ60_LCD_ENABLE 6 +#define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8 + +static const struct fb_videomode fb_modedb[] = { + { + /* 800x480 @ 55 Hz */ + .name = "Ceramate-CLAA070VC01", + .refresh = 55, + .xres = 800, + .yres = 480, + .pixclock = 40000, + .left_margin = 40, + .right_margin = 40, + .upper_margin = 5, + .lower_margin = 5, + .hsync_len = 20, + .vsync_len = 10, + .sync = FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct mx3fb_platform_data mx3fb_pdata __initdata = { + .name = "Ceramate-CLAA070VC01", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +static struct i2c_board_info __initdata i2c_devices_3ds[] = { + { + I2C_BOARD_INFO("mc9s08dz60", 0x69), + }, +}; + +static int lcd_power_gpio = -ENXIO; + +static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, void *data) +{ + return !strcmp(chip->label, data); +} + +static void mx35_3ds_lcd_set_power( + struct plat_lcd_data *pd, unsigned int power) +{ + struct gpio_chip *chip; + + if (!gpio_is_valid(lcd_power_gpio)) { + chip = gpiochip_find( + "mc9s08dz60", mc9s08dz60_gpiochip_match); + if (chip) { + lcd_power_gpio = + chip->base + GPIO_MC9S08DZ60_LCD_ENABLE; + if (gpio_request(lcd_power_gpio, "lcd_power") < 0) { + pr_err("error: gpio already requested!\n"); + lcd_power_gpio = -ENXIO; + } + } else { + pr_err("error: didn't find mc9s08dz60 gpio chip\n"); + } + } + + if (gpio_is_valid(lcd_power_gpio)) + gpio_set_value_cansleep(lcd_power_gpio, power); +} + +static struct plat_lcd_data mx35_3ds_lcd_data = { + .set_power = mx35_3ds_lcd_set_power, +}; + +static struct platform_device mx35_3ds_lcd = { + .name = "platform-lcd", + .dev.platform_data = &mx35_3ds_lcd_data, +}; + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct physmap_flash_data mx35pdk_flash_data = { + .width = 2, +}; + +static struct resource mx35pdk_flash_resource = { + .start = MX35_CS0_BASE_ADDR, + .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mx35pdk_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &mx35pdk_flash_data, + }, + .resource = &mx35pdk_flash_resource, + .num_resources = 1, +}; + +static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + +static struct platform_device *devices[] __initdata = { + &mx35pdk_flash, +}; + +static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = { + /* UART1 */ + MX35_PAD_CTS1__UART1_CTS, + MX35_PAD_RTS1__UART1_RTS, + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RXD1__UART1_RXD_MUX, + /* FEC */ + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + /* USBOTG */ + MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, + MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, + /* USBH1 */ + MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, + MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, + /* SDCARD */ + MX35_PAD_SD1_CMD__ESDHC1_CMD, + MX35_PAD_SD1_CLK__ESDHC1_CLK, + MX35_PAD_SD1_DATA0__ESDHC1_DAT0, + MX35_PAD_SD1_DATA1__ESDHC1_DAT1, + MX35_PAD_SD1_DATA2__ESDHC1_DAT2, + MX35_PAD_SD1_DATA3__ESDHC1_DAT3, + /* I2C1 */ + MX35_PAD_I2C1_CLK__I2C1_SCL, + MX35_PAD_I2C1_DAT__I2C1_SDA, + /* Display */ + MX35_PAD_LD0__IPU_DISPB_DAT_0, + MX35_PAD_LD1__IPU_DISPB_DAT_1, + MX35_PAD_LD2__IPU_DISPB_DAT_2, + MX35_PAD_LD3__IPU_DISPB_DAT_3, + MX35_PAD_LD4__IPU_DISPB_DAT_4, + MX35_PAD_LD5__IPU_DISPB_DAT_5, + MX35_PAD_LD6__IPU_DISPB_DAT_6, + MX35_PAD_LD7__IPU_DISPB_DAT_7, + MX35_PAD_LD8__IPU_DISPB_DAT_8, + MX35_PAD_LD9__IPU_DISPB_DAT_9, + MX35_PAD_LD10__IPU_DISPB_DAT_10, + MX35_PAD_LD11__IPU_DISPB_DAT_11, + MX35_PAD_LD12__IPU_DISPB_DAT_12, + MX35_PAD_LD13__IPU_DISPB_DAT_13, + MX35_PAD_LD14__IPU_DISPB_DAT_14, + MX35_PAD_LD15__IPU_DISPB_DAT_15, + MX35_PAD_LD16__IPU_DISPB_DAT_16, + MX35_PAD_LD17__IPU_DISPB_DAT_17, + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, + MX35_PAD_CONTRAST__IPU_DISPB_CONTR, + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, + MX35_PAD_D3_REV__IPU_DISPB_D3_REV, + MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, + /*PMIC IRQ*/ + MX35_PAD_GPIO2_0__GPIO2_0, +}; + +static struct regulator_consumer_supply sw1_consumers[] = { + { + .supply = "cpu_vcc", + } +}; + +static struct regulator_consumer_supply vcam_consumers[] = { + /* sgtl5000 */ + REGULATOR_SUPPLY("VDDA", "0-000a"), +}; + +static struct regulator_init_data sw1_init = { + .constraints = { + .name = "SW1", + .min_uV = 600000, + .max_uV = 1375000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = 0, + .always_on = 1, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(sw1_consumers), + .consumer_supplies = sw1_consumers, +}; + +static struct regulator_init_data sw2_init = { + .constraints = { + .name = "SW2", + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data sw3_init = { + .constraints = { + .name = "SW3", + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data sw4_init = { + .constraints = { + .name = "SW4", + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data viohi_init = { + .constraints = { + .name = "VIOHI", + .boot_on = 1, + } +}; + +static struct regulator_init_data vusb_init = { + .constraints = { + .name = "VUSB", + .boot_on = 1, + } +}; + +static struct regulator_init_data vdig_init = { + .constraints = { + .name = "VDIG", + .boot_on = 1, + } +}; + +static struct regulator_init_data vpll_init = { + .constraints = { + .name = "VPLL", + .boot_on = 1, + } +}; + +static struct regulator_init_data vusb2_init = { + .constraints = { + .name = "VUSB2", + .boot_on = 1, + } +}; + +static struct regulator_init_data vvideo_init = { + .constraints = { + .name = "VVIDEO", + .boot_on = 1 + } +}; + +static struct regulator_init_data vcam_init = { + .constraints = { + .name = "VCAM", + .min_uV = 2500000, + .max_uV = 3000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL, + .boot_on = 1 + }, + .num_consumer_supplies = ARRAY_SIZE(vcam_consumers), + .consumer_supplies = vcam_consumers, +}; + +static struct regulator_init_data vgen1_init = { + .constraints = { + .name = "VGEN1", + } +}; + +static struct regulator_init_data vgen2_init = { + .constraints = { + .name = "VGEN2", + .boot_on = 1, + } +}; + +static struct regulator_init_data vgen3_init = { + .constraints = { + .name = "VGEN3", + } +}; + +static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = { + { .id = MC13892_SW1, .init_data = &sw1_init }, + { .id = MC13892_SW2, .init_data = &sw2_init }, + { .id = MC13892_SW3, .init_data = &sw3_init }, + { .id = MC13892_SW4, .init_data = &sw4_init }, + { .id = MC13892_VIOHI, .init_data = &viohi_init }, + { .id = MC13892_VPLL, .init_data = &vpll_init }, + { .id = MC13892_VDIG, .init_data = &vdig_init }, + { .id = MC13892_VUSB2, .init_data = &vusb2_init }, + { .id = MC13892_VVIDEO, .init_data = &vvideo_init }, + { .id = MC13892_VCAM, .init_data = &vcam_init }, + { .id = MC13892_VGEN1, .init_data = &vgen1_init }, + { .id = MC13892_VGEN2, .init_data = &vgen2_init }, + { .id = MC13892_VGEN3, .init_data = &vgen3_init }, + { .id = MC13892_VUSB, .init_data = &vusb_init }, +}; + +static struct mc13xxx_platform_data mx35_3ds_mc13892_data = { + .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN, + .regulators = { + .num_regulators = ARRAY_SIZE(mx35_3ds_regulators), + .regulators = mx35_3ds_regulators, + }, +}; + +#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0) + +static struct i2c_board_info mx35_3ds_i2c_mc13892 = { + + I2C_BOARD_INFO("mc13892", 0x08), + .platform_data = &mx35_3ds_mc13892_data, + /* irq number is run-time assigned */ +}; + +static void __init imx35_3ds_init_mc13892(void) +{ + int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq"); + + if (ret) { + pr_err("failed to get pmic irq: %d\n", ret); + return; + } + + mx35_3ds_i2c_mc13892.irq = gpio_to_irq(GPIO_PMIC_INT); + i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1); +} + +static int mx35_3ds_otg_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); +} + +/* OTG config */ +static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI_WIDE, + .workaround = FLS_USB2_WORKAROUND_ENGCM09152, +/* + * ENGCM09152 also requires a hardware change. + * Please check the MX35 Chip Errata document for details. + */ +}; + +static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = mx35_3ds_otg_init, + .portsc = MXC_EHCI_MODE_UTMI, +}; + +static int mx35_3ds_usbh_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY); +} + +/* USB HOST config */ +static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { + .init = mx35_3ds_usbh_init, + .portsc = MXC_EHCI_MODE_SERIAL, +}; + +static bool otg_mode_host __initdata; + +static int __init mx35_3ds_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = true; + else if (!strcmp(options, "device")) + otg_mode_host = false; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 1; +} +__setup("otg_mode=", mx35_3ds_otg_mode); + +static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { + .bitrate = 100000, +}; + +/* + * Board specific initialization. + */ +static void __init mx35_3ds_init(void) +{ + imx35_soc_init(); + + mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); + + imx35_add_fec(NULL); + imx35_add_imx2_wdt(); + imx35_add_mxc_rtc(); + platform_add_devices(devices, ARRAY_SIZE(devices)); + + imx35_add_imx_uart0(&uart_pdata); + + if (otg_mode_host) + imx35_add_mxc_ehci_otg(&otg_pdata); + + imx35_add_mxc_ehci_hs(&usb_host_pdata); + + if (!otg_mode_host) + imx35_add_fsl_usb2_udc(&usb_otg_pdata); + + imx35_add_mxc_nand(&mx35pdk_nand_board_info); + imx35_add_sdhci_esdhc_imx(0, NULL); + + imx35_add_imx_i2c0(&mx35_3ds_i2c0_data); + + i2c_register_board_info( + 0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds)); + + imx35_add_ipu_core(); +} + +static void __init mx35_3ds_late_init(void) +{ + struct platform_device *imx35_fb_pdev; + + if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1))) + pr_warn("Init of the debugboard failed, all " + "devices on the debugboard are unusable.\n"); + + imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata); + mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev; + platform_device_register(&mx35_3ds_lcd); + + imx35_3ds_init_mc13892(); +} + +static void __init mx35pdk_timer_init(void) +{ + mx35_clocks_init(); +} + +MACHINE_START(MX35_3DS, "Freescale MX35PDK") + /* Maintainer: Freescale Semiconductor, Inc */ + .atag_offset = 0x100, + .map_io = mx35_map_io, + .init_early = imx35_init_early, + .init_irq = mx35_init_irq, + .init_time = mx35pdk_timer_init, + .init_machine = mx35_3ds_init, + .init_late = mx35_3ds_late_init, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c new file mode 100644 index 000000000..5714e2f1b --- /dev/null +++ b/arch/arm/mach-imx/mach-pca100.c @@ -0,0 +1,430 @@ +/* + * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix + * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/property.h> +#include <linux/dma-mapping.h> +#include <linux/spi/spi.h> +#include <linux/spi/eeprom.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <asm/mach/time.h> + +#include "common.h" +#include "devices-imx27.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx27.h" +#include "ulpi.h" + +#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23) +#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24) +#define SPI1_SS0 (GPIO_PORTD + 28) +#define SPI1_SS1 (GPIO_PORTD + 27) +#define SD2_CD (GPIO_PORTC + 29) + +static const int pca100_pins[] __initconst = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* SDHC */ + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, + SD2_CD | GPIO_GPIO | GPIO_IN, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* SSI1 */ + PC20_PF_SSI1_FS, + PC21_PF_SSI1_RXD, + PC22_PF_SSI1_TXD, + PC23_PF_SSI1_CLK, + /* onboard I2C */ + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* external I2C */ + PD17_PF_I2C_DATA, + PD18_PF_I2C_CLK, + /* SPI1 */ + PD25_PF_CSPI1_RDY, + PD29_PF_CSPI1_SCLK, + PD30_PF_CSPI1_MISO, + PD31_PF_CSPI1_MOSI, + /* OTG */ + OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT, + PC7_PF_USBOTG_DATA5, + PC8_PF_USBOTG_DATA6, + PC9_PF_USBOTG_DATA0, + PC10_PF_USBOTG_DATA2, + PC11_PF_USBOTG_DATA1, + PC12_PF_USBOTG_DATA4, + PC13_PF_USBOTG_DATA3, + PE0_PF_USBOTG_NXT, + PE1_PF_USBOTG_STP, + PE2_PF_USBOTG_DIR, + PE24_PF_USBOTG_CLK, + PE25_PF_USBOTG_DATA7, + /* USBH2 */ + USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT, + PA0_PF_USBH2_CLK, + PA1_PF_USBH2_DIR, + PA2_PF_USBH2_DATA7, + PA3_PF_USBH2_NXT, + PA4_PF_USBH2_STP, + PD19_AF_USBH2_DATA4, + PD20_AF_USBH2_DATA3, + PD21_AF_USBH2_DATA6, + PD22_AF_USBH2_DATA0, + PD23_AF_USBH2_DATA2, + PD24_AF_USBH2_DATA1, + PD26_AF_USBH2_DATA5, + /* display */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA26_PF_PS, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA31_PF_OE_ACD, + /* free GPIO */ + GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */ + GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */ + GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */ +}; + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static const struct mxc_nand_platform_data +pca100_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, +}; + +static const struct imxi2c_platform_data pca100_i2c1_data __initconst = { + .bitrate = 100000, +}; + +static const struct property_entry board_eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 32), + { } +}; + +static struct i2c_board_info pca100_i2c_devices[] = { + { + I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */ + .properties = board_eeprom_properties, + }, { + I2C_BOARD_INFO("pcf8563", 0x51), + }, { + I2C_BOARD_INFO("lm75", 0x4a), + } +}; + +static struct spi_eeprom at25320 = { + .name = "at25320an", + .byte_len = 4096, + .page_size = 32, + .flags = EE_ADDR2, +}; + +static struct spi_board_info pca100_spi_board_info[] __initdata = { + { + .modalias = "at25", + .max_speed_hz = 30000, + .bus_num = 0, + .chip_select = 1, + .platform_data = &at25320, + }, +}; + +static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1}; + +static const struct spi_imx_master pca100_spi0_data __initconst = { + .chipselect = pca100_spi_cs, + .num_chipselect = ARRAY_SIZE(pca100_spi_cs), +}; + +static void pca100_ac97_warm_reset(struct snd_ac97 *ac97) +{ + mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); + gpio_set_value(GPIO_PORTC + 20, 1); + udelay(2); + gpio_set_value(GPIO_PORTC + 20, 0); + mxc_gpio_mode(PC20_PF_SSI1_FS); + msleep(2); +} + +static void pca100_ac97_cold_reset(struct snd_ac97 *ac97) +{ + mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */ + gpio_set_value(GPIO_PORTC + 20, 0); + mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT); /* TX */ + gpio_set_value(GPIO_PORTC + 22, 0); + mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT); /* reset */ + gpio_set_value(GPIO_PORTC + 28, 0); + udelay(10); + gpio_set_value(GPIO_PORTC + 28, 1); + mxc_gpio_mode(PC20_PF_SSI1_FS); + mxc_gpio_mode(PC22_PF_SSI1_TXD); + msleep(2); +} + +static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = { + .ac97_reset = pca100_ac97_cold_reset, + .ac97_warm_reset = pca100_ac97_warm_reset, + .flags = IMX_SSI_USE_AC97, +}; + +static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq, + IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); + if (ret) + printk(KERN_ERR + "pca100: Failed to request irq for sd/mmc detection\n"); + + return ret; +} + +static void pca100_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); +} + +static const struct imxmmc_platform_data sdhc_pdata __initconst = { + .init = pca100_sdhc2_init, + .exit = pca100_sdhc2_exit, +}; + +static int otg_phy_init(struct platform_device *pdev) +{ + gpio_set_value(OTG_PHY_CS_GPIO, 0); + + mdelay(10); + + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + +static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = otg_phy_init, + .portsc = MXC_EHCI_MODE_ULPI, +}; + +static int usbh2_phy_init(struct platform_device *pdev) +{ + gpio_set_value(USBH2_PHY_CS_GPIO, 0); + + mdelay(10); + + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = usbh2_phy_init, + .portsc = MXC_EHCI_MODE_ULPI, +}; + +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +static bool otg_mode_host __initdata; + +static int __init pca100_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = true; + else if (!strcmp(options, "device")) + otg_mode_host = false; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 1; +} +__setup("otg_mode=", pca100_otg_mode); + +/* framebuffer info */ +static struct imx_fb_videomode pca100_fb_modes[] = { + { + .mode = { + .name = "EMERGING-ETV570G0DHU", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39722, /* in ps (25.175 MHz) */ + .hsync_len = 30, + .left_margin = 114, + .right_margin = 16, + .vsync_len = 3, + .upper_margin = 32, + .lower_margin = 0, + }, + /* + * TFT + * Pixel pol active high + * HSYNC active low + * VSYNC active low + * use HSYNC for ACD count + * line clock disable while idle + * always enable line clock even if no data + */ + .pcr = 0xf0c08080, + .bpp = 16, + }, +}; + +static const struct imx_fb_platform_data pca100_fb_data __initconst = { + .mode = pca100_fb_modes, + .num_modes = ARRAY_SIZE(pca100_fb_modes), + + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, +}; + +static void __init pca100_init(void) +{ + int ret; + + imx27_soc_init(); + + ret = mxc_gpio_setup_multiple_pins(pca100_pins, + ARRAY_SIZE(pca100_pins), "PCA100"); + if (ret) + printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); + + imx27_add_imx_uart0(&uart_pdata); + + imx27_add_mxc_nand(&pca100_nand_board_info); + + /* only the i2c master 1 is used on this CPU card */ + i2c_register_board_info(1, pca100_i2c_devices, + ARRAY_SIZE(pca100_i2c_devices)); + + imx27_add_imx_i2c(1, &pca100_i2c1_data); + + mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN); + mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN); + spi_register_board_info(pca100_spi_board_info, + ARRAY_SIZE(pca100_spi_board_info)); + imx27_add_spi_imx0(&pca100_spi0_data); + + imx27_add_imx_fb(&pca100_fb_data); + + imx27_add_fec(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); +} + +static void __init pca100_late_init(void) +{ + imx27_add_imx_ssi(0, &pca100_ssi_pdata); + + imx27_add_mxc_mmc(1, &sdhc_pdata); + + gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs"); + gpio_direction_output(OTG_PHY_CS_GPIO, 1); + gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs"); + gpio_direction_output(USBH2_PHY_CS_GPIO, 1); + + if (otg_mode_host) { + otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + + if (otg_pdata.otg) + imx27_add_mxc_ehci_otg(&otg_pdata); + } else { + gpio_set_value(OTG_PHY_CS_GPIO, 0); + imx27_add_fsl_usb2_udc(&otg_device_pdata); + } + + usbh2_pdata.otg = imx_otg_ulpi_create( + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + + if (usbh2_pdata.otg) + imx27_add_mxc_ehci_hs(2, &usbh2_pdata); +} + +static void __init pca100_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +MACHINE_START(PCA100, "phyCARD-i.MX27") + .atag_offset = 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .init_machine = pca100_init, + .init_late = pca100_late_init, + .init_time = pca100_timer_init, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c new file mode 100644 index 000000000..004737c40 --- /dev/null +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -0,0 +1,594 @@ +/* + * Copyright (C) 2008 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/plat-ram.h> +#include <linux/memory.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/property.h> +#include <linux/delay.h> +#include <linux/spi/spi.h> +#include <linux/irq.h> +#include <linux/can/platform/sja1000.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/gfp.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "devices-imx31.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "pcm037.h" +#include "ulpi.h" + +static enum pcm037_board_variant pcm037_instance = PCM037_PCM970; + +static int __init pcm037_variant_setup(char *str) +{ + if (!strcmp("eet", str)) + pcm037_instance = PCM037_EET; + else if (strcmp("pcm970", str)) + pr_warn("Unknown pcm037 baseboard variant %s\n", str); + + return 1; +} + +/* Supported values: "pcm970" (default) and "eet" */ +__setup("pcm037_variant=", pcm037_variant_setup); + +enum pcm037_board_variant pcm037_variant(void) +{ + return pcm037_instance; +} + +/* UART1 with RTS/CTS handshake signals */ +static unsigned int pcm037_uart1_handshake_pins[] = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, +}; + +/* UART1 without RTS/CTS handshake signals */ +static unsigned int pcm037_uart1_pins[] = { + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, +}; + +static unsigned int pcm037_pins[] = { + /* I2C */ + MX31_PIN_CSPI2_MOSI__SCL, + MX31_PIN_CSPI2_MISO__SDA, + MX31_PIN_CSPI2_SS2__I2C3_SDA, + MX31_PIN_CSPI2_SCLK__I2C3_SCL, + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */ + IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */ + /* SPI1 */ + MX31_PIN_CSPI1_MOSI__MOSI, + MX31_PIN_CSPI1_MISO__MISO, + MX31_PIN_CSPI1_SCLK__SCLK, + MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI1_SS0__SS0, + MX31_PIN_CSPI1_SS1__SS1, + MX31_PIN_CSPI1_SS2__SS2, + /* UART2 */ + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + /* UART3 */ + MX31_PIN_CSPI3_MOSI__RXD3, + MX31_PIN_CSPI3_MISO__TXD3, + MX31_PIN_CSPI3_SCLK__RTS3, + MX31_PIN_CSPI3_SPI_RDY__CTS3, + /* LAN9217 irq pin */ + IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), + /* Onewire */ + MX31_PIN_BATT_LINE__OWIRE, + /* Framebuffer */ + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_DRDY0__DRDY0, + MX31_PIN_D3_REV__D3_REV, + MX31_PIN_CONTRAST__CONTRAST, + MX31_PIN_D3_SPL__D3_SPL, + MX31_PIN_D3_CLS__D3_CLS, + MX31_PIN_LCS0__GPIO3_23, + /* GPIO */ + IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO), + /* OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, + MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, + MX31_PIN_USBOTG_STP__USBOTG_STP, + /* USB host 2 */ + IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC), +}; + +static struct physmap_flash_data pcm037_flash_data = { + .width = 2, +}; + +static struct resource pcm037_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pcm037_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &pcm037_flash_data, + }, + .resource = &pcm037_flash_resource, + .num_resources = 1, +}; + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct resource smsc911x_resources[] = { + { + .start = MX31_CS1_BASE_ADDR + 0x300, + .end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, { + /* irq number is run-time assigned */ + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config smsc911x_info = { + .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY | + SMSC911X_SAVE_MAC_ADDRESS, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device pcm037_eth = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_info, + }, +}; + +static struct platdata_mtd_ram pcm038_sram_data = { + .bankwidth = 2, +}; + +static struct resource pcm038_sram_resource = { + .start = MX31_CS4_BASE_ADDR, + .end = MX31_CS4_BASE_ADDR + 512 * 1024 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pcm037_sram_device = { + .name = "mtd-ram", + .id = 0, + .dev = { + .platform_data = &pcm038_sram_data, + }, + .num_resources = 1, + .resource = &pcm038_sram_resource, +}; + +static const struct mxc_nand_platform_data +pcm037_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, +}; + +static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = { + .bitrate = 100000, +}; + +static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = { + .bitrate = 20000, +}; + +static const struct property_entry board_eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 32), + { } +}; + +static struct i2c_board_info pcm037_i2c_devices[] = { + { + I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */ + .properties = board_eeprom_properties, + }, { + I2C_BOARD_INFO("pcf8563", 0x51), + } +}; + +/* Not connected by default */ +#ifdef PCM970_SDHC_RW_SWITCH +static int pcm970_sdhc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6)); +} +#endif + +#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6) +#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6) + +static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC1_GPIO_DET); + +#ifdef PCM970_SDHC_RW_SWITCH + ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC1_GPIO_WP); +#endif + + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq, + IRQF_TRIGGER_FALLING, "sdhc-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: +#ifdef PCM970_SDHC_RW_SWITCH + gpio_free(SDHC1_GPIO_WP); +err_gpio_free: +#endif + gpio_free(SDHC1_GPIO_DET); + + return ret; +} + +static void pcm970_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), data); + gpio_free(SDHC1_GPIO_DET); + gpio_free(SDHC1_GPIO_WP); +} + +static const struct imxmmc_platform_data sdhc_pdata __initconst = { +#ifdef PCM970_SDHC_RW_SWITCH + .get_ro = pcm970_sdhc1_get_ro, +#endif + .init = pcm970_sdhc1_init, + .exit = pcm970_sdhc1_exit, +}; + +static struct platform_device *devices[] __initdata = { + &pcm037_flash, + &pcm037_sram_device, +}; + +static const struct fb_videomode fb_modedb[] = { + { + /* 240x320 @ 60 Hz Sharp */ + .name = "Sharp-LQ035Q7DH06-QVGA", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | + FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "TX090", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 38255, + .left_margin = 144, + .right_margin = 0, + .upper_margin = 7, + .lower_margin = 40, + .hsync_len = 96, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "CMEL-OLED", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .name = "Sharp-LQ035Q7DH06-QVGA", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +static struct resource pcm970_sja1000_resources[] = { + { + .start = MX31_CS5_BASE_ADDR, + .end = MX31_CS5_BASE_ADDR + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, { + /* irq number is run-time assigned */ + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, +}; + +struct sja1000_platform_data pcm970_sja1000_platform_data = { + .osc_freq = 16000000, + .ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL, + .cdr = CDR_CBP, +}; + +static struct platform_device pcm970_sja1000 = { + .name = "sja1000_platform", + .dev = { + .platform_data = &pcm970_sja1000_platform_data, + }, + .resource = pcm970_sja1000_resources, + .num_resources = ARRAY_SIZE(pcm970_sja1000_resources), +}; + +static int pcm037_otg_init(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + +static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = pcm037_otg_init, + .portsc = MXC_EHCI_MODE_ULPI, +}; + +static int pcm037_usbh2_init(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = pcm037_usbh2_init, + .portsc = MXC_EHCI_MODE_ULPI, +}; + +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +static bool otg_mode_host __initdata; + +static int __init pcm037_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = true; + else if (!strcmp(options, "device")) + otg_mode_host = false; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 1; +} +__setup("otg_mode=", pcm037_otg_mode); + +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + +/* + * Board specific initialization. + */ +static void __init pcm037_init(void) +{ + imx31_soc_init(); + + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + + mxc_iomux_set_gpr(MUX_PGP_UH2, 1); + + mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), + "pcm037"); + +#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \ + | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */ + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */ + mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */ + mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */ + mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */ + mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */ + mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */ + mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */ + + if (pcm037_variant() == PCM037_EET) + mxc_iomux_setup_multiple_pins(pcm037_uart1_pins, + ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1"); + else + mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins, + ARRAY_SIZE(pcm037_uart1_handshake_pins), + "pcm037_uart1"); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + imx31_add_imx2_wdt(); + imx31_add_imx_uart0(&uart_pdata); + /* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */ + imx31_add_imx_uart1(&uart_pdata); + imx31_add_imx_uart2(&uart_pdata); + + imx31_add_mxc_w1(); + + /* I2C adapters and devices */ + i2c_register_board_info(1, pcm037_i2c_devices, + ARRAY_SIZE(pcm037_i2c_devices)); + + imx31_add_imx_i2c1(&pcm037_i2c1_data); + imx31_add_imx_i2c2(&pcm037_i2c2_data); + + imx31_add_mxc_nand(&pcm037_nand_board_info); + imx31_add_ipu_core(); + imx31_add_mx3_sdc_fb(&mx3fb_pdata); + + if (otg_mode_host) { + otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (otg_pdata.otg) + imx31_add_mxc_ehci_otg(&otg_pdata); + } + + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbh2_pdata.otg) + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); + + if (!otg_mode_host) + imx31_add_fsl_usb2_udc(&otg_device_pdata); +} + +static void __init pcm037_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +static void __init pcm037_init_late(void) +{ + int ret; + + /* LAN9217 IRQ pin */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); + if (!ret) { + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + smsc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + smsc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + platform_device_register(&pcm037_eth); + } else { + pr_warn("could not get LAN irq gpio\n"); + } + + imx31_add_mxc_mmc(0, &sdhc_pdata); + + pcm970_sja1000_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); + pcm970_sja1000_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); + platform_device_register(&pcm970_sja1000); + + pcm037_eet_init_devices(); +} + +MACHINE_START(PCM037, "Phytec Phycore pcm037") + /* Maintainer: Pengutronix */ + .atag_offset = 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .init_time = pcm037_timer_init, + .init_machine = pcm037_init, + .init_late = pcm037_init_late, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c new file mode 100644 index 000000000..15bc956d4 --- /dev/null +++ b/arch/arm/mach-imx/mach-pcm037_eet.c @@ -0,0 +1,174 @@ +/* + * Copyright (C) 2009 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +#include <asm/mach-types.h> + +#include "pcm037.h" +#include "common.h" +#include "devices-imx31.h" +#include "iomux-mx3.h" + +static unsigned int pcm037_eet_pins[] = { + /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */ + IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO), + /* GPIO keys */ + IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */ + IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */ + IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */ + IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */ + IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */ + IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */ + IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */ + IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */ + IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */ + IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */ + IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */ + IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */ + IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */ + IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */ + + /* LEDs */ + IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */ + IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */ + IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */ + IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */ +}; + +/* SPI */ +static struct spi_board_info pcm037_spi_dev[] = { + { + .modalias = "dac124s085", + .max_speed_hz = 400000, + .bus_num = 0, + .chip_select = 1, /* Index in pcm037_spi1_cs[] */ + .mode = SPI_CPHA, + }, +}; + +/* Platform Data for MXC CSPI */ +static const struct spi_imx_master pcm037_spi1_pdata __initconst = { + .num_chipselect = 2, +}; + +/* GPIO-keys input device */ +static struct gpio_keys_button pcm037_gpio_keys[] = { + { + .type = EV_KEY, + .code = KEY_L, + .gpio = 0, + .desc = "Wheel Manual", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_A, + .gpio = 1, + .desc = "Wheel AF", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_V, + .gpio = 2, + .desc = "Wheel View", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_M, + .gpio = 3, + .desc = "Wheel Menu", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_UP, + .gpio = 32, + .desc = "Nav Pad Up", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_RIGHT, + .gpio = 33, + .desc = "Nav Pad Right", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_DOWN, + .gpio = 34, + .desc = "Nav Pad Down", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_LEFT, + .gpio = 35, + .desc = "Nav Pad Left", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_ENTER, + .gpio = 38, + .desc = "Nav Pad Ok", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_O, + .gpio = 39, + .desc = "Wheel Off", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_FORWARD, + .gpio = 50, + .desc = "Focus Forward", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_BACK, + .gpio = 51, + .desc = "Focus Backward", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_MIDDLE, + .gpio = 52, + .desc = "Release Half", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_EXTRA, + .gpio = 53, + .desc = "Release Full", + .wakeup = 0, + }, +}; + +static const struct gpio_keys_platform_data + pcm037_gpio_keys_platform_data __initconst = { + .buttons = pcm037_gpio_keys, + .nbuttons = ARRAY_SIZE(pcm037_gpio_keys), + .rep = 0, /* No auto-repeat */ +}; + +int __init pcm037_eet_init_devices(void) +{ + if (pcm037_variant() != PCM037_EET) + return 0; + + mxc_iomux_setup_multiple_pins(pcm037_eet_pins, + ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet"); + + /* SPI */ + spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); + imx31_add_spi_imx0(&pcm037_spi1_pdata); + + imx_add_gpio_keys(&pcm037_gpio_keys_platform_data); + + return 0; +} diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c new file mode 100644 index 000000000..e595e5368 --- /dev/null +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -0,0 +1,412 @@ +/* + * Copyright (C) 2009 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> + +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/plat-ram.h> +#include <linux/memory.h> +#include <linux/gpio.h> +#include <linux/smc911x.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/property.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "devices-imx35.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx35.h" +#include "ulpi.h" + +static const struct fb_videomode fb_modedb[] = { + { + /* 240x320 @ 60 Hz */ + .name = "Sharp-LQ035Q7", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "TX090", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 38255, + .left_margin = 144, + .right_margin = 0, + .upper_margin = 7, + .lower_margin = 40, + .hsync_len = 96, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct mx3fb_platform_data mx3fb_pdata __initdata = { + .name = "Sharp-LQ035Q7", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +static struct physmap_flash_data pcm043_flash_data = { + .width = 2, +}; + +static struct resource pcm043_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pcm043_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &pcm043_flash_data, + }, + .resource = &pcm043_flash_resource, + .num_resources = 1, +}; + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = { + .bitrate = 50000, +}; + +static const struct property_entry board_eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 32), + { } +}; + +static struct i2c_board_info pcm043_i2c_devices[] = { + { + I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */ + .properties = board_eeprom_properties, + }, { + I2C_BOARD_INFO("pcf8563", 0x51), + }, +}; + +static struct platform_device *devices[] __initdata = { + &pcm043_flash, +}; + +static const iomux_v3_cfg_t pcm043_pads[] __initconst = { + /* UART1 */ + MX35_PAD_CTS1__UART1_CTS, + MX35_PAD_RTS1__UART1_RTS, + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RXD1__UART1_RXD_MUX, + /* UART2 */ + MX35_PAD_CTS2__UART2_CTS, + MX35_PAD_RTS2__UART2_RTS, + MX35_PAD_TXD2__UART2_TXD_MUX, + MX35_PAD_RXD2__UART2_RXD_MUX, + /* FEC */ + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + /* I2C1 */ + MX35_PAD_I2C1_CLK__I2C1_SCL, + MX35_PAD_I2C1_DAT__I2C1_SDA, + /* Display */ + MX35_PAD_LD0__IPU_DISPB_DAT_0, + MX35_PAD_LD1__IPU_DISPB_DAT_1, + MX35_PAD_LD2__IPU_DISPB_DAT_2, + MX35_PAD_LD3__IPU_DISPB_DAT_3, + MX35_PAD_LD4__IPU_DISPB_DAT_4, + MX35_PAD_LD5__IPU_DISPB_DAT_5, + MX35_PAD_LD6__IPU_DISPB_DAT_6, + MX35_PAD_LD7__IPU_DISPB_DAT_7, + MX35_PAD_LD8__IPU_DISPB_DAT_8, + MX35_PAD_LD9__IPU_DISPB_DAT_9, + MX35_PAD_LD10__IPU_DISPB_DAT_10, + MX35_PAD_LD11__IPU_DISPB_DAT_11, + MX35_PAD_LD12__IPU_DISPB_DAT_12, + MX35_PAD_LD13__IPU_DISPB_DAT_13, + MX35_PAD_LD14__IPU_DISPB_DAT_14, + MX35_PAD_LD15__IPU_DISPB_DAT_15, + MX35_PAD_LD16__IPU_DISPB_DAT_16, + MX35_PAD_LD17__IPU_DISPB_DAT_17, + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, + MX35_PAD_CONTRAST__IPU_DISPB_CONTR, + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, + MX35_PAD_D3_REV__IPU_DISPB_D3_REV, + MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, + /* gpio */ + MX35_PAD_ATA_CS0__GPIO2_6, + /* USB host */ + MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, + MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, + /* SSI */ + MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS, + MX35_PAD_STXD4__AUDMUX_AUD4_TXD, + MX35_PAD_SRXD4__AUDMUX_AUD4_RXD, + MX35_PAD_SCK4__AUDMUX_AUD4_TXC, + /* CAN2 */ + MX35_PAD_TX5_RX0__CAN2_TXCAN, + MX35_PAD_TX4_RX1__CAN2_RXCAN, + /* esdhc */ + MX35_PAD_SD1_CMD__ESDHC1_CMD, + MX35_PAD_SD1_CLK__ESDHC1_CLK, + MX35_PAD_SD1_DATA0__ESDHC1_DAT0, + MX35_PAD_SD1_DATA1__ESDHC1_DAT1, + MX35_PAD_SD1_DATA2__ESDHC1_DAT2, + MX35_PAD_SD1_DATA3__ESDHC1_DAT3, + MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */ + MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */ +}; + +#define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31) +#define AC97_GPIO_TXD IMX_GPIO_NR(2, 28) +#define AC97_GPIO_RESET IMX_GPIO_NR(2, 0) +#define SD1_GPIO_WP IMX_GPIO_NR(2, 23) +#define SD1_GPIO_CD IMX_GPIO_NR(2, 24) + +static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) +{ + iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; + iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; + int ret; + + ret = gpio_request(AC97_GPIO_TXFS, "SSI"); + if (ret) { + printk("failed to get GPIO_TXFS: %d\n", ret); + return; + } + + mxc_iomux_v3_setup_pad(txfs_gpio); + + /* warm reset */ + gpio_direction_output(AC97_GPIO_TXFS, 1); + udelay(2); + gpio_set_value(AC97_GPIO_TXFS, 0); + + gpio_free(AC97_GPIO_TXFS); + mxc_iomux_v3_setup_pad(txfs); +} + +static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97) +{ + iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; + iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; + iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28; + iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD; + iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0; + int ret; + + ret = gpio_request(AC97_GPIO_TXFS, "SSI"); + if (ret) + goto err1; + + ret = gpio_request(AC97_GPIO_TXD, "SSI"); + if (ret) + goto err2; + + ret = gpio_request(AC97_GPIO_RESET, "SSI"); + if (ret) + goto err3; + + mxc_iomux_v3_setup_pad(txfs_gpio); + mxc_iomux_v3_setup_pad(txd_gpio); + mxc_iomux_v3_setup_pad(reset_gpio); + + gpio_direction_output(AC97_GPIO_TXFS, 0); + gpio_direction_output(AC97_GPIO_TXD, 0); + + /* cold reset */ + gpio_direction_output(AC97_GPIO_RESET, 0); + udelay(10); + gpio_direction_output(AC97_GPIO_RESET, 1); + + mxc_iomux_v3_setup_pad(txd); + mxc_iomux_v3_setup_pad(txfs); + + gpio_free(AC97_GPIO_RESET); +err3: + gpio_free(AC97_GPIO_TXD); +err2: + gpio_free(AC97_GPIO_TXFS); +err1: + if (ret) + printk("%s failed with %d\n", __func__, ret); + mdelay(1); +} + +static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = { + .ac97_reset = pcm043_ac97_cold_reset, + .ac97_warm_reset = pcm043_ac97_warm_reset, + .flags = IMX_SSI_USE_AC97, +}; + +static const struct mxc_nand_platform_data +pcm037_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, +}; + +static int pcm043_otg_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + +static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = pcm043_otg_init, + .portsc = MXC_EHCI_MODE_UTMI, +}; + +static int pcm043_usbh1_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN); +} + +static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { + .init = pcm043_usbh1_init, + .portsc = MXC_EHCI_MODE_SERIAL, +}; + +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI, +}; + +static bool otg_mode_host __initdata; + +static int __init pcm043_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = true; + else if (!strcmp(options, "device")) + otg_mode_host = false; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 1; +} +__setup("otg_mode=", pcm043_otg_mode); + +static struct esdhc_platform_data sd1_pdata = { + .wp_gpio = SD1_GPIO_WP, + .cd_gpio = SD1_GPIO_CD, + .wp_type = ESDHC_WP_GPIO, + .cd_type = ESDHC_CD_GPIO, +}; + +/* + * Board specific initialization. + */ +static void __init pcm043_init(void) +{ + imx35_soc_init(); + + mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); + + imx35_add_fec(NULL); + platform_add_devices(devices, ARRAY_SIZE(devices)); + imx35_add_imx2_wdt(); + + imx35_add_imx_uart0(&uart_pdata); + imx35_add_mxc_nand(&pcm037_nand_board_info); + + imx35_add_imx_uart1(&uart_pdata); + + i2c_register_board_info(0, pcm043_i2c_devices, + ARRAY_SIZE(pcm043_i2c_devices)); + + imx35_add_imx_i2c0(&pcm043_i2c0_data); + + imx35_add_ipu_core(); + imx35_add_mx3_sdc_fb(&mx3fb_pdata); + + if (otg_mode_host) { + otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (otg_pdata.otg) + imx35_add_mxc_ehci_otg(&otg_pdata); + } + imx35_add_mxc_ehci_hs(&usbh1_pdata); + + if (!otg_mode_host) + imx35_add_fsl_usb2_udc(&otg_device_pdata); + + imx35_add_flexcan1(); +} + +static void __init pcm043_late_init(void) +{ + imx35_add_imx_ssi(0, &pcm043_ssi_pdata); + + imx35_add_sdhci_esdhc_imx(0, &sd1_pdata); +} + +static void __init pcm043_timer_init(void) +{ + mx35_clocks_init(); +} + +MACHINE_START(PCM043, "Phytec Phycore pcm043") + /* Maintainer: Pengutronix */ + .atag_offset = 0x100, + .map_io = mx35_map_io, + .init_early = imx35_init_early, + .init_irq = mx35_init_irq, + .init_time = pcm043_timer_init, + .init_machine = pcm043_init, + .init_late = pcm043_late_init, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c new file mode 100644 index 000000000..42a700053 --- /dev/null +++ b/arch/arm/mach-imx/mach-qong.c @@ -0,0 +1,272 @@ +/* + * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/memory.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/rawnand.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <asm/page.h> +#include <asm/setup.h> + +#include "common.h" +#include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" + +/* FPGA defines */ +#define QONG_FPGA_VERSION(major, minor, rev) \ + (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF)) + +#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR +#define QONG_FPGA_PERIPH_SIZE (1 << 24) + +#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR +#define QONG_FPGA_CTRL_SIZE 0x10 +/* FPGA control registers */ +#define QONG_FPGA_CTRL_VERSION 0x00 + +#define QONG_DNET_ID 1 +#define QONG_DNET_BASEADDR \ + (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE) +#define QONG_DNET_SIZE 0x00001000 + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static int uart_pins[] = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1 +}; + +static inline void __init mxc_init_imx_uart(void) +{ + mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), + "uart-0"); + imx31_add_imx_uart0(&uart_pdata); +} + +static struct resource dnet_resources[] = { + { + .name = "dnet-memory", + .start = QONG_DNET_BASEADDR, + .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + /* irq number is run-time assigned */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dnet_device = { + .name = "dnet", + .id = -1, + .num_resources = ARRAY_SIZE(dnet_resources), + .resource = dnet_resources, +}; + +static int __init qong_init_dnet(void) +{ + int ret; + + dnet_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)); + dnet_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)); + ret = platform_device_register(&dnet_device); + return ret; +} + +/* MTD NOR flash */ + +static struct physmap_flash_data qong_flash_data = { + .width = 2, +}; + +static struct resource qong_flash_resource = { + .start = MX31_CS0_BASE_ADDR, + .end = MX31_CS0_BASE_ADDR + SZ_128M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device qong_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &qong_flash_data, + }, + .resource = &qong_flash_resource, + .num_resources = 1, +}; + +static void qong_init_nor_mtd(void) +{ + (void)platform_device_register(&qong_nor_mtd_device); +} + +/* + * Hardware specific access to control-lines + */ +static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *nand_chip = mtd_to_nand(mtd); + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24)); + else + writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23)); +} + +/* + * Read the Device Ready pin. + */ +static int qong_nand_device_ready(struct mtd_info *mtd) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB)); +} + +static void qong_nand_select_chip(struct mtd_info *mtd, int chip) +{ + if (chip >= 0) + gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0); + else + gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1); +} + +static struct platform_nand_data qong_nand_data = { + .chip = { + .nr_chips = 1, + .chip_delay = 20, + .options = 0, + }, + .ctrl = { + .cmd_ctrl = qong_nand_cmd_ctrl, + .dev_ready = qong_nand_device_ready, + .select_chip = qong_nand_select_chip, + } +}; + +static struct resource qong_nand_resource = { + .start = MX31_CS3_BASE_ADDR, + .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device qong_nand_device = { + .name = "gen_nand", + .id = -1, + .dev = { + .platform_data = &qong_nand_data, + }, + .num_resources = 1, + .resource = &qong_nand_resource, +}; + +static void __init qong_init_nand_mtd(void) +{ + /* init CS */ + imx_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3))); + imx_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3))); + imx_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3))); + + mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); + + /* enable pin */ + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO)); + if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable")) + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0); + + /* ready/busy pin */ + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO)); + if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy")) + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB)); + + /* write protect pin */ + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO)); + if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp")) + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B)); + + platform_device_register(&qong_nand_device); +} + +static void __init qong_init_fpga(void) +{ + void __iomem *regs; + u32 fpga_ver; + + regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE); + if (!regs) { + printk(KERN_ERR "%s: failed to map registers, aborting.\n", + __func__); + return; + } + + fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION); + iounmap(regs); + printk(KERN_INFO "Qong FPGA version %d.%d.%d\n", + (fpga_ver & 0xF000) >> 12, + (fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF); + if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) { + printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based " + "devices won't be registered!\n"); + return; + } + + /* register FPGA-based devices */ + qong_init_nand_mtd(); + qong_init_dnet(); +} + +/* + * Board specific initialization. + */ +static void __init qong_init(void) +{ + imx31_soc_init(); + + mxc_init_imx_uart(); + qong_init_nor_mtd(); + imx31_add_imx2_wdt(); +} + +static void __init qong_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") + /* Maintainer: DENX Software Engineering GmbH */ + .atag_offset = 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .init_time = qong_timer_init, + .init_machine = qong_init, + .init_late = qong_init_fpga, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c new file mode 100644 index 000000000..b20f6c14e --- /dev/null +++ b/arch/arm/mach-imx/mach-vf610.c @@ -0,0 +1,28 @@ +/* + * Copyright 2012-2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/of_platform.h> +#include <linux/irqchip.h> +#include <asm/mach/arch.h> +#include <asm/hardware/cache-l2x0.h> + +static const char * const vf610_dt_compat[] __initconst = { + "fsl,vf500", + "fsl,vf510", + "fsl,vf600", + "fsl,vf610", + "fsl,vf610m4", + NULL, +}; + +DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF5xx/VF6xx (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .dt_compat = vf610_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c new file mode 100644 index 000000000..da3336aaa --- /dev/null +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -0,0 +1,315 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix + * Copyright 2010 Creative Product Design + * + * Derived from mx35 3stack. + * Original author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/memory.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <linux/i2c.h> +#include <linux/mfd/mc13xxx.h> + +#include "common.h" +#include "devices-imx35.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx35.h" + +#define GPIO_LCDPWR IMX_GPIO_NR(1, 2) +#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0) + +#define GPIO_BUTTON1 IMX_GPIO_NR(1, 4) +#define GPIO_BUTTON2 IMX_GPIO_NR(1, 5) +#define GPIO_BUTTON3 IMX_GPIO_NR(1, 7) +#define GPIO_BUTTON4 IMX_GPIO_NR(1, 8) +#define GPIO_BUTTON5 IMX_GPIO_NR(1, 9) +#define GPIO_BUTTON6 IMX_GPIO_NR(1, 10) +#define GPIO_BUTTON7 IMX_GPIO_NR(1, 11) +#define GPIO_BUTTON8 IMX_GPIO_NR(1, 12) + +static const struct fb_videomode fb_modedb[] = { + { + /* 800x480 @ 60 Hz */ + .name = "PT0708048", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = KHZ2PICOS(33260), + .left_margin = 50, + .right_margin = 156, + .upper_margin = 10, + .lower_margin = 10, + .hsync_len = 1, /* note: DE only display */ + .vsync_len = 1, /* note: DE only display */ + .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 800x480 @ 60 Hz */ + .name = "CTP-CLAA070LC0ACW", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = KHZ2PICOS(27000), + .left_margin = 50, + .right_margin = 50, /* whole line should have 900 clocks */ + .upper_margin = 10, + .lower_margin = 10, /* whole frame should have 500 lines */ + .hsync_len = 1, /* note: DE only display */ + .vsync_len = 1, /* note: DE only display */ + .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + } +}; + +static struct mx3fb_platform_data mx3fb_pdata __initdata = { + .name = "PT0708048", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +static struct physmap_flash_data vpr200_flash_data = { + .width = 2, +}; + +static struct resource vpr200_flash_resource = { + .start = MX35_CS0_BASE_ADDR, + .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vpr200_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &vpr200_flash_data, + }, + .resource = &vpr200_flash_resource, + .num_resources = 1, +}; + +static const struct mxc_nand_platform_data + vpr200_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + +#define VPR_KEY_DEBOUNCE 500 +static struct gpio_keys_button vpr200_gpio_keys_table[] = { + {KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE}, + {KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE}, + {KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE}, + {KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE}, + {KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE}, + {KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE}, + {KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE}, + {KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE}, +}; + +static const struct gpio_keys_platform_data + vpr200_gpio_keys_data __initconst = { + .buttons = vpr200_gpio_keys_table, + .nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table), +}; + +static struct mc13xxx_platform_data vpr200_pmic = { + .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN, +}; + +static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = { + .bitrate = 50000, +}; + +static struct i2c_board_info vpr200_i2c_devices[] = { + { + I2C_BOARD_INFO("24c02", 0x50), /* E0=0, E1=0, E2=0 */ + }, { + I2C_BOARD_INFO("mc13892", 0x08), + .platform_data = &vpr200_pmic, + /* irq number is run-time assigned */ + } +}; + +static const iomux_v3_cfg_t vpr200_pads[] __initconst = { + /* UART1 */ + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RXD1__UART1_RXD_MUX, + /* UART3 */ + MX35_PAD_ATA_DATA10__UART3_RXD_MUX, + MX35_PAD_ATA_DATA11__UART3_TXD_MUX, + /* FEC */ + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + /* Display */ + MX35_PAD_LD0__IPU_DISPB_DAT_0, + MX35_PAD_LD1__IPU_DISPB_DAT_1, + MX35_PAD_LD2__IPU_DISPB_DAT_2, + MX35_PAD_LD3__IPU_DISPB_DAT_3, + MX35_PAD_LD4__IPU_DISPB_DAT_4, + MX35_PAD_LD5__IPU_DISPB_DAT_5, + MX35_PAD_LD6__IPU_DISPB_DAT_6, + MX35_PAD_LD7__IPU_DISPB_DAT_7, + MX35_PAD_LD8__IPU_DISPB_DAT_8, + MX35_PAD_LD9__IPU_DISPB_DAT_9, + MX35_PAD_LD10__IPU_DISPB_DAT_10, + MX35_PAD_LD11__IPU_DISPB_DAT_11, + MX35_PAD_LD12__IPU_DISPB_DAT_12, + MX35_PAD_LD13__IPU_DISPB_DAT_13, + MX35_PAD_LD14__IPU_DISPB_DAT_14, + MX35_PAD_LD15__IPU_DISPB_DAT_15, + MX35_PAD_LD16__IPU_DISPB_DAT_16, + MX35_PAD_LD17__IPU_DISPB_DAT_17, + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, + MX35_PAD_CONTRAST__IPU_DISPB_CONTR, + /* LCD Enable */ + MX35_PAD_D3_VSYNC__GPIO1_2, + /* USBOTG */ + MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, + MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, + /* SDCARD */ + MX35_PAD_SD1_CMD__ESDHC1_CMD, + MX35_PAD_SD1_CLK__ESDHC1_CLK, + MX35_PAD_SD1_DATA0__ESDHC1_DAT0, + MX35_PAD_SD1_DATA1__ESDHC1_DAT1, + MX35_PAD_SD1_DATA2__ESDHC1_DAT2, + MX35_PAD_SD1_DATA3__ESDHC1_DAT3, + /* PMIC */ + MX35_PAD_GPIO2_0__GPIO2_0, + /* GPIO keys */ + MX35_PAD_SCKR__GPIO1_4, + MX35_PAD_COMPARE__GPIO1_5, + MX35_PAD_SCKT__GPIO1_7, + MX35_PAD_FST__GPIO1_8, + MX35_PAD_HCKT__GPIO1_9, + MX35_PAD_TX5_RX0__GPIO1_10, + MX35_PAD_TX4_RX1__GPIO1_11, + MX35_PAD_TX3_RX2__GPIO1_12, +}; + +/* USB Device config */ +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI, + .workaround = FLS_USB2_WORKAROUND_ENGCM09152, +}; + +static int vpr200_usbh_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, + MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY); +} + +/* USB HOST config */ +static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { + .init = vpr200_usbh_init, + .portsc = MXC_EHCI_MODE_SERIAL, +}; + +static struct platform_device *devices[] __initdata = { + &vpr200_flash, +}; + +/* + * Board specific initialization. + */ +static void __init vpr200_board_init(void) +{ + imx35_soc_init(); + + mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads)); + + imx35_add_fec(NULL); + imx35_add_imx2_wdt(); + + imx35_add_imx_uart0(NULL); + imx35_add_imx_uart2(NULL); + + imx35_add_ipu_core(); + imx35_add_mx3_sdc_fb(&mx3fb_pdata); + + imx35_add_fsl_usb2_udc(&otg_device_pdata); + imx35_add_mxc_ehci_hs(&usb_host_pdata); + + imx35_add_mxc_nand(&vpr200_nand_board_info); + imx35_add_sdhci_esdhc_imx(0, NULL); +} + +static void __init vpr200_late_init(void) +{ + imx_add_gpio_keys(&vpr200_gpio_keys_data); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR")) + printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n"); + else + gpio_direction_output(GPIO_LCDPWR, 0); + + if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT")) + printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n"); + else + gpio_direction_input(GPIO_PMIC_INT); + + vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT); + i2c_register_board_info(0, vpr200_i2c_devices, + ARRAY_SIZE(vpr200_i2c_devices)); + + imx35_add_imx_i2c0(&vpr200_i2c0_data); +} + +static void __init vpr200_timer_init(void) +{ + mx35_clocks_init(); +} + +MACHINE_START(VPR200, "VPR200") + /* Maintainer: Creative Product Design */ + .map_io = mx35_map_io, + .init_early = imx35_init_early, + .init_irq = mx35_init_irq, + .init_time = vpr200_timer_init, + .init_machine = vpr200_board_init, + .init_late = vpr200_late_init, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c new file mode 100644 index 000000000..2e91ab2ca --- /dev/null +++ b/arch/arm/mach-imx/mm-imx21.c @@ -0,0 +1,99 @@ +/* + * arch/arm/mach-imx/mm-imx21.c + * + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/pinctrl/machine.h> +#include <asm/pgtable.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v1.h" + +/* MX21 memory map definition */ +static struct map_desc imx21_io_desc[] __initdata = { + /* + * this fixed mapping covers: + * - AIPI1 + * - AIPI2 + * - AITC + * - ROM Patch + * - and some reserved space + */ + imx_map_entry(MX21, AIPI, MT_DEVICE), + /* + * this fixed mapping covers: + * - CSI + * - ATA + */ + imx_map_entry(MX21, SAHB1, MT_DEVICE), + /* + * this fixed mapping covers: + * - EMI + */ + imx_map_entry(MX21, X_MEMC, MT_DEVICE), +}; + +/* + * Initialize the memory map. It is called during the + * system startup to create static physical to virtual + * memory map for the IO modules. + */ +void __init mx21_map_io(void) +{ + iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc)); +} + +void __init imx21_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX21); + imx_iomuxv1_init(MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR), + MX21_NUM_GPIO_PORT); +} + +void __init mx21_init_irq(void) +{ + mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); +} + +static const struct resource imx21_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX21_AUDMUX_BASE_ADDR, SZ_4K), +}; + +void __init imx21_soc_init(void) +{ + mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR)); + mxc_device_init(); + + mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + + pinctrl_provide_dummies(); + imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR, + MX21_INT_DMACH0, 0); /* No ERR irq */ + platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res, + ARRAY_SIZE(imx21_audmux_res)); +} diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c new file mode 100644 index 000000000..862b9b776 --- /dev/null +++ b/arch/arm/mach-imx/mm-imx27.c @@ -0,0 +1,103 @@ +/* + * arch/arm/mach-imx/mm-imx27.c + * + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/pinctrl/machine.h> +#include <asm/pgtable.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v1.h" + +/* MX27 memory map definition */ +static struct map_desc imx27_io_desc[] __initdata = { + /* + * this fixed mapping covers: + * - AIPI1 + * - AIPI2 + * - AITC + * - ROM Patch + * - and some reserved space + */ + imx_map_entry(MX27, AIPI, MT_DEVICE), + /* + * this fixed mapping covers: + * - CSI + * - ATA + */ + imx_map_entry(MX27, SAHB1, MT_DEVICE), + /* + * this fixed mapping covers: + * - EMI + */ + imx_map_entry(MX27, X_MEMC, MT_DEVICE), +}; + +/* + * Initialize the memory map. It is called during the + * system startup to create static physical to virtual + * memory map for the IO modules. + */ +void __init mx27_map_io(void) +{ + iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc)); +} + +void __init imx27_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX27); + imx_iomuxv1_init(MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR), + MX27_NUM_GPIO_PORT); +} + +void __init mx27_init_irq(void) +{ + mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); +} + +static const struct resource imx27_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K), +}; + +void __init imx27_soc_init(void) +{ + mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR)); + mxc_device_init(); + + /* i.mx27 has the i.mx21 type gpio */ + mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + + pinctrl_provide_dummies(); + imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR, + MX27_INT_DMACH0, 0); /* No ERR irq */ + /* imx27 has the imx21 type audmux */ + platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res, + ARRAY_SIZE(imx27_audmux_res)); + + imx27_pm_init(); +} diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c new file mode 100644 index 000000000..7638a35b3 --- /dev/null +++ b/arch/arm/mach-imx/mm-imx3.c @@ -0,0 +1,322 @@ +/* + * Copyright (C) 1999,2000 Arm Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * - add MX31 specific definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/pinctrl/machine.h> + +#include <asm/pgtable.h> +#include <asm/system_misc.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "crmregs-imx3.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v3.h" + +void __iomem *mx3_ccm_base; + +static void imx3_idle(void) +{ + unsigned long reg = 0; + + __asm__ __volatile__( + /* disable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #0x00001000\n" + "bic %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + /* invalidate I cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c5, 0\n" + /* clear and invalidate D cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c14, 0\n" + /* WFI */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c0, 4\n" + "nop\n" "nop\n" "nop\n" "nop\n" + "nop\n" "nop\n" "nop\n" + /* enable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #0x00001000\n" + "orr %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + : "=r" (reg)); +} + +static void __iomem *imx3_ioremap_caller(phys_addr_t phys_addr, size_t size, + unsigned int mtype, void *caller) +{ + if (mtype == MT_DEVICE) { + /* + * Access all peripherals below 0x80000000 as nonshared device + * on mx3, but leave l2cc alone. Otherwise cache corruptions + * can occur. + */ + if (phys_addr < 0x80000000 && + !addr_in_module(phys_addr, MX3x_L2CC)) + mtype = MT_DEVICE_NONSHARED; + } + + return __arm_ioremap_caller(phys_addr, size, mtype, caller); +} + +static void __init imx3_init_l2x0(void) +{ +#ifdef CONFIG_CACHE_L2X0 + void __iomem *l2x0_base; + void __iomem *clkctl_base; + +/* + * First of all, we must repair broken chip settings. There are some + * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These + * misconfigured CPUs will run amok immediately when the L2 cache gets enabled. + * Workaraound is to setup the correct register setting prior enabling the + * L2 cache. This should not hurt already working CPUs, as they are using the + * same value. + */ +#define L2_MEM_VAL 0x10 + + clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096); + if (clkctl_base != NULL) { + writel(0x00000515, clkctl_base + L2_MEM_VAL); + iounmap(clkctl_base); + } else { + pr_err("L2 cache: Cannot fix timing. Trying to continue without\n"); + } + + l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); + if (!l2x0_base) { + printk(KERN_ERR "remapping L2 cache area failed\n"); + return; + } + + l2x0_init(l2x0_base, 0x00030024, 0x00000000); +#endif +} + +#ifdef CONFIG_SOC_IMX31 +static struct map_desc mx31_io_desc[] __initdata = { + imx_map_entry(MX31, X_MEMC, MT_DEVICE), + imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED), + imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED), + imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED), + imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED), +}; + +/* + * This function initializes the memory map. It is called during the + * system startup to create static physical to virtual memory mappings + * for the IO modules. + */ +void __init mx31_map_io(void) +{ + iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); +} + +static void imx31_idle(void) +{ + int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR); + reg &= ~MXC_CCM_CCMR_LPM_MASK; + imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR); + + imx3_idle(); +} + +void __init imx31_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX31); + arch_ioremap_caller = imx3_ioremap_caller; + arm_pm_idle = imx31_idle; + mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR); +} + +void __init mx31_init_irq(void) +{ + mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); +} + +static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = { + .per_2_per_addr = 1677, +}; + +static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = { + .ap_2_ap_addr = 423, + .ap_2_bp_addr = 829, + .bp_2_ap_addr = 1029, +}; + +static struct sdma_platform_data imx31_sdma_pdata __initdata = { + .fw_name = "sdma-imx31-to2.bin", + .script_addrs = &imx31_to2_sdma_script, +}; + +static const struct resource imx31_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K), +}; + +static const struct resource imx31_rnga_res[] __initconst = { + DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K), +}; + +void __init imx31_soc_init(void) +{ + int to_version = mx31_revision() >> 4; + + imx3_init_l2x0(); + + mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); + mxc_device_init(); + + mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); + + pinctrl_provide_dummies(); + + if (to_version == 1) { + strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin", + strlen(imx31_sdma_pdata.fw_name)); + imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script; + } + + imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); + + imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS1_BASE_ADDR)); + imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS2_BASE_ADDR)); + + platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res, + ARRAY_SIZE(imx31_audmux_res)); + platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res, + ARRAY_SIZE(imx31_rnga_res)); +} +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +static struct map_desc mx35_io_desc[] __initdata = { + imx_map_entry(MX35, X_MEMC, MT_DEVICE), + imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), +}; + +void __init mx35_map_io(void) +{ + iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); +} + +static void imx35_idle(void) +{ + int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR); + reg &= ~MXC_CCM_CCMR_LPM_MASK; + reg |= MXC_CCM_CCMR_LPM_WAIT_MX35; + imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR); + + imx3_idle(); +} + +void __init imx35_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX35); + mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); + arm_pm_idle = imx35_idle; + arch_ioremap_caller = imx3_ioremap_caller; + mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR); +} + +void __init mx35_init_irq(void) +{ + mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); +} + +static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = { + .ap_2_ap_addr = 642, + .uart_2_mcu_addr = 817, + .mcu_2_app_addr = 747, + .uartsh_2_mcu_addr = 1183, + .per_2_shp_addr = 1033, + .mcu_2_shp_addr = 961, + .ata_2_mcu_addr = 1333, + .mcu_2_ata_addr = 1252, + .app_2_mcu_addr = 683, + .shp_2_per_addr = 1111, + .shp_2_mcu_addr = 892, +}; + +static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = { + .ap_2_ap_addr = 729, + .uart_2_mcu_addr = 904, + .per_2_app_addr = 1597, + .mcu_2_app_addr = 834, + .uartsh_2_mcu_addr = 1270, + .per_2_shp_addr = 1120, + .mcu_2_shp_addr = 1048, + .ata_2_mcu_addr = 1429, + .mcu_2_ata_addr = 1339, + .app_2_per_addr = 1531, + .app_2_mcu_addr = 770, + .shp_2_per_addr = 1198, + .shp_2_mcu_addr = 979, +}; + +static struct sdma_platform_data imx35_sdma_pdata __initdata = { + .fw_name = "sdma-imx35-to2.bin", + .script_addrs = &imx35_to2_sdma_script, +}; + +static const struct resource imx35_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K), +}; + +void __init imx35_soc_init(void) +{ + int to_version = mx35_revision() >> 4; + + imx3_init_l2x0(); + + mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); + mxc_device_init(); + + mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); + mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); + mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); + + pinctrl_provide_dummies(); + if (to_version == 1) { + strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin", + strlen(imx35_sdma_pdata.fw_name)); + imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script; + } + + imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); + + /* Setup AIPS registers */ + imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS1_BASE_ADDR)); + imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS2_BASE_ADDR)); + + /* i.mx35 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res, + ARRAY_SIZE(imx35_audmux_res)); +} +#endif /* ifdef CONFIG_SOC_IMX35 */ diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c new file mode 100644 index 000000000..14be73ca1 --- /dev/null +++ b/arch/arm/mach-imx/mmdc.c @@ -0,0 +1,613 @@ +/* + * Copyright 2017 NXP + * Copyright 2011,2016 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/clk.h> +#include <linux/hrtimer.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/perf_event.h> +#include <linux/slab.h> + +#include "common.h" + +#define MMDC_MAPSR 0x404 +#define BP_MMDC_MAPSR_PSD 0 +#define BP_MMDC_MAPSR_PSS 4 + +#define MMDC_MDMISC 0x18 +#define BM_MMDC_MDMISC_DDR_TYPE 0x18 +#define BP_MMDC_MDMISC_DDR_TYPE 0x3 + +#define TOTAL_CYCLES 0x0 +#define BUSY_CYCLES 0x1 +#define READ_ACCESSES 0x2 +#define WRITE_ACCESSES 0x3 +#define READ_BYTES 0x4 +#define WRITE_BYTES 0x5 + +/* Enables, resets, freezes, overflow profiling*/ +#define DBG_DIS 0x0 +#define DBG_EN 0x1 +#define DBG_RST 0x2 +#define PRF_FRZ 0x4 +#define CYC_OVF 0x8 +#define PROFILE_SEL 0x10 + +#define MMDC_MADPCR0 0x410 +#define MMDC_MADPCR1 0x414 +#define MMDC_MADPSR0 0x418 +#define MMDC_MADPSR1 0x41C +#define MMDC_MADPSR2 0x420 +#define MMDC_MADPSR3 0x424 +#define MMDC_MADPSR4 0x428 +#define MMDC_MADPSR5 0x42C + +#define MMDC_NUM_COUNTERS 6 + +#define MMDC_FLAG_PROFILE_SEL 0x1 +#define MMDC_PRF_AXI_ID_CLEAR 0x0 + +#define to_mmdc_pmu(p) container_of(p, struct mmdc_pmu, pmu) + +static int ddr_type; + +struct fsl_mmdc_devtype_data { + unsigned int flags; +}; + +static const struct fsl_mmdc_devtype_data imx6q_data = { +}; + +static const struct fsl_mmdc_devtype_data imx6qp_data = { + .flags = MMDC_FLAG_PROFILE_SEL, +}; + +static const struct of_device_id imx_mmdc_dt_ids[] = { + { .compatible = "fsl,imx6q-mmdc", .data = (void *)&imx6q_data}, + { .compatible = "fsl,imx6qp-mmdc", .data = (void *)&imx6qp_data}, + { /* sentinel */ } +}; + +#ifdef CONFIG_PERF_EVENTS + +static enum cpuhp_state cpuhp_mmdc_state; +static DEFINE_IDA(mmdc_ida); + +PMU_EVENT_ATTR_STRING(total-cycles, mmdc_pmu_total_cycles, "event=0x00") +PMU_EVENT_ATTR_STRING(busy-cycles, mmdc_pmu_busy_cycles, "event=0x01") +PMU_EVENT_ATTR_STRING(read-accesses, mmdc_pmu_read_accesses, "event=0x02") +PMU_EVENT_ATTR_STRING(write-accesses, mmdc_pmu_write_accesses, "event=0x03") +PMU_EVENT_ATTR_STRING(read-bytes, mmdc_pmu_read_bytes, "event=0x04") +PMU_EVENT_ATTR_STRING(read-bytes.unit, mmdc_pmu_read_bytes_unit, "MB"); +PMU_EVENT_ATTR_STRING(read-bytes.scale, mmdc_pmu_read_bytes_scale, "0.000001"); +PMU_EVENT_ATTR_STRING(write-bytes, mmdc_pmu_write_bytes, "event=0x05") +PMU_EVENT_ATTR_STRING(write-bytes.unit, mmdc_pmu_write_bytes_unit, "MB"); +PMU_EVENT_ATTR_STRING(write-bytes.scale, mmdc_pmu_write_bytes_scale, "0.000001"); + +struct mmdc_pmu { + struct pmu pmu; + void __iomem *mmdc_base; + cpumask_t cpu; + struct hrtimer hrtimer; + unsigned int active_events; + struct device *dev; + struct perf_event *mmdc_events[MMDC_NUM_COUNTERS]; + struct hlist_node node; + struct fsl_mmdc_devtype_data *devtype_data; + struct clk *mmdc_ipg_clk; +}; + +/* + * Polling period is set to one second, overflow of total-cycles (the fastest + * increasing counter) takes ten seconds so one second is safe + */ +static unsigned int mmdc_pmu_poll_period_us = 1000000; + +module_param_named(pmu_pmu_poll_period_us, mmdc_pmu_poll_period_us, uint, + S_IRUGO | S_IWUSR); + +static ktime_t mmdc_pmu_timer_period(void) +{ + return ns_to_ktime((u64)mmdc_pmu_poll_period_us * 1000); +} + +static ssize_t mmdc_pmu_cpumask_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct mmdc_pmu *pmu_mmdc = dev_get_drvdata(dev); + + return cpumap_print_to_pagebuf(true, buf, &pmu_mmdc->cpu); +} + +static struct device_attribute mmdc_pmu_cpumask_attr = + __ATTR(cpumask, S_IRUGO, mmdc_pmu_cpumask_show, NULL); + +static struct attribute *mmdc_pmu_cpumask_attrs[] = { + &mmdc_pmu_cpumask_attr.attr, + NULL, +}; + +static struct attribute_group mmdc_pmu_cpumask_attr_group = { + .attrs = mmdc_pmu_cpumask_attrs, +}; + +static struct attribute *mmdc_pmu_events_attrs[] = { + &mmdc_pmu_total_cycles.attr.attr, + &mmdc_pmu_busy_cycles.attr.attr, + &mmdc_pmu_read_accesses.attr.attr, + &mmdc_pmu_write_accesses.attr.attr, + &mmdc_pmu_read_bytes.attr.attr, + &mmdc_pmu_read_bytes_unit.attr.attr, + &mmdc_pmu_read_bytes_scale.attr.attr, + &mmdc_pmu_write_bytes.attr.attr, + &mmdc_pmu_write_bytes_unit.attr.attr, + &mmdc_pmu_write_bytes_scale.attr.attr, + NULL, +}; + +static struct attribute_group mmdc_pmu_events_attr_group = { + .name = "events", + .attrs = mmdc_pmu_events_attrs, +}; + +PMU_FORMAT_ATTR(event, "config:0-63"); +PMU_FORMAT_ATTR(axi_id, "config1:0-63"); + +static struct attribute *mmdc_pmu_format_attrs[] = { + &format_attr_event.attr, + &format_attr_axi_id.attr, + NULL, +}; + +static struct attribute_group mmdc_pmu_format_attr_group = { + .name = "format", + .attrs = mmdc_pmu_format_attrs, +}; + +static const struct attribute_group *attr_groups[] = { + &mmdc_pmu_events_attr_group, + &mmdc_pmu_format_attr_group, + &mmdc_pmu_cpumask_attr_group, + NULL, +}; + +static u32 mmdc_pmu_read_counter(struct mmdc_pmu *pmu_mmdc, int cfg) +{ + void __iomem *mmdc_base, *reg; + + mmdc_base = pmu_mmdc->mmdc_base; + + switch (cfg) { + case TOTAL_CYCLES: + reg = mmdc_base + MMDC_MADPSR0; + break; + case BUSY_CYCLES: + reg = mmdc_base + MMDC_MADPSR1; + break; + case READ_ACCESSES: + reg = mmdc_base + MMDC_MADPSR2; + break; + case WRITE_ACCESSES: + reg = mmdc_base + MMDC_MADPSR3; + break; + case READ_BYTES: + reg = mmdc_base + MMDC_MADPSR4; + break; + case WRITE_BYTES: + reg = mmdc_base + MMDC_MADPSR5; + break; + default: + return WARN_ONCE(1, + "invalid configuration %d for mmdc counter", cfg); + } + return readl(reg); +} + +static int mmdc_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node) +{ + struct mmdc_pmu *pmu_mmdc = hlist_entry_safe(node, struct mmdc_pmu, node); + int target; + + if (!cpumask_test_and_clear_cpu(cpu, &pmu_mmdc->cpu)) + return 0; + + target = cpumask_any_but(cpu_online_mask, cpu); + if (target >= nr_cpu_ids) + return 0; + + perf_pmu_migrate_context(&pmu_mmdc->pmu, cpu, target); + cpumask_set_cpu(target, &pmu_mmdc->cpu); + + return 0; +} + +static bool mmdc_pmu_group_event_is_valid(struct perf_event *event, + struct pmu *pmu, + unsigned long *used_counters) +{ + int cfg = event->attr.config; + + if (is_software_event(event)) + return true; + + if (event->pmu != pmu) + return false; + + return !test_and_set_bit(cfg, used_counters); +} + +/* + * Each event has a single fixed-purpose counter, so we can only have a + * single active event for each at any point in time. Here we just check + * for duplicates, and rely on mmdc_pmu_event_init to verify that the HW + * event numbers are valid. + */ +static bool mmdc_pmu_group_is_valid(struct perf_event *event) +{ + struct pmu *pmu = event->pmu; + struct perf_event *leader = event->group_leader; + struct perf_event *sibling; + unsigned long counter_mask = 0; + + set_bit(leader->attr.config, &counter_mask); + + if (event != leader) { + if (!mmdc_pmu_group_event_is_valid(event, pmu, &counter_mask)) + return false; + } + + for_each_sibling_event(sibling, leader) { + if (!mmdc_pmu_group_event_is_valid(sibling, pmu, &counter_mask)) + return false; + } + + return true; +} + +static int mmdc_pmu_event_init(struct perf_event *event) +{ + struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu); + int cfg = event->attr.config; + + if (event->attr.type != event->pmu->type) + return -ENOENT; + + if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK) + return -EOPNOTSUPP; + + if (event->cpu < 0) { + dev_warn(pmu_mmdc->dev, "Can't provide per-task data!\n"); + return -EOPNOTSUPP; + } + + if (event->attr.exclude_user || + event->attr.exclude_kernel || + event->attr.exclude_hv || + event->attr.exclude_idle || + event->attr.exclude_host || + event->attr.exclude_guest || + event->attr.sample_period) + return -EINVAL; + + if (cfg < 0 || cfg >= MMDC_NUM_COUNTERS) + return -EINVAL; + + if (!mmdc_pmu_group_is_valid(event)) + return -EINVAL; + + event->cpu = cpumask_first(&pmu_mmdc->cpu); + return 0; +} + +static void mmdc_pmu_event_update(struct perf_event *event) +{ + struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + u64 delta, prev_raw_count, new_raw_count; + + do { + prev_raw_count = local64_read(&hwc->prev_count); + new_raw_count = mmdc_pmu_read_counter(pmu_mmdc, + event->attr.config); + } while (local64_cmpxchg(&hwc->prev_count, prev_raw_count, + new_raw_count) != prev_raw_count); + + delta = (new_raw_count - prev_raw_count) & 0xFFFFFFFF; + + local64_add(delta, &event->count); +} + +static void mmdc_pmu_event_start(struct perf_event *event, int flags) +{ + struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + void __iomem *mmdc_base, *reg; + u32 val; + + mmdc_base = pmu_mmdc->mmdc_base; + reg = mmdc_base + MMDC_MADPCR0; + + /* + * hrtimer is required because mmdc does not provide an interrupt so + * polling is necessary + */ + hrtimer_start(&pmu_mmdc->hrtimer, mmdc_pmu_timer_period(), + HRTIMER_MODE_REL_PINNED); + + local64_set(&hwc->prev_count, 0); + + writel(DBG_RST, reg); + + /* + * Write the AXI id parameter to MADPCR1. + */ + val = event->attr.config1; + reg = mmdc_base + MMDC_MADPCR1; + writel(val, reg); + + reg = mmdc_base + MMDC_MADPCR0; + val = DBG_EN; + if (pmu_mmdc->devtype_data->flags & MMDC_FLAG_PROFILE_SEL) + val |= PROFILE_SEL; + + writel(val, reg); +} + +static int mmdc_pmu_event_add(struct perf_event *event, int flags) +{ + struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + + int cfg = event->attr.config; + + if (flags & PERF_EF_START) + mmdc_pmu_event_start(event, flags); + + if (pmu_mmdc->mmdc_events[cfg] != NULL) + return -EAGAIN; + + pmu_mmdc->mmdc_events[cfg] = event; + pmu_mmdc->active_events++; + + local64_set(&hwc->prev_count, mmdc_pmu_read_counter(pmu_mmdc, cfg)); + + return 0; +} + +static void mmdc_pmu_event_stop(struct perf_event *event, int flags) +{ + struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu); + void __iomem *mmdc_base, *reg; + + mmdc_base = pmu_mmdc->mmdc_base; + reg = mmdc_base + MMDC_MADPCR0; + + writel(PRF_FRZ, reg); + + reg = mmdc_base + MMDC_MADPCR1; + writel(MMDC_PRF_AXI_ID_CLEAR, reg); + + mmdc_pmu_event_update(event); +} + +static void mmdc_pmu_event_del(struct perf_event *event, int flags) +{ + struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu); + int cfg = event->attr.config; + + pmu_mmdc->mmdc_events[cfg] = NULL; + pmu_mmdc->active_events--; + + if (pmu_mmdc->active_events == 0) + hrtimer_cancel(&pmu_mmdc->hrtimer); + + mmdc_pmu_event_stop(event, PERF_EF_UPDATE); +} + +static void mmdc_pmu_overflow_handler(struct mmdc_pmu *pmu_mmdc) +{ + int i; + + for (i = 0; i < MMDC_NUM_COUNTERS; i++) { + struct perf_event *event = pmu_mmdc->mmdc_events[i]; + + if (event) + mmdc_pmu_event_update(event); + } +} + +static enum hrtimer_restart mmdc_pmu_timer_handler(struct hrtimer *hrtimer) +{ + struct mmdc_pmu *pmu_mmdc = container_of(hrtimer, struct mmdc_pmu, + hrtimer); + + mmdc_pmu_overflow_handler(pmu_mmdc); + hrtimer_forward_now(hrtimer, mmdc_pmu_timer_period()); + + return HRTIMER_RESTART; +} + +static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc, + void __iomem *mmdc_base, struct device *dev) +{ + int mmdc_num; + + *pmu_mmdc = (struct mmdc_pmu) { + .pmu = (struct pmu) { + .task_ctx_nr = perf_invalid_context, + .attr_groups = attr_groups, + .event_init = mmdc_pmu_event_init, + .add = mmdc_pmu_event_add, + .del = mmdc_pmu_event_del, + .start = mmdc_pmu_event_start, + .stop = mmdc_pmu_event_stop, + .read = mmdc_pmu_event_update, + }, + .mmdc_base = mmdc_base, + .dev = dev, + .active_events = 0, + }; + + mmdc_num = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL); + + return mmdc_num; +} + +static int imx_mmdc_remove(struct platform_device *pdev) +{ + struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev); + + cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node); + perf_pmu_unregister(&pmu_mmdc->pmu); + iounmap(pmu_mmdc->mmdc_base); + clk_disable_unprepare(pmu_mmdc->mmdc_ipg_clk); + kfree(pmu_mmdc); + return 0; +} + +static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base, + struct clk *mmdc_ipg_clk) +{ + struct mmdc_pmu *pmu_mmdc; + char *name; + int mmdc_num; + int ret; + const struct of_device_id *of_id = + of_match_device(imx_mmdc_dt_ids, &pdev->dev); + + pmu_mmdc = kzalloc(sizeof(*pmu_mmdc), GFP_KERNEL); + if (!pmu_mmdc) { + pr_err("failed to allocate PMU device!\n"); + return -ENOMEM; + } + + /* The first instance registers the hotplug state */ + if (!cpuhp_mmdc_state) { + ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, + "perf/arm/mmdc:online", NULL, + mmdc_pmu_offline_cpu); + if (ret < 0) { + pr_err("cpuhp_setup_state_multi failed\n"); + goto pmu_free; + } + cpuhp_mmdc_state = ret; + } + + mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev); + pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk; + if (mmdc_num == 0) + name = "mmdc"; + else + name = devm_kasprintf(&pdev->dev, + GFP_KERNEL, "mmdc%d", mmdc_num); + + pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data; + + hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + pmu_mmdc->hrtimer.function = mmdc_pmu_timer_handler; + + cpumask_set_cpu(raw_smp_processor_id(), &pmu_mmdc->cpu); + + /* Register the pmu instance for cpu hotplug */ + cpuhp_state_add_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node); + + ret = perf_pmu_register(&(pmu_mmdc->pmu), name, -1); + if (ret) + goto pmu_register_err; + + platform_set_drvdata(pdev, pmu_mmdc); + return 0; + +pmu_register_err: + pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret); + cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node); + hrtimer_cancel(&pmu_mmdc->hrtimer); +pmu_free: + kfree(pmu_mmdc); + return ret; +} + +#else +#define imx_mmdc_remove NULL +#define imx_mmdc_perf_init(pdev, mmdc_base, mmdc_ipg_clk) 0 +#endif + +static int imx_mmdc_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + void __iomem *mmdc_base, *reg; + struct clk *mmdc_ipg_clk; + u32 val; + int err; + + /* the ipg clock is optional */ + mmdc_ipg_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(mmdc_ipg_clk)) + mmdc_ipg_clk = NULL; + + err = clk_prepare_enable(mmdc_ipg_clk); + if (err) { + dev_err(&pdev->dev, "Unable to enable mmdc ipg clock.\n"); + return err; + } + + mmdc_base = of_iomap(np, 0); + WARN_ON(!mmdc_base); + + reg = mmdc_base + MMDC_MDMISC; + /* Get ddr type */ + val = readl_relaxed(reg); + ddr_type = (val & BM_MMDC_MDMISC_DDR_TYPE) >> + BP_MMDC_MDMISC_DDR_TYPE; + + reg = mmdc_base + MMDC_MAPSR; + + /* Enable automatic power saving */ + val = readl_relaxed(reg); + val &= ~(1 << BP_MMDC_MAPSR_PSD); + writel_relaxed(val, reg); + + err = imx_mmdc_perf_init(pdev, mmdc_base, mmdc_ipg_clk); + if (err) { + iounmap(mmdc_base); + clk_disable_unprepare(mmdc_ipg_clk); + } + + return err; +} + +int imx_mmdc_get_ddr_type(void) +{ + return ddr_type; +} + +static struct platform_driver imx_mmdc_driver = { + .driver = { + .name = "imx-mmdc", + .of_match_table = imx_mmdc_dt_ids, + }, + .probe = imx_mmdc_probe, + .remove = imx_mmdc_remove, +}; + +static int __init imx_mmdc_init(void) +{ + return platform_driver_register(&imx_mmdc_driver); +} +postcore_initcall(imx_mmdc_init); diff --git a/arch/arm/mach-imx/mx21.h b/arch/arm/mach-imx/mx21.h new file mode 100644 index 000000000..468738aa9 --- /dev/null +++ b/arch/arm/mach-imx/mx21.h @@ -0,0 +1,189 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2009 Holger Schurig, hs4233@mail.mn-solutions.de + * + * This contains i.MX21-specific hardware definitions. For those + * hardware pieces that are common between i.MX21 and i.MX27, have a + * look at mx2x.h. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_MX21_H__ +#define __MACH_MX21_H__ + +#define MX21_AIPI_BASE_ADDR 0x10000000 +#define MX21_AIPI_SIZE SZ_1M +#define MX21_DMA_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x01000) +#define MX21_WDOG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x02000) +#define MX21_GPT1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x03000) +#define MX21_GPT2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x04000) +#define MX21_GPT3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x05000) +#define MX21_PWM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x06000) +#define MX21_RTC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x07000) +#define MX21_KPP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x08000) +#define MX21_OWIRE_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x09000) +#define MX21_UART1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0a000) +#define MX21_UART2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0b000) +#define MX21_UART3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0c000) +#define MX21_UART4_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0d000) +#define MX21_CSPI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0e000) +#define MX21_CSPI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0f000) +#define MX21_SSI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x10000) +#define MX21_SSI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x11000) +#define MX21_I2C_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x12000) +#define MX21_SDHC1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x13000) +#define MX21_SDHC2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x14000) +#define MX21_GPIO_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x15000) +#define MX21_GPIO1_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x000) +#define MX21_GPIO2_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x100) +#define MX21_GPIO3_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x200) +#define MX21_GPIO4_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x300) +#define MX21_GPIO5_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x400) +#define MX21_GPIO6_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x500) +#define MX21_AUDMUX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x16000) +#define MX21_CSPI3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x17000) +#define MX21_LCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x21000) +#define MX21_SLCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x22000) +#define MX21_USBOTG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x24000) +#define MX21_EMMA_PP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26000) +#define MX21_EMMA_PRP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26400) +#define MX21_CCM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27000) +#define MX21_SYSCTRL_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27800) +#define MX21_JAM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3e000) +#define MX21_MAX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3f000) + +#define MX21_AVIC_BASE_ADDR 0x10040000 + +#define MX21_SAHB1_BASE_ADDR 0x80000000 +#define MX21_SAHB1_SIZE SZ_1M +#define MX21_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000) + +/* Memory regions and CS */ +#define MX21_SDRAM_BASE_ADDR 0xc0000000 +#define MX21_CSD1_BASE_ADDR 0xc4000000 + +#define MX21_CS0_BASE_ADDR 0xc8000000 +#define MX21_CS1_BASE_ADDR 0xcc000000 +#define MX21_CS2_BASE_ADDR 0xd0000000 +#define MX21_CS3_BASE_ADDR 0xd1000000 +#define MX21_CS4_BASE_ADDR 0xd2000000 +#define MX21_PCMCIA_MEM_BASE_ADDR 0xd4000000 +#define MX21_CS5_BASE_ADDR 0xdd000000 + +/* NAND, SDRAM, WEIM etc controllers */ +#define MX21_X_MEMC_BASE_ADDR 0xdf000000 +#define MX21_X_MEMC_SIZE SZ_256K + +#define MX21_SDRAMC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x0000) +#define MX21_EIM_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x1000) +#define MX21_PCMCIA_CTL_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x2000) +#define MX21_NFC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x3000) + +#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */ + +#define MX21_IO_P2V(x) IMX_IO_P2V(x) +#define MX21_IO_ADDRESS(x) IOMEM(MX21_IO_P2V(x)) + +/* fixed interrupt numbers */ +#include <asm/irq.h> +#define MX21_INT_CSPI3 (NR_IRQS_LEGACY + 6) +#define MX21_INT_GPIO (NR_IRQS_LEGACY + 8) +#define MX21_INT_FIRI (NR_IRQS_LEGACY + 9) +#define MX21_INT_SDHC2 (NR_IRQS_LEGACY + 10) +#define MX21_INT_SDHC1 (NR_IRQS_LEGACY + 11) +#define MX21_INT_I2C (NR_IRQS_LEGACY + 12) +#define MX21_INT_SSI2 (NR_IRQS_LEGACY + 13) +#define MX21_INT_SSI1 (NR_IRQS_LEGACY + 14) +#define MX21_INT_CSPI2 (NR_IRQS_LEGACY + 15) +#define MX21_INT_CSPI1 (NR_IRQS_LEGACY + 16) +#define MX21_INT_UART4 (NR_IRQS_LEGACY + 17) +#define MX21_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX21_INT_UART2 (NR_IRQS_LEGACY + 19) +#define MX21_INT_UART1 (NR_IRQS_LEGACY + 20) +#define MX21_INT_KPP (NR_IRQS_LEGACY + 21) +#define MX21_INT_RTC (NR_IRQS_LEGACY + 22) +#define MX21_INT_PWM (NR_IRQS_LEGACY + 23) +#define MX21_INT_GPT3 (NR_IRQS_LEGACY + 24) +#define MX21_INT_GPT2 (NR_IRQS_LEGACY + 25) +#define MX21_INT_GPT1 (NR_IRQS_LEGACY + 26) +#define MX21_INT_WDOG (NR_IRQS_LEGACY + 27) +#define MX21_INT_PCMCIA (NR_IRQS_LEGACY + 28) +#define MX21_INT_NFC (NR_IRQS_LEGACY + 29) +#define MX21_INT_BMI (NR_IRQS_LEGACY + 30) +#define MX21_INT_CSI (NR_IRQS_LEGACY + 31) +#define MX21_INT_DMACH0 (NR_IRQS_LEGACY + 32) +#define MX21_INT_DMACH1 (NR_IRQS_LEGACY + 33) +#define MX21_INT_DMACH2 (NR_IRQS_LEGACY + 34) +#define MX21_INT_DMACH3 (NR_IRQS_LEGACY + 35) +#define MX21_INT_DMACH4 (NR_IRQS_LEGACY + 36) +#define MX21_INT_DMACH5 (NR_IRQS_LEGACY + 37) +#define MX21_INT_DMACH6 (NR_IRQS_LEGACY + 38) +#define MX21_INT_DMACH7 (NR_IRQS_LEGACY + 39) +#define MX21_INT_DMACH8 (NR_IRQS_LEGACY + 40) +#define MX21_INT_DMACH9 (NR_IRQS_LEGACY + 41) +#define MX21_INT_DMACH10 (NR_IRQS_LEGACY + 42) +#define MX21_INT_DMACH11 (NR_IRQS_LEGACY + 43) +#define MX21_INT_DMACH12 (NR_IRQS_LEGACY + 44) +#define MX21_INT_DMACH13 (NR_IRQS_LEGACY + 45) +#define MX21_INT_DMACH14 (NR_IRQS_LEGACY + 46) +#define MX21_INT_DMACH15 (NR_IRQS_LEGACY + 47) +#define MX21_INT_EMMAENC (NR_IRQS_LEGACY + 49) +#define MX21_INT_EMMADEC (NR_IRQS_LEGACY + 50) +#define MX21_INT_EMMAPRP (NR_IRQS_LEGACY + 51) +#define MX21_INT_EMMAPP (NR_IRQS_LEGACY + 52) +#define MX21_INT_USBWKUP (NR_IRQS_LEGACY + 53) +#define MX21_INT_USBDMA (NR_IRQS_LEGACY + 54) +#define MX21_INT_USBHOST (NR_IRQS_LEGACY + 55) +#define MX21_INT_USBFUNC (NR_IRQS_LEGACY + 56) +#define MX21_INT_USBMNP (NR_IRQS_LEGACY + 57) +#define MX21_INT_USBCTRL (NR_IRQS_LEGACY + 58) +#define MX21_INT_SLCDC (NR_IRQS_LEGACY + 60) +#define MX21_INT_LCDC (NR_IRQS_LEGACY + 61) + +/* fixed DMA request numbers */ +#define MX21_DMA_REQ_CSPI3_RX 1 +#define MX21_DMA_REQ_CSPI3_TX 2 +#define MX21_DMA_REQ_EXT 3 +#define MX21_DMA_REQ_FIRI_RX 4 +#define MX21_DMA_REQ_SDHC2 6 +#define MX21_DMA_REQ_SDHC1 7 +#define MX21_DMA_REQ_SSI2_RX0 8 +#define MX21_DMA_REQ_SSI2_TX0 9 +#define MX21_DMA_REQ_SSI2_RX1 10 +#define MX21_DMA_REQ_SSI2_TX1 11 +#define MX21_DMA_REQ_SSI1_RX0 12 +#define MX21_DMA_REQ_SSI1_TX0 13 +#define MX21_DMA_REQ_SSI1_RX1 14 +#define MX21_DMA_REQ_SSI1_TX1 15 +#define MX21_DMA_REQ_CSPI2_RX 16 +#define MX21_DMA_REQ_CSPI2_TX 17 +#define MX21_DMA_REQ_CSPI1_RX 18 +#define MX21_DMA_REQ_CSPI1_TX 19 +#define MX21_DMA_REQ_UART4_RX 20 +#define MX21_DMA_REQ_UART4_TX 21 +#define MX21_DMA_REQ_UART3_RX 22 +#define MX21_DMA_REQ_UART3_TX 23 +#define MX21_DMA_REQ_UART2_RX 24 +#define MX21_DMA_REQ_UART2_TX 25 +#define MX21_DMA_REQ_UART1_RX 26 +#define MX21_DMA_REQ_UART1_TX 27 +#define MX21_DMA_REQ_BMI_TX 28 +#define MX21_DMA_REQ_BMI_RX 29 +#define MX21_DMA_REQ_CSI_STAT 30 +#define MX21_DMA_REQ_CSI_RX 31 + +#endif /* ifndef __MACH_MX21_H__ */ diff --git a/arch/arm/mach-imx/mx27.h b/arch/arm/mach-imx/mx27.h new file mode 100644 index 000000000..f96bb2642 --- /dev/null +++ b/arch/arm/mach-imx/mx27.h @@ -0,0 +1,234 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This contains i.MX27-specific hardware definitions. For those + * hardware pieces that are common between i.MX21 and i.MX27, have a + * look at mx2x.h. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_MX27_H__ +#define __MACH_MX27_H__ + +#define MX27_AIPI_BASE_ADDR 0x10000000 +#define MX27_AIPI_SIZE SZ_1M +#define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000) +#define MX27_WDOG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x02000) +#define MX27_GPT1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x03000) +#define MX27_GPT2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x04000) +#define MX27_GPT3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x05000) +#define MX27_PWM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x06000) +#define MX27_RTC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x07000) +#define MX27_KPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x08000) +#define MX27_OWIRE_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x09000) +#define MX27_UART1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0a000) +#define MX27_UART2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0b000) +#define MX27_UART3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0c000) +#define MX27_UART4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0d000) +#define MX27_CSPI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0e000) +#define MX27_CSPI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0f000) +#define MX27_SSI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x10000) +#define MX27_SSI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x11000) +#define MX27_I2C1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000) +#define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000) +#define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000) +#define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000) +#define MX27_GPIO1_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x000) +#define MX27_GPIO2_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x100) +#define MX27_GPIO3_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x200) +#define MX27_GPIO4_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x300) +#define MX27_GPIO5_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x400) +#define MX27_GPIO6_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x500) +#define MX27_AUDMUX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x16000) +#define MX27_CSPI3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x17000) +#define MX27_MSHC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x18000) +#define MX27_GPT4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x19000) +#define MX27_GPT5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1a000) +#define MX27_UART5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1b000) +#define MX27_UART6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1c000) +#define MX27_I2C2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1d000) +#define MX27_SDHC3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1e000) +#define MX27_GPT6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1f000) +#define MX27_LCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x21000) +#define MX27_SLCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x22000) +#define MX27_VPU_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x23000) +#define MX27_USB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x24000) +#define MX27_USB_OTG_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0000) +#define MX27_USB_HS1_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0200) +#define MX27_USB_HS2_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0400) +#define MX27_SAHARA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x25000) +#define MX27_EMMAPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26000) +#define MX27_EMMAPRP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26400) +#define MX27_CCM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27000) +#define MX27_SYSCTRL_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27800) +#define MX27_IIM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x28000) +#define MX27_RTIC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2a000) +#define MX27_FEC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2b000) +#define MX27_SCC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2c000) +#define MX27_ETB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3b000) +#define MX27_ETB_RAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3c000) +#define MX27_JAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3e000) +#define MX27_MAX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3f000) + +#define MX27_AVIC_BASE_ADDR 0x10040000 + +/* ROM patch */ +#define MX27_ROMP_BASE_ADDR 0x10041000 + +#define MX27_SAHB1_BASE_ADDR 0x80000000 +#define MX27_SAHB1_SIZE SZ_1M +#define MX27_CSI_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x0000) +#define MX27_ATA_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x1000) + +/* Memory regions and CS */ +#define MX27_SDRAM_BASE_ADDR 0xa0000000 +#define MX27_CSD1_BASE_ADDR 0xb0000000 + +#define MX27_CS0_BASE_ADDR 0xc0000000 +#define MX27_CS1_BASE_ADDR 0xc8000000 +#define MX27_CS2_BASE_ADDR 0xd0000000 +#define MX27_CS3_BASE_ADDR 0xd2000000 +#define MX27_CS4_BASE_ADDR 0xd4000000 +#define MX27_CS5_BASE_ADDR 0xd6000000 + +/* NAND, SDRAM, WEIM, M3IF, EMI controllers */ +#define MX27_X_MEMC_BASE_ADDR 0xd8000000 +#define MX27_X_MEMC_SIZE SZ_1M +#define MX27_NFC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR) +#define MX27_SDRAMC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x1000) +#define MX27_WEIM_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x2000) +#define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000) +#define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000) + +#define MX27_WEIM_CSCRx_BASE_ADDR(cs) (MX27_WEIM_BASE_ADDR + (cs) * 0x10) +#define MX27_WEIM_CSCRxU(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs)) +#define MX27_WEIM_CSCRxL(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4) +#define MX27_WEIM_CSCRxA(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8) + +#define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000 + +/* IRAM */ +#define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */ + +#define MX27_IO_P2V(x) IMX_IO_P2V(x) +#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x)) + +/* fixed interrupt numbers */ +#include <asm/irq.h> +#define MX27_INT_I2C2 (NR_IRQS_LEGACY + 1) +#define MX27_INT_GPT6 (NR_IRQS_LEGACY + 2) +#define MX27_INT_GPT5 (NR_IRQS_LEGACY + 3) +#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4) +#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5) +#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6) +#define MX27_INT_MSHC (NR_IRQS_LEGACY + 7) +#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8) +#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9) +#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10) +#define MX27_INT_SDHC1 (NR_IRQS_LEGACY + 11) +#define MX27_INT_I2C1 (NR_IRQS_LEGACY + 12) +#define MX27_INT_SSI2 (NR_IRQS_LEGACY + 13) +#define MX27_INT_SSI1 (NR_IRQS_LEGACY + 14) +#define MX27_INT_CSPI2 (NR_IRQS_LEGACY + 15) +#define MX27_INT_CSPI1 (NR_IRQS_LEGACY + 16) +#define MX27_INT_UART4 (NR_IRQS_LEGACY + 17) +#define MX27_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX27_INT_UART2 (NR_IRQS_LEGACY + 19) +#define MX27_INT_UART1 (NR_IRQS_LEGACY + 20) +#define MX27_INT_KPP (NR_IRQS_LEGACY + 21) +#define MX27_INT_RTC (NR_IRQS_LEGACY + 22) +#define MX27_INT_PWM (NR_IRQS_LEGACY + 23) +#define MX27_INT_GPT3 (NR_IRQS_LEGACY + 24) +#define MX27_INT_GPT2 (NR_IRQS_LEGACY + 25) +#define MX27_INT_GPT1 (NR_IRQS_LEGACY + 26) +#define MX27_INT_WDOG (NR_IRQS_LEGACY + 27) +#define MX27_INT_PCMCIA (NR_IRQS_LEGACY + 28) +#define MX27_INT_NFC (NR_IRQS_LEGACY + 29) +#define MX27_INT_ATA (NR_IRQS_LEGACY + 30) +#define MX27_INT_CSI (NR_IRQS_LEGACY + 31) +#define MX27_INT_DMACH0 (NR_IRQS_LEGACY + 32) +#define MX27_INT_DMACH1 (NR_IRQS_LEGACY + 33) +#define MX27_INT_DMACH2 (NR_IRQS_LEGACY + 34) +#define MX27_INT_DMACH3 (NR_IRQS_LEGACY + 35) +#define MX27_INT_DMACH4 (NR_IRQS_LEGACY + 36) +#define MX27_INT_DMACH5 (NR_IRQS_LEGACY + 37) +#define MX27_INT_DMACH6 (NR_IRQS_LEGACY + 38) +#define MX27_INT_DMACH7 (NR_IRQS_LEGACY + 39) +#define MX27_INT_DMACH8 (NR_IRQS_LEGACY + 40) +#define MX27_INT_DMACH9 (NR_IRQS_LEGACY + 41) +#define MX27_INT_DMACH10 (NR_IRQS_LEGACY + 42) +#define MX27_INT_DMACH11 (NR_IRQS_LEGACY + 43) +#define MX27_INT_DMACH12 (NR_IRQS_LEGACY + 44) +#define MX27_INT_DMACH13 (NR_IRQS_LEGACY + 45) +#define MX27_INT_DMACH14 (NR_IRQS_LEGACY + 46) +#define MX27_INT_DMACH15 (NR_IRQS_LEGACY + 47) +#define MX27_INT_UART6 (NR_IRQS_LEGACY + 48) +#define MX27_INT_UART5 (NR_IRQS_LEGACY + 49) +#define MX27_INT_FEC (NR_IRQS_LEGACY + 50) +#define MX27_INT_EMMAPRP (NR_IRQS_LEGACY + 51) +#define MX27_INT_EMMAPP (NR_IRQS_LEGACY + 52) +#define MX27_INT_VPU (NR_IRQS_LEGACY + 53) +#define MX27_INT_USB_HS1 (NR_IRQS_LEGACY + 54) +#define MX27_INT_USB_HS2 (NR_IRQS_LEGACY + 55) +#define MX27_INT_USB_OTG (NR_IRQS_LEGACY + 56) +#define MX27_INT_SCC_SMN (NR_IRQS_LEGACY + 57) +#define MX27_INT_SCC_SCM (NR_IRQS_LEGACY + 58) +#define MX27_INT_SAHARA (NR_IRQS_LEGACY + 59) +#define MX27_INT_SLCDC (NR_IRQS_LEGACY + 60) +#define MX27_INT_LCDC (NR_IRQS_LEGACY + 61) +#define MX27_INT_IIM (NR_IRQS_LEGACY + 62) +#define MX27_INT_CCM (NR_IRQS_LEGACY + 63) + +/* fixed DMA request numbers */ +#define MX27_DMA_REQ_CSPI3_RX 1 +#define MX27_DMA_REQ_CSPI3_TX 2 +#define MX27_DMA_REQ_EXT 3 +#define MX27_DMA_REQ_MSHC 4 +#define MX27_DMA_REQ_SDHC2 6 +#define MX27_DMA_REQ_SDHC1 7 +#define MX27_DMA_REQ_SSI2_RX0 8 +#define MX27_DMA_REQ_SSI2_TX0 9 +#define MX27_DMA_REQ_SSI2_RX1 10 +#define MX27_DMA_REQ_SSI2_TX1 11 +#define MX27_DMA_REQ_SSI1_RX0 12 +#define MX27_DMA_REQ_SSI1_TX0 13 +#define MX27_DMA_REQ_SSI1_RX1 14 +#define MX27_DMA_REQ_SSI1_TX1 15 +#define MX27_DMA_REQ_CSPI2_RX 16 +#define MX27_DMA_REQ_CSPI2_TX 17 +#define MX27_DMA_REQ_CSPI1_RX 18 +#define MX27_DMA_REQ_CSPI1_TX 19 +#define MX27_DMA_REQ_UART4_RX 20 +#define MX27_DMA_REQ_UART4_TX 21 +#define MX27_DMA_REQ_UART3_RX 22 +#define MX27_DMA_REQ_UART3_TX 23 +#define MX27_DMA_REQ_UART2_RX 24 +#define MX27_DMA_REQ_UART2_TX 25 +#define MX27_DMA_REQ_UART1_RX 26 +#define MX27_DMA_REQ_UART1_TX 27 +#define MX27_DMA_REQ_ATA_TX 28 +#define MX27_DMA_REQ_ATA_RCV 29 +#define MX27_DMA_REQ_CSI_STAT 30 +#define MX27_DMA_REQ_CSI_RX 31 +#define MX27_DMA_REQ_UART5_TX 32 +#define MX27_DMA_REQ_UART5_RX 33 +#define MX27_DMA_REQ_UART6_TX 34 +#define MX27_DMA_REQ_UART6_RX 35 +#define MX27_DMA_REQ_SDHC3 36 +#define MX27_DMA_REQ_NFC 37 + +#endif /* ifndef __MACH_MX27_H__ */ diff --git a/arch/arm/mach-imx/mx2x.h b/arch/arm/mach-imx/mx2x.h new file mode 100644 index 000000000..11642f5b2 --- /dev/null +++ b/arch/arm/mach-imx/mx2x.h @@ -0,0 +1,145 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This contains hardware definitions that are common between i.MX21 and + * i.MX27. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_MX2x_H__ +#define __MACH_MX2x_H__ + +/* The following addresses are common between i.MX21 and i.MX27 */ + +/* Register offsets */ +#define MX2x_AIPI_BASE_ADDR 0x10000000 +#define MX2x_AIPI_SIZE SZ_1M +#define MX2x_DMA_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x01000) +#define MX2x_WDOG_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x02000) +#define MX2x_GPT1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x03000) +#define MX2x_GPT2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x04000) +#define MX2x_GPT3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x05000) +#define MX2x_PWM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x06000) +#define MX2x_RTC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x07000) +#define MX2x_KPP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x08000) +#define MX2x_OWIRE_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x09000) +#define MX2x_UART1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0a000) +#define MX2x_UART2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0b000) +#define MX2x_UART3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0c000) +#define MX2x_UART4_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0d000) +#define MX2x_CSPI1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0e000) +#define MX2x_CSPI2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0f000) +#define MX2x_SSI1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x10000) +#define MX2x_SSI2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x11000) +#define MX2x_I2C_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x12000) +#define MX2x_SDHC1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x13000) +#define MX2x_SDHC2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x14000) +#define MX2x_GPIO_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x15000) +#define MX2x_AUDMUX_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x16000) +#define MX2x_CSPI3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x17000) +#define MX2x_LCDC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x21000) +#define MX2x_SLCDC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x22000) +#define MX2x_USBOTG_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x24000) +#define MX2x_EMMA_PP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x26000) +#define MX2x_EMMA_PRP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x26400) +#define MX2x_CCM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x27000) +#define MX2x_SYSCTRL_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x27800) +#define MX2x_JAM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x3e000) +#define MX2x_MAX_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x3f000) + +#define MX2x_AVIC_BASE_ADDR 0x10040000 + +#define MX2x_SAHB1_BASE_ADDR 0x80000000 +#define MX2x_SAHB1_SIZE SZ_1M +#define MX2x_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000) + +/* fixed interrupt numbers */ +#include <asm/irq.h> +#define MX2x_INT_CSPI3 (NR_IRQS_LEGACY + 6) +#define MX2x_INT_GPIO (NR_IRQS_LEGACY + 8) +#define MX2x_INT_SDHC2 (NR_IRQS_LEGACY + 10) +#define MX2x_INT_SDHC1 (NR_IRQS_LEGACY + 11) +#define MX2x_INT_I2C (NR_IRQS_LEGACY + 12) +#define MX2x_INT_SSI2 (NR_IRQS_LEGACY + 13) +#define MX2x_INT_SSI1 (NR_IRQS_LEGACY + 14) +#define MX2x_INT_CSPI2 (NR_IRQS_LEGACY + 15) +#define MX2x_INT_CSPI1 (NR_IRQS_LEGACY + 16) +#define MX2x_INT_UART4 (NR_IRQS_LEGACY + 17) +#define MX2x_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX2x_INT_UART2 (NR_IRQS_LEGACY + 19) +#define MX2x_INT_UART1 (NR_IRQS_LEGACY + 20) +#define MX2x_INT_KPP (NR_IRQS_LEGACY + 21) +#define MX2x_INT_RTC (NR_IRQS_LEGACY + 22) +#define MX2x_INT_PWM (NR_IRQS_LEGACY + 23) +#define MX2x_INT_GPT3 (NR_IRQS_LEGACY + 24) +#define MX2x_INT_GPT2 (NR_IRQS_LEGACY + 25) +#define MX2x_INT_GPT1 (NR_IRQS_LEGACY + 26) +#define MX2x_INT_WDOG (NR_IRQS_LEGACY + 27) +#define MX2x_INT_PCMCIA (NR_IRQS_LEGACY + 28) +#define MX2x_INT_NANDFC (NR_IRQS_LEGACY + 29) +#define MX2x_INT_CSI (NR_IRQS_LEGACY + 31) +#define MX2x_INT_DMACH0 (NR_IRQS_LEGACY + 32) +#define MX2x_INT_DMACH1 (NR_IRQS_LEGACY + 33) +#define MX2x_INT_DMACH2 (NR_IRQS_LEGACY + 34) +#define MX2x_INT_DMACH3 (NR_IRQS_LEGACY + 35) +#define MX2x_INT_DMACH4 (NR_IRQS_LEGACY + 36) +#define MX2x_INT_DMACH5 (NR_IRQS_LEGACY + 37) +#define MX2x_INT_DMACH6 (NR_IRQS_LEGACY + 38) +#define MX2x_INT_DMACH7 (NR_IRQS_LEGACY + 39) +#define MX2x_INT_DMACH8 (NR_IRQS_LEGACY + 40) +#define MX2x_INT_DMACH9 (NR_IRQS_LEGACY + 41) +#define MX2x_INT_DMACH10 (NR_IRQS_LEGACY + 42) +#define MX2x_INT_DMACH11 (NR_IRQS_LEGACY + 43) +#define MX2x_INT_DMACH12 (NR_IRQS_LEGACY + 44) +#define MX2x_INT_DMACH13 (NR_IRQS_LEGACY + 45) +#define MX2x_INT_DMACH14 (NR_IRQS_LEGACY + 46) +#define MX2x_INT_DMACH15 (NR_IRQS_LEGACY + 47) +#define MX2x_INT_EMMAPRP (NR_IRQS_LEGACY + 51) +#define MX2x_INT_EMMAPP (NR_IRQS_LEGACY + 52) +#define MX2x_INT_SLCDC (NR_IRQS_LEGACY + 60) +#define MX2x_INT_LCDC (NR_IRQS_LEGACY + 61) + +/* fixed DMA request numbers */ +#define MX2x_DMA_REQ_CSPI3_RX 1 +#define MX2x_DMA_REQ_CSPI3_TX 2 +#define MX2x_DMA_REQ_EXT 3 +#define MX2x_DMA_REQ_SDHC2 6 +#define MX2x_DMA_REQ_SDHC1 7 +#define MX2x_DMA_REQ_SSI2_RX0 8 +#define MX2x_DMA_REQ_SSI2_TX0 9 +#define MX2x_DMA_REQ_SSI2_RX1 10 +#define MX2x_DMA_REQ_SSI2_TX1 11 +#define MX2x_DMA_REQ_SSI1_RX0 12 +#define MX2x_DMA_REQ_SSI1_TX0 13 +#define MX2x_DMA_REQ_SSI1_RX1 14 +#define MX2x_DMA_REQ_SSI1_TX1 15 +#define MX2x_DMA_REQ_CSPI2_RX 16 +#define MX2x_DMA_REQ_CSPI2_TX 17 +#define MX2x_DMA_REQ_CSPI1_RX 18 +#define MX2x_DMA_REQ_CSPI1_TX 19 +#define MX2x_DMA_REQ_UART4_RX 20 +#define MX2x_DMA_REQ_UART4_TX 21 +#define MX2x_DMA_REQ_UART3_RX 22 +#define MX2x_DMA_REQ_UART3_TX 23 +#define MX2x_DMA_REQ_UART2_RX 24 +#define MX2x_DMA_REQ_UART2_TX 25 +#define MX2x_DMA_REQ_UART1_RX 26 +#define MX2x_DMA_REQ_UART1_TX 27 +#define MX2x_DMA_REQ_CSI_STAT 30 +#define MX2x_DMA_REQ_CSI_RX 31 + +#endif /* ifndef __MACH_MX2x_H__ */ diff --git a/arch/arm/mach-imx/mx31.h b/arch/arm/mach-imx/mx31.h new file mode 100644 index 000000000..d9574671c --- /dev/null +++ b/arch/arm/mach-imx/mx31.h @@ -0,0 +1,197 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __MACH_MX31_H__ +#define __MACH_MX31_H__ + +/* + * IRAM + */ +#define MX31_IRAM_BASE_ADDR 0x1ffc0000 /* internal ram */ +#define MX31_IRAM_SIZE SZ_16K + +#define MX31_L2CC_BASE_ADDR 0x30000000 +#define MX31_L2CC_SIZE SZ_1M + +#define MX31_AIPS1_BASE_ADDR 0x43f00000 +#define MX31_AIPS1_SIZE SZ_1M +#define MX31_MAX_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x04000) +#define MX31_EVTMON_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x08000) +#define MX31_CLKCTL_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x0c000) +#define MX31_ETB_SLOT4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x10000) +#define MX31_ETB_SLOT5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x14000) +#define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000) +#define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000) +#define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000) +#define MX31_USB_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000) +#define MX31_USB_OTG_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0000) +#define MX31_USB_HS1_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0200) +#define MX31_USB_HS2_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0400) +#define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000) +#define MX31_UART1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x90000) +#define MX31_UART2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x94000) +#define MX31_I2C2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x98000) +#define MX31_OWIRE_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x9c000) +#define MX31_SSI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa0000) +#define MX31_CSPI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa4000) +#define MX31_KPP_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa8000) +#define MX31_IOMUXC_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xac000) +#define MX31_UART4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb0000) +#define MX31_UART5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb4000) +#define MX31_ECT_IP1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb8000) +#define MX31_ECT_IP2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xbc000) + +#define MX31_SPBA0_BASE_ADDR 0x50000000 +#define MX31_SPBA0_SIZE SZ_1M +#define MX31_SDHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x04000) +#define MX31_SDHC2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x08000) +#define MX31_UART3_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x0c000) +#define MX31_CSPI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x10000) +#define MX31_SSI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x14000) +#define MX31_SIM1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x18000) +#define MX31_IIM_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x1c000) +#define MX31_ATA_DMA_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x20000) +#define MX31_MSHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x24000) +#define MX31_SPBA_CTRL_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x3c000) + +#define MX31_AIPS2_BASE_ADDR 0x53f00000 +#define MX31_AIPS2_SIZE SZ_1M +#define MX31_CCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x80000) +#define MX31_CSPI3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x84000) +#define MX31_FIRI_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x8c000) +#define MX31_GPT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x90000) +#define MX31_EPIT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x94000) +#define MX31_EPIT2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x98000) +#define MX31_GPIO3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xa4000) +#define MX31_SCC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xac000) +#define MX31_SCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xae000) +#define MX31_SMN_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xaf000) +#define MX31_RNGA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xb0000) +#define MX31_IPU_CTRL_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc0000) +#define MX31_AUDMUX_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc4000) +#define MX31_MPEG4_ENC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc8000) +#define MX31_GPIO1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xcc000) +#define MX31_GPIO2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd0000) +#define MX31_SDMA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd4000) +#define MX31_RTC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd8000) +#define MX31_WDOG_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xdc000) +#define MX31_PWM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xe0000) +#define MX31_RTIC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xec000) + +#define MX31_ROMP_BASE_ADDR 0x60000000 +#define MX31_ROMP_BASE_ADDR_VIRT IOMEM(0xfc500000) +#define MX31_ROMP_SIZE SZ_1M + +#define MX31_AVIC_BASE_ADDR 0x68000000 +#define MX31_AVIC_SIZE SZ_1M + +#define MX31_IPU_MEM_BASE_ADDR 0x70000000 +#define MX31_CSD0_BASE_ADDR 0x80000000 +#define MX31_CSD1_BASE_ADDR 0x90000000 + +#define MX31_CS0_BASE_ADDR 0xa0000000 +#define MX31_CS1_BASE_ADDR 0xa8000000 +#define MX31_CS2_BASE_ADDR 0xb0000000 +#define MX31_CS3_BASE_ADDR 0xb2000000 + +#define MX31_CS4_BASE_ADDR 0xb4000000 +#define MX31_CS4_BASE_ADDR_VIRT IOMEM(0xf6000000) +#define MX31_CS4_SIZE SZ_32M + +#define MX31_CS5_BASE_ADDR 0xb6000000 +#define MX31_CS5_BASE_ADDR_VIRT IOMEM(0xf8000000) +#define MX31_CS5_SIZE SZ_32M + +#define MX31_X_MEMC_BASE_ADDR 0xb8000000 +#define MX31_X_MEMC_SIZE SZ_64K +#define MX31_NFC_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x0000) +#define MX31_ESDCTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x1000) +#define MX31_WEIM_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x2000) +#define MX31_M3IF_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x3000) +#define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000) +#define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR + +#define MX31_WEIM_CSCRx_BASE_ADDR(cs) (MX31_WEIM_BASE_ADDR + (cs) * 0x10) +#define MX31_WEIM_CSCRxU(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs)) +#define MX31_WEIM_CSCRxL(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4) +#define MX31_WEIM_CSCRxA(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8) + +#define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000 + +#define MX31_IO_P2V(x) IMX_IO_P2V(x) +#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x)) + +/* + * Interrupt numbers + */ +#include <asm/irq.h> +#define MX31_INT_I2C3 (NR_IRQS_LEGACY + 3) +#define MX31_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX31_INT_MPEG4_ENCODER (NR_IRQS_LEGACY + 5) +#define MX31_INT_RTIC (NR_IRQS_LEGACY + 6) +#define MX31_INT_FIRI (NR_IRQS_LEGACY + 7) +#define MX31_INT_SDHC2 (NR_IRQS_LEGACY + 8) +#define MX31_INT_SDHC1 (NR_IRQS_LEGACY + 9) +#define MX31_INT_I2C1 (NR_IRQS_LEGACY + 10) +#define MX31_INT_SSI2 (NR_IRQS_LEGACY + 11) +#define MX31_INT_SSI1 (NR_IRQS_LEGACY + 12) +#define MX31_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX31_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX31_INT_ATA (NR_IRQS_LEGACY + 15) +#define MX31_INT_MBX (NR_IRQS_LEGACY + 16) +#define MX31_INT_CSPI3 (NR_IRQS_LEGACY + 17) +#define MX31_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX31_INT_IIM (NR_IRQS_LEGACY + 19) +#define MX31_INT_SIM2 (NR_IRQS_LEGACY + 20) +#define MX31_INT_SIM1 (NR_IRQS_LEGACY + 21) +#define MX31_INT_RNGA (NR_IRQS_LEGACY + 22) +#define MX31_INT_EVTMON (NR_IRQS_LEGACY + 23) +#define MX31_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX31_INT_RTC (NR_IRQS_LEGACY + 25) +#define MX31_INT_PWM (NR_IRQS_LEGACY + 26) +#define MX31_INT_EPIT2 (NR_IRQS_LEGACY + 27) +#define MX31_INT_EPIT1 (NR_IRQS_LEGACY + 28) +#define MX31_INT_GPT (NR_IRQS_LEGACY + 29) +#define MX31_INT_POWER_FAIL (NR_IRQS_LEGACY + 30) +#define MX31_INT_CCM_DVFS (NR_IRQS_LEGACY + 31) +#define MX31_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX31_INT_NFC (NR_IRQS_LEGACY + 33) +#define MX31_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX31_INT_USB_HS1 (NR_IRQS_LEGACY + 35) +#define MX31_INT_USB_HS2 (NR_IRQS_LEGACY + 36) +#define MX31_INT_USB_OTG (NR_IRQS_LEGACY + 37) +#define MX31_INT_MSHC1 (NR_IRQS_LEGACY + 39) +#define MX31_INT_MSHC2 (NR_IRQS_LEGACY + 40) +#define MX31_INT_IPU_ERR (NR_IRQS_LEGACY + 41) +#define MX31_INT_IPU_SYN (NR_IRQS_LEGACY + 42) +#define MX31_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX31_INT_UART4 (NR_IRQS_LEGACY + 46) +#define MX31_INT_UART5 (NR_IRQS_LEGACY + 47) +#define MX31_INT_ECT (NR_IRQS_LEGACY + 48) +#define MX31_INT_SCC_SCM (NR_IRQS_LEGACY + 49) +#define MX31_INT_SCC_SMN (NR_IRQS_LEGACY + 50) +#define MX31_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX31_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX31_INT_CCM (NR_IRQS_LEGACY + 53) +#define MX31_INT_PCMCIA (NR_IRQS_LEGACY + 54) +#define MX31_INT_WDOG (NR_IRQS_LEGACY + 55) +#define MX31_INT_GPIO3 (NR_IRQS_LEGACY + 56) +#define MX31_INT_EXT_POWER (NR_IRQS_LEGACY + 58) +#define MX31_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59) +#define MX31_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60) +#define MX31_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61) +#define MX31_INT_EXT_WDOG (NR_IRQS_LEGACY + 62) +#define MX31_INT_EXT_TV (NR_IRQS_LEGACY + 63) + +#define MX31_DMA_REQ_SDHC1 20 +#define MX31_DMA_REQ_SDHC2 21 +#define MX31_DMA_REQ_SSI2_RX1 22 +#define MX31_DMA_REQ_SSI2_TX1 23 +#define MX31_DMA_REQ_SSI2_RX0 24 +#define MX31_DMA_REQ_SSI2_TX0 25 +#define MX31_DMA_REQ_SSI1_RX1 26 +#define MX31_DMA_REQ_SSI1_TX1 27 +#define MX31_DMA_REQ_SSI1_RX0 28 +#define MX31_DMA_REQ_SSI1_TX0 29 + +#define MX31_PROD_SIGNATURE 0x1 /* For MX31 */ + +#endif /* ifndef __MACH_MX31_H__ */ diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c new file mode 100644 index 000000000..231f900a1 --- /dev/null +++ b/arch/arm/mach-imx/mx31lilly-db.c @@ -0,0 +1,191 @@ +/* + * LILLY-1131 development board support + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * based on code for other MX31 boards, + * + * Copyright 2005-2007 Freescale Semiconductor + * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "board-mx31lilly.h" +#include "common.h" +#include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" + +/* + * This file contains board-specific initialization routines for the + * LILLY-1131 development board. If you design an own baseboard for the + * module, use this file as base for support code. + */ + +static unsigned int lilly_db_board_pins[] __initdata = { + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_DRDY0__DRDY0, + MX31_PIN_CONTRAST__CONTRAST, +}; + +/* MMC support */ + +static int mxc_mmc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0)); +} + +static int gpio_det, gpio_wp; + +#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int mxc_mmc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + + gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1); + gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0); + + mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG); + + ret = gpio_request(gpio_det, "MMC detect"); + if (ret) + return ret; + + ret = gpio_request(gpio_wp, "MMC w/p"); + if (ret) + goto exit_free_det; + + gpio_direction_input(gpio_det); + gpio_direction_input(gpio_wp); + + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), + detect_irq, IRQF_TRIGGER_FALLING, + "MMC detect", data); + if (ret) + goto exit_free_wp; + + return 0; + +exit_free_wp: + gpio_free(gpio_wp); + +exit_free_det: + gpio_free(gpio_det); + + return ret; +} + +static void mxc_mmc1_exit(struct device *dev, void *data) +{ + gpio_free(gpio_det); + gpio_free(gpio_wp); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), data); +} + +static const struct imxmmc_platform_data mmc_pdata __initconst = { + .get_ro = mxc_mmc1_get_ro, + .init = mxc_mmc1_init, + .exit = mxc_mmc1_exit, +}; + +/* Framebuffer support */ +static const struct fb_videomode fb_modedb = { + /* 640x480 TFT panel (IPS-056T) */ + .name = "CRT-VGA", + .refresh = 64, + .xres = 640, + .yres = 480, + .pixclock = 30000, + .left_margin = 200, + .right_margin = 2, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 3, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, +}; + +static struct mx3fb_platform_data fb_pdata __initdata = { + .name = "CRT-VGA", + .mode = &fb_modedb, + .num_modes = 1, +}; + +#define LCD_VCC_EN_GPIO (7) + +static void __init mx31lilly_init_fb(void) +{ + if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) { + printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n"); + return; + } + + imx31_add_ipu_core(); + imx31_add_mx3_sdc_fb(&fb_pdata); + gpio_direction_output(LCD_VCC_EN_GPIO, 1); +} + +void __init mx31lilly_db_init(void) +{ + mxc_iomux_setup_multiple_pins(lilly_db_board_pins, + ARRAY_SIZE(lilly_db_board_pins), + "development board pins"); + imx31_add_mxc_mmc(0, &mmc_pdata); + mx31lilly_init_fb(); +} diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c new file mode 100644 index 000000000..c66a006bf --- /dev/null +++ b/arch/arm/mach-imx/mx31lite-db.c @@ -0,0 +1,163 @@ +/* + * LogicPD i.MX31 SOM-LV development board support + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * based on code for other MX31 boards, + * + * Copyright 2005-2007 Freescale Semiconductor + * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "board-mx31lite.h" +#include "common.h" +#include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" + +/* + * This file contains board-specific initialization routines for the + * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'. + * If you design an own baseboard for the module, use this file as base + * for support code. + */ + +static unsigned int litekit_db_board_pins[] __initdata = { + /* SDHC1 */ + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, +}; + +/* MMC */ + +static int gpio_det, gpio_wp; + +#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS) + +static int mxc_mmc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6)); +} + +static int mxc_mmc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + + gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1); + gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6); + + mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_SD1_CMD, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG); + + ret = gpio_request(gpio_det, "MMC detect"); + if (ret) + return ret; + + ret = gpio_request(gpio_wp, "MMC w/p"); + if (ret) + goto exit_free_det; + + gpio_direction_input(gpio_det); + gpio_direction_input(gpio_wp); + + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), + detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "MMC detect", data); + if (ret) + goto exit_free_wp; + + return 0; + +exit_free_wp: + gpio_free(gpio_wp); + +exit_free_det: + gpio_free(gpio_det); + + return ret; +} + +static void mxc_mmc1_exit(struct device *dev, void *data) +{ + gpio_free(gpio_det); + gpio_free(gpio_wp); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), data); +} + +static const struct imxmmc_platform_data mmc_pdata __initconst = { + .get_ro = mxc_mmc1_get_ro, + .init = mxc_mmc1_init, + .exit = mxc_mmc1_exit, +}; + +/* GPIO LEDs */ + +static const struct gpio_led litekit_leds[] __initconst = { + { + .name = "GPIO0", + .gpio = IOMUX_TO_GPIO(MX31_PIN_COMPARE), + .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "GPIO1", + .gpio = IOMUX_TO_GPIO(MX31_PIN_CAPTURE), + .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + } +}; + +static const struct gpio_led_platform_data + litekit_led_platform_data __initconst = { + .leds = litekit_leds, + .num_leds = ARRAY_SIZE(litekit_leds), +}; + +void __init mx31lite_db_init(void) +{ + mxc_iomux_setup_multiple_pins(litekit_db_board_pins, + ARRAY_SIZE(litekit_db_board_pins), + "development board pins"); + imx31_add_mxc_mmc(0, &mmc_pdata); + gpio_led_register_device(-1, &litekit_led_platform_data); + imx31_add_imx2_wdt(); + imx31_add_mxc_rtc(); +} diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c new file mode 100644 index 000000000..3c224f41e --- /dev/null +++ b/arch/arm/mach-imx/mx31moboard-devboard.c @@ -0,0 +1,247 @@ +/* + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/types.h> + +#include <linux/usb/otg.h> + +#include "board-mx31moboard.h" +#include "common.h" +#include "devices-imx31.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" + +static unsigned int devboard_pins[] = { + /* UART1 */ + MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, + /* SDHC2 */ + MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, + MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, + MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, + MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, + /* USB H1 */ + MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM, + MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP, + MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB, + MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND, + MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12, + /* SEL */ + MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, + MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, +}; + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) +#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) + +static int devboard_sdhc2_get_ro(struct device *dev) +{ + return !gpio_get_value(SDHC2_WP); +} + +static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC2_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC2_CD); + + ret = gpio_request(SDHC2_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC2_WP); + + ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc2-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC2_WP); +err_gpio_free: + gpio_free(SDHC2_CD); + + return ret; +} + +static void devboard_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC2_CD), data); + gpio_free(SDHC2_WP); + gpio_free(SDHC2_CD); +} + +static const struct imxmmc_platform_data sdhc2_pdata __initconst = { + .get_ro = devboard_sdhc2_get_ro, + .init = devboard_sdhc2_init, + .exit = devboard_sdhc2_exit, +}; + +#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) +#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) +#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) +#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) + +static void devboard_init_sel_gpios(void) +{ + if (!gpio_request(SEL0, "sel0")) { + gpio_direction_input(SEL0); + gpio_export(SEL0, true); + } + + if (!gpio_request(SEL1, "sel1")) { + gpio_direction_input(SEL1); + gpio_export(SEL1, true); + } + + if (!gpio_request(SEL2, "sel2")) { + gpio_direction_input(SEL2); + gpio_export(SEL2, true); + } + + if (!gpio_request(SEL3, "sel3")) { + gpio_direction_input(SEL3); + gpio_export(SEL3, true); + } +} +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int devboard_usbh1_hw_init(struct platform_device *pdev) +{ + mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); + + mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG); + + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_SINGLE_UNI); +} + +#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) +#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE) + +static int devboard_isp1105_init(struct usb_phy *otg) +{ + int ret = gpio_request(USBH1_MODE, "usbh1-mode"); + if (ret) + return ret; + /* single ended */ + gpio_direction_output(USBH1_MODE, 0); + + ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen"); + if (ret) { + gpio_free(USBH1_MODE); + return ret; + } + gpio_direction_output(USBH1_VBUSEN_B, 1); + + return 0; +} + + +static int devboard_isp1105_set_vbus(struct usb_otg *otg, bool on) +{ + if (on) + gpio_set_value(USBH1_VBUSEN_B, 0); + else + gpio_set_value(USBH1_VBUSEN_B, 1); + + return 0; +} + +static struct mxc_usbh_platform_data usbh1_pdata __initdata = { + .init = devboard_usbh1_hw_init, + .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, +}; + +static int __init devboard_usbh1_init(void) +{ + struct usb_phy *phy; + struct platform_device *pdev; + + phy = kzalloc(sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); + if (!phy->otg) { + kfree(phy); + return -ENOMEM; + } + + phy->label = "ISP1105"; + phy->init = devboard_isp1105_init; + phy->otg->set_vbus = devboard_isp1105_set_vbus; + + usbh1_pdata.otg = phy; + + pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata); + + return PTR_ERR_OR_ZERO(pdev); +} + + +static const struct fsl_usb2_platform_data usb_pdata __initconst = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +/* + * system init for baseboard usage. Will be called by mx31moboard init. + */ +void __init mx31moboard_devboard_init(void) +{ + printk(KERN_INFO "Initializing mx31devboard peripherals\n"); + + mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins), + "devboard"); + + imx31_add_imx_uart1(&uart_pdata); + + imx31_add_mxc_mmc(1, &sdhc2_pdata); + + devboard_init_sel_gpios(); + + imx31_add_fsl_usb2_udc(&usb_pdata); + + devboard_usbh1_init(); +} diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c new file mode 100644 index 000000000..9a5a869be --- /dev/null +++ b/arch/arm/mach-imx/mx31moboard-marxbot.c @@ -0,0 +1,279 @@ +/* + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/spi/spi.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/types.h> + +#include <linux/usb/otg.h> + +#include "board-mx31moboard.h" +#include "common.h" +#include "devices-imx31.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" + +static unsigned int marxbot_pins[] = { + /* SDHC2 */ + MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, + MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, + MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, + MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, + /* dsPIC resets */ + MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22, + /*battery detection */ + MX31_PIN_LCS0__GPIO3_23, + /* USB H1 */ + MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM, + MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP, + MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB, + MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND, + MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12, + /* SEL */ + MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, + MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, +}; + +#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) +#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) + +static int marxbot_sdhc2_get_ro(struct device *dev) +{ + return !gpio_get_value(SDHC2_WP); +} + +static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC2_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC2_CD); + + ret = gpio_request(SDHC2_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC2_WP); + + ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc2-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC2_WP); +err_gpio_free: + gpio_free(SDHC2_CD); + + return ret; +} + +static void marxbot_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC2_CD), data); + gpio_free(SDHC2_WP); + gpio_free(SDHC2_CD); +} + +static const struct imxmmc_platform_data sdhc2_pdata __initconst = { + .get_ro = marxbot_sdhc2_get_ro, + .init = marxbot_sdhc2_init, + .exit = marxbot_sdhc2_exit, +}; + +#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_STXD5) +#define DSPICS_RST_B IOMUX_TO_GPIO(MX31_PIN_SRXD5) + +static void dspics_resets_init(void) +{ + if (!gpio_request(TRSLAT_RST_B, "translator-rst")) { + gpio_direction_output(TRSLAT_RST_B, 0); + gpio_export(TRSLAT_RST_B, false); + } + + if (!gpio_request(DSPICS_RST_B, "dspics-rst")) { + gpio_direction_output(DSPICS_RST_B, 0); + gpio_export(DSPICS_RST_B, false); + } +} + +static struct spi_board_info marxbot_spi_board_info[] __initdata = { + { + .modalias = "spidev", + .max_speed_hz = 300000, + .bus_num = 1, + .chip_select = 1, /* according spi1_cs[] ! */ + }, +}; + +#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) +#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) +#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) +#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) + +static void marxbot_init_sel_gpios(void) +{ + if (!gpio_request(SEL0, "sel0")) { + gpio_direction_input(SEL0); + gpio_export(SEL0, true); + } + + if (!gpio_request(SEL1, "sel1")) { + gpio_direction_input(SEL1); + gpio_export(SEL1, true); + } + + if (!gpio_request(SEL2, "sel2")) { + gpio_direction_input(SEL2); + gpio_export(SEL2, true); + } + + if (!gpio_request(SEL3, "sel3")) { + gpio_direction_input(SEL3); + gpio_export(SEL3, true); + } +} + +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int marxbot_usbh1_hw_init(struct platform_device *pdev) +{ + mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); + + mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG); + + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_SINGLE_UNI); +} + +#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) +#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE) + +static int marxbot_isp1105_init(struct usb_phy *otg) +{ + int ret = gpio_request(USBH1_MODE, "usbh1-mode"); + if (ret) + return ret; + /* single ended */ + gpio_direction_output(USBH1_MODE, 0); + + ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen"); + if (ret) { + gpio_free(USBH1_MODE); + return ret; + } + gpio_direction_output(USBH1_VBUSEN_B, 1); + + return 0; +} + + +static int marxbot_isp1105_set_vbus(struct usb_otg *otg, bool on) +{ + if (on) + gpio_set_value(USBH1_VBUSEN_B, 0); + else + gpio_set_value(USBH1_VBUSEN_B, 1); + + return 0; +} + +static struct mxc_usbh_platform_data usbh1_pdata __initdata = { + .init = marxbot_usbh1_hw_init, + .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, +}; + +static int __init marxbot_usbh1_init(void) +{ + struct usb_phy *phy; + struct platform_device *pdev; + + phy = kzalloc(sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); + if (!phy->otg) { + kfree(phy); + return -ENOMEM; + } + + phy->label = "ISP1105"; + phy->init = marxbot_isp1105_init; + phy->otg->set_vbus = marxbot_isp1105_set_vbus; + + usbh1_pdata.otg = phy; + + pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata); + + return PTR_ERR_OR_ZERO(pdev); +} + +static const struct fsl_usb2_platform_data usb_pdata __initconst = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +/* + * system init for baseboard usage. Will be called by mx31moboard init. + */ +void __init mx31moboard_marxbot_init(void) +{ + printk(KERN_INFO "Initializing mx31marxbot peripherals\n"); + + mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins), + "marxbot"); + + marxbot_init_sel_gpios(); + + dspics_resets_init(); + + imx31_add_mxc_mmc(1, &sdhc2_pdata); + + spi_register_board_info(marxbot_spi_board_info, + ARRAY_SIZE(marxbot_spi_board_info)); + + /* battery present pin */ + gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present"); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0)); + gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false); + + imx31_add_fsl_usb2_udc(&usb_pdata); + + marxbot_usbh1_init(); +} diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c new file mode 100644 index 000000000..5cdd7abce --- /dev/null +++ b/arch/arm/mach-imx/mx31moboard-smartbot.c @@ -0,0 +1,133 @@ +/* + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/types.h> + +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> + +#include "board-mx31moboard.h" +#include "common.h" +#include "devices-imx31.h" +#include "ehci.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" + +static unsigned int smartbot_pins[] = { + /* UART1 */ + MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, + /* ENABLES */ + MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, + MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, +}; + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static const struct fsl_usb2_platform_data usb_pdata __initconst = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +#if defined(CONFIG_USB_ULPI) + +static int smartbot_otg_init(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} + +static struct mxc_usbh_platform_data otg_host_pdata __initdata = { + .init = smartbot_otg_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, +}; + +static int __init smartbot_otg_host_init(void) +{ + struct platform_device *pdev; + + otg_host_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (!otg_host_pdata.otg) + return -ENODEV; + + pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata); + + return PTR_ERR_OR_ZERO(pdev); +} +#else +static inline int smartbot_otg_host_init(void) { return 0; } +#endif + +#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) +#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) +#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) +#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) + +static void smartbot_resets_init(void) +{ + if (!gpio_request(POWER_EN, "power-enable")) { + gpio_direction_output(POWER_EN, 0); + gpio_export(POWER_EN, false); + } + + if (!gpio_request(DSPIC_RST_B, "dspic-rst")) { + gpio_direction_output(DSPIC_RST_B, 0); + gpio_export(DSPIC_RST_B, false); + } + + if (!gpio_request(TRSLAT_RST_B, "translator-rst")) { + gpio_direction_output(TRSLAT_RST_B, 0); + gpio_export(TRSLAT_RST_B, false); + } + + if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) { + gpio_direction_output(TRSLAT_SRC_CHOICE, 0); + gpio_export(TRSLAT_SRC_CHOICE, false); + } +} +/* + * system init for baseboard usage. Will be called by mx31moboard init. + */ +void __init mx31moboard_smartbot_init(int board) +{ + printk(KERN_INFO "Initializing mx31smartbot peripherals\n"); + + mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins), + "smartbot"); + + imx31_add_imx_uart1(&uart_pdata); + + switch (board) { + case MX31SMARTBOT: + imx31_add_fsl_usb2_udc(&usb_pdata); + break; + case MX31EYEBOT: + smartbot_otg_host_init(); + break; + default: + printk(KERN_WARNING "Unknown board %d, USB OTG not initialized", + board); + } + + smartbot_resets_init(); +} diff --git a/arch/arm/mach-imx/mx35.h b/arch/arm/mach-imx/mx35.h new file mode 100644 index 000000000..760de6a0a --- /dev/null +++ b/arch/arm/mach-imx/mx35.h @@ -0,0 +1,191 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __MACH_MX35_H__ +#define __MACH_MX35_H__ + +/* + * IRAM + */ +#define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */ +#define MX35_IRAM_SIZE SZ_128K + +#define MX35_L2CC_BASE_ADDR 0x30000000 +#define MX35_L2CC_SIZE SZ_1M + +#define MX35_AIPS1_BASE_ADDR 0x43f00000 +#define MX35_AIPS1_SIZE SZ_1M +#define MX35_MAX_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x04000) +#define MX35_EVTMON_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x08000) +#define MX35_CLKCTL_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x0c000) +#define MX35_ETB_SLOT4_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x10000) +#define MX35_ETB_SLOT5_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x14000) +#define MX35_ECT_CTIO_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x18000) +#define MX35_I2C1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000) +#define MX35_I2C3_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x84000) +#define MX35_UART1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x90000) +#define MX35_UART2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x94000) +#define MX35_I2C2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x98000) +#define MX35_OWIRE_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x9c000) +#define MX35_SSI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa0000) +#define MX35_CSPI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa4000) +#define MX35_KPP_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa8000) +#define MX35_IOMUXC_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xac000) +#define MX35_ECT_IP1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xb8000) +#define MX35_ECT_IP2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xbc000) + +#define MX35_SPBA0_BASE_ADDR 0x50000000 +#define MX35_SPBA0_SIZE SZ_1M +#define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000) +#define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000) +#define MX35_SSI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x14000) +#define MX35_ATA_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x20000) +#define MX35_MSHC1_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x24000) +#define MX35_FEC_BASE_ADDR 0x50038000 +#define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000) + +#define MX35_AIPS2_BASE_ADDR 0x53f00000 +#define MX35_AIPS2_SIZE SZ_1M +#define MX35_CCM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x80000) +#define MX35_GPT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x90000) +#define MX35_EPIT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x94000) +#define MX35_EPIT2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x98000) +#define MX35_GPIO3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xa4000) +#define MX35_SCC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xac000) +#define MX35_RNGA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb0000) +#define MX35_ESDHC1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb4000) +#define MX35_ESDHC2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb8000) +#define MX35_ESDHC3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xbc000) +#define MX35_IPU_CTRL_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc0000) +#define MX35_AUDMUX_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc4000) +#define MX35_GPIO1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xcc000) +#define MX35_GPIO2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd0000) +#define MX35_SDMA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd4000) +#define MX35_RTC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd8000) +#define MX35_WDOG_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xdc000) +#define MX35_PWM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe0000) +#define MX35_CAN1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe4000) +#define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000) +#define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000) +#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000) +#define MX35_USB_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf4000) +#define MX35_USB_OTG_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0000) +/* + * The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for + * HS. When host support was implemented only a preliminary document was + * available, which told 0x400. This works fine. + */ +#define MX35_USB_HS_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0400) + +#define MX35_ROMP_BASE_ADDR 0x60000000 +#define MX35_ROMP_SIZE SZ_1M + +#define MX35_AVIC_BASE_ADDR 0x68000000 +#define MX35_AVIC_SIZE SZ_1M + +/* + * Memory regions and CS + */ +#define MX35_IPU_MEM_BASE_ADDR 0x70000000 +#define MX35_CSD0_BASE_ADDR 0x80000000 +#define MX35_CSD1_BASE_ADDR 0x90000000 + +#define MX35_CS0_BASE_ADDR 0xa0000000 +#define MX35_CS1_BASE_ADDR 0xa8000000 +#define MX35_CS2_BASE_ADDR 0xb0000000 +#define MX35_CS3_BASE_ADDR 0xb2000000 + +#define MX35_CS4_BASE_ADDR 0xb4000000 +#define MX35_CS4_BASE_ADDR_VIRT 0xf6000000 +#define MX35_CS4_SIZE SZ_32M + +#define MX35_CS5_BASE_ADDR 0xb6000000 +#define MX35_CS5_BASE_ADDR_VIRT 0xf8000000 +#define MX35_CS5_SIZE SZ_32M + +/* + * NAND, SDRAM, WEIM, M3IF, EMI controllers + */ +#define MX35_X_MEMC_BASE_ADDR 0xb8000000 +#define MX35_X_MEMC_SIZE SZ_64K +#define MX35_ESDCTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x1000) +#define MX35_WEIM_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x2000) +#define MX35_M3IF_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x3000) +#define MX35_EMI_CTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x4000) +#define MX35_PCMCIA_CTL_BASE_ADDR MX35_EMI_CTL_BASE_ADDR + +#define MX35_NFC_BASE_ADDR 0xbb000000 +#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000 + +#define MX35_IO_P2V(x) IMX_IO_P2V(x) +#define MX35_IO_ADDRESS(x) IOMEM(MX35_IO_P2V(x)) + +/* + * Interrupt numbers + */ +#include <asm/irq.h> +#define MX35_INT_OWIRE (NR_IRQS_LEGACY + 2) +#define MX35_INT_I2C3 (NR_IRQS_LEGACY + 3) +#define MX35_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX35_INT_RTIC (NR_IRQS_LEGACY + 6) +#define MX35_INT_ESDHC1 (NR_IRQS_LEGACY + 7) +#define MX35_INT_ESDHC2 (NR_IRQS_LEGACY + 8) +#define MX35_INT_ESDHC3 (NR_IRQS_LEGACY + 9) +#define MX35_INT_I2C1 (NR_IRQS_LEGACY + 10) +#define MX35_INT_SSI1 (NR_IRQS_LEGACY + 11) +#define MX35_INT_SSI2 (NR_IRQS_LEGACY + 12) +#define MX35_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX35_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX35_INT_ATA (NR_IRQS_LEGACY + 15) +#define MX35_INT_GPU2D (NR_IRQS_LEGACY + 16) +#define MX35_INT_ASRC (NR_IRQS_LEGACY + 17) +#define MX35_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX35_INT_IIM (NR_IRQS_LEGACY + 19) +#define MX35_INT_RNGA (NR_IRQS_LEGACY + 22) +#define MX35_INT_EVTMON (NR_IRQS_LEGACY + 23) +#define MX35_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX35_INT_RTC (NR_IRQS_LEGACY + 25) +#define MX35_INT_PWM (NR_IRQS_LEGACY + 26) +#define MX35_INT_EPIT2 (NR_IRQS_LEGACY + 27) +#define MX35_INT_EPIT1 (NR_IRQS_LEGACY + 28) +#define MX35_INT_GPT (NR_IRQS_LEGACY + 29) +#define MX35_INT_POWER_FAIL (NR_IRQS_LEGACY + 30) +#define MX35_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX35_INT_NFC (NR_IRQS_LEGACY + 33) +#define MX35_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX35_INT_USB_HS (NR_IRQS_LEGACY + 35) +#define MX35_INT_USB_OTG (NR_IRQS_LEGACY + 37) +#define MX35_INT_MSHC1 (NR_IRQS_LEGACY + 39) +#define MX35_INT_ESAI (NR_IRQS_LEGACY + 40) +#define MX35_INT_IPU_ERR (NR_IRQS_LEGACY + 41) +#define MX35_INT_IPU_SYN (NR_IRQS_LEGACY + 42) +#define MX35_INT_CAN1 (NR_IRQS_LEGACY + 43) +#define MX35_INT_CAN2 (NR_IRQS_LEGACY + 44) +#define MX35_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX35_INT_MLB (NR_IRQS_LEGACY + 46) +#define MX35_INT_SPDIF (NR_IRQS_LEGACY + 47) +#define MX35_INT_ECT (NR_IRQS_LEGACY + 48) +#define MX35_INT_SCC_SCM (NR_IRQS_LEGACY + 49) +#define MX35_INT_SCC_SMN (NR_IRQS_LEGACY + 50) +#define MX35_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX35_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX35_INT_WDOG (NR_IRQS_LEGACY + 55) +#define MX35_INT_GPIO3 (NR_IRQS_LEGACY + 56) +#define MX35_INT_FEC (NR_IRQS_LEGACY + 57) +#define MX35_INT_EXT_POWER (NR_IRQS_LEGACY + 58) +#define MX35_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59) +#define MX35_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60) +#define MX35_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61) +#define MX35_INT_EXT_WDOG (NR_IRQS_LEGACY + 62) +#define MX35_INT_EXT_TV (NR_IRQS_LEGACY + 63) + +#define MX35_DMA_REQ_SSI2_RX1 22 +#define MX35_DMA_REQ_SSI2_TX1 23 +#define MX35_DMA_REQ_SSI2_RX0 24 +#define MX35_DMA_REQ_SSI2_TX0 25 +#define MX35_DMA_REQ_SSI1_RX1 26 +#define MX35_DMA_REQ_SSI1_TX1 27 +#define MX35_DMA_REQ_SSI1_RX0 28 +#define MX35_DMA_REQ_SSI1_TX0 29 + +#define MX35_PROD_SIGNATURE 0x1 /* For MX31 */ + +#endif /* ifndef __MACH_MX35_H__ */ diff --git a/arch/arm/mach-imx/mx3x.h b/arch/arm/mach-imx/mx3x.h new file mode 100644 index 000000000..6fec6114c --- /dev/null +++ b/arch/arm/mach-imx/mx3x.h @@ -0,0 +1,188 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MX3x_H__ +#define __MACH_MX3x_H__ + +/* + * MX31 memory map: + * + * Virt Phys Size What + * --------------------------------------------------------------------------- + * FC000000 43F00000 1M AIPS 1 + * FC100000 50000000 1M SPBA + * FC200000 53F00000 1M AIPS 2 + * FC500000 60000000 128M ROMPATCH + * FC400000 68000000 128M AVIC + * 70000000 256M IPU (MAX M2) + * 80000000 256M CSD0 SDRAM/DDR + * 90000000 256M CSD1 SDRAM/DDR + * A0000000 128M CS0 Flash + * A8000000 128M CS1 Flash + * B0000000 32M CS2 + * B2000000 32M CS3 + * F4000000 B4000000 32M CS4 + * B6000000 32M CS5 + * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers + * C0000000 64M PCMCIA/CF + */ + +/* + * L2CC + */ +#define MX3x_L2CC_BASE_ADDR 0x30000000 +#define MX3x_L2CC_SIZE SZ_1M + +/* + * AIPS 1 + */ +#define MX3x_AIPS1_BASE_ADDR 0x43f00000 +#define MX3x_AIPS1_SIZE SZ_1M +#define MX3x_MAX_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x04000) +#define MX3x_EVTMON_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x08000) +#define MX3x_CLKCTL_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x0c000) +#define MX3x_ETB_SLOT4_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x10000) +#define MX3x_ETB_SLOT5_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x14000) +#define MX3x_ECT_CTIO_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x18000) +#define MX3x_I2C_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x80000) +#define MX3x_I2C3_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x84000) +#define MX3x_UART1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x90000) +#define MX3x_UART2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x94000) +#define MX3x_I2C2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x98000) +#define MX3x_OWIRE_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x9c000) +#define MX3x_SSI1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa0000) +#define MX3x_CSPI1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa4000) +#define MX3x_KPP_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa8000) +#define MX3x_IOMUXC_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xac000) +#define MX3x_ECT_IP1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xb8000) +#define MX3x_ECT_IP2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xbc000) + +/* + * SPBA global module enabled #0 + */ +#define MX3x_SPBA0_BASE_ADDR 0x50000000 +#define MX3x_SPBA0_SIZE SZ_1M +#define MX3x_UART3_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x0c000) +#define MX3x_CSPI2_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x10000) +#define MX3x_SSI2_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x14000) +#define MX3x_ATA_DMA_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x20000) +#define MX3x_MSHC1_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x24000) +#define MX3x_SPBA_CTRL_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x3c000) + +/* + * AIPS 2 + */ +#define MX3x_AIPS2_BASE_ADDR 0x53f00000 +#define MX3x_AIPS2_SIZE SZ_1M +#define MX3x_CCM_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x80000) +#define MX3x_GPT1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x90000) +#define MX3x_EPIT1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x94000) +#define MX3x_EPIT2_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x98000) +#define MX3x_GPIO3_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xa4000) +#define MX3x_SCC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xac000) +#define MX3x_RNGA_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xb0000) +#define MX3x_IPU_CTRL_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xc0000) +#define MX3x_AUDMUX_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xc4000) +#define MX3x_GPIO1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xcc000) +#define MX3x_GPIO2_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd0000) +#define MX3x_SDMA_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd4000) +#define MX3x_RTC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd8000) +#define MX3x_WDOG_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xdc000) +#define MX3x_PWM_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xe0000) +#define MX3x_RTIC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xec000) + +/* + * ROMP and AVIC + */ +#define MX3x_ROMP_BASE_ADDR 0x60000000 +#define MX3x_ROMP_SIZE SZ_1M + +#define MX3x_AVIC_BASE_ADDR 0x68000000 +#define MX3x_AVIC_SIZE SZ_1M + +/* + * Memory regions and CS + */ +#define MX3x_IPU_MEM_BASE_ADDR 0x70000000 +#define MX3x_CSD0_BASE_ADDR 0x80000000 +#define MX3x_CSD1_BASE_ADDR 0x90000000 + +#define MX3x_CS0_BASE_ADDR 0xa0000000 +#define MX3x_CS1_BASE_ADDR 0xa8000000 +#define MX3x_CS2_BASE_ADDR 0xb0000000 +#define MX3x_CS3_BASE_ADDR 0xb2000000 + +#define MX3x_CS4_BASE_ADDR 0xb4000000 +#define MX3x_CS4_BASE_ADDR_VIRT 0xf6000000 +#define MX3x_CS4_SIZE SZ_32M + +#define MX3x_CS5_BASE_ADDR 0xb6000000 +#define MX3x_CS5_BASE_ADDR_VIRT 0xf8000000 +#define MX3x_CS5_SIZE SZ_32M + +/* + * NAND, SDRAM, WEIM, M3IF, EMI controllers + */ +#define MX3x_X_MEMC_BASE_ADDR 0xb8000000 +#define MX3x_X_MEMC_SIZE SZ_64K +#define MX3x_ESDCTL_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x1000) +#define MX3x_WEIM_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x2000) +#define MX3x_M3IF_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x3000) +#define MX3x_EMI_CTL_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x4000) +#define MX3x_PCMCIA_CTL_BASE_ADDR MX3x_EMI_CTL_BASE_ADDR + +#define MX3x_PCMCIA_MEM_BASE_ADDR 0xbc000000 + +/* + * Interrupt numbers + */ +#include <asm/irq.h> +#define MX3x_INT_I2C3 (NR_IRQS_LEGACY + 3) +#define MX3x_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX3x_INT_RTIC (NR_IRQS_LEGACY + 6) +#define MX3x_INT_I2C (NR_IRQS_LEGACY + 10) +#define MX3x_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX3x_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX3x_INT_ATA (NR_IRQS_LEGACY + 15) +#define MX3x_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX3x_INT_IIM (NR_IRQS_LEGACY + 19) +#define MX3x_INT_RNGA (NR_IRQS_LEGACY + 22) +#define MX3x_INT_EVTMON (NR_IRQS_LEGACY + 23) +#define MX3x_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX3x_INT_RTC (NR_IRQS_LEGACY + 25) +#define MX3x_INT_PWM (NR_IRQS_LEGACY + 26) +#define MX3x_INT_EPIT2 (NR_IRQS_LEGACY + 27) +#define MX3x_INT_EPIT1 (NR_IRQS_LEGACY + 28) +#define MX3x_INT_GPT (NR_IRQS_LEGACY + 29) +#define MX3x_INT_POWER_FAIL (NR_IRQS_LEGACY + 30) +#define MX3x_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX3x_INT_NANDFC (NR_IRQS_LEGACY + 33) +#define MX3x_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX3x_INT_MSHC1 (NR_IRQS_LEGACY + 39) +#define MX3x_INT_IPU_ERR (NR_IRQS_LEGACY + 41) +#define MX3x_INT_IPU_SYN (NR_IRQS_LEGACY + 42) +#define MX3x_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX3x_INT_ECT (NR_IRQS_LEGACY + 48) +#define MX3x_INT_SCC_SCM (NR_IRQS_LEGACY + 49) +#define MX3x_INT_SCC_SMN (NR_IRQS_LEGACY + 50) +#define MX3x_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX3x_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX3x_INT_WDOG (NR_IRQS_LEGACY + 55) +#define MX3x_INT_GPIO3 (NR_IRQS_LEGACY + 56) +#define MX3x_INT_EXT_POWER (NR_IRQS_LEGACY + 58) +#define MX3x_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59) +#define MX3x_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60) +#define MX3x_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61) +#define MX3x_INT_EXT_WDOG (NR_IRQS_LEGACY + 62) +#define MX3x_INT_EXT_TV (NR_IRQS_LEGACY + 63) + +#define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */ + +#endif /* ifndef __MACH_MX3x_H__ */ diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h new file mode 100644 index 000000000..026e2ca45 --- /dev/null +++ b/arch/arm/mach-imx/mxc.h @@ -0,0 +1,112 @@ +/* + * Copyright 2004-2007, 2010-2015 Freescale Semiconductor, Inc. + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_H__ +#define __ASM_ARCH_MXC_H__ + +#include <linux/types.h> + +#ifndef __ASM_ARCH_MXC_HARDWARE_H__ +#error "Do not include directly." +#endif + +#define MXC_CPU_MX1 1 +#define MXC_CPU_MX21 21 +#define MXC_CPU_MX25 25 +#define MXC_CPU_MX27 27 +#define MXC_CPU_MX31 31 +#define MXC_CPU_MX35 35 +#define MXC_CPU_MX51 51 +#define MXC_CPU_MX53 53 +#define MXC_CPU_IMX6SL 0x60 +#define MXC_CPU_IMX6DL 0x61 +#define MXC_CPU_IMX6SX 0x62 +#define MXC_CPU_IMX6Q 0x63 +#define MXC_CPU_IMX6UL 0x64 +#define MXC_CPU_IMX6ULL 0x65 +#define MXC_CPU_IMX6SLL 0x67 +#define MXC_CPU_IMX7D 0x72 + +#define IMX_DDR_TYPE_LPDDR2 1 + +#ifndef __ASSEMBLY__ +extern unsigned int __mxc_cpu_type; + +#ifdef CONFIG_SOC_IMX6SL +static inline bool cpu_is_imx6sl(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6SL; +} +#else +static inline bool cpu_is_imx6sl(void) +{ + return false; +} +#endif + +static inline bool cpu_is_imx6dl(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6DL; +} + +static inline bool cpu_is_imx6sx(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6SX; +} + +static inline bool cpu_is_imx6ul(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6UL; +} + +static inline bool cpu_is_imx6ull(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6ULL; +} + +static inline bool cpu_is_imx6sll(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6SLL; +} + +static inline bool cpu_is_imx6q(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6Q; +} + +static inline bool cpu_is_imx7d(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX7D; +} + +struct cpu_op { + u32 cpu_rate; +}; + +int tzic_enable_wake(void); + +extern struct cpu_op *(*get_cpu_op)(int *op); +#endif + +#define imx_readl readl_relaxed +#define imx_readw readw_relaxed +#define imx_writel writel_relaxed +#define imx_writew writew_relaxed + +#endif /* __ASM_ARCH_MXC_H__ */ diff --git a/arch/arm/mach-imx/pcm037.h b/arch/arm/mach-imx/pcm037.h new file mode 100644 index 000000000..470d3c887 --- /dev/null +++ b/arch/arm/mach-imx/pcm037.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PCM037_H__ +#define __PCM037_H__ + +enum pcm037_board_variant { + PCM037_PCM970, + PCM037_EET, +}; + +extern enum pcm037_board_variant pcm037_variant(void); + +#ifdef CONFIG_MACH_PCM037_EET +int pcm037_eet_init_devices(void); +#else +static inline int pcm037_eet_init_devices(void) { return 0; } +#endif + +#endif diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c new file mode 100644 index 000000000..c2d1b329f --- /dev/null +++ b/arch/arm/mach-imx/platsmp.c @@ -0,0 +1,129 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/of.h> +#include <linux/smp.h> + +#include <asm/cacheflush.h> +#include <asm/page.h> +#include <asm/smp_scu.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "hardware.h" + +u32 g_diag_reg; +static void __iomem *scu_base; + +static struct map_desc scu_io_desc __initdata = { + /* .virtual and .pfn are run-time assigned */ + .length = SZ_4K, + .type = MT_DEVICE, +}; + +void __init imx_scu_map_io(void) +{ + unsigned long base; + + /* Get SCU base */ + asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base)); + + scu_io_desc.virtual = IMX_IO_P2V(base); + scu_io_desc.pfn = __phys_to_pfn(base); + iotable_init(&scu_io_desc, 1); + + scu_base = IMX_IO_ADDRESS(base); +} + +static int imx_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + imx_set_cpu_jump(cpu, v7_secondary_startup); + imx_enable_cpu(cpu, true); + return 0; +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +static void __init imx_smp_init_cpus(void) +{ + int i, ncores; + + ncores = scu_get_core_count(scu_base); + + for (i = ncores; i < NR_CPUS; i++) + set_cpu_possible(i, false); +} + +void imx_smp_prepare(void) +{ + scu_enable(scu_base); +} + +static void __init imx_smp_prepare_cpus(unsigned int max_cpus) +{ + imx_smp_prepare(); + + /* + * The diagnostic register holds the errata bits. Mostly bootloader + * does not bring up secondary cores, so that when errata bits are set + * in bootloader, they are set only for boot cpu. But on a SMP + * configuration, it should be equally done on every single core. + * Read the register from boot cpu here, and will replicate it into + * secondary cores when booting them. + */ + asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc"); + sync_cache_w(&g_diag_reg); +} + +const struct smp_operations imx_smp_ops __initconst = { + .smp_init_cpus = imx_smp_init_cpus, + .smp_prepare_cpus = imx_smp_prepare_cpus, + .smp_boot_secondary = imx_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = imx_cpu_die, + .cpu_kill = imx_cpu_kill, +#endif +}; + +#define DCFG_CCSR_SCRATCHRW1 0x200 + +static int ls1021a_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + return 0; +} + +static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *np; + void __iomem *dcfg_base; + unsigned long paddr; + + np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-dcfg"); + dcfg_base = of_iomap(np, 0); + BUG_ON(!dcfg_base); + + paddr = __pa_symbol(secondary_startup); + writel_relaxed(cpu_to_be32(paddr), dcfg_base + DCFG_CCSR_SCRATCHRW1); + + iounmap(dcfg_base); +} + +const struct smp_operations ls1021a_smp_ops __initconst = { + .smp_prepare_cpus = ls1021a_smp_prepare_cpus, + .smp_boot_secondary = ls1021a_boot_secondary, +}; diff --git a/arch/arm/mach-imx/pm-imx25.c b/arch/arm/mach-imx/pm-imx25.c new file mode 100644 index 000000000..8bba9fcd9 --- /dev/null +++ b/arch/arm/mach-imx/pm-imx25.c @@ -0,0 +1,37 @@ +/* + * Copyright 2016 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/io.h> + +static int imx25_suspend_enter(suspend_state_t state) +{ + if (!IS_ENABLED(CONFIG_PM)) + return 0; + + switch (state) { + case PM_SUSPEND_MEM: + cpu_do_idle(); + break; + default: + return -EINVAL; + } + + return 0; +} + +static const struct platform_suspend_ops imx25_suspend_ops = { + .enter = imx25_suspend_enter, + .valid = suspend_valid_only_mem, +}; + +void __init imx25_pm_init(void) +{ + suspend_set_ops(&imx25_suspend_ops); +} diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c new file mode 100644 index 000000000..d94353556 --- /dev/null +++ b/arch/arm/mach-imx/pm-imx27.c @@ -0,0 +1,43 @@ +/* + * i.MX27 Power Management Routines + * + * Based on Freescale's BSP + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License. + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/io.h> + +#include "hardware.h" + +static int mx27_suspend_enter(suspend_state_t state) +{ + u32 cscr; + switch (state) { + case PM_SUSPEND_MEM: + /* Clear MPEN and SPEN to disable MPLL/SPLL */ + cscr = imx_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); + cscr &= 0xFFFFFFFC; + imx_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); + /* Executes WFI */ + cpu_do_idle(); + break; + + default: + return -EINVAL; + } + return 0; +} + +static const struct platform_suspend_ops mx27_suspend_ops = { + .enter = mx27_suspend_enter, + .valid = suspend_valid_only_mem, +}; + +void __init imx27_pm_init(void) +{ + suspend_set_ops(&mx27_suspend_ops); +} diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c new file mode 100644 index 000000000..14c630c89 --- /dev/null +++ b/arch/arm/mach-imx/pm-imx5.c @@ -0,0 +1,426 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/suspend.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/export.h> + +#include <linux/genalloc.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> + +#include <asm/cacheflush.h> +#include <asm/fncpy.h> +#include <asm/system_misc.h> +#include <asm/tlbflush.h> + +#include "common.h" +#include "cpuidle.h" +#include "hardware.h" + +#define MXC_CCM_CLPCR 0x54 +#define MXC_CCM_CLPCR_LPM_OFFSET 0 +#define MXC_CCM_CLPCR_LPM_MASK 0x3 +#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET 9 +#define MXC_CCM_CLPCR_VSTBY (0x1 << 8) +#define MXC_CCM_CLPCR_SBYOS (0x1 << 6) + +#define MXC_CORTEXA8_PLAT_LPC 0xc +#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0) +#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1) + +#define MXC_SRPG_NEON_SRPGCR 0x280 +#define MXC_SRPG_ARM_SRPGCR 0x2a0 +#define MXC_SRPG_EMPGC0_SRPGCR 0x2c0 +#define MXC_SRPG_EMPGC1_SRPGCR 0x2d0 + +#define MXC_SRPGCR_PCR 1 + +/* + * The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit. + * This is also the lowest power state possible without affecting + * non-cpu parts of the system. For these reasons, imx5 should default + * to always using this state for cpu idling. The PM_SUSPEND_STANDBY also + * uses this state and needs to take no action when registers remain confgiured + * for this state. + */ +#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF + +struct imx5_suspend_io_state { + u32 offset; + u32 clear; + u32 set; + u32 saved_value; +}; + +struct imx5_pm_data { + phys_addr_t ccm_addr; + phys_addr_t cortex_addr; + phys_addr_t gpc_addr; + phys_addr_t m4if_addr; + phys_addr_t iomuxc_addr; + void (*suspend_asm)(void __iomem *ocram_vbase); + const u32 *suspend_asm_sz; + const struct imx5_suspend_io_state *suspend_io_config; + int suspend_io_count; +}; + +static const struct imx5_suspend_io_state imx53_suspend_io_config[] = { +#define MX53_DSE_HIGHZ_MASK (0x7 << 19) + {.offset = 0x584, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM0 */ + {.offset = 0x594, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM1 */ + {.offset = 0x560, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM2 */ + {.offset = 0x554, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM3 */ + {.offset = 0x574, .clear = MX53_DSE_HIGHZ_MASK}, /* CAS */ + {.offset = 0x588, .clear = MX53_DSE_HIGHZ_MASK}, /* RAS */ + {.offset = 0x578, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_0 */ + {.offset = 0x570, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_1 */ + + {.offset = 0x580, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT0 */ + {.offset = 0x564, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT1 */ + {.offset = 0x57c, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS0 */ + {.offset = 0x590, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS1 */ + {.offset = 0x568, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS2 */ + {.offset = 0x558, .clear = MX53_DSE_HIGHZ_MASK}, /* SDSQ3 */ + {.offset = 0x6f0, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_ADDS */ + {.offset = 0x718, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_BODS */ + {.offset = 0x71c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B1DS */ + {.offset = 0x728, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B2DS */ + {.offset = 0x72c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B3DS */ + + /* Controls the CKE signal which is required to leave self refresh */ + {.offset = 0x720, .clear = MX53_DSE_HIGHZ_MASK, .set = 1 << 19}, /* CTLDS */ +}; + +static const struct imx5_pm_data imx51_pm_data __initconst = { + .ccm_addr = 0x73fd4000, + .cortex_addr = 0x83fa0000, + .gpc_addr = 0x73fd8000, +}; + +static const struct imx5_pm_data imx53_pm_data __initconst = { + .ccm_addr = 0x53fd4000, + .cortex_addr = 0x63fa0000, + .gpc_addr = 0x53fd8000, + .m4if_addr = 0x63fd8000, + .iomuxc_addr = 0x53fa8000, + .suspend_asm = &imx53_suspend, + .suspend_asm_sz = &imx53_suspend_sz, + .suspend_io_config = imx53_suspend_io_config, + .suspend_io_count = ARRAY_SIZE(imx53_suspend_io_config), +}; + +#define MX5_MAX_SUSPEND_IOSTATE ARRAY_SIZE(imx53_suspend_io_config) + +/* + * This structure is for passing necessary data for low level ocram + * suspend code(arch/arm/mach-imx/suspend-imx53.S), if this struct + * definition is changed, the offset definition in that file + * must be also changed accordingly otherwise, the suspend to ocram + * function will be broken! + */ +struct imx5_cpu_suspend_info { + void __iomem *m4if_base; + void __iomem *iomuxc_base; + u32 io_count; + struct imx5_suspend_io_state io_state[MX5_MAX_SUSPEND_IOSTATE]; +} __aligned(8); + +static void __iomem *ccm_base; +static void __iomem *cortex_base; +static void __iomem *gpc_base; +static void __iomem *suspend_ocram_base; +static void (*imx5_suspend_in_ocram_fn)(void __iomem *ocram_vbase); + +/* + * set cpu low power mode before WFI instruction. This function is called + * mx5 because it can be used for mx51, and mx53. + */ +static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) +{ + u32 plat_lpc, arm_srpgcr, ccm_clpcr; + u32 empgc0, empgc1; + int stop_mode = 0; + + /* always allow platform to issue a deep sleep mode request */ + plat_lpc = imx_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) & + ~(MXC_CORTEXA8_PLAT_LPC_DSM); + ccm_clpcr = imx_readl(ccm_base + MXC_CCM_CLPCR) & + ~(MXC_CCM_CLPCR_LPM_MASK); + arm_srpgcr = imx_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) & + ~(MXC_SRPGCR_PCR); + empgc0 = imx_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) & + ~(MXC_SRPGCR_PCR); + empgc1 = imx_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) & + ~(MXC_SRPGCR_PCR); + + switch (mode) { + case WAIT_CLOCKED: + break; + case WAIT_UNCLOCKED: + ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET; + break; + case WAIT_UNCLOCKED_POWER_OFF: + case STOP_POWER_OFF: + plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM + | MXC_CORTEXA8_PLAT_LPC_DBG_DSM; + if (mode == WAIT_UNCLOCKED_POWER_OFF) { + ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET; + ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY; + ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS; + stop_mode = 0; + } else { + ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET; + ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET; + ccm_clpcr |= MXC_CCM_CLPCR_VSTBY; + ccm_clpcr |= MXC_CCM_CLPCR_SBYOS; + stop_mode = 1; + } + arm_srpgcr |= MXC_SRPGCR_PCR; + break; + case STOP_POWER_ON: + ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET; + break; + default: + printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode); + return; + } + + imx_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC); + imx_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR); + imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR); + imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR); + + if (stop_mode) { + empgc0 |= MXC_SRPGCR_PCR; + empgc1 |= MXC_SRPGCR_PCR; + + imx_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); + imx_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); + } +} + +static int mx5_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + mx5_cpu_lp_set(STOP_POWER_OFF); + break; + case PM_SUSPEND_STANDBY: + /* DEFAULT_IDLE_STATE already configured */ + break; + default: + return -EINVAL; + } + + if (state == PM_SUSPEND_MEM) { + local_flush_tlb_all(); + flush_cache_all(); + + /*clear the EMPGC0/1 bits */ + imx_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); + imx_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); + + if (imx5_suspend_in_ocram_fn) + imx5_suspend_in_ocram_fn(suspend_ocram_base); + else + cpu_do_idle(); + + } else { + cpu_do_idle(); + } + + /* return registers to default idle state */ + mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE); + return 0; +} + +static int mx5_pm_valid(suspend_state_t state) +{ + return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); +} + +static const struct platform_suspend_ops mx5_suspend_ops = { + .valid = mx5_pm_valid, + .enter = mx5_suspend_enter, +}; + +static inline int imx5_cpu_do_idle(void) +{ + int ret = tzic_enable_wake(); + + if (likely(!ret)) + cpu_do_idle(); + + return ret; +} + +static void imx5_pm_idle(void) +{ + imx5_cpu_do_idle(); +} + +static int __init imx_suspend_alloc_ocram( + size_t size, + void __iomem **virt_out, + phys_addr_t *phys_out) +{ + struct device_node *node; + struct platform_device *pdev; + struct gen_pool *ocram_pool; + unsigned long ocram_base; + void __iomem *virt; + phys_addr_t phys; + int ret = 0; + + /* Copied from imx6: TODO factorize */ + node = of_find_compatible_node(NULL, NULL, "mmio-sram"); + if (!node) { + pr_warn("%s: failed to find ocram node!\n", __func__); + return -ENODEV; + } + + pdev = of_find_device_by_node(node); + if (!pdev) { + pr_warn("%s: failed to find ocram device!\n", __func__); + ret = -ENODEV; + goto put_node; + } + + ocram_pool = gen_pool_get(&pdev->dev, NULL); + if (!ocram_pool) { + pr_warn("%s: ocram pool unavailable!\n", __func__); + ret = -ENODEV; + goto put_device; + } + + ocram_base = gen_pool_alloc(ocram_pool, size); + if (!ocram_base) { + pr_warn("%s: unable to alloc ocram!\n", __func__); + ret = -ENOMEM; + goto put_device; + } + + phys = gen_pool_virt_to_phys(ocram_pool, ocram_base); + virt = __arm_ioremap_exec(phys, size, false); + if (phys_out) + *phys_out = phys; + if (virt_out) + *virt_out = virt; + +put_device: + put_device(&pdev->dev); +put_node: + of_node_put(node); + + return ret; +} + +static int __init imx5_suspend_init(const struct imx5_pm_data *soc_data) +{ + struct imx5_cpu_suspend_info *suspend_info; + int ret; + /* Need this to avoid compile error due to const typeof in fncpy.h */ + void (*suspend_asm)(void __iomem *) = soc_data->suspend_asm; + + if (!suspend_asm) + return 0; + + if (!soc_data->suspend_asm_sz || !*soc_data->suspend_asm_sz) + return -EINVAL; + + ret = imx_suspend_alloc_ocram( + *soc_data->suspend_asm_sz + sizeof(*suspend_info), + &suspend_ocram_base, NULL); + if (ret) + return ret; + + suspend_info = suspend_ocram_base; + + suspend_info->io_count = soc_data->suspend_io_count; + memcpy(suspend_info->io_state, soc_data->suspend_io_config, + sizeof(*suspend_info->io_state) * soc_data->suspend_io_count); + + suspend_info->m4if_base = ioremap(soc_data->m4if_addr, SZ_16K); + if (!suspend_info->m4if_base) { + ret = -ENOMEM; + goto failed_map_m4if; + } + + suspend_info->iomuxc_base = ioremap(soc_data->iomuxc_addr, SZ_16K); + if (!suspend_info->iomuxc_base) { + ret = -ENOMEM; + goto failed_map_iomuxc; + } + + imx5_suspend_in_ocram_fn = fncpy( + suspend_ocram_base + sizeof(*suspend_info), + suspend_asm, + *soc_data->suspend_asm_sz); + + return 0; + +failed_map_iomuxc: + iounmap(suspend_info->m4if_base); + +failed_map_m4if: + return ret; +} + +static int __init imx5_pm_common_init(const struct imx5_pm_data *data) +{ + int ret; + struct clk *gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + + if (IS_ERR(gpc_dvfs_clk)) + return PTR_ERR(gpc_dvfs_clk); + + ret = clk_prepare_enable(gpc_dvfs_clk); + if (ret) + return ret; + + arm_pm_idle = imx5_pm_idle; + + ccm_base = ioremap(data->ccm_addr, SZ_16K); + cortex_base = ioremap(data->cortex_addr, SZ_16K); + gpc_base = ioremap(data->gpc_addr, SZ_16K); + WARN_ON(!ccm_base || !cortex_base || !gpc_base); + + /* Set the registers to the default cpu idle state. */ + mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE); + + ret = imx5_cpuidle_init(); + if (ret) + pr_warn("%s: cpuidle init failed %d\n", __func__, ret); + + ret = imx5_suspend_init(data); + if (ret) + pr_warn("%s: No DDR LPM support with suspend %d!\n", + __func__, ret); + + suspend_set_ops(&mx5_suspend_ops); + + return 0; +} + +void __init imx51_pm_init(void) +{ + if (IS_ENABLED(CONFIG_SOC_IMX51)) + imx5_pm_common_init(&imx51_pm_data); +} + +void __init imx53_pm_init(void) +{ + if (IS_ENABLED(CONFIG_SOC_IMX53)) + imx5_pm_common_init(&imx53_pm_data); +} diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c new file mode 100644 index 000000000..c3ca6e2cf --- /dev/null +++ b/arch/arm/mach-imx/pm-imx6.c @@ -0,0 +1,701 @@ +/* + * Copyright 2011-2014 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/genalloc.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/regmap.h> +#include <linux/suspend.h> +#include <asm/cacheflush.h> +#include <asm/fncpy.h> +#include <asm/proc-fns.h> +#include <asm/suspend.h> +#include <asm/tlb.h> + +#include "common.h" +#include "hardware.h" + +#define CCR 0x0 +#define BM_CCR_WB_COUNT (0x7 << 16) +#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) +#define BM_CCR_RBC_EN (0x1 << 27) + +#define CLPCR 0x54 +#define BP_CLPCR_LPM 0 +#define BM_CLPCR_LPM (0x3 << 0) +#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) +#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) +#define BM_CLPCR_SBYOS (0x1 << 6) +#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) +#define BM_CLPCR_VSTBY (0x1 << 8) +#define BP_CLPCR_STBY_COUNT 9 +#define BM_CLPCR_STBY_COUNT (0x3 << 9) +#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) +#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) +#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) +#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) +#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) +#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) +#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) +#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) +#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) +#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) +#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) + +#define CGPR 0x64 +#define BM_CGPR_INT_MEM_CLK_LPM (0x1 << 17) + +#define MX6Q_SUSPEND_OCRAM_SIZE 0x1000 +#define MX6_MAX_MMDC_IO_NUM 33 + +static void __iomem *ccm_base; +static void __iomem *suspend_ocram_base; +static void (*imx6_suspend_in_ocram_fn)(void __iomem *ocram_vbase); + +/* + * suspend ocram space layout: + * ======================== high address ====================== + * . + * . + * . + * ^ + * ^ + * ^ + * imx6_suspend code + * PM_INFO structure(imx6_cpu_pm_info) + * ======================== low address ======================= + */ + +struct imx6_pm_base { + phys_addr_t pbase; + void __iomem *vbase; +}; + +struct imx6_pm_socdata { + u32 ddr_type; + const char *mmdc_compat; + const char *src_compat; + const char *iomuxc_compat; + const char *gpc_compat; + const char *pl310_compat; + const u32 mmdc_io_num; + const u32 *mmdc_io_offset; +}; + +static const u32 imx6q_mmdc_io_offset[] __initconst = { + 0x5ac, 0x5b4, 0x528, 0x520, /* DQM0 ~ DQM3 */ + 0x514, 0x510, 0x5bc, 0x5c4, /* DQM4 ~ DQM7 */ + 0x56c, 0x578, 0x588, 0x594, /* CAS, RAS, SDCLK_0, SDCLK_1 */ + 0x5a8, 0x5b0, 0x524, 0x51c, /* SDQS0 ~ SDQS3 */ + 0x518, 0x50c, 0x5b8, 0x5c0, /* SDQS4 ~ SDQS7 */ + 0x784, 0x788, 0x794, 0x79c, /* GPR_B0DS ~ GPR_B3DS */ + 0x7a0, 0x7a4, 0x7a8, 0x748, /* GPR_B4DS ~ GPR_B7DS */ + 0x59c, 0x5a0, 0x750, 0x774, /* SODT0, SODT1, MODE_CTL, MODE */ + 0x74c, /* GPR_ADDS */ +}; + +static const u32 imx6dl_mmdc_io_offset[] __initconst = { + 0x470, 0x474, 0x478, 0x47c, /* DQM0 ~ DQM3 */ + 0x480, 0x484, 0x488, 0x48c, /* DQM4 ~ DQM7 */ + 0x464, 0x490, 0x4ac, 0x4b0, /* CAS, RAS, SDCLK_0, SDCLK_1 */ + 0x4bc, 0x4c0, 0x4c4, 0x4c8, /* DRAM_SDQS0 ~ DRAM_SDQS3 */ + 0x4cc, 0x4d0, 0x4d4, 0x4d8, /* DRAM_SDQS4 ~ DRAM_SDQS7 */ + 0x764, 0x770, 0x778, 0x77c, /* GPR_B0DS ~ GPR_B3DS */ + 0x780, 0x784, 0x78c, 0x748, /* GPR_B4DS ~ GPR_B7DS */ + 0x4b4, 0x4b8, 0x750, 0x760, /* SODT0, SODT1, MODE_CTL, MODE */ + 0x74c, /* GPR_ADDS */ +}; + +static const u32 imx6sl_mmdc_io_offset[] __initconst = { + 0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */ + 0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */ + 0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */ + 0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, MODE_CTL, MODE */ + 0x330, 0x334, 0x320, /* SDCKE0, SDCKE1, RESET */ +}; + +static const u32 imx6sll_mmdc_io_offset[] __initconst = { + 0x294, 0x298, 0x29c, 0x2a0, /* DQM0 ~ DQM3 */ + 0x544, 0x54c, 0x554, 0x558, /* GPR_B0DS ~ GPR_B3DS */ + 0x530, 0x540, 0x2ac, 0x52c, /* MODE_CTL, MODE, SDCLK_0, GPR_ADDDS */ + 0x2a4, 0x2a8, /* SDCKE0, SDCKE1*/ +}; + +static const u32 imx6sx_mmdc_io_offset[] __initconst = { + 0x2ec, 0x2f0, 0x2f4, 0x2f8, /* DQM0 ~ DQM3 */ + 0x60c, 0x610, 0x61c, 0x620, /* GPR_B0DS ~ GPR_B3DS */ + 0x300, 0x2fc, 0x32c, 0x5f4, /* CAS, RAS, SDCLK_0, GPR_ADDS */ + 0x310, 0x314, 0x5f8, 0x608, /* SODT0, SODT1, MODE_CTL, MODE */ + 0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */ +}; + +static const u32 imx6ul_mmdc_io_offset[] __initconst = { + 0x244, 0x248, 0x24c, 0x250, /* DQM0, DQM1, RAS, CAS */ + 0x27c, 0x498, 0x4a4, 0x490, /* SDCLK0, GPR_B0DS-B1DS, GPR_ADDS */ + 0x280, 0x284, 0x260, 0x264, /* SDQS0~1, SODT0, SODT1 */ + 0x494, 0x4b0, /* MODE_CTL, MODE, */ +}; + +static const struct imx6_pm_socdata imx6q_pm_data __initconst = { + .mmdc_compat = "fsl,imx6q-mmdc", + .src_compat = "fsl,imx6q-src", + .iomuxc_compat = "fsl,imx6q-iomuxc", + .gpc_compat = "fsl,imx6q-gpc", + .pl310_compat = "arm,pl310-cache", + .mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset), + .mmdc_io_offset = imx6q_mmdc_io_offset, +}; + +static const struct imx6_pm_socdata imx6dl_pm_data __initconst = { + .mmdc_compat = "fsl,imx6q-mmdc", + .src_compat = "fsl,imx6q-src", + .iomuxc_compat = "fsl,imx6dl-iomuxc", + .gpc_compat = "fsl,imx6q-gpc", + .pl310_compat = "arm,pl310-cache", + .mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset), + .mmdc_io_offset = imx6dl_mmdc_io_offset, +}; + +static const struct imx6_pm_socdata imx6sl_pm_data __initconst = { + .mmdc_compat = "fsl,imx6sl-mmdc", + .src_compat = "fsl,imx6sl-src", + .iomuxc_compat = "fsl,imx6sl-iomuxc", + .gpc_compat = "fsl,imx6sl-gpc", + .pl310_compat = "arm,pl310-cache", + .mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset), + .mmdc_io_offset = imx6sl_mmdc_io_offset, +}; + +static const struct imx6_pm_socdata imx6sll_pm_data __initconst = { + .mmdc_compat = "fsl,imx6sll-mmdc", + .src_compat = "fsl,imx6sll-src", + .iomuxc_compat = "fsl,imx6sll-iomuxc", + .gpc_compat = "fsl,imx6sll-gpc", + .pl310_compat = "arm,pl310-cache", + .mmdc_io_num = ARRAY_SIZE(imx6sll_mmdc_io_offset), + .mmdc_io_offset = imx6sll_mmdc_io_offset, +}; + +static const struct imx6_pm_socdata imx6sx_pm_data __initconst = { + .mmdc_compat = "fsl,imx6sx-mmdc", + .src_compat = "fsl,imx6sx-src", + .iomuxc_compat = "fsl,imx6sx-iomuxc", + .gpc_compat = "fsl,imx6sx-gpc", + .pl310_compat = "arm,pl310-cache", + .mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset), + .mmdc_io_offset = imx6sx_mmdc_io_offset, +}; + +static const struct imx6_pm_socdata imx6ul_pm_data __initconst = { + .mmdc_compat = "fsl,imx6ul-mmdc", + .src_compat = "fsl,imx6ul-src", + .iomuxc_compat = "fsl,imx6ul-iomuxc", + .gpc_compat = "fsl,imx6ul-gpc", + .pl310_compat = NULL, + .mmdc_io_num = ARRAY_SIZE(imx6ul_mmdc_io_offset), + .mmdc_io_offset = imx6ul_mmdc_io_offset, +}; + +/* + * This structure is for passing necessary data for low level ocram + * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct + * definition is changed, the offset definition in + * arch/arm/mach-imx/suspend-imx6.S must be also changed accordingly, + * otherwise, the suspend to ocram function will be broken! + */ +struct imx6_cpu_pm_info { + phys_addr_t pbase; /* The physical address of pm_info. */ + phys_addr_t resume_addr; /* The physical resume address for asm code */ + u32 ddr_type; + u32 pm_info_size; /* Size of pm_info. */ + struct imx6_pm_base mmdc_base; + struct imx6_pm_base src_base; + struct imx6_pm_base iomuxc_base; + struct imx6_pm_base ccm_base; + struct imx6_pm_base gpc_base; + struct imx6_pm_base l2_base; + u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */ + u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */ +} __aligned(8); + +void imx6_set_int_mem_clk_lpm(bool enable) +{ + u32 val = readl_relaxed(ccm_base + CGPR); + + val &= ~BM_CGPR_INT_MEM_CLK_LPM; + if (enable) + val |= BM_CGPR_INT_MEM_CLK_LPM; + writel_relaxed(val, ccm_base + CGPR); +} + +void imx6_enable_rbc(bool enable) +{ + u32 val; + + /* + * need to mask all interrupts in GPC before + * operating RBC configurations + */ + imx_gpc_mask_all(); + + /* configure RBC enable bit */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_EN; + val |= enable ? BM_CCR_RBC_EN : 0; + writel_relaxed(val, ccm_base + CCR); + + /* configure RBC count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_BYPASS_COUNT; + val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; + writel(val, ccm_base + CCR); + + /* + * need to delay at least 2 cycles of CKIL(32K) + * due to hardware design requirement, which is + * ~61us, here we use 65us for safe + */ + udelay(65); + + /* restore GPC interrupt mask settings */ + imx_gpc_restore_all(); +} + +static void imx6q_enable_wb(bool enable) +{ + u32 val; + + /* configure well bias enable bit */ + val = readl_relaxed(ccm_base + CLPCR); + val &= ~BM_CLPCR_WB_PER_AT_LPM; + val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; + writel_relaxed(val, ccm_base + CLPCR); + + /* configure well bias count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_WB_COUNT; + val |= enable ? BM_CCR_WB_COUNT : 0; + writel_relaxed(val, ccm_base + CCR); +} + +int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) +{ + u32 val = readl_relaxed(ccm_base + CLPCR); + + val &= ~BM_CLPCR_LPM; + switch (mode) { + case WAIT_CLOCKED: + break; + case WAIT_UNCLOCKED: + val |= 0x1 << BP_CLPCR_LPM; + val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; + break; + case STOP_POWER_ON: + val |= 0x2 << BP_CLPCR_LPM; + val &= ~BM_CLPCR_VSTBY; + val &= ~BM_CLPCR_SBYOS; + if (cpu_is_imx6sl()) + val |= BM_CLPCR_BYPASS_PMIC_READY; + if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() || + cpu_is_imx6ull() || cpu_is_imx6sll()) + val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; + else + val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; + break; + case WAIT_UNCLOCKED_POWER_OFF: + val |= 0x1 << BP_CLPCR_LPM; + val &= ~BM_CLPCR_VSTBY; + val &= ~BM_CLPCR_SBYOS; + break; + case STOP_POWER_OFF: + val |= 0x2 << BP_CLPCR_LPM; + val |= 0x3 << BP_CLPCR_STBY_COUNT; + val |= BM_CLPCR_VSTBY; + val |= BM_CLPCR_SBYOS; + if (cpu_is_imx6sl() || cpu_is_imx6sx()) + val |= BM_CLPCR_BYPASS_PMIC_READY; + if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() || + cpu_is_imx6ull() || cpu_is_imx6sll()) + val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; + else + val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; + break; + default: + return -EINVAL; + } + + /* + * ERR007265: CCM: When improper low-power sequence is used, + * the SoC enters low power mode before the ARM core executes WFI. + * + * Software workaround: + * 1) Software should trigger IRQ #32 (IOMUX) to be always pending + * by setting IOMUX_GPR1_GINT. + * 2) Software should then unmask IRQ #32 in GPC before setting CCM + * Low-Power mode. + * 3) Software should mask IRQ #32 right after CCM Low-Power mode + * is set (set bits 0-1 of CCM_CLPCR). + * + * Note that IRQ #32 is GIC SPI #0. + */ + imx_gpc_hwirq_unmask(0); + writel_relaxed(val, ccm_base + CLPCR); + imx_gpc_hwirq_mask(0); + + return 0; +} + +static int imx6q_suspend_finish(unsigned long val) +{ + if (!imx6_suspend_in_ocram_fn) { + cpu_do_idle(); + } else { + /* + * call low level suspend function in ocram, + * as we need to float DDR IO. + */ + local_flush_tlb_all(); + /* check if need to flush internal L2 cache */ + if (!((struct imx6_cpu_pm_info *) + suspend_ocram_base)->l2_base.vbase) + flush_cache_all(); + imx6_suspend_in_ocram_fn(suspend_ocram_base); + } + + return 0; +} + +static int imx6q_pm_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + imx6_set_lpm(STOP_POWER_ON); + imx6_set_int_mem_clk_lpm(true); + imx_gpc_pre_suspend(false); + if (cpu_is_imx6sl()) + imx6sl_set_wait_clk(true); + /* Zzz ... */ + cpu_do_idle(); + if (cpu_is_imx6sl()) + imx6sl_set_wait_clk(false); + imx_gpc_post_resume(); + imx6_set_lpm(WAIT_CLOCKED); + break; + case PM_SUSPEND_MEM: + imx6_set_lpm(STOP_POWER_OFF); + imx6_set_int_mem_clk_lpm(false); + imx6q_enable_wb(true); + /* + * For suspend into ocram, asm code already take care of + * RBC setting, so we do NOT need to do that here. + */ + if (!imx6_suspend_in_ocram_fn) + imx6_enable_rbc(true); + imx_gpc_pre_suspend(true); + imx_anatop_pre_suspend(); + /* Zzz ... */ + cpu_suspend(0, imx6q_suspend_finish); + if (cpu_is_imx6q() || cpu_is_imx6dl()) + imx_smp_prepare(); + imx_anatop_post_resume(); + imx_gpc_post_resume(); + imx6_enable_rbc(false); + imx6q_enable_wb(false); + imx6_set_int_mem_clk_lpm(true); + imx6_set_lpm(WAIT_CLOCKED); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int imx6q_pm_valid(suspend_state_t state) +{ + return (state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM); +} + +static const struct platform_suspend_ops imx6q_pm_ops = { + .enter = imx6q_pm_enter, + .valid = imx6q_pm_valid, +}; + +static int __init imx6_pm_get_base(struct imx6_pm_base *base, + const char *compat) +{ + struct device_node *node; + struct resource res; + int ret = 0; + + node = of_find_compatible_node(NULL, NULL, compat); + if (!node) + return -ENODEV; + + ret = of_address_to_resource(node, 0, &res); + if (ret) + goto put_node; + + base->pbase = res.start; + base->vbase = ioremap(res.start, resource_size(&res)); + if (!base->vbase) + ret = -ENOMEM; + +put_node: + of_node_put(node); + return ret; +} + +static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) +{ + phys_addr_t ocram_pbase; + struct device_node *node; + struct platform_device *pdev; + struct imx6_cpu_pm_info *pm_info; + struct gen_pool *ocram_pool; + unsigned long ocram_base; + int i, ret = 0; + const u32 *mmdc_offset_array; + + suspend_set_ops(&imx6q_pm_ops); + + if (!socdata) { + pr_warn("%s: invalid argument!\n", __func__); + return -EINVAL; + } + + node = of_find_compatible_node(NULL, NULL, "mmio-sram"); + if (!node) { + pr_warn("%s: failed to find ocram node!\n", __func__); + return -ENODEV; + } + + pdev = of_find_device_by_node(node); + if (!pdev) { + pr_warn("%s: failed to find ocram device!\n", __func__); + ret = -ENODEV; + goto put_node; + } + + ocram_pool = gen_pool_get(&pdev->dev, NULL); + if (!ocram_pool) { + pr_warn("%s: ocram pool unavailable!\n", __func__); + ret = -ENODEV; + goto put_device; + } + + ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE); + if (!ocram_base) { + pr_warn("%s: unable to alloc ocram!\n", __func__); + ret = -ENOMEM; + goto put_device; + } + + ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base); + + suspend_ocram_base = __arm_ioremap_exec(ocram_pbase, + MX6Q_SUSPEND_OCRAM_SIZE, false); + + memset(suspend_ocram_base, 0, sizeof(*pm_info)); + pm_info = suspend_ocram_base; + pm_info->pbase = ocram_pbase; + pm_info->resume_addr = __pa_symbol(v7_cpu_resume); + pm_info->pm_info_size = sizeof(*pm_info); + + /* + * ccm physical address is not used by asm code currently, + * so get ccm virtual address directly. + */ + pm_info->ccm_base.vbase = ccm_base; + + ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat); + if (ret) { + pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret); + goto put_device; + } + + ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat); + if (ret) { + pr_warn("%s: failed to get src base %d!\n", __func__, ret); + goto src_map_failed; + } + + ret = imx6_pm_get_base(&pm_info->iomuxc_base, socdata->iomuxc_compat); + if (ret) { + pr_warn("%s: failed to get iomuxc base %d!\n", __func__, ret); + goto iomuxc_map_failed; + } + + ret = imx6_pm_get_base(&pm_info->gpc_base, socdata->gpc_compat); + if (ret) { + pr_warn("%s: failed to get gpc base %d!\n", __func__, ret); + goto gpc_map_failed; + } + + if (socdata->pl310_compat) { + ret = imx6_pm_get_base(&pm_info->l2_base, socdata->pl310_compat); + if (ret) { + pr_warn("%s: failed to get pl310-cache base %d!\n", + __func__, ret); + goto pl310_cache_map_failed; + } + } + + pm_info->ddr_type = imx_mmdc_get_ddr_type(); + pm_info->mmdc_io_num = socdata->mmdc_io_num; + mmdc_offset_array = socdata->mmdc_io_offset; + + for (i = 0; i < pm_info->mmdc_io_num; i++) { + pm_info->mmdc_io_val[i][0] = + mmdc_offset_array[i]; + pm_info->mmdc_io_val[i][1] = + readl_relaxed(pm_info->iomuxc_base.vbase + + mmdc_offset_array[i]); + } + + imx6_suspend_in_ocram_fn = fncpy( + suspend_ocram_base + sizeof(*pm_info), + &imx6_suspend, + MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info)); + + goto put_device; + +pl310_cache_map_failed: + iounmap(pm_info->gpc_base.vbase); +gpc_map_failed: + iounmap(pm_info->iomuxc_base.vbase); +iomuxc_map_failed: + iounmap(pm_info->src_base.vbase); +src_map_failed: + iounmap(pm_info->mmdc_base.vbase); +put_device: + put_device(&pdev->dev); +put_node: + of_node_put(node); + + return ret; +} + +static void __init imx6_pm_common_init(const struct imx6_pm_socdata + *socdata) +{ + struct regmap *gpr; + int ret; + + WARN_ON(!ccm_base); + + if (IS_ENABLED(CONFIG_SUSPEND)) { + ret = imx6q_suspend_init(socdata); + if (ret) + pr_warn("%s: No DDR LPM support with suspend %d!\n", + __func__, ret); + } + + /* + * This is for SW workaround step #1 of ERR007265, see comments + * in imx6_set_lpm for details of this errata. + * Force IOMUXC irq pending, so that the interrupt to GPC can be + * used to deassert dsm_request signal when the signal gets + * asserted unexpectedly. + */ + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) + regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT, + IMX6Q_GPR1_GINT); +} + +static void imx6_pm_stby_poweroff(void) +{ + gic_cpu_if_down(0); + imx6_set_lpm(STOP_POWER_OFF); + imx6q_suspend_finish(0); + + mdelay(1000); + + pr_emerg("Unable to poweroff system\n"); +} + +static int imx6_pm_stby_poweroff_probe(void) +{ + if (pm_power_off) { + pr_warn("%s: pm_power_off already claimed %p %pf!\n", + __func__, pm_power_off, pm_power_off); + return -EBUSY; + } + + pm_power_off = imx6_pm_stby_poweroff; + return 0; +} + +void __init imx6_pm_ccm_init(const char *ccm_compat) +{ + struct device_node *np; + u32 val; + + np = of_find_compatible_node(NULL, NULL, ccm_compat); + ccm_base = of_iomap(np, 0); + BUG_ON(!ccm_base); + + /* + * Initialize CCM_CLPCR_LPM into RUN mode to avoid ARM core + * clock being shut down unexpectedly by WAIT mode. + */ + val = readl_relaxed(ccm_base + CLPCR); + val &= ~BM_CLPCR_LPM; + writel_relaxed(val, ccm_base + CLPCR); + + if (of_property_read_bool(np, "fsl,pmic-stby-poweroff")) + imx6_pm_stby_poweroff_probe(); +} + +void __init imx6q_pm_init(void) +{ + imx6_pm_common_init(&imx6q_pm_data); +} + +void __init imx6dl_pm_init(void) +{ + imx6_pm_common_init(&imx6dl_pm_data); +} + +void __init imx6sl_pm_init(void) +{ + struct regmap *gpr; + + if (cpu_is_imx6sl()) { + imx6_pm_common_init(&imx6sl_pm_data); + } else { + imx6_pm_common_init(&imx6sll_pm_data); + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) + regmap_update_bits(gpr, IOMUXC_GPR5, + IMX6SLL_GPR5_AFCG_X_BYPASS_MASK, 0); + } +} + +void __init imx6sx_pm_init(void) +{ + imx6_pm_common_init(&imx6sx_pm_data); +} + +void __init imx6ul_pm_init(void) +{ + imx6_pm_common_init(&imx6ul_pm_data); +} diff --git a/arch/arm/mach-imx/resume-imx6.S b/arch/arm/mach-imx/resume-imx6.S new file mode 100644 index 000000000..5bd1ba7ef --- /dev/null +++ b/arch/arm/mach-imx/resume-imx6.S @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/asm-offsets.h> +#include <asm/hardware/cache-l2x0.h> +#include "hardware.h" + +/* + * The following code must assume it is running from physical address + * where absolute virtual addresses to the data section have to be + * turned into relative ones. + */ + +ENTRY(v7_cpu_resume) + bl v7_invalidate_l1 +#ifdef CONFIG_CACHE_L2X0 + bl l2c310_early_resume +#endif + b cpu_resume +ENDPROC(v7_cpu_resume) diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c new file mode 100644 index 000000000..495d85d0f --- /dev/null +++ b/arch/arm/mach-imx/src.c @@ -0,0 +1,142 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/reset-controller.h> +#include <linux/smp.h> +#include <asm/smp_plat.h> +#include "common.h" + +#define SRC_SCR 0x000 +#define SRC_GPR1 0x020 +#define BP_SRC_SCR_WARM_RESET_ENABLE 0 +#define BP_SRC_SCR_SW_GPU_RST 1 +#define BP_SRC_SCR_SW_VPU_RST 2 +#define BP_SRC_SCR_SW_IPU1_RST 3 +#define BP_SRC_SCR_SW_OPEN_VG_RST 4 +#define BP_SRC_SCR_SW_IPU2_RST 12 +#define BP_SRC_SCR_CORE1_RST 14 +#define BP_SRC_SCR_CORE1_ENABLE 22 + +static void __iomem *src_base; +static DEFINE_SPINLOCK(scr_lock); + +static const int sw_reset_bits[5] = { + BP_SRC_SCR_SW_GPU_RST, + BP_SRC_SCR_SW_VPU_RST, + BP_SRC_SCR_SW_IPU1_RST, + BP_SRC_SCR_SW_OPEN_VG_RST, + BP_SRC_SCR_SW_IPU2_RST +}; + +static int imx_src_reset_module(struct reset_controller_dev *rcdev, + unsigned long sw_reset_idx) +{ + unsigned long timeout; + unsigned long flags; + int bit; + u32 val; + + if (!src_base) + return -ENODEV; + + if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits)) + return -EINVAL; + + bit = 1 << sw_reset_bits[sw_reset_idx]; + + spin_lock_irqsave(&scr_lock, flags); + val = readl_relaxed(src_base + SRC_SCR); + val |= bit; + writel_relaxed(val, src_base + SRC_SCR); + spin_unlock_irqrestore(&scr_lock, flags); + + timeout = jiffies + msecs_to_jiffies(1000); + while (readl(src_base + SRC_SCR) & bit) { + if (time_after(jiffies, timeout)) + return -ETIME; + cpu_relax(); + } + + return 0; +} + +static const struct reset_control_ops imx_src_ops = { + .reset = imx_src_reset_module, +}; + +static struct reset_controller_dev imx_reset_controller = { + .ops = &imx_src_ops, + .nr_resets = ARRAY_SIZE(sw_reset_bits), +}; + +void imx_enable_cpu(int cpu, bool enable) +{ + u32 mask, val; + + cpu = cpu_logical_map(cpu); + mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1); + spin_lock(&scr_lock); + val = readl_relaxed(src_base + SRC_SCR); + val = enable ? val | mask : val & ~mask; + val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1); + writel_relaxed(val, src_base + SRC_SCR); + spin_unlock(&scr_lock); +} + +void imx_set_cpu_jump(int cpu, void *jump_addr) +{ + cpu = cpu_logical_map(cpu); + writel_relaxed(__pa_symbol(jump_addr), + src_base + SRC_GPR1 + cpu * 8); +} + +u32 imx_get_cpu_arg(int cpu) +{ + cpu = cpu_logical_map(cpu); + return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4); +} + +void imx_set_cpu_arg(int cpu, u32 arg) +{ + cpu = cpu_logical_map(cpu); + writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4); +} + +void __init imx_src_init(void) +{ + struct device_node *np; + u32 val; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx51-src"); + if (!np) + return; + src_base = of_iomap(np, 0); + WARN_ON(!src_base); + + imx_reset_controller.of_node = np; + if (IS_ENABLED(CONFIG_RESET_CONTROLLER)) + reset_controller_register(&imx_reset_controller); + + /* + * force warm reset sources to generate cold reset + * for a more reliable restart + */ + spin_lock(&scr_lock); + val = readl_relaxed(src_base + SRC_SCR); + val &= ~(1 << BP_SRC_SCR_WARM_RESET_ENABLE); + writel_relaxed(val, src_base + SRC_SCR); + spin_unlock(&scr_lock); +} diff --git a/arch/arm/mach-imx/ssi-fiq-ksym.c b/arch/arm/mach-imx/ssi-fiq-ksym.c new file mode 100644 index 000000000..792090f9a --- /dev/null +++ b/arch/arm/mach-imx/ssi-fiq-ksym.c @@ -0,0 +1,20 @@ +/* + * Exported ksyms for the SSI FIQ handler + * + * Copyright (C) 2009, Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> + +#include <linux/platform_data/asoc-imx-ssi.h> + +EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer); +EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer); +EXPORT_SYMBOL(imx_ssi_fiq_start); +EXPORT_SYMBOL(imx_ssi_fiq_end); +EXPORT_SYMBOL(imx_ssi_fiq_base); + diff --git a/arch/arm/mach-imx/ssi-fiq.S b/arch/arm/mach-imx/ssi-fiq.S new file mode 100644 index 000000000..a8b93c5f2 --- /dev/null +++ b/arch/arm/mach-imx/ssi-fiq.S @@ -0,0 +1,147 @@ +/* + * Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * r8 = bit 0-15: tx offset, bit 16-31: tx buffer size + * r9 = bit 0-15: rx offset, bit 16-31: rx buffer size + */ + +#define SSI_STX0 0x00 +#define SSI_SRX0 0x08 +#define SSI_SISR 0x14 +#define SSI_SIER 0x18 +#define SSI_SACNT 0x38 + +#define SSI_SACNT_AC97EN (1 << 0) + +#define SSI_SIER_TFE0_EN (1 << 0) +#define SSI_SISR_TFE0 (1 << 0) +#define SSI_SISR_RFF0 (1 << 2) +#define SSI_SIER_RFF0_EN (1 << 2) + + .text + .global imx_ssi_fiq_start + .global imx_ssi_fiq_end + .global imx_ssi_fiq_base + .global imx_ssi_fiq_rx_buffer + .global imx_ssi_fiq_tx_buffer + +/* + * imx_ssi_fiq_start is _intentionally_ not marked as a function symbol + * using ENDPROC(). imx_ssi_fiq_start and imx_ssi_fiq_end are used to + * mark the function body so that it can be copied to the FIQ vector in + * the vectors page. imx_ssi_fiq_start should only be called as the result + * of an FIQ: calling it directly will not work. + */ +imx_ssi_fiq_start: + ldr r12, .L_imx_ssi_fiq_base + + /* TX */ + ldr r13, .L_imx_ssi_fiq_tx_buffer + + /* shall we send? */ + ldr r11, [r12, #SSI_SIER] + tst r11, #SSI_SIER_TFE0_EN + beq 1f + + /* TX FIFO empty? */ + ldr r11, [r12, #SSI_SISR] + tst r11, #SSI_SISR_TFE0 + beq 1f + + mov r10, #0x10000 + sub r10, #1 + and r10, r10, r8 /* r10: current buffer offset */ + + add r13, r13, r10 + + ldrh r11, [r13] + strh r11, [r12, #SSI_STX0] + + ldrh r11, [r13, #2] + strh r11, [r12, #SSI_STX0] + + ldrh r11, [r13, #4] + strh r11, [r12, #SSI_STX0] + + ldrh r11, [r13, #6] + strh r11, [r12, #SSI_STX0] + + add r10, #8 + lsr r11, r8, #16 /* r11: buffer size */ + cmp r10, r11 + lslgt r8, r11, #16 + addle r8, #8 +1: + /* RX */ + + /* shall we receive? */ + ldr r11, [r12, #SSI_SIER] + tst r11, #SSI_SIER_RFF0_EN + beq 1f + + /* RX FIFO full? */ + ldr r11, [r12, #SSI_SISR] + tst r11, #SSI_SISR_RFF0 + beq 1f + + ldr r13, .L_imx_ssi_fiq_rx_buffer + + mov r10, #0x10000 + sub r10, #1 + and r10, r10, r9 /* r10: current buffer offset */ + + add r13, r13, r10 + + ldr r11, [r12, #SSI_SACNT] + tst r11, #SSI_SACNT_AC97EN + + ldr r11, [r12, #SSI_SRX0] + strh r11, [r13] + + ldr r11, [r12, #SSI_SRX0] + strh r11, [r13, #2] + + /* dummy read to skip slot 12 */ + ldrne r11, [r12, #SSI_SRX0] + + ldr r11, [r12, #SSI_SRX0] + strh r11, [r13, #4] + + ldr r11, [r12, #SSI_SRX0] + strh r11, [r13, #6] + + /* dummy read to skip slot 12 */ + ldrne r11, [r12, #SSI_SRX0] + + add r10, #8 + lsr r11, r9, #16 /* r11: buffer size */ + cmp r10, r11 + lslgt r9, r11, #16 + addle r9, #8 + +1: + @ return from FIQ + subs pc, lr, #4 + + .align +.L_imx_ssi_fiq_base: +imx_ssi_fiq_base: + .word 0x0 +.L_imx_ssi_fiq_rx_buffer: +imx_ssi_fiq_rx_buffer: + .word 0x0 +.L_imx_ssi_fiq_tx_buffer: +imx_ssi_fiq_tx_buffer: + .word 0x0 +.L_imx_ssi_fiq_end: +imx_ssi_fiq_end: + diff --git a/arch/arm/mach-imx/suspend-imx53.S b/arch/arm/mach-imx/suspend-imx53.S new file mode 100644 index 000000000..f12d24104 --- /dev/null +++ b/arch/arm/mach-imx/suspend-imx53.S @@ -0,0 +1,139 @@ +/* + * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. + */ +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/linkage.h> + +#define M4IF_MCR0_OFFSET (0x008C) +#define M4IF_MCR0_FDVFS (0x1 << 11) +#define M4IF_MCR0_FDVACK (0x1 << 27) + + .align 3 + +/* + * ==================== low level suspend ==================== + * + * On entry + * r0: pm_info structure address; + * + * suspend ocram space layout: + * ======================== high address ====================== + * . + * . + * . + * ^ + * ^ + * ^ + * imx53_suspend code + * PM_INFO structure(imx5_cpu_suspend_info) + * ======================== low address ======================= + */ + +/* Offsets of members of struct imx5_cpu_suspend_info */ +#define SUSPEND_INFO_MX53_M4IF_V_OFFSET 0x0 +#define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET 0x4 +#define SUSPEND_INFO_MX53_IO_COUNT_OFFSET 0x8 +#define SUSPEND_INFO_MX53_IO_STATE_OFFSET 0xc + +ENTRY(imx53_suspend) + stmfd sp!, {r4,r5,r6,r7} + + /* Save pad config */ + ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET] + cmp r1, #0 + beq skip_pad_conf_1 + + add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET + ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET] + +1: + ldr r5, [r2], #12 /* IOMUXC register offset */ + ldr r6, [r3, r5] /* current value */ + str r6, [r2], #4 /* save area */ + subs r1, r1, #1 + bne 1b + +skip_pad_conf_1: + /* Set FDVFS bit of M4IF_MCR0 to request DDR to enter self-refresh */ + ldr r1, [r0, #SUSPEND_INFO_MX53_M4IF_V_OFFSET] + ldr r2,[r1, #M4IF_MCR0_OFFSET] + orr r2, r2, #M4IF_MCR0_FDVFS + str r2,[r1, #M4IF_MCR0_OFFSET] + + /* Poll FDVACK bit of M4IF_MCR to wait for DDR to enter self-refresh */ +wait_sr_ack: + ldr r2,[r1, #M4IF_MCR0_OFFSET] + ands r2, r2, #M4IF_MCR0_FDVACK + beq wait_sr_ack + + /* Set pad config */ + ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET] + cmp r1, #0 + beq skip_pad_conf_2 + + add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET + ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET] + +2: + ldr r5, [r2], #4 /* IOMUXC register offset */ + ldr r6, [r2], #4 /* clear */ + ldr r7, [r3, r5] + bic r7, r7, r6 + ldr r6, [r2], #8 /* set */ + orr r7, r7, r6 + str r7, [r3, r5] + subs r1, r1, #1 + bne 2b + +skip_pad_conf_2: + /* Zzz, enter stop mode */ + wfi + nop + nop + nop + nop + + /* Restore pad config */ + ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET] + cmp r1, #0 + beq skip_pad_conf_3 + + add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET + ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET] + +3: + ldr r5, [r2], #12 /* IOMUXC register offset */ + ldr r6, [r2], #4 /* saved value */ + str r6, [r3, r5] + subs r1, r1, #1 + bne 3b + +skip_pad_conf_3: + /* Clear FDVFS bit of M4IF_MCR0 to request DDR to exit self-refresh */ + ldr r1, [r0, #SUSPEND_INFO_MX53_M4IF_V_OFFSET] + ldr r2,[r1, #M4IF_MCR0_OFFSET] + bic r2, r2, #M4IF_MCR0_FDVFS + str r2,[r1, #M4IF_MCR0_OFFSET] + + /* Poll FDVACK bit of M4IF_MCR to wait for DDR to exit self-refresh */ +wait_ar_ack: + ldr r2,[r1, #M4IF_MCR0_OFFSET] + ands r2, r2, #M4IF_MCR0_FDVACK + bne wait_ar_ack + + /* Restore registers */ + ldmfd sp!, {r4,r5,r6,r7} + mov pc, lr + +ENDPROC(imx53_suspend) + +ENTRY(imx53_suspend_sz) + .word . - imx53_suspend diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S new file mode 100644 index 000000000..99d2e2960 --- /dev/null +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -0,0 +1,336 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/asm-offsets.h> +#include <asm/hardware/cache-l2x0.h> +#include "hardware.h" + +/* + * ==================== low level suspend ==================== + * + * Better to follow below rules to use ARM registers: + * r0: pm_info structure address; + * r1 ~ r4: for saving pm_info members; + * r5 ~ r10: free registers; + * r11: io base address. + * + * suspend ocram space layout: + * ======================== high address ====================== + * . + * . + * . + * ^ + * ^ + * ^ + * imx6_suspend code + * PM_INFO structure(imx6_cpu_pm_info) + * ======================== low address ======================= + */ + +/* + * Below offsets are based on struct imx6_cpu_pm_info + * which defined in arch/arm/mach-imx/pm-imx6q.c, this + * structure contains necessary pm info for low level + * suspend related code. + */ +#define PM_INFO_PBASE_OFFSET 0x0 +#define PM_INFO_RESUME_ADDR_OFFSET 0x4 +#define PM_INFO_DDR_TYPE_OFFSET 0x8 +#define PM_INFO_PM_INFO_SIZE_OFFSET 0xC +#define PM_INFO_MX6Q_MMDC_P_OFFSET 0x10 +#define PM_INFO_MX6Q_MMDC_V_OFFSET 0x14 +#define PM_INFO_MX6Q_SRC_P_OFFSET 0x18 +#define PM_INFO_MX6Q_SRC_V_OFFSET 0x1C +#define PM_INFO_MX6Q_IOMUXC_P_OFFSET 0x20 +#define PM_INFO_MX6Q_IOMUXC_V_OFFSET 0x24 +#define PM_INFO_MX6Q_CCM_P_OFFSET 0x28 +#define PM_INFO_MX6Q_CCM_V_OFFSET 0x2C +#define PM_INFO_MX6Q_GPC_P_OFFSET 0x30 +#define PM_INFO_MX6Q_GPC_V_OFFSET 0x34 +#define PM_INFO_MX6Q_L2_P_OFFSET 0x38 +#define PM_INFO_MX6Q_L2_V_OFFSET 0x3C +#define PM_INFO_MMDC_IO_NUM_OFFSET 0x40 +#define PM_INFO_MMDC_IO_VAL_OFFSET 0x44 + +#define MX6Q_SRC_GPR1 0x20 +#define MX6Q_SRC_GPR2 0x24 +#define MX6Q_MMDC_MAPSR 0x404 +#define MX6Q_MMDC_MPDGCTRL0 0x83c +#define MX6Q_GPC_IMR1 0x08 +#define MX6Q_GPC_IMR2 0x0c +#define MX6Q_GPC_IMR3 0x10 +#define MX6Q_GPC_IMR4 0x14 +#define MX6Q_CCM_CCR 0x0 + + .align 3 + .arm + + .macro sync_l2_cache + + /* sync L2 cache to drain L2's buffers to DRAM. */ +#ifdef CONFIG_CACHE_L2X0 + ldr r11, [r0, #PM_INFO_MX6Q_L2_V_OFFSET] + teq r11, #0 + beq 6f + mov r6, #0x0 + str r6, [r11, #L2X0_CACHE_SYNC] +1: + ldr r6, [r11, #L2X0_CACHE_SYNC] + ands r6, r6, #0x1 + bne 1b +6: +#endif + + .endm + + .macro resume_mmdc + + /* restore MMDC IO */ + cmp r5, #0x0 + ldreq r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] + ldrne r11, [r0, #PM_INFO_MX6Q_IOMUXC_P_OFFSET] + + ldr r6, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] + ldr r7, =PM_INFO_MMDC_IO_VAL_OFFSET + add r7, r7, r0 +1: + ldr r8, [r7], #0x4 + ldr r9, [r7], #0x4 + str r9, [r11, r8] + subs r6, r6, #0x1 + bne 1b + + cmp r5, #0x0 + ldreq r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET] + ldrne r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET] + + cmp r3, #IMX_DDR_TYPE_LPDDR2 + bne 4f + + /* reset read FIFO, RST_RD_FIFO */ + ldr r7, =MX6Q_MMDC_MPDGCTRL0 + ldr r6, [r11, r7] + orr r6, r6, #(1 << 31) + str r6, [r11, r7] +2: + ldr r6, [r11, r7] + ands r6, r6, #(1 << 31) + bne 2b + + /* reset FIFO a second time */ + ldr r6, [r11, r7] + orr r6, r6, #(1 << 31) + str r6, [r11, r7] +3: + ldr r6, [r11, r7] + ands r6, r6, #(1 << 31) + bne 3b +4: + /* let DDR out of self-refresh */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + bic r7, r7, #(1 << 21) + str r7, [r11, #MX6Q_MMDC_MAPSR] +5: + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + ands r7, r7, #(1 << 25) + bne 5b + + /* enable DDR auto power saving */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + bic r7, r7, #0x1 + str r7, [r11, #MX6Q_MMDC_MAPSR] + + .endm + +ENTRY(imx6_suspend) + ldr r1, [r0, #PM_INFO_PBASE_OFFSET] + ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET] + ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET] + ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET] + + /* + * counting the resume address in iram + * to set it in SRC register. + */ + ldr r6, =imx6_suspend + ldr r7, =resume + sub r7, r7, r6 + add r8, r1, r4 + add r9, r8, r7 + + /* + * make sure TLB contain the addr we want, + * as we will access them after MMDC IO floated. + */ + + ldr r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET] + ldr r6, [r11, #0x0] + ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] + ldr r6, [r11, #0x0] + ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] + ldr r6, [r11, #0x0] + + /* use r11 to store the IO address */ + ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET] + /* store physical resume addr and pm_info address. */ + str r9, [r11, #MX6Q_SRC_GPR1] + str r1, [r11, #MX6Q_SRC_GPR2] + + /* need to sync L2 cache before DSM. */ + sync_l2_cache + + ldr r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET] + /* + * put DDR explicitly into self-refresh and + * disable automatic power savings. + */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + orr r7, r7, #0x1 + str r7, [r11, #MX6Q_MMDC_MAPSR] + + /* make the DDR explicitly enter self-refresh. */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + orr r7, r7, #(1 << 21) + str r7, [r11, #MX6Q_MMDC_MAPSR] + +poll_dvfs_set: + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + ands r7, r7, #(1 << 25) + beq poll_dvfs_set + + ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] + ldr r6, =0x0 + ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] + ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET + add r8, r8, r0 + /* LPDDR2's last 3 IOs need special setting */ + cmp r3, #IMX_DDR_TYPE_LPDDR2 + subeq r7, r7, #0x3 +set_mmdc_io_lpm: + ldr r9, [r8], #0x8 + str r6, [r11, r9] + subs r7, r7, #0x1 + bne set_mmdc_io_lpm + + cmp r3, #IMX_DDR_TYPE_LPDDR2 + bne set_mmdc_io_lpm_done + ldr r6, =0x1000 + ldr r9, [r8], #0x8 + str r6, [r11, r9] + ldr r9, [r8], #0x8 + str r6, [r11, r9] + ldr r6, =0x80000 + ldr r9, [r8] + str r6, [r11, r9] +set_mmdc_io_lpm_done: + + /* + * mask all GPC interrupts before + * enabling the RBC counters to + * avoid the counter starting too + * early if an interupt is already + * pending. + */ + ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] + ldr r6, [r11, #MX6Q_GPC_IMR1] + ldr r7, [r11, #MX6Q_GPC_IMR2] + ldr r8, [r11, #MX6Q_GPC_IMR3] + ldr r9, [r11, #MX6Q_GPC_IMR4] + + ldr r10, =0xffffffff + str r10, [r11, #MX6Q_GPC_IMR1] + str r10, [r11, #MX6Q_GPC_IMR2] + str r10, [r11, #MX6Q_GPC_IMR3] + str r10, [r11, #MX6Q_GPC_IMR4] + + /* + * enable the RBC bypass counter here + * to hold off the interrupts. RBC counter + * = 32 (1ms), Minimum RBC delay should be + * 400us for the analog LDOs to power down. + */ + ldr r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET] + ldr r10, [r11, #MX6Q_CCM_CCR] + bic r10, r10, #(0x3f << 21) + orr r10, r10, #(0x20 << 21) + str r10, [r11, #MX6Q_CCM_CCR] + + /* enable the counter. */ + ldr r10, [r11, #MX6Q_CCM_CCR] + orr r10, r10, #(0x1 << 27) + str r10, [r11, #MX6Q_CCM_CCR] + + /* unmask all the GPC interrupts. */ + ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] + str r6, [r11, #MX6Q_GPC_IMR1] + str r7, [r11, #MX6Q_GPC_IMR2] + str r8, [r11, #MX6Q_GPC_IMR3] + str r9, [r11, #MX6Q_GPC_IMR4] + + /* + * now delay for a short while (3usec) + * ARM is at 1GHz at this point + * so a short loop should be enough. + * this delay is required to ensure that + * the RBC counter can start counting in + * case an interrupt is already pending + * or in case an interrupt arrives just + * as ARM is about to assert DSM_request. + */ + ldr r6, =2000 +rbc_loop: + subs r6, r6, #0x1 + bne rbc_loop + + /* Zzz, enter stop mode */ + wfi + nop + nop + nop + nop + + /* + * run to here means there is pending + * wakeup source, system should auto + * resume, we need to restore MMDC IO first + */ + mov r5, #0x0 + resume_mmdc + + /* return to suspend finish */ + ret lr + +resume: + /* invalidate L1 I-cache first */ + mov r6, #0x0 + mcr p15, 0, r6, c7, c5, 0 + mcr p15, 0, r6, c7, c5, 6 + /* enable the Icache and branch prediction */ + mov r6, #0x1800 + mcr p15, 0, r6, c1, c0, 0 + isb + + /* get physical resume address from pm_info. */ + ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET] + /* clear core0's entry and parameter */ + ldr r11, [r0, #PM_INFO_MX6Q_SRC_P_OFFSET] + mov r7, #0x0 + str r7, [r11, #MX6Q_SRC_GPR1] + str r7, [r11, #MX6Q_SRC_GPR2] + + ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET] + mov r5, #0x1 + resume_mmdc + + ret lr +ENDPROC(imx6_suspend) diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c new file mode 100644 index 000000000..c06af650e --- /dev/null +++ b/arch/arm/mach-imx/system.c @@ -0,0 +1,127 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <asm/system_misc.h> +#include <asm/proc-fns.h> +#include <asm/mach-types.h> +#include <asm/hardware/cache-l2x0.h> + +#include "common.h" +#include "hardware.h" + +static void __iomem *wdog_base; +static struct clk *wdog_clk; +static int wcr_enable = (1 << 2); + +/* + * Reset the system. It is called by machine_restart(). + */ +void mxc_restart(enum reboot_mode mode, const char *cmd) +{ + if (!wdog_base) + goto reset_fallback; + + if (!IS_ERR(wdog_clk)) + clk_enable(wdog_clk); + + /* Assert SRS signal */ + imx_writew(wcr_enable, wdog_base); + /* + * Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be + * written twice), we add another two writes to ensure there must be at + * least two writes happen in the same one 32kHz clock period. We save + * the target check here, since the writes shouldn't be a huge burden + * for other platforms. + */ + imx_writew(wcr_enable, wdog_base); + imx_writew(wcr_enable, wdog_base); + + /* wait for reset to assert... */ + mdelay(500); + + pr_err("%s: Watchdog reset failed to assert reset\n", __func__); + + /* delay to allow the serial port to show the message */ + mdelay(50); + +reset_fallback: + /* we'll take a jump through zero as a poor second */ + soft_restart(0); +} + +void __init mxc_arch_reset_init(void __iomem *base) +{ + wdog_base = base; + + wdog_clk = clk_get_sys("imx2-wdt.0", NULL); + if (IS_ERR(wdog_clk)) + pr_warn("%s: failed to get wdog clock\n", __func__); + else + clk_prepare(wdog_clk); +} + +#ifdef CONFIG_SOC_IMX1 +void __init imx1_reset_init(void __iomem *base) +{ + wcr_enable = (1 << 0); + mxc_arch_reset_init(base); +} +#endif + +#ifdef CONFIG_CACHE_L2X0 +void __init imx_init_l2cache(void) +{ + void __iomem *l2x0_base; + struct device_node *np; + unsigned int val; + + np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); + if (!np) + return; + + l2x0_base = of_iomap(np, 0); + if (!l2x0_base) + goto put_node; + + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { + /* Configure the L2 PREFETCH and POWER registers */ + val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL); + val |= L310_PREFETCH_CTRL_DBL_LINEFILL | + L310_PREFETCH_CTRL_INSTR_PREFETCH | + L310_PREFETCH_CTRL_DATA_PREFETCH; + + /* Set perfetch offset to improve performance */ + val &= ~L310_PREFETCH_CTRL_OFFSET_MASK; + val |= 15; + + writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL); + } + + iounmap(l2x0_base); +put_node: + of_node_put(np); +} +#endif diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c new file mode 100644 index 000000000..4ca37c3f1 --- /dev/null +++ b/arch/arm/mach-imx/tzic.c @@ -0,0 +1,226 @@ +/* + * Copyright (C)2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/irqchip.h> +#include <linux/irqdomain.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <asm/mach/irq.h> +#include <asm/exception.h> + +#include "common.h" +#include "hardware.h" +#include "irq-common.h" + +/* + ***************************************** + * TZIC Registers * + ***************************************** + */ + +#define TZIC_INTCNTL 0x0000 /* Control register */ +#define TZIC_INTTYPE 0x0004 /* Controller Type register */ +#define TZIC_IMPID 0x0008 /* Distributor Implementer Identification */ +#define TZIC_PRIOMASK 0x000C /* Priority Mask Reg */ +#define TZIC_SYNCCTRL 0x0010 /* Synchronizer Control register */ +#define TZIC_DSMINT 0x0014 /* DSM interrupt Holdoffregister */ +#define TZIC_INTSEC0(i) (0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */ +#define TZIC_ENSET0(i) (0x0100 + ((i) << 2)) /* Enable Set Reg 0 */ +#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */ +#define TZIC_SRCSET0 0x0200 /* Source Set Register 0 */ +#define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */ +#define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */ +#define TZIC_PND0 0x0D00 /* Pending Register 0 */ +#define TZIC_HIPND(i) (0x0D80+ ((i) << 2)) /* High Priority Pending Register */ +#define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */ +#define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */ +#define TZIC_ID0 0x0FD0 /* Indentification Register 0 */ + +static void __iomem *tzic_base; +static struct irq_domain *domain; + +#define TZIC_NUM_IRQS 128 + +#ifdef CONFIG_FIQ +static int tzic_set_irq_fiq(unsigned int hwirq, unsigned int type) +{ + unsigned int index, mask, value; + + index = hwirq >> 5; + if (unlikely(index >= 4)) + return -EINVAL; + mask = 1U << (hwirq & 0x1F); + + value = imx_readl(tzic_base + TZIC_INTSEC0(index)) | mask; + if (type) + value &= ~mask; + imx_writel(value, tzic_base + TZIC_INTSEC0(index)); + + return 0; +} +#else +#define tzic_set_irq_fiq NULL +#endif + +#ifdef CONFIG_PM +static void tzic_irq_suspend(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + int idx = d->hwirq >> 5; + + imx_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx)); +} + +static void tzic_irq_resume(struct irq_data *d) +{ + int idx = d->hwirq >> 5; + + imx_writel(imx_readl(tzic_base + TZIC_ENSET0(idx)), + tzic_base + TZIC_WAKEUP0(idx)); +} + +#else +#define tzic_irq_suspend NULL +#define tzic_irq_resume NULL +#endif + +static struct mxc_extra_irq tzic_extra_irq = { +#ifdef CONFIG_FIQ + .set_irq_fiq = tzic_set_irq_fiq, +#endif +}; + +static __init void tzic_init_gc(int idx, unsigned int irq_start) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base, + handle_level_irq); + gc->private = &tzic_extra_irq; + gc->wake_enabled = IRQ_MSK(32); + + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_disable_reg; + ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.irq_set_wake = irq_gc_set_wake; + ct->chip.irq_suspend = tzic_irq_suspend; + ct->chip.irq_resume = tzic_irq_resume; + ct->regs.disable = TZIC_ENCLEAR0(idx); + ct->regs.enable = TZIC_ENSET0(idx); + + irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); +} + +static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) +{ + u32 stat; + int i, irqofs, handled; + + do { + handled = 0; + + for (i = 0; i < 4; i++) { + stat = imx_readl(tzic_base + TZIC_HIPND(i)) & + imx_readl(tzic_base + TZIC_INTSEC0(i)); + + while (stat) { + handled = 1; + irqofs = fls(stat) - 1; + handle_domain_irq(domain, irqofs + i * 32, regs); + stat &= ~(1 << irqofs); + } + } + } while (handled); +} + +/* + * This function initializes the TZIC hardware and disables all the + * interrupts. It registers the interrupt enable and disable functions + * to the kernel for each interrupt source. + */ +static int __init tzic_init_dt(struct device_node *np, struct device_node *p) +{ + int irq_base; + int i; + + tzic_base = of_iomap(np, 0); + WARN_ON(!tzic_base); + + /* put the TZIC into the reset value with + * all interrupts disabled + */ + i = imx_readl(tzic_base + TZIC_INTCNTL); + + imx_writel(0x80010001, tzic_base + TZIC_INTCNTL); + imx_writel(0x1f, tzic_base + TZIC_PRIOMASK); + imx_writel(0x02, tzic_base + TZIC_SYNCCTRL); + + for (i = 0; i < 4; i++) + imx_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i)); + + /* disable all interrupts */ + for (i = 0; i < 4; i++) + imx_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i)); + + /* all IRQ no FIQ Warning :: No selection */ + + irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id()); + WARN_ON(irq_base < 0); + + domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = 0; i < 4; i++, irq_base += 32) + tzic_init_gc(i, irq_base); + + set_handle_irq(tzic_handle_irq); + +#ifdef CONFIG_FIQ + /* Initialize FIQ */ + init_FIQ(FIQ_START); +#endif + + pr_info("TrustZone Interrupt Controller (TZIC) initialized\n"); + + return 0; +} +IRQCHIP_DECLARE(tzic, "fsl,tzic", tzic_init_dt); + +/** + * tzic_enable_wake() - enable wakeup interrupt + * + * @return 0 if successful; non-zero otherwise + * + * This function provides an interrupt synchronization point that is required + * by tzic enabled platforms before entering imx specific low power modes (ie, + * those low power modes beyond the WAIT_CLOCKED basic ARM WFI only mode). + */ +int tzic_enable_wake(void) +{ + unsigned int i; + + imx_writel(1, tzic_base + TZIC_DSMINT); + if (unlikely(imx_readl(tzic_base + TZIC_DSMINT) == 0)) + return -EAGAIN; + + for (i = 0; i < 4; i++) + imx_writel(imx_readl(tzic_base + TZIC_ENSET0(i)), + tzic_base + TZIC_WAKEUP0(i)); + + return 0; +} diff --git a/arch/arm/mach-imx/ulpi.h b/arch/arm/mach-imx/ulpi.h new file mode 100644 index 000000000..b367902c9 --- /dev/null +++ b/arch/arm/mach-imx/ulpi.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __MACH_ULPI_H +#define __MACH_ULPI_H + +#include <linux/usb/ulpi.h> + +#ifdef CONFIG_USB_ULPI_VIEWPORT +static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) +{ + return otg_ulpi_create(&ulpi_viewport_access_ops, flags); +} +#else +static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) +{ + return NULL; +} +#endif + +#endif /* __MACH_ULPI_H */ + |