diff options
Diffstat (limited to 'arch/arm/mach-omap2/sleep44xx.S')
| -rw-r--r-- | arch/arm/mach-omap2/sleep44xx.S | 388 |
1 files changed, 388 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S new file mode 100644 index 000000000..0cae3b070 --- /dev/null +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -0,0 +1,388 @@ +/* + * OMAP44xx sleep code. + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/smp_scu.h> +#include <asm/memory.h> +#include <asm/hardware/cache-l2x0.h> + +#include "omap-secure.h" + +#include "common.h" +#include "omap44xx.h" +#include "omap4-sar-layout.h" + +#if defined(CONFIG_SMP) && defined(CONFIG_PM) + +.macro DO_SMC + dsb + smc #0 + dsb +.endm + +#ifdef CONFIG_ARCH_OMAP4 + +/* + * ============================= + * == CPU suspend finisher == + * ============================= + * + * void omap4_finish_suspend(unsigned long cpu_state) + * + * This function code saves the CPU context and performs the CPU + * power down sequence. Calling WFI effectively changes the CPU + * power domains states to the desired target power state. + * + * @cpu_state : contains context save state (r0) + * 0 - No context lost + * 1 - CPUx L1 and logic lost: MPUSS CSWR + * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR + * 3 - CPUx L1 and logic lost + GIC + L2 lost: MPUSS OFF + * @return: This function never returns for CPU OFF and DORMANT power states. + * Post WFI, CPU transitions to DORMANT or OFF power state and on wake-up + * from this follows a full CPU reset path via ROM code to CPU restore code. + * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. + * It returns to the caller for CPU INACTIVE and ON power states or in case + * CPU failed to transition to targeted OFF/DORMANT state. + * + * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save + * stack frame and it expects the caller to take care of it. Hence the entire + * stack frame is saved to avoid possible stack corruption. + */ +ENTRY(omap4_finish_suspend) + stmfd sp!, {r4-r12, lr} + cmp r0, #0x0 + beq do_WFI @ No lowpower state, jump to WFI + + /* + * Flush all data from the L1 data cache before disabling + * SCTLR.C bit. + */ + bl omap4_get_sar_ram_base + ldr r9, [r0, #OMAP_TYPE_OFFSET] + cmp r9, #0x1 @ Check for HS device + bne skip_secure_l1_clean + mov r0, #SCU_PM_NORMAL + mov r1, #0xFF @ clean seucre L1 + stmfd r13!, {r4-r12, r14} + ldr r12, =OMAP4_MON_SCU_PWR_INDEX + DO_SMC + ldmfd r13!, {r4-r12, r14} +skip_secure_l1_clean: + bl v7_flush_dcache_all + + /* + * Clear the SCTLR.C bit to prevent further data cache + * allocation. Clearing SCTLR.C would make all the data accesses + * strongly ordered and would not hit the cache. + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #(1 << 2) @ Disable the C bit + mcr p15, 0, r0, c1, c0, 0 + isb + + bl v7_invalidate_l1 + + /* + * Switch the CPU from Symmetric Multiprocessing (SMP) mode + * to AsymmetricMultiprocessing (AMP) mode by programming + * the SCU power status to DORMANT or OFF mode. + * This enables the CPU to be taken out of coherency by + * preventing the CPU from receiving cache, TLB, or BTB + * maintenance operations broadcast by other CPUs in the cluster. + */ + bl omap4_get_sar_ram_base + mov r8, r0 + ldr r9, [r8, #OMAP_TYPE_OFFSET] + cmp r9, #0x1 @ Check for HS device + bne scu_gp_set + mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR + ands r0, r0, #0x0f + ldreq r0, [r8, #SCU_OFFSET0] + ldrne r0, [r8, #SCU_OFFSET1] + mov r1, #0x00 + stmfd r13!, {r4-r12, r14} + ldr r12, =OMAP4_MON_SCU_PWR_INDEX + DO_SMC + ldmfd r13!, {r4-r12, r14} + b skip_scu_gp_set +scu_gp_set: + mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR + ands r0, r0, #0x0f + ldreq r1, [r8, #SCU_OFFSET0] + ldrne r1, [r8, #SCU_OFFSET1] + bl omap4_get_scu_base + bl scu_power_mode +skip_scu_gp_set: + mrc p15, 0, r0, c1, c1, 2 @ Read NSACR data + tst r0, #(1 << 18) + mrcne p15, 0, r0, c1, c0, 1 + bicne r0, r0, #(1 << 6) @ Disable SMP bit + mcrne p15, 0, r0, c1, c0, 1 + isb + dsb +#ifdef CONFIG_CACHE_L2X0 + /* + * Clean and invalidate the L2 cache. + * Common cache-l2x0.c functions can't be used here since it + * uses spinlocks. We are out of coherency here with data cache + * disabled. The spinlock implementation uses exclusive load/store + * instruction which can fail without data cache being enabled. + * OMAP4 hardware doesn't support exclusive monitor which can + * overcome exclusive access issue. Because of this, CPU can + * lead to deadlock. + */ + bl omap4_get_sar_ram_base + mov r8, r0 + mrc p15, 0, r5, c0, c0, 5 @ Read MPIDR + ands r5, r5, #0x0f + ldreq r0, [r8, #L2X0_SAVE_OFFSET0] @ Retrieve L2 state from SAR + ldrne r0, [r8, #L2X0_SAVE_OFFSET1] @ memory. + cmp r0, #3 + bne do_WFI +#ifdef CONFIG_PL310_ERRATA_727915 + mov r0, #0x03 + mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX + DO_SMC +#endif + bl omap4_get_l2cache_base + mov r2, r0 + ldr r0, =0xffff + str r0, [r2, #L2X0_CLEAN_INV_WAY] +wait: + ldr r0, [r2, #L2X0_CLEAN_INV_WAY] + ldr r1, =0xffff + ands r0, r0, r1 + bne wait +#ifdef CONFIG_PL310_ERRATA_727915 + mov r0, #0x00 + mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX + DO_SMC +#endif +l2x_sync: + bl omap4_get_l2cache_base + mov r2, r0 + mov r0, #0x0 + str r0, [r2, #L2X0_CACHE_SYNC] +sync: + ldr r0, [r2, #L2X0_CACHE_SYNC] + ands r0, r0, #0x1 + bne sync +#endif + +do_WFI: + bl omap_do_wfi + + /* + * CPU is here when it failed to enter OFF/DORMANT or + * no low power state was attempted. + */ + mrc p15, 0, r0, c1, c0, 0 + tst r0, #(1 << 2) @ Check C bit enabled? + orreq r0, r0, #(1 << 2) @ Enable the C bit + mcreq p15, 0, r0, c1, c0, 0 + isb + + /* + * Ensure the CPU power state is set to NORMAL in + * SCU power state so that CPU is back in coherency. + * In non-coherent mode CPU can lock-up and lead to + * system deadlock. + */ + mrc p15, 0, r0, c1, c0, 1 + tst r0, #(1 << 6) @ Check SMP bit enabled? + orreq r0, r0, #(1 << 6) + mcreq p15, 0, r0, c1, c0, 1 + isb + bl omap4_get_sar_ram_base + mov r8, r0 + ldr r9, [r8, #OMAP_TYPE_OFFSET] + cmp r9, #0x1 @ Check for HS device + bne scu_gp_clear + mov r0, #SCU_PM_NORMAL + mov r1, #0x00 + stmfd r13!, {r4-r12, r14} + ldr r12, =OMAP4_MON_SCU_PWR_INDEX + DO_SMC + ldmfd r13!, {r4-r12, r14} + b skip_scu_gp_clear +scu_gp_clear: + bl omap4_get_scu_base + mov r1, #SCU_PM_NORMAL + bl scu_power_mode +skip_scu_gp_clear: + isb + dsb + ldmfd sp!, {r4-r12, pc} +ENDPROC(omap4_finish_suspend) + +/* + * ============================ + * == CPU resume entry point == + * ============================ + * + * void omap4_cpu_resume(void) + * + * ROM code jumps to this function while waking up from CPU + * OFF or DORMANT state. Physical address of the function is + * stored in the SAR RAM while entering to OFF or DORMANT mode. + * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. + */ +ENTRY(omap4_cpu_resume) + /* + * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device. + * OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA + * init and for CPU1, a secure PPA API provided. CPU0 must be ON + * while executing NS_SMP API on CPU1 and PPA version must be 1.4.0+. + * OMAP443X GP devices- SMP bit isn't accessible. + * OMAP446X GP devices - SMP bit access is enabled on both CPUs. + */ + ldr r8, =OMAP44XX_SAR_RAM_BASE + ldr r9, [r8, #OMAP_TYPE_OFFSET] + cmp r9, #0x1 @ Skip if GP device + bne skip_ns_smp_enable + mrc p15, 0, r0, c0, c0, 5 + ands r0, r0, #0x0f + beq skip_ns_smp_enable +ppa_actrl_retry: + mov r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX + adr r1, ppa_zero_params_offset + ldr r3, [r1] + add r3, r3, r1 @ Pointer to ppa_zero_params + mov r1, #0x0 @ Process ID + mov r2, #0x4 @ Flag + mov r6, #0xff + mov r12, #0x00 @ Secure Service ID + DO_SMC + cmp r0, #0x0 @ API returns 0 on success. + beq enable_smp_bit + b ppa_actrl_retry +enable_smp_bit: + mrc p15, 0, r0, c1, c0, 1 + tst r0, #(1 << 6) @ Check SMP bit enabled? + orreq r0, r0, #(1 << 6) + mcreq p15, 0, r0, c1, c0, 1 + isb +skip_ns_smp_enable: +#ifdef CONFIG_CACHE_L2X0 + /* + * Restore the L2 AUXCTRL and enable the L2 cache. + * OMAP4_MON_L2X0_AUXCTRL_INDEX = Program the L2X0 AUXCTRL + * OMAP4_MON_L2X0_CTRL_INDEX = Enable the L2 using L2X0 CTRL + * register r0 contains value to be programmed. + * L2 cache is already invalidate by ROM code as part + * of MPUSS OFF wakeup path. + */ + ldr r2, =OMAP44XX_L2CACHE_BASE + ldr r0, [r2, #L2X0_CTRL] + and r0, #0x0f + cmp r0, #1 + beq skip_l2en @ Skip if already enabled + ldr r3, =OMAP44XX_SAR_RAM_BASE + ldr r1, [r3, #OMAP_TYPE_OFFSET] + cmp r1, #0x1 @ Check for HS device + bne set_gp_por + ldr r0, =OMAP4_PPA_L2_POR_INDEX + ldr r1, =OMAP44XX_SAR_RAM_BASE + ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET] + adr r1, ppa_por_params_offset + ldr r3, [r1] + add r3, r3, r1 @ Pointer to ppa_por_params + str r4, [r3, #0x04] + mov r1, #0x0 @ Process ID + mov r2, #0x4 @ Flag + mov r6, #0xff + mov r12, #0x00 @ Secure Service ID + DO_SMC + b set_aux_ctrl +set_gp_por: + ldr r1, =OMAP44XX_SAR_RAM_BASE + ldr r0, [r1, #L2X0_PREFETCH_CTRL_OFFSET] + ldr r12, =OMAP4_MON_L2X0_PREFETCH_INDEX @ Setup L2 PREFETCH + DO_SMC +set_aux_ctrl: + ldr r1, =OMAP44XX_SAR_RAM_BASE + ldr r0, [r1, #L2X0_AUXCTRL_OFFSET] + ldr r12, =OMAP4_MON_L2X0_AUXCTRL_INDEX @ Setup L2 AUXCTRL + DO_SMC + mov r0, #0x1 + ldr r12, =OMAP4_MON_L2X0_CTRL_INDEX @ Enable L2 cache + DO_SMC +skip_l2en: +#endif + + b cpu_resume @ Jump to generic resume +ppa_por_params_offset: + .long ppa_por_params - . +ENDPROC(omap4_cpu_resume) +#endif /* CONFIG_ARCH_OMAP4 */ + +#endif /* defined(CONFIG_SMP) && defined(CONFIG_PM) */ + +ENTRY(omap_do_wfi) + stmfd sp!, {lr} +#ifdef CONFIG_OMAP_INTERCONNECT_BARRIER + /* Drain interconnect write buffers. */ + bl omap_interconnect_sync +#endif + + /* + * Execute an ISB instruction to ensure that all of the + * CP15 register changes have been committed. + */ + isb + + /* + * Execute a barrier instruction to ensure that all cache, + * TLB and branch predictor maintenance operations issued + * by any CPU in the cluster have completed. + */ + dsb + dmb + + /* + * Execute a WFI instruction and wait until the + * STANDBYWFI output is asserted to indicate that the + * CPU is in idle and low power state. CPU can specualatively + * prefetch the instructions so add NOPs after WFI. Sixteen + * NOPs as per Cortex-A9 pipeline. + */ + wfi @ Wait For Interrupt + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + + ldmfd sp!, {pc} +ppa_zero_params_offset: + .long ppa_zero_params - . +ENDPROC(omap_do_wfi) + + .data + .align 2 +ppa_zero_params: + .word 0 + +ppa_por_params: + .word 1, 0 |