diff options
Diffstat (limited to 'arch/arm/mach-sa1100/include/mach/h3xxx.h')
| -rw-r--r-- | arch/arm/mach-sa1100/include/mach/h3xxx.h | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/arch/arm/mach-sa1100/include/mach/h3xxx.h b/arch/arm/mach-sa1100/include/mach/h3xxx.h new file mode 100644 index 000000000..603d4343f --- /dev/null +++ b/arch/arm/mach-sa1100/include/mach/h3xxx.h @@ -0,0 +1,85 @@ +/* + * Definitions for Compaq iPAQ H3100 and H3600 handheld computers + * + * (c) 2000 Compaq Computer Corporation. (Author: Jamey Hicks) + * (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_H3XXX_H_ +#define _INCLUDE_H3XXX_H_ + +#include "hardware.h" /* Gives GPIO_MAX */ + +/* Physical memory regions corresponding to chip selects */ +#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000) +#define H3600_BANK_2_PHYS SA1100_CS2_PHYS +#define H3600_BANK_4_PHYS SA1100_CS4_PHYS + +/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */ +#define H3600_EGPIO_VIRT 0xf0000000 +#define H3600_BANK_2_VIRT 0xf1000000 +#define H3600_BANK_4_VIRT 0xf3800000 + +/* + * gpiolib numbers for all iPAQs + */ +#define H3XXX_GPIO_PWR_BUTTON 0 +#define H3XXX_GPIO_PCMCIA_CD1 10 +#define H3XXX_GPIO_PCMCIA_IRQ1 11 +#define H3XXX_GPIO_PCMCIA_CD0 17 +#define H3XXX_GPIO_ACTION_BUTTON 18 +#define H3XXX_GPIO_SYS_CLK 19 +#define H3XXX_GPIO_PCMCIA_IRQ0 21 +#define H3XXX_GPIO_COM_DCD 23 +#define H3XXX_GPIO_OPTION 24 +#define H3XXX_GPIO_COM_CTS 25 +#define H3XXX_GPIO_COM_RTS 26 + +/* machine-specific gpios */ + +#define H3100_GPIO_BT_ON 2 +#define H3100_GPIO_QMUTE 4 +#define H3100_GPIO_LCD_3V_ON 5 +#define H3100_GPIO_AUD_ON 6 +#define H3100_GPIO_AUD_PWR_ON 7 +#define H3100_GPIO_IR_ON 8 +#define H3100_GPIO_IR_FSEL 9 + +#define H3600_GPIO_CLK_SET0 12 /* audio sample rate clock generator */ +#define H3600_GPIO_CLK_SET1 13 +#define H3600_GPIO_SOFT_RESET 20 /* also known as BATT_FAULT */ +#define H3600_GPIO_OPT_LOCK 22 +#define H3600_GPIO_OPT_DET 27 + + +/* H3100 / 3600 EGPIO pins */ +#define H3XXX_EGPIO_BASE (GPIO_MAX + 1) + +#define H3XXX_EGPIO_VPP_ON (H3XXX_EGPIO_BASE + 0) +#define H3XXX_EGPIO_CARD_RESET (H3XXX_EGPIO_BASE + 1) /* reset the attached pcmcia/compactflash card. active high. */ +#define H3XXX_EGPIO_OPT_RESET (H3XXX_EGPIO_BASE + 2) /* reset the attached option pack. active high. */ +#define H3XXX_EGPIO_CODEC_NRESET (H3XXX_EGPIO_BASE + 3) /* reset the onboard UDA1341. active low. */ +#define H3XXX_EGPIO_OPT_NVRAM_ON (H3XXX_EGPIO_BASE + 4) /* apply power to optionpack nvram, active high. */ +#define H3XXX_EGPIO_OPT_ON (H3XXX_EGPIO_BASE + 5) /* full power to option pack. active high. */ +#define H3XXX_EGPIO_LCD_ON (H3XXX_EGPIO_BASE + 6) /* enable 3.3V to LCD. active high. */ +#define H3XXX_EGPIO_RS232_ON (H3XXX_EGPIO_BASE + 7) /* UART3 transceiver force on. Active high. */ + +/* H3600 only EGPIO pins */ +#define H3600_EGPIO_LCD_PCI (H3XXX_EGPIO_BASE + 8) /* LCD control IC enable. active high. */ +#define H3600_EGPIO_IR_ON (H3XXX_EGPIO_BASE + 9) /* apply power to IR module. active high. */ +#define H3600_EGPIO_AUD_AMP_ON (H3XXX_EGPIO_BASE + 10) /* apply power to audio power amp. active high. */ +#define H3600_EGPIO_AUD_PWR_ON (H3XXX_EGPIO_BASE + 11) /* apply power to reset of audio circuit. active high. */ +#define H3600_EGPIO_QMUTE (H3XXX_EGPIO_BASE + 12) /* mute control for onboard UDA1341. active high. */ +#define H3600_EGPIO_IR_FSEL (H3XXX_EGPIO_BASE + 13) /* IR speed select: 1->fast, 0->slow */ +#define H3600_EGPIO_LCD_5V_ON (H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */ +#define H3600_EGPIO_LVDD_ON (H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */ + +void __init h3xxx_map_io(void); +void __init h3xxx_mach_init(void); + +#endif /* _INCLUDE_H3XXX_H_ */ |