diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm64/boot/dts/al/alpine-v2.dtsi | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/al/alpine-v2.dtsi b/arch/arm64/boot/dts/al/alpine-v2.dtsi new file mode 100644 index 000000000..5b7bef684 --- /dev/null +++ b/arch/arm64/boot/dts/al/alpine-v2.dtsi @@ -0,0 +1,236 @@ +/* + * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Antoine Tenart <antoine.tenart@free-electrons.com> + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Annapurna Labs Alpine v2"; + compatible = "al,alpine-v2"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; + }; + + sbclk: sbclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + ranges; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + }; + + gic: gic@f0100000 { + compatible = "arm,gic-v3"; + reg = <0x0 0xf0200000 0x0 0x10000>, /* GIC Dist */ + <0x0 0xf0280000 0x0 0x200000>, /* GICR */ + <0x0 0xf0100000 0x0 0x2000>, /* GICC */ + <0x0 0xf0110000 0x0 0x2000>, /* GICV */ + <0x0 0xf0120000 0x0 0x2000>; /* GICH */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + pci@fbc00000 { + compatible = "pci-host-ecam-generic"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + #interrupt-cells = <1>; + reg = <0x0 0xfbc00000 0x0 0x100000>; + interrupt-map-mask = <0xf800 0 0 7>; + /* add legacy interrupts for SATA only */ + interrupt-map = <0x4000 0 0 1 &gic 0 53 4>, + <0x4800 0 0 1 &gic 0 54 4>; + /* 32 bit non prefetchable memory space */ + ranges = <0x2000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>; + bus-range = <0x00 0x00>; + msi-parent = <&msix>; + }; + + msix: msix@fbe00000 { + compatible = "al,alpine-msix"; + reg = <0x0 0xfbe00000 0x0 0x100000>; + interrupt-controller; + msi-controller; + al,msi-base-spi = <160>; + al,msi-num-spis = <160>; + }; + + io-fabric { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xfc000000 0x2000000>; + + uart0: serial@1883000 { + compatible = "ns16550a"; + device_type = "serial"; + reg = <0x1883000 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <500000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@1884000 { + compatible = "ns16550a"; + device_type = "serial"; + reg = <0x1884000 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <500000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@1885000 { + compatible = "ns16550a"; + device_type = "serial"; + reg = <0x1885000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <500000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@1886000 { + compatible = "ns16550a"; + device_type = "serial"; + reg = <0x1886000 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <500000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + timer0: timer@1890000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x1890000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sbclk>; + }; + + timer1: timer@1891000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x1891000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sbclk>; + status = "disabled"; + }; + + timer2: timer@1892000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x1892000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sbclk>; + status = "disabled"; + }; + + timer3: timer@1893000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x1893000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sbclk>; + status = "disabled"; + }; + }; + }; +}; |