diff options
Diffstat (limited to 'arch/arm64/crypto/sha512-armv8.pl')
| -rw-r--r-- | arch/arm64/crypto/sha512-armv8.pl | 786 |
1 files changed, 786 insertions, 0 deletions
diff --git a/arch/arm64/crypto/sha512-armv8.pl b/arch/arm64/crypto/sha512-armv8.pl new file mode 100644 index 000000000..2d8655d5b --- /dev/null +++ b/arch/arm64/crypto/sha512-armv8.pl @@ -0,0 +1,786 @@ +#! /usr/bin/env perl +# SPDX-License-Identifier: GPL-2.0 + +# This code is taken from the OpenSSL project but the author (Andy Polyakov) +# has relicensed it under the GPLv2. Therefore this program is free software; +# you can redistribute it and/or modify it under the terms of the GNU General +# Public License version 2 as published by the Free Software Foundation. +# +# The original headers, including the original license headers, are +# included below for completeness. + +# Copyright 2014-2016 The OpenSSL Project Authors. All Rights Reserved. +# +# Licensed under the OpenSSL license (the "License"). You may not use +# this file except in compliance with the License. You can obtain a copy +# in the file LICENSE in the source distribution or at +# https://www.openssl.org/source/license.html + +# ==================================================================== +# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== +# +# SHA256/512 for ARMv8. +# +# Performance in cycles per processed byte and improvement coefficient +# over code generated with "default" compiler: +# +# SHA256-hw SHA256(*) SHA512 +# Apple A7 1.97 10.5 (+33%) 6.73 (-1%(**)) +# Cortex-A53 2.38 15.5 (+115%) 10.0 (+150%(***)) +# Cortex-A57 2.31 11.6 (+86%) 7.51 (+260%(***)) +# Denver 2.01 10.5 (+26%) 6.70 (+8%) +# X-Gene 20.0 (+100%) 12.8 (+300%(***)) +# Mongoose 2.36 13.0 (+50%) 8.36 (+33%) +# +# (*) Software SHA256 results are of lesser relevance, presented +# mostly for informational purposes. +# (**) The result is a trade-off: it's possible to improve it by +# 10% (or by 1 cycle per round), but at the cost of 20% loss +# on Cortex-A53 (or by 4 cycles per round). +# (***) Super-impressive coefficients over gcc-generated code are +# indication of some compiler "pathology", most notably code +# generated with -mgeneral-regs-only is significanty faster +# and the gap is only 40-90%. +# +# October 2016. +# +# Originally it was reckoned that it makes no sense to implement NEON +# version of SHA256 for 64-bit processors. This is because performance +# improvement on most wide-spread Cortex-A5x processors was observed +# to be marginal, same on Cortex-A53 and ~10% on A57. But then it was +# observed that 32-bit NEON SHA256 performs significantly better than +# 64-bit scalar version on *some* of the more recent processors. As +# result 64-bit NEON version of SHA256 was added to provide best +# all-round performance. For example it executes ~30% faster on X-Gene +# and Mongoose. [For reference, NEON version of SHA512 is bound to +# deliver much less improvement, likely *negative* on Cortex-A5x. +# Which is why NEON support is limited to SHA256.] + +$output=pop; +$flavour=pop; + +if ($flavour && $flavour ne "void") { + $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; + ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or + ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or + die "can't locate arm-xlate.pl"; + + open OUT,"| \"$^X\" $xlate $flavour $output"; + *STDOUT=*OUT; +} else { + open STDOUT,">$output"; +} + +if ($output =~ /512/) { + $BITS=512; + $SZ=8; + @Sigma0=(28,34,39); + @Sigma1=(14,18,41); + @sigma0=(1, 8, 7); + @sigma1=(19,61, 6); + $rounds=80; + $reg_t="x"; +} else { + $BITS=256; + $SZ=4; + @Sigma0=( 2,13,22); + @Sigma1=( 6,11,25); + @sigma0=( 7,18, 3); + @sigma1=(17,19,10); + $rounds=64; + $reg_t="w"; +} + +$func="sha${BITS}_block_data_order"; + +($ctx,$inp,$num,$Ktbl)=map("x$_",(0..2,30)); + +@X=map("$reg_t$_",(3..15,0..2)); +@V=($A,$B,$C,$D,$E,$F,$G,$H)=map("$reg_t$_",(20..27)); +($t0,$t1,$t2,$t3)=map("$reg_t$_",(16,17,19,28)); + +sub BODY_00_xx { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_; +my $j=($i+1)&15; +my ($T0,$T1,$T2)=(@X[($i-8)&15],@X[($i-9)&15],@X[($i-10)&15]); + $T0=@X[$i+3] if ($i<11); + +$code.=<<___ if ($i<16); +#ifndef __AARCH64EB__ + rev @X[$i],@X[$i] // $i +#endif +___ +$code.=<<___ if ($i<13 && ($i&1)); + ldp @X[$i+1],@X[$i+2],[$inp],#2*$SZ +___ +$code.=<<___ if ($i==13); + ldp @X[14],@X[15],[$inp] +___ +$code.=<<___ if ($i>=14); + ldr @X[($i-11)&15],[sp,#`$SZ*(($i-11)%4)`] +___ +$code.=<<___ if ($i>0 && $i<16); + add $a,$a,$t1 // h+=Sigma0(a) +___ +$code.=<<___ if ($i>=11); + str @X[($i-8)&15],[sp,#`$SZ*(($i-8)%4)`] +___ +# While ARMv8 specifies merged rotate-n-logical operation such as +# 'eor x,y,z,ror#n', it was found to negatively affect performance +# on Apple A7. The reason seems to be that it requires even 'y' to +# be available earlier. This means that such merged instruction is +# not necessarily best choice on critical path... On the other hand +# Cortex-A5x handles merged instructions much better than disjoint +# rotate and logical... See (**) footnote above. +$code.=<<___ if ($i<15); + ror $t0,$e,#$Sigma1[0] + add $h,$h,$t2 // h+=K[i] + eor $T0,$e,$e,ror#`$Sigma1[2]-$Sigma1[1]` + and $t1,$f,$e + bic $t2,$g,$e + add $h,$h,@X[$i&15] // h+=X[i] + orr $t1,$t1,$t2 // Ch(e,f,g) + eor $t2,$a,$b // a^b, b^c in next round + eor $t0,$t0,$T0,ror#$Sigma1[1] // Sigma1(e) + ror $T0,$a,#$Sigma0[0] + add $h,$h,$t1 // h+=Ch(e,f,g) + eor $t1,$a,$a,ror#`$Sigma0[2]-$Sigma0[1]` + add $h,$h,$t0 // h+=Sigma1(e) + and $t3,$t3,$t2 // (b^c)&=(a^b) + add $d,$d,$h // d+=h + eor $t3,$t3,$b // Maj(a,b,c) + eor $t1,$T0,$t1,ror#$Sigma0[1] // Sigma0(a) + add $h,$h,$t3 // h+=Maj(a,b,c) + ldr $t3,[$Ktbl],#$SZ // *K++, $t2 in next round + //add $h,$h,$t1 // h+=Sigma0(a) +___ +$code.=<<___ if ($i>=15); + ror $t0,$e,#$Sigma1[0] + add $h,$h,$t2 // h+=K[i] + ror $T1,@X[($j+1)&15],#$sigma0[0] + and $t1,$f,$e + ror $T2,@X[($j+14)&15],#$sigma1[0] + bic $t2,$g,$e + ror $T0,$a,#$Sigma0[0] + add $h,$h,@X[$i&15] // h+=X[i] + eor $t0,$t0,$e,ror#$Sigma1[1] + eor $T1,$T1,@X[($j+1)&15],ror#$sigma0[1] + orr $t1,$t1,$t2 // Ch(e,f,g) + eor $t2,$a,$b // a^b, b^c in next round + eor $t0,$t0,$e,ror#$Sigma1[2] // Sigma1(e) + eor $T0,$T0,$a,ror#$Sigma0[1] + add $h,$h,$t1 // h+=Ch(e,f,g) + and $t3,$t3,$t2 // (b^c)&=(a^b) + eor $T2,$T2,@X[($j+14)&15],ror#$sigma1[1] + eor $T1,$T1,@X[($j+1)&15],lsr#$sigma0[2] // sigma0(X[i+1]) + add $h,$h,$t0 // h+=Sigma1(e) + eor $t3,$t3,$b // Maj(a,b,c) + eor $t1,$T0,$a,ror#$Sigma0[2] // Sigma0(a) + eor $T2,$T2,@X[($j+14)&15],lsr#$sigma1[2] // sigma1(X[i+14]) + add @X[$j],@X[$j],@X[($j+9)&15] + add $d,$d,$h // d+=h + add $h,$h,$t3 // h+=Maj(a,b,c) + ldr $t3,[$Ktbl],#$SZ // *K++, $t2 in next round + add @X[$j],@X[$j],$T1 + add $h,$h,$t1 // h+=Sigma0(a) + add @X[$j],@X[$j],$T2 +___ + ($t2,$t3)=($t3,$t2); +} + +$code.=<<___; +#ifndef __KERNEL__ +# include "arm_arch.h" +#endif + +.text + +.extern OPENSSL_armcap_P +.globl $func +.type $func,%function +.align 6 +$func: +___ +$code.=<<___ if ($SZ==4); +#ifndef __KERNEL__ +# ifdef __ILP32__ + ldrsw x16,.LOPENSSL_armcap_P +# else + ldr x16,.LOPENSSL_armcap_P +# endif + adr x17,.LOPENSSL_armcap_P + add x16,x16,x17 + ldr w16,[x16] + tst w16,#ARMV8_SHA256 + b.ne .Lv8_entry + tst w16,#ARMV7_NEON + b.ne .Lneon_entry +#endif +___ +$code.=<<___; + stp x29,x30,[sp,#-128]! + add x29,sp,#0 + + stp x19,x20,[sp,#16] + stp x21,x22,[sp,#32] + stp x23,x24,[sp,#48] + stp x25,x26,[sp,#64] + stp x27,x28,[sp,#80] + sub sp,sp,#4*$SZ + + ldp $A,$B,[$ctx] // load context + ldp $C,$D,[$ctx,#2*$SZ] + ldp $E,$F,[$ctx,#4*$SZ] + add $num,$inp,$num,lsl#`log(16*$SZ)/log(2)` // end of input + ldp $G,$H,[$ctx,#6*$SZ] + adr $Ktbl,.LK$BITS + stp $ctx,$num,[x29,#96] + +.Loop: + ldp @X[0],@X[1],[$inp],#2*$SZ + ldr $t2,[$Ktbl],#$SZ // *K++ + eor $t3,$B,$C // magic seed + str $inp,[x29,#112] +___ +for ($i=0;$i<16;$i++) { &BODY_00_xx($i,@V); unshift(@V,pop(@V)); } +$code.=".Loop_16_xx:\n"; +for (;$i<32;$i++) { &BODY_00_xx($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + cbnz $t2,.Loop_16_xx + + ldp $ctx,$num,[x29,#96] + ldr $inp,[x29,#112] + sub $Ktbl,$Ktbl,#`$SZ*($rounds+1)` // rewind + + ldp @X[0],@X[1],[$ctx] + ldp @X[2],@X[3],[$ctx,#2*$SZ] + add $inp,$inp,#14*$SZ // advance input pointer + ldp @X[4],@X[5],[$ctx,#4*$SZ] + add $A,$A,@X[0] + ldp @X[6],@X[7],[$ctx,#6*$SZ] + add $B,$B,@X[1] + add $C,$C,@X[2] + add $D,$D,@X[3] + stp $A,$B,[$ctx] + add $E,$E,@X[4] + add $F,$F,@X[5] + stp $C,$D,[$ctx,#2*$SZ] + add $G,$G,@X[6] + add $H,$H,@X[7] + cmp $inp,$num + stp $E,$F,[$ctx,#4*$SZ] + stp $G,$H,[$ctx,#6*$SZ] + b.ne .Loop + + ldp x19,x20,[x29,#16] + add sp,sp,#4*$SZ + ldp x21,x22,[x29,#32] + ldp x23,x24,[x29,#48] + ldp x25,x26,[x29,#64] + ldp x27,x28,[x29,#80] + ldp x29,x30,[sp],#128 + ret +.size $func,.-$func + +.align 6 +.type .LK$BITS,%object +.LK$BITS: +___ +$code.=<<___ if ($SZ==8); + .quad 0x428a2f98d728ae22,0x7137449123ef65cd + .quad 0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc + .quad 0x3956c25bf348b538,0x59f111f1b605d019 + .quad 0x923f82a4af194f9b,0xab1c5ed5da6d8118 + .quad 0xd807aa98a3030242,0x12835b0145706fbe + .quad 0x243185be4ee4b28c,0x550c7dc3d5ffb4e2 + .quad 0x72be5d74f27b896f,0x80deb1fe3b1696b1 + .quad 0x9bdc06a725c71235,0xc19bf174cf692694 + .quad 0xe49b69c19ef14ad2,0xefbe4786384f25e3 + .quad 0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65 + .quad 0x2de92c6f592b0275,0x4a7484aa6ea6e483 + .quad 0x5cb0a9dcbd41fbd4,0x76f988da831153b5 + .quad 0x983e5152ee66dfab,0xa831c66d2db43210 + .quad 0xb00327c898fb213f,0xbf597fc7beef0ee4 + .quad 0xc6e00bf33da88fc2,0xd5a79147930aa725 + .quad 0x06ca6351e003826f,0x142929670a0e6e70 + .quad 0x27b70a8546d22ffc,0x2e1b21385c26c926 + .quad 0x4d2c6dfc5ac42aed,0x53380d139d95b3df + .quad 0x650a73548baf63de,0x766a0abb3c77b2a8 + .quad 0x81c2c92e47edaee6,0x92722c851482353b + .quad 0xa2bfe8a14cf10364,0xa81a664bbc423001 + .quad 0xc24b8b70d0f89791,0xc76c51a30654be30 + .quad 0xd192e819d6ef5218,0xd69906245565a910 + .quad 0xf40e35855771202a,0x106aa07032bbd1b8 + .quad 0x19a4c116b8d2d0c8,0x1e376c085141ab53 + .quad 0x2748774cdf8eeb99,0x34b0bcb5e19b48a8 + .quad 0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb + .quad 0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3 + .quad 0x748f82ee5defb2fc,0x78a5636f43172f60 + .quad 0x84c87814a1f0ab72,0x8cc702081a6439ec + .quad 0x90befffa23631e28,0xa4506cebde82bde9 + .quad 0xbef9a3f7b2c67915,0xc67178f2e372532b + .quad 0xca273eceea26619c,0xd186b8c721c0c207 + .quad 0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178 + .quad 0x06f067aa72176fba,0x0a637dc5a2c898a6 + .quad 0x113f9804bef90dae,0x1b710b35131c471b + .quad 0x28db77f523047d84,0x32caab7b40c72493 + .quad 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c + .quad 0x4cc5d4becb3e42b6,0x597f299cfc657e2a + .quad 0x5fcb6fab3ad6faec,0x6c44198c4a475817 + .quad 0 // terminator +___ +$code.=<<___ if ($SZ==4); + .long 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 + .long 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 + .long 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 + .long 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 + .long 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc + .long 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da + .long 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 + .long 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 + .long 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 + .long 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 + .long 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 + .long 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 + .long 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 + .long 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 + .long 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 + .long 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 + .long 0 //terminator +___ +$code.=<<___; +.size .LK$BITS,.-.LK$BITS +#ifndef __KERNEL__ +.align 3 +.LOPENSSL_armcap_P: +# ifdef __ILP32__ + .long OPENSSL_armcap_P-. +# else + .quad OPENSSL_armcap_P-. +# endif +#endif +.asciz "SHA$BITS block transform for ARMv8, CRYPTOGAMS by <appro\@openssl.org>" +.align 2 +___ + +if ($SZ==4) { +my $Ktbl="x3"; + +my ($ABCD,$EFGH,$abcd)=map("v$_.16b",(0..2)); +my @MSG=map("v$_.16b",(4..7)); +my ($W0,$W1)=("v16.4s","v17.4s"); +my ($ABCD_SAVE,$EFGH_SAVE)=("v18.16b","v19.16b"); + +$code.=<<___; +#ifndef __KERNEL__ +.type sha256_block_armv8,%function +.align 6 +sha256_block_armv8: +.Lv8_entry: + stp x29,x30,[sp,#-16]! + add x29,sp,#0 + + ld1.32 {$ABCD,$EFGH},[$ctx] + adr $Ktbl,.LK256 + +.Loop_hw: + ld1 {@MSG[0]-@MSG[3]},[$inp],#64 + sub $num,$num,#1 + ld1.32 {$W0},[$Ktbl],#16 + rev32 @MSG[0],@MSG[0] + rev32 @MSG[1],@MSG[1] + rev32 @MSG[2],@MSG[2] + rev32 @MSG[3],@MSG[3] + orr $ABCD_SAVE,$ABCD,$ABCD // offload + orr $EFGH_SAVE,$EFGH,$EFGH +___ +for($i=0;$i<12;$i++) { +$code.=<<___; + ld1.32 {$W1},[$Ktbl],#16 + add.i32 $W0,$W0,@MSG[0] + sha256su0 @MSG[0],@MSG[1] + orr $abcd,$ABCD,$ABCD + sha256h $ABCD,$EFGH,$W0 + sha256h2 $EFGH,$abcd,$W0 + sha256su1 @MSG[0],@MSG[2],@MSG[3] +___ + ($W0,$W1)=($W1,$W0); push(@MSG,shift(@MSG)); +} +$code.=<<___; + ld1.32 {$W1},[$Ktbl],#16 + add.i32 $W0,$W0,@MSG[0] + orr $abcd,$ABCD,$ABCD + sha256h $ABCD,$EFGH,$W0 + sha256h2 $EFGH,$abcd,$W0 + + ld1.32 {$W0},[$Ktbl],#16 + add.i32 $W1,$W1,@MSG[1] + orr $abcd,$ABCD,$ABCD + sha256h $ABCD,$EFGH,$W1 + sha256h2 $EFGH,$abcd,$W1 + + ld1.32 {$W1},[$Ktbl] + add.i32 $W0,$W0,@MSG[2] + sub $Ktbl,$Ktbl,#$rounds*$SZ-16 // rewind + orr $abcd,$ABCD,$ABCD + sha256h $ABCD,$EFGH,$W0 + sha256h2 $EFGH,$abcd,$W0 + + add.i32 $W1,$W1,@MSG[3] + orr $abcd,$ABCD,$ABCD + sha256h $ABCD,$EFGH,$W1 + sha256h2 $EFGH,$abcd,$W1 + + add.i32 $ABCD,$ABCD,$ABCD_SAVE + add.i32 $EFGH,$EFGH,$EFGH_SAVE + + cbnz $num,.Loop_hw + + st1.32 {$ABCD,$EFGH},[$ctx] + + ldr x29,[sp],#16 + ret +.size sha256_block_armv8,.-sha256_block_armv8 +#endif +___ +} + +if ($SZ==4) { ######################################### NEON stuff # +# You'll surely note a lot of similarities with sha256-armv4 module, +# and of course it's not a coincidence. sha256-armv4 was used as +# initial template, but was adapted for ARMv8 instruction set and +# extensively re-tuned for all-round performance. + +my @V = ($A,$B,$C,$D,$E,$F,$G,$H) = map("w$_",(3..10)); +my ($t0,$t1,$t2,$t3,$t4) = map("w$_",(11..15)); +my $Ktbl="x16"; +my $Xfer="x17"; +my @X = map("q$_",(0..3)); +my ($T0,$T1,$T2,$T3,$T4,$T5,$T6,$T7) = map("q$_",(4..7,16..19)); +my $j=0; + +sub AUTOLOAD() # thunk [simplified] x86-style perlasm +{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./; + my $arg = pop; + $arg = "#$arg" if ($arg*1 eq $arg); + $code .= "\t$opcode\t".join(',',@_,$arg)."\n"; +} + +sub Dscalar { shift =~ m|[qv]([0-9]+)|?"d$1":""; } +sub Dlo { shift =~ m|[qv]([0-9]+)|?"v$1.d[0]":""; } +sub Dhi { shift =~ m|[qv]([0-9]+)|?"v$1.d[1]":""; } + +sub Xupdate() +{ use integer; + my $body = shift; + my @insns = (&$body,&$body,&$body,&$body); + my ($a,$b,$c,$d,$e,$f,$g,$h); + + &ext_8 ($T0,@X[0],@X[1],4); # X[1..4] + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &ext_8 ($T3,@X[2],@X[3],4); # X[9..12] + eval(shift(@insns)); + eval(shift(@insns)); + &mov (&Dscalar($T7),&Dhi(@X[3])); # X[14..15] + eval(shift(@insns)); + eval(shift(@insns)); + &ushr_32 ($T2,$T0,$sigma0[0]); + eval(shift(@insns)); + &ushr_32 ($T1,$T0,$sigma0[2]); + eval(shift(@insns)); + &add_32 (@X[0],@X[0],$T3); # X[0..3] += X[9..12] + eval(shift(@insns)); + &sli_32 ($T2,$T0,32-$sigma0[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &ushr_32 ($T3,$T0,$sigma0[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &eor_8 ($T1,$T1,$T2); + eval(shift(@insns)); + eval(shift(@insns)); + &sli_32 ($T3,$T0,32-$sigma0[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &ushr_32 ($T4,$T7,$sigma1[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &eor_8 ($T1,$T1,$T3); # sigma0(X[1..4]) + eval(shift(@insns)); + eval(shift(@insns)); + &sli_32 ($T4,$T7,32-$sigma1[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &ushr_32 ($T5,$T7,$sigma1[2]); + eval(shift(@insns)); + eval(shift(@insns)); + &ushr_32 ($T3,$T7,$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &add_32 (@X[0],@X[0],$T1); # X[0..3] += sigma0(X[1..4]) + eval(shift(@insns)); + eval(shift(@insns)); + &sli_u32 ($T3,$T7,32-$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &eor_8 ($T5,$T5,$T4); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &eor_8 ($T5,$T5,$T3); # sigma1(X[14..15]) + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &add_32 (@X[0],@X[0],$T5); # X[0..1] += sigma1(X[14..15]) + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &ushr_32 ($T6,@X[0],$sigma1[0]); + eval(shift(@insns)); + &ushr_32 ($T7,@X[0],$sigma1[2]); + eval(shift(@insns)); + eval(shift(@insns)); + &sli_32 ($T6,@X[0],32-$sigma1[0]); + eval(shift(@insns)); + &ushr_32 ($T5,@X[0],$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &eor_8 ($T7,$T7,$T6); + eval(shift(@insns)); + eval(shift(@insns)); + &sli_32 ($T5,@X[0],32-$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &ld1_32 ("{$T0}","[$Ktbl], #16"); + eval(shift(@insns)); + &eor_8 ($T7,$T7,$T5); # sigma1(X[16..17]) + eval(shift(@insns)); + eval(shift(@insns)); + &eor_8 ($T5,$T5,$T5); + eval(shift(@insns)); + eval(shift(@insns)); + &mov (&Dhi($T5), &Dlo($T7)); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &add_32 (@X[0],@X[0],$T5); # X[2..3] += sigma1(X[16..17]) + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &add_32 ($T0,$T0,@X[0]); + while($#insns>=1) { eval(shift(@insns)); } + &st1_32 ("{$T0}","[$Xfer], #16"); + eval(shift(@insns)); + + push(@X,shift(@X)); # "rotate" X[] +} + +sub Xpreload() +{ use integer; + my $body = shift; + my @insns = (&$body,&$body,&$body,&$body); + my ($a,$b,$c,$d,$e,$f,$g,$h); + + eval(shift(@insns)); + eval(shift(@insns)); + &ld1_8 ("{@X[0]}","[$inp],#16"); + eval(shift(@insns)); + eval(shift(@insns)); + &ld1_32 ("{$T0}","[$Ktbl],#16"); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &rev32 (@X[0],@X[0]); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &add_32 ($T0,$T0,@X[0]); + foreach (@insns) { eval; } # remaining instructions + &st1_32 ("{$T0}","[$Xfer], #16"); + + push(@X,shift(@X)); # "rotate" X[] +} + +sub body_00_15 () { + ( + '($a,$b,$c,$d,$e,$f,$g,$h)=@V;'. + '&add ($h,$h,$t1)', # h+=X[i]+K[i] + '&add ($a,$a,$t4);'. # h+=Sigma0(a) from the past + '&and ($t1,$f,$e)', + '&bic ($t4,$g,$e)', + '&eor ($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))', + '&add ($a,$a,$t2)', # h+=Maj(a,b,c) from the past + '&orr ($t1,$t1,$t4)', # Ch(e,f,g) + '&eor ($t0,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))', # Sigma1(e) + '&eor ($t4,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))', + '&add ($h,$h,$t1)', # h+=Ch(e,f,g) + '&ror ($t0,$t0,"#$Sigma1[0]")', + '&eor ($t2,$a,$b)', # a^b, b^c in next round + '&eor ($t4,$t4,$a,"ror#".($Sigma0[2]-$Sigma0[0]))', # Sigma0(a) + '&add ($h,$h,$t0)', # h+=Sigma1(e) + '&ldr ($t1,sprintf "[sp,#%d]",4*(($j+1)&15)) if (($j&15)!=15);'. + '&ldr ($t1,"[$Ktbl]") if ($j==15);'. + '&and ($t3,$t3,$t2)', # (b^c)&=(a^b) + '&ror ($t4,$t4,"#$Sigma0[0]")', + '&add ($d,$d,$h)', # d+=h + '&eor ($t3,$t3,$b)', # Maj(a,b,c) + '$j++; unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);' + ) +} + +$code.=<<___; +#ifdef __KERNEL__ +.globl sha256_block_neon +#endif +.type sha256_block_neon,%function +.align 4 +sha256_block_neon: +.Lneon_entry: + stp x29, x30, [sp, #-16]! + mov x29, sp + sub sp,sp,#16*4 + + adr $Ktbl,.LK256 + add $num,$inp,$num,lsl#6 // len to point at the end of inp + + ld1.8 {@X[0]},[$inp], #16 + ld1.8 {@X[1]},[$inp], #16 + ld1.8 {@X[2]},[$inp], #16 + ld1.8 {@X[3]},[$inp], #16 + ld1.32 {$T0},[$Ktbl], #16 + ld1.32 {$T1},[$Ktbl], #16 + ld1.32 {$T2},[$Ktbl], #16 + ld1.32 {$T3},[$Ktbl], #16 + rev32 @X[0],@X[0] // yes, even on + rev32 @X[1],@X[1] // big-endian + rev32 @X[2],@X[2] + rev32 @X[3],@X[3] + mov $Xfer,sp + add.32 $T0,$T0,@X[0] + add.32 $T1,$T1,@X[1] + add.32 $T2,$T2,@X[2] + st1.32 {$T0-$T1},[$Xfer], #32 + add.32 $T3,$T3,@X[3] + st1.32 {$T2-$T3},[$Xfer] + sub $Xfer,$Xfer,#32 + + ldp $A,$B,[$ctx] + ldp $C,$D,[$ctx,#8] + ldp $E,$F,[$ctx,#16] + ldp $G,$H,[$ctx,#24] + ldr $t1,[sp,#0] + mov $t2,wzr + eor $t3,$B,$C + mov $t4,wzr + b .L_00_48 + +.align 4 +.L_00_48: +___ + &Xupdate(\&body_00_15); + &Xupdate(\&body_00_15); + &Xupdate(\&body_00_15); + &Xupdate(\&body_00_15); +$code.=<<___; + cmp $t1,#0 // check for K256 terminator + ldr $t1,[sp,#0] + sub $Xfer,$Xfer,#64 + bne .L_00_48 + + sub $Ktbl,$Ktbl,#256 // rewind $Ktbl + cmp $inp,$num + mov $Xfer, #64 + csel $Xfer, $Xfer, xzr, eq + sub $inp,$inp,$Xfer // avoid SEGV + mov $Xfer,sp +___ + &Xpreload(\&body_00_15); + &Xpreload(\&body_00_15); + &Xpreload(\&body_00_15); + &Xpreload(\&body_00_15); +$code.=<<___; + add $A,$A,$t4 // h+=Sigma0(a) from the past + ldp $t0,$t1,[$ctx,#0] + add $A,$A,$t2 // h+=Maj(a,b,c) from the past + ldp $t2,$t3,[$ctx,#8] + add $A,$A,$t0 // accumulate + add $B,$B,$t1 + ldp $t0,$t1,[$ctx,#16] + add $C,$C,$t2 + add $D,$D,$t3 + ldp $t2,$t3,[$ctx,#24] + add $E,$E,$t0 + add $F,$F,$t1 + ldr $t1,[sp,#0] + stp $A,$B,[$ctx,#0] + add $G,$G,$t2 + mov $t2,wzr + stp $C,$D,[$ctx,#8] + add $H,$H,$t3 + stp $E,$F,[$ctx,#16] + eor $t3,$B,$C + stp $G,$H,[$ctx,#24] + mov $t4,wzr + mov $Xfer,sp + b.ne .L_00_48 + + ldr x29,[x29] + add sp,sp,#16*4+16 + ret +.size sha256_block_neon,.-sha256_block_neon +___ +} + +$code.=<<___; +#ifndef __KERNEL__ +.comm OPENSSL_armcap_P,4,4 +#endif +___ + +{ my %opcode = ( + "sha256h" => 0x5e004000, "sha256h2" => 0x5e005000, + "sha256su0" => 0x5e282800, "sha256su1" => 0x5e006000 ); + + sub unsha256 { + my ($mnemonic,$arg)=@_; + + $arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)[^,]*(?:,\s*[qv]([0-9]+))?/o + && + sprintf ".inst\t0x%08x\t//%s %s", + $opcode{$mnemonic}|$1|($2<<5)|($3<<16), + $mnemonic,$arg; + } +} + +open SELF,$0; +while(<SELF>) { + next if (/^#!/); + last if (!s/^#/\/\// and !/^$/); + print; +} +close SELF; + +foreach(split("\n",$code)) { + + s/\`([^\`]*)\`/eval($1)/ge; + + s/\b(sha256\w+)\s+([qv].*)/unsha256($1,$2)/ge; + + s/\bq([0-9]+)\b/v$1.16b/g; # old->new registers + + s/\.[ui]?8(\s)/$1/; + s/\.\w?32\b// and s/\.16b/\.4s/g; + m/(ld|st)1[^\[]+\[0\]/ and s/\.4s/\.s/g; + + print $_,"\n"; +} + +close STDOUT; |