diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/m68k/Kconfig.machine | 459 |
1 files changed, 459 insertions, 0 deletions
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine new file mode 100644 index 000000000..d07f3009a --- /dev/null +++ b/arch/m68k/Kconfig.machine @@ -0,0 +1,459 @@ +# SPDX-License-Identifier: GPL-2.0 +comment "Machine Types" + +if M68KCLASSIC + +config AMIGA + bool "Amiga support" + depends on MMU + select MMU_MOTOROLA if MMU + help + This option enables support for the Amiga series of computers. If + you plan to use this kernel on an Amiga, say Y here and browse the + material available in <file:Documentation/m68k>; otherwise say N. + +config ATARI + bool "Atari support" + depends on MMU + select MMU_MOTOROLA if MMU + help + This option enables support for the 68000-based Atari series of + computers (including the TT, Falcon and Medusa). If you plan to use + this kernel on an Atari, say Y here and browse the material + available in <file:Documentation/m68k>; otherwise say N. + +config MAC + bool "Macintosh support" + depends on MMU + select MMU_MOTOROLA if MMU + help + This option enables support for the Apple Macintosh series of + computers (yes, there is experimental support now, at least for part + of the series). + + Say N unless you're willing to code the remaining necessary support. + ;) + +config APOLLO + bool "Apollo support" + depends on MMU + select MMU_MOTOROLA if MMU + help + Say Y here if you want to run Linux on an MC680x0-based Apollo + Domain workstation such as the DN3500. + +config VME + bool "VME (Motorola and BVM) support" + depends on MMU + select MMU_MOTOROLA if MMU + help + Say Y here if you want to build a kernel for a 680x0 based VME + board. Boards currently supported include Motorola boards MVME147, + MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and + BVME6000 boards from BVM Ltd are also supported. + +config MVME147 + bool "MVME147 support" + depends on MMU + depends on VME + help + Say Y to include support for early Motorola VME boards. This will + build a kernel which can run on MVME147 single-board computers. If + you select this option you will have to select the appropriate + drivers for SCSI, Ethernet and serial ports later on. + +config MVME16x + bool "MVME162, 166 and 167 support" + depends on MMU + depends on VME + help + Say Y to include support for Motorola VME boards. This will build a + kernel which can run on MVME162, MVME166, MVME167, MVME172, and + MVME177 boards. If you select this option you will have to select + the appropriate drivers for SCSI, Ethernet and serial ports later + on. + +config BVME6000 + bool "BVME4000 and BVME6000 support" + depends on MMU + depends on VME + help + Say Y to include support for VME boards from BVM Ltd. This will + build a kernel which can run on BVME4000 and BVME6000 boards. If + you select this option you will have to select the appropriate + drivers for SCSI, Ethernet and serial ports later on. + +config HP300 + bool "HP9000/300 and HP9000/400 support" + depends on MMU + select MMU_MOTOROLA if MMU + help + This option enables support for the HP9000/300 and HP9000/400 series + of workstations. Support for these machines is still somewhat + experimental. If you plan to try to use the kernel on such a machine + say Y here. + Everybody else says N. + +config SUN3X + bool "Sun3x support" + depends on MMU + select MMU_MOTOROLA if MMU + select M68030 + help + This option enables support for the Sun 3x series of workstations. + Be warned that this support is very experimental. + Note that Sun 3x kernels are not compatible with Sun 3 hardware. + General Linux information on the Sun 3x series (now discontinued) + is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. + + If you don't want to compile a kernel for a Sun 3x, say N. + +config Q40 + bool "Q40/Q60 support" + depends on MMU + select MMU_MOTOROLA if MMU + help + The Q40 is a Motorola 68040-based successor to the Sinclair QL + manufactured in Germany. There is an official Q40 home page at + <http://www.q40.de/>. This option enables support for the Q40 and + Q60. Select your CPU below. For 68LC060 don't forget to enable FPU + emulation. + +config SUN3 + bool "Sun3 support" + depends on MMU + depends on !MMU_MOTOROLA + select MMU_SUN3 if MMU + select M68020 + help + This option enables support for the Sun 3 series of workstations + (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires + that all other hardware types must be disabled, as Sun 3 kernels + are incompatible with all other m68k targets (including Sun 3x!). + + If you don't want to compile a kernel exclusively for a Sun 3, say N. + +endif # M68KCLASSIC + +config PILOT + bool + +config PILOT3 + bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support" + depends on M68328 + select PILOT + help + Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII. + +config XCOPILOT_BUGS + bool "(X)Copilot support" + depends on PILOT3 + help + Support the bugs of Xcopilot. + +config UCSIMM + bool "uCsimm module support" + depends on M68EZ328 + help + Support for the Arcturus Networks uCsimm module. + +config UCDIMM + bool "uDsimm module support" + depends on M68VZ328 + help + Support for the Arcturus Networks uDsimm module. + +config DRAGEN2 + bool "DragenEngine II board support" + depends on M68VZ328 + help + Support for the DragenEngine II board. + +config DIRECT_IO_ACCESS + bool "Allow user to access IO directly" + depends on (UCSIMM || UCDIMM || DRAGEN2) + help + Disable the CPU internal registers protection in user mode, + to allow a user application to read/write them. + +config INIT_LCD + bool "Initialize LCD" + depends on (UCSIMM || UCDIMM || DRAGEN2) + help + Initialize the LCD controller of the 68x328 processor. + +config MEMORY_RESERVE + int "Memory reservation (MiB)" + depends on (UCSIMM || UCDIMM) + default 0 + help + Reserve certain memory regions on 68x328 based boards. + +config ARN5206 + bool "Arnewsh 5206 board support" + depends on M5206 + help + Support for the Arnewsh 5206 board. + +config M5206eC3 + bool "Motorola M5206eC3 board support" + depends on M5206e + help + Support for the Motorola M5206eC3 board. + +config ELITE + bool "Motorola M5206eLITE board support" + depends on M5206e + help + Support for the Motorola M5206eLITE board. + +config M5235EVB + bool "Freescale M5235EVB support" + depends on M523x + help + Support for the Freescale M5235EVB board. + +config M5249C3 + bool "Motorola M5249C3 board support" + depends on M5249 + help + Support for the Motorola M5249C3 board. + +config M5272C3 + bool "Motorola M5272C3 board support" + depends on M5272 + help + Support for the Motorola M5272C3 board. + +config WILDFIRE + bool "Intec Automation Inc. WildFire board support" + depends on M528x + help + Support for the Intec Automation Inc. WildFire. + +config WILDFIREMOD + bool "Intec Automation Inc. WildFire module support" + depends on M528x + help + Support for the Intec Automation Inc. WildFire module. + +config ARN5307 + bool "Arnewsh 5307 board support" + depends on M5307 + help + Support for the Arnewsh 5307 board. + +config M5307C3 + bool "Motorola M5307C3 board support" + depends on M5307 + help + Support for the Motorola M5307C3 board. + +config SECUREEDGEMP3 + bool "SnapGear SecureEdge/MP3 platform support" + depends on M5307 + help + Support for the SnapGear SecureEdge/MP3 platform. + +config M5407C3 + bool "Motorola M5407C3 board support" + depends on M5407 + help + Support for the Motorola M5407C3 board. + +config AMCORE + bool "Sysam AMCORE board support" + depends on M5307 + help + Support for the Sysam AMCORE open-hardware generic board. + +config STMARK2 + bool "Sysam stmark2 board support" + depends on M5441x + help + Support for the Sysam stmark2 open-hardware generic board. + +config FIREBEE + bool "FireBee board support" + depends on M547x + help + Support for the FireBee ColdFire 5475 based board. + +config CLEOPATRA + bool "Feith CLEOPATRA board support" + depends on (M5307 || M5407) + help + Support for the Feith Cleopatra boards. + +config CANCam + bool "Feith CANCam board support" + depends on M5272 + help + Support for the Feith CANCam board. + +config SCALES + bool "Feith SCALES board support" + depends on M5272 + help + Support for the Feith SCALES board. + +config NETtel + bool "SecureEdge/NETtel board support" + depends on (M5206e || M5272 || M5307) + help + Support for the SnapGear NETtel/SecureEdge/SnapGear boards. + +config MOD5272 + bool "Netburner MOD-5272 board support" + depends on M5272 + help + Support for the Netburner MOD-5272 board. + +if !MMU || COLDFIRE + +comment "Machine Options" + +config UBOOT + bool "Support for U-Boot command line parameters" + depends on COLDFIRE + help + If you say Y here kernel will try to collect command + line parameters from the initial u-boot stack. + default n + +config 4KSTACKS + bool "Use 4Kb for kernel stacks instead of 8Kb" + default y + help + If you say Y here the kernel will use a 4Kb stacksize for the + kernel stack attached to each process/thread. This facilitates + running more threads on a system and also reduces the pressure + on the VM subsystem for higher order allocations. + +comment "RAM configuration" + +config RAMBASE + hex "Address of the base of RAM" + default "0" + help + Define the address that RAM starts at. On many platforms this is + 0, the base of the address space. And this is the default. Some + platforms choose to setup their RAM at other addresses within the + processor address space. + +config RAMSIZE + hex "Size of RAM (in bytes), or 0 for automatic" + default "0x400000" + help + Define the size of the system RAM. If you select 0 then the + kernel will try to probe the RAM size at runtime. This is not + supported on all CPU types. + +config VECTORBASE + hex "Address of the base of system vectors" + default "0" + help + Define the address of the system vectors. Commonly this is + put at the start of RAM, but it doesn't have to be. On ColdFire + platforms this address is programmed into the VBR register, thus + actually setting the address to use. + +config MBAR + hex "Address of the MBAR (internal peripherals)" + default "0x10000000" + depends on HAVE_MBAR + help + Define the address of the internal system peripherals. This value + is set in the processors MBAR register. This is generally setup by + the boot loader, and will not be written by the kernel. By far most + ColdFire boards use the default 0x10000000 value, so if unsure then + use this. + +config IPSBAR + hex "Address of the IPSBAR (internal peripherals)" + default "0x40000000" + depends on HAVE_IPSBAR + help + Define the address of the internal system peripherals. This value + is set in the processors IPSBAR register. This is generally setup by + the boot loader, and will not be written by the kernel. By far most + ColdFire boards use the default 0x40000000 value, so if unsure then + use this. + +config KERNELBASE + hex "Address of the base of kernel code" + default "0x400" + help + Typically on m68k systems the kernel will not start at the base + of RAM, but usually some small offset from it. Define the start + address of the kernel here. The most common setup will have the + processor vectors at the base of RAM and then the start of the + kernel. On some platforms some RAM is reserved for boot loaders + and the kernel starts after that. The 0x400 default was based on + a system with the RAM based at address 0, and leaving enough room + for the theoretical maximum number of 256 vectors. + +comment "ROM configuration" + +config ROM + bool "Specify ROM linker regions" + default n + help + Define a ROM region for the linker script. This creates a kernel + that can be stored in flash, with possibly the text, and data + regions being copied out to RAM at startup. + +config ROMBASE + hex "Address of the base of ROM device" + default "0" + depends on ROM + help + Define the address that the ROM region starts at. Some platforms + use this to set their chip select region accordingly for the boot + device. + +config ROMVEC + hex "Address of the base of the ROM vectors" + default "0" + depends on ROM + help + This is almost always the same as the base of the ROM. Since on all + 68000 type variants the vectors are at the base of the boot device + on system startup. + +config ROMSTART + hex "Address of the base of system image in ROM" + default "0x400" + depends on ROM + help + Define the start address of the system image in ROM. Commonly this + is strait after the ROM vectors. + +config ROMSIZE + hex "Size of the ROM device" + default "0x100000" + depends on ROM + help + Size of the ROM device. On some platforms this is used to setup + the chip select that controls the boot ROM device. + +choice + prompt "Kernel executes from" + ---help--- + Choose the memory type that the kernel will be running in. + +config RAMKERNEL + bool "RAM" + help + The kernel will be resident in RAM when running. + +config ROMKERNEL + bool "ROM" + help + The kernel will be resident in FLASH/ROM when running. This is + often referred to as Execute-in-Place (XIP), since the kernel + code executes from the position it is stored in the FLASH/ROM. + +endchoice + +endif |