diff options
Diffstat (limited to '')
-rw-r--r-- | arch/mips/alchemy/common/dbdma.c | 27 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/db1000.c | 12 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/db1200.c | 25 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/db1300.c | 14 |
4 files changed, 30 insertions, 48 deletions
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index e9ee9ab90..4ca2c2887 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -30,7 +30,6 @@ * */ -#include <linux/dma-map-ops.h> /* for dma_default_coherent */ #include <linux/init.h> #include <linux/kernel.h> #include <linux/slab.h> @@ -624,18 +623,17 @@ u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) dp->dscr_cmd0 &= ~DSCR_CMD0_IE; /* - * There is an erratum on certain Au1200/Au1550 revisions that could - * result in "stale" data being DMA'ed. It has to do with the snoop - * logic on the cache eviction buffer. dma_default_coherent is set - * to false on these parts. + * There is an errata on the Au1200/Au1550 parts that could result + * in "stale" data being DMA'ed. It has to do with the snoop logic on + * the cache eviction buffer. DMA_NONCOHERENT is on by default for + * these parts. If it is fixed in the future, these dma_cache_inv will + * just be nothing more than empty macros. See io.h. */ - if (!dma_default_coherent) - dma_cache_wback_inv(KSEG0ADDR(buf), nbytes); + dma_cache_wback_inv((unsigned long)buf, nbytes); dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ wmb(); /* drain writebuffer */ dma_cache_wback_inv((unsigned long)dp, sizeof(*dp)); ctp->chan_ptr->ddma_dbell = 0; - wmb(); /* force doorbell write out to dma engine */ /* Get next descriptor pointer. */ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); @@ -687,18 +685,17 @@ u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1); #endif /* - * There is an erratum on certain Au1200/Au1550 revisions that could - * result in "stale" data being DMA'ed. It has to do with the snoop - * logic on the cache eviction buffer. dma_default_coherent is set - * to false on these parts. + * There is an errata on the Au1200/Au1550 parts that could result in + * "stale" data being DMA'ed. It has to do with the snoop logic on the + * cache eviction buffer. DMA_NONCOHERENT is on by default for these + * parts. If it is fixed in the future, these dma_cache_inv will just + * be nothing more than empty macros. See io.h. */ - if (!dma_default_coherent) - dma_cache_inv(KSEG0ADDR(buf), nbytes); + dma_cache_inv((unsigned long)buf, nbytes); dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ wmb(); /* drain writebuffer */ dma_cache_wback_inv((unsigned long)dp, sizeof(*dp)); ctp->chan_ptr->ddma_dbell = 0; - wmb(); /* force doorbell write out to dma engine */ /* Get next descriptor pointer. */ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c index 13e3c8485..548bd4db0 100644 --- a/arch/mips/alchemy/devboards/db1000.c +++ b/arch/mips/alchemy/devboards/db1000.c @@ -27,7 +27,6 @@ #include <linux/interrupt.h> #include <linux/leds.h> #include <linux/mmc/host.h> -#include <linux/module.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/spi/spi.h> @@ -174,14 +173,10 @@ static struct platform_device db1x00_audio_dev = { /******************************************************************************/ +#ifdef CONFIG_MMC_AU1X static irqreturn_t db1100_mmc_cd(int irq, void *ptr) { - void (*mmc_cd)(struct mmc_host *, unsigned long); - /* link against CONFIG_MMC=m */ - mmc_cd = symbol_get(mmc_detect_change); - mmc_cd(ptr, msecs_to_jiffies(500)); - symbol_put(mmc_detect_change); - + mmc_detect_change(ptr, msecs_to_jiffies(500)); return IRQ_HANDLED; } @@ -386,6 +381,7 @@ static struct platform_device db1100_mmc1_dev = { .num_resources = ARRAY_SIZE(au1100_mmc1_res), .resource = au1100_mmc1_res, }; +#endif /* CONFIG_MMC_AU1X */ /******************************************************************************/ @@ -503,9 +499,11 @@ static struct platform_device *db1000_devs[] = { static struct platform_device *db1100_devs[] = { &au1100_lcd_device, +#ifdef CONFIG_MMC_AU1X &db1100_mmc0_dev, &db1100_mmc1_dev, &db1000_irda_dev, +#endif }; int __init db1000_dev_setup(void) diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c index da7663770..48840e48e 100644 --- a/arch/mips/alchemy/devboards/db1200.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -23,7 +23,6 @@ #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/init.h> -#include <linux/module.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/leds.h> @@ -342,6 +341,7 @@ static struct platform_device db1200_ide_dev = { /**********************************************************************/ +#ifdef CONFIG_MMC_AU1X /* SD carddetects: they're supposed to be edge-triggered, but ack * doesn't seem to work (CPLD Rev 2). Instead, the screaming one * is disabled and its counterpart enabled. The 200ms timeout is @@ -355,14 +355,7 @@ static irqreturn_t db1200_mmc_cd(int irq, void *ptr) static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr) { - void (*mmc_cd)(struct mmc_host *, unsigned long); - - /* link against CONFIG_MMC=m */ - mmc_cd = symbol_get(mmc_detect_change); - if (mmc_cd) { - mmc_cd(ptr, msecs_to_jiffies(200)); - symbol_put(mmc_detect_change); - } + mmc_detect_change(ptr, msecs_to_jiffies(200)); msleep(100); /* debounce */ if (irq == DB1200_SD0_INSERT_INT) @@ -446,14 +439,7 @@ static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr) static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr) { - void (*mmc_cd)(struct mmc_host *, unsigned long); - - /* link against CONFIG_MMC=m */ - mmc_cd = symbol_get(mmc_detect_change); - if (mmc_cd) { - mmc_cd(ptr, msecs_to_jiffies(200)); - symbol_put(mmc_detect_change); - } + mmc_detect_change(ptr, msecs_to_jiffies(200)); msleep(100); /* debounce */ if (irq == PB1200_SD1_INSERT_INT) @@ -616,6 +602,7 @@ static struct platform_device pb1200_mmc1_dev = { .num_resources = ARRAY_SIZE(au1200_mmc1_res), .resource = au1200_mmc1_res, }; +#endif /* CONFIG_MMC_AU1X */ /**********************************************************************/ @@ -783,7 +770,9 @@ static struct platform_device db1200_audiodma_dev = { static struct platform_device *db1200_devs[] __initdata = { NULL, /* PSC0, selected by S6.8 */ &db1200_ide_dev, +#ifdef CONFIG_MMC_AU1X &db1200_mmc0_dev, +#endif &au1200_lcd_dev, &db1200_eth_dev, &db1200_nand_dev, @@ -794,7 +783,9 @@ static struct platform_device *db1200_devs[] __initdata = { }; static struct platform_device *pb1200_devs[] __initdata = { +#ifdef CONFIG_MMC_AU1X &pb1200_mmc1_dev, +#endif }; /* Some peripheral base addresses differ on the PB1200 */ diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c index efb318e03..664a5a783 100644 --- a/arch/mips/alchemy/devboards/db1300.c +++ b/arch/mips/alchemy/devboards/db1300.c @@ -17,7 +17,6 @@ #include <linux/interrupt.h> #include <linux/ata_platform.h> #include <linux/mmc/host.h> -#include <linux/module.h> #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> @@ -449,6 +448,7 @@ static struct platform_device db1300_ide_dev = { /**********************************************************************/ +#ifdef CONFIG_MMC_AU1X static irqreturn_t db1300_mmc_cd(int irq, void *ptr) { disable_irq_nosync(irq); @@ -457,14 +457,7 @@ static irqreturn_t db1300_mmc_cd(int irq, void *ptr) static irqreturn_t db1300_mmc_cdfn(int irq, void *ptr) { - void (*mmc_cd)(struct mmc_host *, unsigned long); - - /* link against CONFIG_MMC=m. We can only be called once MMC core has - * initialized the controller, so symbol_get() should always succeed. - */ - mmc_cd = symbol_get(mmc_detect_change); - mmc_cd(ptr, msecs_to_jiffies(200)); - symbol_put(mmc_detect_change); + mmc_detect_change(ptr, msecs_to_jiffies(200)); msleep(100); /* debounce */ if (irq == DB1300_SD1_INSERT_INT) @@ -634,6 +627,7 @@ static struct platform_device db1300_sd0_dev = { .resource = au1300_sd0_res, .num_resources = ARRAY_SIZE(au1300_sd0_res), }; +#endif /* CONFIG_MMC_AU1X */ /**********************************************************************/ @@ -764,8 +758,10 @@ static struct platform_device *db1300_dev[] __initdata = { &db1300_5waysw_dev, &db1300_nand_dev, &db1300_ide_dev, +#ifdef CONFIG_MMC_AU1X &db1300_sd0_dev, &db1300_sd1_dev, +#endif &db1300_lcd_dev, &db1300_ac97_dev, &db1300_i2s_dev, |