1 files changed, 425 insertions, 0 deletions
diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h
new file mode 100644
index 000000000..81fae23ce
--- /dev/null
+++ b/arch/mips/include/asm/asm.h
@@ -0,0 +1,425 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle
+ * Copyright (C) 1999 by Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2002  Maciej W. Rozycki
+ *
+ * Some useful macros for MIPS assembler code
+ *
+ * Some of the routines below contain useless nops that will be optimized
+ * away by gas in -O mode. These nops are however required to fill delay
+ * slots in noreorder mode.
+ */
+#ifndef __ASM_ASM_H
+#define __ASM_ASM_H
+
+#include <asm/sgidefs.h>
+#include <asm/asm-eva.h>
+
+#ifndef CAT
+#ifdef __STDC__
+#define __CAT(str1, str2) str1##str2
+#else
+#define __CAT(str1, str2) str1/**/str2
+#endif
+#define CAT(str1, str2) __CAT(str1, str2)
+#endif
+
+/*
+ * PIC specific declarations
+ * Not used for the kernel but here seems to be the right place.
+ */
+#ifdef __PIC__
+#define CPRESTORE(register)				\
+		.cprestore register
+#define CPADD(register)					\
+		.cpadd	register
+#define CPLOAD(register)				\
+		.cpload register
+#else
+#define CPRESTORE(register)
+#define CPADD(register)
+#define CPLOAD(register)
+#endif
+
+/*
+ * LEAF - declare leaf routine
+ */
+#define LEAF(symbol)					\
+		.globl	symbol;				\
+		.align	2;				\
+		.type	symbol, @function;		\
+		.ent	symbol, 0;			\
+symbol:		.frame	sp, 0, ra;			\
+		.cfi_startproc;				\
+		.insn
+
+/*
+ * NESTED - declare nested routine entry point
+ */
+#define NESTED(symbol, framesize, rpc)			\
+		.globl	symbol;				\
+		.align	2;				\
+		.type	symbol, @function;		\
+		.ent	symbol, 0;			\
+symbol:		.frame	sp, framesize, rpc;		\
+		.cfi_startproc;				\
+		.insn
+
+/*
+ * END - mark end of function
+ */
+#define END(function)					\
+		.cfi_endproc;				\
+		.end	function;			\
+		.size	function, .-function
+
+/*
+ * EXPORT - export definition of symbol
+ */
+#define EXPORT(symbol)					\
+		.globl	symbol;				\
+symbol:
+
+/*
+ * FEXPORT - export definition of a function symbol
+ */
+#define FEXPORT(symbol)					\
+		.globl	symbol;				\
+		.type	symbol, @function;		\
+symbol:		.insn
+
+/*
+ * ABS - export absolute symbol
+ */
+#define ABS(symbol,value)				\
+		.globl	symbol;				\
+symbol		=	value
+
+#define PANIC(msg)					\
+		.set	push;				\
+		.set	reorder;			\
+		PTR_LA	a0, 8f;				 \
+		jal	panic;				\
+9:		b	9b;				\
+		.set	pop;				\
+		TEXT(msg)
+
+/*
+ * Print formatted string
+ */
+#ifdef CONFIG_PRINTK
+#define PRINT(string)					\
+		.set	push;				\
+		.set	reorder;			\
+		PTR_LA	a0, 8f;				 \
+		jal	printk;				\
+		.set	pop;				\
+		TEXT(string)
+#else
+#define PRINT(string)
+#endif
+
+#define TEXT(msg)					\
+		.pushsection .data;			\
+8:		.asciiz msg;				\
+		.popsection;
+
+/*
+ * Build text tables
+ */
+#define TTABLE(string)					\
+		.pushsection .text;			\
+		.word	1f;				\
+		.popsection				\
+		.pushsection .data;			\
+1:		.asciiz string;				\
+		.popsection
+
+/*
+ * MIPS IV pref instruction.
+ * Use with .set noreorder only!
+ *
+ * MIPS IV implementations are free to treat this as a nop.  The R5000
+ * is one of them.  So we should have an option not to use this instruction.
+ */
+#ifdef CONFIG_CPU_HAS_PREFETCH
+
+#define PREF(hint,addr)					\
+		.set	push;				\
+		.set	arch=r5000;			\
+		pref	hint, addr;			\
+		.set	pop
+
+#define PREFE(hint, addr)				\
+		.set	push;				\
+		.set	mips0;				\
+		.set	eva;				\
+		prefe	hint, addr;			\
+		.set	pop
+
+#define PREFX(hint,addr)				\
+		.set	push;				\
+		.set	arch=r5000;			\
+		prefx	hint, addr;			\
+		.set	pop
+
+#else /* !CONFIG_CPU_HAS_PREFETCH */
+
+#define PREF(hint, addr)
+#define PREFE(hint, addr)
+#define PREFX(hint, addr)
+
+#endif /* !CONFIG_CPU_HAS_PREFETCH */
+
+/*
+ * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs.
+ */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1)
+#define MOVN(rd, rs, rt)				\
+		.set	push;				\
+		.set	reorder;			\
+		beqz	rt, 9f;				\
+		move	rd, rs;				\
+		.set	pop;				\
+9:
+#define MOVZ(rd, rs, rt)				\
+		.set	push;				\
+		.set	reorder;			\
+		bnez	rt, 9f;				\
+		move	rd, rs;				\
+		.set	pop;				\
+9:
+#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3)
+#define MOVN(rd, rs, rt)				\
+		.set	push;				\
+		.set	noreorder;			\
+		bnezl	rt, 9f;				\
+		 move	rd, rs;				\
+		.set	pop;				\
+9:
+#define MOVZ(rd, rs, rt)				\
+		.set	push;				\
+		.set	noreorder;			\
+		beqzl	rt, 9f;				\
+		 move	rd, rs;				\
+		.set	pop;				\
+9:
+#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \
+    (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64)
+#define MOVN(rd, rs, rt)				\
+		movn	rd, rs, rt
+#define MOVZ(rd, rs, rt)				\
+		movz	rd, rs, rt
+#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */
+
+/*
+ * Stack alignment
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define ALSZ	7
+#define ALMASK	~7
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define ALSZ	15
+#define ALMASK	~15
+#endif
+
+/*
+ * Macros to handle different pointer/register sizes for 32/64-bit code
+ */
+
+/*
+ * Size of a register
+ */
+#ifdef __mips64
+#define SZREG	8
+#else
+#define SZREG	4
+#endif
+
+/*
+ * Use the following macros in assemblercode to load/store registers,
+ * pointers etc.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define REG_S		sw
+#define REG_L		lw
+#define REG_SUBU	subu
+#define REG_ADDU	addu
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define REG_S		sd
+#define REG_L		ld
+#define REG_SUBU	dsubu
+#define REG_ADDU	daddu
+#endif
+
+/*
+ * How to add/sub/load/store/shift C int variables.
+ */
+#if (_MIPS_SZINT == 32)
+#define INT_ADD		add
+#define INT_ADDU	addu
+#define INT_ADDI	addi
+#define INT_ADDIU	addiu
+#define INT_SUB		sub
+#define INT_SUBU	subu
+#define INT_L		lw
+#define INT_S		sw
+#define INT_SLL		sll
+#define INT_SLLV	sllv
+#define INT_SRL		srl
+#define INT_SRLV	srlv
+#define INT_SRA		sra
+#define INT_SRAV	srav
+#endif
+
+#if (_MIPS_SZINT == 64)
+#define INT_ADD		dadd
+#define INT_ADDU	daddu
+#define INT_ADDI	daddi
+#define INT_ADDIU	daddiu
+#define INT_SUB		dsub
+#define INT_SUBU	dsubu
+#define INT_L		ld
+#define INT_S		sd
+#define INT_SLL		dsll
+#define INT_SLLV	dsllv
+#define INT_SRL		dsrl
+#define INT_SRLV	dsrlv
+#define INT_SRA		dsra
+#define INT_SRAV	dsrav
+#endif
+
+/*
+ * How to add/sub/load/store/shift C long variables.
+ */
+#if (_MIPS_SZLONG == 32)
+#define LONG_ADD	add
+#define LONG_ADDU	addu
+#define LONG_ADDI	addi
+#define LONG_ADDIU	addiu
+#define LONG_SUB	sub
+#define LONG_SUBU	subu
+#define LONG_L		lw
+#define LONG_S		sw
+#define LONG_SP		swp
+#define LONG_SLL	sll
+#define LONG_SLLV	sllv
+#define LONG_SRL	srl
+#define LONG_SRLV	srlv
+#define LONG_SRA	sra
+#define LONG_SRAV	srav
+
+#define LONG		.word
+#define LONGSIZE	4
+#define LONGMASK	3
+#define LONGLOG		2
+#endif
+
+#if (_MIPS_SZLONG == 64)
+#define LONG_ADD	dadd
+#define LONG_ADDU	daddu
+#define LONG_ADDI	daddi
+#define LONG_ADDIU	daddiu
+#define LONG_SUB	dsub
+#define LONG_SUBU	dsubu
+#define LONG_L		ld
+#define LONG_S		sd
+#define LONG_SP		sdp
+#define LONG_SLL	dsll
+#define LONG_SLLV	dsllv
+#define LONG_SRL	dsrl
+#define LONG_SRLV	dsrlv
+#define LONG_SRA	dsra
+#define LONG_SRAV	dsrav
+
+#define LONG		.dword
+#define LONGSIZE	8
+#define LONGMASK	7
+#define LONGLOG		3
+#endif
+
+/*
+ * How to add/sub/load/store/shift pointers.
+ */
+#if (_MIPS_SZPTR == 32)
+#define PTR_ADD		add
+#define PTR_ADDU	addu
+#define PTR_ADDI	addi
+#define PTR_ADDIU	addiu
+#define PTR_SUB		sub
+#define PTR_SUBU	subu
+#define PTR_L		lw
+#define PTR_S		sw
+#define PTR_LA		la
+#define PTR_LI		li
+#define PTR_SLL		sll
+#define PTR_SLLV	sllv
+#define PTR_SRL		srl
+#define PTR_SRLV	srlv
+#define PTR_SRA		sra
+#define PTR_SRAV	srav
+
+#define PTR_SCALESHIFT	2
+
+#define PTR		.word
+#define PTRSIZE		4
+#define PTRLOG		2
+#endif
+
+#if (_MIPS_SZPTR == 64)
+#define PTR_ADD		dadd
+#define PTR_ADDU	daddu
+#define PTR_ADDI	daddi
+#define PTR_ADDIU	daddiu
+#define PTR_SUB		dsub
+#define PTR_SUBU	dsubu
+#define PTR_L		ld
+#define PTR_S		sd
+#define PTR_LA		dla
+#define PTR_LI		dli
+#define PTR_SLL		dsll
+#define PTR_SLLV	dsllv
+#define PTR_SRL		dsrl
+#define PTR_SRLV	dsrlv
+#define PTR_SRA		dsra
+#define PTR_SRAV	dsrav
+
+#define PTR_SCALESHIFT	3
+
+#define PTR		.dword
+#define PTRSIZE		8
+#define PTRLOG		3
+#endif
+
+/*
+ * Some cp0 registers were extended to 64bit for MIPS III.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define MFC0		mfc0
+#define MTC0		mtc0
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define MFC0		dmfc0
+#define MTC0		dmtc0
+#endif
+
+#define SSNOP		sll zero, zero, 1
+
+#ifdef CONFIG_SGI_IP28
+/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */
+#include <asm/cacheops.h>
+#define R10KCBARRIER(addr)  cache   Cache_Barrier, addr;
+#else
+#define R10KCBARRIER(addr)
+#endif
+
+#endif /* __ASM_ASM_H */