1 files changed, 90 insertions, 0 deletions
diff --git a/arch/mips/loongson32/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c
new file mode 100644
index 000000000..01aceaace
--- /dev/null
+++ b/arch/mips/loongson32/ls1b/board.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/leds.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sizes.h>
+
+#include <loongson1.h>
+#include <dma.h>
+#include <nand.h>
+#include <platform.h>
+
+struct plat_ls1x_dma ls1x_dma_pdata = {
+	.nr_channels	= 3,
+};
+
+static struct mtd_partition ls1x_nand_parts[] = {
+	{
+		.name        = "kernel",
+		.offset      = 0,
+		.size        = SZ_16M,
+	},
+	{
+		.name        = "rootfs",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = MTDPART_SIZ_FULL,
+	},
+};
+
+struct plat_ls1x_nand ls1x_nand_pdata = {
+	.parts		= ls1x_nand_parts,
+	.nr_parts	= ARRAY_SIZE(ls1x_nand_parts),
+	.hold_cycle	= 0x2,
+	.wait_cycle	= 0xc,
+};
+
+static const struct gpio_led ls1x_gpio_leds[] __initconst = {
+	{
+		.name			= "LED9",
+		.default_trigger	= "heartbeat",
+		.gpio			= 38,
+		.active_low		= 1,
+		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
+	}, {
+		.name			= "LED6",
+		.default_trigger	= "nand-disk",
+		.gpio			= 39,
+		.active_low		= 1,
+		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
+	},
+};
+
+static const struct gpio_led_platform_data ls1x_led_pdata __initconst = {
+	.num_leds	= ARRAY_SIZE(ls1x_gpio_leds),
+	.leds		= ls1x_gpio_leds,
+};
+
+static struct platform_device *ls1b_platform_devices[] __initdata = {
+	&ls1x_uart_pdev,
+	&ls1x_cpufreq_pdev,
+	&ls1x_dma_pdev,
+	&ls1x_eth0_pdev,
+	&ls1x_eth1_pdev,
+	&ls1x_ehci_pdev,
+	&ls1x_gpio0_pdev,
+	&ls1x_gpio1_pdev,
+	&ls1x_nand_pdev,
+	&ls1x_rtc_pdev,
+	&ls1x_wdt_pdev,
+};
+
+static int __init ls1b_platform_init(void)
+{
+	ls1x_serial_set_uartclk(&ls1x_uart_pdev);
+	ls1x_dma_set_platdata(&ls1x_dma_pdata);
+	ls1x_nand_set_platdata(&ls1x_nand_pdata);
+
+	gpio_led_register_device(-1, &ls1x_led_pdata);
+
+	return platform_add_devices(ls1b_platform_devices,
+				   ARRAY_SIZE(ls1b_platform_devices));
+}
+
+arch_initcall(ls1b_platform_init);