diff options
Diffstat (limited to 'arch/mips/loongson64')
51 files changed, 5824 insertions, 0 deletions
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig new file mode 100644 index 000000000..c865b4b9b --- /dev/null +++ b/arch/mips/loongson64/Kconfig @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: GPL-2.0 +if MACH_LOONGSON64 + +choice + prompt "Machine Type" + +config LEMOTE_FULOONG2E + bool "Lemote Fuloong(2e) mini-PC" + select ARCH_SPARSEMEM_ENABLE + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select CEVT_R4K + select CSRC_R4K + select SYS_HAS_CPU_LOONGSON2E + select DMA_NONCOHERENT + select BOOT_ELF32 + select BOARD_SCACHE + select HW_HAS_PCI + select I8259 + select ISA + select IRQ_MIPS_CPU + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_HAS_EARLY_PRINTK + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select CPU_HAS_WB + select LOONGSON_MC146818 + help + Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and + an FPGA northbridge + + Lemote Fuloong(2e) mini PC have a VIA686B south bridge. + +config LEMOTE_MACH2F + bool "Lemote Loongson 2F family machines" + select ARCH_SPARSEMEM_ENABLE + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select BOARD_SCACHE + select BOOT_ELF32 + select CEVT_R4K if ! MIPS_EXTERNAL_TIMER + select CPU_HAS_WB + select CS5536 + select CSRC_R4K if ! MIPS_EXTERNAL_TIMER + select DMA_NONCOHERENT + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select HAVE_CLK + select HW_HAS_PCI + select I8259 + select IRQ_MIPS_CPU + select ISA + select SYS_HAS_CPU_LOONGSON2F + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select LOONGSON_MC146818 + help + Lemote Loongson 2F family machines utilize the 2F revision of + Loongson processor and the AMD CS5536 south bridge. + + These family machines include fuloong2f mini PC, yeeloong2f notebook, + LingLoong allinone PC and so forth. + +config LOONGSON_MACH3X + bool "Generic Loongson 3 family machines" + select ARCH_SPARSEMEM_ENABLE + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select BOOT_ELF32 + select BOARD_SCACHE + select CSRC_R4K + select CEVT_R4K + select CPU_HAS_WB + select HW_HAS_PCI + select ISA + select HT_PCI + select I8259 + select IRQ_MIPS_CPU + select NR_CPUS_DEFAULT_4 + select SYS_HAS_CPU_LOONGSON3 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_HOTPLUG_CPU + select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select LOONGSON_MC146818 + select ZONE_DMA32 + select LEFI_FIRMWARE_INTERFACE + help + Generic Loongson 3 family machines utilize the 3A/3B revision + of Loongson processor and RS780/SBX00 chipset. +endchoice + +config CS5536 + bool + +config CS5536_MFGPT + bool "CS5536 MFGPT Timer" + depends on CS5536 && !HIGH_RES_TIMERS + select MIPS_EXTERNAL_TIMER + help + This option enables the mfgpt0 timer of AMD CS5536. With this timer + switched on you can not use high resolution timers. + + If you want to enable the Loongson2 CPUFreq Driver, Please enable + this option at first, otherwise, You will get wrong system time. + + If unsure, say Yes. + +config RS780_HPET + bool "RS780/SBX00 HPET Timer" + depends on LOONGSON_MACH3X + select MIPS_EXTERNAL_TIMER + help + This option enables the hpet timer of AMD RS780/SBX00. + + If you want to enable the Loongson3 CPUFreq Driver, Please enable + this option at first, otherwise, You will get wrong system time. + + If unsure, say Yes. + +config LOONGSON_UART_BASE + bool + default y + depends on EARLY_PRINTK || SERIAL_8250 + +config LOONGSON_MC146818 + bool + default n + +config LEFI_FIRMWARE_INTERFACE + bool + +endif # MACH_LOONGSON64 diff --git a/arch/mips/loongson64/Makefile b/arch/mips/loongson64/Makefile new file mode 100644 index 000000000..4fe3d88fc --- /dev/null +++ b/arch/mips/loongson64/Makefile @@ -0,0 +1,23 @@ +# +# Common code for all Loongson based systems +# + +obj-$(CONFIG_MACH_LOONGSON64) += common/ + +# +# Lemote Fuloong mini-PC (Loongson 2E-based) +# + +obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ + +# +# Lemote loongson2f family machines +# + +obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/ + +# +# All Loongson-3 family machines +# + +obj-$(CONFIG_CPU_LOONGSON3) += loongson-3/ diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform new file mode 100644 index 000000000..12abf14ae --- /dev/null +++ b/arch/mips/loongson64/Platform @@ -0,0 +1,58 @@ +# +# Loongson Processors' Support +# + +# Only gcc >= 4.4 have Loongson specific support +cflags-$(CONFIG_CPU_LOONGSON2) += -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON2E) += \ + $(call cc-option,-march=loongson2e,-march=r4600) +cflags-$(CONFIG_CPU_LOONGSON2F) += \ + $(call cc-option,-march=loongson2f,-march=r4600) +# Enable the workarounds for Loongson2f +ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS + ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),) + $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop) + else + cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop + endif + ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),) + $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump) + else + cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump + endif +endif + +cflags-$(CONFIG_CPU_LOONGSON3) += -Wa,--trap +# +# binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a +# as MIPS64 R2; older versions as just R1. This leaves the possibility open +# that GCC might generate R2 code for -march=loongson3a which then is rejected +# by GAS. The cc-option can't probe for this behaviour so -march=loongson3a +# can't easily be used safely within the kbuild framework. +# +ifeq ($(call cc-ifversion, -ge, 0409, y), y) + ifeq ($(call ld-ifversion, -ge, 225000000, y), y) + cflags-$(CONFIG_CPU_LOONGSON3) += \ + $(call cc-option,-march=loongson3a -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) + else + cflags-$(CONFIG_CPU_LOONGSON3) += \ + $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) + endif +else + cflags-$(CONFIG_CPU_LOONGSON3) += \ + $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) +endif + +# Some -march= flags enable MMI instructions, and GCC complains about that +# support being enabled alongside -msoft-float. Thus explicitly disable MMI. +cflags-y += $(call cc-option,-mno-loongson-mmi) + +# +# Loongson Machines' Support +# + +platform-$(CONFIG_MACH_LOONGSON64) += loongson64/ +cflags-$(CONFIG_MACH_LOONGSON64) += -I$(srctree)/arch/mips/include/asm/mach-loongson64 -mno-branch-likely +load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000 +load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000 +load-$(CONFIG_LOONGSON_MACH3X) += 0xffffffff80200000 diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile new file mode 100644 index 000000000..57ee03022 --- /dev/null +++ b/arch/mips/loongson64/common/Makefile @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for loongson based machines. +# + +obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ + bonito-irq.o mem.o machtype.o platform.o serial.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_CPU_LOONGSON2) += dma.o + +# +# Serial port support +# +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o +obj-$(CONFIG_LOONGSON_MC146818) += rtc.o + +# +# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure +# space +# +obj-$(CONFIG_CS5536) += cs5536/ + +# +# Suspend Support +# + +obj-$(CONFIG_SUSPEND) += pm.o diff --git a/arch/mips/loongson64/common/bonito-irq.c b/arch/mips/loongson64/common/bonito-irq.c new file mode 100644 index 000000000..4e116d23b --- /dev/null +++ b/arch/mips/loongson64/common/bonito-irq.c @@ -0,0 +1,53 @@ +/* + * Copyright 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) + * + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/interrupt.h> +#include <linux/compiler.h> + +#include <loongson.h> + +static inline void bonito_irq_enable(struct irq_data *d) +{ + LOONGSON_INTENSET = (1 << (d->irq - LOONGSON_IRQ_BASE)); + mmiowb(); +} + +static inline void bonito_irq_disable(struct irq_data *d) +{ + LOONGSON_INTENCLR = (1 << (d->irq - LOONGSON_IRQ_BASE)); + mmiowb(); +} + +static struct irq_chip bonito_irq_type = { + .name = "bonito_irq", + .irq_mask = bonito_irq_disable, + .irq_unmask = bonito_irq_enable, +}; + +static struct irqaction __maybe_unused dma_timeout_irqaction = { + .handler = no_action, + .name = "dma_timeout", +}; + +void bonito_irq_init(void) +{ + u32 i; + + for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++) + irq_set_chip_and_handler(i, &bonito_irq_type, + handle_level_irq); + +#ifdef CONFIG_CPU_LOONGSON2E + setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction); +#endif +} diff --git a/arch/mips/loongson64/common/cmdline.c b/arch/mips/loongson64/common/cmdline.c new file mode 100644 index 000000000..01fbed137 --- /dev/null +++ b/arch/mips/loongson64/common/cmdline.c @@ -0,0 +1,48 @@ +/* + * Based on Ocelot Linux port, which is + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * Copyright 2003 ICT CAS + * Author: Michael Guo <guoyi@ict.ac.cn> + * + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <asm/bootinfo.h> + +#include <loongson.h> + +void __init prom_init_cmdline(void) +{ + int prom_argc; + /* pmon passes arguments in 32bit pointers */ + int *_prom_argv; + int i; + long l; + + /* firmware arguments are initialized in head.S */ + prom_argc = fw_arg0; + _prom_argv = (int *)fw_arg1; + + /* arg[0] is "g", the rest is boot parameters */ + arcs_cmdline[0] = '\0'; + for (i = 1; i < prom_argc; i++) { + l = (long)_prom_argv[i]; + if (strlen(arcs_cmdline) + strlen(((char *)l) + 1) + >= sizeof(arcs_cmdline)) + break; + strcat(arcs_cmdline, ((char *)l)); + strcat(arcs_cmdline, " "); + } + + prom_init_machtype(); +} diff --git a/arch/mips/loongson64/common/cs5536/Makefile b/arch/mips/loongson64/common/cs5536/Makefile new file mode 100644 index 000000000..f12e64007 --- /dev/null +++ b/arch/mips/loongson64/common/cs5536/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for CS5536 support. +# + +obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \ + cs5536_isa.o cs5536_ehci.o + +# +# Enable cs5536 mfgpt Timer +# +obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o diff --git a/arch/mips/loongson64/common/cs5536/cs5536_acc.c b/arch/mips/loongson64/common/cs5536/cs5536_acc.c new file mode 100644 index 000000000..ab4d6cc57 --- /dev/null +++ b/arch/mips/loongson64/common/cs5536/cs5536_acc.c @@ -0,0 +1,140 @@ +/* + * the ACC Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +void pci_acc_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + lo |= (0x03 << 8); + else + lo &= ~(0x03 << 8); + _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_ACC_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + value &= 0xfffffffc; + hi = 0xA0000000 | ((value & 0x000ff000) >> 12); + lo = 0x000fff80 | ((value & 0x00000fff) << 20); + _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo); + } + break; + case PCI_ACC_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + /* disable all the usb interrupt in PIC */ + lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT); + if (value) /* enable all the acc interrupt in PIC */ + lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); + break; + default: + break; + } +} + +u32 pci_acc_read_reg(int reg) +{ + u32 hi, lo; + u32 conf_data = 0; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); + if (((lo & 0xfff00000) || (hi & 0x000000ff)) + && ((hi & 0xf0000000) == 0xa0000000)) + conf_data |= PCI_COMMAND_IO; + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if ((lo & 0x300) == 0x300) + conf_data |= PCI_COMMAND_MASTER; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_ACC_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_ACC_FLAG) { + conf_data = CS5536_ACC_RANGE | + PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~SOFT_BAR_ACC_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); + conf_data = (hi & 0x000000ff) << 12; + conf_data |= (lo & 0xfff00000) >> 20; + conf_data |= 0x01; + conf_data &= ~0x02; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR); + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ehci.c b/arch/mips/loongson64/common/cs5536/cs5536_ehci.c new file mode 100644 index 000000000..ec2e36026 --- /dev/null +++ b/arch/mips/loongson64/common/cs5536/cs5536_ehci.c @@ -0,0 +1,160 @@ +/* + * the EHCI Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +void pci_ehci_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + hi |= PCI_COMMAND_MASTER; + else + hi &= ~PCI_COMMAND_MASTER; + + if (value & PCI_COMMAND_MEMORY) + hi |= PCI_COMMAND_MEMORY; + else + hi &= ~PCI_COMMAND_MEMORY; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_EHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if ((value & 0x01) == 0x00) { + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + lo = value; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + + value &= 0xfffffff0; + hi = 0x40000000 | ((value & 0xff000000) >> 24); + lo = 0x000fffff | ((value & 0x00fff000) << 8); + _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo); + } + break; + case PCI_EHCI_LEGSMIEN_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + hi &= 0x003f0000; + hi |= (value & 0x3f) << 16; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + case PCI_EHCI_FLADJ_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + hi &= ~0x00003f00; + hi |= value & 0x00003f00; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + default: + break; + } +} + +u32 pci_ehci_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + if (hi & PCI_COMMAND_MASTER) + conf_data |= PCI_COMMAND_MASTER; + if (hi & PCI_COMMAND_MEMORY) + conf_data |= PCI_COMMAND_MEMORY; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_EHCI_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_EHCI_FLAG) { + conf_data = CS5536_EHCI_RANGE | + PCI_BASE_ADDRESS_SPACE_MEMORY; + lo &= ~SOFT_BAR_EHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = lo & 0xfffff000; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); + break; + case PCI_EHCI_LEGSMIEN_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = (hi & 0x003f0000) >> 16; + break; + case PCI_EHCI_LEGSMISTS_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = (hi & 0x3f000000) >> 24; + break; + case PCI_EHCI_FLADJ_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = hi & 0x00003f00; + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ide.c b/arch/mips/loongson64/common/cs5536/cs5536_ide.c new file mode 100644 index 000000000..a73414d9e --- /dev/null +++ b/arch/mips/loongson64/common/cs5536/cs5536_ide.c @@ -0,0 +1,192 @@ +/* + * the IDE Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +void pci_ide_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + lo |= (0x03 << 4); + else + lo &= ~(0x03 << 4); + _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_CACHE_LINE_SIZE: + value &= 0x0000ff00; + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0xffffff00; + hi |= (value >> 8); + _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); + break; + case PCI_BAR4_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_IDE_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); + lo = (value & 0xfffffff0) | 0x1; + _wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo); + + value &= 0xfffffffc; + hi = 0x60000000 | ((value & 0x000ff000) >> 12); + lo = 0x000ffff0 | ((value & 0x00000fff) << 20); + _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo); + } + break; + case PCI_IDE_CFG_REG: + if (value == CS5536_IDE_FLASH_SIGNATURE) { + _rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo); + lo |= 0x01; + _wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo); + } else { + _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo); + lo = value; + _wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo); + } + break; + case PCI_IDE_DTC_REG: + _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); + lo = value; + _wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo); + break; + case PCI_IDE_CAST_REG: + _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); + lo = value; + _wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo); + break; + case PCI_IDE_ETC_REG: + _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); + lo = value; + _wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo); + break; + case PCI_IDE_PM_REG: + _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); + lo = value; + _wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo); + break; + default: + break; + } +} + +u32 pci_ide_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); + if (lo & 0xfffffff0) + conf_data |= PCI_COMMAND_IO; + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if ((lo & 0x30) == 0x30) + conf_data |= PCI_COMMAND_MASTER; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_IDE_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0x000000f8; + conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi); + break; + case PCI_BAR4_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_IDE_FLAG) { + conf_data = CS5536_IDE_RANGE | + PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~SOFT_BAR_IDE_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); + conf_data = lo & 0xfffffff0; + conf_data |= 0x01; + conf_data &= ~0x02; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR); + break; + case PCI_IDE_CFG_REG: + _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_DTC_REG: + _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_CAST_REG: + _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_ETC_REG: + _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_PM_REG: + _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); + conf_data = lo; + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson64/common/cs5536/cs5536_isa.c b/arch/mips/loongson64/common/cs5536/cs5536_isa.c new file mode 100644 index 000000000..924be39e7 --- /dev/null +++ b/arch/mips/loongson64/common/cs5536/cs5536_isa.c @@ -0,0 +1,330 @@ +/* + * the ISA Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/pci.h> +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +/* common variables for PCI_ISA_READ/WRITE_BAR */ +static const u32 divil_msr_reg[6] = { + DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO), + DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ), + DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI), +}; + +static const u32 soft_bar_flag[6] = { + SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG, + SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG, +}; + +static const u32 sb_msr_reg[6] = { + SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2), + SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5), +}; + +static const u32 bar_space_range[6] = { + CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE, + CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE, +}; + +static const int bar_space_len[6] = { + CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH, + CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH, +}; + +/* + * enable the divil module bar space. + * + * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg + * and the RCONFx(0~5) reg to use the modules. + */ +static void divil_lbar_enable(void) +{ + u32 hi, lo; + int offset; + + /* + * The DIVIL IRQ is not used yet. and make the RCONF0 reserved. + */ + + for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { + _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); + hi |= 0x01; + _wrmsr(DIVIL_MSR_REG(offset), hi, lo); + } +} + +/* + * disable the divil module bar space. + */ +static void divil_lbar_disable(void) +{ + u32 hi, lo; + int offset; + + for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { + _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); + hi &= ~0x01; + _wrmsr(DIVIL_MSR_REG(offset), hi, lo); + } +} + +/* + * BAR write: write value to the n BAR + */ + +void pci_isa_write_bar(int n, u32 value) +{ + u32 hi = 0, lo = value; + + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= soft_bar_flag[n]; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + /* NATIVE reg */ + hi = 0x0000f001; + lo &= bar_space_range[n]; + _wrmsr(divil_msr_reg[n], hi, lo); + + /* RCONFx is 4bytes in units for I/O space */ + hi = ((value & 0x000ffffc) << 12) | + ((bar_space_len[n] - 4) << 12) | 0x01; + lo = ((value & 0x000ffffc) << 12) | 0x01; + _wrmsr(sb_msr_reg[n], hi, lo); + } +} + +/* + * BAR read: read the n BAR + */ + +u32 pci_isa_read_bar(int n) +{ + u32 conf_data = 0; + u32 hi, lo; + + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & soft_bar_flag[n]) { + conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~soft_bar_flag[n]; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(divil_msr_reg[n], &hi, &lo); + conf_data = lo & bar_space_range[n]; + conf_data |= 0x01; + conf_data &= ~0x02; + } + return conf_data; +} + +/* + * isa_write: ISA write transfer + * + * We assume that this is not a bus master transfer. + */ +void pci_isa_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + u32 temp; + + switch (reg) { + case PCI_COMMAND: + if (value & PCI_COMMAND_IO) + divil_lbar_enable(); + else + divil_lbar_disable(); + break; + case PCI_STATUS: + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + temp = lo & 0x0000ffff; + if ((value & PCI_STATUS_SIG_TARGET_ABORT) && + (lo & SB_TAS_ERR_EN)) + temp |= SB_TAS_ERR_FLAG; + + if ((value & PCI_STATUS_REC_TARGET_ABORT) && + (lo & SB_TAR_ERR_EN)) + temp |= SB_TAR_ERR_FLAG; + + if ((value & PCI_STATUS_REC_MASTER_ABORT) + && (lo & SB_MAR_ERR_EN)) + temp |= SB_MAR_ERR_FLAG; + + if ((value & PCI_STATUS_DETECTED_PARITY) + && (lo & SB_PARE_ERR_EN)) + temp |= SB_PARE_ERR_FLAG; + + lo = temp; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + break; + case PCI_CACHE_LINE_SIZE: + value &= 0x0000ff00; + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0xffffff00; + hi |= (value >> 8); + _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); + break; + case PCI_BAR0_REG: + pci_isa_write_bar(0, value); + break; + case PCI_BAR1_REG: + pci_isa_write_bar(1, value); + break; + case PCI_BAR2_REG: + pci_isa_write_bar(2, value); + break; + case PCI_BAR3_REG: + pci_isa_write_bar(3, value); + break; + case PCI_BAR4_REG: + pci_isa_write_bar(4, value); + break; + case PCI_BAR5_REG: + pci_isa_write_bar(5, value); + break; + case PCI_UART1_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); + /* disable uart1 interrupt in PIC */ + lo &= ~(0xf << 24); + if (value) /* enable uart1 interrupt in PIC */ + lo |= (CS5536_UART1_INTR << 24); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); + break; + case PCI_UART2_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); + /* disable uart2 interrupt in PIC */ + lo &= ~(0xf << 28); + if (value) /* enable uart2 interrupt in PIC */ + lo |= (CS5536_UART2_INTR << 28); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); + break; + case PCI_ISA_FIXUP_REG: + if (value) { + /* enable the TARGET ABORT/MASTER ABORT etc. */ + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + lo |= 0x00000063; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + + default: + /* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */ + break; + } +} + +/* + * isa_read: ISA read transfers + * + * We assume that this is not a bus master transfer. + */ +u32 pci_isa_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + /* we just check the first LBAR for the IO enable bit, */ + /* maybe we should changed later. */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo); + if (hi & 0x01) + conf_data |= PCI_COMMAND_IO; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + conf_data |= PCI_STATUS_FAST_BACK; + + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_TAS_ERR_FLAG) + conf_data |= PCI_STATUS_SIG_TARGET_ABORT; + if (lo & SB_TAR_ERR_FLAG) + conf_data |= PCI_STATUS_REC_TARGET_ABORT; + if (lo & SB_MAR_ERR_FLAG) + conf_data |= PCI_STATUS_REC_MASTER_ABORT; + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_DETECTED_PARITY; + break; + case PCI_CLASS_REVISION: + _rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_ISA_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0x000000f8; + conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi); + break; + /* + * we only use the LBAR of DIVIL, no RCONF used. + * all of them are IO space. + */ + case PCI_BAR0_REG: + return pci_isa_read_bar(0); + break; + case PCI_BAR1_REG: + return pci_isa_read_bar(1); + break; + case PCI_BAR2_REG: + return pci_isa_read_bar(2); + break; + case PCI_BAR3_REG: + break; + case PCI_BAR4_REG: + return pci_isa_read_bar(4); + break; + case PCI_BAR5_REG: + return pci_isa_read_bar(5); + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_POINTER; + break; + case PCI_INTERRUPT_LINE: + /* no interrupt used here */ + conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00); + break; + default: + break; + } + + return conf_data; +} + +/* + * The mfgpt timer interrupt is running early, so we must keep the south bridge + * mmio always enabled. Otherwise we may race with the PCI configuration which + * may temporarily disable it. When that happens and the timer interrupt fires, + * we are not able to clear it and the system will hang. + */ +static void cs5536_isa_mmio_always_on(struct pci_dev *dev) +{ + dev->mmio_always_on = 1; +} +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, + PCI_CLASS_BRIDGE_ISA, 8, cs5536_isa_mmio_always_on); diff --git a/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c new file mode 100644 index 000000000..a6adcc4f8 --- /dev/null +++ b/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c @@ -0,0 +1,211 @@ +/* + * CS5536 General timer functions + * + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Yanhua, yanh@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu zhangjin, wuzhangjin@gmail.com + * + * Reference: AMD Geode(TM) CS5536 Companion Device Data Book + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/io.h> +#include <linux/init.h> +#include <linux/export.h> +#include <linux/jiffies.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/clockchips.h> + +#include <asm/time.h> + +#include <cs5536/cs5536_mfgpt.h> + +static DEFINE_RAW_SPINLOCK(mfgpt_lock); + +static u32 mfgpt_base; + +/* + * Initialize the MFGPT timer. + * + * This is also called after resume to bring the MFGPT into operation again. + */ + +/* disable counter */ +void disable_mfgpt0_counter(void) +{ + outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP); +} +EXPORT_SYMBOL(disable_mfgpt0_counter); + +/* enable counter, comparator2 to event mode, 14.318MHz clock */ +void enable_mfgpt0_counter(void) +{ + outw(0xe310, MFGPT0_SETUP); +} +EXPORT_SYMBOL(enable_mfgpt0_counter); + +static int mfgpt_timer_set_periodic(struct clock_event_device *evt) +{ + raw_spin_lock(&mfgpt_lock); + + outw(COMPARE, MFGPT0_CMP2); /* set comparator2 */ + outw(0, MFGPT0_CNT); /* set counter to 0 */ + enable_mfgpt0_counter(); + + raw_spin_unlock(&mfgpt_lock); + return 0; +} + +static int mfgpt_timer_shutdown(struct clock_event_device *evt) +{ + if (clockevent_state_periodic(evt) || clockevent_state_oneshot(evt)) { + raw_spin_lock(&mfgpt_lock); + disable_mfgpt0_counter(); + raw_spin_unlock(&mfgpt_lock); + } + + return 0; +} + +static struct clock_event_device mfgpt_clockevent = { + .name = "mfgpt", + .features = CLOCK_EVT_FEAT_PERIODIC, + + /* The oneshot mode have very high deviation, don't use it! */ + .set_state_shutdown = mfgpt_timer_shutdown, + .set_state_periodic = mfgpt_timer_set_periodic, + .irq = CS5536_MFGPT_INTR, +}; + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + u32 basehi; + + /* + * get MFGPT base address + * + * NOTE: do not remove me, it's need for the value of mfgpt_base is + * variable + */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); + + /* ack */ + outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP); + + mfgpt_clockevent.event_handler(&mfgpt_clockevent); + + return IRQ_HANDLED; +} + +static struct irqaction irq5 = { + .handler = timer_interrupt, + .flags = IRQF_NOBALANCING | IRQF_TIMER, + .name = "timer" +}; + +/* + * Initialize the conversion factor and the min/max deltas of the clock event + * structure and register the clock event source with the framework. + */ +void __init setup_mfgpt0_timer(void) +{ + u32 basehi; + struct clock_event_device *cd = &mfgpt_clockevent; + unsigned int cpu = smp_processor_id(); + + cd->cpumask = cpumask_of(cpu); + clockevent_set_clock(cd, MFGPT_TICK_RATE); + cd->max_delta_ns = clockevent_delta2ns(0xffff, cd); + cd->max_delta_ticks = 0xffff; + cd->min_delta_ns = clockevent_delta2ns(0xf, cd); + cd->min_delta_ticks = 0xf; + + /* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */ + _wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100); + + /* Enable Interrupt Gate 5 */ + _wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000); + + /* get MFGPT base address */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); + + clockevents_register_device(cd); + + setup_irq(CS5536_MFGPT_INTR, &irq5); +} + +/* + * Since the MFGPT overflows every tick, its not very useful + * to just read by itself. So use jiffies to emulate a free + * running counter: + */ +static u64 mfgpt_read(struct clocksource *cs) +{ + unsigned long flags; + int count; + u32 jifs; + static int old_count; + static u32 old_jifs; + + raw_spin_lock_irqsave(&mfgpt_lock, flags); + /* + * Although our caller may have the read side of xtime_lock, + * this is now a seqlock, and we are cheating in this routine + * by having side effects on state that we cannot undo if + * there is a collision on the seqlock and our caller has to + * retry. (Namely, old_jifs and old_count.) So we must treat + * jiffies as volatile despite the lock. We read jiffies + * before latching the timer count to guarantee that although + * the jiffies value might be older than the count (that is, + * the counter may underflow between the last point where + * jiffies was incremented and the point where we latch the + * count), it cannot be newer. + */ + jifs = jiffies; + /* read the count */ + count = inw(MFGPT0_CNT); + + /* + * It's possible for count to appear to go the wrong way for this + * reason: + * + * The timer counter underflows, but we haven't handled the resulting + * interrupt and incremented jiffies yet. + * + * Previous attempts to handle these cases intelligently were buggy, so + * we just do the simple thing now. + */ + if (count < old_count && jifs == old_jifs) + count = old_count; + + old_count = count; + old_jifs = jifs; + + raw_spin_unlock_irqrestore(&mfgpt_lock, flags); + + return (u64) (jifs * COMPARE) + count; +} + +static struct clocksource clocksource_mfgpt = { + .name = "mfgpt", + .rating = 120, /* Functional for real use, but not desired */ + .read = mfgpt_read, + .mask = CLOCKSOURCE_MASK(32), +}; + +int __init init_mfgpt_clocksource(void) +{ + if (num_possible_cpus() > 1) /* MFGPT does not scale! */ + return 0; + + return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE); +} + +arch_initcall(init_mfgpt_clocksource); diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ohci.c b/arch/mips/loongson64/common/cs5536/cs5536_ohci.c new file mode 100644 index 000000000..92dc6bafc --- /dev/null +++ b/arch/mips/loongson64/common/cs5536/cs5536_ohci.c @@ -0,0 +1,149 @@ +/* + * the OHCI Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +void pci_ohci_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + hi |= PCI_COMMAND_MASTER; + else + hi &= ~PCI_COMMAND_MASTER; + + if (value & PCI_COMMAND_MEMORY) + hi |= PCI_COMMAND_MEMORY; + else + hi &= ~PCI_COMMAND_MEMORY; + _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_OHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if ((value & 0x01) == 0x00) { + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + lo = value; + _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); + + value &= 0xfffffff0; + hi = 0x40000000 | ((value & 0xff000000) >> 24); + lo = 0x000fffff | ((value & 0x00fff000) << 8); + _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo); + } + break; + case PCI_OHCI_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT); + if (value) /* enable all the usb interrupt in PIC */ + lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); + break; + default: + break; + } +} + +u32 pci_ohci_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + if (hi & PCI_COMMAND_MASTER) + conf_data |= PCI_COMMAND_MASTER; + if (hi & PCI_COMMAND_MEMORY) + conf_data |= PCI_COMMAND_MEMORY; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_OHCI_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_OHCI_FLAG) { + conf_data = CS5536_OHCI_RANGE | + PCI_BASE_ADDRESS_SPACE_MEMORY; + lo &= ~SOFT_BAR_OHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + conf_data = lo & 0xffffff00; + conf_data &= ~0x0000000f; /* 32bit mem */ + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); + break; + case PCI_OHCI_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + if (((lo >> PIC_YSEL_LOW_USB_SHIFT) & 0xf) == CS5536_USB_INTR) + conf_data = 1; + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson64/common/cs5536/cs5536_pci.c b/arch/mips/loongson64/common/cs5536/cs5536_pci.c new file mode 100644 index 000000000..b73972320 --- /dev/null +++ b/arch/mips/loongson64/common/cs5536/cs5536_pci.c @@ -0,0 +1,88 @@ +/* + * read/write operation to the PCI config space of CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * the Virtual Support Module(VSM) for virtulizing the PCI + * configure space are defined in cs5536_modulename.c respectively, + * + * after this virtulizing, user can access the PCI configure space + * directly as a normal multi-function PCI device which follows + * the PCI-2.2 spec. + */ + +#include <linux/types.h> +#include <cs5536/cs5536_pci.h> +#include <cs5536/cs5536_vsm.h> + +enum { + CS5536_FUNC_START = -1, + CS5536_ISA_FUNC, + reserved_func, + CS5536_IDE_FUNC, + CS5536_ACC_FUNC, + CS5536_OHCI_FUNC, + CS5536_EHCI_FUNC, + CS5536_FUNC_END, +}; + +static const cs5536_pci_vsm_write vsm_conf_write[] = { + [CS5536_ISA_FUNC] = pci_isa_write_reg, + [reserved_func] = NULL, + [CS5536_IDE_FUNC] = pci_ide_write_reg, + [CS5536_ACC_FUNC] = pci_acc_write_reg, + [CS5536_OHCI_FUNC] = pci_ohci_write_reg, + [CS5536_EHCI_FUNC] = pci_ehci_write_reg, +}; + +static const cs5536_pci_vsm_read vsm_conf_read[] = { + [CS5536_ISA_FUNC] = pci_isa_read_reg, + [reserved_func] = NULL, + [CS5536_IDE_FUNC] = pci_ide_read_reg, + [CS5536_ACC_FUNC] = pci_acc_read_reg, + [CS5536_OHCI_FUNC] = pci_ohci_read_reg, + [CS5536_EHCI_FUNC] = pci_ehci_read_reg, +}; + +/* + * write to PCI config space and transfer it to MSR write. + */ +void cs5536_pci_conf_write4(int function, int reg, u32 value) +{ + if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) + return; + if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0)) + return; + + if (vsm_conf_write[function] != NULL) + vsm_conf_write[function](reg, value); +} + +/* + * read PCI config space and transfer it to MSR access. + */ +u32 cs5536_pci_conf_read4(int function, int reg) +{ + u32 data = 0; + + if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) + return 0; + if ((reg < 0) || ((reg & 0x03) != 0)) + return 0; + if (reg > 0x100) + return 0xffffffff; + + if (vsm_conf_read[function] != NULL) + data = vsm_conf_read[function](reg); + + return data; +} diff --git a/arch/mips/loongson64/common/dma.c b/arch/mips/loongson64/common/dma.c new file mode 100644 index 000000000..48f04126b --- /dev/null +++ b/arch/mips/loongson64/common/dma.c @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/dma-direct.h> + +dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + return paddr | 0x80000000; +} + +phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr) +{ +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT) + if (dma_addr > 0x8fffffff) + return dma_addr; + return dma_addr & 0x0fffffff; +#else + return dma_addr & 0x7fffffff; +#endif +} diff --git a/arch/mips/loongson64/common/early_printk.c b/arch/mips/loongson64/common/early_printk.c new file mode 100644 index 000000000..a782e2b24 --- /dev/null +++ b/arch/mips/loongson64/common/early_printk.c @@ -0,0 +1,42 @@ +/* early printk support + * + * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> + * Copyright (c) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/serial_reg.h> +#include <asm/setup.h> + +#include <loongson.h> + +#define PORT(base, offset) (u8 *)(base + offset) + +static inline unsigned int serial_in(unsigned char *base, int offset) +{ + return readb(PORT(base, offset)); +} + +static inline void serial_out(unsigned char *base, int offset, int value) +{ + writeb(value, PORT(base, offset)); +} + +void prom_putchar(char c) +{ + int timeout; + unsigned char *uart_base; + + uart_base = (unsigned char *)_loongson_uart_base[0]; + timeout = 1024; + + while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) && + (timeout-- > 0)) + ; + + serial_out(uart_base, UART_TX, c); +} diff --git a/arch/mips/loongson64/common/env.c b/arch/mips/loongson64/common/env.c new file mode 100644 index 000000000..8f68ee02a --- /dev/null +++ b/arch/mips/loongson64/common/env.c @@ -0,0 +1,215 @@ +/* + * Based on Ocelot Linux port, which is + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * Copyright 2003 ICT CAS + * Author: Michael Guo <guoyi@ict.ac.cn> + * + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/export.h> +#include <asm/bootinfo.h> +#include <loongson.h> +#include <boot_param.h> +#include <workarounds.h> + +u32 cpu_clock_freq; +EXPORT_SYMBOL(cpu_clock_freq); +struct efi_memory_map_loongson *loongson_memmap; +struct loongson_system_configuration loongson_sysconf; + +u64 loongson_chipcfg[MAX_PACKAGES] = {0xffffffffbfc00180}; +u64 loongson_chiptemp[MAX_PACKAGES]; +u64 loongson_freqctrl[MAX_PACKAGES]; + +unsigned long long smp_group[4]; + +#define parse_even_earlier(res, option, p) \ +do { \ + unsigned int tmp __maybe_unused; \ + \ + if (strncmp(option, (char *)p, strlen(option)) == 0) \ + tmp = kstrtou32((char *)p + strlen(option"="), 10, &res); \ +} while (0) + +void __init prom_init_env(void) +{ + /* pmon passes arguments in 32bit pointers */ + unsigned int processor_id; + +#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE + int *_prom_envp; + long l; + + /* firmware arguments are initialized in head.S */ + _prom_envp = (int *)fw_arg2; + + l = (long)*_prom_envp; + while (l != 0) { + parse_even_earlier(cpu_clock_freq, "cpuclock", l); + parse_even_earlier(memsize, "memsize", l); + parse_even_earlier(highmemsize, "highmemsize", l); + _prom_envp++; + l = (long)*_prom_envp; + } + if (memsize == 0) + memsize = 256; + + loongson_sysconf.nr_uarts = 1; + + pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize); +#else + struct boot_params *boot_p; + struct loongson_params *loongson_p; + struct system_loongson *esys; + struct efi_cpuinfo_loongson *ecpu; + struct irq_source_routing_table *eirq_source; + + /* firmware arguments are initialized in head.S */ + boot_p = (struct boot_params *)fw_arg2; + loongson_p = &(boot_p->efi.smbios.lp); + + esys = (struct system_loongson *) + ((u64)loongson_p + loongson_p->system_offset); + ecpu = (struct efi_cpuinfo_loongson *) + ((u64)loongson_p + loongson_p->cpu_offset); + eirq_source = (struct irq_source_routing_table *) + ((u64)loongson_p + loongson_p->irq_offset); + loongson_memmap = (struct efi_memory_map_loongson *) + ((u64)loongson_p + loongson_p->memory_offset); + + cpu_clock_freq = ecpu->cpu_clock_freq; + loongson_sysconf.cputype = ecpu->cputype; + switch (ecpu->cputype) { + case Legacy_3A: + case Loongson_3A: + loongson_sysconf.cores_per_node = 4; + loongson_sysconf.cores_per_package = 4; + smp_group[0] = 0x900000003ff01000; + smp_group[1] = 0x900010003ff01000; + smp_group[2] = 0x900020003ff01000; + smp_group[3] = 0x900030003ff01000; + loongson_chipcfg[0] = 0x900000001fe00180; + loongson_chipcfg[1] = 0x900010001fe00180; + loongson_chipcfg[2] = 0x900020001fe00180; + loongson_chipcfg[3] = 0x900030001fe00180; + loongson_chiptemp[0] = 0x900000001fe0019c; + loongson_chiptemp[1] = 0x900010001fe0019c; + loongson_chiptemp[2] = 0x900020001fe0019c; + loongson_chiptemp[3] = 0x900030001fe0019c; + loongson_freqctrl[0] = 0x900000001fe001d0; + loongson_freqctrl[1] = 0x900010001fe001d0; + loongson_freqctrl[2] = 0x900020001fe001d0; + loongson_freqctrl[3] = 0x900030001fe001d0; + loongson_sysconf.ht_control_base = 0x90000EFDFB000000; + loongson_sysconf.workarounds = WORKAROUND_CPUFREQ; + break; + case Legacy_3B: + case Loongson_3B: + loongson_sysconf.cores_per_node = 4; /* One chip has 2 nodes */ + loongson_sysconf.cores_per_package = 8; + smp_group[0] = 0x900000003ff01000; + smp_group[1] = 0x900010003ff05000; + smp_group[2] = 0x900020003ff09000; + smp_group[3] = 0x900030003ff0d000; + loongson_chipcfg[0] = 0x900000001fe00180; + loongson_chipcfg[1] = 0x900020001fe00180; + loongson_chipcfg[2] = 0x900040001fe00180; + loongson_chipcfg[3] = 0x900060001fe00180; + loongson_chiptemp[0] = 0x900000001fe0019c; + loongson_chiptemp[1] = 0x900020001fe0019c; + loongson_chiptemp[2] = 0x900040001fe0019c; + loongson_chiptemp[3] = 0x900060001fe0019c; + loongson_freqctrl[0] = 0x900000001fe001d0; + loongson_freqctrl[1] = 0x900020001fe001d0; + loongson_freqctrl[2] = 0x900040001fe001d0; + loongson_freqctrl[3] = 0x900060001fe001d0; + loongson_sysconf.ht_control_base = 0x90001EFDFB000000; + loongson_sysconf.workarounds = WORKAROUND_CPUHOTPLUG; + break; + default: + loongson_sysconf.cores_per_node = 1; + loongson_sysconf.cores_per_package = 1; + loongson_chipcfg[0] = 0x900000001fe00180; + } + + loongson_sysconf.nr_cpus = ecpu->nr_cpus; + loongson_sysconf.boot_cpu_id = ecpu->cpu_startup_core_id; + loongson_sysconf.reserved_cpus_mask = ecpu->reserved_cores_mask; + if (ecpu->nr_cpus > NR_CPUS || ecpu->nr_cpus == 0) + loongson_sysconf.nr_cpus = NR_CPUS; + loongson_sysconf.nr_nodes = (loongson_sysconf.nr_cpus + + loongson_sysconf.cores_per_node - 1) / + loongson_sysconf.cores_per_node; + + loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr; + loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr; + loongson_sysconf.pci_io_base = eirq_source->pci_io_start_addr; + loongson_sysconf.dma_mask_bits = eirq_source->dma_mask_bits; + if (loongson_sysconf.dma_mask_bits < 32 || + loongson_sysconf.dma_mask_bits > 64) + loongson_sysconf.dma_mask_bits = 32; + + loongson_sysconf.restart_addr = boot_p->reset_system.ResetWarm; + loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown; + loongson_sysconf.suspend_addr = boot_p->reset_system.DoSuspend; + + loongson_sysconf.vgabios_addr = boot_p->efi.smbios.vga_bios; + pr_debug("Shutdown Addr: %llx, Restart Addr: %llx, VBIOS Addr: %llx\n", + loongson_sysconf.poweroff_addr, loongson_sysconf.restart_addr, + loongson_sysconf.vgabios_addr); + + memset(loongson_sysconf.ecname, 0, 32); + if (esys->has_ec) + memcpy(loongson_sysconf.ecname, esys->ec_name, 32); + loongson_sysconf.workarounds |= esys->workarounds; + + loongson_sysconf.nr_uarts = esys->nr_uarts; + if (esys->nr_uarts < 1 || esys->nr_uarts > MAX_UARTS) + loongson_sysconf.nr_uarts = 1; + memcpy(loongson_sysconf.uarts, esys->uarts, + sizeof(struct uart_device) * loongson_sysconf.nr_uarts); + + loongson_sysconf.nr_sensors = esys->nr_sensors; + if (loongson_sysconf.nr_sensors > MAX_SENSORS) + loongson_sysconf.nr_sensors = 0; + if (loongson_sysconf.nr_sensors) + memcpy(loongson_sysconf.sensors, esys->sensors, + sizeof(struct sensor_device) * loongson_sysconf.nr_sensors); +#endif + if (cpu_clock_freq == 0) { + processor_id = (¤t_cpu_data)->processor_id; + switch (processor_id & PRID_REV_MASK) { + case PRID_REV_LOONGSON2E: + cpu_clock_freq = 533080000; + break; + case PRID_REV_LOONGSON2F: + cpu_clock_freq = 797000000; + break; + case PRID_REV_LOONGSON3A_R1: + case PRID_REV_LOONGSON3A_R2: + case PRID_REV_LOONGSON3A_R3_0: + case PRID_REV_LOONGSON3A_R3_1: + cpu_clock_freq = 900000000; + break; + case PRID_REV_LOONGSON3B_R1: + case PRID_REV_LOONGSON3B_R2: + cpu_clock_freq = 1000000000; + break; + default: + cpu_clock_freq = 100000000; + break; + } + } + pr_info("CpuClock = %u\n", cpu_clock_freq); +} diff --git a/arch/mips/loongson64/common/init.c b/arch/mips/loongson64/common/init.c new file mode 100644 index 000000000..6ef171207 --- /dev/null +++ b/arch/mips/loongson64/common/init.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/bootmem.h> +#include <asm/bootinfo.h> +#include <asm/traps.h> +#include <asm/smp-ops.h> +#include <asm/cacheflush.h> + +#include <loongson.h> + +/* Loongson CPU address windows config space base address */ +unsigned long __maybe_unused _loongson_addrwincfg_base; + +static void __init mips_nmi_setup(void) +{ + void *base; + extern char except_vec_nmi; + + base = (void *)(CAC_BASE + 0x380); + memcpy(base, &except_vec_nmi, 0x80); + flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); +} + +void __init prom_init(void) +{ +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + _loongson_addrwincfg_base = (unsigned long) + ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE); +#endif + + prom_init_cmdline(); + prom_init_env(); + + /* init base address of io space */ + set_io_port_base((unsigned long) + ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); + +#ifdef CONFIG_NUMA + prom_init_numa_memory(); +#else + prom_init_memory(); +#endif + + /*init the uart base address */ + prom_init_uart_base(); + register_smp_ops(&loongson3_smp_ops); + board_nmi_handler_setup = mips_nmi_setup; +} + +void __init prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/loongson64/common/irq.c b/arch/mips/loongson64/common/irq.c new file mode 100644 index 000000000..d36d969a4 --- /dev/null +++ b/arch/mips/loongson64/common/irq.c @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <loongson.h> +/* + * the first level int-handler will jump here if it is a bonito irq + */ +void bonito_irqdispatch(void) +{ + u32 int_status; + int i; + + /* workaround the IO dma problem: let cpu looping to allow DMA finish */ + int_status = LOONGSON_INTISR; + while (int_status & (1 << 10)) { + udelay(1); + int_status = LOONGSON_INTISR; + } + + /* Get pending sources, masked by current enables */ + int_status = LOONGSON_INTISR & LOONGSON_INTEN; + + if (int_status) { + i = __ffs(int_status); + do_IRQ(LOONGSON_IRQ_BASE + i); + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending; + + pending = read_c0_cause() & read_c0_status() & ST0_IM; + + /* machine-specific plat_irq_dispatch */ + mach_irq_dispatch(pending); +} + +void __init arch_init_irq(void) +{ + /* + * Clear all of the interrupts while we change the able around a bit. + * int-handler is not on bootstrap + */ + clear_c0_status(ST0_IM | ST0_BEV); + + /* no steer */ + LOONGSON_INTSTEER = 0; + + /* + * Mask out all interrupt by writing "1" to all bit position in + * the interrupt reset reg. + */ + LOONGSON_INTENCLR = ~0; + + /* machine specific irq init */ + mach_init_irq(); +} diff --git a/arch/mips/loongson64/common/machtype.c b/arch/mips/loongson64/common/machtype.c new file mode 100644 index 000000000..f2807bc66 --- /dev/null +++ b/arch/mips/loongson64/common/machtype.c @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/errno.h> +#include <asm/bootinfo.h> + +#include <loongson.h> +#include <machine.h> + +/* please ensure the length of the machtype string is less than 50 */ +#define MACHTYPE_LEN 50 + +static const char *system_types[] = { + [MACH_LOONGSON_UNKNOWN] = "unknown loongson machine", + [MACH_LEMOTE_FL2E] = "lemote-fuloong-2e-box", + [MACH_LEMOTE_FL2F] = "lemote-fuloong-2f-box", + [MACH_LEMOTE_ML2F7] = "lemote-mengloong-2f-7inches", + [MACH_LEMOTE_YL2F89] = "lemote-yeeloong-2f-8.9inches", + [MACH_DEXXON_GDIUM2F10] = "dexxon-gdium-2f", + [MACH_LEMOTE_NAS] = "lemote-nas-2f", + [MACH_LEMOTE_LL2F] = "lemote-lynloong-2f", + [MACH_LOONGSON_GENERIC] = "generic-loongson-machine", + [MACH_LOONGSON_END] = NULL, +}; + +const char *get_system_type(void) +{ + return system_types[mips_machtype]; +} + +void __weak __init mach_prom_init_machtype(void) +{ +} + +void __init prom_init_machtype(void) +{ + char *p, str[MACHTYPE_LEN + 1]; + int machtype = MACH_LEMOTE_FL2E; + + mips_machtype = LOONGSON_MACHTYPE; + + p = strstr(arcs_cmdline, "machtype="); + if (!p) { + mach_prom_init_machtype(); + return; + } + p += strlen("machtype="); + strncpy(str, p, MACHTYPE_LEN); + str[MACHTYPE_LEN] = '\0'; + p = strstr(str, " "); + if (p) + *p = '\0'; + + for (; system_types[machtype]; machtype++) + if (strstr(system_types[machtype], str)) { + mips_machtype = machtype; + break; + } +} diff --git a/arch/mips/loongson64/common/mem.c b/arch/mips/loongson64/common/mem.c new file mode 100644 index 000000000..c549e525f --- /dev/null +++ b/arch/mips/loongson64/common/mem.c @@ -0,0 +1,161 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/fs.h> +#include <linux/fcntl.h> +#include <linux/mm.h> + +#include <asm/bootinfo.h> + +#include <loongson.h> +#include <boot_param.h> +#include <mem.h> +#include <pci.h> + +#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE + +u32 memsize, highmemsize; + +void __init prom_init_memory(void) +{ + add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); + + add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << + 20), BOOT_MEM_RESERVED); + +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + { + int bit; + + bit = fls(memsize + highmemsize); + if (bit != ffs(memsize + highmemsize)) + bit += 20; + else + bit = bit + 20 - 1; + + /* set cpu window3 to map CPU to DDR: 2G -> 2G */ + LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul, + 0x80000000ul, (1 << bit)); + mmiowb(); + } +#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ + +#ifdef CONFIG_64BIT + if (highmemsize > 0) + add_memory_region(LOONGSON_HIGHMEM_START, + highmemsize << 20, BOOT_MEM_RAM); + + add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START - + LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED); + +#endif /* !CONFIG_64BIT */ +} + +#else /* CONFIG_LEFI_FIRMWARE_INTERFACE */ + +void __init prom_init_memory(void) +{ + int i; + u32 node_id; + u32 mem_type; + + /* parse memory information */ + for (i = 0; i < loongson_memmap->nr_map; i++) { + node_id = loongson_memmap->map[i].node_id; + mem_type = loongson_memmap->map[i].mem_type; + + if (node_id == 0) { + switch (mem_type) { + case SYSTEM_RAM_LOW: + add_memory_region(loongson_memmap->map[i].mem_start, + (u64)loongson_memmap->map[i].mem_size << 20, + BOOT_MEM_RAM); + break; + case SYSTEM_RAM_HIGH: + add_memory_region(loongson_memmap->map[i].mem_start, + (u64)loongson_memmap->map[i].mem_size << 20, + BOOT_MEM_RAM); + break; + case SYSTEM_RAM_RESERVED: + add_memory_region(loongson_memmap->map[i].mem_start, + (u64)loongson_memmap->map[i].mem_size << 20, + BOOT_MEM_RESERVED); + break; + } + } + } +} + +#endif /* CONFIG_LEFI_FIRMWARE_INTERFACE */ + +/* override of arch/mips/mm/cache.c: __uncached_access */ +int __uncached_access(struct file *file, unsigned long addr) +{ + if (file->f_flags & O_DSYNC) + return 1; + + return addr >= __pa(high_memory) || + ((addr >= LOONGSON_MMIO_MEM_START) && + (addr < LOONGSON_MMIO_MEM_END)); +} + +#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED + +#include <linux/pci.h> +#include <linux/sched.h> +#include <asm/current.h> + +static unsigned long uca_start, uca_end; + +pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot) +{ + unsigned long offset = pfn << PAGE_SHIFT; + unsigned long end = offset + size; + + if (__uncached_access(file, offset)) { + if (uca_start && (offset >= uca_start) && + (end <= uca_end)) + return __pgprot((pgprot_val(vma_prot) & + ~_CACHE_MASK) | + _CACHE_UNCACHED_ACCELERATED); + else + return pgprot_noncached(vma_prot); + } + return vma_prot; +} + +static int __init find_vga_mem_init(void) +{ + struct pci_dev *dev = 0; + struct resource *r; + int idx; + + if (uca_start) + return 0; + + for_each_pci_dev(dev) { + if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { + for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { + r = &dev->resource[idx]; + if (!r->start && r->end) + continue; + if (r->flags & IORESOURCE_IO) + continue; + if (r->flags & IORESOURCE_MEM) { + uca_start = r->start; + uca_end = r->end; + return 0; + } + } + } + } + + return 0; +} + +late_initcall(find_vga_mem_init); +#endif /* !CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED */ diff --git a/arch/mips/loongson64/common/pci.c b/arch/mips/loongson64/common/pci.c new file mode 100644 index 000000000..4e2575643 --- /dev/null +++ b/arch/mips/loongson64/common/pci.c @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/pci.h> + +#include <pci.h> +#include <loongson.h> +#include <boot_param.h> + +static struct resource loongson_pci_mem_resource = { + .name = "pci memory space", + .start = LOONGSON_PCI_MEM_START, + .end = LOONGSON_PCI_MEM_END, + .flags = IORESOURCE_MEM, +}; + +static struct resource loongson_pci_io_resource = { + .name = "pci io space", + .start = LOONGSON_PCI_IO_START, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + +static struct pci_controller loongson_pci_controller = { + .pci_ops = &loongson_pci_ops, + .io_resource = &loongson_pci_io_resource, + .mem_resource = &loongson_pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_offset = 0x00000000UL, +}; + +static void __init setup_pcimap(void) +{ + /* + * local to PCI mapping for CPU accessing PCI space + * CPU address space [256M,448M] is window for accessing pci space + * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M] + * + * pcimap: PCI_MAP2 PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0 + * [<2G] [384M,448M] [320M,384M] [0M,64M] + */ + LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 | + LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) | + LOONGSON_PCIMAP_WIN(1, LOONGSON_PCILO1_BASE) | + LOONGSON_PCIMAP_WIN(0, 0); + + /* + * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M] + */ + LOONGSON_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */ + /* size: 256M, burst transmission, pre-fetch enable, 64bit */ + LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul; + LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful; + LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */ + LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul; + LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */ + LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul; + + /* avoid deadlock of PCI reading/writing lock operation */ + LOONGSON_PCI_ISR4C = 0xd2000001ul; + + /* can not change gnt to break pci transfer when device's gnt not + deassert for some broken device */ + LOONGSON_PXARB_CFG = 0x00fe0105ul; + +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + /* + * set cpu addr window2 to map CPU address space to PCI address space + */ + LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC, + LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE); +#endif +} + +extern int sbx00_acpi_init(void); + +static int __init pcibios_init(void) +{ + setup_pcimap(); + + loongson_pci_controller.io_map_base = mips_io_port_base; +#ifdef CONFIG_LEFI_FIRMWARE_INTERFACE + loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr; + loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr; +#endif + register_pci_controller(&loongson_pci_controller); + +#ifdef CONFIG_CPU_LOONGSON3 + sbx00_acpi_init(); +#endif + + return 0; +} + +arch_initcall(pcibios_init); diff --git a/arch/mips/loongson64/common/platform.c b/arch/mips/loongson64/common/platform.c new file mode 100644 index 000000000..0ed38321a --- /dev/null +++ b/arch/mips/loongson64/common/platform.c @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/err.h> +#include <linux/smp.h> +#include <linux/platform_device.h> + +static struct platform_device loongson2_cpufreq_device = { + .name = "loongson2_cpufreq", + .id = -1, +}; + +static int __init loongson2_cpufreq_init(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + /* Only 2F revision and it's successors support CPUFreq */ + if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F) + return platform_device_register(&loongson2_cpufreq_device); + + return -ENODEV; +} + +arch_initcall(loongson2_cpufreq_init); diff --git a/arch/mips/loongson64/common/pm.c b/arch/mips/loongson64/common/pm.c new file mode 100644 index 000000000..a6b67ccfc --- /dev/null +++ b/arch/mips/loongson64/common/pm.c @@ -0,0 +1,161 @@ +/* + * loongson-specific suspend support + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin <wuzhangjin@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/suspend.h> +#include <linux/interrupt.h> +#include <linux/pm.h> + +#include <asm/i8259.h> +#include <asm/mipsregs.h> + +#include <loongson.h> + +static unsigned int __maybe_unused cached_master_mask; /* i8259A */ +static unsigned int __maybe_unused cached_slave_mask; +static unsigned int __maybe_unused cached_bonito_irq_mask; /* bonito */ + +void arch_suspend_disable_irqs(void) +{ + /* disable all mips events */ + local_irq_disable(); + +#ifdef CONFIG_I8259 + /* disable all events of i8259A */ + cached_slave_mask = inb(PIC_SLAVE_IMR); + cached_master_mask = inb(PIC_MASTER_IMR); + + outb(0xff, PIC_SLAVE_IMR); + inb(PIC_SLAVE_IMR); + outb(0xff, PIC_MASTER_IMR); + inb(PIC_MASTER_IMR); +#endif + /* disable all events of bonito */ + cached_bonito_irq_mask = LOONGSON_INTEN; + LOONGSON_INTENCLR = 0xffff; + (void)LOONGSON_INTENCLR; +} + +void arch_suspend_enable_irqs(void) +{ + /* enable all mips events */ + local_irq_enable(); +#ifdef CONFIG_I8259 + /* only enable the cached events of i8259A */ + outb(cached_slave_mask, PIC_SLAVE_IMR); + outb(cached_master_mask, PIC_MASTER_IMR); +#endif + /* enable all cached events of bonito */ + LOONGSON_INTENSET = cached_bonito_irq_mask; + (void)LOONGSON_INTENSET; +} + +/* + * Setup the board-specific events for waking up loongson from wait mode + */ +void __weak setup_wakeup_events(void) +{ +} + +/* + * Check wakeup events + */ +int __weak wakeup_loongson(void) +{ + return 1; +} + +/* + * If the events are really what we want to wakeup the CPU, wake it up + * otherwise put the CPU asleep again. + */ +static void wait_for_wakeup_events(void) +{ + while (!wakeup_loongson()) + LOONGSON_CHIPCFG(0) &= ~0x7; +} + +/* + * Stop all perf counters + * + * $24 is the control register of Loongson perf counter + */ +static inline void stop_perf_counters(void) +{ + __write_64bit_c0_register($24, 0, 0); +} + + +static void loongson_suspend_enter(void) +{ + static unsigned int cached_cpu_freq; + + /* setup wakeup events via enabling the IRQs */ + setup_wakeup_events(); + + stop_perf_counters(); + + cached_cpu_freq = LOONGSON_CHIPCFG(0); + + /* Put CPU into wait mode */ + LOONGSON_CHIPCFG(0) &= ~0x7; + + /* wait for the given events to wakeup cpu from wait mode */ + wait_for_wakeup_events(); + + LOONGSON_CHIPCFG(0) = cached_cpu_freq; + mmiowb(); +} + +void __weak mach_suspend(void) +{ +} + +void __weak mach_resume(void) +{ +} + +static int loongson_pm_enter(suspend_state_t state) +{ + mach_suspend(); + + /* processor specific suspend */ + loongson_suspend_enter(); + + mach_resume(); + + return 0; +} + +static int loongson_pm_valid_state(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_ON: + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + return 1; + + default: + return 0; + } +} + +static const struct platform_suspend_ops loongson_pm_ops = { + .valid = loongson_pm_valid_state, + .enter = loongson_pm_enter, +}; + +static int __init loongson_pm_init(void) +{ + suspend_set_ops(&loongson_pm_ops); + + return 0; +} +arch_initcall(loongson_pm_init); diff --git a/arch/mips/loongson64/common/reset.c b/arch/mips/loongson64/common/reset.c new file mode 100644 index 000000000..b26892ce8 --- /dev/null +++ b/arch/mips/loongson64/common/reset.c @@ -0,0 +1,97 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * Copyright (C) 2009 Lemote, Inc. + * Author: Zhangjin Wu, wuzhangjin@gmail.com + */ +#include <linux/init.h> +#include <linux/pm.h> + +#include <asm/idle.h> +#include <asm/reboot.h> + +#include <loongson.h> +#include <boot_param.h> + +static inline void loongson_reboot(void) +{ +#ifndef CONFIG_CPU_JUMP_WORKAROUNDS + ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); +#else + void (*func)(void); + + func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4); + + __asm__ __volatile__( + " .set noat \n" + " jr %[func] \n" + " .set at \n" + : /* No outputs */ + : [func] "r" (func)); +#endif +} + +static void loongson_restart(char *command) +{ +#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE + /* do preparation for reboot */ + mach_prepare_reboot(); + + /* reboot via jumping to boot base address */ + loongson_reboot(); +#else + void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr; + + fw_restart(); + while (1) { + if (cpu_wait) + cpu_wait(); + } +#endif +} + +static void loongson_poweroff(void) +{ +#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE + mach_prepare_shutdown(); + + /* + * It needs a wait loop here, but mips/kernel/reset.c already calls + * a generic delay loop, machine_hang(), so simply return. + */ + return; +#else + void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr; + + fw_poweroff(); + while (1) { + if (cpu_wait) + cpu_wait(); + } +#endif +} + +static void loongson_halt(void) +{ + pr_notice("\n\n** You can safely turn off the power now **\n\n"); + while (1) { + if (cpu_wait) + cpu_wait(); + } +} + +static int __init mips_reboot_setup(void) +{ + _machine_restart = loongson_restart; + _machine_halt = loongson_halt; + pm_power_off = loongson_poweroff; + + return 0; +} + +arch_initcall(mips_reboot_setup); diff --git a/arch/mips/loongson64/common/rtc.c b/arch/mips/loongson64/common/rtc.c new file mode 100644 index 000000000..b5709af09 --- /dev/null +++ b/arch/mips/loongson64/common/rtc.c @@ -0,0 +1,43 @@ +/* + * Lemote Fuloong platform support + * + * Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mc146818rtc.h> + +static struct resource loongson_rtc_resources[] = { + { + .start = RTC_PORT(0), + .end = RTC_PORT(1), + .flags = IORESOURCE_IO, + }, { + .start = RTC_IRQ, + .end = RTC_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device loongson_rtc_device = { + .name = "rtc_cmos", + .id = -1, + .resource = loongson_rtc_resources, + .num_resources = ARRAY_SIZE(loongson_rtc_resources), +}; + + +static int __init loongson_rtc_platform_init(void) +{ + platform_device_register(&loongson_rtc_device); + return 0; +} + +device_initcall(loongson_rtc_platform_init); diff --git a/arch/mips/loongson64/common/serial.c b/arch/mips/loongson64/common/serial.c new file mode 100644 index 000000000..98c3a7feb --- /dev/null +++ b/arch/mips/loongson64/common/serial.c @@ -0,0 +1,117 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Yan hua (yanhua@lemote.com) + * Author: Wu Zhangjin (wuzhangjin@gmail.com) + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/serial_8250.h> + +#include <asm/bootinfo.h> + +#include <loongson.h> +#include <machine.h> + +#define PORT(int, clk) \ +{ \ + .irq = int, \ + .uartclk = clk, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +#define PORT_M(int, clk) \ +{ \ + .irq = MIPS_CPU_IRQ_BASE + (int), \ + .uartclk = clk, \ + .iotype = UPIO_MEM, \ + .membase = (void __iomem *)NULL, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +static struct plat_serial8250_port uart8250_data[][MAX_UARTS + 1] = { + [MACH_LOONGSON_UNKNOWN] = {}, + [MACH_LEMOTE_FL2E] = {PORT(4, 1843200), {} }, + [MACH_LEMOTE_FL2F] = {PORT(3, 1843200), {} }, + [MACH_LEMOTE_ML2F7] = {PORT_M(3, 3686400), {} }, + [MACH_LEMOTE_YL2F89] = {PORT_M(3, 3686400), {} }, + [MACH_DEXXON_GDIUM2F10] = {PORT_M(3, 3686400), {} }, + [MACH_LEMOTE_NAS] = {PORT_M(3, 3686400), {} }, + [MACH_LEMOTE_LL2F] = {PORT(3, 1843200), {} }, + [MACH_LOONGSON_GENERIC] = {PORT_M(2, 25000000), {} }, + [MACH_LOONGSON_END] = {}, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, +}; + +static int __init serial_init(void) +{ + int i; + unsigned char iotype; + + iotype = uart8250_data[mips_machtype][0].iotype; + + if (UPIO_MEM == iotype) { + uart8250_data[mips_machtype][0].mapbase = + loongson_uart_base[0]; + uart8250_data[mips_machtype][0].membase = + (void __iomem *)_loongson_uart_base[0]; + } + else if (UPIO_PORT == iotype) + uart8250_data[mips_machtype][0].iobase = + loongson_uart_base[0] - LOONGSON_PCIIO_BASE; + + if (loongson_sysconf.uarts[0].uartclk) + uart8250_data[mips_machtype][0].uartclk = + loongson_sysconf.uarts[0].uartclk; + + for (i = 1; i < loongson_sysconf.nr_uarts; i++) { + iotype = loongson_sysconf.uarts[i].iotype; + uart8250_data[mips_machtype][i].iotype = iotype; + loongson_uart_base[i] = loongson_sysconf.uarts[i].uart_base; + + if (UPIO_MEM == iotype) { + uart8250_data[mips_machtype][i].irq = + MIPS_CPU_IRQ_BASE + loongson_sysconf.uarts[i].int_offset; + uart8250_data[mips_machtype][i].mapbase = + loongson_uart_base[i]; + uart8250_data[mips_machtype][i].membase = + ioremap_nocache(loongson_uart_base[i], 8); + } else if (UPIO_PORT == iotype) { + uart8250_data[mips_machtype][i].irq = + loongson_sysconf.uarts[i].int_offset; + uart8250_data[mips_machtype][i].iobase = + loongson_uart_base[i] - LOONGSON_PCIIO_BASE; + } + + uart8250_data[mips_machtype][i].uartclk = + loongson_sysconf.uarts[i].uartclk; + uart8250_data[mips_machtype][i].flags = + UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; + } + + memset(&uart8250_data[mips_machtype][loongson_sysconf.nr_uarts], + 0, sizeof(struct plat_serial8250_port)); + uart8250_device.dev.platform_data = uart8250_data[mips_machtype]; + + return platform_device_register(&uart8250_device); +} +module_init(serial_init); + +static void __exit serial_exit(void) +{ + platform_device_unregister(&uart8250_device); +} +module_exit(serial_exit); diff --git a/arch/mips/loongson64/common/setup.c b/arch/mips/loongson64/common/setup.c new file mode 100644 index 000000000..332387678 --- /dev/null +++ b/arch/mips/loongson64/common/setup.c @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/export.h> +#include <linux/init.h> + +#include <asm/wbflush.h> +#include <asm/bootinfo.h> + +#include <loongson.h> + +#ifdef CONFIG_VT +#include <linux/console.h> +#include <linux/screen_info.h> +#endif + +static void wbflush_loongson(void) +{ + asm(".set\tpush\n\t" + ".set\tnoreorder\n\t" + ".set mips3\n\t" + "sync\n\t" + "nop\n\t" + ".set\tpop\n\t" + ".set mips0\n\t"); +} + +void (*__wbflush)(void) = wbflush_loongson; +EXPORT_SYMBOL(__wbflush); + +void __init plat_mem_setup(void) +{ +#ifdef CONFIG_VT +#if defined(CONFIG_VGA_CONSOLE) + conswitchp = &vga_con; + + screen_info = (struct screen_info) { + .orig_x = 0, + .orig_y = 25, + .orig_video_cols = 80, + .orig_video_lines = 25, + .orig_video_isVGA = VIDEO_TYPE_VGAC, + .orig_video_points = 16, + }; +#elif defined(CONFIG_DUMMY_CONSOLE) + conswitchp = &dummy_con; +#endif +#endif +} diff --git a/arch/mips/loongson64/common/time.c b/arch/mips/loongson64/common/time.c new file mode 100644 index 000000000..0ba53c55f --- /dev/null +++ b/arch/mips/loongson64/common/time.c @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <asm/mc146818-time.h> +#include <asm/time.h> +#include <asm/hpet.h> + +#include <loongson.h> +#include <cs5536/cs5536_mfgpt.h> + +void __init plat_time_init(void) +{ + /* setup mips r4k timer */ + mips_hpt_frequency = cpu_clock_freq / 2; + +#ifdef CONFIG_RS780_HPET + setup_hpet_timer(); +#else + setup_mfgpt0_timer(); +#endif +} + +void read_persistent_clock64(struct timespec64 *ts) +{ + ts->tv_sec = mc146818_get_cmos_time(); + ts->tv_nsec = 0; +} diff --git a/arch/mips/loongson64/common/uart_base.c b/arch/mips/loongson64/common/uart_base.c new file mode 100644 index 000000000..d27c41b23 --- /dev/null +++ b/arch/mips/loongson64/common/uart_base.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/export.h> +#include <asm/bootinfo.h> + +#include <loongson.h> + +/* raw */ +unsigned long loongson_uart_base[MAX_UARTS] = {}; +/* ioremapped */ +unsigned long _loongson_uart_base[MAX_UARTS] = {}; + +EXPORT_SYMBOL(loongson_uart_base); +EXPORT_SYMBOL(_loongson_uart_base); + +void prom_init_loongson_uart_base(void) +{ + switch (mips_machtype) { + case MACH_LOONGSON_GENERIC: + /* The CPU provided serial port (CPU) */ + loongson_uart_base[0] = LOONGSON_REG_BASE + 0x1e0; + break; + case MACH_LEMOTE_FL2E: + loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x3f8; + break; + case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_LL2F: + loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x2f8; + break; + case MACH_LEMOTE_ML2F7: + case MACH_LEMOTE_YL2F89: + case MACH_DEXXON_GDIUM2F10: + case MACH_LEMOTE_NAS: + default: + /* The CPU provided serial port (LPC) */ + loongson_uart_base[0] = LOONGSON_LIO1_BASE + 0x3f8; + break; + } + + _loongson_uart_base[0] = + (unsigned long)ioremap_nocache(loongson_uart_base[0], 8); +} diff --git a/arch/mips/loongson64/fuloong-2e/Makefile b/arch/mips/loongson64/fuloong-2e/Makefile new file mode 100644 index 000000000..b7622720c --- /dev/null +++ b/arch/mips/loongson64/fuloong-2e/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for Lemote Fuloong2e mini-PC board. +# + +obj-y += irq.o reset.o diff --git a/arch/mips/loongson64/fuloong-2e/irq.c b/arch/mips/loongson64/fuloong-2e/irq.c new file mode 100644 index 000000000..892963f86 --- /dev/null +++ b/arch/mips/loongson64/fuloong-2e/irq.c @@ -0,0 +1,69 @@ +/* + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/interrupt.h> + +#include <asm/irq_cpu.h> +#include <asm/i8259.h> + +#include <loongson.h> + +static void i8259_irqdispatch(void) +{ + int irq; + + irq = i8259_irq(); + if (irq >= 0) + do_IRQ(irq); + else + spurious_interrupt(); +} + +asmlinkage void mach_irq_dispatch(unsigned int pending) +{ + if (pending & CAUSEF_IP7) + do_IRQ(MIPS_CPU_IRQ_BASE + 7); + else if (pending & CAUSEF_IP6) /* perf counter loverflow */ + do_perfcnt_IRQ(); + else if (pending & CAUSEF_IP5) + i8259_irqdispatch(); + else if (pending & CAUSEF_IP2) + bonito_irqdispatch(); + else + spurious_interrupt(); +} + +static struct irqaction cascade_irqaction = { + .handler = no_action, + .name = "cascade", + .flags = IRQF_NO_THREAD, +}; + +void __init mach_init_irq(void) +{ + /* init all controller + * 0-15 ------> i8259 interrupt + * 16-23 ------> mips cpu interrupt + * 32-63 ------> bonito irq + */ + + /* most bonito irq should be level triggered */ + LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR | + LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES; + + /* Sets the first-level interrupt dispatcher. */ + mips_cpu_irq_init(); + init_i8259_irqs(); + bonito_irq_init(); + + /* bonito irq at IP2 */ + setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction); + /* 8259 irq at IP5 */ + setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction); +} diff --git a/arch/mips/loongson64/fuloong-2e/reset.c b/arch/mips/loongson64/fuloong-2e/reset.c new file mode 100644 index 000000000..da4d2ae2a --- /dev/null +++ b/arch/mips/loongson64/fuloong-2e/reset.c @@ -0,0 +1,23 @@ +/* Board-specific reboot/shutdown routines + * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <loongson.h> + +void mach_prepare_reboot(void) +{ + LOONGSON_GENCFG &= ~(1 << 2); + LOONGSON_GENCFG |= (1 << 2); +} + +void mach_prepare_shutdown(void) +{ +} diff --git a/arch/mips/loongson64/lemote-2f/Makefile b/arch/mips/loongson64/lemote-2f/Makefile new file mode 100644 index 000000000..08b8abcbf --- /dev/null +++ b/arch/mips/loongson64/lemote-2f/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for lemote loongson2f family machines +# + +obj-y += clock.o machtype.o irq.o reset.o ec_kb3310b.o + +# +# Suspend Support +# + +obj-$(CONFIG_SUSPEND) += pm.o diff --git a/arch/mips/loongson64/lemote-2f/clock.c b/arch/mips/loongson64/lemote-2f/clock.c new file mode 100644 index 000000000..8281334df --- /dev/null +++ b/arch/mips/loongson64/lemote-2f/clock.c @@ -0,0 +1,143 @@ +/* + * Copyright (C) 2006 - 2008 Lemote Inc. & Institute of Computing Technology + * Author: Yanhua, yanh@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/errno.h> +#include <linux/export.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> + +#include <asm/clock.h> +#include <asm/mach-loongson64/loongson.h> + +static LIST_HEAD(clock_list); +static DEFINE_SPINLOCK(clock_lock); +static DEFINE_MUTEX(clock_list_sem); + +/* Minimum CLK support */ +enum { + DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT, + DC_87PT, DC_DISABLE, DC_RESV +}; + +struct cpufreq_frequency_table loongson2_clockmod_table[] = { + {0, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {0, DC_ZERO, CPUFREQ_ENTRY_INVALID}, + {0, DC_25PT, 0}, + {0, DC_37PT, 0}, + {0, DC_50PT, 0}, + {0, DC_62PT, 0}, + {0, DC_75PT, 0}, + {0, DC_87PT, 0}, + {0, DC_DISABLE, 0}, + {0, DC_RESV, CPUFREQ_TABLE_END}, +}; +EXPORT_SYMBOL_GPL(loongson2_clockmod_table); + +static struct clk cpu_clk = { + .name = "cpu_clk", + .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, + .rate = 800000000, +}; + +struct clk *clk_get(struct device *dev, const char *id) +{ + return &cpu_clk; +} +EXPORT_SYMBOL(clk_get); + +static void propagate_rate(struct clk *clk) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clock_list, node) { + if (likely(clkp->parent != clk)) + continue; + if (likely(clkp->ops && clkp->ops->recalc)) + clkp->ops->recalc(clkp); + if (unlikely(clkp->flags & CLK_RATE_PROPAGATES)) + propagate_rate(clkp); + } +} + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + if (!clk) + return 0; + + return (unsigned long)clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int rate_khz = rate / 1000; + struct cpufreq_frequency_table *pos; + int ret = 0; + int regval; + + if (likely(clk->ops && clk->ops->set_rate)) { + unsigned long flags; + + spin_lock_irqsave(&clock_lock, flags); + ret = clk->ops->set_rate(clk, rate, 0); + spin_unlock_irqrestore(&clock_lock, flags); + } + + if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) + propagate_rate(clk); + + cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table) + if (rate_khz == pos->frequency) + break; + if (rate_khz != pos->frequency) + return -ENOTSUPP; + + clk->rate = rate; + + regval = LOONGSON_CHIPCFG(0); + regval = (regval & ~0x7) | (pos->driver_data - 1); + LOONGSON_CHIPCFG(0) = regval; + + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (likely(clk->ops && clk->ops->round_rate)) { + unsigned long flags, rounded; + + spin_lock_irqsave(&clock_lock, flags); + rounded = clk->ops->round_rate(clk, rate); + spin_unlock_irqrestore(&clock_lock, flags); + + return rounded; + } + + return rate; +} +EXPORT_SYMBOL_GPL(clk_round_rate); diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c b/arch/mips/loongson64/lemote-2f/ec_kb3310b.c new file mode 100644 index 000000000..321822997 --- /dev/null +++ b/arch/mips/loongson64/lemote-2f/ec_kb3310b.c @@ -0,0 +1,129 @@ +/* + * Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook + * + * Copyright (C) 2008 Lemote Inc. + * Author: liujl <liujl@lemote.com>, 2008-04-20 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/io.h> +#include <linux/export.h> +#include <linux/spinlock.h> +#include <linux/delay.h> + +#include "ec_kb3310b.h" + +static DEFINE_SPINLOCK(index_access_lock); +static DEFINE_SPINLOCK(port_access_lock); + +unsigned char ec_read(unsigned short addr) +{ + unsigned char value; + unsigned long flags; + + spin_lock_irqsave(&index_access_lock, flags); + outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); + outb((addr & 0x00ff), EC_IO_PORT_LOW); + value = inb(EC_IO_PORT_DATA); + spin_unlock_irqrestore(&index_access_lock, flags); + + return value; +} +EXPORT_SYMBOL_GPL(ec_read); + +void ec_write(unsigned short addr, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&index_access_lock, flags); + outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); + outb((addr & 0x00ff), EC_IO_PORT_LOW); + outb(val, EC_IO_PORT_DATA); + /* flush the write action */ + inb(EC_IO_PORT_DATA); + spin_unlock_irqrestore(&index_access_lock, flags); +} +EXPORT_SYMBOL_GPL(ec_write); + +/* + * This function is used for EC command writes and corresponding status queries. + */ +int ec_query_seq(unsigned char cmd) +{ + int timeout; + unsigned char status; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&port_access_lock, flags); + + /* make chip goto reset mode */ + udelay(EC_REG_DELAY); + outb(cmd, EC_CMD_PORT); + udelay(EC_REG_DELAY); + + /* check if the command is received by ec */ + timeout = EC_CMD_TIMEOUT; + status = inb(EC_STS_PORT); + while (timeout-- && (status & (1 << 1))) { + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + } + + spin_unlock_irqrestore(&port_access_lock, flags); + + if (timeout <= 0) { + printk(KERN_ERR "%s: deadable error : timeout...\n", __func__); + ret = -EINVAL; + } else + printk(KERN_INFO + "(%x/%d)ec issued command %d status : 0x%x\n", + timeout, EC_CMD_TIMEOUT - timeout, cmd, status); + + return ret; +} +EXPORT_SYMBOL_GPL(ec_query_seq); + +/* + * Send query command to EC to get the proper event number + */ +int ec_query_event_num(void) +{ + return ec_query_seq(CMD_GET_EVENT_NUM); +} +EXPORT_SYMBOL(ec_query_event_num); + +/* + * Get event number from EC + * + * NOTE: This routine must follow the query_event_num function in the + * interrupt. + */ +int ec_get_event_num(void) +{ + int timeout = 100; + unsigned char value; + unsigned char status; + + udelay(EC_REG_DELAY); + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + while (timeout-- && !(status & (1 << 0))) { + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + } + if (timeout <= 0) { + pr_info("%s: get event number timeout.\n", __func__); + + return -EINVAL; + } + value = inb(EC_DAT_PORT); + udelay(EC_REG_DELAY); + + return value; +} +EXPORT_SYMBOL(ec_get_event_num); diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h b/arch/mips/loongson64/lemote-2f/ec_kb3310b.h new file mode 100644 index 000000000..5a3f1860d --- /dev/null +++ b/arch/mips/loongson64/lemote-2f/ec_kb3310b.h @@ -0,0 +1,188 @@ +/* + * KB3310B Embedded Controller + * + * Copyright (C) 2008 Lemote Inc. + * Author: liujl <liujl@lemote.com>, 2008-03-14 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _EC_KB3310B_H +#define _EC_KB3310B_H + +extern unsigned char ec_read(unsigned short addr); +extern void ec_write(unsigned short addr, unsigned char val); +extern int ec_query_seq(unsigned char cmd); +extern int ec_query_event_num(void); +extern int ec_get_event_num(void); + +typedef int (*sci_handler) (int status); +extern sci_handler yeeloong_report_lid_status; + +#define SCI_IRQ_NUM 0x0A + +/* + * The following registers are determined by the EC index configuration. + * 1, fill the PORT_HIGH as EC register high part. + * 2, fill the PORT_LOW as EC register low part. + * 3, fill the PORT_DATA as EC register write data or get the data from it. + */ +#define EC_IO_PORT_HIGH 0x0381 +#define EC_IO_PORT_LOW 0x0382 +#define EC_IO_PORT_DATA 0x0383 + +/* + * EC delay time is 500us for register and status access + */ +#define EC_REG_DELAY 500 /* unit : us */ +#define EC_CMD_TIMEOUT 0x1000 + +/* + * EC access port for SCI communication + */ +#define EC_CMD_PORT 0x66 +#define EC_STS_PORT 0x66 +#define EC_DAT_PORT 0x62 +#define CMD_INIT_IDLE_MODE 0xdd +#define CMD_EXIT_IDLE_MODE 0xdf +#define CMD_INIT_RESET_MODE 0xd8 +#define CMD_REBOOT_SYSTEM 0x8c +#define CMD_GET_EVENT_NUM 0x84 +#define CMD_PROGRAM_PIECE 0xda + +/* temperature & fan registers */ +#define REG_TEMPERATURE_VALUE 0xF458 +#define REG_FAN_AUTO_MAN_SWITCH 0xF459 +#define BIT_FAN_AUTO 0 +#define BIT_FAN_MANUAL 1 +#define REG_FAN_CONTROL 0xF4D2 +#define BIT_FAN_CONTROL_ON (1 << 0) +#define BIT_FAN_CONTROL_OFF (0 << 0) +#define REG_FAN_STATUS 0xF4DA +#define BIT_FAN_STATUS_ON (1 << 0) +#define BIT_FAN_STATUS_OFF (0 << 0) +#define REG_FAN_SPEED_HIGH 0xFE22 +#define REG_FAN_SPEED_LOW 0xFE23 +#define REG_FAN_SPEED_LEVEL 0xF4CC +/* fan speed divider */ +#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/ + +/* battery registers */ +#define REG_BAT_DESIGN_CAP_HIGH 0xF77D +#define REG_BAT_DESIGN_CAP_LOW 0xF77E +#define REG_BAT_FULLCHG_CAP_HIGH 0xF780 +#define REG_BAT_FULLCHG_CAP_LOW 0xF781 +#define REG_BAT_DESIGN_VOL_HIGH 0xF782 +#define REG_BAT_DESIGN_VOL_LOW 0xF783 +#define REG_BAT_CURRENT_HIGH 0xF784 +#define REG_BAT_CURRENT_LOW 0xF785 +#define REG_BAT_VOLTAGE_HIGH 0xF786 +#define REG_BAT_VOLTAGE_LOW 0xF787 +#define REG_BAT_TEMPERATURE_HIGH 0xF788 +#define REG_BAT_TEMPERATURE_LOW 0xF789 +#define REG_BAT_RELATIVE_CAP_HIGH 0xF492 +#define REG_BAT_RELATIVE_CAP_LOW 0xF493 +#define REG_BAT_VENDOR 0xF4C4 +#define FLAG_BAT_VENDOR_SANYO 0x01 +#define FLAG_BAT_VENDOR_SIMPLO 0x02 +#define REG_BAT_CELL_COUNT 0xF4C6 +#define FLAG_BAT_CELL_3S1P 0x03 +#define FLAG_BAT_CELL_3S2P 0x06 +#define REG_BAT_CHARGE 0xF4A2 +#define FLAG_BAT_CHARGE_DISCHARGE 0x01 +#define FLAG_BAT_CHARGE_CHARGE 0x02 +#define FLAG_BAT_CHARGE_ACPOWER 0x00 +#define REG_BAT_STATUS 0xF4B0 +#define BIT_BAT_STATUS_LOW (1 << 5) +#define BIT_BAT_STATUS_DESTROY (1 << 2) +#define BIT_BAT_STATUS_FULL (1 << 1) +#define BIT_BAT_STATUS_IN (1 << 0) +#define REG_BAT_CHARGE_STATUS 0xF4B1 +#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2) +#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1) +#define REG_BAT_STATE 0xF482 +#define BIT_BAT_STATE_CHARGING (1 << 1) +#define BIT_BAT_STATE_DISCHARGING (1 << 0) +#define REG_BAT_POWER 0xF440 +#define BIT_BAT_POWER_S3 (1 << 2) +#define BIT_BAT_POWER_ON (1 << 1) +#define BIT_BAT_POWER_ACIN (1 << 0) + +/* other registers */ +/* Audio: rd/wr */ +#define REG_AUDIO_VOLUME 0xF46C +#define REG_AUDIO_MUTE 0xF4E7 +#define REG_AUDIO_BEEP 0xF4D0 +/* USB port power or not: rd/wr */ +#define REG_USB0_FLAG 0xF461 +#define REG_USB1_FLAG 0xF462 +#define REG_USB2_FLAG 0xF463 +#define BIT_USB_FLAG_ON 1 +#define BIT_USB_FLAG_OFF 0 +/* LID */ +#define REG_LID_DETECT 0xF4BD +#define BIT_LID_DETECT_ON 1 +#define BIT_LID_DETECT_OFF 0 +/* CRT */ +#define REG_CRT_DETECT 0xF4AD +#define BIT_CRT_DETECT_PLUG 1 +#define BIT_CRT_DETECT_UNPLUG 0 +/* LCD backlight brightness adjust: 9 levels */ +#define REG_DISPLAY_BRIGHTNESS 0xF4F5 +/* Black screen Status */ +#define BIT_DISPLAY_LCD_ON 1 +#define BIT_DISPLAY_LCD_OFF 0 +/* LCD backlight control: off/restore */ +#define REG_BACKLIGHT_CTRL 0xF7BD +#define BIT_BACKLIGHT_ON 1 +#define BIT_BACKLIGHT_OFF 0 +/* Reset the machine auto-clear: rd/wr */ +#define REG_RESET 0xF4EC +#define BIT_RESET_ON 1 +/* Light the led: rd/wr */ +#define REG_LED 0xF4C8 +#define BIT_LED_RED_POWER (1 << 0) +#define BIT_LED_ORANGE_POWER (1 << 1) +#define BIT_LED_GREEN_CHARGE (1 << 2) +#define BIT_LED_RED_CHARGE (1 << 3) +#define BIT_LED_NUMLOCK (1 << 4) +/* Test led mode, all led on/off */ +#define REG_LED_TEST 0xF4C2 +#define BIT_LED_TEST_IN 1 +#define BIT_LED_TEST_OUT 0 +/* Camera on/off */ +#define REG_CAMERA_STATUS 0xF46A +#define BIT_CAMERA_STATUS_ON 1 +#define BIT_CAMERA_STATUS_OFF 0 +#define REG_CAMERA_CONTROL 0xF7B7 +#define BIT_CAMERA_CONTROL_OFF 0 +#define BIT_CAMERA_CONTROL_ON 1 +/* Wlan Status */ +#define REG_WLAN 0xF4FA +#define BIT_WLAN_ON 1 +#define BIT_WLAN_OFF 0 +#define REG_DISPLAY_LCD 0xF79F + +/* SCI Event Number from EC */ +enum { + EVENT_LID = 0x23, /* LID open/close */ + EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */ + EVENT_SLEEP, /* Fn+F1 for entering sleep mode */ + EVENT_OVERTEMP, /* Over-temperature happened */ + EVENT_CRT_DETECT, /* CRT is connected */ + EVENT_CAMERA, /* Camera on/off */ + EVENT_USB_OC2, /* USB2 Over Current occurred */ + EVENT_USB_OC0, /* USB0 Over Current occurred */ + EVENT_BLACK_SCREEN, /* Turn on/off backlight */ + EVENT_AUDIO_MUTE, /* Mute on/off */ + EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */ + EVENT_AC_BAT, /* AC & Battery relative issue */ + EVENT_AUDIO_VOLUME, /* Volume adjust */ + EVENT_WLAN, /* Wlan on/off */ + EVENT_END +}; + +#endif /* !_EC_KB3310B_H */ diff --git a/arch/mips/loongson64/lemote-2f/irq.c b/arch/mips/loongson64/lemote-2f/irq.c new file mode 100644 index 000000000..b213cecb8 --- /dev/null +++ b/arch/mips/loongson64/lemote-2f/irq.c @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2007 Lemote Inc. + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/export.h> +#include <linux/init.h> +#include <linux/interrupt.h> + +#include <asm/irq_cpu.h> +#include <asm/i8259.h> +#include <asm/mipsregs.h> + +#include <loongson.h> +#include <machine.h> + +#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */ +#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */ +#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */ +#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */ + +#define LOONGSON_INT_BIT_INT0 (1 << 11) +#define LOONGSON_INT_BIT_INT1 (1 << 12) + +/* + * The generic i8259_irq() make the kernel hang on booting. Since we cannot + * get the irq via the IRR directly, we access the ISR instead. + */ +int mach_i8259_irq(void) +{ + int irq, isr; + + irq = -1; + + if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) { + raw_spin_lock(&i8259A_lock); + isr = inb(PIC_MASTER_CMD) & + ~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR); + if (!isr) + isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8; + irq = ffs(isr) - 1; + if (unlikely(irq == 7)) { + /* + * This may be a spurious interrupt. + * + * Read the interrupt status register (ISR). If the most + * significant bit is not set then there is no valid + * interrupt. + */ + outb(0x0B, PIC_MASTER_ISR); /* ISR register */ + if (~inb(PIC_MASTER_ISR) & 0x80) + irq = -1; + } + raw_spin_unlock(&i8259A_lock); + } + + return irq; +} +EXPORT_SYMBOL(mach_i8259_irq); + +static void i8259_irqdispatch(void) +{ + int irq; + + irq = mach_i8259_irq(); + if (irq >= 0) + do_IRQ(irq); + else + spurious_interrupt(); +} + +void mach_irq_dispatch(unsigned int pending) +{ + if (pending & CAUSEF_IP7) + do_IRQ(LOONGSON_TIMER_IRQ); + else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */ + do_perfcnt_IRQ(); + bonito_irqdispatch(); + } else if (pending & CAUSEF_IP3) /* CPU UART */ + do_IRQ(LOONGSON_UART_IRQ); + else if (pending & CAUSEF_IP2) /* South Bridge */ + i8259_irqdispatch(); + else + spurious_interrupt(); +} + +static irqreturn_t ip6_action(int cpl, void *dev_id) +{ + return IRQ_HANDLED; +} + +static struct irqaction ip6_irqaction = { + .handler = ip6_action, + .name = "cascade", + .flags = IRQF_SHARED | IRQF_NO_THREAD, +}; + +static struct irqaction cascade_irqaction = { + .handler = no_action, + .name = "cascade", + .flags = IRQF_NO_THREAD | IRQF_NO_SUSPEND, +}; + +void __init mach_init_irq(void) +{ + /* init all controller + * 0-15 ------> i8259 interrupt + * 16-23 ------> mips cpu interrupt + * 32-63 ------> bonito irq + */ + + /* setup cs5536 as high level trigger */ + LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1; + LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1); + + /* Sets the first-level interrupt dispatcher. */ + mips_cpu_irq_init(); + init_i8259_irqs(); + bonito_irq_init(); + + /* setup north bridge irq (bonito) */ + setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction); + /* setup source bridge irq (i8259) */ + setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction); +} diff --git a/arch/mips/loongson64/lemote-2f/machtype.c b/arch/mips/loongson64/lemote-2f/machtype.c new file mode 100644 index 000000000..b55e6eece --- /dev/null +++ b/arch/mips/loongson64/lemote-2f/machtype.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <asm/bootinfo.h> + +#include <loongson.h> + +void __init mach_prom_init_machtype(void) +{ + /* We share the same kernel image file among Lemote 2F family + * of machines, and provide the machtype= kernel command line + * to users to indicate their machine, this command line will + * be passed by the latest PMON automatically. and fortunately, + * up to now, we can get the machine type from the PMON_VER= + * commandline directly except the NAS machine, In the old + * machines, this will help the users a lot. + * + * If no "machtype=" passed, get machine type from "PMON_VER=". + * PMON_VER=LM8089 Lemote 8.9'' netbook + * LM8101 Lemote 10.1'' netbook + * (The above two netbooks have the same kernel support) + * LM6XXX Lemote FuLoong(2F) box series + * LM9XXX Lemote LynLoong PC series + */ + if (strstr(arcs_cmdline, "PMON_VER=LM")) { + if (strstr(arcs_cmdline, "PMON_VER=LM8")) + mips_machtype = MACH_LEMOTE_YL2F89; + else if (strstr(arcs_cmdline, "PMON_VER=LM6")) + mips_machtype = MACH_LEMOTE_FL2F; + else if (strstr(arcs_cmdline, "PMON_VER=LM9")) + mips_machtype = MACH_LEMOTE_LL2F; + else + mips_machtype = MACH_LEMOTE_NAS; + + strcat(arcs_cmdline, " machtype="); + strcat(arcs_cmdline, get_system_type()); + strcat(arcs_cmdline, " "); + } +} diff --git a/arch/mips/loongson64/lemote-2f/pm.c b/arch/mips/loongson64/lemote-2f/pm.c new file mode 100644 index 000000000..6859e9348 --- /dev/null +++ b/arch/mips/loongson64/lemote-2f/pm.c @@ -0,0 +1,149 @@ +/* + * Lemote loongson2f family machines' specific suspend support + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin <wuzhangjin@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/suspend.h> +#include <linux/interrupt.h> +#include <linux/pm.h> +#include <linux/i8042.h> +#include <linux/export.h> + +#include <asm/i8259.h> +#include <asm/mipsregs.h> +#include <asm/bootinfo.h> + +#include <loongson.h> + +#include <cs5536/cs5536_mfgpt.h> +#include "ec_kb3310b.h" + +#define I8042_KBD_IRQ 1 +#define I8042_CTR_KBDINT 0x01 +#define I8042_CTR_KBDDIS 0x10 + +static unsigned char i8042_ctr; + +static int i8042_enable_kbd_port(void) +{ + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) { + pr_err("i8042.c: Can't read CTR while enabling i8042 kbd port." + "\n"); + return -EIO; + } + + i8042_ctr &= ~I8042_CTR_KBDDIS; + i8042_ctr |= I8042_CTR_KBDINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + i8042_ctr &= ~I8042_CTR_KBDINT; + i8042_ctr |= I8042_CTR_KBDDIS; + pr_err("i8042.c: Failed to enable KBD port.\n"); + + return -EIO; + } + + return 0; +} + +void setup_wakeup_events(void) +{ + int irq_mask; + + switch (mips_machtype) { + case MACH_LEMOTE_ML2F7: + case MACH_LEMOTE_YL2F89: + /* open the keyboard irq in i8259A */ + outb((0xff & ~(1 << I8042_KBD_IRQ)), PIC_MASTER_IMR); + irq_mask = inb(PIC_MASTER_IMR); + + /* enable keyboard port */ + i8042_enable_kbd_port(); + + /* Wakeup CPU via SCI lid open event */ + outb(irq_mask & ~(1 << PIC_CASCADE_IR), PIC_MASTER_IMR); + inb(PIC_MASTER_IMR); + outb(0xff & ~(1 << (SCI_IRQ_NUM - 8)), PIC_SLAVE_IMR); + inb(PIC_SLAVE_IMR); + + break; + + default: + break; + } +} + +static struct delayed_work lid_task; +static int initialized; +/* yeeloong_report_lid_status will be implemented in yeeloong_laptop.c */ +sci_handler yeeloong_report_lid_status; +EXPORT_SYMBOL(yeeloong_report_lid_status); +static void yeeloong_lid_update_task(struct work_struct *work) +{ + if (yeeloong_report_lid_status) + yeeloong_report_lid_status(BIT_LID_DETECT_ON); +} + +int wakeup_loongson(void) +{ + int irq; + + /* query the interrupt number */ + irq = mach_i8259_irq(); + if (irq < 0) + return 0; + + printk(KERN_INFO "%s: irq = %d\n", __func__, irq); + + if (irq == I8042_KBD_IRQ) + return 1; + else if (irq == SCI_IRQ_NUM) { + int ret, sci_event; + /* query the event number */ + ret = ec_query_seq(CMD_GET_EVENT_NUM); + if (ret < 0) + return 0; + sci_event = ec_get_event_num(); + if (sci_event < 0) + return 0; + if (sci_event == EVENT_LID) { + int lid_status; + /* check the LID status */ + lid_status = ec_read(REG_LID_DETECT); + /* wakeup cpu when people open the LID */ + if (lid_status == BIT_LID_DETECT_ON) { + /* If we call it directly here, the WARNING + * will be sent out by getnstimeofday + * via "WARN_ON(timekeeping_suspended);" + * because we can not schedule in suspend mode. + */ + if (initialized == 0) { + INIT_DELAYED_WORK(&lid_task, + yeeloong_lid_update_task); + initialized = 1; + } + schedule_delayed_work(&lid_task, 1); + return 1; + } + } + } + + return 0; +} + +void __weak mach_suspend(void) +{ + disable_mfgpt0_counter(); +} + +void __weak mach_resume(void) +{ + enable_mfgpt0_counter(); +} diff --git a/arch/mips/loongson64/lemote-2f/reset.c b/arch/mips/loongson64/lemote-2f/reset.c new file mode 100644 index 000000000..a26ca7fcd --- /dev/null +++ b/arch/mips/loongson64/lemote-2f/reset.c @@ -0,0 +1,159 @@ +/* Board-specific reboot/shutdown routines + * + * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/types.h> + +#include <asm/bootinfo.h> + +#include <loongson.h> + +#include <cs5536/cs5536.h> +#include "ec_kb3310b.h" + +static void reset_cpu(void) +{ + /* + * reset cpu to full speed, this is needed when enabling cpu frequency + * scalling + */ + LOONGSON_CHIPCFG(0) |= 0x7; +} + +/* reset support for fuloong2f */ + +static void fl2f_reboot(void) +{ + reset_cpu(); + + /* send a reset signal to south bridge. + * + * NOTE: if enable "Power Management" in kernel, rtl8169 will not reset + * normally with this reset operation and it will not work in PMON, but + * you can type halt command and then reboot, seems the hardware reset + * logic not work normally. + */ + { + u32 hi, lo; + _rdmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), &hi, &lo); + lo |= 0x00000001; + _wrmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), hi, lo); + } +} + +static void fl2f_shutdown(void) +{ + u32 hi, lo, val; + int gpio_base; + + /* get gpio base */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo); + gpio_base = lo & 0xff00; + + /* make cs5536 gpio13 output enable */ + val = inl(gpio_base + GPIOL_OUT_EN); + val &= ~(1 << (16 + 13)); + val |= (1 << 13); + outl(val, gpio_base + GPIOL_OUT_EN); + mmiowb(); + /* make cs5536 gpio13 output low level voltage. */ + val = inl(gpio_base + GPIOL_OUT_VAL) & ~(1 << (13)); + val |= (1 << (16 + 13)); + outl(val, gpio_base + GPIOL_OUT_VAL); + mmiowb(); +} + +/* reset support for yeeloong2f and mengloong2f notebook */ + +static void ml2f_reboot(void) +{ + reset_cpu(); + + /* sending an reset signal to EC(embedded controller) */ + ec_write(REG_RESET, BIT_RESET_ON); +} + +#define yl2f89_reboot ml2f_reboot + +/* menglong(7inches) laptop has different shutdown logic from 8.9inches */ +#define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d +#define EC_SHUTDOWN_IO_PORT_LOW 0xff2e +#define EC_SHUTDOWN_IO_PORT_DATA 0xff2f +#define REG_SHUTDOWN_HIGH 0xFC +#define REG_SHUTDOWN_LOW 0x29 +#define BIT_SHUTDOWN_ON (1 << 1) + +static void ml2f_shutdown(void) +{ + u8 val; + u64 i; + + outb(REG_SHUTDOWN_HIGH, EC_SHUTDOWN_IO_PORT_HIGH); + outb(REG_SHUTDOWN_LOW, EC_SHUTDOWN_IO_PORT_LOW); + mmiowb(); + val = inb(EC_SHUTDOWN_IO_PORT_DATA); + outb(val & (~BIT_SHUTDOWN_ON), EC_SHUTDOWN_IO_PORT_DATA); + mmiowb(); + /* need enough wait here... how many microseconds needs? */ + for (i = 0; i < 0x10000; i++) + delay(); + outb(val | BIT_SHUTDOWN_ON, EC_SHUTDOWN_IO_PORT_DATA); + mmiowb(); +} + +static void yl2f89_shutdown(void) +{ + /* cpu-gpio0 output low */ + LOONGSON_GPIODATA &= ~0x00000001; + /* cpu-gpio0 as output */ + LOONGSON_GPIOIE &= ~0x00000001; +} + +void mach_prepare_reboot(void) +{ + switch (mips_machtype) { + case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_NAS: + case MACH_LEMOTE_LL2F: + fl2f_reboot(); + break; + case MACH_LEMOTE_ML2F7: + ml2f_reboot(); + break; + case MACH_LEMOTE_YL2F89: + yl2f89_reboot(); + break; + default: + break; + } +} + +void mach_prepare_shutdown(void) +{ + switch (mips_machtype) { + case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_NAS: + case MACH_LEMOTE_LL2F: + fl2f_shutdown(); + break; + case MACH_LEMOTE_ML2F7: + ml2f_shutdown(); + break; + case MACH_LEMOTE_YL2F89: + yl2f89_shutdown(); + break; + default: + break; + } +} diff --git a/arch/mips/loongson64/loongson-3/Makefile b/arch/mips/loongson64/loongson-3/Makefile new file mode 100644 index 000000000..b5a0c2fa5 --- /dev/null +++ b/arch/mips/loongson64/loongson-3/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for Loongson-3 family machines +# +obj-y += irq.o cop2-ex.o platform.o acpi_init.o dma.o + +obj-$(CONFIG_SMP) += smp.o + +obj-$(CONFIG_NUMA) += numa.o + +obj-$(CONFIG_RS780_HPET) += hpet.o diff --git a/arch/mips/loongson64/loongson-3/acpi_init.c b/arch/mips/loongson64/loongson-3/acpi_init.c new file mode 100644 index 000000000..8d7c119dd --- /dev/null +++ b/arch/mips/loongson64/loongson-3/acpi_init.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/io.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/export.h> + +#define SBX00_ACPI_IO_BASE 0x800 +#define SBX00_ACPI_IO_SIZE 0x100 + +#define ACPI_PM_EVT_BLK (SBX00_ACPI_IO_BASE + 0x00) /* 4 bytes */ +#define ACPI_PM_CNT_BLK (SBX00_ACPI_IO_BASE + 0x04) /* 2 bytes */ +#define ACPI_PMA_CNT_BLK (SBX00_ACPI_IO_BASE + 0x0F) /* 1 byte */ +#define ACPI_PM_TMR_BLK (SBX00_ACPI_IO_BASE + 0x18) /* 4 bytes */ +#define ACPI_GPE0_BLK (SBX00_ACPI_IO_BASE + 0x10) /* 8 bytes */ +#define ACPI_END (SBX00_ACPI_IO_BASE + 0x80) + +#define PM_INDEX 0xCD6 +#define PM_DATA 0xCD7 +#define PM2_INDEX 0xCD0 +#define PM2_DATA 0xCD1 + +/* + * SCI interrupt need acpi space, allocate here + */ + +static int __init register_acpi_resource(void) +{ + request_region(SBX00_ACPI_IO_BASE, SBX00_ACPI_IO_SIZE, "acpi"); + return 0; +} + +static void pmio_write_index(u16 index, u8 reg, u8 value) +{ + outb(reg, index); + outb(value, index + 1); +} + +static u8 pmio_read_index(u16 index, u8 reg) +{ + outb(reg, index); + return inb(index + 1); +} + +void pm_iowrite(u8 reg, u8 value) +{ + pmio_write_index(PM_INDEX, reg, value); +} +EXPORT_SYMBOL(pm_iowrite); + +u8 pm_ioread(u8 reg) +{ + return pmio_read_index(PM_INDEX, reg); +} +EXPORT_SYMBOL(pm_ioread); + +void pm2_iowrite(u8 reg, u8 value) +{ + pmio_write_index(PM2_INDEX, reg, value); +} +EXPORT_SYMBOL(pm2_iowrite); + +u8 pm2_ioread(u8 reg) +{ + return pmio_read_index(PM2_INDEX, reg); +} +EXPORT_SYMBOL(pm2_ioread); + +static void acpi_hw_clear_status(void) +{ + u16 value; + + /* PMStatus: Clear WakeStatus/PwrBtnStatus */ + value = inw(ACPI_PM_EVT_BLK); + value |= (1 << 8 | 1 << 15); + outw(value, ACPI_PM_EVT_BLK); + + /* GPEStatus: Clear all generated events */ + outl(inl(ACPI_GPE0_BLK), ACPI_GPE0_BLK); +} + +void acpi_registers_setup(void) +{ + u32 value; + + /* PM Status Base */ + pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xff); + pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); + + /* PM Control Base */ + pm_iowrite(0x22, ACPI_PM_CNT_BLK & 0xff); + pm_iowrite(0x23, ACPI_PM_CNT_BLK >> 8); + + /* GPM Base */ + pm_iowrite(0x28, ACPI_GPE0_BLK & 0xff); + pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); + + /* ACPI End */ + pm_iowrite(0x2e, ACPI_END & 0xff); + pm_iowrite(0x2f, ACPI_END >> 8); + + /* IO Decode: When AcpiDecodeEnable set, South-Bridge uses the contents + * of the PM registers at index 0x20~0x2B to decode ACPI I/O address. */ + pm_iowrite(0x0e, 1 << 3); + + /* SCI_EN set */ + outw(1, ACPI_PM_CNT_BLK); + + /* Enable to generate SCI */ + pm_iowrite(0x10, pm_ioread(0x10) | 1); + + /* GPM3/GPM9 enable */ + value = inl(ACPI_GPE0_BLK + 4); + outl(value | (1 << 14) | (1 << 22), ACPI_GPE0_BLK + 4); + + /* Set GPM9 as input */ + pm_iowrite(0x8d, pm_ioread(0x8d) & (~(1 << 1))); + + /* Set GPM9 as non-output */ + pm_iowrite(0x94, pm_ioread(0x94) | (1 << 3)); + + /* GPM3 config ACPI trigger SCIOUT */ + pm_iowrite(0x33, pm_ioread(0x33) & (~(3 << 4))); + + /* GPM9 config ACPI trigger SCIOUT */ + pm_iowrite(0x3d, pm_ioread(0x3d) & (~(3 << 2))); + + /* GPM3 config falling edge trigger */ + pm_iowrite(0x37, pm_ioread(0x37) & (~(1 << 6))); + + /* No wait for STPGNT# in ACPI Sx state */ + pm_iowrite(0x7c, pm_ioread(0x7c) | (1 << 6)); + + /* Set GPM3 pull-down enable */ + value = pm2_ioread(0xf6); + value |= ((1 << 7) | (1 << 3)); + pm2_iowrite(0xf6, value); + + /* Set GPM9 pull-down enable */ + value = pm2_ioread(0xf8); + value |= ((1 << 5) | (1 << 1)); + pm2_iowrite(0xf8, value); +} + +int __init sbx00_acpi_init(void) +{ + register_acpi_resource(); + acpi_registers_setup(); + acpi_hw_clear_status(); + + return 0; +} diff --git a/arch/mips/loongson64/loongson-3/cop2-ex.c b/arch/mips/loongson64/loongson-3/cop2-ex.c new file mode 100644 index 000000000..621d6af5f --- /dev/null +++ b/arch/mips/loongson64/loongson-3/cop2-ex.c @@ -0,0 +1,64 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2014 Lemote Corporation. + * written by Huacai Chen <chenhc@lemote.com> + * + * based on arch/mips/cavium-octeon/cpu.c + * Copyright (C) 2009 Wind River Systems, + * written by Ralf Baechle <ralf@linux-mips.org> + */ +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/notifier.h> +#include <linux/ptrace.h> + +#include <asm/fpu.h> +#include <asm/cop2.h> +#include <asm/current.h> +#include <asm/mipsregs.h> + +static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action, + void *data) +{ + int fpu_owned; + int fr = !test_thread_flag(TIF_32BIT_FPREGS); + + switch (action) { + case CU2_EXCEPTION: + preempt_disable(); + fpu_owned = __is_fpu_owner(); + if (!fr) + set_c0_status(ST0_CU1 | ST0_CU2); + else + set_c0_status(ST0_CU1 | ST0_CU2 | ST0_FR); + enable_fpu_hazard(); + KSTK_STATUS(current) |= (ST0_CU1 | ST0_CU2); + if (fr) + KSTK_STATUS(current) |= ST0_FR; + else + KSTK_STATUS(current) &= ~ST0_FR; + /* If FPU is owned, we needn't init or restore fp */ + if (!fpu_owned) { + set_thread_flag(TIF_USEDFPU); + if (!used_math()) { + _init_fpu(current->thread.fpu.fcr31); + set_used_math(); + } else + _restore_fp(current); + } + preempt_enable(); + + return NOTIFY_STOP; /* Don't call default notifier */ + } + + return NOTIFY_OK; /* Let default notifier send signals */ +} + +static int __init loongson_cu2_setup(void) +{ + return cu2_notifier(loongson_cu2_call, 0); +} +early_initcall(loongson_cu2_setup); diff --git a/arch/mips/loongson64/loongson-3/dma.c b/arch/mips/loongson64/loongson-3/dma.c new file mode 100644 index 000000000..5e86635f7 --- /dev/null +++ b/arch/mips/loongson64/loongson-3/dma.c @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/dma-direct.h> +#include <linux/init.h> +#include <linux/swiotlb.h> + +dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from + * Loongson-3's 48bit address space and embed it into 40bit */ + long nid = (paddr >> 44) & 0x3; + return ((nid << 44) ^ paddr) | (nid << 37); +} + +phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr) +{ + /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from + * Loongson-3's 48bit address space and embed it into 40bit */ + long nid = (daddr >> 37) & 0x3; + return ((nid << 37) ^ daddr) | (nid << 44); +} + +void __init plat_swiotlb_setup(void) +{ + swiotlb_init(1); +} diff --git a/arch/mips/loongson64/loongson-3/hpet.c b/arch/mips/loongson64/loongson-3/hpet.c new file mode 100644 index 000000000..ed15430ad --- /dev/null +++ b/arch/mips/loongson64/loongson-3/hpet.c @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/percpu.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> + +#include <asm/hpet.h> +#include <asm/time.h> + +#define SMBUS_CFG_BASE (loongson_sysconf.ht_control_base + 0x0300a000) +#define SMBUS_PCI_REG40 0x40 +#define SMBUS_PCI_REG64 0x64 +#define SMBUS_PCI_REGB4 0xb4 + +#define HPET_MIN_CYCLES 16 +#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES * 12) + +static DEFINE_SPINLOCK(hpet_lock); +DEFINE_PER_CPU(struct clock_event_device, hpet_clockevent_device); + +static unsigned int smbus_read(int offset) +{ + return *(volatile unsigned int *)(SMBUS_CFG_BASE + offset); +} + +static void smbus_write(int offset, int data) +{ + *(volatile unsigned int *)(SMBUS_CFG_BASE + offset) = data; +} + +static void smbus_enable(int offset, int bit) +{ + unsigned int cfg = smbus_read(offset); + + cfg |= bit; + smbus_write(offset, cfg); +} + +static int hpet_read(int offset) +{ + return *(volatile unsigned int *)(HPET_MMIO_ADDR + offset); +} + +static void hpet_write(int offset, int data) +{ + *(volatile unsigned int *)(HPET_MMIO_ADDR + offset) = data; +} + +static void hpet_start_counter(void) +{ + unsigned int cfg = hpet_read(HPET_CFG); + + cfg |= HPET_CFG_ENABLE; + hpet_write(HPET_CFG, cfg); +} + +static void hpet_stop_counter(void) +{ + unsigned int cfg = hpet_read(HPET_CFG); + + cfg &= ~HPET_CFG_ENABLE; + hpet_write(HPET_CFG, cfg); +} + +static void hpet_reset_counter(void) +{ + hpet_write(HPET_COUNTER, 0); + hpet_write(HPET_COUNTER + 4, 0); +} + +static void hpet_restart_counter(void) +{ + hpet_stop_counter(); + hpet_reset_counter(); + hpet_start_counter(); +} + +static void hpet_enable_legacy_int(void) +{ + /* Do nothing on Loongson-3 */ +} + +static int hpet_set_state_periodic(struct clock_event_device *evt) +{ + int cfg; + + spin_lock(&hpet_lock); + + pr_info("set clock event to periodic mode!\n"); + /* stop counter */ + hpet_stop_counter(); + + /* enables the timer0 to generate a periodic interrupt */ + cfg = hpet_read(HPET_T0_CFG); + cfg &= ~HPET_TN_LEVEL; + cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | + HPET_TN_32BIT; + hpet_write(HPET_T0_CFG, cfg); + + /* set the comparator */ + hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL); + udelay(1); + hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL); + + /* start counter */ + hpet_start_counter(); + + spin_unlock(&hpet_lock); + return 0; +} + +static int hpet_set_state_shutdown(struct clock_event_device *evt) +{ + int cfg; + + spin_lock(&hpet_lock); + + cfg = hpet_read(HPET_T0_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_write(HPET_T0_CFG, cfg); + + spin_unlock(&hpet_lock); + return 0; +} + +static int hpet_set_state_oneshot(struct clock_event_device *evt) +{ + int cfg; + + spin_lock(&hpet_lock); + + pr_info("set clock event to one shot mode!\n"); + cfg = hpet_read(HPET_T0_CFG); + /* + * set timer0 type + * 1 : periodic interrupt + * 0 : non-periodic(oneshot) interrupt + */ + cfg &= ~HPET_TN_PERIODIC; + cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; + hpet_write(HPET_T0_CFG, cfg); + + spin_unlock(&hpet_lock); + return 0; +} + +static int hpet_tick_resume(struct clock_event_device *evt) +{ + spin_lock(&hpet_lock); + hpet_enable_legacy_int(); + spin_unlock(&hpet_lock); + + return 0; +} + +static int hpet_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + u32 cnt; + s32 res; + + cnt = hpet_read(HPET_COUNTER); + cnt += (u32) delta; + hpet_write(HPET_T0_CMP, cnt); + + res = (s32)(cnt - hpet_read(HPET_COUNTER)); + + return res < HPET_MIN_CYCLES ? -ETIME : 0; +} + +static irqreturn_t hpet_irq_handler(int irq, void *data) +{ + int is_irq; + struct clock_event_device *cd; + unsigned int cpu = smp_processor_id(); + + is_irq = hpet_read(HPET_STATUS); + if (is_irq & HPET_T0_IRS) { + /* clear the TIMER0 irq status register */ + hpet_write(HPET_STATUS, HPET_T0_IRS); + cd = &per_cpu(hpet_clockevent_device, cpu); + cd->event_handler(cd); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static struct irqaction hpet_irq = { + .handler = hpet_irq_handler, + .flags = IRQF_NOBALANCING | IRQF_TIMER, + .name = "hpet", +}; + +/* + * hpet address assignation and irq setting should be done in bios. + * but pmon don't do this, we just setup here directly. + * The operation under is normal. unfortunately, hpet_setup process + * is before pci initialize. + * + * { + * struct pci_dev *pdev; + * + * pdev = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL); + * pci_write_config_word(pdev, SMBUS_PCI_REGB4, HPET_ADDR); + * + * ... + * } + */ +static void hpet_setup(void) +{ + /* set hpet base address */ + smbus_write(SMBUS_PCI_REGB4, HPET_ADDR); + + /* enable decoding of access to HPET MMIO*/ + smbus_enable(SMBUS_PCI_REG40, (1 << 28)); + + /* HPET irq enable */ + smbus_enable(SMBUS_PCI_REG64, (1 << 10)); + + hpet_enable_legacy_int(); +} + +void __init setup_hpet_timer(void) +{ + unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd; + + hpet_setup(); + + cd = &per_cpu(hpet_clockevent_device, cpu); + cd->name = "hpet"; + cd->rating = 100; + cd->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + cd->set_state_shutdown = hpet_set_state_shutdown; + cd->set_state_periodic = hpet_set_state_periodic; + cd->set_state_oneshot = hpet_set_state_oneshot; + cd->tick_resume = hpet_tick_resume; + cd->set_next_event = hpet_next_event; + cd->irq = HPET_T0_IRQ; + cd->cpumask = cpumask_of(cpu); + clockevent_set_clock(cd, HPET_FREQ); + cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); + cd->max_delta_ticks = 0x7fffffff; + cd->min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA, cd); + cd->min_delta_ticks = HPET_MIN_PROG_DELTA; + + clockevents_register_device(cd); + setup_irq(HPET_T0_IRQ, &hpet_irq); + pr_info("hpet clock event device register\n"); +} + +static u64 hpet_read_counter(struct clocksource *cs) +{ + return (u64)hpet_read(HPET_COUNTER); +} + +static void hpet_suspend(struct clocksource *cs) +{ +} + +static void hpet_resume(struct clocksource *cs) +{ + hpet_setup(); + hpet_restart_counter(); +} + +static struct clocksource csrc_hpet = { + .name = "hpet", + /* mips clocksource rating is less than 300, so hpet is better. */ + .rating = 300, + .read = hpet_read_counter, + .mask = CLOCKSOURCE_MASK(32), + /* oneshot mode work normal with this flag */ + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .suspend = hpet_suspend, + .resume = hpet_resume, + .mult = 0, + .shift = 10, +}; + +int __init init_hpet_clocksource(void) +{ + csrc_hpet.mult = clocksource_hz2mult(HPET_FREQ, csrc_hpet.shift); + return clocksource_register_hz(&csrc_hpet, HPET_FREQ); +} + +arch_initcall(init_hpet_clocksource); diff --git a/arch/mips/loongson64/loongson-3/irq.c b/arch/mips/loongson64/loongson-3/irq.c new file mode 100644 index 000000000..5605061f5 --- /dev/null +++ b/arch/mips/loongson64/loongson-3/irq.c @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <loongson.h> +#include <irq.h> +#include <linux/interrupt.h> +#include <linux/init.h> + +#include <asm/irq_cpu.h> +#include <asm/i8259.h> +#include <asm/mipsregs.h> + +#include "smp.h" + +extern void loongson3_send_irq_by_ipi(int cpu, int irqs); + +unsigned int irq_cpu[16] = {[0 ... 15] = -1}; +unsigned int ht_irq[] = {0, 1, 3, 4, 5, 6, 7, 8, 12, 14, 15}; +unsigned int local_irq = 1<<0 | 1<<1 | 1<<2 | 1<<7 | 1<<8 | 1<<12; + +int plat_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity, + bool force) +{ + unsigned int cpu; + struct cpumask new_affinity; + + /* I/O devices are connected on package-0 */ + cpumask_copy(&new_affinity, affinity); + for_each_cpu(cpu, affinity) + if (cpu_data[cpu].package > 0) + cpumask_clear_cpu(cpu, &new_affinity); + + if (cpumask_empty(&new_affinity)) + return -EINVAL; + + cpumask_copy(d->common->affinity, &new_affinity); + + return IRQ_SET_MASK_OK_NOCOPY; +} + +static void ht_irqdispatch(void) +{ + unsigned int i, irq; + struct irq_data *irqd; + struct cpumask affinity; + + irq = LOONGSON_HT1_INT_VECTOR(0); + LOONGSON_HT1_INT_VECTOR(0) = irq; /* Acknowledge the IRQs */ + + for (i = 0; i < ARRAY_SIZE(ht_irq); i++) { + if (!(irq & (0x1 << ht_irq[i]))) + continue; + + /* handled by local core */ + if (local_irq & (0x1 << ht_irq[i])) { + do_IRQ(ht_irq[i]); + continue; + } + + irqd = irq_get_irq_data(ht_irq[i]); + cpumask_and(&affinity, irqd->common->affinity, cpu_active_mask); + if (cpumask_empty(&affinity)) { + do_IRQ(ht_irq[i]); + continue; + } + + irq_cpu[ht_irq[i]] = cpumask_next(irq_cpu[ht_irq[i]], &affinity); + if (irq_cpu[ht_irq[i]] >= nr_cpu_ids) + irq_cpu[ht_irq[i]] = cpumask_first(&affinity); + + if (irq_cpu[ht_irq[i]] == 0) { + do_IRQ(ht_irq[i]); + continue; + } + + /* balanced by other cores */ + loongson3_send_irq_by_ipi(irq_cpu[ht_irq[i]], (0x1 << ht_irq[i])); + } +} + +#define UNUSED_IPS (CAUSEF_IP5 | CAUSEF_IP4 | CAUSEF_IP1 | CAUSEF_IP0) + +void mach_irq_dispatch(unsigned int pending) +{ + if (pending & CAUSEF_IP7) + do_IRQ(LOONGSON_TIMER_IRQ); +#if defined(CONFIG_SMP) + if (pending & CAUSEF_IP6) + loongson3_ipi_interrupt(NULL); +#endif + if (pending & CAUSEF_IP3) + ht_irqdispatch(); + if (pending & CAUSEF_IP2) + do_IRQ(LOONGSON_UART_IRQ); + if (pending & UNUSED_IPS) { + pr_err("%s : spurious interrupt\n", __func__); + spurious_interrupt(); + } +} + +static inline void mask_loongson_irq(struct irq_data *d) { } +static inline void unmask_loongson_irq(struct irq_data *d) { } + + /* For MIPS IRQs which shared by all cores */ +static struct irq_chip loongson_irq_chip = { + .name = "Loongson", + .irq_ack = mask_loongson_irq, + .irq_mask = mask_loongson_irq, + .irq_mask_ack = mask_loongson_irq, + .irq_unmask = unmask_loongson_irq, + .irq_eoi = unmask_loongson_irq, +}; + +void irq_router_init(void) +{ + int i; + + /* route LPC int to cpu core0 int 0 */ + LOONGSON_INT_ROUTER_LPC = + LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 0); + /* route HT1 int0 ~ int7 to cpu core0 INT1*/ + for (i = 0; i < 8; i++) + LOONGSON_INT_ROUTER_HT1(i) = + LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 1); + /* enable HT1 interrupt */ + LOONGSON_HT1_INTN_EN(0) = 0xffffffff; + /* enable router interrupt intenset */ + LOONGSON_INT_ROUTER_INTENSET = + LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10; +} + +void __init mach_init_irq(void) +{ + struct irq_chip *chip; + + clear_c0_status(ST0_IM | ST0_BEV); + + irq_router_init(); + mips_cpu_irq_init(); + init_i8259_irqs(); + chip = irq_get_chip(I8259A_IRQ_BASE); + chip->irq_set_affinity = plat_set_irq_affinity; + + irq_set_chip_and_handler(LOONGSON_UART_IRQ, + &loongson_irq_chip, handle_percpu_irq); + irq_set_chip_and_handler(LOONGSON_BRIDGE_IRQ, + &loongson_irq_chip, handle_percpu_irq); + + set_c0_status(STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP6); +} + +#ifdef CONFIG_HOTPLUG_CPU + +void fixup_irqs(void) +{ + irq_cpu_offline(); + clear_c0_status(ST0_IM); +} + +#endif diff --git a/arch/mips/loongson64/loongson-3/numa.c b/arch/mips/loongson64/loongson-3/numa.c new file mode 100644 index 000000000..9717106de --- /dev/null +++ b/arch/mips/loongson64/loongson-3/numa.c @@ -0,0 +1,296 @@ +/* + * Copyright (C) 2010 Loongson Inc. & Lemote Inc. & + * Institute of Computing Technology + * Author: Xiang Gao, gaoxiang@ict.ac.cn + * Huacai Chen, chenhc@lemote.com + * Xiaofu Meng, Shuangshuang Zhang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/mmzone.h> +#include <linux/export.h> +#include <linux/nodemask.h> +#include <linux/swap.h> +#include <linux/memblock.h> +#include <linux/bootmem.h> +#include <linux/pfn.h> +#include <linux/highmem.h> +#include <asm/page.h> +#include <asm/pgalloc.h> +#include <asm/sections.h> +#include <linux/irq.h> +#include <asm/bootinfo.h> +#include <asm/mc146818-time.h> +#include <asm/time.h> +#include <asm/wbflush.h> +#include <boot_param.h> + +static struct node_data prealloc__node_data[MAX_NUMNODES]; +unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES]; +EXPORT_SYMBOL(__node_distances); +struct node_data *__node_data[MAX_NUMNODES]; +EXPORT_SYMBOL(__node_data); + +static void enable_lpa(void) +{ + unsigned long value; + + value = __read_32bit_c0_register($16, 3); + value |= 0x00000080; + __write_32bit_c0_register($16, 3, value); + value = __read_32bit_c0_register($16, 3); + pr_info("CP0_Config3: CP0 16.3 (0x%lx)\n", value); + + value = __read_32bit_c0_register($5, 1); + value |= 0x20000000; + __write_32bit_c0_register($5, 1, value); + value = __read_32bit_c0_register($5, 1); + pr_info("CP0_PageGrain: CP0 5.1 (0x%lx)\n", value); +} + +static void cpu_node_probe(void) +{ + int i; + + nodes_clear(node_possible_map); + nodes_clear(node_online_map); + for (i = 0; i < loongson_sysconf.nr_nodes; i++) { + node_set_state(num_online_nodes(), N_POSSIBLE); + node_set_online(num_online_nodes()); + } + + pr_info("NUMA: Discovered %d cpus on %d nodes\n", + loongson_sysconf.nr_cpus, num_online_nodes()); +} + +static int __init compute_node_distance(int row, int col) +{ + int package_row = row * loongson_sysconf.cores_per_node / + loongson_sysconf.cores_per_package; + int package_col = col * loongson_sysconf.cores_per_node / + loongson_sysconf.cores_per_package; + + if (col == row) + return 0; + else if (package_row == package_col) + return 40; + else + return 100; +} + +static void __init init_topology_matrix(void) +{ + int row, col; + + for (row = 0; row < MAX_NUMNODES; row++) + for (col = 0; col < MAX_NUMNODES; col++) + __node_distances[row][col] = -1; + + for_each_online_node(row) { + for_each_online_node(col) { + __node_distances[row][col] = + compute_node_distance(row, col); + } + } +} + +static unsigned long nid_to_addroffset(unsigned int nid) +{ + unsigned long result; + switch (nid) { + case 0: + default: + result = NODE0_ADDRSPACE_OFFSET; + break; + case 1: + result = NODE1_ADDRSPACE_OFFSET; + break; + case 2: + result = NODE2_ADDRSPACE_OFFSET; + break; + case 3: + result = NODE3_ADDRSPACE_OFFSET; + break; + } + return result; +} + +static void __init szmem(unsigned int node) +{ + u32 i, mem_type; + static unsigned long num_physpages = 0; + u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size; + + /* Parse memory information and activate */ + for (i = 0; i < loongson_memmap->nr_map; i++) { + node_id = loongson_memmap->map[i].node_id; + if (node_id != node) + continue; + + mem_type = loongson_memmap->map[i].mem_type; + mem_size = loongson_memmap->map[i].mem_size; + mem_start = loongson_memmap->map[i].mem_start; + + switch (mem_type) { + case SYSTEM_RAM_LOW: + start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT; + node_psize = (mem_size << 20) >> PAGE_SHIFT; + end_pfn = start_pfn + node_psize; + num_physpages += node_psize; + pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n", + (u32)node_id, mem_type, mem_start, mem_size); + pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n", + start_pfn, end_pfn, num_physpages); + add_memory_region((node_id << 44) + mem_start, + (u64)mem_size << 20, BOOT_MEM_RAM); + memblock_add_node(PFN_PHYS(start_pfn), + PFN_PHYS(end_pfn - start_pfn), node); + break; + case SYSTEM_RAM_HIGH: + start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT; + node_psize = (mem_size << 20) >> PAGE_SHIFT; + end_pfn = start_pfn + node_psize; + num_physpages += node_psize; + pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n", + (u32)node_id, mem_type, mem_start, mem_size); + pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n", + start_pfn, end_pfn, num_physpages); + add_memory_region((node_id << 44) + mem_start, + (u64)mem_size << 20, BOOT_MEM_RAM); + memblock_add_node(PFN_PHYS(start_pfn), + PFN_PHYS(end_pfn - start_pfn), node); + break; + case SYSTEM_RAM_RESERVED: + pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n", + (u32)node_id, mem_type, mem_start, mem_size); + add_memory_region((node_id << 44) + mem_start, + (u64)mem_size << 20, BOOT_MEM_RESERVED); + memblock_reserve(((node_id << 44) + mem_start), + mem_size << 20); + break; + } + } +} + +static void __init node_mem_init(unsigned int node) +{ + unsigned long bootmap_size; + unsigned long node_addrspace_offset; + unsigned long start_pfn, end_pfn, freepfn; + + node_addrspace_offset = nid_to_addroffset(node); + pr_info("Node%d's addrspace_offset is 0x%lx\n", + node, node_addrspace_offset); + + get_pfn_range_for_nid(node, &start_pfn, &end_pfn); + freepfn = start_pfn; + if (node == 0) + freepfn = PFN_UP(__pa_symbol(&_end)); /* kernel end address */ + pr_info("Node%d: start_pfn=0x%lx, end_pfn=0x%lx, freepfn=0x%lx\n", + node, start_pfn, end_pfn, freepfn); + + __node_data[node] = prealloc__node_data + node; + + NODE_DATA(node)->bdata = &bootmem_node_data[node]; + NODE_DATA(node)->node_start_pfn = start_pfn; + NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn; + + bootmap_size = init_bootmem_node(NODE_DATA(node), freepfn, + start_pfn, end_pfn); + free_bootmem_with_active_regions(node, end_pfn); + if (node == 0) /* used by finalize_initrd() */ + max_low_pfn = end_pfn; + + /* This is reserved for the kernel and bdata->node_bootmem_map */ + reserve_bootmem_node(NODE_DATA(node), start_pfn << PAGE_SHIFT, + ((freepfn - start_pfn) << PAGE_SHIFT) + bootmap_size, + BOOTMEM_DEFAULT); + + if (node == 0 && node_end_pfn(0) >= (0xffffffff >> PAGE_SHIFT)) { + /* Reserve 0xfe000000~0xffffffff for RS780E integrated GPU */ + reserve_bootmem_node(NODE_DATA(node), + (node_addrspace_offset | 0xfe000000), + 32 << 20, BOOTMEM_DEFAULT); + } + + sparse_memory_present_with_active_regions(node); +} + +static __init void prom_meminit(void) +{ + unsigned int node, cpu, active_cpu = 0; + + cpu_node_probe(); + init_topology_matrix(); + + for (node = 0; node < loongson_sysconf.nr_nodes; node++) { + if (node_online(node)) { + szmem(node); + node_mem_init(node); + cpumask_clear(&__node_data[(node)]->cpumask); + } + } + for (cpu = 0; cpu < loongson_sysconf.nr_cpus; cpu++) { + node = cpu / loongson_sysconf.cores_per_node; + if (node >= num_online_nodes()) + node = 0; + + if (loongson_sysconf.reserved_cpus_mask & (1<<cpu)) + continue; + + cpumask_set_cpu(active_cpu, &__node_data[(node)]->cpumask); + pr_info("NUMA: set cpumask cpu %d on node %d\n", active_cpu, node); + + active_cpu++; + } +} + +void __init paging_init(void) +{ + unsigned node; + unsigned long zones_size[MAX_NR_ZONES] = {0, }; + + pagetable_init(); + + for_each_online_node(node) { + unsigned long start_pfn, end_pfn; + + get_pfn_range_for_nid(node, &start_pfn, &end_pfn); + + if (end_pfn > max_low_pfn) + max_low_pfn = end_pfn; + } +#ifdef CONFIG_ZONE_DMA32 + zones_size[ZONE_DMA32] = MAX_DMA32_PFN; +#endif + zones_size[ZONE_NORMAL] = max_low_pfn; + free_area_init_nodes(zones_size); +} + +void __init mem_init(void) +{ + high_memory = (void *) __va(get_num_physpages() << PAGE_SHIFT); + free_all_bootmem(); + setup_zero_pages(); /* This comes from node 0 */ + mem_init_print_info(NULL); +} + +/* All PCI device belongs to logical Node-0 */ +int pcibus_to_node(struct pci_bus *bus) +{ + return 0; +} +EXPORT_SYMBOL(pcibus_to_node); + +void __init prom_init_numa_memory(void) +{ + enable_lpa(); + prom_meminit(); +} +EXPORT_SYMBOL(prom_init_numa_memory); diff --git a/arch/mips/loongson64/loongson-3/platform.c b/arch/mips/loongson64/loongson-3/platform.c new file mode 100644 index 000000000..0db4cc319 --- /dev/null +++ b/arch/mips/loongson64/loongson-3/platform.c @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * Xiang Yu, xiangy@lemote.com + * Chen Huacai, chenhc@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <asm/bootinfo.h> +#include <boot_param.h> +#include <loongson_hwmon.h> +#include <workarounds.h> + +static int __init loongson3_platform_init(void) +{ + int i; + struct platform_device *pdev; + + if (loongson_sysconf.ecname[0] != '\0') + platform_device_register_simple(loongson_sysconf.ecname, -1, NULL, 0); + + for (i = 0; i < loongson_sysconf.nr_sensors; i++) { + if (loongson_sysconf.sensors[i].type > SENSOR_FAN) + continue; + + pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL); + if (!pdev) + return -ENOMEM; + + pdev->name = loongson_sysconf.sensors[i].name; + pdev->id = loongson_sysconf.sensors[i].id; + pdev->dev.platform_data = &loongson_sysconf.sensors[i]; + platform_device_register(pdev); + } + + return 0; +} + +arch_initcall(loongson3_platform_init); diff --git a/arch/mips/loongson64/loongson-3/smp.c b/arch/mips/loongson64/loongson-3/smp.c new file mode 100644 index 000000000..fea95d003 --- /dev/null +++ b/arch/mips/loongson64/loongson-3/smp.c @@ -0,0 +1,752 @@ +/* + * Copyright (C) 2010, 2011, 2012, Lemote, Inc. + * Author: Chen Huacai, chenhc@lemote.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <linux/cpu.h> +#include <linux/sched.h> +#include <linux/sched/hotplug.h> +#include <linux/sched/task_stack.h> +#include <linux/smp.h> +#include <linux/cpufreq.h> +#include <asm/processor.h> +#include <asm/time.h> +#include <asm/clock.h> +#include <asm/tlbflush.h> +#include <asm/cacheflush.h> +#include <loongson.h> +#include <workarounds.h> + +#include "smp.h" + +DEFINE_PER_CPU(int, cpu_state); + +static void *ipi_set0_regs[16]; +static void *ipi_clear0_regs[16]; +static void *ipi_status0_regs[16]; +static void *ipi_en0_regs[16]; +static void *ipi_mailbox_buf[16]; +static uint32_t core0_c0count[NR_CPUS]; + +/* read a 32bit value from ipi register */ +#define loongson3_ipi_read32(addr) readl(addr) +/* read a 64bit value from ipi register */ +#define loongson3_ipi_read64(addr) readq(addr) +/* write a 32bit value to ipi register */ +#define loongson3_ipi_write32(action, addr) \ + do { \ + writel(action, addr); \ + __wbflush(); \ + } while (0) +/* write a 64bit value to ipi register */ +#define loongson3_ipi_write64(action, addr) \ + do { \ + writeq(action, addr); \ + __wbflush(); \ + } while (0) + +static void ipi_set0_regs_init(void) +{ + ipi_set0_regs[0] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + SET0); + ipi_set0_regs[1] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + SET0); + ipi_set0_regs[2] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + SET0); + ipi_set0_regs[3] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + SET0); + ipi_set0_regs[4] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + SET0); + ipi_set0_regs[5] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + SET0); + ipi_set0_regs[6] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + SET0); + ipi_set0_regs[7] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + SET0); + ipi_set0_regs[8] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + SET0); + ipi_set0_regs[9] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + SET0); + ipi_set0_regs[10] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + SET0); + ipi_set0_regs[11] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + SET0); + ipi_set0_regs[12] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + SET0); + ipi_set0_regs[13] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + SET0); + ipi_set0_regs[14] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + SET0); + ipi_set0_regs[15] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + SET0); +} + +static void ipi_clear0_regs_init(void) +{ + ipi_clear0_regs[0] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + CLEAR0); + ipi_clear0_regs[1] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + CLEAR0); + ipi_clear0_regs[2] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + CLEAR0); + ipi_clear0_regs[3] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + CLEAR0); + ipi_clear0_regs[4] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + CLEAR0); + ipi_clear0_regs[5] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + CLEAR0); + ipi_clear0_regs[6] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + CLEAR0); + ipi_clear0_regs[7] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + CLEAR0); + ipi_clear0_regs[8] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + CLEAR0); + ipi_clear0_regs[9] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + CLEAR0); + ipi_clear0_regs[10] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + CLEAR0); + ipi_clear0_regs[11] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + CLEAR0); + ipi_clear0_regs[12] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + CLEAR0); + ipi_clear0_regs[13] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + CLEAR0); + ipi_clear0_regs[14] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + CLEAR0); + ipi_clear0_regs[15] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + CLEAR0); +} + +static void ipi_status0_regs_init(void) +{ + ipi_status0_regs[0] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + STATUS0); + ipi_status0_regs[1] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + STATUS0); + ipi_status0_regs[2] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + STATUS0); + ipi_status0_regs[3] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + STATUS0); + ipi_status0_regs[4] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + STATUS0); + ipi_status0_regs[5] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + STATUS0); + ipi_status0_regs[6] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + STATUS0); + ipi_status0_regs[7] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + STATUS0); + ipi_status0_regs[8] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + STATUS0); + ipi_status0_regs[9] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + STATUS0); + ipi_status0_regs[10] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + STATUS0); + ipi_status0_regs[11] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + STATUS0); + ipi_status0_regs[12] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + STATUS0); + ipi_status0_regs[13] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + STATUS0); + ipi_status0_regs[14] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + STATUS0); + ipi_status0_regs[15] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + STATUS0); +} + +static void ipi_en0_regs_init(void) +{ + ipi_en0_regs[0] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + EN0); + ipi_en0_regs[1] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + EN0); + ipi_en0_regs[2] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + EN0); + ipi_en0_regs[3] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + EN0); + ipi_en0_regs[4] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + EN0); + ipi_en0_regs[5] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + EN0); + ipi_en0_regs[6] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + EN0); + ipi_en0_regs[7] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + EN0); + ipi_en0_regs[8] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + EN0); + ipi_en0_regs[9] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + EN0); + ipi_en0_regs[10] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + EN0); + ipi_en0_regs[11] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + EN0); + ipi_en0_regs[12] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + EN0); + ipi_en0_regs[13] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + EN0); + ipi_en0_regs[14] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + EN0); + ipi_en0_regs[15] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + EN0); +} + +static void ipi_mailbox_buf_init(void) +{ + ipi_mailbox_buf[0] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + BUF); + ipi_mailbox_buf[1] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + BUF); + ipi_mailbox_buf[2] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + BUF); + ipi_mailbox_buf[3] = (void *) + (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + BUF); + ipi_mailbox_buf[4] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + BUF); + ipi_mailbox_buf[5] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + BUF); + ipi_mailbox_buf[6] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + BUF); + ipi_mailbox_buf[7] = (void *) + (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + BUF); + ipi_mailbox_buf[8] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + BUF); + ipi_mailbox_buf[9] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + BUF); + ipi_mailbox_buf[10] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + BUF); + ipi_mailbox_buf[11] = (void *) + (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + BUF); + ipi_mailbox_buf[12] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + BUF); + ipi_mailbox_buf[13] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + BUF); + ipi_mailbox_buf[14] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + BUF); + ipi_mailbox_buf[15] = (void *) + (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + BUF); +} + +/* + * Simple enough, just poke the appropriate ipi register + */ +static void loongson3_send_ipi_single(int cpu, unsigned int action) +{ + loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(cpu)]); +} + +static void +loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action) +{ + unsigned int i; + + for_each_cpu(i, mask) + loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(i)]); +} + +#define IPI_IRQ_OFFSET 6 + +void loongson3_send_irq_by_ipi(int cpu, int irqs) +{ + loongson3_ipi_write32(irqs << IPI_IRQ_OFFSET, ipi_set0_regs[cpu_logical_map(cpu)]); +} + +void loongson3_ipi_interrupt(struct pt_regs *regs) +{ + int i, cpu = smp_processor_id(); + unsigned int action, c0count, irqs; + + /* Load the ipi register to figure out what we're supposed to do */ + action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]); + irqs = action >> IPI_IRQ_OFFSET; + + /* Clear the ipi register to clear the interrupt */ + loongson3_ipi_write32((u32)action, ipi_clear0_regs[cpu_logical_map(cpu)]); + + if (action & SMP_RESCHEDULE_YOURSELF) + scheduler_ipi(); + + if (action & SMP_CALL_FUNCTION) { + irq_enter(); + generic_smp_call_function_interrupt(); + irq_exit(); + } + + if (action & SMP_ASK_C0COUNT) { + BUG_ON(cpu != 0); + c0count = read_c0_count(); + c0count = c0count ? c0count : 1; + for (i = 1; i < nr_cpu_ids; i++) + core0_c0count[i] = c0count; + __wbflush(); /* Let others see the result ASAP */ + } + + if (irqs) { + int irq; + while ((irq = ffs(irqs))) { + do_IRQ(irq-1); + irqs &= ~(1<<(irq-1)); + } + } +} + +#define MAX_LOOPS 800 +/* + * SMP init and finish on secondary CPUs + */ +static void loongson3_init_secondary(void) +{ + int i; + uint32_t initcount; + unsigned int cpu = smp_processor_id(); + unsigned int imask = STATUSF_IP7 | STATUSF_IP6 | + STATUSF_IP3 | STATUSF_IP2; + + /* Set interrupt mask, but don't enable */ + change_c0_status(ST0_IM, imask); + + for (i = 0; i < num_possible_cpus(); i++) + loongson3_ipi_write32(0xffffffff, ipi_en0_regs[cpu_logical_map(i)]); + + per_cpu(cpu_state, cpu) = CPU_ONLINE; + cpu_set_core(&cpu_data[cpu], + cpu_logical_map(cpu) % loongson_sysconf.cores_per_package); + cpu_data[cpu].package = + cpu_logical_map(cpu) / loongson_sysconf.cores_per_package; + + i = 0; + core0_c0count[cpu] = 0; + loongson3_send_ipi_single(0, SMP_ASK_C0COUNT); + while (!core0_c0count[cpu]) { + i++; + cpu_relax(); + } + + if (i > MAX_LOOPS) + i = MAX_LOOPS; + if (cpu_data[cpu].package) + initcount = core0_c0count[cpu] + i; + else /* Local access is faster for loops */ + initcount = core0_c0count[cpu] + i/2; + + write_c0_count(initcount); +} + +static void loongson3_smp_finish(void) +{ + int cpu = smp_processor_id(); + + write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); + local_irq_enable(); + loongson3_ipi_write64(0, + (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x0)); + pr_info("CPU#%d finished, CP0_ST=%x\n", + smp_processor_id(), read_c0_status()); +} + +static void __init loongson3_smp_setup(void) +{ + int i = 0, num = 0; /* i: physical id, num: logical id */ + + init_cpu_possible(cpu_none_mask); + + /* For unified kernel, NR_CPUS is the maximum possible value, + * loongson_sysconf.nr_cpus is the really present value */ + while (i < loongson_sysconf.nr_cpus) { + if (loongson_sysconf.reserved_cpus_mask & (1<<i)) { + /* Reserved physical CPU cores */ + __cpu_number_map[i] = -1; + } else { + __cpu_number_map[i] = num; + __cpu_logical_map[num] = i; + set_cpu_possible(num, true); + num++; + } + i++; + } + pr_info("Detected %i available CPU(s)\n", num); + + while (num < loongson_sysconf.nr_cpus) { + __cpu_logical_map[num] = -1; + num++; + } + + ipi_set0_regs_init(); + ipi_clear0_regs_init(); + ipi_status0_regs_init(); + ipi_en0_regs_init(); + ipi_mailbox_buf_init(); + cpu_set_core(&cpu_data[0], + cpu_logical_map(0) % loongson_sysconf.cores_per_package); + cpu_data[0].package = cpu_logical_map(0) / loongson_sysconf.cores_per_package; +} + +static void __init loongson3_prepare_cpus(unsigned int max_cpus) +{ + init_cpu_present(cpu_possible_mask); + per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; +} + +/* + * Setup the PC, SP, and GP of a secondary processor and start it runing! + */ +static int loongson3_boot_secondary(int cpu, struct task_struct *idle) +{ + unsigned long startargs[4]; + + pr_info("Booting CPU#%d...\n", cpu); + + /* startargs[] are initial PC, SP and GP for secondary CPU */ + startargs[0] = (unsigned long)&smp_bootstrap; + startargs[1] = (unsigned long)__KSTK_TOS(idle); + startargs[2] = (unsigned long)task_thread_info(idle); + startargs[3] = 0; + + pr_debug("CPU#%d, func_pc=%lx, sp=%lx, gp=%lx\n", + cpu, startargs[0], startargs[1], startargs[2]); + + loongson3_ipi_write64(startargs[3], + (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x18)); + loongson3_ipi_write64(startargs[2], + (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x10)); + loongson3_ipi_write64(startargs[1], + (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x8)); + loongson3_ipi_write64(startargs[0], + (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x0)); + return 0; +} + +#ifdef CONFIG_HOTPLUG_CPU + +static int loongson3_cpu_disable(void) +{ + unsigned long flags; + unsigned int cpu = smp_processor_id(); + + if (cpu == 0) + return -EBUSY; + + set_cpu_online(cpu, false); + calculate_cpu_foreign_map(); + local_irq_save(flags); + fixup_irqs(); + local_irq_restore(flags); + local_flush_tlb_all(); + + return 0; +} + + +static void loongson3_cpu_die(unsigned int cpu) +{ + while (per_cpu(cpu_state, cpu) != CPU_DEAD) + cpu_relax(); + + mb(); +} + +/* To shutdown a core in Loongson 3, the target core should go to CKSEG1 and + * flush all L1 entries at first. Then, another core (usually Core 0) can + * safely disable the clock of the target core. loongson3_play_dead() is + * called via CKSEG1 (uncached and unmmaped) */ +static void loongson3a_r1_play_dead(int *state_addr) +{ + register int val; + register long cpuid, core, node, count; + register void *addr, *base, *initfunc; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " li %[addr], 0x80000000 \n" /* KSEG0 */ + "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */ + " cache 0, 1(%[addr]) \n" + " cache 0, 2(%[addr]) \n" + " cache 0, 3(%[addr]) \n" + " cache 1, 0(%[addr]) \n" /* flush L1 DCache */ + " cache 1, 1(%[addr]) \n" + " cache 1, 2(%[addr]) \n" + " cache 1, 3(%[addr]) \n" + " addiu %[sets], %[sets], -1 \n" + " bnez %[sets], 1b \n" + " addiu %[addr], %[addr], 0x20 \n" + " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ + " sw %[val], (%[state_addr]) \n" + " sync \n" + " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */ + " .set pop \n" + : [addr] "=&r" (addr), [val] "=&r" (val) + : [state_addr] "r" (state_addr), + [sets] "r" (cpu_data[smp_processor_id()].dcache.sets)); + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set mips64 \n" + " mfc0 %[cpuid], $15, 1 \n" + " andi %[cpuid], 0x3ff \n" + " dli %[base], 0x900000003ff01000 \n" + " andi %[core], %[cpuid], 0x3 \n" + " sll %[core], 8 \n" /* get core id */ + " or %[base], %[base], %[core] \n" + " andi %[node], %[cpuid], 0xc \n" + " dsll %[node], 42 \n" /* get node id */ + " or %[base], %[base], %[node] \n" + "1: li %[count], 0x100 \n" /* wait for init loop */ + "2: bnez %[count], 2b \n" /* limit mailbox access */ + " addiu %[count], -1 \n" + " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */ + " beqz %[initfunc], 1b \n" + " nop \n" + " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */ + " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */ + " ld $a1, 0x38(%[base]) \n" + " jr %[initfunc] \n" /* jump to initial PC */ + " nop \n" + " .set pop \n" + : [core] "=&r" (core), [node] "=&r" (node), + [base] "=&r" (base), [cpuid] "=&r" (cpuid), + [count] "=&r" (count), [initfunc] "=&r" (initfunc) + : /* No Input */ + : "a1"); +} + +static void loongson3a_r2r3_play_dead(int *state_addr) +{ + register int val; + register long cpuid, core, node, count; + register void *addr, *base, *initfunc; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " li %[addr], 0x80000000 \n" /* KSEG0 */ + "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */ + " cache 0, 1(%[addr]) \n" + " cache 0, 2(%[addr]) \n" + " cache 0, 3(%[addr]) \n" + " cache 1, 0(%[addr]) \n" /* flush L1 DCache */ + " cache 1, 1(%[addr]) \n" + " cache 1, 2(%[addr]) \n" + " cache 1, 3(%[addr]) \n" + " addiu %[sets], %[sets], -1 \n" + " bnez %[sets], 1b \n" + " addiu %[addr], %[addr], 0x40 \n" + " li %[addr], 0x80000000 \n" /* KSEG0 */ + "2: cache 2, 0(%[addr]) \n" /* flush L1 VCache */ + " cache 2, 1(%[addr]) \n" + " cache 2, 2(%[addr]) \n" + " cache 2, 3(%[addr]) \n" + " cache 2, 4(%[addr]) \n" + " cache 2, 5(%[addr]) \n" + " cache 2, 6(%[addr]) \n" + " cache 2, 7(%[addr]) \n" + " cache 2, 8(%[addr]) \n" + " cache 2, 9(%[addr]) \n" + " cache 2, 10(%[addr]) \n" + " cache 2, 11(%[addr]) \n" + " cache 2, 12(%[addr]) \n" + " cache 2, 13(%[addr]) \n" + " cache 2, 14(%[addr]) \n" + " cache 2, 15(%[addr]) \n" + " addiu %[vsets], %[vsets], -1 \n" + " bnez %[vsets], 2b \n" + " addiu %[addr], %[addr], 0x40 \n" + " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ + " sw %[val], (%[state_addr]) \n" + " sync \n" + " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */ + " .set pop \n" + : [addr] "=&r" (addr), [val] "=&r" (val) + : [state_addr] "r" (state_addr), + [sets] "r" (cpu_data[smp_processor_id()].dcache.sets), + [vsets] "r" (cpu_data[smp_processor_id()].vcache.sets)); + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set mips64 \n" + " mfc0 %[cpuid], $15, 1 \n" + " andi %[cpuid], 0x3ff \n" + " dli %[base], 0x900000003ff01000 \n" + " andi %[core], %[cpuid], 0x3 \n" + " sll %[core], 8 \n" /* get core id */ + " or %[base], %[base], %[core] \n" + " andi %[node], %[cpuid], 0xc \n" + " dsll %[node], 42 \n" /* get node id */ + " or %[base], %[base], %[node] \n" + "1: li %[count], 0x100 \n" /* wait for init loop */ + "2: bnez %[count], 2b \n" /* limit mailbox access */ + " addiu %[count], -1 \n" + " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */ + " beqz %[initfunc], 1b \n" + " nop \n" + " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */ + " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */ + " ld $a1, 0x38(%[base]) \n" + " jr %[initfunc] \n" /* jump to initial PC */ + " nop \n" + " .set pop \n" + : [core] "=&r" (core), [node] "=&r" (node), + [base] "=&r" (base), [cpuid] "=&r" (cpuid), + [count] "=&r" (count), [initfunc] "=&r" (initfunc) + : /* No Input */ + : "a1"); +} + +static void loongson3b_play_dead(int *state_addr) +{ + register int val; + register long cpuid, core, node, count; + register void *addr, *base, *initfunc; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " li %[addr], 0x80000000 \n" /* KSEG0 */ + "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */ + " cache 0, 1(%[addr]) \n" + " cache 0, 2(%[addr]) \n" + " cache 0, 3(%[addr]) \n" + " cache 1, 0(%[addr]) \n" /* flush L1 DCache */ + " cache 1, 1(%[addr]) \n" + " cache 1, 2(%[addr]) \n" + " cache 1, 3(%[addr]) \n" + " addiu %[sets], %[sets], -1 \n" + " bnez %[sets], 1b \n" + " addiu %[addr], %[addr], 0x20 \n" + " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ + " sw %[val], (%[state_addr]) \n" + " sync \n" + " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */ + " .set pop \n" + : [addr] "=&r" (addr), [val] "=&r" (val) + : [state_addr] "r" (state_addr), + [sets] "r" (cpu_data[smp_processor_id()].dcache.sets)); + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set mips64 \n" + " mfc0 %[cpuid], $15, 1 \n" + " andi %[cpuid], 0x3ff \n" + " dli %[base], 0x900000003ff01000 \n" + " andi %[core], %[cpuid], 0x3 \n" + " sll %[core], 8 \n" /* get core id */ + " or %[base], %[base], %[core] \n" + " andi %[node], %[cpuid], 0xc \n" + " dsll %[node], 42 \n" /* get node id */ + " or %[base], %[base], %[node] \n" + " dsrl %[node], 30 \n" /* 15:14 */ + " or %[base], %[base], %[node] \n" + "1: li %[count], 0x100 \n" /* wait for init loop */ + "2: bnez %[count], 2b \n" /* limit mailbox access */ + " addiu %[count], -1 \n" + " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */ + " beqz %[initfunc], 1b \n" + " nop \n" + " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */ + " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */ + " ld $a1, 0x38(%[base]) \n" + " jr %[initfunc] \n" /* jump to initial PC */ + " nop \n" + " .set pop \n" + : [core] "=&r" (core), [node] "=&r" (node), + [base] "=&r" (base), [cpuid] "=&r" (cpuid), + [count] "=&r" (count), [initfunc] "=&r" (initfunc) + : /* No Input */ + : "a1"); +} + +void play_dead(void) +{ + int *state_addr; + unsigned int cpu = smp_processor_id(); + void (*play_dead_at_ckseg1)(int *); + + idle_task_exit(); + switch (read_c0_prid() & PRID_REV_MASK) { + case PRID_REV_LOONGSON3A_R1: + default: + play_dead_at_ckseg1 = + (void *)CKSEG1ADDR((unsigned long)loongson3a_r1_play_dead); + break; + case PRID_REV_LOONGSON3A_R2: + case PRID_REV_LOONGSON3A_R3_0: + case PRID_REV_LOONGSON3A_R3_1: + play_dead_at_ckseg1 = + (void *)CKSEG1ADDR((unsigned long)loongson3a_r2r3_play_dead); + break; + case PRID_REV_LOONGSON3B_R1: + case PRID_REV_LOONGSON3B_R2: + play_dead_at_ckseg1 = + (void *)CKSEG1ADDR((unsigned long)loongson3b_play_dead); + break; + } + state_addr = &per_cpu(cpu_state, cpu); + mb(); + play_dead_at_ckseg1(state_addr); +} + +static int loongson3_disable_clock(unsigned int cpu) +{ + uint64_t core_id = cpu_core(&cpu_data[cpu]); + uint64_t package_id = cpu_data[cpu].package; + + if ((read_c0_prid() & PRID_REV_MASK) == PRID_REV_LOONGSON3A_R1) { + LOONGSON_CHIPCFG(package_id) &= ~(1 << (12 + core_id)); + } else { + if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG)) + LOONGSON_FREQCTRL(package_id) &= ~(1 << (core_id * 4 + 3)); + } + return 0; +} + +static int loongson3_enable_clock(unsigned int cpu) +{ + uint64_t core_id = cpu_core(&cpu_data[cpu]); + uint64_t package_id = cpu_data[cpu].package; + + if ((read_c0_prid() & PRID_REV_MASK) == PRID_REV_LOONGSON3A_R1) { + LOONGSON_CHIPCFG(package_id) |= 1 << (12 + core_id); + } else { + if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG)) + LOONGSON_FREQCTRL(package_id) |= 1 << (core_id * 4 + 3); + } + return 0; +} + +static int register_loongson3_notifier(void) +{ + return cpuhp_setup_state_nocalls(CPUHP_MIPS_SOC_PREPARE, + "mips/loongson:prepare", + loongson3_enable_clock, + loongson3_disable_clock); +} +early_initcall(register_loongson3_notifier); + +#endif + +const struct plat_smp_ops loongson3_smp_ops = { + .send_ipi_single = loongson3_send_ipi_single, + .send_ipi_mask = loongson3_send_ipi_mask, + .init_secondary = loongson3_init_secondary, + .smp_finish = loongson3_smp_finish, + .boot_secondary = loongson3_boot_secondary, + .smp_setup = loongson3_smp_setup, + .prepare_cpus = loongson3_prepare_cpus, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = loongson3_cpu_disable, + .cpu_die = loongson3_cpu_die, +#endif +}; diff --git a/arch/mips/loongson64/loongson-3/smp.h b/arch/mips/loongson64/loongson-3/smp.h new file mode 100644 index 000000000..957bde81e --- /dev/null +++ b/arch/mips/loongson64/loongson-3/smp.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LOONGSON_SMP_H_ +#define __LOONGSON_SMP_H_ + +/* for Loongson-3 smp support */ +extern unsigned long long smp_group[4]; + +/* 4 groups(nodes) in maximum in numa case */ +#define SMP_CORE_GROUP0_BASE (smp_group[0]) +#define SMP_CORE_GROUP1_BASE (smp_group[1]) +#define SMP_CORE_GROUP2_BASE (smp_group[2]) +#define SMP_CORE_GROUP3_BASE (smp_group[3]) + +/* 4 cores in each group(node) */ +#define SMP_CORE0_OFFSET 0x000 +#define SMP_CORE1_OFFSET 0x100 +#define SMP_CORE2_OFFSET 0x200 +#define SMP_CORE3_OFFSET 0x300 + +/* ipi registers offsets */ +#define STATUS0 0x00 +#define EN0 0x04 +#define SET0 0x08 +#define CLEAR0 0x0c +#define STATUS1 0x10 +#define MASK1 0x14 +#define SET1 0x18 +#define CLEAR1 0x1c +#define BUF 0x20 + +#endif |