diff options
Diffstat (limited to 'arch/powerpc/boot/dts/lite5200b.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/lite5200b.dts | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts new file mode 100644 index 000000000..29419cf81 --- /dev/null +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -0,0 +1,161 @@ +/* + * Lite5200B board Device Tree Source + * + * Copyright 2006-2007 Secret Lab Technologies Ltd. + * Grant Likely <grant.likely@secretlab.ca> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; + +/ { + model = "fsl,lite5200b"; + compatible = "fsl,lite5200b"; + + leds { + compatible = "gpio-leds"; + tmr2 { + gpios = <&gpt2 0 1>; + }; + tmr3 { + gpios = <&gpt3 0 1>; + linux,default-trigger = "heartbeat"; + }; + led1 { gpios = <&gpio_wkup 2 1>; }; + led2 { gpios = <&gpio_simple 3 1>; }; + led3 { gpios = <&gpio_wkup 3 1>; }; + led4 { gpios = <&gpio_simple 2 1>; }; + }; + + memory@0 { + reg = <0x00000000 0x10000000>; // 256MB + }; + + soc5200@f0000000 { + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + cell-index = <0>; + }; + + psc@2200 { // PSC2 + status = "disabled"; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + status = "disabled"; + }; + + psc@2c00 { // PSC6 + status = "disabled"; + }; + + // PSC2 in ac97 mode example + //ac97@2200 { // PSC2 + // compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; + // cell-index = <1>; + //}; + + // PSC3 in CODEC mode example + //i2s@2400 { // PSC3 + // compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible + // cell-index = <2>; + //}; + + // PSC6 in spi mode example + //spi@2c00 { // PSC6 + // compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; + // cell-index = <5>; + //}; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + i2c@3d40 { + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 + + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + }; + + localbus { + ranges = <0 0 0xfe000000 0x02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <1>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "rootfs"; + reg = <0x00200000 0x01d00000>; + }; + partition@1f00000 { + label = "u-boot"; + reg = <0x01f00000 0x00060000>; + }; + partition@1f60000 { + label = "u-boot-env"; + reg = <0x01f60000 0x00020000>; + }; + partition@1f80000 { + label = "dtb"; + reg = <0x01f80000 0x00080000>; + }; + }; + }; + +}; |