1 files changed, 110 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
new file mode 100644
index 000000000..836e47cc4
--- /dev/null
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -0,0 +1,110 @@
+/*
+ * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
+ *
+ * Copyright 2006 Pengutronix
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright 2007 Pengutronix
+ * Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
+/ {
+	model = "phytec,pcm030";
+	compatible = "phytec,pcm030";
+
+	soc5200@f0000000 {
+		audioplatform: psc@2000 { /* PSC1 in ac97 mode */
+			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
+			cell-index = <0>;
+		};
+
+		/* PSC2 port is used by CAN1/2 */
+		psc@2200 {
+			status = "disabled";
+		};
+
+		psc@2400 { /* PSC3 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		/* PSC4 is ??? */
+		psc@2600 {
+			status = "disabled";
+		};
+
+		/* PSC5 is ??? */
+		psc@2800 {
+			status = "disabled";
+		};
+
+		psc@2c00 { /* PSC6 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		i2c@3d40 {
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "catalyst,24c32", "atmel,24c32";
+				reg = <0x52>;
+				pagesize = <32>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+				 0xc000 0 0 2 &mpc5200_pic 1 1 3
+				 0xc000 0 0 3 &mpc5200_pic 1 2 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3
+
+				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+				 0xc800 0 0 2 &mpc5200_pic 1 2 3
+				 0xc800 0 0 3 &mpc5200_pic 1 3 3
+				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+	};
+
+	localbus {
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "phytec,pcm030-audio-fabric";
+		asoc-platform = <&audioplatform>;
+	};
+};