diff options
Diffstat (limited to 'arch/powerpc/include/asm/prom.h')
| -rw-r--r-- | arch/powerpc/include/asm/prom.h | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h new file mode 100644 index 000000000..b04c5ce81 --- /dev/null +++ b/arch/powerpc/include/asm/prom.h @@ -0,0 +1,184 @@ +#ifndef _POWERPC_PROM_H +#define _POWERPC_PROM_H +#ifdef __KERNEL__ + +/* + * Definitions for talking to the Open Firmware PROM on + * Power Macintosh computers. + * + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/types.h> +#include <asm/irq.h> +#include <linux/atomic.h> + +/* These includes should be removed once implicit includes are cleaned up. */ +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> + +#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ +#define OF_DT_END_NODE 0x2 /* End node */ +#define OF_DT_PROP 0x3 /* Property: name off, size, + * content */ +#define OF_DT_NOP 0x4 /* nop */ +#define OF_DT_END 0x9 + +#define OF_DT_VERSION 0x10 + +/* + * This is what gets passed to the kernel by prom_init or kexec + * + * The dt struct contains the device tree structure, full pathes and + * property contents. The dt strings contain a separate block with just + * the strings for the property names, and is fully page aligned and + * self contained in a page, so that it can be kept around by the kernel, + * each property name appears only once in this page (cheap compression) + * + * the mem_rsvmap contains a map of reserved ranges of physical memory, + * passing it here instead of in the device-tree itself greatly simplifies + * the job of everybody. It's just a list of u64 pairs (base/size) that + * ends when size is 0 + */ +struct boot_param_header { + __be32 magic; /* magic word OF_DT_HEADER */ + __be32 totalsize; /* total size of DT block */ + __be32 off_dt_struct; /* offset to structure */ + __be32 off_dt_strings; /* offset to strings */ + __be32 off_mem_rsvmap; /* offset to memory reserve map */ + __be32 version; /* format version */ + __be32 last_comp_version; /* last compatible version */ + /* version 2 fields below */ + __be32 boot_cpuid_phys; /* Physical CPU id we're booting on */ + /* version 3 fields below */ + __be32 dt_strings_size; /* size of the DT strings block */ + /* version 17 fields below */ + __be32 dt_struct_size; /* size of the DT structure block */ +}; + +/* + * OF address retreival & translation + */ + +/* Parse the ibm,dma-window property of an OF node into the busno, phys and + * size parameters. + */ +void of_parse_dma_window(struct device_node *dn, const __be32 *dma_window, + unsigned long *busno, unsigned long *phys, + unsigned long *size); + +extern void of_instantiate_rtc(void); + +extern int of_get_ibm_chip_id(struct device_node *np); + +struct of_drc_info { + char *drc_type; + char *drc_name_prefix; + u32 drc_index_start; + u32 drc_name_suffix_start; + u32 num_sequential_elems; + u32 sequential_inc; + u32 drc_power_domain; + u32 last_drc_index; +}; + +extern int of_read_drc_info_cell(struct property **prop, + const __be32 **curval, struct of_drc_info *data); + + +/* + * There are two methods for telling firmware what our capabilities are. + * Newer machines have an "ibm,client-architecture-support" method on the + * root node. For older machines, we have to call the "process-elf-header" + * method in the /packages/elf-loader node, passing it a fake 32-bit + * ELF header containing a couple of PT_NOTE sections that contain + * structures that contain various information. + */ + +/* New method - extensible architecture description vector. */ + +/* Option vector bits - generic bits in byte 1 */ +#define OV_IGNORE 0x80 /* ignore this vector */ +#define OV_CESSATION_POLICY 0x40 /* halt if unsupported option present*/ + +/* Option vector 1: processor architectures supported */ +#define OV1_PPC_2_00 0x80 /* set if we support PowerPC 2.00 */ +#define OV1_PPC_2_01 0x40 /* set if we support PowerPC 2.01 */ +#define OV1_PPC_2_02 0x20 /* set if we support PowerPC 2.02 */ +#define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */ +#define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */ +#define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */ +#define OV1_PPC_2_06 0x02 /* set if we support PowerPC 2.06 */ +#define OV1_PPC_2_07 0x01 /* set if we support PowerPC 2.07 */ + +#define OV1_PPC_3_00 0x80 /* set if we support PowerPC 3.00 */ + +/* Option vector 2: Open Firmware options supported */ +#define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */ + +/* Option vector 3: processor options supported */ +#define OV3_FP 0x80 /* floating point */ +#define OV3_VMX 0x40 /* VMX/Altivec */ +#define OV3_DFP 0x20 /* decimal FP */ + +/* Option vector 4: IBM PAPR implementation */ +#define OV4_MIN_ENT_CAP 0x01 /* minimum VP entitled capacity */ + +/* Option vector 5: PAPR/OF options supported + * These bits are also used in firmware_has_feature() to validate + * the capabilities reported for vector 5 in the device tree so we + * encode the vector index in the define and use the OV5_FEAT() + * and OV5_INDX() macros to extract the desired information. + */ +#define OV5_FEAT(x) ((x) & 0xff) +#define OV5_INDX(x) ((x) >> 8) +#define OV5_LPAR 0x0280 /* logical partitioning supported */ +#define OV5_SPLPAR 0x0240 /* shared-processor LPAR supported */ +/* ibm,dynamic-reconfiguration-memory property supported */ +#define OV5_DRCONF_MEMORY 0x0220 +#define OV5_LARGE_PAGES 0x0210 /* large pages supported */ +#define OV5_DONATE_DEDICATE_CPU 0x0202 /* donate dedicated CPU support */ +#define OV5_MSI 0x0201 /* PCIe/MSI support */ +#define OV5_CMO 0x0480 /* Cooperative Memory Overcommitment */ +#define OV5_XCMO 0x0440 /* Page Coalescing */ +#define OV5_TYPE1_AFFINITY 0x0580 /* Type 1 NUMA affinity */ +#define OV5_PRRN 0x0540 /* Platform Resource Reassignment */ +#define OV5_HP_EVT 0x0604 /* Hot Plug Event support */ +#define OV5_RESIZE_HPT 0x0601 /* Hash Page Table resizing */ +#define OV5_PFO_HW_RNG 0x1180 /* PFO Random Number Generator */ +#define OV5_PFO_HW_842 0x1140 /* PFO Compression Accelerator */ +#define OV5_PFO_HW_ENCR 0x1120 /* PFO Encryption Accelerator */ +#define OV5_SUB_PROCESSORS 0x1501 /* 1,2,or 4 Sub-Processors supported */ +#define OV5_DRMEM_V2 0x1680 /* ibm,dynamic-reconfiguration-v2 */ +#define OV5_XIVE_SUPPORT 0x17C0 /* XIVE Exploitation Support Mask */ +#define OV5_XIVE_LEGACY 0x1700 /* XIVE legacy mode Only */ +#define OV5_XIVE_EXPLOIT 0x1740 /* XIVE exploitation mode Only */ +#define OV5_XIVE_EITHER 0x1780 /* XIVE legacy or exploitation mode */ +/* MMU Base Architecture */ +#define OV5_MMU_SUPPORT 0x18C0 /* MMU Mode Support Mask */ +#define OV5_MMU_HASH 0x1800 /* Hash MMU Only */ +#define OV5_MMU_RADIX 0x1840 /* Radix MMU Only */ +#define OV5_MMU_EITHER 0x1880 /* Hash or Radix Supported */ +#define OV5_MMU_DYNAMIC 0x18C0 /* Hash or Radix Can Switch Later */ +#define OV5_NMMU 0x1820 /* Nest MMU Available */ +/* Hash Table Extensions */ +#define OV5_HASH_SEG_TBL 0x1980 /* In Memory Segment Tables Available */ +#define OV5_HASH_GTSE 0x1940 /* Guest Translation Shoot Down Avail */ +/* Radix Table Extensions */ +#define OV5_RADIX_GTSE 0x1A40 /* Guest Translation Shoot Down Avail */ +#define OV5_DRC_INFO 0x1640 /* Redef Prop Structures: drc-info */ + +/* Option Vector 6: IBM PAPR hints */ +#define OV6_LINUX 0x02 /* Linux is our OS */ + +#endif /* __KERNEL__ */ +#endif /* _POWERPC_PROM_H */ |