diff options
Diffstat (limited to 'arch/powerpc/kernel/cpu_setup_6xx.S')
| -rw-r--r-- | arch/powerpc/kernel/cpu_setup_6xx.S | 490 |
1 files changed, 490 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S new file mode 100644 index 000000000..fa3c2c912 --- /dev/null +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -0,0 +1,490 @@ +/* + * This file contains low level CPU setup functions. + * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/cputable.h> +#include <asm/ppc_asm.h> +#include <asm/asm-offsets.h> +#include <asm/cache.h> +#include <asm/mmu.h> +#include <asm/feature-fixups.h> + +_GLOBAL(__setup_cpu_603) + mflr r5 +BEGIN_MMU_FTR_SECTION + li r10,0 + mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */ +END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU) +BEGIN_FTR_SECTION + bl __init_fpu_registers +END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE) + bl setup_common_caches + mtlr r5 + blr +_GLOBAL(__setup_cpu_604) + mflr r5 + bl setup_common_caches + bl setup_604_hid0 + mtlr r5 + blr +_GLOBAL(__setup_cpu_750) + mflr r5 + bl __init_fpu_registers + bl setup_common_caches + bl setup_750_7400_hid0 + mtlr r5 + blr +_GLOBAL(__setup_cpu_750cx) + mflr r5 + bl __init_fpu_registers + bl setup_common_caches + bl setup_750_7400_hid0 + bl setup_750cx + mtlr r5 + blr +_GLOBAL(__setup_cpu_750fx) + mflr r5 + bl __init_fpu_registers + bl setup_common_caches + bl setup_750_7400_hid0 + bl setup_750fx + mtlr r5 + blr +_GLOBAL(__setup_cpu_7400) + mflr r5 + bl __init_fpu_registers + bl setup_7400_workarounds + bl setup_common_caches + bl setup_750_7400_hid0 + mtlr r5 + blr +_GLOBAL(__setup_cpu_7410) + mflr r5 + bl __init_fpu_registers + bl setup_7410_workarounds + bl setup_common_caches + bl setup_750_7400_hid0 + li r3,0 + mtspr SPRN_L2CR2,r3 + mtlr r5 + blr +_GLOBAL(__setup_cpu_745x) + mflr r5 + bl setup_common_caches + bl setup_745x_specifics + mtlr r5 + blr + +/* Enable caches for 603's, 604, 750 & 7400 */ +setup_common_caches: + mfspr r11,SPRN_HID0 + andi. r0,r11,HID0_DCE + ori r11,r11,HID0_ICE|HID0_DCE + ori r8,r11,HID0_ICFI + bne 1f /* don't invalidate the D-cache */ + ori r8,r8,HID0_DCI /* unless it wasn't enabled */ +1: sync + mtspr SPRN_HID0,r8 /* enable and invalidate caches */ + sync + mtspr SPRN_HID0,r11 /* enable caches */ + sync + isync + blr + +/* 604, 604e, 604ev, ... + * Enable superscalar execution & branch history table + */ +setup_604_hid0: + mfspr r11,SPRN_HID0 + ori r11,r11,HID0_SIED|HID0_BHTE + ori r8,r11,HID0_BTCD + sync + mtspr SPRN_HID0,r8 /* flush branch target address cache */ + sync /* on 604e/604r */ + mtspr SPRN_HID0,r11 + sync + isync + blr + +/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some + * erratas we work around here. + * Moto MPC710CE.pdf describes them, those are errata + * #3, #4 and #5 + * Note that we assume the firmware didn't choose to + * apply other workarounds (there are other ones documented + * in the .pdf). It appear that Apple firmware only works + * around #3 and with the same fix we use. We may want to + * check if the CPU is using 60x bus mode in which case + * the workaround for errata #4 is useless. Also, we may + * want to explicitly clear HID0_NOPDST as this is not + * needed once we have applied workaround #5 (though it's + * not set by Apple's firmware at least). + */ +setup_7400_workarounds: + mfpvr r3 + rlwinm r3,r3,0,20,31 + cmpwi 0,r3,0x0207 + ble 1f + blr +setup_7410_workarounds: + mfpvr r3 + rlwinm r3,r3,0,20,31 + cmpwi 0,r3,0x0100 + bnelr +1: + mfspr r11,SPRN_MSSSR0 + /* Errata #3: Set L1OPQ_SIZE to 0x10 */ + rlwinm r11,r11,0,9,6 + oris r11,r11,0x0100 + /* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */ + oris r11,r11,0x0002 + /* Errata #5: Set DRLT_SIZE to 0x01 */ + rlwinm r11,r11,0,5,2 + oris r11,r11,0x0800 + sync + mtspr SPRN_MSSSR0,r11 + sync + isync + blr + +/* 740/750/7400/7410 + * Enable Store Gathering (SGE), Address Broadcast (ABE), + * Branch History Table (BHTE), Branch Target ICache (BTIC) + * Dynamic Power Management (DPM), Speculative (SPD) + * Clear Instruction cache throttling (ICTC) + */ +setup_750_7400_hid0: + mfspr r11,SPRN_HID0 + ori r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC + oris r11,r11,HID0_DPM@h +BEGIN_FTR_SECTION + xori r11,r11,HID0_BTIC +END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC) +BEGIN_FTR_SECTION + xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */ +END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM) + li r3,HID0_SPD + andc r11,r11,r3 /* clear SPD: enable speculative */ + li r3,0 + mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */ + isync + mtspr SPRN_HID0,r11 + sync + isync + blr + +/* 750cx specific + * Looks like we have to disable NAP feature for some PLL settings... + * (waiting for confirmation) + */ +setup_750cx: + mfspr r10, SPRN_HID1 + rlwinm r10,r10,4,28,31 + cmpwi cr0,r10,7 + cmpwi cr1,r10,9 + cmpwi cr2,r10,11 + cror 4*cr0+eq,4*cr0+eq,4*cr1+eq + cror 4*cr0+eq,4*cr0+eq,4*cr2+eq + bnelr + lwz r6,CPU_SPEC_FEATURES(r4) + li r7,CPU_FTR_CAN_NAP + andc r6,r6,r7 + stw r6,CPU_SPEC_FEATURES(r4) + blr + +/* 750fx specific + */ +setup_750fx: + blr + +/* MPC 745x + * Enable Store Gathering (SGE), Branch Folding (FOLD) + * Branch History Table (BHTE), Branch Target ICache (BTIC) + * Dynamic Power Management (DPM), Speculative (SPD) + * Ensure our data cache instructions really operate. + * Timebase has to be running or we wouldn't have made it here, + * just ensure we don't disable it. + * Clear Instruction cache throttling (ICTC) + * Enable L2 HW prefetch + */ +setup_745x_specifics: + /* We check for the presence of an L3 cache setup by + * the firmware. If any, we disable NAP capability as + * it's known to be bogus on rev 2.1 and earlier + */ +BEGIN_FTR_SECTION + mfspr r11,SPRN_L3CR + andis. r11,r11,L3CR_L3E@h + beq 1f +END_FTR_SECTION_IFSET(CPU_FTR_L3CR) + lwz r6,CPU_SPEC_FEATURES(r4) + andis. r0,r6,CPU_FTR_L3_DISABLE_NAP@h + beq 1f + li r7,CPU_FTR_CAN_NAP + andc r6,r6,r7 + stw r6,CPU_SPEC_FEATURES(r4) +1: + mfspr r11,SPRN_HID0 + + /* All of the bits we have to set..... + */ + ori r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE + ori r11,r11,HID0_LRSTK | HID0_BTIC + oris r11,r11,HID0_DPM@h +BEGIN_MMU_FTR_SECTION + oris r11,r11,HID0_HIGH_BAT@h +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) +BEGIN_FTR_SECTION + xori r11,r11,HID0_BTIC +END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC) +BEGIN_FTR_SECTION + xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */ +END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM) + + /* All of the bits we have to clear.... + */ + li r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI + andc r11,r11,r3 /* clear SPD: enable speculative */ + li r3,0 + + mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */ + isync + mtspr SPRN_HID0,r11 + sync + isync + + /* Enable L2 HW prefetch, if L2 is enabled + */ + mfspr r3,SPRN_L2CR + andis. r3,r3,L2CR_L2E@h + beqlr + mfspr r3,SPRN_MSSCR0 + ori r3,r3,3 + sync + mtspr SPRN_MSSCR0,r3 + sync + isync + blr + +/* + * Initialize the FPU registers. This is needed to work around an errata + * in some 750 cpus where using a not yet initialized FPU register after + * power on reset may hang the CPU + */ +_GLOBAL(__init_fpu_registers) + mfmsr r10 + ori r11,r10,MSR_FP + mtmsr r11 + isync + addis r9,r3,empty_zero_page@ha + addi r9,r9,empty_zero_page@l + REST_32FPRS(0,r9) + sync + mtmsr r10 + isync + blr + + +/* Definitions for the table use to save CPU states */ +#define CS_HID0 0 +#define CS_HID1 4 +#define CS_HID2 8 +#define CS_MSSCR0 12 +#define CS_MSSSR0 16 +#define CS_ICTRL 20 +#define CS_LDSTCR 24 +#define CS_LDSTDB 28 +#define CS_SIZE 32 + + .data + .balign L1_CACHE_BYTES +cpu_state_storage: + .space CS_SIZE + .balign L1_CACHE_BYTES,0 + .text + +/* Called in normal context to backup CPU 0 state. This + * does not include cache settings. This function is also + * called for machine sleep. This does not include the MMU + * setup, BATs, etc... but rather the "special" registers + * like HID0, HID1, MSSCR0, etc... + */ +_GLOBAL(__save_cpu_setup) + /* Some CR fields are volatile, we back it up all */ + mfcr r7 + + /* Get storage ptr */ + lis r5,cpu_state_storage@h + ori r5,r5,cpu_state_storage@l + + /* Save HID0 (common to all CONFIG_6xx cpus) */ + mfspr r3,SPRN_HID0 + stw r3,CS_HID0(r5) + + /* Now deal with CPU type dependent registers */ + mfspr r3,SPRN_PVR + srwi r3,r3,16 + cmplwi cr0,r3,0x8000 /* 7450 */ + cmplwi cr1,r3,0x000c /* 7400 */ + cmplwi cr2,r3,0x800c /* 7410 */ + cmplwi cr3,r3,0x8001 /* 7455 */ + cmplwi cr4,r3,0x8002 /* 7457 */ + cmplwi cr5,r3,0x8003 /* 7447A */ + cmplwi cr6,r3,0x7000 /* 750FX */ + cmplwi cr7,r3,0x8004 /* 7448 */ + /* cr1 is 7400 || 7410 */ + cror 4*cr1+eq,4*cr1+eq,4*cr2+eq + /* cr0 is 74xx */ + cror 4*cr0+eq,4*cr0+eq,4*cr3+eq + cror 4*cr0+eq,4*cr0+eq,4*cr4+eq + cror 4*cr0+eq,4*cr0+eq,4*cr1+eq + cror 4*cr0+eq,4*cr0+eq,4*cr5+eq + cror 4*cr0+eq,4*cr0+eq,4*cr7+eq + bne 1f + /* Backup 74xx specific regs */ + mfspr r4,SPRN_MSSCR0 + stw r4,CS_MSSCR0(r5) + mfspr r4,SPRN_MSSSR0 + stw r4,CS_MSSSR0(r5) + beq cr1,1f + /* Backup 745x specific registers */ + mfspr r4,SPRN_HID1 + stw r4,CS_HID1(r5) + mfspr r4,SPRN_ICTRL + stw r4,CS_ICTRL(r5) + mfspr r4,SPRN_LDSTCR + stw r4,CS_LDSTCR(r5) + mfspr r4,SPRN_LDSTDB + stw r4,CS_LDSTDB(r5) +1: + bne cr6,1f + /* Backup 750FX specific registers */ + mfspr r4,SPRN_HID1 + stw r4,CS_HID1(r5) + /* If rev 2.x, backup HID2 */ + mfspr r3,SPRN_PVR + andi. r3,r3,0xff00 + cmpwi cr0,r3,0x0200 + bne 1f + mfspr r4,SPRN_HID2 + stw r4,CS_HID2(r5) +1: + mtcr r7 + blr + +/* Called with no MMU context (typically MSR:IR/DR off) to + * restore CPU state as backed up by the previous + * function. This does not include cache setting + */ +_GLOBAL(__restore_cpu_setup) + /* Some CR fields are volatile, we back it up all */ + mfcr r7 + + /* Get storage ptr */ + lis r5,(cpu_state_storage-KERNELBASE)@h + ori r5,r5,cpu_state_storage@l + + /* Restore HID0 */ + lwz r3,CS_HID0(r5) + sync + isync + mtspr SPRN_HID0,r3 + sync + isync + + /* Now deal with CPU type dependent registers */ + mfspr r3,SPRN_PVR + srwi r3,r3,16 + cmplwi cr0,r3,0x8000 /* 7450 */ + cmplwi cr1,r3,0x000c /* 7400 */ + cmplwi cr2,r3,0x800c /* 7410 */ + cmplwi cr3,r3,0x8001 /* 7455 */ + cmplwi cr4,r3,0x8002 /* 7457 */ + cmplwi cr5,r3,0x8003 /* 7447A */ + cmplwi cr6,r3,0x7000 /* 750FX */ + cmplwi cr7,r3,0x8004 /* 7448 */ + /* cr1 is 7400 || 7410 */ + cror 4*cr1+eq,4*cr1+eq,4*cr2+eq + /* cr0 is 74xx */ + cror 4*cr0+eq,4*cr0+eq,4*cr3+eq + cror 4*cr0+eq,4*cr0+eq,4*cr4+eq + cror 4*cr0+eq,4*cr0+eq,4*cr1+eq + cror 4*cr0+eq,4*cr0+eq,4*cr5+eq + cror 4*cr0+eq,4*cr0+eq,4*cr7+eq + bne 2f + /* Restore 74xx specific regs */ + lwz r4,CS_MSSCR0(r5) + sync + mtspr SPRN_MSSCR0,r4 + sync + isync + lwz r4,CS_MSSSR0(r5) + sync + mtspr SPRN_MSSSR0,r4 + sync + isync + bne cr2,1f + /* Clear 7410 L2CR2 */ + li r4,0 + mtspr SPRN_L2CR2,r4 +1: beq cr1,2f + /* Restore 745x specific registers */ + lwz r4,CS_HID1(r5) + sync + mtspr SPRN_HID1,r4 + isync + sync + lwz r4,CS_ICTRL(r5) + sync + mtspr SPRN_ICTRL,r4 + isync + sync + lwz r4,CS_LDSTCR(r5) + sync + mtspr SPRN_LDSTCR,r4 + isync + sync + lwz r4,CS_LDSTDB(r5) + sync + mtspr SPRN_LDSTDB,r4 + isync + sync +2: bne cr6,1f + /* Restore 750FX specific registers + * that is restore HID2 on rev 2.x and PLL config & switch + * to PLL 0 on all + */ + /* If rev 2.x, restore HID2 with low voltage bit cleared */ + mfspr r3,SPRN_PVR + andi. r3,r3,0xff00 + cmpwi cr0,r3,0x0200 + bne 4f + lwz r4,CS_HID2(r5) + rlwinm r4,r4,0,19,17 + mtspr SPRN_HID2,r4 + sync +4: + lwz r4,CS_HID1(r5) + rlwinm r5,r4,0,16,14 + mtspr SPRN_HID1,r5 + /* Wait for PLL to stabilize */ + mftbl r5 +3: mftbl r6 + sub r6,r6,r5 + cmplwi cr0,r6,10000 + ble 3b + /* Setup final PLL */ + mtspr SPRN_HID1,r4 +1: + mtcr r7 + blr + |