diff options
Diffstat (limited to 'arch/powerpc/kernel/exceptions-64e.S')
| -rw-r--r-- | arch/powerpc/kernel/exceptions-64e.S | 1702 |
1 files changed, 1702 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S new file mode 100644 index 000000000..447defdd4 --- /dev/null +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -0,0 +1,1702 @@ +/* + * Boot code and exception vectors for Book3E processors + * + * Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/threads.h> +#include <asm/reg.h> +#include <asm/page.h> +#include <asm/ppc_asm.h> +#include <asm/asm-offsets.h> +#include <asm/cputable.h> +#include <asm/setup.h> +#include <asm/thread_info.h> +#include <asm/reg_a2.h> +#include <asm/exception-64e.h> +#include <asm/bug.h> +#include <asm/irqflags.h> +#include <asm/ptrace.h> +#include <asm/ppc-opcode.h> +#include <asm/mmu.h> +#include <asm/hw_irq.h> +#include <asm/kvm_asm.h> +#include <asm/kvm_booke_hv_asm.h> +#include <asm/feature-fixups.h> + +/* XXX This will ultimately add space for a special exception save + * structure used to save things like SRR0/SRR1, SPRGs, MAS, etc... + * when taking special interrupts. For now we don't support that, + * special interrupts from within a non-standard level will probably + * blow you up + */ +#define SPECIAL_EXC_SRR0 0 +#define SPECIAL_EXC_SRR1 1 +#define SPECIAL_EXC_SPRG_GEN 2 +#define SPECIAL_EXC_SPRG_TLB 3 +#define SPECIAL_EXC_MAS0 4 +#define SPECIAL_EXC_MAS1 5 +#define SPECIAL_EXC_MAS2 6 +#define SPECIAL_EXC_MAS3 7 +#define SPECIAL_EXC_MAS6 8 +#define SPECIAL_EXC_MAS7 9 +#define SPECIAL_EXC_MAS5 10 /* E.HV only */ +#define SPECIAL_EXC_MAS8 11 /* E.HV only */ +#define SPECIAL_EXC_IRQHAPPENED 12 +#define SPECIAL_EXC_DEAR 13 +#define SPECIAL_EXC_ESR 14 +#define SPECIAL_EXC_SOFTE 15 +#define SPECIAL_EXC_CSRR0 16 +#define SPECIAL_EXC_CSRR1 17 +/* must be even to keep 16-byte stack alignment */ +#define SPECIAL_EXC_END 18 + +#define SPECIAL_EXC_FRAME_SIZE (INT_FRAME_SIZE + SPECIAL_EXC_END * 8) +#define SPECIAL_EXC_FRAME_OFFS (INT_FRAME_SIZE - 288) + +#define SPECIAL_EXC_STORE(reg, name) \ + std reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1) + +#define SPECIAL_EXC_LOAD(reg, name) \ + ld reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1) + +special_reg_save: + lbz r9,PACAIRQHAPPENED(r13) + RECONCILE_IRQ_STATE(r3,r4) + + /* + * We only need (or have stack space) to save this stuff if + * we interrupted the kernel. + */ + ld r3,_MSR(r1) + andi. r3,r3,MSR_PR + bnelr + + /* Copy info into temporary exception thread info */ + ld r11,PACAKSAVE(r13) + CURRENT_THREAD_INFO(r11, r11) + CURRENT_THREAD_INFO(r12, r1) + ld r10,TI_FLAGS(r11) + std r10,TI_FLAGS(r12) + ld r10,TI_PREEMPT(r11) + std r10,TI_PREEMPT(r12) + ld r10,TI_TASK(r11) + std r10,TI_TASK(r12) + + /* + * Advance to the next TLB exception frame for handler + * types that don't do it automatically. + */ + LOAD_REG_ADDR(r11,extlb_level_exc) + lwz r12,0(r11) + mfspr r10,SPRN_SPRG_TLB_EXFRAME + add r10,r10,r12 + mtspr SPRN_SPRG_TLB_EXFRAME,r10 + + /* + * Save registers needed to allow nesting of certain exceptions + * (such as TLB misses) inside special exception levels + */ + mfspr r10,SPRN_SRR0 + SPECIAL_EXC_STORE(r10,SRR0) + mfspr r10,SPRN_SRR1 + SPECIAL_EXC_STORE(r10,SRR1) + mfspr r10,SPRN_SPRG_GEN_SCRATCH + SPECIAL_EXC_STORE(r10,SPRG_GEN) + mfspr r10,SPRN_SPRG_TLB_SCRATCH + SPECIAL_EXC_STORE(r10,SPRG_TLB) + mfspr r10,SPRN_MAS0 + SPECIAL_EXC_STORE(r10,MAS0) + mfspr r10,SPRN_MAS1 + SPECIAL_EXC_STORE(r10,MAS1) + mfspr r10,SPRN_MAS2 + SPECIAL_EXC_STORE(r10,MAS2) + mfspr r10,SPRN_MAS3 + SPECIAL_EXC_STORE(r10,MAS3) + mfspr r10,SPRN_MAS6 + SPECIAL_EXC_STORE(r10,MAS6) + mfspr r10,SPRN_MAS7 + SPECIAL_EXC_STORE(r10,MAS7) +BEGIN_FTR_SECTION + mfspr r10,SPRN_MAS5 + SPECIAL_EXC_STORE(r10,MAS5) + mfspr r10,SPRN_MAS8 + SPECIAL_EXC_STORE(r10,MAS8) + + /* MAS5/8 could have inappropriate values if we interrupted KVM code */ + li r10,0 + mtspr SPRN_MAS5,r10 + mtspr SPRN_MAS8,r10 +END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV) + SPECIAL_EXC_STORE(r9,IRQHAPPENED) + + mfspr r10,SPRN_DEAR + SPECIAL_EXC_STORE(r10,DEAR) + mfspr r10,SPRN_ESR + SPECIAL_EXC_STORE(r10,ESR) + + lbz r10,PACAIRQSOFTMASK(r13) + SPECIAL_EXC_STORE(r10,SOFTE) + ld r10,_NIP(r1) + SPECIAL_EXC_STORE(r10,CSRR0) + ld r10,_MSR(r1) + SPECIAL_EXC_STORE(r10,CSRR1) + + blr + +ret_from_level_except: + ld r3,_MSR(r1) + andi. r3,r3,MSR_PR + beq 1f + b ret_from_except +1: + + LOAD_REG_ADDR(r11,extlb_level_exc) + lwz r12,0(r11) + mfspr r10,SPRN_SPRG_TLB_EXFRAME + sub r10,r10,r12 + mtspr SPRN_SPRG_TLB_EXFRAME,r10 + + /* + * It's possible that the special level exception interrupted a + * TLB miss handler, and inserted the same entry that the + * interrupted handler was about to insert. On CPUs without TLB + * write conditional, this can result in a duplicate TLB entry. + * Wipe all non-bolted entries to be safe. + * + * Note that this doesn't protect against any TLB misses + * we may take accessing the stack from here to the end of + * the special level exception. It's not clear how we can + * reasonably protect against that, but only CPUs with + * neither TLB write conditional nor bolted kernel memory + * are affected. Do any such CPUs even exist? + */ + PPC_TLBILX_ALL(0,R0) + + REST_NVGPRS(r1) + + SPECIAL_EXC_LOAD(r10,SRR0) + mtspr SPRN_SRR0,r10 + SPECIAL_EXC_LOAD(r10,SRR1) + mtspr SPRN_SRR1,r10 + SPECIAL_EXC_LOAD(r10,SPRG_GEN) + mtspr SPRN_SPRG_GEN_SCRATCH,r10 + SPECIAL_EXC_LOAD(r10,SPRG_TLB) + mtspr SPRN_SPRG_TLB_SCRATCH,r10 + SPECIAL_EXC_LOAD(r10,MAS0) + mtspr SPRN_MAS0,r10 + SPECIAL_EXC_LOAD(r10,MAS1) + mtspr SPRN_MAS1,r10 + SPECIAL_EXC_LOAD(r10,MAS2) + mtspr SPRN_MAS2,r10 + SPECIAL_EXC_LOAD(r10,MAS3) + mtspr SPRN_MAS3,r10 + SPECIAL_EXC_LOAD(r10,MAS6) + mtspr SPRN_MAS6,r10 + SPECIAL_EXC_LOAD(r10,MAS7) + mtspr SPRN_MAS7,r10 +BEGIN_FTR_SECTION + SPECIAL_EXC_LOAD(r10,MAS5) + mtspr SPRN_MAS5,r10 + SPECIAL_EXC_LOAD(r10,MAS8) + mtspr SPRN_MAS8,r10 +END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV) + + lbz r6,PACAIRQSOFTMASK(r13) + ld r5,SOFTE(r1) + + /* Interrupts had better not already be enabled... */ + tweqi r6,IRQS_ENABLED + + andi. r6,r5,IRQS_DISABLED + bne 1f + + TRACE_ENABLE_INTS + stb r5,PACAIRQSOFTMASK(r13) +1: + /* + * Restore PACAIRQHAPPENED rather than setting it based on + * the return MSR[EE], since we could have interrupted + * __check_irq_replay() or other inconsistent transitory + * states that must remain that way. + */ + SPECIAL_EXC_LOAD(r10,IRQHAPPENED) + stb r10,PACAIRQHAPPENED(r13) + + SPECIAL_EXC_LOAD(r10,DEAR) + mtspr SPRN_DEAR,r10 + SPECIAL_EXC_LOAD(r10,ESR) + mtspr SPRN_ESR,r10 + + stdcx. r0,0,r1 /* to clear the reservation */ + + REST_4GPRS(2, r1) + REST_4GPRS(6, r1) + + ld r10,_CTR(r1) + ld r11,_XER(r1) + mtctr r10 + mtxer r11 + + blr + +.macro ret_from_level srr0 srr1 paca_ex scratch + bl ret_from_level_except + + ld r10,_LINK(r1) + ld r11,_CCR(r1) + ld r0,GPR13(r1) + mtlr r10 + mtcr r11 + + ld r10,GPR10(r1) + ld r11,GPR11(r1) + ld r12,GPR12(r1) + mtspr \scratch,r0 + + std r10,\paca_ex+EX_R10(r13); + std r11,\paca_ex+EX_R11(r13); + ld r10,_NIP(r1) + ld r11,_MSR(r1) + ld r0,GPR0(r1) + ld r1,GPR1(r1) + mtspr \srr0,r10 + mtspr \srr1,r11 + ld r10,\paca_ex+EX_R10(r13) + ld r11,\paca_ex+EX_R11(r13) + mfspr r13,\scratch +.endm + +ret_from_crit_except: + ret_from_level SPRN_CSRR0 SPRN_CSRR1 PACA_EXCRIT SPRN_SPRG_CRIT_SCRATCH + rfci + +ret_from_mc_except: + ret_from_level SPRN_MCSRR0 SPRN_MCSRR1 PACA_EXMC SPRN_SPRG_MC_SCRATCH + rfmci + +/* Exception prolog code for all exceptions */ +#define EXCEPTION_PROLOG(n, intnum, type, addition) \ + mtspr SPRN_SPRG_##type##_SCRATCH,r13; /* get spare registers */ \ + mfspr r13,SPRN_SPRG_PACA; /* get PACA */ \ + std r10,PACA_EX##type+EX_R10(r13); \ + std r11,PACA_EX##type+EX_R11(r13); \ + mfcr r10; /* save CR */ \ + mfspr r11,SPRN_##type##_SRR1;/* what are we coming from */ \ + DO_KVM intnum,SPRN_##type##_SRR1; /* KVM hook */ \ + stw r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \ + addition; /* additional code for that exc. */ \ + std r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */ \ + type##_SET_KSTACK; /* get special stack if necessary */\ + andi. r10,r11,MSR_PR; /* save stack pointer */ \ + beq 1f; /* branch around if supervisor */ \ + ld r1,PACAKSAVE(r13); /* get kernel stack coming from usr */\ +1: type##_BTB_FLUSH \ + cmpdi cr1,r1,0; /* check if SP makes sense */ \ + bge- cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \ + mfspr r10,SPRN_##type##_SRR0; /* read SRR0 before touching stack */ + +/* Exception type-specific macros */ +#define GEN_SET_KSTACK \ + subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ +#define SPRN_GEN_SRR0 SPRN_SRR0 +#define SPRN_GEN_SRR1 SPRN_SRR1 + +#define GDBELL_SET_KSTACK GEN_SET_KSTACK +#define SPRN_GDBELL_SRR0 SPRN_GSRR0 +#define SPRN_GDBELL_SRR1 SPRN_GSRR1 + +#define CRIT_SET_KSTACK \ + ld r1,PACA_CRIT_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE +#define SPRN_CRIT_SRR0 SPRN_CSRR0 +#define SPRN_CRIT_SRR1 SPRN_CSRR1 + +#define DBG_SET_KSTACK \ + ld r1,PACA_DBG_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE +#define SPRN_DBG_SRR0 SPRN_DSRR0 +#define SPRN_DBG_SRR1 SPRN_DSRR1 + +#define MC_SET_KSTACK \ + ld r1,PACA_MC_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE +#define SPRN_MC_SRR0 SPRN_MCSRR0 +#define SPRN_MC_SRR1 SPRN_MCSRR1 + +#ifdef CONFIG_PPC_FSL_BOOK3E +#define GEN_BTB_FLUSH \ + START_BTB_FLUSH_SECTION \ + beq 1f; \ + BTB_FLUSH(r10) \ + 1: \ + END_BTB_FLUSH_SECTION + +#define CRIT_BTB_FLUSH \ + START_BTB_FLUSH_SECTION \ + BTB_FLUSH(r10) \ + END_BTB_FLUSH_SECTION + +#define DBG_BTB_FLUSH CRIT_BTB_FLUSH +#define MC_BTB_FLUSH CRIT_BTB_FLUSH +#define GDBELL_BTB_FLUSH GEN_BTB_FLUSH +#else +#define GEN_BTB_FLUSH +#define CRIT_BTB_FLUSH +#define DBG_BTB_FLUSH +#define MC_BTB_FLUSH +#define GDBELL_BTB_FLUSH +#endif + +#define NORMAL_EXCEPTION_PROLOG(n, intnum, addition) \ + EXCEPTION_PROLOG(n, intnum, GEN, addition##_GEN(n)) + +#define CRIT_EXCEPTION_PROLOG(n, intnum, addition) \ + EXCEPTION_PROLOG(n, intnum, CRIT, addition##_CRIT(n)) + +#define DBG_EXCEPTION_PROLOG(n, intnum, addition) \ + EXCEPTION_PROLOG(n, intnum, DBG, addition##_DBG(n)) + +#define MC_EXCEPTION_PROLOG(n, intnum, addition) \ + EXCEPTION_PROLOG(n, intnum, MC, addition##_MC(n)) + +#define GDBELL_EXCEPTION_PROLOG(n, intnum, addition) \ + EXCEPTION_PROLOG(n, intnum, GDBELL, addition##_GDBELL(n)) + +/* Variants of the "addition" argument for the prolog + */ +#define PROLOG_ADDITION_NONE_GEN(n) +#define PROLOG_ADDITION_NONE_GDBELL(n) +#define PROLOG_ADDITION_NONE_CRIT(n) +#define PROLOG_ADDITION_NONE_DBG(n) +#define PROLOG_ADDITION_NONE_MC(n) + +#define PROLOG_ADDITION_MASKABLE_GEN(n) \ + lbz r10,PACAIRQSOFTMASK(r13); /* are irqs soft-masked? */ \ + andi. r10,r10,IRQS_DISABLED; /* yes -> go out of line */ \ + bne masked_interrupt_book3e_##n + +#define PROLOG_ADDITION_2REGS_GEN(n) \ + std r14,PACA_EXGEN+EX_R14(r13); \ + std r15,PACA_EXGEN+EX_R15(r13) + +#define PROLOG_ADDITION_1REG_GEN(n) \ + std r14,PACA_EXGEN+EX_R14(r13); + +#define PROLOG_ADDITION_2REGS_CRIT(n) \ + std r14,PACA_EXCRIT+EX_R14(r13); \ + std r15,PACA_EXCRIT+EX_R15(r13) + +#define PROLOG_ADDITION_2REGS_DBG(n) \ + std r14,PACA_EXDBG+EX_R14(r13); \ + std r15,PACA_EXDBG+EX_R15(r13) + +#define PROLOG_ADDITION_2REGS_MC(n) \ + std r14,PACA_EXMC+EX_R14(r13); \ + std r15,PACA_EXMC+EX_R15(r13) + + +/* Core exception code for all exceptions except TLB misses. */ +#define EXCEPTION_COMMON_LVL(n, scratch, excf) \ +exc_##n##_common: \ + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + std r9,GPR9(r1); /* save r9 in stackframe */ \ + std r10,_NIP(r1); /* save SRR0 to stackframe */ \ + std r11,_MSR(r1); /* save SRR1 to stackframe */ \ + beq 2f; /* if from kernel mode */ \ + ACCOUNT_CPU_USER_ENTRY(r13,r10,r11);/* accounting (uses cr0+eq) */ \ +2: ld r3,excf+EX_R10(r13); /* get back r10 */ \ + ld r4,excf+EX_R11(r13); /* get back r11 */ \ + mfspr r5,scratch; /* get back r13 */ \ + std r12,GPR12(r1); /* save r12 in stackframe */ \ + ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ + mflr r6; /* save LR in stackframe */ \ + mfctr r7; /* save CTR in stackframe */ \ + mfspr r8,SPRN_XER; /* save XER in stackframe */ \ + ld r9,excf+EX_R1(r13); /* load orig r1 back from PACA */ \ + lwz r10,excf+EX_CR(r13); /* load orig CR back from PACA */ \ + lbz r11,PACAIRQSOFTMASK(r13); /* get current IRQ softe */ \ + ld r12,exception_marker@toc(r2); \ + li r0,0; \ + std r3,GPR10(r1); /* save r10 to stackframe */ \ + std r4,GPR11(r1); /* save r11 to stackframe */ \ + std r5,GPR13(r1); /* save it to stackframe */ \ + std r6,_LINK(r1); \ + std r7,_CTR(r1); \ + std r8,_XER(r1); \ + li r3,(n)+1; /* indicate partial regs in trap */ \ + std r9,0(r1); /* store stack frame back link */ \ + std r10,_CCR(r1); /* store orig CR in stackframe */ \ + std r9,GPR1(r1); /* store stack frame back link */ \ + std r11,SOFTE(r1); /* and save it to stackframe */ \ + std r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ \ + std r3,_TRAP(r1); /* set trap number */ \ + std r0,RESULT(r1); /* clear regs->result */ + +#define EXCEPTION_COMMON(n) \ + EXCEPTION_COMMON_LVL(n, SPRN_SPRG_GEN_SCRATCH, PACA_EXGEN) +#define EXCEPTION_COMMON_CRIT(n) \ + EXCEPTION_COMMON_LVL(n, SPRN_SPRG_CRIT_SCRATCH, PACA_EXCRIT) +#define EXCEPTION_COMMON_MC(n) \ + EXCEPTION_COMMON_LVL(n, SPRN_SPRG_MC_SCRATCH, PACA_EXMC) +#define EXCEPTION_COMMON_DBG(n) \ + EXCEPTION_COMMON_LVL(n, SPRN_SPRG_DBG_SCRATCH, PACA_EXDBG) + +/* + * This is meant for exceptions that don't immediately hard-enable. We + * set a bit in paca->irq_happened to ensure that a subsequent call to + * arch_local_irq_restore() will properly hard-enable and avoid the + * fast-path, and then reconcile irq state. + */ +#define INTS_DISABLE RECONCILE_IRQ_STATE(r3,r4) + +/* + * This is called by exceptions that don't use INTS_DISABLE (that did not + * touch irq indicators in the PACA). This will restore MSR:EE to it's + * previous value + * + * XXX In the long run, we may want to open-code it in order to separate the + * load from the wrtee, thus limiting the latency caused by the dependency + * but at this point, I'll favor code clarity until we have a near to final + * implementation + */ +#define INTS_RESTORE_HARD \ + ld r11,_MSR(r1); \ + wrtee r11; + +/* XXX FIXME: Restore r14/r15 when necessary */ +#define BAD_STACK_TRAMPOLINE(n) \ +exc_##n##_bad_stack: \ + li r1,(n); /* get exception number */ \ + sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \ + b bad_stack_book3e; /* bad stack error */ + +/* WARNING: If you change the layout of this stub, make sure you check + * the debug exception handler which handles single stepping + * into exceptions from userspace, and the MM code in + * arch/powerpc/mm/tlb_nohash.c which patches the branch here + * and would need to be updated if that branch is moved + */ +#define EXCEPTION_STUB(loc, label) \ + . = interrupt_base_book3e + loc; \ + nop; /* To make debug interrupts happy */ \ + b exc_##label##_book3e; + +#define ACK_NONE(r) +#define ACK_DEC(r) \ + lis r,TSR_DIS@h; \ + mtspr SPRN_TSR,r +#define ACK_FIT(r) \ + lis r,TSR_FIS@h; \ + mtspr SPRN_TSR,r + +/* Used by asynchronous interrupt that may happen in the idle loop. + * + * This check if the thread was in the idle loop, and if yes, returns + * to the caller rather than the PC. This is to avoid a race if + * interrupts happen before the wait instruction. + */ +#define CHECK_NAPPING() \ + CURRENT_THREAD_INFO(r11, r1); \ + ld r10,TI_LOCAL_FLAGS(r11); \ + andi. r9,r10,_TLF_NAPPING; \ + beq+ 1f; \ + ld r8,_LINK(r1); \ + rlwinm r7,r10,0,~_TLF_NAPPING; \ + std r8,_NIP(r1); \ + std r7,TI_LOCAL_FLAGS(r11); \ +1: + + +#define MASKABLE_EXCEPTION(trapnum, intnum, label, hdlr, ack) \ + START_EXCEPTION(label); \ + NORMAL_EXCEPTION_PROLOG(trapnum, intnum, PROLOG_ADDITION_MASKABLE)\ + EXCEPTION_COMMON(trapnum) \ + INTS_DISABLE; \ + ack(r8); \ + CHECK_NAPPING(); \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b ret_from_except_lite; + +/* This value is used to mark exception frames on the stack. */ + .section ".toc","aw" +exception_marker: + .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER + + +/* + * And here we have the exception vectors ! + */ + + .text + .balign 0x1000 + .globl interrupt_base_book3e +interrupt_base_book3e: /* fake trap */ + EXCEPTION_STUB(0x000, machine_check) + EXCEPTION_STUB(0x020, critical_input) /* 0x0100 */ + EXCEPTION_STUB(0x040, debug_crit) /* 0x0d00 */ + EXCEPTION_STUB(0x060, data_storage) /* 0x0300 */ + EXCEPTION_STUB(0x080, instruction_storage) /* 0x0400 */ + EXCEPTION_STUB(0x0a0, external_input) /* 0x0500 */ + EXCEPTION_STUB(0x0c0, alignment) /* 0x0600 */ + EXCEPTION_STUB(0x0e0, program) /* 0x0700 */ + EXCEPTION_STUB(0x100, fp_unavailable) /* 0x0800 */ + EXCEPTION_STUB(0x120, system_call) /* 0x0c00 */ + EXCEPTION_STUB(0x140, ap_unavailable) /* 0x0f20 */ + EXCEPTION_STUB(0x160, decrementer) /* 0x0900 */ + EXCEPTION_STUB(0x180, fixed_interval) /* 0x0980 */ + EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */ + EXCEPTION_STUB(0x1c0, data_tlb_miss) + EXCEPTION_STUB(0x1e0, instruction_tlb_miss) + EXCEPTION_STUB(0x200, altivec_unavailable) + EXCEPTION_STUB(0x220, altivec_assist) + EXCEPTION_STUB(0x260, perfmon) + EXCEPTION_STUB(0x280, doorbell) + EXCEPTION_STUB(0x2a0, doorbell_crit) + EXCEPTION_STUB(0x2c0, guest_doorbell) + EXCEPTION_STUB(0x2e0, guest_doorbell_crit) + EXCEPTION_STUB(0x300, hypercall) + EXCEPTION_STUB(0x320, ehpriv) + EXCEPTION_STUB(0x340, lrat_error) + + .globl __end_interrupts +__end_interrupts: + +/* Critical Input Interrupt */ + START_EXCEPTION(critical_input); + CRIT_EXCEPTION_PROLOG(0x100, BOOKE_INTERRUPT_CRITICAL, + PROLOG_ADDITION_NONE) + EXCEPTION_COMMON_CRIT(0x100) + bl save_nvgprs + bl special_reg_save + CHECK_NAPPING(); + addi r3,r1,STACK_FRAME_OVERHEAD + bl unknown_exception + b ret_from_crit_except + +/* Machine Check Interrupt */ + START_EXCEPTION(machine_check); + MC_EXCEPTION_PROLOG(0x000, BOOKE_INTERRUPT_MACHINE_CHECK, + PROLOG_ADDITION_NONE) + EXCEPTION_COMMON_MC(0x000) + bl save_nvgprs + bl special_reg_save + CHECK_NAPPING(); + addi r3,r1,STACK_FRAME_OVERHEAD + bl machine_check_exception + b ret_from_mc_except + +/* Data Storage Interrupt */ + START_EXCEPTION(data_storage) + NORMAL_EXCEPTION_PROLOG(0x300, BOOKE_INTERRUPT_DATA_STORAGE, + PROLOG_ADDITION_2REGS) + mfspr r14,SPRN_DEAR + mfspr r15,SPRN_ESR + EXCEPTION_COMMON(0x300) + INTS_DISABLE + b storage_fault_common + +/* Instruction Storage Interrupt */ + START_EXCEPTION(instruction_storage); + NORMAL_EXCEPTION_PROLOG(0x400, BOOKE_INTERRUPT_INST_STORAGE, + PROLOG_ADDITION_2REGS) + li r15,0 + mr r14,r10 + EXCEPTION_COMMON(0x400) + INTS_DISABLE + b storage_fault_common + +/* External Input Interrupt */ + MASKABLE_EXCEPTION(0x500, BOOKE_INTERRUPT_EXTERNAL, + external_input, do_IRQ, ACK_NONE) + +/* Alignment */ + START_EXCEPTION(alignment); + NORMAL_EXCEPTION_PROLOG(0x600, BOOKE_INTERRUPT_ALIGNMENT, + PROLOG_ADDITION_2REGS) + mfspr r14,SPRN_DEAR + mfspr r15,SPRN_ESR + EXCEPTION_COMMON(0x600) + b alignment_more /* no room, go out of line */ + +/* Program Interrupt */ + START_EXCEPTION(program); + NORMAL_EXCEPTION_PROLOG(0x700, BOOKE_INTERRUPT_PROGRAM, + PROLOG_ADDITION_1REG) + mfspr r14,SPRN_ESR + EXCEPTION_COMMON(0x700) + INTS_DISABLE + std r14,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + ld r14,PACA_EXGEN+EX_R14(r13) + bl save_nvgprs + bl program_check_exception + b ret_from_except + +/* Floating Point Unavailable Interrupt */ + START_EXCEPTION(fp_unavailable); + NORMAL_EXCEPTION_PROLOG(0x800, BOOKE_INTERRUPT_FP_UNAVAIL, + PROLOG_ADDITION_NONE) + /* we can probably do a shorter exception entry for that one... */ + EXCEPTION_COMMON(0x800) + ld r12,_MSR(r1) + andi. r0,r12,MSR_PR; + beq- 1f + bl load_up_fpu + b fast_exception_return +1: INTS_DISABLE + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl kernel_fp_unavailable_exception + b ret_from_except + +/* Altivec Unavailable Interrupt */ + START_EXCEPTION(altivec_unavailable); + NORMAL_EXCEPTION_PROLOG(0x200, BOOKE_INTERRUPT_ALTIVEC_UNAVAIL, + PROLOG_ADDITION_NONE) + /* we can probably do a shorter exception entry for that one... */ + EXCEPTION_COMMON(0x200) +#ifdef CONFIG_ALTIVEC +BEGIN_FTR_SECTION + ld r12,_MSR(r1) + andi. r0,r12,MSR_PR; + beq- 1f + bl load_up_altivec + b fast_exception_return +1: +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) +#endif + INTS_DISABLE + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl altivec_unavailable_exception + b ret_from_except + +/* AltiVec Assist */ + START_EXCEPTION(altivec_assist); + NORMAL_EXCEPTION_PROLOG(0x220, + BOOKE_INTERRUPT_ALTIVEC_ASSIST, + PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0x220) + INTS_DISABLE + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD +#ifdef CONFIG_ALTIVEC +BEGIN_FTR_SECTION + bl altivec_assist_exception +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) +#else + bl unknown_exception +#endif + b ret_from_except + + +/* Decrementer Interrupt */ + MASKABLE_EXCEPTION(0x900, BOOKE_INTERRUPT_DECREMENTER, + decrementer, timer_interrupt, ACK_DEC) + +/* Fixed Interval Timer Interrupt */ + MASKABLE_EXCEPTION(0x980, BOOKE_INTERRUPT_FIT, + fixed_interval, unknown_exception, ACK_FIT) + +/* Watchdog Timer Interrupt */ + START_EXCEPTION(watchdog); + CRIT_EXCEPTION_PROLOG(0x9f0, BOOKE_INTERRUPT_WATCHDOG, + PROLOG_ADDITION_NONE) + EXCEPTION_COMMON_CRIT(0x9f0) + bl save_nvgprs + bl special_reg_save + CHECK_NAPPING(); + addi r3,r1,STACK_FRAME_OVERHEAD +#ifdef CONFIG_BOOKE_WDT + bl WatchdogException +#else + bl unknown_exception +#endif + b ret_from_crit_except + +/* System Call Interrupt */ + START_EXCEPTION(system_call) + mr r9,r13 /* keep a copy of userland r13 */ + mfspr r11,SPRN_SRR0 /* get return address */ + mfspr r12,SPRN_SRR1 /* get previous MSR */ + mfspr r13,SPRN_SPRG_PACA /* get our PACA */ + b system_call_common + +/* Auxiliary Processor Unavailable Interrupt */ + START_EXCEPTION(ap_unavailable); + NORMAL_EXCEPTION_PROLOG(0xf20, BOOKE_INTERRUPT_AP_UNAVAIL, + PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0xf20) + INTS_DISABLE + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl unknown_exception + b ret_from_except + +/* Debug exception as a critical interrupt*/ + START_EXCEPTION(debug_crit); + CRIT_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG, + PROLOG_ADDITION_2REGS) + + /* + * If there is a single step or branch-taken exception in an + * exception entry sequence, it was probably meant to apply to + * the code where the exception occurred (since exception entry + * doesn't turn off DE automatically). We simulate the effect + * of turning off DE on entry to an exception handler by turning + * off DE in the CSRR1 value and clearing the debug status. + */ + + mfspr r14,SPRN_DBSR /* check single-step/branch taken */ + andis. r15,r14,(DBSR_IC|DBSR_BT)@h + beq+ 1f + +#ifdef CONFIG_RELOCATABLE + ld r15,PACATOC(r13) + ld r14,interrupt_base_book3e@got(r15) + ld r15,__end_interrupts@got(r15) +#else + LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) + LOAD_REG_IMMEDIATE(r15,__end_interrupts) +#endif + cmpld cr0,r10,r14 + cmpld cr1,r10,r15 + blt+ cr0,1f + bge+ cr1,1f + + /* here it looks like we got an inappropriate debug exception. */ + lis r14,(DBSR_IC|DBSR_BT)@h /* clear the event */ + rlwinm r11,r11,0,~MSR_DE /* clear DE in the CSRR1 value */ + mtspr SPRN_DBSR,r14 + mtspr SPRN_CSRR1,r11 + lwz r10,PACA_EXCRIT+EX_CR(r13) /* restore registers */ + ld r1,PACA_EXCRIT+EX_R1(r13) + ld r14,PACA_EXCRIT+EX_R14(r13) + ld r15,PACA_EXCRIT+EX_R15(r13) + mtcr r10 + ld r10,PACA_EXCRIT+EX_R10(r13) /* restore registers */ + ld r11,PACA_EXCRIT+EX_R11(r13) + mfspr r13,SPRN_SPRG_CRIT_SCRATCH + rfci + + /* Normal debug exception */ + /* XXX We only handle coming from userspace for now since we can't + * quite save properly an interrupted kernel state yet + */ +1: andi. r14,r11,MSR_PR; /* check for userspace again */ + beq kernel_dbg_exc; /* if from kernel mode */ + + /* Now we mash up things to make it look like we are coming on a + * normal exception + */ + mfspr r14,SPRN_DBSR + EXCEPTION_COMMON_CRIT(0xd00) + std r14,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + mr r4,r14 + ld r14,PACA_EXCRIT+EX_R14(r13) + ld r15,PACA_EXCRIT+EX_R15(r13) + bl save_nvgprs + bl DebugException + b ret_from_except + +kernel_dbg_exc: + b . /* NYI */ + +/* Debug exception as a debug interrupt*/ + START_EXCEPTION(debug_debug); + DBG_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG, + PROLOG_ADDITION_2REGS) + + /* + * If there is a single step or branch-taken exception in an + * exception entry sequence, it was probably meant to apply to + * the code where the exception occurred (since exception entry + * doesn't turn off DE automatically). We simulate the effect + * of turning off DE on entry to an exception handler by turning + * off DE in the DSRR1 value and clearing the debug status. + */ + + mfspr r14,SPRN_DBSR /* check single-step/branch taken */ + andis. r15,r14,(DBSR_IC|DBSR_BT)@h + beq+ 1f + +#ifdef CONFIG_RELOCATABLE + ld r15,PACATOC(r13) + ld r14,interrupt_base_book3e@got(r15) + ld r15,__end_interrupts@got(r15) +#else + LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) + LOAD_REG_IMMEDIATE(r15,__end_interrupts) +#endif + cmpld cr0,r10,r14 + cmpld cr1,r10,r15 + blt+ cr0,1f + bge+ cr1,1f + + /* here it looks like we got an inappropriate debug exception. */ + lis r14,(DBSR_IC|DBSR_BT)@h /* clear the event */ + rlwinm r11,r11,0,~MSR_DE /* clear DE in the DSRR1 value */ + mtspr SPRN_DBSR,r14 + mtspr SPRN_DSRR1,r11 + lwz r10,PACA_EXDBG+EX_CR(r13) /* restore registers */ + ld r1,PACA_EXDBG+EX_R1(r13) + ld r14,PACA_EXDBG+EX_R14(r13) + ld r15,PACA_EXDBG+EX_R15(r13) + mtcr r10 + ld r10,PACA_EXDBG+EX_R10(r13) /* restore registers */ + ld r11,PACA_EXDBG+EX_R11(r13) + mfspr r13,SPRN_SPRG_DBG_SCRATCH + rfdi + + /* Normal debug exception */ + /* XXX We only handle coming from userspace for now since we can't + * quite save properly an interrupted kernel state yet + */ +1: andi. r14,r11,MSR_PR; /* check for userspace again */ + beq kernel_dbg_exc; /* if from kernel mode */ + + /* Now we mash up things to make it look like we are coming on a + * normal exception + */ + mfspr r14,SPRN_DBSR + EXCEPTION_COMMON_DBG(0xd08) + INTS_DISABLE + std r14,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + mr r4,r14 + ld r14,PACA_EXDBG+EX_R14(r13) + ld r15,PACA_EXDBG+EX_R15(r13) + bl save_nvgprs + bl DebugException + b ret_from_except + + START_EXCEPTION(perfmon); + NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR, + PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0x260) + INTS_DISABLE + CHECK_NAPPING() + addi r3,r1,STACK_FRAME_OVERHEAD + bl performance_monitor_exception + b ret_from_except_lite + +/* Doorbell interrupt */ + MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL, + doorbell, doorbell_exception, ACK_NONE) + +/* Doorbell critical Interrupt */ + START_EXCEPTION(doorbell_crit); + CRIT_EXCEPTION_PROLOG(0x2a0, BOOKE_INTERRUPT_DOORBELL_CRITICAL, + PROLOG_ADDITION_NONE) + EXCEPTION_COMMON_CRIT(0x2a0) + bl save_nvgprs + bl special_reg_save + CHECK_NAPPING(); + addi r3,r1,STACK_FRAME_OVERHEAD + bl unknown_exception + b ret_from_crit_except + +/* + * Guest doorbell interrupt + * This general exception use GSRRx save/restore registers + */ + START_EXCEPTION(guest_doorbell); + GDBELL_EXCEPTION_PROLOG(0x2c0, BOOKE_INTERRUPT_GUEST_DBELL, + PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0x2c0) + addi r3,r1,STACK_FRAME_OVERHEAD + bl save_nvgprs + INTS_RESTORE_HARD + bl unknown_exception + b ret_from_except + +/* Guest Doorbell critical Interrupt */ + START_EXCEPTION(guest_doorbell_crit); + CRIT_EXCEPTION_PROLOG(0x2e0, BOOKE_INTERRUPT_GUEST_DBELL_CRIT, + PROLOG_ADDITION_NONE) + EXCEPTION_COMMON_CRIT(0x2e0) + bl save_nvgprs + bl special_reg_save + CHECK_NAPPING(); + addi r3,r1,STACK_FRAME_OVERHEAD + bl unknown_exception + b ret_from_crit_except + +/* Hypervisor call */ + START_EXCEPTION(hypercall); + NORMAL_EXCEPTION_PROLOG(0x310, BOOKE_INTERRUPT_HV_SYSCALL, + PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0x310) + addi r3,r1,STACK_FRAME_OVERHEAD + bl save_nvgprs + INTS_RESTORE_HARD + bl unknown_exception + b ret_from_except + +/* Embedded Hypervisor priviledged */ + START_EXCEPTION(ehpriv); + NORMAL_EXCEPTION_PROLOG(0x320, BOOKE_INTERRUPT_HV_PRIV, + PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0x320) + addi r3,r1,STACK_FRAME_OVERHEAD + bl save_nvgprs + INTS_RESTORE_HARD + bl unknown_exception + b ret_from_except + +/* LRAT Error interrupt */ + START_EXCEPTION(lrat_error); + NORMAL_EXCEPTION_PROLOG(0x340, BOOKE_INTERRUPT_LRAT_ERROR, + PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0x340) + addi r3,r1,STACK_FRAME_OVERHEAD + bl save_nvgprs + INTS_RESTORE_HARD + bl unknown_exception + b ret_from_except + +/* + * An interrupt came in while soft-disabled; We mark paca->irq_happened + * accordingly and if the interrupt is level sensitive, we hard disable + * hard disable (full_mask) corresponds to PACA_IRQ_MUST_HARD_MASK, so + * keep these in synch. + */ + +.macro masked_interrupt_book3e paca_irq full_mask + lbz r10,PACAIRQHAPPENED(r13) + .if \full_mask == 1 + ori r10,r10,\paca_irq | PACA_IRQ_HARD_DIS + .else + ori r10,r10,\paca_irq + .endif + stb r10,PACAIRQHAPPENED(r13) + + .if \full_mask == 1 + rldicl r10,r11,48,1 /* clear MSR_EE */ + rotldi r11,r10,16 + mtspr SPRN_SRR1,r11 + .endif + + lwz r11,PACA_EXGEN+EX_CR(r13) + mtcr r11 + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + mfspr r13,SPRN_SPRG_GEN_SCRATCH + rfi + b . +.endm + +masked_interrupt_book3e_0x500: + // XXX When adding support for EPR, use PACA_IRQ_EE_EDGE + masked_interrupt_book3e PACA_IRQ_EE 1 + +masked_interrupt_book3e_0x900: + ACK_DEC(r10); + masked_interrupt_book3e PACA_IRQ_DEC 0 + +masked_interrupt_book3e_0x980: + ACK_FIT(r10); + masked_interrupt_book3e PACA_IRQ_DEC 0 + +masked_interrupt_book3e_0x280: +masked_interrupt_book3e_0x2c0: + masked_interrupt_book3e PACA_IRQ_DBELL 0 + +/* + * Called from arch_local_irq_enable when an interrupt needs + * to be resent. r3 contains either 0x500,0x900,0x260 or 0x280 + * to indicate the kind of interrupt. MSR:EE is already off. + * We generate a stackframe like if a real interrupt had happened. + * + * Note: While MSR:EE is off, we need to make sure that _MSR + * in the generated frame has EE set to 1 or the exception + * handler will not properly re-enable them. + */ +_GLOBAL(__replay_interrupt) + /* We are going to jump to the exception common code which + * will retrieve various register values from the PACA which + * we don't give a damn about. + */ + mflr r10 + mfmsr r11 + mfcr r4 + mtspr SPRN_SPRG_GEN_SCRATCH,r13; + std r1,PACA_EXGEN+EX_R1(r13); + stw r4,PACA_EXGEN+EX_CR(r13); + ori r11,r11,MSR_EE + subi r1,r1,INT_FRAME_SIZE; + cmpwi cr0,r3,0x500 + beq exc_0x500_common + cmpwi cr0,r3,0x900 + beq exc_0x900_common + cmpwi cr0,r3,0x280 + beq exc_0x280_common + blr + + +/* + * This is called from 0x300 and 0x400 handlers after the prologs with + * r14 and r15 containing the fault address and error code, with the + * original values stashed away in the PACA + */ +storage_fault_common: + std r14,_DAR(r1) + std r15,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + mr r4,r14 + mr r5,r15 + ld r14,PACA_EXGEN+EX_R14(r13) + ld r15,PACA_EXGEN+EX_R15(r13) + bl do_page_fault + cmpdi r3,0 + bne- 1f + b ret_from_except_lite +1: bl save_nvgprs + mr r5,r3 + addi r3,r1,STACK_FRAME_OVERHEAD + ld r4,_DAR(r1) + bl bad_page_fault + b ret_from_except + +/* + * Alignment exception doesn't fit entirely in the 0x100 bytes so it + * continues here. + */ +alignment_more: + std r14,_DAR(r1) + std r15,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + ld r14,PACA_EXGEN+EX_R14(r13) + ld r15,PACA_EXGEN+EX_R15(r13) + bl save_nvgprs + INTS_RESTORE_HARD + bl alignment_exception + b ret_from_except + +/* + * We branch here from entry_64.S for the last stage of the exception + * return code path. MSR:EE is expected to be off at that point + */ +_GLOBAL(exception_return_book3e) + b 1f + +/* This is the return from load_up_fpu fast path which could do with + * less GPR restores in fact, but for now we have a single return path + */ + .globl fast_exception_return +fast_exception_return: + wrteei 0 +1: mr r0,r13 + ld r10,_MSR(r1) + REST_4GPRS(2, r1) + andi. r6,r10,MSR_PR + REST_2GPRS(6, r1) + beq 1f + ACCOUNT_CPU_USER_EXIT(r13, r10, r11) + ld r0,GPR13(r1) + +1: stdcx. r0,0,r1 /* to clear the reservation */ + + ld r8,_CCR(r1) + ld r9,_LINK(r1) + ld r10,_CTR(r1) + ld r11,_XER(r1) + mtcr r8 + mtlr r9 + mtctr r10 + mtxer r11 + REST_2GPRS(8, r1) + ld r10,GPR10(r1) + ld r11,GPR11(r1) + ld r12,GPR12(r1) + mtspr SPRN_SPRG_GEN_SCRATCH,r0 + + std r10,PACA_EXGEN+EX_R10(r13); + std r11,PACA_EXGEN+EX_R11(r13); + ld r10,_NIP(r1) + ld r11,_MSR(r1) + ld r0,GPR0(r1) + ld r1,GPR1(r1) + mtspr SPRN_SRR0,r10 + mtspr SPRN_SRR1,r11 + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + mfspr r13,SPRN_SPRG_GEN_SCRATCH + rfi + +/* + * Trampolines used when spotting a bad kernel stack pointer in + * the exception entry code. + * + * TODO: move some bits like SRR0 read to trampoline, pass PACA + * index around, etc... to handle crit & mcheck + */ +BAD_STACK_TRAMPOLINE(0x000) +BAD_STACK_TRAMPOLINE(0x100) +BAD_STACK_TRAMPOLINE(0x200) +BAD_STACK_TRAMPOLINE(0x220) +BAD_STACK_TRAMPOLINE(0x260) +BAD_STACK_TRAMPOLINE(0x280) +BAD_STACK_TRAMPOLINE(0x2a0) +BAD_STACK_TRAMPOLINE(0x2c0) +BAD_STACK_TRAMPOLINE(0x2e0) +BAD_STACK_TRAMPOLINE(0x300) +BAD_STACK_TRAMPOLINE(0x310) +BAD_STACK_TRAMPOLINE(0x320) +BAD_STACK_TRAMPOLINE(0x340) +BAD_STACK_TRAMPOLINE(0x400) +BAD_STACK_TRAMPOLINE(0x500) +BAD_STACK_TRAMPOLINE(0x600) +BAD_STACK_TRAMPOLINE(0x700) +BAD_STACK_TRAMPOLINE(0x800) +BAD_STACK_TRAMPOLINE(0x900) +BAD_STACK_TRAMPOLINE(0x980) +BAD_STACK_TRAMPOLINE(0x9f0) +BAD_STACK_TRAMPOLINE(0xa00) +BAD_STACK_TRAMPOLINE(0xb00) +BAD_STACK_TRAMPOLINE(0xc00) +BAD_STACK_TRAMPOLINE(0xd00) +BAD_STACK_TRAMPOLINE(0xd08) +BAD_STACK_TRAMPOLINE(0xe00) +BAD_STACK_TRAMPOLINE(0xf00) +BAD_STACK_TRAMPOLINE(0xf20) + + .globl bad_stack_book3e +bad_stack_book3e: + /* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */ + mfspr r10,SPRN_SRR0; /* read SRR0 before touching stack */ + ld r1,PACAEMERGSP(r13) + subi r1,r1,64+INT_FRAME_SIZE + std r10,_NIP(r1) + std r11,_MSR(r1) + ld r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */ + lwz r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */ + std r10,GPR1(r1) + std r11,_CCR(r1) + mfspr r10,SPRN_DEAR + mfspr r11,SPRN_ESR + std r10,_DAR(r1) + std r11,_DSISR(r1) + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + std r9,GPR9(r1); /* save r9 in stackframe */ \ + ld r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */ \ + ld r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */ \ + mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \ + std r3,GPR10(r1); /* save r10 to stackframe */ \ + std r4,GPR11(r1); /* save r11 to stackframe */ \ + std r12,GPR12(r1); /* save r12 in stackframe */ \ + std r5,GPR13(r1); /* save it to stackframe */ \ + mflr r10 + mfctr r11 + mfxer r12 + std r10,_LINK(r1) + std r11,_CTR(r1) + std r12,_XER(r1) + SAVE_10GPRS(14,r1) + SAVE_8GPRS(24,r1) + lhz r12,PACA_TRAP_SAVE(r13) + std r12,_TRAP(r1) + addi r11,r1,INT_FRAME_SIZE + std r11,0(r1) + li r12,0 + std r12,0(r11) + ld r2,PACATOC(r13) +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl kernel_bad_stack + b 1b + +/* + * Setup the initial TLB for a core. This current implementation + * assume that whatever we are running off will not conflict with + * the new mapping at PAGE_OFFSET. + */ +_GLOBAL(initial_tlb_book3e) + + /* Look for the first TLB with IPROT set */ + mfspr r4,SPRN_TLB0CFG + andi. r3,r4,TLBnCFG_IPROT + lis r3,MAS0_TLBSEL(0)@h + bne found_iprot + + mfspr r4,SPRN_TLB1CFG + andi. r3,r4,TLBnCFG_IPROT + lis r3,MAS0_TLBSEL(1)@h + bne found_iprot + + mfspr r4,SPRN_TLB2CFG + andi. r3,r4,TLBnCFG_IPROT + lis r3,MAS0_TLBSEL(2)@h + bne found_iprot + + lis r3,MAS0_TLBSEL(3)@h + mfspr r4,SPRN_TLB3CFG + /* fall through */ + +found_iprot: + andi. r5,r4,TLBnCFG_HES + bne have_hes + + mflr r8 /* save LR */ +/* 1. Find the index of the entry we're executing in + * + * r3 = MAS0_TLBSEL (for the iprot array) + * r4 = SPRN_TLBnCFG + */ + bl invstr /* Find our address */ +invstr: mflr r6 /* Make it accessible */ + mfmsr r7 + rlwinm r5,r7,27,31,31 /* extract MSR[IS] */ + mfspr r7,SPRN_PID + slwi r7,r7,16 + or r7,r7,r5 + mtspr SPRN_MAS6,r7 + tlbsx 0,r6 /* search MSR[IS], SPID=PID */ + + mfspr r3,SPRN_MAS0 + rlwinm r5,r3,16,20,31 /* Extract MAS0(Entry) */ + + mfspr r7,SPRN_MAS1 /* Insure IPROT set */ + oris r7,r7,MAS1_IPROT@h + mtspr SPRN_MAS1,r7 + tlbwe + +/* 2. Invalidate all entries except the entry we're executing in + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in + * r4 = SPRN_TLBnCFG + * r5 = ESEL of entry we are running in + */ + andi. r4,r4,TLBnCFG_N_ENTRY /* Extract # entries */ + li r6,0 /* Set Entry counter to 0 */ +1: mr r7,r3 /* Set MAS0(TLBSEL) */ + rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */ + mtspr SPRN_MAS0,r7 + tlbre + mfspr r7,SPRN_MAS1 + rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */ + cmpw r5,r6 + beq skpinv /* Dont update the current execution TLB */ + mtspr SPRN_MAS1,r7 + tlbwe + isync +skpinv: addi r6,r6,1 /* Increment */ + cmpw r6,r4 /* Are we done? */ + bne 1b /* If not, repeat */ + + /* Invalidate all TLBs */ + PPC_TLBILX_ALL(0,R0) + sync + isync + +/* 3. Setup a temp mapping and jump to it + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in + * r5 = ESEL of entry we are running in + */ + andi. r7,r5,0x1 /* Find an entry not used and is non-zero */ + addi r7,r7,0x1 + mr r4,r3 /* Set MAS0(TLBSEL) = 1 */ + mtspr SPRN_MAS0,r4 + tlbre + + rlwimi r4,r7,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r7) */ + mtspr SPRN_MAS0,r4 + + mfspr r7,SPRN_MAS1 + xori r6,r7,MAS1_TS /* Setup TMP mapping in the other Address space */ + mtspr SPRN_MAS1,r6 + + tlbwe + + mfmsr r6 + xori r6,r6,MSR_IS + mtspr SPRN_SRR1,r6 + bl 1f /* Find our address */ +1: mflr r6 + addi r6,r6,(2f - 1b) + mtspr SPRN_SRR0,r6 + rfi +2: + +/* 4. Clear out PIDs & Search info + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + * r5 = MAS3 + */ + li r6,0 + mtspr SPRN_MAS6,r6 + mtspr SPRN_PID,r6 + +/* 5. Invalidate mapping we started in + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + * r5 = MAS3 + */ + mtspr SPRN_MAS0,r3 + tlbre + mfspr r6,SPRN_MAS1 + rlwinm r6,r6,0,2,31 /* clear IPROT and VALID */ + mtspr SPRN_MAS1,r6 + tlbwe + sync + isync + +/* + * The mapping only needs to be cache-coherent on SMP, except on + * Freescale e500mc derivatives where it's also needed for coherent DMA. + */ +#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC) +#define M_IF_NEEDED MAS2_M +#else +#define M_IF_NEEDED 0 +#endif + +/* 6. Setup KERNELBASE mapping in TLB[0] + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + * r5 = MAS3 + */ + rlwinm r3,r3,0,16,3 /* clear ESEL */ + mtspr SPRN_MAS0,r3 + lis r6,(MAS1_VALID|MAS1_IPROT)@h + ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l + mtspr SPRN_MAS1,r6 + + LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_NEEDED) + mtspr SPRN_MAS2,r6 + + rlwinm r5,r5,0,0,25 + ori r5,r5,MAS3_SR | MAS3_SW | MAS3_SX + mtspr SPRN_MAS3,r5 + li r5,-1 + rlwinm r5,r5,0,0,25 + + tlbwe + +/* 7. Jump to KERNELBASE mapping + * + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + */ + /* Now we branch the new virtual address mapped by this entry */ + bl 1f /* Find our address */ +1: mflr r6 + addi r6,r6,(2f - 1b) + tovirt(r6,r6) + lis r7,MSR_KERNEL@h + ori r7,r7,MSR_KERNEL@l + mtspr SPRN_SRR0,r6 + mtspr SPRN_SRR1,r7 + rfi /* start execution out of TLB1[0] entry */ +2: + +/* 8. Clear out the temp mapping + * + * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in + */ + mtspr SPRN_MAS0,r4 + tlbre + mfspr r5,SPRN_MAS1 + rlwinm r5,r5,0,2,31 /* clear IPROT and VALID */ + mtspr SPRN_MAS1,r5 + tlbwe + sync + isync + + /* We translate LR and return */ + tovirt(r8,r8) + mtlr r8 + blr + +have_hes: + /* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the + * kernel linear mapping. We also set MAS8 once for all here though + * that will have to be made dependent on whether we are running under + * a hypervisor I suppose. + */ + + /* BEWARE, MAGIC + * This code is called as an ordinary function on the boot CPU. But to + * avoid duplication, this code is also used in SCOM bringup of + * secondary CPUs. We read the code between the initial_tlb_code_start + * and initial_tlb_code_end labels one instruction at a time and RAM it + * into the new core via SCOM. That doesn't process branches, so there + * must be none between those two labels. It also means if this code + * ever takes any parameters, the SCOM code must also be updated to + * provide them. + */ + .globl a2_tlbinit_code_start +a2_tlbinit_code_start: + + ori r11,r3,MAS0_WQ_ALLWAYS + oris r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */ + mtspr SPRN_MAS0,r11 + lis r3,(MAS1_VALID | MAS1_IPROT)@h + ori r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT + mtspr SPRN_MAS1,r3 + LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M) + mtspr SPRN_MAS2,r3 + li r3,MAS3_SR | MAS3_SW | MAS3_SX + mtspr SPRN_MAS7_MAS3,r3 + li r3,0 + mtspr SPRN_MAS8,r3 + + /* Write the TLB entry */ + tlbwe + + .globl a2_tlbinit_after_linear_map +a2_tlbinit_after_linear_map: + + /* Now we branch the new virtual address mapped by this entry */ + LOAD_REG_IMMEDIATE(r3,1f) + mtctr r3 + bctr + +1: /* We are now running at PAGE_OFFSET, clean the TLB of everything + * else (including IPROTed things left by firmware) + * r4 = TLBnCFG + * r3 = current address (more or less) + */ + + li r5,0 + mtspr SPRN_MAS6,r5 + tlbsx 0,r3 + + rlwinm r9,r4,0,TLBnCFG_N_ENTRY + rlwinm r10,r4,8,0xff + addi r10,r10,-1 /* Get inner loop mask */ + + li r3,1 + + mfspr r5,SPRN_MAS1 + rlwinm r5,r5,0,(~(MAS1_VALID|MAS1_IPROT)) + + mfspr r6,SPRN_MAS2 + rldicr r6,r6,0,51 /* Extract EPN */ + + mfspr r7,SPRN_MAS0 + rlwinm r7,r7,0,0xffff0fff /* Clear HES and WQ */ + + rlwinm r8,r7,16,0xfff /* Extract ESEL */ + +2: add r4,r3,r8 + and r4,r4,r10 + + rlwimi r7,r4,16,MAS0_ESEL_MASK + + mtspr SPRN_MAS0,r7 + mtspr SPRN_MAS1,r5 + mtspr SPRN_MAS2,r6 + tlbwe + + addi r3,r3,1 + and. r4,r3,r10 + + bne 3f + addis r6,r6,(1<<30)@h +3: + cmpw r3,r9 + blt 2b + + .globl a2_tlbinit_after_iprot_flush +a2_tlbinit_after_iprot_flush: + + PPC_TLBILX(0,0,R0) + sync + isync + + .globl a2_tlbinit_code_end +a2_tlbinit_code_end: + + /* We translate LR and return */ + mflr r3 + tovirt(r3,r3) + mtlr r3 + blr + +/* + * Main entry (boot CPU, thread 0) + * + * We enter here from head_64.S, possibly after the prom_init trampoline + * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits + * mode. Anything else is as it was left by the bootloader + * + * Initial requirements of this port: + * + * - Kernel loaded at 0 physical + * - A good lump of memory mapped 0:0 by UTLB entry 0 + * - MSR:IS & MSR:DS set to 0 + * + * Note that some of the above requirements will be relaxed in the future + * as the kernel becomes smarter at dealing with different initial conditions + * but for now you have to be careful + */ +_GLOBAL(start_initialization_book3e) + mflr r28 + + /* First, we need to setup some initial TLBs to map the kernel + * text, data and bss at PAGE_OFFSET. We don't have a real mode + * and always use AS 0, so we just set it up to match our link + * address and never use 0 based addresses. + */ + bl initial_tlb_book3e + + /* Init global core bits */ + bl init_core_book3e + + /* Init per-thread bits */ + bl init_thread_book3e + + /* Return to common init code */ + tovirt(r28,r28) + mtlr r28 + blr + + +/* + * Secondary core/processor entry + * + * This is entered for thread 0 of a secondary core, all other threads + * are expected to be stopped. It's similar to start_initialization_book3e + * except that it's generally entered from the holding loop in head_64.S + * after CPUs have been gathered by Open Firmware. + * + * We assume we are in 32 bits mode running with whatever TLB entry was + * set for us by the firmware or POR engine. + */ +_GLOBAL(book3e_secondary_core_init_tlb_set) + li r4,1 + b generic_secondary_smp_init + +_GLOBAL(book3e_secondary_core_init) + mflr r28 + + /* Do we need to setup initial TLB entry ? */ + cmplwi r4,0 + bne 2f + + /* Setup TLB for this core */ + bl initial_tlb_book3e + + /* We can return from the above running at a different + * address, so recalculate r2 (TOC) + */ + bl relative_toc + + /* Init global core bits */ +2: bl init_core_book3e + + /* Init per-thread bits */ +3: bl init_thread_book3e + + /* Return to common init code at proper virtual address. + * + * Due to various previous assumptions, we know we entered this + * function at either the final PAGE_OFFSET mapping or using a + * 1:1 mapping at 0, so we don't bother doing a complicated check + * here, we just ensure the return address has the right top bits. + * + * Note that if we ever want to be smarter about where we can be + * started from, we have to be careful that by the time we reach + * the code below we may already be running at a different location + * than the one we were called from since initial_tlb_book3e can + * have moved us already. + */ + cmpdi cr0,r28,0 + blt 1f + lis r3,PAGE_OFFSET@highest + sldi r3,r3,32 + or r28,r28,r3 +1: mtlr r28 + blr + +_GLOBAL(book3e_secondary_thread_init) + mflr r28 + b 3b + + .globl init_core_book3e +init_core_book3e: + /* Establish the interrupt vector base */ + tovirt(r2,r2) + LOAD_REG_ADDR(r3, interrupt_base_book3e) + mtspr SPRN_IVPR,r3 + sync + blr + +init_thread_book3e: + lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h + mtspr SPRN_EPCR,r3 + + /* Make sure interrupts are off */ + wrteei 0 + + /* disable all timers and clear out status */ + li r3,0 + mtspr SPRN_TCR,r3 + mfspr r3,SPRN_TSR + mtspr SPRN_TSR,r3 + + blr + +_GLOBAL(__setup_base_ivors) + SET_IVOR(0, 0x020) /* Critical Input */ + SET_IVOR(1, 0x000) /* Machine Check */ + SET_IVOR(2, 0x060) /* Data Storage */ + SET_IVOR(3, 0x080) /* Instruction Storage */ + SET_IVOR(4, 0x0a0) /* External Input */ + SET_IVOR(5, 0x0c0) /* Alignment */ + SET_IVOR(6, 0x0e0) /* Program */ + SET_IVOR(7, 0x100) /* FP Unavailable */ + SET_IVOR(8, 0x120) /* System Call */ + SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */ + SET_IVOR(10, 0x160) /* Decrementer */ + SET_IVOR(11, 0x180) /* Fixed Interval Timer */ + SET_IVOR(12, 0x1a0) /* Watchdog Timer */ + SET_IVOR(13, 0x1c0) /* Data TLB Error */ + SET_IVOR(14, 0x1e0) /* Instruction TLB Error */ + SET_IVOR(15, 0x040) /* Debug */ + + sync + + blr + +_GLOBAL(setup_altivec_ivors) + SET_IVOR(32, 0x200) /* AltiVec Unavailable */ + SET_IVOR(33, 0x220) /* AltiVec Assist */ + blr + +_GLOBAL(setup_perfmon_ivor) + SET_IVOR(35, 0x260) /* Performance Monitor */ + blr + +_GLOBAL(setup_doorbell_ivors) + SET_IVOR(36, 0x280) /* Processor Doorbell */ + SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */ + blr + +_GLOBAL(setup_ehv_ivors) + SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */ + SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */ + SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */ + SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */ + blr + +_GLOBAL(setup_lrat_ivor) + SET_IVOR(42, 0x340) /* LRAT Error */ + blr |