diff options
Diffstat (limited to 'arch/powerpc/platforms/52xx/lite5200.c')
| -rw-r--r-- | arch/powerpc/platforms/52xx/lite5200.c | 198 |
1 files changed, 198 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c new file mode 100644 index 000000000..c94c385cc --- /dev/null +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -0,0 +1,198 @@ +/* + * Freescale Lite5200 board support + * + * Written by: Grant Likely <grant.likely@secretlab.ca> + * + * Copyright (C) Secret Lab Technologies Ltd. 2006. All rights reserved. + * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Description: + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#undef DEBUG + +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/mpc52xx.h> + +/* ************************************************************************ + * + * Setup the architecture + * + */ + +/* mpc5200 device tree match tables */ +static const struct of_device_id mpc5200_cdm_ids[] __initconst = { + { .compatible = "fsl,mpc5200-cdm", }, + { .compatible = "mpc5200-cdm", }, + {} +}; + +static const struct of_device_id mpc5200_gpio_ids[] __initconst = { + { .compatible = "fsl,mpc5200-gpio", }, + { .compatible = "mpc5200-gpio", }, + {} +}; + +/* + * Fix clock configuration. + * + * Firmware is supposed to be responsible for this. If you are creating a + * new board port, do *NOT* duplicate this code. Fix your boot firmware + * to set it correctly in the first place + */ +static void __init +lite5200_fix_clock_config(void) +{ + struct device_node *np; + struct mpc52xx_cdm __iomem *cdm; + /* Map zones */ + np = of_find_matching_node(NULL, mpc5200_cdm_ids); + cdm = of_iomap(np, 0); + of_node_put(np); + if (!cdm) { + printk(KERN_ERR "%s() failed; expect abnormal behaviour\n", + __func__); + return; + } + + /* Use internal 48 Mhz */ + out_8(&cdm->ext_48mhz_en, 0x00); + out_8(&cdm->fd_enable, 0x01); + if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */ + out_be16(&cdm->fd_counters, 0x0001); + else + out_be16(&cdm->fd_counters, 0x5555); + + /* Unmap the regs */ + iounmap(cdm); +} + +/* + * Fix setting of port_config register. + * + * Firmware is supposed to be responsible for this. If you are creating a + * new board port, do *NOT* duplicate this code. Fix your boot firmware + * to set it correctly in the first place + */ +static void __init +lite5200_fix_port_config(void) +{ + struct device_node *np; + struct mpc52xx_gpio __iomem *gpio; + u32 port_config; + + np = of_find_matching_node(NULL, mpc5200_gpio_ids); + gpio = of_iomap(np, 0); + of_node_put(np); + if (!gpio) { + printk(KERN_ERR "%s() failed. expect abnormal behavior\n", + __func__); + return; + } + + /* Set port config */ + port_config = in_be32(&gpio->port_config); + + port_config &= ~0x00800000; /* 48Mhz internal, pin is GPIO */ + + port_config &= ~0x00007000; /* USB port : Differential mode */ + port_config |= 0x00001000; /* USB 1 only */ + + port_config &= ~0x03000000; /* ATA CS is on csb_4/5 */ + port_config |= 0x01000000; + + pr_debug("port_config: old:%x new:%x\n", + in_be32(&gpio->port_config), port_config); + out_be32(&gpio->port_config, port_config); + + /* Unmap zone */ + iounmap(gpio); +} + +#ifdef CONFIG_PM +static void lite5200_suspend_prepare(void __iomem *mbar) +{ + u8 pin = 1; /* GPIO_WKUP_1 (GPIO_PSC2_4) */ + u8 level = 0; /* wakeup on low level */ + mpc52xx_set_wakeup_gpio(pin, level); + + /* + * power down usb port + * this needs to be called before of-ohci suspend code + */ + + /* set ports to "power switched" and "powered at the same time" + * USB Rh descriptor A: NPS = 0, PSM = 0 */ + out_be32(mbar + 0x1048, in_be32(mbar + 0x1048) & ~0x300); + /* USB Rh status: LPS = 1 - turn off power */ + out_be32(mbar + 0x1050, 0x00000001); +} + +static void lite5200_resume_finish(void __iomem *mbar) +{ + /* USB Rh status: LPSC = 1 - turn on power */ + out_be32(mbar + 0x1050, 0x00010000); +} +#endif + +static void __init lite5200_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("lite5200_setup_arch()", 0); + + /* Map important registers from the internal memory map */ + mpc52xx_map_common_devices(); + + /* Some mpc5200 & mpc5200b related configuration */ + mpc5200_setup_xlb_arbiter(); + + /* Fix things that firmware should have done. */ + lite5200_fix_clock_config(); + lite5200_fix_port_config(); + +#ifdef CONFIG_PM + mpc52xx_suspend.board_suspend_prepare = lite5200_suspend_prepare; + mpc52xx_suspend.board_resume_finish = lite5200_resume_finish; + lite5200_pm_init(); +#endif + + mpc52xx_setup_pci(); +} + +static const char * const board[] __initconst = { + "fsl,lite5200", + "fsl,lite5200b", + NULL, +}; + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init lite5200_probe(void) +{ + return of_device_compatible_match(of_root, board); +} + +define_machine(lite5200) { + .name = "lite5200", + .probe = lite5200_probe, + .setup_arch = lite5200_setup_arch, + .init = mpc52xx_declare_of_platform_devices, + .init_IRQ = mpc52xx_init_irq, + .get_irq = mpc52xx_get_irq, + .restart = mpc52xx_restart, + .calibrate_decr = generic_calibrate_decr, +}; |