diff options
Diffstat (limited to 'arch/powerpc/platforms/8xx')
| -rw-r--r-- | arch/powerpc/platforms/8xx/Kconfig | 167 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/Makefile | 10 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/adder875.c | 115 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/ep88xc.c | 174 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/m8xx_setup.c | 238 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/machine_check.c | 37 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/mpc86xads.h | 47 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/mpc86xads_setup.c | 150 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/mpc885ads.h | 49 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/mpc885ads_setup.c | 224 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/mpc8xx.h | 21 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/pic.c | 163 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/pic.h | 19 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/tqm8xx_setup.c | 152 |
14 files changed, 1566 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig new file mode 100644 index 000000000..d408162d5 --- /dev/null +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: GPL-2.0 +config CPM1 + bool + select CPM + +choice + prompt "8xx Machine Type" + depends on PPC_8xx + default MPC885ADS + +config MPC8XXFADS + bool "FADS" + +config MPC86XADS + bool "MPC86XADS" + select CPM1 + help + MPC86x Application Development System by Freescale Semiconductor. + The MPC86xADS is meant to serve as a platform for s/w and h/w + development around the MPC86X processor families. + +config MPC885ADS + bool "MPC885ADS" + select CPM1 + select OF_DYNAMIC + help + Freescale Semiconductor MPC885 Application Development System (ADS). + Also known as DUET. + The MPC885ADS is meant to serve as a platform for s/w and h/w + development around the MPC885 processor family. + +config PPC_EP88XC + bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)" + select CPM1 + help + This enables support for the Embedded Planet EP88xC board. + + This board is also resold by Freescale as the QUICCStart + MPC885 Evaluation System and/or the CWH-PPC-885XN-VE. + +config PPC_ADDER875 + bool "Analogue & Micro Adder 875" + select CPM1 + help + This enables support for the Analogue & Micro Adder 875 + board. + +config TQM8XX + bool "TQM8XX" + select CPM1 + help + support for the mpc8xx based boards from TQM. + +endchoice + +menu "Freescale Ethernet driver platform-specific options" + depends on (FS_ENET && MPC885ADS) + + config MPC8xx_SECOND_ETH + bool "Second Ethernet channel" + depends on MPC885ADS + default y + help + This enables support for second Ethernet on MPC885ADS and MPC86xADS boards. + The latter will use SCC1, for 885ADS you can select it below. + + choice + prompt "Second Ethernet channel" + depends on MPC8xx_SECOND_ETH + default MPC8xx_SECOND_ETH_FEC2 + + config MPC8xx_SECOND_ETH_FEC2 + bool "FEC2" + depends on MPC885ADS + help + Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2 + (often 2-nd UART) will not work if this is enabled. + + config MPC8xx_SECOND_ETH_SCC3 + bool "SCC3" + depends on MPC885ADS + help + Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1 + (often 1-nd UART) will not work if this is enabled. + + endchoice + +endmenu + +# +# MPC8xx Communication options +# + +menu "MPC8xx CPM Options" + depends on PPC_8xx + +# This doesn't really belong here, but it is convenient to ask +# 8xx specific questions. +comment "Generic MPC8xx Options" + +config 8xx_COPYBACK + bool "Copy-Back Data Cache (else Writethrough)" + help + Saying Y here will cause the cache on an MPC8xx processor to be used + in Copy-Back mode. If you say N here, it is used in Writethrough + mode. + + If in doubt, say Y here. + +config 8xx_GPIO + bool "GPIO API Support" + select GPIOLIB + help + Saying Y here will cause the ports on an MPC8xx processor to be used + with the GPIO API. If you say N here, the kernel needs less memory. + + If in doubt, say Y here. + +config 8xx_CPU15 + bool "CPU15 Silicon Errata" + depends on !HUGETLB_PAGE + default y + help + This enables a workaround for erratum CPU15 on MPC8xx chips. + This bug can cause incorrect code execution under certain + circumstances. This workaround adds some overhead (a TLB miss + every time execution crosses a page boundary), and you may wish + to disable it if you have worked around the bug in the compiler + (by not placing conditional branches or branches to LR or CTR + in the last word of a page, with a target of the last cache + line in the next page), or if you have used some other + workaround. + + If in doubt, say Y here. + +choice + prompt "Microcode patch selection" + default NO_UCODE_PATCH + help + Help not implemented yet, coming soon. + +config NO_UCODE_PATCH + bool "None" + +config USB_SOF_UCODE_PATCH + bool "USB SOF patch" + help + Help not implemented yet, coming soon. + +config I2C_SPI_UCODE_PATCH + bool "I2C/SPI relocation patch" + help + Help not implemented yet, coming soon. + +config I2C_SPI_SMC1_UCODE_PATCH + bool "I2C/SPI/SMC1 relocation patch" + help + Help not implemented yet, coming soon. + +endchoice + +config UCODE_PATCH + bool + default y + depends on !NO_UCODE_PATCH + +endmenu diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile new file mode 100644 index 000000000..708ab099e --- /dev/null +++ b/arch/powerpc/platforms/8xx/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the PowerPC 8xx linux kernel. +# +obj-y += m8xx_setup.o machine_check.o pic.o +obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o +obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o +obj-$(CONFIG_PPC_EP88XC) += ep88xc.o +obj-$(CONFIG_PPC_ADDER875) += adder875.o +obj-$(CONFIG_TQM8XX) += tqm8xx_setup.o diff --git a/arch/powerpc/platforms/8xx/adder875.c b/arch/powerpc/platforms/8xx/adder875.c new file mode 100644 index 000000000..bcef9f661 --- /dev/null +++ b/arch/powerpc/platforms/8xx/adder875.c @@ -0,0 +1,115 @@ +/* Analogue & Micro Adder MPC875 board support + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/fs_enet_pd.h> +#include <linux/of_platform.h> + +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/cpm1.h> +#include <asm/fs_pd.h> +#include <asm/udbg.h> +#include <asm/prom.h> + +#include "mpc8xx.h" + +struct cpm_pin { + int port, pin, flags; +}; + +static __initdata struct cpm_pin adder875_pins[] = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* MII1 */ + {CPM_PORTA, 0, CPM_PIN_INPUT}, + {CPM_PORTA, 1, CPM_PIN_INPUT}, + {CPM_PORTA, 2, CPM_PIN_INPUT}, + {CPM_PORTA, 3, CPM_PIN_INPUT}, + {CPM_PORTA, 4, CPM_PIN_OUTPUT}, + {CPM_PORTA, 10, CPM_PIN_OUTPUT}, + {CPM_PORTA, 11, CPM_PIN_OUTPUT}, + {CPM_PORTB, 19, CPM_PIN_INPUT}, + {CPM_PORTB, 31, CPM_PIN_INPUT}, + {CPM_PORTC, 12, CPM_PIN_INPUT}, + {CPM_PORTC, 13, CPM_PIN_INPUT}, + {CPM_PORTE, 30, CPM_PIN_OUTPUT}, + {CPM_PORTE, 31, CPM_PIN_OUTPUT}, + + /* MII2 */ + {CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 16, CPM_PIN_OUTPUT}, + {CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 21, CPM_PIN_OUTPUT}, + {CPM_PORTE, 22, CPM_PIN_OUTPUT}, + {CPM_PORTE, 23, CPM_PIN_OUTPUT}, + {CPM_PORTE, 24, CPM_PIN_OUTPUT}, + {CPM_PORTE, 25, CPM_PIN_OUTPUT}, + {CPM_PORTE, 26, CPM_PIN_OUTPUT}, + {CPM_PORTE, 27, CPM_PIN_OUTPUT}, + {CPM_PORTE, 28, CPM_PIN_OUTPUT}, + {CPM_PORTE, 29, CPM_PIN_OUTPUT}, +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(adder875_pins); i++) { + const struct cpm_pin *pin = &adder875_pins[i]; + cpm1_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + + /* Set FEC1 and FEC2 to MII mode */ + clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180); +} + +static void __init adder875_setup(void) +{ + cpm_reset(); + init_ioports(); +} + +static int __init adder875_probe(void) +{ + return of_machine_is_compatible("analogue-and-micro,adder875"); +} + +static const struct of_device_id of_bus_ids[] __initconst = { + { .compatible = "simple-bus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; +} +machine_device_initcall(adder875, declare_of_platform_devices); + +define_machine(adder875) { + .name = "Adder MPC875", + .probe = adder875_probe, + .setup_arch = adder875_setup, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/8xx/ep88xc.c b/arch/powerpc/platforms/8xx/ep88xc.c new file mode 100644 index 000000000..ebcf34a14 --- /dev/null +++ b/arch/powerpc/platforms/8xx/ep88xc.c @@ -0,0 +1,174 @@ +/* + * Platform setup for the Embedded Planet EP88xC board + * + * Author: Scott Wood <scottwood@freescale.com> + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/io.h> +#include <asm/udbg.h> +#include <asm/cpm1.h> + +#include "mpc8xx.h" + +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin ep88xc_pins[] = { + /* SMC1 */ + {1, 24, CPM_PIN_INPUT}, /* RX */ + {1, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SCC2 */ + {0, 12, CPM_PIN_INPUT}, /* TX */ + {0, 13, CPM_PIN_INPUT}, /* RX */ + {2, 8, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CD */ + {2, 9, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CTS */ + {2, 14, CPM_PIN_INPUT}, /* RTS */ + + /* MII1 */ + {0, 0, CPM_PIN_INPUT}, + {0, 1, CPM_PIN_INPUT}, + {0, 2, CPM_PIN_INPUT}, + {0, 3, CPM_PIN_INPUT}, + {0, 4, CPM_PIN_OUTPUT}, + {0, 10, CPM_PIN_OUTPUT}, + {0, 11, CPM_PIN_OUTPUT}, + {1, 19, CPM_PIN_INPUT}, + {1, 31, CPM_PIN_INPUT}, + {2, 12, CPM_PIN_INPUT}, + {2, 13, CPM_PIN_INPUT}, + {3, 8, CPM_PIN_INPUT}, + {4, 30, CPM_PIN_OUTPUT}, + {4, 31, CPM_PIN_OUTPUT}, + + /* MII2 */ + {4, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 16, CPM_PIN_OUTPUT}, + {4, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 21, CPM_PIN_OUTPUT}, + {4, 22, CPM_PIN_OUTPUT}, + {4, 23, CPM_PIN_OUTPUT}, + {4, 24, CPM_PIN_OUTPUT}, + {4, 25, CPM_PIN_OUTPUT}, + {4, 26, CPM_PIN_OUTPUT}, + {4, 27, CPM_PIN_OUTPUT}, + {4, 28, CPM_PIN_OUTPUT}, + {4, 29, CPM_PIN_OUTPUT}, + + /* USB */ + {0, 6, CPM_PIN_INPUT}, /* CLK2 */ + {0, 14, CPM_PIN_INPUT}, /* USBOE */ + {0, 15, CPM_PIN_INPUT}, /* USBRXD */ + {2, 6, CPM_PIN_OUTPUT}, /* USBTXN */ + {2, 7, CPM_PIN_OUTPUT}, /* USBTXP */ + {2, 10, CPM_PIN_INPUT}, /* USBRXN */ + {2, 11, CPM_PIN_INPUT}, /* USBRXP */ + + /* Misc */ + {1, 26, CPM_PIN_INPUT}, /* BRGO2 */ + {1, 27, CPM_PIN_INPUT}, /* BRGO1 */ +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ep88xc_pins); i++) { + struct cpm_pin *pin = &ep88xc_pins[i]; + cpm1_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_TX); /* USB */ + cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_RX); + cpm1_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX); + cpm1_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX); +} + +static u8 __iomem *ep88xc_bcsr; + +#define BCSR7_SCC2_ENABLE 0x10 + +#define BCSR8_PHY1_ENABLE 0x80 +#define BCSR8_PHY1_POWER 0x40 +#define BCSR8_PHY2_ENABLE 0x20 +#define BCSR8_PHY2_POWER 0x10 + +#define BCSR9_USB_ENABLE 0x80 +#define BCSR9_USB_POWER 0x40 +#define BCSR9_USB_HOST 0x20 +#define BCSR9_USB_FULL_SPEED_TARGET 0x10 + +static void __init ep88xc_setup_arch(void) +{ + struct device_node *np; + + cpm_reset(); + init_ioports(); + + np = of_find_compatible_node(NULL, NULL, "fsl,ep88xc-bcsr"); + if (!np) { + printk(KERN_CRIT "Could not find fsl,ep88xc-bcsr node\n"); + return; + } + + ep88xc_bcsr = of_iomap(np, 0); + of_node_put(np); + + if (!ep88xc_bcsr) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } + + setbits8(&ep88xc_bcsr[7], BCSR7_SCC2_ENABLE); + setbits8(&ep88xc_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER | + BCSR8_PHY2_ENABLE | BCSR8_PHY2_POWER); +} + +static int __init ep88xc_probe(void) +{ + return of_machine_is_compatible("fsl,ep88xc"); +} + +static const struct of_device_id of_bus_ids[] __initconst = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + /* Publish the QE devices */ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(ep88xc, declare_of_platform_devices); + +define_machine(ep88xc) { + .name = "Embedded Planet EP88xC", + .probe = ep88xc_probe, + .setup_arch = ep88xc_setup_arch, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c new file mode 100644 index 000000000..027c42d89 --- /dev/null +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + * Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net) + * Further modified for generic 8xx by Dan. + */ + +/* + * bootup setup stuff.. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/time.h> +#include <linux/rtc.h> +#include <linux/fsl_devices.h> + +#include <asm/io.h> +#include <asm/8xx_immap.h> +#include <asm/prom.h> +#include <asm/fs_pd.h> +#include <mm/mmu_decl.h> + +#include "pic.h" + +#include "mpc8xx.h" + +extern int cpm_pic_init(void); +extern int cpm_get_irq(void); + +/* A place holder for time base interrupts, if they are ever enabled. */ +static irqreturn_t timebase_interrupt(int irq, void *dev) +{ + printk ("timebase_interrupt()\n"); + + return IRQ_HANDLED; +} + +static struct irqaction tbint_irqaction = { + .handler = timebase_interrupt, + .flags = IRQF_NO_THREAD, + .name = "tbint", +}; + +/* per-board overridable init_internal_rtc() function. */ +void __init __attribute__ ((weak)) +init_internal_rtc(void) +{ + sit8xx_t __iomem *sys_tmr = immr_map(im_sit); + + /* Disable the RTC one second and alarm interrupts. */ + clrbits16(&sys_tmr->sit_rtcsc, (RTCSC_SIE | RTCSC_ALE)); + + /* Enable the RTC */ + setbits16(&sys_tmr->sit_rtcsc, (RTCSC_RTF | RTCSC_RTE)); + immr_unmap(sys_tmr); +} + +static int __init get_freq(char *name, unsigned long *val) +{ + struct device_node *cpu; + const unsigned int *fp; + int found = 0; + + /* The cpu node should have timebase and clock frequency properties */ + cpu = of_find_node_by_type(NULL, "cpu"); + + if (cpu) { + fp = of_get_property(cpu, name, NULL); + if (fp) { + found = 1; + *val = *fp; + } + + of_node_put(cpu); + } + + return found; +} + +/* The decrementer counts at the system (internal) clock frequency divided by + * sixteen, or external oscillator divided by four. We force the processor + * to use system clock divided by sixteen. + */ +void __init mpc8xx_calibrate_decr(void) +{ + struct device_node *cpu; + cark8xx_t __iomem *clk_r1; + car8xx_t __iomem *clk_r2; + sitk8xx_t __iomem *sys_tmr1; + sit8xx_t __iomem *sys_tmr2; + int irq, virq; + + clk_r1 = immr_map(im_clkrstk); + + /* Unlock the SCCR. */ + out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY); + out_be32(&clk_r1->cark_sccrk, KAPWR_KEY); + immr_unmap(clk_r1); + + /* Force all 8xx processors to use divide by 16 processor clock. */ + clk_r2 = immr_map(im_clkrst); + setbits32(&clk_r2->car_sccr, 0x02000000); + immr_unmap(clk_r2); + + /* Processor frequency is MHz. + */ + ppc_proc_freq = 50000000; + if (!get_freq("clock-frequency", &ppc_proc_freq)) + printk(KERN_ERR "WARNING: Estimating processor frequency " + "(not found)\n"); + + ppc_tb_freq = ppc_proc_freq / 16; + printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); + + /* Perform some more timer/timebase initialization. This used + * to be done elsewhere, but other changes caused it to get + * called more than once....that is a bad thing. + * + * First, unlock all of the registers we are going to modify. + * To protect them from corruption during power down, registers + * that are maintained by keep alive power are "locked". To + * modify these registers we have to write the key value to + * the key location associated with the register. + * Some boards power up with these unlocked, while others + * are locked. Writing anything (including the unlock code?) + * to the unlocked registers will lock them again. So, here + * we guarantee the registers are locked, then we unlock them + * for our use. + */ + sys_tmr1 = immr_map(im_sitk); + out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY); + out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY); + out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY); + out_be32(&sys_tmr1->sitk_tbscrk, KAPWR_KEY); + out_be32(&sys_tmr1->sitk_rtcsck, KAPWR_KEY); + out_be32(&sys_tmr1->sitk_tbk, KAPWR_KEY); + immr_unmap(sys_tmr1); + + init_internal_rtc(); + + /* Enabling the decrementer also enables the timebase interrupts + * (or from the other point of view, to get decrementer interrupts + * we have to enable the timebase). The decrementer interrupt + * is wired into the vector table, nothing to do here for that. + */ + cpu = of_find_node_by_type(NULL, "cpu"); + virq= irq_of_parse_and_map(cpu, 0); + irq = virq_to_hw(virq); + + sys_tmr2 = immr_map(im_sit); + out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) | + (TBSCR_TBF | TBSCR_TBE)); + immr_unmap(sys_tmr2); + + if (setup_irq(virq, &tbint_irqaction)) + panic("Could not allocate timer IRQ!"); +} + +/* The RTC on the MPC8xx is an internal register. + * We want to protect this during power down, so we need to unlock, + * modify, and re-lock. + */ + +int mpc8xx_set_rtc_time(struct rtc_time *tm) +{ + sitk8xx_t __iomem *sys_tmr1; + sit8xx_t __iomem *sys_tmr2; + time64_t time; + + sys_tmr1 = immr_map(im_sitk); + sys_tmr2 = immr_map(im_sit); + time = rtc_tm_to_time64(tm); + + out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY); + out_be32(&sys_tmr2->sit_rtc, (u32)time); + out_be32(&sys_tmr1->sitk_rtck, ~KAPWR_KEY); + + immr_unmap(sys_tmr2); + immr_unmap(sys_tmr1); + return 0; +} + +void mpc8xx_get_rtc_time(struct rtc_time *tm) +{ + unsigned long data; + sit8xx_t __iomem *sys_tmr = immr_map(im_sit); + + /* Get time from the RTC. */ + data = in_be32(&sys_tmr->sit_rtc); + rtc_time64_to_tm(data, tm); + immr_unmap(sys_tmr); + return; +} + +void __noreturn mpc8xx_restart(char *cmd) +{ + car8xx_t __iomem *clk_r = immr_map(im_clkrst); + + + local_irq_disable(); + + setbits32(&clk_r->car_plprcr, 0x00000080); + /* Clear the ME bit in MSR to cause checkstop on machine check + */ + mtmsr(mfmsr() & ~0x1000); + + in_8(&clk_r->res[0]); + panic("Restart failed\n"); +} + +static void cpm_cascade(struct irq_desc *desc) +{ + generic_handle_irq(cpm_get_irq()); +} + +/* Initialize the internal interrupt controllers. The number of + * interrupts supported can vary with the processor type, and the + * 82xx family can have up to 64. + * External interrupts can be either edge or level triggered, and + * need to be initialized by the appropriate driver. + */ +void __init mpc8xx_pics_init(void) +{ + int irq; + + if (mpc8xx_pic_init()) { + printk(KERN_ERR "Failed interrupt 8xx controller initialization\n"); + return; + } + + irq = cpm_pic_init(); + if (irq) + irq_set_chained_handler(irq, cpm_cascade); +} diff --git a/arch/powerpc/platforms/8xx/machine_check.c b/arch/powerpc/platforms/8xx/machine_check.c new file mode 100644 index 000000000..402016705 --- /dev/null +++ b/arch/powerpc/platforms/8xx/machine_check.c @@ -0,0 +1,37 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/printk.h> +#include <linux/ptrace.h> + +#include <asm/reg.h> + +int machine_check_8xx(struct pt_regs *regs) +{ + unsigned long reason = regs->msr; + + pr_err("Machine check in kernel mode.\n"); + pr_err("Caused by (from SRR1=%lx): ", reason); + if (reason & 0x40000000) + pr_err("Fetch error at address %lx\n", regs->nip); + else + pr_err("Data access error at address %lx\n", regs->dar); + +#ifdef CONFIG_PCI + /* the qspan pci read routines can cause machine checks -- Cort + * + * yuck !!! that totally needs to go away ! There are better ways + * to deal with that than having a wart in the mcheck handler. + * -- BenH + */ + bad_page_fault(regs, regs->dar, SIGBUS); + return 1; +#else + return 0; +#endif +} diff --git a/arch/powerpc/platforms/8xx/mpc86xads.h b/arch/powerpc/platforms/8xx/mpc86xads.h new file mode 100644 index 000000000..17b1fe75e --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc86xads.h @@ -0,0 +1,47 @@ +/* + * A collection of structures, addresses, and values associated with + * the Freescale MPC86xADS board. + * Copied from the FADS stuff. + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_MPC86XADS_H__ +#define __ASM_MPC86XADS_H__ + +/* Bits of interest in the BCSRs. + */ +#define BCSR1_ETHEN ((uint)0x20000000) +#define BCSR1_IRDAEN ((uint)0x10000000) +#define BCSR1_RS232EN_1 ((uint)0x01000000) +#define BCSR1_PCCEN ((uint)0x00800000) +#define BCSR1_PCCVCC0 ((uint)0x00400000) +#define BCSR1_PCCVPP0 ((uint)0x00200000) +#define BCSR1_PCCVPP1 ((uint)0x00100000) +#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) +#define BCSR1_RS232EN_2 ((uint)0x00040000) +#define BCSR1_PCCVCC1 ((uint)0x00010000) +#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) + +#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/ +#define BCSR4_USB_LO_SPD ((uint)0x04000000) +#define BCSR4_USB_VCC ((uint)0x02000000) +#define BCSR4_USB_FULL_SPD ((uint)0x00040000) +#define BCSR4_USB_EN ((uint)0x00020000) + +#define BCSR5_MII2_EN 0x40 +#define BCSR5_MII2_RST 0x20 +#define BCSR5_T1_RST 0x10 +#define BCSR5_ATM155_RST 0x08 +#define BCSR5_ATM25_RST 0x04 +#define BCSR5_MII1_EN 0x02 +#define BCSR5_MII1_RST 0x01 + +#endif /* __ASM_MPC86XADS_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c new file mode 100644 index 000000000..8d02f5ff4 --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c @@ -0,0 +1,150 @@ +/*arch/powerpc/platforms/8xx/mpc86xads_setup.c + * + * Platform setup for the Freescale mpc86xads board + * + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * Copyright 2005 MontaVista Software Inc. + * + * Heavily modified by Scott Wood <scottwood@freescale.com> + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> + +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/time.h> +#include <asm/8xx_immap.h> +#include <asm/cpm1.h> +#include <asm/fs_pd.h> +#include <asm/udbg.h> + +#include "mpc86xads.h" +#include "mpc8xx.h" + +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin mpc866ads_pins[] = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SMC2 */ + {CPM_PORTB, 21, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SCC1 */ + {CPM_PORTA, 6, CPM_PIN_INPUT}, /* CLK1 */ + {CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */ + {CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */ + {CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 19, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */ + {CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */ + {CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */ + + /* MII */ + {CPM_PORTD, 3, CPM_PIN_OUTPUT}, + {CPM_PORTD, 4, CPM_PIN_OUTPUT}, + {CPM_PORTD, 5, CPM_PIN_OUTPUT}, + {CPM_PORTD, 6, CPM_PIN_OUTPUT}, + {CPM_PORTD, 7, CPM_PIN_OUTPUT}, + {CPM_PORTD, 8, CPM_PIN_OUTPUT}, + {CPM_PORTD, 9, CPM_PIN_OUTPUT}, + {CPM_PORTD, 10, CPM_PIN_OUTPUT}, + {CPM_PORTD, 11, CPM_PIN_OUTPUT}, + {CPM_PORTD, 12, CPM_PIN_OUTPUT}, + {CPM_PORTD, 13, CPM_PIN_OUTPUT}, + {CPM_PORTD, 14, CPM_PIN_OUTPUT}, + {CPM_PORTD, 15, CPM_PIN_OUTPUT}, + + /* I2C */ + {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, + {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mpc866ads_pins); i++) { + struct cpm_pin *pin = &mpc866ads_pins[i]; + cpm1_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK1, CPM_CLK_TX); + cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_RX); + + /* Set FEC1 and FEC2 to MII mode */ + clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180); +} + +static void __init mpc86xads_setup_arch(void) +{ + struct device_node *np; + u32 __iomem *bcsr_io; + + cpm_reset(); + init_ioports(); + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc866ads-bcsr"); + if (!np) { + printk(KERN_CRIT "Could not find fsl,mpc866ads-bcsr node\n"); + return; + } + + bcsr_io = of_iomap(np, 0); + of_node_put(np); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } + + clrbits32(bcsr_io, BCSR1_RS232EN_1 | BCSR1_RS232EN_2 | BCSR1_ETHEN); + iounmap(bcsr_io); +} + +static int __init mpc86xads_probe(void) +{ + return of_machine_is_compatible("fsl,mpc866ads"); +} + +static const struct of_device_id of_bus_ids[] __initconst = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(mpc86x_ads, declare_of_platform_devices); + +define_machine(mpc86x_ads) { + .name = "MPC86x ADS", + .probe = mpc86xads_probe, + .setup_arch = mpc86xads_setup_arch, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .set_rtc_time = mpc8xx_set_rtc_time, + .get_rtc_time = mpc8xx_get_rtc_time, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h new file mode 100644 index 000000000..19412f76f --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc885ads.h @@ -0,0 +1,49 @@ +/* + * A collection of structures, addresses, and values associated with + * the Freescale MPC885ADS board. + * Copied from the FADS stuff. + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_MPC885ADS_H__ +#define __ASM_MPC885ADS_H__ + +#include <sysdev/fsl_soc.h> + +/* Bits of interest in the BCSRs. + */ +#define BCSR1_ETHEN ((uint)0x20000000) +#define BCSR1_IRDAEN ((uint)0x10000000) +#define BCSR1_RS232EN_1 ((uint)0x01000000) +#define BCSR1_PCCEN ((uint)0x00800000) +#define BCSR1_PCCVCC0 ((uint)0x00400000) +#define BCSR1_PCCVPP0 ((uint)0x00200000) +#define BCSR1_PCCVPP1 ((uint)0x00100000) +#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) +#define BCSR1_RS232EN_2 ((uint)0x00040000) +#define BCSR1_PCCVCC1 ((uint)0x00010000) +#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) + +#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/ +#define BCSR4_USB_LO_SPD ((uint)0x04000000) +#define BCSR4_USB_VCC ((uint)0x02000000) +#define BCSR4_USB_FULL_SPD ((uint)0x00040000) +#define BCSR4_USB_EN ((uint)0x00020000) + +#define BCSR5_MII2_EN 0x40 +#define BCSR5_MII2_RST 0x20 +#define BCSR5_T1_RST 0x10 +#define BCSR5_ATM155_RST 0x08 +#define BCSR5_ATM25_RST 0x04 +#define BCSR5_MII1_EN 0x02 +#define BCSR5_MII1_RST 0x01 + +#endif /* __ASM_MPC885ADS_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c new file mode 100644 index 000000000..a0c83c190 --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c @@ -0,0 +1,224 @@ +/* + * Platform setup for the Freescale mpc885ads board + * + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * Copyright 2005 MontaVista Software Inc. + * + * Heavily modified by Scott Wood <scottwood@freescale.com> + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/device.h> +#include <linux/delay.h> + +#include <linux/fs_enet_pd.h> +#include <linux/fs_uart_pd.h> +#include <linux/fsl_devices.h> +#include <linux/mii.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> + +#include <asm/delay.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/page.h> +#include <asm/processor.h> +#include <asm/time.h> +#include <asm/8xx_immap.h> +#include <asm/cpm1.h> +#include <asm/fs_pd.h> +#include <asm/udbg.h> + +#include "mpc885ads.h" +#include "mpc8xx.h" + +static u32 __iomem *bcsr, *bcsr5; + +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin mpc885ads_pins[] = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SMC2 */ +#ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2 + {CPM_PORTE, 21, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ +#endif + + /* SCC3 */ + {CPM_PORTA, 9, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTA, 8, CPM_PIN_INPUT}, /* TX */ + {CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */ + {CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */ + {CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */ + {CPM_PORTE, 17, CPM_PIN_INPUT}, /* CLK5 */ + {CPM_PORTE, 16, CPM_PIN_INPUT}, /* CLK6 */ + + /* MII1 */ + {CPM_PORTA, 0, CPM_PIN_INPUT}, + {CPM_PORTA, 1, CPM_PIN_INPUT}, + {CPM_PORTA, 2, CPM_PIN_INPUT}, + {CPM_PORTA, 3, CPM_PIN_INPUT}, + {CPM_PORTA, 4, CPM_PIN_OUTPUT}, + {CPM_PORTA, 10, CPM_PIN_OUTPUT}, + {CPM_PORTA, 11, CPM_PIN_OUTPUT}, + {CPM_PORTB, 19, CPM_PIN_INPUT}, + {CPM_PORTB, 31, CPM_PIN_INPUT}, + {CPM_PORTC, 12, CPM_PIN_INPUT}, + {CPM_PORTC, 13, CPM_PIN_INPUT}, + {CPM_PORTE, 30, CPM_PIN_OUTPUT}, + {CPM_PORTE, 31, CPM_PIN_OUTPUT}, + + /* MII2 */ +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 + {CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 16, CPM_PIN_OUTPUT}, + {CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 21, CPM_PIN_OUTPUT}, + {CPM_PORTE, 22, CPM_PIN_OUTPUT}, + {CPM_PORTE, 23, CPM_PIN_OUTPUT}, + {CPM_PORTE, 24, CPM_PIN_OUTPUT}, + {CPM_PORTE, 25, CPM_PIN_OUTPUT}, + {CPM_PORTE, 26, CPM_PIN_OUTPUT}, + {CPM_PORTE, 27, CPM_PIN_OUTPUT}, + {CPM_PORTE, 28, CPM_PIN_OUTPUT}, + {CPM_PORTE, 29, CPM_PIN_OUTPUT}, +#endif + /* I2C */ + {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, + {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) { + struct cpm_pin *pin = &mpc885ads_pins[i]; + cpm1_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX); + cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX); + + /* Set FEC1 and FEC2 to MII mode */ + clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180); +} + +static void __init mpc885ads_setup_arch(void) +{ + struct device_node *np; + + cpm_reset(); + init_ioports(); + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr"); + if (!np) { + printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n"); + return; + } + + bcsr = of_iomap(np, 0); + bcsr5 = of_iomap(np, 1); + of_node_put(np); + + if (!bcsr || !bcsr5) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } + + clrbits32(&bcsr[1], BCSR1_RS232EN_1); +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 + setbits32(&bcsr[1], BCSR1_RS232EN_2); +#else + clrbits32(&bcsr[1], BCSR1_RS232EN_2); +#endif + + clrbits32(bcsr5, BCSR5_MII1_EN); + setbits32(bcsr5, BCSR5_MII1_RST); + udelay(1000); + clrbits32(bcsr5, BCSR5_MII1_RST); + +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 + clrbits32(bcsr5, BCSR5_MII2_EN); + setbits32(bcsr5, BCSR5_MII2_RST); + udelay(1000); + clrbits32(bcsr5, BCSR5_MII2_RST); +#else + setbits32(bcsr5, BCSR5_MII2_EN); +#endif + +#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 + clrbits32(&bcsr[4], BCSR4_ETH10_RST); + udelay(1000); + setbits32(&bcsr[4], BCSR4_ETH10_RST); + + setbits32(&bcsr[1], BCSR1_ETHEN); + + np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80"); +#else + np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40"); +#endif + + /* The SCC3 enet registers overlap the SMC1 registers, so + * one of the two must be removed from the device tree. + */ + + if (np) { + of_detach_node(np); + of_node_put(np); + } +} + +static int __init mpc885ads_probe(void) +{ + return of_machine_is_compatible("fsl,mpc885ads"); +} + +static const struct of_device_id of_bus_ids[] __initconst = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + /* Publish the QE devices */ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(mpc885_ads, declare_of_platform_devices); + +define_machine(mpc885_ads) { + .name = "Freescale MPC885 ADS", + .probe = mpc885ads_probe, + .setup_arch = mpc885ads_setup_arch, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/8xx/mpc8xx.h b/arch/powerpc/platforms/8xx/mpc8xx.h new file mode 100644 index 000000000..31cc2ecac --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc8xx.h @@ -0,0 +1,21 @@ +/* + * Prototypes, etc. for the Freescale MPC8xx embedded cpu chips + * May need to be cleaned as the port goes on ... + * + * Copyright (C) 2008 Jochen Friedrich <jochen@scram.de> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef __MPC8xx_H +#define __MPC8xx_H + +extern void __noreturn mpc8xx_restart(char *cmd); +extern void mpc8xx_calibrate_decr(void); +extern int mpc8xx_set_rtc_time(struct rtc_time *tm); +extern void mpc8xx_get_rtc_time(struct rtc_time *tm); +extern void mpc8xx_pics_init(void); +extern unsigned int mpc8xx_get_irq(void); + +#endif /* __MPC8xx_H */ diff --git a/arch/powerpc/platforms/8xx/pic.c b/arch/powerpc/platforms/8xx/pic.c new file mode 100644 index 000000000..8d5a25d43 --- /dev/null +++ b/arch/powerpc/platforms/8xx/pic.c @@ -0,0 +1,163 @@ +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/irq.h> +#include <linux/dma-mapping.h> +#include <asm/prom.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/8xx_immap.h> + +#include "pic.h" + + +#define PIC_VEC_SPURRIOUS 15 + +extern int cpm_get_irq(struct pt_regs *regs); + +static struct irq_domain *mpc8xx_pic_host; +static unsigned long mpc8xx_cached_irq_mask; +static sysconf8xx_t __iomem *siu_reg; + +static inline unsigned long mpc8xx_irqd_to_bit(struct irq_data *d) +{ + return 0x80000000 >> irqd_to_hwirq(d); +} + +static void mpc8xx_unmask_irq(struct irq_data *d) +{ + mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); +} + +static void mpc8xx_mask_irq(struct irq_data *d) +{ + mpc8xx_cached_irq_mask &= ~mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); +} + +static void mpc8xx_ack(struct irq_data *d) +{ + out_be32(&siu_reg->sc_sipend, mpc8xx_irqd_to_bit(d)); +} + +static void mpc8xx_end_irq(struct irq_data *d) +{ + mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); +} + +static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type) +{ + /* only external IRQ senses are programmable */ + if ((flow_type & IRQ_TYPE_EDGE_FALLING) && !(irqd_to_hwirq(d) & 1)) { + unsigned int siel = in_be32(&siu_reg->sc_siel); + siel |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_siel, siel); + irq_set_handler_locked(d, handle_edge_irq); + } + return 0; +} + +static struct irq_chip mpc8xx_pic = { + .name = "8XX SIU", + .irq_unmask = mpc8xx_unmask_irq, + .irq_mask = mpc8xx_mask_irq, + .irq_ack = mpc8xx_ack, + .irq_eoi = mpc8xx_end_irq, + .irq_set_type = mpc8xx_set_irq_type, +}; + +unsigned int mpc8xx_get_irq(void) +{ + int irq; + + /* For MPC8xx, read the SIVEC register and shift the bits down + * to get the irq number. + */ + irq = in_be32(&siu_reg->sc_sivec) >> 26; + + if (irq == PIC_VEC_SPURRIOUS) + return 0; + + return irq_linear_revmap(mpc8xx_pic_host, irq); + +} + +static int mpc8xx_pic_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + pr_debug("mpc8xx_pic_host_map(%d, 0x%lx)\n", virq, hw); + + /* Set default irq handle */ + irq_set_chip_and_handler(virq, &mpc8xx_pic, handle_level_irq); + return 0; +} + + +static int mpc8xx_pic_host_xlate(struct irq_domain *h, struct device_node *ct, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + static unsigned char map_pic_senses[4] = { + IRQ_TYPE_EDGE_RISING, + IRQ_TYPE_LEVEL_LOW, + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_EDGE_FALLING, + }; + + if (intspec[0] > 0x1f) + return 0; + + *out_hwirq = intspec[0]; + if (intsize > 1 && intspec[1] < 4) + *out_flags = map_pic_senses[intspec[1]]; + else + *out_flags = IRQ_TYPE_NONE; + + return 0; +} + + +static const struct irq_domain_ops mpc8xx_pic_host_ops = { + .map = mpc8xx_pic_host_map, + .xlate = mpc8xx_pic_host_xlate, +}; + +int mpc8xx_pic_init(void) +{ + struct resource res; + struct device_node *np; + int ret; + + np = of_find_compatible_node(NULL, NULL, "fsl,pq1-pic"); + if (np == NULL) + np = of_find_node_by_type(NULL, "mpc8xx-pic"); + if (np == NULL) { + printk(KERN_ERR "Could not find fsl,pq1-pic node\n"); + return -ENOMEM; + } + + ret = of_address_to_resource(np, 0, &res); + if (ret) + goto out; + + siu_reg = ioremap(res.start, resource_size(&res)); + if (siu_reg == NULL) { + ret = -EINVAL; + goto out; + } + + mpc8xx_pic_host = irq_domain_add_linear(np, 64, &mpc8xx_pic_host_ops, NULL); + if (mpc8xx_pic_host == NULL) { + printk(KERN_ERR "MPC8xx PIC: failed to allocate irq host!\n"); + ret = -ENOMEM; + goto out; + } + return 0; + +out: + of_node_put(np); + return ret; +} diff --git a/arch/powerpc/platforms/8xx/pic.h b/arch/powerpc/platforms/8xx/pic.h new file mode 100644 index 000000000..9fe00eebd --- /dev/null +++ b/arch/powerpc/platforms/8xx/pic.h @@ -0,0 +1,19 @@ +#ifndef _PPC_KERNEL_MPC8xx_H +#define _PPC_KERNEL_MPC8xx_H + +#include <linux/irq.h> +#include <linux/interrupt.h> + +int mpc8xx_pic_init(void); +unsigned int mpc8xx_get_irq(void); + +/* + * Some internal interrupt registers use an 8-bit mask for the interrupt + * level instead of a number. + */ +static inline uint mk_int_int_mask(uint mask) +{ + return (1 << (7 - (mask/2))); +} + +#endif /* _PPC_KERNEL_PPC8xx_H */ diff --git a/arch/powerpc/platforms/8xx/tqm8xx_setup.c b/arch/powerpc/platforms/8xx/tqm8xx_setup.c new file mode 100644 index 000000000..4cea8b1af --- /dev/null +++ b/arch/powerpc/platforms/8xx/tqm8xx_setup.c @@ -0,0 +1,152 @@ +/* + * Platform setup for the MPC8xx based boards from TQM. + * + * Heiko Schocher <hs@denx.de> + * Copyright 2010 DENX Software Engineering GmbH + * + * based on: + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * Copyright 2005 MontaVista Software Inc. + * + * Heavily modified by Scott Wood <scottwood@freescale.com> + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/device.h> +#include <linux/delay.h> + +#include <linux/fs_enet_pd.h> +#include <linux/fs_uart_pd.h> +#include <linux/fsl_devices.h> +#include <linux/mii.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> + +#include <asm/delay.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/page.h> +#include <asm/processor.h> +#include <asm/time.h> +#include <asm/8xx_immap.h> +#include <asm/cpm1.h> +#include <asm/fs_pd.h> +#include <asm/udbg.h> + +#include "mpc8xx.h" + +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin tqm8xx_pins[] __initdata = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SCC1 */ + {CPM_PORTA, 5, CPM_PIN_INPUT}, /* CLK1 */ + {CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */ + {CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */ + {CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTC, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */ + {CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, + {CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, +}; + +static struct cpm_pin tqm8xx_fec_pins[] __initdata = { + /* MII */ + {CPM_PORTD, 3, CPM_PIN_OUTPUT}, + {CPM_PORTD, 4, CPM_PIN_OUTPUT}, + {CPM_PORTD, 5, CPM_PIN_OUTPUT}, + {CPM_PORTD, 6, CPM_PIN_OUTPUT}, + {CPM_PORTD, 7, CPM_PIN_OUTPUT}, + {CPM_PORTD, 8, CPM_PIN_OUTPUT}, + {CPM_PORTD, 9, CPM_PIN_OUTPUT}, + {CPM_PORTD, 10, CPM_PIN_OUTPUT}, + {CPM_PORTD, 11, CPM_PIN_OUTPUT}, + {CPM_PORTD, 12, CPM_PIN_OUTPUT}, + {CPM_PORTD, 13, CPM_PIN_OUTPUT}, + {CPM_PORTD, 14, CPM_PIN_OUTPUT}, + {CPM_PORTD, 15, CPM_PIN_OUTPUT}, +}; + +static void __init init_pins(int n, struct cpm_pin *pin) +{ + int i; + + for (i = 0; i < n; i++) { + cpm1_set_pin(pin->port, pin->pin, pin->flags); + pin++; + } +} + +static void __init init_ioports(void) +{ + struct device_node *dnode; + struct property *prop; + int len; + + init_pins(ARRAY_SIZE(tqm8xx_pins), &tqm8xx_pins[0]); + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + + dnode = of_find_node_by_name(NULL, "aliases"); + if (dnode == NULL) + return; + prop = of_find_property(dnode, "ethernet1", &len); + if (prop == NULL) + return; + + /* init FEC pins */ + init_pins(ARRAY_SIZE(tqm8xx_fec_pins), &tqm8xx_fec_pins[0]); +} + +static void __init tqm8xx_setup_arch(void) +{ + cpm_reset(); + init_ioports(); +} + +static int __init tqm8xx_probe(void) +{ + return of_machine_is_compatible("tqc,tqm8xx"); +} + +static const struct of_device_id of_bus_ids[] __initconst = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + { .compatible = "simple-bus" }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(tqm8xx, declare_of_platform_devices); + +define_machine(tqm8xx) { + .name = "TQM8xx", + .probe = tqm8xx_probe, + .setup_arch = tqm8xx_setup_arch, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .set_rtc_time = mpc8xx_set_rtc_time, + .get_rtc_time = mpc8xx_get_rtc_time, + .progress = udbg_progress, +}; |