summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/chrp
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/chrp')
-rw-r--r--arch/powerpc/platforms/chrp/Kconfig16
-rw-r--r--arch/powerpc/platforms/chrp/Makefile3
-rw-r--r--arch/powerpc/platforms/chrp/chrp.h12
-rw-r--r--arch/powerpc/platforms/chrp/gg2.h61
-rw-r--r--arch/powerpc/platforms/chrp/nvram.c94
-rw-r--r--arch/powerpc/platforms/chrp/pci.c380
-rw-r--r--arch/powerpc/platforms/chrp/pegasos_eth.c201
-rw-r--r--arch/powerpc/platforms/chrp/setup.c608
-rw-r--r--arch/powerpc/platforms/chrp/smp.c55
-rw-r--r--arch/powerpc/platforms/chrp/time.c161
10 files changed, 1591 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/chrp/Kconfig b/arch/powerpc/platforms/chrp/Kconfig
new file mode 100644
index 000000000..ead99eff8
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/Kconfig
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+config PPC_CHRP
+ bool "Common Hardware Reference Platform (CHRP) based machines"
+ depends on 6xx
+ select HAVE_PCSPKR_PLATFORM
+ select MPIC
+ select PPC_I8259
+ select PPC_INDIRECT_PCI
+ select PPC_RTAS
+ select PPC_RTAS_DAEMON
+ select RTAS_ERROR_LOGGING
+ select PPC_MPC106
+ select PPC_UDBG_16550
+ select PPC_NATIVE
+ select PCI
+ default y
diff --git a/arch/powerpc/platforms/chrp/Makefile b/arch/powerpc/platforms/chrp/Makefile
new file mode 100644
index 000000000..4b3bfadc7
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/Makefile
@@ -0,0 +1,3 @@
+obj-y += setup.o time.o pegasos_eth.o pci.o
+obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_NVRAM) += nvram.o
diff --git a/arch/powerpc/platforms/chrp/chrp.h b/arch/powerpc/platforms/chrp/chrp.h
new file mode 100644
index 000000000..a5a7c338c
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/chrp.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Declarations of CHRP platform-specific things.
+ */
+
+extern void chrp_nvram_init(void);
+extern void chrp_get_rtc_time(struct rtc_time *);
+extern int chrp_set_rtc_time(struct rtc_time *);
+extern long chrp_time_init(void);
+
+extern void chrp_find_bridges(void);
+extern void chrp_event_scan(unsigned long);
diff --git a/arch/powerpc/platforms/chrp/gg2.h b/arch/powerpc/platforms/chrp/gg2.h
new file mode 100644
index 000000000..341ae55b9
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/gg2.h
@@ -0,0 +1,61 @@
+/*
+ * include/asm-ppc/gg2.h -- VLSI VAS96011/12 `Golden Gate 2' register definitions
+ *
+ * Copyright (C) 1997 Geert Uytterhoeven
+ *
+ * This file is based on the following documentation:
+ *
+ * The VAS96011/12 Chipset, Data Book, Edition 1.0
+ * VLSI Technology, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASMPPC_GG2_H
+#define _ASMPPC_GG2_H
+
+ /*
+ * Memory Map (CHRP mode)
+ */
+
+#define GG2_PCI_MEM_BASE 0xc0000000 /* Peripheral memory space */
+#define GG2_ISA_MEM_BASE 0xf7000000 /* Peripheral memory alias */
+#define GG2_ISA_IO_BASE 0xf8000000 /* Peripheral I/O space */
+#define GG2_PCI_CONFIG_BASE 0xfec00000 /* PCI configuration space */
+#define GG2_INT_ACK_SPECIAL 0xfec80000 /* Interrupt acknowledge and */
+ /* special PCI cycles */
+#define GG2_ROM_BASE0 0xff000000 /* ROM bank 0 */
+#define GG2_ROM_BASE1 0xff800000 /* ROM bank 1 */
+
+
+ /*
+ * GG2 specific PCI Registers
+ */
+
+extern void __iomem *gg2_pci_config_base; /* kernel virtual address */
+
+#define GG2_PCI_BUSNO 0x40 /* Bus number */
+#define GG2_PCI_SUBBUSNO 0x41 /* Subordinate bus number */
+#define GG2_PCI_DISCCTR 0x42 /* Disconnect counter */
+#define GG2_PCI_PPC_CTRL 0x50 /* PowerPC interface control register */
+#define GG2_PCI_ADDR_MAP 0x5c /* Address map */
+#define GG2_PCI_PCI_CTRL 0x60 /* PCI interface control register */
+#define GG2_PCI_ROM_CTRL 0x70 /* ROM interface control register */
+#define GG2_PCI_ROM_TIME 0x74 /* ROM timing */
+#define GG2_PCI_CC_CTRL 0x80 /* Cache controller control register */
+#define GG2_PCI_DRAM_BANK0 0x90 /* Control register for DRAM bank #0 */
+#define GG2_PCI_DRAM_BANK1 0x94 /* Control register for DRAM bank #1 */
+#define GG2_PCI_DRAM_BANK2 0x98 /* Control register for DRAM bank #2 */
+#define GG2_PCI_DRAM_BANK3 0x9c /* Control register for DRAM bank #3 */
+#define GG2_PCI_DRAM_BANK4 0xa0 /* Control register for DRAM bank #4 */
+#define GG2_PCI_DRAM_BANK5 0xa4 /* Control register for DRAM bank #5 */
+#define GG2_PCI_DRAM_TIME0 0xb0 /* Timing parameters set #0 */
+#define GG2_PCI_DRAM_TIME1 0xb4 /* Timing parameters set #1 */
+#define GG2_PCI_DRAM_CTRL 0xc0 /* DRAM control */
+#define GG2_PCI_ERR_CTRL 0xd0 /* Error control register */
+#define GG2_PCI_ERR_STATUS 0xd4 /* Error status register */
+ /* Cleared when read */
+
+#endif /* _ASMPPC_GG2_H */
diff --git a/arch/powerpc/platforms/chrp/nvram.c b/arch/powerpc/platforms/chrp/nvram.c
new file mode 100644
index 000000000..791b86398
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/nvram.c
@@ -0,0 +1,94 @@
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * /dev/nvram driver for PPC
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/rtas.h>
+#include "chrp.h"
+
+static unsigned int nvram_size;
+static unsigned char nvram_buf[4];
+static DEFINE_SPINLOCK(nvram_lock);
+
+static unsigned char chrp_nvram_read(int addr)
+{
+ unsigned int done;
+ unsigned long flags;
+ unsigned char ret;
+
+ if (addr >= nvram_size) {
+ printk(KERN_DEBUG "%s: read addr %d > nvram_size %u\n",
+ current->comm, addr, nvram_size);
+ return 0xff;
+ }
+ spin_lock_irqsave(&nvram_lock, flags);
+ if ((rtas_call(rtas_token("nvram-fetch"), 3, 2, &done, addr,
+ __pa(nvram_buf), 1) != 0) || 1 != done)
+ ret = 0xff;
+ else
+ ret = nvram_buf[0];
+ spin_unlock_irqrestore(&nvram_lock, flags);
+
+ return ret;
+}
+
+static void chrp_nvram_write(int addr, unsigned char val)
+{
+ unsigned int done;
+ unsigned long flags;
+
+ if (addr >= nvram_size) {
+ printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n",
+ current->comm, addr, nvram_size);
+ return;
+ }
+ spin_lock_irqsave(&nvram_lock, flags);
+ nvram_buf[0] = val;
+ if ((rtas_call(rtas_token("nvram-store"), 3, 2, &done, addr,
+ __pa(nvram_buf), 1) != 0) || 1 != done)
+ printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr);
+ spin_unlock_irqrestore(&nvram_lock, flags);
+}
+
+void __init chrp_nvram_init(void)
+{
+ struct device_node *nvram;
+ const __be32 *nbytes_p;
+ unsigned int proplen;
+
+ nvram = of_find_node_by_type(NULL, "nvram");
+ if (nvram == NULL)
+ return;
+
+ nbytes_p = of_get_property(nvram, "#bytes", &proplen);
+ if (nbytes_p == NULL || proplen != sizeof(unsigned int)) {
+ of_node_put(nvram);
+ return;
+ }
+
+ nvram_size = be32_to_cpup(nbytes_p);
+
+ printk(KERN_INFO "CHRP nvram contains %u bytes\n", nvram_size);
+ of_node_put(nvram);
+
+ ppc_md.nvram_read_val = chrp_nvram_read;
+ ppc_md.nvram_write_val = chrp_nvram_write;
+
+ return;
+}
+
+MODULE_LICENSE("GPL v2");
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
new file mode 100644
index 000000000..5ddb57b82
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CHRP pci routines.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/hydra.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+#include <asm/grackle.h>
+#include <asm/rtas.h>
+
+#include "chrp.h"
+#include "gg2.h"
+
+/* LongTrail */
+void __iomem *gg2_pci_config_base;
+
+/*
+ * The VLSI Golden Gate II has only 512K of PCI configuration space, so we
+ * limit the bus number to 3 bits
+ */
+
+static int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off,
+ int len, u32 *val)
+{
+ volatile void __iomem *cfg_data;
+ struct pci_controller *hose = pci_bus_to_host(bus);
+
+ if (bus->number > 7)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that off is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off);
+ switch (len) {
+ case 1:
+ *val = in_8(cfg_data);
+ break;
+ case 2:
+ *val = in_le16(cfg_data);
+ break;
+ default:
+ *val = in_le32(cfg_data);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off,
+ int len, u32 val)
+{
+ volatile void __iomem *cfg_data;
+ struct pci_controller *hose = pci_bus_to_host(bus);
+
+ if (bus->number > 7)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that off is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off);
+ switch (len) {
+ case 1:
+ out_8(cfg_data, val);
+ break;
+ case 2:
+ out_le16(cfg_data, val);
+ break;
+ default:
+ out_le32(cfg_data, val);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops gg2_pci_ops =
+{
+ .read = gg2_read_config,
+ .write = gg2_write_config,
+};
+
+/*
+ * Access functions for PCI config space using RTAS calls.
+ */
+static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 *val)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
+ | (((bus->number - hose->first_busno) & 0xff) << 16)
+ | (hose->global_number << 24);
+ int ret = -1;
+ int rval;
+
+ rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len);
+ *val = ret;
+ return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
+}
+
+static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 val)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
+ | (((bus->number - hose->first_busno) & 0xff) << 16)
+ | (hose->global_number << 24);
+ int rval;
+
+ rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL,
+ addr, len, val);
+ return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops rtas_pci_ops =
+{
+ .read = rtas_read_config,
+ .write = rtas_write_config,
+};
+
+volatile struct Hydra __iomem *Hydra = NULL;
+
+int __init
+hydra_init(void)
+{
+ struct device_node *np;
+ struct resource r;
+
+ np = of_find_node_by_name(NULL, "mac-io");
+ if (np == NULL || of_address_to_resource(np, 0, &r)) {
+ of_node_put(np);
+ return 0;
+ }
+ of_node_put(np);
+ Hydra = ioremap(r.start, resource_size(&r));
+ printk("Hydra Mac I/O at %llx\n", (unsigned long long)r.start);
+ printk("Hydra Feature_Control was %x",
+ in_le32(&Hydra->Feature_Control));
+ out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN |
+ HYDRA_FC_SCSI_CELL_EN |
+ HYDRA_FC_SCCA_ENABLE |
+ HYDRA_FC_SCCB_ENABLE |
+ HYDRA_FC_ARB_BYPASS |
+ HYDRA_FC_MPIC_ENABLE |
+ HYDRA_FC_SLOW_SCC_PCLK |
+ HYDRA_FC_MPIC_IS_MASTER));
+ printk(", now %x\n", in_le32(&Hydra->Feature_Control));
+ return 1;
+}
+
+#define PRG_CL_RESET_VALID 0x00010000
+
+static void __init
+setup_python(struct pci_controller *hose, struct device_node *dev)
+{
+ u32 __iomem *reg;
+ u32 val;
+ struct resource r;
+
+ if (of_address_to_resource(dev, 0, &r)) {
+ printk(KERN_ERR "No address for Python PCI controller\n");
+ return;
+ }
+
+ /* Clear the magic go-slow bit */
+ reg = ioremap(r.start + 0xf6000, 0x40);
+ BUG_ON(!reg);
+ val = in_be32(&reg[12]);
+ if (val & PRG_CL_RESET_VALID) {
+ out_be32(&reg[12], val & ~PRG_CL_RESET_VALID);
+ in_be32(&reg[12]);
+ }
+ iounmap(reg);
+
+ setup_indirect_pci(hose, r.start + 0xf8000, r.start + 0xf8010, 0);
+}
+
+/* Marvell Discovery II based Pegasos 2 */
+static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev)
+{
+ struct device_node *root = of_find_node_by_path("/");
+ struct device_node *rtas;
+
+ rtas = of_find_node_by_name (root, "rtas");
+ if (rtas) {
+ hose->ops = &rtas_pci_ops;
+ of_node_put(rtas);
+ } else {
+ printk ("RTAS supporting Pegasos OF not found, please upgrade"
+ " your firmware\n");
+ }
+ pci_add_flags(PCI_REASSIGN_ALL_BUS);
+ /* keep the reference to the root node */
+}
+
+void __init
+chrp_find_bridges(void)
+{
+ struct device_node *dev;
+ const int *bus_range;
+ int len, index = -1;
+ struct pci_controller *hose;
+ const unsigned int *dma;
+ const char *model, *machine;
+ int is_longtrail = 0, is_mot = 0, is_pegasos = 0;
+ struct device_node *root = of_find_node_by_path("/");
+ struct resource r;
+ /*
+ * The PCI host bridge nodes on some machines don't have
+ * properties to adequately identify them, so we have to
+ * look at what sort of machine this is as well.
+ */
+ machine = of_get_property(root, "model", NULL);
+ if (machine != NULL) {
+ is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0;
+ is_mot = strncmp(machine, "MOT", 3) == 0;
+ if (strncmp(machine, "Pegasos2", 8) == 0)
+ is_pegasos = 2;
+ else if (strncmp(machine, "Pegasos", 7) == 0)
+ is_pegasos = 1;
+ }
+ for (dev = root->child; dev != NULL; dev = dev->sibling) {
+ if (dev->type == NULL || strcmp(dev->type, "pci") != 0)
+ continue;
+ ++index;
+ /* The GG2 bridge on the LongTrail doesn't have an address */
+ if (of_address_to_resource(dev, 0, &r) && !is_longtrail) {
+ printk(KERN_WARNING "Can't use %pOF: no address\n",
+ dev);
+ continue;
+ }
+ bus_range = of_get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %pOF\n",
+ dev);
+ continue;
+ }
+ if (bus_range[1] == bus_range[0])
+ printk(KERN_INFO "PCI bus %d", bus_range[0]);
+ else
+ printk(KERN_INFO "PCI buses %d..%d",
+ bus_range[0], bus_range[1]);
+ printk(" controlled by %pOF", dev);
+ if (!is_longtrail)
+ printk(" at %llx", (unsigned long long)r.start);
+ printk("\n");
+
+ hose = pcibios_alloc_controller(dev);
+ if (!hose) {
+ printk("Can't allocate PCI controller structure for %pOF\n",
+ dev);
+ continue;
+ }
+ hose->first_busno = hose->self_busno = bus_range[0];
+ hose->last_busno = bus_range[1];
+
+ model = of_get_property(dev, "model", NULL);
+ if (model == NULL)
+ model = "<none>";
+ if (strncmp(model, "IBM, Python", 11) == 0) {
+ setup_python(hose, dev);
+ } else if (is_mot
+ || strncmp(model, "Motorola, Grackle", 17) == 0) {
+ setup_grackle(hose);
+ } else if (is_longtrail) {
+ void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000);
+ hose->ops = &gg2_pci_ops;
+ hose->cfg_data = p;
+ gg2_pci_config_base = p;
+ } else if (is_pegasos == 1) {
+ setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc, 0);
+ } else if (is_pegasos == 2) {
+ setup_peg2(hose, dev);
+ } else if (!strncmp(model, "IBM,CPC710", 10)) {
+ setup_indirect_pci(hose,
+ r.start + 0x000f8000,
+ r.start + 0x000f8010,
+ 0);
+ if (index == 0) {
+ dma = of_get_property(dev, "system-dma-base",
+ &len);
+ if (dma && len >= sizeof(*dma)) {
+ dma = (unsigned int *)
+ (((unsigned long)dma) +
+ len - sizeof(*dma));
+ pci_dram_offset = *dma;
+ }
+ }
+ } else {
+ printk("No methods for %pOF (model %s), using RTAS\n",
+ dev, model);
+ hose->ops = &rtas_pci_ops;
+ }
+
+ pci_process_bridge_OF_ranges(hose, dev, index == 0);
+
+ /* check the first bridge for a property that we can
+ use to set pci_dram_offset */
+ dma = of_get_property(dev, "ibm,dma-ranges", &len);
+ if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) {
+ pci_dram_offset = dma[2] - dma[3];
+ printk("pci_dram_offset = %lx\n", pci_dram_offset);
+ }
+ }
+ of_node_put(root);
+}
+
+/* SL82C105 IDE Control/Status Register */
+#define SL82C105_IDECSR 0x40
+
+/* Fixup for Winbond ATA quirk, required for briq mostly because the
+ * 8259 is configured for level sensitive IRQ 14 and so wants the
+ * ATA controller to be set to fully native mode or bad things
+ * will happen.
+ */
+static void chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105)
+{
+ u8 progif;
+
+ /* If non-briq machines need that fixup too, please speak up */
+ if (!machine_is(chrp) || _chrp_type != _CHRP_briq)
+ return;
+
+ if ((sl82c105->class & 5) != 5) {
+ printk("W83C553: Switching SL82C105 IDE to PCI native mode\n");
+ /* Enable SL82C105 PCI native IDE mode */
+ pci_read_config_byte(sl82c105, PCI_CLASS_PROG, &progif);
+ pci_write_config_byte(sl82c105, PCI_CLASS_PROG, progif | 0x05);
+ sl82c105->class |= 0x05;
+ /* Disable SL82C105 second port */
+ pci_write_config_word(sl82c105, SL82C105_IDECSR, 0x0003);
+ /* Clear IO BARs, they will be reassigned */
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_0, 0);
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_1, 0);
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_2, 0);
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_3, 0);
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
+ chrp_pci_fixup_winbond_ata);
+
+/* Pegasos2 firmware version 20040810 configures the built-in IDE controller
+ * in legacy mode, but sets the PCI registers to PCI native mode.
+ * The chip can only operate in legacy mode, so force the PCI class into legacy
+ * mode as well. The same fixup must be done to the class-code property in
+ * the IDE node /pci@80000000/ide@C,1
+ */
+static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
+{
+ u8 progif;
+ struct pci_dev *viaisa;
+
+ if (!machine_is(chrp) || _chrp_type != _CHRP_Pegasos)
+ return;
+ if (viaide->irq != 14)
+ return;
+
+ viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
+ if (!viaisa)
+ return;
+ dev_info(&viaide->dev, "Fixing VIA IDE, force legacy mode on\n");
+
+ pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif);
+ pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5);
+ viaide->class &= ~0x5;
+
+ pci_dev_put(viaisa);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata);
diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c
new file mode 100644
index 000000000..485cf5ef7
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/pegasos_eth.c
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005 Sven Luther <sl@bplan-gmbh.de>
+ * Thanks to :
+ * Dale Farnsworth <dale@farnsworth.org>
+ * Mark A. Greer <mgreer@mvista.com>
+ * Nicolas DET <nd@bplan-gmbh.de>
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * And anyone else who helped me on this.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx.h>
+#include <linux/pci.h>
+
+#define PEGASOS2_MARVELL_REGBASE (0xf1000000)
+#define PEGASOS2_MARVELL_REGSIZE (0x00004000)
+#define PEGASOS2_SRAM_BASE (0xf2000000)
+#define PEGASOS2_SRAM_SIZE (256*1024)
+
+#define PEGASOS2_SRAM_BASE_ETH_PORT0 (PEGASOS2_SRAM_BASE)
+#define PEGASOS2_SRAM_BASE_ETH_PORT1 (PEGASOS2_SRAM_BASE_ETH_PORT0 + (PEGASOS2_SRAM_SIZE / 2) )
+
+
+#define PEGASOS2_SRAM_RXRING_SIZE (PEGASOS2_SRAM_SIZE/4)
+#define PEGASOS2_SRAM_TXRING_SIZE (PEGASOS2_SRAM_SIZE/4)
+
+#undef BE_VERBOSE
+
+static struct resource mv643xx_eth_shared_resources[] = {
+ [0] = {
+ .name = "ethernet shared base",
+ .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
+ .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
+ MV643XX_ETH_SHARED_REGS_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device mv643xx_eth_shared_device = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources),
+ .resource = mv643xx_eth_shared_resources,
+};
+
+/*
+ * The orion mdio driver only covers shared + 0x4 up to shared + 0x84 - 1
+ */
+static struct resource mv643xx_eth_mvmdio_resources[] = {
+ [0] = {
+ .name = "ethernet mdio base",
+ .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS + 0x4,
+ .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + 0x83,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device mv643xx_eth_mvmdio_device = {
+ .name = "orion-mdio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mv643xx_eth_mvmdio_resources),
+ .resource = mv643xx_eth_mvmdio_resources,
+};
+
+static struct resource mv643xx_eth_port1_resources[] = {
+ [0] = {
+ .name = "eth port1 irq",
+ .start = 9,
+ .end = 9,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv643xx_eth_platform_data eth_port1_pd = {
+ .shared = &mv643xx_eth_shared_device,
+ .port_number = 1,
+ .phy_addr = MV643XX_ETH_PHY_ADDR(7),
+
+ .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH_PORT1,
+ .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE,
+ .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16,
+
+ .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH_PORT1 + PEGASOS2_SRAM_TXRING_SIZE,
+ .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE,
+ .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16,
+};
+
+static struct platform_device eth_port1_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mv643xx_eth_port1_resources),
+ .resource = mv643xx_eth_port1_resources,
+ .dev = {
+ .platform_data = &eth_port1_pd,
+ },
+};
+
+static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
+ &mv643xx_eth_shared_device,
+ &mv643xx_eth_mvmdio_device,
+ &eth_port1_device,
+};
+
+/***********/
+/***********/
+#define MV_READ(offset,val) { val = readl(mv643xx_reg_base + offset); }
+#define MV_WRITE(offset,data) writel(data, mv643xx_reg_base + offset)
+
+static void __iomem *mv643xx_reg_base;
+
+static int Enable_SRAM(void)
+{
+ u32 ALong;
+
+ if (mv643xx_reg_base == NULL)
+ mv643xx_reg_base = ioremap(PEGASOS2_MARVELL_REGBASE,
+ PEGASOS2_MARVELL_REGSIZE);
+
+ if (mv643xx_reg_base == NULL)
+ return -ENOMEM;
+
+#ifdef BE_VERBOSE
+ printk("Pegasos II/Marvell MV64361: register remapped from %p to %p\n",
+ (void *)PEGASOS2_MARVELL_REGBASE, (void *)mv643xx_reg_base);
+#endif
+
+ MV_WRITE(MV64340_SRAM_CONFIG, 0);
+
+ MV_WRITE(MV64340_INTEGRATED_SRAM_BASE_ADDR, PEGASOS2_SRAM_BASE >> 16);
+
+ MV_READ(MV64340_BASE_ADDR_ENABLE, ALong);
+ ALong &= ~(1 << 19);
+ MV_WRITE(MV64340_BASE_ADDR_ENABLE, ALong);
+
+ ALong = 0x02;
+ ALong |= PEGASOS2_SRAM_BASE & 0xffff0000;
+ MV_WRITE(MV643XX_ETH_BAR_4, ALong);
+
+ MV_WRITE(MV643XX_ETH_SIZE_REG_4, (PEGASOS2_SRAM_SIZE-1) & 0xffff0000);
+
+ MV_READ(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong);
+ ALong &= ~(1 << 4);
+ MV_WRITE(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong);
+
+#ifdef BE_VERBOSE
+ printk("Pegasos II/Marvell MV64361: register unmapped\n");
+ printk("Pegasos II/Marvell MV64361: SRAM at %p, size=%x\n", (void*) PEGASOS2_SRAM_BASE, PEGASOS2_SRAM_SIZE);
+#endif
+
+ iounmap(mv643xx_reg_base);
+ mv643xx_reg_base = NULL;
+
+ return 1;
+}
+
+
+/***********/
+/***********/
+static int __init mv643xx_eth_add_pds(void)
+{
+ int ret = 0;
+ static struct pci_device_id pci_marvell_mv64360[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360) },
+ { }
+ };
+
+#ifdef BE_VERBOSE
+ printk("Pegasos II/Marvell MV64361: init\n");
+#endif
+
+ if (pci_dev_present(pci_marvell_mv64360)) {
+ ret = platform_add_devices(mv643xx_eth_pd_devs,
+ ARRAY_SIZE(mv643xx_eth_pd_devs));
+
+ if ( Enable_SRAM() < 0)
+ {
+ eth_port1_pd.tx_sram_addr = 0;
+ eth_port1_pd.tx_sram_size = 0;
+ eth_port1_pd.rx_sram_addr = 0;
+ eth_port1_pd.rx_sram_size = 0;
+
+#ifdef BE_VERBOSE
+ printk("Pegasos II/Marvell MV64361: Can't enable the "
+ "SRAM\n");
+#endif
+ }
+ }
+
+#ifdef BE_VERBOSE
+ printk("Pegasos II/Marvell MV64361: init is over\n");
+#endif
+
+ return ret;
+}
+
+device_initcall(mv643xx_eth_add_pds);
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
new file mode 100644
index 000000000..d6d8ffc02
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -0,0 +1,608 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 1995 Linus Torvalds
+ * Adapted from 'alpha' version by Gary Thomas
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ */
+
+/*
+ * bootup setup stuff..
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/tty.h>
+#include <linux/major.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <generated/utsrelease.h>
+#include <linux/adb.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/timer.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/dma.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/hydra.h>
+#include <asm/sections.h>
+#include <asm/time.h>
+#include <asm/i8259.h>
+#include <asm/mpic.h>
+#include <asm/rtas.h>
+#include <asm/xmon.h>
+
+#include "chrp.h"
+#include "gg2.h"
+
+void rtas_indicator_progress(char *, unsigned short);
+
+int _chrp_type;
+EXPORT_SYMBOL(_chrp_type);
+
+static struct mpic *chrp_mpic;
+
+/* Used for doing CHRP event-scans */
+DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
+unsigned long event_scan_interval;
+
+extern unsigned long loops_per_jiffy;
+
+/* To be replaced by RTAS when available */
+static unsigned int __iomem *briq_SPOR;
+
+#ifdef CONFIG_SMP
+extern struct smp_ops_t chrp_smp_ops;
+#endif
+
+static const char *gg2_memtypes[4] = {
+ "FPM", "SDRAM", "EDO", "BEDO"
+};
+static const char *gg2_cachesizes[4] = {
+ "256 KB", "512 KB", "1 MB", "Reserved"
+};
+static const char *gg2_cachetypes[4] = {
+ "Asynchronous", "Reserved", "Flow-Through Synchronous",
+ "Pipelined Synchronous"
+};
+static const char *gg2_cachemodes[4] = {
+ "Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
+};
+
+static const char *chrp_names[] = {
+ "Unknown",
+ "","","",
+ "Motorola",
+ "IBM or Longtrail",
+ "Genesi Pegasos",
+ "Total Impact Briq"
+};
+
+static void chrp_show_cpuinfo(struct seq_file *m)
+{
+ int i, sdramen;
+ unsigned int t;
+ struct device_node *root;
+ const char *model = "";
+
+ root = of_find_node_by_path("/");
+ if (root)
+ model = of_get_property(root, "model", NULL);
+ seq_printf(m, "machine\t\t: CHRP %s\n", model);
+
+ /* longtrail (goldengate) stuff */
+ if (model && !strncmp(model, "IBM,LongTrail", 13)) {
+ /* VLSI VAS96011/12 `Golden Gate 2' */
+ /* Memory banks */
+ sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL)
+ >>31) & 1;
+ for (i = 0; i < (sdramen ? 4 : 6); i++) {
+ t = in_le32(gg2_pci_config_base+
+ GG2_PCI_DRAM_BANK0+
+ i*4);
+ if (!(t & 1))
+ continue;
+ switch ((t>>8) & 0x1f) {
+ case 0x1f:
+ model = "4 MB";
+ break;
+ case 0x1e:
+ model = "8 MB";
+ break;
+ case 0x1c:
+ model = "16 MB";
+ break;
+ case 0x18:
+ model = "32 MB";
+ break;
+ case 0x10:
+ model = "64 MB";
+ break;
+ case 0x00:
+ model = "128 MB";
+ break;
+ default:
+ model = "Reserved";
+ break;
+ }
+ seq_printf(m, "memory bank %d\t: %s %s\n", i, model,
+ gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]);
+ }
+ /* L2 cache */
+ t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL);
+ seq_printf(m, "board l2\t: %s %s (%s)\n",
+ gg2_cachesizes[(t>>7) & 3],
+ gg2_cachetypes[(t>>2) & 3],
+ gg2_cachemodes[t & 3]);
+ }
+ of_node_put(root);
+}
+
+/*
+ * Fixes for the National Semiconductor PC78308VUL SuperI/O
+ *
+ * Some versions of Open Firmware incorrectly initialize the IRQ settings
+ * for keyboard and mouse
+ */
+static inline void __init sio_write(u8 val, u8 index)
+{
+ outb(index, 0x15c);
+ outb(val, 0x15d);
+}
+
+static inline u8 __init sio_read(u8 index)
+{
+ outb(index, 0x15c);
+ return inb(0x15d);
+}
+
+static void __init sio_fixup_irq(const char *name, u8 device, u8 level,
+ u8 type)
+{
+ u8 level0, type0, active;
+
+ /* select logical device */
+ sio_write(device, 0x07);
+ active = sio_read(0x30);
+ level0 = sio_read(0x70);
+ type0 = sio_read(0x71);
+ if (level0 != level || type0 != type || !active) {
+ printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: "
+ "remapping to level %d, type %d, active\n",
+ name, level0, type0, !active ? "in" : "", level, type);
+ sio_write(0x01, 0x30);
+ sio_write(level, 0x70);
+ sio_write(type, 0x71);
+ }
+}
+
+static void __init sio_init(void)
+{
+ struct device_node *root;
+ const char *model;
+
+ root = of_find_node_by_path("/");
+ if (!root)
+ return;
+
+ model = of_get_property(root, "model", NULL);
+ if (model && !strncmp(model, "IBM,LongTrail", 13)) {
+ /* logical device 0 (KBC/Keyboard) */
+ sio_fixup_irq("keyboard", 0, 1, 2);
+ /* select logical device 1 (KBC/Mouse) */
+ sio_fixup_irq("mouse", 1, 12, 2);
+ }
+
+ of_node_put(root);
+}
+
+
+static void __init pegasos_set_l2cr(void)
+{
+ struct device_node *np;
+
+ /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */
+ if (_chrp_type != _CHRP_Pegasos)
+ return;
+
+ /* Enable L2 cache if needed */
+ np = of_find_node_by_type(NULL, "cpu");
+ if (np != NULL) {
+ const unsigned int *l2cr = of_get_property(np, "l2cr", NULL);
+ if (l2cr == NULL) {
+ printk ("Pegasos l2cr : no cpu l2cr property found\n");
+ goto out;
+ }
+ if (!((*l2cr) & 0x80000000)) {
+ printk ("Pegasos l2cr : L2 cache was not active, "
+ "activating\n");
+ _set_L2CR(0);
+ _set_L2CR((*l2cr) | 0x80000000);
+ }
+ }
+out:
+ of_node_put(np);
+}
+
+static void __noreturn briq_restart(char *cmd)
+{
+ local_irq_disable();
+ if (briq_SPOR)
+ out_be32(briq_SPOR, 0);
+ for(;;);
+}
+
+/*
+ * Per default, input/output-device points to the keyboard/screen
+ * If no card is installed, the built-in serial port is used as a fallback.
+ * But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
+ * the the built-in serial node. Instead, a /failsafe node is created.
+ */
+static __init void chrp_init(void)
+{
+ struct device_node *node;
+ const char *property;
+
+ if (strstr(boot_command_line, "console="))
+ return;
+ /* find the boot console from /chosen/stdout */
+ if (!of_chosen)
+ return;
+ node = of_find_node_by_path("/");
+ if (!node)
+ return;
+ property = of_get_property(node, "model", NULL);
+ if (!property)
+ goto out_put;
+ if (strcmp(property, "Pegasos2"))
+ goto out_put;
+ /* this is a Pegasos2 */
+ property = of_get_property(of_chosen, "linux,stdout-path", NULL);
+ if (!property)
+ goto out_put;
+ of_node_put(node);
+ node = of_find_node_by_path(property);
+ if (!node)
+ return;
+ property = of_get_property(node, "device_type", NULL);
+ if (!property)
+ goto out_put;
+ if (strcmp(property, "serial"))
+ goto out_put;
+ /*
+ * The 9pin connector is either /failsafe
+ * or /pci@80000000/isa@C/serial@i2F8
+ * The optional graphics card has also type 'serial' in VGA mode.
+ */
+ property = of_get_property(node, "name", NULL);
+ if (!property)
+ goto out_put;
+ if (!strcmp(property, "failsafe") || !strcmp(property, "serial"))
+ add_preferred_console("ttyS", 0, NULL);
+out_put:
+ of_node_put(node);
+}
+
+static void __init chrp_setup_arch(void)
+{
+ struct device_node *root = of_find_node_by_path("/");
+ const char *machine = NULL;
+
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000/HZ;
+
+ if (root)
+ machine = of_get_property(root, "model", NULL);
+ if (machine && strncmp(machine, "Pegasos", 7) == 0) {
+ _chrp_type = _CHRP_Pegasos;
+ } else if (machine && strncmp(machine, "IBM", 3) == 0) {
+ _chrp_type = _CHRP_IBM;
+ } else if (machine && strncmp(machine, "MOT", 3) == 0) {
+ _chrp_type = _CHRP_Motorola;
+ } else if (machine && strncmp(machine, "TotalImpact,BRIQ-1", 18) == 0) {
+ _chrp_type = _CHRP_briq;
+ /* Map the SPOR register on briq and change the restart hook */
+ briq_SPOR = ioremap(0xff0000e8, 4);
+ ppc_md.restart = briq_restart;
+ } else {
+ /* Let's assume it is an IBM chrp if all else fails */
+ _chrp_type = _CHRP_IBM;
+ }
+ of_node_put(root);
+ printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]);
+
+ rtas_initialize();
+ if (rtas_token("display-character") >= 0)
+ ppc_md.progress = rtas_progress;
+
+ /* use RTAS time-of-day routines if available */
+ if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) {
+ ppc_md.get_boot_time = rtas_get_boot_time;
+ ppc_md.get_rtc_time = rtas_get_rtc_time;
+ ppc_md.set_rtc_time = rtas_set_rtc_time;
+ }
+
+ /* On pegasos, enable the L2 cache if not already done by OF */
+ pegasos_set_l2cr();
+
+ /* Lookup PCI host bridges */
+ chrp_find_bridges();
+
+ /*
+ * Temporary fixes for PCI devices.
+ * -- Geert
+ */
+ hydra_init(); /* Mac I/O */
+
+ /*
+ * Fix the Super I/O configuration
+ */
+ sio_init();
+
+ pci_create_OF_bus_map();
+
+ /*
+ * Print the banner, then scroll down so boot progress
+ * can be printed. -- Cort
+ */
+ if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
+}
+
+static void chrp_8259_cascade(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ unsigned int cascade_irq = i8259_irq();
+
+ if (cascade_irq)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
+/*
+ * Finds the open-pic node and sets up the mpic driver.
+ */
+static void __init chrp_find_openpic(void)
+{
+ struct device_node *np, *root;
+ int len, i, j;
+ int isu_size;
+ const unsigned int *iranges, *opprop = NULL;
+ int oplen = 0;
+ unsigned long opaddr;
+ int na = 1;
+
+ np = of_find_node_by_type(NULL, "open-pic");
+ if (np == NULL)
+ return;
+ root = of_find_node_by_path("/");
+ if (root) {
+ opprop = of_get_property(root, "platform-open-pic", &oplen);
+ na = of_n_addr_cells(root);
+ }
+ if (opprop && oplen >= na * sizeof(unsigned int)) {
+ opaddr = opprop[na-1]; /* assume 32-bit */
+ oplen /= na * sizeof(unsigned int);
+ } else {
+ struct resource r;
+ if (of_address_to_resource(np, 0, &r)) {
+ goto bail;
+ }
+ opaddr = r.start;
+ oplen = 0;
+ }
+
+ printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
+
+ iranges = of_get_property(np, "interrupt-ranges", &len);
+ if (iranges == NULL)
+ len = 0; /* non-distributed mpic */
+ else
+ len /= 2 * sizeof(unsigned int);
+
+ /*
+ * The first pair of cells in interrupt-ranges refers to the
+ * IDU; subsequent pairs refer to the ISUs.
+ */
+ if (oplen < len) {
+ printk(KERN_ERR "Insufficient addresses for distributed"
+ " OpenPIC (%d < %d)\n", oplen, len);
+ len = oplen;
+ }
+
+ isu_size = 0;
+ if (len > 0 && iranges[1] != 0) {
+ printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n",
+ iranges[0], iranges[0] + iranges[1] - 1);
+ }
+ if (len > 1)
+ isu_size = iranges[3];
+
+ chrp_mpic = mpic_alloc(np, opaddr, MPIC_NO_RESET,
+ isu_size, 0, " MPIC ");
+ if (chrp_mpic == NULL) {
+ printk(KERN_ERR "Failed to allocate MPIC structure\n");
+ goto bail;
+ }
+ j = na - 1;
+ for (i = 1; i < len; ++i) {
+ iranges += 2;
+ j += na;
+ printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n",
+ iranges[0], iranges[0] + iranges[1] - 1,
+ opprop[j]);
+ mpic_assign_isu(chrp_mpic, i - 1, opprop[j]);
+ }
+
+ mpic_init(chrp_mpic);
+ ppc_md.get_irq = mpic_get_irq;
+ bail:
+ of_node_put(root);
+ of_node_put(np);
+}
+
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
+static struct irqaction xmon_irqaction = {
+ .handler = xmon_irq,
+ .name = "XMON break",
+};
+#endif
+
+static void __init chrp_find_8259(void)
+{
+ struct device_node *np, *pic = NULL;
+ unsigned long chrp_int_ack = 0;
+ unsigned int cascade_irq;
+
+ /* Look for cascade */
+ for_each_node_by_type(np, "interrupt-controller")
+ if (of_device_is_compatible(np, "chrp,iic")) {
+ pic = np;
+ break;
+ }
+ /* Ok, 8259 wasn't found. We need to handle the case where
+ * we have a pegasos that claims to be chrp but doesn't have
+ * a proper interrupt tree
+ */
+ if (pic == NULL && chrp_mpic != NULL) {
+ printk(KERN_ERR "i8259: Not found in device-tree"
+ " assuming no legacy interrupts\n");
+ return;
+ }
+
+ /* Look for intack. In a perfect world, we would look for it on
+ * the ISA bus that holds the 8259 but heh... Works that way. If
+ * we ever see a problem, we can try to re-use the pSeries code here.
+ * Also, Pegasos-type platforms don't have a proper node to start
+ * from anyway
+ */
+ for_each_node_by_name(np, "pci") {
+ const unsigned int *addrp = of_get_property(np,
+ "8259-interrupt-acknowledge", NULL);
+
+ if (addrp == NULL)
+ continue;
+ chrp_int_ack = addrp[of_n_addr_cells(np)-1];
+ break;
+ }
+ of_node_put(np);
+ if (np == NULL)
+ printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
+ " address, polling\n");
+
+ i8259_init(pic, chrp_int_ack);
+ if (ppc_md.get_irq == NULL) {
+ ppc_md.get_irq = i8259_irq;
+ irq_set_default_host(i8259_get_host());
+ }
+ if (chrp_mpic != NULL) {
+ cascade_irq = irq_of_parse_and_map(pic, 0);
+ if (!cascade_irq)
+ printk(KERN_ERR "i8259: failed to map cascade irq\n");
+ else
+ irq_set_chained_handler(cascade_irq,
+ chrp_8259_cascade);
+ }
+}
+
+static void __init chrp_init_IRQ(void)
+{
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
+ struct device_node *kbd;
+#endif
+ chrp_find_openpic();
+ chrp_find_8259();
+
+#ifdef CONFIG_SMP
+ /* Pegasos has no MPIC, those ops would make it crash. It might be an
+ * option to move setting them to after we probe the PIC though
+ */
+ if (chrp_mpic != NULL)
+ smp_ops = &chrp_smp_ops;
+#endif /* CONFIG_SMP */
+
+ if (_chrp_type == _CHRP_Pegasos)
+ ppc_md.get_irq = i8259_irq;
+
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
+ /* see if there is a keyboard in the device tree
+ with a parent of type "adb" */
+ for_each_node_by_name(kbd, "keyboard")
+ if (kbd->parent && kbd->parent->type
+ && strcmp(kbd->parent->type, "adb") == 0)
+ break;
+ of_node_put(kbd);
+ if (kbd)
+ setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
+#endif
+}
+
+static void __init
+chrp_init2(void)
+{
+#ifdef CONFIG_NVRAM
+ chrp_nvram_init();
+#endif
+
+ request_region(0x20,0x20,"pic1");
+ request_region(0xa0,0x20,"pic2");
+ request_region(0x00,0x20,"dma1");
+ request_region(0x40,0x20,"timer");
+ request_region(0x80,0x10,"dma page reg");
+ request_region(0xc0,0x20,"dma2");
+
+ if (ppc_md.progress)
+ ppc_md.progress(" Have fun! ", 0x7777);
+}
+
+static int __init chrp_probe(void)
+{
+ const char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "device_type", NULL);
+ if (dtype == NULL)
+ return 0;
+ if (strcmp(dtype, "chrp"))
+ return 0;
+
+ ISA_DMA_THRESHOLD = ~0L;
+ DMA_MODE_READ = 0x44;
+ DMA_MODE_WRITE = 0x48;
+
+ pm_power_off = rtas_power_off;
+
+ chrp_init();
+
+ return 1;
+}
+
+define_machine(chrp) {
+ .name = "CHRP",
+ .probe = chrp_probe,
+ .setup_arch = chrp_setup_arch,
+ .init = chrp_init2,
+ .show_cpuinfo = chrp_show_cpuinfo,
+ .init_IRQ = chrp_init_IRQ,
+ .restart = rtas_restart,
+ .halt = rtas_halt,
+ .time_init = chrp_time_init,
+ .set_rtc_time = chrp_set_rtc_time,
+ .get_rtc_time = chrp_get_rtc_time,
+ .calibrate_decr = generic_calibrate_decr,
+ .phys_mem_access_prot = pci_phys_mem_access_prot,
+};
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
new file mode 100644
index 000000000..f7bb6cb8d
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Smp support for CHRP machines.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great
+ * deal of code from the sparc and intel versions.
+ *
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+
+#include <asm/ptrace.h>
+#include <linux/atomic.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/mpic.h>
+#include <asm/rtas.h>
+
+static int smp_chrp_kick_cpu(int nr)
+{
+ *(unsigned long *)KERNELBASE = nr;
+ asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory");
+
+ return 0;
+}
+
+static void smp_chrp_setup_cpu(int cpu_nr)
+{
+ mpic_setup_this_cpu();
+}
+
+/* CHRP with openpic */
+struct smp_ops_t chrp_smp_ops = {
+ .cause_nmi_ipi = NULL,
+ .message_pass = smp_mpic_message_pass,
+ .probe = smp_mpic_probe,
+ .kick_cpu = smp_chrp_kick_cpu,
+ .setup_cpu = smp_chrp_setup_cpu,
+ .give_timebase = rtas_give_timebase,
+ .take_timebase = rtas_take_timebase,
+};
diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c
new file mode 100644
index 000000000..acde7bbe0
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/time.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 1991, 1992, 1995 Linus Torvalds
+ *
+ * Adapted for PowerPC (PReP) by Gary Thomas
+ * Modified by Cort Dougan (cort@cs.nmt.edu).
+ * Copied and modified from arch/i386/kernel/time.c
+ *
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/init.h>
+#include <linux/bcd.h>
+#include <linux/ioport.h>
+
+#include <asm/io.h>
+#include <asm/nvram.h>
+#include <asm/prom.h>
+#include <asm/sections.h>
+#include <asm/time.h>
+
+#include <platforms/chrp/chrp.h>
+
+extern spinlock_t rtc_lock;
+
+#define NVRAM_AS0 0x74
+#define NVRAM_AS1 0x75
+#define NVRAM_DATA 0x77
+
+static int nvram_as1 = NVRAM_AS1;
+static int nvram_as0 = NVRAM_AS0;
+static int nvram_data = NVRAM_DATA;
+
+long __init chrp_time_init(void)
+{
+ struct device_node *rtcs;
+ struct resource r;
+ int base;
+
+ rtcs = of_find_compatible_node(NULL, "rtc", "pnpPNP,b00");
+ if (rtcs == NULL)
+ rtcs = of_find_compatible_node(NULL, "rtc", "ds1385-rtc");
+ if (rtcs == NULL)
+ return 0;
+ if (of_address_to_resource(rtcs, 0, &r)) {
+ of_node_put(rtcs);
+ return 0;
+ }
+ of_node_put(rtcs);
+
+ base = r.start;
+ nvram_as1 = 0;
+ nvram_as0 = base;
+ nvram_data = base + 1;
+
+ return 0;
+}
+
+static int chrp_cmos_clock_read(int addr)
+{
+ if (nvram_as1 != 0)
+ outb(addr>>8, nvram_as1);
+ outb(addr, nvram_as0);
+ return (inb(nvram_data));
+}
+
+static void chrp_cmos_clock_write(unsigned long val, int addr)
+{
+ if (nvram_as1 != 0)
+ outb(addr>>8, nvram_as1);
+ outb(addr, nvram_as0);
+ outb(val, nvram_data);
+ return;
+}
+
+/*
+ * Set the hardware clock. -- Cort
+ */
+int chrp_set_rtc_time(struct rtc_time *tmarg)
+{
+ unsigned char save_control, save_freq_select;
+ struct rtc_time tm = *tmarg;
+
+ spin_lock(&rtc_lock);
+
+ save_control = chrp_cmos_clock_read(RTC_CONTROL); /* tell the clock it's being set */
+
+ chrp_cmos_clock_write((save_control|RTC_SET), RTC_CONTROL);
+
+ save_freq_select = chrp_cmos_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */
+
+ chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ tm.tm_sec = bin2bcd(tm.tm_sec);
+ tm.tm_min = bin2bcd(tm.tm_min);
+ tm.tm_hour = bin2bcd(tm.tm_hour);
+ tm.tm_mon = bin2bcd(tm.tm_mon);
+ tm.tm_mday = bin2bcd(tm.tm_mday);
+ tm.tm_year = bin2bcd(tm.tm_year);
+ }
+ chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS);
+ chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES);
+ chrp_cmos_clock_write(tm.tm_hour,RTC_HOURS);
+ chrp_cmos_clock_write(tm.tm_mon,RTC_MONTH);
+ chrp_cmos_clock_write(tm.tm_mday,RTC_DAY_OF_MONTH);
+ chrp_cmos_clock_write(tm.tm_year,RTC_YEAR);
+
+ /* The following flags have to be released exactly in this order,
+ * otherwise the DS12887 (popular MC146818A clone with integrated
+ * battery and quartz) will not reset the oscillator and will not
+ * update precisely 500 ms later. You won't find this mentioned in
+ * the Dallas Semiconductor data sheets, but who believes data
+ * sheets anyway ... -- Markus Kuhn
+ */
+ chrp_cmos_clock_write(save_control, RTC_CONTROL);
+ chrp_cmos_clock_write(save_freq_select, RTC_FREQ_SELECT);
+
+ spin_unlock(&rtc_lock);
+ return 0;
+}
+
+void chrp_get_rtc_time(struct rtc_time *tm)
+{
+ unsigned int year, mon, day, hour, min, sec;
+
+ do {
+ sec = chrp_cmos_clock_read(RTC_SECONDS);
+ min = chrp_cmos_clock_read(RTC_MINUTES);
+ hour = chrp_cmos_clock_read(RTC_HOURS);
+ day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH);
+ mon = chrp_cmos_clock_read(RTC_MONTH);
+ year = chrp_cmos_clock_read(RTC_YEAR);
+ } while (sec != chrp_cmos_clock_read(RTC_SECONDS));
+
+ if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ sec = bcd2bin(sec);
+ min = bcd2bin(min);
+ hour = bcd2bin(hour);
+ day = bcd2bin(day);
+ mon = bcd2bin(mon);
+ year = bcd2bin(year);
+ }
+ if (year < 70)
+ year += 100;
+ tm->tm_sec = sec;
+ tm->tm_min = min;
+ tm->tm_hour = hour;
+ tm->tm_mday = day;
+ tm->tm_mon = mon;
+ tm->tm_year = year;
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 08:42:17 +0000