summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/powermac/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/powermac/pci.c')
-rw-r--r--arch/powerpc/platforms/powermac/pci.c1265
1 files changed, 1265 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
new file mode 100644
index 000000000..04527d13d
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -0,0 +1,1265 @@
+/*
+ * Support for PCI bridges found on Power Macintoshes.
+ *
+ * Copyright (C) 2003-2005 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
+ * Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/of_pci.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/grackle.h>
+#include <asm/ppc-pci.h>
+
+#include "pmac.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+/* XXX Could be per-controller, but I don't think we risk anything by
+ * assuming we won't have both UniNorth and Bandit */
+static int has_uninorth;
+#ifdef CONFIG_PPC64
+static struct pci_controller *u3_agp;
+#else
+static int has_second_ohare;
+#endif /* CONFIG_PPC64 */
+
+extern int pcibios_assign_bus_offset;
+
+struct device_node *k2_skiplist[2];
+
+/*
+ * Magic constants for enabling cache coherency in the bandit/PSX bridge.
+ */
+#define BANDIT_DEVID_2 8
+#define BANDIT_REVID 3
+
+#define BANDIT_DEVNUM 11
+#define BANDIT_MAGIC 0x50
+#define BANDIT_COHERENT 0x40
+
+static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
+{
+ for (; node; node = node->sibling) {
+ const int * bus_range;
+ const unsigned int *class_code;
+ int len;
+
+ /* For PCI<->PCI bridges or CardBus bridges, we go down */
+ class_code = of_get_property(node, "class-code", NULL);
+ if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+ (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
+ continue;
+ bus_range = of_get_property(node, "bus-range", &len);
+ if (bus_range != NULL && len > 2 * sizeof(int)) {
+ if (bus_range[1] > higher)
+ higher = bus_range[1];
+ }
+ higher = fixup_one_level_bus_range(node->child, higher);
+ }
+ return higher;
+}
+
+/* This routine fixes the "bus-range" property of all bridges in the
+ * system since they tend to have their "last" member wrong on macs
+ *
+ * Note that the bus numbers manipulated here are OF bus numbers, they
+ * are not Linux bus numbers.
+ */
+static void __init fixup_bus_range(struct device_node *bridge)
+{
+ int *bus_range, len;
+ struct property *prop;
+
+ /* Lookup the "bus-range" property for the hose */
+ prop = of_find_property(bridge, "bus-range", &len);
+ if (prop == NULL || prop->length < 2 * sizeof(int))
+ return;
+
+ bus_range = prop->value;
+ bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
+}
+
+/*
+ * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers.
+ *
+ * The "Bandit" version is present in all early PCI PowerMacs,
+ * and up to the first ones using Grackle. Some machines may
+ * have 2 bandit controllers (2 PCI busses).
+ *
+ * "Chaos" is used in some "Bandit"-type machines as a bridge
+ * for the separate display bus. It is accessed the same
+ * way as bandit, but cannot be probed for devices. It therefore
+ * has its own config access functions.
+ *
+ * The "UniNorth" version is present in all Core99 machines
+ * (iBook, G4, new IMacs, and all the recent Apple machines).
+ * It contains 3 controllers in one ASIC.
+ *
+ * The U3 is the bridge used on G5 machines. It contains an
+ * AGP bus which is dealt with the old UniNorth access routines
+ * and a HyperTransport bus which uses its own set of access
+ * functions.
+ */
+
+#define MACRISC_CFA0(devfn, off) \
+ ((1 << (unsigned int)PCI_SLOT(dev_fn)) \
+ | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \
+ | (((unsigned int)(off)) & 0xFCUL))
+
+#define MACRISC_CFA1(bus, devfn, off) \
+ ((((unsigned int)(bus)) << 16) \
+ |(((unsigned int)(devfn)) << 8) \
+ |(((unsigned int)(off)) & 0xFCUL) \
+ |1UL)
+
+static void __iomem *macrisc_cfg_map_bus(struct pci_bus *bus,
+ unsigned int dev_fn,
+ int offset)
+{
+ unsigned int caddr;
+ struct pci_controller *hose;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return NULL;
+
+ if (bus->number == hose->first_busno) {
+ if (dev_fn < (11 << 3))
+ return NULL;
+ caddr = MACRISC_CFA0(dev_fn, offset);
+ } else
+ caddr = MACRISC_CFA1(bus->number, dev_fn, offset);
+
+ /* Uninorth will return garbage if we don't read back the value ! */
+ do {
+ out_le32(hose->cfg_addr, caddr);
+ } while (in_le32(hose->cfg_addr) != caddr);
+
+ offset &= has_uninorth ? 0x07 : 0x03;
+ return hose->cfg_data + offset;
+}
+
+static struct pci_ops macrisc_pci_ops =
+{
+ .map_bus = macrisc_cfg_map_bus,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
+};
+
+#ifdef CONFIG_PPC32
+/*
+ * Verify that a specific (bus, dev_fn) exists on chaos
+ */
+static void __iomem *chaos_map_bus(struct pci_bus *bus, unsigned int devfn,
+ int offset)
+{
+ struct device_node *np;
+ const u32 *vendor, *device;
+
+ if (offset >= 0x100)
+ return NULL;
+ np = of_pci_find_child_device(bus->dev.of_node, devfn);
+ if (np == NULL)
+ return NULL;
+
+ vendor = of_get_property(np, "vendor-id", NULL);
+ device = of_get_property(np, "device-id", NULL);
+ if (vendor == NULL || device == NULL)
+ return NULL;
+
+ if ((*vendor == 0x106b) && (*device == 3) && (offset >= 0x10)
+ && (offset != 0x14) && (offset != 0x18) && (offset <= 0x24))
+ return NULL;
+
+ return macrisc_cfg_map_bus(bus, devfn, offset);
+}
+
+static struct pci_ops chaos_pci_ops =
+{
+ .map_bus = chaos_map_bus,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
+};
+
+static void __init setup_chaos(struct pci_controller *hose,
+ struct resource *addr)
+{
+ /* assume a `chaos' bridge */
+ hose->ops = &chaos_pci_ops;
+ hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000);
+}
+#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC64
+/*
+ * These versions of U3 HyperTransport config space access ops do not
+ * implement self-view of the HT host yet
+ */
+
+/*
+ * This function deals with some "special cases" devices.
+ *
+ * 0 -> No special case
+ * 1 -> Skip the device but act as if the access was successful
+ * (return 0xff's on reads, eventually, cache config space
+ * accesses in a later version)
+ * -1 -> Hide the device (unsuccessful access)
+ */
+static int u3_ht_skip_device(struct pci_controller *hose,
+ struct pci_bus *bus, unsigned int devfn)
+{
+ struct device_node *busdn, *dn;
+ int i;
+
+ /* We only allow config cycles to devices that are in OF device-tree
+ * as we are apparently having some weird things going on with some
+ * revs of K2 on recent G5s, except for the host bridge itself, which
+ * is missing from the tree but we know we can probe.
+ */
+ if (bus->self)
+ busdn = pci_device_to_OF_node(bus->self);
+ else if (devfn == 0)
+ return 0;
+ else
+ busdn = hose->dn;
+ for (dn = busdn->child; dn; dn = dn->sibling)
+ if (PCI_DN(dn) && PCI_DN(dn)->devfn == devfn)
+ break;
+ if (dn == NULL)
+ return -1;
+
+ /*
+ * When a device in K2 is powered down, we die on config
+ * cycle accesses. Fix that here.
+ */
+ for (i=0; i<2; i++)
+ if (k2_skiplist[i] == dn)
+ return 1;
+
+ return 0;
+}
+
+#define U3_HT_CFA0(devfn, off) \
+ ((((unsigned int)devfn) << 8) | offset)
+#define U3_HT_CFA1(bus, devfn, off) \
+ (U3_HT_CFA0(devfn, off) \
+ + (((unsigned int)bus) << 16) \
+ + 0x01000000UL)
+
+static void __iomem *u3_ht_cfg_access(struct pci_controller *hose, u8 bus,
+ u8 devfn, u8 offset, int *swap)
+{
+ *swap = 1;
+ if (bus == hose->first_busno) {
+ if (devfn != 0)
+ return hose->cfg_data + U3_HT_CFA0(devfn, offset);
+ *swap = 0;
+ return ((void __iomem *)hose->cfg_addr) + (offset << 2);
+ } else
+ return hose->cfg_data + U3_HT_CFA1(bus, devfn, offset);
+}
+
+static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose;
+ void __iomem *addr;
+ int swap;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x100)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = u3_ht_cfg_access(hose, bus->number, devfn, offset, &swap);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ switch (u3_ht_skip_device(hose, bus, devfn)) {
+ case 0:
+ break;
+ case 1:
+ switch (len) {
+ case 1:
+ *val = 0xff; break;
+ case 2:
+ *val = 0xffff; break;
+ default:
+ *val = 0xfffffffful; break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+ default:
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = swap ? in_le16(addr) : in_be16(addr);
+ break;
+ default:
+ *val = swap ? in_le32(addr) : in_be32(addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose;
+ void __iomem *addr;
+ int swap;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x100)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = u3_ht_cfg_access(hose, bus->number, devfn, offset, &swap);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ switch (u3_ht_skip_device(hose, bus, devfn)) {
+ case 0:
+ break;
+ case 1:
+ return PCIBIOS_SUCCESSFUL;
+ default:
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8(addr, val);
+ break;
+ case 2:
+ swap ? out_le16(addr, val) : out_be16(addr, val);
+ break;
+ default:
+ swap ? out_le32(addr, val) : out_be32(addr, val);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u3_ht_pci_ops =
+{
+ .read = u3_ht_read_config,
+ .write = u3_ht_write_config,
+};
+
+#define U4_PCIE_CFA0(devfn, off) \
+ ((1 << ((unsigned int)PCI_SLOT(dev_fn))) \
+ | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \
+ | ((((unsigned int)(off)) >> 8) << 28) \
+ | (((unsigned int)(off)) & 0xfcU))
+
+#define U4_PCIE_CFA1(bus, devfn, off) \
+ ((((unsigned int)(bus)) << 16) \
+ |(((unsigned int)(devfn)) << 8) \
+ | ((((unsigned int)(off)) >> 8) << 28) \
+ |(((unsigned int)(off)) & 0xfcU) \
+ |1UL)
+
+static void __iomem *u4_pcie_cfg_map_bus(struct pci_bus *bus,
+ unsigned int dev_fn,
+ int offset)
+{
+ struct pci_controller *hose;
+ unsigned int caddr;
+
+ if (offset >= 0x1000)
+ return NULL;
+
+ hose = pci_bus_to_host(bus);
+ if (!hose)
+ return NULL;
+
+ if (bus->number == hose->first_busno) {
+ caddr = U4_PCIE_CFA0(dev_fn, offset);
+ } else
+ caddr = U4_PCIE_CFA1(bus->number, dev_fn, offset);
+
+ /* Uninorth will return garbage if we don't read back the value ! */
+ do {
+ out_le32(hose->cfg_addr, caddr);
+ } while (in_le32(hose->cfg_addr) != caddr);
+
+ offset &= 0x03;
+ return hose->cfg_data + offset;
+}
+
+static struct pci_ops u4_pcie_pci_ops =
+{
+ .map_bus = u4_pcie_cfg_map_bus,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
+};
+
+static void pmac_pci_fixup_u4_of_node(struct pci_dev *dev)
+{
+ /* Apple's device-tree "hides" the root complex virtual P2P bridge
+ * on U4. However, Linux sees it, causing the PCI <-> OF matching
+ * code to fail to properly match devices below it. This works around
+ * it by setting the node of the bridge to point to the PHB node,
+ * which is not entirely correct but fixes the matching code and
+ * doesn't break anything else. It's also the simplest possible fix.
+ */
+ if (dev->dev.of_node == NULL)
+ dev->dev.of_node = pcibios_get_phb_of_node(dev->bus);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, 0x5b, pmac_pci_fixup_u4_of_node);
+
+#endif /* CONFIG_PPC64 */
+
+#ifdef CONFIG_PPC32
+/*
+ * For a bandit bridge, turn on cache coherency if necessary.
+ * N.B. we could clean this up using the hose ops directly.
+ */
+static void __init init_bandit(struct pci_controller *bp)
+{
+ unsigned int vendev, magic;
+ int rev;
+
+ /* read the word at offset 0 in config space for device 11 */
+ out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + PCI_VENDOR_ID);
+ udelay(2);
+ vendev = in_le32(bp->cfg_data);
+ if (vendev == (PCI_DEVICE_ID_APPLE_BANDIT << 16) +
+ PCI_VENDOR_ID_APPLE) {
+ /* read the revision id */
+ out_le32(bp->cfg_addr,
+ (1UL << BANDIT_DEVNUM) + PCI_REVISION_ID);
+ udelay(2);
+ rev = in_8(bp->cfg_data);
+ if (rev != BANDIT_REVID)
+ printk(KERN_WARNING
+ "Unknown revision %d for bandit\n", rev);
+ } else if (vendev != (BANDIT_DEVID_2 << 16) + PCI_VENDOR_ID_APPLE) {
+ printk(KERN_WARNING "bandit isn't? (%x)\n", vendev);
+ return;
+ }
+
+ /* read the word at offset 0x50 */
+ out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + BANDIT_MAGIC);
+ udelay(2);
+ magic = in_le32(bp->cfg_data);
+ if ((magic & BANDIT_COHERENT) != 0)
+ return;
+ magic |= BANDIT_COHERENT;
+ udelay(2);
+ out_le32(bp->cfg_data, magic);
+ printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n");
+}
+
+/*
+ * Tweak the PCI-PCI bridge chip on the blue & white G3s.
+ */
+static void __init init_p2pbridge(void)
+{
+ struct device_node *p2pbridge;
+ struct pci_controller* hose;
+ u8 bus, devfn;
+ u16 val;
+
+ /* XXX it would be better here to identify the specific
+ PCI-PCI bridge chip we have. */
+ p2pbridge = of_find_node_by_name(NULL, "pci-bridge");
+ if (p2pbridge == NULL
+ || p2pbridge->parent == NULL
+ || strcmp(p2pbridge->parent->name, "pci") != 0)
+ goto done;
+ if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) {
+ DBG("Can't find PCI infos for PCI<->PCI bridge\n");
+ goto done;
+ }
+ /* Warning: At this point, we have not yet renumbered all busses.
+ * So we must use OF walking to find out hose
+ */
+ hose = pci_find_hose_for_OF_device(p2pbridge);
+ if (!hose) {
+ DBG("Can't find hose for PCI<->PCI bridge\n");
+ goto done;
+ }
+ if (early_read_config_word(hose, bus, devfn,
+ PCI_BRIDGE_CONTROL, &val) < 0) {
+ printk(KERN_ERR "init_p2pbridge: couldn't read bridge"
+ " control\n");
+ goto done;
+ }
+ val &= ~PCI_BRIDGE_CTL_MASTER_ABORT;
+ early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val);
+done:
+ of_node_put(p2pbridge);
+}
+
+static void __init init_second_ohare(void)
+{
+ struct device_node *np = of_find_node_by_name(NULL, "pci106b,7");
+ unsigned char bus, devfn;
+ unsigned short cmd;
+
+ if (np == NULL)
+ return;
+
+ /* This must run before we initialize the PICs since the second
+ * ohare hosts a PIC that will be accessed there.
+ */
+ if (pci_device_from_OF_node(np, &bus, &devfn) == 0) {
+ struct pci_controller* hose =
+ pci_find_hose_for_OF_device(np);
+ if (!hose) {
+ printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
+ of_node_put(np);
+ return;
+ }
+ early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ cmd &= ~PCI_COMMAND_IO;
+ early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
+ }
+ has_second_ohare = 1;
+ of_node_put(np);
+}
+
+/*
+ * Some Apple desktop machines have a NEC PD720100A USB2 controller
+ * on the motherboard. Open Firmware, on these, will disable the
+ * EHCI part of it so it behaves like a pair of OHCI's. This fixup
+ * code re-enables it ;)
+ */
+static void __init fixup_nec_usb2(void)
+{
+ struct device_node *nec;
+
+ for_each_node_by_name(nec, "usb") {
+ struct pci_controller *hose;
+ u32 data;
+ const u32 *prop;
+ u8 bus, devfn;
+
+ prop = of_get_property(nec, "vendor-id", NULL);
+ if (prop == NULL)
+ continue;
+ if (0x1033 != *prop)
+ continue;
+ prop = of_get_property(nec, "device-id", NULL);
+ if (prop == NULL)
+ continue;
+ if (0x0035 != *prop)
+ continue;
+ prop = of_get_property(nec, "reg", NULL);
+ if (prop == NULL)
+ continue;
+ devfn = (prop[0] >> 8) & 0xff;
+ bus = (prop[0] >> 16) & 0xff;
+ if (PCI_FUNC(devfn) != 0)
+ continue;
+ hose = pci_find_hose_for_OF_device(nec);
+ if (!hose)
+ continue;
+ early_read_config_dword(hose, bus, devfn, 0xe4, &data);
+ if (data & 1UL) {
+ printk("Found NEC PD720100A USB2 chip with disabled"
+ " EHCI, fixing up...\n");
+ data &= ~1UL;
+ early_write_config_dword(hose, bus, devfn, 0xe4, data);
+ }
+ }
+}
+
+static void __init setup_bandit(struct pci_controller *hose,
+ struct resource *addr)
+{
+ hose->ops = &macrisc_pci_ops;
+ hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000);
+ init_bandit(hose);
+}
+
+static int __init setup_uninorth(struct pci_controller *hose,
+ struct resource *addr)
+{
+ pci_add_flags(PCI_REASSIGN_ALL_BUS);
+ has_uninorth = 1;
+ hose->ops = &macrisc_pci_ops;
+ hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000);
+ /* We "know" that the bridge at f2000000 has the PCI slots. */
+ return addr->start == 0xf2000000;
+}
+#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC64
+static void __init setup_u3_agp(struct pci_controller* hose)
+{
+ /* On G5, we move AGP up to high bus number so we don't need
+ * to reassign bus numbers for HT. If we ever have P2P bridges
+ * on AGP, we'll have to move pci_assign_all_busses to the
+ * pci_controller structure so we enable it for AGP and not for
+ * HT childs.
+ * We hard code the address because of the different size of
+ * the reg address cell, we shall fix that by killing struct
+ * reg_property and using some accessor functions instead
+ */
+ hose->first_busno = 0xf0;
+ hose->last_busno = 0xff;
+ has_uninorth = 1;
+ hose->ops = &macrisc_pci_ops;
+ hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+ u3_agp = hose;
+}
+
+static void __init setup_u4_pcie(struct pci_controller* hose)
+{
+ /* We currently only implement the "non-atomic" config space, to
+ * be optimised later.
+ */
+ hose->ops = &u4_pcie_pci_ops;
+ hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+
+ /* The bus contains a bridge from root -> device, we need to
+ * make it visible on bus 0 so that we pick the right type
+ * of config cycles. If we didn't, we would have to force all
+ * config cycles to be type 1. So we override the "bus-range"
+ * property here
+ */
+ hose->first_busno = 0x00;
+ hose->last_busno = 0xff;
+}
+
+static void __init parse_region_decode(struct pci_controller *hose,
+ u32 decode)
+{
+ unsigned long base, end, next = -1;
+ int i, cur = -1;
+
+ /* Iterate through all bits. We ignore the last bit as this region is
+ * reserved for the ROM among other niceties
+ */
+ for (i = 0; i < 31; i++) {
+ if ((decode & (0x80000000 >> i)) == 0)
+ continue;
+ if (i < 16) {
+ base = 0xf0000000 | (((u32)i) << 24);
+ end = base + 0x00ffffff;
+ } else {
+ base = ((u32)i-16) << 28;
+ end = base + 0x0fffffff;
+ }
+ if (base != next) {
+ if (++cur >= 3) {
+ printk(KERN_WARNING "PCI: Too many ranges !\n");
+ break;
+ }
+ hose->mem_resources[cur].flags = IORESOURCE_MEM;
+ hose->mem_resources[cur].name = hose->dn->full_name;
+ hose->mem_resources[cur].start = base;
+ hose->mem_resources[cur].end = end;
+ hose->mem_offset[cur] = 0;
+ DBG(" %d: 0x%08lx-0x%08lx\n", cur, base, end);
+ } else {
+ DBG(" : -0x%08lx\n", end);
+ hose->mem_resources[cur].end = end;
+ }
+ next = end + 1;
+ }
+}
+
+static void __init setup_u3_ht(struct pci_controller* hose)
+{
+ struct device_node *np = hose->dn;
+ struct resource cfg_res, self_res;
+ u32 decode;
+
+ hose->ops = &u3_ht_pci_ops;
+
+ /* Get base addresses from OF tree
+ */
+ if (of_address_to_resource(np, 0, &cfg_res) ||
+ of_address_to_resource(np, 1, &self_res)) {
+ printk(KERN_ERR "PCI: Failed to get U3/U4 HT resources !\n");
+ return;
+ }
+
+ /* Map external cfg space access into cfg_data and self registers
+ * into cfg_addr
+ */
+ hose->cfg_data = ioremap(cfg_res.start, 0x02000000);
+ hose->cfg_addr = ioremap(self_res.start, resource_size(&self_res));
+
+ /*
+ * /ht node doesn't expose a "ranges" property, we read the register
+ * that controls the decoding logic and use that for memory regions.
+ * The IO region is hard coded since it is fixed in HW as well.
+ */
+ hose->io_base_phys = 0xf4000000;
+ hose->pci_io_size = 0x00400000;
+ hose->io_resource.name = np->full_name;
+ hose->io_resource.start = 0;
+ hose->io_resource.end = 0x003fffff;
+ hose->io_resource.flags = IORESOURCE_IO;
+ hose->first_busno = 0;
+ hose->last_busno = 0xef;
+
+ /* Note: fix offset when cfg_addr becomes a void * */
+ decode = in_be32(hose->cfg_addr + 0x80);
+
+ DBG("PCI: Apple HT bridge decode register: 0x%08x\n", decode);
+
+ /* NOTE: The decode register setup is a bit weird... region
+ * 0xf8000000 for example is marked as enabled in there while it's
+ & actually the memory controller registers.
+ * That means that we are incorrectly attributing it to HT.
+ *
+ * In a similar vein, region 0xf4000000 is actually the HT IO space but
+ * also marked as enabled in here and 0xf9000000 is used by some other
+ * internal bits of the northbridge.
+ *
+ * Unfortunately, we can't just mask out those bit as we would end
+ * up with more regions than we can cope (linux can only cope with
+ * 3 memory regions for a PHB at this stage).
+ *
+ * So for now, we just do a little hack. We happen to -know- that
+ * Apple firmware doesn't assign things below 0xfa000000 for that
+ * bridge anyway so we mask out all bits we don't want.
+ */
+ decode &= 0x003fffff;
+
+ /* Now parse the resulting bits and build resources */
+ parse_region_decode(hose, decode);
+}
+#endif /* CONFIG_PPC64 */
+
+/*
+ * We assume that if we have a G3 powermac, we have one bridge called
+ * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise,
+ * if we have one or more bandit or chaos bridges, we don't have a MPC106.
+ */
+static int __init pmac_add_bridge(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ struct resource rsrc;
+ char *disp_name;
+ const int *bus_range;
+ int primary = 1;
+
+ DBG("Adding PCI host bridge %pOF\n", dev);
+
+ /* Fetch host bridge registers address */
+ of_address_to_resource(dev, 0, &rsrc);
+
+ /* Get bus range if any */
+ bus_range = of_get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
+ " bus 0\n", dev);
+ }
+
+ hose = pcibios_alloc_controller(dev);
+ if (!hose)
+ return -ENOMEM;
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+ hose->controller_ops = pmac_pci_controller_ops;
+
+ disp_name = NULL;
+
+ /* 64 bits only bridges */
+#ifdef CONFIG_PPC64
+ if (of_device_is_compatible(dev, "u3-agp")) {
+ setup_u3_agp(hose);
+ disp_name = "U3-AGP";
+ primary = 0;
+ } else if (of_device_is_compatible(dev, "u3-ht")) {
+ setup_u3_ht(hose);
+ disp_name = "U3-HT";
+ primary = 1;
+ } else if (of_device_is_compatible(dev, "u4-pcie")) {
+ setup_u4_pcie(hose);
+ disp_name = "U4-PCIE";
+ primary = 0;
+ }
+ printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number:"
+ " %d->%d\n", disp_name, hose->first_busno, hose->last_busno);
+#endif /* CONFIG_PPC64 */
+
+ /* 32 bits only bridges */
+#ifdef CONFIG_PPC32
+ if (of_device_is_compatible(dev, "uni-north")) {
+ primary = setup_uninorth(hose, &rsrc);
+ disp_name = "UniNorth";
+ } else if (strcmp(dev->name, "pci") == 0) {
+ /* XXX assume this is a mpc106 (grackle) */
+ setup_grackle(hose);
+ disp_name = "Grackle (MPC106)";
+ } else if (strcmp(dev->name, "bandit") == 0) {
+ setup_bandit(hose, &rsrc);
+ disp_name = "Bandit";
+ } else if (strcmp(dev->name, "chaos") == 0) {
+ setup_chaos(hose, &rsrc);
+ disp_name = "Chaos";
+ primary = 0;
+ }
+ printk(KERN_INFO "Found %s PCI host bridge at 0x%016llx. "
+ "Firmware bus number: %d->%d\n",
+ disp_name, (unsigned long long)rsrc.start, hose->first_busno,
+ hose->last_busno);
+#endif /* CONFIG_PPC32 */
+
+ DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+ hose, hose->cfg_addr, hose->cfg_data);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(hose, dev, primary);
+
+ /* Fixup "bus-range" OF property */
+ fixup_bus_range(dev);
+
+ return 0;
+}
+
+void pmac_pci_irq_fixup(struct pci_dev *dev)
+{
+#ifdef CONFIG_PPC32
+ /* Fixup interrupt for the modem/ethernet combo controller.
+ * on machines with a second ohare chip.
+ * The number in the device tree (27) is bogus (correct for
+ * the ethernet-only board but not the combo ethernet/modem
+ * board). The real interrupt is 28 on the second controller
+ * -> 28+32 = 60.
+ */
+ if (has_second_ohare &&
+ dev->vendor == PCI_VENDOR_ID_DEC &&
+ dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS) {
+ dev->irq = irq_create_mapping(NULL, 60);
+ irq_set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW);
+ }
+#endif /* CONFIG_PPC32 */
+}
+
+#ifdef CONFIG_PPC64
+static int pmac_pci_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ struct pci_controller *hose = pci_bus_to_host(bridge->bus);
+ struct device_node *np, *child;
+
+ if (hose != u3_agp)
+ return 0;
+
+ /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+ * assume there is no P2P bridge on the AGP bus, which should be a
+ * safe assumptions for now. We should do something better in the
+ * future though
+ */
+ np = hose->dn;
+ PCI_DN(np)->busno = 0xf0;
+ for_each_child_of_node(np, child)
+ PCI_DN(child)->busno = 0xf0;
+
+ return 0;
+}
+#endif /* CONFIG_PPC64 */
+
+void __init pmac_pci_init(void)
+{
+ struct device_node *np, *root;
+ struct device_node *ht __maybe_unused = NULL;
+
+ pci_set_flags(PCI_CAN_SKIP_ISA_ALIGN);
+
+ root = of_find_node_by_path("/");
+ if (root == NULL) {
+ printk(KERN_CRIT "pmac_pci_init: can't find root "
+ "of device tree\n");
+ return;
+ }
+ for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
+ if (np->name == NULL)
+ continue;
+ if (strcmp(np->name, "bandit") == 0
+ || strcmp(np->name, "chaos") == 0
+ || strcmp(np->name, "pci") == 0) {
+ if (pmac_add_bridge(np) == 0)
+ of_node_get(np);
+ }
+ if (strcmp(np->name, "ht") == 0) {
+ of_node_get(np);
+ ht = np;
+ }
+ }
+ of_node_put(root);
+
+#ifdef CONFIG_PPC64
+ /* Probe HT last as it relies on the agp resources to be already
+ * setup
+ */
+ if (ht && pmac_add_bridge(ht) != 0)
+ of_node_put(ht);
+
+ ppc_md.pcibios_root_bridge_prepare = pmac_pci_root_bridge_prepare;
+ /* pmac_check_ht_link(); */
+
+#else /* CONFIG_PPC64 */
+ init_p2pbridge();
+ init_second_ohare();
+ fixup_nec_usb2();
+
+ /* We are still having some issues with the Xserve G4, enabling
+ * some offset between bus number and domains for now when we
+ * assign all busses should help for now
+ */
+ if (pci_has_flag(PCI_REASSIGN_ALL_BUS))
+ pcibios_assign_bus_offset = 0x10;
+#endif
+}
+
+#ifdef CONFIG_PPC32
+static bool pmac_pci_enable_device_hook(struct pci_dev *dev)
+{
+ struct device_node* node;
+ int updatecfg = 0;
+ int uninorth_child;
+
+ node = pci_device_to_OF_node(dev);
+
+ /* We don't want to enable USB controllers absent from the OF tree
+ * (iBook second controller)
+ */
+ if (dev->vendor == PCI_VENDOR_ID_APPLE
+ && dev->class == PCI_CLASS_SERIAL_USB_OHCI
+ && !node) {
+ printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n",
+ pci_name(dev));
+ return false;
+ }
+
+ if (!node)
+ return true;
+
+ uninorth_child = node->parent &&
+ of_device_is_compatible(node->parent, "uni-north");
+
+ /* Firewire & GMAC were disabled after PCI probe, the driver is
+ * claiming them, we must re-enable them now.
+ */
+ if (uninorth_child && !strcmp(node->name, "firewire") &&
+ (of_device_is_compatible(node, "pci106b,18") ||
+ of_device_is_compatible(node, "pci106b,30") ||
+ of_device_is_compatible(node, "pci11c1,5811"))) {
+ pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1);
+ pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1);
+ updatecfg = 1;
+ }
+ if (uninorth_child && !strcmp(node->name, "ethernet") &&
+ of_device_is_compatible(node, "gmac")) {
+ pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1);
+ updatecfg = 1;
+ }
+
+ /*
+ * Fixup various header fields on 32 bits. We don't do that on
+ * 64 bits as some of these have strange values behind the HT
+ * bridge and we must not, for example, enable MWI or set the
+ * cache line size on them.
+ */
+ if (updatecfg) {
+ u16 cmd;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
+ | PCI_COMMAND_INVALIDATE;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16);
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+ L1_CACHE_BYTES >> 2);
+ }
+
+ return true;
+}
+
+static void pmac_pci_fixup_ohci(struct pci_dev *dev)
+{
+ struct device_node *node = pci_device_to_OF_node(dev);
+
+ /* We don't want to assign resources to USB controllers
+ * absent from the OF tree (iBook second controller)
+ */
+ if (dev->class == PCI_CLASS_SERIAL_USB_OHCI && !node)
+ dev->resource[0].flags = 0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_ANY_ID, pmac_pci_fixup_ohci);
+
+/* We power down some devices after they have been probed. They'll
+ * be powered back on later on
+ */
+void __init pmac_pcibios_after_init(void)
+{
+ struct device_node* nd;
+
+ for_each_node_by_name(nd, "firewire") {
+ if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") ||
+ of_device_is_compatible(nd, "pci106b,30") ||
+ of_device_is_compatible(nd, "pci11c1,5811"))
+ && of_device_is_compatible(nd->parent, "uni-north")) {
+ pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0);
+ pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0);
+ }
+ }
+ for_each_node_by_name(nd, "ethernet") {
+ if (nd->parent && of_device_is_compatible(nd, "gmac")
+ && of_device_is_compatible(nd->parent, "uni-north"))
+ pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0);
+ }
+}
+
+static void pmac_pci_fixup_cardbus(struct pci_dev *dev)
+{
+ if (!machine_is(powermac))
+ return;
+ /*
+ * Fix the interrupt routing on the various cardbus bridges
+ * used on powerbooks
+ */
+ if (dev->vendor != PCI_VENDOR_ID_TI)
+ return;
+ if (dev->device == PCI_DEVICE_ID_TI_1130 ||
+ dev->device == PCI_DEVICE_ID_TI_1131) {
+ u8 val;
+ /* Enable PCI interrupt */
+ if (pci_read_config_byte(dev, 0x91, &val) == 0)
+ pci_write_config_byte(dev, 0x91, val | 0x30);
+ /* Disable ISA interrupt mode */
+ if (pci_read_config_byte(dev, 0x92, &val) == 0)
+ pci_write_config_byte(dev, 0x92, val & ~0x06);
+ }
+ if (dev->device == PCI_DEVICE_ID_TI_1210 ||
+ dev->device == PCI_DEVICE_ID_TI_1211 ||
+ dev->device == PCI_DEVICE_ID_TI_1410 ||
+ dev->device == PCI_DEVICE_ID_TI_1510) {
+ u8 val;
+ /* 0x8c == TI122X_IRQMUX, 2 says to route the INTA
+ signal out the MFUNC0 pin */
+ if (pci_read_config_byte(dev, 0x8c, &val) == 0)
+ pci_write_config_byte(dev, 0x8c, (val & ~0x0f) | 2);
+ /* Disable ISA interrupt mode */
+ if (pci_read_config_byte(dev, 0x92, &val) == 0)
+ pci_write_config_byte(dev, 0x92, val & ~0x06);
+ }
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_ANY_ID, pmac_pci_fixup_cardbus);
+
+static void pmac_pci_fixup_pciata(struct pci_dev *dev)
+{
+ u8 progif = 0;
+
+ /*
+ * On PowerMacs, we try to switch any PCI ATA controller to
+ * fully native mode
+ */
+ if (!machine_is(powermac))
+ return;
+
+ /* Some controllers don't have the class IDE */
+ if (dev->vendor == PCI_VENDOR_ID_PROMISE)
+ switch(dev->device) {
+ case PCI_DEVICE_ID_PROMISE_20246:
+ case PCI_DEVICE_ID_PROMISE_20262:
+ case PCI_DEVICE_ID_PROMISE_20263:
+ case PCI_DEVICE_ID_PROMISE_20265:
+ case PCI_DEVICE_ID_PROMISE_20267:
+ case PCI_DEVICE_ID_PROMISE_20268:
+ case PCI_DEVICE_ID_PROMISE_20269:
+ case PCI_DEVICE_ID_PROMISE_20270:
+ case PCI_DEVICE_ID_PROMISE_20271:
+ case PCI_DEVICE_ID_PROMISE_20275:
+ case PCI_DEVICE_ID_PROMISE_20276:
+ case PCI_DEVICE_ID_PROMISE_20277:
+ goto good;
+ }
+ /* Others, check PCI class */
+ if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
+ return;
+ good:
+ pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
+ if ((progif & 5) != 5) {
+ printk(KERN_INFO "PCI: %s Forcing PCI IDE into native mode\n",
+ pci_name(dev));
+ (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
+ if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
+ (progif & 5) != 5)
+ printk(KERN_ERR "Rewrite of PROGIF failed !\n");
+ else {
+ /* Clear IO BARs, they will be reassigned */
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, 0);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_3, 0);
+ }
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata);
+#endif /* CONFIG_PPC32 */
+
+/*
+ * Disable second function on K2-SATA, it's broken
+ * and disable IO BARs on first one
+ */
+static void fixup_k2_sata(struct pci_dev* dev)
+{
+ int i;
+ u16 cmd;
+
+ if (PCI_FUNC(dev->devfn) > 0) {
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ for (i = 0; i < 6; i++) {
+ dev->resource[i].start = dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i,
+ 0);
+ }
+ } else {
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd &= ~PCI_COMMAND_IO;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ for (i = 0; i < 5; i++) {
+ dev->resource[i].start = dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i,
+ 0);
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata);
+
+/*
+ * On U4 (aka CPC945) the PCIe root complex "P2P" bridge resource ranges aren't
+ * configured by the firmware. The bridge itself seems to ignore them but it
+ * causes problems with Linux which then re-assigns devices below the bridge,
+ * thus changing addresses of those devices from what was in the device-tree,
+ * which sucks when those are video cards using offb
+ *
+ * We could just mark it transparent but I prefer fixing up the resources to
+ * properly show what's going on here, as I have some doubts about having them
+ * badly configured potentially being an issue for DMA.
+ *
+ * We leave PIO alone, it seems to be fine
+ *
+ * Oh and there's another funny bug. The OF properties advertize the region
+ * 0xf1000000..0xf1ffffff as being forwarded as memory space. But that's
+ * actually not true, this region is the memory mapped config space. So we
+ * also need to filter it out or we'll map things in the wrong place.
+ */
+static void fixup_u4_pcie(struct pci_dev* dev)
+{
+ struct pci_controller *host = pci_bus_to_host(dev->bus);
+ struct resource *region = NULL;
+ u32 reg;
+ int i;
+
+ /* Only do that on PowerMac */
+ if (!machine_is(powermac))
+ return;
+
+ /* Find the largest MMIO region */
+ for (i = 0; i < 3; i++) {
+ struct resource *r = &host->mem_resources[i];
+ if (!(r->flags & IORESOURCE_MEM))
+ continue;
+ /* Skip the 0xf0xxxxxx..f2xxxxxx regions, we know they
+ * are reserved by HW for other things
+ */
+ if (r->start >= 0xf0000000 && r->start < 0xf3000000)
+ continue;
+ if (!region || resource_size(r) > resource_size(region))
+ region = r;
+ }
+ /* Nothing found, bail */
+ if (!region)
+ return;
+
+ /* Print things out */
+ printk(KERN_INFO "PCI: Fixup U4 PCIe bridge range: %pR\n", region);
+
+ /* Fixup bridge config space. We know it's a Mac, resource aren't
+ * offset so let's just blast them as-is. We also know that they
+ * fit in 32 bits
+ */
+ reg = ((region->start >> 16) & 0xfff0) | (region->end & 0xfff00000);
+ pci_write_config_dword(dev, PCI_MEMORY_BASE, reg);
+ pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0);
+ pci_write_config_dword(dev, PCI_PREF_LIMIT_UPPER32, 0);
+ pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_U4_PCIE, fixup_u4_pcie);
+
+#ifdef CONFIG_PPC64
+static int pmac_pci_probe_mode(struct pci_bus *bus)
+{
+ struct device_node *node = pci_bus_to_OF_node(bus);
+
+ /* We need to use normal PCI probing for the AGP bus,
+ * since the device for the AGP bridge isn't in the tree.
+ * Same for the PCIe host on U4 and the HT host bridge.
+ */
+ if (bus->self == NULL && (of_device_is_compatible(node, "u3-agp") ||
+ of_device_is_compatible(node, "u4-pcie") ||
+ of_device_is_compatible(node, "u3-ht")))
+ return PCI_PROBE_NORMAL;
+ return PCI_PROBE_DEVTREE;
+}
+#endif /* CONFIG_PPC64 */
+
+struct pci_controller_ops pmac_pci_controller_ops = {
+#ifdef CONFIG_PPC64
+ .probe_mode = pmac_pci_probe_mode,
+#endif
+#ifdef CONFIG_PPC32
+ .enable_device_hook = pmac_pci_enable_device_hook,
+#endif
+};
+
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 06:45:26 +0000