diff options
Diffstat (limited to 'arch/powerpc/sysdev/tsi108_pci.c')
| -rw-r--r-- | arch/powerpc/sysdev/tsi108_pci.c | 438 |
1 files changed, 438 insertions, 0 deletions
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c new file mode 100644 index 000000000..28ff1f53c --- /dev/null +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -0,0 +1,438 @@ +/* + * Common routines for Tundra Semiconductor TSI108 host bridge. + * + * 2004-2005 (c) Tundra Semiconductor Corp. + * Author: Alex Bounine (alexandreb@tundra.com) + * Author: Roy Zang (tie-fei.zang@freescale.com) + * Add pci interrupt router host + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <linux/uaccess.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/tsi108.h> +#include <asm/tsi108_pci.h> +#include <asm/tsi108_irq.h> +#include <asm/prom.h> + +#undef DEBUG +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#define tsi_mk_config_addr(bus, devfunc, offset) \ + ((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base) + +u32 tsi108_pci_cfg_base; +static u32 tsi108_pci_cfg_phys; +u32 tsi108_csr_vir_base; +static struct irq_domain *pci_irq_host; + +extern u32 get_vir_csrbase(void); +extern u32 tsi108_read_reg(u32 reg_offset); +extern void tsi108_write_reg(u32 reg_offset, u32 val); + +int +tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc, + int offset, int len, u32 val) +{ + volatile unsigned char *cfg_addr; + struct pci_controller *hose = pci_bus_to_host(bus); + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(hose, bus->number, devfunc)) + return PCIBIOS_DEVICE_NOT_FOUND; + + cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number, + devfunc, offset) | + (offset & 0x03)); + +#ifdef DEBUG + printk("PCI CFG write : "); + printk("%d:0x%x:0x%x ", bus->number, devfunc, offset); + printk("%d ADDR=0x%08x ", len, (uint) cfg_addr); + printk("data = 0x%08x\n", val); +#endif + + switch (len) { + case 1: + out_8((u8 *) cfg_addr, val); + break; + case 2: + out_le16((u16 *) cfg_addr, val); + break; + default: + out_le32((u32 *) cfg_addr, val); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +void tsi108_clear_pci_error(u32 pci_cfg_base) +{ + u32 err_stat, err_addr, pci_stat; + + /* + * Quietly clear PB and PCI error flags set as result + * of PCI/X configuration read requests. + */ + + /* Read PB Error Log Registers */ + + err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS); + err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR); + + if (err_stat & TSI108_PB_ERRCS_ES) { + /* Clear error flag */ + tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS, + TSI108_PB_ERRCS_ES); + + /* Clear read error reported in PB_ISR */ + tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR, + TSI108_PB_ISR_PBS_RD_ERR); + + /* Clear PCI/X bus cfg errors if applicable */ + if ((err_addr & 0xFF000000) == pci_cfg_base) { + pci_stat = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR, + pci_stat); + } + } + + return; +} + +#define __tsi108_read_pci_config(x, addr, op) \ + __asm__ __volatile__( \ + " "op" %0,0,%1\n" \ + "1: eieio\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,-1\n" \ + " b 2b\n" \ + ".previous\n" \ + EX_TABLE(1b, 3b) \ + : "=r"(x) : "r"(addr)) + +int +tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 * val) +{ + volatile unsigned char *cfg_addr; + struct pci_controller *hose = pci_bus_to_host(bus); + u32 temp; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(hose, bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number, + devfn, + offset) | (offset & + 0x03)); + + switch (len) { + case 1: + __tsi108_read_pci_config(temp, cfg_addr, "lbzx"); + break; + case 2: + __tsi108_read_pci_config(temp, cfg_addr, "lhbrx"); + break; + default: + __tsi108_read_pci_config(temp, cfg_addr, "lwbrx"); + break; + } + + *val = temp; + +#ifdef DEBUG + if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) { + printk("PCI CFG read : "); + printk("%d:0x%x:0x%x ", bus->number, devfn, offset); + printk("%d ADDR=0x%08x ", len, (uint) cfg_addr); + printk("data = 0x%x\n", *val); + } +#endif + return PCIBIOS_SUCCESSFUL; +} + +void tsi108_clear_pci_cfg_error(void) +{ + tsi108_clear_pci_error(tsi108_pci_cfg_phys); +} + +static struct pci_ops tsi108_direct_pci_ops = { + .read = tsi108_direct_read_config, + .write = tsi108_direct_write_config, +}; + +int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary) +{ + int len; + struct pci_controller *hose; + struct resource rsrc; + const int *bus_range; + int has_address = 0; + + /* PCI Config mapping */ + tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE); + tsi108_pci_cfg_phys = cfg_phys; + DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__, + tsi108_pci_cfg_base); + + /* Fetch host bridge registers address */ + has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); + + /* Get bus range if any */ + bus_range = of_get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %pOF, assume" + " bus 0\n", dev); + } + + hose = pcibios_alloc_controller(dev); + + if (!hose) { + printk("PCI Host bridge init failed\n"); + return -ENOMEM; + } + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + (hose)->ops = &tsi108_direct_pci_ops; + + printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. " + "Firmware bus number: %d->%d\n", + rsrc.start, hose->first_busno, hose->last_busno); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + return 0; +} + +/* + * Low level utility functions + */ + +static void tsi108_pci_int_mask(u_int irq) +{ + u_int irp_cfg; + int int_line = (irq - IRQ_PCI_INTAD_BASE); + + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + irp_cfg |= (1 << int_line); /* INTx_DIR = output */ + irp_cfg &= ~(3 << (8 + (int_line * 2))); /* INTx_TYPE = unused */ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg); + mb(); + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); +} + +static void tsi108_pci_int_unmask(u_int irq) +{ + u_int irp_cfg; + int int_line = (irq - IRQ_PCI_INTAD_BASE); + + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + irp_cfg &= ~(1 << int_line); + irp_cfg |= (3 << (8 + (int_line * 2))); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg); + mb(); +} + +static void init_pci_source(void) +{ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, + 0x0000ff00); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + TSI108_PCI_IRP_ENABLE_P_INT); + mb(); +} + +static inline unsigned int get_pci_source(void) +{ + u_int temp = 0; + int irq = -1; + int i; + u_int pci_irp_stat; + static int mask = 0; + + /* Read PCI/X block interrupt status register */ + pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT); + mb(); + + if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) { + /* Process Interrupt from PCI bus INTA# - INTD# lines */ + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + + TSI108_PCI_IRP_INTAD) & 0xf; + mb(); + for (i = 0; i < 4; i++, mask++) { + if (temp & (1 << mask % 4)) { + irq = IRQ_PCI_INTA + mask % 4; + mask++; + break; + } + } + + /* Disable interrupts from PCI block */ + temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + temp & ~TSI108_PCI_IRP_ENABLE_P_INT); + mb(); + (void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + mb(); + } +#ifdef DEBUG + else { + printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n"); + pci_irp_stat = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD); + mb(); + printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + printk("cfg_ctl=0x%08x ", temp); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + mb(); + printk("irp_enable=0x%08x\n", temp); + } +#endif /* end of DEBUG */ + + return irq; +} + + +/* + * Linux descriptor level callbacks + */ + +static void tsi108_pci_irq_unmask(struct irq_data *d) +{ + tsi108_pci_int_unmask(d->irq); + + /* Enable interrupts from PCI block */ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + tsi108_read_reg(TSI108_PCI_OFFSET + + TSI108_PCI_IRP_ENABLE) | + TSI108_PCI_IRP_ENABLE_P_INT); + mb(); +} + +static void tsi108_pci_irq_mask(struct irq_data *d) +{ + tsi108_pci_int_mask(d->irq); +} + +static void tsi108_pci_irq_ack(struct irq_data *d) +{ + tsi108_pci_int_mask(d->irq); +} + +/* + * Interrupt controller descriptor for cascaded PCI interrupt controller. + */ + +static struct irq_chip tsi108_pci_irq = { + .name = "tsi108_PCI_int", + .irq_mask = tsi108_pci_irq_mask, + .irq_ack = tsi108_pci_irq_ack, + .irq_unmask = tsi108_pci_irq_unmask, +}; + +static int pci_irq_host_xlate(struct irq_domain *h, struct device_node *ct, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + *out_hwirq = intspec[0]; + *out_flags = IRQ_TYPE_LEVEL_HIGH; + return 0; +} + +static int pci_irq_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ unsigned int irq; + DBG("%s(%d, 0x%lx)\n", __func__, virq, hw); + if ((virq >= 1) && (virq <= 4)){ + irq = virq + IRQ_PCI_INTAD_BASE - 1; + irq_set_status_flags(irq, IRQ_LEVEL); + irq_set_chip(irq, &tsi108_pci_irq); + } + return 0; +} + +static const struct irq_domain_ops pci_irq_domain_ops = { + .map = pci_irq_host_map, + .xlate = pci_irq_host_xlate, +}; + +/* + * Exported functions + */ + +/* + * The Tsi108 PCI interrupts initialization routine. + * + * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block + * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the + * PCI block has to be treated as a cascaded interrupt controller connected + * to the MPIC. + */ + +void __init tsi108_pci_int_init(struct device_node *node) +{ + DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); + + pci_irq_host = irq_domain_add_legacy_isa(node, &pci_irq_domain_ops, NULL); + if (pci_irq_host == NULL) { + printk(KERN_ERR "pci_irq_host: failed to allocate irq domain!\n"); + return; + } + + init_pci_source(); +} + +void tsi108_irq_cascade(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned int cascade_irq = get_pci_source(); + + if (cascade_irq) + generic_handle_irq(cascade_irq); + + chip->irq_eoi(&desc->irq_data); +} |