summaryrefslogtreecommitdiffstats
path: root/arch/sh
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh')
-rw-r--r--arch/sh/Kconfig1
-rw-r--r--arch/sh/Kconfig.debug11
-rw-r--r--arch/sh/drivers/dma/dma-sh.c37
-rw-r--r--arch/sh/include/asm/bugs.h78
-rw-r--r--arch/sh/include/asm/processor.h2
-rw-r--r--arch/sh/kernel/cpu/sh2/probe.c2
-rw-r--r--arch/sh/kernel/idle.c1
-rw-r--r--arch/sh/kernel/setup.c55
8 files changed, 95 insertions, 92 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 1fb7b6d72..63e00320e 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
config SUPERH
def_bool y
+ select ARCH_HAS_CPU_FINALIZE_INIT
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_MIGHT_HAVE_PC_PARPORT
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 71acd3d9b..dfc784f89 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -26,6 +26,17 @@ config STACK_DEBUG
every function call and will therefore incur a major
performance hit. Most users should say N.
+config EARLY_PRINTK
+ bool "Early printk"
+ depends on SH_STANDARD_BIOS
+ help
+ Say Y here to redirect kernel printk messages to the serial port
+ used by the SH-IPL bootloader, starting very early in the boot
+ process and ending when the kernel's serial console is initialised.
+ This option is only useful while porting the kernel to a new machine,
+ when the kernel may crash or hang before the serial console is
+ initialised. If unsure, say N.
+
config 4KSTACKS
bool "Use 4Kb for kernel stacks instead of 8Kb"
depends on DEBUG_KERNEL && (MMU || BROKEN) && !PAGE_SIZE_64KB
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index afde2a7d3..e0679d8a9 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -22,6 +22,18 @@
#include <cpu/dma.h>
/*
+ * Some of the SoCs feature two DMAC modules. In such a case, the channels are
+ * distributed equally among them.
+ */
+#ifdef SH_DMAC_BASE1
+#define SH_DMAC_NR_MD_CH (CONFIG_NR_ONCHIP_DMA_CHANNELS / 2)
+#else
+#define SH_DMAC_NR_MD_CH CONFIG_NR_ONCHIP_DMA_CHANNELS
+#endif
+
+#define SH_DMAC_CH_SZ 0x10
+
+/*
* Define the default configuration for dual address memory-memory transfer.
* The 0x400 value represents auto-request, external->external.
*/
@@ -32,7 +44,7 @@ static unsigned long dma_find_base(unsigned int chan)
unsigned long base = SH_DMAC_BASE0;
#ifdef SH_DMAC_BASE1
- if (chan >= 6)
+ if (chan >= SH_DMAC_NR_MD_CH)
base = SH_DMAC_BASE1;
#endif
@@ -43,13 +55,13 @@ static unsigned long dma_base_addr(unsigned int chan)
{
unsigned long base = dma_find_base(chan);
- /* Normalize offset calculation */
- if (chan >= 9)
- chan -= 6;
- if (chan >= 4)
- base += 0x10;
+ chan = (chan % SH_DMAC_NR_MD_CH) * SH_DMAC_CH_SZ;
+
+ /* DMAOR is placed inside the channel register space. Step over it. */
+ if (chan >= DMAOR)
+ base += SH_DMAC_CH_SZ;
- return base + (chan * 0x10);
+ return base + chan;
}
#ifdef CONFIG_SH_DMA_IRQ_MULTI
@@ -253,12 +265,11 @@ static int sh_dmac_get_dma_residue(struct dma_channel *chan)
#define NR_DMAOR 1
#endif
-/*
- * DMAOR bases are broken out amongst channel groups. DMAOR0 manages
- * channels 0 - 5, DMAOR1 6 - 11 (optional).
- */
-#define dmaor_read_reg(n) __raw_readw(dma_find_base((n)*6))
-#define dmaor_write_reg(n, data) __raw_writew(data, dma_find_base(n)*6)
+#define dmaor_read_reg(n) __raw_readw(dma_find_base((n) * \
+ SH_DMAC_NR_MD_CH) + DMAOR)
+#define dmaor_write_reg(n, data) __raw_writew(data, \
+ dma_find_base((n) * \
+ SH_DMAC_NR_MD_CH) + DMAOR)
static inline int dmaor_reset(int no)
{
diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h
deleted file mode 100644
index 030df56bf..000000000
--- a/arch/sh/include/asm/bugs.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BUGS_H
-#define __ASM_SH_BUGS_H
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- * void check_bugs(void);
- */
-
-/*
- * I don't know of any Super-H bugs yet.
- */
-
-#include <asm/processor.h>
-
-extern void select_idle_routine(void);
-
-static void __init check_bugs(void)
-{
- extern unsigned long loops_per_jiffy;
- char *p = &init_utsname()->machine[2]; /* "sh" */
-
- select_idle_routine();
-
- current_cpu_data.loops_per_jiffy = loops_per_jiffy;
-
- switch (current_cpu_data.family) {
- case CPU_FAMILY_SH2:
- *p++ = '2';
- break;
- case CPU_FAMILY_SH2A:
- *p++ = '2';
- *p++ = 'a';
- break;
- case CPU_FAMILY_SH3:
- *p++ = '3';
- break;
- case CPU_FAMILY_SH4:
- *p++ = '4';
- break;
- case CPU_FAMILY_SH4A:
- *p++ = '4';
- *p++ = 'a';
- break;
- case CPU_FAMILY_SH4AL_DSP:
- *p++ = '4';
- *p++ = 'a';
- *p++ = 'l';
- *p++ = '-';
- *p++ = 'd';
- *p++ = 's';
- *p++ = 'p';
- break;
- case CPU_FAMILY_SH5:
- *p++ = '6';
- *p++ = '4';
- break;
- case CPU_FAMILY_UNKNOWN:
- /*
- * Specifically use CPU_FAMILY_UNKNOWN rather than
- * default:, so we're able to have the compiler whine
- * about unhandled enumerations.
- */
- break;
- }
-
- printk("CPU: %s\n", get_cpu_subtype(&current_cpu_data));
-
-#ifndef __LITTLE_ENDIAN__
- /* 'eb' means 'Endian Big' */
- *p++ = 'e';
- *p++ = 'b';
-#endif
- *p = '\0';
-}
-#endif /* __ASM_SH_BUGS_H */
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index 6fbf8c80e..386786b15 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -173,6 +173,8 @@ extern unsigned int instruction_size(unsigned int insn);
#define instruction_size(insn) (4)
#endif
+void select_idle_routine(void);
+
#endif /* __ASSEMBLY__ */
#ifdef CONFIG_SUPERH32
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
index a5bd03642..75dcb1d6b 100644
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ b/arch/sh/kernel/cpu/sh2/probe.c
@@ -24,7 +24,7 @@ static int __init scan_cache(unsigned long node, const char *uname,
if (!of_flat_dt_is_compatible(node, "jcore,cache"))
return 0;
- j2_ccr_base = (u32 __iomem *)of_flat_dt_translate_address(node);
+ j2_ccr_base = ioremap(of_flat_dt_translate_address(node), 4);
return 1;
}
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index be616ee0c..5169309fd 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -18,6 +18,7 @@
#include <linux/smp.h>
#include <linux/atomic.h>
#include <asm/pgalloc.h>
+#include <asm/processor.h>
#include <asm/smp.h>
#include <asm/bl_bit.h>
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index b2f44eb7c..8ef497062 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -42,6 +42,7 @@
#include <asm/smp.h>
#include <asm/mmu_context.h>
#include <asm/mmzone.h>
+#include <asm/processor.h>
#include <asm/sparsemem.h>
/*
@@ -361,3 +362,57 @@ int test_mode_pin(int pin)
{
return sh_mv.mv_mode_pins() & pin;
}
+
+void __init arch_cpu_finalize_init(void)
+{
+ char *p = &init_utsname()->machine[2]; /* "sh" */
+
+ select_idle_routine();
+
+ current_cpu_data.loops_per_jiffy = loops_per_jiffy;
+
+ switch (current_cpu_data.family) {
+ case CPU_FAMILY_SH2:
+ *p++ = '2';
+ break;
+ case CPU_FAMILY_SH2A:
+ *p++ = '2';
+ *p++ = 'a';
+ break;
+ case CPU_FAMILY_SH3:
+ *p++ = '3';
+ break;
+ case CPU_FAMILY_SH4:
+ *p++ = '4';
+ break;
+ case CPU_FAMILY_SH4A:
+ *p++ = '4';
+ *p++ = 'a';
+ break;
+ case CPU_FAMILY_SH4AL_DSP:
+ *p++ = '4';
+ *p++ = 'a';
+ *p++ = 'l';
+ *p++ = '-';
+ *p++ = 'd';
+ *p++ = 's';
+ *p++ = 'p';
+ break;
+ case CPU_FAMILY_UNKNOWN:
+ /*
+ * Specifically use CPU_FAMILY_UNKNOWN rather than
+ * default:, so we're able to have the compiler whine
+ * about unhandled enumerations.
+ */
+ break;
+ }
+
+ pr_info("CPU: %s\n", get_cpu_subtype(&current_cpu_data));
+
+#ifndef __LITTLE_ENDIAN__
+ /* 'eb' means 'Endian Big' */
+ *p++ = 'e';
+ *p++ = 'b';
+#endif
+ *p = '\0';
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 10:03:04 +0000