diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/x86/Kconfig | 2962 | ||||
| -rw-r--r-- | arch/x86/Kconfig.cpu | 468 | ||||
| -rw-r--r-- | arch/x86/Kconfig.debug | 409 |
3 files changed, 3839 insertions, 0 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig new file mode 100644 index 000000000..be4403a8e --- /dev/null +++ b/arch/x86/Kconfig @@ -0,0 +1,2962 @@ +# SPDX-License-Identifier: GPL-2.0 +# Select 32 or 64 bit +config 64BIT + bool "64-bit kernel" if "$(ARCH)" = "x86" + default "$(ARCH)" != "i386" + ---help--- + Say yes to build a 64-bit kernel - formerly known as x86_64 + Say no to build a 32-bit kernel - formerly known as i386 + +config X86_32 + def_bool y + depends on !64BIT + # Options that are inherently 32-bit kernel only: + select ARCH_WANT_IPC_PARSE_VERSION + select CLKSRC_I8253 + select CLONE_BACKWARDS + select HAVE_AOUT + select HAVE_GENERIC_DMA_COHERENT + select MODULES_USE_ELF_REL + select OLD_SIGACTION + +config X86_64 + def_bool y + depends on 64BIT + # Options that are inherently 64-bit kernel only: + select ARCH_HAS_GIGANTIC_PAGE if (MEMORY_ISOLATION && COMPACTION) || CMA + select ARCH_SUPPORTS_INT128 + select ARCH_USE_CMPXCHG_LOCKREF + select HAVE_ARCH_SOFT_DIRTY + select MODULES_USE_ELF_RELA + select NEED_DMA_MAP_STATE + select SWIOTLB + select X86_DEV_DMA_OPS + select ARCH_HAS_SYSCALL_WRAPPER + +# +# Arch settings +# +# ( Note that options that are marked 'if X86_64' could in principle be +# ported to 32-bit as well. ) +# +config X86 + def_bool y + # + # Note: keep this list sorted alphabetically + # + select ACPI_LEGACY_TABLES_LOOKUP if ACPI + select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI + select ANON_INODES + select ARCH_CLOCKSOURCE_DATA + select ARCH_DISCARD_MEMBLOCK + select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI + select ARCH_HAS_DEBUG_VIRTUAL + select ARCH_HAS_DEVMEM_IS_ALLOWED + select ARCH_HAS_ELF_RANDOMIZE + select ARCH_HAS_FAST_MULTIPLIER + select ARCH_HAS_FILTER_PGPROT + select ARCH_HAS_FORTIFY_SOURCE + select ARCH_HAS_GCOV_PROFILE_ALL + select ARCH_HAS_KCOV if X86_64 + select ARCH_HAS_MEMBARRIER_SYNC_CORE + select ARCH_HAS_PMEM_API if X86_64 + select ARCH_HAS_PTE_SPECIAL + select ARCH_HAS_REFCOUNT + select ARCH_HAS_UACCESS_FLUSHCACHE if X86_64 + select ARCH_HAS_UACCESS_MCSAFE if X86_64 && X86_MCE + select ARCH_HAS_SET_MEMORY + select ARCH_HAS_SG_CHAIN + select ARCH_HAS_STRICT_KERNEL_RWX + select ARCH_HAS_STRICT_MODULE_RWX + select ARCH_HAS_SYNC_CORE_BEFORE_USERMODE + select ARCH_HAS_UBSAN_SANITIZE_ALL + select ARCH_HAS_ZONE_DEVICE if X86_64 + select ARCH_HAVE_NMI_SAFE_CMPXCHG + select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select ARCH_SUPPORTS_ACPI + select ARCH_SUPPORTS_ATOMIC_RMW + select ARCH_SUPPORTS_NUMA_BALANCING if X86_64 + select ARCH_USE_BUILTIN_BSWAP + select ARCH_USE_QUEUED_RWLOCKS + select ARCH_USE_QUEUED_SPINLOCKS + select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH + select ARCH_WANTS_DYNAMIC_TASK_STRUCT + select ARCH_WANTS_THP_SWAP if X86_64 + select BUILDTIME_EXTABLE_SORT + select CLKEVT_I8253 + select CLOCKSOURCE_VALIDATE_LAST_CYCLE + select CLOCKSOURCE_WATCHDOG + select DCACHE_WORD_ACCESS + select DMA_DIRECT_OPS + select EDAC_ATOMIC_SCRUB + select EDAC_SUPPORT + select GENERIC_CLOCKEVENTS + select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC) + select GENERIC_CLOCKEVENTS_MIN_ADJUST + select GENERIC_CMOS_UPDATE + select GENERIC_CPU_AUTOPROBE + select GENERIC_CPU_VULNERABILITIES + select GENERIC_EARLY_IOREMAP + select GENERIC_FIND_FIRST_BIT + select GENERIC_IOMAP + select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP + select GENERIC_IRQ_MATRIX_ALLOCATOR if X86_LOCAL_APIC + select GENERIC_IRQ_MIGRATION if SMP + select GENERIC_IRQ_PROBE + select GENERIC_IRQ_RESERVATION_MODE + select GENERIC_IRQ_SHOW + select GENERIC_PENDING_IRQ if SMP + select GENERIC_SMP_IDLE_THREAD + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER + select GENERIC_TIME_VSYSCALL + select HARDLOCKUP_CHECK_TIMESTAMP if X86_64 + select HAVE_ACPI_APEI if ACPI + select HAVE_ACPI_APEI_NMI if ACPI + select HAVE_ALIGNED_STRUCT_PAGE if SLUB + select HAVE_ARCH_AUDITSYSCALL + select HAVE_ARCH_HUGE_VMAP if X86_64 || X86_PAE + select HAVE_ARCH_JUMP_LABEL + select HAVE_ARCH_KASAN if X86_64 + select HAVE_ARCH_KGDB + select HAVE_ARCH_MMAP_RND_BITS if MMU + select HAVE_ARCH_MMAP_RND_COMPAT_BITS if MMU && COMPAT + select HAVE_ARCH_COMPAT_MMAP_BASES if MMU && COMPAT + select HAVE_ARCH_PREL32_RELOCATIONS + select HAVE_ARCH_SECCOMP_FILTER + select HAVE_ARCH_THREAD_STRUCT_WHITELIST + select HAVE_ARCH_TRACEHOOK + select HAVE_ARCH_TRANSPARENT_HUGEPAGE + select HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD if X86_64 + select HAVE_ARCH_VMAP_STACK if X86_64 + select HAVE_ARCH_WITHIN_STACK_FRAMES + select HAVE_CMPXCHG_DOUBLE + select HAVE_CMPXCHG_LOCAL + select HAVE_CONTEXT_TRACKING if X86_64 + select HAVE_COPY_THREAD_TLS + select HAVE_C_RECORDMCOUNT + select HAVE_DEBUG_KMEMLEAK + select HAVE_DEBUG_STACKOVERFLOW + select HAVE_DMA_CONTIGUOUS + select HAVE_DYNAMIC_FTRACE + select HAVE_DYNAMIC_FTRACE_WITH_REGS + select HAVE_EBPF_JIT + select HAVE_EFFICIENT_UNALIGNED_ACCESS + select HAVE_EXIT_THREAD + select HAVE_FENTRY if X86_64 || DYNAMIC_FTRACE + select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_FUNCTION_TRACER + select HAVE_GCC_PLUGINS + select HAVE_HW_BREAKPOINT + select HAVE_IDE + select HAVE_IOREMAP_PROT + select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64 + select HAVE_IRQ_TIME_ACCOUNTING + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_LZ4 + select HAVE_KERNEL_LZMA + select HAVE_KERNEL_LZO + select HAVE_KERNEL_XZ + select HAVE_KPROBES + select HAVE_KPROBES_ON_FTRACE + select HAVE_FUNCTION_ERROR_INJECTION + select HAVE_KRETPROBES + select HAVE_KVM + select HAVE_LIVEPATCH if X86_64 + select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP + select HAVE_MIXED_BREAKPOINTS_REGS + select HAVE_MOD_ARCH_SPECIFIC + select HAVE_NMI + select HAVE_OPROFILE + select HAVE_OPTPROBES + select HAVE_PCSPKR_PLATFORM + select HAVE_PERF_EVENTS + select HAVE_PERF_EVENTS_NMI + select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI + select HAVE_PERF_REGS + select HAVE_PERF_USER_STACK_DUMP + select HAVE_RCU_TABLE_FREE if PARAVIRT + select HAVE_RCU_TABLE_INVALIDATE if HAVE_RCU_TABLE_FREE + select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_RELIABLE_STACKTRACE if X86_64 && (UNWINDER_FRAME_POINTER || UNWINDER_ORC) && STACK_VALIDATION + select HAVE_STACKPROTECTOR if CC_HAS_SANE_STACKPROTECTOR + select HAVE_STACK_VALIDATION if X86_64 + select HAVE_RSEQ + select HAVE_SYSCALL_TRACEPOINTS + select HAVE_UNSTABLE_SCHED_CLOCK + select HAVE_USER_RETURN_NOTIFIER + select HOTPLUG_SMT if SMP + select IRQ_FORCED_THREADING + select NEED_SG_DMA_LENGTH + select PCI_LOCKLESS_CONFIG + select PERF_EVENTS + select RTC_LIB + select RTC_MC146818_LIB + select SPARSE_IRQ + select SRCU + select SYSCTL_EXCEPTION_TRACE + select THREAD_INFO_IN_TASK + select USER_STACKTRACE_SUPPORT + select VIRT_TO_BUS + select X86_FEATURE_NAMES if PROC_FS + +config INSTRUCTION_DECODER + def_bool y + depends on KPROBES || PERF_EVENTS || UPROBES + +config OUTPUT_FORMAT + string + default "elf32-i386" if X86_32 + default "elf64-x86-64" if X86_64 + +config ARCH_DEFCONFIG + string + default "arch/x86/configs/i386_defconfig" if X86_32 + default "arch/x86/configs/x86_64_defconfig" if X86_64 + +config LOCKDEP_SUPPORT + def_bool y + +config STACKTRACE_SUPPORT + def_bool y + +config MMU + def_bool y + +config ARCH_MMAP_RND_BITS_MIN + default 28 if 64BIT + default 8 + +config ARCH_MMAP_RND_BITS_MAX + default 32 if 64BIT + default 16 + +config ARCH_MMAP_RND_COMPAT_BITS_MIN + default 8 + +config ARCH_MMAP_RND_COMPAT_BITS_MAX + default 16 + +config SBUS + bool + +config GENERIC_ISA_DMA + def_bool y + depends on ISA_DMA_API + +config GENERIC_BUG + def_bool y + depends on BUG + select GENERIC_BUG_RELATIVE_POINTERS if X86_64 + +config GENERIC_BUG_RELATIVE_POINTERS + bool + +config GENERIC_HWEIGHT + def_bool y + +config ARCH_MAY_HAVE_PC_FDC + def_bool y + depends on ISA_DMA_API + +config RWSEM_XCHGADD_ALGORITHM + def_bool y + +config GENERIC_CALIBRATE_DELAY + def_bool y + +config ARCH_HAS_CPU_RELAX + def_bool y + +config ARCH_HAS_CACHE_LINE_SIZE + def_bool y + +config ARCH_HAS_FILTER_PGPROT + def_bool y + +config HAVE_SETUP_PER_CPU_AREA + def_bool y + +config NEED_PER_CPU_EMBED_FIRST_CHUNK + def_bool y + +config NEED_PER_CPU_PAGE_FIRST_CHUNK + def_bool y + +config ARCH_HIBERNATION_POSSIBLE + def_bool y + +config ARCH_SUSPEND_POSSIBLE + def_bool y + +config ARCH_WANT_HUGE_PMD_SHARE + def_bool y + +config ARCH_WANT_GENERAL_HUGETLB + def_bool y + +config ZONE_DMA32 + def_bool y if X86_64 + +config AUDIT_ARCH + def_bool y if X86_64 + +config ARCH_SUPPORTS_OPTIMIZED_INLINING + def_bool y + +config ARCH_SUPPORTS_DEBUG_PAGEALLOC + def_bool y + +config KASAN_SHADOW_OFFSET + hex + depends on KASAN + default 0xdffffc0000000000 + +config HAVE_INTEL_TXT + def_bool y + depends on INTEL_IOMMU && ACPI + +config X86_32_SMP + def_bool y + depends on X86_32 && SMP + +config X86_64_SMP + def_bool y + depends on X86_64 && SMP + +config X86_32_LAZY_GS + def_bool y + depends on X86_32 && !STACKPROTECTOR + +config ARCH_SUPPORTS_UPROBES + def_bool y + +config FIX_EARLYCON_MEM + def_bool y + +config DYNAMIC_PHYSICAL_MASK + bool + +config PGTABLE_LEVELS + int + default 5 if X86_5LEVEL + default 4 if X86_64 + default 3 if X86_PAE + default 2 + +config CC_HAS_SANE_STACKPROTECTOR + bool + default $(success,$(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC)) if 64BIT + default $(success,$(srctree)/scripts/gcc-x86_32-has-stack-protector.sh $(CC)) + help + We have to make sure stack protector is unconditionally disabled if + the compiler produces broken code. + +menu "Processor type and features" + +config ZONE_DMA + bool "DMA memory allocation support" if EXPERT + default y + help + DMA memory allocation support allows devices with less than 32-bit + addressing to allocate within the first 16MB of address space. + Disable if no such devices will be used. + + If unsure, say Y. + +config SMP + bool "Symmetric multi-processing support" + ---help--- + This enables support for systems with more than one CPU. If you have + a system with only one CPU, say N. If you have a system with more + than one CPU, say Y. + + If you say N here, the kernel will run on uni- and multiprocessor + machines, but will use only one CPU of a multiprocessor machine. If + you say Y here, the kernel will run on many, but not all, + uniprocessor machines. On a uniprocessor machine, the kernel + will run faster if you say N here. + + Note that if you say Y here and choose architecture "586" or + "Pentium" under "Processor family", the kernel will not work on 486 + architectures. Similarly, multiprocessor kernels for the "PPro" + architecture may not work on all Pentium based boards. + + People using multiprocessor machines who say Y here should also say + Y to "Enhanced Real Time Clock Support", below. The "Advanced Power + Management" code will be disabled if you say Y here. + + See also <file:Documentation/x86/i386/IO-APIC.txt>, + <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO available at + <http://www.tldp.org/docs.html#howto>. + + If you don't know what to do here, say N. + +config X86_FEATURE_NAMES + bool "Processor feature human-readable names" if EMBEDDED + default y + ---help--- + This option compiles in a table of x86 feature bits and corresponding + names. This is required to support /proc/cpuinfo and a few kernel + messages. You can disable this to save space, at the expense of + making those few kernel messages show numeric feature bits instead. + + If in doubt, say Y. + +config X86_X2APIC + bool "Support x2apic" + depends on X86_LOCAL_APIC && X86_64 && (IRQ_REMAP || HYPERVISOR_GUEST) + ---help--- + This enables x2apic support on CPUs that have this feature. + + This allows 32-bit apic IDs (so it can support very large systems), + and accesses the local apic via MSRs not via mmio. + + If you don't know what to do here, say N. + +config X86_MPPARSE + bool "Enable MPS table" if ACPI || SFI + default y + depends on X86_LOCAL_APIC + ---help--- + For old smp systems that do not have proper acpi support. Newer systems + (esp with 64bit cpus) with acpi support, MADT and DSDT will override it + +config GOLDFISH + def_bool y + depends on X86_GOLDFISH + +config RETPOLINE + bool "Avoid speculative indirect branches in kernel" + default y + select STACK_VALIDATION if HAVE_STACK_VALIDATION + help + Compile kernel with the retpoline compiler options to guard against + kernel-to-user data leaks by avoiding speculative indirect + branches. Requires a compiler with -mindirect-branch=thunk-extern + support for full protection. The kernel may run slower. + +config INTEL_RDT + bool "Intel Resource Director Technology support" + default n + depends on X86 && CPU_SUP_INTEL + select KERNFS + help + Select to enable resource allocation and monitoring which are + sub-features of Intel Resource Director Technology(RDT). More + information about RDT can be found in the Intel x86 + Architecture Software Developer Manual. + + Say N if unsure. + +if X86_32 +config X86_BIGSMP + bool "Support for big SMP systems with more than 8 CPUs" + depends on SMP + ---help--- + This option is needed for the systems that have more than 8 CPUs + +config X86_EXTENDED_PLATFORM + bool "Support for extended (non-PC) x86 platforms" + default y + ---help--- + If you disable this option then the kernel will only support + standard PC platforms. (which covers the vast majority of + systems out there.) + + If you enable this option then you'll be able to select support + for the following (non-PC) 32 bit x86 platforms: + Goldfish (Android emulator) + AMD Elan + RDC R-321x SoC + SGI 320/540 (Visual Workstation) + STA2X11-based (e.g. Northville) + Moorestown MID devices + + If you have one of these systems, or if you want to build a + generic distribution kernel, say Y here - otherwise say N. +endif + +if X86_64 +config X86_EXTENDED_PLATFORM + bool "Support for extended (non-PC) x86 platforms" + default y + ---help--- + If you disable this option then the kernel will only support + standard PC platforms. (which covers the vast majority of + systems out there.) + + If you enable this option then you'll be able to select support + for the following (non-PC) 64 bit x86 platforms: + Numascale NumaChip + ScaleMP vSMP + SGI Ultraviolet + + If you have one of these systems, or if you want to build a + generic distribution kernel, say Y here - otherwise say N. +endif +# This is an alphabetically sorted list of 64 bit extended platforms +# Please maintain the alphabetic order if and when there are additions +config X86_NUMACHIP + bool "Numascale NumaChip" + depends on X86_64 + depends on X86_EXTENDED_PLATFORM + depends on NUMA + depends on SMP + depends on X86_X2APIC + depends on PCI_MMCONFIG + ---help--- + Adds support for Numascale NumaChip large-SMP systems. Needed to + enable more than ~168 cores. + If you don't have one of these, you should say N here. + +config X86_VSMP + bool "ScaleMP vSMP" + select HYPERVISOR_GUEST + select PARAVIRT + depends on X86_64 && PCI + depends on X86_EXTENDED_PLATFORM + depends on SMP + ---help--- + Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is + supposed to run on these EM64T-based machines. Only choose this option + if you have one of these machines. + +config X86_UV + bool "SGI Ultraviolet" + depends on X86_64 + depends on X86_EXTENDED_PLATFORM + depends on NUMA + depends on EFI + depends on KEXEC_CORE + depends on X86_X2APIC + depends on PCI + ---help--- + This option is needed in order to support SGI Ultraviolet systems. + If you don't have one of these, you should say N here. + +# Following is an alphabetically sorted list of 32 bit extended platforms +# Please maintain the alphabetic order if and when there are additions + +config X86_GOLDFISH + bool "Goldfish (Virtual Platform)" + depends on X86_EXTENDED_PLATFORM + ---help--- + Enable support for the Goldfish virtual platform used primarily + for Android development. Unless you are building for the Android + Goldfish emulator say N here. + +config X86_INTEL_CE + bool "CE4100 TV platform" + depends on PCI + depends on PCI_GODIRECT + depends on X86_IO_APIC + depends on X86_32 + depends on X86_EXTENDED_PLATFORM + select X86_REBOOTFIXUPS + select OF + select OF_EARLY_FLATTREE + ---help--- + Select for the Intel CE media processor (CE4100) SOC. + This option compiles in support for the CE4100 SOC for settop + boxes and media devices. + +config X86_INTEL_MID + bool "Intel MID platform support" + depends on X86_EXTENDED_PLATFORM + depends on X86_PLATFORM_DEVICES + depends on PCI + depends on X86_64 || (PCI_GOANY && X86_32) + depends on X86_IO_APIC + select SFI + select I2C + select DW_APB_TIMER + select APB_TIMER + select INTEL_SCU_IPC + select MFD_INTEL_MSIC + ---help--- + Select to build a kernel capable of supporting Intel MID (Mobile + Internet Device) platform systems which do not have the PCI legacy + interfaces. If you are building for a PC class system say N here. + + Intel MID platforms are based on an Intel processor and chipset which + consume less power than most of the x86 derivatives. + +config X86_INTEL_QUARK + bool "Intel Quark platform support" + depends on X86_32 + depends on X86_EXTENDED_PLATFORM + depends on X86_PLATFORM_DEVICES + depends on X86_TSC + depends on PCI + depends on PCI_GOANY + depends on X86_IO_APIC + select IOSF_MBI + select INTEL_IMR + select COMMON_CLK + ---help--- + Select to include support for Quark X1000 SoC. + Say Y here if you have a Quark based system such as the Arduino + compatible Intel Galileo. + +config X86_INTEL_LPSS + bool "Intel Low Power Subsystem Support" + depends on X86 && ACPI + select COMMON_CLK + select PINCTRL + select IOSF_MBI + ---help--- + Select to build support for Intel Low Power Subsystem such as + found on Intel Lynxpoint PCH. Selecting this option enables + things like clock tree (common clock framework) and pincontrol + which are needed by the LPSS peripheral drivers. + +config X86_AMD_PLATFORM_DEVICE + bool "AMD ACPI2Platform devices support" + depends on ACPI + select COMMON_CLK + select PINCTRL + ---help--- + Select to interpret AMD specific ACPI device to platform device + such as I2C, UART, GPIO found on AMD Carrizo and later chipsets. + I2C and UART depend on COMMON_CLK to set clock. GPIO driver is + implemented under PINCTRL subsystem. + +config IOSF_MBI + tristate "Intel SoC IOSF Sideband support for SoC platforms" + depends on PCI + ---help--- + This option enables sideband register access support for Intel SoC + platforms. On these platforms the IOSF sideband is used in lieu of + MSR's for some register accesses, mostly but not limited to thermal + and power. Drivers may query the availability of this device to + determine if they need the sideband in order to work on these + platforms. The sideband is available on the following SoC products. + This list is not meant to be exclusive. + - BayTrail + - Braswell + - Quark + + You should say Y if you are running a kernel on one of these SoC's. + +config IOSF_MBI_DEBUG + bool "Enable IOSF sideband access through debugfs" + depends on IOSF_MBI && DEBUG_FS + ---help--- + Select this option to expose the IOSF sideband access registers (MCR, + MDR, MCRX) through debugfs to write and read register information from + different units on the SoC. This is most useful for obtaining device + state information for debug and analysis. As this is a general access + mechanism, users of this option would have specific knowledge of the + device they want to access. + + If you don't require the option or are in doubt, say N. + +config X86_RDC321X + bool "RDC R-321x SoC" + depends on X86_32 + depends on X86_EXTENDED_PLATFORM + select M486 + select X86_REBOOTFIXUPS + ---help--- + This option is needed for RDC R-321x system-on-chip, also known + as R-8610-(G). + If you don't have one of these chips, you should say N here. + +config X86_32_NON_STANDARD + bool "Support non-standard 32-bit SMP architectures" + depends on X86_32 && SMP + depends on X86_EXTENDED_PLATFORM + ---help--- + This option compiles in the bigsmp and STA2X11 default + subarchitectures. It is intended for a generic binary + kernel. If you select them all, kernel will probe it one by + one and will fallback to default. + +# Alphabetically sorted list of Non standard 32 bit platforms + +config X86_SUPPORTS_MEMORY_FAILURE + def_bool y + # MCE code calls memory_failure(): + depends on X86_MCE + # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags: + # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH: + depends on X86_64 || !SPARSEMEM + select ARCH_SUPPORTS_MEMORY_FAILURE + +config STA2X11 + bool "STA2X11 Companion Chip Support" + depends on X86_32_NON_STANDARD && PCI + select ARCH_HAS_PHYS_TO_DMA + select X86_DEV_DMA_OPS + select X86_DMA_REMAP + select SWIOTLB + select MFD_STA2X11 + select GPIOLIB + default n + ---help--- + This adds support for boards based on the STA2X11 IO-Hub, + a.k.a. "ConneXt". The chip is used in place of the standard + PC chipset, so all "standard" peripherals are missing. If this + option is selected the kernel will still be able to boot on + standard PC machines. + +config X86_32_IRIS + tristate "Eurobraille/Iris poweroff module" + depends on X86_32 + ---help--- + The Iris machines from EuroBraille do not have APM or ACPI support + to shut themselves down properly. A special I/O sequence is + needed to do so, which is what this module does at + kernel shutdown. + + This is only for Iris machines from EuroBraille. + + If unused, say N. + +config SCHED_OMIT_FRAME_POINTER + def_bool y + prompt "Single-depth WCHAN output" + depends on X86 + ---help--- + Calculate simpler /proc/<PID>/wchan values. If this option + is disabled then wchan values will recurse back to the + caller function. This provides more accurate wchan values, + at the expense of slightly more scheduling overhead. + + If in doubt, say "Y". + +menuconfig HYPERVISOR_GUEST + bool "Linux guest support" + ---help--- + Say Y here to enable options for running Linux under various hyper- + visors. This option enables basic hypervisor detection and platform + setup. + + If you say N, all options in this submenu will be skipped and + disabled, and Linux guest support won't be built in. + +if HYPERVISOR_GUEST + +config PARAVIRT + bool "Enable paravirtualization code" + ---help--- + This changes the kernel so it can modify itself when it is run + under a hypervisor, potentially improving performance significantly + over full virtualization. However, when run without a hypervisor + the kernel is theoretically slower and slightly larger. + +config PARAVIRT_DEBUG + bool "paravirt-ops debugging" + depends on PARAVIRT && DEBUG_KERNEL + ---help--- + Enable to debug paravirt_ops internals. Specifically, BUG if + a paravirt_op is missing when it is called. + +config PARAVIRT_SPINLOCKS + bool "Paravirtualization layer for spinlocks" + depends on PARAVIRT && SMP + ---help--- + Paravirtualized spinlocks allow a pvops backend to replace the + spinlock implementation with something virtualization-friendly + (for example, block the virtual CPU rather than spinning). + + It has a minimal impact on native kernels and gives a nice performance + benefit on paravirtualized KVM / Xen kernels. + + If you are unsure how to answer this question, answer Y. + +config QUEUED_LOCK_STAT + bool "Paravirt queued spinlock statistics" + depends on PARAVIRT_SPINLOCKS && DEBUG_FS + ---help--- + Enable the collection of statistical data on the slowpath + behavior of paravirtualized queued spinlocks and report + them on debugfs. + +source "arch/x86/xen/Kconfig" + +config KVM_GUEST + bool "KVM Guest support (including kvmclock)" + depends on PARAVIRT + select PARAVIRT_CLOCK + default y + ---help--- + This option enables various optimizations for running under the KVM + hypervisor. It includes a paravirtualized clock, so that instead + of relying on a PIT (or probably other) emulation by the + underlying device model, the host provides the guest with + timing infrastructure such as time of day, and system time + +config KVM_DEBUG_FS + bool "Enable debug information for KVM Guests in debugfs" + depends on KVM_GUEST && DEBUG_FS + default n + ---help--- + This option enables collection of various statistics for KVM guest. + Statistics are displayed in debugfs filesystem. Enabling this option + may incur significant overhead. + +config PARAVIRT_TIME_ACCOUNTING + bool "Paravirtual steal time accounting" + depends on PARAVIRT + default n + ---help--- + Select this option to enable fine granularity task steal time + accounting. Time spent executing other tasks in parallel with + the current vCPU is discounted from the vCPU power. To account for + that, there can be a small performance impact. + + If in doubt, say N here. + +config PARAVIRT_CLOCK + bool + +config JAILHOUSE_GUEST + bool "Jailhouse non-root cell support" + depends on X86_64 && PCI + select X86_PM_TIMER + ---help--- + This option allows to run Linux as guest in a Jailhouse non-root + cell. You can leave this option disabled if you only want to start + Jailhouse and run Linux afterwards in the root cell. + +endif #HYPERVISOR_GUEST + +config NO_BOOTMEM + def_bool y + +source "arch/x86/Kconfig.cpu" + +config HPET_TIMER + def_bool X86_64 + prompt "HPET Timer Support" if X86_32 + ---help--- + Use the IA-PC HPET (High Precision Event Timer) to manage + time in preference to the PIT and RTC, if a HPET is + present. + HPET is the next generation timer replacing legacy 8254s. + The HPET provides a stable time base on SMP + systems, unlike the TSC, but it is more expensive to access, + as it is off-chip. The interface used is documented + in the HPET spec, revision 1. + + You can safely choose Y here. However, HPET will only be + activated if the platform and the BIOS support this feature. + Otherwise the 8254 will be used for timing services. + + Choose N to continue using the legacy 8254 timer. + +config HPET_EMULATE_RTC + def_bool y + depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y) + +config APB_TIMER + def_bool y if X86_INTEL_MID + prompt "Intel MID APB Timer Support" if X86_INTEL_MID + select DW_APB_TIMER + depends on X86_INTEL_MID && SFI + help + APB timer is the replacement for 8254, HPET on X86 MID platforms. + The APBT provides a stable time base on SMP + systems, unlike the TSC, but it is more expensive to access, + as it is off-chip. APB timers are always running regardless of CPU + C states, they are used as per CPU clockevent device when possible. + +# Mark as expert because too many people got it wrong. +# The code disables itself when not needed. +config DMI + default y + select DMI_SCAN_MACHINE_NON_EFI_FALLBACK + bool "Enable DMI scanning" if EXPERT + ---help--- + Enabled scanning of DMI to identify machine quirks. Say Y + here unless you have verified that your setup is not + affected by entries in the DMI blacklist. Required by PNP + BIOS code. + +config GART_IOMMU + bool "Old AMD GART IOMMU support" + select IOMMU_HELPER + select SWIOTLB + depends on X86_64 && PCI && AMD_NB + ---help--- + Provides a driver for older AMD Athlon64/Opteron/Turion/Sempron + GART based hardware IOMMUs. + + The GART supports full DMA access for devices with 32-bit access + limitations, on systems with more than 3 GB. This is usually needed + for USB, sound, many IDE/SATA chipsets and some other devices. + + Newer systems typically have a modern AMD IOMMU, supported via + the CONFIG_AMD_IOMMU=y config option. + + In normal configurations this driver is only active when needed: + there's more than 3 GB of memory and the system contains a + 32-bit limited device. + + If unsure, say Y. + +config CALGARY_IOMMU + bool "IBM Calgary IOMMU support" + select IOMMU_HELPER + select SWIOTLB + depends on X86_64 && PCI + ---help--- + Support for hardware IOMMUs in IBM's xSeries x366 and x460 + systems. Needed to run systems with more than 3GB of memory + properly with 32-bit PCI devices that do not support DAC + (Double Address Cycle). Calgary also supports bus level + isolation, where all DMAs pass through the IOMMU. This + prevents them from going anywhere except their intended + destination. This catches hard-to-find kernel bugs and + mis-behaving drivers and devices that do not use the DMA-API + properly to set up their DMA buffers. The IOMMU can be + turned off at boot time with the iommu=off parameter. + Normally the kernel will make the right choice by itself. + If unsure, say Y. + +config CALGARY_IOMMU_ENABLED_BY_DEFAULT + def_bool y + prompt "Should Calgary be enabled by default?" + depends on CALGARY_IOMMU + ---help--- + Should Calgary be enabled by default? if you choose 'y', Calgary + will be used (if it exists). If you choose 'n', Calgary will not be + used even if it exists. If you choose 'n' and would like to use + Calgary anyway, pass 'iommu=calgary' on the kernel command line. + If unsure, say Y. + +config MAXSMP + bool "Enable Maximum number of SMP Processors and NUMA Nodes" + depends on X86_64 && SMP && DEBUG_KERNEL + select CPUMASK_OFFSTACK + ---help--- + Enable maximum number of CPUS and NUMA Nodes for this architecture. + If unsure, say N. + +# +# The maximum number of CPUs supported: +# +# The main config value is NR_CPUS, which defaults to NR_CPUS_DEFAULT, +# and which can be configured interactively in the +# [NR_CPUS_RANGE_BEGIN ... NR_CPUS_RANGE_END] range. +# +# The ranges are different on 32-bit and 64-bit kernels, depending on +# hardware capabilities and scalability features of the kernel. +# +# ( If MAXSMP is enabled we just use the highest possible value and disable +# interactive configuration. ) +# + +config NR_CPUS_RANGE_BEGIN + int + default NR_CPUS_RANGE_END if MAXSMP + default 1 if !SMP + default 2 + +config NR_CPUS_RANGE_END + int + depends on X86_32 + default 64 if SMP && X86_BIGSMP + default 8 if SMP && !X86_BIGSMP + default 1 if !SMP + +config NR_CPUS_RANGE_END + int + depends on X86_64 + default 8192 if SMP && ( MAXSMP || CPUMASK_OFFSTACK) + default 512 if SMP && (!MAXSMP && !CPUMASK_OFFSTACK) + default 1 if !SMP + +config NR_CPUS_DEFAULT + int + depends on X86_32 + default 32 if X86_BIGSMP + default 8 if SMP + default 1 if !SMP + +config NR_CPUS_DEFAULT + int + depends on X86_64 + default 8192 if MAXSMP + default 64 if SMP + default 1 if !SMP + +config NR_CPUS + int "Maximum number of CPUs" if SMP && !MAXSMP + range NR_CPUS_RANGE_BEGIN NR_CPUS_RANGE_END + default NR_CPUS_DEFAULT + ---help--- + This allows you to specify the maximum number of CPUs which this + kernel will support. If CPUMASK_OFFSTACK is enabled, the maximum + supported value is 8192, otherwise the maximum value is 512. The + minimum value which makes sense is 2. + + This is purely to save memory: each supported CPU adds about 8KB + to the kernel image. + +config SCHED_SMT + def_bool y if SMP + +config SCHED_MC + def_bool y + prompt "Multi-core scheduler support" + depends on SMP + ---help--- + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + +config SCHED_MC_PRIO + bool "CPU core priorities scheduler support" + depends on SCHED_MC && CPU_SUP_INTEL + select X86_INTEL_PSTATE + select CPU_FREQ + default y + ---help--- + Intel Turbo Boost Max Technology 3.0 enabled CPUs have a + core ordering determined at manufacturing time, which allows + certain cores to reach higher turbo frequencies (when running + single threaded workloads) than others. + + Enabling this kernel feature teaches the scheduler about + the TBM3 (aka ITMT) priority order of the CPU cores and adjusts the + scheduler's CPU selection logic accordingly, so that higher + overall system performance can be achieved. + + This feature will have no effect on CPUs without this feature. + + If unsure say Y here. + +config UP_LATE_INIT + def_bool y + depends on !SMP && X86_LOCAL_APIC + +config X86_UP_APIC + bool "Local APIC support on uniprocessors" if !PCI_MSI + default PCI_MSI + depends on X86_32 && !SMP && !X86_32_NON_STANDARD + ---help--- + A local APIC (Advanced Programmable Interrupt Controller) is an + integrated interrupt controller in the CPU. If you have a single-CPU + system which has a processor with a local APIC, you can say Y here to + enable and use it. If you say Y here even though your machine doesn't + have a local APIC, then the kernel will still run with no slowdown at + all. The local APIC supports CPU-generated self-interrupts (timer, + performance counters), and the NMI watchdog which detects hard + lockups. + +config X86_UP_IOAPIC + bool "IO-APIC support on uniprocessors" + depends on X86_UP_APIC + ---help--- + An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an + SMP-capable replacement for PC-style interrupt controllers. Most + SMP systems and many recent uniprocessor systems have one. + + If you have a single-CPU system with an IO-APIC, you can say Y here + to use it. If you say Y here even though your machine doesn't have + an IO-APIC, then the kernel will still run with no slowdown at all. + +config X86_LOCAL_APIC + def_bool y + depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI + select IRQ_DOMAIN_HIERARCHY + select PCI_MSI_IRQ_DOMAIN if PCI_MSI + +config X86_IO_APIC + def_bool y + depends on X86_LOCAL_APIC || X86_UP_IOAPIC + +config X86_REROUTE_FOR_BROKEN_BOOT_IRQS + bool "Reroute for broken boot IRQs" + depends on X86_IO_APIC + ---help--- + This option enables a workaround that fixes a source of + spurious interrupts. This is recommended when threaded + interrupt handling is used on systems where the generation of + superfluous "boot interrupts" cannot be disabled. + + Some chipsets generate a legacy INTx "boot IRQ" when the IRQ + entry in the chipset's IO-APIC is masked (as, e.g. the RT + kernel does during interrupt handling). On chipsets where this + boot IRQ generation cannot be disabled, this workaround keeps + the original IRQ line masked so that only the equivalent "boot + IRQ" is delivered to the CPUs. The workaround also tells the + kernel to set up the IRQ handler on the boot IRQ line. In this + way only one interrupt is delivered to the kernel. Otherwise + the spurious second interrupt may cause the kernel to bring + down (vital) interrupt lines. + + Only affects "broken" chipsets. Interrupt sharing may be + increased on these systems. + +config X86_MCE + bool "Machine Check / overheating reporting" + select GENERIC_ALLOCATOR + default y + ---help--- + Machine Check support allows the processor to notify the + kernel if it detects a problem (e.g. overheating, data corruption). + The action the kernel takes depends on the severity of the problem, + ranging from warning messages to halting the machine. + +config X86_MCELOG_LEGACY + bool "Support for deprecated /dev/mcelog character device" + depends on X86_MCE + ---help--- + Enable support for /dev/mcelog which is needed by the old mcelog + userspace logging daemon. Consider switching to the new generation + rasdaemon solution. + +config X86_MCE_INTEL + def_bool y + prompt "Intel MCE features" + depends on X86_MCE && X86_LOCAL_APIC + ---help--- + Additional support for intel specific MCE features such as + the thermal monitor. + +config X86_MCE_AMD + def_bool y + prompt "AMD MCE features" + depends on X86_MCE && X86_LOCAL_APIC && AMD_NB + ---help--- + Additional support for AMD specific MCE features such as + the DRAM Error Threshold. + +config X86_ANCIENT_MCE + bool "Support for old Pentium 5 / WinChip machine checks" + depends on X86_32 && X86_MCE + ---help--- + Include support for machine check handling on old Pentium 5 or WinChip + systems. These typically need to be enabled explicitly on the command + line. + +config X86_MCE_THRESHOLD + depends on X86_MCE_AMD || X86_MCE_INTEL + def_bool y + +config X86_MCE_INJECT + depends on X86_MCE && X86_LOCAL_APIC && DEBUG_FS + tristate "Machine check injector support" + ---help--- + Provide support for injecting machine checks for testing purposes. + If you don't know what a machine check is and you don't do kernel + QA it is safe to say n. + +config X86_THERMAL_VECTOR + def_bool y + depends on X86_MCE_INTEL + +source "arch/x86/events/Kconfig" + +config X86_LEGACY_VM86 + bool "Legacy VM86 support" + default n + depends on X86_32 + ---help--- + This option allows user programs to put the CPU into V8086 + mode, which is an 80286-era approximation of 16-bit real mode. + + Some very old versions of X and/or vbetool require this option + for user mode setting. Similarly, DOSEMU will use it if + available to accelerate real mode DOS programs. However, any + recent version of DOSEMU, X, or vbetool should be fully + functional even without kernel VM86 support, as they will all + fall back to software emulation. Nevertheless, if you are using + a 16-bit DOS program where 16-bit performance matters, vm86 + mode might be faster than emulation and you might want to + enable this option. + + Note that any app that works on a 64-bit kernel is unlikely to + need this option, as 64-bit kernels don't, and can't, support + V8086 mode. This option is also unrelated to 16-bit protected + mode and is not needed to run most 16-bit programs under Wine. + + Enabling this option increases the complexity of the kernel + and slows down exception handling a tiny bit. + + If unsure, say N here. + +config VM86 + bool + default X86_LEGACY_VM86 + +config X86_16BIT + bool "Enable support for 16-bit segments" if EXPERT + default y + depends on MODIFY_LDT_SYSCALL + ---help--- + This option is required by programs like Wine to run 16-bit + protected mode legacy code on x86 processors. Disabling + this option saves about 300 bytes on i386, or around 6K text + plus 16K runtime memory on x86-64, + +config X86_ESPFIX32 + def_bool y + depends on X86_16BIT && X86_32 + +config X86_ESPFIX64 + def_bool y + depends on X86_16BIT && X86_64 + +config X86_VSYSCALL_EMULATION + bool "Enable vsyscall emulation" if EXPERT + default y + depends on X86_64 + ---help--- + This enables emulation of the legacy vsyscall page. Disabling + it is roughly equivalent to booting with vsyscall=none, except + that it will also disable the helpful warning if a program + tries to use a vsyscall. With this option set to N, offending + programs will just segfault, citing addresses of the form + 0xffffffffff600?00. + + This option is required by many programs built before 2013, and + care should be used even with newer programs if set to N. + + Disabling this option saves about 7K of kernel size and + possibly 4K of additional runtime pagetable memory. + +config TOSHIBA + tristate "Toshiba Laptop support" + depends on X86_32 + ---help--- + This adds a driver to safely access the System Management Mode of + the CPU on Toshiba portables with a genuine Toshiba BIOS. It does + not work on models with a Phoenix BIOS. The System Management Mode + is used to set the BIOS and power saving options on Toshiba portables. + + For information on utilities to make use of this driver see the + Toshiba Linux utilities web site at: + <http://www.buzzard.org.uk/toshiba/>. + + Say Y if you intend to run this kernel on a Toshiba portable. + Say N otherwise. + +config I8K + tristate "Dell i8k legacy laptop support" + select HWMON + select SENSORS_DELL_SMM + ---help--- + This option enables legacy /proc/i8k userspace interface in hwmon + dell-smm-hwmon driver. Character file /proc/i8k reports bios version, + temperature and allows controlling fan speeds of Dell laptops via + System Management Mode. For old Dell laptops (like Dell Inspiron 8000) + it reports also power and hotkey status. For fan speed control is + needed userspace package i8kutils. + + Say Y if you intend to run this kernel on old Dell laptops or want to + use userspace package i8kutils. + Say N otherwise. + +config X86_REBOOTFIXUPS + bool "Enable X86 board specific fixups for reboot" + depends on X86_32 + ---help--- + This enables chipset and/or board specific fixups to be done + in order to get reboot to work correctly. This is only needed on + some combinations of hardware and BIOS. The symptom, for which + this config is intended, is when reboot ends with a stalled/hung + system. + + Currently, the only fixup is for the Geode machines using + CS5530A and CS5536 chipsets and the RDC R-321x SoC. + + Say Y if you want to enable the fixup. Currently, it's safe to + enable this option even if you don't need it. + Say N otherwise. + +config MICROCODE + bool "CPU microcode loading support" + default y + depends on CPU_SUP_AMD || CPU_SUP_INTEL + select FW_LOADER + ---help--- + If you say Y here, you will be able to update the microcode on + Intel and AMD processors. The Intel support is for the IA32 family, + e.g. Pentium Pro, Pentium II, Pentium III, Pentium 4, Xeon etc. The + AMD support is for families 0x10 and later. You will obviously need + the actual microcode binary data itself which is not shipped with + the Linux kernel. + + The preferred method to load microcode from a detached initrd is described + in Documentation/x86/microcode.txt. For that you need to enable + CONFIG_BLK_DEV_INITRD in order for the loader to be able to scan the + initrd for microcode blobs. + + In addition, you can build the microcode into the kernel. For that you + need to add the vendor-supplied microcode to the CONFIG_EXTRA_FIRMWARE + config option. + +config MICROCODE_INTEL + bool "Intel microcode loading support" + depends on MICROCODE + default MICROCODE + select FW_LOADER + ---help--- + This options enables microcode patch loading support for Intel + processors. + + For the current Intel microcode data package go to + <https://downloadcenter.intel.com> and search for + 'Linux Processor Microcode Data File'. + +config MICROCODE_AMD + bool "AMD microcode loading support" + depends on MICROCODE + select FW_LOADER + ---help--- + If you select this option, microcode patch loading support for AMD + processors will be enabled. + +config MICROCODE_OLD_INTERFACE + def_bool y + depends on MICROCODE + +config X86_MSR + tristate "/dev/cpu/*/msr - Model-specific register support" + ---help--- + This device gives privileged processes access to the x86 + Model-Specific Registers (MSRs). It is a character device with + major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr. + MSR accesses are directed to a specific CPU on multi-processor + systems. + +config X86_CPUID + tristate "/dev/cpu/*/cpuid - CPU information support" + ---help--- + This device gives processes access to the x86 CPUID instruction to + be executed on a specific processor. It is a character device + with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to + /dev/cpu/31/cpuid. + +choice + prompt "High Memory Support" + default HIGHMEM4G + depends on X86_32 + +config NOHIGHMEM + bool "off" + ---help--- + Linux can use up to 64 Gigabytes of physical memory on x86 systems. + However, the address space of 32-bit x86 processors is only 4 + Gigabytes large. That means that, if you have a large amount of + physical memory, not all of it can be "permanently mapped" by the + kernel. The physical memory that's not permanently mapped is called + "high memory". + + If you are compiling a kernel which will never run on a machine with + more than 1 Gigabyte total physical RAM, answer "off" here (default + choice and suitable for most users). This will result in a "3GB/1GB" + split: 3GB are mapped so that each process sees a 3GB virtual memory + space and the remaining part of the 4GB virtual memory space is used + by the kernel to permanently map as much physical memory as + possible. + + If the machine has between 1 and 4 Gigabytes physical RAM, then + answer "4GB" here. + + If more than 4 Gigabytes is used then answer "64GB" here. This + selection turns Intel PAE (Physical Address Extension) mode on. + PAE implements 3-level paging on IA32 processors. PAE is fully + supported by Linux, PAE mode is implemented on all recent Intel + processors (Pentium Pro and better). NOTE: If you say "64GB" here, + then the kernel will not boot on CPUs that don't support PAE! + + The actual amount of total physical memory will either be + auto detected or can be forced by using a kernel command line option + such as "mem=256M". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + + If unsure, say "off". + +config HIGHMEM4G + bool "4GB" + ---help--- + Select this if you have a 32-bit processor and between 1 and 4 + gigabytes of physical RAM. + +config HIGHMEM64G + bool "64GB" + depends on !M486 && !M586 && !M586TSC && !M586MMX && !MGEODE_LX && !MGEODEGX1 && !MCYRIXIII && !MELAN && !MWINCHIPC6 && !MWINCHIP3D && !MK6 + select X86_PAE + ---help--- + Select this if you have a 32-bit processor and more than 4 + gigabytes of physical RAM. + +endchoice + +choice + prompt "Memory split" if EXPERT + default VMSPLIT_3G + depends on X86_32 + ---help--- + Select the desired split between kernel and user memory. + + If the address range available to the kernel is less than the + physical memory installed, the remaining memory will be available + as "high memory". Accessing high memory is a little more costly + than low memory, as it needs to be mapped into the kernel first. + Note that increasing the kernel address space limits the range + available to user programs, making the address space there + tighter. Selecting anything other than the default 3G/1G split + will also likely make your kernel incompatible with binary-only + kernel modules. + + If you are not absolutely sure what you are doing, leave this + option alone! + + config VMSPLIT_3G + bool "3G/1G user/kernel split" + config VMSPLIT_3G_OPT + depends on !X86_PAE + bool "3G/1G user/kernel split (for full 1G low memory)" + config VMSPLIT_2G + bool "2G/2G user/kernel split" + config VMSPLIT_2G_OPT + depends on !X86_PAE + bool "2G/2G user/kernel split (for full 2G low memory)" + config VMSPLIT_1G + bool "1G/3G user/kernel split" +endchoice + +config PAGE_OFFSET + hex + default 0xB0000000 if VMSPLIT_3G_OPT + default 0x80000000 if VMSPLIT_2G + default 0x78000000 if VMSPLIT_2G_OPT + default 0x40000000 if VMSPLIT_1G + default 0xC0000000 + depends on X86_32 + +config HIGHMEM + def_bool y + depends on X86_32 && (HIGHMEM64G || HIGHMEM4G) + +config X86_PAE + bool "PAE (Physical Address Extension) Support" + depends on X86_32 && !HIGHMEM4G + select PHYS_ADDR_T_64BIT + select SWIOTLB + ---help--- + PAE is required for NX support, and furthermore enables + larger swapspace support for non-overcommit purposes. It + has the cost of more pagetable lookup overhead, and also + consumes more pagetable space per process. + +config X86_5LEVEL + bool "Enable 5-level page tables support" + select DYNAMIC_MEMORY_LAYOUT + select SPARSEMEM_VMEMMAP + depends on X86_64 + ---help--- + 5-level paging enables access to larger address space: + upto 128 PiB of virtual address space and 4 PiB of + physical address space. + + It will be supported by future Intel CPUs. + + A kernel with the option enabled can be booted on machines that + support 4- or 5-level paging. + + See Documentation/x86/x86_64/5level-paging.txt for more + information. + + Say N if unsure. + +config X86_DIRECT_GBPAGES + def_bool y + depends on X86_64 && !DEBUG_PAGEALLOC + ---help--- + Certain kernel features effectively disable kernel + linear 1 GB mappings (even if the CPU otherwise + supports them), so don't confuse the user by printing + that we have them enabled. + +config ARCH_HAS_MEM_ENCRYPT + def_bool y + +config AMD_MEM_ENCRYPT + bool "AMD Secure Memory Encryption (SME) support" + depends on X86_64 && CPU_SUP_AMD + select DYNAMIC_PHYSICAL_MASK + select ARCH_USE_MEMREMAP_PROT + ---help--- + Say yes to enable support for the encryption of system memory. + This requires an AMD processor that supports Secure Memory + Encryption (SME). + +config AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT + bool "Activate AMD Secure Memory Encryption (SME) by default" + depends on AMD_MEM_ENCRYPT + ---help--- + Say yes to have system memory encrypted by default if running on + an AMD processor that supports Secure Memory Encryption (SME). + + If set to Y, then the encryption of system memory can be + deactivated with the mem_encrypt=off command line option. + + If set to N, then the encryption of system memory can be + activated with the mem_encrypt=on command line option. + +# Common NUMA Features +config NUMA + bool "Numa Memory Allocation and Scheduler Support" + depends on SMP + depends on X86_64 || (X86_32 && HIGHMEM64G && X86_BIGSMP) + default y if X86_BIGSMP + ---help--- + Enable NUMA (Non Uniform Memory Access) support. + + The kernel will try to allocate memory used by a CPU on the + local memory controller of the CPU and add some more + NUMA awareness to the kernel. + + For 64-bit this is recommended if the system is Intel Core i7 + (or later), AMD Opteron, or EM64T NUMA. + + For 32-bit this is only needed if you boot a 32-bit + kernel on a 64-bit NUMA platform. + + Otherwise, you should say N. + +config AMD_NUMA + def_bool y + prompt "Old style AMD Opteron NUMA detection" + depends on X86_64 && NUMA && PCI + ---help--- + Enable AMD NUMA node topology detection. You should say Y here if + you have a multi processor AMD system. This uses an old method to + read the NUMA configuration directly from the builtin Northbridge + of Opteron. It is recommended to use X86_64_ACPI_NUMA instead, + which also takes priority if both are compiled in. + +config X86_64_ACPI_NUMA + def_bool y + prompt "ACPI NUMA detection" + depends on X86_64 && NUMA && ACPI && PCI + select ACPI_NUMA + ---help--- + Enable ACPI SRAT based node topology detection. + +# Some NUMA nodes have memory ranges that span +# other nodes. Even though a pfn is valid and +# between a node's start and end pfns, it may not +# reside on that node. See memmap_init_zone() +# for details. +config NODES_SPAN_OTHER_NODES + def_bool y + depends on X86_64_ACPI_NUMA + +config NUMA_EMU + bool "NUMA emulation" + depends on NUMA + ---help--- + Enable NUMA emulation. A flat machine will be split + into virtual nodes when booted with "numa=fake=N", where N is the + number of nodes. This is only useful for debugging. + +config NODES_SHIFT + int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP + range 1 10 + default "10" if MAXSMP + default "6" if X86_64 + default "3" + depends on NEED_MULTIPLE_NODES + ---help--- + Specify the maximum number of NUMA Nodes available on the target + system. Increases memory reserved to accommodate various tables. + +config ARCH_HAVE_MEMORY_PRESENT + def_bool y + depends on X86_32 && DISCONTIGMEM + +config ARCH_FLATMEM_ENABLE + def_bool y + depends on X86_32 && !NUMA + +config ARCH_DISCONTIGMEM_ENABLE + def_bool y + depends on NUMA && X86_32 + +config ARCH_DISCONTIGMEM_DEFAULT + def_bool y + depends on NUMA && X86_32 + +config ARCH_SPARSEMEM_ENABLE + def_bool y + depends on X86_64 || NUMA || X86_32 || X86_32_NON_STANDARD + select SPARSEMEM_STATIC if X86_32 + select SPARSEMEM_VMEMMAP_ENABLE if X86_64 + +config ARCH_SPARSEMEM_DEFAULT + def_bool y + depends on X86_64 + +config ARCH_SELECT_MEMORY_MODEL + def_bool y + depends on ARCH_SPARSEMEM_ENABLE + +config ARCH_MEMORY_PROBE + bool "Enable sysfs memory/probe interface" + depends on X86_64 && MEMORY_HOTPLUG + help + This option enables a sysfs memory/probe interface for testing. + See Documentation/memory-hotplug.txt for more information. + If you are unsure how to answer this question, answer N. + +config ARCH_PROC_KCORE_TEXT + def_bool y + depends on X86_64 && PROC_KCORE + +config ILLEGAL_POINTER_VALUE + hex + default 0 if X86_32 + default 0xdead000000000000 if X86_64 + +config X86_PMEM_LEGACY_DEVICE + bool + +config X86_PMEM_LEGACY + tristate "Support non-standard NVDIMMs and ADR protected memory" + depends on PHYS_ADDR_T_64BIT + depends on BLK_DEV + select X86_PMEM_LEGACY_DEVICE + select LIBNVDIMM + help + Treat memory marked using the non-standard e820 type of 12 as used + by the Intel Sandy Bridge-EP reference BIOS as protected memory. + The kernel will offer these regions to the 'pmem' driver so + they can be used for persistent storage. + + Say Y if unsure. + +config HIGHPTE + bool "Allocate 3rd-level pagetables from highmem" + depends on HIGHMEM + ---help--- + The VM uses one page table entry for each page of physical memory. + For systems with a lot of RAM, this can be wasteful of precious + low memory. Setting this option will put user-space page table + entries in high memory. + +config X86_CHECK_BIOS_CORRUPTION + bool "Check for low memory corruption" + ---help--- + Periodically check for memory corruption in low memory, which + is suspected to be caused by BIOS. Even when enabled in the + configuration, it is disabled at runtime. Enable it by + setting "memory_corruption_check=1" on the kernel command + line. By default it scans the low 64k of memory every 60 + seconds; see the memory_corruption_check_size and + memory_corruption_check_period parameters in + Documentation/admin-guide/kernel-parameters.rst to adjust this. + + When enabled with the default parameters, this option has + almost no overhead, as it reserves a relatively small amount + of memory and scans it infrequently. It both detects corruption + and prevents it from affecting the running system. + + It is, however, intended as a diagnostic tool; if repeatable + BIOS-originated corruption always affects the same memory, + you can use memmap= to prevent the kernel from using that + memory. + +config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK + bool "Set the default setting of memory_corruption_check" + depends on X86_CHECK_BIOS_CORRUPTION + default y + ---help--- + Set whether the default state of memory_corruption_check is + on or off. + +config X86_RESERVE_LOW + int "Amount of low memory, in kilobytes, to reserve for the BIOS" + default 64 + range 4 640 + ---help--- + Specify the amount of low memory to reserve for the BIOS. + + The first page contains BIOS data structures that the kernel + must not use, so that page must always be reserved. + + By default we reserve the first 64K of physical RAM, as a + number of BIOSes are known to corrupt that memory range + during events such as suspend/resume or monitor cable + insertion, so it must not be used by the kernel. + + You can set this to 4 if you are absolutely sure that you + trust the BIOS to get all its memory reservations and usages + right. If you know your BIOS have problems beyond the + default 64K area, you can set this to 640 to avoid using the + entire low memory range. + + If you have doubts about the BIOS (e.g. suspend/resume does + not work or there's kernel crashes after certain hardware + hotplug events) then you might want to enable + X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check + typical corruption patterns. + + Leave this to the default value of 64 if you are unsure. + +config MATH_EMULATION + bool + depends on MODIFY_LDT_SYSCALL + prompt "Math emulation" if X86_32 + ---help--- + Linux can emulate a math coprocessor (used for floating point + operations) if you don't have one. 486DX and Pentium processors have + a math coprocessor built in, 486SX and 386 do not, unless you added + a 487DX or 387, respectively. (The messages during boot time can + give you some hints here ["man dmesg"].) Everyone needs either a + coprocessor or this emulation. + + If you don't have a math coprocessor, you need to say Y here; if you + say Y here even though you have a coprocessor, the coprocessor will + be used nevertheless. (This behavior can be changed with the kernel + command line option "no387", which comes handy if your coprocessor + is broken. Try "man bootparam" or see the documentation of your boot + loader (lilo or loadlin) about how to pass options to the kernel at + boot time.) This means that it is a good idea to say Y here if you + intend to use this kernel on different machines. + + More information about the internals of the Linux math coprocessor + emulation can be found in <file:arch/x86/math-emu/README>. + + If you are not sure, say Y; apart from resulting in a 66 KB bigger + kernel, it won't hurt. + +config MTRR + def_bool y + prompt "MTRR (Memory Type Range Register) support" if EXPERT + ---help--- + On Intel P6 family processors (Pentium Pro, Pentium II and later) + the Memory Type Range Registers (MTRRs) may be used to control + processor access to memory ranges. This is most useful if you have + a video (VGA) card on a PCI or AGP bus. Enabling write-combining + allows bus write transfers to be combined into a larger transfer + before bursting over the PCI/AGP bus. This can increase performance + of image write operations 2.5 times or more. Saying Y here creates a + /proc/mtrr file which may be used to manipulate your processor's + MTRRs. Typically the X server should use this. + + This code has a reasonably generic interface so that similar + control registers on other processors can be easily supported + as well: + + The Cyrix 6x86, 6x86MX and M II processors have Address Range + Registers (ARRs) which provide a similar functionality to MTRRs. For + these, the ARRs are used to emulate the MTRRs. + The AMD K6-2 (stepping 8 and above) and K6-3 processors have two + MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing + write-combining. All of these processors are supported by this code + and it makes sense to say Y here if you have one of them. + + Saying Y here also fixes a problem with buggy SMP BIOSes which only + set the MTRRs for the boot CPU and not for the secondary CPUs. This + can lead to all sorts of problems, so it's good to say Y here. + + You can safely say Y even if your machine doesn't have MTRRs, you'll + just add about 9 KB to your kernel. + + See <file:Documentation/x86/mtrr.txt> for more information. + +config MTRR_SANITIZER + def_bool y + prompt "MTRR cleanup support" + depends on MTRR + ---help--- + Convert MTRR layout from continuous to discrete, so X drivers can + add writeback entries. + + Can be disabled with disable_mtrr_cleanup on the kernel command line. + The largest mtrr entry size for a continuous block can be set with + mtrr_chunk_size. + + If unsure, say Y. + +config MTRR_SANITIZER_ENABLE_DEFAULT + int "MTRR cleanup enable value (0-1)" + range 0 1 + default "0" + depends on MTRR_SANITIZER + ---help--- + Enable mtrr cleanup default value + +config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT + int "MTRR cleanup spare reg num (0-7)" + range 0 7 + default "1" + depends on MTRR_SANITIZER + ---help--- + mtrr cleanup spare entries default, it can be changed via + mtrr_spare_reg_nr=N on the kernel command line. + +config X86_PAT + def_bool y + prompt "x86 PAT support" if EXPERT + depends on MTRR + ---help--- + Use PAT attributes to setup page level cache control. + + PATs are the modern equivalents of MTRRs and are much more + flexible than MTRRs. + + Say N here if you see bootup problems (boot crash, boot hang, + spontaneous reboots) or a non-working video driver. + + If unsure, say Y. + +config ARCH_USES_PG_UNCACHED + def_bool y + depends on X86_PAT + +config ARCH_RANDOM + def_bool y + prompt "x86 architectural random number generator" if EXPERT + ---help--- + Enable the x86 architectural RDRAND instruction + (Intel Bull Mountain technology) to generate random numbers. + If supported, this is a high bandwidth, cryptographically + secure hardware random number generator. + +config X86_SMAP + def_bool y + prompt "Supervisor Mode Access Prevention" if EXPERT + ---help--- + Supervisor Mode Access Prevention (SMAP) is a security + feature in newer Intel processors. There is a small + performance cost if this enabled and turned on; there is + also a small increase in the kernel size if this is enabled. + + If unsure, say Y. + +config X86_INTEL_UMIP + def_bool y + depends on CPU_SUP_INTEL + prompt "Intel User Mode Instruction Prevention" if EXPERT + ---help--- + The User Mode Instruction Prevention (UMIP) is a security + feature in newer Intel processors. If enabled, a general + protection fault is issued if the SGDT, SLDT, SIDT, SMSW + or STR instructions are executed in user mode. These instructions + unnecessarily expose information about the hardware state. + + The vast majority of applications do not use these instructions. + For the very few that do, software emulation is provided in + specific cases in protected and virtual-8086 modes. Emulated + results are dummy. + +config X86_INTEL_MPX + prompt "Intel MPX (Memory Protection Extensions)" + def_bool n + # Note: only available in 64-bit mode due to VMA flags shortage + depends on CPU_SUP_INTEL && X86_64 + select ARCH_USES_HIGH_VMA_FLAGS + ---help--- + MPX provides hardware features that can be used in + conjunction with compiler-instrumented code to check + memory references. It is designed to detect buffer + overflow or underflow bugs. + + This option enables running applications which are + instrumented or otherwise use MPX. It does not use MPX + itself inside the kernel or to protect the kernel + against bad memory references. + + Enabling this option will make the kernel larger: + ~8k of kernel text and 36 bytes of data on a 64-bit + defconfig. It adds a long to the 'mm_struct' which + will increase the kernel memory overhead of each + process and adds some branches to paths used during + exec() and munmap(). + + For details, see Documentation/x86/intel_mpx.txt + + If unsure, say N. + +config X86_INTEL_MEMORY_PROTECTION_KEYS + prompt "Intel Memory Protection Keys" + def_bool y + # Note: only available in 64-bit mode + depends on CPU_SUP_INTEL && X86_64 + select ARCH_USES_HIGH_VMA_FLAGS + select ARCH_HAS_PKEYS + ---help--- + Memory Protection Keys provides a mechanism for enforcing + page-based protections, but without requiring modification of the + page tables when an application changes protection domains. + + For details, see Documentation/x86/protection-keys.txt + + If unsure, say y. + +choice + prompt "TSX enable mode" + depends on CPU_SUP_INTEL + default X86_INTEL_TSX_MODE_OFF + help + Intel's TSX (Transactional Synchronization Extensions) feature + allows to optimize locking protocols through lock elision which + can lead to a noticeable performance boost. + + On the other hand it has been shown that TSX can be exploited + to form side channel attacks (e.g. TAA) and chances are there + will be more of those attacks discovered in the future. + + Therefore TSX is not enabled by default (aka tsx=off). An admin + might override this decision by tsx=on the command line parameter. + Even with TSX enabled, the kernel will attempt to enable the best + possible TAA mitigation setting depending on the microcode available + for the particular machine. + + This option allows to set the default tsx mode between tsx=on, =off + and =auto. See Documentation/admin-guide/kernel-parameters.txt for more + details. + + Say off if not sure, auto if TSX is in use but it should be used on safe + platforms or on if TSX is in use and the security aspect of tsx is not + relevant. + +config X86_INTEL_TSX_MODE_OFF + bool "off" + help + TSX is disabled if possible - equals to tsx=off command line parameter. + +config X86_INTEL_TSX_MODE_ON + bool "on" + help + TSX is always enabled on TSX capable HW - equals the tsx=on command + line parameter. + +config X86_INTEL_TSX_MODE_AUTO + bool "auto" + help + TSX is enabled on TSX capable HW that is believed to be safe against + side channel attacks- equals the tsx=auto command line parameter. +endchoice + +config EFI + bool "EFI runtime service support" + depends on ACPI + select UCS2_STRING + select EFI_RUNTIME_WRAPPERS + select ARCH_USE_MEMREMAP_PROT + ---help--- + This enables the kernel to use EFI runtime services that are + available (such as the EFI variable services). + + This option is only useful on systems that have EFI firmware. + In addition, you should use the latest ELILO loader available + at <http://elilo.sourceforge.net> in order to take advantage + of EFI runtime services. However, even with this option, the + resultant kernel should continue to boot on existing non-EFI + platforms. + +config EFI_STUB + bool "EFI stub support" + depends on EFI && !X86_USE_3DNOW + select RELOCATABLE + ---help--- + This kernel feature allows a bzImage to be loaded directly + by EFI firmware without the use of a bootloader. + + See Documentation/efi-stub.txt for more information. + +config EFI_MIXED + bool "EFI mixed-mode support" + depends on EFI_STUB && X86_64 + ---help--- + Enabling this feature allows a 64-bit kernel to be booted + on a 32-bit firmware, provided that your CPU supports 64-bit + mode. + + Note that it is not possible to boot a mixed-mode enabled + kernel via the EFI boot stub - a bootloader that supports + the EFI handover protocol must be used. + + If unsure, say N. + +config SECCOMP + def_bool y + prompt "Enable seccomp to safely compute untrusted bytecode" + ---help--- + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via prctl(PR_SET_SECCOMP), it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + + If unsure, say Y. Only embedded should say N here. + +source kernel/Kconfig.hz + +config KEXEC + bool "kexec system call" + select KEXEC_CORE + ---help--- + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is independent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similarity to the exec system call. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. As of this writing the exact hardware + interface is strongly in flux, so no good recommendation can be + made. + +config KEXEC_FILE + bool "kexec file based system call" + select KEXEC_CORE + select BUILD_BIN2C + depends on X86_64 + depends on CRYPTO=y + depends on CRYPTO_SHA256=y + ---help--- + This is new version of kexec system call. This system call is + file based and takes file descriptors as system call argument + for kernel and initramfs as opposed to list of segments as + accepted by previous system call. + +config ARCH_HAS_KEXEC_PURGATORY + def_bool KEXEC_FILE + +config KEXEC_VERIFY_SIG + bool "Verify kernel signature during kexec_file_load() syscall" + depends on KEXEC_FILE + ---help--- + This option makes kernel signature verification mandatory for + the kexec_file_load() syscall. + + In addition to that option, you need to enable signature + verification for the corresponding kernel image type being + loaded in order for this to work. + +config KEXEC_BZIMAGE_VERIFY_SIG + bool "Enable bzImage signature verification support" + depends on KEXEC_VERIFY_SIG + depends on SIGNED_PE_FILE_VERIFICATION + select SYSTEM_TRUSTED_KEYRING + ---help--- + Enable bzImage signature verification support. + +config CRASH_DUMP + bool "kernel crash dumps" + depends on X86_64 || (X86_32 && HIGHMEM) + ---help--- + Generate crash dump after being started by kexec. + This should be normally only set in special crash dump kernels + which are loaded in the main kernel with kexec-tools into + a specially reserved region and then later executed after + a crash by kdump/kexec. The crash dump kernel must be compiled + to a memory address not used by the main kernel or BIOS using + PHYSICAL_START, or it must be built as a relocatable image + (CONFIG_RELOCATABLE=y). + For more details see Documentation/kdump/kdump.txt + +config KEXEC_JUMP + bool "kexec jump" + depends on KEXEC && HIBERNATION + ---help--- + Jump between original kernel and kexeced kernel and invoke + code in physical address mode via KEXEC + +config PHYSICAL_START + hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP) + default "0x1000000" + ---help--- + This gives the physical address where the kernel is loaded. + + If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then + bzImage will decompress itself to above physical address and + run from there. Otherwise, bzImage will run from the address where + it has been loaded by the boot loader and will ignore above physical + address. + + In normal kdump cases one does not have to set/change this option + as now bzImage can be compiled as a completely relocatable image + (CONFIG_RELOCATABLE=y) and be used to load and run from a different + address. This option is mainly useful for the folks who don't want + to use a bzImage for capturing the crash dump and want to use a + vmlinux instead. vmlinux is not relocatable hence a kernel needs + to be specifically compiled to run from a specific memory area + (normally a reserved region) and this option comes handy. + + So if you are using bzImage for capturing the crash dump, + leave the value here unchanged to 0x1000000 and set + CONFIG_RELOCATABLE=y. Otherwise if you plan to use vmlinux + for capturing the crash dump change this value to start of + the reserved region. In other words, it can be set based on + the "X" value as specified in the "crashkernel=YM@XM" + command line boot parameter passed to the panic-ed + kernel. Please take a look at Documentation/kdump/kdump.txt + for more details about crash dumps. + + Usage of bzImage for capturing the crash dump is recommended as + one does not have to build two kernels. Same kernel can be used + as production kernel and capture kernel. Above option should have + gone away after relocatable bzImage support is introduced. But it + is present because there are users out there who continue to use + vmlinux for dump capture. This option should go away down the + line. + + Don't change this unless you know what you are doing. + +config RELOCATABLE + bool "Build a relocatable kernel" + default y + ---help--- + This builds a kernel image that retains relocation information + so it can be loaded someplace besides the default 1MB. + The relocations tend to make the kernel binary about 10% larger, + but are discarded at runtime. + + One use is for the kexec on panic case where the recovery kernel + must live at a different physical address than the primary + kernel. + + Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address + it has been loaded at and the compile time physical address + (CONFIG_PHYSICAL_START) is used as the minimum location. + +config RANDOMIZE_BASE + bool "Randomize the address of the kernel image (KASLR)" + depends on RELOCATABLE + default y + ---help--- + In support of Kernel Address Space Layout Randomization (KASLR), + this randomizes the physical address at which the kernel image + is decompressed and the virtual address where the kernel + image is mapped, as a security feature that deters exploit + attempts relying on knowledge of the location of kernel + code internals. + + On 64-bit, the kernel physical and virtual addresses are + randomized separately. The physical address will be anywhere + between 16MB and the top of physical memory (up to 64TB). The + virtual address will be randomized from 16MB up to 1GB (9 bits + of entropy). Note that this also reduces the memory space + available to kernel modules from 1.5GB to 1GB. + + On 32-bit, the kernel physical and virtual addresses are + randomized together. They will be randomized from 16MB up to + 512MB (8 bits of entropy). + + Entropy is generated using the RDRAND instruction if it is + supported. If RDTSC is supported, its value is mixed into + the entropy pool as well. If neither RDRAND nor RDTSC are + supported, then entropy is read from the i8254 timer. The + usable entropy is limited by the kernel being built using + 2GB addressing, and that PHYSICAL_ALIGN must be at a + minimum of 2MB. As a result, only 10 bits of entropy are + theoretically possible, but the implementations are further + limited due to memory layouts. + + If unsure, say Y. + +# Relocation on x86 needs some additional build support +config X86_NEED_RELOCS + def_bool y + depends on RANDOMIZE_BASE || (X86_32 && RELOCATABLE) + +config PHYSICAL_ALIGN + hex "Alignment value to which kernel should be aligned" + default "0x200000" + range 0x2000 0x1000000 if X86_32 + range 0x200000 0x1000000 if X86_64 + ---help--- + This value puts the alignment restrictions on physical address + where kernel is loaded and run from. Kernel is compiled for an + address which meets above alignment restriction. + + If bootloader loads the kernel at a non-aligned address and + CONFIG_RELOCATABLE is set, kernel will move itself to nearest + address aligned to above value and run from there. + + If bootloader loads the kernel at a non-aligned address and + CONFIG_RELOCATABLE is not set, kernel will ignore the run time + load address and decompress itself to the address it has been + compiled for and run from there. The address for which kernel is + compiled already meets above alignment restrictions. Hence the + end result is that kernel runs from a physical address meeting + above alignment restrictions. + + On 32-bit this value must be a multiple of 0x2000. On 64-bit + this value must be a multiple of 0x200000. + + Don't change this unless you know what you are doing. + +config DYNAMIC_MEMORY_LAYOUT + bool + ---help--- + This option makes base addresses of vmalloc and vmemmap as well as + __PAGE_OFFSET movable during boot. + +config RANDOMIZE_MEMORY + bool "Randomize the kernel memory sections" + depends on X86_64 + depends on RANDOMIZE_BASE + select DYNAMIC_MEMORY_LAYOUT + default RANDOMIZE_BASE + ---help--- + Randomizes the base virtual address of kernel memory sections + (physical memory mapping, vmalloc & vmemmap). This security feature + makes exploits relying on predictable memory locations less reliable. + + The order of allocations remains unchanged. Entropy is generated in + the same way as RANDOMIZE_BASE. Current implementation in the optimal + configuration have in average 30,000 different possible virtual + addresses for each memory section. + + If unsure, say Y. + +config RANDOMIZE_MEMORY_PHYSICAL_PADDING + hex "Physical memory mapping padding" if EXPERT + depends on RANDOMIZE_MEMORY + default "0xa" if MEMORY_HOTPLUG + default "0x0" + range 0x1 0x40 if MEMORY_HOTPLUG + range 0x0 0x40 + ---help--- + Define the padding in terabytes added to the existing physical + memory size during kernel memory randomization. It is useful + for memory hotplug support but reduces the entropy available for + address randomization. + + If unsure, leave at the default value. + +config HOTPLUG_CPU + def_bool y + depends on SMP + +config BOOTPARAM_HOTPLUG_CPU0 + bool "Set default setting of cpu0_hotpluggable" + default n + depends on HOTPLUG_CPU + ---help--- + Set whether default state of cpu0_hotpluggable is on or off. + + Say Y here to enable CPU0 hotplug by default. If this switch + is turned on, there is no need to give cpu0_hotplug kernel + parameter and the CPU0 hotplug feature is enabled by default. + + Please note: there are two known CPU0 dependencies if you want + to enable the CPU0 hotplug feature either by this switch or by + cpu0_hotplug kernel parameter. + + First, resume from hibernate or suspend always starts from CPU0. + So hibernate and suspend are prevented if CPU0 is offline. + + Second dependency is PIC interrupts always go to CPU0. CPU0 can not + offline if any interrupt can not migrate out of CPU0. There may + be other CPU0 dependencies. + + Please make sure the dependencies are under your control before + you enable this feature. + + Say N if you don't want to enable CPU0 hotplug feature by default. + You still can enable the CPU0 hotplug feature at boot by kernel + parameter cpu0_hotplug. + +config DEBUG_HOTPLUG_CPU0 + def_bool n + prompt "Debug CPU0 hotplug" + depends on HOTPLUG_CPU + ---help--- + Enabling this option offlines CPU0 (if CPU0 can be offlined) as + soon as possible and boots up userspace with CPU0 offlined. User + can online CPU0 back after boot time. + + To debug CPU0 hotplug, you need to enable CPU0 offline/online + feature by either turning on CONFIG_BOOTPARAM_HOTPLUG_CPU0 during + compilation or giving cpu0_hotplug kernel parameter at boot. + + If unsure, say N. + +config COMPAT_VDSO + def_bool n + prompt "Disable the 32-bit vDSO (needed for glibc 2.3.3)" + depends on COMPAT_32 + ---help--- + Certain buggy versions of glibc will crash if they are + presented with a 32-bit vDSO that is not mapped at the address + indicated in its segment table. + + The bug was introduced by f866314b89d56845f55e6f365e18b31ec978ec3a + and fixed by 3b3ddb4f7db98ec9e912ccdf54d35df4aa30e04a and + 49ad572a70b8aeb91e57483a11dd1b77e31c4468. Glibc 2.3.3 is + the only released version with the bug, but OpenSUSE 9 + contains a buggy "glibc 2.3.2". + + The symptom of the bug is that everything crashes on startup, saying: + dl_main: Assertion `(void *) ph->p_vaddr == _rtld_local._dl_sysinfo_dso' failed! + + Saying Y here changes the default value of the vdso32 boot + option from 1 to 0, which turns off the 32-bit vDSO entirely. + This works around the glibc bug but hurts performance. + + If unsure, say N: if you are compiling your own kernel, you + are unlikely to be using a buggy version of glibc. + +choice + prompt "vsyscall table for legacy applications" + depends on X86_64 + default LEGACY_VSYSCALL_EMULATE + help + Legacy user code that does not know how to find the vDSO expects + to be able to issue three syscalls by calling fixed addresses in + kernel space. Since this location is not randomized with ASLR, + it can be used to assist security vulnerability exploitation. + + This setting can be changed at boot time via the kernel command + line parameter vsyscall=[emulate|none]. + + On a system with recent enough glibc (2.14 or newer) and no + static binaries, you can say None without a performance penalty + to improve security. + + If unsure, select "Emulate". + + config LEGACY_VSYSCALL_EMULATE + bool "Emulate" + help + The kernel traps and emulates calls into the fixed + vsyscall address mapping. This makes the mapping + non-executable, but it still contains known contents, + which could be used in certain rare security vulnerability + exploits. This configuration is recommended when userspace + still uses the vsyscall area. + + config LEGACY_VSYSCALL_NONE + bool "None" + help + There will be no vsyscall mapping at all. This will + eliminate any risk of ASLR bypass due to the vsyscall + fixed address mapping. Attempts to use the vsyscalls + will be reported to dmesg, so that either old or + malicious userspace programs can be identified. + +endchoice + +config CMDLINE_BOOL + bool "Built-in kernel command line" + ---help--- + Allow for specifying boot arguments to the kernel at + build time. On some systems (e.g. embedded ones), it is + necessary or convenient to provide some or all of the + kernel boot arguments with the kernel itself (that is, + to not rely on the boot loader to provide them.) + + To compile command line arguments into the kernel, + set this option to 'Y', then fill in the + boot arguments in CONFIG_CMDLINE. + + Systems with fully functional boot loaders (i.e. non-embedded) + should leave this option set to 'N'. + +config CMDLINE + string "Built-in kernel command string" + depends on CMDLINE_BOOL + default "" + ---help--- + Enter arguments here that should be compiled into the kernel + image and used at boot time. If the boot loader provides a + command line at boot time, it is appended to this string to + form the full kernel command line, when the system boots. + + However, you can use the CONFIG_CMDLINE_OVERRIDE option to + change this behavior. + + In most cases, the command line (whether built-in or provided + by the boot loader) should specify the device for the root + file system. + +config CMDLINE_OVERRIDE + bool "Built-in command line overrides boot loader arguments" + depends on CMDLINE_BOOL + ---help--- + Set this option to 'Y' to have the kernel ignore the boot loader + command line, and use ONLY the built-in command line. + + This is used to work around broken boot loaders. This should + be set to 'N' under normal conditions. + +config MODIFY_LDT_SYSCALL + bool "Enable the LDT (local descriptor table)" if EXPERT + default y + ---help--- + Linux can allow user programs to install a per-process x86 + Local Descriptor Table (LDT) using the modify_ldt(2) system + call. This is required to run 16-bit or segmented code such as + DOSEMU or some Wine programs. It is also used by some very old + threading libraries. + + Enabling this feature adds a small amount of overhead to + context switches and increases the low-level kernel attack + surface. Disabling it removes the modify_ldt(2) system call. + + Saying 'N' here may make sense for embedded or server kernels. + +source "kernel/livepatch/Kconfig" + +endmenu + +config ARCH_HAS_ADD_PAGES + def_bool y + depends on X86_64 && ARCH_ENABLE_MEMORY_HOTPLUG + +config ARCH_ENABLE_MEMORY_HOTPLUG + def_bool y + depends on X86_64 || (X86_32 && HIGHMEM) + +config ARCH_ENABLE_MEMORY_HOTREMOVE + def_bool y + depends on MEMORY_HOTPLUG + +config USE_PERCPU_NUMA_NODE_ID + def_bool y + depends on NUMA + +config ARCH_ENABLE_SPLIT_PMD_PTLOCK + def_bool y + depends on X86_64 || X86_PAE + +config ARCH_ENABLE_HUGEPAGE_MIGRATION + def_bool y + depends on X86_64 && HUGETLB_PAGE && MIGRATION + +config ARCH_ENABLE_THP_MIGRATION + def_bool y + depends on X86_64 && TRANSPARENT_HUGEPAGE + +menu "Power management and ACPI options" + +config ARCH_HIBERNATION_HEADER + def_bool y + depends on X86_64 && HIBERNATION + +source "kernel/power/Kconfig" + +source "drivers/acpi/Kconfig" + +source "drivers/sfi/Kconfig" + +config X86_APM_BOOT + def_bool y + depends on APM + +menuconfig APM + tristate "APM (Advanced Power Management) BIOS support" + depends on X86_32 && PM_SLEEP + ---help--- + APM is a BIOS specification for saving power using several different + techniques. This is mostly useful for battery powered laptops with + APM compliant BIOSes. If you say Y here, the system time will be + reset after a RESUME operation, the /proc/apm device will provide + battery status information, and user-space programs will receive + notification of APM "events" (e.g. battery status change). + + If you select "Y" here, you can disable actual use of the APM + BIOS by passing the "apm=off" option to the kernel at boot time. + + Note that the APM support is almost completely disabled for + machines with more than one CPU. + + In order to use APM, you will need supporting software. For location + and more information, read <file:Documentation/power/apm-acpi.txt> + and the Battery Powered Linux mini-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + This driver does not spin down disk drives (see the hdparm(8) + manpage ("man 8 hdparm") for that), and it doesn't turn off + VESA-compliant "green" monitors. + + This driver does not support the TI 4000M TravelMate and the ACER + 486/DX4/75 because they don't have compliant BIOSes. Many "green" + desktop machines also don't have compliant BIOSes, and this driver + may cause those machines to panic during the boot phase. + + Generally, if you don't have a battery in your machine, there isn't + much point in using this driver and you should say N. If you get + random kernel OOPSes or reboots that don't seem to be related to + anything, try disabling/enabling this option (or disabling/enabling + APM in your BIOS). + + Some other things you should try when experiencing seemingly random, + "weird" problems: + + 1) make sure that you have enough swap space and that it is + enabled. + 2) pass the "no-hlt" option to the kernel + 3) switch on floating point emulation in the kernel and pass + the "no387" option to the kernel + 4) pass the "floppy=nodma" option to the kernel + 5) pass the "mem=4M" option to the kernel (thereby disabling + all but the first 4 MB of RAM) + 6) make sure that the CPU is not over clocked. + 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/> + 8) disable the cache from your BIOS settings + 9) install a fan for the video card or exchange video RAM + 10) install a better fan for the CPU + 11) exchange RAM chips + 12) exchange the motherboard. + + To compile this driver as a module, choose M here: the + module will be called apm. + +if APM + +config APM_IGNORE_USER_SUSPEND + bool "Ignore USER SUSPEND" + ---help--- + This option will ignore USER SUSPEND requests. On machines with a + compliant APM BIOS, you want to say N. However, on the NEC Versa M + series notebooks, it is necessary to say Y because of a BIOS bug. + +config APM_DO_ENABLE + bool "Enable PM at boot time" + ---help--- + Enable APM features at boot time. From page 36 of the APM BIOS + specification: "When disabled, the APM BIOS does not automatically + power manage devices, enter the Standby State, enter the Suspend + State, or take power saving steps in response to CPU Idle calls." + This driver will make CPU Idle calls when Linux is idle (unless this + feature is turned off -- see "Do CPU IDLE calls", below). This + should always save battery power, but more complicated APM features + will be dependent on your BIOS implementation. You may need to turn + this option off if your computer hangs at boot time when using APM + support, or if it beeps continuously instead of suspending. Turn + this off if you have a NEC UltraLite Versa 33/C or a Toshiba + T400CDT. This is off by default since most machines do fine without + this feature. + +config APM_CPU_IDLE + depends on CPU_IDLE + bool "Make CPU Idle calls when idle" + ---help--- + Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop. + On some machines, this can activate improved power savings, such as + a slowed CPU clock rate, when the machine is idle. These idle calls + are made after the idle loop has run for some length of time (e.g., + 333 mS). On some machines, this will cause a hang at boot time or + whenever the CPU becomes idle. (On machines with more than one CPU, + this option does nothing.) + +config APM_DISPLAY_BLANK + bool "Enable console blanking using APM" + ---help--- + Enable console blanking using the APM. Some laptops can use this to + turn off the LCD backlight when the screen blanker of the Linux + virtual console blanks the screen. Note that this is only used by + the virtual console screen blanker, and won't turn off the backlight + when using the X Window system. This also doesn't have anything to + do with your VESA-compliant power-saving monitor. Further, this + option doesn't work for all laptops -- it might not turn off your + backlight at all, or it might print a lot of errors to the console, + especially if you are using gpm. + +config APM_ALLOW_INTS + bool "Allow interrupts during APM BIOS calls" + ---help--- + Normally we disable external interrupts while we are making calls to + the APM BIOS as a measure to lessen the effects of a badly behaving + BIOS implementation. The BIOS should reenable interrupts if it + needs to. Unfortunately, some BIOSes do not -- especially those in + many of the newer IBM Thinkpads. If you experience hangs when you + suspend, try setting this to Y. Otherwise, say N. + +endif # APM + +source "drivers/cpufreq/Kconfig" + +source "drivers/cpuidle/Kconfig" + +source "drivers/idle/Kconfig" + +endmenu + + +menu "Bus options (PCI etc.)" + +config PCI + bool "PCI support" + default y + ---help--- + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside + your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or + VESA. If you have PCI, say Y, otherwise N. + +choice + prompt "PCI access mode" + depends on X86_32 && PCI + default PCI_GOANY + ---help--- + On PCI systems, the BIOS can be used to detect the PCI devices and + determine their configuration. However, some old PCI motherboards + have BIOS bugs and may crash if this is done. Also, some embedded + PCI-based systems don't have any BIOS at all. Linux can also try to + detect the PCI hardware directly without using the BIOS. + + With this option, you can specify how Linux should detect the + PCI devices. If you choose "BIOS", the BIOS will be used, + if you choose "Direct", the BIOS won't be used, and if you + choose "MMConfig", then PCI Express MMCONFIG will be used. + If you choose "Any", the kernel will try MMCONFIG, then the + direct access method and falls back to the BIOS if that doesn't + work. If unsure, go with the default, which is "Any". + +config PCI_GOBIOS + bool "BIOS" + +config PCI_GOMMCONFIG + bool "MMConfig" + +config PCI_GODIRECT + bool "Direct" + +config PCI_GOOLPC + bool "OLPC XO-1" + depends on OLPC + +config PCI_GOANY + bool "Any" + +endchoice + +config PCI_BIOS + def_bool y + depends on X86_32 && PCI && (PCI_GOBIOS || PCI_GOANY) + +# x86-64 doesn't support PCI BIOS access from long mode so always go direct. +config PCI_DIRECT + def_bool y + depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC || PCI_GOMMCONFIG)) + +config PCI_MMCONFIG + bool "Support mmconfig PCI config space access" if X86_64 + default y + depends on PCI && (ACPI || SFI || JAILHOUSE_GUEST) + depends on X86_64 || (PCI_GOANY || PCI_GOMMCONFIG) + +config PCI_OLPC + def_bool y + depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY) + +config PCI_XEN + def_bool y + depends on PCI && XEN + select SWIOTLB_XEN + +config PCI_DOMAINS + def_bool y + depends on PCI + +config MMCONF_FAM10H + def_bool y + depends on X86_64 && PCI_MMCONFIG && ACPI + +config PCI_CNB20LE_QUIRK + bool "Read CNB20LE Host Bridge Windows" if EXPERT + depends on PCI + help + Read the PCI windows out of the CNB20LE host bridge. This allows + PCI hotplug to work on systems with the CNB20LE chipset which do + not have ACPI. + + There's no public spec for this chipset, and this functionality + is known to be incomplete. + + You should say N unless you know you need this. + +source "drivers/pci/Kconfig" + +config ISA_BUS + bool "ISA bus support on modern systems" if EXPERT + help + Expose ISA bus device drivers and options available for selection and + configuration. Enable this option if your target machine has an ISA + bus. ISA is an older system, displaced by PCI and newer bus + architectures -- if your target machine is modern, it probably does + not have an ISA bus. + + If unsure, say N. + +# x86_64 have no ISA slots, but can have ISA-style DMA. +config ISA_DMA_API + bool "ISA-style DMA support" if (X86_64 && EXPERT) + default y + help + Enables ISA-style DMA support for devices requiring such controllers. + If unsure, say Y. + +if X86_32 + +config ISA + bool "ISA support" + ---help--- + Find out whether you have ISA slots on your motherboard. ISA is the + name of a bus system, i.e. the way the CPU talks to the other stuff + inside your box. Other bus systems are PCI, EISA, MicroChannel + (MCA) or VESA. ISA is an older system, now being displaced by PCI; + newer boards don't support it. If you have ISA, say Y, otherwise N. + +config EISA + bool "EISA support" + depends on ISA + ---help--- + The Extended Industry Standard Architecture (EISA) bus was + developed as an open alternative to the IBM MicroChannel bus. + + The EISA bus provided some of the features of the IBM MicroChannel + bus while maintaining backward compatibility with cards made for + the older ISA bus. The EISA bus saw limited use between 1988 and + 1995 when it was made obsolete by the PCI bus. + + Say Y here if you are building a kernel for an EISA-based machine. + + Otherwise, say N. + +source "drivers/eisa/Kconfig" + +config SCx200 + tristate "NatSemi SCx200 support" + ---help--- + This provides basic support for National Semiconductor's + (now AMD's) Geode processors. The driver probes for the + PCI-IDs of several on-chip devices, so its a good dependency + for other scx200_* drivers. + + If compiled as a module, the driver is named scx200. + +config SCx200HR_TIMER + tristate "NatSemi SCx200 27MHz High-Resolution Timer Support" + depends on SCx200 + default y + ---help--- + This driver provides a clocksource built upon the on-chip + 27MHz high-resolution timer. Its also a workaround for + NSC Geode SC-1100's buggy TSC, which loses time when the + processor goes idle (as is done by the scheduler). The + other workaround is idle=poll boot option. + +config OLPC + bool "One Laptop Per Child support" + depends on !X86_PAE + select GPIOLIB + select OF + select OF_PROMTREE + select IRQ_DOMAIN + ---help--- + Add support for detecting the unique features of the OLPC + XO hardware. + +config OLPC_XO1_PM + bool "OLPC XO-1 Power Management" + depends on OLPC && MFD_CS5535=y && PM_SLEEP + ---help--- + Add support for poweroff and suspend of the OLPC XO-1 laptop. + +config OLPC_XO1_RTC + bool "OLPC XO-1 Real Time Clock" + depends on OLPC_XO1_PM && RTC_DRV_CMOS + ---help--- + Add support for the XO-1 real time clock, which can be used as a + programmable wakeup source. + +config OLPC_XO1_SCI + bool "OLPC XO-1 SCI extras" + depends on OLPC && OLPC_XO1_PM && GPIO_CS5535=y + depends on INPUT=y + select POWER_SUPPLY + ---help--- + Add support for SCI-based features of the OLPC XO-1 laptop: + - EC-driven system wakeups + - Power button + - Ebook switch + - Lid switch + - AC adapter status updates + - Battery status updates + +config OLPC_XO15_SCI + bool "OLPC XO-1.5 SCI extras" + depends on OLPC && ACPI + select POWER_SUPPLY + ---help--- + Add support for SCI-based features of the OLPC XO-1.5 laptop: + - EC-driven system wakeups + - AC adapter status updates + - Battery status updates + +config ALIX + bool "PCEngines ALIX System Support (LED setup)" + select GPIOLIB + ---help--- + This option enables system support for the PCEngines ALIX. + At present this just sets up LEDs for GPIO control on + ALIX2/3/6 boards. However, other system specific setup should + get added here. + + Note: You must still enable the drivers for GPIO and LED support + (GPIO_CS5535 & LEDS_GPIO) to actually use the LEDs + + Note: You have to set alix.force=1 for boards with Award BIOS. + +config NET5501 + bool "Soekris Engineering net5501 System Support (LEDS, GPIO, etc)" + select GPIOLIB + ---help--- + This option enables system support for the Soekris Engineering net5501. + +config GEOS + bool "Traverse Technologies GEOS System Support (LEDS, GPIO, etc)" + select GPIOLIB + depends on DMI + ---help--- + This option enables system support for the Traverse Technologies GEOS. + +config TS5500 + bool "Technologic Systems TS-5500 platform support" + depends on MELAN + select CHECK_SIGNATURE + select NEW_LEDS + select LEDS_CLASS + ---help--- + This option enables system support for the Technologic Systems TS-5500. + +endif # X86_32 + +config AMD_NB + def_bool y + depends on CPU_SUP_AMD && PCI + +source "drivers/pcmcia/Kconfig" + +config RAPIDIO + tristate "RapidIO support" + depends on PCI + default n + help + If enabled this option will include drivers and the core + infrastructure code to support RapidIO interconnect devices. + +source "drivers/rapidio/Kconfig" + +config X86_SYSFB + bool "Mark VGA/VBE/EFI FB as generic system framebuffer" + help + Firmwares often provide initial graphics framebuffers so the BIOS, + bootloader or kernel can show basic video-output during boot for + user-guidance and debugging. Historically, x86 used the VESA BIOS + Extensions and EFI-framebuffers for this, which are mostly limited + to x86. + This option, if enabled, marks VGA/VBE/EFI framebuffers as generic + framebuffers so the new generic system-framebuffer drivers can be + used on x86. If the framebuffer is not compatible with the generic + modes, it is advertised as fallback platform framebuffer so legacy + drivers like efifb, vesafb and uvesafb can pick it up. + If this option is not selected, all system framebuffers are always + marked as fallback platform framebuffers as usual. + + Note: Legacy fbdev drivers, including vesafb, efifb, uvesafb, will + not be able to pick up generic system framebuffers if this option + is selected. You are highly encouraged to enable simplefb as + replacement if you select this option. simplefb can correctly deal + with generic system framebuffers. But you should still keep vesafb + and others enabled as fallback if a system framebuffer is + incompatible with simplefb. + + If unsure, say Y. + +endmenu + + +menu "Binary Emulations" + +config IA32_EMULATION + bool "IA32 Emulation" + depends on X86_64 + select ARCH_WANT_OLD_COMPAT_IPC + select BINFMT_ELF + select COMPAT_BINFMT_ELF + select COMPAT_OLD_SIGACTION + ---help--- + Include code to run legacy 32-bit programs under a + 64-bit kernel. You should likely turn this on, unless you're + 100% sure that you don't have any 32-bit programs left. + +config IA32_AOUT + tristate "IA32 a.out support" + depends on IA32_EMULATION + ---help--- + Support old a.out binaries in the 32bit emulation. + +config X86_X32 + bool "x32 ABI for 64-bit mode" + depends on X86_64 + ---help--- + Include code to run binaries for the x32 native 32-bit ABI + for 64-bit processors. An x32 process gets access to the + full 64-bit register file and wide data path while leaving + pointers at 32 bits for smaller memory footprint. + + You will need a recent binutils (2.22 or later) with + elf32_x86_64 support enabled to compile a kernel with this + option set. + +config COMPAT_32 + def_bool y + depends on IA32_EMULATION || X86_32 + select HAVE_UID16 + select OLD_SIGSUSPEND3 + +config COMPAT + def_bool y + depends on IA32_EMULATION || X86_X32 + +if COMPAT +config COMPAT_FOR_U64_ALIGNMENT + def_bool y + +config SYSVIPC_COMPAT + def_bool y + depends on SYSVIPC +endif + +endmenu + + +config HAVE_ATOMIC_IOMAP + def_bool y + depends on X86_32 + +config X86_DEV_DMA_OPS + bool + depends on X86_64 || STA2X11 + +config X86_DMA_REMAP + bool + depends on STA2X11 + +config HAVE_GENERIC_GUP + def_bool y + +source "drivers/firmware/Kconfig" + +source "arch/x86/kvm/Kconfig" diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu new file mode 100644 index 000000000..638411f22 --- /dev/null +++ b/arch/x86/Kconfig.cpu @@ -0,0 +1,468 @@ +# SPDX-License-Identifier: GPL-2.0 +# Put here option for CPU selection and depending optimization +choice + prompt "Processor family" + default M686 if X86_32 + default GENERIC_CPU if X86_64 + ---help--- + This is the processor type of your CPU. This information is + used for optimizing purposes. In order to compile a kernel + that can run on all supported x86 CPU types (albeit not + optimally fast), you can specify "486" here. + + Note that the 386 is no longer supported, this includes + AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI 486DLC/DLC2, + UMC 486SX-S and the NexGen Nx586. + + The kernel will not necessarily run on earlier architectures than + the one you have chosen, e.g. a Pentium optimized kernel will run on + a PPro, but not necessarily on a i486. + + Here are the settings recommended for greatest speed: + - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or + SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. + - "586" for generic Pentium CPUs lacking the TSC + (time stamp counter) register. + - "Pentium-Classic" for the Intel Pentium. + - "Pentium-MMX" for the Intel Pentium MMX. + - "Pentium-Pro" for the Intel Pentium Pro. + - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron. + - "Pentium-III" for the Intel Pentium III or Coppermine Celeron. + - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron. + - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D). + - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird). + - "Opteron/Athlon64/Hammer/K8" for all K8 and newer AMD CPUs. + - "Crusoe" for the Transmeta Crusoe series. + - "Efficeon" for the Transmeta Efficeon series. + - "Winchip-C6" for original IDT Winchip. + - "Winchip-2" for IDT Winchips with 3dNow! capabilities. + - "AMD Elan" for the 32-bit AMD Elan embedded CPU. + - "GeodeGX1" for Geode GX1 (Cyrix MediaGX). + - "Geode GX/LX" For AMD Geode GX and LX processors. + - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3. + - "VIA C3-2" for VIA C3-2 "Nehemiah" (model 9 and above). + - "VIA C7" for VIA C7. + - "Intel P4" for the Pentium 4/Netburst microarchitecture. + - "Core 2/newer Xeon" for all core2 and newer Intel CPUs. + - "Intel Atom" for the Atom-microarchitecture CPUs. + - "Generic-x86-64" for a kernel which runs on any x86-64 CPU. + + See each option's help text for additional details. If you don't know + what to do, choose "486". + +config M486 + bool "486" + depends on X86_32 + ---help--- + Select this for an 486-class CPU such as AMD/Cyrix/IBM/Intel + 486DX/DX2/DX4 or SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. + +config M586 + bool "586/K5/5x86/6x86/6x86MX" + depends on X86_32 + ---help--- + Select this for an 586 or 686 series processor such as the AMD K5, + the Cyrix 5x86, 6x86 and 6x86MX. This choice does not + assume the RDTSC (Read Time Stamp Counter) instruction. + +config M586TSC + bool "Pentium-Classic" + depends on X86_32 + ---help--- + Select this for a Pentium Classic processor with the RDTSC (Read + Time Stamp Counter) instruction for benchmarking. + +config M586MMX + bool "Pentium-MMX" + depends on X86_32 + ---help--- + Select this for a Pentium with the MMX graphics/multimedia + extended instructions. + +config M686 + bool "Pentium-Pro" + depends on X86_32 + ---help--- + Select this for Intel Pentium Pro chips. This enables the use of + Pentium Pro extended instructions, and disables the init-time guard + against the f00f bug found in earlier Pentiums. + +config MPENTIUMII + bool "Pentium-II/Celeron(pre-Coppermine)" + depends on X86_32 + ---help--- + Select this for Intel chips based on the Pentium-II and + pre-Coppermine Celeron core. This option enables an unaligned + copy optimization, compiles the kernel with optimization flags + tailored for the chip, and applies any applicable Pentium Pro + optimizations. + +config MPENTIUMIII + bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon" + depends on X86_32 + ---help--- + Select this for Intel chips based on the Pentium-III and + Celeron-Coppermine core. This option enables use of some + extended prefetch instructions in addition to the Pentium II + extensions. + +config MPENTIUMM + bool "Pentium M" + depends on X86_32 + ---help--- + Select this for Intel Pentium M (not Pentium-4 M) + notebook chips. + +config MPENTIUM4 + bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon" + depends on X86_32 + ---help--- + Select this for Intel Pentium 4 chips. This includes the + Pentium 4, Pentium D, P4-based Celeron and Xeon, and + Pentium-4 M (not Pentium M) chips. This option enables compile + flags optimized for the chip, uses the correct cache line size, and + applies any applicable optimizations. + + CPUIDs: F[0-6][1-A] (in /proc/cpuinfo show = cpu family : 15 ) + + Select this for: + Pentiums (Pentium 4, Pentium D, Celeron, Celeron D) corename: + -Willamette + -Northwood + -Mobile Pentium 4 + -Mobile Pentium 4 M + -Extreme Edition (Gallatin) + -Prescott + -Prescott 2M + -Cedar Mill + -Presler + -Smithfiled + Xeons (Intel Xeon, Xeon MP, Xeon LV, Xeon MV) corename: + -Foster + -Prestonia + -Gallatin + -Nocona + -Irwindale + -Cranford + -Potomac + -Paxville + -Dempsey + + +config MK6 + bool "K6/K6-II/K6-III" + depends on X86_32 + ---help--- + Select this for an AMD K6-family processor. Enables use of + some extended instructions, and passes appropriate optimization + flags to GCC. + +config MK7 + bool "Athlon/Duron/K7" + depends on X86_32 + ---help--- + Select this for an AMD Athlon K7-family processor. Enables use of + some extended instructions, and passes appropriate optimization + flags to GCC. + +config MK8 + bool "Opteron/Athlon64/Hammer/K8" + ---help--- + Select this for an AMD Opteron or Athlon64 Hammer-family processor. + Enables use of some extended instructions, and passes appropriate + optimization flags to GCC. + +config MCRUSOE + bool "Crusoe" + depends on X86_32 + ---help--- + Select this for a Transmeta Crusoe processor. Treats the processor + like a 586 with TSC, and sets some GCC optimization flags (like a + Pentium Pro with no alignment requirements). + +config MEFFICEON + bool "Efficeon" + depends on X86_32 + ---help--- + Select this for a Transmeta Efficeon processor. + +config MWINCHIPC6 + bool "Winchip-C6" + depends on X86_32 + ---help--- + Select this for an IDT Winchip C6 chip. Linux and GCC + treat this chip as a 586TSC with some extended instructions + and alignment requirements. + +config MWINCHIP3D + bool "Winchip-2/Winchip-2A/Winchip-3" + depends on X86_32 + ---help--- + Select this for an IDT Winchip-2, 2A or 3. Linux and GCC + treat this chip as a 586TSC with some extended instructions + and alignment requirements. Also enable out of order memory + stores for this CPU, which can increase performance of some + operations. + +config MELAN + bool "AMD Elan" + depends on X86_32 + ---help--- + Select this for an AMD Elan processor. + + Do not use this option for K6/Athlon/Opteron processors! + +config MGEODEGX1 + bool "GeodeGX1" + depends on X86_32 + ---help--- + Select this for a Geode GX1 (Cyrix MediaGX) chip. + +config MGEODE_LX + bool "Geode GX/LX" + depends on X86_32 + ---help--- + Select this for AMD Geode GX and LX processors. + +config MCYRIXIII + bool "CyrixIII/VIA-C3" + depends on X86_32 + ---help--- + Select this for a Cyrix III or C3 chip. Presently Linux and GCC + treat this chip as a generic 586. Whilst the CPU is 686 class, + it lacks the cmov extension which gcc assumes is present when + generating 686 code. + Note that Nehemiah (Model 9) and above will not boot with this + kernel due to them lacking the 3DNow! instructions used in earlier + incarnations of the CPU. + +config MVIAC3_2 + bool "VIA C3-2 (Nehemiah)" + depends on X86_32 + ---help--- + Select this for a VIA C3 "Nehemiah". Selecting this enables usage + of SSE and tells gcc to treat the CPU as a 686. + Note, this kernel will not boot on older (pre model 9) C3s. + +config MVIAC7 + bool "VIA C7" + depends on X86_32 + ---help--- + Select this for a VIA C7. Selecting this uses the correct cache + shift and tells gcc to treat the CPU as a 686. + +config MPSC + bool "Intel P4 / older Netburst based Xeon" + depends on X86_64 + ---help--- + Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey + Xeon CPUs with Intel 64bit which is compatible with x86-64. + Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the + Netburst core and shouldn't use this option. You can distinguish them + using the cpu family field + in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one. + +config MCORE2 + bool "Core 2/newer Xeon" + ---help--- + + Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and + 53xx) CPUs. You can distinguish newer from older Xeons by the CPU + family in /proc/cpuinfo. Newer ones have 6 and older ones 15 + (not a typo) + +config MATOM + bool "Intel Atom" + ---help--- + + Select this for the Intel Atom platform. Intel Atom CPUs have an + in-order pipelining architecture and thus can benefit from + accordingly optimized code. Use a recent GCC with specific Atom + support in order to fully benefit from selecting this option. + +config GENERIC_CPU + bool "Generic-x86-64" + depends on X86_64 + ---help--- + Generic x86-64 CPU. + Run equally well on all x86-64 CPUs. + +endchoice + +config X86_GENERIC + bool "Generic x86 support" + depends on X86_32 + ---help--- + Instead of just including optimizations for the selected + x86 variant (e.g. PII, Crusoe or Athlon), include some more + generic optimizations as well. This will make the kernel + perform better on x86 CPUs other than that selected. + + This is really intended for distributors who need more + generic optimizations. + +# +# Define implied options from the CPU selection here +config X86_INTERNODE_CACHE_SHIFT + int + default "12" if X86_VSMP + default X86_L1_CACHE_SHIFT + +config X86_L1_CACHE_SHIFT + int + default "7" if MPENTIUM4 || MPSC + default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU + default "4" if MELAN || M486 || MGEODEGX1 + default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX + +config X86_F00F_BUG + def_bool y + depends on M586MMX || M586TSC || M586 || M486 + +config X86_INVD_BUG + def_bool y + depends on M486 + +config X86_ALIGNMENT_16 + def_bool y + depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1 + +config X86_INTEL_USERCOPY + def_bool y + depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2 + +config X86_USE_PPRO_CHECKSUM + def_bool y + depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MVIAC7 || MEFFICEON || MGEODE_LX || MCORE2 || MATOM + +config X86_USE_3DNOW + def_bool y + depends on (MCYRIXIII || MK7 || MGEODE_LX) && !UML + +# +# P6_NOPs are a relatively minor optimization that require a family >= +# 6 processor, except that it is broken on certain VIA chips. +# Furthermore, AMD chips prefer a totally different sequence of NOPs +# (which work on all CPUs). In addition, it looks like Virtual PC +# does not understand them. +# +# As a result, disallow these if we're not compiling for X86_64 (these +# NOPs do work on all x86-64 capable chips); the list of processors in +# the right-hand clause are the cores that benefit from this optimization. +# +config X86_P6_NOP + def_bool y + depends on X86_64 + depends on (MCORE2 || MPENTIUM4 || MPSC) + +config X86_TSC + def_bool y + depends on (MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) || X86_64 + +config X86_CMPXCHG64 + def_bool y + depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586TSC || M586MMX || MATOM || MGEODE_LX || MGEODEGX1 || MK6 || MK7 || MK8 + +# this should be set for all -march=.. options where the compiler +# generates cmov. +config X86_CMOV + def_bool y + depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM || MGEODE_LX) + +config X86_MINIMUM_CPU_FAMILY + int + default "64" if X86_64 + default "6" if X86_32 && (MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MEFFICEON || MATOM || MCRUSOE || MCORE2 || MK7 || MK8) + default "5" if X86_32 && X86_CMPXCHG64 + default "4" + +config X86_DEBUGCTLMSR + def_bool y + depends on !(MK6 || MWINCHIPC6 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486) && !UML + +menuconfig PROCESSOR_SELECT + bool "Supported processor vendors" if EXPERT + ---help--- + This lets you choose what x86 vendor support code your kernel + will include. + +config CPU_SUP_INTEL + default y + bool "Support Intel processors" if PROCESSOR_SELECT + ---help--- + This enables detection, tunings and quirks for Intel processors + + You need this enabled if you want your kernel to run on an + Intel CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on an Intel + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_CYRIX_32 + default y + bool "Support Cyrix processors" if PROCESSOR_SELECT + depends on M486 || M586 || M586TSC || M586MMX || (EXPERT && !64BIT) + ---help--- + This enables detection, tunings and quirks for Cyrix processors + + You need this enabled if you want your kernel to run on a + Cyrix CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Cyrix + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_AMD + default y + bool "Support AMD processors" if PROCESSOR_SELECT + ---help--- + This enables detection, tunings and quirks for AMD processors + + You need this enabled if you want your kernel to run on an + AMD CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on an AMD + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_CENTAUR + default y + bool "Support Centaur processors" if PROCESSOR_SELECT + ---help--- + This enables detection, tunings and quirks for Centaur processors + + You need this enabled if you want your kernel to run on a + Centaur CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Centaur + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_TRANSMETA_32 + default y + bool "Support Transmeta processors" if PROCESSOR_SELECT + depends on !64BIT + ---help--- + This enables detection, tunings and quirks for Transmeta processors + + You need this enabled if you want your kernel to run on a + Transmeta CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Transmeta + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_UMC_32 + default y + bool "Support UMC processors" if PROCESSOR_SELECT + depends on M486 || (EXPERT && !64BIT) + ---help--- + This enables detection, tunings and quirks for UMC processors + + You need this enabled if you want your kernel to run on a + UMC CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a UMC + CPU might render the kernel unbootable. + + If unsure, say N. diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug new file mode 100644 index 000000000..687cd1a21 --- /dev/null +++ b/arch/x86/Kconfig.debug @@ -0,0 +1,409 @@ +# SPDX-License-Identifier: GPL-2.0 + +config TRACE_IRQFLAGS_SUPPORT + def_bool y + +config EARLY_PRINTK_USB + bool + +config X86_VERBOSE_BOOTUP + bool "Enable verbose x86 bootup info messages" + default y + ---help--- + Enables the informational output from the decompression stage + (e.g. bzImage) of the boot. If you disable this you will still + see errors. Disable this if you want silent bootup. + +config EARLY_PRINTK + bool "Early printk" if EXPERT + default y + ---help--- + Write kernel log output directly into the VGA buffer or to a serial + port. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. For normal operation + it is not recommended because it looks ugly and doesn't cooperate + with klogd/syslogd or the X server. You should normally say N here, + unless you want to debug such a crash. + +config EARLY_PRINTK_DBGP + bool "Early printk via EHCI debug port" + depends on EARLY_PRINTK && PCI + select EARLY_PRINTK_USB + ---help--- + Write kernel log output directly into the EHCI debug port. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. For normal operation + it is not recommended because it looks ugly and doesn't cooperate + with klogd/syslogd or the X server. You should normally say N here, + unless you want to debug such a crash. You need usb debug device. + +config EARLY_PRINTK_EFI + bool "Early printk via the EFI framebuffer" + depends on EFI && EARLY_PRINTK + select FONT_SUPPORT + ---help--- + Write kernel log output directly into the EFI framebuffer. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. + +config EARLY_PRINTK_USB_XDBC + bool "Early printk via the xHCI debug port" + depends on EARLY_PRINTK && PCI + select EARLY_PRINTK_USB + ---help--- + Write kernel log output directly into the xHCI debug port. + + One use for this feature is kernel debugging, for example when your + machine crashes very early before the regular console code is + initialized. Other uses include simpler, lockless logging instead of + a full-blown printk console driver + klogd. + + For normal production environments this is normally not recommended, + because it doesn't feed events into klogd/syslogd and doesn't try to + print anything on the screen. + + You should normally say N here, unless you want to debug early + crashes or need a very simple printk logging facility. + +config MCSAFE_TEST + def_bool n + +config X86_PTDUMP_CORE + def_bool n + +config X86_PTDUMP + tristate "Export kernel pagetable layout to userspace via debugfs" + depends on DEBUG_KERNEL + select DEBUG_FS + select X86_PTDUMP_CORE + ---help--- + Say Y here if you want to show the kernel pagetable layout in a + debugfs file. This information is only useful for kernel developers + who are working in architecture specific areas of the kernel. + It is probably not a good idea to enable this feature in a production + kernel. + If in doubt, say "N" + +config EFI_PGT_DUMP + bool "Dump the EFI pagetable" + depends on EFI + select X86_PTDUMP_CORE + ---help--- + Enable this if you want to dump the EFI page table before + enabling virtual mode. This can be used to debug miscellaneous + issues with the mapping of the EFI runtime regions into that + table. + +config DEBUG_WX + bool "Warn on W+X mappings at boot" + select X86_PTDUMP_CORE + ---help--- + Generate a warning if any W+X mappings are found at boot. + + This is useful for discovering cases where the kernel is leaving + W+X mappings after applying NX, as such mappings are a security risk. + + Look for a message in dmesg output like this: + + x86/mm: Checked W+X mappings: passed, no W+X pages found. + + or like this, if the check failed: + + x86/mm: Checked W+X mappings: FAILED, <N> W+X pages found. + + Note that even if the check fails, your kernel is possibly + still fine, as W+X mappings are not a security hole in + themselves, what they do is that they make the exploitation + of other unfixed kernel bugs easier. + + There is no runtime or memory usage effect of this option + once the kernel has booted up - it's a one time check. + + If in doubt, say "Y". + +config DOUBLEFAULT + default y + bool "Enable doublefault exception handler" if EXPERT + ---help--- + This option allows trapping of rare doublefault exceptions that + would otherwise cause a system to silently reboot. Disabling this + option saves about 4k and might cause you much additional grey + hair. + +config DEBUG_TLBFLUSH + bool "Set upper limit of TLB entries to flush one-by-one" + depends on DEBUG_KERNEL + ---help--- + + X86-only for now. + + This option allows the user to tune the amount of TLB entries the + kernel flushes one-by-one instead of doing a full TLB flush. In + certain situations, the former is cheaper. This is controlled by the + tlb_flushall_shift knob under /sys/kernel/debug/x86. If you set it + to -1, the code flushes the whole TLB unconditionally. Otherwise, + for positive values of it, the kernel will use single TLB entry + invalidating instructions according to the following formula: + + flush_entries <= active_tlb_entries / 2^tlb_flushall_shift + + If in doubt, say "N". + +config IOMMU_DEBUG + bool "Enable IOMMU debugging" + depends on GART_IOMMU && DEBUG_KERNEL + depends on X86_64 + ---help--- + Force the IOMMU to on even when you have less than 4GB of + memory and add debugging code. On overflow always panic. And + allow to enable IOMMU leak tracing. Can be disabled at boot + time with iommu=noforce. This will also enable scatter gather + list merging. Currently not recommended for production + code. When you use it make sure you have a big enough + IOMMU/AGP aperture. Most of the options enabled by this can + be set more finegrained using the iommu= command line + options. See Documentation/x86/x86_64/boot-options.txt for more + details. + +config IOMMU_LEAK + bool "IOMMU leak tracing" + depends on IOMMU_DEBUG && DMA_API_DEBUG + ---help--- + Add a simple leak tracer to the IOMMU code. This is useful when you + are debugging a buggy device driver that leaks IOMMU mappings. + +config HAVE_MMIOTRACE_SUPPORT + def_bool y + +config X86_DECODER_SELFTEST + bool "x86 instruction decoder selftest" + depends on DEBUG_KERNEL && INSTRUCTION_DECODER + depends on !COMPILE_TEST + ---help--- + Perform x86 instruction decoder selftests at build time. + This option is useful for checking the sanity of x86 instruction + decoder code. + If unsure, say "N". + +# +# IO delay types: +# + +config IO_DELAY_TYPE_0X80 + int + default "0" + +config IO_DELAY_TYPE_0XED + int + default "1" + +config IO_DELAY_TYPE_UDELAY + int + default "2" + +config IO_DELAY_TYPE_NONE + int + default "3" + +choice + prompt "IO delay type" + default IO_DELAY_0X80 + +config IO_DELAY_0X80 + bool "port 0x80 based port-IO delay [recommended]" + ---help--- + This is the traditional Linux IO delay used for in/out_p. + It is the most tested hence safest selection here. + +config IO_DELAY_0XED + bool "port 0xed based port-IO delay" + ---help--- + Use port 0xed as the IO delay. This frees up port 0x80 which is + often used as a hardware-debug port. + +config IO_DELAY_UDELAY + bool "udelay based port-IO delay" + ---help--- + Use udelay(2) as the IO delay method. This provides the delay + while not having any side-effect on the IO port space. + +config IO_DELAY_NONE + bool "no port-IO delay" + ---help--- + No port-IO delay. Will break on old boxes that require port-IO + delay for certain operations. Should work on most new machines. + +endchoice + +if IO_DELAY_0X80 +config DEFAULT_IO_DELAY_TYPE + int + default IO_DELAY_TYPE_0X80 +endif + +if IO_DELAY_0XED +config DEFAULT_IO_DELAY_TYPE + int + default IO_DELAY_TYPE_0XED +endif + +if IO_DELAY_UDELAY +config DEFAULT_IO_DELAY_TYPE + int + default IO_DELAY_TYPE_UDELAY +endif + +if IO_DELAY_NONE +config DEFAULT_IO_DELAY_TYPE + int + default IO_DELAY_TYPE_NONE +endif + +config DEBUG_BOOT_PARAMS + bool "Debug boot parameters" + depends on DEBUG_KERNEL + depends on DEBUG_FS + ---help--- + This option will cause struct boot_params to be exported via debugfs. + +config CPA_DEBUG + bool "CPA self-test code" + depends on DEBUG_KERNEL + ---help--- + Do change_page_attr() self-tests every 30 seconds. + +config OPTIMIZE_INLINING + bool "Allow gcc to uninline functions marked 'inline'" + ---help--- + This option determines if the kernel forces gcc to inline the functions + developers have marked 'inline'. Doing so takes away freedom from gcc to + do what it thinks is best, which is desirable for the gcc 3.x series of + compilers. The gcc 4.x series have a rewritten inlining algorithm and + enabling this option will generate a smaller kernel there. Hopefully + this algorithm is so good that allowing gcc 4.x and above to make the + decision will become the default in the future. Until then this option + is there to test gcc for this. + + If unsure, say N. + +config DEBUG_ENTRY + bool "Debug low-level entry code" + depends on DEBUG_KERNEL + ---help--- + This option enables sanity checks in x86's low-level entry code. + Some of these sanity checks may slow down kernel entries and + exits or otherwise impact performance. + + If unsure, say N. + +config DEBUG_NMI_SELFTEST + bool "NMI Selftest" + depends on DEBUG_KERNEL && X86_LOCAL_APIC + ---help--- + Enabling this option turns on a quick NMI selftest to verify + that the NMI behaves correctly. + + This might help diagnose strange hangs that rely on NMI to + function properly. + + If unsure, say N. + +config DEBUG_IMR_SELFTEST + bool "Isolated Memory Region self test" + default n + depends on INTEL_IMR + ---help--- + This option enables automated sanity testing of the IMR code. + Some simple tests are run to verify IMR bounds checking, alignment + and overlapping. This option is really only useful if you are + debugging an IMR memory map or are modifying the IMR code and want to + test your changes. + + If unsure say N here. + +config X86_DEBUG_FPU + bool "Debug the x86 FPU code" + depends on DEBUG_KERNEL + default y + ---help--- + If this option is enabled then there will be extra sanity + checks and (boot time) debug printouts added to the kernel. + This debugging adds some small amount of runtime overhead + to the kernel. + + If unsure, say N. + +config PUNIT_ATOM_DEBUG + tristate "ATOM Punit debug driver" + depends on PCI + select DEBUG_FS + select IOSF_MBI + ---help--- + This is a debug driver, which gets the power states + of all Punit North Complex devices. The power states of + each device is exposed as part of the debugfs interface. + The current power state can be read from + /sys/kernel/debug/punit_atom/dev_power_state + +choice + prompt "Choose kernel unwinder" + default UNWINDER_ORC if X86_64 + default UNWINDER_FRAME_POINTER if X86_32 + ---help--- + This determines which method will be used for unwinding kernel stack + traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack, + livepatch, lockdep, and more. + +config UNWINDER_ORC + bool "ORC unwinder" + depends on X86_64 + select STACK_VALIDATION + ---help--- + This option enables the ORC (Oops Rewind Capability) unwinder for + unwinding kernel stack traces. It uses a custom data format which is + a simplified version of the DWARF Call Frame Information standard. + + This unwinder is more accurate across interrupt entry frames than the + frame pointer unwinder. It also enables a 5-10% performance + improvement across the entire kernel compared to frame pointers. + + Enabling this option will increase the kernel's runtime memory usage + by roughly 2-4MB, depending on your kernel config. + +config UNWINDER_FRAME_POINTER + bool "Frame pointer unwinder" + select FRAME_POINTER + ---help--- + This option enables the frame pointer unwinder for unwinding kernel + stack traces. + + The unwinder itself is fast and it uses less RAM than the ORC + unwinder, but the kernel text size will grow by ~3% and the kernel's + overall performance will degrade by roughly 5-10%. + + This option is recommended if you want to use the livepatch + consistency model, as this is currently the only way to get a + reliable stack trace (CONFIG_HAVE_RELIABLE_STACKTRACE). + +config UNWINDER_GUESS + bool "Guess unwinder" + depends on EXPERT + depends on !STACKDEPOT + ---help--- + This option enables the "guess" unwinder for unwinding kernel stack + traces. It scans the stack and reports every kernel text address it + finds. Some of the addresses it reports may be incorrect. + + While this option often produces false positives, it can still be + useful in many cases. Unlike the other unwinders, it has no runtime + overhead. + +endchoice + +config FRAME_POINTER + depends on !UNWINDER_ORC && !UNWINDER_GUESS + bool |