diff options
Diffstat (limited to 'arch/x86/entry/entry_32.S')
| -rw-r--r-- | arch/x86/entry/entry_32.S | 1514 |
1 files changed, 1514 insertions, 0 deletions
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S new file mode 100644 index 000000000..37d9016d4 --- /dev/null +++ b/arch/x86/entry/entry_32.S @@ -0,0 +1,1514 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 1991,1992 Linus Torvalds + * + * entry_32.S contains the system-call and low-level fault and trap handling routines. + * + * Stack layout while running C code: + * ptrace needs to have all registers on the stack. + * If the order here is changed, it needs to be + * updated in fork.c:copy_process(), signal.c:do_signal(), + * ptrace.c and ptrace.h + * + * 0(%esp) - %ebx + * 4(%esp) - %ecx + * 8(%esp) - %edx + * C(%esp) - %esi + * 10(%esp) - %edi + * 14(%esp) - %ebp + * 18(%esp) - %eax + * 1C(%esp) - %ds + * 20(%esp) - %es + * 24(%esp) - %fs + * 28(%esp) - %gs saved iff !CONFIG_X86_32_LAZY_GS + * 2C(%esp) - orig_eax + * 30(%esp) - %eip + * 34(%esp) - %cs + * 38(%esp) - %eflags + * 3C(%esp) - %oldesp + * 40(%esp) - %oldss + */ + +#include <linux/linkage.h> +#include <linux/err.h> +#include <asm/thread_info.h> +#include <asm/irqflags.h> +#include <asm/errno.h> +#include <asm/segment.h> +#include <asm/smp.h> +#include <asm/percpu.h> +#include <asm/processor-flags.h> +#include <asm/irq_vectors.h> +#include <asm/cpufeatures.h> +#include <asm/alternative-asm.h> +#include <asm/asm.h> +#include <asm/smap.h> +#include <asm/frame.h> +#include <asm/nospec-branch.h> + + .section .entry.text, "ax" + +/* + * We use macros for low-level operations which need to be overridden + * for paravirtualization. The following will never clobber any registers: + * INTERRUPT_RETURN (aka. "iret") + * GET_CR0_INTO_EAX (aka. "movl %cr0, %eax") + * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit"). + * + * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must + * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY). + * Allowing a register to be clobbered can shrink the paravirt replacement + * enough to patch inline, increasing performance. + */ + +#ifdef CONFIG_PREEMPT +# define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF +#else +# define preempt_stop(clobbers) +# define resume_kernel restore_all_kernel +#endif + +.macro TRACE_IRQS_IRET +#ifdef CONFIG_TRACE_IRQFLAGS + testl $X86_EFLAGS_IF, PT_EFLAGS(%esp) # interrupts off? + jz 1f + TRACE_IRQS_ON +1: +#endif +.endm + +#define PTI_SWITCH_MASK (1 << PAGE_SHIFT) + +/* + * User gs save/restore + * + * %gs is used for userland TLS and kernel only uses it for stack + * canary which is required to be at %gs:20 by gcc. Read the comment + * at the top of stackprotector.h for more info. + * + * Local labels 98 and 99 are used. + */ +#ifdef CONFIG_X86_32_LAZY_GS + + /* unfortunately push/pop can't be no-op */ +.macro PUSH_GS + pushl $0 +.endm +.macro POP_GS pop=0 + addl $(4 + \pop), %esp +.endm +.macro POP_GS_EX +.endm + + /* all the rest are no-op */ +.macro PTGS_TO_GS +.endm +.macro PTGS_TO_GS_EX +.endm +.macro GS_TO_REG reg +.endm +.macro REG_TO_PTGS reg +.endm +.macro SET_KERNEL_GS reg +.endm + +#else /* CONFIG_X86_32_LAZY_GS */ + +.macro PUSH_GS + pushl %gs +.endm + +.macro POP_GS pop=0 +98: popl %gs + .if \pop <> 0 + add $\pop, %esp + .endif +.endm +.macro POP_GS_EX +.pushsection .fixup, "ax" +99: movl $0, (%esp) + jmp 98b +.popsection + _ASM_EXTABLE(98b, 99b) +.endm + +.macro PTGS_TO_GS +98: mov PT_GS(%esp), %gs +.endm +.macro PTGS_TO_GS_EX +.pushsection .fixup, "ax" +99: movl $0, PT_GS(%esp) + jmp 98b +.popsection + _ASM_EXTABLE(98b, 99b) +.endm + +.macro GS_TO_REG reg + movl %gs, \reg +.endm +.macro REG_TO_PTGS reg + movl \reg, PT_GS(%esp) +.endm +.macro SET_KERNEL_GS reg + movl $(__KERNEL_STACK_CANARY), \reg + movl \reg, %gs +.endm + +#endif /* CONFIG_X86_32_LAZY_GS */ + +/* Unconditionally switch to user cr3 */ +.macro SWITCH_TO_USER_CR3 scratch_reg:req + ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI + + movl %cr3, \scratch_reg + orl $PTI_SWITCH_MASK, \scratch_reg + movl \scratch_reg, %cr3 +.Lend_\@: +.endm + +.macro BUG_IF_WRONG_CR3 no_user_check=0 +#ifdef CONFIG_DEBUG_ENTRY + ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI + .if \no_user_check == 0 + /* coming from usermode? */ + testl $SEGMENT_RPL_MASK, PT_CS(%esp) + jz .Lend_\@ + .endif + /* On user-cr3? */ + movl %cr3, %eax + testl $PTI_SWITCH_MASK, %eax + jnz .Lend_\@ + /* From userspace with kernel cr3 - BUG */ + ud2 +.Lend_\@: +#endif +.endm + +/* + * Switch to kernel cr3 if not already loaded and return current cr3 in + * \scratch_reg + */ +.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req + ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI + movl %cr3, \scratch_reg + /* Test if we are already on kernel CR3 */ + testl $PTI_SWITCH_MASK, \scratch_reg + jz .Lend_\@ + andl $(~PTI_SWITCH_MASK), \scratch_reg + movl \scratch_reg, %cr3 + /* Return original CR3 in \scratch_reg */ + orl $PTI_SWITCH_MASK, \scratch_reg +.Lend_\@: +.endm + +.macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0 + cld + PUSH_GS + pushl %fs + pushl %es + pushl %ds + pushl \pt_regs_ax + pushl %ebp + pushl %edi + pushl %esi + pushl %edx + pushl %ecx + pushl %ebx + movl $(__USER_DS), %edx + movl %edx, %ds + movl %edx, %es + movl $(__KERNEL_PERCPU), %edx + movl %edx, %fs + SET_KERNEL_GS %edx + + /* Switch to kernel stack if necessary */ +.if \switch_stacks > 0 + SWITCH_TO_KERNEL_STACK +.endif + +.endm + +.macro SAVE_ALL_NMI cr3_reg:req + SAVE_ALL + + BUG_IF_WRONG_CR3 + + /* + * Now switch the CR3 when PTI is enabled. + * + * We can enter with either user or kernel cr3, the code will + * store the old cr3 in \cr3_reg and switches to the kernel cr3 + * if necessary. + */ + SWITCH_TO_KERNEL_CR3 scratch_reg=\cr3_reg + +.Lend_\@: +.endm + +.macro RESTORE_INT_REGS + popl %ebx + popl %ecx + popl %edx + popl %esi + popl %edi + popl %ebp + popl %eax +.endm + +.macro RESTORE_REGS pop=0 + RESTORE_INT_REGS +1: popl %ds +2: popl %es +3: popl %fs + POP_GS \pop +.pushsection .fixup, "ax" +4: movl $0, (%esp) + jmp 1b +5: movl $0, (%esp) + jmp 2b +6: movl $0, (%esp) + jmp 3b +.popsection + _ASM_EXTABLE(1b, 4b) + _ASM_EXTABLE(2b, 5b) + _ASM_EXTABLE(3b, 6b) + POP_GS_EX +.endm + +.macro RESTORE_ALL_NMI cr3_reg:req pop=0 + /* + * Now switch the CR3 when PTI is enabled. + * + * We enter with kernel cr3 and switch the cr3 to the value + * stored on \cr3_reg, which is either a user or a kernel cr3. + */ + ALTERNATIVE "jmp .Lswitched_\@", "", X86_FEATURE_PTI + + testl $PTI_SWITCH_MASK, \cr3_reg + jz .Lswitched_\@ + + /* User cr3 in \cr3_reg - write it to hardware cr3 */ + movl \cr3_reg, %cr3 + +.Lswitched_\@: + + BUG_IF_WRONG_CR3 + + RESTORE_REGS pop=\pop +.endm + +.macro CHECK_AND_APPLY_ESPFIX +#ifdef CONFIG_X86_ESPFIX32 +#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8) + + ALTERNATIVE "jmp .Lend_\@", "", X86_BUG_ESPFIX + + movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS + /* + * Warning: PT_OLDSS(%esp) contains the wrong/random values if we + * are returning to the kernel. + * See comments in process.c:copy_thread() for details. + */ + movb PT_OLDSS(%esp), %ah + movb PT_CS(%esp), %al + andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax + cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax + jne .Lend_\@ # returning to user-space with LDT SS + + /* + * Setup and switch to ESPFIX stack + * + * We're returning to userspace with a 16 bit stack. The CPU will not + * restore the high word of ESP for us on executing iret... This is an + * "official" bug of all the x86-compatible CPUs, which we can work + * around to make dosemu and wine happy. We do this by preloading the + * high word of ESP with the high word of the userspace ESP while + * compensating for the offset by changing to the ESPFIX segment with + * a base address that matches for the difference. + */ + mov %esp, %edx /* load kernel esp */ + mov PT_OLDESP(%esp), %eax /* load userspace esp */ + mov %dx, %ax /* eax: new kernel esp */ + sub %eax, %edx /* offset (low word is 0) */ + shr $16, %edx + mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */ + mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */ + pushl $__ESPFIX_SS + pushl %eax /* new kernel esp */ + /* + * Disable interrupts, but do not irqtrace this section: we + * will soon execute iret and the tracer was already set to + * the irqstate after the IRET: + */ + DISABLE_INTERRUPTS(CLBR_ANY) + lss (%esp), %esp /* switch to espfix segment */ +.Lend_\@: +#endif /* CONFIG_X86_ESPFIX32 */ +.endm + +/* + * Called with pt_regs fully populated and kernel segments loaded, + * so we can access PER_CPU and use the integer registers. + * + * We need to be very careful here with the %esp switch, because an NMI + * can happen everywhere. If the NMI handler finds itself on the + * entry-stack, it will overwrite the task-stack and everything we + * copied there. So allocate the stack-frame on the task-stack and + * switch to it before we do any copying. + */ + +#define CS_FROM_ENTRY_STACK (1 << 31) +#define CS_FROM_USER_CR3 (1 << 30) + +.macro SWITCH_TO_KERNEL_STACK + + ALTERNATIVE "", "jmp .Lend_\@", X86_FEATURE_XENPV + + BUG_IF_WRONG_CR3 + + SWITCH_TO_KERNEL_CR3 scratch_reg=%eax + + /* + * %eax now contains the entry cr3 and we carry it forward in + * that register for the time this macro runs + */ + + /* + * The high bits of the CS dword (__csh) are used for + * CS_FROM_ENTRY_STACK and CS_FROM_USER_CR3. Clear them in case + * hardware didn't do this for us. + */ + andl $(0x0000ffff), PT_CS(%esp) + + /* Are we on the entry stack? Bail out if not! */ + movl PER_CPU_VAR(cpu_entry_area), %ecx + addl $CPU_ENTRY_AREA_entry_stack + SIZEOF_entry_stack, %ecx + subl %esp, %ecx /* ecx = (end of entry_stack) - esp */ + cmpl $SIZEOF_entry_stack, %ecx + jae .Lend_\@ + + /* Load stack pointer into %esi and %edi */ + movl %esp, %esi + movl %esi, %edi + + /* Move %edi to the top of the entry stack */ + andl $(MASK_entry_stack), %edi + addl $(SIZEOF_entry_stack), %edi + + /* Load top of task-stack into %edi */ + movl TSS_entry2task_stack(%edi), %edi + + /* Special case - entry from kernel mode via entry stack */ +#ifdef CONFIG_VM86 + movl PT_EFLAGS(%esp), %ecx # mix EFLAGS and CS + movb PT_CS(%esp), %cl + andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %ecx +#else + movl PT_CS(%esp), %ecx + andl $SEGMENT_RPL_MASK, %ecx +#endif + cmpl $USER_RPL, %ecx + jb .Lentry_from_kernel_\@ + + /* Bytes to copy */ + movl $PTREGS_SIZE, %ecx + +#ifdef CONFIG_VM86 + testl $X86_EFLAGS_VM, PT_EFLAGS(%esi) + jz .Lcopy_pt_regs_\@ + + /* + * Stack-frame contains 4 additional segment registers when + * coming from VM86 mode + */ + addl $(4 * 4), %ecx + +#endif +.Lcopy_pt_regs_\@: + + /* Allocate frame on task-stack */ + subl %ecx, %edi + + /* Switch to task-stack */ + movl %edi, %esp + + /* + * We are now on the task-stack and can safely copy over the + * stack-frame + */ + shrl $2, %ecx + cld + rep movsl + + jmp .Lend_\@ + +.Lentry_from_kernel_\@: + + /* + * This handles the case when we enter the kernel from + * kernel-mode and %esp points to the entry-stack. When this + * happens we need to switch to the task-stack to run C code, + * but switch back to the entry-stack again when we approach + * iret and return to the interrupted code-path. This usually + * happens when we hit an exception while restoring user-space + * segment registers on the way back to user-space or when the + * sysenter handler runs with eflags.tf set. + * + * When we switch to the task-stack here, we can't trust the + * contents of the entry-stack anymore, as the exception handler + * might be scheduled out or moved to another CPU. Therefore we + * copy the complete entry-stack to the task-stack and set a + * marker in the iret-frame (bit 31 of the CS dword) to detect + * what we've done on the iret path. + * + * On the iret path we copy everything back and switch to the + * entry-stack, so that the interrupted kernel code-path + * continues on the same stack it was interrupted with. + * + * Be aware that an NMI can happen anytime in this code. + * + * %esi: Entry-Stack pointer (same as %esp) + * %edi: Top of the task stack + * %eax: CR3 on kernel entry + */ + + /* Calculate number of bytes on the entry stack in %ecx */ + movl %esi, %ecx + + /* %ecx to the top of entry-stack */ + andl $(MASK_entry_stack), %ecx + addl $(SIZEOF_entry_stack), %ecx + + /* Number of bytes on the entry stack to %ecx */ + sub %esi, %ecx + + /* Mark stackframe as coming from entry stack */ + orl $CS_FROM_ENTRY_STACK, PT_CS(%esp) + + /* + * Test the cr3 used to enter the kernel and add a marker + * so that we can switch back to it before iret. + */ + testl $PTI_SWITCH_MASK, %eax + jz .Lcopy_pt_regs_\@ + orl $CS_FROM_USER_CR3, PT_CS(%esp) + + /* + * %esi and %edi are unchanged, %ecx contains the number of + * bytes to copy. The code at .Lcopy_pt_regs_\@ will allocate + * the stack-frame on task-stack and copy everything over + */ + jmp .Lcopy_pt_regs_\@ + +.Lend_\@: +.endm + +/* + * Switch back from the kernel stack to the entry stack. + * + * The %esp register must point to pt_regs on the task stack. It will + * first calculate the size of the stack-frame to copy, depending on + * whether we return to VM86 mode or not. With that it uses 'rep movsl' + * to copy the contents of the stack over to the entry stack. + * + * We must be very careful here, as we can't trust the contents of the + * task-stack once we switched to the entry-stack. When an NMI happens + * while on the entry-stack, the NMI handler will switch back to the top + * of the task stack, overwriting our stack-frame we are about to copy. + * Therefore we switch the stack only after everything is copied over. + */ +.macro SWITCH_TO_ENTRY_STACK + + ALTERNATIVE "", "jmp .Lend_\@", X86_FEATURE_XENPV + + /* Bytes to copy */ + movl $PTREGS_SIZE, %ecx + +#ifdef CONFIG_VM86 + testl $(X86_EFLAGS_VM), PT_EFLAGS(%esp) + jz .Lcopy_pt_regs_\@ + + /* Additional 4 registers to copy when returning to VM86 mode */ + addl $(4 * 4), %ecx + +.Lcopy_pt_regs_\@: +#endif + + /* Initialize source and destination for movsl */ + movl PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %edi + subl %ecx, %edi + movl %esp, %esi + + /* Save future stack pointer in %ebx */ + movl %edi, %ebx + + /* Copy over the stack-frame */ + shrl $2, %ecx + cld + rep movsl + + /* + * Switch to entry-stack - needs to happen after everything is + * copied because the NMI handler will overwrite the task-stack + * when on entry-stack + */ + movl %ebx, %esp + +.Lend_\@: +.endm + +/* + * This macro handles the case when we return to kernel-mode on the iret + * path and have to switch back to the entry stack and/or user-cr3 + * + * See the comments below the .Lentry_from_kernel_\@ label in the + * SWITCH_TO_KERNEL_STACK macro for more details. + */ +.macro PARANOID_EXIT_TO_KERNEL_MODE + + /* + * Test if we entered the kernel with the entry-stack. Most + * likely we did not, because this code only runs on the + * return-to-kernel path. + */ + testl $CS_FROM_ENTRY_STACK, PT_CS(%esp) + jz .Lend_\@ + + /* Unlikely slow-path */ + + /* Clear marker from stack-frame */ + andl $(~CS_FROM_ENTRY_STACK), PT_CS(%esp) + + /* Copy the remaining task-stack contents to entry-stack */ + movl %esp, %esi + movl PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %edi + + /* Bytes on the task-stack to ecx */ + movl PER_CPU_VAR(cpu_tss_rw + TSS_sp1), %ecx + subl %esi, %ecx + + /* Allocate stack-frame on entry-stack */ + subl %ecx, %edi + + /* + * Save future stack-pointer, we must not switch until the + * copy is done, otherwise the NMI handler could destroy the + * contents of the task-stack we are about to copy. + */ + movl %edi, %ebx + + /* Do the copy */ + shrl $2, %ecx + cld + rep movsl + + /* Safe to switch to entry-stack now */ + movl %ebx, %esp + + /* + * We came from entry-stack and need to check if we also need to + * switch back to user cr3. + */ + testl $CS_FROM_USER_CR3, PT_CS(%esp) + jz .Lend_\@ + + /* Clear marker from stack-frame */ + andl $(~CS_FROM_USER_CR3), PT_CS(%esp) + + SWITCH_TO_USER_CR3 scratch_reg=%eax + +.Lend_\@: +.endm +/* + * %eax: prev task + * %edx: next task + */ +ENTRY(__switch_to_asm) + /* + * Save callee-saved registers + * This must match the order in struct inactive_task_frame + */ + pushl %ebp + pushl %ebx + pushl %edi + pushl %esi + pushfl + + /* switch stack */ + movl %esp, TASK_threadsp(%eax) + movl TASK_threadsp(%edx), %esp + +#ifdef CONFIG_STACKPROTECTOR + movl TASK_stack_canary(%edx), %ebx + movl %ebx, PER_CPU_VAR(stack_canary)+stack_canary_offset +#endif + +#ifdef CONFIG_RETPOLINE + /* + * When switching from a shallower to a deeper call stack + * the RSB may either underflow or use entries populated + * with userspace addresses. On CPUs where those concerns + * exist, overwrite the RSB with entries which capture + * speculative execution to prevent attack. + */ + FILL_RETURN_BUFFER %ebx, RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW +#endif + + /* restore callee-saved registers */ + popfl + popl %esi + popl %edi + popl %ebx + popl %ebp + + jmp __switch_to +END(__switch_to_asm) + +/* + * The unwinder expects the last frame on the stack to always be at the same + * offset from the end of the page, which allows it to validate the stack. + * Calling schedule_tail() directly would break that convention because its an + * asmlinkage function so its argument has to be pushed on the stack. This + * wrapper creates a proper "end of stack" frame header before the call. + */ +ENTRY(schedule_tail_wrapper) + FRAME_BEGIN + + pushl %eax + call schedule_tail + popl %eax + + FRAME_END + ret +ENDPROC(schedule_tail_wrapper) +/* + * A newly forked process directly context switches into this address. + * + * eax: prev task we switched from + * ebx: kernel thread func (NULL for user thread) + * edi: kernel thread arg + */ +ENTRY(ret_from_fork) + call schedule_tail_wrapper + + testl %ebx, %ebx + jnz 1f /* kernel threads are uncommon */ + +2: + /* When we fork, we trace the syscall return in the child, too. */ + movl %esp, %eax + call syscall_return_slowpath + jmp restore_all + + /* kernel thread */ +1: movl %edi, %eax + CALL_NOSPEC %ebx + /* + * A kernel thread is allowed to return here after successfully + * calling do_execve(). Exit to userspace to complete the execve() + * syscall. + */ + movl $0, PT_EAX(%esp) + jmp 2b +END(ret_from_fork) + +/* + * Return to user mode is not as complex as all this looks, + * but we want the default path for a system call return to + * go as quickly as possible which is why some of this is + * less clear than it otherwise should be. + */ + + # userspace resumption stub bypassing syscall exit tracing + ALIGN +ret_from_exception: + preempt_stop(CLBR_ANY) +ret_from_intr: +#ifdef CONFIG_VM86 + movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS + movb PT_CS(%esp), %al + andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax +#else + /* + * We can be coming here from child spawned by kernel_thread(). + */ + movl PT_CS(%esp), %eax + andl $SEGMENT_RPL_MASK, %eax +#endif + cmpl $USER_RPL, %eax + jb resume_kernel # not returning to v8086 or userspace + +ENTRY(resume_userspace) + DISABLE_INTERRUPTS(CLBR_ANY) + TRACE_IRQS_OFF + movl %esp, %eax + call prepare_exit_to_usermode + jmp restore_all +END(ret_from_exception) + +#ifdef CONFIG_PREEMPT +ENTRY(resume_kernel) + DISABLE_INTERRUPTS(CLBR_ANY) +.Lneed_resched: + cmpl $0, PER_CPU_VAR(__preempt_count) + jnz restore_all_kernel + testl $X86_EFLAGS_IF, PT_EFLAGS(%esp) # interrupts off (exception path) ? + jz restore_all_kernel + call preempt_schedule_irq + jmp .Lneed_resched +END(resume_kernel) +#endif + +GLOBAL(__begin_SYSENTER_singlestep_region) +/* + * All code from here through __end_SYSENTER_singlestep_region is subject + * to being single-stepped if a user program sets TF and executes SYSENTER. + * There is absolutely nothing that we can do to prevent this from happening + * (thanks Intel!). To keep our handling of this situation as simple as + * possible, we handle TF just like AC and NT, except that our #DB handler + * will ignore all of the single-step traps generated in this range. + */ + +#ifdef CONFIG_XEN +/* + * Xen doesn't set %esp to be precisely what the normal SYSENTER + * entry point expects, so fix it up before using the normal path. + */ +ENTRY(xen_sysenter_target) + addl $5*4, %esp /* remove xen-provided frame */ + jmp .Lsysenter_past_esp +#endif + +/* + * 32-bit SYSENTER entry. + * + * 32-bit system calls through the vDSO's __kernel_vsyscall enter here + * if X86_FEATURE_SEP is available. This is the preferred system call + * entry on 32-bit systems. + * + * The SYSENTER instruction, in principle, should *only* occur in the + * vDSO. In practice, a small number of Android devices were shipped + * with a copy of Bionic that inlined a SYSENTER instruction. This + * never happened in any of Google's Bionic versions -- it only happened + * in a narrow range of Intel-provided versions. + * + * SYSENTER loads SS, ESP, CS, and EIP from previously programmed MSRs. + * IF and VM in RFLAGS are cleared (IOW: interrupts are off). + * SYSENTER does not save anything on the stack, + * and does not save old EIP (!!!), ESP, or EFLAGS. + * + * To avoid losing track of EFLAGS.VM (and thus potentially corrupting + * user and/or vm86 state), we explicitly disable the SYSENTER + * instruction in vm86 mode by reprogramming the MSRs. + * + * Arguments: + * eax system call number + * ebx arg1 + * ecx arg2 + * edx arg3 + * esi arg4 + * edi arg5 + * ebp user stack + * 0(%ebp) arg6 + */ +ENTRY(entry_SYSENTER_32) + /* + * On entry-stack with all userspace-regs live - save and + * restore eflags and %eax to use it as scratch-reg for the cr3 + * switch. + */ + pushfl + pushl %eax + BUG_IF_WRONG_CR3 no_user_check=1 + SWITCH_TO_KERNEL_CR3 scratch_reg=%eax + popl %eax + popfl + + /* Stack empty again, switch to task stack */ + movl TSS_entry2task_stack(%esp), %esp + +.Lsysenter_past_esp: + pushl $__USER_DS /* pt_regs->ss */ + pushl %ebp /* pt_regs->sp (stashed in bp) */ + pushfl /* pt_regs->flags (except IF = 0) */ + orl $X86_EFLAGS_IF, (%esp) /* Fix IF */ + pushl $__USER_CS /* pt_regs->cs */ + pushl $0 /* pt_regs->ip = 0 (placeholder) */ + pushl %eax /* pt_regs->orig_ax */ + SAVE_ALL pt_regs_ax=$-ENOSYS /* save rest, stack already switched */ + + /* + * SYSENTER doesn't filter flags, so we need to clear NT, AC + * and TF ourselves. To save a few cycles, we can check whether + * either was set instead of doing an unconditional popfq. + * This needs to happen before enabling interrupts so that + * we don't get preempted with NT set. + * + * If TF is set, we will single-step all the way to here -- do_debug + * will ignore all the traps. (Yes, this is slow, but so is + * single-stepping in general. This allows us to avoid having + * a more complicated code to handle the case where a user program + * forces us to single-step through the SYSENTER entry code.) + * + * NB.: .Lsysenter_fix_flags is a label with the code under it moved + * out-of-line as an optimization: NT is unlikely to be set in the + * majority of the cases and instead of polluting the I$ unnecessarily, + * we're keeping that code behind a branch which will predict as + * not-taken and therefore its instructions won't be fetched. + */ + testl $X86_EFLAGS_NT|X86_EFLAGS_AC|X86_EFLAGS_TF, PT_EFLAGS(%esp) + jnz .Lsysenter_fix_flags +.Lsysenter_flags_fixed: + + /* + * User mode is traced as though IRQs are on, and SYSENTER + * turned them off. + */ + TRACE_IRQS_OFF + + movl %esp, %eax + call do_fast_syscall_32 + /* XEN PV guests always use IRET path */ + ALTERNATIVE "testl %eax, %eax; jz .Lsyscall_32_done", \ + "jmp .Lsyscall_32_done", X86_FEATURE_XENPV + +/* Opportunistic SYSEXIT */ + TRACE_IRQS_ON /* User mode traces as IRQs on. */ + + /* + * Setup entry stack - we keep the pointer in %eax and do the + * switch after almost all user-state is restored. + */ + + /* Load entry stack pointer and allocate frame for eflags/eax */ + movl PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %eax + subl $(2*4), %eax + + /* Copy eflags and eax to entry stack */ + movl PT_EFLAGS(%esp), %edi + movl PT_EAX(%esp), %esi + movl %edi, (%eax) + movl %esi, 4(%eax) + + /* Restore user registers and segments */ + movl PT_EIP(%esp), %edx /* pt_regs->ip */ + movl PT_OLDESP(%esp), %ecx /* pt_regs->sp */ +1: mov PT_FS(%esp), %fs + PTGS_TO_GS + + popl %ebx /* pt_regs->bx */ + addl $2*4, %esp /* skip pt_regs->cx and pt_regs->dx */ + popl %esi /* pt_regs->si */ + popl %edi /* pt_regs->di */ + popl %ebp /* pt_regs->bp */ + + /* Switch to entry stack */ + movl %eax, %esp + + /* Now ready to switch the cr3 */ + SWITCH_TO_USER_CR3 scratch_reg=%eax + + /* + * Restore all flags except IF. (We restore IF separately because + * STI gives a one-instruction window in which we won't be interrupted, + * whereas POPF does not.) + */ + btrl $X86_EFLAGS_IF_BIT, (%esp) + BUG_IF_WRONG_CR3 no_user_check=1 + popfl + popl %eax + + /* + * Return back to the vDSO, which will pop ecx and edx. + * Don't bother with DS and ES (they already contain __USER_DS). + */ + sti + sysexit + +.pushsection .fixup, "ax" +2: movl $0, PT_FS(%esp) + jmp 1b +.popsection + _ASM_EXTABLE(1b, 2b) + PTGS_TO_GS_EX + +.Lsysenter_fix_flags: + pushl $X86_EFLAGS_FIXED + popfl + jmp .Lsysenter_flags_fixed +GLOBAL(__end_SYSENTER_singlestep_region) +ENDPROC(entry_SYSENTER_32) + +/* + * 32-bit legacy system call entry. + * + * 32-bit x86 Linux system calls traditionally used the INT $0x80 + * instruction. INT $0x80 lands here. + * + * This entry point can be used by any 32-bit perform system calls. + * Instances of INT $0x80 can be found inline in various programs and + * libraries. It is also used by the vDSO's __kernel_vsyscall + * fallback for hardware that doesn't support a faster entry method. + * Restarted 32-bit system calls also fall back to INT $0x80 + * regardless of what instruction was originally used to do the system + * call. (64-bit programs can use INT $0x80 as well, but they can + * only run on 64-bit kernels and therefore land in + * entry_INT80_compat.) + * + * This is considered a slow path. It is not used by most libc + * implementations on modern hardware except during process startup. + * + * Arguments: + * eax system call number + * ebx arg1 + * ecx arg2 + * edx arg3 + * esi arg4 + * edi arg5 + * ebp arg6 + */ +ENTRY(entry_INT80_32) + ASM_CLAC + pushl %eax /* pt_regs->orig_ax */ + + SAVE_ALL pt_regs_ax=$-ENOSYS switch_stacks=1 /* save rest */ + + /* + * User mode is traced as though IRQs are on, and the interrupt gate + * turned them off. + */ + TRACE_IRQS_OFF + + movl %esp, %eax + call do_int80_syscall_32 +.Lsyscall_32_done: + +restore_all: + TRACE_IRQS_IRET + SWITCH_TO_ENTRY_STACK +.Lrestore_all_notrace: + CHECK_AND_APPLY_ESPFIX +.Lrestore_nocheck: + /* Switch back to user CR3 */ + SWITCH_TO_USER_CR3 scratch_reg=%eax + + BUG_IF_WRONG_CR3 + + /* Restore user state */ + RESTORE_REGS pop=4 # skip orig_eax/error_code +.Lirq_return: + /* + * ARCH_HAS_MEMBARRIER_SYNC_CORE rely on IRET core serialization + * when returning from IPI handler and when returning from + * scheduler to user-space. + */ + INTERRUPT_RETURN + +restore_all_kernel: + TRACE_IRQS_IRET + PARANOID_EXIT_TO_KERNEL_MODE + BUG_IF_WRONG_CR3 + RESTORE_REGS 4 + jmp .Lirq_return + +.section .fixup, "ax" +ENTRY(iret_exc ) + pushl $0 # no error code + pushl $do_iret_error + +#ifdef CONFIG_DEBUG_ENTRY + /* + * The stack-frame here is the one that iret faulted on, so its a + * return-to-user frame. We are on kernel-cr3 because we come here from + * the fixup code. This confuses the CR3 checker, so switch to user-cr3 + * as the checker expects it. + */ + pushl %eax + SWITCH_TO_USER_CR3 scratch_reg=%eax + popl %eax +#endif + + jmp common_exception +.previous + _ASM_EXTABLE(.Lirq_return, iret_exc) +ENDPROC(entry_INT80_32) + +.macro FIXUP_ESPFIX_STACK +/* + * Switch back for ESPFIX stack to the normal zerobased stack + * + * We can't call C functions using the ESPFIX stack. This code reads + * the high word of the segment base from the GDT and swiches to the + * normal stack and adjusts ESP with the matching offset. + */ +#ifdef CONFIG_X86_ESPFIX32 + /* fixup the stack */ + mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */ + mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */ + shl $16, %eax + addl %esp, %eax /* the adjusted stack pointer */ + pushl $__KERNEL_DS + pushl %eax + lss (%esp), %esp /* switch to the normal stack segment */ +#endif +.endm +.macro UNWIND_ESPFIX_STACK +#ifdef CONFIG_X86_ESPFIX32 + movl %ss, %eax + /* see if on espfix stack */ + cmpw $__ESPFIX_SS, %ax + jne 27f + movl $__KERNEL_DS, %eax + movl %eax, %ds + movl %eax, %es + /* switch to normal stack */ + FIXUP_ESPFIX_STACK +27: +#endif +.endm + +/* + * Build the entry stubs with some assembler magic. + * We pack 1 stub into every 8-byte block. + */ + .align 8 +ENTRY(irq_entries_start) + vector=FIRST_EXTERNAL_VECTOR + .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR) + pushl $(~vector+0x80) /* Note: always in signed byte range */ + vector=vector+1 + jmp common_interrupt + .align 8 + .endr +END(irq_entries_start) + +#ifdef CONFIG_X86_LOCAL_APIC + .align 8 +ENTRY(spurious_entries_start) + vector=FIRST_SYSTEM_VECTOR + .rept (NR_VECTORS - FIRST_SYSTEM_VECTOR) + pushl $(~vector+0x80) /* Note: always in signed byte range */ + vector=vector+1 + jmp common_spurious + .align 8 + .endr +END(spurious_entries_start) + +common_spurious: + ASM_CLAC + addl $-0x80, (%esp) /* Adjust vector into the [-256, -1] range */ + SAVE_ALL switch_stacks=1 + ENCODE_FRAME_POINTER + TRACE_IRQS_OFF + movl %esp, %eax + call smp_spurious_interrupt + jmp ret_from_intr +ENDPROC(common_spurious) +#endif + +/* + * the CPU automatically disables interrupts when executing an IRQ vector, + * so IRQ-flags tracing has to follow that: + */ + .p2align CONFIG_X86_L1_CACHE_SHIFT +common_interrupt: + ASM_CLAC + addl $-0x80, (%esp) /* Adjust vector into the [-256, -1] range */ + + SAVE_ALL switch_stacks=1 + ENCODE_FRAME_POINTER + TRACE_IRQS_OFF + movl %esp, %eax + call do_IRQ + jmp ret_from_intr +ENDPROC(common_interrupt) + +#define BUILD_INTERRUPT3(name, nr, fn) \ +ENTRY(name) \ + ASM_CLAC; \ + pushl $~(nr); \ + SAVE_ALL switch_stacks=1; \ + ENCODE_FRAME_POINTER; \ + TRACE_IRQS_OFF \ + movl %esp, %eax; \ + call fn; \ + jmp ret_from_intr; \ +ENDPROC(name) + +#define BUILD_INTERRUPT(name, nr) \ + BUILD_INTERRUPT3(name, nr, smp_##name); \ + +/* The include is where all of the SMP etc. interrupts come from */ +#include <asm/entry_arch.h> + +ENTRY(coprocessor_error) + ASM_CLAC + pushl $0 + pushl $do_coprocessor_error + jmp common_exception +END(coprocessor_error) + +ENTRY(simd_coprocessor_error) + ASM_CLAC + pushl $0 +#ifdef CONFIG_X86_INVD_BUG + /* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */ + ALTERNATIVE "pushl $do_general_protection", \ + "pushl $do_simd_coprocessor_error", \ + X86_FEATURE_XMM +#else + pushl $do_simd_coprocessor_error +#endif + jmp common_exception +END(simd_coprocessor_error) + +ENTRY(device_not_available) + ASM_CLAC + pushl $-1 # mark this as an int + pushl $do_device_not_available + jmp common_exception +END(device_not_available) + +#ifdef CONFIG_PARAVIRT +ENTRY(native_iret) + iret + _ASM_EXTABLE(native_iret, iret_exc) +END(native_iret) +#endif + +ENTRY(overflow) + ASM_CLAC + pushl $0 + pushl $do_overflow + jmp common_exception +END(overflow) + +ENTRY(bounds) + ASM_CLAC + pushl $0 + pushl $do_bounds + jmp common_exception +END(bounds) + +ENTRY(invalid_op) + ASM_CLAC + pushl $0 + pushl $do_invalid_op + jmp common_exception +END(invalid_op) + +ENTRY(coprocessor_segment_overrun) + ASM_CLAC + pushl $0 + pushl $do_coprocessor_segment_overrun + jmp common_exception +END(coprocessor_segment_overrun) + +ENTRY(invalid_TSS) + ASM_CLAC + pushl $do_invalid_TSS + jmp common_exception +END(invalid_TSS) + +ENTRY(segment_not_present) + ASM_CLAC + pushl $do_segment_not_present + jmp common_exception +END(segment_not_present) + +ENTRY(stack_segment) + ASM_CLAC + pushl $do_stack_segment + jmp common_exception +END(stack_segment) + +ENTRY(alignment_check) + ASM_CLAC + pushl $do_alignment_check + jmp common_exception +END(alignment_check) + +ENTRY(divide_error) + ASM_CLAC + pushl $0 # no error code + pushl $do_divide_error + jmp common_exception +END(divide_error) + +#ifdef CONFIG_X86_MCE +ENTRY(machine_check) + ASM_CLAC + pushl $0 + pushl machine_check_vector + jmp common_exception +END(machine_check) +#endif + +ENTRY(spurious_interrupt_bug) + ASM_CLAC + pushl $0 + pushl $do_spurious_interrupt_bug + jmp common_exception +END(spurious_interrupt_bug) + +#ifdef CONFIG_XEN +ENTRY(xen_hypervisor_callback) + pushl $-1 /* orig_ax = -1 => not a system call */ + SAVE_ALL + ENCODE_FRAME_POINTER + TRACE_IRQS_OFF + + /* + * Check to see if we got the event in the critical + * region in xen_iret_direct, after we've reenabled + * events and checked for pending events. This simulates + * iret instruction's behaviour where it delivers a + * pending interrupt when enabling interrupts: + */ + movl PT_EIP(%esp), %eax + cmpl $xen_iret_start_crit, %eax + jb 1f + cmpl $xen_iret_end_crit, %eax + jae 1f + + jmp xen_iret_crit_fixup + +ENTRY(xen_do_upcall) +1: mov %esp, %eax + call xen_evtchn_do_upcall +#ifndef CONFIG_PREEMPT + call xen_maybe_preempt_hcall +#endif + jmp ret_from_intr +ENDPROC(xen_hypervisor_callback) + +/* + * Hypervisor uses this for application faults while it executes. + * We get here for two reasons: + * 1. Fault while reloading DS, ES, FS or GS + * 2. Fault while executing IRET + * Category 1 we fix up by reattempting the load, and zeroing the segment + * register if the load fails. + * Category 2 we fix up by jumping to do_iret_error. We cannot use the + * normal Linux return path in this case because if we use the IRET hypercall + * to pop the stack frame we end up in an infinite loop of failsafe callbacks. + * We distinguish between categories by maintaining a status value in EAX. + */ +ENTRY(xen_failsafe_callback) + pushl %eax + movl $1, %eax +1: mov 4(%esp), %ds +2: mov 8(%esp), %es +3: mov 12(%esp), %fs +4: mov 16(%esp), %gs + /* EAX == 0 => Category 1 (Bad segment) + EAX != 0 => Category 2 (Bad IRET) */ + testl %eax, %eax + popl %eax + lea 16(%esp), %esp + jz 5f + jmp iret_exc +5: pushl $-1 /* orig_ax = -1 => not a system call */ + SAVE_ALL + ENCODE_FRAME_POINTER + jmp ret_from_exception + +.section .fixup, "ax" +6: xorl %eax, %eax + movl %eax, 4(%esp) + jmp 1b +7: xorl %eax, %eax + movl %eax, 8(%esp) + jmp 2b +8: xorl %eax, %eax + movl %eax, 12(%esp) + jmp 3b +9: xorl %eax, %eax + movl %eax, 16(%esp) + jmp 4b +.previous + _ASM_EXTABLE(1b, 6b) + _ASM_EXTABLE(2b, 7b) + _ASM_EXTABLE(3b, 8b) + _ASM_EXTABLE(4b, 9b) +ENDPROC(xen_failsafe_callback) + +BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR, + xen_evtchn_do_upcall) + +#endif /* CONFIG_XEN */ + +#if IS_ENABLED(CONFIG_HYPERV) + +BUILD_INTERRUPT3(hyperv_callback_vector, HYPERVISOR_CALLBACK_VECTOR, + hyperv_vector_handler) + +BUILD_INTERRUPT3(hyperv_reenlightenment_vector, HYPERV_REENLIGHTENMENT_VECTOR, + hyperv_reenlightenment_intr) + +BUILD_INTERRUPT3(hv_stimer0_callback_vector, HYPERV_STIMER0_VECTOR, + hv_stimer0_vector_handler) + +#endif /* CONFIG_HYPERV */ + +ENTRY(page_fault) + ASM_CLAC + pushl $do_page_fault + ALIGN + jmp common_exception +END(page_fault) + +common_exception: + /* the function address is in %gs's slot on the stack */ + pushl %fs + pushl %es + pushl %ds + pushl %eax + movl $(__USER_DS), %eax + movl %eax, %ds + movl %eax, %es + movl $(__KERNEL_PERCPU), %eax + movl %eax, %fs + pushl %ebp + pushl %edi + pushl %esi + pushl %edx + pushl %ecx + pushl %ebx + SWITCH_TO_KERNEL_STACK + ENCODE_FRAME_POINTER + cld + UNWIND_ESPFIX_STACK + GS_TO_REG %ecx + movl PT_GS(%esp), %edi # get the function address + movl PT_ORIG_EAX(%esp), %edx # get the error code + movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart + REG_TO_PTGS %ecx + SET_KERNEL_GS %ecx + TRACE_IRQS_OFF + movl %esp, %eax # pt_regs pointer + CALL_NOSPEC %edi + jmp ret_from_exception +END(common_exception) + +ENTRY(debug) + /* + * Entry from sysenter is now handled in common_exception + */ + ASM_CLAC + pushl $-1 # mark this as an int + pushl $do_debug + jmp common_exception +END(debug) + +/* + * NMI is doubly nasty. It can happen on the first instruction of + * entry_SYSENTER_32 (just like #DB), but it can also interrupt the beginning + * of the #DB handler even if that #DB in turn hit before entry_SYSENTER_32 + * switched stacks. We handle both conditions by simply checking whether we + * interrupted kernel code running on the SYSENTER stack. + */ +ENTRY(nmi) + ASM_CLAC + +#ifdef CONFIG_X86_ESPFIX32 + pushl %eax + movl %ss, %eax + cmpw $__ESPFIX_SS, %ax + popl %eax + je .Lnmi_espfix_stack +#endif + + pushl %eax # pt_regs->orig_ax + SAVE_ALL_NMI cr3_reg=%edi + ENCODE_FRAME_POINTER + xorl %edx, %edx # zero error code + movl %esp, %eax # pt_regs pointer + + /* Are we currently on the SYSENTER stack? */ + movl PER_CPU_VAR(cpu_entry_area), %ecx + addl $CPU_ENTRY_AREA_entry_stack + SIZEOF_entry_stack, %ecx + subl %eax, %ecx /* ecx = (end of entry_stack) - esp */ + cmpl $SIZEOF_entry_stack, %ecx + jb .Lnmi_from_sysenter_stack + + /* Not on SYSENTER stack. */ + call do_nmi + jmp .Lnmi_return + +.Lnmi_from_sysenter_stack: + /* + * We're on the SYSENTER stack. Switch off. No one (not even debug) + * is using the thread stack right now, so it's safe for us to use it. + */ + movl %esp, %ebx + movl PER_CPU_VAR(cpu_current_top_of_stack), %esp + call do_nmi + movl %ebx, %esp + +.Lnmi_return: + CHECK_AND_APPLY_ESPFIX + RESTORE_ALL_NMI cr3_reg=%edi pop=4 + jmp .Lirq_return + +#ifdef CONFIG_X86_ESPFIX32 +.Lnmi_espfix_stack: + /* + * create the pointer to lss back + */ + pushl %ss + pushl %esp + addl $4, (%esp) + /* copy the iret frame of 12 bytes */ + .rept 3 + pushl 16(%esp) + .endr + pushl %eax + SAVE_ALL_NMI cr3_reg=%edi + ENCODE_FRAME_POINTER + FIXUP_ESPFIX_STACK # %eax == %esp + xorl %edx, %edx # zero error code + call do_nmi + RESTORE_ALL_NMI cr3_reg=%edi + lss 12+4(%esp), %esp # back to espfix stack + jmp .Lirq_return +#endif +END(nmi) + +ENTRY(int3) + ASM_CLAC + pushl $-1 # mark this as an int + + SAVE_ALL switch_stacks=1 + ENCODE_FRAME_POINTER + TRACE_IRQS_OFF + xorl %edx, %edx # zero error code + movl %esp, %eax # pt_regs pointer + call do_int3 + jmp ret_from_exception +END(int3) + +ENTRY(general_protection) + ASM_CLAC + pushl $do_general_protection + jmp common_exception +END(general_protection) + +#ifdef CONFIG_KVM_GUEST +ENTRY(async_page_fault) + ASM_CLAC + pushl $do_async_page_fault + jmp common_exception +END(async_page_fault) +#endif + +ENTRY(rewind_stack_do_exit) + /* Prevent any naive code from trying to unwind to our caller. */ + xorl %ebp, %ebp + + movl PER_CPU_VAR(cpu_current_top_of_stack), %esi + leal -TOP_OF_KERNEL_STACK_PADDING-PTREGS_SIZE(%esi), %esp + + call do_exit +1: jmp 1b +END(rewind_stack_do_exit) |