diff options
Diffstat (limited to 'drivers/ata/acard-ahci.c')
| -rw-r--r-- | drivers/ata/acard-ahci.c | 514 |
1 files changed, 514 insertions, 0 deletions
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c new file mode 100644 index 000000000..505f8c316 --- /dev/null +++ b/drivers/ata/acard-ahci.c @@ -0,0 +1,514 @@ + +/* + * acard-ahci.c - ACard AHCI SATA support + * + * Maintained by: Tejun Heo <tj@kernel.org> + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2010 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/driver-api/libata.rst + * + * AHCI hardware documentation: + * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf + * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/device.h> +#include <linux/dmi.h> +#include <linux/gfp.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_cmnd.h> +#include <linux/libata.h> +#include "ahci.h" + +#define DRV_NAME "acard-ahci" +#define DRV_VERSION "1.0" + +/* + Received FIS structure limited to 80h. +*/ + +#define ACARD_AHCI_RX_FIS_SZ 128 + +enum { + AHCI_PCI_BAR = 5, +}; + +enum board_ids { + board_acard_ahci, +}; + +struct acard_sg { + __le32 addr; + __le32 addr_hi; + __le32 reserved; + __le32 size; /* bit 31 (EOT) max==0x10000 (64k) */ +}; + +static enum ata_completion_errors acard_ahci_qc_prep(struct ata_queued_cmd *qc); +static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc); +static int acard_ahci_port_start(struct ata_port *ap); +static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); + +#ifdef CONFIG_PM_SLEEP +static int acard_ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); +static int acard_ahci_pci_device_resume(struct pci_dev *pdev); +#endif + +static struct scsi_host_template acard_ahci_sht = { + AHCI_SHT("acard-ahci"), +}; + +static struct ata_port_operations acard_ops = { + .inherits = &ahci_ops, + .qc_prep = acard_ahci_qc_prep, + .qc_fill_rtf = acard_ahci_qc_fill_rtf, + .port_start = acard_ahci_port_start, +}; + +#define AHCI_HFLAGS(flags) .private_data = (void *)(flags) + +static const struct ata_port_info acard_ahci_port_info[] = { + [board_acard_ahci] = + { + AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &acard_ops, + }, +}; + +static const struct pci_device_id acard_ahci_pci_tbl[] = { + /* ACard */ + { PCI_VDEVICE(ARTOP, 0x000d), board_acard_ahci }, /* ATP8620 */ + + { } /* terminate list */ +}; + +static struct pci_driver acard_ahci_pci_driver = { + .name = DRV_NAME, + .id_table = acard_ahci_pci_tbl, + .probe = acard_ahci_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = acard_ahci_pci_device_suspend, + .resume = acard_ahci_pci_device_resume, +#endif +}; + +#ifdef CONFIG_PM_SLEEP +static int acard_ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host *host = pci_get_drvdata(pdev); + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + u32 ctl; + + if (mesg.event & PM_EVENT_SUSPEND && + hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { + dev_err(&pdev->dev, + "BIOS update required for suspend/resume\n"); + return -EIO; + } + + if (mesg.event & PM_EVENT_SLEEP) { + /* AHCI spec rev1.1 section 8.3.3: + * Software must disable interrupts prior to requesting a + * transition of the HBA to D3 state. + */ + ctl = readl(mmio + HOST_CTL); + ctl &= ~HOST_IRQ_EN; + writel(ctl, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + } + + return ata_pci_device_suspend(pdev, mesg); +} + +static int acard_ahci_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { + rc = ahci_reset_controller(host); + if (rc) + return rc; + + ahci_init_controller(host); + } + + ata_host_resume(host); + + return 0; +} +#endif + +static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac) +{ + int rc; + + if (using_dac && + !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + if (rc) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, + "64-bit DMA enable failed\n"); + return rc; + } + } + } else { + rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, "32-bit DMA enable failed\n"); + return rc; + } + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, + "32-bit consistent DMA enable failed\n"); + return rc; + } + } + return 0; +} + +static void acard_ahci_pci_print_info(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + u16 cc; + const char *scc_s; + + pci_read_config_word(pdev, 0x0a, &cc); + if (cc == PCI_CLASS_STORAGE_IDE) + scc_s = "IDE"; + else if (cc == PCI_CLASS_STORAGE_SATA) + scc_s = "SATA"; + else if (cc == PCI_CLASS_STORAGE_RAID) + scc_s = "RAID"; + else + scc_s = "unknown"; + + ahci_print_info(host, scc_s); +} + +static unsigned int acard_ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) +{ + struct scatterlist *sg; + struct acard_sg *acard_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; + unsigned int si, last_si = 0; + + VPRINTK("ENTER\n"); + + /* + * Next, the S/G list. + */ + for_each_sg(qc->sg, sg, qc->n_elem, si) { + dma_addr_t addr = sg_dma_address(sg); + u32 sg_len = sg_dma_len(sg); + + /* + * ACard note: + * We must set an end-of-table (EOT) bit, + * and the segment cannot exceed 64k (0x10000) + */ + acard_sg[si].addr = cpu_to_le32(addr & 0xffffffff); + acard_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16); + acard_sg[si].size = cpu_to_le32(sg_len); + last_si = si; + } + + acard_sg[last_si].size |= cpu_to_le32(1 << 31); /* set EOT */ + + return si; +} + +static enum ata_completion_errors acard_ahci_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ahci_port_priv *pp = ap->private_data; + int is_atapi = ata_is_atapi(qc->tf.protocol); + void *cmd_tbl; + u32 opts; + const u32 cmd_fis_len = 5; /* five dwords */ + unsigned int n_elem; + + /* + * Fill in command table information. First, the header, + * a SATA Register - Host to Device command FIS. + */ + cmd_tbl = pp->cmd_tbl + qc->hw_tag * AHCI_CMD_TBL_SZ; + + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl); + if (is_atapi) { + memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); + memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); + } + + n_elem = 0; + if (qc->flags & ATA_QCFLAG_DMAMAP) + n_elem = acard_ahci_fill_sg(qc, cmd_tbl); + + /* + * Fill in command slot information. + * + * ACard note: prd table length not filled in + */ + opts = cmd_fis_len | (qc->dev->link->pmp << 12); + if (qc->tf.flags & ATA_TFLAG_WRITE) + opts |= AHCI_CMD_WRITE; + if (is_atapi) + opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; + + ahci_fill_cmd_slot(pp, qc->hw_tag, opts); + + return AC_ERR_OK; +} + +static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc) +{ + struct ahci_port_priv *pp = qc->ap->private_data; + u8 *rx_fis = pp->rx_fis; + + if (pp->fbs_enabled) + rx_fis += qc->dev->link->pmp * ACARD_AHCI_RX_FIS_SZ; + + /* + * After a successful execution of an ATA PIO data-in command, + * the device doesn't send D2H Reg FIS to update the TF and + * the host should take TF and E_Status from the preceding PIO + * Setup FIS. + */ + if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE && + !(qc->flags & ATA_QCFLAG_FAILED)) { + ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf); + qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15]; + } else + ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf); + + return true; +} + +static int acard_ahci_port_start(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct device *dev = ap->host->dev; + struct ahci_port_priv *pp; + void *mem; + dma_addr_t mem_dma; + size_t dma_sz, rx_fis_sz; + + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + + /* check FBS capability */ + if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) { + void __iomem *port_mmio = ahci_port_base(ap); + u32 cmd = readl(port_mmio + PORT_CMD); + if (cmd & PORT_CMD_FBSCP) + pp->fbs_supported = true; + else if (hpriv->flags & AHCI_HFLAG_YES_FBS) { + dev_info(dev, "port %d can do FBS, forcing FBSCP\n", + ap->port_no); + pp->fbs_supported = true; + } else + dev_warn(dev, "port %d is not capable of FBS\n", + ap->port_no); + } + + if (pp->fbs_supported) { + dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ; + rx_fis_sz = ACARD_AHCI_RX_FIS_SZ * 16; + } else { + dma_sz = AHCI_PORT_PRIV_DMA_SZ; + rx_fis_sz = ACARD_AHCI_RX_FIS_SZ; + } + + mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL); + if (!mem) + return -ENOMEM; + memset(mem, 0, dma_sz); + + /* + * First item in chunk of DMA memory: 32-slot command table, + * 32 bytes each in size + */ + pp->cmd_slot = mem; + pp->cmd_slot_dma = mem_dma; + + mem += AHCI_CMD_SLOT_SZ; + mem_dma += AHCI_CMD_SLOT_SZ; + + /* + * Second item: Received-FIS area + */ + pp->rx_fis = mem; + pp->rx_fis_dma = mem_dma; + + mem += rx_fis_sz; + mem_dma += rx_fis_sz; + + /* + * Third item: data area for storing a single command + * and its scatter-gather table + */ + pp->cmd_tbl = mem; + pp->cmd_tbl_dma = mem_dma; + + /* + * Save off initial list of interrupts to be enabled. + * This could be changed later + */ + pp->intr_mask = DEF_PORT_IRQ; + + ap->private_data = pp; + + /* engage engines, captain */ + return ahci_port_resume(ap); +} + +static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + unsigned int board_id = ent->driver_data; + struct ata_port_info pi = acard_ahci_port_info[board_id]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct ata_host *host; + int n_ports, i, rc; + + VPRINTK("ENTER\n"); + + WARN_ON((int)ATA_MAX_QUEUE > AHCI_MAX_CMDS); + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* acquire resources */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* AHCI controllers often implement SFF compatible interface. + * Grab all PCI BARs just in case. + */ + rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + + hpriv->irq = pdev->irq; + hpriv->flags |= (unsigned long)pi.private_data; + + if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) + pci_enable_msi(pdev); + + hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR]; + + /* save initial config */ + ahci_save_initial_config(&pdev->dev, hpriv); + + /* prepare host */ + if (hpriv->cap & HOST_CAP_NCQ) + pi.flags |= ATA_FLAG_NCQ; + + if (hpriv->cap & HOST_CAP_PMP) + pi.flags |= ATA_FLAG_PMP; + + ahci_set_em_messages(hpriv, &pi); + + /* CAP.NP sometimes indicate the index of the last enabled + * port, at other times, that of the last possible port, so + * determining the maximum port number requires looking at + * both CAP.NP and port_map. + */ + n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + if (!host) + return -ENOMEM; + host->private_data = hpriv; + + if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) + host->flags |= ATA_HOST_PARALLEL_SCAN; + else + printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar"); + ata_port_pbar_desc(ap, AHCI_PCI_BAR, + 0x100 + ap->port_no * 0x80, "port"); + + /* set initial link pm policy */ + /* + ap->pm_policy = NOT_AVAILABLE; + */ + /* disabled/not-implemented port */ + if (!(hpriv->port_map & (1 << i))) + ap->ops = &ata_dummy_port_ops; + } + + /* initialize adapter */ + rc = acard_ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64); + if (rc) + return rc; + + rc = ahci_reset_controller(host); + if (rc) + return rc; + + ahci_init_controller(host); + acard_ahci_pci_print_info(host); + + pci_set_master(pdev); + return ahci_host_activate(host, &acard_ahci_sht); +} + +module_pci_driver(acard_ahci_pci_driver); + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("ACard AHCI SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, acard_ahci_pci_tbl); +MODULE_VERSION(DRV_VERSION); |