diff options
Diffstat (limited to 'drivers/ata/pata_sil680.c')
| -rw-r--r-- | drivers/ata/pata_sil680.c | 444 |
1 files changed, 444 insertions, 0 deletions
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c new file mode 100644 index 000000000..c14071be4 --- /dev/null +++ b/drivers/ata/pata_sil680.c @@ -0,0 +1,444 @@ +/* + * pata_sil680.c - SIL680 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * + * based upon + * + * linux/drivers/ide/pci/siimage.c Version 1.07 Nov 30, 2003 + * + * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2003 Red Hat <alan@redhat.com> + * + * May be copied or modified under the terms of the GNU General Public License + * + * Documentation publicly available. + * + * If you have strange problems with nVidia chipset systems please + * see the SI support documentation and update your system BIOS + * if necessary + * + * TODO + * If we know all our devices are LBA28 (or LBA28 sized) we could use + * the command fifo mode. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_sil680" +#define DRV_VERSION "0.4.9" + +#define SIL680_MMIO_BAR 5 + +/** + * sil680_selreg - return register base + * @ap: ATA interface + * @r: config offset + * + * Turn a config register offset into the right address in PCI space + * to access the control register in question. + * + * Thankfully this is a configuration operation so isn't performance + * criticial. + */ + +static unsigned long sil680_selreg(struct ata_port *ap, int r) +{ + unsigned long base = 0xA0 + r; + base += (ap->port_no << 4); + return base; +} + +/** + * sil680_seldev - return register base + * @ap: ATA interface + * @r: config offset + * + * Turn a config register offset into the right address in PCI space + * to access the control register in question including accounting for + * the unit shift. + */ + +static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r) +{ + unsigned long base = 0xA0 + r; + base += (ap->port_no << 4); + base |= adev->devno ? 2 : 0; + return base; +} + + +/** + * sil680_cable_detect - cable detection + * @ap: ATA port + * + * Perform cable detection. The SIL680 stores this in PCI config + * space for us. + */ + +static int sil680_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long addr = sil680_selreg(ap, 0); + u8 ata66; + pci_read_config_byte(pdev, addr, &ata66); + if (ata66 & 1) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +/** + * sil680_set_piomode - set PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the SIL680 registers for PIO mode. Note that the task speed + * registers are shared between the devices so we must pick the lowest + * mode for command work. + */ + +static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u16 speed_p[5] = { + 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 + }; + static const u16 speed_t[5] = { + 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 + }; + + unsigned long tfaddr = sil680_selreg(ap, 0x02); + unsigned long addr = sil680_seldev(ap, adev, 0x04); + unsigned long addr_mask = 0x80 + 4 * ap->port_no; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int pio = adev->pio_mode - XFER_PIO_0; + int lowest_pio = pio; + int port_shift = 4 * adev->devno; + u16 reg; + u8 mode; + + struct ata_device *pair = ata_dev_pair(adev); + + if (pair != NULL && adev->pio_mode > pair->pio_mode) + lowest_pio = pair->pio_mode - XFER_PIO_0; + + pci_write_config_word(pdev, addr, speed_p[pio]); + pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]); + + pci_read_config_word(pdev, tfaddr-2, ®); + pci_read_config_byte(pdev, addr_mask, &mode); + + reg &= ~0x0200; /* Clear IORDY */ + mode &= ~(3 << port_shift); /* Clear IORDY and DMA bits */ + + if (ata_pio_need_iordy(adev)) { + reg |= 0x0200; /* Enable IORDY */ + mode |= 1 << port_shift; + } + pci_write_config_word(pdev, tfaddr-2, reg); + pci_write_config_byte(pdev, addr_mask, mode); +} + +/** + * sil680_set_dmamode - set DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the MWDMA/UDMA modes for the sil680 chipset. + * + * The MWDMA mode values are pulled from a lookup table + * while the chipset uses mode number for UDMA. + */ + +static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 ultra_table[2][7] = { + { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF }, /* 100MHz */ + { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }, /* 133Mhz */ + }; + static const u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long ma = sil680_seldev(ap, adev, 0x08); + unsigned long ua = sil680_seldev(ap, adev, 0x0C); + unsigned long addr_mask = 0x80 + 4 * ap->port_no; + int port_shift = adev->devno * 4; + u8 scsc, mode; + u16 multi, ultra; + + pci_read_config_byte(pdev, 0x8A, &scsc); + pci_read_config_byte(pdev, addr_mask, &mode); + pci_read_config_word(pdev, ma, &multi); + pci_read_config_word(pdev, ua, &ultra); + + /* Mask timing bits */ + ultra &= ~0x3F; + mode &= ~(0x03 << port_shift); + + /* Extract scsc */ + scsc = (scsc & 0x30) ? 1 : 0; + + if (adev->dma_mode >= XFER_UDMA_0) { + multi = 0x10C1; + ultra |= ultra_table[scsc][adev->dma_mode - XFER_UDMA_0]; + mode |= (0x03 << port_shift); + } else { + multi = dma_table[adev->dma_mode - XFER_MW_DMA_0]; + mode |= (0x02 << port_shift); + } + pci_write_config_byte(pdev, addr_mask, mode); + pci_write_config_word(pdev, ma, multi); + pci_write_config_word(pdev, ua, ultra); +} + +/** + * sil680_sff_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues ATA command, with proper synchronization with interrupt + * handler / other threads. Use our MMIO space for PCI posting to avoid + * a hideously slow cycle all the way to the device. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static void sil680_sff_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); + iowrite8(tf->command, ap->ioaddr.command_addr); + ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); +} + +static bool sil680_sff_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long addr = sil680_selreg(ap, 1); + u8 val; + + pci_read_config_byte(pdev, addr, &val); + + return val & 0x08; +} + +static struct scsi_host_template sil680_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + + +static struct ata_port_operations sil680_port_ops = { + .inherits = &ata_bmdma32_port_ops, + .sff_exec_command = sil680_sff_exec_command, + .sff_irq_check = sil680_sff_irq_check, + .cable_detect = sil680_cable_detect, + .set_piomode = sil680_set_piomode, + .set_dmamode = sil680_set_dmamode, +}; + +/** + * sil680_init_chip - chip setup + * @pdev: PCI device + * + * Perform all the chip setup which must be done both when the device + * is powered up on boot and when we resume in case we resumed from RAM. + * Returns the final clock settings. + */ + +static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio) +{ + u8 tmpbyte = 0; + + /* FIXME: double check */ + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, + pdev->revision ? 1 : 255); + + pci_write_config_byte(pdev, 0x80, 0x00); + pci_write_config_byte(pdev, 0x84, 0x00); + + pci_read_config_byte(pdev, 0x8A, &tmpbyte); + + dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n", + tmpbyte & 1, tmpbyte & 0x30); + + *try_mmio = 0; +#ifdef CONFIG_PPC + if (machine_is(cell)) + *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5); +#endif + + switch (tmpbyte & 0x30) { + case 0x00: + /* 133 clock attempt to force it on */ + pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10); + break; + case 0x30: + /* if clocking is disabled */ + /* 133 clock attempt to force it on */ + pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20); + break; + case 0x10: + /* 133 already */ + break; + case 0x20: + /* BIOS set PCI x2 clocking */ + break; + } + + pci_read_config_byte(pdev, 0x8A, &tmpbyte); + dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n", + tmpbyte & 1, tmpbyte & 0x30); + + pci_write_config_byte(pdev, 0xA1, 0x72); + pci_write_config_word(pdev, 0xA2, 0x328A); + pci_write_config_dword(pdev, 0xA4, 0x62DD62DD); + pci_write_config_dword(pdev, 0xA8, 0x43924392); + pci_write_config_dword(pdev, 0xAC, 0x40094009); + pci_write_config_byte(pdev, 0xB1, 0x72); + pci_write_config_word(pdev, 0xB2, 0x328A); + pci_write_config_dword(pdev, 0xB4, 0x62DD62DD); + pci_write_config_dword(pdev, 0xB8, 0x43924392); + pci_write_config_dword(pdev, 0xBC, 0x40094009); + + switch (tmpbyte & 0x30) { + case 0x00: + printk(KERN_INFO "sil680: 100MHz clock.\n"); + break; + case 0x10: + printk(KERN_INFO "sil680: 133MHz clock.\n"); + break; + case 0x20: + printk(KERN_INFO "sil680: Using PCI clock.\n"); + break; + /* This last case is _NOT_ ok */ + case 0x30: + printk(KERN_ERR "sil680: Clock disabled ?\n"); + } + return tmpbyte & 0x30; +} + +static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &sil680_port_ops + }; + static const struct ata_port_info info_slow = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &sil680_port_ops + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + struct ata_host *host; + void __iomem *mmio_base; + int rc, try_mmio; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + switch (sil680_init_chip(pdev, &try_mmio)) { + case 0: + ppi[0] = &info_slow; + break; + case 0x30: + return -ENODEV; + } + + if (!try_mmio) + goto use_ioports; + + /* Try to acquire MMIO resources and fallback to PIO if + * that fails + */ + rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME); + if (rc) + goto use_ioports; + + /* Allocate host and set it up */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); + if (!host) + return -ENOMEM; + host->iomap = pcim_iomap_table(pdev); + + /* Setup DMA masks */ + rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + pci_set_master(pdev); + + /* Get MMIO base and initialize port addresses */ + mmio_base = host->iomap[SIL680_MMIO_BAR]; + host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x00; + host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80; + host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a; + host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a; + ata_sff_std_ports(&host->ports[0]->ioaddr); + host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08; + host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0; + host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca; + host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca; + ata_sff_std_ports(&host->ports[1]->ioaddr); + + /* Register & activate */ + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &sil680_sht); + +use_ioports: + return ata_pci_bmdma_init_one(pdev, ppi, &sil680_sht, NULL, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int sil680_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int try_mmio, rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + sil680_init_chip(pdev, &try_mmio); + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id sil680[] = { + { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), }, + + { }, +}; + +static struct pci_driver sil680_pci_driver = { + .name = DRV_NAME, + .id_table = sil680, + .probe = sil680_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = sil680_reinit_one, +#endif +}; + +module_pci_driver(sil680_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for SI680 PATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil680); +MODULE_VERSION(DRV_VERSION); |