diff options
Diffstat (limited to 'drivers/char/xilinx_hwicap/xilinx_hwicap.h')
| -rw-r--r-- | drivers/char/xilinx_hwicap/xilinx_hwicap.h | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h new file mode 100644 index 000000000..6b963d1c8 --- /dev/null +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h @@ -0,0 +1,224 @@ +/***************************************************************************** + * + * Author: Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" + * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND + * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, + * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, + * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION + * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, + * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE + * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY + * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE + * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR + * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF + * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE. + * + * (c) Copyright 2003-2007 Xilinx Inc. + * All rights reserved. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + *****************************************************************************/ + +#ifndef XILINX_HWICAP_H_ /* prevent circular inclusions */ +#define XILINX_HWICAP_H_ /* by using protection macros */ + +#include <linux/types.h> +#include <linux/cdev.h> +#include <linux/platform_device.h> + +#include <linux/io.h> + +struct hwicap_drvdata { + u32 write_buffer_in_use; /* Always in [0,3] */ + u8 write_buffer[4]; + u32 read_buffer_in_use; /* Always in [0,3] */ + u8 read_buffer[4]; + resource_size_t mem_start;/* phys. address of the control registers */ + resource_size_t mem_end; /* phys. address of the control registers */ + resource_size_t mem_size; + void __iomem *base_address;/* virt. address of the control registers */ + + struct device *dev; + struct cdev cdev; /* Char device structure */ + dev_t devt; + + const struct hwicap_driver_config *config; + const struct config_registers *config_regs; + void *private_data; + bool is_open; + struct mutex sem; +}; + +struct hwicap_driver_config { + /* Read configuration data given by size into the data buffer. + * Return 0 if successful. + */ + int (*get_configuration)(struct hwicap_drvdata *drvdata, u32 *data, + u32 size); + /* Write configuration data given by size from the data buffer. + * Return 0 if successful. + */ + int (*set_configuration)(struct hwicap_drvdata *drvdata, u32 *data, + u32 size); + /* Get the status register, bit pattern given by: + * D8 - 0 = configuration error + * D7 - 1 = alignment found + * D6 - 1 = readback in progress + * D5 - 0 = abort in progress + * D4 - Always 1 + * D3 - Always 1 + * D2 - Always 1 + * D1 - Always 1 + * D0 - 1 = operation completed + */ + u32 (*get_status)(struct hwicap_drvdata *drvdata); + /* Reset the hw */ + void (*reset)(struct hwicap_drvdata *drvdata); +}; + +/* Number of times to poll the done register. This has to be large + * enough to allow an entire configuration to complete. If an entire + * page (4kb) is configured at once, that could take up to 4k cycles + * with a byte-wide icap interface. In most cases, this driver is + * used with a much smaller fifo, but this should be sufficient in the + * worst case. + */ +#define XHI_MAX_RETRIES 5000 + +/************ Constant Definitions *************/ + +#define XHI_PAD_FRAMES 0x1 + +/* Mask for calculating configuration packet headers */ +#define XHI_WORD_COUNT_MASK_TYPE_1 0x7FFUL +#define XHI_WORD_COUNT_MASK_TYPE_2 0x1FFFFFUL +#define XHI_TYPE_MASK 0x7 +#define XHI_REGISTER_MASK 0xF +#define XHI_OP_MASK 0x3 + +#define XHI_TYPE_SHIFT 29 +#define XHI_REGISTER_SHIFT 13 +#define XHI_OP_SHIFT 27 + +#define XHI_TYPE_1 1 +#define XHI_TYPE_2 2 +#define XHI_OP_WRITE 2 +#define XHI_OP_READ 1 + +/* Address Block Types */ +#define XHI_FAR_CLB_BLOCK 0 +#define XHI_FAR_BRAM_BLOCK 1 +#define XHI_FAR_BRAM_INT_BLOCK 2 + +struct config_registers { + u32 CRC; + u32 FAR; + u32 FDRI; + u32 FDRO; + u32 CMD; + u32 CTL; + u32 MASK; + u32 STAT; + u32 LOUT; + u32 COR; + u32 MFWR; + u32 FLR; + u32 KEY; + u32 CBC; + u32 IDCODE; + u32 AXSS; + u32 C0R_1; + u32 CSOB; + u32 WBSTAR; + u32 TIMER; + u32 BOOTSTS; + u32 CTL_1; +}; + +/* Configuration Commands */ +#define XHI_CMD_NULL 0 +#define XHI_CMD_WCFG 1 +#define XHI_CMD_MFW 2 +#define XHI_CMD_DGHIGH 3 +#define XHI_CMD_RCFG 4 +#define XHI_CMD_START 5 +#define XHI_CMD_RCAP 6 +#define XHI_CMD_RCRC 7 +#define XHI_CMD_AGHIGH 8 +#define XHI_CMD_SWITCH 9 +#define XHI_CMD_GRESTORE 10 +#define XHI_CMD_SHUTDOWN 11 +#define XHI_CMD_GCAPTURE 12 +#define XHI_CMD_DESYNCH 13 +#define XHI_CMD_IPROG 15 /* Only in Virtex5 */ +#define XHI_CMD_CRCC 16 /* Only in Virtex5 */ +#define XHI_CMD_LTIMER 17 /* Only in Virtex5 */ + +/* Packet constants */ +#define XHI_SYNC_PACKET 0xAA995566UL +#define XHI_DUMMY_PACKET 0xFFFFFFFFUL +#define XHI_NOOP_PACKET (XHI_TYPE_1 << XHI_TYPE_SHIFT) +#define XHI_TYPE_2_READ ((XHI_TYPE_2 << XHI_TYPE_SHIFT) | \ + (XHI_OP_READ << XHI_OP_SHIFT)) + +#define XHI_TYPE_2_WRITE ((XHI_TYPE_2 << XHI_TYPE_SHIFT) | \ + (XHI_OP_WRITE << XHI_OP_SHIFT)) + +#define XHI_TYPE2_CNT_MASK 0x07FFFFFF + +#define XHI_TYPE_1_PACKET_MAX_WORDS 2047UL +#define XHI_TYPE_1_HEADER_BYTES 4 +#define XHI_TYPE_2_HEADER_BYTES 8 + +/* Constant to use for CRC check when CRC has been disabled */ +#define XHI_DISABLED_AUTO_CRC 0x0000DEFCUL + +/* Meanings of the bits returned by get_status */ +#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */ +#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */ +#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */ +#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */ +#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask */ + +/** + * hwicap_type_1_read - Generates a Type 1 read packet header. + * @reg: is the address of the register to be read back. + * + * Return: + * Generates a Type 1 read packet header, which is used to indirectly + * read registers in the configuration logic. This packet must then + * be sent through the icap device, and a return packet received with + * the information. + */ +static inline u32 hwicap_type_1_read(u32 reg) +{ + return (XHI_TYPE_1 << XHI_TYPE_SHIFT) | + (reg << XHI_REGISTER_SHIFT) | + (XHI_OP_READ << XHI_OP_SHIFT); +} + +/** + * hwicap_type_1_write - Generates a Type 1 write packet header + * @reg: is the address of the register to be read back. + * + * Return: Type 1 write packet header + */ +static inline u32 hwicap_type_1_write(u32 reg) +{ + return (XHI_TYPE_1 << XHI_TYPE_SHIFT) | + (reg << XHI_REGISTER_SHIFT) | + (XHI_OP_WRITE << XHI_OP_SHIFT); +} + +#endif |