1 files changed, 384 insertions, 0 deletions
diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c
new file mode 100644
index 000000000..a27c264cc
--- /dev/null
+++ b/drivers/clk/sunxi/clk-mod0.c
@@ -0,0 +1,384 @@
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "clk-factors.h"
+
+/**
+ * sun4i_a10_get_mod0_factors() - calculates m, n factors for MOD0-style clocks
+ * MOD0 rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+
+static void sun4i_a10_get_mod0_factors(struct factors_request *req)
+{
+	u8 div, calcm, calcp;
+
+	/* These clocks can only divide, so we will never be able to achieve
+	 * frequencies higher than the parent frequency */
+	if (req->rate > req->parent_rate)
+		req->rate = req->parent_rate;
+
+	div = DIV_ROUND_UP(req->parent_rate, req->rate);
+
+	if (div < 16)
+		calcp = 0;
+	else if (div / 2 < 16)
+		calcp = 1;
+	else if (div / 4 < 16)
+		calcp = 2;
+	else
+		calcp = 3;
+
+	calcm = DIV_ROUND_UP(div, 1 << calcp);
+
+	req->rate = (req->parent_rate >> calcp) / calcm;
+	req->m = calcm - 1;
+	req->p = calcp;
+}
+
+/* user manual says "n" but it's really "p" */
+static const struct clk_factors_config sun4i_a10_mod0_config = {
+	.mshift = 0,
+	.mwidth = 4,
+	.pshift = 16,
+	.pwidth = 2,
+};
+
+static const struct factors_data sun4i_a10_mod0_data = {
+	.enable = 31,
+	.mux = 24,
+	.muxmask = BIT(1) | BIT(0),
+	.table = &sun4i_a10_mod0_config,
+	.getter = sun4i_a10_get_mod0_factors,
+};
+
+static DEFINE_SPINLOCK(sun4i_a10_mod0_lock);
+
+static void __init sun4i_a10_mod0_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_iomap(node, 0);
+	if (!reg) {
+		/*
+		 * This happens with mod0 clk nodes instantiated through
+		 * mfd, as those do not have their resources assigned at
+		 * CLK_OF_DECLARE time yet, so do not print an error.
+		 */
+		return;
+	}
+
+	sunxi_factors_register(node, &sun4i_a10_mod0_data,
+			       &sun4i_a10_mod0_lock, reg);
+}
+CLK_OF_DECLARE_DRIVER(sun4i_a10_mod0, "allwinner,sun4i-a10-mod0-clk",
+		      sun4i_a10_mod0_setup);
+
+static int sun4i_a10_mod0_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *r;
+	void __iomem *reg;
+
+	if (!np)
+		return -ENODEV;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	sunxi_factors_register(np, &sun4i_a10_mod0_data,
+			       &sun4i_a10_mod0_lock, reg);
+	return 0;
+}
+
+static const struct of_device_id sun4i_a10_mod0_clk_dt_ids[] = {
+	{ .compatible = "allwinner,sun4i-a10-mod0-clk" },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver sun4i_a10_mod0_clk_driver = {
+	.driver = {
+		.name = "sun4i-a10-mod0-clk",
+		.of_match_table = sun4i_a10_mod0_clk_dt_ids,
+	},
+	.probe = sun4i_a10_mod0_clk_probe,
+};
+builtin_platform_driver(sun4i_a10_mod0_clk_driver);
+
+static const struct factors_data sun9i_a80_mod0_data __initconst = {
+	.enable = 31,
+	.mux = 24,
+	.muxmask = BIT(3) | BIT(2) | BIT(1) | BIT(0),
+	.table = &sun4i_a10_mod0_config,
+	.getter = sun4i_a10_get_mod0_factors,
+};
+
+static void __init sun9i_a80_mod0_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("Could not get registers for mod0-clk: %s\n",
+		       node->name);
+		return;
+	}
+
+	sunxi_factors_register(node, &sun9i_a80_mod0_data,
+			       &sun4i_a10_mod0_lock, reg);
+}
+CLK_OF_DECLARE(sun9i_a80_mod0, "allwinner,sun9i-a80-mod0-clk", sun9i_a80_mod0_setup);
+
+static DEFINE_SPINLOCK(sun5i_a13_mbus_lock);
+
+static void __init sun5i_a13_mbus_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_iomap(node, 0);
+	if (!reg) {
+		pr_err("Could not get registers for a13-mbus-clk\n");
+		return;
+	}
+
+	/* The MBUS clocks needs to be always enabled */
+	sunxi_factors_register_critical(node, &sun4i_a10_mod0_data,
+					&sun5i_a13_mbus_lock, reg);
+}
+CLK_OF_DECLARE(sun5i_a13_mbus, "allwinner,sun5i-a13-mbus-clk", sun5i_a13_mbus_setup);
+
+struct mmc_phase {
+	struct clk_hw		hw;
+	u8			offset;
+	void __iomem		*reg;
+	spinlock_t		*lock;
+};
+
+#define to_mmc_phase(_hw) container_of(_hw, struct mmc_phase, hw)
+
+static int mmc_get_phase(struct clk_hw *hw)
+{
+	struct clk *mmc, *mmc_parent, *clk = hw->clk;
+	struct mmc_phase *phase = to_mmc_phase(hw);
+	unsigned int mmc_rate, mmc_parent_rate;
+	u16 step, mmc_div;
+	u32 value;
+	u8 delay;
+
+	value = readl(phase->reg);
+	delay = (value >> phase->offset) & 0x3;
+
+	if (!delay)
+		return 180;
+
+	/* Get the main MMC clock */
+	mmc = clk_get_parent(clk);
+	if (!mmc)
+		return -EINVAL;
+
+	/* And its rate */
+	mmc_rate = clk_get_rate(mmc);
+	if (!mmc_rate)
+		return -EINVAL;
+
+	/* Now, get the MMC parent (most likely some PLL) */
+	mmc_parent = clk_get_parent(mmc);
+	if (!mmc_parent)
+		return -EINVAL;
+
+	/* And its rate */
+	mmc_parent_rate = clk_get_rate(mmc_parent);
+	if (!mmc_parent_rate)
+		return -EINVAL;
+
+	/* Get MMC clock divider */
+	mmc_div = mmc_parent_rate / mmc_rate;
+
+	step = DIV_ROUND_CLOSEST(360, mmc_div);
+	return delay * step;
+}
+
+static int mmc_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct clk *mmc, *mmc_parent, *clk = hw->clk;
+	struct mmc_phase *phase = to_mmc_phase(hw);
+	unsigned int mmc_rate, mmc_parent_rate;
+	unsigned long flags;
+	u32 value;
+	u8 delay;
+
+	/* Get the main MMC clock */
+	mmc = clk_get_parent(clk);
+	if (!mmc)
+		return -EINVAL;
+
+	/* And its rate */
+	mmc_rate = clk_get_rate(mmc);
+	if (!mmc_rate)
+		return -EINVAL;
+
+	/* Now, get the MMC parent (most likely some PLL) */
+	mmc_parent = clk_get_parent(mmc);
+	if (!mmc_parent)
+		return -EINVAL;
+
+	/* And its rate */
+	mmc_parent_rate = clk_get_rate(mmc_parent);
+	if (!mmc_parent_rate)
+		return -EINVAL;
+
+	if (degrees != 180) {
+		u16 step, mmc_div;
+
+		/* Get MMC clock divider */
+		mmc_div = mmc_parent_rate / mmc_rate;
+
+		/*
+		 * We can only outphase the clocks by multiple of the
+		 * PLL's period.
+		 *
+		 * Since the MMC clock in only a divider, and the
+		 * formula to get the outphasing in degrees is deg =
+		 * 360 * delta / period
+		 *
+		 * If we simplify this formula, we can see that the
+		 * only thing that we're concerned about is the number
+		 * of period we want to outphase our clock from, and
+		 * the divider set by the MMC clock.
+		 */
+		step = DIV_ROUND_CLOSEST(360, mmc_div);
+		delay = DIV_ROUND_CLOSEST(degrees, step);
+	} else {
+		delay = 0;
+	}
+
+	spin_lock_irqsave(phase->lock, flags);
+	value = readl(phase->reg);
+	value &= ~GENMASK(phase->offset + 3, phase->offset);
+	value |= delay << phase->offset;
+	writel(value, phase->reg);
+	spin_unlock_irqrestore(phase->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops mmc_clk_ops = {
+	.get_phase	= mmc_get_phase,
+	.set_phase	= mmc_set_phase,
+};
+
+/*
+ * sunxi_mmc_setup - Common setup function for mmc module clocks
+ *
+ * The only difference between module clocks on different platforms is the
+ * width of the mux register bits and the valid values, which are passed in
+ * through struct factors_data. The phase clocks parts are identical.
+ */
+static void __init sunxi_mmc_setup(struct device_node *node,
+				   const struct factors_data *data,
+				   spinlock_t *lock)
+{
+	struct clk_onecell_data *clk_data;
+	const char *parent;
+	void __iomem *reg;
+	int i;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("Couldn't map the %s clock registers\n", node->name);
+		return;
+	}
+
+	clk_data = kmalloc(sizeof(*clk_data), GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->clks = kcalloc(3, sizeof(*clk_data->clks), GFP_KERNEL);
+	if (!clk_data->clks)
+		goto err_free_data;
+
+	clk_data->clk_num = 3;
+	clk_data->clks[0] = sunxi_factors_register(node, data, lock, reg);
+	if (!clk_data->clks[0])
+		goto err_free_clks;
+
+	parent = __clk_get_name(clk_data->clks[0]);
+
+	for (i = 1; i < 3; i++) {
+		struct clk_init_data init = {
+			.num_parents	= 1,
+			.parent_names	= &parent,
+			.ops		= &mmc_clk_ops,
+		};
+		struct mmc_phase *phase;
+
+		phase = kmalloc(sizeof(*phase), GFP_KERNEL);
+		if (!phase)
+			continue;
+
+		phase->hw.init = &init;
+		phase->reg = reg;
+		phase->lock = lock;
+
+		if (i == 1)
+			phase->offset = 8;
+		else
+			phase->offset = 20;
+
+		if (of_property_read_string_index(node, "clock-output-names",
+						  i, &init.name))
+			init.name = node->name;
+
+		clk_data->clks[i] = clk_register(NULL, &phase->hw);
+		if (IS_ERR(clk_data->clks[i])) {
+			kfree(phase);
+			continue;
+		}
+	}
+
+	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	return;
+
+err_free_clks:
+	kfree(clk_data->clks);
+err_free_data:
+	kfree(clk_data);
+}
+
+static DEFINE_SPINLOCK(sun4i_a10_mmc_lock);
+
+static void __init sun4i_a10_mmc_setup(struct device_node *node)
+{
+	sunxi_mmc_setup(node, &sun4i_a10_mod0_data, &sun4i_a10_mmc_lock);
+}
+CLK_OF_DECLARE(sun4i_a10_mmc, "allwinner,sun4i-a10-mmc-clk", sun4i_a10_mmc_setup);
+
+static DEFINE_SPINLOCK(sun9i_a80_mmc_lock);
+
+static void __init sun9i_a80_mmc_setup(struct device_node *node)
+{
+	sunxi_mmc_setup(node, &sun9i_a80_mod0_data, &sun9i_a80_mmc_lock);
+}
+CLK_OF_DECLARE(sun9i_a80_mmc, "allwinner,sun9i-a80-mmc-clk", sun9i_a80_mmc_setup);