diff options
Diffstat (limited to 'drivers/extcon/extcon-axp288.c')
| -rw-r--r-- | drivers/extcon/extcon-axp288.c | 507 |
1 files changed, 507 insertions, 0 deletions
diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c new file mode 100644 index 000000000..363b403bd --- /dev/null +++ b/drivers/extcon/extcon-axp288.c @@ -0,0 +1,507 @@ +/* + * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver + * + * Copyright (c) 2017-2018 Hans de Goede <hdegoede@redhat.com> + * Copyright (C) 2015 Intel Corporation + * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/acpi.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/notifier.h> +#include <linux/extcon-provider.h> +#include <linux/regmap.h> +#include <linux/mfd/axp20x.h> +#include <linux/usb/role.h> +#include <linux/workqueue.h> + +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> + +/* Power source status register */ +#define PS_STAT_VBUS_TRIGGER BIT(0) +#define PS_STAT_BAT_CHRG_DIR BIT(2) +#define PS_STAT_VBUS_ABOVE_VHOLD BIT(3) +#define PS_STAT_VBUS_VALID BIT(4) +#define PS_STAT_VBUS_PRESENT BIT(5) + +/* BC module global register */ +#define BC_GLOBAL_RUN BIT(0) +#define BC_GLOBAL_DET_STAT BIT(2) +#define BC_GLOBAL_DBP_TOUT BIT(3) +#define BC_GLOBAL_VLGC_COM_SEL BIT(4) +#define BC_GLOBAL_DCD_TOUT_MASK (BIT(6)|BIT(5)) +#define BC_GLOBAL_DCD_TOUT_300MS 0 +#define BC_GLOBAL_DCD_TOUT_100MS 1 +#define BC_GLOBAL_DCD_TOUT_500MS 2 +#define BC_GLOBAL_DCD_TOUT_900MS 3 +#define BC_GLOBAL_DCD_DET_SEL BIT(7) + +/* BC module vbus control and status register */ +#define VBUS_CNTL_DPDM_PD_EN BIT(4) +#define VBUS_CNTL_DPDM_FD_EN BIT(5) +#define VBUS_CNTL_FIRST_PO_STAT BIT(6) + +/* BC USB status register */ +#define USB_STAT_BUS_STAT_MASK (BIT(3)|BIT(2)|BIT(1)|BIT(0)) +#define USB_STAT_BUS_STAT_SHIFT 0 +#define USB_STAT_BUS_STAT_ATHD 0 +#define USB_STAT_BUS_STAT_CONN 1 +#define USB_STAT_BUS_STAT_SUSP 2 +#define USB_STAT_BUS_STAT_CONF 3 +#define USB_STAT_USB_SS_MODE BIT(4) +#define USB_STAT_DEAD_BAT_DET BIT(6) +#define USB_STAT_DBP_UNCFG BIT(7) + +/* BC detect status register */ +#define DET_STAT_MASK (BIT(7)|BIT(6)|BIT(5)) +#define DET_STAT_SHIFT 5 +#define DET_STAT_SDP 1 +#define DET_STAT_CDP 2 +#define DET_STAT_DCP 3 + +enum axp288_extcon_reg { + AXP288_PS_STAT_REG = 0x00, + AXP288_PS_BOOT_REASON_REG = 0x02, + AXP288_BC_GLOBAL_REG = 0x2c, + AXP288_BC_VBUS_CNTL_REG = 0x2d, + AXP288_BC_USB_STAT_REG = 0x2e, + AXP288_BC_DET_STAT_REG = 0x2f, +}; + +enum axp288_extcon_irq { + VBUS_FALLING_IRQ = 0, + VBUS_RISING_IRQ, + MV_CHNG_IRQ, + BC_USB_CHNG_IRQ, + EXTCON_IRQ_END, +}; + +static const unsigned int axp288_extcon_cables[] = { + EXTCON_CHG_USB_SDP, + EXTCON_CHG_USB_CDP, + EXTCON_CHG_USB_DCP, + EXTCON_USB, + EXTCON_NONE, +}; + +struct axp288_extcon_info { + struct device *dev; + struct regmap *regmap; + struct regmap_irq_chip_data *regmap_irqc; + struct usb_role_switch *role_sw; + struct work_struct role_work; + int irq[EXTCON_IRQ_END]; + struct extcon_dev *edev; + struct extcon_dev *id_extcon; + struct notifier_block id_nb; + unsigned int previous_cable; + bool vbus_attach; +}; + +static const struct x86_cpu_id cherry_trail_cpu_ids[] = { + { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT, X86_FEATURE_ANY }, + {} +}; + +/* Power up/down reason string array */ +static const char * const axp288_pwr_up_down_info[] = { + "Last wake caused by user pressing the power button", + "Last wake caused by a charger insertion", + "Last wake caused by a battery insertion", + "Last wake caused by SOC initiated global reset", + "Last wake caused by cold reset", + "Last shutdown caused by PMIC UVLO threshold", + "Last shutdown caused by SOC initiated cold off", + "Last shutdown caused by user pressing the power button", + NULL, +}; + +/* + * Decode and log the given "reset source indicator" (rsi) + * register and then clear it. + */ +static void axp288_extcon_log_rsi(struct axp288_extcon_info *info) +{ + const char * const *rsi; + unsigned int val, i, clear_mask = 0; + int ret; + + ret = regmap_read(info->regmap, AXP288_PS_BOOT_REASON_REG, &val); + for (i = 0, rsi = axp288_pwr_up_down_info; *rsi; rsi++, i++) { + if (val & BIT(i)) { + dev_dbg(info->dev, "%s\n", *rsi); + clear_mask |= BIT(i); + } + } + + /* Clear the register value for next reboot (write 1 to clear bit) */ + regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask); +} + +/* + * The below code to control the USB role-switch on devices with an AXP288 + * may seem out of place, but there are 2 reasons why this is the best place + * to control the USB role-switch on such devices: + * 1) On many devices the USB role is controlled by AML code, but the AML code + * only switches between the host and none roles, because of Windows not + * really using device mode. To make device mode work we need to toggle + * between the none/device roles based on Vbus presence, and this driver + * gets interrupts on Vbus insertion / removal. + * 2) In order for our BC1.2 charger detection to work properly the role + * mux must be properly set to device mode before we do the detection. + */ + +/* Returns the id-pin value, note pulled low / false == host-mode */ +static bool axp288_get_id_pin(struct axp288_extcon_info *info) +{ + enum usb_role role; + + if (info->id_extcon) + return extcon_get_state(info->id_extcon, EXTCON_USB_HOST) <= 0; + + /* We cannot access the id-pin, see what mode the AML code has set */ + role = usb_role_switch_get_role(info->role_sw); + return role != USB_ROLE_HOST; +} + +static void axp288_usb_role_work(struct work_struct *work) +{ + struct axp288_extcon_info *info = + container_of(work, struct axp288_extcon_info, role_work); + enum usb_role role; + bool id_pin; + int ret; + + id_pin = axp288_get_id_pin(info); + if (!id_pin) + role = USB_ROLE_HOST; + else if (info->vbus_attach) + role = USB_ROLE_DEVICE; + else + role = USB_ROLE_NONE; + + ret = usb_role_switch_set_role(info->role_sw, role); + if (ret) + dev_err(info->dev, "failed to set role: %d\n", ret); +} + +static bool axp288_get_vbus_attach(struct axp288_extcon_info *info) +{ + int ret, pwr_stat; + + ret = regmap_read(info->regmap, AXP288_PS_STAT_REG, &pwr_stat); + if (ret < 0) { + dev_err(info->dev, "failed to read vbus status\n"); + return false; + } + + return !!(pwr_stat & PS_STAT_VBUS_VALID); +} + +static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) +{ + int ret, stat, cfg; + u8 chrg_type; + unsigned int cable = info->previous_cable; + bool vbus_attach = false; + + vbus_attach = axp288_get_vbus_attach(info); + if (!vbus_attach) + goto no_vbus; + + /* Check charger detection completion status */ + ret = regmap_read(info->regmap, AXP288_BC_GLOBAL_REG, &cfg); + if (ret < 0) + goto dev_det_ret; + if (cfg & BC_GLOBAL_DET_STAT) { + dev_dbg(info->dev, "can't complete the charger detection\n"); + goto dev_det_ret; + } + + ret = regmap_read(info->regmap, AXP288_BC_DET_STAT_REG, &stat); + if (ret < 0) + goto dev_det_ret; + + chrg_type = (stat & DET_STAT_MASK) >> DET_STAT_SHIFT; + + switch (chrg_type) { + case DET_STAT_SDP: + dev_dbg(info->dev, "sdp cable is connected\n"); + cable = EXTCON_CHG_USB_SDP; + break; + case DET_STAT_CDP: + dev_dbg(info->dev, "cdp cable is connected\n"); + cable = EXTCON_CHG_USB_CDP; + break; + case DET_STAT_DCP: + dev_dbg(info->dev, "dcp cable is connected\n"); + cable = EXTCON_CHG_USB_DCP; + break; + default: + dev_warn(info->dev, "unknown (reserved) bc detect result\n"); + cable = EXTCON_CHG_USB_SDP; + } + +no_vbus: + extcon_set_state_sync(info->edev, info->previous_cable, false); + if (info->previous_cable == EXTCON_CHG_USB_SDP) + extcon_set_state_sync(info->edev, EXTCON_USB, false); + + if (vbus_attach) { + extcon_set_state_sync(info->edev, cable, vbus_attach); + if (cable == EXTCON_CHG_USB_SDP) + extcon_set_state_sync(info->edev, EXTCON_USB, + vbus_attach); + + info->previous_cable = cable; + } + + if (info->role_sw && info->vbus_attach != vbus_attach) { + info->vbus_attach = vbus_attach; + /* Setting the role can take a while */ + queue_work(system_long_wq, &info->role_work); + } + + return 0; + +dev_det_ret: + if (ret < 0) + dev_err(info->dev, "failed to detect BC Mod\n"); + + return ret; +} + +static int axp288_extcon_id_evt(struct notifier_block *nb, + unsigned long event, void *param) +{ + struct axp288_extcon_info *info = + container_of(nb, struct axp288_extcon_info, id_nb); + + /* We may not sleep and setting the role can take a while */ + queue_work(system_long_wq, &info->role_work); + + return NOTIFY_OK; +} + +static irqreturn_t axp288_extcon_isr(int irq, void *data) +{ + struct axp288_extcon_info *info = data; + int ret; + + ret = axp288_handle_chrg_det_event(info); + if (ret < 0) + dev_err(info->dev, "failed to handle the interrupt\n"); + + return IRQ_HANDLED; +} + +static void axp288_extcon_enable(struct axp288_extcon_info *info) +{ + regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG, + BC_GLOBAL_RUN, 0); + /* Enable the charger detection logic */ + regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG, + BC_GLOBAL_RUN, BC_GLOBAL_RUN); +} + +static void axp288_put_role_sw(void *data) +{ + struct axp288_extcon_info *info = data; + + cancel_work_sync(&info->role_work); + usb_role_switch_put(info->role_sw); +} + +static int axp288_extcon_probe(struct platform_device *pdev) +{ + struct axp288_extcon_info *info; + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + const char *name; + int ret, i, pirq; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->dev = &pdev->dev; + info->regmap = axp20x->regmap; + info->regmap_irqc = axp20x->regmap_irqc; + info->previous_cable = EXTCON_NONE; + INIT_WORK(&info->role_work, axp288_usb_role_work); + info->id_nb.notifier_call = axp288_extcon_id_evt; + + platform_set_drvdata(pdev, info); + + info->role_sw = usb_role_switch_get(dev); + if (IS_ERR(info->role_sw)) + return PTR_ERR(info->role_sw); + if (info->role_sw) { + ret = devm_add_action_or_reset(dev, axp288_put_role_sw, info); + if (ret) + return ret; + + name = acpi_dev_get_first_match_name("INT3496", NULL, -1); + if (name) { + info->id_extcon = extcon_get_extcon_dev(name); + if (!info->id_extcon) + return -EPROBE_DEFER; + + dev_info(dev, "controlling USB role\n"); + } else { + dev_info(dev, "controlling USB role based on Vbus presence\n"); + } + } + + info->vbus_attach = axp288_get_vbus_attach(info); + + axp288_extcon_log_rsi(info); + + /* Initialize extcon device */ + info->edev = devm_extcon_dev_allocate(&pdev->dev, + axp288_extcon_cables); + if (IS_ERR(info->edev)) { + dev_err(&pdev->dev, "failed to allocate memory for extcon\n"); + return PTR_ERR(info->edev); + } + + /* Register extcon device */ + ret = devm_extcon_dev_register(&pdev->dev, info->edev); + if (ret) { + dev_err(&pdev->dev, "failed to register extcon device\n"); + return ret; + } + + for (i = 0; i < EXTCON_IRQ_END; i++) { + pirq = platform_get_irq(pdev, i); + if (pirq < 0) + return pirq; + + info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq); + if (info->irq[i] < 0) { + dev_err(&pdev->dev, + "failed to get virtual interrupt=%d\n", pirq); + ret = info->irq[i]; + return ret; + } + + ret = devm_request_threaded_irq(&pdev->dev, info->irq[i], + NULL, axp288_extcon_isr, + IRQF_ONESHOT | IRQF_NO_SUSPEND, + pdev->name, info); + if (ret) { + dev_err(&pdev->dev, "failed to request interrupt=%d\n", + info->irq[i]); + return ret; + } + } + + if (info->id_extcon) { + ret = devm_extcon_register_notifier_all(dev, info->id_extcon, + &info->id_nb); + if (ret) + return ret; + } + + /* Make sure the role-sw is set correctly before doing BC detection */ + if (info->role_sw) { + queue_work(system_long_wq, &info->role_work); + flush_work(&info->role_work); + } + + /* Start charger cable type detection */ + axp288_extcon_enable(info); + + device_init_wakeup(dev, true); + platform_set_drvdata(pdev, info); + + return 0; +} + +static int __maybe_unused axp288_extcon_suspend(struct device *dev) +{ + struct axp288_extcon_info *info = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(info->irq[VBUS_RISING_IRQ]); + + return 0; +} + +static int __maybe_unused axp288_extcon_resume(struct device *dev) +{ + struct axp288_extcon_info *info = dev_get_drvdata(dev); + + /* + * Wakeup when a charger is connected to do charger-type + * connection and generate an extcon event which makes the + * axp288 charger driver set the input current limit. + */ + if (device_may_wakeup(dev)) + disable_irq_wake(info->irq[VBUS_RISING_IRQ]); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(axp288_extcon_pm_ops, axp288_extcon_suspend, + axp288_extcon_resume); + +static const struct platform_device_id axp288_extcon_table[] = { + { .name = "axp288_extcon" }, + {}, +}; +MODULE_DEVICE_TABLE(platform, axp288_extcon_table); + +static struct platform_driver axp288_extcon_driver = { + .probe = axp288_extcon_probe, + .id_table = axp288_extcon_table, + .driver = { + .name = "axp288_extcon", + .pm = &axp288_extcon_pm_ops, + }, +}; + +static struct device_connection axp288_extcon_role_sw_conn = { + .endpoint[0] = "axp288_extcon", + .endpoint[1] = "intel_xhci_usb_sw-role-switch", + .id = "usb-role-switch", +}; + +static int __init axp288_extcon_init(void) +{ + if (x86_match_cpu(cherry_trail_cpu_ids)) + device_connection_add(&axp288_extcon_role_sw_conn); + + return platform_driver_register(&axp288_extcon_driver); +} +module_init(axp288_extcon_init); + +static void __exit axp288_extcon_exit(void) +{ + if (x86_match_cpu(cherry_trail_cpu_ids)) + device_connection_remove(&axp288_extcon_role_sw_conn); + + platform_driver_unregister(&axp288_extcon_driver); +} +module_exit(axp288_extcon_exit); + +MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_DESCRIPTION("X-Powers AXP288 extcon driver"); +MODULE_LICENSE("GPL v2"); |