diff options
Diffstat (limited to 'drivers/gpio/gpio-stmpe.c')
-rw-r--r-- | drivers/gpio/gpio-stmpe.c | 538 |
1 files changed, 538 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c new file mode 100644 index 000000000..65a2315f1 --- /dev/null +++ b/drivers/gpio/gpio-stmpe.c @@ -0,0 +1,538 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/of.h> +#include <linux/mfd/stmpe.h> +#include <linux/seq_file.h> +#include <linux/bitops.h> + +/* + * These registers are modified under the irq bus lock and cached to avoid + * unnecessary writes in bus_sync_unlock. + */ +enum { REG_RE, REG_FE, REG_IE }; + +enum { LSB, CSB, MSB }; + +#define CACHE_NR_REGS 3 +/* No variant has more than 24 GPIOs */ +#define CACHE_NR_BANKS (24 / 8) + +struct stmpe_gpio { + struct gpio_chip chip; + struct stmpe *stmpe; + struct device *dev; + struct mutex irq_lock; + u32 norequest_mask; + /* Caches of interrupt control registers for bus_lock */ + u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS]; + u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS]; +}; + +static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)]; + u8 mask = BIT(offset % 8); + int ret; + + ret = stmpe_reg_read(stmpe, reg); + if (ret < 0) + return ret; + + return !!(ret & mask); +} + +static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB; + u8 reg = stmpe->regs[which + (offset / 8)]; + u8 mask = BIT(offset % 8); + + /* + * Some variants have single register for gpio set/clear functionality. + * For them we need to write 0 to clear and 1 to set. + */ + if (stmpe->regs[STMPE_IDX_GPSR_LSB] == stmpe->regs[STMPE_IDX_GPCR_LSB]) + stmpe_set_bits(stmpe, reg, mask, val ? mask : 0); + else + stmpe_reg_write(stmpe, reg, mask); +} + +static int stmpe_gpio_get_direction(struct gpio_chip *chip, + unsigned offset) +{ + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); + u8 mask = BIT(offset % 8); + int ret; + + ret = stmpe_reg_read(stmpe, reg); + if (ret < 0) + return ret; + + return !(ret & mask); +} + +static int stmpe_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int val) +{ + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)]; + u8 mask = BIT(offset % 8); + + stmpe_gpio_set(chip, offset, val); + + return stmpe_set_bits(stmpe, reg, mask, mask); +} + +static int stmpe_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)]; + u8 mask = BIT(offset % 8); + + return stmpe_set_bits(stmpe, reg, mask, 0); +} + +static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + + if (stmpe_gpio->norequest_mask & BIT(offset)) + return -EINVAL; + + return stmpe_set_altfunc(stmpe, BIT(offset), STMPE_BLOCK_GPIO); +} + +static const struct gpio_chip template_chip = { + .label = "stmpe", + .owner = THIS_MODULE, + .get_direction = stmpe_gpio_get_direction, + .direction_input = stmpe_gpio_direction_input, + .get = stmpe_gpio_get, + .direction_output = stmpe_gpio_direction_output, + .set = stmpe_gpio_set, + .request = stmpe_gpio_request, + .can_sleep = true, +}; + +static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); + int offset = d->hwirq; + int regoffset = offset / 8; + int mask = BIT(offset % 8); + + if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH) + return -EINVAL; + + /* STMPE801 and STMPE 1600 don't have RE and FE registers */ + if (stmpe_gpio->stmpe->partnum == STMPE801 || + stmpe_gpio->stmpe->partnum == STMPE1600) + return 0; + + if (type & IRQ_TYPE_EDGE_RISING) + stmpe_gpio->regs[REG_RE][regoffset] |= mask; + else + stmpe_gpio->regs[REG_RE][regoffset] &= ~mask; + + if (type & IRQ_TYPE_EDGE_FALLING) + stmpe_gpio->regs[REG_FE][regoffset] |= mask; + else + stmpe_gpio->regs[REG_FE][regoffset] &= ~mask; + + return 0; +} + +static void stmpe_gpio_irq_lock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); + + mutex_lock(&stmpe_gpio->irq_lock); +} + +static void stmpe_gpio_irq_sync_unlock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); + struct stmpe *stmpe = stmpe_gpio->stmpe; + int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); + static const u8 regmap[CACHE_NR_REGS][CACHE_NR_BANKS] = { + [REG_RE][LSB] = STMPE_IDX_GPRER_LSB, + [REG_RE][CSB] = STMPE_IDX_GPRER_CSB, + [REG_RE][MSB] = STMPE_IDX_GPRER_MSB, + [REG_FE][LSB] = STMPE_IDX_GPFER_LSB, + [REG_FE][CSB] = STMPE_IDX_GPFER_CSB, + [REG_FE][MSB] = STMPE_IDX_GPFER_MSB, + [REG_IE][LSB] = STMPE_IDX_IEGPIOR_LSB, + [REG_IE][CSB] = STMPE_IDX_IEGPIOR_CSB, + [REG_IE][MSB] = STMPE_IDX_IEGPIOR_MSB, + }; + int i, j; + + /* + * STMPE1600: to be able to get IRQ from pins, + * a read must be done on GPMR register, or a write in + * GPSR or GPCR registers + */ + if (stmpe->partnum == STMPE1600) { + stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_LSB]); + stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_CSB]); + } + + for (i = 0; i < CACHE_NR_REGS; i++) { + /* STMPE801 and STMPE1600 don't have RE and FE registers */ + if ((stmpe->partnum == STMPE801 || + stmpe->partnum == STMPE1600) && + (i != REG_IE)) + continue; + + for (j = 0; j < num_banks; j++) { + u8 old = stmpe_gpio->oldregs[i][j]; + u8 new = stmpe_gpio->regs[i][j]; + + if (new == old) + continue; + + stmpe_gpio->oldregs[i][j] = new; + stmpe_reg_write(stmpe, stmpe->regs[regmap[i][j]], new); + } + } + + mutex_unlock(&stmpe_gpio->irq_lock); +} + +static void stmpe_gpio_irq_mask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); + int offset = d->hwirq; + int regoffset = offset / 8; + int mask = BIT(offset % 8); + + stmpe_gpio->regs[REG_IE][regoffset] &= ~mask; +} + +static void stmpe_gpio_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); + int offset = d->hwirq; + int regoffset = offset / 8; + int mask = BIT(offset % 8); + + stmpe_gpio->regs[REG_IE][regoffset] |= mask; +} + +static void stmpe_dbg_show_one(struct seq_file *s, + struct gpio_chip *gc, + unsigned offset, unsigned gpio) +{ + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); + struct stmpe *stmpe = stmpe_gpio->stmpe; + const char *label = gpiochip_is_requested(gc, offset); + bool val = !!stmpe_gpio_get(gc, offset); + u8 bank = offset / 8; + u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank]; + u8 mask = BIT(offset % 8); + int ret; + u8 dir; + + ret = stmpe_reg_read(stmpe, dir_reg); + if (ret < 0) + return; + dir = !!(ret & mask); + + if (dir) { + seq_printf(s, " gpio-%-3d (%-20.20s) out %s", + gpio, label ?: "(none)", + val ? "hi" : "lo"); + } else { + u8 edge_det_reg; + u8 rise_reg; + u8 fall_reg; + u8 irqen_reg; + + static const char * const edge_det_values[] = { + "edge-inactive", + "edge-asserted", + "not-supported" + }; + static const char * const rise_values[] = { + "no-rising-edge-detection", + "rising-edge-detection", + "not-supported" + }; + static const char * const fall_values[] = { + "no-falling-edge-detection", + "falling-edge-detection", + "not-supported" + }; + #define NOT_SUPPORTED_IDX 2 + u8 edge_det = NOT_SUPPORTED_IDX; + u8 rise = NOT_SUPPORTED_IDX; + u8 fall = NOT_SUPPORTED_IDX; + bool irqen; + + switch (stmpe->partnum) { + case STMPE610: + case STMPE811: + case STMPE1601: + case STMPE2401: + case STMPE2403: + edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_LSB + bank]; + ret = stmpe_reg_read(stmpe, edge_det_reg); + if (ret < 0) + return; + edge_det = !!(ret & mask); + /* fall through */ + case STMPE1801: + rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank]; + fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank]; + + ret = stmpe_reg_read(stmpe, rise_reg); + if (ret < 0) + return; + rise = !!(ret & mask); + ret = stmpe_reg_read(stmpe, fall_reg); + if (ret < 0) + return; + fall = !!(ret & mask); + /* fall through */ + case STMPE801: + case STMPE1600: + irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank]; + break; + + default: + return; + } + + ret = stmpe_reg_read(stmpe, irqen_reg); + if (ret < 0) + return; + irqen = !!(ret & mask); + + seq_printf(s, " gpio-%-3d (%-20.20s) in %s %13s %13s %25s %25s", + gpio, label ?: "(none)", + val ? "hi" : "lo", + edge_det_values[edge_det], + irqen ? "IRQ-enabled" : "IRQ-disabled", + rise_values[rise], + fall_values[fall]); + } +} + +static void stmpe_dbg_show(struct seq_file *s, struct gpio_chip *gc) +{ + unsigned i; + unsigned gpio = gc->base; + + for (i = 0; i < gc->ngpio; i++, gpio++) { + stmpe_dbg_show_one(s, gc, i, gpio); + seq_putc(s, '\n'); + } +} + +static struct irq_chip stmpe_gpio_irq_chip = { + .name = "stmpe-gpio", + .irq_bus_lock = stmpe_gpio_irq_lock, + .irq_bus_sync_unlock = stmpe_gpio_irq_sync_unlock, + .irq_mask = stmpe_gpio_irq_mask, + .irq_unmask = stmpe_gpio_irq_unmask, + .irq_set_type = stmpe_gpio_irq_set_type, +}; + +#define MAX_GPIOS 24 + +static irqreturn_t stmpe_gpio_irq(int irq, void *dev) +{ + struct stmpe_gpio *stmpe_gpio = dev; + struct stmpe *stmpe = stmpe_gpio->stmpe; + u8 statmsbreg; + int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); + u8 status[DIV_ROUND_UP(MAX_GPIOS, 8)]; + int ret; + int i; + + /* + * the stmpe_block_read() call below, imposes to set statmsbreg + * with the register located at the lowest address. As STMPE1600 + * variant is the only one which respect registers address's order + * (LSB regs located at lowest address than MSB ones) whereas all + * the others have a registers layout with MSB located before the + * LSB regs. + */ + if (stmpe->partnum == STMPE1600) + statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_LSB]; + else + statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB]; + + ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status); + if (ret < 0) + return IRQ_NONE; + + for (i = 0; i < num_banks; i++) { + int bank = (stmpe_gpio->stmpe->partnum == STMPE1600) ? i : + num_banks - i - 1; + unsigned int enabled = stmpe_gpio->regs[REG_IE][bank]; + unsigned int stat = status[i]; + + stat &= enabled; + if (!stat) + continue; + + while (stat) { + int bit = __ffs(stat); + int line = bank * 8 + bit; + int child_irq = irq_find_mapping(stmpe_gpio->chip.irq.domain, + line); + + handle_nested_irq(child_irq); + stat &= ~BIT(bit); + } + + /* + * interrupt status register write has no effect on + * 801/1801/1600, bits are cleared when read. + * Edge detect register is not present on 801/1600/1801 + */ + if (stmpe->partnum != STMPE801 && stmpe->partnum != STMPE1600 && + stmpe->partnum != STMPE1801) { + stmpe_reg_write(stmpe, statmsbreg + i, status[i]); + stmpe_reg_write(stmpe, + stmpe->regs[STMPE_IDX_GPEDR_MSB] + i, + status[i]); + } + } + + return IRQ_HANDLED; +} + +static int stmpe_gpio_probe(struct platform_device *pdev) +{ + struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); + struct device_node *np = pdev->dev.of_node; + struct stmpe_gpio *stmpe_gpio; + int ret, irq; + + if (stmpe->num_gpios > MAX_GPIOS) { + dev_err(&pdev->dev, "Need to increase maximum GPIO number\n"); + return -EINVAL; + } + + stmpe_gpio = kzalloc(sizeof(*stmpe_gpio), GFP_KERNEL); + if (!stmpe_gpio) + return -ENOMEM; + + mutex_init(&stmpe_gpio->irq_lock); + + stmpe_gpio->dev = &pdev->dev; + stmpe_gpio->stmpe = stmpe; + stmpe_gpio->chip = template_chip; + stmpe_gpio->chip.ngpio = stmpe->num_gpios; + stmpe_gpio->chip.parent = &pdev->dev; + stmpe_gpio->chip.of_node = np; + stmpe_gpio->chip.base = -1; + + if (IS_ENABLED(CONFIG_DEBUG_FS)) + stmpe_gpio->chip.dbg_show = stmpe_dbg_show; + + of_property_read_u32(np, "st,norequest-mask", + &stmpe_gpio->norequest_mask); + if (stmpe_gpio->norequest_mask) + stmpe_gpio->chip.irq.need_valid_mask = true; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + dev_info(&pdev->dev, + "device configured in no-irq mode: " + "irqs are not available\n"); + + ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO); + if (ret) + goto out_free; + + ret = gpiochip_add_data(&stmpe_gpio->chip, stmpe_gpio); + if (ret) { + dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret); + goto out_disable; + } + + if (irq > 0) { + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + stmpe_gpio_irq, IRQF_ONESHOT, + "stmpe-gpio", stmpe_gpio); + if (ret) { + dev_err(&pdev->dev, "unable to get irq: %d\n", ret); + goto out_disable; + } + if (stmpe_gpio->norequest_mask) { + int i; + + /* Forbid unused lines to be mapped as IRQs */ + for (i = 0; i < sizeof(u32); i++) + if (stmpe_gpio->norequest_mask & BIT(i)) + clear_bit(i, stmpe_gpio->chip.irq.valid_mask); + } + ret = gpiochip_irqchip_add_nested(&stmpe_gpio->chip, + &stmpe_gpio_irq_chip, + 0, + handle_simple_irq, + IRQ_TYPE_NONE); + if (ret) { + dev_err(&pdev->dev, + "could not connect irqchip to gpiochip\n"); + goto out_disable; + } + + gpiochip_set_nested_irqchip(&stmpe_gpio->chip, + &stmpe_gpio_irq_chip, + irq); + } + + platform_set_drvdata(pdev, stmpe_gpio); + + return 0; + +out_disable: + stmpe_disable(stmpe, STMPE_BLOCK_GPIO); + gpiochip_remove(&stmpe_gpio->chip); +out_free: + kfree(stmpe_gpio); + return ret; +} + +static struct platform_driver stmpe_gpio_driver = { + .driver = { + .suppress_bind_attrs = true, + .name = "stmpe-gpio", + }, + .probe = stmpe_gpio_probe, +}; + +static int __init stmpe_gpio_init(void) +{ + return platform_driver_register(&stmpe_gpio_driver); +} +subsys_initcall(stmpe_gpio_init); |