diff options
Diffstat (limited to 'drivers/gpio')
153 files changed, 64127 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig new file mode 100644 index 000000000..2c34e9537 --- /dev/null +++ b/drivers/gpio/Kconfig @@ -0,0 +1,1392 @@ +# +# GPIO infrastructure and drivers +# + +config ARCH_HAVE_CUSTOM_GPIO_H + bool + help + Selecting this config option from the architecture Kconfig allows + the architecture to provide a custom asm/gpio.h implementation + overriding the default implementations. New uses of this are + strongly discouraged. + +menuconfig GPIOLIB + bool "GPIO Support" + select ANON_INODES + help + This enables GPIO support through the generic GPIO library. + You only need to enable this, if you also want to enable + one or more of the GPIO drivers below. + + If unsure, say N. + +if GPIOLIB + +config GPIOLIB_FASTPATH_LIMIT + int "Maximum number of GPIOs for fast path" + range 32 512 + default 512 + help + This adjusts the point at which certain APIs will switch from + using a stack allocated buffer to a dynamically allocated buffer. + + You shouldn't need to change this unless you really need to + optimize either stack space or performance. Change this carefully + since setting an incorrect value could cause stack corruption. + +config OF_GPIO + def_bool y + depends on OF + depends on HAS_IOMEM + +config GPIO_ACPI + def_bool y + depends on ACPI + +config GPIOLIB_IRQCHIP + select IRQ_DOMAIN + bool + +config DEBUG_GPIO + bool "Debug GPIO calls" + depends on DEBUG_KERNEL + help + Say Y here to add some extra checks and diagnostics to GPIO calls. + These checks help ensure that GPIOs have been properly initialized + before they are used, and that sleeping calls are not made from + non-sleeping contexts. They can make bitbanged serial protocols + slower. The diagnostics help catch the type of setup errors + that are most common when setting up new platforms or boards. + +config GPIO_SYSFS + bool "/sys/class/gpio/... (sysfs interface)" + depends on SYSFS + help + Say Y here to add a sysfs interface for GPIOs. + + This is mostly useful to work around omissions in a system's + kernel support. Those are common in custom and semicustom + hardware assembled using standard kernels with a minimum of + custom patches. In those cases, userspace code may import + a given GPIO from the kernel, if no kernel driver requested it. + + Kernel drivers may also request that a particular GPIO be + exported to userspace; this can be useful when debugging. + +config GPIO_GENERIC + depends on HAS_IOMEM # Only for IOMEM drivers + tristate + +# put drivers in the right section, in alphabetical order + +# This symbol is selected by both I2C and SPI expanders +config GPIO_MAX730X + tristate + +menu "Memory mapped GPIO drivers" + depends on HAS_IOMEM + +config GPIO_74XX_MMIO + tristate "GPIO driver for 74xx-ICs with MMIO access" + depends on OF_GPIO + select GPIO_GENERIC + help + Say yes here to support GPIO functionality for 74xx-compatible ICs + with MMIO access. Compatible models include: + 1 bit: 741G125 (Input), 741G74 (Output) + 2 bits: 742G125 (Input), 7474 (Output) + 4 bits: 74125 (Input), 74175 (Output) + 6 bits: 74365 (Input), 74174 (Output) + 8 bits: 74244 (Input), 74273 (Output) + 16 bits: 741624 (Input), 7416374 (Output) + +config GPIO_ALTERA + tristate "Altera GPIO" + depends on OF_GPIO + select GPIOLIB_IRQCHIP + help + Say Y or M here to build support for the Altera PIO device. + + If driver is built as a module it will be called gpio-altera. + +config GPIO_AMDPT + tristate "AMD Promontory GPIO support" + depends on ACPI + select GPIO_GENERIC + help + driver for GPIO functionality on Promontory IOHub + Require ACPI ASL code to enumerate as a platform device. + +config GPIO_ASPEED + tristate "Aspeed GPIO support" + depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO + select GPIOLIB_IRQCHIP + help + Say Y here to support Aspeed AST2400 and AST2500 GPIO controllers. + +config GPIO_ATH79 + tristate "Atheros AR71XX/AR724X/AR913X GPIO support" + default y if ATH79 + depends on ATH79 || COMPILE_TEST + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help + Select this option to enable GPIO driver for + Atheros AR71XX/AR724X/AR913X SoC devices. + +config GPIO_RASPBERRYPI_EXP + tristate "Raspberry Pi 3 GPIO Expander" + default RASPBERRYPI_FIRMWARE + depends on OF_GPIO + # Make sure not 'y' when RASPBERRYPI_FIRMWARE is 'm'. This can only + # happen when COMPILE_TEST=y, hence the added !RASPBERRYPI_FIRMWARE. + depends on (ARCH_BCM2835 && RASPBERRYPI_FIRMWARE) || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) + help + Turn on GPIO support for the expander on Raspberry Pi 3 boards, using + the firmware mailbox to communicate with VideoCore on BCM283x chips. + +config GPIO_BCM_KONA + bool "Broadcom Kona GPIO" + depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST) + help + Turn on GPIO support for Broadcom "Kona" chips. + +config GPIO_BRCMSTB + tristate "BRCMSTB GPIO support" + default y if (ARCH_BRCMSTB || BMIPS_GENERIC) + depends on OF_GPIO && (ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST) + select GPIO_GENERIC + select IRQ_DOMAIN + help + Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs. + +config GPIO_CLPS711X + tristate "CLPS711X GPIO support" + depends on ARCH_CLPS711X || COMPILE_TEST + select GPIO_GENERIC + help + Say yes here to support GPIO on CLPS711X SoCs. + +config GPIO_DAVINCI + bool "TI Davinci/Keystone GPIO support" + default y if ARCH_DAVINCI + depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE) + help + Say yes here to enable GPIO support for TI Davinci/Keystone SoCs. + +config GPIO_DWAPB + tristate "Synopsys DesignWare APB GPIO driver" + select GPIO_GENERIC + select GENERIC_IRQ_CHIP + help + Say Y or M here to build support for the Synopsys DesignWare APB + GPIO block. + +config GPIO_EIC_SPRD + tristate "Spreadtrum EIC support" + depends on ARCH_SPRD || COMPILE_TEST + depends on OF_GPIO + select GPIOLIB_IRQCHIP + help + Say yes here to support Spreadtrum EIC device. + +config GPIO_EM + tristate "Emma Mobile GPIO" + depends on (ARCH_EMEV2 || COMPILE_TEST) && OF_GPIO + help + Say yes here to support GPIO on Renesas Emma Mobile SoCs. + +config GPIO_EP93XX + def_bool y + depends on ARCH_EP93XX + select GPIO_GENERIC + +config GPIO_EXAR + tristate "Support for GPIO pins on XR17V352/354/358" + depends on SERIAL_8250_EXAR + help + Selecting this option will enable handling of GPIO pins present + on Exar XR17V352/354/358 chips. + +config GPIO_GE_FPGA + bool "GE FPGA based GPIO" + depends on GE_FPGA + select GPIO_GENERIC + help + Support for common GPIO functionality provided on some GE Single Board + Computers. + + This driver provides basic support (configure as input or output, read + and write pin state) for GPIO implemented in a number of GE single + board computers. + +config GPIO_FTGPIO010 + bool "Faraday FTGPIO010 GPIO" + depends on OF_GPIO + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + default (ARCH_GEMINI || ARCH_MOXART) + help + Support for common GPIOs from the Faraday FTGPIO010 IP core, found in + Cortina systems Gemini platforms, Moxa ART and others. + +config GPIO_GENERIC_PLATFORM + tristate "Generic memory-mapped GPIO controller support (MMIO platform device)" + select GPIO_GENERIC + help + Say yes here to support basic platform_device memory-mapped GPIO controllers. + +config GPIO_GRGPIO + tristate "Aeroflex Gaisler GRGPIO support" + depends on OF_GPIO + select GPIO_GENERIC + select IRQ_DOMAIN + help + Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB + VHDL IP core library. + +config GPIO_HLWD + tristate "Nintendo Wii (Hollywood) GPIO" + depends on OF_GPIO + select GPIO_GENERIC + help + Select this to support the GPIO controller of the Nintendo Wii. + + If unsure, say N. + +config GPIO_ICH + tristate "Intel ICH GPIO" + depends on PCI && X86 + select MFD_CORE + select LPC_ICH + help + Say yes here to support the GPIO functionality of a number of Intel + ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8 + ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg + Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake). + + If unsure, say N. + +config GPIO_INGENIC + tristate "Ingenic JZ47xx SoCs GPIO support" + depends on OF + depends on MACH_INGENIC || COMPILE_TEST + select GPIOLIB_IRQCHIP + help + Say yes here to support the GPIO functionality present on the + JZ4740 and JZ4780 SoCs from Ingenic. + + If unsure, say N. + +config GPIO_IOP + tristate "Intel IOP GPIO" + depends on ARCH_IOP32X || ARCH_IOP33X || COMPILE_TEST + select GPIO_GENERIC + help + Say yes here to support the GPIO functionality of a number of Intel + IOP32X or IOP33X. + + If unsure, say N. + +config GPIO_LOONGSON + bool "Loongson-2/3 GPIO support" + depends on CPU_LOONGSON2 || CPU_LOONGSON3 + help + driver for GPIO functionality on Loongson-2F/3A/3B processors. + +config GPIO_LPC18XX + tristate "NXP LPC18XX/43XX GPIO support" + default y if ARCH_LPC18XX + depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST) + help + Select this option to enable GPIO driver for + NXP LPC18XX/43XX devices. + +config GPIO_LYNXPOINT + tristate "Intel Lynxpoint GPIO support" + depends on ACPI && X86 + select GPIOLIB_IRQCHIP + help + driver for GPIO functionality on Intel Lynxpoint PCH chipset + Requires ACPI device enumeration code to set up a platform device. + +config GPIO_MB86S7X + tristate "GPIO support for Fujitsu MB86S7x Platforms" + help + Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs. + +config GPIO_MENZ127 + tristate "MEN 16Z127 GPIO support" + depends on MCB + select GPIO_GENERIC + help + Say yes here to support the MEN 16Z127 GPIO Controller + +config GPIO_MM_LANTIQ + bool "Lantiq Memory mapped GPIOs" + depends on LANTIQ && SOC_XWAY + help + This enables support for memory mapped GPIOs on the External Bus Unit + (EBU) found on Lantiq SoCs. The gpios are output only as they are + created by attaching a 16bit latch to the bus. + +config GPIO_MOCKUP + tristate "GPIO Testing Driver" + depends on GPIOLIB && SYSFS + select GPIO_SYSFS + select GPIOLIB_IRQCHIP + select IRQ_SIM + help + This enables GPIO Testing driver, which provides a way to test GPIO + subsystem through sysfs(or char device) and debugfs. GPIO_SYSFS + must be selected for this test. + User could use it through the script in + tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in + it. + +config GPIO_MPC5200 + def_bool y + depends on PPC_MPC52xx + +config GPIO_MPC8XXX + bool "MPC512x/MPC8xxx/QorIQ GPIO support" + depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \ + FSL_SOC_BOOKE || PPC_86xx || ARCH_LAYERSCAPE || ARM || \ + COMPILE_TEST + select GPIO_GENERIC + select IRQ_DOMAIN + help + Say Y here if you're going to use hardware that connects to the + MPC512x/831x/834x/837x/8572/8610/QorIQ GPIOs. + +config GPIO_MT7621 + bool "Mediatek MT7621 GPIO Support" + depends on SOC_MT7620 || SOC_MT7621 || COMPILE_TEST + depends on OF_GPIO + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help + Say yes here to support the Mediatek MT7621 SoC GPIO device + +config GPIO_MVEBU + def_bool y + depends on PLAT_ORION || ARCH_MVEBU + depends on OF_GPIO + select GENERIC_IRQ_CHIP + select REGMAP_MMIO + +config GPIO_MXC + def_bool y + depends on ARCH_MXC + select GPIO_GENERIC + select GENERIC_IRQ_CHIP + +config GPIO_MXS + def_bool y + depends on ARCH_MXS + select GPIO_GENERIC + select GENERIC_IRQ_CHIP + +config GPIO_OCTEON + tristate "Cavium OCTEON GPIO" + depends on GPIOLIB && CAVIUM_OCTEON_SOC + default y + help + Say yes here to support the on-chip GPIO lines on the OCTEON + family of SOCs. + +config GPIO_OMAP + tristate "TI OMAP GPIO support" if ARCH_OMAP2PLUS || COMPILE_TEST + default y if ARCH_OMAP + depends on ARM + select GENERIC_IRQ_CHIP + select GPIOLIB_IRQCHIP + help + Say yes here to enable GPIO support for TI OMAP SoCs. + +config GPIO_PL061 + bool "PrimeCell PL061 GPIO support" + depends on ARM_AMBA + select IRQ_DOMAIN + select GPIOLIB_IRQCHIP + help + Say yes here to support the PrimeCell PL061 GPIO device + +config GPIO_PMIC_EIC_SPRD + tristate "Spreadtrum PMIC EIC support" + depends on MFD_SC27XX_PMIC || COMPILE_TEST + depends on OF_GPIO + select GPIOLIB_IRQCHIP + help + Say yes here to support Spreadtrum PMIC EIC device. + +config GPIO_PXA + bool "PXA GPIO support" + depends on ARCH_PXA || ARCH_MMP + help + Say yes here to support the PXA GPIO device + +config GPIO_RCAR + tristate "Renesas R-Car GPIO" + depends on ARCH_RENESAS || COMPILE_TEST + select GPIOLIB_IRQCHIP + help + Say yes here to support GPIO on Renesas R-Car SoCs. + +config GPIO_REG + bool + help + A 32-bit single register GPIO fixed in/out implementation. This + can be used to represent any register as a set of GPIO signals. + +config GPIO_SPEAR_SPICS + bool "ST SPEAr13xx SPI Chip Select as GPIO support" + depends on PLAT_SPEAR + select GENERIC_IRQ_CHIP + help + Say yes here to support ST SPEAr SPI Chip Select as GPIO device + +config GPIO_SPRD + tristate "Spreadtrum GPIO support" + depends on ARCH_SPRD || COMPILE_TEST + depends on OF_GPIO + select GPIOLIB_IRQCHIP + help + Say yes here to support Spreadtrum GPIO device. + +config GPIO_STA2X11 + bool "STA2x11/ConneXt GPIO support" + depends on MFD_STA2X11 + select GENERIC_IRQ_CHIP + help + Say yes here to support the STA2x11/ConneXt GPIO device. + The GPIO module has 128 GPIO pins with alternate functions. + +config GPIO_STP_XWAY + bool "XWAY STP GPIOs" + depends on SOC_XWAY + help + This enables support for the Serial To Parallel (STP) unit found on + XWAY SoC. The STP allows the SoC to drive a shift registers cascade, + that can be up to 24 bit. This peripheral is aimed at driving leds. + Some of the gpios/leds can be auto updated by the soc with dsl and + phy status. + +config GPIO_SYSCON + tristate "GPIO based on SYSCON" + depends on MFD_SYSCON && OF + help + Say yes here to support GPIO functionality though SYSCON driver. + +config GPIO_TB10X + bool + select GENERIC_IRQ_CHIP + select OF_GPIO + +config GPIO_TEGRA + bool "NVIDIA Tegra GPIO support" + default ARCH_TEGRA + depends on ARCH_TEGRA || COMPILE_TEST + depends on OF_GPIO + help + Say yes here to support GPIO pins on NVIDIA Tegra SoCs. + +config GPIO_TEGRA186 + tristate "NVIDIA Tegra186 GPIO support" + default ARCH_TEGRA_186_SOC + depends on ARCH_TEGRA_186_SOC || COMPILE_TEST + depends on OF_GPIO + select GPIOLIB_IRQCHIP + help + Say yes here to support GPIO pins on NVIDIA Tegra186 SoCs. + +config GPIO_TS4800 + tristate "TS-4800 DIO blocks and compatibles" + depends on OF_GPIO + depends on SOC_IMX51 || COMPILE_TEST + select GPIO_GENERIC + help + This driver support TS-4800 FPGA GPIO controllers. + +config GPIO_THUNDERX + tristate "Cavium ThunderX/OCTEON-TX GPIO" + depends on ARCH_THUNDER || (64BIT && COMPILE_TEST) + depends on PCI_MSI + select IRQ_DOMAIN_HIERARCHY + select IRQ_FASTEOI_HIERARCHY_HANDLERS + help + Say yes here to support the on-chip GPIO lines on the ThunderX + and OCTEON-TX families of SoCs. + +config GPIO_UNIPHIER + tristate "UniPhier GPIO support" + depends on ARCH_UNIPHIER || COMPILE_TEST + depends on OF_GPIO + select IRQ_DOMAIN_HIERARCHY + help + Say yes here to support UniPhier GPIOs. + +config GPIO_VF610 + def_bool y + depends on ARCH_MXC && SOC_VF610 + select GPIOLIB_IRQCHIP + help + Say yes here to support Vybrid vf610 GPIOs. + +config GPIO_VR41XX + tristate "NEC VR4100 series General-purpose I/O Uint support" + depends on CPU_VR41XX + help + Say yes here to support the NEC VR4100 series General-purpose I/O Uint + +config GPIO_VX855 + tristate "VIA VX855/VX875 GPIO" + depends on (X86 || COMPILE_TEST) && PCI + select MFD_CORE + select MFD_VX855 + help + Support access to the VX855/VX875 GPIO lines through the gpio library. + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + +config GPIO_XGENE + bool "APM X-Gene GPIO controller support" + depends on ARM64 && OF_GPIO + help + This driver is to support the GPIO block within the APM X-Gene SoC + platform's generic flash controller. The GPIO pins are muxed with + the generic flash controller's address and data pins. Say yes + here to enable the GFC GPIO functionality. + +config GPIO_XGENE_SB + tristate "APM X-Gene GPIO standby controller support" + depends on ARCH_XGENE && OF_GPIO + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + select IRQ_DOMAIN_HIERARCHY + help + This driver supports the GPIO block within the APM X-Gene + Standby Domain. Say yes here to enable the GPIO functionality. + +config GPIO_XILINX + tristate "Xilinx GPIO support" + depends on OF_GPIO + help + Say yes here to support the Xilinx FPGA GPIO device + +config GPIO_XLP + tristate "Netlogic XLP GPIO support" + depends on OF_GPIO && (CPU_XLP || ARCH_THUNDER2 || COMPILE_TEST) + select GPIOLIB_IRQCHIP + help + This driver provides support for GPIO interface on Netlogic XLP MIPS64 + SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, + XLP9XX and XLP5XX. The same GPIO controller block is also present in + Cavium's ThunderX2 CN99XX SoCs. + + If unsure, say N. + +config GPIO_XTENSA + bool "Xtensa GPIO32 support" + depends on XTENSA + depends on HAVE_XTENSA_GPIO32 + depends on !SMP + help + Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input) + and EXPSTATE (output) ports + +config GPIO_ZEVIO + bool "LSI ZEVIO SoC memory mapped GPIOs" + depends on ARM && OF_GPIO + help + Say yes here to support the GPIO controller in LSI ZEVIO SoCs. + +config GPIO_ZYNQ + tristate "Xilinx Zynq GPIO support" + depends on ARCH_ZYNQ || ARCH_ZYNQMP + select GPIOLIB_IRQCHIP + help + Say yes here to support Xilinx Zynq GPIO controller. + +config GPIO_ZX + bool "ZTE ZX GPIO support" + depends on ARCH_ZX || COMPILE_TEST + select GPIOLIB_IRQCHIP + help + Say yes here to support the GPIO device on ZTE ZX SoCs. + +config GPIO_LOONGSON1 + tristate "Loongson1 GPIO support" + depends on MACH_LOONGSON32 + select GPIO_GENERIC + help + Say Y or M here to support GPIO on Loongson1 SoCs. + +endmenu + +menu "Port-mapped I/O GPIO drivers" + depends on X86 # Unconditional I/O space access + +config GPIO_104_DIO_48E + tristate "ACCES 104-DIO-48E GPIO support" + depends on PC104 + select ISA_BUS_API + select GPIOLIB_IRQCHIP + help + Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E, + 104-DIO-24E). The base port addresses for the devices may be + configured via the base module parameter. The interrupt line numbers + for the devices may be configured via the irq module parameter. + +config GPIO_104_IDIO_16 + tristate "ACCES 104-IDIO-16 GPIO support" + depends on PC104 + select ISA_BUS_API + select GPIOLIB_IRQCHIP + help + Enables GPIO support for the ACCES 104-IDIO-16 family (104-IDIO-16, + 104-IDIO-16E, 104-IDO-16, 104-IDIO-8, 104-IDIO-8E, 104-IDO-8). The + base port addresses for the devices may be configured via the base + module parameter. The interrupt line numbers for the devices may be + configured via the irq module parameter. + +config GPIO_104_IDI_48 + tristate "ACCES 104-IDI-48 GPIO support" + depends on PC104 + select ISA_BUS_API + select GPIOLIB_IRQCHIP + help + Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A, + 104-IDI-48AC, 104-IDI-48B, 104-IDI-48BC). The base port addresses for + the devices may be configured via the base module parameter. The + interrupt line numbers for the devices may be configured via the irq + module parameter. + +config GPIO_F7188X + tristate "F71869, F71869A, F71882FG, F71889F and F81866 GPIO support" + help + This option enables support for GPIOs found on Fintek Super-I/O + chips F71869, F71869A, F71882FG, F71889F and F81866. + + To compile this driver as a module, choose M here: the module will + be called f7188x-gpio. + +config GPIO_GPIO_MM + tristate "Diamond Systems GPIO-MM GPIO support" + depends on PC104 + select ISA_BUS_API + help + Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12. + + The Diamond Systems GPIO-MM device features 48 lines of digital I/O + via the emulation of dual 82C55A PPI chips. This driver provides GPIO + support for these 48 channels of digital I/O. + + The base port addresses for the devices may be configured via the base + array module parameter. + +config GPIO_IT87 + tristate "IT87xx GPIO support" + help + Say yes here to support GPIO functionality of IT87xx Super I/O chips. + + This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and + supports the IT8761E, IT8613, IT8620E, and IT8628E Super I/O chips as + well. + + To compile this driver as a module, choose M here: the module will + be called gpio_it87 + +config GPIO_SCH + tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO" + depends on (X86 || COMPILE_TEST) && PCI + select MFD_CORE + select LPC_SCH + help + Say yes here to support GPIO interface on Intel Poulsbo SCH, + Intel Tunnel Creek processor, Intel Centerton processor or + Intel Quark X1000 SoC. + + The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are + powered by the core power rail and are turned off during sleep + modes (S3 and higher). The remaining four GPIOs are powered by + the Intel SCH suspend power supply. These GPIOs remain + active during S3. The suspend powered GPIOs can be used to wake the + system from the Suspend-to-RAM state. + + The Intel Tunnel Creek processor has 5 GPIOs powered by the + core power rail and 9 from suspend power supply. + + The Intel Centerton processor has a total of 30 GPIO pins. + Twenty-one are powered by the core power rail and 9 from the + suspend power supply. + + The Intel Quark X1000 SoC has 2 GPIOs powered by the core + power well and 6 from the suspend power well. + +config GPIO_SCH311X + tristate "SMSC SCH311x SuperI/O GPIO" + help + Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and + SCH3116 "Super I/O" chipsets. + + To compile this driver as a module, choose M here: the module will + be called gpio-sch311x. + +config GPIO_TS5500 + tristate "TS-5500 DIO blocks and compatibles" + depends on TS5500 || COMPILE_TEST + help + This driver supports Digital I/O exposed by pin blocks found on some + Technologic Systems platforms. It includes, but is not limited to, 3 + blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 + LCD port. + +config GPIO_WINBOND + tristate "Winbond Super I/O GPIO support" + select ISA_BUS_API + help + This option enables support for GPIOs found on Winbond Super I/O + chips. + Currently, only W83627UHG (also known as Nuvoton NCT6627UD) is + supported. + + You will need to provide a module parameter "gpios", or a + boot-time parameter "gpio_winbond.gpios" with a bitmask of GPIO + ports to enable (bit 0 is GPIO1, bit 1 is GPIO2, etc.). + + To compile this driver as a module, choose M here: the module will + be called gpio-winbond. + +config GPIO_WS16C48 + tristate "WinSystems WS16C48 GPIO support" + select ISA_BUS_API + select GPIOLIB_IRQCHIP + help + Enables GPIO support for the WinSystems WS16C48. The base port + addresses for the devices may be configured via the base module + parameter. The interrupt line numbers for the devices may be + configured via the irq module parameter. + +endmenu + +menu "I2C GPIO expanders" + depends on I2C + +config GPIO_ADP5588 + tristate "ADP5588 I2C GPIO expander" + help + This option enables support for 18 GPIOs found + on Analog Devices ADP5588 GPIO Expanders. + +config GPIO_ADP5588_IRQ + bool "Interrupt controller support for ADP5588" + depends on GPIO_ADP5588=y + select GPIOLIB_IRQCHIP + help + Say yes here to enable the adp5588 to be used as an interrupt + controller. It requires the driver to be built in the kernel. + +config GPIO_ADNP + tristate "Avionic Design N-bit GPIO expander" + depends on OF_GPIO + select GPIOLIB_IRQCHIP + help + This option enables support for N GPIOs found on Avionic Design + I2C GPIO expanders. The register space will be extended by powers + of two, so the controller will need to accommodate for that. For + example: if a controller provides 48 pins, 6 registers will be + enough to represent all pins, but the driver will assume a + register layout for 64 pins (8 registers). + +config GPIO_MAX7300 + tristate "Maxim MAX7300 GPIO expander" + select GPIO_MAX730X + help + GPIO driver for Maxim MAX7300 I2C-based GPIO expander. + +config GPIO_MAX732X + tristate "MAX7319, MAX7320-7327 I2C Port Expanders" + help + Say yes here to support the MAX7319, MAX7320-7327 series of I2C + Port Expanders. Each IO port on these chips has a fixed role of + Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain + Input and Output (designed by 'P'). The combinations are listed + below: + + 8 bits: max7319 (8I), max7320 (8O), max7321 (8P), + max7322 (4I4O), max7323 (4P4O) + + 16 bits: max7324 (8I8O), max7325 (8P8O), + max7326 (4I12O), max7327 (4P12O) + + Board setup code must specify the model to use, and the start + number for these GPIOs. + +config GPIO_MAX732X_IRQ + bool "Interrupt controller support for MAX732x" + depends on GPIO_MAX732X=y + select GPIOLIB_IRQCHIP + help + Say yes here to enable the max732x to be used as an interrupt + controller. It requires the driver to be built in the kernel. + +config GPIO_MC9S08DZ60 + bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions" + depends on I2C=y && MACH_MX35_3DS + help + Select this to enable the MC9S08DZ60 GPIO driver + +config GPIO_PCA953X + tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports" + help + Say yes here to provide access to several register-oriented + SMBus I/O expanders, made mostly by NXP or TI. Compatible + models include: + + 4 bits: pca9536, pca9537 + + 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, + pca9556, pca9557, pca9574, tca6408, tca9554, xra1202 + + 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, + tca6416 + + 24 bits: tca6424 + + 40 bits: pca9505, pca9698 + +config GPIO_PCA953X_IRQ + bool "Interrupt controller support for PCA953x" + depends on GPIO_PCA953X=y + select GPIOLIB_IRQCHIP + help + Say yes here to enable the pca953x to be used as an interrupt + controller. It requires the driver to be built in the kernel. + +config GPIO_PCF857X + tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders" + select GPIOLIB_IRQCHIP + select IRQ_DOMAIN + help + Say yes here to provide access to most "quasi-bidirectional" I2C + GPIO expanders used for additional digital outputs or inputs. + Most of these parts are from NXP, though TI is a second source for + some of them. Compatible models include: + + 8 bits: pcf8574, pcf8574a, pca8574, pca8574a, + pca9670, pca9672, pca9674, pca9674a, + max7328, max7329 + + 16 bits: pcf8575, pcf8575c, pca8575, + pca9671, pca9673, pca9675 + + Your board setup code will need to declare the expanders in + use, and assign numbers to the GPIOs they expose. Those GPIOs + can then be used from drivers and other kernel code, just like + other GPIOs, but only accessible from task contexts. + + This driver provides an in-kernel interface to those GPIOs using + platform-neutral GPIO calls. + +config GPIO_TPIC2810 + tristate "TPIC2810 8-Bit I2C GPO expander" + help + Say yes here to enable the GPO driver for the TI TPIC2810 chip. + + To compile this driver as a module, choose M here: the module will + be called gpio-tpic2810. + +config GPIO_TS4900 + tristate "Technologic Systems FPGA I2C GPIO" + depends on SOC_IMX6 || COMPILE_TEST + select REGMAP_I2C + help + Say yes here to enabled the GPIO driver for Technologic's FPGA core. + Series supported include TS-4100, TS-4900, TS-7970 and TS-7990. + +endmenu + +menu "MFD GPIO expanders" + +config GPIO_ADP5520 + tristate "GPIO Support for ADP5520 PMIC" + depends on PMIC_ADP5520 + help + This option enables support for on-chip GPIO found + on Analog Devices ADP5520 PMICs. + +config GPIO_ALTERA_A10SR + tristate "Altera Arria10 System Resource GPIO" + depends on MFD_ALTERA_A10SR + help + Driver for Arria10 Development Kit GPIO expansion which + includes reads of pushbuttons and DIP switches as well + as writes to LEDs. + +config GPIO_ARIZONA + tristate "Wolfson Microelectronics Arizona class devices" + depends on MFD_ARIZONA + help + Support for GPIOs on Wolfson Arizona class devices. + +config GPIO_BD9571MWV + tristate "ROHM BD9571 GPIO support" + depends on MFD_BD9571MWV + help + Support for GPIOs on ROHM BD9571 PMIC. There are two GPIOs + available on the ROHM PMIC in total, both of which can also + generate interrupts. + + This driver can also be built as a module. If so, the module + will be called gpio-bd9571mwv. + +config GPIO_CRYSTAL_COVE + tristate "GPIO support for Crystal Cove PMIC" + depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC + select GPIOLIB_IRQCHIP + help + Support for GPIO pins on Crystal Cove PMIC. + + Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC + inside. + + This driver can also be built as a module. If so, the module will be + called gpio-crystalcove. + +config GPIO_CS5535 + tristate "AMD CS5535/CS5536 GPIO support" + depends on X86 || MIPS || COMPILE_TEST + depends on MFD_CS5535 + help + The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that + can be used for quite a number of things. The CS5535/6 is found on + AMD Geode and Lemote Yeeloong devices. + + If unsure, say N. + +config GPIO_DA9052 + tristate "Dialog DA9052 GPIO" + depends on PMIC_DA9052 + help + Say yes here to enable the GPIO driver for the DA9052 chip. + +config GPIO_DA9055 + tristate "Dialog Semiconductor DA9055 GPIO" + depends on MFD_DA9055 + help + Say yes here to enable the GPIO driver for the DA9055 chip. + + The Dialog DA9055 PMIC chip has 3 GPIO pins that can be + be controller by this driver. + + If driver is built as a module it will be called gpio-da9055. + +config GPIO_DLN2 + tristate "Diolan DLN2 GPIO support" + depends on MFD_DLN2 + select GPIOLIB_IRQCHIP + + help + Select this option to enable GPIO driver for the Diolan DLN2 + board. + + This driver can also be built as a module. If so, the module + will be called gpio-dln2. + +config HTC_EGPIO + bool "HTC EGPIO support" + depends on GPIOLIB && ARM + help + This driver supports the CPLD egpio chip present on + several HTC phones. It provides basic support for input + pins, output pins, and irqs. + +config GPIO_JANZ_TTL + tristate "Janz VMOD-TTL Digital IO Module" + depends on MFD_JANZ_CMODIO + help + This enables support for the Janz VMOD-TTL Digital IO module. + This driver provides support for driving the pins in output + mode only. Input mode is not supported. + +config GPIO_KEMPLD + tristate "Kontron ETX / COMexpress GPIO" + depends on MFD_KEMPLD + help + This enables support for the PLD GPIO interface on some Kontron ETX + and COMexpress (ETXexpress) modules. + + This driver can also be built as a module. If so, the module will be + called gpio-kempld. + +config GPIO_LP3943 + tristate "TI/National Semiconductor LP3943 GPIO expander" + depends on MFD_LP3943 + help + GPIO driver for LP3943 MFD. + LP3943 can be used as a GPIO expander which provides up to 16 GPIOs. + Open drain outputs are required for this usage. + +config GPIO_LP873X + tristate "TI LP873X GPO" + depends on MFD_TI_LP873X + help + This driver supports the GPO on TI Lp873x PMICs. 2 GPOs are present + on LP873X PMICs. + + This driver can also be built as a module. If so, the module will be + called gpio-lp873x. + +config GPIO_LP87565 + tristate "TI LP87565 GPIO" + depends on MFD_TI_LP87565 + help + This driver supports the GPIO on TI Lp873565 PMICs. 3 GPIOs are present + on LP87565 PMICs. + + This driver can also be built as a module. If so, the module will be + called gpio-lp87565. + +config GPIO_MADERA + tristate "Cirrus Logic Madera class codecs" + depends on PINCTRL_MADERA + help + Support for GPIOs on Cirrus Logic Madera class codecs. + +config GPIO_MAX77620 + tristate "GPIO support for PMIC MAX77620 and MAX20024" + depends on MFD_MAX77620 + select GPIOLIB_IRQCHIP + help + GPIO driver for MAX77620 and MAX20024 PMIC from Maxim Semiconductor. + MAX77620 PMIC has 8 pins that can be configured as GPIOs. The + driver also provides interrupt support for each of the gpios. + Say yes here to enable the max77620 to be used as gpio controller. + +config GPIO_MSIC + bool "Intel MSIC mixed signal gpio support" + depends on (X86 || COMPILE_TEST) && MFD_INTEL_MSIC + help + Enable support for GPIO on intel MSIC controllers found in + intel MID devices + +config GPIO_PALMAS + bool "TI PALMAS series PMICs GPIO" + depends on MFD_PALMAS + help + Select this option to enable GPIO driver for the TI PALMAS + series chip family. + +config GPIO_RC5T583 + bool "RICOH RC5T583 GPIO" + depends on MFD_RC5T583 + help + Select this option to enable GPIO driver for the Ricoh RC5T583 + chip family. + This driver provides the support for driving/reading the gpio pins + of RC5T583 device through standard gpio library. + +config GPIO_STMPE + bool "STMPE GPIOs" + depends on MFD_STMPE + depends on OF_GPIO + select GPIOLIB_IRQCHIP + help + This enables support for the GPIOs found on the STMPE I/O + Expanders. + +config GPIO_TC3589X + bool "TC3589X GPIOs" + depends on MFD_TC3589X + depends on OF_GPIO + select GPIOLIB_IRQCHIP + help + This enables support for the GPIOs found on the TC3589X + I/O Expander. + +config GPIO_TIMBERDALE + bool "Support for timberdale GPIO IP" + depends on MFD_TIMBERDALE + ---help--- + Add support for the GPIO IP in the timberdale FPGA. + +config GPIO_TPS65086 + tristate "TI TPS65086 GPO" + depends on MFD_TPS65086 + help + This driver supports the GPO on TI TPS65086x PMICs. + +config GPIO_TPS65218 + tristate "TPS65218 GPIO" + depends on MFD_TPS65218 + help + Select this option to enable GPIO driver for the TPS65218 + chip family. + +config GPIO_TPS6586X + bool "TPS6586X GPIO" + depends on MFD_TPS6586X + help + Select this option to enable GPIO driver for the TPS6586X + chip family. + +config GPIO_TPS65910 + bool "TPS65910 GPIO" + depends on MFD_TPS65910 + help + Select this option to enable GPIO driver for the TPS65910 + chip family. + +config GPIO_TPS65912 + tristate "TI TPS65912 GPIO" + depends on MFD_TPS65912 + help + This driver supports TPS65912 gpio chip + +config GPIO_TPS68470 + bool "TPS68470 GPIO" + depends on MFD_TPS68470 + help + Select this option to enable GPIO driver for the TPS68470 + chip family. + There are 7 GPIOs and few sensor related GPIOs supported + by the TPS68470. While the 7 GPIOs can be configured as + input or output as appropriate, the sensor related GPIOs + are "output only" GPIOs. + + This driver config is bool, as the GPIO functionality + of the TPS68470 must be available before dependent + drivers are loaded. + +config GPIO_TWL4030 + tristate "TWL4030, TWL5030, and TPS659x0 GPIOs" + depends on TWL4030_CORE + help + Say yes here to access the GPIO signals of various multi-function + power management chips from Texas Instruments. + +config GPIO_TWL6040 + tristate "TWL6040 GPO" + depends on TWL6040_CORE + help + Say yes here to access the GPO signals of twl6040 + audio chip from Texas Instruments. + +config GPIO_UCB1400 + tristate "Philips UCB1400 GPIO" + depends on UCB1400_CORE + help + This enables support for the Philips UCB1400 GPIO pins. + The UCB1400 is an AC97 audio codec. + +config GPIO_WHISKEY_COVE + tristate "GPIO support for Whiskey Cove PMIC" + depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC_BXTWC + select GPIOLIB_IRQCHIP + help + Support for GPIO pins on Whiskey Cove PMIC. + + Say Yes if you have a Intel SoC based tablet with Whiskey Cove PMIC + inside. + + This driver can also be built as a module. If so, the module will be + called gpio-wcove. + +config GPIO_WM831X + tristate "WM831x GPIOs" + depends on MFD_WM831X + help + Say yes here to access the GPIO signals of WM831x power management + chips from Wolfson Microelectronics. + +config GPIO_WM8350 + tristate "WM8350 GPIOs" + depends on MFD_WM8350 + help + Say yes here to access the GPIO signals of WM8350 power management + chips from Wolfson Microelectronics. + +config GPIO_WM8994 + tristate "WM8994 GPIOs" + depends on MFD_WM8994 + help + Say yes here to access the GPIO signals of WM8994 audio hub + CODECs from Wolfson Microelectronics. + +endmenu + +menu "PCI GPIO expanders" + depends on PCI + +config GPIO_AMD8111 + tristate "AMD 8111 GPIO driver" + depends on X86 || COMPILE_TEST + help + The AMD 8111 south bridge contains 32 GPIO pins which can be used. + + Note, that usually system firmware/ACPI handles GPIO pins on their + own and users might easily break their systems with uncarefull usage + of this driver! + + If unsure, say N + +config GPIO_BT8XX + tristate "BT8XX GPIO abuser" + depends on VIDEO_BT848=n + help + The BT8xx frame grabber chip has 24 GPIO pins that can be abused + as a cheap PCI GPIO card. + + This chip can be found on Miro, Hauppauge and STB TV-cards. + + The card needs to be physically altered for using it as a + GPIO card. For more information on how to build a GPIO card + from a BT8xx TV card, see the documentation file at + Documentation/bt8xxgpio.txt + + If unsure, say N. + +config GPIO_INTEL_MID + bool "Intel MID GPIO support" + depends on X86_INTEL_MID + select GPIOLIB_IRQCHIP + help + Say Y here to support Intel MID GPIO. + +config GPIO_MERRIFIELD + tristate "Intel Merrifield GPIO support" + depends on X86_INTEL_MID + select GPIOLIB_IRQCHIP + help + Say Y here to support Intel Merrifield GPIO. + +config GPIO_ML_IOH + tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" + depends on X86 || COMPILE_TEST + select GENERIC_IRQ_CHIP + help + ML7213 is companion chip for Intel Atom E6xx series. + This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output + Hub) which is for IVI(In-Vehicle Infotainment) use. + This driver can access the IOH's GPIO device. + +config GPIO_PCH + tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO" + depends on X86_32 || MIPS || COMPILE_TEST + select GENERIC_IRQ_CHIP + help + This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff + which is an IOH(Input/Output Hub) for x86 embedded processor. + This driver can access PCH GPIO device. + + This driver also can be used for LAPIS Semiconductor IOH(Input/ + Output Hub), ML7223 and ML7831. + ML7223 IOH is for MP(Media Phone) use. + ML7831 IOH is for general purpose use. + ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7223/ML7831 is completely compatible for Intel EG20T PCH. + +config GPIO_PCI_IDIO_16 + tristate "ACCES PCI-IDIO-16 GPIO support" + select GPIOLIB_IRQCHIP + help + Enables GPIO support for the ACCES PCI-IDIO-16. An interrupt is + generated when any of the inputs change state (low to high or high to + low). Input filter control is not supported by this driver, and the + input filters are deactivated by this driver. + +config GPIO_PCIE_IDIO_24 + tristate "ACCES PCIe-IDIO-24 GPIO support" + select GPIOLIB_IRQCHIP + help + Enables GPIO support for the ACCES PCIe-IDIO-24 family (PCIe-IDIO-24, + PCIe-IDI-24, PCIe-IDO-24, PCIe-IDIO-12). An interrupt is generated + when any of the inputs change state (low to high or high to low). + Input filter control is not supported by this driver, and the input + filters are deactivated by this driver. + +config GPIO_RDC321X + tristate "RDC R-321x GPIO support" + select MFD_CORE + select MFD_RDC321X + help + Support for the RDC R321x SoC GPIOs over southbridge + PCI configuration space. + +config GPIO_SODAVILLE + bool "Intel Sodaville GPIO support" + depends on X86 && OF + select GPIO_GENERIC + select GENERIC_IRQ_CHIP + help + Say Y here to support Intel Sodaville GPIO. + +endmenu + +menu "SPI GPIO expanders" + depends on SPI_MASTER + +config GPIO_74X164 + tristate "74x164 serial-in/parallel-out 8-bits shift register" + depends on OF_GPIO + help + Driver for 74x164 compatible serial-in/parallel-out 8-outputs + shift registers. This driver can be used to provide access + to more gpio outputs. + +config GPIO_MAX3191X + tristate "Maxim MAX3191x industrial serializer" + select CRC8 + help + GPIO driver for Maxim MAX31910, MAX31911, MAX31912, MAX31913, + MAX31953 and MAX31963 industrial serializer, a daisy-chainable + chip to make 8 digital 24V inputs available via SPI. Supports + CRC checksums to guard against electromagnetic interference, + as well as undervoltage and overtemperature detection. + +config GPIO_MAX7301 + tristate "Maxim MAX7301 GPIO expander" + select GPIO_MAX730X + help + GPIO driver for Maxim MAX7301 SPI-based GPIO expander. + +config GPIO_MC33880 + tristate "Freescale MC33880 high-side/low-side switch" + help + SPI driver for Freescale MC33880 high-side/low-side switch. + This provides GPIO interface supporting inputs and outputs. + +config GPIO_PISOSR + tristate "Generic parallel-in/serial-out shift register" + help + GPIO driver for SPI compatible parallel-in/serial-out shift + registers. These are input only devices. + +config GPIO_XRA1403 + tristate "EXAR XRA1403 16-bit GPIO expander" + select REGMAP_SPI + help + GPIO driver for EXAR XRA1403 16-bit SPI-based GPIO expander. + +endmenu + +menu "USB GPIO expanders" + depends on USB + +config GPIO_VIPERBOARD + tristate "Viperboard GPIO a & b support" + depends on MFD_VIPERBOARD + help + Say yes here to access the GPIO signals of Nano River + Technologies Viperboard. There are two GPIO chips on the + board: gpioa and gpiob. + See viperboard API specification and Nano + River Tech's viperboard.h for detailed meaning + of the module parameters. + +endmenu + +endif diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile new file mode 100644 index 000000000..c256aff66 --- /dev/null +++ b/drivers/gpio/Makefile @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: GPL-2.0 +# generic gpio support: platform drivers, dedicated expander chips, etc + +ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG + +obj-$(CONFIG_GPIOLIB) += devres.o +obj-$(CONFIG_GPIOLIB) += gpiolib.o +obj-$(CONFIG_GPIOLIB) += gpiolib-legacy.o +obj-$(CONFIG_GPIOLIB) += gpiolib-devprop.o +obj-$(CONFIG_OF_GPIO) += gpiolib-of.o +obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o +obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o + +# Device drivers. Generally keep list sorted alphabetically +obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o + +# directly supported by gpio-generic +gpio-generic-$(CONFIG_GPIO_GENERIC) += gpio-mmio.o + +obj-$(CONFIG_GPIO_104_DIO_48E) += gpio-104-dio-48e.o +obj-$(CONFIG_GPIO_104_IDIO_16) += gpio-104-idio-16.o +obj-$(CONFIG_GPIO_104_IDI_48) += gpio-104-idi-48.o +obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o +obj-$(CONFIG_GPIO_74XX_MMIO) += gpio-74xx-mmio.o +obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o +obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o +obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o +obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o +obj-$(CONFIG_GPIO_ALTERA_A10SR) += gpio-altera-a10sr.o +obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o +obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o +obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o +obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o +obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o +obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o +obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o +obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o +obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o +obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o +obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o +obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o +obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o +obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o +obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o +obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o +obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o +obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o +obj-$(CONFIG_GPIO_EIC_SPRD) += gpio-eic-sprd.o +obj-$(CONFIG_GPIO_EM) += gpio-em.o +obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o +obj-$(CONFIG_GPIO_EXAR) += gpio-exar.o +obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o +obj-$(CONFIG_GPIO_FTGPIO010) += gpio-ftgpio010.o +obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o +obj-$(CONFIG_GPIO_GPIO_MM) += gpio-gpio-mm.o +obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o +obj-$(CONFIG_GPIO_HLWD) += gpio-hlwd.o +obj-$(CONFIG_HTC_EGPIO) += gpio-htc-egpio.o +obj-$(CONFIG_GPIO_ICH) += gpio-ich.o +obj-$(CONFIG_GPIO_INGENIC) += gpio-ingenic.o +obj-$(CONFIG_GPIO_IOP) += gpio-iop.o +obj-$(CONFIG_GPIO_IT87) += gpio-it87.o +obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o +obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o +obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o +obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o +obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o +obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o +obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o +obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o +obj-$(CONFIG_GPIO_LP873X) += gpio-lp873x.o +obj-$(CONFIG_GPIO_LP87565) += gpio-lp87565.o +obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o +obj-$(CONFIG_GPIO_MADERA) += gpio-madera.o +obj-$(CONFIG_GPIO_MAX3191X) += gpio-max3191x.o +obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o +obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o +obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o +obj-$(CONFIG_GPIO_MAX732X) += gpio-max732x.o +obj-$(CONFIG_GPIO_MAX77620) += gpio-max77620.o +obj-$(CONFIG_GPIO_MB86S7X) += gpio-mb86s7x.o +obj-$(CONFIG_GPIO_MENZ127) += gpio-menz127.o +obj-$(CONFIG_GPIO_MERRIFIELD) += gpio-merrifield.o +obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o +obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o +obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o +obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o +obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o +obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o +obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o +obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o +obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o +obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o +obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o +obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o +obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o +obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o +obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o +obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o +obj-$(CONFIG_GPIO_PCH) += gpio-pch.o +obj-$(CONFIG_GPIO_PCI_IDIO_16) += gpio-pci-idio-16.o +obj-$(CONFIG_GPIO_PCIE_IDIO_24) += gpio-pcie-idio-24.o +obj-$(CONFIG_GPIO_PISOSR) += gpio-pisosr.o +obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o +obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o +obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o +obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o +obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o +obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o +obj-$(CONFIG_GPIO_REG) += gpio-reg.o +obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o +obj-$(CONFIG_GPIO_SCH) += gpio-sch.o +obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o +obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o +obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o +obj-$(CONFIG_GPIO_SPRD) += gpio-sprd.o +obj-$(CONFIG_GPIO_STA2X11) += gpio-sta2x11.o +obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o +obj-$(CONFIG_GPIO_STP_XWAY) += gpio-stp-xway.o +obj-$(CONFIG_GPIO_SYSCON) += gpio-syscon.o +obj-$(CONFIG_GPIO_TB10X) += gpio-tb10x.o +obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o +obj-$(CONFIG_GPIO_TEGRA) += gpio-tegra.o +obj-$(CONFIG_GPIO_TEGRA186) += gpio-tegra186.o +obj-$(CONFIG_GPIO_THUNDERX) += gpio-thunderx.o +obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o +obj-$(CONFIG_GPIO_PALMAS) += gpio-palmas.o +obj-$(CONFIG_GPIO_TPIC2810) += gpio-tpic2810.o +obj-$(CONFIG_GPIO_TPS65086) += gpio-tps65086.o +obj-$(CONFIG_GPIO_TPS65218) += gpio-tps65218.o +obj-$(CONFIG_GPIO_TPS6586X) += gpio-tps6586x.o +obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o +obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o +obj-$(CONFIG_GPIO_TPS68470) += gpio-tps68470.o +obj-$(CONFIG_GPIO_TS4800) += gpio-ts4800.o +obj-$(CONFIG_GPIO_TS4900) += gpio-ts4900.o +obj-$(CONFIG_GPIO_TS5500) += gpio-ts5500.o +obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o +obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o +obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o +obj-$(CONFIG_GPIO_UNIPHIER) += gpio-uniphier.o +obj-$(CONFIG_GPIO_VF610) += gpio-vf610.o +obj-$(CONFIG_GPIO_VIPERBOARD) += gpio-viperboard.o +obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o +obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o +obj-$(CONFIG_GPIO_WHISKEY_COVE) += gpio-wcove.o +obj-$(CONFIG_GPIO_WINBOND) += gpio-winbond.o +obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o +obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o +obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o +obj-$(CONFIG_GPIO_WS16C48) += gpio-ws16c48.o +obj-$(CONFIG_GPIO_XGENE) += gpio-xgene.o +obj-$(CONFIG_GPIO_XGENE_SB) += gpio-xgene-sb.o +obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o +obj-$(CONFIG_GPIO_XLP) += gpio-xlp.o +obj-$(CONFIG_GPIO_XRA1403) += gpio-xra1403.o +obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o +obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o +obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o +obj-$(CONFIG_GPIO_ZX) += gpio-zx.o +obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c new file mode 100644 index 000000000..e82cc7636 --- /dev/null +++ b/drivers/gpio/devres.c @@ -0,0 +1,447 @@ +/* + * drivers/gpio/devres.c - managed gpio resources + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This file is based on kernel/irq/devres.c + * + * Copyright (c) 2011 John Crispin <john@phrozen.org> + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/device.h> +#include <linux/gfp.h> + +#include "gpiolib.h" + +static void devm_gpiod_release(struct device *dev, void *res) +{ + struct gpio_desc **desc = res; + + gpiod_put(*desc); +} + +static int devm_gpiod_match(struct device *dev, void *res, void *data) +{ + struct gpio_desc **this = res, **gpio = data; + + return *this == *gpio; +} + +static void devm_gpiod_release_array(struct device *dev, void *res) +{ + struct gpio_descs **descs = res; + + gpiod_put_array(*descs); +} + +static int devm_gpiod_match_array(struct device *dev, void *res, void *data) +{ + struct gpio_descs **this = res, **gpios = data; + + return *this == *gpios; +} + +/** + * devm_gpiod_get - Resource-managed gpiod_get() + * @dev: GPIO consumer + * @con_id: function within the GPIO consumer + * @flags: optional GPIO initialization flags + * + * Managed gpiod_get(). GPIO descriptors returned from this function are + * automatically disposed on driver detach. See gpiod_get() for detailed + * information about behavior and return values. + */ +struct gpio_desc *__must_check devm_gpiod_get(struct device *dev, + const char *con_id, + enum gpiod_flags flags) +{ + return devm_gpiod_get_index(dev, con_id, 0, flags); +} +EXPORT_SYMBOL(devm_gpiod_get); + +/** + * devm_gpiod_get_optional - Resource-managed gpiod_get_optional() + * @dev: GPIO consumer + * @con_id: function within the GPIO consumer + * @flags: optional GPIO initialization flags + * + * Managed gpiod_get_optional(). GPIO descriptors returned from this function + * are automatically disposed on driver detach. See gpiod_get_optional() for + * detailed information about behavior and return values. + */ +struct gpio_desc *__must_check devm_gpiod_get_optional(struct device *dev, + const char *con_id, + enum gpiod_flags flags) +{ + return devm_gpiod_get_index_optional(dev, con_id, 0, flags); +} +EXPORT_SYMBOL(devm_gpiod_get_optional); + +/** + * devm_gpiod_get_index - Resource-managed gpiod_get_index() + * @dev: GPIO consumer + * @con_id: function within the GPIO consumer + * @idx: index of the GPIO to obtain in the consumer + * @flags: optional GPIO initialization flags + * + * Managed gpiod_get_index(). GPIO descriptors returned from this function are + * automatically disposed on driver detach. See gpiod_get_index() for detailed + * information about behavior and return values. + */ +struct gpio_desc *__must_check devm_gpiod_get_index(struct device *dev, + const char *con_id, + unsigned int idx, + enum gpiod_flags flags) +{ + struct gpio_desc **dr; + struct gpio_desc *desc; + + dr = devres_alloc(devm_gpiod_release, sizeof(struct gpio_desc *), + GFP_KERNEL); + if (!dr) + return ERR_PTR(-ENOMEM); + + desc = gpiod_get_index(dev, con_id, idx, flags); + if (IS_ERR(desc)) { + devres_free(dr); + return desc; + } + + *dr = desc; + devres_add(dev, dr); + + return desc; +} +EXPORT_SYMBOL(devm_gpiod_get_index); + +/** + * devm_gpiod_get_from_of_node() - obtain a GPIO from an OF node + * @dev: device for lifecycle management + * @node: handle of the OF node + * @propname: name of the DT property representing the GPIO + * @index: index of the GPIO to obtain for the consumer + * @dflags: GPIO initialization flags + * @label: label to attach to the requested GPIO + * + * Returns: + * On successful request the GPIO pin is configured in accordance with + * provided @dflags. + * + * In case of error an ERR_PTR() is returned. + */ +struct gpio_desc *devm_gpiod_get_from_of_node(struct device *dev, + struct device_node *node, + const char *propname, int index, + enum gpiod_flags dflags, + const char *label) +{ + struct gpio_desc **dr; + struct gpio_desc *desc; + + dr = devres_alloc(devm_gpiod_release, sizeof(struct gpio_desc *), + GFP_KERNEL); + if (!dr) + return ERR_PTR(-ENOMEM); + + desc = gpiod_get_from_of_node(node, propname, index, dflags, label); + if (IS_ERR(desc)) { + devres_free(dr); + return desc; + } + + *dr = desc; + devres_add(dev, dr); + + return desc; +} +EXPORT_SYMBOL(devm_gpiod_get_from_of_node); + +/** + * devm_fwnode_get_index_gpiod_from_child - get a GPIO descriptor from a + * device's child node + * @dev: GPIO consumer + * @con_id: function within the GPIO consumer + * @index: index of the GPIO to obtain in the consumer + * @child: firmware node (child of @dev) + * @flags: GPIO initialization flags + * @label: label to attach to the requested GPIO + * + * GPIO descriptors returned from this function are automatically disposed on + * driver detach. + * + * On successful request the GPIO pin is configured in accordance with + * provided @flags. + */ +struct gpio_desc *devm_fwnode_get_index_gpiod_from_child(struct device *dev, + const char *con_id, int index, + struct fwnode_handle *child, + enum gpiod_flags flags, + const char *label) +{ + char prop_name[32]; /* 32 is max size of property name */ + struct gpio_desc **dr; + struct gpio_desc *desc; + unsigned int i; + + dr = devres_alloc(devm_gpiod_release, sizeof(struct gpio_desc *), + GFP_KERNEL); + if (!dr) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) { + if (con_id) + snprintf(prop_name, sizeof(prop_name), "%s-%s", + con_id, gpio_suffixes[i]); + else + snprintf(prop_name, sizeof(prop_name), "%s", + gpio_suffixes[i]); + + desc = fwnode_get_named_gpiod(child, prop_name, index, flags, + label); + if (!IS_ERR(desc) || (PTR_ERR(desc) != -ENOENT)) + break; + } + if (IS_ERR(desc)) { + devres_free(dr); + return desc; + } + + *dr = desc; + devres_add(dev, dr); + + return desc; +} +EXPORT_SYMBOL(devm_fwnode_get_index_gpiod_from_child); + +/** + * devm_gpiod_get_index_optional - Resource-managed gpiod_get_index_optional() + * @dev: GPIO consumer + * @con_id: function within the GPIO consumer + * @index: index of the GPIO to obtain in the consumer + * @flags: optional GPIO initialization flags + * + * Managed gpiod_get_index_optional(). GPIO descriptors returned from this + * function are automatically disposed on driver detach. See + * gpiod_get_index_optional() for detailed information about behavior and + * return values. + */ +struct gpio_desc *__must_check devm_gpiod_get_index_optional(struct device *dev, + const char *con_id, + unsigned int index, + enum gpiod_flags flags) +{ + struct gpio_desc *desc; + + desc = devm_gpiod_get_index(dev, con_id, index, flags); + if (IS_ERR(desc)) { + if (PTR_ERR(desc) == -ENOENT) + return NULL; + } + + return desc; +} +EXPORT_SYMBOL(devm_gpiod_get_index_optional); + +/** + * devm_gpiod_get_array - Resource-managed gpiod_get_array() + * @dev: GPIO consumer + * @con_id: function within the GPIO consumer + * @flags: optional GPIO initialization flags + * + * Managed gpiod_get_array(). GPIO descriptors returned from this function are + * automatically disposed on driver detach. See gpiod_get_array() for detailed + * information about behavior and return values. + */ +struct gpio_descs *__must_check devm_gpiod_get_array(struct device *dev, + const char *con_id, + enum gpiod_flags flags) +{ + struct gpio_descs **dr; + struct gpio_descs *descs; + + dr = devres_alloc(devm_gpiod_release_array, + sizeof(struct gpio_descs *), GFP_KERNEL); + if (!dr) + return ERR_PTR(-ENOMEM); + + descs = gpiod_get_array(dev, con_id, flags); + if (IS_ERR(descs)) { + devres_free(dr); + return descs; + } + + *dr = descs; + devres_add(dev, dr); + + return descs; +} +EXPORT_SYMBOL(devm_gpiod_get_array); + +/** + * devm_gpiod_get_array_optional - Resource-managed gpiod_get_array_optional() + * @dev: GPIO consumer + * @con_id: function within the GPIO consumer + * @flags: optional GPIO initialization flags + * + * Managed gpiod_get_array_optional(). GPIO descriptors returned from this + * function are automatically disposed on driver detach. + * See gpiod_get_array_optional() for detailed information about behavior and + * return values. + */ +struct gpio_descs *__must_check +devm_gpiod_get_array_optional(struct device *dev, const char *con_id, + enum gpiod_flags flags) +{ + struct gpio_descs *descs; + + descs = devm_gpiod_get_array(dev, con_id, flags); + if (IS_ERR(descs) && (PTR_ERR(descs) == -ENOENT)) + return NULL; + + return descs; +} +EXPORT_SYMBOL(devm_gpiod_get_array_optional); + +/** + * devm_gpiod_put - Resource-managed gpiod_put() + * @dev: GPIO consumer + * @desc: GPIO descriptor to dispose of + * + * Dispose of a GPIO descriptor obtained with devm_gpiod_get() or + * devm_gpiod_get_index(). Normally this function will not be called as the GPIO + * will be disposed of by the resource management code. + */ +void devm_gpiod_put(struct device *dev, struct gpio_desc *desc) +{ + WARN_ON(devres_release(dev, devm_gpiod_release, devm_gpiod_match, + &desc)); +} +EXPORT_SYMBOL(devm_gpiod_put); + +/** + * devm_gpiod_put_array - Resource-managed gpiod_put_array() + * @dev: GPIO consumer + * @descs: GPIO descriptor array to dispose of + * + * Dispose of an array of GPIO descriptors obtained with devm_gpiod_get_array(). + * Normally this function will not be called as the GPIOs will be disposed of + * by the resource management code. + */ +void devm_gpiod_put_array(struct device *dev, struct gpio_descs *descs) +{ + WARN_ON(devres_release(dev, devm_gpiod_release_array, + devm_gpiod_match_array, &descs)); +} +EXPORT_SYMBOL(devm_gpiod_put_array); + + + + +static void devm_gpio_release(struct device *dev, void *res) +{ + unsigned *gpio = res; + + gpio_free(*gpio); +} + +static int devm_gpio_match(struct device *dev, void *res, void *data) +{ + unsigned *this = res, *gpio = data; + + return *this == *gpio; +} + +/** + * devm_gpio_request - request a GPIO for a managed device + * @dev: device to request the GPIO for + * @gpio: GPIO to allocate + * @label: the name of the requested GPIO + * + * Except for the extra @dev argument, this function takes the + * same arguments and performs the same function as + * gpio_request(). GPIOs requested with this function will be + * automatically freed on driver detach. + * + * If an GPIO allocated with this function needs to be freed + * separately, devm_gpio_free() must be used. + */ + +int devm_gpio_request(struct device *dev, unsigned gpio, const char *label) +{ + unsigned *dr; + int rc; + + dr = devres_alloc(devm_gpio_release, sizeof(unsigned), GFP_KERNEL); + if (!dr) + return -ENOMEM; + + rc = gpio_request(gpio, label); + if (rc) { + devres_free(dr); + return rc; + } + + *dr = gpio; + devres_add(dev, dr); + + return 0; +} +EXPORT_SYMBOL(devm_gpio_request); + +/** + * devm_gpio_request_one - request a single GPIO with initial setup + * @dev: device to request for + * @gpio: the GPIO number + * @flags: GPIO configuration as specified by GPIOF_* + * @label: a literal description string of this GPIO + */ +int devm_gpio_request_one(struct device *dev, unsigned gpio, + unsigned long flags, const char *label) +{ + unsigned *dr; + int rc; + + dr = devres_alloc(devm_gpio_release, sizeof(unsigned), GFP_KERNEL); + if (!dr) + return -ENOMEM; + + rc = gpio_request_one(gpio, flags, label); + if (rc) { + devres_free(dr); + return rc; + } + + *dr = gpio; + devres_add(dev, dr); + + return 0; +} +EXPORT_SYMBOL(devm_gpio_request_one); + +/** + * devm_gpio_free - free a GPIO + * @dev: device to free GPIO for + * @gpio: GPIO to free + * + * Except for the extra @dev argument, this function takes the + * same arguments and performs the same function as gpio_free(). + * This function instead of gpio_free() should be used to manually + * free GPIOs allocated with devm_gpio_request(). + */ +void devm_gpio_free(struct device *dev, unsigned int gpio) +{ + + WARN_ON(devres_release(dev, devm_gpio_release, devm_gpio_match, + &gpio)); +} +EXPORT_SYMBOL(devm_gpio_free); diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c new file mode 100644 index 000000000..9c4e07fcb --- /dev/null +++ b/drivers/gpio/gpio-104-dio-48e.c @@ -0,0 +1,488 @@ +/* + * GPIO driver for the ACCES 104-DIO-48E series + * Copyright (C) 2016 William Breathitt Gray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * This driver supports the following ACCES devices: 104-DIO-48E and + * 104-DIO-24E. + */ +#include <linux/bitmap.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/irqdesc.h> +#include <linux/isa.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> + +#define DIO48E_EXTENT 16 +#define MAX_NUM_DIO48E max_num_isa_dev(DIO48E_EXTENT) + +static unsigned int base[MAX_NUM_DIO48E]; +static unsigned int num_dio48e; +module_param_hw_array(base, uint, ioport, &num_dio48e, 0); +MODULE_PARM_DESC(base, "ACCES 104-DIO-48E base addresses"); + +static unsigned int irq[MAX_NUM_DIO48E]; +module_param_hw_array(irq, uint, irq, NULL, 0); +MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers"); + +/** + * struct dio48e_gpio - GPIO device private data structure + * @chip: instance of the gpio_chip + * @io_state: bit I/O state (whether bit is set to input or output) + * @out_state: output bits state + * @control: Control registers state + * @lock: synchronization lock to prevent I/O race conditions + * @base: base port address of the GPIO device + * @irq_mask: I/O bits affected by interrupts + */ +struct dio48e_gpio { + struct gpio_chip chip; + unsigned char io_state[6]; + unsigned char out_state[6]; + unsigned char control[2]; + raw_spinlock_t lock; + unsigned base; + unsigned char irq_mask; +}; + +static int dio48e_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip); + const unsigned port = offset / 8; + const unsigned mask = BIT(offset % 8); + + return !!(dio48egpio->io_state[port] & mask); +} + +static int dio48e_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip); + const unsigned io_port = offset / 8; + const unsigned int control_port = io_port / 3; + const unsigned control_addr = dio48egpio->base + 3 + control_port*4; + unsigned long flags; + unsigned control; + + raw_spin_lock_irqsave(&dio48egpio->lock, flags); + + /* Check if configuring Port C */ + if (io_port == 2 || io_port == 5) { + /* Port C can be configured by nibble */ + if (offset % 8 > 3) { + dio48egpio->io_state[io_port] |= 0xF0; + dio48egpio->control[control_port] |= BIT(3); + } else { + dio48egpio->io_state[io_port] |= 0x0F; + dio48egpio->control[control_port] |= BIT(0); + } + } else { + dio48egpio->io_state[io_port] |= 0xFF; + if (io_port == 0 || io_port == 3) + dio48egpio->control[control_port] |= BIT(4); + else + dio48egpio->control[control_port] |= BIT(1); + } + + control = BIT(7) | dio48egpio->control[control_port]; + outb(control, control_addr); + control &= ~BIT(7); + outb(control, control_addr); + + raw_spin_unlock_irqrestore(&dio48egpio->lock, flags); + + return 0; +} + +static int dio48e_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip); + const unsigned io_port = offset / 8; + const unsigned int control_port = io_port / 3; + const unsigned mask = BIT(offset % 8); + const unsigned control_addr = dio48egpio->base + 3 + control_port*4; + const unsigned out_port = (io_port > 2) ? io_port + 1 : io_port; + unsigned long flags; + unsigned control; + + raw_spin_lock_irqsave(&dio48egpio->lock, flags); + + /* Check if configuring Port C */ + if (io_port == 2 || io_port == 5) { + /* Port C can be configured by nibble */ + if (offset % 8 > 3) { + dio48egpio->io_state[io_port] &= 0x0F; + dio48egpio->control[control_port] &= ~BIT(3); + } else { + dio48egpio->io_state[io_port] &= 0xF0; + dio48egpio->control[control_port] &= ~BIT(0); + } + } else { + dio48egpio->io_state[io_port] &= 0x00; + if (io_port == 0 || io_port == 3) + dio48egpio->control[control_port] &= ~BIT(4); + else + dio48egpio->control[control_port] &= ~BIT(1); + } + + if (value) + dio48egpio->out_state[io_port] |= mask; + else + dio48egpio->out_state[io_port] &= ~mask; + + control = BIT(7) | dio48egpio->control[control_port]; + outb(control, control_addr); + + outb(dio48egpio->out_state[io_port], dio48egpio->base + out_port); + + control &= ~BIT(7); + outb(control, control_addr); + + raw_spin_unlock_irqrestore(&dio48egpio->lock, flags); + + return 0; +} + +static int dio48e_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip); + const unsigned port = offset / 8; + const unsigned mask = BIT(offset % 8); + const unsigned in_port = (port > 2) ? port + 1 : port; + unsigned long flags; + unsigned port_state; + + raw_spin_lock_irqsave(&dio48egpio->lock, flags); + + /* ensure that GPIO is set for input */ + if (!(dio48egpio->io_state[port] & mask)) { + raw_spin_unlock_irqrestore(&dio48egpio->lock, flags); + return -EINVAL; + } + + port_state = inb(dio48egpio->base + in_port); + + raw_spin_unlock_irqrestore(&dio48egpio->lock, flags); + + return !!(port_state & mask); +} + +static int dio48e_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, + unsigned long *bits) +{ + struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip); + size_t i; + static const size_t ports[] = { 0, 1, 2, 4, 5, 6 }; + const unsigned int gpio_reg_size = 8; + unsigned int bits_offset; + size_t word_index; + unsigned int word_offset; + unsigned long word_mask; + const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0); + unsigned long port_state; + + /* clear bits array to a clean slate */ + bitmap_zero(bits, chip->ngpio); + + /* get bits are evaluated a gpio port register at a time */ + for (i = 0; i < ARRAY_SIZE(ports); i++) { + /* gpio offset in bits array */ + bits_offset = i * gpio_reg_size; + + /* word index for bits array */ + word_index = BIT_WORD(bits_offset); + + /* gpio offset within current word of bits array */ + word_offset = bits_offset % BITS_PER_LONG; + + /* mask of get bits for current gpio within current word */ + word_mask = mask[word_index] & (port_mask << word_offset); + if (!word_mask) { + /* no get bits in this port so skip to next one */ + continue; + } + + /* read bits from current gpio port */ + port_state = inb(dio48egpio->base + ports[i]); + + /* store acquired bits at respective bits array offset */ + bits[word_index] |= port_state << word_offset; + } + + return 0; +} + +static void dio48e_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip); + const unsigned port = offset / 8; + const unsigned mask = BIT(offset % 8); + const unsigned out_port = (port > 2) ? port + 1 : port; + unsigned long flags; + + raw_spin_lock_irqsave(&dio48egpio->lock, flags); + + if (value) + dio48egpio->out_state[port] |= mask; + else + dio48egpio->out_state[port] &= ~mask; + + outb(dio48egpio->out_state[port], dio48egpio->base + out_port); + + raw_spin_unlock_irqrestore(&dio48egpio->lock, flags); +} + +static void dio48e_gpio_set_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip); + unsigned int i; + const unsigned int gpio_reg_size = 8; + unsigned int port; + unsigned int out_port; + unsigned int bitmask; + unsigned long flags; + + /* set bits are evaluated a gpio register size at a time */ + for (i = 0; i < chip->ngpio; i += gpio_reg_size) { + /* no more set bits in this mask word; skip to the next word */ + if (!mask[BIT_WORD(i)]) { + i = (BIT_WORD(i) + 1) * BITS_PER_LONG - gpio_reg_size; + continue; + } + + port = i / gpio_reg_size; + out_port = (port > 2) ? port + 1 : port; + bitmask = mask[BIT_WORD(i)] & bits[BIT_WORD(i)]; + + raw_spin_lock_irqsave(&dio48egpio->lock, flags); + + /* update output state data and set device gpio register */ + dio48egpio->out_state[port] &= ~mask[BIT_WORD(i)]; + dio48egpio->out_state[port] |= bitmask; + outb(dio48egpio->out_state[port], dio48egpio->base + out_port); + + raw_spin_unlock_irqrestore(&dio48egpio->lock, flags); + + /* prepare for next gpio register set */ + mask[BIT_WORD(i)] >>= gpio_reg_size; + bits[BIT_WORD(i)] >>= gpio_reg_size; + } +} + +static void dio48e_irq_ack(struct irq_data *data) +{ +} + +static void dio48e_irq_mask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip); + const unsigned long offset = irqd_to_hwirq(data); + unsigned long flags; + + /* only bit 3 on each respective Port C supports interrupts */ + if (offset != 19 && offset != 43) + return; + + raw_spin_lock_irqsave(&dio48egpio->lock, flags); + + if (offset == 19) + dio48egpio->irq_mask &= ~BIT(0); + else + dio48egpio->irq_mask &= ~BIT(1); + + if (!dio48egpio->irq_mask) + /* disable interrupts */ + inb(dio48egpio->base + 0xB); + + raw_spin_unlock_irqrestore(&dio48egpio->lock, flags); +} + +static void dio48e_irq_unmask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip); + const unsigned long offset = irqd_to_hwirq(data); + unsigned long flags; + + /* only bit 3 on each respective Port C supports interrupts */ + if (offset != 19 && offset != 43) + return; + + raw_spin_lock_irqsave(&dio48egpio->lock, flags); + + if (!dio48egpio->irq_mask) { + /* enable interrupts */ + outb(0x00, dio48egpio->base + 0xF); + outb(0x00, dio48egpio->base + 0xB); + } + + if (offset == 19) + dio48egpio->irq_mask |= BIT(0); + else + dio48egpio->irq_mask |= BIT(1); + + raw_spin_unlock_irqrestore(&dio48egpio->lock, flags); +} + +static int dio48e_irq_set_type(struct irq_data *data, unsigned flow_type) +{ + const unsigned long offset = irqd_to_hwirq(data); + + /* only bit 3 on each respective Port C supports interrupts */ + if (offset != 19 && offset != 43) + return -EINVAL; + + if (flow_type != IRQ_TYPE_NONE && flow_type != IRQ_TYPE_EDGE_RISING) + return -EINVAL; + + return 0; +} + +static struct irq_chip dio48e_irqchip = { + .name = "104-dio-48e", + .irq_ack = dio48e_irq_ack, + .irq_mask = dio48e_irq_mask, + .irq_unmask = dio48e_irq_unmask, + .irq_set_type = dio48e_irq_set_type +}; + +static irqreturn_t dio48e_irq_handler(int irq, void *dev_id) +{ + struct dio48e_gpio *const dio48egpio = dev_id; + struct gpio_chip *const chip = &dio48egpio->chip; + const unsigned long irq_mask = dio48egpio->irq_mask; + unsigned long gpio; + + for_each_set_bit(gpio, &irq_mask, 2) + generic_handle_irq(irq_find_mapping(chip->irq.domain, + 19 + gpio*24)); + + raw_spin_lock(&dio48egpio->lock); + + outb(0x00, dio48egpio->base + 0xF); + + raw_spin_unlock(&dio48egpio->lock); + + return IRQ_HANDLED; +} + +#define DIO48E_NGPIO 48 +static const char *dio48e_names[DIO48E_NGPIO] = { + "PPI Group 0 Port A 0", "PPI Group 0 Port A 1", "PPI Group 0 Port A 2", + "PPI Group 0 Port A 3", "PPI Group 0 Port A 4", "PPI Group 0 Port A 5", + "PPI Group 0 Port A 6", "PPI Group 0 Port A 7", "PPI Group 0 Port B 0", + "PPI Group 0 Port B 1", "PPI Group 0 Port B 2", "PPI Group 0 Port B 3", + "PPI Group 0 Port B 4", "PPI Group 0 Port B 5", "PPI Group 0 Port B 6", + "PPI Group 0 Port B 7", "PPI Group 0 Port C 0", "PPI Group 0 Port C 1", + "PPI Group 0 Port C 2", "PPI Group 0 Port C 3", "PPI Group 0 Port C 4", + "PPI Group 0 Port C 5", "PPI Group 0 Port C 6", "PPI Group 0 Port C 7", + "PPI Group 1 Port A 0", "PPI Group 1 Port A 1", "PPI Group 1 Port A 2", + "PPI Group 1 Port A 3", "PPI Group 1 Port A 4", "PPI Group 1 Port A 5", + "PPI Group 1 Port A 6", "PPI Group 1 Port A 7", "PPI Group 1 Port B 0", + "PPI Group 1 Port B 1", "PPI Group 1 Port B 2", "PPI Group 1 Port B 3", + "PPI Group 1 Port B 4", "PPI Group 1 Port B 5", "PPI Group 1 Port B 6", + "PPI Group 1 Port B 7", "PPI Group 1 Port C 0", "PPI Group 1 Port C 1", + "PPI Group 1 Port C 2", "PPI Group 1 Port C 3", "PPI Group 1 Port C 4", + "PPI Group 1 Port C 5", "PPI Group 1 Port C 6", "PPI Group 1 Port C 7" +}; + +static int dio48e_probe(struct device *dev, unsigned int id) +{ + struct dio48e_gpio *dio48egpio; + const char *const name = dev_name(dev); + int err; + + dio48egpio = devm_kzalloc(dev, sizeof(*dio48egpio), GFP_KERNEL); + if (!dio48egpio) + return -ENOMEM; + + if (!devm_request_region(dev, base[id], DIO48E_EXTENT, name)) { + dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", + base[id], base[id] + DIO48E_EXTENT); + return -EBUSY; + } + + dio48egpio->chip.label = name; + dio48egpio->chip.parent = dev; + dio48egpio->chip.owner = THIS_MODULE; + dio48egpio->chip.base = -1; + dio48egpio->chip.ngpio = DIO48E_NGPIO; + dio48egpio->chip.names = dio48e_names; + dio48egpio->chip.get_direction = dio48e_gpio_get_direction; + dio48egpio->chip.direction_input = dio48e_gpio_direction_input; + dio48egpio->chip.direction_output = dio48e_gpio_direction_output; + dio48egpio->chip.get = dio48e_gpio_get; + dio48egpio->chip.get_multiple = dio48e_gpio_get_multiple; + dio48egpio->chip.set = dio48e_gpio_set; + dio48egpio->chip.set_multiple = dio48e_gpio_set_multiple; + dio48egpio->base = base[id]; + + raw_spin_lock_init(&dio48egpio->lock); + + err = devm_gpiochip_add_data(dev, &dio48egpio->chip, dio48egpio); + if (err) { + dev_err(dev, "GPIO registering failed (%d)\n", err); + return err; + } + + /* initialize all GPIO as output */ + outb(0x80, base[id] + 3); + outb(0x00, base[id]); + outb(0x00, base[id] + 1); + outb(0x00, base[id] + 2); + outb(0x00, base[id] + 3); + outb(0x80, base[id] + 7); + outb(0x00, base[id] + 4); + outb(0x00, base[id] + 5); + outb(0x00, base[id] + 6); + outb(0x00, base[id] + 7); + + /* disable IRQ by default */ + inb(base[id] + 0xB); + + err = gpiochip_irqchip_add(&dio48egpio->chip, &dio48e_irqchip, 0, + handle_edge_irq, IRQ_TYPE_NONE); + if (err) { + dev_err(dev, "Could not add irqchip (%d)\n", err); + return err; + } + + err = devm_request_irq(dev, irq[id], dio48e_irq_handler, 0, name, + dio48egpio); + if (err) { + dev_err(dev, "IRQ handler registering failed (%d)\n", err); + return err; + } + + return 0; +} + +static struct isa_driver dio48e_driver = { + .probe = dio48e_probe, + .driver = { + .name = "104-dio-48e" + }, +}; +module_isa_driver(dio48e_driver, num_dio48e); + +MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); +MODULE_DESCRIPTION("ACCES 104-DIO-48E GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c new file mode 100644 index 000000000..2c9738adb --- /dev/null +++ b/drivers/gpio/gpio-104-idi-48.c @@ -0,0 +1,348 @@ +/* + * GPIO driver for the ACCES 104-IDI-48 family + * Copyright (C) 2015 William Breathitt Gray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * This driver supports the following ACCES devices: 104-IDI-48A, + * 104-IDI-48AC, 104-IDI-48B, and 104-IDI-48BC. + */ +#include <linux/bitmap.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/irqdesc.h> +#include <linux/isa.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> + +#define IDI_48_EXTENT 8 +#define MAX_NUM_IDI_48 max_num_isa_dev(IDI_48_EXTENT) + +static unsigned int base[MAX_NUM_IDI_48]; +static unsigned int num_idi_48; +module_param_hw_array(base, uint, ioport, &num_idi_48, 0); +MODULE_PARM_DESC(base, "ACCES 104-IDI-48 base addresses"); + +static unsigned int irq[MAX_NUM_IDI_48]; +module_param_hw_array(irq, uint, irq, NULL, 0); +MODULE_PARM_DESC(irq, "ACCES 104-IDI-48 interrupt line numbers"); + +/** + * struct idi_48_gpio - GPIO device private data structure + * @chip: instance of the gpio_chip + * @lock: synchronization lock to prevent I/O race conditions + * @ack_lock: synchronization lock to prevent IRQ handler race conditions + * @irq_mask: input bits affected by interrupts + * @base: base port address of the GPIO device + * @cos_enb: Change-Of-State IRQ enable boundaries mask + */ +struct idi_48_gpio { + struct gpio_chip chip; + raw_spinlock_t lock; + spinlock_t ack_lock; + unsigned char irq_mask[6]; + unsigned base; + unsigned char cos_enb; +}; + +static int idi_48_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + return 1; +} + +static int idi_48_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return 0; +} + +static int idi_48_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip); + unsigned i; + const unsigned register_offset[6] = { 0, 1, 2, 4, 5, 6 }; + unsigned base_offset; + unsigned mask; + + for (i = 0; i < 48; i += 8) + if (offset < i + 8) { + base_offset = register_offset[i / 8]; + mask = BIT(offset - i); + + return !!(inb(idi48gpio->base + base_offset) & mask); + } + + /* The following line should never execute since offset < 48 */ + return 0; +} + +static int idi_48_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, + unsigned long *bits) +{ + struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip); + size_t i; + static const size_t ports[] = { 0, 1, 2, 4, 5, 6 }; + const unsigned int gpio_reg_size = 8; + unsigned int bits_offset; + size_t word_index; + unsigned int word_offset; + unsigned long word_mask; + const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0); + unsigned long port_state; + + /* clear bits array to a clean slate */ + bitmap_zero(bits, chip->ngpio); + + /* get bits are evaluated a gpio port register at a time */ + for (i = 0; i < ARRAY_SIZE(ports); i++) { + /* gpio offset in bits array */ + bits_offset = i * gpio_reg_size; + + /* word index for bits array */ + word_index = BIT_WORD(bits_offset); + + /* gpio offset within current word of bits array */ + word_offset = bits_offset % BITS_PER_LONG; + + /* mask of get bits for current gpio within current word */ + word_mask = mask[word_index] & (port_mask << word_offset); + if (!word_mask) { + /* no get bits in this port so skip to next one */ + continue; + } + + /* read bits from current gpio port */ + port_state = inb(idi48gpio->base + ports[i]); + + /* store acquired bits at respective bits array offset */ + bits[word_index] |= port_state << word_offset; + } + + return 0; +} + +static void idi_48_irq_ack(struct irq_data *data) +{ +} + +static void idi_48_irq_mask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip); + const unsigned offset = irqd_to_hwirq(data); + unsigned i; + unsigned mask; + unsigned boundary; + unsigned long flags; + + for (i = 0; i < 48; i += 8) + if (offset < i + 8) { + mask = BIT(offset - i); + boundary = i / 8; + + idi48gpio->irq_mask[boundary] &= ~mask; + + if (!idi48gpio->irq_mask[boundary]) { + idi48gpio->cos_enb &= ~BIT(boundary); + + raw_spin_lock_irqsave(&idi48gpio->lock, flags); + + outb(idi48gpio->cos_enb, idi48gpio->base + 7); + + raw_spin_unlock_irqrestore(&idi48gpio->lock, + flags); + } + + return; + } +} + +static void idi_48_irq_unmask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip); + const unsigned offset = irqd_to_hwirq(data); + unsigned i; + unsigned mask; + unsigned boundary; + unsigned prev_irq_mask; + unsigned long flags; + + for (i = 0; i < 48; i += 8) + if (offset < i + 8) { + mask = BIT(offset - i); + boundary = i / 8; + prev_irq_mask = idi48gpio->irq_mask[boundary]; + + idi48gpio->irq_mask[boundary] |= mask; + + if (!prev_irq_mask) { + idi48gpio->cos_enb |= BIT(boundary); + + raw_spin_lock_irqsave(&idi48gpio->lock, flags); + + outb(idi48gpio->cos_enb, idi48gpio->base + 7); + + raw_spin_unlock_irqrestore(&idi48gpio->lock, + flags); + } + + return; + } +} + +static int idi_48_irq_set_type(struct irq_data *data, unsigned flow_type) +{ + /* The only valid irq types are none and both-edges */ + if (flow_type != IRQ_TYPE_NONE && + (flow_type & IRQ_TYPE_EDGE_BOTH) != IRQ_TYPE_EDGE_BOTH) + return -EINVAL; + + return 0; +} + +static struct irq_chip idi_48_irqchip = { + .name = "104-idi-48", + .irq_ack = idi_48_irq_ack, + .irq_mask = idi_48_irq_mask, + .irq_unmask = idi_48_irq_unmask, + .irq_set_type = idi_48_irq_set_type +}; + +static irqreturn_t idi_48_irq_handler(int irq, void *dev_id) +{ + struct idi_48_gpio *const idi48gpio = dev_id; + unsigned long cos_status; + unsigned long boundary; + unsigned long irq_mask; + unsigned long bit_num; + unsigned long gpio; + struct gpio_chip *const chip = &idi48gpio->chip; + + spin_lock(&idi48gpio->ack_lock); + + raw_spin_lock(&idi48gpio->lock); + + cos_status = inb(idi48gpio->base + 7); + + raw_spin_unlock(&idi48gpio->lock); + + /* IRQ Status (bit 6) is active low (0 = IRQ generated by device) */ + if (cos_status & BIT(6)) { + spin_unlock(&idi48gpio->ack_lock); + return IRQ_NONE; + } + + /* Bit 0-5 indicate which Change-Of-State boundary triggered the IRQ */ + cos_status &= 0x3F; + + for_each_set_bit(boundary, &cos_status, 6) { + irq_mask = idi48gpio->irq_mask[boundary]; + + for_each_set_bit(bit_num, &irq_mask, 8) { + gpio = bit_num + boundary * 8; + + generic_handle_irq(irq_find_mapping(chip->irq.domain, + gpio)); + } + } + + spin_unlock(&idi48gpio->ack_lock); + + return IRQ_HANDLED; +} + +#define IDI48_NGPIO 48 +static const char *idi48_names[IDI48_NGPIO] = { + "Bit 0 A", "Bit 1 A", "Bit 2 A", "Bit 3 A", "Bit 4 A", "Bit 5 A", + "Bit 6 A", "Bit 7 A", "Bit 8 A", "Bit 9 A", "Bit 10 A", "Bit 11 A", + "Bit 12 A", "Bit 13 A", "Bit 14 A", "Bit 15 A", "Bit 16 A", "Bit 17 A", + "Bit 18 A", "Bit 19 A", "Bit 20 A", "Bit 21 A", "Bit 22 A", "Bit 23 A", + "Bit 0 B", "Bit 1 B", "Bit 2 B", "Bit 3 B", "Bit 4 B", "Bit 5 B", + "Bit 6 B", "Bit 7 B", "Bit 8 B", "Bit 9 B", "Bit 10 B", "Bit 11 B", + "Bit 12 B", "Bit 13 B", "Bit 14 B", "Bit 15 B", "Bit 16 B", "Bit 17 B", + "Bit 18 B", "Bit 19 B", "Bit 20 B", "Bit 21 B", "Bit 22 B", "Bit 23 B" +}; + +static int idi_48_probe(struct device *dev, unsigned int id) +{ + struct idi_48_gpio *idi48gpio; + const char *const name = dev_name(dev); + int err; + + idi48gpio = devm_kzalloc(dev, sizeof(*idi48gpio), GFP_KERNEL); + if (!idi48gpio) + return -ENOMEM; + + if (!devm_request_region(dev, base[id], IDI_48_EXTENT, name)) { + dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", + base[id], base[id] + IDI_48_EXTENT); + return -EBUSY; + } + + idi48gpio->chip.label = name; + idi48gpio->chip.parent = dev; + idi48gpio->chip.owner = THIS_MODULE; + idi48gpio->chip.base = -1; + idi48gpio->chip.ngpio = IDI48_NGPIO; + idi48gpio->chip.names = idi48_names; + idi48gpio->chip.get_direction = idi_48_gpio_get_direction; + idi48gpio->chip.direction_input = idi_48_gpio_direction_input; + idi48gpio->chip.get = idi_48_gpio_get; + idi48gpio->chip.get_multiple = idi_48_gpio_get_multiple; + idi48gpio->base = base[id]; + + raw_spin_lock_init(&idi48gpio->lock); + spin_lock_init(&idi48gpio->ack_lock); + + err = devm_gpiochip_add_data(dev, &idi48gpio->chip, idi48gpio); + if (err) { + dev_err(dev, "GPIO registering failed (%d)\n", err); + return err; + } + + /* Disable IRQ by default */ + outb(0, base[id] + 7); + inb(base[id] + 7); + + err = gpiochip_irqchip_add(&idi48gpio->chip, &idi_48_irqchip, 0, + handle_edge_irq, IRQ_TYPE_NONE); + if (err) { + dev_err(dev, "Could not add irqchip (%d)\n", err); + return err; + } + + err = devm_request_irq(dev, irq[id], idi_48_irq_handler, IRQF_SHARED, + name, idi48gpio); + if (err) { + dev_err(dev, "IRQ handler registering failed (%d)\n", err); + return err; + } + + return 0; +} + +static struct isa_driver idi_48_driver = { + .probe = idi_48_probe, + .driver = { + .name = "104-idi-48" + }, +}; +module_isa_driver(idi_48_driver, num_idi_48); + +MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); +MODULE_DESCRIPTION("ACCES 104-IDI-48 GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-104-idio-16.c b/drivers/gpio/gpio-104-idio-16.c new file mode 100644 index 000000000..96700308c --- /dev/null +++ b/drivers/gpio/gpio-104-idio-16.c @@ -0,0 +1,307 @@ +/* + * GPIO driver for the ACCES 104-IDIO-16 family + * Copyright (C) 2015 William Breathitt Gray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * This driver supports the following ACCES devices: 104-IDIO-16, + * 104-IDIO-16E, 104-IDO-16, 104-IDIO-8, 104-IDIO-8E, and 104-IDO-8. + */ +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/irqdesc.h> +#include <linux/isa.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> + +#define IDIO_16_EXTENT 8 +#define MAX_NUM_IDIO_16 max_num_isa_dev(IDIO_16_EXTENT) + +static unsigned int base[MAX_NUM_IDIO_16]; +static unsigned int num_idio_16; +module_param_hw_array(base, uint, ioport, &num_idio_16, 0); +MODULE_PARM_DESC(base, "ACCES 104-IDIO-16 base addresses"); + +static unsigned int irq[MAX_NUM_IDIO_16]; +module_param_hw_array(irq, uint, irq, NULL, 0); +MODULE_PARM_DESC(irq, "ACCES 104-IDIO-16 interrupt line numbers"); + +/** + * struct idio_16_gpio - GPIO device private data structure + * @chip: instance of the gpio_chip + * @lock: synchronization lock to prevent I/O race conditions + * @irq_mask: I/O bits affected by interrupts + * @base: base port address of the GPIO device + * @out_state: output bits state + */ +struct idio_16_gpio { + struct gpio_chip chip; + raw_spinlock_t lock; + unsigned long irq_mask; + unsigned base; + unsigned out_state; +}; + +static int idio_16_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + if (offset > 15) + return 1; + + return 0; +} + +static int idio_16_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return 0; +} + +static int idio_16_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + chip->set(chip, offset, value); + return 0; +} + +static int idio_16_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip); + const unsigned mask = BIT(offset-16); + + if (offset < 16) + return -EINVAL; + + if (offset < 24) + return !!(inb(idio16gpio->base + 1) & mask); + + return !!(inb(idio16gpio->base + 5) & (mask>>8)); +} + +static int idio_16_gpio_get_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip); + + *bits = 0; + if (*mask & GENMASK(23, 16)) + *bits |= (unsigned long)inb(idio16gpio->base + 1) << 16; + if (*mask & GENMASK(31, 24)) + *bits |= (unsigned long)inb(idio16gpio->base + 5) << 24; + + return 0; +} + +static void idio_16_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip); + const unsigned mask = BIT(offset); + unsigned long flags; + + if (offset > 15) + return; + + raw_spin_lock_irqsave(&idio16gpio->lock, flags); + + if (value) + idio16gpio->out_state |= mask; + else + idio16gpio->out_state &= ~mask; + + if (offset > 7) + outb(idio16gpio->out_state >> 8, idio16gpio->base + 4); + else + outb(idio16gpio->out_state, idio16gpio->base); + + raw_spin_unlock_irqrestore(&idio16gpio->lock, flags); +} + +static void idio_16_gpio_set_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip); + unsigned long flags; + + raw_spin_lock_irqsave(&idio16gpio->lock, flags); + + idio16gpio->out_state &= ~*mask; + idio16gpio->out_state |= *mask & *bits; + + if (*mask & 0xFF) + outb(idio16gpio->out_state, idio16gpio->base); + if ((*mask >> 8) & 0xFF) + outb(idio16gpio->out_state >> 8, idio16gpio->base + 4); + + raw_spin_unlock_irqrestore(&idio16gpio->lock, flags); +} + +static void idio_16_irq_ack(struct irq_data *data) +{ +} + +static void idio_16_irq_mask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip); + const unsigned long mask = BIT(irqd_to_hwirq(data)); + unsigned long flags; + + idio16gpio->irq_mask &= ~mask; + + if (!idio16gpio->irq_mask) { + raw_spin_lock_irqsave(&idio16gpio->lock, flags); + + outb(0, idio16gpio->base + 2); + + raw_spin_unlock_irqrestore(&idio16gpio->lock, flags); + } +} + +static void idio_16_irq_unmask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip); + const unsigned long mask = BIT(irqd_to_hwirq(data)); + const unsigned long prev_irq_mask = idio16gpio->irq_mask; + unsigned long flags; + + idio16gpio->irq_mask |= mask; + + if (!prev_irq_mask) { + raw_spin_lock_irqsave(&idio16gpio->lock, flags); + + inb(idio16gpio->base + 2); + + raw_spin_unlock_irqrestore(&idio16gpio->lock, flags); + } +} + +static int idio_16_irq_set_type(struct irq_data *data, unsigned flow_type) +{ + /* The only valid irq types are none and both-edges */ + if (flow_type != IRQ_TYPE_NONE && + (flow_type & IRQ_TYPE_EDGE_BOTH) != IRQ_TYPE_EDGE_BOTH) + return -EINVAL; + + return 0; +} + +static struct irq_chip idio_16_irqchip = { + .name = "104-idio-16", + .irq_ack = idio_16_irq_ack, + .irq_mask = idio_16_irq_mask, + .irq_unmask = idio_16_irq_unmask, + .irq_set_type = idio_16_irq_set_type +}; + +static irqreturn_t idio_16_irq_handler(int irq, void *dev_id) +{ + struct idio_16_gpio *const idio16gpio = dev_id; + struct gpio_chip *const chip = &idio16gpio->chip; + int gpio; + + for_each_set_bit(gpio, &idio16gpio->irq_mask, chip->ngpio) + generic_handle_irq(irq_find_mapping(chip->irq.domain, gpio)); + + raw_spin_lock(&idio16gpio->lock); + + outb(0, idio16gpio->base + 1); + + raw_spin_unlock(&idio16gpio->lock); + + return IRQ_HANDLED; +} + +#define IDIO_16_NGPIO 32 +static const char *idio_16_names[IDIO_16_NGPIO] = { + "OUT0", "OUT1", "OUT2", "OUT3", "OUT4", "OUT5", "OUT6", "OUT7", + "OUT8", "OUT9", "OUT10", "OUT11", "OUT12", "OUT13", "OUT14", "OUT15", + "IIN0", "IIN1", "IIN2", "IIN3", "IIN4", "IIN5", "IIN6", "IIN7", + "IIN8", "IIN9", "IIN10", "IIN11", "IIN12", "IIN13", "IIN14", "IIN15" +}; + +static int idio_16_probe(struct device *dev, unsigned int id) +{ + struct idio_16_gpio *idio16gpio; + const char *const name = dev_name(dev); + int err; + + idio16gpio = devm_kzalloc(dev, sizeof(*idio16gpio), GFP_KERNEL); + if (!idio16gpio) + return -ENOMEM; + + if (!devm_request_region(dev, base[id], IDIO_16_EXTENT, name)) { + dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", + base[id], base[id] + IDIO_16_EXTENT); + return -EBUSY; + } + + idio16gpio->chip.label = name; + idio16gpio->chip.parent = dev; + idio16gpio->chip.owner = THIS_MODULE; + idio16gpio->chip.base = -1; + idio16gpio->chip.ngpio = IDIO_16_NGPIO; + idio16gpio->chip.names = idio_16_names; + idio16gpio->chip.get_direction = idio_16_gpio_get_direction; + idio16gpio->chip.direction_input = idio_16_gpio_direction_input; + idio16gpio->chip.direction_output = idio_16_gpio_direction_output; + idio16gpio->chip.get = idio_16_gpio_get; + idio16gpio->chip.get_multiple = idio_16_gpio_get_multiple; + idio16gpio->chip.set = idio_16_gpio_set; + idio16gpio->chip.set_multiple = idio_16_gpio_set_multiple; + idio16gpio->base = base[id]; + idio16gpio->out_state = 0xFFFF; + + raw_spin_lock_init(&idio16gpio->lock); + + err = devm_gpiochip_add_data(dev, &idio16gpio->chip, idio16gpio); + if (err) { + dev_err(dev, "GPIO registering failed (%d)\n", err); + return err; + } + + /* Disable IRQ by default */ + outb(0, base[id] + 2); + outb(0, base[id] + 1); + + err = gpiochip_irqchip_add(&idio16gpio->chip, &idio_16_irqchip, 0, + handle_edge_irq, IRQ_TYPE_NONE); + if (err) { + dev_err(dev, "Could not add irqchip (%d)\n", err); + return err; + } + + err = devm_request_irq(dev, irq[id], idio_16_irq_handler, 0, name, + idio16gpio); + if (err) { + dev_err(dev, "IRQ handler registering failed (%d)\n", err); + return err; + } + + return 0; +} + +static struct isa_driver idio_16_driver = { + .probe = idio_16_probe, + .driver = { + .name = "104-idio-16" + }, +}; + +module_isa_driver(idio_16_driver, num_idio_16); + +MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); +MODULE_DESCRIPTION("ACCES 104-IDIO-16 GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c new file mode 100644 index 000000000..fb7b62076 --- /dev/null +++ b/drivers/gpio/gpio-74x164.c @@ -0,0 +1,202 @@ +/* + * 74Hx164 - Generic serial-in/parallel-out 8-bits shift register GPIO driver + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Miguel Gaio <miguel.gaio@efixo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/mutex.h> +#include <linux/spi/spi.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/consumer.h> +#include <linux/slab.h> +#include <linux/module.h> + +#define GEN_74X164_NUMBER_GPIOS 8 + +struct gen_74x164_chip { + struct gpio_chip gpio_chip; + struct mutex lock; + struct gpio_desc *gpiod_oe; + u32 registers; + /* + * Since the registers are chained, every byte sent will make + * the previous byte shift to the next register in the + * chain. Thus, the first byte sent will end up in the last + * register at the end of the transfer. So, to have a logical + * numbering, store the bytes in reverse order. + */ + u8 buffer[]; +}; + +static int __gen_74x164_write_config(struct gen_74x164_chip *chip) +{ + return spi_write(to_spi_device(chip->gpio_chip.parent), chip->buffer, + chip->registers); +} + +static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset) +{ + struct gen_74x164_chip *chip = gpiochip_get_data(gc); + u8 bank = chip->registers - 1 - offset / 8; + u8 pin = offset % 8; + int ret; + + mutex_lock(&chip->lock); + ret = (chip->buffer[bank] >> pin) & 0x1; + mutex_unlock(&chip->lock); + + return ret; +} + +static void gen_74x164_set_value(struct gpio_chip *gc, + unsigned offset, int val) +{ + struct gen_74x164_chip *chip = gpiochip_get_data(gc); + u8 bank = chip->registers - 1 - offset / 8; + u8 pin = offset % 8; + + mutex_lock(&chip->lock); + if (val) + chip->buffer[bank] |= (1 << pin); + else + chip->buffer[bank] &= ~(1 << pin); + + __gen_74x164_write_config(chip); + mutex_unlock(&chip->lock); +} + +static void gen_74x164_set_multiple(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + struct gen_74x164_chip *chip = gpiochip_get_data(gc); + unsigned int i, idx, shift; + u8 bank, bankmask; + + mutex_lock(&chip->lock); + for (i = 0, bank = chip->registers - 1; i < chip->registers; + i++, bank--) { + idx = i / sizeof(*mask); + shift = i % sizeof(*mask) * BITS_PER_BYTE; + bankmask = mask[idx] >> shift; + if (!bankmask) + continue; + + chip->buffer[bank] &= ~bankmask; + chip->buffer[bank] |= bankmask & (bits[idx] >> shift); + } + __gen_74x164_write_config(chip); + mutex_unlock(&chip->lock); +} + +static int gen_74x164_direction_output(struct gpio_chip *gc, + unsigned offset, int val) +{ + gen_74x164_set_value(gc, offset, val); + return 0; +} + +static int gen_74x164_probe(struct spi_device *spi) +{ + struct gen_74x164_chip *chip; + u32 nregs; + int ret; + + /* + * bits_per_word cannot be configured in platform data + */ + spi->bits_per_word = 8; + + ret = spi_setup(spi); + if (ret < 0) + return ret; + + if (of_property_read_u32(spi->dev.of_node, "registers-number", + &nregs)) { + dev_err(&spi->dev, + "Missing registers-number property in the DT.\n"); + return -EINVAL; + } + + chip = devm_kzalloc(&spi->dev, sizeof(*chip) + nregs, GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->gpiod_oe = devm_gpiod_get_optional(&spi->dev, "enable", + GPIOD_OUT_LOW); + if (IS_ERR(chip->gpiod_oe)) + return PTR_ERR(chip->gpiod_oe); + + gpiod_set_value_cansleep(chip->gpiod_oe, 1); + + spi_set_drvdata(spi, chip); + + chip->gpio_chip.label = spi->modalias; + chip->gpio_chip.direction_output = gen_74x164_direction_output; + chip->gpio_chip.get = gen_74x164_get_value; + chip->gpio_chip.set = gen_74x164_set_value; + chip->gpio_chip.set_multiple = gen_74x164_set_multiple; + chip->gpio_chip.base = -1; + + chip->registers = nregs; + chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers; + + chip->gpio_chip.can_sleep = true; + chip->gpio_chip.parent = &spi->dev; + chip->gpio_chip.owner = THIS_MODULE; + + mutex_init(&chip->lock); + + ret = __gen_74x164_write_config(chip); + if (ret) { + dev_err(&spi->dev, "Failed writing: %d\n", ret); + goto exit_destroy; + } + + ret = gpiochip_add_data(&chip->gpio_chip, chip); + if (!ret) + return 0; + +exit_destroy: + mutex_destroy(&chip->lock); + + return ret; +} + +static int gen_74x164_remove(struct spi_device *spi) +{ + struct gen_74x164_chip *chip = spi_get_drvdata(spi); + + gpiod_set_value_cansleep(chip->gpiod_oe, 0); + gpiochip_remove(&chip->gpio_chip); + mutex_destroy(&chip->lock); + + return 0; +} + +static const struct of_device_id gen_74x164_dt_ids[] = { + { .compatible = "fairchild,74hc595" }, + { .compatible = "nxp,74lvc594" }, + {}, +}; +MODULE_DEVICE_TABLE(of, gen_74x164_dt_ids); + +static struct spi_driver gen_74x164_driver = { + .driver = { + .name = "74x164", + .of_match_table = gen_74x164_dt_ids, + }, + .probe = gen_74x164_probe, + .remove = gen_74x164_remove, +}; +module_spi_driver(gen_74x164_driver); + +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); +MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>"); +MODULE_DESCRIPTION("GPIO expander driver for 74X164 8-bits shift register"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-74xx-mmio.c b/drivers/gpio/gpio-74xx-mmio.c new file mode 100644 index 000000000..49616ec81 --- /dev/null +++ b/drivers/gpio/gpio-74xx-mmio.c @@ -0,0 +1,152 @@ +/* + * 74xx MMIO GPIO driver + * + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/gpio/driver.h> +#include <linux/platform_device.h> + +#define MMIO_74XX_DIR_IN (0 << 8) +#define MMIO_74XX_DIR_OUT (1 << 8) +#define MMIO_74XX_BIT_CNT(x) ((x) & 0xff) + +struct mmio_74xx_gpio_priv { + struct gpio_chip gc; + unsigned flags; +}; + +static const struct of_device_id mmio_74xx_gpio_ids[] = { + { + .compatible = "ti,741g125", + .data = (const void *)(MMIO_74XX_DIR_IN | 1), + }, + { + .compatible = "ti,742g125", + .data = (const void *)(MMIO_74XX_DIR_IN | 2), + }, + { + .compatible = "ti,74125", + .data = (const void *)(MMIO_74XX_DIR_IN | 4), + }, + { + .compatible = "ti,74365", + .data = (const void *)(MMIO_74XX_DIR_IN | 6), + }, + { + .compatible = "ti,74244", + .data = (const void *)(MMIO_74XX_DIR_IN | 8), + }, + { + .compatible = "ti,741624", + .data = (const void *)(MMIO_74XX_DIR_IN | 16), + }, + { + .compatible = "ti,741g74", + .data = (const void *)(MMIO_74XX_DIR_OUT | 1), + }, + { + .compatible = "ti,7474", + .data = (const void *)(MMIO_74XX_DIR_OUT | 2), + }, + { + .compatible = "ti,74175", + .data = (const void *)(MMIO_74XX_DIR_OUT | 4), + }, + { + .compatible = "ti,74174", + .data = (const void *)(MMIO_74XX_DIR_OUT | 6), + }, + { + .compatible = "ti,74273", + .data = (const void *)(MMIO_74XX_DIR_OUT | 8), + }, + { + .compatible = "ti,7416374", + .data = (const void *)(MMIO_74XX_DIR_OUT | 16), + }, + { } +}; +MODULE_DEVICE_TABLE(of, mmio_74xx_gpio_ids); + +static int mmio_74xx_get_direction(struct gpio_chip *gc, unsigned offset) +{ + struct mmio_74xx_gpio_priv *priv = gpiochip_get_data(gc); + + return !(priv->flags & MMIO_74XX_DIR_OUT); +} + +static int mmio_74xx_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct mmio_74xx_gpio_priv *priv = gpiochip_get_data(gc); + + return (priv->flags & MMIO_74XX_DIR_OUT) ? -ENOTSUPP : 0; +} + +static int mmio_74xx_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct mmio_74xx_gpio_priv *priv = gpiochip_get_data(gc); + + if (priv->flags & MMIO_74XX_DIR_OUT) { + gc->set(gc, gpio, val); + return 0; + } + + return -ENOTSUPP; +} + +static int mmio_74xx_gpio_probe(struct platform_device *pdev) +{ + struct mmio_74xx_gpio_priv *priv; + struct resource *res; + void __iomem *dat; + int err; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->flags = (uintptr_t)of_device_get_match_data(&pdev->dev); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dat = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dat)) + return PTR_ERR(dat); + + err = bgpio_init(&priv->gc, &pdev->dev, + DIV_ROUND_UP(MMIO_74XX_BIT_CNT(priv->flags), 8), + dat, NULL, NULL, NULL, NULL, 0); + if (err) + return err; + + priv->gc.direction_input = mmio_74xx_dir_in; + priv->gc.direction_output = mmio_74xx_dir_out; + priv->gc.get_direction = mmio_74xx_get_direction; + priv->gc.ngpio = MMIO_74XX_BIT_CNT(priv->flags); + priv->gc.owner = THIS_MODULE; + + platform_set_drvdata(pdev, priv); + + return devm_gpiochip_add_data(&pdev->dev, &priv->gc, priv); +} + +static struct platform_driver mmio_74xx_gpio_driver = { + .driver = { + .name = "74xx-mmio-gpio", + .of_match_table = mmio_74xx_gpio_ids, + }, + .probe = mmio_74xx_gpio_probe, +}; +module_platform_driver(mmio_74xx_gpio_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); +MODULE_DESCRIPTION("74xx MMIO GPIO driver"); diff --git a/drivers/gpio/gpio-adnp.c b/drivers/gpio/gpio-adnp.c new file mode 100644 index 000000000..12acdac85 --- /dev/null +++ b/drivers/gpio/gpio-adnp.c @@ -0,0 +1,548 @@ +/* + * Copyright (C) 2011-2012 Avionic Design GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio/driver.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of_irq.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + +#define GPIO_DDR(gpio) (0x00 << (gpio)->reg_shift) +#define GPIO_PLR(gpio) (0x01 << (gpio)->reg_shift) +#define GPIO_IER(gpio) (0x02 << (gpio)->reg_shift) +#define GPIO_ISR(gpio) (0x03 << (gpio)->reg_shift) +#define GPIO_PTR(gpio) (0x04 << (gpio)->reg_shift) + +struct adnp { + struct i2c_client *client; + struct gpio_chip gpio; + unsigned int reg_shift; + + struct mutex i2c_lock; + struct mutex irq_lock; + + u8 *irq_enable; + u8 *irq_level; + u8 *irq_rise; + u8 *irq_fall; + u8 *irq_high; + u8 *irq_low; +}; + +static int adnp_read(struct adnp *adnp, unsigned offset, uint8_t *value) +{ + int err; + + err = i2c_smbus_read_byte_data(adnp->client, offset); + if (err < 0) { + dev_err(adnp->gpio.parent, "%s failed: %d\n", + "i2c_smbus_read_byte_data()", err); + return err; + } + + *value = err; + return 0; +} + +static int adnp_write(struct adnp *adnp, unsigned offset, uint8_t value) +{ + int err; + + err = i2c_smbus_write_byte_data(adnp->client, offset, value); + if (err < 0) { + dev_err(adnp->gpio.parent, "%s failed: %d\n", + "i2c_smbus_write_byte_data()", err); + return err; + } + + return 0; +} + +static int adnp_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct adnp *adnp = gpiochip_get_data(chip); + unsigned int reg = offset >> adnp->reg_shift; + unsigned int pos = offset & 7; + u8 value; + int err; + + err = adnp_read(adnp, GPIO_PLR(adnp) + reg, &value); + if (err < 0) + return err; + + return (value & BIT(pos)) ? 1 : 0; +} + +static void __adnp_gpio_set(struct adnp *adnp, unsigned offset, int value) +{ + unsigned int reg = offset >> adnp->reg_shift; + unsigned int pos = offset & 7; + int err; + u8 val; + + err = adnp_read(adnp, GPIO_PLR(adnp) + reg, &val); + if (err < 0) + return; + + if (value) + val |= BIT(pos); + else + val &= ~BIT(pos); + + adnp_write(adnp, GPIO_PLR(adnp) + reg, val); +} + +static void adnp_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct adnp *adnp = gpiochip_get_data(chip); + + mutex_lock(&adnp->i2c_lock); + __adnp_gpio_set(adnp, offset, value); + mutex_unlock(&adnp->i2c_lock); +} + +static int adnp_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct adnp *adnp = gpiochip_get_data(chip); + unsigned int reg = offset >> adnp->reg_shift; + unsigned int pos = offset & 7; + u8 value; + int err; + + mutex_lock(&adnp->i2c_lock); + + err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &value); + if (err < 0) + goto out; + + value &= ~BIT(pos); + + err = adnp_write(adnp, GPIO_DDR(adnp) + reg, value); + if (err < 0) + goto out; + + err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &value); + if (err < 0) + goto out; + + if (value & BIT(pos)) { + err = -EPERM; + goto out; + } + + err = 0; + +out: + mutex_unlock(&adnp->i2c_lock); + return err; +} + +static int adnp_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct adnp *adnp = gpiochip_get_data(chip); + unsigned int reg = offset >> adnp->reg_shift; + unsigned int pos = offset & 7; + int err; + u8 val; + + mutex_lock(&adnp->i2c_lock); + + err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &val); + if (err < 0) + goto out; + + val |= BIT(pos); + + err = adnp_write(adnp, GPIO_DDR(adnp) + reg, val); + if (err < 0) + goto out; + + err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &val); + if (err < 0) + goto out; + + if (!(val & BIT(pos))) { + err = -EPERM; + goto out; + } + + __adnp_gpio_set(adnp, offset, value); + err = 0; + +out: + mutex_unlock(&adnp->i2c_lock); + return err; +} + +static void adnp_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + struct adnp *adnp = gpiochip_get_data(chip); + unsigned int num_regs = 1 << adnp->reg_shift, i, j; + int err; + + for (i = 0; i < num_regs; i++) { + u8 ddr, plr, ier, isr; + + mutex_lock(&adnp->i2c_lock); + + err = adnp_read(adnp, GPIO_DDR(adnp) + i, &ddr); + if (err < 0) + goto unlock; + + err = adnp_read(adnp, GPIO_PLR(adnp) + i, &plr); + if (err < 0) + goto unlock; + + err = adnp_read(adnp, GPIO_IER(adnp) + i, &ier); + if (err < 0) + goto unlock; + + err = adnp_read(adnp, GPIO_ISR(adnp) + i, &isr); + if (err < 0) + goto unlock; + + mutex_unlock(&adnp->i2c_lock); + + for (j = 0; j < 8; j++) { + unsigned int bit = (i << adnp->reg_shift) + j; + const char *direction = "input "; + const char *level = "low "; + const char *interrupt = "disabled"; + const char *pending = ""; + + if (ddr & BIT(j)) + direction = "output"; + + if (plr & BIT(j)) + level = "high"; + + if (ier & BIT(j)) + interrupt = "enabled "; + + if (isr & BIT(j)) + pending = "pending"; + + seq_printf(s, "%2u: %s %s IRQ %s %s\n", bit, + direction, level, interrupt, pending); + } + } + + return; + +unlock: + mutex_unlock(&adnp->i2c_lock); +} + +static int adnp_gpio_setup(struct adnp *adnp, unsigned int num_gpios) +{ + struct gpio_chip *chip = &adnp->gpio; + int err; + + adnp->reg_shift = get_count_order(num_gpios) - 3; + + chip->direction_input = adnp_gpio_direction_input; + chip->direction_output = adnp_gpio_direction_output; + chip->get = adnp_gpio_get; + chip->set = adnp_gpio_set; + chip->can_sleep = true; + + if (IS_ENABLED(CONFIG_DEBUG_FS)) + chip->dbg_show = adnp_gpio_dbg_show; + + chip->base = -1; + chip->ngpio = num_gpios; + chip->label = adnp->client->name; + chip->parent = &adnp->client->dev; + chip->of_node = chip->parent->of_node; + chip->owner = THIS_MODULE; + + err = devm_gpiochip_add_data(&adnp->client->dev, chip, adnp); + if (err) + return err; + + return 0; +} + +static irqreturn_t adnp_irq(int irq, void *data) +{ + struct adnp *adnp = data; + unsigned int num_regs, i; + + num_regs = 1 << adnp->reg_shift; + + for (i = 0; i < num_regs; i++) { + unsigned int base = i << adnp->reg_shift, bit; + u8 changed, level, isr, ier; + unsigned long pending; + int err; + + mutex_lock(&adnp->i2c_lock); + + err = adnp_read(adnp, GPIO_PLR(adnp) + i, &level); + if (err < 0) { + mutex_unlock(&adnp->i2c_lock); + continue; + } + + err = adnp_read(adnp, GPIO_ISR(adnp) + i, &isr); + if (err < 0) { + mutex_unlock(&adnp->i2c_lock); + continue; + } + + err = adnp_read(adnp, GPIO_IER(adnp) + i, &ier); + if (err < 0) { + mutex_unlock(&adnp->i2c_lock); + continue; + } + + mutex_unlock(&adnp->i2c_lock); + + /* determine pins that changed levels */ + changed = level ^ adnp->irq_level[i]; + + /* compute edge-triggered interrupts */ + pending = changed & ((adnp->irq_fall[i] & ~level) | + (adnp->irq_rise[i] & level)); + + /* add in level-triggered interrupts */ + pending |= (adnp->irq_high[i] & level) | + (adnp->irq_low[i] & ~level); + + /* mask out non-pending and disabled interrupts */ + pending &= isr & ier; + + for_each_set_bit(bit, &pending, 8) { + unsigned int child_irq; + child_irq = irq_find_mapping(adnp->gpio.irq.domain, + base + bit); + handle_nested_irq(child_irq); + } + } + + return IRQ_HANDLED; +} + +static void adnp_irq_mask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct adnp *adnp = gpiochip_get_data(gc); + unsigned int reg = d->hwirq >> adnp->reg_shift; + unsigned int pos = d->hwirq & 7; + + adnp->irq_enable[reg] &= ~BIT(pos); +} + +static void adnp_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct adnp *adnp = gpiochip_get_data(gc); + unsigned int reg = d->hwirq >> adnp->reg_shift; + unsigned int pos = d->hwirq & 7; + + adnp->irq_enable[reg] |= BIT(pos); +} + +static int adnp_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct adnp *adnp = gpiochip_get_data(gc); + unsigned int reg = d->hwirq >> adnp->reg_shift; + unsigned int pos = d->hwirq & 7; + + if (type & IRQ_TYPE_EDGE_RISING) + adnp->irq_rise[reg] |= BIT(pos); + else + adnp->irq_rise[reg] &= ~BIT(pos); + + if (type & IRQ_TYPE_EDGE_FALLING) + adnp->irq_fall[reg] |= BIT(pos); + else + adnp->irq_fall[reg] &= ~BIT(pos); + + if (type & IRQ_TYPE_LEVEL_HIGH) + adnp->irq_high[reg] |= BIT(pos); + else + adnp->irq_high[reg] &= ~BIT(pos); + + if (type & IRQ_TYPE_LEVEL_LOW) + adnp->irq_low[reg] |= BIT(pos); + else + adnp->irq_low[reg] &= ~BIT(pos); + + return 0; +} + +static void adnp_irq_bus_lock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct adnp *adnp = gpiochip_get_data(gc); + + mutex_lock(&adnp->irq_lock); +} + +static void adnp_irq_bus_unlock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct adnp *adnp = gpiochip_get_data(gc); + unsigned int num_regs = 1 << adnp->reg_shift, i; + + mutex_lock(&adnp->i2c_lock); + + for (i = 0; i < num_regs; i++) + adnp_write(adnp, GPIO_IER(adnp) + i, adnp->irq_enable[i]); + + mutex_unlock(&adnp->i2c_lock); + mutex_unlock(&adnp->irq_lock); +} + +static struct irq_chip adnp_irq_chip = { + .name = "gpio-adnp", + .irq_mask = adnp_irq_mask, + .irq_unmask = adnp_irq_unmask, + .irq_set_type = adnp_irq_set_type, + .irq_bus_lock = adnp_irq_bus_lock, + .irq_bus_sync_unlock = adnp_irq_bus_unlock, +}; + +static int adnp_irq_setup(struct adnp *adnp) +{ + unsigned int num_regs = 1 << adnp->reg_shift, i; + struct gpio_chip *chip = &adnp->gpio; + int err; + + mutex_init(&adnp->irq_lock); + + /* + * Allocate memory to keep track of the current level and trigger + * modes of the interrupts. To avoid multiple allocations, a single + * large buffer is allocated and pointers are setup to point at the + * corresponding offsets. For consistency, the layout of the buffer + * is chosen to match the register layout of the hardware in that + * each segment contains the corresponding bits for all interrupts. + */ + adnp->irq_enable = devm_kcalloc(chip->parent, num_regs, 6, + GFP_KERNEL); + if (!adnp->irq_enable) + return -ENOMEM; + + adnp->irq_level = adnp->irq_enable + (num_regs * 1); + adnp->irq_rise = adnp->irq_enable + (num_regs * 2); + adnp->irq_fall = adnp->irq_enable + (num_regs * 3); + adnp->irq_high = adnp->irq_enable + (num_regs * 4); + adnp->irq_low = adnp->irq_enable + (num_regs * 5); + + for (i = 0; i < num_regs; i++) { + /* + * Read the initial level of all pins to allow the emulation + * of edge triggered interrupts. + */ + err = adnp_read(adnp, GPIO_PLR(adnp) + i, &adnp->irq_level[i]); + if (err < 0) + return err; + + /* disable all interrupts */ + err = adnp_write(adnp, GPIO_IER(adnp) + i, 0); + if (err < 0) + return err; + + adnp->irq_enable[i] = 0x00; + } + + err = devm_request_threaded_irq(chip->parent, adnp->client->irq, + NULL, adnp_irq, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + dev_name(chip->parent), adnp); + if (err != 0) { + dev_err(chip->parent, "can't request IRQ#%d: %d\n", + adnp->client->irq, err); + return err; + } + + err = gpiochip_irqchip_add_nested(chip, + &adnp_irq_chip, + 0, + handle_simple_irq, + IRQ_TYPE_NONE); + if (err) { + dev_err(chip->parent, + "could not connect irqchip to gpiochip\n"); + return err; + } + + gpiochip_set_nested_irqchip(chip, &adnp_irq_chip, adnp->client->irq); + + return 0; +} + +static int adnp_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *np = client->dev.of_node; + struct adnp *adnp; + u32 num_gpios; + int err; + + err = of_property_read_u32(np, "nr-gpios", &num_gpios); + if (err < 0) + return err; + + client->irq = irq_of_parse_and_map(np, 0); + if (!client->irq) + return -EPROBE_DEFER; + + adnp = devm_kzalloc(&client->dev, sizeof(*adnp), GFP_KERNEL); + if (!adnp) + return -ENOMEM; + + mutex_init(&adnp->i2c_lock); + adnp->client = client; + + err = adnp_gpio_setup(adnp, num_gpios); + if (err) + return err; + + if (of_find_property(np, "interrupt-controller", NULL)) { + err = adnp_irq_setup(adnp); + if (err) + return err; + } + + i2c_set_clientdata(client, adnp); + + return 0; +} + +static const struct i2c_device_id adnp_i2c_id[] = { + { "gpio-adnp" }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, adnp_i2c_id); + +static const struct of_device_id adnp_of_match[] = { + { .compatible = "ad,gpio-adnp", }, + { }, +}; +MODULE_DEVICE_TABLE(of, adnp_of_match); + +static struct i2c_driver adnp_i2c_driver = { + .driver = { + .name = "gpio-adnp", + .of_match_table = adnp_of_match, + }, + .probe = adnp_i2c_probe, + .id_table = adnp_i2c_id, +}; +module_i2c_driver(adnp_i2c_driver); + +MODULE_DESCRIPTION("Avionic Design N-bit GPIO expander"); +MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-adp5520.c b/drivers/gpio/gpio-adp5520.c new file mode 100644 index 000000000..21452622d --- /dev/null +++ b/drivers/gpio/gpio-adp5520.c @@ -0,0 +1,178 @@ +/* + * GPIO driver for Analog Devices ADP5520 MFD PMICs + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mfd/adp5520.h> +#include <linux/gpio/driver.h> + +struct adp5520_gpio { + struct device *master; + struct gpio_chip gpio_chip; + unsigned char lut[ADP5520_MAXGPIOS]; + unsigned long output; +}; + +static int adp5520_gpio_get_value(struct gpio_chip *chip, unsigned off) +{ + struct adp5520_gpio *dev; + uint8_t reg_val; + + dev = gpiochip_get_data(chip); + + /* + * There are dedicated registers for GPIO IN/OUT. + * Make sure we return the right value, even when configured as output + */ + + if (test_bit(off, &dev->output)) + adp5520_read(dev->master, ADP5520_GPIO_OUT, ®_val); + else + adp5520_read(dev->master, ADP5520_GPIO_IN, ®_val); + + return !!(reg_val & dev->lut[off]); +} + +static void adp5520_gpio_set_value(struct gpio_chip *chip, + unsigned off, int val) +{ + struct adp5520_gpio *dev; + dev = gpiochip_get_data(chip); + + if (val) + adp5520_set_bits(dev->master, ADP5520_GPIO_OUT, dev->lut[off]); + else + adp5520_clr_bits(dev->master, ADP5520_GPIO_OUT, dev->lut[off]); +} + +static int adp5520_gpio_direction_input(struct gpio_chip *chip, unsigned off) +{ + struct adp5520_gpio *dev; + dev = gpiochip_get_data(chip); + + clear_bit(off, &dev->output); + + return adp5520_clr_bits(dev->master, ADP5520_GPIO_CFG_2, + dev->lut[off]); +} + +static int adp5520_gpio_direction_output(struct gpio_chip *chip, + unsigned off, int val) +{ + struct adp5520_gpio *dev; + int ret = 0; + dev = gpiochip_get_data(chip); + + set_bit(off, &dev->output); + + if (val) + ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_OUT, + dev->lut[off]); + else + ret |= adp5520_clr_bits(dev->master, ADP5520_GPIO_OUT, + dev->lut[off]); + + ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_CFG_2, + dev->lut[off]); + + return ret; +} + +static int adp5520_gpio_probe(struct platform_device *pdev) +{ + struct adp5520_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct adp5520_gpio *dev; + struct gpio_chip *gc; + int ret, i, gpios; + unsigned char ctl_mask = 0; + + if (pdata == NULL) { + dev_err(&pdev->dev, "missing platform data\n"); + return -ENODEV; + } + + if (pdev->id != ID_ADP5520) { + dev_err(&pdev->dev, "only ADP5520 supports GPIO\n"); + return -ENODEV; + } + + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); + if (dev == NULL) + return -ENOMEM; + + dev->master = pdev->dev.parent; + + for (gpios = 0, i = 0; i < ADP5520_MAXGPIOS; i++) + if (pdata->gpio_en_mask & (1 << i)) + dev->lut[gpios++] = 1 << i; + + if (gpios < 1) { + ret = -EINVAL; + goto err; + } + + gc = &dev->gpio_chip; + gc->direction_input = adp5520_gpio_direction_input; + gc->direction_output = adp5520_gpio_direction_output; + gc->get = adp5520_gpio_get_value; + gc->set = adp5520_gpio_set_value; + gc->can_sleep = true; + + gc->base = pdata->gpio_start; + gc->ngpio = gpios; + gc->label = pdev->name; + gc->owner = THIS_MODULE; + + ret = adp5520_clr_bits(dev->master, ADP5520_GPIO_CFG_1, + pdata->gpio_en_mask); + + if (pdata->gpio_en_mask & ADP5520_GPIO_C3) + ctl_mask |= ADP5520_C3_MODE; + + if (pdata->gpio_en_mask & ADP5520_GPIO_R3) + ctl_mask |= ADP5520_R3_MODE; + + if (ctl_mask) + ret = adp5520_set_bits(dev->master, ADP5520_LED_CONTROL, + ctl_mask); + + ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_PULLUP, + pdata->gpio_pullup_mask); + + if (ret) { + dev_err(&pdev->dev, "failed to write\n"); + goto err; + } + + ret = devm_gpiochip_add_data(&pdev->dev, &dev->gpio_chip, dev); + if (ret) + goto err; + + platform_set_drvdata(pdev, dev); + return 0; + +err: + return ret; +} + +static struct platform_driver adp5520_gpio_driver = { + .driver = { + .name = "adp5520-gpio", + }, + .probe = adp5520_gpio_probe, +}; + +module_platform_driver(adp5520_gpio_driver); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("GPIO ADP5520 Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:adp5520-gpio"); diff --git a/drivers/gpio/gpio-adp5588.c b/drivers/gpio/gpio-adp5588.c new file mode 100644 index 000000000..da9781a2e --- /dev/null +++ b/drivers/gpio/gpio-adp5588.c @@ -0,0 +1,499 @@ +/* + * GPIO Chip driver for Analog Devices + * ADP5588/ADP5587 I/O Expander and QWERTY Keypad Controller + * + * Copyright 2009-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <linux/platform_data/adp5588.h> + +#define DRV_NAME "adp5588-gpio" + +/* + * Early pre 4.0 Silicon required to delay readout by at least 25ms, + * since the Event Counter Register updated 25ms after the interrupt + * asserted. + */ +#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4) + +struct adp5588_gpio { + struct i2c_client *client; + struct gpio_chip gpio_chip; + struct mutex lock; /* protect cached dir, dat_out */ + /* protect serialized access to the interrupt controller bus */ + struct mutex irq_lock; + unsigned gpio_start; + unsigned irq_base; + uint8_t dat_out[3]; + uint8_t dir[3]; + uint8_t int_lvl[3]; + uint8_t int_en[3]; + uint8_t irq_mask[3]; + uint8_t irq_stat[3]; + uint8_t int_input_en[3]; + uint8_t int_lvl_cached[3]; +}; + +static int adp5588_gpio_read(struct i2c_client *client, u8 reg) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + dev_err(&client->dev, "Read Error\n"); + + return ret; +} + +static int adp5588_gpio_write(struct i2c_client *client, u8 reg, u8 val) +{ + int ret = i2c_smbus_write_byte_data(client, reg, val); + + if (ret < 0) + dev_err(&client->dev, "Write Error\n"); + + return ret; +} + +static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off) +{ + struct adp5588_gpio *dev = gpiochip_get_data(chip); + unsigned bank = ADP5588_BANK(off); + unsigned bit = ADP5588_BIT(off); + int val; + + mutex_lock(&dev->lock); + + if (dev->dir[bank] & bit) + val = dev->dat_out[bank]; + else + val = adp5588_gpio_read(dev->client, GPIO_DAT_STAT1 + bank); + + mutex_unlock(&dev->lock); + + return !!(val & bit); +} + +static void adp5588_gpio_set_value(struct gpio_chip *chip, + unsigned off, int val) +{ + unsigned bank, bit; + struct adp5588_gpio *dev = gpiochip_get_data(chip); + + bank = ADP5588_BANK(off); + bit = ADP5588_BIT(off); + + mutex_lock(&dev->lock); + if (val) + dev->dat_out[bank] |= bit; + else + dev->dat_out[bank] &= ~bit; + + adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank, + dev->dat_out[bank]); + mutex_unlock(&dev->lock); +} + +static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off) +{ + int ret; + unsigned bank; + struct adp5588_gpio *dev = gpiochip_get_data(chip); + + bank = ADP5588_BANK(off); + + mutex_lock(&dev->lock); + dev->dir[bank] &= ~ADP5588_BIT(off); + ret = adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, dev->dir[bank]); + mutex_unlock(&dev->lock); + + return ret; +} + +static int adp5588_gpio_direction_output(struct gpio_chip *chip, + unsigned off, int val) +{ + int ret; + unsigned bank, bit; + struct adp5588_gpio *dev = gpiochip_get_data(chip); + + bank = ADP5588_BANK(off); + bit = ADP5588_BIT(off); + + mutex_lock(&dev->lock); + dev->dir[bank] |= bit; + + if (val) + dev->dat_out[bank] |= bit; + else + dev->dat_out[bank] &= ~bit; + + ret = adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank, + dev->dat_out[bank]); + ret |= adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, + dev->dir[bank]); + mutex_unlock(&dev->lock); + + return ret; +} + +#ifdef CONFIG_GPIO_ADP5588_IRQ +static int adp5588_gpio_to_irq(struct gpio_chip *chip, unsigned off) +{ + struct adp5588_gpio *dev = gpiochip_get_data(chip); + + return dev->irq_base + off; +} + +static void adp5588_irq_bus_lock(struct irq_data *d) +{ + struct adp5588_gpio *dev = irq_data_get_irq_chip_data(d); + + mutex_lock(&dev->irq_lock); +} + + /* + * genirq core code can issue chip->mask/unmask from atomic context. + * This doesn't work for slow busses where an access needs to sleep. + * bus_sync_unlock() is therefore called outside the atomic context, + * syncs the current irq mask state with the slow external controller + * and unlocks the bus. + */ + +static void adp5588_irq_bus_sync_unlock(struct irq_data *d) +{ + struct adp5588_gpio *dev = irq_data_get_irq_chip_data(d); + int i; + + for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) { + if (dev->int_input_en[i]) { + mutex_lock(&dev->lock); + dev->dir[i] &= ~dev->int_input_en[i]; + dev->int_input_en[i] = 0; + adp5588_gpio_write(dev->client, GPIO_DIR1 + i, + dev->dir[i]); + mutex_unlock(&dev->lock); + } + + if (dev->int_lvl_cached[i] != dev->int_lvl[i]) { + dev->int_lvl_cached[i] = dev->int_lvl[i]; + adp5588_gpio_write(dev->client, GPIO_INT_LVL1 + i, + dev->int_lvl[i]); + } + + if (dev->int_en[i] ^ dev->irq_mask[i]) { + dev->int_en[i] = dev->irq_mask[i]; + adp5588_gpio_write(dev->client, GPIO_INT_EN1 + i, + dev->int_en[i]); + } + } + + mutex_unlock(&dev->irq_lock); +} + +static void adp5588_irq_mask(struct irq_data *d) +{ + struct adp5588_gpio *dev = irq_data_get_irq_chip_data(d); + unsigned gpio = d->irq - dev->irq_base; + + dev->irq_mask[ADP5588_BANK(gpio)] &= ~ADP5588_BIT(gpio); +} + +static void adp5588_irq_unmask(struct irq_data *d) +{ + struct adp5588_gpio *dev = irq_data_get_irq_chip_data(d); + unsigned gpio = d->irq - dev->irq_base; + + dev->irq_mask[ADP5588_BANK(gpio)] |= ADP5588_BIT(gpio); +} + +static int adp5588_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct adp5588_gpio *dev = irq_data_get_irq_chip_data(d); + uint16_t gpio = d->irq - dev->irq_base; + unsigned bank, bit; + + if ((type & IRQ_TYPE_EDGE_BOTH)) { + dev_err(&dev->client->dev, "irq %d: unsupported type %d\n", + d->irq, type); + return -EINVAL; + } + + bank = ADP5588_BANK(gpio); + bit = ADP5588_BIT(gpio); + + if (type & IRQ_TYPE_LEVEL_HIGH) + dev->int_lvl[bank] |= bit; + else if (type & IRQ_TYPE_LEVEL_LOW) + dev->int_lvl[bank] &= ~bit; + else + return -EINVAL; + + dev->int_input_en[bank] |= bit; + + return 0; +} + +static struct irq_chip adp5588_irq_chip = { + .name = "adp5588", + .irq_mask = adp5588_irq_mask, + .irq_unmask = adp5588_irq_unmask, + .irq_bus_lock = adp5588_irq_bus_lock, + .irq_bus_sync_unlock = adp5588_irq_bus_sync_unlock, + .irq_set_type = adp5588_irq_set_type, +}; + +static int adp5588_gpio_read_intstat(struct i2c_client *client, u8 *buf) +{ + int ret = i2c_smbus_read_i2c_block_data(client, GPIO_INT_STAT1, 3, buf); + + if (ret < 0) + dev_err(&client->dev, "Read INT_STAT Error\n"); + + return ret; +} + +static irqreturn_t adp5588_irq_handler(int irq, void *devid) +{ + struct adp5588_gpio *dev = devid; + unsigned status, bank, bit, pending; + int ret; + status = adp5588_gpio_read(dev->client, INT_STAT); + + if (status & ADP5588_GPI_INT) { + ret = adp5588_gpio_read_intstat(dev->client, dev->irq_stat); + if (ret < 0) + memset(dev->irq_stat, 0, ARRAY_SIZE(dev->irq_stat)); + + for (bank = 0, bit = 0; bank <= ADP5588_BANK(ADP5588_MAXGPIO); + bank++, bit = 0) { + pending = dev->irq_stat[bank] & dev->irq_mask[bank]; + + while (pending) { + if (pending & (1 << bit)) { + handle_nested_irq(dev->irq_base + + (bank << 3) + bit); + pending &= ~(1 << bit); + + } + bit++; + } + } + } + + adp5588_gpio_write(dev->client, INT_STAT, status); /* Status is W1C */ + + return IRQ_HANDLED; +} + +static int adp5588_irq_setup(struct adp5588_gpio *dev) +{ + struct i2c_client *client = dev->client; + struct adp5588_gpio_platform_data *pdata = + dev_get_platdata(&client->dev); + unsigned gpio; + int ret; + + adp5588_gpio_write(client, CFG, ADP5588_AUTO_INC); + adp5588_gpio_write(client, INT_STAT, -1); /* status is W1C */ + adp5588_gpio_read_intstat(client, dev->irq_stat); /* read to clear */ + + dev->irq_base = pdata->irq_base; + mutex_init(&dev->irq_lock); + + for (gpio = 0; gpio < dev->gpio_chip.ngpio; gpio++) { + int irq = gpio + dev->irq_base; + irq_set_chip_data(irq, dev); + irq_set_chip_and_handler(irq, &adp5588_irq_chip, + handle_level_irq); + irq_set_nested_thread(irq, 1); + irq_modify_status(irq, IRQ_NOREQUEST, IRQ_NOPROBE); + } + + ret = request_threaded_irq(client->irq, + NULL, + adp5588_irq_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(&client->dev), dev); + if (ret) { + dev_err(&client->dev, "failed to request irq %d\n", + client->irq); + goto out; + } + + dev->gpio_chip.to_irq = adp5588_gpio_to_irq; + adp5588_gpio_write(client, CFG, + ADP5588_AUTO_INC | ADP5588_INT_CFG | ADP5588_GPI_INT); + + return 0; + +out: + dev->irq_base = 0; + return ret; +} + +static void adp5588_irq_teardown(struct adp5588_gpio *dev) +{ + if (dev->irq_base) + free_irq(dev->client->irq, dev); +} + +#else +static int adp5588_irq_setup(struct adp5588_gpio *dev) +{ + struct i2c_client *client = dev->client; + dev_warn(&client->dev, "interrupt support not compiled in\n"); + + return 0; +} + +static void adp5588_irq_teardown(struct adp5588_gpio *dev) +{ +} +#endif /* CONFIG_GPIO_ADP5588_IRQ */ + +static int adp5588_gpio_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adp5588_gpio_platform_data *pdata = + dev_get_platdata(&client->dev); + struct adp5588_gpio *dev; + struct gpio_chip *gc; + int ret, i, revid; + + if (!pdata) { + dev_err(&client->dev, "missing platform data\n"); + return -ENODEV; + } + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); + return -EIO; + } + + dev = devm_kzalloc(&client->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + dev->client = client; + + gc = &dev->gpio_chip; + gc->direction_input = adp5588_gpio_direction_input; + gc->direction_output = adp5588_gpio_direction_output; + gc->get = adp5588_gpio_get_value; + gc->set = adp5588_gpio_set_value; + gc->can_sleep = true; + + gc->base = pdata->gpio_start; + gc->ngpio = ADP5588_MAXGPIO; + gc->label = client->name; + gc->owner = THIS_MODULE; + gc->names = pdata->names; + + mutex_init(&dev->lock); + + ret = adp5588_gpio_read(dev->client, DEV_ID); + if (ret < 0) + goto err; + + revid = ret & ADP5588_DEVICE_ID_MASK; + + for (i = 0, ret = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) { + dev->dat_out[i] = adp5588_gpio_read(client, GPIO_DAT_OUT1 + i); + dev->dir[i] = adp5588_gpio_read(client, GPIO_DIR1 + i); + ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0); + ret |= adp5588_gpio_write(client, GPIO_PULL1 + i, + (pdata->pullup_dis_mask >> (8 * i)) & 0xFF); + ret |= adp5588_gpio_write(client, GPIO_INT_EN1 + i, 0); + if (ret) + goto err; + } + + if (pdata->irq_base) { + if (WA_DELAYED_READOUT_REVID(revid)) { + dev_warn(&client->dev, "GPIO int not supported\n"); + } else { + ret = adp5588_irq_setup(dev); + if (ret) + goto err; + } + } + + ret = devm_gpiochip_add_data(&client->dev, &dev->gpio_chip, dev); + if (ret) + goto err_irq; + + dev_info(&client->dev, "IRQ Base: %d Rev.: %d\n", + pdata->irq_base, revid); + + if (pdata->setup) { + ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context); + if (ret < 0) + dev_warn(&client->dev, "setup failed, %d\n", ret); + } + + i2c_set_clientdata(client, dev); + + return 0; + +err_irq: + adp5588_irq_teardown(dev); +err: + return ret; +} + +static int adp5588_gpio_remove(struct i2c_client *client) +{ + struct adp5588_gpio_platform_data *pdata = + dev_get_platdata(&client->dev); + struct adp5588_gpio *dev = i2c_get_clientdata(client); + int ret; + + if (pdata->teardown) { + ret = pdata->teardown(client, + dev->gpio_chip.base, dev->gpio_chip.ngpio, + pdata->context); + if (ret < 0) { + dev_err(&client->dev, "teardown failed %d\n", ret); + return ret; + } + } + + if (dev->irq_base) + free_irq(dev->client->irq, dev); + + return 0; +} + +static const struct i2c_device_id adp5588_gpio_id[] = { + {DRV_NAME, 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, adp5588_gpio_id); + +static struct i2c_driver adp5588_gpio_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = adp5588_gpio_probe, + .remove = adp5588_gpio_remove, + .id_table = adp5588_gpio_id, +}; + +module_i2c_driver(adp5588_gpio_driver); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("GPIO ADP5588 Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-altera-a10sr.c b/drivers/gpio/gpio-altera-a10sr.c new file mode 100644 index 000000000..7f9e0304b --- /dev/null +++ b/drivers/gpio/gpio-altera-a10sr.c @@ -0,0 +1,132 @@ +/* + * Copyright Intel Corporation (C) 2014-2016. All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + * + * GPIO driver for Altera Arria10 MAX5 System Resource Chip + * + * Adapted from gpio-tps65910.c + */ + +#include <linux/gpio/driver.h> +#include <linux/mfd/altera-a10sr.h> +#include <linux/module.h> + +/** + * struct altr_a10sr_gpio - Altera Max5 GPIO device private data structure + * @gp: : instance of the gpio_chip + * @regmap: the regmap from the parent device. + */ +struct altr_a10sr_gpio { + struct gpio_chip gp; + struct regmap *regmap; +}; + +static int altr_a10sr_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct altr_a10sr_gpio *gpio = gpiochip_get_data(chip); + int ret, val; + + ret = regmap_read(gpio->regmap, ALTR_A10SR_PBDSW_REG, &val); + if (ret < 0) + return ret; + + return !!(val & BIT(offset - ALTR_A10SR_LED_VALID_SHIFT)); +} + +static void altr_a10sr_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct altr_a10sr_gpio *gpio = gpiochip_get_data(chip); + + regmap_update_bits(gpio->regmap, ALTR_A10SR_LED_REG, + BIT(ALTR_A10SR_LED_VALID_SHIFT + offset), + value ? BIT(ALTR_A10SR_LED_VALID_SHIFT + offset) + : 0); +} + +static int altr_a10sr_gpio_direction_input(struct gpio_chip *gc, + unsigned int nr) +{ + if (nr >= (ALTR_A10SR_IN_VALID_RANGE_LO - ALTR_A10SR_LED_VALID_SHIFT)) + return 0; + return -EINVAL; +} + +static int altr_a10sr_gpio_direction_output(struct gpio_chip *gc, + unsigned int nr, int value) +{ + if (nr <= (ALTR_A10SR_OUT_VALID_RANGE_HI - ALTR_A10SR_LED_VALID_SHIFT)) { + altr_a10sr_gpio_set(gc, nr, value); + return 0; + } + return -EINVAL; +} + +static const struct gpio_chip altr_a10sr_gc = { + .label = "altr_a10sr_gpio", + .owner = THIS_MODULE, + .get = altr_a10sr_gpio_get, + .set = altr_a10sr_gpio_set, + .direction_input = altr_a10sr_gpio_direction_input, + .direction_output = altr_a10sr_gpio_direction_output, + .can_sleep = true, + .ngpio = 12, + .base = -1, +}; + +static int altr_a10sr_gpio_probe(struct platform_device *pdev) +{ + struct altr_a10sr_gpio *gpio; + int ret; + struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent); + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + gpio->regmap = a10sr->regmap; + + gpio->gp = altr_a10sr_gc; + gpio->gp.parent = pdev->dev.parent; + gpio->gp.of_node = pdev->dev.of_node; + + ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, gpio); + + return 0; +} + +static const struct of_device_id altr_a10sr_gpio_of_match[] = { + { .compatible = "altr,a10sr-gpio" }, + { }, +}; +MODULE_DEVICE_TABLE(of, altr_a10sr_gpio_of_match); + +static struct platform_driver altr_a10sr_gpio_driver = { + .probe = altr_a10sr_gpio_probe, + .driver = { + .name = "altr_a10sr_gpio", + .of_match_table = of_match_ptr(altr_a10sr_gpio_of_match), + }, +}; +module_platform_driver(altr_a10sr_gpio_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Thor Thayer <tthayer@opensource.altera.com>"); +MODULE_DESCRIPTION("Altera Arria10 System Resource Chip GPIO"); diff --git a/drivers/gpio/gpio-altera.c b/drivers/gpio/gpio-altera.c new file mode 100644 index 000000000..8c3ff6e23 --- /dev/null +++ b/drivers/gpio/gpio-altera.c @@ -0,0 +1,372 @@ +/* + * Copyright (C) 2013 Altera Corporation + * Based on gpio-mpc8xxx.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/gpio/driver.h> +#include <linux/of_gpio.h> /* For of_mm_gpio_chip */ +#include <linux/platform_device.h> + +#define ALTERA_GPIO_MAX_NGPIO 32 +#define ALTERA_GPIO_DATA 0x0 +#define ALTERA_GPIO_DIR 0x4 +#define ALTERA_GPIO_IRQ_MASK 0x8 +#define ALTERA_GPIO_EDGE_CAP 0xc + +/** +* struct altera_gpio_chip +* @mmchip : memory mapped chip structure. +* @gpio_lock : synchronization lock so that new irq/set/get requests + will be blocked until the current one completes. +* @interrupt_trigger : specifies the hardware configured IRQ trigger type + (rising, falling, both, high) +* @mapped_irq : kernel mapped irq number. +*/ +struct altera_gpio_chip { + struct of_mm_gpio_chip mmchip; + raw_spinlock_t gpio_lock; + int interrupt_trigger; + int mapped_irq; +}; + +static void altera_gpio_irq_unmask(struct irq_data *d) +{ + struct altera_gpio_chip *altera_gc; + struct of_mm_gpio_chip *mm_gc; + unsigned long flags; + u32 intmask; + + altera_gc = gpiochip_get_data(irq_data_get_irq_chip_data(d)); + mm_gc = &altera_gc->mmchip; + + raw_spin_lock_irqsave(&altera_gc->gpio_lock, flags); + intmask = readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK); + /* Set ALTERA_GPIO_IRQ_MASK bit to unmask */ + intmask |= BIT(irqd_to_hwirq(d)); + writel(intmask, mm_gc->regs + ALTERA_GPIO_IRQ_MASK); + raw_spin_unlock_irqrestore(&altera_gc->gpio_lock, flags); +} + +static void altera_gpio_irq_mask(struct irq_data *d) +{ + struct altera_gpio_chip *altera_gc; + struct of_mm_gpio_chip *mm_gc; + unsigned long flags; + u32 intmask; + + altera_gc = gpiochip_get_data(irq_data_get_irq_chip_data(d)); + mm_gc = &altera_gc->mmchip; + + raw_spin_lock_irqsave(&altera_gc->gpio_lock, flags); + intmask = readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK); + /* Clear ALTERA_GPIO_IRQ_MASK bit to mask */ + intmask &= ~BIT(irqd_to_hwirq(d)); + writel(intmask, mm_gc->regs + ALTERA_GPIO_IRQ_MASK); + raw_spin_unlock_irqrestore(&altera_gc->gpio_lock, flags); +} + +/** + * This controller's IRQ type is synthesized in hardware, so this function + * just checks if the requested set_type matches the synthesized IRQ type + */ +static int altera_gpio_irq_set_type(struct irq_data *d, + unsigned int type) +{ + struct altera_gpio_chip *altera_gc; + + altera_gc = gpiochip_get_data(irq_data_get_irq_chip_data(d)); + + if (type == IRQ_TYPE_NONE) { + irq_set_handler_locked(d, handle_bad_irq); + return 0; + } + if (type == altera_gc->interrupt_trigger) { + if (type == IRQ_TYPE_LEVEL_HIGH) + irq_set_handler_locked(d, handle_level_irq); + else + irq_set_handler_locked(d, handle_simple_irq); + return 0; + } + irq_set_handler_locked(d, handle_bad_irq); + return -EINVAL; +} + +static unsigned int altera_gpio_irq_startup(struct irq_data *d) +{ + altera_gpio_irq_unmask(d); + + return 0; +} + +static struct irq_chip altera_irq_chip = { + .name = "altera-gpio", + .irq_mask = altera_gpio_irq_mask, + .irq_unmask = altera_gpio_irq_unmask, + .irq_set_type = altera_gpio_irq_set_type, + .irq_startup = altera_gpio_irq_startup, + .irq_shutdown = altera_gpio_irq_mask, +}; + +static int altera_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct of_mm_gpio_chip *mm_gc; + + mm_gc = to_of_mm_gpio_chip(gc); + + return !!(readl(mm_gc->regs + ALTERA_GPIO_DATA) & BIT(offset)); +} + +static void altera_gpio_set(struct gpio_chip *gc, unsigned offset, int value) +{ + struct of_mm_gpio_chip *mm_gc; + struct altera_gpio_chip *chip; + unsigned long flags; + unsigned int data_reg; + + mm_gc = to_of_mm_gpio_chip(gc); + chip = gpiochip_get_data(gc); + + raw_spin_lock_irqsave(&chip->gpio_lock, flags); + data_reg = readl(mm_gc->regs + ALTERA_GPIO_DATA); + if (value) + data_reg |= BIT(offset); + else + data_reg &= ~BIT(offset); + writel(data_reg, mm_gc->regs + ALTERA_GPIO_DATA); + raw_spin_unlock_irqrestore(&chip->gpio_lock, flags); +} + +static int altera_gpio_direction_input(struct gpio_chip *gc, unsigned offset) +{ + struct of_mm_gpio_chip *mm_gc; + struct altera_gpio_chip *chip; + unsigned long flags; + unsigned int gpio_ddr; + + mm_gc = to_of_mm_gpio_chip(gc); + chip = gpiochip_get_data(gc); + + raw_spin_lock_irqsave(&chip->gpio_lock, flags); + /* Set pin as input, assumes software controlled IP */ + gpio_ddr = readl(mm_gc->regs + ALTERA_GPIO_DIR); + gpio_ddr &= ~BIT(offset); + writel(gpio_ddr, mm_gc->regs + ALTERA_GPIO_DIR); + raw_spin_unlock_irqrestore(&chip->gpio_lock, flags); + + return 0; +} + +static int altera_gpio_direction_output(struct gpio_chip *gc, + unsigned offset, int value) +{ + struct of_mm_gpio_chip *mm_gc; + struct altera_gpio_chip *chip; + unsigned long flags; + unsigned int data_reg, gpio_ddr; + + mm_gc = to_of_mm_gpio_chip(gc); + chip = gpiochip_get_data(gc); + + raw_spin_lock_irqsave(&chip->gpio_lock, flags); + /* Sets the GPIO value */ + data_reg = readl(mm_gc->regs + ALTERA_GPIO_DATA); + if (value) + data_reg |= BIT(offset); + else + data_reg &= ~BIT(offset); + writel(data_reg, mm_gc->regs + ALTERA_GPIO_DATA); + + /* Set pin as output, assumes software controlled IP */ + gpio_ddr = readl(mm_gc->regs + ALTERA_GPIO_DIR); + gpio_ddr |= BIT(offset); + writel(gpio_ddr, mm_gc->regs + ALTERA_GPIO_DIR); + raw_spin_unlock_irqrestore(&chip->gpio_lock, flags); + + return 0; +} + +static void altera_gpio_irq_edge_handler(struct irq_desc *desc) +{ + struct altera_gpio_chip *altera_gc; + struct irq_chip *chip; + struct of_mm_gpio_chip *mm_gc; + struct irq_domain *irqdomain; + unsigned long status; + int i; + + altera_gc = gpiochip_get_data(irq_desc_get_handler_data(desc)); + chip = irq_desc_get_chip(desc); + mm_gc = &altera_gc->mmchip; + irqdomain = altera_gc->mmchip.gc.irq.domain; + + chained_irq_enter(chip, desc); + + while ((status = + (readl(mm_gc->regs + ALTERA_GPIO_EDGE_CAP) & + readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK)))) { + writel(status, mm_gc->regs + ALTERA_GPIO_EDGE_CAP); + for_each_set_bit(i, &status, mm_gc->gc.ngpio) { + generic_handle_irq(irq_find_mapping(irqdomain, i)); + } + } + + chained_irq_exit(chip, desc); +} + +static void altera_gpio_irq_leveL_high_handler(struct irq_desc *desc) +{ + struct altera_gpio_chip *altera_gc; + struct irq_chip *chip; + struct of_mm_gpio_chip *mm_gc; + struct irq_domain *irqdomain; + unsigned long status; + int i; + + altera_gc = gpiochip_get_data(irq_desc_get_handler_data(desc)); + chip = irq_desc_get_chip(desc); + mm_gc = &altera_gc->mmchip; + irqdomain = altera_gc->mmchip.gc.irq.domain; + + chained_irq_enter(chip, desc); + + status = readl(mm_gc->regs + ALTERA_GPIO_DATA); + status &= readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK); + + for_each_set_bit(i, &status, mm_gc->gc.ngpio) { + generic_handle_irq(irq_find_mapping(irqdomain, i)); + } + chained_irq_exit(chip, desc); +} + +static int altera_gpio_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + int reg, ret; + struct altera_gpio_chip *altera_gc; + + altera_gc = devm_kzalloc(&pdev->dev, sizeof(*altera_gc), GFP_KERNEL); + if (!altera_gc) + return -ENOMEM; + + raw_spin_lock_init(&altera_gc->gpio_lock); + + if (of_property_read_u32(node, "altr,ngpio", ®)) + /* By default assume maximum ngpio */ + altera_gc->mmchip.gc.ngpio = ALTERA_GPIO_MAX_NGPIO; + else + altera_gc->mmchip.gc.ngpio = reg; + + if (altera_gc->mmchip.gc.ngpio > ALTERA_GPIO_MAX_NGPIO) { + dev_warn(&pdev->dev, + "ngpio is greater than %d, defaulting to %d\n", + ALTERA_GPIO_MAX_NGPIO, ALTERA_GPIO_MAX_NGPIO); + altera_gc->mmchip.gc.ngpio = ALTERA_GPIO_MAX_NGPIO; + } + + altera_gc->mmchip.gc.direction_input = altera_gpio_direction_input; + altera_gc->mmchip.gc.direction_output = altera_gpio_direction_output; + altera_gc->mmchip.gc.get = altera_gpio_get; + altera_gc->mmchip.gc.set = altera_gpio_set; + altera_gc->mmchip.gc.owner = THIS_MODULE; + altera_gc->mmchip.gc.parent = &pdev->dev; + + ret = of_mm_gpiochip_add_data(node, &altera_gc->mmchip, altera_gc); + if (ret) { + dev_err(&pdev->dev, "Failed adding memory mapped gpiochip\n"); + return ret; + } + + platform_set_drvdata(pdev, altera_gc); + + altera_gc->mapped_irq = platform_get_irq(pdev, 0); + + if (altera_gc->mapped_irq < 0) + goto skip_irq; + + if (of_property_read_u32(node, "altr,interrupt-type", ®)) { + ret = -EINVAL; + dev_err(&pdev->dev, + "altr,interrupt-type value not set in device tree\n"); + goto teardown; + } + altera_gc->interrupt_trigger = reg; + + ret = gpiochip_irqchip_add(&altera_gc->mmchip.gc, &altera_irq_chip, 0, + handle_bad_irq, IRQ_TYPE_NONE); + + if (ret) { + dev_err(&pdev->dev, "could not add irqchip\n"); + goto teardown; + } + + gpiochip_set_chained_irqchip(&altera_gc->mmchip.gc, + &altera_irq_chip, + altera_gc->mapped_irq, + altera_gc->interrupt_trigger == IRQ_TYPE_LEVEL_HIGH ? + altera_gpio_irq_leveL_high_handler : + altera_gpio_irq_edge_handler); + +skip_irq: + return 0; +teardown: + of_mm_gpiochip_remove(&altera_gc->mmchip); + pr_err("%pOF: registration failed with status %d\n", + node, ret); + + return ret; +} + +static int altera_gpio_remove(struct platform_device *pdev) +{ + struct altera_gpio_chip *altera_gc = platform_get_drvdata(pdev); + + of_mm_gpiochip_remove(&altera_gc->mmchip); + + return 0; +} + +static const struct of_device_id altera_gpio_of_match[] = { + { .compatible = "altr,pio-1.0", }, + {}, +}; +MODULE_DEVICE_TABLE(of, altera_gpio_of_match); + +static struct platform_driver altera_gpio_driver = { + .driver = { + .name = "altera_gpio", + .of_match_table = of_match_ptr(altera_gpio_of_match), + }, + .probe = altera_gpio_probe, + .remove = altera_gpio_remove, +}; + +static int __init altera_gpio_init(void) +{ + return platform_driver_register(&altera_gpio_driver); +} +subsys_initcall(altera_gpio_init); + +static void __exit altera_gpio_exit(void) +{ + platform_driver_unregister(&altera_gpio_driver); +} +module_exit(altera_gpio_exit); + +MODULE_AUTHOR("Tien Hock Loh <thloh@altera.com>"); +MODULE_DESCRIPTION("Altera GPIO driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-amd8111.c b/drivers/gpio/gpio-amd8111.c new file mode 100644 index 000000000..fdcebe595 --- /dev/null +++ b/drivers/gpio/gpio-amd8111.c @@ -0,0 +1,249 @@ +/* + * GPIO driver for AMD 8111 south bridges + * + * Copyright (c) 2012 Dmitry Eremin-Solenikov + * + * Based on the AMD RNG driver: + * Copyright 2005 (c) MontaVista Software, Inc. + * with the majority of the code coming from: + * + * Hardware driver for the Intel/AMD/VIA Random Number Generators (RNG) + * (c) Copyright 2003 Red Hat Inc <jgarzik@redhat.com> + * + * derived from + * + * Hardware driver for the AMD 768 Random Number Generator (RNG) + * (c) Copyright 2001 Red Hat Inc + * + * derived from + * + * Hardware driver for Intel i810 Random Number Generator (RNG) + * Copyright 2000,2001 Jeff Garzik <jgarzik@pobox.com> + * Copyright 2000,2001 Philipp Rumpf <prumpf@mandrakesoft.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/gpio/driver.h> +#include <linux/pci.h> +#include <linux/spinlock.h> + +#define PMBASE_OFFSET 0xb0 +#define PMBASE_SIZE 0x30 + +#define AMD_REG_GPIO(i) (0x10 + (i)) + +#define AMD_GPIO_LTCH_STS 0x40 /* Latch status, w1 */ +#define AMD_GPIO_RTIN 0x20 /* Real Time in, ro */ +#define AMD_GPIO_DEBOUNCE 0x10 /* Debounce, rw */ +#define AMD_GPIO_MODE_MASK 0x0c /* Pin Mode Select, rw */ +#define AMD_GPIO_MODE_IN 0x00 +#define AMD_GPIO_MODE_OUT 0x04 +/* Enable alternative (e.g. clkout, IRQ, etc) function of the pin */ +#define AMD_GPIO_MODE_ALTFN 0x08 /* Or 0x09 */ +#define AMD_GPIO_X_MASK 0x03 /* In/Out specific, rw */ +#define AMD_GPIO_X_IN_ACTIVEHI 0x01 /* Active High */ +#define AMD_GPIO_X_IN_LATCH 0x02 /* Latched version is selected */ +#define AMD_GPIO_X_OUT_LOW 0x00 +#define AMD_GPIO_X_OUT_HI 0x01 +#define AMD_GPIO_X_OUT_CLK0 0x02 +#define AMD_GPIO_X_OUT_CLK1 0x03 + +/* + * Data for PCI driver interface + * + * This data only exists for exporting the supported + * PCI ids via MODULE_DEVICE_TABLE. We do not actually + * register a pci_driver, because someone else might one day + * want to register another driver on the same PCI id. + */ +static const struct pci_device_id pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS), 0 }, + { 0, }, /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, pci_tbl); + +struct amd_gpio { + struct gpio_chip chip; + u32 pmbase; + void __iomem *pm; + struct pci_dev *pdev; + spinlock_t lock; /* guards hw registers and orig table */ + u8 orig[32]; +}; + +static int amd_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct amd_gpio *agp = gpiochip_get_data(chip); + + agp->orig[offset] = ioread8(agp->pm + AMD_REG_GPIO(offset)) & + (AMD_GPIO_DEBOUNCE | AMD_GPIO_MODE_MASK | AMD_GPIO_X_MASK); + + dev_dbg(&agp->pdev->dev, "Requested gpio %d, data %x\n", offset, agp->orig[offset]); + + return 0; +} + +static void amd_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct amd_gpio *agp = gpiochip_get_data(chip); + + dev_dbg(&agp->pdev->dev, "Freed gpio %d, data %x\n", offset, agp->orig[offset]); + + iowrite8(agp->orig[offset], agp->pm + AMD_REG_GPIO(offset)); +} + +static void amd_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct amd_gpio *agp = gpiochip_get_data(chip); + u8 temp; + unsigned long flags; + + spin_lock_irqsave(&agp->lock, flags); + temp = ioread8(agp->pm + AMD_REG_GPIO(offset)); + temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_OUT | (value ? AMD_GPIO_X_OUT_HI : AMD_GPIO_X_OUT_LOW); + iowrite8(temp, agp->pm + AMD_REG_GPIO(offset)); + spin_unlock_irqrestore(&agp->lock, flags); + + dev_dbg(&agp->pdev->dev, "Setting gpio %d, value %d, reg=%02x\n", offset, !!value, temp); +} + +static int amd_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct amd_gpio *agp = gpiochip_get_data(chip); + u8 temp; + + temp = ioread8(agp->pm + AMD_REG_GPIO(offset)); + + dev_dbg(&agp->pdev->dev, "Getting gpio %d, reg=%02x\n", offset, temp); + + return (temp & AMD_GPIO_RTIN) ? 1 : 0; +} + +static int amd_gpio_dirout(struct gpio_chip *chip, unsigned offset, int value) +{ + struct amd_gpio *agp = gpiochip_get_data(chip); + u8 temp; + unsigned long flags; + + spin_lock_irqsave(&agp->lock, flags); + temp = ioread8(agp->pm + AMD_REG_GPIO(offset)); + temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_OUT | (value ? AMD_GPIO_X_OUT_HI : AMD_GPIO_X_OUT_LOW); + iowrite8(temp, agp->pm + AMD_REG_GPIO(offset)); + spin_unlock_irqrestore(&agp->lock, flags); + + dev_dbg(&agp->pdev->dev, "Dirout gpio %d, value %d, reg=%02x\n", offset, !!value, temp); + + return 0; +} + +static int amd_gpio_dirin(struct gpio_chip *chip, unsigned offset) +{ + struct amd_gpio *agp = gpiochip_get_data(chip); + u8 temp; + unsigned long flags; + + spin_lock_irqsave(&agp->lock, flags); + temp = ioread8(agp->pm + AMD_REG_GPIO(offset)); + temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_IN; + iowrite8(temp, agp->pm + AMD_REG_GPIO(offset)); + spin_unlock_irqrestore(&agp->lock, flags); + + dev_dbg(&agp->pdev->dev, "Dirin gpio %d, reg=%02x\n", offset, temp); + + return 0; +} + +static struct amd_gpio gp = { + .chip = { + .label = "AMD GPIO", + .owner = THIS_MODULE, + .base = -1, + .ngpio = 32, + .request = amd_gpio_request, + .free = amd_gpio_free, + .set = amd_gpio_set, + .get = amd_gpio_get, + .direction_output = amd_gpio_dirout, + .direction_input = amd_gpio_dirin, + }, +}; + +static int __init amd_gpio_init(void) +{ + int err = -ENODEV; + struct pci_dev *pdev = NULL; + const struct pci_device_id *ent; + + + /* We look for our device - AMD South Bridge + * I don't know about a system with two such bridges, + * so we can assume that there is max. one device. + * + * We can't use plain pci_driver mechanism, + * as the device is really a multiple function device, + * main driver that binds to the pci_device is an smbus + * driver and have to find & bind to the device this way. + */ + for_each_pci_dev(pdev) { + ent = pci_match_id(pci_tbl, pdev); + if (ent) + goto found; + } + /* Device not found. */ + goto out; + +found: + err = pci_read_config_dword(pdev, 0x58, &gp.pmbase); + if (err) + goto out; + err = -EIO; + gp.pmbase &= 0x0000FF00; + if (gp.pmbase == 0) + goto out; + if (!devm_request_region(&pdev->dev, gp.pmbase + PMBASE_OFFSET, + PMBASE_SIZE, "AMD GPIO")) { + dev_err(&pdev->dev, "AMD GPIO region 0x%x already in use!\n", + gp.pmbase + PMBASE_OFFSET); + err = -EBUSY; + goto out; + } + gp.pm = ioport_map(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE); + if (!gp.pm) { + dev_err(&pdev->dev, "Couldn't map io port into io memory\n"); + err = -ENOMEM; + goto out; + } + gp.pdev = pdev; + gp.chip.parent = &pdev->dev; + + spin_lock_init(&gp.lock); + + printk(KERN_INFO "AMD-8111 GPIO detected\n"); + err = gpiochip_add_data(&gp.chip, &gp); + if (err) { + printk(KERN_ERR "GPIO registering failed (%d)\n", + err); + ioport_unmap(gp.pm); + goto out; + } +out: + return err; +} + +static void __exit amd_gpio_exit(void) +{ + gpiochip_remove(&gp.chip); + ioport_unmap(gp.pm); +} + +module_init(amd_gpio_init); +module_exit(amd_gpio_exit); + +MODULE_AUTHOR("The Linux Kernel team"); +MODULE_DESCRIPTION("GPIO driver for AMD chipsets"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-amdpt.c b/drivers/gpio/gpio-amdpt.c new file mode 100644 index 000000000..9b78dc837 --- /dev/null +++ b/drivers/gpio/gpio-amdpt.c @@ -0,0 +1,166 @@ +/* + * AMD Promontory GPIO driver + * + * Copyright (C) 2015 ASMedia Technology Inc. + * Author: YD Tseng <yd_tseng@asmedia.com.tw> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/gpio/driver.h> +#include <linux/spinlock.h> +#include <linux/acpi.h> +#include <linux/platform_device.h> + +#define PT_TOTAL_GPIO 8 + +/* PCI-E MMIO register offsets */ +#define PT_DIRECTION_REG 0x00 +#define PT_INPUTDATA_REG 0x04 +#define PT_OUTPUTDATA_REG 0x08 +#define PT_CLOCKRATE_REG 0x0C +#define PT_SYNC_REG 0x28 + +struct pt_gpio_chip { + struct gpio_chip gc; + void __iomem *reg_base; +}; + +static int pt_gpio_request(struct gpio_chip *gc, unsigned offset) +{ + struct pt_gpio_chip *pt_gpio = gpiochip_get_data(gc); + unsigned long flags; + u32 using_pins; + + dev_dbg(gc->parent, "pt_gpio_request offset=%x\n", offset); + + spin_lock_irqsave(&gc->bgpio_lock, flags); + + using_pins = readl(pt_gpio->reg_base + PT_SYNC_REG); + if (using_pins & BIT(offset)) { + dev_warn(gc->parent, "PT GPIO pin %x reconfigured\n", + offset); + spin_unlock_irqrestore(&gc->bgpio_lock, flags); + return -EINVAL; + } + + writel(using_pins | BIT(offset), pt_gpio->reg_base + PT_SYNC_REG); + + spin_unlock_irqrestore(&gc->bgpio_lock, flags); + + return 0; +} + +static void pt_gpio_free(struct gpio_chip *gc, unsigned offset) +{ + struct pt_gpio_chip *pt_gpio = gpiochip_get_data(gc); + unsigned long flags; + u32 using_pins; + + spin_lock_irqsave(&gc->bgpio_lock, flags); + + using_pins = readl(pt_gpio->reg_base + PT_SYNC_REG); + using_pins &= ~BIT(offset); + writel(using_pins, pt_gpio->reg_base + PT_SYNC_REG); + + spin_unlock_irqrestore(&gc->bgpio_lock, flags); + + dev_dbg(gc->parent, "pt_gpio_free offset=%x\n", offset); +} + +static int pt_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct acpi_device *acpi_dev; + acpi_handle handle = ACPI_HANDLE(dev); + struct pt_gpio_chip *pt_gpio; + struct resource *res_mem; + int ret = 0; + + if (acpi_bus_get_device(handle, &acpi_dev)) { + dev_err(dev, "PT GPIO device node not found\n"); + return -ENODEV; + } + + pt_gpio = devm_kzalloc(dev, sizeof(struct pt_gpio_chip), GFP_KERNEL); + if (!pt_gpio) + return -ENOMEM; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) { + dev_err(&pdev->dev, "Failed to get MMIO resource for PT GPIO.\n"); + return -EINVAL; + } + pt_gpio->reg_base = devm_ioremap_resource(dev, res_mem); + if (IS_ERR(pt_gpio->reg_base)) { + dev_err(&pdev->dev, "Failed to map MMIO resource for PT GPIO.\n"); + return PTR_ERR(pt_gpio->reg_base); + } + + ret = bgpio_init(&pt_gpio->gc, dev, 4, + pt_gpio->reg_base + PT_INPUTDATA_REG, + pt_gpio->reg_base + PT_OUTPUTDATA_REG, NULL, + pt_gpio->reg_base + PT_DIRECTION_REG, NULL, + BGPIOF_READ_OUTPUT_REG_SET); + if (ret) { + dev_err(&pdev->dev, "bgpio_init failed\n"); + return ret; + } + + pt_gpio->gc.owner = THIS_MODULE; + pt_gpio->gc.request = pt_gpio_request; + pt_gpio->gc.free = pt_gpio_free; + pt_gpio->gc.ngpio = PT_TOTAL_GPIO; +#if defined(CONFIG_OF_GPIO) + pt_gpio->gc.of_node = pdev->dev.of_node; +#endif + ret = gpiochip_add_data(&pt_gpio->gc, pt_gpio); + if (ret) { + dev_err(&pdev->dev, "Failed to register GPIO lib\n"); + return ret; + } + + platform_set_drvdata(pdev, pt_gpio); + + /* initialize register setting */ + writel(0, pt_gpio->reg_base + PT_SYNC_REG); + writel(0, pt_gpio->reg_base + PT_CLOCKRATE_REG); + + dev_dbg(&pdev->dev, "PT GPIO driver loaded\n"); + return ret; +} + +static int pt_gpio_remove(struct platform_device *pdev) +{ + struct pt_gpio_chip *pt_gpio = platform_get_drvdata(pdev); + + gpiochip_remove(&pt_gpio->gc); + + return 0; +} + +static const struct acpi_device_id pt_gpio_acpi_match[] = { + { "AMDF030", 0 }, + { "AMDIF030", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, pt_gpio_acpi_match); + +static struct platform_driver pt_gpio_driver = { + .driver = { + .name = "pt-gpio", + .acpi_match_table = ACPI_PTR(pt_gpio_acpi_match), + }, + .probe = pt_gpio_probe, + .remove = pt_gpio_remove, +}; + +module_platform_driver(pt_gpio_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("YD Tseng <yd_tseng@asmedia.com.tw>"); +MODULE_DESCRIPTION("AMD Promontory GPIO Driver"); diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c new file mode 100644 index 000000000..c6cf27003 --- /dev/null +++ b/drivers/gpio/gpio-arizona.c @@ -0,0 +1,218 @@ +/* + * gpiolib support for Wolfson Arizona class devices + * + * Copyright 2012 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/gpio/driver.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/seq_file.h> + +#include <linux/mfd/arizona/core.h> +#include <linux/mfd/arizona/pdata.h> +#include <linux/mfd/arizona/registers.h> + +struct arizona_gpio { + struct arizona *arizona; + struct gpio_chip gpio_chip; +}; + +static int arizona_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct arizona_gpio *arizona_gpio = gpiochip_get_data(chip); + struct arizona *arizona = arizona_gpio->arizona; + bool persistent = gpiochip_line_is_persistent(chip, offset); + bool change; + int ret; + + ret = regmap_update_bits_check(arizona->regmap, + ARIZONA_GPIO1_CTRL + offset, + ARIZONA_GPN_DIR, ARIZONA_GPN_DIR, + &change); + if (ret < 0) + return ret; + + if (change && persistent) { + pm_runtime_mark_last_busy(chip->parent); + pm_runtime_put_autosuspend(chip->parent); + } + + return 0; +} + +static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct arizona_gpio *arizona_gpio = gpiochip_get_data(chip); + struct arizona *arizona = arizona_gpio->arizona; + unsigned int reg, val; + int ret; + + reg = ARIZONA_GPIO1_CTRL + offset; + ret = regmap_read(arizona->regmap, reg, &val); + if (ret < 0) + return ret; + + /* Resume to read actual registers for input pins */ + if (val & ARIZONA_GPN_DIR) { + ret = pm_runtime_get_sync(chip->parent); + if (ret < 0) { + dev_err(chip->parent, "Failed to resume: %d\n", ret); + pm_runtime_put_autosuspend(chip->parent); + return ret; + } + + /* Register is cached, drop it to ensure a physical read */ + ret = regcache_drop_region(arizona->regmap, reg, reg); + if (ret < 0) { + dev_err(chip->parent, "Failed to drop cache: %d\n", + ret); + pm_runtime_put_autosuspend(chip->parent); + return ret; + } + + ret = regmap_read(arizona->regmap, reg, &val); + if (ret < 0) { + pm_runtime_put_autosuspend(chip->parent); + return ret; + } + + pm_runtime_mark_last_busy(chip->parent); + pm_runtime_put_autosuspend(chip->parent); + } + + if (val & ARIZONA_GPN_LVL) + return 1; + else + return 0; +} + +static int arizona_gpio_direction_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct arizona_gpio *arizona_gpio = gpiochip_get_data(chip); + struct arizona *arizona = arizona_gpio->arizona; + bool persistent = gpiochip_line_is_persistent(chip, offset); + unsigned int val; + int ret; + + ret = regmap_read(arizona->regmap, ARIZONA_GPIO1_CTRL + offset, &val); + if (ret < 0) + return ret; + + if ((val & ARIZONA_GPN_DIR) && persistent) { + ret = pm_runtime_get_sync(chip->parent); + if (ret < 0) { + dev_err(chip->parent, "Failed to resume: %d\n", ret); + pm_runtime_put(chip->parent); + return ret; + } + } + + if (value) + value = ARIZONA_GPN_LVL; + + return regmap_update_bits(arizona->regmap, ARIZONA_GPIO1_CTRL + offset, + ARIZONA_GPN_DIR | ARIZONA_GPN_LVL, value); +} + +static void arizona_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct arizona_gpio *arizona_gpio = gpiochip_get_data(chip); + struct arizona *arizona = arizona_gpio->arizona; + + if (value) + value = ARIZONA_GPN_LVL; + + regmap_update_bits(arizona->regmap, ARIZONA_GPIO1_CTRL + offset, + ARIZONA_GPN_LVL, value); +} + +static const struct gpio_chip template_chip = { + .label = "arizona", + .owner = THIS_MODULE, + .direction_input = arizona_gpio_direction_in, + .get = arizona_gpio_get, + .direction_output = arizona_gpio_direction_out, + .set = arizona_gpio_set, + .can_sleep = true, +}; + +static int arizona_gpio_probe(struct platform_device *pdev) +{ + struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); + struct arizona_pdata *pdata = dev_get_platdata(arizona->dev); + struct arizona_gpio *arizona_gpio; + int ret; + + arizona_gpio = devm_kzalloc(&pdev->dev, sizeof(*arizona_gpio), + GFP_KERNEL); + if (!arizona_gpio) + return -ENOMEM; + + arizona_gpio->arizona = arizona; + arizona_gpio->gpio_chip = template_chip; + arizona_gpio->gpio_chip.parent = &pdev->dev; +#ifdef CONFIG_OF_GPIO + arizona_gpio->gpio_chip.of_node = arizona->dev->of_node; +#endif + + switch (arizona->type) { + case WM5102: + case WM5110: + case WM8280: + case WM8997: + case WM8998: + case WM1814: + arizona_gpio->gpio_chip.ngpio = 5; + break; + case WM1831: + case CS47L24: + arizona_gpio->gpio_chip.ngpio = 2; + break; + default: + dev_err(&pdev->dev, "Unknown chip variant %d\n", + arizona->type); + return -EINVAL; + } + + if (pdata && pdata->gpio_base) + arizona_gpio->gpio_chip.base = pdata->gpio_base; + else + arizona_gpio->gpio_chip.base = -1; + + pm_runtime_enable(&pdev->dev); + + ret = devm_gpiochip_add_data(&pdev->dev, &arizona_gpio->gpio_chip, + arizona_gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", + ret); + return ret; + } + + return 0; +} + +static struct platform_driver arizona_gpio_driver = { + .driver.name = "arizona-gpio", + .probe = arizona_gpio_probe, +}; + +module_platform_driver(arizona_gpio_driver); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("GPIO interface for Arizona devices"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:arizona-gpio"); diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c new file mode 100644 index 000000000..e627e0e90 --- /dev/null +++ b/drivers/gpio/gpio-aspeed.c @@ -0,0 +1,1244 @@ +/* + * Copyright 2015 IBM Corp. + * + * Joel Stanley <joel@jms.id.au> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/div64.h> +#include <linux/clk.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/aspeed.h> +#include <linux/hashtable.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/string.h> + +/* + * These two headers aren't meant to be used by GPIO drivers. We need + * them in order to access gpio_chip_hwgpio() which we need to implement + * the aspeed specific API which allows the coprocessor to request + * access to some GPIOs and to arbitrate between coprocessor and ARM. + */ +#include <linux/gpio/consumer.h> +#include "gpiolib.h" + +struct aspeed_bank_props { + unsigned int bank; + u32 input; + u32 output; +}; + +struct aspeed_gpio_config { + unsigned int nr_gpios; + const struct aspeed_bank_props *props; +}; + +/* + * @offset_timer: Maps an offset to an @timer_users index, or zero if disabled + * @timer_users: Tracks the number of users for each timer + * + * The @timer_users has four elements but the first element is unused. This is + * to simplify accounting and indexing, as a zero value in @offset_timer + * represents disabled debouncing for the GPIO. Any other value for an element + * of @offset_timer is used as an index into @timer_users. This behaviour of + * the zero value aligns with the behaviour of zero built from the timer + * configuration registers (i.e. debouncing is disabled). + */ +struct aspeed_gpio { + struct gpio_chip chip; + spinlock_t lock; + void __iomem *base; + int irq; + const struct aspeed_gpio_config *config; + + u8 *offset_timer; + unsigned int timer_users[4]; + struct clk *clk; + + u32 *dcache; + u8 *cf_copro_bankmap; +}; + +struct aspeed_gpio_bank { + uint16_t val_regs; /* +0: Rd: read input value, Wr: set write latch + * +4: Rd/Wr: Direction (0=in, 1=out) + */ + uint16_t rdata_reg; /* Rd: read write latch, Wr: <none> */ + uint16_t irq_regs; + uint16_t debounce_regs; + uint16_t tolerance_regs; + uint16_t cmdsrc_regs; + const char names[4][3]; +}; + +/* + * Note: The "value" register returns the input value sampled on the + * line even when the GPIO is configured as an output. Since + * that input goes through synchronizers, writing, then reading + * back may not return the written value right away. + * + * The "rdata" register returns the content of the write latch + * and thus can be used to read back what was last written + * reliably. + */ + +static const int debounce_timers[4] = { 0x00, 0x50, 0x54, 0x58 }; + +static const struct aspeed_gpio_copro_ops *copro_ops; +static void *copro_data; + +static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { + { + .val_regs = 0x0000, + .rdata_reg = 0x00c0, + .irq_regs = 0x0008, + .debounce_regs = 0x0040, + .tolerance_regs = 0x001c, + .cmdsrc_regs = 0x0060, + .names = { "A", "B", "C", "D" }, + }, + { + .val_regs = 0x0020, + .rdata_reg = 0x00c4, + .irq_regs = 0x0028, + .debounce_regs = 0x0048, + .tolerance_regs = 0x003c, + .cmdsrc_regs = 0x0068, + .names = { "E", "F", "G", "H" }, + }, + { + .val_regs = 0x0070, + .rdata_reg = 0x00c8, + .irq_regs = 0x0098, + .debounce_regs = 0x00b0, + .tolerance_regs = 0x00ac, + .cmdsrc_regs = 0x0090, + .names = { "I", "J", "K", "L" }, + }, + { + .val_regs = 0x0078, + .rdata_reg = 0x00cc, + .irq_regs = 0x00e8, + .debounce_regs = 0x0100, + .tolerance_regs = 0x00fc, + .cmdsrc_regs = 0x00e0, + .names = { "M", "N", "O", "P" }, + }, + { + .val_regs = 0x0080, + .rdata_reg = 0x00d0, + .irq_regs = 0x0118, + .debounce_regs = 0x0130, + .tolerance_regs = 0x012c, + .cmdsrc_regs = 0x0110, + .names = { "Q", "R", "S", "T" }, + }, + { + .val_regs = 0x0088, + .rdata_reg = 0x00d4, + .irq_regs = 0x0148, + .debounce_regs = 0x0160, + .tolerance_regs = 0x015c, + .cmdsrc_regs = 0x0140, + .names = { "U", "V", "W", "X" }, + }, + { + .val_regs = 0x01E0, + .rdata_reg = 0x00d8, + .irq_regs = 0x0178, + .debounce_regs = 0x0190, + .tolerance_regs = 0x018c, + .cmdsrc_regs = 0x0170, + .names = { "Y", "Z", "AA", "AB" }, + }, + { + .val_regs = 0x01e8, + .rdata_reg = 0x00dc, + .irq_regs = 0x01a8, + .debounce_regs = 0x01c0, + .tolerance_regs = 0x01bc, + .cmdsrc_regs = 0x01a0, + .names = { "AC", "", "", "" }, + }, +}; + +enum aspeed_gpio_reg { + reg_val, + reg_rdata, + reg_dir, + reg_irq_enable, + reg_irq_type0, + reg_irq_type1, + reg_irq_type2, + reg_irq_status, + reg_debounce_sel1, + reg_debounce_sel2, + reg_tolerance, + reg_cmdsrc0, + reg_cmdsrc1, +}; + +#define GPIO_VAL_VALUE 0x00 +#define GPIO_VAL_DIR 0x04 + +#define GPIO_IRQ_ENABLE 0x00 +#define GPIO_IRQ_TYPE0 0x04 +#define GPIO_IRQ_TYPE1 0x08 +#define GPIO_IRQ_TYPE2 0x0c +#define GPIO_IRQ_STATUS 0x10 + +#define GPIO_DEBOUNCE_SEL1 0x00 +#define GPIO_DEBOUNCE_SEL2 0x04 + +#define GPIO_CMDSRC_0 0x00 +#define GPIO_CMDSRC_1 0x04 +#define GPIO_CMDSRC_ARM 0 +#define GPIO_CMDSRC_LPC 1 +#define GPIO_CMDSRC_COLDFIRE 2 +#define GPIO_CMDSRC_RESERVED 3 + +/* This will be resolved at compile time */ +static inline void __iomem *bank_reg(struct aspeed_gpio *gpio, + const struct aspeed_gpio_bank *bank, + const enum aspeed_gpio_reg reg) +{ + switch (reg) { + case reg_val: + return gpio->base + bank->val_regs + GPIO_VAL_VALUE; + case reg_rdata: + return gpio->base + bank->rdata_reg; + case reg_dir: + return gpio->base + bank->val_regs + GPIO_VAL_DIR; + case reg_irq_enable: + return gpio->base + bank->irq_regs + GPIO_IRQ_ENABLE; + case reg_irq_type0: + return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE0; + case reg_irq_type1: + return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE1; + case reg_irq_type2: + return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE2; + case reg_irq_status: + return gpio->base + bank->irq_regs + GPIO_IRQ_STATUS; + case reg_debounce_sel1: + return gpio->base + bank->debounce_regs + GPIO_DEBOUNCE_SEL1; + case reg_debounce_sel2: + return gpio->base + bank->debounce_regs + GPIO_DEBOUNCE_SEL2; + case reg_tolerance: + return gpio->base + bank->tolerance_regs; + case reg_cmdsrc0: + return gpio->base + bank->cmdsrc_regs + GPIO_CMDSRC_0; + case reg_cmdsrc1: + return gpio->base + bank->cmdsrc_regs + GPIO_CMDSRC_1; + } + BUG(); +} + +#define GPIO_BANK(x) ((x) >> 5) +#define GPIO_OFFSET(x) ((x) & 0x1f) +#define GPIO_BIT(x) BIT(GPIO_OFFSET(x)) + +#define _GPIO_SET_DEBOUNCE(t, o, i) ((!!((t) & BIT(i))) << GPIO_OFFSET(o)) +#define GPIO_SET_DEBOUNCE1(t, o) _GPIO_SET_DEBOUNCE(t, o, 1) +#define GPIO_SET_DEBOUNCE2(t, o) _GPIO_SET_DEBOUNCE(t, o, 0) + +static const struct aspeed_gpio_bank *to_bank(unsigned int offset) +{ + unsigned int bank = GPIO_BANK(offset); + + WARN_ON(bank >= ARRAY_SIZE(aspeed_gpio_banks)); + return &aspeed_gpio_banks[bank]; +} + +static inline bool is_bank_props_sentinel(const struct aspeed_bank_props *props) +{ + return !(props->input || props->output); +} + +static inline const struct aspeed_bank_props *find_bank_props( + struct aspeed_gpio *gpio, unsigned int offset) +{ + const struct aspeed_bank_props *props = gpio->config->props; + + while (!is_bank_props_sentinel(props)) { + if (props->bank == GPIO_BANK(offset)) + return props; + props++; + } + + return NULL; +} + +static inline bool have_gpio(struct aspeed_gpio *gpio, unsigned int offset) +{ + const struct aspeed_bank_props *props = find_bank_props(gpio, offset); + const struct aspeed_gpio_bank *bank = to_bank(offset); + unsigned int group = GPIO_OFFSET(offset) / 8; + + return bank->names[group][0] != '\0' && + (!props || ((props->input | props->output) & GPIO_BIT(offset))); +} + +static inline bool have_input(struct aspeed_gpio *gpio, unsigned int offset) +{ + const struct aspeed_bank_props *props = find_bank_props(gpio, offset); + + return !props || (props->input & GPIO_BIT(offset)); +} + +#define have_irq(g, o) have_input((g), (o)) +#define have_debounce(g, o) have_input((g), (o)) + +static inline bool have_output(struct aspeed_gpio *gpio, unsigned int offset) +{ + const struct aspeed_bank_props *props = find_bank_props(gpio, offset); + + return !props || (props->output & GPIO_BIT(offset)); +} + +static void aspeed_gpio_change_cmd_source(struct aspeed_gpio *gpio, + const struct aspeed_gpio_bank *bank, + int bindex, int cmdsrc) +{ + void __iomem *c0 = bank_reg(gpio, bank, reg_cmdsrc0); + void __iomem *c1 = bank_reg(gpio, bank, reg_cmdsrc1); + u32 bit, reg; + + /* + * Each register controls 4 banks, so take the bottom 2 + * bits of the bank index, and use them to select the + * right control bit (0, 8, 16 or 24). + */ + bit = BIT((bindex & 3) << 3); + + /* Source 1 first to avoid illegal 11 combination */ + reg = ioread32(c1); + if (cmdsrc & 2) + reg |= bit; + else + reg &= ~bit; + iowrite32(reg, c1); + + /* Then Source 0 */ + reg = ioread32(c0); + if (cmdsrc & 1) + reg |= bit; + else + reg &= ~bit; + iowrite32(reg, c0); +} + +static bool aspeed_gpio_copro_request(struct aspeed_gpio *gpio, + unsigned int offset) +{ + const struct aspeed_gpio_bank *bank = to_bank(offset); + + if (!copro_ops || !gpio->cf_copro_bankmap) + return false; + if (!gpio->cf_copro_bankmap[offset >> 3]) + return false; + if (!copro_ops->request_access) + return false; + + /* Pause the coprocessor */ + copro_ops->request_access(copro_data); + + /* Change command source back to ARM */ + aspeed_gpio_change_cmd_source(gpio, bank, offset >> 3, GPIO_CMDSRC_ARM); + + /* Update cache */ + gpio->dcache[GPIO_BANK(offset)] = ioread32(bank_reg(gpio, bank, reg_rdata)); + + return true; +} + +static void aspeed_gpio_copro_release(struct aspeed_gpio *gpio, + unsigned int offset) +{ + const struct aspeed_gpio_bank *bank = to_bank(offset); + + if (!copro_ops || !gpio->cf_copro_bankmap) + return; + if (!gpio->cf_copro_bankmap[offset >> 3]) + return; + if (!copro_ops->release_access) + return; + + /* Change command source back to ColdFire */ + aspeed_gpio_change_cmd_source(gpio, bank, offset >> 3, + GPIO_CMDSRC_COLDFIRE); + + /* Restart the coprocessor */ + copro_ops->release_access(copro_data); +} + +static int aspeed_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct aspeed_gpio *gpio = gpiochip_get_data(gc); + const struct aspeed_gpio_bank *bank = to_bank(offset); + + return !!(ioread32(bank_reg(gpio, bank, reg_val)) & GPIO_BIT(offset)); +} + +static void __aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset, + int val) +{ + struct aspeed_gpio *gpio = gpiochip_get_data(gc); + const struct aspeed_gpio_bank *bank = to_bank(offset); + void __iomem *addr; + u32 reg; + + addr = bank_reg(gpio, bank, reg_val); + reg = gpio->dcache[GPIO_BANK(offset)]; + + if (val) + reg |= GPIO_BIT(offset); + else + reg &= ~GPIO_BIT(offset); + gpio->dcache[GPIO_BANK(offset)] = reg; + + iowrite32(reg, addr); +} + +static void aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset, + int val) +{ + struct aspeed_gpio *gpio = gpiochip_get_data(gc); + unsigned long flags; + bool copro; + + spin_lock_irqsave(&gpio->lock, flags); + copro = aspeed_gpio_copro_request(gpio, offset); + + __aspeed_gpio_set(gc, offset, val); + + if (copro) + aspeed_gpio_copro_release(gpio, offset); + spin_unlock_irqrestore(&gpio->lock, flags); +} + +static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset) +{ + struct aspeed_gpio *gpio = gpiochip_get_data(gc); + const struct aspeed_gpio_bank *bank = to_bank(offset); + void __iomem *addr = bank_reg(gpio, bank, reg_dir); + unsigned long flags; + bool copro; + u32 reg; + + if (!have_input(gpio, offset)) + return -ENOTSUPP; + + spin_lock_irqsave(&gpio->lock, flags); + + reg = ioread32(addr); + reg &= ~GPIO_BIT(offset); + + copro = aspeed_gpio_copro_request(gpio, offset); + iowrite32(reg, addr); + if (copro) + aspeed_gpio_copro_release(gpio, offset); + + spin_unlock_irqrestore(&gpio->lock, flags); + + return 0; +} + +static int aspeed_gpio_dir_out(struct gpio_chip *gc, + unsigned int offset, int val) +{ + struct aspeed_gpio *gpio = gpiochip_get_data(gc); + const struct aspeed_gpio_bank *bank = to_bank(offset); + void __iomem *addr = bank_reg(gpio, bank, reg_dir); + unsigned long flags; + bool copro; + u32 reg; + + if (!have_output(gpio, offset)) + return -ENOTSUPP; + + spin_lock_irqsave(&gpio->lock, flags); + + reg = ioread32(addr); + reg |= GPIO_BIT(offset); + + copro = aspeed_gpio_copro_request(gpio, offset); + __aspeed_gpio_set(gc, offset, val); + iowrite32(reg, addr); + + if (copro) + aspeed_gpio_copro_release(gpio, offset); + spin_unlock_irqrestore(&gpio->lock, flags); + + return 0; +} + +static int aspeed_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + struct aspeed_gpio *gpio = gpiochip_get_data(gc); + const struct aspeed_gpio_bank *bank = to_bank(offset); + unsigned long flags; + u32 val; + + if (!have_input(gpio, offset)) + return 0; + + if (!have_output(gpio, offset)) + return 1; + + spin_lock_irqsave(&gpio->lock, flags); + + val = ioread32(bank_reg(gpio, bank, reg_dir)) & GPIO_BIT(offset); + + spin_unlock_irqrestore(&gpio->lock, flags); + + return !val; + +} + +static inline int irqd_to_aspeed_gpio_data(struct irq_data *d, + struct aspeed_gpio **gpio, + const struct aspeed_gpio_bank **bank, + u32 *bit, int *offset) +{ + struct aspeed_gpio *internal; + + *offset = irqd_to_hwirq(d); + + internal = irq_data_get_irq_chip_data(d); + + /* This might be a bit of a questionable place to check */ + if (!have_irq(internal, *offset)) + return -ENOTSUPP; + + *gpio = internal; + *bank = to_bank(*offset); + *bit = GPIO_BIT(*offset); + + return 0; +} + +static void aspeed_gpio_irq_ack(struct irq_data *d) +{ + const struct aspeed_gpio_bank *bank; + struct aspeed_gpio *gpio; + unsigned long flags; + void __iomem *status_addr; + int rc, offset; + bool copro; + u32 bit; + + rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit, &offset); + if (rc) + return; + + status_addr = bank_reg(gpio, bank, reg_irq_status); + + spin_lock_irqsave(&gpio->lock, flags); + copro = aspeed_gpio_copro_request(gpio, offset); + + iowrite32(bit, status_addr); + + if (copro) + aspeed_gpio_copro_release(gpio, offset); + spin_unlock_irqrestore(&gpio->lock, flags); +} + +static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set) +{ + const struct aspeed_gpio_bank *bank; + struct aspeed_gpio *gpio; + unsigned long flags; + u32 reg, bit; + void __iomem *addr; + int rc, offset; + bool copro; + + rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit, &offset); + if (rc) + return; + + addr = bank_reg(gpio, bank, reg_irq_enable); + + spin_lock_irqsave(&gpio->lock, flags); + copro = aspeed_gpio_copro_request(gpio, offset); + + reg = ioread32(addr); + if (set) + reg |= bit; + else + reg &= ~bit; + iowrite32(reg, addr); + + if (copro) + aspeed_gpio_copro_release(gpio, offset); + spin_unlock_irqrestore(&gpio->lock, flags); +} + +static void aspeed_gpio_irq_mask(struct irq_data *d) +{ + aspeed_gpio_irq_set_mask(d, false); +} + +static void aspeed_gpio_irq_unmask(struct irq_data *d) +{ + aspeed_gpio_irq_set_mask(d, true); +} + +static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type) +{ + u32 type0 = 0; + u32 type1 = 0; + u32 type2 = 0; + u32 bit, reg; + const struct aspeed_gpio_bank *bank; + irq_flow_handler_t handler; + struct aspeed_gpio *gpio; + unsigned long flags; + void __iomem *addr; + int rc, offset; + bool copro; + + rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit, &offset); + if (rc) + return -EINVAL; + + switch (type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_EDGE_BOTH: + type2 |= bit; + /* fall through */ + case IRQ_TYPE_EDGE_RISING: + type0 |= bit; + /* fall through */ + case IRQ_TYPE_EDGE_FALLING: + handler = handle_edge_irq; + break; + case IRQ_TYPE_LEVEL_HIGH: + type0 |= bit; + /* fall through */ + case IRQ_TYPE_LEVEL_LOW: + type1 |= bit; + handler = handle_level_irq; + break; + default: + return -EINVAL; + } + + spin_lock_irqsave(&gpio->lock, flags); + copro = aspeed_gpio_copro_request(gpio, offset); + + addr = bank_reg(gpio, bank, reg_irq_type0); + reg = ioread32(addr); + reg = (reg & ~bit) | type0; + iowrite32(reg, addr); + + addr = bank_reg(gpio, bank, reg_irq_type1); + reg = ioread32(addr); + reg = (reg & ~bit) | type1; + iowrite32(reg, addr); + + addr = bank_reg(gpio, bank, reg_irq_type2); + reg = ioread32(addr); + reg = (reg & ~bit) | type2; + iowrite32(reg, addr); + + if (copro) + aspeed_gpio_copro_release(gpio, offset); + spin_unlock_irqrestore(&gpio->lock, flags); + + irq_set_handler_locked(d, handler); + + return 0; +} + +static void aspeed_gpio_irq_handler(struct irq_desc *desc) +{ + struct gpio_chip *gc = irq_desc_get_handler_data(desc); + struct irq_chip *ic = irq_desc_get_chip(desc); + struct aspeed_gpio *data = gpiochip_get_data(gc); + unsigned int i, p, girq; + unsigned long reg; + + chained_irq_enter(ic, desc); + + for (i = 0; i < ARRAY_SIZE(aspeed_gpio_banks); i++) { + const struct aspeed_gpio_bank *bank = &aspeed_gpio_banks[i]; + + reg = ioread32(bank_reg(data, bank, reg_irq_status)); + + for_each_set_bit(p, ®, 32) { + girq = irq_find_mapping(gc->irq.domain, i * 32 + p); + generic_handle_irq(girq); + } + + } + + chained_irq_exit(ic, desc); +} + +static struct irq_chip aspeed_gpio_irqchip = { + .name = "aspeed-gpio", + .irq_ack = aspeed_gpio_irq_ack, + .irq_mask = aspeed_gpio_irq_mask, + .irq_unmask = aspeed_gpio_irq_unmask, + .irq_set_type = aspeed_gpio_set_type, +}; + +static void set_irq_valid_mask(struct aspeed_gpio *gpio) +{ + const struct aspeed_bank_props *props = gpio->config->props; + + while (!is_bank_props_sentinel(props)) { + unsigned int offset; + const unsigned long int input = props->input; + + /* Pretty crummy approach, but similar to GPIO core */ + for_each_clear_bit(offset, &input, 32) { + unsigned int i = props->bank * 32 + offset; + + if (i >= gpio->config->nr_gpios) + break; + + clear_bit(i, gpio->chip.irq.valid_mask); + } + + props++; + } +} + +static int aspeed_gpio_setup_irqs(struct aspeed_gpio *gpio, + struct platform_device *pdev) +{ + int rc; + + rc = platform_get_irq(pdev, 0); + if (rc < 0) + return rc; + + gpio->irq = rc; + + set_irq_valid_mask(gpio); + + rc = gpiochip_irqchip_add(&gpio->chip, &aspeed_gpio_irqchip, + 0, handle_bad_irq, IRQ_TYPE_NONE); + if (rc) { + dev_info(&pdev->dev, "Could not add irqchip\n"); + return rc; + } + + gpiochip_set_chained_irqchip(&gpio->chip, &aspeed_gpio_irqchip, + gpio->irq, aspeed_gpio_irq_handler); + + return 0; +} + +static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip, + unsigned int offset, bool enable) +{ + struct aspeed_gpio *gpio = gpiochip_get_data(chip); + unsigned long flags; + void __iomem *treg; + bool copro; + u32 val; + + treg = bank_reg(gpio, to_bank(offset), reg_tolerance); + + spin_lock_irqsave(&gpio->lock, flags); + copro = aspeed_gpio_copro_request(gpio, offset); + + val = readl(treg); + + if (enable) + val |= GPIO_BIT(offset); + else + val &= ~GPIO_BIT(offset); + + writel(val, treg); + + if (copro) + aspeed_gpio_copro_release(gpio, offset); + spin_unlock_irqrestore(&gpio->lock, flags); + + return 0; +} + +static int aspeed_gpio_request(struct gpio_chip *chip, unsigned int offset) +{ + if (!have_gpio(gpiochip_get_data(chip), offset)) + return -ENODEV; + + return pinctrl_gpio_request(chip->base + offset); +} + +static void aspeed_gpio_free(struct gpio_chip *chip, unsigned int offset) +{ + pinctrl_gpio_free(chip->base + offset); +} + +static int usecs_to_cycles(struct aspeed_gpio *gpio, unsigned long usecs, + u32 *cycles) +{ + u64 rate; + u64 n; + u32 r; + + rate = clk_get_rate(gpio->clk); + if (!rate) + return -ENOTSUPP; + + n = rate * usecs; + r = do_div(n, 1000000); + + if (n >= U32_MAX) + return -ERANGE; + + /* At least as long as the requested time */ + *cycles = n + (!!r); + + return 0; +} + +/* Call under gpio->lock */ +static int register_allocated_timer(struct aspeed_gpio *gpio, + unsigned int offset, unsigned int timer) +{ + if (WARN(gpio->offset_timer[offset] != 0, + "Offset %d already allocated timer %d\n", + offset, gpio->offset_timer[offset])) + return -EINVAL; + + if (WARN(gpio->timer_users[timer] == UINT_MAX, + "Timer user count would overflow\n")) + return -EPERM; + + gpio->offset_timer[offset] = timer; + gpio->timer_users[timer]++; + + return 0; +} + +/* Call under gpio->lock */ +static int unregister_allocated_timer(struct aspeed_gpio *gpio, + unsigned int offset) +{ + if (WARN(gpio->offset_timer[offset] == 0, + "No timer allocated to offset %d\n", offset)) + return -EINVAL; + + if (WARN(gpio->timer_users[gpio->offset_timer[offset]] == 0, + "No users recorded for timer %d\n", + gpio->offset_timer[offset])) + return -EINVAL; + + gpio->timer_users[gpio->offset_timer[offset]]--; + gpio->offset_timer[offset] = 0; + + return 0; +} + +/* Call under gpio->lock */ +static inline bool timer_allocation_registered(struct aspeed_gpio *gpio, + unsigned int offset) +{ + return gpio->offset_timer[offset] > 0; +} + +/* Call under gpio->lock */ +static void configure_timer(struct aspeed_gpio *gpio, unsigned int offset, + unsigned int timer) +{ + const struct aspeed_gpio_bank *bank = to_bank(offset); + const u32 mask = GPIO_BIT(offset); + void __iomem *addr; + u32 val; + + /* Note: Debounce timer isn't under control of the command + * source registers, so no need to sync with the coprocessor + */ + addr = bank_reg(gpio, bank, reg_debounce_sel1); + val = ioread32(addr); + iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE1(timer, offset), addr); + + addr = bank_reg(gpio, bank, reg_debounce_sel2); + val = ioread32(addr); + iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE2(timer, offset), addr); +} + +static int enable_debounce(struct gpio_chip *chip, unsigned int offset, + unsigned long usecs) +{ + struct aspeed_gpio *gpio = gpiochip_get_data(chip); + u32 requested_cycles; + unsigned long flags; + int rc; + int i; + + if (!gpio->clk) + return -EINVAL; + + rc = usecs_to_cycles(gpio, usecs, &requested_cycles); + if (rc < 0) { + dev_warn(chip->parent, "Failed to convert %luus to cycles at %luHz: %d\n", + usecs, clk_get_rate(gpio->clk), rc); + return rc; + } + + spin_lock_irqsave(&gpio->lock, flags); + + if (timer_allocation_registered(gpio, offset)) { + rc = unregister_allocated_timer(gpio, offset); + if (rc < 0) + goto out; + } + + /* Try to find a timer already configured for the debounce period */ + for (i = 1; i < ARRAY_SIZE(debounce_timers); i++) { + u32 cycles; + + cycles = ioread32(gpio->base + debounce_timers[i]); + if (requested_cycles == cycles) + break; + } + + if (i == ARRAY_SIZE(debounce_timers)) { + int j; + + /* + * As there are no timers configured for the requested debounce + * period, find an unused timer instead + */ + for (j = 1; j < ARRAY_SIZE(gpio->timer_users); j++) { + if (gpio->timer_users[j] == 0) + break; + } + + if (j == ARRAY_SIZE(gpio->timer_users)) { + dev_warn(chip->parent, + "Debounce timers exhausted, cannot debounce for period %luus\n", + usecs); + + rc = -EPERM; + + /* + * We already adjusted the accounting to remove @offset + * as a user of its previous timer, so also configure + * the hardware so @offset has timers disabled for + * consistency. + */ + configure_timer(gpio, offset, 0); + goto out; + } + + i = j; + + iowrite32(requested_cycles, gpio->base + debounce_timers[i]); + } + + if (WARN(i == 0, "Cannot register index of disabled timer\n")) { + rc = -EINVAL; + goto out; + } + + register_allocated_timer(gpio, offset, i); + configure_timer(gpio, offset, i); + +out: + spin_unlock_irqrestore(&gpio->lock, flags); + + return rc; +} + +static int disable_debounce(struct gpio_chip *chip, unsigned int offset) +{ + struct aspeed_gpio *gpio = gpiochip_get_data(chip); + unsigned long flags; + int rc; + + spin_lock_irqsave(&gpio->lock, flags); + + rc = unregister_allocated_timer(gpio, offset); + if (!rc) + configure_timer(gpio, offset, 0); + + spin_unlock_irqrestore(&gpio->lock, flags); + + return rc; +} + +static int set_debounce(struct gpio_chip *chip, unsigned int offset, + unsigned long usecs) +{ + struct aspeed_gpio *gpio = gpiochip_get_data(chip); + + if (!have_debounce(gpio, offset)) + return -ENOTSUPP; + + if (usecs) + return enable_debounce(chip, offset, usecs); + + return disable_debounce(chip, offset); +} + +static int aspeed_gpio_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + unsigned long param = pinconf_to_config_param(config); + u32 arg = pinconf_to_config_argument(config); + + if (param == PIN_CONFIG_INPUT_DEBOUNCE) + return set_debounce(chip, offset, arg); + else if (param == PIN_CONFIG_BIAS_DISABLE || + param == PIN_CONFIG_BIAS_PULL_DOWN || + param == PIN_CONFIG_DRIVE_STRENGTH) + return pinctrl_gpio_set_config(offset, config); + else if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN || + param == PIN_CONFIG_DRIVE_OPEN_SOURCE) + /* Return -ENOTSUPP to trigger emulation, as per datasheet */ + return -ENOTSUPP; + else if (param == PIN_CONFIG_PERSIST_STATE) + return aspeed_gpio_reset_tolerance(chip, offset, arg); + + return -ENOTSUPP; +} + +/** + * aspeed_gpio_copro_set_ops - Sets the callbacks used for handhsaking with + * the coprocessor for shared GPIO banks + * @ops: The callbacks + * @data: Pointer passed back to the callbacks + */ +int aspeed_gpio_copro_set_ops(const struct aspeed_gpio_copro_ops *ops, void *data) +{ + copro_data = data; + copro_ops = ops; + + return 0; +} +EXPORT_SYMBOL_GPL(aspeed_gpio_copro_set_ops); + +/** + * aspeed_gpio_copro_grab_gpio - Mark a GPIO used by the coprocessor. The entire + * bank gets marked and any access from the ARM will + * result in handshaking via callbacks. + * @desc: The GPIO to be marked + * @vreg_offset: If non-NULL, returns the value register offset in the GPIO space + * @dreg_offset: If non-NULL, returns the data latch register offset in the GPIO space + * @bit: If non-NULL, returns the bit number of the GPIO in the registers + */ +int aspeed_gpio_copro_grab_gpio(struct gpio_desc *desc, + u16 *vreg_offset, u16 *dreg_offset, u8 *bit) +{ + struct gpio_chip *chip = gpiod_to_chip(desc); + struct aspeed_gpio *gpio = gpiochip_get_data(chip); + int rc = 0, bindex, offset = gpio_chip_hwgpio(desc); + const struct aspeed_gpio_bank *bank = to_bank(offset); + unsigned long flags; + + if (!gpio->cf_copro_bankmap) + gpio->cf_copro_bankmap = kzalloc(gpio->config->nr_gpios >> 3, GFP_KERNEL); + if (!gpio->cf_copro_bankmap) + return -ENOMEM; + if (offset < 0 || offset > gpio->config->nr_gpios) + return -EINVAL; + bindex = offset >> 3; + + spin_lock_irqsave(&gpio->lock, flags); + + /* Sanity check, this shouldn't happen */ + if (gpio->cf_copro_bankmap[bindex] == 0xff) { + rc = -EIO; + goto bail; + } + gpio->cf_copro_bankmap[bindex]++; + + /* Switch command source */ + if (gpio->cf_copro_bankmap[bindex] == 1) + aspeed_gpio_change_cmd_source(gpio, bank, bindex, + GPIO_CMDSRC_COLDFIRE); + + if (vreg_offset) + *vreg_offset = bank->val_regs; + if (dreg_offset) + *dreg_offset = bank->rdata_reg; + if (bit) + *bit = GPIO_OFFSET(offset); + bail: + spin_unlock_irqrestore(&gpio->lock, flags); + return rc; +} +EXPORT_SYMBOL_GPL(aspeed_gpio_copro_grab_gpio); + +/** + * aspeed_gpio_copro_release_gpio - Unmark a GPIO used by the coprocessor. + * @desc: The GPIO to be marked + */ +int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc) +{ + struct gpio_chip *chip = gpiod_to_chip(desc); + struct aspeed_gpio *gpio = gpiochip_get_data(chip); + int rc = 0, bindex, offset = gpio_chip_hwgpio(desc); + const struct aspeed_gpio_bank *bank = to_bank(offset); + unsigned long flags; + + if (!gpio->cf_copro_bankmap) + return -ENXIO; + + if (offset < 0 || offset > gpio->config->nr_gpios) + return -EINVAL; + bindex = offset >> 3; + + spin_lock_irqsave(&gpio->lock, flags); + + /* Sanity check, this shouldn't happen */ + if (gpio->cf_copro_bankmap[bindex] == 0) { + rc = -EIO; + goto bail; + } + gpio->cf_copro_bankmap[bindex]--; + + /* Switch command source */ + if (gpio->cf_copro_bankmap[bindex] == 0) + aspeed_gpio_change_cmd_source(gpio, bank, bindex, + GPIO_CMDSRC_ARM); + bail: + spin_unlock_irqrestore(&gpio->lock, flags); + return rc; +} +EXPORT_SYMBOL_GPL(aspeed_gpio_copro_release_gpio); + +/* + * Any banks not specified in a struct aspeed_bank_props array are assumed to + * have the properties: + * + * { .input = 0xffffffff, .output = 0xffffffff } + */ + +static const struct aspeed_bank_props ast2400_bank_props[] = { + /* input output */ + { 5, 0xffffffff, 0x0000ffff }, /* U/V/W/X */ + { 6, 0x0000000f, 0x0fffff0f }, /* Y/Z/AA/AB, two 4-GPIO holes */ + { }, +}; + +static const struct aspeed_gpio_config ast2400_config = + /* 220 for simplicity, really 216 with two 4-GPIO holes, four at end */ + { .nr_gpios = 220, .props = ast2400_bank_props, }; + +static const struct aspeed_bank_props ast2500_bank_props[] = { + /* input output */ + { 5, 0xffffffff, 0x0000ffff }, /* U/V/W/X */ + { 6, 0x0fffffff, 0x0fffffff }, /* Y/Z/AA/AB, 4-GPIO hole */ + { 7, 0x000000ff, 0x000000ff }, /* AC */ + { }, +}; + +static const struct aspeed_gpio_config ast2500_config = + /* 232 for simplicity, actual number is 228 (4-GPIO hole in GPIOAB) */ + { .nr_gpios = 232, .props = ast2500_bank_props, }; + +static const struct of_device_id aspeed_gpio_of_table[] = { + { .compatible = "aspeed,ast2400-gpio", .data = &ast2400_config, }, + { .compatible = "aspeed,ast2500-gpio", .data = &ast2500_config, }, + {} +}; +MODULE_DEVICE_TABLE(of, aspeed_gpio_of_table); + +static int __init aspeed_gpio_probe(struct platform_device *pdev) +{ + const struct of_device_id *gpio_id; + struct aspeed_gpio *gpio; + struct resource *res; + int rc, i, banks; + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gpio->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(gpio->base)) + return PTR_ERR(gpio->base); + + spin_lock_init(&gpio->lock); + + gpio_id = of_match_node(aspeed_gpio_of_table, pdev->dev.of_node); + if (!gpio_id) + return -EINVAL; + + gpio->clk = of_clk_get(pdev->dev.of_node, 0); + if (IS_ERR(gpio->clk)) { + dev_warn(&pdev->dev, + "Failed to get clock from devicetree, debouncing disabled\n"); + gpio->clk = NULL; + } + + gpio->config = gpio_id->data; + + gpio->chip.parent = &pdev->dev; + gpio->chip.ngpio = gpio->config->nr_gpios; + gpio->chip.parent = &pdev->dev; + gpio->chip.direction_input = aspeed_gpio_dir_in; + gpio->chip.direction_output = aspeed_gpio_dir_out; + gpio->chip.get_direction = aspeed_gpio_get_direction; + gpio->chip.request = aspeed_gpio_request; + gpio->chip.free = aspeed_gpio_free; + gpio->chip.get = aspeed_gpio_get; + gpio->chip.set = aspeed_gpio_set; + gpio->chip.set_config = aspeed_gpio_set_config; + gpio->chip.label = dev_name(&pdev->dev); + gpio->chip.base = -1; + gpio->chip.irq.need_valid_mask = true; + + /* Allocate a cache of the output registers */ + banks = DIV_ROUND_UP(gpio->config->nr_gpios, 32); + gpio->dcache = devm_kcalloc(&pdev->dev, + banks, sizeof(u32), GFP_KERNEL); + if (!gpio->dcache) + return -ENOMEM; + + /* + * Populate it with initial values read from the HW and switch + * all command sources to the ARM by default + */ + for (i = 0; i < banks; i++) { + const struct aspeed_gpio_bank *bank = &aspeed_gpio_banks[i]; + void __iomem *addr = bank_reg(gpio, bank, reg_rdata); + gpio->dcache[i] = ioread32(addr); + aspeed_gpio_change_cmd_source(gpio, bank, 0, GPIO_CMDSRC_ARM); + aspeed_gpio_change_cmd_source(gpio, bank, 1, GPIO_CMDSRC_ARM); + aspeed_gpio_change_cmd_source(gpio, bank, 2, GPIO_CMDSRC_ARM); + aspeed_gpio_change_cmd_source(gpio, bank, 3, GPIO_CMDSRC_ARM); + } + + rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); + if (rc < 0) + return rc; + + gpio->offset_timer = + devm_kzalloc(&pdev->dev, gpio->chip.ngpio, GFP_KERNEL); + if (!gpio->offset_timer) + return -ENOMEM; + + return aspeed_gpio_setup_irqs(gpio, pdev); +} + +static struct platform_driver aspeed_gpio_driver = { + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = aspeed_gpio_of_table, + }, +}; + +module_platform_driver_probe(aspeed_gpio_driver, aspeed_gpio_probe); + +MODULE_DESCRIPTION("Aspeed GPIO Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-ath79.c b/drivers/gpio/gpio-ath79.c new file mode 100644 index 000000000..0a553d676 --- /dev/null +++ b/drivers/gpio/gpio-ath79.c @@ -0,0 +1,331 @@ +/* + * Atheros AR71XX/AR724X/AR913X GPIO API support + * + * Copyright (C) 2015 Alban Bedel <albeu@free.fr> + * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio/driver.h> +#include <linux/platform_data/gpio-ath79.h> +#include <linux/of_device.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/irq.h> + +#define AR71XX_GPIO_REG_OE 0x00 +#define AR71XX_GPIO_REG_IN 0x04 +#define AR71XX_GPIO_REG_SET 0x0c +#define AR71XX_GPIO_REG_CLEAR 0x10 + +#define AR71XX_GPIO_REG_INT_ENABLE 0x14 +#define AR71XX_GPIO_REG_INT_TYPE 0x18 +#define AR71XX_GPIO_REG_INT_POLARITY 0x1c +#define AR71XX_GPIO_REG_INT_PENDING 0x20 +#define AR71XX_GPIO_REG_INT_MASK 0x24 + +struct ath79_gpio_ctrl { + struct gpio_chip gc; + void __iomem *base; + raw_spinlock_t lock; + unsigned long both_edges; +}; + +static struct ath79_gpio_ctrl *irq_data_to_ath79_gpio(struct irq_data *data) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + + return container_of(gc, struct ath79_gpio_ctrl, gc); +} + +static u32 ath79_gpio_read(struct ath79_gpio_ctrl *ctrl, unsigned reg) +{ + return readl(ctrl->base + reg); +} + +static void ath79_gpio_write(struct ath79_gpio_ctrl *ctrl, + unsigned reg, u32 val) +{ + writel(val, ctrl->base + reg); +} + +static bool ath79_gpio_update_bits( + struct ath79_gpio_ctrl *ctrl, unsigned reg, u32 mask, u32 bits) +{ + u32 old_val, new_val; + + old_val = ath79_gpio_read(ctrl, reg); + new_val = (old_val & ~mask) | (bits & mask); + + if (new_val != old_val) + ath79_gpio_write(ctrl, reg, new_val); + + return new_val != old_val; +} + +static void ath79_gpio_irq_unmask(struct irq_data *data) +{ + struct ath79_gpio_ctrl *ctrl = irq_data_to_ath79_gpio(data); + u32 mask = BIT(irqd_to_hwirq(data)); + unsigned long flags; + + raw_spin_lock_irqsave(&ctrl->lock, flags); + ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_MASK, mask, mask); + raw_spin_unlock_irqrestore(&ctrl->lock, flags); +} + +static void ath79_gpio_irq_mask(struct irq_data *data) +{ + struct ath79_gpio_ctrl *ctrl = irq_data_to_ath79_gpio(data); + u32 mask = BIT(irqd_to_hwirq(data)); + unsigned long flags; + + raw_spin_lock_irqsave(&ctrl->lock, flags); + ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_MASK, mask, 0); + raw_spin_unlock_irqrestore(&ctrl->lock, flags); +} + +static void ath79_gpio_irq_enable(struct irq_data *data) +{ + struct ath79_gpio_ctrl *ctrl = irq_data_to_ath79_gpio(data); + u32 mask = BIT(irqd_to_hwirq(data)); + unsigned long flags; + + raw_spin_lock_irqsave(&ctrl->lock, flags); + ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_ENABLE, mask, mask); + ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_MASK, mask, mask); + raw_spin_unlock_irqrestore(&ctrl->lock, flags); +} + +static void ath79_gpio_irq_disable(struct irq_data *data) +{ + struct ath79_gpio_ctrl *ctrl = irq_data_to_ath79_gpio(data); + u32 mask = BIT(irqd_to_hwirq(data)); + unsigned long flags; + + raw_spin_lock_irqsave(&ctrl->lock, flags); + ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_MASK, mask, 0); + ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_ENABLE, mask, 0); + raw_spin_unlock_irqrestore(&ctrl->lock, flags); +} + +static int ath79_gpio_irq_set_type(struct irq_data *data, + unsigned int flow_type) +{ + struct ath79_gpio_ctrl *ctrl = irq_data_to_ath79_gpio(data); + u32 mask = BIT(irqd_to_hwirq(data)); + u32 type = 0, polarity = 0; + unsigned long flags; + bool disabled; + + switch (flow_type) { + case IRQ_TYPE_EDGE_RISING: + polarity |= mask; + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_BOTH: + break; + + case IRQ_TYPE_LEVEL_HIGH: + polarity |= mask; + /* fall through */ + case IRQ_TYPE_LEVEL_LOW: + type |= mask; + break; + + default: + return -EINVAL; + } + + raw_spin_lock_irqsave(&ctrl->lock, flags); + + if (flow_type == IRQ_TYPE_EDGE_BOTH) { + ctrl->both_edges |= mask; + polarity = ~ath79_gpio_read(ctrl, AR71XX_GPIO_REG_IN); + } else { + ctrl->both_edges &= ~mask; + } + + /* As the IRQ configuration can't be loaded atomically we + * have to disable the interrupt while the configuration state + * is invalid. + */ + disabled = ath79_gpio_update_bits( + ctrl, AR71XX_GPIO_REG_INT_ENABLE, mask, 0); + + ath79_gpio_update_bits( + ctrl, AR71XX_GPIO_REG_INT_TYPE, mask, type); + ath79_gpio_update_bits( + ctrl, AR71XX_GPIO_REG_INT_POLARITY, mask, polarity); + + if (disabled) + ath79_gpio_update_bits( + ctrl, AR71XX_GPIO_REG_INT_ENABLE, mask, mask); + + raw_spin_unlock_irqrestore(&ctrl->lock, flags); + + return 0; +} + +static struct irq_chip ath79_gpio_irqchip = { + .name = "gpio-ath79", + .irq_enable = ath79_gpio_irq_enable, + .irq_disable = ath79_gpio_irq_disable, + .irq_mask = ath79_gpio_irq_mask, + .irq_unmask = ath79_gpio_irq_unmask, + .irq_set_type = ath79_gpio_irq_set_type, +}; + +static void ath79_gpio_irq_handler(struct irq_desc *desc) +{ + struct gpio_chip *gc = irq_desc_get_handler_data(desc); + struct irq_chip *irqchip = irq_desc_get_chip(desc); + struct ath79_gpio_ctrl *ctrl = + container_of(gc, struct ath79_gpio_ctrl, gc); + unsigned long flags, pending; + u32 both_edges, state; + int irq; + + chained_irq_enter(irqchip, desc); + + raw_spin_lock_irqsave(&ctrl->lock, flags); + + pending = ath79_gpio_read(ctrl, AR71XX_GPIO_REG_INT_PENDING); + + /* Update the polarity of the both edges irqs */ + both_edges = ctrl->both_edges & pending; + if (both_edges) { + state = ath79_gpio_read(ctrl, AR71XX_GPIO_REG_IN); + ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_POLARITY, + both_edges, ~state); + } + + raw_spin_unlock_irqrestore(&ctrl->lock, flags); + + if (pending) { + for_each_set_bit(irq, &pending, gc->ngpio) + generic_handle_irq( + irq_linear_revmap(gc->irq.domain, irq)); + } + + chained_irq_exit(irqchip, desc); +} + +static const struct of_device_id ath79_gpio_of_match[] = { + { .compatible = "qca,ar7100-gpio" }, + { .compatible = "qca,ar9340-gpio" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ath79_gpio_of_match); + +static int ath79_gpio_probe(struct platform_device *pdev) +{ + struct ath79_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node *np = pdev->dev.of_node; + struct ath79_gpio_ctrl *ctrl; + struct resource *res; + u32 ath79_gpio_count; + bool oe_inverted; + int err; + + ctrl = devm_kzalloc(&pdev->dev, sizeof(*ctrl), GFP_KERNEL); + if (!ctrl) + return -ENOMEM; + platform_set_drvdata(pdev, ctrl); + + if (np) { + err = of_property_read_u32(np, "ngpios", &ath79_gpio_count); + if (err) { + dev_err(&pdev->dev, "ngpios property is not valid\n"); + return err; + } + oe_inverted = of_device_is_compatible(np, "qca,ar9340-gpio"); + } else if (pdata) { + ath79_gpio_count = pdata->ngpios; + oe_inverted = pdata->oe_inverted; + } else { + dev_err(&pdev->dev, "No DT node or platform data found\n"); + return -EINVAL; + } + + if (ath79_gpio_count >= 32) { + dev_err(&pdev->dev, "ngpios must be less than 32\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + ctrl->base = devm_ioremap_nocache( + &pdev->dev, res->start, resource_size(res)); + if (!ctrl->base) + return -ENOMEM; + + raw_spin_lock_init(&ctrl->lock); + err = bgpio_init(&ctrl->gc, &pdev->dev, 4, + ctrl->base + AR71XX_GPIO_REG_IN, + ctrl->base + AR71XX_GPIO_REG_SET, + ctrl->base + AR71XX_GPIO_REG_CLEAR, + oe_inverted ? NULL : ctrl->base + AR71XX_GPIO_REG_OE, + oe_inverted ? ctrl->base + AR71XX_GPIO_REG_OE : NULL, + 0); + if (err) { + dev_err(&pdev->dev, "bgpio_init failed\n"); + return err; + } + /* Use base 0 to stay compatible with legacy platforms */ + ctrl->gc.base = 0; + + err = gpiochip_add_data(&ctrl->gc, ctrl); + if (err) { + dev_err(&pdev->dev, + "cannot add AR71xx GPIO chip, error=%d", err); + return err; + } + + if (np && !of_property_read_bool(np, "interrupt-controller")) + return 0; + + err = gpiochip_irqchip_add(&ctrl->gc, &ath79_gpio_irqchip, 0, + handle_simple_irq, IRQ_TYPE_NONE); + if (err) { + dev_err(&pdev->dev, "failed to add gpiochip_irqchip\n"); + goto gpiochip_remove; + } + + gpiochip_set_chained_irqchip(&ctrl->gc, &ath79_gpio_irqchip, + platform_get_irq(pdev, 0), + ath79_gpio_irq_handler); + + return 0; + +gpiochip_remove: + gpiochip_remove(&ctrl->gc); + return err; +} + +static int ath79_gpio_remove(struct platform_device *pdev) +{ + struct ath79_gpio_ctrl *ctrl = platform_get_drvdata(pdev); + + gpiochip_remove(&ctrl->gc); + return 0; +} + +static struct platform_driver ath79_gpio_driver = { + .driver = { + .name = "ath79-gpio", + .of_match_table = ath79_gpio_of_match, + }, + .probe = ath79_gpio_probe, + .remove = ath79_gpio_remove, +}; + +module_platform_driver(ath79_gpio_driver); + +MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c new file mode 100644 index 000000000..d0707fc23 --- /dev/null +++ b/drivers/gpio/gpio-bcm-kona.c @@ -0,0 +1,679 @@ +/* + * Broadcom Kona GPIO Driver + * + * Author: Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com> + * Copyright (C) 2012-2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/gpio/driver.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/init.h> +#include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> + +#define BCM_GPIO_PASSWD 0x00a5a501 +#define GPIO_PER_BANK 32 +#define GPIO_MAX_BANK_NUM 8 + +#define GPIO_BANK(gpio) ((gpio) >> 5) +#define GPIO_BIT(gpio) ((gpio) & (GPIO_PER_BANK - 1)) + +/* There is a GPIO control register for each GPIO */ +#define GPIO_CONTROL(gpio) (0x00000100 + ((gpio) << 2)) + +/* The remaining registers are per GPIO bank */ +#define GPIO_OUT_STATUS(bank) (0x00000000 + ((bank) << 2)) +#define GPIO_IN_STATUS(bank) (0x00000020 + ((bank) << 2)) +#define GPIO_OUT_SET(bank) (0x00000040 + ((bank) << 2)) +#define GPIO_OUT_CLEAR(bank) (0x00000060 + ((bank) << 2)) +#define GPIO_INT_STATUS(bank) (0x00000080 + ((bank) << 2)) +#define GPIO_INT_MASK(bank) (0x000000a0 + ((bank) << 2)) +#define GPIO_INT_MSKCLR(bank) (0x000000c0 + ((bank) << 2)) +#define GPIO_PWD_STATUS(bank) (0x00000500 + ((bank) << 2)) + +#define GPIO_GPPWR_OFFSET 0x00000520 + +#define GPIO_GPCTR0_DBR_SHIFT 5 +#define GPIO_GPCTR0_DBR_MASK 0x000001e0 + +#define GPIO_GPCTR0_ITR_SHIFT 3 +#define GPIO_GPCTR0_ITR_MASK 0x00000018 +#define GPIO_GPCTR0_ITR_CMD_RISING_EDGE 0x00000001 +#define GPIO_GPCTR0_ITR_CMD_FALLING_EDGE 0x00000002 +#define GPIO_GPCTR0_ITR_CMD_BOTH_EDGE 0x00000003 + +#define GPIO_GPCTR0_IOTR_MASK 0x00000001 +#define GPIO_GPCTR0_IOTR_CMD_0UTPUT 0x00000000 +#define GPIO_GPCTR0_IOTR_CMD_INPUT 0x00000001 + +#define GPIO_GPCTR0_DB_ENABLE_MASK 0x00000100 + +#define LOCK_CODE 0xffffffff +#define UNLOCK_CODE 0x00000000 + +struct bcm_kona_gpio { + void __iomem *reg_base; + int num_bank; + raw_spinlock_t lock; + struct gpio_chip gpio_chip; + struct irq_domain *irq_domain; + struct bcm_kona_gpio_bank *banks; + struct platform_device *pdev; +}; + +struct bcm_kona_gpio_bank { + int id; + int irq; + /* Used in the interrupt handler */ + struct bcm_kona_gpio *kona_gpio; +}; + +static inline void bcm_kona_gpio_write_lock_regs(void __iomem *reg_base, + int bank_id, u32 lockcode) +{ + writel(BCM_GPIO_PASSWD, reg_base + GPIO_GPPWR_OFFSET); + writel(lockcode, reg_base + GPIO_PWD_STATUS(bank_id)); +} + +static void bcm_kona_gpio_lock_gpio(struct bcm_kona_gpio *kona_gpio, + unsigned gpio) +{ + u32 val; + unsigned long flags; + int bank_id = GPIO_BANK(gpio); + + raw_spin_lock_irqsave(&kona_gpio->lock, flags); + + val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id)); + val |= BIT(gpio); + bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val); + + raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); +} + +static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio, + unsigned gpio) +{ + u32 val; + unsigned long flags; + int bank_id = GPIO_BANK(gpio); + + raw_spin_lock_irqsave(&kona_gpio->lock, flags); + + val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id)); + val &= ~BIT(gpio); + bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val); + + raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); +} + +static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio) +{ + struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip); + void __iomem *reg_base = kona_gpio->reg_base; + u32 val; + + val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK; + return !!val; +} + +static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + int bank_id = GPIO_BANK(gpio); + int bit = GPIO_BIT(gpio); + u32 val, reg_offset; + unsigned long flags; + + kona_gpio = gpiochip_get_data(chip); + reg_base = kona_gpio->reg_base; + raw_spin_lock_irqsave(&kona_gpio->lock, flags); + + /* this function only applies to output pin */ + if (bcm_kona_gpio_get_dir(chip, gpio) == 1) + goto out; + + reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id); + + val = readl(reg_base + reg_offset); + val |= BIT(bit); + writel(val, reg_base + reg_offset); + +out: + raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); +} + +static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + int bank_id = GPIO_BANK(gpio); + int bit = GPIO_BIT(gpio); + u32 val, reg_offset; + unsigned long flags; + + kona_gpio = gpiochip_get_data(chip); + reg_base = kona_gpio->reg_base; + raw_spin_lock_irqsave(&kona_gpio->lock, flags); + + if (bcm_kona_gpio_get_dir(chip, gpio) == 1) + reg_offset = GPIO_IN_STATUS(bank_id); + else + reg_offset = GPIO_OUT_STATUS(bank_id); + + /* read the GPIO bank status */ + val = readl(reg_base + reg_offset); + + raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); + + /* return the specified bit status */ + return !!(val & BIT(bit)); +} + +static int bcm_kona_gpio_request(struct gpio_chip *chip, unsigned gpio) +{ + struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip); + + bcm_kona_gpio_unlock_gpio(kona_gpio, gpio); + return 0; +} + +static void bcm_kona_gpio_free(struct gpio_chip *chip, unsigned gpio) +{ + struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip); + + bcm_kona_gpio_lock_gpio(kona_gpio, gpio); +} + +static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + u32 val; + unsigned long flags; + + kona_gpio = gpiochip_get_data(chip); + reg_base = kona_gpio->reg_base; + raw_spin_lock_irqsave(&kona_gpio->lock, flags); + + val = readl(reg_base + GPIO_CONTROL(gpio)); + val &= ~GPIO_GPCTR0_IOTR_MASK; + val |= GPIO_GPCTR0_IOTR_CMD_INPUT; + writel(val, reg_base + GPIO_CONTROL(gpio)); + + raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); + + return 0; +} + +static int bcm_kona_gpio_direction_output(struct gpio_chip *chip, + unsigned gpio, int value) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + int bank_id = GPIO_BANK(gpio); + int bit = GPIO_BIT(gpio); + u32 val, reg_offset; + unsigned long flags; + + kona_gpio = gpiochip_get_data(chip); + reg_base = kona_gpio->reg_base; + raw_spin_lock_irqsave(&kona_gpio->lock, flags); + + val = readl(reg_base + GPIO_CONTROL(gpio)); + val &= ~GPIO_GPCTR0_IOTR_MASK; + val |= GPIO_GPCTR0_IOTR_CMD_0UTPUT; + writel(val, reg_base + GPIO_CONTROL(gpio)); + reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id); + + val = readl(reg_base + reg_offset); + val |= BIT(bit); + writel(val, reg_base + reg_offset); + + raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); + + return 0; +} + +static int bcm_kona_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) +{ + struct bcm_kona_gpio *kona_gpio; + + kona_gpio = gpiochip_get_data(chip); + if (gpio >= kona_gpio->gpio_chip.ngpio) + return -ENXIO; + return irq_create_mapping(kona_gpio->irq_domain, gpio); +} + +static int bcm_kona_gpio_set_debounce(struct gpio_chip *chip, unsigned gpio, + unsigned debounce) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + u32 val, res; + unsigned long flags; + + kona_gpio = gpiochip_get_data(chip); + reg_base = kona_gpio->reg_base; + /* debounce must be 1-128ms (or 0) */ + if ((debounce > 0 && debounce < 1000) || debounce > 128000) { + dev_err(chip->parent, "Debounce value %u not in range\n", + debounce); + return -EINVAL; + } + + /* calculate debounce bit value */ + if (debounce != 0) { + /* Convert to ms */ + debounce /= 1000; + /* find the MSB */ + res = fls(debounce) - 1; + /* Check if MSB-1 is set (round up or down) */ + if (res > 0 && (debounce & BIT(res - 1))) + res++; + } + + /* spin lock for read-modify-write of the GPIO register */ + raw_spin_lock_irqsave(&kona_gpio->lock, flags); + + val = readl(reg_base + GPIO_CONTROL(gpio)); + val &= ~GPIO_GPCTR0_DBR_MASK; + + if (debounce == 0) { + /* disable debounce */ + val &= ~GPIO_GPCTR0_DB_ENABLE_MASK; + } else { + val |= GPIO_GPCTR0_DB_ENABLE_MASK | + (res << GPIO_GPCTR0_DBR_SHIFT); + } + + writel(val, reg_base + GPIO_CONTROL(gpio)); + + raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); + + return 0; +} + +static int bcm_kona_gpio_set_config(struct gpio_chip *chip, unsigned gpio, + unsigned long config) +{ + u32 debounce; + + if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) + return -ENOTSUPP; + + debounce = pinconf_to_config_argument(config); + return bcm_kona_gpio_set_debounce(chip, gpio, debounce); +} + +static const struct gpio_chip template_chip = { + .label = "bcm-kona-gpio", + .owner = THIS_MODULE, + .request = bcm_kona_gpio_request, + .free = bcm_kona_gpio_free, + .get_direction = bcm_kona_gpio_get_dir, + .direction_input = bcm_kona_gpio_direction_input, + .get = bcm_kona_gpio_get, + .direction_output = bcm_kona_gpio_direction_output, + .set = bcm_kona_gpio_set, + .set_config = bcm_kona_gpio_set_config, + .to_irq = bcm_kona_gpio_to_irq, + .base = 0, +}; + +static void bcm_kona_gpio_irq_ack(struct irq_data *d) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + unsigned gpio = d->hwirq; + int bank_id = GPIO_BANK(gpio); + int bit = GPIO_BIT(gpio); + u32 val; + unsigned long flags; + + kona_gpio = irq_data_get_irq_chip_data(d); + reg_base = kona_gpio->reg_base; + raw_spin_lock_irqsave(&kona_gpio->lock, flags); + + val = readl(reg_base + GPIO_INT_STATUS(bank_id)); + val |= BIT(bit); + writel(val, reg_base + GPIO_INT_STATUS(bank_id)); + + raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); +} + +static void bcm_kona_gpio_irq_mask(struct irq_data *d) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + unsigned gpio = d->hwirq; + int bank_id = GPIO_BANK(gpio); + int bit = GPIO_BIT(gpio); + u32 val; + unsigned long flags; + + kona_gpio = irq_data_get_irq_chip_data(d); + reg_base = kona_gpio->reg_base; + raw_spin_lock_irqsave(&kona_gpio->lock, flags); + + val = readl(reg_base + GPIO_INT_MASK(bank_id)); + val |= BIT(bit); + writel(val, reg_base + GPIO_INT_MASK(bank_id)); + + raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); +} + +static void bcm_kona_gpio_irq_unmask(struct irq_data *d) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + unsigned gpio = d->hwirq; + int bank_id = GPIO_BANK(gpio); + int bit = GPIO_BIT(gpio); + u32 val; + unsigned long flags; + + kona_gpio = irq_data_get_irq_chip_data(d); + reg_base = kona_gpio->reg_base; + raw_spin_lock_irqsave(&kona_gpio->lock, flags); + + val = readl(reg_base + GPIO_INT_MSKCLR(bank_id)); + val |= BIT(bit); + writel(val, reg_base + GPIO_INT_MSKCLR(bank_id)); + + raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); +} + +static int bcm_kona_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + unsigned gpio = d->hwirq; + u32 lvl_type; + u32 val; + unsigned long flags; + + kona_gpio = irq_data_get_irq_chip_data(d); + reg_base = kona_gpio->reg_base; + switch (type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_EDGE_RISING: + lvl_type = GPIO_GPCTR0_ITR_CMD_RISING_EDGE; + break; + + case IRQ_TYPE_EDGE_FALLING: + lvl_type = GPIO_GPCTR0_ITR_CMD_FALLING_EDGE; + break; + + case IRQ_TYPE_EDGE_BOTH: + lvl_type = GPIO_GPCTR0_ITR_CMD_BOTH_EDGE; + break; + + case IRQ_TYPE_LEVEL_HIGH: + case IRQ_TYPE_LEVEL_LOW: + /* BCM GPIO doesn't support level triggering */ + default: + dev_err(kona_gpio->gpio_chip.parent, + "Invalid BCM GPIO irq type 0x%x\n", type); + return -EINVAL; + } + + raw_spin_lock_irqsave(&kona_gpio->lock, flags); + + val = readl(reg_base + GPIO_CONTROL(gpio)); + val &= ~GPIO_GPCTR0_ITR_MASK; + val |= lvl_type << GPIO_GPCTR0_ITR_SHIFT; + writel(val, reg_base + GPIO_CONTROL(gpio)); + + raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); + + return 0; +} + +static void bcm_kona_gpio_irq_handler(struct irq_desc *desc) +{ + void __iomem *reg_base; + int bit, bank_id; + unsigned long sta; + struct bcm_kona_gpio_bank *bank = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + + chained_irq_enter(chip, desc); + + /* + * For bank interrupts, we can't use chip_data to store the kona_gpio + * pointer, since GIC needs it for its own purposes. Therefore, we get + * our pointer from the bank structure. + */ + reg_base = bank->kona_gpio->reg_base; + bank_id = bank->id; + + while ((sta = readl(reg_base + GPIO_INT_STATUS(bank_id)) & + (~(readl(reg_base + GPIO_INT_MASK(bank_id)))))) { + for_each_set_bit(bit, &sta, 32) { + int hwirq = GPIO_PER_BANK * bank_id + bit; + int child_irq = + irq_find_mapping(bank->kona_gpio->irq_domain, + hwirq); + /* + * Clear interrupt before handler is called so we don't + * miss any interrupt occurred during executing them. + */ + writel(readl(reg_base + GPIO_INT_STATUS(bank_id)) | + BIT(bit), reg_base + GPIO_INT_STATUS(bank_id)); + /* Invoke interrupt handler */ + generic_handle_irq(child_irq); + } + } + + chained_irq_exit(chip, desc); +} + +static int bcm_kona_gpio_irq_reqres(struct irq_data *d) +{ + struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d); + int ret; + + ret = gpiochip_lock_as_irq(&kona_gpio->gpio_chip, d->hwirq); + if (ret) { + dev_err(kona_gpio->gpio_chip.parent, + "unable to lock HW IRQ %lu for IRQ\n", + d->hwirq); + return ret; + } + return 0; +} + +static void bcm_kona_gpio_irq_relres(struct irq_data *d) +{ + struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d); + + gpiochip_unlock_as_irq(&kona_gpio->gpio_chip, d->hwirq); +} + +static struct irq_chip bcm_gpio_irq_chip = { + .name = "bcm-kona-gpio", + .irq_ack = bcm_kona_gpio_irq_ack, + .irq_mask = bcm_kona_gpio_irq_mask, + .irq_unmask = bcm_kona_gpio_irq_unmask, + .irq_set_type = bcm_kona_gpio_irq_set_type, + .irq_request_resources = bcm_kona_gpio_irq_reqres, + .irq_release_resources = bcm_kona_gpio_irq_relres, +}; + +static struct of_device_id const bcm_kona_gpio_of_match[] = { + { .compatible = "brcm,kona-gpio" }, + {} +}; + +/* + * This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; +static struct lock_class_key gpio_request_class; + +static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + int ret; + + ret = irq_set_chip_data(irq, d->host_data); + if (ret < 0) + return ret; + irq_set_lockdep_class(irq, &gpio_lock_class, &gpio_request_class); + irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, handle_simple_irq); + irq_set_noprobe(irq); + + return 0; +} + +static void bcm_kona_gpio_irq_unmap(struct irq_domain *d, unsigned int irq) +{ + irq_set_chip_and_handler(irq, NULL, NULL); + irq_set_chip_data(irq, NULL); +} + +static const struct irq_domain_ops bcm_kona_irq_ops = { + .map = bcm_kona_gpio_irq_map, + .unmap = bcm_kona_gpio_irq_unmap, + .xlate = irq_domain_xlate_twocell, +}; + +static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio) +{ + void __iomem *reg_base; + int i; + + reg_base = kona_gpio->reg_base; + /* disable interrupts and clear status */ + for (i = 0; i < kona_gpio->num_bank; i++) { + /* Unlock the entire bank first */ + bcm_kona_gpio_write_lock_regs(reg_base, i, UNLOCK_CODE); + writel(0xffffffff, reg_base + GPIO_INT_MASK(i)); + writel(0xffffffff, reg_base + GPIO_INT_STATUS(i)); + /* Now re-lock the bank */ + bcm_kona_gpio_write_lock_regs(reg_base, i, LOCK_CODE); + } +} + +static int bcm_kona_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *match; + struct resource *res; + struct bcm_kona_gpio_bank *bank; + struct bcm_kona_gpio *kona_gpio; + struct gpio_chip *chip; + int ret; + int i; + + match = of_match_device(bcm_kona_gpio_of_match, dev); + if (!match) { + dev_err(dev, "Failed to find gpio controller\n"); + return -ENODEV; + } + + kona_gpio = devm_kzalloc(dev, sizeof(*kona_gpio), GFP_KERNEL); + if (!kona_gpio) + return -ENOMEM; + + kona_gpio->gpio_chip = template_chip; + chip = &kona_gpio->gpio_chip; + kona_gpio->num_bank = of_irq_count(dev->of_node); + if (kona_gpio->num_bank == 0) { + dev_err(dev, "Couldn't determine # GPIO banks\n"); + return -ENOENT; + } + if (kona_gpio->num_bank > GPIO_MAX_BANK_NUM) { + dev_err(dev, "Too many GPIO banks configured (max=%d)\n", + GPIO_MAX_BANK_NUM); + return -ENXIO; + } + kona_gpio->banks = devm_kcalloc(dev, + kona_gpio->num_bank, + sizeof(*kona_gpio->banks), + GFP_KERNEL); + if (!kona_gpio->banks) + return -ENOMEM; + + kona_gpio->pdev = pdev; + platform_set_drvdata(pdev, kona_gpio); + chip->of_node = dev->of_node; + chip->ngpio = kona_gpio->num_bank * GPIO_PER_BANK; + + kona_gpio->irq_domain = irq_domain_add_linear(dev->of_node, + chip->ngpio, + &bcm_kona_irq_ops, + kona_gpio); + if (!kona_gpio->irq_domain) { + dev_err(dev, "Couldn't allocate IRQ domain\n"); + return -ENXIO; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + kona_gpio->reg_base = devm_ioremap_resource(dev, res); + if (IS_ERR(kona_gpio->reg_base)) { + ret = -ENXIO; + goto err_irq_domain; + } + + for (i = 0; i < kona_gpio->num_bank; i++) { + bank = &kona_gpio->banks[i]; + bank->id = i; + bank->irq = platform_get_irq(pdev, i); + bank->kona_gpio = kona_gpio; + if (bank->irq < 0) { + dev_err(dev, "Couldn't get IRQ for bank %d", i); + ret = -ENOENT; + goto err_irq_domain; + } + } + + dev_info(&pdev->dev, "Setting up Kona GPIO\n"); + + bcm_kona_gpio_reset(kona_gpio); + + ret = devm_gpiochip_add_data(dev, chip, kona_gpio); + if (ret < 0) { + dev_err(dev, "Couldn't add GPIO chip -- %d\n", ret); + goto err_irq_domain; + } + for (i = 0; i < kona_gpio->num_bank; i++) { + bank = &kona_gpio->banks[i]; + irq_set_chained_handler_and_data(bank->irq, + bcm_kona_gpio_irq_handler, + bank); + } + + raw_spin_lock_init(&kona_gpio->lock); + + return 0; + +err_irq_domain: + irq_domain_remove(kona_gpio->irq_domain); + + return ret; +} + +static struct platform_driver bcm_kona_gpio_driver = { + .driver = { + .name = "bcm-kona-gpio", + .of_match_table = bcm_kona_gpio_of_match, + }, + .probe = bcm_kona_gpio_probe, +}; +builtin_platform_driver(bcm_kona_gpio_driver); diff --git a/drivers/gpio/gpio-bd9571mwv.c b/drivers/gpio/gpio-bd9571mwv.c new file mode 100644 index 000000000..5224a946e --- /dev/null +++ b/drivers/gpio/gpio-bd9571mwv.c @@ -0,0 +1,144 @@ +/* + * ROHM BD9571MWV-M GPIO driver + * + * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + * + * Based on the TPS65086 driver + * + * NOTE: Interrupts are not supported yet. + */ + +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <linux/mfd/bd9571mwv.h> + +struct bd9571mwv_gpio { + struct gpio_chip chip; + struct bd9571mwv *bd; +}; + +static int bd9571mwv_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip); + int ret, val; + + ret = regmap_read(gpio->bd->regmap, BD9571MWV_GPIO_DIR, &val); + if (ret < 0) + return ret; + + return val & BIT(offset); +} + +static int bd9571mwv_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip); + + regmap_update_bits(gpio->bd->regmap, BD9571MWV_GPIO_DIR, + BIT(offset), 0); + + return 0; +} + +static int bd9571mwv_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip); + + /* Set the initial value */ + regmap_update_bits(gpio->bd->regmap, BD9571MWV_GPIO_OUT, + BIT(offset), value ? BIT(offset) : 0); + regmap_update_bits(gpio->bd->regmap, BD9571MWV_GPIO_DIR, + BIT(offset), BIT(offset)); + + return 0; +} + +static int bd9571mwv_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip); + int ret, val; + + ret = regmap_read(gpio->bd->regmap, BD9571MWV_GPIO_IN, &val); + if (ret < 0) + return ret; + + return val & BIT(offset); +} + +static void bd9571mwv_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip); + + regmap_update_bits(gpio->bd->regmap, BD9571MWV_GPIO_OUT, + BIT(offset), value ? BIT(offset) : 0); +} + +static const struct gpio_chip template_chip = { + .label = "bd9571mwv-gpio", + .owner = THIS_MODULE, + .get_direction = bd9571mwv_gpio_get_direction, + .direction_input = bd9571mwv_gpio_direction_input, + .direction_output = bd9571mwv_gpio_direction_output, + .get = bd9571mwv_gpio_get, + .set = bd9571mwv_gpio_set, + .base = -1, + .ngpio = 2, + .can_sleep = true, +}; + +static int bd9571mwv_gpio_probe(struct platform_device *pdev) +{ + struct bd9571mwv_gpio *gpio; + int ret; + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + platform_set_drvdata(pdev, gpio); + + gpio->bd = dev_get_drvdata(pdev->dev.parent); + gpio->chip = template_chip; + gpio->chip.parent = gpio->bd->dev; + + ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + return 0; +} + +static const struct platform_device_id bd9571mwv_gpio_id_table[] = { + { "bd9571mwv-gpio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, bd9571mwv_gpio_id_table); + +static struct platform_driver bd9571mwv_gpio_driver = { + .driver = { + .name = "bd9571mwv-gpio", + }, + .probe = bd9571mwv_gpio_probe, + .id_table = bd9571mwv_gpio_id_table, +}; +module_platform_driver(bd9571mwv_gpio_driver); + +MODULE_AUTHOR("Marek Vasut <marek.vasut+renesas@gmail.com>"); +MODULE_DESCRIPTION("BD9571MWV GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c new file mode 100644 index 000000000..af936dcca --- /dev/null +++ b/drivers/gpio/gpio-brcmstb.c @@ -0,0 +1,786 @@ +/* + * Copyright (C) 2015-2017 Broadcom + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitops.h> +#include <linux/gpio/driver.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/module.h> +#include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/interrupt.h> + +enum gio_reg_index { + GIO_REG_ODEN = 0, + GIO_REG_DATA, + GIO_REG_IODIR, + GIO_REG_EC, + GIO_REG_EI, + GIO_REG_MASK, + GIO_REG_LEVEL, + GIO_REG_STAT, + NUMBER_OF_GIO_REGISTERS +}; + +#define GIO_BANK_SIZE (NUMBER_OF_GIO_REGISTERS * sizeof(u32)) +#define GIO_BANK_OFF(bank, off) (((bank) * GIO_BANK_SIZE) + (off * sizeof(u32))) +#define GIO_ODEN(bank) GIO_BANK_OFF(bank, GIO_REG_ODEN) +#define GIO_DATA(bank) GIO_BANK_OFF(bank, GIO_REG_DATA) +#define GIO_IODIR(bank) GIO_BANK_OFF(bank, GIO_REG_IODIR) +#define GIO_EC(bank) GIO_BANK_OFF(bank, GIO_REG_EC) +#define GIO_EI(bank) GIO_BANK_OFF(bank, GIO_REG_EI) +#define GIO_MASK(bank) GIO_BANK_OFF(bank, GIO_REG_MASK) +#define GIO_LEVEL(bank) GIO_BANK_OFF(bank, GIO_REG_LEVEL) +#define GIO_STAT(bank) GIO_BANK_OFF(bank, GIO_REG_STAT) + +struct brcmstb_gpio_bank { + struct list_head node; + int id; + struct gpio_chip gc; + struct brcmstb_gpio_priv *parent_priv; + u32 width; + u32 wake_active; + u32 saved_regs[GIO_REG_STAT]; /* Don't save and restore GIO_REG_STAT */ +}; + +struct brcmstb_gpio_priv { + struct list_head bank_list; + void __iomem *reg_base; + struct platform_device *pdev; + struct irq_domain *irq_domain; + struct irq_chip irq_chip; + int parent_irq; + int gpio_base; + int num_gpios; + int parent_wake_irq; +}; + +#define MAX_GPIO_PER_BANK 32 +#define GPIO_BANK(gpio) ((gpio) >> 5) +/* assumes MAX_GPIO_PER_BANK is a multiple of 2 */ +#define GPIO_BIT(gpio) ((gpio) & (MAX_GPIO_PER_BANK - 1)) + +static inline struct brcmstb_gpio_priv * +brcmstb_gpio_gc_to_priv(struct gpio_chip *gc) +{ + struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); + return bank->parent_priv; +} + +static unsigned long +__brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank) +{ + void __iomem *reg_base = bank->parent_priv->reg_base; + + return bank->gc.read_reg(reg_base + GIO_STAT(bank->id)) & + bank->gc.read_reg(reg_base + GIO_MASK(bank->id)); +} + +static unsigned long +brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank) +{ + unsigned long status; + unsigned long flags; + + spin_lock_irqsave(&bank->gc.bgpio_lock, flags); + status = __brcmstb_gpio_get_active_irqs(bank); + spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags); + + return status; +} + +static int brcmstb_gpio_hwirq_to_offset(irq_hw_number_t hwirq, + struct brcmstb_gpio_bank *bank) +{ + return hwirq - (bank->gc.base - bank->parent_priv->gpio_base); +} + +static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank, + unsigned int hwirq, bool enable) +{ + struct gpio_chip *gc = &bank->gc; + struct brcmstb_gpio_priv *priv = bank->parent_priv; + u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(hwirq, bank)); + u32 imask; + unsigned long flags; + + spin_lock_irqsave(&gc->bgpio_lock, flags); + imask = gc->read_reg(priv->reg_base + GIO_MASK(bank->id)); + if (enable) + imask |= mask; + else + imask &= ~mask; + gc->write_reg(priv->reg_base + GIO_MASK(bank->id), imask); + spin_unlock_irqrestore(&gc->bgpio_lock, flags); +} + +static int brcmstb_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc); + /* gc_offset is relative to this gpio_chip; want real offset */ + int hwirq = offset + (gc->base - priv->gpio_base); + + if (hwirq >= priv->num_gpios) + return -ENXIO; + return irq_create_mapping(priv->irq_domain, hwirq); +} + +/* -------------------- IRQ chip functions -------------------- */ + +static void brcmstb_gpio_irq_mask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); + + brcmstb_gpio_set_imask(bank, d->hwirq, false); +} + +static void brcmstb_gpio_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); + + brcmstb_gpio_set_imask(bank, d->hwirq, true); +} + +static void brcmstb_gpio_irq_ack(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); + struct brcmstb_gpio_priv *priv = bank->parent_priv; + u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank)); + + gc->write_reg(priv->reg_base + GIO_STAT(bank->id), mask); +} + +static int brcmstb_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); + struct brcmstb_gpio_priv *priv = bank->parent_priv; + u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank)); + u32 edge_insensitive, iedge_insensitive; + u32 edge_config, iedge_config; + u32 level, ilevel; + unsigned long flags; + + switch (type) { + case IRQ_TYPE_LEVEL_LOW: + level = mask; + edge_config = 0; + edge_insensitive = 0; + break; + case IRQ_TYPE_LEVEL_HIGH: + level = mask; + edge_config = mask; + edge_insensitive = 0; + break; + case IRQ_TYPE_EDGE_FALLING: + level = 0; + edge_config = 0; + edge_insensitive = 0; + break; + case IRQ_TYPE_EDGE_RISING: + level = 0; + edge_config = mask; + edge_insensitive = 0; + break; + case IRQ_TYPE_EDGE_BOTH: + level = 0; + edge_config = 0; /* don't care, but want known value */ + edge_insensitive = mask; + break; + default: + return -EINVAL; + } + + spin_lock_irqsave(&bank->gc.bgpio_lock, flags); + + iedge_config = bank->gc.read_reg(priv->reg_base + + GIO_EC(bank->id)) & ~mask; + iedge_insensitive = bank->gc.read_reg(priv->reg_base + + GIO_EI(bank->id)) & ~mask; + ilevel = bank->gc.read_reg(priv->reg_base + + GIO_LEVEL(bank->id)) & ~mask; + + bank->gc.write_reg(priv->reg_base + GIO_EC(bank->id), + iedge_config | edge_config); + bank->gc.write_reg(priv->reg_base + GIO_EI(bank->id), + iedge_insensitive | edge_insensitive); + bank->gc.write_reg(priv->reg_base + GIO_LEVEL(bank->id), + ilevel | level); + + spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags); + return 0; +} + +static int brcmstb_gpio_priv_set_wake(struct brcmstb_gpio_priv *priv, + unsigned int enable) +{ + int ret = 0; + + if (enable) + ret = enable_irq_wake(priv->parent_wake_irq); + else + ret = disable_irq_wake(priv->parent_wake_irq); + if (ret) + dev_err(&priv->pdev->dev, "failed to %s wake-up interrupt\n", + enable ? "enable" : "disable"); + return ret; +} + +static int brcmstb_gpio_irq_set_wake(struct irq_data *d, unsigned int enable) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); + struct brcmstb_gpio_priv *priv = bank->parent_priv; + u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank)); + + /* + * Do not do anything specific for now, suspend/resume callbacks will + * configure the interrupt mask appropriately + */ + if (enable) + bank->wake_active |= mask; + else + bank->wake_active &= ~mask; + + return brcmstb_gpio_priv_set_wake(priv, enable); +} + +static irqreturn_t brcmstb_gpio_wake_irq_handler(int irq, void *data) +{ + struct brcmstb_gpio_priv *priv = data; + + if (!priv || irq != priv->parent_wake_irq) + return IRQ_NONE; + + /* Nothing to do */ + return IRQ_HANDLED; +} + +static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank) +{ + struct brcmstb_gpio_priv *priv = bank->parent_priv; + struct irq_domain *domain = priv->irq_domain; + int hwbase = bank->gc.base - priv->gpio_base; + unsigned long status; + + while ((status = brcmstb_gpio_get_active_irqs(bank))) { + unsigned int irq, offset; + + for_each_set_bit(offset, &status, 32) { + if (offset >= bank->width) + dev_warn(&priv->pdev->dev, + "IRQ for invalid GPIO (bank=%d, offset=%d)\n", + bank->id, offset); + irq = irq_linear_revmap(domain, hwbase + offset); + generic_handle_irq(irq); + } + } +} + +/* Each UPG GIO block has one IRQ for all banks */ +static void brcmstb_gpio_irq_handler(struct irq_desc *desc) +{ + struct brcmstb_gpio_priv *priv = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + struct brcmstb_gpio_bank *bank; + + /* Interrupts weren't properly cleared during probe */ + BUG_ON(!priv || !chip); + + chained_irq_enter(chip, desc); + list_for_each_entry(bank, &priv->bank_list, node) + brcmstb_gpio_irq_bank_handler(bank); + chained_irq_exit(chip, desc); +} + +static struct brcmstb_gpio_bank *brcmstb_gpio_hwirq_to_bank( + struct brcmstb_gpio_priv *priv, irq_hw_number_t hwirq) +{ + struct brcmstb_gpio_bank *bank; + int i = 0; + + /* banks are in descending order */ + list_for_each_entry_reverse(bank, &priv->bank_list, node) { + i += bank->gc.ngpio; + if (hwirq < i) + return bank; + } + return NULL; +} + +/* + * This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key brcmstb_gpio_irq_lock_class; +static struct lock_class_key brcmstb_gpio_irq_request_class; + + +static int brcmstb_gpio_irq_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct brcmstb_gpio_priv *priv = d->host_data; + struct brcmstb_gpio_bank *bank = + brcmstb_gpio_hwirq_to_bank(priv, hwirq); + struct platform_device *pdev = priv->pdev; + int ret; + + if (!bank) + return -EINVAL; + + dev_dbg(&pdev->dev, "Mapping irq %d for gpio line %d (bank %d)\n", + irq, (int)hwirq, bank->id); + ret = irq_set_chip_data(irq, &bank->gc); + if (ret < 0) + return ret; + irq_set_lockdep_class(irq, &brcmstb_gpio_irq_lock_class, + &brcmstb_gpio_irq_request_class); + irq_set_chip_and_handler(irq, &priv->irq_chip, handle_level_irq); + irq_set_noprobe(irq); + return 0; +} + +static void brcmstb_gpio_irq_unmap(struct irq_domain *d, unsigned int irq) +{ + irq_set_chip_and_handler(irq, NULL, NULL); + irq_set_chip_data(irq, NULL); +} + +static const struct irq_domain_ops brcmstb_gpio_irq_domain_ops = { + .map = brcmstb_gpio_irq_map, + .unmap = brcmstb_gpio_irq_unmap, + .xlate = irq_domain_xlate_twocell, +}; + +/* Make sure that the number of banks matches up between properties */ +static int brcmstb_gpio_sanity_check_banks(struct device *dev, + struct device_node *np, struct resource *res) +{ + int res_num_banks = resource_size(res) / GIO_BANK_SIZE; + int num_banks = + of_property_count_u32_elems(np, "brcm,gpio-bank-widths"); + + if (res_num_banks != num_banks) { + dev_err(dev, "Mismatch in banks: res had %d, bank-widths had %d\n", + res_num_banks, num_banks); + return -EINVAL; + } else { + return 0; + } +} + +static int brcmstb_gpio_remove(struct platform_device *pdev) +{ + struct brcmstb_gpio_priv *priv = platform_get_drvdata(pdev); + struct brcmstb_gpio_bank *bank; + int offset, ret = 0, virq; + + if (!priv) { + dev_err(&pdev->dev, "called %s without drvdata!\n", __func__); + return -EFAULT; + } + + if (priv->parent_irq > 0) + irq_set_chained_handler_and_data(priv->parent_irq, NULL, NULL); + + /* Remove all IRQ mappings and delete the domain */ + if (priv->irq_domain) { + for (offset = 0; offset < priv->num_gpios; offset++) { + virq = irq_find_mapping(priv->irq_domain, offset); + irq_dispose_mapping(virq); + } + irq_domain_remove(priv->irq_domain); + } + + /* + * You can lose return values below, but we report all errors, and it's + * more important to actually perform all of the steps. + */ + list_for_each_entry(bank, &priv->bank_list, node) + gpiochip_remove(&bank->gc); + + return ret; +} + +static int brcmstb_gpio_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, u32 *flags) +{ + struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc); + struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); + int offset; + + if (gc->of_gpio_n_cells != 2) { + WARN_ON(1); + return -EINVAL; + } + + if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells)) + return -EINVAL; + + offset = gpiospec->args[0] - (gc->base - priv->gpio_base); + if (offset >= gc->ngpio || offset < 0) + return -EINVAL; + + if (unlikely(offset >= bank->width)) { + dev_warn_ratelimited(&priv->pdev->dev, + "Received request for invalid GPIO offset %d\n", + gpiospec->args[0]); + } + + if (flags) + *flags = gpiospec->args[1]; + + return offset; +} + +/* priv->parent_irq and priv->num_gpios must be set before calling */ +static int brcmstb_gpio_irq_setup(struct platform_device *pdev, + struct brcmstb_gpio_priv *priv) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + int err; + + priv->irq_domain = + irq_domain_add_linear(np, priv->num_gpios, + &brcmstb_gpio_irq_domain_ops, + priv); + if (!priv->irq_domain) { + dev_err(dev, "Couldn't allocate IRQ domain\n"); + return -ENXIO; + } + + if (of_property_read_bool(np, "wakeup-source")) { + priv->parent_wake_irq = platform_get_irq(pdev, 1); + if (priv->parent_wake_irq < 0) { + priv->parent_wake_irq = 0; + dev_warn(dev, + "Couldn't get wake IRQ - GPIOs will not be able to wake from sleep"); + } else { + /* + * Set wakeup capability so we can process boot-time + * "wakeups" (e.g., from S5 cold boot) + */ + device_set_wakeup_capable(dev, true); + device_wakeup_enable(dev); + err = devm_request_irq(dev, priv->parent_wake_irq, + brcmstb_gpio_wake_irq_handler, + IRQF_SHARED, + "brcmstb-gpio-wake", priv); + + if (err < 0) { + dev_err(dev, "Couldn't request wake IRQ"); + goto out_free_domain; + } + } + } + + priv->irq_chip.name = dev_name(dev); + priv->irq_chip.irq_disable = brcmstb_gpio_irq_mask; + priv->irq_chip.irq_mask = brcmstb_gpio_irq_mask; + priv->irq_chip.irq_unmask = brcmstb_gpio_irq_unmask; + priv->irq_chip.irq_ack = brcmstb_gpio_irq_ack; + priv->irq_chip.irq_set_type = brcmstb_gpio_irq_set_type; + + if (priv->parent_wake_irq) + priv->irq_chip.irq_set_wake = brcmstb_gpio_irq_set_wake; + + irq_set_chained_handler_and_data(priv->parent_irq, + brcmstb_gpio_irq_handler, priv); + irq_set_status_flags(priv->parent_irq, IRQ_DISABLE_UNLAZY); + + return 0; + +out_free_domain: + irq_domain_remove(priv->irq_domain); + + return err; +} + +static void brcmstb_gpio_bank_save(struct brcmstb_gpio_priv *priv, + struct brcmstb_gpio_bank *bank) +{ + struct gpio_chip *gc = &bank->gc; + unsigned int i; + + for (i = 0; i < GIO_REG_STAT; i++) + bank->saved_regs[i] = gc->read_reg(priv->reg_base + + GIO_BANK_OFF(bank->id, i)); +} + +static void brcmstb_gpio_quiesce(struct device *dev, bool save) +{ + struct brcmstb_gpio_priv *priv = dev_get_drvdata(dev); + struct brcmstb_gpio_bank *bank; + struct gpio_chip *gc; + u32 imask; + + /* disable non-wake interrupt */ + if (priv->parent_irq >= 0) + disable_irq(priv->parent_irq); + + list_for_each_entry(bank, &priv->bank_list, node) { + gc = &bank->gc; + + if (save) + brcmstb_gpio_bank_save(priv, bank); + + /* Unmask GPIOs which have been flagged as wake-up sources */ + if (priv->parent_wake_irq) + imask = bank->wake_active; + else + imask = 0; + gc->write_reg(priv->reg_base + GIO_MASK(bank->id), + imask); + } +} + +static void brcmstb_gpio_shutdown(struct platform_device *pdev) +{ + /* Enable GPIO for S5 cold boot */ + brcmstb_gpio_quiesce(&pdev->dev, false); +} + +#ifdef CONFIG_PM_SLEEP +static void brcmstb_gpio_bank_restore(struct brcmstb_gpio_priv *priv, + struct brcmstb_gpio_bank *bank) +{ + struct gpio_chip *gc = &bank->gc; + unsigned int i; + + for (i = 0; i < GIO_REG_STAT; i++) + gc->write_reg(priv->reg_base + GIO_BANK_OFF(bank->id, i), + bank->saved_regs[i]); +} + +static int brcmstb_gpio_suspend(struct device *dev) +{ + brcmstb_gpio_quiesce(dev, true); + return 0; +} + +static int brcmstb_gpio_resume(struct device *dev) +{ + struct brcmstb_gpio_priv *priv = dev_get_drvdata(dev); + struct brcmstb_gpio_bank *bank; + bool need_wakeup_event = false; + + list_for_each_entry(bank, &priv->bank_list, node) { + need_wakeup_event |= !!__brcmstb_gpio_get_active_irqs(bank); + brcmstb_gpio_bank_restore(priv, bank); + } + + if (priv->parent_wake_irq && need_wakeup_event) + pm_wakeup_event(dev, 0); + + /* enable non-wake interrupt */ + if (priv->parent_irq >= 0) + enable_irq(priv->parent_irq); + + return 0; +} + +#else +#define brcmstb_gpio_suspend NULL +#define brcmstb_gpio_resume NULL +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops brcmstb_gpio_pm_ops = { + .suspend_noirq = brcmstb_gpio_suspend, + .resume_noirq = brcmstb_gpio_resume, +}; + +static int brcmstb_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + void __iomem *reg_base; + struct brcmstb_gpio_priv *priv; + struct resource *res; + struct property *prop; + const __be32 *p; + u32 bank_width; + int num_banks = 0; + int err; + static int gpio_base; + unsigned long flags = 0; + bool need_wakeup_event = false; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + platform_set_drvdata(pdev, priv); + INIT_LIST_HEAD(&priv->bank_list); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg_base = devm_ioremap_resource(dev, res); + if (IS_ERR(reg_base)) + return PTR_ERR(reg_base); + + priv->gpio_base = gpio_base; + priv->reg_base = reg_base; + priv->pdev = pdev; + + if (of_property_read_bool(np, "interrupt-controller")) { + priv->parent_irq = platform_get_irq(pdev, 0); + if (priv->parent_irq <= 0) { + dev_err(dev, "Couldn't get IRQ"); + return -ENOENT; + } + } else { + priv->parent_irq = -ENOENT; + } + + if (brcmstb_gpio_sanity_check_banks(dev, np, res)) + return -EINVAL; + + /* + * MIPS endianness is configured by boot strap, which also reverses all + * bus endianness (i.e., big-endian CPU + big endian bus ==> native + * endian I/O). + * + * Other architectures (e.g., ARM) either do not support big endian, or + * else leave I/O in little endian mode. + */ +#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN) + flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER; +#endif + + of_property_for_each_u32(np, "brcm,gpio-bank-widths", prop, p, + bank_width) { + struct brcmstb_gpio_bank *bank; + struct gpio_chip *gc; + + /* + * If bank_width is 0, then there is an empty bank in the + * register block. Special handling for this case. + */ + if (bank_width == 0) { + dev_dbg(dev, "Width 0 found: Empty bank @ %d\n", + num_banks); + num_banks++; + gpio_base += MAX_GPIO_PER_BANK; + continue; + } + + bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL); + if (!bank) { + err = -ENOMEM; + goto fail; + } + + bank->parent_priv = priv; + bank->id = num_banks; + if (bank_width <= 0 || bank_width > MAX_GPIO_PER_BANK) { + dev_err(dev, "Invalid bank width %d\n", bank_width); + err = -EINVAL; + goto fail; + } else { + bank->width = bank_width; + } + + /* + * Regs are 4 bytes wide, have data reg, no set/clear regs, + * and direction bits have 0 = output and 1 = input + */ + gc = &bank->gc; + err = bgpio_init(gc, dev, 4, + reg_base + GIO_DATA(bank->id), + NULL, NULL, NULL, + reg_base + GIO_IODIR(bank->id), flags); + if (err) { + dev_err(dev, "bgpio_init() failed\n"); + goto fail; + } + + gc->of_node = np; + gc->owner = THIS_MODULE; + gc->label = devm_kasprintf(dev, GFP_KERNEL, "%pOF", dev->of_node); + if (!gc->label) { + err = -ENOMEM; + goto fail; + } + gc->base = gpio_base; + gc->of_gpio_n_cells = 2; + gc->of_xlate = brcmstb_gpio_of_xlate; + /* not all ngpio lines are valid, will use bank width later */ + gc->ngpio = MAX_GPIO_PER_BANK; + if (priv->parent_irq > 0) + gc->to_irq = brcmstb_gpio_to_irq; + + /* + * Mask all interrupts by default, since wakeup interrupts may + * be retained from S5 cold boot + */ + need_wakeup_event |= !!__brcmstb_gpio_get_active_irqs(bank); + gc->write_reg(reg_base + GIO_MASK(bank->id), 0); + + err = gpiochip_add_data(gc, bank); + if (err) { + dev_err(dev, "Could not add gpiochip for bank %d\n", + bank->id); + goto fail; + } + gpio_base += gc->ngpio; + + dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id, + gc->base, gc->ngpio, bank->width); + + /* Everything looks good, so add bank to list */ + list_add(&bank->node, &priv->bank_list); + + num_banks++; + } + + priv->num_gpios = gpio_base - priv->gpio_base; + if (priv->parent_irq > 0) { + err = brcmstb_gpio_irq_setup(pdev, priv); + if (err) + goto fail; + } + + if (priv->parent_wake_irq && need_wakeup_event) + pm_wakeup_event(dev, 0); + + return 0; + +fail: + (void) brcmstb_gpio_remove(pdev); + return err; +} + +static const struct of_device_id brcmstb_gpio_of_match[] = { + { .compatible = "brcm,brcmstb-gpio" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, brcmstb_gpio_of_match); + +static struct platform_driver brcmstb_gpio_driver = { + .driver = { + .name = "brcmstb-gpio", + .of_match_table = brcmstb_gpio_of_match, + .pm = &brcmstb_gpio_pm_ops, + }, + .probe = brcmstb_gpio_probe, + .remove = brcmstb_gpio_remove, + .shutdown = brcmstb_gpio_shutdown, +}; +module_platform_driver(brcmstb_gpio_driver); + +MODULE_AUTHOR("Gregory Fong"); +MODULE_DESCRIPTION("Driver for Broadcom BRCMSTB SoC UPG GPIO"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-bt8xx.c b/drivers/gpio/gpio-bt8xx.c new file mode 100644 index 000000000..b8ec75cbd --- /dev/null +++ b/drivers/gpio/gpio-bt8xx.c @@ -0,0 +1,323 @@ +/* + + bt8xx GPIO abuser + + Copyright (C) 2008 Michael Buesch <m@bues.ch> + + Please do _only_ contact the people listed _above_ with issues related to this driver. + All the other people listed below are not related to this driver. Their names + are only here, because this driver is derived from the bt848 driver. + + + Derived from the bt848 driver: + + Copyright (C) 1996,97,98 Ralph Metzler + & Marcus Metzler + (c) 1999-2002 Gerd Knorr + + some v4l2 code lines are taken from Justin's bttv2 driver which is + (c) 2000 Justin Schoeman + + V4L1 removal from: + (c) 2005-2006 Nickolay V. Shmyrev + + Fixes to be fully V4L2 compliant by + (c) 2006 Mauro Carvalho Chehab + + Cropping and overscan support + Copyright (C) 2005, 2006 Michael H. Schimek + Sponsored by OPQ Systems AB + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/gpio/driver.h> +#include <linux/slab.h> + +/* Steal the hardware definitions from the bttv driver. */ +#include "../media/pci/bt8xx/bt848.h" + + +#define BT8XXGPIO_NR_GPIOS 24 /* We have 24 GPIO pins */ + + +struct bt8xxgpio { + spinlock_t lock; + + void __iomem *mmio; + struct pci_dev *pdev; + struct gpio_chip gpio; + +#ifdef CONFIG_PM + u32 saved_outen; + u32 saved_data; +#endif +}; + +#define bgwrite(dat, adr) writel((dat), bg->mmio+(adr)) +#define bgread(adr) readl(bg->mmio+(adr)) + + +static int modparam_gpiobase = -1/* dynamic */; +module_param_named(gpiobase, modparam_gpiobase, int, 0444); +MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default."); + + +static int bt8xxgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) +{ + struct bt8xxgpio *bg = gpiochip_get_data(gpio); + unsigned long flags; + u32 outen, data; + + spin_lock_irqsave(&bg->lock, flags); + + data = bgread(BT848_GPIO_DATA); + data &= ~(1 << nr); + bgwrite(data, BT848_GPIO_DATA); + + outen = bgread(BT848_GPIO_OUT_EN); + outen &= ~(1 << nr); + bgwrite(outen, BT848_GPIO_OUT_EN); + + spin_unlock_irqrestore(&bg->lock, flags); + + return 0; +} + +static int bt8xxgpio_gpio_get(struct gpio_chip *gpio, unsigned nr) +{ + struct bt8xxgpio *bg = gpiochip_get_data(gpio); + unsigned long flags; + u32 val; + + spin_lock_irqsave(&bg->lock, flags); + val = bgread(BT848_GPIO_DATA); + spin_unlock_irqrestore(&bg->lock, flags); + + return !!(val & (1 << nr)); +} + +static int bt8xxgpio_gpio_direction_output(struct gpio_chip *gpio, + unsigned nr, int val) +{ + struct bt8xxgpio *bg = gpiochip_get_data(gpio); + unsigned long flags; + u32 outen, data; + + spin_lock_irqsave(&bg->lock, flags); + + outen = bgread(BT848_GPIO_OUT_EN); + outen |= (1 << nr); + bgwrite(outen, BT848_GPIO_OUT_EN); + + data = bgread(BT848_GPIO_DATA); + if (val) + data |= (1 << nr); + else + data &= ~(1 << nr); + bgwrite(data, BT848_GPIO_DATA); + + spin_unlock_irqrestore(&bg->lock, flags); + + return 0; +} + +static void bt8xxgpio_gpio_set(struct gpio_chip *gpio, + unsigned nr, int val) +{ + struct bt8xxgpio *bg = gpiochip_get_data(gpio); + unsigned long flags; + u32 data; + + spin_lock_irqsave(&bg->lock, flags); + + data = bgread(BT848_GPIO_DATA); + if (val) + data |= (1 << nr); + else + data &= ~(1 << nr); + bgwrite(data, BT848_GPIO_DATA); + + spin_unlock_irqrestore(&bg->lock, flags); +} + +static void bt8xxgpio_gpio_setup(struct bt8xxgpio *bg) +{ + struct gpio_chip *c = &bg->gpio; + + c->label = dev_name(&bg->pdev->dev); + c->owner = THIS_MODULE; + c->direction_input = bt8xxgpio_gpio_direction_input; + c->get = bt8xxgpio_gpio_get; + c->direction_output = bt8xxgpio_gpio_direction_output; + c->set = bt8xxgpio_gpio_set; + c->dbg_show = NULL; + c->base = modparam_gpiobase; + c->ngpio = BT8XXGPIO_NR_GPIOS; + c->can_sleep = false; +} + +static int bt8xxgpio_probe(struct pci_dev *dev, + const struct pci_device_id *pci_id) +{ + struct bt8xxgpio *bg; + int err; + + bg = devm_kzalloc(&dev->dev, sizeof(struct bt8xxgpio), GFP_KERNEL); + if (!bg) + return -ENOMEM; + + bg->pdev = dev; + spin_lock_init(&bg->lock); + + err = pci_enable_device(dev); + if (err) { + printk(KERN_ERR "bt8xxgpio: Can't enable device.\n"); + return err; + } + if (!devm_request_mem_region(&dev->dev, pci_resource_start(dev, 0), + pci_resource_len(dev, 0), + "bt8xxgpio")) { + printk(KERN_WARNING "bt8xxgpio: Can't request iomem (0x%llx).\n", + (unsigned long long)pci_resource_start(dev, 0)); + err = -EBUSY; + goto err_disable; + } + pci_set_master(dev); + pci_set_drvdata(dev, bg); + + bg->mmio = devm_ioremap(&dev->dev, pci_resource_start(dev, 0), 0x1000); + if (!bg->mmio) { + printk(KERN_ERR "bt8xxgpio: ioremap() failed\n"); + err = -EIO; + goto err_disable; + } + + /* Disable interrupts */ + bgwrite(0, BT848_INT_MASK); + + /* gpio init */ + bgwrite(0, BT848_GPIO_DMA_CTL); + bgwrite(0, BT848_GPIO_REG_INP); + bgwrite(0, BT848_GPIO_OUT_EN); + + bt8xxgpio_gpio_setup(bg); + err = gpiochip_add_data(&bg->gpio, bg); + if (err) { + printk(KERN_ERR "bt8xxgpio: Failed to register GPIOs\n"); + goto err_disable; + } + + return 0; + +err_disable: + pci_disable_device(dev); + + return err; +} + +static void bt8xxgpio_remove(struct pci_dev *pdev) +{ + struct bt8xxgpio *bg = pci_get_drvdata(pdev); + + gpiochip_remove(&bg->gpio); + + bgwrite(0, BT848_INT_MASK); + bgwrite(~0x0, BT848_INT_STAT); + bgwrite(0x0, BT848_GPIO_OUT_EN); + + pci_disable_device(pdev); +} + +#ifdef CONFIG_PM +static int bt8xxgpio_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct bt8xxgpio *bg = pci_get_drvdata(pdev); + unsigned long flags; + + spin_lock_irqsave(&bg->lock, flags); + + bg->saved_outen = bgread(BT848_GPIO_OUT_EN); + bg->saved_data = bgread(BT848_GPIO_DATA); + + bgwrite(0, BT848_INT_MASK); + bgwrite(~0x0, BT848_INT_STAT); + bgwrite(0x0, BT848_GPIO_OUT_EN); + + spin_unlock_irqrestore(&bg->lock, flags); + + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int bt8xxgpio_resume(struct pci_dev *pdev) +{ + struct bt8xxgpio *bg = pci_get_drvdata(pdev); + unsigned long flags; + int err; + + pci_set_power_state(pdev, PCI_D0); + err = pci_enable_device(pdev); + if (err) + return err; + pci_restore_state(pdev); + + spin_lock_irqsave(&bg->lock, flags); + + bgwrite(0, BT848_INT_MASK); + bgwrite(0, BT848_GPIO_DMA_CTL); + bgwrite(0, BT848_GPIO_REG_INP); + bgwrite(bg->saved_outen, BT848_GPIO_OUT_EN); + bgwrite(bg->saved_data & bg->saved_outen, + BT848_GPIO_DATA); + + spin_unlock_irqrestore(&bg->lock, flags); + + return 0; +} +#else +#define bt8xxgpio_suspend NULL +#define bt8xxgpio_resume NULL +#endif /* CONFIG_PM */ + +static const struct pci_device_id bt8xxgpio_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879) }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, bt8xxgpio_pci_tbl); + +static struct pci_driver bt8xxgpio_pci_driver = { + .name = "bt8xxgpio", + .id_table = bt8xxgpio_pci_tbl, + .probe = bt8xxgpio_probe, + .remove = bt8xxgpio_remove, + .suspend = bt8xxgpio_suspend, + .resume = bt8xxgpio_resume, +}; + +module_pci_driver(bt8xxgpio_pci_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Buesch"); +MODULE_DESCRIPTION("Abuse a BT8xx framegrabber card as generic GPIO card"); diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c new file mode 100644 index 000000000..52fd63f02 --- /dev/null +++ b/drivers/gpio/gpio-clps711x.c @@ -0,0 +1,95 @@ +/* + * CLPS711X GPIO driver + * + * Copyright (C) 2012,2013 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/gpio/driver.h> +#include <linux/platform_device.h> + +static int clps711x_gpio_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + void __iomem *dat, *dir; + struct gpio_chip *gc; + struct resource *res; + int err, id; + + if (!np) + return -ENODEV; + + id = of_alias_get_id(np, "gpio"); + if ((id < 0) || (id > 4)) + return -ENODEV; + + gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL); + if (!gc) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dat = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dat)) + return PTR_ERR(dat); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + dir = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dir)) + return PTR_ERR(dir); + + switch (id) { + case 3: + /* PORTD is inverted logic for direction register */ + err = bgpio_init(gc, &pdev->dev, 1, dat, NULL, NULL, + NULL, dir, 0); + break; + default: + err = bgpio_init(gc, &pdev->dev, 1, dat, NULL, NULL, + dir, NULL, 0); + break; + } + + if (err) + return err; + + switch (id) { + case 4: + /* PORTE is 3 lines only */ + gc->ngpio = 3; + break; + default: + break; + } + + gc->base = -1; + gc->owner = THIS_MODULE; + platform_set_drvdata(pdev, gc); + + return devm_gpiochip_add_data(&pdev->dev, gc, NULL); +} + +static const struct of_device_id __maybe_unused clps711x_gpio_ids[] = { + { .compatible = "cirrus,ep7209-gpio" }, + { } +}; +MODULE_DEVICE_TABLE(of, clps711x_gpio_ids); + +static struct platform_driver clps711x_gpio_driver = { + .driver = { + .name = "clps711x-gpio", + .of_match_table = of_match_ptr(clps711x_gpio_ids), + }, + .probe = clps711x_gpio_probe, +}; +module_platform_driver(clps711x_gpio_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); +MODULE_DESCRIPTION("CLPS711X GPIO driver"); +MODULE_ALIAS("platform:clps711x-gpio"); diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c new file mode 100644 index 000000000..58531d8b8 --- /dev/null +++ b/drivers/gpio/gpio-crystalcove.c @@ -0,0 +1,410 @@ +/* + * gpio-crystalcove.c - Intel Crystal Cove GPIO Driver + * + * Copyright (C) 2012, 2014 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Author: Yang, Bin <bin.yang@intel.com> + */ + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio/driver.h> +#include <linux/seq_file.h> +#include <linux/bitops.h> +#include <linux/regmap.h> +#include <linux/mfd/intel_soc_pmic.h> + +#define CRYSTALCOVE_GPIO_NUM 16 +#define CRYSTALCOVE_VGPIO_NUM 95 + +#define UPDATE_IRQ_TYPE BIT(0) +#define UPDATE_IRQ_MASK BIT(1) + +#define GPIO0IRQ 0x0b +#define GPIO1IRQ 0x0c +#define MGPIO0IRQS0 0x19 +#define MGPIO1IRQS0 0x1a +#define MGPIO0IRQSX 0x1b +#define MGPIO1IRQSX 0x1c +#define GPIO0P0CTLO 0x2b +#define GPIO0P0CTLI 0x33 +#define GPIO1P0CTLO 0x3b +#define GPIO1P0CTLI 0x43 +#define GPIOPANELCTL 0x52 + +#define CTLI_INTCNT_DIS (0) +#define CTLI_INTCNT_NE (1 << 1) +#define CTLI_INTCNT_PE (2 << 1) +#define CTLI_INTCNT_BE (3 << 1) + +#define CTLO_DIR_IN (0) +#define CTLO_DIR_OUT (1 << 5) + +#define CTLO_DRV_CMOS (0) +#define CTLO_DRV_OD (1 << 4) + +#define CTLO_DRV_REN (1 << 3) + +#define CTLO_RVAL_2KDW (0) +#define CTLO_RVAL_2KUP (1 << 1) +#define CTLO_RVAL_50KDW (2 << 1) +#define CTLO_RVAL_50KUP (3 << 1) + +#define CTLO_INPUT_SET (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP) +#define CTLO_OUTPUT_SET (CTLO_DIR_OUT | CTLO_INPUT_SET) + +enum ctrl_register { + CTRL_IN, + CTRL_OUT, +}; + +/** + * struct crystalcove_gpio - Crystal Cove GPIO controller + * @buslock: for bus lock/sync and unlock. + * @chip: the abstract gpio_chip structure. + * @regmap: the regmap from the parent device. + * @update: pending IRQ setting update, to be written to the chip upon unlock. + * @intcnt_value: the Interrupt Detect value to be written. + * @set_irq_mask: true if the IRQ mask needs to be set, false to clear. + */ +struct crystalcove_gpio { + struct mutex buslock; /* irq_bus_lock */ + struct gpio_chip chip; + struct regmap *regmap; + int update; + int intcnt_value; + bool set_irq_mask; +}; + +static inline int to_reg(int gpio, enum ctrl_register reg_type) +{ + int reg; + + if (gpio >= CRYSTALCOVE_GPIO_NUM) { + /* + * Virtual GPIO called from ACPI, for now we only support + * the panel ctl. + */ + switch (gpio) { + case 0x5e: + return GPIOPANELCTL; + default: + return -EOPNOTSUPP; + } + } + + if (reg_type == CTRL_IN) { + if (gpio < 8) + reg = GPIO0P0CTLI; + else + reg = GPIO1P0CTLI; + } else { + if (gpio < 8) + reg = GPIO0P0CTLO; + else + reg = GPIO1P0CTLO; + } + + return reg + gpio % 8; +} + +static void crystalcove_update_irq_mask(struct crystalcove_gpio *cg, + int gpio) +{ + u8 mirqs0 = gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0; + int mask = BIT(gpio % 8); + + if (cg->set_irq_mask) + regmap_update_bits(cg->regmap, mirqs0, mask, mask); + else + regmap_update_bits(cg->regmap, mirqs0, mask, 0); +} + +static void crystalcove_update_irq_ctrl(struct crystalcove_gpio *cg, int gpio) +{ + int reg = to_reg(gpio, CTRL_IN); + + regmap_update_bits(cg->regmap, reg, CTLI_INTCNT_BE, cg->intcnt_value); +} + +static int crystalcove_gpio_dir_in(struct gpio_chip *chip, unsigned gpio) +{ + struct crystalcove_gpio *cg = gpiochip_get_data(chip); + int reg = to_reg(gpio, CTRL_OUT); + + if (reg < 0) + return 0; + + return regmap_write(cg->regmap, reg, CTLO_INPUT_SET); +} + +static int crystalcove_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, + int value) +{ + struct crystalcove_gpio *cg = gpiochip_get_data(chip); + int reg = to_reg(gpio, CTRL_OUT); + + if (reg < 0) + return 0; + + return regmap_write(cg->regmap, reg, CTLO_OUTPUT_SET | value); +} + +static int crystalcove_gpio_get(struct gpio_chip *chip, unsigned gpio) +{ + struct crystalcove_gpio *cg = gpiochip_get_data(chip); + unsigned int val; + int ret, reg = to_reg(gpio, CTRL_IN); + + if (reg < 0) + return 0; + + ret = regmap_read(cg->regmap, reg, &val); + if (ret) + return ret; + + return val & 0x1; +} + +static void crystalcove_gpio_set(struct gpio_chip *chip, + unsigned gpio, int value) +{ + struct crystalcove_gpio *cg = gpiochip_get_data(chip); + int reg = to_reg(gpio, CTRL_OUT); + + if (reg < 0) + return; + + if (value) + regmap_update_bits(cg->regmap, reg, 1, 1); + else + regmap_update_bits(cg->regmap, reg, 1, 0); +} + +static int crystalcove_irq_type(struct irq_data *data, unsigned type) +{ + struct crystalcove_gpio *cg = + gpiochip_get_data(irq_data_get_irq_chip_data(data)); + + if (data->hwirq >= CRYSTALCOVE_GPIO_NUM) + return 0; + + switch (type) { + case IRQ_TYPE_NONE: + cg->intcnt_value = CTLI_INTCNT_DIS; + break; + case IRQ_TYPE_EDGE_BOTH: + cg->intcnt_value = CTLI_INTCNT_BE; + break; + case IRQ_TYPE_EDGE_RISING: + cg->intcnt_value = CTLI_INTCNT_PE; + break; + case IRQ_TYPE_EDGE_FALLING: + cg->intcnt_value = CTLI_INTCNT_NE; + break; + default: + return -EINVAL; + } + + cg->update |= UPDATE_IRQ_TYPE; + + return 0; +} + +static void crystalcove_bus_lock(struct irq_data *data) +{ + struct crystalcove_gpio *cg = + gpiochip_get_data(irq_data_get_irq_chip_data(data)); + + mutex_lock(&cg->buslock); +} + +static void crystalcove_bus_sync_unlock(struct irq_data *data) +{ + struct crystalcove_gpio *cg = + gpiochip_get_data(irq_data_get_irq_chip_data(data)); + int gpio = data->hwirq; + + if (cg->update & UPDATE_IRQ_TYPE) + crystalcove_update_irq_ctrl(cg, gpio); + if (cg->update & UPDATE_IRQ_MASK) + crystalcove_update_irq_mask(cg, gpio); + cg->update = 0; + + mutex_unlock(&cg->buslock); +} + +static void crystalcove_irq_unmask(struct irq_data *data) +{ + struct crystalcove_gpio *cg = + gpiochip_get_data(irq_data_get_irq_chip_data(data)); + + if (data->hwirq < CRYSTALCOVE_GPIO_NUM) { + cg->set_irq_mask = false; + cg->update |= UPDATE_IRQ_MASK; + } +} + +static void crystalcove_irq_mask(struct irq_data *data) +{ + struct crystalcove_gpio *cg = + gpiochip_get_data(irq_data_get_irq_chip_data(data)); + + if (data->hwirq < CRYSTALCOVE_GPIO_NUM) { + cg->set_irq_mask = true; + cg->update |= UPDATE_IRQ_MASK; + } +} + +static struct irq_chip crystalcove_irqchip = { + .name = "Crystal Cove", + .irq_mask = crystalcove_irq_mask, + .irq_unmask = crystalcove_irq_unmask, + .irq_set_type = crystalcove_irq_type, + .irq_bus_lock = crystalcove_bus_lock, + .irq_bus_sync_unlock = crystalcove_bus_sync_unlock, + .flags = IRQCHIP_SKIP_SET_WAKE, +}; + +static irqreturn_t crystalcove_gpio_irq_handler(int irq, void *data) +{ + struct crystalcove_gpio *cg = data; + unsigned int p0, p1; + int pending; + int gpio; + unsigned int virq; + + if (regmap_read(cg->regmap, GPIO0IRQ, &p0) || + regmap_read(cg->regmap, GPIO1IRQ, &p1)) + return IRQ_NONE; + + regmap_write(cg->regmap, GPIO0IRQ, p0); + regmap_write(cg->regmap, GPIO1IRQ, p1); + + pending = p0 | p1 << 8; + + for (gpio = 0; gpio < CRYSTALCOVE_GPIO_NUM; gpio++) { + if (pending & BIT(gpio)) { + virq = irq_find_mapping(cg->chip.irq.domain, gpio); + handle_nested_irq(virq); + } + } + + return IRQ_HANDLED; +} + +static void crystalcove_gpio_dbg_show(struct seq_file *s, + struct gpio_chip *chip) +{ + struct crystalcove_gpio *cg = gpiochip_get_data(chip); + int gpio, offset; + unsigned int ctlo, ctli, mirqs0, mirqsx, irq; + + for (gpio = 0; gpio < CRYSTALCOVE_GPIO_NUM; gpio++) { + regmap_read(cg->regmap, to_reg(gpio, CTRL_OUT), &ctlo); + regmap_read(cg->regmap, to_reg(gpio, CTRL_IN), &ctli); + regmap_read(cg->regmap, gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0, + &mirqs0); + regmap_read(cg->regmap, gpio < 8 ? MGPIO0IRQSX : MGPIO1IRQSX, + &mirqsx); + regmap_read(cg->regmap, gpio < 8 ? GPIO0IRQ : GPIO1IRQ, + &irq); + + offset = gpio % 8; + seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s %s\n", + gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ", + ctli & 0x1 ? "hi" : "lo", + ctli & CTLI_INTCNT_NE ? "fall" : " ", + ctli & CTLI_INTCNT_PE ? "rise" : " ", + ctlo, + mirqs0 & BIT(offset) ? "s0 mask " : "s0 unmask", + mirqsx & BIT(offset) ? "sx mask " : "sx unmask", + irq & BIT(offset) ? "pending" : " "); + } +} + +static int crystalcove_gpio_probe(struct platform_device *pdev) +{ + int irq = platform_get_irq(pdev, 0); + struct crystalcove_gpio *cg; + int retval; + struct device *dev = pdev->dev.parent; + struct intel_soc_pmic *pmic = dev_get_drvdata(dev); + + if (irq < 0) + return irq; + + cg = devm_kzalloc(&pdev->dev, sizeof(*cg), GFP_KERNEL); + if (!cg) + return -ENOMEM; + + platform_set_drvdata(pdev, cg); + + mutex_init(&cg->buslock); + cg->chip.label = KBUILD_MODNAME; + cg->chip.direction_input = crystalcove_gpio_dir_in; + cg->chip.direction_output = crystalcove_gpio_dir_out; + cg->chip.get = crystalcove_gpio_get; + cg->chip.set = crystalcove_gpio_set; + cg->chip.base = -1; + cg->chip.ngpio = CRYSTALCOVE_VGPIO_NUM; + cg->chip.can_sleep = true; + cg->chip.parent = dev; + cg->chip.dbg_show = crystalcove_gpio_dbg_show; + cg->regmap = pmic->regmap; + + retval = devm_gpiochip_add_data(&pdev->dev, &cg->chip, cg); + if (retval) { + dev_warn(&pdev->dev, "add gpio chip error: %d\n", retval); + return retval; + } + + gpiochip_irqchip_add_nested(&cg->chip, &crystalcove_irqchip, 0, + handle_simple_irq, IRQ_TYPE_NONE); + + retval = request_threaded_irq(irq, NULL, crystalcove_gpio_irq_handler, + IRQF_ONESHOT, KBUILD_MODNAME, cg); + + if (retval) { + dev_warn(&pdev->dev, "request irq failed: %d\n", retval); + return retval; + } + + gpiochip_set_nested_irqchip(&cg->chip, &crystalcove_irqchip, irq); + + return 0; +} + +static int crystalcove_gpio_remove(struct platform_device *pdev) +{ + struct crystalcove_gpio *cg = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + if (irq >= 0) + free_irq(irq, cg); + return 0; +} + +static struct platform_driver crystalcove_gpio_driver = { + .probe = crystalcove_gpio_probe, + .remove = crystalcove_gpio_remove, + .driver = { + .name = "crystal_cove_gpio", + }, +}; + +module_platform_driver(crystalcove_gpio_driver); + +MODULE_AUTHOR("Yang, Bin <bin.yang@intel.com>"); +MODULE_DESCRIPTION("Intel Crystal Cove GPIO Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-cs5535.c b/drivers/gpio/gpio-cs5535.c new file mode 100644 index 000000000..8814c8f47 --- /dev/null +++ b/drivers/gpio/gpio-cs5535.c @@ -0,0 +1,371 @@ +/* + * AMD CS5535/CS5536 GPIO driver + * Copyright (C) 2006 Advanced Micro Devices, Inc. + * Copyright (C) 2007-2009 Andres Salomon <dilinger@collabora.co.uk> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/cs5535.h> +#include <asm/msr.h> + +#define DRV_NAME "cs5535-gpio" + +/* + * Some GPIO pins + * 31-29,23 : reserved (always mask out) + * 28 : Power Button + * 26 : PME# + * 22-16 : LPC + * 14,15 : SMBus + * 9,8 : UART1 + * 7 : PCI INTB + * 3,4 : UART2/DDC + * 2 : IDE_IRQ0 + * 1 : AC_BEEP + * 0 : PCI INTA + * + * If a mask was not specified, allow all except + * reserved and Power Button + */ +#define GPIO_DEFAULT_MASK 0x0F7FFFFF + +static ulong mask = GPIO_DEFAULT_MASK; +module_param_named(mask, mask, ulong, 0444); +MODULE_PARM_DESC(mask, "GPIO channel mask."); + +/* + * FIXME: convert this singleton driver to use the state container + * design pattern, see Documentation/driver-model/design-patterns.txt + */ +static struct cs5535_gpio_chip { + struct gpio_chip chip; + resource_size_t base; + + struct platform_device *pdev; + spinlock_t lock; +} cs5535_gpio_chip; + +/* + * The CS5535/CS5536 GPIOs support a number of extra features not defined + * by the gpio_chip API, so these are exported. For a full list of the + * registers, see include/linux/cs5535.h. + */ + +static void errata_outl(struct cs5535_gpio_chip *chip, u32 val, + unsigned int reg) +{ + unsigned long addr = chip->base + 0x80 + reg; + + /* + * According to the CS5536 errata (#36), after suspend + * a write to the high bank GPIO register will clear all + * non-selected bits; the recommended workaround is a + * read-modify-write operation. + * + * Don't apply this errata to the edge status GPIOs, as writing + * to their lower bits will clear them. + */ + if (reg != GPIO_POSITIVE_EDGE_STS && reg != GPIO_NEGATIVE_EDGE_STS) { + if (val & 0xffff) + val |= (inl(addr) & 0xffff); /* ignore the high bits */ + else + val |= (inl(addr) ^ (val >> 16)); + } + outl(val, addr); +} + +static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset, + unsigned int reg) +{ + if (offset < 16) + /* low bank register */ + outl(1 << offset, chip->base + reg); + else + /* high bank register */ + errata_outl(chip, 1 << (offset - 16), reg); +} + +void cs5535_gpio_set(unsigned offset, unsigned int reg) +{ + struct cs5535_gpio_chip *chip = &cs5535_gpio_chip; + unsigned long flags; + + spin_lock_irqsave(&chip->lock, flags); + __cs5535_gpio_set(chip, offset, reg); + spin_unlock_irqrestore(&chip->lock, flags); +} +EXPORT_SYMBOL_GPL(cs5535_gpio_set); + +static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset, + unsigned int reg) +{ + if (offset < 16) + /* low bank register */ + outl(1 << (offset + 16), chip->base + reg); + else + /* high bank register */ + errata_outl(chip, 1 << offset, reg); +} + +void cs5535_gpio_clear(unsigned offset, unsigned int reg) +{ + struct cs5535_gpio_chip *chip = &cs5535_gpio_chip; + unsigned long flags; + + spin_lock_irqsave(&chip->lock, flags); + __cs5535_gpio_clear(chip, offset, reg); + spin_unlock_irqrestore(&chip->lock, flags); +} +EXPORT_SYMBOL_GPL(cs5535_gpio_clear); + +int cs5535_gpio_isset(unsigned offset, unsigned int reg) +{ + struct cs5535_gpio_chip *chip = &cs5535_gpio_chip; + unsigned long flags; + long val; + + spin_lock_irqsave(&chip->lock, flags); + if (offset < 16) + /* low bank register */ + val = inl(chip->base + reg); + else { + /* high bank register */ + val = inl(chip->base + 0x80 + reg); + offset -= 16; + } + spin_unlock_irqrestore(&chip->lock, flags); + + return (val & (1 << offset)) ? 1 : 0; +} +EXPORT_SYMBOL_GPL(cs5535_gpio_isset); + +int cs5535_gpio_set_irq(unsigned group, unsigned irq) +{ + uint32_t lo, hi; + + if (group > 7 || irq > 15) + return -EINVAL; + + rdmsr(MSR_PIC_ZSEL_HIGH, lo, hi); + + lo &= ~(0xF << (group * 4)); + lo |= (irq & 0xF) << (group * 4); + + wrmsr(MSR_PIC_ZSEL_HIGH, lo, hi); + return 0; +} +EXPORT_SYMBOL_GPL(cs5535_gpio_set_irq); + +void cs5535_gpio_setup_event(unsigned offset, int pair, int pme) +{ + struct cs5535_gpio_chip *chip = &cs5535_gpio_chip; + uint32_t shift = (offset % 8) * 4; + unsigned long flags; + uint32_t val; + + if (offset >= 24) + offset = GPIO_MAP_W; + else if (offset >= 16) + offset = GPIO_MAP_Z; + else if (offset >= 8) + offset = GPIO_MAP_Y; + else + offset = GPIO_MAP_X; + + spin_lock_irqsave(&chip->lock, flags); + val = inl(chip->base + offset); + + /* Clear whatever was there before */ + val &= ~(0xF << shift); + + /* Set the new value */ + val |= ((pair & 7) << shift); + + /* Set the PME bit if this is a PME event */ + if (pme) + val |= (1 << (shift + 3)); + + outl(val, chip->base + offset); + spin_unlock_irqrestore(&chip->lock, flags); +} +EXPORT_SYMBOL_GPL(cs5535_gpio_setup_event); + +/* + * Generic gpio_chip API support. + */ + +static int chip_gpio_request(struct gpio_chip *c, unsigned offset) +{ + struct cs5535_gpio_chip *chip = gpiochip_get_data(c); + unsigned long flags; + + spin_lock_irqsave(&chip->lock, flags); + + /* check if this pin is available */ + if ((mask & (1 << offset)) == 0) { + dev_info(&chip->pdev->dev, + "pin %u is not available (check mask)\n", offset); + spin_unlock_irqrestore(&chip->lock, flags); + return -EINVAL; + } + + /* disable output aux 1 & 2 on this pin */ + __cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_AUX1); + __cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_AUX2); + + /* disable input aux 1 on this pin */ + __cs5535_gpio_clear(chip, offset, GPIO_INPUT_AUX1); + + spin_unlock_irqrestore(&chip->lock, flags); + + return 0; +} + +static int chip_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + return cs5535_gpio_isset(offset, GPIO_READ_BACK); +} + +static void chip_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + if (val) + cs5535_gpio_set(offset, GPIO_OUTPUT_VAL); + else + cs5535_gpio_clear(offset, GPIO_OUTPUT_VAL); +} + +static int chip_direction_input(struct gpio_chip *c, unsigned offset) +{ + struct cs5535_gpio_chip *chip = gpiochip_get_data(c); + unsigned long flags; + + spin_lock_irqsave(&chip->lock, flags); + __cs5535_gpio_set(chip, offset, GPIO_INPUT_ENABLE); + __cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_ENABLE); + spin_unlock_irqrestore(&chip->lock, flags); + + return 0; +} + +static int chip_direction_output(struct gpio_chip *c, unsigned offset, int val) +{ + struct cs5535_gpio_chip *chip = gpiochip_get_data(c); + unsigned long flags; + + spin_lock_irqsave(&chip->lock, flags); + + __cs5535_gpio_set(chip, offset, GPIO_INPUT_ENABLE); + __cs5535_gpio_set(chip, offset, GPIO_OUTPUT_ENABLE); + if (val) + __cs5535_gpio_set(chip, offset, GPIO_OUTPUT_VAL); + else + __cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_VAL); + + spin_unlock_irqrestore(&chip->lock, flags); + + return 0; +} + +static const char * const cs5535_gpio_names[] = { + "GPIO0", "GPIO1", "GPIO2", "GPIO3", + "GPIO4", "GPIO5", "GPIO6", "GPIO7", + "GPIO8", "GPIO9", "GPIO10", "GPIO11", + "GPIO12", "GPIO13", "GPIO14", "GPIO15", + "GPIO16", "GPIO17", "GPIO18", "GPIO19", + "GPIO20", "GPIO21", "GPIO22", NULL, + "GPIO24", "GPIO25", "GPIO26", "GPIO27", + "GPIO28", NULL, NULL, NULL, +}; + +static struct cs5535_gpio_chip cs5535_gpio_chip = { + .chip = { + .owner = THIS_MODULE, + .label = DRV_NAME, + + .base = 0, + .ngpio = 32, + .names = cs5535_gpio_names, + .request = chip_gpio_request, + + .get = chip_gpio_get, + .set = chip_gpio_set, + + .direction_input = chip_direction_input, + .direction_output = chip_direction_output, + }, +}; + +static int cs5535_gpio_probe(struct platform_device *pdev) +{ + struct resource *res; + int err = -EIO; + ulong mask_orig = mask; + + /* There are two ways to get the GPIO base address; one is by + * fetching it from MSR_LBAR_GPIO, the other is by reading the + * PCI BAR info. The latter method is easier (especially across + * different architectures), so we'll stick with that for now. If + * it turns out to be unreliable in the face of crappy BIOSes, we + * can always go back to using MSRs.. */ + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!res) { + dev_err(&pdev->dev, "can't fetch device resource info\n"); + return err; + } + + if (!devm_request_region(&pdev->dev, res->start, resource_size(res), + pdev->name)) { + dev_err(&pdev->dev, "can't request region\n"); + return err; + } + + /* set up the driver-specific struct */ + cs5535_gpio_chip.base = res->start; + cs5535_gpio_chip.pdev = pdev; + spin_lock_init(&cs5535_gpio_chip.lock); + + dev_info(&pdev->dev, "reserved resource region %pR\n", res); + + /* mask out reserved pins */ + mask &= 0x1F7FFFFF; + + /* do not allow pin 28, Power Button, as there's special handling + * in the PMC needed. (note 12, p. 48) */ + mask &= ~(1 << 28); + + if (mask_orig != mask) + dev_info(&pdev->dev, "mask changed from 0x%08lX to 0x%08lX\n", + mask_orig, mask); + + /* finally, register with the generic GPIO API */ + err = devm_gpiochip_add_data(&pdev->dev, &cs5535_gpio_chip.chip, + &cs5535_gpio_chip); + if (err) + return err; + + return 0; +} + +static struct platform_driver cs5535_gpio_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = cs5535_gpio_probe, +}; + +module_platform_driver(cs5535_gpio_driver); + +MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>"); +MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/gpio/gpio-da9052.c b/drivers/gpio/gpio-da9052.c new file mode 100644 index 000000000..b6d3e997e --- /dev/null +++ b/drivers/gpio/gpio-da9052.c @@ -0,0 +1,240 @@ +/* + * GPIO Driver for Dialog DA9052 PMICs. + * + * Copyright(c) 2011 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen@diasemi.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/uaccess.h> +#include <linux/platform_device.h> +#include <linux/gpio/driver.h> +#include <linux/syscalls.h> +#include <linux/seq_file.h> + +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/reg.h> +#include <linux/mfd/da9052/pdata.h> + +#define DA9052_INPUT 1 +#define DA9052_OUTPUT_OPENDRAIN 2 +#define DA9052_OUTPUT_PUSHPULL 3 + +#define DA9052_SUPPLY_VDD_IO1 0 + +#define DA9052_DEBOUNCING_OFF 0 +#define DA9052_DEBOUNCING_ON 1 + +#define DA9052_OUTPUT_LOWLEVEL 0 + +#define DA9052_ACTIVE_LOW 0 +#define DA9052_ACTIVE_HIGH 1 + +#define DA9052_GPIO_MAX_PORTS_PER_REGISTER 8 +#define DA9052_GPIO_SHIFT_COUNT(no) (no%8) +#define DA9052_GPIO_MASK_UPPER_NIBBLE 0xF0 +#define DA9052_GPIO_MASK_LOWER_NIBBLE 0x0F +#define DA9052_GPIO_NIBBLE_SHIFT 4 +#define DA9052_IRQ_GPI0 16 +#define DA9052_GPIO_ODD_SHIFT 7 +#define DA9052_GPIO_EVEN_SHIFT 3 + +struct da9052_gpio { + struct da9052 *da9052; + struct gpio_chip gp; +}; + +static unsigned char da9052_gpio_port_odd(unsigned offset) +{ + return offset % 2; +} + +static int da9052_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct da9052_gpio *gpio = gpiochip_get_data(gc); + int da9052_port_direction = 0; + int ret; + + ret = da9052_reg_read(gpio->da9052, + DA9052_GPIO_0_1_REG + (offset >> 1)); + if (ret < 0) + return ret; + + if (da9052_gpio_port_odd(offset)) { + da9052_port_direction = ret & DA9052_GPIO_ODD_PORT_PIN; + da9052_port_direction >>= 4; + } else { + da9052_port_direction = ret & DA9052_GPIO_EVEN_PORT_PIN; + } + + switch (da9052_port_direction) { + case DA9052_INPUT: + if (offset < DA9052_GPIO_MAX_PORTS_PER_REGISTER) + ret = da9052_reg_read(gpio->da9052, + DA9052_STATUS_C_REG); + else + ret = da9052_reg_read(gpio->da9052, + DA9052_STATUS_D_REG); + if (ret < 0) + return ret; + return !!(ret & (1 << DA9052_GPIO_SHIFT_COUNT(offset))); + case DA9052_OUTPUT_PUSHPULL: + if (da9052_gpio_port_odd(offset)) + return !!(ret & DA9052_GPIO_ODD_PORT_MODE); + else + return !!(ret & DA9052_GPIO_EVEN_PORT_MODE); + default: + return -EINVAL; + } +} + +static void da9052_gpio_set(struct gpio_chip *gc, unsigned offset, int value) +{ + struct da9052_gpio *gpio = gpiochip_get_data(gc); + int ret; + + if (da9052_gpio_port_odd(offset)) { + ret = da9052_reg_update(gpio->da9052, (offset >> 1) + + DA9052_GPIO_0_1_REG, + DA9052_GPIO_ODD_PORT_MODE, + value << DA9052_GPIO_ODD_SHIFT); + if (ret != 0) + dev_err(gpio->da9052->dev, + "Failed to updated gpio odd reg,%d", + ret); + } else { + ret = da9052_reg_update(gpio->da9052, (offset >> 1) + + DA9052_GPIO_0_1_REG, + DA9052_GPIO_EVEN_PORT_MODE, + value << DA9052_GPIO_EVEN_SHIFT); + if (ret != 0) + dev_err(gpio->da9052->dev, + "Failed to updated gpio even reg,%d", + ret); + } +} + +static int da9052_gpio_direction_input(struct gpio_chip *gc, unsigned offset) +{ + struct da9052_gpio *gpio = gpiochip_get_data(gc); + unsigned char register_value; + int ret; + + /* Format: function - 2 bits type - 1 bit mode - 1 bit */ + register_value = DA9052_INPUT | DA9052_ACTIVE_LOW << 2 | + DA9052_DEBOUNCING_ON << 3; + + if (da9052_gpio_port_odd(offset)) + ret = da9052_reg_update(gpio->da9052, (offset >> 1) + + DA9052_GPIO_0_1_REG, + DA9052_GPIO_MASK_UPPER_NIBBLE, + (register_value << + DA9052_GPIO_NIBBLE_SHIFT)); + else + ret = da9052_reg_update(gpio->da9052, (offset >> 1) + + DA9052_GPIO_0_1_REG, + DA9052_GPIO_MASK_LOWER_NIBBLE, + register_value); + + return ret; +} + +static int da9052_gpio_direction_output(struct gpio_chip *gc, + unsigned offset, int value) +{ + struct da9052_gpio *gpio = gpiochip_get_data(gc); + unsigned char register_value; + int ret; + + /* Format: Function - 2 bits Type - 1 bit Mode - 1 bit */ + register_value = DA9052_OUTPUT_PUSHPULL | DA9052_SUPPLY_VDD_IO1 << 2 | + value << 3; + + if (da9052_gpio_port_odd(offset)) + ret = da9052_reg_update(gpio->da9052, (offset >> 1) + + DA9052_GPIO_0_1_REG, + DA9052_GPIO_MASK_UPPER_NIBBLE, + (register_value << + DA9052_GPIO_NIBBLE_SHIFT)); + else + ret = da9052_reg_update(gpio->da9052, (offset >> 1) + + DA9052_GPIO_0_1_REG, + DA9052_GPIO_MASK_LOWER_NIBBLE, + register_value); + + return ret; +} + +static int da9052_gpio_to_irq(struct gpio_chip *gc, u32 offset) +{ + struct da9052_gpio *gpio = gpiochip_get_data(gc); + struct da9052 *da9052 = gpio->da9052; + + int irq; + + irq = regmap_irq_get_virq(da9052->irq_data, DA9052_IRQ_GPI0 + offset); + + return irq; +} + +static const struct gpio_chip reference_gp = { + .label = "da9052-gpio", + .owner = THIS_MODULE, + .get = da9052_gpio_get, + .set = da9052_gpio_set, + .direction_input = da9052_gpio_direction_input, + .direction_output = da9052_gpio_direction_output, + .to_irq = da9052_gpio_to_irq, + .can_sleep = true, + .ngpio = 16, + .base = -1, +}; + +static int da9052_gpio_probe(struct platform_device *pdev) +{ + struct da9052_gpio *gpio; + struct da9052_pdata *pdata; + int ret; + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + gpio->da9052 = dev_get_drvdata(pdev->dev.parent); + pdata = dev_get_platdata(gpio->da9052->dev); + + gpio->gp = reference_gp; + if (pdata && pdata->gpio_base) + gpio->gp.base = pdata->gpio_base; + + ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, gpio); + + return 0; +} + +static struct platform_driver da9052_gpio_driver = { + .probe = da9052_gpio_probe, + .driver = { + .name = "da9052-gpio", + }, +}; + +module_platform_driver(da9052_gpio_driver); + +MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>"); +MODULE_DESCRIPTION("DA9052 GPIO Device Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9052-gpio"); diff --git a/drivers/gpio/gpio-da9055.c b/drivers/gpio/gpio-da9055.c new file mode 100644 index 000000000..2f1b5d23b --- /dev/null +++ b/drivers/gpio/gpio-da9055.c @@ -0,0 +1,187 @@ +/* + * GPIO Driver for Dialog DA9055 PMICs. + * + * Copyright(c) 2012 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen@diasemi.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio/driver.h> + +#include <linux/mfd/da9055/core.h> +#include <linux/mfd/da9055/reg.h> +#include <linux/mfd/da9055/pdata.h> + +#define DA9055_VDD_IO 0x0 +#define DA9055_PUSH_PULL 0x3 +#define DA9055_ACT_LOW 0x0 +#define DA9055_GPI 0x1 +#define DA9055_PORT_MASK 0x3 +#define DA9055_PORT_SHIFT(offset) (4 * (offset % 2)) + +#define DA9055_INPUT DA9055_GPI +#define DA9055_OUTPUT DA9055_PUSH_PULL +#define DA9055_IRQ_GPI0 3 + +struct da9055_gpio { + struct da9055 *da9055; + struct gpio_chip gp; +}; + +static int da9055_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct da9055_gpio *gpio = gpiochip_get_data(gc); + int gpio_direction = 0; + int ret; + + /* Get GPIO direction */ + ret = da9055_reg_read(gpio->da9055, (offset >> 1) + DA9055_REG_GPIO0_1); + if (ret < 0) + return ret; + + gpio_direction = ret & (DA9055_PORT_MASK) << DA9055_PORT_SHIFT(offset); + gpio_direction >>= DA9055_PORT_SHIFT(offset); + switch (gpio_direction) { + case DA9055_INPUT: + ret = da9055_reg_read(gpio->da9055, DA9055_REG_STATUS_B); + if (ret < 0) + return ret; + break; + case DA9055_OUTPUT: + ret = da9055_reg_read(gpio->da9055, DA9055_REG_GPIO_MODE0_2); + if (ret < 0) + return ret; + } + + return ret & (1 << offset); + +} + +static void da9055_gpio_set(struct gpio_chip *gc, unsigned offset, int value) +{ + struct da9055_gpio *gpio = gpiochip_get_data(gc); + + da9055_reg_update(gpio->da9055, + DA9055_REG_GPIO_MODE0_2, + 1 << offset, + value << offset); +} + +static int da9055_gpio_direction_input(struct gpio_chip *gc, unsigned offset) +{ + struct da9055_gpio *gpio = gpiochip_get_data(gc); + unsigned char reg_byte; + + reg_byte = (DA9055_ACT_LOW | DA9055_GPI) + << DA9055_PORT_SHIFT(offset); + + return da9055_reg_update(gpio->da9055, (offset >> 1) + + DA9055_REG_GPIO0_1, + DA9055_PORT_MASK << + DA9055_PORT_SHIFT(offset), + reg_byte); +} + +static int da9055_gpio_direction_output(struct gpio_chip *gc, + unsigned offset, int value) +{ + struct da9055_gpio *gpio = gpiochip_get_data(gc); + unsigned char reg_byte; + int ret; + + reg_byte = (DA9055_VDD_IO | DA9055_PUSH_PULL) + << DA9055_PORT_SHIFT(offset); + + ret = da9055_reg_update(gpio->da9055, (offset >> 1) + + DA9055_REG_GPIO0_1, + DA9055_PORT_MASK << + DA9055_PORT_SHIFT(offset), + reg_byte); + if (ret < 0) + return ret; + + da9055_gpio_set(gc, offset, value); + + return 0; +} + +static int da9055_gpio_to_irq(struct gpio_chip *gc, u32 offset) +{ + struct da9055_gpio *gpio = gpiochip_get_data(gc); + struct da9055 *da9055 = gpio->da9055; + + return regmap_irq_get_virq(da9055->irq_data, + DA9055_IRQ_GPI0 + offset); +} + +static const struct gpio_chip reference_gp = { + .label = "da9055-gpio", + .owner = THIS_MODULE, + .get = da9055_gpio_get, + .set = da9055_gpio_set, + .direction_input = da9055_gpio_direction_input, + .direction_output = da9055_gpio_direction_output, + .to_irq = da9055_gpio_to_irq, + .can_sleep = true, + .ngpio = 3, + .base = -1, +}; + +static int da9055_gpio_probe(struct platform_device *pdev) +{ + struct da9055_gpio *gpio; + struct da9055_pdata *pdata; + int ret; + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + gpio->da9055 = dev_get_drvdata(pdev->dev.parent); + pdata = dev_get_platdata(gpio->da9055->dev); + + gpio->gp = reference_gp; + if (pdata && pdata->gpio_base) + gpio->gp.base = pdata->gpio_base; + + ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, gpio); + + return 0; +} + +static struct platform_driver da9055_gpio_driver = { + .probe = da9055_gpio_probe, + .driver = { + .name = "da9055-gpio", + }, +}; + +static int __init da9055_gpio_init(void) +{ + return platform_driver_register(&da9055_gpio_driver); +} +subsys_initcall(da9055_gpio_init); + +static void __exit da9055_gpio_exit(void) +{ + platform_driver_unregister(&da9055_gpio_driver); +} +module_exit(da9055_gpio_exit); + +MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>"); +MODULE_DESCRIPTION("DA9055 GPIO Device Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9055-gpio"); diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c new file mode 100644 index 000000000..abb332d15 --- /dev/null +++ b/drivers/gpio/gpio-davinci.c @@ -0,0 +1,651 @@ +/* + * TI DaVinci GPIO Support + * + * Copyright (c) 2006-2007 David Brownell + * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/gpio/driver.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/irqchip/chained_irq.h> + +struct davinci_gpio_regs { + u32 dir; + u32 out_data; + u32 set_data; + u32 clr_data; + u32 in_data; + u32 set_rising; + u32 clr_rising; + u32 set_falling; + u32 clr_falling; + u32 intstat; +}; + +typedef struct irq_chip *(*gpio_get_irq_chip_cb_t)(unsigned int irq); + +#define BINTEN 0x8 /* GPIO Interrupt Per-Bank Enable Register */ +#define MAX_LABEL_SIZE 20 + +static void __iomem *gpio_base; +static unsigned int offset_array[5] = {0x10, 0x38, 0x60, 0x88, 0xb0}; + +static inline struct davinci_gpio_regs __iomem *irq2regs(struct irq_data *d) +{ + struct davinci_gpio_regs __iomem *g; + + g = (__force struct davinci_gpio_regs __iomem *)irq_data_get_irq_chip_data(d); + + return g; +} + +static int davinci_gpio_irq_setup(struct platform_device *pdev); + +/*--------------------------------------------------------------------------*/ + +/* board setup code *MUST* setup pinmux and enable the GPIO clock. */ +static inline int __davinci_direction(struct gpio_chip *chip, + unsigned offset, bool out, int value) +{ + struct davinci_gpio_controller *d = gpiochip_get_data(chip); + struct davinci_gpio_regs __iomem *g; + unsigned long flags; + u32 temp; + int bank = offset / 32; + u32 mask = __gpio_mask(offset); + + g = d->regs[bank]; + spin_lock_irqsave(&d->lock, flags); + temp = readl_relaxed(&g->dir); + if (out) { + temp &= ~mask; + writel_relaxed(mask, value ? &g->set_data : &g->clr_data); + } else { + temp |= mask; + } + writel_relaxed(temp, &g->dir); + spin_unlock_irqrestore(&d->lock, flags); + + return 0; +} + +static int davinci_direction_in(struct gpio_chip *chip, unsigned offset) +{ + return __davinci_direction(chip, offset, false, 0); +} + +static int +davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value) +{ + return __davinci_direction(chip, offset, true, value); +} + +/* + * Read the pin's value (works even if it's set up as output); + * returns zero/nonzero. + * + * Note that changes are synched to the GPIO clock, so reading values back + * right after you've set them may give old values. + */ +static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct davinci_gpio_controller *d = gpiochip_get_data(chip); + struct davinci_gpio_regs __iomem *g; + int bank = offset / 32; + + g = d->regs[bank]; + + return !!(__gpio_mask(offset) & readl_relaxed(&g->in_data)); +} + +/* + * Assuming the pin is muxed as a gpio output, set its output value. + */ +static void +davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct davinci_gpio_controller *d = gpiochip_get_data(chip); + struct davinci_gpio_regs __iomem *g; + int bank = offset / 32; + + g = d->regs[bank]; + + writel_relaxed(__gpio_mask(offset), + value ? &g->set_data : &g->clr_data); +} + +static struct davinci_gpio_platform_data * +davinci_gpio_get_pdata(struct platform_device *pdev) +{ + struct device_node *dn = pdev->dev.of_node; + struct davinci_gpio_platform_data *pdata; + int ret; + u32 val; + + if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) + return dev_get_platdata(&pdev->dev); + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + ret = of_property_read_u32(dn, "ti,ngpio", &val); + if (ret) + goto of_err; + + pdata->ngpio = val; + + ret = of_property_read_u32(dn, "ti,davinci-gpio-unbanked", &val); + if (ret) + goto of_err; + + pdata->gpio_unbanked = val; + + return pdata; + +of_err: + dev_err(&pdev->dev, "Populating pdata from DT failed: err %d\n", ret); + return NULL; +} + +static int davinci_gpio_probe(struct platform_device *pdev) +{ + static int ctrl_num, bank_base; + int gpio, bank, i, ret = 0; + unsigned int ngpio, nbank, nirq; + struct davinci_gpio_controller *chips; + struct davinci_gpio_platform_data *pdata; + struct device *dev = &pdev->dev; + struct resource *res; + char label[MAX_LABEL_SIZE]; + + pdata = davinci_gpio_get_pdata(pdev); + if (!pdata) { + dev_err(dev, "No platform data found\n"); + return -EINVAL; + } + + dev->platform_data = pdata; + + /* + * The gpio banks conceptually expose a segmented bitmap, + * and "ngpio" is one more than the largest zero-based + * bit index that's valid. + */ + ngpio = pdata->ngpio; + if (ngpio == 0) { + dev_err(dev, "How many GPIOs?\n"); + return -EINVAL; + } + + if (WARN_ON(ARCH_NR_GPIOS < ngpio)) + ngpio = ARCH_NR_GPIOS; + + /* + * If there are unbanked interrupts then the number of + * interrupts is equal to number of gpios else all are banked so + * number of interrupts is equal to number of banks(each with 16 gpios) + */ + if (pdata->gpio_unbanked) + nirq = pdata->gpio_unbanked; + else + nirq = DIV_ROUND_UP(ngpio, 16); + + nbank = DIV_ROUND_UP(ngpio, 32); + chips = devm_kcalloc(dev, + nbank, sizeof(struct davinci_gpio_controller), + GFP_KERNEL); + if (!chips) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gpio_base = devm_ioremap_resource(dev, res); + if (IS_ERR(gpio_base)) + return PTR_ERR(gpio_base); + + for (i = 0; i < nirq; i++) { + chips->irqs[i] = platform_get_irq(pdev, i); + if (chips->irqs[i] < 0) { + if (chips->irqs[i] != -EPROBE_DEFER) + dev_info(dev, "IRQ not populated, err = %d\n", + chips->irqs[i]); + return chips->irqs[i]; + } + } + + snprintf(label, MAX_LABEL_SIZE, "davinci_gpio.%d", ctrl_num++); + chips->chip.label = devm_kstrdup(dev, label, GFP_KERNEL); + if (!chips->chip.label) + return -ENOMEM; + + chips->chip.direction_input = davinci_direction_in; + chips->chip.get = davinci_gpio_get; + chips->chip.direction_output = davinci_direction_out; + chips->chip.set = davinci_gpio_set; + + chips->chip.ngpio = ngpio; + chips->chip.base = bank_base; + +#ifdef CONFIG_OF_GPIO + chips->chip.of_gpio_n_cells = 2; + chips->chip.parent = dev; + chips->chip.of_node = dev->of_node; + + if (of_property_read_bool(dev->of_node, "gpio-ranges")) { + chips->chip.request = gpiochip_generic_request; + chips->chip.free = gpiochip_generic_free; + } +#endif + spin_lock_init(&chips->lock); + bank_base += ngpio; + + for (gpio = 0, bank = 0; gpio < ngpio; gpio += 32, bank++) + chips->regs[bank] = gpio_base + offset_array[bank]; + + ret = devm_gpiochip_add_data(dev, &chips->chip, chips); + if (ret) + goto err; + + platform_set_drvdata(pdev, chips); + ret = davinci_gpio_irq_setup(pdev); + if (ret) + goto err; + + return 0; + +err: + /* Revert the static variable increments */ + ctrl_num--; + bank_base -= ngpio; + + return ret; +} + +/*--------------------------------------------------------------------------*/ +/* + * We expect irqs will normally be set up as input pins, but they can also be + * used as output pins ... which is convenient for testing. + * + * NOTE: The first few GPIOs also have direct INTC hookups in addition + * to their GPIOBNK0 irq, with a bit less overhead. + * + * All those INTC hookups (direct, plus several IRQ banks) can also + * serve as EDMA event triggers. + */ + +static void gpio_irq_disable(struct irq_data *d) +{ + struct davinci_gpio_regs __iomem *g = irq2regs(d); + u32 mask = (u32) irq_data_get_irq_handler_data(d); + + writel_relaxed(mask, &g->clr_falling); + writel_relaxed(mask, &g->clr_rising); +} + +static void gpio_irq_enable(struct irq_data *d) +{ + struct davinci_gpio_regs __iomem *g = irq2regs(d); + u32 mask = (u32) irq_data_get_irq_handler_data(d); + unsigned status = irqd_get_trigger_type(d); + + status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; + if (!status) + status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; + + if (status & IRQ_TYPE_EDGE_FALLING) + writel_relaxed(mask, &g->set_falling); + if (status & IRQ_TYPE_EDGE_RISING) + writel_relaxed(mask, &g->set_rising); +} + +static int gpio_irq_type(struct irq_data *d, unsigned trigger) +{ + if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + return -EINVAL; + + return 0; +} + +static struct irq_chip gpio_irqchip = { + .name = "GPIO", + .irq_enable = gpio_irq_enable, + .irq_disable = gpio_irq_disable, + .irq_set_type = gpio_irq_type, + .flags = IRQCHIP_SET_TYPE_MASKED, +}; + +static void gpio_irq_handler(struct irq_desc *desc) +{ + struct davinci_gpio_regs __iomem *g; + u32 mask = 0xffff; + int bank_num; + struct davinci_gpio_controller *d; + struct davinci_gpio_irq_data *irqdata; + + irqdata = (struct davinci_gpio_irq_data *)irq_desc_get_handler_data(desc); + bank_num = irqdata->bank_num; + g = irqdata->regs; + d = irqdata->chip; + + /* we only care about one bank */ + if ((bank_num % 2) == 1) + mask <<= 16; + + /* temporarily mask (level sensitive) parent IRQ */ + chained_irq_enter(irq_desc_get_chip(desc), desc); + while (1) { + u32 status; + int bit; + irq_hw_number_t hw_irq; + + /* ack any irqs */ + status = readl_relaxed(&g->intstat) & mask; + if (!status) + break; + writel_relaxed(status, &g->intstat); + + /* now demux them to the right lowlevel handler */ + + while (status) { + bit = __ffs(status); + status &= ~BIT(bit); + /* Max number of gpios per controller is 144 so + * hw_irq will be in [0..143] + */ + hw_irq = (bank_num / 2) * 32 + bit; + + generic_handle_irq( + irq_find_mapping(d->irq_domain, hw_irq)); + } + } + chained_irq_exit(irq_desc_get_chip(desc), desc); + /* now it may re-trigger */ +} + +static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset) +{ + struct davinci_gpio_controller *d = gpiochip_get_data(chip); + + if (d->irq_domain) + return irq_create_mapping(d->irq_domain, offset); + else + return -ENXIO; +} + +static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset) +{ + struct davinci_gpio_controller *d = gpiochip_get_data(chip); + + /* + * NOTE: we assume for now that only irqs in the first gpio_chip + * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs). + */ + if (offset < d->gpio_unbanked) + return d->irqs[offset]; + else + return -ENODEV; +} + +static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger) +{ + struct davinci_gpio_controller *d; + struct davinci_gpio_regs __iomem *g; + u32 mask, i; + + d = (struct davinci_gpio_controller *)irq_data_get_irq_handler_data(data); + g = (struct davinci_gpio_regs __iomem *)d->regs[0]; + for (i = 0; i < MAX_INT_PER_BANK; i++) + if (data->irq == d->irqs[i]) + break; + + if (i == MAX_INT_PER_BANK) + return -EINVAL; + + mask = __gpio_mask(i); + + if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + return -EINVAL; + + writel_relaxed(mask, (trigger & IRQ_TYPE_EDGE_FALLING) + ? &g->set_falling : &g->clr_falling); + writel_relaxed(mask, (trigger & IRQ_TYPE_EDGE_RISING) + ? &g->set_rising : &g->clr_rising); + + return 0; +} + +static int +davinci_gpio_irq_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + struct davinci_gpio_controller *chips = + (struct davinci_gpio_controller *)d->host_data; + struct davinci_gpio_regs __iomem *g = chips->regs[hw / 32]; + + irq_set_chip_and_handler_name(irq, &gpio_irqchip, handle_simple_irq, + "davinci_gpio"); + irq_set_irq_type(irq, IRQ_TYPE_NONE); + irq_set_chip_data(irq, (__force void *)g); + irq_set_handler_data(irq, (void *)__gpio_mask(hw)); + + return 0; +} + +static const struct irq_domain_ops davinci_gpio_irq_ops = { + .map = davinci_gpio_irq_map, + .xlate = irq_domain_xlate_onetwocell, +}; + +static struct irq_chip *davinci_gpio_get_irq_chip(unsigned int irq) +{ + static struct irq_chip_type gpio_unbanked; + + gpio_unbanked = *irq_data_get_chip_type(irq_get_irq_data(irq)); + + return &gpio_unbanked.chip; +}; + +static struct irq_chip *keystone_gpio_get_irq_chip(unsigned int irq) +{ + static struct irq_chip gpio_unbanked; + + gpio_unbanked = *irq_get_chip(irq); + return &gpio_unbanked; +}; + +static const struct of_device_id davinci_gpio_ids[]; + +/* + * NOTE: for suspend/resume, probably best to make a platform_device with + * suspend_late/resume_resume calls hooking into results of the set_wake() + * calls ... so if no gpios are wakeup events the clock can be disabled, + * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 + * (dm6446) can be set appropriately for GPIOV33 pins. + */ + +static int davinci_gpio_irq_setup(struct platform_device *pdev) +{ + unsigned gpio, bank; + int irq; + int ret; + struct clk *clk; + u32 binten = 0; + unsigned ngpio; + struct device *dev = &pdev->dev; + struct davinci_gpio_controller *chips = platform_get_drvdata(pdev); + struct davinci_gpio_platform_data *pdata = dev->platform_data; + struct davinci_gpio_regs __iomem *g; + struct irq_domain *irq_domain = NULL; + const struct of_device_id *match; + struct irq_chip *irq_chip; + struct davinci_gpio_irq_data *irqdata; + gpio_get_irq_chip_cb_t gpio_get_irq_chip; + + /* + * Use davinci_gpio_get_irq_chip by default to handle non DT cases + */ + gpio_get_irq_chip = davinci_gpio_get_irq_chip; + match = of_match_device(of_match_ptr(davinci_gpio_ids), + dev); + if (match) + gpio_get_irq_chip = (gpio_get_irq_chip_cb_t)match->data; + + ngpio = pdata->ngpio; + + clk = devm_clk_get(dev, "gpio"); + if (IS_ERR(clk)) { + dev_err(dev, "Error %ld getting gpio clock\n", PTR_ERR(clk)); + return PTR_ERR(clk); + } + + ret = clk_prepare_enable(clk); + if (ret) + return ret; + + if (!pdata->gpio_unbanked) { + irq = devm_irq_alloc_descs(dev, -1, 0, ngpio, 0); + if (irq < 0) { + dev_err(dev, "Couldn't allocate IRQ numbers\n"); + clk_disable_unprepare(clk); + return irq; + } + + irq_domain = irq_domain_add_legacy(dev->of_node, ngpio, irq, 0, + &davinci_gpio_irq_ops, + chips); + if (!irq_domain) { + dev_err(dev, "Couldn't register an IRQ domain\n"); + clk_disable_unprepare(clk); + return -ENODEV; + } + } + + /* + * Arrange gpio_to_irq() support, handling either direct IRQs or + * banked IRQs. Having GPIOs in the first GPIO bank use direct + * IRQs, while the others use banked IRQs, would need some setup + * tweaks to recognize hardware which can do that. + */ + chips->chip.to_irq = gpio_to_irq_banked; + chips->irq_domain = irq_domain; + + /* + * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO + * controller only handling trigger modes. We currently assume no + * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs. + */ + if (pdata->gpio_unbanked) { + /* pass "bank 0" GPIO IRQs to AINTC */ + chips->chip.to_irq = gpio_to_irq_unbanked; + chips->gpio_unbanked = pdata->gpio_unbanked; + binten = GENMASK(pdata->gpio_unbanked / 16, 0); + + /* AINTC handles mask/unmask; GPIO handles triggering */ + irq = chips->irqs[0]; + irq_chip = gpio_get_irq_chip(irq); + irq_chip->name = "GPIO-AINTC"; + irq_chip->irq_set_type = gpio_irq_type_unbanked; + + /* default trigger: both edges */ + g = chips->regs[0]; + writel_relaxed(~0, &g->set_falling); + writel_relaxed(~0, &g->set_rising); + + /* set the direct IRQs up to use that irqchip */ + for (gpio = 0; gpio < pdata->gpio_unbanked; gpio++) { + irq_set_chip(chips->irqs[gpio], irq_chip); + irq_set_handler_data(chips->irqs[gpio], chips); + irq_set_status_flags(chips->irqs[gpio], + IRQ_TYPE_EDGE_BOTH); + } + + goto done; + } + + /* + * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we + * then chain through our own handler. + */ + for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 16) { + /* disabled by default, enabled only as needed + * There are register sets for 32 GPIOs. 2 banks of 16 + * GPIOs are covered by each set of registers hence divide by 2 + */ + g = chips->regs[bank / 2]; + writel_relaxed(~0, &g->clr_falling); + writel_relaxed(~0, &g->clr_rising); + + /* + * Each chip handles 32 gpios, and each irq bank consists of 16 + * gpio irqs. Pass the irq bank's corresponding controller to + * the chained irq handler. + */ + irqdata = devm_kzalloc(&pdev->dev, + sizeof(struct + davinci_gpio_irq_data), + GFP_KERNEL); + if (!irqdata) { + clk_disable_unprepare(clk); + return -ENOMEM; + } + + irqdata->regs = g; + irqdata->bank_num = bank; + irqdata->chip = chips; + + irq_set_chained_handler_and_data(chips->irqs[bank], + gpio_irq_handler, irqdata); + + binten |= BIT(bank); + } + +done: + /* + * BINTEN -- per-bank interrupt enable. genirq would also let these + * bits be set/cleared dynamically. + */ + writel_relaxed(binten, gpio_base + BINTEN); + + return 0; +} + +static const struct of_device_id davinci_gpio_ids[] = { + { .compatible = "ti,keystone-gpio", keystone_gpio_get_irq_chip}, + { .compatible = "ti,dm6441-gpio", davinci_gpio_get_irq_chip}, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, davinci_gpio_ids); + +static struct platform_driver davinci_gpio_driver = { + .probe = davinci_gpio_probe, + .driver = { + .name = "davinci_gpio", + .of_match_table = of_match_ptr(davinci_gpio_ids), + }, +}; + +/** + * GPIO driver registration needs to be done before machine_init functions + * access GPIO. Hence davinci_gpio_drv_reg() is a postcore_initcall. + */ +static int __init davinci_gpio_drv_reg(void) +{ + return platform_driver_register(&davinci_gpio_driver); +} +postcore_initcall(davinci_gpio_drv_reg); diff --git a/drivers/gpio/gpio-dln2.c b/drivers/gpio/gpio-dln2.c new file mode 100644 index 000000000..c4e7953c0 --- /dev/null +++ b/drivers/gpio/gpio-dln2.c @@ -0,0 +1,525 @@ +/* + * Driver for the Diolan DLN-2 USB-GPIO adapter + * + * Copyright (c) 2014 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/irqdomain.h> +#include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/gpio/driver.h> +#include <linux/platform_device.h> +#include <linux/mfd/dln2.h> + +#define DLN2_GPIO_ID 0x01 + +#define DLN2_GPIO_GET_PIN_COUNT DLN2_CMD(0x01, DLN2_GPIO_ID) +#define DLN2_GPIO_SET_DEBOUNCE DLN2_CMD(0x04, DLN2_GPIO_ID) +#define DLN2_GPIO_GET_DEBOUNCE DLN2_CMD(0x05, DLN2_GPIO_ID) +#define DLN2_GPIO_PORT_GET_VAL DLN2_CMD(0x06, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_GET_VAL DLN2_CMD(0x0B, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_SET_OUT_VAL DLN2_CMD(0x0C, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_GET_OUT_VAL DLN2_CMD(0x0D, DLN2_GPIO_ID) +#define DLN2_GPIO_CONDITION_MET_EV DLN2_CMD(0x0F, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_ENABLE DLN2_CMD(0x10, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_DISABLE DLN2_CMD(0x11, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_SET_DIRECTION DLN2_CMD(0x13, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_GET_DIRECTION DLN2_CMD(0x14, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_SET_EVENT_CFG DLN2_CMD(0x1E, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_GET_EVENT_CFG DLN2_CMD(0x1F, DLN2_GPIO_ID) + +#define DLN2_GPIO_EVENT_NONE 0 +#define DLN2_GPIO_EVENT_CHANGE 1 +#define DLN2_GPIO_EVENT_LVL_HIGH 2 +#define DLN2_GPIO_EVENT_LVL_LOW 3 +#define DLN2_GPIO_EVENT_CHANGE_RISING 0x11 +#define DLN2_GPIO_EVENT_CHANGE_FALLING 0x21 +#define DLN2_GPIO_EVENT_MASK 0x0F + +#define DLN2_GPIO_MAX_PINS 32 + +struct dln2_gpio { + struct platform_device *pdev; + struct gpio_chip gpio; + + /* + * Cache pin direction to save us one transfer, since the hardware has + * separate commands to read the in and out values. + */ + DECLARE_BITMAP(output_enabled, DLN2_GPIO_MAX_PINS); + + /* active IRQs - not synced to hardware */ + DECLARE_BITMAP(unmasked_irqs, DLN2_GPIO_MAX_PINS); + /* active IRQS - synced to hardware */ + DECLARE_BITMAP(enabled_irqs, DLN2_GPIO_MAX_PINS); + int irq_type[DLN2_GPIO_MAX_PINS]; + struct mutex irq_lock; +}; + +struct dln2_gpio_pin { + __le16 pin; +}; + +struct dln2_gpio_pin_val { + __le16 pin __packed; + u8 value; +}; + +static int dln2_gpio_get_pin_count(struct platform_device *pdev) +{ + int ret; + __le16 count; + int len = sizeof(count); + + ret = dln2_transfer_rx(pdev, DLN2_GPIO_GET_PIN_COUNT, &count, &len); + if (ret < 0) + return ret; + if (len < sizeof(count)) + return -EPROTO; + + return le16_to_cpu(count); +} + +static int dln2_gpio_pin_cmd(struct dln2_gpio *dln2, int cmd, unsigned pin) +{ + struct dln2_gpio_pin req = { + .pin = cpu_to_le16(pin), + }; + + return dln2_transfer_tx(dln2->pdev, cmd, &req, sizeof(req)); +} + +static int dln2_gpio_pin_val(struct dln2_gpio *dln2, int cmd, unsigned int pin) +{ + int ret; + struct dln2_gpio_pin req = { + .pin = cpu_to_le16(pin), + }; + struct dln2_gpio_pin_val rsp; + int len = sizeof(rsp); + + ret = dln2_transfer(dln2->pdev, cmd, &req, sizeof(req), &rsp, &len); + if (ret < 0) + return ret; + if (len < sizeof(rsp) || req.pin != rsp.pin) + return -EPROTO; + + return rsp.value; +} + +static int dln2_gpio_pin_get_in_val(struct dln2_gpio *dln2, unsigned int pin) +{ + int ret; + + ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_VAL, pin); + if (ret < 0) + return ret; + return !!ret; +} + +static int dln2_gpio_pin_get_out_val(struct dln2_gpio *dln2, unsigned int pin) +{ + int ret; + + ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_OUT_VAL, pin); + if (ret < 0) + return ret; + return !!ret; +} + +static int dln2_gpio_pin_set_out_val(struct dln2_gpio *dln2, + unsigned int pin, int value) +{ + struct dln2_gpio_pin_val req = { + .pin = cpu_to_le16(pin), + .value = value, + }; + + return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_OUT_VAL, &req, + sizeof(req)); +} + +#define DLN2_GPIO_DIRECTION_IN 0 +#define DLN2_GPIO_DIRECTION_OUT 1 + +static int dln2_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct dln2_gpio *dln2 = gpiochip_get_data(chip); + struct dln2_gpio_pin req = { + .pin = cpu_to_le16(offset), + }; + struct dln2_gpio_pin_val rsp; + int len = sizeof(rsp); + int ret; + + ret = dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_ENABLE, offset); + if (ret < 0) + return ret; + + /* cache the pin direction */ + ret = dln2_transfer(dln2->pdev, DLN2_GPIO_PIN_GET_DIRECTION, + &req, sizeof(req), &rsp, &len); + if (ret < 0) + return ret; + if (len < sizeof(rsp) || req.pin != rsp.pin) { + ret = -EPROTO; + goto out_disable; + } + + switch (rsp.value) { + case DLN2_GPIO_DIRECTION_IN: + clear_bit(offset, dln2->output_enabled); + return 0; + case DLN2_GPIO_DIRECTION_OUT: + set_bit(offset, dln2->output_enabled); + return 0; + default: + ret = -EPROTO; + goto out_disable; + } + +out_disable: + dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset); + return ret; +} + +static void dln2_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct dln2_gpio *dln2 = gpiochip_get_data(chip); + + dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset); +} + +static int dln2_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct dln2_gpio *dln2 = gpiochip_get_data(chip); + + if (test_bit(offset, dln2->output_enabled)) + return 0; + + return 1; +} + +static int dln2_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct dln2_gpio *dln2 = gpiochip_get_data(chip); + int dir; + + dir = dln2_gpio_get_direction(chip, offset); + if (dir < 0) + return dir; + + if (dir == 1) + return dln2_gpio_pin_get_in_val(dln2, offset); + + return dln2_gpio_pin_get_out_val(dln2, offset); +} + +static void dln2_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct dln2_gpio *dln2 = gpiochip_get_data(chip); + + dln2_gpio_pin_set_out_val(dln2, offset, value); +} + +static int dln2_gpio_set_direction(struct gpio_chip *chip, unsigned offset, + unsigned dir) +{ + struct dln2_gpio *dln2 = gpiochip_get_data(chip); + struct dln2_gpio_pin_val req = { + .pin = cpu_to_le16(offset), + .value = dir, + }; + int ret; + + ret = dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_DIRECTION, + &req, sizeof(req)); + if (ret < 0) + return ret; + + if (dir == DLN2_GPIO_DIRECTION_OUT) + set_bit(offset, dln2->output_enabled); + else + clear_bit(offset, dln2->output_enabled); + + return ret; +} + +static int dln2_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_IN); +} + +static int dln2_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct dln2_gpio *dln2 = gpiochip_get_data(chip); + int ret; + + ret = dln2_gpio_pin_set_out_val(dln2, offset, value); + if (ret < 0) + return ret; + + return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_OUT); +} + +static int dln2_gpio_set_config(struct gpio_chip *chip, unsigned offset, + unsigned long config) +{ + struct dln2_gpio *dln2 = gpiochip_get_data(chip); + __le32 duration; + + if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) + return -ENOTSUPP; + + duration = cpu_to_le32(pinconf_to_config_argument(config)); + return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_SET_DEBOUNCE, + &duration, sizeof(duration)); +} + +static int dln2_gpio_set_event_cfg(struct dln2_gpio *dln2, unsigned pin, + unsigned type, unsigned period) +{ + struct { + __le16 pin; + u8 type; + __le16 period; + } __packed req = { + .pin = cpu_to_le16(pin), + .type = type, + .period = cpu_to_le16(period), + }; + + return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_EVENT_CFG, + &req, sizeof(req)); +} + +static void dln2_irq_unmask(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = gpiochip_get_data(gc); + int pin = irqd_to_hwirq(irqd); + + set_bit(pin, dln2->unmasked_irqs); +} + +static void dln2_irq_mask(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = gpiochip_get_data(gc); + int pin = irqd_to_hwirq(irqd); + + clear_bit(pin, dln2->unmasked_irqs); +} + +static int dln2_irq_set_type(struct irq_data *irqd, unsigned type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = gpiochip_get_data(gc); + int pin = irqd_to_hwirq(irqd); + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + dln2->irq_type[pin] = DLN2_GPIO_EVENT_LVL_HIGH; + break; + case IRQ_TYPE_LEVEL_LOW: + dln2->irq_type[pin] = DLN2_GPIO_EVENT_LVL_LOW; + break; + case IRQ_TYPE_EDGE_BOTH: + dln2->irq_type[pin] = DLN2_GPIO_EVENT_CHANGE; + break; + case IRQ_TYPE_EDGE_RISING: + dln2->irq_type[pin] = DLN2_GPIO_EVENT_CHANGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + dln2->irq_type[pin] = DLN2_GPIO_EVENT_CHANGE_FALLING; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void dln2_irq_bus_lock(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = gpiochip_get_data(gc); + + mutex_lock(&dln2->irq_lock); +} + +static void dln2_irq_bus_unlock(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = gpiochip_get_data(gc); + int pin = irqd_to_hwirq(irqd); + int enabled, unmasked; + unsigned type; + int ret; + + enabled = test_bit(pin, dln2->enabled_irqs); + unmasked = test_bit(pin, dln2->unmasked_irqs); + + if (enabled != unmasked) { + if (unmasked) { + type = dln2->irq_type[pin] & DLN2_GPIO_EVENT_MASK; + set_bit(pin, dln2->enabled_irqs); + } else { + type = DLN2_GPIO_EVENT_NONE; + clear_bit(pin, dln2->enabled_irqs); + } + + ret = dln2_gpio_set_event_cfg(dln2, pin, type, 0); + if (ret) + dev_err(dln2->gpio.parent, "failed to set event\n"); + } + + mutex_unlock(&dln2->irq_lock); +} + +static struct irq_chip dln2_gpio_irqchip = { + .name = "dln2-irq", + .irq_mask = dln2_irq_mask, + .irq_unmask = dln2_irq_unmask, + .irq_set_type = dln2_irq_set_type, + .irq_bus_lock = dln2_irq_bus_lock, + .irq_bus_sync_unlock = dln2_irq_bus_unlock, +}; + +static void dln2_gpio_event(struct platform_device *pdev, u16 echo, + const void *data, int len) +{ + int pin, irq; + + const struct { + __le16 count; + __u8 type; + __le16 pin; + __u8 value; + } __packed *event = data; + struct dln2_gpio *dln2 = platform_get_drvdata(pdev); + + if (len < sizeof(*event)) { + dev_err(dln2->gpio.parent, "short event message\n"); + return; + } + + pin = le16_to_cpu(event->pin); + if (pin >= dln2->gpio.ngpio) { + dev_err(dln2->gpio.parent, "out of bounds pin %d\n", pin); + return; + } + + irq = irq_find_mapping(dln2->gpio.irq.domain, pin); + if (!irq) { + dev_err(dln2->gpio.parent, "pin %d not mapped to IRQ\n", pin); + return; + } + + switch (dln2->irq_type[pin]) { + case DLN2_GPIO_EVENT_CHANGE_RISING: + if (event->value) + generic_handle_irq(irq); + break; + case DLN2_GPIO_EVENT_CHANGE_FALLING: + if (!event->value) + generic_handle_irq(irq); + break; + default: + generic_handle_irq(irq); + } +} + +static int dln2_gpio_probe(struct platform_device *pdev) +{ + struct dln2_gpio *dln2; + struct device *dev = &pdev->dev; + int pins; + int ret; + + pins = dln2_gpio_get_pin_count(pdev); + if (pins < 0) { + dev_err(dev, "failed to get pin count: %d\n", pins); + return pins; + } + if (pins > DLN2_GPIO_MAX_PINS) { + pins = DLN2_GPIO_MAX_PINS; + dev_warn(dev, "clamping pins to %d\n", DLN2_GPIO_MAX_PINS); + } + + dln2 = devm_kzalloc(&pdev->dev, sizeof(*dln2), GFP_KERNEL); + if (!dln2) + return -ENOMEM; + + mutex_init(&dln2->irq_lock); + + dln2->pdev = pdev; + + dln2->gpio.label = "dln2"; + dln2->gpio.parent = dev; + dln2->gpio.owner = THIS_MODULE; + dln2->gpio.base = -1; + dln2->gpio.ngpio = pins; + dln2->gpio.can_sleep = true; + dln2->gpio.set = dln2_gpio_set; + dln2->gpio.get = dln2_gpio_get; + dln2->gpio.request = dln2_gpio_request; + dln2->gpio.free = dln2_gpio_free; + dln2->gpio.get_direction = dln2_gpio_get_direction; + dln2->gpio.direction_input = dln2_gpio_direction_input; + dln2->gpio.direction_output = dln2_gpio_direction_output; + dln2->gpio.set_config = dln2_gpio_set_config; + + platform_set_drvdata(pdev, dln2); + + ret = devm_gpiochip_add_data(dev, &dln2->gpio, dln2); + if (ret < 0) { + dev_err(dev, "failed to add gpio chip: %d\n", ret); + return ret; + } + + ret = gpiochip_irqchip_add(&dln2->gpio, &dln2_gpio_irqchip, 0, + handle_simple_irq, IRQ_TYPE_NONE); + if (ret < 0) { + dev_err(dev, "failed to add irq chip: %d\n", ret); + return ret; + } + + ret = dln2_register_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV, + dln2_gpio_event); + if (ret) { + dev_err(dev, "failed to register event cb: %d\n", ret); + return ret; + } + + return 0; +} + +static int dln2_gpio_remove(struct platform_device *pdev) +{ + dln2_unregister_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV); + + return 0; +} + +static struct platform_driver dln2_gpio_driver = { + .driver.name = "dln2-gpio", + .probe = dln2_gpio_probe, + .remove = dln2_gpio_remove, +}; + +module_platform_driver(dln2_gpio_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com"); +MODULE_DESCRIPTION("Driver for the Diolan DLN2 GPIO interface"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:dln2-gpio"); diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c new file mode 100644 index 000000000..2a56efced --- /dev/null +++ b/drivers/gpio/gpio-dwapb.c @@ -0,0 +1,868 @@ +/* + * Copyright (c) 2011 Jamie Iles + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * All enquiries to support@picochip.com + */ +#include <linux/acpi.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/reset.h> +#include <linux/spinlock.h> +#include <linux/platform_data/gpio-dwapb.h> +#include <linux/slab.h> + +#include "gpiolib.h" + +#define GPIO_SWPORTA_DR 0x00 +#define GPIO_SWPORTA_DDR 0x04 +#define GPIO_SWPORTB_DR 0x0c +#define GPIO_SWPORTB_DDR 0x10 +#define GPIO_SWPORTC_DR 0x18 +#define GPIO_SWPORTC_DDR 0x1c +#define GPIO_SWPORTD_DR 0x24 +#define GPIO_SWPORTD_DDR 0x28 +#define GPIO_INTEN 0x30 +#define GPIO_INTMASK 0x34 +#define GPIO_INTTYPE_LEVEL 0x38 +#define GPIO_INT_POLARITY 0x3c +#define GPIO_INTSTATUS 0x40 +#define GPIO_PORTA_DEBOUNCE 0x48 +#define GPIO_PORTA_EOI 0x4c +#define GPIO_EXT_PORTA 0x50 +#define GPIO_EXT_PORTB 0x54 +#define GPIO_EXT_PORTC 0x58 +#define GPIO_EXT_PORTD 0x5c + +#define DWAPB_DRIVER_NAME "gpio-dwapb" +#define DWAPB_MAX_PORTS 4 + +#define GPIO_EXT_PORT_STRIDE 0x04 /* register stride 32 bits */ +#define GPIO_SWPORT_DR_STRIDE 0x0c /* register stride 3*32 bits */ +#define GPIO_SWPORT_DDR_STRIDE 0x0c /* register stride 3*32 bits */ + +#define GPIO_REG_OFFSET_V2 1 + +#define GPIO_INTMASK_V2 0x44 +#define GPIO_INTTYPE_LEVEL_V2 0x34 +#define GPIO_INT_POLARITY_V2 0x38 +#define GPIO_INTSTATUS_V2 0x3c +#define GPIO_PORTA_EOI_V2 0x40 + +struct dwapb_gpio; + +#ifdef CONFIG_PM_SLEEP +/* Store GPIO context across system-wide suspend/resume transitions */ +struct dwapb_context { + u32 data; + u32 dir; + u32 ext; + u32 int_en; + u32 int_mask; + u32 int_type; + u32 int_pol; + u32 int_deb; + u32 wake_en; +}; +#endif + +struct dwapb_gpio_port { + struct gpio_chip gc; + bool is_registered; + struct dwapb_gpio *gpio; +#ifdef CONFIG_PM_SLEEP + struct dwapb_context *ctx; +#endif + unsigned int idx; +}; + +struct dwapb_gpio { + struct device *dev; + void __iomem *regs; + struct dwapb_gpio_port *ports; + unsigned int nr_ports; + struct irq_domain *domain; + unsigned int flags; + struct reset_control *rst; + struct clk *clk; +}; + +static inline u32 gpio_reg_v2_convert(unsigned int offset) +{ + switch (offset) { + case GPIO_INTMASK: + return GPIO_INTMASK_V2; + case GPIO_INTTYPE_LEVEL: + return GPIO_INTTYPE_LEVEL_V2; + case GPIO_INT_POLARITY: + return GPIO_INT_POLARITY_V2; + case GPIO_INTSTATUS: + return GPIO_INTSTATUS_V2; + case GPIO_PORTA_EOI: + return GPIO_PORTA_EOI_V2; + } + + return offset; +} + +static inline u32 gpio_reg_convert(struct dwapb_gpio *gpio, unsigned int offset) +{ + if (gpio->flags & GPIO_REG_OFFSET_V2) + return gpio_reg_v2_convert(offset); + + return offset; +} + +static inline u32 dwapb_read(struct dwapb_gpio *gpio, unsigned int offset) +{ + struct gpio_chip *gc = &gpio->ports[0].gc; + void __iomem *reg_base = gpio->regs; + + return gc->read_reg(reg_base + gpio_reg_convert(gpio, offset)); +} + +static inline void dwapb_write(struct dwapb_gpio *gpio, unsigned int offset, + u32 val) +{ + struct gpio_chip *gc = &gpio->ports[0].gc; + void __iomem *reg_base = gpio->regs; + + gc->write_reg(reg_base + gpio_reg_convert(gpio, offset), val); +} + +static int dwapb_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct dwapb_gpio_port *port = gpiochip_get_data(gc); + struct dwapb_gpio *gpio = port->gpio; + + return irq_find_mapping(gpio->domain, offset); +} + +static struct dwapb_gpio_port *dwapb_offs_to_port(struct dwapb_gpio *gpio, unsigned int offs) +{ + struct dwapb_gpio_port *port; + int i; + + for (i = 0; i < gpio->nr_ports; i++) { + port = &gpio->ports[i]; + if (port->idx == offs / 32) + return port; + } + + return NULL; +} + +static void dwapb_toggle_trigger(struct dwapb_gpio *gpio, unsigned int offs) +{ + struct dwapb_gpio_port *port = dwapb_offs_to_port(gpio, offs); + struct gpio_chip *gc; + u32 pol; + int val; + + if (!port) + return; + gc = &port->gc; + + pol = dwapb_read(gpio, GPIO_INT_POLARITY); + /* Just read the current value right out of the data register */ + val = gc->get(gc, offs % 32); + if (val) + pol &= ~BIT(offs); + else + pol |= BIT(offs); + + dwapb_write(gpio, GPIO_INT_POLARITY, pol); +} + +static u32 dwapb_do_irq(struct dwapb_gpio *gpio) +{ + u32 irq_status = dwapb_read(gpio, GPIO_INTSTATUS); + u32 ret = irq_status; + + while (irq_status) { + int hwirq = fls(irq_status) - 1; + int gpio_irq = irq_find_mapping(gpio->domain, hwirq); + + generic_handle_irq(gpio_irq); + irq_status &= ~BIT(hwirq); + + if ((irq_get_trigger_type(gpio_irq) & IRQ_TYPE_SENSE_MASK) + == IRQ_TYPE_EDGE_BOTH) + dwapb_toggle_trigger(gpio, hwirq); + } + + return ret; +} + +static void dwapb_irq_handler(struct irq_desc *desc) +{ + struct dwapb_gpio *gpio = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + + dwapb_do_irq(gpio); + + if (chip->irq_eoi) + chip->irq_eoi(irq_desc_get_irq_data(desc)); +} + +static void dwapb_irq_enable(struct irq_data *d) +{ + struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d); + struct dwapb_gpio *gpio = igc->private; + struct gpio_chip *gc = &gpio->ports[0].gc; + unsigned long flags; + u32 val; + + spin_lock_irqsave(&gc->bgpio_lock, flags); + val = dwapb_read(gpio, GPIO_INTEN); + val |= BIT(d->hwirq); + dwapb_write(gpio, GPIO_INTEN, val); + spin_unlock_irqrestore(&gc->bgpio_lock, flags); +} + +static void dwapb_irq_disable(struct irq_data *d) +{ + struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d); + struct dwapb_gpio *gpio = igc->private; + struct gpio_chip *gc = &gpio->ports[0].gc; + unsigned long flags; + u32 val; + + spin_lock_irqsave(&gc->bgpio_lock, flags); + val = dwapb_read(gpio, GPIO_INTEN); + val &= ~BIT(d->hwirq); + dwapb_write(gpio, GPIO_INTEN, val); + spin_unlock_irqrestore(&gc->bgpio_lock, flags); +} + +static int dwapb_irq_reqres(struct irq_data *d) +{ + struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d); + struct dwapb_gpio *gpio = igc->private; + struct gpio_chip *gc = &gpio->ports[0].gc; + int ret; + + ret = gpiochip_lock_as_irq(gc, irqd_to_hwirq(d)); + if (ret) { + dev_err(gpio->dev, "unable to lock HW IRQ %lu for IRQ\n", + irqd_to_hwirq(d)); + return ret; + } + return 0; +} + +static void dwapb_irq_relres(struct irq_data *d) +{ + struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d); + struct dwapb_gpio *gpio = igc->private; + struct gpio_chip *gc = &gpio->ports[0].gc; + + gpiochip_unlock_as_irq(gc, irqd_to_hwirq(d)); +} + +static int dwapb_irq_set_type(struct irq_data *d, u32 type) +{ + struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d); + struct dwapb_gpio *gpio = igc->private; + struct gpio_chip *gc = &gpio->ports[0].gc; + int bit = d->hwirq; + unsigned long level, polarity, flags; + + if (type & ~(IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | + IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) + return -EINVAL; + + spin_lock_irqsave(&gc->bgpio_lock, flags); + level = dwapb_read(gpio, GPIO_INTTYPE_LEVEL); + polarity = dwapb_read(gpio, GPIO_INT_POLARITY); + + switch (type) { + case IRQ_TYPE_EDGE_BOTH: + level |= BIT(bit); + dwapb_toggle_trigger(gpio, bit); + break; + case IRQ_TYPE_EDGE_RISING: + level |= BIT(bit); + polarity |= BIT(bit); + break; + case IRQ_TYPE_EDGE_FALLING: + level |= BIT(bit); + polarity &= ~BIT(bit); + break; + case IRQ_TYPE_LEVEL_HIGH: + level &= ~BIT(bit); + polarity |= BIT(bit); + break; + case IRQ_TYPE_LEVEL_LOW: + level &= ~BIT(bit); + polarity &= ~BIT(bit); + break; + } + + irq_setup_alt_chip(d, type); + + dwapb_write(gpio, GPIO_INTTYPE_LEVEL, level); + if (type != IRQ_TYPE_EDGE_BOTH) + dwapb_write(gpio, GPIO_INT_POLARITY, polarity); + spin_unlock_irqrestore(&gc->bgpio_lock, flags); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int dwapb_irq_set_wake(struct irq_data *d, unsigned int enable) +{ + struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d); + struct dwapb_gpio *gpio = igc->private; + struct dwapb_context *ctx = gpio->ports[0].ctx; + + if (enable) + ctx->wake_en |= BIT(d->hwirq); + else + ctx->wake_en &= ~BIT(d->hwirq); + + return 0; +} +#endif + +static int dwapb_gpio_set_debounce(struct gpio_chip *gc, + unsigned offset, unsigned debounce) +{ + struct dwapb_gpio_port *port = gpiochip_get_data(gc); + struct dwapb_gpio *gpio = port->gpio; + unsigned long flags, val_deb; + unsigned long mask = BIT(offset); + + spin_lock_irqsave(&gc->bgpio_lock, flags); + + val_deb = dwapb_read(gpio, GPIO_PORTA_DEBOUNCE); + if (debounce) + dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, val_deb | mask); + else + dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, val_deb & ~mask); + + spin_unlock_irqrestore(&gc->bgpio_lock, flags); + + return 0; +} + +static int dwapb_gpio_set_config(struct gpio_chip *gc, unsigned offset, + unsigned long config) +{ + u32 debounce; + + if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) + return -ENOTSUPP; + + debounce = pinconf_to_config_argument(config); + return dwapb_gpio_set_debounce(gc, offset, debounce); +} + +static irqreturn_t dwapb_irq_handler_mfd(int irq, void *dev_id) +{ + u32 worked; + struct dwapb_gpio *gpio = dev_id; + + worked = dwapb_do_irq(gpio); + + return worked ? IRQ_HANDLED : IRQ_NONE; +} + +static void dwapb_configure_irqs(struct dwapb_gpio *gpio, + struct dwapb_gpio_port *port, + struct dwapb_port_property *pp) +{ + struct gpio_chip *gc = &port->gc; + struct fwnode_handle *fwnode = pp->fwnode; + struct irq_chip_generic *irq_gc = NULL; + unsigned int hwirq, ngpio = gc->ngpio; + struct irq_chip_type *ct; + int err, i; + + gpio->domain = irq_domain_create_linear(fwnode, ngpio, + &irq_generic_chip_ops, gpio); + if (!gpio->domain) + return; + + err = irq_alloc_domain_generic_chips(gpio->domain, ngpio, 2, + DWAPB_DRIVER_NAME, handle_level_irq, + IRQ_NOREQUEST, 0, + IRQ_GC_INIT_NESTED_LOCK); + if (err) { + dev_info(gpio->dev, "irq_alloc_domain_generic_chips failed\n"); + irq_domain_remove(gpio->domain); + gpio->domain = NULL; + return; + } + + irq_gc = irq_get_domain_generic_chip(gpio->domain, 0); + if (!irq_gc) { + irq_domain_remove(gpio->domain); + gpio->domain = NULL; + return; + } + + irq_gc->reg_base = gpio->regs; + irq_gc->private = gpio; + + for (i = 0; i < 2; i++) { + ct = &irq_gc->chip_types[i]; + ct->chip.irq_ack = irq_gc_ack_set_bit; + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; + ct->chip.irq_set_type = dwapb_irq_set_type; + ct->chip.irq_enable = dwapb_irq_enable; + ct->chip.irq_disable = dwapb_irq_disable; + ct->chip.irq_request_resources = dwapb_irq_reqres; + ct->chip.irq_release_resources = dwapb_irq_relres; +#ifdef CONFIG_PM_SLEEP + ct->chip.irq_set_wake = dwapb_irq_set_wake; +#endif + ct->regs.ack = gpio_reg_convert(gpio, GPIO_PORTA_EOI); + ct->regs.mask = gpio_reg_convert(gpio, GPIO_INTMASK); + ct->type = IRQ_TYPE_LEVEL_MASK; + } + + irq_gc->chip_types[0].type = IRQ_TYPE_LEVEL_MASK; + irq_gc->chip_types[1].type = IRQ_TYPE_EDGE_BOTH; + irq_gc->chip_types[1].handler = handle_edge_irq; + + if (!pp->irq_shared) { + int i; + + for (i = 0; i < pp->ngpio; i++) { + if (pp->irq[i] >= 0) + irq_set_chained_handler_and_data(pp->irq[i], + dwapb_irq_handler, gpio); + } + } else { + /* + * Request a shared IRQ since where MFD would have devices + * using the same irq pin + */ + err = devm_request_irq(gpio->dev, pp->irq[0], + dwapb_irq_handler_mfd, + IRQF_SHARED, DWAPB_DRIVER_NAME, gpio); + if (err) { + dev_err(gpio->dev, "error requesting IRQ\n"); + irq_domain_remove(gpio->domain); + gpio->domain = NULL; + return; + } + } + + for (hwirq = 0 ; hwirq < ngpio ; hwirq++) + irq_create_mapping(gpio->domain, hwirq); + + port->gc.to_irq = dwapb_gpio_to_irq; +} + +static void dwapb_irq_teardown(struct dwapb_gpio *gpio) +{ + struct dwapb_gpio_port *port = &gpio->ports[0]; + struct gpio_chip *gc = &port->gc; + unsigned int ngpio = gc->ngpio; + irq_hw_number_t hwirq; + + if (!gpio->domain) + return; + + for (hwirq = 0 ; hwirq < ngpio ; hwirq++) + irq_dispose_mapping(irq_find_mapping(gpio->domain, hwirq)); + + irq_domain_remove(gpio->domain); + gpio->domain = NULL; +} + +static int dwapb_gpio_add_port(struct dwapb_gpio *gpio, + struct dwapb_port_property *pp, + unsigned int offs) +{ + struct dwapb_gpio_port *port; + void __iomem *dat, *set, *dirout; + int err; + + port = &gpio->ports[offs]; + port->gpio = gpio; + port->idx = pp->idx; + +#ifdef CONFIG_PM_SLEEP + port->ctx = devm_kzalloc(gpio->dev, sizeof(*port->ctx), GFP_KERNEL); + if (!port->ctx) + return -ENOMEM; +#endif + + dat = gpio->regs + GPIO_EXT_PORTA + (pp->idx * GPIO_EXT_PORT_STRIDE); + set = gpio->regs + GPIO_SWPORTA_DR + (pp->idx * GPIO_SWPORT_DR_STRIDE); + dirout = gpio->regs + GPIO_SWPORTA_DDR + + (pp->idx * GPIO_SWPORT_DDR_STRIDE); + + /* This registers 32 GPIO lines per port */ + err = bgpio_init(&port->gc, gpio->dev, 4, dat, set, NULL, dirout, + NULL, 0); + if (err) { + dev_err(gpio->dev, "failed to init gpio chip for port%d\n", + port->idx); + return err; + } + +#ifdef CONFIG_OF_GPIO + port->gc.of_node = to_of_node(pp->fwnode); +#endif + port->gc.ngpio = pp->ngpio; + port->gc.base = pp->gpio_base; + + /* Only port A support debounce */ + if (pp->idx == 0) + port->gc.set_config = dwapb_gpio_set_config; + + if (pp->has_irq) + dwapb_configure_irqs(gpio, port, pp); + + err = gpiochip_add_data(&port->gc, port); + if (err) { + dev_err(gpio->dev, "failed to register gpiochip for port%d\n", + port->idx); + return err; + } + + /* Add GPIO-signaled ACPI event support */ + acpi_gpiochip_request_interrupts(&port->gc); + + port->is_registered = true; + + return 0; +} + +static void dwapb_gpio_unregister(struct dwapb_gpio *gpio) +{ + unsigned int m; + + for (m = 0; m < gpio->nr_ports; ++m) { + struct dwapb_gpio_port *port = &gpio->ports[m]; + + if (!port->is_registered) + continue; + + acpi_gpiochip_free_interrupts(&port->gc); + gpiochip_remove(&port->gc); + } +} + +static struct dwapb_platform_data * +dwapb_gpio_get_pdata(struct device *dev) +{ + struct fwnode_handle *fwnode; + struct dwapb_platform_data *pdata; + struct dwapb_port_property *pp; + int nports; + int i, j; + + nports = device_get_child_node_count(dev); + if (nports == 0) + return ERR_PTR(-ENODEV); + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + pdata->properties = devm_kcalloc(dev, nports, sizeof(*pp), GFP_KERNEL); + if (!pdata->properties) + return ERR_PTR(-ENOMEM); + + pdata->nports = nports; + + i = 0; + device_for_each_child_node(dev, fwnode) { + struct device_node *np = NULL; + + pp = &pdata->properties[i++]; + pp->fwnode = fwnode; + + if (fwnode_property_read_u32(fwnode, "reg", &pp->idx) || + pp->idx >= DWAPB_MAX_PORTS) { + dev_err(dev, + "missing/invalid port index for port%d\n", i); + fwnode_handle_put(fwnode); + return ERR_PTR(-EINVAL); + } + + if (fwnode_property_read_u32(fwnode, "snps,nr-gpios", + &pp->ngpio)) { + dev_info(dev, + "failed to get number of gpios for port%d\n", + i); + pp->ngpio = 32; + } + + pp->irq_shared = false; + pp->gpio_base = -1; + + /* + * Only port A can provide interrupts in all configurations of + * the IP. + */ + if (pp->idx != 0) + continue; + + if (dev->of_node && fwnode_property_read_bool(fwnode, + "interrupt-controller")) { + np = to_of_node(fwnode); + } + + for (j = 0; j < pp->ngpio; j++) { + pp->irq[j] = -ENXIO; + + if (np) + pp->irq[j] = of_irq_get(np, j); + else if (has_acpi_companion(dev)) + pp->irq[j] = platform_get_irq(to_platform_device(dev), j); + + if (pp->irq[j] >= 0) + pp->has_irq = true; + } + + if (!pp->has_irq) + dev_warn(dev, "no irq for port%d\n", pp->idx); + } + + return pdata; +} + +static const struct of_device_id dwapb_of_match[] = { + { .compatible = "snps,dw-apb-gpio", .data = (void *)0}, + { .compatible = "apm,xgene-gpio-v2", .data = (void *)GPIO_REG_OFFSET_V2}, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, dwapb_of_match); + +static const struct acpi_device_id dwapb_acpi_match[] = { + {"HISI0181", 0}, + {"APMC0D07", 0}, + {"APMC0D81", GPIO_REG_OFFSET_V2}, + { } +}; +MODULE_DEVICE_TABLE(acpi, dwapb_acpi_match); + +static int dwapb_gpio_probe(struct platform_device *pdev) +{ + unsigned int i; + struct resource *res; + struct dwapb_gpio *gpio; + int err; + struct device *dev = &pdev->dev; + struct dwapb_platform_data *pdata = dev_get_platdata(dev); + + if (!pdata) { + pdata = dwapb_gpio_get_pdata(dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } + + if (!pdata->nports) + return -ENODEV; + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + gpio->dev = &pdev->dev; + gpio->nr_ports = pdata->nports; + + gpio->rst = devm_reset_control_get_optional_shared(dev, NULL); + if (IS_ERR(gpio->rst)) + return PTR_ERR(gpio->rst); + + reset_control_deassert(gpio->rst); + + gpio->ports = devm_kcalloc(&pdev->dev, gpio->nr_ports, + sizeof(*gpio->ports), GFP_KERNEL); + if (!gpio->ports) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gpio->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(gpio->regs)) + return PTR_ERR(gpio->regs); + + /* Optional bus clock */ + gpio->clk = devm_clk_get(&pdev->dev, "bus"); + if (!IS_ERR(gpio->clk)) { + err = clk_prepare_enable(gpio->clk); + if (err) { + dev_info(&pdev->dev, "Cannot enable clock\n"); + return err; + } + } + + gpio->flags = 0; + if (dev->of_node) { + gpio->flags = (uintptr_t)of_device_get_match_data(dev); + } else if (has_acpi_companion(dev)) { + const struct acpi_device_id *acpi_id; + + acpi_id = acpi_match_device(dwapb_acpi_match, dev); + if (acpi_id) { + if (acpi_id->driver_data) + gpio->flags = acpi_id->driver_data; + } + } + + for (i = 0; i < gpio->nr_ports; i++) { + err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i); + if (err) + goto out_unregister; + } + platform_set_drvdata(pdev, gpio); + + return 0; + +out_unregister: + dwapb_gpio_unregister(gpio); + dwapb_irq_teardown(gpio); + clk_disable_unprepare(gpio->clk); + + return err; +} + +static int dwapb_gpio_remove(struct platform_device *pdev) +{ + struct dwapb_gpio *gpio = platform_get_drvdata(pdev); + + dwapb_gpio_unregister(gpio); + dwapb_irq_teardown(gpio); + reset_control_assert(gpio->rst); + clk_disable_unprepare(gpio->clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int dwapb_gpio_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct dwapb_gpio *gpio = platform_get_drvdata(pdev); + struct gpio_chip *gc = &gpio->ports[0].gc; + unsigned long flags; + int i; + + spin_lock_irqsave(&gc->bgpio_lock, flags); + for (i = 0; i < gpio->nr_ports; i++) { + unsigned int offset; + unsigned int idx = gpio->ports[i].idx; + struct dwapb_context *ctx = gpio->ports[i].ctx; + + BUG_ON(!ctx); + + offset = GPIO_SWPORTA_DDR + idx * GPIO_SWPORT_DDR_STRIDE; + ctx->dir = dwapb_read(gpio, offset); + + offset = GPIO_SWPORTA_DR + idx * GPIO_SWPORT_DR_STRIDE; + ctx->data = dwapb_read(gpio, offset); + + offset = GPIO_EXT_PORTA + idx * GPIO_EXT_PORT_STRIDE; + ctx->ext = dwapb_read(gpio, offset); + + /* Only port A can provide interrupts */ + if (idx == 0) { + ctx->int_mask = dwapb_read(gpio, GPIO_INTMASK); + ctx->int_en = dwapb_read(gpio, GPIO_INTEN); + ctx->int_pol = dwapb_read(gpio, GPIO_INT_POLARITY); + ctx->int_type = dwapb_read(gpio, GPIO_INTTYPE_LEVEL); + ctx->int_deb = dwapb_read(gpio, GPIO_PORTA_DEBOUNCE); + + /* Mask out interrupts */ + dwapb_write(gpio, GPIO_INTMASK, + 0xffffffff & ~ctx->wake_en); + } + } + spin_unlock_irqrestore(&gc->bgpio_lock, flags); + + clk_disable_unprepare(gpio->clk); + + return 0; +} + +static int dwapb_gpio_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct dwapb_gpio *gpio = platform_get_drvdata(pdev); + struct gpio_chip *gc = &gpio->ports[0].gc; + unsigned long flags; + int i; + + if (!IS_ERR(gpio->clk)) + clk_prepare_enable(gpio->clk); + + spin_lock_irqsave(&gc->bgpio_lock, flags); + for (i = 0; i < gpio->nr_ports; i++) { + unsigned int offset; + unsigned int idx = gpio->ports[i].idx; + struct dwapb_context *ctx = gpio->ports[i].ctx; + + BUG_ON(!ctx); + + offset = GPIO_SWPORTA_DR + idx * GPIO_SWPORT_DR_STRIDE; + dwapb_write(gpio, offset, ctx->data); + + offset = GPIO_SWPORTA_DDR + idx * GPIO_SWPORT_DDR_STRIDE; + dwapb_write(gpio, offset, ctx->dir); + + offset = GPIO_EXT_PORTA + idx * GPIO_EXT_PORT_STRIDE; + dwapb_write(gpio, offset, ctx->ext); + + /* Only port A can provide interrupts */ + if (idx == 0) { + dwapb_write(gpio, GPIO_INTTYPE_LEVEL, ctx->int_type); + dwapb_write(gpio, GPIO_INT_POLARITY, ctx->int_pol); + dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, ctx->int_deb); + dwapb_write(gpio, GPIO_INTEN, ctx->int_en); + dwapb_write(gpio, GPIO_INTMASK, ctx->int_mask); + + /* Clear out spurious interrupts */ + dwapb_write(gpio, GPIO_PORTA_EOI, 0xffffffff); + } + } + spin_unlock_irqrestore(&gc->bgpio_lock, flags); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(dwapb_gpio_pm_ops, dwapb_gpio_suspend, + dwapb_gpio_resume); + +static struct platform_driver dwapb_gpio_driver = { + .driver = { + .name = DWAPB_DRIVER_NAME, + .pm = &dwapb_gpio_pm_ops, + .of_match_table = of_match_ptr(dwapb_of_match), + .acpi_match_table = ACPI_PTR(dwapb_acpi_match), + }, + .probe = dwapb_gpio_probe, + .remove = dwapb_gpio_remove, +}; + +module_platform_driver(dwapb_gpio_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jamie Iles"); +MODULE_DESCRIPTION("Synopsys DesignWare APB GPIO driver"); +MODULE_ALIAS("platform:" DWAPB_DRIVER_NAME); diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c new file mode 100644 index 000000000..4f1af323e --- /dev/null +++ b/drivers/gpio/gpio-eic-sprd.c @@ -0,0 +1,693 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Spreadtrum Communications Inc. + * Copyright (C) 2018 Linaro Ltd. + */ + +#include <linux/bitops.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> + +/* EIC registers definition */ +#define SPRD_EIC_DBNC_DATA 0x0 +#define SPRD_EIC_DBNC_DMSK 0x4 +#define SPRD_EIC_DBNC_IEV 0x14 +#define SPRD_EIC_DBNC_IE 0x18 +#define SPRD_EIC_DBNC_RIS 0x1c +#define SPRD_EIC_DBNC_MIS 0x20 +#define SPRD_EIC_DBNC_IC 0x24 +#define SPRD_EIC_DBNC_TRIG 0x28 +#define SPRD_EIC_DBNC_CTRL0 0x40 + +#define SPRD_EIC_LATCH_INTEN 0x0 +#define SPRD_EIC_LATCH_INTRAW 0x4 +#define SPRD_EIC_LATCH_INTMSK 0x8 +#define SPRD_EIC_LATCH_INTCLR 0xc +#define SPRD_EIC_LATCH_INTPOL 0x10 +#define SPRD_EIC_LATCH_INTMODE 0x14 + +#define SPRD_EIC_ASYNC_INTIE 0x0 +#define SPRD_EIC_ASYNC_INTRAW 0x4 +#define SPRD_EIC_ASYNC_INTMSK 0x8 +#define SPRD_EIC_ASYNC_INTCLR 0xc +#define SPRD_EIC_ASYNC_INTMODE 0x10 +#define SPRD_EIC_ASYNC_INTBOTH 0x14 +#define SPRD_EIC_ASYNC_INTPOL 0x18 +#define SPRD_EIC_ASYNC_DATA 0x1c + +#define SPRD_EIC_SYNC_INTIE 0x0 +#define SPRD_EIC_SYNC_INTRAW 0x4 +#define SPRD_EIC_SYNC_INTMSK 0x8 +#define SPRD_EIC_SYNC_INTCLR 0xc +#define SPRD_EIC_SYNC_INTMODE 0x10 +#define SPRD_EIC_SYNC_INTBOTH 0x14 +#define SPRD_EIC_SYNC_INTPOL 0x18 +#define SPRD_EIC_SYNC_DATA 0x1c + +/* + * The digital-chip EIC controller can support maximum 3 banks, and each bank + * contains 8 EICs. + */ +#define SPRD_EIC_MAX_BANK 3 +#define SPRD_EIC_PER_BANK_NR 8 +#define SPRD_EIC_DATA_MASK GENMASK(7, 0) +#define SPRD_EIC_BIT(x) ((x) & (SPRD_EIC_PER_BANK_NR - 1)) +#define SPRD_EIC_DBNC_MASK GENMASK(11, 0) + +/* + * The Spreadtrum EIC (external interrupt controller) can be used only in + * input mode to generate interrupts if detecting input signals. + * + * The Spreadtrum digital-chip EIC controller contains 4 sub-modules: + * debounce EIC, latch EIC, async EIC and sync EIC, + * + * The debounce EIC is used to capture the input signals' stable status + * (millisecond resolution) and a single-trigger mechanism is introduced + * into this sub-module to enhance the input event detection reliability. + * The debounce range is from 1ms to 4s with a step size of 1ms. + * + * The latch EIC is used to latch some special power down signals and + * generate interrupts, since the latch EIC does not depend on the APB clock + * to capture signals. + * + * The async EIC uses a 32k clock to capture the short signals (microsecond + * resolution) to generate interrupts by level or edge trigger. + * + * The EIC-sync is similar with GPIO's input function, which is a synchronized + * signal input register. + */ +enum sprd_eic_type { + SPRD_EIC_DEBOUNCE, + SPRD_EIC_LATCH, + SPRD_EIC_ASYNC, + SPRD_EIC_SYNC, + SPRD_EIC_MAX, +}; + +struct sprd_eic { + struct gpio_chip chip; + struct irq_chip intc; + void __iomem *base[SPRD_EIC_MAX_BANK]; + enum sprd_eic_type type; + spinlock_t lock; + int irq; +}; + +struct sprd_eic_variant_data { + enum sprd_eic_type type; + u32 num_eics; +}; + +static const char *sprd_eic_label_name[SPRD_EIC_MAX] = { + "eic-debounce", "eic-latch", "eic-async", + "eic-sync", +}; + +static const struct sprd_eic_variant_data sc9860_eic_dbnc_data = { + .type = SPRD_EIC_DEBOUNCE, + .num_eics = 8, +}; + +static const struct sprd_eic_variant_data sc9860_eic_latch_data = { + .type = SPRD_EIC_LATCH, + .num_eics = 8, +}; + +static const struct sprd_eic_variant_data sc9860_eic_async_data = { + .type = SPRD_EIC_ASYNC, + .num_eics = 8, +}; + +static const struct sprd_eic_variant_data sc9860_eic_sync_data = { + .type = SPRD_EIC_SYNC, + .num_eics = 8, +}; + +static inline void __iomem *sprd_eic_offset_base(struct sprd_eic *sprd_eic, + unsigned int bank) +{ + if (bank >= SPRD_EIC_MAX_BANK) + return NULL; + + return sprd_eic->base[bank]; +} + +static void sprd_eic_update(struct gpio_chip *chip, unsigned int offset, + u16 reg, unsigned int val) +{ + struct sprd_eic *sprd_eic = gpiochip_get_data(chip); + void __iomem *base = + sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR); + unsigned long flags; + u32 tmp; + + spin_lock_irqsave(&sprd_eic->lock, flags); + tmp = readl_relaxed(base + reg); + + if (val) + tmp |= BIT(SPRD_EIC_BIT(offset)); + else + tmp &= ~BIT(SPRD_EIC_BIT(offset)); + + writel_relaxed(tmp, base + reg); + spin_unlock_irqrestore(&sprd_eic->lock, flags); +} + +static int sprd_eic_read(struct gpio_chip *chip, unsigned int offset, u16 reg) +{ + struct sprd_eic *sprd_eic = gpiochip_get_data(chip); + void __iomem *base = + sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR); + + return !!(readl_relaxed(base + reg) & BIT(SPRD_EIC_BIT(offset))); +} + +static int sprd_eic_request(struct gpio_chip *chip, unsigned int offset) +{ + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 1); + return 0; +} + +static void sprd_eic_free(struct gpio_chip *chip, unsigned int offset) +{ + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 0); +} + +static int sprd_eic_get(struct gpio_chip *chip, unsigned int offset) +{ + struct sprd_eic *sprd_eic = gpiochip_get_data(chip); + + switch (sprd_eic->type) { + case SPRD_EIC_DEBOUNCE: + return sprd_eic_read(chip, offset, SPRD_EIC_DBNC_DATA); + case SPRD_EIC_ASYNC: + return sprd_eic_read(chip, offset, SPRD_EIC_ASYNC_DATA); + case SPRD_EIC_SYNC: + return sprd_eic_read(chip, offset, SPRD_EIC_SYNC_DATA); + default: + return -ENOTSUPP; + } +} + +static int sprd_eic_direction_input(struct gpio_chip *chip, unsigned int offset) +{ + /* EICs are always input, nothing need to do here. */ + return 0; +} + +static void sprd_eic_set(struct gpio_chip *chip, unsigned int offset, int value) +{ + /* EICs are always input, nothing need to do here. */ +} + +static int sprd_eic_set_debounce(struct gpio_chip *chip, unsigned int offset, + unsigned int debounce) +{ + struct sprd_eic *sprd_eic = gpiochip_get_data(chip); + void __iomem *base = + sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR); + u32 reg = SPRD_EIC_DBNC_CTRL0 + SPRD_EIC_BIT(offset) * 0x4; + u32 value = readl_relaxed(base + reg) & ~SPRD_EIC_DBNC_MASK; + + value |= (debounce / 1000) & SPRD_EIC_DBNC_MASK; + writel_relaxed(value, base + reg); + + return 0; +} + +static int sprd_eic_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + unsigned long param = pinconf_to_config_param(config); + u32 arg = pinconf_to_config_argument(config); + + if (param == PIN_CONFIG_INPUT_DEBOUNCE) + return sprd_eic_set_debounce(chip, offset, arg); + + return -ENOTSUPP; +} + +static void sprd_eic_irq_mask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct sprd_eic *sprd_eic = gpiochip_get_data(chip); + u32 offset = irqd_to_hwirq(data); + + switch (sprd_eic->type) { + case SPRD_EIC_DEBOUNCE: + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 0); + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 0); + break; + case SPRD_EIC_LATCH: + sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 0); + break; + case SPRD_EIC_ASYNC: + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 0); + break; + case SPRD_EIC_SYNC: + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 0); + break; + default: + dev_err(chip->parent, "Unsupported EIC type.\n"); + } +} + +static void sprd_eic_irq_unmask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct sprd_eic *sprd_eic = gpiochip_get_data(chip); + u32 offset = irqd_to_hwirq(data); + + switch (sprd_eic->type) { + case SPRD_EIC_DEBOUNCE: + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 1); + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 1); + break; + case SPRD_EIC_LATCH: + sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 1); + break; + case SPRD_EIC_ASYNC: + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 1); + break; + case SPRD_EIC_SYNC: + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 1); + break; + default: + dev_err(chip->parent, "Unsupported EIC type.\n"); + } +} + +static void sprd_eic_irq_ack(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct sprd_eic *sprd_eic = gpiochip_get_data(chip); + u32 offset = irqd_to_hwirq(data); + + switch (sprd_eic->type) { + case SPRD_EIC_DEBOUNCE: + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1); + break; + case SPRD_EIC_LATCH: + sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1); + break; + case SPRD_EIC_ASYNC: + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1); + break; + case SPRD_EIC_SYNC: + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1); + break; + default: + dev_err(chip->parent, "Unsupported EIC type.\n"); + } +} + +static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct sprd_eic *sprd_eic = gpiochip_get_data(chip); + u32 offset = irqd_to_hwirq(data); + int state; + + switch (sprd_eic->type) { + case SPRD_EIC_DEBOUNCE: + switch (flow_type) { + case IRQ_TYPE_LEVEL_HIGH: + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1); + break; + case IRQ_TYPE_LEVEL_LOW: + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0); + break; + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_BOTH: + state = sprd_eic_get(chip, offset); + if (state) + sprd_eic_update(chip, offset, + SPRD_EIC_DBNC_IEV, 0); + else + sprd_eic_update(chip, offset, + SPRD_EIC_DBNC_IEV, 1); + break; + default: + return -ENOTSUPP; + } + + irq_set_handler_locked(data, handle_level_irq); + break; + case SPRD_EIC_LATCH: + switch (flow_type) { + case IRQ_TYPE_LEVEL_HIGH: + sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0); + break; + case IRQ_TYPE_LEVEL_LOW: + sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1); + break; + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_BOTH: + state = sprd_eic_get(chip, offset); + if (state) + sprd_eic_update(chip, offset, + SPRD_EIC_LATCH_INTPOL, 0); + else + sprd_eic_update(chip, offset, + SPRD_EIC_LATCH_INTPOL, 1); + break; + default: + return -ENOTSUPP; + } + + irq_set_handler_locked(data, handle_level_irq); + break; + case SPRD_EIC_ASYNC: + switch (flow_type) { + case IRQ_TYPE_EDGE_RISING: + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0); + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1); + irq_set_handler_locked(data, handle_edge_irq); + break; + case IRQ_TYPE_EDGE_FALLING: + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0); + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0); + irq_set_handler_locked(data, handle_edge_irq); + break; + case IRQ_TYPE_EDGE_BOTH: + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0); + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1); + irq_set_handler_locked(data, handle_edge_irq); + break; + case IRQ_TYPE_LEVEL_HIGH: + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1); + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1); + irq_set_handler_locked(data, handle_level_irq); + break; + case IRQ_TYPE_LEVEL_LOW: + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1); + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0); + irq_set_handler_locked(data, handle_level_irq); + break; + default: + return -ENOTSUPP; + } + break; + case SPRD_EIC_SYNC: + switch (flow_type) { + case IRQ_TYPE_EDGE_RISING: + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0); + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1); + irq_set_handler_locked(data, handle_edge_irq); + break; + case IRQ_TYPE_EDGE_FALLING: + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0); + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0); + irq_set_handler_locked(data, handle_edge_irq); + break; + case IRQ_TYPE_EDGE_BOTH: + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0); + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1); + irq_set_handler_locked(data, handle_edge_irq); + break; + case IRQ_TYPE_LEVEL_HIGH: + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1); + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1); + irq_set_handler_locked(data, handle_level_irq); + break; + case IRQ_TYPE_LEVEL_LOW: + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1); + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0); + irq_set_handler_locked(data, handle_level_irq); + break; + default: + return -ENOTSUPP; + } + default: + dev_err(chip->parent, "Unsupported EIC type.\n"); + return -ENOTSUPP; + } + + return 0; +} + +static void sprd_eic_toggle_trigger(struct gpio_chip *chip, unsigned int irq, + unsigned int offset) +{ + struct sprd_eic *sprd_eic = gpiochip_get_data(chip); + struct irq_data *data = irq_get_irq_data(irq); + u32 trigger = irqd_get_trigger_type(data); + int state, post_state; + + /* + * The debounce EIC and latch EIC can only support level trigger, so we + * can toggle the level trigger to emulate the edge trigger. + */ + if ((sprd_eic->type != SPRD_EIC_DEBOUNCE && + sprd_eic->type != SPRD_EIC_LATCH) || + !(trigger & IRQ_TYPE_EDGE_BOTH)) + return; + + sprd_eic_irq_mask(data); + state = sprd_eic_get(chip, offset); + +retry: + switch (sprd_eic->type) { + case SPRD_EIC_DEBOUNCE: + if (state) + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0); + else + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1); + break; + case SPRD_EIC_LATCH: + if (state) + sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0); + else + sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1); + break; + default: + sprd_eic_irq_unmask(data); + return; + } + + post_state = sprd_eic_get(chip, offset); + if (state != post_state) { + dev_warn(chip->parent, "EIC level was changed.\n"); + state = post_state; + goto retry; + } + + sprd_eic_irq_unmask(data); +} + +static int sprd_eic_match_chip_by_type(struct gpio_chip *chip, void *data) +{ + enum sprd_eic_type type = *(enum sprd_eic_type *)data; + + return !strcmp(chip->label, sprd_eic_label_name[type]); +} + +static void sprd_eic_handle_one_type(struct gpio_chip *chip) +{ + struct sprd_eic *sprd_eic = gpiochip_get_data(chip); + u32 bank, n, girq; + + for (bank = 0; bank * SPRD_EIC_PER_BANK_NR < chip->ngpio; bank++) { + void __iomem *base = sprd_eic_offset_base(sprd_eic, bank); + unsigned long reg; + + switch (sprd_eic->type) { + case SPRD_EIC_DEBOUNCE: + reg = readl_relaxed(base + SPRD_EIC_DBNC_MIS) & + SPRD_EIC_DATA_MASK; + break; + case SPRD_EIC_LATCH: + reg = readl_relaxed(base + SPRD_EIC_LATCH_INTMSK) & + SPRD_EIC_DATA_MASK; + break; + case SPRD_EIC_ASYNC: + reg = readl_relaxed(base + SPRD_EIC_ASYNC_INTMSK) & + SPRD_EIC_DATA_MASK; + break; + case SPRD_EIC_SYNC: + reg = readl_relaxed(base + SPRD_EIC_SYNC_INTMSK) & + SPRD_EIC_DATA_MASK; + break; + default: + dev_err(chip->parent, "Unsupported EIC type.\n"); + return; + } + + for_each_set_bit(n, ®, SPRD_EIC_PER_BANK_NR) { + u32 offset = bank * SPRD_EIC_PER_BANK_NR + n; + + girq = irq_find_mapping(chip->irq.domain, offset); + + generic_handle_irq(girq); + sprd_eic_toggle_trigger(chip, girq, offset); + } + } +} + +static void sprd_eic_irq_handler(struct irq_desc *desc) +{ + struct irq_chip *ic = irq_desc_get_chip(desc); + struct gpio_chip *chip; + enum sprd_eic_type type; + + chained_irq_enter(ic, desc); + + /* + * Since the digital-chip EIC 4 sub-modules (debounce, latch, async + * and sync) share one same interrupt line, we should iterate each + * EIC module to check if there are EIC interrupts were triggered. + */ + for (type = SPRD_EIC_DEBOUNCE; type < SPRD_EIC_MAX; type++) { + chip = gpiochip_find(&type, sprd_eic_match_chip_by_type); + if (!chip) + continue; + + sprd_eic_handle_one_type(chip); + } + + chained_irq_exit(ic, desc); +} + +static int sprd_eic_probe(struct platform_device *pdev) +{ + const struct sprd_eic_variant_data *pdata; + struct gpio_irq_chip *irq; + struct sprd_eic *sprd_eic; + struct resource *res; + int ret, i; + + pdata = of_device_get_match_data(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "No matching driver data found.\n"); + return -EINVAL; + } + + sprd_eic = devm_kzalloc(&pdev->dev, sizeof(*sprd_eic), GFP_KERNEL); + if (!sprd_eic) + return -ENOMEM; + + spin_lock_init(&sprd_eic->lock); + sprd_eic->type = pdata->type; + + sprd_eic->irq = platform_get_irq(pdev, 0); + if (sprd_eic->irq < 0) { + dev_err(&pdev->dev, "Failed to get EIC interrupt.\n"); + return sprd_eic->irq; + } + + for (i = 0; i < SPRD_EIC_MAX_BANK; i++) { + /* + * We can have maximum 3 banks EICs, and each EIC has + * its own base address. But some platform maybe only + * have one bank EIC, thus base[1] and base[2] can be + * optional. + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + if (!res) + break; + + sprd_eic->base[i] = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(sprd_eic->base[i])) + return PTR_ERR(sprd_eic->base[i]); + } + + sprd_eic->chip.label = sprd_eic_label_name[sprd_eic->type]; + sprd_eic->chip.ngpio = pdata->num_eics; + sprd_eic->chip.base = -1; + sprd_eic->chip.parent = &pdev->dev; + sprd_eic->chip.of_node = pdev->dev.of_node; + sprd_eic->chip.direction_input = sprd_eic_direction_input; + switch (sprd_eic->type) { + case SPRD_EIC_DEBOUNCE: + sprd_eic->chip.request = sprd_eic_request; + sprd_eic->chip.free = sprd_eic_free; + sprd_eic->chip.set_config = sprd_eic_set_config; + sprd_eic->chip.set = sprd_eic_set; + /* fall-through */ + case SPRD_EIC_ASYNC: + /* fall-through */ + case SPRD_EIC_SYNC: + sprd_eic->chip.get = sprd_eic_get; + break; + case SPRD_EIC_LATCH: + /* fall-through */ + default: + break; + } + + sprd_eic->intc.name = dev_name(&pdev->dev); + sprd_eic->intc.irq_ack = sprd_eic_irq_ack; + sprd_eic->intc.irq_mask = sprd_eic_irq_mask; + sprd_eic->intc.irq_unmask = sprd_eic_irq_unmask; + sprd_eic->intc.irq_set_type = sprd_eic_irq_set_type; + sprd_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE; + + irq = &sprd_eic->chip.irq; + irq->chip = &sprd_eic->intc; + irq->handler = handle_bad_irq; + irq->default_type = IRQ_TYPE_NONE; + irq->parent_handler = sprd_eic_irq_handler; + irq->parent_handler_data = sprd_eic; + irq->num_parents = 1; + irq->parents = &sprd_eic->irq; + + ret = devm_gpiochip_add_data(&pdev->dev, &sprd_eic->chip, sprd_eic); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret); + return ret; + } + + platform_set_drvdata(pdev, sprd_eic); + return 0; +} + +static const struct of_device_id sprd_eic_of_match[] = { + { + .compatible = "sprd,sc9860-eic-debounce", + .data = &sc9860_eic_dbnc_data, + }, + { + .compatible = "sprd,sc9860-eic-latch", + .data = &sc9860_eic_latch_data, + }, + { + .compatible = "sprd,sc9860-eic-async", + .data = &sc9860_eic_async_data, + }, + { + .compatible = "sprd,sc9860-eic-sync", + .data = &sc9860_eic_sync_data, + }, + { + /* end of list */ + } +}; +MODULE_DEVICE_TABLE(of, sprd_eic_of_match); + +static struct platform_driver sprd_eic_driver = { + .probe = sprd_eic_probe, + .driver = { + .name = "sprd-eic", + .of_match_table = sprd_eic_of_match, + }, +}; + +module_platform_driver(sprd_eic_driver); + +MODULE_DESCRIPTION("Spreadtrum EIC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c new file mode 100644 index 000000000..982e699a5 --- /dev/null +++ b/drivers/gpio/gpio-em.c @@ -0,0 +1,426 @@ +/* + * Emma Mobile GPIO Support - GIO + * + * Copyright (C) 2012 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/pinctrl/consumer.h> + +struct em_gio_priv { + void __iomem *base0; + void __iomem *base1; + spinlock_t sense_lock; + struct platform_device *pdev; + struct gpio_chip gpio_chip; + struct irq_chip irq_chip; + struct irq_domain *irq_domain; +}; + +#define GIO_E1 0x00 +#define GIO_E0 0x04 +#define GIO_EM 0x04 +#define GIO_OL 0x08 +#define GIO_OH 0x0c +#define GIO_I 0x10 +#define GIO_IIA 0x14 +#define GIO_IEN 0x18 +#define GIO_IDS 0x1c +#define GIO_IIM 0x1c +#define GIO_RAW 0x20 +#define GIO_MST 0x24 +#define GIO_IIR 0x28 + +#define GIO_IDT0 0x40 +#define GIO_IDT1 0x44 +#define GIO_IDT2 0x48 +#define GIO_IDT3 0x4c +#define GIO_RAWBL 0x50 +#define GIO_RAWBH 0x54 +#define GIO_IRBL 0x58 +#define GIO_IRBH 0x5c + +#define GIO_IDT(n) (GIO_IDT0 + ((n) * 4)) + +static inline unsigned long em_gio_read(struct em_gio_priv *p, int offs) +{ + if (offs < GIO_IDT0) + return ioread32(p->base0 + offs); + else + return ioread32(p->base1 + (offs - GIO_IDT0)); +} + +static inline void em_gio_write(struct em_gio_priv *p, int offs, + unsigned long value) +{ + if (offs < GIO_IDT0) + iowrite32(value, p->base0 + offs); + else + iowrite32(value, p->base1 + (offs - GIO_IDT0)); +} + +static void em_gio_irq_disable(struct irq_data *d) +{ + struct em_gio_priv *p = irq_data_get_irq_chip_data(d); + + em_gio_write(p, GIO_IDS, BIT(irqd_to_hwirq(d))); +} + +static void em_gio_irq_enable(struct irq_data *d) +{ + struct em_gio_priv *p = irq_data_get_irq_chip_data(d); + + em_gio_write(p, GIO_IEN, BIT(irqd_to_hwirq(d))); +} + +static int em_gio_irq_reqres(struct irq_data *d) +{ + struct em_gio_priv *p = irq_data_get_irq_chip_data(d); + int ret; + + ret = gpiochip_lock_as_irq(&p->gpio_chip, irqd_to_hwirq(d)); + if (ret) { + dev_err(p->gpio_chip.parent, + "unable to lock HW IRQ %lu for IRQ\n", + irqd_to_hwirq(d)); + return ret; + } + return 0; +} + +static void em_gio_irq_relres(struct irq_data *d) +{ + struct em_gio_priv *p = irq_data_get_irq_chip_data(d); + + gpiochip_unlock_as_irq(&p->gpio_chip, irqd_to_hwirq(d)); +} + + +#define GIO_ASYNC(x) (x + 8) + +static unsigned char em_gio_sense_table[IRQ_TYPE_SENSE_MASK + 1] = { + [IRQ_TYPE_EDGE_RISING] = GIO_ASYNC(0x00), + [IRQ_TYPE_EDGE_FALLING] = GIO_ASYNC(0x01), + [IRQ_TYPE_LEVEL_HIGH] = GIO_ASYNC(0x02), + [IRQ_TYPE_LEVEL_LOW] = GIO_ASYNC(0x03), + [IRQ_TYPE_EDGE_BOTH] = GIO_ASYNC(0x04), +}; + +static int em_gio_irq_set_type(struct irq_data *d, unsigned int type) +{ + unsigned char value = em_gio_sense_table[type & IRQ_TYPE_SENSE_MASK]; + struct em_gio_priv *p = irq_data_get_irq_chip_data(d); + unsigned int reg, offset, shift; + unsigned long flags; + unsigned long tmp; + + if (!value) + return -EINVAL; + + offset = irqd_to_hwirq(d); + + pr_debug("gio: sense irq = %d, mode = %d\n", offset, value); + + /* 8 x 4 bit fields in 4 IDT registers */ + reg = GIO_IDT(offset >> 3); + shift = (offset & 0x07) << 4; + + spin_lock_irqsave(&p->sense_lock, flags); + + /* disable the interrupt in IIA */ + tmp = em_gio_read(p, GIO_IIA); + tmp &= ~BIT(offset); + em_gio_write(p, GIO_IIA, tmp); + + /* change the sense setting in IDT */ + tmp = em_gio_read(p, reg); + tmp &= ~(0xf << shift); + tmp |= value << shift; + em_gio_write(p, reg, tmp); + + /* clear pending interrupts */ + em_gio_write(p, GIO_IIR, BIT(offset)); + + /* enable the interrupt in IIA */ + tmp = em_gio_read(p, GIO_IIA); + tmp |= BIT(offset); + em_gio_write(p, GIO_IIA, tmp); + + spin_unlock_irqrestore(&p->sense_lock, flags); + + return 0; +} + +static irqreturn_t em_gio_irq_handler(int irq, void *dev_id) +{ + struct em_gio_priv *p = dev_id; + unsigned long pending; + unsigned int offset, irqs_handled = 0; + + while ((pending = em_gio_read(p, GIO_MST))) { + offset = __ffs(pending); + em_gio_write(p, GIO_IIR, BIT(offset)); + generic_handle_irq(irq_find_mapping(p->irq_domain, offset)); + irqs_handled++; + } + + return irqs_handled ? IRQ_HANDLED : IRQ_NONE; +} + +static inline struct em_gio_priv *gpio_to_priv(struct gpio_chip *chip) +{ + return gpiochip_get_data(chip); +} + +static int em_gio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + em_gio_write(gpio_to_priv(chip), GIO_E0, BIT(offset)); + return 0; +} + +static int em_gio_get(struct gpio_chip *chip, unsigned offset) +{ + return !!(em_gio_read(gpio_to_priv(chip), GIO_I) & BIT(offset)); +} + +static void __em_gio_set(struct gpio_chip *chip, unsigned int reg, + unsigned shift, int value) +{ + /* upper 16 bits contains mask and lower 16 actual value */ + em_gio_write(gpio_to_priv(chip), reg, + (BIT(shift + 16)) | (value << shift)); +} + +static void em_gio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + /* output is split into two registers */ + if (offset < 16) + __em_gio_set(chip, GIO_OL, offset, value); + else + __em_gio_set(chip, GIO_OH, offset - 16, value); +} + +static int em_gio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + /* write GPIO value to output before selecting output mode of pin */ + em_gio_set(chip, offset, value); + em_gio_write(gpio_to_priv(chip), GIO_E1, BIT(offset)); + return 0; +} + +static int em_gio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset); +} + +static int em_gio_request(struct gpio_chip *chip, unsigned offset) +{ + return pinctrl_gpio_request(chip->base + offset); +} + +static void em_gio_free(struct gpio_chip *chip, unsigned offset) +{ + pinctrl_gpio_free(chip->base + offset); + + /* Set the GPIO as an input to ensure that the next GPIO request won't + * drive the GPIO pin as an output. + */ + em_gio_direction_input(chip, offset); +} + +static int em_gio_irq_domain_map(struct irq_domain *h, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct em_gio_priv *p = h->host_data; + + pr_debug("gio: map hw irq = %d, irq = %d\n", (int)hwirq, irq); + + irq_set_chip_data(irq, h->host_data); + irq_set_chip_and_handler(irq, &p->irq_chip, handle_level_irq); + return 0; +} + +static const struct irq_domain_ops em_gio_irq_domain_ops = { + .map = em_gio_irq_domain_map, + .xlate = irq_domain_xlate_twocell, +}; + +static int em_gio_probe(struct platform_device *pdev) +{ + struct em_gio_priv *p; + struct resource *io[2], *irq[2]; + struct gpio_chip *gpio_chip; + struct irq_chip *irq_chip; + const char *name = dev_name(&pdev->dev); + unsigned int ngpios; + int ret; + + p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); + if (!p) { + ret = -ENOMEM; + goto err0; + } + + p->pdev = pdev; + platform_set_drvdata(pdev, p); + spin_lock_init(&p->sense_lock); + + io[0] = platform_get_resource(pdev, IORESOURCE_MEM, 0); + io[1] = platform_get_resource(pdev, IORESOURCE_MEM, 1); + irq[0] = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + irq[1] = platform_get_resource(pdev, IORESOURCE_IRQ, 1); + + if (!io[0] || !io[1] || !irq[0] || !irq[1]) { + dev_err(&pdev->dev, "missing IRQ or IOMEM\n"); + ret = -EINVAL; + goto err0; + } + + p->base0 = devm_ioremap_nocache(&pdev->dev, io[0]->start, + resource_size(io[0])); + if (!p->base0) { + dev_err(&pdev->dev, "failed to remap low I/O memory\n"); + ret = -ENXIO; + goto err0; + } + + p->base1 = devm_ioremap_nocache(&pdev->dev, io[1]->start, + resource_size(io[1])); + if (!p->base1) { + dev_err(&pdev->dev, "failed to remap high I/O memory\n"); + ret = -ENXIO; + goto err0; + } + + if (of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpios)) { + dev_err(&pdev->dev, "Missing ngpios OF property\n"); + ret = -EINVAL; + goto err0; + } + + gpio_chip = &p->gpio_chip; + gpio_chip->of_node = pdev->dev.of_node; + gpio_chip->direction_input = em_gio_direction_input; + gpio_chip->get = em_gio_get; + gpio_chip->direction_output = em_gio_direction_output; + gpio_chip->set = em_gio_set; + gpio_chip->to_irq = em_gio_to_irq; + gpio_chip->request = em_gio_request; + gpio_chip->free = em_gio_free; + gpio_chip->label = name; + gpio_chip->parent = &pdev->dev; + gpio_chip->owner = THIS_MODULE; + gpio_chip->base = -1; + gpio_chip->ngpio = ngpios; + + irq_chip = &p->irq_chip; + irq_chip->name = name; + irq_chip->irq_mask = em_gio_irq_disable; + irq_chip->irq_unmask = em_gio_irq_enable; + irq_chip->irq_set_type = em_gio_irq_set_type; + irq_chip->irq_request_resources = em_gio_irq_reqres; + irq_chip->irq_release_resources = em_gio_irq_relres; + irq_chip->flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND; + + p->irq_domain = irq_domain_add_simple(pdev->dev.of_node, ngpios, 0, + &em_gio_irq_domain_ops, p); + if (!p->irq_domain) { + ret = -ENXIO; + dev_err(&pdev->dev, "cannot initialize irq domain\n"); + goto err0; + } + + if (devm_request_irq(&pdev->dev, irq[0]->start, + em_gio_irq_handler, 0, name, p)) { + dev_err(&pdev->dev, "failed to request low IRQ\n"); + ret = -ENOENT; + goto err1; + } + + if (devm_request_irq(&pdev->dev, irq[1]->start, + em_gio_irq_handler, 0, name, p)) { + dev_err(&pdev->dev, "failed to request high IRQ\n"); + ret = -ENOENT; + goto err1; + } + + ret = gpiochip_add_data(gpio_chip, p); + if (ret) { + dev_err(&pdev->dev, "failed to add GPIO controller\n"); + goto err1; + } + + return 0; + +err1: + irq_domain_remove(p->irq_domain); +err0: + return ret; +} + +static int em_gio_remove(struct platform_device *pdev) +{ + struct em_gio_priv *p = platform_get_drvdata(pdev); + + gpiochip_remove(&p->gpio_chip); + + irq_domain_remove(p->irq_domain); + return 0; +} + +static const struct of_device_id em_gio_dt_ids[] = { + { .compatible = "renesas,em-gio", }, + {}, +}; +MODULE_DEVICE_TABLE(of, em_gio_dt_ids); + +static struct platform_driver em_gio_device_driver = { + .probe = em_gio_probe, + .remove = em_gio_remove, + .driver = { + .name = "em_gio", + .of_match_table = em_gio_dt_ids, + } +}; + +static int __init em_gio_init(void) +{ + return platform_driver_register(&em_gio_device_driver); +} +postcore_initcall(em_gio_init); + +static void __exit em_gio_exit(void) +{ + platform_driver_unregister(&em_gio_device_driver); +} +module_exit(em_gio_exit); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("Renesas Emma Mobile GIO Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c new file mode 100644 index 000000000..45d384039 --- /dev/null +++ b/drivers/gpio/gpio-ep93xx.c @@ -0,0 +1,397 @@ +/* + * Generic EP93xx GPIO handling + * + * Copyright (c) 2008 Ryan Mallon + * Copyright (c) 2011 H Hartley Sweeten <hsweeten@visionengravers.com> + * + * Based on code originally from: + * linux/arch/arm/mach-ep93xx/core.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/gpio/driver.h> +/* FIXME: this is here for gpio_to_irq() - get rid of this! */ +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <mach/gpio-ep93xx.h> + +#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0)) + +struct ep93xx_gpio { + void __iomem *mmio_base; + struct gpio_chip gc[8]; +}; + +/************************************************************************* + * Interrupt handling for EP93xx on-chip GPIOs + *************************************************************************/ +static unsigned char gpio_int_unmasked[3]; +static unsigned char gpio_int_enabled[3]; +static unsigned char gpio_int_type1[3]; +static unsigned char gpio_int_type2[3]; +static unsigned char gpio_int_debounce[3]; + +/* Port ordering is: A B F */ +static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; +static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; +static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; +static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 }; +static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 }; + +static void ep93xx_gpio_update_int_params(unsigned port) +{ + BUG_ON(port > 2); + + writeb_relaxed(0, EP93XX_GPIO_REG(int_en_register_offset[port])); + + writeb_relaxed(gpio_int_type2[port], + EP93XX_GPIO_REG(int_type2_register_offset[port])); + + writeb_relaxed(gpio_int_type1[port], + EP93XX_GPIO_REG(int_type1_register_offset[port])); + + writeb(gpio_int_unmasked[port] & gpio_int_enabled[port], + EP93XX_GPIO_REG(int_en_register_offset[port])); +} + +static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable) +{ + int line = irq_to_gpio(irq); + int port = line >> 3; + int port_mask = 1 << (line & 7); + + if (enable) + gpio_int_debounce[port] |= port_mask; + else + gpio_int_debounce[port] &= ~port_mask; + + writeb(gpio_int_debounce[port], + EP93XX_GPIO_REG(int_debounce_register_offset[port])); +} + +static void ep93xx_gpio_ab_irq_handler(struct irq_desc *desc) +{ + unsigned char status; + int i; + + status = readb(EP93XX_GPIO_A_INT_STATUS); + for (i = 0; i < 8; i++) { + if (status & (1 << i)) { + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i; + generic_handle_irq(gpio_irq); + } + } + + status = readb(EP93XX_GPIO_B_INT_STATUS); + for (i = 0; i < 8; i++) { + if (status & (1 << i)) { + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; + generic_handle_irq(gpio_irq); + } + } +} + +static void ep93xx_gpio_f_irq_handler(struct irq_desc *desc) +{ + /* + * map discontiguous hw irq range to continuous sw irq range: + * + * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) + */ + unsigned int irq = irq_desc_get_irq(desc); + int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */ + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx; + + generic_handle_irq(gpio_irq); +} + +static void ep93xx_gpio_irq_ack(struct irq_data *d) +{ + int line = irq_to_gpio(d->irq); + int port = line >> 3; + int port_mask = 1 << (line & 7); + + if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { + gpio_int_type2[port] ^= port_mask; /* switch edge direction */ + ep93xx_gpio_update_int_params(port); + } + + writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); +} + +static void ep93xx_gpio_irq_mask_ack(struct irq_data *d) +{ + int line = irq_to_gpio(d->irq); + int port = line >> 3; + int port_mask = 1 << (line & 7); + + if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) + gpio_int_type2[port] ^= port_mask; /* switch edge direction */ + + gpio_int_unmasked[port] &= ~port_mask; + ep93xx_gpio_update_int_params(port); + + writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); +} + +static void ep93xx_gpio_irq_mask(struct irq_data *d) +{ + int line = irq_to_gpio(d->irq); + int port = line >> 3; + + gpio_int_unmasked[port] &= ~(1 << (line & 7)); + ep93xx_gpio_update_int_params(port); +} + +static void ep93xx_gpio_irq_unmask(struct irq_data *d) +{ + int line = irq_to_gpio(d->irq); + int port = line >> 3; + + gpio_int_unmasked[port] |= 1 << (line & 7); + ep93xx_gpio_update_int_params(port); +} + +/* + * gpio_int_type1 controls whether the interrupt is level (0) or + * edge (1) triggered, while gpio_int_type2 controls whether it + * triggers on low/falling (0) or high/rising (1). + */ +static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) +{ + const int gpio = irq_to_gpio(d->irq); + const int port = gpio >> 3; + const int port_mask = 1 << (gpio & 7); + irq_flow_handler_t handler; + + gpio_direction_input(gpio); + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + gpio_int_type1[port] |= port_mask; + gpio_int_type2[port] |= port_mask; + handler = handle_edge_irq; + break; + case IRQ_TYPE_EDGE_FALLING: + gpio_int_type1[port] |= port_mask; + gpio_int_type2[port] &= ~port_mask; + handler = handle_edge_irq; + break; + case IRQ_TYPE_LEVEL_HIGH: + gpio_int_type1[port] &= ~port_mask; + gpio_int_type2[port] |= port_mask; + handler = handle_level_irq; + break; + case IRQ_TYPE_LEVEL_LOW: + gpio_int_type1[port] &= ~port_mask; + gpio_int_type2[port] &= ~port_mask; + handler = handle_level_irq; + break; + case IRQ_TYPE_EDGE_BOTH: + gpio_int_type1[port] |= port_mask; + /* set initial polarity based on current input level */ + if (gpio_get_value(gpio)) + gpio_int_type2[port] &= ~port_mask; /* falling */ + else + gpio_int_type2[port] |= port_mask; /* rising */ + handler = handle_edge_irq; + break; + default: + return -EINVAL; + } + + irq_set_handler_locked(d, handler); + + gpio_int_enabled[port] |= port_mask; + + ep93xx_gpio_update_int_params(port); + + return 0; +} + +static struct irq_chip ep93xx_gpio_irq_chip = { + .name = "GPIO", + .irq_ack = ep93xx_gpio_irq_ack, + .irq_mask_ack = ep93xx_gpio_irq_mask_ack, + .irq_mask = ep93xx_gpio_irq_mask, + .irq_unmask = ep93xx_gpio_irq_unmask, + .irq_set_type = ep93xx_gpio_irq_type, +}; + +static void ep93xx_gpio_init_irq(void) +{ + int gpio_irq; + + for (gpio_irq = gpio_to_irq(0); + gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { + irq_set_chip_and_handler(gpio_irq, &ep93xx_gpio_irq_chip, + handle_level_irq); + irq_clear_status_flags(gpio_irq, IRQ_NOREQUEST); + } + + irq_set_chained_handler(IRQ_EP93XX_GPIO_AB, + ep93xx_gpio_ab_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO0MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO1MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO2MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO3MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO4MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO5MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO6MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO7MUX, + ep93xx_gpio_f_irq_handler); +} + + +/************************************************************************* + * gpiolib interface for EP93xx on-chip GPIOs + *************************************************************************/ +struct ep93xx_gpio_bank { + const char *label; + int data; + int dir; + int base; + bool has_debounce; +}; + +#define EP93XX_GPIO_BANK(_label, _data, _dir, _base, _debounce) \ + { \ + .label = _label, \ + .data = _data, \ + .dir = _dir, \ + .base = _base, \ + .has_debounce = _debounce, \ + } + +static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = { + EP93XX_GPIO_BANK("A", 0x00, 0x10, 0, true), + EP93XX_GPIO_BANK("B", 0x04, 0x14, 8, true), + EP93XX_GPIO_BANK("C", 0x08, 0x18, 40, false), + EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24, false), + EP93XX_GPIO_BANK("E", 0x20, 0x24, 32, false), + EP93XX_GPIO_BANK("F", 0x30, 0x34, 16, true), + EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48, false), + EP93XX_GPIO_BANK("H", 0x40, 0x44, 56, false), +}; + +static int ep93xx_gpio_set_config(struct gpio_chip *chip, unsigned offset, + unsigned long config) +{ + int gpio = chip->base + offset; + int irq = gpio_to_irq(gpio); + u32 debounce; + + if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) + return -ENOTSUPP; + + if (irq < 0) + return -EINVAL; + + debounce = pinconf_to_config_argument(config); + ep93xx_gpio_int_debounce(irq, debounce ? true : false); + + return 0; +} + +/* + * Map GPIO A0..A7 (0..7) to irq 64..71, + * B0..B7 (7..15) to irq 72..79, and + * F0..F7 (16..24) to irq 80..87. + */ +static int ep93xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + int gpio = chip->base + offset; + + if (gpio > EP93XX_GPIO_LINE_MAX_IRQ) + return -EINVAL; + + return 64 + gpio; +} + +static int ep93xx_gpio_add_bank(struct gpio_chip *gc, struct device *dev, + void __iomem *mmio_base, struct ep93xx_gpio_bank *bank) +{ + void __iomem *data = mmio_base + bank->data; + void __iomem *dir = mmio_base + bank->dir; + int err; + + err = bgpio_init(gc, dev, 1, data, NULL, NULL, dir, NULL, 0); + if (err) + return err; + + gc->label = bank->label; + gc->base = bank->base; + + if (bank->has_debounce) { + gc->set_config = ep93xx_gpio_set_config; + gc->to_irq = ep93xx_gpio_to_irq; + } + + return devm_gpiochip_add_data(dev, gc, NULL); +} + +static int ep93xx_gpio_probe(struct platform_device *pdev) +{ + struct ep93xx_gpio *ep93xx_gpio; + struct resource *res; + int i; + struct device *dev = &pdev->dev; + + ep93xx_gpio = devm_kzalloc(dev, sizeof(struct ep93xx_gpio), GFP_KERNEL); + if (!ep93xx_gpio) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ep93xx_gpio->mmio_base = devm_ioremap_resource(dev, res); + if (IS_ERR(ep93xx_gpio->mmio_base)) + return PTR_ERR(ep93xx_gpio->mmio_base); + + for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) { + struct gpio_chip *gc = &ep93xx_gpio->gc[i]; + struct ep93xx_gpio_bank *bank = &ep93xx_gpio_banks[i]; + + if (ep93xx_gpio_add_bank(gc, &pdev->dev, + ep93xx_gpio->mmio_base, bank)) + dev_warn(&pdev->dev, "Unable to add gpio bank %s\n", + bank->label); + } + + ep93xx_gpio_init_irq(); + + return 0; +} + +static struct platform_driver ep93xx_gpio_driver = { + .driver = { + .name = "gpio-ep93xx", + }, + .probe = ep93xx_gpio_probe, +}; + +static int __init ep93xx_gpio_init(void) +{ + return platform_driver_register(&ep93xx_gpio_driver); +} +postcore_initcall(ep93xx_gpio_init); + +MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com> " + "H Hartley Sweeten <hsweeten@visionengravers.com>"); +MODULE_DESCRIPTION("EP93XX GPIO driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c new file mode 100644 index 000000000..695c19901 --- /dev/null +++ b/drivers/gpio/gpio-exar.c @@ -0,0 +1,209 @@ +/* + * GPIO driver for Exar XR17V35X chip + * + * Copyright (C) 2015 Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/gpio/driver.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_device.h> + +#define EXAR_OFFSET_MPIOLVL_LO 0x90 +#define EXAR_OFFSET_MPIOSEL_LO 0x93 +#define EXAR_OFFSET_MPIOLVL_HI 0x96 +#define EXAR_OFFSET_MPIOSEL_HI 0x99 + +#define DRIVER_NAME "gpio_exar" + +static DEFINE_IDA(ida_index); + +struct exar_gpio_chip { + struct gpio_chip gpio_chip; + struct mutex lock; + int index; + void __iomem *regs; + char name[20]; + unsigned int first_pin; +}; + +static void exar_update(struct gpio_chip *chip, unsigned int reg, int val, + unsigned int offset) +{ + struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip); + int temp; + + mutex_lock(&exar_gpio->lock); + temp = readb(exar_gpio->regs + reg); + temp &= ~BIT(offset); + if (val) + temp |= BIT(offset); + writeb(temp, exar_gpio->regs + reg); + mutex_unlock(&exar_gpio->lock); +} + +static int exar_set_direction(struct gpio_chip *chip, int direction, + unsigned int offset) +{ + struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip); + unsigned int addr = (offset + exar_gpio->first_pin) / 8 ? + EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO; + unsigned int bit = (offset + exar_gpio->first_pin) % 8; + + exar_update(chip, addr, direction, bit); + return 0; +} + +static int exar_get(struct gpio_chip *chip, unsigned int reg) +{ + struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip); + int value; + + mutex_lock(&exar_gpio->lock); + value = readb(exar_gpio->regs + reg); + mutex_unlock(&exar_gpio->lock); + + return value; +} + +static int exar_get_direction(struct gpio_chip *chip, unsigned int offset) +{ + struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip); + unsigned int addr = (offset + exar_gpio->first_pin) / 8 ? + EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO; + unsigned int bit = (offset + exar_gpio->first_pin) % 8; + + return !!(exar_get(chip, addr) & BIT(bit)); +} + +static int exar_get_value(struct gpio_chip *chip, unsigned int offset) +{ + struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip); + unsigned int addr = (offset + exar_gpio->first_pin) / 8 ? + EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO; + unsigned int bit = (offset + exar_gpio->first_pin) % 8; + + return !!(exar_get(chip, addr) & BIT(bit)); +} + +static void exar_set_value(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip); + unsigned int addr = (offset + exar_gpio->first_pin) / 8 ? + EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO; + unsigned int bit = (offset + exar_gpio->first_pin) % 8; + + exar_update(chip, addr, value, bit); +} + +static int exar_direction_output(struct gpio_chip *chip, unsigned int offset, + int value) +{ + exar_set_value(chip, offset, value); + return exar_set_direction(chip, 0, offset); +} + +static int exar_direction_input(struct gpio_chip *chip, unsigned int offset) +{ + return exar_set_direction(chip, 1, offset); +} + +static int gpio_exar_probe(struct platform_device *pdev) +{ + struct pci_dev *pcidev = to_pci_dev(pdev->dev.parent); + struct exar_gpio_chip *exar_gpio; + u32 first_pin, ngpios; + void __iomem *p; + int index, ret; + + /* + * The UART driver must have mapped region 0 prior to registering this + * device - use it. + */ + p = pcim_iomap_table(pcidev)[0]; + if (!p) + return -ENOMEM; + + ret = device_property_read_u32(&pdev->dev, "exar,first-pin", + &first_pin); + if (ret) + return ret; + + ret = device_property_read_u32(&pdev->dev, "ngpios", &ngpios); + if (ret) + return ret; + + exar_gpio = devm_kzalloc(&pdev->dev, sizeof(*exar_gpio), GFP_KERNEL); + if (!exar_gpio) + return -ENOMEM; + + mutex_init(&exar_gpio->lock); + + index = ida_simple_get(&ida_index, 0, 0, GFP_KERNEL); + if (index < 0) { + ret = index; + goto err_mutex_destroy; + } + + sprintf(exar_gpio->name, "exar_gpio%d", index); + exar_gpio->gpio_chip.label = exar_gpio->name; + exar_gpio->gpio_chip.parent = &pdev->dev; + exar_gpio->gpio_chip.direction_output = exar_direction_output; + exar_gpio->gpio_chip.direction_input = exar_direction_input; + exar_gpio->gpio_chip.get_direction = exar_get_direction; + exar_gpio->gpio_chip.get = exar_get_value; + exar_gpio->gpio_chip.set = exar_set_value; + exar_gpio->gpio_chip.base = -1; + exar_gpio->gpio_chip.ngpio = ngpios; + exar_gpio->regs = p; + exar_gpio->index = index; + exar_gpio->first_pin = first_pin; + + ret = devm_gpiochip_add_data(&pdev->dev, + &exar_gpio->gpio_chip, exar_gpio); + if (ret) + goto err_destroy; + + platform_set_drvdata(pdev, exar_gpio); + + return 0; + +err_destroy: + ida_simple_remove(&ida_index, index); +err_mutex_destroy: + mutex_destroy(&exar_gpio->lock); + return ret; +} + +static int gpio_exar_remove(struct platform_device *pdev) +{ + struct exar_gpio_chip *exar_gpio = platform_get_drvdata(pdev); + + ida_simple_remove(&ida_index, exar_gpio->index); + mutex_destroy(&exar_gpio->lock); + + return 0; +} + +static struct platform_driver gpio_exar_driver = { + .probe = gpio_exar_probe, + .remove = gpio_exar_remove, + .driver = { + .name = DRIVER_NAME, + }, +}; + +module_platform_driver(gpio_exar_driver); + +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_DESCRIPTION("Exar GPIO driver"); +MODULE_AUTHOR("Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c new file mode 100644 index 000000000..13350c9d7 --- /dev/null +++ b/drivers/gpio/gpio-f7188x.c @@ -0,0 +1,563 @@ +/* + * GPIO driver for Fintek Super-I/O F71869, F71869A, F71882, F71889 and F81866 + * + * Copyright (C) 2010-2013 LaCie + * + * Author: Simon Guinot <simon.guinot@sequanux.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio/driver.h> +#include <linux/bitops.h> + +#define DRVNAME "gpio-f7188x" + +/* + * Super-I/O registers + */ +#define SIO_LDSEL 0x07 /* Logical device select */ +#define SIO_DEVID 0x20 /* Device ID (2 bytes) */ +#define SIO_DEVREV 0x22 /* Device revision */ +#define SIO_MANID 0x23 /* Fintek ID (2 bytes) */ + +#define SIO_LD_GPIO 0x06 /* GPIO logical device */ +#define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ +#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ + +#define SIO_FINTEK_ID 0x1934 /* Manufacturer ID */ +#define SIO_F71869_ID 0x0814 /* F71869 chipset ID */ +#define SIO_F71869A_ID 0x1007 /* F71869A chipset ID */ +#define SIO_F71882_ID 0x0541 /* F71882 chipset ID */ +#define SIO_F71889_ID 0x0909 /* F71889 chipset ID */ +#define SIO_F71889A_ID 0x1005 /* F71889A chipset ID */ +#define SIO_F81866_ID 0x1010 /* F81866 chipset ID */ + +enum chips { f71869, f71869a, f71882fg, f71889a, f71889f, f81866 }; + +static const char * const f7188x_names[] = { + "f71869", + "f71869a", + "f71882fg", + "f71889a", + "f71889f", + "f81866", +}; + +struct f7188x_sio { + int addr; + enum chips type; +}; + +struct f7188x_gpio_bank { + struct gpio_chip chip; + unsigned int regbase; + struct f7188x_gpio_data *data; +}; + +struct f7188x_gpio_data { + struct f7188x_sio *sio; + int nr_bank; + struct f7188x_gpio_bank *bank; +}; + +/* + * Super-I/O functions. + */ + +static inline int superio_inb(int base, int reg) +{ + outb(reg, base); + return inb(base + 1); +} + +static int superio_inw(int base, int reg) +{ + int val; + + outb(reg++, base); + val = inb(base + 1) << 8; + outb(reg, base); + val |= inb(base + 1); + + return val; +} + +static inline void superio_outb(int base, int reg, int val) +{ + outb(reg, base); + outb(val, base + 1); +} + +static inline int superio_enter(int base) +{ + /* Don't step on other drivers' I/O space by accident. */ + if (!request_muxed_region(base, 2, DRVNAME)) { + pr_err(DRVNAME "I/O address 0x%04x already in use\n", base); + return -EBUSY; + } + + /* According to the datasheet the key must be send twice. */ + outb(SIO_UNLOCK_KEY, base); + outb(SIO_UNLOCK_KEY, base); + + return 0; +} + +static inline void superio_select(int base, int ld) +{ + outb(SIO_LDSEL, base); + outb(ld, base + 1); +} + +static inline void superio_exit(int base) +{ + outb(SIO_LOCK_KEY, base); + release_region(base, 2); +} + +/* + * GPIO chip. + */ + +static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset); +static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset); +static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset); +static int f7188x_gpio_direction_out(struct gpio_chip *chip, + unsigned offset, int value); +static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value); +static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset, + unsigned long config); + +#define F7188X_GPIO_BANK(_base, _ngpio, _regbase) \ + { \ + .chip = { \ + .label = DRVNAME, \ + .owner = THIS_MODULE, \ + .get_direction = f7188x_gpio_get_direction, \ + .direction_input = f7188x_gpio_direction_in, \ + .get = f7188x_gpio_get, \ + .direction_output = f7188x_gpio_direction_out, \ + .set = f7188x_gpio_set, \ + .set_config = f7188x_gpio_set_config, \ + .base = _base, \ + .ngpio = _ngpio, \ + .can_sleep = true, \ + }, \ + .regbase = _regbase, \ + } + +#define gpio_dir(base) (base + 0) +#define gpio_data_out(base) (base + 1) +#define gpio_data_in(base) (base + 2) +/* Output mode register (0:open drain 1:push-pull). */ +#define gpio_out_mode(base) (base + 3) + +static struct f7188x_gpio_bank f71869_gpio_bank[] = { + F7188X_GPIO_BANK(0, 6, 0xF0), + F7188X_GPIO_BANK(10, 8, 0xE0), + F7188X_GPIO_BANK(20, 8, 0xD0), + F7188X_GPIO_BANK(30, 8, 0xC0), + F7188X_GPIO_BANK(40, 8, 0xB0), + F7188X_GPIO_BANK(50, 5, 0xA0), + F7188X_GPIO_BANK(60, 6, 0x90), +}; + +static struct f7188x_gpio_bank f71869a_gpio_bank[] = { + F7188X_GPIO_BANK(0, 6, 0xF0), + F7188X_GPIO_BANK(10, 8, 0xE0), + F7188X_GPIO_BANK(20, 8, 0xD0), + F7188X_GPIO_BANK(30, 8, 0xC0), + F7188X_GPIO_BANK(40, 8, 0xB0), + F7188X_GPIO_BANK(50, 5, 0xA0), + F7188X_GPIO_BANK(60, 8, 0x90), + F7188X_GPIO_BANK(70, 8, 0x80), +}; + +static struct f7188x_gpio_bank f71882_gpio_bank[] = { + F7188X_GPIO_BANK(0, 8, 0xF0), + F7188X_GPIO_BANK(10, 8, 0xE0), + F7188X_GPIO_BANK(20, 8, 0xD0), + F7188X_GPIO_BANK(30, 4, 0xC0), + F7188X_GPIO_BANK(40, 4, 0xB0), +}; + +static struct f7188x_gpio_bank f71889a_gpio_bank[] = { + F7188X_GPIO_BANK(0, 7, 0xF0), + F7188X_GPIO_BANK(10, 7, 0xE0), + F7188X_GPIO_BANK(20, 8, 0xD0), + F7188X_GPIO_BANK(30, 8, 0xC0), + F7188X_GPIO_BANK(40, 8, 0xB0), + F7188X_GPIO_BANK(50, 5, 0xA0), + F7188X_GPIO_BANK(60, 8, 0x90), + F7188X_GPIO_BANK(70, 8, 0x80), +}; + +static struct f7188x_gpio_bank f71889_gpio_bank[] = { + F7188X_GPIO_BANK(0, 7, 0xF0), + F7188X_GPIO_BANK(10, 7, 0xE0), + F7188X_GPIO_BANK(20, 8, 0xD0), + F7188X_GPIO_BANK(30, 8, 0xC0), + F7188X_GPIO_BANK(40, 8, 0xB0), + F7188X_GPIO_BANK(50, 5, 0xA0), + F7188X_GPIO_BANK(60, 8, 0x90), + F7188X_GPIO_BANK(70, 8, 0x80), +}; + +static struct f7188x_gpio_bank f81866_gpio_bank[] = { + F7188X_GPIO_BANK(0, 8, 0xF0), + F7188X_GPIO_BANK(10, 8, 0xE0), + F7188X_GPIO_BANK(20, 8, 0xD0), + F7188X_GPIO_BANK(30, 8, 0xC0), + F7188X_GPIO_BANK(40, 8, 0xB0), + F7188X_GPIO_BANK(50, 8, 0xA0), + F7188X_GPIO_BANK(60, 8, 0x90), + F7188X_GPIO_BANK(70, 8, 0x80), + F7188X_GPIO_BANK(80, 8, 0x88), +}; + +static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + int err; + struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); + struct f7188x_sio *sio = bank->data->sio; + u8 dir; + + err = superio_enter(sio->addr); + if (err) + return err; + superio_select(sio->addr, SIO_LD_GPIO); + + dir = superio_inb(sio->addr, gpio_dir(bank->regbase)); + + superio_exit(sio->addr); + + return !(dir & 1 << offset); +} + +static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + int err; + struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); + struct f7188x_sio *sio = bank->data->sio; + u8 dir; + + err = superio_enter(sio->addr); + if (err) + return err; + superio_select(sio->addr, SIO_LD_GPIO); + + dir = superio_inb(sio->addr, gpio_dir(bank->regbase)); + dir &= ~BIT(offset); + superio_outb(sio->addr, gpio_dir(bank->regbase), dir); + + superio_exit(sio->addr); + + return 0; +} + +static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + int err; + struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); + struct f7188x_sio *sio = bank->data->sio; + u8 dir, data; + + err = superio_enter(sio->addr); + if (err) + return err; + superio_select(sio->addr, SIO_LD_GPIO); + + dir = superio_inb(sio->addr, gpio_dir(bank->regbase)); + dir = !!(dir & BIT(offset)); + if (dir) + data = superio_inb(sio->addr, gpio_data_out(bank->regbase)); + else + data = superio_inb(sio->addr, gpio_data_in(bank->regbase)); + + superio_exit(sio->addr); + + return !!(data & BIT(offset)); +} + +static int f7188x_gpio_direction_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + int err; + struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); + struct f7188x_sio *sio = bank->data->sio; + u8 dir, data_out; + + err = superio_enter(sio->addr); + if (err) + return err; + superio_select(sio->addr, SIO_LD_GPIO); + + data_out = superio_inb(sio->addr, gpio_data_out(bank->regbase)); + if (value) + data_out |= BIT(offset); + else + data_out &= ~BIT(offset); + superio_outb(sio->addr, gpio_data_out(bank->regbase), data_out); + + dir = superio_inb(sio->addr, gpio_dir(bank->regbase)); + dir |= BIT(offset); + superio_outb(sio->addr, gpio_dir(bank->regbase), dir); + + superio_exit(sio->addr); + + return 0; +} + +static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + int err; + struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); + struct f7188x_sio *sio = bank->data->sio; + u8 data_out; + + err = superio_enter(sio->addr); + if (err) + return; + superio_select(sio->addr, SIO_LD_GPIO); + + data_out = superio_inb(sio->addr, gpio_data_out(bank->regbase)); + if (value) + data_out |= BIT(offset); + else + data_out &= ~BIT(offset); + superio_outb(sio->addr, gpio_data_out(bank->regbase), data_out); + + superio_exit(sio->addr); +} + +static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset, + unsigned long config) +{ + int err; + enum pin_config_param param = pinconf_to_config_param(config); + struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); + struct f7188x_sio *sio = bank->data->sio; + u8 data; + + if (param != PIN_CONFIG_DRIVE_OPEN_DRAIN && + param != PIN_CONFIG_DRIVE_PUSH_PULL) + return -ENOTSUPP; + + err = superio_enter(sio->addr); + if (err) + return err; + superio_select(sio->addr, SIO_LD_GPIO); + + data = superio_inb(sio->addr, gpio_out_mode(bank->regbase)); + if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN) + data &= ~BIT(offset); + else + data |= BIT(offset); + superio_outb(sio->addr, gpio_out_mode(bank->regbase), data); + + superio_exit(sio->addr); + return 0; +} + +/* + * Platform device and driver. + */ + +static int f7188x_gpio_probe(struct platform_device *pdev) +{ + int err; + int i; + struct f7188x_sio *sio = dev_get_platdata(&pdev->dev); + struct f7188x_gpio_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + switch (sio->type) { + case f71869: + data->nr_bank = ARRAY_SIZE(f71869_gpio_bank); + data->bank = f71869_gpio_bank; + break; + case f71869a: + data->nr_bank = ARRAY_SIZE(f71869a_gpio_bank); + data->bank = f71869a_gpio_bank; + break; + case f71882fg: + data->nr_bank = ARRAY_SIZE(f71882_gpio_bank); + data->bank = f71882_gpio_bank; + break; + case f71889a: + data->nr_bank = ARRAY_SIZE(f71889a_gpio_bank); + data->bank = f71889a_gpio_bank; + break; + case f71889f: + data->nr_bank = ARRAY_SIZE(f71889_gpio_bank); + data->bank = f71889_gpio_bank; + break; + case f81866: + data->nr_bank = ARRAY_SIZE(f81866_gpio_bank); + data->bank = f81866_gpio_bank; + break; + default: + return -ENODEV; + } + data->sio = sio; + + platform_set_drvdata(pdev, data); + + /* For each GPIO bank, register a GPIO chip. */ + for (i = 0; i < data->nr_bank; i++) { + struct f7188x_gpio_bank *bank = &data->bank[i]; + + bank->chip.parent = &pdev->dev; + bank->data = data; + + err = devm_gpiochip_add_data(&pdev->dev, &bank->chip, bank); + if (err) { + dev_err(&pdev->dev, + "Failed to register gpiochip %d: %d\n", + i, err); + return err; + } + } + + return 0; +} + +static int __init f7188x_find(int addr, struct f7188x_sio *sio) +{ + int err; + u16 devid; + + err = superio_enter(addr); + if (err) + return err; + + err = -ENODEV; + devid = superio_inw(addr, SIO_MANID); + if (devid != SIO_FINTEK_ID) { + pr_debug(DRVNAME ": Not a Fintek device at 0x%08x\n", addr); + goto err; + } + + devid = superio_inw(addr, SIO_DEVID); + switch (devid) { + case SIO_F71869_ID: + sio->type = f71869; + break; + case SIO_F71869A_ID: + sio->type = f71869a; + break; + case SIO_F71882_ID: + sio->type = f71882fg; + break; + case SIO_F71889A_ID: + sio->type = f71889a; + break; + case SIO_F71889_ID: + sio->type = f71889f; + break; + case SIO_F81866_ID: + sio->type = f81866; + break; + default: + pr_info(DRVNAME ": Unsupported Fintek device 0x%04x\n", devid); + goto err; + } + sio->addr = addr; + err = 0; + + pr_info(DRVNAME ": Found %s at %#x, revision %d\n", + f7188x_names[sio->type], + (unsigned int) addr, + (int) superio_inb(addr, SIO_DEVREV)); + +err: + superio_exit(addr); + return err; +} + +static struct platform_device *f7188x_gpio_pdev; + +static int __init +f7188x_gpio_device_add(const struct f7188x_sio *sio) +{ + int err; + + f7188x_gpio_pdev = platform_device_alloc(DRVNAME, -1); + if (!f7188x_gpio_pdev) + return -ENOMEM; + + err = platform_device_add_data(f7188x_gpio_pdev, + sio, sizeof(*sio)); + if (err) { + pr_err(DRVNAME "Platform data allocation failed\n"); + goto err; + } + + err = platform_device_add(f7188x_gpio_pdev); + if (err) { + pr_err(DRVNAME "Device addition failed\n"); + goto err; + } + + return 0; + +err: + platform_device_put(f7188x_gpio_pdev); + + return err; +} + +/* + * Try to match a supported Fintek device by reading the (hard-wired) + * configuration I/O ports. If available, then register both the platform + * device and driver to support the GPIOs. + */ + +static struct platform_driver f7188x_gpio_driver = { + .driver = { + .name = DRVNAME, + }, + .probe = f7188x_gpio_probe, +}; + +static int __init f7188x_gpio_init(void) +{ + int err; + struct f7188x_sio sio; + + if (f7188x_find(0x2e, &sio) && + f7188x_find(0x4e, &sio)) + return -ENODEV; + + err = platform_driver_register(&f7188x_gpio_driver); + if (!err) { + err = f7188x_gpio_device_add(&sio); + if (err) + platform_driver_unregister(&f7188x_gpio_driver); + } + + return err; +} +subsys_initcall(f7188x_gpio_init); + +static void __exit f7188x_gpio_exit(void) +{ + platform_device_unregister(f7188x_gpio_pdev); + platform_driver_unregister(&f7188x_gpio_driver); +} +module_exit(f7188x_gpio_exit); + +MODULE_DESCRIPTION("GPIO driver for Super-I/O chips F71869, F71869A, F71882FG, F71889A, F71889F and F81866"); +MODULE_AUTHOR("Simon Guinot <simon.guinot@sequanux.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-ftgpio010.c b/drivers/gpio/gpio-ftgpio010.c new file mode 100644 index 000000000..868bf8501 --- /dev/null +++ b/drivers/gpio/gpio-ftgpio010.c @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Faraday Technolog FTGPIO010 gpiochip and interrupt routines + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * + * Based on arch/arm/mach-gemini/gpio.c: + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * Based on plat-mxc/gpio.c: + * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + */ +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/bitops.h> + +/* GPIO registers definition */ +#define GPIO_DATA_OUT 0x00 +#define GPIO_DATA_IN 0x04 +#define GPIO_DIR 0x08 +#define GPIO_BYPASS_IN 0x0C +#define GPIO_DATA_SET 0x10 +#define GPIO_DATA_CLR 0x14 +#define GPIO_PULL_EN 0x18 +#define GPIO_PULL_TYPE 0x1C +#define GPIO_INT_EN 0x20 +#define GPIO_INT_STAT_RAW 0x24 +#define GPIO_INT_STAT_MASKED 0x28 +#define GPIO_INT_MASK 0x2C +#define GPIO_INT_CLR 0x30 +#define GPIO_INT_TYPE 0x34 +#define GPIO_INT_BOTH_EDGE 0x38 +#define GPIO_INT_LEVEL 0x3C +#define GPIO_DEBOUNCE_EN 0x40 +#define GPIO_DEBOUNCE_PRESCALE 0x44 + +/** + * struct ftgpio_gpio - Gemini GPIO state container + * @dev: containing device for this instance + * @gc: gpiochip for this instance + */ +struct ftgpio_gpio { + struct device *dev; + struct gpio_chip gc; + void __iomem *base; +}; + +static void ftgpio_gpio_ack_irq(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct ftgpio_gpio *g = gpiochip_get_data(gc); + + writel(BIT(irqd_to_hwirq(d)), g->base + GPIO_INT_CLR); +} + +static void ftgpio_gpio_mask_irq(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct ftgpio_gpio *g = gpiochip_get_data(gc); + u32 val; + + val = readl(g->base + GPIO_INT_EN); + val &= ~BIT(irqd_to_hwirq(d)); + writel(val, g->base + GPIO_INT_EN); +} + +static void ftgpio_gpio_unmask_irq(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct ftgpio_gpio *g = gpiochip_get_data(gc); + u32 val; + + val = readl(g->base + GPIO_INT_EN); + val |= BIT(irqd_to_hwirq(d)); + writel(val, g->base + GPIO_INT_EN); +} + +static int ftgpio_gpio_set_irq_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct ftgpio_gpio *g = gpiochip_get_data(gc); + u32 mask = BIT(irqd_to_hwirq(d)); + u32 reg_both, reg_level, reg_type; + + reg_type = readl(g->base + GPIO_INT_TYPE); + reg_level = readl(g->base + GPIO_INT_LEVEL); + reg_both = readl(g->base + GPIO_INT_BOTH_EDGE); + + switch (type) { + case IRQ_TYPE_EDGE_BOTH: + irq_set_handler_locked(d, handle_edge_irq); + reg_type &= ~mask; + reg_both |= mask; + break; + case IRQ_TYPE_EDGE_RISING: + irq_set_handler_locked(d, handle_edge_irq); + reg_type &= ~mask; + reg_both &= ~mask; + reg_level &= ~mask; + break; + case IRQ_TYPE_EDGE_FALLING: + irq_set_handler_locked(d, handle_edge_irq); + reg_type &= ~mask; + reg_both &= ~mask; + reg_level |= mask; + break; + case IRQ_TYPE_LEVEL_HIGH: + irq_set_handler_locked(d, handle_level_irq); + reg_type |= mask; + reg_level &= ~mask; + break; + case IRQ_TYPE_LEVEL_LOW: + irq_set_handler_locked(d, handle_level_irq); + reg_type |= mask; + reg_level |= mask; + break; + default: + irq_set_handler_locked(d, handle_bad_irq); + return -EINVAL; + } + + writel(reg_type, g->base + GPIO_INT_TYPE); + writel(reg_level, g->base + GPIO_INT_LEVEL); + writel(reg_both, g->base + GPIO_INT_BOTH_EDGE); + + ftgpio_gpio_ack_irq(d); + + return 0; +} + +static struct irq_chip ftgpio_gpio_irqchip = { + .name = "FTGPIO010", + .irq_ack = ftgpio_gpio_ack_irq, + .irq_mask = ftgpio_gpio_mask_irq, + .irq_unmask = ftgpio_gpio_unmask_irq, + .irq_set_type = ftgpio_gpio_set_irq_type, +}; + +static void ftgpio_gpio_irq_handler(struct irq_desc *desc) +{ + struct gpio_chip *gc = irq_desc_get_handler_data(desc); + struct ftgpio_gpio *g = gpiochip_get_data(gc); + struct irq_chip *irqchip = irq_desc_get_chip(desc); + int offset; + unsigned long stat; + + chained_irq_enter(irqchip, desc); + + stat = readl(g->base + GPIO_INT_STAT_RAW); + if (stat) + for_each_set_bit(offset, &stat, gc->ngpio) + generic_handle_irq(irq_find_mapping(gc->irq.domain, + offset)); + + chained_irq_exit(irqchip, desc); +} + +static int ftgpio_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct ftgpio_gpio *g; + int irq; + int ret; + + g = devm_kzalloc(dev, sizeof(*g), GFP_KERNEL); + if (!g) + return -ENOMEM; + + g->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + g->base = devm_ioremap_resource(dev, res); + if (IS_ERR(g->base)) + return PTR_ERR(g->base); + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return irq ? irq : -EINVAL; + + ret = bgpio_init(&g->gc, dev, 4, + g->base + GPIO_DATA_IN, + g->base + GPIO_DATA_SET, + g->base + GPIO_DATA_CLR, + g->base + GPIO_DIR, + NULL, + 0); + if (ret) { + dev_err(dev, "unable to init generic GPIO\n"); + return ret; + } + g->gc.label = "FTGPIO010"; + g->gc.base = -1; + g->gc.parent = dev; + g->gc.owner = THIS_MODULE; + /* ngpio is set by bgpio_init() */ + + ret = devm_gpiochip_add_data(dev, &g->gc, g); + if (ret) + return ret; + + /* Disable, unmask and clear all interrupts */ + writel(0x0, g->base + GPIO_INT_EN); + writel(0x0, g->base + GPIO_INT_MASK); + writel(~0x0, g->base + GPIO_INT_CLR); + + ret = gpiochip_irqchip_add(&g->gc, &ftgpio_gpio_irqchip, + 0, handle_bad_irq, + IRQ_TYPE_NONE); + if (ret) { + dev_info(dev, "could not add irqchip\n"); + return ret; + } + gpiochip_set_chained_irqchip(&g->gc, &ftgpio_gpio_irqchip, + irq, ftgpio_gpio_irq_handler); + + dev_info(dev, "FTGPIO010 @%p registered\n", g->base); + + return 0; +} + +static const struct of_device_id ftgpio_gpio_of_match[] = { + { + .compatible = "cortina,gemini-gpio", + }, + { + .compatible = "moxa,moxart-gpio", + }, + { + .compatible = "faraday,ftgpio010", + }, + {}, +}; + +static struct platform_driver ftgpio_gpio_driver = { + .driver = { + .name = "ftgpio010-gpio", + .of_match_table = of_match_ptr(ftgpio_gpio_of_match), + }, + .probe = ftgpio_gpio_probe, +}; +builtin_platform_driver(ftgpio_gpio_driver); diff --git a/drivers/gpio/gpio-ge.c b/drivers/gpio/gpio-ge.c new file mode 100644 index 000000000..636952769 --- /dev/null +++ b/drivers/gpio/gpio-ge.c @@ -0,0 +1,109 @@ +/* + * Driver for GE FPGA based GPIO + * + * Author: Martyn Welch <martyn.welch@ge.com> + * + * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* TODO + * + * Configuration of output modes (totem-pole/open-drain) + * Interrupt configuration - interrupts are always generated the FPGA relies on + * the I/O interrupt controllers mask to stop them propergating + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/module.h> +#include <linux/gpio/driver.h> + +#define GEF_GPIO_DIRECT 0x00 +#define GEF_GPIO_IN 0x04 +#define GEF_GPIO_OUT 0x08 +#define GEF_GPIO_TRIG 0x0C +#define GEF_GPIO_POLAR_A 0x10 +#define GEF_GPIO_POLAR_B 0x14 +#define GEF_GPIO_INT_STAT 0x18 +#define GEF_GPIO_OVERRUN 0x1C +#define GEF_GPIO_MODE 0x20 + +static const struct of_device_id gef_gpio_ids[] = { + { + .compatible = "gef,sbc610-gpio", + .data = (void *)19, + }, { + .compatible = "gef,sbc310-gpio", + .data = (void *)6, + }, { + .compatible = "ge,imp3a-gpio", + .data = (void *)16, + }, + { } +}; +MODULE_DEVICE_TABLE(of, gef_gpio_ids); + +static int __init gef_gpio_probe(struct platform_device *pdev) +{ + struct gpio_chip *gc; + void __iomem *regs; + int ret; + + gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL); + if (!gc) + return -ENOMEM; + + regs = of_iomap(pdev->dev.of_node, 0); + if (!regs) + return -ENOMEM; + + ret = bgpio_init(gc, &pdev->dev, 4, regs + GEF_GPIO_IN, + regs + GEF_GPIO_OUT, NULL, NULL, + regs + GEF_GPIO_DIRECT, BGPIOF_BIG_ENDIAN_BYTE_ORDER); + if (ret) { + dev_err(&pdev->dev, "bgpio_init failed\n"); + goto err0; + } + + /* Setup pointers to chip functions */ + gc->label = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%pOF", pdev->dev.of_node); + if (!gc->label) { + ret = -ENOMEM; + goto err0; + } + + gc->base = -1; + gc->ngpio = (u16)(uintptr_t)of_device_get_match_data(&pdev->dev); + gc->of_gpio_n_cells = 2; + gc->of_node = pdev->dev.of_node; + + /* This function adds a memory mapped GPIO chip */ + ret = devm_gpiochip_add_data(&pdev->dev, gc, NULL); + if (ret) + goto err0; + + return 0; +err0: + iounmap(regs); + pr_err("%pOF: GPIO chip registration failed\n", pdev->dev.of_node); + return ret; +}; + +static struct platform_driver gef_gpio_driver = { + .driver = { + .name = "gef-gpio", + .of_match_table = gef_gpio_ids, + }, +}; +module_platform_driver_probe(gef_gpio_driver, gef_gpio_probe); + +MODULE_DESCRIPTION("GE I/O FPGA GPIO driver"); +MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-gpio-mm.c b/drivers/gpio/gpio-gpio-mm.c new file mode 100644 index 000000000..b56ff2efb --- /dev/null +++ b/drivers/gpio/gpio-gpio-mm.c @@ -0,0 +1,354 @@ +/* + * GPIO driver for the Diamond Systems GPIO-MM + * Copyright (C) 2016 William Breathitt Gray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * This driver supports the following Diamond Systems devices: GPIO-MM and + * GPIO-MM-12. + */ +#include <linux/bitmap.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/isa.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> + +#define GPIOMM_EXTENT 8 +#define MAX_NUM_GPIOMM max_num_isa_dev(GPIOMM_EXTENT) + +static unsigned int base[MAX_NUM_GPIOMM]; +static unsigned int num_gpiomm; +module_param_hw_array(base, uint, ioport, &num_gpiomm, 0); +MODULE_PARM_DESC(base, "Diamond Systems GPIO-MM base addresses"); + +/** + * struct gpiomm_gpio - GPIO device private data structure + * @chip: instance of the gpio_chip + * @io_state: bit I/O state (whether bit is set to input or output) + * @out_state: output bits state + * @control: Control registers state + * @lock: synchronization lock to prevent I/O race conditions + * @base: base port address of the GPIO device + */ +struct gpiomm_gpio { + struct gpio_chip chip; + unsigned char io_state[6]; + unsigned char out_state[6]; + unsigned char control[2]; + spinlock_t lock; + unsigned int base; +}; + +static int gpiomm_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip); + const unsigned int port = offset / 8; + const unsigned int mask = BIT(offset % 8); + + return !!(gpiommgpio->io_state[port] & mask); +} + +static int gpiomm_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip); + const unsigned int io_port = offset / 8; + const unsigned int control_port = io_port / 3; + const unsigned int control_addr = gpiommgpio->base + 3 + control_port*4; + unsigned long flags; + unsigned int control; + + spin_lock_irqsave(&gpiommgpio->lock, flags); + + /* Check if configuring Port C */ + if (io_port == 2 || io_port == 5) { + /* Port C can be configured by nibble */ + if (offset % 8 > 3) { + gpiommgpio->io_state[io_port] |= 0xF0; + gpiommgpio->control[control_port] |= BIT(3); + } else { + gpiommgpio->io_state[io_port] |= 0x0F; + gpiommgpio->control[control_port] |= BIT(0); + } + } else { + gpiommgpio->io_state[io_port] |= 0xFF; + if (io_port == 0 || io_port == 3) + gpiommgpio->control[control_port] |= BIT(4); + else + gpiommgpio->control[control_port] |= BIT(1); + } + + control = BIT(7) | gpiommgpio->control[control_port]; + outb(control, control_addr); + + spin_unlock_irqrestore(&gpiommgpio->lock, flags); + + return 0; +} + +static int gpiomm_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip); + const unsigned int io_port = offset / 8; + const unsigned int control_port = io_port / 3; + const unsigned int mask = BIT(offset % 8); + const unsigned int control_addr = gpiommgpio->base + 3 + control_port*4; + const unsigned int out_port = (io_port > 2) ? io_port + 1 : io_port; + unsigned long flags; + unsigned int control; + + spin_lock_irqsave(&gpiommgpio->lock, flags); + + /* Check if configuring Port C */ + if (io_port == 2 || io_port == 5) { + /* Port C can be configured by nibble */ + if (offset % 8 > 3) { + gpiommgpio->io_state[io_port] &= 0x0F; + gpiommgpio->control[control_port] &= ~BIT(3); + } else { + gpiommgpio->io_state[io_port] &= 0xF0; + gpiommgpio->control[control_port] &= ~BIT(0); + } + } else { + gpiommgpio->io_state[io_port] &= 0x00; + if (io_port == 0 || io_port == 3) + gpiommgpio->control[control_port] &= ~BIT(4); + else + gpiommgpio->control[control_port] &= ~BIT(1); + } + + if (value) + gpiommgpio->out_state[io_port] |= mask; + else + gpiommgpio->out_state[io_port] &= ~mask; + + control = BIT(7) | gpiommgpio->control[control_port]; + outb(control, control_addr); + + outb(gpiommgpio->out_state[io_port], gpiommgpio->base + out_port); + + spin_unlock_irqrestore(&gpiommgpio->lock, flags); + + return 0; +} + +static int gpiomm_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip); + const unsigned int port = offset / 8; + const unsigned int mask = BIT(offset % 8); + const unsigned int in_port = (port > 2) ? port + 1 : port; + unsigned long flags; + unsigned int port_state; + + spin_lock_irqsave(&gpiommgpio->lock, flags); + + /* ensure that GPIO is set for input */ + if (!(gpiommgpio->io_state[port] & mask)) { + spin_unlock_irqrestore(&gpiommgpio->lock, flags); + return -EINVAL; + } + + port_state = inb(gpiommgpio->base + in_port); + + spin_unlock_irqrestore(&gpiommgpio->lock, flags); + + return !!(port_state & mask); +} + +static int gpiomm_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, + unsigned long *bits) +{ + struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip); + size_t i; + static const size_t ports[] = { 0, 1, 2, 4, 5, 6 }; + const unsigned int gpio_reg_size = 8; + unsigned int bits_offset; + size_t word_index; + unsigned int word_offset; + unsigned long word_mask; + const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0); + unsigned long port_state; + + /* clear bits array to a clean slate */ + bitmap_zero(bits, chip->ngpio); + + /* get bits are evaluated a gpio port register at a time */ + for (i = 0; i < ARRAY_SIZE(ports); i++) { + /* gpio offset in bits array */ + bits_offset = i * gpio_reg_size; + + /* word index for bits array */ + word_index = BIT_WORD(bits_offset); + + /* gpio offset within current word of bits array */ + word_offset = bits_offset % BITS_PER_LONG; + + /* mask of get bits for current gpio within current word */ + word_mask = mask[word_index] & (port_mask << word_offset); + if (!word_mask) { + /* no get bits in this port so skip to next one */ + continue; + } + + /* read bits from current gpio port */ + port_state = inb(gpiommgpio->base + ports[i]); + + /* store acquired bits at respective bits array offset */ + bits[word_index] |= port_state << word_offset; + } + + return 0; +} + +static void gpiomm_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip); + const unsigned int port = offset / 8; + const unsigned int mask = BIT(offset % 8); + const unsigned int out_port = (port > 2) ? port + 1 : port; + unsigned long flags; + + spin_lock_irqsave(&gpiommgpio->lock, flags); + + if (value) + gpiommgpio->out_state[port] |= mask; + else + gpiommgpio->out_state[port] &= ~mask; + + outb(gpiommgpio->out_state[port], gpiommgpio->base + out_port); + + spin_unlock_irqrestore(&gpiommgpio->lock, flags); +} + +static void gpiomm_gpio_set_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip); + unsigned int i; + const unsigned int gpio_reg_size = 8; + unsigned int port; + unsigned int out_port; + unsigned int bitmask; + unsigned long flags; + + /* set bits are evaluated a gpio register size at a time */ + for (i = 0; i < chip->ngpio; i += gpio_reg_size) { + /* no more set bits in this mask word; skip to the next word */ + if (!mask[BIT_WORD(i)]) { + i = (BIT_WORD(i) + 1) * BITS_PER_LONG - gpio_reg_size; + continue; + } + + port = i / gpio_reg_size; + out_port = (port > 2) ? port + 1 : port; + bitmask = mask[BIT_WORD(i)] & bits[BIT_WORD(i)]; + + spin_lock_irqsave(&gpiommgpio->lock, flags); + + /* update output state data and set device gpio register */ + gpiommgpio->out_state[port] &= ~mask[BIT_WORD(i)]; + gpiommgpio->out_state[port] |= bitmask; + outb(gpiommgpio->out_state[port], gpiommgpio->base + out_port); + + spin_unlock_irqrestore(&gpiommgpio->lock, flags); + + /* prepare for next gpio register set */ + mask[BIT_WORD(i)] >>= gpio_reg_size; + bits[BIT_WORD(i)] >>= gpio_reg_size; + } +} + +#define GPIOMM_NGPIO 48 +static const char *gpiomm_names[GPIOMM_NGPIO] = { + "Port 1A0", "Port 1A1", "Port 1A2", "Port 1A3", "Port 1A4", "Port 1A5", + "Port 1A6", "Port 1A7", "Port 1B0", "Port 1B1", "Port 1B2", "Port 1B3", + "Port 1B4", "Port 1B5", "Port 1B6", "Port 1B7", "Port 1C0", "Port 1C1", + "Port 1C2", "Port 1C3", "Port 1C4", "Port 1C5", "Port 1C6", "Port 1C7", + "Port 2A0", "Port 2A1", "Port 2A2", "Port 2A3", "Port 2A4", "Port 2A5", + "Port 2A6", "Port 2A7", "Port 2B0", "Port 2B1", "Port 2B2", "Port 2B3", + "Port 2B4", "Port 2B5", "Port 2B6", "Port 2B7", "Port 2C0", "Port 2C1", + "Port 2C2", "Port 2C3", "Port 2C4", "Port 2C5", "Port 2C6", "Port 2C7", +}; + +static int gpiomm_probe(struct device *dev, unsigned int id) +{ + struct gpiomm_gpio *gpiommgpio; + const char *const name = dev_name(dev); + int err; + + gpiommgpio = devm_kzalloc(dev, sizeof(*gpiommgpio), GFP_KERNEL); + if (!gpiommgpio) + return -ENOMEM; + + if (!devm_request_region(dev, base[id], GPIOMM_EXTENT, name)) { + dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", + base[id], base[id] + GPIOMM_EXTENT); + return -EBUSY; + } + + gpiommgpio->chip.label = name; + gpiommgpio->chip.parent = dev; + gpiommgpio->chip.owner = THIS_MODULE; + gpiommgpio->chip.base = -1; + gpiommgpio->chip.ngpio = GPIOMM_NGPIO; + gpiommgpio->chip.names = gpiomm_names; + gpiommgpio->chip.get_direction = gpiomm_gpio_get_direction; + gpiommgpio->chip.direction_input = gpiomm_gpio_direction_input; + gpiommgpio->chip.direction_output = gpiomm_gpio_direction_output; + gpiommgpio->chip.get = gpiomm_gpio_get; + gpiommgpio->chip.get_multiple = gpiomm_gpio_get_multiple; + gpiommgpio->chip.set = gpiomm_gpio_set; + gpiommgpio->chip.set_multiple = gpiomm_gpio_set_multiple; + gpiommgpio->base = base[id]; + + spin_lock_init(&gpiommgpio->lock); + + err = devm_gpiochip_add_data(dev, &gpiommgpio->chip, gpiommgpio); + if (err) { + dev_err(dev, "GPIO registering failed (%d)\n", err); + return err; + } + + /* initialize all GPIO as output */ + outb(0x80, base[id] + 3); + outb(0x00, base[id]); + outb(0x00, base[id] + 1); + outb(0x00, base[id] + 2); + outb(0x80, base[id] + 7); + outb(0x00, base[id] + 4); + outb(0x00, base[id] + 5); + outb(0x00, base[id] + 6); + + return 0; +} + +static struct isa_driver gpiomm_driver = { + .probe = gpiomm_probe, + .driver = { + .name = "gpio-mm" + }, +}; + +module_isa_driver(gpiomm_driver, num_gpiomm); + +MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); +MODULE_DESCRIPTION("Diamond Systems GPIO-MM GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-grgpio.c b/drivers/gpio/gpio-grgpio.c new file mode 100644 index 000000000..c1be299e5 --- /dev/null +++ b/drivers/gpio/gpio-grgpio.c @@ -0,0 +1,493 @@ +/* + * Driver for Aeroflex Gaisler GRGPIO General Purpose I/O cores. + * + * 2013 (c) Aeroflex Gaisler AB + * + * This driver supports the GRGPIO GPIO core available in the GRLIB VHDL + * IP core library. + * + * Full documentation of the GRGPIO core can be found here: + * http://www.gaisler.com/products/grlib/grip.pdf + * + * See "Documentation/devicetree/bindings/gpio/gpio-grgpio.txt" for + * information on open firmware properties. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Contributors: Andreas Larsson <andreas@gaisler.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/gpio/driver.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/bitops.h> + +#define GRGPIO_MAX_NGPIO 32 + +#define GRGPIO_DATA 0x00 +#define GRGPIO_OUTPUT 0x04 +#define GRGPIO_DIR 0x08 +#define GRGPIO_IMASK 0x0c +#define GRGPIO_IPOL 0x10 +#define GRGPIO_IEDGE 0x14 +#define GRGPIO_BYPASS 0x18 +#define GRGPIO_IMAP_BASE 0x20 + +/* Structure for an irq of the core - called an underlying irq */ +struct grgpio_uirq { + u8 refcnt; /* Reference counter to manage requesting/freeing of uirq */ + u8 uirq; /* Underlying irq of the gpio driver */ +}; + +/* + * Structure for an irq of a gpio line handed out by this driver. The index is + * used to map to the corresponding underlying irq. + */ +struct grgpio_lirq { + s8 index; /* Index into struct grgpio_priv's uirqs, or -1 */ + u8 irq; /* irq for the gpio line */ +}; + +struct grgpio_priv { + struct gpio_chip gc; + void __iomem *regs; + struct device *dev; + + u32 imask; /* irq mask shadow register */ + + /* + * The grgpio core can have multiple "underlying" irqs. The gpio lines + * can be mapped to any one or none of these underlying irqs + * independently of each other. This driver sets up an irq domain and + * hands out separate irqs to each gpio line + */ + struct irq_domain *domain; + + /* + * This array contains information on each underlying irq, each + * irq of the grgpio core itself. + */ + struct grgpio_uirq uirqs[GRGPIO_MAX_NGPIO]; + + /* + * This array contains information for each gpio line on the irqs + * obtains from this driver. An index value of -1 for a certain gpio + * line indicates that the line has no irq. Otherwise the index connects + * the irq to the underlying irq by pointing into the uirqs array. + */ + struct grgpio_lirq lirqs[GRGPIO_MAX_NGPIO]; +}; + +static void grgpio_set_imask(struct grgpio_priv *priv, unsigned int offset, + int val) +{ + struct gpio_chip *gc = &priv->gc; + + if (val) + priv->imask |= BIT(offset); + else + priv->imask &= ~BIT(offset); + gc->write_reg(priv->regs + GRGPIO_IMASK, priv->imask); +} + +static int grgpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct grgpio_priv *priv = gpiochip_get_data(gc); + + if (offset >= gc->ngpio) + return -ENXIO; + + if (priv->lirqs[offset].index < 0) + return -ENXIO; + + return irq_create_mapping(priv->domain, offset); +} + +/* -------------------- IRQ chip functions -------------------- */ + +static int grgpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct grgpio_priv *priv = irq_data_get_irq_chip_data(d); + unsigned long flags; + u32 mask = BIT(d->hwirq); + u32 ipol; + u32 iedge; + u32 pol; + u32 edge; + + switch (type) { + case IRQ_TYPE_LEVEL_LOW: + pol = 0; + edge = 0; + break; + case IRQ_TYPE_LEVEL_HIGH: + pol = mask; + edge = 0; + break; + case IRQ_TYPE_EDGE_FALLING: + pol = 0; + edge = mask; + break; + case IRQ_TYPE_EDGE_RISING: + pol = mask; + edge = mask; + break; + default: + return -EINVAL; + } + + spin_lock_irqsave(&priv->gc.bgpio_lock, flags); + + ipol = priv->gc.read_reg(priv->regs + GRGPIO_IPOL) & ~mask; + iedge = priv->gc.read_reg(priv->regs + GRGPIO_IEDGE) & ~mask; + + priv->gc.write_reg(priv->regs + GRGPIO_IPOL, ipol | pol); + priv->gc.write_reg(priv->regs + GRGPIO_IEDGE, iedge | edge); + + spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); + + return 0; +} + +static void grgpio_irq_mask(struct irq_data *d) +{ + struct grgpio_priv *priv = irq_data_get_irq_chip_data(d); + int offset = d->hwirq; + unsigned long flags; + + spin_lock_irqsave(&priv->gc.bgpio_lock, flags); + + grgpio_set_imask(priv, offset, 0); + + spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); +} + +static void grgpio_irq_unmask(struct irq_data *d) +{ + struct grgpio_priv *priv = irq_data_get_irq_chip_data(d); + int offset = d->hwirq; + unsigned long flags; + + spin_lock_irqsave(&priv->gc.bgpio_lock, flags); + + grgpio_set_imask(priv, offset, 1); + + spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); +} + +static struct irq_chip grgpio_irq_chip = { + .name = "grgpio", + .irq_mask = grgpio_irq_mask, + .irq_unmask = grgpio_irq_unmask, + .irq_set_type = grgpio_irq_set_type, +}; + +static irqreturn_t grgpio_irq_handler(int irq, void *dev) +{ + struct grgpio_priv *priv = dev; + int ngpio = priv->gc.ngpio; + unsigned long flags; + int i; + int match = 0; + + spin_lock_irqsave(&priv->gc.bgpio_lock, flags); + + /* + * For each gpio line, call its interrupt handler if it its underlying + * irq matches the current irq that is handled. + */ + for (i = 0; i < ngpio; i++) { + struct grgpio_lirq *lirq = &priv->lirqs[i]; + + if (priv->imask & BIT(i) && lirq->index >= 0 && + priv->uirqs[lirq->index].uirq == irq) { + generic_handle_irq(lirq->irq); + match = 1; + } + } + + spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); + + if (!match) + dev_warn(priv->dev, "No gpio line matched irq %d\n", irq); + + return IRQ_HANDLED; +} + +/* + * This function will be called as a consequence of the call to + * irq_create_mapping in grgpio_to_irq + */ +static int grgpio_irq_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct grgpio_priv *priv = d->host_data; + struct grgpio_lirq *lirq; + struct grgpio_uirq *uirq; + unsigned long flags; + int offset = hwirq; + int ret = 0; + + if (!priv) + return -EINVAL; + + lirq = &priv->lirqs[offset]; + if (lirq->index < 0) + return -EINVAL; + + dev_dbg(priv->dev, "Mapping irq %d for gpio line %d\n", + irq, offset); + + spin_lock_irqsave(&priv->gc.bgpio_lock, flags); + + /* Request underlying irq if not already requested */ + lirq->irq = irq; + uirq = &priv->uirqs[lirq->index]; + if (uirq->refcnt == 0) { + spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); + ret = request_irq(uirq->uirq, grgpio_irq_handler, 0, + dev_name(priv->dev), priv); + if (ret) { + dev_err(priv->dev, + "Could not request underlying irq %d\n", + uirq->uirq); + return ret; + } + spin_lock_irqsave(&priv->gc.bgpio_lock, flags); + } + uirq->refcnt++; + + spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); + + /* Setup irq */ + irq_set_chip_data(irq, priv); + irq_set_chip_and_handler(irq, &grgpio_irq_chip, + handle_simple_irq); + irq_set_noprobe(irq); + + return ret; +} + +static void grgpio_irq_unmap(struct irq_domain *d, unsigned int irq) +{ + struct grgpio_priv *priv = d->host_data; + int index; + struct grgpio_lirq *lirq; + struct grgpio_uirq *uirq; + unsigned long flags; + int ngpio = priv->gc.ngpio; + int i; + + irq_set_chip_and_handler(irq, NULL, NULL); + irq_set_chip_data(irq, NULL); + + spin_lock_irqsave(&priv->gc.bgpio_lock, flags); + + /* Free underlying irq if last user unmapped */ + index = -1; + for (i = 0; i < ngpio; i++) { + lirq = &priv->lirqs[i]; + if (lirq->irq == irq) { + grgpio_set_imask(priv, i, 0); + lirq->irq = 0; + index = lirq->index; + break; + } + } + WARN_ON(index < 0); + + if (index >= 0) { + uirq = &priv->uirqs[lirq->index]; + uirq->refcnt--; + if (uirq->refcnt == 0) { + spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); + free_irq(uirq->uirq, priv); + return; + } + } + + spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); +} + +static const struct irq_domain_ops grgpio_irq_domain_ops = { + .map = grgpio_irq_map, + .unmap = grgpio_irq_unmap, +}; + +/* ------------------------------------------------------------ */ + +static int grgpio_probe(struct platform_device *ofdev) +{ + struct device_node *np = ofdev->dev.of_node; + void __iomem *regs; + struct gpio_chip *gc; + struct grgpio_priv *priv; + struct resource *res; + int err; + u32 prop; + s32 *irqmap; + int size; + int i; + + priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(&ofdev->dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + gc = &priv->gc; + err = bgpio_init(gc, &ofdev->dev, 4, regs + GRGPIO_DATA, + regs + GRGPIO_OUTPUT, NULL, regs + GRGPIO_DIR, NULL, + BGPIOF_BIG_ENDIAN_BYTE_ORDER); + if (err) { + dev_err(&ofdev->dev, "bgpio_init() failed\n"); + return err; + } + + priv->regs = regs; + priv->imask = gc->read_reg(regs + GRGPIO_IMASK); + priv->dev = &ofdev->dev; + + gc->of_node = np; + gc->owner = THIS_MODULE; + gc->to_irq = grgpio_to_irq; + gc->label = devm_kasprintf(&ofdev->dev, GFP_KERNEL, "%pOF", np); + gc->base = -1; + + err = of_property_read_u32(np, "nbits", &prop); + if (err || prop <= 0 || prop > GRGPIO_MAX_NGPIO) { + gc->ngpio = GRGPIO_MAX_NGPIO; + dev_dbg(&ofdev->dev, + "No or invalid nbits property: assume %d\n", gc->ngpio); + } else { + gc->ngpio = prop; + } + + /* + * The irqmap contains the index values indicating which underlying irq, + * if anyone, is connected to that line + */ + irqmap = (s32 *)of_get_property(np, "irqmap", &size); + if (irqmap) { + if (size < gc->ngpio) { + dev_err(&ofdev->dev, + "irqmap shorter than ngpio (%d < %d)\n", + size, gc->ngpio); + return -EINVAL; + } + + priv->domain = irq_domain_add_linear(np, gc->ngpio, + &grgpio_irq_domain_ops, + priv); + if (!priv->domain) { + dev_err(&ofdev->dev, "Could not add irq domain\n"); + return -EINVAL; + } + + for (i = 0; i < gc->ngpio; i++) { + struct grgpio_lirq *lirq; + int ret; + + lirq = &priv->lirqs[i]; + lirq->index = irqmap[i]; + + if (lirq->index < 0) + continue; + + ret = platform_get_irq(ofdev, lirq->index); + if (ret <= 0) { + /* + * Continue without irq functionality for that + * gpio line + */ + dev_err(priv->dev, + "Failed to get irq for offset %d\n", i); + continue; + } + priv->uirqs[lirq->index].uirq = ret; + } + } + + platform_set_drvdata(ofdev, priv); + + err = gpiochip_add_data(gc, priv); + if (err) { + dev_err(&ofdev->dev, "Could not add gpiochip\n"); + if (priv->domain) + irq_domain_remove(priv->domain); + return err; + } + + dev_info(&ofdev->dev, "regs=0x%p, base=%d, ngpio=%d, irqs=%s\n", + priv->regs, gc->base, gc->ngpio, priv->domain ? "on" : "off"); + + return 0; +} + +static int grgpio_remove(struct platform_device *ofdev) +{ + struct grgpio_priv *priv = platform_get_drvdata(ofdev); + unsigned long flags; + int i; + int ret = 0; + + spin_lock_irqsave(&priv->gc.bgpio_lock, flags); + + if (priv->domain) { + for (i = 0; i < GRGPIO_MAX_NGPIO; i++) { + if (priv->uirqs[i].refcnt != 0) { + ret = -EBUSY; + goto out; + } + } + } + + gpiochip_remove(&priv->gc); + + if (priv->domain) + irq_domain_remove(priv->domain); + +out: + spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); + + return ret; +} + +static const struct of_device_id grgpio_match[] = { + {.name = "GAISLER_GPIO"}, + {.name = "01_01a"}, + {}, +}; + +MODULE_DEVICE_TABLE(of, grgpio_match); + +static struct platform_driver grgpio_driver = { + .driver = { + .name = "grgpio", + .of_match_table = grgpio_match, + }, + .probe = grgpio_probe, + .remove = grgpio_remove, +}; +module_platform_driver(grgpio_driver); + +MODULE_AUTHOR("Aeroflex Gaisler AB."); +MODULE_DESCRIPTION("Driver for Aeroflex Gaisler GRGPIO"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-hlwd.c b/drivers/gpio/gpio-hlwd.c new file mode 100644 index 000000000..a63136a68 --- /dev/null +++ b/drivers/gpio/gpio-hlwd.c @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (C) 2008-2009 The GameCube Linux Team +// Copyright (C) 2008,2009 Albert Herranz +// Copyright (C) 2017-2018 Jonathan Neuschäfer +// +// Nintendo Wii (Hollywood) GPIO driver + +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/slab.h> + +/* + * Register names and offsets courtesy of WiiBrew: + * https://wiibrew.org/wiki/Hardware/Hollywood_GPIOs + * + * Note that for most registers, there are two versions: + * - HW_GPIOB_* Is always accessible by the Broadway PowerPC core, but does + * always give access to all GPIO lines + * - HW_GPIO_* Is only accessible by the Broadway PowerPC code if the memory + * firewall (AHBPROT) in the Hollywood chipset has been configured to allow + * such access. + * + * The ownership of each GPIO line can be configured in the HW_GPIO_OWNER + * register: A one bit configures the line for access via the HW_GPIOB_* + * registers, a zero bit indicates access via HW_GPIO_*. This driver uses + * HW_GPIOB_*. + */ +#define HW_GPIOB_OUT 0x00 +#define HW_GPIOB_DIR 0x04 +#define HW_GPIOB_IN 0x08 +#define HW_GPIOB_INTLVL 0x0c +#define HW_GPIOB_INTFLAG 0x10 +#define HW_GPIOB_INTMASK 0x14 +#define HW_GPIOB_INMIR 0x18 +#define HW_GPIO_ENABLE 0x1c +#define HW_GPIO_OUT 0x20 +#define HW_GPIO_DIR 0x24 +#define HW_GPIO_IN 0x28 +#define HW_GPIO_INTLVL 0x2c +#define HW_GPIO_INTFLAG 0x30 +#define HW_GPIO_INTMASK 0x34 +#define HW_GPIO_INMIR 0x38 +#define HW_GPIO_OWNER 0x3c + +struct hlwd_gpio { + struct gpio_chip gpioc; + void __iomem *regs; +}; + +static int hlwd_gpio_probe(struct platform_device *pdev) +{ + struct hlwd_gpio *hlwd; + struct resource *regs_resource; + u32 ngpios; + int res; + + hlwd = devm_kzalloc(&pdev->dev, sizeof(*hlwd), GFP_KERNEL); + if (!hlwd) + return -ENOMEM; + + regs_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hlwd->regs = devm_ioremap_resource(&pdev->dev, regs_resource); + if (IS_ERR(hlwd->regs)) + return PTR_ERR(hlwd->regs); + + /* + * Claim all GPIOs using the OWNER register. This will not work on + * systems where the AHBPROT memory firewall hasn't been configured to + * permit PPC access to HW_GPIO_*. + * + * Note that this has to happen before bgpio_init reads the + * HW_GPIOB_OUT and HW_GPIOB_DIR, because otherwise it reads the wrong + * values. + */ + iowrite32be(0xffffffff, hlwd->regs + HW_GPIO_OWNER); + + res = bgpio_init(&hlwd->gpioc, &pdev->dev, 4, + hlwd->regs + HW_GPIOB_IN, hlwd->regs + HW_GPIOB_OUT, + NULL, hlwd->regs + HW_GPIOB_DIR, NULL, + BGPIOF_BIG_ENDIAN_BYTE_ORDER); + if (res < 0) { + dev_warn(&pdev->dev, "bgpio_init failed: %d\n", res); + return res; + } + + res = of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpios); + if (res) + ngpios = 32; + hlwd->gpioc.ngpio = ngpios; + + return devm_gpiochip_add_data(&pdev->dev, &hlwd->gpioc, hlwd); +} + +static const struct of_device_id hlwd_gpio_match[] = { + { .compatible = "nintendo,hollywood-gpio", }, + {}, +}; +MODULE_DEVICE_TABLE(of, hlwd_gpio_match); + +static struct platform_driver hlwd_gpio_driver = { + .driver = { + .name = "gpio-hlwd", + .of_match_table = hlwd_gpio_match, + }, + .probe = hlwd_gpio_probe, +}; +module_platform_driver(hlwd_gpio_driver); + +MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>"); +MODULE_DESCRIPTION("Nintendo Wii GPIO driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-htc-egpio.c b/drivers/gpio/gpio-htc-egpio.c new file mode 100644 index 000000000..ad6e5b518 --- /dev/null +++ b/drivers/gpio/gpio-htc-egpio.c @@ -0,0 +1,427 @@ +/* + * Support for the GPIO/IRQ expander chips present on several HTC phones. + * These are implemented in CPLD chips present on the board. + * + * Copyright (c) 2007 Kevin O'Connor <kevin@koconnor.net> + * Copyright (c) 2007 Philipp Zabel <philipp.zabel@gmail.com> + * + * This file may be distributed under the terms of the GNU GPL license. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/platform_data/gpio-htc-egpio.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/gpio/driver.h> + +struct egpio_chip { + int reg_start; + int cached_values; + unsigned long is_out; + struct device *dev; + struct gpio_chip chip; +}; + +struct egpio_info { + spinlock_t lock; + + /* iomem info */ + void __iomem *base_addr; + int bus_shift; /* byte shift */ + int reg_shift; /* bit shift */ + int reg_mask; + + /* irq info */ + int ack_register; + int ack_write; + u16 irqs_enabled; + uint irq_start; + int nirqs; + uint chained_irq; + + /* egpio info */ + struct egpio_chip *chip; + int nchips; +}; + +static inline void egpio_writew(u16 value, struct egpio_info *ei, int reg) +{ + writew(value, ei->base_addr + (reg << ei->bus_shift)); +} + +static inline u16 egpio_readw(struct egpio_info *ei, int reg) +{ + return readw(ei->base_addr + (reg << ei->bus_shift)); +} + +/* + * IRQs + */ + +static inline void ack_irqs(struct egpio_info *ei) +{ + egpio_writew(ei->ack_write, ei, ei->ack_register); + pr_debug("EGPIO ack - write %x to base+%x\n", + ei->ack_write, ei->ack_register << ei->bus_shift); +} + +static void egpio_ack(struct irq_data *data) +{ +} + +/* There does not appear to be a way to proactively mask interrupts + * on the egpio chip itself. So, we simply ignore interrupts that + * aren't desired. */ +static void egpio_mask(struct irq_data *data) +{ + struct egpio_info *ei = irq_data_get_irq_chip_data(data); + ei->irqs_enabled &= ~(1 << (data->irq - ei->irq_start)); + pr_debug("EGPIO mask %d %04x\n", data->irq, ei->irqs_enabled); +} + +static void egpio_unmask(struct irq_data *data) +{ + struct egpio_info *ei = irq_data_get_irq_chip_data(data); + ei->irqs_enabled |= 1 << (data->irq - ei->irq_start); + pr_debug("EGPIO unmask %d %04x\n", data->irq, ei->irqs_enabled); +} + +static struct irq_chip egpio_muxed_chip = { + .name = "htc-egpio", + .irq_ack = egpio_ack, + .irq_mask = egpio_mask, + .irq_unmask = egpio_unmask, +}; + +static void egpio_handler(struct irq_desc *desc) +{ + struct egpio_info *ei = irq_desc_get_handler_data(desc); + int irqpin; + + /* Read current pins. */ + unsigned long readval = egpio_readw(ei, ei->ack_register); + pr_debug("IRQ reg: %x\n", (unsigned int)readval); + /* Ack/unmask interrupts. */ + ack_irqs(ei); + /* Process all set pins. */ + readval &= ei->irqs_enabled; + for_each_set_bit(irqpin, &readval, ei->nirqs) { + /* Run irq handler */ + pr_debug("got IRQ %d\n", irqpin); + generic_handle_irq(ei->irq_start + irqpin); + } +} + +int htc_egpio_get_wakeup_irq(struct device *dev) +{ + struct egpio_info *ei = dev_get_drvdata(dev); + + /* Read current pins. */ + u16 readval = egpio_readw(ei, ei->ack_register); + /* Ack/unmask interrupts. */ + ack_irqs(ei); + /* Return first set pin. */ + readval &= ei->irqs_enabled; + return ei->irq_start + ffs(readval) - 1; +} +EXPORT_SYMBOL(htc_egpio_get_wakeup_irq); + +static inline int egpio_pos(struct egpio_info *ei, int bit) +{ + return bit >> ei->reg_shift; +} + +static inline int egpio_bit(struct egpio_info *ei, int bit) +{ + return 1 << (bit & ((1 << ei->reg_shift)-1)); +} + +/* + * Input pins + */ + +static int egpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct egpio_chip *egpio; + struct egpio_info *ei; + unsigned bit; + int reg; + int value; + + pr_debug("egpio_get_value(%d)\n", chip->base + offset); + + egpio = gpiochip_get_data(chip); + ei = dev_get_drvdata(egpio->dev); + bit = egpio_bit(ei, offset); + reg = egpio->reg_start + egpio_pos(ei, offset); + + if (test_bit(offset, &egpio->is_out)) { + return !!(egpio->cached_values & (1 << offset)); + } else { + value = egpio_readw(ei, reg); + pr_debug("readw(%p + %x) = %x\n", + ei->base_addr, reg << ei->bus_shift, value); + return !!(value & bit); + } +} + +static int egpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct egpio_chip *egpio; + + egpio = gpiochip_get_data(chip); + return test_bit(offset, &egpio->is_out) ? -EINVAL : 0; +} + + +/* + * Output pins + */ + +static void egpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + unsigned long flag; + struct egpio_chip *egpio; + struct egpio_info *ei; + unsigned bit; + int pos; + int reg; + int shift; + + pr_debug("egpio_set(%s, %d(%d), %d)\n", + chip->label, offset, offset+chip->base, value); + + egpio = gpiochip_get_data(chip); + ei = dev_get_drvdata(egpio->dev); + bit = egpio_bit(ei, offset); + pos = egpio_pos(ei, offset); + reg = egpio->reg_start + pos; + shift = pos << ei->reg_shift; + + pr_debug("egpio %s: reg %d = 0x%04x\n", value ? "set" : "clear", + reg, (egpio->cached_values >> shift) & ei->reg_mask); + + spin_lock_irqsave(&ei->lock, flag); + if (value) + egpio->cached_values |= (1 << offset); + else + egpio->cached_values &= ~(1 << offset); + egpio_writew((egpio->cached_values >> shift) & ei->reg_mask, ei, reg); + spin_unlock_irqrestore(&ei->lock, flag); +} + +static int egpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct egpio_chip *egpio; + + egpio = gpiochip_get_data(chip); + if (test_bit(offset, &egpio->is_out)) { + egpio_set(chip, offset, value); + return 0; + } else { + return -EINVAL; + } +} + +static int egpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct egpio_chip *egpio; + + egpio = gpiochip_get_data(chip); + + return !test_bit(offset, &egpio->is_out); +} + +static void egpio_write_cache(struct egpio_info *ei) +{ + int i; + struct egpio_chip *egpio; + int shift; + + for (i = 0; i < ei->nchips; i++) { + egpio = &(ei->chip[i]); + if (!egpio->is_out) + continue; + + for (shift = 0; shift < egpio->chip.ngpio; + shift += (1<<ei->reg_shift)) { + + int reg = egpio->reg_start + egpio_pos(ei, shift); + + if (!((egpio->is_out >> shift) & ei->reg_mask)) + continue; + + pr_debug("EGPIO: setting %x to %x, was %x\n", reg, + (egpio->cached_values >> shift) & ei->reg_mask, + egpio_readw(ei, reg)); + + egpio_writew((egpio->cached_values >> shift) + & ei->reg_mask, ei, reg); + } + } +} + + +/* + * Setup + */ + +static int __init egpio_probe(struct platform_device *pdev) +{ + struct htc_egpio_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct resource *res; + struct egpio_info *ei; + struct gpio_chip *chip; + unsigned int irq, irq_end; + int i; + int ret; + + /* Initialize ei data structure. */ + ei = devm_kzalloc(&pdev->dev, sizeof(*ei), GFP_KERNEL); + if (!ei) + return -ENOMEM; + + spin_lock_init(&ei->lock); + + /* Find chained irq */ + ret = -EINVAL; + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res) + ei->chained_irq = res->start; + + /* Map egpio chip into virtual address space. */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + goto fail; + ei->base_addr = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!ei->base_addr) + goto fail; + pr_debug("EGPIO phys=%08x virt=%p\n", (u32)res->start, ei->base_addr); + + if ((pdata->bus_width != 16) && (pdata->bus_width != 32)) + goto fail; + ei->bus_shift = fls(pdata->bus_width - 1) - 3; + pr_debug("bus_shift = %d\n", ei->bus_shift); + + if ((pdata->reg_width != 8) && (pdata->reg_width != 16)) + goto fail; + ei->reg_shift = fls(pdata->reg_width - 1); + pr_debug("reg_shift = %d\n", ei->reg_shift); + + ei->reg_mask = (1 << pdata->reg_width) - 1; + + platform_set_drvdata(pdev, ei); + + ei->nchips = pdata->num_chips; + ei->chip = devm_kcalloc(&pdev->dev, + ei->nchips, sizeof(struct egpio_chip), + GFP_KERNEL); + if (!ei->chip) { + ret = -ENOMEM; + goto fail; + } + for (i = 0; i < ei->nchips; i++) { + ei->chip[i].reg_start = pdata->chip[i].reg_start; + ei->chip[i].cached_values = pdata->chip[i].initial_values; + ei->chip[i].is_out = pdata->chip[i].direction; + ei->chip[i].dev = &(pdev->dev); + chip = &(ei->chip[i].chip); + chip->label = "htc-egpio"; + chip->parent = &pdev->dev; + chip->owner = THIS_MODULE; + chip->get = egpio_get; + chip->set = egpio_set; + chip->direction_input = egpio_direction_input; + chip->direction_output = egpio_direction_output; + chip->get_direction = egpio_get_direction; + chip->base = pdata->chip[i].gpio_base; + chip->ngpio = pdata->chip[i].num_gpios; + + gpiochip_add_data(chip, &ei->chip[i]); + } + + /* Set initial pin values */ + egpio_write_cache(ei); + + ei->irq_start = pdata->irq_base; + ei->nirqs = pdata->num_irqs; + ei->ack_register = pdata->ack_register; + + if (ei->chained_irq) { + /* Setup irq handlers */ + ei->ack_write = 0xFFFF; + if (pdata->invert_acks) + ei->ack_write = 0; + irq_end = ei->irq_start + ei->nirqs; + for (irq = ei->irq_start; irq < irq_end; irq++) { + irq_set_chip_and_handler(irq, &egpio_muxed_chip, + handle_simple_irq); + irq_set_chip_data(irq, ei); + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); + } + irq_set_irq_type(ei->chained_irq, IRQ_TYPE_EDGE_RISING); + irq_set_chained_handler_and_data(ei->chained_irq, + egpio_handler, ei); + ack_irqs(ei); + + device_init_wakeup(&pdev->dev, 1); + } + + return 0; + +fail: + printk(KERN_ERR "EGPIO failed to setup\n"); + return ret; +} + +#ifdef CONFIG_PM +static int egpio_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct egpio_info *ei = platform_get_drvdata(pdev); + + if (ei->chained_irq && device_may_wakeup(&pdev->dev)) + enable_irq_wake(ei->chained_irq); + return 0; +} + +static int egpio_resume(struct platform_device *pdev) +{ + struct egpio_info *ei = platform_get_drvdata(pdev); + + if (ei->chained_irq && device_may_wakeup(&pdev->dev)) + disable_irq_wake(ei->chained_irq); + + /* Update registers from the cache, in case + the CPLD was powered off during suspend */ + egpio_write_cache(ei); + return 0; +} +#else +#define egpio_suspend NULL +#define egpio_resume NULL +#endif + + +static struct platform_driver egpio_driver = { + .driver = { + .name = "htc-egpio", + .suppress_bind_attrs = true, + }, + .suspend = egpio_suspend, + .resume = egpio_resume, +}; + +static int __init egpio_init(void) +{ + return platform_driver_probe(&egpio_driver, egpio_probe); +} +/* start early for dependencies */ +subsys_initcall(egpio_init); diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c new file mode 100644 index 000000000..dba392221 --- /dev/null +++ b/drivers/gpio/gpio-ich.c @@ -0,0 +1,514 @@ +/* + * Intel ICH6-10, Series 5 and 6, Atom C2000 (Avoton/Rangeley) GPIO driver + * + * Copyright (C) 2010 Extreme Engineering Solutions. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/gpio/driver.h> +#include <linux/platform_device.h> +#include <linux/mfd/lpc_ich.h> +#include <linux/bitops.h> + +#define DRV_NAME "gpio_ich" + +/* + * GPIO register offsets in GPIO I/O space. + * Each chunk of 32 GPIOs is manipulated via its own USE_SELx, IO_SELx, and + * LVLx registers. Logic in the read/write functions takes a register and + * an absolute bit number and determines the proper register offset and bit + * number in that register. For example, to read the value of GPIO bit 50 + * the code would access offset ichx_regs[2(=GPIO_LVL)][1(=50/32)], + * bit 18 (50%32). + */ +enum GPIO_REG { + GPIO_USE_SEL = 0, + GPIO_IO_SEL, + GPIO_LVL, + GPO_BLINK +}; + +static const u8 ichx_regs[4][3] = { + {0x00, 0x30, 0x40}, /* USE_SEL[1-3] offsets */ + {0x04, 0x34, 0x44}, /* IO_SEL[1-3] offsets */ + {0x0c, 0x38, 0x48}, /* LVL[1-3] offsets */ + {0x18, 0x18, 0x18}, /* BLINK offset */ +}; + +static const u8 ichx_reglen[3] = { + 0x30, 0x10, 0x10, +}; + +static const u8 avoton_regs[4][3] = { + {0x00, 0x80, 0x00}, + {0x04, 0x84, 0x00}, + {0x08, 0x88, 0x00}, +}; + +static const u8 avoton_reglen[3] = { + 0x10, 0x10, 0x00, +}; + +#define ICHX_WRITE(val, reg, base_res) outl(val, (reg) + (base_res)->start) +#define ICHX_READ(reg, base_res) inl((reg) + (base_res)->start) + +struct ichx_desc { + /* Max GPIO pins the chipset can have */ + uint ngpio; + + /* chipset registers */ + const u8 (*regs)[3]; + const u8 *reglen; + + /* GPO_BLINK is available on this chipset */ + bool have_blink; + + /* Whether the chipset has GPIO in GPE0_STS in the PM IO region */ + bool uses_gpe0; + + /* USE_SEL is bogus on some chipsets, eg 3100 */ + u32 use_sel_ignore[3]; + + /* Some chipsets have quirks, let these use their own request/get */ + int (*request)(struct gpio_chip *chip, unsigned offset); + int (*get)(struct gpio_chip *chip, unsigned offset); + + /* + * Some chipsets don't let reading output values on GPIO_LVL register + * this option allows driver caching written output values + */ + bool use_outlvl_cache; +}; + +static struct { + spinlock_t lock; + struct platform_device *dev; + struct gpio_chip chip; + struct resource *gpio_base; /* GPIO IO base */ + struct resource *pm_base; /* Power Mangagment IO base */ + struct ichx_desc *desc; /* Pointer to chipset-specific description */ + u32 orig_gpio_ctrl; /* Orig CTRL value, used to restore on exit */ + u8 use_gpio; /* Which GPIO groups are usable */ + int outlvl_cache[3]; /* cached output values */ +} ichx_priv; + +static int modparam_gpiobase = -1; /* dynamic */ +module_param_named(gpiobase, modparam_gpiobase, int, 0444); +MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, " + "which is the default."); + +static int ichx_write_bit(int reg, unsigned nr, int val, int verify) +{ + unsigned long flags; + u32 data, tmp; + int reg_nr = nr / 32; + int bit = nr & 0x1f; + int ret = 0; + + spin_lock_irqsave(&ichx_priv.lock, flags); + + if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache) + data = ichx_priv.outlvl_cache[reg_nr]; + else + data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr], + ichx_priv.gpio_base); + + if (val) + data |= BIT(bit); + else + data &= ~BIT(bit); + ICHX_WRITE(data, ichx_priv.desc->regs[reg][reg_nr], + ichx_priv.gpio_base); + if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache) + ichx_priv.outlvl_cache[reg_nr] = data; + + tmp = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr], + ichx_priv.gpio_base); + if (verify && data != tmp) + ret = -EPERM; + + spin_unlock_irqrestore(&ichx_priv.lock, flags); + + return ret; +} + +static int ichx_read_bit(int reg, unsigned nr) +{ + unsigned long flags; + u32 data; + int reg_nr = nr / 32; + int bit = nr & 0x1f; + + spin_lock_irqsave(&ichx_priv.lock, flags); + + data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr], + ichx_priv.gpio_base); + + if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache) + data = ichx_priv.outlvl_cache[reg_nr] | data; + + spin_unlock_irqrestore(&ichx_priv.lock, flags); + + return !!(data & BIT(bit)); +} + +static bool ichx_gpio_check_available(struct gpio_chip *gpio, unsigned nr) +{ + return !!(ichx_priv.use_gpio & BIT(nr / 32)); +} + +static int ichx_gpio_get_direction(struct gpio_chip *gpio, unsigned nr) +{ + return ichx_read_bit(GPIO_IO_SEL, nr); +} + +static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) +{ + /* + * Try setting pin as an input and verify it worked since many pins + * are output-only. + */ + if (ichx_write_bit(GPIO_IO_SEL, nr, 1, 1)) + return -EINVAL; + + return 0; +} + +static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned nr, + int val) +{ + /* Disable blink hardware which is available for GPIOs from 0 to 31. */ + if (nr < 32 && ichx_priv.desc->have_blink) + ichx_write_bit(GPO_BLINK, nr, 0, 0); + + /* Set GPIO output value. */ + ichx_write_bit(GPIO_LVL, nr, val, 0); + + /* + * Try setting pin as an output and verify it worked since many pins + * are input-only. + */ + if (ichx_write_bit(GPIO_IO_SEL, nr, 0, 1)) + return -EINVAL; + + return 0; +} + +static int ichx_gpio_get(struct gpio_chip *chip, unsigned nr) +{ + return ichx_read_bit(GPIO_LVL, nr); +} + +static int ich6_gpio_get(struct gpio_chip *chip, unsigned nr) +{ + unsigned long flags; + u32 data; + + /* + * GPI 0 - 15 need to be read from the power management registers on + * a ICH6/3100 bridge. + */ + if (nr < 16) { + if (!ichx_priv.pm_base) + return -ENXIO; + + spin_lock_irqsave(&ichx_priv.lock, flags); + + /* GPI 0 - 15 are latched, write 1 to clear*/ + ICHX_WRITE(BIT(16 + nr), 0, ichx_priv.pm_base); + data = ICHX_READ(0, ichx_priv.pm_base); + + spin_unlock_irqrestore(&ichx_priv.lock, flags); + + return !!((data >> 16) & BIT(nr)); + } else { + return ichx_gpio_get(chip, nr); + } +} + +static int ichx_gpio_request(struct gpio_chip *chip, unsigned nr) +{ + if (!ichx_gpio_check_available(chip, nr)) + return -ENXIO; + + /* + * Note we assume the BIOS properly set a bridge's USE value. Some + * chips (eg Intel 3100) have bogus USE values though, so first see if + * the chipset's USE value can be trusted for this specific bit. + * If it can't be trusted, assume that the pin can be used as a GPIO. + */ + if (ichx_priv.desc->use_sel_ignore[nr / 32] & BIT(nr & 0x1f)) + return 0; + + return ichx_read_bit(GPIO_USE_SEL, nr) ? 0 : -ENODEV; +} + +static int ich6_gpio_request(struct gpio_chip *chip, unsigned nr) +{ + /* + * Fixups for bits 16 and 17 are necessary on the Intel ICH6/3100 + * bridge as they are controlled by USE register bits 0 and 1. See + * "Table 704 GPIO_USE_SEL1 register" in the i3100 datasheet for + * additional info. + */ + if (nr == 16 || nr == 17) + nr -= 16; + + return ichx_gpio_request(chip, nr); +} + +static void ichx_gpio_set(struct gpio_chip *chip, unsigned nr, int val) +{ + ichx_write_bit(GPIO_LVL, nr, val, 0); +} + +static void ichx_gpiolib_setup(struct gpio_chip *chip) +{ + chip->owner = THIS_MODULE; + chip->label = DRV_NAME; + chip->parent = &ichx_priv.dev->dev; + + /* Allow chip-specific overrides of request()/get() */ + chip->request = ichx_priv.desc->request ? + ichx_priv.desc->request : ichx_gpio_request; + chip->get = ichx_priv.desc->get ? + ichx_priv.desc->get : ichx_gpio_get; + + chip->set = ichx_gpio_set; + chip->get_direction = ichx_gpio_get_direction; + chip->direction_input = ichx_gpio_direction_input; + chip->direction_output = ichx_gpio_direction_output; + chip->base = modparam_gpiobase; + chip->ngpio = ichx_priv.desc->ngpio; + chip->can_sleep = false; + chip->dbg_show = NULL; +} + +/* ICH6-based, 631xesb-based */ +static struct ichx_desc ich6_desc = { + /* Bridges using the ICH6 controller need fixups for GPIO 0 - 17 */ + .request = ich6_gpio_request, + .get = ich6_gpio_get, + + /* GPIO 0-15 are read in the GPE0_STS PM register */ + .uses_gpe0 = true, + + .ngpio = 50, + .have_blink = true, + .regs = ichx_regs, + .reglen = ichx_reglen, +}; + +/* Intel 3100 */ +static struct ichx_desc i3100_desc = { + /* + * Bits 16,17, 20 of USE_SEL and bit 16 of USE_SEL2 always read 0 on + * the Intel 3100. See "Table 712. GPIO Summary Table" of 3100 + * Datasheet for more info. + */ + .use_sel_ignore = {0x00130000, 0x00010000, 0x0}, + + /* The 3100 needs fixups for GPIO 0 - 17 */ + .request = ich6_gpio_request, + .get = ich6_gpio_get, + + /* GPIO 0-15 are read in the GPE0_STS PM register */ + .uses_gpe0 = true, + + .ngpio = 50, + .regs = ichx_regs, + .reglen = ichx_reglen, +}; + +/* ICH7 and ICH8-based */ +static struct ichx_desc ich7_desc = { + .ngpio = 50, + .have_blink = true, + .regs = ichx_regs, + .reglen = ichx_reglen, +}; + +/* ICH9-based */ +static struct ichx_desc ich9_desc = { + .ngpio = 61, + .have_blink = true, + .regs = ichx_regs, + .reglen = ichx_reglen, +}; + +/* ICH10-based - Consumer/corporate versions have different amount of GPIO */ +static struct ichx_desc ich10_cons_desc = { + .ngpio = 61, + .have_blink = true, + .regs = ichx_regs, + .reglen = ichx_reglen, +}; +static struct ichx_desc ich10_corp_desc = { + .ngpio = 72, + .have_blink = true, + .regs = ichx_regs, + .reglen = ichx_reglen, +}; + +/* Intel 5 series, 6 series, 3400 series, and C200 series */ +static struct ichx_desc intel5_desc = { + .ngpio = 76, + .regs = ichx_regs, + .reglen = ichx_reglen, +}; + +/* Avoton */ +static struct ichx_desc avoton_desc = { + /* Avoton has only 59 GPIOs, but we assume the first set of register + * (Core) has 32 instead of 31 to keep gpio-ich compliance + */ + .ngpio = 60, + .regs = avoton_regs, + .reglen = avoton_reglen, + .use_outlvl_cache = true, +}; + +static int ichx_gpio_request_regions(struct device *dev, + struct resource *res_base, const char *name, u8 use_gpio) +{ + int i; + + if (!res_base || !res_base->start || !res_base->end) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(ichx_priv.desc->regs[0]); i++) { + if (!(use_gpio & BIT(i))) + continue; + if (!devm_request_region(dev, + res_base->start + ichx_priv.desc->regs[0][i], + ichx_priv.desc->reglen[i], name)) + return -EBUSY; + } + return 0; +} + +static int ichx_gpio_probe(struct platform_device *pdev) +{ + struct resource *res_base, *res_pm; + int err; + struct lpc_ich_info *ich_info = dev_get_platdata(&pdev->dev); + + if (!ich_info) + return -ENODEV; + + ichx_priv.dev = pdev; + + switch (ich_info->gpio_version) { + case ICH_I3100_GPIO: + ichx_priv.desc = &i3100_desc; + break; + case ICH_V5_GPIO: + ichx_priv.desc = &intel5_desc; + break; + case ICH_V6_GPIO: + ichx_priv.desc = &ich6_desc; + break; + case ICH_V7_GPIO: + ichx_priv.desc = &ich7_desc; + break; + case ICH_V9_GPIO: + ichx_priv.desc = &ich9_desc; + break; + case ICH_V10CORP_GPIO: + ichx_priv.desc = &ich10_corp_desc; + break; + case ICH_V10CONS_GPIO: + ichx_priv.desc = &ich10_cons_desc; + break; + case AVOTON_GPIO: + ichx_priv.desc = &avoton_desc; + break; + default: + return -ENODEV; + } + + spin_lock_init(&ichx_priv.lock); + res_base = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPIO); + ichx_priv.use_gpio = ich_info->use_gpio; + err = ichx_gpio_request_regions(&pdev->dev, res_base, pdev->name, + ichx_priv.use_gpio); + if (err) + return err; + + ichx_priv.gpio_base = res_base; + + /* + * If necessary, determine the I/O address of ACPI/power management + * registers which are needed to read the the GPE0 register for GPI pins + * 0 - 15 on some chipsets. + */ + if (!ichx_priv.desc->uses_gpe0) + goto init; + + res_pm = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPE0); + if (!res_pm) { + pr_warn("ACPI BAR is unavailable, GPI 0 - 15 unavailable\n"); + goto init; + } + + if (!devm_request_region(&pdev->dev, res_pm->start, + resource_size(res_pm), pdev->name)) { + pr_warn("ACPI BAR is busy, GPI 0 - 15 unavailable\n"); + goto init; + } + + ichx_priv.pm_base = res_pm; + +init: + ichx_gpiolib_setup(&ichx_priv.chip); + err = gpiochip_add_data(&ichx_priv.chip, NULL); + if (err) { + pr_err("Failed to register GPIOs\n"); + return err; + } + + pr_info("GPIO from %d to %d on %s\n", ichx_priv.chip.base, + ichx_priv.chip.base + ichx_priv.chip.ngpio - 1, DRV_NAME); + + return 0; +} + +static int ichx_gpio_remove(struct platform_device *pdev) +{ + gpiochip_remove(&ichx_priv.chip); + + return 0; +} + +static struct platform_driver ichx_gpio_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = ichx_gpio_probe, + .remove = ichx_gpio_remove, +}; + +module_platform_driver(ichx_gpio_driver); + +MODULE_AUTHOR("Peter Tyser <ptyser@xes-inc.com>"); +MODULE_DESCRIPTION("GPIO interface for Intel ICH series"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:"DRV_NAME); diff --git a/drivers/gpio/gpio-ingenic.c b/drivers/gpio/gpio-ingenic.c new file mode 100644 index 000000000..e738e384a --- /dev/null +++ b/drivers/gpio/gpio-ingenic.c @@ -0,0 +1,392 @@ +/* + * Ingenic JZ47xx GPIO driver + * + * Copyright (c) 2017 Paul Cercueil <paul@crapouillou.net> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/pinctrl/consumer.h> +#include <linux/regmap.h> + +#define GPIO_PIN 0x00 +#define GPIO_MSK 0x20 + +#define JZ4740_GPIO_DATA 0x10 +#define JZ4740_GPIO_SELECT 0x50 +#define JZ4740_GPIO_DIR 0x60 +#define JZ4740_GPIO_TRIG 0x70 +#define JZ4740_GPIO_FLAG 0x80 + +#define JZ4770_GPIO_INT 0x10 +#define JZ4770_GPIO_PAT1 0x30 +#define JZ4770_GPIO_PAT0 0x40 +#define JZ4770_GPIO_FLAG 0x50 + +#define REG_SET(x) ((x) + 0x4) +#define REG_CLEAR(x) ((x) + 0x8) + +enum jz_version { + ID_JZ4740, + ID_JZ4770, + ID_JZ4780, +}; + +struct ingenic_gpio_chip { + struct regmap *map; + struct gpio_chip gc; + struct irq_chip irq_chip; + unsigned int irq, reg_base; + enum jz_version version; +}; + +static u32 gpio_ingenic_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg) +{ + unsigned int val; + + regmap_read(jzgc->map, jzgc->reg_base + reg, &val); + + return (u32) val; +} + +static void gpio_ingenic_set_bit(struct ingenic_gpio_chip *jzgc, + u8 reg, u8 offset, bool set) +{ + if (set) + reg = REG_SET(reg); + else + reg = REG_CLEAR(reg); + + regmap_write(jzgc->map, jzgc->reg_base + reg, BIT(offset)); +} + +static inline bool gpio_get_value(struct ingenic_gpio_chip *jzgc, u8 offset) +{ + unsigned int val = gpio_ingenic_read_reg(jzgc, GPIO_PIN); + + return !!(val & BIT(offset)); +} + +static void gpio_set_value(struct ingenic_gpio_chip *jzgc, u8 offset, int value) +{ + if (jzgc->version >= ID_JZ4770) + gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_PAT0, offset, !!value); + else + gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_DATA, offset, !!value); +} + +static void irq_set_type(struct ingenic_gpio_chip *jzgc, + u8 offset, unsigned int type) +{ + u8 reg1, reg2; + + if (jzgc->version >= ID_JZ4770) { + reg1 = JZ4770_GPIO_PAT1; + reg2 = JZ4770_GPIO_PAT0; + } else { + reg1 = JZ4740_GPIO_TRIG; + reg2 = JZ4740_GPIO_DIR; + } + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + gpio_ingenic_set_bit(jzgc, reg2, offset, true); + gpio_ingenic_set_bit(jzgc, reg1, offset, true); + break; + case IRQ_TYPE_EDGE_FALLING: + gpio_ingenic_set_bit(jzgc, reg2, offset, false); + gpio_ingenic_set_bit(jzgc, reg1, offset, true); + break; + case IRQ_TYPE_LEVEL_HIGH: + gpio_ingenic_set_bit(jzgc, reg2, offset, true); + gpio_ingenic_set_bit(jzgc, reg1, offset, false); + break; + case IRQ_TYPE_LEVEL_LOW: + default: + gpio_ingenic_set_bit(jzgc, reg2, offset, false); + gpio_ingenic_set_bit(jzgc, reg1, offset, false); + break; + } +} + +static void ingenic_gpio_irq_mask(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + + gpio_ingenic_set_bit(jzgc, GPIO_MSK, irqd->hwirq, true); +} + +static void ingenic_gpio_irq_unmask(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + + gpio_ingenic_set_bit(jzgc, GPIO_MSK, irqd->hwirq, false); +} + +static void ingenic_gpio_irq_enable(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + int irq = irqd->hwirq; + + if (jzgc->version >= ID_JZ4770) + gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_INT, irq, true); + else + gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, true); + + ingenic_gpio_irq_unmask(irqd); +} + +static void ingenic_gpio_irq_disable(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + int irq = irqd->hwirq; + + ingenic_gpio_irq_mask(irqd); + + if (jzgc->version >= ID_JZ4770) + gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_INT, irq, false); + else + gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, false); +} + +static void ingenic_gpio_irq_ack(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + int irq = irqd->hwirq; + bool high; + + if (irqd_get_trigger_type(irqd) == IRQ_TYPE_EDGE_BOTH) { + /* + * Switch to an interrupt for the opposite edge to the one that + * triggered the interrupt being ACKed. + */ + high = gpio_get_value(jzgc, irq); + if (high) + irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_FALLING); + else + irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_RISING); + } + + if (jzgc->version >= ID_JZ4770) + gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_FLAG, irq, false); + else + gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_DATA, irq, true); +} + +static int ingenic_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + + switch (type) { + case IRQ_TYPE_EDGE_BOTH: + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_EDGE_FALLING: + irq_set_handler_locked(irqd, handle_edge_irq); + break; + case IRQ_TYPE_LEVEL_HIGH: + case IRQ_TYPE_LEVEL_LOW: + irq_set_handler_locked(irqd, handle_level_irq); + break; + default: + irq_set_handler_locked(irqd, handle_bad_irq); + } + + if (type == IRQ_TYPE_EDGE_BOTH) { + /* + * The hardware does not support interrupts on both edges. The + * best we can do is to set up a single-edge interrupt and then + * switch to the opposing edge when ACKing the interrupt. + */ + bool high = gpio_get_value(jzgc, irqd->hwirq); + + type = high ? IRQ_TYPE_EDGE_FALLING : IRQ_TYPE_EDGE_RISING; + } + + irq_set_type(jzgc, irqd->hwirq, type); + return 0; +} + +static int ingenic_gpio_irq_set_wake(struct irq_data *irqd, unsigned int on) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + + return irq_set_irq_wake(jzgc->irq, on); +} + +static void ingenic_gpio_irq_handler(struct irq_desc *desc) +{ + struct gpio_chip *gc = irq_desc_get_handler_data(desc); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data); + unsigned long flag, i; + + chained_irq_enter(irq_chip, desc); + + if (jzgc->version >= ID_JZ4770) + flag = gpio_ingenic_read_reg(jzgc, JZ4770_GPIO_FLAG); + else + flag = gpio_ingenic_read_reg(jzgc, JZ4740_GPIO_FLAG); + + for_each_set_bit(i, &flag, 32) + generic_handle_irq(irq_linear_revmap(gc->irq.domain, i)); + chained_irq_exit(irq_chip, desc); +} + +static void ingenic_gpio_set(struct gpio_chip *gc, + unsigned int offset, int value) +{ + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + + gpio_set_value(jzgc, offset, value); +} + +static int ingenic_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + + return (int) gpio_get_value(jzgc, offset); +} + +static int ingenic_gpio_direction_input(struct gpio_chip *gc, + unsigned int offset) +{ + return pinctrl_gpio_direction_input(gc->base + offset); +} + +static int ingenic_gpio_direction_output(struct gpio_chip *gc, + unsigned int offset, int value) +{ + ingenic_gpio_set(gc, offset, value); + return pinctrl_gpio_direction_output(gc->base + offset); +} + +static const struct of_device_id ingenic_gpio_of_match[] = { + { .compatible = "ingenic,jz4740-gpio", .data = (void *)ID_JZ4740 }, + { .compatible = "ingenic,jz4770-gpio", .data = (void *)ID_JZ4770 }, + { .compatible = "ingenic,jz4780-gpio", .data = (void *)ID_JZ4780 }, + {}, +}; +MODULE_DEVICE_TABLE(of, ingenic_gpio_of_match); + +static int ingenic_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ingenic_gpio_chip *jzgc; + u32 bank; + int err; + + jzgc = devm_kzalloc(dev, sizeof(*jzgc), GFP_KERNEL); + if (!jzgc) + return -ENOMEM; + + jzgc->map = dev_get_drvdata(dev->parent); + if (!jzgc->map) { + dev_err(dev, "Cannot get parent regmap\n"); + return -ENXIO; + } + + err = of_property_read_u32(dev->of_node, "reg", &bank); + if (err) { + dev_err(dev, "Cannot read \"reg\" property: %i\n", err); + return err; + } + + jzgc->reg_base = bank * 0x100; + + jzgc->gc.label = devm_kasprintf(dev, GFP_KERNEL, "GPIO%c", 'A' + bank); + if (!jzgc->gc.label) + return -ENOMEM; + + /* DO NOT EXPAND THIS: FOR BACKWARD GPIO NUMBERSPACE COMPATIBIBILITY + * ONLY: WORK TO TRANSITION CONSUMERS TO USE THE GPIO DESCRIPTOR API IN + * <linux/gpio/consumer.h> INSTEAD. + */ + jzgc->gc.base = bank * 32; + + jzgc->gc.ngpio = 32; + jzgc->gc.parent = dev; + jzgc->gc.of_node = dev->of_node; + jzgc->gc.owner = THIS_MODULE; + jzgc->version = (enum jz_version)of_device_get_match_data(dev); + + jzgc->gc.set = ingenic_gpio_set; + jzgc->gc.get = ingenic_gpio_get; + jzgc->gc.direction_input = ingenic_gpio_direction_input; + jzgc->gc.direction_output = ingenic_gpio_direction_output; + + if (of_property_read_bool(dev->of_node, "gpio-ranges")) { + jzgc->gc.request = gpiochip_generic_request; + jzgc->gc.free = gpiochip_generic_free; + } + + err = devm_gpiochip_add_data(dev, &jzgc->gc, jzgc); + if (err) + return err; + + jzgc->irq = irq_of_parse_and_map(dev->of_node, 0); + if (!jzgc->irq) + return -EINVAL; + + jzgc->irq_chip.name = jzgc->gc.label; + jzgc->irq_chip.irq_enable = ingenic_gpio_irq_enable; + jzgc->irq_chip.irq_disable = ingenic_gpio_irq_disable; + jzgc->irq_chip.irq_unmask = ingenic_gpio_irq_unmask; + jzgc->irq_chip.irq_mask = ingenic_gpio_irq_mask; + jzgc->irq_chip.irq_ack = ingenic_gpio_irq_ack; + jzgc->irq_chip.irq_set_type = ingenic_gpio_irq_set_type; + jzgc->irq_chip.irq_set_wake = ingenic_gpio_irq_set_wake; + jzgc->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND; + + err = gpiochip_irqchip_add(&jzgc->gc, &jzgc->irq_chip, 0, + handle_level_irq, IRQ_TYPE_NONE); + if (err) + return err; + + gpiochip_set_chained_irqchip(&jzgc->gc, &jzgc->irq_chip, + jzgc->irq, ingenic_gpio_irq_handler); + return 0; +} + +static int ingenic_gpio_remove(struct platform_device *pdev) +{ + return 0; +} + +static struct platform_driver ingenic_gpio_driver = { + .driver = { + .name = "gpio-ingenic", + .of_match_table = of_match_ptr(ingenic_gpio_of_match), + }, + .probe = ingenic_gpio_probe, + .remove = ingenic_gpio_remove, +}; + +static int __init ingenic_gpio_drv_register(void) +{ + return platform_driver_register(&ingenic_gpio_driver); +} +subsys_initcall(ingenic_gpio_drv_register); + +static void __exit ingenic_gpio_drv_unregister(void) +{ + platform_driver_unregister(&ingenic_gpio_driver); +} +module_exit(ingenic_gpio_drv_unregister); + +MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>"); +MODULE_DESCRIPTION("Ingenic JZ47xx GPIO driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-intel-mid.c b/drivers/gpio/gpio-intel-mid.c new file mode 100644 index 000000000..028d64c2c --- /dev/null +++ b/drivers/gpio/gpio-intel-mid.c @@ -0,0 +1,422 @@ +/* + * Intel MID GPIO driver + * + * Copyright (c) 2008-2014,2016 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Supports: + * Moorestown platform Langwell chip. + * Medfield platform Penwell chip. + * Clovertrail platform Cloverview chip. + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/gpio/driver.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/stddef.h> + +#define INTEL_MID_IRQ_TYPE_EDGE (1 << 0) +#define INTEL_MID_IRQ_TYPE_LEVEL (1 << 1) + +/* + * Langwell chip has 64 pins and thus there are 2 32bit registers to control + * each feature, while Penwell chip has 96 pins for each block, and need 3 32bit + * registers to control them, so we only define the order here instead of a + * structure, to get a bit offset for a pin (use GPDR as an example): + * + * nreg = ngpio / 32; + * reg = offset / 32; + * bit = offset % 32; + * reg_addr = reg_base + GPDR * nreg * 4 + reg * 4; + * + * so the bit of reg_addr is to control pin offset's GPDR feature +*/ + +enum GPIO_REG { + GPLR = 0, /* pin level read-only */ + GPDR, /* pin direction */ + GPSR, /* pin set */ + GPCR, /* pin clear */ + GRER, /* rising edge detect */ + GFER, /* falling edge detect */ + GEDR, /* edge detect result */ + GAFR, /* alt function */ +}; + +/* intel_mid gpio driver data */ +struct intel_mid_gpio_ddata { + u16 ngpio; /* number of gpio pins */ + u32 chip_irq_type; /* chip interrupt type */ +}; + +struct intel_mid_gpio { + struct gpio_chip chip; + void __iomem *reg_base; + spinlock_t lock; + struct pci_dev *pdev; +}; + +static void __iomem *gpio_reg(struct gpio_chip *chip, unsigned offset, + enum GPIO_REG reg_type) +{ + struct intel_mid_gpio *priv = gpiochip_get_data(chip); + unsigned nreg = chip->ngpio / 32; + u8 reg = offset / 32; + + return priv->reg_base + reg_type * nreg * 4 + reg * 4; +} + +static void __iomem *gpio_reg_2bit(struct gpio_chip *chip, unsigned offset, + enum GPIO_REG reg_type) +{ + struct intel_mid_gpio *priv = gpiochip_get_data(chip); + unsigned nreg = chip->ngpio / 32; + u8 reg = offset / 16; + + return priv->reg_base + reg_type * nreg * 4 + reg * 4; +} + +static int intel_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + void __iomem *gafr = gpio_reg_2bit(chip, offset, GAFR); + u32 value = readl(gafr); + int shift = (offset % 16) << 1, af = (value >> shift) & 3; + + if (af) { + value &= ~(3 << shift); + writel(value, gafr); + } + return 0; +} + +static int intel_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + void __iomem *gplr = gpio_reg(chip, offset, GPLR); + + return !!(readl(gplr) & BIT(offset % 32)); +} + +static void intel_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + void __iomem *gpsr, *gpcr; + + if (value) { + gpsr = gpio_reg(chip, offset, GPSR); + writel(BIT(offset % 32), gpsr); + } else { + gpcr = gpio_reg(chip, offset, GPCR); + writel(BIT(offset % 32), gpcr); + } +} + +static int intel_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct intel_mid_gpio *priv = gpiochip_get_data(chip); + void __iomem *gpdr = gpio_reg(chip, offset, GPDR); + u32 value; + unsigned long flags; + + if (priv->pdev) + pm_runtime_get(&priv->pdev->dev); + + spin_lock_irqsave(&priv->lock, flags); + value = readl(gpdr); + value &= ~BIT(offset % 32); + writel(value, gpdr); + spin_unlock_irqrestore(&priv->lock, flags); + + if (priv->pdev) + pm_runtime_put(&priv->pdev->dev); + + return 0; +} + +static int intel_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct intel_mid_gpio *priv = gpiochip_get_data(chip); + void __iomem *gpdr = gpio_reg(chip, offset, GPDR); + unsigned long flags; + + intel_gpio_set(chip, offset, value); + + if (priv->pdev) + pm_runtime_get(&priv->pdev->dev); + + spin_lock_irqsave(&priv->lock, flags); + value = readl(gpdr); + value |= BIT(offset % 32); + writel(value, gpdr); + spin_unlock_irqrestore(&priv->lock, flags); + + if (priv->pdev) + pm_runtime_put(&priv->pdev->dev); + + return 0; +} + +static int intel_mid_irq_type(struct irq_data *d, unsigned type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct intel_mid_gpio *priv = gpiochip_get_data(gc); + u32 gpio = irqd_to_hwirq(d); + unsigned long flags; + u32 value; + void __iomem *grer = gpio_reg(&priv->chip, gpio, GRER); + void __iomem *gfer = gpio_reg(&priv->chip, gpio, GFER); + + if (gpio >= priv->chip.ngpio) + return -EINVAL; + + if (priv->pdev) + pm_runtime_get(&priv->pdev->dev); + + spin_lock_irqsave(&priv->lock, flags); + if (type & IRQ_TYPE_EDGE_RISING) + value = readl(grer) | BIT(gpio % 32); + else + value = readl(grer) & (~BIT(gpio % 32)); + writel(value, grer); + + if (type & IRQ_TYPE_EDGE_FALLING) + value = readl(gfer) | BIT(gpio % 32); + else + value = readl(gfer) & (~BIT(gpio % 32)); + writel(value, gfer); + spin_unlock_irqrestore(&priv->lock, flags); + + if (priv->pdev) + pm_runtime_put(&priv->pdev->dev); + + return 0; +} + +static void intel_mid_irq_unmask(struct irq_data *d) +{ +} + +static void intel_mid_irq_mask(struct irq_data *d) +{ +} + +static struct irq_chip intel_mid_irqchip = { + .name = "INTEL_MID-GPIO", + .irq_mask = intel_mid_irq_mask, + .irq_unmask = intel_mid_irq_unmask, + .irq_set_type = intel_mid_irq_type, +}; + +static const struct intel_mid_gpio_ddata gpio_lincroft = { + .ngpio = 64, +}; + +static const struct intel_mid_gpio_ddata gpio_penwell_aon = { + .ngpio = 96, + .chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE, +}; + +static const struct intel_mid_gpio_ddata gpio_penwell_core = { + .ngpio = 96, + .chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE, +}; + +static const struct intel_mid_gpio_ddata gpio_cloverview_aon = { + .ngpio = 96, + .chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE | INTEL_MID_IRQ_TYPE_LEVEL, +}; + +static const struct intel_mid_gpio_ddata gpio_cloverview_core = { + .ngpio = 96, + .chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE, +}; + +static const struct pci_device_id intel_gpio_ids[] = { + { + /* Lincroft */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080f), + .driver_data = (kernel_ulong_t)&gpio_lincroft, + }, + { + /* Penwell AON */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081f), + .driver_data = (kernel_ulong_t)&gpio_penwell_aon, + }, + { + /* Penwell Core */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081a), + .driver_data = (kernel_ulong_t)&gpio_penwell_core, + }, + { + /* Cloverview Aon */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x08eb), + .driver_data = (kernel_ulong_t)&gpio_cloverview_aon, + }, + { + /* Cloverview Core */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x08f7), + .driver_data = (kernel_ulong_t)&gpio_cloverview_core, + }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, intel_gpio_ids); + +static void intel_mid_irq_handler(struct irq_desc *desc) +{ + struct gpio_chip *gc = irq_desc_get_handler_data(desc); + struct intel_mid_gpio *priv = gpiochip_get_data(gc); + struct irq_data *data = irq_desc_get_irq_data(desc); + struct irq_chip *chip = irq_data_get_irq_chip(data); + u32 base, gpio, mask; + unsigned long pending; + void __iomem *gedr; + + /* check GPIO controller to check which pin triggered the interrupt */ + for (base = 0; base < priv->chip.ngpio; base += 32) { + gedr = gpio_reg(&priv->chip, base, GEDR); + while ((pending = readl(gedr))) { + gpio = __ffs(pending); + mask = BIT(gpio); + /* Clear before handling so we can't lose an edge */ + writel(mask, gedr); + generic_handle_irq(irq_find_mapping(gc->irq.domain, + base + gpio)); + } + } + + chip->irq_eoi(data); +} + +static void intel_mid_irq_init_hw(struct intel_mid_gpio *priv) +{ + void __iomem *reg; + unsigned base; + + for (base = 0; base < priv->chip.ngpio; base += 32) { + /* Clear the rising-edge detect register */ + reg = gpio_reg(&priv->chip, base, GRER); + writel(0, reg); + /* Clear the falling-edge detect register */ + reg = gpio_reg(&priv->chip, base, GFER); + writel(0, reg); + /* Clear the edge detect status register */ + reg = gpio_reg(&priv->chip, base, GEDR); + writel(~0, reg); + } +} + +static int __maybe_unused intel_gpio_runtime_idle(struct device *dev) +{ + int err = pm_schedule_suspend(dev, 500); + return err ?: -EBUSY; +} + +static const struct dev_pm_ops intel_gpio_pm_ops = { + SET_RUNTIME_PM_OPS(NULL, NULL, intel_gpio_runtime_idle) +}; + +static int intel_gpio_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + void __iomem *base; + struct intel_mid_gpio *priv; + u32 gpio_base; + u32 irq_base; + int retval; + struct intel_mid_gpio_ddata *ddata = + (struct intel_mid_gpio_ddata *)id->driver_data; + + retval = pcim_enable_device(pdev); + if (retval) + return retval; + + retval = pcim_iomap_regions(pdev, 1 << 0 | 1 << 1, pci_name(pdev)); + if (retval) { + dev_err(&pdev->dev, "I/O memory mapping error\n"); + return retval; + } + + base = pcim_iomap_table(pdev)[1]; + + irq_base = readl(base); + gpio_base = readl(sizeof(u32) + base); + + /* release the IO mapping, since we already get the info from bar1 */ + pcim_iounmap_regions(pdev, 1 << 1); + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->reg_base = pcim_iomap_table(pdev)[0]; + priv->chip.label = dev_name(&pdev->dev); + priv->chip.parent = &pdev->dev; + priv->chip.request = intel_gpio_request; + priv->chip.direction_input = intel_gpio_direction_input; + priv->chip.direction_output = intel_gpio_direction_output; + priv->chip.get = intel_gpio_get; + priv->chip.set = intel_gpio_set; + priv->chip.base = gpio_base; + priv->chip.ngpio = ddata->ngpio; + priv->chip.can_sleep = false; + priv->pdev = pdev; + + spin_lock_init(&priv->lock); + + pci_set_drvdata(pdev, priv); + retval = devm_gpiochip_add_data(&pdev->dev, &priv->chip, priv); + if (retval) { + dev_err(&pdev->dev, "gpiochip_add error %d\n", retval); + return retval; + } + + retval = gpiochip_irqchip_add(&priv->chip, + &intel_mid_irqchip, + irq_base, + handle_simple_irq, + IRQ_TYPE_NONE); + if (retval) { + dev_err(&pdev->dev, + "could not connect irqchip to gpiochip\n"); + return retval; + } + + intel_mid_irq_init_hw(priv); + + gpiochip_set_chained_irqchip(&priv->chip, + &intel_mid_irqchip, + pdev->irq, + intel_mid_irq_handler); + + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_allow(&pdev->dev); + + return 0; +} + +static struct pci_driver intel_gpio_driver = { + .name = "intel_mid_gpio", + .id_table = intel_gpio_ids, + .probe = intel_gpio_probe, + .driver = { + .pm = &intel_gpio_pm_ops, + }, +}; + +builtin_pci_driver(intel_gpio_driver); diff --git a/drivers/gpio/gpio-iop.c b/drivers/gpio/gpio-iop.c new file mode 100644 index 000000000..8d62db447 --- /dev/null +++ b/drivers/gpio/gpio-iop.c @@ -0,0 +1,64 @@ +/* + * arch/arm/plat-iop/gpio.c + * GPIO handling for Intel IOP3xx processors. + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/gpio/driver.h> +#include <linux/platform_device.h> + +#define IOP3XX_GPOE 0x0000 +#define IOP3XX_GPID 0x0004 +#define IOP3XX_GPOD 0x0008 + +static int iop3xx_gpio_probe(struct platform_device *pdev) +{ + struct resource *res; + struct gpio_chip *gc; + void __iomem *base; + int err; + + gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL); + if (!gc) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + err = bgpio_init(gc, &pdev->dev, 1, base + IOP3XX_GPID, + base + IOP3XX_GPOD, NULL, NULL, base + IOP3XX_GPOE, 0); + if (err) + return err; + + gc->base = 0; + gc->owner = THIS_MODULE; + + return devm_gpiochip_add_data(&pdev->dev, gc, NULL); +} + +static struct platform_driver iop3xx_gpio_driver = { + .driver = { + .name = "gpio-iop", + }, + .probe = iop3xx_gpio_probe, +}; + +static int __init iop3xx_gpio_init(void) +{ + return platform_driver_register(&iop3xx_gpio_driver); +} +arch_initcall(iop3xx_gpio_init); + +MODULE_DESCRIPTION("GPIO handling for Intel IOP3xx processors"); +MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-it87.c b/drivers/gpio/gpio-it87.c new file mode 100644 index 000000000..389ecd8b7 --- /dev/null +++ b/drivers/gpio/gpio-it87.c @@ -0,0 +1,432 @@ +/* + * GPIO interface for IT87xx Super I/O chips + * + * Author: Diego Elio Pettenò <flameeyes@flameeyes.eu> + * Copyright (c) 2017 Google, Inc. + * + * Based on it87_wdt.c by Oliver Schuster + * gpio-it8761e.c by Denis Turischev + * gpio-stmpe.c by Rabin Vincent + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/gpio/driver.h> + +/* Chip Id numbers */ +#define NO_DEV_ID 0xffff +#define IT8613_ID 0x8613 +#define IT8620_ID 0x8620 +#define IT8628_ID 0x8628 +#define IT8718_ID 0x8718 +#define IT8728_ID 0x8728 +#define IT8732_ID 0x8732 +#define IT8761_ID 0x8761 +#define IT8772_ID 0x8772 +#define IT8786_ID 0x8786 + +/* IO Ports */ +#define REG 0x2e +#define VAL 0x2f + +/* Logical device Numbers LDN */ +#define GPIO 0x07 + +/* Configuration Registers and Functions */ +#define LDNREG 0x07 +#define CHIPID 0x20 +#define CHIPREV 0x22 + +/** + * struct it87_gpio - it87-specific GPIO chip + * @chip the underlying gpio_chip structure + * @lock a lock to avoid races between operations + * @io_base base address for gpio ports + * @io_size size of the port rage starting from io_base. + * @output_base Super I/O register address for Output Enable register + * @simple_base Super I/O 'Simple I/O' Enable register + * @simple_size Super IO 'Simple I/O' Enable register size; this is + * required because IT87xx chips might only provide Simple I/O + * switches on a subset of lines, whereas the others keep the + * same status all time. + */ +struct it87_gpio { + struct gpio_chip chip; + spinlock_t lock; + u16 io_base; + u16 io_size; + u8 output_base; + u8 simple_base; + u8 simple_size; +}; + +static struct it87_gpio it87_gpio_chip = { + .lock = __SPIN_LOCK_UNLOCKED(it87_gpio_chip.lock), +}; + +/* Superio chip access functions; copied from wdt_it87 */ + +static inline int superio_enter(void) +{ + /* + * Try to reserve REG and REG + 1 for exclusive access. + */ + if (!request_muxed_region(REG, 2, KBUILD_MODNAME)) + return -EBUSY; + + outb(0x87, REG); + outb(0x01, REG); + outb(0x55, REG); + outb(0x55, REG); + return 0; +} + +static inline void superio_exit(void) +{ + outb(0x02, REG); + outb(0x02, VAL); + release_region(REG, 2); +} + +static inline void superio_select(int ldn) +{ + outb(LDNREG, REG); + outb(ldn, VAL); +} + +static inline int superio_inb(int reg) +{ + outb(reg, REG); + return inb(VAL); +} + +static inline void superio_outb(int val, int reg) +{ + outb(reg, REG); + outb(val, VAL); +} + +static inline int superio_inw(int reg) +{ + int val; + + outb(reg++, REG); + val = inb(VAL) << 8; + outb(reg, REG); + val |= inb(VAL); + return val; +} + +static inline void superio_outw(int val, int reg) +{ + outb(reg++, REG); + outb(val >> 8, VAL); + outb(reg, REG); + outb(val, VAL); +} + +static inline void superio_set_mask(int mask, int reg) +{ + u8 curr_val = superio_inb(reg); + u8 new_val = curr_val | mask; + + if (curr_val != new_val) + superio_outb(new_val, reg); +} + +static inline void superio_clear_mask(int mask, int reg) +{ + u8 curr_val = superio_inb(reg); + u8 new_val = curr_val & ~mask; + + if (curr_val != new_val) + superio_outb(new_val, reg); +} + +static int it87_gpio_request(struct gpio_chip *chip, unsigned gpio_num) +{ + u8 mask, group; + int rc = 0; + struct it87_gpio *it87_gpio = gpiochip_get_data(chip); + + mask = 1 << (gpio_num % 8); + group = (gpio_num / 8); + + spin_lock(&it87_gpio->lock); + + rc = superio_enter(); + if (rc) + goto exit; + + /* not all the IT87xx chips support Simple I/O and not all of + * them allow all the lines to be set/unset to Simple I/O. + */ + if (group < it87_gpio->simple_size) + superio_set_mask(mask, group + it87_gpio->simple_base); + + /* clear output enable, setting the pin to input, as all the + * newly-exported GPIO interfaces are set to input. + */ + superio_clear_mask(mask, group + it87_gpio->output_base); + + superio_exit(); + +exit: + spin_unlock(&it87_gpio->lock); + return rc; +} + +static int it87_gpio_get(struct gpio_chip *chip, unsigned gpio_num) +{ + u16 reg; + u8 mask; + struct it87_gpio *it87_gpio = gpiochip_get_data(chip); + + mask = 1 << (gpio_num % 8); + reg = (gpio_num / 8) + it87_gpio->io_base; + + return !!(inb(reg) & mask); +} + +static int it87_gpio_direction_in(struct gpio_chip *chip, unsigned gpio_num) +{ + u8 mask, group; + int rc = 0; + struct it87_gpio *it87_gpio = gpiochip_get_data(chip); + + mask = 1 << (gpio_num % 8); + group = (gpio_num / 8); + + spin_lock(&it87_gpio->lock); + + rc = superio_enter(); + if (rc) + goto exit; + + /* clear the output enable bit */ + superio_clear_mask(mask, group + it87_gpio->output_base); + + superio_exit(); + +exit: + spin_unlock(&it87_gpio->lock); + return rc; +} + +static void it87_gpio_set(struct gpio_chip *chip, + unsigned gpio_num, int val) +{ + u8 mask, curr_vals; + u16 reg; + struct it87_gpio *it87_gpio = gpiochip_get_data(chip); + + mask = 1 << (gpio_num % 8); + reg = (gpio_num / 8) + it87_gpio->io_base; + + curr_vals = inb(reg); + if (val) + outb(curr_vals | mask, reg); + else + outb(curr_vals & ~mask, reg); +} + +static int it87_gpio_direction_out(struct gpio_chip *chip, + unsigned gpio_num, int val) +{ + u8 mask, group; + int rc = 0; + struct it87_gpio *it87_gpio = gpiochip_get_data(chip); + + mask = 1 << (gpio_num % 8); + group = (gpio_num / 8); + + spin_lock(&it87_gpio->lock); + + rc = superio_enter(); + if (rc) + goto exit; + + /* set the output enable bit */ + superio_set_mask(mask, group + it87_gpio->output_base); + + it87_gpio_set(chip, gpio_num, val); + + superio_exit(); + +exit: + spin_unlock(&it87_gpio->lock); + return rc; +} + +static const struct gpio_chip it87_template_chip = { + .label = KBUILD_MODNAME, + .owner = THIS_MODULE, + .request = it87_gpio_request, + .get = it87_gpio_get, + .direction_input = it87_gpio_direction_in, + .set = it87_gpio_set, + .direction_output = it87_gpio_direction_out, + .base = -1 +}; + +static int __init it87_gpio_init(void) +{ + int rc = 0, i; + u16 chip_type; + u8 chip_rev, gpio_ba_reg; + char *labels, **labels_table; + + struct it87_gpio *it87_gpio = &it87_gpio_chip; + + rc = superio_enter(); + if (rc) + return rc; + + chip_type = superio_inw(CHIPID); + chip_rev = superio_inb(CHIPREV) & 0x0f; + superio_exit(); + + it87_gpio->chip = it87_template_chip; + + switch (chip_type) { + case IT8613_ID: + gpio_ba_reg = 0x62; + it87_gpio->io_size = 8; /* it8613 only needs 6, use 8 for alignment */ + it87_gpio->output_base = 0xc8; + it87_gpio->simple_base = 0xc0; + it87_gpio->simple_size = 6; + it87_gpio->chip.ngpio = 64; /* has 48, use 64 for convenient calc */ + break; + case IT8620_ID: + case IT8628_ID: + gpio_ba_reg = 0x62; + it87_gpio->io_size = 11; + it87_gpio->output_base = 0xc8; + it87_gpio->simple_size = 0; + it87_gpio->chip.ngpio = 64; + break; + case IT8718_ID: + case IT8728_ID: + case IT8732_ID: + case IT8772_ID: + case IT8786_ID: + gpio_ba_reg = 0x62; + it87_gpio->io_size = 8; + it87_gpio->output_base = 0xc8; + it87_gpio->simple_base = 0xc0; + it87_gpio->simple_size = 5; + it87_gpio->chip.ngpio = 64; + break; + case IT8761_ID: + gpio_ba_reg = 0x60; + it87_gpio->io_size = 4; + it87_gpio->output_base = 0xf0; + it87_gpio->simple_size = 0; + it87_gpio->chip.ngpio = 16; + break; + case NO_DEV_ID: + pr_err("no device\n"); + return -ENODEV; + default: + pr_err("Unknown Chip found, Chip %04x Revision %x\n", + chip_type, chip_rev); + return -ENODEV; + } + + rc = superio_enter(); + if (rc) + return rc; + + superio_select(GPIO); + + /* fetch GPIO base address */ + it87_gpio->io_base = superio_inw(gpio_ba_reg); + + superio_exit(); + + pr_info("Found Chip IT%04x rev %x. %u GPIO lines starting at %04xh\n", + chip_type, chip_rev, it87_gpio->chip.ngpio, + it87_gpio->io_base); + + if (!request_region(it87_gpio->io_base, it87_gpio->io_size, + KBUILD_MODNAME)) + return -EBUSY; + + /* Set up aliases for the GPIO connection. + * + * ITE documentation for recent chips such as the IT8728F + * refers to the GPIO lines as GPxy, with a coordinates system + * where x is the GPIO group (starting from 1) and y is the + * bit within the group. + * + * By creating these aliases, we make it easier to understand + * to which GPIO pin we're referring to. + */ + labels = kcalloc(it87_gpio->chip.ngpio, sizeof("it87_gpXY"), + GFP_KERNEL); + labels_table = kcalloc(it87_gpio->chip.ngpio, sizeof(const char *), + GFP_KERNEL); + + if (!labels || !labels_table) { + rc = -ENOMEM; + goto labels_free; + } + + for (i = 0; i < it87_gpio->chip.ngpio; i++) { + char *label = &labels[i * sizeof("it87_gpXY")]; + + sprintf(label, "it87_gp%u%u", 1+(i/8), i%8); + labels_table[i] = label; + } + + it87_gpio->chip.names = (const char *const*)labels_table; + + rc = gpiochip_add_data(&it87_gpio->chip, it87_gpio); + if (rc) + goto labels_free; + + return 0; + +labels_free: + kfree(labels_table); + kfree(labels); + release_region(it87_gpio->io_base, it87_gpio->io_size); + return rc; +} + +static void __exit it87_gpio_exit(void) +{ + struct it87_gpio *it87_gpio = &it87_gpio_chip; + + gpiochip_remove(&it87_gpio->chip); + release_region(it87_gpio->io_base, it87_gpio->io_size); + kfree(it87_gpio->chip.names[0]); + kfree(it87_gpio->chip.names); +} + +module_init(it87_gpio_init); +module_exit(it87_gpio_exit); + +MODULE_AUTHOR("Diego Elio Pettenò <flameeyes@flameeyes.eu>"); +MODULE_DESCRIPTION("GPIO interface for IT87xx Super I/O chips"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-janz-ttl.c b/drivers/gpio/gpio-janz-ttl.c new file mode 100644 index 000000000..6b9bf8b7b --- /dev/null +++ b/drivers/gpio/gpio-janz-ttl.c @@ -0,0 +1,207 @@ +/* + * Janz MODULbus VMOD-TTL GPIO Driver + * + * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio/driver.h> +#include <linux/slab.h> +#include <linux/bitops.h> + +#include <linux/mfd/janz.h> + +#define DRV_NAME "janz-ttl" + +#define PORTA_DIRECTION 0x23 +#define PORTB_DIRECTION 0x2B +#define PORTC_DIRECTION 0x06 +#define PORTA_IOCTL 0x24 +#define PORTB_IOCTL 0x2C +#define PORTC_IOCTL 0x07 + +#define MASTER_INT_CTL 0x00 +#define MASTER_CONF_CTL 0x01 + +#define CONF_PAE BIT(2) +#define CONF_PBE BIT(7) +#define CONF_PCE BIT(4) + +struct ttl_control_regs { + __be16 portc; + __be16 portb; + __be16 porta; + __be16 control; +}; + +struct ttl_module { + struct gpio_chip gpio; + + /* base address of registers */ + struct ttl_control_regs __iomem *regs; + + u8 portc_shadow; + u8 portb_shadow; + u8 porta_shadow; + + spinlock_t lock; +}; + +static int ttl_get_value(struct gpio_chip *gpio, unsigned offset) +{ + struct ttl_module *mod = dev_get_drvdata(gpio->parent); + u8 *shadow; + int ret; + + if (offset < 8) { + shadow = &mod->porta_shadow; + } else if (offset < 16) { + shadow = &mod->portb_shadow; + offset -= 8; + } else { + shadow = &mod->portc_shadow; + offset -= 16; + } + + spin_lock(&mod->lock); + ret = *shadow & BIT(offset); + spin_unlock(&mod->lock); + return !!ret; +} + +static void ttl_set_value(struct gpio_chip *gpio, unsigned offset, int value) +{ + struct ttl_module *mod = dev_get_drvdata(gpio->parent); + void __iomem *port; + u8 *shadow; + + if (offset < 8) { + port = &mod->regs->porta; + shadow = &mod->porta_shadow; + } else if (offset < 16) { + port = &mod->regs->portb; + shadow = &mod->portb_shadow; + offset -= 8; + } else { + port = &mod->regs->portc; + shadow = &mod->portc_shadow; + offset -= 16; + } + + spin_lock(&mod->lock); + if (value) + *shadow |= BIT(offset); + else + *shadow &= ~BIT(offset); + + iowrite16be(*shadow, port); + spin_unlock(&mod->lock); +} + +static void ttl_write_reg(struct ttl_module *mod, u8 reg, u16 val) +{ + iowrite16be(reg, &mod->regs->control); + iowrite16be(val, &mod->regs->control); +} + +static void ttl_setup_device(struct ttl_module *mod) +{ + /* reset the device to a known state */ + iowrite16be(0x0000, &mod->regs->control); + iowrite16be(0x0001, &mod->regs->control); + iowrite16be(0x0000, &mod->regs->control); + + /* put all ports in open-drain mode */ + ttl_write_reg(mod, PORTA_IOCTL, 0x00ff); + ttl_write_reg(mod, PORTB_IOCTL, 0x00ff); + ttl_write_reg(mod, PORTC_IOCTL, 0x000f); + + /* set all ports as outputs */ + ttl_write_reg(mod, PORTA_DIRECTION, 0x0000); + ttl_write_reg(mod, PORTB_DIRECTION, 0x0000); + ttl_write_reg(mod, PORTC_DIRECTION, 0x0000); + + /* set all ports to drive zeroes */ + iowrite16be(0x0000, &mod->regs->porta); + iowrite16be(0x0000, &mod->regs->portb); + iowrite16be(0x0000, &mod->regs->portc); + + /* enable all ports */ + ttl_write_reg(mod, MASTER_CONF_CTL, CONF_PAE | CONF_PBE | CONF_PCE); +} + +static int ttl_probe(struct platform_device *pdev) +{ + struct janz_platform_data *pdata; + struct device *dev = &pdev->dev; + struct ttl_module *mod; + struct gpio_chip *gpio; + struct resource *res; + int ret; + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(dev, "no platform data\n"); + return -ENXIO; + } + + mod = devm_kzalloc(dev, sizeof(*mod), GFP_KERNEL); + if (!mod) + return -ENOMEM; + + platform_set_drvdata(pdev, mod); + spin_lock_init(&mod->lock); + + /* get access to the MODULbus registers for this module */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mod->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(mod->regs)) + return PTR_ERR(mod->regs); + + ttl_setup_device(mod); + + /* Initialize the GPIO data structures */ + gpio = &mod->gpio; + gpio->parent = &pdev->dev; + gpio->label = pdev->name; + gpio->get = ttl_get_value; + gpio->set = ttl_set_value; + gpio->owner = THIS_MODULE; + + /* request dynamic allocation */ + gpio->base = -1; + gpio->ngpio = 20; + + ret = devm_gpiochip_add_data(dev, gpio, NULL); + if (ret) { + dev_err(dev, "unable to add GPIO chip\n"); + return ret; + } + + return 0; +} + +static struct platform_driver ttl_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = ttl_probe, +}; + +module_platform_driver(ttl_driver); + +MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>"); +MODULE_DESCRIPTION("Janz MODULbus VMOD-TTL Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:janz-ttl"); diff --git a/drivers/gpio/gpio-kempld.c b/drivers/gpio/gpio-kempld.c new file mode 100644 index 000000000..7bb96f48e --- /dev/null +++ b/drivers/gpio/gpio-kempld.c @@ -0,0 +1,205 @@ +/* + * Kontron PLD GPIO driver + * + * Copyright (c) 2010-2013 Kontron Europe GmbH + * Author: Michael Brunner <michael.brunner@kontron.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/bitops.h> +#include <linux/errno.h> +#include <linux/platform_device.h> +#include <linux/gpio/driver.h> +#include <linux/mfd/kempld.h> + +#define KEMPLD_GPIO_MAX_NUM 16 +#define KEMPLD_GPIO_MASK(x) (BIT((x) % 8)) +#define KEMPLD_GPIO_DIR_NUM(x) (0x40 + (x) / 8) +#define KEMPLD_GPIO_LVL_NUM(x) (0x42 + (x) / 8) +#define KEMPLD_GPIO_EVT_LVL_EDGE 0x46 +#define KEMPLD_GPIO_IEN 0x4A + +struct kempld_gpio_data { + struct gpio_chip chip; + struct kempld_device_data *pld; +}; + +/* + * Set or clear GPIO bit + * kempld_get_mutex must be called prior to calling this function. + */ +static void kempld_gpio_bitop(struct kempld_device_data *pld, + u8 reg, u8 bit, u8 val) +{ + u8 status; + + status = kempld_read8(pld, reg); + if (val) + status |= KEMPLD_GPIO_MASK(bit); + else + status &= ~KEMPLD_GPIO_MASK(bit); + kempld_write8(pld, reg, status); +} + +static int kempld_gpio_get_bit(struct kempld_device_data *pld, u8 reg, u8 bit) +{ + u8 status; + + kempld_get_mutex(pld); + status = kempld_read8(pld, reg); + kempld_release_mutex(pld); + + return !!(status & KEMPLD_GPIO_MASK(bit)); +} + +static int kempld_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct kempld_gpio_data *gpio = gpiochip_get_data(chip); + struct kempld_device_data *pld = gpio->pld; + + return !!kempld_gpio_get_bit(pld, KEMPLD_GPIO_LVL_NUM(offset), offset); +} + +static void kempld_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct kempld_gpio_data *gpio = gpiochip_get_data(chip); + struct kempld_device_data *pld = gpio->pld; + + kempld_get_mutex(pld); + kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset), offset, value); + kempld_release_mutex(pld); +} + +static int kempld_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct kempld_gpio_data *gpio = gpiochip_get_data(chip); + struct kempld_device_data *pld = gpio->pld; + + kempld_get_mutex(pld); + kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset), offset, 0); + kempld_release_mutex(pld); + + return 0; +} + +static int kempld_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct kempld_gpio_data *gpio = gpiochip_get_data(chip); + struct kempld_device_data *pld = gpio->pld; + + kempld_get_mutex(pld); + kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset), offset, value); + kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset), offset, 1); + kempld_release_mutex(pld); + + return 0; +} + +static int kempld_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct kempld_gpio_data *gpio = gpiochip_get_data(chip); + struct kempld_device_data *pld = gpio->pld; + + return !kempld_gpio_get_bit(pld, KEMPLD_GPIO_DIR_NUM(offset), offset); +} + +static int kempld_gpio_pincount(struct kempld_device_data *pld) +{ + u16 evt, evt_back; + + kempld_get_mutex(pld); + + /* Backup event register as it might be already initialized */ + evt_back = kempld_read16(pld, KEMPLD_GPIO_EVT_LVL_EDGE); + /* Clear event register */ + kempld_write16(pld, KEMPLD_GPIO_EVT_LVL_EDGE, 0x0000); + /* Read back event register */ + evt = kempld_read16(pld, KEMPLD_GPIO_EVT_LVL_EDGE); + /* Restore event register */ + kempld_write16(pld, KEMPLD_GPIO_EVT_LVL_EDGE, evt_back); + + kempld_release_mutex(pld); + + return evt ? __ffs(evt) : 16; +} + +static int kempld_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct kempld_device_data *pld = dev_get_drvdata(dev->parent); + struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); + struct kempld_gpio_data *gpio; + struct gpio_chip *chip; + int ret; + + if (pld->info.spec_major < 2) { + dev_err(dev, + "Driver only supports GPIO devices compatible to PLD spec. rev. 2.0 or higher\n"); + return -ENODEV; + } + + gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + gpio->pld = pld; + + platform_set_drvdata(pdev, gpio); + + chip = &gpio->chip; + chip->label = "gpio-kempld"; + chip->owner = THIS_MODULE; + chip->parent = dev; + chip->can_sleep = true; + if (pdata && pdata->gpio_base) + chip->base = pdata->gpio_base; + else + chip->base = -1; + chip->direction_input = kempld_gpio_direction_input; + chip->direction_output = kempld_gpio_direction_output; + chip->get_direction = kempld_gpio_get_direction; + chip->get = kempld_gpio_get; + chip->set = kempld_gpio_set; + chip->ngpio = kempld_gpio_pincount(pld); + if (chip->ngpio == 0) { + dev_err(dev, "No GPIO pins detected\n"); + return -ENODEV; + } + + ret = devm_gpiochip_add_data(dev, chip, gpio); + if (ret) { + dev_err(dev, "Could not register GPIO chip\n"); + return ret; + } + + dev_info(dev, "GPIO functionality initialized with %d pins\n", + chip->ngpio); + + return 0; +} + +static struct platform_driver kempld_gpio_driver = { + .driver = { + .name = "kempld-gpio", + }, + .probe = kempld_gpio_probe, +}; + +module_platform_driver(kempld_gpio_driver); + +MODULE_DESCRIPTION("KEM PLD GPIO Driver"); +MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:kempld-gpio"); diff --git a/drivers/gpio/gpio-ks8695.c b/drivers/gpio/gpio-ks8695.c new file mode 100644 index 000000000..55d562e12 --- /dev/null +++ b/drivers/gpio/gpio-ks8695.c @@ -0,0 +1,305 @@ +/* + * arch/arm/mach-ks8695/gpio.c + * + * Copyright (C) 2006 Andrew Victor + * Updated to GPIOLIB, Copyright 2008 Simtec Electronics + * Daniel Silverstone <dsilvers@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/gpio/driver.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/module.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <asm/mach/irq.h> + +#include <mach/regs-gpio.h> +#include <mach/gpio-ks8695.h> + +/* + * Configure a GPIO line for either GPIO function, or its internal + * function (Interrupt, Timer, etc). + */ +static void ks8695_gpio_mode(unsigned int pin, short gpio) +{ + unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN }; + unsigned long x, flags; + + if (pin > KS8695_GPIO_5) /* only GPIO 0..5 have internal functions */ + return; + + local_irq_save(flags); + + x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC); + if (gpio) /* GPIO: set bit to 0 */ + x &= ~enable[pin]; + else /* Internal function: set bit to 1 */ + x |= enable[pin]; + __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPC); + + local_irq_restore(flags); +} + + +static unsigned short gpio_irq[] = { KS8695_IRQ_EXTERN0, KS8695_IRQ_EXTERN1, KS8695_IRQ_EXTERN2, KS8695_IRQ_EXTERN3 }; + +/* + * Configure GPIO pin as external interrupt source. + */ +int ks8695_gpio_interrupt(unsigned int pin, unsigned int type) +{ + unsigned long x, flags; + + if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */ + return -EINVAL; + + local_irq_save(flags); + + /* set pin as input */ + x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); + x &= ~IOPM(pin); + __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM); + + local_irq_restore(flags); + + /* Set IRQ triggering type */ + irq_set_irq_type(gpio_irq[pin], type); + + /* enable interrupt mode */ + ks8695_gpio_mode(pin, 0); + + return 0; +} +EXPORT_SYMBOL(ks8695_gpio_interrupt); + + + +/* .... Generic GPIO interface .............................................. */ + +/* + * Configure the GPIO line as an input. + */ +static int ks8695_gpio_direction_input(struct gpio_chip *gc, unsigned int pin) +{ + unsigned long x, flags; + + if (pin > KS8695_GPIO_15) + return -EINVAL; + + /* set pin to GPIO mode */ + ks8695_gpio_mode(pin, 1); + + local_irq_save(flags); + + /* set pin as input */ + x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); + x &= ~IOPM(pin); + __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM); + + local_irq_restore(flags); + + return 0; +} + + +/* + * Configure the GPIO line as an output, with default state. + */ +static int ks8695_gpio_direction_output(struct gpio_chip *gc, + unsigned int pin, int state) +{ + unsigned long x, flags; + + if (pin > KS8695_GPIO_15) + return -EINVAL; + + /* set pin to GPIO mode */ + ks8695_gpio_mode(pin, 1); + + local_irq_save(flags); + + /* set line state */ + x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); + if (state) + x |= IOPD(pin); + else + x &= ~IOPD(pin); + __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD); + + /* set pin as output */ + x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); + x |= IOPM(pin); + __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM); + + local_irq_restore(flags); + + return 0; +} + + +/* + * Set the state of an output GPIO line. + */ +static void ks8695_gpio_set_value(struct gpio_chip *gc, + unsigned int pin, int state) +{ + unsigned long x, flags; + + if (pin > KS8695_GPIO_15) + return; + + local_irq_save(flags); + + /* set output line state */ + x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); + if (state) + x |= IOPD(pin); + else + x &= ~IOPD(pin); + __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD); + + local_irq_restore(flags); +} + + +/* + * Read the state of a GPIO line. + */ +static int ks8695_gpio_get_value(struct gpio_chip *gc, unsigned int pin) +{ + unsigned long x; + + if (pin > KS8695_GPIO_15) + return -EINVAL; + + x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); + return (x & IOPD(pin)) != 0; +} + + +/* + * Map GPIO line to IRQ number. + */ +static int ks8695_gpio_to_irq(struct gpio_chip *gc, unsigned int pin) +{ + if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */ + return -EINVAL; + + return gpio_irq[pin]; +} + +/* GPIOLIB interface */ + +static struct gpio_chip ks8695_gpio_chip = { + .label = "KS8695", + .direction_input = ks8695_gpio_direction_input, + .direction_output = ks8695_gpio_direction_output, + .get = ks8695_gpio_get_value, + .set = ks8695_gpio_set_value, + .to_irq = ks8695_gpio_to_irq, + .base = 0, + .ngpio = 16, + .can_sleep = false, +}; + +/* Register the GPIOs */ +void ks8695_register_gpios(void) +{ + if (gpiochip_add_data(&ks8695_gpio_chip, NULL)) + printk(KERN_ERR "Unable to register core GPIOs\n"); +} + +/* .... Debug interface ..................................................... */ + +#ifdef CONFIG_DEBUG_FS + +static int ks8695_gpio_show(struct seq_file *s, void *unused) +{ + unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN }; + unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM }; + unsigned long mode, ctrl, data; + int i; + + mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); + ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC); + data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); + + seq_printf(s, "Pin\tI/O\tFunction\tState\n\n"); + + for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) { + seq_printf(s, "%i:\t", i); + + seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input"); + + if (i <= KS8695_GPIO_3) { + if (ctrl & enable[i]) { + seq_printf(s, "EXT%i ", i); + + switch ((ctrl & intmask[i]) >> (4 * i)) { + case IOPC_TM_LOW: + seq_printf(s, "(Low)"); break; + case IOPC_TM_HIGH: + seq_printf(s, "(High)"); break; + case IOPC_TM_RISING: + seq_printf(s, "(Rising)"); break; + case IOPC_TM_FALLING: + seq_printf(s, "(Falling)"); break; + case IOPC_TM_EDGE: + seq_printf(s, "(Edges)"); break; + } + } else + seq_printf(s, "GPIO\t"); + } else if (i <= KS8695_GPIO_5) { + if (ctrl & enable[i]) + seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4); + else + seq_printf(s, "GPIO\t"); + } else { + seq_printf(s, "GPIO\t"); + } + + seq_printf(s, "\t"); + + seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0); + } + return 0; +} + +static int ks8695_gpio_open(struct inode *inode, struct file *file) +{ + return single_open(file, ks8695_gpio_show, NULL); +} + +static const struct file_operations ks8695_gpio_operations = { + .open = ks8695_gpio_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init ks8695_gpio_debugfs_init(void) +{ + /* /sys/kernel/debug/ks8695_gpio */ + (void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations); + return 0; +} +postcore_initcall(ks8695_gpio_debugfs_init); + +#endif diff --git a/drivers/gpio/gpio-loongson.c b/drivers/gpio/gpio-loongson.c new file mode 100644 index 000000000..16cfbe9e7 --- /dev/null +++ b/drivers/gpio/gpio-loongson.c @@ -0,0 +1,139 @@ +/* + * Loongson-2F/3A/3B GPIO Support + * + * Copyright (c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com> + * Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com> + * Copyright (c) 2013 Hongbing Hu <huhb@lemote.com> + * Copyright (c) 2014 Huacai Chen <chenhc@lemote.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/platform_device.h> +#include <linux/bitops.h> +#include <asm/types.h> +#include <loongson.h> + +#define STLS2F_N_GPIO 4 +#define STLS3A_N_GPIO 16 + +#ifdef CONFIG_CPU_LOONGSON3 +#define LOONGSON_N_GPIO STLS3A_N_GPIO +#else +#define LOONGSON_N_GPIO STLS2F_N_GPIO +#endif + +/* + * Offset into the register where we read lines, we write them from offset 0. + * This offset is the only thing that stand between us and using + * GPIO_GENERIC. + */ +#define LOONGSON_GPIO_IN_OFFSET 16 + +static DEFINE_SPINLOCK(gpio_lock); + +static int loongson_gpio_get_value(struct gpio_chip *chip, unsigned gpio) +{ + u32 val; + + spin_lock(&gpio_lock); + val = LOONGSON_GPIODATA; + spin_unlock(&gpio_lock); + + return !!(val & BIT(gpio + LOONGSON_GPIO_IN_OFFSET)); +} + +static void loongson_gpio_set_value(struct gpio_chip *chip, + unsigned gpio, int value) +{ + u32 val; + + spin_lock(&gpio_lock); + val = LOONGSON_GPIODATA; + if (value) + val |= BIT(gpio); + else + val &= ~BIT(gpio); + LOONGSON_GPIODATA = val; + spin_unlock(&gpio_lock); +} + +static int loongson_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + u32 temp; + + spin_lock(&gpio_lock); + temp = LOONGSON_GPIOIE; + temp |= BIT(gpio); + LOONGSON_GPIOIE = temp; + spin_unlock(&gpio_lock); + + return 0; +} + +static int loongson_gpio_direction_output(struct gpio_chip *chip, + unsigned gpio, int level) +{ + u32 temp; + + loongson_gpio_set_value(chip, gpio, level); + spin_lock(&gpio_lock); + temp = LOONGSON_GPIOIE; + temp &= ~BIT(gpio); + LOONGSON_GPIOIE = temp; + spin_unlock(&gpio_lock); + + return 0; +} + +static int loongson_gpio_probe(struct platform_device *pdev) +{ + struct gpio_chip *gc; + struct device *dev = &pdev->dev; + + gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL); + if (!gc) + return -ENOMEM; + + gc->label = "loongson-gpio-chip"; + gc->base = 0; + gc->ngpio = LOONGSON_N_GPIO; + gc->get = loongson_gpio_get_value; + gc->set = loongson_gpio_set_value; + gc->direction_input = loongson_gpio_direction_input; + gc->direction_output = loongson_gpio_direction_output; + + return gpiochip_add_data(gc, NULL); +} + +static struct platform_driver loongson_gpio_driver = { + .driver = { + .name = "loongson-gpio", + }, + .probe = loongson_gpio_probe, +}; + +static int __init loongson_gpio_setup(void) +{ + struct platform_device *pdev; + int ret; + + ret = platform_driver_register(&loongson_gpio_driver); + if (ret) { + pr_err("error registering loongson GPIO driver\n"); + return ret; + } + + pdev = platform_device_register_simple("loongson-gpio", -1, NULL, 0); + return PTR_ERR_OR_ZERO(pdev); +} +postcore_initcall(loongson_gpio_setup); diff --git a/drivers/gpio/gpio-loongson1.c b/drivers/gpio/gpio-loongson1.c new file mode 100644 index 000000000..fca84ccac --- /dev/null +++ b/drivers/gpio/gpio-loongson1.c @@ -0,0 +1,97 @@ +/* + * GPIO Driver for Loongson 1 SoC + * + * Copyright (C) 2015-2016 Zhang, Keguang <keguang.zhang@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/module.h> +#include <linux/gpio/driver.h> +#include <linux/platform_device.h> +#include <linux/bitops.h> + +/* Loongson 1 GPIO Register Definitions */ +#define GPIO_CFG 0x0 +#define GPIO_DIR 0x10 +#define GPIO_DATA 0x20 +#define GPIO_OUTPUT 0x30 + +static void __iomem *gpio_reg_base; + +static int ls1x_gpio_request(struct gpio_chip *gc, unsigned int offset) +{ + unsigned long flags; + + spin_lock_irqsave(&gc->bgpio_lock, flags); + __raw_writel(__raw_readl(gpio_reg_base + GPIO_CFG) | BIT(offset), + gpio_reg_base + GPIO_CFG); + spin_unlock_irqrestore(&gc->bgpio_lock, flags); + + return 0; +} + +static void ls1x_gpio_free(struct gpio_chip *gc, unsigned int offset) +{ + unsigned long flags; + + spin_lock_irqsave(&gc->bgpio_lock, flags); + __raw_writel(__raw_readl(gpio_reg_base + GPIO_CFG) & ~BIT(offset), + gpio_reg_base + GPIO_CFG); + spin_unlock_irqrestore(&gc->bgpio_lock, flags); +} + +static int ls1x_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct gpio_chip *gc; + struct resource *res; + int ret; + + gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL); + if (!gc) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gpio_reg_base = devm_ioremap_resource(dev, res); + if (IS_ERR(gpio_reg_base)) + return PTR_ERR(gpio_reg_base); + + ret = bgpio_init(gc, dev, 4, gpio_reg_base + GPIO_DATA, + gpio_reg_base + GPIO_OUTPUT, NULL, + NULL, gpio_reg_base + GPIO_DIR, 0); + if (ret) + goto err; + + gc->owner = THIS_MODULE; + gc->request = ls1x_gpio_request; + gc->free = ls1x_gpio_free; + gc->base = pdev->id * 32; + + ret = devm_gpiochip_add_data(dev, gc, NULL); + if (ret) + goto err; + + platform_set_drvdata(pdev, gc); + dev_info(dev, "Loongson1 GPIO driver registered\n"); + + return 0; +err: + dev_err(dev, "failed to register GPIO device\n"); + return ret; +} + +static struct platform_driver ls1x_gpio_driver = { + .probe = ls1x_gpio_probe, + .driver = { + .name = "ls1x-gpio", + }, +}; + +module_platform_driver(ls1x_gpio_driver); + +MODULE_AUTHOR("Kelvin Cheung <keguang.zhang@gmail.com>"); +MODULE_DESCRIPTION("Loongson1 GPIO driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-lp3943.c b/drivers/gpio/gpio-lp3943.c new file mode 100644 index 000000000..c3a3b9b7b --- /dev/null +++ b/drivers/gpio/gpio-lp3943.c @@ -0,0 +1,229 @@ +/* + * TI/National Semiconductor LP3943 GPIO driver + * + * Copyright 2013 Texas Instruments + * + * Author: Milo Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + */ + +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/i2c.h> +#include <linux/mfd/lp3943.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +enum lp3943_gpios { + LP3943_GPIO1, + LP3943_GPIO2, + LP3943_GPIO3, + LP3943_GPIO4, + LP3943_GPIO5, + LP3943_GPIO6, + LP3943_GPIO7, + LP3943_GPIO8, + LP3943_GPIO9, + LP3943_GPIO10, + LP3943_GPIO11, + LP3943_GPIO12, + LP3943_GPIO13, + LP3943_GPIO14, + LP3943_GPIO15, + LP3943_GPIO16, + LP3943_MAX_GPIO, +}; + +struct lp3943_gpio { + struct gpio_chip chip; + struct lp3943 *lp3943; + u16 input_mask; /* 1 = GPIO is input direction, 0 = output */ +}; + +static int lp3943_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); + struct lp3943 *lp3943 = lp3943_gpio->lp3943; + + /* Return an error if the pin is already assigned */ + if (test_and_set_bit(offset, &lp3943->pin_used)) + return -EBUSY; + + return 0; +} + +static void lp3943_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); + struct lp3943 *lp3943 = lp3943_gpio->lp3943; + + clear_bit(offset, &lp3943->pin_used); +} + +static int lp3943_gpio_set_mode(struct lp3943_gpio *lp3943_gpio, u8 offset, + u8 val) +{ + struct lp3943 *lp3943 = lp3943_gpio->lp3943; + const struct lp3943_reg_cfg *mux = lp3943->mux_cfg; + + return lp3943_update_bits(lp3943, mux[offset].reg, mux[offset].mask, + val << mux[offset].shift); +} + +static int lp3943_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); + + lp3943_gpio->input_mask |= BIT(offset); + + return lp3943_gpio_set_mode(lp3943_gpio, offset, LP3943_GPIO_IN); +} + +static int lp3943_get_gpio_in_status(struct lp3943_gpio *lp3943_gpio, + struct gpio_chip *chip, unsigned offset) +{ + u8 addr, read; + int err; + + switch (offset) { + case LP3943_GPIO1 ... LP3943_GPIO8: + addr = LP3943_REG_GPIO_A; + break; + case LP3943_GPIO9 ... LP3943_GPIO16: + addr = LP3943_REG_GPIO_B; + offset = offset - 8; + break; + default: + return -EINVAL; + } + + err = lp3943_read_byte(lp3943_gpio->lp3943, addr, &read); + if (err) + return err; + + return !!(read & BIT(offset)); +} + +static int lp3943_get_gpio_out_status(struct lp3943_gpio *lp3943_gpio, + struct gpio_chip *chip, unsigned offset) +{ + struct lp3943 *lp3943 = lp3943_gpio->lp3943; + const struct lp3943_reg_cfg *mux = lp3943->mux_cfg; + u8 read; + int err; + + err = lp3943_read_byte(lp3943, mux[offset].reg, &read); + if (err) + return err; + + read = (read & mux[offset].mask) >> mux[offset].shift; + + if (read == LP3943_GPIO_OUT_HIGH) + return 1; + else if (read == LP3943_GPIO_OUT_LOW) + return 0; + else + return -EINVAL; +} + +static int lp3943_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); + + /* + * Limitation: + * LP3943 doesn't have the GPIO direction register. It provides + * only input and output status registers. + * So, direction info is required to handle the 'get' operation. + * This variable is updated whenever the direction is changed and + * it is used here. + */ + + if (lp3943_gpio->input_mask & BIT(offset)) + return lp3943_get_gpio_in_status(lp3943_gpio, chip, offset); + else + return lp3943_get_gpio_out_status(lp3943_gpio, chip, offset); +} + +static void lp3943_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); + u8 data; + + if (value) + data = LP3943_GPIO_OUT_HIGH; + else + data = LP3943_GPIO_OUT_LOW; + + lp3943_gpio_set_mode(lp3943_gpio, offset, data); +} + +static int lp3943_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); + + lp3943_gpio_set(chip, offset, value); + lp3943_gpio->input_mask &= ~BIT(offset); + + return 0; +} + +static const struct gpio_chip lp3943_gpio_chip = { + .label = "lp3943", + .owner = THIS_MODULE, + .request = lp3943_gpio_request, + .free = lp3943_gpio_free, + .direction_input = lp3943_gpio_direction_input, + .get = lp3943_gpio_get, + .direction_output = lp3943_gpio_direction_output, + .set = lp3943_gpio_set, + .base = -1, + .ngpio = LP3943_MAX_GPIO, + .can_sleep = 1, +}; + +static int lp3943_gpio_probe(struct platform_device *pdev) +{ + struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent); + struct lp3943_gpio *lp3943_gpio; + + lp3943_gpio = devm_kzalloc(&pdev->dev, sizeof(*lp3943_gpio), + GFP_KERNEL); + if (!lp3943_gpio) + return -ENOMEM; + + lp3943_gpio->lp3943 = lp3943; + lp3943_gpio->chip = lp3943_gpio_chip; + lp3943_gpio->chip.parent = &pdev->dev; + + platform_set_drvdata(pdev, lp3943_gpio); + + return devm_gpiochip_add_data(&pdev->dev, &lp3943_gpio->chip, + lp3943_gpio); +} + +static const struct of_device_id lp3943_gpio_of_match[] = { + { .compatible = "ti,lp3943-gpio", }, + { } +}; +MODULE_DEVICE_TABLE(of, lp3943_gpio_of_match); + +static struct platform_driver lp3943_gpio_driver = { + .probe = lp3943_gpio_probe, + .driver = { + .name = "lp3943-gpio", + .of_match_table = lp3943_gpio_of_match, + }, +}; +module_platform_driver(lp3943_gpio_driver); + +MODULE_DESCRIPTION("LP3943 GPIO driver"); +MODULE_ALIAS("platform:lp3943-gpio"); +MODULE_AUTHOR("Milo Kim"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-lp873x.c b/drivers/gpio/gpio-lp873x.c new file mode 100644 index 000000000..801995dd9 --- /dev/null +++ b/drivers/gpio/gpio-lp873x.c @@ -0,0 +1,183 @@ +/* + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Keerthy <j-keerthy@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + * + * Based on the TPS65218 driver + */ + +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include <linux/mfd/lp873x.h> + +#define BITS_PER_GPO 0x4 +#define LP873X_GPO_CTRL_OD 0x2 + +struct lp873x_gpio { + struct gpio_chip chip; + struct lp873x *lp873; +}; + +static int lp873x_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + /* This device is output only */ + return 0; +} + +static int lp873x_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + /* This device is output only */ + return -EINVAL; +} + +static int lp873x_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct lp873x_gpio *gpio = gpiochip_get_data(chip); + + /* Set the initial value */ + return regmap_update_bits(gpio->lp873->regmap, LP873X_REG_GPO_CTRL, + BIT(offset * BITS_PER_GPO), + value ? BIT(offset * BITS_PER_GPO) : 0); +} + +static int lp873x_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct lp873x_gpio *gpio = gpiochip_get_data(chip); + int ret, val; + + ret = regmap_read(gpio->lp873->regmap, LP873X_REG_GPO_CTRL, &val); + if (ret < 0) + return ret; + + return val & BIT(offset * BITS_PER_GPO); +} + +static void lp873x_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct lp873x_gpio *gpio = gpiochip_get_data(chip); + + regmap_update_bits(gpio->lp873->regmap, LP873X_REG_GPO_CTRL, + BIT(offset * BITS_PER_GPO), + value ? BIT(offset * BITS_PER_GPO) : 0); +} + +static int lp873x_gpio_request(struct gpio_chip *gc, unsigned int offset) +{ + struct lp873x_gpio *gpio = gpiochip_get_data(gc); + int ret; + + switch (offset) { + case 0: + /* No MUX Set up Needed for GPO */ + break; + case 1: + /* Setup the CLKIN_PIN_SEL MUX to GPO2 */ + ret = regmap_update_bits(gpio->lp873->regmap, LP873X_REG_CONFIG, + LP873X_CONFIG_CLKIN_PIN_SEL, 0); + if (ret) + return ret; + + break; + default: + return -EINVAL; + } + + return 0; +} + +static int lp873x_gpio_set_config(struct gpio_chip *gc, unsigned offset, + unsigned long config) +{ + struct lp873x_gpio *gpio = gpiochip_get_data(gc); + + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + return regmap_update_bits(gpio->lp873->regmap, + LP873X_REG_GPO_CTRL, + BIT(offset * BITS_PER_GPO + + LP873X_GPO_CTRL_OD), + BIT(offset * BITS_PER_GPO + + LP873X_GPO_CTRL_OD)); + + case PIN_CONFIG_DRIVE_PUSH_PULL: + return regmap_update_bits(gpio->lp873->regmap, + LP873X_REG_GPO_CTRL, + BIT(offset * BITS_PER_GPO + + LP873X_GPO_CTRL_OD), 0); + default: + return -ENOTSUPP; + } +} + +static const struct gpio_chip template_chip = { + .label = "lp873x-gpio", + .owner = THIS_MODULE, + .request = lp873x_gpio_request, + .get_direction = lp873x_gpio_get_direction, + .direction_input = lp873x_gpio_direction_input, + .direction_output = lp873x_gpio_direction_output, + .get = lp873x_gpio_get, + .set = lp873x_gpio_set, + .set_config = lp873x_gpio_set_config, + .base = -1, + .ngpio = 2, + .can_sleep = true, +}; + +static int lp873x_gpio_probe(struct platform_device *pdev) +{ + struct lp873x_gpio *gpio; + int ret; + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + platform_set_drvdata(pdev, gpio); + + gpio->lp873 = dev_get_drvdata(pdev->dev.parent); + gpio->chip = template_chip; + gpio->chip.parent = gpio->lp873->dev; + + ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + return 0; +} + +static const struct platform_device_id lp873x_gpio_id_table[] = { + { "lp873x-gpio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, lp873x_gpio_id_table); + +static struct platform_driver lp873x_gpio_driver = { + .driver = { + .name = "lp873x-gpio", + }, + .probe = lp873x_gpio_probe, + .id_table = lp873x_gpio_id_table, +}; +module_platform_driver(lp873x_gpio_driver); + +MODULE_AUTHOR("Keerthy <j-keerthy@ti.com>"); +MODULE_DESCRIPTION("LP873X GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-lp87565.c b/drivers/gpio/gpio-lp87565.c new file mode 100644 index 000000000..a121c8f10 --- /dev/null +++ b/drivers/gpio/gpio-lp87565.c @@ -0,0 +1,192 @@ +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Keerthy <j-keerthy@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + * + * Based on the LP873X driver + */ + +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include <linux/mfd/lp87565.h> + +struct lp87565_gpio { + struct gpio_chip chip; + struct regmap *map; +}; + +static int lp87565_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct lp87565_gpio *gpio = gpiochip_get_data(chip); + int ret, val; + + ret = regmap_read(gpio->map, LP87565_REG_GPIO_IN, &val); + if (ret < 0) + return ret; + + return !!(val & BIT(offset)); +} + +static void lp87565_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct lp87565_gpio *gpio = gpiochip_get_data(chip); + + regmap_update_bits(gpio->map, LP87565_REG_GPIO_OUT, + BIT(offset), value ? BIT(offset) : 0); +} + +static int lp87565_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct lp87565_gpio *gpio = gpiochip_get_data(chip); + int ret, val; + + ret = regmap_read(gpio->map, LP87565_REG_GPIO_CONFIG, &val); + if (ret < 0) + return ret; + + return !(val & BIT(offset)); +} + +static int lp87565_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct lp87565_gpio *gpio = gpiochip_get_data(chip); + + return regmap_update_bits(gpio->map, + LP87565_REG_GPIO_CONFIG, + BIT(offset), 0); +} + +static int lp87565_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct lp87565_gpio *gpio = gpiochip_get_data(chip); + + lp87565_gpio_set(chip, offset, value); + + return regmap_update_bits(gpio->map, + LP87565_REG_GPIO_CONFIG, + BIT(offset), BIT(offset)); +} + +static int lp87565_gpio_request(struct gpio_chip *gc, unsigned int offset) +{ + struct lp87565_gpio *gpio = gpiochip_get_data(gc); + int ret; + + switch (offset) { + case 0: + case 1: + case 2: + /* + * MUX can program the pin to be in EN1/2/3 pin mode + * Or GPIO1/2/3 mode. + * Setup the GPIO*_SEL MUX to GPIO mode + */ + ret = regmap_update_bits(gpio->map, + LP87565_REG_PIN_FUNCTION, + BIT(offset), BIT(offset)); + if (ret) + return ret; + + break; + default: + return -EINVAL; + } + + return 0; +} + +static int lp87565_gpio_set_config(struct gpio_chip *gc, unsigned int offset, + unsigned long config) +{ + struct lp87565_gpio *gpio = gpiochip_get_data(gc); + + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + return regmap_update_bits(gpio->map, + LP87565_REG_GPIO_CONFIG, + BIT(offset + + __ffs(LP87565_GOIO1_OD)), + BIT(offset + + __ffs(LP87565_GOIO1_OD))); + case PIN_CONFIG_DRIVE_PUSH_PULL: + return regmap_update_bits(gpio->map, + LP87565_REG_GPIO_CONFIG, + BIT(offset + + __ffs(LP87565_GOIO1_OD)), 0); + default: + return -ENOTSUPP; + } +} + +static const struct gpio_chip template_chip = { + .label = "lp87565-gpio", + .owner = THIS_MODULE, + .request = lp87565_gpio_request, + .get_direction = lp87565_gpio_get_direction, + .direction_input = lp87565_gpio_direction_input, + .direction_output = lp87565_gpio_direction_output, + .get = lp87565_gpio_get, + .set = lp87565_gpio_set, + .set_config = lp87565_gpio_set_config, + .base = -1, + .ngpio = 3, + .can_sleep = true, +}; + +static int lp87565_gpio_probe(struct platform_device *pdev) +{ + struct lp87565_gpio *gpio; + struct lp87565 *lp87565; + int ret; + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + lp87565 = dev_get_drvdata(pdev->dev.parent); + gpio->chip = template_chip; + gpio->chip.parent = lp87565->dev; + gpio->map = lp87565->regmap; + + ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + return 0; +} + +static const struct platform_device_id lp87565_gpio_id_table[] = { + { "lp87565-q1-gpio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, lp87565_gpio_id_table); + +static struct platform_driver lp87565_gpio_driver = { + .driver = { + .name = "lp87565-gpio", + }, + .probe = lp87565_gpio_probe, + .id_table = lp87565_gpio_id_table, +}; +module_platform_driver(lp87565_gpio_driver); + +MODULE_AUTHOR("Keerthy <j-keerthy@ti.com>"); +MODULE_DESCRIPTION("LP87565 GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-lpc18xx.c b/drivers/gpio/gpio-lpc18xx.c new file mode 100644 index 000000000..f12e02e10 --- /dev/null +++ b/drivers/gpio/gpio-lpc18xx.c @@ -0,0 +1,165 @@ +/* + * GPIO driver for NXP LPC18xx/43xx. + * + * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/clk.h> +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> + +/* LPC18xx GPIO register offsets */ +#define LPC18XX_REG_DIR(n) (0x2000 + n * sizeof(u32)) + +#define LPC18XX_MAX_PORTS 8 +#define LPC18XX_PINS_PER_PORT 32 + +struct lpc18xx_gpio_chip { + struct gpio_chip gpio; + void __iomem *base; + struct clk *clk; + spinlock_t lock; +}; + +static void lpc18xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct lpc18xx_gpio_chip *gc = gpiochip_get_data(chip); + writeb(value ? 1 : 0, gc->base + offset); +} + +static int lpc18xx_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct lpc18xx_gpio_chip *gc = gpiochip_get_data(chip); + return !!readb(gc->base + offset); +} + +static int lpc18xx_gpio_direction(struct gpio_chip *chip, unsigned offset, + bool out) +{ + struct lpc18xx_gpio_chip *gc = gpiochip_get_data(chip); + unsigned long flags; + u32 port, pin, dir; + + port = offset / LPC18XX_PINS_PER_PORT; + pin = offset % LPC18XX_PINS_PER_PORT; + + spin_lock_irqsave(&gc->lock, flags); + dir = readl(gc->base + LPC18XX_REG_DIR(port)); + if (out) + dir |= BIT(pin); + else + dir &= ~BIT(pin); + writel(dir, gc->base + LPC18XX_REG_DIR(port)); + spin_unlock_irqrestore(&gc->lock, flags); + + return 0; +} + +static int lpc18xx_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + return lpc18xx_gpio_direction(chip, offset, false); +} + +static int lpc18xx_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + lpc18xx_gpio_set(chip, offset, value); + return lpc18xx_gpio_direction(chip, offset, true); +} + +static const struct gpio_chip lpc18xx_chip = { + .label = "lpc18xx/43xx-gpio", + .request = gpiochip_generic_request, + .free = gpiochip_generic_free, + .direction_input = lpc18xx_gpio_direction_input, + .direction_output = lpc18xx_gpio_direction_output, + .set = lpc18xx_gpio_set, + .get = lpc18xx_gpio_get, + .ngpio = LPC18XX_MAX_PORTS * LPC18XX_PINS_PER_PORT, + .owner = THIS_MODULE, +}; + +static int lpc18xx_gpio_probe(struct platform_device *pdev) +{ + struct lpc18xx_gpio_chip *gc; + struct resource *res; + int ret; + + gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL); + if (!gc) + return -ENOMEM; + + gc->gpio = lpc18xx_chip; + platform_set_drvdata(pdev, gc); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gc->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(gc->base)) + return PTR_ERR(gc->base); + + gc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(gc->clk)) { + dev_err(&pdev->dev, "input clock not found\n"); + return PTR_ERR(gc->clk); + } + + ret = clk_prepare_enable(gc->clk); + if (ret) { + dev_err(&pdev->dev, "unable to enable clock\n"); + return ret; + } + + spin_lock_init(&gc->lock); + + gc->gpio.parent = &pdev->dev; + + ret = gpiochip_add_data(&gc->gpio, gc); + if (ret) { + dev_err(&pdev->dev, "failed to add gpio chip\n"); + clk_disable_unprepare(gc->clk); + return ret; + } + + return 0; +} + +static int lpc18xx_gpio_remove(struct platform_device *pdev) +{ + struct lpc18xx_gpio_chip *gc = platform_get_drvdata(pdev); + + gpiochip_remove(&gc->gpio); + clk_disable_unprepare(gc->clk); + + return 0; +} + +static const struct of_device_id lpc18xx_gpio_match[] = { + { .compatible = "nxp,lpc1850-gpio" }, + { } +}; +MODULE_DEVICE_TABLE(of, lpc18xx_gpio_match); + +static struct platform_driver lpc18xx_gpio_driver = { + .probe = lpc18xx_gpio_probe, + .remove = lpc18xx_gpio_remove, + .driver = { + .name = "lpc18xx-gpio", + .of_match_table = lpc18xx_gpio_match, + }, +}; +module_platform_driver(lpc18xx_gpio_driver); + +MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>"); +MODULE_DESCRIPTION("GPIO driver for LPC18xx/43xx"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c new file mode 100644 index 000000000..aa74cc4d8 --- /dev/null +++ b/drivers/gpio/gpio-lpc32xx.c @@ -0,0 +1,538 @@ +/* + * GPIO driver for LPC32xx SoC + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/gpio/driver.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/module.h> + +#include <mach/hardware.h> +#include <mach/platform.h> + +#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000) +#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004) +#define LPC32XX_GPIO_P3_OUTP_CLR _GPREG(0x008) +#define LPC32XX_GPIO_P3_OUTP_STATE _GPREG(0x00C) +#define LPC32XX_GPIO_P2_DIR_SET _GPREG(0x010) +#define LPC32XX_GPIO_P2_DIR_CLR _GPREG(0x014) +#define LPC32XX_GPIO_P2_DIR_STATE _GPREG(0x018) +#define LPC32XX_GPIO_P2_INP_STATE _GPREG(0x01C) +#define LPC32XX_GPIO_P2_OUTP_SET _GPREG(0x020) +#define LPC32XX_GPIO_P2_OUTP_CLR _GPREG(0x024) +#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028) +#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C) +#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030) +#define LPC32XX_GPIO_P0_INP_STATE _GPREG(0x040) +#define LPC32XX_GPIO_P0_OUTP_SET _GPREG(0x044) +#define LPC32XX_GPIO_P0_OUTP_CLR _GPREG(0x048) +#define LPC32XX_GPIO_P0_OUTP_STATE _GPREG(0x04C) +#define LPC32XX_GPIO_P0_DIR_SET _GPREG(0x050) +#define LPC32XX_GPIO_P0_DIR_CLR _GPREG(0x054) +#define LPC32XX_GPIO_P0_DIR_STATE _GPREG(0x058) +#define LPC32XX_GPIO_P1_INP_STATE _GPREG(0x060) +#define LPC32XX_GPIO_P1_OUTP_SET _GPREG(0x064) +#define LPC32XX_GPIO_P1_OUTP_CLR _GPREG(0x068) +#define LPC32XX_GPIO_P1_OUTP_STATE _GPREG(0x06C) +#define LPC32XX_GPIO_P1_DIR_SET _GPREG(0x070) +#define LPC32XX_GPIO_P1_DIR_CLR _GPREG(0x074) +#define LPC32XX_GPIO_P1_DIR_STATE _GPREG(0x078) + +#define GPIO012_PIN_TO_BIT(x) (1 << (x)) +#define GPIO3_PIN_TO_BIT(x) (1 << ((x) + 25)) +#define GPO3_PIN_TO_BIT(x) (1 << (x)) +#define GPIO012_PIN_IN_SEL(x, y) (((x) >> (y)) & 1) +#define GPIO3_PIN_IN_SHIFT(x) ((x) == 5 ? 24 : 10 + (x)) +#define GPIO3_PIN_IN_SEL(x, y) (((x) >> GPIO3_PIN_IN_SHIFT(y)) & 1) +#define GPIO3_PIN5_IN_SEL(x) (((x) >> 24) & 1) +#define GPI3_PIN_IN_SEL(x, y) (((x) >> (y)) & 1) +#define GPO3_PIN_IN_SEL(x, y) (((x) >> (y)) & 1) + +#define LPC32XX_GPIO_P0_MAX 8 +#define LPC32XX_GPIO_P1_MAX 24 +#define LPC32XX_GPIO_P2_MAX 13 +#define LPC32XX_GPIO_P3_MAX 6 +#define LPC32XX_GPI_P3_MAX 29 +#define LPC32XX_GPO_P3_MAX 24 + +#define LPC32XX_GPIO_P0_GRP 0 +#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX) +#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX) +#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX) +#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX) +#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX) + +struct gpio_regs { + void __iomem *inp_state; + void __iomem *outp_state; + void __iomem *outp_set; + void __iomem *outp_clr; + void __iomem *dir_set; + void __iomem *dir_clr; +}; + +/* + * GPIO names + */ +static const char *gpio_p0_names[LPC32XX_GPIO_P0_MAX] = { + "p0.0", "p0.1", "p0.2", "p0.3", + "p0.4", "p0.5", "p0.6", "p0.7" +}; + +static const char *gpio_p1_names[LPC32XX_GPIO_P1_MAX] = { + "p1.0", "p1.1", "p1.2", "p1.3", + "p1.4", "p1.5", "p1.6", "p1.7", + "p1.8", "p1.9", "p1.10", "p1.11", + "p1.12", "p1.13", "p1.14", "p1.15", + "p1.16", "p1.17", "p1.18", "p1.19", + "p1.20", "p1.21", "p1.22", "p1.23", +}; + +static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = { + "p2.0", "p2.1", "p2.2", "p2.3", + "p2.4", "p2.5", "p2.6", "p2.7", + "p2.8", "p2.9", "p2.10", "p2.11", + "p2.12" +}; + +static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = { + "gpio00", "gpio01", "gpio02", "gpio03", + "gpio04", "gpio05" +}; + +static const char *gpi_p3_names[LPC32XX_GPI_P3_MAX] = { + "gpi00", "gpi01", "gpi02", "gpi03", + "gpi04", "gpi05", "gpi06", "gpi07", + "gpi08", "gpi09", NULL, NULL, + NULL, NULL, NULL, "gpi15", + "gpi16", "gpi17", "gpi18", "gpi19", + "gpi20", "gpi21", "gpi22", "gpi23", + "gpi24", "gpi25", "gpi26", "gpi27", + "gpi28" +}; + +static const char *gpo_p3_names[LPC32XX_GPO_P3_MAX] = { + "gpo00", "gpo01", "gpo02", "gpo03", + "gpo04", "gpo05", "gpo06", "gpo07", + "gpo08", "gpo09", "gpo10", "gpo11", + "gpo12", "gpo13", "gpo14", "gpo15", + "gpo16", "gpo17", "gpo18", "gpo19", + "gpo20", "gpo21", "gpo22", "gpo23" +}; + +static struct gpio_regs gpio_grp_regs_p0 = { + .inp_state = LPC32XX_GPIO_P0_INP_STATE, + .outp_set = LPC32XX_GPIO_P0_OUTP_SET, + .outp_clr = LPC32XX_GPIO_P0_OUTP_CLR, + .dir_set = LPC32XX_GPIO_P0_DIR_SET, + .dir_clr = LPC32XX_GPIO_P0_DIR_CLR, +}; + +static struct gpio_regs gpio_grp_regs_p1 = { + .inp_state = LPC32XX_GPIO_P1_INP_STATE, + .outp_set = LPC32XX_GPIO_P1_OUTP_SET, + .outp_clr = LPC32XX_GPIO_P1_OUTP_CLR, + .dir_set = LPC32XX_GPIO_P1_DIR_SET, + .dir_clr = LPC32XX_GPIO_P1_DIR_CLR, +}; + +static struct gpio_regs gpio_grp_regs_p2 = { + .inp_state = LPC32XX_GPIO_P2_INP_STATE, + .outp_set = LPC32XX_GPIO_P2_OUTP_SET, + .outp_clr = LPC32XX_GPIO_P2_OUTP_CLR, + .dir_set = LPC32XX_GPIO_P2_DIR_SET, + .dir_clr = LPC32XX_GPIO_P2_DIR_CLR, +}; + +static struct gpio_regs gpio_grp_regs_p3 = { + .inp_state = LPC32XX_GPIO_P3_INP_STATE, + .outp_state = LPC32XX_GPIO_P3_OUTP_STATE, + .outp_set = LPC32XX_GPIO_P3_OUTP_SET, + .outp_clr = LPC32XX_GPIO_P3_OUTP_CLR, + .dir_set = LPC32XX_GPIO_P2_DIR_SET, + .dir_clr = LPC32XX_GPIO_P2_DIR_CLR, +}; + +struct lpc32xx_gpio_chip { + struct gpio_chip chip; + struct gpio_regs *gpio_grp; +}; + +static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group, + unsigned pin, int input) +{ + if (input) + __raw_writel(GPIO012_PIN_TO_BIT(pin), + group->gpio_grp->dir_clr); + else + __raw_writel(GPIO012_PIN_TO_BIT(pin), + group->gpio_grp->dir_set); +} + +static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group, + unsigned pin, int input) +{ + u32 u = GPIO3_PIN_TO_BIT(pin); + + if (input) + __raw_writel(u, group->gpio_grp->dir_clr); + else + __raw_writel(u, group->gpio_grp->dir_set); +} + +static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group, + unsigned pin, int high) +{ + if (high) + __raw_writel(GPIO012_PIN_TO_BIT(pin), + group->gpio_grp->outp_set); + else + __raw_writel(GPIO012_PIN_TO_BIT(pin), + group->gpio_grp->outp_clr); +} + +static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group, + unsigned pin, int high) +{ + u32 u = GPIO3_PIN_TO_BIT(pin); + + if (high) + __raw_writel(u, group->gpio_grp->outp_set); + else + __raw_writel(u, group->gpio_grp->outp_clr); +} + +static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group, + unsigned pin, int high) +{ + if (high) + __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set); + else + __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr); +} + +static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group, + unsigned pin) +{ + return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), + pin); +} + +static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group, + unsigned pin) +{ + int state = __raw_readl(group->gpio_grp->inp_state); + + /* + * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped + * to bits 10..14, while GPIOP3-5 is mapped to bit 24. + */ + return GPIO3_PIN_IN_SEL(state, pin); +} + +static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group, + unsigned pin) +{ + return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin); +} + +static int __get_gpo_state_p3(struct lpc32xx_gpio_chip *group, + unsigned pin) +{ + return GPO3_PIN_IN_SEL(__raw_readl(group->gpio_grp->outp_state), pin); +} + +/* + * GPIO primitives. + */ +static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip, + unsigned pin) +{ + struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip); + + __set_gpio_dir_p012(group, pin, 1); + + return 0; +} + +static int lpc32xx_gpio_dir_input_p3(struct gpio_chip *chip, + unsigned pin) +{ + struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip); + + __set_gpio_dir_p3(group, pin, 1); + + return 0; +} + +static int lpc32xx_gpio_dir_in_always(struct gpio_chip *chip, + unsigned pin) +{ + return 0; +} + +static int lpc32xx_gpio_get_value_p012(struct gpio_chip *chip, unsigned pin) +{ + struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip); + + return !!__get_gpio_state_p012(group, pin); +} + +static int lpc32xx_gpio_get_value_p3(struct gpio_chip *chip, unsigned pin) +{ + struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip); + + return !!__get_gpio_state_p3(group, pin); +} + +static int lpc32xx_gpi_get_value(struct gpio_chip *chip, unsigned pin) +{ + struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip); + + return !!__get_gpi_state_p3(group, pin); +} + +static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin, + int value) +{ + struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip); + + __set_gpio_level_p012(group, pin, value); + __set_gpio_dir_p012(group, pin, 0); + + return 0; +} + +static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin, + int value) +{ + struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip); + + __set_gpio_level_p3(group, pin, value); + __set_gpio_dir_p3(group, pin, 0); + + return 0; +} + +static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin, + int value) +{ + struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip); + + __set_gpo_level_p3(group, pin, value); + return 0; +} + +static void lpc32xx_gpio_set_value_p012(struct gpio_chip *chip, unsigned pin, + int value) +{ + struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip); + + __set_gpio_level_p012(group, pin, value); +} + +static void lpc32xx_gpio_set_value_p3(struct gpio_chip *chip, unsigned pin, + int value) +{ + struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip); + + __set_gpio_level_p3(group, pin, value); +} + +static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin, + int value) +{ + struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip); + + __set_gpo_level_p3(group, pin, value); +} + +static int lpc32xx_gpo_get_value(struct gpio_chip *chip, unsigned pin) +{ + struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip); + + return !!__get_gpo_state_p3(group, pin); +} + +static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin) +{ + if (pin < chip->ngpio) + return 0; + + return -EINVAL; +} + +static int lpc32xx_gpio_to_irq_p01(struct gpio_chip *chip, unsigned offset) +{ + return -ENXIO; +} + +static int lpc32xx_gpio_to_irq_gpio_p3(struct gpio_chip *chip, unsigned offset) +{ + return -ENXIO; +} + +static int lpc32xx_gpio_to_irq_gpi_p3(struct gpio_chip *chip, unsigned offset) +{ + return -ENXIO; +} + +static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = { + { + .chip = { + .label = "gpio_p0", + .direction_input = lpc32xx_gpio_dir_input_p012, + .get = lpc32xx_gpio_get_value_p012, + .direction_output = lpc32xx_gpio_dir_output_p012, + .set = lpc32xx_gpio_set_value_p012, + .request = lpc32xx_gpio_request, + .to_irq = lpc32xx_gpio_to_irq_p01, + .base = LPC32XX_GPIO_P0_GRP, + .ngpio = LPC32XX_GPIO_P0_MAX, + .names = gpio_p0_names, + .can_sleep = false, + }, + .gpio_grp = &gpio_grp_regs_p0, + }, + { + .chip = { + .label = "gpio_p1", + .direction_input = lpc32xx_gpio_dir_input_p012, + .get = lpc32xx_gpio_get_value_p012, + .direction_output = lpc32xx_gpio_dir_output_p012, + .set = lpc32xx_gpio_set_value_p012, + .request = lpc32xx_gpio_request, + .to_irq = lpc32xx_gpio_to_irq_p01, + .base = LPC32XX_GPIO_P1_GRP, + .ngpio = LPC32XX_GPIO_P1_MAX, + .names = gpio_p1_names, + .can_sleep = false, + }, + .gpio_grp = &gpio_grp_regs_p1, + }, + { + .chip = { + .label = "gpio_p2", + .direction_input = lpc32xx_gpio_dir_input_p012, + .get = lpc32xx_gpio_get_value_p012, + .direction_output = lpc32xx_gpio_dir_output_p012, + .set = lpc32xx_gpio_set_value_p012, + .request = lpc32xx_gpio_request, + .base = LPC32XX_GPIO_P2_GRP, + .ngpio = LPC32XX_GPIO_P2_MAX, + .names = gpio_p2_names, + .can_sleep = false, + }, + .gpio_grp = &gpio_grp_regs_p2, + }, + { + .chip = { + .label = "gpio_p3", + .direction_input = lpc32xx_gpio_dir_input_p3, + .get = lpc32xx_gpio_get_value_p3, + .direction_output = lpc32xx_gpio_dir_output_p3, + .set = lpc32xx_gpio_set_value_p3, + .request = lpc32xx_gpio_request, + .to_irq = lpc32xx_gpio_to_irq_gpio_p3, + .base = LPC32XX_GPIO_P3_GRP, + .ngpio = LPC32XX_GPIO_P3_MAX, + .names = gpio_p3_names, + .can_sleep = false, + }, + .gpio_grp = &gpio_grp_regs_p3, + }, + { + .chip = { + .label = "gpi_p3", + .direction_input = lpc32xx_gpio_dir_in_always, + .get = lpc32xx_gpi_get_value, + .request = lpc32xx_gpio_request, + .to_irq = lpc32xx_gpio_to_irq_gpi_p3, + .base = LPC32XX_GPI_P3_GRP, + .ngpio = LPC32XX_GPI_P3_MAX, + .names = gpi_p3_names, + .can_sleep = false, + }, + .gpio_grp = &gpio_grp_regs_p3, + }, + { + .chip = { + .label = "gpo_p3", + .direction_output = lpc32xx_gpio_dir_out_always, + .set = lpc32xx_gpo_set_value, + .get = lpc32xx_gpo_get_value, + .request = lpc32xx_gpio_request, + .base = LPC32XX_GPO_P3_GRP, + .ngpio = LPC32XX_GPO_P3_MAX, + .names = gpo_p3_names, + .can_sleep = false, + }, + .gpio_grp = &gpio_grp_regs_p3, + }, +}; + +static int lpc32xx_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, u32 *flags) +{ + /* Is this the correct bank? */ + u32 bank = gpiospec->args[0]; + if ((bank >= ARRAY_SIZE(lpc32xx_gpiochip) || + (gc != &lpc32xx_gpiochip[bank].chip))) + return -EINVAL; + + if (flags) + *flags = gpiospec->args[2]; + return gpiospec->args[1]; +} + +static int lpc32xx_gpio_probe(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) { + if (pdev->dev.of_node) { + lpc32xx_gpiochip[i].chip.of_xlate = lpc32xx_of_xlate; + lpc32xx_gpiochip[i].chip.of_gpio_n_cells = 3; + lpc32xx_gpiochip[i].chip.of_node = pdev->dev.of_node; + } + devm_gpiochip_add_data(&pdev->dev, &lpc32xx_gpiochip[i].chip, + &lpc32xx_gpiochip[i]); + } + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id lpc32xx_gpio_of_match[] = { + { .compatible = "nxp,lpc3220-gpio", }, + { }, +}; +#endif + +static struct platform_driver lpc32xx_gpio_driver = { + .driver = { + .name = "lpc32xx-gpio", + .of_match_table = of_match_ptr(lpc32xx_gpio_of_match), + }, + .probe = lpc32xx_gpio_probe, +}; + +module_platform_driver(lpc32xx_gpio_driver); diff --git a/drivers/gpio/gpio-lynxpoint.c b/drivers/gpio/gpio-lynxpoint.c new file mode 100644 index 000000000..b5b5e500e --- /dev/null +++ b/drivers/gpio/gpio-lynxpoint.c @@ -0,0 +1,471 @@ +/* + * GPIO controller driver for Intel Lynxpoint PCH chipset> + * Copyright (c) 2012, Intel Corporation. + * + * Author: Mathias Nyman <mathias.nyman@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/bitops.h> +#include <linux/interrupt.h> +#include <linux/gpio/driver.h> +#include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/io.h> + +/* LynxPoint chipset has support for 94 gpio pins */ + +#define LP_NUM_GPIO 94 + +/* Bitmapped register offsets */ +#define LP_ACPI_OWNED 0x00 /* Bitmap, set by bios, 0: pin reserved for ACPI */ +#define LP_GC 0x7C /* set APIC IRQ to IRQ14 or IRQ15 for all pins */ +#define LP_INT_STAT 0x80 +#define LP_INT_ENABLE 0x90 + +/* Each pin has two 32 bit config registers, starting at 0x100 */ +#define LP_CONFIG1 0x100 +#define LP_CONFIG2 0x104 + +/* LP_CONFIG1 reg bits */ +#define OUT_LVL_BIT BIT(31) +#define IN_LVL_BIT BIT(30) +#define TRIG_SEL_BIT BIT(4) /* 0: Edge, 1: Level */ +#define INT_INV_BIT BIT(3) /* Invert interrupt triggering */ +#define DIR_BIT BIT(2) /* 0: Output, 1: Input */ +#define USE_SEL_BIT BIT(0) /* 0: Native, 1: GPIO */ + +/* LP_CONFIG2 reg bits */ +#define GPINDIS_BIT BIT(2) /* disable input sensing */ +#define GPIWP_BIT (BIT(0) | BIT(1)) /* weak pull options */ + +struct lp_gpio { + struct gpio_chip chip; + struct platform_device *pdev; + spinlock_t lock; + unsigned long reg_base; +}; + +/* + * Lynxpoint gpios are controlled through both bitmapped registers and + * per gpio specific registers. The bitmapped registers are in chunks of + * 3 x 32bit registers to cover all 94 gpios + * + * per gpio specific registers consist of two 32bit registers per gpio + * (LP_CONFIG1 and LP_CONFIG2), with 94 gpios there's a total of + * 188 config registers. + * + * A simplified view of the register layout look like this: + * + * LP_ACPI_OWNED[31:0] gpio ownerships for gpios 0-31 (bitmapped registers) + * LP_ACPI_OWNED[63:32] gpio ownerships for gpios 32-63 + * LP_ACPI_OWNED[94:64] gpio ownerships for gpios 63-94 + * ... + * LP_INT_ENABLE[31:0] ... + * LP_INT_ENABLE[63:31] ... + * LP_INT_ENABLE[94:64] ... + * LP0_CONFIG1 (gpio 0) config1 reg for gpio 0 (per gpio registers) + * LP0_CONFIG2 (gpio 0) config2 reg for gpio 0 + * LP1_CONFIG1 (gpio 1) config1 reg for gpio 1 + * LP1_CONFIG2 (gpio 1) config2 reg for gpio 1 + * LP2_CONFIG1 (gpio 2) ... + * LP2_CONFIG2 (gpio 2) ... + * ... + * LP94_CONFIG1 (gpio 94) ... + * LP94_CONFIG2 (gpio 94) ... + */ + +static unsigned long lp_gpio_reg(struct gpio_chip *chip, unsigned offset, + int reg) +{ + struct lp_gpio *lg = gpiochip_get_data(chip); + int reg_offset; + + if (reg == LP_CONFIG1 || reg == LP_CONFIG2) + /* per gpio specific config registers */ + reg_offset = offset * 8; + else + /* bitmapped registers */ + reg_offset = (offset / 32) * 4; + + return lg->reg_base + reg + reg_offset; +} + +static int lp_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct lp_gpio *lg = gpiochip_get_data(chip); + unsigned long reg = lp_gpio_reg(chip, offset, LP_CONFIG1); + unsigned long conf2 = lp_gpio_reg(chip, offset, LP_CONFIG2); + unsigned long acpi_use = lp_gpio_reg(chip, offset, LP_ACPI_OWNED); + + pm_runtime_get(&lg->pdev->dev); /* should we put if failed */ + + /* Fail if BIOS reserved pin for ACPI use */ + if (!(inl(acpi_use) & BIT(offset % 32))) { + dev_err(&lg->pdev->dev, "gpio %d reserved for ACPI\n", offset); + return -EBUSY; + } + /* Fail if pin is in alternate function mode (not GPIO mode) */ + if (!(inl(reg) & USE_SEL_BIT)) + return -ENODEV; + + /* enable input sensing */ + outl(inl(conf2) & ~GPINDIS_BIT, conf2); + + + return 0; +} + +static void lp_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct lp_gpio *lg = gpiochip_get_data(chip); + unsigned long conf2 = lp_gpio_reg(chip, offset, LP_CONFIG2); + + /* disable input sensing */ + outl(inl(conf2) | GPINDIS_BIT, conf2); + + pm_runtime_put(&lg->pdev->dev); +} + +static int lp_irq_type(struct irq_data *d, unsigned type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct lp_gpio *lg = gpiochip_get_data(gc); + u32 hwirq = irqd_to_hwirq(d); + unsigned long flags; + u32 value; + unsigned long reg = lp_gpio_reg(&lg->chip, hwirq, LP_CONFIG1); + + if (hwirq >= lg->chip.ngpio) + return -EINVAL; + + spin_lock_irqsave(&lg->lock, flags); + value = inl(reg); + + /* set both TRIG_SEL and INV bits to 0 for rising edge */ + if (type & IRQ_TYPE_EDGE_RISING) + value &= ~(TRIG_SEL_BIT | INT_INV_BIT); + + /* TRIG_SEL bit 0, INV bit 1 for falling edge */ + if (type & IRQ_TYPE_EDGE_FALLING) + value = (value | INT_INV_BIT) & ~TRIG_SEL_BIT; + + /* TRIG_SEL bit 1, INV bit 0 for level low */ + if (type & IRQ_TYPE_LEVEL_LOW) + value = (value | TRIG_SEL_BIT) & ~INT_INV_BIT; + + /* TRIG_SEL bit 1, INV bit 1 for level high */ + if (type & IRQ_TYPE_LEVEL_HIGH) + value |= TRIG_SEL_BIT | INT_INV_BIT; + + outl(value, reg); + spin_unlock_irqrestore(&lg->lock, flags); + + return 0; +} + +static int lp_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + unsigned long reg = lp_gpio_reg(chip, offset, LP_CONFIG1); + return !!(inl(reg) & IN_LVL_BIT); +} + +static void lp_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct lp_gpio *lg = gpiochip_get_data(chip); + unsigned long reg = lp_gpio_reg(chip, offset, LP_CONFIG1); + unsigned long flags; + + spin_lock_irqsave(&lg->lock, flags); + + if (value) + outl(inl(reg) | OUT_LVL_BIT, reg); + else + outl(inl(reg) & ~OUT_LVL_BIT, reg); + + spin_unlock_irqrestore(&lg->lock, flags); +} + +static int lp_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct lp_gpio *lg = gpiochip_get_data(chip); + unsigned long reg = lp_gpio_reg(chip, offset, LP_CONFIG1); + unsigned long flags; + + spin_lock_irqsave(&lg->lock, flags); + outl(inl(reg) | DIR_BIT, reg); + spin_unlock_irqrestore(&lg->lock, flags); + + return 0; +} + +static int lp_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct lp_gpio *lg = gpiochip_get_data(chip); + unsigned long reg = lp_gpio_reg(chip, offset, LP_CONFIG1); + unsigned long flags; + + lp_gpio_set(chip, offset, value); + + spin_lock_irqsave(&lg->lock, flags); + outl(inl(reg) & ~DIR_BIT, reg); + spin_unlock_irqrestore(&lg->lock, flags); + + return 0; +} + +static void lp_gpio_irq_handler(struct irq_desc *desc) +{ + struct irq_data *data = irq_desc_get_irq_data(desc); + struct gpio_chip *gc = irq_desc_get_handler_data(desc); + struct lp_gpio *lg = gpiochip_get_data(gc); + struct irq_chip *chip = irq_data_get_irq_chip(data); + u32 base, pin, mask; + unsigned long reg, ena, pending; + + /* check from GPIO controller which pin triggered the interrupt */ + for (base = 0; base < lg->chip.ngpio; base += 32) { + reg = lp_gpio_reg(&lg->chip, base, LP_INT_STAT); + ena = lp_gpio_reg(&lg->chip, base, LP_INT_ENABLE); + + while ((pending = (inl(reg) & inl(ena)))) { + unsigned irq; + + pin = __ffs(pending); + mask = BIT(pin); + /* Clear before handling so we don't lose an edge */ + outl(mask, reg); + irq = irq_find_mapping(lg->chip.irq.domain, base + pin); + generic_handle_irq(irq); + } + } + chip->irq_eoi(data); +} + +static void lp_irq_unmask(struct irq_data *d) +{ +} + +static void lp_irq_mask(struct irq_data *d) +{ +} + +static void lp_irq_enable(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct lp_gpio *lg = gpiochip_get_data(gc); + u32 hwirq = irqd_to_hwirq(d); + unsigned long reg = lp_gpio_reg(&lg->chip, hwirq, LP_INT_ENABLE); + unsigned long flags; + + spin_lock_irqsave(&lg->lock, flags); + outl(inl(reg) | BIT(hwirq % 32), reg); + spin_unlock_irqrestore(&lg->lock, flags); +} + +static void lp_irq_disable(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct lp_gpio *lg = gpiochip_get_data(gc); + u32 hwirq = irqd_to_hwirq(d); + unsigned long reg = lp_gpio_reg(&lg->chip, hwirq, LP_INT_ENABLE); + unsigned long flags; + + spin_lock_irqsave(&lg->lock, flags); + outl(inl(reg) & ~BIT(hwirq % 32), reg); + spin_unlock_irqrestore(&lg->lock, flags); +} + +static struct irq_chip lp_irqchip = { + .name = "LP-GPIO", + .irq_mask = lp_irq_mask, + .irq_unmask = lp_irq_unmask, + .irq_enable = lp_irq_enable, + .irq_disable = lp_irq_disable, + .irq_set_type = lp_irq_type, + .flags = IRQCHIP_SKIP_SET_WAKE, +}; + +static void lp_gpio_irq_init_hw(struct lp_gpio *lg) +{ + unsigned long reg; + unsigned base; + + for (base = 0; base < lg->chip.ngpio; base += 32) { + /* disable gpio pin interrupts */ + reg = lp_gpio_reg(&lg->chip, base, LP_INT_ENABLE); + outl(0, reg); + /* Clear interrupt status register */ + reg = lp_gpio_reg(&lg->chip, base, LP_INT_STAT); + outl(0xffffffff, reg); + } +} + +static int lp_gpio_probe(struct platform_device *pdev) +{ + struct lp_gpio *lg; + struct gpio_chip *gc; + struct resource *io_rc, *irq_rc; + struct device *dev = &pdev->dev; + unsigned long reg_len; + int ret = -ENODEV; + + lg = devm_kzalloc(dev, sizeof(struct lp_gpio), GFP_KERNEL); + if (!lg) + return -ENOMEM; + + lg->pdev = pdev; + platform_set_drvdata(pdev, lg); + + io_rc = platform_get_resource(pdev, IORESOURCE_IO, 0); + irq_rc = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + + if (!io_rc) { + dev_err(dev, "missing IO resources\n"); + return -EINVAL; + } + + lg->reg_base = io_rc->start; + reg_len = resource_size(io_rc); + + if (!devm_request_region(dev, lg->reg_base, reg_len, "lp-gpio")) { + dev_err(dev, "failed requesting IO region 0x%x\n", + (unsigned int)lg->reg_base); + return -EBUSY; + } + + spin_lock_init(&lg->lock); + + gc = &lg->chip; + gc->label = dev_name(dev); + gc->owner = THIS_MODULE; + gc->request = lp_gpio_request; + gc->free = lp_gpio_free; + gc->direction_input = lp_gpio_direction_input; + gc->direction_output = lp_gpio_direction_output; + gc->get = lp_gpio_get; + gc->set = lp_gpio_set; + gc->base = -1; + gc->ngpio = LP_NUM_GPIO; + gc->can_sleep = false; + gc->parent = dev; + + ret = devm_gpiochip_add_data(dev, gc, lg); + if (ret) { + dev_err(dev, "failed adding lp-gpio chip\n"); + return ret; + } + + /* set up interrupts */ + if (irq_rc && irq_rc->start) { + lp_gpio_irq_init_hw(lg); + ret = gpiochip_irqchip_add(gc, &lp_irqchip, 0, + handle_simple_irq, IRQ_TYPE_NONE); + if (ret) { + dev_err(dev, "failed to add irqchip\n"); + return ret; + } + + gpiochip_set_chained_irqchip(gc, &lp_irqchip, + (unsigned)irq_rc->start, + lp_gpio_irq_handler); + } + + pm_runtime_enable(dev); + + return 0; +} + +static int lp_gpio_runtime_suspend(struct device *dev) +{ + return 0; +} + +static int lp_gpio_runtime_resume(struct device *dev) +{ + return 0; +} + +static int lp_gpio_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct lp_gpio *lg = platform_get_drvdata(pdev); + unsigned long reg; + int i; + + /* on some hardware suspend clears input sensing, re-enable it here */ + for (i = 0; i < lg->chip.ngpio; i++) { + if (gpiochip_is_requested(&lg->chip, i) != NULL) { + reg = lp_gpio_reg(&lg->chip, i, LP_CONFIG2); + outl(inl(reg) & ~GPINDIS_BIT, reg); + } + } + return 0; +} + +static const struct dev_pm_ops lp_gpio_pm_ops = { + .runtime_suspend = lp_gpio_runtime_suspend, + .runtime_resume = lp_gpio_runtime_resume, + .resume = lp_gpio_resume, +}; + +static const struct acpi_device_id lynxpoint_gpio_acpi_match[] = { + { "INT33C7", 0 }, + { "INT3437", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, lynxpoint_gpio_acpi_match); + +static int lp_gpio_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + return 0; +} + +static struct platform_driver lp_gpio_driver = { + .probe = lp_gpio_probe, + .remove = lp_gpio_remove, + .driver = { + .name = "lp_gpio", + .pm = &lp_gpio_pm_ops, + .acpi_match_table = ACPI_PTR(lynxpoint_gpio_acpi_match), + }, +}; + +static int __init lp_gpio_init(void) +{ + return platform_driver_register(&lp_gpio_driver); +} + +static void __exit lp_gpio_exit(void) +{ + platform_driver_unregister(&lp_gpio_driver); +} + +subsys_initcall(lp_gpio_init); +module_exit(lp_gpio_exit); + +MODULE_AUTHOR("Mathias Nyman (Intel)"); +MODULE_DESCRIPTION("GPIO interface for Intel Lynxpoint"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:lp_gpio"); diff --git a/drivers/gpio/gpio-madera.c b/drivers/gpio/gpio-madera.c new file mode 100644 index 000000000..7ba68d1a0 --- /dev/null +++ b/drivers/gpio/gpio-madera.c @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * GPIO support for Cirrus Logic Madera codecs + * + * Copyright (C) 2015-2018 Cirrus Logic + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2. + */ + +#include <linux/gpio/driver.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <linux/mfd/madera/core.h> +#include <linux/mfd/madera/pdata.h> +#include <linux/mfd/madera/registers.h> + +struct madera_gpio { + struct madera *madera; + /* storage space for the gpio_chip we're using */ + struct gpio_chip gpio_chip; +}; + +static int madera_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct madera_gpio *madera_gpio = gpiochip_get_data(chip); + struct madera *madera = madera_gpio->madera; + unsigned int reg_offset = 2 * offset; + unsigned int val; + int ret; + + ret = regmap_read(madera->regmap, MADERA_GPIO1_CTRL_2 + reg_offset, + &val); + if (ret < 0) + return ret; + + return !!(val & MADERA_GP1_DIR_MASK); +} + +static int madera_gpio_direction_in(struct gpio_chip *chip, unsigned int offset) +{ + struct madera_gpio *madera_gpio = gpiochip_get_data(chip); + struct madera *madera = madera_gpio->madera; + unsigned int reg_offset = 2 * offset; + + return regmap_update_bits(madera->regmap, + MADERA_GPIO1_CTRL_2 + reg_offset, + MADERA_GP1_DIR_MASK, MADERA_GP1_DIR); +} + +static int madera_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct madera_gpio *madera_gpio = gpiochip_get_data(chip); + struct madera *madera = madera_gpio->madera; + unsigned int reg_offset = 2 * offset; + unsigned int val; + int ret; + + ret = regmap_read(madera->regmap, MADERA_GPIO1_CTRL_1 + reg_offset, + &val); + if (ret < 0) + return ret; + + return !!(val & MADERA_GP1_LVL_MASK); +} + +static int madera_gpio_direction_out(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct madera_gpio *madera_gpio = gpiochip_get_data(chip); + struct madera *madera = madera_gpio->madera; + unsigned int reg_offset = 2 * offset; + unsigned int reg_val = value ? MADERA_GP1_LVL : 0; + int ret; + + ret = regmap_update_bits(madera->regmap, + MADERA_GPIO1_CTRL_2 + reg_offset, + MADERA_GP1_DIR_MASK, 0); + if (ret < 0) + return ret; + + return regmap_update_bits(madera->regmap, + MADERA_GPIO1_CTRL_1 + reg_offset, + MADERA_GP1_LVL_MASK, reg_val); +} + +static void madera_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct madera_gpio *madera_gpio = gpiochip_get_data(chip); + struct madera *madera = madera_gpio->madera; + unsigned int reg_offset = 2 * offset; + unsigned int reg_val = value ? MADERA_GP1_LVL : 0; + int ret; + + ret = regmap_update_bits(madera->regmap, + MADERA_GPIO1_CTRL_1 + reg_offset, + MADERA_GP1_LVL_MASK, reg_val); + + /* set() doesn't return an error so log a warning */ + if (ret) + dev_warn(madera->dev, "Failed to write to 0x%x (%d)\n", + MADERA_GPIO1_CTRL_1 + reg_offset, ret); +} + +static struct gpio_chip madera_gpio_chip = { + .label = "madera", + .owner = THIS_MODULE, + .request = gpiochip_generic_request, + .free = gpiochip_generic_free, + .get_direction = madera_gpio_get_direction, + .direction_input = madera_gpio_direction_in, + .get = madera_gpio_get, + .direction_output = madera_gpio_direction_out, + .set = madera_gpio_set, + .set_config = gpiochip_generic_config, + .can_sleep = true, +}; + +static int madera_gpio_probe(struct platform_device *pdev) +{ + struct madera *madera = dev_get_drvdata(pdev->dev.parent); + struct madera_pdata *pdata = dev_get_platdata(madera->dev); + struct madera_gpio *madera_gpio; + int ret; + + madera_gpio = devm_kzalloc(&pdev->dev, sizeof(*madera_gpio), + GFP_KERNEL); + if (!madera_gpio) + return -ENOMEM; + + madera_gpio->madera = madera; + + /* Construct suitable gpio_chip from the template in madera_gpio_chip */ + madera_gpio->gpio_chip = madera_gpio_chip; + madera_gpio->gpio_chip.parent = pdev->dev.parent; + + switch (madera->type) { + case CS47L35: + madera_gpio->gpio_chip.ngpio = CS47L35_NUM_GPIOS; + break; + case CS47L85: + case WM1840: + madera_gpio->gpio_chip.ngpio = CS47L85_NUM_GPIOS; + break; + case CS47L90: + case CS47L91: + madera_gpio->gpio_chip.ngpio = CS47L90_NUM_GPIOS; + break; + default: + dev_err(&pdev->dev, "Unknown chip variant %d\n", madera->type); + return -EINVAL; + } + + /* We want to be usable on systems that don't use devicetree or acpi */ + if (pdata && pdata->gpio_base) + madera_gpio->gpio_chip.base = pdata->gpio_base; + else + madera_gpio->gpio_chip.base = -1; + + ret = devm_gpiochip_add_data(&pdev->dev, + &madera_gpio->gpio_chip, + madera_gpio); + if (ret < 0) { + dev_dbg(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + /* + * This is part of a composite MFD device which can only be used with + * the corresponding pinctrl driver. On all supported silicon the GPIO + * to pinctrl mapping is fixed in the silicon, so we register it + * explicitly instead of requiring a redundant gpio-ranges in the + * devicetree. + * In any case we also want to work on systems that don't use devicetree + * or acpi. + */ + ret = gpiochip_add_pin_range(&madera_gpio->gpio_chip, "madera-pinctrl", + 0, 0, madera_gpio->gpio_chip.ngpio); + if (ret) { + dev_dbg(&pdev->dev, "Failed to add pin range (%d)\n", ret); + return ret; + } + + return 0; +} + +static struct platform_driver madera_gpio_driver = { + .driver = { + .name = "madera-gpio", + }, + .probe = madera_gpio_probe, +}; + +module_platform_driver(madera_gpio_driver); + +MODULE_SOFTDEP("pre: pinctrl-madera"); +MODULE_DESCRIPTION("GPIO interface for Madera codecs"); +MODULE_AUTHOR("Nariman Poushin <nariman@opensource.cirrus.com>"); +MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:madera-gpio"); diff --git a/drivers/gpio/gpio-max3191x.c b/drivers/gpio/gpio-max3191x.c new file mode 100644 index 000000000..b5b9cb1fd --- /dev/null +++ b/drivers/gpio/gpio-max3191x.c @@ -0,0 +1,497 @@ +/* + * gpio-max3191x.c - GPIO driver for Maxim MAX3191x industrial serializer + * + * Copyright (C) 2017 KUNBUS GmbH + * + * The MAX3191x makes 8 digital 24V inputs available via SPI. + * Multiple chips can be daisy-chained, the spec does not impose + * a limit on the number of chips and neither does this driver. + * + * Either of two modes is selectable: In 8-bit mode, only the state + * of the inputs is clocked out to achieve high readout speeds; + * In 16-bit mode, an additional status byte is clocked out with + * a CRC and indicator bits for undervoltage and overtemperature. + * The driver returns an error instead of potentially bogus data + * if any of these fault conditions occur. However it does allow + * readout of non-faulting chips in the same daisy-chain. + * + * MAX3191x supports four debounce settings and the driver is + * capable of configuring these differently for each chip in the + * daisy-chain. + * + * If the chips are hardwired to 8-bit mode ("modesel" pulled high), + * gpio-pisosr.c can be used alternatively to this driver. + * + * https://datasheets.maximintegrated.com/en/ds/MAX31910.pdf + * https://datasheets.maximintegrated.com/en/ds/MAX31911.pdf + * https://datasheets.maximintegrated.com/en/ds/MAX31912.pdf + * https://datasheets.maximintegrated.com/en/ds/MAX31913.pdf + * https://datasheets.maximintegrated.com/en/ds/MAX31953-MAX31963.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (version 2) as + * published by the Free Software Foundation. + */ + +#include <linux/bitmap.h> +#include <linux/crc8.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/spi/spi.h> + +enum max3191x_mode { + STATUS_BYTE_ENABLED, + STATUS_BYTE_DISABLED, +}; + +/** + * struct max3191x_chip - max3191x daisy-chain + * @gpio: GPIO controller struct + * @lock: protects read sequences + * @nchips: number of chips in the daisy-chain + * @mode: current mode, 0 for 16-bit, 1 for 8-bit; + * for simplicity, all chips in the daisy-chain are assumed + * to use the same mode + * @modesel_pins: GPIO pins to configure modesel of each chip + * @fault_pins: GPIO pins to detect fault of each chip + * @db0_pins: GPIO pins to configure debounce of each chip + * @db1_pins: GPIO pins to configure debounce of each chip + * @mesg: SPI message to perform a readout + * @xfer: SPI transfer used by @mesg + * @crc_error: bitmap signaling CRC error for each chip + * @overtemp: bitmap signaling overtemperature alarm for each chip + * @undervolt1: bitmap signaling undervoltage alarm for each chip + * @undervolt2: bitmap signaling undervoltage warning for each chip + * @fault: bitmap signaling assertion of @fault_pins for each chip + * @ignore_uv: whether to ignore undervoltage alarms; + * set by a device property if the chips are powered through + * 5VOUT instead of VCC24V, in which case they will constantly + * signal undervoltage; + * for simplicity, all chips in the daisy-chain are assumed + * to be powered the same way + */ +struct max3191x_chip { + struct gpio_chip gpio; + struct mutex lock; + u32 nchips; + enum max3191x_mode mode; + struct gpio_descs *modesel_pins; + struct gpio_descs *fault_pins; + struct gpio_descs *db0_pins; + struct gpio_descs *db1_pins; + struct spi_message mesg; + struct spi_transfer xfer; + unsigned long *crc_error; + unsigned long *overtemp; + unsigned long *undervolt1; + unsigned long *undervolt2; + unsigned long *fault; + bool ignore_uv; +}; + +#define MAX3191X_NGPIO 8 +#define MAX3191X_CRC8_POLYNOMIAL 0xa8 /* (x^5) + x^4 + x^2 + x^0 */ + +DECLARE_CRC8_TABLE(max3191x_crc8); + +static int max3191x_get_direction(struct gpio_chip *gpio, unsigned int offset) +{ + return 1; /* always in */ +} + +static int max3191x_direction_input(struct gpio_chip *gpio, unsigned int offset) +{ + return 0; +} + +static int max3191x_direction_output(struct gpio_chip *gpio, + unsigned int offset, int value) +{ + return -EINVAL; +} + +static void max3191x_set(struct gpio_chip *gpio, unsigned int offset, int value) +{ } + +static void max3191x_set_multiple(struct gpio_chip *gpio, unsigned long *mask, + unsigned long *bits) +{ } + +static unsigned int max3191x_wordlen(struct max3191x_chip *max3191x) +{ + return max3191x->mode == STATUS_BYTE_ENABLED ? 2 : 1; +} + +static int max3191x_readout_locked(struct max3191x_chip *max3191x) +{ + struct device *dev = max3191x->gpio.parent; + struct spi_device *spi = to_spi_device(dev); + int val, i, ot = 0, uv1 = 0; + + val = spi_sync(spi, &max3191x->mesg); + if (val) { + dev_err_ratelimited(dev, "SPI receive error %d\n", val); + return val; + } + + for (i = 0; i < max3191x->nchips; i++) { + if (max3191x->mode == STATUS_BYTE_ENABLED) { + u8 in = ((u8 *)max3191x->xfer.rx_buf)[i * 2]; + u8 status = ((u8 *)max3191x->xfer.rx_buf)[i * 2 + 1]; + + val = (status & 0xf8) != crc8(max3191x_crc8, &in, 1, 0); + __assign_bit(i, max3191x->crc_error, val); + if (val) + dev_err_ratelimited(dev, + "chip %d: CRC error\n", i); + + ot = (status >> 1) & 1; + __assign_bit(i, max3191x->overtemp, ot); + if (ot) + dev_err_ratelimited(dev, + "chip %d: overtemperature\n", i); + + if (!max3191x->ignore_uv) { + uv1 = !((status >> 2) & 1); + __assign_bit(i, max3191x->undervolt1, uv1); + if (uv1) + dev_err_ratelimited(dev, + "chip %d: undervoltage\n", i); + + val = !(status & 1); + __assign_bit(i, max3191x->undervolt2, val); + if (val && !uv1) + dev_warn_ratelimited(dev, + "chip %d: voltage warn\n", i); + } + } + + if (max3191x->fault_pins && !max3191x->ignore_uv) { + /* fault pin shared by all chips or per chip */ + struct gpio_desc *fault_pin = + (max3191x->fault_pins->ndescs == 1) + ? max3191x->fault_pins->desc[0] + : max3191x->fault_pins->desc[i]; + + val = gpiod_get_value_cansleep(fault_pin); + if (val < 0) { + dev_err_ratelimited(dev, + "GPIO read error %d\n", val); + return val; + } + __assign_bit(i, max3191x->fault, val); + if (val && !uv1 && !ot) + dev_err_ratelimited(dev, + "chip %d: fault\n", i); + } + } + + return 0; +} + +static bool max3191x_chip_is_faulting(struct max3191x_chip *max3191x, + unsigned int chipnum) +{ + /* without status byte the only diagnostic is the fault pin */ + if (!max3191x->ignore_uv && test_bit(chipnum, max3191x->fault)) + return true; + + if (max3191x->mode == STATUS_BYTE_DISABLED) + return false; + + return test_bit(chipnum, max3191x->crc_error) || + test_bit(chipnum, max3191x->overtemp) || + (!max3191x->ignore_uv && + test_bit(chipnum, max3191x->undervolt1)); +} + +static int max3191x_get(struct gpio_chip *gpio, unsigned int offset) +{ + struct max3191x_chip *max3191x = gpiochip_get_data(gpio); + int ret, chipnum, wordlen = max3191x_wordlen(max3191x); + u8 in; + + mutex_lock(&max3191x->lock); + ret = max3191x_readout_locked(max3191x); + if (ret) + goto out_unlock; + + chipnum = offset / MAX3191X_NGPIO; + if (max3191x_chip_is_faulting(max3191x, chipnum)) { + ret = -EIO; + goto out_unlock; + } + + in = ((u8 *)max3191x->xfer.rx_buf)[chipnum * wordlen]; + ret = (in >> (offset % MAX3191X_NGPIO)) & 1; + +out_unlock: + mutex_unlock(&max3191x->lock); + return ret; +} + +static int max3191x_get_multiple(struct gpio_chip *gpio, unsigned long *mask, + unsigned long *bits) +{ + struct max3191x_chip *max3191x = gpiochip_get_data(gpio); + int ret, bit = 0, wordlen = max3191x_wordlen(max3191x); + + mutex_lock(&max3191x->lock); + ret = max3191x_readout_locked(max3191x); + if (ret) + goto out_unlock; + + while ((bit = find_next_bit(mask, gpio->ngpio, bit)) != gpio->ngpio) { + unsigned int chipnum = bit / MAX3191X_NGPIO; + unsigned long in, shift, index; + + if (max3191x_chip_is_faulting(max3191x, chipnum)) { + ret = -EIO; + goto out_unlock; + } + + in = ((u8 *)max3191x->xfer.rx_buf)[chipnum * wordlen]; + shift = round_down(bit % BITS_PER_LONG, MAX3191X_NGPIO); + index = bit / BITS_PER_LONG; + bits[index] &= ~(mask[index] & (0xff << shift)); + bits[index] |= mask[index] & (in << shift); /* copy bits */ + + bit = (chipnum + 1) * MAX3191X_NGPIO; /* go to next chip */ + } + +out_unlock: + mutex_unlock(&max3191x->lock); + return ret; +} + +static int max3191x_set_config(struct gpio_chip *gpio, unsigned int offset, + unsigned long config) +{ + struct max3191x_chip *max3191x = gpiochip_get_data(gpio); + u32 debounce, chipnum, db0_val, db1_val; + + if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) + return -ENOTSUPP; + + if (!max3191x->db0_pins || !max3191x->db1_pins) + return -EINVAL; + + debounce = pinconf_to_config_argument(config); + switch (debounce) { + case 0: + db0_val = 0; + db1_val = 0; + break; + case 1 ... 25: + db0_val = 0; + db1_val = 1; + break; + case 26 ... 750: + db0_val = 1; + db1_val = 0; + break; + case 751 ... 3000: + db0_val = 1; + db1_val = 1; + break; + default: + return -EINVAL; + } + + if (max3191x->db0_pins->ndescs == 1) + chipnum = 0; /* all chips use the same pair of debounce pins */ + else + chipnum = offset / MAX3191X_NGPIO; /* per chip debounce pins */ + + mutex_lock(&max3191x->lock); + gpiod_set_value_cansleep(max3191x->db0_pins->desc[chipnum], db0_val); + gpiod_set_value_cansleep(max3191x->db1_pins->desc[chipnum], db1_val); + mutex_unlock(&max3191x->lock); + return 0; +} + +static void gpiod_set_array_single_value_cansleep(unsigned int ndescs, + struct gpio_desc **desc, + int value) +{ + int i, *values; + + values = kmalloc_array(ndescs, sizeof(*values), GFP_KERNEL); + if (!values) + return; + + for (i = 0; i < ndescs; i++) + values[i] = value; + + gpiod_set_array_value_cansleep(ndescs, desc, values); + kfree(values); +} + +static struct gpio_descs *devm_gpiod_get_array_optional_count( + struct device *dev, const char *con_id, + enum gpiod_flags flags, unsigned int expected) +{ + struct gpio_descs *descs; + int found = gpiod_count(dev, con_id); + + if (found == -ENOENT) + return NULL; + + if (found != expected && found != 1) { + dev_err(dev, "ignoring %s-gpios: found %d, expected %u or 1\n", + con_id, found, expected); + return NULL; + } + + descs = devm_gpiod_get_array_optional(dev, con_id, flags); + + if (IS_ERR(descs)) { + dev_err(dev, "failed to get %s-gpios: %ld\n", + con_id, PTR_ERR(descs)); + return NULL; + } + + return descs; +} + +static int max3191x_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct max3191x_chip *max3191x; + int n, ret; + + max3191x = devm_kzalloc(dev, sizeof(*max3191x), GFP_KERNEL); + if (!max3191x) + return -ENOMEM; + spi_set_drvdata(spi, max3191x); + + max3191x->nchips = 1; + device_property_read_u32(dev, "#daisy-chained-devices", + &max3191x->nchips); + + n = BITS_TO_LONGS(max3191x->nchips); + max3191x->crc_error = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL); + max3191x->undervolt1 = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL); + max3191x->undervolt2 = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL); + max3191x->overtemp = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL); + max3191x->fault = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL); + max3191x->xfer.rx_buf = devm_kcalloc(dev, max3191x->nchips, + 2, GFP_KERNEL); + if (!max3191x->crc_error || !max3191x->undervolt1 || + !max3191x->overtemp || !max3191x->undervolt2 || + !max3191x->fault || !max3191x->xfer.rx_buf) + return -ENOMEM; + + max3191x->modesel_pins = devm_gpiod_get_array_optional_count(dev, + "maxim,modesel", GPIOD_ASIS, max3191x->nchips); + max3191x->fault_pins = devm_gpiod_get_array_optional_count(dev, + "maxim,fault", GPIOD_IN, max3191x->nchips); + max3191x->db0_pins = devm_gpiod_get_array_optional_count(dev, + "maxim,db0", GPIOD_OUT_LOW, max3191x->nchips); + max3191x->db1_pins = devm_gpiod_get_array_optional_count(dev, + "maxim,db1", GPIOD_OUT_LOW, max3191x->nchips); + + max3191x->mode = device_property_read_bool(dev, "maxim,modesel-8bit") + ? STATUS_BYTE_DISABLED : STATUS_BYTE_ENABLED; + if (max3191x->modesel_pins) + gpiod_set_array_single_value_cansleep( + max3191x->modesel_pins->ndescs, + max3191x->modesel_pins->desc, max3191x->mode); + + max3191x->ignore_uv = device_property_read_bool(dev, + "maxim,ignore-undervoltage"); + + if (max3191x->db0_pins && max3191x->db1_pins && + max3191x->db0_pins->ndescs != max3191x->db1_pins->ndescs) { + dev_err(dev, "ignoring maxim,db*-gpios: array len mismatch\n"); + devm_gpiod_put_array(dev, max3191x->db0_pins); + devm_gpiod_put_array(dev, max3191x->db1_pins); + max3191x->db0_pins = NULL; + max3191x->db1_pins = NULL; + } + + max3191x->xfer.len = max3191x->nchips * max3191x_wordlen(max3191x); + spi_message_init_with_transfers(&max3191x->mesg, &max3191x->xfer, 1); + + max3191x->gpio.label = spi->modalias; + max3191x->gpio.owner = THIS_MODULE; + max3191x->gpio.parent = dev; + max3191x->gpio.base = -1; + max3191x->gpio.ngpio = max3191x->nchips * MAX3191X_NGPIO; + max3191x->gpio.can_sleep = true; + + max3191x->gpio.get_direction = max3191x_get_direction; + max3191x->gpio.direction_input = max3191x_direction_input; + max3191x->gpio.direction_output = max3191x_direction_output; + max3191x->gpio.set = max3191x_set; + max3191x->gpio.set_multiple = max3191x_set_multiple; + max3191x->gpio.get = max3191x_get; + max3191x->gpio.get_multiple = max3191x_get_multiple; + max3191x->gpio.set_config = max3191x_set_config; + + mutex_init(&max3191x->lock); + + ret = gpiochip_add_data(&max3191x->gpio, max3191x); + if (ret) { + mutex_destroy(&max3191x->lock); + return ret; + } + + return 0; +} + +static int max3191x_remove(struct spi_device *spi) +{ + struct max3191x_chip *max3191x = spi_get_drvdata(spi); + + gpiochip_remove(&max3191x->gpio); + mutex_destroy(&max3191x->lock); + + return 0; +} + +static int __init max3191x_register_driver(struct spi_driver *sdrv) +{ + crc8_populate_msb(max3191x_crc8, MAX3191X_CRC8_POLYNOMIAL); + return spi_register_driver(sdrv); +} + +#ifdef CONFIG_OF +static const struct of_device_id max3191x_of_id[] = { + { .compatible = "maxim,max31910" }, + { .compatible = "maxim,max31911" }, + { .compatible = "maxim,max31912" }, + { .compatible = "maxim,max31913" }, + { .compatible = "maxim,max31953" }, + { .compatible = "maxim,max31963" }, + { } +}; +MODULE_DEVICE_TABLE(of, max3191x_of_id); +#endif + +static const struct spi_device_id max3191x_spi_id[] = { + { "max31910" }, + { "max31911" }, + { "max31912" }, + { "max31913" }, + { "max31953" }, + { "max31963" }, + { } +}; +MODULE_DEVICE_TABLE(spi, max3191x_spi_id); + +static struct spi_driver max3191x_driver = { + .driver = { + .name = "max3191x", + .of_match_table = of_match_ptr(max3191x_of_id), + }, + .probe = max3191x_probe, + .remove = max3191x_remove, + .id_table = max3191x_spi_id, +}; +module_driver(max3191x_driver, max3191x_register_driver, spi_unregister_driver); + +MODULE_AUTHOR("Lukas Wunner <lukas@wunner.de>"); +MODULE_DESCRIPTION("GPIO driver for Maxim MAX3191x industrial serializer"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-max7300.c b/drivers/gpio/gpio-max7300.c new file mode 100644 index 000000000..1ae9ba851 --- /dev/null +++ b/drivers/gpio/gpio-max7300.c @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2009 Wolfram Sang, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Check max730x.c for further details. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/i2c.h> +#include <linux/spi/max7301.h> +#include <linux/slab.h> + +static int max7300_i2c_write(struct device *dev, unsigned int reg, + unsigned int val) +{ + struct i2c_client *client = to_i2c_client(dev); + + return i2c_smbus_write_byte_data(client, reg, val); +} + +static int max7300_i2c_read(struct device *dev, unsigned int reg) +{ + struct i2c_client *client = to_i2c_client(dev); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int max7300_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct max7301 *ts; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + ts = devm_kzalloc(&client->dev, sizeof(struct max7301), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + ts->read = max7300_i2c_read; + ts->write = max7300_i2c_write; + ts->dev = &client->dev; + + return __max730x_probe(ts); +} + +static int max7300_remove(struct i2c_client *client) +{ + return __max730x_remove(&client->dev); +} + +static const struct i2c_device_id max7300_id[] = { + { "max7300", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max7300_id); + +static struct i2c_driver max7300_driver = { + .driver = { + .name = "max7300", + }, + .probe = max7300_probe, + .remove = max7300_remove, + .id_table = max7300_id, +}; + +static int __init max7300_init(void) +{ + return i2c_add_driver(&max7300_driver); +} +subsys_initcall(max7300_init); + +static void __exit max7300_exit(void) +{ + i2c_del_driver(&max7300_driver); +} +module_exit(max7300_exit); + +MODULE_AUTHOR("Wolfram Sang"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MAX7300 GPIO-Expander"); diff --git a/drivers/gpio/gpio-max7301.c b/drivers/gpio/gpio-max7301.c new file mode 100644 index 000000000..647dfbbc4 --- /dev/null +++ b/drivers/gpio/gpio-max7301.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2006 Juergen Beisert, Pengutronix + * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix + * Copyright (C) 2009 Wolfram Sang, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Check max730x.c for further details. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/spi/max7301.h> + +/* A write to the MAX7301 means one message with one transfer */ +static int max7301_spi_write(struct device *dev, unsigned int reg, + unsigned int val) +{ + struct spi_device *spi = to_spi_device(dev); + u16 word = ((reg & 0x7F) << 8) | (val & 0xFF); + + return spi_write_then_read(spi, &word, sizeof(word), NULL, 0); +} + +/* A read from the MAX7301 means two transfers; here, one message each */ + +static int max7301_spi_read(struct device *dev, unsigned int reg) +{ + int ret; + u16 word; + struct spi_device *spi = to_spi_device(dev); + + word = 0x8000 | (reg << 8); + ret = spi_write_then_read(spi, &word, sizeof(word), &word, + sizeof(word)); + if (ret) + return ret; + return word & 0xff; +} + +static int max7301_probe(struct spi_device *spi) +{ + struct max7301 *ts; + int ret; + + /* bits_per_word cannot be configured in platform data */ + spi->bits_per_word = 16; + ret = spi_setup(spi); + if (ret < 0) + return ret; + + ts = devm_kzalloc(&spi->dev, sizeof(struct max7301), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + ts->read = max7301_spi_read; + ts->write = max7301_spi_write; + ts->dev = &spi->dev; + + ret = __max730x_probe(ts); + return ret; +} + +static int max7301_remove(struct spi_device *spi) +{ + return __max730x_remove(&spi->dev); +} + +static const struct spi_device_id max7301_id[] = { + { "max7301", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, max7301_id); + +static struct spi_driver max7301_driver = { + .driver = { + .name = "max7301", + }, + .probe = max7301_probe, + .remove = max7301_remove, + .id_table = max7301_id, +}; + +static int __init max7301_init(void) +{ + return spi_register_driver(&max7301_driver); +} +/* register after spi postcore initcall and before + * subsys initcalls that may rely on these GPIOs + */ +subsys_initcall(max7301_init); + +static void __exit max7301_exit(void) +{ + spi_unregister_driver(&max7301_driver); +} +module_exit(max7301_exit); + +MODULE_AUTHOR("Juergen Beisert, Wolfram Sang"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MAX7301 GPIO-Expander"); diff --git a/drivers/gpio/gpio-max730x.c b/drivers/gpio/gpio-max730x.c new file mode 100644 index 000000000..198a36b07 --- /dev/null +++ b/drivers/gpio/gpio-max730x.c @@ -0,0 +1,245 @@ +/** + * Copyright (C) 2006 Juergen Beisert, Pengutronix + * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix + * Copyright (C) 2009 Wolfram Sang, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * The Maxim MAX7300/1 device is an I2C/SPI driven GPIO expander. There are + * 28 GPIOs. 8 of them can trigger an interrupt. See datasheet for more + * details + * Note: + * - DIN must be stable at the rising edge of clock. + * - when writing: + * - always clock in 16 clocks at once + * - at DIN: D15 first, D0 last + * - D0..D7 = databyte, D8..D14 = commandbyte + * - D15 = low -> write command + * - when reading + * - always clock in 16 clocks at once + * - at DIN: D15 first, D0 last + * - D0..D7 = dummy, D8..D14 = register address + * - D15 = high -> read command + * - raise CS and assert it again + * - always clock in 16 clocks at once + * - at DOUT: D15 first, D0 last + * - D0..D7 contains the data from the first cycle + * + * The driver exports a standard gpiochip interface + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/spi/max7301.h> +#include <linux/gpio/driver.h> +#include <linux/slab.h> + +/* + * Pin configurations, see MAX7301 datasheet page 6 + */ +#define PIN_CONFIG_MASK 0x03 +#define PIN_CONFIG_IN_PULLUP 0x03 +#define PIN_CONFIG_IN_WO_PULLUP 0x02 +#define PIN_CONFIG_OUT 0x01 + +#define PIN_NUMBER 28 + +static int max7301_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct max7301 *ts = gpiochip_get_data(chip); + u8 *config; + u8 offset_bits, pin_config; + int ret; + + /* First 4 pins are unused in the controller */ + offset += 4; + offset_bits = (offset & 3) << 1; + + config = &ts->port_config[offset >> 2]; + + if (ts->input_pullup_active & BIT(offset)) + pin_config = PIN_CONFIG_IN_PULLUP; + else + pin_config = PIN_CONFIG_IN_WO_PULLUP; + + mutex_lock(&ts->lock); + + *config = (*config & ~(PIN_CONFIG_MASK << offset_bits)) + | (pin_config << offset_bits); + + ret = ts->write(ts->dev, 0x08 + (offset >> 2), *config); + + mutex_unlock(&ts->lock); + + return ret; +} + +static int __max7301_set(struct max7301 *ts, unsigned offset, int value) +{ + if (value) { + ts->out_level |= 1 << offset; + return ts->write(ts->dev, 0x20 + offset, 0x01); + } else { + ts->out_level &= ~(1 << offset); + return ts->write(ts->dev, 0x20 + offset, 0x00); + } +} + +static int max7301_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct max7301 *ts = gpiochip_get_data(chip); + u8 *config; + u8 offset_bits; + int ret; + + /* First 4 pins are unused in the controller */ + offset += 4; + offset_bits = (offset & 3) << 1; + + config = &ts->port_config[offset >> 2]; + + mutex_lock(&ts->lock); + + *config = (*config & ~(PIN_CONFIG_MASK << offset_bits)) + | (PIN_CONFIG_OUT << offset_bits); + + ret = __max7301_set(ts, offset, value); + + if (!ret) + ret = ts->write(ts->dev, 0x08 + (offset >> 2), *config); + + mutex_unlock(&ts->lock); + + return ret; +} + +static int max7301_get(struct gpio_chip *chip, unsigned offset) +{ + struct max7301 *ts = gpiochip_get_data(chip); + int config, level = -EINVAL; + + /* First 4 pins are unused in the controller */ + offset += 4; + + mutex_lock(&ts->lock); + + config = (ts->port_config[offset >> 2] >> ((offset & 3) << 1)) + & PIN_CONFIG_MASK; + + switch (config) { + case PIN_CONFIG_OUT: + /* Output: return cached level */ + level = !!(ts->out_level & (1 << offset)); + break; + case PIN_CONFIG_IN_WO_PULLUP: + case PIN_CONFIG_IN_PULLUP: + /* Input: read out */ + level = ts->read(ts->dev, 0x20 + offset) & 0x01; + } + mutex_unlock(&ts->lock); + + return level; +} + +static void max7301_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct max7301 *ts = gpiochip_get_data(chip); + + /* First 4 pins are unused in the controller */ + offset += 4; + + mutex_lock(&ts->lock); + + __max7301_set(ts, offset, value); + + mutex_unlock(&ts->lock); +} + +int __max730x_probe(struct max7301 *ts) +{ + struct device *dev = ts->dev; + struct max7301_platform_data *pdata; + int i, ret; + + pdata = dev_get_platdata(dev); + + mutex_init(&ts->lock); + dev_set_drvdata(dev, ts); + + /* Power up the chip and disable IRQ output */ + ts->write(dev, 0x04, 0x01); + + if (pdata) { + ts->input_pullup_active = pdata->input_pullup_active; + ts->chip.base = pdata->base; + } else { + ts->chip.base = -1; + } + ts->chip.label = dev->driver->name; + + ts->chip.direction_input = max7301_direction_input; + ts->chip.get = max7301_get; + ts->chip.direction_output = max7301_direction_output; + ts->chip.set = max7301_set; + + ts->chip.ngpio = PIN_NUMBER; + ts->chip.can_sleep = true; + ts->chip.parent = dev; + ts->chip.owner = THIS_MODULE; + + ret = gpiochip_add_data(&ts->chip, ts); + if (ret) + goto exit_destroy; + + /* + * initialize pullups according to platform data and cache the + * register values for later use. + */ + for (i = 1; i < 8; i++) { + int j; + /* + * initialize port_config with "0xAA", which means + * input with internal pullup disabled. This is needed + * to avoid writing zeros (in the inner for loop), + * which is not allowed according to the datasheet. + */ + ts->port_config[i] = 0xAA; + for (j = 0; j < 4; j++) { + int offset = (i - 1) * 4 + j; + ret = max7301_direction_input(&ts->chip, offset); + if (ret) + goto exit_destroy; + } + } + + return ret; + +exit_destroy: + mutex_destroy(&ts->lock); + return ret; +} +EXPORT_SYMBOL_GPL(__max730x_probe); + +int __max730x_remove(struct device *dev) +{ + struct max7301 *ts = dev_get_drvdata(dev); + + if (ts == NULL) + return -ENODEV; + + /* Power down the chip and disable IRQ output */ + ts->write(dev, 0x04, 0x00); + gpiochip_remove(&ts->chip); + mutex_destroy(&ts->lock); + return 0; +} +EXPORT_SYMBOL_GPL(__max730x_remove); + +MODULE_AUTHOR("Juergen Beisert, Wolfram Sang"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MAX730x GPIO-Expanders, generic parts"); diff --git a/drivers/gpio/gpio-max732x.c b/drivers/gpio/gpio-max732x.c new file mode 100644 index 000000000..f03cb0ba7 --- /dev/null +++ b/drivers/gpio/gpio-max732x.c @@ -0,0 +1,780 @@ +/* + * MAX732x I2C Port Expander with 8/16 I/O + * + * Copyright (C) 2007 Marvell International Ltd. + * Copyright (C) 2008 Jack Ren <jack.ren@marvell.com> + * Copyright (C) 2008 Eric Miao <eric.miao@marvell.com> + * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org> + * + * Derived from drivers/gpio/pca953x.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/platform_data/max732x.h> +#include <linux/of.h> + + +/* + * Each port of MAX732x (including MAX7319) falls into one of the + * following three types: + * + * - Push Pull Output + * - Input + * - Open Drain I/O + * + * designated by 'O', 'I' and 'P' individually according to MAXIM's + * datasheets. 'I' and 'P' ports are interrupt capables, some with + * a dedicated interrupt mask. + * + * There are two groups of I/O ports, each group usually includes + * up to 8 I/O ports, and is accessed by a specific I2C address: + * + * - Group A : by I2C address 0b'110xxxx + * - Group B : by I2C address 0b'101xxxx + * + * where 'xxxx' is decided by the connections of pin AD2/AD0. The + * address used also affects the initial state of output signals. + * + * Within each group of ports, there are five known combinations of + * I/O ports: 4I4O, 4P4O, 8I, 8P, 8O, see the definitions below for + * the detailed organization of these ports. Only Goup A is interrupt + * capable. + * + * GPIO numbers start from 'gpio_base + 0' to 'gpio_base + 8/16', + * and GPIOs from GROUP_A are numbered before those from GROUP_B + * (if there are two groups). + * + * NOTE: MAX7328/MAX7329 are drop-in replacements for PCF8574/a, so + * they are not supported by this driver. + */ + +#define PORT_NONE 0x0 /* '/' No Port */ +#define PORT_OUTPUT 0x1 /* 'O' Push-Pull, Output Only */ +#define PORT_INPUT 0x2 /* 'I' Input Only */ +#define PORT_OPENDRAIN 0x3 /* 'P' Open-Drain, I/O */ + +#define IO_4I4O 0x5AA5 /* O7 O6 I5 I4 I3 I2 O1 O0 */ +#define IO_4P4O 0x5FF5 /* O7 O6 P5 P4 P3 P2 O1 O0 */ +#define IO_8I 0xAAAA /* I7 I6 I5 I4 I3 I2 I1 I0 */ +#define IO_8P 0xFFFF /* P7 P6 P5 P4 P3 P2 P1 P0 */ +#define IO_8O 0x5555 /* O7 O6 O5 O4 O3 O2 O1 O0 */ + +#define GROUP_A(x) ((x) & 0xffff) /* I2C Addr: 0b'110xxxx */ +#define GROUP_B(x) ((x) << 16) /* I2C Addr: 0b'101xxxx */ + +#define INT_NONE 0x0 /* No interrupt capability */ +#define INT_NO_MASK 0x1 /* Has interrupts, no mask */ +#define INT_INDEP_MASK 0x2 /* Has interrupts, independent mask */ +#define INT_MERGED_MASK 0x3 /* Has interrupts, merged mask */ + +#define INT_CAPS(x) (((uint64_t)(x)) << 32) + +enum { + MAX7319, + MAX7320, + MAX7321, + MAX7322, + MAX7323, + MAX7324, + MAX7325, + MAX7326, + MAX7327, +}; + +static uint64_t max732x_features[] = { + [MAX7319] = GROUP_A(IO_8I) | INT_CAPS(INT_MERGED_MASK), + [MAX7320] = GROUP_B(IO_8O), + [MAX7321] = GROUP_A(IO_8P) | INT_CAPS(INT_NO_MASK), + [MAX7322] = GROUP_A(IO_4I4O) | INT_CAPS(INT_MERGED_MASK), + [MAX7323] = GROUP_A(IO_4P4O) | INT_CAPS(INT_INDEP_MASK), + [MAX7324] = GROUP_A(IO_8I) | GROUP_B(IO_8O) | INT_CAPS(INT_MERGED_MASK), + [MAX7325] = GROUP_A(IO_8P) | GROUP_B(IO_8O) | INT_CAPS(INT_NO_MASK), + [MAX7326] = GROUP_A(IO_4I4O) | GROUP_B(IO_8O) | INT_CAPS(INT_MERGED_MASK), + [MAX7327] = GROUP_A(IO_4P4O) | GROUP_B(IO_8O) | INT_CAPS(INT_NO_MASK), +}; + +static const struct i2c_device_id max732x_id[] = { + { "max7319", MAX7319 }, + { "max7320", MAX7320 }, + { "max7321", MAX7321 }, + { "max7322", MAX7322 }, + { "max7323", MAX7323 }, + { "max7324", MAX7324 }, + { "max7325", MAX7325 }, + { "max7326", MAX7326 }, + { "max7327", MAX7327 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, max732x_id); + +#ifdef CONFIG_OF +static const struct of_device_id max732x_of_table[] = { + { .compatible = "maxim,max7319" }, + { .compatible = "maxim,max7320" }, + { .compatible = "maxim,max7321" }, + { .compatible = "maxim,max7322" }, + { .compatible = "maxim,max7323" }, + { .compatible = "maxim,max7324" }, + { .compatible = "maxim,max7325" }, + { .compatible = "maxim,max7326" }, + { .compatible = "maxim,max7327" }, + { } +}; +MODULE_DEVICE_TABLE(of, max732x_of_table); +#endif + +struct max732x_chip { + struct gpio_chip gpio_chip; + + struct i2c_client *client; /* "main" client */ + struct i2c_client *client_dummy; + struct i2c_client *client_group_a; + struct i2c_client *client_group_b; + + unsigned int mask_group_a; + unsigned int dir_input; + unsigned int dir_output; + + struct mutex lock; + uint8_t reg_out[2]; + +#ifdef CONFIG_GPIO_MAX732X_IRQ + struct mutex irq_lock; + uint8_t irq_mask; + uint8_t irq_mask_cur; + uint8_t irq_trig_raise; + uint8_t irq_trig_fall; + uint8_t irq_features; +#endif +}; + +static int max732x_writeb(struct max732x_chip *chip, int group_a, uint8_t val) +{ + struct i2c_client *client; + int ret; + + client = group_a ? chip->client_group_a : chip->client_group_b; + ret = i2c_smbus_write_byte(client, val); + if (ret < 0) { + dev_err(&client->dev, "failed writing\n"); + return ret; + } + + return 0; +} + +static int max732x_readb(struct max732x_chip *chip, int group_a, uint8_t *val) +{ + struct i2c_client *client; + int ret; + + client = group_a ? chip->client_group_a : chip->client_group_b; + ret = i2c_smbus_read_byte(client); + if (ret < 0) { + dev_err(&client->dev, "failed reading\n"); + return ret; + } + + *val = (uint8_t)ret; + return 0; +} + +static inline int is_group_a(struct max732x_chip *chip, unsigned off) +{ + return (1u << off) & chip->mask_group_a; +} + +static int max732x_gpio_get_value(struct gpio_chip *gc, unsigned off) +{ + struct max732x_chip *chip = gpiochip_get_data(gc); + uint8_t reg_val; + int ret; + + ret = max732x_readb(chip, is_group_a(chip, off), ®_val); + if (ret < 0) + return ret; + + return !!(reg_val & (1u << (off & 0x7))); +} + +static void max732x_gpio_set_mask(struct gpio_chip *gc, unsigned off, int mask, + int val) +{ + struct max732x_chip *chip = gpiochip_get_data(gc); + uint8_t reg_out; + int ret; + + mutex_lock(&chip->lock); + + reg_out = (off > 7) ? chip->reg_out[1] : chip->reg_out[0]; + reg_out = (reg_out & ~mask) | (val & mask); + + ret = max732x_writeb(chip, is_group_a(chip, off), reg_out); + if (ret < 0) + goto out; + + /* update the shadow register then */ + if (off > 7) + chip->reg_out[1] = reg_out; + else + chip->reg_out[0] = reg_out; +out: + mutex_unlock(&chip->lock); +} + +static void max732x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val) +{ + unsigned base = off & ~0x7; + uint8_t mask = 1u << (off & 0x7); + + max732x_gpio_set_mask(gc, base, mask, val << (off & 0x7)); +} + +static void max732x_gpio_set_multiple(struct gpio_chip *gc, + unsigned long *mask, unsigned long *bits) +{ + unsigned mask_lo = mask[0] & 0xff; + unsigned mask_hi = (mask[0] >> 8) & 0xff; + + if (mask_lo) + max732x_gpio_set_mask(gc, 0, mask_lo, bits[0] & 0xff); + if (mask_hi) + max732x_gpio_set_mask(gc, 8, mask_hi, (bits[0] >> 8) & 0xff); +} + +static int max732x_gpio_direction_input(struct gpio_chip *gc, unsigned off) +{ + struct max732x_chip *chip = gpiochip_get_data(gc); + unsigned int mask = 1u << off; + + if ((mask & chip->dir_input) == 0) { + dev_dbg(&chip->client->dev, "%s port %d is output only\n", + chip->client->name, off); + return -EACCES; + } + + /* + * Open-drain pins must be set to high impedance (which is + * equivalent to output-high) to be turned into an input. + */ + if ((mask & chip->dir_output)) + max732x_gpio_set_value(gc, off, 1); + + return 0; +} + +static int max732x_gpio_direction_output(struct gpio_chip *gc, + unsigned off, int val) +{ + struct max732x_chip *chip = gpiochip_get_data(gc); + unsigned int mask = 1u << off; + + if ((mask & chip->dir_output) == 0) { + dev_dbg(&chip->client->dev, "%s port %d is input only\n", + chip->client->name, off); + return -EACCES; + } + + max732x_gpio_set_value(gc, off, val); + return 0; +} + +#ifdef CONFIG_GPIO_MAX732X_IRQ +static int max732x_writew(struct max732x_chip *chip, uint16_t val) +{ + int ret; + + val = cpu_to_le16(val); + + ret = i2c_master_send(chip->client_group_a, (char *)&val, 2); + if (ret < 0) { + dev_err(&chip->client_group_a->dev, "failed writing\n"); + return ret; + } + + return 0; +} + +static int max732x_readw(struct max732x_chip *chip, uint16_t *val) +{ + int ret; + + ret = i2c_master_recv(chip->client_group_a, (char *)val, 2); + if (ret < 0) { + dev_err(&chip->client_group_a->dev, "failed reading\n"); + return ret; + } + + *val = le16_to_cpu(*val); + return 0; +} + +static void max732x_irq_update_mask(struct max732x_chip *chip) +{ + uint16_t msg; + + if (chip->irq_mask == chip->irq_mask_cur) + return; + + chip->irq_mask = chip->irq_mask_cur; + + if (chip->irq_features == INT_NO_MASK) + return; + + mutex_lock(&chip->lock); + + switch (chip->irq_features) { + case INT_INDEP_MASK: + msg = (chip->irq_mask << 8) | chip->reg_out[0]; + max732x_writew(chip, msg); + break; + + case INT_MERGED_MASK: + msg = chip->irq_mask | chip->reg_out[0]; + max732x_writeb(chip, 1, (uint8_t)msg); + break; + } + + mutex_unlock(&chip->lock); +} + +static void max732x_irq_mask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct max732x_chip *chip = gpiochip_get_data(gc); + + chip->irq_mask_cur &= ~(1 << d->hwirq); +} + +static void max732x_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct max732x_chip *chip = gpiochip_get_data(gc); + + chip->irq_mask_cur |= 1 << d->hwirq; +} + +static void max732x_irq_bus_lock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct max732x_chip *chip = gpiochip_get_data(gc); + + mutex_lock(&chip->irq_lock); + chip->irq_mask_cur = chip->irq_mask; +} + +static void max732x_irq_bus_sync_unlock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct max732x_chip *chip = gpiochip_get_data(gc); + uint16_t new_irqs; + uint16_t level; + + max732x_irq_update_mask(chip); + + new_irqs = chip->irq_trig_fall | chip->irq_trig_raise; + while (new_irqs) { + level = __ffs(new_irqs); + max732x_gpio_direction_input(&chip->gpio_chip, level); + new_irqs &= ~(1 << level); + } + + mutex_unlock(&chip->irq_lock); +} + +static int max732x_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct max732x_chip *chip = gpiochip_get_data(gc); + uint16_t off = d->hwirq; + uint16_t mask = 1 << off; + + if (!(mask & chip->dir_input)) { + dev_dbg(&chip->client->dev, "%s port %d is output only\n", + chip->client->name, off); + return -EACCES; + } + + if (!(type & IRQ_TYPE_EDGE_BOTH)) { + dev_err(&chip->client->dev, "irq %d: unsupported type %d\n", + d->irq, type); + return -EINVAL; + } + + if (type & IRQ_TYPE_EDGE_FALLING) + chip->irq_trig_fall |= mask; + else + chip->irq_trig_fall &= ~mask; + + if (type & IRQ_TYPE_EDGE_RISING) + chip->irq_trig_raise |= mask; + else + chip->irq_trig_raise &= ~mask; + + return 0; +} + +static int max732x_irq_set_wake(struct irq_data *data, unsigned int on) +{ + struct max732x_chip *chip = irq_data_get_irq_chip_data(data); + + irq_set_irq_wake(chip->client->irq, on); + return 0; +} + +static struct irq_chip max732x_irq_chip = { + .name = "max732x", + .irq_mask = max732x_irq_mask, + .irq_unmask = max732x_irq_unmask, + .irq_bus_lock = max732x_irq_bus_lock, + .irq_bus_sync_unlock = max732x_irq_bus_sync_unlock, + .irq_set_type = max732x_irq_set_type, + .irq_set_wake = max732x_irq_set_wake, +}; + +static uint8_t max732x_irq_pending(struct max732x_chip *chip) +{ + uint8_t cur_stat; + uint8_t old_stat; + uint8_t trigger; + uint8_t pending; + uint16_t status; + int ret; + + ret = max732x_readw(chip, &status); + if (ret) + return 0; + + trigger = status >> 8; + trigger &= chip->irq_mask; + + if (!trigger) + return 0; + + cur_stat = status & 0xFF; + cur_stat &= chip->irq_mask; + + old_stat = cur_stat ^ trigger; + + pending = (old_stat & chip->irq_trig_fall) | + (cur_stat & chip->irq_trig_raise); + pending &= trigger; + + return pending; +} + +static irqreturn_t max732x_irq_handler(int irq, void *devid) +{ + struct max732x_chip *chip = devid; + uint8_t pending; + uint8_t level; + + pending = max732x_irq_pending(chip); + + if (!pending) + return IRQ_HANDLED; + + do { + level = __ffs(pending); + handle_nested_irq(irq_find_mapping(chip->gpio_chip.irq.domain, + level)); + + pending &= ~(1 << level); + } while (pending); + + return IRQ_HANDLED; +} + +static int max732x_irq_setup(struct max732x_chip *chip, + const struct i2c_device_id *id) +{ + struct i2c_client *client = chip->client; + struct max732x_platform_data *pdata = dev_get_platdata(&client->dev); + int has_irq = max732x_features[id->driver_data] >> 32; + int irq_base = 0; + int ret; + + if (((pdata && pdata->irq_base) || client->irq) + && has_irq != INT_NONE) { + if (pdata) + irq_base = pdata->irq_base; + chip->irq_features = has_irq; + mutex_init(&chip->irq_lock); + + ret = devm_request_threaded_irq(&client->dev, client->irq, + NULL, max732x_irq_handler, IRQF_ONESHOT | + IRQF_TRIGGER_FALLING | IRQF_SHARED, + dev_name(&client->dev), chip); + if (ret) { + dev_err(&client->dev, "failed to request irq %d\n", + client->irq); + return ret; + } + ret = gpiochip_irqchip_add_nested(&chip->gpio_chip, + &max732x_irq_chip, + irq_base, + handle_simple_irq, + IRQ_TYPE_NONE); + if (ret) { + dev_err(&client->dev, + "could not connect irqchip to gpiochip\n"); + return ret; + } + gpiochip_set_nested_irqchip(&chip->gpio_chip, + &max732x_irq_chip, + client->irq); + } + + return 0; +} + +#else /* CONFIG_GPIO_MAX732X_IRQ */ +static int max732x_irq_setup(struct max732x_chip *chip, + const struct i2c_device_id *id) +{ + struct i2c_client *client = chip->client; + struct max732x_platform_data *pdata = dev_get_platdata(&client->dev); + int has_irq = max732x_features[id->driver_data] >> 32; + + if (((pdata && pdata->irq_base) || client->irq) && has_irq != INT_NONE) + dev_warn(&client->dev, "interrupt support not compiled in\n"); + + return 0; +} +#endif + +static int max732x_setup_gpio(struct max732x_chip *chip, + const struct i2c_device_id *id, + unsigned gpio_start) +{ + struct gpio_chip *gc = &chip->gpio_chip; + uint32_t id_data = (uint32_t)max732x_features[id->driver_data]; + int i, port = 0; + + for (i = 0; i < 16; i++, id_data >>= 2) { + unsigned int mask = 1 << port; + + switch (id_data & 0x3) { + case PORT_OUTPUT: + chip->dir_output |= mask; + break; + case PORT_INPUT: + chip->dir_input |= mask; + break; + case PORT_OPENDRAIN: + chip->dir_output |= mask; + chip->dir_input |= mask; + break; + default: + continue; + } + + if (i < 8) + chip->mask_group_a |= mask; + port++; + } + + if (chip->dir_input) + gc->direction_input = max732x_gpio_direction_input; + if (chip->dir_output) { + gc->direction_output = max732x_gpio_direction_output; + gc->set = max732x_gpio_set_value; + gc->set_multiple = max732x_gpio_set_multiple; + } + gc->get = max732x_gpio_get_value; + gc->can_sleep = true; + + gc->base = gpio_start; + gc->ngpio = port; + gc->label = chip->client->name; + gc->parent = &chip->client->dev; + gc->owner = THIS_MODULE; + + return port; +} + +static struct max732x_platform_data *of_gpio_max732x(struct device *dev) +{ + struct max732x_platform_data *pdata; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + pdata->gpio_base = -1; + + return pdata; +} + +static int max732x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct max732x_platform_data *pdata; + struct device_node *node; + struct max732x_chip *chip; + struct i2c_client *c; + uint16_t addr_a, addr_b; + int ret, nr_port; + + pdata = dev_get_platdata(&client->dev); + node = client->dev.of_node; + + if (!pdata && node) + pdata = of_gpio_max732x(&client->dev); + + if (!pdata) { + dev_dbg(&client->dev, "no platform data\n"); + return -EINVAL; + } + + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (chip == NULL) + return -ENOMEM; + chip->client = client; + + nr_port = max732x_setup_gpio(chip, id, pdata->gpio_base); + chip->gpio_chip.parent = &client->dev; + + addr_a = (client->addr & 0x0f) | 0x60; + addr_b = (client->addr & 0x0f) | 0x50; + + switch (client->addr & 0x70) { + case 0x60: + chip->client_group_a = client; + if (nr_port > 8) { + c = i2c_new_dummy(client->adapter, addr_b); + if (!c) { + dev_err(&client->dev, + "Failed to allocate I2C device\n"); + ret = -ENODEV; + goto out_failed; + } + chip->client_group_b = chip->client_dummy = c; + } + break; + case 0x50: + chip->client_group_b = client; + if (nr_port > 8) { + c = i2c_new_dummy(client->adapter, addr_a); + if (!c) { + dev_err(&client->dev, + "Failed to allocate I2C device\n"); + ret = -ENODEV; + goto out_failed; + } + chip->client_group_a = chip->client_dummy = c; + } + break; + default: + dev_err(&client->dev, "invalid I2C address specified %02x\n", + client->addr); + ret = -EINVAL; + goto out_failed; + } + + if (nr_port > 8 && !chip->client_dummy) { + dev_err(&client->dev, + "Failed to allocate second group I2C device\n"); + ret = -ENODEV; + goto out_failed; + } + + mutex_init(&chip->lock); + + ret = max732x_readb(chip, is_group_a(chip, 0), &chip->reg_out[0]); + if (ret) + goto out_failed; + if (nr_port > 8) { + ret = max732x_readb(chip, is_group_a(chip, 8), &chip->reg_out[1]); + if (ret) + goto out_failed; + } + + ret = gpiochip_add_data(&chip->gpio_chip, chip); + if (ret) + goto out_failed; + + ret = max732x_irq_setup(chip, id); + if (ret) { + gpiochip_remove(&chip->gpio_chip); + goto out_failed; + } + + if (pdata && pdata->setup) { + ret = pdata->setup(client, chip->gpio_chip.base, + chip->gpio_chip.ngpio, pdata->context); + if (ret < 0) + dev_warn(&client->dev, "setup failed, %d\n", ret); + } + + i2c_set_clientdata(client, chip); + return 0; + +out_failed: + i2c_unregister_device(chip->client_dummy); + return ret; +} + +static int max732x_remove(struct i2c_client *client) +{ + struct max732x_platform_data *pdata = dev_get_platdata(&client->dev); + struct max732x_chip *chip = i2c_get_clientdata(client); + + if (pdata && pdata->teardown) { + int ret; + + ret = pdata->teardown(client, chip->gpio_chip.base, + chip->gpio_chip.ngpio, pdata->context); + if (ret < 0) { + dev_err(&client->dev, "%s failed, %d\n", + "teardown", ret); + return ret; + } + } + + gpiochip_remove(&chip->gpio_chip); + + /* unregister any dummy i2c_client */ + i2c_unregister_device(chip->client_dummy); + + return 0; +} + +static struct i2c_driver max732x_driver = { + .driver = { + .name = "max732x", + .of_match_table = of_match_ptr(max732x_of_table), + }, + .probe = max732x_probe, + .remove = max732x_remove, + .id_table = max732x_id, +}; + +static int __init max732x_init(void) +{ + return i2c_add_driver(&max732x_driver); +} +/* register after i2c postcore initcall and before + * subsys initcalls that may rely on these GPIOs + */ +subsys_initcall(max732x_init); + +static void __exit max732x_exit(void) +{ + i2c_del_driver(&max732x_driver); +} +module_exit(max732x_exit); + +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"); +MODULE_DESCRIPTION("GPIO expander driver for MAX732X"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-max77620.c b/drivers/gpio/gpio-max77620.c new file mode 100644 index 000000000..78254ed93 --- /dev/null +++ b/drivers/gpio/gpio-max77620.c @@ -0,0 +1,310 @@ +/* + * MAXIM MAX77620 GPIO driver + * + * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/mfd/max77620.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define GPIO_REG_ADDR(offset) (MAX77620_REG_GPIO0 + offset) + +struct max77620_gpio { + struct gpio_chip gpio_chip; + struct regmap *rmap; + struct device *dev; +}; + +static const struct regmap_irq max77620_gpio_irqs[] = { + [0] = { + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE0, + .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, + .reg_offset = 0, + .type_reg_offset = 0, + }, + [1] = { + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE1, + .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, + .reg_offset = 0, + .type_reg_offset = 1, + }, + [2] = { + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE2, + .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, + .reg_offset = 0, + .type_reg_offset = 2, + }, + [3] = { + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE3, + .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, + .reg_offset = 0, + .type_reg_offset = 3, + }, + [4] = { + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE4, + .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, + .reg_offset = 0, + .type_reg_offset = 4, + }, + [5] = { + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE5, + .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, + .reg_offset = 0, + .type_reg_offset = 5, + }, + [6] = { + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE6, + .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, + .reg_offset = 0, + .type_reg_offset = 6, + }, + [7] = { + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE7, + .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, + .reg_offset = 0, + .type_reg_offset = 7, + }, +}; + +static const struct regmap_irq_chip max77620_gpio_irq_chip = { + .name = "max77620-gpio", + .irqs = max77620_gpio_irqs, + .num_irqs = ARRAY_SIZE(max77620_gpio_irqs), + .num_regs = 1, + .num_type_reg = 8, + .irq_reg_stride = 1, + .type_reg_stride = 1, + .status_base = MAX77620_REG_IRQ_LVL2_GPIO, + .type_base = MAX77620_REG_GPIO0, +}; + +static int max77620_gpio_dir_input(struct gpio_chip *gc, unsigned int offset) +{ + struct max77620_gpio *mgpio = gpiochip_get_data(gc); + int ret; + + ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset), + MAX77620_CNFG_GPIO_DIR_MASK, + MAX77620_CNFG_GPIO_DIR_INPUT); + if (ret < 0) + dev_err(mgpio->dev, "CNFG_GPIOx dir update failed: %d\n", ret); + + return ret; +} + +static int max77620_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct max77620_gpio *mgpio = gpiochip_get_data(gc); + unsigned int val; + int ret; + + ret = regmap_read(mgpio->rmap, GPIO_REG_ADDR(offset), &val); + if (ret < 0) { + dev_err(mgpio->dev, "CNFG_GPIOx read failed: %d\n", ret); + return ret; + } + + if (val & MAX77620_CNFG_GPIO_DIR_MASK) + return !!(val & MAX77620_CNFG_GPIO_INPUT_VAL_MASK); + else + return !!(val & MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK); +} + +static int max77620_gpio_dir_output(struct gpio_chip *gc, unsigned int offset, + int value) +{ + struct max77620_gpio *mgpio = gpiochip_get_data(gc); + u8 val; + int ret; + + val = (value) ? MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH : + MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW; + + ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset), + MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK, val); + if (ret < 0) { + dev_err(mgpio->dev, "CNFG_GPIOx val update failed: %d\n", ret); + return ret; + } + + ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset), + MAX77620_CNFG_GPIO_DIR_MASK, + MAX77620_CNFG_GPIO_DIR_OUTPUT); + if (ret < 0) + dev_err(mgpio->dev, "CNFG_GPIOx dir update failed: %d\n", ret); + + return ret; +} + +static int max77620_gpio_set_debounce(struct max77620_gpio *mgpio, + unsigned int offset, + unsigned int debounce) +{ + u8 val; + int ret; + + switch (debounce) { + case 0: + val = MAX77620_CNFG_GPIO_DBNC_None; + break; + case 1 ... 8000: + val = MAX77620_CNFG_GPIO_DBNC_8ms; + break; + case 8001 ... 16000: + val = MAX77620_CNFG_GPIO_DBNC_16ms; + break; + case 16001 ... 32000: + val = MAX77620_CNFG_GPIO_DBNC_32ms; + break; + default: + dev_err(mgpio->dev, "Illegal value %u\n", debounce); + return -EINVAL; + } + + ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset), + MAX77620_CNFG_GPIO_DBNC_MASK, val); + if (ret < 0) + dev_err(mgpio->dev, "CNFG_GPIOx_DBNC update failed: %d\n", ret); + + return ret; +} + +static void max77620_gpio_set(struct gpio_chip *gc, unsigned int offset, + int value) +{ + struct max77620_gpio *mgpio = gpiochip_get_data(gc); + u8 val; + int ret; + + val = (value) ? MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH : + MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW; + + ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset), + MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK, val); + if (ret < 0) + dev_err(mgpio->dev, "CNFG_GPIO_OUT update failed: %d\n", ret); +} + +static int max77620_gpio_set_config(struct gpio_chip *gc, unsigned int offset, + unsigned long config) +{ + struct max77620_gpio *mgpio = gpiochip_get_data(gc); + + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + return regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset), + MAX77620_CNFG_GPIO_DRV_MASK, + MAX77620_CNFG_GPIO_DRV_OPENDRAIN); + case PIN_CONFIG_DRIVE_PUSH_PULL: + return regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset), + MAX77620_CNFG_GPIO_DRV_MASK, + MAX77620_CNFG_GPIO_DRV_PUSHPULL); + case PIN_CONFIG_INPUT_DEBOUNCE: + return max77620_gpio_set_debounce(mgpio, offset, + pinconf_to_config_argument(config)); + default: + break; + } + + return -ENOTSUPP; +} + +static int max77620_gpio_to_irq(struct gpio_chip *gc, unsigned int offset) +{ + struct max77620_gpio *mgpio = gpiochip_get_data(gc); + struct max77620_chip *chip = dev_get_drvdata(mgpio->dev->parent); + + return regmap_irq_get_virq(chip->gpio_irq_data, offset); +} + +static int max77620_gpio_probe(struct platform_device *pdev) +{ + struct max77620_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct max77620_gpio *mgpio; + int gpio_irq; + int ret; + + gpio_irq = platform_get_irq(pdev, 0); + if (gpio_irq <= 0) { + dev_err(&pdev->dev, "GPIO irq not available %d\n", gpio_irq); + return -ENODEV; + } + + mgpio = devm_kzalloc(&pdev->dev, sizeof(*mgpio), GFP_KERNEL); + if (!mgpio) + return -ENOMEM; + + mgpio->rmap = chip->rmap; + mgpio->dev = &pdev->dev; + + mgpio->gpio_chip.label = pdev->name; + mgpio->gpio_chip.parent = &pdev->dev; + mgpio->gpio_chip.direction_input = max77620_gpio_dir_input; + mgpio->gpio_chip.get = max77620_gpio_get; + mgpio->gpio_chip.direction_output = max77620_gpio_dir_output; + mgpio->gpio_chip.set = max77620_gpio_set; + mgpio->gpio_chip.set_config = max77620_gpio_set_config; + mgpio->gpio_chip.to_irq = max77620_gpio_to_irq; + mgpio->gpio_chip.ngpio = MAX77620_GPIO_NR; + mgpio->gpio_chip.can_sleep = 1; + mgpio->gpio_chip.base = -1; +#ifdef CONFIG_OF_GPIO + mgpio->gpio_chip.of_node = pdev->dev.parent->of_node; +#endif + + platform_set_drvdata(pdev, mgpio); + + ret = devm_gpiochip_add_data(&pdev->dev, &mgpio->gpio_chip, mgpio); + if (ret < 0) { + dev_err(&pdev->dev, "gpio_init: Failed to add max77620_gpio\n"); + return ret; + } + + ret = devm_regmap_add_irq_chip(&pdev->dev, chip->rmap, gpio_irq, + IRQF_ONESHOT, -1, + &max77620_gpio_irq_chip, + &chip->gpio_irq_data); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to add gpio irq_chip %d\n", ret); + return ret; + } + + return 0; +} + +static const struct platform_device_id max77620_gpio_devtype[] = { + { .name = "max77620-gpio", }, + { .name = "max20024-gpio", }, + {}, +}; +MODULE_DEVICE_TABLE(platform, max77620_gpio_devtype); + +static struct platform_driver max77620_gpio_driver = { + .driver.name = "max77620-gpio", + .probe = max77620_gpio_probe, + .id_table = max77620_gpio_devtype, +}; + +module_platform_driver(max77620_gpio_driver); + +MODULE_DESCRIPTION("GPIO interface for MAX77620 and MAX20024 PMIC"); +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); +MODULE_AUTHOR("Chaitanya Bandi <bandik@nvidia.com>"); +MODULE_ALIAS("platform:max77620-gpio"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-mb86s7x.c b/drivers/gpio/gpio-mb86s7x.c new file mode 100644 index 000000000..3134c0d2b --- /dev/null +++ b/drivers/gpio/gpio-mb86s7x.c @@ -0,0 +1,222 @@ +/* + * linux/drivers/gpio/gpio-mb86s7x.c + * + * Copyright (C) 2015 Fujitsu Semiconductor Limited + * Copyright (C) 2015 Linaro Ltd. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/io.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/of_device.h> +#include <linux/gpio/driver.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/slab.h> + +/* + * Only first 8bits of a register correspond to each pin, + * so there are 4 registers for 32 pins. + */ +#define PDR(x) (0x0 + x / 8 * 4) +#define DDR(x) (0x10 + x / 8 * 4) +#define PFR(x) (0x20 + x / 8 * 4) + +#define OFFSET(x) BIT((x) % 8) + +struct mb86s70_gpio_chip { + struct gpio_chip gc; + void __iomem *base; + struct clk *clk; + spinlock_t lock; +}; + +static int mb86s70_gpio_request(struct gpio_chip *gc, unsigned gpio) +{ + struct mb86s70_gpio_chip *gchip = gpiochip_get_data(gc); + unsigned long flags; + u32 val; + + spin_lock_irqsave(&gchip->lock, flags); + + val = readl(gchip->base + PFR(gpio)); + val &= ~OFFSET(gpio); + writel(val, gchip->base + PFR(gpio)); + + spin_unlock_irqrestore(&gchip->lock, flags); + + return 0; +} + +static void mb86s70_gpio_free(struct gpio_chip *gc, unsigned gpio) +{ + struct mb86s70_gpio_chip *gchip = gpiochip_get_data(gc); + unsigned long flags; + u32 val; + + spin_lock_irqsave(&gchip->lock, flags); + + val = readl(gchip->base + PFR(gpio)); + val |= OFFSET(gpio); + writel(val, gchip->base + PFR(gpio)); + + spin_unlock_irqrestore(&gchip->lock, flags); +} + +static int mb86s70_gpio_direction_input(struct gpio_chip *gc, unsigned gpio) +{ + struct mb86s70_gpio_chip *gchip = gpiochip_get_data(gc); + unsigned long flags; + unsigned char val; + + spin_lock_irqsave(&gchip->lock, flags); + + val = readl(gchip->base + DDR(gpio)); + val &= ~OFFSET(gpio); + writel(val, gchip->base + DDR(gpio)); + + spin_unlock_irqrestore(&gchip->lock, flags); + + return 0; +} + +static int mb86s70_gpio_direction_output(struct gpio_chip *gc, + unsigned gpio, int value) +{ + struct mb86s70_gpio_chip *gchip = gpiochip_get_data(gc); + unsigned long flags; + unsigned char val; + + spin_lock_irqsave(&gchip->lock, flags); + + val = readl(gchip->base + PDR(gpio)); + if (value) + val |= OFFSET(gpio); + else + val &= ~OFFSET(gpio); + writel(val, gchip->base + PDR(gpio)); + + val = readl(gchip->base + DDR(gpio)); + val |= OFFSET(gpio); + writel(val, gchip->base + DDR(gpio)); + + spin_unlock_irqrestore(&gchip->lock, flags); + + return 0; +} + +static int mb86s70_gpio_get(struct gpio_chip *gc, unsigned gpio) +{ + struct mb86s70_gpio_chip *gchip = gpiochip_get_data(gc); + + return !!(readl(gchip->base + PDR(gpio)) & OFFSET(gpio)); +} + +static void mb86s70_gpio_set(struct gpio_chip *gc, unsigned gpio, int value) +{ + struct mb86s70_gpio_chip *gchip = gpiochip_get_data(gc); + unsigned long flags; + unsigned char val; + + spin_lock_irqsave(&gchip->lock, flags); + + val = readl(gchip->base + PDR(gpio)); + if (value) + val |= OFFSET(gpio); + else + val &= ~OFFSET(gpio); + writel(val, gchip->base + PDR(gpio)); + + spin_unlock_irqrestore(&gchip->lock, flags); +} + +static int mb86s70_gpio_probe(struct platform_device *pdev) +{ + struct mb86s70_gpio_chip *gchip; + struct resource *res; + int ret; + + gchip = devm_kzalloc(&pdev->dev, sizeof(*gchip), GFP_KERNEL); + if (gchip == NULL) + return -ENOMEM; + + platform_set_drvdata(pdev, gchip); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gchip->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(gchip->base)) + return PTR_ERR(gchip->base); + + gchip->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(gchip->clk)) + return PTR_ERR(gchip->clk); + + ret = clk_prepare_enable(gchip->clk); + if (ret) + return ret; + + spin_lock_init(&gchip->lock); + + gchip->gc.direction_output = mb86s70_gpio_direction_output; + gchip->gc.direction_input = mb86s70_gpio_direction_input; + gchip->gc.request = mb86s70_gpio_request; + gchip->gc.free = mb86s70_gpio_free; + gchip->gc.get = mb86s70_gpio_get; + gchip->gc.set = mb86s70_gpio_set; + gchip->gc.label = dev_name(&pdev->dev); + gchip->gc.ngpio = 32; + gchip->gc.owner = THIS_MODULE; + gchip->gc.parent = &pdev->dev; + gchip->gc.base = -1; + + ret = gpiochip_add_data(&gchip->gc, gchip); + if (ret) { + dev_err(&pdev->dev, "couldn't register gpio driver\n"); + clk_disable_unprepare(gchip->clk); + } + + return ret; +} + +static int mb86s70_gpio_remove(struct platform_device *pdev) +{ + struct mb86s70_gpio_chip *gchip = platform_get_drvdata(pdev); + + gpiochip_remove(&gchip->gc); + clk_disable_unprepare(gchip->clk); + + return 0; +} + +static const struct of_device_id mb86s70_gpio_dt_ids[] = { + { .compatible = "fujitsu,mb86s70-gpio" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mb86s70_gpio_dt_ids); + +static struct platform_driver mb86s70_gpio_driver = { + .driver = { + .name = "mb86s70-gpio", + .of_match_table = mb86s70_gpio_dt_ids, + }, + .probe = mb86s70_gpio_probe, + .remove = mb86s70_gpio_remove, +}; +module_platform_driver(mb86s70_gpio_driver); + +MODULE_DESCRIPTION("MB86S7x GPIO Driver"); +MODULE_ALIAS("platform:mb86s70-gpio"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-mc33880.c b/drivers/gpio/gpio-mc33880.c new file mode 100644 index 000000000..18a5a58d6 --- /dev/null +++ b/drivers/gpio/gpio-mc33880.c @@ -0,0 +1,188 @@ +/* + * MC33880 high-side/low-side switch GPIO driver + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Freescale MC33880 high-side/low-side switch + */ + +#include <linux/init.h> +#include <linux/mutex.h> +#include <linux/spi/spi.h> +#include <linux/spi/mc33880.h> +#include <linux/gpio/driver.h> +#include <linux/slab.h> +#include <linux/module.h> + +#define DRIVER_NAME "mc33880" + +/* + * Pin configurations, see MAX7301 datasheet page 6 + */ +#define PIN_CONFIG_MASK 0x03 +#define PIN_CONFIG_IN_PULLUP 0x03 +#define PIN_CONFIG_IN_WO_PULLUP 0x02 +#define PIN_CONFIG_OUT 0x01 + +#define PIN_NUMBER 8 + + +/* + * Some registers must be read back to modify. + * To save time we cache them here in memory + */ +struct mc33880 { + struct mutex lock; /* protect from simultaneous accesses */ + u8 port_config; + struct gpio_chip chip; + struct spi_device *spi; +}; + +static int mc33880_write_config(struct mc33880 *mc) +{ + return spi_write(mc->spi, &mc->port_config, sizeof(mc->port_config)); +} + + +static int __mc33880_set(struct mc33880 *mc, unsigned offset, int value) +{ + if (value) + mc->port_config |= 1 << offset; + else + mc->port_config &= ~(1 << offset); + + return mc33880_write_config(mc); +} + + +static void mc33880_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct mc33880 *mc = gpiochip_get_data(chip); + + mutex_lock(&mc->lock); + + __mc33880_set(mc, offset, value); + + mutex_unlock(&mc->lock); +} + +static int mc33880_probe(struct spi_device *spi) +{ + struct mc33880 *mc; + struct mc33880_platform_data *pdata; + int ret; + + pdata = dev_get_platdata(&spi->dev); + if (!pdata || !pdata->base) { + dev_dbg(&spi->dev, "incorrect or missing platform data\n"); + return -EINVAL; + } + + /* + * bits_per_word cannot be configured in platform data + */ + spi->bits_per_word = 8; + + ret = spi_setup(spi); + if (ret < 0) + return ret; + + mc = devm_kzalloc(&spi->dev, sizeof(struct mc33880), GFP_KERNEL); + if (!mc) + return -ENOMEM; + + mutex_init(&mc->lock); + + spi_set_drvdata(spi, mc); + + mc->spi = spi; + + mc->chip.label = DRIVER_NAME, + mc->chip.set = mc33880_set; + mc->chip.base = pdata->base; + mc->chip.ngpio = PIN_NUMBER; + mc->chip.can_sleep = true; + mc->chip.parent = &spi->dev; + mc->chip.owner = THIS_MODULE; + + mc->port_config = 0x00; + /* write twice, because during initialisation the first setting + * is just for testing SPI communication, and the second is the + * "real" configuration + */ + ret = mc33880_write_config(mc); + mc->port_config = 0x00; + if (!ret) + ret = mc33880_write_config(mc); + + if (ret) { + dev_err(&spi->dev, "Failed writing to " DRIVER_NAME ": %d\n", + ret); + goto exit_destroy; + } + + ret = gpiochip_add_data(&mc->chip, mc); + if (ret) + goto exit_destroy; + + return ret; + +exit_destroy: + mutex_destroy(&mc->lock); + return ret; +} + +static int mc33880_remove(struct spi_device *spi) +{ + struct mc33880 *mc; + + mc = spi_get_drvdata(spi); + if (!mc) + return -ENODEV; + + gpiochip_remove(&mc->chip); + mutex_destroy(&mc->lock); + + return 0; +} + +static struct spi_driver mc33880_driver = { + .driver = { + .name = DRIVER_NAME, + }, + .probe = mc33880_probe, + .remove = mc33880_remove, +}; + +static int __init mc33880_init(void) +{ + return spi_register_driver(&mc33880_driver); +} +/* register after spi postcore initcall and before + * subsys initcalls that may rely on these GPIOs + */ +subsys_initcall(mc33880_init); + +static void __exit mc33880_exit(void) +{ + spi_unregister_driver(&mc33880_driver); +} +module_exit(mc33880_exit); + +MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>"); +MODULE_LICENSE("GPL v2"); + diff --git a/drivers/gpio/gpio-mc9s08dz60.c b/drivers/gpio/gpio-mc9s08dz60.c new file mode 100644 index 000000000..d8d846d21 --- /dev/null +++ b/drivers/gpio/gpio-mc9s08dz60.c @@ -0,0 +1,121 @@ +/* + * Copyright 2009-2012 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Author: Wu Guoxing <b39297@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/gpio/driver.h> + +#define GPIO_GROUP_NUM 2 +#define GPIO_NUM_PER_GROUP 8 +#define GPIO_NUM (GPIO_GROUP_NUM*GPIO_NUM_PER_GROUP) + +struct mc9s08dz60 { + struct i2c_client *client; + struct gpio_chip chip; +}; + +static void mc9s_gpio_to_reg_and_bit(int offset, u8 *reg, u8 *bit) +{ + *reg = 0x20 + offset / GPIO_NUM_PER_GROUP; + *bit = offset % GPIO_NUM_PER_GROUP; +} + +static int mc9s08dz60_get_value(struct gpio_chip *gc, unsigned offset) +{ + u8 reg, bit; + s32 value; + struct mc9s08dz60 *mc9s = gpiochip_get_data(gc); + + mc9s_gpio_to_reg_and_bit(offset, ®, &bit); + value = i2c_smbus_read_byte_data(mc9s->client, reg); + + return (value >= 0) ? (value >> bit) & 0x1 : 0; +} + +static int mc9s08dz60_set(struct mc9s08dz60 *mc9s, unsigned offset, int val) +{ + u8 reg, bit; + s32 value; + + mc9s_gpio_to_reg_and_bit(offset, ®, &bit); + value = i2c_smbus_read_byte_data(mc9s->client, reg); + if (value >= 0) { + if (val) + value |= 1 << bit; + else + value &= ~(1 << bit); + + return i2c_smbus_write_byte_data(mc9s->client, reg, value); + } else + return value; + +} + + +static void mc9s08dz60_set_value(struct gpio_chip *gc, unsigned offset, int val) +{ + struct mc9s08dz60 *mc9s = gpiochip_get_data(gc); + + mc9s08dz60_set(mc9s, offset, val); +} + +static int mc9s08dz60_direction_output(struct gpio_chip *gc, + unsigned offset, int val) +{ + struct mc9s08dz60 *mc9s = gpiochip_get_data(gc); + + return mc9s08dz60_set(mc9s, offset, val); +} + +static int mc9s08dz60_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mc9s08dz60 *mc9s; + + mc9s = devm_kzalloc(&client->dev, sizeof(*mc9s), GFP_KERNEL); + if (!mc9s) + return -ENOMEM; + + mc9s->chip.label = client->name; + mc9s->chip.base = -1; + mc9s->chip.parent = &client->dev; + mc9s->chip.owner = THIS_MODULE; + mc9s->chip.ngpio = GPIO_NUM; + mc9s->chip.can_sleep = true; + mc9s->chip.get = mc9s08dz60_get_value; + mc9s->chip.set = mc9s08dz60_set_value; + mc9s->chip.direction_output = mc9s08dz60_direction_output; + mc9s->client = client; + i2c_set_clientdata(client, mc9s); + + return devm_gpiochip_add_data(&client->dev, &mc9s->chip, mc9s); +} + +static const struct i2c_device_id mc9s08dz60_id[] = { + {"mc9s08dz60", 0}, + {}, +}; + +static struct i2c_driver mc9s08dz60_i2c_driver = { + .driver = { + .name = "mc9s08dz60", + }, + .probe = mc9s08dz60_probe, + .id_table = mc9s08dz60_id, +}; +builtin_i2c_driver(mc9s08dz60_i2c_driver); diff --git a/drivers/gpio/gpio-menz127.c b/drivers/gpio/gpio-menz127.c new file mode 100644 index 000000000..b26353265 --- /dev/null +++ b/drivers/gpio/gpio-menz127.c @@ -0,0 +1,216 @@ +/* + * MEN 16Z127 GPIO driver + * + * Copyright (C) 2016 MEN Mikroelektronik GmbH (www.men.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/mcb.h> +#include <linux/bitops.h> +#include <linux/gpio/driver.h> + +#define MEN_Z127_CTRL 0x00 +#define MEN_Z127_PSR 0x04 +#define MEN_Z127_IRQR 0x08 +#define MEN_Z127_GPIODR 0x0c +#define MEN_Z127_IER1 0x10 +#define MEN_Z127_IER2 0x14 +#define MEN_Z127_DBER 0x18 +#define MEN_Z127_ODER 0x1C +#define GPIO_TO_DBCNT_REG(gpio) ((gpio * 4) + 0x80) + +#define MEN_Z127_DB_MIN_US 50 +/* 16 bit compare register. Each bit represents 50us */ +#define MEN_Z127_DB_MAX_US (0xffff * MEN_Z127_DB_MIN_US) +#define MEN_Z127_DB_IN_RANGE(db) ((db >= MEN_Z127_DB_MIN_US) && \ + (db <= MEN_Z127_DB_MAX_US)) + +struct men_z127_gpio { + struct gpio_chip gc; + void __iomem *reg_base; + struct resource *mem; +}; + +static int men_z127_debounce(struct gpio_chip *gc, unsigned gpio, + unsigned debounce) +{ + struct men_z127_gpio *priv = gpiochip_get_data(gc); + struct device *dev = gc->parent; + unsigned int rnd; + u32 db_en, db_cnt; + + if (!MEN_Z127_DB_IN_RANGE(debounce)) { + dev_err(dev, "debounce value %u out of range", debounce); + return -EINVAL; + } + + if (debounce > 0) { + /* round up or down depending on MSB-1 */ + rnd = fls(debounce) - 1; + + if (rnd && (debounce & BIT(rnd - 1))) + debounce = roundup(debounce, MEN_Z127_DB_MIN_US); + else + debounce = rounddown(debounce, MEN_Z127_DB_MIN_US); + + if (debounce > MEN_Z127_DB_MAX_US) + debounce = MEN_Z127_DB_MAX_US; + + /* 50us per register unit */ + debounce /= 50; + } + + spin_lock(&gc->bgpio_lock); + + db_en = readl(priv->reg_base + MEN_Z127_DBER); + + if (debounce == 0) { + db_en &= ~BIT(gpio); + db_cnt = 0; + } else { + db_en |= BIT(gpio); + db_cnt = debounce; + } + + writel(db_en, priv->reg_base + MEN_Z127_DBER); + writel(db_cnt, priv->reg_base + GPIO_TO_DBCNT_REG(gpio)); + + spin_unlock(&gc->bgpio_lock); + + return 0; +} + +static int men_z127_set_single_ended(struct gpio_chip *gc, + unsigned offset, + enum pin_config_param param) +{ + struct men_z127_gpio *priv = gpiochip_get_data(gc); + u32 od_en; + + spin_lock(&gc->bgpio_lock); + od_en = readl(priv->reg_base + MEN_Z127_ODER); + + if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN) + od_en |= BIT(offset); + else + /* Implicitly PIN_CONFIG_DRIVE_PUSH_PULL */ + od_en &= ~BIT(offset); + + writel(od_en, priv->reg_base + MEN_Z127_ODER); + spin_unlock(&gc->bgpio_lock); + + return 0; +} + +static int men_z127_set_config(struct gpio_chip *gc, unsigned offset, + unsigned long config) +{ + enum pin_config_param param = pinconf_to_config_param(config); + + switch (param) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + case PIN_CONFIG_DRIVE_PUSH_PULL: + return men_z127_set_single_ended(gc, offset, param); + + case PIN_CONFIG_INPUT_DEBOUNCE: + return men_z127_debounce(gc, offset, + pinconf_to_config_argument(config)); + + default: + break; + } + + return -ENOTSUPP; +} + +static int men_z127_probe(struct mcb_device *mdev, + const struct mcb_device_id *id) +{ + struct men_z127_gpio *men_z127_gpio; + struct device *dev = &mdev->dev; + int ret; + + men_z127_gpio = devm_kzalloc(dev, sizeof(struct men_z127_gpio), + GFP_KERNEL); + if (!men_z127_gpio) + return -ENOMEM; + + men_z127_gpio->mem = mcb_request_mem(mdev, dev_name(dev)); + if (IS_ERR(men_z127_gpio->mem)) { + dev_err(dev, "failed to request device memory"); + return PTR_ERR(men_z127_gpio->mem); + } + + men_z127_gpio->reg_base = ioremap(men_z127_gpio->mem->start, + resource_size(men_z127_gpio->mem)); + if (men_z127_gpio->reg_base == NULL) { + ret = -ENXIO; + goto err_release; + } + + mcb_set_drvdata(mdev, men_z127_gpio); + + ret = bgpio_init(&men_z127_gpio->gc, &mdev->dev, 4, + men_z127_gpio->reg_base + MEN_Z127_PSR, + men_z127_gpio->reg_base + MEN_Z127_CTRL, + NULL, + men_z127_gpio->reg_base + MEN_Z127_GPIODR, + NULL, 0); + if (ret) + goto err_unmap; + + men_z127_gpio->gc.set_config = men_z127_set_config; + + ret = gpiochip_add_data(&men_z127_gpio->gc, men_z127_gpio); + if (ret) { + dev_err(dev, "failed to register MEN 16Z127 GPIO controller"); + goto err_unmap; + } + + dev_info(dev, "MEN 16Z127 GPIO driver registered"); + + return 0; + +err_unmap: + iounmap(men_z127_gpio->reg_base); +err_release: + mcb_release_mem(men_z127_gpio->mem); + return ret; +} + +static void men_z127_remove(struct mcb_device *mdev) +{ + struct men_z127_gpio *men_z127_gpio = mcb_get_drvdata(mdev); + + gpiochip_remove(&men_z127_gpio->gc); + iounmap(men_z127_gpio->reg_base); + mcb_release_mem(men_z127_gpio->mem); +} + +static const struct mcb_device_id men_z127_ids[] = { + { .device = 0x7f }, + { } +}; +MODULE_DEVICE_TABLE(mcb, men_z127_ids); + +static struct mcb_driver men_z127_driver = { + .driver = { + .name = "z127-gpio", + }, + .probe = men_z127_probe, + .remove = men_z127_remove, + .id_table = men_z127_ids, +}; +module_mcb_driver(men_z127_driver); + +MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>"); +MODULE_DESCRIPTION("MEN 16z127 GPIO Controller"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("mcb:16z127"); diff --git a/drivers/gpio/gpio-merrifield.c b/drivers/gpio/gpio-merrifield.c new file mode 100644 index 000000000..97421bd4a --- /dev/null +++ b/drivers/gpio/gpio-merrifield.c @@ -0,0 +1,493 @@ +/* + * Intel Merrifield SoC GPIO driver + * + * Copyright (c) 2016 Intel Corporation. + * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/bitops.h> +#include <linux/gpio/driver.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/pinctrl/consumer.h> + +#define GCCR 0x000 /* controller configuration */ +#define GPLR 0x004 /* pin level r/o */ +#define GPDR 0x01c /* pin direction */ +#define GPSR 0x034 /* pin set w/o */ +#define GPCR 0x04c /* pin clear w/o */ +#define GRER 0x064 /* rising edge detect */ +#define GFER 0x07c /* falling edge detect */ +#define GFBR 0x094 /* glitch filter bypass */ +#define GIMR 0x0ac /* interrupt mask */ +#define GISR 0x0c4 /* interrupt source */ +#define GITR 0x300 /* input type */ +#define GLPR 0x318 /* level input polarity */ +#define GWMR 0x400 /* wake mask */ +#define GWSR 0x418 /* wake source */ +#define GSIR 0xc00 /* secure input */ + +/* Intel Merrifield has 192 GPIO pins */ +#define MRFLD_NGPIO 192 + +struct mrfld_gpio_pinrange { + unsigned int gpio_base; + unsigned int pin_base; + unsigned int npins; +}; + +#define GPIO_PINRANGE(gstart, gend, pstart) \ + { \ + .gpio_base = (gstart), \ + .pin_base = (pstart), \ + .npins = (gend) - (gstart) + 1, \ + } + +struct mrfld_gpio { + struct gpio_chip chip; + void __iomem *reg_base; + raw_spinlock_t lock; + struct device *dev; +}; + +static const struct mrfld_gpio_pinrange mrfld_gpio_ranges[] = { + GPIO_PINRANGE(0, 11, 146), + GPIO_PINRANGE(12, 13, 144), + GPIO_PINRANGE(14, 15, 35), + GPIO_PINRANGE(16, 16, 164), + GPIO_PINRANGE(17, 18, 105), + GPIO_PINRANGE(19, 22, 101), + GPIO_PINRANGE(23, 30, 107), + GPIO_PINRANGE(32, 43, 67), + GPIO_PINRANGE(44, 63, 195), + GPIO_PINRANGE(64, 67, 140), + GPIO_PINRANGE(68, 69, 165), + GPIO_PINRANGE(70, 71, 65), + GPIO_PINRANGE(72, 76, 228), + GPIO_PINRANGE(77, 86, 37), + GPIO_PINRANGE(87, 87, 48), + GPIO_PINRANGE(88, 88, 47), + GPIO_PINRANGE(89, 96, 49), + GPIO_PINRANGE(97, 97, 34), + GPIO_PINRANGE(102, 119, 83), + GPIO_PINRANGE(120, 123, 79), + GPIO_PINRANGE(124, 135, 115), + GPIO_PINRANGE(137, 142, 158), + GPIO_PINRANGE(154, 163, 24), + GPIO_PINRANGE(164, 176, 215), + GPIO_PINRANGE(177, 189, 127), + GPIO_PINRANGE(190, 191, 178), +}; + +static void __iomem *gpio_reg(struct gpio_chip *chip, unsigned int offset, + unsigned int reg_type_offset) +{ + struct mrfld_gpio *priv = gpiochip_get_data(chip); + u8 reg = offset / 32; + + return priv->reg_base + reg_type_offset + reg * 4; +} + +static int mrfld_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + void __iomem *gplr = gpio_reg(chip, offset, GPLR); + + return !!(readl(gplr) & BIT(offset % 32)); +} + +static void mrfld_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct mrfld_gpio *priv = gpiochip_get_data(chip); + void __iomem *gpsr, *gpcr; + unsigned long flags; + + raw_spin_lock_irqsave(&priv->lock, flags); + + if (value) { + gpsr = gpio_reg(chip, offset, GPSR); + writel(BIT(offset % 32), gpsr); + } else { + gpcr = gpio_reg(chip, offset, GPCR); + writel(BIT(offset % 32), gpcr); + } + + raw_spin_unlock_irqrestore(&priv->lock, flags); +} + +static int mrfld_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct mrfld_gpio *priv = gpiochip_get_data(chip); + void __iomem *gpdr = gpio_reg(chip, offset, GPDR); + unsigned long flags; + u32 value; + + raw_spin_lock_irqsave(&priv->lock, flags); + + value = readl(gpdr); + value &= ~BIT(offset % 32); + writel(value, gpdr); + + raw_spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int mrfld_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct mrfld_gpio *priv = gpiochip_get_data(chip); + void __iomem *gpdr = gpio_reg(chip, offset, GPDR); + unsigned long flags; + + mrfld_gpio_set(chip, offset, value); + + raw_spin_lock_irqsave(&priv->lock, flags); + + value = readl(gpdr); + value |= BIT(offset % 32); + writel(value, gpdr); + + raw_spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int mrfld_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) +{ + void __iomem *gpdr = gpio_reg(chip, offset, GPDR); + + return !(readl(gpdr) & BIT(offset % 32)); +} + +static int mrfld_gpio_set_debounce(struct gpio_chip *chip, unsigned int offset, + unsigned int debounce) +{ + struct mrfld_gpio *priv = gpiochip_get_data(chip); + void __iomem *gfbr = gpio_reg(chip, offset, GFBR); + unsigned long flags; + u32 value; + + raw_spin_lock_irqsave(&priv->lock, flags); + + if (debounce) + value = readl(gfbr) & ~BIT(offset % 32); + else + value = readl(gfbr) | BIT(offset % 32); + writel(value, gfbr); + + raw_spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int mrfld_gpio_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + u32 debounce; + + if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) + return -ENOTSUPP; + + debounce = pinconf_to_config_argument(config); + return mrfld_gpio_set_debounce(chip, offset, debounce); +} + +static void mrfld_irq_ack(struct irq_data *d) +{ + struct mrfld_gpio *priv = irq_data_get_irq_chip_data(d); + u32 gpio = irqd_to_hwirq(d); + void __iomem *gisr = gpio_reg(&priv->chip, gpio, GISR); + unsigned long flags; + + raw_spin_lock_irqsave(&priv->lock, flags); + + writel(BIT(gpio % 32), gisr); + + raw_spin_unlock_irqrestore(&priv->lock, flags); +} + +static void mrfld_irq_unmask_mask(struct irq_data *d, bool unmask) +{ + struct mrfld_gpio *priv = irq_data_get_irq_chip_data(d); + u32 gpio = irqd_to_hwirq(d); + void __iomem *gimr = gpio_reg(&priv->chip, gpio, GIMR); + unsigned long flags; + u32 value; + + raw_spin_lock_irqsave(&priv->lock, flags); + + if (unmask) + value = readl(gimr) | BIT(gpio % 32); + else + value = readl(gimr) & ~BIT(gpio % 32); + writel(value, gimr); + + raw_spin_unlock_irqrestore(&priv->lock, flags); +} + +static void mrfld_irq_mask(struct irq_data *d) +{ + mrfld_irq_unmask_mask(d, false); +} + +static void mrfld_irq_unmask(struct irq_data *d) +{ + mrfld_irq_unmask_mask(d, true); +} + +static int mrfld_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct mrfld_gpio *priv = gpiochip_get_data(gc); + u32 gpio = irqd_to_hwirq(d); + void __iomem *grer = gpio_reg(&priv->chip, gpio, GRER); + void __iomem *gfer = gpio_reg(&priv->chip, gpio, GFER); + void __iomem *gitr = gpio_reg(&priv->chip, gpio, GITR); + void __iomem *glpr = gpio_reg(&priv->chip, gpio, GLPR); + unsigned long flags; + u32 value; + + raw_spin_lock_irqsave(&priv->lock, flags); + + if (type & IRQ_TYPE_EDGE_RISING) + value = readl(grer) | BIT(gpio % 32); + else + value = readl(grer) & ~BIT(gpio % 32); + writel(value, grer); + + if (type & IRQ_TYPE_EDGE_FALLING) + value = readl(gfer) | BIT(gpio % 32); + else + value = readl(gfer) & ~BIT(gpio % 32); + writel(value, gfer); + + /* + * To prevent glitches from triggering an unintended level interrupt, + * configure GLPR register first and then configure GITR. + */ + if (type & IRQ_TYPE_LEVEL_LOW) + value = readl(glpr) | BIT(gpio % 32); + else + value = readl(glpr) & ~BIT(gpio % 32); + writel(value, glpr); + + if (type & IRQ_TYPE_LEVEL_MASK) { + value = readl(gitr) | BIT(gpio % 32); + writel(value, gitr); + + irq_set_handler_locked(d, handle_level_irq); + } else if (type & IRQ_TYPE_EDGE_BOTH) { + value = readl(gitr) & ~BIT(gpio % 32); + writel(value, gitr); + + irq_set_handler_locked(d, handle_edge_irq); + } + + raw_spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int mrfld_irq_set_wake(struct irq_data *d, unsigned int on) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct mrfld_gpio *priv = gpiochip_get_data(gc); + u32 gpio = irqd_to_hwirq(d); + void __iomem *gwmr = gpio_reg(&priv->chip, gpio, GWMR); + void __iomem *gwsr = gpio_reg(&priv->chip, gpio, GWSR); + unsigned long flags; + u32 value; + + raw_spin_lock_irqsave(&priv->lock, flags); + + /* Clear the existing wake status */ + writel(BIT(gpio % 32), gwsr); + + if (on) + value = readl(gwmr) | BIT(gpio % 32); + else + value = readl(gwmr) & ~BIT(gpio % 32); + writel(value, gwmr); + + raw_spin_unlock_irqrestore(&priv->lock, flags); + + dev_dbg(priv->dev, "%sable wake for gpio %u\n", on ? "en" : "dis", gpio); + return 0; +} + +static struct irq_chip mrfld_irqchip = { + .name = "gpio-merrifield", + .irq_ack = mrfld_irq_ack, + .irq_mask = mrfld_irq_mask, + .irq_unmask = mrfld_irq_unmask, + .irq_set_type = mrfld_irq_set_type, + .irq_set_wake = mrfld_irq_set_wake, +}; + +static void mrfld_irq_handler(struct irq_desc *desc) +{ + struct gpio_chip *gc = irq_desc_get_handler_data(desc); + struct mrfld_gpio *priv = gpiochip_get_data(gc); + struct irq_chip *irqchip = irq_desc_get_chip(desc); + unsigned long base, gpio; + + chained_irq_enter(irqchip, desc); + + /* Check GPIO controller to check which pin triggered the interrupt */ + for (base = 0; base < priv->chip.ngpio; base += 32) { + void __iomem *gisr = gpio_reg(&priv->chip, base, GISR); + void __iomem *gimr = gpio_reg(&priv->chip, base, GIMR); + unsigned long pending, enabled; + + pending = readl(gisr); + enabled = readl(gimr); + + /* Only interrupts that are enabled */ + pending &= enabled; + + for_each_set_bit(gpio, &pending, 32) { + unsigned int irq; + + irq = irq_find_mapping(gc->irq.domain, base + gpio); + generic_handle_irq(irq); + } + } + + chained_irq_exit(irqchip, desc); +} + +static void mrfld_irq_init_hw(struct mrfld_gpio *priv) +{ + void __iomem *reg; + unsigned int base; + + for (base = 0; base < priv->chip.ngpio; base += 32) { + /* Clear the rising-edge detect register */ + reg = gpio_reg(&priv->chip, base, GRER); + writel(0, reg); + /* Clear the falling-edge detect register */ + reg = gpio_reg(&priv->chip, base, GFER); + writel(0, reg); + } +} + +static const char *mrfld_gpio_get_pinctrl_dev_name(void) +{ + const char *dev_name = acpi_dev_get_first_match_name("INTC1002", NULL, -1); + return dev_name ? dev_name : "pinctrl-merrifield"; +} + +static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + const struct mrfld_gpio_pinrange *range; + const char *pinctrl_dev_name; + struct mrfld_gpio *priv; + u32 gpio_base, irq_base; + void __iomem *base; + unsigned int i; + int retval; + + retval = pcim_enable_device(pdev); + if (retval) + return retval; + + retval = pcim_iomap_regions(pdev, BIT(1) | BIT(0), pci_name(pdev)); + if (retval) { + dev_err(&pdev->dev, "I/O memory mapping error\n"); + return retval; + } + + base = pcim_iomap_table(pdev)[1]; + + irq_base = readl(base); + gpio_base = readl(sizeof(u32) + base); + + /* Release the IO mapping, since we already get the info from BAR1 */ + pcim_iounmap_regions(pdev, BIT(1)); + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &pdev->dev; + priv->reg_base = pcim_iomap_table(pdev)[0]; + + priv->chip.label = dev_name(&pdev->dev); + priv->chip.parent = &pdev->dev; + priv->chip.request = gpiochip_generic_request; + priv->chip.free = gpiochip_generic_free; + priv->chip.direction_input = mrfld_gpio_direction_input; + priv->chip.direction_output = mrfld_gpio_direction_output; + priv->chip.get = mrfld_gpio_get; + priv->chip.set = mrfld_gpio_set; + priv->chip.get_direction = mrfld_gpio_get_direction; + priv->chip.set_config = mrfld_gpio_set_config; + priv->chip.base = gpio_base; + priv->chip.ngpio = MRFLD_NGPIO; + priv->chip.can_sleep = false; + + raw_spin_lock_init(&priv->lock); + + pci_set_drvdata(pdev, priv); + retval = devm_gpiochip_add_data(&pdev->dev, &priv->chip, priv); + if (retval) { + dev_err(&pdev->dev, "gpiochip_add error %d\n", retval); + return retval; + } + + pinctrl_dev_name = mrfld_gpio_get_pinctrl_dev_name(); + for (i = 0; i < ARRAY_SIZE(mrfld_gpio_ranges); i++) { + range = &mrfld_gpio_ranges[i]; + retval = gpiochip_add_pin_range(&priv->chip, + pinctrl_dev_name, + range->gpio_base, + range->pin_base, + range->npins); + if (retval) { + dev_err(&pdev->dev, "failed to add GPIO pin range\n"); + return retval; + } + } + + retval = gpiochip_irqchip_add(&priv->chip, &mrfld_irqchip, irq_base, + handle_bad_irq, IRQ_TYPE_NONE); + if (retval) { + dev_err(&pdev->dev, "could not connect irqchip to gpiochip\n"); + return retval; + } + + mrfld_irq_init_hw(priv); + + gpiochip_set_chained_irqchip(&priv->chip, &mrfld_irqchip, pdev->irq, + mrfld_irq_handler); + + return 0; +} + +static const struct pci_device_id mrfld_gpio_ids[] = { + { PCI_VDEVICE(INTEL, 0x1199) }, + { } +}; +MODULE_DEVICE_TABLE(pci, mrfld_gpio_ids); + +static struct pci_driver mrfld_gpio_driver = { + .name = "gpio-merrifield", + .id_table = mrfld_gpio_ids, + .probe = mrfld_gpio_probe, +}; + +module_pci_driver(mrfld_gpio_driver); + +MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>"); +MODULE_DESCRIPTION("Intel Merrifield SoC GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c new file mode 100644 index 000000000..0c076dce9 --- /dev/null +++ b/drivers/gpio/gpio-ml-ioh.c @@ -0,0 +1,609 @@ +/* + * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#define IOH_EDGE_FALLING 0 +#define IOH_EDGE_RISING BIT(0) +#define IOH_LEVEL_L BIT(1) +#define IOH_LEVEL_H (BIT(0) | BIT(1)) +#define IOH_EDGE_BOTH BIT(2) +#define IOH_IM_MASK (BIT(0) | BIT(1) | BIT(2)) + +#define IOH_IRQ_BASE 0 + +struct ioh_reg_comn { + u32 ien; + u32 istatus; + u32 idisp; + u32 iclr; + u32 imask; + u32 imaskclr; + u32 po; + u32 pi; + u32 pm; + u32 im_0; + u32 im_1; + u32 reserved; +}; + +struct ioh_regs { + struct ioh_reg_comn regs[8]; + u32 reserve1[16]; + u32 ioh_sel_reg[4]; + u32 reserve2[11]; + u32 srst; +}; + +/** + * struct ioh_gpio_reg_data - The register store data. + * @ien_reg To store contents of interrupt enable register. + * @imask_reg: To store contents of interrupt mask regist + * @po_reg: To store contents of PO register. + * @pm_reg: To store contents of PM register. + * @im0_reg: To store contents of interrupt mode regist0 + * @im1_reg: To store contents of interrupt mode regist1 + * @use_sel_reg: To store contents of GPIO_USE_SEL0~3 + */ +struct ioh_gpio_reg_data { + u32 ien_reg; + u32 imask_reg; + u32 po_reg; + u32 pm_reg; + u32 im0_reg; + u32 im1_reg; + u32 use_sel_reg; +}; + +/** + * struct ioh_gpio - GPIO private data structure. + * @base: PCI base address of Memory mapped I/O register. + * @reg: Memory mapped IOH GPIO register list. + * @dev: Pointer to device structure. + * @gpio: Data for GPIO infrastructure. + * @ioh_gpio_reg: Memory mapped Register data is saved here + * when suspend. + * @gpio_use_sel: Save GPIO_USE_SEL1~4 register for PM + * @ch: Indicate GPIO channel + * @irq_base: Save base of IRQ number for interrupt + * @spinlock: Used for register access protection + */ +struct ioh_gpio { + void __iomem *base; + struct ioh_regs __iomem *reg; + struct device *dev; + struct gpio_chip gpio; + struct ioh_gpio_reg_data ioh_gpio_reg; + u32 gpio_use_sel; + int ch; + int irq_base; + spinlock_t spinlock; +}; + +static const int num_ports[] = {6, 12, 16, 16, 15, 16, 16, 12}; + +static void ioh_gpio_set(struct gpio_chip *gpio, unsigned nr, int val) +{ + u32 reg_val; + struct ioh_gpio *chip = gpiochip_get_data(gpio); + unsigned long flags; + + spin_lock_irqsave(&chip->spinlock, flags); + reg_val = ioread32(&chip->reg->regs[chip->ch].po); + if (val) + reg_val |= (1 << nr); + else + reg_val &= ~(1 << nr); + + iowrite32(reg_val, &chip->reg->regs[chip->ch].po); + spin_unlock_irqrestore(&chip->spinlock, flags); +} + +static int ioh_gpio_get(struct gpio_chip *gpio, unsigned nr) +{ + struct ioh_gpio *chip = gpiochip_get_data(gpio); + + return !!(ioread32(&chip->reg->regs[chip->ch].pi) & (1 << nr)); +} + +static int ioh_gpio_direction_output(struct gpio_chip *gpio, unsigned nr, + int val) +{ + struct ioh_gpio *chip = gpiochip_get_data(gpio); + u32 pm; + u32 reg_val; + unsigned long flags; + + spin_lock_irqsave(&chip->spinlock, flags); + pm = ioread32(&chip->reg->regs[chip->ch].pm) & + ((1 << num_ports[chip->ch]) - 1); + pm |= (1 << nr); + iowrite32(pm, &chip->reg->regs[chip->ch].pm); + + reg_val = ioread32(&chip->reg->regs[chip->ch].po); + if (val) + reg_val |= (1 << nr); + else + reg_val &= ~(1 << nr); + iowrite32(reg_val, &chip->reg->regs[chip->ch].po); + + spin_unlock_irqrestore(&chip->spinlock, flags); + + return 0; +} + +static int ioh_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) +{ + struct ioh_gpio *chip = gpiochip_get_data(gpio); + u32 pm; + unsigned long flags; + + spin_lock_irqsave(&chip->spinlock, flags); + pm = ioread32(&chip->reg->regs[chip->ch].pm) & + ((1 << num_ports[chip->ch]) - 1); + pm &= ~(1 << nr); + iowrite32(pm, &chip->reg->regs[chip->ch].pm); + spin_unlock_irqrestore(&chip->spinlock, flags); + + return 0; +} + +#ifdef CONFIG_PM +/* + * Save register configuration and disable interrupts. + */ +static void ioh_gpio_save_reg_conf(struct ioh_gpio *chip) +{ + int i; + + for (i = 0; i < 8; i ++, chip++) { + chip->ioh_gpio_reg.po_reg = + ioread32(&chip->reg->regs[chip->ch].po); + chip->ioh_gpio_reg.pm_reg = + ioread32(&chip->reg->regs[chip->ch].pm); + chip->ioh_gpio_reg.ien_reg = + ioread32(&chip->reg->regs[chip->ch].ien); + chip->ioh_gpio_reg.imask_reg = + ioread32(&chip->reg->regs[chip->ch].imask); + chip->ioh_gpio_reg.im0_reg = + ioread32(&chip->reg->regs[chip->ch].im_0); + chip->ioh_gpio_reg.im1_reg = + ioread32(&chip->reg->regs[chip->ch].im_1); + if (i < 4) + chip->ioh_gpio_reg.use_sel_reg = + ioread32(&chip->reg->ioh_sel_reg[i]); + } +} + +/* + * This function restores the register configuration of the GPIO device. + */ +static void ioh_gpio_restore_reg_conf(struct ioh_gpio *chip) +{ + int i; + + for (i = 0; i < 8; i ++, chip++) { + iowrite32(chip->ioh_gpio_reg.po_reg, + &chip->reg->regs[chip->ch].po); + iowrite32(chip->ioh_gpio_reg.pm_reg, + &chip->reg->regs[chip->ch].pm); + iowrite32(chip->ioh_gpio_reg.ien_reg, + &chip->reg->regs[chip->ch].ien); + iowrite32(chip->ioh_gpio_reg.imask_reg, + &chip->reg->regs[chip->ch].imask); + iowrite32(chip->ioh_gpio_reg.im0_reg, + &chip->reg->regs[chip->ch].im_0); + iowrite32(chip->ioh_gpio_reg.im1_reg, + &chip->reg->regs[chip->ch].im_1); + if (i < 4) + iowrite32(chip->ioh_gpio_reg.use_sel_reg, + &chip->reg->ioh_sel_reg[i]); + } +} +#endif + +static int ioh_gpio_to_irq(struct gpio_chip *gpio, unsigned offset) +{ + struct ioh_gpio *chip = gpiochip_get_data(gpio); + return chip->irq_base + offset; +} + +static void ioh_gpio_setup(struct ioh_gpio *chip, int num_port) +{ + struct gpio_chip *gpio = &chip->gpio; + + gpio->label = dev_name(chip->dev); + gpio->owner = THIS_MODULE; + gpio->direction_input = ioh_gpio_direction_input; + gpio->get = ioh_gpio_get; + gpio->direction_output = ioh_gpio_direction_output; + gpio->set = ioh_gpio_set; + gpio->dbg_show = NULL; + gpio->base = -1; + gpio->ngpio = num_port; + gpio->can_sleep = false; + gpio->to_irq = ioh_gpio_to_irq; +} + +static int ioh_irq_type(struct irq_data *d, unsigned int type) +{ + u32 im; + void __iomem *im_reg; + u32 ien; + u32 im_pos; + int ch; + unsigned long flags; + u32 val; + int irq = d->irq; + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct ioh_gpio *chip = gc->private; + + ch = irq - chip->irq_base; + if (irq <= chip->irq_base + 7) { + im_reg = &chip->reg->regs[chip->ch].im_0; + im_pos = ch; + } else { + im_reg = &chip->reg->regs[chip->ch].im_1; + im_pos = ch - 8; + } + dev_dbg(chip->dev, "%s:irq=%d type=%d ch=%d pos=%d type=%d\n", + __func__, irq, type, ch, im_pos, type); + + spin_lock_irqsave(&chip->spinlock, flags); + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + val = IOH_EDGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + val = IOH_EDGE_FALLING; + break; + case IRQ_TYPE_EDGE_BOTH: + val = IOH_EDGE_BOTH; + break; + case IRQ_TYPE_LEVEL_HIGH: + val = IOH_LEVEL_H; + break; + case IRQ_TYPE_LEVEL_LOW: + val = IOH_LEVEL_L; + break; + case IRQ_TYPE_PROBE: + goto end; + default: + dev_warn(chip->dev, "%s: unknown type(%dd)", + __func__, type); + goto end; + } + + /* Set interrupt mode */ + im = ioread32(im_reg) & ~(IOH_IM_MASK << (im_pos * 4)); + iowrite32(im | (val << (im_pos * 4)), im_reg); + + /* iclr */ + iowrite32(BIT(ch), &chip->reg->regs[chip->ch].iclr); + + /* IMASKCLR */ + iowrite32(BIT(ch), &chip->reg->regs[chip->ch].imaskclr); + + /* Enable interrupt */ + ien = ioread32(&chip->reg->regs[chip->ch].ien); + iowrite32(ien | BIT(ch), &chip->reg->regs[chip->ch].ien); +end: + spin_unlock_irqrestore(&chip->spinlock, flags); + + return 0; +} + +static void ioh_irq_unmask(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct ioh_gpio *chip = gc->private; + + iowrite32(1 << (d->irq - chip->irq_base), + &chip->reg->regs[chip->ch].imaskclr); +} + +static void ioh_irq_mask(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct ioh_gpio *chip = gc->private; + + iowrite32(1 << (d->irq - chip->irq_base), + &chip->reg->regs[chip->ch].imask); +} + +static void ioh_irq_disable(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct ioh_gpio *chip = gc->private; + unsigned long flags; + u32 ien; + + spin_lock_irqsave(&chip->spinlock, flags); + ien = ioread32(&chip->reg->regs[chip->ch].ien); + ien &= ~(1 << (d->irq - chip->irq_base)); + iowrite32(ien, &chip->reg->regs[chip->ch].ien); + spin_unlock_irqrestore(&chip->spinlock, flags); +} + +static void ioh_irq_enable(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct ioh_gpio *chip = gc->private; + unsigned long flags; + u32 ien; + + spin_lock_irqsave(&chip->spinlock, flags); + ien = ioread32(&chip->reg->regs[chip->ch].ien); + ien |= 1 << (d->irq - chip->irq_base); + iowrite32(ien, &chip->reg->regs[chip->ch].ien); + spin_unlock_irqrestore(&chip->spinlock, flags); +} + +static irqreturn_t ioh_gpio_handler(int irq, void *dev_id) +{ + struct ioh_gpio *chip = dev_id; + u32 reg_val; + int i, j; + int ret = IRQ_NONE; + + for (i = 0; i < 8; i++, chip++) { + reg_val = ioread32(&chip->reg->regs[i].istatus); + for (j = 0; j < num_ports[i]; j++) { + if (reg_val & BIT(j)) { + dev_dbg(chip->dev, + "%s:[%d]:irq=%d status=0x%x\n", + __func__, j, irq, reg_val); + iowrite32(BIT(j), + &chip->reg->regs[chip->ch].iclr); + generic_handle_irq(chip->irq_base + j); + ret = IRQ_HANDLED; + } + } + } + return ret; +} + +static int ioh_gpio_alloc_generic_chip(struct ioh_gpio *chip, + unsigned int irq_start, + unsigned int num) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + int rv; + + gc = devm_irq_alloc_generic_chip(chip->dev, "ioh_gpio", 1, irq_start, + chip->base, handle_simple_irq); + if (!gc) + return -ENOMEM; + + gc->private = chip; + ct = gc->chip_types; + + ct->chip.irq_mask = ioh_irq_mask; + ct->chip.irq_unmask = ioh_irq_unmask; + ct->chip.irq_set_type = ioh_irq_type; + ct->chip.irq_disable = ioh_irq_disable; + ct->chip.irq_enable = ioh_irq_enable; + + rv = devm_irq_setup_generic_chip(chip->dev, gc, IRQ_MSK(num), + IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); + + return rv; +} + +static int ioh_gpio_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int ret; + int i, j; + struct ioh_gpio *chip; + void __iomem *base; + void *chip_save; + int irq_base; + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "%s : pci_enable_device failed", __func__); + goto err_pci_enable; + } + + ret = pci_request_regions(pdev, KBUILD_MODNAME); + if (ret) { + dev_err(&pdev->dev, "pci_request_regions failed-%d", ret); + goto err_request_regions; + } + + base = pci_iomap(pdev, 1, 0); + if (!base) { + dev_err(&pdev->dev, "%s : pci_iomap failed", __func__); + ret = -ENOMEM; + goto err_iomap; + } + + chip_save = kcalloc(8, sizeof(*chip), GFP_KERNEL); + if (chip_save == NULL) { + ret = -ENOMEM; + goto err_kzalloc; + } + + chip = chip_save; + for (i = 0; i < 8; i++, chip++) { + chip->dev = &pdev->dev; + chip->base = base; + chip->reg = chip->base; + chip->ch = i; + spin_lock_init(&chip->spinlock); + ioh_gpio_setup(chip, num_ports[i]); + ret = gpiochip_add_data(&chip->gpio, chip); + if (ret) { + dev_err(&pdev->dev, "IOH gpio: Failed to register GPIO\n"); + goto err_gpiochip_add; + } + } + + chip = chip_save; + for (j = 0; j < 8; j++, chip++) { + irq_base = devm_irq_alloc_descs(&pdev->dev, -1, IOH_IRQ_BASE, + num_ports[j], NUMA_NO_NODE); + if (irq_base < 0) { + dev_warn(&pdev->dev, + "ml_ioh_gpio: Failed to get IRQ base num\n"); + ret = irq_base; + goto err_gpiochip_add; + } + chip->irq_base = irq_base; + + ret = ioh_gpio_alloc_generic_chip(chip, + irq_base, num_ports[j]); + if (ret) + goto err_gpiochip_add; + } + + chip = chip_save; + ret = devm_request_irq(&pdev->dev, pdev->irq, ioh_gpio_handler, + IRQF_SHARED, KBUILD_MODNAME, chip); + if (ret != 0) { + dev_err(&pdev->dev, + "%s request_irq failed\n", __func__); + goto err_gpiochip_add; + } + + pci_set_drvdata(pdev, chip); + + return 0; + +err_gpiochip_add: + chip = chip_save; + while (--i >= 0) { + gpiochip_remove(&chip->gpio); + chip++; + } + kfree(chip_save); + +err_kzalloc: + pci_iounmap(pdev, base); + +err_iomap: + pci_release_regions(pdev); + +err_request_regions: + pci_disable_device(pdev); + +err_pci_enable: + + dev_err(&pdev->dev, "%s Failed returns %d\n", __func__, ret); + return ret; +} + +static void ioh_gpio_remove(struct pci_dev *pdev) +{ + int i; + struct ioh_gpio *chip = pci_get_drvdata(pdev); + void *chip_save; + + chip_save = chip; + + for (i = 0; i < 8; i++, chip++) + gpiochip_remove(&chip->gpio); + + chip = chip_save; + pci_iounmap(pdev, chip->base); + pci_release_regions(pdev); + pci_disable_device(pdev); + kfree(chip); +} + +#ifdef CONFIG_PM +static int ioh_gpio_suspend(struct pci_dev *pdev, pm_message_t state) +{ + s32 ret; + struct ioh_gpio *chip = pci_get_drvdata(pdev); + unsigned long flags; + + spin_lock_irqsave(&chip->spinlock, flags); + ioh_gpio_save_reg_conf(chip); + spin_unlock_irqrestore(&chip->spinlock, flags); + + ret = pci_save_state(pdev); + if (ret) { + dev_err(&pdev->dev, "pci_save_state Failed-%d\n", ret); + return ret; + } + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D0); + ret = pci_enable_wake(pdev, PCI_D0, 1); + if (ret) + dev_err(&pdev->dev, "pci_enable_wake Failed -%d\n", ret); + + return 0; +} + +static int ioh_gpio_resume(struct pci_dev *pdev) +{ + s32 ret; + struct ioh_gpio *chip = pci_get_drvdata(pdev); + unsigned long flags; + + ret = pci_enable_wake(pdev, PCI_D0, 0); + + pci_set_power_state(pdev, PCI_D0); + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "pci_enable_device Failed-%d ", ret); + return ret; + } + pci_restore_state(pdev); + + spin_lock_irqsave(&chip->spinlock, flags); + iowrite32(0x01, &chip->reg->srst); + iowrite32(0x00, &chip->reg->srst); + ioh_gpio_restore_reg_conf(chip); + spin_unlock_irqrestore(&chip->spinlock, flags); + + return 0; +} +#else +#define ioh_gpio_suspend NULL +#define ioh_gpio_resume NULL +#endif + +static const struct pci_device_id ioh_gpio_pcidev_id[] = { + { PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x802E) }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, ioh_gpio_pcidev_id); + +static struct pci_driver ioh_gpio_driver = { + .name = "ml_ioh_gpio", + .id_table = ioh_gpio_pcidev_id, + .probe = ioh_gpio_probe, + .remove = ioh_gpio_remove, + .suspend = ioh_gpio_suspend, + .resume = ioh_gpio_resume +}; + +module_pci_driver(ioh_gpio_driver); + +MODULE_DESCRIPTION("OKI SEMICONDUCTOR ML-IOH series GPIO Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-mm-lantiq.c b/drivers/gpio/gpio-mm-lantiq.c new file mode 100644 index 000000000..b0754fe69 --- /dev/null +++ b/drivers/gpio/gpio-mm-lantiq.c @@ -0,0 +1,161 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <john@phrozen.org> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/gpio/driver.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/io.h> +#include <linux/slab.h> + +#include <lantiq_soc.h> + +/* + * By attaching hardware latches to the EBU it is possible to create output + * only gpios. This driver configures a special memory address, which when + * written to outputs 16 bit to the latches. + */ + +#define LTQ_EBU_BUSCON 0x1e7ff /* 16 bit access, slowest timing */ +#define LTQ_EBU_WP 0x80000000 /* write protect bit */ + +struct ltq_mm { + struct of_mm_gpio_chip mmchip; + u16 shadow; /* shadow the latches state */ +}; + +/** + * ltq_mm_apply() - write the shadow value to the ebu address. + * @chip: Pointer to our private data structure. + * + * Write the shadow value to the EBU to set the gpios. We need to set the + * global EBU lock to make sure that PCI/MTD dont break. + */ +static void ltq_mm_apply(struct ltq_mm *chip) +{ + unsigned long flags; + + spin_lock_irqsave(&ebu_lock, flags); + ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1); + __raw_writew(chip->shadow, chip->mmchip.regs); + ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); + spin_unlock_irqrestore(&ebu_lock, flags); +} + +/** + * ltq_mm_set() - gpio_chip->set - set gpios. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * Set the shadow value and call ltq_mm_apply. + */ +static void ltq_mm_set(struct gpio_chip *gc, unsigned offset, int value) +{ + struct ltq_mm *chip = gpiochip_get_data(gc); + + if (value) + chip->shadow |= (1 << offset); + else + chip->shadow &= ~(1 << offset); + ltq_mm_apply(chip); +} + +/** + * ltq_mm_dir_out() - gpio_chip->dir_out - set gpio direction. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * Same as ltq_mm_set, always returns 0. + */ +static int ltq_mm_dir_out(struct gpio_chip *gc, unsigned offset, int value) +{ + ltq_mm_set(gc, offset, value); + + return 0; +} + +/** + * ltq_mm_save_regs() - Set initial values of GPIO pins + * @mm_gc: pointer to memory mapped GPIO chip structure + */ +static void ltq_mm_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct ltq_mm *chip = + container_of(mm_gc, struct ltq_mm, mmchip); + + /* tell the ebu controller which memory address we will be using */ + ltq_ebu_w32(CPHYSADDR(chip->mmchip.regs) | 0x1, LTQ_EBU_ADDRSEL1); + + ltq_mm_apply(chip); +} + +static int ltq_mm_probe(struct platform_device *pdev) +{ + struct ltq_mm *chip; + u32 shadow; + + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + platform_set_drvdata(pdev, chip); + + chip->mmchip.gc.ngpio = 16; + chip->mmchip.gc.direction_output = ltq_mm_dir_out; + chip->mmchip.gc.set = ltq_mm_set; + chip->mmchip.save_regs = ltq_mm_save_regs; + + /* store the shadow value if one was passed by the devicetree */ + if (!of_property_read_u32(pdev->dev.of_node, "lantiq,shadow", &shadow)) + chip->shadow = shadow; + + return of_mm_gpiochip_add_data(pdev->dev.of_node, &chip->mmchip, chip); +} + +static int ltq_mm_remove(struct platform_device *pdev) +{ + struct ltq_mm *chip = platform_get_drvdata(pdev); + + of_mm_gpiochip_remove(&chip->mmchip); + + return 0; +} + +static const struct of_device_id ltq_mm_match[] = { + { .compatible = "lantiq,gpio-mm" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltq_mm_match); + +static struct platform_driver ltq_mm_driver = { + .probe = ltq_mm_probe, + .remove = ltq_mm_remove, + .driver = { + .name = "gpio-mm-ltq", + .of_match_table = ltq_mm_match, + }, +}; + +static int __init ltq_mm_init(void) +{ + return platform_driver_register(<q_mm_driver); +} + +subsys_initcall(ltq_mm_init); + +static void __exit ltq_mm_exit(void) +{ + platform_driver_unregister(<q_mm_driver); +} +module_exit(ltq_mm_exit); diff --git a/drivers/gpio/gpio-mmio.c b/drivers/gpio/gpio-mmio.c new file mode 100644 index 000000000..935292a30 --- /dev/null +++ b/drivers/gpio/gpio-mmio.c @@ -0,0 +1,806 @@ +/* + * Generic driver for memory-mapped GPIO controllers. + * + * Copyright 2008 MontaVista Software, Inc. + * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * ....``.```~~~~````.`.`.`.`.```````'',,,.........`````......`....... + * ...`` ```````.. + * ..The simplest form of a GPIO controller that the driver supports is`` + * `.just a single "data" register, where GPIO state can be read and/or ` + * `,..written. ,,..``~~~~ .....``.`.`.~~.```.`.........``````.``````` + * ````````` + ___ +_/~~|___/~| . ```~~~~~~ ___/___\___ ,~.`.`.`.`````.~~...,,,,... +__________|~$@~~~ %~ /o*o*o*o*o*o\ .. Implementing such a GPIO . +o ` ~~~~\___/~~~~ ` controller in FPGA is ,.` + `....trivial..'~`.```.``` + * ``````` + * .```````~~~~`..`.``.``. + * . The driver supports `... ,..```.`~~~```````````````....````.``,, + * . big-endian notation, just`. .. A bit more sophisticated controllers , + * . register the device with -be`. .with a pair of set/clear-bit registers , + * `.. suffix. ```~~`````....`.` . affecting the data register and the .` + * ``.`.``...``` ```.. output pins are also supported.` + * ^^ `````.`````````.,``~``~``~~`````` + * . ^^ + * ,..`.`.`...````````````......`.`.`.`.`.`..`.`.`.. + * .. The expectation is that in at least some cases . ,-~~~-, + * .this will be used with roll-your-own ASIC/FPGA .` \ / + * .logic in Verilog or VHDL. ~~~`````````..`````~~` \ / + * ..````````......``````````` \o_ + * | + * ^^ / \ + * + * ...`````~~`.....``.`..........``````.`.``.```........``. + * ` 8, 16, 32 and 64 bits registers are supported, and``. + * . the number of GPIOs is determined by the width of ~ + * .. the registers. ,............```.`.`..`.`.~~~.`.`.`~ + * `.......````.``` + */ + +#include <linux/init.h> +#include <linux/err.h> +#include <linux/bug.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/compiler.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/log2.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/gpio/driver.h> +#include <linux/slab.h> +#include <linux/bitops.h> +#include <linux/platform_device.h> +#include <linux/mod_devicetable.h> +#include <linux/of.h> +#include <linux/of_device.h> + +static void bgpio_write8(void __iomem *reg, unsigned long data) +{ + writeb(data, reg); +} + +static unsigned long bgpio_read8(void __iomem *reg) +{ + return readb(reg); +} + +static void bgpio_write16(void __iomem *reg, unsigned long data) +{ + writew(data, reg); +} + +static unsigned long bgpio_read16(void __iomem *reg) +{ + return readw(reg); +} + +static void bgpio_write32(void __iomem *reg, unsigned long data) +{ + writel(data, reg); +} + +static unsigned long bgpio_read32(void __iomem *reg) +{ + return readl(reg); +} + +#if BITS_PER_LONG >= 64 +static void bgpio_write64(void __iomem *reg, unsigned long data) +{ + writeq(data, reg); +} + +static unsigned long bgpio_read64(void __iomem *reg) +{ + return readq(reg); +} +#endif /* BITS_PER_LONG >= 64 */ + +static void bgpio_write16be(void __iomem *reg, unsigned long data) +{ + iowrite16be(data, reg); +} + +static unsigned long bgpio_read16be(void __iomem *reg) +{ + return ioread16be(reg); +} + +static void bgpio_write32be(void __iomem *reg, unsigned long data) +{ + iowrite32be(data, reg); +} + +static unsigned long bgpio_read32be(void __iomem *reg) +{ + return ioread32be(reg); +} + +static unsigned long bgpio_line2mask(struct gpio_chip *gc, unsigned int line) +{ + if (gc->be_bits) + return BIT(gc->bgpio_bits - 1 - line); + return BIT(line); +} + +static int bgpio_get_set(struct gpio_chip *gc, unsigned int gpio) +{ + unsigned long pinmask = bgpio_line2mask(gc, gpio); + bool dir = !!(gc->bgpio_dir & pinmask); + + /* + * If the direction is OUT we read the value from the SET + * register, and if the direction is IN we read the value + * from the DAT register. + * + * If the direction bits are inverted, naturally this gets + * inverted too. + */ + if (gc->bgpio_dir_inverted) + dir = !dir; + + if (dir) + return !!(gc->read_reg(gc->reg_set) & pinmask); + else + return !!(gc->read_reg(gc->reg_dat) & pinmask); +} + +/* + * This assumes that the bits in the GPIO register are in native endianness. + * We only assign the function pointer if we have that. + */ +static int bgpio_get_set_multiple(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + unsigned long get_mask = 0; + unsigned long set_mask = 0; + + /* Make sure we first clear any bits that are zero when we read the register */ + *bits &= ~*mask; + + /* Exploit the fact that we know which directions are set */ + if (gc->bgpio_dir_inverted) { + set_mask = *mask & ~gc->bgpio_dir; + get_mask = *mask & gc->bgpio_dir; + } else { + set_mask = *mask & gc->bgpio_dir; + get_mask = *mask & ~gc->bgpio_dir; + } + + if (set_mask) + *bits |= gc->read_reg(gc->reg_set) & set_mask; + if (get_mask) + *bits |= gc->read_reg(gc->reg_dat) & get_mask; + + return 0; +} + +static int bgpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + return !!(gc->read_reg(gc->reg_dat) & bgpio_line2mask(gc, gpio)); +} + +/* + * This only works if the bits in the GPIO register are in native endianness. + */ +static int bgpio_get_multiple(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + /* Make sure we first clear any bits that are zero when we read the register */ + *bits &= ~*mask; + *bits |= gc->read_reg(gc->reg_dat) & *mask; + return 0; +} + +/* + * With big endian mirrored bit order it becomes more tedious. + */ +static int bgpio_get_multiple_be(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + unsigned long readmask = 0; + unsigned long val; + int bit; + + /* Make sure we first clear any bits that are zero when we read the register */ + *bits &= ~*mask; + + /* Create a mirrored mask */ + bit = -1; + while ((bit = find_next_bit(mask, gc->ngpio, bit + 1)) < gc->ngpio) + readmask |= bgpio_line2mask(gc, bit); + + /* Read the register */ + val = gc->read_reg(gc->reg_dat) & readmask; + + /* + * Mirror the result into the "bits" result, this will give line 0 + * in bit 0 ... line 31 in bit 31 for a 32bit register. + */ + bit = -1; + while ((bit = find_next_bit(&val, gc->ngpio, bit + 1)) < gc->ngpio) + *bits |= bgpio_line2mask(gc, bit); + + return 0; +} + +static void bgpio_set_none(struct gpio_chip *gc, unsigned int gpio, int val) +{ +} + +static void bgpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long mask = bgpio_line2mask(gc, gpio); + unsigned long flags; + + spin_lock_irqsave(&gc->bgpio_lock, flags); + + if (val) + gc->bgpio_data |= mask; + else + gc->bgpio_data &= ~mask; + + gc->write_reg(gc->reg_dat, gc->bgpio_data); + + spin_unlock_irqrestore(&gc->bgpio_lock, flags); +} + +static void bgpio_set_with_clear(struct gpio_chip *gc, unsigned int gpio, + int val) +{ + unsigned long mask = bgpio_line2mask(gc, gpio); + + if (val) + gc->write_reg(gc->reg_set, mask); + else + gc->write_reg(gc->reg_clr, mask); +} + +static void bgpio_set_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long mask = bgpio_line2mask(gc, gpio); + unsigned long flags; + + spin_lock_irqsave(&gc->bgpio_lock, flags); + + if (val) + gc->bgpio_data |= mask; + else + gc->bgpio_data &= ~mask; + + gc->write_reg(gc->reg_set, gc->bgpio_data); + + spin_unlock_irqrestore(&gc->bgpio_lock, flags); +} + +static void bgpio_multiple_get_masks(struct gpio_chip *gc, + unsigned long *mask, unsigned long *bits, + unsigned long *set_mask, + unsigned long *clear_mask) +{ + int i; + + *set_mask = 0; + *clear_mask = 0; + + for (i = 0; i < gc->bgpio_bits; i++) { + if (*mask == 0) + break; + if (__test_and_clear_bit(i, mask)) { + if (test_bit(i, bits)) + *set_mask |= bgpio_line2mask(gc, i); + else + *clear_mask |= bgpio_line2mask(gc, i); + } + } +} + +static void bgpio_set_multiple_single_reg(struct gpio_chip *gc, + unsigned long *mask, + unsigned long *bits, + void __iomem *reg) +{ + unsigned long flags; + unsigned long set_mask, clear_mask; + + spin_lock_irqsave(&gc->bgpio_lock, flags); + + bgpio_multiple_get_masks(gc, mask, bits, &set_mask, &clear_mask); + + gc->bgpio_data |= set_mask; + gc->bgpio_data &= ~clear_mask; + + gc->write_reg(reg, gc->bgpio_data); + + spin_unlock_irqrestore(&gc->bgpio_lock, flags); +} + +static void bgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + bgpio_set_multiple_single_reg(gc, mask, bits, gc->reg_dat); +} + +static void bgpio_set_multiple_set(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + bgpio_set_multiple_single_reg(gc, mask, bits, gc->reg_set); +} + +static void bgpio_set_multiple_with_clear(struct gpio_chip *gc, + unsigned long *mask, + unsigned long *bits) +{ + unsigned long set_mask, clear_mask; + + bgpio_multiple_get_masks(gc, mask, bits, &set_mask, &clear_mask); + + if (set_mask) + gc->write_reg(gc->reg_set, set_mask); + if (clear_mask) + gc->write_reg(gc->reg_clr, clear_mask); +} + +static int bgpio_simple_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + return 0; +} + +static int bgpio_dir_out_err(struct gpio_chip *gc, unsigned int gpio, + int val) +{ + return -EINVAL; +} + +static int bgpio_simple_dir_out(struct gpio_chip *gc, unsigned int gpio, + int val) +{ + gc->set(gc, gpio, val); + + return 0; +} + +static int bgpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + unsigned long flags; + + spin_lock_irqsave(&gc->bgpio_lock, flags); + + if (gc->bgpio_dir_inverted) + gc->bgpio_dir |= bgpio_line2mask(gc, gpio); + else + gc->bgpio_dir &= ~bgpio_line2mask(gc, gpio); + gc->write_reg(gc->reg_dir, gc->bgpio_dir); + + spin_unlock_irqrestore(&gc->bgpio_lock, flags); + + return 0; +} + +static int bgpio_get_dir(struct gpio_chip *gc, unsigned int gpio) +{ + /* Return 0 if output, 1 of input */ + if (gc->bgpio_dir_inverted) + return !!(gc->read_reg(gc->reg_dir) & bgpio_line2mask(gc, gpio)); + else + return !(gc->read_reg(gc->reg_dir) & bgpio_line2mask(gc, gpio)); +} + +static int bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + + gc->set(gc, gpio, val); + + spin_lock_irqsave(&gc->bgpio_lock, flags); + + if (gc->bgpio_dir_inverted) + gc->bgpio_dir &= ~bgpio_line2mask(gc, gpio); + else + gc->bgpio_dir |= bgpio_line2mask(gc, gpio); + gc->write_reg(gc->reg_dir, gc->bgpio_dir); + + spin_unlock_irqrestore(&gc->bgpio_lock, flags); + + return 0; +} + +static int bgpio_setup_accessors(struct device *dev, + struct gpio_chip *gc, + bool byte_be) +{ + + switch (gc->bgpio_bits) { + case 8: + gc->read_reg = bgpio_read8; + gc->write_reg = bgpio_write8; + break; + case 16: + if (byte_be) { + gc->read_reg = bgpio_read16be; + gc->write_reg = bgpio_write16be; + } else { + gc->read_reg = bgpio_read16; + gc->write_reg = bgpio_write16; + } + break; + case 32: + if (byte_be) { + gc->read_reg = bgpio_read32be; + gc->write_reg = bgpio_write32be; + } else { + gc->read_reg = bgpio_read32; + gc->write_reg = bgpio_write32; + } + break; +#if BITS_PER_LONG >= 64 + case 64: + if (byte_be) { + dev_err(dev, + "64 bit big endian byte order unsupported\n"); + return -EINVAL; + } else { + gc->read_reg = bgpio_read64; + gc->write_reg = bgpio_write64; + } + break; +#endif /* BITS_PER_LONG >= 64 */ + default: + dev_err(dev, "unsupported data width %u bits\n", gc->bgpio_bits); + return -EINVAL; + } + + return 0; +} + +/* + * Create the device and allocate the resources. For setting GPIO's there are + * three supported configurations: + * + * - single input/output register resource (named "dat"). + * - set/clear pair (named "set" and "clr"). + * - single output register resource and single input resource ("set" and + * dat"). + * + * For the single output register, this drives a 1 by setting a bit and a zero + * by clearing a bit. For the set clr pair, this drives a 1 by setting a bit + * in the set register and clears it by setting a bit in the clear register. + * The configuration is detected by which resources are present. + * + * For setting the GPIO direction, there are three supported configurations: + * + * - simple bidirection GPIO that requires no configuration. + * - an output direction register (named "dirout") where a 1 bit + * indicates the GPIO is an output. + * - an input direction register (named "dirin") where a 1 bit indicates + * the GPIO is an input. + */ +static int bgpio_setup_io(struct gpio_chip *gc, + void __iomem *dat, + void __iomem *set, + void __iomem *clr, + unsigned long flags) +{ + + gc->reg_dat = dat; + if (!gc->reg_dat) + return -EINVAL; + + if (set && clr) { + gc->reg_set = set; + gc->reg_clr = clr; + gc->set = bgpio_set_with_clear; + gc->set_multiple = bgpio_set_multiple_with_clear; + } else if (set && !clr) { + gc->reg_set = set; + gc->set = bgpio_set_set; + gc->set_multiple = bgpio_set_multiple_set; + } else if (flags & BGPIOF_NO_OUTPUT) { + gc->set = bgpio_set_none; + gc->set_multiple = NULL; + } else { + gc->set = bgpio_set; + gc->set_multiple = bgpio_set_multiple; + } + + if (!(flags & BGPIOF_UNREADABLE_REG_SET) && + (flags & BGPIOF_READ_OUTPUT_REG_SET)) { + gc->get = bgpio_get_set; + if (!gc->be_bits) + gc->get_multiple = bgpio_get_set_multiple; + /* + * We deliberately avoid assigning the ->get_multiple() call + * for big endian mirrored registers which are ALSO reflecting + * their value in the set register when used as output. It is + * simply too much complexity, let the GPIO core fall back to + * reading each line individually in that fringe case. + */ + } else { + gc->get = bgpio_get; + if (gc->be_bits) + gc->get_multiple = bgpio_get_multiple_be; + else + gc->get_multiple = bgpio_get_multiple; + } + + return 0; +} + +static int bgpio_setup_direction(struct gpio_chip *gc, + void __iomem *dirout, + void __iomem *dirin, + unsigned long flags) +{ + if (dirout && dirin) { + return -EINVAL; + } else if (dirout) { + gc->reg_dir = dirout; + gc->direction_output = bgpio_dir_out; + gc->direction_input = bgpio_dir_in; + gc->get_direction = bgpio_get_dir; + } else if (dirin) { + gc->reg_dir = dirin; + gc->direction_output = bgpio_dir_out; + gc->direction_input = bgpio_dir_in; + gc->get_direction = bgpio_get_dir; + gc->bgpio_dir_inverted = true; + } else { + if (flags & BGPIOF_NO_OUTPUT) + gc->direction_output = bgpio_dir_out_err; + else + gc->direction_output = bgpio_simple_dir_out; + gc->direction_input = bgpio_simple_dir_in; + } + + return 0; +} + +static int bgpio_request(struct gpio_chip *chip, unsigned gpio_pin) +{ + if (gpio_pin < chip->ngpio) + return 0; + + return -EINVAL; +} + +/** + * bgpio_init() - Initialize generic GPIO accessor functions + * @gc: the GPIO chip to set up + * @dev: the parent device of the new GPIO chip (compulsory) + * @sz: the size (width) of the MMIO registers in bytes, typically 1, 2 or 4 + * @dat: MMIO address for the register to READ the value of the GPIO lines, it + * is expected that a 1 in the corresponding bit in this register means the + * line is asserted + * @set: MMIO address for the register to SET the value of the GPIO lines, it is + * expected that we write the line with 1 in this register to drive the GPIO line + * high. + * @clr: MMIO address for the register to CLEAR the value of the GPIO lines, it is + * expected that we write the line with 1 in this register to drive the GPIO line + * low. It is allowed to leave this address as NULL, in that case the SET register + * will be assumed to also clear the GPIO lines, by actively writing the line + * with 0. + * @dirout: MMIO address for the register to set the line as OUTPUT. It is assumed + * that setting a line to 1 in this register will turn that line into an + * output line. Conversely, setting the line to 0 will turn that line into + * an input. Either this or @dirin can be defined, but never both. + * @dirin: MMIO address for the register to set this line as INPUT. It is assumed + * that setting a line to 1 in this register will turn that line into an + * input line. Conversely, setting the line to 0 will turn that line into + * an output. Either this or @dirout can be defined, but never both. + * @flags: Different flags that will affect the behaviour of the device, such as + * endianness etc. + */ +int bgpio_init(struct gpio_chip *gc, struct device *dev, + unsigned long sz, void __iomem *dat, void __iomem *set, + void __iomem *clr, void __iomem *dirout, void __iomem *dirin, + unsigned long flags) +{ + int ret; + + if (!is_power_of_2(sz)) + return -EINVAL; + + gc->bgpio_bits = sz * 8; + if (gc->bgpio_bits > BITS_PER_LONG) + return -EINVAL; + + spin_lock_init(&gc->bgpio_lock); + gc->parent = dev; + gc->label = dev_name(dev); + gc->base = -1; + gc->ngpio = gc->bgpio_bits; + gc->request = bgpio_request; + gc->be_bits = !!(flags & BGPIOF_BIG_ENDIAN); + + ret = bgpio_setup_io(gc, dat, set, clr, flags); + if (ret) + return ret; + + ret = bgpio_setup_accessors(dev, gc, flags & BGPIOF_BIG_ENDIAN_BYTE_ORDER); + if (ret) + return ret; + + ret = bgpio_setup_direction(gc, dirout, dirin, flags); + if (ret) + return ret; + + gc->bgpio_data = gc->read_reg(gc->reg_dat); + if (gc->set == bgpio_set_set && + !(flags & BGPIOF_UNREADABLE_REG_SET)) + gc->bgpio_data = gc->read_reg(gc->reg_set); + if (gc->reg_dir && !(flags & BGPIOF_UNREADABLE_REG_DIR)) + gc->bgpio_dir = gc->read_reg(gc->reg_dir); + + return ret; +} +EXPORT_SYMBOL_GPL(bgpio_init); + +#if IS_ENABLED(CONFIG_GPIO_GENERIC_PLATFORM) + +static void __iomem *bgpio_map(struct platform_device *pdev, + const char *name, + resource_size_t sane_sz) +{ + struct resource *r; + resource_size_t sz; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); + if (!r) + return NULL; + + sz = resource_size(r); + if (sz != sane_sz) + return IOMEM_ERR_PTR(-EINVAL); + + return devm_ioremap_resource(&pdev->dev, r); +} + +#ifdef CONFIG_OF +static const struct of_device_id bgpio_of_match[] = { + { .compatible = "brcm,bcm6345-gpio" }, + { .compatible = "wd,mbl-gpio" }, + { .compatible = "ni,169445-nand-gpio" }, + { } +}; +MODULE_DEVICE_TABLE(of, bgpio_of_match); + +static struct bgpio_pdata *bgpio_parse_dt(struct platform_device *pdev, + unsigned long *flags) +{ + struct bgpio_pdata *pdata; + + if (!of_match_device(bgpio_of_match, &pdev->dev)) + return NULL; + + pdata = devm_kzalloc(&pdev->dev, sizeof(struct bgpio_pdata), + GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + pdata->base = -1; + + if (of_device_is_big_endian(pdev->dev.of_node)) + *flags |= BGPIOF_BIG_ENDIAN_BYTE_ORDER; + + if (of_property_read_bool(pdev->dev.of_node, "no-output")) + *flags |= BGPIOF_NO_OUTPUT; + + return pdata; +} +#else +static struct bgpio_pdata *bgpio_parse_dt(struct platform_device *pdev, + unsigned long *flags) +{ + return NULL; +} +#endif /* CONFIG_OF */ + +static int bgpio_pdev_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *r; + void __iomem *dat; + void __iomem *set; + void __iomem *clr; + void __iomem *dirout; + void __iomem *dirin; + unsigned long sz; + unsigned long flags = 0; + int err; + struct gpio_chip *gc; + struct bgpio_pdata *pdata; + + pdata = bgpio_parse_dt(pdev, &flags); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + + if (!pdata) { + pdata = dev_get_platdata(dev); + flags = pdev->id_entry->driver_data; + } + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat"); + if (!r) + return -EINVAL; + + sz = resource_size(r); + + dat = bgpio_map(pdev, "dat", sz); + if (IS_ERR(dat)) + return PTR_ERR(dat); + + set = bgpio_map(pdev, "set", sz); + if (IS_ERR(set)) + return PTR_ERR(set); + + clr = bgpio_map(pdev, "clr", sz); + if (IS_ERR(clr)) + return PTR_ERR(clr); + + dirout = bgpio_map(pdev, "dirout", sz); + if (IS_ERR(dirout)) + return PTR_ERR(dirout); + + dirin = bgpio_map(pdev, "dirin", sz); + if (IS_ERR(dirin)) + return PTR_ERR(dirin); + + gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL); + if (!gc) + return -ENOMEM; + + err = bgpio_init(gc, dev, sz, dat, set, clr, dirout, dirin, flags); + if (err) + return err; + + if (pdata) { + if (pdata->label) + gc->label = pdata->label; + gc->base = pdata->base; + if (pdata->ngpio > 0) + gc->ngpio = pdata->ngpio; + } + + platform_set_drvdata(pdev, gc); + + return devm_gpiochip_add_data(&pdev->dev, gc, NULL); +} + +static const struct platform_device_id bgpio_id_table[] = { + { + .name = "basic-mmio-gpio", + .driver_data = 0, + }, { + .name = "basic-mmio-gpio-be", + .driver_data = BGPIOF_BIG_ENDIAN, + }, + { } +}; +MODULE_DEVICE_TABLE(platform, bgpio_id_table); + +static struct platform_driver bgpio_driver = { + .driver = { + .name = "basic-mmio-gpio", + .of_match_table = of_match_ptr(bgpio_of_match), + }, + .id_table = bgpio_id_table, + .probe = bgpio_pdev_probe, +}; + +module_platform_driver(bgpio_driver); + +#endif /* CONFIG_GPIO_GENERIC_PLATFORM */ + +MODULE_DESCRIPTION("Driver for basic memory-mapped GPIO controllers"); +MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c new file mode 100644 index 000000000..cab324eb7 --- /dev/null +++ b/drivers/gpio/gpio-mockup.c @@ -0,0 +1,414 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * GPIO Testing Device Driver + * + * Copyright (C) 2014 Kamlakant Patel <kamlakant.patel@broadcom.com> + * Copyright (C) 2015-2016 Bamvor Jian Zhang <bamv2005@gmail.com> + * Copyright (C) 2017 Bartosz Golaszewski <brgl@bgdev.pl> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/consumer.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irq_sim.h> +#include <linux/debugfs.h> +#include <linux/uaccess.h> + +#include "gpiolib.h" + +#define GPIO_MOCKUP_NAME "gpio-mockup" +#define GPIO_MOCKUP_MAX_GC 10 +/* + * We're storing two values per chip: the GPIO base and the number + * of GPIO lines. + */ +#define GPIO_MOCKUP_MAX_RANGES (GPIO_MOCKUP_MAX_GC * 2) + +#define gpio_mockup_err(...) pr_err(GPIO_MOCKUP_NAME ": " __VA_ARGS__) + +enum { + GPIO_MOCKUP_DIR_IN = 0, + GPIO_MOCKUP_DIR_OUT = 1, +}; + +/* + * struct gpio_pin_status - structure describing a GPIO status + * @dir: Configures direction of gpio as "in" or "out", 0=in, 1=out + * @value: Configures status of the gpio as 0(low) or 1(high) + */ +struct gpio_mockup_line_status { + int dir; + int value; +}; + +struct gpio_mockup_chip { + struct gpio_chip gc; + struct gpio_mockup_line_status *lines; + struct irq_sim irqsim; + struct dentry *dbg_dir; +}; + +struct gpio_mockup_dbgfs_private { + struct gpio_mockup_chip *chip; + struct gpio_desc *desc; + int offset; +}; + +struct gpio_mockup_platform_data { + int base; + int ngpio; + int index; + bool named_lines; +}; + +static int gpio_mockup_ranges[GPIO_MOCKUP_MAX_RANGES]; +static int gpio_mockup_num_ranges; +module_param_array(gpio_mockup_ranges, int, &gpio_mockup_num_ranges, 0400); + +static bool gpio_mockup_named_lines; +module_param_named(gpio_mockup_named_lines, + gpio_mockup_named_lines, bool, 0400); + +static struct dentry *gpio_mockup_dbg_dir; + +static int gpio_mockup_range_base(unsigned int index) +{ + return gpio_mockup_ranges[index * 2]; +} + +static int gpio_mockup_range_ngpio(unsigned int index) +{ + return gpio_mockup_ranges[index * 2 + 1]; +} + +static int gpio_mockup_get(struct gpio_chip *gc, unsigned int offset) +{ + struct gpio_mockup_chip *chip = gpiochip_get_data(gc); + + return chip->lines[offset].value; +} + +static void gpio_mockup_set(struct gpio_chip *gc, + unsigned int offset, int value) +{ + struct gpio_mockup_chip *chip = gpiochip_get_data(gc); + + chip->lines[offset].value = !!value; +} + +static void gpio_mockup_set_multiple(struct gpio_chip *gc, + unsigned long *mask, unsigned long *bits) +{ + unsigned int bit; + + for_each_set_bit(bit, mask, gc->ngpio) + gpio_mockup_set(gc, bit, test_bit(bit, bits)); + +} + +static int gpio_mockup_dirout(struct gpio_chip *gc, + unsigned int offset, int value) +{ + struct gpio_mockup_chip *chip = gpiochip_get_data(gc); + + gpio_mockup_set(gc, offset, value); + chip->lines[offset].dir = GPIO_MOCKUP_DIR_OUT; + + return 0; +} + +static int gpio_mockup_dirin(struct gpio_chip *gc, unsigned int offset) +{ + struct gpio_mockup_chip *chip = gpiochip_get_data(gc); + + chip->lines[offset].dir = GPIO_MOCKUP_DIR_IN; + + return 0; +} + +static int gpio_mockup_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + struct gpio_mockup_chip *chip = gpiochip_get_data(gc); + + return !chip->lines[offset].dir; +} + +static int gpio_mockup_to_irq(struct gpio_chip *gc, unsigned int offset) +{ + struct gpio_mockup_chip *chip = gpiochip_get_data(gc); + + return irq_sim_irqnum(&chip->irqsim, offset); +} + +static ssize_t gpio_mockup_event_write(struct file *file, + const char __user *usr_buf, + size_t size, loff_t *ppos) +{ + struct gpio_mockup_dbgfs_private *priv; + struct gpio_mockup_chip *chip; + struct seq_file *sfile; + struct gpio_desc *desc; + int rv, val; + + rv = kstrtoint_from_user(usr_buf, size, 0, &val); + if (rv) + return rv; + if (val != 0 && val != 1) + return -EINVAL; + + sfile = file->private_data; + priv = sfile->private; + desc = priv->desc; + chip = priv->chip; + + gpiod_set_value_cansleep(desc, val); + irq_sim_fire(&chip->irqsim, priv->offset); + + return size; +} + +static int gpio_mockup_event_open(struct inode *inode, struct file *file) +{ + return single_open(file, NULL, inode->i_private); +} + +static const struct file_operations gpio_mockup_event_ops = { + .owner = THIS_MODULE, + .open = gpio_mockup_event_open, + .write = gpio_mockup_event_write, + .llseek = no_llseek, +}; + +static void gpio_mockup_debugfs_setup(struct device *dev, + struct gpio_mockup_chip *chip) +{ + struct gpio_mockup_dbgfs_private *priv; + struct dentry *evfile, *link; + struct gpio_chip *gc; + const char *devname; + char *name; + int i; + + gc = &chip->gc; + devname = dev_name(&gc->gpiodev->dev); + + chip->dbg_dir = debugfs_create_dir(devname, gpio_mockup_dbg_dir); + if (IS_ERR_OR_NULL(chip->dbg_dir)) + goto err; + + link = debugfs_create_symlink(gc->label, gpio_mockup_dbg_dir, devname); + if (IS_ERR_OR_NULL(link)) + goto err; + + for (i = 0; i < gc->ngpio; i++) { + name = devm_kasprintf(dev, GFP_KERNEL, "%d", i); + if (!name) + goto err; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + goto err; + + priv->chip = chip; + priv->offset = i; + priv->desc = &gc->gpiodev->descs[i]; + + evfile = debugfs_create_file(name, 0200, chip->dbg_dir, priv, + &gpio_mockup_event_ops); + if (IS_ERR_OR_NULL(evfile)) + goto err; + } + + return; + +err: + dev_err(dev, "error creating debugfs event files\n"); +} + +static int gpio_mockup_name_lines(struct device *dev, + struct gpio_mockup_chip *chip) +{ + struct gpio_chip *gc = &chip->gc; + char **names; + int i; + + names = devm_kcalloc(dev, gc->ngpio, sizeof(char *), GFP_KERNEL); + if (!names) + return -ENOMEM; + + for (i = 0; i < gc->ngpio; i++) { + names[i] = devm_kasprintf(dev, GFP_KERNEL, + "%s-%d", gc->label, i); + if (!names[i]) + return -ENOMEM; + } + + gc->names = (const char *const *)names; + + return 0; +} + +static int gpio_mockup_probe(struct platform_device *pdev) +{ + struct gpio_mockup_platform_data *pdata; + struct gpio_mockup_chip *chip; + struct gpio_chip *gc; + int rv, base, ngpio; + struct device *dev; + char *name; + + dev = &pdev->dev; + pdata = dev_get_platdata(dev); + base = pdata->base; + ngpio = pdata->ngpio; + + chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + name = devm_kasprintf(dev, GFP_KERNEL, "%s-%c", + pdev->name, pdata->index); + if (!name) + return -ENOMEM; + + gc = &chip->gc; + gc->base = base; + gc->ngpio = ngpio; + gc->label = name; + gc->owner = THIS_MODULE; + gc->parent = dev; + gc->get = gpio_mockup_get; + gc->set = gpio_mockup_set; + gc->set_multiple = gpio_mockup_set_multiple; + gc->direction_output = gpio_mockup_dirout; + gc->direction_input = gpio_mockup_dirin; + gc->get_direction = gpio_mockup_get_direction; + gc->to_irq = gpio_mockup_to_irq; + + chip->lines = devm_kcalloc(dev, gc->ngpio, + sizeof(*chip->lines), GFP_KERNEL); + if (!chip->lines) + return -ENOMEM; + + if (pdata->named_lines) { + rv = gpio_mockup_name_lines(dev, chip); + if (rv) + return rv; + } + + rv = devm_irq_sim_init(dev, &chip->irqsim, gc->ngpio); + if (rv < 0) + return rv; + + rv = devm_gpiochip_add_data(dev, &chip->gc, chip); + if (rv) + return rv; + + if (!IS_ERR_OR_NULL(gpio_mockup_dbg_dir)) + gpio_mockup_debugfs_setup(dev, chip); + + return 0; +} + +static struct platform_driver gpio_mockup_driver = { + .driver = { + .name = GPIO_MOCKUP_NAME, + }, + .probe = gpio_mockup_probe, +}; + +static struct platform_device *gpio_mockup_pdevs[GPIO_MOCKUP_MAX_GC]; + +static void gpio_mockup_unregister_pdevs(void) +{ + struct platform_device *pdev; + int i; + + for (i = 0; i < GPIO_MOCKUP_MAX_GC; i++) { + pdev = gpio_mockup_pdevs[i]; + + if (pdev) + platform_device_unregister(pdev); + } +} + +static int __init gpio_mockup_init(void) +{ + int i, num_chips, err = 0, index = 'A'; + struct gpio_mockup_platform_data pdata; + struct platform_device *pdev; + + if ((gpio_mockup_num_ranges < 2) || + (gpio_mockup_num_ranges % 2) || + (gpio_mockup_num_ranges > GPIO_MOCKUP_MAX_RANGES)) + return -EINVAL; + + /* Each chip is described by two values. */ + num_chips = gpio_mockup_num_ranges / 2; + + /* + * The second value in the <base GPIO - number of GPIOS> pair must + * always be greater than 0. + */ + for (i = 0; i < num_chips; i++) { + if (gpio_mockup_range_ngpio(i) < 0) + return -EINVAL; + } + + gpio_mockup_dbg_dir = debugfs_create_dir("gpio-mockup-event", NULL); + if (IS_ERR_OR_NULL(gpio_mockup_dbg_dir)) + gpio_mockup_err("error creating debugfs directory\n"); + + err = platform_driver_register(&gpio_mockup_driver); + if (err) { + gpio_mockup_err("error registering platform driver\n"); + debugfs_remove_recursive(gpio_mockup_dbg_dir); + return err; + } + + for (i = 0; i < num_chips; i++) { + pdata.index = index++; + pdata.base = gpio_mockup_range_base(i); + pdata.ngpio = pdata.base < 0 + ? gpio_mockup_range_ngpio(i) + : gpio_mockup_range_ngpio(i) - pdata.base; + pdata.named_lines = gpio_mockup_named_lines; + + pdev = platform_device_register_resndata(NULL, + GPIO_MOCKUP_NAME, + i, NULL, 0, &pdata, + sizeof(pdata)); + if (IS_ERR(pdev)) { + gpio_mockup_err("error registering device"); + platform_driver_unregister(&gpio_mockup_driver); + gpio_mockup_unregister_pdevs(); + debugfs_remove_recursive(gpio_mockup_dbg_dir); + return PTR_ERR(pdev); + } + + gpio_mockup_pdevs[i] = pdev; + } + + return 0; +} + +static void __exit gpio_mockup_exit(void) +{ + debugfs_remove_recursive(gpio_mockup_dbg_dir); + platform_driver_unregister(&gpio_mockup_driver); + gpio_mockup_unregister_pdevs(); +} + +module_init(gpio_mockup_init); +module_exit(gpio_mockup_exit); + +MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>"); +MODULE_AUTHOR("Bamvor Jian Zhang <bamv2005@gmail.com>"); +MODULE_AUTHOR("Bartosz Golaszewski <brgl@bgdev.pl>"); +MODULE_DESCRIPTION("GPIO Testing driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-mpc5200.c b/drivers/gpio/gpio-mpc5200.c new file mode 100644 index 000000000..fc10cf596 --- /dev/null +++ b/drivers/gpio/gpio-mpc5200.c @@ -0,0 +1,378 @@ +/* + * MPC52xx gpio driver + * + * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/of.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/of_gpio.h> +#include <linux/io.h> +#include <linux/of_platform.h> +#include <linux/module.h> + +#include <asm/mpc52xx.h> +#include <sysdev/fsl_soc.h> + +static DEFINE_SPINLOCK(gpio_lock); + +struct mpc52xx_gpiochip { + struct of_mm_gpio_chip mmchip; + unsigned int shadow_dvo; + unsigned int shadow_gpioe; + unsigned int shadow_ddr; +}; + +/* + * GPIO LIB API implementation for wakeup GPIOs. + * + * There's a maximum of 8 wakeup GPIOs. Which of these are available + * for use depends on your board setup. + * + * 0 -> GPIO_WKUP_7 + * 1 -> GPIO_WKUP_6 + * 2 -> PSC6_1 + * 3 -> PSC6_0 + * 4 -> ETH_17 + * 5 -> PSC3_9 + * 6 -> PSC2_4 + * 7 -> PSC1_4 + * + */ +static int mpc52xx_wkup_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; + unsigned int ret; + + ret = (in_8(®s->wkup_ival) >> (7 - gpio)) & 1; + + pr_debug("%s: gpio: %d ret: %d\n", __func__, gpio, ret); + + return ret; +} + +static inline void +__mpc52xx_wkup_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = gpiochip_get_data(gc); + struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; + + if (val) + chip->shadow_dvo |= 1 << (7 - gpio); + else + chip->shadow_dvo &= ~(1 << (7 - gpio)); + + out_8(®s->wkup_dvo, chip->shadow_dvo); +} + +static void +mpc52xx_wkup_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + __mpc52xx_wkup_gpio_set(gc, gpio, val); + + spin_unlock_irqrestore(&gpio_lock, flags); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); +} + +static int mpc52xx_wkup_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = gpiochip_get_data(gc); + struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + /* set the direction */ + chip->shadow_ddr &= ~(1 << (7 - gpio)); + out_8(®s->wkup_ddr, chip->shadow_ddr); + + /* and enable the pin */ + chip->shadow_gpioe |= 1 << (7 - gpio); + out_8(®s->wkup_gpioe, chip->shadow_gpioe); + + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; +} + +static int +mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; + struct mpc52xx_gpiochip *chip = gpiochip_get_data(gc); + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + __mpc52xx_wkup_gpio_set(gc, gpio, val); + + /* Then set direction */ + chip->shadow_ddr |= 1 << (7 - gpio); + out_8(®s->wkup_ddr, chip->shadow_ddr); + + /* Finally enable the pin */ + chip->shadow_gpioe |= 1 << (7 - gpio); + out_8(®s->wkup_gpioe, chip->shadow_gpioe); + + spin_unlock_irqrestore(&gpio_lock, flags); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); + + return 0; +} + +static int mpc52xx_wkup_gpiochip_probe(struct platform_device *ofdev) +{ + struct mpc52xx_gpiochip *chip; + struct mpc52xx_gpio_wkup __iomem *regs; + struct gpio_chip *gc; + int ret; + + chip = devm_kzalloc(&ofdev->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + platform_set_drvdata(ofdev, chip); + + gc = &chip->mmchip.gc; + + gc->ngpio = 8; + gc->direction_input = mpc52xx_wkup_gpio_dir_in; + gc->direction_output = mpc52xx_wkup_gpio_dir_out; + gc->get = mpc52xx_wkup_gpio_get; + gc->set = mpc52xx_wkup_gpio_set; + + ret = of_mm_gpiochip_add_data(ofdev->dev.of_node, &chip->mmchip, chip); + if (ret) + return ret; + + regs = chip->mmchip.regs; + chip->shadow_gpioe = in_8(®s->wkup_gpioe); + chip->shadow_ddr = in_8(®s->wkup_ddr); + chip->shadow_dvo = in_8(®s->wkup_dvo); + + return 0; +} + +static int mpc52xx_gpiochip_remove(struct platform_device *ofdev) +{ + struct mpc52xx_gpiochip *chip = platform_get_drvdata(ofdev); + + of_mm_gpiochip_remove(&chip->mmchip); + + return 0; +} + +static const struct of_device_id mpc52xx_wkup_gpiochip_match[] = { + { .compatible = "fsl,mpc5200-gpio-wkup", }, + {} +}; + +static struct platform_driver mpc52xx_wkup_gpiochip_driver = { + .driver = { + .name = "mpc5200-gpio-wkup", + .of_match_table = mpc52xx_wkup_gpiochip_match, + }, + .probe = mpc52xx_wkup_gpiochip_probe, + .remove = mpc52xx_gpiochip_remove, +}; + +/* + * GPIO LIB API implementation for simple GPIOs + * + * There's a maximum of 32 simple GPIOs. Which of these are available + * for use depends on your board setup. + * The numbering reflects the bit numbering in the port registers: + * + * 0..1 > reserved + * 2..3 > IRDA + * 4..7 > ETHR + * 8..11 > reserved + * 12..15 > USB + * 16..17 > reserved + * 18..23 > PSC3 + * 24..27 > PSC2 + * 28..31 > PSC1 + */ +static int mpc52xx_simple_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpio __iomem *regs = mm_gc->regs; + unsigned int ret; + + ret = (in_be32(®s->simple_ival) >> (31 - gpio)) & 1; + + return ret; +} + +static inline void +__mpc52xx_simple_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = gpiochip_get_data(gc); + struct mpc52xx_gpio __iomem *regs = mm_gc->regs; + + if (val) + chip->shadow_dvo |= 1 << (31 - gpio); + else + chip->shadow_dvo &= ~(1 << (31 - gpio)); + out_be32(®s->simple_dvo, chip->shadow_dvo); +} + +static void +mpc52xx_simple_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + __mpc52xx_simple_gpio_set(gc, gpio, val); + + spin_unlock_irqrestore(&gpio_lock, flags); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); +} + +static int mpc52xx_simple_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = gpiochip_get_data(gc); + struct mpc52xx_gpio __iomem *regs = mm_gc->regs; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + /* set the direction */ + chip->shadow_ddr &= ~(1 << (31 - gpio)); + out_be32(®s->simple_ddr, chip->shadow_ddr); + + /* and enable the pin */ + chip->shadow_gpioe |= 1 << (31 - gpio); + out_be32(®s->simple_gpioe, chip->shadow_gpioe); + + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; +} + +static int +mpc52xx_simple_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = gpiochip_get_data(gc); + struct mpc52xx_gpio __iomem *regs = mm_gc->regs; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + /* First set initial value */ + __mpc52xx_simple_gpio_set(gc, gpio, val); + + /* Then set direction */ + chip->shadow_ddr |= 1 << (31 - gpio); + out_be32(®s->simple_ddr, chip->shadow_ddr); + + /* Finally enable the pin */ + chip->shadow_gpioe |= 1 << (31 - gpio); + out_be32(®s->simple_gpioe, chip->shadow_gpioe); + + spin_unlock_irqrestore(&gpio_lock, flags); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); + + return 0; +} + +static int mpc52xx_simple_gpiochip_probe(struct platform_device *ofdev) +{ + struct mpc52xx_gpiochip *chip; + struct gpio_chip *gc; + struct mpc52xx_gpio __iomem *regs; + int ret; + + chip = devm_kzalloc(&ofdev->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + platform_set_drvdata(ofdev, chip); + + gc = &chip->mmchip.gc; + + gc->ngpio = 32; + gc->direction_input = mpc52xx_simple_gpio_dir_in; + gc->direction_output = mpc52xx_simple_gpio_dir_out; + gc->get = mpc52xx_simple_gpio_get; + gc->set = mpc52xx_simple_gpio_set; + + ret = of_mm_gpiochip_add_data(ofdev->dev.of_node, &chip->mmchip, chip); + if (ret) + return ret; + + regs = chip->mmchip.regs; + chip->shadow_gpioe = in_be32(®s->simple_gpioe); + chip->shadow_ddr = in_be32(®s->simple_ddr); + chip->shadow_dvo = in_be32(®s->simple_dvo); + + return 0; +} + +static const struct of_device_id mpc52xx_simple_gpiochip_match[] = { + { .compatible = "fsl,mpc5200-gpio", }, + {} +}; + +static struct platform_driver mpc52xx_simple_gpiochip_driver = { + .driver = { + .name = "mpc5200-gpio", + .of_match_table = mpc52xx_simple_gpiochip_match, + }, + .probe = mpc52xx_simple_gpiochip_probe, + .remove = mpc52xx_gpiochip_remove, +}; + +static struct platform_driver * const drivers[] = { + &mpc52xx_wkup_gpiochip_driver, + &mpc52xx_simple_gpiochip_driver, +}; + +static int __init mpc52xx_gpio_init(void) +{ + return platform_register_drivers(drivers, ARRAY_SIZE(drivers)); +} + +/* Make sure we get initialised before anyone else tries to use us */ +subsys_initcall(mpc52xx_gpio_init); + +static void __exit mpc52xx_gpio_exit(void) +{ + platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); +} +module_exit(mpc52xx_gpio_exit); + +MODULE_DESCRIPTION("Freescale MPC52xx gpio driver"); +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de"); +MODULE_LICENSE("GPL v2"); + diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c new file mode 100644 index 000000000..1899d1725 --- /dev/null +++ b/drivers/gpio/gpio-mpc8xxx.c @@ -0,0 +1,419 @@ +/* + * GPIOs on MPC512x/8349/8572/8610/QorIQ and compatible + * + * Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk> + * Copyright (C) 2016 Freescale Semiconductor Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/gpio/driver.h> +#include <linux/bitops.h> + +#define MPC8XXX_GPIO_PINS 32 + +#define GPIO_DIR 0x00 +#define GPIO_ODR 0x04 +#define GPIO_DAT 0x08 +#define GPIO_IER 0x0c +#define GPIO_IMR 0x10 +#define GPIO_ICR 0x14 +#define GPIO_ICR2 0x18 + +struct mpc8xxx_gpio_chip { + struct gpio_chip gc; + void __iomem *regs; + raw_spinlock_t lock; + + int (*direction_output)(struct gpio_chip *chip, + unsigned offset, int value); + + struct irq_domain *irq; + unsigned int irqn; +}; + +/* + * This hardware has a big endian bit assignment such that GPIO line 0 is + * connected to bit 31, line 1 to bit 30 ... line 31 to bit 0. + * This inline helper give the right bitmask for a certain line. + */ +static inline u32 mpc_pin2mask(unsigned int offset) +{ + return BIT(31 - offset); +} + +/* Workaround GPIO 1 errata on MPC8572/MPC8536. The status of GPIOs + * defined as output cannot be determined by reading GPDAT register, + * so we use shadow data register instead. The status of input pins + * is determined by reading GPDAT register. + */ +static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + u32 val; + struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc); + u32 out_mask, out_shadow; + + out_mask = gc->read_reg(mpc8xxx_gc->regs + GPIO_DIR); + val = gc->read_reg(mpc8xxx_gc->regs + GPIO_DAT) & ~out_mask; + out_shadow = gc->bgpio_data & out_mask; + + return !!((val | out_shadow) & mpc_pin2mask(gpio)); +} + +static int mpc5121_gpio_dir_out(struct gpio_chip *gc, + unsigned int gpio, int val) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc); + /* GPIO 28..31 are input only on MPC5121 */ + if (gpio >= 28) + return -EINVAL; + + return mpc8xxx_gc->direction_output(gc, gpio, val); +} + +static int mpc5125_gpio_dir_out(struct gpio_chip *gc, + unsigned int gpio, int val) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc); + /* GPIO 0..3 are input only on MPC5125 */ + if (gpio <= 3) + return -EINVAL; + + return mpc8xxx_gc->direction_output(gc, gpio, val); +} + +static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc); + + if (mpc8xxx_gc->irq && offset < MPC8XXX_GPIO_PINS) + return irq_create_mapping(mpc8xxx_gc->irq, offset); + else + return -ENXIO; +} + +static void mpc8xxx_gpio_irq_cascade(struct irq_desc *desc) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + struct gpio_chip *gc = &mpc8xxx_gc->gc; + unsigned int mask; + + mask = gc->read_reg(mpc8xxx_gc->regs + GPIO_IER) + & gc->read_reg(mpc8xxx_gc->regs + GPIO_IMR); + if (mask) + generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq, + 32 - ffs(mask))); + if (chip->irq_eoi) + chip->irq_eoi(&desc->irq_data); +} + +static void mpc8xxx_irq_unmask(struct irq_data *d) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d); + struct gpio_chip *gc = &mpc8xxx_gc->gc; + unsigned long flags; + + raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + + gc->write_reg(mpc8xxx_gc->regs + GPIO_IMR, + gc->read_reg(mpc8xxx_gc->regs + GPIO_IMR) + | mpc_pin2mask(irqd_to_hwirq(d))); + + raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); +} + +static void mpc8xxx_irq_mask(struct irq_data *d) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d); + struct gpio_chip *gc = &mpc8xxx_gc->gc; + unsigned long flags; + + raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + + gc->write_reg(mpc8xxx_gc->regs + GPIO_IMR, + gc->read_reg(mpc8xxx_gc->regs + GPIO_IMR) + & ~mpc_pin2mask(irqd_to_hwirq(d))); + + raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); +} + +static void mpc8xxx_irq_ack(struct irq_data *d) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d); + struct gpio_chip *gc = &mpc8xxx_gc->gc; + + gc->write_reg(mpc8xxx_gc->regs + GPIO_IER, + mpc_pin2mask(irqd_to_hwirq(d))); +} + +static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d); + struct gpio_chip *gc = &mpc8xxx_gc->gc; + unsigned long flags; + + switch (flow_type) { + case IRQ_TYPE_EDGE_FALLING: + raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + gc->write_reg(mpc8xxx_gc->regs + GPIO_ICR, + gc->read_reg(mpc8xxx_gc->regs + GPIO_ICR) + | mpc_pin2mask(irqd_to_hwirq(d))); + raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + break; + + case IRQ_TYPE_EDGE_BOTH: + raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + gc->write_reg(mpc8xxx_gc->regs + GPIO_ICR, + gc->read_reg(mpc8xxx_gc->regs + GPIO_ICR) + & ~mpc_pin2mask(irqd_to_hwirq(d))); + raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int mpc512x_irq_set_type(struct irq_data *d, unsigned int flow_type) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d); + struct gpio_chip *gc = &mpc8xxx_gc->gc; + unsigned long gpio = irqd_to_hwirq(d); + void __iomem *reg; + unsigned int shift; + unsigned long flags; + + if (gpio < 16) { + reg = mpc8xxx_gc->regs + GPIO_ICR; + shift = (15 - gpio) * 2; + } else { + reg = mpc8xxx_gc->regs + GPIO_ICR2; + shift = (15 - (gpio % 16)) * 2; + } + + switch (flow_type) { + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_LEVEL_LOW: + raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + gc->write_reg(reg, (gc->read_reg(reg) & ~(3 << shift)) + | (2 << shift)); + raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + break; + + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_LEVEL_HIGH: + raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + gc->write_reg(reg, (gc->read_reg(reg) & ~(3 << shift)) + | (1 << shift)); + raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + break; + + case IRQ_TYPE_EDGE_BOTH: + raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + gc->write_reg(reg, (gc->read_reg(reg) & ~(3 << shift))); + raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static struct irq_chip mpc8xxx_irq_chip = { + .name = "mpc8xxx-gpio", + .irq_unmask = mpc8xxx_irq_unmask, + .irq_mask = mpc8xxx_irq_mask, + .irq_ack = mpc8xxx_irq_ack, + /* this might get overwritten in mpc8xxx_probe() */ + .irq_set_type = mpc8xxx_irq_set_type, +}; + +static int mpc8xxx_gpio_irq_map(struct irq_domain *h, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(irq, h->host_data); + irq_set_chip_and_handler(irq, &mpc8xxx_irq_chip, handle_edge_irq); + + return 0; +} + +static const struct irq_domain_ops mpc8xxx_gpio_irq_ops = { + .map = mpc8xxx_gpio_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + +struct mpc8xxx_gpio_devtype { + int (*gpio_dir_out)(struct gpio_chip *, unsigned int, int); + int (*gpio_get)(struct gpio_chip *, unsigned int); + int (*irq_set_type)(struct irq_data *, unsigned int); +}; + +static const struct mpc8xxx_gpio_devtype mpc512x_gpio_devtype = { + .gpio_dir_out = mpc5121_gpio_dir_out, + .irq_set_type = mpc512x_irq_set_type, +}; + +static const struct mpc8xxx_gpio_devtype mpc5125_gpio_devtype = { + .gpio_dir_out = mpc5125_gpio_dir_out, + .irq_set_type = mpc512x_irq_set_type, +}; + +static const struct mpc8xxx_gpio_devtype mpc8572_gpio_devtype = { + .gpio_get = mpc8572_gpio_get, +}; + +static const struct mpc8xxx_gpio_devtype mpc8xxx_gpio_devtype_default = { + .irq_set_type = mpc8xxx_irq_set_type, +}; + +static const struct of_device_id mpc8xxx_gpio_ids[] = { + { .compatible = "fsl,mpc8349-gpio", }, + { .compatible = "fsl,mpc8572-gpio", .data = &mpc8572_gpio_devtype, }, + { .compatible = "fsl,mpc8610-gpio", }, + { .compatible = "fsl,mpc5121-gpio", .data = &mpc512x_gpio_devtype, }, + { .compatible = "fsl,mpc5125-gpio", .data = &mpc5125_gpio_devtype, }, + { .compatible = "fsl,pq3-gpio", }, + { .compatible = "fsl,qoriq-gpio", }, + {} +}; + +static int mpc8xxx_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct mpc8xxx_gpio_chip *mpc8xxx_gc; + struct gpio_chip *gc; + const struct mpc8xxx_gpio_devtype *devtype = + of_device_get_match_data(&pdev->dev); + int ret; + + mpc8xxx_gc = devm_kzalloc(&pdev->dev, sizeof(*mpc8xxx_gc), GFP_KERNEL); + if (!mpc8xxx_gc) + return -ENOMEM; + + platform_set_drvdata(pdev, mpc8xxx_gc); + + raw_spin_lock_init(&mpc8xxx_gc->lock); + + mpc8xxx_gc->regs = of_iomap(np, 0); + if (!mpc8xxx_gc->regs) + return -ENOMEM; + + gc = &mpc8xxx_gc->gc; + gc->parent = &pdev->dev; + + if (of_property_read_bool(np, "little-endian")) { + ret = bgpio_init(gc, &pdev->dev, 4, + mpc8xxx_gc->regs + GPIO_DAT, + NULL, NULL, + mpc8xxx_gc->regs + GPIO_DIR, NULL, + BGPIOF_BIG_ENDIAN); + if (ret) + goto err; + dev_dbg(&pdev->dev, "GPIO registers are LITTLE endian\n"); + } else { + ret = bgpio_init(gc, &pdev->dev, 4, + mpc8xxx_gc->regs + GPIO_DAT, + NULL, NULL, + mpc8xxx_gc->regs + GPIO_DIR, NULL, + BGPIOF_BIG_ENDIAN + | BGPIOF_BIG_ENDIAN_BYTE_ORDER); + if (ret) + goto err; + dev_dbg(&pdev->dev, "GPIO registers are BIG endian\n"); + } + + mpc8xxx_gc->direction_output = gc->direction_output; + + if (!devtype) + devtype = &mpc8xxx_gpio_devtype_default; + + /* + * It's assumed that only a single type of gpio controller is available + * on the current machine, so overwriting global data is fine. + */ + if (devtype->irq_set_type) + mpc8xxx_irq_chip.irq_set_type = devtype->irq_set_type; + + if (devtype->gpio_dir_out) + gc->direction_output = devtype->gpio_dir_out; + if (devtype->gpio_get) + gc->get = devtype->gpio_get; + + gc->to_irq = mpc8xxx_gpio_to_irq; + + ret = gpiochip_add_data(gc, mpc8xxx_gc); + if (ret) { + pr_err("%pOF: GPIO chip registration failed with status %d\n", + np, ret); + goto err; + } + + mpc8xxx_gc->irqn = irq_of_parse_and_map(np, 0); + if (!mpc8xxx_gc->irqn) + return 0; + + mpc8xxx_gc->irq = irq_domain_add_linear(np, MPC8XXX_GPIO_PINS, + &mpc8xxx_gpio_irq_ops, mpc8xxx_gc); + if (!mpc8xxx_gc->irq) + return 0; + + /* ack and mask all irqs */ + gc->write_reg(mpc8xxx_gc->regs + GPIO_IER, 0xffffffff); + gc->write_reg(mpc8xxx_gc->regs + GPIO_IMR, 0); + + irq_set_chained_handler_and_data(mpc8xxx_gc->irqn, + mpc8xxx_gpio_irq_cascade, mpc8xxx_gc); + return 0; +err: + iounmap(mpc8xxx_gc->regs); + return ret; +} + +static int mpc8xxx_remove(struct platform_device *pdev) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = platform_get_drvdata(pdev); + + if (mpc8xxx_gc->irq) { + irq_set_chained_handler_and_data(mpc8xxx_gc->irqn, NULL, NULL); + irq_domain_remove(mpc8xxx_gc->irq); + } + + gpiochip_remove(&mpc8xxx_gc->gc); + iounmap(mpc8xxx_gc->regs); + + return 0; +} + +static struct platform_driver mpc8xxx_plat_driver = { + .probe = mpc8xxx_probe, + .remove = mpc8xxx_remove, + .driver = { + .name = "gpio-mpc8xxx", + .of_match_table = mpc8xxx_gpio_ids, + }, +}; + +static int __init mpc8xxx_init(void) +{ + return platform_driver_register(&mpc8xxx_plat_driver); +} + +arch_initcall(mpc8xxx_init); diff --git a/drivers/gpio/gpio-msic.c b/drivers/gpio/gpio-msic.c new file mode 100644 index 000000000..3b34dbece --- /dev/null +++ b/drivers/gpio/gpio-msic.c @@ -0,0 +1,330 @@ +/* + * Intel Medfield MSIC GPIO driver> + * Copyright (c) 2011, Intel Corporation. + * + * Author: Mathias Nyman <mathias.nyman@linux.intel.com> + * Based on intel_pmic_gpio.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/gpio/driver.h> +#include <linux/platform_device.h> +#include <linux/mfd/intel_msic.h> + +/* the offset for the mapping of global gpio pin to irq */ +#define MSIC_GPIO_IRQ_OFFSET 0x100 + +#define MSIC_GPIO_DIR_IN 0 +#define MSIC_GPIO_DIR_OUT BIT(5) +#define MSIC_GPIO_TRIG_FALL BIT(1) +#define MSIC_GPIO_TRIG_RISE BIT(2) + +/* masks for msic gpio output GPIOxxxxCTLO registers */ +#define MSIC_GPIO_DIR_MASK BIT(5) +#define MSIC_GPIO_DRV_MASK BIT(4) +#define MSIC_GPIO_REN_MASK BIT(3) +#define MSIC_GPIO_RVAL_MASK (BIT(2) | BIT(1)) +#define MSIC_GPIO_DOUT_MASK BIT(0) + +/* masks for msic gpio input GPIOxxxxCTLI registers */ +#define MSIC_GPIO_GLBYP_MASK BIT(5) +#define MSIC_GPIO_DBNC_MASK (BIT(4) | BIT(3)) +#define MSIC_GPIO_INTCNT_MASK (BIT(2) | BIT(1)) +#define MSIC_GPIO_DIN_MASK BIT(0) + +#define MSIC_NUM_GPIO 24 + +struct msic_gpio { + struct platform_device *pdev; + struct mutex buslock; + struct gpio_chip chip; + int irq; + unsigned irq_base; + unsigned long trig_change_mask; + unsigned trig_type; +}; + +/* + * MSIC has 24 gpios, 16 low voltage (1.2-1.8v) and 8 high voltage (3v). + * Both the high and low voltage gpios are divided in two banks. + * GPIOs are numbered with GPIO0LV0 as gpio_base in the following order: + * GPIO0LV0..GPIO0LV7: low voltage, bank 0, gpio_base + * GPIO1LV0..GPIO1LV7: low voltage, bank 1, gpio_base + 8 + * GPIO0HV0..GPIO0HV3: high voltage, bank 0, gpio_base + 16 + * GPIO1HV0..GPIO1HV3: high voltage, bank 1, gpio_base + 20 + */ + +static int msic_gpio_to_ireg(unsigned offset) +{ + if (offset >= MSIC_NUM_GPIO) + return -EINVAL; + + if (offset < 8) + return INTEL_MSIC_GPIO0LV0CTLI - offset; + if (offset < 16) + return INTEL_MSIC_GPIO1LV0CTLI - offset + 8; + if (offset < 20) + return INTEL_MSIC_GPIO0HV0CTLI - offset + 16; + + return INTEL_MSIC_GPIO1HV0CTLI - offset + 20; +} + +static int msic_gpio_to_oreg(unsigned offset) +{ + if (offset >= MSIC_NUM_GPIO) + return -EINVAL; + + if (offset < 8) + return INTEL_MSIC_GPIO0LV0CTLO - offset; + if (offset < 16) + return INTEL_MSIC_GPIO1LV0CTLO - offset + 8; + if (offset < 20) + return INTEL_MSIC_GPIO0HV0CTLO - offset + 16; + + return INTEL_MSIC_GPIO1HV0CTLO - offset + 20; +} + +static int msic_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + int reg; + + reg = msic_gpio_to_oreg(offset); + if (reg < 0) + return reg; + + return intel_msic_reg_update(reg, MSIC_GPIO_DIR_IN, MSIC_GPIO_DIR_MASK); +} + +static int msic_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + int reg; + unsigned mask; + + value = (!!value) | MSIC_GPIO_DIR_OUT; + mask = MSIC_GPIO_DIR_MASK | MSIC_GPIO_DOUT_MASK; + + reg = msic_gpio_to_oreg(offset); + if (reg < 0) + return reg; + + return intel_msic_reg_update(reg, value, mask); +} + +static int msic_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + u8 r; + int ret; + int reg; + + reg = msic_gpio_to_ireg(offset); + if (reg < 0) + return reg; + + ret = intel_msic_reg_read(reg, &r); + if (ret < 0) + return ret; + + return !!(r & MSIC_GPIO_DIN_MASK); +} + +static void msic_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + int reg; + + reg = msic_gpio_to_oreg(offset); + if (reg < 0) + return; + + intel_msic_reg_update(reg, !!value , MSIC_GPIO_DOUT_MASK); +} + +/* + * This is called from genirq with mg->buslock locked and + * irq_desc->lock held. We can not access the scu bus here, so we + * store the change and update in the bus_sync_unlock() function below + */ +static int msic_irq_type(struct irq_data *data, unsigned type) +{ + struct msic_gpio *mg = irq_data_get_irq_chip_data(data); + u32 gpio = data->irq - mg->irq_base; + + if (gpio >= mg->chip.ngpio) + return -EINVAL; + + /* mark for which gpio the trigger changed, protected by buslock */ + mg->trig_change_mask |= (1 << gpio); + mg->trig_type = type; + + return 0; +} + +static int msic_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct msic_gpio *mg = gpiochip_get_data(chip); + return mg->irq_base + offset; +} + +static void msic_bus_lock(struct irq_data *data) +{ + struct msic_gpio *mg = irq_data_get_irq_chip_data(data); + mutex_lock(&mg->buslock); +} + +static void msic_bus_sync_unlock(struct irq_data *data) +{ + struct msic_gpio *mg = irq_data_get_irq_chip_data(data); + int offset; + int reg; + u8 trig = 0; + + /* We can only get one change at a time as the buslock covers the + entire transaction. The irq_desc->lock is dropped before we are + called but that is fine */ + if (mg->trig_change_mask) { + offset = __ffs(mg->trig_change_mask); + + reg = msic_gpio_to_ireg(offset); + if (reg < 0) + goto out; + + if (mg->trig_type & IRQ_TYPE_EDGE_RISING) + trig |= MSIC_GPIO_TRIG_RISE; + if (mg->trig_type & IRQ_TYPE_EDGE_FALLING) + trig |= MSIC_GPIO_TRIG_FALL; + + intel_msic_reg_update(reg, trig, MSIC_GPIO_INTCNT_MASK); + mg->trig_change_mask = 0; + } +out: + mutex_unlock(&mg->buslock); +} + +/* Firmware does all the masking and unmasking for us, no masking here. */ +static void msic_irq_unmask(struct irq_data *data) { } + +static void msic_irq_mask(struct irq_data *data) { } + +static struct irq_chip msic_irqchip = { + .name = "MSIC-GPIO", + .irq_mask = msic_irq_mask, + .irq_unmask = msic_irq_unmask, + .irq_set_type = msic_irq_type, + .irq_bus_lock = msic_bus_lock, + .irq_bus_sync_unlock = msic_bus_sync_unlock, +}; + +static void msic_gpio_irq_handler(struct irq_desc *desc) +{ + struct irq_data *data = irq_desc_get_irq_data(desc); + struct msic_gpio *mg = irq_data_get_irq_handler_data(data); + struct irq_chip *chip = irq_data_get_irq_chip(data); + struct intel_msic *msic = pdev_to_intel_msic(mg->pdev); + int i; + int bitnr; + u8 pin; + unsigned long pending = 0; + + for (i = 0; i < (mg->chip.ngpio / BITS_PER_BYTE); i++) { + intel_msic_irq_read(msic, INTEL_MSIC_GPIO0LVIRQ + i, &pin); + pending = pin; + + if (pending) { + for_each_set_bit(bitnr, &pending, BITS_PER_BYTE) + generic_handle_irq(mg->irq_base + + (i * BITS_PER_BYTE) + bitnr); + } + } + chip->irq_eoi(data); +} + +static int platform_msic_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct intel_msic_gpio_pdata *pdata = dev_get_platdata(dev); + struct msic_gpio *mg; + int irq = platform_get_irq(pdev, 0); + int retval; + int i; + + if (irq < 0) { + dev_err(dev, "no IRQ line: %d\n", irq); + return irq; + } + + if (!pdata || !pdata->gpio_base) { + dev_err(dev, "incorrect or missing platform data\n"); + return -EINVAL; + } + + mg = kzalloc(sizeof(*mg), GFP_KERNEL); + if (!mg) + return -ENOMEM; + + dev_set_drvdata(dev, mg); + + mg->pdev = pdev; + mg->irq = irq; + mg->irq_base = pdata->gpio_base + MSIC_GPIO_IRQ_OFFSET; + mg->chip.label = "msic_gpio"; + mg->chip.direction_input = msic_gpio_direction_input; + mg->chip.direction_output = msic_gpio_direction_output; + mg->chip.get = msic_gpio_get; + mg->chip.set = msic_gpio_set; + mg->chip.to_irq = msic_gpio_to_irq; + mg->chip.base = pdata->gpio_base; + mg->chip.ngpio = MSIC_NUM_GPIO; + mg->chip.can_sleep = true; + mg->chip.parent = dev; + + mutex_init(&mg->buslock); + + retval = gpiochip_add_data(&mg->chip, mg); + if (retval) { + dev_err(dev, "Adding MSIC gpio chip failed\n"); + goto err; + } + + for (i = 0; i < mg->chip.ngpio; i++) { + irq_set_chip_data(i + mg->irq_base, mg); + irq_set_chip_and_handler(i + mg->irq_base, + &msic_irqchip, + handle_simple_irq); + } + irq_set_chained_handler_and_data(mg->irq, msic_gpio_irq_handler, mg); + + return 0; +err: + kfree(mg); + return retval; +} + +static struct platform_driver platform_msic_gpio_driver = { + .driver = { + .name = "msic_gpio", + }, + .probe = platform_msic_gpio_probe, +}; + +static int __init platform_msic_gpio_init(void) +{ + return platform_driver_register(&platform_msic_gpio_driver); +} +subsys_initcall(platform_msic_gpio_init); diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c new file mode 100644 index 000000000..74401e0ad --- /dev/null +++ b/drivers/gpio/gpio-mt7621.c @@ -0,0 +1,338 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> + +#define MTK_BANK_CNT 3 +#define MTK_BANK_WIDTH 32 + +#define GPIO_BANK_STRIDE 0x04 +#define GPIO_REG_CTRL 0x00 +#define GPIO_REG_POL 0x10 +#define GPIO_REG_DATA 0x20 +#define GPIO_REG_DSET 0x30 +#define GPIO_REG_DCLR 0x40 +#define GPIO_REG_REDGE 0x50 +#define GPIO_REG_FEDGE 0x60 +#define GPIO_REG_HLVL 0x70 +#define GPIO_REG_LLVL 0x80 +#define GPIO_REG_STAT 0x90 +#define GPIO_REG_EDGE 0xA0 + +struct mtk_gc { + struct irq_chip irq_chip; + struct gpio_chip chip; + spinlock_t lock; + int bank; + u32 rising; + u32 falling; + u32 hlevel; + u32 llevel; +}; + +/** + * struct mtk - state container for + * data of the platform driver. It is 3 + * separate gpio-chip each one with its + * own irq_chip. + * @dev: device instance + * @base: memory base address + * @gpio_irq: irq number from the device tree + * @gc_map: array of the gpio chips + */ +struct mtk { + struct device *dev; + void __iomem *base; + int gpio_irq; + struct mtk_gc gc_map[MTK_BANK_CNT]; +}; + +static inline struct mtk_gc * +to_mediatek_gpio(struct gpio_chip *chip) +{ + return container_of(chip, struct mtk_gc, chip); +} + +static inline void +mtk_gpio_w32(struct mtk_gc *rg, u32 offset, u32 val) +{ + struct gpio_chip *gc = &rg->chip; + struct mtk *mtk = gpiochip_get_data(gc); + + offset = (rg->bank * GPIO_BANK_STRIDE) + offset; + gc->write_reg(mtk->base + offset, val); +} + +static inline u32 +mtk_gpio_r32(struct mtk_gc *rg, u32 offset) +{ + struct gpio_chip *gc = &rg->chip; + struct mtk *mtk = gpiochip_get_data(gc); + + offset = (rg->bank * GPIO_BANK_STRIDE) + offset; + return gc->read_reg(mtk->base + offset); +} + +static irqreturn_t +mediatek_gpio_irq_handler(int irq, void *data) +{ + struct gpio_chip *gc = data; + struct mtk_gc *rg = to_mediatek_gpio(gc); + irqreturn_t ret = IRQ_NONE; + unsigned long pending; + int bit; + + pending = mtk_gpio_r32(rg, GPIO_REG_STAT); + + for_each_set_bit(bit, &pending, MTK_BANK_WIDTH) { + u32 map = irq_find_mapping(gc->irq.domain, bit); + + generic_handle_irq(map); + mtk_gpio_w32(rg, GPIO_REG_STAT, BIT(bit)); + ret |= IRQ_HANDLED; + } + + return ret; +} + +static void +mediatek_gpio_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct mtk_gc *rg = to_mediatek_gpio(gc); + int pin = d->hwirq; + unsigned long flags; + u32 rise, fall, high, low; + + spin_lock_irqsave(&rg->lock, flags); + rise = mtk_gpio_r32(rg, GPIO_REG_REDGE); + fall = mtk_gpio_r32(rg, GPIO_REG_FEDGE); + high = mtk_gpio_r32(rg, GPIO_REG_HLVL); + low = mtk_gpio_r32(rg, GPIO_REG_LLVL); + mtk_gpio_w32(rg, GPIO_REG_REDGE, rise | (BIT(pin) & rg->rising)); + mtk_gpio_w32(rg, GPIO_REG_FEDGE, fall | (BIT(pin) & rg->falling)); + mtk_gpio_w32(rg, GPIO_REG_HLVL, high | (BIT(pin) & rg->hlevel)); + mtk_gpio_w32(rg, GPIO_REG_LLVL, low | (BIT(pin) & rg->llevel)); + spin_unlock_irqrestore(&rg->lock, flags); +} + +static void +mediatek_gpio_irq_mask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct mtk_gc *rg = to_mediatek_gpio(gc); + int pin = d->hwirq; + unsigned long flags; + u32 rise, fall, high, low; + + spin_lock_irqsave(&rg->lock, flags); + rise = mtk_gpio_r32(rg, GPIO_REG_REDGE); + fall = mtk_gpio_r32(rg, GPIO_REG_FEDGE); + high = mtk_gpio_r32(rg, GPIO_REG_HLVL); + low = mtk_gpio_r32(rg, GPIO_REG_LLVL); + mtk_gpio_w32(rg, GPIO_REG_FEDGE, fall & ~BIT(pin)); + mtk_gpio_w32(rg, GPIO_REG_REDGE, rise & ~BIT(pin)); + mtk_gpio_w32(rg, GPIO_REG_HLVL, high & ~BIT(pin)); + mtk_gpio_w32(rg, GPIO_REG_LLVL, low & ~BIT(pin)); + spin_unlock_irqrestore(&rg->lock, flags); +} + +static int +mediatek_gpio_irq_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct mtk_gc *rg = to_mediatek_gpio(gc); + int pin = d->hwirq; + u32 mask = BIT(pin); + + if (type == IRQ_TYPE_PROBE) { + if ((rg->rising | rg->falling | + rg->hlevel | rg->llevel) & mask) + return 0; + + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + } + + rg->rising &= ~mask; + rg->falling &= ~mask; + rg->hlevel &= ~mask; + rg->llevel &= ~mask; + + switch (type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_EDGE_BOTH: + rg->rising |= mask; + rg->falling |= mask; + break; + case IRQ_TYPE_EDGE_RISING: + rg->rising |= mask; + break; + case IRQ_TYPE_EDGE_FALLING: + rg->falling |= mask; + break; + case IRQ_TYPE_LEVEL_HIGH: + rg->hlevel |= mask; + break; + case IRQ_TYPE_LEVEL_LOW: + rg->llevel |= mask; + break; + } + + return 0; +} + +static int +mediatek_gpio_xlate(struct gpio_chip *chip, + const struct of_phandle_args *spec, u32 *flags) +{ + int gpio = spec->args[0]; + struct mtk_gc *rg = to_mediatek_gpio(chip); + + if (rg->bank != gpio / MTK_BANK_WIDTH) + return -EINVAL; + + if (flags) + *flags = spec->args[1]; + + return gpio % MTK_BANK_WIDTH; +} + +static int +mediatek_gpio_bank_probe(struct device *dev, + struct device_node *node, int bank) +{ + struct mtk *mtk = dev_get_drvdata(dev); + struct mtk_gc *rg; + void __iomem *dat, *set, *ctrl, *diro; + int ret; + + rg = &mtk->gc_map[bank]; + memset(rg, 0, sizeof(*rg)); + + spin_lock_init(&rg->lock); + rg->chip.of_node = node; + rg->bank = bank; + + dat = mtk->base + GPIO_REG_DATA + (rg->bank * GPIO_BANK_STRIDE); + set = mtk->base + GPIO_REG_DSET + (rg->bank * GPIO_BANK_STRIDE); + ctrl = mtk->base + GPIO_REG_DCLR + (rg->bank * GPIO_BANK_STRIDE); + diro = mtk->base + GPIO_REG_CTRL + (rg->bank * GPIO_BANK_STRIDE); + + ret = bgpio_init(&rg->chip, dev, 4, + dat, set, ctrl, diro, NULL, 0); + if (ret) { + dev_err(dev, "bgpio_init() failed\n"); + return ret; + } + + rg->chip.of_gpio_n_cells = 2; + rg->chip.of_xlate = mediatek_gpio_xlate; + rg->chip.label = devm_kasprintf(dev, GFP_KERNEL, "%s-bank%d", + dev_name(dev), bank); + if (!rg->chip.label) + return -ENOMEM; + + ret = devm_gpiochip_add_data(dev, &rg->chip, mtk); + if (ret < 0) { + dev_err(dev, "Could not register gpio %d, ret=%d\n", + rg->chip.ngpio, ret); + return ret; + } + + rg->irq_chip.name = dev_name(dev); + rg->irq_chip.parent_device = dev; + rg->irq_chip.irq_unmask = mediatek_gpio_irq_unmask; + rg->irq_chip.irq_mask = mediatek_gpio_irq_mask; + rg->irq_chip.irq_mask_ack = mediatek_gpio_irq_mask; + rg->irq_chip.irq_set_type = mediatek_gpio_irq_type; + + if (mtk->gpio_irq) { + /* + * Manually request the irq here instead of passing + * a flow-handler to gpiochip_set_chained_irqchip, + * because the irq is shared. + */ + ret = devm_request_irq(dev, mtk->gpio_irq, + mediatek_gpio_irq_handler, IRQF_SHARED, + rg->chip.label, &rg->chip); + + if (ret) { + dev_err(dev, "Error requesting IRQ %d: %d\n", + mtk->gpio_irq, ret); + return ret; + } + + ret = gpiochip_irqchip_add(&rg->chip, &rg->irq_chip, + 0, handle_simple_irq, IRQ_TYPE_NONE); + if (ret) { + dev_err(dev, "failed to add gpiochip_irqchip\n"); + return ret; + } + + gpiochip_set_chained_irqchip(&rg->chip, &rg->irq_chip, + mtk->gpio_irq, NULL); + } + + /* set polarity to low for all gpios */ + mtk_gpio_w32(rg, GPIO_REG_POL, 0); + + dev_info(dev, "registering %d gpios\n", rg->chip.ngpio); + + return 0; +} + +static int +mediatek_gpio_probe(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct mtk *mtk; + int i; + int ret; + + mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); + if (!mtk) + return -ENOMEM; + + mtk->base = devm_ioremap_resource(dev, res); + if (IS_ERR(mtk->base)) + return PTR_ERR(mtk->base); + + mtk->gpio_irq = irq_of_parse_and_map(np, 0); + mtk->dev = dev; + platform_set_drvdata(pdev, mtk); + + for (i = 0; i < MTK_BANK_CNT; i++) { + ret = mediatek_gpio_bank_probe(dev, np, i); + if (ret) + return ret; + } + + return 0; +} + +static const struct of_device_id mediatek_gpio_match[] = { + { .compatible = "mediatek,mt7621-gpio" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mediatek_gpio_match); + +static struct platform_driver mediatek_gpio_driver = { + .probe = mediatek_gpio_probe, + .driver = { + .name = "mt7621_gpio", + .of_match_table = mediatek_gpio_match, + }, +}; + +builtin_platform_driver(mediatek_gpio_driver); diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c new file mode 100644 index 000000000..199b96967 --- /dev/null +++ b/drivers/gpio/gpio-mvebu.c @@ -0,0 +1,1276 @@ +/* + * GPIO driver for Marvell SoCs + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Andrew Lunn <andrew@lunn.ch> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This driver is a fairly straightforward GPIO driver for the + * complete family of Marvell EBU SoC platforms (Orion, Dove, + * Kirkwood, Discovery, Armada 370/XP). The only complexity of this + * driver is the different register layout that exists between the + * non-SMP platforms (Orion, Dove, Kirkwood, Armada 370) and the SMP + * platforms (MV78200 from the Discovery family and the Armada + * XP). Therefore, this driver handles three variants of the GPIO + * block: + * - the basic variant, called "orion-gpio", with the simplest + * register set. Used on Orion, Dove, Kirkwoord, Armada 370 and + * non-SMP Discovery systems + * - the mv78200 variant for MV78200 Discovery systems. This variant + * turns the edge mask and level mask registers into CPU0 edge + * mask/level mask registers, and adds CPU1 edge mask/level mask + * registers. + * - the armadaxp variant for Armada XP systems. This variant keeps + * the normal cause/edge mask/level mask registers when the global + * interrupts are used, but adds per-CPU cause/edge mask/level mask + * registers n a separate memory area for the per-CPU GPIO + * interrupts. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/consumer.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqdomain.h> +#include <linux/mfd/syscon.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +/* + * GPIO unit register offsets. + */ +#define GPIO_OUT_OFF 0x0000 +#define GPIO_IO_CONF_OFF 0x0004 +#define GPIO_BLINK_EN_OFF 0x0008 +#define GPIO_IN_POL_OFF 0x000c +#define GPIO_DATA_IN_OFF 0x0010 +#define GPIO_EDGE_CAUSE_OFF 0x0014 +#define GPIO_EDGE_MASK_OFF 0x0018 +#define GPIO_LEVEL_MASK_OFF 0x001c +#define GPIO_BLINK_CNT_SELECT_OFF 0x0020 + +/* + * PWM register offsets. + */ +#define PWM_BLINK_ON_DURATION_OFF 0x0 +#define PWM_BLINK_OFF_DURATION_OFF 0x4 + + +/* The MV78200 has per-CPU registers for edge mask and level mask */ +#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18) +#define GPIO_LEVEL_MASK_MV78200_OFF(cpu) ((cpu) ? 0x34 : 0x1C) + +/* + * The Armada XP has per-CPU registers for interrupt cause, interrupt + * mask and interrupt level mask. Those are relative to the + * percpu_membase. + */ +#define GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu) ((cpu) * 0x4) +#define GPIO_EDGE_MASK_ARMADAXP_OFF(cpu) (0x10 + (cpu) * 0x4) +#define GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu) (0x20 + (cpu) * 0x4) + +#define MVEBU_GPIO_SOC_VARIANT_ORION 0x1 +#define MVEBU_GPIO_SOC_VARIANT_MV78200 0x2 +#define MVEBU_GPIO_SOC_VARIANT_ARMADAXP 0x3 +#define MVEBU_GPIO_SOC_VARIANT_A8K 0x4 + +#define MVEBU_MAX_GPIO_PER_BANK 32 + +struct mvebu_pwm { + void __iomem *membase; + unsigned long clk_rate; + struct gpio_desc *gpiod; + struct pwm_chip chip; + spinlock_t lock; + struct mvebu_gpio_chip *mvchip; + + /* Used to preserve GPIO/PWM registers across suspend/resume */ + u32 blink_select; + u32 blink_on_duration; + u32 blink_off_duration; +}; + +struct mvebu_gpio_chip { + struct gpio_chip chip; + struct regmap *regs; + u32 offset; + struct regmap *percpu_regs; + int irqbase; + struct irq_domain *domain; + int soc_variant; + + /* Used for PWM support */ + struct clk *clk; + struct mvebu_pwm *mvpwm; + + /* Used to preserve GPIO registers across suspend/resume */ + u32 out_reg; + u32 io_conf_reg; + u32 blink_en_reg; + u32 in_pol_reg; + u32 edge_mask_regs[4]; + u32 level_mask_regs[4]; +}; + +/* + * Functions returning addresses of individual registers for a given + * GPIO controller. + */ + +static void mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip, + struct regmap **map, unsigned int *offset) +{ + int cpu; + + switch (mvchip->soc_variant) { + case MVEBU_GPIO_SOC_VARIANT_ORION: + case MVEBU_GPIO_SOC_VARIANT_MV78200: + case MVEBU_GPIO_SOC_VARIANT_A8K: + *map = mvchip->regs; + *offset = GPIO_EDGE_CAUSE_OFF + mvchip->offset; + break; + case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: + cpu = smp_processor_id(); + *map = mvchip->percpu_regs; + *offset = GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu); + break; + default: + BUG(); + } +} + +static u32 +mvebu_gpio_read_edge_cause(struct mvebu_gpio_chip *mvchip) +{ + struct regmap *map; + unsigned int offset; + u32 val; + + mvebu_gpioreg_edge_cause(mvchip, &map, &offset); + regmap_read(map, offset, &val); + + return val; +} + +static void +mvebu_gpio_write_edge_cause(struct mvebu_gpio_chip *mvchip, u32 val) +{ + struct regmap *map; + unsigned int offset; + + mvebu_gpioreg_edge_cause(mvchip, &map, &offset); + regmap_write(map, offset, val); +} + +static inline void +mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip, + struct regmap **map, unsigned int *offset) +{ + int cpu; + + switch (mvchip->soc_variant) { + case MVEBU_GPIO_SOC_VARIANT_ORION: + case MVEBU_GPIO_SOC_VARIANT_A8K: + *map = mvchip->regs; + *offset = GPIO_EDGE_MASK_OFF + mvchip->offset; + break; + case MVEBU_GPIO_SOC_VARIANT_MV78200: + cpu = smp_processor_id(); + *map = mvchip->regs; + *offset = GPIO_EDGE_MASK_MV78200_OFF(cpu); + break; + case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: + cpu = smp_processor_id(); + *map = mvchip->percpu_regs; + *offset = GPIO_EDGE_MASK_ARMADAXP_OFF(cpu); + break; + default: + BUG(); + } +} + +static u32 +mvebu_gpio_read_edge_mask(struct mvebu_gpio_chip *mvchip) +{ + struct regmap *map; + unsigned int offset; + u32 val; + + mvebu_gpioreg_edge_mask(mvchip, &map, &offset); + regmap_read(map, offset, &val); + + return val; +} + +static void +mvebu_gpio_write_edge_mask(struct mvebu_gpio_chip *mvchip, u32 val) +{ + struct regmap *map; + unsigned int offset; + + mvebu_gpioreg_edge_mask(mvchip, &map, &offset); + regmap_write(map, offset, val); +} + +static void +mvebu_gpioreg_level_mask(struct mvebu_gpio_chip *mvchip, + struct regmap **map, unsigned int *offset) +{ + int cpu; + + switch (mvchip->soc_variant) { + case MVEBU_GPIO_SOC_VARIANT_ORION: + case MVEBU_GPIO_SOC_VARIANT_A8K: + *map = mvchip->regs; + *offset = GPIO_LEVEL_MASK_OFF + mvchip->offset; + break; + case MVEBU_GPIO_SOC_VARIANT_MV78200: + cpu = smp_processor_id(); + *map = mvchip->regs; + *offset = GPIO_LEVEL_MASK_MV78200_OFF(cpu); + break; + case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: + cpu = smp_processor_id(); + *map = mvchip->percpu_regs; + *offset = GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu); + break; + default: + BUG(); + } +} + +static u32 +mvebu_gpio_read_level_mask(struct mvebu_gpio_chip *mvchip) +{ + struct regmap *map; + unsigned int offset; + u32 val; + + mvebu_gpioreg_level_mask(mvchip, &map, &offset); + regmap_read(map, offset, &val); + + return val; +} + +static void +mvebu_gpio_write_level_mask(struct mvebu_gpio_chip *mvchip, u32 val) +{ + struct regmap *map; + unsigned int offset; + + mvebu_gpioreg_level_mask(mvchip, &map, &offset); + regmap_write(map, offset, val); +} + +/* + * Functions returning addresses of individual registers for a given + * PWM controller. + */ +static void __iomem *mvebu_pwmreg_blink_on_duration(struct mvebu_pwm *mvpwm) +{ + return mvpwm->membase + PWM_BLINK_ON_DURATION_OFF; +} + +static void __iomem *mvebu_pwmreg_blink_off_duration(struct mvebu_pwm *mvpwm) +{ + return mvpwm->membase + PWM_BLINK_OFF_DURATION_OFF; +} + +/* + * Functions implementing the gpio_chip methods + */ +static void mvebu_gpio_set(struct gpio_chip *chip, unsigned int pin, int value) +{ + struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip); + + regmap_update_bits(mvchip->regs, GPIO_OUT_OFF + mvchip->offset, + BIT(pin), value ? BIT(pin) : 0); +} + +static int mvebu_gpio_get(struct gpio_chip *chip, unsigned int pin) +{ + struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip); + u32 u; + + regmap_read(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset, &u); + + if (u & BIT(pin)) { + u32 data_in, in_pol; + + regmap_read(mvchip->regs, GPIO_DATA_IN_OFF + mvchip->offset, + &data_in); + regmap_read(mvchip->regs, GPIO_IN_POL_OFF + mvchip->offset, + &in_pol); + u = data_in ^ in_pol; + } else { + regmap_read(mvchip->regs, GPIO_OUT_OFF + mvchip->offset, &u); + } + + return (u >> pin) & 1; +} + +static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned int pin, + int value) +{ + struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip); + + regmap_update_bits(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset, + BIT(pin), value ? BIT(pin) : 0); +} + +static int mvebu_gpio_direction_input(struct gpio_chip *chip, unsigned int pin) +{ + struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip); + int ret; + + /* + * Check with the pinctrl driver whether this pin is usable as + * an input GPIO + */ + ret = pinctrl_gpio_direction_input(chip->base + pin); + if (ret) + return ret; + + regmap_update_bits(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset, + BIT(pin), BIT(pin)); + + return 0; +} + +static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned int pin, + int value) +{ + struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip); + int ret; + + /* + * Check with the pinctrl driver whether this pin is usable as + * an output GPIO + */ + ret = pinctrl_gpio_direction_output(chip->base + pin); + if (ret) + return ret; + + mvebu_gpio_blink(chip, pin, 0); + mvebu_gpio_set(chip, pin, value); + + regmap_update_bits(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset, + BIT(pin), 0); + + return 0; +} + +static int mvebu_gpio_to_irq(struct gpio_chip *chip, unsigned int pin) +{ + struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip); + + return irq_create_mapping(mvchip->domain, pin); +} + +/* + * Functions implementing the irq_chip methods + */ +static void mvebu_gpio_irq_ack(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mvebu_gpio_chip *mvchip = gc->private; + u32 mask = d->mask; + + irq_gc_lock(gc); + mvebu_gpio_write_edge_cause(mvchip, ~mask); + irq_gc_unlock(gc); +} + +static void mvebu_gpio_edge_irq_mask(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mvebu_gpio_chip *mvchip = gc->private; + struct irq_chip_type *ct = irq_data_get_chip_type(d); + u32 mask = d->mask; + + irq_gc_lock(gc); + ct->mask_cache_priv &= ~mask; + mvebu_gpio_write_edge_mask(mvchip, ct->mask_cache_priv); + irq_gc_unlock(gc); +} + +static void mvebu_gpio_edge_irq_unmask(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mvebu_gpio_chip *mvchip = gc->private; + struct irq_chip_type *ct = irq_data_get_chip_type(d); + u32 mask = d->mask; + + irq_gc_lock(gc); + ct->mask_cache_priv |= mask; + mvebu_gpio_write_edge_mask(mvchip, ct->mask_cache_priv); + irq_gc_unlock(gc); +} + +static void mvebu_gpio_level_irq_mask(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mvebu_gpio_chip *mvchip = gc->private; + struct irq_chip_type *ct = irq_data_get_chip_type(d); + u32 mask = d->mask; + + irq_gc_lock(gc); + ct->mask_cache_priv &= ~mask; + mvebu_gpio_write_level_mask(mvchip, ct->mask_cache_priv); + irq_gc_unlock(gc); +} + +static void mvebu_gpio_level_irq_unmask(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mvebu_gpio_chip *mvchip = gc->private; + struct irq_chip_type *ct = irq_data_get_chip_type(d); + u32 mask = d->mask; + + irq_gc_lock(gc); + ct->mask_cache_priv |= mask; + mvebu_gpio_write_level_mask(mvchip, ct->mask_cache_priv); + irq_gc_unlock(gc); +} + +/***************************************************************************** + * MVEBU GPIO IRQ + * + * GPIO_IN_POL register controls whether GPIO_DATA_IN will hold the same + * value of the line or the opposite value. + * + * Level IRQ handlers: DATA_IN is used directly as cause register. + * Interrupt are masked by LEVEL_MASK registers. + * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE. + * Interrupt are masked by EDGE_MASK registers. + * Both-edge handlers: Similar to regular Edge handlers, but also swaps + * the polarity to catch the next line transaction. + * This is a race condition that might not perfectly + * work on some use cases. + * + * Every eight GPIO lines are grouped (OR'ed) before going up to main + * cause register. + * + * EDGE cause mask + * data-in /--------| |-----| |----\ + * -----| |----- ---- to main cause reg + * X \----------------| |----/ + * polarity LEVEL mask + * + ****************************************************************************/ + +static int mvebu_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct irq_chip_type *ct = irq_data_get_chip_type(d); + struct mvebu_gpio_chip *mvchip = gc->private; + int pin; + u32 u; + + pin = d->hwirq; + + regmap_read(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset, &u); + if ((u & BIT(pin)) == 0) + return -EINVAL; + + type &= IRQ_TYPE_SENSE_MASK; + if (type == IRQ_TYPE_NONE) + return -EINVAL; + + /* Check if we need to change chip and handler */ + if (!(ct->type & type)) + if (irq_setup_alt_chip(d, type)) + return -EINVAL; + + /* + * Configure interrupt polarity. + */ + switch (type) { + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_LEVEL_HIGH: + regmap_update_bits(mvchip->regs, + GPIO_IN_POL_OFF + mvchip->offset, + BIT(pin), 0); + break; + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_LEVEL_LOW: + regmap_update_bits(mvchip->regs, + GPIO_IN_POL_OFF + mvchip->offset, + BIT(pin), BIT(pin)); + break; + case IRQ_TYPE_EDGE_BOTH: { + u32 data_in, in_pol, val; + + regmap_read(mvchip->regs, + GPIO_IN_POL_OFF + mvchip->offset, &in_pol); + regmap_read(mvchip->regs, + GPIO_DATA_IN_OFF + mvchip->offset, &data_in); + + /* + * set initial polarity based on current input level + */ + if ((data_in ^ in_pol) & BIT(pin)) + val = BIT(pin); /* falling */ + else + val = 0; /* raising */ + + regmap_update_bits(mvchip->regs, + GPIO_IN_POL_OFF + mvchip->offset, + BIT(pin), val); + break; + } + } + return 0; +} + +static void mvebu_gpio_irq_handler(struct irq_desc *desc) +{ + struct mvebu_gpio_chip *mvchip = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + u32 cause, type, data_in, level_mask, edge_cause, edge_mask; + int i; + + if (mvchip == NULL) + return; + + chained_irq_enter(chip, desc); + + regmap_read(mvchip->regs, GPIO_DATA_IN_OFF + mvchip->offset, &data_in); + level_mask = mvebu_gpio_read_level_mask(mvchip); + edge_cause = mvebu_gpio_read_edge_cause(mvchip); + edge_mask = mvebu_gpio_read_edge_mask(mvchip); + + cause = (data_in & level_mask) | (edge_cause & edge_mask); + + for (i = 0; i < mvchip->chip.ngpio; i++) { + int irq; + + irq = irq_find_mapping(mvchip->domain, i); + + if (!(cause & BIT(i))) + continue; + + type = irq_get_trigger_type(irq); + if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { + /* Swap polarity (race with GPIO line) */ + u32 polarity; + + regmap_read(mvchip->regs, + GPIO_IN_POL_OFF + mvchip->offset, + &polarity); + polarity ^= BIT(i); + regmap_write(mvchip->regs, + GPIO_IN_POL_OFF + mvchip->offset, + polarity); + } + + generic_handle_irq(irq); + } + + chained_irq_exit(chip, desc); +} + +/* + * Functions implementing the pwm_chip methods + */ +static struct mvebu_pwm *to_mvebu_pwm(struct pwm_chip *chip) +{ + return container_of(chip, struct mvebu_pwm, chip); +} + +static int mvebu_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct mvebu_pwm *mvpwm = to_mvebu_pwm(chip); + struct mvebu_gpio_chip *mvchip = mvpwm->mvchip; + struct gpio_desc *desc; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&mvpwm->lock, flags); + + if (mvpwm->gpiod) { + ret = -EBUSY; + } else { + desc = gpiochip_request_own_desc(&mvchip->chip, + pwm->hwpwm, "mvebu-pwm"); + if (IS_ERR(desc)) { + ret = PTR_ERR(desc); + goto out; + } + + ret = gpiod_direction_output(desc, 0); + if (ret) { + gpiochip_free_own_desc(desc); + goto out; + } + + mvpwm->gpiod = desc; + } +out: + spin_unlock_irqrestore(&mvpwm->lock, flags); + return ret; +} + +static void mvebu_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct mvebu_pwm *mvpwm = to_mvebu_pwm(chip); + unsigned long flags; + + spin_lock_irqsave(&mvpwm->lock, flags); + gpiochip_free_own_desc(mvpwm->gpiod); + mvpwm->gpiod = NULL; + spin_unlock_irqrestore(&mvpwm->lock, flags); +} + +static void mvebu_pwm_get_state(struct pwm_chip *chip, + struct pwm_device *pwm, + struct pwm_state *state) { + + struct mvebu_pwm *mvpwm = to_mvebu_pwm(chip); + struct mvebu_gpio_chip *mvchip = mvpwm->mvchip; + unsigned long long val; + unsigned long flags; + u32 u; + + spin_lock_irqsave(&mvpwm->lock, flags); + + u = readl_relaxed(mvebu_pwmreg_blink_on_duration(mvpwm)); + val = (unsigned long long) u * NSEC_PER_SEC; + do_div(val, mvpwm->clk_rate); + if (val > UINT_MAX) + state->duty_cycle = UINT_MAX; + else if (val) + state->duty_cycle = val; + else + state->duty_cycle = 1; + + val = (unsigned long long) u; /* on duration */ + /* period = on + off duration */ + val += readl_relaxed(mvebu_pwmreg_blink_off_duration(mvpwm)); + val *= NSEC_PER_SEC; + do_div(val, mvpwm->clk_rate); + if (val > UINT_MAX) + state->period = UINT_MAX; + else if (val) + state->period = val; + else + state->period = 1; + + regmap_read(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset, &u); + if (u) + state->enabled = true; + else + state->enabled = false; + + spin_unlock_irqrestore(&mvpwm->lock, flags); +} + +static int mvebu_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, + struct pwm_state *state) +{ + struct mvebu_pwm *mvpwm = to_mvebu_pwm(chip); + struct mvebu_gpio_chip *mvchip = mvpwm->mvchip; + unsigned long long val; + unsigned long flags; + unsigned int on, off; + + if (state->polarity != PWM_POLARITY_NORMAL) + return -EINVAL; + + val = (unsigned long long) mvpwm->clk_rate * state->duty_cycle; + do_div(val, NSEC_PER_SEC); + if (val > UINT_MAX) + return -EINVAL; + if (val) + on = val; + else + on = 1; + + val = (unsigned long long) mvpwm->clk_rate * + (state->period - state->duty_cycle); + do_div(val, NSEC_PER_SEC); + if (val > UINT_MAX) + return -EINVAL; + if (val) + off = val; + else + off = 1; + + spin_lock_irqsave(&mvpwm->lock, flags); + + writel_relaxed(on, mvebu_pwmreg_blink_on_duration(mvpwm)); + writel_relaxed(off, mvebu_pwmreg_blink_off_duration(mvpwm)); + if (state->enabled) + mvebu_gpio_blink(&mvchip->chip, pwm->hwpwm, 1); + else + mvebu_gpio_blink(&mvchip->chip, pwm->hwpwm, 0); + + spin_unlock_irqrestore(&mvpwm->lock, flags); + + return 0; +} + +static const struct pwm_ops mvebu_pwm_ops = { + .request = mvebu_pwm_request, + .free = mvebu_pwm_free, + .get_state = mvebu_pwm_get_state, + .apply = mvebu_pwm_apply, + .owner = THIS_MODULE, +}; + +static void __maybe_unused mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip) +{ + struct mvebu_pwm *mvpwm = mvchip->mvpwm; + + regmap_read(mvchip->regs, GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset, + &mvpwm->blink_select); + mvpwm->blink_on_duration = + readl_relaxed(mvebu_pwmreg_blink_on_duration(mvpwm)); + mvpwm->blink_off_duration = + readl_relaxed(mvebu_pwmreg_blink_off_duration(mvpwm)); +} + +static void __maybe_unused mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip) +{ + struct mvebu_pwm *mvpwm = mvchip->mvpwm; + + regmap_write(mvchip->regs, GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset, + mvpwm->blink_select); + writel_relaxed(mvpwm->blink_on_duration, + mvebu_pwmreg_blink_on_duration(mvpwm)); + writel_relaxed(mvpwm->blink_off_duration, + mvebu_pwmreg_blink_off_duration(mvpwm)); +} + +static int mvebu_pwm_probe(struct platform_device *pdev, + struct mvebu_gpio_chip *mvchip, + int id) +{ + struct device *dev = &pdev->dev; + struct mvebu_pwm *mvpwm; + struct resource *res; + u32 set; + + if (!of_device_is_compatible(mvchip->chip.of_node, + "marvell,armada-370-gpio")) + return 0; + + /* + * There are only two sets of PWM configuration registers for + * all the GPIO lines on those SoCs which this driver reserves + * for the first two GPIO chips. So if the resource is missing + * we can't treat it as an error. + */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm"); + if (!res) + return 0; + + if (IS_ERR(mvchip->clk)) + return PTR_ERR(mvchip->clk); + + /* + * Use set A for lines of GPIO chip with id 0, B for GPIO chip + * with id 1. Don't allow further GPIO chips to be used for PWM. + */ + if (id == 0) + set = 0; + else if (id == 1) + set = U32_MAX; + else + return -EINVAL; + regmap_write(mvchip->regs, + GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset, set); + + mvpwm = devm_kzalloc(dev, sizeof(struct mvebu_pwm), GFP_KERNEL); + if (!mvpwm) + return -ENOMEM; + mvchip->mvpwm = mvpwm; + mvpwm->mvchip = mvchip; + + mvpwm->membase = devm_ioremap_resource(dev, res); + if (IS_ERR(mvpwm->membase)) + return PTR_ERR(mvpwm->membase); + + mvpwm->clk_rate = clk_get_rate(mvchip->clk); + if (!mvpwm->clk_rate) { + dev_err(dev, "failed to get clock rate\n"); + return -EINVAL; + } + + mvpwm->chip.dev = dev; + mvpwm->chip.ops = &mvebu_pwm_ops; + mvpwm->chip.npwm = mvchip->chip.ngpio; + /* + * There may already be some PWM allocated, so we can't force + * mvpwm->chip.base to a fixed point like mvchip->chip.base. + * So, we let pwmchip_add() do the numbering and take the next free + * region. + */ + mvpwm->chip.base = -1; + + spin_lock_init(&mvpwm->lock); + + return pwmchip_add(&mvpwm->chip); +} + +#ifdef CONFIG_DEBUG_FS +#include <linux/seq_file.h> + +static void mvebu_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip); + u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk; + int i; + + regmap_read(mvchip->regs, GPIO_OUT_OFF + mvchip->offset, &out); + regmap_read(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset, &io_conf); + regmap_read(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset, &blink); + regmap_read(mvchip->regs, GPIO_IN_POL_OFF + mvchip->offset, &in_pol); + regmap_read(mvchip->regs, GPIO_DATA_IN_OFF + mvchip->offset, &data_in); + cause = mvebu_gpio_read_edge_cause(mvchip); + edg_msk = mvebu_gpio_read_edge_mask(mvchip); + lvl_msk = mvebu_gpio_read_level_mask(mvchip); + + for (i = 0; i < chip->ngpio; i++) { + const char *label; + u32 msk; + bool is_out; + + label = gpiochip_is_requested(chip, i); + if (!label) + continue; + + msk = BIT(i); + is_out = !(io_conf & msk); + + seq_printf(s, " gpio-%-3d (%-20.20s)", chip->base + i, label); + + if (is_out) { + seq_printf(s, " out %s %s\n", + out & msk ? "hi" : "lo", + blink & msk ? "(blink )" : ""); + continue; + } + + seq_printf(s, " in %s (act %s) - IRQ", + (data_in ^ in_pol) & msk ? "hi" : "lo", + in_pol & msk ? "lo" : "hi"); + if (!((edg_msk | lvl_msk) & msk)) { + seq_puts(s, " disabled\n"); + continue; + } + if (edg_msk & msk) + seq_puts(s, " edge "); + if (lvl_msk & msk) + seq_puts(s, " level"); + seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear "); + } +} +#else +#define mvebu_gpio_dbg_show NULL +#endif + +static const struct of_device_id mvebu_gpio_of_match[] = { + { + .compatible = "marvell,orion-gpio", + .data = (void *) MVEBU_GPIO_SOC_VARIANT_ORION, + }, + { + .compatible = "marvell,mv78200-gpio", + .data = (void *) MVEBU_GPIO_SOC_VARIANT_MV78200, + }, + { + .compatible = "marvell,armadaxp-gpio", + .data = (void *) MVEBU_GPIO_SOC_VARIANT_ARMADAXP, + }, + { + .compatible = "marvell,armada-370-gpio", + .data = (void *) MVEBU_GPIO_SOC_VARIANT_ORION, + }, + { + .compatible = "marvell,armada-8k-gpio", + .data = (void *) MVEBU_GPIO_SOC_VARIANT_A8K, + }, + { + /* sentinel */ + }, +}; + +static int mvebu_gpio_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct mvebu_gpio_chip *mvchip = platform_get_drvdata(pdev); + int i; + + regmap_read(mvchip->regs, GPIO_OUT_OFF + mvchip->offset, + &mvchip->out_reg); + regmap_read(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset, + &mvchip->io_conf_reg); + regmap_read(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset, + &mvchip->blink_en_reg); + regmap_read(mvchip->regs, GPIO_IN_POL_OFF + mvchip->offset, + &mvchip->in_pol_reg); + + switch (mvchip->soc_variant) { + case MVEBU_GPIO_SOC_VARIANT_ORION: + case MVEBU_GPIO_SOC_VARIANT_A8K: + regmap_read(mvchip->regs, GPIO_EDGE_MASK_OFF + mvchip->offset, + &mvchip->edge_mask_regs[0]); + regmap_read(mvchip->regs, GPIO_LEVEL_MASK_OFF + mvchip->offset, + &mvchip->level_mask_regs[0]); + break; + case MVEBU_GPIO_SOC_VARIANT_MV78200: + for (i = 0; i < 2; i++) { + regmap_read(mvchip->regs, + GPIO_EDGE_MASK_MV78200_OFF(i), + &mvchip->edge_mask_regs[i]); + regmap_read(mvchip->regs, + GPIO_LEVEL_MASK_MV78200_OFF(i), + &mvchip->level_mask_regs[i]); + } + break; + case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: + for (i = 0; i < 4; i++) { + regmap_read(mvchip->regs, + GPIO_EDGE_MASK_ARMADAXP_OFF(i), + &mvchip->edge_mask_regs[i]); + regmap_read(mvchip->regs, + GPIO_LEVEL_MASK_ARMADAXP_OFF(i), + &mvchip->level_mask_regs[i]); + } + break; + default: + BUG(); + } + + if (IS_ENABLED(CONFIG_PWM)) + mvebu_pwm_suspend(mvchip); + + return 0; +} + +static int mvebu_gpio_resume(struct platform_device *pdev) +{ + struct mvebu_gpio_chip *mvchip = platform_get_drvdata(pdev); + int i; + + regmap_write(mvchip->regs, GPIO_OUT_OFF + mvchip->offset, + mvchip->out_reg); + regmap_write(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset, + mvchip->io_conf_reg); + regmap_write(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset, + mvchip->blink_en_reg); + regmap_write(mvchip->regs, GPIO_IN_POL_OFF + mvchip->offset, + mvchip->in_pol_reg); + + switch (mvchip->soc_variant) { + case MVEBU_GPIO_SOC_VARIANT_ORION: + case MVEBU_GPIO_SOC_VARIANT_A8K: + regmap_write(mvchip->regs, GPIO_EDGE_MASK_OFF + mvchip->offset, + mvchip->edge_mask_regs[0]); + regmap_write(mvchip->regs, GPIO_LEVEL_MASK_OFF + mvchip->offset, + mvchip->level_mask_regs[0]); + break; + case MVEBU_GPIO_SOC_VARIANT_MV78200: + for (i = 0; i < 2; i++) { + regmap_write(mvchip->regs, + GPIO_EDGE_MASK_MV78200_OFF(i), + mvchip->edge_mask_regs[i]); + regmap_write(mvchip->regs, + GPIO_LEVEL_MASK_MV78200_OFF(i), + mvchip->level_mask_regs[i]); + } + break; + case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: + for (i = 0; i < 4; i++) { + regmap_write(mvchip->regs, + GPIO_EDGE_MASK_ARMADAXP_OFF(i), + mvchip->edge_mask_regs[i]); + regmap_write(mvchip->regs, + GPIO_LEVEL_MASK_ARMADAXP_OFF(i), + mvchip->level_mask_regs[i]); + } + break; + default: + BUG(); + } + + if (IS_ENABLED(CONFIG_PWM)) + mvebu_pwm_resume(mvchip); + + return 0; +} + +static const struct regmap_config mvebu_gpio_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .fast_io = true, +}; + +static int mvebu_gpio_probe_raw(struct platform_device *pdev, + struct mvebu_gpio_chip *mvchip) +{ + struct resource *res; + void __iomem *base; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + mvchip->regs = devm_regmap_init_mmio(&pdev->dev, base, + &mvebu_gpio_regmap_config); + if (IS_ERR(mvchip->regs)) + return PTR_ERR(mvchip->regs); + + /* + * For the legacy SoCs, the regmap directly maps to the GPIO + * registers, so no offset is needed. + */ + mvchip->offset = 0; + + /* + * The Armada XP has a second range of registers for the + * per-CPU registers + */ + if (mvchip->soc_variant == MVEBU_GPIO_SOC_VARIANT_ARMADAXP) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + mvchip->percpu_regs = + devm_regmap_init_mmio(&pdev->dev, base, + &mvebu_gpio_regmap_config); + if (IS_ERR(mvchip->percpu_regs)) + return PTR_ERR(mvchip->percpu_regs); + } + + return 0; +} + +static int mvebu_gpio_probe_syscon(struct platform_device *pdev, + struct mvebu_gpio_chip *mvchip) +{ + mvchip->regs = syscon_node_to_regmap(pdev->dev.parent->of_node); + if (IS_ERR(mvchip->regs)) + return PTR_ERR(mvchip->regs); + + if (of_property_read_u32(pdev->dev.of_node, "offset", &mvchip->offset)) + return -EINVAL; + + return 0; +} + +static int mvebu_gpio_probe(struct platform_device *pdev) +{ + struct mvebu_gpio_chip *mvchip; + const struct of_device_id *match; + struct device_node *np = pdev->dev.of_node; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + unsigned int ngpios; + bool have_irqs; + int soc_variant; + int i, cpu, id; + int err; + + match = of_match_device(mvebu_gpio_of_match, &pdev->dev); + if (match) + soc_variant = (unsigned long) match->data; + else + soc_variant = MVEBU_GPIO_SOC_VARIANT_ORION; + + /* Some gpio controllers do not provide irq support */ + have_irqs = of_irq_count(np) != 0; + + mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip), + GFP_KERNEL); + if (!mvchip) + return -ENOMEM; + + platform_set_drvdata(pdev, mvchip); + + if (of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpios)) { + dev_err(&pdev->dev, "Missing ngpios OF property\n"); + return -ENODEV; + } + + id = of_alias_get_id(pdev->dev.of_node, "gpio"); + if (id < 0) { + dev_err(&pdev->dev, "Couldn't get OF id\n"); + return id; + } + + mvchip->clk = devm_clk_get(&pdev->dev, NULL); + /* Not all SoCs require a clock.*/ + if (!IS_ERR(mvchip->clk)) + clk_prepare_enable(mvchip->clk); + + mvchip->soc_variant = soc_variant; + mvchip->chip.label = dev_name(&pdev->dev); + mvchip->chip.parent = &pdev->dev; + mvchip->chip.request = gpiochip_generic_request; + mvchip->chip.free = gpiochip_generic_free; + mvchip->chip.direction_input = mvebu_gpio_direction_input; + mvchip->chip.get = mvebu_gpio_get; + mvchip->chip.direction_output = mvebu_gpio_direction_output; + mvchip->chip.set = mvebu_gpio_set; + if (have_irqs) + mvchip->chip.to_irq = mvebu_gpio_to_irq; + mvchip->chip.base = id * MVEBU_MAX_GPIO_PER_BANK; + mvchip->chip.ngpio = ngpios; + mvchip->chip.can_sleep = false; + mvchip->chip.of_node = np; + mvchip->chip.dbg_show = mvebu_gpio_dbg_show; + + if (soc_variant == MVEBU_GPIO_SOC_VARIANT_A8K) + err = mvebu_gpio_probe_syscon(pdev, mvchip); + else + err = mvebu_gpio_probe_raw(pdev, mvchip); + + if (err) + return err; + + /* + * Mask and clear GPIO interrupts. + */ + switch (soc_variant) { + case MVEBU_GPIO_SOC_VARIANT_ORION: + case MVEBU_GPIO_SOC_VARIANT_A8K: + regmap_write(mvchip->regs, + GPIO_EDGE_CAUSE_OFF + mvchip->offset, 0); + regmap_write(mvchip->regs, + GPIO_EDGE_MASK_OFF + mvchip->offset, 0); + regmap_write(mvchip->regs, + GPIO_LEVEL_MASK_OFF + mvchip->offset, 0); + break; + case MVEBU_GPIO_SOC_VARIANT_MV78200: + regmap_write(mvchip->regs, GPIO_EDGE_CAUSE_OFF, 0); + for (cpu = 0; cpu < 2; cpu++) { + regmap_write(mvchip->regs, + GPIO_EDGE_MASK_MV78200_OFF(cpu), 0); + regmap_write(mvchip->regs, + GPIO_LEVEL_MASK_MV78200_OFF(cpu), 0); + } + break; + case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: + regmap_write(mvchip->regs, GPIO_EDGE_CAUSE_OFF, 0); + regmap_write(mvchip->regs, GPIO_EDGE_MASK_OFF, 0); + regmap_write(mvchip->regs, GPIO_LEVEL_MASK_OFF, 0); + for (cpu = 0; cpu < 4; cpu++) { + regmap_write(mvchip->percpu_regs, + GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu), 0); + regmap_write(mvchip->percpu_regs, + GPIO_EDGE_MASK_ARMADAXP_OFF(cpu), 0); + regmap_write(mvchip->percpu_regs, + GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu), 0); + } + break; + default: + BUG(); + } + + devm_gpiochip_add_data(&pdev->dev, &mvchip->chip, mvchip); + + /* Some MVEBU SoCs have simple PWM support for GPIO lines */ + if (IS_ENABLED(CONFIG_PWM)) { + err = mvebu_pwm_probe(pdev, mvchip, id); + if (err) + return err; + } + + /* Some gpio controllers do not provide irq support */ + if (!have_irqs) + return 0; + + mvchip->domain = + irq_domain_add_linear(np, ngpios, &irq_generic_chip_ops, NULL); + if (!mvchip->domain) { + dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n", + mvchip->chip.label); + err = -ENODEV; + goto err_pwm; + } + + err = irq_alloc_domain_generic_chips( + mvchip->domain, ngpios, 2, np->name, handle_level_irq, + IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_LEVEL, 0, 0); + if (err) { + dev_err(&pdev->dev, "couldn't allocate irq chips %s (DT).\n", + mvchip->chip.label); + goto err_domain; + } + + /* + * NOTE: The common accessors cannot be used because of the percpu + * access to the mask registers + */ + gc = irq_get_domain_generic_chip(mvchip->domain, 0); + gc->private = mvchip; + ct = &gc->chip_types[0]; + ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; + ct->chip.irq_mask = mvebu_gpio_level_irq_mask; + ct->chip.irq_unmask = mvebu_gpio_level_irq_unmask; + ct->chip.irq_set_type = mvebu_gpio_irq_set_type; + ct->chip.name = mvchip->chip.label; + + ct = &gc->chip_types[1]; + ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + ct->chip.irq_ack = mvebu_gpio_irq_ack; + ct->chip.irq_mask = mvebu_gpio_edge_irq_mask; + ct->chip.irq_unmask = mvebu_gpio_edge_irq_unmask; + ct->chip.irq_set_type = mvebu_gpio_irq_set_type; + ct->handler = handle_edge_irq; + ct->chip.name = mvchip->chip.label; + + /* + * Setup the interrupt handlers. Each chip can have up to 4 + * interrupt handlers, with each handler dealing with 8 GPIO + * pins. + */ + for (i = 0; i < 4; i++) { + int irq = platform_get_irq(pdev, i); + + if (irq < 0) + continue; + irq_set_chained_handler_and_data(irq, mvebu_gpio_irq_handler, + mvchip); + } + + return 0; + +err_domain: + irq_domain_remove(mvchip->domain); +err_pwm: + pwmchip_remove(&mvchip->mvpwm->chip); + + return err; +} + +static struct platform_driver mvebu_gpio_driver = { + .driver = { + .name = "mvebu-gpio", + .of_match_table = mvebu_gpio_of_match, + }, + .probe = mvebu_gpio_probe, + .suspend = mvebu_gpio_suspend, + .resume = mvebu_gpio_resume, +}; +builtin_platform_driver(mvebu_gpio_driver); diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c new file mode 100644 index 000000000..e86e61dda --- /dev/null +++ b/drivers/gpio/gpio-mxc.c @@ -0,0 +1,607 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> +// Copyright 2008 Juergen Beisert, kernel@pengutronix.de +// +// Based on code from Freescale Semiconductor, +// Authors: Daniel Mack, Juergen Beisert. +// Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/syscore_ops.h> +#include <linux/gpio/driver.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/bug.h> + +enum mxc_gpio_hwtype { + IMX1_GPIO, /* runs on i.mx1 */ + IMX21_GPIO, /* runs on i.mx21 and i.mx27 */ + IMX31_GPIO, /* runs on i.mx31 */ + IMX35_GPIO, /* runs on all other i.mx */ +}; + +/* device type dependent stuff */ +struct mxc_gpio_hwdata { + unsigned dr_reg; + unsigned gdir_reg; + unsigned psr_reg; + unsigned icr1_reg; + unsigned icr2_reg; + unsigned imr_reg; + unsigned isr_reg; + int edge_sel_reg; + unsigned low_level; + unsigned high_level; + unsigned rise_edge; + unsigned fall_edge; +}; + +struct mxc_gpio_reg_saved { + u32 icr1; + u32 icr2; + u32 imr; + u32 gdir; + u32 edge_sel; + u32 dr; +}; + +struct mxc_gpio_port { + struct list_head node; + void __iomem *base; + struct clk *clk; + int irq; + int irq_high; + struct irq_domain *domain; + struct gpio_chip gc; + struct device *dev; + u32 both_edges; + struct mxc_gpio_reg_saved gpio_saved_reg; + bool power_off; +}; + +static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = { + .dr_reg = 0x1c, + .gdir_reg = 0x00, + .psr_reg = 0x24, + .icr1_reg = 0x28, + .icr2_reg = 0x2c, + .imr_reg = 0x30, + .isr_reg = 0x34, + .edge_sel_reg = -EINVAL, + .low_level = 0x03, + .high_level = 0x02, + .rise_edge = 0x00, + .fall_edge = 0x01, +}; + +static struct mxc_gpio_hwdata imx31_gpio_hwdata = { + .dr_reg = 0x00, + .gdir_reg = 0x04, + .psr_reg = 0x08, + .icr1_reg = 0x0c, + .icr2_reg = 0x10, + .imr_reg = 0x14, + .isr_reg = 0x18, + .edge_sel_reg = -EINVAL, + .low_level = 0x00, + .high_level = 0x01, + .rise_edge = 0x02, + .fall_edge = 0x03, +}; + +static struct mxc_gpio_hwdata imx35_gpio_hwdata = { + .dr_reg = 0x00, + .gdir_reg = 0x04, + .psr_reg = 0x08, + .icr1_reg = 0x0c, + .icr2_reg = 0x10, + .imr_reg = 0x14, + .isr_reg = 0x18, + .edge_sel_reg = 0x1c, + .low_level = 0x00, + .high_level = 0x01, + .rise_edge = 0x02, + .fall_edge = 0x03, +}; + +static enum mxc_gpio_hwtype mxc_gpio_hwtype; +static struct mxc_gpio_hwdata *mxc_gpio_hwdata; + +#define GPIO_DR (mxc_gpio_hwdata->dr_reg) +#define GPIO_GDIR (mxc_gpio_hwdata->gdir_reg) +#define GPIO_PSR (mxc_gpio_hwdata->psr_reg) +#define GPIO_ICR1 (mxc_gpio_hwdata->icr1_reg) +#define GPIO_ICR2 (mxc_gpio_hwdata->icr2_reg) +#define GPIO_IMR (mxc_gpio_hwdata->imr_reg) +#define GPIO_ISR (mxc_gpio_hwdata->isr_reg) +#define GPIO_EDGE_SEL (mxc_gpio_hwdata->edge_sel_reg) + +#define GPIO_INT_LOW_LEV (mxc_gpio_hwdata->low_level) +#define GPIO_INT_HIGH_LEV (mxc_gpio_hwdata->high_level) +#define GPIO_INT_RISE_EDGE (mxc_gpio_hwdata->rise_edge) +#define GPIO_INT_FALL_EDGE (mxc_gpio_hwdata->fall_edge) +#define GPIO_INT_BOTH_EDGES 0x4 + +static const struct platform_device_id mxc_gpio_devtype[] = { + { + .name = "imx1-gpio", + .driver_data = IMX1_GPIO, + }, { + .name = "imx21-gpio", + .driver_data = IMX21_GPIO, + }, { + .name = "imx31-gpio", + .driver_data = IMX31_GPIO, + }, { + .name = "imx35-gpio", + .driver_data = IMX35_GPIO, + }, { + /* sentinel */ + } +}; + +static const struct of_device_id mxc_gpio_dt_ids[] = { + { .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], }, + { .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], }, + { .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], }, + { .compatible = "fsl,imx35-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], }, + { .compatible = "fsl,imx7d-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], }, + { /* sentinel */ } +}; + +/* + * MX2 has one interrupt *for all* gpio ports. The list is used + * to save the references to all ports, so that mx2_gpio_irq_handler + * can walk through all interrupt status registers. + */ +static LIST_HEAD(mxc_gpio_ports); + +/* Note: This driver assumes 32 GPIOs are handled in one register */ + +static int gpio_set_irq_type(struct irq_data *d, u32 type) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mxc_gpio_port *port = gc->private; + u32 bit, val; + u32 gpio_idx = d->hwirq; + int edge; + void __iomem *reg = port->base; + + port->both_edges &= ~(1 << gpio_idx); + switch (type) { + case IRQ_TYPE_EDGE_RISING: + edge = GPIO_INT_RISE_EDGE; + break; + case IRQ_TYPE_EDGE_FALLING: + edge = GPIO_INT_FALL_EDGE; + break; + case IRQ_TYPE_EDGE_BOTH: + if (GPIO_EDGE_SEL >= 0) { + edge = GPIO_INT_BOTH_EDGES; + } else { + val = port->gc.get(&port->gc, gpio_idx); + if (val) { + edge = GPIO_INT_LOW_LEV; + pr_debug("mxc: set GPIO %d to low trigger\n", gpio_idx); + } else { + edge = GPIO_INT_HIGH_LEV; + pr_debug("mxc: set GPIO %d to high trigger\n", gpio_idx); + } + port->both_edges |= 1 << gpio_idx; + } + break; + case IRQ_TYPE_LEVEL_LOW: + edge = GPIO_INT_LOW_LEV; + break; + case IRQ_TYPE_LEVEL_HIGH: + edge = GPIO_INT_HIGH_LEV; + break; + default: + return -EINVAL; + } + + if (GPIO_EDGE_SEL >= 0) { + val = readl(port->base + GPIO_EDGE_SEL); + if (edge == GPIO_INT_BOTH_EDGES) + writel(val | (1 << gpio_idx), + port->base + GPIO_EDGE_SEL); + else + writel(val & ~(1 << gpio_idx), + port->base + GPIO_EDGE_SEL); + } + + if (edge != GPIO_INT_BOTH_EDGES) { + reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* lower or upper register */ + bit = gpio_idx & 0xf; + val = readl(reg) & ~(0x3 << (bit << 1)); + writel(val | (edge << (bit << 1)), reg); + } + + writel(1 << gpio_idx, port->base + GPIO_ISR); + + return 0; +} + +static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) +{ + void __iomem *reg = port->base; + u32 bit, val; + int edge; + + reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ + bit = gpio & 0xf; + val = readl(reg); + edge = (val >> (bit << 1)) & 3; + val &= ~(0x3 << (bit << 1)); + if (edge == GPIO_INT_HIGH_LEV) { + edge = GPIO_INT_LOW_LEV; + pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); + } else if (edge == GPIO_INT_LOW_LEV) { + edge = GPIO_INT_HIGH_LEV; + pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); + } else { + pr_err("mxc: invalid configuration for GPIO %d: %x\n", + gpio, edge); + return; + } + writel(val | (edge << (bit << 1)), reg); +} + +/* handle 32 interrupts in one status register */ +static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) +{ + while (irq_stat != 0) { + int irqoffset = fls(irq_stat) - 1; + + if (port->both_edges & (1 << irqoffset)) + mxc_flip_edge(port, irqoffset); + + generic_handle_irq(irq_find_mapping(port->domain, irqoffset)); + + irq_stat &= ~(1 << irqoffset); + } +} + +/* MX1 and MX3 has one interrupt *per* gpio port */ +static void mx3_gpio_irq_handler(struct irq_desc *desc) +{ + u32 irq_stat; + struct mxc_gpio_port *port = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + + chained_irq_enter(chip, desc); + + irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR); + + mxc_gpio_irq_handler(port, irq_stat); + + chained_irq_exit(chip, desc); +} + +/* MX2 has one interrupt *for all* gpio ports */ +static void mx2_gpio_irq_handler(struct irq_desc *desc) +{ + u32 irq_msk, irq_stat; + struct mxc_gpio_port *port; + struct irq_chip *chip = irq_desc_get_chip(desc); + + chained_irq_enter(chip, desc); + + /* walk through all interrupt status registers */ + list_for_each_entry(port, &mxc_gpio_ports, node) { + irq_msk = readl(port->base + GPIO_IMR); + if (!irq_msk) + continue; + + irq_stat = readl(port->base + GPIO_ISR) & irq_msk; + if (irq_stat) + mxc_gpio_irq_handler(port, irq_stat); + } + chained_irq_exit(chip, desc); +} + +/* + * Set interrupt number "irq" in the GPIO as a wake-up source. + * While system is running, all registered GPIO interrupts need to have + * wake-up enabled. When system is suspended, only selected GPIO interrupts + * need to have wake-up enabled. + * @param irq interrupt source number + * @param enable enable as wake-up if equal to non-zero + * @return This function returns 0 on success. + */ +static int gpio_set_wake_irq(struct irq_data *d, u32 enable) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mxc_gpio_port *port = gc->private; + u32 gpio_idx = d->hwirq; + int ret; + + if (enable) { + if (port->irq_high && (gpio_idx >= 16)) + ret = enable_irq_wake(port->irq_high); + else + ret = enable_irq_wake(port->irq); + } else { + if (port->irq_high && (gpio_idx >= 16)) + ret = disable_irq_wake(port->irq_high); + else + ret = disable_irq_wake(port->irq); + } + + return ret; +} + +static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + int rv; + + gc = devm_irq_alloc_generic_chip(port->dev, "gpio-mxc", 1, irq_base, + port->base, handle_level_irq); + if (!gc) + return -ENOMEM; + gc->private = port; + + ct = gc->chip_types; + ct->chip.irq_ack = irq_gc_ack_set_bit; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->chip.irq_set_type = gpio_set_irq_type; + ct->chip.irq_set_wake = gpio_set_wake_irq; + ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND; + ct->regs.ack = GPIO_ISR; + ct->regs.mask = GPIO_IMR; + + rv = devm_irq_setup_generic_chip(port->dev, gc, IRQ_MSK(32), + IRQ_GC_INIT_NESTED_LOCK, + IRQ_NOREQUEST, 0); + + return rv; +} + +static void mxc_gpio_get_hw(struct platform_device *pdev) +{ + const struct of_device_id *of_id = + of_match_device(mxc_gpio_dt_ids, &pdev->dev); + enum mxc_gpio_hwtype hwtype; + + if (of_id) + pdev->id_entry = of_id->data; + hwtype = pdev->id_entry->driver_data; + + if (mxc_gpio_hwtype) { + /* + * The driver works with a reasonable presupposition, + * that is all gpio ports must be the same type when + * running on one soc. + */ + BUG_ON(mxc_gpio_hwtype != hwtype); + return; + } + + if (hwtype == IMX35_GPIO) + mxc_gpio_hwdata = &imx35_gpio_hwdata; + else if (hwtype == IMX31_GPIO) + mxc_gpio_hwdata = &imx31_gpio_hwdata; + else + mxc_gpio_hwdata = &imx1_imx21_gpio_hwdata; + + mxc_gpio_hwtype = hwtype; +} + +static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct mxc_gpio_port *port = gpiochip_get_data(gc); + + return irq_find_mapping(port->domain, offset); +} + +static int mxc_gpio_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct mxc_gpio_port *port; + struct resource *iores; + int irq_base; + int err; + + mxc_gpio_get_hw(pdev); + + port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + port->dev = &pdev->dev; + + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + port->base = devm_ioremap_resource(&pdev->dev, iores); + if (IS_ERR(port->base)) + return PTR_ERR(port->base); + + port->irq_high = platform_get_irq(pdev, 1); + if (port->irq_high < 0) + port->irq_high = 0; + + port->irq = platform_get_irq(pdev, 0); + if (port->irq < 0) + return port->irq; + + /* the controller clock is optional */ + port->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(port->clk)) { + if (PTR_ERR(port->clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + port->clk = NULL; + } + + err = clk_prepare_enable(port->clk); + if (err) { + dev_err(&pdev->dev, "Unable to enable clock.\n"); + return err; + } + + if (of_device_is_compatible(np, "fsl,imx7d-gpio")) + port->power_off = true; + + /* disable the interrupt and clear the status */ + writel(0, port->base + GPIO_IMR); + writel(~0, port->base + GPIO_ISR); + + if (mxc_gpio_hwtype == IMX21_GPIO) { + /* + * Setup one handler for all GPIO interrupts. Actually setting + * the handler is needed only once, but doing it for every port + * is more robust and easier. + */ + irq_set_chained_handler(port->irq, mx2_gpio_irq_handler); + } else { + /* setup one handler for each entry */ + irq_set_chained_handler_and_data(port->irq, + mx3_gpio_irq_handler, port); + if (port->irq_high > 0) + /* setup handler for GPIO 16 to 31 */ + irq_set_chained_handler_and_data(port->irq_high, + mx3_gpio_irq_handler, + port); + } + + err = bgpio_init(&port->gc, &pdev->dev, 4, + port->base + GPIO_PSR, + port->base + GPIO_DR, NULL, + port->base + GPIO_GDIR, NULL, + BGPIOF_READ_OUTPUT_REG_SET); + if (err) + goto out_bgio; + + if (of_property_read_bool(np, "gpio-ranges")) { + port->gc.request = gpiochip_generic_request; + port->gc.free = gpiochip_generic_free; + } + + port->gc.to_irq = mxc_gpio_to_irq; + port->gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 : + pdev->id * 32; + + err = devm_gpiochip_add_data(&pdev->dev, &port->gc, port); + if (err) + goto out_bgio; + + irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id()); + if (irq_base < 0) { + err = irq_base; + goto out_bgio; + } + + port->domain = irq_domain_add_legacy(np, 32, irq_base, 0, + &irq_domain_simple_ops, NULL); + if (!port->domain) { + err = -ENODEV; + goto out_bgio; + } + + /* gpio-mxc can be a generic irq chip */ + err = mxc_gpio_init_gc(port, irq_base); + if (err < 0) + goto out_irqdomain_remove; + + list_add_tail(&port->node, &mxc_gpio_ports); + + platform_set_drvdata(pdev, port); + + return 0; + +out_irqdomain_remove: + irq_domain_remove(port->domain); +out_bgio: + clk_disable_unprepare(port->clk); + dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err); + return err; +} + +static void mxc_gpio_save_regs(struct mxc_gpio_port *port) +{ + if (!port->power_off) + return; + + port->gpio_saved_reg.icr1 = readl(port->base + GPIO_ICR1); + port->gpio_saved_reg.icr2 = readl(port->base + GPIO_ICR2); + port->gpio_saved_reg.imr = readl(port->base + GPIO_IMR); + port->gpio_saved_reg.gdir = readl(port->base + GPIO_GDIR); + port->gpio_saved_reg.edge_sel = readl(port->base + GPIO_EDGE_SEL); + port->gpio_saved_reg.dr = readl(port->base + GPIO_DR); +} + +static void mxc_gpio_restore_regs(struct mxc_gpio_port *port) +{ + if (!port->power_off) + return; + + writel(port->gpio_saved_reg.icr1, port->base + GPIO_ICR1); + writel(port->gpio_saved_reg.icr2, port->base + GPIO_ICR2); + writel(port->gpio_saved_reg.imr, port->base + GPIO_IMR); + writel(port->gpio_saved_reg.gdir, port->base + GPIO_GDIR); + writel(port->gpio_saved_reg.edge_sel, port->base + GPIO_EDGE_SEL); + writel(port->gpio_saved_reg.dr, port->base + GPIO_DR); +} + +static int mxc_gpio_syscore_suspend(void) +{ + struct mxc_gpio_port *port; + + /* walk through all ports */ + list_for_each_entry(port, &mxc_gpio_ports, node) { + mxc_gpio_save_regs(port); + clk_disable_unprepare(port->clk); + } + + return 0; +} + +static void mxc_gpio_syscore_resume(void) +{ + struct mxc_gpio_port *port; + int ret; + + /* walk through all ports */ + list_for_each_entry(port, &mxc_gpio_ports, node) { + ret = clk_prepare_enable(port->clk); + if (ret) { + pr_err("mxc: failed to enable gpio clock %d\n", ret); + return; + } + mxc_gpio_restore_regs(port); + } +} + +static struct syscore_ops mxc_gpio_syscore_ops = { + .suspend = mxc_gpio_syscore_suspend, + .resume = mxc_gpio_syscore_resume, +}; + +static struct platform_driver mxc_gpio_driver = { + .driver = { + .name = "gpio-mxc", + .of_match_table = mxc_gpio_dt_ids, + .suppress_bind_attrs = true, + }, + .probe = mxc_gpio_probe, + .id_table = mxc_gpio_devtype, +}; + +static int __init gpio_mxc_init(void) +{ + register_syscore_ops(&mxc_gpio_syscore_ops); + + return platform_driver_register(&mxc_gpio_driver); +} +subsys_initcall(gpio_mxc_init); diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c new file mode 100644 index 000000000..ea874fd03 --- /dev/null +++ b/drivers/gpio/gpio-mxs.c @@ -0,0 +1,383 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> +// Copyright 2008 Juergen Beisert, kernel@pengutronix.de +// +// Based on code from Freescale, +// Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/gpio/driver.h> +#include <linux/module.h> + +#define MXS_SET 0x4 +#define MXS_CLR 0x8 + +#define PINCTRL_DOUT(p) ((is_imx23_gpio(p) ? 0x0500 : 0x0700) + (p->id) * 0x10) +#define PINCTRL_DIN(p) ((is_imx23_gpio(p) ? 0x0600 : 0x0900) + (p->id) * 0x10) +#define PINCTRL_DOE(p) ((is_imx23_gpio(p) ? 0x0700 : 0x0b00) + (p->id) * 0x10) +#define PINCTRL_PIN2IRQ(p) ((is_imx23_gpio(p) ? 0x0800 : 0x1000) + (p->id) * 0x10) +#define PINCTRL_IRQEN(p) ((is_imx23_gpio(p) ? 0x0900 : 0x1100) + (p->id) * 0x10) +#define PINCTRL_IRQLEV(p) ((is_imx23_gpio(p) ? 0x0a00 : 0x1200) + (p->id) * 0x10) +#define PINCTRL_IRQPOL(p) ((is_imx23_gpio(p) ? 0x0b00 : 0x1300) + (p->id) * 0x10) +#define PINCTRL_IRQSTAT(p) ((is_imx23_gpio(p) ? 0x0c00 : 0x1400) + (p->id) * 0x10) + +#define GPIO_INT_FALL_EDGE 0x0 +#define GPIO_INT_LOW_LEV 0x1 +#define GPIO_INT_RISE_EDGE 0x2 +#define GPIO_INT_HIGH_LEV 0x3 +#define GPIO_INT_LEV_MASK (1 << 0) +#define GPIO_INT_POL_MASK (1 << 1) + +enum mxs_gpio_id { + IMX23_GPIO, + IMX28_GPIO, +}; + +struct mxs_gpio_port { + void __iomem *base; + int id; + int irq; + struct irq_domain *domain; + struct gpio_chip gc; + struct device *dev; + enum mxs_gpio_id devid; + u32 both_edges; +}; + +static inline int is_imx23_gpio(struct mxs_gpio_port *port) +{ + return port->devid == IMX23_GPIO; +} + +static inline int is_imx28_gpio(struct mxs_gpio_port *port) +{ + return port->devid == IMX28_GPIO; +} + +/* Note: This driver assumes 32 GPIOs are handled in one register */ + +static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) +{ + u32 val; + u32 pin_mask = 1 << d->hwirq; + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct irq_chip_type *ct = irq_data_get_chip_type(d); + struct mxs_gpio_port *port = gc->private; + void __iomem *pin_addr; + int edge; + + if (!(ct->type & type)) + if (irq_setup_alt_chip(d, type)) + return -EINVAL; + + port->both_edges &= ~pin_mask; + switch (type) { + case IRQ_TYPE_EDGE_BOTH: + val = port->gc.get(&port->gc, d->hwirq); + if (val) + edge = GPIO_INT_FALL_EDGE; + else + edge = GPIO_INT_RISE_EDGE; + port->both_edges |= pin_mask; + break; + case IRQ_TYPE_EDGE_RISING: + edge = GPIO_INT_RISE_EDGE; + break; + case IRQ_TYPE_EDGE_FALLING: + edge = GPIO_INT_FALL_EDGE; + break; + case IRQ_TYPE_LEVEL_LOW: + edge = GPIO_INT_LOW_LEV; + break; + case IRQ_TYPE_LEVEL_HIGH: + edge = GPIO_INT_HIGH_LEV; + break; + default: + return -EINVAL; + } + + /* set level or edge */ + pin_addr = port->base + PINCTRL_IRQLEV(port); + if (edge & GPIO_INT_LEV_MASK) { + writel(pin_mask, pin_addr + MXS_SET); + writel(pin_mask, port->base + PINCTRL_IRQEN(port) + MXS_SET); + } else { + writel(pin_mask, pin_addr + MXS_CLR); + writel(pin_mask, port->base + PINCTRL_PIN2IRQ(port) + MXS_SET); + } + + /* set polarity */ + pin_addr = port->base + PINCTRL_IRQPOL(port); + if (edge & GPIO_INT_POL_MASK) + writel(pin_mask, pin_addr + MXS_SET); + else + writel(pin_mask, pin_addr + MXS_CLR); + + writel(pin_mask, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR); + + return 0; +} + +static void mxs_flip_edge(struct mxs_gpio_port *port, u32 gpio) +{ + u32 bit, val, edge; + void __iomem *pin_addr; + + bit = 1 << gpio; + + pin_addr = port->base + PINCTRL_IRQPOL(port); + val = readl(pin_addr); + edge = val & bit; + + if (edge) + writel(bit, pin_addr + MXS_CLR); + else + writel(bit, pin_addr + MXS_SET); +} + +/* MXS has one interrupt *per* gpio port */ +static void mxs_gpio_irq_handler(struct irq_desc *desc) +{ + u32 irq_stat; + struct mxs_gpio_port *port = irq_desc_get_handler_data(desc); + + desc->irq_data.chip->irq_ack(&desc->irq_data); + + irq_stat = readl(port->base + PINCTRL_IRQSTAT(port)) & + readl(port->base + PINCTRL_IRQEN(port)); + + while (irq_stat != 0) { + int irqoffset = fls(irq_stat) - 1; + if (port->both_edges & (1 << irqoffset)) + mxs_flip_edge(port, irqoffset); + + generic_handle_irq(irq_find_mapping(port->domain, irqoffset)); + irq_stat &= ~(1 << irqoffset); + } +} + +/* + * Set interrupt number "irq" in the GPIO as a wake-up source. + * While system is running, all registered GPIO interrupts need to have + * wake-up enabled. When system is suspended, only selected GPIO interrupts + * need to have wake-up enabled. + * @param irq interrupt source number + * @param enable enable as wake-up if equal to non-zero + * @return This function returns 0 on success. + */ +static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mxs_gpio_port *port = gc->private; + + if (enable) + enable_irq_wake(port->irq); + else + disable_irq_wake(port->irq); + + return 0; +} + +static int mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + int rv; + + gc = devm_irq_alloc_generic_chip(port->dev, "gpio-mxs", 2, irq_base, + port->base, handle_level_irq); + if (!gc) + return -ENOMEM; + + gc->private = port; + + ct = &gc->chip_types[0]; + ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; + ct->chip.irq_ack = irq_gc_ack_set_bit; + ct->chip.irq_mask = irq_gc_mask_disable_reg; + ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.irq_set_type = mxs_gpio_set_irq_type; + ct->chip.irq_set_wake = mxs_gpio_set_wake_irq; + ct->chip.flags = IRQCHIP_SET_TYPE_MASKED; + ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR; + ct->regs.enable = PINCTRL_PIN2IRQ(port) + MXS_SET; + ct->regs.disable = PINCTRL_PIN2IRQ(port) + MXS_CLR; + + ct = &gc->chip_types[1]; + ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + ct->chip.irq_ack = irq_gc_ack_set_bit; + ct->chip.irq_mask = irq_gc_mask_disable_reg; + ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.irq_set_type = mxs_gpio_set_irq_type; + ct->chip.irq_set_wake = mxs_gpio_set_wake_irq; + ct->chip.flags = IRQCHIP_SET_TYPE_MASKED; + ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR; + ct->regs.enable = PINCTRL_IRQEN(port) + MXS_SET; + ct->regs.disable = PINCTRL_IRQEN(port) + MXS_CLR; + ct->handler = handle_level_irq; + + rv = devm_irq_setup_generic_chip(port->dev, gc, IRQ_MSK(32), + IRQ_GC_INIT_NESTED_LOCK, + IRQ_NOREQUEST, 0); + + return rv; +} + +static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct mxs_gpio_port *port = gpiochip_get_data(gc); + + return irq_find_mapping(port->domain, offset); +} + +static int mxs_gpio_get_direction(struct gpio_chip *gc, unsigned offset) +{ + struct mxs_gpio_port *port = gpiochip_get_data(gc); + u32 mask = 1 << offset; + u32 dir; + + dir = readl(port->base + PINCTRL_DOE(port)); + return !(dir & mask); +} + +static const struct platform_device_id mxs_gpio_ids[] = { + { + .name = "imx23-gpio", + .driver_data = IMX23_GPIO, + }, { + .name = "imx28-gpio", + .driver_data = IMX28_GPIO, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, mxs_gpio_ids); + +static const struct of_device_id mxs_gpio_dt_ids[] = { + { .compatible = "fsl,imx23-gpio", .data = (void *) IMX23_GPIO, }, + { .compatible = "fsl,imx28-gpio", .data = (void *) IMX28_GPIO, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_gpio_dt_ids); + +static int mxs_gpio_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *parent; + static void __iomem *base; + struct mxs_gpio_port *port; + int irq_base; + int err; + + port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + port->id = of_alias_get_id(np, "gpio"); + if (port->id < 0) + return port->id; + port->devid = (enum mxs_gpio_id)of_device_get_match_data(&pdev->dev); + port->dev = &pdev->dev; + port->irq = platform_get_irq(pdev, 0); + if (port->irq < 0) + return port->irq; + + /* + * map memory region only once, as all the gpio ports + * share the same one + */ + if (!base) { + parent = of_get_parent(np); + base = of_iomap(parent, 0); + of_node_put(parent); + if (!base) + return -EADDRNOTAVAIL; + } + port->base = base; + + /* initially disable the interrupts */ + writel(0, port->base + PINCTRL_PIN2IRQ(port)); + writel(0, port->base + PINCTRL_IRQEN(port)); + + /* clear address has to be used to clear IRQSTAT bits */ + writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR); + + irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id()); + if (irq_base < 0) { + err = irq_base; + goto out_iounmap; + } + + port->domain = irq_domain_add_legacy(np, 32, irq_base, 0, + &irq_domain_simple_ops, NULL); + if (!port->domain) { + err = -ENODEV; + goto out_iounmap; + } + + /* gpio-mxs can be a generic irq chip */ + err = mxs_gpio_init_gc(port, irq_base); + if (err < 0) + goto out_irqdomain_remove; + + /* setup one handler for each entry */ + irq_set_chained_handler_and_data(port->irq, mxs_gpio_irq_handler, + port); + + err = bgpio_init(&port->gc, &pdev->dev, 4, + port->base + PINCTRL_DIN(port), + port->base + PINCTRL_DOUT(port) + MXS_SET, + port->base + PINCTRL_DOUT(port) + MXS_CLR, + port->base + PINCTRL_DOE(port), NULL, 0); + if (err) + goto out_irqdomain_remove; + + port->gc.to_irq = mxs_gpio_to_irq; + port->gc.get_direction = mxs_gpio_get_direction; + port->gc.base = port->id * 32; + + err = gpiochip_add_data(&port->gc, port); + if (err) + goto out_irqdomain_remove; + + return 0; + +out_irqdomain_remove: + irq_domain_remove(port->domain); +out_iounmap: + iounmap(port->base); + return err; +} + +static struct platform_driver mxs_gpio_driver = { + .driver = { + .name = "gpio-mxs", + .of_match_table = mxs_gpio_dt_ids, + .suppress_bind_attrs = true, + }, + .probe = mxs_gpio_probe, + .id_table = mxs_gpio_ids, +}; + +static int __init mxs_gpio_init(void) +{ + return platform_driver_register(&mxs_gpio_driver); +} +postcore_initcall(mxs_gpio_init); + +MODULE_AUTHOR("Freescale Semiconductor, " + "Daniel Mack <danielncaiaq.de>, " + "Juergen Beisert <kernel@pengutronix.de>"); +MODULE_DESCRIPTION("Freescale MXS GPIO"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-octeon.c b/drivers/gpio/gpio-octeon.c new file mode 100644 index 000000000..1b19c88ea --- /dev/null +++ b/drivers/gpio/gpio-octeon.c @@ -0,0 +1,139 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011, 2012 Cavium Inc. + */ + +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/gpio/driver.h> +#include <linux/io.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-gpio-defs.h> + +#define RX_DAT 0x80 +#define TX_SET 0x88 +#define TX_CLEAR 0x90 +/* + * The address offset of the GPIO configuration register for a given + * line. + */ +static unsigned int bit_cfg_reg(unsigned int offset) +{ + /* + * The register stride is 8, with a discontinuity after the + * first 16. + */ + if (offset < 16) + return 8 * offset; + else + return 8 * (offset - 16) + 0x100; +} + +struct octeon_gpio { + struct gpio_chip chip; + u64 register_base; +}; + +static int octeon_gpio_dir_in(struct gpio_chip *chip, unsigned offset) +{ + struct octeon_gpio *gpio = gpiochip_get_data(chip); + + cvmx_write_csr(gpio->register_base + bit_cfg_reg(offset), 0); + return 0; +} + +static void octeon_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct octeon_gpio *gpio = gpiochip_get_data(chip); + u64 mask = 1ull << offset; + u64 reg = gpio->register_base + (value ? TX_SET : TX_CLEAR); + cvmx_write_csr(reg, mask); +} + +static int octeon_gpio_dir_out(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct octeon_gpio *gpio = gpiochip_get_data(chip); + union cvmx_gpio_bit_cfgx cfgx; + + octeon_gpio_set(chip, offset, value); + + cfgx.u64 = 0; + cfgx.s.tx_oe = 1; + + cvmx_write_csr(gpio->register_base + bit_cfg_reg(offset), cfgx.u64); + return 0; +} + +static int octeon_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct octeon_gpio *gpio = gpiochip_get_data(chip); + u64 read_bits = cvmx_read_csr(gpio->register_base + RX_DAT); + + return ((1ull << offset) & read_bits) != 0; +} + +static int octeon_gpio_probe(struct platform_device *pdev) +{ + struct octeon_gpio *gpio; + struct gpio_chip *chip; + struct resource *res_mem; + void __iomem *reg_base; + int err = 0; + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + chip = &gpio->chip; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg_base = devm_ioremap_resource(&pdev->dev, res_mem); + if (IS_ERR(reg_base)) + return PTR_ERR(reg_base); + + gpio->register_base = (u64)reg_base; + pdev->dev.platform_data = chip; + chip->label = "octeon-gpio"; + chip->parent = &pdev->dev; + chip->owner = THIS_MODULE; + chip->base = 0; + chip->can_sleep = false; + chip->ngpio = 20; + chip->direction_input = octeon_gpio_dir_in; + chip->get = octeon_gpio_get; + chip->direction_output = octeon_gpio_dir_out; + chip->set = octeon_gpio_set; + err = devm_gpiochip_add_data(&pdev->dev, chip, gpio); + if (err) + return err; + + dev_info(&pdev->dev, "OCTEON GPIO driver probed.\n"); + return 0; +} + +static const struct of_device_id octeon_gpio_match[] = { + { + .compatible = "cavium,octeon-3860-gpio", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, octeon_gpio_match); + +static struct platform_driver octeon_gpio_driver = { + .driver = { + .name = "octeon_gpio", + .of_match_table = octeon_gpio_match, + }, + .probe = octeon_gpio_probe, +}; + +module_platform_driver(octeon_gpio_driver); + +MODULE_DESCRIPTION("Cavium Inc. OCTEON GPIO Driver"); +MODULE_AUTHOR("David Daney"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c new file mode 100644 index 000000000..feabac407 --- /dev/null +++ b/drivers/gpio/gpio-omap.c @@ -0,0 +1,1772 @@ +/* + * Support functions for OMAP GPIO + * + * Copyright (C) 2003-2005 Nokia Corporation + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/syscore_ops.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/pm_runtime.h> +#include <linux/pm.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/gpio/driver.h> +#include <linux/bitops.h> +#include <linux/platform_data/gpio-omap.h> + +#define OFF_MODE 1 +#define OMAP4_GPIO_DEBOUNCINGTIME_MASK 0xFF + +static LIST_HEAD(omap_gpio_list); + +struct gpio_regs { + u32 irqenable1; + u32 irqenable2; + u32 wake_en; + u32 ctrl; + u32 oe; + u32 leveldetect0; + u32 leveldetect1; + u32 risingdetect; + u32 fallingdetect; + u32 dataout; + u32 debounce; + u32 debounce_en; +}; + +struct gpio_bank { + struct list_head node; + void __iomem *base; + int irq; + u32 non_wakeup_gpios; + u32 enabled_non_wakeup_gpios; + struct gpio_regs context; + u32 saved_datain; + u32 level_mask; + u32 toggle_mask; + raw_spinlock_t lock; + raw_spinlock_t wa_lock; + struct gpio_chip chip; + struct clk *dbck; + u32 mod_usage; + u32 irq_usage; + u32 dbck_enable_mask; + bool dbck_enabled; + bool is_mpuio; + bool dbck_flag; + bool loses_context; + bool context_valid; + int stride; + u32 width; + int context_loss_count; + int power_mode; + bool workaround_enabled; + + void (*set_dataout)(struct gpio_bank *bank, unsigned gpio, int enable); + void (*set_dataout_multiple)(struct gpio_bank *bank, + unsigned long *mask, unsigned long *bits); + int (*get_context_loss_count)(struct device *dev); + + struct omap_gpio_reg_offs *regs; +}; + +#define GPIO_MOD_CTRL_BIT BIT(0) + +#define BANK_USED(bank) (bank->mod_usage || bank->irq_usage) +#define LINE_USED(line, offset) (line & (BIT(offset))) + +static void omap_gpio_unmask_irq(struct irq_data *d); + +static inline struct gpio_bank *omap_irq_data_get_bank(struct irq_data *d) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(d); + return gpiochip_get_data(chip); +} + +static void omap_set_gpio_direction(struct gpio_bank *bank, int gpio, + int is_input) +{ + void __iomem *reg = bank->base; + u32 l; + + reg += bank->regs->direction; + l = readl_relaxed(reg); + if (is_input) + l |= BIT(gpio); + else + l &= ~(BIT(gpio)); + writel_relaxed(l, reg); + bank->context.oe = l; +} + + +/* set data out value using dedicate set/clear register */ +static void omap_set_gpio_dataout_reg(struct gpio_bank *bank, unsigned offset, + int enable) +{ + void __iomem *reg = bank->base; + u32 l = BIT(offset); + + if (enable) { + reg += bank->regs->set_dataout; + bank->context.dataout |= l; + } else { + reg += bank->regs->clr_dataout; + bank->context.dataout &= ~l; + } + + writel_relaxed(l, reg); +} + +/* set data out value using mask register */ +static void omap_set_gpio_dataout_mask(struct gpio_bank *bank, unsigned offset, + int enable) +{ + void __iomem *reg = bank->base + bank->regs->dataout; + u32 gpio_bit = BIT(offset); + u32 l; + + l = readl_relaxed(reg); + if (enable) + l |= gpio_bit; + else + l &= ~gpio_bit; + writel_relaxed(l, reg); + bank->context.dataout = l; +} + +static int omap_get_gpio_datain(struct gpio_bank *bank, int offset) +{ + void __iomem *reg = bank->base + bank->regs->datain; + + return (readl_relaxed(reg) & (BIT(offset))) != 0; +} + +static int omap_get_gpio_dataout(struct gpio_bank *bank, int offset) +{ + void __iomem *reg = bank->base + bank->regs->dataout; + + return (readl_relaxed(reg) & (BIT(offset))) != 0; +} + +/* set multiple data out values using dedicate set/clear register */ +static void omap_set_gpio_dataout_reg_multiple(struct gpio_bank *bank, + unsigned long *mask, + unsigned long *bits) +{ + void __iomem *reg = bank->base; + u32 l; + + l = *bits & *mask; + writel_relaxed(l, reg + bank->regs->set_dataout); + bank->context.dataout |= l; + + l = ~*bits & *mask; + writel_relaxed(l, reg + bank->regs->clr_dataout); + bank->context.dataout &= ~l; +} + +/* set multiple data out values using mask register */ +static void omap_set_gpio_dataout_mask_multiple(struct gpio_bank *bank, + unsigned long *mask, + unsigned long *bits) +{ + void __iomem *reg = bank->base + bank->regs->dataout; + u32 l = (readl_relaxed(reg) & ~*mask) | (*bits & *mask); + + writel_relaxed(l, reg); + bank->context.dataout = l; +} + +static unsigned long omap_get_gpio_datain_multiple(struct gpio_bank *bank, + unsigned long *mask) +{ + void __iomem *reg = bank->base + bank->regs->datain; + + return readl_relaxed(reg) & *mask; +} + +static unsigned long omap_get_gpio_dataout_multiple(struct gpio_bank *bank, + unsigned long *mask) +{ + void __iomem *reg = bank->base + bank->regs->dataout; + + return readl_relaxed(reg) & *mask; +} + +static inline void omap_gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set) +{ + int l = readl_relaxed(base + reg); + + if (set) + l |= mask; + else + l &= ~mask; + + writel_relaxed(l, base + reg); +} + +static inline void omap_gpio_dbck_enable(struct gpio_bank *bank) +{ + if (bank->dbck_enable_mask && !bank->dbck_enabled) { + clk_enable(bank->dbck); + bank->dbck_enabled = true; + + writel_relaxed(bank->dbck_enable_mask, + bank->base + bank->regs->debounce_en); + } +} + +static inline void omap_gpio_dbck_disable(struct gpio_bank *bank) +{ + if (bank->dbck_enable_mask && bank->dbck_enabled) { + /* + * Disable debounce before cutting it's clock. If debounce is + * enabled but the clock is not, GPIO module seems to be unable + * to detect events and generate interrupts at least on OMAP3. + */ + writel_relaxed(0, bank->base + bank->regs->debounce_en); + + clk_disable(bank->dbck); + bank->dbck_enabled = false; + } +} + +/** + * omap2_set_gpio_debounce - low level gpio debounce time + * @bank: the gpio bank we're acting upon + * @offset: the gpio number on this @bank + * @debounce: debounce time to use + * + * OMAP's debounce time is in 31us steps + * <debounce time> = (GPIO_DEBOUNCINGTIME[7:0].DEBOUNCETIME + 1) x 31 + * so we need to convert and round up to the closest unit. + * + * Return: 0 on success, negative error otherwise. + */ +static int omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset, + unsigned debounce) +{ + void __iomem *reg; + u32 val; + u32 l; + bool enable = !!debounce; + + if (!bank->dbck_flag) + return -ENOTSUPP; + + if (enable) { + debounce = DIV_ROUND_UP(debounce, 31) - 1; + if ((debounce & OMAP4_GPIO_DEBOUNCINGTIME_MASK) != debounce) + return -EINVAL; + } + + l = BIT(offset); + + clk_enable(bank->dbck); + reg = bank->base + bank->regs->debounce; + writel_relaxed(debounce, reg); + + reg = bank->base + bank->regs->debounce_en; + val = readl_relaxed(reg); + + if (enable) + val |= l; + else + val &= ~l; + bank->dbck_enable_mask = val; + + writel_relaxed(val, reg); + clk_disable(bank->dbck); + /* + * Enable debounce clock per module. + * This call is mandatory because in omap_gpio_request() when + * *_runtime_get_sync() is called, _gpio_dbck_enable() within + * runtime callbck fails to turn on dbck because dbck_enable_mask + * used within _gpio_dbck_enable() is still not initialized at + * that point. Therefore we have to enable dbck here. + */ + omap_gpio_dbck_enable(bank); + if (bank->dbck_enable_mask) { + bank->context.debounce = debounce; + bank->context.debounce_en = val; + } + + return 0; +} + +/** + * omap_clear_gpio_debounce - clear debounce settings for a gpio + * @bank: the gpio bank we're acting upon + * @offset: the gpio number on this @bank + * + * If a gpio is using debounce, then clear the debounce enable bit and if + * this is the only gpio in this bank using debounce, then clear the debounce + * time too. The debounce clock will also be disabled when calling this function + * if this is the only gpio in the bank using debounce. + */ +static void omap_clear_gpio_debounce(struct gpio_bank *bank, unsigned offset) +{ + u32 gpio_bit = BIT(offset); + + if (!bank->dbck_flag) + return; + + if (!(bank->dbck_enable_mask & gpio_bit)) + return; + + bank->dbck_enable_mask &= ~gpio_bit; + bank->context.debounce_en &= ~gpio_bit; + writel_relaxed(bank->context.debounce_en, + bank->base + bank->regs->debounce_en); + + if (!bank->dbck_enable_mask) { + bank->context.debounce = 0; + writel_relaxed(bank->context.debounce, bank->base + + bank->regs->debounce); + clk_disable(bank->dbck); + bank->dbck_enabled = false; + } +} + +/* + * Off mode wake-up capable GPIOs in bank(s) that are in the wakeup domain. + * See TRM section for GPIO for "Wake-Up Generation" for the list of GPIOs + * in wakeup domain. If bank->non_wakeup_gpios is not configured, assume none + * are capable waking up the system from off mode. + */ +static bool omap_gpio_is_off_wakeup_capable(struct gpio_bank *bank, u32 gpio_mask) +{ + u32 no_wake = bank->non_wakeup_gpios; + + if (no_wake) + return !!(~no_wake & gpio_mask); + + return false; +} + +static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio, + unsigned trigger) +{ + void __iomem *base = bank->base; + u32 gpio_bit = BIT(gpio); + + omap_gpio_rmw(base, bank->regs->leveldetect0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + omap_gpio_rmw(base, bank->regs->leveldetect1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + omap_gpio_rmw(base, bank->regs->risingdetect, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + omap_gpio_rmw(base, bank->regs->fallingdetect, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); + + bank->context.leveldetect0 = + readl_relaxed(bank->base + bank->regs->leveldetect0); + bank->context.leveldetect1 = + readl_relaxed(bank->base + bank->regs->leveldetect1); + bank->context.risingdetect = + readl_relaxed(bank->base + bank->regs->risingdetect); + bank->context.fallingdetect = + readl_relaxed(bank->base + bank->regs->fallingdetect); + + if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { + omap_gpio_rmw(base, bank->regs->wkup_en, gpio_bit, trigger != 0); + bank->context.wake_en = + readl_relaxed(bank->base + bank->regs->wkup_en); + } + + /* This part needs to be executed always for OMAP{34xx, 44xx} */ + if (!bank->regs->irqctrl && !omap_gpio_is_off_wakeup_capable(bank, gpio)) { + /* + * Log the edge gpio and manually trigger the IRQ + * after resume if the input level changes + * to avoid irq lost during PER RET/OFF mode + * Applies for omap2 non-wakeup gpio and all omap3 gpios + */ + if (trigger & IRQ_TYPE_EDGE_BOTH) + bank->enabled_non_wakeup_gpios |= gpio_bit; + else + bank->enabled_non_wakeup_gpios &= ~gpio_bit; + } + + bank->level_mask = + readl_relaxed(bank->base + bank->regs->leveldetect0) | + readl_relaxed(bank->base + bank->regs->leveldetect1); +} + +#ifdef CONFIG_ARCH_OMAP1 +/* + * This only applies to chips that can't do both rising and falling edge + * detection at once. For all other chips, this function is a noop. + */ +static void omap_toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg = bank->base; + u32 l = 0; + + if (!bank->regs->irqctrl) + return; + + reg += bank->regs->irqctrl; + + l = readl_relaxed(reg); + if ((l >> gpio) & 1) + l &= ~(BIT(gpio)); + else + l |= BIT(gpio); + + writel_relaxed(l, reg); +} +#else +static void omap_toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {} +#endif + +static int omap_set_gpio_triggering(struct gpio_bank *bank, int gpio, + unsigned trigger) +{ + void __iomem *reg = bank->base; + void __iomem *base = bank->base; + u32 l = 0; + + if (bank->regs->leveldetect0 && bank->regs->wkup_en) { + omap_set_gpio_trigger(bank, gpio, trigger); + } else if (bank->regs->irqctrl) { + reg += bank->regs->irqctrl; + + l = readl_relaxed(reg); + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= BIT(gpio); + if (trigger & IRQ_TYPE_EDGE_RISING) + l |= BIT(gpio); + else if (trigger & IRQ_TYPE_EDGE_FALLING) + l &= ~(BIT(gpio)); + else + return -EINVAL; + + writel_relaxed(l, reg); + } else if (bank->regs->edgectrl1) { + if (gpio & 0x08) + reg += bank->regs->edgectrl2; + else + reg += bank->regs->edgectrl1; + + gpio &= 0x07; + l = readl_relaxed(reg); + l &= ~(3 << (gpio << 1)); + if (trigger & IRQ_TYPE_EDGE_RISING) + l |= 2 << (gpio << 1); + if (trigger & IRQ_TYPE_EDGE_FALLING) + l |= BIT(gpio << 1); + + /* Enable wake-up during idle for dynamic tick */ + omap_gpio_rmw(base, bank->regs->wkup_en, BIT(gpio), trigger); + bank->context.wake_en = + readl_relaxed(bank->base + bank->regs->wkup_en); + writel_relaxed(l, reg); + } + return 0; +} + +static void omap_enable_gpio_module(struct gpio_bank *bank, unsigned offset) +{ + if (bank->regs->pinctrl) { + void __iomem *reg = bank->base + bank->regs->pinctrl; + + /* Claim the pin for MPU */ + writel_relaxed(readl_relaxed(reg) | (BIT(offset)), reg); + } + + if (bank->regs->ctrl && !BANK_USED(bank)) { + void __iomem *reg = bank->base + bank->regs->ctrl; + u32 ctrl; + + ctrl = readl_relaxed(reg); + /* Module is enabled, clocks are not gated */ + ctrl &= ~GPIO_MOD_CTRL_BIT; + writel_relaxed(ctrl, reg); + bank->context.ctrl = ctrl; + } +} + +static void omap_disable_gpio_module(struct gpio_bank *bank, unsigned offset) +{ + void __iomem *base = bank->base; + + if (bank->regs->wkup_en && + !LINE_USED(bank->mod_usage, offset) && + !LINE_USED(bank->irq_usage, offset)) { + /* Disable wake-up during idle for dynamic tick */ + omap_gpio_rmw(base, bank->regs->wkup_en, BIT(offset), 0); + bank->context.wake_en = + readl_relaxed(bank->base + bank->regs->wkup_en); + } + + if (bank->regs->ctrl && !BANK_USED(bank)) { + void __iomem *reg = bank->base + bank->regs->ctrl; + u32 ctrl; + + ctrl = readl_relaxed(reg); + /* Module is disabled, clocks are gated */ + ctrl |= GPIO_MOD_CTRL_BIT; + writel_relaxed(ctrl, reg); + bank->context.ctrl = ctrl; + } +} + +static int omap_gpio_is_input(struct gpio_bank *bank, unsigned offset) +{ + void __iomem *reg = bank->base + bank->regs->direction; + + return readl_relaxed(reg) & BIT(offset); +} + +static void omap_gpio_init_irq(struct gpio_bank *bank, unsigned offset) +{ + if (!LINE_USED(bank->mod_usage, offset)) { + omap_enable_gpio_module(bank, offset); + omap_set_gpio_direction(bank, offset, 1); + } + bank->irq_usage |= BIT(offset); +} + +static int omap_gpio_irq_type(struct irq_data *d, unsigned type) +{ + struct gpio_bank *bank = omap_irq_data_get_bank(d); + int retval; + unsigned long flags; + unsigned offset = d->hwirq; + + if (type & ~IRQ_TYPE_SENSE_MASK) + return -EINVAL; + + if (!bank->regs->leveldetect0 && + (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) + return -EINVAL; + + raw_spin_lock_irqsave(&bank->lock, flags); + retval = omap_set_gpio_triggering(bank, offset, type); + if (retval) { + raw_spin_unlock_irqrestore(&bank->lock, flags); + goto error; + } + omap_gpio_init_irq(bank, offset); + if (!omap_gpio_is_input(bank, offset)) { + raw_spin_unlock_irqrestore(&bank->lock, flags); + retval = -EINVAL; + goto error; + } + raw_spin_unlock_irqrestore(&bank->lock, flags); + + if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) + irq_set_handler_locked(d, handle_level_irq); + else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + /* + * Edge IRQs are already cleared/acked in irq_handler and + * not need to be masked, as result handle_edge_irq() + * logic is excessed here and may cause lose of interrupts. + * So just use handle_simple_irq. + */ + irq_set_handler_locked(d, handle_simple_irq); + + return 0; + +error: + return retval; +} + +static void omap_clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) +{ + void __iomem *reg = bank->base; + + reg += bank->regs->irqstatus; + writel_relaxed(gpio_mask, reg); + + /* Workaround for clearing DSP GPIO interrupts to allow retention */ + if (bank->regs->irqstatus2) { + reg = bank->base + bank->regs->irqstatus2; + writel_relaxed(gpio_mask, reg); + } + + /* Flush posted write for the irq status to avoid spurious interrupts */ + readl_relaxed(reg); +} + +static inline void omap_clear_gpio_irqstatus(struct gpio_bank *bank, + unsigned offset) +{ + omap_clear_gpio_irqbank(bank, BIT(offset)); +} + +static u32 omap_get_gpio_irqbank_mask(struct gpio_bank *bank) +{ + void __iomem *reg = bank->base; + u32 l; + u32 mask = (BIT(bank->width)) - 1; + + reg += bank->regs->irqenable; + l = readl_relaxed(reg); + if (bank->regs->irqenable_inv) + l = ~l; + l &= mask; + return l; +} + +static void omap_enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) +{ + void __iomem *reg = bank->base; + u32 l; + + if (bank->regs->set_irqenable) { + reg += bank->regs->set_irqenable; + l = gpio_mask; + bank->context.irqenable1 |= gpio_mask; + } else { + reg += bank->regs->irqenable; + l = readl_relaxed(reg); + if (bank->regs->irqenable_inv) + l &= ~gpio_mask; + else + l |= gpio_mask; + bank->context.irqenable1 = l; + } + + writel_relaxed(l, reg); +} + +static void omap_disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) +{ + void __iomem *reg = bank->base; + u32 l; + + if (bank->regs->clr_irqenable) { + reg += bank->regs->clr_irqenable; + l = gpio_mask; + bank->context.irqenable1 &= ~gpio_mask; + } else { + reg += bank->regs->irqenable; + l = readl_relaxed(reg); + if (bank->regs->irqenable_inv) + l |= gpio_mask; + else + l &= ~gpio_mask; + bank->context.irqenable1 = l; + } + + writel_relaxed(l, reg); +} + +static inline void omap_set_gpio_irqenable(struct gpio_bank *bank, + unsigned offset, int enable) +{ + if (enable) + omap_enable_gpio_irqbank(bank, BIT(offset)); + else + omap_disable_gpio_irqbank(bank, BIT(offset)); +} + +/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ +static int omap_gpio_wake_enable(struct irq_data *d, unsigned int enable) +{ + struct gpio_bank *bank = omap_irq_data_get_bank(d); + + return irq_set_irq_wake(bank->irq, enable); +} + +static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank = gpiochip_get_data(chip); + unsigned long flags; + + /* + * If this is the first gpio_request for the bank, + * enable the bank module. + */ + if (!BANK_USED(bank)) + pm_runtime_get_sync(chip->parent); + + raw_spin_lock_irqsave(&bank->lock, flags); + omap_enable_gpio_module(bank, offset); + bank->mod_usage |= BIT(offset); + raw_spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + +static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank = gpiochip_get_data(chip); + unsigned long flags; + + raw_spin_lock_irqsave(&bank->lock, flags); + bank->mod_usage &= ~(BIT(offset)); + if (!LINE_USED(bank->irq_usage, offset)) { + omap_set_gpio_direction(bank, offset, 1); + omap_clear_gpio_debounce(bank, offset); + } + omap_disable_gpio_module(bank, offset); + raw_spin_unlock_irqrestore(&bank->lock, flags); + + /* + * If this is the last gpio to be freed in the bank, + * disable the bank module. + */ + if (!BANK_USED(bank)) + pm_runtime_put(chip->parent); +} + +/* + * We need to unmask the GPIO bank interrupt as soon as possible to + * avoid missing GPIO interrupts for other lines in the bank. + * Then we need to mask-read-clear-unmask the triggered GPIO lines + * in the bank to avoid missing nested interrupts for a GPIO line. + * If we wait to unmask individual GPIO lines in the bank after the + * line's interrupt handler has been run, we may miss some nested + * interrupts. + */ +static irqreturn_t omap_gpio_irq_handler(int irq, void *gpiobank) +{ + void __iomem *isr_reg = NULL; + u32 enabled, isr, level_mask; + unsigned int bit; + struct gpio_bank *bank = gpiobank; + unsigned long wa_lock_flags; + unsigned long lock_flags; + + isr_reg = bank->base + bank->regs->irqstatus; + if (WARN_ON(!isr_reg)) + goto exit; + + pm_runtime_get_sync(bank->chip.parent); + + while (1) { + raw_spin_lock_irqsave(&bank->lock, lock_flags); + + enabled = omap_get_gpio_irqbank_mask(bank); + isr = readl_relaxed(isr_reg) & enabled; + + if (bank->level_mask) + level_mask = bank->level_mask & enabled; + else + level_mask = 0; + + /* clear edge sensitive interrupts before handler(s) are + called so that we don't miss any interrupt occurred while + executing them */ + if (isr & ~level_mask) + omap_clear_gpio_irqbank(bank, isr & ~level_mask); + + raw_spin_unlock_irqrestore(&bank->lock, lock_flags); + + if (!isr) + break; + + while (isr) { + bit = __ffs(isr); + isr &= ~(BIT(bit)); + + raw_spin_lock_irqsave(&bank->lock, lock_flags); + /* + * Some chips can't respond to both rising and falling + * at the same time. If this irq was requested with + * both flags, we need to flip the ICR data for the IRQ + * to respond to the IRQ for the opposite direction. + * This will be indicated in the bank toggle_mask. + */ + if (bank->toggle_mask & (BIT(bit))) + omap_toggle_gpio_edge_triggering(bank, bit); + + raw_spin_unlock_irqrestore(&bank->lock, lock_flags); + + raw_spin_lock_irqsave(&bank->wa_lock, wa_lock_flags); + + generic_handle_irq(irq_find_mapping(bank->chip.irq.domain, + bit)); + + raw_spin_unlock_irqrestore(&bank->wa_lock, + wa_lock_flags); + } + } +exit: + pm_runtime_put(bank->chip.parent); + return IRQ_HANDLED; +} + +static unsigned int omap_gpio_irq_startup(struct irq_data *d) +{ + struct gpio_bank *bank = omap_irq_data_get_bank(d); + unsigned long flags; + unsigned offset = d->hwirq; + + raw_spin_lock_irqsave(&bank->lock, flags); + + if (!LINE_USED(bank->mod_usage, offset)) + omap_set_gpio_direction(bank, offset, 1); + else if (!omap_gpio_is_input(bank, offset)) + goto err; + omap_enable_gpio_module(bank, offset); + bank->irq_usage |= BIT(offset); + + raw_spin_unlock_irqrestore(&bank->lock, flags); + omap_gpio_unmask_irq(d); + + return 0; +err: + raw_spin_unlock_irqrestore(&bank->lock, flags); + return -EINVAL; +} + +static void omap_gpio_irq_shutdown(struct irq_data *d) +{ + struct gpio_bank *bank = omap_irq_data_get_bank(d); + unsigned long flags; + unsigned offset = d->hwirq; + + raw_spin_lock_irqsave(&bank->lock, flags); + bank->irq_usage &= ~(BIT(offset)); + omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE); + omap_clear_gpio_irqstatus(bank, offset); + omap_set_gpio_irqenable(bank, offset, 0); + if (!LINE_USED(bank->mod_usage, offset)) + omap_clear_gpio_debounce(bank, offset); + omap_disable_gpio_module(bank, offset); + raw_spin_unlock_irqrestore(&bank->lock, flags); +} + +static void omap_gpio_irq_bus_lock(struct irq_data *data) +{ + struct gpio_bank *bank = omap_irq_data_get_bank(data); + + if (!BANK_USED(bank)) + pm_runtime_get_sync(bank->chip.parent); +} + +static void gpio_irq_bus_sync_unlock(struct irq_data *data) +{ + struct gpio_bank *bank = omap_irq_data_get_bank(data); + + /* + * If this is the last IRQ to be freed in the bank, + * disable the bank module. + */ + if (!BANK_USED(bank)) + pm_runtime_put(bank->chip.parent); +} + +static void omap_gpio_ack_irq(struct irq_data *d) +{ + struct gpio_bank *bank = omap_irq_data_get_bank(d); + unsigned offset = d->hwirq; + + omap_clear_gpio_irqstatus(bank, offset); +} + +static void omap_gpio_mask_irq(struct irq_data *d) +{ + struct gpio_bank *bank = omap_irq_data_get_bank(d); + unsigned offset = d->hwirq; + unsigned long flags; + + raw_spin_lock_irqsave(&bank->lock, flags); + omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE); + omap_set_gpio_irqenable(bank, offset, 0); + raw_spin_unlock_irqrestore(&bank->lock, flags); +} + +static void omap_gpio_unmask_irq(struct irq_data *d) +{ + struct gpio_bank *bank = omap_irq_data_get_bank(d); + unsigned offset = d->hwirq; + u32 trigger = irqd_get_trigger_type(d); + unsigned long flags; + + raw_spin_lock_irqsave(&bank->lock, flags); + omap_set_gpio_irqenable(bank, offset, 1); + + /* + * For level-triggered GPIOs, clearing must be done after the source + * is cleared, thus after the handler has run. OMAP4 needs this done + * after enabing the interrupt to clear the wakeup status. + */ + if (bank->regs->leveldetect0 && bank->regs->wkup_en && + trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) + omap_clear_gpio_irqstatus(bank, offset); + + if (trigger) + omap_set_gpio_triggering(bank, offset, trigger); + + raw_spin_unlock_irqrestore(&bank->lock, flags); +} + +/*---------------------------------------------------------------------*/ + +static int omap_mpuio_suspend_noirq(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + void __iomem *mask_reg = bank->base + + OMAP_MPUIO_GPIO_MASKIT / bank->stride; + unsigned long flags; + + raw_spin_lock_irqsave(&bank->lock, flags); + writel_relaxed(0xffff & ~bank->context.wake_en, mask_reg); + raw_spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + +static int omap_mpuio_resume_noirq(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + void __iomem *mask_reg = bank->base + + OMAP_MPUIO_GPIO_MASKIT / bank->stride; + unsigned long flags; + + raw_spin_lock_irqsave(&bank->lock, flags); + writel_relaxed(bank->context.wake_en, mask_reg); + raw_spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + +static const struct dev_pm_ops omap_mpuio_dev_pm_ops = { + .suspend_noirq = omap_mpuio_suspend_noirq, + .resume_noirq = omap_mpuio_resume_noirq, +}; + +/* use platform_driver for this. */ +static struct platform_driver omap_mpuio_driver = { + .driver = { + .name = "mpuio", + .pm = &omap_mpuio_dev_pm_ops, + }, +}; + +static struct platform_device omap_mpuio_device = { + .name = "mpuio", + .id = -1, + .dev = { + .driver = &omap_mpuio_driver.driver, + } + /* could list the /proc/iomem resources */ +}; + +static inline void omap_mpuio_init(struct gpio_bank *bank) +{ + platform_set_drvdata(&omap_mpuio_device, bank); + + if (platform_driver_register(&omap_mpuio_driver) == 0) + (void) platform_device_register(&omap_mpuio_device); +} + +/*---------------------------------------------------------------------*/ + +static int omap_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank; + unsigned long flags; + void __iomem *reg; + int dir; + + bank = gpiochip_get_data(chip); + reg = bank->base + bank->regs->direction; + raw_spin_lock_irqsave(&bank->lock, flags); + dir = !!(readl_relaxed(reg) & BIT(offset)); + raw_spin_unlock_irqrestore(&bank->lock, flags); + return dir; +} + +static int omap_gpio_input(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = gpiochip_get_data(chip); + raw_spin_lock_irqsave(&bank->lock, flags); + omap_set_gpio_direction(bank, offset, 1); + raw_spin_unlock_irqrestore(&bank->lock, flags); + return 0; +} + +static int omap_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank; + + bank = gpiochip_get_data(chip); + + if (omap_gpio_is_input(bank, offset)) + return omap_get_gpio_datain(bank, offset); + else + return omap_get_gpio_dataout(bank, offset); +} + +static int omap_gpio_output(struct gpio_chip *chip, unsigned offset, int value) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = gpiochip_get_data(chip); + raw_spin_lock_irqsave(&bank->lock, flags); + bank->set_dataout(bank, offset, value); + omap_set_gpio_direction(bank, offset, 0); + raw_spin_unlock_irqrestore(&bank->lock, flags); + return 0; +} + +static int omap_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, + unsigned long *bits) +{ + struct gpio_bank *bank = gpiochip_get_data(chip); + void __iomem *reg = bank->base + bank->regs->direction; + unsigned long in = readl_relaxed(reg), l; + + *bits = 0; + + l = in & *mask; + if (l) + *bits |= omap_get_gpio_datain_multiple(bank, &l); + + l = ~in & *mask; + if (l) + *bits |= omap_get_gpio_dataout_multiple(bank, &l); + + return 0; +} + +static int omap_gpio_debounce(struct gpio_chip *chip, unsigned offset, + unsigned debounce) +{ + struct gpio_bank *bank; + unsigned long flags; + int ret; + + bank = gpiochip_get_data(chip); + + raw_spin_lock_irqsave(&bank->lock, flags); + ret = omap2_set_gpio_debounce(bank, offset, debounce); + raw_spin_unlock_irqrestore(&bank->lock, flags); + + if (ret) + dev_info(chip->parent, + "Could not set line %u debounce to %u microseconds (%d)", + offset, debounce, ret); + + return ret; +} + +static int omap_gpio_set_config(struct gpio_chip *chip, unsigned offset, + unsigned long config) +{ + u32 debounce; + + if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) + return -ENOTSUPP; + + debounce = pinconf_to_config_argument(config); + return omap_gpio_debounce(chip, offset, debounce); +} + +static void omap_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = gpiochip_get_data(chip); + raw_spin_lock_irqsave(&bank->lock, flags); + bank->set_dataout(bank, offset, value); + raw_spin_unlock_irqrestore(&bank->lock, flags); +} + +static void omap_gpio_set_multiple(struct gpio_chip *chip, unsigned long *mask, + unsigned long *bits) +{ + struct gpio_bank *bank = gpiochip_get_data(chip); + unsigned long flags; + + raw_spin_lock_irqsave(&bank->lock, flags); + bank->set_dataout_multiple(bank, mask, bits); + raw_spin_unlock_irqrestore(&bank->lock, flags); +} + +/*---------------------------------------------------------------------*/ + +static void omap_gpio_show_rev(struct gpio_bank *bank) +{ + static bool called; + u32 rev; + + if (called || bank->regs->revision == USHRT_MAX) + return; + + rev = readw_relaxed(bank->base + bank->regs->revision); + pr_info("OMAP GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); + + called = true; +} + +static void omap_gpio_mod_init(struct gpio_bank *bank) +{ + void __iomem *base = bank->base; + u32 l = 0xffffffff; + + if (bank->width == 16) + l = 0xffff; + + if (bank->is_mpuio) { + writel_relaxed(l, bank->base + bank->regs->irqenable); + return; + } + + omap_gpio_rmw(base, bank->regs->irqenable, l, + bank->regs->irqenable_inv); + omap_gpio_rmw(base, bank->regs->irqstatus, l, + !bank->regs->irqenable_inv); + if (bank->regs->debounce_en) + writel_relaxed(0, base + bank->regs->debounce_en); + + /* Save OE default value (0xffffffff) in the context */ + bank->context.oe = readl_relaxed(bank->base + bank->regs->direction); + /* Initialize interface clk ungated, module enabled */ + if (bank->regs->ctrl) + writel_relaxed(0, base + bank->regs->ctrl); +} + +static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc) +{ + struct gpio_irq_chip *irq; + static int gpio; + const char *label; + int irq_base = 0; + int ret; + + /* + * REVISIT eventually switch from OMAP-specific gpio structs + * over to the generic ones + */ + bank->chip.request = omap_gpio_request; + bank->chip.free = omap_gpio_free; + bank->chip.get_direction = omap_gpio_get_direction; + bank->chip.direction_input = omap_gpio_input; + bank->chip.get = omap_gpio_get; + bank->chip.get_multiple = omap_gpio_get_multiple; + bank->chip.direction_output = omap_gpio_output; + bank->chip.set_config = omap_gpio_set_config; + bank->chip.set = omap_gpio_set; + bank->chip.set_multiple = omap_gpio_set_multiple; + if (bank->is_mpuio) { + bank->chip.label = "mpuio"; + if (bank->regs->wkup_en) + bank->chip.parent = &omap_mpuio_device.dev; + bank->chip.base = OMAP_MPUIO(0); + } else { + label = devm_kasprintf(bank->chip.parent, GFP_KERNEL, "gpio-%d-%d", + gpio, gpio + bank->width - 1); + if (!label) + return -ENOMEM; + bank->chip.label = label; + bank->chip.base = gpio; + } + bank->chip.ngpio = bank->width; + +#ifdef CONFIG_ARCH_OMAP1 + /* + * REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop + * irq_alloc_descs() since a base IRQ offset will no longer be needed. + */ + irq_base = devm_irq_alloc_descs(bank->chip.parent, + -1, 0, bank->width, 0); + if (irq_base < 0) { + dev_err(bank->chip.parent, "Couldn't allocate IRQ numbers\n"); + return -ENODEV; + } +#endif + + /* MPUIO is a bit different, reading IRQ status clears it */ + if (bank->is_mpuio) { + irqc->irq_ack = dummy_irq_chip.irq_ack; + if (!bank->regs->wkup_en) + irqc->irq_set_wake = NULL; + } + + irq = &bank->chip.irq; + irq->chip = irqc; + irq->handler = handle_bad_irq; + irq->default_type = IRQ_TYPE_NONE; + irq->num_parents = 1; + irq->parents = &bank->irq; + irq->first = irq_base; + + ret = gpiochip_add_data(&bank->chip, bank); + if (ret) { + dev_err(bank->chip.parent, + "Could not register gpio chip %d\n", ret); + return ret; + } + + ret = devm_request_irq(bank->chip.parent, bank->irq, + omap_gpio_irq_handler, + 0, dev_name(bank->chip.parent), bank); + if (ret) + gpiochip_remove(&bank->chip); + + if (!bank->is_mpuio) + gpio += bank->width; + + return ret; +} + +static const struct of_device_id omap_gpio_match[]; + +static int omap_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + const struct of_device_id *match; + const struct omap_gpio_platform_data *pdata; + struct resource *res; + struct gpio_bank *bank; + struct irq_chip *irqc; + int ret; + + match = of_match_device(of_match_ptr(omap_gpio_match), dev); + + pdata = match ? match->data : dev_get_platdata(dev); + if (!pdata) + return -EINVAL; + + bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL); + if (!bank) + return -ENOMEM; + + irqc = devm_kzalloc(dev, sizeof(*irqc), GFP_KERNEL); + if (!irqc) + return -ENOMEM; + + irqc->irq_startup = omap_gpio_irq_startup, + irqc->irq_shutdown = omap_gpio_irq_shutdown, + irqc->irq_ack = omap_gpio_ack_irq, + irqc->irq_mask = omap_gpio_mask_irq, + irqc->irq_unmask = omap_gpio_unmask_irq, + irqc->irq_set_type = omap_gpio_irq_type, + irqc->irq_set_wake = omap_gpio_wake_enable, + irqc->irq_bus_lock = omap_gpio_irq_bus_lock, + irqc->irq_bus_sync_unlock = gpio_irq_bus_sync_unlock, + irqc->name = dev_name(&pdev->dev); + irqc->flags = IRQCHIP_MASK_ON_SUSPEND; + + bank->irq = platform_get_irq(pdev, 0); + if (bank->irq <= 0) { + if (!bank->irq) + bank->irq = -ENXIO; + if (bank->irq != -EPROBE_DEFER) + dev_err(dev, + "can't get irq resource ret=%d\n", bank->irq); + return bank->irq; + } + + bank->chip.parent = dev; + bank->chip.owner = THIS_MODULE; + bank->dbck_flag = pdata->dbck_flag; + bank->stride = pdata->bank_stride; + bank->width = pdata->bank_width; + bank->is_mpuio = pdata->is_mpuio; + bank->non_wakeup_gpios = pdata->non_wakeup_gpios; + bank->regs = pdata->regs; +#ifdef CONFIG_OF_GPIO + bank->chip.of_node = of_node_get(node); +#endif + if (node) { + if (!of_property_read_bool(node, "ti,gpio-always-on")) + bank->loses_context = true; + } else { + bank->loses_context = pdata->loses_context; + + if (bank->loses_context) + bank->get_context_loss_count = + pdata->get_context_loss_count; + } + + if (bank->regs->set_dataout && bank->regs->clr_dataout) { + bank->set_dataout = omap_set_gpio_dataout_reg; + bank->set_dataout_multiple = omap_set_gpio_dataout_reg_multiple; + } else { + bank->set_dataout = omap_set_gpio_dataout_mask; + bank->set_dataout_multiple = + omap_set_gpio_dataout_mask_multiple; + } + + raw_spin_lock_init(&bank->lock); + raw_spin_lock_init(&bank->wa_lock); + + /* Static mapping, never released */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + bank->base = devm_ioremap_resource(dev, res); + if (IS_ERR(bank->base)) { + return PTR_ERR(bank->base); + } + + if (bank->dbck_flag) { + bank->dbck = devm_clk_get(dev, "dbclk"); + if (IS_ERR(bank->dbck)) { + dev_err(dev, + "Could not get gpio dbck. Disable debounce\n"); + bank->dbck_flag = false; + } else { + clk_prepare(bank->dbck); + } + } + + platform_set_drvdata(pdev, bank); + + pm_runtime_enable(dev); + pm_runtime_irq_safe(dev); + pm_runtime_get_sync(dev); + + if (bank->is_mpuio) + omap_mpuio_init(bank); + + omap_gpio_mod_init(bank); + + ret = omap_gpio_chip_init(bank, irqc); + if (ret) { + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + if (bank->dbck_flag) + clk_unprepare(bank->dbck); + return ret; + } + + omap_gpio_show_rev(bank); + + pm_runtime_put(dev); + + list_add_tail(&bank->node, &omap_gpio_list); + + return 0; +} + +static int omap_gpio_remove(struct platform_device *pdev) +{ + struct gpio_bank *bank = platform_get_drvdata(pdev); + + list_del(&bank->node); + gpiochip_remove(&bank->chip); + pm_runtime_disable(&pdev->dev); + if (bank->dbck_flag) + clk_unprepare(bank->dbck); + + return 0; +} + +#ifdef CONFIG_ARCH_OMAP2PLUS + +#if defined(CONFIG_PM) +static void omap_gpio_restore_context(struct gpio_bank *bank); + +static int omap_gpio_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + u32 l1 = 0, l2 = 0; + unsigned long flags; + u32 wake_low, wake_hi; + + raw_spin_lock_irqsave(&bank->lock, flags); + + /* + * Only edges can generate a wakeup event to the PRCM. + * + * Therefore, ensure any wake-up capable GPIOs have + * edge-detection enabled before going idle to ensure a wakeup + * to the PRCM is generated on a GPIO transition. (c.f. 34xx + * NDA TRM 25.5.3.1) + * + * The normal values will be restored upon ->runtime_resume() + * by writing back the values saved in bank->context. + */ + wake_low = bank->context.leveldetect0 & bank->context.wake_en; + if (wake_low) + writel_relaxed(wake_low | bank->context.fallingdetect, + bank->base + bank->regs->fallingdetect); + wake_hi = bank->context.leveldetect1 & bank->context.wake_en; + if (wake_hi) + writel_relaxed(wake_hi | bank->context.risingdetect, + bank->base + bank->regs->risingdetect); + + if (!bank->enabled_non_wakeup_gpios) + goto update_gpio_context_count; + + if (bank->power_mode != OFF_MODE) { + bank->power_mode = 0; + goto update_gpio_context_count; + } + /* + * If going to OFF, remove triggering for all + * non-wakeup GPIOs. Otherwise spurious IRQs will be + * generated. See OMAP2420 Errata item 1.101. + */ + bank->saved_datain = readl_relaxed(bank->base + + bank->regs->datain); + l1 = bank->context.fallingdetect; + l2 = bank->context.risingdetect; + + l1 &= ~bank->enabled_non_wakeup_gpios; + l2 &= ~bank->enabled_non_wakeup_gpios; + + writel_relaxed(l1, bank->base + bank->regs->fallingdetect); + writel_relaxed(l2, bank->base + bank->regs->risingdetect); + + bank->workaround_enabled = true; + +update_gpio_context_count: + if (bank->get_context_loss_count) + bank->context_loss_count = + bank->get_context_loss_count(dev); + + omap_gpio_dbck_disable(bank); + raw_spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + +static void omap_gpio_init_context(struct gpio_bank *p); + +static int omap_gpio_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + u32 l = 0, gen, gen0, gen1; + unsigned long flags; + int c; + + raw_spin_lock_irqsave(&bank->lock, flags); + + /* + * On the first resume during the probe, the context has not + * been initialised and so initialise it now. Also initialise + * the context loss count. + */ + if (bank->loses_context && !bank->context_valid) { + omap_gpio_init_context(bank); + + if (bank->get_context_loss_count) + bank->context_loss_count = + bank->get_context_loss_count(dev); + } + + omap_gpio_dbck_enable(bank); + + /* + * In ->runtime_suspend(), level-triggered, wakeup-enabled + * GPIOs were set to edge trigger also in order to be able to + * generate a PRCM wakeup. Here we restore the + * pre-runtime_suspend() values for edge triggering. + */ + writel_relaxed(bank->context.fallingdetect, + bank->base + bank->regs->fallingdetect); + writel_relaxed(bank->context.risingdetect, + bank->base + bank->regs->risingdetect); + + if (bank->loses_context) { + if (!bank->get_context_loss_count) { + omap_gpio_restore_context(bank); + } else { + c = bank->get_context_loss_count(dev); + if (c != bank->context_loss_count) { + omap_gpio_restore_context(bank); + } else { + raw_spin_unlock_irqrestore(&bank->lock, flags); + return 0; + } + } + } + + if (!bank->workaround_enabled) { + raw_spin_unlock_irqrestore(&bank->lock, flags); + return 0; + } + + l = readl_relaxed(bank->base + bank->regs->datain); + + /* + * Check if any of the non-wakeup interrupt GPIOs have changed + * state. If so, generate an IRQ by software. This is + * horribly racy, but it's the best we can do to work around + * this silicon bug. + */ + l ^= bank->saved_datain; + l &= bank->enabled_non_wakeup_gpios; + + /* + * No need to generate IRQs for the rising edge for gpio IRQs + * configured with falling edge only; and vice versa. + */ + gen0 = l & bank->context.fallingdetect; + gen0 &= bank->saved_datain; + + gen1 = l & bank->context.risingdetect; + gen1 &= ~(bank->saved_datain); + + /* FIXME: Consider GPIO IRQs with level detections properly! */ + gen = l & (~(bank->context.fallingdetect) & + ~(bank->context.risingdetect)); + /* Consider all GPIO IRQs needed to be updated */ + gen |= gen0 | gen1; + + if (gen) { + u32 old0, old1; + + old0 = readl_relaxed(bank->base + bank->regs->leveldetect0); + old1 = readl_relaxed(bank->base + bank->regs->leveldetect1); + + if (!bank->regs->irqstatus_raw0) { + writel_relaxed(old0 | gen, bank->base + + bank->regs->leveldetect0); + writel_relaxed(old1 | gen, bank->base + + bank->regs->leveldetect1); + } + + if (bank->regs->irqstatus_raw0) { + writel_relaxed(old0 | l, bank->base + + bank->regs->leveldetect0); + writel_relaxed(old1 | l, bank->base + + bank->regs->leveldetect1); + } + writel_relaxed(old0, bank->base + bank->regs->leveldetect0); + writel_relaxed(old1, bank->base + bank->regs->leveldetect1); + } + + bank->workaround_enabled = false; + raw_spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} +#endif /* CONFIG_PM */ + +#if IS_BUILTIN(CONFIG_GPIO_OMAP) +void omap2_gpio_prepare_for_idle(int pwr_mode) +{ + struct gpio_bank *bank; + + list_for_each_entry(bank, &omap_gpio_list, node) { + if (!BANK_USED(bank) || !bank->loses_context) + continue; + + bank->power_mode = pwr_mode; + + pm_runtime_put_sync_suspend(bank->chip.parent); + } +} + +void omap2_gpio_resume_after_idle(void) +{ + struct gpio_bank *bank; + + list_for_each_entry(bank, &omap_gpio_list, node) { + if (!BANK_USED(bank) || !bank->loses_context) + continue; + + pm_runtime_get_sync(bank->chip.parent); + } +} +#endif + +#if defined(CONFIG_PM) +static void omap_gpio_init_context(struct gpio_bank *p) +{ + struct omap_gpio_reg_offs *regs = p->regs; + void __iomem *base = p->base; + + p->context.ctrl = readl_relaxed(base + regs->ctrl); + p->context.oe = readl_relaxed(base + regs->direction); + p->context.wake_en = readl_relaxed(base + regs->wkup_en); + p->context.leveldetect0 = readl_relaxed(base + regs->leveldetect0); + p->context.leveldetect1 = readl_relaxed(base + regs->leveldetect1); + p->context.risingdetect = readl_relaxed(base + regs->risingdetect); + p->context.fallingdetect = readl_relaxed(base + regs->fallingdetect); + p->context.irqenable1 = readl_relaxed(base + regs->irqenable); + p->context.irqenable2 = readl_relaxed(base + regs->irqenable2); + + if (regs->set_dataout && p->regs->clr_dataout) + p->context.dataout = readl_relaxed(base + regs->set_dataout); + else + p->context.dataout = readl_relaxed(base + regs->dataout); + + p->context_valid = true; +} + +static void omap_gpio_restore_context(struct gpio_bank *bank) +{ + writel_relaxed(bank->context.wake_en, + bank->base + bank->regs->wkup_en); + writel_relaxed(bank->context.ctrl, bank->base + bank->regs->ctrl); + writel_relaxed(bank->context.leveldetect0, + bank->base + bank->regs->leveldetect0); + writel_relaxed(bank->context.leveldetect1, + bank->base + bank->regs->leveldetect1); + writel_relaxed(bank->context.risingdetect, + bank->base + bank->regs->risingdetect); + writel_relaxed(bank->context.fallingdetect, + bank->base + bank->regs->fallingdetect); + if (bank->regs->set_dataout && bank->regs->clr_dataout) + writel_relaxed(bank->context.dataout, + bank->base + bank->regs->set_dataout); + else + writel_relaxed(bank->context.dataout, + bank->base + bank->regs->dataout); + writel_relaxed(bank->context.oe, bank->base + bank->regs->direction); + + if (bank->dbck_enable_mask) { + writel_relaxed(bank->context.debounce, bank->base + + bank->regs->debounce); + writel_relaxed(bank->context.debounce_en, + bank->base + bank->regs->debounce_en); + } + + writel_relaxed(bank->context.irqenable1, + bank->base + bank->regs->irqenable); + writel_relaxed(bank->context.irqenable2, + bank->base + bank->regs->irqenable2); +} +#endif /* CONFIG_PM */ +#else +#define omap_gpio_runtime_suspend NULL +#define omap_gpio_runtime_resume NULL +static inline void omap_gpio_init_context(struct gpio_bank *p) {} +#endif + +static const struct dev_pm_ops gpio_pm_ops = { + SET_RUNTIME_PM_OPS(omap_gpio_runtime_suspend, omap_gpio_runtime_resume, + NULL) +}; + +#if defined(CONFIG_OF) +static struct omap_gpio_reg_offs omap2_gpio_regs = { + .revision = OMAP24XX_GPIO_REVISION, + .direction = OMAP24XX_GPIO_OE, + .datain = OMAP24XX_GPIO_DATAIN, + .dataout = OMAP24XX_GPIO_DATAOUT, + .set_dataout = OMAP24XX_GPIO_SETDATAOUT, + .clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT, + .irqstatus = OMAP24XX_GPIO_IRQSTATUS1, + .irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2, + .irqenable = OMAP24XX_GPIO_IRQENABLE1, + .irqenable2 = OMAP24XX_GPIO_IRQENABLE2, + .set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1, + .clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1, + .debounce = OMAP24XX_GPIO_DEBOUNCE_VAL, + .debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN, + .ctrl = OMAP24XX_GPIO_CTRL, + .wkup_en = OMAP24XX_GPIO_WAKE_EN, + .leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0, + .leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1, + .risingdetect = OMAP24XX_GPIO_RISINGDETECT, + .fallingdetect = OMAP24XX_GPIO_FALLINGDETECT, +}; + +static struct omap_gpio_reg_offs omap4_gpio_regs = { + .revision = OMAP4_GPIO_REVISION, + .direction = OMAP4_GPIO_OE, + .datain = OMAP4_GPIO_DATAIN, + .dataout = OMAP4_GPIO_DATAOUT, + .set_dataout = OMAP4_GPIO_SETDATAOUT, + .clr_dataout = OMAP4_GPIO_CLEARDATAOUT, + .irqstatus = OMAP4_GPIO_IRQSTATUS0, + .irqstatus2 = OMAP4_GPIO_IRQSTATUS1, + .irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0, + .irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1, + .irqenable = OMAP4_GPIO_IRQSTATUSSET0, + .irqenable2 = OMAP4_GPIO_IRQSTATUSSET1, + .set_irqenable = OMAP4_GPIO_IRQSTATUSSET0, + .clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0, + .debounce = OMAP4_GPIO_DEBOUNCINGTIME, + .debounce_en = OMAP4_GPIO_DEBOUNCENABLE, + .ctrl = OMAP4_GPIO_CTRL, + .wkup_en = OMAP4_GPIO_IRQWAKEN0, + .leveldetect0 = OMAP4_GPIO_LEVELDETECT0, + .leveldetect1 = OMAP4_GPIO_LEVELDETECT1, + .risingdetect = OMAP4_GPIO_RISINGDETECT, + .fallingdetect = OMAP4_GPIO_FALLINGDETECT, +}; + +static const struct omap_gpio_platform_data omap2_pdata = { + .regs = &omap2_gpio_regs, + .bank_width = 32, + .dbck_flag = false, +}; + +static const struct omap_gpio_platform_data omap3_pdata = { + .regs = &omap2_gpio_regs, + .bank_width = 32, + .dbck_flag = true, +}; + +static const struct omap_gpio_platform_data omap4_pdata = { + .regs = &omap4_gpio_regs, + .bank_width = 32, + .dbck_flag = true, +}; + +static const struct of_device_id omap_gpio_match[] = { + { + .compatible = "ti,omap4-gpio", + .data = &omap4_pdata, + }, + { + .compatible = "ti,omap3-gpio", + .data = &omap3_pdata, + }, + { + .compatible = "ti,omap2-gpio", + .data = &omap2_pdata, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, omap_gpio_match); +#endif + +static struct platform_driver omap_gpio_driver = { + .probe = omap_gpio_probe, + .remove = omap_gpio_remove, + .driver = { + .name = "omap_gpio", + .pm = &gpio_pm_ops, + .of_match_table = of_match_ptr(omap_gpio_match), + }, +}; + +/* + * gpio driver register needs to be done before + * machine_init functions access gpio APIs. + * Hence omap_gpio_drv_reg() is a postcore_initcall. + */ +static int __init omap_gpio_drv_reg(void) +{ + return platform_driver_register(&omap_gpio_driver); +} +postcore_initcall(omap_gpio_drv_reg); + +static void __exit omap_gpio_exit(void) +{ + platform_driver_unregister(&omap_gpio_driver); +} +module_exit(omap_gpio_exit); + +MODULE_DESCRIPTION("omap gpio driver"); +MODULE_ALIAS("platform:gpio-omap"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-palmas.c b/drivers/gpio/gpio-palmas.c new file mode 100644 index 000000000..05b0cd5dc --- /dev/null +++ b/drivers/gpio/gpio-palmas.c @@ -0,0 +1,214 @@ +/* + * TI Palma series PMIC's GPIO driver. + * + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/gpio/driver.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mfd/palmas.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> + +struct palmas_gpio { + struct gpio_chip gpio_chip; + struct palmas *palmas; +}; + +struct palmas_device_data { + int ngpio; +}; + +static int palmas_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct palmas_gpio *pg = gpiochip_get_data(gc); + struct palmas *palmas = pg->palmas; + unsigned int val; + int ret; + unsigned int reg; + int gpio16 = (offset/8); + + offset %= 8; + reg = (gpio16) ? PALMAS_GPIO_DATA_DIR2 : PALMAS_GPIO_DATA_DIR; + + ret = palmas_read(palmas, PALMAS_GPIO_BASE, reg, &val); + if (ret < 0) { + dev_err(gc->parent, "Reg 0x%02x read failed, %d\n", reg, ret); + return ret; + } + + if (val & BIT(offset)) + reg = (gpio16) ? PALMAS_GPIO_DATA_OUT2 : PALMAS_GPIO_DATA_OUT; + else + reg = (gpio16) ? PALMAS_GPIO_DATA_IN2 : PALMAS_GPIO_DATA_IN; + + ret = palmas_read(palmas, PALMAS_GPIO_BASE, reg, &val); + if (ret < 0) { + dev_err(gc->parent, "Reg 0x%02x read failed, %d\n", reg, ret); + return ret; + } + return !!(val & BIT(offset)); +} + +static void palmas_gpio_set(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct palmas_gpio *pg = gpiochip_get_data(gc); + struct palmas *palmas = pg->palmas; + int ret; + unsigned int reg; + int gpio16 = (offset/8); + + offset %= 8; + if (gpio16) + reg = (value) ? + PALMAS_GPIO_SET_DATA_OUT2 : PALMAS_GPIO_CLEAR_DATA_OUT2; + else + reg = (value) ? + PALMAS_GPIO_SET_DATA_OUT : PALMAS_GPIO_CLEAR_DATA_OUT; + + ret = palmas_write(palmas, PALMAS_GPIO_BASE, reg, BIT(offset)); + if (ret < 0) + dev_err(gc->parent, "Reg 0x%02x write failed, %d\n", reg, ret); +} + +static int palmas_gpio_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct palmas_gpio *pg = gpiochip_get_data(gc); + struct palmas *palmas = pg->palmas; + int ret; + unsigned int reg; + int gpio16 = (offset/8); + + offset %= 8; + reg = (gpio16) ? PALMAS_GPIO_DATA_DIR2 : PALMAS_GPIO_DATA_DIR; + + /* Set the initial value */ + palmas_gpio_set(gc, offset, value); + + ret = palmas_update_bits(palmas, PALMAS_GPIO_BASE, reg, + BIT(offset), BIT(offset)); + if (ret < 0) + dev_err(gc->parent, "Reg 0x%02x update failed, %d\n", reg, + ret); + return ret; +} + +static int palmas_gpio_input(struct gpio_chip *gc, unsigned offset) +{ + struct palmas_gpio *pg = gpiochip_get_data(gc); + struct palmas *palmas = pg->palmas; + int ret; + unsigned int reg; + int gpio16 = (offset/8); + + offset %= 8; + reg = (gpio16) ? PALMAS_GPIO_DATA_DIR2 : PALMAS_GPIO_DATA_DIR; + + ret = palmas_update_bits(palmas, PALMAS_GPIO_BASE, reg, BIT(offset), 0); + if (ret < 0) + dev_err(gc->parent, "Reg 0x%02x update failed, %d\n", reg, + ret); + return ret; +} + +static int palmas_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct palmas_gpio *pg = gpiochip_get_data(gc); + struct palmas *palmas = pg->palmas; + + return palmas_irq_get_virq(palmas, PALMAS_GPIO_0_IRQ + offset); +} + +static const struct palmas_device_data palmas_dev_data = { + .ngpio = 8, +}; + +static const struct palmas_device_data tps80036_dev_data = { + .ngpio = 16, +}; + +static const struct of_device_id of_palmas_gpio_match[] = { + { .compatible = "ti,palmas-gpio", .data = &palmas_dev_data,}, + { .compatible = "ti,tps65913-gpio", .data = &palmas_dev_data,}, + { .compatible = "ti,tps65914-gpio", .data = &palmas_dev_data,}, + { .compatible = "ti,tps80036-gpio", .data = &tps80036_dev_data,}, + { }, +}; + +static int palmas_gpio_probe(struct platform_device *pdev) +{ + struct palmas *palmas = dev_get_drvdata(pdev->dev.parent); + struct palmas_platform_data *palmas_pdata; + struct palmas_gpio *palmas_gpio; + int ret; + const struct palmas_device_data *dev_data; + + dev_data = of_device_get_match_data(&pdev->dev); + if (!dev_data) + dev_data = &palmas_dev_data; + + palmas_gpio = devm_kzalloc(&pdev->dev, + sizeof(*palmas_gpio), GFP_KERNEL); + if (!palmas_gpio) + return -ENOMEM; + + palmas_gpio->palmas = palmas; + palmas_gpio->gpio_chip.owner = THIS_MODULE; + palmas_gpio->gpio_chip.label = dev_name(&pdev->dev); + palmas_gpio->gpio_chip.ngpio = dev_data->ngpio; + palmas_gpio->gpio_chip.can_sleep = true; + palmas_gpio->gpio_chip.direction_input = palmas_gpio_input; + palmas_gpio->gpio_chip.direction_output = palmas_gpio_output; + palmas_gpio->gpio_chip.to_irq = palmas_gpio_to_irq; + palmas_gpio->gpio_chip.set = palmas_gpio_set; + palmas_gpio->gpio_chip.get = palmas_gpio_get; + palmas_gpio->gpio_chip.parent = &pdev->dev; +#ifdef CONFIG_OF_GPIO + palmas_gpio->gpio_chip.of_node = pdev->dev.of_node; +#endif + palmas_pdata = dev_get_platdata(palmas->dev); + if (palmas_pdata && palmas_pdata->gpio_base) + palmas_gpio->gpio_chip.base = palmas_pdata->gpio_base; + else + palmas_gpio->gpio_chip.base = -1; + + ret = devm_gpiochip_add_data(&pdev->dev, &palmas_gpio->gpio_chip, + palmas_gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, palmas_gpio); + return ret; +} + +static struct platform_driver palmas_gpio_driver = { + .driver.name = "palmas-gpio", + .driver.of_match_table = of_palmas_gpio_match, + .probe = palmas_gpio_probe, +}; + +static int __init palmas_gpio_init(void) +{ + return platform_driver_register(&palmas_gpio_driver); +} +subsys_initcall(palmas_gpio_init); diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c new file mode 100644 index 000000000..dc4088a47 --- /dev/null +++ b/drivers/gpio/gpio-pca953x.c @@ -0,0 +1,1019 @@ +/* + * PCA953x 4/8/16/24/40 bit I/O ports + * + * Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com> + * Copyright (C) 2007 Marvell International Ltd. + * + * Derived from drivers/i2c/chips/pca9539.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include <linux/acpi.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_data/pca953x.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#include <asm/unaligned.h> + +#define PCA953X_INPUT 0x00 +#define PCA953X_OUTPUT 0x01 +#define PCA953X_INVERT 0x02 +#define PCA953X_DIRECTION 0x03 + +#define REG_ADDR_AI 0x80 + +#define PCA957X_IN 0x00 +#define PCA957X_INVRT 0x01 +#define PCA957X_BKEN 0x02 +#define PCA957X_PUPD 0x03 +#define PCA957X_CFG 0x04 +#define PCA957X_OUT 0x05 +#define PCA957X_MSK 0x06 +#define PCA957X_INTS 0x07 + +#define PCAL953X_OUT_STRENGTH 0x20 +#define PCAL953X_IN_LATCH 0x22 +#define PCAL953X_PULL_EN 0x23 +#define PCAL953X_PULL_SEL 0x24 +#define PCAL953X_INT_MASK 0x25 +#define PCAL953X_INT_STAT 0x26 +#define PCAL953X_OUT_CONF 0x27 + +#define PCAL6524_INT_EDGE 0x28 +#define PCAL6524_INT_CLR 0x2a +#define PCAL6524_IN_STATUS 0x2b +#define PCAL6524_OUT_INDCONF 0x2c +#define PCAL6524_DEBOUNCE 0x2d + +#define PCA_GPIO_MASK 0x00FF + +#define PCAL_GPIO_MASK 0x1f +#define PCAL_PINCTRL_MASK 0x60 + +#define PCA_INT 0x0100 +#define PCA_PCAL 0x0200 +#define PCA_LATCH_INT (PCA_PCAL | PCA_INT) +#define PCA953X_TYPE 0x1000 +#define PCA957X_TYPE 0x2000 +#define PCA_TYPE_MASK 0xF000 + +#define PCA_CHIP_TYPE(x) ((x) & PCA_TYPE_MASK) + +static const struct i2c_device_id pca953x_id[] = { + { "pca9505", 40 | PCA953X_TYPE | PCA_INT, }, + { "pca9534", 8 | PCA953X_TYPE | PCA_INT, }, + { "pca9535", 16 | PCA953X_TYPE | PCA_INT, }, + { "pca9536", 4 | PCA953X_TYPE, }, + { "pca9537", 4 | PCA953X_TYPE | PCA_INT, }, + { "pca9538", 8 | PCA953X_TYPE | PCA_INT, }, + { "pca9539", 16 | PCA953X_TYPE | PCA_INT, }, + { "pca9554", 8 | PCA953X_TYPE | PCA_INT, }, + { "pca9555", 16 | PCA953X_TYPE | PCA_INT, }, + { "pca9556", 8 | PCA953X_TYPE, }, + { "pca9557", 8 | PCA953X_TYPE, }, + { "pca9574", 8 | PCA957X_TYPE | PCA_INT, }, + { "pca9575", 16 | PCA957X_TYPE | PCA_INT, }, + { "pca9698", 40 | PCA953X_TYPE, }, + + { "pcal6524", 24 | PCA953X_TYPE | PCA_INT | PCA_PCAL, }, + { "pcal9555a", 16 | PCA953X_TYPE | PCA_INT | PCA_PCAL, }, + + { "max7310", 8 | PCA953X_TYPE, }, + { "max7312", 16 | PCA953X_TYPE | PCA_INT, }, + { "max7313", 16 | PCA953X_TYPE | PCA_INT, }, + { "max7315", 8 | PCA953X_TYPE | PCA_INT, }, + { "max7318", 16 | PCA953X_TYPE | PCA_INT, }, + { "pca6107", 8 | PCA953X_TYPE | PCA_INT, }, + { "tca6408", 8 | PCA953X_TYPE | PCA_INT, }, + { "tca6416", 16 | PCA953X_TYPE | PCA_INT, }, + { "tca6424", 24 | PCA953X_TYPE | PCA_INT, }, + { "tca9539", 16 | PCA953X_TYPE | PCA_INT, }, + { "tca9554", 8 | PCA953X_TYPE | PCA_INT, }, + { "xra1202", 8 | PCA953X_TYPE }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pca953x_id); + +static const struct acpi_device_id pca953x_acpi_ids[] = { + { "INT3491", 16 | PCA953X_TYPE | PCA_INT | PCA_PCAL, }, + { } +}; +MODULE_DEVICE_TABLE(acpi, pca953x_acpi_ids); + +#define MAX_BANK 5 +#define BANK_SZ 8 + +#define NBANK(chip) DIV_ROUND_UP(chip->gpio_chip.ngpio, BANK_SZ) + +struct pca953x_reg_config { + int direction; + int output; + int input; +}; + +static const struct pca953x_reg_config pca953x_regs = { + .direction = PCA953X_DIRECTION, + .output = PCA953X_OUTPUT, + .input = PCA953X_INPUT, +}; + +static const struct pca953x_reg_config pca957x_regs = { + .direction = PCA957X_CFG, + .output = PCA957X_OUT, + .input = PCA957X_IN, +}; + +struct pca953x_chip { + unsigned gpio_start; + u8 reg_output[MAX_BANK]; + u8 reg_direction[MAX_BANK]; + struct mutex i2c_lock; + +#ifdef CONFIG_GPIO_PCA953X_IRQ + struct mutex irq_lock; + u8 irq_mask[MAX_BANK]; + u8 irq_stat[MAX_BANK]; + u8 irq_trig_raise[MAX_BANK]; + u8 irq_trig_fall[MAX_BANK]; +#endif + + struct i2c_client *client; + struct gpio_chip gpio_chip; + const char *const *names; + unsigned long driver_data; + struct regulator *regulator; + + const struct pca953x_reg_config *regs; + + int (*write_regs)(struct pca953x_chip *, int, u8 *); + int (*read_regs)(struct pca953x_chip *, int, u8 *); +}; + +static int pca953x_read_single(struct pca953x_chip *chip, int reg, u32 *val, + int off) +{ + int ret; + int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ); + int offset = off / BANK_SZ; + + ret = i2c_smbus_read_byte_data(chip->client, + (reg << bank_shift) + offset); + *val = ret; + + if (ret < 0) { + dev_err(&chip->client->dev, "failed reading register\n"); + return ret; + } + + return 0; +} + +static int pca953x_write_single(struct pca953x_chip *chip, int reg, u32 val, + int off) +{ + int ret; + int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ); + int offset = off / BANK_SZ; + + ret = i2c_smbus_write_byte_data(chip->client, + (reg << bank_shift) + offset, val); + + if (ret < 0) { + dev_err(&chip->client->dev, "failed writing register\n"); + return ret; + } + + return 0; +} + +static int pca953x_write_regs_8(struct pca953x_chip *chip, int reg, u8 *val) +{ + return i2c_smbus_write_byte_data(chip->client, reg, *val); +} + +static int pca953x_write_regs_16(struct pca953x_chip *chip, int reg, u8 *val) +{ + u16 word = get_unaligned((u16 *)val); + + return i2c_smbus_write_word_data(chip->client, reg << 1, word); +} + +static int pca957x_write_regs_16(struct pca953x_chip *chip, int reg, u8 *val) +{ + int ret; + + ret = i2c_smbus_write_byte_data(chip->client, reg << 1, val[0]); + if (ret < 0) + return ret; + + return i2c_smbus_write_byte_data(chip->client, (reg << 1) + 1, val[1]); +} + +static int pca953x_write_regs_24(struct pca953x_chip *chip, int reg, u8 *val) +{ + int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ); + int addr = (reg & PCAL_GPIO_MASK) << bank_shift; + int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1; + + return i2c_smbus_write_i2c_block_data(chip->client, + pinctrl | addr | REG_ADDR_AI, + NBANK(chip), val); +} + +static int pca953x_write_regs(struct pca953x_chip *chip, int reg, u8 *val) +{ + int ret = 0; + + ret = chip->write_regs(chip, reg, val); + if (ret < 0) { + dev_err(&chip->client->dev, "failed writing register\n"); + return ret; + } + + return 0; +} + +static int pca953x_read_regs_8(struct pca953x_chip *chip, int reg, u8 *val) +{ + int ret; + + ret = i2c_smbus_read_byte_data(chip->client, reg); + *val = ret; + + return ret; +} + +static int pca953x_read_regs_16(struct pca953x_chip *chip, int reg, u8 *val) +{ + int ret; + + ret = i2c_smbus_read_word_data(chip->client, reg << 1); + put_unaligned(ret, (u16 *)val); + + return ret; +} + +static int pca953x_read_regs_24(struct pca953x_chip *chip, int reg, u8 *val) +{ + int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ); + int addr = (reg & PCAL_GPIO_MASK) << bank_shift; + int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1; + + return i2c_smbus_read_i2c_block_data(chip->client, + pinctrl | addr | REG_ADDR_AI, + NBANK(chip), val); +} + +static int pca953x_read_regs(struct pca953x_chip *chip, int reg, u8 *val) +{ + int ret; + + ret = chip->read_regs(chip, reg, val); + if (ret < 0) { + dev_err(&chip->client->dev, "failed reading register\n"); + return ret; + } + + return 0; +} + +static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off) +{ + struct pca953x_chip *chip = gpiochip_get_data(gc); + u8 reg_val; + int ret; + + mutex_lock(&chip->i2c_lock); + reg_val = chip->reg_direction[off / BANK_SZ] | (1u << (off % BANK_SZ)); + + ret = pca953x_write_single(chip, chip->regs->direction, reg_val, off); + if (ret) + goto exit; + + chip->reg_direction[off / BANK_SZ] = reg_val; +exit: + mutex_unlock(&chip->i2c_lock); + return ret; +} + +static int pca953x_gpio_direction_output(struct gpio_chip *gc, + unsigned off, int val) +{ + struct pca953x_chip *chip = gpiochip_get_data(gc); + u8 reg_val; + int ret; + + mutex_lock(&chip->i2c_lock); + /* set output level */ + if (val) + reg_val = chip->reg_output[off / BANK_SZ] + | (1u << (off % BANK_SZ)); + else + reg_val = chip->reg_output[off / BANK_SZ] + & ~(1u << (off % BANK_SZ)); + + ret = pca953x_write_single(chip, chip->regs->output, reg_val, off); + if (ret) + goto exit; + + chip->reg_output[off / BANK_SZ] = reg_val; + + /* then direction */ + reg_val = chip->reg_direction[off / BANK_SZ] & ~(1u << (off % BANK_SZ)); + ret = pca953x_write_single(chip, chip->regs->direction, reg_val, off); + if (ret) + goto exit; + + chip->reg_direction[off / BANK_SZ] = reg_val; +exit: + mutex_unlock(&chip->i2c_lock); + return ret; +} + +static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off) +{ + struct pca953x_chip *chip = gpiochip_get_data(gc); + u32 reg_val; + int ret; + + mutex_lock(&chip->i2c_lock); + ret = pca953x_read_single(chip, chip->regs->input, ®_val, off); + mutex_unlock(&chip->i2c_lock); + if (ret < 0) { + /* NOTE: diagnostic already emitted; that's all we should + * do unless gpio_*_value_cansleep() calls become different + * from their nonsleeping siblings (and report faults). + */ + return 0; + } + + return (reg_val & (1u << (off % BANK_SZ))) ? 1 : 0; +} + +static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val) +{ + struct pca953x_chip *chip = gpiochip_get_data(gc); + u8 reg_val; + int ret; + + mutex_lock(&chip->i2c_lock); + if (val) + reg_val = chip->reg_output[off / BANK_SZ] + | (1u << (off % BANK_SZ)); + else + reg_val = chip->reg_output[off / BANK_SZ] + & ~(1u << (off % BANK_SZ)); + + ret = pca953x_write_single(chip, chip->regs->output, reg_val, off); + if (ret) + goto exit; + + chip->reg_output[off / BANK_SZ] = reg_val; +exit: + mutex_unlock(&chip->i2c_lock); +} + +static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off) +{ + struct pca953x_chip *chip = gpiochip_get_data(gc); + u32 reg_val; + int ret; + + mutex_lock(&chip->i2c_lock); + ret = pca953x_read_single(chip, chip->regs->direction, ®_val, off); + mutex_unlock(&chip->i2c_lock); + if (ret < 0) + return ret; + + return !!(reg_val & (1u << (off % BANK_SZ))); +} + +static void pca953x_gpio_set_multiple(struct gpio_chip *gc, + unsigned long *mask, unsigned long *bits) +{ + struct pca953x_chip *chip = gpiochip_get_data(gc); + unsigned int bank_mask, bank_val; + int bank_shift, bank; + u8 reg_val[MAX_BANK]; + int ret; + + bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ); + + mutex_lock(&chip->i2c_lock); + memcpy(reg_val, chip->reg_output, NBANK(chip)); + for (bank = 0; bank < NBANK(chip); bank++) { + bank_mask = mask[bank / sizeof(*mask)] >> + ((bank % sizeof(*mask)) * 8); + if (bank_mask) { + bank_val = bits[bank / sizeof(*bits)] >> + ((bank % sizeof(*bits)) * 8); + bank_val &= bank_mask; + reg_val[bank] = (reg_val[bank] & ~bank_mask) | bank_val; + } + } + + ret = i2c_smbus_write_i2c_block_data(chip->client, + chip->regs->output << bank_shift, + NBANK(chip), reg_val); + if (ret) + goto exit; + + memcpy(chip->reg_output, reg_val, NBANK(chip)); +exit: + mutex_unlock(&chip->i2c_lock); +} + +static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios) +{ + struct gpio_chip *gc; + + gc = &chip->gpio_chip; + + gc->direction_input = pca953x_gpio_direction_input; + gc->direction_output = pca953x_gpio_direction_output; + gc->get = pca953x_gpio_get_value; + gc->set = pca953x_gpio_set_value; + gc->get_direction = pca953x_gpio_get_direction; + gc->set_multiple = pca953x_gpio_set_multiple; + gc->can_sleep = true; + + gc->base = chip->gpio_start; + gc->ngpio = gpios; + gc->label = chip->client->name; + gc->parent = &chip->client->dev; + gc->owner = THIS_MODULE; + gc->names = chip->names; +} + +#ifdef CONFIG_GPIO_PCA953X_IRQ +static void pca953x_irq_mask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct pca953x_chip *chip = gpiochip_get_data(gc); + + chip->irq_mask[d->hwirq / BANK_SZ] &= ~(1 << (d->hwirq % BANK_SZ)); +} + +static void pca953x_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct pca953x_chip *chip = gpiochip_get_data(gc); + + chip->irq_mask[d->hwirq / BANK_SZ] |= 1 << (d->hwirq % BANK_SZ); +} + +static void pca953x_irq_bus_lock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct pca953x_chip *chip = gpiochip_get_data(gc); + + mutex_lock(&chip->irq_lock); +} + +static void pca953x_irq_bus_sync_unlock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct pca953x_chip *chip = gpiochip_get_data(gc); + u8 new_irqs; + int level, i; + u8 invert_irq_mask[MAX_BANK]; + + if (chip->driver_data & PCA_PCAL) { + /* Enable latch on interrupt-enabled inputs */ + pca953x_write_regs(chip, PCAL953X_IN_LATCH, chip->irq_mask); + + for (i = 0; i < NBANK(chip); i++) + invert_irq_mask[i] = ~chip->irq_mask[i]; + + /* Unmask enabled interrupts */ + pca953x_write_regs(chip, PCAL953X_INT_MASK, invert_irq_mask); + } + + /* Look for any newly setup interrupt */ + for (i = 0; i < NBANK(chip); i++) { + new_irqs = chip->irq_trig_fall[i] | chip->irq_trig_raise[i]; + new_irqs &= ~chip->reg_direction[i]; + + while (new_irqs) { + level = __ffs(new_irqs); + pca953x_gpio_direction_input(&chip->gpio_chip, + level + (BANK_SZ * i)); + new_irqs &= ~(1 << level); + } + } + + mutex_unlock(&chip->irq_lock); +} + +static int pca953x_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct pca953x_chip *chip = gpiochip_get_data(gc); + int bank_nb = d->hwirq / BANK_SZ; + u8 mask = 1 << (d->hwirq % BANK_SZ); + + if (!(type & IRQ_TYPE_EDGE_BOTH)) { + dev_err(&chip->client->dev, "irq %d: unsupported type %d\n", + d->irq, type); + return -EINVAL; + } + + if (type & IRQ_TYPE_EDGE_FALLING) + chip->irq_trig_fall[bank_nb] |= mask; + else + chip->irq_trig_fall[bank_nb] &= ~mask; + + if (type & IRQ_TYPE_EDGE_RISING) + chip->irq_trig_raise[bank_nb] |= mask; + else + chip->irq_trig_raise[bank_nb] &= ~mask; + + return 0; +} + +static void pca953x_irq_shutdown(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct pca953x_chip *chip = gpiochip_get_data(gc); + u8 mask = 1 << (d->hwirq % BANK_SZ); + + chip->irq_trig_raise[d->hwirq / BANK_SZ] &= ~mask; + chip->irq_trig_fall[d->hwirq / BANK_SZ] &= ~mask; +} + +static struct irq_chip pca953x_irq_chip = { + .name = "pca953x", + .irq_mask = pca953x_irq_mask, + .irq_unmask = pca953x_irq_unmask, + .irq_bus_lock = pca953x_irq_bus_lock, + .irq_bus_sync_unlock = pca953x_irq_bus_sync_unlock, + .irq_set_type = pca953x_irq_set_type, + .irq_shutdown = pca953x_irq_shutdown, +}; + +static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending) +{ + u8 cur_stat[MAX_BANK]; + u8 old_stat[MAX_BANK]; + bool pending_seen = false; + bool trigger_seen = false; + u8 trigger[MAX_BANK]; + int ret, i; + + if (chip->driver_data & PCA_PCAL) { + /* Read the current interrupt status from the device */ + ret = pca953x_read_regs(chip, PCAL953X_INT_STAT, trigger); + if (ret) + return false; + + /* Check latched inputs and clear interrupt status */ + ret = pca953x_read_regs(chip, PCA953X_INPUT, cur_stat); + if (ret) + return false; + + for (i = 0; i < NBANK(chip); i++) { + /* Apply filter for rising/falling edge selection */ + pending[i] = (~cur_stat[i] & chip->irq_trig_fall[i]) | + (cur_stat[i] & chip->irq_trig_raise[i]); + pending[i] &= trigger[i]; + if (pending[i]) + pending_seen = true; + } + + return pending_seen; + } + + ret = pca953x_read_regs(chip, chip->regs->input, cur_stat); + if (ret) + return false; + + /* Remove output pins from the equation */ + for (i = 0; i < NBANK(chip); i++) + cur_stat[i] &= chip->reg_direction[i]; + + memcpy(old_stat, chip->irq_stat, NBANK(chip)); + + for (i = 0; i < NBANK(chip); i++) { + trigger[i] = (cur_stat[i] ^ old_stat[i]) & chip->irq_mask[i]; + if (trigger[i]) + trigger_seen = true; + } + + if (!trigger_seen) + return false; + + memcpy(chip->irq_stat, cur_stat, NBANK(chip)); + + for (i = 0; i < NBANK(chip); i++) { + pending[i] = (old_stat[i] & chip->irq_trig_fall[i]) | + (cur_stat[i] & chip->irq_trig_raise[i]); + pending[i] &= trigger[i]; + if (pending[i]) + pending_seen = true; + } + + return pending_seen; +} + +static irqreturn_t pca953x_irq_handler(int irq, void *devid) +{ + struct pca953x_chip *chip = devid; + u8 pending[MAX_BANK]; + u8 level; + unsigned nhandled = 0; + int i; + + if (!pca953x_irq_pending(chip, pending)) + return IRQ_NONE; + + for (i = 0; i < NBANK(chip); i++) { + while (pending[i]) { + level = __ffs(pending[i]); + handle_nested_irq(irq_find_mapping(chip->gpio_chip.irq.domain, + level + (BANK_SZ * i))); + pending[i] &= ~(1 << level); + nhandled++; + } + } + + return (nhandled > 0) ? IRQ_HANDLED : IRQ_NONE; +} + +static int pca953x_irq_setup(struct pca953x_chip *chip, + int irq_base) +{ + struct i2c_client *client = chip->client; + int ret, i; + + if (client->irq && irq_base != -1 + && (chip->driver_data & PCA_INT)) { + ret = pca953x_read_regs(chip, + chip->regs->input, chip->irq_stat); + if (ret) + return ret; + + /* + * There is no way to know which GPIO line generated the + * interrupt. We have to rely on the previous read for + * this purpose. + */ + for (i = 0; i < NBANK(chip); i++) + chip->irq_stat[i] &= chip->reg_direction[i]; + mutex_init(&chip->irq_lock); + + ret = devm_request_threaded_irq(&client->dev, + client->irq, + NULL, + pca953x_irq_handler, + IRQF_TRIGGER_LOW | IRQF_ONESHOT | + IRQF_SHARED, + dev_name(&client->dev), chip); + if (ret) { + dev_err(&client->dev, "failed to request irq %d\n", + client->irq); + return ret; + } + + ret = gpiochip_irqchip_add_nested(&chip->gpio_chip, + &pca953x_irq_chip, + irq_base, + handle_simple_irq, + IRQ_TYPE_NONE); + if (ret) { + dev_err(&client->dev, + "could not connect irqchip to gpiochip\n"); + return ret; + } + + gpiochip_set_nested_irqchip(&chip->gpio_chip, + &pca953x_irq_chip, + client->irq); + } + + return 0; +} + +#else /* CONFIG_GPIO_PCA953X_IRQ */ +static int pca953x_irq_setup(struct pca953x_chip *chip, + int irq_base) +{ + struct i2c_client *client = chip->client; + + if (client->irq && irq_base != -1 && (chip->driver_data & PCA_INT)) + dev_warn(&client->dev, "interrupt support not compiled in\n"); + + return 0; +} +#endif + +static int device_pca953x_init(struct pca953x_chip *chip, u32 invert) +{ + int ret; + u8 val[MAX_BANK]; + + chip->regs = &pca953x_regs; + + ret = pca953x_read_regs(chip, chip->regs->output, chip->reg_output); + if (ret) + goto out; + + ret = pca953x_read_regs(chip, chip->regs->direction, + chip->reg_direction); + if (ret) + goto out; + + /* set platform specific polarity inversion */ + if (invert) + memset(val, 0xFF, NBANK(chip)); + else + memset(val, 0, NBANK(chip)); + + ret = pca953x_write_regs(chip, PCA953X_INVERT, val); +out: + return ret; +} + +static int device_pca957x_init(struct pca953x_chip *chip, u32 invert) +{ + int ret; + u8 val[MAX_BANK]; + + chip->regs = &pca957x_regs; + + ret = pca953x_read_regs(chip, chip->regs->output, chip->reg_output); + if (ret) + goto out; + ret = pca953x_read_regs(chip, chip->regs->direction, + chip->reg_direction); + if (ret) + goto out; + + /* set platform specific polarity inversion */ + if (invert) + memset(val, 0xFF, NBANK(chip)); + else + memset(val, 0, NBANK(chip)); + ret = pca953x_write_regs(chip, PCA957X_INVRT, val); + if (ret) + goto out; + + /* To enable register 6, 7 to control pull up and pull down */ + memset(val, 0x02, NBANK(chip)); + ret = pca953x_write_regs(chip, PCA957X_BKEN, val); + if (ret) + goto out; + + return 0; +out: + return ret; +} + +static const struct of_device_id pca953x_dt_ids[]; + +static int pca953x_probe(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + struct pca953x_platform_data *pdata; + struct pca953x_chip *chip; + int irq_base = 0; + int ret; + u32 invert = 0; + struct regulator *reg; + + chip = devm_kzalloc(&client->dev, + sizeof(struct pca953x_chip), GFP_KERNEL); + if (chip == NULL) + return -ENOMEM; + + pdata = dev_get_platdata(&client->dev); + if (pdata) { + irq_base = pdata->irq_base; + chip->gpio_start = pdata->gpio_base; + invert = pdata->invert; + chip->names = pdata->names; + } else { + struct gpio_desc *reset_gpio; + + chip->gpio_start = -1; + irq_base = 0; + + /* + * See if we need to de-assert a reset pin. + * + * There is no known ACPI-enabled platforms that are + * using "reset" GPIO. Otherwise any of those platform + * must use _DSD method with corresponding property. + */ + reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(reset_gpio)) + return PTR_ERR(reset_gpio); + } + + chip->client = client; + + reg = devm_regulator_get(&client->dev, "vcc"); + if (IS_ERR(reg)) { + ret = PTR_ERR(reg); + if (ret != -EPROBE_DEFER) + dev_err(&client->dev, "reg get err: %d\n", ret); + return ret; + } + ret = regulator_enable(reg); + if (ret) { + dev_err(&client->dev, "reg en err: %d\n", ret); + return ret; + } + chip->regulator = reg; + + if (i2c_id) { + chip->driver_data = i2c_id->driver_data; + } else { + const struct acpi_device_id *acpi_id; + struct device *dev = &client->dev; + + chip->driver_data = (uintptr_t)of_device_get_match_data(dev); + if (!chip->driver_data) { + acpi_id = acpi_match_device(pca953x_acpi_ids, dev); + if (!acpi_id) { + ret = -ENODEV; + goto err_exit; + } + + chip->driver_data = acpi_id->driver_data; + } + } + + mutex_init(&chip->i2c_lock); + /* + * In case we have an i2c-mux controlled by a GPIO provided by an + * expander using the same driver higher on the device tree, read the + * i2c adapter nesting depth and use the retrieved value as lockdep + * subclass for chip->i2c_lock. + * + * REVISIT: This solution is not complete. It protects us from lockdep + * false positives when the expander controlling the i2c-mux is on + * a different level on the device tree, but not when it's on the same + * level on a different branch (in which case the subclass number + * would be the same). + * + * TODO: Once a correct solution is developed, a similar fix should be + * applied to all other i2c-controlled GPIO expanders (and potentially + * regmap-i2c). + */ + lockdep_set_subclass(&chip->i2c_lock, + i2c_adapter_depth(client->adapter)); + + /* initialize cached registers from their original values. + * we can't share this chip with another i2c master. + */ + pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK); + + if (chip->gpio_chip.ngpio <= 8) { + chip->write_regs = pca953x_write_regs_8; + chip->read_regs = pca953x_read_regs_8; + } else if (chip->gpio_chip.ngpio >= 24) { + chip->write_regs = pca953x_write_regs_24; + chip->read_regs = pca953x_read_regs_24; + } else { + if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) + chip->write_regs = pca953x_write_regs_16; + else + chip->write_regs = pca957x_write_regs_16; + chip->read_regs = pca953x_read_regs_16; + } + + if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) + ret = device_pca953x_init(chip, invert); + else + ret = device_pca957x_init(chip, invert); + if (ret) + goto err_exit; + + ret = devm_gpiochip_add_data(&client->dev, &chip->gpio_chip, chip); + if (ret) + goto err_exit; + + ret = pca953x_irq_setup(chip, irq_base); + if (ret) + goto err_exit; + + if (pdata && pdata->setup) { + ret = pdata->setup(client, chip->gpio_chip.base, + chip->gpio_chip.ngpio, pdata->context); + if (ret < 0) + dev_warn(&client->dev, "setup failed, %d\n", ret); + } + + i2c_set_clientdata(client, chip); + return 0; + +err_exit: + regulator_disable(chip->regulator); + return ret; +} + +static int pca953x_remove(struct i2c_client *client) +{ + struct pca953x_platform_data *pdata = dev_get_platdata(&client->dev); + struct pca953x_chip *chip = i2c_get_clientdata(client); + int ret; + + if (pdata && pdata->teardown) { + ret = pdata->teardown(client, chip->gpio_chip.base, + chip->gpio_chip.ngpio, pdata->context); + if (ret < 0) + dev_err(&client->dev, "%s failed, %d\n", + "teardown", ret); + } else { + ret = 0; + } + + regulator_disable(chip->regulator); + + return ret; +} + +/* convenience to stop overlong match-table lines */ +#define OF_953X(__nrgpio, __int) (void *)(__nrgpio | PCA953X_TYPE | __int) +#define OF_957X(__nrgpio, __int) (void *)(__nrgpio | PCA957X_TYPE | __int) + +static const struct of_device_id pca953x_dt_ids[] = { + { .compatible = "nxp,pca9505", .data = OF_953X(40, PCA_INT), }, + { .compatible = "nxp,pca9534", .data = OF_953X( 8, PCA_INT), }, + { .compatible = "nxp,pca9535", .data = OF_953X(16, PCA_INT), }, + { .compatible = "nxp,pca9536", .data = OF_953X( 4, 0), }, + { .compatible = "nxp,pca9537", .data = OF_953X( 4, PCA_INT), }, + { .compatible = "nxp,pca9538", .data = OF_953X( 8, PCA_INT), }, + { .compatible = "nxp,pca9539", .data = OF_953X(16, PCA_INT), }, + { .compatible = "nxp,pca9554", .data = OF_953X( 8, PCA_INT), }, + { .compatible = "nxp,pca9555", .data = OF_953X(16, PCA_INT), }, + { .compatible = "nxp,pca9556", .data = OF_953X( 8, 0), }, + { .compatible = "nxp,pca9557", .data = OF_953X( 8, 0), }, + { .compatible = "nxp,pca9574", .data = OF_957X( 8, PCA_INT), }, + { .compatible = "nxp,pca9575", .data = OF_957X(16, PCA_INT), }, + { .compatible = "nxp,pca9698", .data = OF_953X(40, 0), }, + + { .compatible = "nxp,pcal6524", .data = OF_953X(24, PCA_LATCH_INT), }, + { .compatible = "nxp,pcal9555a", .data = OF_953X(16, PCA_LATCH_INT), }, + + { .compatible = "maxim,max7310", .data = OF_953X( 8, 0), }, + { .compatible = "maxim,max7312", .data = OF_953X(16, PCA_INT), }, + { .compatible = "maxim,max7313", .data = OF_953X(16, PCA_INT), }, + { .compatible = "maxim,max7315", .data = OF_953X( 8, PCA_INT), }, + { .compatible = "maxim,max7318", .data = OF_953X(16, PCA_INT), }, + + { .compatible = "ti,pca6107", .data = OF_953X( 8, PCA_INT), }, + { .compatible = "ti,pca9536", .data = OF_953X( 4, 0), }, + { .compatible = "ti,tca6408", .data = OF_953X( 8, PCA_INT), }, + { .compatible = "ti,tca6416", .data = OF_953X(16, PCA_INT), }, + { .compatible = "ti,tca6424", .data = OF_953X(24, PCA_INT), }, + + { .compatible = "onnn,pca9654", .data = OF_953X( 8, PCA_INT), }, + { .compatible = "onnn,pca9655", .data = OF_953X(16, PCA_INT), }, + + { .compatible = "exar,xra1202", .data = OF_953X( 8, 0), }, + { } +}; + +MODULE_DEVICE_TABLE(of, pca953x_dt_ids); + +static struct i2c_driver pca953x_driver = { + .driver = { + .name = "pca953x", + .of_match_table = pca953x_dt_ids, + .acpi_match_table = ACPI_PTR(pca953x_acpi_ids), + }, + .probe = pca953x_probe, + .remove = pca953x_remove, + .id_table = pca953x_id, +}; + +static int __init pca953x_init(void) +{ + return i2c_add_driver(&pca953x_driver); +} +/* register after i2c postcore initcall and before + * subsys initcalls that may rely on these GPIOs + */ +subsys_initcall(pca953x_init); + +static void __exit pca953x_exit(void) +{ + i2c_del_driver(&pca953x_driver); +} +module_exit(pca953x_exit); + +MODULE_AUTHOR("eric miao <eric.miao@marvell.com>"); +MODULE_DESCRIPTION("GPIO expander driver for PCA953x"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c new file mode 100644 index 000000000..d3fcc0d15 --- /dev/null +++ b/drivers/gpio/gpio-pcf857x.c @@ -0,0 +1,475 @@ +/* + * Driver for pcf857x, pca857x, and pca967x I2C GPIO expanders + * + * Copyright (C) 2007 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/gpio/driver.h> +#include <linux/i2c.h> +#include <linux/platform_data/pcf857x.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + + +static const struct i2c_device_id pcf857x_id[] = { + { "pcf8574", 8 }, + { "pcf8574a", 8 }, + { "pca8574", 8 }, + { "pca9670", 8 }, + { "pca9672", 8 }, + { "pca9674", 8 }, + { "pcf8575", 16 }, + { "pca8575", 16 }, + { "pca9671", 16 }, + { "pca9673", 16 }, + { "pca9675", 16 }, + { "max7328", 8 }, + { "max7329", 8 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pcf857x_id); + +#ifdef CONFIG_OF +static const struct of_device_id pcf857x_of_table[] = { + { .compatible = "nxp,pcf8574" }, + { .compatible = "nxp,pcf8574a" }, + { .compatible = "nxp,pca8574" }, + { .compatible = "nxp,pca9670" }, + { .compatible = "nxp,pca9672" }, + { .compatible = "nxp,pca9674" }, + { .compatible = "nxp,pcf8575" }, + { .compatible = "nxp,pca8575" }, + { .compatible = "nxp,pca9671" }, + { .compatible = "nxp,pca9673" }, + { .compatible = "nxp,pca9675" }, + { .compatible = "maxim,max7328" }, + { .compatible = "maxim,max7329" }, + { } +}; +MODULE_DEVICE_TABLE(of, pcf857x_of_table); +#endif + +/* + * The pcf857x, pca857x, and pca967x chips only expose one read and one + * write register. Writing a "one" bit (to match the reset state) lets + * that pin be used as an input; it's not an open-drain model, but acts + * a bit like one. This is described as "quasi-bidirectional"; read the + * chip documentation for details. + * + * Many other I2C GPIO expander chips (like the pca953x models) have + * more complex register models and more conventional circuitry using + * push/pull drivers. They often use the same 0x20..0x27 addresses as + * pcf857x parts, making the "legacy" I2C driver model problematic. + */ +struct pcf857x { + struct gpio_chip chip; + struct irq_chip irqchip; + struct i2c_client *client; + struct mutex lock; /* protect 'out' */ + unsigned out; /* software latch */ + unsigned status; /* current status */ + unsigned int irq_parent; + unsigned irq_enabled; /* enabled irqs */ + + int (*write)(struct i2c_client *client, unsigned data); + int (*read)(struct i2c_client *client); +}; + +/*-------------------------------------------------------------------------*/ + +/* Talk to 8-bit I/O expander */ + +static int i2c_write_le8(struct i2c_client *client, unsigned data) +{ + return i2c_smbus_write_byte(client, data); +} + +static int i2c_read_le8(struct i2c_client *client) +{ + return (int)i2c_smbus_read_byte(client); +} + +/* Talk to 16-bit I/O expander */ + +static int i2c_write_le16(struct i2c_client *client, unsigned word) +{ + u8 buf[2] = { word & 0xff, word >> 8, }; + int status; + + status = i2c_master_send(client, buf, 2); + return (status < 0) ? status : 0; +} + +static int i2c_read_le16(struct i2c_client *client) +{ + u8 buf[2]; + int status; + + status = i2c_master_recv(client, buf, 2); + if (status < 0) + return status; + return (buf[1] << 8) | buf[0]; +} + +/*-------------------------------------------------------------------------*/ + +static int pcf857x_input(struct gpio_chip *chip, unsigned offset) +{ + struct pcf857x *gpio = gpiochip_get_data(chip); + int status; + + mutex_lock(&gpio->lock); + gpio->out |= (1 << offset); + status = gpio->write(gpio->client, gpio->out); + mutex_unlock(&gpio->lock); + + return status; +} + +static int pcf857x_get(struct gpio_chip *chip, unsigned offset) +{ + struct pcf857x *gpio = gpiochip_get_data(chip); + int value; + + value = gpio->read(gpio->client); + return (value < 0) ? value : !!(value & (1 << offset)); +} + +static int pcf857x_output(struct gpio_chip *chip, unsigned offset, int value) +{ + struct pcf857x *gpio = gpiochip_get_data(chip); + unsigned bit = 1 << offset; + int status; + + mutex_lock(&gpio->lock); + if (value) + gpio->out |= bit; + else + gpio->out &= ~bit; + status = gpio->write(gpio->client, gpio->out); + mutex_unlock(&gpio->lock); + + return status; +} + +static void pcf857x_set(struct gpio_chip *chip, unsigned offset, int value) +{ + pcf857x_output(chip, offset, value); +} + +/*-------------------------------------------------------------------------*/ + +static irqreturn_t pcf857x_irq(int irq, void *data) +{ + struct pcf857x *gpio = data; + unsigned long change, i, status; + + status = gpio->read(gpio->client); + + /* + * call the interrupt handler iff gpio is used as + * interrupt source, just to avoid bad irqs + */ + mutex_lock(&gpio->lock); + change = (gpio->status ^ status) & gpio->irq_enabled; + gpio->status = status; + mutex_unlock(&gpio->lock); + + for_each_set_bit(i, &change, gpio->chip.ngpio) + handle_nested_irq(irq_find_mapping(gpio->chip.irq.domain, i)); + + return IRQ_HANDLED; +} + +/* + * NOP functions + */ +static void noop(struct irq_data *data) { } + +static int pcf857x_irq_set_wake(struct irq_data *data, unsigned int on) +{ + struct pcf857x *gpio = irq_data_get_irq_chip_data(data); + + int error = 0; + + if (gpio->irq_parent) { + error = irq_set_irq_wake(gpio->irq_parent, on); + if (error) { + dev_dbg(&gpio->client->dev, + "irq %u doesn't support irq_set_wake\n", + gpio->irq_parent); + gpio->irq_parent = 0; + } + } + return error; +} + +static void pcf857x_irq_enable(struct irq_data *data) +{ + struct pcf857x *gpio = irq_data_get_irq_chip_data(data); + + gpio->irq_enabled |= (1 << data->hwirq); +} + +static void pcf857x_irq_disable(struct irq_data *data) +{ + struct pcf857x *gpio = irq_data_get_irq_chip_data(data); + + gpio->irq_enabled &= ~(1 << data->hwirq); +} + +static void pcf857x_irq_bus_lock(struct irq_data *data) +{ + struct pcf857x *gpio = irq_data_get_irq_chip_data(data); + + mutex_lock(&gpio->lock); +} + +static void pcf857x_irq_bus_sync_unlock(struct irq_data *data) +{ + struct pcf857x *gpio = irq_data_get_irq_chip_data(data); + + mutex_unlock(&gpio->lock); +} + +/*-------------------------------------------------------------------------*/ + +static int pcf857x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pcf857x_platform_data *pdata = dev_get_platdata(&client->dev); + struct device_node *np = client->dev.of_node; + struct pcf857x *gpio; + unsigned int n_latch = 0; + int status; + + if (IS_ENABLED(CONFIG_OF) && np) + of_property_read_u32(np, "lines-initial-states", &n_latch); + else if (pdata) + n_latch = pdata->n_latch; + else + dev_dbg(&client->dev, "no platform data\n"); + + /* Allocate, initialize, and register this gpio_chip. */ + gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + mutex_init(&gpio->lock); + + gpio->chip.base = pdata ? pdata->gpio_base : -1; + gpio->chip.can_sleep = true; + gpio->chip.parent = &client->dev; + gpio->chip.owner = THIS_MODULE; + gpio->chip.get = pcf857x_get; + gpio->chip.set = pcf857x_set; + gpio->chip.direction_input = pcf857x_input; + gpio->chip.direction_output = pcf857x_output; + gpio->chip.ngpio = id->driver_data; + + /* NOTE: the OnSemi jlc1562b is also largely compatible with + * these parts, notably for output. It has a low-resolution + * DAC instead of pin change IRQs; and its inputs can be the + * result of comparators. + */ + + /* 8574 addresses are 0x20..0x27; 8574a uses 0x38..0x3f; + * 9670, 9672, 9764, and 9764a use quite a variety. + * + * NOTE: we don't distinguish here between *4 and *4a parts. + */ + if (gpio->chip.ngpio == 8) { + gpio->write = i2c_write_le8; + gpio->read = i2c_read_le8; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE)) + status = -EIO; + + /* fail if there's no chip present */ + else + status = i2c_smbus_read_byte(client); + + /* '75/'75c addresses are 0x20..0x27, just like the '74; + * the '75c doesn't have a current source pulling high. + * 9671, 9673, and 9765 use quite a variety of addresses. + * + * NOTE: we don't distinguish here between '75 and '75c parts. + */ + } else if (gpio->chip.ngpio == 16) { + gpio->write = i2c_write_le16; + gpio->read = i2c_read_le16; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + status = -EIO; + + /* fail if there's no chip present */ + else + status = i2c_read_le16(client); + + } else { + dev_dbg(&client->dev, "unsupported number of gpios\n"); + status = -EINVAL; + } + + if (status < 0) + goto fail; + + gpio->chip.label = client->name; + + gpio->client = client; + i2c_set_clientdata(client, gpio); + + /* NOTE: these chips have strange "quasi-bidirectional" I/O pins. + * We can't actually know whether a pin is configured (a) as output + * and driving the signal low, or (b) as input and reporting a low + * value ... without knowing the last value written since the chip + * came out of reset (if any). We can't read the latched output. + * + * In short, the only reliable solution for setting up pin direction + * is to do it explicitly. The setup() method can do that, but it + * may cause transient glitching since it can't know the last value + * written (some pins may need to be driven low). + * + * Using n_latch avoids that trouble. When left initialized to zero, + * our software copy of the "latch" then matches the chip's all-ones + * reset state. Otherwise it flags pins to be driven low. + */ + gpio->out = ~n_latch; + gpio->status = gpio->read(gpio->client); + + status = devm_gpiochip_add_data(&client->dev, &gpio->chip, gpio); + if (status < 0) + goto fail; + + /* Enable irqchip if we have an interrupt */ + if (client->irq) { + gpio->irqchip.name = "pcf857x", + gpio->irqchip.irq_enable = pcf857x_irq_enable, + gpio->irqchip.irq_disable = pcf857x_irq_disable, + gpio->irqchip.irq_ack = noop, + gpio->irqchip.irq_mask = noop, + gpio->irqchip.irq_unmask = noop, + gpio->irqchip.irq_set_wake = pcf857x_irq_set_wake, + gpio->irqchip.irq_bus_lock = pcf857x_irq_bus_lock, + gpio->irqchip.irq_bus_sync_unlock = pcf857x_irq_bus_sync_unlock, + status = gpiochip_irqchip_add_nested(&gpio->chip, + &gpio->irqchip, + 0, handle_level_irq, + IRQ_TYPE_NONE); + if (status) { + dev_err(&client->dev, "cannot add irqchip\n"); + goto fail; + } + + status = devm_request_threaded_irq(&client->dev, client->irq, + NULL, pcf857x_irq, IRQF_ONESHOT | + IRQF_TRIGGER_FALLING | IRQF_SHARED, + dev_name(&client->dev), gpio); + if (status) + goto fail; + + gpiochip_set_nested_irqchip(&gpio->chip, &gpio->irqchip, + client->irq); + gpio->irq_parent = client->irq; + } + + /* Let platform code set up the GPIOs and their users. + * Now is the first time anyone could use them. + */ + if (pdata && pdata->setup) { + status = pdata->setup(client, + gpio->chip.base, gpio->chip.ngpio, + pdata->context); + if (status < 0) + dev_warn(&client->dev, "setup --> %d\n", status); + } + + dev_info(&client->dev, "probed\n"); + + return 0; + +fail: + dev_dbg(&client->dev, "probe error %d for '%s'\n", status, + client->name); + + return status; +} + +static int pcf857x_remove(struct i2c_client *client) +{ + struct pcf857x_platform_data *pdata = dev_get_platdata(&client->dev); + struct pcf857x *gpio = i2c_get_clientdata(client); + int status = 0; + + if (pdata && pdata->teardown) { + status = pdata->teardown(client, + gpio->chip.base, gpio->chip.ngpio, + pdata->context); + if (status < 0) { + dev_err(&client->dev, "%s --> %d\n", + "teardown", status); + return status; + } + } + + return status; +} + +static void pcf857x_shutdown(struct i2c_client *client) +{ + struct pcf857x *gpio = i2c_get_clientdata(client); + + /* Drive all the I/O lines high */ + gpio->write(gpio->client, BIT(gpio->chip.ngpio) - 1); +} + +static struct i2c_driver pcf857x_driver = { + .driver = { + .name = "pcf857x", + .of_match_table = of_match_ptr(pcf857x_of_table), + }, + .probe = pcf857x_probe, + .remove = pcf857x_remove, + .shutdown = pcf857x_shutdown, + .id_table = pcf857x_id, +}; + +static int __init pcf857x_init(void) +{ + return i2c_add_driver(&pcf857x_driver); +} +/* register after i2c postcore initcall and before + * subsys initcalls that may rely on these GPIOs + */ +subsys_initcall(pcf857x_init); + +static void __exit pcf857x_exit(void) +{ + i2c_del_driver(&pcf857x_driver); +} +module_exit(pcf857x_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Brownell"); diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c new file mode 100644 index 000000000..8c7f3d20e --- /dev/null +++ b/drivers/gpio/gpio-pch.c @@ -0,0 +1,548 @@ +/* + * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/slab.h> + +#define PCH_EDGE_FALLING 0 +#define PCH_EDGE_RISING BIT(0) +#define PCH_LEVEL_L BIT(1) +#define PCH_LEVEL_H (BIT(0) | BIT(1)) +#define PCH_EDGE_BOTH BIT(2) +#define PCH_IM_MASK (BIT(0) | BIT(1) | BIT(2)) + +#define PCH_IRQ_BASE 24 + +struct pch_regs { + u32 ien; + u32 istatus; + u32 idisp; + u32 iclr; + u32 imask; + u32 imaskclr; + u32 po; + u32 pi; + u32 pm; + u32 im0; + u32 im1; + u32 reserved[3]; + u32 gpio_use_sel; + u32 reset; +}; + +enum pch_type_t { + INTEL_EG20T_PCH, + OKISEMI_ML7223m_IOH, /* LAPIS Semiconductor ML7223 IOH PCIe Bus-m */ + OKISEMI_ML7223n_IOH /* LAPIS Semiconductor ML7223 IOH PCIe Bus-n */ +}; + +/* Specifies number of GPIO PINS */ +static int gpio_pins[] = { + [INTEL_EG20T_PCH] = 12, + [OKISEMI_ML7223m_IOH] = 8, + [OKISEMI_ML7223n_IOH] = 8, +}; + +/** + * struct pch_gpio_reg_data - The register store data. + * @ien_reg: To store contents of IEN register. + * @imask_reg: To store contents of IMASK register. + * @po_reg: To store contents of PO register. + * @pm_reg: To store contents of PM register. + * @im0_reg: To store contents of IM0 register. + * @im1_reg: To store contents of IM1 register. + * @gpio_use_sel_reg : To store contents of GPIO_USE_SEL register. + * (Only ML7223 Bus-n) + */ +struct pch_gpio_reg_data { + u32 ien_reg; + u32 imask_reg; + u32 po_reg; + u32 pm_reg; + u32 im0_reg; + u32 im1_reg; + u32 gpio_use_sel_reg; +}; + +/** + * struct pch_gpio - GPIO private data structure. + * @base: PCI base address of Memory mapped I/O register. + * @reg: Memory mapped PCH GPIO register list. + * @dev: Pointer to device structure. + * @gpio: Data for GPIO infrastructure. + * @pch_gpio_reg: Memory mapped Register data is saved here + * when suspend. + * @lock: Used for register access protection + * @irq_base: Save base of IRQ number for interrupt + * @ioh: IOH ID + * @spinlock: Used for register access protection + */ +struct pch_gpio { + void __iomem *base; + struct pch_regs __iomem *reg; + struct device *dev; + struct gpio_chip gpio; + struct pch_gpio_reg_data pch_gpio_reg; + int irq_base; + enum pch_type_t ioh; + spinlock_t spinlock; +}; + +static void pch_gpio_set(struct gpio_chip *gpio, unsigned nr, int val) +{ + u32 reg_val; + struct pch_gpio *chip = gpiochip_get_data(gpio); + unsigned long flags; + + spin_lock_irqsave(&chip->spinlock, flags); + reg_val = ioread32(&chip->reg->po); + if (val) + reg_val |= (1 << nr); + else + reg_val &= ~(1 << nr); + + iowrite32(reg_val, &chip->reg->po); + spin_unlock_irqrestore(&chip->spinlock, flags); +} + +static int pch_gpio_get(struct gpio_chip *gpio, unsigned nr) +{ + struct pch_gpio *chip = gpiochip_get_data(gpio); + + return (ioread32(&chip->reg->pi) >> nr) & 1; +} + +static int pch_gpio_direction_output(struct gpio_chip *gpio, unsigned nr, + int val) +{ + struct pch_gpio *chip = gpiochip_get_data(gpio); + u32 pm; + u32 reg_val; + unsigned long flags; + + spin_lock_irqsave(&chip->spinlock, flags); + + reg_val = ioread32(&chip->reg->po); + if (val) + reg_val |= (1 << nr); + else + reg_val &= ~(1 << nr); + iowrite32(reg_val, &chip->reg->po); + + pm = ioread32(&chip->reg->pm) & ((1 << gpio_pins[chip->ioh]) - 1); + pm |= (1 << nr); + iowrite32(pm, &chip->reg->pm); + + spin_unlock_irqrestore(&chip->spinlock, flags); + + return 0; +} + +static int pch_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) +{ + struct pch_gpio *chip = gpiochip_get_data(gpio); + u32 pm; + unsigned long flags; + + spin_lock_irqsave(&chip->spinlock, flags); + pm = ioread32(&chip->reg->pm) & ((1 << gpio_pins[chip->ioh]) - 1); + pm &= ~(1 << nr); + iowrite32(pm, &chip->reg->pm); + spin_unlock_irqrestore(&chip->spinlock, flags); + + return 0; +} + +#ifdef CONFIG_PM +/* + * Save register configuration and disable interrupts. + */ +static void pch_gpio_save_reg_conf(struct pch_gpio *chip) +{ + chip->pch_gpio_reg.ien_reg = ioread32(&chip->reg->ien); + chip->pch_gpio_reg.imask_reg = ioread32(&chip->reg->imask); + chip->pch_gpio_reg.po_reg = ioread32(&chip->reg->po); + chip->pch_gpio_reg.pm_reg = ioread32(&chip->reg->pm); + chip->pch_gpio_reg.im0_reg = ioread32(&chip->reg->im0); + if (chip->ioh == INTEL_EG20T_PCH) + chip->pch_gpio_reg.im1_reg = ioread32(&chip->reg->im1); + if (chip->ioh == OKISEMI_ML7223n_IOH) + chip->pch_gpio_reg.gpio_use_sel_reg =\ + ioread32(&chip->reg->gpio_use_sel); +} + +/* + * This function restores the register configuration of the GPIO device. + */ +static void pch_gpio_restore_reg_conf(struct pch_gpio *chip) +{ + iowrite32(chip->pch_gpio_reg.ien_reg, &chip->reg->ien); + iowrite32(chip->pch_gpio_reg.imask_reg, &chip->reg->imask); + /* to store contents of PO register */ + iowrite32(chip->pch_gpio_reg.po_reg, &chip->reg->po); + /* to store contents of PM register */ + iowrite32(chip->pch_gpio_reg.pm_reg, &chip->reg->pm); + iowrite32(chip->pch_gpio_reg.im0_reg, &chip->reg->im0); + if (chip->ioh == INTEL_EG20T_PCH) + iowrite32(chip->pch_gpio_reg.im1_reg, &chip->reg->im1); + if (chip->ioh == OKISEMI_ML7223n_IOH) + iowrite32(chip->pch_gpio_reg.gpio_use_sel_reg, + &chip->reg->gpio_use_sel); +} +#endif + +static int pch_gpio_to_irq(struct gpio_chip *gpio, unsigned offset) +{ + struct pch_gpio *chip = gpiochip_get_data(gpio); + return chip->irq_base + offset; +} + +static void pch_gpio_setup(struct pch_gpio *chip) +{ + struct gpio_chip *gpio = &chip->gpio; + + gpio->label = dev_name(chip->dev); + gpio->parent = chip->dev; + gpio->owner = THIS_MODULE; + gpio->direction_input = pch_gpio_direction_input; + gpio->get = pch_gpio_get; + gpio->direction_output = pch_gpio_direction_output; + gpio->set = pch_gpio_set; + gpio->dbg_show = NULL; + gpio->base = -1; + gpio->ngpio = gpio_pins[chip->ioh]; + gpio->can_sleep = false; + gpio->to_irq = pch_gpio_to_irq; +} + +static int pch_irq_type(struct irq_data *d, unsigned int type) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct pch_gpio *chip = gc->private; + u32 im, im_pos, val; + u32 __iomem *im_reg; + unsigned long flags; + int ch, irq = d->irq; + + ch = irq - chip->irq_base; + if (irq <= chip->irq_base + 7) { + im_reg = &chip->reg->im0; + im_pos = ch; + } else { + im_reg = &chip->reg->im1; + im_pos = ch - 8; + } + dev_dbg(chip->dev, "%s:irq=%d type=%d ch=%d pos=%d\n", + __func__, irq, type, ch, im_pos); + + spin_lock_irqsave(&chip->spinlock, flags); + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + val = PCH_EDGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + val = PCH_EDGE_FALLING; + break; + case IRQ_TYPE_EDGE_BOTH: + val = PCH_EDGE_BOTH; + break; + case IRQ_TYPE_LEVEL_HIGH: + val = PCH_LEVEL_H; + break; + case IRQ_TYPE_LEVEL_LOW: + val = PCH_LEVEL_L; + break; + default: + goto unlock; + } + + /* Set interrupt mode */ + im = ioread32(im_reg) & ~(PCH_IM_MASK << (im_pos * 4)); + iowrite32(im | (val << (im_pos * 4)), im_reg); + + /* And the handler */ + if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) + irq_set_handler_locked(d, handle_level_irq); + else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + irq_set_handler_locked(d, handle_edge_irq); + +unlock: + spin_unlock_irqrestore(&chip->spinlock, flags); + return 0; +} + +static void pch_irq_unmask(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct pch_gpio *chip = gc->private; + + iowrite32(1 << (d->irq - chip->irq_base), &chip->reg->imaskclr); +} + +static void pch_irq_mask(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct pch_gpio *chip = gc->private; + + iowrite32(1 << (d->irq - chip->irq_base), &chip->reg->imask); +} + +static void pch_irq_ack(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct pch_gpio *chip = gc->private; + + iowrite32(1 << (d->irq - chip->irq_base), &chip->reg->iclr); +} + +static irqreturn_t pch_gpio_handler(int irq, void *dev_id) +{ + struct pch_gpio *chip = dev_id; + u32 reg_val = ioread32(&chip->reg->istatus); + int i, ret = IRQ_NONE; + + for (i = 0; i < gpio_pins[chip->ioh]; i++) { + if (reg_val & BIT(i)) { + dev_dbg(chip->dev, "%s:[%d]:irq=%d status=0x%x\n", + __func__, i, irq, reg_val); + generic_handle_irq(chip->irq_base + i); + ret = IRQ_HANDLED; + } + } + return ret; +} + +static int pch_gpio_alloc_generic_chip(struct pch_gpio *chip, + unsigned int irq_start, + unsigned int num) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + int rv; + + gc = devm_irq_alloc_generic_chip(chip->dev, "pch_gpio", 1, irq_start, + chip->base, handle_simple_irq); + if (!gc) + return -ENOMEM; + + gc->private = chip; + ct = gc->chip_types; + + ct->chip.irq_ack = pch_irq_ack; + ct->chip.irq_mask = pch_irq_mask; + ct->chip.irq_unmask = pch_irq_unmask; + ct->chip.irq_set_type = pch_irq_type; + + rv = devm_irq_setup_generic_chip(chip->dev, gc, IRQ_MSK(num), + IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); + + return rv; +} + +static int pch_gpio_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + s32 ret; + struct pch_gpio *chip; + int irq_base; + u32 msk; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (chip == NULL) + return -ENOMEM; + + chip->dev = &pdev->dev; + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "%s : pci_enable_device FAILED", __func__); + goto err_pci_enable; + } + + ret = pci_request_regions(pdev, KBUILD_MODNAME); + if (ret) { + dev_err(&pdev->dev, "pci_request_regions FAILED-%d", ret); + goto err_request_regions; + } + + chip->base = pci_iomap(pdev, 1, 0); + if (!chip->base) { + dev_err(&pdev->dev, "%s : pci_iomap FAILED", __func__); + ret = -ENOMEM; + goto err_iomap; + } + + if (pdev->device == 0x8803) + chip->ioh = INTEL_EG20T_PCH; + else if (pdev->device == 0x8014) + chip->ioh = OKISEMI_ML7223m_IOH; + else if (pdev->device == 0x8043) + chip->ioh = OKISEMI_ML7223n_IOH; + + chip->reg = chip->base; + pci_set_drvdata(pdev, chip); + spin_lock_init(&chip->spinlock); + pch_gpio_setup(chip); +#ifdef CONFIG_OF_GPIO + chip->gpio.of_node = pdev->dev.of_node; +#endif + ret = gpiochip_add_data(&chip->gpio, chip); + if (ret) { + dev_err(&pdev->dev, "PCH gpio: Failed to register GPIO\n"); + goto err_gpiochip_add; + } + + irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, + gpio_pins[chip->ioh], NUMA_NO_NODE); + if (irq_base < 0) { + dev_warn(&pdev->dev, "PCH gpio: Failed to get IRQ base num\n"); + chip->irq_base = -1; + goto end; + } + chip->irq_base = irq_base; + + /* Mask all interrupts, but enable them */ + msk = (1 << gpio_pins[chip->ioh]) - 1; + iowrite32(msk, &chip->reg->imask); + iowrite32(msk, &chip->reg->ien); + + ret = devm_request_irq(&pdev->dev, pdev->irq, pch_gpio_handler, + IRQF_SHARED, KBUILD_MODNAME, chip); + if (ret != 0) { + dev_err(&pdev->dev, + "%s request_irq failed\n", __func__); + goto err_request_irq; + } + + ret = pch_gpio_alloc_generic_chip(chip, irq_base, + gpio_pins[chip->ioh]); + if (ret) + goto err_request_irq; + +end: + return 0; + +err_request_irq: + gpiochip_remove(&chip->gpio); + +err_gpiochip_add: + pci_iounmap(pdev, chip->base); + +err_iomap: + pci_release_regions(pdev); + +err_request_regions: + pci_disable_device(pdev); + +err_pci_enable: + kfree(chip); + dev_err(&pdev->dev, "%s Failed returns %d\n", __func__, ret); + return ret; +} + +static void pch_gpio_remove(struct pci_dev *pdev) +{ + struct pch_gpio *chip = pci_get_drvdata(pdev); + + gpiochip_remove(&chip->gpio); + pci_iounmap(pdev, chip->base); + pci_release_regions(pdev); + pci_disable_device(pdev); + kfree(chip); +} + +#ifdef CONFIG_PM +static int pch_gpio_suspend(struct pci_dev *pdev, pm_message_t state) +{ + s32 ret; + struct pch_gpio *chip = pci_get_drvdata(pdev); + unsigned long flags; + + spin_lock_irqsave(&chip->spinlock, flags); + pch_gpio_save_reg_conf(chip); + spin_unlock_irqrestore(&chip->spinlock, flags); + + ret = pci_save_state(pdev); + if (ret) { + dev_err(&pdev->dev, "pci_save_state Failed-%d\n", ret); + return ret; + } + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D0); + ret = pci_enable_wake(pdev, PCI_D0, 1); + if (ret) + dev_err(&pdev->dev, "pci_enable_wake Failed -%d\n", ret); + + return 0; +} + +static int pch_gpio_resume(struct pci_dev *pdev) +{ + s32 ret; + struct pch_gpio *chip = pci_get_drvdata(pdev); + unsigned long flags; + + ret = pci_enable_wake(pdev, PCI_D0, 0); + + pci_set_power_state(pdev, PCI_D0); + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "pci_enable_device Failed-%d ", ret); + return ret; + } + pci_restore_state(pdev); + + spin_lock_irqsave(&chip->spinlock, flags); + iowrite32(0x01, &chip->reg->reset); + iowrite32(0x00, &chip->reg->reset); + pch_gpio_restore_reg_conf(chip); + spin_unlock_irqrestore(&chip->spinlock, flags); + + return 0; +} +#else +#define pch_gpio_suspend NULL +#define pch_gpio_resume NULL +#endif + +static const struct pci_device_id pch_gpio_pcidev_id[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803) }, + { PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8014) }, + { PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8043) }, + { PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8803) }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, pch_gpio_pcidev_id); + +static struct pci_driver pch_gpio_driver = { + .name = "pch_gpio", + .id_table = pch_gpio_pcidev_id, + .probe = pch_gpio_probe, + .remove = pch_gpio_remove, + .suspend = pch_gpio_suspend, + .resume = pch_gpio_resume +}; + +module_pci_driver(pch_gpio_driver); + +MODULE_DESCRIPTION("PCH GPIO PCI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-pci-idio-16.c b/drivers/gpio/gpio-pci-idio-16.c new file mode 100644 index 000000000..25d16b2af --- /dev/null +++ b/drivers/gpio/gpio-pci-idio-16.c @@ -0,0 +1,399 @@ +/* + * GPIO driver for the ACCES PCI-IDIO-16 + * Copyright (C) 2017 William Breathitt Gray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ +#include <linux/bitmap.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/irqdesc.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +/** + * struct idio_16_gpio_reg - GPIO device registers structure + * @out0_7: Read: FET Drive Outputs 0-7 + * Write: FET Drive Outputs 0-7 + * @in0_7: Read: Isolated Inputs 0-7 + * Write: Clear Interrupt + * @irq_ctl: Read: Enable IRQ + * Write: Disable IRQ + * @filter_ctl: Read: Activate Input Filters 0-15 + * Write: Deactivate Input Filters 0-15 + * @out8_15: Read: FET Drive Outputs 8-15 + * Write: FET Drive Outputs 8-15 + * @in8_15: Read: Isolated Inputs 8-15 + * Write: Unused + * @irq_status: Read: Interrupt status + * Write: Unused + */ +struct idio_16_gpio_reg { + u8 out0_7; + u8 in0_7; + u8 irq_ctl; + u8 filter_ctl; + u8 out8_15; + u8 in8_15; + u8 irq_status; +}; + +/** + * struct idio_16_gpio - GPIO device private data structure + * @chip: instance of the gpio_chip + * @lock: synchronization lock to prevent I/O race conditions + * @reg: I/O address offset for the GPIO device registers + * @irq_mask: I/O bits affected by interrupts + */ +struct idio_16_gpio { + struct gpio_chip chip; + raw_spinlock_t lock; + struct idio_16_gpio_reg __iomem *reg; + unsigned long irq_mask; +}; + +static int idio_16_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + if (offset > 15) + return 1; + + return 0; +} + +static int idio_16_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + return 0; +} + +static int idio_16_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + chip->set(chip, offset, value); + return 0; +} + +static int idio_16_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip); + unsigned long mask = BIT(offset); + + if (offset < 8) + return !!(ioread8(&idio16gpio->reg->out0_7) & mask); + + if (offset < 16) + return !!(ioread8(&idio16gpio->reg->out8_15) & (mask >> 8)); + + if (offset < 24) + return !!(ioread8(&idio16gpio->reg->in0_7) & (mask >> 16)); + + return !!(ioread8(&idio16gpio->reg->in8_15) & (mask >> 24)); +} + +static int idio_16_gpio_get_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip); + size_t i; + const unsigned int gpio_reg_size = 8; + unsigned int bits_offset; + size_t word_index; + unsigned int word_offset; + unsigned long word_mask; + const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0); + unsigned long port_state; + void __iomem *ports[] = { + &idio16gpio->reg->out0_7, &idio16gpio->reg->out8_15, + &idio16gpio->reg->in0_7, &idio16gpio->reg->in8_15, + }; + + /* clear bits array to a clean slate */ + bitmap_zero(bits, chip->ngpio); + + /* get bits are evaluated a gpio port register at a time */ + for (i = 0; i < ARRAY_SIZE(ports); i++) { + /* gpio offset in bits array */ + bits_offset = i * gpio_reg_size; + + /* word index for bits array */ + word_index = BIT_WORD(bits_offset); + + /* gpio offset within current word of bits array */ + word_offset = bits_offset % BITS_PER_LONG; + + /* mask of get bits for current gpio within current word */ + word_mask = mask[word_index] & (port_mask << word_offset); + if (!word_mask) { + /* no get bits in this port so skip to next one */ + continue; + } + + /* read bits from current gpio port */ + port_state = ioread8(ports[i]); + + /* store acquired bits at respective bits array offset */ + bits[word_index] |= port_state << word_offset; + } + + return 0; +} + +static void idio_16_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip); + unsigned int mask = BIT(offset); + void __iomem *base; + unsigned long flags; + unsigned int out_state; + + if (offset > 15) + return; + + if (offset > 7) { + mask >>= 8; + base = &idio16gpio->reg->out8_15; + } else + base = &idio16gpio->reg->out0_7; + + raw_spin_lock_irqsave(&idio16gpio->lock, flags); + + if (value) + out_state = ioread8(base) | mask; + else + out_state = ioread8(base) & ~mask; + + iowrite8(out_state, base); + + raw_spin_unlock_irqrestore(&idio16gpio->lock, flags); +} + +static void idio_16_gpio_set_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip); + unsigned long flags; + unsigned int out_state; + + raw_spin_lock_irqsave(&idio16gpio->lock, flags); + + /* process output lines 0-7 */ + if (*mask & 0xFF) { + out_state = ioread8(&idio16gpio->reg->out0_7) & ~*mask; + out_state |= *mask & *bits; + iowrite8(out_state, &idio16gpio->reg->out0_7); + } + + /* shift to next output line word */ + *mask >>= 8; + + /* process output lines 8-15 */ + if (*mask & 0xFF) { + *bits >>= 8; + out_state = ioread8(&idio16gpio->reg->out8_15) & ~*mask; + out_state |= *mask & *bits; + iowrite8(out_state, &idio16gpio->reg->out8_15); + } + + raw_spin_unlock_irqrestore(&idio16gpio->lock, flags); +} + +static void idio_16_irq_ack(struct irq_data *data) +{ +} + +static void idio_16_irq_mask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip); + const unsigned long mask = BIT(irqd_to_hwirq(data)); + unsigned long flags; + + idio16gpio->irq_mask &= ~mask; + + if (!idio16gpio->irq_mask) { + raw_spin_lock_irqsave(&idio16gpio->lock, flags); + + iowrite8(0, &idio16gpio->reg->irq_ctl); + + raw_spin_unlock_irqrestore(&idio16gpio->lock, flags); + } +} + +static void idio_16_irq_unmask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip); + const unsigned long mask = BIT(irqd_to_hwirq(data)); + const unsigned long prev_irq_mask = idio16gpio->irq_mask; + unsigned long flags; + + idio16gpio->irq_mask |= mask; + + if (!prev_irq_mask) { + raw_spin_lock_irqsave(&idio16gpio->lock, flags); + + ioread8(&idio16gpio->reg->irq_ctl); + + raw_spin_unlock_irqrestore(&idio16gpio->lock, flags); + } +} + +static int idio_16_irq_set_type(struct irq_data *data, unsigned int flow_type) +{ + /* The only valid irq types are none and both-edges */ + if (flow_type != IRQ_TYPE_NONE && + (flow_type & IRQ_TYPE_EDGE_BOTH) != IRQ_TYPE_EDGE_BOTH) + return -EINVAL; + + return 0; +} + +static struct irq_chip idio_16_irqchip = { + .name = "pci-idio-16", + .irq_ack = idio_16_irq_ack, + .irq_mask = idio_16_irq_mask, + .irq_unmask = idio_16_irq_unmask, + .irq_set_type = idio_16_irq_set_type +}; + +static irqreturn_t idio_16_irq_handler(int irq, void *dev_id) +{ + struct idio_16_gpio *const idio16gpio = dev_id; + unsigned int irq_status; + struct gpio_chip *const chip = &idio16gpio->chip; + int gpio; + + raw_spin_lock(&idio16gpio->lock); + + irq_status = ioread8(&idio16gpio->reg->irq_status); + + raw_spin_unlock(&idio16gpio->lock); + + /* Make sure our device generated IRQ */ + if (!(irq_status & 0x3) || !(irq_status & 0x4)) + return IRQ_NONE; + + for_each_set_bit(gpio, &idio16gpio->irq_mask, chip->ngpio) + generic_handle_irq(irq_find_mapping(chip->irq.domain, gpio)); + + raw_spin_lock(&idio16gpio->lock); + + /* Clear interrupt */ + iowrite8(0, &idio16gpio->reg->in0_7); + + raw_spin_unlock(&idio16gpio->lock); + + return IRQ_HANDLED; +} + +#define IDIO_16_NGPIO 32 +static const char *idio_16_names[IDIO_16_NGPIO] = { + "OUT0", "OUT1", "OUT2", "OUT3", "OUT4", "OUT5", "OUT6", "OUT7", + "OUT8", "OUT9", "OUT10", "OUT11", "OUT12", "OUT13", "OUT14", "OUT15", + "IIN0", "IIN1", "IIN2", "IIN3", "IIN4", "IIN5", "IIN6", "IIN7", + "IIN8", "IIN9", "IIN10", "IIN11", "IIN12", "IIN13", "IIN14", "IIN15" +}; + +static int idio_16_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct device *const dev = &pdev->dev; + struct idio_16_gpio *idio16gpio; + int err; + const size_t pci_bar_index = 2; + const char *const name = pci_name(pdev); + + idio16gpio = devm_kzalloc(dev, sizeof(*idio16gpio), GFP_KERNEL); + if (!idio16gpio) + return -ENOMEM; + + err = pcim_enable_device(pdev); + if (err) { + dev_err(dev, "Failed to enable PCI device (%d)\n", err); + return err; + } + + err = pcim_iomap_regions(pdev, BIT(pci_bar_index), name); + if (err) { + dev_err(dev, "Unable to map PCI I/O addresses (%d)\n", err); + return err; + } + + idio16gpio->reg = pcim_iomap_table(pdev)[pci_bar_index]; + + /* Deactivate input filters */ + iowrite8(0, &idio16gpio->reg->filter_ctl); + + idio16gpio->chip.label = name; + idio16gpio->chip.parent = dev; + idio16gpio->chip.owner = THIS_MODULE; + idio16gpio->chip.base = -1; + idio16gpio->chip.ngpio = IDIO_16_NGPIO; + idio16gpio->chip.names = idio_16_names; + idio16gpio->chip.get_direction = idio_16_gpio_get_direction; + idio16gpio->chip.direction_input = idio_16_gpio_direction_input; + idio16gpio->chip.direction_output = idio_16_gpio_direction_output; + idio16gpio->chip.get = idio_16_gpio_get; + idio16gpio->chip.get_multiple = idio_16_gpio_get_multiple; + idio16gpio->chip.set = idio_16_gpio_set; + idio16gpio->chip.set_multiple = idio_16_gpio_set_multiple; + + raw_spin_lock_init(&idio16gpio->lock); + + err = devm_gpiochip_add_data(dev, &idio16gpio->chip, idio16gpio); + if (err) { + dev_err(dev, "GPIO registering failed (%d)\n", err); + return err; + } + + /* Disable IRQ by default and clear any pending interrupt */ + iowrite8(0, &idio16gpio->reg->irq_ctl); + iowrite8(0, &idio16gpio->reg->in0_7); + + err = gpiochip_irqchip_add(&idio16gpio->chip, &idio_16_irqchip, 0, + handle_edge_irq, IRQ_TYPE_NONE); + if (err) { + dev_err(dev, "Could not add irqchip (%d)\n", err); + return err; + } + + err = devm_request_irq(dev, pdev->irq, idio_16_irq_handler, IRQF_SHARED, + name, idio16gpio); + if (err) { + dev_err(dev, "IRQ handler registering failed (%d)\n", err); + return err; + } + + return 0; +} + +static const struct pci_device_id idio_16_pci_dev_id[] = { + { PCI_DEVICE(0x494F, 0x0DC8) }, { 0 } +}; +MODULE_DEVICE_TABLE(pci, idio_16_pci_dev_id); + +static struct pci_driver idio_16_driver = { + .name = "pci-idio-16", + .id_table = idio_16_pci_dev_id, + .probe = idio_16_probe +}; + +module_pci_driver(idio_16_driver); + +MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); +MODULE_DESCRIPTION("ACCES PCI-IDIO-16 GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-pcie-idio-24.c b/drivers/gpio/gpio-pcie-idio-24.c new file mode 100644 index 000000000..634125747 --- /dev/null +++ b/drivers/gpio/gpio-pcie-idio-24.c @@ -0,0 +1,614 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GPIO driver for the ACCES PCIe-IDIO-24 family + * Copyright (C) 2018 William Breathitt Gray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * This driver supports the following ACCES devices: PCIe-IDIO-24, + * PCIe-IDI-24, PCIe-IDO-24, and PCIe-IDIO-12. + */ +#include <linux/bitmap.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/irqdesc.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +/* + * PLX PEX8311 PCI LCS_INTCSR Interrupt Control/Status + * + * Bit: Description + * 0: Enable Interrupt Sources (Bit 0) + * 1: Enable Interrupt Sources (Bit 1) + * 2: Generate Internal PCI Bus Internal SERR# Interrupt + * 3: Mailbox Interrupt Enable + * 4: Power Management Interrupt Enable + * 5: Power Management Interrupt + * 6: Slave Read Local Data Parity Check Error Enable + * 7: Slave Read Local Data Parity Check Error Status + * 8: Internal PCI Wire Interrupt Enable + * 9: PCI Express Doorbell Interrupt Enable + * 10: PCI Abort Interrupt Enable + * 11: Local Interrupt Input Enable + * 12: Retry Abort Enable + * 13: PCI Express Doorbell Interrupt Active + * 14: PCI Abort Interrupt Active + * 15: Local Interrupt Input Active + * 16: Local Interrupt Output Enable + * 17: Local Doorbell Interrupt Enable + * 18: DMA Channel 0 Interrupt Enable + * 19: DMA Channel 1 Interrupt Enable + * 20: Local Doorbell Interrupt Active + * 21: DMA Channel 0 Interrupt Active + * 22: DMA Channel 1 Interrupt Active + * 23: Built-In Self-Test (BIST) Interrupt Active + * 24: Direct Master was the Bus Master during a Master or Target Abort + * 25: DMA Channel 0 was the Bus Master during a Master or Target Abort + * 26: DMA Channel 1 was the Bus Master during a Master or Target Abort + * 27: Target Abort after internal 256 consecutive Master Retrys + * 28: PCI Bus wrote data to LCS_MBOX0 + * 29: PCI Bus wrote data to LCS_MBOX1 + * 30: PCI Bus wrote data to LCS_MBOX2 + * 31: PCI Bus wrote data to LCS_MBOX3 + */ +#define PLX_PEX8311_PCI_LCS_INTCSR 0x68 +#define INTCSR_INTERNAL_PCI_WIRE BIT(8) +#define INTCSR_LOCAL_INPUT BIT(11) + +/** + * struct idio_24_gpio_reg - GPIO device registers structure + * @out0_7: Read: FET Outputs 0-7 + * Write: FET Outputs 0-7 + * @out8_15: Read: FET Outputs 8-15 + * Write: FET Outputs 8-15 + * @out16_23: Read: FET Outputs 16-23 + * Write: FET Outputs 16-23 + * @ttl_out0_7: Read: TTL/CMOS Outputs 0-7 + * Write: TTL/CMOS Outputs 0-7 + * @in0_7: Read: Isolated Inputs 0-7 + * Write: Reserved + * @in8_15: Read: Isolated Inputs 8-15 + * Write: Reserved + * @in16_23: Read: Isolated Inputs 16-23 + * Write: Reserved + * @ttl_in0_7: Read: TTL/CMOS Inputs 0-7 + * Write: Reserved + * @cos0_7: Read: COS Status Inputs 0-7 + * Write: COS Clear Inputs 0-7 + * @cos8_15: Read: COS Status Inputs 8-15 + * Write: COS Clear Inputs 8-15 + * @cos16_23: Read: COS Status Inputs 16-23 + * Write: COS Clear Inputs 16-23 + * @cos_ttl0_7: Read: COS Status TTL/CMOS 0-7 + * Write: COS Clear TTL/CMOS 0-7 + * @ctl: Read: Control Register + * Write: Control Register + * @reserved: Read: Reserved + * Write: Reserved + * @cos_enable: Read: COS Enable + * Write: COS Enable + * @soft_reset: Read: IRQ Output Pin Status + * Write: Software Board Reset + */ +struct idio_24_gpio_reg { + u8 out0_7; + u8 out8_15; + u8 out16_23; + u8 ttl_out0_7; + u8 in0_7; + u8 in8_15; + u8 in16_23; + u8 ttl_in0_7; + u8 cos0_7; + u8 cos8_15; + u8 cos16_23; + u8 cos_ttl0_7; + u8 ctl; + u8 reserved; + u8 cos_enable; + u8 soft_reset; +}; + +/** + * struct idio_24_gpio - GPIO device private data structure + * @chip: instance of the gpio_chip + * @lock: synchronization lock to prevent I/O race conditions + * @reg: I/O address offset for the GPIO device registers + * @irq_mask: I/O bits affected by interrupts + */ +struct idio_24_gpio { + struct gpio_chip chip; + raw_spinlock_t lock; + __u8 __iomem *plx; + struct idio_24_gpio_reg __iomem *reg; + unsigned long irq_mask; +}; + +static int idio_24_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip); + const unsigned long out_mode_mask = BIT(1); + + /* FET Outputs */ + if (offset < 24) + return 0; + + /* Isolated Inputs */ + if (offset < 48) + return 1; + + /* TTL/CMOS I/O */ + /* OUT MODE = 1 when TTL/CMOS Output Mode is set */ + return !(ioread8(&idio24gpio->reg->ctl) & out_mode_mask); +} + +static int idio_24_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip); + unsigned long flags; + unsigned int ctl_state; + const unsigned long out_mode_mask = BIT(1); + + /* TTL/CMOS I/O */ + if (offset > 47) { + raw_spin_lock_irqsave(&idio24gpio->lock, flags); + + /* Clear TTL/CMOS Output Mode */ + ctl_state = ioread8(&idio24gpio->reg->ctl) & ~out_mode_mask; + iowrite8(ctl_state, &idio24gpio->reg->ctl); + + raw_spin_unlock_irqrestore(&idio24gpio->lock, flags); + } + + return 0; +} + +static int idio_24_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip); + unsigned long flags; + unsigned int ctl_state; + const unsigned long out_mode_mask = BIT(1); + + /* TTL/CMOS I/O */ + if (offset > 47) { + raw_spin_lock_irqsave(&idio24gpio->lock, flags); + + /* Set TTL/CMOS Output Mode */ + ctl_state = ioread8(&idio24gpio->reg->ctl) | out_mode_mask; + iowrite8(ctl_state, &idio24gpio->reg->ctl); + + raw_spin_unlock_irqrestore(&idio24gpio->lock, flags); + } + + chip->set(chip, offset, value); + return 0; +} + +static int idio_24_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip); + const unsigned long offset_mask = BIT(offset % 8); + const unsigned long out_mode_mask = BIT(1); + + /* FET Outputs */ + if (offset < 8) + return !!(ioread8(&idio24gpio->reg->out0_7) & offset_mask); + + if (offset < 16) + return !!(ioread8(&idio24gpio->reg->out8_15) & offset_mask); + + if (offset < 24) + return !!(ioread8(&idio24gpio->reg->out16_23) & offset_mask); + + /* Isolated Inputs */ + if (offset < 32) + return !!(ioread8(&idio24gpio->reg->in0_7) & offset_mask); + + if (offset < 40) + return !!(ioread8(&idio24gpio->reg->in8_15) & offset_mask); + + if (offset < 48) + return !!(ioread8(&idio24gpio->reg->in16_23) & offset_mask); + + /* TTL/CMOS Outputs */ + if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask) + return !!(ioread8(&idio24gpio->reg->ttl_out0_7) & offset_mask); + + /* TTL/CMOS Inputs */ + return !!(ioread8(&idio24gpio->reg->ttl_in0_7) & offset_mask); +} + +static int idio_24_gpio_get_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip); + size_t i; + const unsigned int gpio_reg_size = 8; + unsigned int bits_offset; + size_t word_index; + unsigned int word_offset; + unsigned long word_mask; + const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0); + unsigned long port_state; + void __iomem *ports[] = { + &idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15, + &idio24gpio->reg->out16_23, &idio24gpio->reg->in0_7, + &idio24gpio->reg->in8_15, &idio24gpio->reg->in16_23, + }; + const unsigned long out_mode_mask = BIT(1); + + /* clear bits array to a clean slate */ + bitmap_zero(bits, chip->ngpio); + + /* get bits are evaluated a gpio port register at a time */ + for (i = 0; i < ARRAY_SIZE(ports) + 1; i++) { + /* gpio offset in bits array */ + bits_offset = i * gpio_reg_size; + + /* word index for bits array */ + word_index = BIT_WORD(bits_offset); + + /* gpio offset within current word of bits array */ + word_offset = bits_offset % BITS_PER_LONG; + + /* mask of get bits for current gpio within current word */ + word_mask = mask[word_index] & (port_mask << word_offset); + if (!word_mask) { + /* no get bits in this port so skip to next one */ + continue; + } + + /* read bits from current gpio port (port 6 is TTL GPIO) */ + if (i < 6) + port_state = ioread8(ports[i]); + else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask) + port_state = ioread8(&idio24gpio->reg->ttl_out0_7); + else + port_state = ioread8(&idio24gpio->reg->ttl_in0_7); + + /* store acquired bits at respective bits array offset */ + bits[word_index] |= port_state << word_offset; + } + + return 0; +} + +static void idio_24_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip); + const unsigned long out_mode_mask = BIT(1); + void __iomem *base; + const unsigned int mask = BIT(offset % 8); + unsigned long flags; + unsigned int out_state; + + /* Isolated Inputs */ + if (offset > 23 && offset < 48) + return; + + /* TTL/CMOS Inputs */ + if (offset > 47 && !(ioread8(&idio24gpio->reg->ctl) & out_mode_mask)) + return; + + /* TTL/CMOS Outputs */ + if (offset > 47) + base = &idio24gpio->reg->ttl_out0_7; + /* FET Outputs */ + else if (offset > 15) + base = &idio24gpio->reg->out16_23; + else if (offset > 7) + base = &idio24gpio->reg->out8_15; + else + base = &idio24gpio->reg->out0_7; + + raw_spin_lock_irqsave(&idio24gpio->lock, flags); + + if (value) + out_state = ioread8(base) | mask; + else + out_state = ioread8(base) & ~mask; + + iowrite8(out_state, base); + + raw_spin_unlock_irqrestore(&idio24gpio->lock, flags); +} + +static void idio_24_gpio_set_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip); + size_t i; + unsigned long bits_offset; + unsigned long gpio_mask; + const unsigned int gpio_reg_size = 8; + const unsigned long port_mask = GENMASK(gpio_reg_size, 0); + unsigned long flags; + unsigned int out_state; + void __iomem *ports[] = { + &idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15, + &idio24gpio->reg->out16_23 + }; + const unsigned long out_mode_mask = BIT(1); + const unsigned int ttl_offset = 48; + const size_t ttl_i = BIT_WORD(ttl_offset); + const unsigned int word_offset = ttl_offset % BITS_PER_LONG; + const unsigned long ttl_mask = (mask[ttl_i] >> word_offset) & port_mask; + const unsigned long ttl_bits = (bits[ttl_i] >> word_offset) & ttl_mask; + + /* set bits are processed a gpio port register at a time */ + for (i = 0; i < ARRAY_SIZE(ports); i++) { + /* gpio offset in bits array */ + bits_offset = i * gpio_reg_size; + + /* check if any set bits for current port */ + gpio_mask = (*mask >> bits_offset) & port_mask; + if (!gpio_mask) { + /* no set bits for this port so move on to next port */ + continue; + } + + raw_spin_lock_irqsave(&idio24gpio->lock, flags); + + /* process output lines */ + out_state = ioread8(ports[i]) & ~gpio_mask; + out_state |= (*bits >> bits_offset) & gpio_mask; + iowrite8(out_state, ports[i]); + + raw_spin_unlock_irqrestore(&idio24gpio->lock, flags); + } + + /* check if setting TTL lines and if they are in output mode */ + if (!ttl_mask || !(ioread8(&idio24gpio->reg->ctl) & out_mode_mask)) + return; + + /* handle TTL output */ + raw_spin_lock_irqsave(&idio24gpio->lock, flags); + + /* process output lines */ + out_state = ioread8(&idio24gpio->reg->ttl_out0_7) & ~ttl_mask; + out_state |= ttl_bits; + iowrite8(out_state, &idio24gpio->reg->ttl_out0_7); + + raw_spin_unlock_irqrestore(&idio24gpio->lock, flags); +} + +static void idio_24_irq_ack(struct irq_data *data) +{ +} + +static void idio_24_irq_mask(struct irq_data *data) +{ + struct gpio_chip *const chip = irq_data_get_irq_chip_data(data); + struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip); + unsigned long flags; + const unsigned long bit_offset = irqd_to_hwirq(data) - 24; + unsigned char new_irq_mask; + const unsigned long bank_offset = bit_offset / 8; + unsigned char cos_enable_state; + + raw_spin_lock_irqsave(&idio24gpio->lock, flags); + + idio24gpio->irq_mask &= ~BIT(bit_offset); + new_irq_mask = idio24gpio->irq_mask >> bank_offset * 8; + + if (!new_irq_mask) { + cos_enable_state = ioread8(&idio24gpio->reg->cos_enable); + + /* Disable Rising Edge detection */ + cos_enable_state &= ~BIT(bank_offset); + /* Disable Falling Edge detection */ + cos_enable_state &= ~BIT(bank_offset + 4); + + iowrite8(cos_enable_state, &idio24gpio->reg->cos_enable); + } + + raw_spin_unlock_irqrestore(&idio24gpio->lock, flags); +} + +static void idio_24_irq_unmask(struct irq_data *data) +{ + struct gpio_chip *const chip = irq_data_get_irq_chip_data(data); + struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip); + unsigned long flags; + unsigned char prev_irq_mask; + const unsigned long bit_offset = irqd_to_hwirq(data) - 24; + const unsigned long bank_offset = bit_offset / 8; + unsigned char cos_enable_state; + + raw_spin_lock_irqsave(&idio24gpio->lock, flags); + + prev_irq_mask = idio24gpio->irq_mask >> bank_offset * 8; + idio24gpio->irq_mask |= BIT(bit_offset); + + if (!prev_irq_mask) { + cos_enable_state = ioread8(&idio24gpio->reg->cos_enable); + + /* Enable Rising Edge detection */ + cos_enable_state |= BIT(bank_offset); + /* Enable Falling Edge detection */ + cos_enable_state |= BIT(bank_offset + 4); + + iowrite8(cos_enable_state, &idio24gpio->reg->cos_enable); + } + + raw_spin_unlock_irqrestore(&idio24gpio->lock, flags); +} + +static int idio_24_irq_set_type(struct irq_data *data, unsigned int flow_type) +{ + /* The only valid irq types are none and both-edges */ + if (flow_type != IRQ_TYPE_NONE && + (flow_type & IRQ_TYPE_EDGE_BOTH) != IRQ_TYPE_EDGE_BOTH) + return -EINVAL; + + return 0; +} + +static struct irq_chip idio_24_irqchip = { + .name = "pcie-idio-24", + .irq_ack = idio_24_irq_ack, + .irq_mask = idio_24_irq_mask, + .irq_unmask = idio_24_irq_unmask, + .irq_set_type = idio_24_irq_set_type +}; + +static irqreturn_t idio_24_irq_handler(int irq, void *dev_id) +{ + struct idio_24_gpio *const idio24gpio = dev_id; + unsigned long irq_status; + struct gpio_chip *const chip = &idio24gpio->chip; + unsigned long irq_mask; + int gpio; + + raw_spin_lock(&idio24gpio->lock); + + /* Read Change-Of-State status */ + irq_status = ioread32(&idio24gpio->reg->cos0_7); + + raw_spin_unlock(&idio24gpio->lock); + + /* Make sure our device generated IRQ */ + if (!irq_status) + return IRQ_NONE; + + /* Handle only unmasked IRQ */ + irq_mask = idio24gpio->irq_mask & irq_status; + + for_each_set_bit(gpio, &irq_mask, chip->ngpio - 24) + generic_handle_irq(irq_find_mapping(chip->irq.domain, + gpio + 24)); + + raw_spin_lock(&idio24gpio->lock); + + /* Clear Change-Of-State status */ + iowrite32(irq_status, &idio24gpio->reg->cos0_7); + + raw_spin_unlock(&idio24gpio->lock); + + return IRQ_HANDLED; +} + +#define IDIO_24_NGPIO 56 +static const char *idio_24_names[IDIO_24_NGPIO] = { + "OUT0", "OUT1", "OUT2", "OUT3", "OUT4", "OUT5", "OUT6", "OUT7", + "OUT8", "OUT9", "OUT10", "OUT11", "OUT12", "OUT13", "OUT14", "OUT15", + "OUT16", "OUT17", "OUT18", "OUT19", "OUT20", "OUT21", "OUT22", "OUT23", + "IIN0", "IIN1", "IIN2", "IIN3", "IIN4", "IIN5", "IIN6", "IIN7", + "IIN8", "IIN9", "IIN10", "IIN11", "IIN12", "IIN13", "IIN14", "IIN15", + "IIN16", "IIN17", "IIN18", "IIN19", "IIN20", "IIN21", "IIN22", "IIN23", + "TTL0", "TTL1", "TTL2", "TTL3", "TTL4", "TTL5", "TTL6", "TTL7" +}; + +static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct device *const dev = &pdev->dev; + struct idio_24_gpio *idio24gpio; + int err; + const size_t pci_plx_bar_index = 1; + const size_t pci_bar_index = 2; + const char *const name = pci_name(pdev); + + idio24gpio = devm_kzalloc(dev, sizeof(*idio24gpio), GFP_KERNEL); + if (!idio24gpio) + return -ENOMEM; + + err = pcim_enable_device(pdev); + if (err) { + dev_err(dev, "Failed to enable PCI device (%d)\n", err); + return err; + } + + err = pcim_iomap_regions(pdev, BIT(pci_plx_bar_index) | BIT(pci_bar_index), name); + if (err) { + dev_err(dev, "Unable to map PCI I/O addresses (%d)\n", err); + return err; + } + + idio24gpio->plx = pcim_iomap_table(pdev)[pci_plx_bar_index]; + idio24gpio->reg = pcim_iomap_table(pdev)[pci_bar_index]; + + idio24gpio->chip.label = name; + idio24gpio->chip.parent = dev; + idio24gpio->chip.owner = THIS_MODULE; + idio24gpio->chip.base = -1; + idio24gpio->chip.ngpio = IDIO_24_NGPIO; + idio24gpio->chip.names = idio_24_names; + idio24gpio->chip.get_direction = idio_24_gpio_get_direction; + idio24gpio->chip.direction_input = idio_24_gpio_direction_input; + idio24gpio->chip.direction_output = idio_24_gpio_direction_output; + idio24gpio->chip.get = idio_24_gpio_get; + idio24gpio->chip.get_multiple = idio_24_gpio_get_multiple; + idio24gpio->chip.set = idio_24_gpio_set; + idio24gpio->chip.set_multiple = idio_24_gpio_set_multiple; + + raw_spin_lock_init(&idio24gpio->lock); + + /* Software board reset */ + iowrite8(0, &idio24gpio->reg->soft_reset); + /* + * enable PLX PEX8311 internal PCI wire interrupt and local interrupt + * input + */ + iowrite8((INTCSR_INTERNAL_PCI_WIRE | INTCSR_LOCAL_INPUT) >> 8, + idio24gpio->plx + PLX_PEX8311_PCI_LCS_INTCSR + 1); + + err = devm_gpiochip_add_data(dev, &idio24gpio->chip, idio24gpio); + if (err) { + dev_err(dev, "GPIO registering failed (%d)\n", err); + return err; + } + + err = gpiochip_irqchip_add(&idio24gpio->chip, &idio_24_irqchip, 0, + handle_edge_irq, IRQ_TYPE_NONE); + if (err) { + dev_err(dev, "Could not add irqchip (%d)\n", err); + return err; + } + + err = devm_request_irq(dev, pdev->irq, idio_24_irq_handler, IRQF_SHARED, + name, idio24gpio); + if (err) { + dev_err(dev, "IRQ handler registering failed (%d)\n", err); + return err; + } + + return 0; +} + +static const struct pci_device_id idio_24_pci_dev_id[] = { + { PCI_DEVICE(0x494F, 0x0FD0) }, { PCI_DEVICE(0x494F, 0x0BD0) }, + { PCI_DEVICE(0x494F, 0x07D0) }, { PCI_DEVICE(0x494F, 0x0FC0) }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, idio_24_pci_dev_id); + +static struct pci_driver idio_24_driver = { + .name = "pcie-idio-24", + .id_table = idio_24_pci_dev_id, + .probe = idio_24_probe +}; + +module_pci_driver(idio_24_driver); + +MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); +MODULE_DESCRIPTION("ACCES PCIe-IDIO-24 GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-pisosr.c b/drivers/gpio/gpio-pisosr.c new file mode 100644 index 000000000..f809a5a8e --- /dev/null +++ b/drivers/gpio/gpio-pisosr.c @@ -0,0 +1,205 @@ +/* + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis <afd@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + */ + +#include <linux/bitmap.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/spi/spi.h> + +#define DEFAULT_NGPIO 8 + +/** + * struct pisosr_gpio - GPIO driver data + * @chip: GPIO controller chip + * @spi: SPI device pointer + * @buffer: Buffer for device reads + * @buffer_size: Size of buffer + * @load_gpio: GPIO pin used to load input into device + * @lock: Protects read sequences + */ +struct pisosr_gpio { + struct gpio_chip chip; + struct spi_device *spi; + u8 *buffer; + size_t buffer_size; + struct gpio_desc *load_gpio; + struct mutex lock; +}; + +static int pisosr_gpio_refresh(struct pisosr_gpio *gpio) +{ + int ret; + + mutex_lock(&gpio->lock); + + if (gpio->load_gpio) { + gpiod_set_value_cansleep(gpio->load_gpio, 1); + udelay(1); /* registers load time (~10ns) */ + gpiod_set_value_cansleep(gpio->load_gpio, 0); + udelay(1); /* registers recovery time (~5ns) */ + } + + ret = spi_read(gpio->spi, gpio->buffer, gpio->buffer_size); + + mutex_unlock(&gpio->lock); + + return ret; +} + +static int pisosr_gpio_get_direction(struct gpio_chip *chip, + unsigned offset) +{ + /* This device always input */ + return 1; +} + +static int pisosr_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + /* This device always input */ + return 0; +} + +static int pisosr_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + /* This device is input only */ + return -EINVAL; +} + +static int pisosr_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct pisosr_gpio *gpio = gpiochip_get_data(chip); + + /* Refresh may not always be needed */ + pisosr_gpio_refresh(gpio); + + return (gpio->buffer[offset / 8] >> (offset % 8)) & 0x1; +} + +static int pisosr_gpio_get_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct pisosr_gpio *gpio = gpiochip_get_data(chip); + unsigned int nbytes = DIV_ROUND_UP(chip->ngpio, 8); + unsigned int i, j; + + pisosr_gpio_refresh(gpio); + + bitmap_zero(bits, chip->ngpio); + for (i = 0; i < nbytes; i++) { + j = i / sizeof(unsigned long); + bits[j] |= ((unsigned long) gpio->buffer[i]) + << (8 * (i % sizeof(unsigned long))); + } + + return 0; +} + +static const struct gpio_chip template_chip = { + .label = "pisosr-gpio", + .owner = THIS_MODULE, + .get_direction = pisosr_gpio_get_direction, + .direction_input = pisosr_gpio_direction_input, + .direction_output = pisosr_gpio_direction_output, + .get = pisosr_gpio_get, + .get_multiple = pisosr_gpio_get_multiple, + .base = -1, + .ngpio = DEFAULT_NGPIO, + .can_sleep = true, +}; + +static int pisosr_gpio_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct pisosr_gpio *gpio; + int ret; + + gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + spi_set_drvdata(spi, gpio); + + gpio->chip = template_chip; + gpio->chip.parent = dev; + of_property_read_u16(dev->of_node, "ngpios", &gpio->chip.ngpio); + + gpio->spi = spi; + + gpio->buffer_size = DIV_ROUND_UP(gpio->chip.ngpio, 8); + gpio->buffer = devm_kzalloc(dev, gpio->buffer_size, GFP_KERNEL); + if (!gpio->buffer) + return -ENOMEM; + + gpio->load_gpio = devm_gpiod_get_optional(dev, "load", GPIOD_OUT_LOW); + if (IS_ERR(gpio->load_gpio)) { + ret = PTR_ERR(gpio->load_gpio); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Unable to allocate load GPIO\n"); + return ret; + } + + mutex_init(&gpio->lock); + + ret = gpiochip_add_data(&gpio->chip, gpio); + if (ret < 0) { + dev_err(dev, "Unable to register gpiochip\n"); + return ret; + } + + return 0; +} + +static int pisosr_gpio_remove(struct spi_device *spi) +{ + struct pisosr_gpio *gpio = spi_get_drvdata(spi); + + gpiochip_remove(&gpio->chip); + + mutex_destroy(&gpio->lock); + + return 0; +} + +static const struct spi_device_id pisosr_gpio_id_table[] = { + { "pisosr-gpio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(spi, pisosr_gpio_id_table); + +static const struct of_device_id pisosr_gpio_of_match_table[] = { + { .compatible = "pisosr-gpio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, pisosr_gpio_of_match_table); + +static struct spi_driver pisosr_gpio_driver = { + .driver = { + .name = "pisosr-gpio", + .of_match_table = pisosr_gpio_of_match_table, + }, + .probe = pisosr_gpio_probe, + .remove = pisosr_gpio_remove, + .id_table = pisosr_gpio_id_table, +}; +module_spi_driver(pisosr_gpio_driver); + +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); +MODULE_DESCRIPTION("SPI Compatible PISO Shift Register GPIO Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c new file mode 100644 index 000000000..dc42571e6 --- /dev/null +++ b/drivers/gpio/gpio-pl061.c @@ -0,0 +1,430 @@ +/* + * Copyright (C) 2008, 2009 Provigent Ltd. + * + * Author: Baruch Siach <baruch@tkos.co.il> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Driver for the ARM PrimeCell(tm) General Purpose Input/Output (PL061) + * + * Data sheet: ARM DDI 0190B, September 2000 + */ +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/bitops.h> +#include <linux/gpio/driver.h> +#include <linux/device.h> +#include <linux/amba/bus.h> +#include <linux/slab.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pm.h> + +#define GPIODIR 0x400 +#define GPIOIS 0x404 +#define GPIOIBE 0x408 +#define GPIOIEV 0x40C +#define GPIOIE 0x410 +#define GPIORIS 0x414 +#define GPIOMIS 0x418 +#define GPIOIC 0x41C + +#define PL061_GPIO_NR 8 + +#ifdef CONFIG_PM +struct pl061_context_save_regs { + u8 gpio_data; + u8 gpio_dir; + u8 gpio_is; + u8 gpio_ibe; + u8 gpio_iev; + u8 gpio_ie; +}; +#endif + +struct pl061 { + raw_spinlock_t lock; + + void __iomem *base; + struct gpio_chip gc; + struct irq_chip irq_chip; + int parent_irq; + +#ifdef CONFIG_PM + struct pl061_context_save_regs csave_regs; +#endif +}; + +static int pl061_get_direction(struct gpio_chip *gc, unsigned offset) +{ + struct pl061 *pl061 = gpiochip_get_data(gc); + + return !(readb(pl061->base + GPIODIR) & BIT(offset)); +} + +static int pl061_direction_input(struct gpio_chip *gc, unsigned offset) +{ + struct pl061 *pl061 = gpiochip_get_data(gc); + unsigned long flags; + unsigned char gpiodir; + + raw_spin_lock_irqsave(&pl061->lock, flags); + gpiodir = readb(pl061->base + GPIODIR); + gpiodir &= ~(BIT(offset)); + writeb(gpiodir, pl061->base + GPIODIR); + raw_spin_unlock_irqrestore(&pl061->lock, flags); + + return 0; +} + +static int pl061_direction_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct pl061 *pl061 = gpiochip_get_data(gc); + unsigned long flags; + unsigned char gpiodir; + + raw_spin_lock_irqsave(&pl061->lock, flags); + writeb(!!value << offset, pl061->base + (BIT(offset + 2))); + gpiodir = readb(pl061->base + GPIODIR); + gpiodir |= BIT(offset); + writeb(gpiodir, pl061->base + GPIODIR); + + /* + * gpio value is set again, because pl061 doesn't allow to set value of + * a gpio pin before configuring it in OUT mode. + */ + writeb(!!value << offset, pl061->base + (BIT(offset + 2))); + raw_spin_unlock_irqrestore(&pl061->lock, flags); + + return 0; +} + +static int pl061_get_value(struct gpio_chip *gc, unsigned offset) +{ + struct pl061 *pl061 = gpiochip_get_data(gc); + + return !!readb(pl061->base + (BIT(offset + 2))); +} + +static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value) +{ + struct pl061 *pl061 = gpiochip_get_data(gc); + + writeb(!!value << offset, pl061->base + (BIT(offset + 2))); +} + +static int pl061_irq_type(struct irq_data *d, unsigned trigger) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct pl061 *pl061 = gpiochip_get_data(gc); + int offset = irqd_to_hwirq(d); + unsigned long flags; + u8 gpiois, gpioibe, gpioiev; + u8 bit = BIT(offset); + + if (offset < 0 || offset >= PL061_GPIO_NR) + return -EINVAL; + + if ((trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) && + (trigger & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))) + { + dev_err(gc->parent, + "trying to configure line %d for both level and edge " + "detection, choose one!\n", + offset); + return -EINVAL; + } + + + raw_spin_lock_irqsave(&pl061->lock, flags); + + gpioiev = readb(pl061->base + GPIOIEV); + gpiois = readb(pl061->base + GPIOIS); + gpioibe = readb(pl061->base + GPIOIBE); + + if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { + bool polarity = trigger & IRQ_TYPE_LEVEL_HIGH; + + /* Disable edge detection */ + gpioibe &= ~bit; + /* Enable level detection */ + gpiois |= bit; + /* Select polarity */ + if (polarity) + gpioiev |= bit; + else + gpioiev &= ~bit; + irq_set_handler_locked(d, handle_level_irq); + dev_dbg(gc->parent, "line %d: IRQ on %s level\n", + offset, + polarity ? "HIGH" : "LOW"); + } else if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { + /* Disable level detection */ + gpiois &= ~bit; + /* Select both edges, setting this makes GPIOEV be ignored */ + gpioibe |= bit; + irq_set_handler_locked(d, handle_edge_irq); + dev_dbg(gc->parent, "line %d: IRQ on both edges\n", offset); + } else if ((trigger & IRQ_TYPE_EDGE_RISING) || + (trigger & IRQ_TYPE_EDGE_FALLING)) { + bool rising = trigger & IRQ_TYPE_EDGE_RISING; + + /* Disable level detection */ + gpiois &= ~bit; + /* Clear detection on both edges */ + gpioibe &= ~bit; + /* Select edge */ + if (rising) + gpioiev |= bit; + else + gpioiev &= ~bit; + irq_set_handler_locked(d, handle_edge_irq); + dev_dbg(gc->parent, "line %d: IRQ on %s edge\n", + offset, + rising ? "RISING" : "FALLING"); + } else { + /* No trigger: disable everything */ + gpiois &= ~bit; + gpioibe &= ~bit; + gpioiev &= ~bit; + irq_set_handler_locked(d, handle_bad_irq); + dev_warn(gc->parent, "no trigger selected for line %d\n", + offset); + } + + writeb(gpiois, pl061->base + GPIOIS); + writeb(gpioibe, pl061->base + GPIOIBE); + writeb(gpioiev, pl061->base + GPIOIEV); + + raw_spin_unlock_irqrestore(&pl061->lock, flags); + + return 0; +} + +static void pl061_irq_handler(struct irq_desc *desc) +{ + unsigned long pending; + int offset; + struct gpio_chip *gc = irq_desc_get_handler_data(desc); + struct pl061 *pl061 = gpiochip_get_data(gc); + struct irq_chip *irqchip = irq_desc_get_chip(desc); + + chained_irq_enter(irqchip, desc); + + pending = readb(pl061->base + GPIOMIS); + if (pending) { + for_each_set_bit(offset, &pending, PL061_GPIO_NR) + generic_handle_irq(irq_find_mapping(gc->irq.domain, + offset)); + } + + chained_irq_exit(irqchip, desc); +} + +static void pl061_irq_mask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct pl061 *pl061 = gpiochip_get_data(gc); + u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR); + u8 gpioie; + + raw_spin_lock(&pl061->lock); + gpioie = readb(pl061->base + GPIOIE) & ~mask; + writeb(gpioie, pl061->base + GPIOIE); + raw_spin_unlock(&pl061->lock); +} + +static void pl061_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct pl061 *pl061 = gpiochip_get_data(gc); + u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR); + u8 gpioie; + + raw_spin_lock(&pl061->lock); + gpioie = readb(pl061->base + GPIOIE) | mask; + writeb(gpioie, pl061->base + GPIOIE); + raw_spin_unlock(&pl061->lock); +} + +/** + * pl061_irq_ack() - ACK an edge IRQ + * @d: IRQ data for this IRQ + * + * This gets called from the edge IRQ handler to ACK the edge IRQ + * in the GPIOIC (interrupt-clear) register. For level IRQs this is + * not needed: these go away when the level signal goes away. + */ +static void pl061_irq_ack(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct pl061 *pl061 = gpiochip_get_data(gc); + u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR); + + raw_spin_lock(&pl061->lock); + writeb(mask, pl061->base + GPIOIC); + raw_spin_unlock(&pl061->lock); +} + +static int pl061_irq_set_wake(struct irq_data *d, unsigned int state) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct pl061 *pl061 = gpiochip_get_data(gc); + + return irq_set_irq_wake(pl061->parent_irq, state); +} + +static int pl061_probe(struct amba_device *adev, const struct amba_id *id) +{ + struct device *dev = &adev->dev; + struct pl061 *pl061; + int ret, irq; + + pl061 = devm_kzalloc(dev, sizeof(*pl061), GFP_KERNEL); + if (pl061 == NULL) + return -ENOMEM; + + pl061->base = devm_ioremap_resource(dev, &adev->res); + if (IS_ERR(pl061->base)) + return PTR_ERR(pl061->base); + + raw_spin_lock_init(&pl061->lock); + if (of_property_read_bool(dev->of_node, "gpio-ranges")) { + pl061->gc.request = gpiochip_generic_request; + pl061->gc.free = gpiochip_generic_free; + } + + pl061->gc.base = -1; + pl061->gc.get_direction = pl061_get_direction; + pl061->gc.direction_input = pl061_direction_input; + pl061->gc.direction_output = pl061_direction_output; + pl061->gc.get = pl061_get_value; + pl061->gc.set = pl061_set_value; + pl061->gc.ngpio = PL061_GPIO_NR; + pl061->gc.label = dev_name(dev); + pl061->gc.parent = dev; + pl061->gc.owner = THIS_MODULE; + + ret = gpiochip_add_data(&pl061->gc, pl061); + if (ret) + return ret; + + /* + * irq_chip support + */ + pl061->irq_chip.name = dev_name(dev); + pl061->irq_chip.irq_ack = pl061_irq_ack; + pl061->irq_chip.irq_mask = pl061_irq_mask; + pl061->irq_chip.irq_unmask = pl061_irq_unmask; + pl061->irq_chip.irq_set_type = pl061_irq_type; + pl061->irq_chip.irq_set_wake = pl061_irq_set_wake; + + writeb(0, pl061->base + GPIOIE); /* disable irqs */ + irq = adev->irq[0]; + if (irq < 0) { + dev_err(&adev->dev, "invalid IRQ\n"); + return -ENODEV; + } + pl061->parent_irq = irq; + + ret = gpiochip_irqchip_add(&pl061->gc, &pl061->irq_chip, + 0, handle_bad_irq, + IRQ_TYPE_NONE); + if (ret) { + dev_info(&adev->dev, "could not add irqchip\n"); + return ret; + } + gpiochip_set_chained_irqchip(&pl061->gc, &pl061->irq_chip, + irq, pl061_irq_handler); + + amba_set_drvdata(adev, pl061); + dev_info(&adev->dev, "PL061 GPIO chip @%pa registered\n", + &adev->res.start); + + return 0; +} + +#ifdef CONFIG_PM +static int pl061_suspend(struct device *dev) +{ + struct pl061 *pl061 = dev_get_drvdata(dev); + int offset; + + pl061->csave_regs.gpio_data = 0; + pl061->csave_regs.gpio_dir = readb(pl061->base + GPIODIR); + pl061->csave_regs.gpio_is = readb(pl061->base + GPIOIS); + pl061->csave_regs.gpio_ibe = readb(pl061->base + GPIOIBE); + pl061->csave_regs.gpio_iev = readb(pl061->base + GPIOIEV); + pl061->csave_regs.gpio_ie = readb(pl061->base + GPIOIE); + + for (offset = 0; offset < PL061_GPIO_NR; offset++) { + if (pl061->csave_regs.gpio_dir & (BIT(offset))) + pl061->csave_regs.gpio_data |= + pl061_get_value(&pl061->gc, offset) << offset; + } + + return 0; +} + +static int pl061_resume(struct device *dev) +{ + struct pl061 *pl061 = dev_get_drvdata(dev); + int offset; + + for (offset = 0; offset < PL061_GPIO_NR; offset++) { + if (pl061->csave_regs.gpio_dir & (BIT(offset))) + pl061_direction_output(&pl061->gc, offset, + pl061->csave_regs.gpio_data & + (BIT(offset))); + else + pl061_direction_input(&pl061->gc, offset); + } + + writeb(pl061->csave_regs.gpio_is, pl061->base + GPIOIS); + writeb(pl061->csave_regs.gpio_ibe, pl061->base + GPIOIBE); + writeb(pl061->csave_regs.gpio_iev, pl061->base + GPIOIEV); + writeb(pl061->csave_regs.gpio_ie, pl061->base + GPIOIE); + + return 0; +} + +static const struct dev_pm_ops pl061_dev_pm_ops = { + .suspend = pl061_suspend, + .resume = pl061_resume, + .freeze = pl061_suspend, + .restore = pl061_resume, +}; +#endif + +static const struct amba_id pl061_ids[] = { + { + .id = 0x00041061, + .mask = 0x000fffff, + }, + { 0, 0 }, +}; + +static struct amba_driver pl061_gpio_driver = { + .drv = { + .name = "pl061_gpio", +#ifdef CONFIG_PM + .pm = &pl061_dev_pm_ops, +#endif + }, + .id_table = pl061_ids, + .probe = pl061_probe, +}; + +static int __init pl061_gpio_init(void) +{ + return amba_driver_register(&pl061_gpio_driver); +} +device_initcall(pl061_gpio_init); diff --git a/drivers/gpio/gpio-pmic-eic-sprd.c b/drivers/gpio/gpio-pmic-eic-sprd.c new file mode 100644 index 000000000..29e044ff4 --- /dev/null +++ b/drivers/gpio/gpio-pmic-eic-sprd.c @@ -0,0 +1,384 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Spreadtrum Communications Inc. + * Copyright (C) 2018 Linaro Ltd. + */ + +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* EIC registers definition */ +#define SPRD_PMIC_EIC_DATA 0x0 +#define SPRD_PMIC_EIC_DMSK 0x4 +#define SPRD_PMIC_EIC_IEV 0x14 +#define SPRD_PMIC_EIC_IE 0x18 +#define SPRD_PMIC_EIC_RIS 0x1c +#define SPRD_PMIC_EIC_MIS 0x20 +#define SPRD_PMIC_EIC_IC 0x24 +#define SPRD_PMIC_EIC_TRIG 0x28 +#define SPRD_PMIC_EIC_CTRL0 0x40 + +/* + * The PMIC EIC controller only has one bank, and each bank now can contain + * 16 EICs. + */ +#define SPRD_PMIC_EIC_PER_BANK_NR 16 +#define SPRD_PMIC_EIC_NR SPRD_PMIC_EIC_PER_BANK_NR +#define SPRD_PMIC_EIC_DATA_MASK GENMASK(15, 0) +#define SPRD_PMIC_EIC_BIT(x) ((x) & (SPRD_PMIC_EIC_PER_BANK_NR - 1)) +#define SPRD_PMIC_EIC_DBNC_MASK GENMASK(11, 0) + +/* + * These registers are modified under the irq bus lock and cached to avoid + * unnecessary writes in bus_sync_unlock. + */ +enum { + REG_IEV, + REG_IE, + REG_TRIG, + CACHE_NR_REGS +}; + +/** + * struct sprd_pmic_eic - PMIC EIC controller + * @chip: the gpio_chip structure. + * @intc: the irq_chip structure. + * @regmap: the regmap from the parent device. + * @offset: the EIC controller's offset address of the PMIC. + * @reg: the array to cache the EIC registers. + * @buslock: for bus lock/sync and unlock. + * @irq: the interrupt number of the PMIC EIC conteroller. + */ +struct sprd_pmic_eic { + struct gpio_chip chip; + struct irq_chip intc; + struct regmap *map; + u32 offset; + u8 reg[CACHE_NR_REGS]; + struct mutex buslock; + int irq; +}; + +static void sprd_pmic_eic_update(struct gpio_chip *chip, unsigned int offset, + u16 reg, unsigned int val) +{ + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + u32 shift = SPRD_PMIC_EIC_BIT(offset); + + regmap_update_bits(pmic_eic->map, pmic_eic->offset + reg, + BIT(shift), val << shift); +} + +static int sprd_pmic_eic_read(struct gpio_chip *chip, unsigned int offset, + u16 reg) +{ + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + u32 value; + int ret; + + ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value); + if (ret) + return ret; + + return !!(value & BIT(SPRD_PMIC_EIC_BIT(offset))); +} + +static int sprd_pmic_eic_request(struct gpio_chip *chip, unsigned int offset) +{ + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 1); + return 0; +} + +static void sprd_pmic_eic_free(struct gpio_chip *chip, unsigned int offset) +{ + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 0); +} + +static int sprd_pmic_eic_get(struct gpio_chip *chip, unsigned int offset) +{ + return sprd_pmic_eic_read(chip, offset, SPRD_PMIC_EIC_DATA); +} + +static int sprd_pmic_eic_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + /* EICs are always input, nothing need to do here. */ + return 0; +} + +static void sprd_pmic_eic_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + /* EICs are always input, nothing need to do here. */ +} + +static int sprd_pmic_eic_set_debounce(struct gpio_chip *chip, + unsigned int offset, + unsigned int debounce) +{ + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + u32 reg, value; + int ret; + + reg = SPRD_PMIC_EIC_CTRL0 + SPRD_PMIC_EIC_BIT(offset) * 0x4; + ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value); + if (ret) + return ret; + + value &= ~SPRD_PMIC_EIC_DBNC_MASK; + value |= (debounce / 1000) & SPRD_PMIC_EIC_DBNC_MASK; + return regmap_write(pmic_eic->map, pmic_eic->offset + reg, value); +} + +static int sprd_pmic_eic_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + unsigned long param = pinconf_to_config_param(config); + u32 arg = pinconf_to_config_argument(config); + + if (param == PIN_CONFIG_INPUT_DEBOUNCE) + return sprd_pmic_eic_set_debounce(chip, offset, arg); + + return -ENOTSUPP; +} + +static void sprd_pmic_eic_irq_mask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + + pmic_eic->reg[REG_IE] = 0; + pmic_eic->reg[REG_TRIG] = 0; +} + +static void sprd_pmic_eic_irq_unmask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + + pmic_eic->reg[REG_IE] = 1; + pmic_eic->reg[REG_TRIG] = 1; +} + +static int sprd_pmic_eic_irq_set_type(struct irq_data *data, + unsigned int flow_type) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + + switch (flow_type) { + case IRQ_TYPE_LEVEL_HIGH: + pmic_eic->reg[REG_IEV] = 1; + break; + case IRQ_TYPE_LEVEL_LOW: + pmic_eic->reg[REG_IEV] = 0; + break; + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_BOTH: + /* + * Will set the trigger level according to current EIC level + * in irq_bus_sync_unlock() interface, so here nothing to do. + */ + break; + default: + return -ENOTSUPP; + } + + return 0; +} + +static void sprd_pmic_eic_bus_lock(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + + mutex_lock(&pmic_eic->buslock); +} + +static void sprd_pmic_eic_bus_sync_unlock(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + u32 trigger = irqd_get_trigger_type(data); + u32 offset = irqd_to_hwirq(data); + int state; + + /* Set irq type */ + if (trigger & IRQ_TYPE_EDGE_BOTH) { + state = sprd_pmic_eic_get(chip, offset); + if (state) + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0); + else + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1); + } else { + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, + pmic_eic->reg[REG_IEV]); + } + + /* Set irq unmask */ + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE, + pmic_eic->reg[REG_IE]); + /* Generate trigger start pulse for debounce EIC */ + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG, + pmic_eic->reg[REG_TRIG]); + + mutex_unlock(&pmic_eic->buslock); +} + +static void sprd_pmic_eic_toggle_trigger(struct gpio_chip *chip, + unsigned int irq, unsigned int offset) +{ + u32 trigger = irq_get_trigger_type(irq); + int state, post_state; + + if (!(trigger & IRQ_TYPE_EDGE_BOTH)) + return; + + state = sprd_pmic_eic_get(chip, offset); +retry: + if (state) + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0); + else + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1); + + post_state = sprd_pmic_eic_get(chip, offset); + if (state != post_state) { + dev_warn(chip->parent, "PMIC EIC level was changed.\n"); + state = post_state; + goto retry; + } + + /* Set irq unmask */ + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE, 1); + /* Generate trigger start pulse for debounce EIC */ + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG, 1); +} + +static irqreturn_t sprd_pmic_eic_irq_handler(int irq, void *data) +{ + struct sprd_pmic_eic *pmic_eic = data; + struct gpio_chip *chip = &pmic_eic->chip; + unsigned long status; + u32 n, girq, val; + int ret; + + ret = regmap_read(pmic_eic->map, pmic_eic->offset + SPRD_PMIC_EIC_MIS, + &val); + if (ret) + return IRQ_RETVAL(ret); + + status = val & SPRD_PMIC_EIC_DATA_MASK; + + for_each_set_bit(n, &status, chip->ngpio) { + /* Clear the interrupt */ + sprd_pmic_eic_update(chip, n, SPRD_PMIC_EIC_IC, 1); + + girq = irq_find_mapping(chip->irq.domain, n); + handle_nested_irq(girq); + + /* + * The PMIC EIC can only support level trigger, so we can + * toggle the level trigger to emulate the edge trigger. + */ + sprd_pmic_eic_toggle_trigger(chip, girq, n); + } + + return IRQ_HANDLED; +} + +static int sprd_pmic_eic_probe(struct platform_device *pdev) +{ + struct gpio_irq_chip *irq; + struct sprd_pmic_eic *pmic_eic; + int ret; + + pmic_eic = devm_kzalloc(&pdev->dev, sizeof(*pmic_eic), GFP_KERNEL); + if (!pmic_eic) + return -ENOMEM; + + mutex_init(&pmic_eic->buslock); + + pmic_eic->irq = platform_get_irq(pdev, 0); + if (pmic_eic->irq < 0) { + dev_err(&pdev->dev, "Failed to get PMIC EIC interrupt.\n"); + return pmic_eic->irq; + } + + pmic_eic->map = dev_get_regmap(pdev->dev.parent, NULL); + if (!pmic_eic->map) + return -ENODEV; + + ret = of_property_read_u32(pdev->dev.of_node, "reg", &pmic_eic->offset); + if (ret) { + dev_err(&pdev->dev, "Failed to get PMIC EIC base address.\n"); + return ret; + } + + ret = devm_request_threaded_irq(&pdev->dev, pmic_eic->irq, NULL, + sprd_pmic_eic_irq_handler, + IRQF_TRIGGER_LOW | + IRQF_ONESHOT | IRQF_NO_SUSPEND, + dev_name(&pdev->dev), pmic_eic); + if (ret) { + dev_err(&pdev->dev, "Failed to request PMIC EIC IRQ.\n"); + return ret; + } + + pmic_eic->chip.label = dev_name(&pdev->dev); + pmic_eic->chip.ngpio = SPRD_PMIC_EIC_NR; + pmic_eic->chip.base = -1; + pmic_eic->chip.parent = &pdev->dev; + pmic_eic->chip.of_node = pdev->dev.of_node; + pmic_eic->chip.direction_input = sprd_pmic_eic_direction_input; + pmic_eic->chip.request = sprd_pmic_eic_request; + pmic_eic->chip.free = sprd_pmic_eic_free; + pmic_eic->chip.set_config = sprd_pmic_eic_set_config; + pmic_eic->chip.set = sprd_pmic_eic_set; + pmic_eic->chip.get = sprd_pmic_eic_get; + + pmic_eic->intc.name = dev_name(&pdev->dev); + pmic_eic->intc.irq_mask = sprd_pmic_eic_irq_mask; + pmic_eic->intc.irq_unmask = sprd_pmic_eic_irq_unmask; + pmic_eic->intc.irq_set_type = sprd_pmic_eic_irq_set_type; + pmic_eic->intc.irq_bus_lock = sprd_pmic_eic_bus_lock; + pmic_eic->intc.irq_bus_sync_unlock = sprd_pmic_eic_bus_sync_unlock; + pmic_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE; + + irq = &pmic_eic->chip.irq; + irq->chip = &pmic_eic->intc; + irq->threaded = true; + + ret = devm_gpiochip_add_data(&pdev->dev, &pmic_eic->chip, pmic_eic); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret); + return ret; + } + + platform_set_drvdata(pdev, pmic_eic); + return 0; +} + +static const struct of_device_id sprd_pmic_eic_of_match[] = { + { .compatible = "sprd,sc27xx-eic", }, + { /* end of list */ } +}; +MODULE_DEVICE_TABLE(of, sprd_pmic_eic_of_match); + +static struct platform_driver sprd_pmic_eic_driver = { + .probe = sprd_pmic_eic_probe, + .driver = { + .name = "sprd-pmic-eic", + .of_match_table = sprd_pmic_eic_of_match, + }, +}; + +module_platform_driver(sprd_pmic_eic_driver); + +MODULE_DESCRIPTION("Spreadtrum PMIC EIC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c new file mode 100644 index 000000000..bcc6be4a5 --- /dev/null +++ b/drivers/gpio/gpio-pxa.c @@ -0,0 +1,829 @@ +/* + * linux/arch/arm/plat-pxa/gpio.c + * + * Generic PXA GPIO handling + * + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/gpio-pxa.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/syscore_ops.h> +#include <linux/slab.h> + +/* + * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with + * one set of registers. The register offsets are organized below: + * + * GPLR GPDR GPSR GPCR GRER GFER GEDR + * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 + * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C + * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 + * + * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 + * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C + * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 + * + * BANK 6 - 0x0200 0x020C 0x0218 0x0224 0x0230 0x023C 0x0248 + * + * NOTE: + * BANK 3 is only available on PXA27x and later processors. + * BANK 4 and 5 are only available on PXA935, PXA1928 + * BANK 6 is only available on PXA1928 + */ + +#define GPLR_OFFSET 0x00 +#define GPDR_OFFSET 0x0C +#define GPSR_OFFSET 0x18 +#define GPCR_OFFSET 0x24 +#define GRER_OFFSET 0x30 +#define GFER_OFFSET 0x3C +#define GEDR_OFFSET 0x48 +#define GAFR_OFFSET 0x54 +#define ED_MASK_OFFSET 0x9C /* GPIO edge detection for AP side */ + +#define BANK_OFF(n) (((n) / 3) << 8) + (((n) % 3) << 2) + +int pxa_last_gpio; +static int irq_base; + +struct pxa_gpio_bank { + void __iomem *regbase; + unsigned long irq_mask; + unsigned long irq_edge_rise; + unsigned long irq_edge_fall; + +#ifdef CONFIG_PM + unsigned long saved_gplr; + unsigned long saved_gpdr; + unsigned long saved_grer; + unsigned long saved_gfer; +#endif +}; + +struct pxa_gpio_chip { + struct device *dev; + struct gpio_chip chip; + struct pxa_gpio_bank *banks; + struct irq_domain *irqdomain; + + int irq0; + int irq1; + int (*set_wake)(unsigned int gpio, unsigned int on); +}; + +enum pxa_gpio_type { + PXA25X_GPIO = 0, + PXA26X_GPIO, + PXA27X_GPIO, + PXA3XX_GPIO, + PXA93X_GPIO, + MMP_GPIO = 0x10, + MMP2_GPIO, + PXA1928_GPIO, +}; + +struct pxa_gpio_id { + enum pxa_gpio_type type; + int gpio_nums; +}; + +static DEFINE_SPINLOCK(gpio_lock); +static struct pxa_gpio_chip *pxa_gpio_chip; +static enum pxa_gpio_type gpio_type; + +static struct pxa_gpio_id pxa25x_id = { + .type = PXA25X_GPIO, + .gpio_nums = 85, +}; + +static struct pxa_gpio_id pxa26x_id = { + .type = PXA26X_GPIO, + .gpio_nums = 90, +}; + +static struct pxa_gpio_id pxa27x_id = { + .type = PXA27X_GPIO, + .gpio_nums = 121, +}; + +static struct pxa_gpio_id pxa3xx_id = { + .type = PXA3XX_GPIO, + .gpio_nums = 128, +}; + +static struct pxa_gpio_id pxa93x_id = { + .type = PXA93X_GPIO, + .gpio_nums = 192, +}; + +static struct pxa_gpio_id mmp_id = { + .type = MMP_GPIO, + .gpio_nums = 128, +}; + +static struct pxa_gpio_id mmp2_id = { + .type = MMP2_GPIO, + .gpio_nums = 192, +}; + +static struct pxa_gpio_id pxa1928_id = { + .type = PXA1928_GPIO, + .gpio_nums = 224, +}; + +#define for_each_gpio_bank(i, b, pc) \ + for (i = 0, b = pc->banks; i <= pxa_last_gpio; i += 32, b++) + +static inline struct pxa_gpio_chip *chip_to_pxachip(struct gpio_chip *c) +{ + struct pxa_gpio_chip *pxa_chip = gpiochip_get_data(c); + + return pxa_chip; +} + +static inline void __iomem *gpio_bank_base(struct gpio_chip *c, int gpio) +{ + struct pxa_gpio_chip *p = gpiochip_get_data(c); + struct pxa_gpio_bank *bank = p->banks + (gpio / 32); + + return bank->regbase; +} + +static inline struct pxa_gpio_bank *gpio_to_pxabank(struct gpio_chip *c, + unsigned gpio) +{ + return chip_to_pxachip(c)->banks + gpio / 32; +} + +static inline int gpio_is_pxa_type(int type) +{ + return (type & MMP_GPIO) == 0; +} + +static inline int gpio_is_mmp_type(int type) +{ + return (type & MMP_GPIO) != 0; +} + +/* GPIO86/87/88/89 on PXA26x have their direction bits in PXA_GPDR(2 inverted, + * as well as their Alternate Function value being '1' for GPIO in GAFRx. + */ +static inline int __gpio_is_inverted(int gpio) +{ + if ((gpio_type == PXA26X_GPIO) && (gpio > 85)) + return 1; + return 0; +} + +/* + * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate + * function of a GPIO, and GPDRx cannot be altered once configured. It + * is attributed as "occupied" here (I know this terminology isn't + * accurate, you are welcome to propose a better one :-) + */ +static inline int __gpio_is_occupied(struct pxa_gpio_chip *pchip, unsigned gpio) +{ + void __iomem *base; + unsigned long gafr = 0, gpdr = 0; + int ret, af = 0, dir = 0; + + base = gpio_bank_base(&pchip->chip, gpio); + gpdr = readl_relaxed(base + GPDR_OFFSET); + + switch (gpio_type) { + case PXA25X_GPIO: + case PXA26X_GPIO: + case PXA27X_GPIO: + gafr = readl_relaxed(base + GAFR_OFFSET); + af = (gafr >> ((gpio & 0xf) * 2)) & 0x3; + dir = gpdr & GPIO_bit(gpio); + + if (__gpio_is_inverted(gpio)) + ret = (af != 1) || (dir == 0); + else + ret = (af != 0) || (dir != 0); + break; + default: + ret = gpdr & GPIO_bit(gpio); + break; + } + return ret; +} + +int pxa_irq_to_gpio(int irq) +{ + struct pxa_gpio_chip *pchip = pxa_gpio_chip; + int irq_gpio0; + + irq_gpio0 = irq_find_mapping(pchip->irqdomain, 0); + if (irq_gpio0 > 0) + return irq - irq_gpio0; + + return irq_gpio0; +} + +static bool pxa_gpio_has_pinctrl(void) +{ + switch (gpio_type) { + case PXA3XX_GPIO: + case MMP2_GPIO: + return false; + + default: + return true; + } +} + +static int pxa_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct pxa_gpio_chip *pchip = chip_to_pxachip(chip); + + return irq_find_mapping(pchip->irqdomain, offset); +} + +static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + void __iomem *base = gpio_bank_base(chip, offset); + uint32_t value, mask = GPIO_bit(offset); + unsigned long flags; + int ret; + + if (pxa_gpio_has_pinctrl()) { + ret = pinctrl_gpio_direction_input(chip->base + offset); + if (ret) + return ret; + } + + spin_lock_irqsave(&gpio_lock, flags); + + value = readl_relaxed(base + GPDR_OFFSET); + if (__gpio_is_inverted(chip->base + offset)) + value |= mask; + else + value &= ~mask; + writel_relaxed(value, base + GPDR_OFFSET); + + spin_unlock_irqrestore(&gpio_lock, flags); + return 0; +} + +static int pxa_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + void __iomem *base = gpio_bank_base(chip, offset); + uint32_t tmp, mask = GPIO_bit(offset); + unsigned long flags; + int ret; + + writel_relaxed(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET)); + + if (pxa_gpio_has_pinctrl()) { + ret = pinctrl_gpio_direction_output(chip->base + offset); + if (ret) + return ret; + } + + spin_lock_irqsave(&gpio_lock, flags); + + tmp = readl_relaxed(base + GPDR_OFFSET); + if (__gpio_is_inverted(chip->base + offset)) + tmp &= ~mask; + else + tmp |= mask; + writel_relaxed(tmp, base + GPDR_OFFSET); + + spin_unlock_irqrestore(&gpio_lock, flags); + return 0; +} + +static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + void __iomem *base = gpio_bank_base(chip, offset); + u32 gplr = readl_relaxed(base + GPLR_OFFSET); + + return !!(gplr & GPIO_bit(offset)); +} + +static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + void __iomem *base = gpio_bank_base(chip, offset); + + writel_relaxed(GPIO_bit(offset), + base + (value ? GPSR_OFFSET : GPCR_OFFSET)); +} + +#ifdef CONFIG_OF_GPIO +static int pxa_gpio_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, + u32 *flags) +{ + if (gpiospec->args[0] > pxa_last_gpio) + return -EINVAL; + + if (flags) + *flags = gpiospec->args[1]; + + return gpiospec->args[0]; +} +#endif + +static int pxa_init_gpio_chip(struct pxa_gpio_chip *pchip, int ngpio, + struct device_node *np, void __iomem *regbase) +{ + int i, gpio, nbanks = DIV_ROUND_UP(ngpio, 32); + struct pxa_gpio_bank *bank; + + pchip->banks = devm_kcalloc(pchip->dev, nbanks, sizeof(*pchip->banks), + GFP_KERNEL); + if (!pchip->banks) + return -ENOMEM; + + pchip->chip.label = "gpio-pxa"; + pchip->chip.direction_input = pxa_gpio_direction_input; + pchip->chip.direction_output = pxa_gpio_direction_output; + pchip->chip.get = pxa_gpio_get; + pchip->chip.set = pxa_gpio_set; + pchip->chip.to_irq = pxa_gpio_to_irq; + pchip->chip.ngpio = ngpio; + + if (pxa_gpio_has_pinctrl()) { + pchip->chip.request = gpiochip_generic_request; + pchip->chip.free = gpiochip_generic_free; + } + +#ifdef CONFIG_OF_GPIO + pchip->chip.of_node = np; + pchip->chip.of_xlate = pxa_gpio_of_xlate; + pchip->chip.of_gpio_n_cells = 2; +#endif + + for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { + bank = pchip->banks + i; + bank->regbase = regbase + BANK_OFF(i); + } + + return gpiochip_add_data(&pchip->chip, pchip); +} + +/* Update only those GRERx and GFERx edge detection register bits if those + * bits are set in c->irq_mask + */ +static inline void update_edge_detect(struct pxa_gpio_bank *c) +{ + uint32_t grer, gfer; + + grer = readl_relaxed(c->regbase + GRER_OFFSET) & ~c->irq_mask; + gfer = readl_relaxed(c->regbase + GFER_OFFSET) & ~c->irq_mask; + grer |= c->irq_edge_rise & c->irq_mask; + gfer |= c->irq_edge_fall & c->irq_mask; + writel_relaxed(grer, c->regbase + GRER_OFFSET); + writel_relaxed(gfer, c->regbase + GFER_OFFSET); +} + +static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type) +{ + struct pxa_gpio_chip *pchip = irq_data_get_irq_chip_data(d); + unsigned int gpio = irqd_to_hwirq(d); + struct pxa_gpio_bank *c = gpio_to_pxabank(&pchip->chip, gpio); + unsigned long gpdr, mask = GPIO_bit(gpio); + + if (type == IRQ_TYPE_PROBE) { + /* Don't mess with enabled GPIOs using preconfigured edges or + * GPIOs set to alternate function or to output during probe + */ + if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio)) + return 0; + + if (__gpio_is_occupied(pchip, gpio)) + return 0; + + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + } + + gpdr = readl_relaxed(c->regbase + GPDR_OFFSET); + + if (__gpio_is_inverted(gpio)) + writel_relaxed(gpdr | mask, c->regbase + GPDR_OFFSET); + else + writel_relaxed(gpdr & ~mask, c->regbase + GPDR_OFFSET); + + if (type & IRQ_TYPE_EDGE_RISING) + c->irq_edge_rise |= mask; + else + c->irq_edge_rise &= ~mask; + + if (type & IRQ_TYPE_EDGE_FALLING) + c->irq_edge_fall |= mask; + else + c->irq_edge_fall &= ~mask; + + update_edge_detect(c); + + pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, d->irq, gpio, + ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), + ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : "")); + return 0; +} + +static irqreturn_t pxa_gpio_demux_handler(int in_irq, void *d) +{ + int loop, gpio, n, handled = 0; + unsigned long gedr; + struct pxa_gpio_chip *pchip = d; + struct pxa_gpio_bank *c; + + do { + loop = 0; + for_each_gpio_bank(gpio, c, pchip) { + gedr = readl_relaxed(c->regbase + GEDR_OFFSET); + gedr = gedr & c->irq_mask; + writel_relaxed(gedr, c->regbase + GEDR_OFFSET); + + for_each_set_bit(n, &gedr, BITS_PER_LONG) { + loop = 1; + + generic_handle_irq( + irq_find_mapping(pchip->irqdomain, + gpio + n)); + } + } + handled += loop; + } while (loop); + + return handled ? IRQ_HANDLED : IRQ_NONE; +} + +static irqreturn_t pxa_gpio_direct_handler(int in_irq, void *d) +{ + struct pxa_gpio_chip *pchip = d; + + if (in_irq == pchip->irq0) { + generic_handle_irq(irq_find_mapping(pchip->irqdomain, 0)); + } else if (in_irq == pchip->irq1) { + generic_handle_irq(irq_find_mapping(pchip->irqdomain, 1)); + } else { + pr_err("%s() unknown irq %d\n", __func__, in_irq); + return IRQ_NONE; + } + return IRQ_HANDLED; +} + +static void pxa_ack_muxed_gpio(struct irq_data *d) +{ + struct pxa_gpio_chip *pchip = irq_data_get_irq_chip_data(d); + unsigned int gpio = irqd_to_hwirq(d); + void __iomem *base = gpio_bank_base(&pchip->chip, gpio); + + writel_relaxed(GPIO_bit(gpio), base + GEDR_OFFSET); +} + +static void pxa_mask_muxed_gpio(struct irq_data *d) +{ + struct pxa_gpio_chip *pchip = irq_data_get_irq_chip_data(d); + unsigned int gpio = irqd_to_hwirq(d); + struct pxa_gpio_bank *b = gpio_to_pxabank(&pchip->chip, gpio); + void __iomem *base = gpio_bank_base(&pchip->chip, gpio); + uint32_t grer, gfer; + + b->irq_mask &= ~GPIO_bit(gpio); + + grer = readl_relaxed(base + GRER_OFFSET) & ~GPIO_bit(gpio); + gfer = readl_relaxed(base + GFER_OFFSET) & ~GPIO_bit(gpio); + writel_relaxed(grer, base + GRER_OFFSET); + writel_relaxed(gfer, base + GFER_OFFSET); +} + +static int pxa_gpio_set_wake(struct irq_data *d, unsigned int on) +{ + struct pxa_gpio_chip *pchip = irq_data_get_irq_chip_data(d); + unsigned int gpio = irqd_to_hwirq(d); + + if (pchip->set_wake) + return pchip->set_wake(gpio, on); + else + return 0; +} + +static void pxa_unmask_muxed_gpio(struct irq_data *d) +{ + struct pxa_gpio_chip *pchip = irq_data_get_irq_chip_data(d); + unsigned int gpio = irqd_to_hwirq(d); + struct pxa_gpio_bank *c = gpio_to_pxabank(&pchip->chip, gpio); + + c->irq_mask |= GPIO_bit(gpio); + update_edge_detect(c); +} + +static struct irq_chip pxa_muxed_gpio_chip = { + .name = "GPIO", + .irq_ack = pxa_ack_muxed_gpio, + .irq_mask = pxa_mask_muxed_gpio, + .irq_unmask = pxa_unmask_muxed_gpio, + .irq_set_type = pxa_gpio_irq_type, + .irq_set_wake = pxa_gpio_set_wake, +}; + +static int pxa_gpio_nums(struct platform_device *pdev) +{ + const struct platform_device_id *id = platform_get_device_id(pdev); + struct pxa_gpio_id *pxa_id = (struct pxa_gpio_id *)id->driver_data; + int count = 0; + + switch (pxa_id->type) { + case PXA25X_GPIO: + case PXA26X_GPIO: + case PXA27X_GPIO: + case PXA3XX_GPIO: + case PXA93X_GPIO: + case MMP_GPIO: + case MMP2_GPIO: + case PXA1928_GPIO: + gpio_type = pxa_id->type; + count = pxa_id->gpio_nums - 1; + break; + default: + count = -EINVAL; + break; + } + return count; +} + +static int pxa_irq_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip, + handle_edge_irq); + irq_set_chip_data(irq, d->host_data); + irq_set_noprobe(irq); + return 0; +} + +const struct irq_domain_ops pxa_irq_domain_ops = { + .map = pxa_irq_domain_map, + .xlate = irq_domain_xlate_twocell, +}; + +#ifdef CONFIG_OF +static const struct of_device_id pxa_gpio_dt_ids[] = { + { .compatible = "intel,pxa25x-gpio", .data = &pxa25x_id, }, + { .compatible = "intel,pxa26x-gpio", .data = &pxa26x_id, }, + { .compatible = "intel,pxa27x-gpio", .data = &pxa27x_id, }, + { .compatible = "intel,pxa3xx-gpio", .data = &pxa3xx_id, }, + { .compatible = "marvell,pxa93x-gpio", .data = &pxa93x_id, }, + { .compatible = "marvell,mmp-gpio", .data = &mmp_id, }, + { .compatible = "marvell,mmp2-gpio", .data = &mmp2_id, }, + { .compatible = "marvell,pxa1928-gpio", .data = &pxa1928_id, }, + {} +}; + +static int pxa_gpio_probe_dt(struct platform_device *pdev, + struct pxa_gpio_chip *pchip) +{ + int nr_gpios; + const struct pxa_gpio_id *gpio_id; + + gpio_id = of_device_get_match_data(&pdev->dev); + gpio_type = gpio_id->type; + + nr_gpios = gpio_id->gpio_nums; + pxa_last_gpio = nr_gpios - 1; + + irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, nr_gpios, 0); + if (irq_base < 0) { + dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n"); + return irq_base; + } + return irq_base; +} +#else +#define pxa_gpio_probe_dt(pdev, pchip) (-1) +#endif + +static int pxa_gpio_probe(struct platform_device *pdev) +{ + struct pxa_gpio_chip *pchip; + struct pxa_gpio_bank *c; + struct resource *res; + struct clk *clk; + struct pxa_gpio_platform_data *info; + void __iomem *gpio_reg_base; + int gpio, ret; + int irq0 = 0, irq1 = 0, irq_mux; + + pchip = devm_kzalloc(&pdev->dev, sizeof(*pchip), GFP_KERNEL); + if (!pchip) + return -ENOMEM; + pchip->dev = &pdev->dev; + + info = dev_get_platdata(&pdev->dev); + if (info) { + irq_base = info->irq_base; + if (irq_base <= 0) + return -EINVAL; + pxa_last_gpio = pxa_gpio_nums(pdev); + pchip->set_wake = info->gpio_set_wake; + } else { + irq_base = pxa_gpio_probe_dt(pdev, pchip); + if (irq_base < 0) + return -EINVAL; + } + + if (!pxa_last_gpio) + return -EINVAL; + + pchip->irqdomain = irq_domain_add_legacy(pdev->dev.of_node, + pxa_last_gpio + 1, irq_base, + 0, &pxa_irq_domain_ops, pchip); + if (!pchip->irqdomain) + return -ENOMEM; + + irq0 = platform_get_irq_byname(pdev, "gpio0"); + irq1 = platform_get_irq_byname(pdev, "gpio1"); + irq_mux = platform_get_irq_byname(pdev, "gpio_mux"); + if ((irq0 > 0 && irq1 <= 0) || (irq0 <= 0 && irq1 > 0) + || (irq_mux <= 0)) + return -EINVAL; + + pchip->irq0 = irq0; + pchip->irq1 = irq1; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + gpio_reg_base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!gpio_reg_base) + return -EINVAL; + + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Error %ld to get gpio clock\n", + PTR_ERR(clk)); + return PTR_ERR(clk); + } + ret = clk_prepare_enable(clk); + if (ret) { + clk_put(clk); + return ret; + } + + /* Initialize GPIO chips */ + ret = pxa_init_gpio_chip(pchip, pxa_last_gpio + 1, pdev->dev.of_node, + gpio_reg_base); + if (ret) { + clk_put(clk); + return ret; + } + + /* clear all GPIO edge detects */ + for_each_gpio_bank(gpio, c, pchip) { + writel_relaxed(0, c->regbase + GFER_OFFSET); + writel_relaxed(0, c->regbase + GRER_OFFSET); + writel_relaxed(~0, c->regbase + GEDR_OFFSET); + /* unmask GPIO edge detect for AP side */ + if (gpio_is_mmp_type(gpio_type)) + writel_relaxed(~0, c->regbase + ED_MASK_OFFSET); + } + + if (irq0 > 0) { + ret = devm_request_irq(&pdev->dev, + irq0, pxa_gpio_direct_handler, 0, + "gpio-0", pchip); + if (ret) + dev_err(&pdev->dev, "request of gpio0 irq failed: %d\n", + ret); + } + if (irq1 > 0) { + ret = devm_request_irq(&pdev->dev, + irq1, pxa_gpio_direct_handler, 0, + "gpio-1", pchip); + if (ret) + dev_err(&pdev->dev, "request of gpio1 irq failed: %d\n", + ret); + } + ret = devm_request_irq(&pdev->dev, + irq_mux, pxa_gpio_demux_handler, 0, + "gpio-mux", pchip); + if (ret) + dev_err(&pdev->dev, "request of gpio-mux irq failed: %d\n", + ret); + + pxa_gpio_chip = pchip; + + return 0; +} + +static const struct platform_device_id gpio_id_table[] = { + { "pxa25x-gpio", (unsigned long)&pxa25x_id }, + { "pxa26x-gpio", (unsigned long)&pxa26x_id }, + { "pxa27x-gpio", (unsigned long)&pxa27x_id }, + { "pxa3xx-gpio", (unsigned long)&pxa3xx_id }, + { "pxa93x-gpio", (unsigned long)&pxa93x_id }, + { "mmp-gpio", (unsigned long)&mmp_id }, + { "mmp2-gpio", (unsigned long)&mmp2_id }, + { "pxa1928-gpio", (unsigned long)&pxa1928_id }, + { }, +}; + +static struct platform_driver pxa_gpio_driver = { + .probe = pxa_gpio_probe, + .driver = { + .name = "pxa-gpio", + .of_match_table = of_match_ptr(pxa_gpio_dt_ids), + }, + .id_table = gpio_id_table, +}; + +static int __init pxa_gpio_legacy_init(void) +{ + if (of_have_populated_dt()) + return 0; + + return platform_driver_register(&pxa_gpio_driver); +} +postcore_initcall(pxa_gpio_legacy_init); + +static int __init pxa_gpio_dt_init(void) +{ + if (of_have_populated_dt()) + return platform_driver_register(&pxa_gpio_driver); + + return 0; +} +device_initcall(pxa_gpio_dt_init); + +#ifdef CONFIG_PM +static int pxa_gpio_suspend(void) +{ + struct pxa_gpio_chip *pchip = pxa_gpio_chip; + struct pxa_gpio_bank *c; + int gpio; + + if (!pchip) + return 0; + + for_each_gpio_bank(gpio, c, pchip) { + c->saved_gplr = readl_relaxed(c->regbase + GPLR_OFFSET); + c->saved_gpdr = readl_relaxed(c->regbase + GPDR_OFFSET); + c->saved_grer = readl_relaxed(c->regbase + GRER_OFFSET); + c->saved_gfer = readl_relaxed(c->regbase + GFER_OFFSET); + + /* Clear GPIO transition detect bits */ + writel_relaxed(0xffffffff, c->regbase + GEDR_OFFSET); + } + return 0; +} + +static void pxa_gpio_resume(void) +{ + struct pxa_gpio_chip *pchip = pxa_gpio_chip; + struct pxa_gpio_bank *c; + int gpio; + + if (!pchip) + return; + + for_each_gpio_bank(gpio, c, pchip) { + /* restore level with set/clear */ + writel_relaxed(c->saved_gplr, c->regbase + GPSR_OFFSET); + writel_relaxed(~c->saved_gplr, c->regbase + GPCR_OFFSET); + + writel_relaxed(c->saved_grer, c->regbase + GRER_OFFSET); + writel_relaxed(c->saved_gfer, c->regbase + GFER_OFFSET); + writel_relaxed(c->saved_gpdr, c->regbase + GPDR_OFFSET); + } +} +#else +#define pxa_gpio_suspend NULL +#define pxa_gpio_resume NULL +#endif + +struct syscore_ops pxa_gpio_syscore_ops = { + .suspend = pxa_gpio_suspend, + .resume = pxa_gpio_resume, +}; + +static int __init pxa_gpio_sysinit(void) +{ + register_syscore_ops(&pxa_gpio_syscore_ops); + return 0; +} +postcore_initcall(pxa_gpio_sysinit); diff --git a/drivers/gpio/gpio-raspberrypi-exp.c b/drivers/gpio/gpio-raspberrypi-exp.c new file mode 100644 index 000000000..b77ea16ff --- /dev/null +++ b/drivers/gpio/gpio-raspberrypi-exp.c @@ -0,0 +1,253 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Raspberry Pi 3 expander GPIO driver + * + * Uses the firmware mailbox service to communicate with the + * GPIO expander on the VPU. + * + * Copyright (C) 2017 Raspberry Pi Trading Ltd. + */ + +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <soc/bcm2835/raspberrypi-firmware.h> + +#define MODULE_NAME "raspberrypi-exp-gpio" +#define NUM_GPIO 8 + +#define RPI_EXP_GPIO_BASE 128 + +#define RPI_EXP_GPIO_DIR_IN 0 +#define RPI_EXP_GPIO_DIR_OUT 1 + +struct rpi_exp_gpio { + struct gpio_chip gc; + struct rpi_firmware *fw; +}; + +/* VC4 firmware mailbox interface data structures */ + +struct gpio_set_config { + u32 gpio; + u32 direction; + u32 polarity; + u32 term_en; + u32 term_pull_up; + u32 state; +}; + +struct gpio_get_config { + u32 gpio; + u32 direction; + u32 polarity; + u32 term_en; + u32 term_pull_up; +}; + +struct gpio_get_set_state { + u32 gpio; + u32 state; +}; + +static int rpi_exp_gpio_get_polarity(struct gpio_chip *gc, unsigned int off) +{ + struct rpi_exp_gpio *gpio; + struct gpio_get_config get; + int ret; + + gpio = gpiochip_get_data(gc); + + get.gpio = off + RPI_EXP_GPIO_BASE; /* GPIO to update */ + + ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_CONFIG, + &get, sizeof(get)); + if (ret || get.gpio != 0) { + dev_err(gc->parent, "Failed to get GPIO %u config (%d %x)\n", + off, ret, get.gpio); + return ret ? ret : -EIO; + } + return get.polarity; +} + +static int rpi_exp_gpio_dir_in(struct gpio_chip *gc, unsigned int off) +{ + struct rpi_exp_gpio *gpio; + struct gpio_set_config set_in; + int ret; + + gpio = gpiochip_get_data(gc); + + set_in.gpio = off + RPI_EXP_GPIO_BASE; /* GPIO to update */ + set_in.direction = RPI_EXP_GPIO_DIR_IN; + set_in.term_en = 0; /* termination disabled */ + set_in.term_pull_up = 0; /* n/a as termination disabled */ + set_in.state = 0; /* n/a as configured as an input */ + + ret = rpi_exp_gpio_get_polarity(gc, off); + if (ret < 0) + return ret; + set_in.polarity = ret; /* Retain existing setting */ + + ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_CONFIG, + &set_in, sizeof(set_in)); + if (ret || set_in.gpio != 0) { + dev_err(gc->parent, "Failed to set GPIO %u to input (%d %x)\n", + off, ret, set_in.gpio); + return ret ? ret : -EIO; + } + return 0; +} + +static int rpi_exp_gpio_dir_out(struct gpio_chip *gc, unsigned int off, int val) +{ + struct rpi_exp_gpio *gpio; + struct gpio_set_config set_out; + int ret; + + gpio = gpiochip_get_data(gc); + + set_out.gpio = off + RPI_EXP_GPIO_BASE; /* GPIO to update */ + set_out.direction = RPI_EXP_GPIO_DIR_OUT; + set_out.term_en = 0; /* n/a as an output */ + set_out.term_pull_up = 0; /* n/a as termination disabled */ + set_out.state = val; /* Output state */ + + ret = rpi_exp_gpio_get_polarity(gc, off); + if (ret < 0) + return ret; + set_out.polarity = ret; /* Retain existing setting */ + + ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_CONFIG, + &set_out, sizeof(set_out)); + if (ret || set_out.gpio != 0) { + dev_err(gc->parent, "Failed to set GPIO %u to output (%d %x)\n", + off, ret, set_out.gpio); + return ret ? ret : -EIO; + } + return 0; +} + +static int rpi_exp_gpio_get_direction(struct gpio_chip *gc, unsigned int off) +{ + struct rpi_exp_gpio *gpio; + struct gpio_get_config get; + int ret; + + gpio = gpiochip_get_data(gc); + + get.gpio = off + RPI_EXP_GPIO_BASE; /* GPIO to update */ + + ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_CONFIG, + &get, sizeof(get)); + if (ret || get.gpio != 0) { + dev_err(gc->parent, + "Failed to get GPIO %u config (%d %x)\n", off, ret, + get.gpio); + return ret ? ret : -EIO; + } + return !get.direction; +} + +static int rpi_exp_gpio_get(struct gpio_chip *gc, unsigned int off) +{ + struct rpi_exp_gpio *gpio; + struct gpio_get_set_state get; + int ret; + + gpio = gpiochip_get_data(gc); + + get.gpio = off + RPI_EXP_GPIO_BASE; /* GPIO to update */ + get.state = 0; /* storage for returned value */ + + ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_STATE, + &get, sizeof(get)); + if (ret || get.gpio != 0) { + dev_err(gc->parent, + "Failed to get GPIO %u state (%d %x)\n", off, ret, + get.gpio); + return ret ? ret : -EIO; + } + return !!get.state; +} + +static void rpi_exp_gpio_set(struct gpio_chip *gc, unsigned int off, int val) +{ + struct rpi_exp_gpio *gpio; + struct gpio_get_set_state set; + int ret; + + gpio = gpiochip_get_data(gc); + + set.gpio = off + RPI_EXP_GPIO_BASE; /* GPIO to update */ + set.state = val; /* Output state */ + + ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_STATE, + &set, sizeof(set)); + if (ret || set.gpio != 0) + dev_err(gc->parent, + "Failed to set GPIO %u state (%d %x)\n", off, ret, + set.gpio); +} + +static int rpi_exp_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *fw_node; + struct rpi_firmware *fw; + struct rpi_exp_gpio *rpi_gpio; + + fw_node = of_get_parent(np); + if (!fw_node) { + dev_err(dev, "Missing firmware node\n"); + return -ENOENT; + } + + fw = rpi_firmware_get(fw_node); + of_node_put(fw_node); + if (!fw) + return -EPROBE_DEFER; + + rpi_gpio = devm_kzalloc(dev, sizeof(*rpi_gpio), GFP_KERNEL); + if (!rpi_gpio) + return -ENOMEM; + + rpi_gpio->fw = fw; + rpi_gpio->gc.parent = dev; + rpi_gpio->gc.label = MODULE_NAME; + rpi_gpio->gc.owner = THIS_MODULE; + rpi_gpio->gc.of_node = np; + rpi_gpio->gc.base = -1; + rpi_gpio->gc.ngpio = NUM_GPIO; + + rpi_gpio->gc.direction_input = rpi_exp_gpio_dir_in; + rpi_gpio->gc.direction_output = rpi_exp_gpio_dir_out; + rpi_gpio->gc.get_direction = rpi_exp_gpio_get_direction; + rpi_gpio->gc.get = rpi_exp_gpio_get; + rpi_gpio->gc.set = rpi_exp_gpio_set; + rpi_gpio->gc.can_sleep = true; + + return devm_gpiochip_add_data(dev, &rpi_gpio->gc, rpi_gpio); +} + +static const struct of_device_id rpi_exp_gpio_ids[] = { + { .compatible = "raspberrypi,firmware-gpio" }, + { } +}; +MODULE_DEVICE_TABLE(of, rpi_exp_gpio_ids); + +static struct platform_driver rpi_exp_gpio_driver = { + .driver = { + .name = MODULE_NAME, + .of_match_table = of_match_ptr(rpi_exp_gpio_ids), + }, + .probe = rpi_exp_gpio_probe, +}; +module_platform_driver(rpi_exp_gpio_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Dave Stevenson <dave.stevenson@raspberrypi.org>"); +MODULE_DESCRIPTION("Raspberry Pi 3 expander GPIO driver"); +MODULE_ALIAS("platform:rpi-exp-gpio"); diff --git a/drivers/gpio/gpio-rc5t583.c b/drivers/gpio/gpio-rc5t583.c new file mode 100644 index 000000000..a499c633a --- /dev/null +++ b/drivers/gpio/gpio-rc5t583.c @@ -0,0 +1,153 @@ +/* + * GPIO driver for RICOH583 power management chip. + * + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan <ldewangan@nvidia.com> + * + * Based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/device.h> +#include <linux/gpio/driver.h> +#include <linux/mfd/rc5t583.h> + +struct rc5t583_gpio { + struct gpio_chip gpio_chip; + struct rc5t583 *rc5t583; +}; + +static int rc5t583_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct rc5t583_gpio *rc5t583_gpio = gpiochip_get_data(gc); + struct device *parent = rc5t583_gpio->rc5t583->dev; + uint8_t val = 0; + int ret; + + ret = rc5t583_read(parent, RC5T583_GPIO_MON_IOIN, &val); + if (ret < 0) + return ret; + + return !!(val & BIT(offset)); +} + +static void rc5t583_gpio_set(struct gpio_chip *gc, unsigned int offset, int val) +{ + struct rc5t583_gpio *rc5t583_gpio = gpiochip_get_data(gc); + struct device *parent = rc5t583_gpio->rc5t583->dev; + if (val) + rc5t583_set_bits(parent, RC5T583_GPIO_IOOUT, BIT(offset)); + else + rc5t583_clear_bits(parent, RC5T583_GPIO_IOOUT, BIT(offset)); +} + +static int rc5t583_gpio_dir_input(struct gpio_chip *gc, unsigned int offset) +{ + struct rc5t583_gpio *rc5t583_gpio = gpiochip_get_data(gc); + struct device *parent = rc5t583_gpio->rc5t583->dev; + int ret; + + ret = rc5t583_clear_bits(parent, RC5T583_GPIO_IOSEL, BIT(offset)); + if (ret < 0) + return ret; + + /* Set pin to gpio mode */ + return rc5t583_clear_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset)); +} + +static int rc5t583_gpio_dir_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct rc5t583_gpio *rc5t583_gpio = gpiochip_get_data(gc); + struct device *parent = rc5t583_gpio->rc5t583->dev; + int ret; + + rc5t583_gpio_set(gc, offset, value); + ret = rc5t583_set_bits(parent, RC5T583_GPIO_IOSEL, BIT(offset)); + if (ret < 0) + return ret; + + /* Set pin to gpio mode */ + return rc5t583_clear_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset)); +} + +static int rc5t583_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct rc5t583_gpio *rc5t583_gpio = gpiochip_get_data(gc); + + if (offset < RC5T583_MAX_GPIO) + return rc5t583_gpio->rc5t583->irq_base + + RC5T583_IRQ_GPIO0 + offset; + return -EINVAL; +} + +static void rc5t583_gpio_free(struct gpio_chip *gc, unsigned offset) +{ + struct rc5t583_gpio *rc5t583_gpio = gpiochip_get_data(gc); + struct device *parent = rc5t583_gpio->rc5t583->dev; + + rc5t583_set_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset)); +} + +static int rc5t583_gpio_probe(struct platform_device *pdev) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent); + struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev); + struct rc5t583_gpio *rc5t583_gpio; + + rc5t583_gpio = devm_kzalloc(&pdev->dev, sizeof(*rc5t583_gpio), + GFP_KERNEL); + if (!rc5t583_gpio) + return -ENOMEM; + + rc5t583_gpio->gpio_chip.label = "gpio-rc5t583", + rc5t583_gpio->gpio_chip.owner = THIS_MODULE, + rc5t583_gpio->gpio_chip.free = rc5t583_gpio_free, + rc5t583_gpio->gpio_chip.direction_input = rc5t583_gpio_dir_input, + rc5t583_gpio->gpio_chip.direction_output = rc5t583_gpio_dir_output, + rc5t583_gpio->gpio_chip.set = rc5t583_gpio_set, + rc5t583_gpio->gpio_chip.get = rc5t583_gpio_get, + rc5t583_gpio->gpio_chip.to_irq = rc5t583_gpio_to_irq, + rc5t583_gpio->gpio_chip.ngpio = RC5T583_MAX_GPIO, + rc5t583_gpio->gpio_chip.can_sleep = true, + rc5t583_gpio->gpio_chip.parent = &pdev->dev; + rc5t583_gpio->gpio_chip.base = -1; + rc5t583_gpio->rc5t583 = rc5t583; + + if (pdata && pdata->gpio_base) + rc5t583_gpio->gpio_chip.base = pdata->gpio_base; + + platform_set_drvdata(pdev, rc5t583_gpio); + + return devm_gpiochip_add_data(&pdev->dev, &rc5t583_gpio->gpio_chip, + rc5t583_gpio); +} + +static struct platform_driver rc5t583_gpio_driver = { + .driver = { + .name = "rc5t583-gpio", + }, + .probe = rc5t583_gpio_probe, +}; + +static int __init rc5t583_gpio_init(void) +{ + return platform_driver_register(&rc5t583_gpio_driver); +} +subsys_initcall(rc5t583_gpio_init); diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c new file mode 100644 index 000000000..55cc61086 --- /dev/null +++ b/drivers/gpio/gpio-rcar.c @@ -0,0 +1,605 @@ +/* + * Renesas R-Car GPIO Support + * + * Copyright (C) 2014 Renesas Electronics Corporation + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/spinlock.h> +#include <linux/slab.h> + +struct gpio_rcar_bank_info { + u32 iointsel; + u32 inoutsel; + u32 outdt; + u32 posneg; + u32 edglevel; + u32 bothedge; + u32 intmsk; +}; + +struct gpio_rcar_priv { + void __iomem *base; + spinlock_t lock; + struct platform_device *pdev; + struct gpio_chip gpio_chip; + struct irq_chip irq_chip; + unsigned int irq_parent; + atomic_t wakeup_path; + bool has_both_edge_trigger; + struct gpio_rcar_bank_info bank_info; +}; + +#define IOINTSEL 0x00 /* General IO/Interrupt Switching Register */ +#define INOUTSEL 0x04 /* General Input/Output Switching Register */ +#define OUTDT 0x08 /* General Output Register */ +#define INDT 0x0c /* General Input Register */ +#define INTDT 0x10 /* Interrupt Display Register */ +#define INTCLR 0x14 /* Interrupt Clear Register */ +#define INTMSK 0x18 /* Interrupt Mask Register */ +#define MSKCLR 0x1c /* Interrupt Mask Clear Register */ +#define POSNEG 0x20 /* Positive/Negative Logic Select Register */ +#define EDGLEVEL 0x24 /* Edge/level Select Register */ +#define FILONOFF 0x28 /* Chattering Prevention On/Off Register */ +#define BOTHEDGE 0x4c /* One Edge/Both Edge Select Register */ + +#define RCAR_MAX_GPIO_PER_BANK 32 + +static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs) +{ + return ioread32(p->base + offs); +} + +static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs, + u32 value) +{ + iowrite32(value, p->base + offs); +} + +static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs, + int bit, bool value) +{ + u32 tmp = gpio_rcar_read(p, offs); + + if (value) + tmp |= BIT(bit); + else + tmp &= ~BIT(bit); + + gpio_rcar_write(p, offs, tmp); +} + +static void gpio_rcar_irq_disable(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct gpio_rcar_priv *p = gpiochip_get_data(gc); + + gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d))); +} + +static void gpio_rcar_irq_enable(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct gpio_rcar_priv *p = gpiochip_get_data(gc); + + gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d))); +} + +static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p, + unsigned int hwirq, + bool active_high_rising_edge, + bool level_trigger, + bool both) +{ + unsigned long flags; + + /* follow steps in the GPIO documentation for + * "Setting Edge-Sensitive Interrupt Input Mode" and + * "Setting Level-Sensitive Interrupt Input Mode" + */ + + spin_lock_irqsave(&p->lock, flags); + + /* Configure postive or negative logic in POSNEG */ + gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge); + + /* Configure edge or level trigger in EDGLEVEL */ + gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger); + + /* Select one edge or both edges in BOTHEDGE */ + if (p->has_both_edge_trigger) + gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both); + + /* Select "Interrupt Input Mode" in IOINTSEL */ + gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true); + + /* Write INTCLR in case of edge trigger */ + if (!level_trigger) + gpio_rcar_write(p, INTCLR, BIT(hwirq)); + + spin_unlock_irqrestore(&p->lock, flags); +} + +static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct gpio_rcar_priv *p = gpiochip_get_data(gc); + unsigned int hwirq = irqd_to_hwirq(d); + + dev_dbg(&p->pdev->dev, "sense irq = %d, type = %d\n", hwirq, type); + + switch (type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_LEVEL_HIGH: + gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true, + false); + break; + case IRQ_TYPE_LEVEL_LOW: + gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true, + false); + break; + case IRQ_TYPE_EDGE_RISING: + gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false, + false); + break; + case IRQ_TYPE_EDGE_FALLING: + gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false, + false); + break; + case IRQ_TYPE_EDGE_BOTH: + if (!p->has_both_edge_trigger) + return -EINVAL; + gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false, + true); + break; + default: + return -EINVAL; + } + return 0; +} + +static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct gpio_rcar_priv *p = gpiochip_get_data(gc); + int error; + + if (p->irq_parent) { + error = irq_set_irq_wake(p->irq_parent, on); + if (error) { + dev_dbg(&p->pdev->dev, + "irq %u doesn't support irq_set_wake\n", + p->irq_parent); + p->irq_parent = 0; + } + } + + if (on) + atomic_inc(&p->wakeup_path); + else + atomic_dec(&p->wakeup_path); + + return 0; +} + +static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id) +{ + struct gpio_rcar_priv *p = dev_id; + u32 pending; + unsigned int offset, irqs_handled = 0; + + while ((pending = gpio_rcar_read(p, INTDT) & + gpio_rcar_read(p, INTMSK))) { + offset = __ffs(pending); + gpio_rcar_write(p, INTCLR, BIT(offset)); + generic_handle_irq(irq_find_mapping(p->gpio_chip.irq.domain, + offset)); + irqs_handled++; + } + + return irqs_handled ? IRQ_HANDLED : IRQ_NONE; +} + +static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip, + unsigned int gpio, + bool output) +{ + struct gpio_rcar_priv *p = gpiochip_get_data(chip); + unsigned long flags; + + /* follow steps in the GPIO documentation for + * "Setting General Output Mode" and + * "Setting General Input Mode" + */ + + spin_lock_irqsave(&p->lock, flags); + + /* Configure postive logic in POSNEG */ + gpio_rcar_modify_bit(p, POSNEG, gpio, false); + + /* Select "General Input/Output Mode" in IOINTSEL */ + gpio_rcar_modify_bit(p, IOINTSEL, gpio, false); + + /* Select Input Mode or Output Mode in INOUTSEL */ + gpio_rcar_modify_bit(p, INOUTSEL, gpio, output); + + spin_unlock_irqrestore(&p->lock, flags); +} + +static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_rcar_priv *p = gpiochip_get_data(chip); + int error; + + error = pm_runtime_get_sync(&p->pdev->dev); + if (error < 0) + return error; + + error = pinctrl_gpio_request(chip->base + offset); + if (error) + pm_runtime_put(&p->pdev->dev); + + return error; +} + +static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_rcar_priv *p = gpiochip_get_data(chip); + + pinctrl_gpio_free(chip->base + offset); + + /* + * Set the GPIO as an input to ensure that the next GPIO request won't + * drive the GPIO pin as an output. + */ + gpio_rcar_config_general_input_output_mode(chip, offset, false); + + pm_runtime_put(&p->pdev->dev); +} + +static int gpio_rcar_get_direction(struct gpio_chip *chip, unsigned int offset) +{ + struct gpio_rcar_priv *p = gpiochip_get_data(chip); + + return !(gpio_rcar_read(p, INOUTSEL) & BIT(offset)); +} + +static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset) +{ + gpio_rcar_config_general_input_output_mode(chip, offset, false); + return 0; +} + +static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset) +{ + u32 bit = BIT(offset); + + /* testing on r8a7790 shows that INDT does not show correct pin state + * when configured as output, so use OUTDT in case of output pins */ + if (gpio_rcar_read(gpiochip_get_data(chip), INOUTSEL) & bit) + return !!(gpio_rcar_read(gpiochip_get_data(chip), OUTDT) & bit); + else + return !!(gpio_rcar_read(gpiochip_get_data(chip), INDT) & bit); +} + +static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct gpio_rcar_priv *p = gpiochip_get_data(chip); + unsigned long flags; + + spin_lock_irqsave(&p->lock, flags); + gpio_rcar_modify_bit(p, OUTDT, offset, value); + spin_unlock_irqrestore(&p->lock, flags); +} + +static void gpio_rcar_set_multiple(struct gpio_chip *chip, unsigned long *mask, + unsigned long *bits) +{ + struct gpio_rcar_priv *p = gpiochip_get_data(chip); + unsigned long flags; + u32 val, bankmask; + + bankmask = mask[0] & GENMASK(chip->ngpio - 1, 0); + if (!bankmask) + return; + + spin_lock_irqsave(&p->lock, flags); + val = gpio_rcar_read(p, OUTDT); + val &= ~bankmask; + val |= (bankmask & bits[0]); + gpio_rcar_write(p, OUTDT, val); + spin_unlock_irqrestore(&p->lock, flags); +} + +static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + /* write GPIO value to output before selecting output mode of pin */ + gpio_rcar_set(chip, offset, value); + gpio_rcar_config_general_input_output_mode(chip, offset, true); + return 0; +} + +struct gpio_rcar_info { + bool has_both_edge_trigger; +}; + +static const struct gpio_rcar_info gpio_rcar_info_gen1 = { + .has_both_edge_trigger = false, +}; + +static const struct gpio_rcar_info gpio_rcar_info_gen2 = { + .has_both_edge_trigger = true, +}; + +static const struct of_device_id gpio_rcar_of_table[] = { + { + .compatible = "renesas,gpio-r8a7743", + /* RZ/G1 GPIO is identical to R-Car Gen2. */ + .data = &gpio_rcar_info_gen2, + }, { + .compatible = "renesas,gpio-r8a7790", + .data = &gpio_rcar_info_gen2, + }, { + .compatible = "renesas,gpio-r8a7791", + .data = &gpio_rcar_info_gen2, + }, { + .compatible = "renesas,gpio-r8a7792", + .data = &gpio_rcar_info_gen2, + }, { + .compatible = "renesas,gpio-r8a7793", + .data = &gpio_rcar_info_gen2, + }, { + .compatible = "renesas,gpio-r8a7794", + .data = &gpio_rcar_info_gen2, + }, { + .compatible = "renesas,gpio-r8a7795", + /* Gen3 GPIO is identical to Gen2. */ + .data = &gpio_rcar_info_gen2, + }, { + .compatible = "renesas,gpio-r8a7796", + /* Gen3 GPIO is identical to Gen2. */ + .data = &gpio_rcar_info_gen2, + }, { + .compatible = "renesas,rcar-gen1-gpio", + .data = &gpio_rcar_info_gen1, + }, { + .compatible = "renesas,rcar-gen2-gpio", + .data = &gpio_rcar_info_gen2, + }, { + .compatible = "renesas,rcar-gen3-gpio", + /* Gen3 GPIO is identical to Gen2. */ + .data = &gpio_rcar_info_gen2, + }, { + .compatible = "renesas,gpio-rcar", + .data = &gpio_rcar_info_gen1, + }, { + /* Terminator */ + }, +}; + +MODULE_DEVICE_TABLE(of, gpio_rcar_of_table); + +static int gpio_rcar_parse_dt(struct gpio_rcar_priv *p, unsigned int *npins) +{ + struct device_node *np = p->pdev->dev.of_node; + const struct gpio_rcar_info *info; + struct of_phandle_args args; + int ret; + + info = of_device_get_match_data(&p->pdev->dev); + + ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &args); + *npins = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK; + p->has_both_edge_trigger = info->has_both_edge_trigger; + + if (*npins == 0 || *npins > RCAR_MAX_GPIO_PER_BANK) { + dev_warn(&p->pdev->dev, + "Invalid number of gpio lines %u, using %u\n", *npins, + RCAR_MAX_GPIO_PER_BANK); + *npins = RCAR_MAX_GPIO_PER_BANK; + } + + return 0; +} + +static int gpio_rcar_probe(struct platform_device *pdev) +{ + struct gpio_rcar_priv *p; + struct resource *io, *irq; + struct gpio_chip *gpio_chip; + struct irq_chip *irq_chip; + struct device *dev = &pdev->dev; + const char *name = dev_name(dev); + unsigned int npins; + int ret; + + p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL); + if (!p) + return -ENOMEM; + + p->pdev = pdev; + spin_lock_init(&p->lock); + + /* Get device configuration from DT node */ + ret = gpio_rcar_parse_dt(p, &npins); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, p); + + pm_runtime_enable(dev); + + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq) { + dev_err(dev, "missing IRQ\n"); + ret = -EINVAL; + goto err0; + } + + io = platform_get_resource(pdev, IORESOURCE_MEM, 0); + p->base = devm_ioremap_resource(dev, io); + if (IS_ERR(p->base)) { + ret = PTR_ERR(p->base); + goto err0; + } + + gpio_chip = &p->gpio_chip; + gpio_chip->request = gpio_rcar_request; + gpio_chip->free = gpio_rcar_free; + gpio_chip->get_direction = gpio_rcar_get_direction; + gpio_chip->direction_input = gpio_rcar_direction_input; + gpio_chip->get = gpio_rcar_get; + gpio_chip->direction_output = gpio_rcar_direction_output; + gpio_chip->set = gpio_rcar_set; + gpio_chip->set_multiple = gpio_rcar_set_multiple; + gpio_chip->label = name; + gpio_chip->parent = dev; + gpio_chip->owner = THIS_MODULE; + gpio_chip->base = -1; + gpio_chip->ngpio = npins; + + irq_chip = &p->irq_chip; + irq_chip->name = name; + irq_chip->parent_device = dev; + irq_chip->irq_mask = gpio_rcar_irq_disable; + irq_chip->irq_unmask = gpio_rcar_irq_enable; + irq_chip->irq_set_type = gpio_rcar_irq_set_type; + irq_chip->irq_set_wake = gpio_rcar_irq_set_wake; + irq_chip->flags = IRQCHIP_SET_TYPE_MASKED | IRQCHIP_MASK_ON_SUSPEND; + + ret = gpiochip_add_data(gpio_chip, p); + if (ret) { + dev_err(dev, "failed to add GPIO controller\n"); + goto err0; + } + + ret = gpiochip_irqchip_add(gpio_chip, irq_chip, 0, handle_level_irq, + IRQ_TYPE_NONE); + if (ret) { + dev_err(dev, "cannot add irqchip\n"); + goto err1; + } + + p->irq_parent = irq->start; + if (devm_request_irq(dev, irq->start, gpio_rcar_irq_handler, + IRQF_SHARED, name, p)) { + dev_err(dev, "failed to request IRQ\n"); + ret = -ENOENT; + goto err1; + } + + dev_info(dev, "driving %d GPIOs\n", npins); + + return 0; + +err1: + gpiochip_remove(gpio_chip); +err0: + pm_runtime_disable(dev); + return ret; +} + +static int gpio_rcar_remove(struct platform_device *pdev) +{ + struct gpio_rcar_priv *p = platform_get_drvdata(pdev); + + gpiochip_remove(&p->gpio_chip); + + pm_runtime_disable(&pdev->dev); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int gpio_rcar_suspend(struct device *dev) +{ + struct gpio_rcar_priv *p = dev_get_drvdata(dev); + + p->bank_info.iointsel = gpio_rcar_read(p, IOINTSEL); + p->bank_info.inoutsel = gpio_rcar_read(p, INOUTSEL); + p->bank_info.outdt = gpio_rcar_read(p, OUTDT); + p->bank_info.intmsk = gpio_rcar_read(p, INTMSK); + p->bank_info.posneg = gpio_rcar_read(p, POSNEG); + p->bank_info.edglevel = gpio_rcar_read(p, EDGLEVEL); + if (p->has_both_edge_trigger) + p->bank_info.bothedge = gpio_rcar_read(p, BOTHEDGE); + + if (atomic_read(&p->wakeup_path)) + device_set_wakeup_path(dev); + + return 0; +} + +static int gpio_rcar_resume(struct device *dev) +{ + struct gpio_rcar_priv *p = dev_get_drvdata(dev); + unsigned int offset; + u32 mask; + + for (offset = 0; offset < p->gpio_chip.ngpio; offset++) { + mask = BIT(offset); + /* I/O pin */ + if (!(p->bank_info.iointsel & mask)) { + if (p->bank_info.inoutsel & mask) + gpio_rcar_direction_output( + &p->gpio_chip, offset, + !!(p->bank_info.outdt & mask)); + else + gpio_rcar_direction_input(&p->gpio_chip, + offset); + } else { + /* Interrupt pin */ + gpio_rcar_config_interrupt_input_mode( + p, + offset, + !(p->bank_info.posneg & mask), + !(p->bank_info.edglevel & mask), + !!(p->bank_info.bothedge & mask)); + + if (p->bank_info.intmsk & mask) + gpio_rcar_write(p, MSKCLR, mask); + } + } + + return 0; +} +#endif /* CONFIG_PM_SLEEP*/ + +static SIMPLE_DEV_PM_OPS(gpio_rcar_pm_ops, gpio_rcar_suspend, gpio_rcar_resume); + +static struct platform_driver gpio_rcar_device_driver = { + .probe = gpio_rcar_probe, + .remove = gpio_rcar_remove, + .driver = { + .name = "gpio_rcar", + .pm = &gpio_rcar_pm_ops, + .of_match_table = of_match_ptr(gpio_rcar_of_table), + } +}; + +module_platform_driver(gpio_rcar_device_driver); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("Renesas R-Car GPIO Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-rdc321x.c b/drivers/gpio/gpio-rdc321x.c new file mode 100644 index 000000000..293821756 --- /dev/null +++ b/drivers/gpio/gpio-rdc321x.c @@ -0,0 +1,211 @@ +/* + * RDC321x GPIO driver + * + * Copyright (C) 2008, Volker Weiss <dev@tintuc.de> + * Copyright (C) 2007-2010 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/gpio/driver.h> +#include <linux/mfd/rdc321x.h> +#include <linux/slab.h> + +struct rdc321x_gpio { + spinlock_t lock; + struct pci_dev *sb_pdev; + u32 data_reg[2]; + int reg1_ctrl_base; + int reg1_data_base; + int reg2_ctrl_base; + int reg2_data_base; + struct gpio_chip chip; +}; + +/* read GPIO pin */ +static int rdc_gpio_get_value(struct gpio_chip *chip, unsigned gpio) +{ + struct rdc321x_gpio *gpch; + u32 value = 0; + int reg; + + gpch = gpiochip_get_data(chip); + reg = gpio < 32 ? gpch->reg1_data_base : gpch->reg2_data_base; + + spin_lock(&gpch->lock); + pci_write_config_dword(gpch->sb_pdev, reg, + gpch->data_reg[gpio < 32 ? 0 : 1]); + pci_read_config_dword(gpch->sb_pdev, reg, &value); + spin_unlock(&gpch->lock); + + return (1 << (gpio & 0x1f)) & value ? 1 : 0; +} + +static void rdc_gpio_set_value_impl(struct gpio_chip *chip, + unsigned gpio, int value) +{ + struct rdc321x_gpio *gpch; + int reg = (gpio < 32) ? 0 : 1; + + gpch = gpiochip_get_data(chip); + + if (value) + gpch->data_reg[reg] |= 1 << (gpio & 0x1f); + else + gpch->data_reg[reg] &= ~(1 << (gpio & 0x1f)); + + pci_write_config_dword(gpch->sb_pdev, + reg ? gpch->reg2_data_base : gpch->reg1_data_base, + gpch->data_reg[reg]); +} + +/* set GPIO pin to value */ +static void rdc_gpio_set_value(struct gpio_chip *chip, + unsigned gpio, int value) +{ + struct rdc321x_gpio *gpch; + + gpch = gpiochip_get_data(chip); + spin_lock(&gpch->lock); + rdc_gpio_set_value_impl(chip, gpio, value); + spin_unlock(&gpch->lock); +} + +static int rdc_gpio_config(struct gpio_chip *chip, + unsigned gpio, int value) +{ + struct rdc321x_gpio *gpch; + int err; + u32 reg; + + gpch = gpiochip_get_data(chip); + + spin_lock(&gpch->lock); + err = pci_read_config_dword(gpch->sb_pdev, gpio < 32 ? + gpch->reg1_ctrl_base : gpch->reg2_ctrl_base, ®); + if (err) + goto unlock; + + reg |= 1 << (gpio & 0x1f); + + err = pci_write_config_dword(gpch->sb_pdev, gpio < 32 ? + gpch->reg1_ctrl_base : gpch->reg2_ctrl_base, reg); + if (err) + goto unlock; + + rdc_gpio_set_value_impl(chip, gpio, value); + +unlock: + spin_unlock(&gpch->lock); + + return err; +} + +/* configure GPIO pin as input */ +static int rdc_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + return rdc_gpio_config(chip, gpio, 1); +} + +/* + * Cache the initial value of both GPIO data registers + */ +static int rdc321x_gpio_probe(struct platform_device *pdev) +{ + int err; + struct resource *r; + struct rdc321x_gpio *rdc321x_gpio_dev; + struct rdc321x_gpio_pdata *pdata; + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "no platform data supplied\n"); + return -ENODEV; + } + + rdc321x_gpio_dev = devm_kzalloc(&pdev->dev, sizeof(struct rdc321x_gpio), + GFP_KERNEL); + if (!rdc321x_gpio_dev) + return -ENOMEM; + + r = platform_get_resource_byname(pdev, IORESOURCE_IO, "gpio-reg1"); + if (!r) { + dev_err(&pdev->dev, "failed to get gpio-reg1 resource\n"); + return -ENODEV; + } + + spin_lock_init(&rdc321x_gpio_dev->lock); + rdc321x_gpio_dev->sb_pdev = pdata->sb_pdev; + rdc321x_gpio_dev->reg1_ctrl_base = r->start; + rdc321x_gpio_dev->reg1_data_base = r->start + 0x4; + + r = platform_get_resource_byname(pdev, IORESOURCE_IO, "gpio-reg2"); + if (!r) { + dev_err(&pdev->dev, "failed to get gpio-reg2 resource\n"); + return -ENODEV; + } + + rdc321x_gpio_dev->reg2_ctrl_base = r->start; + rdc321x_gpio_dev->reg2_data_base = r->start + 0x4; + + rdc321x_gpio_dev->chip.label = "rdc321x-gpio"; + rdc321x_gpio_dev->chip.owner = THIS_MODULE; + rdc321x_gpio_dev->chip.direction_input = rdc_gpio_direction_input; + rdc321x_gpio_dev->chip.direction_output = rdc_gpio_config; + rdc321x_gpio_dev->chip.get = rdc_gpio_get_value; + rdc321x_gpio_dev->chip.set = rdc_gpio_set_value; + rdc321x_gpio_dev->chip.base = 0; + rdc321x_gpio_dev->chip.ngpio = pdata->max_gpios; + + platform_set_drvdata(pdev, rdc321x_gpio_dev); + + /* This might not be, what others (BIOS, bootloader, etc.) + wrote to these registers before, but it's a good guess. Still + better than just using 0xffffffff. */ + err = pci_read_config_dword(rdc321x_gpio_dev->sb_pdev, + rdc321x_gpio_dev->reg1_data_base, + &rdc321x_gpio_dev->data_reg[0]); + if (err) + return err; + + err = pci_read_config_dword(rdc321x_gpio_dev->sb_pdev, + rdc321x_gpio_dev->reg2_data_base, + &rdc321x_gpio_dev->data_reg[1]); + if (err) + return err; + + dev_info(&pdev->dev, "registering %d GPIOs\n", + rdc321x_gpio_dev->chip.ngpio); + return devm_gpiochip_add_data(&pdev->dev, &rdc321x_gpio_dev->chip, + rdc321x_gpio_dev); +} + +static struct platform_driver rdc321x_gpio_driver = { + .driver.name = "rdc321x-gpio", + .probe = rdc321x_gpio_probe, +}; + +module_platform_driver(rdc321x_gpio_driver); + +MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); +MODULE_DESCRIPTION("RDC321x GPIO driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:rdc321x-gpio"); diff --git a/drivers/gpio/gpio-reg.c b/drivers/gpio/gpio-reg.c new file mode 100644 index 000000000..e85903edd --- /dev/null +++ b/drivers/gpio/gpio-reg.c @@ -0,0 +1,185 @@ +/* + * gpio-reg: single register individually fixed-direction GPIOs + * + * Copyright (C) 2016 Russell King + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + */ +#include <linux/gpio/driver.h> +#include <linux/gpio/gpio-reg.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +struct gpio_reg { + struct gpio_chip gc; + spinlock_t lock; + u32 direction; + u32 out; + void __iomem *reg; + struct irq_domain *irqdomain; + const int *irqs; +}; + +#define to_gpio_reg(x) container_of(x, struct gpio_reg, gc) + +static int gpio_reg_get_direction(struct gpio_chip *gc, unsigned offset) +{ + struct gpio_reg *r = to_gpio_reg(gc); + + return r->direction & BIT(offset) ? 1 : 0; +} + +static int gpio_reg_direction_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct gpio_reg *r = to_gpio_reg(gc); + + if (r->direction & BIT(offset)) + return -ENOTSUPP; + + gc->set(gc, offset, value); + return 0; +} + +static int gpio_reg_direction_input(struct gpio_chip *gc, unsigned offset) +{ + struct gpio_reg *r = to_gpio_reg(gc); + + return r->direction & BIT(offset) ? 0 : -ENOTSUPP; +} + +static void gpio_reg_set(struct gpio_chip *gc, unsigned offset, int value) +{ + struct gpio_reg *r = to_gpio_reg(gc); + unsigned long flags; + u32 val, mask = BIT(offset); + + spin_lock_irqsave(&r->lock, flags); + val = r->out; + if (value) + val |= mask; + else + val &= ~mask; + r->out = val; + writel_relaxed(val, r->reg); + spin_unlock_irqrestore(&r->lock, flags); +} + +static int gpio_reg_get(struct gpio_chip *gc, unsigned offset) +{ + struct gpio_reg *r = to_gpio_reg(gc); + u32 val, mask = BIT(offset); + + if (r->direction & mask) { + /* + * double-read the value, some registers latch after the + * first read. + */ + readl_relaxed(r->reg); + val = readl_relaxed(r->reg); + } else { + val = r->out; + } + return !!(val & mask); +} + +static void gpio_reg_set_multiple(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + struct gpio_reg *r = to_gpio_reg(gc); + unsigned long flags; + + spin_lock_irqsave(&r->lock, flags); + r->out = (r->out & ~*mask) | (*bits & *mask); + writel_relaxed(r->out, r->reg); + spin_unlock_irqrestore(&r->lock, flags); +} + +static int gpio_reg_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct gpio_reg *r = to_gpio_reg(gc); + int irq = r->irqs[offset]; + + if (irq >= 0 && r->irqdomain) + irq = irq_find_mapping(r->irqdomain, irq); + + return irq; +} + +/** + * gpio_reg_init - add a fixed in/out register as gpio + * @dev: optional struct device associated with this register + * @base: start gpio number, or -1 to allocate + * @num: number of GPIOs, maximum 32 + * @label: GPIO chip label + * @direction: bitmask of fixed direction, one per GPIO signal, 1 = in + * @def_out: initial GPIO output value + * @names: array of %num strings describing each GPIO signal or %NULL + * @irqdom: irq domain or %NULL + * @irqs: array of %num ints describing the interrupt mapping for each + * GPIO signal, or %NULL. If @irqdom is %NULL, then this + * describes the Linux interrupt number, otherwise it describes + * the hardware interrupt number in the specified irq domain. + * + * Add a single-register GPIO device containing up to 32 GPIO signals, + * where each GPIO has a fixed input or output configuration. Only + * input GPIOs are assumed to be readable from the register, and only + * then after a double-read. Output values are assumed not to be + * readable. + */ +struct gpio_chip *gpio_reg_init(struct device *dev, void __iomem *reg, + int base, int num, const char *label, u32 direction, u32 def_out, + const char *const *names, struct irq_domain *irqdom, const int *irqs) +{ + struct gpio_reg *r; + int ret; + + if (dev) + r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL); + else + r = kzalloc(sizeof(*r), GFP_KERNEL); + + if (!r) + return ERR_PTR(-ENOMEM); + + spin_lock_init(&r->lock); + + r->gc.label = label; + r->gc.get_direction = gpio_reg_get_direction; + r->gc.direction_input = gpio_reg_direction_input; + r->gc.direction_output = gpio_reg_direction_output; + r->gc.set = gpio_reg_set; + r->gc.get = gpio_reg_get; + r->gc.set_multiple = gpio_reg_set_multiple; + if (irqs) + r->gc.to_irq = gpio_reg_to_irq; + r->gc.base = base; + r->gc.ngpio = num; + r->gc.names = names; + r->direction = direction; + r->out = def_out; + r->reg = reg; + r->irqs = irqs; + + if (dev) + ret = devm_gpiochip_add_data(dev, &r->gc, r); + else + ret = gpiochip_add_data(&r->gc, r); + + return ret ? ERR_PTR(ret) : &r->gc; +} + +int gpio_reg_resume(struct gpio_chip *gc) +{ + struct gpio_reg *r = to_gpio_reg(gc); + unsigned long flags; + + spin_lock_irqsave(&r->lock, flags); + writel_relaxed(r->out, r->reg); + spin_unlock_irqrestore(&r->lock, flags); + + return 0; +} diff --git a/drivers/gpio/gpio-sa1100.c b/drivers/gpio/gpio-sa1100.c new file mode 100644 index 000000000..986eb3b23 --- /dev/null +++ b/drivers/gpio/gpio-sa1100.c @@ -0,0 +1,328 @@ +/* + * linux/arch/arm/mach-sa1100/gpio.c + * + * Generic SA-1100 GPIO handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/gpio/driver.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/syscore_ops.h> +#include <soc/sa1100/pwer.h> +#include <mach/hardware.h> +#include <mach/irqs.h> + +struct sa1100_gpio_chip { + struct gpio_chip chip; + void __iomem *membase; + int irqbase; + u32 irqmask; + u32 irqrising; + u32 irqfalling; + u32 irqwake; +}; + +#define sa1100_gpio_chip(x) container_of(x, struct sa1100_gpio_chip, chip) + +enum { + R_GPLR = 0x00, + R_GPDR = 0x04, + R_GPSR = 0x08, + R_GPCR = 0x0c, + R_GRER = 0x10, + R_GFER = 0x14, + R_GEDR = 0x18, + R_GAFR = 0x1c, +}; + +static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + return readl_relaxed(sa1100_gpio_chip(chip)->membase + R_GPLR) & + BIT(offset); +} + +static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + int reg = value ? R_GPSR : R_GPCR; + + writel_relaxed(BIT(offset), sa1100_gpio_chip(chip)->membase + reg); +} + +static int sa1100_get_direction(struct gpio_chip *chip, unsigned offset) +{ + void __iomem *gpdr = sa1100_gpio_chip(chip)->membase + R_GPDR; + + return !(readl_relaxed(gpdr) & BIT(offset)); +} + +static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset) +{ + void __iomem *gpdr = sa1100_gpio_chip(chip)->membase + R_GPDR; + unsigned long flags; + + local_irq_save(flags); + writel_relaxed(readl_relaxed(gpdr) & ~BIT(offset), gpdr); + local_irq_restore(flags); + + return 0; +} + +static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value) +{ + void __iomem *gpdr = sa1100_gpio_chip(chip)->membase + R_GPDR; + unsigned long flags; + + local_irq_save(flags); + sa1100_gpio_set(chip, offset, value); + writel_relaxed(readl_relaxed(gpdr) | BIT(offset), gpdr); + local_irq_restore(flags); + + return 0; +} + +static int sa1100_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return sa1100_gpio_chip(chip)->irqbase + offset; +} + +static struct sa1100_gpio_chip sa1100_gpio_chip = { + .chip = { + .label = "gpio", + .get_direction = sa1100_get_direction, + .direction_input = sa1100_direction_input, + .direction_output = sa1100_direction_output, + .set = sa1100_gpio_set, + .get = sa1100_gpio_get, + .to_irq = sa1100_to_irq, + .base = 0, + .ngpio = GPIO_MAX + 1, + }, + .membase = (void *)&GPLR, + .irqbase = IRQ_GPIO0, +}; + +/* + * SA1100 GPIO edge detection for IRQs: + * IRQs are generated on Falling-Edge, Rising-Edge, or both. + * Use this instead of directly setting GRER/GFER. + */ +static void sa1100_update_edge_regs(struct sa1100_gpio_chip *sgc) +{ + void *base = sgc->membase; + u32 grer, gfer; + + grer = sgc->irqrising & sgc->irqmask; + gfer = sgc->irqfalling & sgc->irqmask; + + writel_relaxed(grer, base + R_GRER); + writel_relaxed(gfer, base + R_GFER); +} + +static int sa1100_gpio_type(struct irq_data *d, unsigned int type) +{ + struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d); + unsigned int mask = BIT(d->hwirq); + + if (type == IRQ_TYPE_PROBE) { + if ((sgc->irqrising | sgc->irqfalling) & mask) + return 0; + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + } + + if (type & IRQ_TYPE_EDGE_RISING) + sgc->irqrising |= mask; + else + sgc->irqrising &= ~mask; + if (type & IRQ_TYPE_EDGE_FALLING) + sgc->irqfalling |= mask; + else + sgc->irqfalling &= ~mask; + + sa1100_update_edge_regs(sgc); + + return 0; +} + +/* + * GPIO IRQs must be acknowledged. + */ +static void sa1100_gpio_ack(struct irq_data *d) +{ + struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d); + + writel_relaxed(BIT(d->hwirq), sgc->membase + R_GEDR); +} + +static void sa1100_gpio_mask(struct irq_data *d) +{ + struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d); + unsigned int mask = BIT(d->hwirq); + + sgc->irqmask &= ~mask; + + sa1100_update_edge_regs(sgc); +} + +static void sa1100_gpio_unmask(struct irq_data *d) +{ + struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d); + unsigned int mask = BIT(d->hwirq); + + sgc->irqmask |= mask; + + sa1100_update_edge_regs(sgc); +} + +static int sa1100_gpio_wake(struct irq_data *d, unsigned int on) +{ + struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d); + int ret = sa11x0_gpio_set_wake(d->hwirq, on); + if (!ret) { + if (on) + sgc->irqwake |= BIT(d->hwirq); + else + sgc->irqwake &= ~BIT(d->hwirq); + } + return ret; +} + +/* + * This is for GPIO IRQs + */ +static struct irq_chip sa1100_gpio_irq_chip = { + .name = "GPIO", + .irq_ack = sa1100_gpio_ack, + .irq_mask = sa1100_gpio_mask, + .irq_unmask = sa1100_gpio_unmask, + .irq_set_type = sa1100_gpio_type, + .irq_set_wake = sa1100_gpio_wake, +}; + +static int sa1100_gpio_irqdomain_map(struct irq_domain *d, + unsigned int irq, irq_hw_number_t hwirq) +{ + struct sa1100_gpio_chip *sgc = d->host_data; + + irq_set_chip_data(irq, sgc); + irq_set_chip_and_handler(irq, &sa1100_gpio_irq_chip, handle_edge_irq); + irq_set_probe(irq); + + return 0; +} + +static const struct irq_domain_ops sa1100_gpio_irqdomain_ops = { + .map = sa1100_gpio_irqdomain_map, + .xlate = irq_domain_xlate_onetwocell, +}; + +static struct irq_domain *sa1100_gpio_irqdomain; + +/* + * IRQ 0-11 (GPIO) handler. We enter here with the + * irq_controller_lock held, and IRQs disabled. Decode the IRQ + * and call the handler. + */ +static void sa1100_gpio_handler(struct irq_desc *desc) +{ + struct sa1100_gpio_chip *sgc = irq_desc_get_handler_data(desc); + unsigned int irq, mask; + void __iomem *gedr = sgc->membase + R_GEDR; + + mask = readl_relaxed(gedr); + do { + /* + * clear down all currently active IRQ sources. + * We will be processing them all. + */ + writel_relaxed(mask, gedr); + + irq = sgc->irqbase; + do { + if (mask & 1) + generic_handle_irq(irq); + mask >>= 1; + irq++; + } while (mask); + + mask = readl_relaxed(gedr); + } while (mask); +} + +static int sa1100_gpio_suspend(void) +{ + struct sa1100_gpio_chip *sgc = &sa1100_gpio_chip; + + /* + * Set the appropriate edges for wakeup. + */ + writel_relaxed(sgc->irqwake & sgc->irqrising, sgc->membase + R_GRER); + writel_relaxed(sgc->irqwake & sgc->irqfalling, sgc->membase + R_GFER); + + /* + * Clear any pending GPIO interrupts. + */ + writel_relaxed(readl_relaxed(sgc->membase + R_GEDR), + sgc->membase + R_GEDR); + + return 0; +} + +static void sa1100_gpio_resume(void) +{ + sa1100_update_edge_regs(&sa1100_gpio_chip); +} + +static struct syscore_ops sa1100_gpio_syscore_ops = { + .suspend = sa1100_gpio_suspend, + .resume = sa1100_gpio_resume, +}; + +static int __init sa1100_gpio_init_devicefs(void) +{ + register_syscore_ops(&sa1100_gpio_syscore_ops); + return 0; +} + +device_initcall(sa1100_gpio_init_devicefs); + +static const int sa1100_gpio_irqs[] __initconst = { + /* Install handlers for GPIO 0-10 edge detect interrupts */ + IRQ_GPIO0_SC, + IRQ_GPIO1_SC, + IRQ_GPIO2_SC, + IRQ_GPIO3_SC, + IRQ_GPIO4_SC, + IRQ_GPIO5_SC, + IRQ_GPIO6_SC, + IRQ_GPIO7_SC, + IRQ_GPIO8_SC, + IRQ_GPIO9_SC, + IRQ_GPIO10_SC, + /* Install handler for GPIO 11-27 edge detect interrupts */ + IRQ_GPIO11_27, +}; + +void __init sa1100_init_gpio(void) +{ + struct sa1100_gpio_chip *sgc = &sa1100_gpio_chip; + int i; + + /* clear all GPIO edge detects */ + writel_relaxed(0, sgc->membase + R_GFER); + writel_relaxed(0, sgc->membase + R_GRER); + writel_relaxed(-1, sgc->membase + R_GEDR); + + gpiochip_add_data(&sa1100_gpio_chip.chip, NULL); + + sa1100_gpio_irqdomain = irq_domain_add_simple(NULL, + 28, IRQ_GPIO0, + &sa1100_gpio_irqdomain_ops, sgc); + + for (i = 0; i < ARRAY_SIZE(sa1100_gpio_irqs); i++) + irq_set_chained_handler_and_data(sa1100_gpio_irqs[i], + sa1100_gpio_handler, sgc); +} diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c new file mode 100644 index 000000000..e9878f6ed --- /dev/null +++ b/drivers/gpio/gpio-sch.c @@ -0,0 +1,239 @@ +/* + * GPIO interface for Intel Poulsbo SCH + * + * Copyright (c) 2010 CompuLab Ltd + * Author: Denis Turischev <denis@compulab.co.il> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/acpi.h> +#include <linux/platform_device.h> +#include <linux/pci_ids.h> +#include <linux/gpio/driver.h> + +#define GEN 0x00 +#define GIO 0x04 +#define GLV 0x08 + +struct sch_gpio { + struct gpio_chip chip; + spinlock_t lock; + unsigned short iobase; + unsigned short core_base; + unsigned short resume_base; +}; + +static unsigned sch_gpio_offset(struct sch_gpio *sch, unsigned gpio, + unsigned reg) +{ + unsigned base = 0; + + if (gpio >= sch->resume_base) { + gpio -= sch->resume_base; + base += 0x20; + } + + return base + reg + gpio / 8; +} + +static unsigned sch_gpio_bit(struct sch_gpio *sch, unsigned gpio) +{ + if (gpio >= sch->resume_base) + gpio -= sch->resume_base; + return gpio % 8; +} + +static int sch_gpio_reg_get(struct sch_gpio *sch, unsigned gpio, unsigned reg) +{ + unsigned short offset, bit; + u8 reg_val; + + offset = sch_gpio_offset(sch, gpio, reg); + bit = sch_gpio_bit(sch, gpio); + + reg_val = !!(inb(sch->iobase + offset) & BIT(bit)); + + return reg_val; +} + +static void sch_gpio_reg_set(struct sch_gpio *sch, unsigned gpio, unsigned reg, + int val) +{ + unsigned short offset, bit; + u8 reg_val; + + offset = sch_gpio_offset(sch, gpio, reg); + bit = sch_gpio_bit(sch, gpio); + + reg_val = inb(sch->iobase + offset); + + if (val) + outb(reg_val | BIT(bit), sch->iobase + offset); + else + outb((reg_val & ~BIT(bit)), sch->iobase + offset); +} + +static int sch_gpio_direction_in(struct gpio_chip *gc, unsigned gpio_num) +{ + struct sch_gpio *sch = gpiochip_get_data(gc); + + spin_lock(&sch->lock); + sch_gpio_reg_set(sch, gpio_num, GIO, 1); + spin_unlock(&sch->lock); + return 0; +} + +static int sch_gpio_get(struct gpio_chip *gc, unsigned gpio_num) +{ + struct sch_gpio *sch = gpiochip_get_data(gc); + return sch_gpio_reg_get(sch, gpio_num, GLV); +} + +static void sch_gpio_set(struct gpio_chip *gc, unsigned gpio_num, int val) +{ + struct sch_gpio *sch = gpiochip_get_data(gc); + + spin_lock(&sch->lock); + sch_gpio_reg_set(sch, gpio_num, GLV, val); + spin_unlock(&sch->lock); +} + +static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned gpio_num, + int val) +{ + struct sch_gpio *sch = gpiochip_get_data(gc); + + spin_lock(&sch->lock); + sch_gpio_reg_set(sch, gpio_num, GIO, 0); + spin_unlock(&sch->lock); + + /* + * according to the datasheet, writing to the level register has no + * effect when GPIO is programmed as input. + * Actually the the level register is read-only when configured as input. + * Thus presetting the output level before switching to output is _NOT_ possible. + * Hence we set the level after configuring the GPIO as output. + * But we cannot prevent a short low pulse if direction is set to high + * and an external pull-up is connected. + */ + sch_gpio_set(gc, gpio_num, val); + return 0; +} + +static int sch_gpio_get_direction(struct gpio_chip *gc, unsigned gpio_num) +{ + struct sch_gpio *sch = gpiochip_get_data(gc); + + return sch_gpio_reg_get(sch, gpio_num, GIO); +} + +static const struct gpio_chip sch_gpio_chip = { + .label = "sch_gpio", + .owner = THIS_MODULE, + .direction_input = sch_gpio_direction_in, + .get = sch_gpio_get, + .direction_output = sch_gpio_direction_out, + .set = sch_gpio_set, + .get_direction = sch_gpio_get_direction, +}; + +static int sch_gpio_probe(struct platform_device *pdev) +{ + struct sch_gpio *sch; + struct resource *res; + + sch = devm_kzalloc(&pdev->dev, sizeof(*sch), GFP_KERNEL); + if (!sch) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!res) + return -EBUSY; + + if (!devm_request_region(&pdev->dev, res->start, resource_size(res), + pdev->name)) + return -EBUSY; + + spin_lock_init(&sch->lock); + sch->iobase = res->start; + sch->chip = sch_gpio_chip; + sch->chip.label = dev_name(&pdev->dev); + sch->chip.parent = &pdev->dev; + + switch (pdev->id) { + case PCI_DEVICE_ID_INTEL_SCH_LPC: + sch->core_base = 0; + sch->resume_base = 10; + sch->chip.ngpio = 14; + + /* + * GPIO[6:0] enabled by default + * GPIO7 is configured by the CMC as SLPIOVR + * Enable GPIO[9:8] core powered gpios explicitly + */ + sch_gpio_reg_set(sch, 8, GEN, 1); + sch_gpio_reg_set(sch, 9, GEN, 1); + /* + * SUS_GPIO[2:0] enabled by default + * Enable SUS_GPIO3 resume powered gpio explicitly + */ + sch_gpio_reg_set(sch, 13, GEN, 1); + break; + + case PCI_DEVICE_ID_INTEL_ITC_LPC: + sch->core_base = 0; + sch->resume_base = 5; + sch->chip.ngpio = 14; + break; + + case PCI_DEVICE_ID_INTEL_CENTERTON_ILB: + sch->core_base = 0; + sch->resume_base = 21; + sch->chip.ngpio = 30; + break; + + case PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB: + sch->core_base = 0; + sch->resume_base = 2; + sch->chip.ngpio = 8; + break; + + default: + return -ENODEV; + } + + platform_set_drvdata(pdev, sch); + + return devm_gpiochip_add_data(&pdev->dev, &sch->chip, sch); +} + +static struct platform_driver sch_gpio_driver = { + .driver = { + .name = "sch_gpio", + }, + .probe = sch_gpio_probe, +}; + +module_platform_driver(sch_gpio_driver); + +MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>"); +MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:sch_gpio"); diff --git a/drivers/gpio/gpio-sch311x.c b/drivers/gpio/gpio-sch311x.c new file mode 100644 index 000000000..5497f0a88 --- /dev/null +++ b/drivers/gpio/gpio-sch311x.c @@ -0,0 +1,472 @@ +/* + * GPIO driver for the SMSC SCH311x Super-I/O chips + * + * Copyright (C) 2013 Bruno Randolf <br1@einfach.org> + * + * SuperIO functions and chip detection: + * (c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio/driver.h> +#include <linux/bitops.h> +#include <linux/io.h> + +#define DRV_NAME "gpio-sch311x" + +#define SCH311X_GPIO_CONF_DIR BIT(0) +#define SCH311X_GPIO_CONF_INVERT BIT(1) +#define SCH311X_GPIO_CONF_OPEN_DRAIN BIT(7) + +#define SIO_CONFIG_KEY_ENTER 0x55 +#define SIO_CONFIG_KEY_EXIT 0xaa + +#define GP1 0x4b + +static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e }; + +static struct platform_device *sch311x_gpio_pdev; + +struct sch311x_pdev_data { /* platform device data */ + unsigned short runtime_reg; /* runtime register base address */ +}; + +struct sch311x_gpio_block { /* one GPIO block runtime data */ + struct gpio_chip chip; + unsigned short data_reg; /* from definition below */ + unsigned short *config_regs; /* pointer to definition below */ + unsigned short runtime_reg; /* runtime register */ + spinlock_t lock; /* lock for this GPIO block */ +}; + +struct sch311x_gpio_priv { /* driver private data */ + struct sch311x_gpio_block blocks[6]; +}; + +struct sch311x_gpio_block_def { /* register address definitions */ + unsigned short data_reg; + unsigned short config_regs[8]; + unsigned short base; +}; + +/* Note: some GPIOs are not available, these are marked with 0x00 */ + +static struct sch311x_gpio_block_def sch311x_gpio_blocks[] = { + { + .data_reg = 0x4b, /* GP1 */ + .config_regs = {0x23, 0x24, 0x25, 0x26, 0x27, 0x29, 0x2a, 0x2b}, + .base = 10, + }, + { + .data_reg = 0x4c, /* GP2 */ + .config_regs = {0x00, 0x2c, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x32}, + .base = 20, + }, + { + .data_reg = 0x4d, /* GP3 */ + .config_regs = {0x33, 0x34, 0x35, 0x36, 0x37, 0x00, 0x39, 0x3a}, + .base = 30, + }, + { + .data_reg = 0x4e, /* GP4 */ + .config_regs = {0x3b, 0x00, 0x3d, 0x00, 0x6e, 0x6f, 0x72, 0x73}, + .base = 40, + }, + { + .data_reg = 0x4f, /* GP5 */ + .config_regs = {0x3f, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46}, + .base = 50, + }, + { + .data_reg = 0x50, /* GP6 */ + .config_regs = {0x47, 0x48, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59}, + .base = 60, + }, +}; + +/* + * Super-IO functions + */ + +static inline int sch311x_sio_enter(int sio_config_port) +{ + /* Don't step on other drivers' I/O space by accident. */ + if (!request_muxed_region(sio_config_port, 2, DRV_NAME)) { + pr_err(DRV_NAME "I/O address 0x%04x already in use\n", + sio_config_port); + return -EBUSY; + } + + outb(SIO_CONFIG_KEY_ENTER, sio_config_port); + return 0; +} + +static inline void sch311x_sio_exit(int sio_config_port) +{ + outb(SIO_CONFIG_KEY_EXIT, sio_config_port); + release_region(sio_config_port, 2); +} + +static inline int sch311x_sio_inb(int sio_config_port, int reg) +{ + outb(reg, sio_config_port); + return inb(sio_config_port + 1); +} + +static inline void sch311x_sio_outb(int sio_config_port, int reg, int val) +{ + outb(reg, sio_config_port); + outb(val, sio_config_port + 1); +} + + +/* + * GPIO functions + */ + +static int sch311x_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct sch311x_gpio_block *block = gpiochip_get_data(chip); + + if (block->config_regs[offset] == 0) /* GPIO is not available */ + return -ENODEV; + + if (!request_region(block->runtime_reg + block->config_regs[offset], + 1, DRV_NAME)) { + dev_err(chip->parent, "Failed to request region 0x%04x.\n", + block->runtime_reg + block->config_regs[offset]); + return -EBUSY; + } + return 0; +} + +static void sch311x_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct sch311x_gpio_block *block = gpiochip_get_data(chip); + + if (block->config_regs[offset] == 0) /* GPIO is not available */ + return; + + release_region(block->runtime_reg + block->config_regs[offset], 1); +} + +static int sch311x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct sch311x_gpio_block *block = gpiochip_get_data(chip); + u8 data; + + spin_lock(&block->lock); + data = inb(block->runtime_reg + block->data_reg); + spin_unlock(&block->lock); + + return !!(data & BIT(offset)); +} + +static void __sch311x_gpio_set(struct sch311x_gpio_block *block, + unsigned offset, int value) +{ + u8 data = inb(block->runtime_reg + block->data_reg); + if (value) + data |= BIT(offset); + else + data &= ~BIT(offset); + outb(data, block->runtime_reg + block->data_reg); +} + +static void sch311x_gpio_set(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct sch311x_gpio_block *block = gpiochip_get_data(chip); + + spin_lock(&block->lock); + __sch311x_gpio_set(block, offset, value); + spin_unlock(&block->lock); +} + +static int sch311x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct sch311x_gpio_block *block = gpiochip_get_data(chip); + u8 data; + + spin_lock(&block->lock); + data = inb(block->runtime_reg + block->config_regs[offset]); + data |= SCH311X_GPIO_CONF_DIR; + outb(data, block->runtime_reg + block->config_regs[offset]); + spin_unlock(&block->lock); + + return 0; +} + +static int sch311x_gpio_direction_out(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct sch311x_gpio_block *block = gpiochip_get_data(chip); + u8 data; + + spin_lock(&block->lock); + + data = inb(block->runtime_reg + block->config_regs[offset]); + data &= ~SCH311X_GPIO_CONF_DIR; + outb(data, block->runtime_reg + block->config_regs[offset]); + __sch311x_gpio_set(block, offset, value); + + spin_unlock(&block->lock); + return 0; +} + +static int sch311x_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct sch311x_gpio_block *block = gpiochip_get_data(chip); + u8 data; + + spin_lock(&block->lock); + data = inb(block->runtime_reg + block->config_regs[offset]); + spin_unlock(&block->lock); + + return !!(data & SCH311X_GPIO_CONF_DIR); +} + +static int sch311x_gpio_set_config(struct gpio_chip *chip, unsigned offset, + unsigned long config) +{ + struct sch311x_gpio_block *block = gpiochip_get_data(chip); + enum pin_config_param param = pinconf_to_config_param(config); + u8 data; + + switch (param) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + spin_lock(&block->lock); + data = inb(block->runtime_reg + block->config_regs[offset]); + data |= SCH311X_GPIO_CONF_OPEN_DRAIN; + outb(data, block->runtime_reg + block->config_regs[offset]); + spin_unlock(&block->lock); + return 0; + case PIN_CONFIG_DRIVE_PUSH_PULL: + spin_lock(&block->lock); + data = inb(block->runtime_reg + block->config_regs[offset]); + data &= ~SCH311X_GPIO_CONF_OPEN_DRAIN; + outb(data, block->runtime_reg + block->config_regs[offset]); + spin_unlock(&block->lock); + return 0; + default: + break; + } + return -ENOTSUPP; +} + +static int sch311x_gpio_probe(struct platform_device *pdev) +{ + struct sch311x_pdev_data *pdata = dev_get_platdata(&pdev->dev); + struct sch311x_gpio_priv *priv; + struct sch311x_gpio_block *block; + int err, i; + + /* we can register all GPIO data registers at once */ + if (!devm_request_region(&pdev->dev, pdata->runtime_reg + GP1, 6, + DRV_NAME)) { + dev_err(&pdev->dev, "Failed to request region 0x%04x-0x%04x.\n", + pdata->runtime_reg + GP1, pdata->runtime_reg + GP1 + 5); + return -EBUSY; + } + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + + for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) { + block = &priv->blocks[i]; + + spin_lock_init(&block->lock); + + block->chip.label = DRV_NAME; + block->chip.owner = THIS_MODULE; + block->chip.request = sch311x_gpio_request; + block->chip.free = sch311x_gpio_free; + block->chip.direction_input = sch311x_gpio_direction_in; + block->chip.direction_output = sch311x_gpio_direction_out; + block->chip.get_direction = sch311x_gpio_get_direction; + block->chip.set_config = sch311x_gpio_set_config; + block->chip.get = sch311x_gpio_get; + block->chip.set = sch311x_gpio_set; + block->chip.ngpio = 8; + block->chip.parent = &pdev->dev; + block->chip.base = sch311x_gpio_blocks[i].base; + block->config_regs = sch311x_gpio_blocks[i].config_regs; + block->data_reg = sch311x_gpio_blocks[i].data_reg; + block->runtime_reg = pdata->runtime_reg; + + err = gpiochip_add_data(&block->chip, block); + if (err < 0) { + dev_err(&pdev->dev, + "Could not register gpiochip, %d\n", err); + goto exit_err; + } + dev_info(&pdev->dev, + "SMSC SCH311x GPIO block %d registered.\n", i); + } + + return 0; + +exit_err: + /* release already registered chips */ + for (--i; i >= 0; i--) + gpiochip_remove(&priv->blocks[i].chip); + return err; +} + +static int sch311x_gpio_remove(struct platform_device *pdev) +{ + struct sch311x_gpio_priv *priv = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) { + gpiochip_remove(&priv->blocks[i].chip); + dev_info(&pdev->dev, + "SMSC SCH311x GPIO block %d unregistered.\n", i); + } + return 0; +} + +static struct platform_driver sch311x_gpio_driver = { + .driver.name = DRV_NAME, + .probe = sch311x_gpio_probe, + .remove = sch311x_gpio_remove, +}; + + +/* + * Init & exit routines + */ + +static int __init sch311x_detect(int sio_config_port, unsigned short *addr) +{ + int err = 0, reg; + unsigned short base_addr; + u8 dev_id; + + err = sch311x_sio_enter(sio_config_port); + if (err) + return err; + + /* Check device ID. */ + reg = sch311x_sio_inb(sio_config_port, 0x20); + switch (reg) { + case 0x7c: /* SCH3112 */ + dev_id = 2; + break; + case 0x7d: /* SCH3114 */ + dev_id = 4; + break; + case 0x7f: /* SCH3116 */ + dev_id = 6; + break; + default: + err = -ENODEV; + goto exit; + } + + /* Select logical device A (runtime registers) */ + sch311x_sio_outb(sio_config_port, 0x07, 0x0a); + + /* Check if Logical Device Register is currently active */ + if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0) + pr_info("Seems that LDN 0x0a is not active...\n"); + + /* Get the base address of the runtime registers */ + base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) | + sch311x_sio_inb(sio_config_port, 0x61); + if (!base_addr) { + pr_err("Base address not set\n"); + err = -ENODEV; + goto exit; + } + *addr = base_addr; + + pr_info("Found an SMSC SCH311%d chip at 0x%04x\n", dev_id, base_addr); + +exit: + sch311x_sio_exit(sio_config_port); + return err; +} + +static int __init sch311x_gpio_pdev_add(const unsigned short addr) +{ + struct sch311x_pdev_data pdata; + int err; + + pdata.runtime_reg = addr; + + sch311x_gpio_pdev = platform_device_alloc(DRV_NAME, -1); + if (!sch311x_gpio_pdev) + return -ENOMEM; + + err = platform_device_add_data(sch311x_gpio_pdev, + &pdata, sizeof(pdata)); + if (err) { + pr_err(DRV_NAME "Platform data allocation failed\n"); + goto err; + } + + err = platform_device_add(sch311x_gpio_pdev); + if (err) { + pr_err(DRV_NAME "Device addition failed\n"); + goto err; + } + return 0; + +err: + platform_device_put(sch311x_gpio_pdev); + return err; +} + +static int __init sch311x_gpio_init(void) +{ + int err, i; + unsigned short addr = 0; + + for (i = 0; i < ARRAY_SIZE(sch311x_ioports); i++) + if (sch311x_detect(sch311x_ioports[i], &addr) == 0) + break; + + if (!addr) + return -ENODEV; + + err = platform_driver_register(&sch311x_gpio_driver); + if (err) + return err; + + err = sch311x_gpio_pdev_add(addr); + if (err) + goto unreg_platform_driver; + + return 0; + +unreg_platform_driver: + platform_driver_unregister(&sch311x_gpio_driver); + return err; +} + +static void __exit sch311x_gpio_exit(void) +{ + platform_device_unregister(sch311x_gpio_pdev); + platform_driver_unregister(&sch311x_gpio_driver); +} + +module_init(sch311x_gpio_init); +module_exit(sch311x_gpio_exit); + +MODULE_AUTHOR("Bruno Randolf <br1@einfach.org>"); +MODULE_DESCRIPTION("SMSC SCH311x GPIO Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio-sch311x"); diff --git a/drivers/gpio/gpio-sodaville.c b/drivers/gpio/gpio-sodaville.c new file mode 100644 index 000000000..f60da8334 --- /dev/null +++ b/drivers/gpio/gpio-sodaville.c @@ -0,0 +1,268 @@ +/* + * GPIO interface for Intel Sodaville SoCs. + * + * Copyright (c) 2010, 2011 Intel Corporation + * + * Author: Hans J. Koch <hjk@linutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License 2 as published + * by the Free Software Foundation. + * + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/of_irq.h> +#include <linux/gpio/driver.h> + +#define DRV_NAME "sdv_gpio" +#define SDV_NUM_PUB_GPIOS 12 +#define PCI_DEVICE_ID_SDV_GPIO 0x2e67 +#define GPIO_BAR 0 + +#define GPOUTR 0x00 +#define GPOER 0x04 +#define GPINR 0x08 + +#define GPSTR 0x0c +#define GPIT1R0 0x10 +#define GPIO_INT 0x14 +#define GPIT1R1 0x18 + +#define GPMUXCTL 0x1c + +struct sdv_gpio_chip_data { + int irq_base; + void __iomem *gpio_pub_base; + struct irq_domain *id; + struct irq_chip_generic *gc; + struct gpio_chip chip; +}; + +static int sdv_gpio_pub_set_type(struct irq_data *d, unsigned int type) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct sdv_gpio_chip_data *sd = gc->private; + void __iomem *type_reg; + u32 reg; + + if (d->hwirq < 8) + type_reg = sd->gpio_pub_base + GPIT1R0; + else + type_reg = sd->gpio_pub_base + GPIT1R1; + + reg = readl(type_reg); + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + reg &= ~BIT(4 * (d->hwirq % 8)); + break; + + case IRQ_TYPE_LEVEL_LOW: + reg |= BIT(4 * (d->hwirq % 8)); + break; + + default: + return -EINVAL; + } + + writel(reg, type_reg); + return 0; +} + +static irqreturn_t sdv_gpio_pub_irq_handler(int irq, void *data) +{ + struct sdv_gpio_chip_data *sd = data; + u32 irq_stat = readl(sd->gpio_pub_base + GPSTR); + + irq_stat &= readl(sd->gpio_pub_base + GPIO_INT); + if (!irq_stat) + return IRQ_NONE; + + while (irq_stat) { + u32 irq_bit = __fls(irq_stat); + + irq_stat &= ~BIT(irq_bit); + generic_handle_irq(irq_find_mapping(sd->id, irq_bit)); + } + + return IRQ_HANDLED; +} + +static int sdv_xlate(struct irq_domain *h, struct device_node *node, + const u32 *intspec, u32 intsize, irq_hw_number_t *out_hwirq, + u32 *out_type) +{ + u32 line, type; + + if (node != irq_domain_get_of_node(h)) + return -EINVAL; + + if (intsize < 2) + return -EINVAL; + + line = *intspec; + *out_hwirq = line; + + intspec++; + type = *intspec; + + switch (type) { + case IRQ_TYPE_LEVEL_LOW: + case IRQ_TYPE_LEVEL_HIGH: + *out_type = type; + break; + default: + return -EINVAL; + } + return 0; +} + +static const struct irq_domain_ops irq_domain_sdv_ops = { + .xlate = sdv_xlate, +}; + +static int sdv_register_irqsupport(struct sdv_gpio_chip_data *sd, + struct pci_dev *pdev) +{ + struct irq_chip_type *ct; + int ret; + + sd->irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, + SDV_NUM_PUB_GPIOS, -1); + if (sd->irq_base < 0) + return sd->irq_base; + + /* mask + ACK all interrupt sources */ + writel(0, sd->gpio_pub_base + GPIO_INT); + writel((1 << 11) - 1, sd->gpio_pub_base + GPSTR); + + ret = devm_request_irq(&pdev->dev, pdev->irq, + sdv_gpio_pub_irq_handler, IRQF_SHARED, + "sdv_gpio", sd); + if (ret) + return ret; + + /* + * This gpio irq controller latches level irqs. Testing shows that if + * we unmask & ACK the IRQ before the source of the interrupt is gone + * then the interrupt is active again. + */ + sd->gc = irq_alloc_generic_chip("sdv-gpio", 1, sd->irq_base, + sd->gpio_pub_base, handle_fasteoi_irq); + if (!sd->gc) + return -ENOMEM; + + sd->gc->private = sd; + ct = sd->gc->chip_types; + ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; + ct->regs.eoi = GPSTR; + ct->regs.mask = GPIO_INT; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->chip.irq_eoi = irq_gc_eoi; + ct->chip.irq_set_type = sdv_gpio_pub_set_type; + + irq_setup_generic_chip(sd->gc, IRQ_MSK(SDV_NUM_PUB_GPIOS), + IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, + IRQ_LEVEL | IRQ_NOPROBE); + + sd->id = irq_domain_add_legacy(pdev->dev.of_node, SDV_NUM_PUB_GPIOS, + sd->irq_base, 0, &irq_domain_sdv_ops, sd); + if (!sd->id) + return -ENODEV; + + return 0; +} + +static int sdv_gpio_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_id) +{ + struct sdv_gpio_chip_data *sd; + unsigned long addr; + const void *prop; + int len; + int ret; + u32 mux_val; + + sd = kzalloc(sizeof(struct sdv_gpio_chip_data), GFP_KERNEL); + if (!sd) + return -ENOMEM; + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "can't enable device.\n"); + goto done; + } + + ret = pci_request_region(pdev, GPIO_BAR, DRV_NAME); + if (ret) { + dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR); + goto disable_pci; + } + + addr = pci_resource_start(pdev, GPIO_BAR); + if (!addr) { + ret = -ENODEV; + goto release_reg; + } + sd->gpio_pub_base = ioremap(addr, pci_resource_len(pdev, GPIO_BAR)); + + prop = of_get_property(pdev->dev.of_node, "intel,muxctl", &len); + if (prop && len == 4) { + mux_val = of_read_number(prop, 1); + writel(mux_val, sd->gpio_pub_base + GPMUXCTL); + } + + ret = bgpio_init(&sd->chip, &pdev->dev, 4, + sd->gpio_pub_base + GPINR, sd->gpio_pub_base + GPOUTR, + NULL, sd->gpio_pub_base + GPOER, NULL, 0); + if (ret) + goto unmap; + sd->chip.ngpio = SDV_NUM_PUB_GPIOS; + + ret = gpiochip_add_data(&sd->chip, sd); + if (ret < 0) { + dev_err(&pdev->dev, "gpiochip_add() failed.\n"); + goto unmap; + } + + ret = sdv_register_irqsupport(sd, pdev); + if (ret) + goto unmap; + + pci_set_drvdata(pdev, sd); + dev_info(&pdev->dev, "Sodaville GPIO driver registered.\n"); + return 0; + +unmap: + iounmap(sd->gpio_pub_base); +release_reg: + pci_release_region(pdev, GPIO_BAR); +disable_pci: + pci_disable_device(pdev); +done: + kfree(sd); + return ret; +} + +static const struct pci_device_id sdv_gpio_pci_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_SDV_GPIO) }, + { 0, }, +}; + +static struct pci_driver sdv_gpio_driver = { + .driver = { + .suppress_bind_attrs = true, + }, + .name = DRV_NAME, + .id_table = sdv_gpio_pci_ids, + .probe = sdv_gpio_probe, +}; +builtin_pci_driver(sdv_gpio_driver); diff --git a/drivers/gpio/gpio-spear-spics.c b/drivers/gpio/gpio-spear-spics.c new file mode 100644 index 000000000..ee3039f09 --- /dev/null +++ b/drivers/gpio/gpio-spear-spics.c @@ -0,0 +1,199 @@ +/* + * SPEAr platform SPI chipselect abstraction over gpiolib + * + * Copyright (C) 2012 ST Microelectronics + * Shiraz Hashim <shiraz.linux.kernel@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/types.h> + +/* maximum chipselects */ +#define NUM_OF_GPIO 4 + +/* + * Provision is available on some SPEAr SoCs to control ARM PL022 spi cs + * through system registers. This register lies outside spi (pl022) + * address space into system registers. + * + * It provides control for spi chip select lines so that any chipselect + * (out of 4 possible chipselects in pl022) can be made low to select + * the particular slave. + */ + +/** + * struct spear_spics - represents spi chip select control + * @base: base address + * @perip_cfg: configuration register + * @sw_enable_bit: bit to enable s/w control over chipselects + * @cs_value_bit: bit to program high or low chipselect + * @cs_enable_mask: mask to select bits required to select chipselect + * @cs_enable_shift: bit pos of cs_enable_mask + * @use_count: use count of a spi controller cs lines + * @last_off: stores last offset caller of set_value() + * @chip: gpio_chip abstraction + */ +struct spear_spics { + void __iomem *base; + u32 perip_cfg; + u32 sw_enable_bit; + u32 cs_value_bit; + u32 cs_enable_mask; + u32 cs_enable_shift; + unsigned long use_count; + int last_off; + struct gpio_chip chip; +}; + +/* gpio framework specific routines */ +static int spics_get_value(struct gpio_chip *chip, unsigned offset) +{ + return -ENXIO; +} + +static void spics_set_value(struct gpio_chip *chip, unsigned offset, int value) +{ + struct spear_spics *spics = gpiochip_get_data(chip); + u32 tmp; + + /* select chip select from register */ + tmp = readl_relaxed(spics->base + spics->perip_cfg); + if (spics->last_off != offset) { + spics->last_off = offset; + tmp &= ~(spics->cs_enable_mask << spics->cs_enable_shift); + tmp |= offset << spics->cs_enable_shift; + } + + /* toggle chip select line */ + tmp &= ~(0x1 << spics->cs_value_bit); + tmp |= value << spics->cs_value_bit; + writel_relaxed(tmp, spics->base + spics->perip_cfg); +} + +static int spics_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return -ENXIO; +} + +static int spics_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + spics_set_value(chip, offset, value); + return 0; +} + +static int spics_request(struct gpio_chip *chip, unsigned offset) +{ + struct spear_spics *spics = gpiochip_get_data(chip); + u32 tmp; + + if (!spics->use_count++) { + tmp = readl_relaxed(spics->base + spics->perip_cfg); + tmp |= 0x1 << spics->sw_enable_bit; + tmp |= 0x1 << spics->cs_value_bit; + writel_relaxed(tmp, spics->base + spics->perip_cfg); + } + + return 0; +} + +static void spics_free(struct gpio_chip *chip, unsigned offset) +{ + struct spear_spics *spics = gpiochip_get_data(chip); + u32 tmp; + + if (!--spics->use_count) { + tmp = readl_relaxed(spics->base + spics->perip_cfg); + tmp &= ~(0x1 << spics->sw_enable_bit); + writel_relaxed(tmp, spics->base + spics->perip_cfg); + } +} + +static int spics_gpio_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct spear_spics *spics; + struct resource *res; + int ret; + + spics = devm_kzalloc(&pdev->dev, sizeof(*spics), GFP_KERNEL); + if (!spics) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + spics->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(spics->base)) + return PTR_ERR(spics->base); + + if (of_property_read_u32(np, "st-spics,peripcfg-reg", + &spics->perip_cfg)) + goto err_dt_data; + if (of_property_read_u32(np, "st-spics,sw-enable-bit", + &spics->sw_enable_bit)) + goto err_dt_data; + if (of_property_read_u32(np, "st-spics,cs-value-bit", + &spics->cs_value_bit)) + goto err_dt_data; + if (of_property_read_u32(np, "st-spics,cs-enable-mask", + &spics->cs_enable_mask)) + goto err_dt_data; + if (of_property_read_u32(np, "st-spics,cs-enable-shift", + &spics->cs_enable_shift)) + goto err_dt_data; + + platform_set_drvdata(pdev, spics); + + spics->chip.ngpio = NUM_OF_GPIO; + spics->chip.base = -1; + spics->chip.request = spics_request; + spics->chip.free = spics_free; + spics->chip.direction_input = spics_direction_input; + spics->chip.direction_output = spics_direction_output; + spics->chip.get = spics_get_value; + spics->chip.set = spics_set_value; + spics->chip.label = dev_name(&pdev->dev); + spics->chip.parent = &pdev->dev; + spics->chip.owner = THIS_MODULE; + spics->last_off = -1; + + ret = devm_gpiochip_add_data(&pdev->dev, &spics->chip, spics); + if (ret) { + dev_err(&pdev->dev, "unable to add gpio chip\n"); + return ret; + } + + dev_info(&pdev->dev, "spear spics registered\n"); + return 0; + +err_dt_data: + dev_err(&pdev->dev, "DT probe failed\n"); + return -EINVAL; +} + +static const struct of_device_id spics_gpio_of_match[] = { + { .compatible = "st,spear-spics-gpio" }, + {} +}; + +static struct platform_driver spics_gpio_driver = { + .probe = spics_gpio_probe, + .driver = { + .name = "spear-spics-gpio", + .of_match_table = spics_gpio_of_match, + }, +}; + +static int __init spics_gpio_init(void) +{ + return platform_driver_register(&spics_gpio_driver); +} +subsys_initcall(spics_gpio_init); diff --git a/drivers/gpio/gpio-sprd.c b/drivers/gpio/gpio-sprd.c new file mode 100644 index 000000000..4d53347ad --- /dev/null +++ b/drivers/gpio/gpio-sprd.c @@ -0,0 +1,293 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Spreadtrum Communications Inc. + * Copyright (C) 2018 Linaro Ltd. + */ + +#include <linux/bitops.h> +#include <linux/gpio/driver.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> + +/* GPIO registers definition */ +#define SPRD_GPIO_DATA 0x0 +#define SPRD_GPIO_DMSK 0x4 +#define SPRD_GPIO_DIR 0x8 +#define SPRD_GPIO_IS 0xc +#define SPRD_GPIO_IBE 0x10 +#define SPRD_GPIO_IEV 0x14 +#define SPRD_GPIO_IE 0x18 +#define SPRD_GPIO_RIS 0x1c +#define SPRD_GPIO_MIS 0x20 +#define SPRD_GPIO_IC 0x24 +#define SPRD_GPIO_INEN 0x28 + +/* We have 16 banks GPIOs and each bank contain 16 GPIOs */ +#define SPRD_GPIO_BANK_NR 16 +#define SPRD_GPIO_NR 256 +#define SPRD_GPIO_BANK_SIZE 0x80 +#define SPRD_GPIO_BANK_MASK GENMASK(15, 0) +#define SPRD_GPIO_BIT(x) ((x) & (SPRD_GPIO_BANK_NR - 1)) + +struct sprd_gpio { + struct gpio_chip chip; + void __iomem *base; + spinlock_t lock; + int irq; +}; + +static inline void __iomem *sprd_gpio_bank_base(struct sprd_gpio *sprd_gpio, + unsigned int bank) +{ + return sprd_gpio->base + SPRD_GPIO_BANK_SIZE * bank; +} + +static void sprd_gpio_update(struct gpio_chip *chip, unsigned int offset, + u16 reg, int val) +{ + struct sprd_gpio *sprd_gpio = gpiochip_get_data(chip); + void __iomem *base = sprd_gpio_bank_base(sprd_gpio, + offset / SPRD_GPIO_BANK_NR); + unsigned long flags; + u32 tmp; + + spin_lock_irqsave(&sprd_gpio->lock, flags); + tmp = readl_relaxed(base + reg); + + if (val) + tmp |= BIT(SPRD_GPIO_BIT(offset)); + else + tmp &= ~BIT(SPRD_GPIO_BIT(offset)); + + writel_relaxed(tmp, base + reg); + spin_unlock_irqrestore(&sprd_gpio->lock, flags); +} + +static int sprd_gpio_read(struct gpio_chip *chip, unsigned int offset, u16 reg) +{ + struct sprd_gpio *sprd_gpio = gpiochip_get_data(chip); + void __iomem *base = sprd_gpio_bank_base(sprd_gpio, + offset / SPRD_GPIO_BANK_NR); + + return !!(readl_relaxed(base + reg) & BIT(SPRD_GPIO_BIT(offset))); +} + +static int sprd_gpio_request(struct gpio_chip *chip, unsigned int offset) +{ + sprd_gpio_update(chip, offset, SPRD_GPIO_DMSK, 1); + return 0; +} + +static void sprd_gpio_free(struct gpio_chip *chip, unsigned int offset) +{ + sprd_gpio_update(chip, offset, SPRD_GPIO_DMSK, 0); +} + +static int sprd_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + sprd_gpio_update(chip, offset, SPRD_GPIO_DIR, 0); + sprd_gpio_update(chip, offset, SPRD_GPIO_INEN, 1); + return 0; +} + +static int sprd_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + sprd_gpio_update(chip, offset, SPRD_GPIO_DIR, 1); + sprd_gpio_update(chip, offset, SPRD_GPIO_INEN, 0); + sprd_gpio_update(chip, offset, SPRD_GPIO_DATA, value); + return 0; +} + +static int sprd_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + return sprd_gpio_read(chip, offset, SPRD_GPIO_DATA); +} + +static void sprd_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + sprd_gpio_update(chip, offset, SPRD_GPIO_DATA, value); +} + +static void sprd_gpio_irq_mask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + u32 offset = irqd_to_hwirq(data); + + sprd_gpio_update(chip, offset, SPRD_GPIO_IE, 0); +} + +static void sprd_gpio_irq_ack(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + u32 offset = irqd_to_hwirq(data); + + sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1); +} + +static void sprd_gpio_irq_unmask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + u32 offset = irqd_to_hwirq(data); + + sprd_gpio_update(chip, offset, SPRD_GPIO_IE, 1); +} + +static int sprd_gpio_irq_set_type(struct irq_data *data, + unsigned int flow_type) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + u32 offset = irqd_to_hwirq(data); + + switch (flow_type) { + case IRQ_TYPE_EDGE_RISING: + sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0); + sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 0); + sprd_gpio_update(chip, offset, SPRD_GPIO_IEV, 1); + sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1); + irq_set_handler_locked(data, handle_edge_irq); + break; + case IRQ_TYPE_EDGE_FALLING: + sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0); + sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 0); + sprd_gpio_update(chip, offset, SPRD_GPIO_IEV, 0); + sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1); + irq_set_handler_locked(data, handle_edge_irq); + break; + case IRQ_TYPE_EDGE_BOTH: + sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0); + sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 1); + sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1); + irq_set_handler_locked(data, handle_edge_irq); + break; + case IRQ_TYPE_LEVEL_HIGH: + sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 1); + sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 0); + sprd_gpio_update(chip, offset, SPRD_GPIO_IEV, 1); + irq_set_handler_locked(data, handle_level_irq); + break; + case IRQ_TYPE_LEVEL_LOW: + sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 1); + sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 0); + sprd_gpio_update(chip, offset, SPRD_GPIO_IEV, 0); + irq_set_handler_locked(data, handle_level_irq); + break; + default: + return -EINVAL; + } + + return 0; +} + +static void sprd_gpio_irq_handler(struct irq_desc *desc) +{ + struct gpio_chip *chip = irq_desc_get_handler_data(desc); + struct irq_chip *ic = irq_desc_get_chip(desc); + struct sprd_gpio *sprd_gpio = gpiochip_get_data(chip); + u32 bank, n, girq; + + chained_irq_enter(ic, desc); + + for (bank = 0; bank * SPRD_GPIO_BANK_NR < chip->ngpio; bank++) { + void __iomem *base = sprd_gpio_bank_base(sprd_gpio, bank); + unsigned long reg = readl_relaxed(base + SPRD_GPIO_MIS) & + SPRD_GPIO_BANK_MASK; + + for_each_set_bit(n, ®, SPRD_GPIO_BANK_NR) { + girq = irq_find_mapping(chip->irq.domain, + bank * SPRD_GPIO_BANK_NR + n); + + generic_handle_irq(girq); + } + + } + chained_irq_exit(ic, desc); +} + +static struct irq_chip sprd_gpio_irqchip = { + .name = "sprd-gpio", + .irq_ack = sprd_gpio_irq_ack, + .irq_mask = sprd_gpio_irq_mask, + .irq_unmask = sprd_gpio_irq_unmask, + .irq_set_type = sprd_gpio_irq_set_type, + .flags = IRQCHIP_SKIP_SET_WAKE, +}; + +static int sprd_gpio_probe(struct platform_device *pdev) +{ + struct gpio_irq_chip *irq; + struct sprd_gpio *sprd_gpio; + struct resource *res; + int ret; + + sprd_gpio = devm_kzalloc(&pdev->dev, sizeof(*sprd_gpio), GFP_KERNEL); + if (!sprd_gpio) + return -ENOMEM; + + sprd_gpio->irq = platform_get_irq(pdev, 0); + if (sprd_gpio->irq < 0) { + dev_err(&pdev->dev, "Failed to get GPIO interrupt.\n"); + return sprd_gpio->irq; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sprd_gpio->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(sprd_gpio->base)) + return PTR_ERR(sprd_gpio->base); + + spin_lock_init(&sprd_gpio->lock); + + sprd_gpio->chip.label = dev_name(&pdev->dev); + sprd_gpio->chip.ngpio = SPRD_GPIO_NR; + sprd_gpio->chip.base = -1; + sprd_gpio->chip.parent = &pdev->dev; + sprd_gpio->chip.of_node = pdev->dev.of_node; + sprd_gpio->chip.request = sprd_gpio_request; + sprd_gpio->chip.free = sprd_gpio_free; + sprd_gpio->chip.get = sprd_gpio_get; + sprd_gpio->chip.set = sprd_gpio_set; + sprd_gpio->chip.direction_input = sprd_gpio_direction_input; + sprd_gpio->chip.direction_output = sprd_gpio_direction_output; + + irq = &sprd_gpio->chip.irq; + irq->chip = &sprd_gpio_irqchip; + irq->handler = handle_bad_irq; + irq->default_type = IRQ_TYPE_NONE; + irq->parent_handler = sprd_gpio_irq_handler; + irq->parent_handler_data = sprd_gpio; + irq->num_parents = 1; + irq->parents = &sprd_gpio->irq; + + ret = devm_gpiochip_add_data(&pdev->dev, &sprd_gpio->chip, sprd_gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, sprd_gpio); + return 0; +} + +static const struct of_device_id sprd_gpio_of_match[] = { + { .compatible = "sprd,sc9860-gpio", }, + { /* end of list */ } +}; +MODULE_DEVICE_TABLE(of, sprd_gpio_of_match); + +static struct platform_driver sprd_gpio_driver = { + .probe = sprd_gpio_probe, + .driver = { + .name = "sprd-gpio", + .of_match_table = sprd_gpio_of_match, + }, +}; + +module_platform_driver_probe(sprd_gpio_driver, sprd_gpio_probe); + +MODULE_DESCRIPTION("Spreadtrum GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-sta2x11.c b/drivers/gpio/gpio-sta2x11.c new file mode 100644 index 000000000..2283c869a --- /dev/null +++ b/drivers/gpio/gpio-sta2x11.c @@ -0,0 +1,435 @@ +/* + * STMicroelectronics ConneXt (STA2X11) GPIO driver + * + * Copyright 2012 ST Microelectronics (Alessandro Rubini) + * Based on gpio-ml-ioh.c, Copyright 2010 OKI Semiconductors Ltd. + * Also based on previous sta2x11 work, Copyright 2011 Wind River Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/gpio/driver.h> +#include <linux/bitops.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/mfd/sta2x11-mfd.h> + +struct gsta_regs { + u32 dat; /* 0x00 */ + u32 dats; + u32 datc; + u32 pdis; + u32 dir; /* 0x10 */ + u32 dirs; + u32 dirc; + u32 unused_1c; + u32 afsela; /* 0x20 */ + u32 unused_24[7]; + u32 rimsc; /* 0x40 */ + u32 fimsc; + u32 is; + u32 ic; +}; + +struct gsta_gpio { + spinlock_t lock; + struct device *dev; + void __iomem *reg_base; + struct gsta_regs __iomem *regs[GSTA_NR_BLOCKS]; + struct gpio_chip gpio; + int irq_base; + /* FIXME: save the whole config here (AF, ...) */ + unsigned irq_type[GSTA_NR_GPIO]; +}; + +/* + * gpio methods + */ + +static void gsta_gpio_set(struct gpio_chip *gpio, unsigned nr, int val) +{ + struct gsta_gpio *chip = gpiochip_get_data(gpio); + struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK]; + u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK); + + if (val) + writel(bit, ®s->dats); + else + writel(bit, ®s->datc); +} + +static int gsta_gpio_get(struct gpio_chip *gpio, unsigned nr) +{ + struct gsta_gpio *chip = gpiochip_get_data(gpio); + struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK]; + u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK); + + return !!(readl(®s->dat) & bit); +} + +static int gsta_gpio_direction_output(struct gpio_chip *gpio, unsigned nr, + int val) +{ + struct gsta_gpio *chip = gpiochip_get_data(gpio); + struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK]; + u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK); + + writel(bit, ®s->dirs); + /* Data register after direction, otherwise pullup/down is selected */ + if (val) + writel(bit, ®s->dats); + else + writel(bit, ®s->datc); + return 0; +} + +static int gsta_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) +{ + struct gsta_gpio *chip = gpiochip_get_data(gpio); + struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK]; + u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK); + + writel(bit, ®s->dirc); + return 0; +} + +static int gsta_gpio_to_irq(struct gpio_chip *gpio, unsigned offset) +{ + struct gsta_gpio *chip = gpiochip_get_data(gpio); + return chip->irq_base + offset; +} + +static void gsta_gpio_setup(struct gsta_gpio *chip) /* called from probe */ +{ + struct gpio_chip *gpio = &chip->gpio; + + /* + * ARCH_NR_GPIOS is currently 256 and dynamic allocation starts + * from the end. However, for compatibility, we need the first + * ConneXt device to start from gpio 0: it's the main chipset + * on most boards so documents and drivers assume gpio0..gpio127 + */ + static int gpio_base; + + gpio->label = dev_name(chip->dev); + gpio->owner = THIS_MODULE; + gpio->direction_input = gsta_gpio_direction_input; + gpio->get = gsta_gpio_get; + gpio->direction_output = gsta_gpio_direction_output; + gpio->set = gsta_gpio_set; + gpio->dbg_show = NULL; + gpio->base = gpio_base; + gpio->ngpio = GSTA_NR_GPIO; + gpio->can_sleep = false; + gpio->to_irq = gsta_gpio_to_irq; + + /* + * After the first device, turn to dynamic gpio numbers. + * For example, with ARCH_NR_GPIOS = 256 we can fit two cards + */ + if (!gpio_base) + gpio_base = -1; +} + +/* + * Special method: alternate functions and pullup/pulldown. This is only + * invoked on startup to configure gpio's according to platform data. + * FIXME : this functionality shall be managed (and exported to other drivers) + * via the pin control subsystem. + */ +static void gsta_set_config(struct gsta_gpio *chip, int nr, unsigned cfg) +{ + struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK]; + unsigned long flags; + u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK); + u32 val; + int err = 0; + + pr_info("%s: %p %i %i\n", __func__, chip, nr, cfg); + + if (cfg == PINMUX_TYPE_NONE) + return; + + /* Alternate function or not? */ + spin_lock_irqsave(&chip->lock, flags); + val = readl(®s->afsela); + if (cfg == PINMUX_TYPE_FUNCTION) + val |= bit; + else + val &= ~bit; + writel(val | bit, ®s->afsela); + if (cfg == PINMUX_TYPE_FUNCTION) { + spin_unlock_irqrestore(&chip->lock, flags); + return; + } + + /* not alternate function: set details */ + switch (cfg) { + case PINMUX_TYPE_OUTPUT_LOW: + writel(bit, ®s->dirs); + writel(bit, ®s->datc); + break; + case PINMUX_TYPE_OUTPUT_HIGH: + writel(bit, ®s->dirs); + writel(bit, ®s->dats); + break; + case PINMUX_TYPE_INPUT: + writel(bit, ®s->dirc); + val = readl(®s->pdis) | bit; + writel(val, ®s->pdis); + break; + case PINMUX_TYPE_INPUT_PULLUP: + writel(bit, ®s->dirc); + val = readl(®s->pdis) & ~bit; + writel(val, ®s->pdis); + writel(bit, ®s->dats); + break; + case PINMUX_TYPE_INPUT_PULLDOWN: + writel(bit, ®s->dirc); + val = readl(®s->pdis) & ~bit; + writel(val, ®s->pdis); + writel(bit, ®s->datc); + break; + default: + err = 1; + } + spin_unlock_irqrestore(&chip->lock, flags); + if (err) + pr_err("%s: chip %p, pin %i, cfg %i is invalid\n", + __func__, chip, nr, cfg); +} + +/* + * Irq methods + */ + +static void gsta_irq_disable(struct irq_data *data) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data); + struct gsta_gpio *chip = gc->private; + int nr = data->irq - chip->irq_base; + struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK]; + u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK); + u32 val; + unsigned long flags; + + spin_lock_irqsave(&chip->lock, flags); + if (chip->irq_type[nr] & IRQ_TYPE_EDGE_RISING) { + val = readl(®s->rimsc) & ~bit; + writel(val, ®s->rimsc); + } + if (chip->irq_type[nr] & IRQ_TYPE_EDGE_FALLING) { + val = readl(®s->fimsc) & ~bit; + writel(val, ®s->fimsc); + } + spin_unlock_irqrestore(&chip->lock, flags); + return; +} + +static void gsta_irq_enable(struct irq_data *data) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data); + struct gsta_gpio *chip = gc->private; + int nr = data->irq - chip->irq_base; + struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK]; + u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK); + u32 val; + int type; + unsigned long flags; + + type = chip->irq_type[nr]; + + spin_lock_irqsave(&chip->lock, flags); + val = readl(®s->rimsc); + if (type & IRQ_TYPE_EDGE_RISING) + writel(val | bit, ®s->rimsc); + else + writel(val & ~bit, ®s->rimsc); + val = readl(®s->rimsc); + if (type & IRQ_TYPE_EDGE_FALLING) + writel(val | bit, ®s->fimsc); + else + writel(val & ~bit, ®s->fimsc); + spin_unlock_irqrestore(&chip->lock, flags); + return; +} + +static int gsta_irq_type(struct irq_data *d, unsigned int type) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct gsta_gpio *chip = gc->private; + int nr = d->irq - chip->irq_base; + + /* We only support edge interrupts */ + if (!(type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))) { + pr_debug("%s: unsupported type 0x%x\n", __func__, type); + return -EINVAL; + } + + chip->irq_type[nr] = type; /* used for enable/disable */ + + gsta_irq_enable(d); + return 0; +} + +static irqreturn_t gsta_gpio_handler(int irq, void *dev_id) +{ + struct gsta_gpio *chip = dev_id; + struct gsta_regs __iomem *regs; + u32 is; + int i, nr, base; + irqreturn_t ret = IRQ_NONE; + + for (i = 0; i < GSTA_NR_BLOCKS; i++) { + regs = chip->regs[i]; + base = chip->irq_base + i * GSTA_GPIO_PER_BLOCK; + while ((is = readl(®s->is))) { + nr = __ffs(is); + irq = base + nr; + generic_handle_irq(irq); + writel(1 << nr, ®s->ic); + ret = IRQ_HANDLED; + } + } + return ret; +} + +static int gsta_alloc_irq_chip(struct gsta_gpio *chip) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + int rv; + + gc = devm_irq_alloc_generic_chip(chip->dev, KBUILD_MODNAME, 1, + chip->irq_base, + chip->reg_base, handle_simple_irq); + if (!gc) + return -ENOMEM; + + gc->private = chip; + ct = gc->chip_types; + + ct->chip.irq_set_type = gsta_irq_type; + ct->chip.irq_disable = gsta_irq_disable; + ct->chip.irq_enable = gsta_irq_enable; + + /* FIXME: this makes at most 32 interrupts. Request 0 by now */ + rv = devm_irq_setup_generic_chip(chip->dev, gc, + 0 /* IRQ_MSK(GSTA_GPIO_PER_BLOCK) */, + 0, IRQ_NOREQUEST | IRQ_NOPROBE, 0); + if (rv) + return rv; + + /* Set up all all 128 interrupts: code from setup_generic_chip */ + { + struct irq_chip_type *ct = gc->chip_types; + int i, j; + for (j = 0; j < GSTA_NR_GPIO; j++) { + i = chip->irq_base + j; + irq_set_chip_and_handler(i, &ct->chip, ct->handler); + irq_set_chip_data(i, gc); + irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE); + } + gc->irq_cnt = i - gc->irq_base; + } + + return 0; +} + +/* The platform device used here is instantiated by the MFD device */ +static int gsta_probe(struct platform_device *dev) +{ + int i, err; + struct pci_dev *pdev; + struct sta2x11_gpio_pdata *gpio_pdata; + struct gsta_gpio *chip; + struct resource *res; + + pdev = *(struct pci_dev **)dev_get_platdata(&dev->dev); + gpio_pdata = dev_get_platdata(&pdev->dev); + + if (gpio_pdata == NULL) + dev_err(&dev->dev, "no gpio config\n"); + pr_debug("gpio config: %p\n", gpio_pdata); + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + + chip = devm_kzalloc(&dev->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + chip->dev = &dev->dev; + chip->reg_base = devm_ioremap_resource(&dev->dev, res); + if (IS_ERR(chip->reg_base)) + return PTR_ERR(chip->reg_base); + + for (i = 0; i < GSTA_NR_BLOCKS; i++) { + chip->regs[i] = chip->reg_base + i * 4096; + /* disable all irqs */ + writel(0, &chip->regs[i]->rimsc); + writel(0, &chip->regs[i]->fimsc); + writel(~0, &chip->regs[i]->ic); + } + spin_lock_init(&chip->lock); + gsta_gpio_setup(chip); + if (gpio_pdata) + for (i = 0; i < GSTA_NR_GPIO; i++) + gsta_set_config(chip, i, gpio_pdata->pinconfig[i]); + + /* 384 was used in previous code: be compatible for other drivers */ + err = devm_irq_alloc_descs(&dev->dev, -1, 384, + GSTA_NR_GPIO, NUMA_NO_NODE); + if (err < 0) { + dev_warn(&dev->dev, "sta2x11 gpio: Can't get irq base (%i)\n", + -err); + return err; + } + chip->irq_base = err; + + err = gsta_alloc_irq_chip(chip); + if (err) + return err; + + err = devm_request_irq(&dev->dev, pdev->irq, gsta_gpio_handler, + IRQF_SHARED, KBUILD_MODNAME, chip); + if (err < 0) { + dev_err(&dev->dev, "sta2x11 gpio: Can't request irq (%i)\n", + -err); + return err; + } + + err = devm_gpiochip_add_data(&dev->dev, &chip->gpio, chip); + if (err < 0) { + dev_err(&dev->dev, "sta2x11 gpio: Can't register (%i)\n", + -err); + return err; + } + + platform_set_drvdata(dev, chip); + return 0; +} + +static struct platform_driver sta2x11_gpio_platform_driver = { + .driver = { + .name = "sta2x11-gpio", + .suppress_bind_attrs = true, + }, + .probe = gsta_probe, +}; +builtin_platform_driver(sta2x11_gpio_platform_driver); diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c new file mode 100644 index 000000000..65a2315f1 --- /dev/null +++ b/drivers/gpio/gpio-stmpe.c @@ -0,0 +1,538 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/of.h> +#include <linux/mfd/stmpe.h> +#include <linux/seq_file.h> +#include <linux/bitops.h> + +/* + * These registers are modified under the irq bus lock and cached to avoid + * unnecessary writes in bus_sync_unlock. + */ +enum { REG_RE, REG_FE, REG_IE }; + +enum { LSB, CSB, MSB }; + +#define CACHE_NR_REGS 3 +/* No variant has more than 24 GPIOs */ +#define CACHE_NR_BANKS (24 / 8) + +struct stmpe_gpio { + struct gpio_chip chip; + struct stmpe *stmpe; + struct device *dev; + struct mutex irq_lock; + u32 norequest_mask; + /* Caches of interrupt control registers for bus_lock */ + u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS]; + u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS]; +}; + +static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)]; + u8 mask = BIT(offset % 8); + int ret; + + ret = stmpe_reg_read(stmpe, reg); + if (ret < 0) + return ret; + + return !!(ret & mask); +} + +static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB; + u8 reg = stmpe->regs[which + (offset / 8)]; + u8 mask = BIT(offset % 8); + + /* + * Some variants have single register for gpio set/clear functionality. + * For them we need to write 0 to clear and 1 to set. + */ + if (stmpe->regs[STMPE_IDX_GPSR_LSB] == stmpe->regs[STMPE_IDX_GPCR_LSB]) + stmpe_set_bits(stmpe, reg, mask, val ? mask : 0); + else + stmpe_reg_write(stmpe, reg, mask); +} + +static int stmpe_gpio_get_direction(struct gpio_chip *chip, + unsigned offset) +{ + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); + u8 mask = BIT(offset % 8); + int ret; + + ret = stmpe_reg_read(stmpe, reg); + if (ret < 0) + return ret; + + return !(ret & mask); +} + +static int stmpe_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int val) +{ + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)]; + u8 mask = BIT(offset % 8); + + stmpe_gpio_set(chip, offset, val); + + return stmpe_set_bits(stmpe, reg, mask, mask); +} + +static int stmpe_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)]; + u8 mask = BIT(offset % 8); + + return stmpe_set_bits(stmpe, reg, mask, 0); +} + +static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + + if (stmpe_gpio->norequest_mask & BIT(offset)) + return -EINVAL; + + return stmpe_set_altfunc(stmpe, BIT(offset), STMPE_BLOCK_GPIO); +} + +static const struct gpio_chip template_chip = { + .label = "stmpe", + .owner = THIS_MODULE, + .get_direction = stmpe_gpio_get_direction, + .direction_input = stmpe_gpio_direction_input, + .get = stmpe_gpio_get, + .direction_output = stmpe_gpio_direction_output, + .set = stmpe_gpio_set, + .request = stmpe_gpio_request, + .can_sleep = true, +}; + +static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); + int offset = d->hwirq; + int regoffset = offset / 8; + int mask = BIT(offset % 8); + + if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH) + return -EINVAL; + + /* STMPE801 and STMPE 1600 don't have RE and FE registers */ + if (stmpe_gpio->stmpe->partnum == STMPE801 || + stmpe_gpio->stmpe->partnum == STMPE1600) + return 0; + + if (type & IRQ_TYPE_EDGE_RISING) + stmpe_gpio->regs[REG_RE][regoffset] |= mask; + else + stmpe_gpio->regs[REG_RE][regoffset] &= ~mask; + + if (type & IRQ_TYPE_EDGE_FALLING) + stmpe_gpio->regs[REG_FE][regoffset] |= mask; + else + stmpe_gpio->regs[REG_FE][regoffset] &= ~mask; + + return 0; +} + +static void stmpe_gpio_irq_lock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); + + mutex_lock(&stmpe_gpio->irq_lock); +} + +static void stmpe_gpio_irq_sync_unlock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); + struct stmpe *stmpe = stmpe_gpio->stmpe; + int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); + static const u8 regmap[CACHE_NR_REGS][CACHE_NR_BANKS] = { + [REG_RE][LSB] = STMPE_IDX_GPRER_LSB, + [REG_RE][CSB] = STMPE_IDX_GPRER_CSB, + [REG_RE][MSB] = STMPE_IDX_GPRER_MSB, + [REG_FE][LSB] = STMPE_IDX_GPFER_LSB, + [REG_FE][CSB] = STMPE_IDX_GPFER_CSB, + [REG_FE][MSB] = STMPE_IDX_GPFER_MSB, + [REG_IE][LSB] = STMPE_IDX_IEGPIOR_LSB, + [REG_IE][CSB] = STMPE_IDX_IEGPIOR_CSB, + [REG_IE][MSB] = STMPE_IDX_IEGPIOR_MSB, + }; + int i, j; + + /* + * STMPE1600: to be able to get IRQ from pins, + * a read must be done on GPMR register, or a write in + * GPSR or GPCR registers + */ + if (stmpe->partnum == STMPE1600) { + stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_LSB]); + stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_CSB]); + } + + for (i = 0; i < CACHE_NR_REGS; i++) { + /* STMPE801 and STMPE1600 don't have RE and FE registers */ + if ((stmpe->partnum == STMPE801 || + stmpe->partnum == STMPE1600) && + (i != REG_IE)) + continue; + + for (j = 0; j < num_banks; j++) { + u8 old = stmpe_gpio->oldregs[i][j]; + u8 new = stmpe_gpio->regs[i][j]; + + if (new == old) + continue; + + stmpe_gpio->oldregs[i][j] = new; + stmpe_reg_write(stmpe, stmpe->regs[regmap[i][j]], new); + } + } + + mutex_unlock(&stmpe_gpio->irq_lock); +} + +static void stmpe_gpio_irq_mask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); + int offset = d->hwirq; + int regoffset = offset / 8; + int mask = BIT(offset % 8); + + stmpe_gpio->regs[REG_IE][regoffset] &= ~mask; +} + +static void stmpe_gpio_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); + int offset = d->hwirq; + int regoffset = offset / 8; + int mask = BIT(offset % 8); + + stmpe_gpio->regs[REG_IE][regoffset] |= mask; +} + +static void stmpe_dbg_show_one(struct seq_file *s, + struct gpio_chip *gc, + unsigned offset, unsigned gpio) +{ + struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); + struct stmpe *stmpe = stmpe_gpio->stmpe; + const char *label = gpiochip_is_requested(gc, offset); + bool val = !!stmpe_gpio_get(gc, offset); + u8 bank = offset / 8; + u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank]; + u8 mask = BIT(offset % 8); + int ret; + u8 dir; + + ret = stmpe_reg_read(stmpe, dir_reg); + if (ret < 0) + return; + dir = !!(ret & mask); + + if (dir) { + seq_printf(s, " gpio-%-3d (%-20.20s) out %s", + gpio, label ?: "(none)", + val ? "hi" : "lo"); + } else { + u8 edge_det_reg; + u8 rise_reg; + u8 fall_reg; + u8 irqen_reg; + + static const char * const edge_det_values[] = { + "edge-inactive", + "edge-asserted", + "not-supported" + }; + static const char * const rise_values[] = { + "no-rising-edge-detection", + "rising-edge-detection", + "not-supported" + }; + static const char * const fall_values[] = { + "no-falling-edge-detection", + "falling-edge-detection", + "not-supported" + }; + #define NOT_SUPPORTED_IDX 2 + u8 edge_det = NOT_SUPPORTED_IDX; + u8 rise = NOT_SUPPORTED_IDX; + u8 fall = NOT_SUPPORTED_IDX; + bool irqen; + + switch (stmpe->partnum) { + case STMPE610: + case STMPE811: + case STMPE1601: + case STMPE2401: + case STMPE2403: + edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_LSB + bank]; + ret = stmpe_reg_read(stmpe, edge_det_reg); + if (ret < 0) + return; + edge_det = !!(ret & mask); + /* fall through */ + case STMPE1801: + rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank]; + fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank]; + + ret = stmpe_reg_read(stmpe, rise_reg); + if (ret < 0) + return; + rise = !!(ret & mask); + ret = stmpe_reg_read(stmpe, fall_reg); + if (ret < 0) + return; + fall = !!(ret & mask); + /* fall through */ + case STMPE801: + case STMPE1600: + irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank]; + break; + + default: + return; + } + + ret = stmpe_reg_read(stmpe, irqen_reg); + if (ret < 0) + return; + irqen = !!(ret & mask); + + seq_printf(s, " gpio-%-3d (%-20.20s) in %s %13s %13s %25s %25s", + gpio, label ?: "(none)", + val ? "hi" : "lo", + edge_det_values[edge_det], + irqen ? "IRQ-enabled" : "IRQ-disabled", + rise_values[rise], + fall_values[fall]); + } +} + +static void stmpe_dbg_show(struct seq_file *s, struct gpio_chip *gc) +{ + unsigned i; + unsigned gpio = gc->base; + + for (i = 0; i < gc->ngpio; i++, gpio++) { + stmpe_dbg_show_one(s, gc, i, gpio); + seq_putc(s, '\n'); + } +} + +static struct irq_chip stmpe_gpio_irq_chip = { + .name = "stmpe-gpio", + .irq_bus_lock = stmpe_gpio_irq_lock, + .irq_bus_sync_unlock = stmpe_gpio_irq_sync_unlock, + .irq_mask = stmpe_gpio_irq_mask, + .irq_unmask = stmpe_gpio_irq_unmask, + .irq_set_type = stmpe_gpio_irq_set_type, +}; + +#define MAX_GPIOS 24 + +static irqreturn_t stmpe_gpio_irq(int irq, void *dev) +{ + struct stmpe_gpio *stmpe_gpio = dev; + struct stmpe *stmpe = stmpe_gpio->stmpe; + u8 statmsbreg; + int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); + u8 status[DIV_ROUND_UP(MAX_GPIOS, 8)]; + int ret; + int i; + + /* + * the stmpe_block_read() call below, imposes to set statmsbreg + * with the register located at the lowest address. As STMPE1600 + * variant is the only one which respect registers address's order + * (LSB regs located at lowest address than MSB ones) whereas all + * the others have a registers layout with MSB located before the + * LSB regs. + */ + if (stmpe->partnum == STMPE1600) + statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_LSB]; + else + statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB]; + + ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status); + if (ret < 0) + return IRQ_NONE; + + for (i = 0; i < num_banks; i++) { + int bank = (stmpe_gpio->stmpe->partnum == STMPE1600) ? i : + num_banks - i - 1; + unsigned int enabled = stmpe_gpio->regs[REG_IE][bank]; + unsigned int stat = status[i]; + + stat &= enabled; + if (!stat) + continue; + + while (stat) { + int bit = __ffs(stat); + int line = bank * 8 + bit; + int child_irq = irq_find_mapping(stmpe_gpio->chip.irq.domain, + line); + + handle_nested_irq(child_irq); + stat &= ~BIT(bit); + } + + /* + * interrupt status register write has no effect on + * 801/1801/1600, bits are cleared when read. + * Edge detect register is not present on 801/1600/1801 + */ + if (stmpe->partnum != STMPE801 && stmpe->partnum != STMPE1600 && + stmpe->partnum != STMPE1801) { + stmpe_reg_write(stmpe, statmsbreg + i, status[i]); + stmpe_reg_write(stmpe, + stmpe->regs[STMPE_IDX_GPEDR_MSB] + i, + status[i]); + } + } + + return IRQ_HANDLED; +} + +static int stmpe_gpio_probe(struct platform_device *pdev) +{ + struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); + struct device_node *np = pdev->dev.of_node; + struct stmpe_gpio *stmpe_gpio; + int ret, irq; + + if (stmpe->num_gpios > MAX_GPIOS) { + dev_err(&pdev->dev, "Need to increase maximum GPIO number\n"); + return -EINVAL; + } + + stmpe_gpio = kzalloc(sizeof(*stmpe_gpio), GFP_KERNEL); + if (!stmpe_gpio) + return -ENOMEM; + + mutex_init(&stmpe_gpio->irq_lock); + + stmpe_gpio->dev = &pdev->dev; + stmpe_gpio->stmpe = stmpe; + stmpe_gpio->chip = template_chip; + stmpe_gpio->chip.ngpio = stmpe->num_gpios; + stmpe_gpio->chip.parent = &pdev->dev; + stmpe_gpio->chip.of_node = np; + stmpe_gpio->chip.base = -1; + + if (IS_ENABLED(CONFIG_DEBUG_FS)) + stmpe_gpio->chip.dbg_show = stmpe_dbg_show; + + of_property_read_u32(np, "st,norequest-mask", + &stmpe_gpio->norequest_mask); + if (stmpe_gpio->norequest_mask) + stmpe_gpio->chip.irq.need_valid_mask = true; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + dev_info(&pdev->dev, + "device configured in no-irq mode: " + "irqs are not available\n"); + + ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO); + if (ret) + goto out_free; + + ret = gpiochip_add_data(&stmpe_gpio->chip, stmpe_gpio); + if (ret) { + dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret); + goto out_disable; + } + + if (irq > 0) { + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + stmpe_gpio_irq, IRQF_ONESHOT, + "stmpe-gpio", stmpe_gpio); + if (ret) { + dev_err(&pdev->dev, "unable to get irq: %d\n", ret); + goto out_disable; + } + if (stmpe_gpio->norequest_mask) { + int i; + + /* Forbid unused lines to be mapped as IRQs */ + for (i = 0; i < sizeof(u32); i++) + if (stmpe_gpio->norequest_mask & BIT(i)) + clear_bit(i, stmpe_gpio->chip.irq.valid_mask); + } + ret = gpiochip_irqchip_add_nested(&stmpe_gpio->chip, + &stmpe_gpio_irq_chip, + 0, + handle_simple_irq, + IRQ_TYPE_NONE); + if (ret) { + dev_err(&pdev->dev, + "could not connect irqchip to gpiochip\n"); + goto out_disable; + } + + gpiochip_set_nested_irqchip(&stmpe_gpio->chip, + &stmpe_gpio_irq_chip, + irq); + } + + platform_set_drvdata(pdev, stmpe_gpio); + + return 0; + +out_disable: + stmpe_disable(stmpe, STMPE_BLOCK_GPIO); + gpiochip_remove(&stmpe_gpio->chip); +out_free: + kfree(stmpe_gpio); + return ret; +} + +static struct platform_driver stmpe_gpio_driver = { + .driver = { + .suppress_bind_attrs = true, + .name = "stmpe-gpio", + }, + .probe = stmpe_gpio_probe, +}; + +static int __init stmpe_gpio_init(void) +{ + return platform_driver_register(&stmpe_gpio_driver); +} +subsys_initcall(stmpe_gpio_init); diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c new file mode 100644 index 000000000..19972084c --- /dev/null +++ b/drivers/gpio/gpio-stp-xway.c @@ -0,0 +1,302 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <john@phrozen.org> + * + */ + +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/of_platform.h> +#include <linux/mutex.h> +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <lantiq_soc.h> + +/* + * The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a + * peripheral controller used to drive external shift register cascades. At most + * 3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem + * to drive the 2 LSBs of the cascade automatically. + */ + +/* control register 0 */ +#define XWAY_STP_CON0 0x00 +/* control register 1 */ +#define XWAY_STP_CON1 0x04 +/* data register 0 */ +#define XWAY_STP_CPU0 0x08 +/* data register 1 */ +#define XWAY_STP_CPU1 0x0C +/* access register */ +#define XWAY_STP_AR 0x10 + +/* software or hardware update select bit */ +#define XWAY_STP_CON_SWU BIT(31) + +/* automatic update rates */ +#define XWAY_STP_2HZ 0 +#define XWAY_STP_4HZ BIT(23) +#define XWAY_STP_8HZ BIT(24) +#define XWAY_STP_10HZ (BIT(24) | BIT(23)) +#define XWAY_STP_SPEED_MASK (0xf << 23) + +/* clock source for automatic update */ +#define XWAY_STP_UPD_FPI BIT(31) +#define XWAY_STP_UPD_MASK (BIT(31) | BIT(30)) + +/* let the adsl core drive the 2 LSBs */ +#define XWAY_STP_ADSL_SHIFT 24 +#define XWAY_STP_ADSL_MASK 0x3 + +/* 2 groups of 3 bits can be driven by the phys */ +#define XWAY_STP_PHY_MASK 0x7 +#define XWAY_STP_PHY1_SHIFT 27 +#define XWAY_STP_PHY2_SHIFT 15 + +/* STP has 3 groups of 8 bits */ +#define XWAY_STP_GROUP0 BIT(0) +#define XWAY_STP_GROUP1 BIT(1) +#define XWAY_STP_GROUP2 BIT(2) +#define XWAY_STP_GROUP_MASK (0x7) + +/* Edge configuration bits */ +#define XWAY_STP_FALLING BIT(26) +#define XWAY_STP_EDGE_MASK BIT(26) + +#define xway_stp_r32(m, reg) __raw_readl(m + reg) +#define xway_stp_w32(m, val, reg) __raw_writel(val, m + reg) +#define xway_stp_w32_mask(m, clear, set, reg) \ + ltq_w32((ltq_r32(m + reg) & ~(clear)) | (set), \ + m + reg) + +struct xway_stp { + struct gpio_chip gc; + void __iomem *virt; + u32 edge; /* rising or falling edge triggered shift register */ + u32 shadow; /* shadow the shift registers state */ + u8 groups; /* we can drive 1-3 groups of 8bit each */ + u8 dsl; /* the 2 LSBs can be driven by the dsl core */ + u8 phy1; /* 3 bits can be driven by phy1 */ + u8 phy2; /* 3 bits can be driven by phy2 */ + u8 reserved; /* mask out the hw driven bits in gpio_request */ +}; + +/** + * xway_stp_get() - gpio_chip->get - get gpios. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * Gets the shadow value. + */ +static int xway_stp_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct xway_stp *chip = gpiochip_get_data(gc); + + return (xway_stp_r32(chip->virt, XWAY_STP_CPU0) & BIT(gpio)); +} + +/** + * xway_stp_set() - gpio_chip->set - set gpios. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * Set the shadow value and call ltq_ebu_apply. + */ +static void xway_stp_set(struct gpio_chip *gc, unsigned gpio, int val) +{ + struct xway_stp *chip = gpiochip_get_data(gc); + + if (val) + chip->shadow |= BIT(gpio); + else + chip->shadow &= ~BIT(gpio); + xway_stp_w32(chip->virt, chip->shadow, XWAY_STP_CPU0); + xway_stp_w32_mask(chip->virt, 0, XWAY_STP_CON_SWU, XWAY_STP_CON0); +} + +/** + * xway_stp_dir_out() - gpio_chip->dir_out - set gpio direction. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * Same as xway_stp_set, always returns 0. + */ +static int xway_stp_dir_out(struct gpio_chip *gc, unsigned gpio, int val) +{ + xway_stp_set(gc, gpio, val); + + return 0; +} + +/** + * xway_stp_request() - gpio_chip->request + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * We mask out the HW driven pins + */ +static int xway_stp_request(struct gpio_chip *gc, unsigned gpio) +{ + struct xway_stp *chip = gpiochip_get_data(gc); + + if ((gpio < 8) && (chip->reserved & BIT(gpio))) { + dev_err(gc->parent, "GPIO %d is driven by hardware\n", gpio); + return -ENODEV; + } + + return 0; +} + +/** + * xway_stp_hw_init() - Configure the STP unit and enable the clock gate + * @virt: pointer to the remapped register range + */ +static int xway_stp_hw_init(struct xway_stp *chip) +{ + /* sane defaults */ + xway_stp_w32(chip->virt, 0, XWAY_STP_AR); + xway_stp_w32(chip->virt, 0, XWAY_STP_CPU0); + xway_stp_w32(chip->virt, 0, XWAY_STP_CPU1); + xway_stp_w32(chip->virt, XWAY_STP_CON_SWU, XWAY_STP_CON0); + xway_stp_w32(chip->virt, 0, XWAY_STP_CON1); + + /* apply edge trigger settings for the shift register */ + xway_stp_w32_mask(chip->virt, XWAY_STP_EDGE_MASK, + chip->edge, XWAY_STP_CON0); + + /* apply led group settings */ + xway_stp_w32_mask(chip->virt, XWAY_STP_GROUP_MASK, + chip->groups, XWAY_STP_CON1); + + /* tell the hardware which pins are controlled by the dsl modem */ + xway_stp_w32_mask(chip->virt, + XWAY_STP_ADSL_MASK << XWAY_STP_ADSL_SHIFT, + chip->dsl << XWAY_STP_ADSL_SHIFT, + XWAY_STP_CON0); + + /* tell the hardware which pins are controlled by the phys */ + xway_stp_w32_mask(chip->virt, + XWAY_STP_PHY_MASK << XWAY_STP_PHY1_SHIFT, + chip->phy1 << XWAY_STP_PHY1_SHIFT, + XWAY_STP_CON0); + xway_stp_w32_mask(chip->virt, + XWAY_STP_PHY_MASK << XWAY_STP_PHY2_SHIFT, + chip->phy2 << XWAY_STP_PHY2_SHIFT, + XWAY_STP_CON1); + + /* mask out the hw driven bits in gpio_request */ + chip->reserved = (chip->phy2 << 5) | (chip->phy1 << 2) | chip->dsl; + + /* + * if we have pins that are driven by hw, we need to tell the stp what + * clock to use as a timer. + */ + if (chip->reserved) + xway_stp_w32_mask(chip->virt, XWAY_STP_UPD_MASK, + XWAY_STP_UPD_FPI, XWAY_STP_CON1); + + return 0; +} + +static int xway_stp_probe(struct platform_device *pdev) +{ + struct resource *res; + u32 shadow, groups, dsl, phy; + struct xway_stp *chip; + struct clk *clk; + int ret = 0; + + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + chip->virt = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(chip->virt)) + return PTR_ERR(chip->virt); + + chip->gc.parent = &pdev->dev; + chip->gc.label = "stp-xway"; + chip->gc.direction_output = xway_stp_dir_out; + chip->gc.get = xway_stp_get; + chip->gc.set = xway_stp_set; + chip->gc.request = xway_stp_request; + chip->gc.base = -1; + chip->gc.owner = THIS_MODULE; + + /* store the shadow value if one was passed by the devicetree */ + if (!of_property_read_u32(pdev->dev.of_node, "lantiq,shadow", &shadow)) + chip->shadow = shadow; + + /* find out which gpio groups should be enabled */ + if (!of_property_read_u32(pdev->dev.of_node, "lantiq,groups", &groups)) + chip->groups = groups & XWAY_STP_GROUP_MASK; + else + chip->groups = XWAY_STP_GROUP0; + chip->gc.ngpio = fls(chip->groups) * 8; + + /* find out which gpios are controlled by the dsl core */ + if (!of_property_read_u32(pdev->dev.of_node, "lantiq,dsl", &dsl)) + chip->dsl = dsl & XWAY_STP_ADSL_MASK; + + /* find out which gpios are controlled by the phys */ + if (of_machine_is_compatible("lantiq,ar9") || + of_machine_is_compatible("lantiq,gr9") || + of_machine_is_compatible("lantiq,vr9")) { + if (!of_property_read_u32(pdev->dev.of_node, "lantiq,phy1", &phy)) + chip->phy1 = phy & XWAY_STP_PHY_MASK; + if (!of_property_read_u32(pdev->dev.of_node, "lantiq,phy2", &phy)) + chip->phy2 = phy & XWAY_STP_PHY_MASK; + } + + /* check which edge trigger we should use, default to a falling edge */ + if (!of_find_property(pdev->dev.of_node, "lantiq,rising", NULL)) + chip->edge = XWAY_STP_FALLING; + + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Failed to get clock\n"); + return PTR_ERR(clk); + } + clk_enable(clk); + + ret = xway_stp_hw_init(chip); + if (!ret) + ret = devm_gpiochip_add_data(&pdev->dev, &chip->gc, chip); + + if (!ret) + dev_info(&pdev->dev, "Init done\n"); + + return ret; +} + +static const struct of_device_id xway_stp_match[] = { + { .compatible = "lantiq,gpio-stp-xway" }, + {}, +}; +MODULE_DEVICE_TABLE(of, xway_stp_match); + +static struct platform_driver xway_stp_driver = { + .probe = xway_stp_probe, + .driver = { + .name = "gpio-stp-xway", + .of_match_table = xway_stp_match, + }, +}; + +static int __init xway_stp_init(void) +{ + return platform_driver_register(&xway_stp_driver); +} + +subsys_initcall(xway_stp_init); diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c new file mode 100644 index 000000000..7f3da34c7 --- /dev/null +++ b/drivers/gpio/gpio-syscon.c @@ -0,0 +1,283 @@ +/* + * SYSCON GPIO driver + * + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> + +#define GPIO_SYSCON_FEAT_IN BIT(0) +#define GPIO_SYSCON_FEAT_OUT BIT(1) +#define GPIO_SYSCON_FEAT_DIR BIT(2) + +/* SYSCON driver is designed to use 32-bit wide registers */ +#define SYSCON_REG_SIZE (4) +#define SYSCON_REG_BITS (SYSCON_REG_SIZE * 8) + +/** + * struct syscon_gpio_data - Configuration for the device. + * compatible: SYSCON driver compatible string. + * flags: Set of GPIO_SYSCON_FEAT_ flags: + * GPIO_SYSCON_FEAT_IN: GPIOs supports input, + * GPIO_SYSCON_FEAT_OUT: GPIOs supports output, + * GPIO_SYSCON_FEAT_DIR: GPIOs supports switch direction. + * bit_count: Number of bits used as GPIOs. + * dat_bit_offset: Offset (in bits) to the first GPIO bit. + * dir_bit_offset: Optional offset (in bits) to the first bit to switch + * GPIO direction (Used with GPIO_SYSCON_FEAT_DIR flag). + * set: HW specific callback to assigns output value + * for signal "offset" + */ + +struct syscon_gpio_data { + const char *compatible; + unsigned int flags; + unsigned int bit_count; + unsigned int dat_bit_offset; + unsigned int dir_bit_offset; + void (*set)(struct gpio_chip *chip, + unsigned offset, int value); +}; + +struct syscon_gpio_priv { + struct gpio_chip chip; + struct regmap *syscon; + const struct syscon_gpio_data *data; + u32 dreg_offset; + u32 dir_reg_offset; +}; + +static int syscon_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct syscon_gpio_priv *priv = gpiochip_get_data(chip); + unsigned int val, offs; + int ret; + + offs = priv->dreg_offset + priv->data->dat_bit_offset + offset; + + ret = regmap_read(priv->syscon, + (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, &val); + if (ret) + return ret; + + return !!(val & BIT(offs % SYSCON_REG_BITS)); +} + +static void syscon_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct syscon_gpio_priv *priv = gpiochip_get_data(chip); + unsigned int offs; + + offs = priv->dreg_offset + priv->data->dat_bit_offset + offset; + + regmap_update_bits(priv->syscon, + (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, + BIT(offs % SYSCON_REG_BITS), + val ? BIT(offs % SYSCON_REG_BITS) : 0); +} + +static int syscon_gpio_dir_in(struct gpio_chip *chip, unsigned offset) +{ + struct syscon_gpio_priv *priv = gpiochip_get_data(chip); + + if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) { + unsigned int offs; + + offs = priv->dir_reg_offset + + priv->data->dir_bit_offset + offset; + + regmap_update_bits(priv->syscon, + (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, + BIT(offs % SYSCON_REG_BITS), 0); + } + + return 0; +} + +static int syscon_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int val) +{ + struct syscon_gpio_priv *priv = gpiochip_get_data(chip); + + if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) { + unsigned int offs; + + offs = priv->dir_reg_offset + + priv->data->dir_bit_offset + offset; + + regmap_update_bits(priv->syscon, + (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, + BIT(offs % SYSCON_REG_BITS), + BIT(offs % SYSCON_REG_BITS)); + } + + chip->set(chip, offset, val); + + return 0; +} + +static const struct syscon_gpio_data clps711x_mctrl_gpio = { + /* ARM CLPS711X SYSFLG1 Bits 8-10 */ + .compatible = "cirrus,ep7209-syscon1", + .flags = GPIO_SYSCON_FEAT_IN, + .bit_count = 3, + .dat_bit_offset = 0x40 * 8 + 8, +}; + +static void rockchip_gpio_set(struct gpio_chip *chip, unsigned int offset, + int val) +{ + struct syscon_gpio_priv *priv = gpiochip_get_data(chip); + unsigned int offs; + u8 bit; + u32 data; + int ret; + + offs = priv->dreg_offset + priv->data->dat_bit_offset + offset; + bit = offs % SYSCON_REG_BITS; + data = (val ? BIT(bit) : 0) | BIT(bit + 16); + ret = regmap_write(priv->syscon, + (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, + data); + if (ret < 0) + dev_err(chip->parent, "gpio write failed ret(%d)\n", ret); +} + +static const struct syscon_gpio_data rockchip_rk3328_gpio_mute = { + /* RK3328 GPIO_MUTE is an output only pin at GRF_SOC_CON10[1] */ + .flags = GPIO_SYSCON_FEAT_OUT, + .bit_count = 1, + .dat_bit_offset = 0x0428 * 8 + 1, + .set = rockchip_gpio_set, +}; + +#define KEYSTONE_LOCK_BIT BIT(0) + +static void keystone_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct syscon_gpio_priv *priv = gpiochip_get_data(chip); + unsigned int offs; + int ret; + + offs = priv->dreg_offset + priv->data->dat_bit_offset + offset; + + if (!val) + return; + + ret = regmap_update_bits( + priv->syscon, + (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, + BIT(offs % SYSCON_REG_BITS) | KEYSTONE_LOCK_BIT, + BIT(offs % SYSCON_REG_BITS) | KEYSTONE_LOCK_BIT); + if (ret < 0) + dev_err(chip->parent, "gpio write failed ret(%d)\n", ret); +} + +static const struct syscon_gpio_data keystone_dsp_gpio = { + /* ARM Keystone 2 */ + .compatible = NULL, + .flags = GPIO_SYSCON_FEAT_OUT, + .bit_count = 28, + .dat_bit_offset = 4, + .set = keystone_gpio_set, +}; + +static const struct of_device_id syscon_gpio_ids[] = { + { + .compatible = "cirrus,ep7209-mctrl-gpio", + .data = &clps711x_mctrl_gpio, + }, + { + .compatible = "ti,keystone-dsp-gpio", + .data = &keystone_dsp_gpio, + }, + { + .compatible = "rockchip,rk3328-grf-gpio", + .data = &rockchip_rk3328_gpio_mute, + }, + { } +}; +MODULE_DEVICE_TABLE(of, syscon_gpio_ids); + +static int syscon_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct syscon_gpio_priv *priv; + struct device_node *np = dev->of_node; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->data = of_device_get_match_data(dev); + + if (priv->data->compatible) { + priv->syscon = syscon_regmap_lookup_by_compatible( + priv->data->compatible); + if (IS_ERR(priv->syscon)) + return PTR_ERR(priv->syscon); + } else { + priv->syscon = + syscon_regmap_lookup_by_phandle(np, "gpio,syscon-dev"); + if (IS_ERR(priv->syscon) && np->parent) + priv->syscon = syscon_node_to_regmap(np->parent); + if (IS_ERR(priv->syscon)) + return PTR_ERR(priv->syscon); + + ret = of_property_read_u32_index(np, "gpio,syscon-dev", 1, + &priv->dreg_offset); + if (ret) + dev_err(dev, "can't read the data register offset!\n"); + + priv->dreg_offset <<= 3; + + ret = of_property_read_u32_index(np, "gpio,syscon-dev", 2, + &priv->dir_reg_offset); + if (ret) + dev_dbg(dev, "can't read the dir register offset!\n"); + + priv->dir_reg_offset <<= 3; + } + + priv->chip.parent = dev; + priv->chip.owner = THIS_MODULE; + priv->chip.label = dev_name(dev); + priv->chip.base = -1; + priv->chip.ngpio = priv->data->bit_count; + priv->chip.get = syscon_gpio_get; + if (priv->data->flags & GPIO_SYSCON_FEAT_IN) + priv->chip.direction_input = syscon_gpio_dir_in; + if (priv->data->flags & GPIO_SYSCON_FEAT_OUT) { + priv->chip.set = priv->data->set ? : syscon_gpio_set; + priv->chip.direction_output = syscon_gpio_dir_out; + } + + platform_set_drvdata(pdev, priv); + + return devm_gpiochip_add_data(&pdev->dev, &priv->chip, priv); +} + +static struct platform_driver syscon_gpio_driver = { + .driver = { + .name = "gpio-syscon", + .of_match_table = syscon_gpio_ids, + }, + .probe = syscon_gpio_probe, +}; +module_platform_driver(syscon_gpio_driver); + +MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); +MODULE_DESCRIPTION("SYSCON GPIO driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-tb10x.c b/drivers/gpio/gpio-tb10x.c new file mode 100644 index 000000000..a12cd0b5c --- /dev/null +++ b/drivers/gpio/gpio-tb10x.c @@ -0,0 +1,297 @@ +/* Abilis Systems MODULE DESCRIPTION + * + * Copyright (C) Abilis Systems 2013 + * + * Authors: Sascha Leuenberger <sascha.leuenberger@abilis.com> + * Christian Ruppert <christian.ruppert@abilis.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio/driver.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/spinlock.h> +#include <linux/bitops.h> +#include <linux/pinctrl/consumer.h> + +#define TB10X_GPIO_DIR_IN (0x00000000) +#define TB10X_GPIO_DIR_OUT (0x00000001) +#define OFFSET_TO_REG_DDR (0x00) +#define OFFSET_TO_REG_DATA (0x04) +#define OFFSET_TO_REG_INT_EN (0x08) +#define OFFSET_TO_REG_CHANGE (0x0C) +#define OFFSET_TO_REG_WRMASK (0x10) +#define OFFSET_TO_REG_INT_TYPE (0x14) + + +/** + * @spinlock: used for atomic read/modify/write of registers + * @base: register base address + * @domain: IRQ domain of GPIO generated interrupts managed by this controller + * @irq: Interrupt line of parent interrupt controller + * @gc: gpio_chip structure associated to this GPIO controller + */ +struct tb10x_gpio { + spinlock_t spinlock; + void __iomem *base; + struct irq_domain *domain; + int irq; + struct gpio_chip gc; +}; + +static inline u32 tb10x_reg_read(struct tb10x_gpio *gpio, unsigned int offs) +{ + return ioread32(gpio->base + offs); +} + +static inline void tb10x_reg_write(struct tb10x_gpio *gpio, unsigned int offs, + u32 val) +{ + iowrite32(val, gpio->base + offs); +} + +static inline void tb10x_set_bits(struct tb10x_gpio *gpio, unsigned int offs, + u32 mask, u32 val) +{ + u32 r; + unsigned long flags; + + spin_lock_irqsave(&gpio->spinlock, flags); + + r = tb10x_reg_read(gpio, offs); + r = (r & ~mask) | (val & mask); + + tb10x_reg_write(gpio, offs, r); + + spin_unlock_irqrestore(&gpio->spinlock, flags); +} + +static int tb10x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct tb10x_gpio *tb10x_gpio = gpiochip_get_data(chip); + int mask = BIT(offset); + int val = TB10X_GPIO_DIR_IN << offset; + + tb10x_set_bits(tb10x_gpio, OFFSET_TO_REG_DDR, mask, val); + + return 0; +} + +static int tb10x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct tb10x_gpio *tb10x_gpio = gpiochip_get_data(chip); + int val; + + val = tb10x_reg_read(tb10x_gpio, OFFSET_TO_REG_DATA); + + if (val & BIT(offset)) + return 1; + else + return 0; +} + +static void tb10x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct tb10x_gpio *tb10x_gpio = gpiochip_get_data(chip); + int mask = BIT(offset); + int val = value << offset; + + tb10x_set_bits(tb10x_gpio, OFFSET_TO_REG_DATA, mask, val); +} + +static int tb10x_gpio_direction_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct tb10x_gpio *tb10x_gpio = gpiochip_get_data(chip); + int mask = BIT(offset); + int val = TB10X_GPIO_DIR_OUT << offset; + + tb10x_gpio_set(chip, offset, value); + tb10x_set_bits(tb10x_gpio, OFFSET_TO_REG_DDR, mask, val); + + return 0; +} + +static int tb10x_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct tb10x_gpio *tb10x_gpio = gpiochip_get_data(chip); + + return irq_create_mapping(tb10x_gpio->domain, offset); +} + +static int tb10x_gpio_irq_set_type(struct irq_data *data, unsigned int type) +{ + if ((type & IRQF_TRIGGER_MASK) != IRQ_TYPE_EDGE_BOTH) { + pr_err("Only (both) edge triggered interrupts supported.\n"); + return -EINVAL; + } + + irqd_set_trigger_type(data, type); + + return IRQ_SET_MASK_OK; +} + +static irqreturn_t tb10x_gpio_irq_cascade(int irq, void *data) +{ + struct tb10x_gpio *tb10x_gpio = data; + u32 r = tb10x_reg_read(tb10x_gpio, OFFSET_TO_REG_CHANGE); + u32 m = tb10x_reg_read(tb10x_gpio, OFFSET_TO_REG_INT_EN); + const unsigned long bits = r & m; + int i; + + for_each_set_bit(i, &bits, 32) + generic_handle_irq(irq_find_mapping(tb10x_gpio->domain, i)); + + return IRQ_HANDLED; +} + +static int tb10x_gpio_probe(struct platform_device *pdev) +{ + struct tb10x_gpio *tb10x_gpio; + struct resource *mem; + struct device_node *dn = pdev->dev.of_node; + int ret = -EBUSY; + u32 ngpio; + + if (!dn) + return -EINVAL; + + if (of_property_read_u32(dn, "abilis,ngpio", &ngpio)) + return -EINVAL; + + tb10x_gpio = devm_kzalloc(&pdev->dev, sizeof(*tb10x_gpio), GFP_KERNEL); + if (tb10x_gpio == NULL) + return -ENOMEM; + + spin_lock_init(&tb10x_gpio->spinlock); + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + tb10x_gpio->base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(tb10x_gpio->base)) + return PTR_ERR(tb10x_gpio->base); + + tb10x_gpio->gc.label = + devm_kasprintf(&pdev->dev, GFP_KERNEL, "%pOF", pdev->dev.of_node); + if (!tb10x_gpio->gc.label) + return -ENOMEM; + + tb10x_gpio->gc.parent = &pdev->dev; + tb10x_gpio->gc.owner = THIS_MODULE; + tb10x_gpio->gc.direction_input = tb10x_gpio_direction_in; + tb10x_gpio->gc.get = tb10x_gpio_get; + tb10x_gpio->gc.direction_output = tb10x_gpio_direction_out; + tb10x_gpio->gc.set = tb10x_gpio_set; + tb10x_gpio->gc.request = gpiochip_generic_request; + tb10x_gpio->gc.free = gpiochip_generic_free; + tb10x_gpio->gc.base = -1; + tb10x_gpio->gc.ngpio = ngpio; + tb10x_gpio->gc.can_sleep = false; + + + ret = devm_gpiochip_add_data(&pdev->dev, &tb10x_gpio->gc, tb10x_gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not add gpiochip.\n"); + return ret; + } + + platform_set_drvdata(pdev, tb10x_gpio); + + if (of_find_property(dn, "interrupt-controller", NULL)) { + struct irq_chip_generic *gc; + + ret = platform_get_irq(pdev, 0); + if (ret < 0) { + dev_err(&pdev->dev, "No interrupt specified.\n"); + return ret; + } + + tb10x_gpio->gc.to_irq = tb10x_gpio_to_irq; + tb10x_gpio->irq = ret; + + ret = devm_request_irq(&pdev->dev, ret, tb10x_gpio_irq_cascade, + IRQF_TRIGGER_NONE | IRQF_SHARED, + dev_name(&pdev->dev), tb10x_gpio); + if (ret != 0) + return ret; + + tb10x_gpio->domain = irq_domain_add_linear(dn, + tb10x_gpio->gc.ngpio, + &irq_generic_chip_ops, NULL); + if (!tb10x_gpio->domain) { + return -ENOMEM; + } + + ret = irq_alloc_domain_generic_chips(tb10x_gpio->domain, + tb10x_gpio->gc.ngpio, 1, tb10x_gpio->gc.label, + handle_edge_irq, IRQ_NOREQUEST, IRQ_NOPROBE, + IRQ_GC_INIT_MASK_CACHE); + if (ret) + return ret; + + gc = tb10x_gpio->domain->gc->gc[0]; + gc->reg_base = tb10x_gpio->base; + gc->chip_types[0].type = IRQ_TYPE_EDGE_BOTH; + gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit; + gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit; + gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit; + gc->chip_types[0].chip.irq_set_type = tb10x_gpio_irq_set_type; + gc->chip_types[0].regs.ack = OFFSET_TO_REG_CHANGE; + gc->chip_types[0].regs.mask = OFFSET_TO_REG_INT_EN; + } + + return 0; +} + +static int tb10x_gpio_remove(struct platform_device *pdev) +{ + struct tb10x_gpio *tb10x_gpio = platform_get_drvdata(pdev); + + if (tb10x_gpio->gc.to_irq) { + irq_remove_generic_chip(tb10x_gpio->domain->gc->gc[0], + BIT(tb10x_gpio->gc.ngpio) - 1, 0, 0); + kfree(tb10x_gpio->domain->gc); + irq_domain_remove(tb10x_gpio->domain); + } + + return 0; +} + +static const struct of_device_id tb10x_gpio_dt_ids[] = { + { .compatible = "abilis,tb10x-gpio" }, + { } +}; +MODULE_DEVICE_TABLE(of, tb10x_gpio_dt_ids); + +static struct platform_driver tb10x_gpio_driver = { + .probe = tb10x_gpio_probe, + .remove = tb10x_gpio_remove, + .driver = { + .name = "tb10x-gpio", + .of_match_table = tb10x_gpio_dt_ids, + } +}; + +module_platform_driver(tb10x_gpio_driver); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("tb10x gpio."); +MODULE_VERSION("0.0.1"); diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c new file mode 100644 index 000000000..1436098b1 --- /dev/null +++ b/drivers/gpio/gpio-tc3589x.c @@ -0,0 +1,368 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/gpio/driver.h> +#include <linux/of.h> +#include <linux/interrupt.h> +#include <linux/mfd/tc3589x.h> +#include <linux/bitops.h> + +/* + * These registers are modified under the irq bus lock and cached to avoid + * unnecessary writes in bus_sync_unlock. + */ +enum { REG_IBE, REG_IEV, REG_IS, REG_IE }; + +#define CACHE_NR_REGS 4 +#define CACHE_NR_BANKS 3 + +struct tc3589x_gpio { + struct gpio_chip chip; + struct tc3589x *tc3589x; + struct device *dev; + struct mutex irq_lock; + /* Caches of interrupt control registers for bus_lock */ + u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS]; + u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS]; +}; + +static int tc3589x_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(chip); + struct tc3589x *tc3589x = tc3589x_gpio->tc3589x; + u8 reg = TC3589x_GPIODATA0 + (offset / 8) * 2; + u8 mask = BIT(offset % 8); + int ret; + + ret = tc3589x_reg_read(tc3589x, reg); + if (ret < 0) + return ret; + + return !!(ret & mask); +} + +static void tc3589x_gpio_set(struct gpio_chip *chip, unsigned int offset, int val) +{ + struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(chip); + struct tc3589x *tc3589x = tc3589x_gpio->tc3589x; + u8 reg = TC3589x_GPIODATA0 + (offset / 8) * 2; + unsigned int pos = offset % 8; + u8 data[] = {val ? BIT(pos) : 0, BIT(pos)}; + + tc3589x_block_write(tc3589x, reg, ARRAY_SIZE(data), data); +} + +static int tc3589x_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int val) +{ + struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(chip); + struct tc3589x *tc3589x = tc3589x_gpio->tc3589x; + u8 reg = TC3589x_GPIODIR0 + offset / 8; + unsigned int pos = offset % 8; + + tc3589x_gpio_set(chip, offset, val); + + return tc3589x_set_bits(tc3589x, reg, BIT(pos), BIT(pos)); +} + +static int tc3589x_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(chip); + struct tc3589x *tc3589x = tc3589x_gpio->tc3589x; + u8 reg = TC3589x_GPIODIR0 + offset / 8; + unsigned int pos = offset % 8; + + return tc3589x_set_bits(tc3589x, reg, BIT(pos), 0); +} + +static int tc3589x_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(chip); + struct tc3589x *tc3589x = tc3589x_gpio->tc3589x; + u8 reg = TC3589x_GPIODIR0 + offset / 8; + unsigned int pos = offset % 8; + int ret; + + ret = tc3589x_reg_read(tc3589x, reg); + if (ret < 0) + return ret; + + return !(ret & BIT(pos)); +} + +static int tc3589x_gpio_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(chip); + struct tc3589x *tc3589x = tc3589x_gpio->tc3589x; + /* + * These registers are alterated at each second address + * ODM bit 0 = drive to GND or Hi-Z (open drain) + * ODM bit 1 = drive to VDD or Hi-Z (open source) + */ + u8 odmreg = TC3589x_GPIOODM0 + (offset / 8) * 2; + u8 odereg = TC3589x_GPIOODE0 + (offset / 8) * 2; + unsigned int pos = offset % 8; + int ret; + + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + /* Set open drain mode */ + ret = tc3589x_set_bits(tc3589x, odmreg, BIT(pos), 0); + if (ret) + return ret; + /* Enable open drain/source mode */ + return tc3589x_set_bits(tc3589x, odereg, BIT(pos), BIT(pos)); + case PIN_CONFIG_DRIVE_OPEN_SOURCE: + /* Set open source mode */ + ret = tc3589x_set_bits(tc3589x, odmreg, BIT(pos), BIT(pos)); + if (ret) + return ret; + /* Enable open drain/source mode */ + return tc3589x_set_bits(tc3589x, odereg, BIT(pos), BIT(pos)); + case PIN_CONFIG_DRIVE_PUSH_PULL: + /* Disable open drain/source mode */ + return tc3589x_set_bits(tc3589x, odereg, BIT(pos), 0); + default: + break; + } + return -ENOTSUPP; +} + +static const struct gpio_chip template_chip = { + .label = "tc3589x", + .owner = THIS_MODULE, + .get = tc3589x_gpio_get, + .set = tc3589x_gpio_set, + .direction_output = tc3589x_gpio_direction_output, + .direction_input = tc3589x_gpio_direction_input, + .get_direction = tc3589x_gpio_get_direction, + .set_config = tc3589x_gpio_set_config, + .can_sleep = true, +}; + +static int tc3589x_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(gc); + int offset = d->hwirq; + int regoffset = offset / 8; + int mask = BIT(offset % 8); + + if (type == IRQ_TYPE_EDGE_BOTH) { + tc3589x_gpio->regs[REG_IBE][regoffset] |= mask; + return 0; + } + + tc3589x_gpio->regs[REG_IBE][regoffset] &= ~mask; + + if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH) + tc3589x_gpio->regs[REG_IS][regoffset] |= mask; + else + tc3589x_gpio->regs[REG_IS][regoffset] &= ~mask; + + if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH) + tc3589x_gpio->regs[REG_IEV][regoffset] |= mask; + else + tc3589x_gpio->regs[REG_IEV][regoffset] &= ~mask; + + return 0; +} + +static void tc3589x_gpio_irq_lock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(gc); + + mutex_lock(&tc3589x_gpio->irq_lock); +} + +static void tc3589x_gpio_irq_sync_unlock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(gc); + struct tc3589x *tc3589x = tc3589x_gpio->tc3589x; + static const u8 regmap[] = { + [REG_IBE] = TC3589x_GPIOIBE0, + [REG_IEV] = TC3589x_GPIOIEV0, + [REG_IS] = TC3589x_GPIOIS0, + [REG_IE] = TC3589x_GPIOIE0, + }; + int i, j; + + for (i = 0; i < CACHE_NR_REGS; i++) { + for (j = 0; j < CACHE_NR_BANKS; j++) { + u8 old = tc3589x_gpio->oldregs[i][j]; + u8 new = tc3589x_gpio->regs[i][j]; + + if (new == old) + continue; + + tc3589x_gpio->oldregs[i][j] = new; + tc3589x_reg_write(tc3589x, regmap[i] + j, new); + } + } + + mutex_unlock(&tc3589x_gpio->irq_lock); +} + +static void tc3589x_gpio_irq_mask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(gc); + int offset = d->hwirq; + int regoffset = offset / 8; + int mask = BIT(offset % 8); + + tc3589x_gpio->regs[REG_IE][regoffset] &= ~mask; +} + +static void tc3589x_gpio_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(gc); + int offset = d->hwirq; + int regoffset = offset / 8; + int mask = BIT(offset % 8); + + tc3589x_gpio->regs[REG_IE][regoffset] |= mask; +} + +static struct irq_chip tc3589x_gpio_irq_chip = { + .name = "tc3589x-gpio", + .irq_bus_lock = tc3589x_gpio_irq_lock, + .irq_bus_sync_unlock = tc3589x_gpio_irq_sync_unlock, + .irq_mask = tc3589x_gpio_irq_mask, + .irq_unmask = tc3589x_gpio_irq_unmask, + .irq_set_type = tc3589x_gpio_irq_set_type, +}; + +static irqreturn_t tc3589x_gpio_irq(int irq, void *dev) +{ + struct tc3589x_gpio *tc3589x_gpio = dev; + struct tc3589x *tc3589x = tc3589x_gpio->tc3589x; + u8 status[CACHE_NR_BANKS]; + int ret; + int i; + + ret = tc3589x_block_read(tc3589x, TC3589x_GPIOMIS0, + ARRAY_SIZE(status), status); + if (ret < 0) + return IRQ_NONE; + + for (i = 0; i < ARRAY_SIZE(status); i++) { + unsigned int stat = status[i]; + if (!stat) + continue; + + while (stat) { + int bit = __ffs(stat); + int line = i * 8 + bit; + int irq = irq_find_mapping(tc3589x_gpio->chip.irq.domain, + line); + + handle_nested_irq(irq); + stat &= ~(1 << bit); + } + + tc3589x_reg_write(tc3589x, TC3589x_GPIOIC0 + i, status[i]); + } + + return IRQ_HANDLED; +} + +static int tc3589x_gpio_probe(struct platform_device *pdev) +{ + struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent); + struct device_node *np = pdev->dev.of_node; + struct tc3589x_gpio *tc3589x_gpio; + int ret; + int irq; + + if (!np) { + dev_err(&pdev->dev, "No Device Tree node found\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + tc3589x_gpio = devm_kzalloc(&pdev->dev, sizeof(struct tc3589x_gpio), + GFP_KERNEL); + if (!tc3589x_gpio) + return -ENOMEM; + + mutex_init(&tc3589x_gpio->irq_lock); + + tc3589x_gpio->dev = &pdev->dev; + tc3589x_gpio->tc3589x = tc3589x; + + tc3589x_gpio->chip = template_chip; + tc3589x_gpio->chip.ngpio = tc3589x->num_gpio; + tc3589x_gpio->chip.parent = &pdev->dev; + tc3589x_gpio->chip.base = -1; + tc3589x_gpio->chip.of_node = np; + + /* Bring the GPIO module out of reset */ + ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, + TC3589x_RSTCTRL_GPIRST, 0); + if (ret < 0) + return ret; + + ret = devm_request_threaded_irq(&pdev->dev, + irq, NULL, tc3589x_gpio_irq, + IRQF_ONESHOT, "tc3589x-gpio", + tc3589x_gpio); + if (ret) { + dev_err(&pdev->dev, "unable to get irq: %d\n", ret); + return ret; + } + + ret = devm_gpiochip_add_data(&pdev->dev, &tc3589x_gpio->chip, + tc3589x_gpio); + if (ret) { + dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret); + return ret; + } + + ret = gpiochip_irqchip_add_nested(&tc3589x_gpio->chip, + &tc3589x_gpio_irq_chip, + 0, + handle_simple_irq, + IRQ_TYPE_NONE); + if (ret) { + dev_err(&pdev->dev, + "could not connect irqchip to gpiochip\n"); + return ret; + } + + gpiochip_set_nested_irqchip(&tc3589x_gpio->chip, + &tc3589x_gpio_irq_chip, + irq); + + platform_set_drvdata(pdev, tc3589x_gpio); + + return 0; +} + +static struct platform_driver tc3589x_gpio_driver = { + .driver.name = "tc3589x-gpio", + .probe = tc3589x_gpio_probe, +}; + +static int __init tc3589x_gpio_init(void) +{ + return platform_driver_register(&tc3589x_gpio_driver); +} +subsys_initcall(tc3589x_gpio_init); diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c new file mode 100644 index 000000000..579035018 --- /dev/null +++ b/drivers/gpio/gpio-tegra.c @@ -0,0 +1,716 @@ +/* + * arch/arm/mach-tegra/gpio.c + * + * Copyright (c) 2010 Google, Inc + * + * Author: + * Erik Gilling <konkers@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/gpio/driver.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pm.h> + +#define GPIO_BANK(x) ((x) >> 5) +#define GPIO_PORT(x) (((x) >> 3) & 0x3) +#define GPIO_BIT(x) ((x) & 0x7) + +#define GPIO_REG(tgi, x) (GPIO_BANK(x) * tgi->soc->bank_stride + \ + GPIO_PORT(x) * 4) + +#define GPIO_CNF(t, x) (GPIO_REG(t, x) + 0x00) +#define GPIO_OE(t, x) (GPIO_REG(t, x) + 0x10) +#define GPIO_OUT(t, x) (GPIO_REG(t, x) + 0X20) +#define GPIO_IN(t, x) (GPIO_REG(t, x) + 0x30) +#define GPIO_INT_STA(t, x) (GPIO_REG(t, x) + 0x40) +#define GPIO_INT_ENB(t, x) (GPIO_REG(t, x) + 0x50) +#define GPIO_INT_LVL(t, x) (GPIO_REG(t, x) + 0x60) +#define GPIO_INT_CLR(t, x) (GPIO_REG(t, x) + 0x70) +#define GPIO_DBC_CNT(t, x) (GPIO_REG(t, x) + 0xF0) + + +#define GPIO_MSK_CNF(t, x) (GPIO_REG(t, x) + t->soc->upper_offset + 0x00) +#define GPIO_MSK_OE(t, x) (GPIO_REG(t, x) + t->soc->upper_offset + 0x10) +#define GPIO_MSK_OUT(t, x) (GPIO_REG(t, x) + t->soc->upper_offset + 0X20) +#define GPIO_MSK_DBC_EN(t, x) (GPIO_REG(t, x) + t->soc->upper_offset + 0x30) +#define GPIO_MSK_INT_STA(t, x) (GPIO_REG(t, x) + t->soc->upper_offset + 0x40) +#define GPIO_MSK_INT_ENB(t, x) (GPIO_REG(t, x) + t->soc->upper_offset + 0x50) +#define GPIO_MSK_INT_LVL(t, x) (GPIO_REG(t, x) + t->soc->upper_offset + 0x60) + +#define GPIO_INT_LVL_MASK 0x010101 +#define GPIO_INT_LVL_EDGE_RISING 0x000101 +#define GPIO_INT_LVL_EDGE_FALLING 0x000100 +#define GPIO_INT_LVL_EDGE_BOTH 0x010100 +#define GPIO_INT_LVL_LEVEL_HIGH 0x000001 +#define GPIO_INT_LVL_LEVEL_LOW 0x000000 + +struct tegra_gpio_info; + +struct tegra_gpio_bank { + unsigned int bank; + unsigned int irq; + spinlock_t lvl_lock[4]; + spinlock_t dbc_lock[4]; /* Lock for updating debounce count register */ +#ifdef CONFIG_PM_SLEEP + u32 cnf[4]; + u32 out[4]; + u32 oe[4]; + u32 int_enb[4]; + u32 int_lvl[4]; + u32 wake_enb[4]; + u32 dbc_enb[4]; +#endif + u32 dbc_cnt[4]; + struct tegra_gpio_info *tgi; +}; + +struct tegra_gpio_soc_config { + bool debounce_supported; + u32 bank_stride; + u32 upper_offset; +}; + +struct tegra_gpio_info { + struct device *dev; + void __iomem *regs; + struct irq_domain *irq_domain; + struct tegra_gpio_bank *bank_info; + const struct tegra_gpio_soc_config *soc; + struct gpio_chip gc; + struct irq_chip ic; + u32 bank_count; +}; + +static inline void tegra_gpio_writel(struct tegra_gpio_info *tgi, + u32 val, u32 reg) +{ + __raw_writel(val, tgi->regs + reg); +} + +static inline u32 tegra_gpio_readl(struct tegra_gpio_info *tgi, u32 reg) +{ + return __raw_readl(tgi->regs + reg); +} + +static unsigned int tegra_gpio_compose(unsigned int bank, unsigned int port, + unsigned int bit) +{ + return (bank << 5) | ((port & 0x3) << 3) | (bit & 0x7); +} + +static void tegra_gpio_mask_write(struct tegra_gpio_info *tgi, u32 reg, + unsigned int gpio, u32 value) +{ + u32 val; + + val = 0x100 << GPIO_BIT(gpio); + if (value) + val |= 1 << GPIO_BIT(gpio); + tegra_gpio_writel(tgi, val, reg); +} + +static void tegra_gpio_enable(struct tegra_gpio_info *tgi, unsigned int gpio) +{ + tegra_gpio_mask_write(tgi, GPIO_MSK_CNF(tgi, gpio), gpio, 1); +} + +static void tegra_gpio_disable(struct tegra_gpio_info *tgi, unsigned int gpio) +{ + tegra_gpio_mask_write(tgi, GPIO_MSK_CNF(tgi, gpio), gpio, 0); +} + +static int tegra_gpio_request(struct gpio_chip *chip, unsigned int offset) +{ + return pinctrl_gpio_request(offset); +} + +static void tegra_gpio_free(struct gpio_chip *chip, unsigned int offset) +{ + struct tegra_gpio_info *tgi = gpiochip_get_data(chip); + + pinctrl_gpio_free(offset); + tegra_gpio_disable(tgi, offset); +} + +static void tegra_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct tegra_gpio_info *tgi = gpiochip_get_data(chip); + + tegra_gpio_mask_write(tgi, GPIO_MSK_OUT(tgi, offset), offset, value); +} + +static int tegra_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct tegra_gpio_info *tgi = gpiochip_get_data(chip); + unsigned int bval = BIT(GPIO_BIT(offset)); + + /* If gpio is in output mode then read from the out value */ + if (tegra_gpio_readl(tgi, GPIO_OE(tgi, offset)) & bval) + return !!(tegra_gpio_readl(tgi, GPIO_OUT(tgi, offset)) & bval); + + return !!(tegra_gpio_readl(tgi, GPIO_IN(tgi, offset)) & bval); +} + +static int tegra_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct tegra_gpio_info *tgi = gpiochip_get_data(chip); + + tegra_gpio_mask_write(tgi, GPIO_MSK_OE(tgi, offset), offset, 0); + tegra_gpio_enable(tgi, offset); + return 0; +} + +static int tegra_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, + int value) +{ + struct tegra_gpio_info *tgi = gpiochip_get_data(chip); + + tegra_gpio_set(chip, offset, value); + tegra_gpio_mask_write(tgi, GPIO_MSK_OE(tgi, offset), offset, 1); + tegra_gpio_enable(tgi, offset); + return 0; +} + +static int tegra_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct tegra_gpio_info *tgi = gpiochip_get_data(chip); + u32 pin_mask = BIT(GPIO_BIT(offset)); + u32 cnf, oe; + + cnf = tegra_gpio_readl(tgi, GPIO_CNF(tgi, offset)); + if (!(cnf & pin_mask)) + return -EINVAL; + + oe = tegra_gpio_readl(tgi, GPIO_OE(tgi, offset)); + + return !(oe & pin_mask); +} + +static int tegra_gpio_set_debounce(struct gpio_chip *chip, unsigned int offset, + unsigned int debounce) +{ + struct tegra_gpio_info *tgi = gpiochip_get_data(chip); + struct tegra_gpio_bank *bank = &tgi->bank_info[GPIO_BANK(offset)]; + unsigned int debounce_ms = DIV_ROUND_UP(debounce, 1000); + unsigned long flags; + unsigned int port; + + if (!debounce_ms) { + tegra_gpio_mask_write(tgi, GPIO_MSK_DBC_EN(tgi, offset), + offset, 0); + return 0; + } + + debounce_ms = min(debounce_ms, 255U); + port = GPIO_PORT(offset); + + /* There is only one debounce count register per port and hence + * set the maximum of current and requested debounce time. + */ + spin_lock_irqsave(&bank->dbc_lock[port], flags); + if (bank->dbc_cnt[port] < debounce_ms) { + tegra_gpio_writel(tgi, debounce_ms, GPIO_DBC_CNT(tgi, offset)); + bank->dbc_cnt[port] = debounce_ms; + } + spin_unlock_irqrestore(&bank->dbc_lock[port], flags); + + tegra_gpio_mask_write(tgi, GPIO_MSK_DBC_EN(tgi, offset), offset, 1); + + return 0; +} + +static int tegra_gpio_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + u32 debounce; + + if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) + return -ENOTSUPP; + + debounce = pinconf_to_config_argument(config); + return tegra_gpio_set_debounce(chip, offset, debounce); +} + +static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned int offset) +{ + struct tegra_gpio_info *tgi = gpiochip_get_data(chip); + + return irq_find_mapping(tgi->irq_domain, offset); +} + +static void tegra_gpio_irq_ack(struct irq_data *d) +{ + struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); + struct tegra_gpio_info *tgi = bank->tgi; + unsigned int gpio = d->hwirq; + + tegra_gpio_writel(tgi, 1 << GPIO_BIT(gpio), GPIO_INT_CLR(tgi, gpio)); +} + +static void tegra_gpio_irq_mask(struct irq_data *d) +{ + struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); + struct tegra_gpio_info *tgi = bank->tgi; + unsigned int gpio = d->hwirq; + + tegra_gpio_mask_write(tgi, GPIO_MSK_INT_ENB(tgi, gpio), gpio, 0); +} + +static void tegra_gpio_irq_unmask(struct irq_data *d) +{ + struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); + struct tegra_gpio_info *tgi = bank->tgi; + unsigned int gpio = d->hwirq; + + tegra_gpio_mask_write(tgi, GPIO_MSK_INT_ENB(tgi, gpio), gpio, 1); +} + +static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + unsigned int gpio = d->hwirq, port = GPIO_PORT(gpio), lvl_type; + struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); + struct tegra_gpio_info *tgi = bank->tgi; + unsigned long flags; + u32 val; + int ret; + + switch (type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_EDGE_RISING: + lvl_type = GPIO_INT_LVL_EDGE_RISING; + break; + + case IRQ_TYPE_EDGE_FALLING: + lvl_type = GPIO_INT_LVL_EDGE_FALLING; + break; + + case IRQ_TYPE_EDGE_BOTH: + lvl_type = GPIO_INT_LVL_EDGE_BOTH; + break; + + case IRQ_TYPE_LEVEL_HIGH: + lvl_type = GPIO_INT_LVL_LEVEL_HIGH; + break; + + case IRQ_TYPE_LEVEL_LOW: + lvl_type = GPIO_INT_LVL_LEVEL_LOW; + break; + + default: + return -EINVAL; + } + + spin_lock_irqsave(&bank->lvl_lock[port], flags); + + val = tegra_gpio_readl(tgi, GPIO_INT_LVL(tgi, gpio)); + val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio)); + val |= lvl_type << GPIO_BIT(gpio); + tegra_gpio_writel(tgi, val, GPIO_INT_LVL(tgi, gpio)); + + spin_unlock_irqrestore(&bank->lvl_lock[port], flags); + + tegra_gpio_mask_write(tgi, GPIO_MSK_OE(tgi, gpio), gpio, 0); + tegra_gpio_enable(tgi, gpio); + + ret = gpiochip_lock_as_irq(&tgi->gc, gpio); + if (ret) { + dev_err(tgi->dev, + "unable to lock Tegra GPIO %u as IRQ\n", gpio); + tegra_gpio_disable(tgi, gpio); + return ret; + } + + if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) + irq_set_handler_locked(d, handle_level_irq); + else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + irq_set_handler_locked(d, handle_edge_irq); + + return 0; +} + +static void tegra_gpio_irq_shutdown(struct irq_data *d) +{ + struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); + struct tegra_gpio_info *tgi = bank->tgi; + unsigned int gpio = d->hwirq; + + tegra_gpio_irq_mask(d); + gpiochip_unlock_as_irq(&tgi->gc, gpio); +} + +static void tegra_gpio_irq_handler(struct irq_desc *desc) +{ + unsigned int port, pin, gpio; + bool unmasked = false; + u32 lvl; + unsigned long sta; + struct irq_chip *chip = irq_desc_get_chip(desc); + struct tegra_gpio_bank *bank = irq_desc_get_handler_data(desc); + struct tegra_gpio_info *tgi = bank->tgi; + + chained_irq_enter(chip, desc); + + for (port = 0; port < 4; port++) { + gpio = tegra_gpio_compose(bank->bank, port, 0); + sta = tegra_gpio_readl(tgi, GPIO_INT_STA(tgi, gpio)) & + tegra_gpio_readl(tgi, GPIO_INT_ENB(tgi, gpio)); + lvl = tegra_gpio_readl(tgi, GPIO_INT_LVL(tgi, gpio)); + + for_each_set_bit(pin, &sta, 8) { + tegra_gpio_writel(tgi, 1 << pin, + GPIO_INT_CLR(tgi, gpio)); + + /* if gpio is edge triggered, clear condition + * before executing the handler so that we don't + * miss edges + */ + if (!unmasked && lvl & (0x100 << pin)) { + unmasked = true; + chained_irq_exit(chip, desc); + } + + generic_handle_irq(irq_find_mapping(tgi->irq_domain, + gpio + pin)); + } + } + + if (!unmasked) + chained_irq_exit(chip, desc); + +} + +#ifdef CONFIG_PM_SLEEP +static int tegra_gpio_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct tegra_gpio_info *tgi = platform_get_drvdata(pdev); + unsigned long flags; + unsigned int b, p; + + local_irq_save(flags); + + for (b = 0; b < tgi->bank_count; b++) { + struct tegra_gpio_bank *bank = &tgi->bank_info[b]; + + for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { + unsigned int gpio = (b << 5) | (p << 3); + + tegra_gpio_writel(tgi, bank->cnf[p], + GPIO_CNF(tgi, gpio)); + + if (tgi->soc->debounce_supported) { + tegra_gpio_writel(tgi, bank->dbc_cnt[p], + GPIO_DBC_CNT(tgi, gpio)); + tegra_gpio_writel(tgi, bank->dbc_enb[p], + GPIO_MSK_DBC_EN(tgi, gpio)); + } + + tegra_gpio_writel(tgi, bank->out[p], + GPIO_OUT(tgi, gpio)); + tegra_gpio_writel(tgi, bank->oe[p], + GPIO_OE(tgi, gpio)); + tegra_gpio_writel(tgi, bank->int_lvl[p], + GPIO_INT_LVL(tgi, gpio)); + tegra_gpio_writel(tgi, bank->int_enb[p], + GPIO_INT_ENB(tgi, gpio)); + } + } + + local_irq_restore(flags); + return 0; +} + +static int tegra_gpio_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct tegra_gpio_info *tgi = platform_get_drvdata(pdev); + unsigned long flags; + unsigned int b, p; + + local_irq_save(flags); + for (b = 0; b < tgi->bank_count; b++) { + struct tegra_gpio_bank *bank = &tgi->bank_info[b]; + + for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { + unsigned int gpio = (b << 5) | (p << 3); + + bank->cnf[p] = tegra_gpio_readl(tgi, + GPIO_CNF(tgi, gpio)); + bank->out[p] = tegra_gpio_readl(tgi, + GPIO_OUT(tgi, gpio)); + bank->oe[p] = tegra_gpio_readl(tgi, + GPIO_OE(tgi, gpio)); + if (tgi->soc->debounce_supported) { + bank->dbc_enb[p] = tegra_gpio_readl(tgi, + GPIO_MSK_DBC_EN(tgi, gpio)); + bank->dbc_enb[p] = (bank->dbc_enb[p] << 8) | + bank->dbc_enb[p]; + } + + bank->int_enb[p] = tegra_gpio_readl(tgi, + GPIO_INT_ENB(tgi, gpio)); + bank->int_lvl[p] = tegra_gpio_readl(tgi, + GPIO_INT_LVL(tgi, gpio)); + + /* Enable gpio irq for wake up source */ + tegra_gpio_writel(tgi, bank->wake_enb[p], + GPIO_INT_ENB(tgi, gpio)); + } + } + local_irq_restore(flags); + return 0; +} + +static int tegra_gpio_irq_set_wake(struct irq_data *d, unsigned int enable) +{ + struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); + unsigned int gpio = d->hwirq; + u32 port, bit, mask; + + port = GPIO_PORT(gpio); + bit = GPIO_BIT(gpio); + mask = BIT(bit); + + if (enable) + bank->wake_enb[port] |= mask; + else + bank->wake_enb[port] &= ~mask; + + return irq_set_irq_wake(bank->irq, enable); +} +#endif + +#ifdef CONFIG_DEBUG_FS + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +static int tegra_dbg_gpio_show(struct seq_file *s, void *unused) +{ + struct tegra_gpio_info *tgi = s->private; + unsigned int i, j; + + for (i = 0; i < tgi->bank_count; i++) { + for (j = 0; j < 4; j++) { + unsigned int gpio = tegra_gpio_compose(i, j, 0); + + seq_printf(s, + "%u:%u %02x %02x %02x %02x %02x %02x %06x\n", + i, j, + tegra_gpio_readl(tgi, GPIO_CNF(tgi, gpio)), + tegra_gpio_readl(tgi, GPIO_OE(tgi, gpio)), + tegra_gpio_readl(tgi, GPIO_OUT(tgi, gpio)), + tegra_gpio_readl(tgi, GPIO_IN(tgi, gpio)), + tegra_gpio_readl(tgi, GPIO_INT_STA(tgi, gpio)), + tegra_gpio_readl(tgi, GPIO_INT_ENB(tgi, gpio)), + tegra_gpio_readl(tgi, GPIO_INT_LVL(tgi, gpio))); + } + } + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(tegra_dbg_gpio); + +static void tegra_gpio_debuginit(struct tegra_gpio_info *tgi) +{ + (void) debugfs_create_file("tegra_gpio", 0444, + NULL, tgi, &tegra_dbg_gpio_fops); +} + +#else + +static inline void tegra_gpio_debuginit(struct tegra_gpio_info *tgi) +{ +} + +#endif + +static const struct dev_pm_ops tegra_gpio_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(tegra_gpio_suspend, tegra_gpio_resume) +}; + +static int tegra_gpio_probe(struct platform_device *pdev) +{ + struct tegra_gpio_info *tgi; + struct resource *res; + struct tegra_gpio_bank *bank; + unsigned int gpio, i, j; + int ret; + + tgi = devm_kzalloc(&pdev->dev, sizeof(*tgi), GFP_KERNEL); + if (!tgi) + return -ENODEV; + + tgi->soc = of_device_get_match_data(&pdev->dev); + tgi->dev = &pdev->dev; + + ret = platform_irq_count(pdev); + if (ret < 0) + return ret; + + tgi->bank_count = ret; + + if (!tgi->bank_count) { + dev_err(&pdev->dev, "Missing IRQ resource\n"); + return -ENODEV; + } + + tgi->gc.label = "tegra-gpio"; + tgi->gc.request = tegra_gpio_request; + tgi->gc.free = tegra_gpio_free; + tgi->gc.direction_input = tegra_gpio_direction_input; + tgi->gc.get = tegra_gpio_get; + tgi->gc.direction_output = tegra_gpio_direction_output; + tgi->gc.set = tegra_gpio_set; + tgi->gc.get_direction = tegra_gpio_get_direction; + tgi->gc.to_irq = tegra_gpio_to_irq; + tgi->gc.base = 0; + tgi->gc.ngpio = tgi->bank_count * 32; + tgi->gc.parent = &pdev->dev; + tgi->gc.of_node = pdev->dev.of_node; + + tgi->ic.name = "GPIO"; + tgi->ic.irq_ack = tegra_gpio_irq_ack; + tgi->ic.irq_mask = tegra_gpio_irq_mask; + tgi->ic.irq_unmask = tegra_gpio_irq_unmask; + tgi->ic.irq_set_type = tegra_gpio_irq_set_type; + tgi->ic.irq_shutdown = tegra_gpio_irq_shutdown; +#ifdef CONFIG_PM_SLEEP + tgi->ic.irq_set_wake = tegra_gpio_irq_set_wake; +#endif + + platform_set_drvdata(pdev, tgi); + + if (tgi->soc->debounce_supported) + tgi->gc.set_config = tegra_gpio_set_config; + + tgi->bank_info = devm_kcalloc(&pdev->dev, tgi->bank_count, + sizeof(*tgi->bank_info), GFP_KERNEL); + if (!tgi->bank_info) + return -ENOMEM; + + tgi->irq_domain = irq_domain_add_linear(pdev->dev.of_node, + tgi->gc.ngpio, + &irq_domain_simple_ops, NULL); + if (!tgi->irq_domain) + return -ENODEV; + + for (i = 0; i < tgi->bank_count; i++) { + ret = platform_get_irq(pdev, i); + if (ret < 0) { + dev_err(&pdev->dev, "Missing IRQ resource: %d\n", ret); + return ret; + } + + bank = &tgi->bank_info[i]; + bank->bank = i; + bank->irq = ret; + bank->tgi = tgi; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + tgi->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(tgi->regs)) + return PTR_ERR(tgi->regs); + + for (i = 0; i < tgi->bank_count; i++) { + for (j = 0; j < 4; j++) { + int gpio = tegra_gpio_compose(i, j, 0); + + tegra_gpio_writel(tgi, 0x00, GPIO_INT_ENB(tgi, gpio)); + } + } + + ret = devm_gpiochip_add_data(&pdev->dev, &tgi->gc, tgi); + if (ret < 0) { + irq_domain_remove(tgi->irq_domain); + return ret; + } + + for (gpio = 0; gpio < tgi->gc.ngpio; gpio++) { + int irq = irq_create_mapping(tgi->irq_domain, gpio); + /* No validity check; all Tegra GPIOs are valid IRQs */ + + bank = &tgi->bank_info[GPIO_BANK(gpio)]; + + irq_set_chip_data(irq, bank); + irq_set_chip_and_handler(irq, &tgi->ic, handle_simple_irq); + } + + for (i = 0; i < tgi->bank_count; i++) { + bank = &tgi->bank_info[i]; + + irq_set_chained_handler_and_data(bank->irq, + tegra_gpio_irq_handler, bank); + + for (j = 0; j < 4; j++) { + spin_lock_init(&bank->lvl_lock[j]); + spin_lock_init(&bank->dbc_lock[j]); + } + } + + tegra_gpio_debuginit(tgi); + + return 0; +} + +static const struct tegra_gpio_soc_config tegra20_gpio_config = { + .bank_stride = 0x80, + .upper_offset = 0x800, +}; + +static const struct tegra_gpio_soc_config tegra30_gpio_config = { + .bank_stride = 0x100, + .upper_offset = 0x80, +}; + +static const struct tegra_gpio_soc_config tegra210_gpio_config = { + .debounce_supported = true, + .bank_stride = 0x100, + .upper_offset = 0x80, +}; + +static const struct of_device_id tegra_gpio_of_match[] = { + { .compatible = "nvidia,tegra210-gpio", .data = &tegra210_gpio_config }, + { .compatible = "nvidia,tegra30-gpio", .data = &tegra30_gpio_config }, + { .compatible = "nvidia,tegra20-gpio", .data = &tegra20_gpio_config }, + { }, +}; + +static struct platform_driver tegra_gpio_driver = { + .driver = { + .name = "tegra-gpio", + .pm = &tegra_gpio_pm_ops, + .of_match_table = tegra_gpio_of_match, + }, + .probe = tegra_gpio_probe, +}; + +static int __init tegra_gpio_init(void) +{ + return platform_driver_register(&tegra_gpio_driver); +} +subsys_initcall(tegra_gpio_init); diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c new file mode 100644 index 000000000..4c9e7a201 --- /dev/null +++ b/drivers/gpio/gpio-tegra186.c @@ -0,0 +1,700 @@ +/* + * Copyright (c) 2016-2017 NVIDIA Corporation + * + * Author: Thierry Reding <treding@nvidia.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + */ + +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> + +#include <dt-bindings/gpio/tegra186-gpio.h> +#include <dt-bindings/gpio/tegra194-gpio.h> + +#define TEGRA186_GPIO_ENABLE_CONFIG 0x00 +#define TEGRA186_GPIO_ENABLE_CONFIG_ENABLE BIT(0) +#define TEGRA186_GPIO_ENABLE_CONFIG_OUT BIT(1) +#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_NONE (0x0 << 2) +#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_LEVEL (0x1 << 2) +#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_SINGLE_EDGE (0x2 << 2) +#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_DOUBLE_EDGE (0x3 << 2) +#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_MASK (0x3 << 2) +#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL BIT(4) +#define TEGRA186_GPIO_ENABLE_CONFIG_INTERRUPT BIT(6) + +#define TEGRA186_GPIO_DEBOUNCE_CONTROL 0x04 +#define TEGRA186_GPIO_DEBOUNCE_CONTROL_THRESHOLD(x) ((x) & 0xff) + +#define TEGRA186_GPIO_INPUT 0x08 +#define TEGRA186_GPIO_INPUT_HIGH BIT(0) + +#define TEGRA186_GPIO_OUTPUT_CONTROL 0x0c +#define TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED BIT(0) + +#define TEGRA186_GPIO_OUTPUT_VALUE 0x10 +#define TEGRA186_GPIO_OUTPUT_VALUE_HIGH BIT(0) + +#define TEGRA186_GPIO_INTERRUPT_CLEAR 0x14 + +#define TEGRA186_GPIO_INTERRUPT_STATUS(x) (0x100 + (x) * 4) + +struct tegra_gpio_port { + const char *name; + unsigned int offset; + unsigned int pins; + unsigned int irq; +}; + +struct tegra_gpio_soc { + const struct tegra_gpio_port *ports; + unsigned int num_ports; + const char *name; +}; + +struct tegra_gpio { + struct gpio_chip gpio; + struct irq_chip intc; + unsigned int num_irq; + unsigned int *irq; + + const struct tegra_gpio_soc *soc; + + void __iomem *base; +}; + +static const struct tegra_gpio_port * +tegra186_gpio_get_port(struct tegra_gpio *gpio, unsigned int *pin) +{ + unsigned int start = 0, i; + + for (i = 0; i < gpio->soc->num_ports; i++) { + const struct tegra_gpio_port *port = &gpio->soc->ports[i]; + + if (*pin >= start && *pin < start + port->pins) { + *pin -= start; + return port; + } + + start += port->pins; + } + + return NULL; +} + +static void __iomem *tegra186_gpio_get_base(struct tegra_gpio *gpio, + unsigned int pin) +{ + const struct tegra_gpio_port *port; + + port = tegra186_gpio_get_port(gpio, &pin); + if (!port) + return NULL; + + return gpio->base + port->offset + pin * 0x20; +} + +static int tegra186_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct tegra_gpio *gpio = gpiochip_get_data(chip); + void __iomem *base; + u32 value; + + base = tegra186_gpio_get_base(gpio, offset); + if (WARN_ON(base == NULL)) + return -ENODEV; + + value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG); + if (value & TEGRA186_GPIO_ENABLE_CONFIG_OUT) + return 0; + + return 1; +} + +static int tegra186_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct tegra_gpio *gpio = gpiochip_get_data(chip); + void __iomem *base; + u32 value; + + base = tegra186_gpio_get_base(gpio, offset); + if (WARN_ON(base == NULL)) + return -ENODEV; + + value = readl(base + TEGRA186_GPIO_OUTPUT_CONTROL); + value |= TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED; + writel(value, base + TEGRA186_GPIO_OUTPUT_CONTROL); + + value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG); + value |= TEGRA186_GPIO_ENABLE_CONFIG_ENABLE; + value &= ~TEGRA186_GPIO_ENABLE_CONFIG_OUT; + writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG); + + return 0; +} + +static int tegra186_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int level) +{ + struct tegra_gpio *gpio = gpiochip_get_data(chip); + void __iomem *base; + u32 value; + + /* configure output level first */ + chip->set(chip, offset, level); + + base = tegra186_gpio_get_base(gpio, offset); + if (WARN_ON(base == NULL)) + return -EINVAL; + + /* set the direction */ + value = readl(base + TEGRA186_GPIO_OUTPUT_CONTROL); + value &= ~TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED; + writel(value, base + TEGRA186_GPIO_OUTPUT_CONTROL); + + value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG); + value |= TEGRA186_GPIO_ENABLE_CONFIG_ENABLE; + value |= TEGRA186_GPIO_ENABLE_CONFIG_OUT; + writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG); + + return 0; +} + +static int tegra186_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct tegra_gpio *gpio = gpiochip_get_data(chip); + void __iomem *base; + u32 value; + + base = tegra186_gpio_get_base(gpio, offset); + if (WARN_ON(base == NULL)) + return -ENODEV; + + value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG); + if (value & TEGRA186_GPIO_ENABLE_CONFIG_OUT) + value = readl(base + TEGRA186_GPIO_OUTPUT_VALUE); + else + value = readl(base + TEGRA186_GPIO_INPUT); + + return value & BIT(0); +} + +static void tegra186_gpio_set(struct gpio_chip *chip, unsigned int offset, + int level) +{ + struct tegra_gpio *gpio = gpiochip_get_data(chip); + void __iomem *base; + u32 value; + + base = tegra186_gpio_get_base(gpio, offset); + if (WARN_ON(base == NULL)) + return; + + value = readl(base + TEGRA186_GPIO_OUTPUT_VALUE); + if (level == 0) + value &= ~TEGRA186_GPIO_OUTPUT_VALUE_HIGH; + else + value |= TEGRA186_GPIO_OUTPUT_VALUE_HIGH; + + writel(value, base + TEGRA186_GPIO_OUTPUT_VALUE); +} + +static int tegra186_gpio_of_xlate(struct gpio_chip *chip, + const struct of_phandle_args *spec, + u32 *flags) +{ + struct tegra_gpio *gpio = gpiochip_get_data(chip); + unsigned int port, pin, i, offset = 0; + + if (WARN_ON(chip->of_gpio_n_cells < 2)) + return -EINVAL; + + if (WARN_ON(spec->args_count < chip->of_gpio_n_cells)) + return -EINVAL; + + port = spec->args[0] / 8; + pin = spec->args[0] % 8; + + if (port >= gpio->soc->num_ports) { + dev_err(chip->parent, "invalid port number: %u\n", port); + return -EINVAL; + } + + for (i = 0; i < port; i++) + offset += gpio->soc->ports[i].pins; + + if (flags) + *flags = spec->args[1]; + + return offset + pin; +} + +#define to_tegra_gpio(x) container_of((x), struct tegra_gpio, gpio) + +static void tegra186_irq_ack(struct irq_data *data) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct tegra_gpio *gpio = to_tegra_gpio(gc); + void __iomem *base; + + base = tegra186_gpio_get_base(gpio, data->hwirq); + if (WARN_ON(base == NULL)) + return; + + writel(1, base + TEGRA186_GPIO_INTERRUPT_CLEAR); +} + +static void tegra186_irq_mask(struct irq_data *data) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct tegra_gpio *gpio = to_tegra_gpio(gc); + void __iomem *base; + u32 value; + + base = tegra186_gpio_get_base(gpio, data->hwirq); + if (WARN_ON(base == NULL)) + return; + + value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG); + value &= ~TEGRA186_GPIO_ENABLE_CONFIG_INTERRUPT; + writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG); +} + +static void tegra186_irq_unmask(struct irq_data *data) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct tegra_gpio *gpio = to_tegra_gpio(gc); + void __iomem *base; + u32 value; + + base = tegra186_gpio_get_base(gpio, data->hwirq); + if (WARN_ON(base == NULL)) + return; + + value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG); + value |= TEGRA186_GPIO_ENABLE_CONFIG_INTERRUPT; + writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG); +} + +static int tegra186_irq_set_type(struct irq_data *data, unsigned int flow) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct tegra_gpio *gpio = to_tegra_gpio(gc); + void __iomem *base; + u32 value; + + base = tegra186_gpio_get_base(gpio, data->hwirq); + if (WARN_ON(base == NULL)) + return -ENODEV; + + value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG); + value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_MASK; + value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL; + + switch (flow & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_NONE: + break; + + case IRQ_TYPE_EDGE_RISING: + value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_SINGLE_EDGE; + value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL; + break; + + case IRQ_TYPE_EDGE_FALLING: + value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_SINGLE_EDGE; + break; + + case IRQ_TYPE_EDGE_BOTH: + value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_DOUBLE_EDGE; + break; + + case IRQ_TYPE_LEVEL_HIGH: + value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_LEVEL; + value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL; + break; + + case IRQ_TYPE_LEVEL_LOW: + value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_LEVEL; + break; + + default: + return -EINVAL; + } + + writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG); + + if ((flow & IRQ_TYPE_EDGE_BOTH) == 0) + irq_set_handler_locked(data, handle_level_irq); + else + irq_set_handler_locked(data, handle_edge_irq); + + return 0; +} + +static void tegra186_gpio_irq(struct irq_desc *desc) +{ + struct tegra_gpio *gpio = irq_desc_get_handler_data(desc); + struct irq_domain *domain = gpio->gpio.irq.domain; + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned int parent = irq_desc_get_irq(desc); + unsigned int i, offset = 0; + + chained_irq_enter(chip, desc); + + for (i = 0; i < gpio->soc->num_ports; i++) { + const struct tegra_gpio_port *port = &gpio->soc->ports[i]; + void __iomem *base = gpio->base + port->offset; + unsigned int pin, irq; + unsigned long value; + + /* skip ports that are not associated with this controller */ + if (parent != gpio->irq[port->irq]) + goto skip; + + value = readl(base + TEGRA186_GPIO_INTERRUPT_STATUS(1)); + + for_each_set_bit(pin, &value, port->pins) { + irq = irq_find_mapping(domain, offset + pin); + if (WARN_ON(irq == 0)) + continue; + + generic_handle_irq(irq); + } + +skip: + offset += port->pins; + } + + chained_irq_exit(chip, desc); +} + +static int tegra186_gpio_irq_domain_xlate(struct irq_domain *domain, + struct device_node *np, + const u32 *spec, unsigned int size, + unsigned long *hwirq, + unsigned int *type) +{ + struct tegra_gpio *gpio = gpiochip_get_data(domain->host_data); + unsigned int port, pin, i, offset = 0; + + if (size < 2) + return -EINVAL; + + port = spec[0] / 8; + pin = spec[0] % 8; + + if (port >= gpio->soc->num_ports) { + dev_err(gpio->gpio.parent, "invalid port number: %u\n", port); + return -EINVAL; + } + + for (i = 0; i < port; i++) + offset += gpio->soc->ports[i].pins; + + *type = spec[1] & IRQ_TYPE_SENSE_MASK; + *hwirq = offset + pin; + + return 0; +} + +static const struct irq_domain_ops tegra186_gpio_irq_domain_ops = { + .map = gpiochip_irq_map, + .unmap = gpiochip_irq_unmap, + .xlate = tegra186_gpio_irq_domain_xlate, +}; + +static int tegra186_gpio_probe(struct platform_device *pdev) +{ + unsigned int i, j, offset; + struct gpio_irq_chip *irq; + struct tegra_gpio *gpio; + struct resource *res; + char **names; + int err; + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + gpio->soc = of_device_get_match_data(&pdev->dev); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gpio"); + gpio->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(gpio->base)) + return PTR_ERR(gpio->base); + + err = platform_irq_count(pdev); + if (err < 0) + return err; + + gpio->num_irq = err; + + gpio->irq = devm_kcalloc(&pdev->dev, gpio->num_irq, sizeof(*gpio->irq), + GFP_KERNEL); + if (!gpio->irq) + return -ENOMEM; + + for (i = 0; i < gpio->num_irq; i++) { + err = platform_get_irq(pdev, i); + if (err < 0) + return err; + + gpio->irq[i] = err; + } + + gpio->gpio.label = gpio->soc->name; + gpio->gpio.parent = &pdev->dev; + + gpio->gpio.get_direction = tegra186_gpio_get_direction; + gpio->gpio.direction_input = tegra186_gpio_direction_input; + gpio->gpio.direction_output = tegra186_gpio_direction_output; + gpio->gpio.get = tegra186_gpio_get, + gpio->gpio.set = tegra186_gpio_set; + + gpio->gpio.base = -1; + + for (i = 0; i < gpio->soc->num_ports; i++) + gpio->gpio.ngpio += gpio->soc->ports[i].pins; + + names = devm_kcalloc(gpio->gpio.parent, gpio->gpio.ngpio, + sizeof(*names), GFP_KERNEL); + if (!names) + return -ENOMEM; + + for (i = 0, offset = 0; i < gpio->soc->num_ports; i++) { + const struct tegra_gpio_port *port = &gpio->soc->ports[i]; + char *name; + + for (j = 0; j < port->pins; j++) { + name = devm_kasprintf(gpio->gpio.parent, GFP_KERNEL, + "P%s.%02x", port->name, j); + if (!name) + return -ENOMEM; + + names[offset + j] = name; + } + + offset += port->pins; + } + + gpio->gpio.names = (const char * const *)names; + + gpio->gpio.of_node = pdev->dev.of_node; + gpio->gpio.of_gpio_n_cells = 2; + gpio->gpio.of_xlate = tegra186_gpio_of_xlate; + + gpio->intc.name = pdev->dev.of_node->name; + gpio->intc.irq_ack = tegra186_irq_ack; + gpio->intc.irq_mask = tegra186_irq_mask; + gpio->intc.irq_unmask = tegra186_irq_unmask; + gpio->intc.irq_set_type = tegra186_irq_set_type; + + irq = &gpio->gpio.irq; + irq->chip = &gpio->intc; + irq->domain_ops = &tegra186_gpio_irq_domain_ops; + irq->handler = handle_simple_irq; + irq->default_type = IRQ_TYPE_NONE; + irq->parent_handler = tegra186_gpio_irq; + irq->parent_handler_data = gpio; + irq->num_parents = gpio->num_irq; + irq->parents = gpio->irq; + + irq->map = devm_kcalloc(&pdev->dev, gpio->gpio.ngpio, + sizeof(*irq->map), GFP_KERNEL); + if (!irq->map) + return -ENOMEM; + + for (i = 0, offset = 0; i < gpio->soc->num_ports; i++) { + const struct tegra_gpio_port *port = &gpio->soc->ports[i]; + + for (j = 0; j < port->pins; j++) + irq->map[offset + j] = irq->parents[port->irq]; + + offset += port->pins; + } + + platform_set_drvdata(pdev, gpio); + + err = devm_gpiochip_add_data(&pdev->dev, &gpio->gpio, gpio); + if (err < 0) + return err; + + return 0; +} + +static int tegra186_gpio_remove(struct platform_device *pdev) +{ + return 0; +} + +#define TEGRA_MAIN_GPIO_PORT(port, base, count, controller) \ + [TEGRA_MAIN_GPIO_PORT_##port] = { \ + .name = #port, \ + .offset = base, \ + .pins = count, \ + .irq = controller, \ + } + +static const struct tegra_gpio_port tegra186_main_ports[] = { + TEGRA_MAIN_GPIO_PORT( A, 0x2000, 7, 2), + TEGRA_MAIN_GPIO_PORT( B, 0x3000, 7, 3), + TEGRA_MAIN_GPIO_PORT( C, 0x3200, 7, 3), + TEGRA_MAIN_GPIO_PORT( D, 0x3400, 6, 3), + TEGRA_MAIN_GPIO_PORT( E, 0x2200, 8, 2), + TEGRA_MAIN_GPIO_PORT( F, 0x2400, 6, 2), + TEGRA_MAIN_GPIO_PORT( G, 0x4200, 6, 4), + TEGRA_MAIN_GPIO_PORT( H, 0x1000, 7, 1), + TEGRA_MAIN_GPIO_PORT( I, 0x0800, 8, 0), + TEGRA_MAIN_GPIO_PORT( J, 0x5000, 8, 5), + TEGRA_MAIN_GPIO_PORT( K, 0x5200, 1, 5), + TEGRA_MAIN_GPIO_PORT( L, 0x1200, 8, 1), + TEGRA_MAIN_GPIO_PORT( M, 0x5600, 6, 5), + TEGRA_MAIN_GPIO_PORT( N, 0x0000, 7, 0), + TEGRA_MAIN_GPIO_PORT( O, 0x0200, 4, 0), + TEGRA_MAIN_GPIO_PORT( P, 0x4000, 7, 4), + TEGRA_MAIN_GPIO_PORT( Q, 0x0400, 6, 0), + TEGRA_MAIN_GPIO_PORT( R, 0x0a00, 6, 0), + TEGRA_MAIN_GPIO_PORT( T, 0x0600, 4, 0), + TEGRA_MAIN_GPIO_PORT( X, 0x1400, 8, 1), + TEGRA_MAIN_GPIO_PORT( Y, 0x1600, 7, 1), + TEGRA_MAIN_GPIO_PORT(BB, 0x2600, 2, 2), + TEGRA_MAIN_GPIO_PORT(CC, 0x5400, 4, 5), +}; + +static const struct tegra_gpio_soc tegra186_main_soc = { + .num_ports = ARRAY_SIZE(tegra186_main_ports), + .ports = tegra186_main_ports, + .name = "tegra186-gpio", +}; + +#define TEGRA_AON_GPIO_PORT(port, base, count, controller) \ + [TEGRA_AON_GPIO_PORT_##port] = { \ + .name = #port, \ + .offset = base, \ + .pins = count, \ + .irq = controller, \ + } + +static const struct tegra_gpio_port tegra186_aon_ports[] = { + TEGRA_AON_GPIO_PORT( S, 0x0200, 5, 0), + TEGRA_AON_GPIO_PORT( U, 0x0400, 6, 0), + TEGRA_AON_GPIO_PORT( V, 0x0800, 8, 0), + TEGRA_AON_GPIO_PORT( W, 0x0a00, 8, 0), + TEGRA_AON_GPIO_PORT( Z, 0x0e00, 4, 0), + TEGRA_AON_GPIO_PORT(AA, 0x0c00, 8, 0), + TEGRA_AON_GPIO_PORT(EE, 0x0600, 3, 0), + TEGRA_AON_GPIO_PORT(FF, 0x0000, 5, 0), +}; + +static const struct tegra_gpio_soc tegra186_aon_soc = { + .num_ports = ARRAY_SIZE(tegra186_aon_ports), + .ports = tegra186_aon_ports, + .name = "tegra186-gpio-aon", +}; + +#define TEGRA194_MAIN_GPIO_PORT(port, base, count, controller) \ + [TEGRA194_MAIN_GPIO_PORT_##port] = { \ + .name = #port, \ + .offset = base, \ + .pins = count, \ + .irq = controller, \ + } + +static const struct tegra_gpio_port tegra194_main_ports[] = { + TEGRA194_MAIN_GPIO_PORT( A, 0x1400, 8, 1), + TEGRA194_MAIN_GPIO_PORT( B, 0x4e00, 2, 4), + TEGRA194_MAIN_GPIO_PORT( C, 0x4600, 8, 4), + TEGRA194_MAIN_GPIO_PORT( D, 0x4800, 4, 4), + TEGRA194_MAIN_GPIO_PORT( E, 0x4a00, 8, 4), + TEGRA194_MAIN_GPIO_PORT( F, 0x4c00, 6, 4), + TEGRA194_MAIN_GPIO_PORT( G, 0x4000, 8, 4), + TEGRA194_MAIN_GPIO_PORT( H, 0x4200, 8, 4), + TEGRA194_MAIN_GPIO_PORT( I, 0x4400, 5, 4), + TEGRA194_MAIN_GPIO_PORT( J, 0x5200, 6, 5), + TEGRA194_MAIN_GPIO_PORT( K, 0x3000, 8, 3), + TEGRA194_MAIN_GPIO_PORT( L, 0x3200, 4, 3), + TEGRA194_MAIN_GPIO_PORT( M, 0x2600, 8, 2), + TEGRA194_MAIN_GPIO_PORT( N, 0x2800, 3, 2), + TEGRA194_MAIN_GPIO_PORT( O, 0x5000, 6, 5), + TEGRA194_MAIN_GPIO_PORT( P, 0x2a00, 8, 2), + TEGRA194_MAIN_GPIO_PORT( Q, 0x2c00, 8, 2), + TEGRA194_MAIN_GPIO_PORT( R, 0x2e00, 6, 2), + TEGRA194_MAIN_GPIO_PORT( S, 0x3600, 8, 3), + TEGRA194_MAIN_GPIO_PORT( T, 0x3800, 8, 3), + TEGRA194_MAIN_GPIO_PORT( U, 0x3a00, 1, 3), + TEGRA194_MAIN_GPIO_PORT( V, 0x1000, 8, 1), + TEGRA194_MAIN_GPIO_PORT( W, 0x1200, 2, 1), + TEGRA194_MAIN_GPIO_PORT( X, 0x2000, 8, 2), + TEGRA194_MAIN_GPIO_PORT( Y, 0x2200, 8, 2), + TEGRA194_MAIN_GPIO_PORT( Z, 0x2400, 8, 2), + TEGRA194_MAIN_GPIO_PORT(FF, 0x3400, 2, 3), + TEGRA194_MAIN_GPIO_PORT(GG, 0x0000, 2, 0) +}; + +static const struct tegra_gpio_soc tegra194_main_soc = { + .num_ports = ARRAY_SIZE(tegra194_main_ports), + .ports = tegra194_main_ports, + .name = "tegra194-gpio", +}; + +#define TEGRA194_AON_GPIO_PORT(port, base, count, controller) \ + [TEGRA194_AON_GPIO_PORT_##port] = { \ + .name = #port, \ + .offset = base, \ + .pins = count, \ + .irq = controller, \ + } + +static const struct tegra_gpio_port tegra194_aon_ports[] = { + TEGRA194_AON_GPIO_PORT(AA, 0x0600, 8, 0), + TEGRA194_AON_GPIO_PORT(BB, 0x0800, 4, 0), + TEGRA194_AON_GPIO_PORT(CC, 0x0200, 8, 0), + TEGRA194_AON_GPIO_PORT(DD, 0x0400, 3, 0), + TEGRA194_AON_GPIO_PORT(EE, 0x0000, 7, 0) +}; + +static const struct tegra_gpio_soc tegra194_aon_soc = { + .num_ports = ARRAY_SIZE(tegra194_aon_ports), + .ports = tegra194_aon_ports, + .name = "tegra194-gpio-aon", +}; + +static const struct of_device_id tegra186_gpio_of_match[] = { + { + .compatible = "nvidia,tegra186-gpio", + .data = &tegra186_main_soc + }, { + .compatible = "nvidia,tegra186-gpio-aon", + .data = &tegra186_aon_soc + }, { + .compatible = "nvidia,tegra194-gpio", + .data = &tegra194_main_soc + }, { + .compatible = "nvidia,tegra194-gpio-aon", + .data = &tegra194_aon_soc + }, { + /* sentinel */ + } +}; + +static struct platform_driver tegra186_gpio_driver = { + .driver = { + .name = "tegra186-gpio", + .of_match_table = tegra186_gpio_of_match, + }, + .probe = tegra186_gpio_probe, + .remove = tegra186_gpio_remove, +}; +module_platform_driver(tegra186_gpio_driver); + +MODULE_DESCRIPTION("NVIDIA Tegra186 GPIO controller driver"); +MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-thunderx.c b/drivers/gpio/gpio-thunderx.c new file mode 100644 index 000000000..1306722fa --- /dev/null +++ b/drivers/gpio/gpio-thunderx.c @@ -0,0 +1,629 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2016, 2017 Cavium Inc. + */ + +#include <linux/bitops.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/spinlock.h> + + +#define GPIO_RX_DAT 0x0 +#define GPIO_TX_SET 0x8 +#define GPIO_TX_CLR 0x10 +#define GPIO_CONST 0x90 +#define GPIO_CONST_GPIOS_MASK 0xff +#define GPIO_BIT_CFG 0x400 +#define GPIO_BIT_CFG_TX_OE BIT(0) +#define GPIO_BIT_CFG_PIN_XOR BIT(1) +#define GPIO_BIT_CFG_INT_EN BIT(2) +#define GPIO_BIT_CFG_INT_TYPE BIT(3) +#define GPIO_BIT_CFG_FIL_MASK GENMASK(11, 4) +#define GPIO_BIT_CFG_FIL_CNT_SHIFT 4 +#define GPIO_BIT_CFG_FIL_SEL_SHIFT 8 +#define GPIO_BIT_CFG_TX_OD BIT(12) +#define GPIO_BIT_CFG_PIN_SEL_MASK GENMASK(25, 16) +#define GPIO_INTR 0x800 +#define GPIO_INTR_INTR BIT(0) +#define GPIO_INTR_INTR_W1S BIT(1) +#define GPIO_INTR_ENA_W1C BIT(2) +#define GPIO_INTR_ENA_W1S BIT(3) +#define GPIO_2ND_BANK 0x1400 + +#define GLITCH_FILTER_400NS ((4u << GPIO_BIT_CFG_FIL_SEL_SHIFT) | \ + (9u << GPIO_BIT_CFG_FIL_CNT_SHIFT)) + +struct thunderx_gpio; + +struct thunderx_line { + struct thunderx_gpio *txgpio; + unsigned int line; + unsigned int fil_bits; +}; + +struct thunderx_gpio { + struct gpio_chip chip; + u8 __iomem *register_base; + struct irq_domain *irqd; + struct msix_entry *msix_entries; /* per line MSI-X */ + struct thunderx_line *line_entries; /* per line irq info */ + raw_spinlock_t lock; + unsigned long invert_mask[2]; + unsigned long od_mask[2]; + int base_msi; +}; + +static unsigned int bit_cfg_reg(unsigned int line) +{ + return 8 * line + GPIO_BIT_CFG; +} + +static unsigned int intr_reg(unsigned int line) +{ + return 8 * line + GPIO_INTR; +} + +static bool thunderx_gpio_is_gpio_nowarn(struct thunderx_gpio *txgpio, + unsigned int line) +{ + u64 bit_cfg = readq(txgpio->register_base + bit_cfg_reg(line)); + + return (bit_cfg & GPIO_BIT_CFG_PIN_SEL_MASK) == 0; +} + +/* + * Check (and WARN) that the pin is available for GPIO. We will not + * allow modification of the state of non-GPIO pins from this driver. + */ +static bool thunderx_gpio_is_gpio(struct thunderx_gpio *txgpio, + unsigned int line) +{ + bool rv = thunderx_gpio_is_gpio_nowarn(txgpio, line); + + WARN_RATELIMIT(!rv, "Pin %d not available for GPIO\n", line); + + return rv; +} + +static int thunderx_gpio_request(struct gpio_chip *chip, unsigned int line) +{ + struct thunderx_gpio *txgpio = gpiochip_get_data(chip); + + return thunderx_gpio_is_gpio(txgpio, line) ? 0 : -EIO; +} + +static int thunderx_gpio_dir_in(struct gpio_chip *chip, unsigned int line) +{ + struct thunderx_gpio *txgpio = gpiochip_get_data(chip); + + if (!thunderx_gpio_is_gpio(txgpio, line)) + return -EIO; + + raw_spin_lock(&txgpio->lock); + clear_bit(line, txgpio->invert_mask); + clear_bit(line, txgpio->od_mask); + writeq(txgpio->line_entries[line].fil_bits, + txgpio->register_base + bit_cfg_reg(line)); + raw_spin_unlock(&txgpio->lock); + return 0; +} + +static void thunderx_gpio_set(struct gpio_chip *chip, unsigned int line, + int value) +{ + struct thunderx_gpio *txgpio = gpiochip_get_data(chip); + int bank = line / 64; + int bank_bit = line % 64; + + void __iomem *reg = txgpio->register_base + + (bank * GPIO_2ND_BANK) + (value ? GPIO_TX_SET : GPIO_TX_CLR); + + writeq(BIT_ULL(bank_bit), reg); +} + +static int thunderx_gpio_dir_out(struct gpio_chip *chip, unsigned int line, + int value) +{ + struct thunderx_gpio *txgpio = gpiochip_get_data(chip); + u64 bit_cfg = txgpio->line_entries[line].fil_bits | GPIO_BIT_CFG_TX_OE; + + if (!thunderx_gpio_is_gpio(txgpio, line)) + return -EIO; + + raw_spin_lock(&txgpio->lock); + + thunderx_gpio_set(chip, line, value); + + if (test_bit(line, txgpio->invert_mask)) + bit_cfg |= GPIO_BIT_CFG_PIN_XOR; + + if (test_bit(line, txgpio->od_mask)) + bit_cfg |= GPIO_BIT_CFG_TX_OD; + + writeq(bit_cfg, txgpio->register_base + bit_cfg_reg(line)); + + raw_spin_unlock(&txgpio->lock); + return 0; +} + +static int thunderx_gpio_get_direction(struct gpio_chip *chip, unsigned int line) +{ + struct thunderx_gpio *txgpio = gpiochip_get_data(chip); + u64 bit_cfg; + + if (!thunderx_gpio_is_gpio_nowarn(txgpio, line)) + /* + * Say it is input for now to avoid WARNing on + * gpiochip_add_data(). We will WARN if someone + * requests it or tries to use it. + */ + return 1; + + bit_cfg = readq(txgpio->register_base + bit_cfg_reg(line)); + + return !(bit_cfg & GPIO_BIT_CFG_TX_OE); +} + +static int thunderx_gpio_set_config(struct gpio_chip *chip, + unsigned int line, + unsigned long cfg) +{ + bool orig_invert, orig_od, orig_dat, new_invert, new_od; + u32 arg, sel; + u64 bit_cfg; + int bank = line / 64; + int bank_bit = line % 64; + int ret = -ENOTSUPP; + struct thunderx_gpio *txgpio = gpiochip_get_data(chip); + void __iomem *reg = txgpio->register_base + (bank * GPIO_2ND_BANK) + GPIO_TX_SET; + + if (!thunderx_gpio_is_gpio(txgpio, line)) + return -EIO; + + raw_spin_lock(&txgpio->lock); + orig_invert = test_bit(line, txgpio->invert_mask); + new_invert = orig_invert; + orig_od = test_bit(line, txgpio->od_mask); + new_od = orig_od; + orig_dat = ((readq(reg) >> bank_bit) & 1) ^ orig_invert; + bit_cfg = readq(txgpio->register_base + bit_cfg_reg(line)); + switch (pinconf_to_config_param(cfg)) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + /* + * Weird, setting open-drain mode causes signal + * inversion. Note this so we can compensate in the + * dir_out function. + */ + set_bit(line, txgpio->invert_mask); + new_invert = true; + set_bit(line, txgpio->od_mask); + new_od = true; + ret = 0; + break; + case PIN_CONFIG_DRIVE_PUSH_PULL: + clear_bit(line, txgpio->invert_mask); + new_invert = false; + clear_bit(line, txgpio->od_mask); + new_od = false; + ret = 0; + break; + case PIN_CONFIG_INPUT_DEBOUNCE: + arg = pinconf_to_config_argument(cfg); + if (arg > 1228) { /* 15 * 2^15 * 2.5nS maximum */ + ret = -EINVAL; + break; + } + arg *= 400; /* scale to 2.5nS clocks. */ + sel = 0; + while (arg > 15) { + sel++; + arg++; /* always round up */ + arg >>= 1; + } + txgpio->line_entries[line].fil_bits = + (sel << GPIO_BIT_CFG_FIL_SEL_SHIFT) | + (arg << GPIO_BIT_CFG_FIL_CNT_SHIFT); + bit_cfg &= ~GPIO_BIT_CFG_FIL_MASK; + bit_cfg |= txgpio->line_entries[line].fil_bits; + writeq(bit_cfg, txgpio->register_base + bit_cfg_reg(line)); + ret = 0; + break; + default: + break; + } + raw_spin_unlock(&txgpio->lock); + + /* + * If currently output and OPEN_DRAIN changed, install the new + * settings + */ + if ((new_invert != orig_invert || new_od != orig_od) && + (bit_cfg & GPIO_BIT_CFG_TX_OE)) + ret = thunderx_gpio_dir_out(chip, line, orig_dat ^ new_invert); + + return ret; +} + +static int thunderx_gpio_get(struct gpio_chip *chip, unsigned int line) +{ + struct thunderx_gpio *txgpio = gpiochip_get_data(chip); + int bank = line / 64; + int bank_bit = line % 64; + u64 read_bits = readq(txgpio->register_base + (bank * GPIO_2ND_BANK) + GPIO_RX_DAT); + u64 masked_bits = read_bits & BIT_ULL(bank_bit); + + if (test_bit(line, txgpio->invert_mask)) + return masked_bits == 0; + else + return masked_bits != 0; +} + +static void thunderx_gpio_set_multiple(struct gpio_chip *chip, + unsigned long *mask, + unsigned long *bits) +{ + int bank; + u64 set_bits, clear_bits; + struct thunderx_gpio *txgpio = gpiochip_get_data(chip); + + for (bank = 0; bank <= chip->ngpio / 64; bank++) { + set_bits = bits[bank] & mask[bank]; + clear_bits = ~bits[bank] & mask[bank]; + writeq(set_bits, txgpio->register_base + (bank * GPIO_2ND_BANK) + GPIO_TX_SET); + writeq(clear_bits, txgpio->register_base + (bank * GPIO_2ND_BANK) + GPIO_TX_CLR); + } +} + +static void thunderx_gpio_irq_ack(struct irq_data *data) +{ + struct thunderx_line *txline = irq_data_get_irq_chip_data(data); + + writeq(GPIO_INTR_INTR, + txline->txgpio->register_base + intr_reg(txline->line)); +} + +static void thunderx_gpio_irq_mask(struct irq_data *data) +{ + struct thunderx_line *txline = irq_data_get_irq_chip_data(data); + + writeq(GPIO_INTR_ENA_W1C, + txline->txgpio->register_base + intr_reg(txline->line)); +} + +static void thunderx_gpio_irq_mask_ack(struct irq_data *data) +{ + struct thunderx_line *txline = irq_data_get_irq_chip_data(data); + + writeq(GPIO_INTR_ENA_W1C | GPIO_INTR_INTR, + txline->txgpio->register_base + intr_reg(txline->line)); +} + +static void thunderx_gpio_irq_unmask(struct irq_data *data) +{ + struct thunderx_line *txline = irq_data_get_irq_chip_data(data); + + writeq(GPIO_INTR_ENA_W1S, + txline->txgpio->register_base + intr_reg(txline->line)); +} + +static int thunderx_gpio_irq_set_type(struct irq_data *data, + unsigned int flow_type) +{ + struct thunderx_line *txline = irq_data_get_irq_chip_data(data); + struct thunderx_gpio *txgpio = txline->txgpio; + u64 bit_cfg; + + irqd_set_trigger_type(data, flow_type); + + bit_cfg = txline->fil_bits | GPIO_BIT_CFG_INT_EN; + + if (flow_type & IRQ_TYPE_EDGE_BOTH) { + irq_set_handler_locked(data, handle_fasteoi_ack_irq); + bit_cfg |= GPIO_BIT_CFG_INT_TYPE; + } else { + irq_set_handler_locked(data, handle_fasteoi_mask_irq); + } + + raw_spin_lock(&txgpio->lock); + if (flow_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)) { + bit_cfg |= GPIO_BIT_CFG_PIN_XOR; + set_bit(txline->line, txgpio->invert_mask); + } else { + clear_bit(txline->line, txgpio->invert_mask); + } + clear_bit(txline->line, txgpio->od_mask); + writeq(bit_cfg, txgpio->register_base + bit_cfg_reg(txline->line)); + raw_spin_unlock(&txgpio->lock); + + return IRQ_SET_MASK_OK; +} + +static void thunderx_gpio_irq_enable(struct irq_data *data) +{ + irq_chip_enable_parent(data); + thunderx_gpio_irq_unmask(data); +} + +static void thunderx_gpio_irq_disable(struct irq_data *data) +{ + thunderx_gpio_irq_mask(data); + irq_chip_disable_parent(data); +} + +static int thunderx_gpio_irq_request_resources(struct irq_data *data) +{ + struct thunderx_line *txline = irq_data_get_irq_chip_data(data); + struct thunderx_gpio *txgpio = txline->txgpio; + struct irq_data *parent_data = data->parent_data; + int r; + + r = gpiochip_lock_as_irq(&txgpio->chip, txline->line); + if (r) + return r; + + if (parent_data && parent_data->chip->irq_request_resources) { + r = parent_data->chip->irq_request_resources(parent_data); + if (r) + goto error; + } + + return 0; +error: + gpiochip_unlock_as_irq(&txgpio->chip, txline->line); + return r; +} + +static void thunderx_gpio_irq_release_resources(struct irq_data *data) +{ + struct thunderx_line *txline = irq_data_get_irq_chip_data(data); + struct thunderx_gpio *txgpio = txline->txgpio; + struct irq_data *parent_data = data->parent_data; + + if (parent_data && parent_data->chip->irq_release_resources) + parent_data->chip->irq_release_resources(parent_data); + + gpiochip_unlock_as_irq(&txgpio->chip, txline->line); +} + +/* + * Interrupts are chained from underlying MSI-X vectors. We have + * these irq_chip functions to be able to handle level triggering + * semantics and other acknowledgment tasks associated with the GPIO + * mechanism. + */ +static struct irq_chip thunderx_gpio_irq_chip = { + .name = "GPIO", + .irq_enable = thunderx_gpio_irq_enable, + .irq_disable = thunderx_gpio_irq_disable, + .irq_ack = thunderx_gpio_irq_ack, + .irq_mask = thunderx_gpio_irq_mask, + .irq_mask_ack = thunderx_gpio_irq_mask_ack, + .irq_unmask = thunderx_gpio_irq_unmask, + .irq_eoi = irq_chip_eoi_parent, + .irq_set_affinity = irq_chip_set_affinity_parent, + .irq_request_resources = thunderx_gpio_irq_request_resources, + .irq_release_resources = thunderx_gpio_irq_release_resources, + .irq_set_type = thunderx_gpio_irq_set_type, + + .flags = IRQCHIP_SET_TYPE_MASKED +}; + +static int thunderx_gpio_irq_translate(struct irq_domain *d, + struct irq_fwspec *fwspec, + irq_hw_number_t *hwirq, + unsigned int *type) +{ + struct thunderx_gpio *txgpio = d->host_data; + + if (WARN_ON(fwspec->param_count < 2)) + return -EINVAL; + if (fwspec->param[0] >= txgpio->chip.ngpio) + return -EINVAL; + *hwirq = fwspec->param[0]; + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; + return 0; +} + +static int thunderx_gpio_irq_alloc(struct irq_domain *d, unsigned int virq, + unsigned int nr_irqs, void *arg) +{ + struct thunderx_line *txline = arg; + + return irq_domain_set_hwirq_and_chip(d, virq, txline->line, + &thunderx_gpio_irq_chip, txline); +} + +static const struct irq_domain_ops thunderx_gpio_irqd_ops = { + .alloc = thunderx_gpio_irq_alloc, + .translate = thunderx_gpio_irq_translate +}; + +static int thunderx_gpio_to_irq(struct gpio_chip *chip, unsigned int offset) +{ + struct thunderx_gpio *txgpio = gpiochip_get_data(chip); + + return irq_find_mapping(txgpio->irqd, offset); +} + +static int thunderx_gpio_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + void __iomem * const *tbl; + struct device *dev = &pdev->dev; + struct thunderx_gpio *txgpio; + struct gpio_chip *chip; + int ngpio, i; + int err = 0; + + txgpio = devm_kzalloc(dev, sizeof(*txgpio), GFP_KERNEL); + if (!txgpio) + return -ENOMEM; + + raw_spin_lock_init(&txgpio->lock); + chip = &txgpio->chip; + + pci_set_drvdata(pdev, txgpio); + + err = pcim_enable_device(pdev); + if (err) { + dev_err(dev, "Failed to enable PCI device: err %d\n", err); + goto out; + } + + err = pcim_iomap_regions(pdev, 1 << 0, KBUILD_MODNAME); + if (err) { + dev_err(dev, "Failed to iomap PCI device: err %d\n", err); + goto out; + } + + tbl = pcim_iomap_table(pdev); + txgpio->register_base = tbl[0]; + if (!txgpio->register_base) { + dev_err(dev, "Cannot map PCI resource\n"); + err = -ENOMEM; + goto out; + } + + if (pdev->subsystem_device == 0xa10a) { + /* CN88XX has no GPIO_CONST register*/ + ngpio = 50; + txgpio->base_msi = 48; + } else { + u64 c = readq(txgpio->register_base + GPIO_CONST); + + ngpio = c & GPIO_CONST_GPIOS_MASK; + txgpio->base_msi = (c >> 8) & 0xff; + } + + txgpio->msix_entries = devm_kcalloc(dev, + ngpio, sizeof(struct msix_entry), + GFP_KERNEL); + if (!txgpio->msix_entries) { + err = -ENOMEM; + goto out; + } + + txgpio->line_entries = devm_kcalloc(dev, + ngpio, + sizeof(struct thunderx_line), + GFP_KERNEL); + if (!txgpio->line_entries) { + err = -ENOMEM; + goto out; + } + + for (i = 0; i < ngpio; i++) { + u64 bit_cfg = readq(txgpio->register_base + bit_cfg_reg(i)); + + txgpio->msix_entries[i].entry = txgpio->base_msi + (2 * i); + txgpio->line_entries[i].line = i; + txgpio->line_entries[i].txgpio = txgpio; + /* + * If something has already programmed the pin, use + * the existing glitch filter settings, otherwise go + * to 400nS. + */ + txgpio->line_entries[i].fil_bits = bit_cfg ? + (bit_cfg & GPIO_BIT_CFG_FIL_MASK) : GLITCH_FILTER_400NS; + + if ((bit_cfg & GPIO_BIT_CFG_TX_OE) && (bit_cfg & GPIO_BIT_CFG_TX_OD)) + set_bit(i, txgpio->od_mask); + if (bit_cfg & GPIO_BIT_CFG_PIN_XOR) + set_bit(i, txgpio->invert_mask); + } + + + /* Enable all MSI-X for interrupts on all possible lines. */ + err = pci_enable_msix_range(pdev, txgpio->msix_entries, ngpio, ngpio); + if (err < 0) + goto out; + + /* + * Push GPIO specific irqdomain on hierarchy created as a side + * effect of the pci_enable_msix() + */ + txgpio->irqd = irq_domain_create_hierarchy(irq_get_irq_data(txgpio->msix_entries[0].vector)->domain, + 0, 0, of_node_to_fwnode(dev->of_node), + &thunderx_gpio_irqd_ops, txgpio); + if (!txgpio->irqd) { + err = -ENOMEM; + goto out; + } + + /* Push on irq_data and the domain for each line. */ + for (i = 0; i < ngpio; i++) { + err = irq_domain_push_irq(txgpio->irqd, + txgpio->msix_entries[i].vector, + &txgpio->line_entries[i]); + if (err < 0) + dev_err(dev, "irq_domain_push_irq: %d\n", err); + } + + chip->label = KBUILD_MODNAME; + chip->parent = dev; + chip->owner = THIS_MODULE; + chip->request = thunderx_gpio_request; + chip->base = -1; /* System allocated */ + chip->can_sleep = false; + chip->ngpio = ngpio; + chip->get_direction = thunderx_gpio_get_direction; + chip->direction_input = thunderx_gpio_dir_in; + chip->get = thunderx_gpio_get; + chip->direction_output = thunderx_gpio_dir_out; + chip->set = thunderx_gpio_set; + chip->set_multiple = thunderx_gpio_set_multiple; + chip->set_config = thunderx_gpio_set_config; + chip->to_irq = thunderx_gpio_to_irq; + err = devm_gpiochip_add_data(dev, chip, txgpio); + if (err) + goto out; + + dev_info(dev, "ThunderX GPIO: %d lines with base %d.\n", + ngpio, chip->base); + return 0; +out: + pci_set_drvdata(pdev, NULL); + return err; +} + +static void thunderx_gpio_remove(struct pci_dev *pdev) +{ + int i; + struct thunderx_gpio *txgpio = pci_get_drvdata(pdev); + + for (i = 0; i < txgpio->chip.ngpio; i++) + irq_domain_pop_irq(txgpio->irqd, + txgpio->msix_entries[i].vector); + + irq_domain_remove(txgpio->irqd); + + pci_set_drvdata(pdev, NULL); +} + +static const struct pci_device_id thunderx_gpio_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xA00A) }, + { 0, } /* end of table */ +}; + +MODULE_DEVICE_TABLE(pci, thunderx_gpio_id_table); + +static struct pci_driver thunderx_gpio_driver = { + .name = KBUILD_MODNAME, + .id_table = thunderx_gpio_id_table, + .probe = thunderx_gpio_probe, + .remove = thunderx_gpio_remove, +}; + +module_pci_driver(thunderx_gpio_driver); + +MODULE_DESCRIPTION("Cavium Inc. ThunderX/OCTEON-TX GPIO Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-timberdale.c b/drivers/gpio/gpio-timberdale.c new file mode 100644 index 000000000..314e300d6 --- /dev/null +++ b/drivers/gpio/gpio-timberdale.c @@ -0,0 +1,303 @@ +/* + * Timberdale FPGA GPIO driver + * Author: Mocean Laboratories + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Timberdale FPGA GPIO + */ + +#include <linux/init.h> +#include <linux/gpio/driver.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/timb_gpio.h> +#include <linux/interrupt.h> +#include <linux/slab.h> + +#define DRIVER_NAME "timb-gpio" + +#define TGPIOVAL 0x00 +#define TGPIODIR 0x04 +#define TGPIO_IER 0x08 +#define TGPIO_ISR 0x0c +#define TGPIO_IPR 0x10 +#define TGPIO_ICR 0x14 +#define TGPIO_FLR 0x18 +#define TGPIO_LVR 0x1c +#define TGPIO_VER 0x20 +#define TGPIO_BFLR 0x24 + +struct timbgpio { + void __iomem *membase; + spinlock_t lock; /* mutual exclusion */ + struct gpio_chip gpio; + int irq_base; + unsigned long last_ier; +}; + +static int timbgpio_update_bit(struct gpio_chip *gpio, unsigned index, + unsigned offset, bool enabled) +{ + struct timbgpio *tgpio = gpiochip_get_data(gpio); + u32 reg; + + spin_lock(&tgpio->lock); + reg = ioread32(tgpio->membase + offset); + + if (enabled) + reg |= (1 << index); + else + reg &= ~(1 << index); + + iowrite32(reg, tgpio->membase + offset); + spin_unlock(&tgpio->lock); + + return 0; +} + +static int timbgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) +{ + return timbgpio_update_bit(gpio, nr, TGPIODIR, true); +} + +static int timbgpio_gpio_get(struct gpio_chip *gpio, unsigned nr) +{ + struct timbgpio *tgpio = gpiochip_get_data(gpio); + u32 value; + + value = ioread32(tgpio->membase + TGPIOVAL); + return (value & (1 << nr)) ? 1 : 0; +} + +static int timbgpio_gpio_direction_output(struct gpio_chip *gpio, + unsigned nr, int val) +{ + return timbgpio_update_bit(gpio, nr, TGPIODIR, false); +} + +static void timbgpio_gpio_set(struct gpio_chip *gpio, + unsigned nr, int val) +{ + timbgpio_update_bit(gpio, nr, TGPIOVAL, val != 0); +} + +static int timbgpio_to_irq(struct gpio_chip *gpio, unsigned offset) +{ + struct timbgpio *tgpio = gpiochip_get_data(gpio); + + if (tgpio->irq_base <= 0) + return -EINVAL; + + return tgpio->irq_base + offset; +} + +/* + * GPIO IRQ + */ +static void timbgpio_irq_disable(struct irq_data *d) +{ + struct timbgpio *tgpio = irq_data_get_irq_chip_data(d); + int offset = d->irq - tgpio->irq_base; + unsigned long flags; + + spin_lock_irqsave(&tgpio->lock, flags); + tgpio->last_ier &= ~(1UL << offset); + iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER); + spin_unlock_irqrestore(&tgpio->lock, flags); +} + +static void timbgpio_irq_enable(struct irq_data *d) +{ + struct timbgpio *tgpio = irq_data_get_irq_chip_data(d); + int offset = d->irq - tgpio->irq_base; + unsigned long flags; + + spin_lock_irqsave(&tgpio->lock, flags); + tgpio->last_ier |= 1UL << offset; + iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER); + spin_unlock_irqrestore(&tgpio->lock, flags); +} + +static int timbgpio_irq_type(struct irq_data *d, unsigned trigger) +{ + struct timbgpio *tgpio = irq_data_get_irq_chip_data(d); + int offset = d->irq - tgpio->irq_base; + unsigned long flags; + u32 lvr, flr, bflr = 0; + u32 ver; + int ret = 0; + + if (offset < 0 || offset > tgpio->gpio.ngpio) + return -EINVAL; + + ver = ioread32(tgpio->membase + TGPIO_VER); + + spin_lock_irqsave(&tgpio->lock, flags); + + lvr = ioread32(tgpio->membase + TGPIO_LVR); + flr = ioread32(tgpio->membase + TGPIO_FLR); + if (ver > 2) + bflr = ioread32(tgpio->membase + TGPIO_BFLR); + + if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { + bflr &= ~(1 << offset); + flr &= ~(1 << offset); + if (trigger & IRQ_TYPE_LEVEL_HIGH) + lvr |= 1 << offset; + else + lvr &= ~(1 << offset); + } + + if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { + if (ver < 3) { + ret = -EINVAL; + goto out; + } else { + flr |= 1 << offset; + bflr |= 1 << offset; + } + } else { + bflr &= ~(1 << offset); + flr |= 1 << offset; + if (trigger & IRQ_TYPE_EDGE_FALLING) + lvr &= ~(1 << offset); + else + lvr |= 1 << offset; + } + + iowrite32(lvr, tgpio->membase + TGPIO_LVR); + iowrite32(flr, tgpio->membase + TGPIO_FLR); + if (ver > 2) + iowrite32(bflr, tgpio->membase + TGPIO_BFLR); + + iowrite32(1 << offset, tgpio->membase + TGPIO_ICR); + +out: + spin_unlock_irqrestore(&tgpio->lock, flags); + return ret; +} + +static void timbgpio_irq(struct irq_desc *desc) +{ + struct timbgpio *tgpio = irq_desc_get_handler_data(desc); + struct irq_data *data = irq_desc_get_irq_data(desc); + unsigned long ipr; + int offset; + + data->chip->irq_ack(data); + ipr = ioread32(tgpio->membase + TGPIO_IPR); + iowrite32(ipr, tgpio->membase + TGPIO_ICR); + + /* + * Some versions of the hardware trash the IER register if more than + * one interrupt is received simultaneously. + */ + iowrite32(0, tgpio->membase + TGPIO_IER); + + for_each_set_bit(offset, &ipr, tgpio->gpio.ngpio) + generic_handle_irq(timbgpio_to_irq(&tgpio->gpio, offset)); + + iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER); +} + +static struct irq_chip timbgpio_irqchip = { + .name = "GPIO", + .irq_enable = timbgpio_irq_enable, + .irq_disable = timbgpio_irq_disable, + .irq_set_type = timbgpio_irq_type, +}; + +static int timbgpio_probe(struct platform_device *pdev) +{ + int err, i; + struct device *dev = &pdev->dev; + struct gpio_chip *gc; + struct timbgpio *tgpio; + struct resource *iomem; + struct timbgpio_platform_data *pdata = dev_get_platdata(&pdev->dev); + int irq = platform_get_irq(pdev, 0); + + if (!pdata || pdata->nr_pins > 32) { + dev_err(dev, "Invalid platform data\n"); + return -EINVAL; + } + + tgpio = devm_kzalloc(dev, sizeof(*tgpio), GFP_KERNEL); + if (!tgpio) + return -EINVAL; + + tgpio->irq_base = pdata->irq_base; + + spin_lock_init(&tgpio->lock); + + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + tgpio->membase = devm_ioremap_resource(dev, iomem); + if (IS_ERR(tgpio->membase)) + return PTR_ERR(tgpio->membase); + + gc = &tgpio->gpio; + + gc->label = dev_name(&pdev->dev); + gc->owner = THIS_MODULE; + gc->parent = &pdev->dev; + gc->direction_input = timbgpio_gpio_direction_input; + gc->get = timbgpio_gpio_get; + gc->direction_output = timbgpio_gpio_direction_output; + gc->set = timbgpio_gpio_set; + gc->to_irq = (irq >= 0 && tgpio->irq_base > 0) ? timbgpio_to_irq : NULL; + gc->dbg_show = NULL; + gc->base = pdata->gpio_base; + gc->ngpio = pdata->nr_pins; + gc->can_sleep = false; + + err = devm_gpiochip_add_data(&pdev->dev, gc, tgpio); + if (err) + return err; + + platform_set_drvdata(pdev, tgpio); + + /* make sure to disable interrupts */ + iowrite32(0x0, tgpio->membase + TGPIO_IER); + + if (irq < 0 || tgpio->irq_base <= 0) + return 0; + + for (i = 0; i < pdata->nr_pins; i++) { + irq_set_chip_and_handler(tgpio->irq_base + i, + &timbgpio_irqchip, handle_simple_irq); + irq_set_chip_data(tgpio->irq_base + i, tgpio); + irq_clear_status_flags(tgpio->irq_base + i, IRQ_NOREQUEST | IRQ_NOPROBE); + } + + irq_set_chained_handler_and_data(irq, timbgpio_irq, tgpio); + + return 0; +} + +static struct platform_driver timbgpio_platform_driver = { + .driver = { + .name = DRIVER_NAME, + .suppress_bind_attrs = true, + }, + .probe = timbgpio_probe, +}; + +/*--------------------------------------------------------------------------*/ + +builtin_platform_driver(timbgpio_platform_driver); diff --git a/drivers/gpio/gpio-tpic2810.c b/drivers/gpio/gpio-tpic2810.c new file mode 100644 index 000000000..c8b34d787 --- /dev/null +++ b/drivers/gpio/gpio-tpic2810.c @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis <afd@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + */ + +#include <linux/gpio/driver.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/mutex.h> + +#define TPIC2810_WS_COMMAND 0x44 + +/** + * struct tpic2810 - GPIO driver data + * @chip: GPIO controller chip + * @client: I2C device pointer + * @buffer: Buffer for device register + * @lock: Protects write sequences + */ +struct tpic2810 { + struct gpio_chip chip; + struct i2c_client *client; + u8 buffer; + struct mutex lock; +}; + +static void tpic2810_set(struct gpio_chip *chip, unsigned offset, int value); + +static int tpic2810_get_direction(struct gpio_chip *chip, + unsigned offset) +{ + /* This device always output */ + return 0; +} + +static int tpic2810_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + /* This device is output only */ + return -EINVAL; +} + +static int tpic2810_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + /* This device always output */ + tpic2810_set(chip, offset, value); + return 0; +} + +static void tpic2810_set_mask_bits(struct gpio_chip *chip, u8 mask, u8 bits) +{ + struct tpic2810 *gpio = gpiochip_get_data(chip); + u8 buffer; + int err; + + mutex_lock(&gpio->lock); + + buffer = gpio->buffer & ~mask; + buffer |= (mask & bits); + + err = i2c_smbus_write_byte_data(gpio->client, TPIC2810_WS_COMMAND, + buffer); + if (!err) + gpio->buffer = buffer; + + mutex_unlock(&gpio->lock); +} + +static void tpic2810_set(struct gpio_chip *chip, unsigned offset, int value) +{ + tpic2810_set_mask_bits(chip, BIT(offset), value ? BIT(offset) : 0); +} + +static void tpic2810_set_multiple(struct gpio_chip *chip, unsigned long *mask, + unsigned long *bits) +{ + tpic2810_set_mask_bits(chip, *mask, *bits); +} + +static const struct gpio_chip template_chip = { + .label = "tpic2810", + .owner = THIS_MODULE, + .get_direction = tpic2810_get_direction, + .direction_input = tpic2810_direction_input, + .direction_output = tpic2810_direction_output, + .set = tpic2810_set, + .set_multiple = tpic2810_set_multiple, + .base = -1, + .ngpio = 8, + .can_sleep = true, +}; + +static const struct of_device_id tpic2810_of_match_table[] = { + { .compatible = "ti,tpic2810" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, tpic2810_of_match_table); + +static int tpic2810_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tpic2810 *gpio; + int ret; + + gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + i2c_set_clientdata(client, gpio); + + gpio->chip = template_chip; + gpio->chip.parent = &client->dev; + + gpio->client = client; + + mutex_init(&gpio->lock); + + ret = gpiochip_add_data(&gpio->chip, gpio); + if (ret < 0) { + dev_err(&client->dev, "Unable to register gpiochip\n"); + return ret; + } + + return 0; +} + +static int tpic2810_remove(struct i2c_client *client) +{ + struct tpic2810 *gpio = i2c_get_clientdata(client); + + gpiochip_remove(&gpio->chip); + + return 0; +} + +static const struct i2c_device_id tpic2810_id_table[] = { + { "tpic2810", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, tpic2810_id_table); + +static struct i2c_driver tpic2810_driver = { + .driver = { + .name = "tpic2810", + .of_match_table = tpic2810_of_match_table, + }, + .probe = tpic2810_probe, + .remove = tpic2810_remove, + .id_table = tpic2810_id_table, +}; +module_i2c_driver(tpic2810_driver); + +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); +MODULE_DESCRIPTION("TPIC2810 8-Bit LED Driver GPIO Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-tps65086.c b/drivers/gpio/gpio-tps65086.c new file mode 100644 index 000000000..b23c4d242 --- /dev/null +++ b/drivers/gpio/gpio-tps65086.c @@ -0,0 +1,139 @@ +/* + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis <afd@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + * + * Based on the TPS65912 driver + */ + +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <linux/mfd/tps65086.h> + +struct tps65086_gpio { + struct gpio_chip chip; + struct tps65086 *tps; +}; + +static int tps65086_gpio_get_direction(struct gpio_chip *chip, + unsigned offset) +{ + /* This device is output only */ + return 0; +} + +static int tps65086_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + /* This device is output only */ + return -EINVAL; +} + +static int tps65086_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct tps65086_gpio *gpio = gpiochip_get_data(chip); + + /* Set the initial value */ + regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL, + BIT(4 + offset), value ? BIT(4 + offset) : 0); + + return 0; +} + +static int tps65086_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct tps65086_gpio *gpio = gpiochip_get_data(chip); + int ret, val; + + ret = regmap_read(gpio->tps->regmap, TPS65086_GPOCTRL, &val); + if (ret < 0) + return ret; + + return val & BIT(4 + offset); +} + +static void tps65086_gpio_set(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct tps65086_gpio *gpio = gpiochip_get_data(chip); + + regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL, + BIT(4 + offset), value ? BIT(4 + offset) : 0); +} + +static const struct gpio_chip template_chip = { + .label = "tps65086-gpio", + .owner = THIS_MODULE, + .get_direction = tps65086_gpio_get_direction, + .direction_input = tps65086_gpio_direction_input, + .direction_output = tps65086_gpio_direction_output, + .get = tps65086_gpio_get, + .set = tps65086_gpio_set, + .base = -1, + .ngpio = 4, + .can_sleep = true, +}; + +static int tps65086_gpio_probe(struct platform_device *pdev) +{ + struct tps65086_gpio *gpio; + int ret; + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + platform_set_drvdata(pdev, gpio); + + gpio->tps = dev_get_drvdata(pdev->dev.parent); + gpio->chip = template_chip; + gpio->chip.parent = gpio->tps->dev; + + ret = gpiochip_add_data(&gpio->chip, gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + return 0; +} + +static int tps65086_gpio_remove(struct platform_device *pdev) +{ + struct tps65086_gpio *gpio = platform_get_drvdata(pdev); + + gpiochip_remove(&gpio->chip); + + return 0; +} + +static const struct platform_device_id tps65086_gpio_id_table[] = { + { "tps65086-gpio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, tps65086_gpio_id_table); + +static struct platform_driver tps65086_gpio_driver = { + .driver = { + .name = "tps65086-gpio", + }, + .probe = tps65086_gpio_probe, + .remove = tps65086_gpio_remove, + .id_table = tps65086_gpio_id_table, +}; +module_platform_driver(tps65086_gpio_driver); + +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); +MODULE_DESCRIPTION("TPS65086 GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-tps65218.c b/drivers/gpio/gpio-tps65218.c new file mode 100644 index 000000000..a379bba57 --- /dev/null +++ b/drivers/gpio/gpio-tps65218.c @@ -0,0 +1,246 @@ +/* + * Copyright 2015 Verifone Int. + * + * Author: Nicolas Saenz Julienne <nicolassaenzj@gmail.com> + * + * This program is free software; you can redistribute it and/or modify i t + * under the terms of the GNU General Public License as published by th e + * Free Software Foundation; either version 2 of the License, or (at you r + * option) any later version. + * + * This driver is based on the gpio-tps65912 implementation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/gpio/driver.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/tps65218.h> + +struct tps65218_gpio { + struct tps65218 *tps65218; + struct gpio_chip gpio_chip; +}; + +static int tps65218_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc); + struct tps65218 *tps65218 = tps65218_gpio->tps65218; + unsigned int val; + int ret; + + ret = regmap_read(tps65218->regmap, TPS65218_REG_ENABLE2, &val); + if (ret) + return ret; + + return !!(val & (TPS65218_ENABLE2_GPIO1 << offset)); +} + +static void tps65218_gpio_set(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc); + struct tps65218 *tps65218 = tps65218_gpio->tps65218; + + if (value) + tps65218_set_bits(tps65218, TPS65218_REG_ENABLE2, + TPS65218_ENABLE2_GPIO1 << offset, + TPS65218_ENABLE2_GPIO1 << offset, + TPS65218_PROTECT_L1); + else + tps65218_clear_bits(tps65218, TPS65218_REG_ENABLE2, + TPS65218_ENABLE2_GPIO1 << offset, + TPS65218_PROTECT_L1); +} + +static int tps65218_gpio_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + /* Only drives GPOs */ + tps65218_gpio_set(gc, offset, value); + return 0; +} + +static int tps65218_gpio_input(struct gpio_chip *gc, unsigned offset) +{ + return -EPERM; +} + +static int tps65218_gpio_request(struct gpio_chip *gc, unsigned offset) +{ + struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc); + struct tps65218 *tps65218 = tps65218_gpio->tps65218; + int ret; + + if (gpiochip_line_is_open_source(gc, offset)) { + dev_err(gc->parent, "can't work as open source\n"); + return -EINVAL; + } + + switch (offset) { + case 0: + if (!gpiochip_line_is_open_drain(gc, offset)) { + dev_err(gc->parent, "GPO1 works only as open drain\n"); + return -EINVAL; + } + + /* Disable sequencer for GPO1 */ + ret = tps65218_clear_bits(tps65218, TPS65218_REG_SEQ7, + TPS65218_SEQ7_GPO1_SEQ_MASK, + TPS65218_PROTECT_L1); + if (ret) + return ret; + + /* Setup GPO1 */ + ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG1, + TPS65218_CONFIG1_IO1_SEL, + TPS65218_PROTECT_L1); + if (ret) + return ret; + + break; + case 1: + /* Setup GPO2 */ + ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG1, + TPS65218_CONFIG1_IO1_SEL, + TPS65218_PROTECT_L1); + if (ret) + return ret; + + break; + + case 2: + if (!gpiochip_line_is_open_drain(gc, offset)) { + dev_err(gc->parent, "GPO3 works only as open drain\n"); + return -EINVAL; + } + + /* Disable sequencer for GPO3 */ + ret = tps65218_clear_bits(tps65218, TPS65218_REG_SEQ7, + TPS65218_SEQ7_GPO3_SEQ_MASK, + TPS65218_PROTECT_L1); + if (ret) + return ret; + + /* Setup GPO3 */ + ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG2, + TPS65218_CONFIG2_DC12_RST, + TPS65218_PROTECT_L1); + if (ret) + return ret; + + break; + default: + return -EINVAL; + } + + return 0; +} + +static int tps65218_gpio_set_config(struct gpio_chip *gc, unsigned offset, + unsigned long config) +{ + struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc); + struct tps65218 *tps65218 = tps65218_gpio->tps65218; + enum pin_config_param param = pinconf_to_config_param(config); + + switch (offset) { + case 0: + case 2: + /* GPO1 is hardwired to be open drain */ + if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN) + return 0; + return -ENOTSUPP; + case 1: + /* GPO2 is push-pull by default, can be set as open drain. */ + if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN) + return tps65218_clear_bits(tps65218, + TPS65218_REG_CONFIG1, + TPS65218_CONFIG1_GPO2_BUF, + TPS65218_PROTECT_L1); + if (param == PIN_CONFIG_DRIVE_PUSH_PULL) + return tps65218_set_bits(tps65218, + TPS65218_REG_CONFIG1, + TPS65218_CONFIG1_GPO2_BUF, + TPS65218_CONFIG1_GPO2_BUF, + TPS65218_PROTECT_L1); + return -ENOTSUPP; + default: + break; + } + return -ENOTSUPP; +} + +static const struct gpio_chip template_chip = { + .label = "gpio-tps65218", + .owner = THIS_MODULE, + .request = tps65218_gpio_request, + .direction_output = tps65218_gpio_output, + .direction_input = tps65218_gpio_input, + .get = tps65218_gpio_get, + .set = tps65218_gpio_set, + .set_config = tps65218_gpio_set_config, + .can_sleep = true, + .ngpio = 3, + .base = -1, +}; + +static int tps65218_gpio_probe(struct platform_device *pdev) +{ + struct tps65218 *tps65218 = dev_get_drvdata(pdev->dev.parent); + struct tps65218_gpio *tps65218_gpio; + int ret; + + tps65218_gpio = devm_kzalloc(&pdev->dev, sizeof(*tps65218_gpio), + GFP_KERNEL); + if (!tps65218_gpio) + return -ENOMEM; + + tps65218_gpio->tps65218 = tps65218; + tps65218_gpio->gpio_chip = template_chip; + tps65218_gpio->gpio_chip.parent = &pdev->dev; +#ifdef CONFIG_OF_GPIO + tps65218_gpio->gpio_chip.of_node = pdev->dev.of_node; +#endif + + ret = devm_gpiochip_add_data(&pdev->dev, &tps65218_gpio->gpio_chip, + tps65218_gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register gpiochip, %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, tps65218_gpio); + + return ret; +} + +static const struct of_device_id tps65218_dt_match[] = { + { .compatible = "ti,tps65218-gpio" }, + { } +}; +MODULE_DEVICE_TABLE(of, tps65218_dt_match); + +static const struct platform_device_id tps65218_gpio_id_table[] = { + { "tps65218-gpio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, tps65218_gpio_id_table); + +static struct platform_driver tps65218_gpio_driver = { + .driver = { + .name = "tps65218-gpio", + .of_match_table = of_match_ptr(tps65218_dt_match) + }, + .probe = tps65218_gpio_probe, + .id_table = tps65218_gpio_id_table, +}; + +module_platform_driver(tps65218_gpio_driver); + +MODULE_AUTHOR("Nicolas Saenz Julienne <nicolassaenzj@gmail.com>"); +MODULE_DESCRIPTION("GPO interface for TPS65218 PMICs"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:tps65218-gpio"); diff --git a/drivers/gpio/gpio-tps6586x.c b/drivers/gpio/gpio-tps6586x.c new file mode 100644 index 000000000..042b9a207 --- /dev/null +++ b/drivers/gpio/gpio-tps6586x.c @@ -0,0 +1,141 @@ +/* + * TI TPS6586x GPIO driver + * + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan <ldewangan@nvidia.com> + * + * Based on tps6586x.c + * Copyright (c) 2010 CompuLab Ltd. + * Mike Rapoport <mike@compulab.co.il> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mfd/tps6586x.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> + +/* GPIO control registers */ +#define TPS6586X_GPIOSET1 0x5d +#define TPS6586X_GPIOSET2 0x5e + +struct tps6586x_gpio { + struct gpio_chip gpio_chip; + struct device *parent; +}; + +static int tps6586x_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct tps6586x_gpio *tps6586x_gpio = gpiochip_get_data(gc); + uint8_t val; + int ret; + + ret = tps6586x_read(tps6586x_gpio->parent, TPS6586X_GPIOSET2, &val); + if (ret) + return ret; + + return !!(val & (1 << offset)); +} + +static void tps6586x_gpio_set(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct tps6586x_gpio *tps6586x_gpio = gpiochip_get_data(gc); + + tps6586x_update(tps6586x_gpio->parent, TPS6586X_GPIOSET2, + value << offset, 1 << offset); +} + +static int tps6586x_gpio_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct tps6586x_gpio *tps6586x_gpio = gpiochip_get_data(gc); + uint8_t val, mask; + + tps6586x_gpio_set(gc, offset, value); + + val = 0x1 << (offset * 2); + mask = 0x3 << (offset * 2); + + return tps6586x_update(tps6586x_gpio->parent, TPS6586X_GPIOSET1, + val, mask); +} + +static int tps6586x_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct tps6586x_gpio *tps6586x_gpio = gpiochip_get_data(gc); + + return tps6586x_irq_get_virq(tps6586x_gpio->parent, + TPS6586X_INT_PLDO_0 + offset); +} + +static int tps6586x_gpio_probe(struct platform_device *pdev) +{ + struct tps6586x_platform_data *pdata; + struct tps6586x_gpio *tps6586x_gpio; + int ret; + + pdata = dev_get_platdata(pdev->dev.parent); + tps6586x_gpio = devm_kzalloc(&pdev->dev, + sizeof(*tps6586x_gpio), GFP_KERNEL); + if (!tps6586x_gpio) + return -ENOMEM; + + tps6586x_gpio->parent = pdev->dev.parent; + + tps6586x_gpio->gpio_chip.owner = THIS_MODULE; + tps6586x_gpio->gpio_chip.label = pdev->name; + tps6586x_gpio->gpio_chip.parent = &pdev->dev; + tps6586x_gpio->gpio_chip.ngpio = 4; + tps6586x_gpio->gpio_chip.can_sleep = true; + + /* FIXME: add handling of GPIOs as dedicated inputs */ + tps6586x_gpio->gpio_chip.direction_output = tps6586x_gpio_output; + tps6586x_gpio->gpio_chip.set = tps6586x_gpio_set; + tps6586x_gpio->gpio_chip.get = tps6586x_gpio_get; + tps6586x_gpio->gpio_chip.to_irq = tps6586x_gpio_to_irq; + +#ifdef CONFIG_OF_GPIO + tps6586x_gpio->gpio_chip.of_node = pdev->dev.parent->of_node; +#endif + if (pdata && pdata->gpio_base) + tps6586x_gpio->gpio_chip.base = pdata->gpio_base; + else + tps6586x_gpio->gpio_chip.base = -1; + + ret = devm_gpiochip_add_data(&pdev->dev, &tps6586x_gpio->gpio_chip, + tps6586x_gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, tps6586x_gpio); + + return ret; +} + +static struct platform_driver tps6586x_gpio_driver = { + .driver.name = "tps6586x-gpio", + .probe = tps6586x_gpio_probe, +}; + +static int __init tps6586x_gpio_init(void) +{ + return platform_driver_register(&tps6586x_gpio_driver); +} +subsys_initcall(tps6586x_gpio_init); diff --git a/drivers/gpio/gpio-tps65910.c b/drivers/gpio/gpio-tps65910.c new file mode 100644 index 000000000..e63d7dabf --- /dev/null +++ b/drivers/gpio/gpio-tps65910.c @@ -0,0 +1,194 @@ +/* + * TI TPS6591x GPIO driver + * + * Copyright 2010 Texas Instruments Inc. + * + * Author: Graeme Gregory <gg@slimlogic.co.uk> + * Author: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/mfd/tps65910.h> +#include <linux/of_device.h> + +struct tps65910_gpio { + struct gpio_chip gpio_chip; + struct tps65910 *tps65910; +}; + +static int tps65910_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct tps65910_gpio *tps65910_gpio = gpiochip_get_data(gc); + struct tps65910 *tps65910 = tps65910_gpio->tps65910; + unsigned int val; + + tps65910_reg_read(tps65910, TPS65910_GPIO0 + offset, &val); + + if (val & GPIO_STS_MASK) + return 1; + + return 0; +} + +static void tps65910_gpio_set(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct tps65910_gpio *tps65910_gpio = gpiochip_get_data(gc); + struct tps65910 *tps65910 = tps65910_gpio->tps65910; + + if (value) + tps65910_reg_set_bits(tps65910, TPS65910_GPIO0 + offset, + GPIO_SET_MASK); + else + tps65910_reg_clear_bits(tps65910, TPS65910_GPIO0 + offset, + GPIO_SET_MASK); +} + +static int tps65910_gpio_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct tps65910_gpio *tps65910_gpio = gpiochip_get_data(gc); + struct tps65910 *tps65910 = tps65910_gpio->tps65910; + + /* Set the initial value */ + tps65910_gpio_set(gc, offset, value); + + return tps65910_reg_set_bits(tps65910, TPS65910_GPIO0 + offset, + GPIO_CFG_MASK); +} + +static int tps65910_gpio_input(struct gpio_chip *gc, unsigned offset) +{ + struct tps65910_gpio *tps65910_gpio = gpiochip_get_data(gc); + struct tps65910 *tps65910 = tps65910_gpio->tps65910; + + return tps65910_reg_clear_bits(tps65910, TPS65910_GPIO0 + offset, + GPIO_CFG_MASK); +} + +#ifdef CONFIG_OF +static struct tps65910_board *tps65910_parse_dt_for_gpio(struct device *dev, + struct tps65910 *tps65910, int chip_ngpio) +{ + struct tps65910_board *tps65910_board = tps65910->of_plat_data; + unsigned int prop_array[TPS6591X_MAX_NUM_GPIO]; + int ngpio = min(chip_ngpio, TPS6591X_MAX_NUM_GPIO); + int ret; + int idx; + + tps65910_board->gpio_base = -1; + ret = of_property_read_u32_array(tps65910->dev->of_node, + "ti,en-gpio-sleep", prop_array, ngpio); + if (ret < 0) { + dev_dbg(dev, "ti,en-gpio-sleep not specified\n"); + return tps65910_board; + } + + for (idx = 0; idx < ngpio; idx++) + tps65910_board->en_gpio_sleep[idx] = (prop_array[idx] != 0); + + return tps65910_board; +} +#else +static struct tps65910_board *tps65910_parse_dt_for_gpio(struct device *dev, + struct tps65910 *tps65910, int chip_ngpio) +{ + return NULL; +} +#endif + +static int tps65910_gpio_probe(struct platform_device *pdev) +{ + struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent); + struct tps65910_board *pdata = dev_get_platdata(tps65910->dev); + struct tps65910_gpio *tps65910_gpio; + int ret; + int i; + + tps65910_gpio = devm_kzalloc(&pdev->dev, + sizeof(*tps65910_gpio), GFP_KERNEL); + if (!tps65910_gpio) + return -ENOMEM; + + tps65910_gpio->tps65910 = tps65910; + + tps65910_gpio->gpio_chip.owner = THIS_MODULE; + tps65910_gpio->gpio_chip.label = tps65910->i2c_client->name; + + switch (tps65910_chip_id(tps65910)) { + case TPS65910: + tps65910_gpio->gpio_chip.ngpio = TPS65910_NUM_GPIO; + break; + case TPS65911: + tps65910_gpio->gpio_chip.ngpio = TPS65911_NUM_GPIO; + break; + default: + return -EINVAL; + } + tps65910_gpio->gpio_chip.can_sleep = true; + tps65910_gpio->gpio_chip.direction_input = tps65910_gpio_input; + tps65910_gpio->gpio_chip.direction_output = tps65910_gpio_output; + tps65910_gpio->gpio_chip.set = tps65910_gpio_set; + tps65910_gpio->gpio_chip.get = tps65910_gpio_get; + tps65910_gpio->gpio_chip.parent = &pdev->dev; +#ifdef CONFIG_OF_GPIO + tps65910_gpio->gpio_chip.of_node = tps65910->dev->of_node; +#endif + if (pdata && pdata->gpio_base) + tps65910_gpio->gpio_chip.base = pdata->gpio_base; + else + tps65910_gpio->gpio_chip.base = -1; + + if (!pdata && tps65910->dev->of_node) + pdata = tps65910_parse_dt_for_gpio(&pdev->dev, tps65910, + tps65910_gpio->gpio_chip.ngpio); + + if (!pdata) + goto skip_init; + + /* Configure sleep control for gpios if provided */ + for (i = 0; i < tps65910_gpio->gpio_chip.ngpio; ++i) { + if (!pdata->en_gpio_sleep[i]) + continue; + + ret = tps65910_reg_set_bits(tps65910, + TPS65910_GPIO0 + i, GPIO_SLEEP_MASK); + if (ret < 0) + dev_warn(tps65910->dev, + "GPIO Sleep setting failed with err %d\n", ret); + } + +skip_init: + ret = devm_gpiochip_add_data(&pdev->dev, &tps65910_gpio->gpio_chip, + tps65910_gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, tps65910_gpio); + + return ret; +} + +static struct platform_driver tps65910_gpio_driver = { + .driver.name = "tps65910-gpio", + .probe = tps65910_gpio_probe, +}; + +static int __init tps65910_gpio_init(void) +{ + return platform_driver_register(&tps65910_gpio_driver); +} +subsys_initcall(tps65910_gpio_init); diff --git a/drivers/gpio/gpio-tps65912.c b/drivers/gpio/gpio-tps65912.c new file mode 100644 index 000000000..abc0798ef --- /dev/null +++ b/drivers/gpio/gpio-tps65912.c @@ -0,0 +1,149 @@ +/* + * GPIO driver for TI TPS65912x PMICs + * + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis <afd@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + * + * Based on the Arizona GPIO driver and the previous TPS65912 driver by + * Margarita Olaya Cabrera <magi@slimlogic.co.uk> + */ + +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <linux/mfd/tps65912.h> + +struct tps65912_gpio { + struct gpio_chip gpio_chip; + struct tps65912 *tps; +}; + +static int tps65912_gpio_get_direction(struct gpio_chip *gc, + unsigned offset) +{ + struct tps65912_gpio *gpio = gpiochip_get_data(gc); + + int ret, val; + + ret = regmap_read(gpio->tps->regmap, TPS65912_GPIO1 + offset, &val); + if (ret) + return ret; + + if (val & GPIO_CFG_MASK) + return GPIOF_DIR_OUT; + else + return GPIOF_DIR_IN; +} + +static int tps65912_gpio_direction_input(struct gpio_chip *gc, unsigned offset) +{ + struct tps65912_gpio *gpio = gpiochip_get_data(gc); + + return regmap_update_bits(gpio->tps->regmap, TPS65912_GPIO1 + offset, + GPIO_CFG_MASK, 0); +} + +static int tps65912_gpio_direction_output(struct gpio_chip *gc, + unsigned offset, int value) +{ + struct tps65912_gpio *gpio = gpiochip_get_data(gc); + + /* Set the initial value */ + regmap_update_bits(gpio->tps->regmap, TPS65912_GPIO1 + offset, + GPIO_SET_MASK, value ? GPIO_SET_MASK : 0); + + return regmap_update_bits(gpio->tps->regmap, TPS65912_GPIO1 + offset, + GPIO_CFG_MASK, GPIO_CFG_MASK); +} + +static int tps65912_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct tps65912_gpio *gpio = gpiochip_get_data(gc); + int ret, val; + + ret = regmap_read(gpio->tps->regmap, TPS65912_GPIO1 + offset, &val); + if (ret) + return ret; + + if (val & GPIO_STS_MASK) + return 1; + + return 0; +} + +static void tps65912_gpio_set(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct tps65912_gpio *gpio = gpiochip_get_data(gc); + + regmap_update_bits(gpio->tps->regmap, TPS65912_GPIO1 + offset, + GPIO_SET_MASK, value ? GPIO_SET_MASK : 0); +} + +static const struct gpio_chip template_chip = { + .label = "tps65912-gpio", + .owner = THIS_MODULE, + .get_direction = tps65912_gpio_get_direction, + .direction_input = tps65912_gpio_direction_input, + .direction_output = tps65912_gpio_direction_output, + .get = tps65912_gpio_get, + .set = tps65912_gpio_set, + .base = -1, + .ngpio = 5, + .can_sleep = true, +}; + +static int tps65912_gpio_probe(struct platform_device *pdev) +{ + struct tps65912 *tps = dev_get_drvdata(pdev->dev.parent); + struct tps65912_gpio *gpio; + int ret; + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + gpio->tps = dev_get_drvdata(pdev->dev.parent); + gpio->gpio_chip = template_chip; + gpio->gpio_chip.parent = tps->dev; + + ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gpio_chip, + gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, gpio); + + return 0; +} + +static const struct platform_device_id tps65912_gpio_id_table[] = { + { "tps65912-gpio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, tps65912_gpio_id_table); + +static struct platform_driver tps65912_gpio_driver = { + .driver = { + .name = "tps65912-gpio", + }, + .probe = tps65912_gpio_probe, + .id_table = tps65912_gpio_id_table, +}; +module_platform_driver(tps65912_gpio_driver); + +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); +MODULE_DESCRIPTION("TPS65912 GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-tps68470.c b/drivers/gpio/gpio-tps68470.c new file mode 100644 index 000000000..aff6e504c --- /dev/null +++ b/drivers/gpio/gpio-tps68470.c @@ -0,0 +1,168 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * GPIO driver for TPS68470 PMIC + * + * Copyright (C) 2017 Intel Corporation + * + * Authors: + * Antti Laakso <antti.laakso@intel.com> + * Tianshu Qiu <tian.shu.qiu@intel.com> + * Jian Xu Zheng <jian.xu.zheng@intel.com> + * Yuning Pu <yuning.pu@intel.com> + */ + +#include <linux/gpio/driver.h> +#include <linux/mfd/tps68470.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define TPS68470_N_LOGIC_OUTPUT 3 +#define TPS68470_N_REGULAR_GPIO 7 +#define TPS68470_N_GPIO (TPS68470_N_LOGIC_OUTPUT + TPS68470_N_REGULAR_GPIO) + +struct tps68470_gpio_data { + struct regmap *tps68470_regmap; + struct gpio_chip gc; +}; + +static int tps68470_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct tps68470_gpio_data *tps68470_gpio = gpiochip_get_data(gc); + struct regmap *regmap = tps68470_gpio->tps68470_regmap; + unsigned int reg = TPS68470_REG_GPDO; + int val, ret; + + if (offset >= TPS68470_N_REGULAR_GPIO) { + offset -= TPS68470_N_REGULAR_GPIO; + reg = TPS68470_REG_SGPO; + } + + ret = regmap_read(regmap, reg, &val); + if (ret) { + dev_err(tps68470_gpio->gc.parent, "reg 0x%x read failed\n", + TPS68470_REG_SGPO); + return ret; + } + return !!(val & BIT(offset)); +} + +/* Return 0 if output, 1 if input */ +static int tps68470_gpio_get_direction(struct gpio_chip *gc, + unsigned int offset) +{ + struct tps68470_gpio_data *tps68470_gpio = gpiochip_get_data(gc); + struct regmap *regmap = tps68470_gpio->tps68470_regmap; + int val, ret; + + /* rest are always outputs */ + if (offset >= TPS68470_N_REGULAR_GPIO) + return 0; + + ret = regmap_read(regmap, TPS68470_GPIO_CTL_REG_A(offset), &val); + if (ret) { + dev_err(tps68470_gpio->gc.parent, "reg 0x%x read failed\n", + TPS68470_GPIO_CTL_REG_A(offset)); + return ret; + } + + val &= TPS68470_GPIO_MODE_MASK; + return val >= TPS68470_GPIO_MODE_OUT_CMOS ? 0 : 1; +} + +static void tps68470_gpio_set(struct gpio_chip *gc, unsigned int offset, + int value) +{ + struct tps68470_gpio_data *tps68470_gpio = gpiochip_get_data(gc); + struct regmap *regmap = tps68470_gpio->tps68470_regmap; + unsigned int reg = TPS68470_REG_GPDO; + + if (offset >= TPS68470_N_REGULAR_GPIO) { + reg = TPS68470_REG_SGPO; + offset -= TPS68470_N_REGULAR_GPIO; + } + + regmap_update_bits(regmap, reg, BIT(offset), value ? BIT(offset) : 0); +} + +static int tps68470_gpio_output(struct gpio_chip *gc, unsigned int offset, + int value) +{ + struct tps68470_gpio_data *tps68470_gpio = gpiochip_get_data(gc); + struct regmap *regmap = tps68470_gpio->tps68470_regmap; + + /* rest are always outputs */ + if (offset >= TPS68470_N_REGULAR_GPIO) + return 0; + + /* Set the initial value */ + tps68470_gpio_set(gc, offset, value); + + return regmap_update_bits(regmap, TPS68470_GPIO_CTL_REG_A(offset), + TPS68470_GPIO_MODE_MASK, + TPS68470_GPIO_MODE_OUT_CMOS); +} + +static int tps68470_gpio_input(struct gpio_chip *gc, unsigned int offset) +{ + struct tps68470_gpio_data *tps68470_gpio = gpiochip_get_data(gc); + struct regmap *regmap = tps68470_gpio->tps68470_regmap; + + /* rest are always outputs */ + if (offset >= TPS68470_N_REGULAR_GPIO) + return -EINVAL; + + return regmap_update_bits(regmap, TPS68470_GPIO_CTL_REG_A(offset), + TPS68470_GPIO_MODE_MASK, 0x00); +} + +static const char *tps68470_names[TPS68470_N_GPIO] = { + "gpio.0", "gpio.1", "gpio.2", "gpio.3", + "gpio.4", "gpio.5", "gpio.6", + "s_enable", "s_idle", "s_resetn", +}; + +static int tps68470_gpio_probe(struct platform_device *pdev) +{ + struct tps68470_gpio_data *tps68470_gpio; + int ret; + + tps68470_gpio = devm_kzalloc(&pdev->dev, sizeof(*tps68470_gpio), + GFP_KERNEL); + if (!tps68470_gpio) + return -ENOMEM; + + tps68470_gpio->tps68470_regmap = dev_get_drvdata(pdev->dev.parent); + tps68470_gpio->gc.label = "tps68470-gpio"; + tps68470_gpio->gc.owner = THIS_MODULE; + tps68470_gpio->gc.direction_input = tps68470_gpio_input; + tps68470_gpio->gc.direction_output = tps68470_gpio_output; + tps68470_gpio->gc.get = tps68470_gpio_get; + tps68470_gpio->gc.get_direction = tps68470_gpio_get_direction; + tps68470_gpio->gc.set = tps68470_gpio_set; + tps68470_gpio->gc.can_sleep = true; + tps68470_gpio->gc.names = tps68470_names; + tps68470_gpio->gc.ngpio = TPS68470_N_GPIO; + tps68470_gpio->gc.base = -1; + tps68470_gpio->gc.parent = &pdev->dev; + + ret = devm_gpiochip_add_data(&pdev->dev, &tps68470_gpio->gc, + tps68470_gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register gpio_chip: %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, tps68470_gpio); + + return ret; +} + +static struct platform_driver tps68470_gpio_driver = { + .driver = { + .name = "tps68470-gpio", + }, + .probe = tps68470_gpio_probe, +}; + +builtin_platform_driver(tps68470_gpio_driver) diff --git a/drivers/gpio/gpio-ts4800.c b/drivers/gpio/gpio-ts4800.c new file mode 100644 index 000000000..c2a80b4cb --- /dev/null +++ b/drivers/gpio/gpio-ts4800.c @@ -0,0 +1,83 @@ +/* + * GPIO driver for the TS-4800 board + * + * Copyright (c) 2016 - Savoir-faire Linux + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> + +#define DEFAULT_PIN_NUMBER 16 +#define INPUT_REG_OFFSET 0x00 +#define OUTPUT_REG_OFFSET 0x02 +#define DIRECTION_REG_OFFSET 0x04 + +static int ts4800_gpio_probe(struct platform_device *pdev) +{ + struct device_node *node; + struct gpio_chip *chip; + struct resource *res; + void __iomem *base_addr; + int retval; + u32 ngpios; + + chip = devm_kzalloc(&pdev->dev, sizeof(struct gpio_chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base_addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base_addr)) + return PTR_ERR(base_addr); + + node = pdev->dev.of_node; + if (!node) + return -EINVAL; + + retval = of_property_read_u32(node, "ngpios", &ngpios); + if (retval == -EINVAL) + ngpios = DEFAULT_PIN_NUMBER; + else if (retval) + return retval; + + retval = bgpio_init(chip, &pdev->dev, 2, base_addr + INPUT_REG_OFFSET, + base_addr + OUTPUT_REG_OFFSET, NULL, + base_addr + DIRECTION_REG_OFFSET, NULL, 0); + if (retval) { + dev_err(&pdev->dev, "bgpio_init failed\n"); + return retval; + } + + chip->ngpio = ngpios; + + platform_set_drvdata(pdev, chip); + + return devm_gpiochip_add_data(&pdev->dev, chip, NULL); +} + +static const struct of_device_id ts4800_gpio_of_match[] = { + { .compatible = "technologic,ts4800-gpio", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ts4800_gpio_of_match); + +static struct platform_driver ts4800_gpio_driver = { + .driver = { + .name = "ts4800-gpio", + .of_match_table = ts4800_gpio_of_match, + }, + .probe = ts4800_gpio_probe, +}; + +module_platform_driver_probe(ts4800_gpio_driver, ts4800_gpio_probe); + +MODULE_AUTHOR("Julien Grossholtz <julien.grossholtz@savoirfairelinux.com>"); +MODULE_DESCRIPTION("TS4800 FPGA GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-ts4900.c b/drivers/gpio/gpio-ts4900.c new file mode 100644 index 000000000..410452306 --- /dev/null +++ b/drivers/gpio/gpio-ts4900.c @@ -0,0 +1,199 @@ +/* + * Digital I/O driver for Technologic Systems I2C FPGA Core + * + * Copyright (C) 2015, 2018 Technologic Systems + * Copyright (C) 2016 Savoir-Faire Linux + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + */ + +#include <linux/gpio/driver.h> +#include <linux/i2c.h> +#include <linux/of_device.h> +#include <linux/module.h> +#include <linux/regmap.h> + +#define DEFAULT_PIN_NUMBER 32 +/* + * Register bits used by the GPIO device + * Some boards, such as TS-7970 do not have a separate input bit + */ +#define TS4900_GPIO_OE 0x01 +#define TS4900_GPIO_OUT 0x02 +#define TS4900_GPIO_IN 0x04 +#define TS7970_GPIO_IN 0x02 + +struct ts4900_gpio_priv { + struct regmap *regmap; + struct gpio_chip gpio_chip; + unsigned int input_bit; +}; + +static int ts4900_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct ts4900_gpio_priv *priv = gpiochip_get_data(chip); + unsigned int reg; + + regmap_read(priv->regmap, offset, ®); + + return !(reg & TS4900_GPIO_OE); +} + +static int ts4900_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct ts4900_gpio_priv *priv = gpiochip_get_data(chip); + + /* Only clear the OE bit here, requires a RMW. Prevents potential issue + * with OE and data getting to the physical pin at different times. + */ + return regmap_update_bits(priv->regmap, offset, TS4900_GPIO_OE, 0); +} + +static int ts4900_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct ts4900_gpio_priv *priv = gpiochip_get_data(chip); + unsigned int reg; + int ret; + + /* If changing from an input to an output, we need to first set the + * proper data bit to what is requested and then set OE bit. This + * prevents a glitch that can occur on the IO line + */ + regmap_read(priv->regmap, offset, ®); + if (!(reg & TS4900_GPIO_OE)) { + if (value) + reg = TS4900_GPIO_OUT; + else + reg &= ~TS4900_GPIO_OUT; + + regmap_write(priv->regmap, offset, reg); + } + + if (value) + ret = regmap_write(priv->regmap, offset, TS4900_GPIO_OE | + TS4900_GPIO_OUT); + else + ret = regmap_write(priv->regmap, offset, TS4900_GPIO_OE); + + return ret; +} + +static int ts4900_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct ts4900_gpio_priv *priv = gpiochip_get_data(chip); + unsigned int reg; + + regmap_read(priv->regmap, offset, ®); + + return !!(reg & priv->input_bit); +} + +static void ts4900_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct ts4900_gpio_priv *priv = gpiochip_get_data(chip); + + if (value) + regmap_update_bits(priv->regmap, offset, TS4900_GPIO_OUT, + TS4900_GPIO_OUT); + else + regmap_update_bits(priv->regmap, offset, TS4900_GPIO_OUT, 0); +} + +static const struct regmap_config ts4900_regmap_config = { + .reg_bits = 16, + .val_bits = 8, +}; + +static const struct gpio_chip template_chip = { + .label = "ts4900-gpio", + .owner = THIS_MODULE, + .get_direction = ts4900_gpio_get_direction, + .direction_input = ts4900_gpio_direction_input, + .direction_output = ts4900_gpio_direction_output, + .get = ts4900_gpio_get, + .set = ts4900_gpio_set, + .base = -1, + .can_sleep = true, +}; + +static const struct of_device_id ts4900_gpio_of_match_table[] = { + { + .compatible = "technologic,ts4900-gpio", + .data = (void *)TS4900_GPIO_IN, + }, { + .compatible = "technologic,ts7970-gpio", + .data = (void *)TS7970_GPIO_IN, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, ts4900_gpio_of_match_table); + +static int ts4900_gpio_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ts4900_gpio_priv *priv; + u32 ngpio; + int ret; + + if (of_property_read_u32(client->dev.of_node, "ngpios", &ngpio)) + ngpio = DEFAULT_PIN_NUMBER; + + priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->gpio_chip = template_chip; + priv->gpio_chip.label = "ts4900-gpio"; + priv->gpio_chip.ngpio = ngpio; + priv->gpio_chip.parent = &client->dev; + priv->input_bit = (uintptr_t)of_device_get_match_data(&client->dev); + + priv->regmap = devm_regmap_init_i2c(client, &ts4900_regmap_config); + if (IS_ERR(priv->regmap)) { + ret = PTR_ERR(priv->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + ret = devm_gpiochip_add_data(&client->dev, &priv->gpio_chip, priv); + if (ret < 0) { + dev_err(&client->dev, "Unable to register gpiochip\n"); + return ret; + } + + i2c_set_clientdata(client, priv); + + return 0; +} + +static const struct i2c_device_id ts4900_gpio_id_table[] = { + { "ts4900-gpio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, ts4900_gpio_id_table); + +static struct i2c_driver ts4900_gpio_driver = { + .driver = { + .name = "ts4900-gpio", + .of_match_table = ts4900_gpio_of_match_table, + }, + .probe = ts4900_gpio_probe, + .id_table = ts4900_gpio_id_table, +}; +module_i2c_driver(ts4900_gpio_driver); + +MODULE_AUTHOR("Technologic Systems"); +MODULE_DESCRIPTION("GPIO interface for Technologic Systems I2C-FPGA core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-ts5500.c b/drivers/gpio/gpio-ts5500.c new file mode 100644 index 000000000..6cfeba07f --- /dev/null +++ b/drivers/gpio/gpio-ts5500.c @@ -0,0 +1,458 @@ +/* + * Digital I/O driver for Technologic Systems TS-5500 + * + * Copyright (c) 2012 Savoir-faire Linux Inc. + * Vivien Didelot <vivien.didelot@savoirfairelinux.com> + * + * Technologic Systems platforms have pin blocks, exposing several Digital + * Input/Output lines (DIO). This driver aims to support single pin blocks. + * In that sense, the support is not limited to the TS-5500 blocks. + * Actually, the following platforms have DIO support: + * + * TS-5500: + * Documentation: http://wiki.embeddedarm.com/wiki/TS-5500 + * Blocks: DIO1, DIO2 and LCD port. + * + * TS-5600: + * Documentation: http://wiki.embeddedarm.com/wiki/TS-5600 + * Blocks: LCD port (identical to TS-5500 LCD). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bitops.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_data/gpio-ts5500.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +/* List of supported Technologic Systems platforms DIO blocks */ +enum ts5500_blocks { TS5500_DIO1, TS5500_DIO2, TS5500_LCD, TS5600_LCD }; + +struct ts5500_priv { + const struct ts5500_dio *pinout; + struct gpio_chip gpio_chip; + spinlock_t lock; + bool strap; + u8 hwirq; +}; + +/* + * Hex 7D is used to control several blocks (e.g. DIO2 and LCD port). + * This flag ensures that the region has been requested by this driver. + */ +static bool hex7d_reserved; + +/* + * This structure is used to describe capabilities of DIO lines, + * such as available directions and connected interrupt (if any). + */ +struct ts5500_dio { + const u8 value_addr; + const u8 value_mask; + const u8 control_addr; + const u8 control_mask; + const bool no_input; + const bool no_output; + const u8 irq; +}; + +#define TS5500_DIO_IN_OUT(vaddr, vbit, caddr, cbit) \ + { \ + .value_addr = vaddr, \ + .value_mask = BIT(vbit), \ + .control_addr = caddr, \ + .control_mask = BIT(cbit), \ + } + +#define TS5500_DIO_IN(addr, bit) \ + { \ + .value_addr = addr, \ + .value_mask = BIT(bit), \ + .no_output = true, \ + } + +#define TS5500_DIO_IN_IRQ(addr, bit, _irq) \ + { \ + .value_addr = addr, \ + .value_mask = BIT(bit), \ + .no_output = true, \ + .irq = _irq, \ + } + +#define TS5500_DIO_OUT(addr, bit) \ + { \ + .value_addr = addr, \ + .value_mask = BIT(bit), \ + .no_input = true, \ + } + +/* + * Input/Output DIO lines are programmed in groups of 4. Their values are + * available through 4 consecutive bits in a value port, whereas the direction + * of these 4 lines is driven by only 1 bit in a control port. + */ +#define TS5500_DIO_GROUP(vaddr, vbitfrom, caddr, cbit) \ + TS5500_DIO_IN_OUT(vaddr, vbitfrom + 0, caddr, cbit), \ + TS5500_DIO_IN_OUT(vaddr, vbitfrom + 1, caddr, cbit), \ + TS5500_DIO_IN_OUT(vaddr, vbitfrom + 2, caddr, cbit), \ + TS5500_DIO_IN_OUT(vaddr, vbitfrom + 3, caddr, cbit) + +/* + * TS-5500 DIO1 block + * + * value control dir hw + * addr bit addr bit in out irq name pin offset + * + * 0x7b 0 0x7a 0 x x DIO1_0 1 0 + * 0x7b 1 0x7a 0 x x DIO1_1 3 1 + * 0x7b 2 0x7a 0 x x DIO1_2 5 2 + * 0x7b 3 0x7a 0 x x DIO1_3 7 3 + * 0x7b 4 0x7a 1 x x DIO1_4 9 4 + * 0x7b 5 0x7a 1 x x DIO1_5 11 5 + * 0x7b 6 0x7a 1 x x DIO1_6 13 6 + * 0x7b 7 0x7a 1 x x DIO1_7 15 7 + * 0x7c 0 0x7a 5 x x DIO1_8 4 8 + * 0x7c 1 0x7a 5 x x DIO1_9 6 9 + * 0x7c 2 0x7a 5 x x DIO1_10 8 10 + * 0x7c 3 0x7a 5 x x DIO1_11 10 11 + * 0x7c 4 x DIO1_12 12 12 + * 0x7c 5 x 7 DIO1_13 14 13 + */ +static const struct ts5500_dio ts5500_dio1[] = { + TS5500_DIO_GROUP(0x7b, 0, 0x7a, 0), + TS5500_DIO_GROUP(0x7b, 4, 0x7a, 1), + TS5500_DIO_GROUP(0x7c, 0, 0x7a, 5), + TS5500_DIO_IN(0x7c, 4), + TS5500_DIO_IN_IRQ(0x7c, 5, 7), +}; + +/* + * TS-5500 DIO2 block + * + * value control dir hw + * addr bit addr bit in out irq name pin offset + * + * 0x7e 0 0x7d 0 x x DIO2_0 1 0 + * 0x7e 1 0x7d 0 x x DIO2_1 3 1 + * 0x7e 2 0x7d 0 x x DIO2_2 5 2 + * 0x7e 3 0x7d 0 x x DIO2_3 7 3 + * 0x7e 4 0x7d 1 x x DIO2_4 9 4 + * 0x7e 5 0x7d 1 x x DIO2_5 11 5 + * 0x7e 6 0x7d 1 x x DIO2_6 13 6 + * 0x7e 7 0x7d 1 x x DIO2_7 15 7 + * 0x7f 0 0x7d 5 x x DIO2_8 4 8 + * 0x7f 1 0x7d 5 x x DIO2_9 6 9 + * 0x7f 2 0x7d 5 x x DIO2_10 8 10 + * 0x7f 3 0x7d 5 x x DIO2_11 10 11 + * 0x7f 4 x 6 DIO2_13 14 12 + */ +static const struct ts5500_dio ts5500_dio2[] = { + TS5500_DIO_GROUP(0x7e, 0, 0x7d, 0), + TS5500_DIO_GROUP(0x7e, 4, 0x7d, 1), + TS5500_DIO_GROUP(0x7f, 0, 0x7d, 5), + TS5500_DIO_IN_IRQ(0x7f, 4, 6), +}; + +/* + * TS-5500 LCD port used as DIO block + * TS-5600 LCD port is identical + * + * value control dir hw + * addr bit addr bit in out irq name pin offset + * + * 0x72 0 0x7d 2 x x LCD_0 8 0 + * 0x72 1 0x7d 2 x x LCD_1 7 1 + * 0x72 2 0x7d 2 x x LCD_2 10 2 + * 0x72 3 0x7d 2 x x LCD_3 9 3 + * 0x72 4 0x7d 3 x x LCD_4 12 4 + * 0x72 5 0x7d 3 x x LCD_5 11 5 + * 0x72 6 0x7d 3 x x LCD_6 14 6 + * 0x72 7 0x7d 3 x x LCD_7 13 7 + * 0x73 0 x LCD_EN 5 8 + * 0x73 6 x LCD_WR 6 9 + * 0x73 7 x 1 LCD_RS 3 10 + */ +static const struct ts5500_dio ts5500_lcd[] = { + TS5500_DIO_GROUP(0x72, 0, 0x7d, 2), + TS5500_DIO_GROUP(0x72, 4, 0x7d, 3), + TS5500_DIO_OUT(0x73, 0), + TS5500_DIO_IN(0x73, 6), + TS5500_DIO_IN_IRQ(0x73, 7, 1), +}; + +static inline void ts5500_set_mask(u8 mask, u8 addr) +{ + u8 val = inb(addr); + val |= mask; + outb(val, addr); +} + +static inline void ts5500_clear_mask(u8 mask, u8 addr) +{ + u8 val = inb(addr); + val &= ~mask; + outb(val, addr); +} + +static int ts5500_gpio_input(struct gpio_chip *chip, unsigned offset) +{ + struct ts5500_priv *priv = gpiochip_get_data(chip); + const struct ts5500_dio line = priv->pinout[offset]; + unsigned long flags; + + if (line.no_input) + return -ENXIO; + + if (line.no_output) + return 0; + + spin_lock_irqsave(&priv->lock, flags); + ts5500_clear_mask(line.control_mask, line.control_addr); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int ts5500_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct ts5500_priv *priv = gpiochip_get_data(chip); + const struct ts5500_dio line = priv->pinout[offset]; + + return !!(inb(line.value_addr) & line.value_mask); +} + +static int ts5500_gpio_output(struct gpio_chip *chip, unsigned offset, int val) +{ + struct ts5500_priv *priv = gpiochip_get_data(chip); + const struct ts5500_dio line = priv->pinout[offset]; + unsigned long flags; + + if (line.no_output) + return -ENXIO; + + spin_lock_irqsave(&priv->lock, flags); + if (!line.no_input) + ts5500_set_mask(line.control_mask, line.control_addr); + + if (val) + ts5500_set_mask(line.value_mask, line.value_addr); + else + ts5500_clear_mask(line.value_mask, line.value_addr); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static void ts5500_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct ts5500_priv *priv = gpiochip_get_data(chip); + const struct ts5500_dio line = priv->pinout[offset]; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (val) + ts5500_set_mask(line.value_mask, line.value_addr); + else + ts5500_clear_mask(line.value_mask, line.value_addr); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int ts5500_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct ts5500_priv *priv = gpiochip_get_data(chip); + const struct ts5500_dio *block = priv->pinout; + const struct ts5500_dio line = block[offset]; + + /* Only one pin is connected to an interrupt */ + if (line.irq) + return line.irq; + + /* As this pin is input-only, we may strap it to another in/out pin */ + if (priv->strap) + return priv->hwirq; + + return -ENXIO; +} + +static int ts5500_enable_irq(struct ts5500_priv *priv) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (priv->hwirq == 7) + ts5500_set_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */ + else if (priv->hwirq == 6) + ts5500_set_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */ + else if (priv->hwirq == 1) + ts5500_set_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */ + else + ret = -EINVAL; + spin_unlock_irqrestore(&priv->lock, flags); + + return ret; +} + +static void ts5500_disable_irq(struct ts5500_priv *priv) +{ + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (priv->hwirq == 7) + ts5500_clear_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */ + else if (priv->hwirq == 6) + ts5500_clear_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */ + else if (priv->hwirq == 1) + ts5500_clear_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */ + else + dev_err(priv->gpio_chip.parent, "invalid hwirq %d\n", + priv->hwirq); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int ts5500_dio_probe(struct platform_device *pdev) +{ + enum ts5500_blocks block = platform_get_device_id(pdev)->driver_data; + struct ts5500_dio_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct device *dev = &pdev->dev; + const char *name = dev_name(dev); + struct ts5500_priv *priv; + struct resource *res; + unsigned long flags; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(dev, "missing IRQ resource\n"); + return -EINVAL; + } + + priv = devm_kzalloc(dev, sizeof(struct ts5500_priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + priv->hwirq = res->start; + spin_lock_init(&priv->lock); + + priv->gpio_chip.owner = THIS_MODULE; + priv->gpio_chip.label = name; + priv->gpio_chip.parent = dev; + priv->gpio_chip.direction_input = ts5500_gpio_input; + priv->gpio_chip.direction_output = ts5500_gpio_output; + priv->gpio_chip.get = ts5500_gpio_get; + priv->gpio_chip.set = ts5500_gpio_set; + priv->gpio_chip.to_irq = ts5500_gpio_to_irq; + priv->gpio_chip.base = -1; + if (pdata) { + priv->gpio_chip.base = pdata->base; + priv->strap = pdata->strap; + } + + switch (block) { + case TS5500_DIO1: + priv->pinout = ts5500_dio1; + priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio1); + + if (!devm_request_region(dev, 0x7a, 3, name)) { + dev_err(dev, "failed to request %s ports\n", name); + return -EBUSY; + } + break; + case TS5500_DIO2: + priv->pinout = ts5500_dio2; + priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio2); + + if (!devm_request_region(dev, 0x7e, 2, name)) { + dev_err(dev, "failed to request %s ports\n", name); + return -EBUSY; + } + + if (hex7d_reserved) + break; + + if (!devm_request_region(dev, 0x7d, 1, name)) { + dev_err(dev, "failed to request %s 7D\n", name); + return -EBUSY; + } + + hex7d_reserved = true; + break; + case TS5500_LCD: + case TS5600_LCD: + priv->pinout = ts5500_lcd; + priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_lcd); + + if (!devm_request_region(dev, 0x72, 2, name)) { + dev_err(dev, "failed to request %s ports\n", name); + return -EBUSY; + } + + if (!hex7d_reserved) { + if (!devm_request_region(dev, 0x7d, 1, name)) { + dev_err(dev, "failed to request %s 7D\n", name); + return -EBUSY; + } + + hex7d_reserved = true; + } + + /* Ensure usage of LCD port as DIO */ + spin_lock_irqsave(&priv->lock, flags); + ts5500_clear_mask(BIT(4), 0x7d); + spin_unlock_irqrestore(&priv->lock, flags); + break; + } + + ret = devm_gpiochip_add_data(dev, &priv->gpio_chip, priv); + if (ret) { + dev_err(dev, "failed to register the gpio chip\n"); + return ret; + } + + ret = ts5500_enable_irq(priv); + if (ret) { + dev_err(dev, "invalid interrupt %d\n", priv->hwirq); + return ret; + } + + return 0; +} + +static int ts5500_dio_remove(struct platform_device *pdev) +{ + struct ts5500_priv *priv = platform_get_drvdata(pdev); + + ts5500_disable_irq(priv); + + return 0; +} + +static const struct platform_device_id ts5500_dio_ids[] = { + { "ts5500-dio1", TS5500_DIO1 }, + { "ts5500-dio2", TS5500_DIO2 }, + { "ts5500-dio-lcd", TS5500_LCD }, + { "ts5600-dio-lcd", TS5600_LCD }, + { } +}; +MODULE_DEVICE_TABLE(platform, ts5500_dio_ids); + +static struct platform_driver ts5500_dio_driver = { + .driver = { + .name = "ts5500-dio", + }, + .probe = ts5500_dio_probe, + .remove = ts5500_dio_remove, + .id_table = ts5500_dio_ids, +}; + +module_platform_driver(ts5500_dio_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Savoir-faire Linux Inc. <kernel@savoirfairelinux.com>"); +MODULE_DESCRIPTION("Technologic Systems TS-5500 Digital I/O driver"); diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c new file mode 100644 index 000000000..9b511df54 --- /dev/null +++ b/drivers/gpio/gpio-twl4030.c @@ -0,0 +1,624 @@ +/* + * Access to GPIOs on TWL4030/TPS659x0 chips + * + * Copyright (C) 2006-2007 Texas Instruments, Inc. + * Copyright (C) 2006 MontaVista Software, Inc. + * + * Code re-arranged and cleaned up by: + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * Initial Code: + * Andy Lowe / Nishanth Menon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kthread.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/irqdomain.h> + +#include <linux/mfd/twl.h> + +/* + * The GPIO "subchip" supports 18 GPIOs which can be configured as + * inputs or outputs, with pullups or pulldowns on each pin. Each + * GPIO can trigger interrupts on either or both edges. + * + * GPIO interrupts can be fed to either of two IRQ lines; this is + * intended to support multiple hosts. + * + * There are also two LED pins used sometimes as output-only GPIOs. + */ + +/* genirq interfaces are not available to modules */ +#ifdef MODULE +#define is_module() true +#else +#define is_module() false +#endif + +/* GPIO_CTRL Fields */ +#define MASK_GPIO_CTRL_GPIO0CD1 BIT(0) +#define MASK_GPIO_CTRL_GPIO1CD2 BIT(1) +#define MASK_GPIO_CTRL_GPIO_ON BIT(2) + +/* Mask for GPIO registers when aggregated into a 32-bit integer */ +#define GPIO_32_MASK 0x0003ffff + +struct gpio_twl4030_priv { + struct gpio_chip gpio_chip; + struct mutex mutex; + int irq_base; + + /* Bitfields for state caching */ + unsigned int usage_count; + unsigned int direction; + unsigned int out_state; +}; + +/*----------------------------------------------------------------------*/ + +/* + * To configure TWL4030 GPIO module registers + */ +static inline int gpio_twl4030_write(u8 address, u8 data) +{ + return twl_i2c_write_u8(TWL4030_MODULE_GPIO, data, address); +} + +/*----------------------------------------------------------------------*/ + +/* + * LED register offsets from TWL_MODULE_LED base + * PWMs A and B are dedicated to LEDs A and B, respectively. + */ + +#define TWL4030_LED_LEDEN_REG 0x00 +#define TWL4030_PWMAON_REG 0x01 +#define TWL4030_PWMAOFF_REG 0x02 +#define TWL4030_PWMBON_REG 0x03 +#define TWL4030_PWMBOFF_REG 0x04 + +/* LEDEN bits */ +#define LEDEN_LEDAON BIT(0) +#define LEDEN_LEDBON BIT(1) +#define LEDEN_LEDAEXT BIT(2) +#define LEDEN_LEDBEXT BIT(3) +#define LEDEN_LEDAPWM BIT(4) +#define LEDEN_LEDBPWM BIT(5) +#define LEDEN_PWM_LENGTHA BIT(6) +#define LEDEN_PWM_LENGTHB BIT(7) + +#define PWMxON_LENGTH BIT(7) + +/*----------------------------------------------------------------------*/ + +/* + * To read a TWL4030 GPIO module register + */ +static inline int gpio_twl4030_read(u8 address) +{ + u8 data; + int ret = 0; + + ret = twl_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address); + return (ret < 0) ? ret : data; +} + +/*----------------------------------------------------------------------*/ + +static u8 cached_leden; + +/* The LED lines are open drain outputs ... a FET pulls to GND, so an + * external pullup is needed. We could also expose the integrated PWM + * as a LED brightness control; we initialize it as "always on". + */ +static void twl4030_led_set_value(int led, int value) +{ + u8 mask = LEDEN_LEDAON | LEDEN_LEDAPWM; + + if (led) + mask <<= 1; + + if (value) + cached_leden &= ~mask; + else + cached_leden |= mask; + + WARN_ON_ONCE(twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden, + TWL4030_LED_LEDEN_REG)); +} + +static int twl4030_set_gpio_direction(int gpio, int is_input) +{ + u8 d_bnk = gpio >> 3; + u8 d_msk = BIT(gpio & 0x7); + u8 reg = 0; + u8 base = REG_GPIODATADIR1 + d_bnk; + int ret = 0; + + ret = gpio_twl4030_read(base); + if (ret >= 0) { + if (is_input) + reg = ret & ~d_msk; + else + reg = ret | d_msk; + + ret = gpio_twl4030_write(base, reg); + } + return ret; +} + +static int twl4030_set_gpio_dataout(int gpio, int enable) +{ + u8 d_bnk = gpio >> 3; + u8 d_msk = BIT(gpio & 0x7); + u8 base = 0; + + if (enable) + base = REG_SETGPIODATAOUT1 + d_bnk; + else + base = REG_CLEARGPIODATAOUT1 + d_bnk; + + return gpio_twl4030_write(base, d_msk); +} + +static int twl4030_get_gpio_datain(int gpio) +{ + u8 d_bnk = gpio >> 3; + u8 d_off = gpio & 0x7; + u8 base = 0; + int ret = 0; + + base = REG_GPIODATAIN1 + d_bnk; + ret = gpio_twl4030_read(base); + if (ret > 0) + ret = (ret >> d_off) & 0x1; + + return ret; +} + +/*----------------------------------------------------------------------*/ + +static int twl_request(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_twl4030_priv *priv = gpiochip_get_data(chip); + int status = 0; + + mutex_lock(&priv->mutex); + + /* Support the two LED outputs as output-only GPIOs. */ + if (offset >= TWL4030_GPIO_MAX) { + u8 ledclr_mask = LEDEN_LEDAON | LEDEN_LEDAEXT + | LEDEN_LEDAPWM | LEDEN_PWM_LENGTHA; + u8 reg = TWL4030_PWMAON_REG; + + offset -= TWL4030_GPIO_MAX; + if (offset) { + ledclr_mask <<= 1; + reg = TWL4030_PWMBON_REG; + } + + /* initialize PWM to always-drive */ + /* Configure PWM OFF register first */ + status = twl_i2c_write_u8(TWL4030_MODULE_LED, 0x7f, reg + 1); + if (status < 0) + goto done; + + /* Followed by PWM ON register */ + status = twl_i2c_write_u8(TWL4030_MODULE_LED, 0x7f, reg); + if (status < 0) + goto done; + + /* init LED to not-driven (high) */ + status = twl_i2c_read_u8(TWL4030_MODULE_LED, &cached_leden, + TWL4030_LED_LEDEN_REG); + if (status < 0) + goto done; + cached_leden &= ~ledclr_mask; + status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden, + TWL4030_LED_LEDEN_REG); + if (status < 0) + goto done; + + status = 0; + goto done; + } + + /* on first use, turn GPIO module "on" */ + if (!priv->usage_count) { + struct twl4030_gpio_platform_data *pdata; + u8 value = MASK_GPIO_CTRL_GPIO_ON; + + /* optionally have the first two GPIOs switch vMMC1 + * and vMMC2 power supplies based on card presence. + */ + pdata = dev_get_platdata(chip->parent); + if (pdata) + value |= pdata->mmc_cd & 0x03; + + status = gpio_twl4030_write(REG_GPIO_CTRL, value); + } + +done: + if (!status) + priv->usage_count |= BIT(offset); + + mutex_unlock(&priv->mutex); + return status; +} + +static void twl_free(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_twl4030_priv *priv = gpiochip_get_data(chip); + + mutex_lock(&priv->mutex); + if (offset >= TWL4030_GPIO_MAX) { + twl4030_led_set_value(offset - TWL4030_GPIO_MAX, 1); + goto out; + } + + priv->usage_count &= ~BIT(offset); + + /* on last use, switch off GPIO module */ + if (!priv->usage_count) + gpio_twl4030_write(REG_GPIO_CTRL, 0x0); + +out: + mutex_unlock(&priv->mutex); +} + +static int twl_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_twl4030_priv *priv = gpiochip_get_data(chip); + int ret; + + mutex_lock(&priv->mutex); + if (offset < TWL4030_GPIO_MAX) + ret = twl4030_set_gpio_direction(offset, 1); + else + ret = -EINVAL; /* LED outputs can't be set as input */ + + if (!ret) + priv->direction &= ~BIT(offset); + + mutex_unlock(&priv->mutex); + + return ret; +} + +static int twl_get(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_twl4030_priv *priv = gpiochip_get_data(chip); + int ret; + int status = 0; + + mutex_lock(&priv->mutex); + if (!(priv->usage_count & BIT(offset))) { + ret = -EPERM; + goto out; + } + + if (priv->direction & BIT(offset)) + status = priv->out_state & BIT(offset); + else + status = twl4030_get_gpio_datain(offset); + + ret = (status < 0) ? status : !!status; +out: + mutex_unlock(&priv->mutex); + return ret; +} + +static void twl_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct gpio_twl4030_priv *priv = gpiochip_get_data(chip); + + mutex_lock(&priv->mutex); + if (offset < TWL4030_GPIO_MAX) + twl4030_set_gpio_dataout(offset, value); + else + twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value); + + if (value) + priv->out_state |= BIT(offset); + else + priv->out_state &= ~BIT(offset); + + mutex_unlock(&priv->mutex); +} + +static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value) +{ + struct gpio_twl4030_priv *priv = gpiochip_get_data(chip); + int ret = 0; + + mutex_lock(&priv->mutex); + if (offset < TWL4030_GPIO_MAX) { + ret = twl4030_set_gpio_direction(offset, 0); + if (ret) { + mutex_unlock(&priv->mutex); + return ret; + } + } + + /* + * LED gpios i.e. offset >= TWL4030_GPIO_MAX are always output + */ + + priv->direction |= BIT(offset); + mutex_unlock(&priv->mutex); + + twl_set(chip, offset, value); + + return ret; +} + +static int twl_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_twl4030_priv *priv = gpiochip_get_data(chip); + + return (priv->irq_base && (offset < TWL4030_GPIO_MAX)) + ? (priv->irq_base + offset) + : -EINVAL; +} + +static const struct gpio_chip template_chip = { + .label = "twl4030", + .owner = THIS_MODULE, + .request = twl_request, + .free = twl_free, + .direction_input = twl_direction_in, + .get = twl_get, + .direction_output = twl_direction_out, + .set = twl_set, + .to_irq = twl_to_irq, + .can_sleep = true, +}; + +/*----------------------------------------------------------------------*/ + +static int gpio_twl4030_pulls(u32 ups, u32 downs) +{ + u8 message[5]; + unsigned i, gpio_bit; + + /* For most pins, a pulldown was enabled by default. + * We should have data that's specific to this board. + */ + for (gpio_bit = 1, i = 0; i < 5; i++) { + u8 bit_mask; + unsigned j; + + for (bit_mask = 0, j = 0; j < 8; j += 2, gpio_bit <<= 1) { + if (ups & gpio_bit) + bit_mask |= 1 << (j + 1); + else if (downs & gpio_bit) + bit_mask |= 1 << (j + 0); + } + message[i] = bit_mask; + } + + return twl_i2c_write(TWL4030_MODULE_GPIO, message, + REG_GPIOPUPDCTR1, 5); +} + +static int gpio_twl4030_debounce(u32 debounce, u8 mmc_cd) +{ + u8 message[3]; + + /* 30 msec of debouncing is always used for MMC card detect, + * and is optional for everything else. + */ + message[0] = (debounce & 0xff) | (mmc_cd & 0x03); + debounce >>= 8; + message[1] = (debounce & 0xff); + debounce >>= 8; + message[2] = (debounce & 0x03); + + return twl_i2c_write(TWL4030_MODULE_GPIO, message, + REG_GPIO_DEBEN1, 3); +} + +static int gpio_twl4030_remove(struct platform_device *pdev); + +static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev, + struct twl4030_gpio_platform_data *pdata) +{ + struct twl4030_gpio_platform_data *omap_twl_info; + + omap_twl_info = devm_kzalloc(dev, sizeof(*omap_twl_info), GFP_KERNEL); + if (!omap_twl_info) + return NULL; + + if (pdata) + *omap_twl_info = *pdata; + + omap_twl_info->use_leds = of_property_read_bool(dev->of_node, + "ti,use-leds"); + + of_property_read_u32(dev->of_node, "ti,debounce", + &omap_twl_info->debounce); + of_property_read_u32(dev->of_node, "ti,mmc-cd", + (u32 *)&omap_twl_info->mmc_cd); + of_property_read_u32(dev->of_node, "ti,pullups", + &omap_twl_info->pullups); + of_property_read_u32(dev->of_node, "ti,pulldowns", + &omap_twl_info->pulldowns); + + return omap_twl_info; +} + +static int gpio_twl4030_probe(struct platform_device *pdev) +{ + struct twl4030_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node *node = pdev->dev.of_node; + struct gpio_twl4030_priv *priv; + int ret, irq_base; + + priv = devm_kzalloc(&pdev->dev, sizeof(struct gpio_twl4030_priv), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* maybe setup IRQs */ + if (is_module()) { + dev_err(&pdev->dev, "can't dispatch IRQs from modules\n"); + goto no_irqs; + } + + irq_base = devm_irq_alloc_descs(&pdev->dev, -1, + 0, TWL4030_GPIO_MAX, 0); + if (irq_base < 0) { + dev_err(&pdev->dev, "Failed to alloc irq_descs\n"); + return irq_base; + } + + irq_domain_add_legacy(node, TWL4030_GPIO_MAX, irq_base, 0, + &irq_domain_simple_ops, NULL); + + ret = twl4030_sih_setup(&pdev->dev, TWL4030_MODULE_GPIO, irq_base); + if (ret < 0) + return ret; + + priv->irq_base = irq_base; + +no_irqs: + priv->gpio_chip = template_chip; + priv->gpio_chip.base = -1; + priv->gpio_chip.ngpio = TWL4030_GPIO_MAX; + priv->gpio_chip.parent = &pdev->dev; + + mutex_init(&priv->mutex); + + if (node) + pdata = of_gpio_twl4030(&pdev->dev, pdata); + + if (pdata == NULL) { + dev_err(&pdev->dev, "Platform data is missing\n"); + return -ENXIO; + } + + /* + * NOTE: boards may waste power if they don't set pullups + * and pulldowns correctly ... default for non-ULPI pins is + * pulldown, and some other pins may have external pullups + * or pulldowns. Careful! + */ + ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); + if (ret) + dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", + pdata->pullups, pdata->pulldowns, ret); + + ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); + if (ret) + dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", + pdata->debounce, pdata->mmc_cd, ret); + + /* + * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, + * is (still) clear if use_leds is set. + */ + if (pdata->use_leds) + priv->gpio_chip.ngpio += 2; + + ret = gpiochip_add_data(&priv->gpio_chip, priv); + if (ret < 0) { + dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret); + priv->gpio_chip.ngpio = 0; + gpio_twl4030_remove(pdev); + goto out; + } + + platform_set_drvdata(pdev, priv); + + if (pdata->setup) { + int status; + + status = pdata->setup(&pdev->dev, priv->gpio_chip.base, + TWL4030_GPIO_MAX); + if (status) + dev_dbg(&pdev->dev, "setup --> %d\n", status); + } + +out: + return ret; +} + +/* Cannot use as gpio_twl4030_probe() calls us */ +static int gpio_twl4030_remove(struct platform_device *pdev) +{ + struct twl4030_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct gpio_twl4030_priv *priv = platform_get_drvdata(pdev); + int status; + + if (pdata && pdata->teardown) { + status = pdata->teardown(&pdev->dev, priv->gpio_chip.base, + TWL4030_GPIO_MAX); + if (status) { + dev_dbg(&pdev->dev, "teardown --> %d\n", status); + return status; + } + } + + gpiochip_remove(&priv->gpio_chip); + + if (is_module()) + return 0; + + /* REVISIT no support yet for deregistering all the IRQs */ + WARN_ON(1); + return -EIO; +} + +static const struct of_device_id twl_gpio_match[] = { + { .compatible = "ti,twl4030-gpio", }, + { }, +}; +MODULE_DEVICE_TABLE(of, twl_gpio_match); + +/* Note: this hardware lives inside an I2C-based multi-function device. */ +MODULE_ALIAS("platform:twl4030_gpio"); + +static struct platform_driver gpio_twl4030_driver = { + .driver = { + .name = "twl4030_gpio", + .of_match_table = twl_gpio_match, + }, + .probe = gpio_twl4030_probe, + .remove = gpio_twl4030_remove, +}; + +static int __init gpio_twl4030_init(void) +{ + return platform_driver_register(&gpio_twl4030_driver); +} +subsys_initcall(gpio_twl4030_init); + +static void __exit gpio_twl4030_exit(void) +{ + platform_driver_unregister(&gpio_twl4030_driver); +} +module_exit(gpio_twl4030_exit); + +MODULE_AUTHOR("Texas Instruments, Inc."); +MODULE_DESCRIPTION("GPIO interface for TWL4030"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-twl6040.c b/drivers/gpio/gpio-twl6040.c new file mode 100644 index 000000000..dadeacf43 --- /dev/null +++ b/drivers/gpio/gpio-twl6040.c @@ -0,0 +1,124 @@ +/* + * Access to GPOs on TWL6040 chip + * + * Copyright (C) 2012 Texas Instruments, Inc. + * + * Authors: + * Sergio Aguirre <saaguirre@ti.com> + * Peter Ujfalusi <peter.ujfalusi@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kthread.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/of.h> + +#include <linux/mfd/twl6040.h> + +static int twl6040gpo_get(struct gpio_chip *chip, unsigned offset) +{ + struct twl6040 *twl6040 = dev_get_drvdata(chip->parent->parent); + int ret = 0; + + ret = twl6040_reg_read(twl6040, TWL6040_REG_GPOCTL); + if (ret < 0) + return ret; + + return (ret >> offset) & 1; +} + +static int twl6040gpo_direction_out(struct gpio_chip *chip, unsigned offset, + int value) +{ + /* This only drives GPOs, and can't change direction */ + return 0; +} + +static void twl6040gpo_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct twl6040 *twl6040 = dev_get_drvdata(chip->parent->parent); + int ret; + u8 gpoctl; + + ret = twl6040_reg_read(twl6040, TWL6040_REG_GPOCTL); + if (ret < 0) + return; + + if (value) + gpoctl = ret | (1 << offset); + else + gpoctl = ret & ~(1 << offset); + + twl6040_reg_write(twl6040, TWL6040_REG_GPOCTL, gpoctl); +} + +static struct gpio_chip twl6040gpo_chip = { + .label = "twl6040", + .owner = THIS_MODULE, + .get = twl6040gpo_get, + .direction_output = twl6040gpo_direction_out, + .set = twl6040gpo_set, + .can_sleep = true, +}; + +/*----------------------------------------------------------------------*/ + +static int gpo_twl6040_probe(struct platform_device *pdev) +{ + struct device *twl6040_core_dev = pdev->dev.parent; + struct twl6040 *twl6040 = dev_get_drvdata(twl6040_core_dev); + int ret; + + twl6040gpo_chip.base = -1; + + if (twl6040_get_revid(twl6040) < TWL6041_REV_ES2_0) + twl6040gpo_chip.ngpio = 3; /* twl6040 have 3 GPO */ + else + twl6040gpo_chip.ngpio = 1; /* twl6041 have 1 GPO */ + + twl6040gpo_chip.parent = &pdev->dev; +#ifdef CONFIG_OF_GPIO + twl6040gpo_chip.of_node = twl6040_core_dev->of_node; +#endif + + ret = devm_gpiochip_add_data(&pdev->dev, &twl6040gpo_chip, NULL); + if (ret < 0) { + dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret); + twl6040gpo_chip.ngpio = 0; + } + + return ret; +} + +/* Note: this hardware lives inside an I2C-based multi-function device. */ +MODULE_ALIAS("platform:twl6040-gpo"); + +static struct platform_driver gpo_twl6040_driver = { + .driver = { + .name = "twl6040-gpo", + }, + .probe = gpo_twl6040_probe, +}; + +module_platform_driver(gpo_twl6040_driver); + +MODULE_AUTHOR("Texas Instruments, Inc."); +MODULE_DESCRIPTION("GPO interface for TWL6040"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-ucb1400.c b/drivers/gpio/gpio-ucb1400.c new file mode 100644 index 000000000..5dbe31bf6 --- /dev/null +++ b/drivers/gpio/gpio-ucb1400.c @@ -0,0 +1,108 @@ +/* + * Philips UCB1400 GPIO driver + * + * Author: Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/ucb1400.h> + +static int ucb1400_gpio_dir_in(struct gpio_chip *gc, unsigned off) +{ + struct ucb1400_gpio *gpio; + gpio = gpiochip_get_data(gc); + ucb1400_gpio_set_direction(gpio->ac97, off, 0); + return 0; +} + +static int ucb1400_gpio_dir_out(struct gpio_chip *gc, unsigned off, int val) +{ + struct ucb1400_gpio *gpio; + gpio = gpiochip_get_data(gc); + ucb1400_gpio_set_direction(gpio->ac97, off, 1); + ucb1400_gpio_set_value(gpio->ac97, off, val); + return 0; +} + +static int ucb1400_gpio_get(struct gpio_chip *gc, unsigned off) +{ + struct ucb1400_gpio *gpio; + + gpio = gpiochip_get_data(gc); + return !!ucb1400_gpio_get_value(gpio->ac97, off); +} + +static void ucb1400_gpio_set(struct gpio_chip *gc, unsigned off, int val) +{ + struct ucb1400_gpio *gpio; + gpio = gpiochip_get_data(gc); + ucb1400_gpio_set_value(gpio->ac97, off, val); +} + +static int ucb1400_gpio_probe(struct platform_device *dev) +{ + struct ucb1400_gpio *ucb = dev_get_platdata(&dev->dev); + int err = 0; + + if (!(ucb && ucb->gpio_offset)) { + err = -EINVAL; + goto err; + } + + platform_set_drvdata(dev, ucb); + + ucb->gc.label = "ucb1400_gpio"; + ucb->gc.base = ucb->gpio_offset; + ucb->gc.ngpio = 10; + ucb->gc.owner = THIS_MODULE; + + ucb->gc.direction_input = ucb1400_gpio_dir_in; + ucb->gc.direction_output = ucb1400_gpio_dir_out; + ucb->gc.get = ucb1400_gpio_get; + ucb->gc.set = ucb1400_gpio_set; + ucb->gc.can_sleep = true; + + err = devm_gpiochip_add_data(&dev->dev, &ucb->gc, ucb); + if (err) + goto err; + + if (ucb->gpio_setup) + err = ucb->gpio_setup(&dev->dev, ucb->gc.ngpio); + +err: + return err; + +} + +static int ucb1400_gpio_remove(struct platform_device *dev) +{ + int err = 0; + struct ucb1400_gpio *ucb = platform_get_drvdata(dev); + + if (ucb && ucb->gpio_teardown) { + err = ucb->gpio_teardown(&dev->dev, ucb->gc.ngpio); + if (err) + return err; + } + + return err; +} + +static struct platform_driver ucb1400_gpio_driver = { + .probe = ucb1400_gpio_probe, + .remove = ucb1400_gpio_remove, + .driver = { + .name = "ucb1400_gpio" + }, +}; + +module_platform_driver(ucb1400_gpio_driver); + +MODULE_DESCRIPTION("Philips UCB1400 GPIO driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ucb1400_gpio"); diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c new file mode 100644 index 000000000..c72ec3ddf --- /dev/null +++ b/drivers/gpio/gpio-uniphier.c @@ -0,0 +1,510 @@ +/* + * Copyright (C) 2017 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitops.h> +#include <linux/gpio/driver.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <dt-bindings/gpio/uniphier-gpio.h> + +#define UNIPHIER_GPIO_BANK_MASK \ + GENMASK((UNIPHIER_GPIO_LINES_PER_BANK) - 1, 0) + +#define UNIPHIER_GPIO_IRQ_MAX_NUM 24 + +#define UNIPHIER_GPIO_PORT_DATA 0x0 /* data */ +#define UNIPHIER_GPIO_PORT_DIR 0x4 /* direction (1:in, 0:out) */ +#define UNIPHIER_GPIO_IRQ_EN 0x90 /* irq enable */ +#define UNIPHIER_GPIO_IRQ_MODE 0x94 /* irq mode (1: both edge) */ +#define UNIPHIER_GPIO_IRQ_FLT_EN 0x98 /* noise filter enable */ +#define UNIPHIER_GPIO_IRQ_FLT_CYC 0x9c /* noise filter clock cycle */ + +struct uniphier_gpio_priv { + struct gpio_chip chip; + struct irq_chip irq_chip; + struct irq_domain *domain; + void __iomem *regs; + spinlock_t lock; + u32 saved_vals[0]; +}; + +static unsigned int uniphier_gpio_bank_to_reg(unsigned int bank) +{ + unsigned int reg; + + reg = (bank + 1) * 8; + + /* + * Unfortunately, the GPIO port registers are not contiguous because + * offset 0x90-0x9f is used for IRQ. Add 0x10 when crossing the region. + */ + if (reg >= UNIPHIER_GPIO_IRQ_EN) + reg += 0x10; + + return reg; +} + +static void uniphier_gpio_get_bank_and_mask(unsigned int offset, + unsigned int *bank, u32 *mask) +{ + *bank = offset / UNIPHIER_GPIO_LINES_PER_BANK; + *mask = BIT(offset % UNIPHIER_GPIO_LINES_PER_BANK); +} + +static void uniphier_gpio_reg_update(struct uniphier_gpio_priv *priv, + unsigned int reg, u32 mask, u32 val) +{ + unsigned long flags; + u32 tmp; + + spin_lock_irqsave(&priv->lock, flags); + tmp = readl(priv->regs + reg); + tmp &= ~mask; + tmp |= mask & val; + writel(tmp, priv->regs + reg); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void uniphier_gpio_bank_write(struct gpio_chip *chip, unsigned int bank, + unsigned int reg, u32 mask, u32 val) +{ + struct uniphier_gpio_priv *priv = gpiochip_get_data(chip); + + if (!mask) + return; + + uniphier_gpio_reg_update(priv, uniphier_gpio_bank_to_reg(bank) + reg, + mask, val); +} + +static void uniphier_gpio_offset_write(struct gpio_chip *chip, + unsigned int offset, unsigned int reg, + int val) +{ + unsigned int bank; + u32 mask; + + uniphier_gpio_get_bank_and_mask(offset, &bank, &mask); + + uniphier_gpio_bank_write(chip, bank, reg, mask, val ? mask : 0); +} + +static int uniphier_gpio_offset_read(struct gpio_chip *chip, + unsigned int offset, unsigned int reg) +{ + struct uniphier_gpio_priv *priv = gpiochip_get_data(chip); + unsigned int bank, reg_offset; + u32 mask; + + uniphier_gpio_get_bank_and_mask(offset, &bank, &mask); + reg_offset = uniphier_gpio_bank_to_reg(bank) + reg; + + return !!(readl(priv->regs + reg_offset) & mask); +} + +static int uniphier_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + return uniphier_gpio_offset_read(chip, offset, UNIPHIER_GPIO_PORT_DIR); +} + +static int uniphier_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + uniphier_gpio_offset_write(chip, offset, UNIPHIER_GPIO_PORT_DIR, 1); + + return 0; +} + +static int uniphier_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int val) +{ + uniphier_gpio_offset_write(chip, offset, UNIPHIER_GPIO_PORT_DATA, val); + uniphier_gpio_offset_write(chip, offset, UNIPHIER_GPIO_PORT_DIR, 0); + + return 0; +} + +static int uniphier_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + return uniphier_gpio_offset_read(chip, offset, UNIPHIER_GPIO_PORT_DATA); +} + +static void uniphier_gpio_set(struct gpio_chip *chip, + unsigned int offset, int val) +{ + uniphier_gpio_offset_write(chip, offset, UNIPHIER_GPIO_PORT_DATA, val); +} + +static void uniphier_gpio_set_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + unsigned int bank, shift, bank_mask, bank_bits; + int i; + + for (i = 0; i < chip->ngpio; i += UNIPHIER_GPIO_LINES_PER_BANK) { + bank = i / UNIPHIER_GPIO_LINES_PER_BANK; + shift = i % BITS_PER_LONG; + bank_mask = (mask[BIT_WORD(i)] >> shift) & + UNIPHIER_GPIO_BANK_MASK; + bank_bits = bits[BIT_WORD(i)] >> shift; + + uniphier_gpio_bank_write(chip, bank, UNIPHIER_GPIO_PORT_DATA, + bank_mask, bank_bits); + } +} + +static int uniphier_gpio_to_irq(struct gpio_chip *chip, unsigned int offset) +{ + struct irq_fwspec fwspec; + + if (offset < UNIPHIER_GPIO_IRQ_OFFSET) + return -ENXIO; + + fwspec.fwnode = of_node_to_fwnode(chip->parent->of_node); + fwspec.param_count = 2; + fwspec.param[0] = offset - UNIPHIER_GPIO_IRQ_OFFSET; + /* + * IRQ_TYPE_NONE is rejected by the parent irq domain. Set LEVEL_HIGH + * temporarily. Anyway, ->irq_set_type() will override it later. + */ + fwspec.param[1] = IRQ_TYPE_LEVEL_HIGH; + + return irq_create_fwspec_mapping(&fwspec); +} + +static void uniphier_gpio_irq_mask(struct irq_data *data) +{ + struct uniphier_gpio_priv *priv = data->chip_data; + u32 mask = BIT(data->hwirq); + + uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, 0); + + irq_chip_mask_parent(data); +} + +static void uniphier_gpio_irq_unmask(struct irq_data *data) +{ + struct uniphier_gpio_priv *priv = data->chip_data; + u32 mask = BIT(data->hwirq); + + uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, mask); + + irq_chip_unmask_parent(data); +} + +static int uniphier_gpio_irq_set_type(struct irq_data *data, unsigned int type) +{ + struct uniphier_gpio_priv *priv = data->chip_data; + u32 mask = BIT(data->hwirq); + u32 val = 0; + + if (type == IRQ_TYPE_EDGE_BOTH) { + val = mask; + type = IRQ_TYPE_EDGE_FALLING; + } + + uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_MODE, mask, val); + /* To enable both edge detection, the noise filter must be enabled. */ + uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_FLT_EN, mask, val); + + return irq_chip_set_type_parent(data, type); +} + +static int uniphier_gpio_irq_get_parent_hwirq(struct uniphier_gpio_priv *priv, + unsigned int hwirq) +{ + struct device_node *np = priv->chip.parent->of_node; + const __be32 *range; + u32 base, parent_base, size; + int len; + + range = of_get_property(np, "socionext,interrupt-ranges", &len); + if (!range) + return -EINVAL; + + len /= sizeof(*range); + + for (; len >= 3; len -= 3) { + base = be32_to_cpu(*range++); + parent_base = be32_to_cpu(*range++); + size = be32_to_cpu(*range++); + + if (base <= hwirq && hwirq < base + size) + return hwirq - base + parent_base; + } + + return -ENOENT; +} + +static int uniphier_gpio_irq_domain_translate(struct irq_domain *domain, + struct irq_fwspec *fwspec, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + if (WARN_ON(fwspec->param_count < 2)) + return -EINVAL; + + *out_hwirq = fwspec->param[0]; + *out_type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; + + return 0; +} + +static int uniphier_gpio_irq_domain_alloc(struct irq_domain *domain, + unsigned int virq, + unsigned int nr_irqs, void *arg) +{ + struct uniphier_gpio_priv *priv = domain->host_data; + struct irq_fwspec parent_fwspec; + irq_hw_number_t hwirq; + unsigned int type; + int ret; + + if (WARN_ON(nr_irqs != 1)) + return -EINVAL; + + ret = uniphier_gpio_irq_domain_translate(domain, arg, &hwirq, &type); + if (ret) + return ret; + + ret = uniphier_gpio_irq_get_parent_hwirq(priv, hwirq); + if (ret < 0) + return ret; + + /* parent is UniPhier AIDET */ + parent_fwspec.fwnode = domain->parent->fwnode; + parent_fwspec.param_count = 2; + parent_fwspec.param[0] = ret; + parent_fwspec.param[1] = (type == IRQ_TYPE_EDGE_BOTH) ? + IRQ_TYPE_EDGE_FALLING : type; + + ret = irq_domain_set_hwirq_and_chip(domain, virq, hwirq, + &priv->irq_chip, priv); + if (ret) + return ret; + + return irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec); +} + +static int uniphier_gpio_irq_domain_activate(struct irq_domain *domain, + struct irq_data *data, bool early) +{ + struct uniphier_gpio_priv *priv = domain->host_data; + struct gpio_chip *chip = &priv->chip; + + return gpiochip_lock_as_irq(chip, data->hwirq + UNIPHIER_GPIO_IRQ_OFFSET); +} + +static void uniphier_gpio_irq_domain_deactivate(struct irq_domain *domain, + struct irq_data *data) +{ + struct uniphier_gpio_priv *priv = domain->host_data; + struct gpio_chip *chip = &priv->chip; + + gpiochip_unlock_as_irq(chip, data->hwirq + UNIPHIER_GPIO_IRQ_OFFSET); +} + +static const struct irq_domain_ops uniphier_gpio_irq_domain_ops = { + .alloc = uniphier_gpio_irq_domain_alloc, + .free = irq_domain_free_irqs_common, + .activate = uniphier_gpio_irq_domain_activate, + .deactivate = uniphier_gpio_irq_domain_deactivate, + .translate = uniphier_gpio_irq_domain_translate, +}; + +static void uniphier_gpio_hw_init(struct uniphier_gpio_priv *priv) +{ + /* + * Due to the hardware design, the noise filter must be enabled to + * detect both edge interrupts. This filter is intended to remove the + * noise from the irq lines. It does not work for GPIO input, so GPIO + * debounce is not supported. Unfortunately, the filter period is + * shared among all irq lines. Just choose a sensible period here. + */ + writel(0xff, priv->regs + UNIPHIER_GPIO_IRQ_FLT_CYC); +} + +static unsigned int uniphier_gpio_get_nbanks(unsigned int ngpio) +{ + return DIV_ROUND_UP(ngpio, UNIPHIER_GPIO_LINES_PER_BANK); +} + +static int uniphier_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *parent_np; + struct irq_domain *parent_domain; + struct uniphier_gpio_priv *priv; + struct gpio_chip *chip; + struct irq_chip *irq_chip; + struct resource *regs; + unsigned int nregs; + u32 ngpios; + int ret; + + parent_np = of_irq_find_parent(dev->of_node); + if (!parent_np) + return -ENXIO; + + parent_domain = irq_find_host(parent_np); + of_node_put(parent_np); + if (!parent_domain) + return -EPROBE_DEFER; + + ret = of_property_read_u32(dev->of_node, "ngpios", &ngpios); + if (ret) + return ret; + + nregs = uniphier_gpio_get_nbanks(ngpios) * 2 + 3; + priv = devm_kzalloc(dev, struct_size(priv, saved_vals, nregs), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->regs = devm_ioremap_resource(dev, regs); + if (IS_ERR(priv->regs)) + return PTR_ERR(priv->regs); + + spin_lock_init(&priv->lock); + + chip = &priv->chip; + chip->label = dev_name(dev); + chip->parent = dev; + chip->request = gpiochip_generic_request; + chip->free = gpiochip_generic_free; + chip->get_direction = uniphier_gpio_get_direction; + chip->direction_input = uniphier_gpio_direction_input; + chip->direction_output = uniphier_gpio_direction_output; + chip->get = uniphier_gpio_get; + chip->set = uniphier_gpio_set; + chip->set_multiple = uniphier_gpio_set_multiple; + chip->to_irq = uniphier_gpio_to_irq; + chip->base = -1; + chip->ngpio = ngpios; + + irq_chip = &priv->irq_chip; + irq_chip->name = dev_name(dev); + irq_chip->irq_mask = uniphier_gpio_irq_mask; + irq_chip->irq_unmask = uniphier_gpio_irq_unmask; + irq_chip->irq_eoi = irq_chip_eoi_parent; + irq_chip->irq_set_affinity = irq_chip_set_affinity_parent; + irq_chip->irq_set_type = uniphier_gpio_irq_set_type; + + uniphier_gpio_hw_init(priv); + + ret = devm_gpiochip_add_data(dev, chip, priv); + if (ret) + return ret; + + priv->domain = irq_domain_create_hierarchy( + parent_domain, 0, + UNIPHIER_GPIO_IRQ_MAX_NUM, + of_node_to_fwnode(dev->of_node), + &uniphier_gpio_irq_domain_ops, priv); + if (!priv->domain) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + + return 0; +} + +static int uniphier_gpio_remove(struct platform_device *pdev) +{ + struct uniphier_gpio_priv *priv = platform_get_drvdata(pdev); + + irq_domain_remove(priv->domain); + + return 0; +} + +static int __maybe_unused uniphier_gpio_suspend(struct device *dev) +{ + struct uniphier_gpio_priv *priv = dev_get_drvdata(dev); + unsigned int nbanks = uniphier_gpio_get_nbanks(priv->chip.ngpio); + u32 *val = priv->saved_vals; + unsigned int reg; + int i; + + for (i = 0; i < nbanks; i++) { + reg = uniphier_gpio_bank_to_reg(i); + + *val++ = readl(priv->regs + reg + UNIPHIER_GPIO_PORT_DATA); + *val++ = readl(priv->regs + reg + UNIPHIER_GPIO_PORT_DIR); + } + + *val++ = readl(priv->regs + UNIPHIER_GPIO_IRQ_EN); + *val++ = readl(priv->regs + UNIPHIER_GPIO_IRQ_MODE); + *val++ = readl(priv->regs + UNIPHIER_GPIO_IRQ_FLT_EN); + + return 0; +} + +static int __maybe_unused uniphier_gpio_resume(struct device *dev) +{ + struct uniphier_gpio_priv *priv = dev_get_drvdata(dev); + unsigned int nbanks = uniphier_gpio_get_nbanks(priv->chip.ngpio); + const u32 *val = priv->saved_vals; + unsigned int reg; + int i; + + for (i = 0; i < nbanks; i++) { + reg = uniphier_gpio_bank_to_reg(i); + + writel(*val++, priv->regs + reg + UNIPHIER_GPIO_PORT_DATA); + writel(*val++, priv->regs + reg + UNIPHIER_GPIO_PORT_DIR); + } + + writel(*val++, priv->regs + UNIPHIER_GPIO_IRQ_EN); + writel(*val++, priv->regs + UNIPHIER_GPIO_IRQ_MODE); + writel(*val++, priv->regs + UNIPHIER_GPIO_IRQ_FLT_EN); + + uniphier_gpio_hw_init(priv); + + return 0; +} + +static const struct dev_pm_ops uniphier_gpio_pm_ops = { + SET_LATE_SYSTEM_SLEEP_PM_OPS(uniphier_gpio_suspend, + uniphier_gpio_resume) +}; + +static const struct of_device_id uniphier_gpio_match[] = { + { .compatible = "socionext,uniphier-gpio" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, uniphier_gpio_match); + +static struct platform_driver uniphier_gpio_driver = { + .probe = uniphier_gpio_probe, + .remove = uniphier_gpio_remove, + .driver = { + .name = "uniphier-gpio", + .of_match_table = uniphier_gpio_match, + .pm = &uniphier_gpio_pm_ops, + }, +}; +module_platform_driver(uniphier_gpio_driver); + +MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>"); +MODULE_DESCRIPTION("UniPhier GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c new file mode 100644 index 000000000..f7692999d --- /dev/null +++ b/drivers/gpio/gpio-vf610.c @@ -0,0 +1,332 @@ +/* + * Freescale vf610 GPIO support through PORT and GPIO + * + * Copyright (c) 2014 Toradex AG. + * + * Author: Stefan Agner <stefan@agner.ch>. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> + +#define VF610_GPIO_PER_PORT 32 + +struct fsl_gpio_soc_data { + /* SoCs has a Port Data Direction Register (PDDR) */ + bool have_paddr; +}; + +struct vf610_gpio_port { + struct gpio_chip gc; + struct irq_chip ic; + void __iomem *base; + void __iomem *gpio_base; + const struct fsl_gpio_soc_data *sdata; + u8 irqc[VF610_GPIO_PER_PORT]; + int irq; +}; + +#define GPIO_PDOR 0x00 +#define GPIO_PSOR 0x04 +#define GPIO_PCOR 0x08 +#define GPIO_PTOR 0x0c +#define GPIO_PDIR 0x10 +#define GPIO_PDDR 0x14 + +#define PORT_PCR(n) ((n) * 0x4) +#define PORT_PCR_IRQC_OFFSET 16 + +#define PORT_ISFR 0xa0 +#define PORT_DFER 0xc0 +#define PORT_DFCR 0xc4 +#define PORT_DFWR 0xc8 + +#define PORT_INT_OFF 0x0 +#define PORT_INT_LOGIC_ZERO 0x8 +#define PORT_INT_RISING_EDGE 0x9 +#define PORT_INT_FALLING_EDGE 0xa +#define PORT_INT_EITHER_EDGE 0xb +#define PORT_INT_LOGIC_ONE 0xc + +static const struct fsl_gpio_soc_data imx_data = { + .have_paddr = true, +}; + +static const struct of_device_id vf610_gpio_dt_ids[] = { + { .compatible = "fsl,vf610-gpio", .data = NULL, }, + { .compatible = "fsl,imx7ulp-gpio", .data = &imx_data, }, + { /* sentinel */ } +}; + +static inline void vf610_gpio_writel(u32 val, void __iomem *reg) +{ + writel_relaxed(val, reg); +} + +static inline u32 vf610_gpio_readl(void __iomem *reg) +{ + return readl_relaxed(reg); +} + +static int vf610_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct vf610_gpio_port *port = gpiochip_get_data(gc); + unsigned long mask = BIT(gpio); + void __iomem *addr; + + if (port->sdata && port->sdata->have_paddr) { + mask &= vf610_gpio_readl(port->gpio_base + GPIO_PDDR); + addr = mask ? port->gpio_base + GPIO_PDOR : + port->gpio_base + GPIO_PDIR; + return !!(vf610_gpio_readl(addr) & BIT(gpio)); + } else { + return !!(vf610_gpio_readl(port->gpio_base + GPIO_PDIR) + & BIT(gpio)); + } +} + +static void vf610_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct vf610_gpio_port *port = gpiochip_get_data(gc); + unsigned long mask = BIT(gpio); + + if (val) + vf610_gpio_writel(mask, port->gpio_base + GPIO_PSOR); + else + vf610_gpio_writel(mask, port->gpio_base + GPIO_PCOR); +} + +static int vf610_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + struct vf610_gpio_port *port = gpiochip_get_data(chip); + unsigned long mask = BIT(gpio); + u32 val; + + if (port->sdata && port->sdata->have_paddr) { + val = vf610_gpio_readl(port->gpio_base + GPIO_PDDR); + val &= ~mask; + vf610_gpio_writel(val, port->gpio_base + GPIO_PDDR); + } + + return pinctrl_gpio_direction_input(chip->base + gpio); +} + +static int vf610_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, + int value) +{ + struct vf610_gpio_port *port = gpiochip_get_data(chip); + unsigned long mask = BIT(gpio); + u32 val; + + if (port->sdata && port->sdata->have_paddr) { + val = vf610_gpio_readl(port->gpio_base + GPIO_PDDR); + val |= mask; + vf610_gpio_writel(val, port->gpio_base + GPIO_PDDR); + } + + vf610_gpio_set(chip, gpio, value); + + return pinctrl_gpio_direction_output(chip->base + gpio); +} + +static void vf610_gpio_irq_handler(struct irq_desc *desc) +{ + struct vf610_gpio_port *port = + gpiochip_get_data(irq_desc_get_handler_data(desc)); + struct irq_chip *chip = irq_desc_get_chip(desc); + int pin; + unsigned long irq_isfr; + + chained_irq_enter(chip, desc); + + irq_isfr = vf610_gpio_readl(port->base + PORT_ISFR); + + for_each_set_bit(pin, &irq_isfr, VF610_GPIO_PER_PORT) { + vf610_gpio_writel(BIT(pin), port->base + PORT_ISFR); + + generic_handle_irq(irq_find_mapping(port->gc.irq.domain, pin)); + } + + chained_irq_exit(chip, desc); +} + +static void vf610_gpio_irq_ack(struct irq_data *d) +{ + struct vf610_gpio_port *port = + gpiochip_get_data(irq_data_get_irq_chip_data(d)); + int gpio = d->hwirq; + + vf610_gpio_writel(BIT(gpio), port->base + PORT_ISFR); +} + +static int vf610_gpio_irq_set_type(struct irq_data *d, u32 type) +{ + struct vf610_gpio_port *port = + gpiochip_get_data(irq_data_get_irq_chip_data(d)); + u8 irqc; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + irqc = PORT_INT_RISING_EDGE; + break; + case IRQ_TYPE_EDGE_FALLING: + irqc = PORT_INT_FALLING_EDGE; + break; + case IRQ_TYPE_EDGE_BOTH: + irqc = PORT_INT_EITHER_EDGE; + break; + case IRQ_TYPE_LEVEL_LOW: + irqc = PORT_INT_LOGIC_ZERO; + break; + case IRQ_TYPE_LEVEL_HIGH: + irqc = PORT_INT_LOGIC_ONE; + break; + default: + return -EINVAL; + } + + port->irqc[d->hwirq] = irqc; + + if (type & IRQ_TYPE_LEVEL_MASK) + irq_set_handler_locked(d, handle_level_irq); + else + irq_set_handler_locked(d, handle_edge_irq); + + return 0; +} + +static void vf610_gpio_irq_mask(struct irq_data *d) +{ + struct vf610_gpio_port *port = + gpiochip_get_data(irq_data_get_irq_chip_data(d)); + void __iomem *pcr_base = port->base + PORT_PCR(d->hwirq); + + vf610_gpio_writel(0, pcr_base); +} + +static void vf610_gpio_irq_unmask(struct irq_data *d) +{ + struct vf610_gpio_port *port = + gpiochip_get_data(irq_data_get_irq_chip_data(d)); + void __iomem *pcr_base = port->base + PORT_PCR(d->hwirq); + + vf610_gpio_writel(port->irqc[d->hwirq] << PORT_PCR_IRQC_OFFSET, + pcr_base); +} + +static int vf610_gpio_irq_set_wake(struct irq_data *d, u32 enable) +{ + struct vf610_gpio_port *port = + gpiochip_get_data(irq_data_get_irq_chip_data(d)); + + if (enable) + enable_irq_wake(port->irq); + else + disable_irq_wake(port->irq); + + return 0; +} + +static int vf610_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct vf610_gpio_port *port; + struct resource *iores; + struct gpio_chip *gc; + struct irq_chip *ic; + int i; + int ret; + + port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + port->sdata = of_device_get_match_data(dev); + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + port->base = devm_ioremap_resource(dev, iores); + if (IS_ERR(port->base)) + return PTR_ERR(port->base); + + iores = platform_get_resource(pdev, IORESOURCE_MEM, 1); + port->gpio_base = devm_ioremap_resource(dev, iores); + if (IS_ERR(port->gpio_base)) + return PTR_ERR(port->gpio_base); + + port->irq = platform_get_irq(pdev, 0); + if (port->irq < 0) + return port->irq; + + gc = &port->gc; + gc->of_node = np; + gc->parent = dev; + gc->label = "vf610-gpio"; + gc->ngpio = VF610_GPIO_PER_PORT; + gc->base = of_alias_get_id(np, "gpio") * VF610_GPIO_PER_PORT; + + gc->request = gpiochip_generic_request; + gc->free = gpiochip_generic_free; + gc->direction_input = vf610_gpio_direction_input; + gc->get = vf610_gpio_get; + gc->direction_output = vf610_gpio_direction_output; + gc->set = vf610_gpio_set; + + ic = &port->ic; + ic->name = "gpio-vf610"; + ic->irq_ack = vf610_gpio_irq_ack; + ic->irq_mask = vf610_gpio_irq_mask; + ic->irq_unmask = vf610_gpio_irq_unmask; + ic->irq_set_type = vf610_gpio_irq_set_type; + ic->irq_set_wake = vf610_gpio_irq_set_wake; + + ret = gpiochip_add_data(gc, port); + if (ret < 0) + return ret; + + /* Mask all GPIO interrupts */ + for (i = 0; i < gc->ngpio; i++) + vf610_gpio_writel(0, port->base + PORT_PCR(i)); + + /* Clear the interrupt status register for all GPIO's */ + vf610_gpio_writel(~0, port->base + PORT_ISFR); + + ret = gpiochip_irqchip_add(gc, ic, 0, handle_edge_irq, IRQ_TYPE_NONE); + if (ret) { + dev_err(dev, "failed to add irqchip\n"); + gpiochip_remove(gc); + return ret; + } + gpiochip_set_chained_irqchip(gc, ic, port->irq, + vf610_gpio_irq_handler); + + return 0; +} + +static struct platform_driver vf610_gpio_driver = { + .driver = { + .name = "gpio-vf610", + .of_match_table = vf610_gpio_dt_ids, + }, + .probe = vf610_gpio_probe, +}; + +builtin_platform_driver(vf610_gpio_driver); diff --git a/drivers/gpio/gpio-viperboard.c b/drivers/gpio/gpio-viperboard.c new file mode 100644 index 000000000..e6d1328dd --- /dev/null +++ b/drivers/gpio/gpio-viperboard.c @@ -0,0 +1,485 @@ +/* + * Nano River Technologies viperboard GPIO lib driver + * + * (C) 2012 by Lemonage GmbH + * Author: Lars Poeschel <poeschel@lemonage.de> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> + +#include <linux/usb.h> +#include <linux/gpio.h> + +#include <linux/mfd/viperboard.h> + +#define VPRBRD_GPIOA_CLK_1MHZ 0 +#define VPRBRD_GPIOA_CLK_100KHZ 1 +#define VPRBRD_GPIOA_CLK_10KHZ 2 +#define VPRBRD_GPIOA_CLK_1KHZ 3 +#define VPRBRD_GPIOA_CLK_100HZ 4 +#define VPRBRD_GPIOA_CLK_10HZ 5 + +#define VPRBRD_GPIOA_FREQ_DEFAULT 1000 + +#define VPRBRD_GPIOA_CMD_CONT 0x00 +#define VPRBRD_GPIOA_CMD_PULSE 0x01 +#define VPRBRD_GPIOA_CMD_PWM 0x02 +#define VPRBRD_GPIOA_CMD_SETOUT 0x03 +#define VPRBRD_GPIOA_CMD_SETIN 0x04 +#define VPRBRD_GPIOA_CMD_SETINT 0x05 +#define VPRBRD_GPIOA_CMD_GETIN 0x06 + +#define VPRBRD_GPIOB_CMD_SETDIR 0x00 +#define VPRBRD_GPIOB_CMD_SETVAL 0x01 + +struct vprbrd_gpioa_msg { + u8 cmd; + u8 clk; + u8 offset; + u8 t1; + u8 t2; + u8 invert; + u8 pwmlevel; + u8 outval; + u8 risefall; + u8 answer; + u8 __fill; +} __packed; + +struct vprbrd_gpiob_msg { + u8 cmd; + u16 val; + u16 mask; +} __packed; + +struct vprbrd_gpio { + struct gpio_chip gpioa; /* gpio a related things */ + u32 gpioa_out; + u32 gpioa_val; + struct gpio_chip gpiob; /* gpio b related things */ + u32 gpiob_out; + u32 gpiob_val; + struct vprbrd *vb; +}; + +/* gpioa sampling clock module parameter */ +static unsigned char gpioa_clk; +static unsigned int gpioa_freq = VPRBRD_GPIOA_FREQ_DEFAULT; +module_param(gpioa_freq, uint, 0); +MODULE_PARM_DESC(gpioa_freq, + "gpio-a sampling freq in Hz (default is 1000Hz) valid values: 10, 100, 1000, 10000, 100000, 1000000"); + +/* ----- begin of gipo a chip -------------------------------------------- */ + +static int vprbrd_gpioa_get(struct gpio_chip *chip, + unsigned offset) +{ + int ret, answer, error = 0; + struct vprbrd_gpio *gpio = gpiochip_get_data(chip); + struct vprbrd *vb = gpio->vb; + struct vprbrd_gpioa_msg *gamsg = (struct vprbrd_gpioa_msg *)vb->buf; + + /* if io is set to output, just return the saved value */ + if (gpio->gpioa_out & (1 << offset)) + return !!(gpio->gpioa_val & (1 << offset)); + + mutex_lock(&vb->lock); + + gamsg->cmd = VPRBRD_GPIOA_CMD_GETIN; + gamsg->clk = 0x00; + gamsg->offset = offset; + gamsg->t1 = 0x00; + gamsg->t2 = 0x00; + gamsg->invert = 0x00; + gamsg->pwmlevel = 0x00; + gamsg->outval = 0x00; + gamsg->risefall = 0x00; + gamsg->answer = 0x00; + gamsg->__fill = 0x00; + + ret = usb_control_msg(vb->usb_dev, usb_sndctrlpipe(vb->usb_dev, 0), + VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_OUT, 0x0000, + 0x0000, gamsg, sizeof(struct vprbrd_gpioa_msg), + VPRBRD_USB_TIMEOUT_MS); + if (ret != sizeof(struct vprbrd_gpioa_msg)) + error = -EREMOTEIO; + + ret = usb_control_msg(vb->usb_dev, usb_rcvctrlpipe(vb->usb_dev, 0), + VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_IN, 0x0000, + 0x0000, gamsg, sizeof(struct vprbrd_gpioa_msg), + VPRBRD_USB_TIMEOUT_MS); + answer = gamsg->answer & 0x01; + + mutex_unlock(&vb->lock); + + if (ret != sizeof(struct vprbrd_gpioa_msg)) + error = -EREMOTEIO; + + if (error) + return error; + + return answer; +} + +static void vprbrd_gpioa_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + int ret; + struct vprbrd_gpio *gpio = gpiochip_get_data(chip); + struct vprbrd *vb = gpio->vb; + struct vprbrd_gpioa_msg *gamsg = (struct vprbrd_gpioa_msg *)vb->buf; + + if (gpio->gpioa_out & (1 << offset)) { + if (value) + gpio->gpioa_val |= (1 << offset); + else + gpio->gpioa_val &= ~(1 << offset); + + mutex_lock(&vb->lock); + + gamsg->cmd = VPRBRD_GPIOA_CMD_SETOUT; + gamsg->clk = 0x00; + gamsg->offset = offset; + gamsg->t1 = 0x00; + gamsg->t2 = 0x00; + gamsg->invert = 0x00; + gamsg->pwmlevel = 0x00; + gamsg->outval = value; + gamsg->risefall = 0x00; + gamsg->answer = 0x00; + gamsg->__fill = 0x00; + + ret = usb_control_msg(vb->usb_dev, + usb_sndctrlpipe(vb->usb_dev, 0), + VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_OUT, + 0x0000, 0x0000, gamsg, + sizeof(struct vprbrd_gpioa_msg), VPRBRD_USB_TIMEOUT_MS); + + mutex_unlock(&vb->lock); + + if (ret != sizeof(struct vprbrd_gpioa_msg)) + dev_err(chip->parent, "usb error setting pin value\n"); + } +} + +static int vprbrd_gpioa_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + int ret; + struct vprbrd_gpio *gpio = gpiochip_get_data(chip); + struct vprbrd *vb = gpio->vb; + struct vprbrd_gpioa_msg *gamsg = (struct vprbrd_gpioa_msg *)vb->buf; + + gpio->gpioa_out &= ~(1 << offset); + + mutex_lock(&vb->lock); + + gamsg->cmd = VPRBRD_GPIOA_CMD_SETIN; + gamsg->clk = gpioa_clk; + gamsg->offset = offset; + gamsg->t1 = 0x00; + gamsg->t2 = 0x00; + gamsg->invert = 0x00; + gamsg->pwmlevel = 0x00; + gamsg->outval = 0x00; + gamsg->risefall = 0x00; + gamsg->answer = 0x00; + gamsg->__fill = 0x00; + + ret = usb_control_msg(vb->usb_dev, usb_sndctrlpipe(vb->usb_dev, 0), + VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_OUT, 0x0000, + 0x0000, gamsg, sizeof(struct vprbrd_gpioa_msg), + VPRBRD_USB_TIMEOUT_MS); + + mutex_unlock(&vb->lock); + + if (ret != sizeof(struct vprbrd_gpioa_msg)) + return -EREMOTEIO; + + return 0; +} + +static int vprbrd_gpioa_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + int ret; + struct vprbrd_gpio *gpio = gpiochip_get_data(chip); + struct vprbrd *vb = gpio->vb; + struct vprbrd_gpioa_msg *gamsg = (struct vprbrd_gpioa_msg *)vb->buf; + + gpio->gpioa_out |= (1 << offset); + if (value) + gpio->gpioa_val |= (1 << offset); + else + gpio->gpioa_val &= ~(1 << offset); + + mutex_lock(&vb->lock); + + gamsg->cmd = VPRBRD_GPIOA_CMD_SETOUT; + gamsg->clk = 0x00; + gamsg->offset = offset; + gamsg->t1 = 0x00; + gamsg->t2 = 0x00; + gamsg->invert = 0x00; + gamsg->pwmlevel = 0x00; + gamsg->outval = value; + gamsg->risefall = 0x00; + gamsg->answer = 0x00; + gamsg->__fill = 0x00; + + ret = usb_control_msg(vb->usb_dev, usb_sndctrlpipe(vb->usb_dev, 0), + VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_OUT, 0x0000, + 0x0000, gamsg, sizeof(struct vprbrd_gpioa_msg), + VPRBRD_USB_TIMEOUT_MS); + + mutex_unlock(&vb->lock); + + if (ret != sizeof(struct vprbrd_gpioa_msg)) + return -EREMOTEIO; + + return 0; +} + +/* ----- end of gpio a chip ---------------------------------------------- */ + +/* ----- begin of gipo b chip -------------------------------------------- */ + +static int vprbrd_gpiob_setdir(struct vprbrd *vb, unsigned offset, + unsigned dir) +{ + struct vprbrd_gpiob_msg *gbmsg = (struct vprbrd_gpiob_msg *)vb->buf; + int ret; + + gbmsg->cmd = VPRBRD_GPIOB_CMD_SETDIR; + gbmsg->val = cpu_to_be16(dir << offset); + gbmsg->mask = cpu_to_be16(0x0001 << offset); + + ret = usb_control_msg(vb->usb_dev, usb_sndctrlpipe(vb->usb_dev, 0), + VPRBRD_USB_REQUEST_GPIOB, VPRBRD_USB_TYPE_OUT, 0x0000, + 0x0000, gbmsg, sizeof(struct vprbrd_gpiob_msg), + VPRBRD_USB_TIMEOUT_MS); + + if (ret != sizeof(struct vprbrd_gpiob_msg)) + return -EREMOTEIO; + + return 0; +} + +static int vprbrd_gpiob_get(struct gpio_chip *chip, + unsigned offset) +{ + int ret; + u16 val; + struct vprbrd_gpio *gpio = gpiochip_get_data(chip); + struct vprbrd *vb = gpio->vb; + struct vprbrd_gpiob_msg *gbmsg = (struct vprbrd_gpiob_msg *)vb->buf; + + /* if io is set to output, just return the saved value */ + if (gpio->gpiob_out & (1 << offset)) + return gpio->gpiob_val & (1 << offset); + + mutex_lock(&vb->lock); + + ret = usb_control_msg(vb->usb_dev, usb_rcvctrlpipe(vb->usb_dev, 0), + VPRBRD_USB_REQUEST_GPIOB, VPRBRD_USB_TYPE_IN, 0x0000, + 0x0000, gbmsg, sizeof(struct vprbrd_gpiob_msg), + VPRBRD_USB_TIMEOUT_MS); + val = gbmsg->val; + + mutex_unlock(&vb->lock); + + if (ret != sizeof(struct vprbrd_gpiob_msg)) + return ret; + + /* cache the read values */ + gpio->gpiob_val = be16_to_cpu(val); + + return (gpio->gpiob_val >> offset) & 0x1; +} + +static void vprbrd_gpiob_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + int ret; + struct vprbrd_gpio *gpio = gpiochip_get_data(chip); + struct vprbrd *vb = gpio->vb; + struct vprbrd_gpiob_msg *gbmsg = (struct vprbrd_gpiob_msg *)vb->buf; + + if (gpio->gpiob_out & (1 << offset)) { + if (value) + gpio->gpiob_val |= (1 << offset); + else + gpio->gpiob_val &= ~(1 << offset); + + mutex_lock(&vb->lock); + + gbmsg->cmd = VPRBRD_GPIOB_CMD_SETVAL; + gbmsg->val = cpu_to_be16(value << offset); + gbmsg->mask = cpu_to_be16(0x0001 << offset); + + ret = usb_control_msg(vb->usb_dev, + usb_sndctrlpipe(vb->usb_dev, 0), + VPRBRD_USB_REQUEST_GPIOB, VPRBRD_USB_TYPE_OUT, + 0x0000, 0x0000, gbmsg, + sizeof(struct vprbrd_gpiob_msg), VPRBRD_USB_TIMEOUT_MS); + + mutex_unlock(&vb->lock); + + if (ret != sizeof(struct vprbrd_gpiob_msg)) + dev_err(chip->parent, "usb error setting pin value\n"); + } +} + +static int vprbrd_gpiob_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + int ret; + struct vprbrd_gpio *gpio = gpiochip_get_data(chip); + struct vprbrd *vb = gpio->vb; + + gpio->gpiob_out &= ~(1 << offset); + + mutex_lock(&vb->lock); + + ret = vprbrd_gpiob_setdir(vb, offset, 0); + + mutex_unlock(&vb->lock); + + if (ret) + dev_err(chip->parent, "usb error setting pin to input\n"); + + return ret; +} + +static int vprbrd_gpiob_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + int ret; + struct vprbrd_gpio *gpio = gpiochip_get_data(chip); + struct vprbrd *vb = gpio->vb; + + gpio->gpiob_out |= (1 << offset); + + mutex_lock(&vb->lock); + + ret = vprbrd_gpiob_setdir(vb, offset, 1); + if (ret) + dev_err(chip->parent, "usb error setting pin to output\n"); + + mutex_unlock(&vb->lock); + + vprbrd_gpiob_set(chip, offset, value); + + return ret; +} + +/* ----- end of gpio b chip ---------------------------------------------- */ + +static int vprbrd_gpio_probe(struct platform_device *pdev) +{ + struct vprbrd *vb = dev_get_drvdata(pdev->dev.parent); + struct vprbrd_gpio *vb_gpio; + int ret; + + vb_gpio = devm_kzalloc(&pdev->dev, sizeof(*vb_gpio), GFP_KERNEL); + if (vb_gpio == NULL) + return -ENOMEM; + + vb_gpio->vb = vb; + /* registering gpio a */ + vb_gpio->gpioa.label = "viperboard gpio a"; + vb_gpio->gpioa.parent = &pdev->dev; + vb_gpio->gpioa.owner = THIS_MODULE; + vb_gpio->gpioa.base = -1; + vb_gpio->gpioa.ngpio = 16; + vb_gpio->gpioa.can_sleep = true; + vb_gpio->gpioa.set = vprbrd_gpioa_set; + vb_gpio->gpioa.get = vprbrd_gpioa_get; + vb_gpio->gpioa.direction_input = vprbrd_gpioa_direction_input; + vb_gpio->gpioa.direction_output = vprbrd_gpioa_direction_output; + ret = devm_gpiochip_add_data(&pdev->dev, &vb_gpio->gpioa, vb_gpio); + if (ret < 0) { + dev_err(vb_gpio->gpioa.parent, "could not add gpio a"); + return ret; + } + + /* registering gpio b */ + vb_gpio->gpiob.label = "viperboard gpio b"; + vb_gpio->gpiob.parent = &pdev->dev; + vb_gpio->gpiob.owner = THIS_MODULE; + vb_gpio->gpiob.base = -1; + vb_gpio->gpiob.ngpio = 16; + vb_gpio->gpiob.can_sleep = true; + vb_gpio->gpiob.set = vprbrd_gpiob_set; + vb_gpio->gpiob.get = vprbrd_gpiob_get; + vb_gpio->gpiob.direction_input = vprbrd_gpiob_direction_input; + vb_gpio->gpiob.direction_output = vprbrd_gpiob_direction_output; + ret = devm_gpiochip_add_data(&pdev->dev, &vb_gpio->gpiob, vb_gpio); + if (ret < 0) { + dev_err(vb_gpio->gpiob.parent, "could not add gpio b"); + return ret; + } + + platform_set_drvdata(pdev, vb_gpio); + + return ret; +} + +static struct platform_driver vprbrd_gpio_driver = { + .driver.name = "viperboard-gpio", + .probe = vprbrd_gpio_probe, +}; + +static int __init vprbrd_gpio_init(void) +{ + switch (gpioa_freq) { + case 1000000: + gpioa_clk = VPRBRD_GPIOA_CLK_1MHZ; + break; + case 100000: + gpioa_clk = VPRBRD_GPIOA_CLK_100KHZ; + break; + case 10000: + gpioa_clk = VPRBRD_GPIOA_CLK_10KHZ; + break; + case 1000: + gpioa_clk = VPRBRD_GPIOA_CLK_1KHZ; + break; + case 100: + gpioa_clk = VPRBRD_GPIOA_CLK_100HZ; + break; + case 10: + gpioa_clk = VPRBRD_GPIOA_CLK_10HZ; + break; + default: + pr_warn("invalid gpioa_freq (%d)\n", gpioa_freq); + gpioa_clk = VPRBRD_GPIOA_CLK_1KHZ; + } + + return platform_driver_register(&vprbrd_gpio_driver); +} +subsys_initcall(vprbrd_gpio_init); + +static void __exit vprbrd_gpio_exit(void) +{ + platform_driver_unregister(&vprbrd_gpio_driver); +} +module_exit(vprbrd_gpio_exit); + +MODULE_AUTHOR("Lars Poeschel <poeschel@lemonage.de>"); +MODULE_DESCRIPTION("GPIO driver for Nano River Techs Viperboard"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:viperboard-gpio"); diff --git a/drivers/gpio/gpio-vr41xx.c b/drivers/gpio/gpio-vr41xx.c new file mode 100644 index 000000000..027699cec --- /dev/null +++ b/drivers/gpio/gpio-vr41xx.c @@ -0,0 +1,603 @@ +/* + * Driver for NEC VR4100 series General-purpose I/O Unit. + * + * Copyright (C) 2002 MontaVista Software Inc. + * Author: Yoichi Yuasa <source@mvista.com> + * Copyright (C) 2003-2009 Yoichi Yuasa <yuasa@linux-mips.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#include <asm/vr41xx/giu.h> +#include <asm/vr41xx/irq.h> +#include <asm/vr41xx/vr41xx.h> + +MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>"); +MODULE_DESCRIPTION("NEC VR4100 series General-purpose I/O Unit driver"); +MODULE_LICENSE("GPL"); + +#define GIUIOSELL 0x00 +#define GIUIOSELH 0x02 +#define GIUPIODL 0x04 +#define GIUPIODH 0x06 +#define GIUINTSTATL 0x08 +#define GIUINTSTATH 0x0a +#define GIUINTENL 0x0c +#define GIUINTENH 0x0e +#define GIUINTTYPL 0x10 +#define GIUINTTYPH 0x12 +#define GIUINTALSELL 0x14 +#define GIUINTALSELH 0x16 +#define GIUINTHTSELL 0x18 +#define GIUINTHTSELH 0x1a +#define GIUPODATL 0x1c +#define GIUPODATEN 0x1c +#define GIUPODATH 0x1e + #define PIOEN0 0x0100 + #define PIOEN1 0x0200 +#define GIUPODAT 0x1e +#define GIUFEDGEINHL 0x20 +#define GIUFEDGEINHH 0x22 +#define GIUREDGEINHL 0x24 +#define GIUREDGEINHH 0x26 + +#define GIUUSEUPDN 0x1e0 +#define GIUTERMUPDN 0x1e2 + +#define GPIO_HAS_PULLUPDOWN_IO 0x0001 +#define GPIO_HAS_OUTPUT_ENABLE 0x0002 +#define GPIO_HAS_INTERRUPT_EDGE_SELECT 0x0100 + +enum { + GPIO_INPUT, + GPIO_OUTPUT, +}; + +static DEFINE_SPINLOCK(giu_lock); +static unsigned long giu_flags; + +static void __iomem *giu_base; +static struct gpio_chip vr41xx_gpio_chip; + +#define giu_read(offset) readw(giu_base + (offset)) +#define giu_write(offset, value) writew((value), giu_base + (offset)) + +#define GPIO_PIN_OF_IRQ(irq) ((irq) - GIU_IRQ_BASE) +#define GIUINT_HIGH_OFFSET 16 +#define GIUINT_HIGH_MAX 32 + +static inline u16 giu_set(u16 offset, u16 set) +{ + u16 data; + + data = giu_read(offset); + data |= set; + giu_write(offset, data); + + return data; +} + +static inline u16 giu_clear(u16 offset, u16 clear) +{ + u16 data; + + data = giu_read(offset); + data &= ~clear; + giu_write(offset, data); + + return data; +} + +static void ack_giuint_low(struct irq_data *d) +{ + giu_write(GIUINTSTATL, 1 << GPIO_PIN_OF_IRQ(d->irq)); +} + +static void mask_giuint_low(struct irq_data *d) +{ + giu_clear(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(d->irq)); +} + +static void mask_ack_giuint_low(struct irq_data *d) +{ + unsigned int pin; + + pin = GPIO_PIN_OF_IRQ(d->irq); + giu_clear(GIUINTENL, 1 << pin); + giu_write(GIUINTSTATL, 1 << pin); +} + +static void unmask_giuint_low(struct irq_data *d) +{ + giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(d->irq)); +} + +static unsigned int startup_giuint(struct irq_data *data) +{ + int ret; + + ret = gpiochip_lock_as_irq(&vr41xx_gpio_chip, irqd_to_hwirq(data)); + if (ret) { + dev_err(vr41xx_gpio_chip.parent, + "unable to lock HW IRQ %lu for IRQ\n", + data->hwirq); + return ret; + } + + /* Satisfy the .enable semantics by unmasking the line */ + unmask_giuint_low(data); + return 0; +} + +static void shutdown_giuint(struct irq_data *data) +{ + mask_giuint_low(data); + gpiochip_unlock_as_irq(&vr41xx_gpio_chip, data->hwirq); +} + +static struct irq_chip giuint_low_irq_chip = { + .name = "GIUINTL", + .irq_ack = ack_giuint_low, + .irq_mask = mask_giuint_low, + .irq_mask_ack = mask_ack_giuint_low, + .irq_unmask = unmask_giuint_low, + .irq_startup = startup_giuint, + .irq_shutdown = shutdown_giuint, +}; + +static void ack_giuint_high(struct irq_data *d) +{ + giu_write(GIUINTSTATH, + 1 << (GPIO_PIN_OF_IRQ(d->irq) - GIUINT_HIGH_OFFSET)); +} + +static void mask_giuint_high(struct irq_data *d) +{ + giu_clear(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(d->irq) - GIUINT_HIGH_OFFSET)); +} + +static void mask_ack_giuint_high(struct irq_data *d) +{ + unsigned int pin; + + pin = GPIO_PIN_OF_IRQ(d->irq) - GIUINT_HIGH_OFFSET; + giu_clear(GIUINTENH, 1 << pin); + giu_write(GIUINTSTATH, 1 << pin); +} + +static void unmask_giuint_high(struct irq_data *d) +{ + giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(d->irq) - GIUINT_HIGH_OFFSET)); +} + +static struct irq_chip giuint_high_irq_chip = { + .name = "GIUINTH", + .irq_ack = ack_giuint_high, + .irq_mask = mask_giuint_high, + .irq_mask_ack = mask_ack_giuint_high, + .irq_unmask = unmask_giuint_high, +}; + +static int giu_get_irq(unsigned int irq) +{ + u16 pendl, pendh, maskl, maskh; + int i; + + pendl = giu_read(GIUINTSTATL); + pendh = giu_read(GIUINTSTATH); + maskl = giu_read(GIUINTENL); + maskh = giu_read(GIUINTENH); + + maskl &= pendl; + maskh &= pendh; + + if (maskl) { + for (i = 0; i < 16; i++) { + if (maskl & (1 << i)) + return GIU_IRQ(i); + } + } else if (maskh) { + for (i = 0; i < 16; i++) { + if (maskh & (1 << i)) + return GIU_IRQ(i + GIUINT_HIGH_OFFSET); + } + } + + printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n", + maskl, pendl, maskh, pendh); + + atomic_inc(&irq_err_count); + + return -EINVAL; +} + +void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, + irq_signal_t signal) +{ + u16 mask; + + if (pin < GIUINT_HIGH_OFFSET) { + mask = 1 << pin; + if (trigger != IRQ_TRIGGER_LEVEL) { + giu_set(GIUINTTYPL, mask); + if (signal == IRQ_SIGNAL_HOLD) + giu_set(GIUINTHTSELL, mask); + else + giu_clear(GIUINTHTSELL, mask); + if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) { + switch (trigger) { + case IRQ_TRIGGER_EDGE_FALLING: + giu_set(GIUFEDGEINHL, mask); + giu_clear(GIUREDGEINHL, mask); + break; + case IRQ_TRIGGER_EDGE_RISING: + giu_clear(GIUFEDGEINHL, mask); + giu_set(GIUREDGEINHL, mask); + break; + default: + giu_set(GIUFEDGEINHL, mask); + giu_set(GIUREDGEINHL, mask); + break; + } + } + irq_set_chip_and_handler(GIU_IRQ(pin), + &giuint_low_irq_chip, + handle_edge_irq); + } else { + giu_clear(GIUINTTYPL, mask); + giu_clear(GIUINTHTSELL, mask); + irq_set_chip_and_handler(GIU_IRQ(pin), + &giuint_low_irq_chip, + handle_level_irq); + } + giu_write(GIUINTSTATL, mask); + } else if (pin < GIUINT_HIGH_MAX) { + mask = 1 << (pin - GIUINT_HIGH_OFFSET); + if (trigger != IRQ_TRIGGER_LEVEL) { + giu_set(GIUINTTYPH, mask); + if (signal == IRQ_SIGNAL_HOLD) + giu_set(GIUINTHTSELH, mask); + else + giu_clear(GIUINTHTSELH, mask); + if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) { + switch (trigger) { + case IRQ_TRIGGER_EDGE_FALLING: + giu_set(GIUFEDGEINHH, mask); + giu_clear(GIUREDGEINHH, mask); + break; + case IRQ_TRIGGER_EDGE_RISING: + giu_clear(GIUFEDGEINHH, mask); + giu_set(GIUREDGEINHH, mask); + break; + default: + giu_set(GIUFEDGEINHH, mask); + giu_set(GIUREDGEINHH, mask); + break; + } + } + irq_set_chip_and_handler(GIU_IRQ(pin), + &giuint_high_irq_chip, + handle_edge_irq); + } else { + giu_clear(GIUINTTYPH, mask); + giu_clear(GIUINTHTSELH, mask); + irq_set_chip_and_handler(GIU_IRQ(pin), + &giuint_high_irq_chip, + handle_level_irq); + } + giu_write(GIUINTSTATH, mask); + } +} +EXPORT_SYMBOL_GPL(vr41xx_set_irq_trigger); + +void vr41xx_set_irq_level(unsigned int pin, irq_level_t level) +{ + u16 mask; + + if (pin < GIUINT_HIGH_OFFSET) { + mask = 1 << pin; + if (level == IRQ_LEVEL_HIGH) + giu_set(GIUINTALSELL, mask); + else + giu_clear(GIUINTALSELL, mask); + giu_write(GIUINTSTATL, mask); + } else if (pin < GIUINT_HIGH_MAX) { + mask = 1 << (pin - GIUINT_HIGH_OFFSET); + if (level == IRQ_LEVEL_HIGH) + giu_set(GIUINTALSELH, mask); + else + giu_clear(GIUINTALSELH, mask); + giu_write(GIUINTSTATH, mask); + } +} +EXPORT_SYMBOL_GPL(vr41xx_set_irq_level); + +static int giu_set_direction(struct gpio_chip *chip, unsigned pin, int dir) +{ + u16 offset, mask, reg; + unsigned long flags; + + if (pin >= chip->ngpio) + return -EINVAL; + + if (pin < 16) { + offset = GIUIOSELL; + mask = 1 << pin; + } else if (pin < 32) { + offset = GIUIOSELH; + mask = 1 << (pin - 16); + } else { + if (giu_flags & GPIO_HAS_OUTPUT_ENABLE) { + offset = GIUPODATEN; + mask = 1 << (pin - 32); + } else { + switch (pin) { + case 48: + offset = GIUPODATH; + mask = PIOEN0; + break; + case 49: + offset = GIUPODATH; + mask = PIOEN1; + break; + default: + return -EINVAL; + } + } + } + + spin_lock_irqsave(&giu_lock, flags); + + reg = giu_read(offset); + if (dir == GPIO_OUTPUT) + reg |= mask; + else + reg &= ~mask; + giu_write(offset, reg); + + spin_unlock_irqrestore(&giu_lock, flags); + + return 0; +} + +int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull) +{ + u16 reg, mask; + unsigned long flags; + + if ((giu_flags & GPIO_HAS_PULLUPDOWN_IO) != GPIO_HAS_PULLUPDOWN_IO) + return -EPERM; + + if (pin >= 15) + return -EINVAL; + + mask = 1 << pin; + + spin_lock_irqsave(&giu_lock, flags); + + if (pull == GPIO_PULL_UP || pull == GPIO_PULL_DOWN) { + reg = giu_read(GIUTERMUPDN); + if (pull == GPIO_PULL_UP) + reg |= mask; + else + reg &= ~mask; + giu_write(GIUTERMUPDN, reg); + + reg = giu_read(GIUUSEUPDN); + reg |= mask; + giu_write(GIUUSEUPDN, reg); + } else { + reg = giu_read(GIUUSEUPDN); + reg &= ~mask; + giu_write(GIUUSEUPDN, reg); + } + + spin_unlock_irqrestore(&giu_lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(vr41xx_gpio_pullupdown); + +static int vr41xx_gpio_get(struct gpio_chip *chip, unsigned pin) +{ + u16 reg, mask; + + if (pin >= chip->ngpio) + return -EINVAL; + + if (pin < 16) { + reg = giu_read(GIUPIODL); + mask = 1 << pin; + } else if (pin < 32) { + reg = giu_read(GIUPIODH); + mask = 1 << (pin - 16); + } else if (pin < 48) { + reg = giu_read(GIUPODATL); + mask = 1 << (pin - 32); + } else { + reg = giu_read(GIUPODATH); + mask = 1 << (pin - 48); + } + + if (reg & mask) + return 1; + + return 0; +} + +static void vr41xx_gpio_set(struct gpio_chip *chip, unsigned pin, + int value) +{ + u16 offset, mask, reg; + unsigned long flags; + + if (pin >= chip->ngpio) + return; + + if (pin < 16) { + offset = GIUPIODL; + mask = 1 << pin; + } else if (pin < 32) { + offset = GIUPIODH; + mask = 1 << (pin - 16); + } else if (pin < 48) { + offset = GIUPODATL; + mask = 1 << (pin - 32); + } else { + offset = GIUPODATH; + mask = 1 << (pin - 48); + } + + spin_lock_irqsave(&giu_lock, flags); + + reg = giu_read(offset); + if (value) + reg |= mask; + else + reg &= ~mask; + giu_write(offset, reg); + + spin_unlock_irqrestore(&giu_lock, flags); +} + + +static int vr41xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return giu_set_direction(chip, offset, GPIO_INPUT); +} + +static int vr41xx_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + vr41xx_gpio_set(chip, offset, value); + + return giu_set_direction(chip, offset, GPIO_OUTPUT); +} + +static int vr41xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + if (offset >= chip->ngpio) + return -EINVAL; + + return GIU_IRQ_BASE + offset; +} + +static struct gpio_chip vr41xx_gpio_chip = { + .label = "vr41xx", + .owner = THIS_MODULE, + .direction_input = vr41xx_gpio_direction_input, + .get = vr41xx_gpio_get, + .direction_output = vr41xx_gpio_direction_output, + .set = vr41xx_gpio_set, + .to_irq = vr41xx_gpio_to_irq, +}; + +static int giu_probe(struct platform_device *pdev) +{ + struct resource *res; + unsigned int trigger, i, pin; + struct irq_chip *chip; + int irq, ret; + + switch (pdev->id) { + case GPIO_50PINS_PULLUPDOWN: + giu_flags = GPIO_HAS_PULLUPDOWN_IO; + vr41xx_gpio_chip.ngpio = 50; + break; + case GPIO_36PINS: + vr41xx_gpio_chip.ngpio = 36; + break; + case GPIO_48PINS_EDGE_SELECT: + giu_flags = GPIO_HAS_INTERRUPT_EDGE_SELECT; + vr41xx_gpio_chip.ngpio = 48; + break; + default: + dev_err(&pdev->dev, "GIU: unknown ID %d\n", pdev->id); + return -ENODEV; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EBUSY; + + giu_base = ioremap(res->start, resource_size(res)); + if (!giu_base) + return -ENOMEM; + + vr41xx_gpio_chip.parent = &pdev->dev; + + ret = gpiochip_add_data(&vr41xx_gpio_chip, NULL); + if (!ret) { + iounmap(giu_base); + return -ENODEV; + } + + giu_write(GIUINTENL, 0); + giu_write(GIUINTENH, 0); + + trigger = giu_read(GIUINTTYPH) << 16; + trigger |= giu_read(GIUINTTYPL); + for (i = GIU_IRQ_BASE; i <= GIU_IRQ_LAST; i++) { + pin = GPIO_PIN_OF_IRQ(i); + if (pin < GIUINT_HIGH_OFFSET) + chip = &giuint_low_irq_chip; + else + chip = &giuint_high_irq_chip; + + if (trigger & (1 << pin)) + irq_set_chip_and_handler(i, chip, handle_edge_irq); + else + irq_set_chip_and_handler(i, chip, handle_level_irq); + + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0 || irq >= nr_irqs) + return -EBUSY; + + return cascade_irq(irq, giu_get_irq); +} + +static int giu_remove(struct platform_device *pdev) +{ + if (giu_base) { + iounmap(giu_base); + giu_base = NULL; + } + + return 0; +} + +static struct platform_driver giu_device_driver = { + .probe = giu_probe, + .remove = giu_remove, + .driver = { + .name = "GIU", + }, +}; + +module_platform_driver(giu_device_driver); diff --git a/drivers/gpio/gpio-vx855.c b/drivers/gpio/gpio-vx855.c new file mode 100644 index 000000000..98a6f1fcc --- /dev/null +++ b/drivers/gpio/gpio-vx855.c @@ -0,0 +1,301 @@ +/* + * Linux GPIOlib driver for the VIA VX855 integrated southbridge GPIO + * + * Copyright (C) 2009 VIA Technologies, Inc. + * Copyright (C) 2010 One Laptop per Child + * Author: Harald Welte <HaraldWelte@viatech.com> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/io.h> + +#define MODULE_NAME "vx855_gpio" + +/* The VX855 south bridge has the following GPIO pins: + * GPI 0...13 General Purpose Input + * GPO 0...12 General Purpose Output + * GPIO 0...14 General Purpose I/O (Open-Drain) + */ + +#define NR_VX855_GPI 14 +#define NR_VX855_GPO 13 +#define NR_VX855_GPIO 15 + +#define NR_VX855_GPInO (NR_VX855_GPI + NR_VX855_GPO) +#define NR_VX855_GP (NR_VX855_GPI + NR_VX855_GPO + NR_VX855_GPIO) + +struct vx855_gpio { + struct gpio_chip gpio; + spinlock_t lock; + u32 io_gpi; + u32 io_gpo; +}; + +/* resolve a GPIx into the corresponding bit position */ +static inline u_int32_t gpi_i_bit(int i) +{ + if (i < 10) + return 1 << i; + else + return 1 << (i + 14); +} + +static inline u_int32_t gpo_o_bit(int i) +{ + if (i < 11) + return 1 << i; + else + return 1 << (i + 14); +} + +static inline u_int32_t gpio_i_bit(int i) +{ + if (i < 14) + return 1 << (i + 10); + else + return 1 << (i + 14); +} + +static inline u_int32_t gpio_o_bit(int i) +{ + if (i < 14) + return 1 << (i + 11); + else + return 1 << (i + 13); +} + +/* Mapping betwee numeric GPIO ID and the actual GPIO hardware numbering: + * 0..13 GPI 0..13 + * 14..26 GPO 0..12 + * 27..41 GPIO 0..14 + */ + +static int vx855gpio_direction_input(struct gpio_chip *gpio, + unsigned int nr) +{ + struct vx855_gpio *vg = gpiochip_get_data(gpio); + unsigned long flags; + u_int32_t reg_out; + + /* Real GPI bits are always in input direction */ + if (nr < NR_VX855_GPI) + return 0; + + /* Real GPO bits cannot be put in output direction */ + if (nr < NR_VX855_GPInO) + return -EINVAL; + + /* Open Drain GPIO have to be set to one */ + spin_lock_irqsave(&vg->lock, flags); + reg_out = inl(vg->io_gpo); + reg_out |= gpio_o_bit(nr - NR_VX855_GPInO); + outl(reg_out, vg->io_gpo); + spin_unlock_irqrestore(&vg->lock, flags); + + return 0; +} + +static int vx855gpio_get(struct gpio_chip *gpio, unsigned int nr) +{ + struct vx855_gpio *vg = gpiochip_get_data(gpio); + u_int32_t reg_in; + int ret = 0; + + if (nr < NR_VX855_GPI) { + reg_in = inl(vg->io_gpi); + if (reg_in & gpi_i_bit(nr)) + ret = 1; + } else if (nr < NR_VX855_GPInO) { + /* GPO don't have an input bit, we need to read it + * back from the output register */ + reg_in = inl(vg->io_gpo); + if (reg_in & gpo_o_bit(nr - NR_VX855_GPI)) + ret = 1; + } else { + reg_in = inl(vg->io_gpi); + if (reg_in & gpio_i_bit(nr - NR_VX855_GPInO)) + ret = 1; + } + + return ret; +} + +static void vx855gpio_set(struct gpio_chip *gpio, unsigned int nr, + int val) +{ + struct vx855_gpio *vg = gpiochip_get_data(gpio); + unsigned long flags; + u_int32_t reg_out; + + /* True GPI cannot be switched to output mode */ + if (nr < NR_VX855_GPI) + return; + + spin_lock_irqsave(&vg->lock, flags); + reg_out = inl(vg->io_gpo); + if (nr < NR_VX855_GPInO) { + if (val) + reg_out |= gpo_o_bit(nr - NR_VX855_GPI); + else + reg_out &= ~gpo_o_bit(nr - NR_VX855_GPI); + } else { + if (val) + reg_out |= gpio_o_bit(nr - NR_VX855_GPInO); + else + reg_out &= ~gpio_o_bit(nr - NR_VX855_GPInO); + } + outl(reg_out, vg->io_gpo); + spin_unlock_irqrestore(&vg->lock, flags); +} + +static int vx855gpio_direction_output(struct gpio_chip *gpio, + unsigned int nr, int val) +{ + /* True GPI cannot be switched to output mode */ + if (nr < NR_VX855_GPI) + return -EINVAL; + + /* True GPO don't need to be switched to output mode, + * and GPIO are open-drain, i.e. also need no switching, + * so all we do is set the level */ + vx855gpio_set(gpio, nr, val); + + return 0; +} + +static int vx855gpio_set_config(struct gpio_chip *gpio, unsigned int nr, + unsigned long config) +{ + enum pin_config_param param = pinconf_to_config_param(config); + + /* The GPI cannot be single-ended */ + if (nr < NR_VX855_GPI) + return -EINVAL; + + /* The GPO's are push-pull */ + if (nr < NR_VX855_GPInO) { + if (param != PIN_CONFIG_DRIVE_PUSH_PULL) + return -ENOTSUPP; + return 0; + } + + /* The GPIO's are open drain */ + if (param != PIN_CONFIG_DRIVE_OPEN_DRAIN) + return -ENOTSUPP; + + return 0; +} + +static const char *vx855gpio_names[NR_VX855_GP] = { + "VX855_GPI0", "VX855_GPI1", "VX855_GPI2", "VX855_GPI3", "VX855_GPI4", + "VX855_GPI5", "VX855_GPI6", "VX855_GPI7", "VX855_GPI8", "VX855_GPI9", + "VX855_GPI10", "VX855_GPI11", "VX855_GPI12", "VX855_GPI13", + "VX855_GPO0", "VX855_GPO1", "VX855_GPO2", "VX855_GPO3", "VX855_GPO4", + "VX855_GPO5", "VX855_GPO6", "VX855_GPO7", "VX855_GPO8", "VX855_GPO9", + "VX855_GPO10", "VX855_GPO11", "VX855_GPO12", + "VX855_GPIO0", "VX855_GPIO1", "VX855_GPIO2", "VX855_GPIO3", + "VX855_GPIO4", "VX855_GPIO5", "VX855_GPIO6", "VX855_GPIO7", + "VX855_GPIO8", "VX855_GPIO9", "VX855_GPIO10", "VX855_GPIO11", + "VX855_GPIO12", "VX855_GPIO13", "VX855_GPIO14" +}; + +static void vx855gpio_gpio_setup(struct vx855_gpio *vg) +{ + struct gpio_chip *c = &vg->gpio; + + c->label = "VX855 South Bridge"; + c->owner = THIS_MODULE; + c->direction_input = vx855gpio_direction_input; + c->direction_output = vx855gpio_direction_output; + c->get = vx855gpio_get; + c->set = vx855gpio_set; + c->set_config = vx855gpio_set_config, + c->dbg_show = NULL; + c->base = 0; + c->ngpio = NR_VX855_GP; + c->can_sleep = false; + c->names = vx855gpio_names; +} + +/* This platform device is ordinarily registered by the vx855 mfd driver */ +static int vx855gpio_probe(struct platform_device *pdev) +{ + struct resource *res_gpi; + struct resource *res_gpo; + struct vx855_gpio *vg; + + res_gpi = platform_get_resource(pdev, IORESOURCE_IO, 0); + res_gpo = platform_get_resource(pdev, IORESOURCE_IO, 1); + if (!res_gpi || !res_gpo) + return -EBUSY; + + vg = devm_kzalloc(&pdev->dev, sizeof(*vg), GFP_KERNEL); + if (!vg) + return -ENOMEM; + + platform_set_drvdata(pdev, vg); + + dev_info(&pdev->dev, "found VX855 GPIO controller\n"); + vg->io_gpi = res_gpi->start; + vg->io_gpo = res_gpo->start; + spin_lock_init(&vg->lock); + + /* + * A single byte is used to control various GPIO ports on the VX855, + * and in the case of the OLPC XO-1.5, some of those ports are used + * for switches that are interpreted and exposed through ACPI. ACPI + * will have reserved the region, so our own reservation will not + * succeed. Ignore and continue. + */ + + if (!devm_request_region(&pdev->dev, res_gpi->start, + resource_size(res_gpi), MODULE_NAME "_gpi")) + dev_warn(&pdev->dev, + "GPI I/O resource busy, probably claimed by ACPI\n"); + + if (!devm_request_region(&pdev->dev, res_gpo->start, + resource_size(res_gpo), MODULE_NAME "_gpo")) + dev_warn(&pdev->dev, + "GPO I/O resource busy, probably claimed by ACPI\n"); + + vx855gpio_gpio_setup(vg); + + return devm_gpiochip_add_data(&pdev->dev, &vg->gpio, vg); +} + +static struct platform_driver vx855gpio_driver = { + .driver = { + .name = MODULE_NAME, + }, + .probe = vx855gpio_probe, +}; + +module_platform_driver(vx855gpio_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Harald Welte <HaraldWelte@viatech.com>"); +MODULE_DESCRIPTION("GPIO driver for the VIA VX855 chipset"); +MODULE_ALIAS("platform:vx855_gpio"); diff --git a/drivers/gpio/gpio-wcove.c b/drivers/gpio/gpio-wcove.c new file mode 100644 index 000000000..dde7c6aec --- /dev/null +++ b/drivers/gpio/gpio-wcove.c @@ -0,0 +1,512 @@ +/* + * Intel Whiskey Cove PMIC GPIO Driver + * + * This driver is written based on gpio-crystalcove.c + * + * Copyright (C) 2016 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitops.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/gpio/driver.h> +#include <linux/mfd/intel_soc_pmic.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/seq_file.h> + +/* + * Whiskey Cove PMIC has 13 physical GPIO pins divided into 3 banks: + * Bank 0: Pin 0 - 6 + * Bank 1: Pin 7 - 10 + * Bank 2: Pin 11 -12 + * Each pin has one output control register and one input control register. + */ +#define BANK0_NR_PINS 7 +#define BANK1_NR_PINS 4 +#define BANK2_NR_PINS 2 +#define WCOVE_GPIO_NUM (BANK0_NR_PINS + BANK1_NR_PINS + BANK2_NR_PINS) +#define WCOVE_VGPIO_NUM 94 +/* GPIO output control registers (one per pin): 0x4e44 - 0x4e50 */ +#define GPIO_OUT_CTRL_BASE 0x4e44 +/* GPIO input control registers (one per pin): 0x4e51 - 0x4e5d */ +#define GPIO_IN_CTRL_BASE 0x4e51 + +/* + * GPIO interrupts are organized in two groups: + * Group 0: Bank 0 pins (Pin 0 - 6) + * Group 1: Bank 1 and Bank 2 pins (Pin 7 - 12) + * Each group has two registers (one bit per pin): status and mask. + */ +#define GROUP0_NR_IRQS 7 +#define GROUP1_NR_IRQS 6 +#define IRQ_MASK_BASE 0x4e19 +#define IRQ_STATUS_BASE 0x4e0b +#define GPIO_IRQ0_MASK GENMASK(6, 0) +#define GPIO_IRQ1_MASK GENMASK(5, 0) +#define UPDATE_IRQ_TYPE BIT(0) +#define UPDATE_IRQ_MASK BIT(1) + +#define CTLI_INTCNT_DIS (0 << 1) +#define CTLI_INTCNT_NE (1 << 1) +#define CTLI_INTCNT_PE (2 << 1) +#define CTLI_INTCNT_BE (3 << 1) + +#define CTLO_DIR_IN (0 << 5) +#define CTLO_DIR_OUT (1 << 5) + +#define CTLO_DRV_MASK (1 << 4) +#define CTLO_DRV_OD (0 << 4) +#define CTLO_DRV_CMOS (1 << 4) + +#define CTLO_DRV_REN (1 << 3) + +#define CTLO_RVAL_2KDOWN (0 << 1) +#define CTLO_RVAL_2KUP (1 << 1) +#define CTLO_RVAL_50KDOWN (2 << 1) +#define CTLO_RVAL_50KUP (3 << 1) + +#define CTLO_INPUT_SET (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP) +#define CTLO_OUTPUT_SET (CTLO_DIR_OUT | CTLO_INPUT_SET) + +enum ctrl_register { + CTRL_IN, + CTRL_OUT, +}; + +/* + * struct wcove_gpio - Whiskey Cove GPIO controller + * @buslock: for bus lock/sync and unlock. + * @chip: the abstract gpio_chip structure. + * @dev: the gpio device + * @regmap: the regmap from the parent device. + * @regmap_irq_chip: the regmap of the gpio irq chip. + * @update: pending IRQ setting update, to be written to the chip upon unlock. + * @intcnt: the Interrupt Detect value to be written. + * @set_irq_mask: true if the IRQ mask needs to be set, false to clear. + */ +struct wcove_gpio { + struct mutex buslock; + struct gpio_chip chip; + struct device *dev; + struct regmap *regmap; + struct regmap_irq_chip_data *regmap_irq_chip; + int update; + int intcnt; + bool set_irq_mask; +}; + +static inline unsigned int to_reg(int gpio, enum ctrl_register reg_type) +{ + unsigned int reg; + + if (gpio >= WCOVE_GPIO_NUM) + return -EOPNOTSUPP; + + if (reg_type == CTRL_IN) + reg = GPIO_IN_CTRL_BASE + gpio; + else + reg = GPIO_OUT_CTRL_BASE + gpio; + + return reg; +} + +static void wcove_update_irq_mask(struct wcove_gpio *wg, int gpio) +{ + unsigned int reg, mask; + + if (gpio < GROUP0_NR_IRQS) { + reg = IRQ_MASK_BASE; + mask = BIT(gpio % GROUP0_NR_IRQS); + } else { + reg = IRQ_MASK_BASE + 1; + mask = BIT((gpio - GROUP0_NR_IRQS) % GROUP1_NR_IRQS); + } + + if (wg->set_irq_mask) + regmap_update_bits(wg->regmap, reg, mask, mask); + else + regmap_update_bits(wg->regmap, reg, mask, 0); +} + +static void wcove_update_irq_ctrl(struct wcove_gpio *wg, int gpio) +{ + int reg = to_reg(gpio, CTRL_IN); + + if (reg < 0) + return; + + regmap_update_bits(wg->regmap, reg, CTLI_INTCNT_BE, wg->intcnt); +} + +static int wcove_gpio_dir_in(struct gpio_chip *chip, unsigned int gpio) +{ + struct wcove_gpio *wg = gpiochip_get_data(chip); + int reg = to_reg(gpio, CTRL_OUT); + + if (reg < 0) + return 0; + + return regmap_write(wg->regmap, reg, CTLO_INPUT_SET); +} + +static int wcove_gpio_dir_out(struct gpio_chip *chip, unsigned int gpio, + int value) +{ + struct wcove_gpio *wg = gpiochip_get_data(chip); + int reg = to_reg(gpio, CTRL_OUT); + + if (reg < 0) + return 0; + + return regmap_write(wg->regmap, reg, CTLO_OUTPUT_SET | value); +} + +static int wcove_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio) +{ + struct wcove_gpio *wg = gpiochip_get_data(chip); + unsigned int val; + int ret, reg = to_reg(gpio, CTRL_OUT); + + if (reg < 0) + return 0; + + ret = regmap_read(wg->regmap, reg, &val); + if (ret) + return ret; + + return !(val & CTLO_DIR_OUT); +} + +static int wcove_gpio_get(struct gpio_chip *chip, unsigned int gpio) +{ + struct wcove_gpio *wg = gpiochip_get_data(chip); + unsigned int val; + int ret, reg = to_reg(gpio, CTRL_IN); + + if (reg < 0) + return 0; + + ret = regmap_read(wg->regmap, reg, &val); + if (ret) + return ret; + + return val & 0x1; +} + +static void wcove_gpio_set(struct gpio_chip *chip, + unsigned int gpio, int value) +{ + struct wcove_gpio *wg = gpiochip_get_data(chip); + int reg = to_reg(gpio, CTRL_OUT); + + if (reg < 0) + return; + + if (value) + regmap_update_bits(wg->regmap, reg, 1, 1); + else + regmap_update_bits(wg->regmap, reg, 1, 0); +} + +static int wcove_gpio_set_config(struct gpio_chip *chip, unsigned int gpio, + unsigned long config) +{ + struct wcove_gpio *wg = gpiochip_get_data(chip); + int reg = to_reg(gpio, CTRL_OUT); + + if (reg < 0) + return 0; + + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK, + CTLO_DRV_OD); + case PIN_CONFIG_DRIVE_PUSH_PULL: + return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK, + CTLO_DRV_CMOS); + default: + break; + } + + return -ENOTSUPP; +} + +static int wcove_irq_type(struct irq_data *data, unsigned int type) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct wcove_gpio *wg = gpiochip_get_data(chip); + + if (data->hwirq >= WCOVE_GPIO_NUM) + return 0; + + switch (type) { + case IRQ_TYPE_NONE: + wg->intcnt = CTLI_INTCNT_DIS; + break; + case IRQ_TYPE_EDGE_BOTH: + wg->intcnt = CTLI_INTCNT_BE; + break; + case IRQ_TYPE_EDGE_RISING: + wg->intcnt = CTLI_INTCNT_PE; + break; + case IRQ_TYPE_EDGE_FALLING: + wg->intcnt = CTLI_INTCNT_NE; + break; + default: + return -EINVAL; + } + + wg->update |= UPDATE_IRQ_TYPE; + + return 0; +} + +static void wcove_bus_lock(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct wcove_gpio *wg = gpiochip_get_data(chip); + + mutex_lock(&wg->buslock); +} + +static void wcove_bus_sync_unlock(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct wcove_gpio *wg = gpiochip_get_data(chip); + int gpio = data->hwirq; + + if (wg->update & UPDATE_IRQ_TYPE) + wcove_update_irq_ctrl(wg, gpio); + if (wg->update & UPDATE_IRQ_MASK) + wcove_update_irq_mask(wg, gpio); + wg->update = 0; + + mutex_unlock(&wg->buslock); +} + +static void wcove_irq_unmask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct wcove_gpio *wg = gpiochip_get_data(chip); + + if (data->hwirq >= WCOVE_GPIO_NUM) + return; + + wg->set_irq_mask = false; + wg->update |= UPDATE_IRQ_MASK; +} + +static void wcove_irq_mask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct wcove_gpio *wg = gpiochip_get_data(chip); + + if (data->hwirq >= WCOVE_GPIO_NUM) + return; + + wg->set_irq_mask = true; + wg->update |= UPDATE_IRQ_MASK; +} + +static struct irq_chip wcove_irqchip = { + .name = "Whiskey Cove", + .irq_mask = wcove_irq_mask, + .irq_unmask = wcove_irq_unmask, + .irq_set_type = wcove_irq_type, + .irq_bus_lock = wcove_bus_lock, + .irq_bus_sync_unlock = wcove_bus_sync_unlock, +}; + +static irqreturn_t wcove_gpio_irq_handler(int irq, void *data) +{ + struct wcove_gpio *wg = (struct wcove_gpio *)data; + unsigned int pending, virq, gpio, mask, offset; + u8 p[2]; + + if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) { + dev_err(wg->dev, "Failed to read irq status register\n"); + return IRQ_NONE; + } + + pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7); + if (!pending) + return IRQ_NONE; + + /* Iterate until no interrupt is pending */ + while (pending) { + /* One iteration is for all pending bits */ + for_each_set_bit(gpio, (const unsigned long *)&pending, + WCOVE_GPIO_NUM) { + offset = (gpio > GROUP0_NR_IRQS) ? 1 : 0; + mask = (offset == 1) ? BIT(gpio - GROUP0_NR_IRQS) : + BIT(gpio); + virq = irq_find_mapping(wg->chip.irq.domain, gpio); + handle_nested_irq(virq); + regmap_update_bits(wg->regmap, IRQ_STATUS_BASE + offset, + mask, mask); + } + + /* Next iteration */ + if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) { + dev_err(wg->dev, "Failed to read irq status\n"); + break; + } + + pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7); + } + + return IRQ_HANDLED; +} + +static void wcove_gpio_dbg_show(struct seq_file *s, + struct gpio_chip *chip) +{ + unsigned int ctlo, ctli, irq_mask, irq_status; + struct wcove_gpio *wg = gpiochip_get_data(chip); + int gpio, offset, group, ret = 0; + + for (gpio = 0; gpio < WCOVE_GPIO_NUM; gpio++) { + group = gpio < GROUP0_NR_IRQS ? 0 : 1; + ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_OUT), &ctlo); + ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_IN), &ctli); + ret += regmap_read(wg->regmap, IRQ_MASK_BASE + group, + &irq_mask); + ret += regmap_read(wg->regmap, IRQ_STATUS_BASE + group, + &irq_status); + if (ret) { + pr_err("Failed to read registers: ctrl out/in or irq status/mask\n"); + break; + } + + offset = gpio % 8; + seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s\n", + gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ", + ctli & 0x1 ? "hi" : "lo", + ctli & CTLI_INTCNT_NE ? "fall" : " ", + ctli & CTLI_INTCNT_PE ? "rise" : " ", + ctlo, + irq_mask & BIT(offset) ? "mask " : "unmask", + irq_status & BIT(offset) ? "pending" : " "); + } +} + +static int wcove_gpio_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic; + struct wcove_gpio *wg; + int virq, ret, irq; + struct device *dev; + + /* + * This gpio platform device is created by a mfd device (see + * drivers/mfd/intel_soc_pmic_bxtwc.c for details). Information + * shared by all sub-devices created by the mfd device, the regmap + * pointer for instance, is stored as driver data of the mfd device + * driver. + */ + pmic = dev_get_drvdata(pdev->dev.parent); + if (!pmic) + return -ENODEV; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + dev = &pdev->dev; + + wg = devm_kzalloc(dev, sizeof(*wg), GFP_KERNEL); + if (!wg) + return -ENOMEM; + + wg->regmap_irq_chip = pmic->irq_chip_data; + + platform_set_drvdata(pdev, wg); + + mutex_init(&wg->buslock); + wg->chip.label = KBUILD_MODNAME; + wg->chip.direction_input = wcove_gpio_dir_in; + wg->chip.direction_output = wcove_gpio_dir_out; + wg->chip.get_direction = wcove_gpio_get_direction; + wg->chip.get = wcove_gpio_get; + wg->chip.set = wcove_gpio_set; + wg->chip.set_config = wcove_gpio_set_config, + wg->chip.base = -1; + wg->chip.ngpio = WCOVE_VGPIO_NUM; + wg->chip.can_sleep = true; + wg->chip.parent = pdev->dev.parent; + wg->chip.dbg_show = wcove_gpio_dbg_show; + wg->dev = dev; + wg->regmap = pmic->regmap; + + ret = devm_gpiochip_add_data(dev, &wg->chip, wg); + if (ret) { + dev_err(dev, "Failed to add gpiochip: %d\n", ret); + return ret; + } + + ret = gpiochip_irqchip_add_nested(&wg->chip, &wcove_irqchip, 0, + handle_simple_irq, IRQ_TYPE_NONE); + if (ret) { + dev_err(dev, "Failed to add irqchip: %d\n", ret); + return ret; + } + + virq = regmap_irq_get_virq(wg->regmap_irq_chip, irq); + if (virq < 0) { + dev_err(dev, "Failed to get virq by irq %d\n", irq); + return virq; + } + + ret = devm_request_threaded_irq(dev, virq, NULL, + wcove_gpio_irq_handler, IRQF_ONESHOT, pdev->name, wg); + if (ret) { + dev_err(dev, "Failed to request irq %d\n", virq); + return ret; + } + + gpiochip_set_nested_irqchip(&wg->chip, &wcove_irqchip, virq); + + /* Enable GPIO0 interrupts */ + ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE, GPIO_IRQ0_MASK, + 0x00); + if (ret) + return ret; + + /* Enable GPIO1 interrupts */ + ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE + 1, GPIO_IRQ1_MASK, + 0x00); + if (ret) + return ret; + + return 0; +} + +/* + * Whiskey Cove PMIC itself is a analog device(but with digital control + * interface) providing power management support for other devices in + * the accompanied SoC, so we have no .pm for Whiskey Cove GPIO driver. + */ +static struct platform_driver wcove_gpio_driver = { + .driver = { + .name = "bxt_wcove_gpio", + }, + .probe = wcove_gpio_probe, +}; + +module_platform_driver(wcove_gpio_driver); + +MODULE_AUTHOR("Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com>"); +MODULE_AUTHOR("Bin Gao <bin.gao@intel.com>"); +MODULE_DESCRIPTION("Intel Whiskey Cove GPIO Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:bxt_wcove_gpio"); diff --git a/drivers/gpio/gpio-winbond.c b/drivers/gpio/gpio-winbond.c new file mode 100644 index 000000000..7f8f5b02e --- /dev/null +++ b/drivers/gpio/gpio-winbond.c @@ -0,0 +1,732 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * GPIO interface for Winbond Super I/O chips + * Currently, only W83627UHG (Nuvoton NCT6627UD) is supported. + * + * Author: Maciej S. Szmigiero <mail@maciej.szmigiero.name> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/gpio/driver.h> +#include <linux/ioport.h> +#include <linux/isa.h> +#include <linux/module.h> + +#define WB_GPIO_DRIVER_NAME KBUILD_MODNAME + +#define WB_SIO_BASE 0x2e +#define WB_SIO_BASE_HIGH 0x4e + +#define WB_SIO_EXT_ENTER_KEY 0x87 +#define WB_SIO_EXT_EXIT_KEY 0xaa + +/* global chip registers */ + +#define WB_SIO_REG_LOGICAL 0x07 + +#define WB_SIO_REG_CHIP_MSB 0x20 +#define WB_SIO_REG_CHIP_LSB 0x21 + +#define WB_SIO_CHIP_ID_W83627UHG 0xa230 +#define WB_SIO_CHIP_ID_W83627UHG_MASK GENMASK(15, 4) + +#define WB_SIO_REG_DPD 0x22 +#define WB_SIO_REG_DPD_UARTA 4 +#define WB_SIO_REG_DPD_UARTB 5 + +#define WB_SIO_REG_IDPD 0x23 +#define WB_SIO_REG_IDPD_UARTC 4 +#define WB_SIO_REG_IDPD_UARTD 5 +#define WB_SIO_REG_IDPD_UARTE 6 +#define WB_SIO_REG_IDPD_UARTF 7 + +#define WB_SIO_REG_GLOBAL_OPT 0x24 +#define WB_SIO_REG_GO_ENFDC 1 + +#define WB_SIO_REG_OVTGPIO3456 0x29 +#define WB_SIO_REG_OG3456_G3PP 3 +#define WB_SIO_REG_OG3456_G4PP 4 +#define WB_SIO_REG_OG3456_G5PP 5 +#define WB_SIO_REG_OG3456_G6PP 7 + +#define WB_SIO_REG_I2C_PS 0x2a +#define WB_SIO_REG_I2CPS_I2CFS 1 + +#define WB_SIO_REG_GPIO1_MF 0x2c +#define WB_SIO_REG_G1MF_G1PP 6 +#define WB_SIO_REG_G1MF_G2PP 7 +#define WB_SIO_REG_G1MF_FS_MASK GENMASK(1, 0) +#define WB_SIO_REG_G1MF_FS_IR_OFF 0 +#define WB_SIO_REG_G1MF_FS_IR 1 +#define WB_SIO_REG_G1MF_FS_GPIO1 2 +#define WB_SIO_REG_G1MF_FS_UARTB 3 + +/* not an actual device number, just a value meaning 'no device' */ +#define WB_SIO_DEV_NONE 0xff + +/* registers with offsets >= 0x30 are specific for a particular device */ + +/* UART B logical device */ +#define WB_SIO_DEV_UARTB 0x03 +#define WB_SIO_UARTB_REG_ENABLE 0x30 +#define WB_SIO_UARTB_ENABLE_ON 0 + +/* UART C logical device */ +#define WB_SIO_DEV_UARTC 0x06 +#define WB_SIO_UARTC_REG_ENABLE 0x30 +#define WB_SIO_UARTC_ENABLE_ON 0 + +/* GPIO3, GPIO4 logical device */ +#define WB_SIO_DEV_GPIO34 0x07 +#define WB_SIO_GPIO34_REG_ENABLE 0x30 +#define WB_SIO_GPIO34_ENABLE_3 0 +#define WB_SIO_GPIO34_ENABLE_4 1 +#define WB_SIO_GPIO34_REG_IO3 0xe0 +#define WB_SIO_GPIO34_REG_DATA3 0xe1 +#define WB_SIO_GPIO34_REG_INV3 0xe2 +#define WB_SIO_GPIO34_REG_IO4 0xe4 +#define WB_SIO_GPIO34_REG_DATA4 0xe5 +#define WB_SIO_GPIO34_REG_INV4 0xe6 + +/* WDTO, PLED, GPIO5, GPIO6 logical device */ +#define WB_SIO_DEV_WDGPIO56 0x08 +#define WB_SIO_WDGPIO56_REG_ENABLE 0x30 +#define WB_SIO_WDGPIO56_ENABLE_5 1 +#define WB_SIO_WDGPIO56_ENABLE_6 2 +#define WB_SIO_WDGPIO56_REG_IO5 0xe0 +#define WB_SIO_WDGPIO56_REG_DATA5 0xe1 +#define WB_SIO_WDGPIO56_REG_INV5 0xe2 +#define WB_SIO_WDGPIO56_REG_IO6 0xe4 +#define WB_SIO_WDGPIO56_REG_DATA6 0xe5 +#define WB_SIO_WDGPIO56_REG_INV6 0xe6 + +/* GPIO1, GPIO2, SUSLED logical device */ +#define WB_SIO_DEV_GPIO12 0x09 +#define WB_SIO_GPIO12_REG_ENABLE 0x30 +#define WB_SIO_GPIO12_ENABLE_1 0 +#define WB_SIO_GPIO12_ENABLE_2 1 +#define WB_SIO_GPIO12_REG_IO1 0xe0 +#define WB_SIO_GPIO12_REG_DATA1 0xe1 +#define WB_SIO_GPIO12_REG_INV1 0xe2 +#define WB_SIO_GPIO12_REG_IO2 0xe4 +#define WB_SIO_GPIO12_REG_DATA2 0xe5 +#define WB_SIO_GPIO12_REG_INV2 0xe6 + +/* UART D logical device */ +#define WB_SIO_DEV_UARTD 0x0d +#define WB_SIO_UARTD_REG_ENABLE 0x30 +#define WB_SIO_UARTD_ENABLE_ON 0 + +/* UART E logical device */ +#define WB_SIO_DEV_UARTE 0x0e +#define WB_SIO_UARTE_REG_ENABLE 0x30 +#define WB_SIO_UARTE_ENABLE_ON 0 + +/* + * for a description what a particular field of this struct means please see + * a description of the relevant module parameter at the bottom of this file + */ +struct winbond_gpio_params { + unsigned long base; + unsigned long gpios; + unsigned long ppgpios; + unsigned long odgpios; + bool pledgpio; + bool beepgpio; + bool i2cgpio; +}; + +static struct winbond_gpio_params params; + +static int winbond_sio_enter(unsigned long base) +{ + if (!request_muxed_region(base, 2, WB_GPIO_DRIVER_NAME)) + return -EBUSY; + + /* + * datasheet says two successive writes of the "key" value are needed + * in order for chip to enter the "Extended Function Mode" + */ + outb(WB_SIO_EXT_ENTER_KEY, base); + outb(WB_SIO_EXT_ENTER_KEY, base); + + return 0; +} + +static void winbond_sio_select_logical(unsigned long base, u8 dev) +{ + outb(WB_SIO_REG_LOGICAL, base); + outb(dev, base + 1); +} + +static void winbond_sio_leave(unsigned long base) +{ + outb(WB_SIO_EXT_EXIT_KEY, base); + + release_region(base, 2); +} + +static void winbond_sio_reg_write(unsigned long base, u8 reg, u8 data) +{ + outb(reg, base); + outb(data, base + 1); +} + +static u8 winbond_sio_reg_read(unsigned long base, u8 reg) +{ + outb(reg, base); + return inb(base + 1); +} + +static void winbond_sio_reg_bset(unsigned long base, u8 reg, u8 bit) +{ + u8 val; + + val = winbond_sio_reg_read(base, reg); + val |= BIT(bit); + winbond_sio_reg_write(base, reg, val); +} + +static void winbond_sio_reg_bclear(unsigned long base, u8 reg, u8 bit) +{ + u8 val; + + val = winbond_sio_reg_read(base, reg); + val &= ~BIT(bit); + winbond_sio_reg_write(base, reg, val); +} + +static bool winbond_sio_reg_btest(unsigned long base, u8 reg, u8 bit) +{ + return winbond_sio_reg_read(base, reg) & BIT(bit); +} + +/** + * struct winbond_gpio_port_conflict - possibly conflicting device information + * @name: device name (NULL means no conflicting device defined) + * @dev: Super I/O logical device number where the testreg register + * is located (or WB_SIO_DEV_NONE - don't select any + * logical device) + * @testreg: register number where the testbit bit is located + * @testbit: index of a bit to check whether an actual conflict exists + * @warnonly: if set then a conflict isn't fatal (just warn about it), + * otherwise disable the particular GPIO port if a conflict + * is detected + */ +struct winbond_gpio_port_conflict { + const char *name; + u8 dev; + u8 testreg; + u8 testbit; + bool warnonly; +}; + +/** + * struct winbond_gpio_info - information about a particular GPIO port (device) + * @dev: Super I/O logical device number of the registers + * specified below + * @enablereg: port enable bit register number + * @enablebit: index of a port enable bit + * @outputreg: output driver mode bit register number + * @outputppbit: index of a push-pull output driver mode bit + * @ioreg: data direction register number + * @invreg: pin data inversion register number + * @datareg: pin data register number + * @conflict: description of a device that possibly conflicts with + * this port + */ +struct winbond_gpio_info { + u8 dev; + u8 enablereg; + u8 enablebit; + u8 outputreg; + u8 outputppbit; + u8 ioreg; + u8 invreg; + u8 datareg; + struct winbond_gpio_port_conflict conflict; +}; + +static const struct winbond_gpio_info winbond_gpio_infos[6] = { + { /* 0 */ + .dev = WB_SIO_DEV_GPIO12, + .enablereg = WB_SIO_GPIO12_REG_ENABLE, + .enablebit = WB_SIO_GPIO12_ENABLE_1, + .outputreg = WB_SIO_REG_GPIO1_MF, + .outputppbit = WB_SIO_REG_G1MF_G1PP, + .ioreg = WB_SIO_GPIO12_REG_IO1, + .invreg = WB_SIO_GPIO12_REG_INV1, + .datareg = WB_SIO_GPIO12_REG_DATA1, + .conflict = { + .name = "UARTB", + .dev = WB_SIO_DEV_UARTB, + .testreg = WB_SIO_UARTB_REG_ENABLE, + .testbit = WB_SIO_UARTB_ENABLE_ON, + .warnonly = true + } + }, + { /* 1 */ + .dev = WB_SIO_DEV_GPIO12, + .enablereg = WB_SIO_GPIO12_REG_ENABLE, + .enablebit = WB_SIO_GPIO12_ENABLE_2, + .outputreg = WB_SIO_REG_GPIO1_MF, + .outputppbit = WB_SIO_REG_G1MF_G2PP, + .ioreg = WB_SIO_GPIO12_REG_IO2, + .invreg = WB_SIO_GPIO12_REG_INV2, + .datareg = WB_SIO_GPIO12_REG_DATA2 + /* special conflict handling so doesn't use conflict data */ + }, + { /* 2 */ + .dev = WB_SIO_DEV_GPIO34, + .enablereg = WB_SIO_GPIO34_REG_ENABLE, + .enablebit = WB_SIO_GPIO34_ENABLE_3, + .outputreg = WB_SIO_REG_OVTGPIO3456, + .outputppbit = WB_SIO_REG_OG3456_G3PP, + .ioreg = WB_SIO_GPIO34_REG_IO3, + .invreg = WB_SIO_GPIO34_REG_INV3, + .datareg = WB_SIO_GPIO34_REG_DATA3, + .conflict = { + .name = "UARTC", + .dev = WB_SIO_DEV_UARTC, + .testreg = WB_SIO_UARTC_REG_ENABLE, + .testbit = WB_SIO_UARTC_ENABLE_ON, + .warnonly = true + } + }, + { /* 3 */ + .dev = WB_SIO_DEV_GPIO34, + .enablereg = WB_SIO_GPIO34_REG_ENABLE, + .enablebit = WB_SIO_GPIO34_ENABLE_4, + .outputreg = WB_SIO_REG_OVTGPIO3456, + .outputppbit = WB_SIO_REG_OG3456_G4PP, + .ioreg = WB_SIO_GPIO34_REG_IO4, + .invreg = WB_SIO_GPIO34_REG_INV4, + .datareg = WB_SIO_GPIO34_REG_DATA4, + .conflict = { + .name = "UARTD", + .dev = WB_SIO_DEV_UARTD, + .testreg = WB_SIO_UARTD_REG_ENABLE, + .testbit = WB_SIO_UARTD_ENABLE_ON, + .warnonly = true + } + }, + { /* 4 */ + .dev = WB_SIO_DEV_WDGPIO56, + .enablereg = WB_SIO_WDGPIO56_REG_ENABLE, + .enablebit = WB_SIO_WDGPIO56_ENABLE_5, + .outputreg = WB_SIO_REG_OVTGPIO3456, + .outputppbit = WB_SIO_REG_OG3456_G5PP, + .ioreg = WB_SIO_WDGPIO56_REG_IO5, + .invreg = WB_SIO_WDGPIO56_REG_INV5, + .datareg = WB_SIO_WDGPIO56_REG_DATA5, + .conflict = { + .name = "UARTE", + .dev = WB_SIO_DEV_UARTE, + .testreg = WB_SIO_UARTE_REG_ENABLE, + .testbit = WB_SIO_UARTE_ENABLE_ON, + .warnonly = true + } + }, + { /* 5 */ + .dev = WB_SIO_DEV_WDGPIO56, + .enablereg = WB_SIO_WDGPIO56_REG_ENABLE, + .enablebit = WB_SIO_WDGPIO56_ENABLE_6, + .outputreg = WB_SIO_REG_OVTGPIO3456, + .outputppbit = WB_SIO_REG_OG3456_G6PP, + .ioreg = WB_SIO_WDGPIO56_REG_IO6, + .invreg = WB_SIO_WDGPIO56_REG_INV6, + .datareg = WB_SIO_WDGPIO56_REG_DATA6, + .conflict = { + .name = "FDC", + .dev = WB_SIO_DEV_NONE, + .testreg = WB_SIO_REG_GLOBAL_OPT, + .testbit = WB_SIO_REG_GO_ENFDC, + .warnonly = false + } + } +}; + +/* returns whether changing a pin is allowed */ +static bool winbond_gpio_get_info(unsigned int *gpio_num, + const struct winbond_gpio_info **info) +{ + bool allow_changing = true; + unsigned long i; + + for_each_set_bit(i, ¶ms.gpios, BITS_PER_LONG) { + if (*gpio_num < 8) + break; + + *gpio_num -= 8; + } + + *info = &winbond_gpio_infos[i]; + + /* + * GPIO2 (the second port) shares some pins with a basic PC + * functionality, which is very likely controlled by the firmware. + * Don't allow changing these pins by default. + */ + if (i == 1) { + if (*gpio_num == 0 && !params.pledgpio) + allow_changing = false; + else if (*gpio_num == 1 && !params.beepgpio) + allow_changing = false; + else if ((*gpio_num == 5 || *gpio_num == 6) && !params.i2cgpio) + allow_changing = false; + } + + return allow_changing; +} + +static int winbond_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + unsigned long *base = gpiochip_get_data(gc); + const struct winbond_gpio_info *info; + bool val; + + winbond_gpio_get_info(&offset, &info); + + val = winbond_sio_enter(*base); + if (val) + return val; + + winbond_sio_select_logical(*base, info->dev); + + val = winbond_sio_reg_btest(*base, info->datareg, offset); + if (winbond_sio_reg_btest(*base, info->invreg, offset)) + val = !val; + + winbond_sio_leave(*base); + + return val; +} + +static int winbond_gpio_direction_in(struct gpio_chip *gc, unsigned int offset) +{ + unsigned long *base = gpiochip_get_data(gc); + const struct winbond_gpio_info *info; + int ret; + + if (!winbond_gpio_get_info(&offset, &info)) + return -EACCES; + + ret = winbond_sio_enter(*base); + if (ret) + return ret; + + winbond_sio_select_logical(*base, info->dev); + + winbond_sio_reg_bset(*base, info->ioreg, offset); + + winbond_sio_leave(*base); + + return 0; +} + +static int winbond_gpio_direction_out(struct gpio_chip *gc, + unsigned int offset, + int val) +{ + unsigned long *base = gpiochip_get_data(gc); + const struct winbond_gpio_info *info; + int ret; + + if (!winbond_gpio_get_info(&offset, &info)) + return -EACCES; + + ret = winbond_sio_enter(*base); + if (ret) + return ret; + + winbond_sio_select_logical(*base, info->dev); + + winbond_sio_reg_bclear(*base, info->ioreg, offset); + + if (winbond_sio_reg_btest(*base, info->invreg, offset)) + val = !val; + + if (val) + winbond_sio_reg_bset(*base, info->datareg, offset); + else + winbond_sio_reg_bclear(*base, info->datareg, offset); + + winbond_sio_leave(*base); + + return 0; +} + +static void winbond_gpio_set(struct gpio_chip *gc, unsigned int offset, + int val) +{ + unsigned long *base = gpiochip_get_data(gc); + const struct winbond_gpio_info *info; + + if (!winbond_gpio_get_info(&offset, &info)) + return; + + if (winbond_sio_enter(*base) != 0) + return; + + winbond_sio_select_logical(*base, info->dev); + + if (winbond_sio_reg_btest(*base, info->invreg, offset)) + val = !val; + + if (val) + winbond_sio_reg_bset(*base, info->datareg, offset); + else + winbond_sio_reg_bclear(*base, info->datareg, offset); + + winbond_sio_leave(*base); +} + +static struct gpio_chip winbond_gpio_chip = { + .base = -1, + .label = WB_GPIO_DRIVER_NAME, + .owner = THIS_MODULE, + .can_sleep = true, + .get = winbond_gpio_get, + .direction_input = winbond_gpio_direction_in, + .set = winbond_gpio_set, + .direction_output = winbond_gpio_direction_out, +}; + +static void winbond_gpio_configure_port0_pins(unsigned long base) +{ + unsigned int val; + + val = winbond_sio_reg_read(base, WB_SIO_REG_GPIO1_MF); + if ((val & WB_SIO_REG_G1MF_FS_MASK) == WB_SIO_REG_G1MF_FS_GPIO1) + return; + + pr_warn("GPIO1 pins were connected to something else (%.2x), fixing\n", + val); + + val &= ~WB_SIO_REG_G1MF_FS_MASK; + val |= WB_SIO_REG_G1MF_FS_GPIO1; + + winbond_sio_reg_write(base, WB_SIO_REG_GPIO1_MF, val); +} + +static void winbond_gpio_configure_port1_check_i2c(unsigned long base) +{ + params.i2cgpio = !winbond_sio_reg_btest(base, WB_SIO_REG_I2C_PS, + WB_SIO_REG_I2CPS_I2CFS); + if (!params.i2cgpio) + pr_warn("disabling GPIO2.5 and GPIO2.6 as I2C is enabled\n"); +} + +static bool winbond_gpio_configure_port(unsigned long base, unsigned int idx) +{ + const struct winbond_gpio_info *info = &winbond_gpio_infos[idx]; + const struct winbond_gpio_port_conflict *conflict = &info->conflict; + + /* is there a possible conflicting device defined? */ + if (conflict->name != NULL) { + if (conflict->dev != WB_SIO_DEV_NONE) + winbond_sio_select_logical(base, conflict->dev); + + if (winbond_sio_reg_btest(base, conflict->testreg, + conflict->testbit)) { + if (conflict->warnonly) + pr_warn("enabled GPIO%u share pins with active %s\n", + idx + 1, conflict->name); + else { + pr_warn("disabling GPIO%u as %s is enabled\n", + idx + 1, conflict->name); + return false; + } + } + } + + /* GPIO1 and GPIO2 need some (additional) special handling */ + if (idx == 0) + winbond_gpio_configure_port0_pins(base); + else if (idx == 1) + winbond_gpio_configure_port1_check_i2c(base); + + winbond_sio_select_logical(base, info->dev); + + winbond_sio_reg_bset(base, info->enablereg, info->enablebit); + + if (params.ppgpios & BIT(idx)) + winbond_sio_reg_bset(base, info->outputreg, + info->outputppbit); + else if (params.odgpios & BIT(idx)) + winbond_sio_reg_bclear(base, info->outputreg, + info->outputppbit); + else + pr_notice("GPIO%u pins are %s\n", idx + 1, + winbond_sio_reg_btest(base, info->outputreg, + info->outputppbit) ? + "push-pull" : + "open drain"); + + return true; +} + +static int winbond_gpio_configure(unsigned long base) +{ + unsigned long i; + + for_each_set_bit(i, ¶ms.gpios, BITS_PER_LONG) + if (!winbond_gpio_configure_port(base, i)) + __clear_bit(i, ¶ms.gpios); + + if (!params.gpios) { + pr_err("please use 'gpios' module parameter to select some active GPIO ports to enable\n"); + return -EINVAL; + } + + return 0; +} + +static int winbond_gpio_check_chip(unsigned long base) +{ + int ret; + unsigned int chip; + + ret = winbond_sio_enter(base); + if (ret) + return ret; + + chip = winbond_sio_reg_read(base, WB_SIO_REG_CHIP_MSB) << 8; + chip |= winbond_sio_reg_read(base, WB_SIO_REG_CHIP_LSB); + + pr_notice("chip ID at %lx is %.4x\n", base, chip); + + if ((chip & WB_SIO_CHIP_ID_W83627UHG_MASK) != + WB_SIO_CHIP_ID_W83627UHG) { + pr_err("not an our chip\n"); + ret = -ENODEV; + } + + winbond_sio_leave(base); + + return ret; +} + +static int winbond_gpio_imatch(struct device *dev, unsigned int id) +{ + unsigned long gpios_rem; + int ret; + + gpios_rem = params.gpios & ~GENMASK(ARRAY_SIZE(winbond_gpio_infos) - 1, + 0); + if (gpios_rem) { + pr_warn("unknown ports (%lx) enabled in GPIO ports bitmask\n", + gpios_rem); + params.gpios &= ~gpios_rem; + } + + if (params.ppgpios & params.odgpios) { + pr_err("some GPIO ports are set both to push-pull and open drain mode at the same time\n"); + return 0; + } + + if (params.base != 0) + return winbond_gpio_check_chip(params.base) == 0; + + /* + * if the 'base' module parameter is unset probe two chip default + * I/O port bases + */ + params.base = WB_SIO_BASE; + ret = winbond_gpio_check_chip(params.base); + if (ret == 0) + return 1; + if (ret != -ENODEV && ret != -EBUSY) + return 0; + + params.base = WB_SIO_BASE_HIGH; + return winbond_gpio_check_chip(params.base) == 0; +} + +static int winbond_gpio_iprobe(struct device *dev, unsigned int id) +{ + int ret; + + if (params.base == 0) + return -EINVAL; + + ret = winbond_sio_enter(params.base); + if (ret) + return ret; + + ret = winbond_gpio_configure(params.base); + + winbond_sio_leave(params.base); + + if (ret) + return ret; + + /* + * Add 8 gpios for every GPIO port that was enabled in gpios + * module parameter (that wasn't disabled earlier in + * winbond_gpio_configure() & co. due to, for example, a pin conflict). + */ + winbond_gpio_chip.ngpio = hweight_long(params.gpios) * 8; + + /* + * GPIO6 port has only 5 pins, so if it is enabled we have to adjust + * the total count appropriately + */ + if (params.gpios & BIT(5)) + winbond_gpio_chip.ngpio -= (8 - 5); + + winbond_gpio_chip.parent = dev; + + return devm_gpiochip_add_data(dev, &winbond_gpio_chip, ¶ms.base); +} + +static struct isa_driver winbond_gpio_idriver = { + .driver = { + .name = WB_GPIO_DRIVER_NAME, + }, + .match = winbond_gpio_imatch, + .probe = winbond_gpio_iprobe, +}; + +module_isa_driver(winbond_gpio_idriver, 1); + +module_param_named(base, params.base, ulong, 0444); +MODULE_PARM_DESC(base, + "I/O port base (when unset - probe chip default ones)"); + +/* This parameter sets which GPIO devices (ports) we enable */ +module_param_named(gpios, params.gpios, ulong, 0444); +MODULE_PARM_DESC(gpios, + "bitmask of GPIO ports to enable (bit 0 - GPIO1, bit 1 - GPIO2, etc."); + +/* + * These two parameters below set how we configure GPIO ports output drivers. + * It can't be a one bitmask since we need three values per port: push-pull, + * open-drain and keep as-is (this is the default). + */ +module_param_named(ppgpios, params.ppgpios, ulong, 0444); +MODULE_PARM_DESC(ppgpios, + "bitmask of GPIO ports to set to push-pull mode (bit 0 - GPIO1, bit 1 - GPIO2, etc."); + +module_param_named(odgpios, params.odgpios, ulong, 0444); +MODULE_PARM_DESC(odgpios, + "bitmask of GPIO ports to set to open drain mode (bit 0 - GPIO1, bit 1 - GPIO2, etc."); + +/* + * GPIO2.0 and GPIO2.1 control a basic PC functionality that we + * don't allow tinkering with by default (it is very likely that the + * firmware owns these pins). + * These two parameters below allow overriding these prohibitions. + */ +module_param_named(pledgpio, params.pledgpio, bool, 0644); +MODULE_PARM_DESC(pledgpio, + "enable changing value of GPIO2.0 bit (Power LED), default no."); + +module_param_named(beepgpio, params.beepgpio, bool, 0644); +MODULE_PARM_DESC(beepgpio, + "enable changing value of GPIO2.1 bit (BEEP), default no."); + +MODULE_AUTHOR("Maciej S. Szmigiero <mail@maciej.szmigiero.name>"); +MODULE_DESCRIPTION("GPIO interface for Winbond Super I/O chips"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-wm831x.c b/drivers/gpio/gpio-wm831x.c new file mode 100644 index 000000000..324813e83 --- /dev/null +++ b/drivers/gpio/gpio-wm831x.c @@ -0,0 +1,319 @@ +/* + * gpiolib support for Wolfson WM831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/mfd/core.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/gpio.h> +#include <linux/mfd/wm831x/irq.h> + +struct wm831x_gpio { + struct wm831x *wm831x; + struct gpio_chip gpio_chip; +}; + +static int wm831x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + int val = WM831X_GPN_DIR; + + if (wm831x->has_gpio_ena) + val |= WM831X_GPN_TRI; + + return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset, + WM831X_GPN_DIR | WM831X_GPN_TRI | + WM831X_GPN_FN_MASK, val); +} + +static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL); + if (ret < 0) + return ret; + + if (ret & 1 << offset) + return 1; + else + return 0; +} + +static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + + wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset, + value << offset); +} + +static int wm831x_gpio_direction_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + int val = 0; + int ret; + + if (wm831x->has_gpio_ena) + val |= WM831X_GPN_TRI; + + ret = wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset, + WM831X_GPN_DIR | WM831X_GPN_TRI | + WM831X_GPN_FN_MASK, val); + if (ret < 0) + return ret; + + /* Can only set GPIO state once it's in output mode */ + wm831x_gpio_set(chip, offset, value); + + return 0; +} + +static int wm831x_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + + return irq_create_mapping(wm831x->irq_domain, + WM831X_IRQ_GPIO_1 + offset); +} + +static int wm831x_gpio_set_debounce(struct wm831x *wm831x, unsigned offset, + unsigned debounce) +{ + int reg = WM831X_GPIO1_CONTROL + offset; + int ret, fn; + + ret = wm831x_reg_read(wm831x, reg); + if (ret < 0) + return ret; + + switch (ret & WM831X_GPN_FN_MASK) { + case 0: + case 1: + break; + default: + /* Not in GPIO mode */ + return -EBUSY; + } + + if (debounce >= 32 && debounce <= 64) + fn = 0; + else if (debounce >= 4000 && debounce <= 8000) + fn = 1; + else + return -EINVAL; + + return wm831x_set_bits(wm831x, reg, WM831X_GPN_FN_MASK, fn); +} + +static int wm831x_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + int reg = WM831X_GPIO1_CONTROL + offset; + + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + return wm831x_set_bits(wm831x, reg, + WM831X_GPN_OD_MASK, WM831X_GPN_OD); + case PIN_CONFIG_DRIVE_PUSH_PULL: + return wm831x_set_bits(wm831x, reg, + WM831X_GPN_OD_MASK, 0); + case PIN_CONFIG_INPUT_DEBOUNCE: + return wm831x_gpio_set_debounce(wm831x, offset, + pinconf_to_config_argument(config)); + default: + break; + } + + return -ENOTSUPP; +} + +#ifdef CONFIG_DEBUG_FS +static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + int i, tristated; + + for (i = 0; i < chip->ngpio; i++) { + int gpio = i + chip->base; + int reg; + const char *label, *pull, *powerdomain; + + /* We report the GPIO even if it's not requested since + * we're also reporting things like alternate + * functions which apply even when the GPIO is not in + * use as a GPIO. + */ + label = gpiochip_is_requested(chip, i); + if (!label) + label = "Unrequested"; + + seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label); + + reg = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL + i); + if (reg < 0) { + dev_err(wm831x->dev, + "GPIO control %d read failed: %d\n", + gpio, reg); + seq_putc(s, '\n'); + continue; + } + + switch (reg & WM831X_GPN_PULL_MASK) { + case WM831X_GPIO_PULL_NONE: + pull = "nopull"; + break; + case WM831X_GPIO_PULL_DOWN: + pull = "pulldown"; + break; + case WM831X_GPIO_PULL_UP: + pull = "pullup"; + break; + default: + pull = "INVALID PULL"; + break; + } + + switch (i + 1) { + case 1 ... 3: + case 7 ... 9: + if (reg & WM831X_GPN_PWR_DOM) + powerdomain = "VPMIC"; + else + powerdomain = "DBVDD"; + break; + + case 4 ... 6: + case 10 ... 12: + if (reg & WM831X_GPN_PWR_DOM) + powerdomain = "SYSVDD"; + else + powerdomain = "DBVDD"; + break; + + case 13 ... 16: + powerdomain = "TPVDD"; + break; + + default: + BUG(); + break; + } + + tristated = reg & WM831X_GPN_TRI; + if (wm831x->has_gpio_ena) + tristated = !tristated; + + seq_printf(s, " %s %s %s %s%s\n" + " %s%s (0x%4x)\n", + reg & WM831X_GPN_DIR ? "in" : "out", + wm831x_gpio_get(chip, i) ? "high" : "low", + pull, + powerdomain, + reg & WM831X_GPN_POL ? "" : " inverted", + reg & WM831X_GPN_OD ? "open-drain" : "push-pull", + tristated ? " tristated" : "", + reg); + } +} +#else +#define wm831x_gpio_dbg_show NULL +#endif + +static const struct gpio_chip template_chip = { + .label = "wm831x", + .owner = THIS_MODULE, + .direction_input = wm831x_gpio_direction_in, + .get = wm831x_gpio_get, + .direction_output = wm831x_gpio_direction_out, + .set = wm831x_gpio_set, + .to_irq = wm831x_gpio_to_irq, + .set_config = wm831x_set_config, + .dbg_show = wm831x_gpio_dbg_show, + .can_sleep = true, +}; + +static int wm831x_gpio_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = &wm831x->pdata; + struct wm831x_gpio *wm831x_gpio; + int ret; + + wm831x_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm831x_gpio), + GFP_KERNEL); + if (wm831x_gpio == NULL) + return -ENOMEM; + + wm831x_gpio->wm831x = wm831x; + wm831x_gpio->gpio_chip = template_chip; + wm831x_gpio->gpio_chip.ngpio = wm831x->num_gpio; + wm831x_gpio->gpio_chip.parent = &pdev->dev; + if (pdata && pdata->gpio_base) + wm831x_gpio->gpio_chip.base = pdata->gpio_base; + else + wm831x_gpio->gpio_chip.base = -1; +#ifdef CONFIG_OF_GPIO + wm831x_gpio->gpio_chip.of_node = wm831x->dev->of_node; +#endif + + ret = devm_gpiochip_add_data(&pdev->dev, &wm831x_gpio->gpio_chip, + wm831x_gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, wm831x_gpio); + + return ret; +} + +static struct platform_driver wm831x_gpio_driver = { + .driver.name = "wm831x-gpio", + .probe = wm831x_gpio_probe, +}; + +static int __init wm831x_gpio_init(void) +{ + return platform_driver_register(&wm831x_gpio_driver); +} +subsys_initcall(wm831x_gpio_init); + +static void __exit wm831x_gpio_exit(void) +{ + platform_driver_unregister(&wm831x_gpio_driver); +} +module_exit(wm831x_gpio_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("GPIO interface for WM831x PMICs"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-gpio"); diff --git a/drivers/gpio/gpio-wm8350.c b/drivers/gpio/gpio-wm8350.c new file mode 100644 index 000000000..e46752e73 --- /dev/null +++ b/drivers/gpio/gpio-wm8350.c @@ -0,0 +1,160 @@ +/* + * gpiolib support for Wolfson WM835x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/mfd/core.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> + +#include <linux/mfd/wm8350/core.h> +#include <linux/mfd/wm8350/gpio.h> + +struct wm8350_gpio_data { + struct wm8350 *wm8350; + struct gpio_chip gpio_chip; +}; + +static int wm8350_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct wm8350_gpio_data *wm8350_gpio = gpiochip_get_data(chip); + struct wm8350 *wm8350 = wm8350_gpio->wm8350; + + return wm8350_set_bits(wm8350, WM8350_GPIO_CONFIGURATION_I_O, + 1 << offset); +} + +static int wm8350_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct wm8350_gpio_data *wm8350_gpio = gpiochip_get_data(chip); + struct wm8350 *wm8350 = wm8350_gpio->wm8350; + int ret; + + ret = wm8350_reg_read(wm8350, WM8350_GPIO_LEVEL); + if (ret < 0) + return ret; + + if (ret & (1 << offset)) + return 1; + else + return 0; +} + +static void wm8350_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct wm8350_gpio_data *wm8350_gpio = gpiochip_get_data(chip); + struct wm8350 *wm8350 = wm8350_gpio->wm8350; + + if (value) + wm8350_set_bits(wm8350, WM8350_GPIO_LEVEL, 1 << offset); + else + wm8350_clear_bits(wm8350, WM8350_GPIO_LEVEL, 1 << offset); +} + +static int wm8350_gpio_direction_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct wm8350_gpio_data *wm8350_gpio = gpiochip_get_data(chip); + struct wm8350 *wm8350 = wm8350_gpio->wm8350; + int ret; + + ret = wm8350_clear_bits(wm8350, WM8350_GPIO_CONFIGURATION_I_O, + 1 << offset); + if (ret < 0) + return ret; + + /* Don't have an atomic direction/value setup */ + wm8350_gpio_set(chip, offset, value); + + return 0; +} + +static int wm8350_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct wm8350_gpio_data *wm8350_gpio = gpiochip_get_data(chip); + struct wm8350 *wm8350 = wm8350_gpio->wm8350; + + if (!wm8350->irq_base) + return -EINVAL; + + return wm8350->irq_base + WM8350_IRQ_GPIO(offset); +} + +static const struct gpio_chip template_chip = { + .label = "wm8350", + .owner = THIS_MODULE, + .direction_input = wm8350_gpio_direction_in, + .get = wm8350_gpio_get, + .direction_output = wm8350_gpio_direction_out, + .set = wm8350_gpio_set, + .to_irq = wm8350_gpio_to_irq, + .can_sleep = true, +}; + +static int wm8350_gpio_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = dev_get_drvdata(pdev->dev.parent); + struct wm8350_platform_data *pdata = dev_get_platdata(wm8350->dev); + struct wm8350_gpio_data *wm8350_gpio; + int ret; + + wm8350_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm8350_gpio), + GFP_KERNEL); + if (wm8350_gpio == NULL) + return -ENOMEM; + + wm8350_gpio->wm8350 = wm8350; + wm8350_gpio->gpio_chip = template_chip; + wm8350_gpio->gpio_chip.ngpio = 13; + wm8350_gpio->gpio_chip.parent = &pdev->dev; + if (pdata && pdata->gpio_base) + wm8350_gpio->gpio_chip.base = pdata->gpio_base; + else + wm8350_gpio->gpio_chip.base = -1; + + ret = devm_gpiochip_add_data(&pdev->dev, &wm8350_gpio->gpio_chip, + wm8350_gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, wm8350_gpio); + + return ret; +} + +static struct platform_driver wm8350_gpio_driver = { + .driver.name = "wm8350-gpio", + .probe = wm8350_gpio_probe, +}; + +static int __init wm8350_gpio_init(void) +{ + return platform_driver_register(&wm8350_gpio_driver); +} +subsys_initcall(wm8350_gpio_init); + +static void __exit wm8350_gpio_exit(void) +{ + platform_driver_unregister(&wm8350_gpio_driver); +} +module_exit(wm8350_gpio_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("GPIO interface for WM8350 PMICs"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8350-gpio"); diff --git a/drivers/gpio/gpio-wm8994.c b/drivers/gpio/gpio-wm8994.c new file mode 100644 index 000000000..1e35756ac --- /dev/null +++ b/drivers/gpio/gpio-wm8994.c @@ -0,0 +1,319 @@ +/* + * gpiolib support for Wolfson WM8994 + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/mfd/core.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/regmap.h> + +#include <linux/mfd/wm8994/core.h> +#include <linux/mfd/wm8994/pdata.h> +#include <linux/mfd/wm8994/gpio.h> +#include <linux/mfd/wm8994/registers.h> + +struct wm8994_gpio { + struct wm8994 *wm8994; + struct gpio_chip gpio_chip; +}; + +static int wm8994_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); + struct wm8994 *wm8994 = wm8994_gpio->wm8994; + + switch (wm8994->type) { + case WM8958: + switch (offset) { + case 1: + case 2: + case 3: + case 4: + case 6: + return -EINVAL; + } + break; + default: + break; + } + + return 0; +} + +static int wm8994_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); + struct wm8994 *wm8994 = wm8994_gpio->wm8994; + + return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, + WM8994_GPN_DIR, WM8994_GPN_DIR); +} + +static int wm8994_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); + struct wm8994 *wm8994 = wm8994_gpio->wm8994; + int ret; + + ret = wm8994_reg_read(wm8994, WM8994_GPIO_1 + offset); + if (ret < 0) + return ret; + + if (ret & WM8994_GPN_LVL) + return 1; + else + return 0; +} + +static int wm8994_gpio_direction_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); + struct wm8994 *wm8994 = wm8994_gpio->wm8994; + + if (value) + value = WM8994_GPN_LVL; + + return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, + WM8994_GPN_DIR | WM8994_GPN_LVL, value); +} + +static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); + struct wm8994 *wm8994 = wm8994_gpio->wm8994; + + if (value) + value = WM8994_GPN_LVL; + + wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, WM8994_GPN_LVL, value); +} + +static int wm8994_gpio_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); + struct wm8994 *wm8994 = wm8994_gpio->wm8994; + + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, + WM8994_GPN_OP_CFG_MASK, + WM8994_GPN_OP_CFG); + case PIN_CONFIG_DRIVE_PUSH_PULL: + return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, + WM8994_GPN_OP_CFG_MASK, 0); + default: + break; + } + + return -ENOTSUPP; +} + +static int wm8994_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); + struct wm8994 *wm8994 = wm8994_gpio->wm8994; + + return regmap_irq_get_virq(wm8994->irq_data, offset); +} + + +#ifdef CONFIG_DEBUG_FS +static const char *wm8994_gpio_fn(u16 fn) +{ + switch (fn) { + case WM8994_GP_FN_PIN_SPECIFIC: + return "pin-specific"; + case WM8994_GP_FN_GPIO: + return "GPIO"; + case WM8994_GP_FN_SDOUT: + return "SDOUT"; + case WM8994_GP_FN_IRQ: + return "IRQ"; + case WM8994_GP_FN_TEMPERATURE: + return "Temperature"; + case WM8994_GP_FN_MICBIAS1_DET: + return "MICBIAS1 detect"; + case WM8994_GP_FN_MICBIAS1_SHORT: + return "MICBIAS1 short"; + case WM8994_GP_FN_MICBIAS2_DET: + return "MICBIAS2 detect"; + case WM8994_GP_FN_MICBIAS2_SHORT: + return "MICBIAS2 short"; + case WM8994_GP_FN_FLL1_LOCK: + return "FLL1 lock"; + case WM8994_GP_FN_FLL2_LOCK: + return "FLL2 lock"; + case WM8994_GP_FN_SRC1_LOCK: + return "SRC1 lock"; + case WM8994_GP_FN_SRC2_LOCK: + return "SRC2 lock"; + case WM8994_GP_FN_DRC1_ACT: + return "DRC1 activity"; + case WM8994_GP_FN_DRC2_ACT: + return "DRC2 activity"; + case WM8994_GP_FN_DRC3_ACT: + return "DRC3 activity"; + case WM8994_GP_FN_WSEQ_STATUS: + return "Write sequencer"; + case WM8994_GP_FN_FIFO_ERROR: + return "FIFO error"; + case WM8994_GP_FN_OPCLK: + return "OPCLK"; + case WM8994_GP_FN_THW: + return "Thermal warning"; + case WM8994_GP_FN_DCS_DONE: + return "DC servo"; + case WM8994_GP_FN_FLL1_OUT: + return "FLL1 output"; + case WM8994_GP_FN_FLL2_OUT: + return "FLL1 output"; + default: + return "Unknown"; + } +} + +static void wm8994_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); + struct wm8994 *wm8994 = wm8994_gpio->wm8994; + int i; + + for (i = 0; i < chip->ngpio; i++) { + int gpio = i + chip->base; + int reg; + const char *label; + + /* We report the GPIO even if it's not requested since + * we're also reporting things like alternate + * functions which apply even when the GPIO is not in + * use as a GPIO. + */ + label = gpiochip_is_requested(chip, i); + if (!label) + label = "Unrequested"; + + seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label); + + reg = wm8994_reg_read(wm8994, WM8994_GPIO_1 + i); + if (reg < 0) { + dev_err(wm8994->dev, + "GPIO control %d read failed: %d\n", + gpio, reg); + seq_printf(s, "\n"); + continue; + } + + if (reg & WM8994_GPN_DIR) + seq_printf(s, "in "); + else + seq_printf(s, "out "); + + if (reg & WM8994_GPN_PU) + seq_printf(s, "pull up "); + + if (reg & WM8994_GPN_PD) + seq_printf(s, "pull down "); + + if (reg & WM8994_GPN_POL) + seq_printf(s, "inverted "); + else + seq_printf(s, "noninverted "); + + if (reg & WM8994_GPN_OP_CFG) + seq_printf(s, "open drain "); + else + seq_printf(s, "push-pull "); + + seq_printf(s, "%s (%x)\n", + wm8994_gpio_fn(reg & WM8994_GPN_FN_MASK), reg); + } +} +#else +#define wm8994_gpio_dbg_show NULL +#endif + +static const struct gpio_chip template_chip = { + .label = "wm8994", + .owner = THIS_MODULE, + .request = wm8994_gpio_request, + .direction_input = wm8994_gpio_direction_in, + .get = wm8994_gpio_get, + .direction_output = wm8994_gpio_direction_out, + .set = wm8994_gpio_set, + .set_config = wm8994_gpio_set_config, + .to_irq = wm8994_gpio_to_irq, + .dbg_show = wm8994_gpio_dbg_show, + .can_sleep = true, +}; + +static int wm8994_gpio_probe(struct platform_device *pdev) +{ + struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent); + struct wm8994_pdata *pdata = dev_get_platdata(wm8994->dev); + struct wm8994_gpio *wm8994_gpio; + int ret; + + wm8994_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm8994_gpio), + GFP_KERNEL); + if (wm8994_gpio == NULL) + return -ENOMEM; + + wm8994_gpio->wm8994 = wm8994; + wm8994_gpio->gpio_chip = template_chip; + wm8994_gpio->gpio_chip.ngpio = WM8994_GPIO_MAX; + wm8994_gpio->gpio_chip.parent = &pdev->dev; + if (pdata && pdata->gpio_base) + wm8994_gpio->gpio_chip.base = pdata->gpio_base; + else + wm8994_gpio->gpio_chip.base = -1; + + ret = devm_gpiochip_add_data(&pdev->dev, &wm8994_gpio->gpio_chip, + wm8994_gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", + ret); + return ret; + } + + platform_set_drvdata(pdev, wm8994_gpio); + + return ret; +} + +static struct platform_driver wm8994_gpio_driver = { + .driver.name = "wm8994-gpio", + .probe = wm8994_gpio_probe, +}; + +static int __init wm8994_gpio_init(void) +{ + return platform_driver_register(&wm8994_gpio_driver); +} +subsys_initcall(wm8994_gpio_init); + +static void __exit wm8994_gpio_exit(void) +{ + platform_driver_unregister(&wm8994_gpio_driver); +} +module_exit(wm8994_gpio_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("GPIO interface for WM8994"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8994-gpio"); diff --git a/drivers/gpio/gpio-ws16c48.c b/drivers/gpio/gpio-ws16c48.c new file mode 100644 index 000000000..c7028eb0b --- /dev/null +++ b/drivers/gpio/gpio-ws16c48.c @@ -0,0 +1,480 @@ +/* + * GPIO driver for the WinSystems WS16C48 + * Copyright (C) 2016 William Breathitt Gray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ +#include <linux/bitmap.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/irqdesc.h> +#include <linux/isa.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> + +#define WS16C48_EXTENT 16 +#define MAX_NUM_WS16C48 max_num_isa_dev(WS16C48_EXTENT) + +static unsigned int base[MAX_NUM_WS16C48]; +static unsigned int num_ws16c48; +module_param_hw_array(base, uint, ioport, &num_ws16c48, 0); +MODULE_PARM_DESC(base, "WinSystems WS16C48 base addresses"); + +static unsigned int irq[MAX_NUM_WS16C48]; +module_param_hw_array(irq, uint, irq, NULL, 0); +MODULE_PARM_DESC(irq, "WinSystems WS16C48 interrupt line numbers"); + +/** + * struct ws16c48_gpio - GPIO device private data structure + * @chip: instance of the gpio_chip + * @io_state: bit I/O state (whether bit is set to input or output) + * @out_state: output bits state + * @lock: synchronization lock to prevent I/O race conditions + * @irq_mask: I/O bits affected by interrupts + * @flow_mask: IRQ flow type mask for the respective I/O bits + * @base: base port address of the GPIO device + */ +struct ws16c48_gpio { + struct gpio_chip chip; + unsigned char io_state[6]; + unsigned char out_state[6]; + raw_spinlock_t lock; + unsigned long irq_mask; + unsigned long flow_mask; + unsigned base; +}; + +static int ws16c48_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip); + const unsigned port = offset / 8; + const unsigned mask = BIT(offset % 8); + + return !!(ws16c48gpio->io_state[port] & mask); +} + +static int ws16c48_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip); + const unsigned port = offset / 8; + const unsigned mask = BIT(offset % 8); + unsigned long flags; + + raw_spin_lock_irqsave(&ws16c48gpio->lock, flags); + + ws16c48gpio->io_state[port] |= mask; + ws16c48gpio->out_state[port] &= ~mask; + outb(ws16c48gpio->out_state[port], ws16c48gpio->base + port); + + raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags); + + return 0; +} + +static int ws16c48_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip); + const unsigned port = offset / 8; + const unsigned mask = BIT(offset % 8); + unsigned long flags; + + raw_spin_lock_irqsave(&ws16c48gpio->lock, flags); + + ws16c48gpio->io_state[port] &= ~mask; + if (value) + ws16c48gpio->out_state[port] |= mask; + else + ws16c48gpio->out_state[port] &= ~mask; + outb(ws16c48gpio->out_state[port], ws16c48gpio->base + port); + + raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags); + + return 0; +} + +static int ws16c48_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip); + const unsigned port = offset / 8; + const unsigned mask = BIT(offset % 8); + unsigned long flags; + unsigned port_state; + + raw_spin_lock_irqsave(&ws16c48gpio->lock, flags); + + /* ensure that GPIO is set for input */ + if (!(ws16c48gpio->io_state[port] & mask)) { + raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags); + return -EINVAL; + } + + port_state = inb(ws16c48gpio->base + port); + + raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags); + + return !!(port_state & mask); +} + +static int ws16c48_gpio_get_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip); + const unsigned int gpio_reg_size = 8; + size_t i; + const size_t num_ports = chip->ngpio / gpio_reg_size; + unsigned int bits_offset; + size_t word_index; + unsigned int word_offset; + unsigned long word_mask; + const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0); + unsigned long port_state; + + /* clear bits array to a clean slate */ + bitmap_zero(bits, chip->ngpio); + + /* get bits are evaluated a gpio port register at a time */ + for (i = 0; i < num_ports; i++) { + /* gpio offset in bits array */ + bits_offset = i * gpio_reg_size; + + /* word index for bits array */ + word_index = BIT_WORD(bits_offset); + + /* gpio offset within current word of bits array */ + word_offset = bits_offset % BITS_PER_LONG; + + /* mask of get bits for current gpio within current word */ + word_mask = mask[word_index] & (port_mask << word_offset); + if (!word_mask) { + /* no get bits in this port so skip to next one */ + continue; + } + + /* read bits from current gpio port */ + port_state = inb(ws16c48gpio->base + i); + + /* store acquired bits at respective bits array offset */ + bits[word_index] |= port_state << word_offset; + } + + return 0; +} + +static void ws16c48_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip); + const unsigned port = offset / 8; + const unsigned mask = BIT(offset % 8); + unsigned long flags; + + raw_spin_lock_irqsave(&ws16c48gpio->lock, flags); + + /* ensure that GPIO is set for output */ + if (ws16c48gpio->io_state[port] & mask) { + raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags); + return; + } + + if (value) + ws16c48gpio->out_state[port] |= mask; + else + ws16c48gpio->out_state[port] &= ~mask; + outb(ws16c48gpio->out_state[port], ws16c48gpio->base + port); + + raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags); +} + +static void ws16c48_gpio_set_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip); + unsigned int i; + const unsigned int gpio_reg_size = 8; + unsigned int port; + unsigned int iomask; + unsigned int bitmask; + unsigned long flags; + + /* set bits are evaluated a gpio register size at a time */ + for (i = 0; i < chip->ngpio; i += gpio_reg_size) { + /* no more set bits in this mask word; skip to the next word */ + if (!mask[BIT_WORD(i)]) { + i = (BIT_WORD(i) + 1) * BITS_PER_LONG - gpio_reg_size; + continue; + } + + port = i / gpio_reg_size; + + /* mask out GPIO configured for input */ + iomask = mask[BIT_WORD(i)] & ~ws16c48gpio->io_state[port]; + bitmask = iomask & bits[BIT_WORD(i)]; + + raw_spin_lock_irqsave(&ws16c48gpio->lock, flags); + + /* update output state data and set device gpio register */ + ws16c48gpio->out_state[port] &= ~iomask; + ws16c48gpio->out_state[port] |= bitmask; + outb(ws16c48gpio->out_state[port], ws16c48gpio->base + port); + + raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags); + + /* prepare for next gpio register set */ + mask[BIT_WORD(i)] >>= gpio_reg_size; + bits[BIT_WORD(i)] >>= gpio_reg_size; + } +} + +static void ws16c48_irq_ack(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip); + const unsigned long offset = irqd_to_hwirq(data); + const unsigned port = offset / 8; + const unsigned mask = BIT(offset % 8); + unsigned long flags; + unsigned port_state; + + /* only the first 3 ports support interrupts */ + if (port > 2) + return; + + raw_spin_lock_irqsave(&ws16c48gpio->lock, flags); + + port_state = ws16c48gpio->irq_mask >> (8*port); + + outb(0x80, ws16c48gpio->base + 7); + outb(port_state & ~mask, ws16c48gpio->base + 8 + port); + outb(port_state | mask, ws16c48gpio->base + 8 + port); + outb(0xC0, ws16c48gpio->base + 7); + + raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags); +} + +static void ws16c48_irq_mask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip); + const unsigned long offset = irqd_to_hwirq(data); + const unsigned long mask = BIT(offset); + const unsigned port = offset / 8; + unsigned long flags; + + /* only the first 3 ports support interrupts */ + if (port > 2) + return; + + raw_spin_lock_irqsave(&ws16c48gpio->lock, flags); + + ws16c48gpio->irq_mask &= ~mask; + + outb(0x80, ws16c48gpio->base + 7); + outb(ws16c48gpio->irq_mask >> (8*port), ws16c48gpio->base + 8 + port); + outb(0xC0, ws16c48gpio->base + 7); + + raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags); +} + +static void ws16c48_irq_unmask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip); + const unsigned long offset = irqd_to_hwirq(data); + const unsigned long mask = BIT(offset); + const unsigned port = offset / 8; + unsigned long flags; + + /* only the first 3 ports support interrupts */ + if (port > 2) + return; + + raw_spin_lock_irqsave(&ws16c48gpio->lock, flags); + + ws16c48gpio->irq_mask |= mask; + + outb(0x80, ws16c48gpio->base + 7); + outb(ws16c48gpio->irq_mask >> (8*port), ws16c48gpio->base + 8 + port); + outb(0xC0, ws16c48gpio->base + 7); + + raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags); +} + +static int ws16c48_irq_set_type(struct irq_data *data, unsigned flow_type) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip); + const unsigned long offset = irqd_to_hwirq(data); + const unsigned long mask = BIT(offset); + const unsigned port = offset / 8; + unsigned long flags; + + /* only the first 3 ports support interrupts */ + if (port > 2) + return -EINVAL; + + raw_spin_lock_irqsave(&ws16c48gpio->lock, flags); + + switch (flow_type) { + case IRQ_TYPE_NONE: + break; + case IRQ_TYPE_EDGE_RISING: + ws16c48gpio->flow_mask |= mask; + break; + case IRQ_TYPE_EDGE_FALLING: + ws16c48gpio->flow_mask &= ~mask; + break; + default: + raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags); + return -EINVAL; + } + + outb(0x40, ws16c48gpio->base + 7); + outb(ws16c48gpio->flow_mask >> (8*port), ws16c48gpio->base + 8 + port); + outb(0xC0, ws16c48gpio->base + 7); + + raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags); + + return 0; +} + +static struct irq_chip ws16c48_irqchip = { + .name = "ws16c48", + .irq_ack = ws16c48_irq_ack, + .irq_mask = ws16c48_irq_mask, + .irq_unmask = ws16c48_irq_unmask, + .irq_set_type = ws16c48_irq_set_type +}; + +static irqreturn_t ws16c48_irq_handler(int irq, void *dev_id) +{ + struct ws16c48_gpio *const ws16c48gpio = dev_id; + struct gpio_chip *const chip = &ws16c48gpio->chip; + unsigned long int_pending; + unsigned long port; + unsigned long int_id; + unsigned long gpio; + + int_pending = inb(ws16c48gpio->base + 6) & 0x7; + if (!int_pending) + return IRQ_NONE; + + /* loop until all pending interrupts are handled */ + do { + for_each_set_bit(port, &int_pending, 3) { + int_id = inb(ws16c48gpio->base + 8 + port); + for_each_set_bit(gpio, &int_id, 8) + generic_handle_irq(irq_find_mapping( + chip->irq.domain, gpio + 8*port)); + } + + int_pending = inb(ws16c48gpio->base + 6) & 0x7; + } while (int_pending); + + return IRQ_HANDLED; +} + +#define WS16C48_NGPIO 48 +static const char *ws16c48_names[WS16C48_NGPIO] = { + "Port 0 Bit 0", "Port 0 Bit 1", "Port 0 Bit 2", "Port 0 Bit 3", + "Port 0 Bit 4", "Port 0 Bit 5", "Port 0 Bit 6", "Port 0 Bit 7", + "Port 1 Bit 0", "Port 1 Bit 1", "Port 1 Bit 2", "Port 1 Bit 3", + "Port 1 Bit 4", "Port 1 Bit 5", "Port 1 Bit 6", "Port 1 Bit 7", + "Port 2 Bit 0", "Port 2 Bit 1", "Port 2 Bit 2", "Port 2 Bit 3", + "Port 2 Bit 4", "Port 2 Bit 5", "Port 2 Bit 6", "Port 2 Bit 7", + "Port 3 Bit 0", "Port 3 Bit 1", "Port 3 Bit 2", "Port 3 Bit 3", + "Port 3 Bit 4", "Port 3 Bit 5", "Port 3 Bit 6", "Port 3 Bit 7", + "Port 4 Bit 0", "Port 4 Bit 1", "Port 4 Bit 2", "Port 4 Bit 3", + "Port 4 Bit 4", "Port 4 Bit 5", "Port 4 Bit 6", "Port 4 Bit 7", + "Port 5 Bit 0", "Port 5 Bit 1", "Port 5 Bit 2", "Port 5 Bit 3", + "Port 5 Bit 4", "Port 5 Bit 5", "Port 5 Bit 6", "Port 5 Bit 7" +}; + +static int ws16c48_probe(struct device *dev, unsigned int id) +{ + struct ws16c48_gpio *ws16c48gpio; + const char *const name = dev_name(dev); + int err; + + ws16c48gpio = devm_kzalloc(dev, sizeof(*ws16c48gpio), GFP_KERNEL); + if (!ws16c48gpio) + return -ENOMEM; + + if (!devm_request_region(dev, base[id], WS16C48_EXTENT, name)) { + dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", + base[id], base[id] + WS16C48_EXTENT); + return -EBUSY; + } + + ws16c48gpio->chip.label = name; + ws16c48gpio->chip.parent = dev; + ws16c48gpio->chip.owner = THIS_MODULE; + ws16c48gpio->chip.base = -1; + ws16c48gpio->chip.ngpio = WS16C48_NGPIO; + ws16c48gpio->chip.names = ws16c48_names; + ws16c48gpio->chip.get_direction = ws16c48_gpio_get_direction; + ws16c48gpio->chip.direction_input = ws16c48_gpio_direction_input; + ws16c48gpio->chip.direction_output = ws16c48_gpio_direction_output; + ws16c48gpio->chip.get = ws16c48_gpio_get; + ws16c48gpio->chip.get_multiple = ws16c48_gpio_get_multiple; + ws16c48gpio->chip.set = ws16c48_gpio_set; + ws16c48gpio->chip.set_multiple = ws16c48_gpio_set_multiple; + ws16c48gpio->base = base[id]; + + raw_spin_lock_init(&ws16c48gpio->lock); + + err = devm_gpiochip_add_data(dev, &ws16c48gpio->chip, ws16c48gpio); + if (err) { + dev_err(dev, "GPIO registering failed (%d)\n", err); + return err; + } + + /* Disable IRQ by default */ + outb(0x80, base[id] + 7); + outb(0, base[id] + 8); + outb(0, base[id] + 9); + outb(0, base[id] + 10); + outb(0xC0, base[id] + 7); + + err = gpiochip_irqchip_add(&ws16c48gpio->chip, &ws16c48_irqchip, 0, + handle_edge_irq, IRQ_TYPE_NONE); + if (err) { + dev_err(dev, "Could not add irqchip (%d)\n", err); + return err; + } + + err = devm_request_irq(dev, irq[id], ws16c48_irq_handler, IRQF_SHARED, + name, ws16c48gpio); + if (err) { + dev_err(dev, "IRQ handler registering failed (%d)\n", err); + return err; + } + + return 0; +} + +static struct isa_driver ws16c48_driver = { + .probe = ws16c48_probe, + .driver = { + .name = "ws16c48" + }, +}; + +module_isa_driver(ws16c48_driver, num_ws16c48); + +MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); +MODULE_DESCRIPTION("WinSystems WS16C48 GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-xgene-sb.c b/drivers/gpio/gpio-xgene-sb.c new file mode 100644 index 000000000..2eb76f35a --- /dev/null +++ b/drivers/gpio/gpio-xgene-sb.c @@ -0,0 +1,354 @@ +/* + * AppliedMicro X-Gene SoC GPIO-Standby Driver + * + * Copyright (c) 2014, Applied Micro Circuits Corporation + * Author: Tin Huynh <tnhuynh@apm.com>. + * Y Vo <yvo@apm.com>. + * Quan Nguyen <qnguyen@apm.com>. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/of_gpio.h> +#include <linux/gpio/driver.h> +#include <linux/acpi.h> + +#include "gpiolib.h" + +/* Common property names */ +#define XGENE_NIRQ_PROPERTY "apm,nr-irqs" +#define XGENE_NGPIO_PROPERTY "apm,nr-gpios" +#define XGENE_IRQ_START_PROPERTY "apm,irq-start" + +#define XGENE_DFLT_MAX_NGPIO 22 +#define XGENE_DFLT_MAX_NIRQ 6 +#define XGENE_DFLT_IRQ_START_PIN 8 +#define GPIO_MASK(x) (1U << ((x) % 32)) + +#define MPA_GPIO_INT_LVL 0x0290 +#define MPA_GPIO_OE_ADDR 0x029c +#define MPA_GPIO_OUT_ADDR 0x02a0 +#define MPA_GPIO_IN_ADDR 0x02a4 +#define MPA_GPIO_SEL_LO 0x0294 + +#define GPIO_INT_LEVEL_H 0x000001 +#define GPIO_INT_LEVEL_L 0x000000 + +/** + * struct xgene_gpio_sb - GPIO-Standby private data structure. + * @gc: memory-mapped GPIO controllers. + * @regs: GPIO register base offset + * @irq_domain: GPIO interrupt domain + * @irq_start: GPIO pin that start support interrupt + * @nirq: Number of GPIO pins that supports interrupt + * @parent_irq_base: Start parent HWIRQ + */ +struct xgene_gpio_sb { + struct gpio_chip gc; + void __iomem *regs; + struct irq_domain *irq_domain; + u16 irq_start; + u16 nirq; + u16 parent_irq_base; +}; + +#define HWIRQ_TO_GPIO(priv, hwirq) ((hwirq) + (priv)->irq_start) +#define GPIO_TO_HWIRQ(priv, gpio) ((gpio) - (priv)->irq_start) + +static void xgene_gpio_set_bit(struct gpio_chip *gc, + void __iomem *reg, u32 gpio, int val) +{ + u32 data; + + data = gc->read_reg(reg); + if (val) + data |= GPIO_MASK(gpio); + else + data &= ~GPIO_MASK(gpio); + gc->write_reg(reg, data); +} + +static int xgene_gpio_sb_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct xgene_gpio_sb *priv = irq_data_get_irq_chip_data(d); + int gpio = HWIRQ_TO_GPIO(priv, d->hwirq); + int lvl_type = GPIO_INT_LEVEL_H; + + switch (type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_LEVEL_HIGH: + lvl_type = GPIO_INT_LEVEL_H; + break; + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_LEVEL_LOW: + lvl_type = GPIO_INT_LEVEL_L; + break; + default: + break; + } + + xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO, + gpio * 2, 1); + xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_INT_LVL, + d->hwirq, lvl_type); + + /* Propagate IRQ type setting to parent */ + if (type & IRQ_TYPE_EDGE_BOTH) + return irq_chip_set_type_parent(d, IRQ_TYPE_EDGE_RISING); + else + return irq_chip_set_type_parent(d, IRQ_TYPE_LEVEL_HIGH); +} + +static struct irq_chip xgene_gpio_sb_irq_chip = { + .name = "sbgpio", + .irq_eoi = irq_chip_eoi_parent, + .irq_mask = irq_chip_mask_parent, + .irq_unmask = irq_chip_unmask_parent, + .irq_set_type = xgene_gpio_sb_irq_set_type, +}; + +static int xgene_gpio_sb_to_irq(struct gpio_chip *gc, u32 gpio) +{ + struct xgene_gpio_sb *priv = gpiochip_get_data(gc); + struct irq_fwspec fwspec; + + if ((gpio < priv->irq_start) || + (gpio > HWIRQ_TO_GPIO(priv, priv->nirq))) + return -ENXIO; + + fwspec.fwnode = gc->parent->fwnode; + fwspec.param_count = 2; + fwspec.param[0] = GPIO_TO_HWIRQ(priv, gpio); + fwspec.param[1] = IRQ_TYPE_NONE; + return irq_create_fwspec_mapping(&fwspec); +} + +static int xgene_gpio_sb_domain_activate(struct irq_domain *d, + struct irq_data *irq_data, + bool reserve) +{ + struct xgene_gpio_sb *priv = d->host_data; + u32 gpio = HWIRQ_TO_GPIO(priv, irq_data->hwirq); + int ret; + + ret = gpiochip_lock_as_irq(&priv->gc, gpio); + if (ret) { + dev_err(priv->gc.parent, + "Unable to configure XGene GPIO standby pin %d as IRQ\n", + gpio); + return ret; + } + + xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO, + gpio * 2, 1); + return 0; +} + +static void xgene_gpio_sb_domain_deactivate(struct irq_domain *d, + struct irq_data *irq_data) +{ + struct xgene_gpio_sb *priv = d->host_data; + u32 gpio = HWIRQ_TO_GPIO(priv, irq_data->hwirq); + + gpiochip_unlock_as_irq(&priv->gc, gpio); + xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO, + gpio * 2, 0); +} + +static int xgene_gpio_sb_domain_translate(struct irq_domain *d, + struct irq_fwspec *fwspec, + unsigned long *hwirq, + unsigned int *type) +{ + struct xgene_gpio_sb *priv = d->host_data; + + if ((fwspec->param_count != 2) || + (fwspec->param[0] >= priv->nirq)) + return -EINVAL; + *hwirq = fwspec->param[0]; + *type = fwspec->param[1]; + return 0; +} + +static int xgene_gpio_sb_domain_alloc(struct irq_domain *domain, + unsigned int virq, + unsigned int nr_irqs, void *data) +{ + struct irq_fwspec *fwspec = data; + struct irq_fwspec parent_fwspec; + struct xgene_gpio_sb *priv = domain->host_data; + irq_hw_number_t hwirq; + unsigned int i; + + hwirq = fwspec->param[0]; + for (i = 0; i < nr_irqs; i++) + irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, + &xgene_gpio_sb_irq_chip, priv); + + parent_fwspec.fwnode = domain->parent->fwnode; + if (is_of_node(parent_fwspec.fwnode)) { + parent_fwspec.param_count = 3; + parent_fwspec.param[0] = 0;/* SPI */ + /* Skip SGIs and PPIs*/ + parent_fwspec.param[1] = hwirq + priv->parent_irq_base - 32; + parent_fwspec.param[2] = fwspec->param[1]; + } else if (is_fwnode_irqchip(parent_fwspec.fwnode)) { + parent_fwspec.param_count = 2; + parent_fwspec.param[0] = hwirq + priv->parent_irq_base; + parent_fwspec.param[1] = fwspec->param[1]; + } else + return -EINVAL; + + return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, + &parent_fwspec); +} + +static const struct irq_domain_ops xgene_gpio_sb_domain_ops = { + .translate = xgene_gpio_sb_domain_translate, + .alloc = xgene_gpio_sb_domain_alloc, + .free = irq_domain_free_irqs_common, + .activate = xgene_gpio_sb_domain_activate, + .deactivate = xgene_gpio_sb_domain_deactivate, +}; + +static int xgene_gpio_sb_probe(struct platform_device *pdev) +{ + struct xgene_gpio_sb *priv; + int ret; + struct resource *res; + void __iomem *regs; + struct irq_domain *parent_domain = NULL; + u32 val32; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + priv->regs = regs; + + ret = platform_get_irq(pdev, 0); + if (ret > 0) { + priv->parent_irq_base = irq_get_irq_data(ret)->hwirq; + parent_domain = irq_get_irq_data(ret)->domain; + } + if (!parent_domain) { + dev_err(&pdev->dev, "unable to obtain parent domain\n"); + return -ENODEV; + } + + ret = bgpio_init(&priv->gc, &pdev->dev, 4, + regs + MPA_GPIO_IN_ADDR, + regs + MPA_GPIO_OUT_ADDR, NULL, + regs + MPA_GPIO_OE_ADDR, NULL, 0); + if (ret) + return ret; + + priv->gc.to_irq = xgene_gpio_sb_to_irq; + + /* Retrieve start irq pin, use default if property not found */ + priv->irq_start = XGENE_DFLT_IRQ_START_PIN; + if (!device_property_read_u32(&pdev->dev, + XGENE_IRQ_START_PROPERTY, &val32)) + priv->irq_start = val32; + + /* Retrieve number irqs, use default if property not found */ + priv->nirq = XGENE_DFLT_MAX_NIRQ; + if (!device_property_read_u32(&pdev->dev, XGENE_NIRQ_PROPERTY, &val32)) + priv->nirq = val32; + + /* Retrieve number gpio, use default if property not found */ + priv->gc.ngpio = XGENE_DFLT_MAX_NGPIO; + if (!device_property_read_u32(&pdev->dev, XGENE_NGPIO_PROPERTY, &val32)) + priv->gc.ngpio = val32; + + dev_info(&pdev->dev, "Support %d gpios, %d irqs start from pin %d\n", + priv->gc.ngpio, priv->nirq, priv->irq_start); + + platform_set_drvdata(pdev, priv); + + priv->irq_domain = irq_domain_create_hierarchy(parent_domain, + 0, priv->nirq, pdev->dev.fwnode, + &xgene_gpio_sb_domain_ops, priv); + if (!priv->irq_domain) + return -ENODEV; + + priv->gc.irq.domain = priv->irq_domain; + + ret = devm_gpiochip_add_data(&pdev->dev, &priv->gc, priv); + if (ret) { + dev_err(&pdev->dev, + "failed to register X-Gene GPIO Standby driver\n"); + irq_domain_remove(priv->irq_domain); + return ret; + } + + dev_info(&pdev->dev, "X-Gene GPIO Standby driver registered\n"); + + if (priv->nirq > 0) { + /* Register interrupt handlers for gpio signaled acpi events */ + acpi_gpiochip_request_interrupts(&priv->gc); + } + + return ret; +} + +static int xgene_gpio_sb_remove(struct platform_device *pdev) +{ + struct xgene_gpio_sb *priv = platform_get_drvdata(pdev); + + if (priv->nirq > 0) { + acpi_gpiochip_free_interrupts(&priv->gc); + } + + irq_domain_remove(priv->irq_domain); + + return 0; +} + +static const struct of_device_id xgene_gpio_sb_of_match[] = { + {.compatible = "apm,xgene-gpio-sb", }, + {}, +}; +MODULE_DEVICE_TABLE(of, xgene_gpio_sb_of_match); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id xgene_gpio_sb_acpi_match[] = { + {"APMC0D15", 0}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, xgene_gpio_sb_acpi_match); +#endif + +static struct platform_driver xgene_gpio_sb_driver = { + .driver = { + .name = "xgene-gpio-sb", + .of_match_table = xgene_gpio_sb_of_match, + .acpi_match_table = ACPI_PTR(xgene_gpio_sb_acpi_match), + }, + .probe = xgene_gpio_sb_probe, + .remove = xgene_gpio_sb_remove, +}; +module_platform_driver(xgene_gpio_sb_driver); + +MODULE_AUTHOR("AppliedMicro"); +MODULE_DESCRIPTION("APM X-Gene GPIO Standby driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-xgene.c b/drivers/gpio/gpio-xgene.c new file mode 100644 index 000000000..f1c6ec17b --- /dev/null +++ b/drivers/gpio/gpio-xgene.c @@ -0,0 +1,241 @@ +/* + * AppliedMicro X-Gene SoC GPIO Driver + * + * Copyright (c) 2014, Applied Micro Circuits Corporation + * Author: Feng Kan <fkan@apm.com>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/acpi.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/gpio/driver.h> +#include <linux/types.h> +#include <linux/bitops.h> + +#define GPIO_SET_DR_OFFSET 0x0C +#define GPIO_DATA_OFFSET 0x14 +#define GPIO_BANK_STRIDE 0x0C + +#define XGENE_GPIOS_PER_BANK 16 +#define XGENE_MAX_GPIO_BANKS 3 +#define XGENE_MAX_GPIOS (XGENE_GPIOS_PER_BANK * XGENE_MAX_GPIO_BANKS) + +#define GPIO_BIT_OFFSET(x) (x % XGENE_GPIOS_PER_BANK) +#define GPIO_BANK_OFFSET(x) ((x / XGENE_GPIOS_PER_BANK) * GPIO_BANK_STRIDE) + +struct xgene_gpio { + struct gpio_chip chip; + void __iomem *base; + spinlock_t lock; + u32 set_dr_val[XGENE_MAX_GPIO_BANKS]; +}; + +static int xgene_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct xgene_gpio *chip = gpiochip_get_data(gc); + unsigned long bank_offset; + u32 bit_offset; + + bank_offset = GPIO_DATA_OFFSET + GPIO_BANK_OFFSET(offset); + bit_offset = GPIO_BIT_OFFSET(offset); + return !!(ioread32(chip->base + bank_offset) & BIT(bit_offset)); +} + +static void __xgene_gpio_set(struct gpio_chip *gc, unsigned int offset, int val) +{ + struct xgene_gpio *chip = gpiochip_get_data(gc); + unsigned long bank_offset; + u32 setval, bit_offset; + + bank_offset = GPIO_SET_DR_OFFSET + GPIO_BANK_OFFSET(offset); + bit_offset = GPIO_BIT_OFFSET(offset) + XGENE_GPIOS_PER_BANK; + + setval = ioread32(chip->base + bank_offset); + if (val) + setval |= BIT(bit_offset); + else + setval &= ~BIT(bit_offset); + iowrite32(setval, chip->base + bank_offset); +} + +static void xgene_gpio_set(struct gpio_chip *gc, unsigned int offset, int val) +{ + struct xgene_gpio *chip = gpiochip_get_data(gc); + unsigned long flags; + + spin_lock_irqsave(&chip->lock, flags); + __xgene_gpio_set(gc, offset, val); + spin_unlock_irqrestore(&chip->lock, flags); +} + +static int xgene_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + struct xgene_gpio *chip = gpiochip_get_data(gc); + unsigned long bank_offset, bit_offset; + + bank_offset = GPIO_SET_DR_OFFSET + GPIO_BANK_OFFSET(offset); + bit_offset = GPIO_BIT_OFFSET(offset); + + return !!(ioread32(chip->base + bank_offset) & BIT(bit_offset)); +} + +static int xgene_gpio_dir_in(struct gpio_chip *gc, unsigned int offset) +{ + struct xgene_gpio *chip = gpiochip_get_data(gc); + unsigned long flags, bank_offset; + u32 dirval, bit_offset; + + bank_offset = GPIO_SET_DR_OFFSET + GPIO_BANK_OFFSET(offset); + bit_offset = GPIO_BIT_OFFSET(offset); + + spin_lock_irqsave(&chip->lock, flags); + + dirval = ioread32(chip->base + bank_offset); + dirval |= BIT(bit_offset); + iowrite32(dirval, chip->base + bank_offset); + + spin_unlock_irqrestore(&chip->lock, flags); + + return 0; +} + +static int xgene_gpio_dir_out(struct gpio_chip *gc, + unsigned int offset, int val) +{ + struct xgene_gpio *chip = gpiochip_get_data(gc); + unsigned long flags, bank_offset; + u32 dirval, bit_offset; + + bank_offset = GPIO_SET_DR_OFFSET + GPIO_BANK_OFFSET(offset); + bit_offset = GPIO_BIT_OFFSET(offset); + + spin_lock_irqsave(&chip->lock, flags); + + dirval = ioread32(chip->base + bank_offset); + dirval &= ~BIT(bit_offset); + iowrite32(dirval, chip->base + bank_offset); + __xgene_gpio_set(gc, offset, val); + + spin_unlock_irqrestore(&chip->lock, flags); + + return 0; +} + +static __maybe_unused int xgene_gpio_suspend(struct device *dev) +{ + struct xgene_gpio *gpio = dev_get_drvdata(dev); + unsigned long bank_offset; + unsigned int bank; + + for (bank = 0; bank < XGENE_MAX_GPIO_BANKS; bank++) { + bank_offset = GPIO_SET_DR_OFFSET + bank * GPIO_BANK_STRIDE; + gpio->set_dr_val[bank] = ioread32(gpio->base + bank_offset); + } + return 0; +} + +static __maybe_unused int xgene_gpio_resume(struct device *dev) +{ + struct xgene_gpio *gpio = dev_get_drvdata(dev); + unsigned long bank_offset; + unsigned int bank; + + for (bank = 0; bank < XGENE_MAX_GPIO_BANKS; bank++) { + bank_offset = GPIO_SET_DR_OFFSET + bank * GPIO_BANK_STRIDE; + iowrite32(gpio->set_dr_val[bank], gpio->base + bank_offset); + } + return 0; +} + +static SIMPLE_DEV_PM_OPS(xgene_gpio_pm, xgene_gpio_suspend, xgene_gpio_resume); + +static int xgene_gpio_probe(struct platform_device *pdev) +{ + struct resource *res; + struct xgene_gpio *gpio; + int err = 0; + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) { + err = -ENOMEM; + goto err; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + err = -EINVAL; + goto err; + } + + gpio->base = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!gpio->base) { + err = -ENOMEM; + goto err; + } + + gpio->chip.ngpio = XGENE_MAX_GPIOS; + + spin_lock_init(&gpio->lock); + gpio->chip.parent = &pdev->dev; + gpio->chip.get_direction = xgene_gpio_get_direction; + gpio->chip.direction_input = xgene_gpio_dir_in; + gpio->chip.direction_output = xgene_gpio_dir_out; + gpio->chip.get = xgene_gpio_get; + gpio->chip.set = xgene_gpio_set; + gpio->chip.label = dev_name(&pdev->dev); + gpio->chip.base = -1; + + platform_set_drvdata(pdev, gpio); + + err = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); + if (err) { + dev_err(&pdev->dev, + "failed to register gpiochip.\n"); + goto err; + } + + dev_info(&pdev->dev, "X-Gene GPIO driver registered.\n"); + return 0; +err: + dev_err(&pdev->dev, "X-Gene GPIO driver registration failed.\n"); + return err; +} + +static const struct of_device_id xgene_gpio_of_match[] = { + { .compatible = "apm,xgene-gpio", }, + {}, +}; + +#ifdef CONFIG_ACPI +static const struct acpi_device_id xgene_gpio_acpi_match[] = { + { "APMC0D14", 0 }, + { }, +}; +#endif + +static struct platform_driver xgene_gpio_driver = { + .driver = { + .name = "xgene-gpio", + .of_match_table = xgene_gpio_of_match, + .acpi_match_table = ACPI_PTR(xgene_gpio_acpi_match), + .pm = &xgene_gpio_pm, + }, + .probe = xgene_gpio_probe, +}; +builtin_platform_driver(xgene_gpio_driver); diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c new file mode 100644 index 000000000..8f24478cc --- /dev/null +++ b/drivers/gpio/gpio-xilinx.c @@ -0,0 +1,402 @@ +/* + * Xilinx gpio driver for xps/axi_gpio IP. + * + * Copyright 2008 - 2013 Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/bitops.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> +#include <linux/io.h> +#include <linux/gpio/driver.h> +#include <linux/slab.h> + +/* Register Offset Definitions */ +#define XGPIO_DATA_OFFSET (0x0) /* Data register */ +#define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */ + +#define XGPIO_CHANNEL_OFFSET 0x8 + +/* Read/Write access to the GPIO registers */ +#if defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_X86) +# define xgpio_readreg(offset) readl(offset) +# define xgpio_writereg(offset, val) writel(val, offset) +#else +# define xgpio_readreg(offset) __raw_readl(offset) +# define xgpio_writereg(offset, val) __raw_writel(val, offset) +#endif + +/** + * struct xgpio_instance - Stores information about GPIO device + * @mmchip: OF GPIO chip for memory mapped banks + * @gpio_width: GPIO width for every channel + * @gpio_state: GPIO state shadow register + * @gpio_dir: GPIO direction shadow register + * @gpio_lock: Lock used for synchronization + */ +struct xgpio_instance { + struct of_mm_gpio_chip mmchip; + unsigned int gpio_width[2]; + u32 gpio_state[2]; + u32 gpio_dir[2]; + spinlock_t gpio_lock[2]; +}; + +static inline int xgpio_index(struct xgpio_instance *chip, int gpio) +{ + if (gpio >= chip->gpio_width[0]) + return 1; + + return 0; +} + +static inline int xgpio_regoffset(struct xgpio_instance *chip, int gpio) +{ + if (xgpio_index(chip, gpio)) + return XGPIO_CHANNEL_OFFSET; + + return 0; +} + +static inline int xgpio_offset(struct xgpio_instance *chip, int gpio) +{ + if (xgpio_index(chip, gpio)) + return gpio - chip->gpio_width[0]; + + return gpio; +} + +/** + * xgpio_get - Read the specified signal of the GPIO device. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * This function reads the specified signal of the GPIO device. + * + * Return: + * 0 if direction of GPIO signals is set as input otherwise it + * returns negative error value. + */ +static int xgpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = gpiochip_get_data(gc); + u32 val; + + val = xgpio_readreg(mm_gc->regs + XGPIO_DATA_OFFSET + + xgpio_regoffset(chip, gpio)); + + return !!(val & BIT(xgpio_offset(chip, gpio))); +} + +/** + * xgpio_set - Write the specified signal of the GPIO device. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * This function writes the specified value in to the specified signal of the + * GPIO device. + */ +static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = gpiochip_get_data(gc); + int index = xgpio_index(chip, gpio); + int offset = xgpio_offset(chip, gpio); + + spin_lock_irqsave(&chip->gpio_lock[index], flags); + + /* Write to GPIO signal and set its direction to output */ + if (val) + chip->gpio_state[index] |= BIT(offset); + else + chip->gpio_state[index] &= ~BIT(offset); + + xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + + xgpio_regoffset(chip, gpio), chip->gpio_state[index]); + + spin_unlock_irqrestore(&chip->gpio_lock[index], flags); +} + +/** + * xgpio_set_multiple - Write the specified signals of the GPIO device. + * @gc: Pointer to gpio_chip device structure. + * @mask: Mask of the GPIOS to modify. + * @bits: Value to be wrote on each GPIO + * + * This function writes the specified values into the specified signals of the + * GPIO devices. + */ +static void xgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = gpiochip_get_data(gc); + int index = xgpio_index(chip, 0); + int offset, i; + + spin_lock_irqsave(&chip->gpio_lock[index], flags); + + /* Write to GPIO signals */ + for (i = 0; i < gc->ngpio; i++) { + if (*mask == 0) + break; + if (index != xgpio_index(chip, i)) { + xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + + xgpio_regoffset(chip, i), + chip->gpio_state[index]); + spin_unlock_irqrestore(&chip->gpio_lock[index], flags); + index = xgpio_index(chip, i); + spin_lock_irqsave(&chip->gpio_lock[index], flags); + } + if (__test_and_clear_bit(i, mask)) { + offset = xgpio_offset(chip, i); + if (test_bit(i, bits)) + chip->gpio_state[index] |= BIT(offset); + else + chip->gpio_state[index] &= ~BIT(offset); + } + } + + xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + + xgpio_regoffset(chip, i), chip->gpio_state[index]); + + spin_unlock_irqrestore(&chip->gpio_lock[index], flags); +} + +/** + * xgpio_dir_in - Set the direction of the specified GPIO signal as input. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * Return: + * 0 - if direction of GPIO signals is set as input + * otherwise it returns negative error value. + */ +static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = gpiochip_get_data(gc); + int index = xgpio_index(chip, gpio); + int offset = xgpio_offset(chip, gpio); + + spin_lock_irqsave(&chip->gpio_lock[index], flags); + + /* Set the GPIO bit in shadow register and set direction as input */ + chip->gpio_dir[index] |= BIT(offset); + xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET + + xgpio_regoffset(chip, gpio), chip->gpio_dir[index]); + + spin_unlock_irqrestore(&chip->gpio_lock[index], flags); + + return 0; +} + +/** + * xgpio_dir_out - Set the direction of the specified GPIO signal as output. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * This function sets the direction of specified GPIO signal as output. + * + * Return: + * If all GPIO signals of GPIO chip is configured as input then it returns + * error otherwise it returns 0. + */ +static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = gpiochip_get_data(gc); + int index = xgpio_index(chip, gpio); + int offset = xgpio_offset(chip, gpio); + + spin_lock_irqsave(&chip->gpio_lock[index], flags); + + /* Write state of GPIO signal */ + if (val) + chip->gpio_state[index] |= BIT(offset); + else + chip->gpio_state[index] &= ~BIT(offset); + xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + + xgpio_regoffset(chip, gpio), chip->gpio_state[index]); + + /* Clear the GPIO bit in shadow register and set direction as output */ + chip->gpio_dir[index] &= ~BIT(offset); + xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET + + xgpio_regoffset(chip, gpio), chip->gpio_dir[index]); + + spin_unlock_irqrestore(&chip->gpio_lock[index], flags); + + return 0; +} + +/** + * xgpio_save_regs - Set initial values of GPIO pins + * @mm_gc: Pointer to memory mapped GPIO chip structure + */ +static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state[0]); + xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir[0]); + + if (!chip->gpio_width[1]) + return; + + xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + XGPIO_CHANNEL_OFFSET, + chip->gpio_state[1]); + xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET + XGPIO_CHANNEL_OFFSET, + chip->gpio_dir[1]); +} + +/** + * xgpio_remove - Remove method for the GPIO device. + * @pdev: pointer to the platform device + * + * This function remove gpiochips and frees all the allocated resources. + * + * Return: 0 always + */ +static int xgpio_remove(struct platform_device *pdev) +{ + struct xgpio_instance *chip = platform_get_drvdata(pdev); + + of_mm_gpiochip_remove(&chip->mmchip); + + return 0; +} + +/** + * xgpio_of_probe - Probe method for the GPIO device. + * @pdev: pointer to the platform device + * + * Return: + * It returns 0, if the driver is bound to the GPIO device, or + * a negative value if there is an error. + */ +static int xgpio_probe(struct platform_device *pdev) +{ + struct xgpio_instance *chip; + int status = 0; + struct device_node *np = pdev->dev.of_node; + u32 is_dual; + + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + platform_set_drvdata(pdev, chip); + + /* Update GPIO state shadow register with default value */ + of_property_read_u32(np, "xlnx,dout-default", &chip->gpio_state[0]); + + /* Update GPIO direction shadow register with default value */ + if (of_property_read_u32(np, "xlnx,tri-default", &chip->gpio_dir[0])) + chip->gpio_dir[0] = 0xFFFFFFFF; + + /* + * Check device node and parent device node for device width + * and assume default width of 32 + */ + if (of_property_read_u32(np, "xlnx,gpio-width", &chip->gpio_width[0])) + chip->gpio_width[0] = 32; + + spin_lock_init(&chip->gpio_lock[0]); + + if (of_property_read_u32(np, "xlnx,is-dual", &is_dual)) + is_dual = 0; + + if (is_dual) { + /* Update GPIO state shadow register with default value */ + of_property_read_u32(np, "xlnx,dout-default-2", + &chip->gpio_state[1]); + + /* Update GPIO direction shadow register with default value */ + if (of_property_read_u32(np, "xlnx,tri-default-2", + &chip->gpio_dir[1])) + chip->gpio_dir[1] = 0xFFFFFFFF; + + /* + * Check device node and parent device node for device width + * and assume default width of 32 + */ + if (of_property_read_u32(np, "xlnx,gpio2-width", + &chip->gpio_width[1])) + chip->gpio_width[1] = 32; + + spin_lock_init(&chip->gpio_lock[1]); + } + + chip->mmchip.gc.ngpio = chip->gpio_width[0] + chip->gpio_width[1]; + chip->mmchip.gc.parent = &pdev->dev; + chip->mmchip.gc.direction_input = xgpio_dir_in; + chip->mmchip.gc.direction_output = xgpio_dir_out; + chip->mmchip.gc.get = xgpio_get; + chip->mmchip.gc.set = xgpio_set; + chip->mmchip.gc.set_multiple = xgpio_set_multiple; + + chip->mmchip.save_regs = xgpio_save_regs; + + /* Call the OF gpio helper to setup and register the GPIO device */ + status = of_mm_gpiochip_add_data(np, &chip->mmchip, chip); + if (status) { + pr_err("%pOF: error in probe function with status %d\n", + np, status); + return status; + } + + return 0; +} + +static const struct of_device_id xgpio_of_match[] = { + { .compatible = "xlnx,xps-gpio-1.00.a", }, + { /* end of list */ }, +}; + +MODULE_DEVICE_TABLE(of, xgpio_of_match); + +static struct platform_driver xgpio_plat_driver = { + .probe = xgpio_probe, + .remove = xgpio_remove, + .driver = { + .name = "gpio-xilinx", + .of_match_table = xgpio_of_match, + }, +}; + +static int __init xgpio_init(void) +{ + return platform_driver_register(&xgpio_plat_driver); +} + +subsys_initcall(xgpio_init); + +static void __exit xgpio_exit(void) +{ + platform_driver_unregister(&xgpio_plat_driver); +} +module_exit(xgpio_exit); + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("Xilinx GPIO driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-xlp.c b/drivers/gpio/gpio-xlp.c new file mode 100644 index 000000000..8e4275eaa --- /dev/null +++ b/drivers/gpio/gpio-xlp.c @@ -0,0 +1,456 @@ +/* + * Copyright (C) 2003-2015 Broadcom Corporation + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/of_device.h> +#include <linux/module.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/acpi.h> + +/* + * XLP GPIO has multiple 32 bit registers for each feature where each register + * controls 32 pins. So, pins up to 64 require 2 32-bit registers and up to 96 + * require 3 32-bit registers for each feature. + * Here we only define offset of the first register for each feature. Offset of + * the registers for pins greater than 32 can be calculated as following(Use + * GPIO_INT_STAT as example): + * + * offset = (gpio / XLP_GPIO_REGSZ) * 4; + * reg_addr = addr + offset; + * + * where addr is base address of the that feature register and gpio is the pin. + */ +#define GPIO_OUTPUT_EN 0x00 +#define GPIO_PADDRV 0x08 +#define GPIO_INT_EN00 0x18 +#define GPIO_INT_EN10 0x20 +#define GPIO_INT_EN20 0x28 +#define GPIO_INT_EN30 0x30 +#define GPIO_INT_POL 0x38 +#define GPIO_INT_TYPE 0x40 +#define GPIO_INT_STAT 0x48 + +#define GPIO_9XX_BYTESWAP 0X00 +#define GPIO_9XX_CTRL 0X04 +#define GPIO_9XX_OUTPUT_EN 0x14 +#define GPIO_9XX_PADDRV 0x24 +/* + * Only for 4 interrupt enable reg are defined for now, + * total reg available are 12. + */ +#define GPIO_9XX_INT_EN00 0x44 +#define GPIO_9XX_INT_EN10 0x54 +#define GPIO_9XX_INT_EN20 0x64 +#define GPIO_9XX_INT_EN30 0x74 +#define GPIO_9XX_INT_POL 0x104 +#define GPIO_9XX_INT_TYPE 0x114 +#define GPIO_9XX_INT_STAT 0x124 + +#define GPIO_3XX_INT_EN00 0x18 +#define GPIO_3XX_INT_EN10 0x20 +#define GPIO_3XX_INT_EN20 0x28 +#define GPIO_3XX_INT_EN30 0x30 +#define GPIO_3XX_INT_POL 0x78 +#define GPIO_3XX_INT_TYPE 0x80 +#define GPIO_3XX_INT_STAT 0x88 + +/* Interrupt type register mask */ +#define XLP_GPIO_IRQ_TYPE_LVL 0x0 +#define XLP_GPIO_IRQ_TYPE_EDGE 0x1 + +/* Interrupt polarity register mask */ +#define XLP_GPIO_IRQ_POL_HIGH 0x0 +#define XLP_GPIO_IRQ_POL_LOW 0x1 + +#define XLP_GPIO_REGSZ 32 +#define XLP_GPIO_IRQ_BASE 768 +#define XLP_MAX_NR_GPIO 96 + +/* XLP variants supported by this driver */ +enum { + XLP_GPIO_VARIANT_XLP832 = 1, + XLP_GPIO_VARIANT_XLP316, + XLP_GPIO_VARIANT_XLP208, + XLP_GPIO_VARIANT_XLP980, + XLP_GPIO_VARIANT_XLP532, + GPIO_VARIANT_VULCAN +}; + +struct xlp_gpio_priv { + struct gpio_chip chip; + DECLARE_BITMAP(gpio_enabled_mask, XLP_MAX_NR_GPIO); + void __iomem *gpio_intr_en; /* pointer to first intr enable reg */ + void __iomem *gpio_intr_stat; /* pointer to first intr status reg */ + void __iomem *gpio_intr_type; /* pointer to first intr type reg */ + void __iomem *gpio_intr_pol; /* pointer to first intr polarity reg */ + void __iomem *gpio_out_en; /* pointer to first output enable reg */ + void __iomem *gpio_paddrv; /* pointer to first pad drive reg */ + spinlock_t lock; +}; + +static int xlp_gpio_get_reg(void __iomem *addr, unsigned gpio) +{ + u32 pos, regset; + + pos = gpio % XLP_GPIO_REGSZ; + regset = (gpio / XLP_GPIO_REGSZ) * 4; + return !!(readl(addr + regset) & BIT(pos)); +} + +static void xlp_gpio_set_reg(void __iomem *addr, unsigned gpio, int state) +{ + u32 value, pos, regset; + + pos = gpio % XLP_GPIO_REGSZ; + regset = (gpio / XLP_GPIO_REGSZ) * 4; + value = readl(addr + regset); + + if (state) + value |= BIT(pos); + else + value &= ~BIT(pos); + + writel(value, addr + regset); +} + +static void xlp_gpio_irq_disable(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct xlp_gpio_priv *priv = gpiochip_get_data(gc); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0); + __clear_bit(d->hwirq, priv->gpio_enabled_mask); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void xlp_gpio_irq_mask_ack(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct xlp_gpio_priv *priv = gpiochip_get_data(gc); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0); + xlp_gpio_set_reg(priv->gpio_intr_stat, d->hwirq, 0x1); + __clear_bit(d->hwirq, priv->gpio_enabled_mask); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void xlp_gpio_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct xlp_gpio_priv *priv = gpiochip_get_data(gc); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x1); + __set_bit(d->hwirq, priv->gpio_enabled_mask); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int xlp_gpio_set_irq_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct xlp_gpio_priv *priv = gpiochip_get_data(gc); + int pol, irq_type; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + irq_type = XLP_GPIO_IRQ_TYPE_EDGE; + pol = XLP_GPIO_IRQ_POL_HIGH; + break; + case IRQ_TYPE_EDGE_FALLING: + irq_type = XLP_GPIO_IRQ_TYPE_EDGE; + pol = XLP_GPIO_IRQ_POL_LOW; + break; + case IRQ_TYPE_LEVEL_HIGH: + irq_type = XLP_GPIO_IRQ_TYPE_LVL; + pol = XLP_GPIO_IRQ_POL_HIGH; + break; + case IRQ_TYPE_LEVEL_LOW: + irq_type = XLP_GPIO_IRQ_TYPE_LVL; + pol = XLP_GPIO_IRQ_POL_LOW; + break; + default: + return -EINVAL; + } + + xlp_gpio_set_reg(priv->gpio_intr_type, d->hwirq, irq_type); + xlp_gpio_set_reg(priv->gpio_intr_pol, d->hwirq, pol); + + return 0; +} + +static struct irq_chip xlp_gpio_irq_chip = { + .name = "XLP-GPIO", + .irq_mask_ack = xlp_gpio_irq_mask_ack, + .irq_disable = xlp_gpio_irq_disable, + .irq_set_type = xlp_gpio_set_irq_type, + .irq_unmask = xlp_gpio_irq_unmask, + .flags = IRQCHIP_ONESHOT_SAFE, +}; + +static void xlp_gpio_generic_handler(struct irq_desc *desc) +{ + struct xlp_gpio_priv *priv = irq_desc_get_handler_data(desc); + struct irq_chip *irqchip = irq_desc_get_chip(desc); + int gpio, regoff; + u32 gpio_stat; + + regoff = -1; + gpio_stat = 0; + + chained_irq_enter(irqchip, desc); + for_each_set_bit(gpio, priv->gpio_enabled_mask, XLP_MAX_NR_GPIO) { + if (regoff != gpio / XLP_GPIO_REGSZ) { + regoff = gpio / XLP_GPIO_REGSZ; + gpio_stat = readl(priv->gpio_intr_stat + regoff * 4); + } + + if (gpio_stat & BIT(gpio % XLP_GPIO_REGSZ)) + generic_handle_irq(irq_find_mapping( + priv->chip.irq.domain, gpio)); + } + chained_irq_exit(irqchip, desc); +} + +static int xlp_gpio_dir_output(struct gpio_chip *gc, unsigned gpio, int state) +{ + struct xlp_gpio_priv *priv = gpiochip_get_data(gc); + + BUG_ON(gpio >= gc->ngpio); + xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x1); + + return 0; +} + +static int xlp_gpio_dir_input(struct gpio_chip *gc, unsigned gpio) +{ + struct xlp_gpio_priv *priv = gpiochip_get_data(gc); + + BUG_ON(gpio >= gc->ngpio); + xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x0); + + return 0; +} + +static int xlp_gpio_get(struct gpio_chip *gc, unsigned gpio) +{ + struct xlp_gpio_priv *priv = gpiochip_get_data(gc); + + BUG_ON(gpio >= gc->ngpio); + return xlp_gpio_get_reg(priv->gpio_paddrv, gpio); +} + +static void xlp_gpio_set(struct gpio_chip *gc, unsigned gpio, int state) +{ + struct xlp_gpio_priv *priv = gpiochip_get_data(gc); + + BUG_ON(gpio >= gc->ngpio); + xlp_gpio_set_reg(priv->gpio_paddrv, gpio, state); +} + +static const struct of_device_id xlp_gpio_of_ids[] = { + { + .compatible = "netlogic,xlp832-gpio", + .data = (void *)XLP_GPIO_VARIANT_XLP832, + }, + { + .compatible = "netlogic,xlp316-gpio", + .data = (void *)XLP_GPIO_VARIANT_XLP316, + }, + { + .compatible = "netlogic,xlp208-gpio", + .data = (void *)XLP_GPIO_VARIANT_XLP208, + }, + { + .compatible = "netlogic,xlp980-gpio", + .data = (void *)XLP_GPIO_VARIANT_XLP980, + }, + { + .compatible = "netlogic,xlp532-gpio", + .data = (void *)XLP_GPIO_VARIANT_XLP532, + }, + { + .compatible = "brcm,vulcan-gpio", + .data = (void *)GPIO_VARIANT_VULCAN, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, xlp_gpio_of_ids); + +static int xlp_gpio_probe(struct platform_device *pdev) +{ + struct gpio_chip *gc; + struct resource *iores; + struct xlp_gpio_priv *priv; + void __iomem *gpio_base; + int irq_base, irq, err; + int ngpio; + u32 soc_type; + + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iores) + return -ENODEV; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + gpio_base = devm_ioremap_resource(&pdev->dev, iores); + if (IS_ERR(gpio_base)) + return PTR_ERR(gpio_base); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + if (pdev->dev.of_node) { + soc_type = (uintptr_t)of_device_get_match_data(&pdev->dev); + } else { + const struct acpi_device_id *acpi_id; + + acpi_id = acpi_match_device(pdev->dev.driver->acpi_match_table, + &pdev->dev); + if (!acpi_id || !acpi_id->driver_data) { + dev_err(&pdev->dev, "Unable to match ACPI ID\n"); + return -ENODEV; + } + soc_type = (uintptr_t) acpi_id->driver_data; + } + + switch (soc_type) { + case XLP_GPIO_VARIANT_XLP832: + priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN; + priv->gpio_paddrv = gpio_base + GPIO_PADDRV; + priv->gpio_intr_stat = gpio_base + GPIO_INT_STAT; + priv->gpio_intr_type = gpio_base + GPIO_INT_TYPE; + priv->gpio_intr_pol = gpio_base + GPIO_INT_POL; + priv->gpio_intr_en = gpio_base + GPIO_INT_EN00; + ngpio = 41; + break; + case XLP_GPIO_VARIANT_XLP208: + case XLP_GPIO_VARIANT_XLP316: + priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN; + priv->gpio_paddrv = gpio_base + GPIO_PADDRV; + priv->gpio_intr_stat = gpio_base + GPIO_3XX_INT_STAT; + priv->gpio_intr_type = gpio_base + GPIO_3XX_INT_TYPE; + priv->gpio_intr_pol = gpio_base + GPIO_3XX_INT_POL; + priv->gpio_intr_en = gpio_base + GPIO_3XX_INT_EN00; + + ngpio = (soc_type == XLP_GPIO_VARIANT_XLP208) ? 42 : 57; + break; + case XLP_GPIO_VARIANT_XLP980: + case XLP_GPIO_VARIANT_XLP532: + case GPIO_VARIANT_VULCAN: + priv->gpio_out_en = gpio_base + GPIO_9XX_OUTPUT_EN; + priv->gpio_paddrv = gpio_base + GPIO_9XX_PADDRV; + priv->gpio_intr_stat = gpio_base + GPIO_9XX_INT_STAT; + priv->gpio_intr_type = gpio_base + GPIO_9XX_INT_TYPE; + priv->gpio_intr_pol = gpio_base + GPIO_9XX_INT_POL; + priv->gpio_intr_en = gpio_base + GPIO_9XX_INT_EN00; + + if (soc_type == XLP_GPIO_VARIANT_XLP980) + ngpio = 66; + else if (soc_type == XLP_GPIO_VARIANT_XLP532) + ngpio = 67; + else + ngpio = 70; + break; + default: + dev_err(&pdev->dev, "Unknown Processor type!\n"); + return -ENODEV; + } + + bitmap_zero(priv->gpio_enabled_mask, XLP_MAX_NR_GPIO); + + gc = &priv->chip; + + gc->owner = THIS_MODULE; + gc->label = dev_name(&pdev->dev); + gc->base = 0; + gc->parent = &pdev->dev; + gc->ngpio = ngpio; + gc->of_node = pdev->dev.of_node; + gc->direction_output = xlp_gpio_dir_output; + gc->direction_input = xlp_gpio_dir_input; + gc->set = xlp_gpio_set; + gc->get = xlp_gpio_get; + + spin_lock_init(&priv->lock); + + /* XLP(MIPS) has fixed range for GPIO IRQs, Vulcan(ARM64) does not */ + if (soc_type != GPIO_VARIANT_VULCAN) { + irq_base = devm_irq_alloc_descs(&pdev->dev, -1, + XLP_GPIO_IRQ_BASE, + gc->ngpio, 0); + if (irq_base < 0) { + dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n"); + return irq_base; + } + } else { + irq_base = 0; + } + + err = gpiochip_add_data(gc, priv); + if (err < 0) + return err; + + err = gpiochip_irqchip_add(gc, &xlp_gpio_irq_chip, irq_base, + handle_level_irq, IRQ_TYPE_NONE); + if (err) { + dev_err(&pdev->dev, "Could not connect irqchip to gpiochip!\n"); + goto out_gpio_remove; + } + + gpiochip_set_chained_irqchip(gc, &xlp_gpio_irq_chip, irq, + xlp_gpio_generic_handler); + + dev_info(&pdev->dev, "registered %d GPIOs\n", gc->ngpio); + + return 0; + +out_gpio_remove: + gpiochip_remove(gc); + return err; +} + +#ifdef CONFIG_ACPI +static const struct acpi_device_id xlp_gpio_acpi_match[] = { + { "BRCM9006", GPIO_VARIANT_VULCAN }, + { "CAV9006", GPIO_VARIANT_VULCAN }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, xlp_gpio_acpi_match); +#endif + +static struct platform_driver xlp_gpio_driver = { + .driver = { + .name = "xlp-gpio", + .of_match_table = xlp_gpio_of_ids, + .acpi_match_table = ACPI_PTR(xlp_gpio_acpi_match), + }, + .probe = xlp_gpio_probe, +}; +module_platform_driver(xlp_gpio_driver); + +MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>"); +MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@broadcom.com>"); +MODULE_DESCRIPTION("Netlogic XLP GPIO Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-xra1403.c b/drivers/gpio/gpio-xra1403.c new file mode 100644 index 000000000..8711a7907 --- /dev/null +++ b/drivers/gpio/gpio-xra1403.c @@ -0,0 +1,238 @@ +/* + * GPIO driver for EXAR XRA1403 16-bit GPIO expander + * + * Copyright (c) 2017, General Electric Company + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/bitops.h> +#include <linux/gpio/driver.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/seq_file.h> +#include <linux/spi/spi.h> +#include <linux/regmap.h> + +/* XRA1403 registers */ +#define XRA_GSR 0x00 /* GPIO State */ +#define XRA_OCR 0x02 /* Output Control */ +#define XRA_PIR 0x04 /* Input Polarity Inversion */ +#define XRA_GCR 0x06 /* GPIO Configuration */ +#define XRA_PUR 0x08 /* Input Internal Pull-up Resistor Enable/Disable */ +#define XRA_IER 0x0A /* Input Interrupt Enable */ +#define XRA_TSCR 0x0C /* Output Three-State Control */ +#define XRA_ISR 0x0E /* Input Interrupt Status */ +#define XRA_REIR 0x10 /* Input Rising Edge Interrupt Enable */ +#define XRA_FEIR 0x12 /* Input Falling Edge Interrupt Enable */ +#define XRA_IFR 0x14 /* Input Filter Enable/Disable */ +#define XRA_LAST 0x15 /* Bounds */ + +struct xra1403 { + struct gpio_chip chip; + struct regmap *regmap; +}; + +static const struct regmap_config xra1403_regmap_cfg = { + .reg_bits = 7, + .pad_bits = 1, + .val_bits = 8, + + .max_register = XRA_LAST, +}; + +static unsigned int to_reg(unsigned int reg, unsigned int offset) +{ + return reg + (offset > 7); +} + +static int xra1403_direction_input(struct gpio_chip *chip, unsigned int offset) +{ + struct xra1403 *xra = gpiochip_get_data(chip); + + return regmap_update_bits(xra->regmap, to_reg(XRA_GCR, offset), + BIT(offset % 8), BIT(offset % 8)); +} + +static int xra1403_direction_output(struct gpio_chip *chip, unsigned int offset, + int value) +{ + int ret; + struct xra1403 *xra = gpiochip_get_data(chip); + + ret = regmap_update_bits(xra->regmap, to_reg(XRA_GCR, offset), + BIT(offset % 8), 0); + if (ret) + return ret; + + ret = regmap_update_bits(xra->regmap, to_reg(XRA_OCR, offset), + BIT(offset % 8), value ? BIT(offset % 8) : 0); + + return ret; +} + +static int xra1403_get_direction(struct gpio_chip *chip, unsigned int offset) +{ + int ret; + unsigned int val; + struct xra1403 *xra = gpiochip_get_data(chip); + + ret = regmap_read(xra->regmap, to_reg(XRA_GCR, offset), &val); + if (ret) + return ret; + + return !!(val & BIT(offset % 8)); +} + +static int xra1403_get(struct gpio_chip *chip, unsigned int offset) +{ + int ret; + unsigned int val; + struct xra1403 *xra = gpiochip_get_data(chip); + + ret = regmap_read(xra->regmap, to_reg(XRA_GSR, offset), &val); + if (ret) + return ret; + + return !!(val & BIT(offset % 8)); +} + +static void xra1403_set(struct gpio_chip *chip, unsigned int offset, int value) +{ + int ret; + struct xra1403 *xra = gpiochip_get_data(chip); + + ret = regmap_update_bits(xra->regmap, to_reg(XRA_OCR, offset), + BIT(offset % 8), value ? BIT(offset % 8) : 0); + if (ret) + dev_err(chip->parent, "Failed to set pin: %d, ret: %d\n", + offset, ret); +} + +#ifdef CONFIG_DEBUG_FS +static void xra1403_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + int reg; + struct xra1403 *xra = gpiochip_get_data(chip); + int value[XRA_LAST]; + int i; + unsigned int gcr; + unsigned int gsr; + + seq_puts(s, "xra reg:"); + for (reg = 0; reg <= XRA_LAST; reg++) + seq_printf(s, " %2.2x", reg); + seq_puts(s, "\n value:"); + for (reg = 0; reg < XRA_LAST; reg++) { + regmap_read(xra->regmap, reg, &value[reg]); + seq_printf(s, " %2.2x", value[reg]); + } + seq_puts(s, "\n"); + + gcr = value[XRA_GCR + 1] << 8 | value[XRA_GCR]; + gsr = value[XRA_GSR + 1] << 8 | value[XRA_GSR]; + for (i = 0; i < chip->ngpio; i++) { + const char *label = gpiochip_is_requested(chip, i); + + if (!label) + continue; + + seq_printf(s, " gpio-%-3d (%-12s) %s %s\n", + chip->base + i, label, + (gcr & BIT(i)) ? "in" : "out", + (gsr & BIT(i)) ? "hi" : "lo"); + } +} +#else +#define xra1403_dbg_show NULL +#endif + +static int xra1403_probe(struct spi_device *spi) +{ + struct xra1403 *xra; + struct gpio_desc *reset_gpio; + int ret; + + xra = devm_kzalloc(&spi->dev, sizeof(*xra), GFP_KERNEL); + if (!xra) + return -ENOMEM; + + /* bring the chip out of reset if reset pin is provided*/ + reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(reset_gpio)) + dev_warn(&spi->dev, "Could not get reset-gpios\n"); + + xra->chip.direction_input = xra1403_direction_input; + xra->chip.direction_output = xra1403_direction_output; + xra->chip.get_direction = xra1403_get_direction; + xra->chip.get = xra1403_get; + xra->chip.set = xra1403_set; + + xra->chip.dbg_show = xra1403_dbg_show; + + xra->chip.ngpio = 16; + xra->chip.label = "xra1403"; + + xra->chip.base = -1; + xra->chip.can_sleep = true; + xra->chip.parent = &spi->dev; + xra->chip.owner = THIS_MODULE; + + xra->regmap = devm_regmap_init_spi(spi, &xra1403_regmap_cfg); + if (IS_ERR(xra->regmap)) { + ret = PTR_ERR(xra->regmap); + dev_err(&spi->dev, "Failed to allocate regmap: %d\n", ret); + return ret; + } + + ret = devm_gpiochip_add_data(&spi->dev, &xra->chip, xra); + if (ret < 0) { + dev_err(&spi->dev, "Unable to register gpiochip\n"); + return ret; + } + + spi_set_drvdata(spi, xra); + + return 0; +} + +static const struct spi_device_id xra1403_ids[] = { + { "xra1403" }, + {}, +}; +MODULE_DEVICE_TABLE(spi, xra1403_ids); + +static const struct of_device_id xra1403_spi_of_match[] = { + { .compatible = "exar,xra1403" }, + {}, +}; +MODULE_DEVICE_TABLE(of, xra1403_spi_of_match); + +static struct spi_driver xra1403_driver = { + .probe = xra1403_probe, + .id_table = xra1403_ids, + .driver = { + .name = "xra1403", + .of_match_table = of_match_ptr(xra1403_spi_of_match), + }, +}; + +module_spi_driver(xra1403_driver); + +MODULE_AUTHOR("Nandor Han <nandor.han@ge.com>"); +MODULE_AUTHOR("Semi Malinen <semi.malinen@ge.com>"); +MODULE_DESCRIPTION("GPIO expander driver for EXAR XRA1403"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-xtensa.c b/drivers/gpio/gpio-xtensa.c new file mode 100644 index 000000000..f16c04279 --- /dev/null +++ b/drivers/gpio/gpio-xtensa.c @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2013 TangoTec Ltd. + * Author: Baruch Siach <baruch@tkos.co.il> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Driver for the Xtensa LX4 GPIO32 Option + * + * Documentation: Xtensa LX4 Microprocessor Data Book, Section 2.22 + * + * GPIO32 is a standard optional extension to the Xtensa architecture core that + * provides preconfigured output and input ports for intra SoC signaling. The + * GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE) + * output state called EXPSTATE, and 32bit input wire called IMPWIRE. This + * driver treats input and output states as two distinct devices. + * + * Access to GPIO32 specific instructions is controlled by the CPENABLE + * (Coprocessor Enable Bits) register. By default Xtensa Linux startup code + * disables access to all coprocessors. This driver sets the CPENABLE bit + * corresponding to GPIO32 before any GPIO32 specific instruction, and restores + * CPENABLE state after that. + * + * This driver is currently incompatible with SMP. The GPIO32 extension is not + * guaranteed to be available in all cores. Moreover, each core controls a + * different set of IO wires. A theoretical SMP aware version of this driver + * would need to have a per core workqueue to do the actual GPIO manipulation. + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/bitops.h> +#include <linux/platform_device.h> + +#include <asm/coprocessor.h> /* CPENABLE read/write macros */ + +#ifndef XCHAL_CP_ID_XTIOP +#error GPIO32 option is not enabled for your xtensa core variant +#endif + +#if XCHAL_HAVE_CP + +static inline unsigned long enable_cp(unsigned long *cpenable) +{ + unsigned long flags; + + local_irq_save(flags); + RSR_CPENABLE(*cpenable); + WSR_CPENABLE(*cpenable | BIT(XCHAL_CP_ID_XTIOP)); + + return flags; +} + +static inline void disable_cp(unsigned long flags, unsigned long cpenable) +{ + WSR_CPENABLE(cpenable); + local_irq_restore(flags); +} + +#else + +static inline unsigned long enable_cp(unsigned long *cpenable) +{ + *cpenable = 0; /* avoid uninitialized value warning */ + return 0; +} + +static inline void disable_cp(unsigned long flags, unsigned long cpenable) +{ +} + +#endif /* XCHAL_HAVE_CP */ + +static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset) +{ + return 1; /* input only */ +} + +static int xtensa_impwire_get_value(struct gpio_chip *gc, unsigned offset) +{ + unsigned long flags, saved_cpenable; + u32 impwire; + + flags = enable_cp(&saved_cpenable); + __asm__ __volatile__("read_impwire %0" : "=a" (impwire)); + disable_cp(flags, saved_cpenable); + + return !!(impwire & BIT(offset)); +} + +static void xtensa_impwire_set_value(struct gpio_chip *gc, unsigned offset, + int value) +{ + BUG(); /* output only; should never be called */ +} + +static int xtensa_expstate_get_direction(struct gpio_chip *gc, unsigned offset) +{ + return 0; /* output only */ +} + +static int xtensa_expstate_get_value(struct gpio_chip *gc, unsigned offset) +{ + unsigned long flags, saved_cpenable; + u32 expstate; + + flags = enable_cp(&saved_cpenable); + __asm__ __volatile__("rur.expstate %0" : "=a" (expstate)); + disable_cp(flags, saved_cpenable); + + return !!(expstate & BIT(offset)); +} + +static void xtensa_expstate_set_value(struct gpio_chip *gc, unsigned offset, + int value) +{ + unsigned long flags, saved_cpenable; + u32 mask = BIT(offset); + u32 val = value ? BIT(offset) : 0; + + flags = enable_cp(&saved_cpenable); + __asm__ __volatile__("wrmsk_expstate %0, %1" + :: "a" (val), "a" (mask)); + disable_cp(flags, saved_cpenable); +} + +static struct gpio_chip impwire_chip = { + .label = "impwire", + .base = -1, + .ngpio = 32, + .get_direction = xtensa_impwire_get_direction, + .get = xtensa_impwire_get_value, + .set = xtensa_impwire_set_value, +}; + +static struct gpio_chip expstate_chip = { + .label = "expstate", + .base = -1, + .ngpio = 32, + .get_direction = xtensa_expstate_get_direction, + .get = xtensa_expstate_get_value, + .set = xtensa_expstate_set_value, +}; + +static int xtensa_gpio_probe(struct platform_device *pdev) +{ + int ret; + + ret = gpiochip_add_data(&impwire_chip, NULL); + if (ret) + return ret; + return gpiochip_add_data(&expstate_chip, NULL); +} + +static struct platform_driver xtensa_gpio_driver = { + .driver = { + .name = "xtensa-gpio", + }, + .probe = xtensa_gpio_probe, +}; + +static int __init xtensa_gpio_init(void) +{ + struct platform_device *pdev; + + pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + return platform_driver_register(&xtensa_gpio_driver); +} +device_initcall(xtensa_gpio_init); + +MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); +MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-zevio.c b/drivers/gpio/gpio-zevio.c new file mode 100644 index 000000000..3926ce9c2 --- /dev/null +++ b/drivers/gpio/gpio-zevio.c @@ -0,0 +1,219 @@ +/* + * GPIO controller in LSI ZEVIO SoCs. + * + * Author: Fabian Vogt <fabian@ritter-vogt.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/io.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/slab.h> +#include <linux/gpio.h> + +/* + * Memory layout: + * This chip has four gpio sections, each controls 8 GPIOs. + * Bit 0 in section 0 is GPIO 0, bit 2 in section 1 is GPIO 10. + * Disclaimer: Reverse engineered! + * For more information refer to: + * http://hackspire.unsads.com/wiki/index.php/Memory-mapped_I/O_ports#90000000_-_General_Purpose_I.2FO_.28GPIO.29 + * + * 0x00-0x3F: Section 0 + * +0x00: Masked interrupt status (read-only) + * +0x04: R: Interrupt status W: Reset interrupt status + * +0x08: R: Interrupt mask W: Mask interrupt + * +0x0C: W: Unmask interrupt (write-only) + * +0x10: Direction: I/O=1/0 + * +0x14: Output + * +0x18: Input (read-only) + * +0x20: R: Level interrupt W: Set as level interrupt + * 0x40-0x7F: Section 1 + * 0x80-0xBF: Section 2 + * 0xC0-0xFF: Section 3 + */ + +#define ZEVIO_GPIO_SECTION_SIZE 0x40 + +/* Offsets to various registers */ +#define ZEVIO_GPIO_INT_MASKED_STATUS 0x00 +#define ZEVIO_GPIO_INT_STATUS 0x04 +#define ZEVIO_GPIO_INT_UNMASK 0x08 +#define ZEVIO_GPIO_INT_MASK 0x0C +#define ZEVIO_GPIO_DIRECTION 0x10 +#define ZEVIO_GPIO_OUTPUT 0x14 +#define ZEVIO_GPIO_INPUT 0x18 +#define ZEVIO_GPIO_INT_STICKY 0x20 + +/* Bit number of GPIO in its section */ +#define ZEVIO_GPIO_BIT(gpio) (gpio&7) + +struct zevio_gpio { + spinlock_t lock; + struct of_mm_gpio_chip chip; +}; + +static inline u32 zevio_gpio_port_get(struct zevio_gpio *c, unsigned pin, + unsigned port_offset) +{ + unsigned section_offset = ((pin >> 3) & 3)*ZEVIO_GPIO_SECTION_SIZE; + return readl(IOMEM(c->chip.regs + section_offset + port_offset)); +} + +static inline void zevio_gpio_port_set(struct zevio_gpio *c, unsigned pin, + unsigned port_offset, u32 val) +{ + unsigned section_offset = ((pin >> 3) & 3)*ZEVIO_GPIO_SECTION_SIZE; + writel(val, IOMEM(c->chip.regs + section_offset + port_offset)); +} + +/* Functions for struct gpio_chip */ +static int zevio_gpio_get(struct gpio_chip *chip, unsigned pin) +{ + struct zevio_gpio *controller = gpiochip_get_data(chip); + u32 val, dir; + + spin_lock(&controller->lock); + dir = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION); + if (dir & BIT(ZEVIO_GPIO_BIT(pin))) + val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_INPUT); + else + val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT); + spin_unlock(&controller->lock); + + return (val >> ZEVIO_GPIO_BIT(pin)) & 0x1; +} + +static void zevio_gpio_set(struct gpio_chip *chip, unsigned pin, int value) +{ + struct zevio_gpio *controller = gpiochip_get_data(chip); + u32 val; + + spin_lock(&controller->lock); + val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT); + if (value) + val |= BIT(ZEVIO_GPIO_BIT(pin)); + else + val &= ~BIT(ZEVIO_GPIO_BIT(pin)); + + zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_OUTPUT, val); + spin_unlock(&controller->lock); +} + +static int zevio_gpio_direction_input(struct gpio_chip *chip, unsigned pin) +{ + struct zevio_gpio *controller = gpiochip_get_data(chip); + u32 val; + + spin_lock(&controller->lock); + + val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION); + val |= BIT(ZEVIO_GPIO_BIT(pin)); + zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_DIRECTION, val); + + spin_unlock(&controller->lock); + + return 0; +} + +static int zevio_gpio_direction_output(struct gpio_chip *chip, + unsigned pin, int value) +{ + struct zevio_gpio *controller = gpiochip_get_data(chip); + u32 val; + + spin_lock(&controller->lock); + val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT); + if (value) + val |= BIT(ZEVIO_GPIO_BIT(pin)); + else + val &= ~BIT(ZEVIO_GPIO_BIT(pin)); + + zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_OUTPUT, val); + val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION); + val &= ~BIT(ZEVIO_GPIO_BIT(pin)); + zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_DIRECTION, val); + + spin_unlock(&controller->lock); + + return 0; +} + +static int zevio_gpio_to_irq(struct gpio_chip *chip, unsigned pin) +{ + /* + * TODO: Implement IRQs. + * Not implemented yet due to weird lockups + */ + + return -ENXIO; +} + +static const struct gpio_chip zevio_gpio_chip = { + .direction_input = zevio_gpio_direction_input, + .direction_output = zevio_gpio_direction_output, + .set = zevio_gpio_set, + .get = zevio_gpio_get, + .to_irq = zevio_gpio_to_irq, + .base = 0, + .owner = THIS_MODULE, + .ngpio = 32, + .of_gpio_n_cells = 2, +}; + +/* Initialization */ +static int zevio_gpio_probe(struct platform_device *pdev) +{ + struct zevio_gpio *controller; + int status, i; + + controller = devm_kzalloc(&pdev->dev, sizeof(*controller), GFP_KERNEL); + if (!controller) + return -ENOMEM; + + platform_set_drvdata(pdev, controller); + + /* Copy our reference */ + controller->chip.gc = zevio_gpio_chip; + controller->chip.gc.parent = &pdev->dev; + + status = of_mm_gpiochip_add_data(pdev->dev.of_node, + &(controller->chip), + controller); + if (status) { + dev_err(&pdev->dev, "failed to add gpiochip: %d\n", status); + return status; + } + + spin_lock_init(&controller->lock); + + /* Disable interrupts, they only cause errors */ + for (i = 0; i < controller->chip.gc.ngpio; i += 8) + zevio_gpio_port_set(controller, i, ZEVIO_GPIO_INT_MASK, 0xFF); + + dev_dbg(controller->chip.gc.parent, "ZEVIO GPIO controller set up!\n"); + + return 0; +} + +static const struct of_device_id zevio_gpio_of_match[] = { + { .compatible = "lsi,zevio-gpio", }, + { }, +}; + +static struct platform_driver zevio_gpio_driver = { + .driver = { + .name = "gpio-zevio", + .of_match_table = zevio_gpio_of_match, + .suppress_bind_attrs = true, + }, + .probe = zevio_gpio_probe, +}; +builtin_platform_driver(zevio_gpio_driver); diff --git a/drivers/gpio/gpio-zx.c b/drivers/gpio/gpio-zx.c new file mode 100644 index 000000000..5eacad9b2 --- /dev/null +++ b/drivers/gpio/gpio-zx.c @@ -0,0 +1,297 @@ +/* + * ZTE ZX296702 GPIO driver + * + * Author: Jun Nie <jun.nie@linaro.org> + * + * Copyright (C) 2015 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/gpio/driver.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#define ZX_GPIO_DIR 0x00 +#define ZX_GPIO_IVE 0x04 +#define ZX_GPIO_IV 0x08 +#define ZX_GPIO_IEP 0x0C +#define ZX_GPIO_IEN 0x10 +#define ZX_GPIO_DI 0x14 +#define ZX_GPIO_DO1 0x18 +#define ZX_GPIO_DO0 0x1C +#define ZX_GPIO_DO 0x20 + +#define ZX_GPIO_IM 0x28 +#define ZX_GPIO_IE 0x2C + +#define ZX_GPIO_MIS 0x30 +#define ZX_GPIO_IC 0x34 + +#define ZX_GPIO_NR 16 + +struct zx_gpio { + raw_spinlock_t lock; + + void __iomem *base; + struct gpio_chip gc; +}; + +static int zx_direction_input(struct gpio_chip *gc, unsigned offset) +{ + struct zx_gpio *chip = gpiochip_get_data(gc); + unsigned long flags; + u16 gpiodir; + + if (offset >= gc->ngpio) + return -EINVAL; + + raw_spin_lock_irqsave(&chip->lock, flags); + gpiodir = readw_relaxed(chip->base + ZX_GPIO_DIR); + gpiodir &= ~BIT(offset); + writew_relaxed(gpiodir, chip->base + ZX_GPIO_DIR); + raw_spin_unlock_irqrestore(&chip->lock, flags); + + return 0; +} + +static int zx_direction_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct zx_gpio *chip = gpiochip_get_data(gc); + unsigned long flags; + u16 gpiodir; + + if (offset >= gc->ngpio) + return -EINVAL; + + raw_spin_lock_irqsave(&chip->lock, flags); + gpiodir = readw_relaxed(chip->base + ZX_GPIO_DIR); + gpiodir |= BIT(offset); + writew_relaxed(gpiodir, chip->base + ZX_GPIO_DIR); + + if (value) + writew_relaxed(BIT(offset), chip->base + ZX_GPIO_DO1); + else + writew_relaxed(BIT(offset), chip->base + ZX_GPIO_DO0); + raw_spin_unlock_irqrestore(&chip->lock, flags); + + return 0; +} + +static int zx_get_value(struct gpio_chip *gc, unsigned offset) +{ + struct zx_gpio *chip = gpiochip_get_data(gc); + + return !!(readw_relaxed(chip->base + ZX_GPIO_DI) & BIT(offset)); +} + +static void zx_set_value(struct gpio_chip *gc, unsigned offset, int value) +{ + struct zx_gpio *chip = gpiochip_get_data(gc); + + if (value) + writew_relaxed(BIT(offset), chip->base + ZX_GPIO_DO1); + else + writew_relaxed(BIT(offset), chip->base + ZX_GPIO_DO0); +} + +static int zx_irq_type(struct irq_data *d, unsigned trigger) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct zx_gpio *chip = gpiochip_get_data(gc); + int offset = irqd_to_hwirq(d); + unsigned long flags; + u16 gpiois, gpioi_epos, gpioi_eneg, gpioiev; + u16 bit = BIT(offset); + + if (offset < 0 || offset >= ZX_GPIO_NR) + return -EINVAL; + + raw_spin_lock_irqsave(&chip->lock, flags); + + gpioiev = readw_relaxed(chip->base + ZX_GPIO_IV); + gpiois = readw_relaxed(chip->base + ZX_GPIO_IVE); + gpioi_epos = readw_relaxed(chip->base + ZX_GPIO_IEP); + gpioi_eneg = readw_relaxed(chip->base + ZX_GPIO_IEN); + + if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { + gpiois |= bit; + if (trigger & IRQ_TYPE_LEVEL_HIGH) + gpioiev |= bit; + else + gpioiev &= ~bit; + } else + gpiois &= ~bit; + + if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { + gpioi_epos |= bit; + gpioi_eneg |= bit; + } else { + if (trigger & IRQ_TYPE_EDGE_RISING) { + gpioi_epos |= bit; + gpioi_eneg &= ~bit; + } else if (trigger & IRQ_TYPE_EDGE_FALLING) { + gpioi_eneg |= bit; + gpioi_epos &= ~bit; + } + } + + writew_relaxed(gpiois, chip->base + ZX_GPIO_IVE); + writew_relaxed(gpioi_epos, chip->base + ZX_GPIO_IEP); + writew_relaxed(gpioi_eneg, chip->base + ZX_GPIO_IEN); + writew_relaxed(gpioiev, chip->base + ZX_GPIO_IV); + raw_spin_unlock_irqrestore(&chip->lock, flags); + + return 0; +} + +static void zx_irq_handler(struct irq_desc *desc) +{ + unsigned long pending; + int offset; + struct gpio_chip *gc = irq_desc_get_handler_data(desc); + struct zx_gpio *chip = gpiochip_get_data(gc); + struct irq_chip *irqchip = irq_desc_get_chip(desc); + + chained_irq_enter(irqchip, desc); + + pending = readw_relaxed(chip->base + ZX_GPIO_MIS); + writew_relaxed(pending, chip->base + ZX_GPIO_IC); + if (pending) { + for_each_set_bit(offset, &pending, ZX_GPIO_NR) + generic_handle_irq(irq_find_mapping(gc->irq.domain, + offset)); + } + + chained_irq_exit(irqchip, desc); +} + +static void zx_irq_mask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct zx_gpio *chip = gpiochip_get_data(gc); + u16 mask = BIT(irqd_to_hwirq(d) % ZX_GPIO_NR); + u16 gpioie; + + raw_spin_lock(&chip->lock); + gpioie = readw_relaxed(chip->base + ZX_GPIO_IM) | mask; + writew_relaxed(gpioie, chip->base + ZX_GPIO_IM); + gpioie = readw_relaxed(chip->base + ZX_GPIO_IE) & ~mask; + writew_relaxed(gpioie, chip->base + ZX_GPIO_IE); + raw_spin_unlock(&chip->lock); +} + +static void zx_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct zx_gpio *chip = gpiochip_get_data(gc); + u16 mask = BIT(irqd_to_hwirq(d) % ZX_GPIO_NR); + u16 gpioie; + + raw_spin_lock(&chip->lock); + gpioie = readw_relaxed(chip->base + ZX_GPIO_IM) & ~mask; + writew_relaxed(gpioie, chip->base + ZX_GPIO_IM); + gpioie = readw_relaxed(chip->base + ZX_GPIO_IE) | mask; + writew_relaxed(gpioie, chip->base + ZX_GPIO_IE); + raw_spin_unlock(&chip->lock); +} + +static struct irq_chip zx_irqchip = { + .name = "zx-gpio", + .irq_mask = zx_irq_mask, + .irq_unmask = zx_irq_unmask, + .irq_set_type = zx_irq_type, +}; + +static int zx_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct zx_gpio *chip; + struct resource *res; + int irq, id, ret; + + chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + chip->base = devm_ioremap_resource(dev, res); + if (IS_ERR(chip->base)) + return PTR_ERR(chip->base); + + raw_spin_lock_init(&chip->lock); + if (of_property_read_bool(dev->of_node, "gpio-ranges")) { + chip->gc.request = gpiochip_generic_request; + chip->gc.free = gpiochip_generic_free; + } + + id = of_alias_get_id(dev->of_node, "gpio"); + chip->gc.direction_input = zx_direction_input; + chip->gc.direction_output = zx_direction_output; + chip->gc.get = zx_get_value; + chip->gc.set = zx_set_value; + chip->gc.base = ZX_GPIO_NR * id; + chip->gc.ngpio = ZX_GPIO_NR; + chip->gc.label = dev_name(dev); + chip->gc.parent = dev; + chip->gc.owner = THIS_MODULE; + + ret = gpiochip_add_data(&chip->gc, chip); + if (ret) + return ret; + + /* + * irq_chip support + */ + writew_relaxed(0xffff, chip->base + ZX_GPIO_IM); + writew_relaxed(0, chip->base + ZX_GPIO_IE); + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "invalid IRQ\n"); + gpiochip_remove(&chip->gc); + return -ENODEV; + } + + ret = gpiochip_irqchip_add(&chip->gc, &zx_irqchip, + 0, handle_simple_irq, + IRQ_TYPE_NONE); + if (ret) { + dev_err(dev, "could not add irqchip\n"); + gpiochip_remove(&chip->gc); + return ret; + } + gpiochip_set_chained_irqchip(&chip->gc, &zx_irqchip, + irq, zx_irq_handler); + + platform_set_drvdata(pdev, chip); + dev_info(dev, "ZX GPIO chip registered\n"); + + return 0; +} + +static const struct of_device_id zx_gpio_match[] = { + { + .compatible = "zte,zx296702-gpio", + }, + { }, +}; + +static struct platform_driver zx_gpio_driver = { + .probe = zx_gpio_probe, + .driver = { + .name = "zx_gpio", + .of_match_table = of_match_ptr(zx_gpio_match), + }, +}; +builtin_platform_driver(zx_gpio_driver) diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c new file mode 100644 index 000000000..c2279b28b --- /dev/null +++ b/drivers/gpio/gpio-zynq.c @@ -0,0 +1,963 @@ +/* + * Xilinx Zynq GPIO device driver + * + * Copyright (C) 2009 - 2014 Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any later + * version. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/gpio/driver.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/of.h> + +#define DRIVER_NAME "zynq-gpio" + +/* Maximum banks */ +#define ZYNQ_GPIO_MAX_BANK 4 +#define ZYNQMP_GPIO_MAX_BANK 6 + +#define ZYNQ_GPIO_BANK0_NGPIO 32 +#define ZYNQ_GPIO_BANK1_NGPIO 22 +#define ZYNQ_GPIO_BANK2_NGPIO 32 +#define ZYNQ_GPIO_BANK3_NGPIO 32 + +#define ZYNQMP_GPIO_BANK0_NGPIO 26 +#define ZYNQMP_GPIO_BANK1_NGPIO 26 +#define ZYNQMP_GPIO_BANK2_NGPIO 26 +#define ZYNQMP_GPIO_BANK3_NGPIO 32 +#define ZYNQMP_GPIO_BANK4_NGPIO 32 +#define ZYNQMP_GPIO_BANK5_NGPIO 32 + +#define ZYNQ_GPIO_NR_GPIOS 118 +#define ZYNQMP_GPIO_NR_GPIOS 174 + +#define ZYNQ_GPIO_BANK0_PIN_MIN(str) 0 +#define ZYNQ_GPIO_BANK0_PIN_MAX(str) (ZYNQ_GPIO_BANK0_PIN_MIN(str) + \ + ZYNQ##str##_GPIO_BANK0_NGPIO - 1) +#define ZYNQ_GPIO_BANK1_PIN_MIN(str) (ZYNQ_GPIO_BANK0_PIN_MAX(str) + 1) +#define ZYNQ_GPIO_BANK1_PIN_MAX(str) (ZYNQ_GPIO_BANK1_PIN_MIN(str) + \ + ZYNQ##str##_GPIO_BANK1_NGPIO - 1) +#define ZYNQ_GPIO_BANK2_PIN_MIN(str) (ZYNQ_GPIO_BANK1_PIN_MAX(str) + 1) +#define ZYNQ_GPIO_BANK2_PIN_MAX(str) (ZYNQ_GPIO_BANK2_PIN_MIN(str) + \ + ZYNQ##str##_GPIO_BANK2_NGPIO - 1) +#define ZYNQ_GPIO_BANK3_PIN_MIN(str) (ZYNQ_GPIO_BANK2_PIN_MAX(str) + 1) +#define ZYNQ_GPIO_BANK3_PIN_MAX(str) (ZYNQ_GPIO_BANK3_PIN_MIN(str) + \ + ZYNQ##str##_GPIO_BANK3_NGPIO - 1) +#define ZYNQ_GPIO_BANK4_PIN_MIN(str) (ZYNQ_GPIO_BANK3_PIN_MAX(str) + 1) +#define ZYNQ_GPIO_BANK4_PIN_MAX(str) (ZYNQ_GPIO_BANK4_PIN_MIN(str) + \ + ZYNQ##str##_GPIO_BANK4_NGPIO - 1) +#define ZYNQ_GPIO_BANK5_PIN_MIN(str) (ZYNQ_GPIO_BANK4_PIN_MAX(str) + 1) +#define ZYNQ_GPIO_BANK5_PIN_MAX(str) (ZYNQ_GPIO_BANK5_PIN_MIN(str) + \ + ZYNQ##str##_GPIO_BANK5_NGPIO - 1) + +/* Register offsets for the GPIO device */ +/* LSW Mask & Data -WO */ +#define ZYNQ_GPIO_DATA_LSW_OFFSET(BANK) (0x000 + (8 * BANK)) +/* MSW Mask & Data -WO */ +#define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK) (0x004 + (8 * BANK)) +/* Data Register-RW */ +#define ZYNQ_GPIO_DATA_OFFSET(BANK) (0x040 + (4 * BANK)) +#define ZYNQ_GPIO_DATA_RO_OFFSET(BANK) (0x060 + (4 * BANK)) +/* Direction mode reg-RW */ +#define ZYNQ_GPIO_DIRM_OFFSET(BANK) (0x204 + (0x40 * BANK)) +/* Output enable reg-RW */ +#define ZYNQ_GPIO_OUTEN_OFFSET(BANK) (0x208 + (0x40 * BANK)) +/* Interrupt mask reg-RO */ +#define ZYNQ_GPIO_INTMASK_OFFSET(BANK) (0x20C + (0x40 * BANK)) +/* Interrupt enable reg-WO */ +#define ZYNQ_GPIO_INTEN_OFFSET(BANK) (0x210 + (0x40 * BANK)) +/* Interrupt disable reg-WO */ +#define ZYNQ_GPIO_INTDIS_OFFSET(BANK) (0x214 + (0x40 * BANK)) +/* Interrupt status reg-RO */ +#define ZYNQ_GPIO_INTSTS_OFFSET(BANK) (0x218 + (0x40 * BANK)) +/* Interrupt type reg-RW */ +#define ZYNQ_GPIO_INTTYPE_OFFSET(BANK) (0x21C + (0x40 * BANK)) +/* Interrupt polarity reg-RW */ +#define ZYNQ_GPIO_INTPOL_OFFSET(BANK) (0x220 + (0x40 * BANK)) +/* Interrupt on any, reg-RW */ +#define ZYNQ_GPIO_INTANY_OFFSET(BANK) (0x224 + (0x40 * BANK)) + +/* Disable all interrupts mask */ +#define ZYNQ_GPIO_IXR_DISABLE_ALL 0xFFFFFFFF + +/* Mid pin number of a bank */ +#define ZYNQ_GPIO_MID_PIN_NUM 16 + +/* GPIO upper 16 bit mask */ +#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000 + +/* set to differentiate zynq from zynqmp, 0=zynqmp, 1=zynq */ +#define ZYNQ_GPIO_QUIRK_IS_ZYNQ BIT(0) +#define GPIO_QUIRK_DATA_RO_BUG BIT(1) + +struct gpio_regs { + u32 datamsw[ZYNQMP_GPIO_MAX_BANK]; + u32 datalsw[ZYNQMP_GPIO_MAX_BANK]; + u32 dirm[ZYNQMP_GPIO_MAX_BANK]; + u32 outen[ZYNQMP_GPIO_MAX_BANK]; + u32 int_en[ZYNQMP_GPIO_MAX_BANK]; + u32 int_dis[ZYNQMP_GPIO_MAX_BANK]; + u32 int_type[ZYNQMP_GPIO_MAX_BANK]; + u32 int_polarity[ZYNQMP_GPIO_MAX_BANK]; + u32 int_any[ZYNQMP_GPIO_MAX_BANK]; +}; + +/** + * struct zynq_gpio - gpio device private data structure + * @chip: instance of the gpio_chip + * @base_addr: base address of the GPIO device + * @clk: clock resource for this controller + * @irq: interrupt for the GPIO device + * @p_data: pointer to platform data + * @context: context registers + */ +struct zynq_gpio { + struct gpio_chip chip; + void __iomem *base_addr; + struct clk *clk; + int irq; + const struct zynq_platform_data *p_data; + struct gpio_regs context; +}; + +/** + * struct zynq_platform_data - zynq gpio platform data structure + * @label: string to store in gpio->label + * @quirks: Flags is used to identify the platform + * @ngpio: max number of gpio pins + * @max_bank: maximum number of gpio banks + * @bank_min: this array represents bank's min pin + * @bank_max: this array represents bank's max pin + */ +struct zynq_platform_data { + const char *label; + u32 quirks; + u16 ngpio; + int max_bank; + int bank_min[ZYNQMP_GPIO_MAX_BANK]; + int bank_max[ZYNQMP_GPIO_MAX_BANK]; +}; + +static struct irq_chip zynq_gpio_level_irqchip; +static struct irq_chip zynq_gpio_edge_irqchip; + +/** + * zynq_gpio_is_zynq - test if HW is zynq or zynqmp + * @gpio: Pointer to driver data struct + * + * Return: 0 if zynqmp, 1 if zynq. + */ +static int zynq_gpio_is_zynq(struct zynq_gpio *gpio) +{ + return !!(gpio->p_data->quirks & ZYNQ_GPIO_QUIRK_IS_ZYNQ); +} + +/** + * gpio_data_ro_bug - test if HW bug exists or not + * @gpio: Pointer to driver data struct + * + * Return: 0 if bug doesnot exist, 1 if bug exists. + */ +static int gpio_data_ro_bug(struct zynq_gpio *gpio) +{ + return !!(gpio->p_data->quirks & GPIO_QUIRK_DATA_RO_BUG); +} + +/** + * zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank + * for a given pin in the GPIO device + * @pin_num: gpio pin number within the device + * @bank_num: an output parameter used to return the bank number of the gpio + * pin + * @bank_pin_num: an output parameter used to return pin number within a bank + * for the given gpio pin + * @gpio: gpio device data structure + * + * Returns the bank number and pin offset within the bank. + */ +static inline void zynq_gpio_get_bank_pin(unsigned int pin_num, + unsigned int *bank_num, + unsigned int *bank_pin_num, + struct zynq_gpio *gpio) +{ + int bank; + + for (bank = 0; bank < gpio->p_data->max_bank; bank++) { + if ((pin_num >= gpio->p_data->bank_min[bank]) && + (pin_num <= gpio->p_data->bank_max[bank])) { + *bank_num = bank; + *bank_pin_num = pin_num - + gpio->p_data->bank_min[bank]; + return; + } + } + + /* default */ + WARN(true, "invalid GPIO pin number: %u", pin_num); + *bank_num = 0; + *bank_pin_num = 0; +} + +/** + * zynq_gpio_get_value - Get the state of the specified pin of GPIO device + * @chip: gpio_chip instance to be worked on + * @pin: gpio pin number within the device + * + * This function reads the state of the specified pin of the GPIO device. + * + * Return: 0 if the pin is low, 1 if pin is high. + */ +static int zynq_gpio_get_value(struct gpio_chip *chip, unsigned int pin) +{ + u32 data; + unsigned int bank_num, bank_pin_num; + struct zynq_gpio *gpio = gpiochip_get_data(chip); + + zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio); + + if (gpio_data_ro_bug(gpio)) { + if (zynq_gpio_is_zynq(gpio)) { + if (bank_num <= 1) { + data = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_DATA_RO_OFFSET(bank_num)); + } else { + data = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_DATA_OFFSET(bank_num)); + } + } else { + if (bank_num <= 2) { + data = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_DATA_RO_OFFSET(bank_num)); + } else { + data = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_DATA_OFFSET(bank_num)); + } + } + } else { + data = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_DATA_RO_OFFSET(bank_num)); + } + return (data >> bank_pin_num) & 1; +} + +/** + * zynq_gpio_set_value - Modify the state of the pin with specified value + * @chip: gpio_chip instance to be worked on + * @pin: gpio pin number within the device + * @state: value used to modify the state of the specified pin + * + * This function calculates the register offset (i.e to lower 16 bits or + * upper 16 bits) based on the given pin number and sets the state of a + * gpio pin to the specified value. The state is either 0 or non-zero. + */ +static void zynq_gpio_set_value(struct gpio_chip *chip, unsigned int pin, + int state) +{ + unsigned int reg_offset, bank_num, bank_pin_num; + struct zynq_gpio *gpio = gpiochip_get_data(chip); + + zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio); + + if (bank_pin_num >= ZYNQ_GPIO_MID_PIN_NUM) { + /* only 16 data bits in bit maskable reg */ + bank_pin_num -= ZYNQ_GPIO_MID_PIN_NUM; + reg_offset = ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num); + } else { + reg_offset = ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num); + } + + /* + * get the 32 bit value to be written to the mask/data register where + * the upper 16 bits is the mask and lower 16 bits is the data + */ + state = !!state; + state = ~(1 << (bank_pin_num + ZYNQ_GPIO_MID_PIN_NUM)) & + ((state << bank_pin_num) | ZYNQ_GPIO_UPPER_MASK); + + writel_relaxed(state, gpio->base_addr + reg_offset); +} + +/** + * zynq_gpio_dir_in - Set the direction of the specified GPIO pin as input + * @chip: gpio_chip instance to be worked on + * @pin: gpio pin number within the device + * + * This function uses the read-modify-write sequence to set the direction of + * the gpio pin as input. + * + * Return: 0 always + */ +static int zynq_gpio_dir_in(struct gpio_chip *chip, unsigned int pin) +{ + u32 reg; + unsigned int bank_num, bank_pin_num; + struct zynq_gpio *gpio = gpiochip_get_data(chip); + + zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio); + + /* + * On zynq bank 0 pins 7 and 8 are special and cannot be used + * as inputs. + */ + if (zynq_gpio_is_zynq(gpio) && bank_num == 0 && + (bank_pin_num == 7 || bank_pin_num == 8)) + return -EINVAL; + + /* clear the bit in direction mode reg to set the pin as input */ + reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); + reg &= ~BIT(bank_pin_num); + writel_relaxed(reg, gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); + + return 0; +} + +/** + * zynq_gpio_dir_out - Set the direction of the specified GPIO pin as output + * @chip: gpio_chip instance to be worked on + * @pin: gpio pin number within the device + * @state: value to be written to specified pin + * + * This function sets the direction of specified GPIO pin as output, configures + * the Output Enable register for the pin and uses zynq_gpio_set to set + * the state of the pin to the value specified. + * + * Return: 0 always + */ +static int zynq_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, + int state) +{ + u32 reg; + unsigned int bank_num, bank_pin_num; + struct zynq_gpio *gpio = gpiochip_get_data(chip); + + zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio); + + /* set the GPIO pin as output */ + reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); + reg |= BIT(bank_pin_num); + writel_relaxed(reg, gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); + + /* configure the output enable reg for the pin */ + reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_OUTEN_OFFSET(bank_num)); + reg |= BIT(bank_pin_num); + writel_relaxed(reg, gpio->base_addr + ZYNQ_GPIO_OUTEN_OFFSET(bank_num)); + + /* set the state of the pin */ + zynq_gpio_set_value(chip, pin, state); + return 0; +} + +/** + * zynq_gpio_get_direction - Read the direction of the specified GPIO pin + * @chip: gpio_chip instance to be worked on + * @pin: gpio pin number within the device + * + * This function returns the direction of the specified GPIO. + * + * Return: 0 for output, 1 for input + */ +static int zynq_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) +{ + u32 reg; + unsigned int bank_num, bank_pin_num; + struct zynq_gpio *gpio = gpiochip_get_data(chip); + + zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio); + + reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); + + return !(reg & BIT(bank_pin_num)); +} + +/** + * zynq_gpio_irq_mask - Disable the interrupts for a gpio pin + * @irq_data: per irq and chip data passed down to chip functions + * + * This function calculates gpio pin number from irq number and sets the + * bit in the Interrupt Disable register of the corresponding bank to disable + * interrupts for that pin. + */ +static void zynq_gpio_irq_mask(struct irq_data *irq_data) +{ + unsigned int device_pin_num, bank_num, bank_pin_num; + struct zynq_gpio *gpio = + gpiochip_get_data(irq_data_get_irq_chip_data(irq_data)); + + device_pin_num = irq_data->hwirq; + zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio); + writel_relaxed(BIT(bank_pin_num), + gpio->base_addr + ZYNQ_GPIO_INTDIS_OFFSET(bank_num)); +} + +/** + * zynq_gpio_irq_unmask - Enable the interrupts for a gpio pin + * @irq_data: irq data containing irq number of gpio pin for the interrupt + * to enable + * + * This function calculates the gpio pin number from irq number and sets the + * bit in the Interrupt Enable register of the corresponding bank to enable + * interrupts for that pin. + */ +static void zynq_gpio_irq_unmask(struct irq_data *irq_data) +{ + unsigned int device_pin_num, bank_num, bank_pin_num; + struct zynq_gpio *gpio = + gpiochip_get_data(irq_data_get_irq_chip_data(irq_data)); + + device_pin_num = irq_data->hwirq; + zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio); + writel_relaxed(BIT(bank_pin_num), + gpio->base_addr + ZYNQ_GPIO_INTEN_OFFSET(bank_num)); +} + +/** + * zynq_gpio_irq_ack - Acknowledge the interrupt of a gpio pin + * @irq_data: irq data containing irq number of gpio pin for the interrupt + * to ack + * + * This function calculates gpio pin number from irq number and sets the bit + * in the Interrupt Status Register of the corresponding bank, to ACK the irq. + */ +static void zynq_gpio_irq_ack(struct irq_data *irq_data) +{ + unsigned int device_pin_num, bank_num, bank_pin_num; + struct zynq_gpio *gpio = + gpiochip_get_data(irq_data_get_irq_chip_data(irq_data)); + + device_pin_num = irq_data->hwirq; + zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio); + writel_relaxed(BIT(bank_pin_num), + gpio->base_addr + ZYNQ_GPIO_INTSTS_OFFSET(bank_num)); +} + +/** + * zynq_gpio_irq_enable - Enable the interrupts for a gpio pin + * @irq_data: irq data containing irq number of gpio pin for the interrupt + * to enable + * + * Clears the INTSTS bit and unmasks the given interrupt. + */ +static void zynq_gpio_irq_enable(struct irq_data *irq_data) +{ + /* + * The Zynq GPIO controller does not disable interrupt detection when + * the interrupt is masked and only disables the propagation of the + * interrupt. This means when the controller detects an interrupt + * condition while the interrupt is logically disabled it will propagate + * that interrupt event once the interrupt is enabled. This will cause + * the interrupt consumer to see spurious interrupts to prevent this + * first make sure that the interrupt is not asserted and then enable + * it. + */ + zynq_gpio_irq_ack(irq_data); + zynq_gpio_irq_unmask(irq_data); +} + +/** + * zynq_gpio_set_irq_type - Set the irq type for a gpio pin + * @irq_data: irq data containing irq number of gpio pin + * @type: interrupt type that is to be set for the gpio pin + * + * This function gets the gpio pin number and its bank from the gpio pin number + * and configures the INT_TYPE, INT_POLARITY and INT_ANY registers. + * + * Return: 0, negative error otherwise. + * TYPE-EDGE_RISING, INT_TYPE - 1, INT_POLARITY - 1, INT_ANY - 0; + * TYPE-EDGE_FALLING, INT_TYPE - 1, INT_POLARITY - 0, INT_ANY - 0; + * TYPE-EDGE_BOTH, INT_TYPE - 1, INT_POLARITY - NA, INT_ANY - 1; + * TYPE-LEVEL_HIGH, INT_TYPE - 0, INT_POLARITY - 1, INT_ANY - NA; + * TYPE-LEVEL_LOW, INT_TYPE - 0, INT_POLARITY - 0, INT_ANY - NA + */ +static int zynq_gpio_set_irq_type(struct irq_data *irq_data, unsigned int type) +{ + u32 int_type, int_pol, int_any; + unsigned int device_pin_num, bank_num, bank_pin_num; + struct zynq_gpio *gpio = + gpiochip_get_data(irq_data_get_irq_chip_data(irq_data)); + + device_pin_num = irq_data->hwirq; + zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio); + + int_type = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_INTTYPE_OFFSET(bank_num)); + int_pol = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_INTPOL_OFFSET(bank_num)); + int_any = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_INTANY_OFFSET(bank_num)); + + /* + * based on the type requested, configure the INT_TYPE, INT_POLARITY + * and INT_ANY registers + */ + switch (type) { + case IRQ_TYPE_EDGE_RISING: + int_type |= BIT(bank_pin_num); + int_pol |= BIT(bank_pin_num); + int_any &= ~BIT(bank_pin_num); + break; + case IRQ_TYPE_EDGE_FALLING: + int_type |= BIT(bank_pin_num); + int_pol &= ~BIT(bank_pin_num); + int_any &= ~BIT(bank_pin_num); + break; + case IRQ_TYPE_EDGE_BOTH: + int_type |= BIT(bank_pin_num); + int_any |= BIT(bank_pin_num); + break; + case IRQ_TYPE_LEVEL_HIGH: + int_type &= ~BIT(bank_pin_num); + int_pol |= BIT(bank_pin_num); + break; + case IRQ_TYPE_LEVEL_LOW: + int_type &= ~BIT(bank_pin_num); + int_pol &= ~BIT(bank_pin_num); + break; + default: + return -EINVAL; + } + + writel_relaxed(int_type, + gpio->base_addr + ZYNQ_GPIO_INTTYPE_OFFSET(bank_num)); + writel_relaxed(int_pol, + gpio->base_addr + ZYNQ_GPIO_INTPOL_OFFSET(bank_num)); + writel_relaxed(int_any, + gpio->base_addr + ZYNQ_GPIO_INTANY_OFFSET(bank_num)); + + if (type & IRQ_TYPE_LEVEL_MASK) + irq_set_chip_handler_name_locked(irq_data, + &zynq_gpio_level_irqchip, + handle_fasteoi_irq, NULL); + else + irq_set_chip_handler_name_locked(irq_data, + &zynq_gpio_edge_irqchip, + handle_level_irq, NULL); + + return 0; +} + +static int zynq_gpio_set_wake(struct irq_data *data, unsigned int on) +{ + struct zynq_gpio *gpio = + gpiochip_get_data(irq_data_get_irq_chip_data(data)); + + irq_set_irq_wake(gpio->irq, on); + + return 0; +} + +/* irq chip descriptor */ +static struct irq_chip zynq_gpio_level_irqchip = { + .name = DRIVER_NAME, + .irq_enable = zynq_gpio_irq_enable, + .irq_eoi = zynq_gpio_irq_ack, + .irq_mask = zynq_gpio_irq_mask, + .irq_unmask = zynq_gpio_irq_unmask, + .irq_set_type = zynq_gpio_set_irq_type, + .irq_set_wake = zynq_gpio_set_wake, + .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED | + IRQCHIP_MASK_ON_SUSPEND, +}; + +static struct irq_chip zynq_gpio_edge_irqchip = { + .name = DRIVER_NAME, + .irq_enable = zynq_gpio_irq_enable, + .irq_ack = zynq_gpio_irq_ack, + .irq_mask = zynq_gpio_irq_mask, + .irq_unmask = zynq_gpio_irq_unmask, + .irq_set_type = zynq_gpio_set_irq_type, + .irq_set_wake = zynq_gpio_set_wake, + .flags = IRQCHIP_MASK_ON_SUSPEND, +}; + +static void zynq_gpio_handle_bank_irq(struct zynq_gpio *gpio, + unsigned int bank_num, + unsigned long pending) +{ + unsigned int bank_offset = gpio->p_data->bank_min[bank_num]; + struct irq_domain *irqdomain = gpio->chip.irq.domain; + int offset; + + if (!pending) + return; + + for_each_set_bit(offset, &pending, 32) { + unsigned int gpio_irq; + + gpio_irq = irq_find_mapping(irqdomain, offset + bank_offset); + generic_handle_irq(gpio_irq); + } +} + +/** + * zynq_gpio_irqhandler - IRQ handler for the gpio banks of a gpio device + * @desc: irq descriptor instance of the 'irq' + * + * This function reads the Interrupt Status Register of each bank to get the + * gpio pin number which has triggered an interrupt. It then acks the triggered + * interrupt and calls the pin specific handler set by the higher layer + * application for that pin. + * Note: A bug is reported if no handler is set for the gpio pin. + */ +static void zynq_gpio_irqhandler(struct irq_desc *desc) +{ + u32 int_sts, int_enb; + unsigned int bank_num; + struct zynq_gpio *gpio = + gpiochip_get_data(irq_desc_get_handler_data(desc)); + struct irq_chip *irqchip = irq_desc_get_chip(desc); + + chained_irq_enter(irqchip, desc); + + for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) { + int_sts = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_INTSTS_OFFSET(bank_num)); + int_enb = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_INTMASK_OFFSET(bank_num)); + zynq_gpio_handle_bank_irq(gpio, bank_num, int_sts & ~int_enb); + } + + chained_irq_exit(irqchip, desc); +} + +static void zynq_gpio_save_context(struct zynq_gpio *gpio) +{ + unsigned int bank_num; + + for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) { + gpio->context.datalsw[bank_num] = + readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num)); + gpio->context.datamsw[bank_num] = + readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num)); + gpio->context.dirm[bank_num] = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); + gpio->context.int_en[bank_num] = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_INTMASK_OFFSET(bank_num)); + gpio->context.int_type[bank_num] = + readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_INTTYPE_OFFSET(bank_num)); + gpio->context.int_polarity[bank_num] = + readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_INTPOL_OFFSET(bank_num)); + gpio->context.int_any[bank_num] = + readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_INTANY_OFFSET(bank_num)); + } +} + +static void zynq_gpio_restore_context(struct zynq_gpio *gpio) +{ + unsigned int bank_num; + + for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) { + writel_relaxed(ZYNQ_GPIO_IXR_DISABLE_ALL, gpio->base_addr + + ZYNQ_GPIO_INTDIS_OFFSET(bank_num)); + writel_relaxed(gpio->context.datalsw[bank_num], + gpio->base_addr + + ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num)); + writel_relaxed(gpio->context.datamsw[bank_num], + gpio->base_addr + + ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num)); + writel_relaxed(gpio->context.dirm[bank_num], + gpio->base_addr + + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); + writel_relaxed(gpio->context.int_type[bank_num], + gpio->base_addr + + ZYNQ_GPIO_INTTYPE_OFFSET(bank_num)); + writel_relaxed(gpio->context.int_polarity[bank_num], + gpio->base_addr + + ZYNQ_GPIO_INTPOL_OFFSET(bank_num)); + writel_relaxed(gpio->context.int_any[bank_num], + gpio->base_addr + + ZYNQ_GPIO_INTANY_OFFSET(bank_num)); + writel_relaxed(~(gpio->context.int_en[bank_num]), + gpio->base_addr + + ZYNQ_GPIO_INTEN_OFFSET(bank_num)); + } +} + +static int __maybe_unused zynq_gpio_suspend(struct device *dev) +{ + struct zynq_gpio *gpio = dev_get_drvdata(dev); + struct irq_data *data = irq_get_irq_data(gpio->irq); + + if (!irqd_is_wakeup_set(data)) { + zynq_gpio_save_context(gpio); + return pm_runtime_force_suspend(dev); + } + + return 0; +} + +static int __maybe_unused zynq_gpio_resume(struct device *dev) +{ + struct zynq_gpio *gpio = dev_get_drvdata(dev); + struct irq_data *data = irq_get_irq_data(gpio->irq); + int ret; + + if (!irqd_is_wakeup_set(data)) { + ret = pm_runtime_force_resume(dev); + zynq_gpio_restore_context(gpio); + return ret; + } + + return 0; +} + +static int __maybe_unused zynq_gpio_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct zynq_gpio *gpio = platform_get_drvdata(pdev); + + clk_disable_unprepare(gpio->clk); + + return 0; +} + +static int __maybe_unused zynq_gpio_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct zynq_gpio *gpio = platform_get_drvdata(pdev); + + return clk_prepare_enable(gpio->clk); +} + +static int zynq_gpio_request(struct gpio_chip *chip, unsigned int offset) +{ + int ret; + + ret = pm_runtime_get_sync(chip->parent); + + /* + * If the device is already active pm_runtime_get() will return 1 on + * success, but gpio_request still needs to return 0. + */ + return ret < 0 ? ret : 0; +} + +static void zynq_gpio_free(struct gpio_chip *chip, unsigned int offset) +{ + pm_runtime_put(chip->parent); +} + +static const struct dev_pm_ops zynq_gpio_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(zynq_gpio_suspend, zynq_gpio_resume) + SET_RUNTIME_PM_OPS(zynq_gpio_runtime_suspend, + zynq_gpio_runtime_resume, NULL) +}; + +static const struct zynq_platform_data zynqmp_gpio_def = { + .label = "zynqmp_gpio", + .quirks = GPIO_QUIRK_DATA_RO_BUG, + .ngpio = ZYNQMP_GPIO_NR_GPIOS, + .max_bank = ZYNQMP_GPIO_MAX_BANK, + .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(MP), + .bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(MP), + .bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(MP), + .bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(MP), + .bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(MP), + .bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(MP), + .bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(MP), + .bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(MP), + .bank_min[4] = ZYNQ_GPIO_BANK4_PIN_MIN(MP), + .bank_max[4] = ZYNQ_GPIO_BANK4_PIN_MAX(MP), + .bank_min[5] = ZYNQ_GPIO_BANK5_PIN_MIN(MP), + .bank_max[5] = ZYNQ_GPIO_BANK5_PIN_MAX(MP), +}; + +static const struct zynq_platform_data zynq_gpio_def = { + .label = "zynq_gpio", + .quirks = ZYNQ_GPIO_QUIRK_IS_ZYNQ | GPIO_QUIRK_DATA_RO_BUG, + .ngpio = ZYNQ_GPIO_NR_GPIOS, + .max_bank = ZYNQ_GPIO_MAX_BANK, + .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(), + .bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(), + .bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(), + .bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(), + .bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(), + .bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(), + .bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(), + .bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(), +}; + +static const struct of_device_id zynq_gpio_of_match[] = { + { .compatible = "xlnx,zynq-gpio-1.0", .data = &zynq_gpio_def }, + { .compatible = "xlnx,zynqmp-gpio-1.0", .data = &zynqmp_gpio_def }, + { /* end of table */ } +}; +MODULE_DEVICE_TABLE(of, zynq_gpio_of_match); + +/** + * zynq_gpio_probe - Initialization method for a zynq_gpio device + * @pdev: platform device instance + * + * This function allocates memory resources for the gpio device and registers + * all the banks of the device. It will also set up interrupts for the gpio + * pins. + * Note: Interrupts are disabled for all the banks during initialization. + * + * Return: 0 on success, negative error otherwise. + */ +static int zynq_gpio_probe(struct platform_device *pdev) +{ + int ret, bank_num; + struct zynq_gpio *gpio; + struct gpio_chip *chip; + struct resource *res; + const struct of_device_id *match; + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + match = of_match_node(zynq_gpio_of_match, pdev->dev.of_node); + if (!match) { + dev_err(&pdev->dev, "of_match_node() failed\n"); + return -EINVAL; + } + gpio->p_data = match->data; + platform_set_drvdata(pdev, gpio); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gpio->base_addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(gpio->base_addr)) + return PTR_ERR(gpio->base_addr); + + gpio->irq = platform_get_irq(pdev, 0); + if (gpio->irq < 0) { + dev_err(&pdev->dev, "invalid IRQ\n"); + return gpio->irq; + } + + /* configure the gpio chip */ + chip = &gpio->chip; + chip->label = gpio->p_data->label; + chip->owner = THIS_MODULE; + chip->parent = &pdev->dev; + chip->get = zynq_gpio_get_value; + chip->set = zynq_gpio_set_value; + chip->request = zynq_gpio_request; + chip->free = zynq_gpio_free; + chip->direction_input = zynq_gpio_dir_in; + chip->direction_output = zynq_gpio_dir_out; + chip->get_direction = zynq_gpio_get_direction; + chip->base = of_alias_get_id(pdev->dev.of_node, "gpio"); + chip->ngpio = gpio->p_data->ngpio; + + /* Retrieve GPIO clock */ + gpio->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(gpio->clk)) { + dev_err(&pdev->dev, "input clock not found.\n"); + return PTR_ERR(gpio->clk); + } + ret = clk_prepare_enable(gpio->clk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable clock.\n"); + return ret; + } + + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + ret = pm_runtime_get_sync(&pdev->dev); + if (ret < 0) + goto err_pm_dis; + + /* report a bug if gpio chip registration fails */ + ret = gpiochip_add_data(chip, gpio); + if (ret) { + dev_err(&pdev->dev, "Failed to add gpio chip\n"); + goto err_pm_put; + } + + /* disable interrupts for all banks */ + for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) + writel_relaxed(ZYNQ_GPIO_IXR_DISABLE_ALL, gpio->base_addr + + ZYNQ_GPIO_INTDIS_OFFSET(bank_num)); + + ret = gpiochip_irqchip_add(chip, &zynq_gpio_edge_irqchip, 0, + handle_level_irq, IRQ_TYPE_NONE); + if (ret) { + dev_err(&pdev->dev, "Failed to add irq chip\n"); + goto err_rm_gpiochip; + } + + gpiochip_set_chained_irqchip(chip, &zynq_gpio_edge_irqchip, gpio->irq, + zynq_gpio_irqhandler); + + pm_runtime_put(&pdev->dev); + + return 0; + +err_rm_gpiochip: + gpiochip_remove(chip); +err_pm_put: + pm_runtime_put(&pdev->dev); +err_pm_dis: + pm_runtime_disable(&pdev->dev); + clk_disable_unprepare(gpio->clk); + + return ret; +} + +/** + * zynq_gpio_remove - Driver removal function + * @pdev: platform device instance + * + * Return: 0 always + */ +static int zynq_gpio_remove(struct platform_device *pdev) +{ + struct zynq_gpio *gpio = platform_get_drvdata(pdev); + int ret; + + ret = pm_runtime_get_sync(&pdev->dev); + if (ret < 0) + dev_warn(&pdev->dev, "pm_runtime_get_sync() Failed\n"); + gpiochip_remove(&gpio->chip); + clk_disable_unprepare(gpio->clk); + device_set_wakeup_capable(&pdev->dev, 0); + pm_runtime_disable(&pdev->dev); + return 0; +} + +static struct platform_driver zynq_gpio_driver = { + .driver = { + .name = DRIVER_NAME, + .pm = &zynq_gpio_dev_pm_ops, + .of_match_table = zynq_gpio_of_match, + }, + .probe = zynq_gpio_probe, + .remove = zynq_gpio_remove, +}; + +/** + * zynq_gpio_init - Initial driver registration call + * + * Return: value from platform_driver_register + */ +static int __init zynq_gpio_init(void) +{ + return platform_driver_register(&zynq_gpio_driver); +} +postcore_initcall(zynq_gpio_init); + +static void __exit zynq_gpio_exit(void) +{ + platform_driver_unregister(&zynq_gpio_driver); +} +module_exit(zynq_gpio_exit); + +MODULE_AUTHOR("Xilinx Inc."); +MODULE_DESCRIPTION("Zynq GPIO driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c new file mode 100644 index 000000000..6afe83303 --- /dev/null +++ b/drivers/gpio/gpiolib-acpi.c @@ -0,0 +1,1456 @@ +/* + * ACPI helpers for GPIO API + * + * Copyright (C) 2012, Intel Corporation + * Authors: Mathias Nyman <mathias.nyman@linux.intel.com> + * Mika Westerberg <mika.westerberg@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/dmi.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/machine.h> +#include <linux/export.h> +#include <linux/acpi.h> +#include <linux/interrupt.h> +#include <linux/mutex.h> +#include <linux/pinctrl/pinctrl.h> + +#include "gpiolib.h" + +static int run_edge_events_on_boot = -1; +module_param(run_edge_events_on_boot, int, 0444); +MODULE_PARM_DESC(run_edge_events_on_boot, + "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto"); + +static char *ignore_wake; +module_param(ignore_wake, charp, 0444); +MODULE_PARM_DESC(ignore_wake, + "controller@pin combos on which to ignore the ACPI wake flag " + "ignore_wake=controller@pin[,controller@pin[,...]]"); + +struct acpi_gpiolib_dmi_quirk { + bool no_edge_events_on_boot; + char *ignore_wake; +}; + +/** + * struct acpi_gpio_event - ACPI GPIO event handler data + * + * @node: list-entry of the events list of the struct acpi_gpio_chip + * @handle: handle of ACPI method to execute when the IRQ triggers + * @handler: irq_handler to pass to request_irq when requesting the IRQ + * @pin: GPIO pin number on the gpio_chip + * @irq: Linux IRQ number for the event, for request_ / free_irq + * @irqflags: flags to pass to request_irq when requesting the IRQ + * @irq_is_wake: If the ACPI flags indicate the IRQ is a wakeup source + * @is_requested: True if request_irq has been done + * @desc: gpio_desc for the GPIO pin for this event + */ +struct acpi_gpio_event { + struct list_head node; + acpi_handle handle; + irq_handler_t handler; + unsigned int pin; + unsigned int irq; + unsigned long irqflags; + bool irq_is_wake; + bool irq_requested; + struct gpio_desc *desc; +}; + +struct acpi_gpio_connection { + struct list_head node; + unsigned int pin; + struct gpio_desc *desc; +}; + +struct acpi_gpio_chip { + /* + * ACPICA requires that the first field of the context parameter + * passed to acpi_install_address_space_handler() is large enough + * to hold struct acpi_connection_info. + */ + struct acpi_connection_info conn_info; + struct list_head conns; + struct mutex conn_lock; + struct gpio_chip *chip; + struct list_head events; + struct list_head deferred_req_irqs_list_entry; +}; + +/* + * For gpiochips which call acpi_gpiochip_request_interrupts() before late_init + * (so builtin drivers) we register the ACPI GpioInt IRQ handlers from a + * late_initcall_sync handler, so that other builtin drivers can register their + * OpRegions before the event handlers can run. This list contains gpiochips + * for which the acpi_gpiochip_request_irqs() call has been deferred. + */ +static DEFINE_MUTEX(acpi_gpio_deferred_req_irqs_lock); +static LIST_HEAD(acpi_gpio_deferred_req_irqs_list); +static bool acpi_gpio_deferred_req_irqs_done; + +static int acpi_gpiochip_find(struct gpio_chip *gc, void *data) +{ + if (!gc->parent) + return false; + + return ACPI_HANDLE(gc->parent) == data; +} + +/** + * acpi_get_gpiod() - Translate ACPI GPIO pin to GPIO descriptor usable with GPIO API + * @path: ACPI GPIO controller full path name, (e.g. "\\_SB.GPO1") + * @pin: ACPI GPIO pin number (0-based, controller-relative) + * + * Return: GPIO descriptor to use with Linux generic GPIO API, or ERR_PTR + * error value. Specifically returns %-EPROBE_DEFER if the referenced GPIO + * controller does not have gpiochip registered at the moment. This is to + * support probe deferral. + */ +static struct gpio_desc *acpi_get_gpiod(char *path, int pin) +{ + struct gpio_chip *chip; + acpi_handle handle; + acpi_status status; + + status = acpi_get_handle(NULL, path, &handle); + if (ACPI_FAILURE(status)) + return ERR_PTR(-ENODEV); + + chip = gpiochip_find(handle, acpi_gpiochip_find); + if (!chip) + return ERR_PTR(-EPROBE_DEFER); + + return gpiochip_get_desc(chip, pin); +} + +static irqreturn_t acpi_gpio_irq_handler(int irq, void *data) +{ + struct acpi_gpio_event *event = data; + + acpi_evaluate_object(event->handle, NULL, NULL, NULL); + + return IRQ_HANDLED; +} + +static irqreturn_t acpi_gpio_irq_handler_evt(int irq, void *data) +{ + struct acpi_gpio_event *event = data; + + acpi_execute_simple_method(event->handle, NULL, event->pin); + + return IRQ_HANDLED; +} + +static void acpi_gpio_chip_dh(acpi_handle handle, void *data) +{ + /* The address of this function is used as a key. */ +} + +bool acpi_gpio_get_irq_resource(struct acpi_resource *ares, + struct acpi_resource_gpio **agpio) +{ + struct acpi_resource_gpio *gpio; + + if (ares->type != ACPI_RESOURCE_TYPE_GPIO) + return false; + + gpio = &ares->data.gpio; + if (gpio->connection_type != ACPI_RESOURCE_GPIO_TYPE_INT) + return false; + + *agpio = gpio; + return true; +} +EXPORT_SYMBOL_GPL(acpi_gpio_get_irq_resource); + +static void acpi_gpiochip_request_irq(struct acpi_gpio_chip *acpi_gpio, + struct acpi_gpio_event *event) +{ + int ret, value; + + ret = request_threaded_irq(event->irq, NULL, event->handler, + event->irqflags | IRQF_ONESHOT, "ACPI:Event", event); + if (ret) { + dev_err(acpi_gpio->chip->parent, + "Failed to setup interrupt handler for %d\n", + event->irq); + return; + } + + if (event->irq_is_wake) + enable_irq_wake(event->irq); + + event->irq_requested = true; + + /* Make sure we trigger the initial state of edge-triggered IRQs */ + if (run_edge_events_on_boot && + (event->irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))) { + value = gpiod_get_raw_value_cansleep(event->desc); + if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) || + ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0)) + event->handler(event->irq, event); + } +} + +static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio) +{ + struct acpi_gpio_event *event; + + list_for_each_entry(event, &acpi_gpio->events, node) + acpi_gpiochip_request_irq(acpi_gpio, event); +} + +static bool acpi_gpio_in_ignore_list(const char *controller_in, int pin_in) +{ + const char *controller, *pin_str; + int len, pin; + char *endp; + + controller = ignore_wake; + while (controller) { + pin_str = strchr(controller, '@'); + if (!pin_str) + goto err; + + len = pin_str - controller; + if (len == strlen(controller_in) && + strncmp(controller, controller_in, len) == 0) { + pin = simple_strtoul(pin_str + 1, &endp, 10); + if (*endp != 0 && *endp != ',') + goto err; + + if (pin == pin_in) + return true; + } + + controller = strchr(controller, ','); + if (controller) + controller++; + } + + return false; +err: + pr_err_once("Error invalid value for gpiolib_acpi.ignore_wake: %s\n", + ignore_wake); + return false; +} + +static bool acpi_gpio_irq_is_wake(struct device *parent, + struct acpi_resource_gpio *agpio) +{ + int pin = agpio->pin_table[0]; + + if (agpio->wake_capable != ACPI_WAKE_CAPABLE) + return false; + + if (acpi_gpio_in_ignore_list(dev_name(parent), pin)) { + dev_info(parent, "Ignoring wakeup on pin %d\n", pin); + return false; + } + + return true; +} + +static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares, + void *context) +{ + struct acpi_gpio_chip *acpi_gpio = context; + struct gpio_chip *chip = acpi_gpio->chip; + struct acpi_resource_gpio *agpio; + acpi_handle handle, evt_handle; + struct acpi_gpio_event *event; + irq_handler_t handler = NULL; + struct gpio_desc *desc; + int ret, pin, irq; + + if (!acpi_gpio_get_irq_resource(ares, &agpio)) + return AE_OK; + + handle = ACPI_HANDLE(chip->parent); + pin = agpio->pin_table[0]; + + if (pin <= 255) { + char ev_name[8]; + sprintf(ev_name, "_%c%02X", + agpio->triggering == ACPI_EDGE_SENSITIVE ? 'E' : 'L', + pin); + if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle))) + handler = acpi_gpio_irq_handler; + } + if (!handler) { + if (ACPI_SUCCESS(acpi_get_handle(handle, "_EVT", &evt_handle))) + handler = acpi_gpio_irq_handler_evt; + } + if (!handler) + return AE_OK; + + desc = gpiochip_request_own_desc(chip, pin, "ACPI:Event"); + if (IS_ERR(desc)) { + dev_err(chip->parent, "Failed to request GPIO\n"); + return AE_ERROR; + } + + gpiod_direction_input(desc); + + ret = gpiochip_lock_as_irq(chip, pin); + if (ret) { + dev_err(chip->parent, "Failed to lock GPIO as interrupt\n"); + goto fail_free_desc; + } + + irq = gpiod_to_irq(desc); + if (irq < 0) { + dev_err(chip->parent, "Failed to translate GPIO to IRQ\n"); + goto fail_unlock_irq; + } + + event = kzalloc(sizeof(*event), GFP_KERNEL); + if (!event) + goto fail_unlock_irq; + + event->irqflags = IRQF_ONESHOT; + if (agpio->triggering == ACPI_LEVEL_SENSITIVE) { + if (agpio->polarity == ACPI_ACTIVE_HIGH) + event->irqflags |= IRQF_TRIGGER_HIGH; + else + event->irqflags |= IRQF_TRIGGER_LOW; + } else { + switch (agpio->polarity) { + case ACPI_ACTIVE_HIGH: + event->irqflags |= IRQF_TRIGGER_RISING; + break; + case ACPI_ACTIVE_LOW: + event->irqflags |= IRQF_TRIGGER_FALLING; + break; + default: + event->irqflags |= IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING; + break; + } + } + + event->handle = evt_handle; + event->handler = handler; + event->irq = irq; + event->irq_is_wake = acpi_gpio_irq_is_wake(chip->parent, agpio); + event->pin = pin; + event->desc = desc; + + list_add_tail(&event->node, &acpi_gpio->events); + + return AE_OK; + +fail_unlock_irq: + gpiochip_unlock_as_irq(chip, pin); +fail_free_desc: + gpiochip_free_own_desc(desc); + + return AE_ERROR; +} + +/** + * acpi_gpiochip_request_interrupts() - Register isr for gpio chip ACPI events + * @chip: GPIO chip + * + * ACPI5 platforms can use GPIO signaled ACPI events. These GPIO interrupts are + * handled by ACPI event methods which need to be called from the GPIO + * chip's interrupt handler. acpi_gpiochip_request_interrupts finds out which + * gpio pins have acpi event methods and assigns interrupt handlers that calls + * the acpi event methods for those pins. + */ +void acpi_gpiochip_request_interrupts(struct gpio_chip *chip) +{ + struct acpi_gpio_chip *acpi_gpio; + acpi_handle handle; + acpi_status status; + bool defer; + + if (!chip->parent || !chip->to_irq) + return; + + handle = ACPI_HANDLE(chip->parent); + if (!handle) + return; + + status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio); + if (ACPI_FAILURE(status)) + return; + + acpi_walk_resources(handle, "_AEI", + acpi_gpiochip_alloc_event, acpi_gpio); + + mutex_lock(&acpi_gpio_deferred_req_irqs_lock); + defer = !acpi_gpio_deferred_req_irqs_done; + if (defer) + list_add(&acpi_gpio->deferred_req_irqs_list_entry, + &acpi_gpio_deferred_req_irqs_list); + mutex_unlock(&acpi_gpio_deferred_req_irqs_lock); + + if (defer) + return; + + acpi_gpiochip_request_irqs(acpi_gpio); +} +EXPORT_SYMBOL_GPL(acpi_gpiochip_request_interrupts); + +/** + * acpi_gpiochip_free_interrupts() - Free GPIO ACPI event interrupts. + * @chip: GPIO chip + * + * Free interrupts associated with GPIO ACPI event method for the given + * GPIO chip. + */ +void acpi_gpiochip_free_interrupts(struct gpio_chip *chip) +{ + struct acpi_gpio_chip *acpi_gpio; + struct acpi_gpio_event *event, *ep; + acpi_handle handle; + acpi_status status; + + if (!chip->parent || !chip->to_irq) + return; + + handle = ACPI_HANDLE(chip->parent); + if (!handle) + return; + + status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio); + if (ACPI_FAILURE(status)) + return; + + mutex_lock(&acpi_gpio_deferred_req_irqs_lock); + if (!list_empty(&acpi_gpio->deferred_req_irqs_list_entry)) + list_del_init(&acpi_gpio->deferred_req_irqs_list_entry); + mutex_unlock(&acpi_gpio_deferred_req_irqs_lock); + + list_for_each_entry_safe_reverse(event, ep, &acpi_gpio->events, node) { + struct gpio_desc *desc; + + if (event->irq_requested) { + if (event->irq_is_wake) + disable_irq_wake(event->irq); + + free_irq(event->irq, event); + } + + desc = event->desc; + if (WARN_ON(IS_ERR(desc))) + continue; + gpiochip_unlock_as_irq(chip, event->pin); + gpiochip_free_own_desc(desc); + list_del(&event->node); + kfree(event); + } +} +EXPORT_SYMBOL_GPL(acpi_gpiochip_free_interrupts); + +int acpi_dev_add_driver_gpios(struct acpi_device *adev, + const struct acpi_gpio_mapping *gpios) +{ + if (adev && gpios) { + adev->driver_gpios = gpios; + return 0; + } + return -EINVAL; +} +EXPORT_SYMBOL_GPL(acpi_dev_add_driver_gpios); + +static void devm_acpi_dev_release_driver_gpios(struct device *dev, void *res) +{ + acpi_dev_remove_driver_gpios(ACPI_COMPANION(dev)); +} + +int devm_acpi_dev_add_driver_gpios(struct device *dev, + const struct acpi_gpio_mapping *gpios) +{ + void *res; + int ret; + + res = devres_alloc(devm_acpi_dev_release_driver_gpios, 0, GFP_KERNEL); + if (!res) + return -ENOMEM; + + ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), gpios); + if (ret) { + devres_free(res); + return ret; + } + devres_add(dev, res); + return 0; +} +EXPORT_SYMBOL_GPL(devm_acpi_dev_add_driver_gpios); + +void devm_acpi_dev_remove_driver_gpios(struct device *dev) +{ + WARN_ON(devres_release(dev, devm_acpi_dev_release_driver_gpios, NULL, NULL)); +} +EXPORT_SYMBOL_GPL(devm_acpi_dev_remove_driver_gpios); + +static bool acpi_get_driver_gpio_data(struct acpi_device *adev, + const char *name, int index, + struct fwnode_reference_args *args, + unsigned int *quirks) +{ + const struct acpi_gpio_mapping *gm; + + if (!adev->driver_gpios) + return false; + + for (gm = adev->driver_gpios; gm->name; gm++) + if (!strcmp(name, gm->name) && gm->data && index < gm->size) { + const struct acpi_gpio_params *par = gm->data + index; + + args->fwnode = acpi_fwnode_handle(adev); + args->args[0] = par->crs_entry_index; + args->args[1] = par->line_index; + args->args[2] = par->active_low; + args->nargs = 3; + + *quirks = gm->quirks; + return true; + } + + return false; +} + +static enum gpiod_flags +acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio) +{ + bool pull_up = agpio->pin_config == ACPI_PIN_CONFIG_PULLUP; + + switch (agpio->io_restriction) { + case ACPI_IO_RESTRICT_INPUT: + return GPIOD_IN; + case ACPI_IO_RESTRICT_OUTPUT: + /* + * ACPI GPIO resources don't contain an initial value for the + * GPIO. Therefore we deduce that value from the pull field + * instead. If the pin is pulled up we assume default to be + * high, otherwise low. + */ + return pull_up ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; + default: + /* + * Assume that the BIOS has configured the direction and pull + * accordingly. + */ + return GPIOD_ASIS; + } +} + +static int +__acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, enum gpiod_flags update) +{ + int ret = 0; + + /* + * Check if the BIOS has IoRestriction with explicitly set direction + * and update @flags accordingly. Otherwise use whatever caller asked + * for. + */ + if (update & GPIOD_FLAGS_BIT_DIR_SET) { + enum gpiod_flags diff = *flags ^ update; + + /* + * Check if caller supplied incompatible GPIO initialization + * flags. + * + * Return %-EINVAL to notify that firmware has different + * settings and we are going to use them. + */ + if (((*flags & GPIOD_FLAGS_BIT_DIR_SET) && (diff & GPIOD_FLAGS_BIT_DIR_OUT)) || + ((*flags & GPIOD_FLAGS_BIT_DIR_OUT) && (diff & GPIOD_FLAGS_BIT_DIR_VAL))) + ret = -EINVAL; + *flags = update; + } + return ret; +} + +int +acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, struct acpi_gpio_info *info) +{ + struct device *dev = &info->adev->dev; + enum gpiod_flags old = *flags; + int ret; + + ret = __acpi_gpio_update_gpiod_flags(&old, info->flags); + if (info->quirks & ACPI_GPIO_QUIRK_NO_IO_RESTRICTION) { + if (ret) + dev_warn(dev, FW_BUG "GPIO not in correct mode, fixing\n"); + } else { + if (ret) + dev_dbg(dev, "Override GPIO initialization flags\n"); + *flags = old; + } + + return ret; +} + +struct acpi_gpio_lookup { + struct acpi_gpio_info info; + int index; + int pin_index; + bool active_low; + struct gpio_desc *desc; + int n; +}; + +static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data) +{ + struct acpi_gpio_lookup *lookup = data; + + if (ares->type != ACPI_RESOURCE_TYPE_GPIO) + return 1; + + if (lookup->n++ == lookup->index && !lookup->desc) { + const struct acpi_resource_gpio *agpio = &ares->data.gpio; + int pin_index = lookup->pin_index; + + if (pin_index >= agpio->pin_table_length) + return 1; + + lookup->desc = acpi_get_gpiod(agpio->resource_source.string_ptr, + agpio->pin_table[pin_index]); + lookup->info.gpioint = + agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT; + + /* + * Polarity and triggering are only specified for GpioInt + * resource. + * Note: we expect here: + * - ACPI_ACTIVE_LOW == GPIO_ACTIVE_LOW + * - ACPI_ACTIVE_HIGH == GPIO_ACTIVE_HIGH + */ + if (lookup->info.gpioint) { + lookup->info.flags = GPIOD_IN; + lookup->info.polarity = agpio->polarity; + lookup->info.triggering = agpio->triggering; + } else { + lookup->info.flags = acpi_gpio_to_gpiod_flags(agpio); + lookup->info.polarity = lookup->active_low; + } + } + + return 1; +} + +static int acpi_gpio_resource_lookup(struct acpi_gpio_lookup *lookup, + struct acpi_gpio_info *info) +{ + struct acpi_device *adev = lookup->info.adev; + struct list_head res_list; + int ret; + + INIT_LIST_HEAD(&res_list); + + ret = acpi_dev_get_resources(adev, &res_list, + acpi_populate_gpio_lookup, + lookup); + if (ret < 0) + return ret; + + acpi_dev_free_resource_list(&res_list); + + if (!lookup->desc) + return -ENOENT; + + if (info) + *info = lookup->info; + return 0; +} + +static int acpi_gpio_property_lookup(struct fwnode_handle *fwnode, + const char *propname, int index, + struct acpi_gpio_lookup *lookup) +{ + struct fwnode_reference_args args; + unsigned int quirks = 0; + int ret; + + memset(&args, 0, sizeof(args)); + ret = __acpi_node_get_property_reference(fwnode, propname, index, 3, + &args); + if (ret) { + struct acpi_device *adev = to_acpi_device_node(fwnode); + + if (!adev) + return ret; + + if (!acpi_get_driver_gpio_data(adev, propname, index, &args, + &quirks)) + return ret; + } + /* + * The property was found and resolved, so need to lookup the GPIO based + * on returned args. + */ + if (!to_acpi_device_node(args.fwnode)) + return -EINVAL; + if (args.nargs != 3) + return -EPROTO; + + lookup->index = args.args[0]; + lookup->pin_index = args.args[1]; + lookup->active_low = !!args.args[2]; + + lookup->info.adev = to_acpi_device_node(args.fwnode); + lookup->info.quirks = quirks; + + return 0; +} + +/** + * acpi_get_gpiod_by_index() - get a GPIO descriptor from device resources + * @adev: pointer to a ACPI device to get GPIO from + * @propname: Property name of the GPIO (optional) + * @index: index of GpioIo/GpioInt resource (starting from %0) + * @info: info pointer to fill in (optional) + * + * Function goes through ACPI resources for @adev and based on @index looks + * up a GpioIo/GpioInt resource, translates it to the Linux GPIO descriptor, + * and returns it. @index matches GpioIo/GpioInt resources only so if there + * are total %3 GPIO resources, the index goes from %0 to %2. + * + * If @propname is specified the GPIO is looked using device property. In + * that case @index is used to select the GPIO entry in the property value + * (in case of multiple). + * + * If the GPIO cannot be translated or there is an error an ERR_PTR is + * returned. + * + * Note: if the GPIO resource has multiple entries in the pin list, this + * function only returns the first. + */ +static struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev, + const char *propname, int index, + struct acpi_gpio_info *info) +{ + struct acpi_gpio_lookup lookup; + int ret; + + if (!adev) + return ERR_PTR(-ENODEV); + + memset(&lookup, 0, sizeof(lookup)); + lookup.index = index; + + if (propname) { + dev_dbg(&adev->dev, "GPIO: looking up %s\n", propname); + + ret = acpi_gpio_property_lookup(acpi_fwnode_handle(adev), + propname, index, &lookup); + if (ret) + return ERR_PTR(ret); + + dev_dbg(&adev->dev, "GPIO: _DSD returned %s %d %d %u\n", + dev_name(&lookup.info.adev->dev), lookup.index, + lookup.pin_index, lookup.active_low); + } else { + dev_dbg(&adev->dev, "GPIO: looking up %d in _CRS\n", index); + lookup.info.adev = adev; + } + + ret = acpi_gpio_resource_lookup(&lookup, info); + return ret ? ERR_PTR(ret) : lookup.desc; +} + +struct gpio_desc *acpi_find_gpio(struct device *dev, + const char *con_id, + unsigned int idx, + enum gpiod_flags *dflags, + enum gpio_lookup_flags *lookupflags) +{ + struct acpi_device *adev = ACPI_COMPANION(dev); + struct acpi_gpio_info info; + struct gpio_desc *desc; + char propname[32]; + int i; + + /* Try first from _DSD */ + for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) { + if (con_id) { + snprintf(propname, sizeof(propname), "%s-%s", + con_id, gpio_suffixes[i]); + } else { + snprintf(propname, sizeof(propname), "%s", + gpio_suffixes[i]); + } + + desc = acpi_get_gpiod_by_index(adev, propname, idx, &info); + if (!IS_ERR(desc)) + break; + if (PTR_ERR(desc) == -EPROBE_DEFER) + return ERR_CAST(desc); + } + + /* Then from plain _CRS GPIOs */ + if (IS_ERR(desc)) { + if (!acpi_can_fallback_to_crs(adev, con_id)) + return ERR_PTR(-ENOENT); + + desc = acpi_get_gpiod_by_index(adev, NULL, idx, &info); + if (IS_ERR(desc)) + return desc; + } + + if (info.gpioint && + (*dflags == GPIOD_OUT_LOW || *dflags == GPIOD_OUT_HIGH)) { + dev_dbg(dev, "refusing GpioInt() entry when doing GPIOD_OUT_* lookup\n"); + return ERR_PTR(-ENOENT); + } + + if (info.polarity == GPIO_ACTIVE_LOW) + *lookupflags |= GPIO_ACTIVE_LOW; + + acpi_gpio_update_gpiod_flags(dflags, &info); + return desc; +} + +/** + * acpi_node_get_gpiod() - get a GPIO descriptor from ACPI resources + * @fwnode: pointer to an ACPI firmware node to get the GPIO information from + * @propname: Property name of the GPIO + * @index: index of GpioIo/GpioInt resource (starting from %0) + * @info: info pointer to fill in (optional) + * + * If @fwnode is an ACPI device object, call %acpi_get_gpiod_by_index() for it. + * Otherwise (ie. it is a data-only non-device object), use the property-based + * GPIO lookup to get to the GPIO resource with the relevant information and use + * that to obtain the GPIO descriptor to return. + */ +struct gpio_desc *acpi_node_get_gpiod(struct fwnode_handle *fwnode, + const char *propname, int index, + struct acpi_gpio_info *info) +{ + struct acpi_gpio_lookup lookup; + struct acpi_device *adev; + int ret; + + adev = to_acpi_device_node(fwnode); + if (adev) + return acpi_get_gpiod_by_index(adev, propname, index, info); + + if (!is_acpi_data_node(fwnode)) + return ERR_PTR(-ENODEV); + + if (!propname) + return ERR_PTR(-EINVAL); + + memset(&lookup, 0, sizeof(lookup)); + lookup.index = index; + + ret = acpi_gpio_property_lookup(fwnode, propname, index, &lookup); + if (ret) + return ERR_PTR(ret); + + ret = acpi_gpio_resource_lookup(&lookup, info); + return ret ? ERR_PTR(ret) : lookup.desc; +} + +/** + * acpi_dev_gpio_irq_get() - Find GpioInt and translate it to Linux IRQ number + * @adev: pointer to a ACPI device to get IRQ from + * @index: index of GpioInt resource (starting from %0) + * + * If the device has one or more GpioInt resources, this function can be + * used to translate from the GPIO offset in the resource to the Linux IRQ + * number. + * + * The function is idempotent, though each time it runs it will configure GPIO + * pin direction according to the flags in GpioInt resource. + * + * Return: Linux IRQ number (> %0) on success, negative errno on failure. + */ +int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index) +{ + int idx, i; + unsigned int irq_flags; + int ret; + + for (i = 0, idx = 0; idx <= index; i++) { + struct acpi_gpio_info info; + struct gpio_desc *desc; + + desc = acpi_get_gpiod_by_index(adev, NULL, i, &info); + + /* Ignore -EPROBE_DEFER, it only matters if idx matches */ + if (IS_ERR(desc) && PTR_ERR(desc) != -EPROBE_DEFER) + return PTR_ERR(desc); + + if (info.gpioint && idx++ == index) { + char label[32]; + int irq; + + if (IS_ERR(desc)) + return PTR_ERR(desc); + + irq = gpiod_to_irq(desc); + if (irq < 0) + return irq; + + snprintf(label, sizeof(label), "GpioInt() %d", index); + ret = gpiod_configure_flags(desc, label, 0, info.flags); + if (ret < 0) + return ret; + + irq_flags = acpi_dev_get_irq_type(info.triggering, + info.polarity); + + /* + * If the IRQ is not already in use then set type + * if specified and different than the current one. + */ + if (can_request_irq(irq, irq_flags)) { + if (irq_flags != IRQ_TYPE_NONE && + irq_flags != irq_get_trigger_type(irq)) + irq_set_irq_type(irq, irq_flags); + } else { + dev_dbg(&adev->dev, "IRQ %d already in use\n", irq); + } + + return irq; + } + + } + return -ENOENT; +} +EXPORT_SYMBOL_GPL(acpi_dev_gpio_irq_get); + +static acpi_status +acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address, + u32 bits, u64 *value, void *handler_context, + void *region_context) +{ + struct acpi_gpio_chip *achip = region_context; + struct gpio_chip *chip = achip->chip; + struct acpi_resource_gpio *agpio; + struct acpi_resource *ares; + int pin_index = (int)address; + acpi_status status; + int length; + int i; + + status = acpi_buffer_to_resource(achip->conn_info.connection, + achip->conn_info.length, &ares); + if (ACPI_FAILURE(status)) + return status; + + if (WARN_ON(ares->type != ACPI_RESOURCE_TYPE_GPIO)) { + ACPI_FREE(ares); + return AE_BAD_PARAMETER; + } + + agpio = &ares->data.gpio; + + if (WARN_ON(agpio->io_restriction == ACPI_IO_RESTRICT_INPUT && + function == ACPI_WRITE)) { + ACPI_FREE(ares); + return AE_BAD_PARAMETER; + } + + length = min(agpio->pin_table_length, (u16)(pin_index + bits)); + for (i = pin_index; i < length; ++i) { + int pin = agpio->pin_table[i]; + struct acpi_gpio_connection *conn; + struct gpio_desc *desc; + bool found; + + mutex_lock(&achip->conn_lock); + + found = false; + list_for_each_entry(conn, &achip->conns, node) { + if (conn->pin == pin) { + found = true; + desc = conn->desc; + break; + } + } + + /* + * The same GPIO can be shared between operation region and + * event but only if the access here is ACPI_READ. In that + * case we "borrow" the event GPIO instead. + */ + if (!found && agpio->sharable == ACPI_SHARED && + function == ACPI_READ) { + struct acpi_gpio_event *event; + + list_for_each_entry(event, &achip->events, node) { + if (event->pin == pin) { + desc = event->desc; + found = true; + break; + } + } + } + + if (!found) { + enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio); + const char *label = "ACPI:OpRegion"; + int err; + + desc = gpiochip_request_own_desc(chip, pin, label); + if (IS_ERR(desc)) { + status = AE_ERROR; + mutex_unlock(&achip->conn_lock); + goto out; + } + + err = gpiod_configure_flags(desc, label, 0, flags); + if (err < 0) { + status = AE_NOT_CONFIGURED; + gpiochip_free_own_desc(desc); + mutex_unlock(&achip->conn_lock); + goto out; + } + + conn = kzalloc(sizeof(*conn), GFP_KERNEL); + if (!conn) { + status = AE_NO_MEMORY; + gpiochip_free_own_desc(desc); + mutex_unlock(&achip->conn_lock); + goto out; + } + + conn->pin = pin; + conn->desc = desc; + list_add_tail(&conn->node, &achip->conns); + } + + mutex_unlock(&achip->conn_lock); + + if (function == ACPI_WRITE) + gpiod_set_raw_value_cansleep(desc, + !!((1 << i) & *value)); + else + *value |= (u64)gpiod_get_raw_value_cansleep(desc) << i; + } + +out: + ACPI_FREE(ares); + return status; +} + +static void acpi_gpiochip_request_regions(struct acpi_gpio_chip *achip) +{ + struct gpio_chip *chip = achip->chip; + acpi_handle handle = ACPI_HANDLE(chip->parent); + acpi_status status; + + INIT_LIST_HEAD(&achip->conns); + mutex_init(&achip->conn_lock); + status = acpi_install_address_space_handler(handle, ACPI_ADR_SPACE_GPIO, + acpi_gpio_adr_space_handler, + NULL, achip); + if (ACPI_FAILURE(status)) + dev_err(chip->parent, + "Failed to install GPIO OpRegion handler\n"); +} + +static void acpi_gpiochip_free_regions(struct acpi_gpio_chip *achip) +{ + struct gpio_chip *chip = achip->chip; + acpi_handle handle = ACPI_HANDLE(chip->parent); + struct acpi_gpio_connection *conn, *tmp; + acpi_status status; + + status = acpi_remove_address_space_handler(handle, ACPI_ADR_SPACE_GPIO, + acpi_gpio_adr_space_handler); + if (ACPI_FAILURE(status)) { + dev_err(chip->parent, + "Failed to remove GPIO OpRegion handler\n"); + return; + } + + list_for_each_entry_safe_reverse(conn, tmp, &achip->conns, node) { + gpiochip_free_own_desc(conn->desc); + list_del(&conn->node); + kfree(conn); + } +} + +static struct gpio_desc *acpi_gpiochip_parse_own_gpio( + struct acpi_gpio_chip *achip, struct fwnode_handle *fwnode, + const char **name, unsigned int *lflags, unsigned int *dflags) +{ + struct gpio_chip *chip = achip->chip; + struct gpio_desc *desc; + u32 gpios[2]; + int ret; + + *lflags = 0; + *dflags = 0; + *name = NULL; + + ret = fwnode_property_read_u32_array(fwnode, "gpios", gpios, + ARRAY_SIZE(gpios)); + if (ret < 0) + return ERR_PTR(ret); + + desc = gpiochip_get_desc(chip, gpios[0]); + if (IS_ERR(desc)) + return desc; + + if (gpios[1]) + *lflags |= GPIO_ACTIVE_LOW; + + if (fwnode_property_present(fwnode, "input")) + *dflags |= GPIOD_IN; + else if (fwnode_property_present(fwnode, "output-low")) + *dflags |= GPIOD_OUT_LOW; + else if (fwnode_property_present(fwnode, "output-high")) + *dflags |= GPIOD_OUT_HIGH; + else + return ERR_PTR(-EINVAL); + + fwnode_property_read_string(fwnode, "line-name", name); + + return desc; +} + +static void acpi_gpiochip_scan_gpios(struct acpi_gpio_chip *achip) +{ + struct gpio_chip *chip = achip->chip; + struct fwnode_handle *fwnode; + + device_for_each_child_node(chip->parent, fwnode) { + unsigned int lflags, dflags; + struct gpio_desc *desc; + const char *name; + int ret; + + if (!fwnode_property_present(fwnode, "gpio-hog")) + continue; + + desc = acpi_gpiochip_parse_own_gpio(achip, fwnode, &name, + &lflags, &dflags); + if (IS_ERR(desc)) + continue; + + ret = gpiod_hog(desc, name, lflags, dflags); + if (ret) { + dev_err(chip->parent, "Failed to hog GPIO\n"); + fwnode_handle_put(fwnode); + return; + } + } +} + +void acpi_gpiochip_add(struct gpio_chip *chip) +{ + struct acpi_gpio_chip *acpi_gpio; + acpi_handle handle; + acpi_status status; + + if (!chip || !chip->parent) + return; + + handle = ACPI_HANDLE(chip->parent); + if (!handle) + return; + + acpi_gpio = kzalloc(sizeof(*acpi_gpio), GFP_KERNEL); + if (!acpi_gpio) { + dev_err(chip->parent, + "Failed to allocate memory for ACPI GPIO chip\n"); + return; + } + + acpi_gpio->chip = chip; + INIT_LIST_HEAD(&acpi_gpio->events); + INIT_LIST_HEAD(&acpi_gpio->deferred_req_irqs_list_entry); + + status = acpi_attach_data(handle, acpi_gpio_chip_dh, acpi_gpio); + if (ACPI_FAILURE(status)) { + dev_err(chip->parent, "Failed to attach ACPI GPIO chip\n"); + kfree(acpi_gpio); + return; + } + + if (!chip->names) + devprop_gpiochip_set_names(chip, dev_fwnode(chip->parent)); + + acpi_gpiochip_request_regions(acpi_gpio); + acpi_gpiochip_scan_gpios(acpi_gpio); + acpi_walk_dep_device_list(handle); +} + +void acpi_gpiochip_remove(struct gpio_chip *chip) +{ + struct acpi_gpio_chip *acpi_gpio; + acpi_handle handle; + acpi_status status; + + if (!chip || !chip->parent) + return; + + handle = ACPI_HANDLE(chip->parent); + if (!handle) + return; + + status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio); + if (ACPI_FAILURE(status)) { + dev_warn(chip->parent, "Failed to retrieve ACPI GPIO chip\n"); + return; + } + + acpi_gpiochip_free_regions(acpi_gpio); + + acpi_detach_data(handle, acpi_gpio_chip_dh); + kfree(acpi_gpio); +} + +static int acpi_gpio_package_count(const union acpi_object *obj) +{ + const union acpi_object *element = obj->package.elements; + const union acpi_object *end = element + obj->package.count; + unsigned int count = 0; + + while (element < end) { + switch (element->type) { + case ACPI_TYPE_LOCAL_REFERENCE: + element += 3; + /* Fallthrough */ + case ACPI_TYPE_INTEGER: + element++; + count++; + break; + + default: + return -EPROTO; + } + } + + return count; +} + +static int acpi_find_gpio_count(struct acpi_resource *ares, void *data) +{ + unsigned int *count = data; + + if (ares->type == ACPI_RESOURCE_TYPE_GPIO) + *count += ares->data.gpio.pin_table_length; + + return 1; +} + +/** + * acpi_gpio_count - return the number of GPIOs associated with a + * device / function or -ENOENT if no GPIO has been + * assigned to the requested function. + * @dev: GPIO consumer, can be NULL for system-global GPIOs + * @con_id: function within the GPIO consumer + */ +int acpi_gpio_count(struct device *dev, const char *con_id) +{ + struct acpi_device *adev = ACPI_COMPANION(dev); + const union acpi_object *obj; + const struct acpi_gpio_mapping *gm; + int count = -ENOENT; + int ret; + char propname[32]; + unsigned int i; + + /* Try first from _DSD */ + for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) { + if (con_id) + snprintf(propname, sizeof(propname), "%s-%s", + con_id, gpio_suffixes[i]); + else + snprintf(propname, sizeof(propname), "%s", + gpio_suffixes[i]); + + ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_ANY, + &obj); + if (ret == 0) { + if (obj->type == ACPI_TYPE_LOCAL_REFERENCE) + count = 1; + else if (obj->type == ACPI_TYPE_PACKAGE) + count = acpi_gpio_package_count(obj); + } else if (adev->driver_gpios) { + for (gm = adev->driver_gpios; gm->name; gm++) + if (strcmp(propname, gm->name) == 0) { + count = gm->size; + break; + } + } + if (count > 0) + break; + } + + /* Then from plain _CRS GPIOs */ + if (count < 0) { + struct list_head resource_list; + unsigned int crs_count = 0; + + if (!acpi_can_fallback_to_crs(adev, con_id)) + return count; + + INIT_LIST_HEAD(&resource_list); + acpi_dev_get_resources(adev, &resource_list, + acpi_find_gpio_count, &crs_count); + acpi_dev_free_resource_list(&resource_list); + if (crs_count > 0) + count = crs_count; + } + return count ? count : -ENOENT; +} + +bool acpi_can_fallback_to_crs(struct acpi_device *adev, const char *con_id) +{ + /* Never allow fallback if the device has properties */ + if (adev->data.properties || adev->driver_gpios) + return false; + + return con_id == NULL; +} + +/* Run deferred acpi_gpiochip_request_irqs() */ +static int acpi_gpio_handle_deferred_request_irqs(void) +{ + struct acpi_gpio_chip *acpi_gpio, *tmp; + + mutex_lock(&acpi_gpio_deferred_req_irqs_lock); + list_for_each_entry_safe(acpi_gpio, tmp, + &acpi_gpio_deferred_req_irqs_list, + deferred_req_irqs_list_entry) + acpi_gpiochip_request_irqs(acpi_gpio); + + acpi_gpio_deferred_req_irqs_done = true; + mutex_unlock(&acpi_gpio_deferred_req_irqs_lock); + + return 0; +} +/* We must use _sync so that this runs after the first deferred_probe run */ +late_initcall_sync(acpi_gpio_handle_deferred_request_irqs); + +static const struct dmi_system_id gpiolib_acpi_quirks[] = { + { + /* + * The Minix Neo Z83-4 has a micro-USB-B id-pin handler for + * a non existing micro-USB-B connector which puts the HDMI + * DDC pins in GPIO mode, breaking HDMI support. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MINIX"), + DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"), + }, + .driver_data = &(struct acpi_gpiolib_dmi_quirk) { + .no_edge_events_on_boot = true, + }, + }, + { + /* + * The Terra Pad 1061 has a micro-USB-B id-pin handler, which + * instead of controlling the actual micro-USB-B turns the 5V + * boost for its USB-A connector off. The actual micro-USB-B + * connector is wired for charging only. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Wortmann_AG"), + DMI_MATCH(DMI_PRODUCT_NAME, "TERRA_PAD_1061"), + }, + .driver_data = &(struct acpi_gpiolib_dmi_quirk) { + .no_edge_events_on_boot = true, + }, + }, + { + /* + * The Dell Venue 10 Pro 5055, with Bay Trail SoC + TI PMIC uses an + * external embedded-controller connected via I2C + an ACPI GPIO + * event handler on INT33FFC:02 pin 12, causing spurious wakeups. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Venue 10 Pro 5055"), + }, + .driver_data = &(struct acpi_gpiolib_dmi_quirk) { + .ignore_wake = "INT33FC:02@12", + }, + }, + { + /* + * HP X2 10 models with Cherry Trail SoC + TI PMIC use an + * external embedded-controller connected via I2C + an ACPI GPIO + * event handler on INT33FF:01 pin 0, causing spurious wakeups. + * When suspending by closing the LID, the power to the USB + * keyboard is turned off, causing INT0002 ACPI events to + * trigger once the XHCI controller notices the keyboard is + * gone. So INT0002 events cause spurious wakeups too. Ignoring + * EC wakes breaks wakeup when opening the lid, the user needs + * to press the power-button to wakeup the system. The + * alternative is suspend simply not working, which is worse. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP x2 Detachable 10-p0XX"), + }, + .driver_data = &(struct acpi_gpiolib_dmi_quirk) { + .ignore_wake = "INT33FF:01@0,INT0002:00@2", + }, + }, + { + /* + * HP X2 10 models with Bay Trail SoC + AXP288 PMIC use an + * external embedded-controller connected via I2C + an ACPI GPIO + * event handler on INT33FC:02 pin 28, causing spurious wakeups. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"), + DMI_MATCH(DMI_BOARD_NAME, "815D"), + }, + .driver_data = &(struct acpi_gpiolib_dmi_quirk) { + .ignore_wake = "INT33FC:02@28", + }, + }, + { + /* + * HP X2 10 models with Cherry Trail SoC + AXP288 PMIC use an + * external embedded-controller connected via I2C + an ACPI GPIO + * event handler on INT33FF:01 pin 0, causing spurious wakeups. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"), + DMI_MATCH(DMI_BOARD_NAME, "813E"), + }, + .driver_data = &(struct acpi_gpiolib_dmi_quirk) { + .ignore_wake = "INT33FF:01@0", + }, + }, + {} /* Terminating entry */ +}; + +static int acpi_gpio_setup_params(void) +{ + const struct acpi_gpiolib_dmi_quirk *quirk = NULL; + const struct dmi_system_id *id; + + id = dmi_first_match(gpiolib_acpi_quirks); + if (id) + quirk = id->driver_data; + + if (run_edge_events_on_boot < 0) { + if (quirk && quirk->no_edge_events_on_boot) + run_edge_events_on_boot = 0; + else + run_edge_events_on_boot = 1; + } + + if (ignore_wake == NULL && quirk && quirk->ignore_wake) + ignore_wake = quirk->ignore_wake; + + return 0; +} + +/* Directly after dmi_setup() which runs as core_initcall() */ +postcore_initcall(acpi_gpio_setup_params); diff --git a/drivers/gpio/gpiolib-devprop.c b/drivers/gpio/gpiolib-devprop.c new file mode 100644 index 000000000..f748aa3e7 --- /dev/null +++ b/drivers/gpio/gpiolib-devprop.c @@ -0,0 +1,64 @@ +/* + * Device property helpers for GPIO chips. + * + * Copyright (C) 2016, Intel Corporation + * Author: Mika Westerberg <mika.westerberg@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/property.h> +#include <linux/slab.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> + +#include "gpiolib.h" + +/** + * devprop_gpiochip_set_names - Set GPIO line names using device properties + * @chip: GPIO chip whose lines should be named, if possible + * @fwnode: Property Node containing the gpio-line-names property + * + * Looks for device property "gpio-line-names" and if it exists assigns + * GPIO line names for the chip. The memory allocated for the assigned + * names belong to the underlying firmware node and should not be released + * by the caller. + */ +void devprop_gpiochip_set_names(struct gpio_chip *chip, + const struct fwnode_handle *fwnode) +{ + struct gpio_device *gdev = chip->gpiodev; + const char **names; + int ret, i; + + ret = fwnode_property_read_string_array(fwnode, "gpio-line-names", + NULL, 0); + if (ret < 0) + return; + + if (ret != gdev->ngpio) { + dev_warn(&gdev->dev, + "names %d do not match number of GPIOs %d\n", ret, + gdev->ngpio); + return; + } + + names = kcalloc(gdev->ngpio, sizeof(*names), GFP_KERNEL); + if (!names) + return; + + ret = fwnode_property_read_string_array(fwnode, "gpio-line-names", + names, gdev->ngpio); + if (ret < 0) { + dev_warn(&gdev->dev, "failed to read GPIO line names\n"); + kfree(names); + return; + } + + for (i = 0; i < gdev->ngpio; i++) + gdev->descs[i].name = names[i]; + + kfree(names); +} diff --git a/drivers/gpio/gpiolib-legacy.c b/drivers/gpio/gpiolib-legacy.c new file mode 100644 index 000000000..8b830996f --- /dev/null +++ b/drivers/gpio/gpiolib-legacy.c @@ -0,0 +1,112 @@ +#include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> + +#include <linux/gpio.h> + +#include "gpiolib.h" + +void gpio_free(unsigned gpio) +{ + gpiod_free(gpio_to_desc(gpio)); +} +EXPORT_SYMBOL_GPL(gpio_free); + +/** + * gpio_request_one - request a single GPIO with initial configuration + * @gpio: the GPIO number + * @flags: GPIO configuration as specified by GPIOF_* + * @label: a literal description string of this GPIO + */ +int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) +{ + struct gpio_desc *desc; + int err; + + desc = gpio_to_desc(gpio); + + /* Compatibility: assume unavailable "valid" GPIOs will appear later */ + if (!desc && gpio_is_valid(gpio)) + return -EPROBE_DEFER; + + err = gpiod_request(desc, label); + if (err) + return err; + + if (flags & GPIOF_OPEN_DRAIN) + set_bit(FLAG_OPEN_DRAIN, &desc->flags); + + if (flags & GPIOF_OPEN_SOURCE) + set_bit(FLAG_OPEN_SOURCE, &desc->flags); + + if (flags & GPIOF_ACTIVE_LOW) + set_bit(FLAG_ACTIVE_LOW, &desc->flags); + + if (flags & GPIOF_DIR_IN) + err = gpiod_direction_input(desc); + else + err = gpiod_direction_output_raw(desc, + (flags & GPIOF_INIT_HIGH) ? 1 : 0); + + if (err) + goto free_gpio; + + if (flags & GPIOF_EXPORT) { + err = gpiod_export(desc, flags & GPIOF_EXPORT_CHANGEABLE); + if (err) + goto free_gpio; + } + + return 0; + + free_gpio: + gpiod_free(desc); + return err; +} +EXPORT_SYMBOL_GPL(gpio_request_one); + +int gpio_request(unsigned gpio, const char *label) +{ + struct gpio_desc *desc = gpio_to_desc(gpio); + + /* Compatibility: assume unavailable "valid" GPIOs will appear later */ + if (!desc && gpio_is_valid(gpio)) + return -EPROBE_DEFER; + + return gpiod_request(desc, label); +} +EXPORT_SYMBOL_GPL(gpio_request); + +/** + * gpio_request_array - request multiple GPIOs in a single call + * @array: array of the 'struct gpio' + * @num: how many GPIOs in the array + */ +int gpio_request_array(const struct gpio *array, size_t num) +{ + int i, err; + + for (i = 0; i < num; i++, array++) { + err = gpio_request_one(array->gpio, array->flags, array->label); + if (err) + goto err_free; + } + return 0; + +err_free: + while (i--) + gpio_free((--array)->gpio); + return err; +} +EXPORT_SYMBOL_GPL(gpio_request_array); + +/** + * gpio_free_array - release multiple GPIOs in a single call + * @array: array of the 'struct gpio' + * @num: how many GPIOs in the array + */ +void gpio_free_array(const struct gpio *array, size_t num) +{ + while (num--) + gpio_free((array++)->gpio); +} +EXPORT_SYMBOL_GPL(gpio_free_array); diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c new file mode 100644 index 000000000..09999e3e3 --- /dev/null +++ b/drivers/gpio/gpiolib-of.c @@ -0,0 +1,662 @@ +/* + * OF helpers for the GPIO API + * + * Copyright (c) 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/gpio/consumer.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_gpio.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/slab.h> +#include <linux/gpio/machine.h> + +#include "gpiolib.h" + +static int of_gpiochip_match_node_and_xlate(struct gpio_chip *chip, void *data) +{ + struct of_phandle_args *gpiospec = data; + + return chip->gpiodev->dev.of_node == gpiospec->np && + chip->of_xlate && + chip->of_xlate(chip, gpiospec, NULL) >= 0; +} + +static struct gpio_chip *of_find_gpiochip_by_xlate( + struct of_phandle_args *gpiospec) +{ + return gpiochip_find(gpiospec, of_gpiochip_match_node_and_xlate); +} + +static struct gpio_desc *of_xlate_and_get_gpiod_flags(struct gpio_chip *chip, + struct of_phandle_args *gpiospec, + enum of_gpio_flags *flags) +{ + int ret; + + if (chip->of_gpio_n_cells != gpiospec->args_count) + return ERR_PTR(-EINVAL); + + ret = chip->of_xlate(chip, gpiospec, flags); + if (ret < 0) + return ERR_PTR(ret); + + return gpiochip_get_desc(chip, ret); +} + +static void of_gpio_flags_quirks(struct device_node *np, + enum of_gpio_flags *flags) +{ + /* + * Some GPIO fixed regulator quirks. + * Note that active low is the default. + */ + if (IS_ENABLED(CONFIG_REGULATOR) && + (of_device_is_compatible(np, "regulator-fixed") || + of_device_is_compatible(np, "reg-fixed-voltage") || + of_device_is_compatible(np, "regulator-gpio"))) { + /* + * The regulator GPIO handles are specified such that the + * presence or absence of "enable-active-high" solely controls + * the polarity of the GPIO line. Any phandle flags must + * be actively ignored. + */ + if (*flags & OF_GPIO_ACTIVE_LOW) { + pr_warn("%s GPIO handle specifies active low - ignored\n", + of_node_full_name(np)); + *flags &= ~OF_GPIO_ACTIVE_LOW; + } + if (!of_property_read_bool(np, "enable-active-high")) + *flags |= OF_GPIO_ACTIVE_LOW; + } + /* + * Legacy open drain handling for fixed voltage regulators. + */ + if (IS_ENABLED(CONFIG_REGULATOR) && + of_device_is_compatible(np, "reg-fixed-voltage") && + of_property_read_bool(np, "gpio-open-drain")) { + *flags |= (OF_GPIO_SINGLE_ENDED | OF_GPIO_OPEN_DRAIN); + pr_info("%s uses legacy open drain flag - update the DTS if you can\n", + of_node_full_name(np)); + } +} + +/** + * of_get_named_gpiod_flags() - Get a GPIO descriptor and flags for GPIO API + * @np: device node to get GPIO from + * @propname: property name containing gpio specifier(s) + * @index: index of the GPIO + * @flags: a flags pointer to fill in + * + * Returns GPIO descriptor to use with Linux GPIO API, or one of the errno + * value on the error condition. If @flags is not NULL the function also fills + * in flags for the GPIO. + */ +struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np, + const char *propname, int index, enum of_gpio_flags *flags) +{ + struct of_phandle_args gpiospec; + struct gpio_chip *chip; + struct gpio_desc *desc; + int ret; + + ret = of_parse_phandle_with_args_map(np, propname, "gpio", index, + &gpiospec); + if (ret) { + pr_debug("%s: can't parse '%s' property of node '%pOF[%d]'\n", + __func__, propname, np, index); + return ERR_PTR(ret); + } + + chip = of_find_gpiochip_by_xlate(&gpiospec); + if (!chip) { + desc = ERR_PTR(-EPROBE_DEFER); + goto out; + } + + desc = of_xlate_and_get_gpiod_flags(chip, &gpiospec, flags); + if (IS_ERR(desc)) + goto out; + + if (flags) + of_gpio_flags_quirks(np, flags); + + pr_debug("%s: parsed '%s' property of node '%pOF[%d]' - status (%d)\n", + __func__, propname, np, index, + PTR_ERR_OR_ZERO(desc)); + +out: + of_node_put(gpiospec.np); + + return desc; +} + +int of_get_named_gpio_flags(struct device_node *np, const char *list_name, + int index, enum of_gpio_flags *flags) +{ + struct gpio_desc *desc; + + desc = of_get_named_gpiod_flags(np, list_name, index, flags); + + if (IS_ERR(desc)) + return PTR_ERR(desc); + else + return desc_to_gpio(desc); +} +EXPORT_SYMBOL(of_get_named_gpio_flags); + +/* + * The SPI GPIO bindings happened before we managed to establish that GPIO + * properties should be named "foo-gpios" so we have this special kludge for + * them. + */ +static struct gpio_desc *of_find_spi_gpio(struct device *dev, const char *con_id, + enum of_gpio_flags *of_flags) +{ + char prop_name[32]; /* 32 is max size of property name */ + struct device_node *np = dev->of_node; + struct gpio_desc *desc; + + /* + * Hopefully the compiler stubs the rest of the function if this + * is false. + */ + if (!IS_ENABLED(CONFIG_SPI_MASTER)) + return ERR_PTR(-ENOENT); + + /* Allow this specifically for "spi-gpio" devices */ + if (!of_device_is_compatible(np, "spi-gpio") || !con_id) + return ERR_PTR(-ENOENT); + + /* Will be "gpio-sck", "gpio-mosi" or "gpio-miso" */ + snprintf(prop_name, sizeof(prop_name), "%s-%s", "gpio", con_id); + + desc = of_get_named_gpiod_flags(np, prop_name, 0, of_flags); + return desc; +} + +/* + * Some regulator bindings happened before we managed to establish that GPIO + * properties should be named "foo-gpios" so we have this special kludge for + * them. + */ +static struct gpio_desc *of_find_regulator_gpio(struct device *dev, const char *con_id, + enum of_gpio_flags *of_flags) +{ + /* These are the connection IDs we accept as legacy GPIO phandles */ + const char *whitelist[] = { + "wlf,ldoena", /* Arizona */ + "wlf,ldo1ena", /* WM8994 */ + "wlf,ldo2ena", /* WM8994 */ + }; + struct device_node *np = dev->of_node; + struct gpio_desc *desc; + int i; + + if (!IS_ENABLED(CONFIG_REGULATOR)) + return ERR_PTR(-ENOENT); + + if (!con_id) + return ERR_PTR(-ENOENT); + + i = match_string(whitelist, ARRAY_SIZE(whitelist), con_id); + if (i < 0) + return ERR_PTR(-ENOENT); + + desc = of_get_named_gpiod_flags(np, con_id, 0, of_flags); + return desc; +} + +struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, + unsigned int idx, + enum gpio_lookup_flags *flags) +{ + char prop_name[32]; /* 32 is max size of property name */ + enum of_gpio_flags of_flags; + struct gpio_desc *desc; + unsigned int i; + + /* Try GPIO property "foo-gpios" and "foo-gpio" */ + for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) { + if (con_id) + snprintf(prop_name, sizeof(prop_name), "%s-%s", con_id, + gpio_suffixes[i]); + else + snprintf(prop_name, sizeof(prop_name), "%s", + gpio_suffixes[i]); + + desc = of_get_named_gpiod_flags(dev->of_node, prop_name, idx, + &of_flags); + /* + * -EPROBE_DEFER in our case means that we found a + * valid GPIO property, but no controller has been + * registered so far. + * + * This means we don't need to look any further for + * alternate name conventions, and we should really + * preserve the return code for our user to be able to + * retry probing later. + */ + if (IS_ERR(desc) && PTR_ERR(desc) == -EPROBE_DEFER) + return desc; + + if (!IS_ERR(desc) || (PTR_ERR(desc) != -ENOENT)) + break; + } + + /* Special handling for SPI GPIOs if used */ + if (IS_ERR(desc)) + desc = of_find_spi_gpio(dev, con_id, &of_flags); + + /* Special handling for regulator GPIOs if used */ + if (IS_ERR(desc) && PTR_ERR(desc) != -EPROBE_DEFER) + desc = of_find_regulator_gpio(dev, con_id, &of_flags); + + if (IS_ERR(desc)) + return desc; + + if (of_flags & OF_GPIO_ACTIVE_LOW) + *flags |= GPIO_ACTIVE_LOW; + + if (of_flags & OF_GPIO_SINGLE_ENDED) { + if (of_flags & OF_GPIO_OPEN_DRAIN) + *flags |= GPIO_OPEN_DRAIN; + else + *flags |= GPIO_OPEN_SOURCE; + } + + if (of_flags & OF_GPIO_TRANSITORY) + *flags |= GPIO_TRANSITORY; + + return desc; +} + +/** + * of_parse_own_gpio() - Get a GPIO hog descriptor, names and flags for GPIO API + * @np: device node to get GPIO from + * @chip: GPIO chip whose hog is parsed + * @idx: Index of the GPIO to parse + * @name: GPIO line name + * @lflags: gpio_lookup_flags - returned from of_find_gpio() or + * of_parse_own_gpio() + * @dflags: gpiod_flags - optional GPIO initialization flags + * + * Returns GPIO descriptor to use with Linux GPIO API, or one of the errno + * value on the error condition. + */ +static struct gpio_desc *of_parse_own_gpio(struct device_node *np, + struct gpio_chip *chip, + unsigned int idx, const char **name, + enum gpio_lookup_flags *lflags, + enum gpiod_flags *dflags) +{ + struct device_node *chip_np; + enum of_gpio_flags xlate_flags; + struct of_phandle_args gpiospec; + struct gpio_desc *desc; + unsigned int i; + u32 tmp; + int ret; + + chip_np = chip->of_node; + if (!chip_np) + return ERR_PTR(-EINVAL); + + xlate_flags = 0; + *lflags = 0; + *dflags = 0; + + ret = of_property_read_u32(chip_np, "#gpio-cells", &tmp); + if (ret) + return ERR_PTR(ret); + + gpiospec.np = chip_np; + gpiospec.args_count = tmp; + + for (i = 0; i < tmp; i++) { + ret = of_property_read_u32_index(np, "gpios", idx * tmp + i, + &gpiospec.args[i]); + if (ret) + return ERR_PTR(ret); + } + + desc = of_xlate_and_get_gpiod_flags(chip, &gpiospec, &xlate_flags); + if (IS_ERR(desc)) + return desc; + + if (xlate_flags & OF_GPIO_ACTIVE_LOW) + *lflags |= GPIO_ACTIVE_LOW; + if (xlate_flags & OF_GPIO_TRANSITORY) + *lflags |= GPIO_TRANSITORY; + + if (of_property_read_bool(np, "input")) + *dflags |= GPIOD_IN; + else if (of_property_read_bool(np, "output-low")) + *dflags |= GPIOD_OUT_LOW; + else if (of_property_read_bool(np, "output-high")) + *dflags |= GPIOD_OUT_HIGH; + else { + pr_warn("GPIO line %d (%s): no hogging state specified, bailing out\n", + desc_to_gpio(desc), np->name); + return ERR_PTR(-EINVAL); + } + + if (name && of_property_read_string(np, "line-name", name)) + *name = np->name; + + return desc; +} + +/** + * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions + * @chip: gpio chip to act on + * + * This is only used by of_gpiochip_add to request/set GPIO initial + * configuration. + * It returns error if it fails otherwise 0 on success. + */ +static int of_gpiochip_scan_gpios(struct gpio_chip *chip) +{ + struct gpio_desc *desc = NULL; + struct device_node *np; + const char *name; + enum gpio_lookup_flags lflags; + enum gpiod_flags dflags; + unsigned int i; + int ret; + + for_each_available_child_of_node(chip->of_node, np) { + if (!of_property_read_bool(np, "gpio-hog")) + continue; + + for (i = 0;; i++) { + desc = of_parse_own_gpio(np, chip, i, &name, &lflags, + &dflags); + if (IS_ERR(desc)) + break; + + ret = gpiod_hog(desc, name, lflags, dflags); + if (ret < 0) { + of_node_put(np); + return ret; + } + } + } + + return 0; +} + +/** + * of_gpio_simple_xlate - translate gpiospec to the GPIO number and flags + * @gc: pointer to the gpio_chip structure + * @gpiospec: GPIO specifier as found in the device tree + * @flags: a flags pointer to fill in + * + * This is simple translation function, suitable for the most 1:1 mapped + * GPIO chips. This function performs only one sanity check: whether GPIO + * is less than ngpios (that is specified in the gpio_chip). + */ +int of_gpio_simple_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, u32 *flags) +{ + /* + * We're discouraging gpio_cells < 2, since that way you'll have to + * write your own xlate function (that will have to retrieve the GPIO + * number and the flags from a single gpio cell -- this is possible, + * but not recommended). + */ + if (gc->of_gpio_n_cells < 2) { + WARN_ON(1); + return -EINVAL; + } + + if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells)) + return -EINVAL; + + if (gpiospec->args[0] >= gc->ngpio) + return -EINVAL; + + if (flags) + *flags = gpiospec->args[1]; + + return gpiospec->args[0]; +} +EXPORT_SYMBOL(of_gpio_simple_xlate); + +/** + * of_mm_gpiochip_add_data - Add memory mapped GPIO chip (bank) + * @np: device node of the GPIO chip + * @mm_gc: pointer to the of_mm_gpio_chip allocated structure + * @data: driver data to store in the struct gpio_chip + * + * To use this function you should allocate and fill mm_gc with: + * + * 1) In the gpio_chip structure: + * - all the callbacks + * - of_gpio_n_cells + * - of_xlate callback (optional) + * + * 3) In the of_mm_gpio_chip structure: + * - save_regs callback (optional) + * + * If succeeded, this function will map bank's memory and will + * do all necessary work for you. Then you'll able to use .regs + * to manage GPIOs from the callbacks. + */ +int of_mm_gpiochip_add_data(struct device_node *np, + struct of_mm_gpio_chip *mm_gc, + void *data) +{ + int ret = -ENOMEM; + struct gpio_chip *gc = &mm_gc->gc; + + gc->label = kasprintf(GFP_KERNEL, "%pOF", np); + if (!gc->label) + goto err0; + + mm_gc->regs = of_iomap(np, 0); + if (!mm_gc->regs) + goto err1; + + gc->base = -1; + + if (mm_gc->save_regs) + mm_gc->save_regs(mm_gc); + + mm_gc->gc.of_node = np; + + ret = gpiochip_add_data(gc, data); + if (ret) + goto err2; + + return 0; +err2: + iounmap(mm_gc->regs); +err1: + kfree(gc->label); +err0: + pr_err("%pOF: GPIO chip registration failed with status %d\n", np, ret); + return ret; +} +EXPORT_SYMBOL(of_mm_gpiochip_add_data); + +/** + * of_mm_gpiochip_remove - Remove memory mapped GPIO chip (bank) + * @mm_gc: pointer to the of_mm_gpio_chip allocated structure + */ +void of_mm_gpiochip_remove(struct of_mm_gpio_chip *mm_gc) +{ + struct gpio_chip *gc = &mm_gc->gc; + + if (!mm_gc) + return; + + gpiochip_remove(gc); + iounmap(mm_gc->regs); + kfree(gc->label); +} +EXPORT_SYMBOL(of_mm_gpiochip_remove); + +static void of_gpiochip_init_valid_mask(struct gpio_chip *chip) +{ + int len, i; + u32 start, count; + struct device_node *np = chip->of_node; + + len = of_property_count_u32_elems(np, "gpio-reserved-ranges"); + if (len < 0 || len % 2 != 0) + return; + + for (i = 0; i < len; i += 2) { + of_property_read_u32_index(np, "gpio-reserved-ranges", + i, &start); + of_property_read_u32_index(np, "gpio-reserved-ranges", + i + 1, &count); + if (start >= chip->ngpio || start + count > chip->ngpio) + continue; + + bitmap_clear(chip->valid_mask, start, count); + } +}; + +#ifdef CONFIG_PINCTRL +static int of_gpiochip_add_pin_range(struct gpio_chip *chip) +{ + struct device_node *np = chip->of_node; + struct of_phandle_args pinspec; + struct pinctrl_dev *pctldev; + int index = 0, ret; + const char *name; + static const char group_names_propname[] = "gpio-ranges-group-names"; + struct property *group_names; + + if (!np) + return 0; + + group_names = of_find_property(np, group_names_propname, NULL); + + for (;; index++) { + ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, + index, &pinspec); + if (ret) + break; + + pctldev = of_pinctrl_get(pinspec.np); + of_node_put(pinspec.np); + if (!pctldev) + return -EPROBE_DEFER; + + if (pinspec.args[2]) { + if (group_names) { + of_property_read_string_index(np, + group_names_propname, + index, &name); + if (strlen(name)) { + pr_err("%pOF: Group name of numeric GPIO ranges must be the empty string.\n", + np); + break; + } + } + /* npins != 0: linear range */ + ret = gpiochip_add_pin_range(chip, + pinctrl_dev_get_devname(pctldev), + pinspec.args[0], + pinspec.args[1], + pinspec.args[2]); + if (ret) + return ret; + } else { + /* npins == 0: special range */ + if (pinspec.args[1]) { + pr_err("%pOF: Illegal gpio-range format.\n", + np); + break; + } + + if (!group_names) { + pr_err("%pOF: GPIO group range requested but no %s property.\n", + np, group_names_propname); + break; + } + + ret = of_property_read_string_index(np, + group_names_propname, + index, &name); + if (ret) + break; + + if (!strlen(name)) { + pr_err("%pOF: Group name of GPIO group range cannot be the empty string.\n", + np); + break; + } + + ret = gpiochip_add_pingroup_range(chip, pctldev, + pinspec.args[0], name); + if (ret) + return ret; + } + } + + return 0; +} + +#else +static int of_gpiochip_add_pin_range(struct gpio_chip *chip) { return 0; } +#endif + +int of_gpiochip_add(struct gpio_chip *chip) +{ + int status; + + if (!chip->of_node) + return 0; + + if (!chip->of_xlate) { + chip->of_gpio_n_cells = 2; + chip->of_xlate = of_gpio_simple_xlate; + } + + if (chip->of_gpio_n_cells > MAX_PHANDLE_ARGS) + return -EINVAL; + + of_gpiochip_init_valid_mask(chip); + + status = of_gpiochip_add_pin_range(chip); + if (status) + return status; + + /* If the chip defines names itself, these take precedence */ + if (!chip->names) + devprop_gpiochip_set_names(chip, + of_fwnode_handle(chip->of_node)); + + of_node_get(chip->of_node); + + status = of_gpiochip_scan_gpios(chip); + if (status) { + of_node_put(chip->of_node); + gpiochip_remove_pin_ranges(chip); + } + + return status; +} + +void of_gpiochip_remove(struct gpio_chip *chip) +{ + gpiochip_remove_pin_ranges(chip); + of_node_put(chip->of_node); +} diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c new file mode 100644 index 000000000..e0ccc79b2 --- /dev/null +++ b/drivers/gpio/gpiolib-sysfs.c @@ -0,0 +1,854 @@ +#include <linux/idr.h> +#include <linux/mutex.h> +#include <linux/device.h> +#include <linux/sysfs.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/kdev_t.h> +#include <linux/slab.h> +#include <linux/ctype.h> + +#include "gpiolib.h" + +#define GPIO_IRQF_TRIGGER_FALLING BIT(0) +#define GPIO_IRQF_TRIGGER_RISING BIT(1) +#define GPIO_IRQF_TRIGGER_BOTH (GPIO_IRQF_TRIGGER_FALLING | \ + GPIO_IRQF_TRIGGER_RISING) + +struct gpiod_data { + struct gpio_desc *desc; + + struct mutex mutex; + struct kernfs_node *value_kn; + int irq; + unsigned char irq_flags; + + bool direction_can_change; +}; + +/* + * Lock to serialise gpiod export and unexport, and prevent re-export of + * gpiod whose chip is being unregistered. + */ +static DEFINE_MUTEX(sysfs_lock); + +/* + * /sys/class/gpio/gpioN... only for GPIOs that are exported + * /direction + * * MAY BE OMITTED if kernel won't allow direction changes + * * is read/write as "in" or "out" + * * may also be written as "high" or "low", initializing + * output value as specified ("out" implies "low") + * /value + * * always readable, subject to hardware behavior + * * may be writable, as zero/nonzero + * /edge + * * configures behavior of poll(2) on /value + * * available only if pin can generate IRQs on input + * * is read/write as "none", "falling", "rising", or "both" + * /active_low + * * configures polarity of /value + * * is read/write as zero/nonzero + * * also affects existing and subsequent "falling" and "rising" + * /edge configuration + */ + +static ssize_t direction_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct gpiod_data *data = dev_get_drvdata(dev); + struct gpio_desc *desc = data->desc; + ssize_t status; + + mutex_lock(&data->mutex); + + gpiod_get_direction(desc); + status = sprintf(buf, "%s\n", + test_bit(FLAG_IS_OUT, &desc->flags) + ? "out" : "in"); + + mutex_unlock(&data->mutex); + + return status; +} + +static ssize_t direction_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct gpiod_data *data = dev_get_drvdata(dev); + struct gpio_desc *desc = data->desc; + ssize_t status; + + mutex_lock(&data->mutex); + + if (sysfs_streq(buf, "high")) + status = gpiod_direction_output_raw(desc, 1); + else if (sysfs_streq(buf, "out") || sysfs_streq(buf, "low")) + status = gpiod_direction_output_raw(desc, 0); + else if (sysfs_streq(buf, "in")) + status = gpiod_direction_input(desc); + else + status = -EINVAL; + + mutex_unlock(&data->mutex); + + return status ? : size; +} +static DEVICE_ATTR_RW(direction); + +static ssize_t value_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct gpiod_data *data = dev_get_drvdata(dev); + struct gpio_desc *desc = data->desc; + ssize_t status; + + mutex_lock(&data->mutex); + + status = gpiod_get_value_cansleep(desc); + if (status < 0) + goto err; + + buf[0] = '0' + status; + buf[1] = '\n'; + status = 2; +err: + mutex_unlock(&data->mutex); + + return status; +} + +static ssize_t value_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct gpiod_data *data = dev_get_drvdata(dev); + struct gpio_desc *desc = data->desc; + ssize_t status = 0; + + mutex_lock(&data->mutex); + + if (!test_bit(FLAG_IS_OUT, &desc->flags)) { + status = -EPERM; + } else { + long value; + + if (size <= 2 && isdigit(buf[0]) && + (size == 1 || buf[1] == '\n')) + value = buf[0] - '0'; + else + status = kstrtol(buf, 0, &value); + if (status == 0) { + gpiod_set_value_cansleep(desc, value); + status = size; + } + } + + mutex_unlock(&data->mutex); + + return status; +} +static DEVICE_ATTR_PREALLOC(value, S_IWUSR | S_IRUGO, value_show, value_store); + +static irqreturn_t gpio_sysfs_irq(int irq, void *priv) +{ + struct gpiod_data *data = priv; + + sysfs_notify_dirent(data->value_kn); + + return IRQ_HANDLED; +} + +/* Caller holds gpiod-data mutex. */ +static int gpio_sysfs_request_irq(struct device *dev, unsigned char flags) +{ + struct gpiod_data *data = dev_get_drvdata(dev); + struct gpio_desc *desc = data->desc; + unsigned long irq_flags; + int ret; + + data->irq = gpiod_to_irq(desc); + if (data->irq < 0) + return -EIO; + + data->value_kn = sysfs_get_dirent(dev->kobj.sd, "value"); + if (!data->value_kn) + return -ENODEV; + + irq_flags = IRQF_SHARED; + if (flags & GPIO_IRQF_TRIGGER_FALLING) + irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ? + IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING; + if (flags & GPIO_IRQF_TRIGGER_RISING) + irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ? + IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING; + + /* + * FIXME: This should be done in the irq_request_resources callback + * when the irq is requested, but a few drivers currently fail + * to do so. + * + * Remove this redundant call (along with the corresponding + * unlock) when those drivers have been fixed. + */ + ret = gpiochip_lock_as_irq(desc->gdev->chip, gpio_chip_hwgpio(desc)); + if (ret < 0) + goto err_put_kn; + + ret = request_any_context_irq(data->irq, gpio_sysfs_irq, irq_flags, + "gpiolib", data); + if (ret < 0) + goto err_unlock; + + data->irq_flags = flags; + + return 0; + +err_unlock: + gpiochip_unlock_as_irq(desc->gdev->chip, gpio_chip_hwgpio(desc)); +err_put_kn: + sysfs_put(data->value_kn); + + return ret; +} + +/* + * Caller holds gpiod-data mutex (unless called after class-device + * deregistration). + */ +static void gpio_sysfs_free_irq(struct device *dev) +{ + struct gpiod_data *data = dev_get_drvdata(dev); + struct gpio_desc *desc = data->desc; + + data->irq_flags = 0; + free_irq(data->irq, data); + gpiochip_unlock_as_irq(desc->gdev->chip, gpio_chip_hwgpio(desc)); + sysfs_put(data->value_kn); +} + +static const struct { + const char *name; + unsigned char flags; +} trigger_types[] = { + { "none", 0 }, + { "falling", GPIO_IRQF_TRIGGER_FALLING }, + { "rising", GPIO_IRQF_TRIGGER_RISING }, + { "both", GPIO_IRQF_TRIGGER_BOTH }, +}; + +static ssize_t edge_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct gpiod_data *data = dev_get_drvdata(dev); + ssize_t status = 0; + int i; + + mutex_lock(&data->mutex); + + for (i = 0; i < ARRAY_SIZE(trigger_types); i++) { + if (data->irq_flags == trigger_types[i].flags) { + status = sprintf(buf, "%s\n", trigger_types[i].name); + break; + } + } + + mutex_unlock(&data->mutex); + + return status; +} + +static ssize_t edge_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct gpiod_data *data = dev_get_drvdata(dev); + unsigned char flags; + ssize_t status = size; + int i; + + for (i = 0; i < ARRAY_SIZE(trigger_types); i++) { + if (sysfs_streq(trigger_types[i].name, buf)) + break; + } + + if (i == ARRAY_SIZE(trigger_types)) + return -EINVAL; + + flags = trigger_types[i].flags; + + mutex_lock(&data->mutex); + + if (flags == data->irq_flags) { + status = size; + goto out_unlock; + } + + if (data->irq_flags) + gpio_sysfs_free_irq(dev); + + if (flags) { + status = gpio_sysfs_request_irq(dev, flags); + if (!status) + status = size; + } + +out_unlock: + mutex_unlock(&data->mutex); + + return status; +} +static DEVICE_ATTR_RW(edge); + +/* Caller holds gpiod-data mutex. */ +static int gpio_sysfs_set_active_low(struct device *dev, int value) +{ + struct gpiod_data *data = dev_get_drvdata(dev); + struct gpio_desc *desc = data->desc; + int status = 0; + unsigned int flags = data->irq_flags; + + if (!!test_bit(FLAG_ACTIVE_LOW, &desc->flags) == !!value) + return 0; + + if (value) + set_bit(FLAG_ACTIVE_LOW, &desc->flags); + else + clear_bit(FLAG_ACTIVE_LOW, &desc->flags); + + /* reconfigure poll(2) support if enabled on one edge only */ + if (flags == GPIO_IRQF_TRIGGER_FALLING || + flags == GPIO_IRQF_TRIGGER_RISING) { + gpio_sysfs_free_irq(dev); + status = gpio_sysfs_request_irq(dev, flags); + } + + return status; +} + +static ssize_t active_low_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct gpiod_data *data = dev_get_drvdata(dev); + struct gpio_desc *desc = data->desc; + ssize_t status; + + mutex_lock(&data->mutex); + + status = sprintf(buf, "%d\n", + !!test_bit(FLAG_ACTIVE_LOW, &desc->flags)); + + mutex_unlock(&data->mutex); + + return status; +} + +static ssize_t active_low_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct gpiod_data *data = dev_get_drvdata(dev); + ssize_t status; + long value; + + mutex_lock(&data->mutex); + + status = kstrtol(buf, 0, &value); + if (status == 0) + status = gpio_sysfs_set_active_low(dev, value); + + mutex_unlock(&data->mutex); + + return status ? : size; +} +static DEVICE_ATTR_RW(active_low); + +static umode_t gpio_is_visible(struct kobject *kobj, struct attribute *attr, + int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct gpiod_data *data = dev_get_drvdata(dev); + struct gpio_desc *desc = data->desc; + umode_t mode = attr->mode; + bool show_direction = data->direction_can_change; + + if (attr == &dev_attr_direction.attr) { + if (!show_direction) + mode = 0; + } else if (attr == &dev_attr_edge.attr) { + if (gpiod_to_irq(desc) < 0) + mode = 0; + if (!show_direction && test_bit(FLAG_IS_OUT, &desc->flags)) + mode = 0; + } + + return mode; +} + +static struct attribute *gpio_attrs[] = { + &dev_attr_direction.attr, + &dev_attr_edge.attr, + &dev_attr_value.attr, + &dev_attr_active_low.attr, + NULL, +}; + +static const struct attribute_group gpio_group = { + .attrs = gpio_attrs, + .is_visible = gpio_is_visible, +}; + +static const struct attribute_group *gpio_groups[] = { + &gpio_group, + NULL +}; + +/* + * /sys/class/gpio/gpiochipN/ + * /base ... matching gpio_chip.base (N) + * /label ... matching gpio_chip.label + * /ngpio ... matching gpio_chip.ngpio + */ + +static ssize_t base_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + const struct gpio_chip *chip = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", chip->base); +} +static DEVICE_ATTR_RO(base); + +static ssize_t label_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + const struct gpio_chip *chip = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", chip->label ? : ""); +} +static DEVICE_ATTR_RO(label); + +static ssize_t ngpio_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + const struct gpio_chip *chip = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", chip->ngpio); +} +static DEVICE_ATTR_RO(ngpio); + +static struct attribute *gpiochip_attrs[] = { + &dev_attr_base.attr, + &dev_attr_label.attr, + &dev_attr_ngpio.attr, + NULL, +}; +ATTRIBUTE_GROUPS(gpiochip); + +static struct gpio_desc *gpio_to_valid_desc(int gpio) +{ + return gpio_is_valid(gpio) ? gpio_to_desc(gpio) : NULL; +} + +/* + * /sys/class/gpio/export ... write-only + * integer N ... number of GPIO to export (full access) + * /sys/class/gpio/unexport ... write-only + * integer N ... number of GPIO to unexport + */ +static ssize_t export_store(struct class *class, + struct class_attribute *attr, + const char *buf, size_t len) +{ + long gpio; + struct gpio_desc *desc; + int status; + struct gpio_chip *gc; + int offset; + + status = kstrtol(buf, 0, &gpio); + if (status < 0) + goto done; + + desc = gpio_to_valid_desc(gpio); + /* reject invalid GPIOs */ + if (!desc) { + pr_warn("%s: invalid GPIO %ld\n", __func__, gpio); + return -EINVAL; + } + gc = desc->gdev->chip; + offset = gpio_chip_hwgpio(desc); + if (!gpiochip_line_is_valid(gc, offset)) { + pr_warn("%s: GPIO %ld masked\n", __func__, gpio); + return -EINVAL; + } + + /* No extra locking here; FLAG_SYSFS just signifies that the + * request and export were done by on behalf of userspace, so + * they may be undone on its behalf too. + */ + + status = gpiod_request(desc, "sysfs"); + if (status < 0) { + if (status == -EPROBE_DEFER) + status = -ENODEV; + goto done; + } + + status = gpiod_set_transitory(desc, false); + if (!status) { + status = gpiod_export(desc, true); + if (status < 0) + gpiod_free(desc); + else + set_bit(FLAG_SYSFS, &desc->flags); + } + +done: + if (status) + pr_debug("%s: status %d\n", __func__, status); + return status ? : len; +} +static CLASS_ATTR_WO(export); + +static ssize_t unexport_store(struct class *class, + struct class_attribute *attr, + const char *buf, size_t len) +{ + long gpio; + struct gpio_desc *desc; + int status; + + status = kstrtol(buf, 0, &gpio); + if (status < 0) + goto done; + + desc = gpio_to_valid_desc(gpio); + /* reject bogus commands (gpio_unexport ignores them) */ + if (!desc) { + pr_warn("%s: invalid GPIO %ld\n", __func__, gpio); + return -EINVAL; + } + + status = -EINVAL; + + /* No extra locking here; FLAG_SYSFS just signifies that the + * request and export were done by on behalf of userspace, so + * they may be undone on its behalf too. + */ + if (test_and_clear_bit(FLAG_SYSFS, &desc->flags)) { + status = 0; + gpiod_free(desc); + } +done: + if (status) + pr_debug("%s: status %d\n", __func__, status); + return status ? : len; +} +static CLASS_ATTR_WO(unexport); + +static struct attribute *gpio_class_attrs[] = { + &class_attr_export.attr, + &class_attr_unexport.attr, + NULL, +}; +ATTRIBUTE_GROUPS(gpio_class); + +static struct class gpio_class = { + .name = "gpio", + .owner = THIS_MODULE, + + .class_groups = gpio_class_groups, +}; + + +/** + * gpiod_export - export a GPIO through sysfs + * @desc: GPIO to make available, already requested + * @direction_may_change: true if userspace may change GPIO direction + * Context: arch_initcall or later + * + * When drivers want to make a GPIO accessible to userspace after they + * have requested it -- perhaps while debugging, or as part of their + * public interface -- they may use this routine. If the GPIO can + * change direction (some can't) and the caller allows it, userspace + * will see "direction" sysfs attribute which may be used to change + * the gpio's direction. A "value" attribute will always be provided. + * + * Returns zero on success, else an error. + */ +int gpiod_export(struct gpio_desc *desc, bool direction_may_change) +{ + struct gpio_chip *chip; + struct gpio_device *gdev; + struct gpiod_data *data; + unsigned long flags; + int status; + const char *ioname = NULL; + struct device *dev; + int offset; + + /* can't export until sysfs is available ... */ + if (!gpio_class.p) { + pr_debug("%s: called too early!\n", __func__); + return -ENOENT; + } + + if (!desc) { + pr_debug("%s: invalid gpio descriptor\n", __func__); + return -EINVAL; + } + + gdev = desc->gdev; + chip = gdev->chip; + + mutex_lock(&sysfs_lock); + + /* check if chip is being removed */ + if (!chip || !gdev->mockdev) { + status = -ENODEV; + goto err_unlock; + } + + spin_lock_irqsave(&gpio_lock, flags); + if (!test_bit(FLAG_REQUESTED, &desc->flags) || + test_bit(FLAG_EXPORT, &desc->flags)) { + spin_unlock_irqrestore(&gpio_lock, flags); + gpiod_dbg(desc, "%s: unavailable (requested=%d, exported=%d)\n", + __func__, + test_bit(FLAG_REQUESTED, &desc->flags), + test_bit(FLAG_EXPORT, &desc->flags)); + status = -EPERM; + goto err_unlock; + } + spin_unlock_irqrestore(&gpio_lock, flags); + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto err_unlock; + } + + data->desc = desc; + mutex_init(&data->mutex); + if (chip->direction_input && chip->direction_output) + data->direction_can_change = direction_may_change; + else + data->direction_can_change = false; + + offset = gpio_chip_hwgpio(desc); + if (chip->names && chip->names[offset]) + ioname = chip->names[offset]; + + dev = device_create_with_groups(&gpio_class, &gdev->dev, + MKDEV(0, 0), data, gpio_groups, + ioname ? ioname : "gpio%u", + desc_to_gpio(desc)); + if (IS_ERR(dev)) { + status = PTR_ERR(dev); + goto err_free_data; + } + + set_bit(FLAG_EXPORT, &desc->flags); + mutex_unlock(&sysfs_lock); + return 0; + +err_free_data: + kfree(data); +err_unlock: + mutex_unlock(&sysfs_lock); + gpiod_dbg(desc, "%s: status %d\n", __func__, status); + return status; +} +EXPORT_SYMBOL_GPL(gpiod_export); + +static int match_export(struct device *dev, const void *desc) +{ + struct gpiod_data *data = dev_get_drvdata(dev); + + return data->desc == desc; +} + +/** + * gpiod_export_link - create a sysfs link to an exported GPIO node + * @dev: device under which to create symlink + * @name: name of the symlink + * @desc: GPIO to create symlink to, already exported + * + * Set up a symlink from /sys/.../dev/name to /sys/class/gpio/gpioN + * node. Caller is responsible for unlinking. + * + * Returns zero on success, else an error. + */ +int gpiod_export_link(struct device *dev, const char *name, + struct gpio_desc *desc) +{ + struct device *cdev; + int ret; + + if (!desc) { + pr_warn("%s: invalid GPIO\n", __func__); + return -EINVAL; + } + + cdev = class_find_device(&gpio_class, NULL, desc, match_export); + if (!cdev) + return -ENODEV; + + ret = sysfs_create_link(&dev->kobj, &cdev->kobj, name); + put_device(cdev); + + return ret; +} +EXPORT_SYMBOL_GPL(gpiod_export_link); + +/** + * gpiod_unexport - reverse effect of gpiod_export() + * @desc: GPIO to make unavailable + * + * This is implicit on gpiod_free(). + */ +void gpiod_unexport(struct gpio_desc *desc) +{ + struct gpiod_data *data; + struct device *dev; + + if (!desc) { + pr_warn("%s: invalid GPIO\n", __func__); + return; + } + + mutex_lock(&sysfs_lock); + + if (!test_bit(FLAG_EXPORT, &desc->flags)) + goto err_unlock; + + dev = class_find_device(&gpio_class, NULL, desc, match_export); + if (!dev) + goto err_unlock; + + data = dev_get_drvdata(dev); + + clear_bit(FLAG_EXPORT, &desc->flags); + + device_unregister(dev); + + /* + * Release irq after deregistration to prevent race with edge_store. + */ + if (data->irq_flags) + gpio_sysfs_free_irq(dev); + + mutex_unlock(&sysfs_lock); + + put_device(dev); + kfree(data); + + return; + +err_unlock: + mutex_unlock(&sysfs_lock); +} +EXPORT_SYMBOL_GPL(gpiod_unexport); + +int gpiochip_sysfs_register(struct gpio_device *gdev) +{ + struct device *dev; + struct device *parent; + struct gpio_chip *chip = gdev->chip; + + /* + * Many systems add gpio chips for SOC support very early, + * before driver model support is available. In those cases we + * register later, in gpiolib_sysfs_init() ... here we just + * verify that _some_ field of gpio_class got initialized. + */ + if (!gpio_class.p) + return 0; + + /* + * For sysfs backward compatibility we need to preserve this + * preferred parenting to the gpio_chip parent field, if set. + */ + if (chip->parent) + parent = chip->parent; + else + parent = &gdev->dev; + + /* use chip->base for the ID; it's already known to be unique */ + dev = device_create_with_groups(&gpio_class, parent, + MKDEV(0, 0), + chip, gpiochip_groups, + "gpiochip%d", chip->base); + if (IS_ERR(dev)) + return PTR_ERR(dev); + + mutex_lock(&sysfs_lock); + gdev->mockdev = dev; + mutex_unlock(&sysfs_lock); + + return 0; +} + +void gpiochip_sysfs_unregister(struct gpio_device *gdev) +{ + struct gpio_desc *desc; + struct gpio_chip *chip = gdev->chip; + unsigned int i; + + if (!gdev->mockdev) + return; + + device_unregister(gdev->mockdev); + + /* prevent further gpiod exports */ + mutex_lock(&sysfs_lock); + gdev->mockdev = NULL; + mutex_unlock(&sysfs_lock); + + /* unregister gpiod class devices owned by sysfs */ + for (i = 0; i < chip->ngpio; i++) { + desc = &gdev->descs[i]; + if (test_and_clear_bit(FLAG_SYSFS, &desc->flags)) + gpiod_free(desc); + } +} + +static int __init gpiolib_sysfs_init(void) +{ + int status; + unsigned long flags; + struct gpio_device *gdev; + + status = class_register(&gpio_class); + if (status < 0) + return status; + + /* Scan and register the gpio_chips which registered very + * early (e.g. before the class_register above was called). + * + * We run before arch_initcall() so chip->dev nodes can have + * registered, and so arch_initcall() can always gpio_export(). + */ + spin_lock_irqsave(&gpio_lock, flags); + list_for_each_entry(gdev, &gpio_devices, list) { + if (gdev->mockdev) + continue; + + /* + * TODO we yield gpio_lock here because + * gpiochip_sysfs_register() acquires a mutex. This is unsafe + * and needs to be fixed. + * + * Also it would be nice to use gpiochip_find() here so we + * can keep gpio_chips local to gpiolib.c, but the yield of + * gpio_lock prevents us from doing this. + */ + spin_unlock_irqrestore(&gpio_lock, flags); + status = gpiochip_sysfs_register(gdev); + spin_lock_irqsave(&gpio_lock, flags); + } + spin_unlock_irqrestore(&gpio_lock, flags); + + return status; +} +postcore_initcall(gpiolib_sysfs_init); diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c new file mode 100644 index 000000000..12472b84a --- /dev/null +++ b/drivers/gpio/gpiolib.c @@ -0,0 +1,4485 @@ +#include <linux/bitmap.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/idr.h> +#include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/machine.h> +#include <linux/pinctrl/consumer.h> +#include <linux/cdev.h> +#include <linux/fs.h> +#include <linux/uaccess.h> +#include <linux/compat.h> +#include <linux/anon_inodes.h> +#include <linux/file.h> +#include <linux/kfifo.h> +#include <linux/poll.h> +#include <linux/timekeeping.h> +#include <uapi/linux/gpio.h> + +#include "gpiolib.h" + +#define CREATE_TRACE_POINTS +#include <trace/events/gpio.h> + +/* Implementation infrastructure for GPIO interfaces. + * + * The GPIO programming interface allows for inlining speed-critical + * get/set operations for common cases, so that access to SOC-integrated + * GPIOs can sometimes cost only an instruction or two per bit. + */ + + +/* When debugging, extend minimal trust to callers and platform code. + * Also emit diagnostic messages that may help initial bringup, when + * board setup or driver bugs are most common. + * + * Otherwise, minimize overhead in what may be bitbanging codepaths. + */ +#ifdef DEBUG +#define extra_checks 1 +#else +#define extra_checks 0 +#endif + +/* Device and char device-related information */ +static DEFINE_IDA(gpio_ida); +static dev_t gpio_devt; +#define GPIO_DEV_MAX 256 /* 256 GPIO chip devices supported */ +static struct bus_type gpio_bus_type = { + .name = "gpio", +}; + +/* + * Number of GPIOs to use for the fast path in set array + */ +#define FASTPATH_NGPIO CONFIG_GPIOLIB_FASTPATH_LIMIT + +/* gpio_lock prevents conflicts during gpio_desc[] table updates. + * While any GPIO is requested, its gpio_chip is not removable; + * each GPIO's "requested" flag serves as a lock and refcount. + */ +DEFINE_SPINLOCK(gpio_lock); + +static DEFINE_MUTEX(gpio_lookup_lock); +static LIST_HEAD(gpio_lookup_list); +LIST_HEAD(gpio_devices); + +static DEFINE_MUTEX(gpio_machine_hogs_mutex); +static LIST_HEAD(gpio_machine_hogs); + +static void gpiochip_free_hogs(struct gpio_chip *chip); +static int gpiochip_add_irqchip(struct gpio_chip *gpiochip, + struct lock_class_key *lock_key, + struct lock_class_key *request_key); +static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip); +static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip); +static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip); + +static bool gpiolib_initialized; + +static inline void desc_set_label(struct gpio_desc *d, const char *label) +{ + d->label = label; +} + +/** + * gpio_to_desc - Convert a GPIO number to its descriptor + * @gpio: global GPIO number + * + * Returns: + * The GPIO descriptor associated with the given GPIO, or %NULL if no GPIO + * with the given number exists in the system. + */ +struct gpio_desc *gpio_to_desc(unsigned gpio) +{ + struct gpio_device *gdev; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + list_for_each_entry(gdev, &gpio_devices, list) { + if (gdev->base <= gpio && + gdev->base + gdev->ngpio > gpio) { + spin_unlock_irqrestore(&gpio_lock, flags); + return &gdev->descs[gpio - gdev->base]; + } + } + + spin_unlock_irqrestore(&gpio_lock, flags); + + if (!gpio_is_valid(gpio)) + WARN(1, "invalid GPIO %d\n", gpio); + + return NULL; +} +EXPORT_SYMBOL_GPL(gpio_to_desc); + +/** + * gpiochip_get_desc - get the GPIO descriptor corresponding to the given + * hardware number for this chip + * @chip: GPIO chip + * @hwnum: hardware number of the GPIO for this chip + * + * Returns: + * A pointer to the GPIO descriptor or %ERR_PTR(-EINVAL) if no GPIO exists + * in the given chip for the specified hardware number. + */ +struct gpio_desc *gpiochip_get_desc(struct gpio_chip *chip, + u16 hwnum) +{ + struct gpio_device *gdev = chip->gpiodev; + + if (hwnum >= gdev->ngpio) + return ERR_PTR(-EINVAL); + + return &gdev->descs[hwnum]; +} + +/** + * desc_to_gpio - convert a GPIO descriptor to the integer namespace + * @desc: GPIO descriptor + * + * This should disappear in the future but is needed since we still + * use GPIO numbers for error messages and sysfs nodes. + * + * Returns: + * The global GPIO number for the GPIO specified by its descriptor. + */ +int desc_to_gpio(const struct gpio_desc *desc) +{ + return desc->gdev->base + (desc - &desc->gdev->descs[0]); +} +EXPORT_SYMBOL_GPL(desc_to_gpio); + + +/** + * gpiod_to_chip - Return the GPIO chip to which a GPIO descriptor belongs + * @desc: descriptor to return the chip of + */ +struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc) +{ + if (!desc || !desc->gdev) + return NULL; + return desc->gdev->chip; +} +EXPORT_SYMBOL_GPL(gpiod_to_chip); + +/* dynamic allocation of GPIOs, e.g. on a hotplugged device */ +static int gpiochip_find_base(int ngpio) +{ + struct gpio_device *gdev; + int base = ARCH_NR_GPIOS - ngpio; + + list_for_each_entry_reverse(gdev, &gpio_devices, list) { + /* found a free space? */ + if (gdev->base + gdev->ngpio <= base) + break; + else + /* nope, check the space right before the chip */ + base = gdev->base - ngpio; + } + + if (gpio_is_valid(base)) { + pr_debug("%s: found new base at %d\n", __func__, base); + return base; + } else { + pr_err("%s: cannot find free range\n", __func__); + return -ENOSPC; + } +} + +/** + * gpiod_get_direction - return the current direction of a GPIO + * @desc: GPIO to get the direction of + * + * Returns 0 for output, 1 for input, or an error code in case of error. + * + * This function may sleep if gpiod_cansleep() is true. + */ +int gpiod_get_direction(struct gpio_desc *desc) +{ + struct gpio_chip *chip; + unsigned offset; + int status = -EINVAL; + + chip = gpiod_to_chip(desc); + offset = gpio_chip_hwgpio(desc); + + /* + * Open drain emulation using input mode may incorrectly report + * input here, fix that up. + */ + if (test_bit(FLAG_OPEN_DRAIN, &desc->flags) && + test_bit(FLAG_IS_OUT, &desc->flags)) + return 0; + + if (!chip->get_direction) + return status; + + status = chip->get_direction(chip, offset); + if (status > 0) { + /* GPIOF_DIR_IN, or other positive */ + status = 1; + clear_bit(FLAG_IS_OUT, &desc->flags); + } + if (status == 0) { + /* GPIOF_DIR_OUT */ + set_bit(FLAG_IS_OUT, &desc->flags); + } + return status; +} +EXPORT_SYMBOL_GPL(gpiod_get_direction); + +/* + * Add a new chip to the global chips list, keeping the list of chips sorted + * by range(means [base, base + ngpio - 1]) order. + * + * Return -EBUSY if the new chip overlaps with some other chip's integer + * space. + */ +static int gpiodev_add_to_list(struct gpio_device *gdev) +{ + struct gpio_device *prev, *next; + + if (list_empty(&gpio_devices)) { + /* initial entry in list */ + list_add_tail(&gdev->list, &gpio_devices); + return 0; + } + + next = list_entry(gpio_devices.next, struct gpio_device, list); + if (gdev->base + gdev->ngpio <= next->base) { + /* add before first entry */ + list_add(&gdev->list, &gpio_devices); + return 0; + } + + prev = list_entry(gpio_devices.prev, struct gpio_device, list); + if (prev->base + prev->ngpio <= gdev->base) { + /* add behind last entry */ + list_add_tail(&gdev->list, &gpio_devices); + return 0; + } + + list_for_each_entry_safe(prev, next, &gpio_devices, list) { + /* at the end of the list */ + if (&next->list == &gpio_devices) + break; + + /* add between prev and next */ + if (prev->base + prev->ngpio <= gdev->base + && gdev->base + gdev->ngpio <= next->base) { + list_add(&gdev->list, &prev->list); + return 0; + } + } + + dev_err(&gdev->dev, "GPIO integer space overlap, cannot add chip\n"); + return -EBUSY; +} + +/* + * Convert a GPIO name to its descriptor + */ +static struct gpio_desc *gpio_name_to_desc(const char * const name) +{ + struct gpio_device *gdev; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + list_for_each_entry(gdev, &gpio_devices, list) { + int i; + + for (i = 0; i != gdev->ngpio; ++i) { + struct gpio_desc *desc = &gdev->descs[i]; + + if (!desc->name || !name) + continue; + + if (!strcmp(desc->name, name)) { + spin_unlock_irqrestore(&gpio_lock, flags); + return desc; + } + } + } + + spin_unlock_irqrestore(&gpio_lock, flags); + + return NULL; +} + +/* + * Takes the names from gc->names and checks if they are all unique. If they + * are, they are assigned to their gpio descriptors. + * + * Warning if one of the names is already used for a different GPIO. + */ +static int gpiochip_set_desc_names(struct gpio_chip *gc) +{ + struct gpio_device *gdev = gc->gpiodev; + int i; + + if (!gc->names) + return 0; + + /* First check all names if they are unique */ + for (i = 0; i != gc->ngpio; ++i) { + struct gpio_desc *gpio; + + gpio = gpio_name_to_desc(gc->names[i]); + if (gpio) + dev_warn(&gdev->dev, + "Detected name collision for GPIO name '%s'\n", + gc->names[i]); + } + + /* Then add all names to the GPIO descriptors */ + for (i = 0; i != gc->ngpio; ++i) + gdev->descs[i].name = gc->names[i]; + + return 0; +} + +static unsigned long *gpiochip_allocate_mask(struct gpio_chip *chip) +{ + unsigned long *p; + + p = kmalloc_array(BITS_TO_LONGS(chip->ngpio), sizeof(*p), GFP_KERNEL); + if (!p) + return NULL; + + /* Assume by default all GPIOs are valid */ + bitmap_fill(p, chip->ngpio); + + return p; +} + +static int gpiochip_init_valid_mask(struct gpio_chip *gpiochip) +{ +#ifdef CONFIG_OF_GPIO + int size; + struct device_node *np = gpiochip->of_node; + + size = of_property_count_u32_elems(np, "gpio-reserved-ranges"); + if (size > 0 && size % 2 == 0) + gpiochip->need_valid_mask = true; +#endif + + if (!gpiochip->need_valid_mask) + return 0; + + gpiochip->valid_mask = gpiochip_allocate_mask(gpiochip); + if (!gpiochip->valid_mask) + return -ENOMEM; + + return 0; +} + +static void gpiochip_free_valid_mask(struct gpio_chip *gpiochip) +{ + kfree(gpiochip->valid_mask); + gpiochip->valid_mask = NULL; +} + +bool gpiochip_line_is_valid(const struct gpio_chip *gpiochip, + unsigned int offset) +{ + /* No mask means all valid */ + if (likely(!gpiochip->valid_mask)) + return true; + return test_bit(offset, gpiochip->valid_mask); +} +EXPORT_SYMBOL_GPL(gpiochip_line_is_valid); + +/* + * GPIO line handle management + */ + +/** + * struct linehandle_state - contains the state of a userspace handle + * @gdev: the GPIO device the handle pertains to + * @label: consumer label used to tag descriptors + * @descs: the GPIO descriptors held by this handle + * @numdescs: the number of descriptors held in the descs array + */ +struct linehandle_state { + struct gpio_device *gdev; + const char *label; + struct gpio_desc *descs[GPIOHANDLES_MAX]; + u32 numdescs; +}; + +#define GPIOHANDLE_REQUEST_VALID_FLAGS \ + (GPIOHANDLE_REQUEST_INPUT | \ + GPIOHANDLE_REQUEST_OUTPUT | \ + GPIOHANDLE_REQUEST_ACTIVE_LOW | \ + GPIOHANDLE_REQUEST_OPEN_DRAIN | \ + GPIOHANDLE_REQUEST_OPEN_SOURCE) + +static long linehandle_ioctl(struct file *filep, unsigned int cmd, + unsigned long arg) +{ + struct linehandle_state *lh = filep->private_data; + void __user *ip = (void __user *)arg; + struct gpiohandle_data ghd; + int vals[GPIOHANDLES_MAX]; + int i; + + if (cmd == GPIOHANDLE_GET_LINE_VALUES_IOCTL) { + /* NOTE: It's ok to read values of output lines. */ + int ret = gpiod_get_array_value_complex(false, + true, + lh->numdescs, + lh->descs, + vals); + if (ret) + return ret; + + memset(&ghd, 0, sizeof(ghd)); + for (i = 0; i < lh->numdescs; i++) + ghd.values[i] = vals[i]; + + if (copy_to_user(ip, &ghd, sizeof(ghd))) + return -EFAULT; + + return 0; + } else if (cmd == GPIOHANDLE_SET_LINE_VALUES_IOCTL) { + /* + * All line descriptors were created at once with the same + * flags so just check if the first one is really output. + */ + if (!test_bit(FLAG_IS_OUT, &lh->descs[0]->flags)) + return -EPERM; + + if (copy_from_user(&ghd, ip, sizeof(ghd))) + return -EFAULT; + + /* Clamp all values to [0,1] */ + for (i = 0; i < lh->numdescs; i++) + vals[i] = !!ghd.values[i]; + + /* Reuse the array setting function */ + return gpiod_set_array_value_complex(false, + true, + lh->numdescs, + lh->descs, + vals); + } + return -EINVAL; +} + +#ifdef CONFIG_COMPAT +static long linehandle_ioctl_compat(struct file *filep, unsigned int cmd, + unsigned long arg) +{ + return linehandle_ioctl(filep, cmd, (unsigned long)compat_ptr(arg)); +} +#endif + +static int linehandle_release(struct inode *inode, struct file *filep) +{ + struct linehandle_state *lh = filep->private_data; + struct gpio_device *gdev = lh->gdev; + int i; + + for (i = 0; i < lh->numdescs; i++) + gpiod_free(lh->descs[i]); + kfree(lh->label); + kfree(lh); + put_device(&gdev->dev); + return 0; +} + +static const struct file_operations linehandle_fileops = { + .release = linehandle_release, + .owner = THIS_MODULE, + .llseek = noop_llseek, + .unlocked_ioctl = linehandle_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = linehandle_ioctl_compat, +#endif +}; + +static int linehandle_create(struct gpio_device *gdev, void __user *ip) +{ + struct gpiohandle_request handlereq; + struct linehandle_state *lh; + struct file *file; + int fd, i, count = 0, ret; + u32 lflags; + + if (copy_from_user(&handlereq, ip, sizeof(handlereq))) + return -EFAULT; + if ((handlereq.lines == 0) || (handlereq.lines > GPIOHANDLES_MAX)) + return -EINVAL; + + lflags = handlereq.flags; + + /* Return an error if an unknown flag is set */ + if (lflags & ~GPIOHANDLE_REQUEST_VALID_FLAGS) + return -EINVAL; + + /* + * Do not allow both INPUT & OUTPUT flags to be set as they are + * contradictory. + */ + if ((lflags & GPIOHANDLE_REQUEST_INPUT) && + (lflags & GPIOHANDLE_REQUEST_OUTPUT)) + return -EINVAL; + + /* + * Do not allow OPEN_SOURCE & OPEN_DRAIN flags in a single request. If + * the hardware actually supports enabling both at the same time the + * electrical result would be disastrous. + */ + if ((lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN) && + (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)) + return -EINVAL; + + /* OPEN_DRAIN and OPEN_SOURCE flags only make sense for output mode. */ + if (!(lflags & GPIOHANDLE_REQUEST_OUTPUT) && + ((lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN) || + (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE))) + return -EINVAL; + + lh = kzalloc(sizeof(*lh), GFP_KERNEL); + if (!lh) + return -ENOMEM; + lh->gdev = gdev; + get_device(&gdev->dev); + + /* Make sure this is terminated */ + handlereq.consumer_label[sizeof(handlereq.consumer_label)-1] = '\0'; + if (strlen(handlereq.consumer_label)) { + lh->label = kstrdup(handlereq.consumer_label, + GFP_KERNEL); + if (!lh->label) { + ret = -ENOMEM; + goto out_free_lh; + } + } + + /* Request each GPIO */ + for (i = 0; i < handlereq.lines; i++) { + u32 offset = handlereq.lineoffsets[i]; + struct gpio_desc *desc; + + if (offset >= gdev->ngpio) { + ret = -EINVAL; + goto out_free_descs; + } + + desc = &gdev->descs[offset]; + ret = gpiod_request(desc, lh->label); + if (ret) + goto out_free_descs; + lh->descs[i] = desc; + count = i + 1; + + if (lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW) + set_bit(FLAG_ACTIVE_LOW, &desc->flags); + if (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN) + set_bit(FLAG_OPEN_DRAIN, &desc->flags); + if (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE) + set_bit(FLAG_OPEN_SOURCE, &desc->flags); + + ret = gpiod_set_transitory(desc, false); + if (ret < 0) + goto out_free_descs; + + /* + * Lines have to be requested explicitly for input + * or output, else the line will be treated "as is". + */ + if (lflags & GPIOHANDLE_REQUEST_OUTPUT) { + int val = !!handlereq.default_values[i]; + + ret = gpiod_direction_output(desc, val); + if (ret) + goto out_free_descs; + } else if (lflags & GPIOHANDLE_REQUEST_INPUT) { + ret = gpiod_direction_input(desc); + if (ret) + goto out_free_descs; + } + dev_dbg(&gdev->dev, "registered chardev handle for line %d\n", + offset); + } + /* Let i point at the last handle */ + i--; + lh->numdescs = handlereq.lines; + + fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC); + if (fd < 0) { + ret = fd; + goto out_free_descs; + } + + file = anon_inode_getfile("gpio-linehandle", + &linehandle_fileops, + lh, + O_RDONLY | O_CLOEXEC); + if (IS_ERR(file)) { + ret = PTR_ERR(file); + goto out_put_unused_fd; + } + + handlereq.fd = fd; + if (copy_to_user(ip, &handlereq, sizeof(handlereq))) { + /* + * fput() will trigger the release() callback, so do not go onto + * the regular error cleanup path here. + */ + fput(file); + put_unused_fd(fd); + return -EFAULT; + } + + fd_install(fd, file); + + dev_dbg(&gdev->dev, "registered chardev handle for %d lines\n", + lh->numdescs); + + return 0; + +out_put_unused_fd: + put_unused_fd(fd); +out_free_descs: + for (i = 0; i < count; i++) + gpiod_free(lh->descs[i]); + kfree(lh->label); +out_free_lh: + kfree(lh); + put_device(&gdev->dev); + return ret; +} + +/* + * GPIO line event management + */ + +/** + * struct lineevent_state - contains the state of a userspace event + * @gdev: the GPIO device the event pertains to + * @label: consumer label used to tag descriptors + * @desc: the GPIO descriptor held by this event + * @eflags: the event flags this line was requested with + * @irq: the interrupt that trigger in response to events on this GPIO + * @wait: wait queue that handles blocking reads of events + * @events: KFIFO for the GPIO events + * @read_lock: mutex lock to protect reads from colliding with adding + * new events to the FIFO + * @timestamp: cache for the timestamp storing it between hardirq + * and IRQ thread, used to bring the timestamp close to the actual + * event + */ +struct lineevent_state { + struct gpio_device *gdev; + const char *label; + struct gpio_desc *desc; + u32 eflags; + int irq; + wait_queue_head_t wait; + DECLARE_KFIFO(events, struct gpioevent_data, 16); + struct mutex read_lock; + u64 timestamp; +}; + +#define GPIOEVENT_REQUEST_VALID_FLAGS \ + (GPIOEVENT_REQUEST_RISING_EDGE | \ + GPIOEVENT_REQUEST_FALLING_EDGE) + +static __poll_t lineevent_poll(struct file *filep, + struct poll_table_struct *wait) +{ + struct lineevent_state *le = filep->private_data; + __poll_t events = 0; + + poll_wait(filep, &le->wait, wait); + + if (!kfifo_is_empty(&le->events)) + events = EPOLLIN | EPOLLRDNORM; + + return events; +} + + +static ssize_t lineevent_read(struct file *filep, + char __user *buf, + size_t count, + loff_t *f_ps) +{ + struct lineevent_state *le = filep->private_data; + unsigned int copied; + int ret; + + if (count < sizeof(struct gpioevent_data)) + return -EINVAL; + + do { + if (kfifo_is_empty(&le->events)) { + if (filep->f_flags & O_NONBLOCK) + return -EAGAIN; + + ret = wait_event_interruptible(le->wait, + !kfifo_is_empty(&le->events)); + if (ret) + return ret; + } + + if (mutex_lock_interruptible(&le->read_lock)) + return -ERESTARTSYS; + ret = kfifo_to_user(&le->events, buf, count, &copied); + mutex_unlock(&le->read_lock); + + if (ret) + return ret; + + /* + * If we couldn't read anything from the fifo (a different + * thread might have been faster) we either return -EAGAIN if + * the file descriptor is non-blocking, otherwise we go back to + * sleep and wait for more data to arrive. + */ + if (copied == 0 && (filep->f_flags & O_NONBLOCK)) + return -EAGAIN; + + } while (copied == 0); + + return copied; +} + +static int lineevent_release(struct inode *inode, struct file *filep) +{ + struct lineevent_state *le = filep->private_data; + struct gpio_device *gdev = le->gdev; + + free_irq(le->irq, le); + gpiod_free(le->desc); + kfree(le->label); + kfree(le); + put_device(&gdev->dev); + return 0; +} + +static long lineevent_ioctl(struct file *filep, unsigned int cmd, + unsigned long arg) +{ + struct lineevent_state *le = filep->private_data; + void __user *ip = (void __user *)arg; + struct gpiohandle_data ghd; + + /* + * We can get the value for an event line but not set it, + * because it is input by definition. + */ + if (cmd == GPIOHANDLE_GET_LINE_VALUES_IOCTL) { + int val; + + memset(&ghd, 0, sizeof(ghd)); + + val = gpiod_get_value_cansleep(le->desc); + if (val < 0) + return val; + ghd.values[0] = val; + + if (copy_to_user(ip, &ghd, sizeof(ghd))) + return -EFAULT; + + return 0; + } + return -EINVAL; +} + +#ifdef CONFIG_COMPAT +static long lineevent_ioctl_compat(struct file *filep, unsigned int cmd, + unsigned long arg) +{ + return lineevent_ioctl(filep, cmd, (unsigned long)compat_ptr(arg)); +} +#endif + +static const struct file_operations lineevent_fileops = { + .release = lineevent_release, + .read = lineevent_read, + .poll = lineevent_poll, + .owner = THIS_MODULE, + .llseek = noop_llseek, + .unlocked_ioctl = lineevent_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = lineevent_ioctl_compat, +#endif +}; + +static irqreturn_t lineevent_irq_thread(int irq, void *p) +{ + struct lineevent_state *le = p; + struct gpioevent_data ge; + int ret, level; + + /* Do not leak kernel stack to userspace */ + memset(&ge, 0, sizeof(ge)); + + /* + * We may be running from a nested threaded interrupt in which case + * we didn't get the timestamp from lineevent_irq_handler(). + */ + if (!le->timestamp) + ge.timestamp = ktime_get_real_ns(); + else + ge.timestamp = le->timestamp; + + level = gpiod_get_value_cansleep(le->desc); + + if (le->eflags & GPIOEVENT_REQUEST_RISING_EDGE + && le->eflags & GPIOEVENT_REQUEST_FALLING_EDGE) { + if (level) + /* Emit low-to-high event */ + ge.id = GPIOEVENT_EVENT_RISING_EDGE; + else + /* Emit high-to-low event */ + ge.id = GPIOEVENT_EVENT_FALLING_EDGE; + } else if (le->eflags & GPIOEVENT_REQUEST_RISING_EDGE && level) { + /* Emit low-to-high event */ + ge.id = GPIOEVENT_EVENT_RISING_EDGE; + } else if (le->eflags & GPIOEVENT_REQUEST_FALLING_EDGE && !level) { + /* Emit high-to-low event */ + ge.id = GPIOEVENT_EVENT_FALLING_EDGE; + } else { + return IRQ_NONE; + } + + ret = kfifo_put(&le->events, ge); + if (ret != 0) + wake_up_poll(&le->wait, EPOLLIN); + + return IRQ_HANDLED; +} + +static irqreturn_t lineevent_irq_handler(int irq, void *p) +{ + struct lineevent_state *le = p; + + /* + * Just store the timestamp in hardirq context so we get it as + * close in time as possible to the actual event. + */ + le->timestamp = ktime_get_real_ns(); + + return IRQ_WAKE_THREAD; +} + +static int lineevent_create(struct gpio_device *gdev, void __user *ip) +{ + struct gpioevent_request eventreq; + struct lineevent_state *le; + struct gpio_desc *desc; + struct file *file; + u32 offset; + u32 lflags; + u32 eflags; + int fd; + int ret; + int irqflags = 0; + + if (copy_from_user(&eventreq, ip, sizeof(eventreq))) + return -EFAULT; + + le = kzalloc(sizeof(*le), GFP_KERNEL); + if (!le) + return -ENOMEM; + le->gdev = gdev; + get_device(&gdev->dev); + + /* Make sure this is terminated */ + eventreq.consumer_label[sizeof(eventreq.consumer_label)-1] = '\0'; + if (strlen(eventreq.consumer_label)) { + le->label = kstrdup(eventreq.consumer_label, + GFP_KERNEL); + if (!le->label) { + ret = -ENOMEM; + goto out_free_le; + } + } + + offset = eventreq.lineoffset; + lflags = eventreq.handleflags; + eflags = eventreq.eventflags; + + if (offset >= gdev->ngpio) { + ret = -EINVAL; + goto out_free_label; + } + + /* Return an error if a unknown flag is set */ + if ((lflags & ~GPIOHANDLE_REQUEST_VALID_FLAGS) || + (eflags & ~GPIOEVENT_REQUEST_VALID_FLAGS)) { + ret = -EINVAL; + goto out_free_label; + } + + /* This is just wrong: we don't look for events on output lines */ + if ((lflags & GPIOHANDLE_REQUEST_OUTPUT) || + (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN) || + (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)) { + ret = -EINVAL; + goto out_free_label; + } + + desc = &gdev->descs[offset]; + ret = gpiod_request(desc, le->label); + if (ret) + goto out_free_label; + le->desc = desc; + le->eflags = eflags; + + if (lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW) + set_bit(FLAG_ACTIVE_LOW, &desc->flags); + + ret = gpiod_direction_input(desc); + if (ret) + goto out_free_desc; + + le->irq = gpiod_to_irq(desc); + if (le->irq <= 0) { + ret = -ENODEV; + goto out_free_desc; + } + + if (eflags & GPIOEVENT_REQUEST_RISING_EDGE) + irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ? + IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING; + if (eflags & GPIOEVENT_REQUEST_FALLING_EDGE) + irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ? + IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING; + irqflags |= IRQF_ONESHOT; + irqflags |= IRQF_SHARED; + + INIT_KFIFO(le->events); + init_waitqueue_head(&le->wait); + mutex_init(&le->read_lock); + + /* Request a thread to read the events */ + ret = request_threaded_irq(le->irq, + lineevent_irq_handler, + lineevent_irq_thread, + irqflags, + le->label, + le); + if (ret) + goto out_free_desc; + + fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC); + if (fd < 0) { + ret = fd; + goto out_free_irq; + } + + file = anon_inode_getfile("gpio-event", + &lineevent_fileops, + le, + O_RDONLY | O_CLOEXEC); + if (IS_ERR(file)) { + ret = PTR_ERR(file); + goto out_put_unused_fd; + } + + eventreq.fd = fd; + if (copy_to_user(ip, &eventreq, sizeof(eventreq))) { + /* + * fput() will trigger the release() callback, so do not go onto + * the regular error cleanup path here. + */ + fput(file); + put_unused_fd(fd); + return -EFAULT; + } + + fd_install(fd, file); + + return 0; + +out_put_unused_fd: + put_unused_fd(fd); +out_free_irq: + free_irq(le->irq, le); +out_free_desc: + gpiod_free(le->desc); +out_free_label: + kfree(le->label); +out_free_le: + kfree(le); + put_device(&gdev->dev); + return ret; +} + +/* + * gpio_ioctl() - ioctl handler for the GPIO chardev + */ +static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) +{ + struct gpio_device *gdev = filp->private_data; + struct gpio_chip *chip = gdev->chip; + void __user *ip = (void __user *)arg; + + /* We fail any subsequent ioctl():s when the chip is gone */ + if (!chip) + return -ENODEV; + + /* Fill in the struct and pass to userspace */ + if (cmd == GPIO_GET_CHIPINFO_IOCTL) { + struct gpiochip_info chipinfo; + + memset(&chipinfo, 0, sizeof(chipinfo)); + + strncpy(chipinfo.name, dev_name(&gdev->dev), + sizeof(chipinfo.name)); + chipinfo.name[sizeof(chipinfo.name)-1] = '\0'; + strncpy(chipinfo.label, gdev->label, + sizeof(chipinfo.label)); + chipinfo.label[sizeof(chipinfo.label)-1] = '\0'; + chipinfo.lines = gdev->ngpio; + if (copy_to_user(ip, &chipinfo, sizeof(chipinfo))) + return -EFAULT; + return 0; + } else if (cmd == GPIO_GET_LINEINFO_IOCTL) { + struct gpioline_info lineinfo; + struct gpio_desc *desc; + + if (copy_from_user(&lineinfo, ip, sizeof(lineinfo))) + return -EFAULT; + if (lineinfo.line_offset >= gdev->ngpio) + return -EINVAL; + + desc = &gdev->descs[lineinfo.line_offset]; + if (desc->name) { + strncpy(lineinfo.name, desc->name, + sizeof(lineinfo.name)); + lineinfo.name[sizeof(lineinfo.name)-1] = '\0'; + } else { + lineinfo.name[0] = '\0'; + } + if (desc->label) { + strncpy(lineinfo.consumer, desc->label, + sizeof(lineinfo.consumer)); + lineinfo.consumer[sizeof(lineinfo.consumer)-1] = '\0'; + } else { + lineinfo.consumer[0] = '\0'; + } + + /* + * Userspace only need to know that the kernel is using + * this GPIO so it can't use it. + */ + lineinfo.flags = 0; + if (test_bit(FLAG_REQUESTED, &desc->flags) || + test_bit(FLAG_IS_HOGGED, &desc->flags) || + test_bit(FLAG_USED_AS_IRQ, &desc->flags) || + test_bit(FLAG_EXPORT, &desc->flags) || + test_bit(FLAG_SYSFS, &desc->flags)) + lineinfo.flags |= GPIOLINE_FLAG_KERNEL; + if (test_bit(FLAG_IS_OUT, &desc->flags)) + lineinfo.flags |= GPIOLINE_FLAG_IS_OUT; + if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) + lineinfo.flags |= GPIOLINE_FLAG_ACTIVE_LOW; + if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) + lineinfo.flags |= (GPIOLINE_FLAG_OPEN_DRAIN | + GPIOLINE_FLAG_IS_OUT); + if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) + lineinfo.flags |= (GPIOLINE_FLAG_OPEN_SOURCE | + GPIOLINE_FLAG_IS_OUT); + + if (copy_to_user(ip, &lineinfo, sizeof(lineinfo))) + return -EFAULT; + return 0; + } else if (cmd == GPIO_GET_LINEHANDLE_IOCTL) { + return linehandle_create(gdev, ip); + } else if (cmd == GPIO_GET_LINEEVENT_IOCTL) { + return lineevent_create(gdev, ip); + } + return -EINVAL; +} + +#ifdef CONFIG_COMPAT +static long gpio_ioctl_compat(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + return gpio_ioctl(filp, cmd, (unsigned long)compat_ptr(arg)); +} +#endif + +/** + * gpio_chrdev_open() - open the chardev for ioctl operations + * @inode: inode for this chardev + * @filp: file struct for storing private data + * Returns 0 on success + */ +static int gpio_chrdev_open(struct inode *inode, struct file *filp) +{ + struct gpio_device *gdev = container_of(inode->i_cdev, + struct gpio_device, chrdev); + + /* Fail on open if the backing gpiochip is gone */ + if (!gdev->chip) + return -ENODEV; + get_device(&gdev->dev); + filp->private_data = gdev; + + return nonseekable_open(inode, filp); +} + +/** + * gpio_chrdev_release() - close chardev after ioctl operations + * @inode: inode for this chardev + * @filp: file struct for storing private data + * Returns 0 on success + */ +static int gpio_chrdev_release(struct inode *inode, struct file *filp) +{ + struct gpio_device *gdev = container_of(inode->i_cdev, + struct gpio_device, chrdev); + + put_device(&gdev->dev); + return 0; +} + + +static const struct file_operations gpio_fileops = { + .release = gpio_chrdev_release, + .open = gpio_chrdev_open, + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = gpio_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = gpio_ioctl_compat, +#endif +}; + +static void gpiodevice_release(struct device *dev) +{ + struct gpio_device *gdev = dev_get_drvdata(dev); + + list_del(&gdev->list); + ida_simple_remove(&gpio_ida, gdev->id); + kfree_const(gdev->label); + kfree(gdev->descs); + kfree(gdev); +} + +static int gpiochip_setup_dev(struct gpio_device *gdev) +{ + int status; + + cdev_init(&gdev->chrdev, &gpio_fileops); + gdev->chrdev.owner = THIS_MODULE; + gdev->dev.devt = MKDEV(MAJOR(gpio_devt), gdev->id); + + status = cdev_device_add(&gdev->chrdev, &gdev->dev); + if (status) + return status; + + chip_dbg(gdev->chip, "added GPIO chardev (%d:%d)\n", + MAJOR(gpio_devt), gdev->id); + + status = gpiochip_sysfs_register(gdev); + if (status) + goto err_remove_device; + + /* From this point, the .release() function cleans up gpio_device */ + gdev->dev.release = gpiodevice_release; + pr_debug("%s: registered GPIOs %d to %d on device: %s (%s)\n", + __func__, gdev->base, gdev->base + gdev->ngpio - 1, + dev_name(&gdev->dev), gdev->chip->label ? : "generic"); + + return 0; + +err_remove_device: + cdev_device_del(&gdev->chrdev, &gdev->dev); + return status; +} + +static void gpiochip_machine_hog(struct gpio_chip *chip, struct gpiod_hog *hog) +{ + struct gpio_desc *desc; + int rv; + + desc = gpiochip_get_desc(chip, hog->chip_hwnum); + if (IS_ERR(desc)) { + pr_err("%s: unable to get GPIO desc: %ld\n", + __func__, PTR_ERR(desc)); + return; + } + + if (test_bit(FLAG_IS_HOGGED, &desc->flags)) + return; + + rv = gpiod_hog(desc, hog->line_name, hog->lflags, hog->dflags); + if (rv) + pr_err("%s: unable to hog GPIO line (%s:%u): %d\n", + __func__, chip->label, hog->chip_hwnum, rv); +} + +static void machine_gpiochip_add(struct gpio_chip *chip) +{ + struct gpiod_hog *hog; + + mutex_lock(&gpio_machine_hogs_mutex); + + list_for_each_entry(hog, &gpio_machine_hogs, list) { + if (!strcmp(chip->label, hog->chip_label)) + gpiochip_machine_hog(chip, hog); + } + + mutex_unlock(&gpio_machine_hogs_mutex); +} + +static void gpiochip_setup_devs(void) +{ + struct gpio_device *gdev; + int err; + + list_for_each_entry(gdev, &gpio_devices, list) { + err = gpiochip_setup_dev(gdev); + if (err) + pr_err("%s: Failed to initialize gpio device (%d)\n", + dev_name(&gdev->dev), err); + } +} + +int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data, + struct lock_class_key *lock_key, + struct lock_class_key *request_key) +{ + unsigned long flags; + int status = 0; + unsigned i; + int base = chip->base; + struct gpio_device *gdev; + + /* + * First: allocate and populate the internal stat container, and + * set up the struct device. + */ + gdev = kzalloc(sizeof(*gdev), GFP_KERNEL); + if (!gdev) + return -ENOMEM; + gdev->dev.bus = &gpio_bus_type; + gdev->chip = chip; + chip->gpiodev = gdev; + if (chip->parent) { + gdev->dev.parent = chip->parent; + gdev->dev.of_node = chip->parent->of_node; + } + +#ifdef CONFIG_OF_GPIO + /* If the gpiochip has an assigned OF node this takes precedence */ + if (chip->of_node) + gdev->dev.of_node = chip->of_node; + else + chip->of_node = gdev->dev.of_node; +#endif + + gdev->id = ida_simple_get(&gpio_ida, 0, 0, GFP_KERNEL); + if (gdev->id < 0) { + status = gdev->id; + goto err_free_gdev; + } + dev_set_name(&gdev->dev, "gpiochip%d", gdev->id); + device_initialize(&gdev->dev); + dev_set_drvdata(&gdev->dev, gdev); + if (chip->parent && chip->parent->driver) + gdev->owner = chip->parent->driver->owner; + else if (chip->owner) + /* TODO: remove chip->owner */ + gdev->owner = chip->owner; + else + gdev->owner = THIS_MODULE; + + gdev->descs = kcalloc(chip->ngpio, sizeof(gdev->descs[0]), GFP_KERNEL); + if (!gdev->descs) { + status = -ENOMEM; + goto err_free_ida; + } + + if (chip->ngpio == 0) { + chip_err(chip, "tried to insert a GPIO chip with zero lines\n"); + status = -EINVAL; + goto err_free_descs; + } + + if (chip->ngpio > FASTPATH_NGPIO) + chip_warn(chip, "line cnt %u is greater than fast path cnt %u\n", + chip->ngpio, FASTPATH_NGPIO); + + gdev->label = kstrdup_const(chip->label ?: "unknown", GFP_KERNEL); + if (!gdev->label) { + status = -ENOMEM; + goto err_free_descs; + } + + gdev->ngpio = chip->ngpio; + gdev->data = data; + + spin_lock_irqsave(&gpio_lock, flags); + + /* + * TODO: this allocates a Linux GPIO number base in the global + * GPIO numberspace for this chip. In the long run we want to + * get *rid* of this numberspace and use only descriptors, but + * it may be a pipe dream. It will not happen before we get rid + * of the sysfs interface anyways. + */ + if (base < 0) { + base = gpiochip_find_base(chip->ngpio); + if (base < 0) { + status = base; + spin_unlock_irqrestore(&gpio_lock, flags); + goto err_free_label; + } + /* + * TODO: it should not be necessary to reflect the assigned + * base outside of the GPIO subsystem. Go over drivers and + * see if anyone makes use of this, else drop this and assign + * a poison instead. + */ + chip->base = base; + } + gdev->base = base; + + status = gpiodev_add_to_list(gdev); + if (status) { + spin_unlock_irqrestore(&gpio_lock, flags); + goto err_free_label; + } + + spin_unlock_irqrestore(&gpio_lock, flags); + + for (i = 0; i < chip->ngpio; i++) { + struct gpio_desc *desc = &gdev->descs[i]; + + desc->gdev = gdev; + + /* REVISIT: most hardware initializes GPIOs as inputs (often + * with pullups enabled) so power usage is minimized. Linux + * code should set the gpio direction first thing; but until + * it does, and in case chip->get_direction is not set, we may + * expose the wrong direction in sysfs. + */ + desc->flags = !chip->direction_input ? (1 << FLAG_IS_OUT) : 0; + } + +#ifdef CONFIG_PINCTRL + INIT_LIST_HEAD(&gdev->pin_ranges); +#endif + + status = gpiochip_set_desc_names(chip); + if (status) + goto err_remove_from_list; + + status = gpiochip_irqchip_init_valid_mask(chip); + if (status) + goto err_remove_from_list; + + status = gpiochip_init_valid_mask(chip); + if (status) + goto err_remove_irqchip_mask; + + status = gpiochip_add_irqchip(chip, lock_key, request_key); + if (status) + goto err_remove_chip; + + status = of_gpiochip_add(chip); + if (status) + goto err_remove_chip; + + acpi_gpiochip_add(chip); + + machine_gpiochip_add(chip); + + /* + * By first adding the chardev, and then adding the device, + * we get a device node entry in sysfs under + * /sys/bus/gpio/devices/gpiochipN/dev that can be used for + * coldplug of device nodes and other udev business. + * We can do this only if gpiolib has been initialized. + * Otherwise, defer until later. + */ + if (gpiolib_initialized) { + status = gpiochip_setup_dev(gdev); + if (status) + goto err_remove_chip; + } + return 0; + +err_remove_chip: + acpi_gpiochip_remove(chip); + gpiochip_free_hogs(chip); + of_gpiochip_remove(chip); + gpiochip_free_valid_mask(chip); +err_remove_irqchip_mask: + gpiochip_irqchip_free_valid_mask(chip); +err_remove_from_list: + spin_lock_irqsave(&gpio_lock, flags); + list_del(&gdev->list); + spin_unlock_irqrestore(&gpio_lock, flags); +err_free_label: + kfree_const(gdev->label); +err_free_descs: + kfree(gdev->descs); +err_free_ida: + ida_simple_remove(&gpio_ida, gdev->id); +err_free_gdev: + /* failures here can mean systems won't boot... */ + pr_err("%s: GPIOs %d..%d (%s) failed to register, %d\n", __func__, + gdev->base, gdev->base + gdev->ngpio - 1, + chip->label ? : "generic", status); + kfree(gdev); + return status; +} +EXPORT_SYMBOL_GPL(gpiochip_add_data_with_key); + +/** + * gpiochip_get_data() - get per-subdriver data for the chip + * @chip: GPIO chip + * + * Returns: + * The per-subdriver data for the chip. + */ +void *gpiochip_get_data(struct gpio_chip *chip) +{ + return chip->gpiodev->data; +} +EXPORT_SYMBOL_GPL(gpiochip_get_data); + +/** + * gpiochip_remove() - unregister a gpio_chip + * @chip: the chip to unregister + * + * A gpio_chip with any GPIOs still requested may not be removed. + */ +void gpiochip_remove(struct gpio_chip *chip) +{ + struct gpio_device *gdev = chip->gpiodev; + struct gpio_desc *desc; + unsigned long flags; + unsigned i; + bool requested = false; + + /* FIXME: should the legacy sysfs handling be moved to gpio_device? */ + gpiochip_sysfs_unregister(gdev); + gpiochip_free_hogs(chip); + /* Numb the device, cancelling all outstanding operations */ + gdev->chip = NULL; + gpiochip_irqchip_remove(chip); + acpi_gpiochip_remove(chip); + gpiochip_remove_pin_ranges(chip); + of_gpiochip_remove(chip); + gpiochip_free_valid_mask(chip); + /* + * We accept no more calls into the driver from this point, so + * NULL the driver data pointer + */ + gdev->data = NULL; + + spin_lock_irqsave(&gpio_lock, flags); + for (i = 0; i < gdev->ngpio; i++) { + desc = &gdev->descs[i]; + if (test_bit(FLAG_REQUESTED, &desc->flags)) + requested = true; + } + spin_unlock_irqrestore(&gpio_lock, flags); + + if (requested) + dev_crit(&gdev->dev, + "REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED\n"); + + /* + * The gpiochip side puts its use of the device to rest here: + * if there are no userspace clients, the chardev and device will + * be removed, else it will be dangling until the last user is + * gone. + */ + cdev_device_del(&gdev->chrdev, &gdev->dev); + put_device(&gdev->dev); +} +EXPORT_SYMBOL_GPL(gpiochip_remove); + +static void devm_gpio_chip_release(struct device *dev, void *res) +{ + struct gpio_chip *chip = *(struct gpio_chip **)res; + + gpiochip_remove(chip); +} + +static int devm_gpio_chip_match(struct device *dev, void *res, void *data) + +{ + struct gpio_chip **r = res; + + if (!r || !*r) { + WARN_ON(!r || !*r); + return 0; + } + + return *r == data; +} + +/** + * devm_gpiochip_add_data() - Resource manager gpiochip_add_data() + * @dev: the device pointer on which irq_chip belongs to. + * @chip: the chip to register, with chip->base initialized + * @data: driver-private data associated with this chip + * + * Context: potentially before irqs will work + * + * The gpio chip automatically be released when the device is unbound. + * + * Returns: + * A negative errno if the chip can't be registered, such as because the + * chip->base is invalid or already associated with a different chip. + * Otherwise it returns zero as a success code. + */ +int devm_gpiochip_add_data(struct device *dev, struct gpio_chip *chip, + void *data) +{ + struct gpio_chip **ptr; + int ret; + + ptr = devres_alloc(devm_gpio_chip_release, sizeof(*ptr), + GFP_KERNEL); + if (!ptr) + return -ENOMEM; + + ret = gpiochip_add_data(chip, data); + if (ret < 0) { + devres_free(ptr); + return ret; + } + + *ptr = chip; + devres_add(dev, ptr); + + return 0; +} +EXPORT_SYMBOL_GPL(devm_gpiochip_add_data); + +/** + * devm_gpiochip_remove() - Resource manager of gpiochip_remove() + * @dev: device for which which resource was allocated + * @chip: the chip to remove + * + * A gpio_chip with any GPIOs still requested may not be removed. + */ +void devm_gpiochip_remove(struct device *dev, struct gpio_chip *chip) +{ + int ret; + + ret = devres_release(dev, devm_gpio_chip_release, + devm_gpio_chip_match, chip); + WARN_ON(ret); +} +EXPORT_SYMBOL_GPL(devm_gpiochip_remove); + +/** + * gpiochip_find() - iterator for locating a specific gpio_chip + * @data: data to pass to match function + * @match: Callback function to check gpio_chip + * + * Similar to bus_find_device. It returns a reference to a gpio_chip as + * determined by a user supplied @match callback. The callback should return + * 0 if the device doesn't match and non-zero if it does. If the callback is + * non-zero, this function will return to the caller and not iterate over any + * more gpio_chips. + */ +struct gpio_chip *gpiochip_find(void *data, + int (*match)(struct gpio_chip *chip, + void *data)) +{ + struct gpio_device *gdev; + struct gpio_chip *chip = NULL; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + list_for_each_entry(gdev, &gpio_devices, list) + if (gdev->chip && match(gdev->chip, data)) { + chip = gdev->chip; + break; + } + + spin_unlock_irqrestore(&gpio_lock, flags); + + return chip; +} +EXPORT_SYMBOL_GPL(gpiochip_find); + +static int gpiochip_match_name(struct gpio_chip *chip, void *data) +{ + const char *name = data; + + return !strcmp(chip->label, name); +} + +static struct gpio_chip *find_chip_by_name(const char *name) +{ + return gpiochip_find((void *)name, gpiochip_match_name); +} + +#ifdef CONFIG_GPIOLIB_IRQCHIP + +/* + * The following is irqchip helper code for gpiochips. + */ + +static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip) +{ + if (!gpiochip->irq.need_valid_mask) + return 0; + + gpiochip->irq.valid_mask = gpiochip_allocate_mask(gpiochip); + if (!gpiochip->irq.valid_mask) + return -ENOMEM; + + return 0; +} + +static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip) +{ + kfree(gpiochip->irq.valid_mask); + gpiochip->irq.valid_mask = NULL; +} + +bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip, + unsigned int offset) +{ + if (!gpiochip_line_is_valid(gpiochip, offset)) + return false; + /* No mask means all valid */ + if (likely(!gpiochip->irq.valid_mask)) + return true; + return test_bit(offset, gpiochip->irq.valid_mask); +} +EXPORT_SYMBOL_GPL(gpiochip_irqchip_irq_valid); + +/** + * gpiochip_set_cascaded_irqchip() - connects a cascaded irqchip to a gpiochip + * @gpiochip: the gpiochip to set the irqchip chain to + * @irqchip: the irqchip to chain to the gpiochip + * @parent_irq: the irq number corresponding to the parent IRQ for this + * chained irqchip + * @parent_handler: the parent interrupt handler for the accumulated IRQ + * coming out of the gpiochip. If the interrupt is nested rather than + * cascaded, pass NULL in this handler argument + */ +static void gpiochip_set_cascaded_irqchip(struct gpio_chip *gpiochip, + struct irq_chip *irqchip, + unsigned int parent_irq, + irq_flow_handler_t parent_handler) +{ + unsigned int offset; + + if (!gpiochip->irq.domain) { + chip_err(gpiochip, "called %s before setting up irqchip\n", + __func__); + return; + } + + if (parent_handler) { + if (gpiochip->can_sleep) { + chip_err(gpiochip, + "you cannot have chained interrupts on a chip that may sleep\n"); + return; + } + /* + * The parent irqchip is already using the chip_data for this + * irqchip, so our callbacks simply use the handler_data. + */ + irq_set_chained_handler_and_data(parent_irq, parent_handler, + gpiochip); + + gpiochip->irq.parent_irq = parent_irq; + gpiochip->irq.parents = &gpiochip->irq.parent_irq; + gpiochip->irq.num_parents = 1; + } + + /* Set the parent IRQ for all affected IRQs */ + for (offset = 0; offset < gpiochip->ngpio; offset++) { + if (!gpiochip_irqchip_irq_valid(gpiochip, offset)) + continue; + irq_set_parent(irq_find_mapping(gpiochip->irq.domain, offset), + parent_irq); + } +} + +/** + * gpiochip_set_chained_irqchip() - connects a chained irqchip to a gpiochip + * @gpiochip: the gpiochip to set the irqchip chain to + * @irqchip: the irqchip to chain to the gpiochip + * @parent_irq: the irq number corresponding to the parent IRQ for this + * chained irqchip + * @parent_handler: the parent interrupt handler for the accumulated IRQ + * coming out of the gpiochip. If the interrupt is nested rather than + * cascaded, pass NULL in this handler argument + */ +void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip, + struct irq_chip *irqchip, + unsigned int parent_irq, + irq_flow_handler_t parent_handler) +{ + if (gpiochip->irq.threaded) { + chip_err(gpiochip, "tried to chain a threaded gpiochip\n"); + return; + } + + gpiochip_set_cascaded_irqchip(gpiochip, irqchip, parent_irq, + parent_handler); +} +EXPORT_SYMBOL_GPL(gpiochip_set_chained_irqchip); + +/** + * gpiochip_set_nested_irqchip() - connects a nested irqchip to a gpiochip + * @gpiochip: the gpiochip to set the irqchip nested handler to + * @irqchip: the irqchip to nest to the gpiochip + * @parent_irq: the irq number corresponding to the parent IRQ for this + * nested irqchip + */ +void gpiochip_set_nested_irqchip(struct gpio_chip *gpiochip, + struct irq_chip *irqchip, + unsigned int parent_irq) +{ + gpiochip_set_cascaded_irqchip(gpiochip, irqchip, parent_irq, + NULL); +} +EXPORT_SYMBOL_GPL(gpiochip_set_nested_irqchip); + +/** + * gpiochip_irq_map() - maps an IRQ into a GPIO irqchip + * @d: the irqdomain used by this irqchip + * @irq: the global irq number used by this GPIO irqchip irq + * @hwirq: the local IRQ/GPIO line offset on this gpiochip + * + * This function will set up the mapping for a certain IRQ line on a + * gpiochip by assigning the gpiochip as chip data, and using the irqchip + * stored inside the gpiochip. + */ +int gpiochip_irq_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct gpio_chip *chip = d->host_data; + int err = 0; + + if (!gpiochip_irqchip_irq_valid(chip, hwirq)) + return -ENXIO; + + irq_set_chip_data(irq, chip); + /* + * This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ + irq_set_lockdep_class(irq, chip->irq.lock_key, chip->irq.request_key); + irq_set_chip_and_handler(irq, chip->irq.chip, chip->irq.handler); + /* Chips that use nested thread handlers have them marked */ + if (chip->irq.threaded) + irq_set_nested_thread(irq, 1); + irq_set_noprobe(irq); + + if (chip->irq.num_parents == 1) + err = irq_set_parent(irq, chip->irq.parents[0]); + else if (chip->irq.map) + err = irq_set_parent(irq, chip->irq.map[hwirq]); + + if (err < 0) + return err; + + /* + * No set-up of the hardware will happen if IRQ_TYPE_NONE + * is passed as default type. + */ + if (chip->irq.default_type != IRQ_TYPE_NONE) + irq_set_irq_type(irq, chip->irq.default_type); + + return 0; +} +EXPORT_SYMBOL_GPL(gpiochip_irq_map); + +void gpiochip_irq_unmap(struct irq_domain *d, unsigned int irq) +{ + struct gpio_chip *chip = d->host_data; + + if (chip->irq.threaded) + irq_set_nested_thread(irq, 0); + irq_set_chip_and_handler(irq, NULL, NULL); + irq_set_chip_data(irq, NULL); +} +EXPORT_SYMBOL_GPL(gpiochip_irq_unmap); + +static const struct irq_domain_ops gpiochip_domain_ops = { + .map = gpiochip_irq_map, + .unmap = gpiochip_irq_unmap, + /* Virtually all GPIO irqchips are twocell:ed */ + .xlate = irq_domain_xlate_twocell, +}; + +static int gpiochip_irq_reqres(struct irq_data *d) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(d); + int ret; + + if (!try_module_get(chip->gpiodev->owner)) + return -ENODEV; + + ret = gpiochip_lock_as_irq(chip, d->hwirq); + if (ret) { + chip_err(chip, + "unable to lock HW IRQ %lu for IRQ\n", + d->hwirq); + module_put(chip->gpiodev->owner); + return ret; + } + return 0; +} + +static void gpiochip_irq_relres(struct irq_data *d) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(d); + + gpiochip_unlock_as_irq(chip, d->hwirq); + module_put(chip->gpiodev->owner); +} + +static int gpiochip_to_irq(struct gpio_chip *chip, unsigned offset) +{ + if (!gpiochip_irqchip_irq_valid(chip, offset)) + return -ENXIO; + + return irq_create_mapping(chip->irq.domain, offset); +} + +/** + * gpiochip_add_irqchip() - adds an IRQ chip to a GPIO chip + * @gpiochip: the GPIO chip to add the IRQ chip to + * @lock_key: lockdep class for IRQ lock + * @request_key: lockdep class for IRQ request + */ +static int gpiochip_add_irqchip(struct gpio_chip *gpiochip, + struct lock_class_key *lock_key, + struct lock_class_key *request_key) +{ + struct irq_chip *irqchip = gpiochip->irq.chip; + const struct irq_domain_ops *ops; + struct device_node *np; + unsigned int type; + unsigned int i; + + if (!irqchip) + return 0; + + if (gpiochip->irq.parent_handler && gpiochip->can_sleep) { + chip_err(gpiochip, "you cannot have chained interrupts on a chip that may sleep\n"); + return -EINVAL; + } + + np = gpiochip->gpiodev->dev.of_node; + type = gpiochip->irq.default_type; + + /* + * Specifying a default trigger is a terrible idea if DT or ACPI is + * used to configure the interrupts, as you may end up with + * conflicting triggers. Tell the user, and reset to NONE. + */ + if (WARN(np && type != IRQ_TYPE_NONE, + "%s: Ignoring %u default trigger\n", np->full_name, type)) + type = IRQ_TYPE_NONE; + + if (has_acpi_companion(gpiochip->parent) && type != IRQ_TYPE_NONE) { + acpi_handle_warn(ACPI_HANDLE(gpiochip->parent), + "Ignoring %u default trigger\n", type); + type = IRQ_TYPE_NONE; + } + + gpiochip->to_irq = gpiochip_to_irq; + gpiochip->irq.default_type = type; + gpiochip->irq.lock_key = lock_key; + gpiochip->irq.request_key = request_key; + + if (gpiochip->irq.domain_ops) + ops = gpiochip->irq.domain_ops; + else + ops = &gpiochip_domain_ops; + + gpiochip->irq.domain = irq_domain_add_simple(np, gpiochip->ngpio, + gpiochip->irq.first, + ops, gpiochip); + if (!gpiochip->irq.domain) + return -EINVAL; + + /* + * It is possible for a driver to override this, but only if the + * alternative functions are both implemented. + */ + if (!irqchip->irq_request_resources && + !irqchip->irq_release_resources) { + irqchip->irq_request_resources = gpiochip_irq_reqres; + irqchip->irq_release_resources = gpiochip_irq_relres; + } + + if (gpiochip->irq.parent_handler) { + void *data = gpiochip->irq.parent_handler_data ?: gpiochip; + + for (i = 0; i < gpiochip->irq.num_parents; i++) { + /* + * The parent IRQ chip is already using the chip_data + * for this IRQ chip, so our callbacks simply use the + * handler_data. + */ + irq_set_chained_handler_and_data(gpiochip->irq.parents[i], + gpiochip->irq.parent_handler, + data); + } + } + + acpi_gpiochip_request_interrupts(gpiochip); + + return 0; +} + +/** + * gpiochip_irqchip_remove() - removes an irqchip added to a gpiochip + * @gpiochip: the gpiochip to remove the irqchip from + * + * This is called only from gpiochip_remove() + */ +static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip) +{ + unsigned int offset; + + acpi_gpiochip_free_interrupts(gpiochip); + + if (gpiochip->irq.chip && gpiochip->irq.parent_handler) { + struct gpio_irq_chip *irq = &gpiochip->irq; + unsigned int i; + + for (i = 0; i < irq->num_parents; i++) + irq_set_chained_handler_and_data(irq->parents[i], + NULL, NULL); + } + + /* Remove all IRQ mappings and delete the domain */ + if (gpiochip->irq.domain) { + unsigned int irq; + + for (offset = 0; offset < gpiochip->ngpio; offset++) { + if (!gpiochip_irqchip_irq_valid(gpiochip, offset)) + continue; + + irq = irq_find_mapping(gpiochip->irq.domain, offset); + irq_dispose_mapping(irq); + } + + irq_domain_remove(gpiochip->irq.domain); + } + + if (gpiochip->irq.chip) { + gpiochip->irq.chip->irq_request_resources = NULL; + gpiochip->irq.chip->irq_release_resources = NULL; + gpiochip->irq.chip = NULL; + } + + gpiochip_irqchip_free_valid_mask(gpiochip); +} + +/** + * gpiochip_irqchip_add_key() - adds an irqchip to a gpiochip + * @gpiochip: the gpiochip to add the irqchip to + * @irqchip: the irqchip to add to the gpiochip + * @first_irq: if not dynamically assigned, the base (first) IRQ to + * allocate gpiochip irqs from + * @handler: the irq handler to use (often a predefined irq core function) + * @type: the default type for IRQs on this irqchip, pass IRQ_TYPE_NONE + * to have the core avoid setting up any default type in the hardware. + * @threaded: whether this irqchip uses a nested thread handler + * @lock_key: lockdep class for IRQ lock + * @request_key: lockdep class for IRQ request + * + * This function closely associates a certain irqchip with a certain + * gpiochip, providing an irq domain to translate the local IRQs to + * global irqs in the gpiolib core, and making sure that the gpiochip + * is passed as chip data to all related functions. Driver callbacks + * need to use gpiochip_get_data() to get their local state containers back + * from the gpiochip passed as chip data. An irqdomain will be stored + * in the gpiochip that shall be used by the driver to handle IRQ number + * translation. The gpiochip will need to be initialized and registered + * before calling this function. + * + * This function will handle two cell:ed simple IRQs and assumes all + * the pins on the gpiochip can generate a unique IRQ. Everything else + * need to be open coded. + */ +int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip, + struct irq_chip *irqchip, + unsigned int first_irq, + irq_flow_handler_t handler, + unsigned int type, + bool threaded, + struct lock_class_key *lock_key, + struct lock_class_key *request_key) +{ + struct device_node *of_node; + + if (!gpiochip || !irqchip) + return -EINVAL; + + if (!gpiochip->parent) { + pr_err("missing gpiochip .dev parent pointer\n"); + return -EINVAL; + } + gpiochip->irq.threaded = threaded; + of_node = gpiochip->parent->of_node; +#ifdef CONFIG_OF_GPIO + /* + * If the gpiochip has an assigned OF node this takes precedence + * FIXME: get rid of this and use gpiochip->parent->of_node + * everywhere + */ + if (gpiochip->of_node) + of_node = gpiochip->of_node; +#endif + /* + * Specifying a default trigger is a terrible idea if DT or ACPI is + * used to configure the interrupts, as you may end-up with + * conflicting triggers. Tell the user, and reset to NONE. + */ + if (WARN(of_node && type != IRQ_TYPE_NONE, + "%pOF: Ignoring %d default trigger\n", of_node, type)) + type = IRQ_TYPE_NONE; + if (has_acpi_companion(gpiochip->parent) && type != IRQ_TYPE_NONE) { + acpi_handle_warn(ACPI_HANDLE(gpiochip->parent), + "Ignoring %d default trigger\n", type); + type = IRQ_TYPE_NONE; + } + + gpiochip->irq.chip = irqchip; + gpiochip->irq.handler = handler; + gpiochip->irq.default_type = type; + gpiochip->to_irq = gpiochip_to_irq; + gpiochip->irq.lock_key = lock_key; + gpiochip->irq.request_key = request_key; + gpiochip->irq.domain = irq_domain_add_simple(of_node, + gpiochip->ngpio, first_irq, + &gpiochip_domain_ops, gpiochip); + if (!gpiochip->irq.domain) { + gpiochip->irq.chip = NULL; + return -EINVAL; + } + + /* + * It is possible for a driver to override this, but only if the + * alternative functions are both implemented. + */ + if (!irqchip->irq_request_resources && + !irqchip->irq_release_resources) { + irqchip->irq_request_resources = gpiochip_irq_reqres; + irqchip->irq_release_resources = gpiochip_irq_relres; + } + + acpi_gpiochip_request_interrupts(gpiochip); + + return 0; +} +EXPORT_SYMBOL_GPL(gpiochip_irqchip_add_key); + +#else /* CONFIG_GPIOLIB_IRQCHIP */ + +static inline int gpiochip_add_irqchip(struct gpio_chip *gpiochip, + struct lock_class_key *lock_key, + struct lock_class_key *request_key) +{ + return 0; +} + +static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip) {} +static inline int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip) +{ + return 0; +} +static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip) +{ } + +#endif /* CONFIG_GPIOLIB_IRQCHIP */ + +/** + * gpiochip_generic_request() - request the gpio function for a pin + * @chip: the gpiochip owning the GPIO + * @offset: the offset of the GPIO to request for GPIO function + */ +int gpiochip_generic_request(struct gpio_chip *chip, unsigned offset) +{ + return pinctrl_gpio_request(chip->gpiodev->base + offset); +} +EXPORT_SYMBOL_GPL(gpiochip_generic_request); + +/** + * gpiochip_generic_free() - free the gpio function from a pin + * @chip: the gpiochip to request the gpio function for + * @offset: the offset of the GPIO to free from GPIO function + */ +void gpiochip_generic_free(struct gpio_chip *chip, unsigned offset) +{ + pinctrl_gpio_free(chip->gpiodev->base + offset); +} +EXPORT_SYMBOL_GPL(gpiochip_generic_free); + +/** + * gpiochip_generic_config() - apply configuration for a pin + * @chip: the gpiochip owning the GPIO + * @offset: the offset of the GPIO to apply the configuration + * @config: the configuration to be applied + */ +int gpiochip_generic_config(struct gpio_chip *chip, unsigned offset, + unsigned long config) +{ + return pinctrl_gpio_set_config(chip->gpiodev->base + offset, config); +} +EXPORT_SYMBOL_GPL(gpiochip_generic_config); + +#ifdef CONFIG_PINCTRL + +/** + * gpiochip_add_pingroup_range() - add a range for GPIO <-> pin mapping + * @chip: the gpiochip to add the range for + * @pctldev: the pin controller to map to + * @gpio_offset: the start offset in the current gpio_chip number space + * @pin_group: name of the pin group inside the pin controller + * + * Calling this function directly from a DeviceTree-supported + * pinctrl driver is DEPRECATED. Please see Section 2.1 of + * Documentation/devicetree/bindings/gpio/gpio.txt on how to + * bind pinctrl and gpio drivers via the "gpio-ranges" property. + */ +int gpiochip_add_pingroup_range(struct gpio_chip *chip, + struct pinctrl_dev *pctldev, + unsigned int gpio_offset, const char *pin_group) +{ + struct gpio_pin_range *pin_range; + struct gpio_device *gdev = chip->gpiodev; + int ret; + + pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL); + if (!pin_range) { + chip_err(chip, "failed to allocate pin ranges\n"); + return -ENOMEM; + } + + /* Use local offset as range ID */ + pin_range->range.id = gpio_offset; + pin_range->range.gc = chip; + pin_range->range.name = chip->label; + pin_range->range.base = gdev->base + gpio_offset; + pin_range->pctldev = pctldev; + + ret = pinctrl_get_group_pins(pctldev, pin_group, + &pin_range->range.pins, + &pin_range->range.npins); + if (ret < 0) { + kfree(pin_range); + return ret; + } + + pinctrl_add_gpio_range(pctldev, &pin_range->range); + + chip_dbg(chip, "created GPIO range %d->%d ==> %s PINGRP %s\n", + gpio_offset, gpio_offset + pin_range->range.npins - 1, + pinctrl_dev_get_devname(pctldev), pin_group); + + list_add_tail(&pin_range->node, &gdev->pin_ranges); + + return 0; +} +EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range); + +/** + * gpiochip_add_pin_range() - add a range for GPIO <-> pin mapping + * @chip: the gpiochip to add the range for + * @pinctl_name: the dev_name() of the pin controller to map to + * @gpio_offset: the start offset in the current gpio_chip number space + * @pin_offset: the start offset in the pin controller number space + * @npins: the number of pins from the offset of each pin space (GPIO and + * pin controller) to accumulate in this range + * + * Returns: + * 0 on success, or a negative error-code on failure. + * + * Calling this function directly from a DeviceTree-supported + * pinctrl driver is DEPRECATED. Please see Section 2.1 of + * Documentation/devicetree/bindings/gpio/gpio.txt on how to + * bind pinctrl and gpio drivers via the "gpio-ranges" property. + */ +int gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, + unsigned int gpio_offset, unsigned int pin_offset, + unsigned int npins) +{ + struct gpio_pin_range *pin_range; + struct gpio_device *gdev = chip->gpiodev; + int ret; + + pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL); + if (!pin_range) { + chip_err(chip, "failed to allocate pin ranges\n"); + return -ENOMEM; + } + + /* Use local offset as range ID */ + pin_range->range.id = gpio_offset; + pin_range->range.gc = chip; + pin_range->range.name = chip->label; + pin_range->range.base = gdev->base + gpio_offset; + pin_range->range.pin_base = pin_offset; + pin_range->range.npins = npins; + pin_range->pctldev = pinctrl_find_and_add_gpio_range(pinctl_name, + &pin_range->range); + if (IS_ERR(pin_range->pctldev)) { + ret = PTR_ERR(pin_range->pctldev); + chip_err(chip, "could not create pin range\n"); + kfree(pin_range); + return ret; + } + chip_dbg(chip, "created GPIO range %d->%d ==> %s PIN %d->%d\n", + gpio_offset, gpio_offset + npins - 1, + pinctl_name, + pin_offset, pin_offset + npins - 1); + + list_add_tail(&pin_range->node, &gdev->pin_ranges); + + return 0; +} +EXPORT_SYMBOL_GPL(gpiochip_add_pin_range); + +/** + * gpiochip_remove_pin_ranges() - remove all the GPIO <-> pin mappings + * @chip: the chip to remove all the mappings for + */ +void gpiochip_remove_pin_ranges(struct gpio_chip *chip) +{ + struct gpio_pin_range *pin_range, *tmp; + struct gpio_device *gdev = chip->gpiodev; + + list_for_each_entry_safe(pin_range, tmp, &gdev->pin_ranges, node) { + list_del(&pin_range->node); + pinctrl_remove_gpio_range(pin_range->pctldev, + &pin_range->range); + kfree(pin_range); + } +} +EXPORT_SYMBOL_GPL(gpiochip_remove_pin_ranges); + +#endif /* CONFIG_PINCTRL */ + +/* These "optional" allocation calls help prevent drivers from stomping + * on each other, and help provide better diagnostics in debugfs. + * They're called even less than the "set direction" calls. + */ +static int gpiod_request_commit(struct gpio_desc *desc, const char *label) +{ + struct gpio_chip *chip = desc->gdev->chip; + int status; + unsigned long flags; + unsigned offset; + + if (label) { + label = kstrdup_const(label, GFP_KERNEL); + if (!label) + return -ENOMEM; + } + + spin_lock_irqsave(&gpio_lock, flags); + + /* NOTE: gpio_request() can be called in early boot, + * before IRQs are enabled, for non-sleeping (SOC) GPIOs. + */ + + if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) { + desc_set_label(desc, label ? : "?"); + status = 0; + } else { + kfree_const(label); + status = -EBUSY; + goto done; + } + + if (chip->request) { + /* chip->request may sleep */ + spin_unlock_irqrestore(&gpio_lock, flags); + offset = gpio_chip_hwgpio(desc); + if (gpiochip_line_is_valid(chip, offset)) + status = chip->request(chip, offset); + else + status = -EINVAL; + spin_lock_irqsave(&gpio_lock, flags); + + if (status < 0) { + desc_set_label(desc, NULL); + kfree_const(label); + clear_bit(FLAG_REQUESTED, &desc->flags); + goto done; + } + } + if (chip->get_direction) { + /* chip->get_direction may sleep */ + spin_unlock_irqrestore(&gpio_lock, flags); + gpiod_get_direction(desc); + spin_lock_irqsave(&gpio_lock, flags); + } +done: + spin_unlock_irqrestore(&gpio_lock, flags); + return status; +} + +/* + * This descriptor validation needs to be inserted verbatim into each + * function taking a descriptor, so we need to use a preprocessor + * macro to avoid endless duplication. If the desc is NULL it is an + * optional GPIO and calls should just bail out. + */ +static int validate_desc(const struct gpio_desc *desc, const char *func) +{ + if (!desc) + return 0; + if (IS_ERR(desc)) { + pr_warn("%s: invalid GPIO (errorpointer)\n", func); + return PTR_ERR(desc); + } + if (!desc->gdev) { + pr_warn("%s: invalid GPIO (no device)\n", func); + return -EINVAL; + } + if (!desc->gdev->chip) { + dev_warn(&desc->gdev->dev, + "%s: backing chip is gone\n", func); + return 0; + } + return 1; +} + +#define VALIDATE_DESC(desc) do { \ + int __valid = validate_desc(desc, __func__); \ + if (__valid <= 0) \ + return __valid; \ + } while (0) + +#define VALIDATE_DESC_VOID(desc) do { \ + int __valid = validate_desc(desc, __func__); \ + if (__valid <= 0) \ + return; \ + } while (0) + +int gpiod_request(struct gpio_desc *desc, const char *label) +{ + int status = -EPROBE_DEFER; + struct gpio_device *gdev; + + VALIDATE_DESC(desc); + gdev = desc->gdev; + + if (try_module_get(gdev->owner)) { + status = gpiod_request_commit(desc, label); + if (status < 0) + module_put(gdev->owner); + else + get_device(&gdev->dev); + } + + if (status) + gpiod_dbg(desc, "%s: status %d\n", __func__, status); + + return status; +} + +static bool gpiod_free_commit(struct gpio_desc *desc) +{ + bool ret = false; + unsigned long flags; + struct gpio_chip *chip; + + might_sleep(); + + gpiod_unexport(desc); + + spin_lock_irqsave(&gpio_lock, flags); + + chip = desc->gdev->chip; + if (chip && test_bit(FLAG_REQUESTED, &desc->flags)) { + if (chip->free) { + spin_unlock_irqrestore(&gpio_lock, flags); + might_sleep_if(chip->can_sleep); + chip->free(chip, gpio_chip_hwgpio(desc)); + spin_lock_irqsave(&gpio_lock, flags); + } + kfree_const(desc->label); + desc_set_label(desc, NULL); + clear_bit(FLAG_ACTIVE_LOW, &desc->flags); + clear_bit(FLAG_REQUESTED, &desc->flags); + clear_bit(FLAG_OPEN_DRAIN, &desc->flags); + clear_bit(FLAG_OPEN_SOURCE, &desc->flags); + clear_bit(FLAG_IS_HOGGED, &desc->flags); + ret = true; + } + + spin_unlock_irqrestore(&gpio_lock, flags); + return ret; +} + +void gpiod_free(struct gpio_desc *desc) +{ + if (desc && desc->gdev && gpiod_free_commit(desc)) { + module_put(desc->gdev->owner); + put_device(&desc->gdev->dev); + } else { + WARN_ON(extra_checks); + } +} + +/** + * gpiochip_is_requested - return string iff signal was requested + * @chip: controller managing the signal + * @offset: of signal within controller's 0..(ngpio - 1) range + * + * Returns NULL if the GPIO is not currently requested, else a string. + * The string returned is the label passed to gpio_request(); if none has been + * passed it is a meaningless, non-NULL constant. + * + * This function is for use by GPIO controller drivers. The label can + * help with diagnostics, and knowing that the signal is used as a GPIO + * can help avoid accidentally multiplexing it to another controller. + */ +const char *gpiochip_is_requested(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_desc *desc; + + if (offset >= chip->ngpio) + return NULL; + + desc = &chip->gpiodev->descs[offset]; + + if (test_bit(FLAG_REQUESTED, &desc->flags) == 0) + return NULL; + return desc->label; +} +EXPORT_SYMBOL_GPL(gpiochip_is_requested); + +/** + * gpiochip_request_own_desc - Allow GPIO chip to request its own descriptor + * @chip: GPIO chip + * @hwnum: hardware number of the GPIO for which to request the descriptor + * @label: label for the GPIO + * + * Function allows GPIO chip drivers to request and use their own GPIO + * descriptors via gpiolib API. Difference to gpiod_request() is that this + * function will not increase reference count of the GPIO chip module. This + * allows the GPIO chip module to be unloaded as needed (we assume that the + * GPIO chip driver handles freeing the GPIOs it has requested). + * + * Returns: + * A pointer to the GPIO descriptor, or an ERR_PTR()-encoded negative error + * code on failure. + */ +struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip, u16 hwnum, + const char *label) +{ + struct gpio_desc *desc = gpiochip_get_desc(chip, hwnum); + int err; + + if (IS_ERR(desc)) { + chip_err(chip, "failed to get GPIO descriptor\n"); + return desc; + } + + err = gpiod_request_commit(desc, label); + if (err < 0) + return ERR_PTR(err); + + return desc; +} +EXPORT_SYMBOL_GPL(gpiochip_request_own_desc); + +/** + * gpiochip_free_own_desc - Free GPIO requested by the chip driver + * @desc: GPIO descriptor to free + * + * Function frees the given GPIO requested previously with + * gpiochip_request_own_desc(). + */ +void gpiochip_free_own_desc(struct gpio_desc *desc) +{ + if (desc) + gpiod_free_commit(desc); +} +EXPORT_SYMBOL_GPL(gpiochip_free_own_desc); + +/* + * Drivers MUST set GPIO direction before making get/set calls. In + * some cases this is done in early boot, before IRQs are enabled. + * + * As a rule these aren't called more than once (except for drivers + * using the open-drain emulation idiom) so these are natural places + * to accumulate extra debugging checks. Note that we can't (yet) + * rely on gpio_request() having been called beforehand. + */ + +/** + * gpiod_direction_input - set the GPIO direction to input + * @desc: GPIO to set to input + * + * Set the direction of the passed GPIO to input, such as gpiod_get_value() can + * be called safely on it. + * + * Return 0 in case of success, else an error code. + */ +int gpiod_direction_input(struct gpio_desc *desc) +{ + struct gpio_chip *chip; + int status = 0; + + VALIDATE_DESC(desc); + chip = desc->gdev->chip; + + if (!chip->get && chip->direction_input) { + gpiod_warn(desc, + "%s: missing get() and direction_input() operations\n", + __func__); + return -EIO; + } + + if (chip->direction_input) { + status = chip->direction_input(chip, gpio_chip_hwgpio(desc)); + } else if (chip->get_direction && + (chip->get_direction(chip, gpio_chip_hwgpio(desc)) != 1)) { + gpiod_warn(desc, + "%s: missing direction_input() operation\n", + __func__); + return -EIO; + } + if (status == 0) + clear_bit(FLAG_IS_OUT, &desc->flags); + + trace_gpio_direction(desc_to_gpio(desc), 1, status); + + return status; +} +EXPORT_SYMBOL_GPL(gpiod_direction_input); + +static int gpio_set_drive_single_ended(struct gpio_chip *gc, unsigned offset, + enum pin_config_param mode) +{ + unsigned long config = { PIN_CONF_PACKED(mode, 0) }; + + return gc->set_config ? gc->set_config(gc, offset, config) : -ENOTSUPP; +} + +static int gpiod_direction_output_raw_commit(struct gpio_desc *desc, int value) +{ + struct gpio_chip *gc = desc->gdev->chip; + int val = !!value; + int ret = 0; + + if (!gc->set && !gc->direction_output) { + gpiod_warn(desc, + "%s: missing set() and direction_output() operations\n", + __func__); + return -EIO; + } + + if (gc->direction_output) { + ret = gc->direction_output(gc, gpio_chip_hwgpio(desc), val); + } else { + if (gc->get_direction && + gc->get_direction(gc, gpio_chip_hwgpio(desc))) { + gpiod_warn(desc, + "%s: missing direction_output() operation\n", + __func__); + return -EIO; + } + gc->set(gc, gpio_chip_hwgpio(desc), val); + } + + if (!ret) + set_bit(FLAG_IS_OUT, &desc->flags); + trace_gpio_value(desc_to_gpio(desc), 0, val); + trace_gpio_direction(desc_to_gpio(desc), 0, ret); + return ret; +} + +/** + * gpiod_direction_output_raw - set the GPIO direction to output + * @desc: GPIO to set to output + * @value: initial output value of the GPIO + * + * Set the direction of the passed GPIO to output, such as gpiod_set_value() can + * be called safely on it. The initial value of the output must be specified + * as raw value on the physical line without regard for the ACTIVE_LOW status. + * + * Return 0 in case of success, else an error code. + */ +int gpiod_direction_output_raw(struct gpio_desc *desc, int value) +{ + VALIDATE_DESC(desc); + return gpiod_direction_output_raw_commit(desc, value); +} +EXPORT_SYMBOL_GPL(gpiod_direction_output_raw); + +/** + * gpiod_direction_output - set the GPIO direction to output + * @desc: GPIO to set to output + * @value: initial output value of the GPIO + * + * Set the direction of the passed GPIO to output, such as gpiod_set_value() can + * be called safely on it. The initial value of the output must be specified + * as the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into + * account. + * + * Return 0 in case of success, else an error code. + */ +int gpiod_direction_output(struct gpio_desc *desc, int value) +{ + struct gpio_chip *gc; + int ret; + + VALIDATE_DESC(desc); + if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) + value = !value; + else + value = !!value; + + /* GPIOs used for IRQs shall not be set as output */ + if (test_bit(FLAG_USED_AS_IRQ, &desc->flags)) { + gpiod_err(desc, + "%s: tried to set a GPIO tied to an IRQ as output\n", + __func__); + return -EIO; + } + + gc = desc->gdev->chip; + if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) { + /* First see if we can enable open drain in hardware */ + ret = gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc), + PIN_CONFIG_DRIVE_OPEN_DRAIN); + if (!ret) + goto set_output_value; + /* Emulate open drain by not actively driving the line high */ + if (value) { + ret = gpiod_direction_input(desc); + goto set_output_flag; + } + } + else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) { + ret = gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc), + PIN_CONFIG_DRIVE_OPEN_SOURCE); + if (!ret) + goto set_output_value; + /* Emulate open source by not actively driving the line low */ + if (!value) { + ret = gpiod_direction_input(desc); + goto set_output_flag; + } + } else { + gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc), + PIN_CONFIG_DRIVE_PUSH_PULL); + } + +set_output_value: + return gpiod_direction_output_raw_commit(desc, value); + +set_output_flag: + /* + * When emulating open-source or open-drain functionalities by not + * actively driving the line (setting mode to input) we still need to + * set the IS_OUT flag or otherwise we won't be able to set the line + * value anymore. + */ + if (ret == 0) + set_bit(FLAG_IS_OUT, &desc->flags); + return ret; +} +EXPORT_SYMBOL_GPL(gpiod_direction_output); + +/** + * gpiod_set_debounce - sets @debounce time for a GPIO + * @desc: descriptor of the GPIO for which to set debounce time + * @debounce: debounce time in microseconds + * + * Returns: + * 0 on success, %-ENOTSUPP if the controller doesn't support setting the + * debounce time. + */ +int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce) +{ + struct gpio_chip *chip; + unsigned long config; + + VALIDATE_DESC(desc); + chip = desc->gdev->chip; + if (!chip->set || !chip->set_config) { + gpiod_dbg(desc, + "%s: missing set() or set_config() operations\n", + __func__); + return -ENOTSUPP; + } + + config = pinconf_to_config_packed(PIN_CONFIG_INPUT_DEBOUNCE, debounce); + return chip->set_config(chip, gpio_chip_hwgpio(desc), config); +} +EXPORT_SYMBOL_GPL(gpiod_set_debounce); + +/** + * gpiod_set_transitory - Lose or retain GPIO state on suspend or reset + * @desc: descriptor of the GPIO for which to configure persistence + * @transitory: True to lose state on suspend or reset, false for persistence + * + * Returns: + * 0 on success, otherwise a negative error code. + */ +int gpiod_set_transitory(struct gpio_desc *desc, bool transitory) +{ + struct gpio_chip *chip; + unsigned long packed; + int gpio; + int rc; + + VALIDATE_DESC(desc); + /* + * Handle FLAG_TRANSITORY first, enabling queries to gpiolib for + * persistence state. + */ + if (transitory) + set_bit(FLAG_TRANSITORY, &desc->flags); + else + clear_bit(FLAG_TRANSITORY, &desc->flags); + + /* If the driver supports it, set the persistence state now */ + chip = desc->gdev->chip; + if (!chip->set_config) + return 0; + + packed = pinconf_to_config_packed(PIN_CONFIG_PERSIST_STATE, + !transitory); + gpio = gpio_chip_hwgpio(desc); + rc = chip->set_config(chip, gpio, packed); + if (rc == -ENOTSUPP) { + dev_dbg(&desc->gdev->dev, "Persistence not supported for GPIO %d\n", + gpio); + return 0; + } + + return rc; +} +EXPORT_SYMBOL_GPL(gpiod_set_transitory); + +/** + * gpiod_is_active_low - test whether a GPIO is active-low or not + * @desc: the gpio descriptor to test + * + * Returns 1 if the GPIO is active-low, 0 otherwise. + */ +int gpiod_is_active_low(const struct gpio_desc *desc) +{ + VALIDATE_DESC(desc); + return test_bit(FLAG_ACTIVE_LOW, &desc->flags); +} +EXPORT_SYMBOL_GPL(gpiod_is_active_low); + +/* I/O calls are only valid after configuration completed; the relevant + * "is this a valid GPIO" error checks should already have been done. + * + * "Get" operations are often inlinable as reading a pin value register, + * and masking the relevant bit in that register. + * + * When "set" operations are inlinable, they involve writing that mask to + * one register to set a low value, or a different register to set it high. + * Otherwise locking is needed, so there may be little value to inlining. + * + *------------------------------------------------------------------------ + * + * IMPORTANT!!! The hot paths -- get/set value -- assume that callers + * have requested the GPIO. That can include implicit requesting by + * a direction setting call. Marking a gpio as requested locks its chip + * in memory, guaranteeing that these table lookups need no more locking + * and that gpiochip_remove() will fail. + * + * REVISIT when debugging, consider adding some instrumentation to ensure + * that the GPIO was actually requested. + */ + +static int gpiod_get_raw_value_commit(const struct gpio_desc *desc) +{ + struct gpio_chip *chip; + int offset; + int value; + + chip = desc->gdev->chip; + offset = gpio_chip_hwgpio(desc); + value = chip->get ? chip->get(chip, offset) : -EIO; + value = value < 0 ? value : !!value; + trace_gpio_value(desc_to_gpio(desc), 1, value); + return value; +} + +static int gpio_chip_get_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + if (chip->get_multiple) { + return chip->get_multiple(chip, mask, bits); + } else if (chip->get) { + int i, value; + + for_each_set_bit(i, mask, chip->ngpio) { + value = chip->get(chip, i); + if (value < 0) + return value; + __assign_bit(i, bits, value); + } + return 0; + } + return -EIO; +} + +int gpiod_get_array_value_complex(bool raw, bool can_sleep, + unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array) +{ + int i = 0; + + while (i < array_size) { + struct gpio_chip *chip = desc_array[i]->gdev->chip; + unsigned long fastpath[2 * BITS_TO_LONGS(FASTPATH_NGPIO)]; + unsigned long *mask, *bits; + int first, j, ret; + + if (likely(chip->ngpio <= FASTPATH_NGPIO)) { + mask = fastpath; + } else { + mask = kmalloc_array(2 * BITS_TO_LONGS(chip->ngpio), + sizeof(*mask), + can_sleep ? GFP_KERNEL : GFP_ATOMIC); + if (!mask) + return -ENOMEM; + } + + bits = mask + BITS_TO_LONGS(chip->ngpio); + bitmap_zero(mask, chip->ngpio); + + if (!can_sleep) + WARN_ON(chip->can_sleep); + + /* collect all inputs belonging to the same chip */ + first = i; + do { + const struct gpio_desc *desc = desc_array[i]; + int hwgpio = gpio_chip_hwgpio(desc); + + __set_bit(hwgpio, mask); + i++; + } while ((i < array_size) && + (desc_array[i]->gdev->chip == chip)); + + ret = gpio_chip_get_multiple(chip, mask, bits); + if (ret) { + if (mask != fastpath) + kfree(mask); + return ret; + } + + for (j = first; j < i; j++) { + const struct gpio_desc *desc = desc_array[j]; + int hwgpio = gpio_chip_hwgpio(desc); + int value = test_bit(hwgpio, bits); + + if (!raw && test_bit(FLAG_ACTIVE_LOW, &desc->flags)) + value = !value; + value_array[j] = value; + trace_gpio_value(desc_to_gpio(desc), 1, value); + } + + if (mask != fastpath) + kfree(mask); + } + return 0; +} + +/** + * gpiod_get_raw_value() - return a gpio's raw value + * @desc: gpio whose value will be returned + * + * Return the GPIO's raw value, i.e. the value of the physical line disregarding + * its ACTIVE_LOW status, or negative errno on failure. + * + * This function should be called from contexts where we cannot sleep, and will + * complain if the GPIO chip functions potentially sleep. + */ +int gpiod_get_raw_value(const struct gpio_desc *desc) +{ + VALIDATE_DESC(desc); + /* Should be using gpiod_get_raw_value_cansleep() */ + WARN_ON(desc->gdev->chip->can_sleep); + return gpiod_get_raw_value_commit(desc); +} +EXPORT_SYMBOL_GPL(gpiod_get_raw_value); + +/** + * gpiod_get_value() - return a gpio's value + * @desc: gpio whose value will be returned + * + * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into + * account, or negative errno on failure. + * + * This function should be called from contexts where we cannot sleep, and will + * complain if the GPIO chip functions potentially sleep. + */ +int gpiod_get_value(const struct gpio_desc *desc) +{ + int value; + + VALIDATE_DESC(desc); + /* Should be using gpiod_get_value_cansleep() */ + WARN_ON(desc->gdev->chip->can_sleep); + + value = gpiod_get_raw_value_commit(desc); + if (value < 0) + return value; + + if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) + value = !value; + + return value; +} +EXPORT_SYMBOL_GPL(gpiod_get_value); + +/** + * gpiod_get_raw_array_value() - read raw values from an array of GPIOs + * @array_size: number of elements in the descriptor / value arrays + * @desc_array: array of GPIO descriptors whose values will be read + * @value_array: array to store the read values + * + * Read the raw values of the GPIOs, i.e. the values of the physical lines + * without regard for their ACTIVE_LOW status. Return 0 in case of success, + * else an error code. + * + * This function should be called from contexts where we cannot sleep, + * and it will complain if the GPIO chip functions potentially sleep. + */ +int gpiod_get_raw_array_value(unsigned int array_size, + struct gpio_desc **desc_array, int *value_array) +{ + if (!desc_array) + return -EINVAL; + return gpiod_get_array_value_complex(true, false, array_size, + desc_array, value_array); +} +EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value); + +/** + * gpiod_get_array_value() - read values from an array of GPIOs + * @array_size: number of elements in the descriptor / value arrays + * @desc_array: array of GPIO descriptors whose values will be read + * @value_array: array to store the read values + * + * Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status + * into account. Return 0 in case of success, else an error code. + * + * This function should be called from contexts where we cannot sleep, + * and it will complain if the GPIO chip functions potentially sleep. + */ +int gpiod_get_array_value(unsigned int array_size, + struct gpio_desc **desc_array, int *value_array) +{ + if (!desc_array) + return -EINVAL; + return gpiod_get_array_value_complex(false, false, array_size, + desc_array, value_array); +} +EXPORT_SYMBOL_GPL(gpiod_get_array_value); + +/* + * gpio_set_open_drain_value_commit() - Set the open drain gpio's value. + * @desc: gpio descriptor whose state need to be set. + * @value: Non-zero for setting it HIGH otherwise it will set to LOW. + */ +static void gpio_set_open_drain_value_commit(struct gpio_desc *desc, bool value) +{ + int err = 0; + struct gpio_chip *chip = desc->gdev->chip; + int offset = gpio_chip_hwgpio(desc); + + if (value) { + err = chip->direction_input(chip, offset); + } else { + err = chip->direction_output(chip, offset, 0); + if (!err) + set_bit(FLAG_IS_OUT, &desc->flags); + } + trace_gpio_direction(desc_to_gpio(desc), value, err); + if (err < 0) + gpiod_err(desc, + "%s: Error in set_value for open drain err %d\n", + __func__, err); +} + +/* + * _gpio_set_open_source_value() - Set the open source gpio's value. + * @desc: gpio descriptor whose state need to be set. + * @value: Non-zero for setting it HIGH otherwise it will set to LOW. + */ +static void gpio_set_open_source_value_commit(struct gpio_desc *desc, bool value) +{ + int err = 0; + struct gpio_chip *chip = desc->gdev->chip; + int offset = gpio_chip_hwgpio(desc); + + if (value) { + err = chip->direction_output(chip, offset, 1); + if (!err) + set_bit(FLAG_IS_OUT, &desc->flags); + } else { + err = chip->direction_input(chip, offset); + } + trace_gpio_direction(desc_to_gpio(desc), !value, err); + if (err < 0) + gpiod_err(desc, + "%s: Error in set_value for open source err %d\n", + __func__, err); +} + +static void gpiod_set_raw_value_commit(struct gpio_desc *desc, bool value) +{ + struct gpio_chip *chip; + + chip = desc->gdev->chip; + trace_gpio_value(desc_to_gpio(desc), 0, value); + chip->set(chip, gpio_chip_hwgpio(desc), value); +} + +/* + * set multiple outputs on the same chip; + * use the chip's set_multiple function if available; + * otherwise set the outputs sequentially; + * @mask: bit mask array; one bit per output; BITS_PER_LONG bits per word + * defines which outputs are to be changed + * @bits: bit value array; one bit per output; BITS_PER_LONG bits per word + * defines the values the outputs specified by mask are to be set to + */ +static void gpio_chip_set_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + if (chip->set_multiple) { + chip->set_multiple(chip, mask, bits); + } else { + unsigned int i; + + /* set outputs if the corresponding mask bit is set */ + for_each_set_bit(i, mask, chip->ngpio) + chip->set(chip, i, test_bit(i, bits)); + } +} + +int gpiod_set_array_value_complex(bool raw, bool can_sleep, + unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array) +{ + int i = 0; + + while (i < array_size) { + struct gpio_chip *chip = desc_array[i]->gdev->chip; + unsigned long fastpath[2 * BITS_TO_LONGS(FASTPATH_NGPIO)]; + unsigned long *mask, *bits; + int count = 0; + + if (likely(chip->ngpio <= FASTPATH_NGPIO)) { + mask = fastpath; + } else { + mask = kmalloc_array(2 * BITS_TO_LONGS(chip->ngpio), + sizeof(*mask), + can_sleep ? GFP_KERNEL : GFP_ATOMIC); + if (!mask) + return -ENOMEM; + } + + bits = mask + BITS_TO_LONGS(chip->ngpio); + bitmap_zero(mask, chip->ngpio); + + if (!can_sleep) + WARN_ON(chip->can_sleep); + + do { + struct gpio_desc *desc = desc_array[i]; + int hwgpio = gpio_chip_hwgpio(desc); + int value = value_array[i]; + + if (!raw && test_bit(FLAG_ACTIVE_LOW, &desc->flags)) + value = !value; + trace_gpio_value(desc_to_gpio(desc), 0, value); + /* + * collect all normal outputs belonging to the same chip + * open drain and open source outputs are set individually + */ + if (test_bit(FLAG_OPEN_DRAIN, &desc->flags) && !raw) { + gpio_set_open_drain_value_commit(desc, value); + } else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags) && !raw) { + gpio_set_open_source_value_commit(desc, value); + } else { + __set_bit(hwgpio, mask); + if (value) + __set_bit(hwgpio, bits); + else + __clear_bit(hwgpio, bits); + count++; + } + i++; + } while ((i < array_size) && + (desc_array[i]->gdev->chip == chip)); + /* push collected bits to outputs */ + if (count != 0) + gpio_chip_set_multiple(chip, mask, bits); + + if (mask != fastpath) + kfree(mask); + } + return 0; +} + +/** + * gpiod_set_raw_value() - assign a gpio's raw value + * @desc: gpio whose value will be assigned + * @value: value to assign + * + * Set the raw value of the GPIO, i.e. the value of its physical line without + * regard for its ACTIVE_LOW status. + * + * This function should be called from contexts where we cannot sleep, and will + * complain if the GPIO chip functions potentially sleep. + */ +void gpiod_set_raw_value(struct gpio_desc *desc, int value) +{ + VALIDATE_DESC_VOID(desc); + /* Should be using gpiod_set_raw_value_cansleep() */ + WARN_ON(desc->gdev->chip->can_sleep); + gpiod_set_raw_value_commit(desc, value); +} +EXPORT_SYMBOL_GPL(gpiod_set_raw_value); + +/** + * gpiod_set_value_nocheck() - set a GPIO line value without checking + * @desc: the descriptor to set the value on + * @value: value to set + * + * This sets the value of a GPIO line backing a descriptor, applying + * different semantic quirks like active low and open drain/source + * handling. + */ +static void gpiod_set_value_nocheck(struct gpio_desc *desc, int value) +{ + if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) + value = !value; + if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) + gpio_set_open_drain_value_commit(desc, value); + else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) + gpio_set_open_source_value_commit(desc, value); + else + gpiod_set_raw_value_commit(desc, value); +} + +/** + * gpiod_set_value() - assign a gpio's value + * @desc: gpio whose value will be assigned + * @value: value to assign + * + * Set the logical value of the GPIO, i.e. taking its ACTIVE_LOW, + * OPEN_DRAIN and OPEN_SOURCE flags into account. + * + * This function should be called from contexts where we cannot sleep, and will + * complain if the GPIO chip functions potentially sleep. + */ +void gpiod_set_value(struct gpio_desc *desc, int value) +{ + VALIDATE_DESC_VOID(desc); + /* Should be using gpiod_set_value_cansleep() */ + WARN_ON(desc->gdev->chip->can_sleep); + gpiod_set_value_nocheck(desc, value); +} +EXPORT_SYMBOL_GPL(gpiod_set_value); + +/** + * gpiod_set_raw_array_value() - assign values to an array of GPIOs + * @array_size: number of elements in the descriptor / value arrays + * @desc_array: array of GPIO descriptors whose values will be assigned + * @value_array: array of values to assign + * + * Set the raw values of the GPIOs, i.e. the values of the physical lines + * without regard for their ACTIVE_LOW status. + * + * This function should be called from contexts where we cannot sleep, and will + * complain if the GPIO chip functions potentially sleep. + */ +int gpiod_set_raw_array_value(unsigned int array_size, + struct gpio_desc **desc_array, int *value_array) +{ + if (!desc_array) + return -EINVAL; + return gpiod_set_array_value_complex(true, false, array_size, + desc_array, value_array); +} +EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value); + +/** + * gpiod_set_array_value() - assign values to an array of GPIOs + * @array_size: number of elements in the descriptor / value arrays + * @desc_array: array of GPIO descriptors whose values will be assigned + * @value_array: array of values to assign + * + * Set the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status + * into account. + * + * This function should be called from contexts where we cannot sleep, and will + * complain if the GPIO chip functions potentially sleep. + */ +void gpiod_set_array_value(unsigned int array_size, + struct gpio_desc **desc_array, int *value_array) +{ + if (!desc_array) + return; + gpiod_set_array_value_complex(false, false, array_size, desc_array, + value_array); +} +EXPORT_SYMBOL_GPL(gpiod_set_array_value); + +/** + * gpiod_cansleep() - report whether gpio value access may sleep + * @desc: gpio to check + * + */ +int gpiod_cansleep(const struct gpio_desc *desc) +{ + VALIDATE_DESC(desc); + return desc->gdev->chip->can_sleep; +} +EXPORT_SYMBOL_GPL(gpiod_cansleep); + +/** + * gpiod_set_consumer_name() - set the consumer name for the descriptor + * @desc: gpio to set the consumer name on + * @name: the new consumer name + */ +int gpiod_set_consumer_name(struct gpio_desc *desc, const char *name) +{ + VALIDATE_DESC(desc); + if (name) { + name = kstrdup_const(name, GFP_KERNEL); + if (!name) + return -ENOMEM; + } + + kfree_const(desc->label); + desc_set_label(desc, name); + + return 0; +} +EXPORT_SYMBOL_GPL(gpiod_set_consumer_name); + +/** + * gpiod_to_irq() - return the IRQ corresponding to a GPIO + * @desc: gpio whose IRQ will be returned (already requested) + * + * Return the IRQ corresponding to the passed GPIO, or an error code in case of + * error. + */ +int gpiod_to_irq(const struct gpio_desc *desc) +{ + struct gpio_chip *chip; + int offset; + + /* + * Cannot VALIDATE_DESC() here as gpiod_to_irq() consumer semantics + * requires this function to not return zero on an invalid descriptor + * but rather a negative error number. + */ + if (!desc || IS_ERR(desc) || !desc->gdev || !desc->gdev->chip) + return -EINVAL; + + chip = desc->gdev->chip; + offset = gpio_chip_hwgpio(desc); + if (chip->to_irq) { + int retirq = chip->to_irq(chip, offset); + + /* Zero means NO_IRQ */ + if (!retirq) + return -ENXIO; + + return retirq; + } + return -ENXIO; +} +EXPORT_SYMBOL_GPL(gpiod_to_irq); + +/** + * gpiochip_lock_as_irq() - lock a GPIO to be used as IRQ + * @chip: the chip the GPIO to lock belongs to + * @offset: the offset of the GPIO to lock as IRQ + * + * This is used directly by GPIO drivers that want to lock down + * a certain GPIO line to be used for IRQs. + */ +int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset) +{ + struct gpio_desc *desc; + + desc = gpiochip_get_desc(chip, offset); + if (IS_ERR(desc)) + return PTR_ERR(desc); + + /* + * If it's fast: flush the direction setting if something changed + * behind our back + */ + if (!chip->can_sleep && chip->get_direction) { + int dir = gpiod_get_direction(desc); + + if (dir < 0) { + chip_err(chip, "%s: cannot get GPIO direction\n", + __func__); + return dir; + } + } + + if (test_bit(FLAG_IS_OUT, &desc->flags)) { + chip_err(chip, + "%s: tried to flag a GPIO set as output for IRQ\n", + __func__); + return -EIO; + } + + set_bit(FLAG_USED_AS_IRQ, &desc->flags); + + /* + * If the consumer has not set up a label (such as when the + * IRQ is referenced from .to_irq()) we set up a label here + * so it is clear this is used as an interrupt. + */ + if (!desc->label) + desc_set_label(desc, "interrupt"); + + return 0; +} +EXPORT_SYMBOL_GPL(gpiochip_lock_as_irq); + +/** + * gpiochip_unlock_as_irq() - unlock a GPIO used as IRQ + * @chip: the chip the GPIO to lock belongs to + * @offset: the offset of the GPIO to lock as IRQ + * + * This is used directly by GPIO drivers that want to indicate + * that a certain GPIO is no longer used exclusively for IRQ. + */ +void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset) +{ + struct gpio_desc *desc; + + desc = gpiochip_get_desc(chip, offset); + if (IS_ERR(desc)) + return; + + clear_bit(FLAG_USED_AS_IRQ, &desc->flags); + + /* If we only had this marking, erase it */ + if (desc->label && !strcmp(desc->label, "interrupt")) + desc_set_label(desc, NULL); +} +EXPORT_SYMBOL_GPL(gpiochip_unlock_as_irq); + +bool gpiochip_line_is_irq(struct gpio_chip *chip, unsigned int offset) +{ + if (offset >= chip->ngpio) + return false; + + return test_bit(FLAG_USED_AS_IRQ, &chip->gpiodev->descs[offset].flags); +} +EXPORT_SYMBOL_GPL(gpiochip_line_is_irq); + +bool gpiochip_line_is_open_drain(struct gpio_chip *chip, unsigned int offset) +{ + if (offset >= chip->ngpio) + return false; + + return test_bit(FLAG_OPEN_DRAIN, &chip->gpiodev->descs[offset].flags); +} +EXPORT_SYMBOL_GPL(gpiochip_line_is_open_drain); + +bool gpiochip_line_is_open_source(struct gpio_chip *chip, unsigned int offset) +{ + if (offset >= chip->ngpio) + return false; + + return test_bit(FLAG_OPEN_SOURCE, &chip->gpiodev->descs[offset].flags); +} +EXPORT_SYMBOL_GPL(gpiochip_line_is_open_source); + +bool gpiochip_line_is_persistent(struct gpio_chip *chip, unsigned int offset) +{ + if (offset >= chip->ngpio) + return false; + + return !test_bit(FLAG_TRANSITORY, &chip->gpiodev->descs[offset].flags); +} +EXPORT_SYMBOL_GPL(gpiochip_line_is_persistent); + +/** + * gpiod_get_raw_value_cansleep() - return a gpio's raw value + * @desc: gpio whose value will be returned + * + * Return the GPIO's raw value, i.e. the value of the physical line disregarding + * its ACTIVE_LOW status, or negative errno on failure. + * + * This function is to be called from contexts that can sleep. + */ +int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc) +{ + might_sleep_if(extra_checks); + VALIDATE_DESC(desc); + return gpiod_get_raw_value_commit(desc); +} +EXPORT_SYMBOL_GPL(gpiod_get_raw_value_cansleep); + +/** + * gpiod_get_value_cansleep() - return a gpio's value + * @desc: gpio whose value will be returned + * + * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into + * account, or negative errno on failure. + * + * This function is to be called from contexts that can sleep. + */ +int gpiod_get_value_cansleep(const struct gpio_desc *desc) +{ + int value; + + might_sleep_if(extra_checks); + VALIDATE_DESC(desc); + value = gpiod_get_raw_value_commit(desc); + if (value < 0) + return value; + + if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) + value = !value; + + return value; +} +EXPORT_SYMBOL_GPL(gpiod_get_value_cansleep); + +/** + * gpiod_get_raw_array_value_cansleep() - read raw values from an array of GPIOs + * @array_size: number of elements in the descriptor / value arrays + * @desc_array: array of GPIO descriptors whose values will be read + * @value_array: array to store the read values + * + * Read the raw values of the GPIOs, i.e. the values of the physical lines + * without regard for their ACTIVE_LOW status. Return 0 in case of success, + * else an error code. + * + * This function is to be called from contexts that can sleep. + */ +int gpiod_get_raw_array_value_cansleep(unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array) +{ + might_sleep_if(extra_checks); + if (!desc_array) + return -EINVAL; + return gpiod_get_array_value_complex(true, true, array_size, + desc_array, value_array); +} +EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value_cansleep); + +/** + * gpiod_get_array_value_cansleep() - read values from an array of GPIOs + * @array_size: number of elements in the descriptor / value arrays + * @desc_array: array of GPIO descriptors whose values will be read + * @value_array: array to store the read values + * + * Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status + * into account. Return 0 in case of success, else an error code. + * + * This function is to be called from contexts that can sleep. + */ +int gpiod_get_array_value_cansleep(unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array) +{ + might_sleep_if(extra_checks); + if (!desc_array) + return -EINVAL; + return gpiod_get_array_value_complex(false, true, array_size, + desc_array, value_array); +} +EXPORT_SYMBOL_GPL(gpiod_get_array_value_cansleep); + +/** + * gpiod_set_raw_value_cansleep() - assign a gpio's raw value + * @desc: gpio whose value will be assigned + * @value: value to assign + * + * Set the raw value of the GPIO, i.e. the value of its physical line without + * regard for its ACTIVE_LOW status. + * + * This function is to be called from contexts that can sleep. + */ +void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value) +{ + might_sleep_if(extra_checks); + VALIDATE_DESC_VOID(desc); + gpiod_set_raw_value_commit(desc, value); +} +EXPORT_SYMBOL_GPL(gpiod_set_raw_value_cansleep); + +/** + * gpiod_set_value_cansleep() - assign a gpio's value + * @desc: gpio whose value will be assigned + * @value: value to assign + * + * Set the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into + * account + * + * This function is to be called from contexts that can sleep. + */ +void gpiod_set_value_cansleep(struct gpio_desc *desc, int value) +{ + might_sleep_if(extra_checks); + VALIDATE_DESC_VOID(desc); + gpiod_set_value_nocheck(desc, value); +} +EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep); + +/** + * gpiod_set_raw_array_value_cansleep() - assign values to an array of GPIOs + * @array_size: number of elements in the descriptor / value arrays + * @desc_array: array of GPIO descriptors whose values will be assigned + * @value_array: array of values to assign + * + * Set the raw values of the GPIOs, i.e. the values of the physical lines + * without regard for their ACTIVE_LOW status. + * + * This function is to be called from contexts that can sleep. + */ +int gpiod_set_raw_array_value_cansleep(unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array) +{ + might_sleep_if(extra_checks); + if (!desc_array) + return -EINVAL; + return gpiod_set_array_value_complex(true, true, array_size, desc_array, + value_array); +} +EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value_cansleep); + +/** + * gpiod_add_lookup_tables() - register GPIO device consumers + * @tables: list of tables of consumers to register + * @n: number of tables in the list + */ +void gpiod_add_lookup_tables(struct gpiod_lookup_table **tables, size_t n) +{ + unsigned int i; + + mutex_lock(&gpio_lookup_lock); + + for (i = 0; i < n; i++) + list_add_tail(&tables[i]->list, &gpio_lookup_list); + + mutex_unlock(&gpio_lookup_lock); +} + +/** + * gpiod_set_array_value_cansleep() - assign values to an array of GPIOs + * @array_size: number of elements in the descriptor / value arrays + * @desc_array: array of GPIO descriptors whose values will be assigned + * @value_array: array of values to assign + * + * Set the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status + * into account. + * + * This function is to be called from contexts that can sleep. + */ +void gpiod_set_array_value_cansleep(unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array) +{ + might_sleep_if(extra_checks); + if (!desc_array) + return; + gpiod_set_array_value_complex(false, true, array_size, desc_array, + value_array); +} +EXPORT_SYMBOL_GPL(gpiod_set_array_value_cansleep); + +/** + * gpiod_add_lookup_table() - register GPIO device consumers + * @table: table of consumers to register + */ +void gpiod_add_lookup_table(struct gpiod_lookup_table *table) +{ + mutex_lock(&gpio_lookup_lock); + + list_add_tail(&table->list, &gpio_lookup_list); + + mutex_unlock(&gpio_lookup_lock); +} +EXPORT_SYMBOL_GPL(gpiod_add_lookup_table); + +/** + * gpiod_remove_lookup_table() - unregister GPIO device consumers + * @table: table of consumers to unregister + */ +void gpiod_remove_lookup_table(struct gpiod_lookup_table *table) +{ + mutex_lock(&gpio_lookup_lock); + + list_del(&table->list); + + mutex_unlock(&gpio_lookup_lock); +} +EXPORT_SYMBOL_GPL(gpiod_remove_lookup_table); + +/** + * gpiod_add_hogs() - register a set of GPIO hogs from machine code + * @hogs: table of gpio hog entries with a zeroed sentinel at the end + */ +void gpiod_add_hogs(struct gpiod_hog *hogs) +{ + struct gpio_chip *chip; + struct gpiod_hog *hog; + + mutex_lock(&gpio_machine_hogs_mutex); + + for (hog = &hogs[0]; hog->chip_label; hog++) { + list_add_tail(&hog->list, &gpio_machine_hogs); + + /* + * The chip may have been registered earlier, so check if it + * exists and, if so, try to hog the line now. + */ + chip = find_chip_by_name(hog->chip_label); + if (chip) + gpiochip_machine_hog(chip, hog); + } + + mutex_unlock(&gpio_machine_hogs_mutex); +} +EXPORT_SYMBOL_GPL(gpiod_add_hogs); + +static struct gpiod_lookup_table *gpiod_find_lookup_table(struct device *dev) +{ + const char *dev_id = dev ? dev_name(dev) : NULL; + struct gpiod_lookup_table *table; + + mutex_lock(&gpio_lookup_lock); + + list_for_each_entry(table, &gpio_lookup_list, list) { + if (table->dev_id && dev_id) { + /* + * Valid strings on both ends, must be identical to have + * a match + */ + if (!strcmp(table->dev_id, dev_id)) + goto found; + } else { + /* + * One of the pointers is NULL, so both must be to have + * a match + */ + if (dev_id == table->dev_id) + goto found; + } + } + table = NULL; + +found: + mutex_unlock(&gpio_lookup_lock); + return table; +} + +static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id, + unsigned int idx, + enum gpio_lookup_flags *flags) +{ + struct gpio_desc *desc = ERR_PTR(-ENOENT); + struct gpiod_lookup_table *table; + struct gpiod_lookup *p; + + table = gpiod_find_lookup_table(dev); + if (!table) + return desc; + + for (p = &table->table[0]; p->chip_label; p++) { + struct gpio_chip *chip; + + /* idx must always match exactly */ + if (p->idx != idx) + continue; + + /* If the lookup entry has a con_id, require exact match */ + if (p->con_id && (!con_id || strcmp(p->con_id, con_id))) + continue; + + chip = find_chip_by_name(p->chip_label); + + if (!chip) { + /* + * As the lookup table indicates a chip with + * p->chip_label should exist, assume it may + * still appear later and let the interested + * consumer be probed again or let the Deferred + * Probe infrastructure handle the error. + */ + dev_warn(dev, "cannot find GPIO chip %s, deferring\n", + p->chip_label); + return ERR_PTR(-EPROBE_DEFER); + } + + if (chip->ngpio <= p->chip_hwnum) { + dev_err(dev, + "requested GPIO %u (%u) is out of range [0..%u] for chip %s\n", + idx, p->chip_hwnum, chip->ngpio - 1, + chip->label); + return ERR_PTR(-EINVAL); + } + + desc = gpiochip_get_desc(chip, p->chip_hwnum); + *flags = p->flags; + + return desc; + } + + return desc; +} + +static int dt_gpio_count(struct device *dev, const char *con_id) +{ + int ret; + char propname[32]; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) { + if (con_id) + snprintf(propname, sizeof(propname), "%s-%s", + con_id, gpio_suffixes[i]); + else + snprintf(propname, sizeof(propname), "%s", + gpio_suffixes[i]); + + ret = of_gpio_named_count(dev->of_node, propname); + if (ret > 0) + break; + } + return ret ? ret : -ENOENT; +} + +static int platform_gpio_count(struct device *dev, const char *con_id) +{ + struct gpiod_lookup_table *table; + struct gpiod_lookup *p; + unsigned int count = 0; + + table = gpiod_find_lookup_table(dev); + if (!table) + return -ENOENT; + + for (p = &table->table[0]; p->chip_label; p++) { + if ((con_id && p->con_id && !strcmp(con_id, p->con_id)) || + (!con_id && !p->con_id)) + count++; + } + if (!count) + return -ENOENT; + + return count; +} + +/** + * gpiod_count - return the number of GPIOs associated with a device / function + * or -ENOENT if no GPIO has been assigned to the requested function + * @dev: GPIO consumer, can be NULL for system-global GPIOs + * @con_id: function within the GPIO consumer + */ +int gpiod_count(struct device *dev, const char *con_id) +{ + int count = -ENOENT; + + if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node) + count = dt_gpio_count(dev, con_id); + else if (IS_ENABLED(CONFIG_ACPI) && dev && ACPI_HANDLE(dev)) + count = acpi_gpio_count(dev, con_id); + + if (count < 0) + count = platform_gpio_count(dev, con_id); + + return count; +} +EXPORT_SYMBOL_GPL(gpiod_count); + +/** + * gpiod_get - obtain a GPIO for a given GPIO function + * @dev: GPIO consumer, can be NULL for system-global GPIOs + * @con_id: function within the GPIO consumer + * @flags: optional GPIO initialization flags + * + * Return the GPIO descriptor corresponding to the function con_id of device + * dev, -ENOENT if no GPIO has been assigned to the requested function, or + * another IS_ERR() code if an error occurred while trying to acquire the GPIO. + */ +struct gpio_desc *__must_check gpiod_get(struct device *dev, const char *con_id, + enum gpiod_flags flags) +{ + return gpiod_get_index(dev, con_id, 0, flags); +} +EXPORT_SYMBOL_GPL(gpiod_get); + +/** + * gpiod_get_optional - obtain an optional GPIO for a given GPIO function + * @dev: GPIO consumer, can be NULL for system-global GPIOs + * @con_id: function within the GPIO consumer + * @flags: optional GPIO initialization flags + * + * This is equivalent to gpiod_get(), except that when no GPIO was assigned to + * the requested function it will return NULL. This is convenient for drivers + * that need to handle optional GPIOs. + */ +struct gpio_desc *__must_check gpiod_get_optional(struct device *dev, + const char *con_id, + enum gpiod_flags flags) +{ + return gpiod_get_index_optional(dev, con_id, 0, flags); +} +EXPORT_SYMBOL_GPL(gpiod_get_optional); + + +/** + * gpiod_configure_flags - helper function to configure a given GPIO + * @desc: gpio whose value will be assigned + * @con_id: function within the GPIO consumer + * @lflags: gpio_lookup_flags - returned from of_find_gpio() or + * of_get_gpio_hog() + * @dflags: gpiod_flags - optional GPIO initialization flags + * + * Return 0 on success, -ENOENT if no GPIO has been assigned to the + * requested function and/or index, or another IS_ERR() code if an error + * occurred while trying to acquire the GPIO. + */ +int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id, + unsigned long lflags, enum gpiod_flags dflags) +{ + int status; + + if (lflags & GPIO_ACTIVE_LOW) + set_bit(FLAG_ACTIVE_LOW, &desc->flags); + + if (lflags & GPIO_OPEN_DRAIN) + set_bit(FLAG_OPEN_DRAIN, &desc->flags); + else if (dflags & GPIOD_FLAGS_BIT_OPEN_DRAIN) { + /* + * This enforces open drain mode from the consumer side. + * This is necessary for some busses like I2C, but the lookup + * should *REALLY* have specified them as open drain in the + * first place, so print a little warning here. + */ + set_bit(FLAG_OPEN_DRAIN, &desc->flags); + gpiod_warn(desc, + "enforced open drain please flag it properly in DT/ACPI DSDT/board file\n"); + } + + if (lflags & GPIO_OPEN_SOURCE) + set_bit(FLAG_OPEN_SOURCE, &desc->flags); + + status = gpiod_set_transitory(desc, (lflags & GPIO_TRANSITORY)); + if (status < 0) + return status; + + /* No particular flag request, return here... */ + if (!(dflags & GPIOD_FLAGS_BIT_DIR_SET)) { + pr_debug("no flags found for %s\n", con_id); + return 0; + } + + /* Process flags */ + if (dflags & GPIOD_FLAGS_BIT_DIR_OUT) + status = gpiod_direction_output(desc, + !!(dflags & GPIOD_FLAGS_BIT_DIR_VAL)); + else + status = gpiod_direction_input(desc); + + return status; +} + +/** + * gpiod_get_index - obtain a GPIO from a multi-index GPIO function + * @dev: GPIO consumer, can be NULL for system-global GPIOs + * @con_id: function within the GPIO consumer + * @idx: index of the GPIO to obtain in the consumer + * @flags: optional GPIO initialization flags + * + * This variant of gpiod_get() allows to access GPIOs other than the first + * defined one for functions that define several GPIOs. + * + * Return a valid GPIO descriptor, -ENOENT if no GPIO has been assigned to the + * requested function and/or index, or another IS_ERR() code if an error + * occurred while trying to acquire the GPIO. + */ +struct gpio_desc *__must_check gpiod_get_index(struct device *dev, + const char *con_id, + unsigned int idx, + enum gpiod_flags flags) +{ + struct gpio_desc *desc = NULL; + int status; + enum gpio_lookup_flags lookupflags = 0; + /* Maybe we have a device name, maybe not */ + const char *devname = dev ? dev_name(dev) : "?"; + + dev_dbg(dev, "GPIO lookup for consumer %s\n", con_id); + + if (dev) { + /* Using device tree? */ + if (IS_ENABLED(CONFIG_OF) && dev->of_node) { + dev_dbg(dev, "using device tree for GPIO lookup\n"); + desc = of_find_gpio(dev, con_id, idx, &lookupflags); + } else if (ACPI_COMPANION(dev)) { + dev_dbg(dev, "using ACPI for GPIO lookup\n"); + desc = acpi_find_gpio(dev, con_id, idx, &flags, &lookupflags); + } + } + + /* + * Either we are not using DT or ACPI, or their lookup did not return + * a result. In that case, use platform lookup as a fallback. + */ + if (!desc || desc == ERR_PTR(-ENOENT)) { + dev_dbg(dev, "using lookup tables for GPIO lookup\n"); + desc = gpiod_find(dev, con_id, idx, &lookupflags); + } + + if (IS_ERR(desc)) { + dev_dbg(dev, "No GPIO consumer %s found\n", con_id); + return desc; + } + + /* + * If a connection label was passed use that, else attempt to use + * the device name as label + */ + status = gpiod_request(desc, con_id ? con_id : devname); + if (status < 0) + return ERR_PTR(status); + + status = gpiod_configure_flags(desc, con_id, lookupflags, flags); + if (status < 0) { + dev_dbg(dev, "setup of GPIO %s failed\n", con_id); + gpiod_put(desc); + return ERR_PTR(status); + } + + return desc; +} +EXPORT_SYMBOL_GPL(gpiod_get_index); + +/** + * gpiod_get_from_of_node() - obtain a GPIO from an OF node + * @node: handle of the OF node + * @propname: name of the DT property representing the GPIO + * @index: index of the GPIO to obtain for the consumer + * @dflags: GPIO initialization flags + * @label: label to attach to the requested GPIO + * + * Returns: + * On successful request the GPIO pin is configured in accordance with + * provided @dflags. If the node does not have the requested GPIO + * property, NULL is returned. + * + * In case of error an ERR_PTR() is returned. + */ +struct gpio_desc *gpiod_get_from_of_node(struct device_node *node, + const char *propname, int index, + enum gpiod_flags dflags, + const char *label) +{ + struct gpio_desc *desc; + unsigned long lflags = 0; + enum of_gpio_flags flags; + bool active_low = false; + bool single_ended = false; + bool open_drain = false; + bool transitory = false; + int ret; + + desc = of_get_named_gpiod_flags(node, propname, + index, &flags); + + if (!desc || IS_ERR(desc)) { + /* If it is not there, just return NULL */ + if (PTR_ERR(desc) == -ENOENT) + return NULL; + return desc; + } + + active_low = flags & OF_GPIO_ACTIVE_LOW; + single_ended = flags & OF_GPIO_SINGLE_ENDED; + open_drain = flags & OF_GPIO_OPEN_DRAIN; + transitory = flags & OF_GPIO_TRANSITORY; + + ret = gpiod_request(desc, label); + if (ret) + return ERR_PTR(ret); + + if (active_low) + lflags |= GPIO_ACTIVE_LOW; + + if (single_ended) { + if (open_drain) + lflags |= GPIO_OPEN_DRAIN; + else + lflags |= GPIO_OPEN_SOURCE; + } + + if (transitory) + lflags |= GPIO_TRANSITORY; + + ret = gpiod_configure_flags(desc, propname, lflags, dflags); + if (ret < 0) { + gpiod_put(desc); + return ERR_PTR(ret); + } + + return desc; +} +EXPORT_SYMBOL(gpiod_get_from_of_node); + +/** + * fwnode_get_named_gpiod - obtain a GPIO from firmware node + * @fwnode: handle of the firmware node + * @propname: name of the firmware property representing the GPIO + * @index: index of the GPIO to obtain for the consumer + * @dflags: GPIO initialization flags + * @label: label to attach to the requested GPIO + * + * This function can be used for drivers that get their configuration + * from opaque firmware. + * + * The function properly finds the corresponding GPIO using whatever is the + * underlying firmware interface and then makes sure that the GPIO + * descriptor is requested before it is returned to the caller. + * + * Returns: + * On successful request the GPIO pin is configured in accordance with + * provided @dflags. + * + * In case of error an ERR_PTR() is returned. + */ +struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode, + const char *propname, int index, + enum gpiod_flags dflags, + const char *label) +{ + struct gpio_desc *desc = ERR_PTR(-ENODEV); + unsigned long lflags = 0; + int ret; + + if (!fwnode) + return ERR_PTR(-EINVAL); + + if (is_of_node(fwnode)) { + desc = gpiod_get_from_of_node(to_of_node(fwnode), + propname, index, + dflags, + label); + return desc; + } else if (is_acpi_node(fwnode)) { + struct acpi_gpio_info info; + + desc = acpi_node_get_gpiod(fwnode, propname, index, &info); + if (IS_ERR(desc)) + return desc; + + acpi_gpio_update_gpiod_flags(&dflags, &info); + + if (info.polarity == GPIO_ACTIVE_LOW) + lflags |= GPIO_ACTIVE_LOW; + } + + /* Currently only ACPI takes this path */ + ret = gpiod_request(desc, label); + if (ret) + return ERR_PTR(ret); + + ret = gpiod_configure_flags(desc, propname, lflags, dflags); + if (ret < 0) { + gpiod_put(desc); + return ERR_PTR(ret); + } + + return desc; +} +EXPORT_SYMBOL_GPL(fwnode_get_named_gpiod); + +/** + * gpiod_get_index_optional - obtain an optional GPIO from a multi-index GPIO + * function + * @dev: GPIO consumer, can be NULL for system-global GPIOs + * @con_id: function within the GPIO consumer + * @index: index of the GPIO to obtain in the consumer + * @flags: optional GPIO initialization flags + * + * This is equivalent to gpiod_get_index(), except that when no GPIO with the + * specified index was assigned to the requested function it will return NULL. + * This is convenient for drivers that need to handle optional GPIOs. + */ +struct gpio_desc *__must_check gpiod_get_index_optional(struct device *dev, + const char *con_id, + unsigned int index, + enum gpiod_flags flags) +{ + struct gpio_desc *desc; + + desc = gpiod_get_index(dev, con_id, index, flags); + if (IS_ERR(desc)) { + if (PTR_ERR(desc) == -ENOENT) + return NULL; + } + + return desc; +} +EXPORT_SYMBOL_GPL(gpiod_get_index_optional); + +/** + * gpiod_hog - Hog the specified GPIO desc given the provided flags + * @desc: gpio whose value will be assigned + * @name: gpio line name + * @lflags: gpio_lookup_flags - returned from of_find_gpio() or + * of_get_gpio_hog() + * @dflags: gpiod_flags - optional GPIO initialization flags + */ +int gpiod_hog(struct gpio_desc *desc, const char *name, + unsigned long lflags, enum gpiod_flags dflags) +{ + struct gpio_chip *chip; + struct gpio_desc *local_desc; + int hwnum; + int status; + + chip = gpiod_to_chip(desc); + hwnum = gpio_chip_hwgpio(desc); + + local_desc = gpiochip_request_own_desc(chip, hwnum, name); + if (IS_ERR(local_desc)) { + status = PTR_ERR(local_desc); + pr_err("requesting hog GPIO %s (chip %s, offset %d) failed, %d\n", + name, chip->label, hwnum, status); + return status; + } + + status = gpiod_configure_flags(desc, name, lflags, dflags); + if (status < 0) { + pr_err("setup of hog GPIO %s (chip %s, offset %d) failed, %d\n", + name, chip->label, hwnum, status); + gpiochip_free_own_desc(desc); + return status; + } + + /* Mark GPIO as hogged so it can be identified and removed later */ + set_bit(FLAG_IS_HOGGED, &desc->flags); + + pr_info("GPIO line %d (%s) hogged as %s%s\n", + desc_to_gpio(desc), name, + (dflags&GPIOD_FLAGS_BIT_DIR_OUT) ? "output" : "input", + (dflags&GPIOD_FLAGS_BIT_DIR_OUT) ? + (dflags&GPIOD_FLAGS_BIT_DIR_VAL) ? "/high" : "/low":""); + + return 0; +} + +/** + * gpiochip_free_hogs - Scan gpio-controller chip and release GPIO hog + * @chip: gpio chip to act on + * + * This is only used by of_gpiochip_remove to free hogged gpios + */ +static void gpiochip_free_hogs(struct gpio_chip *chip) +{ + int id; + + for (id = 0; id < chip->ngpio; id++) { + if (test_bit(FLAG_IS_HOGGED, &chip->gpiodev->descs[id].flags)) + gpiochip_free_own_desc(&chip->gpiodev->descs[id]); + } +} + +/** + * gpiod_get_array - obtain multiple GPIOs from a multi-index GPIO function + * @dev: GPIO consumer, can be NULL for system-global GPIOs + * @con_id: function within the GPIO consumer + * @flags: optional GPIO initialization flags + * + * This function acquires all the GPIOs defined under a given function. + * + * Return a struct gpio_descs containing an array of descriptors, -ENOENT if + * no GPIO has been assigned to the requested function, or another IS_ERR() + * code if an error occurred while trying to acquire the GPIOs. + */ +struct gpio_descs *__must_check gpiod_get_array(struct device *dev, + const char *con_id, + enum gpiod_flags flags) +{ + struct gpio_desc *desc; + struct gpio_descs *descs; + int count; + + count = gpiod_count(dev, con_id); + if (count < 0) + return ERR_PTR(count); + + descs = kzalloc(struct_size(descs, desc, count), GFP_KERNEL); + if (!descs) + return ERR_PTR(-ENOMEM); + + for (descs->ndescs = 0; descs->ndescs < count; ) { + desc = gpiod_get_index(dev, con_id, descs->ndescs, flags); + if (IS_ERR(desc)) { + gpiod_put_array(descs); + return ERR_CAST(desc); + } + descs->desc[descs->ndescs] = desc; + descs->ndescs++; + } + return descs; +} +EXPORT_SYMBOL_GPL(gpiod_get_array); + +/** + * gpiod_get_array_optional - obtain multiple GPIOs from a multi-index GPIO + * function + * @dev: GPIO consumer, can be NULL for system-global GPIOs + * @con_id: function within the GPIO consumer + * @flags: optional GPIO initialization flags + * + * This is equivalent to gpiod_get_array(), except that when no GPIO was + * assigned to the requested function it will return NULL. + */ +struct gpio_descs *__must_check gpiod_get_array_optional(struct device *dev, + const char *con_id, + enum gpiod_flags flags) +{ + struct gpio_descs *descs; + + descs = gpiod_get_array(dev, con_id, flags); + if (IS_ERR(descs) && (PTR_ERR(descs) == -ENOENT)) + return NULL; + + return descs; +} +EXPORT_SYMBOL_GPL(gpiod_get_array_optional); + +/** + * gpiod_put - dispose of a GPIO descriptor + * @desc: GPIO descriptor to dispose of + * + * No descriptor can be used after gpiod_put() has been called on it. + */ +void gpiod_put(struct gpio_desc *desc) +{ + gpiod_free(desc); +} +EXPORT_SYMBOL_GPL(gpiod_put); + +/** + * gpiod_put_array - dispose of multiple GPIO descriptors + * @descs: struct gpio_descs containing an array of descriptors + */ +void gpiod_put_array(struct gpio_descs *descs) +{ + unsigned int i; + + for (i = 0; i < descs->ndescs; i++) + gpiod_put(descs->desc[i]); + + kfree(descs); +} +EXPORT_SYMBOL_GPL(gpiod_put_array); + +static int __init gpiolib_dev_init(void) +{ + int ret; + + /* Register GPIO sysfs bus */ + ret = bus_register(&gpio_bus_type); + if (ret < 0) { + pr_err("gpiolib: could not register GPIO bus type\n"); + return ret; + } + + ret = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpiochip"); + if (ret < 0) { + pr_err("gpiolib: failed to allocate char dev region\n"); + bus_unregister(&gpio_bus_type); + } else { + gpiolib_initialized = true; + gpiochip_setup_devs(); + } + return ret; +} +core_initcall(gpiolib_dev_init); + +#ifdef CONFIG_DEBUG_FS + +static void gpiolib_dbg_show(struct seq_file *s, struct gpio_device *gdev) +{ + unsigned i; + struct gpio_chip *chip = gdev->chip; + unsigned gpio = gdev->base; + struct gpio_desc *gdesc = &gdev->descs[0]; + int is_out; + int is_irq; + + for (i = 0; i < gdev->ngpio; i++, gpio++, gdesc++) { + if (!test_bit(FLAG_REQUESTED, &gdesc->flags)) { + if (gdesc->name) { + seq_printf(s, " gpio-%-3d (%-20.20s)\n", + gpio, gdesc->name); + } + continue; + } + + gpiod_get_direction(gdesc); + is_out = test_bit(FLAG_IS_OUT, &gdesc->flags); + is_irq = test_bit(FLAG_USED_AS_IRQ, &gdesc->flags); + seq_printf(s, " gpio-%-3d (%-20.20s|%-20.20s) %s %s %s", + gpio, gdesc->name ? gdesc->name : "", gdesc->label, + is_out ? "out" : "in ", + chip->get ? (chip->get(chip, i) ? "hi" : "lo") : "? ", + is_irq ? "IRQ" : " "); + seq_printf(s, "\n"); + } +} + +static void *gpiolib_seq_start(struct seq_file *s, loff_t *pos) +{ + unsigned long flags; + struct gpio_device *gdev = NULL; + loff_t index = *pos; + + s->private = ""; + + spin_lock_irqsave(&gpio_lock, flags); + list_for_each_entry(gdev, &gpio_devices, list) + if (index-- == 0) { + spin_unlock_irqrestore(&gpio_lock, flags); + return gdev; + } + spin_unlock_irqrestore(&gpio_lock, flags); + + return NULL; +} + +static void *gpiolib_seq_next(struct seq_file *s, void *v, loff_t *pos) +{ + unsigned long flags; + struct gpio_device *gdev = v; + void *ret = NULL; + + spin_lock_irqsave(&gpio_lock, flags); + if (list_is_last(&gdev->list, &gpio_devices)) + ret = NULL; + else + ret = list_entry(gdev->list.next, struct gpio_device, list); + spin_unlock_irqrestore(&gpio_lock, flags); + + s->private = "\n"; + ++*pos; + + return ret; +} + +static void gpiolib_seq_stop(struct seq_file *s, void *v) +{ +} + +static int gpiolib_seq_show(struct seq_file *s, void *v) +{ + struct gpio_device *gdev = v; + struct gpio_chip *chip = gdev->chip; + struct device *parent; + + if (!chip) { + seq_printf(s, "%s%s: (dangling chip)", (char *)s->private, + dev_name(&gdev->dev)); + return 0; + } + + seq_printf(s, "%s%s: GPIOs %d-%d", (char *)s->private, + dev_name(&gdev->dev), + gdev->base, gdev->base + gdev->ngpio - 1); + parent = chip->parent; + if (parent) + seq_printf(s, ", parent: %s/%s", + parent->bus ? parent->bus->name : "no-bus", + dev_name(parent)); + if (chip->label) + seq_printf(s, ", %s", chip->label); + if (chip->can_sleep) + seq_printf(s, ", can sleep"); + seq_printf(s, ":\n"); + + if (chip->dbg_show) + chip->dbg_show(s, chip); + else + gpiolib_dbg_show(s, gdev); + + return 0; +} + +static const struct seq_operations gpiolib_seq_ops = { + .start = gpiolib_seq_start, + .next = gpiolib_seq_next, + .stop = gpiolib_seq_stop, + .show = gpiolib_seq_show, +}; + +static int gpiolib_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &gpiolib_seq_ops); +} + +static const struct file_operations gpiolib_operations = { + .owner = THIS_MODULE, + .open = gpiolib_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static int __init gpiolib_debugfs_init(void) +{ + /* /sys/kernel/debug/gpio */ + (void) debugfs_create_file("gpio", S_IFREG | S_IRUGO, + NULL, NULL, &gpiolib_operations); + return 0; +} +subsys_initcall(gpiolib_debugfs_init); + +#endif /* DEBUG_FS */ diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h new file mode 100644 index 000000000..a7e49fef7 --- /dev/null +++ b/drivers/gpio/gpiolib.h @@ -0,0 +1,298 @@ +/* + * Internal GPIO functions. + * + * Copyright (C) 2013, Intel Corporation + * Author: Mika Westerberg <mika.westerberg@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef GPIOLIB_H +#define GPIOLIB_H + +#include <linux/gpio/driver.h> +#include <linux/gpio/consumer.h> /* for enum gpiod_flags */ +#include <linux/err.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/cdev.h> + +enum of_gpio_flags; +enum gpio_lookup_flags; +struct acpi_device; + +/** + * struct gpio_device - internal state container for GPIO devices + * @id: numerical ID number for the GPIO chip + * @dev: the GPIO device struct + * @chrdev: character device for the GPIO device + * @mockdev: class device used by the deprecated sysfs interface (may be + * NULL) + * @owner: helps prevent removal of modules exporting active GPIOs + * @chip: pointer to the corresponding gpiochip, holding static + * data for this device + * @descs: array of ngpio descriptors. + * @ngpio: the number of GPIO lines on this GPIO device, equal to the size + * of the @descs array. + * @base: GPIO base in the DEPRECATED global Linux GPIO numberspace, assigned + * at device creation time. + * @label: a descriptive name for the GPIO device, such as the part number + * or name of the IP component in a System on Chip. + * @data: per-instance data assigned by the driver + * @list: links gpio_device:s together for traversal + * + * This state container holds most of the runtime variable data + * for a GPIO device and can hold references and live on after the + * GPIO chip has been removed, if it is still being used from + * userspace. + */ +struct gpio_device { + int id; + struct device dev; + struct cdev chrdev; + struct device *mockdev; + struct module *owner; + struct gpio_chip *chip; + struct gpio_desc *descs; + int base; + u16 ngpio; + const char *label; + void *data; + struct list_head list; + +#ifdef CONFIG_PINCTRL + /* + * If CONFIG_PINCTRL is enabled, then gpio controllers can optionally + * describe the actual pin range which they serve in an SoC. This + * information would be used by pinctrl subsystem to configure + * corresponding pins for gpio usage. + */ + struct list_head pin_ranges; +#endif +}; + +/** + * struct acpi_gpio_info - ACPI GPIO specific information + * @adev: reference to ACPI device which consumes GPIO resource + * @flags: GPIO initialization flags + * @gpioint: if %true this GPIO is of type GpioInt otherwise type is GpioIo + * @polarity: interrupt polarity as provided by ACPI + * @triggering: triggering type as provided by ACPI + * @quirks: Linux specific quirks as provided by struct acpi_gpio_mapping + */ +struct acpi_gpio_info { + struct acpi_device *adev; + enum gpiod_flags flags; + bool gpioint; + int polarity; + int triggering; + unsigned int quirks; +}; + +/* gpio suffixes used for ACPI and device tree lookup */ +static __maybe_unused const char * const gpio_suffixes[] = { "gpios", "gpio" }; + +#ifdef CONFIG_OF_GPIO +struct gpio_desc *of_find_gpio(struct device *dev, + const char *con_id, + unsigned int idx, + enum gpio_lookup_flags *flags); +struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np, + const char *list_name, int index, enum of_gpio_flags *flags); +int of_gpiochip_add(struct gpio_chip *gc); +void of_gpiochip_remove(struct gpio_chip *gc); +#else +static inline struct gpio_desc *of_find_gpio(struct device *dev, + const char *con_id, + unsigned int idx, + enum gpio_lookup_flags *flags) +{ + return ERR_PTR(-ENOENT); +} +static inline struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np, + const char *list_name, int index, enum of_gpio_flags *flags) +{ + return ERR_PTR(-ENOENT); +} +static inline int of_gpiochip_add(struct gpio_chip *gc) { return 0; } +static inline void of_gpiochip_remove(struct gpio_chip *gc) { } +#endif /* CONFIG_OF_GPIO */ + +#ifdef CONFIG_ACPI +void acpi_gpiochip_add(struct gpio_chip *chip); +void acpi_gpiochip_remove(struct gpio_chip *chip); + +void acpi_gpiochip_request_interrupts(struct gpio_chip *chip); +void acpi_gpiochip_free_interrupts(struct gpio_chip *chip); + +int acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, + struct acpi_gpio_info *info); + +struct gpio_desc *acpi_find_gpio(struct device *dev, + const char *con_id, + unsigned int idx, + enum gpiod_flags *dflags, + enum gpio_lookup_flags *lookupflags); +struct gpio_desc *acpi_node_get_gpiod(struct fwnode_handle *fwnode, + const char *propname, int index, + struct acpi_gpio_info *info); + +int acpi_gpio_count(struct device *dev, const char *con_id); + +bool acpi_can_fallback_to_crs(struct acpi_device *adev, const char *con_id); +#else +static inline void acpi_gpiochip_add(struct gpio_chip *chip) { } +static inline void acpi_gpiochip_remove(struct gpio_chip *chip) { } + +static inline void +acpi_gpiochip_request_interrupts(struct gpio_chip *chip) { } + +static inline void +acpi_gpiochip_free_interrupts(struct gpio_chip *chip) { } + +static inline int +acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, struct acpi_gpio_info *info) +{ + return 0; +} + +static inline struct gpio_desc * +acpi_find_gpio(struct device *dev, const char *con_id, + unsigned int idx, enum gpiod_flags *dflags, + enum gpio_lookup_flags *lookupflags) +{ + return ERR_PTR(-ENOENT); +} +static inline struct gpio_desc * +acpi_node_get_gpiod(struct fwnode_handle *fwnode, const char *propname, + int index, struct acpi_gpio_info *info) +{ + return ERR_PTR(-ENXIO); +} +static inline int acpi_gpio_count(struct device *dev, const char *con_id) +{ + return -ENODEV; +} + +static inline bool acpi_can_fallback_to_crs(struct acpi_device *adev, + const char *con_id) +{ + return false; +} +#endif + +struct gpio_desc *gpiochip_get_desc(struct gpio_chip *chip, u16 hwnum); +int gpiod_get_array_value_complex(bool raw, bool can_sleep, + unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array); +int gpiod_set_array_value_complex(bool raw, bool can_sleep, + unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array); + +/* This is just passed between gpiolib and devres */ +struct gpio_desc *gpiod_get_from_of_node(struct device_node *node, + const char *propname, int index, + enum gpiod_flags dflags, + const char *label); + +extern struct spinlock gpio_lock; +extern struct list_head gpio_devices; + +struct gpio_desc { + struct gpio_device *gdev; + unsigned long flags; +/* flag symbols are bit numbers */ +#define FLAG_REQUESTED 0 +#define FLAG_IS_OUT 1 +#define FLAG_EXPORT 2 /* protected by sysfs_lock */ +#define FLAG_SYSFS 3 /* exported via /sys/class/gpio/control */ +#define FLAG_ACTIVE_LOW 6 /* value has active low */ +#define FLAG_OPEN_DRAIN 7 /* Gpio is open drain type */ +#define FLAG_OPEN_SOURCE 8 /* Gpio is open source type */ +#define FLAG_USED_AS_IRQ 9 /* GPIO is connected to an IRQ */ +#define FLAG_IS_HOGGED 11 /* GPIO is hogged */ +#define FLAG_TRANSITORY 12 /* GPIO may lose value in sleep or reset */ + + /* Connection label */ + const char *label; + /* Name of the GPIO */ + const char *name; +}; + +int gpiod_request(struct gpio_desc *desc, const char *label); +void gpiod_free(struct gpio_desc *desc); +int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id, + unsigned long lflags, enum gpiod_flags dflags); +int gpiod_hog(struct gpio_desc *desc, const char *name, + unsigned long lflags, enum gpiod_flags dflags); + +/* + * Return the GPIO number of the passed descriptor relative to its chip + */ +static inline int gpio_chip_hwgpio(const struct gpio_desc *desc) +{ + return desc - &desc->gdev->descs[0]; +} + +void devprop_gpiochip_set_names(struct gpio_chip *chip, + const struct fwnode_handle *fwnode); + +/* With descriptor prefix */ + +#define gpiod_emerg(desc, fmt, ...) \ + pr_emerg("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?",\ + ##__VA_ARGS__) +#define gpiod_crit(desc, fmt, ...) \ + pr_crit("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?", \ + ##__VA_ARGS__) +#define gpiod_err(desc, fmt, ...) \ + pr_err("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?", \ + ##__VA_ARGS__) +#define gpiod_warn(desc, fmt, ...) \ + pr_warn("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?", \ + ##__VA_ARGS__) +#define gpiod_info(desc, fmt, ...) \ + pr_info("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?", \ + ##__VA_ARGS__) +#define gpiod_dbg(desc, fmt, ...) \ + pr_debug("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?",\ + ##__VA_ARGS__) + +/* With chip prefix */ + +#define chip_emerg(chip, fmt, ...) \ + dev_emerg(&chip->gpiodev->dev, "(%s): " fmt, chip->label, ##__VA_ARGS__) +#define chip_crit(chip, fmt, ...) \ + dev_crit(&chip->gpiodev->dev, "(%s): " fmt, chip->label, ##__VA_ARGS__) +#define chip_err(chip, fmt, ...) \ + dev_err(&chip->gpiodev->dev, "(%s): " fmt, chip->label, ##__VA_ARGS__) +#define chip_warn(chip, fmt, ...) \ + dev_warn(&chip->gpiodev->dev, "(%s): " fmt, chip->label, ##__VA_ARGS__) +#define chip_info(chip, fmt, ...) \ + dev_info(&chip->gpiodev->dev, "(%s): " fmt, chip->label, ##__VA_ARGS__) +#define chip_dbg(chip, fmt, ...) \ + dev_dbg(&chip->gpiodev->dev, "(%s): " fmt, chip->label, ##__VA_ARGS__) + +#ifdef CONFIG_GPIO_SYSFS + +int gpiochip_sysfs_register(struct gpio_device *gdev); +void gpiochip_sysfs_unregister(struct gpio_device *gdev); + +#else + +static inline int gpiochip_sysfs_register(struct gpio_device *gdev) +{ + return 0; +} + +static inline void gpiochip_sysfs_unregister(struct gpio_device *gdev) +{ +} + +#endif /* CONFIG_GPIO_SYSFS */ + +#endif /* GPIOLIB_H */ |