diff options
Diffstat (limited to 'drivers/hsi/controllers/omap_ssi.h')
| -rw-r--r-- | drivers/hsi/controllers/omap_ssi.h | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/drivers/hsi/controllers/omap_ssi.h b/drivers/hsi/controllers/omap_ssi.h new file mode 100644 index 000000000..32ced0c8f --- /dev/null +++ b/drivers/hsi/controllers/omap_ssi.h @@ -0,0 +1,177 @@ +/* OMAP SSI internal interface. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * Copyright (C) 2013 Sebastian Reichel + * + * Contact: Carlos Chinea <carlos.chinea@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_HSI_OMAP_SSI_H__ +#define __LINUX_HSI_OMAP_SSI_H__ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/hsi/hsi.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +#define SSI_MAX_CHANNELS 8 +#define SSI_MAX_GDD_LCH 8 +#define SSI_BYTES_TO_FRAMES(x) ((((x) - 1) >> 2) + 1) + +#define SSI_WAKE_EN 0 + +/** + * struct omap_ssm_ctx - OMAP synchronous serial module (TX/RX) context + * @mode: Bit transmission mode + * @channels: Number of channels + * @framesize: Frame size in bits + * @timeout: RX frame timeout + * @divisor: TX divider + * @arb_mode: Arbitration mode for TX frame (Round robin, priority) + */ +struct omap_ssm_ctx { + u32 mode; + u32 channels; + u32 frame_size; + union { + u32 timeout; /* Rx Only */ + struct { + u32 arb_mode; + u32 divisor; + }; /* Tx only */ + }; +}; + +/** + * struct omap_ssi_port - OMAP SSI port data + * @dev: device associated to the port (HSI port) + * @pdev: platform device associated to the port + * @sst_dma: SSI transmitter physical base address + * @ssr_dma: SSI receiver physical base address + * @sst_base: SSI transmitter base address + * @ssr_base: SSI receiver base address + * @wk_lock: spin lock to serialize access to the wake lines + * @lock: Spin lock to serialize access to the SSI port + * @channels: Current number of channels configured (1,2,4 or 8) + * @txqueue: TX message queues + * @rxqueue: RX message queues + * @brkqueue: Queue of incoming HWBREAK requests (FRAME mode) + * @errqueue: Queue for failed messages + * @errqueue_work: Delayed Work for failed messages + * @irq: IRQ number + * @wake_irq: IRQ number for incoming wake line (-1 if none) + * @wake_gpio: GPIO number for incoming wake line (-1 if none) + * @flags: flags to keep track of states + * @wk_refcount: Reference count for output wake line + * @work: worker for starting TX + * @sys_mpu_enable: Context for the interrupt enable register for irq 0 + * @sst: Context for the synchronous serial transmitter + * @ssr: Context for the synchronous serial receiver + */ +struct omap_ssi_port { + struct device *dev; + struct device *pdev; + dma_addr_t sst_dma; + dma_addr_t ssr_dma; + void __iomem *sst_base; + void __iomem *ssr_base; + spinlock_t wk_lock; + spinlock_t lock; + unsigned int channels; + struct list_head txqueue[SSI_MAX_CHANNELS]; + struct list_head rxqueue[SSI_MAX_CHANNELS]; + struct list_head brkqueue; + struct list_head errqueue; + struct delayed_work errqueue_work; + unsigned int irq; + int wake_irq; + struct gpio_desc *wake_gpio; + bool wktest:1; /* FIXME: HACK to be removed */ + unsigned long flags; + unsigned int wk_refcount; + struct work_struct work; + /* OMAP SSI port context */ + u32 sys_mpu_enable; /* We use only one irq */ + struct omap_ssm_ctx sst; + struct omap_ssm_ctx ssr; + u32 loss_count; + u32 port_id; +#ifdef CONFIG_DEBUG_FS + struct dentry *dir; +#endif +}; + +/** + * struct gdd_trn - GDD transaction data + * @msg: Pointer to the HSI message being served + * @sg: Pointer to the current sg entry being served + */ +struct gdd_trn { + struct hsi_msg *msg; + struct scatterlist *sg; +}; + +/** + * struct omap_ssi_controller - OMAP SSI controller data + * @dev: device associated to the controller (HSI controller) + * @sys: SSI I/O base address + * @gdd: GDD I/O base address + * @fck: SSI functional clock + * @gdd_irq: IRQ line for GDD + * @gdd_tasklet: bottom half for DMA transfers + * @gdd_trn: Array of GDD transaction data for ongoing GDD transfers + * @lock: lock to serialize access to GDD + * @fck_nb: DVFS notfifier block + * @fck_rate: clock rate + * @loss_count: To follow if we need to restore context or not + * @max_speed: Maximum TX speed (Kb/s) set by the clients. + * @gdd_gcr: SSI GDD saved context + * @get_loss: Pointer to omap_pm_get_dev_context_loss_count, if any + * @port: Array of pointers of the ports of the controller + * @dir: Debugfs SSI root directory + */ +struct omap_ssi_controller { + struct device *dev; + void __iomem *sys; + void __iomem *gdd; + struct clk *fck; + unsigned int gdd_irq; + struct tasklet_struct gdd_tasklet; + struct gdd_trn gdd_trn[SSI_MAX_GDD_LCH]; + spinlock_t lock; + struct notifier_block fck_nb; + unsigned long fck_rate; + u32 loss_count; + u32 max_speed; + /* OMAP SSI Controller context */ + u32 gdd_gcr; + int (*get_loss)(struct device *dev); + struct omap_ssi_port **port; +#ifdef CONFIG_DEBUG_FS + struct dentry *dir; +#endif +}; + +void omap_ssi_port_update_fclk(struct hsi_controller *ssi, + struct omap_ssi_port *omap_port); + +extern struct platform_driver ssi_port_pdriver; + +#endif /* __LINUX_HSI_OMAP_SSI_H__ */ |