diff options
Diffstat (limited to 'drivers/hwmon/adm9240.c')
| -rw-r--r-- | drivers/hwmon/adm9240.c | 773 |
1 files changed, 773 insertions, 0 deletions
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c new file mode 100644 index 000000000..255413fdb --- /dev/null +++ b/drivers/hwmon/adm9240.c @@ -0,0 +1,773 @@ +/* + * adm9240.c Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * + * Copyright (C) 1999 Frodo Looijaard <frodol@dds.nl> + * Philip Edelbrock <phil@netroedge.com> + * Copyright (C) 2003 Michiel Rook <michiel@grendelproject.nl> + * Copyright (C) 2005 Grant Coady <gcoady.lk@gmail.com> with valuable + * guidance from Jean Delvare + * + * Driver supports Analog Devices ADM9240 + * Dallas Semiconductor DS1780 + * National Semiconductor LM81 + * + * ADM9240 is the reference, DS1780 and LM81 are register compatibles + * + * Voltage Six inputs are scaled by chip, VID also reported + * Temperature Chip temperature to 0.5'C, maximum and max_hysteris + * Fans 2 fans, low speed alarm, automatic fan clock divider + * Alarms 16-bit map of active alarms + * Analog Out 0..1250 mV output + * + * Chassis Intrusion: clear CI latch with 'echo 0 > intrusion0_alarm' + * + * Test hardware: Intel SE440BX-2 desktop motherboard --Grant + * + * LM81 extended temp reading not implemented + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon-sysfs.h> +#include <linux/hwmon.h> +#include <linux/hwmon-vid.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/jiffies.h> + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, + I2C_CLIENT_END }; + +enum chips { adm9240, ds1780, lm81 }; + +/* ADM9240 registers */ +#define ADM9240_REG_MAN_ID 0x3e +#define ADM9240_REG_DIE_REV 0x3f +#define ADM9240_REG_CONFIG 0x40 + +#define ADM9240_REG_IN(nr) (0x20 + (nr)) /* 0..5 */ +#define ADM9240_REG_IN_MAX(nr) (0x2b + (nr) * 2) +#define ADM9240_REG_IN_MIN(nr) (0x2c + (nr) * 2) +#define ADM9240_REG_FAN(nr) (0x28 + (nr)) /* 0..1 */ +#define ADM9240_REG_FAN_MIN(nr) (0x3b + (nr)) +#define ADM9240_REG_INT(nr) (0x41 + (nr)) +#define ADM9240_REG_INT_MASK(nr) (0x43 + (nr)) +#define ADM9240_REG_TEMP 0x27 +#define ADM9240_REG_TEMP_MAX(nr) (0x39 + (nr)) /* 0, 1 = high, hyst */ +#define ADM9240_REG_ANALOG_OUT 0x19 +#define ADM9240_REG_CHASSIS_CLEAR 0x46 +#define ADM9240_REG_VID_FAN_DIV 0x47 +#define ADM9240_REG_I2C_ADDR 0x48 +#define ADM9240_REG_VID4 0x49 +#define ADM9240_REG_TEMP_CONF 0x4b + +/* generalised scaling with integer rounding */ +static inline int SCALE(long val, int mul, int div) +{ + if (val < 0) + return (val * mul - div / 2) / div; + else + return (val * mul + div / 2) / div; +} + +/* adm9240 internally scales voltage measurements */ +static const u16 nom_mv[] = { 2500, 2700, 3300, 5000, 12000, 2700 }; + +static inline unsigned int IN_FROM_REG(u8 reg, int n) +{ + return SCALE(reg, nom_mv[n], 192); +} + +static inline u8 IN_TO_REG(unsigned long val, int n) +{ + val = clamp_val(val, 0, nom_mv[n] * 255 / 192); + return SCALE(val, 192, nom_mv[n]); +} + +/* temperature range: -40..125, 127 disables temperature alarm */ +static inline s8 TEMP_TO_REG(long val) +{ + val = clamp_val(val, -40000, 127000); + return SCALE(val, 1, 1000); +} + +/* two fans, each with low fan speed limit */ +static inline unsigned int FAN_FROM_REG(u8 reg, u8 div) +{ + if (!reg) /* error */ + return -1; + + if (reg == 255) + return 0; + + return SCALE(1350000, 1, reg * div); +} + +/* analog out 0..1250mV */ +static inline u8 AOUT_TO_REG(unsigned long val) +{ + val = clamp_val(val, 0, 1250); + return SCALE(val, 255, 1250); +} + +static inline unsigned int AOUT_FROM_REG(u8 reg) +{ + return SCALE(reg, 1250, 255); +} + +/* per client data */ +struct adm9240_data { + struct i2c_client *client; + struct mutex update_lock; + char valid; + unsigned long last_updated_measure; + unsigned long last_updated_config; + + u8 in[6]; /* ro in0_input */ + u8 in_max[6]; /* rw in0_max */ + u8 in_min[6]; /* rw in0_min */ + u8 fan[2]; /* ro fan1_input */ + u8 fan_min[2]; /* rw fan1_min */ + u8 fan_div[2]; /* rw fan1_div, read-only accessor */ + s16 temp; /* ro temp1_input, 9-bit sign-extended */ + s8 temp_max[2]; /* rw 0 -> temp_max, 1 -> temp_max_hyst */ + u16 alarms; /* ro alarms */ + u8 aout; /* rw aout_output */ + u8 vid; /* ro vid */ + u8 vrm; /* -- vrm set on startup, no accessor */ +}; + +/* write new fan div, callers must hold data->update_lock */ +static void adm9240_write_fan_div(struct i2c_client *client, int nr, + u8 fan_div) +{ + u8 reg, old, shift = (nr + 2) * 2; + + reg = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV); + old = (reg >> shift) & 3; + reg &= ~(3 << shift); + reg |= (fan_div << shift); + i2c_smbus_write_byte_data(client, ADM9240_REG_VID_FAN_DIV, reg); + dev_dbg(&client->dev, + "fan%d clock divider changed from %u to %u\n", + nr + 1, 1 << old, 1 << fan_div); +} + +static struct adm9240_data *adm9240_update_device(struct device *dev) +{ + struct adm9240_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int i; + + mutex_lock(&data->update_lock); + + /* minimum measurement cycle: 1.75 seconds */ + if (time_after(jiffies, data->last_updated_measure + (HZ * 7 / 4)) + || !data->valid) { + + for (i = 0; i < 6; i++) { /* read voltages */ + data->in[i] = i2c_smbus_read_byte_data(client, + ADM9240_REG_IN(i)); + } + data->alarms = i2c_smbus_read_byte_data(client, + ADM9240_REG_INT(0)) | + i2c_smbus_read_byte_data(client, + ADM9240_REG_INT(1)) << 8; + + /* + * read temperature: assume temperature changes less than + * 0.5'C per two measurement cycles thus ignore possible + * but unlikely aliasing error on lsb reading. --Grant + */ + data->temp = (i2c_smbus_read_byte_data(client, + ADM9240_REG_TEMP) << 8) | + i2c_smbus_read_byte_data(client, + ADM9240_REG_TEMP_CONF); + + for (i = 0; i < 2; i++) { /* read fans */ + data->fan[i] = i2c_smbus_read_byte_data(client, + ADM9240_REG_FAN(i)); + + /* adjust fan clock divider on overflow */ + if (data->valid && data->fan[i] == 255 && + data->fan_div[i] < 3) { + + adm9240_write_fan_div(client, i, + ++data->fan_div[i]); + + /* adjust fan_min if active, but not to 0 */ + if (data->fan_min[i] < 255 && + data->fan_min[i] >= 2) + data->fan_min[i] /= 2; + } + } + data->last_updated_measure = jiffies; + } + + /* minimum config reading cycle: 300 seconds */ + if (time_after(jiffies, data->last_updated_config + (HZ * 300)) + || !data->valid) { + + for (i = 0; i < 6; i++) { + data->in_min[i] = i2c_smbus_read_byte_data(client, + ADM9240_REG_IN_MIN(i)); + data->in_max[i] = i2c_smbus_read_byte_data(client, + ADM9240_REG_IN_MAX(i)); + } + for (i = 0; i < 2; i++) { + data->fan_min[i] = i2c_smbus_read_byte_data(client, + ADM9240_REG_FAN_MIN(i)); + } + data->temp_max[0] = i2c_smbus_read_byte_data(client, + ADM9240_REG_TEMP_MAX(0)); + data->temp_max[1] = i2c_smbus_read_byte_data(client, + ADM9240_REG_TEMP_MAX(1)); + + /* read fan divs and 5-bit VID */ + i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV); + data->fan_div[0] = (i >> 4) & 3; + data->fan_div[1] = (i >> 6) & 3; + data->vid = i & 0x0f; + data->vid |= (i2c_smbus_read_byte_data(client, + ADM9240_REG_VID4) & 1) << 4; + /* read analog out */ + data->aout = i2c_smbus_read_byte_data(client, + ADM9240_REG_ANALOG_OUT); + + data->last_updated_config = jiffies; + data->valid = 1; + } + mutex_unlock(&data->update_lock); + return data; +} + +/*** sysfs accessors ***/ + +/* temperature */ +static ssize_t temp1_input_show(struct device *dev, + struct device_attribute *dummy, char *buf) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", data->temp / 128 * 500); /* 9-bit value */ +} + +static ssize_t show_max(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", data->temp_max[attr->index] * 1000); +} + +static ssize_t set_max(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm9240_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->temp_max[attr->index] = TEMP_TO_REG(val); + i2c_smbus_write_byte_data(client, ADM9240_REG_TEMP_MAX(attr->index), + data->temp_max[attr->index]); + mutex_unlock(&data->update_lock); + return count; +} + +static DEVICE_ATTR_RO(temp1_input); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, + show_max, set_max, 0); +static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, + show_max, set_max, 1); + +/* voltage */ +static ssize_t show_in(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in[attr->index], + attr->index)); +} + +static ssize_t show_in_min(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[attr->index], + attr->index)); +} + +static ssize_t show_in_max(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[attr->index], + attr->index)); +} + +static ssize_t set_in_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm9240_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->in_min[attr->index] = IN_TO_REG(val, attr->index); + i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(attr->index), + data->in_min[attr->index]); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t set_in_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm9240_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->in_max[attr->index] = IN_TO_REG(val, attr->index); + i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(attr->index), + data->in_max[attr->index]); + mutex_unlock(&data->update_lock); + return count; +} + +#define vin(nr) \ +static SENSOR_DEVICE_ATTR(in##nr##_input, S_IRUGO, \ + show_in, NULL, nr); \ +static SENSOR_DEVICE_ATTR(in##nr##_min, S_IRUGO | S_IWUSR, \ + show_in_min, set_in_min, nr); \ +static SENSOR_DEVICE_ATTR(in##nr##_max, S_IRUGO | S_IWUSR, \ + show_in_max, set_in_max, nr); + +vin(0); +vin(1); +vin(2); +vin(3); +vin(4); +vin(5); + +/* fans */ +static ssize_t show_fan(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index], + 1 << data->fan_div[attr->index])); +} + +static ssize_t show_fan_min(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[attr->index], + 1 << data->fan_div[attr->index])); +} + +static ssize_t show_fan_div(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", 1 << data->fan_div[attr->index]); +} + +/* + * set fan speed low limit: + * + * - value is zero: disable fan speed low limit alarm + * + * - value is below fan speed measurement range: enable fan speed low + * limit alarm to be asserted while fan speed too slow to measure + * + * - otherwise: select fan clock divider to suit fan speed low limit, + * measurement code may adjust registers to ensure fan speed reading + */ +static ssize_t set_fan_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm9240_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = attr->index; + u8 new_div; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + + if (!val) { + data->fan_min[nr] = 255; + new_div = data->fan_div[nr]; + + dev_dbg(&client->dev, "fan%u low limit set disabled\n", + nr + 1); + + } else if (val < 1350000 / (8 * 254)) { + new_div = 3; + data->fan_min[nr] = 254; + + dev_dbg(&client->dev, "fan%u low limit set minimum %u\n", + nr + 1, FAN_FROM_REG(254, 1 << new_div)); + + } else { + unsigned int new_min = 1350000 / val; + + new_div = 0; + while (new_min > 192 && new_div < 3) { + new_div++; + new_min /= 2; + } + if (!new_min) /* keep > 0 */ + new_min++; + + data->fan_min[nr] = new_min; + + dev_dbg(&client->dev, "fan%u low limit set fan speed %u\n", + nr + 1, FAN_FROM_REG(new_min, 1 << new_div)); + } + + if (new_div != data->fan_div[nr]) { + data->fan_div[nr] = new_div; + adm9240_write_fan_div(client, nr, new_div); + } + i2c_smbus_write_byte_data(client, ADM9240_REG_FAN_MIN(nr), + data->fan_min[nr]); + + mutex_unlock(&data->update_lock); + return count; +} + +#define fan(nr) \ +static SENSOR_DEVICE_ATTR(fan##nr##_input, S_IRUGO, \ + show_fan, NULL, nr - 1); \ +static SENSOR_DEVICE_ATTR(fan##nr##_div, S_IRUGO, \ + show_fan_div, NULL, nr - 1); \ +static SENSOR_DEVICE_ATTR(fan##nr##_min, S_IRUGO | S_IWUSR, \ + show_fan_min, set_fan_min, nr - 1); + +fan(1); +fan(2); + +/* alarms */ +static ssize_t alarms_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%u\n", data->alarms); +} +static DEVICE_ATTR_RO(alarms); + +static ssize_t show_alarm(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int bitnr = to_sensor_dev_attr(attr)->index; + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); +} +static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9); +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7); + +/* vid */ +static ssize_t cpu0_vid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); +} +static DEVICE_ATTR_RO(cpu0_vid); + +/* analog output */ +static ssize_t aout_output_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout)); +} + +static ssize_t aout_output_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adm9240_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->aout = AOUT_TO_REG(val); + i2c_smbus_write_byte_data(client, ADM9240_REG_ANALOG_OUT, data->aout); + mutex_unlock(&data->update_lock); + return count; +} +static DEVICE_ATTR_RW(aout_output); + +static ssize_t chassis_clear(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adm9240_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long val; + + if (kstrtoul(buf, 10, &val) || val != 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + i2c_smbus_write_byte_data(client, ADM9240_REG_CHASSIS_CLEAR, 0x80); + data->valid = 0; /* Force cache refresh */ + mutex_unlock(&data->update_lock); + dev_dbg(&client->dev, "chassis intrusion latch cleared\n"); + + return count; +} +static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR, show_alarm, + chassis_clear, 12); + +static struct attribute *adm9240_attrs[] = { + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in0_alarm.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &dev_attr_temp1_input.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_div.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan2_div.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &dev_attr_alarms.attr, + &dev_attr_aout_output.attr, + &sensor_dev_attr_intrusion0_alarm.dev_attr.attr, + &dev_attr_cpu0_vid.attr, + NULL +}; + +ATTRIBUTE_GROUPS(adm9240); + + +/*** sensor chip detect and driver install ***/ + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm9240_detect(struct i2c_client *new_client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = new_client->adapter; + const char *name = ""; + int address = new_client->addr; + u8 man_id, die_rev; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + /* verify chip: reg address should match i2c address */ + if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR) + != address) { + dev_err(&adapter->dev, "detect fail: address match, 0x%02x\n", + address); + return -ENODEV; + } + + /* check known chip manufacturer */ + man_id = i2c_smbus_read_byte_data(new_client, ADM9240_REG_MAN_ID); + if (man_id == 0x23) { + name = "adm9240"; + } else if (man_id == 0xda) { + name = "ds1780"; + } else if (man_id == 0x01) { + name = "lm81"; + } else { + dev_err(&adapter->dev, "detect fail: unknown manuf, 0x%02x\n", + man_id); + return -ENODEV; + } + + /* successful detect, print chip info */ + die_rev = i2c_smbus_read_byte_data(new_client, ADM9240_REG_DIE_REV); + dev_info(&adapter->dev, "found %s revision %u\n", + man_id == 0x23 ? "ADM9240" : + man_id == 0xda ? "DS1780" : "LM81", die_rev); + + strlcpy(info->type, name, I2C_NAME_SIZE); + + return 0; +} + +static void adm9240_init_client(struct i2c_client *client) +{ + struct adm9240_data *data = i2c_get_clientdata(client); + u8 conf = i2c_smbus_read_byte_data(client, ADM9240_REG_CONFIG); + u8 mode = i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP_CONF) & 3; + + data->vrm = vid_which_vrm(); /* need this to report vid as mV */ + + dev_info(&client->dev, "Using VRM: %d.%d\n", data->vrm / 10, + data->vrm % 10); + + if (conf & 1) { /* measurement cycle running: report state */ + + dev_info(&client->dev, "status: config 0x%02x mode %u\n", + conf, mode); + + } else { /* cold start: open limits before starting chip */ + int i; + + for (i = 0; i < 6; i++) { + i2c_smbus_write_byte_data(client, + ADM9240_REG_IN_MIN(i), 0); + i2c_smbus_write_byte_data(client, + ADM9240_REG_IN_MAX(i), 255); + } + i2c_smbus_write_byte_data(client, + ADM9240_REG_FAN_MIN(0), 255); + i2c_smbus_write_byte_data(client, + ADM9240_REG_FAN_MIN(1), 255); + i2c_smbus_write_byte_data(client, + ADM9240_REG_TEMP_MAX(0), 127); + i2c_smbus_write_byte_data(client, + ADM9240_REG_TEMP_MAX(1), 127); + + /* start measurement cycle */ + i2c_smbus_write_byte_data(client, ADM9240_REG_CONFIG, 1); + + dev_info(&client->dev, + "cold start: config was 0x%02x mode %u\n", conf, mode); + } +} + +static int adm9240_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct device *dev = &new_client->dev; + struct device *hwmon_dev; + struct adm9240_data *data; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(new_client, data); + data->client = new_client; + mutex_init(&data->update_lock); + + adm9240_init_client(new_client); + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, + new_client->name, + data, + adm9240_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id adm9240_id[] = { + { "adm9240", adm9240 }, + { "ds1780", ds1780 }, + { "lm81", lm81 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm9240_id); + +static struct i2c_driver adm9240_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "adm9240", + }, + .probe = adm9240_probe, + .id_table = adm9240_id, + .detect = adm9240_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(adm9240_driver); + +MODULE_AUTHOR("Michiel Rook <michiel@grendelproject.nl>, " + "Grant Coady <gcoady.lk@gmail.com> and others"); +MODULE_DESCRIPTION("ADM9240/DS1780/LM81 driver"); +MODULE_LICENSE("GPL"); |