diff options
Diffstat (limited to 'drivers/hwmon/adt7475.c')
| -rw-r--r-- | drivers/hwmon/adt7475.c | 1945 |
1 files changed, 1945 insertions, 0 deletions
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c new file mode 100644 index 000000000..0a87c5b51 --- /dev/null +++ b/drivers/hwmon/adt7475.c @@ -0,0 +1,1945 @@ +/* + * adt7475 - Thermal sensor driver for the ADT7475 chip and derivatives + * Copyright (C) 2007-2008, Advanced Micro Devices, Inc. + * Copyright (C) 2008 Jordan Crouse <jordan@cosmicpenguin.net> + * Copyright (C) 2008 Hans de Goede <hdegoede@redhat.com> + * Copyright (C) 2009 Jean Delvare <jdelvare@suse.de> + * + * Derived from the lm83 driver by Jean Delvare + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/hwmon-vid.h> +#include <linux/err.h> +#include <linux/jiffies.h> +#include <linux/util_macros.h> + +/* Indexes for the sysfs hooks */ + +#define INPUT 0 +#define MIN 1 +#define MAX 2 +#define CONTROL 3 +#define OFFSET 3 +#define AUTOMIN 4 +#define THERM 5 +#define HYSTERSIS 6 + +/* + * These are unique identifiers for the sysfs functions - unlike the + * numbers above, these are not also indexes into an array + */ + +#define ALARM 9 +#define FAULT 10 + +/* 7475 Common Registers */ + +#define REG_DEVREV2 0x12 /* ADT7490 only */ + +#define REG_VTT 0x1E /* ADT7490 only */ +#define REG_EXTEND3 0x1F /* ADT7490 only */ + +#define REG_VOLTAGE_BASE 0x20 +#define REG_TEMP_BASE 0x25 +#define REG_TACH_BASE 0x28 +#define REG_PWM_BASE 0x30 +#define REG_PWM_MAX_BASE 0x38 + +#define REG_DEVID 0x3D +#define REG_VENDID 0x3E +#define REG_DEVID2 0x3F + +#define REG_CONFIG1 0x40 + +#define REG_STATUS1 0x41 +#define REG_STATUS2 0x42 + +#define REG_VID 0x43 /* ADT7476 only */ + +#define REG_VOLTAGE_MIN_BASE 0x44 +#define REG_VOLTAGE_MAX_BASE 0x45 + +#define REG_TEMP_MIN_BASE 0x4E +#define REG_TEMP_MAX_BASE 0x4F + +#define REG_TACH_MIN_BASE 0x54 + +#define REG_PWM_CONFIG_BASE 0x5C + +#define REG_TEMP_TRANGE_BASE 0x5F + +#define REG_ENHANCE_ACOUSTICS1 0x62 +#define REG_ENHANCE_ACOUSTICS2 0x63 + +#define REG_PWM_MIN_BASE 0x64 + +#define REG_TEMP_TMIN_BASE 0x67 +#define REG_TEMP_THERM_BASE 0x6A + +#define REG_REMOTE1_HYSTERSIS 0x6D +#define REG_REMOTE2_HYSTERSIS 0x6E + +#define REG_TEMP_OFFSET_BASE 0x70 + +#define REG_CONFIG2 0x73 + +#define REG_EXTEND1 0x76 +#define REG_EXTEND2 0x77 + +#define REG_CONFIG3 0x78 +#define REG_CONFIG5 0x7C +#define REG_CONFIG4 0x7D + +#define REG_STATUS4 0x81 /* ADT7490 only */ + +#define REG_VTT_MIN 0x84 /* ADT7490 only */ +#define REG_VTT_MAX 0x86 /* ADT7490 only */ + +#define VID_VIDSEL 0x80 /* ADT7476 only */ + +#define CONFIG2_ATTN 0x20 + +#define CONFIG3_SMBALERT 0x01 +#define CONFIG3_THERM 0x02 + +#define CONFIG4_PINFUNC 0x03 +#define CONFIG4_MAXDUTY 0x08 +#define CONFIG4_ATTN_IN10 0x30 +#define CONFIG4_ATTN_IN43 0xC0 + +#define CONFIG5_TWOSCOMP 0x01 +#define CONFIG5_TEMPOFFSET 0x02 +#define CONFIG5_VIDGPIO 0x10 /* ADT7476 only */ + +/* ADT7475 Settings */ + +#define ADT7475_VOLTAGE_COUNT 5 /* Not counting Vtt */ +#define ADT7475_TEMP_COUNT 3 +#define ADT7475_TACH_COUNT 4 +#define ADT7475_PWM_COUNT 3 + +/* Macro to read the registers */ + +#define adt7475_read(reg) i2c_smbus_read_byte_data(client, (reg)) + +/* Macros to easily index the registers */ + +#define TACH_REG(idx) (REG_TACH_BASE + ((idx) * 2)) +#define TACH_MIN_REG(idx) (REG_TACH_MIN_BASE + ((idx) * 2)) + +#define PWM_REG(idx) (REG_PWM_BASE + (idx)) +#define PWM_MAX_REG(idx) (REG_PWM_MAX_BASE + (idx)) +#define PWM_MIN_REG(idx) (REG_PWM_MIN_BASE + (idx)) +#define PWM_CONFIG_REG(idx) (REG_PWM_CONFIG_BASE + (idx)) + +#define VOLTAGE_REG(idx) (REG_VOLTAGE_BASE + (idx)) +#define VOLTAGE_MIN_REG(idx) (REG_VOLTAGE_MIN_BASE + ((idx) * 2)) +#define VOLTAGE_MAX_REG(idx) (REG_VOLTAGE_MAX_BASE + ((idx) * 2)) + +#define TEMP_REG(idx) (REG_TEMP_BASE + (idx)) +#define TEMP_MIN_REG(idx) (REG_TEMP_MIN_BASE + ((idx) * 2)) +#define TEMP_MAX_REG(idx) (REG_TEMP_MAX_BASE + ((idx) * 2)) +#define TEMP_TMIN_REG(idx) (REG_TEMP_TMIN_BASE + (idx)) +#define TEMP_THERM_REG(idx) (REG_TEMP_THERM_BASE + (idx)) +#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx)) +#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx)) + +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; + +enum chips { adt7473, adt7475, adt7476, adt7490 }; + +static const struct i2c_device_id adt7475_id[] = { + { "adt7473", adt7473 }, + { "adt7475", adt7475 }, + { "adt7476", adt7476 }, + { "adt7490", adt7490 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adt7475_id); + +static const struct of_device_id adt7475_of_match[] = { + { + .compatible = "adi,adt7473", + .data = (void *)adt7473 + }, + { + .compatible = "adi,adt7475", + .data = (void *)adt7475 + }, + { + .compatible = "adi,adt7476", + .data = (void *)adt7476 + }, + { + .compatible = "adi,adt7490", + .data = (void *)adt7490 + }, + { }, +}; +MODULE_DEVICE_TABLE(of, adt7475_of_match); + +struct adt7475_data { + struct device *hwmon_dev; + struct mutex lock; + + unsigned long measure_updated; + bool valid; + + u8 config4; + u8 config5; + u8 has_voltage; + u8 bypass_attn; /* Bypass voltage attenuator */ + u8 has_pwm2:1; + u8 has_fan4:1; + u8 has_vid:1; + u32 alarms; + u16 voltage[3][6]; + u16 temp[7][3]; + u16 tach[2][4]; + u8 pwm[4][3]; + u8 range[3]; + u8 pwmctl[3]; + u8 pwmchan[3]; + u8 enh_acoustics[2]; + + u8 vid; + u8 vrm; +}; + +static struct i2c_driver adt7475_driver; +static struct adt7475_data *adt7475_update_device(struct device *dev); +static void adt7475_read_hystersis(struct i2c_client *client); +static void adt7475_read_pwm(struct i2c_client *client, int index); + +/* Given a temp value, convert it to register value */ + +static inline u16 temp2reg(struct adt7475_data *data, long val) +{ + u16 ret; + + if (!(data->config5 & CONFIG5_TWOSCOMP)) { + val = clamp_val(val, -64000, 191000); + ret = (val + 64500) / 1000; + } else { + val = clamp_val(val, -128000, 127000); + if (val < -500) + ret = (256500 + val) / 1000; + else + ret = (val + 500) / 1000; + } + + return ret << 2; +} + +/* Given a register value, convert it to a real temp value */ + +static inline int reg2temp(struct adt7475_data *data, u16 reg) +{ + if (data->config5 & CONFIG5_TWOSCOMP) { + if (reg >= 512) + return (reg - 1024) * 250; + else + return reg * 250; + } else + return (reg - 256) * 250; +} + +static inline int tach2rpm(u16 tach) +{ + if (tach == 0 || tach == 0xFFFF) + return 0; + + return (90000 * 60) / tach; +} + +static inline u16 rpm2tach(unsigned long rpm) +{ + if (rpm == 0) + return 0; + + return clamp_val((90000 * 60) / rpm, 1, 0xFFFF); +} + +/* Scaling factors for voltage inputs, taken from the ADT7490 datasheet */ +static const int adt7473_in_scaling[ADT7475_VOLTAGE_COUNT + 1][2] = { + { 45, 94 }, /* +2.5V */ + { 175, 525 }, /* Vccp */ + { 68, 71 }, /* Vcc */ + { 93, 47 }, /* +5V */ + { 120, 20 }, /* +12V */ + { 45, 45 }, /* Vtt */ +}; + +static inline int reg2volt(int channel, u16 reg, u8 bypass_attn) +{ + const int *r = adt7473_in_scaling[channel]; + + if (bypass_attn & (1 << channel)) + return DIV_ROUND_CLOSEST(reg * 2250, 1024); + return DIV_ROUND_CLOSEST(reg * (r[0] + r[1]) * 2250, r[1] * 1024); +} + +static inline u16 volt2reg(int channel, long volt, u8 bypass_attn) +{ + const int *r = adt7473_in_scaling[channel]; + long reg; + + if (bypass_attn & (1 << channel)) + reg = DIV_ROUND_CLOSEST(volt * 1024, 2250); + else + reg = DIV_ROUND_CLOSEST(volt * r[1] * 1024, + (r[0] + r[1]) * 2250); + return clamp_val(reg, 0, 1023) & (0xff << 2); +} + +static int adt7475_read_word(struct i2c_client *client, int reg) +{ + int val1, val2; + + val1 = i2c_smbus_read_byte_data(client, reg); + if (val1 < 0) + return val1; + val2 = i2c_smbus_read_byte_data(client, reg + 1); + if (val2 < 0) + return val2; + + return val1 | (val2 << 8); +} + +static void adt7475_write_word(struct i2c_client *client, int reg, u16 val) +{ + i2c_smbus_write_byte_data(client, reg + 1, val >> 8); + i2c_smbus_write_byte_data(client, reg, val & 0xFF); +} + +static ssize_t show_voltage(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct adt7475_data *data = adt7475_update_device(dev); + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + unsigned short val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + switch (sattr->nr) { + case ALARM: + return sprintf(buf, "%d\n", + (data->alarms >> sattr->index) & 1); + default: + val = data->voltage[sattr->nr][sattr->index]; + return sprintf(buf, "%d\n", + reg2volt(sattr->index, val, data->bypass_attn)); + } +} + +static ssize_t set_voltage(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + unsigned char reg; + long val; + + if (kstrtol(buf, 10, &val)) + return -EINVAL; + + mutex_lock(&data->lock); + + data->voltage[sattr->nr][sattr->index] = + volt2reg(sattr->index, val, data->bypass_attn); + + if (sattr->index < ADT7475_VOLTAGE_COUNT) { + if (sattr->nr == MIN) + reg = VOLTAGE_MIN_REG(sattr->index); + else + reg = VOLTAGE_MAX_REG(sattr->index); + } else { + if (sattr->nr == MIN) + reg = REG_VTT_MIN; + else + reg = REG_VTT_MAX; + } + + i2c_smbus_write_byte_data(client, reg, + data->voltage[sattr->nr][sattr->index] >> 2); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct adt7475_data *data = adt7475_update_device(dev); + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + int out; + + if (IS_ERR(data)) + return PTR_ERR(data); + + switch (sattr->nr) { + case HYSTERSIS: + mutex_lock(&data->lock); + out = data->temp[sattr->nr][sattr->index]; + if (sattr->index != 1) + out = (out >> 4) & 0xF; + else + out = (out & 0xF); + /* + * Show the value as an absolute number tied to + * THERM + */ + out = reg2temp(data, data->temp[THERM][sattr->index]) - + out * 1000; + mutex_unlock(&data->lock); + break; + + case OFFSET: + /* + * Offset is always 2's complement, regardless of the + * setting in CONFIG5 + */ + mutex_lock(&data->lock); + out = (s8)data->temp[sattr->nr][sattr->index]; + if (data->config5 & CONFIG5_TEMPOFFSET) + out *= 1000; + else + out *= 500; + mutex_unlock(&data->lock); + break; + + case ALARM: + out = (data->alarms >> (sattr->index + 4)) & 1; + break; + + case FAULT: + /* Note - only for remote1 and remote2 */ + out = !!(data->alarms & (sattr->index ? 0x8000 : 0x4000)); + break; + + default: + /* All other temp values are in the configured format */ + out = reg2temp(data, data->temp[sattr->nr][sattr->index]); + } + + return sprintf(buf, "%d\n", out); +} + +static ssize_t set_temp(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + unsigned char reg = 0; + u8 out; + int temp; + long val; + + if (kstrtol(buf, 10, &val)) + return -EINVAL; + + mutex_lock(&data->lock); + + /* We need the config register in all cases for temp <-> reg conv. */ + data->config5 = adt7475_read(REG_CONFIG5); + + switch (sattr->nr) { + case OFFSET: + if (data->config5 & CONFIG5_TEMPOFFSET) { + val = clamp_val(val, -63000, 127000); + out = data->temp[OFFSET][sattr->index] = val / 1000; + } else { + val = clamp_val(val, -63000, 64000); + out = data->temp[OFFSET][sattr->index] = val / 500; + } + break; + + case HYSTERSIS: + /* + * The value will be given as an absolute value, turn it + * into an offset based on THERM + */ + + /* Read fresh THERM and HYSTERSIS values from the chip */ + data->temp[THERM][sattr->index] = + adt7475_read(TEMP_THERM_REG(sattr->index)) << 2; + adt7475_read_hystersis(client); + + temp = reg2temp(data, data->temp[THERM][sattr->index]); + val = clamp_val(val, temp - 15000, temp); + val = (temp - val) / 1000; + + if (sattr->index != 1) { + data->temp[HYSTERSIS][sattr->index] &= 0xF0; + data->temp[HYSTERSIS][sattr->index] |= (val & 0xF) << 4; + } else { + data->temp[HYSTERSIS][sattr->index] &= 0x0F; + data->temp[HYSTERSIS][sattr->index] |= (val & 0xF); + } + + out = data->temp[HYSTERSIS][sattr->index]; + break; + + default: + data->temp[sattr->nr][sattr->index] = temp2reg(data, val); + + /* + * We maintain an extra 2 digits of precision for simplicity + * - shift those back off before writing the value + */ + out = (u8) (data->temp[sattr->nr][sattr->index] >> 2); + } + + switch (sattr->nr) { + case MIN: + reg = TEMP_MIN_REG(sattr->index); + break; + case MAX: + reg = TEMP_MAX_REG(sattr->index); + break; + case OFFSET: + reg = TEMP_OFFSET_REG(sattr->index); + break; + case AUTOMIN: + reg = TEMP_TMIN_REG(sattr->index); + break; + case THERM: + reg = TEMP_THERM_REG(sattr->index); + break; + case HYSTERSIS: + if (sattr->index != 2) + reg = REG_REMOTE1_HYSTERSIS; + else + reg = REG_REMOTE2_HYSTERSIS; + + break; + } + + i2c_smbus_write_byte_data(client, reg, out); + + mutex_unlock(&data->lock); + return count; +} + +/* Assuming CONFIG6[SLOW] is 0 */ +static const int ad7475_st_map[] = { + 37500, 18800, 12500, 7500, 4700, 3100, 1600, 800, +}; + +static ssize_t show_temp_st(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + long val; + + switch (sattr->index) { + case 0: + val = data->enh_acoustics[0] & 0xf; + break; + case 1: + val = (data->enh_acoustics[1] >> 4) & 0xf; + break; + case 2: + default: + val = data->enh_acoustics[1] & 0xf; + break; + } + + if (val & 0x8) + return sprintf(buf, "%d\n", ad7475_st_map[val & 0x7]); + else + return sprintf(buf, "0\n"); +} + +static ssize_t set_temp_st(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + unsigned char reg; + int shift, idx; + ulong val; + + if (kstrtoul(buf, 10, &val)) + return -EINVAL; + + switch (sattr->index) { + case 0: + reg = REG_ENHANCE_ACOUSTICS1; + shift = 0; + idx = 0; + break; + case 1: + reg = REG_ENHANCE_ACOUSTICS2; + shift = 0; + idx = 1; + break; + case 2: + default: + reg = REG_ENHANCE_ACOUSTICS2; + shift = 4; + idx = 1; + break; + } + + if (val > 0) { + val = find_closest_descending(val, ad7475_st_map, + ARRAY_SIZE(ad7475_st_map)); + val |= 0x8; + } + + mutex_lock(&data->lock); + + data->enh_acoustics[idx] &= ~(0xf << shift); + data->enh_acoustics[idx] |= (val << shift); + + i2c_smbus_write_byte_data(client, reg, data->enh_acoustics[idx]); + + mutex_unlock(&data->lock); + + return count; +} + +/* + * Table of autorange values - the user will write the value in millidegrees, + * and we'll convert it + */ +static const int autorange_table[] = { + 2000, 2500, 3330, 4000, 5000, 6670, 8000, + 10000, 13330, 16000, 20000, 26670, 32000, 40000, + 53330, 80000 +}; + +static ssize_t show_point2(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct adt7475_data *data = adt7475_update_device(dev); + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + int out, val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + mutex_lock(&data->lock); + out = (data->range[sattr->index] >> 4) & 0x0F; + val = reg2temp(data, data->temp[AUTOMIN][sattr->index]); + mutex_unlock(&data->lock); + + return sprintf(buf, "%d\n", val + autorange_table[out]); +} + +static ssize_t set_point2(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + int temp; + long val; + + if (kstrtol(buf, 10, &val)) + return -EINVAL; + + mutex_lock(&data->lock); + + /* Get a fresh copy of the needed registers */ + data->config5 = adt7475_read(REG_CONFIG5); + data->temp[AUTOMIN][sattr->index] = + adt7475_read(TEMP_TMIN_REG(sattr->index)) << 2; + data->range[sattr->index] = + adt7475_read(TEMP_TRANGE_REG(sattr->index)); + + /* + * The user will write an absolute value, so subtract the start point + * to figure the range + */ + temp = reg2temp(data, data->temp[AUTOMIN][sattr->index]); + val = clamp_val(val, temp + autorange_table[0], + temp + autorange_table[ARRAY_SIZE(autorange_table) - 1]); + val -= temp; + + /* Find the nearest table entry to what the user wrote */ + val = find_closest(val, autorange_table, ARRAY_SIZE(autorange_table)); + + data->range[sattr->index] &= ~0xF0; + data->range[sattr->index] |= val << 4; + + i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index), + data->range[sattr->index]); + + mutex_unlock(&data->lock); + return count; +} + +static ssize_t show_tach(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct adt7475_data *data = adt7475_update_device(dev); + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + int out; + + if (IS_ERR(data)) + return PTR_ERR(data); + + if (sattr->nr == ALARM) + out = (data->alarms >> (sattr->index + 10)) & 1; + else + out = tach2rpm(data->tach[sattr->nr][sattr->index]); + + return sprintf(buf, "%d\n", out); +} + +static ssize_t set_tach(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + unsigned long val; + + if (kstrtoul(buf, 10, &val)) + return -EINVAL; + + mutex_lock(&data->lock); + + data->tach[MIN][sattr->index] = rpm2tach(val); + + adt7475_write_word(client, TACH_MIN_REG(sattr->index), + data->tach[MIN][sattr->index]); + + mutex_unlock(&data->lock); + return count; +} + +static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct adt7475_data *data = adt7475_update_device(dev); + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + if (IS_ERR(data)) + return PTR_ERR(data); + + return sprintf(buf, "%d\n", data->pwm[sattr->nr][sattr->index]); +} + +static ssize_t show_pwmchan(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct adt7475_data *data = adt7475_update_device(dev); + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + if (IS_ERR(data)) + return PTR_ERR(data); + + return sprintf(buf, "%d\n", data->pwmchan[sattr->index]); +} + +static ssize_t show_pwmctrl(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct adt7475_data *data = adt7475_update_device(dev); + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + if (IS_ERR(data)) + return PTR_ERR(data); + + return sprintf(buf, "%d\n", data->pwmctl[sattr->index]); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + unsigned char reg = 0; + long val; + + if (kstrtol(buf, 10, &val)) + return -EINVAL; + + mutex_lock(&data->lock); + + switch (sattr->nr) { + case INPUT: + /* Get a fresh value for CONTROL */ + data->pwm[CONTROL][sattr->index] = + adt7475_read(PWM_CONFIG_REG(sattr->index)); + + /* + * If we are not in manual mode, then we shouldn't allow + * the user to set the pwm speed + */ + if (((data->pwm[CONTROL][sattr->index] >> 5) & 7) != 7) { + mutex_unlock(&data->lock); + return count; + } + + reg = PWM_REG(sattr->index); + break; + + case MIN: + reg = PWM_MIN_REG(sattr->index); + break; + + case MAX: + reg = PWM_MAX_REG(sattr->index); + break; + } + + data->pwm[sattr->nr][sattr->index] = clamp_val(val, 0, 0xFF); + i2c_smbus_write_byte_data(client, reg, + data->pwm[sattr->nr][sattr->index]); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_stall_disable(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + u8 mask = BIT(5 + sattr->index); + + return sprintf(buf, "%d\n", !!(data->enh_acoustics[0] & mask)); +} + +static ssize_t set_stall_disable(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + long val; + u8 mask = BIT(5 + sattr->index); + + if (kstrtol(buf, 10, &val)) + return -EINVAL; + + mutex_lock(&data->lock); + + data->enh_acoustics[0] &= ~mask; + if (val) + data->enh_acoustics[0] |= mask; + + i2c_smbus_write_byte_data(client, REG_ENHANCE_ACOUSTICS1, + data->enh_acoustics[0]); + + mutex_unlock(&data->lock); + + return count; +} + +/* Called by set_pwmctrl and set_pwmchan */ + +static int hw_set_pwm(struct i2c_client *client, int index, + unsigned int pwmctl, unsigned int pwmchan) +{ + struct adt7475_data *data = i2c_get_clientdata(client); + long val = 0; + + switch (pwmctl) { + case 0: + val = 0x03; /* Run at full speed */ + break; + case 1: + val = 0x07; /* Manual mode */ + break; + case 2: + switch (pwmchan) { + case 1: + /* Remote1 controls PWM */ + val = 0x00; + break; + case 2: + /* local controls PWM */ + val = 0x01; + break; + case 4: + /* remote2 controls PWM */ + val = 0x02; + break; + case 6: + /* local/remote2 control PWM */ + val = 0x05; + break; + case 7: + /* All three control PWM */ + val = 0x06; + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + data->pwmctl[index] = pwmctl; + data->pwmchan[index] = pwmchan; + + data->pwm[CONTROL][index] &= ~0xE0; + data->pwm[CONTROL][index] |= (val & 7) << 5; + + i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index), + data->pwm[CONTROL][index]); + + return 0; +} + +static ssize_t set_pwmchan(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + int r; + long val; + + if (kstrtol(buf, 10, &val)) + return -EINVAL; + + mutex_lock(&data->lock); + /* Read Modify Write PWM values */ + adt7475_read_pwm(client, sattr->index); + r = hw_set_pwm(client, sattr->index, data->pwmctl[sattr->index], val); + if (r) + count = r; + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t set_pwmctrl(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + int r; + long val; + + if (kstrtol(buf, 10, &val)) + return -EINVAL; + + mutex_lock(&data->lock); + /* Read Modify Write PWM values */ + adt7475_read_pwm(client, sattr->index); + r = hw_set_pwm(client, sattr->index, val, data->pwmchan[sattr->index]); + if (r) + count = r; + mutex_unlock(&data->lock); + + return count; +} + +/* List of frequencies for the PWM */ +static const int pwmfreq_table[] = { + 11, 14, 22, 29, 35, 44, 58, 88, 22500 +}; + +static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct adt7475_data *data = adt7475_update_device(dev); + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + int idx; + + if (IS_ERR(data)) + return PTR_ERR(data); + idx = clamp_val(data->range[sattr->index] & 0xf, 0, + ARRAY_SIZE(pwmfreq_table) - 1); + + return sprintf(buf, "%d\n", pwmfreq_table[idx]); +} + +static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + int out; + long val; + + if (kstrtol(buf, 10, &val)) + return -EINVAL; + + out = find_closest(val, pwmfreq_table, ARRAY_SIZE(pwmfreq_table)); + + mutex_lock(&data->lock); + + data->range[sattr->index] = + adt7475_read(TEMP_TRANGE_REG(sattr->index)); + data->range[sattr->index] &= ~0xf; + data->range[sattr->index] |= out; + + i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index), + data->range[sattr->index]); + + mutex_unlock(&data->lock); + return count; +} + +static ssize_t pwm_use_point2_pwm_at_crit_show(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7475_data *data = adt7475_update_device(dev); + + if (IS_ERR(data)) + return PTR_ERR(data); + + return sprintf(buf, "%d\n", !!(data->config4 & CONFIG4_MAXDUTY)); +} + +static ssize_t pwm_use_point2_pwm_at_crit_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + long val; + + if (kstrtol(buf, 10, &val)) + return -EINVAL; + if (val != 0 && val != 1) + return -EINVAL; + + mutex_lock(&data->lock); + data->config4 = i2c_smbus_read_byte_data(client, REG_CONFIG4); + if (val) + data->config4 |= CONFIG4_MAXDUTY; + else + data->config4 &= ~CONFIG4_MAXDUTY; + i2c_smbus_write_byte_data(client, REG_CONFIG4, data->config4); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t vrm_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct adt7475_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", (int)data->vrm); +} + +static ssize_t vrm_store(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct adt7475_data *data = dev_get_drvdata(dev); + long val; + + if (kstrtol(buf, 10, &val)) + return -EINVAL; + if (val < 0 || val > 255) + return -EINVAL; + data->vrm = val; + + return count; +} + +static ssize_t cpu0_vid_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct adt7475_data *data = adt7475_update_device(dev); + + if (IS_ERR(data)) + return PTR_ERR(data); + + return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); +} + +static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_voltage, NULL, INPUT, 0); +static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MAX, 0); +static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MIN, 0); +static SENSOR_DEVICE_ATTR_2(in0_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0); +static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 1); +static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MAX, 1); +static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MIN, 1); +static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1); +static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 2); +static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MAX, 2); +static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MIN, 2); +static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 2); +static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_voltage, NULL, INPUT, 3); +static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MAX, 3); +static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MIN, 3); +static SENSOR_DEVICE_ATTR_2(in3_alarm, S_IRUGO, show_voltage, NULL, ALARM, 3); +static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_voltage, NULL, INPUT, 4); +static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MAX, 4); +static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MIN, 4); +static SENSOR_DEVICE_ATTR_2(in4_alarm, S_IRUGO, show_voltage, NULL, ALARM, 8); +static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_voltage, NULL, INPUT, 5); +static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MAX, 5); +static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MIN, 5); +static SENSOR_DEVICE_ATTR_2(in5_alarm, S_IRUGO, show_voltage, NULL, ALARM, 31); +static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, INPUT, 0); +static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, show_temp, NULL, ALARM, 0); +static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_temp, NULL, FAULT, 0); +static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp, + MAX, 0); +static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp, + MIN, 0); +static SENSOR_DEVICE_ATTR_2(temp1_offset, S_IRUGO | S_IWUSR, show_temp, + set_temp, OFFSET, 0); +static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO | S_IWUSR, + show_temp, set_temp, AUTOMIN, 0); +static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IRUGO | S_IWUSR, + show_point2, set_point2, 0, 0); +static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp, set_temp, + THERM, 0); +static SENSOR_DEVICE_ATTR_2(temp1_crit_hyst, S_IRUGO | S_IWUSR, show_temp, + set_temp, HYSTERSIS, 0); +static SENSOR_DEVICE_ATTR_2(temp1_smoothing, S_IRUGO | S_IWUSR, show_temp_st, + set_temp_st, 0, 0); +static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, INPUT, 1); +static SENSOR_DEVICE_ATTR_2(temp2_alarm, S_IRUGO, show_temp, NULL, ALARM, 1); +static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp, + MAX, 1); +static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp, + MIN, 1); +static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IRUGO | S_IWUSR, show_temp, + set_temp, OFFSET, 1); +static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IRUGO | S_IWUSR, + show_temp, set_temp, AUTOMIN, 1); +static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IRUGO | S_IWUSR, + show_point2, set_point2, 0, 1); +static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp, set_temp, + THERM, 1); +static SENSOR_DEVICE_ATTR_2(temp2_crit_hyst, S_IRUGO | S_IWUSR, show_temp, + set_temp, HYSTERSIS, 1); +static SENSOR_DEVICE_ATTR_2(temp2_smoothing, S_IRUGO | S_IWUSR, show_temp_st, + set_temp_st, 0, 1); +static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, INPUT, 2); +static SENSOR_DEVICE_ATTR_2(temp3_alarm, S_IRUGO, show_temp, NULL, ALARM, 2); +static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_temp, NULL, FAULT, 2); +static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp, + MAX, 2); +static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp, + MIN, 2); +static SENSOR_DEVICE_ATTR_2(temp3_offset, S_IRUGO | S_IWUSR, show_temp, + set_temp, OFFSET, 2); +static SENSOR_DEVICE_ATTR_2(temp3_auto_point1_temp, S_IRUGO | S_IWUSR, + show_temp, set_temp, AUTOMIN, 2); +static SENSOR_DEVICE_ATTR_2(temp3_auto_point2_temp, S_IRUGO | S_IWUSR, + show_point2, set_point2, 0, 2); +static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp, set_temp, + THERM, 2); +static SENSOR_DEVICE_ATTR_2(temp3_crit_hyst, S_IRUGO | S_IWUSR, show_temp, + set_temp, HYSTERSIS, 2); +static SENSOR_DEVICE_ATTR_2(temp3_smoothing, S_IRUGO | S_IWUSR, show_temp_st, + set_temp_st, 0, 2); +static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_tach, NULL, INPUT, 0); +static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_tach, set_tach, + MIN, 0); +static SENSOR_DEVICE_ATTR_2(fan1_alarm, S_IRUGO, show_tach, NULL, ALARM, 0); +static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_tach, NULL, INPUT, 1); +static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_tach, set_tach, + MIN, 1); +static SENSOR_DEVICE_ATTR_2(fan2_alarm, S_IRUGO, show_tach, NULL, ALARM, 1); +static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_tach, NULL, INPUT, 2); +static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_tach, set_tach, + MIN, 2); +static SENSOR_DEVICE_ATTR_2(fan3_alarm, S_IRUGO, show_tach, NULL, ALARM, 2); +static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_tach, NULL, INPUT, 3); +static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_tach, set_tach, + MIN, 3); +static SENSOR_DEVICE_ATTR_2(fan4_alarm, S_IRUGO, show_tach, NULL, ALARM, 3); +static SENSOR_DEVICE_ATTR_2(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT, + 0); +static SENSOR_DEVICE_ATTR_2(pwm1_freq, S_IRUGO | S_IWUSR, show_pwmfreq, + set_pwmfreq, INPUT, 0); +static SENSOR_DEVICE_ATTR_2(pwm1_enable, S_IRUGO | S_IWUSR, show_pwmctrl, + set_pwmctrl, INPUT, 0); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_channels_temp, S_IRUGO | S_IWUSR, + show_pwmchan, set_pwmchan, INPUT, 0); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm, + set_pwm, MIN, 0); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm, + set_pwm, MAX, 0); +static SENSOR_DEVICE_ATTR_2(pwm1_stall_disable, S_IRUGO | S_IWUSR, + show_stall_disable, set_stall_disable, 0, 0); +static SENSOR_DEVICE_ATTR_2(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT, + 1); +static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq, + set_pwmfreq, INPUT, 1); +static SENSOR_DEVICE_ATTR_2(pwm2_enable, S_IRUGO | S_IWUSR, show_pwmctrl, + set_pwmctrl, INPUT, 1); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_channels_temp, S_IRUGO | S_IWUSR, + show_pwmchan, set_pwmchan, INPUT, 1); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm, + set_pwm, MIN, 1); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm, + set_pwm, MAX, 1); +static SENSOR_DEVICE_ATTR_2(pwm2_stall_disable, S_IRUGO | S_IWUSR, + show_stall_disable, set_stall_disable, 0, 1); +static SENSOR_DEVICE_ATTR_2(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT, + 2); +static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq, + set_pwmfreq, INPUT, 2); +static SENSOR_DEVICE_ATTR_2(pwm3_enable, S_IRUGO | S_IWUSR, show_pwmctrl, + set_pwmctrl, INPUT, 2); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_channels_temp, S_IRUGO | S_IWUSR, + show_pwmchan, set_pwmchan, INPUT, 2); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm, + set_pwm, MIN, 2); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm, + set_pwm, MAX, 2); +static SENSOR_DEVICE_ATTR_2(pwm3_stall_disable, S_IRUGO | S_IWUSR, + show_stall_disable, set_stall_disable, 0, 2); + +/* Non-standard name, might need revisiting */ +static DEVICE_ATTR_RW(pwm_use_point2_pwm_at_crit); + +static DEVICE_ATTR_RW(vrm); +static DEVICE_ATTR_RO(cpu0_vid); + +static struct attribute *adt7475_attrs[] = { + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_fault.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_offset.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, + &sensor_dev_attr_temp1_smoothing.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_smoothing.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_fault.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp3_crit.dev_attr.attr, + &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_smoothing.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm1_freq.dev_attr.attr, + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_stall_disable.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm3_freq.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_stall_disable.dev_attr.attr, + &dev_attr_pwm_use_point2_pwm_at_crit.attr, + NULL, +}; + +static struct attribute *fan4_attrs[] = { + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + NULL +}; + +static struct attribute *pwm2_attrs[] = { + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm2_freq.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_stall_disable.dev_attr.attr, + NULL +}; + +static struct attribute *in0_attrs[] = { + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in0_alarm.dev_attr.attr, + NULL +}; + +static struct attribute *in3_attrs[] = { + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + NULL +}; + +static struct attribute *in4_attrs[] = { + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + NULL +}; + +static struct attribute *in5_attrs[] = { + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + NULL +}; + +static struct attribute *vid_attrs[] = { + &dev_attr_cpu0_vid.attr, + &dev_attr_vrm.attr, + NULL +}; + +static const struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs }; +static const struct attribute_group fan4_attr_group = { .attrs = fan4_attrs }; +static const struct attribute_group pwm2_attr_group = { .attrs = pwm2_attrs }; +static const struct attribute_group in0_attr_group = { .attrs = in0_attrs }; +static const struct attribute_group in3_attr_group = { .attrs = in3_attrs }; +static const struct attribute_group in4_attr_group = { .attrs = in4_attrs }; +static const struct attribute_group in5_attr_group = { .attrs = in5_attrs }; +static const struct attribute_group vid_attr_group = { .attrs = vid_attrs }; + +static int adt7475_detect(struct i2c_client *client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + int vendid, devid, devid2; + const char *name; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + vendid = adt7475_read(REG_VENDID); + devid2 = adt7475_read(REG_DEVID2); + if (vendid != 0x41 || /* Analog Devices */ + (devid2 & 0xf8) != 0x68) + return -ENODEV; + + devid = adt7475_read(REG_DEVID); + if (devid == 0x73) + name = "adt7473"; + else if (devid == 0x75 && client->addr == 0x2e) + name = "adt7475"; + else if (devid == 0x76) + name = "adt7476"; + else if ((devid2 & 0xfc) == 0x6c) + name = "adt7490"; + else { + dev_dbg(&adapter->dev, + "Couldn't detect an ADT7473/75/76/90 part at " + "0x%02x\n", (unsigned int)client->addr); + return -ENODEV; + } + + strlcpy(info->type, name, I2C_NAME_SIZE); + + return 0; +} + +static void adt7475_remove_files(struct i2c_client *client, + struct adt7475_data *data) +{ + sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group); + if (data->has_fan4) + sysfs_remove_group(&client->dev.kobj, &fan4_attr_group); + if (data->has_pwm2) + sysfs_remove_group(&client->dev.kobj, &pwm2_attr_group); + if (data->has_voltage & (1 << 0)) + sysfs_remove_group(&client->dev.kobj, &in0_attr_group); + if (data->has_voltage & (1 << 3)) + sysfs_remove_group(&client->dev.kobj, &in3_attr_group); + if (data->has_voltage & (1 << 4)) + sysfs_remove_group(&client->dev.kobj, &in4_attr_group); + if (data->has_voltage & (1 << 5)) + sysfs_remove_group(&client->dev.kobj, &in5_attr_group); + if (data->has_vid) + sysfs_remove_group(&client->dev.kobj, &vid_attr_group); +} + +static int adt7475_update_limits(struct i2c_client *client) +{ + struct adt7475_data *data = i2c_get_clientdata(client); + int i; + int ret; + + ret = adt7475_read(REG_CONFIG4); + if (ret < 0) + return ret; + data->config4 = ret; + + ret = adt7475_read(REG_CONFIG5); + if (ret < 0) + return ret; + data->config5 = ret; + + for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) { + if (!(data->has_voltage & (1 << i))) + continue; + /* Adjust values so they match the input precision */ + ret = adt7475_read(VOLTAGE_MIN_REG(i)); + if (ret < 0) + return ret; + data->voltage[MIN][i] = ret << 2; + + ret = adt7475_read(VOLTAGE_MAX_REG(i)); + if (ret < 0) + return ret; + data->voltage[MAX][i] = ret << 2; + } + + if (data->has_voltage & (1 << 5)) { + ret = adt7475_read(REG_VTT_MIN); + if (ret < 0) + return ret; + data->voltage[MIN][5] = ret << 2; + + ret = adt7475_read(REG_VTT_MAX); + if (ret < 0) + return ret; + data->voltage[MAX][5] = ret << 2; + } + + for (i = 0; i < ADT7475_TEMP_COUNT; i++) { + /* Adjust values so they match the input precision */ + ret = adt7475_read(TEMP_MIN_REG(i)); + if (ret < 0) + return ret; + data->temp[MIN][i] = ret << 2; + + ret = adt7475_read(TEMP_MAX_REG(i)); + if (ret < 0) + return ret; + data->temp[MAX][i] = ret << 2; + + ret = adt7475_read(TEMP_TMIN_REG(i)); + if (ret < 0) + return ret; + data->temp[AUTOMIN][i] = ret << 2; + + ret = adt7475_read(TEMP_THERM_REG(i)); + if (ret < 0) + return ret; + data->temp[THERM][i] = ret << 2; + + ret = adt7475_read(TEMP_OFFSET_REG(i)); + if (ret < 0) + return ret; + data->temp[OFFSET][i] = ret; + } + adt7475_read_hystersis(client); + + for (i = 0; i < ADT7475_TACH_COUNT; i++) { + if (i == 3 && !data->has_fan4) + continue; + ret = adt7475_read_word(client, TACH_MIN_REG(i)); + if (ret < 0) + return ret; + data->tach[MIN][i] = ret; + } + + for (i = 0; i < ADT7475_PWM_COUNT; i++) { + if (i == 1 && !data->has_pwm2) + continue; + ret = adt7475_read(PWM_MAX_REG(i)); + if (ret < 0) + return ret; + data->pwm[MAX][i] = ret; + + ret = adt7475_read(PWM_MIN_REG(i)); + if (ret < 0) + return ret; + data->pwm[MIN][i] = ret; + /* Set the channel and control information */ + adt7475_read_pwm(client, i); + } + + ret = adt7475_read(TEMP_TRANGE_REG(0)); + if (ret < 0) + return ret; + data->range[0] = ret; + + ret = adt7475_read(TEMP_TRANGE_REG(1)); + if (ret < 0) + return ret; + data->range[1] = ret; + + ret = adt7475_read(TEMP_TRANGE_REG(2)); + if (ret < 0) + return ret; + data->range[2] = ret; + + return 0; +} + +static int adt7475_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + enum chips chip; + static const char * const names[] = { + [adt7473] = "ADT7473", + [adt7475] = "ADT7475", + [adt7476] = "ADT7476", + [adt7490] = "ADT7490", + }; + + struct adt7475_data *data; + int i, ret = 0, revision; + u8 config2, config3; + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + mutex_init(&data->lock); + i2c_set_clientdata(client, data); + + if (client->dev.of_node) + chip = (enum chips)of_device_get_match_data(&client->dev); + else + chip = id->driver_data; + + /* Initialize device-specific values */ + switch (chip) { + case adt7476: + data->has_voltage = 0x0e; /* in1 to in3 */ + revision = adt7475_read(REG_DEVID2) & 0x07; + break; + case adt7490: + data->has_voltage = 0x3e; /* in1 to in5 */ + revision = adt7475_read(REG_DEVID2) & 0x03; + if (revision == 0x03) + revision += adt7475_read(REG_DEVREV2); + break; + default: + data->has_voltage = 0x06; /* in1, in2 */ + revision = adt7475_read(REG_DEVID2) & 0x07; + } + + config3 = adt7475_read(REG_CONFIG3); + /* Pin PWM2 may alternatively be used for ALERT output */ + if (!(config3 & CONFIG3_SMBALERT)) + data->has_pwm2 = 1; + /* Meaning of this bit is inverted for the ADT7473-1 */ + if (id->driver_data == adt7473 && revision >= 1) + data->has_pwm2 = !data->has_pwm2; + + data->config4 = adt7475_read(REG_CONFIG4); + /* Pin TACH4 may alternatively be used for THERM */ + if ((data->config4 & CONFIG4_PINFUNC) == 0x0) + data->has_fan4 = 1; + + /* + * THERM configuration is more complex on the ADT7476 and ADT7490, + * because 2 different pins (TACH4 and +2.5 Vin) can be used for + * this function + */ + if (id->driver_data == adt7490) { + if ((data->config4 & CONFIG4_PINFUNC) == 0x1 && + !(config3 & CONFIG3_THERM)) + data->has_fan4 = 1; + } + if (id->driver_data == adt7476 || id->driver_data == adt7490) { + if (!(config3 & CONFIG3_THERM) || + (data->config4 & CONFIG4_PINFUNC) == 0x1) + data->has_voltage |= (1 << 0); /* in0 */ + } + + /* + * On the ADT7476, the +12V input pin may instead be used as VID5, + * and VID pins may alternatively be used as GPIO + */ + if (id->driver_data == adt7476) { + u8 vid = adt7475_read(REG_VID); + if (!(vid & VID_VIDSEL)) + data->has_voltage |= (1 << 4); /* in4 */ + + data->has_vid = !(adt7475_read(REG_CONFIG5) & CONFIG5_VIDGPIO); + } + + /* Voltage attenuators can be bypassed, globally or individually */ + config2 = adt7475_read(REG_CONFIG2); + if (config2 & CONFIG2_ATTN) { + data->bypass_attn = (0x3 << 3) | 0x3; + } else { + data->bypass_attn = ((data->config4 & CONFIG4_ATTN_IN10) >> 4) | + ((data->config4 & CONFIG4_ATTN_IN43) >> 3); + } + data->bypass_attn &= data->has_voltage; + + /* + * Call adt7475_read_pwm for all pwm's as this will reprogram any + * pwm's which are disabled to manual mode with 0% duty cycle + */ + for (i = 0; i < ADT7475_PWM_COUNT; i++) + adt7475_read_pwm(client, i); + + /* Start monitoring */ + switch (chip) { + case adt7475: + case adt7476: + i2c_smbus_write_byte_data(client, REG_CONFIG1, + adt7475_read(REG_CONFIG1) | 0x01); + break; + default: + break; + } + + ret = sysfs_create_group(&client->dev.kobj, &adt7475_attr_group); + if (ret) + return ret; + + /* Features that can be disabled individually */ + if (data->has_fan4) { + ret = sysfs_create_group(&client->dev.kobj, &fan4_attr_group); + if (ret) + goto eremove; + } + if (data->has_pwm2) { + ret = sysfs_create_group(&client->dev.kobj, &pwm2_attr_group); + if (ret) + goto eremove; + } + if (data->has_voltage & (1 << 0)) { + ret = sysfs_create_group(&client->dev.kobj, &in0_attr_group); + if (ret) + goto eremove; + } + if (data->has_voltage & (1 << 3)) { + ret = sysfs_create_group(&client->dev.kobj, &in3_attr_group); + if (ret) + goto eremove; + } + if (data->has_voltage & (1 << 4)) { + ret = sysfs_create_group(&client->dev.kobj, &in4_attr_group); + if (ret) + goto eremove; + } + if (data->has_voltage & (1 << 5)) { + ret = sysfs_create_group(&client->dev.kobj, &in5_attr_group); + if (ret) + goto eremove; + } + if (data->has_vid) { + data->vrm = vid_which_vrm(); + ret = sysfs_create_group(&client->dev.kobj, &vid_attr_group); + if (ret) + goto eremove; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + ret = PTR_ERR(data->hwmon_dev); + goto eremove; + } + + dev_info(&client->dev, "%s device, revision %d\n", + names[id->driver_data], revision); + if ((data->has_voltage & 0x11) || data->has_fan4 || data->has_pwm2) + dev_info(&client->dev, "Optional features:%s%s%s%s%s\n", + (data->has_voltage & (1 << 0)) ? " in0" : "", + (data->has_voltage & (1 << 4)) ? " in4" : "", + data->has_fan4 ? " fan4" : "", + data->has_pwm2 ? " pwm2" : "", + data->has_vid ? " vid" : ""); + if (data->bypass_attn) + dev_info(&client->dev, "Bypassing attenuators on:%s%s%s%s\n", + (data->bypass_attn & (1 << 0)) ? " in0" : "", + (data->bypass_attn & (1 << 1)) ? " in1" : "", + (data->bypass_attn & (1 << 3)) ? " in3" : "", + (data->bypass_attn & (1 << 4)) ? " in4" : ""); + + /* Limits and settings, should never change update more than once */ + ret = adt7475_update_limits(client); + if (ret) + goto eremove; + + return 0; + +eremove: + adt7475_remove_files(client, data); + return ret; +} + +static int adt7475_remove(struct i2c_client *client) +{ + struct adt7475_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + adt7475_remove_files(client, data); + + return 0; +} + +static struct i2c_driver adt7475_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "adt7475", + .of_match_table = of_match_ptr(adt7475_of_match), + }, + .probe = adt7475_probe, + .remove = adt7475_remove, + .id_table = adt7475_id, + .detect = adt7475_detect, + .address_list = normal_i2c, +}; + +static void adt7475_read_hystersis(struct i2c_client *client) +{ + struct adt7475_data *data = i2c_get_clientdata(client); + + data->temp[HYSTERSIS][0] = (u16) adt7475_read(REG_REMOTE1_HYSTERSIS); + data->temp[HYSTERSIS][1] = data->temp[HYSTERSIS][0]; + data->temp[HYSTERSIS][2] = (u16) adt7475_read(REG_REMOTE2_HYSTERSIS); +} + +static void adt7475_read_pwm(struct i2c_client *client, int index) +{ + struct adt7475_data *data = i2c_get_clientdata(client); + unsigned int v; + + data->pwm[CONTROL][index] = adt7475_read(PWM_CONFIG_REG(index)); + + /* + * Figure out the internal value for pwmctrl and pwmchan + * based on the current settings + */ + v = (data->pwm[CONTROL][index] >> 5) & 7; + + if (v == 3) + data->pwmctl[index] = 0; + else if (v == 7) + data->pwmctl[index] = 1; + else if (v == 4) { + /* + * The fan is disabled - we don't want to + * support that, so change to manual mode and + * set the duty cycle to 0 instead + */ + data->pwm[INPUT][index] = 0; + data->pwm[CONTROL][index] &= ~0xE0; + data->pwm[CONTROL][index] |= (7 << 5); + + i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index), + data->pwm[INPUT][index]); + + i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index), + data->pwm[CONTROL][index]); + + data->pwmctl[index] = 1; + } else { + data->pwmctl[index] = 2; + + switch (v) { + case 0: + data->pwmchan[index] = 1; + break; + case 1: + data->pwmchan[index] = 2; + break; + case 2: + data->pwmchan[index] = 4; + break; + case 5: + data->pwmchan[index] = 6; + break; + case 6: + data->pwmchan[index] = 7; + break; + } + } +} + +static int adt7475_update_measure(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + u16 ext; + int i; + int ret; + + ret = adt7475_read(REG_STATUS2); + if (ret < 0) + return ret; + data->alarms = ret << 8; + + ret = adt7475_read(REG_STATUS1); + if (ret < 0) + return ret; + data->alarms |= ret; + + ret = adt7475_read(REG_EXTEND2); + if (ret < 0) + return ret; + + ext = (ret << 8); + + ret = adt7475_read(REG_EXTEND1); + if (ret < 0) + return ret; + + ext |= ret; + + for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) { + if (!(data->has_voltage & (1 << i))) + continue; + ret = adt7475_read(VOLTAGE_REG(i)); + if (ret < 0) + return ret; + data->voltage[INPUT][i] = + (ret << 2) | + ((ext >> (i * 2)) & 3); + } + + for (i = 0; i < ADT7475_TEMP_COUNT; i++) { + ret = adt7475_read(TEMP_REG(i)); + if (ret < 0) + return ret; + data->temp[INPUT][i] = + (ret << 2) | + ((ext >> ((i + 5) * 2)) & 3); + } + + if (data->has_voltage & (1 << 5)) { + ret = adt7475_read(REG_STATUS4); + if (ret < 0) + return ret; + data->alarms |= ret << 24; + + ret = adt7475_read(REG_EXTEND3); + if (ret < 0) + return ret; + ext = ret; + + ret = adt7475_read(REG_VTT); + if (ret < 0) + return ret; + data->voltage[INPUT][5] = ret << 2 | + ((ext >> 4) & 3); + } + + for (i = 0; i < ADT7475_TACH_COUNT; i++) { + if (i == 3 && !data->has_fan4) + continue; + ret = adt7475_read_word(client, TACH_REG(i)); + if (ret < 0) + return ret; + data->tach[INPUT][i] = ret; + } + + /* Updated by hw when in auto mode */ + for (i = 0; i < ADT7475_PWM_COUNT; i++) { + if (i == 1 && !data->has_pwm2) + continue; + ret = adt7475_read(PWM_REG(i)); + if (ret < 0) + return ret; + data->pwm[INPUT][i] = ret; + } + + if (data->has_vid) { + ret = adt7475_read(REG_VID); + if (ret < 0) + return ret; + data->vid = ret & 0x3f; + } + + return 0; +} + +static struct adt7475_data *adt7475_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + int ret; + + mutex_lock(&data->lock); + + /* Measurement values update every 2 seconds */ + if (time_after(jiffies, data->measure_updated + HZ * 2) || + !data->valid) { + ret = adt7475_update_measure(dev); + if (ret) { + data->valid = false; + mutex_unlock(&data->lock); + return ERR_PTR(ret); + } + data->measure_updated = jiffies; + data->valid = true; + } + + mutex_unlock(&data->lock); + + return data; +} + +module_i2c_driver(adt7475_driver); + +MODULE_AUTHOR("Advanced Micro Devices, Inc"); +MODULE_DESCRIPTION("adt7475 driver"); +MODULE_LICENSE("GPL"); |