summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/jc42.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/jc42.c')
-rw-r--r--drivers/hwmon/jc42.c616
1 files changed, 616 insertions, 0 deletions
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
new file mode 100644
index 000000000..b6e5aaa54
--- /dev/null
+++ b/drivers/hwmon/jc42.c
@@ -0,0 +1,616 @@
+/*
+ * jc42.c - driver for Jedec JC42.4 compliant temperature sensors
+ *
+ * Copyright (c) 2010 Ericsson AB.
+ *
+ * Derived from lm77.c by Andras BALI <drewie@freemail.hu>.
+ *
+ * JC42.4 compliant temperature sensors are typically used on memory modules.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = {
+ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, I2C_CLIENT_END };
+
+/* JC42 registers. All registers are 16 bit. */
+#define JC42_REG_CAP 0x00
+#define JC42_REG_CONFIG 0x01
+#define JC42_REG_TEMP_UPPER 0x02
+#define JC42_REG_TEMP_LOWER 0x03
+#define JC42_REG_TEMP_CRITICAL 0x04
+#define JC42_REG_TEMP 0x05
+#define JC42_REG_MANID 0x06
+#define JC42_REG_DEVICEID 0x07
+#define JC42_REG_SMBUS 0x22 /* NXP and Atmel, possibly others? */
+
+/* Status bits in temperature register */
+#define JC42_ALARM_CRIT_BIT 15
+#define JC42_ALARM_MAX_BIT 14
+#define JC42_ALARM_MIN_BIT 13
+
+/* Configuration register defines */
+#define JC42_CFG_CRIT_ONLY (1 << 2)
+#define JC42_CFG_TCRIT_LOCK (1 << 6)
+#define JC42_CFG_EVENT_LOCK (1 << 7)
+#define JC42_CFG_SHUTDOWN (1 << 8)
+#define JC42_CFG_HYST_SHIFT 9
+#define JC42_CFG_HYST_MASK (0x03 << 9)
+
+/* Capabilities */
+#define JC42_CAP_RANGE (1 << 2)
+
+/* Manufacturer IDs */
+#define ADT_MANID 0x11d4 /* Analog Devices */
+#define ATMEL_MANID 0x001f /* Atmel */
+#define ATMEL_MANID2 0x1114 /* Atmel */
+#define MAX_MANID 0x004d /* Maxim */
+#define IDT_MANID 0x00b3 /* IDT */
+#define MCP_MANID 0x0054 /* Microchip */
+#define NXP_MANID 0x1131 /* NXP Semiconductors */
+#define ONS_MANID 0x1b09 /* ON Semiconductor */
+#define STM_MANID 0x104a /* ST Microelectronics */
+#define GT_MANID 0x1c68 /* Giantec */
+#define GT_MANID2 0x132d /* Giantec, 2nd mfg ID */
+
+/* SMBUS register */
+#define SMBUS_STMOUT BIT(7) /* SMBus time-out, active low */
+
+/* Supported chips */
+
+/* Analog Devices */
+#define ADT7408_DEVID 0x0801
+#define ADT7408_DEVID_MASK 0xffff
+
+/* Atmel */
+#define AT30TS00_DEVID 0x8201
+#define AT30TS00_DEVID_MASK 0xffff
+
+#define AT30TSE004_DEVID 0x2200
+#define AT30TSE004_DEVID_MASK 0xffff
+
+/* Giantec */
+#define GT30TS00_DEVID 0x2200
+#define GT30TS00_DEVID_MASK 0xff00
+
+#define GT34TS02_DEVID 0x3300
+#define GT34TS02_DEVID_MASK 0xff00
+
+/* IDT */
+#define TSE2004_DEVID 0x2200
+#define TSE2004_DEVID_MASK 0xff00
+
+#define TS3000_DEVID 0x2900 /* Also matches TSE2002 */
+#define TS3000_DEVID_MASK 0xff00
+
+#define TS3001_DEVID 0x3000
+#define TS3001_DEVID_MASK 0xff00
+
+/* Maxim */
+#define MAX6604_DEVID 0x3e00
+#define MAX6604_DEVID_MASK 0xffff
+
+/* Microchip */
+#define MCP9804_DEVID 0x0200
+#define MCP9804_DEVID_MASK 0xfffc
+
+#define MCP9808_DEVID 0x0400
+#define MCP9808_DEVID_MASK 0xfffc
+
+#define MCP98242_DEVID 0x2000
+#define MCP98242_DEVID_MASK 0xfffc
+
+#define MCP98243_DEVID 0x2100
+#define MCP98243_DEVID_MASK 0xfffc
+
+#define MCP98244_DEVID 0x2200
+#define MCP98244_DEVID_MASK 0xfffc
+
+#define MCP9843_DEVID 0x0000 /* Also matches mcp9805 */
+#define MCP9843_DEVID_MASK 0xfffe
+
+/* NXP */
+#define SE97_DEVID 0xa200
+#define SE97_DEVID_MASK 0xfffc
+
+#define SE98_DEVID 0xa100
+#define SE98_DEVID_MASK 0xfffc
+
+/* ON Semiconductor */
+#define CAT6095_DEVID 0x0800 /* Also matches CAT34TS02 */
+#define CAT6095_DEVID_MASK 0xffe0
+
+#define CAT34TS02C_DEVID 0x0a00
+#define CAT34TS02C_DEVID_MASK 0xfff0
+
+#define CAT34TS04_DEVID 0x2200
+#define CAT34TS04_DEVID_MASK 0xfff0
+
+/* ST Microelectronics */
+#define STTS424_DEVID 0x0101
+#define STTS424_DEVID_MASK 0xffff
+
+#define STTS424E_DEVID 0x0000
+#define STTS424E_DEVID_MASK 0xfffe
+
+#define STTS2002_DEVID 0x0300
+#define STTS2002_DEVID_MASK 0xffff
+
+#define STTS2004_DEVID 0x2201
+#define STTS2004_DEVID_MASK 0xffff
+
+#define STTS3000_DEVID 0x0200
+#define STTS3000_DEVID_MASK 0xffff
+
+static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 };
+
+struct jc42_chips {
+ u16 manid;
+ u16 devid;
+ u16 devid_mask;
+};
+
+static struct jc42_chips jc42_chips[] = {
+ { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
+ { ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK },
+ { ATMEL_MANID2, AT30TSE004_DEVID, AT30TSE004_DEVID_MASK },
+ { GT_MANID, GT30TS00_DEVID, GT30TS00_DEVID_MASK },
+ { GT_MANID2, GT34TS02_DEVID, GT34TS02_DEVID_MASK },
+ { IDT_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK },
+ { IDT_MANID, TS3000_DEVID, TS3000_DEVID_MASK },
+ { IDT_MANID, TS3001_DEVID, TS3001_DEVID_MASK },
+ { MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
+ { MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK },
+ { MCP_MANID, MCP9808_DEVID, MCP9808_DEVID_MASK },
+ { MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
+ { MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
+ { MCP_MANID, MCP98244_DEVID, MCP98244_DEVID_MASK },
+ { MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK },
+ { NXP_MANID, SE97_DEVID, SE97_DEVID_MASK },
+ { ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK },
+ { ONS_MANID, CAT34TS02C_DEVID, CAT34TS02C_DEVID_MASK },
+ { ONS_MANID, CAT34TS04_DEVID, CAT34TS04_DEVID_MASK },
+ { NXP_MANID, SE98_DEVID, SE98_DEVID_MASK },
+ { STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK },
+ { STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK },
+ { STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK },
+ { STM_MANID, STTS2004_DEVID, STTS2004_DEVID_MASK },
+ { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK },
+};
+
+enum temp_index {
+ t_input = 0,
+ t_crit,
+ t_min,
+ t_max,
+ t_num_temp
+};
+
+static const u8 temp_regs[t_num_temp] = {
+ [t_input] = JC42_REG_TEMP,
+ [t_crit] = JC42_REG_TEMP_CRITICAL,
+ [t_min] = JC42_REG_TEMP_LOWER,
+ [t_max] = JC42_REG_TEMP_UPPER,
+};
+
+/* Each client has this additional data */
+struct jc42_data {
+ struct i2c_client *client;
+ struct mutex update_lock; /* protect register access */
+ bool extended; /* true if extended range supported */
+ bool valid;
+ unsigned long last_updated; /* In jiffies */
+ u16 orig_config; /* original configuration */
+ u16 config; /* current configuration */
+ u16 temp[t_num_temp];/* Temperatures */
+};
+
+#define JC42_TEMP_MIN_EXTENDED (-40000)
+#define JC42_TEMP_MIN 0
+#define JC42_TEMP_MAX 125000
+
+static u16 jc42_temp_to_reg(long temp, bool extended)
+{
+ int ntemp = clamp_val(temp,
+ extended ? JC42_TEMP_MIN_EXTENDED :
+ JC42_TEMP_MIN, JC42_TEMP_MAX);
+
+ /* convert from 0.001 to 0.0625 resolution */
+ return (ntemp * 2 / 125) & 0x1fff;
+}
+
+static int jc42_temp_from_reg(s16 reg)
+{
+ reg = sign_extend32(reg, 12);
+
+ /* convert from 0.0625 to 0.001 resolution */
+ return reg * 125 / 2;
+}
+
+static struct jc42_data *jc42_update_device(struct device *dev)
+{
+ struct jc42_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ struct jc42_data *ret = data;
+ int i, val;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+ for (i = 0; i < t_num_temp; i++) {
+ val = i2c_smbus_read_word_swapped(client, temp_regs[i]);
+ if (val < 0) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->temp[i] = val;
+ }
+ data->last_updated = jiffies;
+ data->valid = true;
+ }
+abort:
+ mutex_unlock(&data->update_lock);
+ return ret;
+}
+
+static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct jc42_data *data = jc42_update_device(dev);
+ int temp, hyst;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ switch (attr) {
+ case hwmon_temp_input:
+ *val = jc42_temp_from_reg(data->temp[t_input]);
+ return 0;
+ case hwmon_temp_min:
+ *val = jc42_temp_from_reg(data->temp[t_min]);
+ return 0;
+ case hwmon_temp_max:
+ *val = jc42_temp_from_reg(data->temp[t_max]);
+ return 0;
+ case hwmon_temp_crit:
+ *val = jc42_temp_from_reg(data->temp[t_crit]);
+ return 0;
+ case hwmon_temp_max_hyst:
+ temp = jc42_temp_from_reg(data->temp[t_max]);
+ hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
+ >> JC42_CFG_HYST_SHIFT];
+ *val = temp - hyst;
+ return 0;
+ case hwmon_temp_crit_hyst:
+ temp = jc42_temp_from_reg(data->temp[t_crit]);
+ hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
+ >> JC42_CFG_HYST_SHIFT];
+ *val = temp - hyst;
+ return 0;
+ case hwmon_temp_min_alarm:
+ *val = (data->temp[t_input] >> JC42_ALARM_MIN_BIT) & 1;
+ return 0;
+ case hwmon_temp_max_alarm:
+ *val = (data->temp[t_input] >> JC42_ALARM_MAX_BIT) & 1;
+ return 0;
+ case hwmon_temp_crit_alarm:
+ *val = (data->temp[t_input] >> JC42_ALARM_CRIT_BIT) & 1;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ struct jc42_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ int diff, hyst;
+ int ret;
+
+ mutex_lock(&data->update_lock);
+
+ switch (attr) {
+ case hwmon_temp_min:
+ data->temp[t_min] = jc42_temp_to_reg(val, data->extended);
+ ret = i2c_smbus_write_word_swapped(client, temp_regs[t_min],
+ data->temp[t_min]);
+ break;
+ case hwmon_temp_max:
+ data->temp[t_max] = jc42_temp_to_reg(val, data->extended);
+ ret = i2c_smbus_write_word_swapped(client, temp_regs[t_max],
+ data->temp[t_max]);
+ break;
+ case hwmon_temp_crit:
+ data->temp[t_crit] = jc42_temp_to_reg(val, data->extended);
+ ret = i2c_smbus_write_word_swapped(client, temp_regs[t_crit],
+ data->temp[t_crit]);
+ break;
+ case hwmon_temp_crit_hyst:
+ /*
+ * JC42.4 compliant chips only support four hysteresis values.
+ * Pick best choice and go from there.
+ */
+ val = clamp_val(val, (data->extended ? JC42_TEMP_MIN_EXTENDED
+ : JC42_TEMP_MIN) - 6000,
+ JC42_TEMP_MAX);
+ diff = jc42_temp_from_reg(data->temp[t_crit]) - val;
+ hyst = 0;
+ if (diff > 0) {
+ if (diff < 2250)
+ hyst = 1; /* 1.5 degrees C */
+ else if (diff < 4500)
+ hyst = 2; /* 3.0 degrees C */
+ else
+ hyst = 3; /* 6.0 degrees C */
+ }
+ data->config = (data->config & ~JC42_CFG_HYST_MASK) |
+ (hyst << JC42_CFG_HYST_SHIFT);
+ ret = i2c_smbus_write_word_swapped(data->client,
+ JC42_REG_CONFIG,
+ data->config);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return ret;
+}
+
+static umode_t jc42_is_visible(const void *_data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct jc42_data *data = _data;
+ unsigned int config = data->config;
+ umode_t mode = S_IRUGO;
+
+ switch (attr) {
+ case hwmon_temp_min:
+ case hwmon_temp_max:
+ if (!(config & JC42_CFG_EVENT_LOCK))
+ mode |= S_IWUSR;
+ break;
+ case hwmon_temp_crit:
+ if (!(config & JC42_CFG_TCRIT_LOCK))
+ mode |= S_IWUSR;
+ break;
+ case hwmon_temp_crit_hyst:
+ if (!(config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK)))
+ mode |= S_IWUSR;
+ break;
+ case hwmon_temp_input:
+ case hwmon_temp_max_hyst:
+ case hwmon_temp_min_alarm:
+ case hwmon_temp_max_alarm:
+ case hwmon_temp_crit_alarm:
+ break;
+ default:
+ mode = 0;
+ break;
+ }
+ return mode;
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ int i, config, cap, manid, devid;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
+ cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP);
+ config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
+ manid = i2c_smbus_read_word_swapped(client, JC42_REG_MANID);
+ devid = i2c_smbus_read_word_swapped(client, JC42_REG_DEVICEID);
+
+ if (cap < 0 || config < 0 || manid < 0 || devid < 0)
+ return -ENODEV;
+
+ if ((cap & 0xff00) || (config & 0xf800))
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) {
+ struct jc42_chips *chip = &jc42_chips[i];
+ if (manid == chip->manid &&
+ (devid & chip->devid_mask) == chip->devid) {
+ strlcpy(info->type, "jc42", I2C_NAME_SIZE);
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
+
+static const u32 jc42_temp_config[] = {
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_CRIT |
+ HWMON_T_MAX_HYST | HWMON_T_CRIT_HYST |
+ HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM,
+ 0
+};
+
+static const struct hwmon_channel_info jc42_temp = {
+ .type = hwmon_temp,
+ .config = jc42_temp_config,
+};
+
+static const struct hwmon_channel_info *jc42_info[] = {
+ &jc42_temp,
+ NULL
+};
+
+static const struct hwmon_ops jc42_hwmon_ops = {
+ .is_visible = jc42_is_visible,
+ .read = jc42_read,
+ .write = jc42_write,
+};
+
+static const struct hwmon_chip_info jc42_chip_info = {
+ .ops = &jc42_hwmon_ops,
+ .info = jc42_info,
+};
+
+static int jc42_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct device *hwmon_dev;
+ struct jc42_data *data;
+ int config, cap;
+
+ data = devm_kzalloc(dev, sizeof(struct jc42_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
+ cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP);
+ if (cap < 0)
+ return cap;
+
+ data->extended = !!(cap & JC42_CAP_RANGE);
+
+ if (device_property_read_bool(dev, "smbus-timeout-disable")) {
+ int smbus;
+
+ /*
+ * Not all chips support this register, but from a
+ * quick read of various datasheets no chip appears
+ * incompatible with the below attempt to disable
+ * the timeout. And the whole thing is opt-in...
+ */
+ smbus = i2c_smbus_read_word_swapped(client, JC42_REG_SMBUS);
+ if (smbus < 0)
+ return smbus;
+ i2c_smbus_write_word_swapped(client, JC42_REG_SMBUS,
+ smbus | SMBUS_STMOUT);
+ }
+
+ config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
+ if (config < 0)
+ return config;
+
+ data->orig_config = config;
+ if (config & JC42_CFG_SHUTDOWN) {
+ config &= ~JC42_CFG_SHUTDOWN;
+ i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
+ }
+ data->config = config;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(dev, "jc42",
+ data, &jc42_chip_info,
+ NULL);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static int jc42_remove(struct i2c_client *client)
+{
+ struct jc42_data *data = i2c_get_clientdata(client);
+
+ /* Restore original configuration except hysteresis */
+ if ((data->config & ~JC42_CFG_HYST_MASK) !=
+ (data->orig_config & ~JC42_CFG_HYST_MASK)) {
+ int config;
+
+ config = (data->orig_config & ~JC42_CFG_HYST_MASK)
+ | (data->config & JC42_CFG_HYST_MASK);
+ i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int jc42_suspend(struct device *dev)
+{
+ struct jc42_data *data = dev_get_drvdata(dev);
+
+ data->config |= JC42_CFG_SHUTDOWN;
+ i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
+ data->config);
+ return 0;
+}
+
+static int jc42_resume(struct device *dev)
+{
+ struct jc42_data *data = dev_get_drvdata(dev);
+
+ data->config &= ~JC42_CFG_SHUTDOWN;
+ i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
+ data->config);
+ return 0;
+}
+
+static const struct dev_pm_ops jc42_dev_pm_ops = {
+ .suspend = jc42_suspend,
+ .resume = jc42_resume,
+};
+
+#define JC42_DEV_PM_OPS (&jc42_dev_pm_ops)
+#else
+#define JC42_DEV_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+static const struct i2c_device_id jc42_id[] = {
+ { "jc42", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, jc42_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id jc42_of_ids[] = {
+ { .compatible = "jedec,jc-42.4-temp", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, jc42_of_ids);
+#endif
+
+static struct i2c_driver jc42_driver = {
+ .class = I2C_CLASS_SPD | I2C_CLASS_HWMON,
+ .driver = {
+ .name = "jc42",
+ .pm = JC42_DEV_PM_OPS,
+ .of_match_table = of_match_ptr(jc42_of_ids),
+ },
+ .probe = jc42_probe,
+ .remove = jc42_remove,
+ .id_table = jc42_id,
+ .detect = jc42_detect,
+ .address_list = normal_i2c,
+};
+
+module_i2c_driver(jc42_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("JC42 driver");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 18:00:29 +0000