diff options
Diffstat (limited to 'drivers/hwmon/pmbus/Kconfig')
| -rw-r--r-- | drivers/hwmon/pmbus/Kconfig | 201 |
1 files changed, 201 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig new file mode 100644 index 000000000..a82018aaf --- /dev/null +++ b/drivers/hwmon/pmbus/Kconfig @@ -0,0 +1,201 @@ +# +# PMBus chip drivers configuration +# + +menuconfig PMBUS + tristate "PMBus support" + depends on I2C + default n + help + Say yes here if you want to enable PMBus support. + + This driver can also be built as a module. If so, the module will + be called pmbus_core. + +if PMBUS + +config SENSORS_PMBUS + tristate "Generic PMBus devices" + default y + help + If you say yes here you get hardware monitoring support for generic + PMBus devices, including but not limited to ADP4000, BMR453, BMR454, + MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, TPS40400, TPS544B20, + TPS544B25, TPS544C20, TPS544C25, and UDT020. + + This driver can also be built as a module. If so, the module will + be called pmbus. + +config SENSORS_ADM1275 + tristate "Analog Devices ADM1275 and compatibles" + default n + help + If you say yes here you get hardware monitoring support for Analog + Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293, + and ADM1294 Hot-Swap Controller and Digital Power Monitors. + + This driver can also be built as a module. If so, the module will + be called adm1275. + +config SENSORS_IBM_CFFPS + tristate "IBM Common Form Factor Power Supply" + depends on LEDS_CLASS + help + If you say yes here you get hardware monitoring support for the IBM + Common Form Factor power supply. + + This driver can also be built as a module. If so, the module will + be called ibm-cffps. + +config SENSORS_IR35221 + tristate "Infineon IR35221" + default n + help + If you say yes here you get hardware monitoring support for the + Infineon IR35221 controller. + + This driver can also be built as a module. If so, the module will + be called ir35521. + +config SENSORS_LM25066 + tristate "National Semiconductor LM25066 and compatibles" + default n + help + If you say yes here you get hardware monitoring support for National + Semiconductor LM25056, LM25066, LM5064, and LM5066. + + This driver can also be built as a module. If so, the module will + be called lm25066. + +config SENSORS_LTC2978 + tristate "Linear Technologies LTC2978 and compatibles" + default n + help + If you say yes here you get hardware monitoring support for Linear + Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880, + LTC3883, LTC3886, LTC3887, LTCM2987, LTM4675, and LTM4676. + + This driver can also be built as a module. If so, the module will + be called ltc2978. + +config SENSORS_LTC2978_REGULATOR + bool "Regulator support for LTC2978 and compatibles" + depends on SENSORS_LTC2978 && REGULATOR + help + If you say yes here you get regulator support for Linear + Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, and LTM4676. + +config SENSORS_LTC3815 + tristate "Linear Technologies LTC3815" + default n + help + If you say yes here you get hardware monitoring support for Linear + Technology LTC3815. + + This driver can also be built as a module. If so, the module will + be called ltc3815. + +config SENSORS_MAX16064 + tristate "Maxim MAX16064" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX16064. + + This driver can also be built as a module. If so, the module will + be called max16064. + +config SENSORS_MAX20751 + tristate "Maxim MAX20751" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX20751. + + This driver can also be built as a module. If so, the module will + be called max20751. + +config SENSORS_MAX31785 + tristate "Maxim MAX31785 and compatibles" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX31785. + + This driver can also be built as a module. If so, the module will + be called max31785. + +config SENSORS_MAX34440 + tristate "Maxim MAX34440 and compatibles" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461. + + This driver can also be built as a module. If so, the module will + be called max34440. + +config SENSORS_MAX8688 + tristate "Maxim MAX8688" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX8688. + + This driver can also be built as a module. If so, the module will + be called max8688. + +config SENSORS_TPS40422 + tristate "TI TPS40422" + default n + help + If you say yes here you get hardware monitoring support for TI + TPS40422. + + This driver can also be built as a module. If so, the module will + be called tps40422. + +config SENSORS_TPS53679 + tristate "TI TPS53679" + help + If you say yes here you get hardware monitoring support for TI + TPS53679. + + This driver can also be built as a module. If so, the module will + be called tps53679. + +config SENSORS_UCD9000 + tristate "TI UCD90120, UCD90124, UCD90160, UCD9090, UCD90910" + default n + help + If you say yes here you get hardware monitoring support for TI + UCD90120, UCD90124, UCD90160, UCD9090, UCD90910, Sequencer and System + Health Controllers. + + This driver can also be built as a module. If so, the module will + be called ucd9000. + +config SENSORS_UCD9200 + tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248" + default n + help + If you say yes here you get hardware monitoring support for TI + UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 + Digital PWM System Controllers. + + This driver can also be built as a module. If so, the module will + be called ucd9200. + +config SENSORS_ZL6100 + tristate "Intersil ZL6100 and compatibles" + default n + help + If you say yes here you get hardware monitoring support for Intersil + ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105, + ZL9101M, and ZL9117M Digital DC/DC Controllers, as well as for + Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464. + + This driver can also be built as a module. If so, the module will + be called zl6100. + +endif # PMBUS |