summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/pmbus
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/pmbus')
-rw-r--r--drivers/hwmon/pmbus/Kconfig201
-rw-r--r--drivers/hwmon/pmbus/Makefile23
-rw-r--r--drivers/hwmon/pmbus/adm1275.c694
-rw-r--r--drivers/hwmon/pmbus/ibm-cffps.c439
-rw-r--r--drivers/hwmon/pmbus/ir35221.c148
-rw-r--r--drivers/hwmon/pmbus/lm25066.c530
-rw-r--r--drivers/hwmon/pmbus/ltc2978.c792
-rw-r--r--drivers/hwmon/pmbus/ltc3815.c215
-rw-r--r--drivers/hwmon/pmbus/max16064.c127
-rw-r--r--drivers/hwmon/pmbus/max20751.c64
-rw-r--r--drivers/hwmon/pmbus/max31785.c408
-rw-r--r--drivers/hwmon/pmbus/max34440.c520
-rw-r--r--drivers/hwmon/pmbus/max8688.c205
-rw-r--r--drivers/hwmon/pmbus/pmbus.c239
-rw-r--r--drivers/hwmon/pmbus/pmbus.h467
-rw-r--r--drivers/hwmon/pmbus/pmbus_core.c2450
-rw-r--r--drivers/hwmon/pmbus/tps40422.c64
-rw-r--r--drivers/hwmon/pmbus/tps53679.c120
-rw-r--r--drivers/hwmon/pmbus/ucd9000.c632
-rw-r--r--drivers/hwmon/pmbus/ucd9200.c226
-rw-r--r--drivers/hwmon/pmbus/zl6100.c420
21 files changed, 8984 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
new file mode 100644
index 000000000..a82018aaf
--- /dev/null
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -0,0 +1,201 @@
+#
+# PMBus chip drivers configuration
+#
+
+menuconfig PMBUS
+ tristate "PMBus support"
+ depends on I2C
+ default n
+ help
+ Say yes here if you want to enable PMBus support.
+
+ This driver can also be built as a module. If so, the module will
+ be called pmbus_core.
+
+if PMBUS
+
+config SENSORS_PMBUS
+ tristate "Generic PMBus devices"
+ default y
+ help
+ If you say yes here you get hardware monitoring support for generic
+ PMBus devices, including but not limited to ADP4000, BMR453, BMR454,
+ MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, TPS40400, TPS544B20,
+ TPS544B25, TPS544C20, TPS544C25, and UDT020.
+
+ This driver can also be built as a module. If so, the module will
+ be called pmbus.
+
+config SENSORS_ADM1275
+ tristate "Analog Devices ADM1275 and compatibles"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Analog
+ Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293,
+ and ADM1294 Hot-Swap Controller and Digital Power Monitors.
+
+ This driver can also be built as a module. If so, the module will
+ be called adm1275.
+
+config SENSORS_IBM_CFFPS
+ tristate "IBM Common Form Factor Power Supply"
+ depends on LEDS_CLASS
+ help
+ If you say yes here you get hardware monitoring support for the IBM
+ Common Form Factor power supply.
+
+ This driver can also be built as a module. If so, the module will
+ be called ibm-cffps.
+
+config SENSORS_IR35221
+ tristate "Infineon IR35221"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for the
+ Infineon IR35221 controller.
+
+ This driver can also be built as a module. If so, the module will
+ be called ir35521.
+
+config SENSORS_LM25066
+ tristate "National Semiconductor LM25066 and compatibles"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for National
+ Semiconductor LM25056, LM25066, LM5064, and LM5066.
+
+ This driver can also be built as a module. If so, the module will
+ be called lm25066.
+
+config SENSORS_LTC2978
+ tristate "Linear Technologies LTC2978 and compatibles"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Linear
+ Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880,
+ LTC3883, LTC3886, LTC3887, LTCM2987, LTM4675, and LTM4676.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc2978.
+
+config SENSORS_LTC2978_REGULATOR
+ bool "Regulator support for LTC2978 and compatibles"
+ depends on SENSORS_LTC2978 && REGULATOR
+ help
+ If you say yes here you get regulator support for Linear
+ Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, and LTM4676.
+
+config SENSORS_LTC3815
+ tristate "Linear Technologies LTC3815"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Linear
+ Technology LTC3815.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc3815.
+
+config SENSORS_MAX16064
+ tristate "Maxim MAX16064"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Maxim
+ MAX16064.
+
+ This driver can also be built as a module. If so, the module will
+ be called max16064.
+
+config SENSORS_MAX20751
+ tristate "Maxim MAX20751"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Maxim
+ MAX20751.
+
+ This driver can also be built as a module. If so, the module will
+ be called max20751.
+
+config SENSORS_MAX31785
+ tristate "Maxim MAX31785 and compatibles"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Maxim
+ MAX31785.
+
+ This driver can also be built as a module. If so, the module will
+ be called max31785.
+
+config SENSORS_MAX34440
+ tristate "Maxim MAX34440 and compatibles"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Maxim
+ MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461.
+
+ This driver can also be built as a module. If so, the module will
+ be called max34440.
+
+config SENSORS_MAX8688
+ tristate "Maxim MAX8688"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Maxim
+ MAX8688.
+
+ This driver can also be built as a module. If so, the module will
+ be called max8688.
+
+config SENSORS_TPS40422
+ tristate "TI TPS40422"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for TI
+ TPS40422.
+
+ This driver can also be built as a module. If so, the module will
+ be called tps40422.
+
+config SENSORS_TPS53679
+ tristate "TI TPS53679"
+ help
+ If you say yes here you get hardware monitoring support for TI
+ TPS53679.
+
+ This driver can also be built as a module. If so, the module will
+ be called tps53679.
+
+config SENSORS_UCD9000
+ tristate "TI UCD90120, UCD90124, UCD90160, UCD9090, UCD90910"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for TI
+ UCD90120, UCD90124, UCD90160, UCD9090, UCD90910, Sequencer and System
+ Health Controllers.
+
+ This driver can also be built as a module. If so, the module will
+ be called ucd9000.
+
+config SENSORS_UCD9200
+ tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for TI
+ UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
+ Digital PWM System Controllers.
+
+ This driver can also be built as a module. If so, the module will
+ be called ucd9200.
+
+config SENSORS_ZL6100
+ tristate "Intersil ZL6100 and compatibles"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Intersil
+ ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105,
+ ZL9101M, and ZL9117M Digital DC/DC Controllers, as well as for
+ Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464.
+
+ This driver can also be built as a module. If so, the module will
+ be called zl6100.
+
+endif # PMBUS
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
new file mode 100644
index 000000000..ea0e39518
--- /dev/null
+++ b/drivers/hwmon/pmbus/Makefile
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for PMBus chip drivers.
+#
+
+obj-$(CONFIG_PMBUS) += pmbus_core.o
+obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
+obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
+obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
+obj-$(CONFIG_SENSORS_IR35221) += ir35221.o
+obj-$(CONFIG_SENSORS_LM25066) += lm25066.o
+obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
+obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o
+obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
+obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
+obj-$(CONFIG_SENSORS_MAX31785) += max31785.o
+obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
+obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
+obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
+obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
+obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
+obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
+obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
new file mode 100644
index 000000000..a19cf9052
--- /dev/null
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -0,0 +1,694 @@
+/*
+ * Hardware monitoring driver for Analog Devices ADM1275 Hot-Swap Controller
+ * and Digital Power Monitor
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2018 Guenter Roeck
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/bitops.h>
+#include "pmbus.h"
+
+enum chips { adm1075, adm1272, adm1275, adm1276, adm1278, adm1293, adm1294 };
+
+#define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0)
+#define ADM1293_MFR_STATUS_VAUX_UV_WARN BIT(5)
+#define ADM1293_MFR_STATUS_VAUX_OV_WARN BIT(6)
+
+#define ADM1275_PEAK_IOUT 0xd0
+#define ADM1275_PEAK_VIN 0xd1
+#define ADM1275_PEAK_VOUT 0xd2
+#define ADM1275_PMON_CONFIG 0xd4
+
+#define ADM1275_VIN_VOUT_SELECT BIT(6)
+#define ADM1275_VRANGE BIT(5)
+#define ADM1075_IRANGE_50 BIT(4)
+#define ADM1075_IRANGE_25 BIT(3)
+#define ADM1075_IRANGE_MASK (BIT(3) | BIT(4))
+
+#define ADM1272_IRANGE BIT(0)
+
+#define ADM1278_TEMP1_EN BIT(3)
+#define ADM1278_VIN_EN BIT(2)
+#define ADM1278_VOUT_EN BIT(1)
+
+#define ADM1293_IRANGE_25 0
+#define ADM1293_IRANGE_50 BIT(6)
+#define ADM1293_IRANGE_100 BIT(7)
+#define ADM1293_IRANGE_200 (BIT(6) | BIT(7))
+#define ADM1293_IRANGE_MASK (BIT(6) | BIT(7))
+
+#define ADM1293_VIN_SEL_012 BIT(2)
+#define ADM1293_VIN_SEL_074 BIT(3)
+#define ADM1293_VIN_SEL_210 (BIT(2) | BIT(3))
+#define ADM1293_VIN_SEL_MASK (BIT(2) | BIT(3))
+
+#define ADM1293_VAUX_EN BIT(1)
+
+#define ADM1278_PEAK_TEMP 0xd7
+#define ADM1275_IOUT_WARN2_LIMIT 0xd7
+#define ADM1275_DEVICE_CONFIG 0xd8
+
+#define ADM1275_IOUT_WARN2_SELECT BIT(4)
+
+#define ADM1276_PEAK_PIN 0xda
+#define ADM1075_READ_VAUX 0xdd
+#define ADM1075_VAUX_OV_WARN_LIMIT 0xde
+#define ADM1075_VAUX_UV_WARN_LIMIT 0xdf
+#define ADM1293_IOUT_MIN 0xe3
+#define ADM1293_PIN_MIN 0xe4
+#define ADM1075_VAUX_STATUS 0xf6
+
+#define ADM1075_VAUX_OV_WARN BIT(7)
+#define ADM1075_VAUX_UV_WARN BIT(6)
+
+struct adm1275_data {
+ int id;
+ bool have_oc_fault;
+ bool have_uc_fault;
+ bool have_vout;
+ bool have_vaux_status;
+ bool have_mfr_vaux_status;
+ bool have_iout_min;
+ bool have_pin_min;
+ bool have_pin_max;
+ bool have_temp_max;
+ struct pmbus_driver_info info;
+};
+
+#define to_adm1275_data(x) container_of(x, struct adm1275_data, info)
+
+struct coefficients {
+ s16 m;
+ s16 b;
+ s16 R;
+};
+
+static const struct coefficients adm1075_coefficients[] = {
+ [0] = { 27169, 0, -1 }, /* voltage */
+ [1] = { 806, 20475, -1 }, /* current, irange25 */
+ [2] = { 404, 20475, -1 }, /* current, irange50 */
+ [3] = { 8549, 0, -1 }, /* power, irange25 */
+ [4] = { 4279, 0, -1 }, /* power, irange50 */
+};
+
+static const struct coefficients adm1272_coefficients[] = {
+ [0] = { 6770, 0, -2 }, /* voltage, vrange 60V */
+ [1] = { 4062, 0, -2 }, /* voltage, vrange 100V */
+ [2] = { 1326, 20480, -1 }, /* current, vsense range 15mV */
+ [3] = { 663, 20480, -1 }, /* current, vsense range 30mV */
+ [4] = { 3512, 0, -2 }, /* power, vrange 60V, irange 15mV */
+ [5] = { 21071, 0, -3 }, /* power, vrange 100V, irange 15mV */
+ [6] = { 17561, 0, -3 }, /* power, vrange 60V, irange 30mV */
+ [7] = { 10535, 0, -3 }, /* power, vrange 100V, irange 30mV */
+ [8] = { 42, 31871, -1 }, /* temperature */
+
+};
+
+static const struct coefficients adm1275_coefficients[] = {
+ [0] = { 19199, 0, -2 }, /* voltage, vrange set */
+ [1] = { 6720, 0, -1 }, /* voltage, vrange not set */
+ [2] = { 807, 20475, -1 }, /* current */
+};
+
+static const struct coefficients adm1276_coefficients[] = {
+ [0] = { 19199, 0, -2 }, /* voltage, vrange set */
+ [1] = { 6720, 0, -1 }, /* voltage, vrange not set */
+ [2] = { 807, 20475, -1 }, /* current */
+ [3] = { 6043, 0, -2 }, /* power, vrange set */
+ [4] = { 2115, 0, -1 }, /* power, vrange not set */
+};
+
+static const struct coefficients adm1278_coefficients[] = {
+ [0] = { 19599, 0, -2 }, /* voltage */
+ [1] = { 800, 20475, -1 }, /* current */
+ [2] = { 6123, 0, -2 }, /* power */
+ [3] = { 42, 31880, -1 }, /* temperature */
+};
+
+static const struct coefficients adm1293_coefficients[] = {
+ [0] = { 3333, -1, 0 }, /* voltage, vrange 1.2V */
+ [1] = { 5552, -5, -1 }, /* voltage, vrange 7.4V */
+ [2] = { 19604, -50, -2 }, /* voltage, vrange 21V */
+ [3] = { 8000, -100, -2 }, /* current, irange25 */
+ [4] = { 4000, -100, -2 }, /* current, irange50 */
+ [5] = { 20000, -1000, -3 }, /* current, irange100 */
+ [6] = { 10000, -1000, -3 }, /* current, irange200 */
+ [7] = { 10417, 0, -1 }, /* power, 1.2V, irange25 */
+ [8] = { 5208, 0, -1 }, /* power, 1.2V, irange50 */
+ [9] = { 26042, 0, -2 }, /* power, 1.2V, irange100 */
+ [10] = { 13021, 0, -2 }, /* power, 1.2V, irange200 */
+ [11] = { 17351, 0, -2 }, /* power, 7.4V, irange25 */
+ [12] = { 8676, 0, -2 }, /* power, 7.4V, irange50 */
+ [13] = { 4338, 0, -2 }, /* power, 7.4V, irange100 */
+ [14] = { 21689, 0, -3 }, /* power, 7.4V, irange200 */
+ [15] = { 6126, 0, -2 }, /* power, 21V, irange25 */
+ [16] = { 30631, 0, -3 }, /* power, 21V, irange50 */
+ [17] = { 15316, 0, -3 }, /* power, 21V, irange100 */
+ [18] = { 7658, 0, -3 }, /* power, 21V, irange200 */
+};
+
+static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct adm1275_data *data = to_adm1275_data(info);
+ int ret = 0;
+
+ if (page > 0)
+ return -ENXIO;
+
+ switch (reg) {
+ case PMBUS_IOUT_UC_FAULT_LIMIT:
+ if (!data->have_uc_fault)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
+ break;
+ case PMBUS_IOUT_OC_FAULT_LIMIT:
+ if (!data->have_oc_fault)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
+ break;
+ case PMBUS_VOUT_OV_WARN_LIMIT:
+ if (data->have_vout)
+ return -ENODATA;
+ ret = pmbus_read_word_data(client, 0,
+ ADM1075_VAUX_OV_WARN_LIMIT);
+ break;
+ case PMBUS_VOUT_UV_WARN_LIMIT:
+ if (data->have_vout)
+ return -ENODATA;
+ ret = pmbus_read_word_data(client, 0,
+ ADM1075_VAUX_UV_WARN_LIMIT);
+ break;
+ case PMBUS_READ_VOUT:
+ if (data->have_vout)
+ return -ENODATA;
+ ret = pmbus_read_word_data(client, 0, ADM1075_READ_VAUX);
+ break;
+ case PMBUS_VIRT_READ_IOUT_MIN:
+ if (!data->have_iout_min)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, 0, ADM1293_IOUT_MIN);
+ break;
+ case PMBUS_VIRT_READ_IOUT_MAX:
+ ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT);
+ break;
+ case PMBUS_VIRT_READ_VOUT_MAX:
+ ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VOUT);
+ break;
+ case PMBUS_VIRT_READ_VIN_MAX:
+ ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN);
+ break;
+ case PMBUS_VIRT_READ_PIN_MIN:
+ if (!data->have_pin_min)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, 0, ADM1293_PIN_MIN);
+ break;
+ case PMBUS_VIRT_READ_PIN_MAX:
+ if (!data->have_pin_max)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, 0, ADM1276_PEAK_PIN);
+ break;
+ case PMBUS_VIRT_READ_TEMP_MAX:
+ if (!data->have_temp_max)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, 0, ADM1278_PEAK_TEMP);
+ break;
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ case PMBUS_VIRT_RESET_VIN_HISTORY:
+ break;
+ case PMBUS_VIRT_RESET_PIN_HISTORY:
+ if (!data->have_pin_max)
+ return -ENXIO;
+ break;
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ if (!data->have_temp_max)
+ return -ENXIO;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
+ u16 word)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct adm1275_data *data = to_adm1275_data(info);
+ int ret;
+
+ if (page > 0)
+ return -ENXIO;
+
+ switch (reg) {
+ case PMBUS_IOUT_UC_FAULT_LIMIT:
+ case PMBUS_IOUT_OC_FAULT_LIMIT:
+ ret = pmbus_write_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT,
+ word);
+ break;
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_IOUT, 0);
+ if (!ret && data->have_iout_min)
+ ret = pmbus_write_word_data(client, 0,
+ ADM1293_IOUT_MIN, 0);
+ break;
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VOUT, 0);
+ break;
+ case PMBUS_VIRT_RESET_VIN_HISTORY:
+ ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VIN, 0);
+ break;
+ case PMBUS_VIRT_RESET_PIN_HISTORY:
+ ret = pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, 0);
+ if (!ret && data->have_pin_min)
+ ret = pmbus_write_word_data(client, 0,
+ ADM1293_PIN_MIN, 0);
+ break;
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ ret = pmbus_write_word_data(client, 0, ADM1278_PEAK_TEMP, 0);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct adm1275_data *data = to_adm1275_data(info);
+ int mfr_status, ret;
+
+ if (page > 0)
+ return -ENXIO;
+
+ switch (reg) {
+ case PMBUS_STATUS_IOUT:
+ ret = pmbus_read_byte_data(client, page, PMBUS_STATUS_IOUT);
+ if (ret < 0)
+ break;
+ if (!data->have_oc_fault && !data->have_uc_fault)
+ break;
+ mfr_status = pmbus_read_byte_data(client, page,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (mfr_status < 0)
+ return mfr_status;
+ if (mfr_status & ADM1275_MFR_STATUS_IOUT_WARN2) {
+ ret |= data->have_oc_fault ?
+ PB_IOUT_OC_FAULT : PB_IOUT_UC_FAULT;
+ }
+ break;
+ case PMBUS_STATUS_VOUT:
+ if (data->have_vout)
+ return -ENODATA;
+ ret = 0;
+ if (data->have_vaux_status) {
+ mfr_status = pmbus_read_byte_data(client, 0,
+ ADM1075_VAUX_STATUS);
+ if (mfr_status < 0)
+ return mfr_status;
+ if (mfr_status & ADM1075_VAUX_OV_WARN)
+ ret |= PB_VOLTAGE_OV_WARNING;
+ if (mfr_status & ADM1075_VAUX_UV_WARN)
+ ret |= PB_VOLTAGE_UV_WARNING;
+ } else if (data->have_mfr_vaux_status) {
+ mfr_status = pmbus_read_byte_data(client, page,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (mfr_status < 0)
+ return mfr_status;
+ if (mfr_status & ADM1293_MFR_STATUS_VAUX_OV_WARN)
+ ret |= PB_VOLTAGE_OV_WARNING;
+ if (mfr_status & ADM1293_MFR_STATUS_VAUX_UV_WARN)
+ ret |= PB_VOLTAGE_UV_WARNING;
+ }
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static const struct i2c_device_id adm1275_id[] = {
+ { "adm1075", adm1075 },
+ { "adm1272", adm1272 },
+ { "adm1275", adm1275 },
+ { "adm1276", adm1276 },
+ { "adm1278", adm1278 },
+ { "adm1293", adm1293 },
+ { "adm1294", adm1294 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adm1275_id);
+
+static int adm1275_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ s32 (*config_read_fn)(const struct i2c_client *client, u8 reg);
+ u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
+ int config, device_config;
+ int ret;
+ struct pmbus_driver_info *info;
+ struct adm1275_data *data;
+ const struct i2c_device_id *mid;
+ const struct coefficients *coefficients;
+ int vindex = -1, voindex = -1, cindex = -1, pindex = -1;
+ int tindex = -1;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE_DATA
+ | I2C_FUNC_SMBUS_BLOCK_DATA))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, block_buffer);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read Manufacturer ID\n");
+ return ret;
+ }
+ if (ret != 3 || strncmp(block_buffer, "ADI", 3)) {
+ dev_err(&client->dev, "Unsupported Manufacturer ID\n");
+ return -ENODEV;
+ }
+
+ ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read Manufacturer Model\n");
+ return ret;
+ }
+ for (mid = adm1275_id; mid->name[0]; mid++) {
+ if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
+ break;
+ }
+ if (!mid->name[0]) {
+ dev_err(&client->dev, "Unsupported device\n");
+ return -ENODEV;
+ }
+
+ if (id->driver_data != mid->driver_data)
+ dev_notice(&client->dev,
+ "Device mismatch: Configured %s, detected %s\n",
+ id->name, mid->name);
+
+ if (mid->driver_data == adm1272 || mid->driver_data == adm1278 ||
+ mid->driver_data == adm1293 || mid->driver_data == adm1294)
+ config_read_fn = i2c_smbus_read_word_data;
+ else
+ config_read_fn = i2c_smbus_read_byte_data;
+ config = config_read_fn(client, ADM1275_PMON_CONFIG);
+ if (config < 0)
+ return config;
+
+ device_config = config_read_fn(client, ADM1275_DEVICE_CONFIG);
+ if (device_config < 0)
+ return device_config;
+
+ data = devm_kzalloc(&client->dev, sizeof(struct adm1275_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->id = mid->driver_data;
+
+ info = &data->info;
+
+ info->pages = 1;
+ info->format[PSC_VOLTAGE_IN] = direct;
+ info->format[PSC_VOLTAGE_OUT] = direct;
+ info->format[PSC_CURRENT_OUT] = direct;
+ info->format[PSC_POWER] = direct;
+ info->format[PSC_TEMPERATURE] = direct;
+ info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
+
+ info->read_word_data = adm1275_read_word_data;
+ info->read_byte_data = adm1275_read_byte_data;
+ info->write_word_data = adm1275_write_word_data;
+
+ switch (data->id) {
+ case adm1075:
+ if (device_config & ADM1275_IOUT_WARN2_SELECT)
+ data->have_oc_fault = true;
+ else
+ data->have_uc_fault = true;
+ data->have_pin_max = true;
+ data->have_vaux_status = true;
+
+ coefficients = adm1075_coefficients;
+ vindex = 0;
+ switch (config & ADM1075_IRANGE_MASK) {
+ case ADM1075_IRANGE_25:
+ cindex = 1;
+ pindex = 3;
+ break;
+ case ADM1075_IRANGE_50:
+ cindex = 2;
+ pindex = 4;
+ break;
+ default:
+ dev_err(&client->dev, "Invalid input current range");
+ break;
+ }
+
+ info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
+ | PMBUS_HAVE_STATUS_INPUT;
+ if (config & ADM1275_VIN_VOUT_SELECT)
+ info->func[0] |=
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ break;
+ case adm1272:
+ data->have_vout = true;
+ data->have_pin_max = true;
+ data->have_temp_max = true;
+
+ coefficients = adm1272_coefficients;
+ vindex = (config & ADM1275_VRANGE) ? 1 : 0;
+ cindex = (config & ADM1272_IRANGE) ? 3 : 2;
+ /* pindex depends on the combination of the above */
+ switch (config & (ADM1275_VRANGE | ADM1272_IRANGE)) {
+ case 0:
+ default:
+ pindex = 4;
+ break;
+ case ADM1275_VRANGE:
+ pindex = 5;
+ break;
+ case ADM1272_IRANGE:
+ pindex = 6;
+ break;
+ case ADM1275_VRANGE | ADM1272_IRANGE:
+ pindex = 7;
+ break;
+ }
+ tindex = 8;
+
+ info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+
+ /* Enable VOUT if not enabled (it is disabled by default) */
+ if (!(config & ADM1278_VOUT_EN)) {
+ config |= ADM1278_VOUT_EN;
+ ret = i2c_smbus_write_byte_data(client,
+ ADM1275_PMON_CONFIG,
+ config);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Failed to enable VOUT monitoring\n");
+ return -ENODEV;
+ }
+ }
+
+ if (config & ADM1278_TEMP1_EN)
+ info->func[0] |=
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+ if (config & ADM1278_VIN_EN)
+ info->func[0] |= PMBUS_HAVE_VIN;
+ break;
+ case adm1275:
+ if (device_config & ADM1275_IOUT_WARN2_SELECT)
+ data->have_oc_fault = true;
+ else
+ data->have_uc_fault = true;
+ data->have_vout = true;
+
+ coefficients = adm1275_coefficients;
+ vindex = (config & ADM1275_VRANGE) ? 0 : 1;
+ cindex = 2;
+
+ if (config & ADM1275_VIN_VOUT_SELECT)
+ info->func[0] |=
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ else
+ info->func[0] |=
+ PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
+ break;
+ case adm1276:
+ if (device_config & ADM1275_IOUT_WARN2_SELECT)
+ data->have_oc_fault = true;
+ else
+ data->have_uc_fault = true;
+ data->have_vout = true;
+ data->have_pin_max = true;
+
+ coefficients = adm1276_coefficients;
+ vindex = (config & ADM1275_VRANGE) ? 0 : 1;
+ cindex = 2;
+ pindex = (config & ADM1275_VRANGE) ? 3 : 4;
+
+ info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
+ | PMBUS_HAVE_STATUS_INPUT;
+ if (config & ADM1275_VIN_VOUT_SELECT)
+ info->func[0] |=
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ break;
+ case adm1278:
+ data->have_vout = true;
+ data->have_pin_max = true;
+ data->have_temp_max = true;
+
+ coefficients = adm1278_coefficients;
+ vindex = 0;
+ cindex = 1;
+ pindex = 2;
+ tindex = 3;
+
+ info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+
+ /* Enable VOUT if not enabled (it is disabled by default) */
+ if (!(config & ADM1278_VOUT_EN)) {
+ config |= ADM1278_VOUT_EN;
+ ret = i2c_smbus_write_byte_data(client,
+ ADM1275_PMON_CONFIG,
+ config);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Failed to enable VOUT monitoring\n");
+ return -ENODEV;
+ }
+ }
+
+ if (config & ADM1278_TEMP1_EN)
+ info->func[0] |=
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+ if (config & ADM1278_VIN_EN)
+ info->func[0] |= PMBUS_HAVE_VIN;
+ break;
+ case adm1293:
+ case adm1294:
+ data->have_iout_min = true;
+ data->have_pin_min = true;
+ data->have_pin_max = true;
+ data->have_mfr_vaux_status = true;
+
+ coefficients = adm1293_coefficients;
+
+ voindex = 0;
+ switch (config & ADM1293_VIN_SEL_MASK) {
+ case ADM1293_VIN_SEL_012: /* 1.2V */
+ vindex = 0;
+ break;
+ case ADM1293_VIN_SEL_074: /* 7.4V */
+ vindex = 1;
+ break;
+ case ADM1293_VIN_SEL_210: /* 21V */
+ vindex = 2;
+ break;
+ default: /* disabled */
+ break;
+ }
+
+ switch (config & ADM1293_IRANGE_MASK) {
+ case ADM1293_IRANGE_25:
+ cindex = 3;
+ break;
+ case ADM1293_IRANGE_50:
+ cindex = 4;
+ break;
+ case ADM1293_IRANGE_100:
+ cindex = 5;
+ break;
+ case ADM1293_IRANGE_200:
+ cindex = 6;
+ break;
+ }
+
+ if (vindex >= 0)
+ pindex = 7 + vindex * 4 + (cindex - 3);
+
+ if (config & ADM1293_VAUX_EN)
+ info->func[0] |=
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+
+ info->func[0] |= PMBUS_HAVE_PIN |
+ PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
+
+ break;
+ default:
+ dev_err(&client->dev, "Unsupported device\n");
+ return -ENODEV;
+ }
+
+ if (voindex < 0)
+ voindex = vindex;
+ if (vindex >= 0) {
+ info->m[PSC_VOLTAGE_IN] = coefficients[vindex].m;
+ info->b[PSC_VOLTAGE_IN] = coefficients[vindex].b;
+ info->R[PSC_VOLTAGE_IN] = coefficients[vindex].R;
+ }
+ if (voindex >= 0) {
+ info->m[PSC_VOLTAGE_OUT] = coefficients[voindex].m;
+ info->b[PSC_VOLTAGE_OUT] = coefficients[voindex].b;
+ info->R[PSC_VOLTAGE_OUT] = coefficients[voindex].R;
+ }
+ if (cindex >= 0) {
+ info->m[PSC_CURRENT_OUT] = coefficients[cindex].m;
+ info->b[PSC_CURRENT_OUT] = coefficients[cindex].b;
+ info->R[PSC_CURRENT_OUT] = coefficients[cindex].R;
+ }
+ if (pindex >= 0) {
+ info->m[PSC_POWER] = coefficients[pindex].m;
+ info->b[PSC_POWER] = coefficients[pindex].b;
+ info->R[PSC_POWER] = coefficients[pindex].R;
+ }
+ if (tindex >= 0) {
+ info->m[PSC_TEMPERATURE] = coefficients[tindex].m;
+ info->b[PSC_TEMPERATURE] = coefficients[tindex].b;
+ info->R[PSC_TEMPERATURE] = coefficients[tindex].R;
+ }
+
+ return pmbus_do_probe(client, id, info);
+}
+
+static struct i2c_driver adm1275_driver = {
+ .driver = {
+ .name = "adm1275",
+ },
+ .probe = adm1275_probe,
+ .remove = pmbus_do_remove,
+ .id_table = adm1275_id,
+};
+
+module_i2c_driver(adm1275_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1275 and compatibles");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
new file mode 100644
index 000000000..edc70ac7d
--- /dev/null
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -0,0 +1,439 @@
+/*
+ * Copyright 2017 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/i2c.h>
+#include <linux/jiffies.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pmbus.h>
+
+#include "pmbus.h"
+
+#define CFFPS_FRU_CMD 0x9A
+#define CFFPS_PN_CMD 0x9B
+#define CFFPS_SN_CMD 0x9E
+#define CFFPS_CCIN_CMD 0xBD
+#define CFFPS_FW_CMD_START 0xFA
+#define CFFPS_FW_NUM_BYTES 4
+#define CFFPS_SYS_CONFIG_CMD 0xDA
+
+#define CFFPS_INPUT_HISTORY_CMD 0xD6
+#define CFFPS_INPUT_HISTORY_SIZE 100
+
+/* STATUS_MFR_SPECIFIC bits */
+#define CFFPS_MFR_FAN_FAULT BIT(0)
+#define CFFPS_MFR_THERMAL_FAULT BIT(1)
+#define CFFPS_MFR_OV_FAULT BIT(2)
+#define CFFPS_MFR_UV_FAULT BIT(3)
+#define CFFPS_MFR_PS_KILL BIT(4)
+#define CFFPS_MFR_OC_FAULT BIT(5)
+#define CFFPS_MFR_VAUX_FAULT BIT(6)
+#define CFFPS_MFR_CURRENT_SHARE_WARNING BIT(7)
+
+#define CFFPS_LED_BLINK BIT(0)
+#define CFFPS_LED_ON BIT(1)
+#define CFFPS_LED_OFF BIT(2)
+#define CFFPS_BLINK_RATE_MS 250
+
+enum {
+ CFFPS_DEBUGFS_INPUT_HISTORY = 0,
+ CFFPS_DEBUGFS_FRU,
+ CFFPS_DEBUGFS_PN,
+ CFFPS_DEBUGFS_SN,
+ CFFPS_DEBUGFS_CCIN,
+ CFFPS_DEBUGFS_FW,
+ CFFPS_DEBUGFS_NUM_ENTRIES
+};
+
+struct ibm_cffps_input_history {
+ struct mutex update_lock;
+ unsigned long last_update;
+
+ u8 byte_count;
+ u8 data[CFFPS_INPUT_HISTORY_SIZE];
+};
+
+struct ibm_cffps {
+ struct i2c_client *client;
+
+ struct ibm_cffps_input_history input_history;
+
+ int debugfs_entries[CFFPS_DEBUGFS_NUM_ENTRIES];
+
+ char led_name[32];
+ u8 led_state;
+ struct led_classdev led;
+};
+
+#define to_psu(x, y) container_of((x), struct ibm_cffps, debugfs_entries[(y)])
+
+static ssize_t ibm_cffps_read_input_history(struct ibm_cffps *psu,
+ char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ int rc;
+ u8 msgbuf0[1] = { CFFPS_INPUT_HISTORY_CMD };
+ u8 msgbuf1[CFFPS_INPUT_HISTORY_SIZE + 1] = { 0 };
+ struct i2c_msg msg[2] = {
+ {
+ .addr = psu->client->addr,
+ .flags = psu->client->flags,
+ .len = 1,
+ .buf = msgbuf0,
+ }, {
+ .addr = psu->client->addr,
+ .flags = psu->client->flags | I2C_M_RD,
+ .len = CFFPS_INPUT_HISTORY_SIZE + 1,
+ .buf = msgbuf1,
+ },
+ };
+
+ if (!*ppos) {
+ mutex_lock(&psu->input_history.update_lock);
+ if (time_after(jiffies, psu->input_history.last_update + HZ)) {
+ /*
+ * Use a raw i2c transfer, since we need more bytes
+ * than Linux I2C supports through smbus xfr (only 32).
+ */
+ rc = i2c_transfer(psu->client->adapter, msg, 2);
+ if (rc < 0) {
+ mutex_unlock(&psu->input_history.update_lock);
+ return rc;
+ }
+
+ psu->input_history.byte_count = msgbuf1[0];
+ memcpy(psu->input_history.data, &msgbuf1[1],
+ CFFPS_INPUT_HISTORY_SIZE);
+ psu->input_history.last_update = jiffies;
+ }
+
+ mutex_unlock(&psu->input_history.update_lock);
+ }
+
+ return simple_read_from_buffer(buf, count, ppos,
+ psu->input_history.data,
+ psu->input_history.byte_count);
+}
+
+static ssize_t ibm_cffps_debugfs_op(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ u8 cmd;
+ int i, rc;
+ int *idxp = file->private_data;
+ int idx = *idxp;
+ struct ibm_cffps *psu = to_psu(idxp, idx);
+ char data[I2C_SMBUS_BLOCK_MAX] = { 0 };
+
+ switch (idx) {
+ case CFFPS_DEBUGFS_INPUT_HISTORY:
+ return ibm_cffps_read_input_history(psu, buf, count, ppos);
+ case CFFPS_DEBUGFS_FRU:
+ cmd = CFFPS_FRU_CMD;
+ break;
+ case CFFPS_DEBUGFS_PN:
+ cmd = CFFPS_PN_CMD;
+ break;
+ case CFFPS_DEBUGFS_SN:
+ cmd = CFFPS_SN_CMD;
+ break;
+ case CFFPS_DEBUGFS_CCIN:
+ rc = i2c_smbus_read_word_swapped(psu->client, CFFPS_CCIN_CMD);
+ if (rc < 0)
+ return rc;
+
+ rc = snprintf(data, 5, "%04X", rc);
+ goto done;
+ case CFFPS_DEBUGFS_FW:
+ for (i = 0; i < CFFPS_FW_NUM_BYTES; ++i) {
+ rc = i2c_smbus_read_byte_data(psu->client,
+ CFFPS_FW_CMD_START + i);
+ if (rc < 0)
+ return rc;
+
+ snprintf(&data[i * 2], 3, "%02X", rc);
+ }
+
+ rc = i * 2;
+ goto done;
+ default:
+ return -EINVAL;
+ }
+
+ rc = i2c_smbus_read_block_data(psu->client, cmd, data);
+ if (rc < 0)
+ return rc;
+
+done:
+ data[rc] = '\n';
+ rc += 2;
+
+ return simple_read_from_buffer(buf, count, ppos, data, rc);
+}
+
+static const struct file_operations ibm_cffps_fops = {
+ .llseek = noop_llseek,
+ .read = ibm_cffps_debugfs_op,
+ .open = simple_open,
+};
+
+static int ibm_cffps_read_byte_data(struct i2c_client *client, int page,
+ int reg)
+{
+ int rc, mfr;
+
+ switch (reg) {
+ case PMBUS_STATUS_VOUT:
+ case PMBUS_STATUS_IOUT:
+ case PMBUS_STATUS_TEMPERATURE:
+ case PMBUS_STATUS_FAN_12:
+ rc = pmbus_read_byte_data(client, page, reg);
+ if (rc < 0)
+ return rc;
+
+ mfr = pmbus_read_byte_data(client, page,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (mfr < 0)
+ /*
+ * Return the status register instead of an error,
+ * since we successfully read status.
+ */
+ return rc;
+
+ /* Add MFR_SPECIFIC bits to the standard pmbus status regs. */
+ if (reg == PMBUS_STATUS_FAN_12) {
+ if (mfr & CFFPS_MFR_FAN_FAULT)
+ rc |= PB_FAN_FAN1_FAULT;
+ } else if (reg == PMBUS_STATUS_TEMPERATURE) {
+ if (mfr & CFFPS_MFR_THERMAL_FAULT)
+ rc |= PB_TEMP_OT_FAULT;
+ } else if (reg == PMBUS_STATUS_VOUT) {
+ if (mfr & (CFFPS_MFR_OV_FAULT | CFFPS_MFR_VAUX_FAULT))
+ rc |= PB_VOLTAGE_OV_FAULT;
+ if (mfr & CFFPS_MFR_UV_FAULT)
+ rc |= PB_VOLTAGE_UV_FAULT;
+ } else if (reg == PMBUS_STATUS_IOUT) {
+ if (mfr & CFFPS_MFR_OC_FAULT)
+ rc |= PB_IOUT_OC_FAULT;
+ if (mfr & CFFPS_MFR_CURRENT_SHARE_WARNING)
+ rc |= PB_CURRENT_SHARE_FAULT;
+ }
+ break;
+ default:
+ rc = -ENODATA;
+ break;
+ }
+
+ return rc;
+}
+
+static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
+ int reg)
+{
+ int rc, mfr;
+
+ switch (reg) {
+ case PMBUS_STATUS_WORD:
+ rc = pmbus_read_word_data(client, page, reg);
+ if (rc < 0)
+ return rc;
+
+ mfr = pmbus_read_byte_data(client, page,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (mfr < 0)
+ /*
+ * Return the status register instead of an error,
+ * since we successfully read status.
+ */
+ return rc;
+
+ if (mfr & CFFPS_MFR_PS_KILL)
+ rc |= PB_STATUS_OFF;
+ break;
+ default:
+ rc = -ENODATA;
+ break;
+ }
+
+ return rc;
+}
+
+static int ibm_cffps_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ int rc;
+ struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led);
+
+ if (brightness == LED_OFF) {
+ psu->led_state = CFFPS_LED_OFF;
+ } else {
+ brightness = LED_FULL;
+ if (psu->led_state != CFFPS_LED_BLINK)
+ psu->led_state = CFFPS_LED_ON;
+ }
+
+ rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
+ psu->led_state);
+ if (rc < 0)
+ return rc;
+
+ led_cdev->brightness = brightness;
+
+ return 0;
+}
+
+static int ibm_cffps_led_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ int rc;
+ struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led);
+
+ psu->led_state = CFFPS_LED_BLINK;
+
+ if (led_cdev->brightness == LED_OFF)
+ return 0;
+
+ rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
+ CFFPS_LED_BLINK);
+ if (rc < 0)
+ return rc;
+
+ *delay_on = CFFPS_BLINK_RATE_MS;
+ *delay_off = CFFPS_BLINK_RATE_MS;
+
+ return 0;
+}
+
+static void ibm_cffps_create_led_class(struct ibm_cffps *psu)
+{
+ int rc;
+ struct i2c_client *client = psu->client;
+ struct device *dev = &client->dev;
+
+ snprintf(psu->led_name, sizeof(psu->led_name), "%s-%02x", client->name,
+ client->addr);
+ psu->led.name = psu->led_name;
+ psu->led.max_brightness = LED_FULL;
+ psu->led.brightness_set_blocking = ibm_cffps_led_brightness_set;
+ psu->led.blink_set = ibm_cffps_led_blink_set;
+
+ rc = devm_led_classdev_register(dev, &psu->led);
+ if (rc)
+ dev_warn(dev, "failed to register led class: %d\n", rc);
+}
+
+static struct pmbus_driver_info ibm_cffps_info = {
+ .pages = 1,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+ PMBUS_HAVE_PIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP |
+ PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
+ PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
+ .read_byte_data = ibm_cffps_read_byte_data,
+ .read_word_data = ibm_cffps_read_word_data,
+};
+
+static struct pmbus_platform_data ibm_cffps_pdata = {
+ .flags = PMBUS_SKIP_STATUS_CHECK,
+};
+
+static int ibm_cffps_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int i, rc;
+ struct dentry *debugfs;
+ struct dentry *ibm_cffps_dir;
+ struct ibm_cffps *psu;
+
+ client->dev.platform_data = &ibm_cffps_pdata;
+ rc = pmbus_do_probe(client, id, &ibm_cffps_info);
+ if (rc)
+ return rc;
+
+ /*
+ * Don't fail the probe if there isn't enough memory for leds and
+ * debugfs.
+ */
+ psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
+ if (!psu)
+ return 0;
+
+ psu->client = client;
+ mutex_init(&psu->input_history.update_lock);
+ psu->input_history.last_update = jiffies - HZ;
+
+ ibm_cffps_create_led_class(psu);
+
+ /* Don't fail the probe if we can't create debugfs */
+ debugfs = pmbus_get_debugfs_dir(client);
+ if (!debugfs)
+ return 0;
+
+ ibm_cffps_dir = debugfs_create_dir(client->name, debugfs);
+ if (!ibm_cffps_dir)
+ return 0;
+
+ for (i = 0; i < CFFPS_DEBUGFS_NUM_ENTRIES; ++i)
+ psu->debugfs_entries[i] = i;
+
+ debugfs_create_file("input_history", 0444, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_INPUT_HISTORY],
+ &ibm_cffps_fops);
+ debugfs_create_file("fru", 0444, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_FRU],
+ &ibm_cffps_fops);
+ debugfs_create_file("part_number", 0444, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_PN],
+ &ibm_cffps_fops);
+ debugfs_create_file("serial_number", 0444, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_SN],
+ &ibm_cffps_fops);
+ debugfs_create_file("ccin", 0444, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_CCIN],
+ &ibm_cffps_fops);
+ debugfs_create_file("fw_version", 0444, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_FW],
+ &ibm_cffps_fops);
+
+ return 0;
+}
+
+static const struct i2c_device_id ibm_cffps_id[] = {
+ { "ibm_cffps1", 1 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ibm_cffps_id);
+
+static const struct of_device_id ibm_cffps_of_match[] = {
+ { .compatible = "ibm,cffps1" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ibm_cffps_of_match);
+
+static struct i2c_driver ibm_cffps_driver = {
+ .driver = {
+ .name = "ibm-cffps",
+ .of_match_table = ibm_cffps_of_match,
+ },
+ .probe = ibm_cffps_probe,
+ .remove = pmbus_do_remove,
+ .id_table = ibm_cffps_id,
+};
+
+module_i2c_driver(ibm_cffps_driver);
+
+MODULE_AUTHOR("Eddie James");
+MODULE_DESCRIPTION("PMBus driver for IBM Common Form Factor power supplies");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/ir35221.c b/drivers/hwmon/pmbus/ir35221.c
new file mode 100644
index 000000000..977315b0f
--- /dev/null
+++ b/drivers/hwmon/pmbus/ir35221.c
@@ -0,0 +1,148 @@
+/*
+ * Hardware monitoring driver for IR35221
+ *
+ * Copyright (C) IBM Corporation 2017.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define IR35221_MFR_VIN_PEAK 0xc5
+#define IR35221_MFR_VOUT_PEAK 0xc6
+#define IR35221_MFR_IOUT_PEAK 0xc7
+#define IR35221_MFR_TEMP_PEAK 0xc8
+#define IR35221_MFR_VIN_VALLEY 0xc9
+#define IR35221_MFR_VOUT_VALLEY 0xca
+#define IR35221_MFR_IOUT_VALLEY 0xcb
+#define IR35221_MFR_TEMP_VALLEY 0xcc
+
+static int ir35221_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VIN_MAX:
+ ret = pmbus_read_word_data(client, page, IR35221_MFR_VIN_PEAK);
+ break;
+ case PMBUS_VIRT_READ_VOUT_MAX:
+ ret = pmbus_read_word_data(client, page, IR35221_MFR_VOUT_PEAK);
+ break;
+ case PMBUS_VIRT_READ_IOUT_MAX:
+ ret = pmbus_read_word_data(client, page, IR35221_MFR_IOUT_PEAK);
+ break;
+ case PMBUS_VIRT_READ_TEMP_MAX:
+ ret = pmbus_read_word_data(client, page, IR35221_MFR_TEMP_PEAK);
+ break;
+ case PMBUS_VIRT_READ_VIN_MIN:
+ ret = pmbus_read_word_data(client, page,
+ IR35221_MFR_VIN_VALLEY);
+ break;
+ case PMBUS_VIRT_READ_VOUT_MIN:
+ ret = pmbus_read_word_data(client, page,
+ IR35221_MFR_VOUT_VALLEY);
+ break;
+ case PMBUS_VIRT_READ_IOUT_MIN:
+ ret = pmbus_read_word_data(client, page,
+ IR35221_MFR_IOUT_VALLEY);
+ break;
+ case PMBUS_VIRT_READ_TEMP_MIN:
+ ret = pmbus_read_word_data(client, page,
+ IR35221_MFR_TEMP_VALLEY);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+
+ return ret;
+}
+
+static int ir35221_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pmbus_driver_info *info;
+ u8 buf[I2C_SMBUS_BLOCK_MAX];
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE_DATA
+ | I2C_FUNC_SMBUS_READ_WORD_DATA
+ | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read PMBUS_MFR_ID\n");
+ return ret;
+ }
+ if (ret != 2 || strncmp(buf, "RI", strlen("RI"))) {
+ dev_err(&client->dev, "MFR_ID unrecognised\n");
+ return -ENODEV;
+ }
+
+ ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read PMBUS_MFR_MODEL\n");
+ return ret;
+ }
+ if (ret != 2 || !(buf[0] == 0x6c && buf[1] == 0x00)) {
+ dev_err(&client->dev, "MFR_MODEL unrecognised\n");
+ return -ENODEV;
+ }
+
+ info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->read_word_data = ir35221_read_word_data;
+
+ info->pages = 2;
+ info->format[PSC_VOLTAGE_IN] = linear;
+ info->format[PSC_VOLTAGE_OUT] = linear;
+ info->format[PSC_CURRENT_IN] = linear;
+ info->format[PSC_CURRENT_OUT] = linear;
+ info->format[PSC_POWER] = linear;
+ info->format[PSC_TEMPERATURE] = linear;
+
+ info->func[0] = PMBUS_HAVE_VIN
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
+ | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+ | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP;
+ info->func[1] = info->func[0];
+
+ return pmbus_do_probe(client, id, info);
+}
+
+static const struct i2c_device_id ir35221_id[] = {
+ {"ir35221", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, ir35221_id);
+
+static struct i2c_driver ir35221_driver = {
+ .driver = {
+ .name = "ir35221",
+ },
+ .probe = ir35221_probe,
+ .remove = pmbus_do_remove,
+ .id_table = ir35221_id,
+};
+
+module_i2c_driver(ir35221_driver);
+
+MODULE_AUTHOR("Samuel Mendoza-Jonas <sam@mendozajonas.com");
+MODULE_DESCRIPTION("PMBus driver for IR35221");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c
new file mode 100644
index 000000000..e25b80149
--- /dev/null
+++ b/drivers/hwmon/pmbus/lm25066.c
@@ -0,0 +1,530 @@
+/*
+ * Hardware monitoring driver for LM25056 / LM25066 / LM5064 / LM5066
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2013 Guenter Roeck
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+enum chips { lm25056, lm25066, lm5064, lm5066, lm5066i };
+
+#define LM25066_READ_VAUX 0xd0
+#define LM25066_MFR_READ_IIN 0xd1
+#define LM25066_MFR_READ_PIN 0xd2
+#define LM25066_MFR_IIN_OC_WARN_LIMIT 0xd3
+#define LM25066_MFR_PIN_OP_WARN_LIMIT 0xd4
+#define LM25066_READ_PIN_PEAK 0xd5
+#define LM25066_CLEAR_PIN_PEAK 0xd6
+#define LM25066_DEVICE_SETUP 0xd9
+#define LM25066_READ_AVG_VIN 0xdc
+#define LM25066_READ_AVG_VOUT 0xdd
+#define LM25066_READ_AVG_IIN 0xde
+#define LM25066_READ_AVG_PIN 0xdf
+
+#define LM25066_DEV_SETUP_CL BIT(4) /* Current limit */
+
+/* LM25056 only */
+
+#define LM25056_VAUX_OV_WARN_LIMIT 0xe3
+#define LM25056_VAUX_UV_WARN_LIMIT 0xe4
+
+#define LM25056_MFR_STS_VAUX_OV_WARN BIT(1)
+#define LM25056_MFR_STS_VAUX_UV_WARN BIT(0)
+
+struct __coeff {
+ short m, b, R;
+};
+
+#define PSC_CURRENT_IN_L (PSC_NUM_CLASSES)
+#define PSC_POWER_L (PSC_NUM_CLASSES + 1)
+
+static struct __coeff lm25066_coeff[][PSC_NUM_CLASSES + 2] = {
+ [lm25056] = {
+ [PSC_VOLTAGE_IN] = {
+ .m = 16296,
+ .b = 1343,
+ .R = -2,
+ },
+ [PSC_CURRENT_IN] = {
+ .m = 13797,
+ .b = -1833,
+ .R = -2,
+ },
+ [PSC_CURRENT_IN_L] = {
+ .m = 6726,
+ .b = -537,
+ .R = -2,
+ },
+ [PSC_POWER] = {
+ .m = 5501,
+ .b = -2908,
+ .R = -3,
+ },
+ [PSC_POWER_L] = {
+ .m = 26882,
+ .b = -5646,
+ .R = -4,
+ },
+ [PSC_TEMPERATURE] = {
+ .m = 1580,
+ .b = -14500,
+ .R = -2,
+ },
+ },
+ [lm25066] = {
+ [PSC_VOLTAGE_IN] = {
+ .m = 22070,
+ .b = -1800,
+ .R = -2,
+ },
+ [PSC_VOLTAGE_OUT] = {
+ .m = 22070,
+ .b = -1800,
+ .R = -2,
+ },
+ [PSC_CURRENT_IN] = {
+ .m = 13661,
+ .b = -5200,
+ .R = -2,
+ },
+ [PSC_CURRENT_IN_L] = {
+ .m = 6852,
+ .b = -3100,
+ .R = -2,
+ },
+ [PSC_POWER] = {
+ .m = 736,
+ .b = -3300,
+ .R = -2,
+ },
+ [PSC_POWER_L] = {
+ .m = 369,
+ .b = -1900,
+ .R = -2,
+ },
+ [PSC_TEMPERATURE] = {
+ .m = 16,
+ },
+ },
+ [lm5064] = {
+ [PSC_VOLTAGE_IN] = {
+ .m = 4611,
+ .b = -642,
+ .R = -2,
+ },
+ [PSC_VOLTAGE_OUT] = {
+ .m = 4621,
+ .b = 423,
+ .R = -2,
+ },
+ [PSC_CURRENT_IN] = {
+ .m = 10742,
+ .b = 1552,
+ .R = -2,
+ },
+ [PSC_CURRENT_IN_L] = {
+ .m = 5456,
+ .b = 2118,
+ .R = -2,
+ },
+ [PSC_POWER] = {
+ .m = 1204,
+ .b = 8524,
+ .R = -3,
+ },
+ [PSC_POWER_L] = {
+ .m = 612,
+ .b = 11202,
+ .R = -3,
+ },
+ [PSC_TEMPERATURE] = {
+ .m = 16,
+ },
+ },
+ [lm5066] = {
+ [PSC_VOLTAGE_IN] = {
+ .m = 4587,
+ .b = -1200,
+ .R = -2,
+ },
+ [PSC_VOLTAGE_OUT] = {
+ .m = 4587,
+ .b = -2400,
+ .R = -2,
+ },
+ [PSC_CURRENT_IN] = {
+ .m = 10753,
+ .b = -1200,
+ .R = -2,
+ },
+ [PSC_CURRENT_IN_L] = {
+ .m = 5405,
+ .b = -600,
+ .R = -2,
+ },
+ [PSC_POWER] = {
+ .m = 1204,
+ .b = -6000,
+ .R = -3,
+ },
+ [PSC_POWER_L] = {
+ .m = 605,
+ .b = -8000,
+ .R = -3,
+ },
+ [PSC_TEMPERATURE] = {
+ .m = 16,
+ },
+ },
+ [lm5066i] = {
+ [PSC_VOLTAGE_IN] = {
+ .m = 4617,
+ .b = -140,
+ .R = -2,
+ },
+ [PSC_VOLTAGE_OUT] = {
+ .m = 4602,
+ .b = 500,
+ .R = -2,
+ },
+ [PSC_CURRENT_IN] = {
+ .m = 15076,
+ .b = -504,
+ .R = -2,
+ },
+ [PSC_CURRENT_IN_L] = {
+ .m = 7645,
+ .b = 100,
+ .R = -2,
+ },
+ [PSC_POWER] = {
+ .m = 1701,
+ .b = -4000,
+ .R = -3,
+ },
+ [PSC_POWER_L] = {
+ .m = 861,
+ .b = -965,
+ .R = -3,
+ },
+ [PSC_TEMPERATURE] = {
+ .m = 16,
+ },
+ },
+};
+
+struct lm25066_data {
+ int id;
+ u16 rlimit; /* Maximum register value */
+ struct pmbus_driver_info info;
+};
+
+#define to_lm25066_data(x) container_of(x, struct lm25066_data, info)
+
+static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct lm25066_data *data = to_lm25066_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VMON:
+ ret = pmbus_read_word_data(client, 0, LM25066_READ_VAUX);
+ if (ret < 0)
+ break;
+ /* Adjust returned value to match VIN coefficients */
+ switch (data->id) {
+ case lm25056:
+ /* VIN: 6.14 mV VAUX: 293 uV LSB */
+ ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
+ break;
+ case lm25066:
+ /* VIN: 4.54 mV VAUX: 283.2 uV LSB */
+ ret = DIV_ROUND_CLOSEST(ret * 2832, 45400);
+ break;
+ case lm5064:
+ /* VIN: 4.53 mV VAUX: 700 uV LSB */
+ ret = DIV_ROUND_CLOSEST(ret * 70, 453);
+ break;
+ case lm5066:
+ case lm5066i:
+ /* VIN: 2.18 mV VAUX: 725 uV LSB */
+ ret = DIV_ROUND_CLOSEST(ret * 725, 2180);
+ break;
+ }
+ break;
+ case PMBUS_READ_IIN:
+ ret = pmbus_read_word_data(client, 0, LM25066_MFR_READ_IIN);
+ break;
+ case PMBUS_READ_PIN:
+ ret = pmbus_read_word_data(client, 0, LM25066_MFR_READ_PIN);
+ break;
+ case PMBUS_IIN_OC_WARN_LIMIT:
+ ret = pmbus_read_word_data(client, 0,
+ LM25066_MFR_IIN_OC_WARN_LIMIT);
+ break;
+ case PMBUS_PIN_OP_WARN_LIMIT:
+ ret = pmbus_read_word_data(client, 0,
+ LM25066_MFR_PIN_OP_WARN_LIMIT);
+ break;
+ case PMBUS_VIRT_READ_VIN_AVG:
+ ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_VIN);
+ break;
+ case PMBUS_VIRT_READ_VOUT_AVG:
+ ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_VOUT);
+ break;
+ case PMBUS_VIRT_READ_IIN_AVG:
+ ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_IIN);
+ break;
+ case PMBUS_VIRT_READ_PIN_AVG:
+ ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_PIN);
+ break;
+ case PMBUS_VIRT_READ_PIN_MAX:
+ ret = pmbus_read_word_data(client, 0, LM25066_READ_PIN_PEAK);
+ break;
+ case PMBUS_VIRT_RESET_PIN_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int lm25056_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ ret = pmbus_read_word_data(client, 0,
+ LM25056_VAUX_UV_WARN_LIMIT);
+ if (ret < 0)
+ break;
+ /* Adjust returned value to match VIN coefficients */
+ ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
+ break;
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ ret = pmbus_read_word_data(client, 0,
+ LM25056_VAUX_OV_WARN_LIMIT);
+ if (ret < 0)
+ break;
+ /* Adjust returned value to match VIN coefficients */
+ ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
+ break;
+ default:
+ ret = lm25066_read_word_data(client, page, reg);
+ break;
+ }
+ return ret;
+}
+
+static int lm25056_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ int ret, s;
+
+ switch (reg) {
+ case PMBUS_VIRT_STATUS_VMON:
+ ret = pmbus_read_byte_data(client, 0,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (ret < 0)
+ break;
+ s = 0;
+ if (ret & LM25056_MFR_STS_VAUX_UV_WARN)
+ s |= PB_VOLTAGE_UV_WARNING;
+ if (ret & LM25056_MFR_STS_VAUX_OV_WARN)
+ s |= PB_VOLTAGE_OV_WARNING;
+ ret = s;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
+ u16 word)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct lm25066_data *data = to_lm25066_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_POUT_OP_FAULT_LIMIT:
+ case PMBUS_POUT_OP_WARN_LIMIT:
+ case PMBUS_VOUT_UV_WARN_LIMIT:
+ case PMBUS_OT_FAULT_LIMIT:
+ case PMBUS_OT_WARN_LIMIT:
+ case PMBUS_IIN_OC_FAULT_LIMIT:
+ case PMBUS_VIN_UV_WARN_LIMIT:
+ case PMBUS_VIN_UV_FAULT_LIMIT:
+ case PMBUS_VIN_OV_FAULT_LIMIT:
+ case PMBUS_VIN_OV_WARN_LIMIT:
+ word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
+ ret = pmbus_write_word_data(client, 0, reg, word);
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_IIN_OC_WARN_LIMIT:
+ word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
+ ret = pmbus_write_word_data(client, 0,
+ LM25066_MFR_IIN_OC_WARN_LIMIT,
+ word);
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_PIN_OP_WARN_LIMIT:
+ word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
+ ret = pmbus_write_word_data(client, 0,
+ LM25066_MFR_PIN_OP_WARN_LIMIT,
+ word);
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ /* Adjust from VIN coefficients (for LM25056) */
+ word = DIV_ROUND_CLOSEST((int)word * 6140, 293);
+ word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
+ ret = pmbus_write_word_data(client, 0,
+ LM25056_VAUX_UV_WARN_LIMIT, word);
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ /* Adjust from VIN coefficients (for LM25056) */
+ word = DIV_ROUND_CLOSEST((int)word * 6140, 293);
+ word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
+ ret = pmbus_write_word_data(client, 0,
+ LM25056_VAUX_OV_WARN_LIMIT, word);
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_RESET_PIN_HISTORY:
+ ret = pmbus_write_byte(client, 0, LM25066_CLEAR_PIN_PEAK);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int lm25066_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int config;
+ struct lm25066_data *data;
+ struct pmbus_driver_info *info;
+ struct __coeff *coeff;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE_DATA))
+ return -ENODEV;
+
+ data = devm_kzalloc(&client->dev, sizeof(struct lm25066_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ config = i2c_smbus_read_byte_data(client, LM25066_DEVICE_SETUP);
+ if (config < 0)
+ return config;
+
+ data->id = id->driver_data;
+ info = &data->info;
+
+ info->pages = 1;
+ info->format[PSC_VOLTAGE_IN] = direct;
+ info->format[PSC_VOLTAGE_OUT] = direct;
+ info->format[PSC_CURRENT_IN] = direct;
+ info->format[PSC_TEMPERATURE] = direct;
+ info->format[PSC_POWER] = direct;
+
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VMON
+ | PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+
+ if (data->id == lm25056) {
+ info->func[0] |= PMBUS_HAVE_STATUS_VMON;
+ info->read_word_data = lm25056_read_word_data;
+ info->read_byte_data = lm25056_read_byte_data;
+ data->rlimit = 0x0fff;
+ } else {
+ info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ info->read_word_data = lm25066_read_word_data;
+ data->rlimit = 0x0fff;
+ }
+ info->write_word_data = lm25066_write_word_data;
+
+ coeff = &lm25066_coeff[data->id][0];
+ info->m[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].m;
+ info->b[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].b;
+ info->R[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].R;
+ info->m[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].m;
+ info->b[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].b;
+ info->R[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].R;
+ info->m[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].m;
+ info->b[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].b;
+ info->R[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].R;
+ info->R[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].R;
+ info->R[PSC_POWER] = coeff[PSC_POWER].R;
+ if (config & LM25066_DEV_SETUP_CL) {
+ info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].m;
+ info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].b;
+ info->m[PSC_POWER] = coeff[PSC_POWER_L].m;
+ info->b[PSC_POWER] = coeff[PSC_POWER_L].b;
+ } else {
+ info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].m;
+ info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].b;
+ info->m[PSC_POWER] = coeff[PSC_POWER].m;
+ info->b[PSC_POWER] = coeff[PSC_POWER].b;
+ }
+
+ return pmbus_do_probe(client, id, info);
+}
+
+static const struct i2c_device_id lm25066_id[] = {
+ {"lm25056", lm25056},
+ {"lm25066", lm25066},
+ {"lm5064", lm5064},
+ {"lm5066", lm5066},
+ {"lm5066i", lm5066i},
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, lm25066_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver lm25066_driver = {
+ .driver = {
+ .name = "lm25066",
+ },
+ .probe = lm25066_probe,
+ .remove = pmbus_do_remove,
+ .id_table = lm25066_id,
+};
+
+module_i2c_driver(lm25066_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for LM25066 and compatible chips");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
new file mode 100644
index 000000000..94eea2ac6
--- /dev/null
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -0,0 +1,792 @@
+/*
+ * Hardware monitoring driver for LTC2978 and compatible chips.
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2013, 2014, 2015 Guenter Roeck
+ * Copyright (c) 2015 Linear Technology
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/regulator/driver.h>
+#include "pmbus.h"
+
+enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
+ ltc3883, ltc3886, ltc3887, ltm2987, ltm4675, ltm4676 };
+
+/* Common for all chips */
+#define LTC2978_MFR_VOUT_PEAK 0xdd
+#define LTC2978_MFR_VIN_PEAK 0xde
+#define LTC2978_MFR_TEMPERATURE_PEAK 0xdf
+#define LTC2978_MFR_SPECIAL_ID 0xe7 /* Undocumented on LTC3882 */
+#define LTC2978_MFR_COMMON 0xef
+
+/* LTC2974, LTC2975, LCT2977, LTC2980, LTC2978, and LTM2987 */
+#define LTC2978_MFR_VOUT_MIN 0xfb
+#define LTC2978_MFR_VIN_MIN 0xfc
+#define LTC2978_MFR_TEMPERATURE_MIN 0xfd
+
+/* LTC2974, LTC2975 */
+#define LTC2974_MFR_IOUT_PEAK 0xd7
+#define LTC2974_MFR_IOUT_MIN 0xd8
+
+/* LTC3880, LTC3882, LTC3883, LTC3887, LTM4675, and LTM4676 */
+#define LTC3880_MFR_IOUT_PEAK 0xd7
+#define LTC3880_MFR_CLEAR_PEAKS 0xe3
+#define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4
+
+/* LTC3883 and LTC3886 only */
+#define LTC3883_MFR_IIN_PEAK 0xe1
+
+/* LTC2975 only */
+#define LTC2975_MFR_IIN_PEAK 0xc4
+#define LTC2975_MFR_IIN_MIN 0xc5
+#define LTC2975_MFR_PIN_PEAK 0xc6
+#define LTC2975_MFR_PIN_MIN 0xc7
+
+#define LTC2978_ID_MASK 0xfff0
+
+#define LTC2974_ID 0x0210
+#define LTC2975_ID 0x0220
+#define LTC2977_ID 0x0130
+#define LTC2978_ID_REV1 0x0110 /* Early revision */
+#define LTC2978_ID_REV2 0x0120
+#define LTC2980_ID_A 0x8030 /* A/B for two die IDs */
+#define LTC2980_ID_B 0x8040
+#define LTC3880_ID 0x4020
+#define LTC3882_ID 0x4200
+#define LTC3882_ID_D1 0x4240 /* Dash 1 */
+#define LTC3883_ID 0x4300
+#define LTC3886_ID 0x4600
+#define LTC3887_ID 0x4700
+#define LTM2987_ID_A 0x8010 /* A/B for two die IDs */
+#define LTM2987_ID_B 0x8020
+#define LTM4675_ID 0x47a0
+#define LTM4676_ID_REV1 0x4400
+#define LTM4676_ID_REV2 0x4480
+#define LTM4676A_ID 0x47e0
+
+#define LTC2974_NUM_PAGES 4
+#define LTC2978_NUM_PAGES 8
+#define LTC3880_NUM_PAGES 2
+#define LTC3883_NUM_PAGES 1
+
+#define LTC_POLL_TIMEOUT 100 /* in milli-seconds */
+
+#define LTC_NOT_BUSY BIT(6)
+#define LTC_NOT_PENDING BIT(5)
+
+/*
+ * LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which
+ * happens pretty much each time chip data is updated. Raw peak data therefore
+ * does not provide much value. To be able to provide useful peak data, keep an
+ * internal cache of measured peak data, which is only cleared if an explicit
+ * "clear peak" command is executed for the sensor in question.
+ */
+
+struct ltc2978_data {
+ enum chips id;
+ u16 vin_min, vin_max;
+ u16 temp_min[LTC2974_NUM_PAGES], temp_max[LTC2974_NUM_PAGES];
+ u16 vout_min[LTC2978_NUM_PAGES], vout_max[LTC2978_NUM_PAGES];
+ u16 iout_min[LTC2974_NUM_PAGES], iout_max[LTC2974_NUM_PAGES];
+ u16 iin_min, iin_max;
+ u16 pin_min, pin_max;
+ u16 temp2_max;
+ struct pmbus_driver_info info;
+ u32 features;
+};
+#define to_ltc2978_data(x) container_of(x, struct ltc2978_data, info)
+
+#define FEAT_CLEAR_PEAKS BIT(0)
+#define FEAT_NEEDS_POLLING BIT(1)
+
+#define has_clear_peaks(d) ((d)->features & FEAT_CLEAR_PEAKS)
+#define needs_polling(d) ((d)->features & FEAT_NEEDS_POLLING)
+
+static int ltc_wait_ready(struct i2c_client *client)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(LTC_POLL_TIMEOUT);
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int status;
+ u8 mask;
+
+ if (!needs_polling(data))
+ return 0;
+
+ /*
+ * LTC3883 does not support LTC_NOT_PENDING, even though
+ * the datasheet claims that it does.
+ */
+ mask = LTC_NOT_BUSY;
+ if (data->id != ltc3883)
+ mask |= LTC_NOT_PENDING;
+
+ do {
+ status = pmbus_read_byte_data(client, 0, LTC2978_MFR_COMMON);
+ if (status == -EBADMSG || status == -ENXIO) {
+ /* PEC error or NACK: chip may be busy, try again */
+ usleep_range(50, 100);
+ continue;
+ }
+ if (status < 0)
+ return status;
+
+ if ((status & mask) == mask)
+ return 0;
+
+ usleep_range(50, 100);
+ } while (time_before(jiffies, timeout));
+
+ return -ETIMEDOUT;
+}
+
+static int ltc_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ int ret;
+
+ ret = ltc_wait_ready(client);
+ if (ret < 0)
+ return ret;
+
+ return pmbus_read_word_data(client, page, reg);
+}
+
+static int ltc_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ int ret;
+
+ ret = ltc_wait_ready(client);
+ if (ret < 0)
+ return ret;
+
+ return pmbus_read_byte_data(client, page, reg);
+}
+
+static int ltc_write_byte(struct i2c_client *client, int page, u8 byte)
+{
+ int ret;
+
+ ret = ltc_wait_ready(client);
+ if (ret < 0)
+ return ret;
+
+ return pmbus_write_byte(client, page, byte);
+}
+
+static inline int lin11_to_val(int data)
+{
+ s16 e = ((s16)data) >> 11;
+ s32 m = (((s16)(data << 5)) >> 5);
+
+ /*
+ * mantissa is 10 bit + sign, exponent adds up to 15 bit.
+ * Add 6 bit to exponent for maximum accuracy (10 + 15 + 6 = 31).
+ */
+ e += 6;
+ return (e < 0 ? m >> -e : m << e);
+}
+
+static int ltc_get_max(struct ltc2978_data *data, struct i2c_client *client,
+ int page, int reg, u16 *pmax)
+{
+ int ret;
+
+ ret = ltc_read_word_data(client, page, reg);
+ if (ret >= 0) {
+ if (lin11_to_val(ret) > lin11_to_val(*pmax))
+ *pmax = ret;
+ ret = *pmax;
+ }
+ return ret;
+}
+
+static int ltc_get_min(struct ltc2978_data *data, struct i2c_client *client,
+ int page, int reg, u16 *pmin)
+{
+ int ret;
+
+ ret = ltc_read_word_data(client, page, reg);
+ if (ret >= 0) {
+ if (lin11_to_val(ret) < lin11_to_val(*pmin))
+ *pmin = ret;
+ ret = *pmin;
+ }
+ return ret;
+}
+
+static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
+ int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VIN_MAX:
+ ret = ltc_get_max(data, client, page, LTC2978_MFR_VIN_PEAK,
+ &data->vin_max);
+ break;
+ case PMBUS_VIRT_READ_VOUT_MAX:
+ ret = ltc_read_word_data(client, page, LTC2978_MFR_VOUT_PEAK);
+ if (ret >= 0) {
+ /*
+ * VOUT is 16 bit unsigned with fixed exponent,
+ * so we can compare it directly
+ */
+ if (ret > data->vout_max[page])
+ data->vout_max[page] = ret;
+ ret = data->vout_max[page];
+ }
+ break;
+ case PMBUS_VIRT_READ_TEMP_MAX:
+ ret = ltc_get_max(data, client, page,
+ LTC2978_MFR_TEMPERATURE_PEAK,
+ &data->temp_max[page]);
+ break;
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ case PMBUS_VIRT_RESET_VIN_HISTORY:
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = ltc_wait_ready(client);
+ if (ret < 0)
+ return ret;
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VIN_MIN:
+ ret = ltc_get_min(data, client, page, LTC2978_MFR_VIN_MIN,
+ &data->vin_min);
+ break;
+ case PMBUS_VIRT_READ_VOUT_MIN:
+ ret = ltc_read_word_data(client, page, LTC2978_MFR_VOUT_MIN);
+ if (ret >= 0) {
+ /*
+ * VOUT_MIN is known to not be supported on some lots
+ * of LTC2978 revision 1, and will return the maximum
+ * possible voltage if read. If VOUT_MAX is valid and
+ * lower than the reading of VOUT_MIN, use it instead.
+ */
+ if (data->vout_max[page] && ret > data->vout_max[page])
+ ret = data->vout_max[page];
+ if (ret < data->vout_min[page])
+ data->vout_min[page] = ret;
+ ret = data->vout_min[page];
+ }
+ break;
+ case PMBUS_VIRT_READ_TEMP_MIN:
+ ret = ltc_get_min(data, client, page,
+ LTC2978_MFR_TEMPERATURE_MIN,
+ &data->temp_min[page]);
+ break;
+ case PMBUS_VIRT_READ_IOUT_MAX:
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ case PMBUS_VIRT_READ_TEMP2_MAX:
+ case PMBUS_VIRT_RESET_TEMP2_HISTORY:
+ ret = -ENXIO;
+ break;
+ default:
+ ret = ltc2978_read_word_data_common(client, page, reg);
+ break;
+ }
+ return ret;
+}
+
+static int ltc2974_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_IOUT_MAX:
+ ret = ltc_get_max(data, client, page, LTC2974_MFR_IOUT_PEAK,
+ &data->iout_max[page]);
+ break;
+ case PMBUS_VIRT_READ_IOUT_MIN:
+ ret = ltc_get_min(data, client, page, LTC2974_MFR_IOUT_MIN,
+ &data->iout_min[page]);
+ break;
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = ltc2978_read_word_data(client, page, reg);
+ break;
+ }
+ return ret;
+}
+
+static int ltc2975_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_IIN_MAX:
+ ret = ltc_get_max(data, client, page, LTC2975_MFR_IIN_PEAK,
+ &data->iin_max);
+ break;
+ case PMBUS_VIRT_READ_IIN_MIN:
+ ret = ltc_get_min(data, client, page, LTC2975_MFR_IIN_MIN,
+ &data->iin_min);
+ break;
+ case PMBUS_VIRT_READ_PIN_MAX:
+ ret = ltc_get_max(data, client, page, LTC2975_MFR_PIN_PEAK,
+ &data->pin_max);
+ break;
+ case PMBUS_VIRT_READ_PIN_MIN:
+ ret = ltc_get_min(data, client, page, LTC2975_MFR_PIN_MIN,
+ &data->pin_min);
+ break;
+ case PMBUS_VIRT_RESET_IIN_HISTORY:
+ case PMBUS_VIRT_RESET_PIN_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = ltc2978_read_word_data(client, page, reg);
+ break;
+ }
+ return ret;
+}
+
+static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_IOUT_MAX:
+ ret = ltc_get_max(data, client, page, LTC3880_MFR_IOUT_PEAK,
+ &data->iout_max[page]);
+ break;
+ case PMBUS_VIRT_READ_TEMP2_MAX:
+ ret = ltc_get_max(data, client, page,
+ LTC3880_MFR_TEMPERATURE2_PEAK,
+ &data->temp2_max);
+ break;
+ case PMBUS_VIRT_READ_VIN_MIN:
+ case PMBUS_VIRT_READ_VOUT_MIN:
+ case PMBUS_VIRT_READ_TEMP_MIN:
+ ret = -ENXIO;
+ break;
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ case PMBUS_VIRT_RESET_TEMP2_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = ltc2978_read_word_data_common(client, page, reg);
+ break;
+ }
+ return ret;
+}
+
+static int ltc3883_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_IIN_MAX:
+ ret = ltc_get_max(data, client, page, LTC3883_MFR_IIN_PEAK,
+ &data->iin_max);
+ break;
+ case PMBUS_VIRT_RESET_IIN_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = ltc3880_read_word_data(client, page, reg);
+ break;
+ }
+ return ret;
+}
+
+static int ltc2978_clear_peaks(struct ltc2978_data *data,
+ struct i2c_client *client, int page)
+{
+ int ret;
+
+ if (has_clear_peaks(data))
+ ret = ltc_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS);
+ else
+ ret = ltc_write_byte(client, page, PMBUS_CLEAR_FAULTS);
+
+ return ret;
+}
+
+static int ltc2978_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_RESET_IIN_HISTORY:
+ data->iin_max = 0x7c00;
+ data->iin_min = 0x7bff;
+ ret = ltc2978_clear_peaks(data, client, 0);
+ break;
+ case PMBUS_VIRT_RESET_PIN_HISTORY:
+ data->pin_max = 0x7c00;
+ data->pin_min = 0x7bff;
+ ret = ltc2978_clear_peaks(data, client, 0);
+ break;
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ data->iout_max[page] = 0x7c00;
+ data->iout_min[page] = 0xfbff;
+ ret = ltc2978_clear_peaks(data, client, page);
+ break;
+ case PMBUS_VIRT_RESET_TEMP2_HISTORY:
+ data->temp2_max = 0x7c00;
+ ret = ltc2978_clear_peaks(data, client, page);
+ break;
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ data->vout_min[page] = 0xffff;
+ data->vout_max[page] = 0;
+ ret = ltc2978_clear_peaks(data, client, page);
+ break;
+ case PMBUS_VIRT_RESET_VIN_HISTORY:
+ data->vin_min = 0x7bff;
+ data->vin_max = 0x7c00;
+ ret = ltc2978_clear_peaks(data, client, page);
+ break;
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ data->temp_min[page] = 0x7bff;
+ data->temp_max[page] = 0x7c00;
+ ret = ltc2978_clear_peaks(data, client, page);
+ break;
+ default:
+ ret = ltc_wait_ready(client);
+ if (ret < 0)
+ return ret;
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static const struct i2c_device_id ltc2978_id[] = {
+ {"ltc2974", ltc2974},
+ {"ltc2975", ltc2975},
+ {"ltc2977", ltc2977},
+ {"ltc2978", ltc2978},
+ {"ltc2980", ltc2980},
+ {"ltc3880", ltc3880},
+ {"ltc3882", ltc3882},
+ {"ltc3883", ltc3883},
+ {"ltc3886", ltc3886},
+ {"ltc3887", ltc3887},
+ {"ltm2987", ltm2987},
+ {"ltm4675", ltm4675},
+ {"ltm4676", ltm4676},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ltc2978_id);
+
+#if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
+static const struct regulator_desc ltc2978_reg_desc[] = {
+ PMBUS_REGULATOR("vout", 0),
+ PMBUS_REGULATOR("vout", 1),
+ PMBUS_REGULATOR("vout", 2),
+ PMBUS_REGULATOR("vout", 3),
+ PMBUS_REGULATOR("vout", 4),
+ PMBUS_REGULATOR("vout", 5),
+ PMBUS_REGULATOR("vout", 6),
+ PMBUS_REGULATOR("vout", 7),
+};
+#endif /* CONFIG_SENSORS_LTC2978_REGULATOR */
+
+static int ltc2978_get_id(struct i2c_client *client)
+{
+ int chip_id;
+
+ chip_id = i2c_smbus_read_word_data(client, LTC2978_MFR_SPECIAL_ID);
+ if (chip_id < 0) {
+ const struct i2c_device_id *id;
+ u8 buf[I2C_SMBUS_BLOCK_MAX];
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+ if (ret < 0)
+ return ret;
+ if (ret < 3 || strncmp(buf, "LTC", 3))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+ if (ret < 0)
+ return ret;
+ for (id = &ltc2978_id[0]; strlen(id->name); id++) {
+ if (!strncasecmp(id->name, buf, strlen(id->name)))
+ return (int)id->driver_data;
+ }
+ return -ENODEV;
+ }
+
+ chip_id &= LTC2978_ID_MASK;
+
+ if (chip_id == LTC2974_ID)
+ return ltc2974;
+ else if (chip_id == LTC2975_ID)
+ return ltc2975;
+ else if (chip_id == LTC2977_ID)
+ return ltc2977;
+ else if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2)
+ return ltc2978;
+ else if (chip_id == LTC2980_ID_A || chip_id == LTC2980_ID_B)
+ return ltc2980;
+ else if (chip_id == LTC3880_ID)
+ return ltc3880;
+ else if (chip_id == LTC3882_ID || chip_id == LTC3882_ID_D1)
+ return ltc3882;
+ else if (chip_id == LTC3883_ID)
+ return ltc3883;
+ else if (chip_id == LTC3886_ID)
+ return ltc3886;
+ else if (chip_id == LTC3887_ID)
+ return ltc3887;
+ else if (chip_id == LTM2987_ID_A || chip_id == LTM2987_ID_B)
+ return ltm2987;
+ else if (chip_id == LTM4675_ID)
+ return ltm4675;
+ else if (chip_id == LTM4676_ID_REV1 || chip_id == LTM4676_ID_REV2 ||
+ chip_id == LTM4676A_ID)
+ return ltm4676;
+
+ dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
+ return -ENODEV;
+}
+
+static int ltc2978_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int i, chip_id;
+ struct ltc2978_data *data;
+ struct pmbus_driver_info *info;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_WORD_DATA))
+ return -ENODEV;
+
+ data = devm_kzalloc(&client->dev, sizeof(struct ltc2978_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ chip_id = ltc2978_get_id(client);
+ if (chip_id < 0)
+ return chip_id;
+
+ data->id = chip_id;
+ if (data->id != id->driver_data)
+ dev_warn(&client->dev,
+ "Device mismatch: Configured %s, detected %s\n",
+ id->name,
+ ltc2978_id[data->id].name);
+
+ info = &data->info;
+ info->write_word_data = ltc2978_write_word_data;
+ info->write_byte = ltc_write_byte;
+ info->read_word_data = ltc_read_word_data;
+ info->read_byte_data = ltc_read_byte_data;
+
+ data->vin_min = 0x7bff;
+ data->vin_max = 0x7c00;
+ for (i = 0; i < ARRAY_SIZE(data->vout_min); i++)
+ data->vout_min[i] = 0xffff;
+ for (i = 0; i < ARRAY_SIZE(data->iout_min); i++)
+ data->iout_min[i] = 0xfbff;
+ for (i = 0; i < ARRAY_SIZE(data->iout_max); i++)
+ data->iout_max[i] = 0x7c00;
+ for (i = 0; i < ARRAY_SIZE(data->temp_min); i++)
+ data->temp_min[i] = 0x7bff;
+ for (i = 0; i < ARRAY_SIZE(data->temp_max); i++)
+ data->temp_max[i] = 0x7c00;
+ data->temp2_max = 0x7c00;
+
+ switch (data->id) {
+ case ltc2974:
+ info->read_word_data = ltc2974_read_word_data;
+ info->pages = LTC2974_NUM_PAGES;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_TEMP2;
+ for (i = 0; i < info->pages; i++) {
+ info->func[i] |= PMBUS_HAVE_VOUT
+ | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
+ }
+ break;
+ case ltc2975:
+ info->read_word_data = ltc2975_read_word_data;
+ info->pages = LTC2974_NUM_PAGES;
+ info->func[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN
+ | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_TEMP2;
+ for (i = 0; i < info->pages; i++) {
+ info->func[i] |= PMBUS_HAVE_VOUT
+ | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
+ }
+ break;
+ case ltc2977:
+ case ltc2978:
+ case ltc2980:
+ case ltm2987:
+ info->read_word_data = ltc2978_read_word_data;
+ info->pages = LTC2978_NUM_PAGES;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+ for (i = 1; i < LTC2978_NUM_PAGES; i++) {
+ info->func[i] = PMBUS_HAVE_VOUT
+ | PMBUS_HAVE_STATUS_VOUT;
+ }
+ break;
+ case ltc3880:
+ case ltc3887:
+ case ltm4675:
+ case ltm4676:
+ data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
+ info->read_word_data = ltc3880_read_word_data;
+ info->pages = LTC3880_NUM_PAGES;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+ | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+ | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+ info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_POUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+ break;
+ case ltc3882:
+ data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
+ info->read_word_data = ltc3880_read_word_data;
+ info->pages = LTC3880_NUM_PAGES;
+ info->func[0] = PMBUS_HAVE_VIN
+ | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+ | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+ info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_POUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+ break;
+ case ltc3883:
+ data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
+ info->read_word_data = ltc3883_read_word_data;
+ info->pages = LTC3883_NUM_PAGES;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+ | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+ | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+ break;
+ case ltc3886:
+ data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
+ info->read_word_data = ltc3883_read_word_data;
+ info->pages = LTC3880_NUM_PAGES;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+ | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+ | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+ info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_POUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+#if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
+ info->num_regulators = info->pages;
+ info->reg_desc = ltc2978_reg_desc;
+ if (info->num_regulators > ARRAY_SIZE(ltc2978_reg_desc)) {
+ dev_err(&client->dev, "num_regulators too large!");
+ info->num_regulators = ARRAY_SIZE(ltc2978_reg_desc);
+ }
+#endif
+
+ return pmbus_do_probe(client, id, info);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ltc2978_of_match[] = {
+ { .compatible = "lltc,ltc2974" },
+ { .compatible = "lltc,ltc2975" },
+ { .compatible = "lltc,ltc2977" },
+ { .compatible = "lltc,ltc2978" },
+ { .compatible = "lltc,ltc2980" },
+ { .compatible = "lltc,ltc3880" },
+ { .compatible = "lltc,ltc3882" },
+ { .compatible = "lltc,ltc3883" },
+ { .compatible = "lltc,ltc3886" },
+ { .compatible = "lltc,ltc3887" },
+ { .compatible = "lltc,ltm2987" },
+ { .compatible = "lltc,ltm4675" },
+ { .compatible = "lltc,ltm4676" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ltc2978_of_match);
+#endif
+
+static struct i2c_driver ltc2978_driver = {
+ .driver = {
+ .name = "ltc2978",
+ .of_match_table = of_match_ptr(ltc2978_of_match),
+ },
+ .probe = ltc2978_probe,
+ .remove = pmbus_do_remove,
+ .id_table = ltc2978_id,
+};
+
+module_i2c_driver(ltc2978_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for LTC2978 and comppatible chips");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/ltc3815.c b/drivers/hwmon/pmbus/ltc3815.c
new file mode 100644
index 000000000..bb32e6276
--- /dev/null
+++ b/drivers/hwmon/pmbus/ltc3815.c
@@ -0,0 +1,215 @@
+/*
+ * Hardware monitoring driver for LTC3815
+ *
+ * Copyright (c) 2015 Linear Technology
+ * Copyright (c) 2015 Guenter Roeck
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define LTC3815_MFR_IOUT_PEAK 0xd7
+#define LTC3815_MFR_VOUT_PEAK 0xdd
+#define LTC3815_MFR_VIN_PEAK 0xde
+#define LTC3815_MFR_TEMP_PEAK 0xdf
+#define LTC3815_MFR_IIN_PEAK 0xe1
+#define LTC3815_MFR_SPECIAL_ID 0xe7
+
+#define LTC3815_ID 0x8000
+#define LTC3815_ID_MASK 0xff00
+
+static int ltc3815_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VOUT_MODE:
+ /*
+ * The chip returns 0x3e, suggesting VID mode with manufacturer
+ * specific VID codes. Since the output voltage is reported
+ * with a LSB of 0.5mV, override and report direct mode with
+ * appropriate coefficients.
+ */
+ ret = 0x40;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int ltc3815_write_byte(struct i2c_client *client, int page, u8 reg)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_CLEAR_FAULTS:
+ /*
+ * LTC3815 does not support the CLEAR_FAULTS command.
+ * Emulate it by clearing the status register.
+ */
+ ret = pmbus_read_word_data(client, 0, PMBUS_STATUS_WORD);
+ if (ret > 0) {
+ pmbus_write_word_data(client, 0, PMBUS_STATUS_WORD,
+ ret);
+ ret = 0;
+ }
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int ltc3815_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VIN_MAX:
+ ret = pmbus_read_word_data(client, page, LTC3815_MFR_VIN_PEAK);
+ break;
+ case PMBUS_VIRT_READ_VOUT_MAX:
+ ret = pmbus_read_word_data(client, page, LTC3815_MFR_VOUT_PEAK);
+ break;
+ case PMBUS_VIRT_READ_TEMP_MAX:
+ ret = pmbus_read_word_data(client, page, LTC3815_MFR_TEMP_PEAK);
+ break;
+ case PMBUS_VIRT_READ_IOUT_MAX:
+ ret = pmbus_read_word_data(client, page, LTC3815_MFR_IOUT_PEAK);
+ break;
+ case PMBUS_VIRT_READ_IIN_MAX:
+ ret = pmbus_read_word_data(client, page, LTC3815_MFR_IIN_PEAK);
+ break;
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ case PMBUS_VIRT_RESET_VIN_HISTORY:
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ case PMBUS_VIRT_RESET_IIN_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int ltc3815_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_RESET_IIN_HISTORY:
+ ret = pmbus_write_word_data(client, page,
+ LTC3815_MFR_IIN_PEAK, 0);
+ break;
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ ret = pmbus_write_word_data(client, page,
+ LTC3815_MFR_IOUT_PEAK, 0);
+ break;
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ ret = pmbus_write_word_data(client, page,
+ LTC3815_MFR_VOUT_PEAK, 0);
+ break;
+ case PMBUS_VIRT_RESET_VIN_HISTORY:
+ ret = pmbus_write_word_data(client, page,
+ LTC3815_MFR_VIN_PEAK, 0);
+ break;
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ ret = pmbus_write_word_data(client, page,
+ LTC3815_MFR_TEMP_PEAK, 0);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static const struct i2c_device_id ltc3815_id[] = {
+ {"ltc3815", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ltc3815_id);
+
+static struct pmbus_driver_info ltc3815_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = direct,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_CURRENT_IN] = direct,
+ .format[PSC_CURRENT_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_VOLTAGE_IN] = 250,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = 0,
+ .m[PSC_VOLTAGE_OUT] = 2,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = 3,
+ .m[PSC_CURRENT_IN] = 1,
+ .b[PSC_CURRENT_IN] = 0,
+ .R[PSC_CURRENT_IN] = 2,
+ .m[PSC_CURRENT_OUT] = 1,
+ .b[PSC_CURRENT_OUT] = 0,
+ .R[PSC_CURRENT_OUT] = 2,
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 0,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP,
+ .read_byte_data = ltc3815_read_byte_data,
+ .read_word_data = ltc3815_read_word_data,
+ .write_byte = ltc3815_write_byte,
+ .write_word_data = ltc3815_write_word_data,
+};
+
+static int ltc3815_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int chip_id;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_WORD_DATA))
+ return -ENODEV;
+
+ chip_id = i2c_smbus_read_word_data(client, LTC3815_MFR_SPECIAL_ID);
+ if (chip_id < 0)
+ return chip_id;
+ if ((chip_id & LTC3815_ID_MASK) != LTC3815_ID)
+ return -ENODEV;
+
+ return pmbus_do_probe(client, id, &ltc3815_info);
+}
+
+static struct i2c_driver ltc3815_driver = {
+ .driver = {
+ .name = "ltc3815",
+ },
+ .probe = ltc3815_probe,
+ .remove = pmbus_do_remove,
+ .id_table = ltc3815_id,
+};
+
+module_i2c_driver(ltc3815_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for LTC3815");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/max16064.c b/drivers/hwmon/pmbus/max16064.c
new file mode 100644
index 000000000..fa237a3c3
--- /dev/null
+++ b/drivers/hwmon/pmbus/max16064.c
@@ -0,0 +1,127 @@
+/*
+ * Hardware monitoring driver for Maxim MAX16064
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+#define MAX16064_MFR_VOUT_PEAK 0xd4
+#define MAX16064_MFR_TEMPERATURE_PEAK 0xd6
+
+static int max16064_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VOUT_MAX:
+ ret = pmbus_read_word_data(client, page,
+ MAX16064_MFR_VOUT_PEAK);
+ break;
+ case PMBUS_VIRT_READ_TEMP_MAX:
+ ret = pmbus_read_word_data(client, page,
+ MAX16064_MFR_TEMPERATURE_PEAK);
+ break;
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int max16064_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ ret = pmbus_write_word_data(client, page,
+ MAX16064_MFR_VOUT_PEAK, 0);
+ break;
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ ret = pmbus_write_word_data(client, page,
+ MAX16064_MFR_TEMPERATURE_PEAK,
+ 0xffff);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static struct pmbus_driver_info max16064_info = {
+ .pages = 4,
+ .format[PSC_VOLTAGE_IN] = direct,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_VOLTAGE_IN] = 19995,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = -1,
+ .m[PSC_VOLTAGE_OUT] = 19995,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = -1,
+ .m[PSC_TEMPERATURE] = -7612,
+ .b[PSC_TEMPERATURE] = 335,
+ .R[PSC_TEMPERATURE] = -3,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_TEMP
+ | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_TEMP,
+ .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .read_word_data = max16064_read_word_data,
+ .write_word_data = max16064_write_word_data,
+};
+
+static int max16064_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ return pmbus_do_probe(client, id, &max16064_info);
+}
+
+static const struct i2c_device_id max16064_id[] = {
+ {"max16064", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, max16064_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver max16064_driver = {
+ .driver = {
+ .name = "max16064",
+ },
+ .probe = max16064_probe,
+ .remove = pmbus_do_remove,
+ .id_table = max16064_id,
+};
+
+module_i2c_driver(max16064_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX16064");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/max20751.c b/drivers/hwmon/pmbus/max20751.c
new file mode 100644
index 000000000..ab74aeae8
--- /dev/null
+++ b/drivers/hwmon/pmbus/max20751.c
@@ -0,0 +1,64 @@
+/*
+ * Hardware monitoring driver for Maxim MAX20751
+ *
+ * Copyright (c) 2015 Guenter Roeck
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info max20751_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = vid,
+ .vrm_version = vr12,
+ .format[PSC_TEMPERATURE] = linear,
+ .format[PSC_CURRENT_OUT] = linear,
+ .format[PSC_POWER] = linear,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_POUT,
+};
+
+static int max20751_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ return pmbus_do_probe(client, id, &max20751_info);
+}
+
+static const struct i2c_device_id max20751_id[] = {
+ {"max20751", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, max20751_id);
+
+static struct i2c_driver max20751_driver = {
+ .driver = {
+ .name = "max20751",
+ },
+ .probe = max20751_probe,
+ .remove = pmbus_do_remove,
+ .id_table = max20751_id,
+};
+
+module_i2c_driver(max20751_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX20751");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/max31785.c b/drivers/hwmon/pmbus/max31785.c
new file mode 100644
index 000000000..c9dc8799b
--- /dev/null
+++ b/drivers/hwmon/pmbus/max31785.c
@@ -0,0 +1,408 @@
+/*
+ * Copyright (C) 2017 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+enum max31785_regs {
+ MFR_REVISION = 0x9b,
+ MFR_FAN_CONFIG = 0xf1,
+};
+
+#define MAX31785 0x3030
+#define MAX31785A 0x3040
+
+#define MFR_FAN_CONFIG_DUAL_TACH BIT(12)
+
+#define MAX31785_NR_PAGES 23
+#define MAX31785_NR_FAN_PAGES 6
+
+static int max31785_read_byte_data(struct i2c_client *client, int page,
+ int reg)
+{
+ if (page < MAX31785_NR_PAGES)
+ return -ENODATA;
+
+ switch (reg) {
+ case PMBUS_VOUT_MODE:
+ return -ENOTSUPP;
+ case PMBUS_FAN_CONFIG_12:
+ return pmbus_read_byte_data(client, page - MAX31785_NR_PAGES,
+ reg);
+ }
+
+ return -ENODATA;
+}
+
+static int max31785_write_byte(struct i2c_client *client, int page, u8 value)
+{
+ if (page < MAX31785_NR_PAGES)
+ return -ENODATA;
+
+ return -ENOTSUPP;
+}
+
+static int max31785_read_long_data(struct i2c_client *client, int page,
+ int reg, u32 *data)
+{
+ unsigned char cmdbuf[1];
+ unsigned char rspbuf[4];
+ int rc;
+
+ struct i2c_msg msg[2] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = sizeof(cmdbuf),
+ .buf = cmdbuf,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = sizeof(rspbuf),
+ .buf = rspbuf,
+ },
+ };
+
+ cmdbuf[0] = reg;
+
+ rc = pmbus_set_page(client, page);
+ if (rc < 0)
+ return rc;
+
+ rc = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+ if (rc < 0)
+ return rc;
+
+ *data = (rspbuf[0] << (0 * 8)) | (rspbuf[1] << (1 * 8)) |
+ (rspbuf[2] << (2 * 8)) | (rspbuf[3] << (3 * 8));
+
+ return rc;
+}
+
+static int max31785_get_pwm(struct i2c_client *client, int page)
+{
+ int rv;
+
+ rv = pmbus_get_fan_rate_device(client, page, 0, percent);
+ if (rv < 0)
+ return rv;
+ else if (rv >= 0x8000)
+ return 0;
+ else if (rv >= 0x2711)
+ return 0x2710;
+
+ return rv;
+}
+
+static int max31785_get_pwm_mode(struct i2c_client *client, int page)
+{
+ int config;
+ int command;
+
+ config = pmbus_read_byte_data(client, page, PMBUS_FAN_CONFIG_12);
+ if (config < 0)
+ return config;
+
+ command = pmbus_read_word_data(client, page, PMBUS_FAN_COMMAND_1);
+ if (command < 0)
+ return command;
+
+ if (config & PB_FAN_1_RPM)
+ return (command >= 0x8000) ? 3 : 2;
+
+ if (command >= 0x8000)
+ return 3;
+ else if (command >= 0x2711)
+ return 0;
+
+ return 1;
+}
+
+static int max31785_read_word_data(struct i2c_client *client, int page,
+ int reg)
+{
+ u32 val;
+ int rv;
+
+ switch (reg) {
+ case PMBUS_READ_FAN_SPEED_1:
+ if (page < MAX31785_NR_PAGES)
+ return -ENODATA;
+
+ rv = max31785_read_long_data(client, page - MAX31785_NR_PAGES,
+ reg, &val);
+ if (rv < 0)
+ return rv;
+
+ rv = (val >> 16) & 0xffff;
+ break;
+ case PMBUS_FAN_COMMAND_1:
+ /*
+ * PMBUS_FAN_COMMAND_x is probed to judge whether or not to
+ * expose fan control registers.
+ *
+ * Don't expose fan_target attribute for virtual pages.
+ */
+ rv = (page >= MAX31785_NR_PAGES) ? -ENOTSUPP : -ENODATA;
+ break;
+ case PMBUS_VIRT_PWM_1:
+ rv = max31785_get_pwm(client, page);
+ break;
+ case PMBUS_VIRT_PWM_ENABLE_1:
+ rv = max31785_get_pwm_mode(client, page);
+ break;
+ default:
+ rv = -ENODATA;
+ break;
+ }
+
+ return rv;
+}
+
+static inline u32 max31785_scale_pwm(u32 sensor_val)
+{
+ /*
+ * The datasheet describes the accepted value range for manual PWM as
+ * [0, 0x2710], while the hwmon pwmX sysfs interface accepts values in
+ * [0, 255]. The MAX31785 uses DIRECT mode to scale the FAN_COMMAND
+ * registers and in PWM mode the coefficients are m=1, b=0, R=2. The
+ * important observation here is that 0x2710 == 10000 == 100 * 100.
+ *
+ * R=2 (== 10^2 == 100) accounts for scaling the value provided at the
+ * sysfs interface into the required hardware resolution, but it does
+ * not yet yield a value that we can write to the device (this initial
+ * scaling is handled by pmbus_data2reg()). Multiplying by 100 below
+ * translates the parameter value into the percentage units required by
+ * PMBus, and then we scale back by 255 as required by the hwmon pwmX
+ * interface to yield the percentage value at the appropriate
+ * resolution for hardware.
+ */
+ return (sensor_val * 100) / 255;
+}
+
+static int max31785_pwm_enable(struct i2c_client *client, int page,
+ u16 word)
+{
+ int config = 0;
+ int rate;
+
+ switch (word) {
+ case 0:
+ rate = 0x7fff;
+ break;
+ case 1:
+ rate = pmbus_get_fan_rate_cached(client, page, 0, percent);
+ if (rate < 0)
+ return rate;
+ rate = max31785_scale_pwm(rate);
+ break;
+ case 2:
+ config = PB_FAN_1_RPM;
+ rate = pmbus_get_fan_rate_cached(client, page, 0, rpm);
+ if (rate < 0)
+ return rate;
+ break;
+ case 3:
+ rate = 0xffff;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return pmbus_update_fan(client, page, 0, config, PB_FAN_1_RPM, rate);
+}
+
+static int max31785_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ switch (reg) {
+ case PMBUS_VIRT_PWM_1:
+ return pmbus_update_fan(client, page, 0, 0, PB_FAN_1_RPM,
+ max31785_scale_pwm(word));
+ case PMBUS_VIRT_PWM_ENABLE_1:
+ return max31785_pwm_enable(client, page, word);
+ default:
+ break;
+ }
+
+ return -ENODATA;
+}
+
+#define MAX31785_FAN_FUNCS \
+ (PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 | PMBUS_HAVE_PWM12)
+
+#define MAX31785_TEMP_FUNCS \
+ (PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP)
+
+#define MAX31785_VOUT_FUNCS \
+ (PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT)
+
+#define MAX37185_NUM_FAN_PAGES 6
+
+static const struct pmbus_driver_info max31785_info = {
+ .pages = MAX31785_NR_PAGES,
+
+ .write_word_data = max31785_write_word_data,
+ .read_byte_data = max31785_read_byte_data,
+ .read_word_data = max31785_read_word_data,
+ .write_byte = max31785_write_byte,
+
+ /* RPM */
+ .format[PSC_FAN] = direct,
+ .m[PSC_FAN] = 1,
+ .b[PSC_FAN] = 0,
+ .R[PSC_FAN] = 0,
+ /* PWM */
+ .format[PSC_PWM] = direct,
+ .m[PSC_PWM] = 1,
+ .b[PSC_PWM] = 0,
+ .R[PSC_PWM] = 2,
+ .func[0] = MAX31785_FAN_FUNCS,
+ .func[1] = MAX31785_FAN_FUNCS,
+ .func[2] = MAX31785_FAN_FUNCS,
+ .func[3] = MAX31785_FAN_FUNCS,
+ .func[4] = MAX31785_FAN_FUNCS,
+ .func[5] = MAX31785_FAN_FUNCS,
+
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 2,
+ .func[6] = MAX31785_TEMP_FUNCS,
+ .func[7] = MAX31785_TEMP_FUNCS,
+ .func[8] = MAX31785_TEMP_FUNCS,
+ .func[9] = MAX31785_TEMP_FUNCS,
+ .func[10] = MAX31785_TEMP_FUNCS,
+ .func[11] = MAX31785_TEMP_FUNCS,
+ .func[12] = MAX31785_TEMP_FUNCS,
+ .func[13] = MAX31785_TEMP_FUNCS,
+ .func[14] = MAX31785_TEMP_FUNCS,
+ .func[15] = MAX31785_TEMP_FUNCS,
+ .func[16] = MAX31785_TEMP_FUNCS,
+
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .m[PSC_VOLTAGE_OUT] = 1,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = 0,
+ .func[17] = MAX31785_VOUT_FUNCS,
+ .func[18] = MAX31785_VOUT_FUNCS,
+ .func[19] = MAX31785_VOUT_FUNCS,
+ .func[20] = MAX31785_VOUT_FUNCS,
+ .func[21] = MAX31785_VOUT_FUNCS,
+ .func[22] = MAX31785_VOUT_FUNCS,
+};
+
+static int max31785_configure_dual_tach(struct i2c_client *client,
+ struct pmbus_driver_info *info)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < MAX31785_NR_FAN_PAGES; i++) {
+ ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_read_word_data(client, MFR_FAN_CONFIG);
+ if (ret < 0)
+ return ret;
+
+ if (ret & MFR_FAN_CONFIG_DUAL_TACH) {
+ int virtual = MAX31785_NR_PAGES + i;
+
+ info->pages = virtual + 1;
+ info->func[virtual] |= PMBUS_HAVE_FAN12;
+ info->func[virtual] |= PMBUS_PAGE_VIRTUAL;
+ }
+ }
+
+ return 0;
+}
+
+static int max31785_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct pmbus_driver_info *info;
+ bool dual_tach = false;
+ s64 ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
+ info = devm_kzalloc(dev, sizeof(struct pmbus_driver_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ *info = max31785_info;
+
+ ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 255);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_read_word_data(client, MFR_REVISION);
+ if (ret < 0)
+ return ret;
+
+ if (ret == MAX31785A) {
+ dual_tach = true;
+ } else if (ret == MAX31785) {
+ if (!strcmp("max31785a", id->name))
+ dev_warn(dev, "Expected max3175a, found max31785: cannot provide secondary tachometer readings\n");
+ } else {
+ return -ENODEV;
+ }
+
+ if (dual_tach) {
+ ret = max31785_configure_dual_tach(client, info);
+ if (ret < 0)
+ return ret;
+ }
+
+ return pmbus_do_probe(client, id, info);
+}
+
+static const struct i2c_device_id max31785_id[] = {
+ { "max31785", 0 },
+ { "max31785a", 0 },
+ { },
+};
+
+MODULE_DEVICE_TABLE(i2c, max31785_id);
+
+static const struct of_device_id max31785_of_match[] = {
+ { .compatible = "maxim,max31785" },
+ { .compatible = "maxim,max31785a" },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, max31785_of_match);
+
+static struct i2c_driver max31785_driver = {
+ .driver = {
+ .name = "max31785",
+ .of_match_table = max31785_of_match,
+ },
+ .probe = max31785_probe,
+ .remove = pmbus_do_remove,
+ .id_table = max31785_id,
+};
+
+module_i2c_driver(max31785_driver);
+
+MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
+MODULE_DESCRIPTION("PMBus driver for the Maxim MAX31785");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
new file mode 100644
index 000000000..9af5ab52c
--- /dev/null
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -0,0 +1,520 @@
+/*
+ * Hardware monitoring driver for Maxim MAX34440/MAX34441
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+enum chips { max34440, max34441, max34446, max34451, max34460, max34461 };
+
+#define MAX34440_MFR_VOUT_PEAK 0xd4
+#define MAX34440_MFR_IOUT_PEAK 0xd5
+#define MAX34440_MFR_TEMPERATURE_PEAK 0xd6
+#define MAX34440_MFR_VOUT_MIN 0xd7
+
+#define MAX34446_MFR_POUT_PEAK 0xe0
+#define MAX34446_MFR_POUT_AVG 0xe1
+#define MAX34446_MFR_IOUT_AVG 0xe2
+#define MAX34446_MFR_TEMPERATURE_AVG 0xe3
+
+#define MAX34440_STATUS_OC_WARN BIT(0)
+#define MAX34440_STATUS_OC_FAULT BIT(1)
+#define MAX34440_STATUS_OT_FAULT BIT(5)
+#define MAX34440_STATUS_OT_WARN BIT(6)
+
+#define MAX34451_MFR_CHANNEL_CONFIG 0xe4
+#define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK 0x3f
+
+struct max34440_data {
+ int id;
+ struct pmbus_driver_info info;
+};
+
+#define to_max34440_data(x) container_of(x, struct max34440_data, info)
+
+static int max34440_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ int ret;
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct max34440_data *data = to_max34440_data(info);
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VOUT_MIN:
+ ret = pmbus_read_word_data(client, page,
+ MAX34440_MFR_VOUT_MIN);
+ break;
+ case PMBUS_VIRT_READ_VOUT_MAX:
+ ret = pmbus_read_word_data(client, page,
+ MAX34440_MFR_VOUT_PEAK);
+ break;
+ case PMBUS_VIRT_READ_IOUT_AVG:
+ if (data->id != max34446 && data->id != max34451)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, page,
+ MAX34446_MFR_IOUT_AVG);
+ break;
+ case PMBUS_VIRT_READ_IOUT_MAX:
+ ret = pmbus_read_word_data(client, page,
+ MAX34440_MFR_IOUT_PEAK);
+ break;
+ case PMBUS_VIRT_READ_POUT_AVG:
+ if (data->id != max34446)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, page,
+ MAX34446_MFR_POUT_AVG);
+ break;
+ case PMBUS_VIRT_READ_POUT_MAX:
+ if (data->id != max34446)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, page,
+ MAX34446_MFR_POUT_PEAK);
+ break;
+ case PMBUS_VIRT_READ_TEMP_AVG:
+ if (data->id != max34446 && data->id != max34460 &&
+ data->id != max34461)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, page,
+ MAX34446_MFR_TEMPERATURE_AVG);
+ break;
+ case PMBUS_VIRT_READ_TEMP_MAX:
+ ret = pmbus_read_word_data(client, page,
+ MAX34440_MFR_TEMPERATURE_PEAK);
+ break;
+ case PMBUS_VIRT_RESET_POUT_HISTORY:
+ if (data->id != max34446)
+ return -ENXIO;
+ ret = 0;
+ break;
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int max34440_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct max34440_data *data = to_max34440_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_RESET_POUT_HISTORY:
+ ret = pmbus_write_word_data(client, page,
+ MAX34446_MFR_POUT_PEAK, 0);
+ if (ret)
+ break;
+ ret = pmbus_write_word_data(client, page,
+ MAX34446_MFR_POUT_AVG, 0);
+ break;
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ ret = pmbus_write_word_data(client, page,
+ MAX34440_MFR_VOUT_MIN, 0x7fff);
+ if (ret)
+ break;
+ ret = pmbus_write_word_data(client, page,
+ MAX34440_MFR_VOUT_PEAK, 0);
+ break;
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ ret = pmbus_write_word_data(client, page,
+ MAX34440_MFR_IOUT_PEAK, 0);
+ if (!ret && (data->id == max34446 || data->id == max34451))
+ ret = pmbus_write_word_data(client, page,
+ MAX34446_MFR_IOUT_AVG, 0);
+
+ break;
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ ret = pmbus_write_word_data(client, page,
+ MAX34440_MFR_TEMPERATURE_PEAK,
+ 0x8000);
+ if (!ret && data->id == max34446)
+ ret = pmbus_write_word_data(client, page,
+ MAX34446_MFR_TEMPERATURE_AVG, 0);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int max34440_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ int ret = 0;
+ int mfg_status;
+
+ if (page >= 0) {
+ ret = pmbus_set_page(client, page);
+ if (ret < 0)
+ return ret;
+ }
+
+ switch (reg) {
+ case PMBUS_STATUS_IOUT:
+ mfg_status = pmbus_read_word_data(client, 0,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (mfg_status < 0)
+ return mfg_status;
+ if (mfg_status & MAX34440_STATUS_OC_WARN)
+ ret |= PB_IOUT_OC_WARNING;
+ if (mfg_status & MAX34440_STATUS_OC_FAULT)
+ ret |= PB_IOUT_OC_FAULT;
+ break;
+ case PMBUS_STATUS_TEMPERATURE:
+ mfg_status = pmbus_read_word_data(client, 0,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (mfg_status < 0)
+ return mfg_status;
+ if (mfg_status & MAX34440_STATUS_OT_WARN)
+ ret |= PB_TEMP_OT_WARNING;
+ if (mfg_status & MAX34440_STATUS_OT_FAULT)
+ ret |= PB_TEMP_OT_FAULT;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int max34451_set_supported_funcs(struct i2c_client *client,
+ struct max34440_data *data)
+{
+ /*
+ * Each of the channel 0-15 can be configured to monitor the following
+ * functions based on MFR_CHANNEL_CONFIG[5:0]
+ * 0x10: Sequencing + voltage monitoring (only valid for PAGES 0–11)
+ * 0x20: Voltage monitoring (no sequencing)
+ * 0x21: Voltage read only
+ * 0x22: Current monitoring
+ * 0x23: Current read only
+ * 0x30: General-purpose input active low
+ * 0x34: General-purpose input active high
+ * 0x00: Disabled
+ */
+
+ int page, rv;
+
+ for (page = 0; page < 16; page++) {
+ rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
+ if (rv < 0)
+ return rv;
+
+ rv = i2c_smbus_read_word_data(client,
+ MAX34451_MFR_CHANNEL_CONFIG);
+ if (rv < 0)
+ return rv;
+
+ switch (rv & MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK) {
+ case 0x10:
+ case 0x20:
+ data->info.func[page] = PMBUS_HAVE_VOUT |
+ PMBUS_HAVE_STATUS_VOUT;
+ break;
+ case 0x21:
+ data->info.func[page] = PMBUS_HAVE_VOUT;
+ break;
+ case 0x22:
+ data->info.func[page] = PMBUS_HAVE_IOUT |
+ PMBUS_HAVE_STATUS_IOUT;
+ break;
+ case 0x23:
+ data->info.func[page] = PMBUS_HAVE_IOUT;
+ break;
+ default:
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static struct pmbus_driver_info max34440_info[] = {
+ [max34440] = {
+ .pages = 14,
+ .format[PSC_VOLTAGE_IN] = direct,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .format[PSC_CURRENT_OUT] = direct,
+ .m[PSC_VOLTAGE_IN] = 1,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = 3, /* R = 0 in datasheet reflects mV */
+ .m[PSC_VOLTAGE_OUT] = 1,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = 3, /* R = 0 in datasheet reflects mV */
+ .m[PSC_CURRENT_OUT] = 1,
+ .b[PSC_CURRENT_OUT] = 0,
+ .R[PSC_CURRENT_OUT] = 3, /* R = 0 in datasheet reflects mA */
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 2,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[12] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[13] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .read_byte_data = max34440_read_byte_data,
+ .read_word_data = max34440_read_word_data,
+ .write_word_data = max34440_write_word_data,
+ },
+ [max34441] = {
+ .pages = 12,
+ .format[PSC_VOLTAGE_IN] = direct,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .format[PSC_CURRENT_OUT] = direct,
+ .format[PSC_FAN] = direct,
+ .m[PSC_VOLTAGE_IN] = 1,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = 3,
+ .m[PSC_VOLTAGE_OUT] = 1,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = 3,
+ .m[PSC_CURRENT_OUT] = 1,
+ .b[PSC_CURRENT_OUT] = 0,
+ .R[PSC_CURRENT_OUT] = 3,
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 2,
+ .m[PSC_FAN] = 1,
+ .b[PSC_FAN] = 0,
+ .R[PSC_FAN] = 0,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[5] = PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12,
+ .func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .read_byte_data = max34440_read_byte_data,
+ .read_word_data = max34440_read_word_data,
+ .write_word_data = max34440_write_word_data,
+ },
+ [max34446] = {
+ .pages = 7,
+ .format[PSC_VOLTAGE_IN] = direct,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .format[PSC_CURRENT_OUT] = direct,
+ .format[PSC_POWER] = direct,
+ .m[PSC_VOLTAGE_IN] = 1,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = 3,
+ .m[PSC_VOLTAGE_OUT] = 1,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = 3,
+ .m[PSC_CURRENT_OUT] = 1,
+ .b[PSC_CURRENT_OUT] = 0,
+ .R[PSC_CURRENT_OUT] = 3,
+ .m[PSC_POWER] = 1,
+ .b[PSC_POWER] = 0,
+ .R[PSC_POWER] = 3,
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 2,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
+ .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
+ .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[4] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[5] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .read_byte_data = max34440_read_byte_data,
+ .read_word_data = max34440_read_word_data,
+ .write_word_data = max34440_write_word_data,
+ },
+ [max34451] = {
+ .pages = 21,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .format[PSC_CURRENT_OUT] = direct,
+ .m[PSC_VOLTAGE_OUT] = 1,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = 3,
+ .m[PSC_CURRENT_OUT] = 1,
+ .b[PSC_CURRENT_OUT] = 0,
+ .R[PSC_CURRENT_OUT] = 2,
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 2,
+ /* func 0-15 is set dynamically before probing */
+ .func[16] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[19] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[20] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .read_word_data = max34440_read_word_data,
+ .write_word_data = max34440_write_word_data,
+ },
+ [max34460] = {
+ .pages = 18,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_VOLTAGE_OUT] = 1,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = 3,
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 2,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[6] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[7] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[8] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[9] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[10] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[11] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[13] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[14] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[15] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[16] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .read_word_data = max34440_read_word_data,
+ .write_word_data = max34440_write_word_data,
+ },
+ [max34461] = {
+ .pages = 23,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_VOLTAGE_OUT] = 1,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = 3,
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 2,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[6] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[7] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[8] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[9] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[10] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[11] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[12] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[13] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[14] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[15] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ /* page 16 is reserved */
+ .func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[19] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[20] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[21] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .read_word_data = max34440_read_word_data,
+ .write_word_data = max34440_write_word_data,
+ },
+};
+
+static int max34440_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct max34440_data *data;
+ int rv;
+
+ data = devm_kzalloc(&client->dev, sizeof(struct max34440_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ data->id = id->driver_data;
+ data->info = max34440_info[id->driver_data];
+
+ if (data->id == max34451) {
+ rv = max34451_set_supported_funcs(client, data);
+ if (rv)
+ return rv;
+ }
+
+ return pmbus_do_probe(client, id, &data->info);
+}
+
+static const struct i2c_device_id max34440_id[] = {
+ {"max34440", max34440},
+ {"max34441", max34441},
+ {"max34446", max34446},
+ {"max34451", max34451},
+ {"max34460", max34460},
+ {"max34461", max34461},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, max34440_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver max34440_driver = {
+ .driver = {
+ .name = "max34440",
+ },
+ .probe = max34440_probe,
+ .remove = pmbus_do_remove,
+ .id_table = max34440_id,
+};
+
+module_i2c_driver(max34440_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX34440/MAX34441");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/max8688.c b/drivers/hwmon/pmbus/max8688.c
new file mode 100644
index 000000000..e951f9b87
--- /dev/null
+++ b/drivers/hwmon/pmbus/max8688.c
@@ -0,0 +1,205 @@
+/*
+ * Hardware monitoring driver for Maxim MAX8688
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+#define MAX8688_MFR_VOUT_PEAK 0xd4
+#define MAX8688_MFR_IOUT_PEAK 0xd5
+#define MAX8688_MFR_TEMPERATURE_PEAK 0xd6
+#define MAX8688_MFG_STATUS 0xd8
+
+#define MAX8688_STATUS_OC_FAULT BIT(4)
+#define MAX8688_STATUS_OV_FAULT BIT(5)
+#define MAX8688_STATUS_OV_WARNING BIT(8)
+#define MAX8688_STATUS_UV_FAULT BIT(9)
+#define MAX8688_STATUS_UV_WARNING BIT(10)
+#define MAX8688_STATUS_UC_FAULT BIT(11)
+#define MAX8688_STATUS_OC_WARNING BIT(12)
+#define MAX8688_STATUS_OT_FAULT BIT(13)
+#define MAX8688_STATUS_OT_WARNING BIT(14)
+
+static int max8688_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ int ret;
+
+ if (page > 0)
+ return -ENXIO;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VOUT_MAX:
+ ret = pmbus_read_word_data(client, 0, MAX8688_MFR_VOUT_PEAK);
+ break;
+ case PMBUS_VIRT_READ_IOUT_MAX:
+ ret = pmbus_read_word_data(client, 0, MAX8688_MFR_IOUT_PEAK);
+ break;
+ case PMBUS_VIRT_READ_TEMP_MAX:
+ ret = pmbus_read_word_data(client, 0,
+ MAX8688_MFR_TEMPERATURE_PEAK);
+ break;
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int max8688_write_word_data(struct i2c_client *client, int page, int reg,
+ u16 word)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ ret = pmbus_write_word_data(client, 0, MAX8688_MFR_VOUT_PEAK,
+ 0);
+ break;
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ ret = pmbus_write_word_data(client, 0, MAX8688_MFR_IOUT_PEAK,
+ 0);
+ break;
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ ret = pmbus_write_word_data(client, 0,
+ MAX8688_MFR_TEMPERATURE_PEAK,
+ 0xffff);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int max8688_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ int ret = 0;
+ int mfg_status;
+
+ if (page > 0)
+ return -ENXIO;
+
+ switch (reg) {
+ case PMBUS_STATUS_VOUT:
+ mfg_status = pmbus_read_word_data(client, 0,
+ MAX8688_MFG_STATUS);
+ if (mfg_status < 0)
+ return mfg_status;
+ if (mfg_status & MAX8688_STATUS_UV_WARNING)
+ ret |= PB_VOLTAGE_UV_WARNING;
+ if (mfg_status & MAX8688_STATUS_UV_FAULT)
+ ret |= PB_VOLTAGE_UV_FAULT;
+ if (mfg_status & MAX8688_STATUS_OV_WARNING)
+ ret |= PB_VOLTAGE_OV_WARNING;
+ if (mfg_status & MAX8688_STATUS_OV_FAULT)
+ ret |= PB_VOLTAGE_OV_FAULT;
+ break;
+ case PMBUS_STATUS_IOUT:
+ mfg_status = pmbus_read_word_data(client, 0,
+ MAX8688_MFG_STATUS);
+ if (mfg_status < 0)
+ return mfg_status;
+ if (mfg_status & MAX8688_STATUS_UC_FAULT)
+ ret |= PB_IOUT_UC_FAULT;
+ if (mfg_status & MAX8688_STATUS_OC_WARNING)
+ ret |= PB_IOUT_OC_WARNING;
+ if (mfg_status & MAX8688_STATUS_OC_FAULT)
+ ret |= PB_IOUT_OC_FAULT;
+ break;
+ case PMBUS_STATUS_TEMPERATURE:
+ mfg_status = pmbus_read_word_data(client, 0,
+ MAX8688_MFG_STATUS);
+ if (mfg_status < 0)
+ return mfg_status;
+ if (mfg_status & MAX8688_STATUS_OT_WARNING)
+ ret |= PB_TEMP_OT_WARNING;
+ if (mfg_status & MAX8688_STATUS_OT_FAULT)
+ ret |= PB_TEMP_OT_FAULT;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static struct pmbus_driver_info max8688_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = direct,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .format[PSC_CURRENT_OUT] = direct,
+ .m[PSC_VOLTAGE_IN] = 19995,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = -1,
+ .m[PSC_VOLTAGE_OUT] = 19995,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = -1,
+ .m[PSC_CURRENT_OUT] = 23109,
+ .b[PSC_CURRENT_OUT] = 0,
+ .R[PSC_CURRENT_OUT] = -2,
+ .m[PSC_TEMPERATURE] = -7612,
+ .b[PSC_TEMPERATURE] = 335,
+ .R[PSC_TEMPERATURE] = -3,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP
+ | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_STATUS_TEMP,
+ .read_byte_data = max8688_read_byte_data,
+ .read_word_data = max8688_read_word_data,
+ .write_word_data = max8688_write_word_data,
+};
+
+static int max8688_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ return pmbus_do_probe(client, id, &max8688_info);
+}
+
+static const struct i2c_device_id max8688_id[] = {
+ {"max8688", 0},
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, max8688_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver max8688_driver = {
+ .driver = {
+ .name = "max8688",
+ },
+ .probe = max8688_probe,
+ .remove = pmbus_do_remove,
+ .id_table = max8688_id,
+};
+
+module_i2c_driver(max8688_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX8688");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c
new file mode 100644
index 000000000..7688dab32
--- /dev/null
+++ b/drivers/hwmon/pmbus/pmbus.c
@@ -0,0 +1,239 @@
+/*
+ * Hardware monitoring driver for PMBus devices
+ *
+ * Copyright (c) 2010, 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+/*
+ * Find sensor groups and status registers on each page.
+ */
+static void pmbus_find_sensor_groups(struct i2c_client *client,
+ struct pmbus_driver_info *info)
+{
+ int page;
+
+ /* Sensors detected on page 0 only */
+ if (pmbus_check_word_register(client, 0, PMBUS_READ_VIN))
+ info->func[0] |= PMBUS_HAVE_VIN;
+ if (pmbus_check_word_register(client, 0, PMBUS_READ_VCAP))
+ info->func[0] |= PMBUS_HAVE_VCAP;
+ if (pmbus_check_word_register(client, 0, PMBUS_READ_IIN))
+ info->func[0] |= PMBUS_HAVE_IIN;
+ if (pmbus_check_word_register(client, 0, PMBUS_READ_PIN))
+ info->func[0] |= PMBUS_HAVE_PIN;
+ if (info->func[0]
+ && pmbus_check_byte_register(client, 0, PMBUS_STATUS_INPUT))
+ info->func[0] |= PMBUS_HAVE_STATUS_INPUT;
+ if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_12) &&
+ pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) {
+ info->func[0] |= PMBUS_HAVE_FAN12;
+ if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_12))
+ info->func[0] |= PMBUS_HAVE_STATUS_FAN12;
+ }
+ if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_34) &&
+ pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) {
+ info->func[0] |= PMBUS_HAVE_FAN34;
+ if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34))
+ info->func[0] |= PMBUS_HAVE_STATUS_FAN34;
+ }
+ if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1))
+ info->func[0] |= PMBUS_HAVE_TEMP;
+ if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2))
+ info->func[0] |= PMBUS_HAVE_TEMP2;
+ if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3))
+ info->func[0] |= PMBUS_HAVE_TEMP3;
+ if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2
+ | PMBUS_HAVE_TEMP3)
+ && pmbus_check_byte_register(client, 0,
+ PMBUS_STATUS_TEMPERATURE))
+ info->func[0] |= PMBUS_HAVE_STATUS_TEMP;
+
+ /* Sensors detected on all pages */
+ for (page = 0; page < info->pages; page++) {
+ if (pmbus_check_word_register(client, page, PMBUS_READ_VOUT)) {
+ info->func[page] |= PMBUS_HAVE_VOUT;
+ if (pmbus_check_byte_register(client, page,
+ PMBUS_STATUS_VOUT))
+ info->func[page] |= PMBUS_HAVE_STATUS_VOUT;
+ }
+ if (pmbus_check_word_register(client, page, PMBUS_READ_IOUT)) {
+ info->func[page] |= PMBUS_HAVE_IOUT;
+ if (pmbus_check_byte_register(client, 0,
+ PMBUS_STATUS_IOUT))
+ info->func[page] |= PMBUS_HAVE_STATUS_IOUT;
+ }
+ if (pmbus_check_word_register(client, page, PMBUS_READ_POUT))
+ info->func[page] |= PMBUS_HAVE_POUT;
+ }
+}
+
+/*
+ * Identify chip parameters.
+ */
+static int pmbus_identify(struct i2c_client *client,
+ struct pmbus_driver_info *info)
+{
+ int ret = 0;
+
+ if (!info->pages) {
+ /*
+ * Check if the PAGE command is supported. If it is,
+ * keep setting the page number until it fails or until the
+ * maximum number of pages has been reached. Assume that
+ * this is the number of pages supported by the chip.
+ */
+ if (pmbus_check_byte_register(client, 0, PMBUS_PAGE)) {
+ int page;
+
+ for (page = 1; page < PMBUS_PAGES; page++) {
+ if (pmbus_set_page(client, page) < 0)
+ break;
+ }
+ pmbus_set_page(client, 0);
+ info->pages = page;
+ } else {
+ info->pages = 1;
+ }
+
+ pmbus_clear_faults(client);
+ }
+
+ if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) {
+ int vout_mode;
+
+ vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+ if (vout_mode >= 0 && vout_mode != 0xff) {
+ switch (vout_mode >> 5) {
+ case 0:
+ break;
+ case 1:
+ info->format[PSC_VOLTAGE_OUT] = vid;
+ info->vrm_version = vr11;
+ break;
+ case 2:
+ info->format[PSC_VOLTAGE_OUT] = direct;
+ break;
+ default:
+ ret = -ENODEV;
+ goto abort;
+ }
+ }
+ }
+
+ /*
+ * We should check if the COEFFICIENTS register is supported.
+ * If it is, and the chip is configured for direct mode, we can read
+ * the coefficients from the chip, one set per group of sensor
+ * registers.
+ *
+ * To do this, we will need access to a chip which actually supports the
+ * COEFFICIENTS command, since the command is too complex to implement
+ * without testing it. Until then, abort if a chip configured for direct
+ * mode was detected.
+ */
+ if (info->format[PSC_VOLTAGE_OUT] == direct) {
+ ret = -ENODEV;
+ goto abort;
+ }
+
+ /* Try to find sensor groups */
+ pmbus_find_sensor_groups(client, info);
+abort:
+ return ret;
+}
+
+static int pmbus_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pmbus_driver_info *info;
+ struct pmbus_platform_data *pdata = NULL;
+ struct device *dev = &client->dev;
+
+ info = devm_kzalloc(dev, sizeof(struct pmbus_driver_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ if (!strcmp(id->name, "dps460") || !strcmp(id->name, "dps800") ||
+ !strcmp(id->name, "sgd009")) {
+ pdata = devm_kzalloc(dev, sizeof(struct pmbus_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->flags = PMBUS_SKIP_STATUS_CHECK;
+ }
+
+ info->pages = id->driver_data;
+ info->identify = pmbus_identify;
+ dev->platform_data = pdata;
+
+ return pmbus_do_probe(client, id, info);
+}
+
+/*
+ * Use driver_data to set the number of pages supported by the chip.
+ */
+static const struct i2c_device_id pmbus_id[] = {
+ {"adp4000", 1},
+ {"bmr453", 1},
+ {"bmr454", 1},
+ {"dps460", 1},
+ {"dps800", 1},
+ {"mdt040", 1},
+ {"ncp4200", 1},
+ {"ncp4208", 1},
+ {"pdt003", 1},
+ {"pdt006", 1},
+ {"pdt012", 1},
+ {"pmbus", 0},
+ {"sgd009", 1},
+ {"tps40400", 1},
+ {"tps544b20", 1},
+ {"tps544b25", 1},
+ {"tps544c20", 1},
+ {"tps544c25", 1},
+ {"udt020", 1},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, pmbus_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver pmbus_driver = {
+ .driver = {
+ .name = "pmbus",
+ },
+ .probe = pmbus_probe,
+ .remove = pmbus_do_remove,
+ .id_table = pmbus_id,
+};
+
+module_i2c_driver(pmbus_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("Generic PMBus driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
new file mode 100644
index 000000000..9d731de85
--- /dev/null
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -0,0 +1,467 @@
+/*
+ * pmbus.h - Common defines and structures for PMBus devices
+ *
+ * Copyright (c) 2010, 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef PMBUS_H
+#define PMBUS_H
+
+#include <linux/bitops.h>
+#include <linux/regulator/driver.h>
+
+/*
+ * Registers
+ */
+enum pmbus_regs {
+ PMBUS_PAGE = 0x00,
+ PMBUS_OPERATION = 0x01,
+ PMBUS_ON_OFF_CONFIG = 0x02,
+ PMBUS_CLEAR_FAULTS = 0x03,
+ PMBUS_PHASE = 0x04,
+
+ PMBUS_CAPABILITY = 0x19,
+ PMBUS_QUERY = 0x1A,
+
+ PMBUS_VOUT_MODE = 0x20,
+ PMBUS_VOUT_COMMAND = 0x21,
+ PMBUS_VOUT_TRIM = 0x22,
+ PMBUS_VOUT_CAL_OFFSET = 0x23,
+ PMBUS_VOUT_MAX = 0x24,
+ PMBUS_VOUT_MARGIN_HIGH = 0x25,
+ PMBUS_VOUT_MARGIN_LOW = 0x26,
+ PMBUS_VOUT_TRANSITION_RATE = 0x27,
+ PMBUS_VOUT_DROOP = 0x28,
+ PMBUS_VOUT_SCALE_LOOP = 0x29,
+ PMBUS_VOUT_SCALE_MONITOR = 0x2A,
+
+ PMBUS_COEFFICIENTS = 0x30,
+ PMBUS_POUT_MAX = 0x31,
+
+ PMBUS_FAN_CONFIG_12 = 0x3A,
+ PMBUS_FAN_COMMAND_1 = 0x3B,
+ PMBUS_FAN_COMMAND_2 = 0x3C,
+ PMBUS_FAN_CONFIG_34 = 0x3D,
+ PMBUS_FAN_COMMAND_3 = 0x3E,
+ PMBUS_FAN_COMMAND_4 = 0x3F,
+
+ PMBUS_VOUT_OV_FAULT_LIMIT = 0x40,
+ PMBUS_VOUT_OV_FAULT_RESPONSE = 0x41,
+ PMBUS_VOUT_OV_WARN_LIMIT = 0x42,
+ PMBUS_VOUT_UV_WARN_LIMIT = 0x43,
+ PMBUS_VOUT_UV_FAULT_LIMIT = 0x44,
+ PMBUS_VOUT_UV_FAULT_RESPONSE = 0x45,
+ PMBUS_IOUT_OC_FAULT_LIMIT = 0x46,
+ PMBUS_IOUT_OC_FAULT_RESPONSE = 0x47,
+ PMBUS_IOUT_OC_LV_FAULT_LIMIT = 0x48,
+ PMBUS_IOUT_OC_LV_FAULT_RESPONSE = 0x49,
+ PMBUS_IOUT_OC_WARN_LIMIT = 0x4A,
+ PMBUS_IOUT_UC_FAULT_LIMIT = 0x4B,
+ PMBUS_IOUT_UC_FAULT_RESPONSE = 0x4C,
+
+ PMBUS_OT_FAULT_LIMIT = 0x4F,
+ PMBUS_OT_FAULT_RESPONSE = 0x50,
+ PMBUS_OT_WARN_LIMIT = 0x51,
+ PMBUS_UT_WARN_LIMIT = 0x52,
+ PMBUS_UT_FAULT_LIMIT = 0x53,
+ PMBUS_UT_FAULT_RESPONSE = 0x54,
+ PMBUS_VIN_OV_FAULT_LIMIT = 0x55,
+ PMBUS_VIN_OV_FAULT_RESPONSE = 0x56,
+ PMBUS_VIN_OV_WARN_LIMIT = 0x57,
+ PMBUS_VIN_UV_WARN_LIMIT = 0x58,
+ PMBUS_VIN_UV_FAULT_LIMIT = 0x59,
+
+ PMBUS_IIN_OC_FAULT_LIMIT = 0x5B,
+ PMBUS_IIN_OC_WARN_LIMIT = 0x5D,
+
+ PMBUS_POUT_OP_FAULT_LIMIT = 0x68,
+ PMBUS_POUT_OP_WARN_LIMIT = 0x6A,
+ PMBUS_PIN_OP_WARN_LIMIT = 0x6B,
+
+ PMBUS_STATUS_BYTE = 0x78,
+ PMBUS_STATUS_WORD = 0x79,
+ PMBUS_STATUS_VOUT = 0x7A,
+ PMBUS_STATUS_IOUT = 0x7B,
+ PMBUS_STATUS_INPUT = 0x7C,
+ PMBUS_STATUS_TEMPERATURE = 0x7D,
+ PMBUS_STATUS_CML = 0x7E,
+ PMBUS_STATUS_OTHER = 0x7F,
+ PMBUS_STATUS_MFR_SPECIFIC = 0x80,
+ PMBUS_STATUS_FAN_12 = 0x81,
+ PMBUS_STATUS_FAN_34 = 0x82,
+
+ PMBUS_READ_VIN = 0x88,
+ PMBUS_READ_IIN = 0x89,
+ PMBUS_READ_VCAP = 0x8A,
+ PMBUS_READ_VOUT = 0x8B,
+ PMBUS_READ_IOUT = 0x8C,
+ PMBUS_READ_TEMPERATURE_1 = 0x8D,
+ PMBUS_READ_TEMPERATURE_2 = 0x8E,
+ PMBUS_READ_TEMPERATURE_3 = 0x8F,
+ PMBUS_READ_FAN_SPEED_1 = 0x90,
+ PMBUS_READ_FAN_SPEED_2 = 0x91,
+ PMBUS_READ_FAN_SPEED_3 = 0x92,
+ PMBUS_READ_FAN_SPEED_4 = 0x93,
+ PMBUS_READ_DUTY_CYCLE = 0x94,
+ PMBUS_READ_FREQUENCY = 0x95,
+ PMBUS_READ_POUT = 0x96,
+ PMBUS_READ_PIN = 0x97,
+
+ PMBUS_REVISION = 0x98,
+ PMBUS_MFR_ID = 0x99,
+ PMBUS_MFR_MODEL = 0x9A,
+ PMBUS_MFR_REVISION = 0x9B,
+ PMBUS_MFR_LOCATION = 0x9C,
+ PMBUS_MFR_DATE = 0x9D,
+ PMBUS_MFR_SERIAL = 0x9E,
+
+/*
+ * Virtual registers.
+ * Useful to support attributes which are not supported by standard PMBus
+ * registers but exist as manufacturer specific registers on individual chips.
+ * Must be mapped to real registers in device specific code.
+ *
+ * Semantics:
+ * Virtual registers are all word size.
+ * READ registers are read-only; writes are either ignored or return an error.
+ * RESET registers are read/write. Reading reset registers returns zero
+ * (used for detection), writing any value causes the associated history to be
+ * reset.
+ * Virtual registers have to be handled in device specific driver code. Chip
+ * driver code returns non-negative register values if a virtual register is
+ * supported, or a negative error code if not. The chip driver may return
+ * -ENODATA or any other error code in this case, though an error code other
+ * than -ENODATA is handled more efficiently and thus preferred. Either case,
+ * the calling PMBus core code will abort if the chip driver returns an error
+ * code when reading or writing virtual registers.
+ */
+ PMBUS_VIRT_BASE = 0x100,
+ PMBUS_VIRT_READ_TEMP_AVG,
+ PMBUS_VIRT_READ_TEMP_MIN,
+ PMBUS_VIRT_READ_TEMP_MAX,
+ PMBUS_VIRT_RESET_TEMP_HISTORY,
+ PMBUS_VIRT_READ_VIN_AVG,
+ PMBUS_VIRT_READ_VIN_MIN,
+ PMBUS_VIRT_READ_VIN_MAX,
+ PMBUS_VIRT_RESET_VIN_HISTORY,
+ PMBUS_VIRT_READ_IIN_AVG,
+ PMBUS_VIRT_READ_IIN_MIN,
+ PMBUS_VIRT_READ_IIN_MAX,
+ PMBUS_VIRT_RESET_IIN_HISTORY,
+ PMBUS_VIRT_READ_PIN_AVG,
+ PMBUS_VIRT_READ_PIN_MIN,
+ PMBUS_VIRT_READ_PIN_MAX,
+ PMBUS_VIRT_RESET_PIN_HISTORY,
+ PMBUS_VIRT_READ_POUT_AVG,
+ PMBUS_VIRT_READ_POUT_MIN,
+ PMBUS_VIRT_READ_POUT_MAX,
+ PMBUS_VIRT_RESET_POUT_HISTORY,
+ PMBUS_VIRT_READ_VOUT_AVG,
+ PMBUS_VIRT_READ_VOUT_MIN,
+ PMBUS_VIRT_READ_VOUT_MAX,
+ PMBUS_VIRT_RESET_VOUT_HISTORY,
+ PMBUS_VIRT_READ_IOUT_AVG,
+ PMBUS_VIRT_READ_IOUT_MIN,
+ PMBUS_VIRT_READ_IOUT_MAX,
+ PMBUS_VIRT_RESET_IOUT_HISTORY,
+ PMBUS_VIRT_READ_TEMP2_AVG,
+ PMBUS_VIRT_READ_TEMP2_MIN,
+ PMBUS_VIRT_READ_TEMP2_MAX,
+ PMBUS_VIRT_RESET_TEMP2_HISTORY,
+
+ PMBUS_VIRT_READ_VMON,
+ PMBUS_VIRT_VMON_UV_WARN_LIMIT,
+ PMBUS_VIRT_VMON_OV_WARN_LIMIT,
+ PMBUS_VIRT_VMON_UV_FAULT_LIMIT,
+ PMBUS_VIRT_VMON_OV_FAULT_LIMIT,
+ PMBUS_VIRT_STATUS_VMON,
+
+ /*
+ * RPM and PWM Fan control
+ *
+ * Drivers wanting to expose PWM control must define the behaviour of
+ * PMBUS_VIRT_PWM_[1-4] and PMBUS_VIRT_PWM_ENABLE_[1-4] in the
+ * {read,write}_word_data callback.
+ *
+ * pmbus core provides a default implementation for
+ * PMBUS_VIRT_FAN_TARGET_[1-4].
+ *
+ * TARGET, PWM and PWM_ENABLE members must be defined sequentially;
+ * pmbus core uses the difference between the provided register and
+ * it's _1 counterpart to calculate the FAN/PWM ID.
+ */
+ PMBUS_VIRT_FAN_TARGET_1,
+ PMBUS_VIRT_FAN_TARGET_2,
+ PMBUS_VIRT_FAN_TARGET_3,
+ PMBUS_VIRT_FAN_TARGET_4,
+ PMBUS_VIRT_PWM_1,
+ PMBUS_VIRT_PWM_2,
+ PMBUS_VIRT_PWM_3,
+ PMBUS_VIRT_PWM_4,
+ PMBUS_VIRT_PWM_ENABLE_1,
+ PMBUS_VIRT_PWM_ENABLE_2,
+ PMBUS_VIRT_PWM_ENABLE_3,
+ PMBUS_VIRT_PWM_ENABLE_4,
+};
+
+/*
+ * OPERATION
+ */
+#define PB_OPERATION_CONTROL_ON BIT(7)
+
+/*
+ * CAPABILITY
+ */
+#define PB_CAPABILITY_SMBALERT BIT(4)
+#define PB_CAPABILITY_ERROR_CHECK BIT(7)
+
+/*
+ * VOUT_MODE
+ */
+#define PB_VOUT_MODE_MODE_MASK 0xe0
+#define PB_VOUT_MODE_PARAM_MASK 0x1f
+
+#define PB_VOUT_MODE_LINEAR 0x00
+#define PB_VOUT_MODE_VID 0x20
+#define PB_VOUT_MODE_DIRECT 0x40
+
+/*
+ * Fan configuration
+ */
+#define PB_FAN_2_PULSE_MASK (BIT(0) | BIT(1))
+#define PB_FAN_2_RPM BIT(2)
+#define PB_FAN_2_INSTALLED BIT(3)
+#define PB_FAN_1_PULSE_MASK (BIT(4) | BIT(5))
+#define PB_FAN_1_RPM BIT(6)
+#define PB_FAN_1_INSTALLED BIT(7)
+
+enum pmbus_fan_mode { percent = 0, rpm };
+
+/*
+ * STATUS_BYTE, STATUS_WORD (lower)
+ */
+#define PB_STATUS_NONE_ABOVE BIT(0)
+#define PB_STATUS_CML BIT(1)
+#define PB_STATUS_TEMPERATURE BIT(2)
+#define PB_STATUS_VIN_UV BIT(3)
+#define PB_STATUS_IOUT_OC BIT(4)
+#define PB_STATUS_VOUT_OV BIT(5)
+#define PB_STATUS_OFF BIT(6)
+#define PB_STATUS_BUSY BIT(7)
+
+/*
+ * STATUS_WORD (upper)
+ */
+#define PB_STATUS_UNKNOWN BIT(8)
+#define PB_STATUS_OTHER BIT(9)
+#define PB_STATUS_FANS BIT(10)
+#define PB_STATUS_POWER_GOOD_N BIT(11)
+#define PB_STATUS_WORD_MFR BIT(12)
+#define PB_STATUS_INPUT BIT(13)
+#define PB_STATUS_IOUT_POUT BIT(14)
+#define PB_STATUS_VOUT BIT(15)
+
+/*
+ * STATUS_IOUT
+ */
+#define PB_POUT_OP_WARNING BIT(0)
+#define PB_POUT_OP_FAULT BIT(1)
+#define PB_POWER_LIMITING BIT(2)
+#define PB_CURRENT_SHARE_FAULT BIT(3)
+#define PB_IOUT_UC_FAULT BIT(4)
+#define PB_IOUT_OC_WARNING BIT(5)
+#define PB_IOUT_OC_LV_FAULT BIT(6)
+#define PB_IOUT_OC_FAULT BIT(7)
+
+/*
+ * STATUS_VOUT, STATUS_INPUT
+ */
+#define PB_VOLTAGE_VIN_OFF BIT(3)
+#define PB_VOLTAGE_UV_FAULT BIT(4)
+#define PB_VOLTAGE_UV_WARNING BIT(5)
+#define PB_VOLTAGE_OV_WARNING BIT(6)
+#define PB_VOLTAGE_OV_FAULT BIT(7)
+
+/*
+ * STATUS_INPUT
+ */
+#define PB_PIN_OP_WARNING BIT(0)
+#define PB_IIN_OC_WARNING BIT(1)
+#define PB_IIN_OC_FAULT BIT(2)
+
+/*
+ * STATUS_TEMPERATURE
+ */
+#define PB_TEMP_UT_FAULT BIT(4)
+#define PB_TEMP_UT_WARNING BIT(5)
+#define PB_TEMP_OT_WARNING BIT(6)
+#define PB_TEMP_OT_FAULT BIT(7)
+
+/*
+ * STATUS_FAN
+ */
+#define PB_FAN_AIRFLOW_WARNING BIT(0)
+#define PB_FAN_AIRFLOW_FAULT BIT(1)
+#define PB_FAN_FAN2_SPEED_OVERRIDE BIT(2)
+#define PB_FAN_FAN1_SPEED_OVERRIDE BIT(3)
+#define PB_FAN_FAN2_WARNING BIT(4)
+#define PB_FAN_FAN1_WARNING BIT(5)
+#define PB_FAN_FAN2_FAULT BIT(6)
+#define PB_FAN_FAN1_FAULT BIT(7)
+
+/*
+ * CML_FAULT_STATUS
+ */
+#define PB_CML_FAULT_OTHER_MEM_LOGIC BIT(0)
+#define PB_CML_FAULT_OTHER_COMM BIT(1)
+#define PB_CML_FAULT_PROCESSOR BIT(3)
+#define PB_CML_FAULT_MEMORY BIT(4)
+#define PB_CML_FAULT_PACKET_ERROR BIT(5)
+#define PB_CML_FAULT_INVALID_DATA BIT(6)
+#define PB_CML_FAULT_INVALID_COMMAND BIT(7)
+
+enum pmbus_sensor_classes {
+ PSC_VOLTAGE_IN = 0,
+ PSC_VOLTAGE_OUT,
+ PSC_CURRENT_IN,
+ PSC_CURRENT_OUT,
+ PSC_POWER,
+ PSC_TEMPERATURE,
+ PSC_FAN,
+ PSC_PWM,
+ PSC_NUM_CLASSES /* Number of power sensor classes */
+};
+
+#define PMBUS_PAGES 32 /* Per PMBus specification */
+
+/* Functionality bit mask */
+#define PMBUS_HAVE_VIN BIT(0)
+#define PMBUS_HAVE_VCAP BIT(1)
+#define PMBUS_HAVE_VOUT BIT(2)
+#define PMBUS_HAVE_IIN BIT(3)
+#define PMBUS_HAVE_IOUT BIT(4)
+#define PMBUS_HAVE_PIN BIT(5)
+#define PMBUS_HAVE_POUT BIT(6)
+#define PMBUS_HAVE_FAN12 BIT(7)
+#define PMBUS_HAVE_FAN34 BIT(8)
+#define PMBUS_HAVE_TEMP BIT(9)
+#define PMBUS_HAVE_TEMP2 BIT(10)
+#define PMBUS_HAVE_TEMP3 BIT(11)
+#define PMBUS_HAVE_STATUS_VOUT BIT(12)
+#define PMBUS_HAVE_STATUS_IOUT BIT(13)
+#define PMBUS_HAVE_STATUS_INPUT BIT(14)
+#define PMBUS_HAVE_STATUS_TEMP BIT(15)
+#define PMBUS_HAVE_STATUS_FAN12 BIT(16)
+#define PMBUS_HAVE_STATUS_FAN34 BIT(17)
+#define PMBUS_HAVE_VMON BIT(18)
+#define PMBUS_HAVE_STATUS_VMON BIT(19)
+#define PMBUS_HAVE_PWM12 BIT(20)
+#define PMBUS_HAVE_PWM34 BIT(21)
+
+#define PMBUS_PAGE_VIRTUAL BIT(31)
+
+enum pmbus_data_format { linear = 0, direct, vid };
+enum vrm_version { vr11 = 0, vr12, vr13 };
+
+struct pmbus_driver_info {
+ int pages; /* Total number of pages */
+ enum pmbus_data_format format[PSC_NUM_CLASSES];
+ enum vrm_version vrm_version;
+ /*
+ * Support one set of coefficients for each sensor type
+ * Used for chips providing data in direct mode.
+ */
+ int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */
+ int b[PSC_NUM_CLASSES]; /* offset */
+ int R[PSC_NUM_CLASSES]; /* exponent */
+
+ u32 func[PMBUS_PAGES]; /* Functionality, per page */
+ /*
+ * The following functions map manufacturing specific register values
+ * to PMBus standard register values. Specify only if mapping is
+ * necessary.
+ * Functions return the register value (read) or zero (write) if
+ * successful. A return value of -ENODATA indicates that there is no
+ * manufacturer specific register, but that a standard PMBus register
+ * may exist. Any other negative return value indicates that the
+ * register does not exist, and that no attempt should be made to read
+ * the standard register.
+ */
+ int (*read_byte_data)(struct i2c_client *client, int page, int reg);
+ int (*read_word_data)(struct i2c_client *client, int page, int reg);
+ int (*write_word_data)(struct i2c_client *client, int page, int reg,
+ u16 word);
+ int (*write_byte)(struct i2c_client *client, int page, u8 value);
+ /*
+ * The identify function determines supported PMBus functionality.
+ * This function is only necessary if a chip driver supports multiple
+ * chips, and the chip functionality is not pre-determined.
+ */
+ int (*identify)(struct i2c_client *client,
+ struct pmbus_driver_info *info);
+
+ /* Regulator functionality, if supported by this chip driver. */
+ int num_regulators;
+ const struct regulator_desc *reg_desc;
+};
+
+/* Regulator ops */
+
+extern const struct regulator_ops pmbus_regulator_ops;
+
+/* Macro for filling in array of struct regulator_desc */
+#define PMBUS_REGULATOR(_name, _id) \
+ [_id] = { \
+ .name = (_name # _id), \
+ .id = (_id), \
+ .of_match = of_match_ptr(_name # _id), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .ops = &pmbus_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }
+
+/* Function declarations */
+
+void pmbus_clear_cache(struct i2c_client *client);
+int pmbus_set_page(struct i2c_client *client, int page);
+int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg);
+int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg, u16 word);
+int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
+int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
+int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,
+ u8 value);
+int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
+ u8 mask, u8 value);
+void pmbus_clear_faults(struct i2c_client *client);
+bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
+bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
+int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
+ struct pmbus_driver_info *info);
+int pmbus_do_remove(struct i2c_client *client);
+const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client
+ *client);
+int pmbus_get_fan_rate_device(struct i2c_client *client, int page, int id,
+ enum pmbus_fan_mode mode);
+int pmbus_get_fan_rate_cached(struct i2c_client *client, int page, int id,
+ enum pmbus_fan_mode mode);
+int pmbus_update_fan(struct i2c_client *client, int page, int id,
+ u8 config, u8 mask, u16 command);
+struct dentry *pmbus_get_debugfs_dir(struct i2c_client *client);
+
+#endif /* PMBUS_H */
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
new file mode 100644
index 000000000..bef28e955
--- /dev/null
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -0,0 +1,2450 @@
+/*
+ * Hardware monitoring driver for PMBus devices
+ *
+ * Copyright (c) 2010, 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/pmbus.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include "pmbus.h"
+
+/*
+ * Number of additional attribute pointers to allocate
+ * with each call to krealloc
+ */
+#define PMBUS_ATTR_ALLOC_SIZE 32
+
+/*
+ * Index into status register array, per status register group
+ */
+#define PB_STATUS_BASE 0
+#define PB_STATUS_VOUT_BASE (PB_STATUS_BASE + PMBUS_PAGES)
+#define PB_STATUS_IOUT_BASE (PB_STATUS_VOUT_BASE + PMBUS_PAGES)
+#define PB_STATUS_FAN_BASE (PB_STATUS_IOUT_BASE + PMBUS_PAGES)
+#define PB_STATUS_FAN34_BASE (PB_STATUS_FAN_BASE + PMBUS_PAGES)
+#define PB_STATUS_TEMP_BASE (PB_STATUS_FAN34_BASE + PMBUS_PAGES)
+#define PB_STATUS_INPUT_BASE (PB_STATUS_TEMP_BASE + PMBUS_PAGES)
+#define PB_STATUS_VMON_BASE (PB_STATUS_INPUT_BASE + 1)
+
+#define PB_NUM_STATUS_REG (PB_STATUS_VMON_BASE + 1)
+
+#define PMBUS_NAME_SIZE 24
+
+struct pmbus_sensor {
+ struct pmbus_sensor *next;
+ char name[PMBUS_NAME_SIZE]; /* sysfs sensor name */
+ struct device_attribute attribute;
+ u8 page; /* page number */
+ u16 reg; /* register */
+ enum pmbus_sensor_classes class; /* sensor class */
+ bool update; /* runtime sensor update needed */
+ bool convert; /* Whether or not to apply linear/vid/direct */
+ int data; /* Sensor data.
+ Negative if there was a read error */
+};
+#define to_pmbus_sensor(_attr) \
+ container_of(_attr, struct pmbus_sensor, attribute)
+
+struct pmbus_boolean {
+ char name[PMBUS_NAME_SIZE]; /* sysfs boolean name */
+ struct sensor_device_attribute attribute;
+ struct pmbus_sensor *s1;
+ struct pmbus_sensor *s2;
+};
+#define to_pmbus_boolean(_attr) \
+ container_of(_attr, struct pmbus_boolean, attribute)
+
+struct pmbus_label {
+ char name[PMBUS_NAME_SIZE]; /* sysfs label name */
+ struct device_attribute attribute;
+ char label[PMBUS_NAME_SIZE]; /* label */
+};
+#define to_pmbus_label(_attr) \
+ container_of(_attr, struct pmbus_label, attribute)
+
+struct pmbus_data {
+ struct device *dev;
+ struct device *hwmon_dev;
+
+ u32 flags; /* from platform data */
+
+ int exponent[PMBUS_PAGES];
+ /* linear mode: exponent for output voltages */
+
+ const struct pmbus_driver_info *info;
+
+ int max_attributes;
+ int num_attributes;
+ struct attribute_group group;
+ const struct attribute_group *groups[2];
+ struct dentry *debugfs; /* debugfs device directory */
+
+ struct pmbus_sensor *sensors;
+
+ struct mutex update_lock;
+ bool valid;
+ unsigned long last_updated; /* in jiffies */
+
+ /*
+ * A single status register covers multiple attributes,
+ * so we keep them all together.
+ */
+ u16 status[PB_NUM_STATUS_REG];
+
+ bool has_status_word; /* device uses STATUS_WORD register */
+ int (*read_status)(struct i2c_client *client, int page);
+
+ u8 currpage;
+};
+
+struct pmbus_debugfs_entry {
+ struct i2c_client *client;
+ u8 page;
+ u8 reg;
+};
+
+static const int pmbus_fan_rpm_mask[] = {
+ PB_FAN_1_RPM,
+ PB_FAN_2_RPM,
+ PB_FAN_1_RPM,
+ PB_FAN_2_RPM,
+};
+
+static const int pmbus_fan_config_registers[] = {
+ PMBUS_FAN_CONFIG_12,
+ PMBUS_FAN_CONFIG_12,
+ PMBUS_FAN_CONFIG_34,
+ PMBUS_FAN_CONFIG_34
+};
+
+static const int pmbus_fan_command_registers[] = {
+ PMBUS_FAN_COMMAND_1,
+ PMBUS_FAN_COMMAND_2,
+ PMBUS_FAN_COMMAND_3,
+ PMBUS_FAN_COMMAND_4,
+};
+
+void pmbus_clear_cache(struct i2c_client *client)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+
+ data->valid = false;
+}
+EXPORT_SYMBOL_GPL(pmbus_clear_cache);
+
+int pmbus_set_page(struct i2c_client *client, int page)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ int rv;
+
+ if (page < 0 || page == data->currpage)
+ return 0;
+
+ if (!(data->info->func[page] & PMBUS_PAGE_VIRTUAL)) {
+ rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
+ if (rv < 0)
+ return rv;
+
+ rv = i2c_smbus_read_byte_data(client, PMBUS_PAGE);
+ if (rv < 0)
+ return rv;
+
+ if (rv != page)
+ return -EIO;
+ }
+
+ data->currpage = page;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pmbus_set_page);
+
+int pmbus_write_byte(struct i2c_client *client, int page, u8 value)
+{
+ int rv;
+
+ rv = pmbus_set_page(client, page);
+ if (rv < 0)
+ return rv;
+
+ return i2c_smbus_write_byte(client, value);
+}
+EXPORT_SYMBOL_GPL(pmbus_write_byte);
+
+/*
+ * _pmbus_write_byte() is similar to pmbus_write_byte(), but checks if
+ * a device specific mapping function exists and calls it if necessary.
+ */
+static int _pmbus_write_byte(struct i2c_client *client, int page, u8 value)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ const struct pmbus_driver_info *info = data->info;
+ int status;
+
+ if (info->write_byte) {
+ status = info->write_byte(client, page, value);
+ if (status != -ENODATA)
+ return status;
+ }
+ return pmbus_write_byte(client, page, value);
+}
+
+int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg,
+ u16 word)
+{
+ int rv;
+
+ rv = pmbus_set_page(client, page);
+ if (rv < 0)
+ return rv;
+
+ return i2c_smbus_write_word_data(client, reg, word);
+}
+EXPORT_SYMBOL_GPL(pmbus_write_word_data);
+
+
+static int pmbus_write_virt_reg(struct i2c_client *client, int page, int reg,
+ u16 word)
+{
+ int bit;
+ int id;
+ int rv;
+
+ switch (reg) {
+ case PMBUS_VIRT_FAN_TARGET_1 ... PMBUS_VIRT_FAN_TARGET_4:
+ id = reg - PMBUS_VIRT_FAN_TARGET_1;
+ bit = pmbus_fan_rpm_mask[id];
+ rv = pmbus_update_fan(client, page, id, bit, bit, word);
+ break;
+ default:
+ rv = -ENXIO;
+ break;
+ }
+
+ return rv;
+}
+
+/*
+ * _pmbus_write_word_data() is similar to pmbus_write_word_data(), but checks if
+ * a device specific mapping function exists and calls it if necessary.
+ */
+static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg,
+ u16 word)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ const struct pmbus_driver_info *info = data->info;
+ int status;
+
+ if (info->write_word_data) {
+ status = info->write_word_data(client, page, reg, word);
+ if (status != -ENODATA)
+ return status;
+ }
+
+ if (reg >= PMBUS_VIRT_BASE)
+ return pmbus_write_virt_reg(client, page, reg, word);
+
+ return pmbus_write_word_data(client, page, reg, word);
+}
+
+int pmbus_update_fan(struct i2c_client *client, int page, int id,
+ u8 config, u8 mask, u16 command)
+{
+ int from;
+ int rv;
+ u8 to;
+
+ from = pmbus_read_byte_data(client, page,
+ pmbus_fan_config_registers[id]);
+ if (from < 0)
+ return from;
+
+ to = (from & ~mask) | (config & mask);
+ if (to != from) {
+ rv = pmbus_write_byte_data(client, page,
+ pmbus_fan_config_registers[id], to);
+ if (rv < 0)
+ return rv;
+ }
+
+ return _pmbus_write_word_data(client, page,
+ pmbus_fan_command_registers[id], command);
+}
+EXPORT_SYMBOL_GPL(pmbus_update_fan);
+
+int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg)
+{
+ int rv;
+
+ rv = pmbus_set_page(client, page);
+ if (rv < 0)
+ return rv;
+
+ return i2c_smbus_read_word_data(client, reg);
+}
+EXPORT_SYMBOL_GPL(pmbus_read_word_data);
+
+static int pmbus_read_virt_reg(struct i2c_client *client, int page, int reg)
+{
+ int rv;
+ int id;
+
+ switch (reg) {
+ case PMBUS_VIRT_FAN_TARGET_1 ... PMBUS_VIRT_FAN_TARGET_4:
+ id = reg - PMBUS_VIRT_FAN_TARGET_1;
+ rv = pmbus_get_fan_rate_device(client, page, id, rpm);
+ break;
+ default:
+ rv = -ENXIO;
+ break;
+ }
+
+ return rv;
+}
+
+/*
+ * _pmbus_read_word_data() is similar to pmbus_read_word_data(), but checks if
+ * a device specific mapping function exists and calls it if necessary.
+ */
+static int _pmbus_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ const struct pmbus_driver_info *info = data->info;
+ int status;
+
+ if (info->read_word_data) {
+ status = info->read_word_data(client, page, reg);
+ if (status != -ENODATA)
+ return status;
+ }
+
+ if (reg >= PMBUS_VIRT_BASE)
+ return pmbus_read_virt_reg(client, page, reg);
+
+ return pmbus_read_word_data(client, page, reg);
+}
+
+int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg)
+{
+ int rv;
+
+ rv = pmbus_set_page(client, page);
+ if (rv < 0)
+ return rv;
+
+ return i2c_smbus_read_byte_data(client, reg);
+}
+EXPORT_SYMBOL_GPL(pmbus_read_byte_data);
+
+int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, u8 value)
+{
+ int rv;
+
+ rv = pmbus_set_page(client, page);
+ if (rv < 0)
+ return rv;
+
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+EXPORT_SYMBOL_GPL(pmbus_write_byte_data);
+
+int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
+ u8 mask, u8 value)
+{
+ unsigned int tmp;
+ int rv;
+
+ rv = pmbus_read_byte_data(client, page, reg);
+ if (rv < 0)
+ return rv;
+
+ tmp = (rv & ~mask) | (value & mask);
+
+ if (tmp != rv)
+ rv = pmbus_write_byte_data(client, page, reg, tmp);
+
+ return rv;
+}
+EXPORT_SYMBOL_GPL(pmbus_update_byte_data);
+
+/*
+ * _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if
+ * a device specific mapping function exists and calls it if necessary.
+ */
+static int _pmbus_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ const struct pmbus_driver_info *info = data->info;
+ int status;
+
+ if (info->read_byte_data) {
+ status = info->read_byte_data(client, page, reg);
+ if (status != -ENODATA)
+ return status;
+ }
+ return pmbus_read_byte_data(client, page, reg);
+}
+
+static struct pmbus_sensor *pmbus_find_sensor(struct pmbus_data *data, int page,
+ int reg)
+{
+ struct pmbus_sensor *sensor;
+
+ for (sensor = data->sensors; sensor; sensor = sensor->next) {
+ if (sensor->page == page && sensor->reg == reg)
+ return sensor;
+ }
+
+ return ERR_PTR(-EINVAL);
+}
+
+static int pmbus_get_fan_rate(struct i2c_client *client, int page, int id,
+ enum pmbus_fan_mode mode,
+ bool from_cache)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ bool want_rpm, have_rpm;
+ struct pmbus_sensor *s;
+ int config;
+ int reg;
+
+ want_rpm = (mode == rpm);
+
+ if (from_cache) {
+ reg = want_rpm ? PMBUS_VIRT_FAN_TARGET_1 : PMBUS_VIRT_PWM_1;
+ s = pmbus_find_sensor(data, page, reg + id);
+ if (IS_ERR(s))
+ return PTR_ERR(s);
+
+ return s->data;
+ }
+
+ config = pmbus_read_byte_data(client, page,
+ pmbus_fan_config_registers[id]);
+ if (config < 0)
+ return config;
+
+ have_rpm = !!(config & pmbus_fan_rpm_mask[id]);
+ if (want_rpm == have_rpm)
+ return pmbus_read_word_data(client, page,
+ pmbus_fan_command_registers[id]);
+
+ /* Can't sensibly map between RPM and PWM, just return zero */
+ return 0;
+}
+
+int pmbus_get_fan_rate_device(struct i2c_client *client, int page, int id,
+ enum pmbus_fan_mode mode)
+{
+ return pmbus_get_fan_rate(client, page, id, mode, false);
+}
+EXPORT_SYMBOL_GPL(pmbus_get_fan_rate_device);
+
+int pmbus_get_fan_rate_cached(struct i2c_client *client, int page, int id,
+ enum pmbus_fan_mode mode)
+{
+ return pmbus_get_fan_rate(client, page, id, mode, true);
+}
+EXPORT_SYMBOL_GPL(pmbus_get_fan_rate_cached);
+
+static void pmbus_clear_fault_page(struct i2c_client *client, int page)
+{
+ _pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
+}
+
+void pmbus_clear_faults(struct i2c_client *client)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < data->info->pages; i++)
+ pmbus_clear_fault_page(client, i);
+}
+EXPORT_SYMBOL_GPL(pmbus_clear_faults);
+
+static int pmbus_check_status_cml(struct i2c_client *client)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ int status, status2;
+
+ status = data->read_status(client, -1);
+ if (status < 0 || (status & PB_STATUS_CML)) {
+ status2 = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
+ if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND))
+ return -EIO;
+ }
+ return 0;
+}
+
+static bool pmbus_check_register(struct i2c_client *client,
+ int (*func)(struct i2c_client *client,
+ int page, int reg),
+ int page, int reg)
+{
+ int rv;
+ struct pmbus_data *data = i2c_get_clientdata(client);
+
+ rv = func(client, page, reg);
+ if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
+ rv = pmbus_check_status_cml(client);
+ pmbus_clear_fault_page(client, -1);
+ return rv >= 0;
+}
+
+static bool pmbus_check_status_register(struct i2c_client *client, int page)
+{
+ int status;
+ struct pmbus_data *data = i2c_get_clientdata(client);
+
+ status = data->read_status(client, page);
+ if (status >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK) &&
+ (status & PB_STATUS_CML)) {
+ status = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
+ if (status < 0 || (status & PB_CML_FAULT_INVALID_COMMAND))
+ status = -EIO;
+ }
+
+ pmbus_clear_fault_page(client, -1);
+ return status >= 0;
+}
+
+bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg)
+{
+ return pmbus_check_register(client, _pmbus_read_byte_data, page, reg);
+}
+EXPORT_SYMBOL_GPL(pmbus_check_byte_register);
+
+bool pmbus_check_word_register(struct i2c_client *client, int page, int reg)
+{
+ return pmbus_check_register(client, _pmbus_read_word_data, page, reg);
+}
+EXPORT_SYMBOL_GPL(pmbus_check_word_register);
+
+const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+
+ return data->info;
+}
+EXPORT_SYMBOL_GPL(pmbus_get_driver_info);
+
+static struct _pmbus_status {
+ u32 func;
+ u16 base;
+ u16 reg;
+} pmbus_status[] = {
+ { PMBUS_HAVE_STATUS_VOUT, PB_STATUS_VOUT_BASE, PMBUS_STATUS_VOUT },
+ { PMBUS_HAVE_STATUS_IOUT, PB_STATUS_IOUT_BASE, PMBUS_STATUS_IOUT },
+ { PMBUS_HAVE_STATUS_TEMP, PB_STATUS_TEMP_BASE,
+ PMBUS_STATUS_TEMPERATURE },
+ { PMBUS_HAVE_STATUS_FAN12, PB_STATUS_FAN_BASE, PMBUS_STATUS_FAN_12 },
+ { PMBUS_HAVE_STATUS_FAN34, PB_STATUS_FAN34_BASE, PMBUS_STATUS_FAN_34 },
+};
+
+static struct pmbus_data *pmbus_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ const struct pmbus_driver_info *info = data->info;
+ struct pmbus_sensor *sensor;
+
+ mutex_lock(&data->update_lock);
+ if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+ int i, j;
+
+ for (i = 0; i < info->pages; i++) {
+ data->status[PB_STATUS_BASE + i]
+ = data->read_status(client, i);
+ for (j = 0; j < ARRAY_SIZE(pmbus_status); j++) {
+ struct _pmbus_status *s = &pmbus_status[j];
+
+ if (!(info->func[i] & s->func))
+ continue;
+ data->status[s->base + i]
+ = _pmbus_read_byte_data(client, i,
+ s->reg);
+ }
+ }
+
+ if (info->func[0] & PMBUS_HAVE_STATUS_INPUT)
+ data->status[PB_STATUS_INPUT_BASE]
+ = _pmbus_read_byte_data(client, 0,
+ PMBUS_STATUS_INPUT);
+
+ if (info->func[0] & PMBUS_HAVE_STATUS_VMON)
+ data->status[PB_STATUS_VMON_BASE]
+ = _pmbus_read_byte_data(client, 0,
+ PMBUS_VIRT_STATUS_VMON);
+
+ for (sensor = data->sensors; sensor; sensor = sensor->next) {
+ if (!data->valid || sensor->update)
+ sensor->data
+ = _pmbus_read_word_data(client,
+ sensor->page,
+ sensor->reg);
+ }
+ pmbus_clear_faults(client);
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+ mutex_unlock(&data->update_lock);
+ return data;
+}
+
+/*
+ * Convert linear sensor values to milli- or micro-units
+ * depending on sensor type.
+ */
+static long pmbus_reg2data_linear(struct pmbus_data *data,
+ struct pmbus_sensor *sensor)
+{
+ s16 exponent;
+ s32 mantissa;
+ long val;
+
+ if (sensor->class == PSC_VOLTAGE_OUT) { /* LINEAR16 */
+ exponent = data->exponent[sensor->page];
+ mantissa = (u16) sensor->data;
+ } else { /* LINEAR11 */
+ exponent = ((s16)sensor->data) >> 11;
+ mantissa = ((s16)((sensor->data & 0x7ff) << 5)) >> 5;
+ }
+
+ val = mantissa;
+
+ /* scale result to milli-units for all sensors except fans */
+ if (sensor->class != PSC_FAN)
+ val = val * 1000L;
+
+ /* scale result to micro-units for power sensors */
+ if (sensor->class == PSC_POWER)
+ val = val * 1000L;
+
+ if (exponent >= 0)
+ val <<= exponent;
+ else
+ val >>= -exponent;
+
+ return val;
+}
+
+/*
+ * Convert direct sensor values to milli- or micro-units
+ * depending on sensor type.
+ */
+static long pmbus_reg2data_direct(struct pmbus_data *data,
+ struct pmbus_sensor *sensor)
+{
+ s64 b, val = (s16)sensor->data;
+ s32 m, R;
+
+ m = data->info->m[sensor->class];
+ b = data->info->b[sensor->class];
+ R = data->info->R[sensor->class];
+
+ if (m == 0)
+ return 0;
+
+ /* X = 1/m * (Y * 10^-R - b) */
+ R = -R;
+ /* scale result to milli-units for everything but fans */
+ if (!(sensor->class == PSC_FAN || sensor->class == PSC_PWM)) {
+ R += 3;
+ b *= 1000;
+ }
+
+ /* scale result to micro-units for power sensors */
+ if (sensor->class == PSC_POWER) {
+ R += 3;
+ b *= 1000;
+ }
+
+ while (R > 0) {
+ val *= 10;
+ R--;
+ }
+ while (R < 0) {
+ val = div_s64(val + 5LL, 10L); /* round closest */
+ R++;
+ }
+
+ val = div_s64(val - b, m);
+ return clamp_val(val, LONG_MIN, LONG_MAX);
+}
+
+/*
+ * Convert VID sensor values to milli- or micro-units
+ * depending on sensor type.
+ */
+static long pmbus_reg2data_vid(struct pmbus_data *data,
+ struct pmbus_sensor *sensor)
+{
+ long val = sensor->data;
+ long rv = 0;
+
+ switch (data->info->vrm_version) {
+ case vr11:
+ if (val >= 0x02 && val <= 0xb2)
+ rv = DIV_ROUND_CLOSEST(160000 - (val - 2) * 625, 100);
+ break;
+ case vr12:
+ if (val >= 0x01)
+ rv = 250 + (val - 1) * 5;
+ break;
+ case vr13:
+ if (val >= 0x01)
+ rv = 500 + (val - 1) * 10;
+ break;
+ }
+ return rv;
+}
+
+static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
+{
+ long val;
+
+ if (!sensor->convert)
+ return sensor->data;
+
+ switch (data->info->format[sensor->class]) {
+ case direct:
+ val = pmbus_reg2data_direct(data, sensor);
+ break;
+ case vid:
+ val = pmbus_reg2data_vid(data, sensor);
+ break;
+ case linear:
+ default:
+ val = pmbus_reg2data_linear(data, sensor);
+ break;
+ }
+ return val;
+}
+
+#define MAX_MANTISSA (1023 * 1000)
+#define MIN_MANTISSA (511 * 1000)
+
+static u16 pmbus_data2reg_linear(struct pmbus_data *data,
+ struct pmbus_sensor *sensor, long val)
+{
+ s16 exponent = 0, mantissa;
+ bool negative = false;
+
+ /* simple case */
+ if (val == 0)
+ return 0;
+
+ if (sensor->class == PSC_VOLTAGE_OUT) {
+ /* LINEAR16 does not support negative voltages */
+ if (val < 0)
+ return 0;
+
+ /*
+ * For a static exponents, we don't have a choice
+ * but to adjust the value to it.
+ */
+ if (data->exponent[sensor->page] < 0)
+ val <<= -data->exponent[sensor->page];
+ else
+ val >>= data->exponent[sensor->page];
+ val = DIV_ROUND_CLOSEST(val, 1000);
+ return val & 0xffff;
+ }
+
+ if (val < 0) {
+ negative = true;
+ val = -val;
+ }
+
+ /* Power is in uW. Convert to mW before converting. */
+ if (sensor->class == PSC_POWER)
+ val = DIV_ROUND_CLOSEST(val, 1000L);
+
+ /*
+ * For simplicity, convert fan data to milli-units
+ * before calculating the exponent.
+ */
+ if (sensor->class == PSC_FAN)
+ val = val * 1000;
+
+ /* Reduce large mantissa until it fits into 10 bit */
+ while (val >= MAX_MANTISSA && exponent < 15) {
+ exponent++;
+ val >>= 1;
+ }
+ /* Increase small mantissa to improve precision */
+ while (val < MIN_MANTISSA && exponent > -15) {
+ exponent--;
+ val <<= 1;
+ }
+
+ /* Convert mantissa from milli-units to units */
+ mantissa = DIV_ROUND_CLOSEST(val, 1000);
+
+ /* Ensure that resulting number is within range */
+ if (mantissa > 0x3ff)
+ mantissa = 0x3ff;
+
+ /* restore sign */
+ if (negative)
+ mantissa = -mantissa;
+
+ /* Convert to 5 bit exponent, 11 bit mantissa */
+ return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
+}
+
+static u16 pmbus_data2reg_direct(struct pmbus_data *data,
+ struct pmbus_sensor *sensor, long val)
+{
+ s64 b, val64 = val;
+ s32 m, R;
+
+ m = data->info->m[sensor->class];
+ b = data->info->b[sensor->class];
+ R = data->info->R[sensor->class];
+
+ /* Power is in uW. Adjust R and b. */
+ if (sensor->class == PSC_POWER) {
+ R -= 3;
+ b *= 1000;
+ }
+
+ /* Calculate Y = (m * X + b) * 10^R */
+ if (!(sensor->class == PSC_FAN || sensor->class == PSC_PWM)) {
+ R -= 3; /* Adjust R and b for data in milli-units */
+ b *= 1000;
+ }
+ val64 = val64 * m + b;
+
+ while (R > 0) {
+ val64 *= 10;
+ R--;
+ }
+ while (R < 0) {
+ val64 = div_s64(val64 + 5LL, 10L); /* round closest */
+ R++;
+ }
+
+ return (u16)clamp_val(val64, S16_MIN, S16_MAX);
+}
+
+static u16 pmbus_data2reg_vid(struct pmbus_data *data,
+ struct pmbus_sensor *sensor, long val)
+{
+ val = clamp_val(val, 500, 1600);
+
+ return 2 + DIV_ROUND_CLOSEST((1600 - val) * 100, 625);
+}
+
+static u16 pmbus_data2reg(struct pmbus_data *data,
+ struct pmbus_sensor *sensor, long val)
+{
+ u16 regval;
+
+ if (!sensor->convert)
+ return val;
+
+ switch (data->info->format[sensor->class]) {
+ case direct:
+ regval = pmbus_data2reg_direct(data, sensor, val);
+ break;
+ case vid:
+ regval = pmbus_data2reg_vid(data, sensor, val);
+ break;
+ case linear:
+ default:
+ regval = pmbus_data2reg_linear(data, sensor, val);
+ break;
+ }
+ return regval;
+}
+
+/*
+ * Return boolean calculated from converted data.
+ * <index> defines a status register index and mask.
+ * The mask is in the lower 8 bits, the register index is in bits 8..23.
+ *
+ * The associated pmbus_boolean structure contains optional pointers to two
+ * sensor attributes. If specified, those attributes are compared against each
+ * other to determine if a limit has been exceeded.
+ *
+ * If the sensor attribute pointers are NULL, the function returns true if
+ * (status[reg] & mask) is true.
+ *
+ * If sensor attribute pointers are provided, a comparison against a specified
+ * limit has to be performed to determine the boolean result.
+ * In this case, the function returns true if v1 >= v2 (where v1 and v2 are
+ * sensor values referenced by sensor attribute pointers s1 and s2).
+ *
+ * To determine if an object exceeds upper limits, specify <s1,s2> = <v,limit>.
+ * To determine if an object exceeds lower limits, specify <s1,s2> = <limit,v>.
+ *
+ * If a negative value is stored in any of the referenced registers, this value
+ * reflects an error code which will be returned.
+ */
+static int pmbus_get_boolean(struct pmbus_data *data, struct pmbus_boolean *b,
+ int index)
+{
+ struct pmbus_sensor *s1 = b->s1;
+ struct pmbus_sensor *s2 = b->s2;
+ u16 reg = (index >> 16) & 0xffff;
+ u16 mask = index & 0xffff;
+ int ret, status;
+ u16 regval;
+
+ status = data->status[reg];
+ if (status < 0)
+ return status;
+
+ regval = status & mask;
+ if (!s1 && !s2) {
+ ret = !!regval;
+ } else if (!s1 || !s2) {
+ WARN(1, "Bad boolean descriptor %p: s1=%p, s2=%p\n", b, s1, s2);
+ return 0;
+ } else {
+ long v1, v2;
+
+ if (s1->data < 0)
+ return s1->data;
+ if (s2->data < 0)
+ return s2->data;
+
+ v1 = pmbus_reg2data(data, s1);
+ v2 = pmbus_reg2data(data, s2);
+ ret = !!(regval && v1 >= v2);
+ }
+ return ret;
+}
+
+static ssize_t pmbus_show_boolean(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct pmbus_boolean *boolean = to_pmbus_boolean(attr);
+ struct pmbus_data *data = pmbus_update_device(dev);
+ int val;
+
+ val = pmbus_get_boolean(data, boolean, attr->index);
+ if (val < 0)
+ return val;
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t pmbus_show_sensor(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct pmbus_data *data = pmbus_update_device(dev);
+ struct pmbus_sensor *sensor = to_pmbus_sensor(devattr);
+
+ if (sensor->data < 0)
+ return sensor->data;
+
+ return snprintf(buf, PAGE_SIZE, "%ld\n", pmbus_reg2data(data, sensor));
+}
+
+static ssize_t pmbus_set_sensor(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ struct pmbus_sensor *sensor = to_pmbus_sensor(devattr);
+ ssize_t rv = count;
+ long val = 0;
+ int ret;
+ u16 regval;
+
+ if (kstrtol(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ regval = pmbus_data2reg(data, sensor, val);
+ ret = _pmbus_write_word_data(client, sensor->page, sensor->reg, regval);
+ if (ret < 0)
+ rv = ret;
+ else
+ sensor->data = regval;
+ mutex_unlock(&data->update_lock);
+ return rv;
+}
+
+static ssize_t pmbus_show_label(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct pmbus_label *label = to_pmbus_label(da);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", label->label);
+}
+
+static int pmbus_add_attribute(struct pmbus_data *data, struct attribute *attr)
+{
+ if (data->num_attributes >= data->max_attributes - 1) {
+ int new_max_attrs = data->max_attributes + PMBUS_ATTR_ALLOC_SIZE;
+ void *new_attrs = krealloc(data->group.attrs,
+ new_max_attrs * sizeof(void *),
+ GFP_KERNEL);
+ if (!new_attrs)
+ return -ENOMEM;
+ data->group.attrs = new_attrs;
+ data->max_attributes = new_max_attrs;
+ }
+
+ data->group.attrs[data->num_attributes++] = attr;
+ data->group.attrs[data->num_attributes] = NULL;
+ return 0;
+}
+
+static void pmbus_dev_attr_init(struct device_attribute *dev_attr,
+ const char *name,
+ umode_t mode,
+ ssize_t (*show)(struct device *dev,
+ struct device_attribute *attr,
+ char *buf),
+ ssize_t (*store)(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count))
+{
+ sysfs_attr_init(&dev_attr->attr);
+ dev_attr->attr.name = name;
+ dev_attr->attr.mode = mode;
+ dev_attr->show = show;
+ dev_attr->store = store;
+}
+
+static void pmbus_attr_init(struct sensor_device_attribute *a,
+ const char *name,
+ umode_t mode,
+ ssize_t (*show)(struct device *dev,
+ struct device_attribute *attr,
+ char *buf),
+ ssize_t (*store)(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count),
+ int idx)
+{
+ pmbus_dev_attr_init(&a->dev_attr, name, mode, show, store);
+ a->index = idx;
+}
+
+static int pmbus_add_boolean(struct pmbus_data *data,
+ const char *name, const char *type, int seq,
+ struct pmbus_sensor *s1,
+ struct pmbus_sensor *s2,
+ u16 reg, u16 mask)
+{
+ struct pmbus_boolean *boolean;
+ struct sensor_device_attribute *a;
+
+ boolean = devm_kzalloc(data->dev, sizeof(*boolean), GFP_KERNEL);
+ if (!boolean)
+ return -ENOMEM;
+
+ a = &boolean->attribute;
+
+ snprintf(boolean->name, sizeof(boolean->name), "%s%d_%s",
+ name, seq, type);
+ boolean->s1 = s1;
+ boolean->s2 = s2;
+ pmbus_attr_init(a, boolean->name, S_IRUGO, pmbus_show_boolean, NULL,
+ (reg << 16) | mask);
+
+ return pmbus_add_attribute(data, &a->dev_attr.attr);
+}
+
+static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data,
+ const char *name, const char *type,
+ int seq, int page, int reg,
+ enum pmbus_sensor_classes class,
+ bool update, bool readonly,
+ bool convert)
+{
+ struct pmbus_sensor *sensor;
+ struct device_attribute *a;
+
+ sensor = devm_kzalloc(data->dev, sizeof(*sensor), GFP_KERNEL);
+ if (!sensor)
+ return NULL;
+ a = &sensor->attribute;
+
+ if (type)
+ snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s",
+ name, seq, type);
+ else
+ snprintf(sensor->name, sizeof(sensor->name), "%s%d",
+ name, seq);
+
+ sensor->page = page;
+ sensor->reg = reg;
+ sensor->class = class;
+ sensor->update = update;
+ sensor->convert = convert;
+ pmbus_dev_attr_init(a, sensor->name,
+ readonly ? S_IRUGO : S_IRUGO | S_IWUSR,
+ pmbus_show_sensor, pmbus_set_sensor);
+
+ if (pmbus_add_attribute(data, &a->attr))
+ return NULL;
+
+ sensor->next = data->sensors;
+ data->sensors = sensor;
+
+ return sensor;
+}
+
+static int pmbus_add_label(struct pmbus_data *data,
+ const char *name, int seq,
+ const char *lstring, int index)
+{
+ struct pmbus_label *label;
+ struct device_attribute *a;
+
+ label = devm_kzalloc(data->dev, sizeof(*label), GFP_KERNEL);
+ if (!label)
+ return -ENOMEM;
+
+ a = &label->attribute;
+
+ snprintf(label->name, sizeof(label->name), "%s%d_label", name, seq);
+ if (!index)
+ strncpy(label->label, lstring, sizeof(label->label) - 1);
+ else
+ snprintf(label->label, sizeof(label->label), "%s%d", lstring,
+ index);
+
+ pmbus_dev_attr_init(a, label->name, S_IRUGO, pmbus_show_label, NULL);
+ return pmbus_add_attribute(data, &a->attr);
+}
+
+/*
+ * Search for attributes. Allocate sensors, booleans, and labels as needed.
+ */
+
+/*
+ * The pmbus_limit_attr structure describes a single limit attribute
+ * and its associated alarm attribute.
+ */
+struct pmbus_limit_attr {
+ u16 reg; /* Limit register */
+ u16 sbit; /* Alarm attribute status bit */
+ bool update; /* True if register needs updates */
+ bool low; /* True if low limit; for limits with compare
+ functions only */
+ const char *attr; /* Attribute name */
+ const char *alarm; /* Alarm attribute name */
+};
+
+/*
+ * The pmbus_sensor_attr structure describes one sensor attribute. This
+ * description includes a reference to the associated limit attributes.
+ */
+struct pmbus_sensor_attr {
+ u16 reg; /* sensor register */
+ u16 gbit; /* generic status bit */
+ u8 nlimit; /* # of limit registers */
+ enum pmbus_sensor_classes class;/* sensor class */
+ const char *label; /* sensor label */
+ bool paged; /* true if paged sensor */
+ bool update; /* true if update needed */
+ bool compare; /* true if compare function needed */
+ u32 func; /* sensor mask */
+ u32 sfunc; /* sensor status mask */
+ int sbase; /* status base register */
+ const struct pmbus_limit_attr *limit;/* limit registers */
+};
+
+/*
+ * Add a set of limit attributes and, if supported, the associated
+ * alarm attributes.
+ * returns 0 if no alarm register found, 1 if an alarm register was found,
+ * < 0 on errors.
+ */
+static int pmbus_add_limit_attrs(struct i2c_client *client,
+ struct pmbus_data *data,
+ const struct pmbus_driver_info *info,
+ const char *name, int index, int page,
+ struct pmbus_sensor *base,
+ const struct pmbus_sensor_attr *attr)
+{
+ const struct pmbus_limit_attr *l = attr->limit;
+ int nlimit = attr->nlimit;
+ int have_alarm = 0;
+ int i, ret;
+ struct pmbus_sensor *curr;
+
+ for (i = 0; i < nlimit; i++) {
+ if (pmbus_check_word_register(client, page, l->reg)) {
+ curr = pmbus_add_sensor(data, name, l->attr, index,
+ page, l->reg, attr->class,
+ attr->update || l->update,
+ false, true);
+ if (!curr)
+ return -ENOMEM;
+ if (l->sbit && (info->func[page] & attr->sfunc)) {
+ ret = pmbus_add_boolean(data, name,
+ l->alarm, index,
+ attr->compare ? l->low ? curr : base
+ : NULL,
+ attr->compare ? l->low ? base : curr
+ : NULL,
+ attr->sbase + page, l->sbit);
+ if (ret)
+ return ret;
+ have_alarm = 1;
+ }
+ }
+ l++;
+ }
+ return have_alarm;
+}
+
+static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
+ struct pmbus_data *data,
+ const struct pmbus_driver_info *info,
+ const char *name,
+ int index, int page,
+ const struct pmbus_sensor_attr *attr,
+ bool paged)
+{
+ struct pmbus_sensor *base;
+ bool upper = !!(attr->gbit & 0xff00); /* need to check STATUS_WORD */
+ int ret;
+
+ if (attr->label) {
+ ret = pmbus_add_label(data, name, index, attr->label,
+ paged ? page + 1 : 0);
+ if (ret)
+ return ret;
+ }
+ base = pmbus_add_sensor(data, name, "input", index, page, attr->reg,
+ attr->class, true, true, true);
+ if (!base)
+ return -ENOMEM;
+ if (attr->sfunc) {
+ ret = pmbus_add_limit_attrs(client, data, info, name,
+ index, page, base, attr);
+ if (ret < 0)
+ return ret;
+ /*
+ * Add generic alarm attribute only if there are no individual
+ * alarm attributes, if there is a global alarm bit, and if
+ * the generic status register (word or byte, depending on
+ * which global bit is set) for this page is accessible.
+ */
+ if (!ret && attr->gbit &&
+ (!upper || (upper && data->has_status_word)) &&
+ pmbus_check_status_register(client, page)) {
+ ret = pmbus_add_boolean(data, name, "alarm", index,
+ NULL, NULL,
+ PB_STATUS_BASE + page,
+ attr->gbit);
+ if (ret)
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static bool pmbus_sensor_is_paged(const struct pmbus_driver_info *info,
+ const struct pmbus_sensor_attr *attr)
+{
+ int p;
+
+ if (attr->paged)
+ return true;
+
+ /*
+ * Some attributes may be present on more than one page despite
+ * not being marked with the paged attribute. If that is the case,
+ * then treat the sensor as being paged and add the page suffix to the
+ * attribute name.
+ * We don't just add the paged attribute to all such attributes, in
+ * order to maintain the un-suffixed labels in the case where the
+ * attribute is only on page 0.
+ */
+ for (p = 1; p < info->pages; p++) {
+ if (info->func[p] & attr->func)
+ return true;
+ }
+ return false;
+}
+
+static int pmbus_add_sensor_attrs(struct i2c_client *client,
+ struct pmbus_data *data,
+ const char *name,
+ const struct pmbus_sensor_attr *attrs,
+ int nattrs)
+{
+ const struct pmbus_driver_info *info = data->info;
+ int index, i;
+ int ret;
+
+ index = 1;
+ for (i = 0; i < nattrs; i++) {
+ int page, pages;
+ bool paged = pmbus_sensor_is_paged(info, attrs);
+
+ pages = paged ? info->pages : 1;
+ for (page = 0; page < pages; page++) {
+ if (!(info->func[page] & attrs->func))
+ continue;
+ ret = pmbus_add_sensor_attrs_one(client, data, info,
+ name, index, page,
+ attrs, paged);
+ if (ret)
+ return ret;
+ index++;
+ }
+ attrs++;
+ }
+ return 0;
+}
+
+static const struct pmbus_limit_attr vin_limit_attrs[] = {
+ {
+ .reg = PMBUS_VIN_UV_WARN_LIMIT,
+ .attr = "min",
+ .alarm = "min_alarm",
+ .sbit = PB_VOLTAGE_UV_WARNING,
+ }, {
+ .reg = PMBUS_VIN_UV_FAULT_LIMIT,
+ .attr = "lcrit",
+ .alarm = "lcrit_alarm",
+ .sbit = PB_VOLTAGE_UV_FAULT | PB_VOLTAGE_VIN_OFF,
+ }, {
+ .reg = PMBUS_VIN_OV_WARN_LIMIT,
+ .attr = "max",
+ .alarm = "max_alarm",
+ .sbit = PB_VOLTAGE_OV_WARNING,
+ }, {
+ .reg = PMBUS_VIN_OV_FAULT_LIMIT,
+ .attr = "crit",
+ .alarm = "crit_alarm",
+ .sbit = PB_VOLTAGE_OV_FAULT,
+ }, {
+ .reg = PMBUS_VIRT_READ_VIN_AVG,
+ .update = true,
+ .attr = "average",
+ }, {
+ .reg = PMBUS_VIRT_READ_VIN_MIN,
+ .update = true,
+ .attr = "lowest",
+ }, {
+ .reg = PMBUS_VIRT_READ_VIN_MAX,
+ .update = true,
+ .attr = "highest",
+ }, {
+ .reg = PMBUS_VIRT_RESET_VIN_HISTORY,
+ .attr = "reset_history",
+ },
+};
+
+static const struct pmbus_limit_attr vmon_limit_attrs[] = {
+ {
+ .reg = PMBUS_VIRT_VMON_UV_WARN_LIMIT,
+ .attr = "min",
+ .alarm = "min_alarm",
+ .sbit = PB_VOLTAGE_UV_WARNING,
+ }, {
+ .reg = PMBUS_VIRT_VMON_UV_FAULT_LIMIT,
+ .attr = "lcrit",
+ .alarm = "lcrit_alarm",
+ .sbit = PB_VOLTAGE_UV_FAULT,
+ }, {
+ .reg = PMBUS_VIRT_VMON_OV_WARN_LIMIT,
+ .attr = "max",
+ .alarm = "max_alarm",
+ .sbit = PB_VOLTAGE_OV_WARNING,
+ }, {
+ .reg = PMBUS_VIRT_VMON_OV_FAULT_LIMIT,
+ .attr = "crit",
+ .alarm = "crit_alarm",
+ .sbit = PB_VOLTAGE_OV_FAULT,
+ }
+};
+
+static const struct pmbus_limit_attr vout_limit_attrs[] = {
+ {
+ .reg = PMBUS_VOUT_UV_WARN_LIMIT,
+ .attr = "min",
+ .alarm = "min_alarm",
+ .sbit = PB_VOLTAGE_UV_WARNING,
+ }, {
+ .reg = PMBUS_VOUT_UV_FAULT_LIMIT,
+ .attr = "lcrit",
+ .alarm = "lcrit_alarm",
+ .sbit = PB_VOLTAGE_UV_FAULT,
+ }, {
+ .reg = PMBUS_VOUT_OV_WARN_LIMIT,
+ .attr = "max",
+ .alarm = "max_alarm",
+ .sbit = PB_VOLTAGE_OV_WARNING,
+ }, {
+ .reg = PMBUS_VOUT_OV_FAULT_LIMIT,
+ .attr = "crit",
+ .alarm = "crit_alarm",
+ .sbit = PB_VOLTAGE_OV_FAULT,
+ }, {
+ .reg = PMBUS_VIRT_READ_VOUT_AVG,
+ .update = true,
+ .attr = "average",
+ }, {
+ .reg = PMBUS_VIRT_READ_VOUT_MIN,
+ .update = true,
+ .attr = "lowest",
+ }, {
+ .reg = PMBUS_VIRT_READ_VOUT_MAX,
+ .update = true,
+ .attr = "highest",
+ }, {
+ .reg = PMBUS_VIRT_RESET_VOUT_HISTORY,
+ .attr = "reset_history",
+ }
+};
+
+static const struct pmbus_sensor_attr voltage_attributes[] = {
+ {
+ .reg = PMBUS_READ_VIN,
+ .class = PSC_VOLTAGE_IN,
+ .label = "vin",
+ .func = PMBUS_HAVE_VIN,
+ .sfunc = PMBUS_HAVE_STATUS_INPUT,
+ .sbase = PB_STATUS_INPUT_BASE,
+ .gbit = PB_STATUS_VIN_UV,
+ .limit = vin_limit_attrs,
+ .nlimit = ARRAY_SIZE(vin_limit_attrs),
+ }, {
+ .reg = PMBUS_VIRT_READ_VMON,
+ .class = PSC_VOLTAGE_IN,
+ .label = "vmon",
+ .func = PMBUS_HAVE_VMON,
+ .sfunc = PMBUS_HAVE_STATUS_VMON,
+ .sbase = PB_STATUS_VMON_BASE,
+ .limit = vmon_limit_attrs,
+ .nlimit = ARRAY_SIZE(vmon_limit_attrs),
+ }, {
+ .reg = PMBUS_READ_VCAP,
+ .class = PSC_VOLTAGE_IN,
+ .label = "vcap",
+ .func = PMBUS_HAVE_VCAP,
+ }, {
+ .reg = PMBUS_READ_VOUT,
+ .class = PSC_VOLTAGE_OUT,
+ .label = "vout",
+ .paged = true,
+ .func = PMBUS_HAVE_VOUT,
+ .sfunc = PMBUS_HAVE_STATUS_VOUT,
+ .sbase = PB_STATUS_VOUT_BASE,
+ .gbit = PB_STATUS_VOUT_OV,
+ .limit = vout_limit_attrs,
+ .nlimit = ARRAY_SIZE(vout_limit_attrs),
+ }
+};
+
+/* Current attributes */
+
+static const struct pmbus_limit_attr iin_limit_attrs[] = {
+ {
+ .reg = PMBUS_IIN_OC_WARN_LIMIT,
+ .attr = "max",
+ .alarm = "max_alarm",
+ .sbit = PB_IIN_OC_WARNING,
+ }, {
+ .reg = PMBUS_IIN_OC_FAULT_LIMIT,
+ .attr = "crit",
+ .alarm = "crit_alarm",
+ .sbit = PB_IIN_OC_FAULT,
+ }, {
+ .reg = PMBUS_VIRT_READ_IIN_AVG,
+ .update = true,
+ .attr = "average",
+ }, {
+ .reg = PMBUS_VIRT_READ_IIN_MIN,
+ .update = true,
+ .attr = "lowest",
+ }, {
+ .reg = PMBUS_VIRT_READ_IIN_MAX,
+ .update = true,
+ .attr = "highest",
+ }, {
+ .reg = PMBUS_VIRT_RESET_IIN_HISTORY,
+ .attr = "reset_history",
+ }
+};
+
+static const struct pmbus_limit_attr iout_limit_attrs[] = {
+ {
+ .reg = PMBUS_IOUT_OC_WARN_LIMIT,
+ .attr = "max",
+ .alarm = "max_alarm",
+ .sbit = PB_IOUT_OC_WARNING,
+ }, {
+ .reg = PMBUS_IOUT_UC_FAULT_LIMIT,
+ .attr = "lcrit",
+ .alarm = "lcrit_alarm",
+ .sbit = PB_IOUT_UC_FAULT,
+ }, {
+ .reg = PMBUS_IOUT_OC_FAULT_LIMIT,
+ .attr = "crit",
+ .alarm = "crit_alarm",
+ .sbit = PB_IOUT_OC_FAULT,
+ }, {
+ .reg = PMBUS_VIRT_READ_IOUT_AVG,
+ .update = true,
+ .attr = "average",
+ }, {
+ .reg = PMBUS_VIRT_READ_IOUT_MIN,
+ .update = true,
+ .attr = "lowest",
+ }, {
+ .reg = PMBUS_VIRT_READ_IOUT_MAX,
+ .update = true,
+ .attr = "highest",
+ }, {
+ .reg = PMBUS_VIRT_RESET_IOUT_HISTORY,
+ .attr = "reset_history",
+ }
+};
+
+static const struct pmbus_sensor_attr current_attributes[] = {
+ {
+ .reg = PMBUS_READ_IIN,
+ .class = PSC_CURRENT_IN,
+ .label = "iin",
+ .func = PMBUS_HAVE_IIN,
+ .sfunc = PMBUS_HAVE_STATUS_INPUT,
+ .sbase = PB_STATUS_INPUT_BASE,
+ .gbit = PB_STATUS_INPUT,
+ .limit = iin_limit_attrs,
+ .nlimit = ARRAY_SIZE(iin_limit_attrs),
+ }, {
+ .reg = PMBUS_READ_IOUT,
+ .class = PSC_CURRENT_OUT,
+ .label = "iout",
+ .paged = true,
+ .func = PMBUS_HAVE_IOUT,
+ .sfunc = PMBUS_HAVE_STATUS_IOUT,
+ .sbase = PB_STATUS_IOUT_BASE,
+ .gbit = PB_STATUS_IOUT_OC,
+ .limit = iout_limit_attrs,
+ .nlimit = ARRAY_SIZE(iout_limit_attrs),
+ }
+};
+
+/* Power attributes */
+
+static const struct pmbus_limit_attr pin_limit_attrs[] = {
+ {
+ .reg = PMBUS_PIN_OP_WARN_LIMIT,
+ .attr = "max",
+ .alarm = "alarm",
+ .sbit = PB_PIN_OP_WARNING,
+ }, {
+ .reg = PMBUS_VIRT_READ_PIN_AVG,
+ .update = true,
+ .attr = "average",
+ }, {
+ .reg = PMBUS_VIRT_READ_PIN_MIN,
+ .update = true,
+ .attr = "input_lowest",
+ }, {
+ .reg = PMBUS_VIRT_READ_PIN_MAX,
+ .update = true,
+ .attr = "input_highest",
+ }, {
+ .reg = PMBUS_VIRT_RESET_PIN_HISTORY,
+ .attr = "reset_history",
+ }
+};
+
+static const struct pmbus_limit_attr pout_limit_attrs[] = {
+ {
+ .reg = PMBUS_POUT_MAX,
+ .attr = "cap",
+ .alarm = "cap_alarm",
+ .sbit = PB_POWER_LIMITING,
+ }, {
+ .reg = PMBUS_POUT_OP_WARN_LIMIT,
+ .attr = "max",
+ .alarm = "max_alarm",
+ .sbit = PB_POUT_OP_WARNING,
+ }, {
+ .reg = PMBUS_POUT_OP_FAULT_LIMIT,
+ .attr = "crit",
+ .alarm = "crit_alarm",
+ .sbit = PB_POUT_OP_FAULT,
+ }, {
+ .reg = PMBUS_VIRT_READ_POUT_AVG,
+ .update = true,
+ .attr = "average",
+ }, {
+ .reg = PMBUS_VIRT_READ_POUT_MIN,
+ .update = true,
+ .attr = "input_lowest",
+ }, {
+ .reg = PMBUS_VIRT_READ_POUT_MAX,
+ .update = true,
+ .attr = "input_highest",
+ }, {
+ .reg = PMBUS_VIRT_RESET_POUT_HISTORY,
+ .attr = "reset_history",
+ }
+};
+
+static const struct pmbus_sensor_attr power_attributes[] = {
+ {
+ .reg = PMBUS_READ_PIN,
+ .class = PSC_POWER,
+ .label = "pin",
+ .func = PMBUS_HAVE_PIN,
+ .sfunc = PMBUS_HAVE_STATUS_INPUT,
+ .sbase = PB_STATUS_INPUT_BASE,
+ .gbit = PB_STATUS_INPUT,
+ .limit = pin_limit_attrs,
+ .nlimit = ARRAY_SIZE(pin_limit_attrs),
+ }, {
+ .reg = PMBUS_READ_POUT,
+ .class = PSC_POWER,
+ .label = "pout",
+ .paged = true,
+ .func = PMBUS_HAVE_POUT,
+ .sfunc = PMBUS_HAVE_STATUS_IOUT,
+ .sbase = PB_STATUS_IOUT_BASE,
+ .limit = pout_limit_attrs,
+ .nlimit = ARRAY_SIZE(pout_limit_attrs),
+ }
+};
+
+/* Temperature atributes */
+
+static const struct pmbus_limit_attr temp_limit_attrs[] = {
+ {
+ .reg = PMBUS_UT_WARN_LIMIT,
+ .low = true,
+ .attr = "min",
+ .alarm = "min_alarm",
+ .sbit = PB_TEMP_UT_WARNING,
+ }, {
+ .reg = PMBUS_UT_FAULT_LIMIT,
+ .low = true,
+ .attr = "lcrit",
+ .alarm = "lcrit_alarm",
+ .sbit = PB_TEMP_UT_FAULT,
+ }, {
+ .reg = PMBUS_OT_WARN_LIMIT,
+ .attr = "max",
+ .alarm = "max_alarm",
+ .sbit = PB_TEMP_OT_WARNING,
+ }, {
+ .reg = PMBUS_OT_FAULT_LIMIT,
+ .attr = "crit",
+ .alarm = "crit_alarm",
+ .sbit = PB_TEMP_OT_FAULT,
+ }, {
+ .reg = PMBUS_VIRT_READ_TEMP_MIN,
+ .attr = "lowest",
+ }, {
+ .reg = PMBUS_VIRT_READ_TEMP_AVG,
+ .attr = "average",
+ }, {
+ .reg = PMBUS_VIRT_READ_TEMP_MAX,
+ .attr = "highest",
+ }, {
+ .reg = PMBUS_VIRT_RESET_TEMP_HISTORY,
+ .attr = "reset_history",
+ }
+};
+
+static const struct pmbus_limit_attr temp_limit_attrs2[] = {
+ {
+ .reg = PMBUS_UT_WARN_LIMIT,
+ .low = true,
+ .attr = "min",
+ .alarm = "min_alarm",
+ .sbit = PB_TEMP_UT_WARNING,
+ }, {
+ .reg = PMBUS_UT_FAULT_LIMIT,
+ .low = true,
+ .attr = "lcrit",
+ .alarm = "lcrit_alarm",
+ .sbit = PB_TEMP_UT_FAULT,
+ }, {
+ .reg = PMBUS_OT_WARN_LIMIT,
+ .attr = "max",
+ .alarm = "max_alarm",
+ .sbit = PB_TEMP_OT_WARNING,
+ }, {
+ .reg = PMBUS_OT_FAULT_LIMIT,
+ .attr = "crit",
+ .alarm = "crit_alarm",
+ .sbit = PB_TEMP_OT_FAULT,
+ }, {
+ .reg = PMBUS_VIRT_READ_TEMP2_MIN,
+ .attr = "lowest",
+ }, {
+ .reg = PMBUS_VIRT_READ_TEMP2_AVG,
+ .attr = "average",
+ }, {
+ .reg = PMBUS_VIRT_READ_TEMP2_MAX,
+ .attr = "highest",
+ }, {
+ .reg = PMBUS_VIRT_RESET_TEMP2_HISTORY,
+ .attr = "reset_history",
+ }
+};
+
+static const struct pmbus_limit_attr temp_limit_attrs3[] = {
+ {
+ .reg = PMBUS_UT_WARN_LIMIT,
+ .low = true,
+ .attr = "min",
+ .alarm = "min_alarm",
+ .sbit = PB_TEMP_UT_WARNING,
+ }, {
+ .reg = PMBUS_UT_FAULT_LIMIT,
+ .low = true,
+ .attr = "lcrit",
+ .alarm = "lcrit_alarm",
+ .sbit = PB_TEMP_UT_FAULT,
+ }, {
+ .reg = PMBUS_OT_WARN_LIMIT,
+ .attr = "max",
+ .alarm = "max_alarm",
+ .sbit = PB_TEMP_OT_WARNING,
+ }, {
+ .reg = PMBUS_OT_FAULT_LIMIT,
+ .attr = "crit",
+ .alarm = "crit_alarm",
+ .sbit = PB_TEMP_OT_FAULT,
+ }
+};
+
+static const struct pmbus_sensor_attr temp_attributes[] = {
+ {
+ .reg = PMBUS_READ_TEMPERATURE_1,
+ .class = PSC_TEMPERATURE,
+ .paged = true,
+ .update = true,
+ .compare = true,
+ .func = PMBUS_HAVE_TEMP,
+ .sfunc = PMBUS_HAVE_STATUS_TEMP,
+ .sbase = PB_STATUS_TEMP_BASE,
+ .gbit = PB_STATUS_TEMPERATURE,
+ .limit = temp_limit_attrs,
+ .nlimit = ARRAY_SIZE(temp_limit_attrs),
+ }, {
+ .reg = PMBUS_READ_TEMPERATURE_2,
+ .class = PSC_TEMPERATURE,
+ .paged = true,
+ .update = true,
+ .compare = true,
+ .func = PMBUS_HAVE_TEMP2,
+ .sfunc = PMBUS_HAVE_STATUS_TEMP,
+ .sbase = PB_STATUS_TEMP_BASE,
+ .gbit = PB_STATUS_TEMPERATURE,
+ .limit = temp_limit_attrs2,
+ .nlimit = ARRAY_SIZE(temp_limit_attrs2),
+ }, {
+ .reg = PMBUS_READ_TEMPERATURE_3,
+ .class = PSC_TEMPERATURE,
+ .paged = true,
+ .update = true,
+ .compare = true,
+ .func = PMBUS_HAVE_TEMP3,
+ .sfunc = PMBUS_HAVE_STATUS_TEMP,
+ .sbase = PB_STATUS_TEMP_BASE,
+ .gbit = PB_STATUS_TEMPERATURE,
+ .limit = temp_limit_attrs3,
+ .nlimit = ARRAY_SIZE(temp_limit_attrs3),
+ }
+};
+
+static const int pmbus_fan_registers[] = {
+ PMBUS_READ_FAN_SPEED_1,
+ PMBUS_READ_FAN_SPEED_2,
+ PMBUS_READ_FAN_SPEED_3,
+ PMBUS_READ_FAN_SPEED_4
+};
+
+static const int pmbus_fan_status_registers[] = {
+ PMBUS_STATUS_FAN_12,
+ PMBUS_STATUS_FAN_12,
+ PMBUS_STATUS_FAN_34,
+ PMBUS_STATUS_FAN_34
+};
+
+static const u32 pmbus_fan_flags[] = {
+ PMBUS_HAVE_FAN12,
+ PMBUS_HAVE_FAN12,
+ PMBUS_HAVE_FAN34,
+ PMBUS_HAVE_FAN34
+};
+
+static const u32 pmbus_fan_status_flags[] = {
+ PMBUS_HAVE_STATUS_FAN12,
+ PMBUS_HAVE_STATUS_FAN12,
+ PMBUS_HAVE_STATUS_FAN34,
+ PMBUS_HAVE_STATUS_FAN34
+};
+
+/* Fans */
+
+/* Precondition: FAN_CONFIG_x_y and FAN_COMMAND_x must exist for the fan ID */
+static int pmbus_add_fan_ctrl(struct i2c_client *client,
+ struct pmbus_data *data, int index, int page, int id,
+ u8 config)
+{
+ struct pmbus_sensor *sensor;
+
+ sensor = pmbus_add_sensor(data, "fan", "target", index, page,
+ PMBUS_VIRT_FAN_TARGET_1 + id, PSC_FAN,
+ false, false, true);
+
+ if (!sensor)
+ return -ENOMEM;
+
+ if (!((data->info->func[page] & PMBUS_HAVE_PWM12) ||
+ (data->info->func[page] & PMBUS_HAVE_PWM34)))
+ return 0;
+
+ sensor = pmbus_add_sensor(data, "pwm", NULL, index, page,
+ PMBUS_VIRT_PWM_1 + id, PSC_PWM,
+ false, false, true);
+
+ if (!sensor)
+ return -ENOMEM;
+
+ sensor = pmbus_add_sensor(data, "pwm", "enable", index, page,
+ PMBUS_VIRT_PWM_ENABLE_1 + id, PSC_PWM,
+ true, false, false);
+
+ if (!sensor)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int pmbus_add_fan_attributes(struct i2c_client *client,
+ struct pmbus_data *data)
+{
+ const struct pmbus_driver_info *info = data->info;
+ int index = 1;
+ int page;
+ int ret;
+
+ for (page = 0; page < info->pages; page++) {
+ int f;
+
+ for (f = 0; f < ARRAY_SIZE(pmbus_fan_registers); f++) {
+ int regval;
+
+ if (!(info->func[page] & pmbus_fan_flags[f]))
+ break;
+
+ if (!pmbus_check_word_register(client, page,
+ pmbus_fan_registers[f]))
+ break;
+
+ /*
+ * Skip fan if not installed.
+ * Each fan configuration register covers multiple fans,
+ * so we have to do some magic.
+ */
+ regval = _pmbus_read_byte_data(client, page,
+ pmbus_fan_config_registers[f]);
+ if (regval < 0 ||
+ (!(regval & (PB_FAN_1_INSTALLED >> ((f & 1) * 4)))))
+ continue;
+
+ if (pmbus_add_sensor(data, "fan", "input", index,
+ page, pmbus_fan_registers[f],
+ PSC_FAN, true, true, true) == NULL)
+ return -ENOMEM;
+
+ /* Fan control */
+ if (pmbus_check_word_register(client, page,
+ pmbus_fan_command_registers[f])) {
+ ret = pmbus_add_fan_ctrl(client, data, index,
+ page, f, regval);
+ if (ret < 0)
+ return ret;
+ }
+
+ /*
+ * Each fan status register covers multiple fans,
+ * so we have to do some magic.
+ */
+ if ((info->func[page] & pmbus_fan_status_flags[f]) &&
+ pmbus_check_byte_register(client,
+ page, pmbus_fan_status_registers[f])) {
+ int base;
+
+ if (f > 1) /* fan 3, 4 */
+ base = PB_STATUS_FAN34_BASE + page;
+ else
+ base = PB_STATUS_FAN_BASE + page;
+ ret = pmbus_add_boolean(data, "fan",
+ "alarm", index, NULL, NULL, base,
+ PB_FAN_FAN1_WARNING >> (f & 1));
+ if (ret)
+ return ret;
+ ret = pmbus_add_boolean(data, "fan",
+ "fault", index, NULL, NULL, base,
+ PB_FAN_FAN1_FAULT >> (f & 1));
+ if (ret)
+ return ret;
+ }
+ index++;
+ }
+ }
+ return 0;
+}
+
+static int pmbus_find_attributes(struct i2c_client *client,
+ struct pmbus_data *data)
+{
+ int ret;
+
+ /* Voltage sensors */
+ ret = pmbus_add_sensor_attrs(client, data, "in", voltage_attributes,
+ ARRAY_SIZE(voltage_attributes));
+ if (ret)
+ return ret;
+
+ /* Current sensors */
+ ret = pmbus_add_sensor_attrs(client, data, "curr", current_attributes,
+ ARRAY_SIZE(current_attributes));
+ if (ret)
+ return ret;
+
+ /* Power sensors */
+ ret = pmbus_add_sensor_attrs(client, data, "power", power_attributes,
+ ARRAY_SIZE(power_attributes));
+ if (ret)
+ return ret;
+
+ /* Temperature sensors */
+ ret = pmbus_add_sensor_attrs(client, data, "temp", temp_attributes,
+ ARRAY_SIZE(temp_attributes));
+ if (ret)
+ return ret;
+
+ /* Fans */
+ ret = pmbus_add_fan_attributes(client, data);
+ return ret;
+}
+
+/*
+ * Identify chip parameters.
+ * This function is called for all chips.
+ */
+static int pmbus_identify_common(struct i2c_client *client,
+ struct pmbus_data *data, int page)
+{
+ int vout_mode = -1;
+
+ if (pmbus_check_byte_register(client, page, PMBUS_VOUT_MODE))
+ vout_mode = _pmbus_read_byte_data(client, page,
+ PMBUS_VOUT_MODE);
+ if (vout_mode >= 0 && vout_mode != 0xff) {
+ /*
+ * Not all chips support the VOUT_MODE command,
+ * so a failure to read it is not an error.
+ */
+ switch (vout_mode >> 5) {
+ case 0: /* linear mode */
+ if (data->info->format[PSC_VOLTAGE_OUT] != linear)
+ return -ENODEV;
+
+ data->exponent[page] = ((s8)(vout_mode << 3)) >> 3;
+ break;
+ case 1: /* VID mode */
+ if (data->info->format[PSC_VOLTAGE_OUT] != vid)
+ return -ENODEV;
+ break;
+ case 2: /* direct mode */
+ if (data->info->format[PSC_VOLTAGE_OUT] != direct)
+ return -ENODEV;
+ break;
+ default:
+ return -ENODEV;
+ }
+ }
+
+ pmbus_clear_fault_page(client, page);
+ return 0;
+}
+
+static int pmbus_read_status_byte(struct i2c_client *client, int page)
+{
+ return _pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE);
+}
+
+static int pmbus_read_status_word(struct i2c_client *client, int page)
+{
+ return _pmbus_read_word_data(client, page, PMBUS_STATUS_WORD);
+}
+
+static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
+ struct pmbus_driver_info *info)
+{
+ struct device *dev = &client->dev;
+ int page, ret;
+
+ /*
+ * Some PMBus chips don't support PMBUS_STATUS_WORD, so try
+ * to use PMBUS_STATUS_BYTE instead if that is the case.
+ * Bail out if both registers are not supported.
+ */
+ data->read_status = pmbus_read_status_word;
+ ret = i2c_smbus_read_word_data(client, PMBUS_STATUS_WORD);
+ if (ret < 0 || ret == 0xffff) {
+ data->read_status = pmbus_read_status_byte;
+ ret = i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE);
+ if (ret < 0 || ret == 0xff) {
+ dev_err(dev, "PMBus status register not found\n");
+ return -ENODEV;
+ }
+ } else {
+ data->has_status_word = true;
+ }
+
+ /* Enable PEC if the controller supports it */
+ ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
+ if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
+ client->flags |= I2C_CLIENT_PEC;
+
+ if (data->info->pages)
+ pmbus_clear_faults(client);
+ else
+ pmbus_clear_fault_page(client, -1);
+
+ if (info->identify) {
+ ret = (*info->identify)(client, info);
+ if (ret < 0) {
+ dev_err(dev, "Chip identification failed\n");
+ return ret;
+ }
+ }
+
+ if (info->pages <= 0 || info->pages > PMBUS_PAGES) {
+ dev_err(dev, "Bad number of PMBus pages: %d\n", info->pages);
+ return -ENODEV;
+ }
+
+ for (page = 0; page < info->pages; page++) {
+ ret = pmbus_identify_common(client, data, page);
+ if (ret < 0) {
+ dev_err(dev, "Failed to identify chip capabilities\n");
+ return ret;
+ }
+ }
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_REGULATOR)
+static int pmbus_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ struct device *dev = rdev_get_dev(rdev);
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ u8 page = rdev_get_id(rdev);
+ int ret;
+
+ mutex_lock(&data->update_lock);
+ ret = pmbus_read_byte_data(client, page, PMBUS_OPERATION);
+ mutex_unlock(&data->update_lock);
+
+ if (ret < 0)
+ return ret;
+
+ return !!(ret & PB_OPERATION_CONTROL_ON);
+}
+
+static int _pmbus_regulator_on_off(struct regulator_dev *rdev, bool enable)
+{
+ struct device *dev = rdev_get_dev(rdev);
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ u8 page = rdev_get_id(rdev);
+ int ret;
+
+ mutex_lock(&data->update_lock);
+ ret = pmbus_update_byte_data(client, page, PMBUS_OPERATION,
+ PB_OPERATION_CONTROL_ON,
+ enable ? PB_OPERATION_CONTROL_ON : 0);
+ mutex_unlock(&data->update_lock);
+
+ return ret;
+}
+
+static int pmbus_regulator_enable(struct regulator_dev *rdev)
+{
+ return _pmbus_regulator_on_off(rdev, 1);
+}
+
+static int pmbus_regulator_disable(struct regulator_dev *rdev)
+{
+ return _pmbus_regulator_on_off(rdev, 0);
+}
+
+const struct regulator_ops pmbus_regulator_ops = {
+ .enable = pmbus_regulator_enable,
+ .disable = pmbus_regulator_disable,
+ .is_enabled = pmbus_regulator_is_enabled,
+};
+EXPORT_SYMBOL_GPL(pmbus_regulator_ops);
+
+static int pmbus_regulator_register(struct pmbus_data *data)
+{
+ struct device *dev = data->dev;
+ const struct pmbus_driver_info *info = data->info;
+ const struct pmbus_platform_data *pdata = dev_get_platdata(dev);
+ struct regulator_dev *rdev;
+ int i;
+
+ for (i = 0; i < info->num_regulators; i++) {
+ struct regulator_config config = { };
+
+ config.dev = dev;
+ config.driver_data = data;
+
+ if (pdata && pdata->reg_init_data)
+ config.init_data = &pdata->reg_init_data[i];
+
+ rdev = devm_regulator_register(dev, &info->reg_desc[i],
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "Failed to register %s regulator\n",
+ info->reg_desc[i].name);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+#else
+static int pmbus_regulator_register(struct pmbus_data *data)
+{
+ return 0;
+}
+#endif
+
+static struct dentry *pmbus_debugfs_dir; /* pmbus debugfs directory */
+
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+static int pmbus_debugfs_get(void *data, u64 *val)
+{
+ int rc;
+ struct pmbus_debugfs_entry *entry = data;
+
+ rc = _pmbus_read_byte_data(entry->client, entry->page, entry->reg);
+ if (rc < 0)
+ return rc;
+
+ *val = rc;
+
+ return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(pmbus_debugfs_ops, pmbus_debugfs_get, NULL,
+ "0x%02llx\n");
+
+static int pmbus_debugfs_get_status(void *data, u64 *val)
+{
+ int rc;
+ struct pmbus_debugfs_entry *entry = data;
+ struct pmbus_data *pdata = i2c_get_clientdata(entry->client);
+
+ rc = pdata->read_status(entry->client, entry->page);
+ if (rc < 0)
+ return rc;
+
+ *val = rc;
+
+ return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(pmbus_debugfs_ops_status, pmbus_debugfs_get_status,
+ NULL, "0x%04llx\n");
+
+static int pmbus_init_debugfs(struct i2c_client *client,
+ struct pmbus_data *data)
+{
+ int i, idx = 0;
+ char name[PMBUS_NAME_SIZE];
+ struct pmbus_debugfs_entry *entries;
+
+ if (!pmbus_debugfs_dir)
+ return -ENODEV;
+
+ /*
+ * Create the debugfs directory for this device. Use the hwmon device
+ * name to avoid conflicts (hwmon numbers are globally unique).
+ */
+ data->debugfs = debugfs_create_dir(dev_name(data->hwmon_dev),
+ pmbus_debugfs_dir);
+ if (IS_ERR_OR_NULL(data->debugfs)) {
+ data->debugfs = NULL;
+ return -ENODEV;
+ }
+
+ /* Allocate the max possible entries we need. */
+ entries = devm_kcalloc(data->dev,
+ data->info->pages * 10, sizeof(*entries),
+ GFP_KERNEL);
+ if (!entries)
+ return -ENOMEM;
+
+ for (i = 0; i < data->info->pages; ++i) {
+ /* Check accessibility of status register if it's not page 0 */
+ if (!i || pmbus_check_status_register(client, i)) {
+ /* No need to set reg as we have special read op. */
+ entries[idx].client = client;
+ entries[idx].page = i;
+ scnprintf(name, PMBUS_NAME_SIZE, "status%d", i);
+ debugfs_create_file(name, 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops_status);
+ }
+
+ if (data->info->func[i] & PMBUS_HAVE_STATUS_VOUT) {
+ entries[idx].client = client;
+ entries[idx].page = i;
+ entries[idx].reg = PMBUS_STATUS_VOUT;
+ scnprintf(name, PMBUS_NAME_SIZE, "status%d_vout", i);
+ debugfs_create_file(name, 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops);
+ }
+
+ if (data->info->func[i] & PMBUS_HAVE_STATUS_IOUT) {
+ entries[idx].client = client;
+ entries[idx].page = i;
+ entries[idx].reg = PMBUS_STATUS_IOUT;
+ scnprintf(name, PMBUS_NAME_SIZE, "status%d_iout", i);
+ debugfs_create_file(name, 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops);
+ }
+
+ if (data->info->func[i] & PMBUS_HAVE_STATUS_INPUT) {
+ entries[idx].client = client;
+ entries[idx].page = i;
+ entries[idx].reg = PMBUS_STATUS_INPUT;
+ scnprintf(name, PMBUS_NAME_SIZE, "status%d_input", i);
+ debugfs_create_file(name, 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops);
+ }
+
+ if (data->info->func[i] & PMBUS_HAVE_STATUS_TEMP) {
+ entries[idx].client = client;
+ entries[idx].page = i;
+ entries[idx].reg = PMBUS_STATUS_TEMPERATURE;
+ scnprintf(name, PMBUS_NAME_SIZE, "status%d_temp", i);
+ debugfs_create_file(name, 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops);
+ }
+
+ if (pmbus_check_byte_register(client, i, PMBUS_STATUS_CML)) {
+ entries[idx].client = client;
+ entries[idx].page = i;
+ entries[idx].reg = PMBUS_STATUS_CML;
+ scnprintf(name, PMBUS_NAME_SIZE, "status%d_cml", i);
+ debugfs_create_file(name, 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops);
+ }
+
+ if (pmbus_check_byte_register(client, i, PMBUS_STATUS_OTHER)) {
+ entries[idx].client = client;
+ entries[idx].page = i;
+ entries[idx].reg = PMBUS_STATUS_OTHER;
+ scnprintf(name, PMBUS_NAME_SIZE, "status%d_other", i);
+ debugfs_create_file(name, 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops);
+ }
+
+ if (pmbus_check_byte_register(client, i,
+ PMBUS_STATUS_MFR_SPECIFIC)) {
+ entries[idx].client = client;
+ entries[idx].page = i;
+ entries[idx].reg = PMBUS_STATUS_MFR_SPECIFIC;
+ scnprintf(name, PMBUS_NAME_SIZE, "status%d_mfr", i);
+ debugfs_create_file(name, 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops);
+ }
+
+ if (data->info->func[i] & PMBUS_HAVE_STATUS_FAN12) {
+ entries[idx].client = client;
+ entries[idx].page = i;
+ entries[idx].reg = PMBUS_STATUS_FAN_12;
+ scnprintf(name, PMBUS_NAME_SIZE, "status%d_fan12", i);
+ debugfs_create_file(name, 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops);
+ }
+
+ if (data->info->func[i] & PMBUS_HAVE_STATUS_FAN34) {
+ entries[idx].client = client;
+ entries[idx].page = i;
+ entries[idx].reg = PMBUS_STATUS_FAN_34;
+ scnprintf(name, PMBUS_NAME_SIZE, "status%d_fan34", i);
+ debugfs_create_file(name, 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops);
+ }
+ }
+
+ return 0;
+}
+#else
+static int pmbus_init_debugfs(struct i2c_client *client,
+ struct pmbus_data *data)
+{
+ return 0;
+}
+#endif /* IS_ENABLED(CONFIG_DEBUG_FS) */
+
+int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
+ struct pmbus_driver_info *info)
+{
+ struct device *dev = &client->dev;
+ const struct pmbus_platform_data *pdata = dev_get_platdata(dev);
+ struct pmbus_data *data;
+ int ret;
+
+ if (!info)
+ return -ENODEV;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE
+ | I2C_FUNC_SMBUS_BYTE_DATA
+ | I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+ data->dev = dev;
+
+ if (pdata)
+ data->flags = pdata->flags;
+ data->info = info;
+
+ ret = pmbus_init_common(client, data, info);
+ if (ret < 0)
+ return ret;
+
+ ret = pmbus_find_attributes(client, data);
+ if (ret)
+ goto out_kfree;
+
+ /*
+ * If there are no attributes, something is wrong.
+ * Bail out instead of trying to register nothing.
+ */
+ if (!data->num_attributes) {
+ dev_err(dev, "No attributes found\n");
+ ret = -ENODEV;
+ goto out_kfree;
+ }
+
+ data->groups[0] = &data->group;
+ data->hwmon_dev = hwmon_device_register_with_groups(dev, client->name,
+ data, data->groups);
+ if (IS_ERR(data->hwmon_dev)) {
+ ret = PTR_ERR(data->hwmon_dev);
+ dev_err(dev, "Failed to register hwmon device\n");
+ goto out_kfree;
+ }
+
+ ret = pmbus_regulator_register(data);
+ if (ret)
+ goto out_unregister;
+
+ ret = pmbus_init_debugfs(client, data);
+ if (ret)
+ dev_warn(dev, "Failed to register debugfs\n");
+
+ return 0;
+
+out_unregister:
+ hwmon_device_unregister(data->hwmon_dev);
+out_kfree:
+ kfree(data->group.attrs);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pmbus_do_probe);
+
+int pmbus_do_remove(struct i2c_client *client)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+
+ debugfs_remove_recursive(data->debugfs);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ kfree(data->group.attrs);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pmbus_do_remove);
+
+struct dentry *pmbus_get_debugfs_dir(struct i2c_client *client)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+
+ return data->debugfs;
+}
+EXPORT_SYMBOL_GPL(pmbus_get_debugfs_dir);
+
+static int __init pmbus_core_init(void)
+{
+ pmbus_debugfs_dir = debugfs_create_dir("pmbus", NULL);
+ if (IS_ERR(pmbus_debugfs_dir))
+ pmbus_debugfs_dir = NULL;
+
+ return 0;
+}
+
+static void __exit pmbus_core_exit(void)
+{
+ debugfs_remove_recursive(pmbus_debugfs_dir);
+}
+
+module_init(pmbus_core_init);
+module_exit(pmbus_core_exit);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/tps40422.c b/drivers/hwmon/pmbus/tps40422.c
new file mode 100644
index 000000000..32803825d
--- /dev/null
+++ b/drivers/hwmon/pmbus/tps40422.c
@@ -0,0 +1,64 @@
+/*
+ * Hardware monitoring driver for TI TPS40422
+ *
+ * Copyright (c) 2014 Nokia Solutions and Networks.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info tps40422_info = {
+ .pages = 2,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = linear,
+ .format[PSC_TEMPERATURE] = linear,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_TEMP2
+ | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_TEMP
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_TEMP2
+ | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_TEMP
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+};
+
+static int tps40422_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ return pmbus_do_probe(client, id, &tps40422_info);
+}
+
+static const struct i2c_device_id tps40422_id[] = {
+ {"tps40422", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, tps40422_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver tps40422_driver = {
+ .driver = {
+ .name = "tps40422",
+ },
+ .probe = tps40422_probe,
+ .remove = pmbus_do_remove,
+ .id_table = tps40422_id,
+};
+
+module_i2c_driver(tps40422_driver);
+
+MODULE_AUTHOR("Zhu Laiwen <richard.zhu@nsn.com>");
+MODULE_DESCRIPTION("PMBus driver for TI TPS40422");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/tps53679.c b/drivers/hwmon/pmbus/tps53679.c
new file mode 100644
index 000000000..2bc352c53
--- /dev/null
+++ b/drivers/hwmon/pmbus/tps53679.c
@@ -0,0 +1,120 @@
+/*
+ * Hardware monitoring driver for Texas Instruments TPS53679
+ *
+ * Copyright (c) 2017 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define TPS53679_PROT_VR12_5MV 0x01 /* VR12.0 mode, 5-mV DAC */
+#define TPS53679_PROT_VR12_5_10MV 0x02 /* VR12.5 mode, 10-mV DAC */
+#define TPS53679_PROT_VR13_10MV 0x04 /* VR13.0 mode, 10-mV DAC */
+#define TPS53679_PROT_IMVP8_5MV 0x05 /* IMVP8 mode, 5-mV DAC */
+#define TPS53679_PROT_VR13_5MV 0x07 /* VR13.0 mode, 5-mV DAC */
+#define TPS53679_PAGE_NUM 2
+
+static int tps53679_identify(struct i2c_client *client,
+ struct pmbus_driver_info *info)
+{
+ u8 vout_params;
+ int ret;
+
+ /* Read the register with VOUT scaling value.*/
+ ret = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+ if (ret < 0)
+ return ret;
+
+ vout_params = ret & GENMASK(4, 0);
+
+ switch (vout_params) {
+ case TPS53679_PROT_VR13_10MV:
+ case TPS53679_PROT_VR12_5_10MV:
+ info->vrm_version = vr13;
+ break;
+ case TPS53679_PROT_VR13_5MV:
+ case TPS53679_PROT_VR12_5MV:
+ case TPS53679_PROT_IMVP8_5MV:
+ info->vrm_version = vr12;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct pmbus_driver_info tps53679_info = {
+ .pages = TPS53679_PAGE_NUM,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = vid,
+ .format[PSC_TEMPERATURE] = linear,
+ .format[PSC_CURRENT_OUT] = linear,
+ .format[PSC_POWER] = linear,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_POUT,
+ .func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_POUT,
+ .identify = tps53679_identify,
+};
+
+static int tps53679_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pmbus_driver_info *info;
+
+ info = devm_kmemdup(&client->dev, &tps53679_info, sizeof(*info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ return pmbus_do_probe(client, id, info);
+}
+
+static const struct i2c_device_id tps53679_id[] = {
+ {"tps53679", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, tps53679_id);
+
+static const struct of_device_id tps53679_of_match[] = {
+ {.compatible = "ti,tps53679"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, tps53679_of_match);
+
+static struct i2c_driver tps53679_driver = {
+ .driver = {
+ .name = "tps53679",
+ .of_match_table = of_match_ptr(tps53679_of_match),
+ },
+ .probe = tps53679_probe,
+ .remove = pmbus_do_remove,
+ .id_table = tps53679_id,
+};
+
+module_i2c_driver(tps53679_driver);
+
+MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
+MODULE_DESCRIPTION("PMBus driver for Texas Instruments TPS53679");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c
new file mode 100644
index 000000000..ae93885fc
--- /dev/null
+++ b/drivers/hwmon/pmbus/ucd9000.c
@@ -0,0 +1,632 @@
+/*
+ * Hardware monitoring driver for UCD90xxx Sequencer and System Health
+ * Controller series
+ *
+ * Copyright (C) 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/pmbus.h>
+#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
+#include "pmbus.h"
+
+enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 };
+
+#define UCD9000_MONITOR_CONFIG 0xd5
+#define UCD9000_NUM_PAGES 0xd6
+#define UCD9000_FAN_CONFIG_INDEX 0xe7
+#define UCD9000_FAN_CONFIG 0xe8
+#define UCD9000_MFR_STATUS 0xf3
+#define UCD9000_GPIO_SELECT 0xfa
+#define UCD9000_GPIO_CONFIG 0xfb
+#define UCD9000_DEVICE_ID 0xfd
+
+/* GPIO CONFIG bits */
+#define UCD9000_GPIO_CONFIG_ENABLE BIT(0)
+#define UCD9000_GPIO_CONFIG_OUT_ENABLE BIT(1)
+#define UCD9000_GPIO_CONFIG_OUT_VALUE BIT(2)
+#define UCD9000_GPIO_CONFIG_STATUS BIT(3)
+#define UCD9000_GPIO_INPUT 0
+#define UCD9000_GPIO_OUTPUT 1
+
+#define UCD9000_MON_TYPE(x) (((x) >> 5) & 0x07)
+#define UCD9000_MON_PAGE(x) ((x) & 0x0f)
+
+#define UCD9000_MON_VOLTAGE 1
+#define UCD9000_MON_TEMPERATURE 2
+#define UCD9000_MON_CURRENT 3
+#define UCD9000_MON_VOLTAGE_HW 4
+
+#define UCD9000_NUM_FAN 4
+
+#define UCD9000_GPIO_NAME_LEN 16
+#define UCD9090_NUM_GPIOS 23
+#define UCD901XX_NUM_GPIOS 26
+#define UCD90910_NUM_GPIOS 26
+
+#define UCD9000_DEBUGFS_NAME_LEN 24
+#define UCD9000_GPI_COUNT 8
+
+struct ucd9000_data {
+ u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX];
+ struct pmbus_driver_info info;
+#ifdef CONFIG_GPIOLIB
+ struct gpio_chip gpio;
+#endif
+ struct dentry *debugfs;
+};
+#define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info)
+
+struct ucd9000_debugfs_entry {
+ struct i2c_client *client;
+ u8 index;
+};
+
+static int ucd9000_get_fan_config(struct i2c_client *client, int fan)
+{
+ int fan_config = 0;
+ struct ucd9000_data *data
+ = to_ucd9000_data(pmbus_get_driver_info(client));
+
+ if (data->fan_data[fan][3] & 1)
+ fan_config |= PB_FAN_2_INSTALLED; /* Use lower bit position */
+
+ /* Pulses/revolution */
+ fan_config |= (data->fan_data[fan][3] & 0x06) >> 1;
+
+ return fan_config;
+}
+
+static int ucd9000_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ int ret = 0;
+ int fan_config;
+
+ switch (reg) {
+ case PMBUS_FAN_CONFIG_12:
+ if (page > 0)
+ return -ENXIO;
+
+ ret = ucd9000_get_fan_config(client, 0);
+ if (ret < 0)
+ return ret;
+ fan_config = ret << 4;
+ ret = ucd9000_get_fan_config(client, 1);
+ if (ret < 0)
+ return ret;
+ fan_config |= ret;
+ ret = fan_config;
+ break;
+ case PMBUS_FAN_CONFIG_34:
+ if (page > 0)
+ return -ENXIO;
+
+ ret = ucd9000_get_fan_config(client, 2);
+ if (ret < 0)
+ return ret;
+ fan_config = ret << 4;
+ ret = ucd9000_get_fan_config(client, 3);
+ if (ret < 0)
+ return ret;
+ fan_config |= ret;
+ ret = fan_config;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static const struct i2c_device_id ucd9000_id[] = {
+ {"ucd9000", ucd9000},
+ {"ucd90120", ucd90120},
+ {"ucd90124", ucd90124},
+ {"ucd90160", ucd90160},
+ {"ucd9090", ucd9090},
+ {"ucd90910", ucd90910},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ucd9000_id);
+
+static const struct of_device_id ucd9000_of_match[] = {
+ {
+ .compatible = "ti,ucd9000",
+ .data = (void *)ucd9000
+ },
+ {
+ .compatible = "ti,ucd90120",
+ .data = (void *)ucd90120
+ },
+ {
+ .compatible = "ti,ucd90124",
+ .data = (void *)ucd90124
+ },
+ {
+ .compatible = "ti,ucd90160",
+ .data = (void *)ucd90160
+ },
+ {
+ .compatible = "ti,ucd9090",
+ .data = (void *)ucd9090
+ },
+ {
+ .compatible = "ti,ucd90910",
+ .data = (void *)ucd90910
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ucd9000_of_match);
+
+#ifdef CONFIG_GPIOLIB
+static int ucd9000_gpio_read_config(struct i2c_client *client,
+ unsigned int offset)
+{
+ int ret;
+
+ /* No page set required */
+ ret = i2c_smbus_write_byte_data(client, UCD9000_GPIO_SELECT, offset);
+ if (ret < 0)
+ return ret;
+
+ return i2c_smbus_read_byte_data(client, UCD9000_GPIO_CONFIG);
+}
+
+static int ucd9000_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+ struct i2c_client *client = gpiochip_get_data(gc);
+ int ret;
+
+ ret = ucd9000_gpio_read_config(client, offset);
+ if (ret < 0)
+ return ret;
+
+ return !!(ret & UCD9000_GPIO_CONFIG_STATUS);
+}
+
+static void ucd9000_gpio_set(struct gpio_chip *gc, unsigned int offset,
+ int value)
+{
+ struct i2c_client *client = gpiochip_get_data(gc);
+ int ret;
+
+ ret = ucd9000_gpio_read_config(client, offset);
+ if (ret < 0) {
+ dev_dbg(&client->dev, "failed to read GPIO %d config: %d\n",
+ offset, ret);
+ return;
+ }
+
+ if (value) {
+ if (ret & UCD9000_GPIO_CONFIG_STATUS)
+ return;
+
+ ret |= UCD9000_GPIO_CONFIG_STATUS;
+ } else {
+ if (!(ret & UCD9000_GPIO_CONFIG_STATUS))
+ return;
+
+ ret &= ~UCD9000_GPIO_CONFIG_STATUS;
+ }
+
+ ret |= UCD9000_GPIO_CONFIG_ENABLE;
+
+ /* Page set not required */
+ ret = i2c_smbus_write_byte_data(client, UCD9000_GPIO_CONFIG, ret);
+ if (ret < 0) {
+ dev_dbg(&client->dev, "Failed to write GPIO %d config: %d\n",
+ offset, ret);
+ return;
+ }
+
+ ret &= ~UCD9000_GPIO_CONFIG_ENABLE;
+
+ ret = i2c_smbus_write_byte_data(client, UCD9000_GPIO_CONFIG, ret);
+ if (ret < 0)
+ dev_dbg(&client->dev, "Failed to write GPIO %d config: %d\n",
+ offset, ret);
+}
+
+static int ucd9000_gpio_get_direction(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ struct i2c_client *client = gpiochip_get_data(gc);
+ int ret;
+
+ ret = ucd9000_gpio_read_config(client, offset);
+ if (ret < 0)
+ return ret;
+
+ return !(ret & UCD9000_GPIO_CONFIG_OUT_ENABLE);
+}
+
+static int ucd9000_gpio_set_direction(struct gpio_chip *gc,
+ unsigned int offset, bool direction_out,
+ int requested_out)
+{
+ struct i2c_client *client = gpiochip_get_data(gc);
+ int ret, config, out_val;
+
+ ret = ucd9000_gpio_read_config(client, offset);
+ if (ret < 0)
+ return ret;
+
+ if (direction_out) {
+ out_val = requested_out ? UCD9000_GPIO_CONFIG_OUT_VALUE : 0;
+
+ if (ret & UCD9000_GPIO_CONFIG_OUT_ENABLE) {
+ if ((ret & UCD9000_GPIO_CONFIG_OUT_VALUE) == out_val)
+ return 0;
+ } else {
+ ret |= UCD9000_GPIO_CONFIG_OUT_ENABLE;
+ }
+
+ if (out_val)
+ ret |= UCD9000_GPIO_CONFIG_OUT_VALUE;
+ else
+ ret &= ~UCD9000_GPIO_CONFIG_OUT_VALUE;
+
+ } else {
+ if (!(ret & UCD9000_GPIO_CONFIG_OUT_ENABLE))
+ return 0;
+
+ ret &= ~UCD9000_GPIO_CONFIG_OUT_ENABLE;
+ }
+
+ ret |= UCD9000_GPIO_CONFIG_ENABLE;
+ config = ret;
+
+ /* Page set not required */
+ ret = i2c_smbus_write_byte_data(client, UCD9000_GPIO_CONFIG, config);
+ if (ret < 0)
+ return ret;
+
+ config &= ~UCD9000_GPIO_CONFIG_ENABLE;
+
+ return i2c_smbus_write_byte_data(client, UCD9000_GPIO_CONFIG, config);
+}
+
+static int ucd9000_gpio_direction_input(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ return ucd9000_gpio_set_direction(gc, offset, UCD9000_GPIO_INPUT, 0);
+}
+
+static int ucd9000_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int offset, int val)
+{
+ return ucd9000_gpio_set_direction(gc, offset, UCD9000_GPIO_OUTPUT,
+ val);
+}
+
+static void ucd9000_probe_gpio(struct i2c_client *client,
+ const struct i2c_device_id *mid,
+ struct ucd9000_data *data)
+{
+ int rc;
+
+ switch (mid->driver_data) {
+ case ucd9090:
+ data->gpio.ngpio = UCD9090_NUM_GPIOS;
+ break;
+ case ucd90120:
+ case ucd90124:
+ case ucd90160:
+ data->gpio.ngpio = UCD901XX_NUM_GPIOS;
+ break;
+ case ucd90910:
+ data->gpio.ngpio = UCD90910_NUM_GPIOS;
+ break;
+ default:
+ return; /* GPIO support is optional. */
+ }
+
+ /*
+ * Pinmux support has not been added to the new gpio_chip.
+ * This support should be added when possible given the mux
+ * behavior of these IO devices.
+ */
+ data->gpio.label = client->name;
+ data->gpio.get_direction = ucd9000_gpio_get_direction;
+ data->gpio.direction_input = ucd9000_gpio_direction_input;
+ data->gpio.direction_output = ucd9000_gpio_direction_output;
+ data->gpio.get = ucd9000_gpio_get;
+ data->gpio.set = ucd9000_gpio_set;
+ data->gpio.can_sleep = true;
+ data->gpio.base = -1;
+ data->gpio.parent = &client->dev;
+
+ rc = devm_gpiochip_add_data(&client->dev, &data->gpio, client);
+ if (rc)
+ dev_warn(&client->dev, "Could not add gpiochip: %d\n", rc);
+}
+#else
+static void ucd9000_probe_gpio(struct i2c_client *client,
+ const struct i2c_device_id *mid,
+ struct ucd9000_data *data)
+{
+}
+#endif /* CONFIG_GPIOLIB */
+
+#ifdef CONFIG_DEBUG_FS
+static int ucd9000_get_mfr_status(struct i2c_client *client, u8 *buffer)
+{
+ int ret = pmbus_set_page(client, 0);
+
+ if (ret < 0)
+ return ret;
+
+ return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS, buffer);
+}
+
+static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val)
+{
+ struct ucd9000_debugfs_entry *entry = data;
+ struct i2c_client *client = entry->client;
+ u8 buffer[I2C_SMBUS_BLOCK_MAX];
+ int ret;
+
+ ret = ucd9000_get_mfr_status(client, buffer);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Attribute only created for devices with gpi fault bits at bits
+ * 16-23, which is the second byte of the response.
+ */
+ *val = !!(buffer[1] & BIT(entry->index));
+
+ return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_bit,
+ ucd9000_debugfs_show_mfr_status_bit, NULL, "%1lld\n");
+
+static ssize_t ucd9000_debugfs_read_mfr_status(struct file *file,
+ char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ struct i2c_client *client = file->private_data;
+ u8 buffer[I2C_SMBUS_BLOCK_MAX];
+ char str[(I2C_SMBUS_BLOCK_MAX * 2) + 2];
+ char *res;
+ int rc;
+
+ rc = ucd9000_get_mfr_status(client, buffer);
+ if (rc < 0)
+ return rc;
+
+ res = bin2hex(str, buffer, min(rc, I2C_SMBUS_BLOCK_MAX));
+ *res++ = '\n';
+ *res = 0;
+
+ return simple_read_from_buffer(buf, count, ppos, str, res - str);
+}
+
+static const struct file_operations ucd9000_debugfs_show_mfr_status_fops = {
+ .llseek = noop_llseek,
+ .read = ucd9000_debugfs_read_mfr_status,
+ .open = simple_open,
+};
+
+static int ucd9000_init_debugfs(struct i2c_client *client,
+ const struct i2c_device_id *mid,
+ struct ucd9000_data *data)
+{
+ struct dentry *debugfs;
+ struct ucd9000_debugfs_entry *entries;
+ int i;
+ char name[UCD9000_DEBUGFS_NAME_LEN];
+
+ debugfs = pmbus_get_debugfs_dir(client);
+ if (!debugfs)
+ return -ENOENT;
+
+ data->debugfs = debugfs_create_dir(client->name, debugfs);
+ if (!data->debugfs)
+ return -ENOENT;
+
+ /*
+ * Of the chips this driver supports, only the UCD9090, UCD90160,
+ * and UCD90910 report GPI faults in their MFR_STATUS register, so only
+ * create the GPI fault debugfs attributes for those chips.
+ */
+ if (mid->driver_data == ucd9090 || mid->driver_data == ucd90160 ||
+ mid->driver_data == ucd90910) {
+ entries = devm_kcalloc(&client->dev,
+ UCD9000_GPI_COUNT, sizeof(*entries),
+ GFP_KERNEL);
+ if (!entries)
+ return -ENOMEM;
+
+ for (i = 0; i < UCD9000_GPI_COUNT; i++) {
+ entries[i].client = client;
+ entries[i].index = i;
+ scnprintf(name, UCD9000_DEBUGFS_NAME_LEN,
+ "gpi%d_alarm", i + 1);
+ debugfs_create_file(name, 0444, data->debugfs,
+ &entries[i],
+ &ucd9000_debugfs_mfr_status_bit);
+ }
+ }
+
+ scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, "mfr_status");
+ debugfs_create_file(name, 0444, data->debugfs, client,
+ &ucd9000_debugfs_show_mfr_status_fops);
+
+ return 0;
+}
+#else
+static int ucd9000_init_debugfs(struct i2c_client *client,
+ const struct i2c_device_id *mid,
+ struct ucd9000_data *data)
+{
+ return 0;
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static int ucd9000_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
+ struct ucd9000_data *data;
+ struct pmbus_driver_info *info;
+ const struct i2c_device_id *mid;
+ enum chips chip;
+ int i, ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_block_data(client, UCD9000_DEVICE_ID,
+ block_buffer);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read device ID\n");
+ return ret;
+ }
+ block_buffer[ret] = '\0';
+ dev_info(&client->dev, "Device ID %s\n", block_buffer);
+
+ for (mid = ucd9000_id; mid->name[0]; mid++) {
+ if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
+ break;
+ }
+ if (!mid->name[0]) {
+ dev_err(&client->dev, "Unsupported device\n");
+ return -ENODEV;
+ }
+
+ if (client->dev.of_node)
+ chip = (enum chips)of_device_get_match_data(&client->dev);
+ else
+ chip = id->driver_data;
+
+ if (chip != ucd9000 && chip != mid->driver_data)
+ dev_notice(&client->dev,
+ "Device mismatch: Configured %s, detected %s\n",
+ id->name, mid->name);
+
+ data = devm_kzalloc(&client->dev, sizeof(struct ucd9000_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ info = &data->info;
+
+ ret = i2c_smbus_read_byte_data(client, UCD9000_NUM_PAGES);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Failed to read number of active pages\n");
+ return ret;
+ }
+ info->pages = ret;
+ if (!info->pages) {
+ dev_err(&client->dev, "No pages configured\n");
+ return -ENODEV;
+ }
+
+ /* The internal temperature sensor is always active */
+ info->func[0] = PMBUS_HAVE_TEMP;
+
+ /* Everything else is configurable */
+ ret = i2c_smbus_read_block_data(client, UCD9000_MONITOR_CONFIG,
+ block_buffer);
+ if (ret <= 0) {
+ dev_err(&client->dev, "Failed to read configuration data\n");
+ return -ENODEV;
+ }
+ for (i = 0; i < ret; i++) {
+ int page = UCD9000_MON_PAGE(block_buffer[i]);
+
+ if (page >= info->pages)
+ continue;
+
+ switch (UCD9000_MON_TYPE(block_buffer[i])) {
+ case UCD9000_MON_VOLTAGE:
+ case UCD9000_MON_VOLTAGE_HW:
+ info->func[page] |= PMBUS_HAVE_VOUT
+ | PMBUS_HAVE_STATUS_VOUT;
+ break;
+ case UCD9000_MON_TEMPERATURE:
+ info->func[page] |= PMBUS_HAVE_TEMP2
+ | PMBUS_HAVE_STATUS_TEMP;
+ break;
+ case UCD9000_MON_CURRENT:
+ info->func[page] |= PMBUS_HAVE_IOUT
+ | PMBUS_HAVE_STATUS_IOUT;
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Fan configuration */
+ if (mid->driver_data == ucd90124) {
+ for (i = 0; i < UCD9000_NUM_FAN; i++) {
+ i2c_smbus_write_byte_data(client,
+ UCD9000_FAN_CONFIG_INDEX, i);
+ ret = i2c_smbus_read_block_data(client,
+ UCD9000_FAN_CONFIG,
+ data->fan_data[i]);
+ if (ret < 0)
+ return ret;
+ }
+ i2c_smbus_write_byte_data(client, UCD9000_FAN_CONFIG_INDEX, 0);
+
+ info->read_byte_data = ucd9000_read_byte_data;
+ info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12
+ | PMBUS_HAVE_FAN34 | PMBUS_HAVE_STATUS_FAN34;
+ }
+
+ ucd9000_probe_gpio(client, mid, data);
+
+ ret = pmbus_do_probe(client, mid, info);
+ if (ret)
+ return ret;
+
+ ret = ucd9000_init_debugfs(client, mid, data);
+ if (ret)
+ dev_warn(&client->dev, "Failed to register debugfs: %d\n",
+ ret);
+
+ return 0;
+}
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ucd9000_driver = {
+ .driver = {
+ .name = "ucd9000",
+ .of_match_table = of_match_ptr(ucd9000_of_match),
+ },
+ .probe = ucd9000_probe,
+ .remove = pmbus_do_remove,
+ .id_table = ucd9000_id,
+};
+
+module_i2c_driver(ucd9000_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for TI UCD90xxx");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
new file mode 100644
index 000000000..3ed945858
--- /dev/null
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -0,0 +1,226 @@
+/*
+ * Hardware monitoring driver for ucd9200 series Digital PWM System Controllers
+ *
+ * Copyright (C) 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+#define UCD9200_PHASE_INFO 0xd2
+#define UCD9200_DEVICE_ID 0xfd
+
+enum chips { ucd9200, ucd9220, ucd9222, ucd9224, ucd9240, ucd9244, ucd9246,
+ ucd9248 };
+
+static const struct i2c_device_id ucd9200_id[] = {
+ {"ucd9200", ucd9200},
+ {"ucd9220", ucd9220},
+ {"ucd9222", ucd9222},
+ {"ucd9224", ucd9224},
+ {"ucd9240", ucd9240},
+ {"ucd9244", ucd9244},
+ {"ucd9246", ucd9246},
+ {"ucd9248", ucd9248},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ucd9200_id);
+
+static const struct of_device_id ucd9200_of_match[] = {
+ {
+ .compatible = "ti,cd9200",
+ .data = (void *)ucd9200
+ },
+ {
+ .compatible = "ti,cd9220",
+ .data = (void *)ucd9220
+ },
+ {
+ .compatible = "ti,cd9222",
+ .data = (void *)ucd9222
+ },
+ {
+ .compatible = "ti,cd9224",
+ .data = (void *)ucd9224
+ },
+ {
+ .compatible = "ti,cd9240",
+ .data = (void *)ucd9240
+ },
+ {
+ .compatible = "ti,cd9244",
+ .data = (void *)ucd9244
+ },
+ {
+ .compatible = "ti,cd9246",
+ .data = (void *)ucd9246
+ },
+ {
+ .compatible = "ti,cd9248",
+ .data = (void *)ucd9248
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ucd9200_of_match);
+
+static int ucd9200_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
+ struct pmbus_driver_info *info;
+ const struct i2c_device_id *mid;
+ enum chips chip;
+ int i, j, ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_block_data(client, UCD9200_DEVICE_ID,
+ block_buffer);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read device ID\n");
+ return ret;
+ }
+ block_buffer[ret] = '\0';
+ dev_info(&client->dev, "Device ID %s\n", block_buffer);
+
+ for (mid = ucd9200_id; mid->name[0]; mid++) {
+ if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
+ break;
+ }
+ if (!mid->name[0]) {
+ dev_err(&client->dev, "Unsupported device\n");
+ return -ENODEV;
+ }
+
+ if (client->dev.of_node)
+ chip = (enum chips)of_device_get_match_data(&client->dev);
+ else
+ chip = id->driver_data;
+
+ if (chip != ucd9200 && chip != mid->driver_data)
+ dev_notice(&client->dev,
+ "Device mismatch: Configured %s, detected %s\n",
+ id->name, mid->name);
+
+ info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ ret = i2c_smbus_read_block_data(client, UCD9200_PHASE_INFO,
+ block_buffer);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read phase information\n");
+ return ret;
+ }
+
+ /*
+ * Calculate number of configured pages (rails) from PHASE_INFO
+ * register.
+ * Rails have to be sequential, so we can abort after finding
+ * the first unconfigured rail.
+ */
+ info->pages = 0;
+ for (i = 0; i < ret; i++) {
+ if (!block_buffer[i])
+ break;
+ info->pages++;
+ }
+ if (!info->pages) {
+ dev_err(&client->dev, "No rails configured\n");
+ return -ENODEV;
+ }
+ dev_info(&client->dev, "%d rails configured\n", info->pages);
+
+ /*
+ * Set PHASE registers on all pages to 0xff to ensure that phase
+ * specific commands will apply to all phases of a given page (rail).
+ * This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
+ * READ_IOUT will return the sum of currents of all phases of a rail,
+ * and READ_TEMPERATURE2 will return the maximum temperature detected
+ * for the the phases of the rail.
+ */
+ for (i = 0; i < info->pages; i++) {
+ /*
+ * Setting PAGE & PHASE fails once in a while for no obvious
+ * reason, so we need to retry a couple of times.
+ */
+ for (j = 0; j < 3; j++) {
+ ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
+ if (ret < 0)
+ continue;
+ ret = i2c_smbus_write_byte_data(client, PMBUS_PHASE,
+ 0xff);
+ if (ret < 0)
+ continue;
+ break;
+ }
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Failed to initialize PHASE registers\n");
+ return ret;
+ }
+ }
+ if (info->pages > 1)
+ i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
+ PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP |
+ PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+
+ for (i = 1; i < info->pages; i++)
+ info->func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_POUT |
+ PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+
+ /* ucd9240 supports a single fan */
+ if (mid->driver_data == ucd9240)
+ info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12;
+
+ return pmbus_do_probe(client, mid, info);
+}
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ucd9200_driver = {
+ .driver = {
+ .name = "ucd9200",
+ .of_match_table = of_match_ptr(ucd9200_of_match),
+ },
+ .probe = ucd9200_probe,
+ .remove = pmbus_do_remove,
+ .id_table = ucd9200_id,
+};
+
+module_i2c_driver(ucd9200_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for TI UCD922x, UCD924x");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c
new file mode 100644
index 000000000..771802d7e
--- /dev/null
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -0,0 +1,420 @@
+/*
+ * Hardware monitoring driver for ZL6100 and compatibles
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/ktime.h>
+#include <linux/delay.h>
+#include "pmbus.h"
+
+enum chips { zl2004, zl2005, zl2006, zl2008, zl2105, zl2106, zl6100, zl6105,
+ zl9101, zl9117 };
+
+struct zl6100_data {
+ int id;
+ ktime_t access; /* chip access time */
+ int delay; /* Delay between chip accesses in uS */
+ struct pmbus_driver_info info;
+};
+
+#define to_zl6100_data(x) container_of(x, struct zl6100_data, info)
+
+#define ZL6100_MFR_CONFIG 0xd0
+#define ZL6100_DEVICE_ID 0xe4
+
+#define ZL6100_MFR_XTEMP_ENABLE BIT(7)
+
+#define MFR_VMON_OV_FAULT_LIMIT 0xf5
+#define MFR_VMON_UV_FAULT_LIMIT 0xf6
+#define MFR_READ_VMON 0xf7
+
+#define VMON_UV_WARNING BIT(5)
+#define VMON_OV_WARNING BIT(4)
+#define VMON_UV_FAULT BIT(1)
+#define VMON_OV_FAULT BIT(0)
+
+#define ZL6100_WAIT_TIME 1000 /* uS */
+
+static ushort delay = ZL6100_WAIT_TIME;
+module_param(delay, ushort, 0644);
+MODULE_PARM_DESC(delay, "Delay between chip accesses in uS");
+
+/* Convert linear sensor value to milli-units */
+static long zl6100_l2d(s16 l)
+{
+ s16 exponent;
+ s32 mantissa;
+ long val;
+
+ exponent = l >> 11;
+ mantissa = ((s16)((l & 0x7ff) << 5)) >> 5;
+
+ val = mantissa;
+
+ /* scale result to milli-units */
+ val = val * 1000L;
+
+ if (exponent >= 0)
+ val <<= exponent;
+ else
+ val >>= -exponent;
+
+ return val;
+}
+
+#define MAX_MANTISSA (1023 * 1000)
+#define MIN_MANTISSA (511 * 1000)
+
+static u16 zl6100_d2l(long val)
+{
+ s16 exponent = 0, mantissa;
+ bool negative = false;
+
+ /* simple case */
+ if (val == 0)
+ return 0;
+
+ if (val < 0) {
+ negative = true;
+ val = -val;
+ }
+
+ /* Reduce large mantissa until it fits into 10 bit */
+ while (val >= MAX_MANTISSA && exponent < 15) {
+ exponent++;
+ val >>= 1;
+ }
+ /* Increase small mantissa to improve precision */
+ while (val < MIN_MANTISSA && exponent > -15) {
+ exponent--;
+ val <<= 1;
+ }
+
+ /* Convert mantissa from milli-units to units */
+ mantissa = DIV_ROUND_CLOSEST(val, 1000);
+
+ /* Ensure that resulting number is within range */
+ if (mantissa > 0x3ff)
+ mantissa = 0x3ff;
+
+ /* restore sign */
+ if (negative)
+ mantissa = -mantissa;
+
+ /* Convert to 5 bit exponent, 11 bit mantissa */
+ return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
+}
+
+/* Some chips need a delay between accesses */
+static inline void zl6100_wait(const struct zl6100_data *data)
+{
+ if (data->delay) {
+ s64 delta = ktime_us_delta(ktime_get(), data->access);
+ if (delta < data->delay)
+ udelay(data->delay - delta);
+ }
+}
+
+static int zl6100_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret, vreg;
+
+ if (page > 0)
+ return -ENXIO;
+
+ if (data->id == zl2005) {
+ /*
+ * Limit register detection is not reliable on ZL2005.
+ * Make sure registers are not erroneously detected.
+ */
+ switch (reg) {
+ case PMBUS_VOUT_OV_WARN_LIMIT:
+ case PMBUS_VOUT_UV_WARN_LIMIT:
+ case PMBUS_IOUT_OC_WARN_LIMIT:
+ return -ENXIO;
+ }
+ }
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VMON:
+ vreg = MFR_READ_VMON;
+ break;
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ case PMBUS_VIRT_VMON_OV_FAULT_LIMIT:
+ vreg = MFR_VMON_OV_FAULT_LIMIT;
+ break;
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ case PMBUS_VIRT_VMON_UV_FAULT_LIMIT:
+ vreg = MFR_VMON_UV_FAULT_LIMIT;
+ break;
+ default:
+ if (reg >= PMBUS_VIRT_BASE)
+ return -ENXIO;
+ vreg = reg;
+ break;
+ }
+
+ zl6100_wait(data);
+ ret = pmbus_read_word_data(client, page, vreg);
+ data->access = ktime_get();
+ if (ret < 0)
+ return ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 9, 10));
+ break;
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 11, 10));
+ break;
+ }
+
+ return ret;
+}
+
+static int zl6100_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret, status;
+
+ if (page > 0)
+ return -ENXIO;
+
+ zl6100_wait(data);
+
+ switch (reg) {
+ case PMBUS_VIRT_STATUS_VMON:
+ ret = pmbus_read_byte_data(client, 0,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (ret < 0)
+ break;
+
+ status = 0;
+ if (ret & VMON_UV_WARNING)
+ status |= PB_VOLTAGE_UV_WARNING;
+ if (ret & VMON_OV_WARNING)
+ status |= PB_VOLTAGE_OV_WARNING;
+ if (ret & VMON_UV_FAULT)
+ status |= PB_VOLTAGE_UV_FAULT;
+ if (ret & VMON_OV_FAULT)
+ status |= PB_VOLTAGE_OV_FAULT;
+ ret = status;
+ break;
+ default:
+ ret = pmbus_read_byte_data(client, page, reg);
+ break;
+ }
+ data->access = ktime_get();
+
+ return ret;
+}
+
+static int zl6100_write_word_data(struct i2c_client *client, int page, int reg,
+ u16 word)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret, vreg;
+
+ if (page > 0)
+ return -ENXIO;
+
+ switch (reg) {
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 9));
+ vreg = MFR_VMON_OV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_OV_FAULT_LIMIT:
+ vreg = MFR_VMON_OV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 11));
+ vreg = MFR_VMON_UV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_UV_FAULT_LIMIT:
+ vreg = MFR_VMON_UV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ default:
+ if (reg >= PMBUS_VIRT_BASE)
+ return -ENXIO;
+ vreg = reg;
+ }
+
+ zl6100_wait(data);
+ ret = pmbus_write_word_data(client, page, vreg, word);
+ data->access = ktime_get();
+
+ return ret;
+}
+
+static int zl6100_write_byte(struct i2c_client *client, int page, u8 value)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret;
+
+ if (page > 0)
+ return -ENXIO;
+
+ zl6100_wait(data);
+ ret = pmbus_write_byte(client, page, value);
+ data->access = ktime_get();
+
+ return ret;
+}
+
+static const struct i2c_device_id zl6100_id[] = {
+ {"bmr450", zl2005},
+ {"bmr451", zl2005},
+ {"bmr462", zl2008},
+ {"bmr463", zl2008},
+ {"bmr464", zl2008},
+ {"zl2004", zl2004},
+ {"zl2005", zl2005},
+ {"zl2006", zl2006},
+ {"zl2008", zl2008},
+ {"zl2105", zl2105},
+ {"zl2106", zl2106},
+ {"zl6100", zl6100},
+ {"zl6105", zl6105},
+ {"zl9101", zl9101},
+ {"zl9117", zl9117},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, zl6100_id);
+
+static int zl6100_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct zl6100_data *data;
+ struct pmbus_driver_info *info;
+ u8 device_id[I2C_SMBUS_BLOCK_MAX + 1];
+ const struct i2c_device_id *mid;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_WORD_DATA
+ | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_block_data(client, ZL6100_DEVICE_ID,
+ device_id);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read device ID\n");
+ return ret;
+ }
+ device_id[ret] = '\0';
+ dev_info(&client->dev, "Device ID %s\n", device_id);
+
+ mid = NULL;
+ for (mid = zl6100_id; mid->name[0]; mid++) {
+ if (!strncasecmp(mid->name, device_id, strlen(mid->name)))
+ break;
+ }
+ if (!mid->name[0]) {
+ dev_err(&client->dev, "Unsupported device\n");
+ return -ENODEV;
+ }
+ if (id->driver_data != mid->driver_data)
+ dev_notice(&client->dev,
+ "Device mismatch: Configured %s, detected %s\n",
+ id->name, mid->name);
+
+ data = devm_kzalloc(&client->dev, sizeof(struct zl6100_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->id = mid->driver_data;
+
+ /*
+ * According to information from the chip vendor, all currently
+ * supported chips are known to require a wait time between I2C
+ * accesses.
+ */
+ data->delay = delay;
+
+ /*
+ * Since there was a direct I2C device access above, wait before
+ * accessing the chip again.
+ */
+ data->access = ktime_get();
+ zl6100_wait(data);
+
+ info = &data->info;
+
+ info->pages = 1;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+
+ /*
+ * ZL2004, ZL9101M, and ZL9117M support monitoring an extra voltage
+ * (VMON for ZL2004, VDRV for ZL9101M and ZL9117M). Report it as vmon.
+ */
+ if (data->id == zl2004 || data->id == zl9101 || data->id == zl9117)
+ info->func[0] |= PMBUS_HAVE_VMON | PMBUS_HAVE_STATUS_VMON;
+
+ ret = i2c_smbus_read_word_data(client, ZL6100_MFR_CONFIG);
+ if (ret < 0)
+ return ret;
+
+ if (ret & ZL6100_MFR_XTEMP_ENABLE)
+ info->func[0] |= PMBUS_HAVE_TEMP2;
+
+ data->access = ktime_get();
+ zl6100_wait(data);
+
+ info->read_word_data = zl6100_read_word_data;
+ info->read_byte_data = zl6100_read_byte_data;
+ info->write_word_data = zl6100_write_word_data;
+ info->write_byte = zl6100_write_byte;
+
+ return pmbus_do_probe(client, mid, info);
+}
+
+static struct i2c_driver zl6100_driver = {
+ .driver = {
+ .name = "zl6100",
+ },
+ .probe = zl6100_probe,
+ .remove = pmbus_do_remove,
+ .id_table = zl6100_id,
+};
+
+module_i2c_driver(zl6100_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for ZL6100 and compatibles");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 19:08:38 +0000