diff options
Diffstat (limited to 'drivers/hwmon/w83791d.c')
| -rw-r--r-- | drivers/hwmon/w83791d.c | 1695 |
1 files changed, 1695 insertions, 0 deletions
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c new file mode 100644 index 000000000..28fa3bd2c --- /dev/null +++ b/drivers/hwmon/w83791d.c @@ -0,0 +1,1695 @@ +/* + * w83791d.c - Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * + * Copyright (C) 2006-2007 Charles Spirakis <bezaur@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Supports following chips: + * + * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA + * w83791d 10 5 5 3 0x71 0x5ca3 yes no + * + * The w83791d chip appears to be part way between the 83781d and the + * 83792d. Thus, this file is derived from both the w83792d.c and + * w83781d.c files. + * + * The w83791g chip is the same as the w83791d but lead-free. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-vid.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/jiffies.h> + +#define NUMBER_OF_VIN 10 +#define NUMBER_OF_FANIN 5 +#define NUMBER_OF_TEMPIN 3 +#define NUMBER_OF_PWM 5 + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, + I2C_CLIENT_END }; + +/* Insmod parameters */ + +static unsigned short force_subclients[4]; +module_param_array(force_subclients, short, NULL, 0); +MODULE_PARM_DESC(force_subclients, + "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}"); + +static bool reset; +module_param(reset, bool, 0); +MODULE_PARM_DESC(reset, "Set to one to force a hardware chip reset"); + +static bool init; +module_param(init, bool, 0); +MODULE_PARM_DESC(init, "Set to one to force extra software initialization"); + +/* The W83791D registers */ +static const u8 W83791D_REG_IN[NUMBER_OF_VIN] = { + 0x20, /* VCOREA in DataSheet */ + 0x21, /* VINR0 in DataSheet */ + 0x22, /* +3.3VIN in DataSheet */ + 0x23, /* VDD5V in DataSheet */ + 0x24, /* +12VIN in DataSheet */ + 0x25, /* -12VIN in DataSheet */ + 0x26, /* -5VIN in DataSheet */ + 0xB0, /* 5VSB in DataSheet */ + 0xB1, /* VBAT in DataSheet */ + 0xB2 /* VINR1 in DataSheet */ +}; + +static const u8 W83791D_REG_IN_MAX[NUMBER_OF_VIN] = { + 0x2B, /* VCOREA High Limit in DataSheet */ + 0x2D, /* VINR0 High Limit in DataSheet */ + 0x2F, /* +3.3VIN High Limit in DataSheet */ + 0x31, /* VDD5V High Limit in DataSheet */ + 0x33, /* +12VIN High Limit in DataSheet */ + 0x35, /* -12VIN High Limit in DataSheet */ + 0x37, /* -5VIN High Limit in DataSheet */ + 0xB4, /* 5VSB High Limit in DataSheet */ + 0xB6, /* VBAT High Limit in DataSheet */ + 0xB8 /* VINR1 High Limit in DataSheet */ +}; +static const u8 W83791D_REG_IN_MIN[NUMBER_OF_VIN] = { + 0x2C, /* VCOREA Low Limit in DataSheet */ + 0x2E, /* VINR0 Low Limit in DataSheet */ + 0x30, /* +3.3VIN Low Limit in DataSheet */ + 0x32, /* VDD5V Low Limit in DataSheet */ + 0x34, /* +12VIN Low Limit in DataSheet */ + 0x36, /* -12VIN Low Limit in DataSheet */ + 0x38, /* -5VIN Low Limit in DataSheet */ + 0xB5, /* 5VSB Low Limit in DataSheet */ + 0xB7, /* VBAT Low Limit in DataSheet */ + 0xB9 /* VINR1 Low Limit in DataSheet */ +}; +static const u8 W83791D_REG_FAN[NUMBER_OF_FANIN] = { + 0x28, /* FAN 1 Count in DataSheet */ + 0x29, /* FAN 2 Count in DataSheet */ + 0x2A, /* FAN 3 Count in DataSheet */ + 0xBA, /* FAN 4 Count in DataSheet */ + 0xBB, /* FAN 5 Count in DataSheet */ +}; +static const u8 W83791D_REG_FAN_MIN[NUMBER_OF_FANIN] = { + 0x3B, /* FAN 1 Count Low Limit in DataSheet */ + 0x3C, /* FAN 2 Count Low Limit in DataSheet */ + 0x3D, /* FAN 3 Count Low Limit in DataSheet */ + 0xBC, /* FAN 4 Count Low Limit in DataSheet */ + 0xBD, /* FAN 5 Count Low Limit in DataSheet */ +}; + +static const u8 W83791D_REG_PWM[NUMBER_OF_PWM] = { + 0x81, /* PWM 1 duty cycle register in DataSheet */ + 0x83, /* PWM 2 duty cycle register in DataSheet */ + 0x94, /* PWM 3 duty cycle register in DataSheet */ + 0xA0, /* PWM 4 duty cycle register in DataSheet */ + 0xA1, /* PWM 5 duty cycle register in DataSheet */ +}; + +static const u8 W83791D_REG_TEMP_TARGET[3] = { + 0x85, /* PWM 1 target temperature for temp 1 */ + 0x86, /* PWM 2 target temperature for temp 2 */ + 0x96, /* PWM 3 target temperature for temp 3 */ +}; + +static const u8 W83791D_REG_TEMP_TOL[2] = { + 0x87, /* PWM 1/2 temperature tolerance */ + 0x97, /* PWM 3 temperature tolerance */ +}; + +static const u8 W83791D_REG_FAN_CFG[2] = { + 0x84, /* FAN 1/2 configuration */ + 0x95, /* FAN 3 configuration */ +}; + +static const u8 W83791D_REG_FAN_DIV[3] = { + 0x47, /* contains FAN1 and FAN2 Divisor */ + 0x4b, /* contains FAN3 Divisor */ + 0x5C, /* contains FAN4 and FAN5 Divisor */ +}; + +#define W83791D_REG_BANK 0x4E +#define W83791D_REG_TEMP2_CONFIG 0xC2 +#define W83791D_REG_TEMP3_CONFIG 0xCA + +static const u8 W83791D_REG_TEMP1[3] = { + 0x27, /* TEMP 1 in DataSheet */ + 0x39, /* TEMP 1 Over in DataSheet */ + 0x3A, /* TEMP 1 Hyst in DataSheet */ +}; + +static const u8 W83791D_REG_TEMP_ADD[2][6] = { + {0xC0, /* TEMP 2 in DataSheet */ + 0xC1, /* TEMP 2(0.5 deg) in DataSheet */ + 0xC5, /* TEMP 2 Over High part in DataSheet */ + 0xC6, /* TEMP 2 Over Low part in DataSheet */ + 0xC3, /* TEMP 2 Thyst High part in DataSheet */ + 0xC4}, /* TEMP 2 Thyst Low part in DataSheet */ + {0xC8, /* TEMP 3 in DataSheet */ + 0xC9, /* TEMP 3(0.5 deg) in DataSheet */ + 0xCD, /* TEMP 3 Over High part in DataSheet */ + 0xCE, /* TEMP 3 Over Low part in DataSheet */ + 0xCB, /* TEMP 3 Thyst High part in DataSheet */ + 0xCC} /* TEMP 3 Thyst Low part in DataSheet */ +}; + +#define W83791D_REG_BEEP_CONFIG 0x4D + +static const u8 W83791D_REG_BEEP_CTRL[3] = { + 0x56, /* BEEP Control Register 1 */ + 0x57, /* BEEP Control Register 2 */ + 0xA3, /* BEEP Control Register 3 */ +}; + +#define W83791D_REG_GPIO 0x15 +#define W83791D_REG_CONFIG 0x40 +#define W83791D_REG_VID_FANDIV 0x47 +#define W83791D_REG_DID_VID4 0x49 +#define W83791D_REG_WCHIPID 0x58 +#define W83791D_REG_CHIPMAN 0x4F +#define W83791D_REG_PIN 0x4B +#define W83791D_REG_I2C_SUBADDR 0x4A + +#define W83791D_REG_ALARM1 0xA9 /* realtime status register1 */ +#define W83791D_REG_ALARM2 0xAA /* realtime status register2 */ +#define W83791D_REG_ALARM3 0xAB /* realtime status register3 */ + +#define W83791D_REG_VBAT 0x5D +#define W83791D_REG_I2C_ADDR 0x48 + +/* + * The SMBus locks itself. The Winbond W83791D has a bank select register + * (index 0x4e), but the driver only accesses registers in bank 0. Since + * we don't switch banks, we don't need any special code to handle + * locking access between bank switches + */ +static inline int w83791d_read(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static inline int w83791d_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* + * The analog voltage inputs have 16mV LSB. Since the sysfs output is + * in mV as would be measured on the chip input pin, need to just + * multiply/divide by 16 to translate from/to register values. + */ +#define IN_TO_REG(val) (clamp_val((((val) + 8) / 16), 0, 255)) +#define IN_FROM_REG(val) ((val) * 16) + +static u8 fan_to_reg(long rpm, int div) +{ + if (rpm == 0) + return 255; + rpm = clamp_val(rpm, 1, 1000000); + return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254); +} + +#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : \ + ((val) == 255 ? 0 : \ + 1350000 / ((val) * (div)))) + +/* for temp1 which is 8-bit resolution, LSB = 1 degree Celsius */ +#define TEMP1_FROM_REG(val) ((val) * 1000) +#define TEMP1_TO_REG(val) ((val) <= -128000 ? -128 : \ + (val) >= 127000 ? 127 : \ + (val) < 0 ? ((val) - 500) / 1000 : \ + ((val) + 500) / 1000) + +/* + * for temp2 and temp3 which are 9-bit resolution, LSB = 0.5 degree Celsius + * Assumes the top 8 bits are the integral amount and the bottom 8 bits + * are the fractional amount. Since we only have 0.5 degree resolution, + * the bottom 7 bits will always be zero + */ +#define TEMP23_FROM_REG(val) ((val) / 128 * 500) +#define TEMP23_TO_REG(val) (DIV_ROUND_CLOSEST(clamp_val((val), -128000, \ + 127500), 500) * 128) + +/* for thermal cruise target temp, 7-bits, LSB = 1 degree Celsius */ +#define TARGET_TEMP_TO_REG(val) DIV_ROUND_CLOSEST(clamp_val((val), 0, 127000), \ + 1000) + +/* for thermal cruise temp tolerance, 4-bits, LSB = 1 degree Celsius */ +#define TOL_TEMP_TO_REG(val) DIV_ROUND_CLOSEST(clamp_val((val), 0, 15000), \ + 1000) + +#define BEEP_MASK_TO_REG(val) ((val) & 0xffffff) +#define BEEP_MASK_FROM_REG(val) ((val) & 0xffffff) + +#define DIV_FROM_REG(val) (1 << (val)) + +static u8 div_to_reg(int nr, long val) +{ + int i; + + /* fan divisors max out at 128 */ + val = clamp_val(val, 1, 128) >> 1; + for (i = 0; i < 7; i++) { + if (val == 0) + break; + val >>= 1; + } + return (u8) i; +} + +struct w83791d_data { + struct device *hwmon_dev; + struct mutex update_lock; + + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + /* array of 2 pointers to subclients */ + struct i2c_client *lm75[2]; + + /* volts */ + u8 in[NUMBER_OF_VIN]; /* Register value */ + u8 in_max[NUMBER_OF_VIN]; /* Register value */ + u8 in_min[NUMBER_OF_VIN]; /* Register value */ + + /* fans */ + u8 fan[NUMBER_OF_FANIN]; /* Register value */ + u8 fan_min[NUMBER_OF_FANIN]; /* Register value */ + u8 fan_div[NUMBER_OF_FANIN]; /* Register encoding, shifted right */ + + /* Temperature sensors */ + + s8 temp1[3]; /* current, over, thyst */ + s16 temp_add[2][3]; /* fixed point value. Top 8 bits are the + * integral part, bottom 8 bits are the + * fractional part. We only use the top + * 9 bits as the resolution is only + * to the 0.5 degree C... + * two sensors with three values + * (cur, over, hyst) + */ + + /* PWMs */ + u8 pwm[5]; /* pwm duty cycle */ + u8 pwm_enable[3]; /* pwm enable status for fan 1-3 + * (fan 4-5 only support manual mode) + */ + + u8 temp_target[3]; /* pwm 1-3 target temperature */ + u8 temp_tolerance[3]; /* pwm 1-3 temperature tolerance */ + + /* Misc */ + u32 alarms; /* realtime status register encoding,combined */ + u8 beep_enable; /* Global beep enable */ + u32 beep_mask; /* Mask off specific beeps */ + u8 vid; /* Register encoding, combined */ + u8 vrm; /* hwmon-vid */ +}; + +static int w83791d_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int w83791d_detect(struct i2c_client *client, + struct i2c_board_info *info); +static int w83791d_remove(struct i2c_client *client); + +static int w83791d_read(struct i2c_client *client, u8 reg); +static int w83791d_write(struct i2c_client *client, u8 reg, u8 value); +static struct w83791d_data *w83791d_update_device(struct device *dev); + +#ifdef DEBUG +static void w83791d_print_debug(struct w83791d_data *data, struct device *dev); +#endif + +static void w83791d_init_client(struct i2c_client *client); + +static const struct i2c_device_id w83791d_id[] = { + { "w83791d", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, w83791d_id); + +static struct i2c_driver w83791d_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "w83791d", + }, + .probe = w83791d_probe, + .remove = w83791d_remove, + .id_table = w83791d_id, + .detect = w83791d_detect, + .address_list = normal_i2c, +}; + +/* following are the sysfs callback functions */ +#define show_in_reg(reg) \ +static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct sensor_device_attribute *sensor_attr = \ + to_sensor_dev_attr(attr); \ + struct w83791d_data *data = w83791d_update_device(dev); \ + int nr = sensor_attr->index; \ + return sprintf(buf, "%d\n", IN_FROM_REG(data->reg[nr])); \ +} + +show_in_reg(in); +show_in_reg(in_min); +show_in_reg(in_max); + +#define store_in_reg(REG, reg) \ +static ssize_t store_in_##reg(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct sensor_device_attribute *sensor_attr = \ + to_sensor_dev_attr(attr); \ + struct i2c_client *client = to_i2c_client(dev); \ + struct w83791d_data *data = i2c_get_clientdata(client); \ + int nr = sensor_attr->index; \ + unsigned long val; \ + int err = kstrtoul(buf, 10, &val); \ + if (err) \ + return err; \ + mutex_lock(&data->update_lock); \ + data->in_##reg[nr] = IN_TO_REG(val); \ + w83791d_write(client, W83791D_REG_IN_##REG[nr], data->in_##reg[nr]); \ + mutex_unlock(&data->update_lock); \ + \ + return count; \ +} +store_in_reg(MIN, min); +store_in_reg(MAX, max); + +static struct sensor_device_attribute sda_in_input[] = { + SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0), + SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1), + SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2), + SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3), + SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4), + SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5), + SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6), + SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7), + SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8), + SENSOR_ATTR(in9_input, S_IRUGO, show_in, NULL, 9), +}; + +static struct sensor_device_attribute sda_in_min[] = { + SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0), + SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1), + SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2), + SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 3), + SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 4), + SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 5), + SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 6), + SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 7), + SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 8), + SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 9), +}; + +static struct sensor_device_attribute sda_in_max[] = { + SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0), + SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1), + SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2), + SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 3), + SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 4), + SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 5), + SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 6), + SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 7), + SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 8), + SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 9), +}; + + +static ssize_t show_beep(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = + to_sensor_dev_attr(attr); + struct w83791d_data *data = w83791d_update_device(dev); + int bitnr = sensor_attr->index; + + return sprintf(buf, "%d\n", (data->beep_mask >> bitnr) & 1); +} + +static ssize_t store_beep(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = + to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int bitnr = sensor_attr->index; + int bytenr = bitnr / 8; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + val = val ? 1 : 0; + + mutex_lock(&data->update_lock); + + data->beep_mask &= ~(0xff << (bytenr * 8)); + data->beep_mask |= w83791d_read(client, W83791D_REG_BEEP_CTRL[bytenr]) + << (bytenr * 8); + + data->beep_mask &= ~(1 << bitnr); + data->beep_mask |= val << bitnr; + + w83791d_write(client, W83791D_REG_BEEP_CTRL[bytenr], + (data->beep_mask >> (bytenr * 8)) & 0xff); + + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = + to_sensor_dev_attr(attr); + struct w83791d_data *data = w83791d_update_device(dev); + int bitnr = sensor_attr->index; + + return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); +} + +/* + * Note: The bitmask for the beep enable/disable is different than + * the bitmask for the alarm. + */ +static struct sensor_device_attribute sda_in_beep[] = { + SENSOR_ATTR(in0_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 0), + SENSOR_ATTR(in1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 13), + SENSOR_ATTR(in2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 2), + SENSOR_ATTR(in3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 3), + SENSOR_ATTR(in4_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 8), + SENSOR_ATTR(in5_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 9), + SENSOR_ATTR(in6_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 10), + SENSOR_ATTR(in7_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 16), + SENSOR_ATTR(in8_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 17), + SENSOR_ATTR(in9_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 14), +}; + +static struct sensor_device_attribute sda_in_alarm[] = { + SENSOR_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0), + SENSOR_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1), + SENSOR_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2), + SENSOR_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3), + SENSOR_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8), + SENSOR_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9), + SENSOR_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10), + SENSOR_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 19), + SENSOR_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 20), + SENSOR_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 14), +}; + +#define show_fan_reg(reg) \ +static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct sensor_device_attribute *sensor_attr = \ + to_sensor_dev_attr(attr); \ + struct w83791d_data *data = w83791d_update_device(dev); \ + int nr = sensor_attr->index; \ + return sprintf(buf, "%d\n", \ + FAN_FROM_REG(data->reg[nr], DIV_FROM_REG(data->fan_div[nr]))); \ +} + +show_fan_reg(fan); +show_fan_reg(fan_min); + +static ssize_t store_fan_min(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int nr = sensor_attr->index; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->fan_min[nr] = fan_to_reg(val, DIV_FROM_REG(data->fan_div[nr])); + w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct w83791d_data *data = w83791d_update_device(dev); + return sprintf(buf, "%u\n", DIV_FROM_REG(data->fan_div[nr])); +} + +/* + * Note: we save and restore the fan minimum here, because its value is + * determined in part by the fan divisor. This follows the principle of + * least surprise; the user doesn't expect the fan minimum to change just + * because the divisor changed. + */ +static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int nr = sensor_attr->index; + unsigned long min; + u8 tmp_fan_div; + u8 fan_div_reg; + u8 vbat_reg; + int indx = 0; + u8 keep_mask = 0; + u8 new_shift = 0; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + /* Save fan_min */ + min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); + + mutex_lock(&data->update_lock); + data->fan_div[nr] = div_to_reg(nr, val); + + switch (nr) { + case 0: + indx = 0; + keep_mask = 0xcf; + new_shift = 4; + break; + case 1: + indx = 0; + keep_mask = 0x3f; + new_shift = 6; + break; + case 2: + indx = 1; + keep_mask = 0x3f; + new_shift = 6; + break; + case 3: + indx = 2; + keep_mask = 0xf8; + new_shift = 0; + break; + case 4: + indx = 2; + keep_mask = 0x8f; + new_shift = 4; + break; +#ifdef DEBUG + default: + dev_warn(dev, "store_fan_div: Unexpected nr seen: %d\n", nr); + count = -EINVAL; + goto err_exit; +#endif + } + + fan_div_reg = w83791d_read(client, W83791D_REG_FAN_DIV[indx]) + & keep_mask; + tmp_fan_div = (data->fan_div[nr] << new_shift) & ~keep_mask; + + w83791d_write(client, W83791D_REG_FAN_DIV[indx], + fan_div_reg | tmp_fan_div); + + /* Bit 2 of fans 0-2 is stored in the vbat register (bits 5-7) */ + if (nr < 3) { + keep_mask = ~(1 << (nr + 5)); + vbat_reg = w83791d_read(client, W83791D_REG_VBAT) + & keep_mask; + tmp_fan_div = (data->fan_div[nr] << (3 + nr)) & ~keep_mask; + w83791d_write(client, W83791D_REG_VBAT, + vbat_reg | tmp_fan_div); + } + + /* Restore fan_min */ + data->fan_min[nr] = fan_to_reg(min, DIV_FROM_REG(data->fan_div[nr])); + w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]); + +#ifdef DEBUG +err_exit: +#endif + mutex_unlock(&data->update_lock); + + return count; +} + +static struct sensor_device_attribute sda_fan_input[] = { + SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0), + SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1), + SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2), + SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3), + SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4), +}; + +static struct sensor_device_attribute sda_fan_min[] = { + SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, + show_fan_min, store_fan_min, 0), + SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, + show_fan_min, store_fan_min, 1), + SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, + show_fan_min, store_fan_min, 2), + SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO, + show_fan_min, store_fan_min, 3), + SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO, + show_fan_min, store_fan_min, 4), +}; + +static struct sensor_device_attribute sda_fan_div[] = { + SENSOR_ATTR(fan1_div, S_IWUSR | S_IRUGO, + show_fan_div, store_fan_div, 0), + SENSOR_ATTR(fan2_div, S_IWUSR | S_IRUGO, + show_fan_div, store_fan_div, 1), + SENSOR_ATTR(fan3_div, S_IWUSR | S_IRUGO, + show_fan_div, store_fan_div, 2), + SENSOR_ATTR(fan4_div, S_IWUSR | S_IRUGO, + show_fan_div, store_fan_div, 3), + SENSOR_ATTR(fan5_div, S_IWUSR | S_IRUGO, + show_fan_div, store_fan_div, 4), +}; + +static struct sensor_device_attribute sda_fan_beep[] = { + SENSOR_ATTR(fan1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 6), + SENSOR_ATTR(fan2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 7), + SENSOR_ATTR(fan3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 11), + SENSOR_ATTR(fan4_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 21), + SENSOR_ATTR(fan5_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 22), +}; + +static struct sensor_device_attribute sda_fan_alarm[] = { + SENSOR_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6), + SENSOR_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7), + SENSOR_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11), + SENSOR_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 21), + SENSOR_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22), +}; + +/* read/write PWMs */ +static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct w83791d_data *data = w83791d_update_device(dev); + return sprintf(buf, "%u\n", data->pwm[nr]); +} + +static ssize_t store_pwm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int nr = sensor_attr->index; + unsigned long val; + + if (kstrtoul(buf, 10, &val)) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->pwm[nr] = clamp_val(val, 0, 255); + w83791d_write(client, W83791D_REG_PWM[nr], data->pwm[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +static struct sensor_device_attribute sda_pwm[] = { + SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, + show_pwm, store_pwm, 0), + SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, + show_pwm, store_pwm, 1), + SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, + show_pwm, store_pwm, 2), + SENSOR_ATTR(pwm4, S_IWUSR | S_IRUGO, + show_pwm, store_pwm, 3), + SENSOR_ATTR(pwm5, S_IWUSR | S_IRUGO, + show_pwm, store_pwm, 4), +}; + +static ssize_t show_pwmenable(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct w83791d_data *data = w83791d_update_device(dev); + return sprintf(buf, "%u\n", data->pwm_enable[nr] + 1); +} + +static ssize_t store_pwmenable(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int nr = sensor_attr->index; + unsigned long val; + u8 reg_cfg_tmp; + u8 reg_idx = 0; + u8 val_shift = 0; + u8 keep_mask = 0; + + int ret = kstrtoul(buf, 10, &val); + + if (ret || val < 1 || val > 3) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->pwm_enable[nr] = val - 1; + switch (nr) { + case 0: + reg_idx = 0; + val_shift = 2; + keep_mask = 0xf3; + break; + case 1: + reg_idx = 0; + val_shift = 4; + keep_mask = 0xcf; + break; + case 2: + reg_idx = 1; + val_shift = 2; + keep_mask = 0xf3; + break; + } + + reg_cfg_tmp = w83791d_read(client, W83791D_REG_FAN_CFG[reg_idx]); + reg_cfg_tmp = (reg_cfg_tmp & keep_mask) | + data->pwm_enable[nr] << val_shift; + + w83791d_write(client, W83791D_REG_FAN_CFG[reg_idx], reg_cfg_tmp); + mutex_unlock(&data->update_lock); + + return count; +} +static struct sensor_device_attribute sda_pwmenable[] = { + SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, + show_pwmenable, store_pwmenable, 0), + SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, + show_pwmenable, store_pwmenable, 1), + SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, + show_pwmenable, store_pwmenable, 2), +}; + +/* For Smart Fan I / Thermal Cruise */ +static ssize_t show_temp_target(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct w83791d_data *data = w83791d_update_device(dev); + int nr = sensor_attr->index; + return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp_target[nr])); +} + +static ssize_t store_temp_target(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int nr = sensor_attr->index; + long val; + u8 target_mask; + + if (kstrtol(buf, 10, &val)) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->temp_target[nr] = TARGET_TEMP_TO_REG(val); + target_mask = w83791d_read(client, + W83791D_REG_TEMP_TARGET[nr]) & 0x80; + w83791d_write(client, W83791D_REG_TEMP_TARGET[nr], + data->temp_target[nr] | target_mask); + mutex_unlock(&data->update_lock); + return count; +} + +static struct sensor_device_attribute sda_temp_target[] = { + SENSOR_ATTR(temp1_target, S_IWUSR | S_IRUGO, + show_temp_target, store_temp_target, 0), + SENSOR_ATTR(temp2_target, S_IWUSR | S_IRUGO, + show_temp_target, store_temp_target, 1), + SENSOR_ATTR(temp3_target, S_IWUSR | S_IRUGO, + show_temp_target, store_temp_target, 2), +}; + +static ssize_t show_temp_tolerance(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct w83791d_data *data = w83791d_update_device(dev); + int nr = sensor_attr->index; + return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp_tolerance[nr])); +} + +static ssize_t store_temp_tolerance(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int nr = sensor_attr->index; + unsigned long val; + u8 target_mask; + u8 reg_idx = 0; + u8 val_shift = 0; + u8 keep_mask = 0; + + if (kstrtoul(buf, 10, &val)) + return -EINVAL; + + switch (nr) { + case 0: + reg_idx = 0; + val_shift = 0; + keep_mask = 0xf0; + break; + case 1: + reg_idx = 0; + val_shift = 4; + keep_mask = 0x0f; + break; + case 2: + reg_idx = 1; + val_shift = 0; + keep_mask = 0xf0; + break; + } + + mutex_lock(&data->update_lock); + data->temp_tolerance[nr] = TOL_TEMP_TO_REG(val); + target_mask = w83791d_read(client, + W83791D_REG_TEMP_TOL[reg_idx]) & keep_mask; + w83791d_write(client, W83791D_REG_TEMP_TOL[reg_idx], + (data->temp_tolerance[nr] << val_shift) | target_mask); + mutex_unlock(&data->update_lock); + return count; +} + +static struct sensor_device_attribute sda_temp_tolerance[] = { + SENSOR_ATTR(temp1_tolerance, S_IWUSR | S_IRUGO, + show_temp_tolerance, store_temp_tolerance, 0), + SENSOR_ATTR(temp2_tolerance, S_IWUSR | S_IRUGO, + show_temp_tolerance, store_temp_tolerance, 1), + SENSOR_ATTR(temp3_tolerance, S_IWUSR | S_IRUGO, + show_temp_tolerance, store_temp_tolerance, 2), +}; + +/* read/write the temperature1, includes measured value and limits */ +static ssize_t show_temp1(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct w83791d_data *data = w83791d_update_device(dev); + return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp1[attr->index])); +} + +static ssize_t store_temp1(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int nr = attr->index; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->temp1[nr] = TEMP1_TO_REG(val); + w83791d_write(client, W83791D_REG_TEMP1[nr], data->temp1[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +/* read/write temperature2-3, includes measured value and limits */ +static ssize_t show_temp23(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); + struct w83791d_data *data = w83791d_update_device(dev); + int nr = attr->nr; + int index = attr->index; + return sprintf(buf, "%d\n", TEMP23_FROM_REG(data->temp_add[nr][index])); +} + +static ssize_t store_temp23(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + long val; + int err; + int nr = attr->nr; + int index = attr->index; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->temp_add[nr][index] = TEMP23_TO_REG(val); + w83791d_write(client, W83791D_REG_TEMP_ADD[nr][index * 2], + data->temp_add[nr][index] >> 8); + w83791d_write(client, W83791D_REG_TEMP_ADD[nr][index * 2 + 1], + data->temp_add[nr][index] & 0x80); + mutex_unlock(&data->update_lock); + + return count; +} + +static struct sensor_device_attribute_2 sda_temp_input[] = { + SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp1, NULL, 0, 0), + SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp23, NULL, 0, 0), + SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp23, NULL, 1, 0), +}; + +static struct sensor_device_attribute_2 sda_temp_max[] = { + SENSOR_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, + show_temp1, store_temp1, 0, 1), + SENSOR_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, + show_temp23, store_temp23, 0, 1), + SENSOR_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, + show_temp23, store_temp23, 1, 1), +}; + +static struct sensor_device_attribute_2 sda_temp_max_hyst[] = { + SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR, + show_temp1, store_temp1, 0, 2), + SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR, + show_temp23, store_temp23, 0, 2), + SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO | S_IWUSR, + show_temp23, store_temp23, 1, 2), +}; + +/* + * Note: The bitmask for the beep enable/disable is different than + * the bitmask for the alarm. + */ +static struct sensor_device_attribute sda_temp_beep[] = { + SENSOR_ATTR(temp1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 4), + SENSOR_ATTR(temp2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 5), + SENSOR_ATTR(temp3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 1), +}; + +static struct sensor_device_attribute sda_temp_alarm[] = { + SENSOR_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4), + SENSOR_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5), + SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13), +}; + +/* get realtime status of all sensors items: voltage, temp, fan */ +static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct w83791d_data *data = w83791d_update_device(dev); + return sprintf(buf, "%u\n", data->alarms); +} + +static DEVICE_ATTR_RO(alarms); + +/* Beep control */ + +#define GLOBAL_BEEP_ENABLE_SHIFT 15 +#define GLOBAL_BEEP_ENABLE_MASK (1 << GLOBAL_BEEP_ENABLE_SHIFT) + +static ssize_t show_beep_enable(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct w83791d_data *data = w83791d_update_device(dev); + return sprintf(buf, "%d\n", data->beep_enable); +} + +static ssize_t show_beep_mask(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct w83791d_data *data = w83791d_update_device(dev); + return sprintf(buf, "%d\n", BEEP_MASK_FROM_REG(data->beep_mask)); +} + + +static ssize_t store_beep_mask(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int i; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + + /* + * The beep_enable state overrides any enabling request from + * the masks + */ + data->beep_mask = BEEP_MASK_TO_REG(val) & ~GLOBAL_BEEP_ENABLE_MASK; + data->beep_mask |= (data->beep_enable << GLOBAL_BEEP_ENABLE_SHIFT); + + val = data->beep_mask; + + for (i = 0; i < 3; i++) { + w83791d_write(client, W83791D_REG_BEEP_CTRL[i], (val & 0xff)); + val >>= 8; + } + + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t store_beep_enable(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + + data->beep_enable = val ? 1 : 0; + + /* Keep the full mask value in sync with the current enable */ + data->beep_mask &= ~GLOBAL_BEEP_ENABLE_MASK; + data->beep_mask |= (data->beep_enable << GLOBAL_BEEP_ENABLE_SHIFT); + + /* + * The global control is in the second beep control register + * so only need to update that register + */ + val = (data->beep_mask >> 8) & 0xff; + + w83791d_write(client, W83791D_REG_BEEP_CTRL[1], val); + + mutex_unlock(&data->update_lock); + + return count; +} + +static struct sensor_device_attribute sda_beep_ctrl[] = { + SENSOR_ATTR(beep_enable, S_IRUGO | S_IWUSR, + show_beep_enable, store_beep_enable, 0), + SENSOR_ATTR(beep_mask, S_IRUGO | S_IWUSR, + show_beep_mask, store_beep_mask, 1) +}; + +/* cpu voltage regulation information */ +static ssize_t cpu0_vid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct w83791d_data *data = w83791d_update_device(dev); + return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); +} + +static DEVICE_ATTR_RO(cpu0_vid); + +static ssize_t vrm_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct w83791d_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", data->vrm); +} + +static ssize_t vrm_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct w83791d_data *data = dev_get_drvdata(dev); + unsigned long val; + int err; + + /* + * No lock needed as vrm is internal to the driver + * (not read from a chip register) and so is not + * updated in w83791d_update_device() + */ + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + if (val > 255) + return -EINVAL; + + data->vrm = val; + return count; +} + +static DEVICE_ATTR_RW(vrm); + +#define IN_UNIT_ATTRS(X) \ + &sda_in_input[X].dev_attr.attr, \ + &sda_in_min[X].dev_attr.attr, \ + &sda_in_max[X].dev_attr.attr, \ + &sda_in_beep[X].dev_attr.attr, \ + &sda_in_alarm[X].dev_attr.attr + +#define FAN_UNIT_ATTRS(X) \ + &sda_fan_input[X].dev_attr.attr, \ + &sda_fan_min[X].dev_attr.attr, \ + &sda_fan_div[X].dev_attr.attr, \ + &sda_fan_beep[X].dev_attr.attr, \ + &sda_fan_alarm[X].dev_attr.attr + +#define TEMP_UNIT_ATTRS(X) \ + &sda_temp_input[X].dev_attr.attr, \ + &sda_temp_max[X].dev_attr.attr, \ + &sda_temp_max_hyst[X].dev_attr.attr, \ + &sda_temp_beep[X].dev_attr.attr, \ + &sda_temp_alarm[X].dev_attr.attr + +static struct attribute *w83791d_attributes[] = { + IN_UNIT_ATTRS(0), + IN_UNIT_ATTRS(1), + IN_UNIT_ATTRS(2), + IN_UNIT_ATTRS(3), + IN_UNIT_ATTRS(4), + IN_UNIT_ATTRS(5), + IN_UNIT_ATTRS(6), + IN_UNIT_ATTRS(7), + IN_UNIT_ATTRS(8), + IN_UNIT_ATTRS(9), + FAN_UNIT_ATTRS(0), + FAN_UNIT_ATTRS(1), + FAN_UNIT_ATTRS(2), + TEMP_UNIT_ATTRS(0), + TEMP_UNIT_ATTRS(1), + TEMP_UNIT_ATTRS(2), + &dev_attr_alarms.attr, + &sda_beep_ctrl[0].dev_attr.attr, + &sda_beep_ctrl[1].dev_attr.attr, + &dev_attr_cpu0_vid.attr, + &dev_attr_vrm.attr, + &sda_pwm[0].dev_attr.attr, + &sda_pwm[1].dev_attr.attr, + &sda_pwm[2].dev_attr.attr, + &sda_pwmenable[0].dev_attr.attr, + &sda_pwmenable[1].dev_attr.attr, + &sda_pwmenable[2].dev_attr.attr, + &sda_temp_target[0].dev_attr.attr, + &sda_temp_target[1].dev_attr.attr, + &sda_temp_target[2].dev_attr.attr, + &sda_temp_tolerance[0].dev_attr.attr, + &sda_temp_tolerance[1].dev_attr.attr, + &sda_temp_tolerance[2].dev_attr.attr, + NULL +}; + +static const struct attribute_group w83791d_group = { + .attrs = w83791d_attributes, +}; + +/* + * Separate group of attributes for fan/pwm 4-5. Their pins can also be + * in use for GPIO in which case their sysfs-interface should not be made + * available + */ +static struct attribute *w83791d_attributes_fanpwm45[] = { + FAN_UNIT_ATTRS(3), + FAN_UNIT_ATTRS(4), + &sda_pwm[3].dev_attr.attr, + &sda_pwm[4].dev_attr.attr, + NULL +}; + +static const struct attribute_group w83791d_group_fanpwm45 = { + .attrs = w83791d_attributes_fanpwm45, +}; + +static int w83791d_detect_subclients(struct i2c_client *client) +{ + struct i2c_adapter *adapter = client->adapter; + struct w83791d_data *data = i2c_get_clientdata(client); + int address = client->addr; + int i, id, err; + u8 val; + + id = i2c_adapter_id(adapter); + if (force_subclients[0] == id && force_subclients[1] == address) { + for (i = 2; i <= 3; i++) { + if (force_subclients[i] < 0x48 || + force_subclients[i] > 0x4f) { + dev_err(&client->dev, + "invalid subclient " + "address %d; must be 0x48-0x4f\n", + force_subclients[i]); + err = -ENODEV; + goto error_sc_0; + } + } + w83791d_write(client, W83791D_REG_I2C_SUBADDR, + (force_subclients[2] & 0x07) | + ((force_subclients[3] & 0x07) << 4)); + } + + val = w83791d_read(client, W83791D_REG_I2C_SUBADDR); + if (!(val & 0x08)) + data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7)); + if (!(val & 0x80)) { + if ((data->lm75[0] != NULL) && + ((val & 0x7) == ((val >> 4) & 0x7))) { + dev_err(&client->dev, + "duplicate addresses 0x%x, " + "use force_subclient\n", + data->lm75[0]->addr); + err = -ENODEV; + goto error_sc_1; + } + data->lm75[1] = i2c_new_dummy(adapter, + 0x48 + ((val >> 4) & 0x7)); + } + + return 0; + +/* Undo inits in case of errors */ + +error_sc_1: + i2c_unregister_device(data->lm75[0]); +error_sc_0: + return err; +} + + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int w83791d_detect(struct i2c_client *client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + int val1, val2; + unsigned short address = client->addr; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) + return -ENODEV; + + val1 = w83791d_read(client, W83791D_REG_BANK); + val2 = w83791d_read(client, W83791D_REG_CHIPMAN); + /* Check for Winbond ID if in bank 0 */ + if (!(val1 & 0x07)) { + if ((!(val1 & 0x80) && val2 != 0xa3) || + ((val1 & 0x80) && val2 != 0x5c)) { + return -ENODEV; + } + } + /* + * If Winbond chip, address of chip and W83791D_REG_I2C_ADDR + * should match + */ + if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) + return -ENODEV; + + /* We want bank 0 and Vendor ID high byte */ + val1 = w83791d_read(client, W83791D_REG_BANK) & 0x78; + w83791d_write(client, W83791D_REG_BANK, val1 | 0x80); + + /* Verify it is a Winbond w83791d */ + val1 = w83791d_read(client, W83791D_REG_WCHIPID); + val2 = w83791d_read(client, W83791D_REG_CHIPMAN); + if (val1 != 0x71 || val2 != 0x5c) + return -ENODEV; + + strlcpy(info->type, "w83791d", I2C_NAME_SIZE); + + return 0; +} + +static int w83791d_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct w83791d_data *data; + struct device *dev = &client->dev; + int i, err; + u8 has_fanpwm45; + +#ifdef DEBUG + int val1; + val1 = w83791d_read(client, W83791D_REG_DID_VID4); + dev_dbg(dev, "Device ID version: %d.%d (0x%02x)\n", + (val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1); +#endif + + data = devm_kzalloc(&client->dev, sizeof(struct w83791d_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + err = w83791d_detect_subclients(client); + if (err) + return err; + + /* Initialize the chip */ + w83791d_init_client(client); + + /* + * If the fan_div is changed, make sure there is a rational + * fan_min in place + */ + for (i = 0; i < NUMBER_OF_FANIN; i++) + data->fan_min[i] = w83791d_read(client, W83791D_REG_FAN_MIN[i]); + + /* Register sysfs hooks */ + err = sysfs_create_group(&client->dev.kobj, &w83791d_group); + if (err) + goto error3; + + /* Check if pins of fan/pwm 4-5 are in use as GPIO */ + has_fanpwm45 = w83791d_read(client, W83791D_REG_GPIO) & 0x10; + if (has_fanpwm45) { + err = sysfs_create_group(&client->dev.kobj, + &w83791d_group_fanpwm45); + if (err) + goto error4; + } + + /* Everything is ready, now register the working device */ + data->hwmon_dev = hwmon_device_register(dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto error5; + } + + return 0; + +error5: + if (has_fanpwm45) + sysfs_remove_group(&client->dev.kobj, &w83791d_group_fanpwm45); +error4: + sysfs_remove_group(&client->dev.kobj, &w83791d_group); +error3: + i2c_unregister_device(data->lm75[0]); + i2c_unregister_device(data->lm75[1]); + return err; +} + +static int w83791d_remove(struct i2c_client *client) +{ + struct w83791d_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &w83791d_group); + + i2c_unregister_device(data->lm75[0]); + i2c_unregister_device(data->lm75[1]); + + return 0; +} + +static void w83791d_init_client(struct i2c_client *client) +{ + struct w83791d_data *data = i2c_get_clientdata(client); + u8 tmp; + u8 old_beep; + + /* + * The difference between reset and init is that reset + * does a hard reset of the chip via index 0x40, bit 7, + * but init simply forces certain registers to have "sane" + * values. The hope is that the BIOS has done the right + * thing (which is why the default is reset=0, init=0), + * but if not, reset is the hard hammer and init + * is the soft mallet both of which are trying to whack + * things into place... + * NOTE: The data sheet makes a distinction between + * "power on defaults" and "reset by MR". As far as I can tell, + * the hard reset puts everything into a power-on state so I'm + * not sure what "reset by MR" means or how it can happen. + */ + if (reset || init) { + /* keep some BIOS settings when we... */ + old_beep = w83791d_read(client, W83791D_REG_BEEP_CONFIG); + + if (reset) { + /* ... reset the chip and ... */ + w83791d_write(client, W83791D_REG_CONFIG, 0x80); + } + + /* ... disable power-on abnormal beep */ + w83791d_write(client, W83791D_REG_BEEP_CONFIG, old_beep | 0x80); + + /* disable the global beep (not done by hard reset) */ + tmp = w83791d_read(client, W83791D_REG_BEEP_CTRL[1]); + w83791d_write(client, W83791D_REG_BEEP_CTRL[1], tmp & 0xef); + + if (init) { + /* Make sure monitoring is turned on for add-ons */ + tmp = w83791d_read(client, W83791D_REG_TEMP2_CONFIG); + if (tmp & 1) { + w83791d_write(client, W83791D_REG_TEMP2_CONFIG, + tmp & 0xfe); + } + + tmp = w83791d_read(client, W83791D_REG_TEMP3_CONFIG); + if (tmp & 1) { + w83791d_write(client, W83791D_REG_TEMP3_CONFIG, + tmp & 0xfe); + } + + /* Start monitoring */ + tmp = w83791d_read(client, W83791D_REG_CONFIG) & 0xf7; + w83791d_write(client, W83791D_REG_CONFIG, tmp | 0x01); + } + } + + data->vrm = vid_which_vrm(); +} + +static struct w83791d_data *w83791d_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int i, j; + u8 reg_array_tmp[3]; + u8 vbat_reg; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + (HZ * 3)) + || !data->valid) { + dev_dbg(dev, "Starting w83791d device update\n"); + + /* Update the voltages measured value and limits */ + for (i = 0; i < NUMBER_OF_VIN; i++) { + data->in[i] = w83791d_read(client, + W83791D_REG_IN[i]); + data->in_max[i] = w83791d_read(client, + W83791D_REG_IN_MAX[i]); + data->in_min[i] = w83791d_read(client, + W83791D_REG_IN_MIN[i]); + } + + /* Update the fan counts and limits */ + for (i = 0; i < NUMBER_OF_FANIN; i++) { + /* Update the Fan measured value and limits */ + data->fan[i] = w83791d_read(client, + W83791D_REG_FAN[i]); + data->fan_min[i] = w83791d_read(client, + W83791D_REG_FAN_MIN[i]); + } + + /* Update the fan divisor */ + for (i = 0; i < 3; i++) { + reg_array_tmp[i] = w83791d_read(client, + W83791D_REG_FAN_DIV[i]); + } + data->fan_div[0] = (reg_array_tmp[0] >> 4) & 0x03; + data->fan_div[1] = (reg_array_tmp[0] >> 6) & 0x03; + data->fan_div[2] = (reg_array_tmp[1] >> 6) & 0x03; + data->fan_div[3] = reg_array_tmp[2] & 0x07; + data->fan_div[4] = (reg_array_tmp[2] >> 4) & 0x07; + + /* + * The fan divisor for fans 0-2 get bit 2 from + * bits 5-7 respectively of vbat register + */ + vbat_reg = w83791d_read(client, W83791D_REG_VBAT); + for (i = 0; i < 3; i++) + data->fan_div[i] |= (vbat_reg >> (3 + i)) & 0x04; + + /* Update PWM duty cycle */ + for (i = 0; i < NUMBER_OF_PWM; i++) { + data->pwm[i] = w83791d_read(client, + W83791D_REG_PWM[i]); + } + + /* Update PWM enable status */ + for (i = 0; i < 2; i++) { + reg_array_tmp[i] = w83791d_read(client, + W83791D_REG_FAN_CFG[i]); + } + data->pwm_enable[0] = (reg_array_tmp[0] >> 2) & 0x03; + data->pwm_enable[1] = (reg_array_tmp[0] >> 4) & 0x03; + data->pwm_enable[2] = (reg_array_tmp[1] >> 2) & 0x03; + + /* Update PWM target temperature */ + for (i = 0; i < 3; i++) { + data->temp_target[i] = w83791d_read(client, + W83791D_REG_TEMP_TARGET[i]) & 0x7f; + } + + /* Update PWM temperature tolerance */ + for (i = 0; i < 2; i++) { + reg_array_tmp[i] = w83791d_read(client, + W83791D_REG_TEMP_TOL[i]); + } + data->temp_tolerance[0] = reg_array_tmp[0] & 0x0f; + data->temp_tolerance[1] = (reg_array_tmp[0] >> 4) & 0x0f; + data->temp_tolerance[2] = reg_array_tmp[1] & 0x0f; + + /* Update the first temperature sensor */ + for (i = 0; i < 3; i++) { + data->temp1[i] = w83791d_read(client, + W83791D_REG_TEMP1[i]); + } + + /* Update the rest of the temperature sensors */ + for (i = 0; i < 2; i++) { + for (j = 0; j < 3; j++) { + data->temp_add[i][j] = + (w83791d_read(client, + W83791D_REG_TEMP_ADD[i][j * 2]) << 8) | + w83791d_read(client, + W83791D_REG_TEMP_ADD[i][j * 2 + 1]); + } + } + + /* Update the realtime status */ + data->alarms = + w83791d_read(client, W83791D_REG_ALARM1) + + (w83791d_read(client, W83791D_REG_ALARM2) << 8) + + (w83791d_read(client, W83791D_REG_ALARM3) << 16); + + /* Update the beep configuration information */ + data->beep_mask = + w83791d_read(client, W83791D_REG_BEEP_CTRL[0]) + + (w83791d_read(client, W83791D_REG_BEEP_CTRL[1]) << 8) + + (w83791d_read(client, W83791D_REG_BEEP_CTRL[2]) << 16); + + /* Extract global beep enable flag */ + data->beep_enable = + (data->beep_mask >> GLOBAL_BEEP_ENABLE_SHIFT) & 0x01; + + /* Update the cpu voltage information */ + i = w83791d_read(client, W83791D_REG_VID_FANDIV); + data->vid = i & 0x0f; + data->vid |= (w83791d_read(client, W83791D_REG_DID_VID4) & 0x01) + << 4; + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + +#ifdef DEBUG + w83791d_print_debug(data, dev); +#endif + + return data; +} + +#ifdef DEBUG +static void w83791d_print_debug(struct w83791d_data *data, struct device *dev) +{ + int i = 0, j = 0; + + dev_dbg(dev, "======Start of w83791d debug values======\n"); + dev_dbg(dev, "%d set of Voltages: ===>\n", NUMBER_OF_VIN); + for (i = 0; i < NUMBER_OF_VIN; i++) { + dev_dbg(dev, "vin[%d] is: 0x%02x\n", i, data->in[i]); + dev_dbg(dev, "vin[%d] min is: 0x%02x\n", i, data->in_min[i]); + dev_dbg(dev, "vin[%d] max is: 0x%02x\n", i, data->in_max[i]); + } + dev_dbg(dev, "%d set of Fan Counts/Divisors: ===>\n", NUMBER_OF_FANIN); + for (i = 0; i < NUMBER_OF_FANIN; i++) { + dev_dbg(dev, "fan[%d] is: 0x%02x\n", i, data->fan[i]); + dev_dbg(dev, "fan[%d] min is: 0x%02x\n", i, data->fan_min[i]); + dev_dbg(dev, "fan_div[%d] is: 0x%02x\n", i, data->fan_div[i]); + } + + /* + * temperature math is signed, but only print out the + * bits that matter + */ + dev_dbg(dev, "%d set of Temperatures: ===>\n", NUMBER_OF_TEMPIN); + for (i = 0; i < 3; i++) + dev_dbg(dev, "temp1[%d] is: 0x%02x\n", i, (u8) data->temp1[i]); + for (i = 0; i < 2; i++) { + for (j = 0; j < 3; j++) { + dev_dbg(dev, "temp_add[%d][%d] is: 0x%04x\n", i, j, + (u16) data->temp_add[i][j]); + } + } + + dev_dbg(dev, "Misc Information: ===>\n"); + dev_dbg(dev, "alarm is: 0x%08x\n", data->alarms); + dev_dbg(dev, "beep_mask is: 0x%08x\n", data->beep_mask); + dev_dbg(dev, "beep_enable is: %d\n", data->beep_enable); + dev_dbg(dev, "vid is: 0x%02x\n", data->vid); + dev_dbg(dev, "vrm is: 0x%02x\n", data->vrm); + dev_dbg(dev, "=======End of w83791d debug values========\n"); + dev_dbg(dev, "\n"); +} +#endif + +module_i2c_driver(w83791d_driver); + +MODULE_AUTHOR("Charles Spirakis <bezaur@gmail.com>"); +MODULE_DESCRIPTION("W83791D driver"); +MODULE_LICENSE("GPL"); |